81 files changed, 3384 insertions, 1727 deletions

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index fbc24358ada0..4fbcce758b04 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -113,7 +113,7 @@ int atapi_enabled = 1;
 module_param(atapi_enabled, int, 0444);
 MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
 
-int atapi_dmadir = 0;
+static int atapi_dmadir = 0;
 module_param(atapi_dmadir, int, 0444);
 MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)");
 
@@ -6567,6 +6567,8 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
         ata_lpm_enable(host);
 
         rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
+        if (rc == 0)
+                host->dev->power.power_state = mesg;
         return rc;
 }
 
@@ -6585,6 +6587,7 @@ void ata_host_resume(struct ata_host *host)
 {
         ata_host_request_pm(host, PMSG_ON, ATA_EH_SOFTRESET,
                             ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
+        host->dev->power.power_state = PMSG_ON;
 
         /* reenable link pm */
         ata_lpm_disable(host);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 6036dedfe377..aa884f71a12a 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -56,7 +56,6 @@ enum {
 extern unsigned int ata_print_id;
 extern struct workqueue_struct *ata_aux_wq;
 extern int atapi_enabled;
-extern int atapi_dmadir;
 extern int atapi_passthru16;
 extern int libata_fua;
 extern int libata_noacpi;
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index 78b151c4d20f..5c3142b6f1fc 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -110,8 +110,8 @@ static int rtc_has_irq = 1;
 #define hpet_set_rtc_irq_bit(arg)               0
 #define hpet_rtc_timer_init()                   do { } while (0)
 #define hpet_rtc_dropped_irq()                  0
-#define hpet_register_irq_handler(h)            0
-#define hpet_unregister_irq_handler(h)          0
+#define hpet_register_irq_handler(h)            ({ 0; })
+#define hpet_unregister_irq_handler(h)          ({ 0; })
 #ifdef RTC_IRQ
 static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
 {
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index fea2d3ed9cbd..85e2ba7fcfba 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -47,7 +47,7 @@ static LIST_HEAD(notify_list);
 
 static struct cn_dev cdev;
 
-int cn_already_initialized = 0;
+static int cn_already_initialized;
 
 /*
  * msg->seq and msg->ack are used to determine message genealogy.
diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c
index 7e73cbaa4121..46bc197a047f 100644
--- a/drivers/firewire/fw-cdev.c
+++ b/drivers/firewire/fw-cdev.c
@@ -109,15 +109,17 @@ static int fw_device_op_open(struct inode *inode, struct file *file)
         struct client *client;
         unsigned long flags;
 
-        device = fw_device_from_devt(inode->i_rdev);
+        device = fw_device_get_by_devt(inode->i_rdev);
         if (device == NULL)
                 return -ENODEV;
 
         client = kzalloc(sizeof(*client), GFP_KERNEL);
-        if (client == NULL)
+        if (client == NULL) {
+                fw_device_put(device);
                 return -ENOMEM;
+        }
 
-        client->device = fw_device_get(device);
+        client->device = device;
         INIT_LIST_HEAD(&client->event_list);
         INIT_LIST_HEAD(&client->resource_list);
         spin_lock_init(&client->lock);
@@ -644,6 +646,10 @@ static int ioctl_create_iso_context(struct client *client, void *buffer)
         struct fw_cdev_create_iso_context *request = buffer;
         struct fw_iso_context *context;
 
+        /* We only support one context at this time. */
+        if (client->iso_context != NULL)
+                return -EBUSY;
+
         if (request->channel > 63)
                 return -EINVAL;
 
@@ -790,8 +796,9 @@ static int ioctl_start_iso(struct client *client, void *buffer)
 {
         struct fw_cdev_start_iso *request = buffer;
 
-        if (request->handle != 0)
+        if (client->iso_context == NULL || request->handle != 0)
                 return -EINVAL;
+
         if (client->iso_context->type == FW_ISO_CONTEXT_RECEIVE) {
                 if (request->tags == 0 || request->tags > 15)
                         return -EINVAL;
@@ -808,7 +815,7 @@ static int ioctl_stop_iso(struct client *client, void *buffer)
 {
         struct fw_cdev_stop_iso *request = buffer;
 
-        if (request->handle != 0)
+        if (client->iso_context == NULL || request->handle != 0)
                 return -EINVAL;
 
         return fw_iso_context_stop(client->iso_context);
diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c
index de9066e69adf..2ab13e0f3469 100644
--- a/drivers/firewire/fw-device.c
+++ b/drivers/firewire/fw-device.c
@@ -358,12 +358,9 @@ static ssize_t
 guid_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
         struct fw_device *device = fw_device(dev);
-        u64 guid;
 
-        guid = ((u64)device->config_rom[3] << 32) | device->config_rom[4];
-
-        return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
-                        (unsigned long long)guid);
+        return snprintf(buf, PAGE_SIZE, "0x%08x%08x\n",
+                        device->config_rom[3], device->config_rom[4]);
 }
 
 static struct device_attribute fw_device_attributes[] = {
@@ -610,12 +607,14 @@ static DECLARE_RWSEM(idr_rwsem);
 static DEFINE_IDR(fw_device_idr);
 int fw_cdev_major;
 
-struct fw_device *fw_device_from_devt(dev_t devt)
+struct fw_device *fw_device_get_by_devt(dev_t devt)
 {
         struct fw_device *device;
 
         down_read(&idr_rwsem);
         device = idr_find(&fw_device_idr, MINOR(devt));
+        if (device)
+                fw_device_get(device);
         up_read(&idr_rwsem);
 
         return device;
@@ -627,13 +626,14 @@ static void fw_device_shutdown(struct work_struct *work)
                 container_of(work, struct fw_device, work.work);
         int minor = MINOR(device->device.devt);
 
-        down_write(&idr_rwsem);
-        idr_remove(&fw_device_idr, minor);
-        up_write(&idr_rwsem);
-
         fw_device_cdev_remove(device);
         device_for_each_child(&device->device, NULL, shutdown_unit);
         device_unregister(&device->device);
+
+        down_write(&idr_rwsem);
+        idr_remove(&fw_device_idr, minor);
+        up_write(&idr_rwsem);
+        fw_device_put(device);
 }
 
 static struct device_type fw_device_type = {
@@ -682,10 +682,13 @@ static void fw_device_init(struct work_struct *work)
         }
 
         err = -ENOMEM;
+
+        fw_device_get(device);
         down_write(&idr_rwsem);
         if (idr_pre_get(&fw_device_idr, GFP_KERNEL))
                 err = idr_get_new(&fw_device_idr, device, &minor);
         up_write(&idr_rwsem);
+
         if (err < 0)
                 goto error;
 
@@ -717,13 +720,22 @@ static void fw_device_init(struct work_struct *work)
          */
         if (atomic_cmpxchg(&device->state,
                     FW_DEVICE_INITIALIZING,
-                    FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
+                    FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) {
                 fw_device_shutdown(&device->work.work);
-        else
-                fw_notify("created new fw device %s "
-                          "(%d config rom retries, S%d00)\n",
-                          device->device.bus_id, device->config_rom_retries,
-                          1 << device->max_speed);
+        } else {
+                if (device->config_rom_retries)
+                        fw_notify("created device %s: GUID %08x%08x, S%d00, "
+                                  "%d config ROM retries\n",
+                                  device->device.bus_id,
+                                  device->config_rom[3], device->config_rom[4],
+                                  1 << device->max_speed,
+                                  device->config_rom_retries);
+                else
+                        fw_notify("created device %s: GUID %08x%08x, S%d00\n",
+                                  device->device.bus_id,
+                                  device->config_rom[3], device->config_rom[4],
+                                  1 << device->max_speed);
+        }
 
         /*
          * Reschedule the IRM work if we just finished reading the
@@ -741,7 +753,9 @@ static void fw_device_init(struct work_struct *work)
         idr_remove(&fw_device_idr, minor);
         up_write(&idr_rwsem);
  error:
-        put_device(&device->device);
+        fw_device_put(device);          /* fw_device_idr's reference */
+
+        put_device(&device->device);    /* our reference */
 }
 
 static int update_unit(struct device *dev, void *data)
diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h
index 0854fe2bc110..43808c02793e 100644
--- a/drivers/firewire/fw-device.h
+++ b/drivers/firewire/fw-device.h
@@ -77,13 +77,13 @@ fw_device_is_shutdown(struct fw_device *device)
 }
 
 struct fw_device *fw_device_get(struct fw_device *device);
+struct fw_device *fw_device_get_by_devt(dev_t devt);
 void fw_device_put(struct fw_device *device);
 int fw_device_enable_phys_dma(struct fw_device *device);
 
 void fw_device_cdev_update(struct fw_device *device);
 void fw_device_cdev_remove(struct fw_device *device);
 
-struct fw_device *fw_device_from_devt(dev_t devt);
 extern int fw_cdev_major;
 
 struct fw_unit {
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index 19ece9b6d742..5259491580fc 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -28,14 +28,15 @@
  * and many others.
  */
 
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/mod_devicetable.h>
-#include <linux/device.h>
 #include <linux/scatterlist.h>
-#include <linux/dma-mapping.h>
-#include <linux/blkdev.h>
 #include <linux/string.h>
 #include <linux/stringify.h>
 #include <linux/timer.h>
@@ -47,9 +48,9 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 
-#include "fw-transaction.h"
-#include "fw-topology.h"
 #include "fw-device.h"
+#include "fw-topology.h"
+#include "fw-transaction.h"
 
 /*
  * So far only bridges from Oxford Semiconductor are known to support
@@ -82,6 +83,9 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device "
  *   Avoids access beyond actual disk limits on devices with an off-by-one bug.
  *   Don't use this with devices which don't have this bug.
  *
+ * - delay inquiry
+ *   Wait extra SBP2_INQUIRY_DELAY seconds after login before SCSI inquiry.
+ *
  * - override internal blacklist
  *   Instead of adding to the built-in blacklist, use only the workarounds
  *   specified in the module load parameter.
@@ -91,6 +95,8 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device "
 #define SBP2_WORKAROUND_INQUIRY_36      0x2
 #define SBP2_WORKAROUND_MODE_SENSE_8    0x4
 #define SBP2_WORKAROUND_FIX_CAPACITY    0x8
+#define SBP2_WORKAROUND_DELAY_INQUIRY   0x10
+#define SBP2_INQUIRY_DELAY              12
 #define SBP2_WORKAROUND_OVERRIDE        0x100
 
 static int sbp2_param_workarounds;
@@ -100,6 +106,7 @@ MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0"
         ", 36 byte inquiry = "    __stringify(SBP2_WORKAROUND_INQUIRY_36)
         ", skip mode page 8 = "   __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
         ", fix capacity = "       __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
+        ", delay inquiry = "      __stringify(SBP2_WORKAROUND_DELAY_INQUIRY)
         ", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
         ", or a combination)");
 
@@ -132,6 +139,7 @@ struct sbp2_logical_unit {
         int generation;
         int retries;
         struct delayed_work work;
+        bool blocked;
 };
 
 /*
@@ -141,16 +149,18 @@ struct sbp2_logical_unit {
 struct sbp2_target {
         struct kref kref;
         struct fw_unit *unit;
+        const char *bus_id;
+        struct list_head lu_list;
 
         u64 management_agent_address;
         int directory_id;
         int node_id;
         int address_high;
-
-        unsigned workarounds;
-        struct list_head lu_list;
-
+        unsigned int workarounds;
         unsigned int mgt_orb_timeout;
+
+        int dont_block; /* counter for each logical unit */
+        int blocked;    /* ditto */
 };
 
 /*
@@ -160,7 +170,7 @@ struct sbp2_target {
  */
 #define SBP2_MIN_LOGIN_ORB_TIMEOUT      5000U   /* Timeout in ms */
 #define SBP2_MAX_LOGIN_ORB_TIMEOUT      40000U  /* Timeout in ms */
-#define SBP2_ORB_TIMEOUT                2000    /* Timeout in ms */
+#define SBP2_ORB_TIMEOUT                2000U   /* Timeout in ms */
 #define SBP2_ORB_NULL                   0x80000000
 #define SBP2_MAX_SG_ELEMENT_LENGTH      0xf000
 
@@ -297,7 +307,7 @@ struct sbp2_command_orb {
 static const struct {
         u32 firmware_revision;
         u32 model;
-        unsigned workarounds;
+        unsigned int workarounds;
 } sbp2_workarounds_table[] = {
         /* DViCO Momobay CX-1 with TSB42AA9 bridge */ {
                 .firmware_revision      = 0x002800,
@@ -305,6 +315,11 @@ static const struct {
                 .workarounds            = SBP2_WORKAROUND_INQUIRY_36 |
                                           SBP2_WORKAROUND_MODE_SENSE_8,
         },
+        /* DViCO Momobay FX-3A with TSB42AA9A bridge */ {
+                .firmware_revision      = 0x002800,
+                .model                  = 0x000000,
+                .workarounds            = SBP2_WORKAROUND_DELAY_INQUIRY,
+        },
         /* Initio bridges, actually only needed for some older ones */ {
                 .firmware_revision      = 0x000200,
                 .model                  = ~0,
@@ -501,6 +516,9 @@ sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id,
         unsigned int timeout;
         int retval = -ENOMEM;
 
+        if (function == SBP2_LOGOUT_REQUEST && fw_device_is_shutdown(device))
+                return 0;
+
         orb = kzalloc(sizeof(*orb), GFP_ATOMIC);
         if (orb == NULL)
                 return -ENOMEM;
@@ -553,20 +571,20 @@ sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id,
 
         retval = -EIO;
         if (sbp2_cancel_orbs(lu) == 0) {
-                fw_error("orb reply timed out, rcode=0x%02x\n",
-                         orb->base.rcode);
+                fw_error("%s: orb reply timed out, rcode=0x%02x\n",
+                         lu->tgt->bus_id, orb->base.rcode);
                 goto out;
         }
 
         if (orb->base.rcode != RCODE_COMPLETE) {
-                fw_error("management write failed, rcode 0x%02x\n",
-                         orb->base.rcode);
+                fw_error("%s: management write failed, rcode 0x%02x\n",
+                         lu->tgt->bus_id, orb->base.rcode);
                 goto out;
         }
 
         if (STATUS_GET_RESPONSE(orb->status) != 0 ||
             STATUS_GET_SBP_STATUS(orb->status) != 0) {
-                fw_error("error status: %d:%d\n",
+                fw_error("%s: error status: %d:%d\n", lu->tgt->bus_id,
                          STATUS_GET_RESPONSE(orb->status),
                          STATUS_GET_SBP_STATUS(orb->status));
                 goto out;
@@ -590,29 +608,147 @@ sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id,
 
 static void
 complete_agent_reset_write(struct fw_card *card, int rcode,
-                           void *payload, size_t length, void *data)
+                           void *payload, size_t length, void *done)
+{
+        complete(done);
+}
+
+static void sbp2_agent_reset(struct sbp2_logical_unit *lu)
 {
-        struct fw_transaction *t = data;
+        struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+        DECLARE_COMPLETION_ONSTACK(done);
+        struct fw_transaction t;
+        static u32 z;
+
+        fw_send_request(device->card, &t, TCODE_WRITE_QUADLET_REQUEST,
+                        lu->tgt->node_id, lu->generation, device->max_speed,
+                        lu->command_block_agent_address + SBP2_AGENT_RESET,
+                        &z, sizeof(z), complete_agent_reset_write, &done);
+        wait_for_completion(&done);
+}
 
