1 files changed, 2 insertions, 331 deletions

diff --git a/fs/Kconfig b/fs/Kconfig
index d0a1174fb516..4eca61c201f0 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1168,195 +1168,7 @@ config EFS_FS
           To compile the EFS file system support as a module, choose M here: the
           module will be called efs.
 
-config JFFS2_FS
-        tristate "Journalling Flash File System v2 (JFFS2) support"
-        select CRC32
-        depends on MTD
-        help
-          JFFS2 is the second generation of the Journalling Flash File System
-          for use on diskless embedded devices. It provides improved wear
-          levelling, compression and support for hard links. You cannot use
-          this on normal block devices, only on 'MTD' devices.
-
-          Further information on the design and implementation of JFFS2 is
-          available at <http://sources.redhat.com/jffs2/>.
-
-config JFFS2_FS_DEBUG
-        int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
-        depends on JFFS2_FS
-        default "0"
-        help
-          This controls the amount of debugging messages produced by the JFFS2
-          code. Set it to zero for use in production systems. For evaluation,
-          testing and debugging, it's advisable to set it to one. This will
-          enable a few assertions and will print debugging messages at the
-          KERN_DEBUG loglevel, where they won't normally be visible. Level 2
-          is unlikely to be useful - it enables extra debugging in certain
-          areas which at one point needed debugging, but when the bugs were
-          located and fixed, the detailed messages were relegated to level 2.
-
-          If reporting bugs, please try to have available a full dump of the
-          messages at debug level 1 while the misbehaviour was occurring.
-
-config JFFS2_FS_WRITEBUFFER
-        bool "JFFS2 write-buffering support"
-        depends on JFFS2_FS
-        default y
-        help
-          This enables the write-buffering support in JFFS2.
-
-          This functionality is required to support JFFS2 on the following
-          types of flash devices:
-            - NAND flash
-            - NOR flash with transparent ECC
-            - DataFlash
-
-config JFFS2_FS_WBUF_VERIFY
-        bool "Verify JFFS2 write-buffer reads"
-        depends on JFFS2_FS_WRITEBUFFER
-        default n
-        help
-          This causes JFFS2 to read back every page written through the
-          write-buffer, and check for errors.
-
-config JFFS2_SUMMARY
-        bool "JFFS2 summary support (EXPERIMENTAL)"
-        depends on JFFS2_FS && EXPERIMENTAL
-        default n
-        help
-          This feature makes it possible to use summary information
-          for faster filesystem mount.
-
-          The summary information can be inserted into a filesystem image
-          by the utility 'sumtool'.
-
-          If unsure, say 'N'.
-
-config JFFS2_FS_XATTR
-        bool "JFFS2 XATTR support (EXPERIMENTAL)"
-        depends on JFFS2_FS && EXPERIMENTAL
-        default n
-        help
-          Extended attributes are name:value pairs associated with inodes by
-          the kernel or by users (see the attr(5) manual page, or visit
-          <http://acl.bestbits.at/> for details).
-
-          If unsure, say N.
-
-config JFFS2_FS_POSIX_ACL
-        bool "JFFS2 POSIX Access Control Lists"
-        depends on JFFS2_FS_XATTR
-        default y
-        select FS_POSIX_ACL
-        help
-          Posix Access Control Lists (ACLs) support permissions for users and
-          groups beyond the owner/group/world scheme.
-
-          To learn more about Access Control Lists, visit the Posix ACLs for
