1 files changed, 116 insertions, 0 deletions

diff --git a/include/asm-arm/arch-imx/irqs.h b/include/asm-arm/arch-imx/irqs.h
new file mode 100644
index 000000000000..238197cfb9d9
--- /dev/null
+++ b/include/asm-arm/arch-imx/irqs.h
@@ -0,0 +1,116 @@
+/*
+ *  linux/include/asm-arm/arch-imxads/irqs.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ARM_IRQS_H__
+#define __ARM_IRQS_H__
+
+/* Use the imx definitions */
+#include <asm/arch/hardware.h>
+
+/*
+ *  IMX Interrupt numbers
+ *
+ */
+#define INT_SOFTINT                 0
+#define CSI_INT                     6
+#define DSPA_MAC_INT                7
+#define DSPA_INT                    8
+#define COMP_INT                    9
+#define MSHC_XINT                   10
+#define GPIO_INT_PORTA              11
+#define GPIO_INT_PORTB              12
+#define GPIO_INT_PORTC              13
+#define LCDC_INT                    14
+#define SIM_INT                     15
+#define SIM_DATA_INT                16
+#define RTC_INT                     17
+#define RTC_SAMINT                  18
+#define UART2_MINT_PFERR            19
+#define UART2_MINT_RTS              20
+#define UART2_MINT_DTR              21
+#define UART2_MINT_UARTC            22
+#define UART2_MINT_TX               23
+#define UART2_MINT_RX               24
+#define UART1_MINT_PFERR            25
+#define UART1_MINT_RTS              26
+#define UART1_MINT_DTR              27
+#define UART1_MINT_UARTC            28
+#define UART1_MINT_TX               29
+#define UART1_MINT_RX               30
+#define VOICE_DAC_INT               31
+#define VOICE_ADC_INT               32
+#define PEN_DATA_INT                33
+#define PWM_INT                     34
+#define SDHC_INT                    35
+#define I2C_INT                     39
+#define CSPI_INT                    41
+#define SSI_TX_INT                  42
+#define SSI_TX_ERR_INT              43
+#define SSI_RX_INT                  44
+#define SSI_RX_ERR_INT              45
+#define TOUCH_INT                   46
+#define USBD_INT0                   47
+#define USBD_INT1                   48
+#define USBD_INT2                   49
+#define USBD_INT3                   50
+#define USBD_INT4                   51
+#define USBD_INT5                   52
+#define USBD_INT6                   53
+#define BTSYS_INT                   55
+#define BTTIM_INT                   56
+#define BTWUI_INT                   57
+#define TIM2_INT                    58
+#define TIM1_INT                    59
+#define DMA_ERR                     60
+#define DMA_INT                     61
+#define GPIO_INT_PORTD              62
+
+#define IMX_IRQS                         (64)
+
+/* note: the IMX has four gpio ports (A-D), but only
+ *       the following pins are connected to the outside
+ *       world:
+ *
+ * PORT A: bits 0-31
+ * PORT B: bits 8-31
+ * PORT C: bits 3-17
+ * PORT D: bits 6-31
+ *
+ * We map these interrupts straight on. As a result we have
+ * several holes in the interrupt mapping. We do this for two
+ * reasons:
+ *   - mapping the interrupts without holes would get
+ *     far more complicated
+ *   - Motorola could well decide to bring some processor
+ *     with more pins connected
+ */
+
+#define IRQ_GPIOA(x)  (IMX_IRQS + x)
+#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
+
+#define NR_IRQS (IRQ_GPIOD(32) + 1)
+#define IRQ_GPIO(x)
+#endif