-        kfree(t);
+static void
+complete_agent_reset_write_no_wait(struct fw_card *card, int rcode,
+                                   void *payload, size_t length, void *data)
+{
+        kfree(data);
 }
 
-static int sbp2_agent_reset(struct sbp2_logical_unit *lu)
+static void sbp2_agent_reset_no_wait(struct sbp2_logical_unit *lu)
 {
         struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
         struct fw_transaction *t;
-        static u32 zero;
+        static u32 z;
 
-        t = kzalloc(sizeof(*t), GFP_ATOMIC);
+        t = kmalloc(sizeof(*t), GFP_ATOMIC);
         if (t == NULL)
-                return -ENOMEM;
+                return;
 
         fw_send_request(device->card, t, TCODE_WRITE_QUADLET_REQUEST,
                         lu->tgt->node_id, lu->generation, device->max_speed,
                         lu->command_block_agent_address + SBP2_AGENT_RESET,
-                        &zero, sizeof(zero), complete_agent_reset_write, t);
+                        &z, sizeof(z), complete_agent_reset_write_no_wait, t);
+}
 
-        return 0;
+static void sbp2_set_generation(struct sbp2_logical_unit *lu, int generation)
+{
+        struct fw_card *card = fw_device(lu->tgt->unit->device.parent)->card;
+        unsigned long flags;
+
+        /* serialize with comparisons of lu->generation and card->generation */
+        spin_lock_irqsave(&card->lock, flags);
+        lu->generation = generation;
+        spin_unlock_irqrestore(&card->lock, flags);
+}
+
+static inline void sbp2_allow_block(struct sbp2_logical_unit *lu)
+{
+        /*
+         * We may access dont_block without taking card->lock here:
+         * All callers of sbp2_allow_block() and all callers of sbp2_unblock()
+         * are currently serialized against each other.
+         * And a wrong result in sbp2_conditionally_block()'s access of
+         * dont_block is rather harmless, it simply misses its first chance.
+         */
+        --lu->tgt->dont_block;
+}
+
+/*
+ * Blocks lu->tgt if all of the following conditions are met:
+ *   - Login, INQUIRY, and high-level SCSI setup of all of the target's
+ *     logical units have been finished (indicated by dont_block == 0).
+ *   - lu->generation is stale.
+ *
+ * Note, scsi_block_requests() must be called while holding card->lock,
+ * otherwise it might foil sbp2_[conditionally_]unblock()'s attempt to
+ * unblock the target.
+ */
+static void sbp2_conditionally_block(struct sbp2_logical_unit *lu)
+{
+        struct sbp2_target *tgt = lu->tgt;
+        struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+        struct Scsi_Host *shost =
+                container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+        unsigned long flags;
+
+        spin_lock_irqsave(&card->lock, flags);
+        if (!tgt->dont_block && !lu->blocked &&
+            lu->generation != card->generation) {
+                lu->blocked = true;
+                if (++tgt->blocked == 1) {
+                        scsi_block_requests(shost);
+                        fw_notify("blocked %s\n", lu->tgt->bus_id);
+                }
+        }
+        spin_unlock_irqrestore(&card->lock, flags);
+}
+
+/*
+ * Unblocks lu->tgt as soon as all its logical units can be unblocked.
+ * Note, it is harmless to run scsi_unblock_requests() outside the
+ * card->lock protected section.  On the other hand, running it inside
+ * the section might clash with shost->host_lock.
+ */
+static void sbp2_conditionally_unblock(struct sbp2_logical_unit *lu)
+{
+        struct sbp2_target *tgt = lu->tgt;
+        struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+        struct Scsi_Host *shost =
+                container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+        unsigned long flags;
+        bool unblock = false;
+
+        spin_lock_irqsave(&card->lock, flags);
+        if (lu->blocked && lu->generation == card->generation) {
+                lu->blocked = false;
+                unblock = --tgt->blocked == 0;
+        }
+        spin_unlock_irqrestore(&card->lock, flags);
+
+        if (unblock) {
+                scsi_unblock_requests(shost);
+                fw_notify("unblocked %s\n", lu->tgt->bus_id);
+        }
+}
+
+/*
+ * Prevents future blocking of tgt and unblocks it.
+ * Note, it is harmless to run scsi_unblock_requests() outside the
+ * card->lock protected section.  On the other hand, running it inside
+ * the section might clash with shost->host_lock.
+ */
+static void sbp2_unblock(struct sbp2_target *tgt)
+{
+        struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+        struct Scsi_Host *shost =
+                container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+        unsigned long flags;
+
+        spin_lock_irqsave(&card->lock, flags);
+        ++tgt->dont_block;
+        spin_unlock_irqrestore(&card->lock, flags);
+
+        scsi_unblock_requests(shost);
 }
 
 static void sbp2_release_target(struct kref *kref)
@@ -621,23 +757,24 @@ static void sbp2_release_target(struct kref *kref)
         struct sbp2_logical_unit *lu, *next;
         struct Scsi_Host *shost =
                 container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
-        struct fw_device *device = fw_device(tgt->unit->device.parent);
+
+        /* prevent deadlocks */
+        sbp2_unblock(tgt);
 
         list_for_each_entry_safe(lu, next, &tgt->lu_list, link) {
-                if (lu->sdev)
+                if (lu->sdev) {
                         scsi_remove_device(lu->sdev);
-
-                if (!fw_device_is_shutdown(device))
-                        sbp2_send_management_orb(lu, tgt->node_id,
-                                        lu->generation, SBP2_LOGOUT_REQUEST,
-                                        lu->login_id, NULL);
+                        scsi_device_put(lu->sdev);
+                }
+                sbp2_send_management_orb(lu, tgt->node_id, lu->generation,
+                                SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
 
                 fw_core_remove_address_handler(&lu->address_handler);
                 list_del(&lu->link);
                 kfree(lu);
         }
         scsi_remove_host(shost);
-        fw_notify("released %s\n", tgt->unit->device.bus_id);
+        fw_notify("released %s\n", tgt->bus_id);
 
         put_device(&tgt->unit->device);
         scsi_host_put(shost);
@@ -666,33 +803,43 @@ static void sbp2_login(struct work_struct *work)
 {
         struct sbp2_logical_unit *lu =
                 container_of(work, struct sbp2_logical_unit, work.work);
-        struct Scsi_Host *shost =
-                container_of((void *)lu->tgt, struct Scsi_Host, hostdata[0]);
+        struct sbp2_target *tgt = lu->tgt;
+        struct fw_device *device = fw_device(tgt->unit->device.parent);
+        struct Scsi_Host *shost;
         struct scsi_device *sdev;
         struct scsi_lun eight_bytes_lun;
-        struct fw_unit *unit = lu->tgt->unit;
-        struct fw_device *device = fw_device(unit->device.parent);
         struct sbp2_login_response response;
         int generation, node_id, local_node_id;
 
+        if (fw_device_is_shutdown(device))
+                goto out;
+
         generation    = device->generation;
         smp_rmb();    /* node_id must not be older than generation */
         node_id       = device->node_id;
         local_node_id = device->card->node_id;
 
+        /* If this is a re-login attempt, log out, or we might be rejected. */
+        if (lu->sdev)
+                sbp2_send_management_orb(lu, device->node_id, generation,
+                                SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
+
         if (sbp2_send_management_orb(lu, node_id, generation,
                                 SBP2_LOGIN_REQUEST, lu->lun, &response) < 0) {
-                if (lu->retries++ < 5)
+                if (lu->retries++ < 5) {
                         sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
-                else
-                        fw_error("failed to login to %s LUN %04x\n",
-                                 unit->device.bus_id, lu->lun);
+                } else {
+                        fw_error("%s: failed to login to LUN %04x\n",
+                                 tgt->bus_id, lu->lun);
+                        /* Let any waiting I/O fail from now on. */
+                        sbp2_unblock(lu->tgt);
+                }
                 goto out;
         }
 
-        lu->generation        = generation;
-        lu->tgt->node_id      = node_id;
-        lu->tgt->address_high = local_node_id << 16;
+        tgt->node_id      = node_id;
+        tgt->address_high = local_node_id << 16;
+        sbp2_set_generation(lu, generation);
 
         /* Get command block agent offset and login id. */
         lu->command_block_agent_address =
@@ -700,8 +847,8 @@ static void sbp2_login(struct work_struct *work)
                 response.command_block_agent.low;
         lu->login_id = LOGIN_RESPONSE_GET_LOGIN_ID(response);
 
-        fw_notify("logged in to %s LUN %04x (%d retries)\n",
-                  unit->device.bus_id, lu->lun, lu->retries);
+        fw_notify("%s: logged in to LUN %04x (%d retries)\n",
+                  tgt->bus_id, lu->lun, lu->retries);
 
 #if 0
         /* FIXME: The linux1394 sbp2 does this last step. */
@@ -711,26 +858,62 @@ static void sbp2_login(struct work_struct *work)
         PREPARE_DELAYED_WORK(&lu->work, sbp2_reconnect);
         sbp2_agent_reset(lu);
 
+        /* This was a re-login. */
+        if (lu->sdev) {
+                sbp2_cancel_orbs(lu);
+                sbp2_conditionally_unblock(lu);
+                goto out;
+        }
+
+        if (lu->tgt->workarounds & SBP2_WORKAROUND_DELAY_INQUIRY)
+                ssleep(SBP2_INQUIRY_DELAY);
+
         memset(&eight_bytes_lun, 0, sizeof(eight_bytes_lun));
         eight_bytes_lun.scsi_lun[0] = (lu->lun >> 8) & 0xff;
         eight_bytes_lun.scsi_lun[1] = lu->lun & 0xff;
+        shost = container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
 
         sdev = __scsi_add_device(shost, 0, 0,
                                  scsilun_to_int(&eight_bytes_lun), lu);
-        if (IS_ERR(sdev)) {
-                sbp2_send_management_orb(lu, node_id, generation,
-                                SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
-                /*
-                 * Set this back to sbp2_login so we fall back and
-                 * retry login on bus reset.
-                 */
-                PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
-        } else {
-                lu->sdev = sdev;
+        /*
+         * FIXME:  We are unable to perform reconnects while in sbp2_login().
+         * Therefore __scsi_add_device() will get into trouble if a bus reset
+         * happens in parallel.  It will either fail or leave us with an
+         * unusable sdev.  As a workaround we check for this and retry the
+         * whole login and SCSI probing.
+         */
+
+        /* Reported error during __scsi_add_device() */
+        if (IS_ERR(sdev))
+                goto out_logout_login;
+
+        /* Unreported error during __scsi_add_device() */
+        smp_rmb(); /* get current card generation */
+        if (generation != device->card->generation) {
+                scsi_remove_device(sdev);
                 scsi_device_put(sdev);
+                goto out_logout_login;
         }
+
+        /* No error during __scsi_add_device() */
+        lu->sdev = sdev;
+        sbp2_allow_block(lu);
+        goto out;
+
+ out_logout_login:
+        smp_rmb(); /* generation may have changed */
+        generation = device->generation;
+        smp_rmb(); /* node_id must not be older than generation */
+
+        sbp2_send_management_orb(lu, device->node_id, generation,
+                                 SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
+        /*
+         * If a bus reset happened, sbp2_update will have requeued
+         * lu->work already.  Reset the work from reconnect to login.
+         */
+        PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
  out:
-        sbp2_target_put(lu->tgt);
+        sbp2_target_put(tgt);
 }
 
 static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry)
@@ -755,6 +938,8 @@ static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry)
         lu->sdev = NULL;
         lu->lun  = lun_entry & 0xffff;
         lu->retries = 0;
+        lu->blocked = false;
+        ++tgt->dont_block;
         INIT_LIST_HEAD(&lu->orb_list);
         INIT_DELAYED_WORK(&lu->work, sbp2_login);
 
@@ -813,7 +998,7 @@ static int sbp2_scan_unit_dir(struct sbp2_target *tgt, u32 *directory,
                         if (timeout > tgt->mgt_orb_timeout)
                                 fw_notify("%s: config rom contains %ds "
                                           "management ORB timeout, limiting "
-                                          "to %ds\n", tgt->unit->device.bus_id,
+                                          "to %ds\n", tgt->bus_id,
                                           timeout / 1000,
                                           tgt->mgt_orb_timeout / 1000);
                         break;
@@ -836,12 +1021,12 @@ static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model,
                                   u32 firmware_revision)
 {
         int i;
-        unsigned w = sbp2_param_workarounds;
+        unsigned int w = sbp2_param_workarounds;
 
         if (w)
                 fw_notify("Please notify linux1394-devel@lists.sourceforge.net "
                           "if you need the workarounds parameter for %s\n",
-                          tgt->unit->device.bus_id);
+                          tgt->bus_id);
 
         if (w & SBP2_WORKAROUND_OVERRIDE)
                 goto out;
@@ -863,8 +1048,7 @@ static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model,
         if (w)
                 fw_notify("Workarounds for %s: 0x%x "
                           "(firmware_revision 0x%06x, model_id 0x%06x)\n",
-                          tgt->unit->device.bus_id,
-                          w, firmware_revision, model);
+                          tgt->bus_id, w, firmware_revision, model);
         tgt->workarounds = w;
 }
 
@@ -888,6 +1072,7 @@ static int sbp2_probe(struct device *dev)
         tgt->unit = unit;
         kref_init(&tgt->kref);
         INIT_LIST_HEAD(&tgt->lu_list);
+        tgt->bus_id = unit->device.bus_id;
 
         if (fw_device_enable_phys_dma(device) < 0)
                 goto fail_shost_put;
@@ -938,10 +1123,13 @@ static void sbp2_reconnect(struct work_struct *work)
 {
         struct sbp2_logical_unit *lu =
                 container_of(work, struct sbp2_logical_unit, work.work);
-        struct fw_unit *unit = lu->tgt->unit;
-        struct fw_device *device = fw_device(unit->device.parent);
+        struct sbp2_target *tgt = lu->tgt;
+        struct fw_device *device = fw_device(tgt->unit->device.parent);
         int generation, node_id, local_node_id;
 
