7 files changed, 33 insertions, 3 deletions

diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h
index a5a86b1ff886..4d51177efddd 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200.h
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200.h
@@ -80,6 +80,22 @@
 
 
 /*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)    /* Advanced Interrupt Controller */
+#define AT91_DBGU       (0xfffff200 - AT91_BASE_SYS)    /* Debug Unit */
+#define AT91_PIOA       (0xfffff400 - AT91_BASE_SYS)    /* PIO Controller A */
+#define AT91_PIOB       (0xfffff600 - AT91_BASE_SYS)    /* PIO Controller B */
+#define AT91_PIOC       (0xfffff800 - AT91_BASE_SYS)    /* PIO Controller C */
+#define AT91_PIOD       (0xfffffa00 - AT91_BASE_SYS)    /* PIO Controller D */
+#define AT91_PMC        (0xfffffc00 - AT91_BASE_SYS)    /* Power Management Controller */
+#define AT91_ST         (0xfffffd00 - AT91_BASE_SYS)    /* System Timer */
+#define AT91_RTC        (0xfffffe00 - AT91_BASE_SYS)    /* Real-Time Clock */
+#define AT91_MC         (0xffffff00 - AT91_BASE_SYS)    /* Memory Controllers */
+
+#define AT91_MATRIX     0       /* not supported */
+
+/*
  * Internal Memory.
  */
 #define AT91RM9200_ROM_BASE     0x00100000      /* Internal ROM base address */
diff --git a/include/asm-arm/arch-at91rm9200/debug-macro.S b/include/asm-arm/arch-at91rm9200/debug-macro.S
index f496b54c4c3e..85cdadf26634 100644
--- a/include/asm-arm/arch-at91rm9200/debug-macro.S
+++ b/include/asm-arm/arch-at91rm9200/debug-macro.S
@@ -12,6 +12,7 @@
 */
 
 #include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
 
         .macro  addruart,rx
         mrc     p15, 0, \rx, c1, c0
diff --git a/include/asm-arm/arch-at91rm9200/entry-macro.S b/include/asm-arm/arch-at91rm9200/entry-macro.S
index 61a326e94909..57248a796472 100644
--- a/include/asm-arm/arch-at91rm9200/entry-macro.S
+++ b/include/asm-arm/arch-at91rm9200/entry-macro.S
@@ -11,6 +11,7 @@
  */
 
 #include <asm/hardware.h>
+#include <asm/arch/at91_aic.h>
 
         .macro  disable_fiq
         .endm
diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h
index 9ca4cc9c0b2e..d42e310584a9 100644
--- a/include/asm-arm/arch-at91rm9200/hardware.h
+++ b/include/asm-arm/arch-at91rm9200/hardware.h
@@ -16,8 +16,16 @@
 
 #include <asm/sizes.h>
 
+#if defined(CONFIG_ARCH_AT91RM9200)
 #include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91rm9200_sys.h>
+#elif defined(CONFIG_ARCH_AT91SAM9260)
+#include <asm/arch/at91sam9260.h>
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+#include <asm/arch/at91sam9261.h>
+#else
+#error "Unsupported AT91 processor"
+#endif
+
 
 /*
  * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h
index 763cb96c418b..c0679eaefaf2 100644
--- a/include/asm-arm/arch-at91rm9200/irqs.h
+++ b/include/asm-arm/arch-at91rm9200/irqs.h
@@ -21,6 +21,8 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
+#include <asm/arch/at91_aic.h>
+
 #define NR_AIC_IRQS 32
 
 
diff --git a/include/asm-arm/arch-at91rm9200/system.h b/include/asm-arm/arch-at91rm9200/system.h
index 92f36769b2a5..053f2e09c1fc 100644
--- a/include/asm-arm/arch-at91rm9200/system.h
+++ b/include/asm-arm/arch-at91rm9200/system.h
@@ -22,6 +22,8 @@
 #define __ASM_ARCH_SYSTEM_H
 
 #include <asm/hardware.h>
+#include <asm/arch/at91_st.h>
+#include <asm/arch/at91_dbgu.h>
 
 static inline void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-at91rm9200/uncompress.h b/include/asm-arm/arch-at91rm9200/uncompress.h
index ec7811ab0a52..34b4b93fa015 100644
--- a/include/asm-arm/arch-at91rm9200/uncompress.h
+++ b/include/asm-arm/arch-at91rm9200/uncompress.h
@@ -22,11 +22,11 @@
 #define __ASM_ARCH_UNCOMPRESS_H
 
 #include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
 
 /*
  * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
+ * initialized by the bootloader.  If you didn't setup a port in
  * your bootloader then nothing will appear (which might be desired).
  *
  * This does not append a newline