-          Linux website <http://acl.bestbits.at/>.
-
-          If you don't know what Access Control Lists are, say N
-
-config JFFS2_FS_SECURITY
-        bool "JFFS2 Security Labels"
-        depends on JFFS2_FS_XATTR
-        default y
-        help
-          Security labels support alternative access control models
-          implemented by security modules like SELinux.  This option
-          enables an extended attribute handler for file security
-          labels in the jffs2 filesystem.
-
-          If you are not using a security module that requires using
-          extended attributes for file security labels, say N.
-
-config JFFS2_COMPRESSION_OPTIONS
-        bool "Advanced compression options for JFFS2"
-        depends on JFFS2_FS
-        default n
-        help
-          Enabling this option allows you to explicitly choose which
-          compression modules, if any, are enabled in JFFS2. Removing
-          compressors can mean you cannot read existing file systems,
-          and enabling experimental compressors can mean that you
-          write a file system which cannot be read by a standard kernel.
-
-          If unsure, you should _definitely_ say 'N'.
-
-config JFFS2_ZLIB
-        bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
-        select ZLIB_INFLATE
-        select ZLIB_DEFLATE
-        depends on JFFS2_FS
-        default y
-        help
-          Zlib is designed to be a free, general-purpose, legally unencumbered,
-          lossless data-compression library for use on virtually any computer
-          hardware and operating system. See <http://www.gzip.org/zlib/> for
-          further information.
-
-          Say 'Y' if unsure.
-
-config JFFS2_LZO
-        bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS
-        select LZO_COMPRESS
-        select LZO_DECOMPRESS
-        depends on JFFS2_FS
-        default n
-        help
-          minilzo-based compression. Generally works better than Zlib.
-
-          This feature was added in July, 2007. Say 'N' if you need
-          compatibility with older bootloaders or kernels.
-
-config JFFS2_RTIME
-        bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
-        depends on JFFS2_FS
-        default y
-        help
-          Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
-
-config JFFS2_RUBIN
-        bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
-        depends on JFFS2_FS
-        default n
-        help
-          RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
-
-choice
-        prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
-        default JFFS2_CMODE_PRIORITY
-        depends on JFFS2_FS
-        help
-          You can set here the default compression mode of JFFS2 from
-          the available compression modes. Don't touch if unsure.
-
-config JFFS2_CMODE_NONE
-        bool "no compression"
-        help
-          Uses no compression.
-
-config JFFS2_CMODE_PRIORITY
-        bool "priority"
-        help
-          Tries the compressors in a predefined order and chooses the first
-          successful one.
-
-config JFFS2_CMODE_SIZE
-        bool "size (EXPERIMENTAL)"
-        help
-          Tries all compressors and chooses the one which has the smallest
-          result.
-
-config JFFS2_CMODE_FAVOURLZO
-        bool "Favour LZO"
-        help
-          Tries all compressors and chooses the one which has the smallest
-          result but gives some preference to LZO (which has faster
-          decompression) at the expense of size.
-
-endchoice
-
+source "fs/jffs2/Kconfig"
 # UBIFS File system configuration
 source "fs/ubifs/Kconfig"
 