+        if (fw_device_is_shutdown(device))
+                goto out;
+
         generation    = device->generation;
         smp_rmb();    /* node_id must not be older than generation */
         node_id       = device->node_id;
@@ -950,10 +1138,17 @@ static void sbp2_reconnect(struct work_struct *work)
         if (sbp2_send_management_orb(lu, node_id, generation,
                                      SBP2_RECONNECT_REQUEST,
                                      lu->login_id, NULL) < 0) {
-                if (lu->retries++ >= 5) {
-                        fw_error("failed to reconnect to %s\n",
-                                 unit->device.bus_id);
-                        /* Fall back and try to log in again. */
+                /*
+                 * If reconnect was impossible even though we are in the
+                 * current generation, fall back and try to log in again.
+                 *
+                 * We could check for "Function rejected" status, but
+                 * looking at the bus generation as simpler and more general.
+                 */
+                smp_rmb(); /* get current card generation */
+                if (generation == device->card->generation ||
+                    lu->retries++ >= 5) {
+                        fw_error("%s: failed to reconnect\n", tgt->bus_id);
                         lu->retries = 0;
                         PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
                 }
@@ -961,17 +1156,18 @@ static void sbp2_reconnect(struct work_struct *work)
                 goto out;
         }
 
-        lu->generation        = generation;
-        lu->tgt->node_id      = node_id;
-        lu->tgt->address_high = local_node_id << 16;
+        tgt->node_id      = node_id;
+        tgt->address_high = local_node_id << 16;
+        sbp2_set_generation(lu, generation);
 
-        fw_notify("reconnected to %s LUN %04x (%d retries)\n",
-                  unit->device.bus_id, lu->lun, lu->retries);
+        fw_notify("%s: reconnected to LUN %04x (%d retries)\n",
+                  tgt->bus_id, lu->lun, lu->retries);
 
         sbp2_agent_reset(lu);
         sbp2_cancel_orbs(lu);
+        sbp2_conditionally_unblock(lu);
  out:
-        sbp2_target_put(lu->tgt);
+        sbp2_target_put(tgt);
 }
 
 static void sbp2_update(struct fw_unit *unit)
@@ -986,6 +1182,7 @@ static void sbp2_update(struct fw_unit *unit)
          * Iteration over tgt->lu_list is therefore safe here.
          */
         list_for_each_entry(lu, &tgt->lu_list, link) {
+                sbp2_conditionally_block(lu);
                 lu->retries = 0;
                 sbp2_queue_work(lu, 0);
         }
@@ -1063,7 +1260,7 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
 
         if (status != NULL) {
                 if (STATUS_GET_DEAD(*status))
-                        sbp2_agent_reset(orb->lu);
+                        sbp2_agent_reset_no_wait(orb->lu);
 
                 switch (STATUS_GET_RESPONSE(*status)) {
                 case SBP2_STATUS_REQUEST_COMPLETE:
@@ -1089,6 +1286,7 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
                  * or when sending the write (less likely).
                  */
                 result = DID_BUS_BUSY << 16;
+                sbp2_conditionally_block(orb->lu);
         }
 
         dma_unmap_single(device->card->device, orb->base.request_bus,
@@ -1197,7 +1395,7 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
         struct sbp2_logical_unit *lu = cmd->device->hostdata;
         struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
         struct sbp2_command_orb *orb;
-        unsigned max_payload;
+        unsigned int max_payload;
         int retval = SCSI_MLQUEUE_HOST_BUSY;
 
         /*
@@ -1275,6 +1473,10 @@ static int sbp2_scsi_slave_alloc(struct scsi_device *sdev)
 {
         struct sbp2_logical_unit *lu = sdev->hostdata;
 
+        /* (Re-)Adding logical units via the SCSI stack is not supported. */
+        if (!lu)
+                return -ENOSYS;
+
         sdev->allow_restart = 1;
 
         /*
@@ -1319,7 +1521,7 @@ static int sbp2_scsi_abort(struct scsi_cmnd *cmd)
 {
         struct sbp2_logical_unit *lu = cmd->device->hostdata;
 
-        fw_notify("sbp2_scsi_abort\n");
+        fw_notify("%s: sbp2_scsi_abort\n", lu->tgt->bus_id);
         sbp2_agent_reset(lu);
         sbp2_cancel_orbs(lu);
 
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 310e497b5838..c8d0e8715997 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -670,8 +670,8 @@ static void cdrom_buffer_sectors (ide_drive_t *drive, unsigned long sector,
  * and attempt to recover if there are problems.  Returns  0 if everything's
  * ok; nonzero if the request has been terminated.
  */
-static
-int ide_cd_check_ireason(ide_drive_t *drive, int len, int ireason, int rw)
+static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
+                                int len, int ireason, int rw)
 {
         /*
          * ireason == 0: the drive wants to receive data from us
@@ -701,6 +701,9 @@ int ide_cd_check_ireason(ide_drive_t *drive, int len, int ireason, int rw)
                                 drive->name, __FUNCTION__, ireason);
         }
 
+        if (rq->cmd_type == REQ_TYPE_ATA_PC)
+                rq->cmd_flags |= REQ_FAILED;
+
         cdrom_end_request(drive, 0);
         return -1;
 }
@@ -1071,11 +1074,11 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
         /*
          * check which way to transfer data
          */
-        if (blk_fs_request(rq) || blk_pc_request(rq)) {
-                if (ide_cd_check_ireason(drive, len, ireason, write))
-                        return ide_stopped;
+        if (ide_cd_check_ireason(drive, rq, len, ireason, write))
+                return ide_stopped;
 
-                if (blk_fs_request(rq) && write == 0) {
+        if (blk_fs_request(rq)) {
+                if (write == 0) {
                         int nskip;
 
                         if (ide_cd_check_transfer_size(drive, len)) {
@@ -1101,16 +1104,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
         if (ireason == 0) {
                 write = 1;
                 xferfunc = HWIF(drive)->atapi_output_bytes;
-        } else if (ireason == 2 || (ireason == 1 &&
-                   (blk_fs_request(rq) || blk_pc_request(rq)))) {
+        } else {
                 write = 0;
                 xferfunc = HWIF(drive)->atapi_input_bytes;
-        } else {
-                printk(KERN_ERR "%s: %s: The drive "
-                                "appears confused (ireason = 0x%02x). "
-                                "Trying to recover by ending request.\n",
-                                drive->name, __FUNCTION__, ireason);
-                goto end_request;
         }
 
         /*
@@ -1182,11 +1178,10 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
                         else
                                 rq->data += blen;
                 }
+                if (!write && blk_sense_request(rq))
+                        rq->sense_len += blen;
         }
 
-        if (write && blk_sense_request(rq))
-                rq->sense_len += thislen;
-
         /*
          * pad, if necessary
          */
@@ -1931,6 +1926,7 @@ static const struct cd_list_entry ide_cd_quirks_list[] = {
         { "MATSHITADVD-ROM SR-8186", NULL,   IDE_CD_FLAG_PLAY_AUDIO_OK      },
         { "MATSHITADVD-ROM SR-8176", NULL,   IDE_CD_FLAG_PLAY_AUDIO_OK      },
         { "MATSHITADVD-ROM SR-8174", NULL,   IDE_CD_FLAG_PLAY_AUDIO_OK      },
+        { "Optiarc DVD RW AD-5200A", NULL,   IDE_CD_FLAG_PLAY_AUDIO_OK      },
         { NULL, NULL, 0 }
 };
 
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 8f5bed471050..39501d130256 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -867,7 +867,7 @@ static void idedisk_setup (ide_drive_t *drive)
 
         /* Only print cache size when it was specified */
         if (id->buf_size)
-                printk (" w/%dKiB Cache", id->buf_size/2);
+                printk(KERN_CONT " w/%dKiB Cache", id->buf_size / 2);
 
         printk(KERN_CONT ", CHS=%d/%d/%d\n",
                          drive->bios_cyl, drive->bios_head, drive->bios_sect);
@@ -949,7 +949,8 @@ static void ide_device_shutdown(ide_drive_t *drive)
                 return;
         }
 
-        printk("Shutdown: %s\n", drive->name);
+        printk(KERN_INFO "Shutdown: %s\n", drive->name);
+
         drive->gendev.bus->suspend(&drive->gendev, PMSG_SUSPEND);
 }
 
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index d0e7b537353e..2de99e4be5c9 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -1,9 +1,13 @@
 /*
+ *  IDE DMA support (including IDE PCI BM-DMA).
+ *
  *  Copyright (C) 1995-1998   Mark Lord
  *  Copyright (C) 1999-2000   Andre Hedrick <andre@linux-ide.org>
  *  Copyright (C) 2004, 2007  Bartlomiej Zolnierkiewicz
  *
  *  May be copied or modified under the terms of the GNU General Public License
+ *
+ *  DMA is supported for all IDE devices (disk drives, cdroms, tapes, floppies).
  */
 
 /*
@@ -11,49 +15,6 @@
  */
 
 /*
- * This module provides support for the bus-master IDE DMA functions
- * of various PCI chipsets, including the Intel PIIX (i82371FB for
- * the 430 FX chipset), the PIIX3 (i82371SB for the 430 HX/VX and 
- * 440 chipsets), and the PIIX4 (i82371AB for the 430 TX chipset)
- * ("PIIX" stands for "PCI ISA IDE Xcellerator").
- *
- * Pretty much the same code works for other IDE PCI bus-mastering chipsets.
- *
- * DMA is supported for all IDE devices (disk drives, cdroms, tapes, floppies).
- *
- * By default, DMA support is prepared for use, but is currently enabled only
- * for drives which already have DMA enabled (UltraDMA or mode 2 multi/single),
- * or which are recognized as "good" (see table below).  Drives with only mode0
- * or mode1 (multi/single) DMA should also work with this chipset/driver
- * (eg. MC2112A) but are not enabled by default.
- *
- * Use "hdparm -i" to view modes supported by a given drive.
- *
- * The hdparm-3.5 (or later) utility can be used for manually enabling/disabling
- * DMA support, but must be (re-)compiled against this kernel version or later.
- *
- * To enable DMA, use "hdparm -d1 /dev/hd?" on a per-drive basis after booting.
- * If problems arise, ide.c will disable DMA operation after a few retries.
- * This error recovery mechanism works and has been extremely well exercised.
- *
- * IDE drives, depending on their vintage, may support several different modes
- * of DMA operation.  The boot-time modes are indicated with a "*" in
- * the "hdparm -i" listing, and can be changed with *knowledgeable* use of
- * the "hdparm -X" feature.  There is seldom a need to do this, as drives
- * normally power-up with their "best" PIO/DMA modes enabled.
- *
- * Testing has been done with a rather extensive number of drives,
- * with Quantum & Western Digital models generally outperforming the pack,
- * and Fujitsu & Conner (and some Seagate which are really Conner) drives
- * showing more lackluster throughput.
- *
- * Keep an eye on /var/adm/messages for "DMA disabled" messages.
- *
- * Some people have reported trouble with Intel Zappa motherboards.
- * This can be fixed by upgrading the AMI BIOS to version 1.00.04.BS0,
- * available from ftp://ftp.intel.com/pub/bios/10004bs0.exe
- * (thanks to Glen Morrell <glen@spin.Stanford.edu> for researching this).
- *
  * Thanks to "Christopher J. Reimer" <reimer@doe.carleton.ca> for
  * fixing the problem with the BIOS on some Acer motherboards.
  *
@@ -65,11 +26,6 @@
  *
  * Most importantly, thanks to Robert Bringman <rob@mars.trion.com>
  * for supplying a Promise UDMA board & WD UDMA drive for this work!
- *
- * And, yes, Intel Zappa boards really *do* use both PIIX IDE ports.
- *
- * ATA-66/100 and recovery functions, I forgot the rest......
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 4a2cb2868226..194ecb0049eb 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -756,7 +756,8 @@ static int ide_probe_port(ide_hwif_t *hwif)
 
         BUG_ON(hwif->present);
 
-        if (hwif->noprobe)
+        if (hwif->noprobe ||
+            (hwif->drives[0].noprobe && hwif->drives[1].noprobe))
                 return -EACCES;
 
         /*
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 0598ecfd5f37..43e0e0557776 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -3765,6 +3765,11 @@ static int ide_tape_probe(ide_drive_t *drive)
         g->fops = &idetape_block_ops;
         ide_register_region(g);
 
+        printk(KERN_WARNING "It is possible that this driver does not have any"
+                " users anymore and, as a result, it will be REMOVED soon."
+                " Please notify Bart <bzolnier@gmail.com> or Boris"
+                " <petkovbb@gmail.com> in case you still need it.\n");
+
         return 0;
 
 out_free_tape:
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 477833f0daf5..fa16bc30bbc9 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -590,11 +590,6 @@ void ide_unregister(unsigned int index, int init_default, int restore)
                 hwif->extra_ports = 0;
         }
 
-        /*
-         * Note that we only release the standard ports,
-         * and do not even try to handle any extra ports
-         * allocated for weird IDE interface chipsets.
-         */
         ide_hwif_release_regions(hwif);
 
         /* copy original settings */
@@ -1036,10 +1031,9 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device
                         drive->nice1 = (arg >> IDE_NICE_1) & 1;
                         return 0;
                 case HDIO_DRIVE_RESET:
-                {
-                        unsigned long flags;
-                        if (!capable(CAP_SYS_ADMIN)) return -EACCES;
-                        
+                        if (!capable(CAP_SYS_ADMIN))
+                                return -EACCES;
+
                         /*
                          *      Abort the current command on the
                          *      group if there is one, taking
@@ -1058,17 +1052,15 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device
                         ide_abort(drive, "drive reset");
 
                         BUG_ON(HWGROUP(drive)->handler);
-                                
+
                         /* Ensure nothing gets queued after we
                            drop the lock. Reset will clear the busy */
-                   
+
                         HWGROUP(drive)->busy = 1;
                         spin_unlock_irqrestore(&ide_lock, flags);
                         (void) ide_do_reset(drive);
 
                         return 0;
-                }
-
                 case HDIO_GET_BUSSTATE:
                         if (!capable(CAP_SYS_ADMIN))
                                 return -EACCES;
@@ -1449,7 +1441,7 @@ static int __init ide_setup(char *s)
 
                         case -1: /* "noprobe" */
                                 hwif->noprobe = 1;
-                                goto done;
+                                goto obsolete_option;
 
                         case 1: /* base */
                                 vals[1] = vals[0] + 0x206; /* default ctl */
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index bba29df5f21d..2f4f47ad602f 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -334,43 +334,6 @@ static void __init qd6580_port_init_devs(ide_hwif_t *hwif)
         hwif->drives[1].drive_data = t2;
 }
 
-/*
- * qd_unsetup:
- *
- * called to unsetup an ata channel : back to default values, unlinks tuning
- */
-/*
-static void __exit qd_unsetup(ide_hwif_t *hwif)
-{
-        u8 config = hwif->config_data;
-        int base = hwif->select_data;
-        void *set_pio_mode = (void *)hwif->set_pio_mode;
-
-        if (hwif->chipset != ide_qd65xx)
-                return;
-
-        printk(KERN_NOTICE "%s: back to defaults\n", hwif->name);
-
-        hwif->selectproc = NULL;
-        hwif->set_pio_mode = NULL;
-
-        if (set_pio_mode == (void *)qd6500_set_pio_mode) {
-                // will do it for both
-                outb(QD6500_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
-        } else if (set_pio_mode == (void *)qd6580_set_pio_mode) {
-                if (QD_CONTROL(hwif) & QD_CONTR_SEC_DISABLED) {
-                        outb(QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
-                        outb(QD6580_DEF_DATA2, QD_TIMREG(&hwif->drives[1]));
-                } else {
-                        outb(hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
-                }
-        } else {
-                printk(KERN_WARNING "Unknown qd65xx tuning fonction !\n");
-                printk(KERN_WARNING "keeping settings !\n");
-        }
-}
-*/
-
 static const struct ide_port_info qd65xx_port_info __initdata = {
         .chipset                = ide_qd65xx,
         .host_flags             = IDE_HFLAG_IO_32BIT |
@@ -444,6 +407,8 @@ static int __init qd_probe(int base)
                 printk(KERN_DEBUG "qd6580: config=%#x, control=%#x, ID3=%u\n",
                         config, control, QD_ID3);
 
+                outb(QD_DEF_CONTR, QD_CONTROL_PORT);
+
                 if (control & QD_CONTR_SEC_DISABLED) {
                         /* secondary disabled */
 
@@ -460,8 +425,6 @@ static int __init qd_probe(int base)
 
                         ide_device_add(idx, &qd65xx_port_info);
 
-                        outb(QD_DEF_CONTR, QD_CONTROL_PORT);
-
                         return 1;
                 } else {
                         ide_hwif_t *mate;
@@ -487,8 +450,6 @@ static int __init qd_probe(int base)
 
                         ide_device_add(idx, &qd65xx_port_info);
 
-                        outb(QD_DEF_CONTR, QD_CONTROL_PORT);
-
                         return 0; /* no other qd65xx possible */
                 }
         }
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index bd24dad3cfc6..ec667982809c 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -787,7 +787,8 @@ static int __init cmd640x_init(void)
         /*
          * Try to enable the secondary interface, if not already enabled
          */
-        if (cmd_hwif1->noprobe) {
+        if (cmd_hwif1->noprobe ||
+            (cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe)) {
                 port2 = "not probed";
         } else {
                 b = get_cmd640_reg(CNTRL);
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index d0f7bb8b8adf..6357bb6269ab 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1570,10 +1570,12 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic
                 if (rev < 3)
                         info = &hpt36x;
                 else {
-                        static const struct hpt_info *hpt37x_info[] =
-                                { &hpt370, &hpt370a, &hpt372, &hpt372n };
-
-                        info = hpt37x_info[min_t(u8, rev, 6) - 3];
+                        switch (min_t(u8, rev, 6)) {
+                        case 3: info = &hpt370;  break;
+                        case 4: info = &hpt370a; break;
+                        case 5: info = &hpt372;  break;
+                        case 6: info = &hpt372n; break;
+                        }
                         idx++;
                 }
                 break;
@@ -1626,7 +1628,7 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic
         return ide_setup_pci_device(dev, &d);
 }
 
-static const struct pci_device_id hpt366_pci_tbl[] = {
+static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = {
         { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366),  0 },
         { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372),  1 },
         { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302),  2 },
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 28e155a9e2a5..9e2b1964d71a 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -183,6 +183,9 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device "
  *   Avoids access beyond actual disk limits on devices with an off-by-one bug.
  *   Don't use this with devices which don't have this bug.
  *
+ * - delay inquiry
+ *   Wait extra SBP2_INQUIRY_DELAY seconds after login before SCSI inquiry.
+ *
  * - override internal blacklist
  *   Instead of adding to the built-in blacklist, use only the workarounds
  *   specified in the module load parameter.
@@ -195,6 +198,7 @@ MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0"
         ", 36 byte inquiry = "    __stringify(SBP2_WORKAROUND_INQUIRY_36)
         ", skip mode page 8 = "   __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
         ", fix capacity = "       __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
+        ", delay inquiry = "      __stringify(SBP2_WORKAROUND_DELAY_INQUIRY)
         ", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
         ", or a combination)");
 
@@ -357,6 +361,11 @@ static const struct {
                 .workarounds            = SBP2_WORKAROUND_INQUIRY_36 |
                                           SBP2_WORKAROUND_MODE_SENSE_8,
         },
+        /* DViCO Momobay FX-3A with TSB42AA9A bridge */ {
+                .firmware_revision      = 0x002800,
+                .model_id               = 0x000000,
+                .workarounds            = SBP2_WORKAROUND_DELAY_INQUIRY,
+        },
         /* Initio bridges, actually only needed for some older ones */ {
                 .firmware_revision      = 0x000200,
                 .model_id               = SBP2_ROM_VALUE_WILDCARD,
@@ -914,6 +923,9 @@ static int sbp2_start_device(struct sbp2_lu *lu)
         sbp2_agent_reset(lu, 1);
         sbp2_max_speed_and_size(lu);
 
+        if (lu->workarounds & SBP2_WORKAROUND_DELAY_INQUIRY)
+                ssleep(SBP2_INQUIRY_DELAY);
+
         error = scsi_add_device(lu->shost, 0, lu->ud->id, 0);
         if (error) {
                 SBP2_ERR("scsi_add_device failed");
@@ -1962,6 +1974,9 @@ static int sbp2scsi_slave_alloc(struct scsi_device *sdev)
 {
         struct sbp2_lu *lu = (struct sbp2_lu *)sdev->host->hostdata[0];
 
+        if (sdev->lun != 0 || sdev->id != lu->ud->id || sdev->channel != 0)
+                return -ENODEV;
+
         lu->sdev = sdev;
         sdev->allow_restart = 1;
 
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index d2ecb0d8a1bb..80d8e097b065 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -343,6 +343,8 @@ enum sbp2lu_state_types {
 #define SBP2_WORKAROUND_INQUIRY_36      0x2
 #define SBP2_WORKAROUND_MODE_SENSE_8    0x4
 #define SBP2_WORKAROUND_FIX_CAPACITY    0x8
+#define SBP2_WORKAROUND_DELAY_INQUIRY   0x10
+#define SBP2_INQUIRY_DELAY              12
 #define SBP2_WORKAROUND_OVERRIDE        0x100
 
 #endif /* SBP2_H */
diff --git a/drivers/infiniband/hw/cxgb3/iwch_mem.c b/drivers/infiniband/hw/cxgb3/iwch_mem.c
index 73bfd1656f86..b8797c66676d 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_mem.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_mem.c
@@ -136,14 +136,8 @@ int build_phys_page_list(struct ib_phys_buf *buffer_list,
 
         /* Find largest page shift we can use to cover buffers */
         for (*shift = PAGE_SHIFT; *shift < 27; ++(*shift))
-                if (num_phys_buf > 1) {
-                        if ((1ULL << *shift) & mask)
-                                break;
-                } else
-                        if (1ULL << *shift >=
-                            buffer_list[0].size +
-                            (buffer_list[0].addr & ((1ULL << *shift) - 1)))
-                                break;
+                if ((1ULL << *shift) & mask)
+                        break;
 
         buffer_list[0].size += buffer_list[0].addr & ((1ULL << *shift) - 1);
         buffer_list[0].addr &= ~0ull << *shift;
diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c
index 7f8853b44ee1..b2112f5a422f 100644
--- a/drivers/infiniband/hw/nes/nes.c
+++ b/drivers/infiniband/hw/nes/nes.c
@@ -567,12 +567,12 @@ static int __devinit nes_probe(struct pci_dev *pcidev, const struct pci_device_i
 
         /* Init the adapter */
         nesdev->nesadapter = nes_init_adapter(nesdev, hw_rev);
-        nesdev->nesadapter->et_rx_coalesce_usecs_irq = interrupt_mod_interval;
         if (!nesdev->nesadapter) {
                 printk(KERN_ERR PFX "Unable to initialize adapter.\n");
                 ret = -ENOMEM;
                 goto bail5;
         }
+        nesdev->nesadapter->et_rx_coalesce_usecs_irq = interrupt_mod_interval;
 
         /* nesdev->base_doorbell_index =
                         nesdev->nesadapter->pd_config_base[PCI_FUNC(nesdev->pcidev->devfn)]; */
diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h
index fd57e8a1582f..a48b288618ec 100644
--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -285,6 +285,21 @@ struct nes_device {
 };
 
 
+static inline __le32 get_crc_value(struct nes_v4_quad *nes_quad)
+{
+        u32 crc_value;
+        crc_value = crc32c(~0, (void *)nes_quad, sizeof (struct nes_v4_quad));
+
+        /*
+         * With commit ef19454b ("[LIB] crc32c: Keep intermediate crc
+         * state in cpu order"), behavior of crc32c changes on
+         * big-endian platforms.  Our algorithm expects the previous
+         * behavior; otherwise we have RDMA connection establishment
+         * issue on big-endian.
+         */
+        return cpu_to_le32(crc_value);
+}
+
 static inline void
 set_wqe_64bit_value(__le32 *wqe_words, u32 index, u64 value)
 {
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index bd5cfeaac203..39adb267fb15 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -370,11 +370,11 @@ int schedule_nes_timer(struct nes_cm_node *cm_node, struct sk_buff *skb,
         int ret = 0;
         u32 was_timer_set;
 
+        if (!cm_node)
+                return -EINVAL;
         new_send = kzalloc(sizeof(*new_send), GFP_ATOMIC);
         if (!new_send)
                 return -1;
-        if (!cm_node)
-                return -EINVAL;
 
         /* new_send->timetosend = currenttime */
         new_send->retrycount = NES_DEFAULT_RETRYS;
@@ -947,6 +947,7 @@ static int mini_cm_dec_refcnt_listen(struct nes_cm_core *cm_core,
                 nes_debug(NES_DBG_CM, "destroying listener (%p)\n", listener);
 
                 kfree(listener);
+                listener = NULL;
                 ret = 0;
                 cm_listens_destroyed++;
         } else {
@@ -2319,6 +2320,7 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
         struct iw_cm_event cm_event;
         struct nes_hw_qp_wqe *wqe;
         struct nes_v4_quad nes_quad;
+        u32 crc_value;
         int ret;
 
         ibqp = nes_get_qp(cm_id->device, conn_param->qpn);
@@ -2435,8 +2437,8 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
         nes_quad.TcpPorts[1]   = cm_id->local_addr.sin_port;
 
         /* Produce hash key */
-        nesqp->hte_index = cpu_to_be32(
-                        crc32c(~0, (void *)&nes_quad, sizeof(nes_quad)) ^ 0xffffffff);
+        crc_value = get_crc_value(&nes_quad);
+        nesqp->hte_index = cpu_to_be32(crc_value ^ 0xffffffff);
         nes_debug(NES_DBG_CM, "HTE Index = 0x%08X, CRC = 0x%08X\n",
                         nesqp->hte_index, nesqp->hte_index & adapter->hte_index_mask);
 
@@ -2750,6 +2752,7 @@ void cm_event_connected(struct nes_cm_event *event)
         struct iw_cm_event cm_event;
         struct nes_hw_qp_wqe *wqe;
         struct nes_v4_quad nes_quad;
+        u32 crc_value;
         int ret;
 
         /* get all our handles */
@@ -2827,8 +2830,8 @@ void cm_event_connected(struct nes_cm_event *event)
         nes_quad.TcpPorts[1] = cm_id->local_addr.sin_port;
 
         /* Produce hash key */
-        nesqp->hte_index = cpu_to_be32(
-                        crc32c(~0, (void *)&nes_quad, sizeof(nes_quad)) ^ 0xffffffff);
+        crc_value = get_crc_value(&nes_quad);
+        nesqp->hte_index = cpu_to_be32(crc_value ^ 0xffffffff);
         nes_debug(NES_DBG_CM, "HTE Index = 0x%08X, After CRC = 0x%08X\n",
                         nesqp->hte_index, nesqp->hte_index & nesadapter->hte_index_mask);
 
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 7c4c0fbf0abd..49e53e4c1ebe 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -156,15 +156,14 @@ static void nes_nic_tune_timer(struct nes_device *nesdev)
 
         spin_lock_irqsave(&nesadapter->periodic_timer_lock, flags);
 