@@ -1913,148 +1725,7 @@ config SMB_NLS_REMOTE
 
           smbmount from samba 2.2.0 or later supports this.
 
-config CIFS
-        tristate "CIFS support (advanced network filesystem, SMBFS successor)"
-        depends on INET
-        select NLS
-        help
-          This is the client VFS module for the Common Internet File System
-          (CIFS) protocol which is the successor to the Server Message Block 
-          (SMB) protocol, the native file sharing mechanism for most early
-          PC operating systems.  The CIFS protocol is fully supported by 
-          file servers such as Windows 2000 (including Windows 2003, NT 4  
-          and Windows XP) as well by Samba (which provides excellent CIFS
-          server support for Linux and many other operating systems). Limited
-          support for OS/2 and Windows ME and similar servers is provided as
-          well.
-
-          The cifs module provides an advanced network file system
-          client for mounting to CIFS compliant servers.  It includes
-          support for DFS (hierarchical name space), secure per-user
-          session establishment via Kerberos or NTLM or NTLMv2,
-          safe distributed caching (oplock), optional packet
-          signing, Unicode and other internationalization improvements.
-          If you need to mount to Samba or Windows from this machine, say Y.
-
-config CIFS_STATS
-        bool "CIFS statistics"
-        depends on CIFS
-        help
-          Enabling this option will cause statistics for each server share
-          mounted by the cifs client to be displayed in /proc/fs/cifs/Stats
-
-config CIFS_STATS2
-        bool "Extended statistics"
-        depends on CIFS_STATS
-        help
-          Enabling this option will allow more detailed statistics on SMB
-          request timing to be displayed in /proc/fs/cifs/DebugData and also
-          allow optional logging of slow responses to dmesg (depending on the
-          value of /proc/fs/cifs/cifsFYI, see fs/cifs/README for more details).
-          These additional statistics may have a minor effect on performance
-          and memory utilization.
-
-          Unless you are a developer or are doing network performance analysis
-          or tuning, say N.
-
-config CIFS_WEAK_PW_HASH
-        bool "Support legacy servers which use weaker LANMAN security"
-        depends on CIFS
-        help
-          Modern CIFS servers including Samba and most Windows versions
-          (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos)
-          security mechanisms. These hash the password more securely
-          than the mechanisms used in the older LANMAN version of the
-          SMB protocol but LANMAN based authentication is needed to
-          establish sessions with some old SMB servers.
-
-          Enabling this option allows the cifs module to mount to older
-          LANMAN based servers such as OS/2 and Windows 95, but such
-          mounts may be less secure than mounts using NTLM or more recent
-          security mechanisms if you are on a public network.  Unless you
-          have a need to access old SMB servers (and are on a private
-          network) you probably want to say N.  Even if this support
-          is enabled in the kernel build, LANMAN authentication will not be
-          used automatically. At runtime LANMAN mounts are disabled but
-          can be set to required (or optional) either in
-          /proc/fs/cifs (see fs/cifs/README for more detail) or via an
-          option on the mount command. This support is disabled by
-          default in order to reduce the possibility of a downgrade
-          attack.
-
-          If unsure, say N.
-
-config CIFS_UPCALL
-          bool "Kerberos/SPNEGO advanced session setup"
-          depends on CIFS && KEYS
-          help
-            Enables an upcall mechanism for CIFS which accesses
-            userspace helper utilities to provide SPNEGO packaged (RFC 4178)
-            Kerberos tickets which are needed to mount to certain secure servers
-            (for which more secure Kerberos authentication is required). If
-            unsure, say N.
-
-config CIFS_XATTR
-        bool "CIFS extended attributes"
-        depends on CIFS
-        help
-          Extended attributes are name:value pairs associated with inodes by
-          the kernel or by users (see the attr(5) manual page, or visit
-          <http://acl.bestbits.at/> for details).  CIFS maps the name of
-          extended attributes beginning with the user namespace prefix
-          to SMB/CIFS EAs. EAs are stored on Windows servers without the
-          user namespace prefix, but their names are seen by Linux cifs clients
-          prefaced by the user namespace prefix. The system namespace
-          (used by some filesystems to store ACLs) is not supported at
-          this time.
-
-          If unsure, say N.
-
-config CIFS_POSIX
-        bool "CIFS POSIX Extensions"
-        depends on CIFS_XATTR
-        help
-          Enabling this option will cause the cifs client to attempt to
-          negotiate a newer dialect with servers, such as Samba 3.0.5
-          or later, that optionally can handle more POSIX like (rather
-          than Windows like) file behavior.  It also enables
-          support for POSIX ACLs (getfacl and setfacl) to servers
-          (such as Samba 3.10 and later) which can negotiate
-          CIFS POSIX ACL support.  If unsure, say N.
-
-config CIFS_DEBUG2
-        bool "Enable additional CIFS debugging routines"
-        depends on CIFS
-        help
-           Enabling this option adds a few more debugging routines
-           to the cifs code which slightly increases the size of
-           the cifs module and can cause additional logging of debug
-           messages in some error paths, slowing performance. This
-           option can be turned off unless you are debugging
-           cifs problems.  If unsure, say N.
-
-config CIFS_EXPERIMENTAL
-          bool "CIFS Experimental Features (EXPERIMENTAL)"
-          depends on CIFS && EXPERIMENTAL
-          help
-            Enables cifs features under testing. These features are
-            experimental and currently include DFS support and directory 
-            change notification ie fcntl(F_DNOTIFY), as well as the upcall
-            mechanism which will be used for Kerberos session negotiation
-            and uid remapping.  Some of these features also may depend on 
-            setting a value of 1 to the pseudo-file /proc/fs/cifs/Experimental
-            (which is disabled by default). See the file fs/cifs/README 
-            for more details.  If unsure, say N.
-
-config CIFS_DFS_UPCALL
-          bool "DFS feature support (EXPERIMENTAL)"
-          depends on CIFS_EXPERIMENTAL
-          depends on KEYS
-          help
-            Enables an upcall mechanism for CIFS which contacts userspace
-            helper utilities to provide server name resolution (host names to
-            IP addresses) which is needed for implicit mounts of DFS junction
-            points. If unsure, say N.
+source "fs/cifs/Kconfig"
 
 config NCP_FS
         tristate "NCP file system support (to mount NetWare volumes)"