-        if (shared_timer->cq_count_old < cq_count) {
-                if (cq_count > shared_timer->threshold_low)
-                        shared_timer->cq_direction_downward=0;
-        }
-        if (shared_timer->cq_count_old >= cq_count)
+        if (shared_timer->cq_count_old <= cq_count)
+                shared_timer->cq_direction_downward = 0;
+        else
                 shared_timer->cq_direction_downward++;
         shared_timer->cq_count_old = cq_count;
         if (shared_timer->cq_direction_downward > NES_NIC_CQ_DOWNWARD_TREND) {
-                if (cq_count <= shared_timer->threshold_low) {
+                if (cq_count <= shared_timer->threshold_low &&
+                    shared_timer->threshold_low > 4) {
                         shared_timer->threshold_low = shared_timer->threshold_low/2;
                         shared_timer->cq_direction_downward=0;
                         nesdev->currcq_count = 0;
@@ -1728,7 +1727,6 @@ int nes_napi_isr(struct nes_device *nesdev)
                         nesdev->int_req &= ~NES_INT_TIMER;
                         nes_write32(nesdev->regs+NES_INTF_INT_MASK, ~(nesdev->intf_int_req));
                         nes_write32(nesdev->regs+NES_INT_MASK, ~nesdev->int_req);
-                        nesadapter->tune_timer.timer_in_use_old = 0;
                 }
                 nesdev->deepcq_count = 0;
                 return 1;
@@ -1867,7 +1865,6 @@ void nes_dpc(unsigned long param)
                                         nesdev->int_req &= ~NES_INT_TIMER;
                                         nes_write32(nesdev->regs + NES_INTF_INT_MASK, ~(nesdev->intf_int_req));
                                         nes_write32(nesdev->regs+NES_INT_MASK, ~nesdev->int_req);
-                                        nesdev->nesadapter->tune_timer.timer_in_use_old = 0;
                                 } else {
                                         nes_write32(nesdev->regs+NES_INT_MASK, 0x0000ffff|(~nesdev->int_req));
                                 }
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index 1e10df550c9e..b7e2844f096b 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -962,7 +962,7 @@ struct nes_arp_entry {
 #define DEFAULT_JUMBO_NES_QL_LOW    12
 #define DEFAULT_JUMBO_NES_QL_TARGET 40
 #define DEFAULT_JUMBO_NES_QL_HIGH   128
-#define NES_NIC_CQ_DOWNWARD_TREND   8
+#define NES_NIC_CQ_DOWNWARD_TREND   16
 
 struct nes_hw_tune_timer {
     //u16 cq_count;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 4dafbe16e82a..a651e9d9f0ef 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -929,7 +929,7 @@ static struct ib_pd *nes_alloc_pd(struct ib_device *ibdev,
                                 NES_MAX_USER_DB_REGIONS, nesucontext->first_free_db);
                 nes_debug(NES_DBG_PD, "find_first_zero_biton doorbells returned %u, mapping pd_id %u.\n",
                                 nespd->mmap_db_index, nespd->pd_id);
-                if (nespd->mmap_db_index > NES_MAX_USER_DB_REGIONS) {
+                if (nespd->mmap_db_index >= NES_MAX_USER_DB_REGIONS) {
                         nes_debug(NES_DBG_PD, "mmap_db_index > MAX\n");
                         nes_free_resource(nesadapter, nesadapter->allocated_pds, pd_num);
                         kfree(nespd);
@@ -1327,7 +1327,7 @@ static struct ib_qp *nes_create_qp(struct ib_pd *ibpd,
                                                                   (long long unsigned int)req.user_wqe_buffers);
                                                         nes_free_resource(nesadapter, nesadapter->allocated_qps, qp_num);
                                                         kfree(nesqp->allocated_buffer);
-                                                        return ERR_PTR(-ENOMEM);
+                                                        return ERR_PTR(-EFAULT);
                                                 }
                                         }
 
@@ -1674,6 +1674,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries,
                 }
                 nes_debug(NES_DBG_CQ, "CQ Virtual Address = %08lX, size = %u.\n",
                                 (unsigned long)req.user_cq_buffer, entries);
+                err = 1;
                 list_for_each_entry(nespbl, &nes_ucontext->cq_reg_mem_list, list) {
                         if (nespbl->user_base == (unsigned long )req.user_cq_buffer) {
                                 list_del(&nespbl->list);
@@ -1686,7 +1687,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries,
                 if (err) {
                         nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
                         kfree(nescq);
-                        return ERR_PTR(err);
+                        return ERR_PTR(-EFAULT);
                 }
 
                 pbl_entries = nespbl->pbl_size >> 3;
@@ -1831,9 +1832,6 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries,
                                 spin_unlock_irqrestore(&nesdev->cqp.lock, flags);
                         }
                 }
-                nes_debug(NES_DBG_CQ, "iWARP CQ%u create timeout expired, major code = 0x%04X,"
-                                " minor code = 0x%04X\n",
-                                nescq->hw_cq.cq_number, cqp_request->major_code, cqp_request->minor_code);
                 if (!context)
                         pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
                                         nescq->hw_cq.cq_pbase);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f337800076c0..a0f0e605d630 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -90,6 +90,11 @@ config MACVLAN
           This allows one to create virtual interfaces that map packets to
           or from specific MAC addresses to a particular interface.
 
+          Macvlan devices can be added using the "ip" command from the
+          iproute2 package starting with the iproute2-2.6.23 release:
+
+          "ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan"
+
           To compile this driver as a module, choose M here: the module
           will be called macvlan.
 
@@ -2363,6 +2368,7 @@ config GELIC_NET
 config GELIC_WIRELESS
        bool "PS3 Wireless support"
        depends on GELIC_NET
+       select WIRELESS_EXT
        help
         This option adds the support for the wireless feature of PS3.
         If you have the wireless-less model of PS3 or have no plan to
diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c
index afc7f34b1dcf..8af142ccf373 100644
--- a/drivers/net/bnx2x.c
+++ b/drivers/net/bnx2x.c
@@ -1,6 +1,6 @@
 /* bnx2x.c: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -10,13 +10,13 @@
  * Based on code from Michael Chan's bnx2 driver
  * UDP CSUM errata workaround by Arik Gendelman
  * Slowpath rework by Vladislav Zolotarov
- * Statistics and Link managment by Yitchak Gertner
+ * Statistics and Link management by Yitchak Gertner
  *
  */
 
 /* define this to make the driver freeze on error
  * to allow getting debug info
- * (you will need to reboot afterwords)
+ * (you will need to reboot afterwards)
  */
 /*#define BNX2X_STOP_ON_ERROR*/
 
@@ -63,22 +63,21 @@
 #include "bnx2x.h"
 #include "bnx2x_init.h"
 
-#define DRV_MODULE_VERSION      "0.40.15"
-#define DRV_MODULE_RELDATE      "$DateTime: 2007/11/15 07:28:37 $"
-#define BNX2X_BC_VER            0x040009
+#define DRV_MODULE_VERSION      "1.40.22"
+#define DRV_MODULE_RELDATE      "2007/11/27"
+#define BNX2X_BC_VER            0x040200
 
 /* Time in jiffies before concluding the transmitter is hung. */
 #define TX_TIMEOUT              (5*HZ)
 
 static char version[] __devinitdata =
-        "Broadcom NetXtreme II 577xx 10Gigabit Ethernet Driver "
+        "Broadcom NetXtreme II 5771X 10Gigabit Ethernet Driver "
         DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
 
 MODULE_AUTHOR("Eliezer Tamir <eliezert@broadcom.com>");
 MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
-MODULE_INFO(cvs_version, "$Revision: #356 $");
 
 static int use_inta;
 static int poll;
@@ -94,8 +93,8 @@ module_param(debug, int, 0);
 MODULE_PARM_DESC(use_inta, "use INT#A instead of MSI-X");
 MODULE_PARM_DESC(poll, "use polling (for debug)");
 MODULE_PARM_DESC(onefunc, "enable only first function");
-MODULE_PARM_DESC(nomcp, "ignore managment CPU (Implies onefunc)");
-MODULE_PARM_DESC(debug, "defualt debug msglevel");
+MODULE_PARM_DESC(nomcp, "ignore management CPU (Implies onefunc)");
+MODULE_PARM_DESC(debug, "default debug msglevel");
 
 #ifdef BNX2X_MULTI
 module_param(use_multi, int, 0);
@@ -298,8 +297,7 @@ static void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
 
 static int bnx2x_mc_assert(struct bnx2x *bp)
 {
-        int i, j;
-        int rc = 0;
+        int i, j, rc = 0;
         char last_idx;
         const char storm[] = {"XTCU"};
         const u32 intmem_base[] = {
@@ -313,8 +311,9 @@ static int bnx2x_mc_assert(struct bnx2x *bp)
         for (i = 0; i < 4; i++) {
                 last_idx = REG_RD8(bp, XSTORM_ASSERT_LIST_INDEX_OFFSET +
                                    intmem_base[i]);
-                BNX2X_ERR("DATA %cSTORM_ASSERT_LIST_INDEX 0x%x\n",
-                          storm[i], last_idx);
+                if (last_idx)
+                        BNX2X_LOG("DATA %cSTORM_ASSERT_LIST_INDEX 0x%x\n",
+                                  storm[i], last_idx);
 
                 /* print the asserts */
                 for (j = 0; j < STROM_ASSERT_ARRAY_SIZE; j++) {
@@ -330,7 +329,7 @@ static int bnx2x_mc_assert(struct bnx2x *bp)
                                       intmem_base[i]);
 
                         if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
-                                BNX2X_ERR("DATA %cSTORM_ASSERT_INDEX 0x%x ="
+                                BNX2X_LOG("DATA %cSTORM_ASSERT_INDEX 0x%x ="
                                           " 0x%08x 0x%08x 0x%08x 0x%08x\n",
                                           storm[i], j, row3, row2, row1, row0);
                                 rc++;
@@ -341,6 +340,7 @@ static int bnx2x_mc_assert(struct bnx2x *bp)
         }
         return rc;
 }
+
 static void bnx2x_fw_dump(struct bnx2x *bp)
 {
         u32 mark, offset;
@@ -348,21 +348,22 @@ static void bnx2x_fw_dump(struct bnx2x *bp)
         int word;
 
         mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104);
-        printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark);
+        mark = ((mark + 0x3) & ~0x3);
+        printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n" KERN_ERR, mark);
 
         for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) {
                 for (word = 0; word < 8; word++)
                         data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
                                                   offset + 4*word));
                 data[8] = 0x0;
-                printk(KERN_ERR PFX "%s", (char *)data);
+                printk(KERN_CONT "%s", (char *)data);
         }
         for (offset = 0xF108; offset <= mark - 0x08000000; offset += 0x8*4) {
                 for (word = 0; word < 8; word++)
                         data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
                                                   offset + 4*word));
                 data[8] = 0x0;
-                printk(KERN_ERR PFX "%s", (char *)data);
+                printk(KERN_CONT "%s", (char *)data);
         }
         printk("\n" KERN_ERR PFX "end of fw dump\n");
 }
@@ -427,10 +428,10 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
                 }
         }
 
-        BNX2X_ERR("def_c_idx(%u)  def_u_idx(%u)  def_t_idx(%u)"
-                  "  def_x_idx(%u)  def_att_idx(%u)  attn_state(%u)"
+        BNX2X_ERR("def_c_idx(%u)  def_u_idx(%u)  def_x_idx(%u)"
+                  "  def_t_idx(%u)  def_att_idx(%u)  attn_state(%u)"
                   "  spq_prod_idx(%u)\n",
-                  bp->def_c_idx, bp->def_u_idx, bp->def_t_idx, bp->def_x_idx,
+                  bp->def_c_idx, bp->def_u_idx, bp->def_x_idx, bp->def_t_idx,
                   bp->def_att_idx, bp->attn_state, bp->spq_prod_idx);
 
 
@@ -441,7 +442,7 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
         DP(BNX2X_MSG_STATS, "stats_state - DISABLE\n");
 }
 
-static void bnx2x_enable_int(struct bnx2x *bp)
+static void bnx2x_int_enable(struct bnx2x *bp)
 {
         int port = bp->port;
         u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
@@ -454,18 +455,26 @@ static void bnx2x_enable_int(struct bnx2x *bp)
                         HC_CONFIG_0_REG_ATTN_BIT_EN_0);
         } else {
                 val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+                        HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
                         HC_CONFIG_0_REG_INT_LINE_EN_0 |
                         HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+
+                /* Errata A0.158 workaround */
+                DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)  MSI-X %d\n",
+                   val, port, addr, msix);
+
+                REG_WR(bp, addr, val);
+
                 val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
         }
 
-        DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)  msi %d\n",
+        DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)  MSI-X %d\n",
            val, port, addr, msix);
 
         REG_WR(bp, addr, val);
 }
 
-static void bnx2x_disable_int(struct bnx2x *bp)
+static void bnx2x_int_disable(struct bnx2x *bp)
 {
         int port = bp->port;
         u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
@@ -484,15 +493,15 @@ static void bnx2x_disable_int(struct bnx2x *bp)
                 BNX2X_ERR("BUG! proper val not read from IGU!\n");
 }
 
-static void bnx2x_disable_int_sync(struct bnx2x *bp)
+static void bnx2x_int_disable_sync(struct bnx2x *bp)
 {
 
         int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
         int i;
 
         atomic_inc(&bp->intr_sem);
-        /* prevent the HW from sending interrupts*/
-        bnx2x_disable_int(bp);
+        /* prevent the HW from sending interrupts */
+        bnx2x_int_disable(bp);
 
         /* make sure all ISRs are done */
         if (msix) {
@@ -775,6 +784,7 @@ static void bnx2x_sp_event(struct bnx2x_fastpath *fp,
                 mb(); /* force bnx2x_wait_ramrod to see the change */
                 return;
         }
+
         switch (command | bp->state) {
         case (RAMROD_CMD_ID_ETH_PORT_SETUP | BNX2X_STATE_OPENING_WAIT4_PORT):
                 DP(NETIF_MSG_IFUP, "got setup ramrod\n");
@@ -787,20 +797,20 @@ static void bnx2x_sp_event(struct bnx2x_fastpath *fp,
                 fp->state = BNX2X_FP_STATE_HALTED;
                 break;
 
-        case (RAMROD_CMD_ID_ETH_PORT_DEL | BNX2X_STATE_CLOSING_WAIT4_DELETE):
-                DP(NETIF_MSG_IFDOWN, "got delete ramrod\n");
-                bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
-                break;
-
         case (RAMROD_CMD_ID_ETH_CFC_DEL | BNX2X_STATE_CLOSING_WAIT4_HALT):
-                DP(NETIF_MSG_IFDOWN, "got delete ramrod for MULTI[%d]\n", cid);
-                bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_DELETED;
+                DP(NETIF_MSG_IFDOWN, "got delete ramrod for MULTI[%d]\n",
+                   cid);
+                bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_CLOSED;
                 break;
 
         case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_OPEN):
                 DP(NETIF_MSG_IFUP, "got set mac ramrod\n");
                 break;
 
+        case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_CLOSING_WAIT4_HALT):
+                DP(NETIF_MSG_IFUP, "got (un)set mac ramrod\n");
+                break;
+
         default:
                 BNX2X_ERR("unexpected ramrod (%d)  state is %x\n",
                           command, bp->state);
@@ -1179,12 +1189,175 @@ static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits)
         return val;
 }
 
+static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
+{
+        u32 cnt;
+        u32 lock_status;
+        u32 resource_bit = (1 << resource);
+        u8 func = bp->port;
+
+        /* Validating that the resource is within range */
+        if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+                DP(NETIF_MSG_HW,
+                   "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
+                   resource, HW_LOCK_MAX_RESOURCE_VALUE);
+                return -EINVAL;
+        }
+
+        /* Validating that the resource is not already taken */
+        lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+        if (lock_status & resource_bit) {
+                DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
+                   lock_status, resource_bit);
+                return -EEXIST;
+        }
+
+        /* Try for 1 second every 5ms */
+        for (cnt = 0; cnt < 200; cnt++) {
+                /* Try to acquire the lock */
+                REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8 + 4,
+                       resource_bit);
+                lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+                if (lock_status & resource_bit)
+                        return 0;
+
+                msleep(5);
+        }
+        DP(NETIF_MSG_HW, "Timeout\n");
+        return -EAGAIN;
+}
+
+static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
+{
+        u32 lock_status;
+        u32 resource_bit = (1 << resource);
+        u8 func = bp->port;
+
+        /* Validating that the resource is within range */
+        if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+                DP(NETIF_MSG_HW,
+                   "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
+                   resource, HW_LOCK_MAX_RESOURCE_VALUE);
+                return -EINVAL;
+        }
+
+        /* Validating that the resource is currently taken */
+        lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+        if (!(lock_status & resource_bit)) {
+                DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
+                   lock_status, resource_bit);
+                return -EFAULT;
+        }
+
+        REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8, resource_bit);
+        return 0;
+}
+
+static int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
+{
+        /* The GPIO should be swapped if swap register is set and active */
+        int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
+                         REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ bp->port;
+        int gpio_shift = gpio_num +
+                        (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
+        u32 gpio_mask = (1 << gpio_shift);
+        u32 gpio_reg;
+
+        if (gpio_num > MISC_REGISTERS_GPIO_3) {
+                BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
+                return -EINVAL;
+        }
+
+        bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+        /* read GPIO and mask except the float bits */
+        gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
+
+        switch (mode) {
+        case MISC_REGISTERS_GPIO_OUTPUT_LOW:
+                DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output low\n",
+                   gpio_num, gpio_shift);
+                /* clear FLOAT and set CLR */
+                gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+                gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
+                break;
+
+        case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
+                DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output high\n",
+                   gpio_num, gpio_shift);
+                /* clear FLOAT and set SET */
+                gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+                gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
+                break;
+
+        case MISC_REGISTERS_GPIO_INPUT_HI_Z :
+                DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n",
+                   gpio_num, gpio_shift);
+                /* set FLOAT */
+                gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+                break;
+
+        default:
+                break;
+        }
+
+        REG_WR(bp, MISC_REG_GPIO, gpio_reg);
+        bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_GPIO);
+
+        return 0;
+}
+
+static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
+{
+        u32 spio_mask = (1 << spio_num);
+        u32 spio_reg;
+
+        if ((spio_num < MISC_REGISTERS_SPIO_4) ||
+            (spio_num > MISC_REGISTERS_SPIO_7)) {
+                BNX2X_ERR("Invalid SPIO %d\n", spio_num);
+                return -EINVAL;
+        }
+
+        bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
+        /* read SPIO and mask except the float bits */
+        spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT);
+
+        switch (mode) {
+        case MISC_REGISTERS_SPIO_OUTPUT_LOW :
+                DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num);
+                /* clear FLOAT and set CLR */
+                spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+                spio_reg |=  (spio_mask << MISC_REGISTERS_SPIO_CLR_POS);
+                break;
+
+        case MISC_REGISTERS_SPIO_OUTPUT_HIGH :
+                DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num);
+                /* clear FLOAT and set SET */
+                spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+                spio_reg |=  (spio_mask << MISC_REGISTERS_SPIO_SET_POS);
+                break;
+
+        case MISC_REGISTERS_SPIO_INPUT_HI_Z:
+                DP(NETIF_MSG_LINK, "Set SPIO %d -> input\n", spio_num);
+                /* set FLOAT */
+                spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+                break;
+
+        default:
+                break;
+        }
+
+        REG_WR(bp, MISC_REG_SPIO, spio_reg);
+        bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_SPIO);
+
+        return 0;
+}
+
 static int bnx2x_mdio22_write(struct bnx2x *bp, u32 reg, u32 val)
 {
-        int rc;
-        u32 tmp, i;
         int port = bp->port;
         u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+        u32 tmp;
+        int i, rc;
 
 /*      DP(NETIF_MSG_HW, "phy_addr 0x%x  reg 0x%x  val 0x%08x\n",
            bp->phy_addr, reg, val); */
@@ -1236,8 +1409,8 @@ static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val)
 {
         int port = bp->port;
         u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-        u32 val, i;
-        int rc;
+        u32 val;
+        int i, rc;
 
         if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
 
@@ -1286,58 +1459,54 @@ static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val)
         return rc;
 }
 
-static int bnx2x_mdio45_write(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
+static int bnx2x_mdio45_ctrl_write(struct bnx2x *bp, u32 mdio_ctrl,
+                                   u32 phy_addr, u32 reg, u32 addr, u32 val)
 {
-        int rc = 0;
-        u32 tmp, i;
-        int port = bp->port;
-        u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-
-        if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
-                tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-                tmp &= ~EMAC_MDIO_MODE_AUTO_POLL;
-                EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
-                REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-                udelay(40);
-        }
+        u32 tmp;
+        int i, rc = 0;
 
-        /* set clause 45 mode */
-        tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-        tmp |= EMAC_MDIO_MODE_CLAUSE_45;
-        EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
+        /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
+         * (a value of 49==0x31) and make sure that the AUTO poll is off
+         */
+        tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+        tmp &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
+        tmp |= (EMAC_MDIO_MODE_CLAUSE_45 |
+                (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
+        REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
+        REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+        udelay(40);
 
         /* address */
-        tmp = ((bp->phy_addr << 21) | (reg << 16) | addr |
+        tmp = ((phy_addr << 21) | (reg << 16) | addr |
                EMAC_MDIO_COMM_COMMAND_ADDRESS |
                EMAC_MDIO_COMM_START_BUSY);
-        EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp);
+        REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
 
         for (i = 0; i < 50; i++) {
                 udelay(10);
 
-                tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+                tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
                 if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
                         udelay(5);
                         break;
                 }
         }
-
         if (tmp & EMAC_MDIO_COMM_START_BUSY) {
                 BNX2X_ERR("write phy register failed\n");
 
                 rc = -EBUSY;
+
         } else {
                 /* data */
-                tmp = ((bp->phy_addr << 21) | (reg << 16) | val |
+                tmp = ((phy_addr << 21) | (reg << 16) | val |
                        EMAC_MDIO_COMM_COMMAND_WRITE_45 |
                        EMAC_MDIO_COMM_START_BUSY);
-                EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp);
+                REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
 
                 for (i = 0; i < 50; i++) {
                         udelay(10);
 
-                        tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+                        tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
                         if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
                                 udelay(5);
                                 break;
@@ -1351,75 +1520,78 @@ static int bnx2x_mdio45_write(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
                 }
         }
 
-        /* unset clause 45 mode */
-        tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-        tmp &= ~EMAC_MDIO_MODE_CLAUSE_45;
-        EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
-
-        if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
-                tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
+        /* unset clause 45 mode, set the MDIO clock to a faster value
+         * (0x13 => 6.25Mhz) and restore the AUTO poll if needed
+         */
+        tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+        tmp &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT);
+        tmp |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT);
+        if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG)
                 tmp |= EMAC_MDIO_MODE_AUTO_POLL;
-                EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
-        }
+        REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
 
         return rc;
 }
 
-static int bnx2x_mdio45_read(struct bnx2x *bp, u32 reg, u32 addr,
-                             u32 *ret_val)
+static int bnx2x_mdio45_write(struct bnx2x *bp, u32 phy_addr, u32 reg,
+                              u32 addr, u32 val)
 {
-        int port = bp->port;
-        u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-        u32 val, i;
-        int rc = 0;
+        u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
 
-        if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
+        return bnx2x_mdio45_ctrl_write(bp, emac_base, phy_addr,
+                                       reg, addr, val);
+}
 
-                val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-                val &= ~EMAC_MDIO_MODE_AUTO_POLL;
-                EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
-                REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-                udelay(40);
-        }
+static int bnx2x_mdio45_ctrl_read(struct bnx2x *bp, u32 mdio_ctrl,
+                                  u32 phy_addr, u32 reg, u32 addr,
+                                  u32 *ret_val)
+{
+        u32 val;
+        int i, rc = 0;
 
-        /* set clause 45 mode */
-        val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-        val |= EMAC_MDIO_MODE_CLAUSE_45;
-        EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
+        /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
+         * (a value of 49==0x31) and make sure that the AUTO poll is off
+         */
+        val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+        val &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
+        val |= (EMAC_MDIO_MODE_CLAUSE_45 |
+                (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
+        REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
+        REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+        udelay(40);
 
         /* address */
-        val = ((bp->phy_addr << 21) | (reg << 16) | addr |
+        val = ((phy_addr << 21) | (reg << 16) | addr |
                EMAC_MDIO_COMM_COMMAND_ADDRESS |
                EMAC_MDIO_COMM_START_BUSY);
-        EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val);
+        REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
 
         for (i = 0; i < 50; i++) {
                 udelay(10);
 
-                val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+                val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
                 if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
                         udelay(5);
                         break;
                 }
         }
-
         if (val & EMAC_MDIO_COMM_START_BUSY) {
                 BNX2X_ERR("read phy register failed\n");
 
                 *ret_val = 0;
                 rc = -EBUSY;
+
         } else {
                 /* data */
-                val = ((bp->phy_addr << 21) | (reg << 16) |
+                val = ((phy_addr << 21) | (reg << 16) |
                        EMAC_MDIO_COMM_COMMAND_READ_45 |
                        EMAC_MDIO_COMM_START_BUSY);
-                EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val);
+                REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
 
                 for (i = 0; i < 50; i++) {
                         udelay(10);
 
-                        val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+                        val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
                         if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
                                 val &= EMAC_MDIO_COMM_DATA;
                                 break;
@@ -1436,31 +1608,39 @@ static int bnx2x_mdio45_read(struct bnx2x *bp, u32 reg, u32 addr,
                 *ret_val = val;
         }
 
-        /* unset clause 45 mode */
-        val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-        val &= ~EMAC_MDIO_MODE_CLAUSE_45;
-        EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
-
-        if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
-                val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
+        /* unset clause 45 mode, set the MDIO clock to a faster value
+         * (0x13 => 6.25Mhz) and restore the AUTO poll if needed
+         */
+        val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+        val &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT);
+        val |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT);
+        if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG)
                 val |= EMAC_MDIO_MODE_AUTO_POLL;
-                EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
-        }
+        REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
 
         return rc;
 }
 
-static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
+static int bnx2x_mdio45_read(struct bnx2x *bp, u32 phy_addr, u32 reg,
+                             u32 addr, u32 *ret_val)
+{
+        u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+
+        return bnx2x_mdio45_ctrl_read(bp, emac_base, phy_addr,
+                                      reg, addr, ret_val);
+}
+
+static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 phy_addr, u32 reg,
+                               u32 addr, u32 val)
 {
         int i;
         u32 rd_val;
 
         might_sleep();
         for (i = 0; i < 10; i++) {
-                bnx2x_mdio45_write(bp, reg, addr, val);
+                bnx2x_mdio45_write(bp, phy_addr, reg, addr, val);
                 msleep(5);
-                bnx2x_mdio45_read(bp, reg, addr, &rd_val);
+                bnx2x_mdio45_read(bp, phy_addr, reg, addr, &rd_val);
                 /* if the read value is not the same as the value we wrote,
                    we should write it again */
                 if (rd_val == val)
@@ -1471,18 +1651,81 @@ static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
 }
 
 /*
- * link managment
+ * link management
  */
 
+static void bnx2x_pause_resolve(struct bnx2x *bp, u32 pause_result)
+{
+        switch (pause_result) {                 /* ASYM P ASYM P */
+        case 0xb:                               /*   1  0   1  1 */
+                bp->flow_ctrl = FLOW_CTRL_TX;
+                break;
+
+        case 0xe:                               /*   1  1   1  0 */
+                bp->flow_ctrl = FLOW_CTRL_RX;
+                break;
+
+        case 0x5:                               /*   0  1   0  1 */
+        case 0x7:                               /*   0  1   1  1 */
+        case 0xd:                               /*   1  1   0  1 */
+        case 0xf:                               /*   1  1   1  1 */
+                bp->flow_ctrl = FLOW_CTRL_BOTH;
+                break;
+
+        default:
+                break;
+        }
+}
+
+static u8 bnx2x_ext_phy_resove_fc(struct bnx2x *bp)
+{
+        u32 ext_phy_addr;
+        u32 ld_pause;   /* local */
+        u32 lp_pause;   /* link partner */
+        u32 an_complete; /* AN complete */
+        u32 pause_result;
+        u8 ret = 0;
+
+        ext_phy_addr = ((bp->ext_phy_config &
+                         PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+                                        PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+
+        /* read twice */
+        bnx2x_mdio45_read(bp, ext_phy_addr,
+                          EXT_PHY_KR_AUTO_NEG_DEVAD,
+                          EXT_PHY_KR_STATUS, &an_complete);
+        bnx2x_mdio45_read(bp, ext_phy_addr,
+                          EXT_PHY_KR_AUTO_NEG_DEVAD,
+                          EXT_PHY_KR_STATUS, &an_complete);
+
+        if (an_complete & EXT_PHY_KR_AUTO_NEG_COMPLETE) {
+                ret = 1;
+                bnx2x_mdio45_read(bp, ext_phy_addr,
+                                  EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                  EXT_PHY_KR_AUTO_NEG_ADVERT, &ld_pause);
+                bnx2x_mdio45_read(bp, ext_phy_addr,
+                                  EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                  EXT_PHY_KR_LP_AUTO_NEG, &lp_pause);
+                pause_result = (ld_pause &
+                                EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 8;
+                pause_result |= (lp_pause &
+                                 EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 10;
+                DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
+                   pause_result);
+                bnx2x_pause_resolve(bp, pause_result);
+        }
+        return ret;
+}
+
 static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status)
 {
-        u32 ld_pause;   /* local driver */
-        u32 lp_pause;   /* link partner */
+        u32 ld_pause;   /* local driver */
+        u32 lp_pause;   /* link partner */
         u32 pause_result;
 
         bp->flow_ctrl = 0;
 
-        /* reolve from gp_status in case of AN complete and not sgmii */
+        /* resolve from gp_status in case of AN complete and not sgmii */
         if ((bp->req_autoneg & AUTONEG_FLOW_CTRL) &&
             (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) &&
             (!(bp->phy_flags & PHY_SGMII_FLAG)) &&
@@ -1499,45 +1742,57 @@ static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status)
                 pause_result |= (lp_pause &
                                  MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7;
                 DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result);
+                bnx2x_pause_resolve(bp, pause_result);
+        } else if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) ||
+                   !(bnx2x_ext_phy_resove_fc(bp))) {
+                /* forced speed */
+                if (bp->req_autoneg & AUTONEG_FLOW_CTRL) {
+                        switch (bp->req_flow_ctrl) {
+                        case FLOW_CTRL_AUTO:
+                                if (bp->dev->mtu <= 4500)
+                                        bp->flow_ctrl = FLOW_CTRL_BOTH;
+                                else
+                                        bp->flow_ctrl = FLOW_CTRL_TX;
+                                break;
 
-                switch (pause_result) {                 /* ASYM P ASYM P */
-                case 0xb:                               /*   1  0   1  1 */
-                        bp->flow_ctrl = FLOW_CTRL_TX;
-                        break;
-
-                case 0xe:                               /*   1  1   1  0 */
-                        bp->flow_ctrl = FLOW_CTRL_RX;
-                        break;
+                        case FLOW_CTRL_TX:
+                                bp->flow_ctrl = FLOW_CTRL_TX;
+                                break;
 
-                case 0x5:                               /*   0  1   0  1 */
-                case 0x7:                               /*   0  1   1  1 */
-                case 0xd:                               /*   1  1   0  1 */
-                case 0xf:                               /*   1  1   1  1 */
-                        bp->flow_ctrl = FLOW_CTRL_BOTH;
-                        break;
+                        case FLOW_CTRL_RX:
+                                if (bp->dev->mtu <= 4500)
+                                        bp->flow_ctrl = FLOW_CTRL_RX;
+                                break;
 
-                default:
-                        break;
-                }
+                        case FLOW_CTRL_BOTH:
+                                if (bp->dev->mtu <= 4500)
+                                        bp->flow_ctrl = FLOW_CTRL_BOTH;
+                                else
+                                        bp->flow_ctrl = FLOW_CTRL_TX;
+                                break;
 
-        } else { /* forced mode */
-                switch (bp->req_flow_ctrl) {
-                case FLOW_CTRL_AUTO:
-                        if (bp->dev->mtu <= 4500)
-                                bp->flow_ctrl = FLOW_CTRL_BOTH;
-                        else
-                                bp->flow_ctrl = FLOW_CTRL_TX;
-                        break;
+                        case FLOW_CTRL_NONE:
+                        default:
+                                break;
+                        }
+                } else { /* forced mode */
+                        switch (bp->req_flow_ctrl) {
+                        case FLOW_CTRL_AUTO:
+                                DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while"
+                                                   " req_autoneg 0x%x\n",
+                                   bp->req_flow_ctrl, bp->req_autoneg);
+                                break;
 
-                case FLOW_CTRL_TX:
-                case FLOW_CTRL_RX:
-                case FLOW_CTRL_BOTH:
-                        bp->flow_ctrl = bp->req_flow_ctrl;
-                        break;
+                        case FLOW_CTRL_TX:
+                        case FLOW_CTRL_RX:
+                        case FLOW_CTRL_BOTH:
+                                bp->flow_ctrl = bp->req_flow_ctrl;
+                                break;
 
-                case FLOW_CTRL_NONE:
-                default:
-                        break;
+                        case FLOW_CTRL_NONE:
+                        default:
+                                break;
+                        }
                 }
         }
         DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", bp->flow_ctrl);
@@ -1548,9 +1803,9 @@ static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status)
         bp->link_status = 0;
 
         if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) {
-                DP(NETIF_MSG_LINK, "link up\n");
+                DP(NETIF_MSG_LINK, "phy link up\n");
 
-                bp->link_up = 1;
+                bp->phy_link_up = 1;
                 bp->link_status |= LINK_STATUS_LINK_UP;
 
                 if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS)
@@ -1659,20 +1914,20 @@ static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status)
                        bp->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
 
         } else { /* link_down */
-                DP(NETIF_MSG_LINK, "link down\n");
+                DP(NETIF_MSG_LINK, "phy link down\n");
 
-                bp->link_up = 0;
+                bp->phy_link_up = 0;
 
                 bp->line_speed = 0;
                 bp->duplex = DUPLEX_FULL;
                 bp->flow_ctrl = 0;
         }
 
-        DP(NETIF_MSG_LINK, "gp_status 0x%x  link_up %d\n"
+        DP(NETIF_MSG_LINK, "gp_status 0x%x  phy_link_up %d\n"
            DP_LEVEL "  line_speed %d  duplex %d  flow_ctrl 0x%x"
                     "  link_status 0x%x\n",
-           gp_status, bp->link_up, bp->line_speed, bp->duplex, bp->flow_ctrl,
-           bp->link_status);
+           gp_status, bp->phy_link_up, bp->line_speed, bp->duplex,
+           bp->flow_ctrl, bp->link_status);
 }
 
 static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g)
@@ -1680,40 +1935,40 @@ static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g)
         int port = bp->port;
 
         /* first reset all status
-         * we asume only one line will be change at a time */
+         * we assume only one line will be change at a time */
         bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
-                       (NIG_XGXS0_LINK_STATUS |
-                        NIG_SERDES0_LINK_STATUS |
-                        NIG_STATUS_INTERRUPT_XGXS0_LINK10G));
-        if (bp->link_up) {
+                       (NIG_STATUS_XGXS0_LINK10G |
+                        NIG_STATUS_XGXS0_LINK_STATUS |
+                        NIG_STATUS_SERDES0_LINK_STATUS));
+        if (bp->phy_link_up) {
                 if (is_10g) {
                         /* Disable the 10G link interrupt
                          * by writing 1 to the status register
                          */
-                        DP(NETIF_MSG_LINK, "10G XGXS link up\n");
+                        DP(NETIF_MSG_LINK, "10G XGXS phy link up\n");
                         bnx2x_bits_en(bp,
                                       NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
-                                      NIG_STATUS_INTERRUPT_XGXS0_LINK10G);
+                                      NIG_STATUS_XGXS0_LINK10G);
 
                 } else if (bp->phy_flags & PHY_XGXS_FLAG) {
                         /* Disable the link interrupt
                          * by writing 1 to the relevant lane
                          * in the status register
                          */
-                        DP(NETIF_MSG_LINK, "1G XGXS link up\n");
+                        DP(NETIF_MSG_LINK, "1G XGXS phy link up\n");
                         bnx2x_bits_en(bp,
                                       NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
                                       ((1 << bp->ser_lane) <<
-                                       NIG_XGXS0_LINK_STATUS_SIZE));
+                                       NIG_STATUS_XGXS0_LINK_STATUS_SIZE));
 
                 } else { /* SerDes */
-                        DP(NETIF_MSG_LINK, "SerDes link up\n");
+                        DP(NETIF_MSG_LINK, "SerDes phy link up\n");
                         /* Disable the link interrupt
                          * by writing 1 to the status register
                          */
                         bnx2x_bits_en(bp,
                                       NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
-                                      NIG_SERDES0_LINK_STATUS);
+                                      NIG_STATUS_SERDES0_LINK_STATUS);
                 }
 
         } else { /* link_down */
@@ -1724,91 +1979,182 @@ static int bnx2x_ext_phy_is_link_up(struct bnx2x *bp)
 {
         u32 ext_phy_type;
         u32 ext_phy_addr;
-        u32 local_phy;
-        u32 val = 0;
+        u32 val1 = 0, val2;
         u32 rx_sd, pcs_status;
 
         if (bp->phy_flags & PHY_XGXS_FLAG) {
-                local_phy = bp->phy_addr;
                 ext_phy_addr = ((bp->ext_phy_config &
                                  PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
                                 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-                bp->phy_addr = (u8)ext_phy_addr;
 
                 ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
                 switch (ext_phy_type) {
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
                         DP(NETIF_MSG_LINK, "XGXS Direct\n");
-                        val = 1;
+                        val1 = 1;
                         break;
 
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
                         DP(NETIF_MSG_LINK, "XGXS 8705\n");
-                        bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD,
-                                          EXT_PHY_OPT_LASI_STATUS, &val);
-                        DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val);
-
-                        bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD,
-                                          EXT_PHY_OPT_LASI_STATUS, &val);
-                        DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val);
-
-                        bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_WIS_DEVAD,
+                                          EXT_PHY_OPT_LASI_STATUS, &val1);
+                        DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
+
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_WIS_DEVAD,
+                                          EXT_PHY_OPT_LASI_STATUS, &val1);
+                        DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
+
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
                                           EXT_PHY_OPT_PMD_RX_SD, &rx_sd);
-                        val = (rx_sd & 0x1);
+                        DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd);
+                        val1 = (rx_sd & 0x1);
                         break;
 
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
                         DP(NETIF_MSG_LINK, "XGXS 8706\n");
-                        bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
-                                          EXT_PHY_OPT_LASI_STATUS, &val);
-                        DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val);
-
-                        bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
-                                          EXT_PHY_OPT_LASI_STATUS, &val);
-                        DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val);
-
-                        bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_OPT_LASI_STATUS, &val1);
+                        DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
+
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_OPT_LASI_STATUS, &val1);
+                        DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
+
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
                                           EXT_PHY_OPT_PMD_RX_SD, &rx_sd);
-                        bnx2x_mdio45_read(bp, EXT_PHY_OPT_PCS_DEVAD,
-                                         EXT_PHY_OPT_PCS_STATUS, &pcs_status);
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PCS_DEVAD,
+                                          EXT_PHY_OPT_PCS_STATUS, &pcs_status);
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_AUTO_NEG_DEVAD,
+                                          EXT_PHY_OPT_AN_LINK_STATUS, &val2);
+
                         DP(NETIF_MSG_LINK, "8706 rx_sd 0x%x"
-                           "  pcs_status 0x%x\n", rx_sd, pcs_status);
-                        /* link is up if both bit 0 of pmd_rx and
-                         * bit 0 of pcs_status are set
+                           "  pcs_status 0x%x 1Gbps link_status 0x%x 0x%x\n",
+                           rx_sd, pcs_status, val2, (val2 & (1<<1)));
+                        /* link is up if both bit 0 of pmd_rx_sd and
+                         * bit 0 of pcs_status are set, or if the autoneg bit
+                           1 is set
                          */
-                        val = (rx_sd & pcs_status);
+                        val1 = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1)));
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+                        bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+
+                        /* clear the interrupt LASI status register */
+                        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                               ext_phy_addr,
+                                               EXT_PHY_KR_PCS_DEVAD,
+                                               EXT_PHY_KR_LASI_STATUS, &val2);
+                        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                               ext_phy_addr,
+                                               EXT_PHY_KR_PCS_DEVAD,
+                                               EXT_PHY_KR_LASI_STATUS, &val1);
+                        DP(NETIF_MSG_LINK, "KR LASI status 0x%x->0x%x\n",
+                           val2, val1);
+                        /* Check the LASI */
+                        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                               ext_phy_addr,
+                                               EXT_PHY_KR_PMA_PMD_DEVAD,
+                                               0x9003, &val2);
+                        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                               ext_phy_addr,
+                                               EXT_PHY_KR_PMA_PMD_DEVAD,
+                                               0x9003, &val1);
+                        DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n",
+                           val2, val1);
+                        /* Check the link status */
+                        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                               ext_phy_addr,
+                                               EXT_PHY_KR_PCS_DEVAD,
+                                               EXT_PHY_KR_PCS_STATUS, &val2);
+                        DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2);
+                        /* Check the link status on 1.1.2 */
+                        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                          ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_KR_STATUS, &val2);
+                        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                          ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_KR_STATUS, &val1);
+                        DP(NETIF_MSG_LINK,
+                           "KR PMA status 0x%x->0x%x\n", val2, val1);
+                        val1 = ((val1 & 4) == 4);
+                        /* If 1G was requested assume the link is up */
+                        if (!(bp->req_autoneg & AUTONEG_SPEED) &&
+                            (bp->req_line_speed == SPEED_1000))
+                                val1 = 1;
+                        bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_OPT_LASI_STATUS, &val2);
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_OPT_LASI_STATUS, &val1);
+                        DP(NETIF_MSG_LINK,
+                           "10G-base-T LASI status 0x%x->0x%x\n", val2, val1);
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_KR_STATUS, &val2);
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_KR_STATUS, &val1);
+                        DP(NETIF_MSG_LINK,
+                           "10G-base-T PMA status 0x%x->0x%x\n", val2, val1);
+                        val1 = ((val1 & 4) == 4);
+                        /* if link is up
+                         * print the AN outcome of the SFX7101 PHY
+                         */
+                        if (val1) {
+                                bnx2x_mdio45_read(bp, ext_phy_addr,
+                                                  EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                                  0x21, &val2);
+                                DP(NETIF_MSG_LINK,
+                                   "SFX7101 AN status 0x%x->%s\n", val2,
+                                   (val2 & (1<<14)) ? "Master" : "Slave");
+                        }
                         break;
 
                 default:
                         DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
                            bp->ext_phy_config);
-                        val = 0;
+                        val1 = 0;
                         break;
                 }
-                bp->phy_addr = local_phy;
 
         } else { /* SerDes */
                 ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
                 switch (ext_phy_type) {
                 case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
                         DP(NETIF_MSG_LINK, "SerDes Direct\n");
-                        val = 1;
+                        val1 = 1;
                         break;
 
                 case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
                         DP(NETIF_MSG_LINK, "SerDes 5482\n");
-                        val = 1;
+                        val1 = 1;
                         break;
 
                 default:
                         DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
                            bp->ext_phy_config);
-                        val = 0;
+                        val1 = 0;
                         break;
                 }
         }
 
-        return val;
+        return val1;
 }
 
 static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb)
@@ -1819,7 +2165,7 @@ static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb)
         u32 wb_write[2];
         u32 val;
 
-        DP(NETIF_MSG_LINK, "enableing BigMAC\n");
+        DP(NETIF_MSG_LINK, "enabling BigMAC\n");
         /* reset and unreset the BigMac */
         REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
                (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
@@ -1933,6 +2279,35 @@ static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb)
         bp->stats_state = STATS_STATE_ENABLE;
 }
 
+static void bnx2x_bmac_rx_disable(struct bnx2x *bp)
+{
+        int port = bp->port;
+        u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
+                               NIG_REG_INGRESS_BMAC0_MEM;
+        u32 wb_write[2];
+
+        /* Only if the bmac is out of reset */
+        if (REG_RD(bp, MISC_REG_RESET_REG_2) &
+                        (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)) {
+                /* Clear Rx Enable bit in BMAC_CONTROL register */
+#ifdef BNX2X_DMAE_RD
+                bnx2x_read_dmae(bp, bmac_addr +
+                                BIGMAC_REGISTER_BMAC_CONTROL, 2);
+                wb_write[0] = *bnx2x_sp(bp, wb_data[0]);
+                wb_write[1] = *bnx2x_sp(bp, wb_data[1]);
+#else
+                wb_write[0] = REG_RD(bp,
+                                bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL);
+                wb_write[1] = REG_RD(bp,
+                                bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL + 4);
+#endif
+                wb_write[0] &= ~BMAC_CONTROL_RX_ENABLE;
+                REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
+                            wb_write, 2);
+                msleep(1);
+        }
+}
+
 static void bnx2x_emac_enable(struct bnx2x *bp)
 {
         int port = bp->port;
@@ -1940,7 +2315,7 @@ static void bnx2x_emac_enable(struct bnx2x *bp)
         u32 val;
         int timeout;
 
-        DP(NETIF_MSG_LINK, "enableing EMAC\n");
+        DP(NETIF_MSG_LINK, "enabling EMAC\n");
         /* reset and unreset the emac core */
         REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
                (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
@@ -2033,7 +2408,7 @@ static void bnx2x_emac_enable(struct bnx2x *bp)
                                       EMAC_TX_MODE_EXT_PAUSE_EN);
         }
 
-        /* KEEP_VLAN_TAG, promiscous */
+        /* KEEP_VLAN_TAG, promiscuous */
         val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE);
         val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;
         EMAC_WR(EMAC_REG_EMAC_RX_MODE, val);
@@ -2161,7 +2536,6 @@ static void bnx2x_pbf_update(struct bnx2x *bp)
         u32 count = 1000;
         u32 pause = 0;
 
-
         /* disable port */
         REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1);
 
@@ -2232,7 +2606,7 @@ static void bnx2x_pbf_update(struct bnx2x *bp)
 static void bnx2x_update_mng(struct bnx2x *bp)
 {
         if (!nomcp)
-                SHMEM_WR(bp, drv_fw_mb[bp->port].link_status,
+                SHMEM_WR(bp, port_mb[bp->port].link_status,
                          bp->link_status);
 }
 
@@ -2294,19 +2668,19 @@ static void bnx2x_link_down(struct bnx2x *bp)
                 DP(BNX2X_MSG_STATS, "stats_state - STOP\n");
         }
 
-        /* indicate link down */
+        /* indicate no mac active */
         bp->phy_flags &= ~(PHY_BMAC_FLAG | PHY_EMAC_FLAG);
 
-        /* reset BigMac */
-        REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
-               (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+        /* update shared memory */
+        bnx2x_update_mng(bp);
 
-        /* ignore drain flag interrupt */
         /* activate nig drain */
         NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
 
-        /* update shared memory */
-        bnx2x_update_mng(bp);
+        /* reset BigMac */
+        bnx2x_bmac_rx_disable(bp);
+        REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+               (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
 
         /* indicate link down */
         bnx2x_link_report(bp);
@@ -2317,14 +2691,15 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp);
 /* This function is called upon link interrupt */
 static void bnx2x_link_update(struct bnx2x *bp)
 {
-        u32 gp_status;
         int port = bp->port;
         int i;
+        u32 gp_status;
         int link_10g;
 
-        DP(NETIF_MSG_LINK, "port %x, is xgxs %x, stat_mask 0x%x,"
+        DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x,"
            " int_mask 0x%x, saved_mask 0x%x, MI_INT %x, SERDES_LINK %x,"
-           " 10G %x, XGXS_LINK %x\n", port, (bp->phy_flags & PHY_XGXS_FLAG),
+           " 10G %x, XGXS_LINK %x\n", port,
+           (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
            REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4),
            REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), bp->nig_mask,
            REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
@@ -2336,7 +2711,7 @@ static void bnx2x_link_update(struct bnx2x *bp)
         might_sleep();
         MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_GP_STATUS);
         /* avoid fast toggling */
-        for (i = 0 ; i < 10 ; i++) {
+        for (i = 0; i < 10; i++) {
                 msleep(10);
                 bnx2x_mdio22_read(bp, MDIO_GP_STATUS_TOP_AN_STATUS1,
                                   &gp_status);
@@ -2351,7 +2726,8 @@ static void bnx2x_link_update(struct bnx2x *bp)
         bnx2x_link_int_ack(bp, link_10g);
 
         /* link is up only if both local phy and external phy are up */
-        if (bp->link_up && bnx2x_ext_phy_is_link_up(bp)) {
+        bp->link_up = (bp->phy_link_up && bnx2x_ext_phy_is_link_up(bp));
+        if (bp->link_up) {
                 if (link_10g) {
                         bnx2x_bmac_enable(bp, 0);
                         bnx2x_leds_set(bp, SPEED_10000);
@@ -2427,7 +2803,9 @@ static void bnx2x_reset_unicore(struct bnx2x *bp)
                 }
         }
 
-        BNX2X_ERR("BUG! unicore is still in reset!\n");
+        BNX2X_ERR("BUG! %s (0x%x) is still in reset!\n",
+                  (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
+                  bp->phy_addr);
 }
 
 static void bnx2x_set_swap_lanes(struct bnx2x *bp)
@@ -2475,12 +2853,12 @@ static void bnx2x_set_parallel_detection(struct bnx2x *bp)
                 MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_10G_PARALLEL_DETECT);
 
                 bnx2x_mdio22_write(bp,
-                                   MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
+                                MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
                                MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT);
 
                 bnx2x_mdio22_read(bp,
-                                 MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
-                                  &control2);
+                                MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
+                                &control2);
 
                 if (bp->autoneg & AUTONEG_PARALLEL) {
                         control2 |=
@@ -2490,8 +2868,14 @@ static void bnx2x_set_parallel_detection(struct bnx2x *bp)
                    ~MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN;
                 }
                 bnx2x_mdio22_write(bp,
-                                 MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
-                                   control2);
+                                MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
+                                control2);
+
+                /* Disable parallel detection of HiG */
+                MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2);
+                bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_UNICORE_MODE_10G,
+                                MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS |
+                                MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS);
         }
 }
 
@@ -2625,7 +3009,7 @@ static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x *bp)
         MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_OVER_1G);
 
         /* set extended capabilities */
-        if (bp->advertising & ADVERTISED_2500baseT_Full)
+        if (bp->advertising & ADVERTISED_2500baseX_Full)
                 val |= MDIO_OVER_1G_UP1_2_5G;
         if (bp->advertising & ADVERTISED_10000baseT_Full)
                 val |= MDIO_OVER_1G_UP1_10G;
@@ -2641,20 +3025,91 @@ static void bnx2x_set_ieee_aneg_advertisment(struct bnx2x *bp)
         /* for AN, we are always publishing full duplex */
         an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
 
-        /* set pause */
-        switch (bp->pause_mode) {
-        case PAUSE_SYMMETRIC:
-                an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
-                break;
-        case PAUSE_ASYMMETRIC:
-                an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
-                break;
-        case PAUSE_BOTH:
-                an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
-                break;
-        case PAUSE_NONE:
-                an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
-                break;
+        /* resolve pause mode and advertisement
+         * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
+        if (bp->req_autoneg & AUTONEG_FLOW_CTRL) {
+                switch (bp->req_flow_ctrl) {
+                case FLOW_CTRL_AUTO:
+                        if (bp->dev->mtu <= 4500) {
+                                an_adv |=
+                                     MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+                                bp->advertising |= (ADVERTISED_Pause |
+                                                    ADVERTISED_Asym_Pause);
+                        } else {
+                                an_adv |=
+                               MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+                                bp->advertising |= ADVERTISED_Asym_Pause;
+                        }
+                        break;
+
+                case FLOW_CTRL_TX:
+                        an_adv |=
+                               MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+                        bp->advertising |= ADVERTISED_Asym_Pause;
+                        break;
+
+                case FLOW_CTRL_RX:
+                        if (bp->dev->mtu <= 4500) {
+                                an_adv |=
+                                     MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+                                bp->advertising |= (ADVERTISED_Pause |
+                                                    ADVERTISED_Asym_Pause);
+                        } else {
+                                an_adv |=
+                                     MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+                                bp->advertising &= ~(ADVERTISED_Pause |
+                                                     ADVERTISED_Asym_Pause);
+                        }
+                        break;
+
+                case FLOW_CTRL_BOTH:
+                        if (bp->dev->mtu <= 4500) {
+                                an_adv |=
+                                     MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+                                bp->advertising |= (ADVERTISED_Pause |
+                                                    ADVERTISED_Asym_Pause);
+                        } else {
+                                an_adv |=
+                               MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+                                bp->advertising |= ADVERTISED_Asym_Pause;
+                        }
+                        break;
+
+                case FLOW_CTRL_NONE:
+                default:
+                        an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+                        bp->advertising &= ~(ADVERTISED_Pause |
+                                             ADVERTISED_Asym_Pause);
+                        break;
+                }
+        } else { /* forced mode */
+                switch (bp->req_flow_ctrl) {
+                case FLOW_CTRL_AUTO:
+                        DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while"
+                                           " req_autoneg 0x%x\n",
+                           bp->req_flow_ctrl, bp->req_autoneg);
+                        break;
+
+                case FLOW_CTRL_TX:
+                        an_adv |=
+                               MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+                        bp->advertising |= ADVERTISED_Asym_Pause;
+                        break;
+
+                case FLOW_CTRL_RX:
+                case FLOW_CTRL_BOTH:
+                        an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+                        bp->advertising |= (ADVERTISED_Pause |
+                                            ADVERTISED_Asym_Pause);
+                        break;
+
+                case FLOW_CTRL_NONE:
+                default:
+                        an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+                        bp->advertising &= ~(ADVERTISED_Pause |
+                                             ADVERTISED_Asym_Pause);
+                        break;
+                }
         }
 
         MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
@@ -2752,47 +3207,162 @@ static void bnx2x_initialize_sgmii_process(struct bnx2x *bp)
 static void bnx2x_link_int_enable(struct bnx2x *bp)
 {
         int port = bp->port;
+        u32 ext_phy_type;
+        u32 mask;
 
         /* setting the status to report on link up
            for either XGXS or SerDes */
         bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
-                       (NIG_XGXS0_LINK_STATUS |
-                        NIG_STATUS_INTERRUPT_XGXS0_LINK10G |
-                        NIG_SERDES0_LINK_STATUS));
+                       (NIG_STATUS_XGXS0_LINK10G |
+                        NIG_STATUS_XGXS0_LINK_STATUS |
+                        NIG_STATUS_SERDES0_LINK_STATUS));
 
         if (bp->phy_flags & PHY_XGXS_FLAG) {
-                /* TBD -
-                 * in force mode (not AN) we can enable just the relevant
-                 * interrupt
-                 * Even in AN we might enable only one according to the AN
-                 * speed mask
-                 */
-                bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
-                              (NIG_MASK_XGXS0_LINK_STATUS |
-                               NIG_MASK_XGXS0_LINK10G));
-                DP(NETIF_MSG_LINK, "enable XGXS interrupt\n");
+                mask = (NIG_MASK_XGXS0_LINK10G |
+                        NIG_MASK_XGXS0_LINK_STATUS);
+                DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n");
+                ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+                if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+                    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
+                    (ext_phy_type !=
+                                PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) {
+                        mask |= NIG_MASK_MI_INT;
+                        DP(NETIF_MSG_LINK, "enabled external phy int\n");
+                }
 
         } else { /* SerDes */
-                bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
-                              NIG_MASK_SERDES0_LINK_STATUS);
-                DP(NETIF_MSG_LINK, "enable SerDes interrupt\n");
+                mask = NIG_MASK_SERDES0_LINK_STATUS;
+                DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n");
+                ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
+                if ((ext_phy_type !=
+                                PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
+                    (ext_phy_type !=
+                                PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN)) {
+                        mask |= NIG_MASK_MI_INT;
+                        DP(NETIF_MSG_LINK, "enabled external phy int\n");
+                }
         }
+        bnx2x_bits_en(bp,
+                      NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+                      mask);
+        DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x,"
+           " int_mask 0x%x, MI_INT %x, SERDES_LINK %x,"
+           " 10G %x, XGXS_LINK %x\n", port,
+           (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
+           REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4),
+           REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
+           REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
+           REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c),
+           REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
+           REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)
+        );
+}
+
+static void bnx2x_bcm8072_external_rom_boot(struct bnx2x *bp)
+{
+        u32 ext_phy_addr = ((bp->ext_phy_config &
+                             PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u32 fw_ver1, fw_ver2;
+
+        /* Need to wait 200ms after reset */
+        msleep(200);
+        /* Boot port from external ROM
+         * Set ser_boot_ctl bit in the MISC_CTRL1 register
+         */
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD,
+                                EXT_PHY_KR_MISC_CTRL1, 0x0001);
+
+        /* Reset internal microprocessor */
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
+                                EXT_PHY_KR_ROM_RESET_INTERNAL_MP);
+        /* set micro reset = 0 */
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
+                                EXT_PHY_KR_ROM_MICRO_RESET);
+        /* Reset internal microprocessor */
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
+                                EXT_PHY_KR_ROM_RESET_INTERNAL_MP);
+        /* wait for 100ms for code download via SPI port */
+        msleep(100);
+
+        /* Clear ser_boot_ctl bit */
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD,
+                                EXT_PHY_KR_MISC_CTRL1, 0x0000);
+        /* Wait 100ms */
+        msleep(100);
+
+        /* Print the PHY FW version */
+        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr,
+                               EXT_PHY_KR_PMA_PMD_DEVAD,
+                               0xca19, &fw_ver1);
+        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr,
+                               EXT_PHY_KR_PMA_PMD_DEVAD,
+                               0xca1a, &fw_ver2);
+        DP(NETIF_MSG_LINK,
+           "8072 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2);
+}
+
+static void bnx2x_bcm8072_force_10G(struct bnx2x *bp)
+{
+        u32 ext_phy_addr = ((bp->ext_phy_config &
+                             PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+
+        /* Force KR or KX */
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL,
+                                0x2040);
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL2,
+                                0x000b);
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_PMD_CTRL,
+                                0x0000);
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_AUTO_NEG_DEVAD, EXT_PHY_KR_CTRL,
+                                0x0000);
 }
 
 static void bnx2x_ext_phy_init(struct bnx2x *bp)
 {
-        int port = bp->port;
         u32 ext_phy_type;
         u32 ext_phy_addr;
-        u32 local_phy;
+        u32 cnt;
+        u32 ctrl;
+        u32 val = 0;
 
         if (bp->phy_flags & PHY_XGXS_FLAG) {
-                local_phy = bp->phy_addr;
                 ext_phy_addr = ((bp->ext_phy_config &
                                  PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
                                 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
 
                 ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+                /* Make sure that the soft reset is off (expect for the 8072:
+                 * due to the lock, it will be done inside the specific
+                 * handling)
+                 */
+                if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+                    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
+                   (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) &&
+                    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072)) {
+                        /* Wait for soft reset to get cleared upto 1 sec */
+                        for (cnt = 0; cnt < 1000; cnt++) {
+                                bnx2x_mdio45_read(bp, ext_phy_addr,
+                                                  EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                                  EXT_PHY_OPT_CNTL, &ctrl);
+                                if (!(ctrl & (1<<15)))
+                                        break;
+                                msleep(1);
+                        }
+                        DP(NETIF_MSG_LINK,
+                           "control reg 0x%x (after %d ms)\n", ctrl, cnt);
+                }
+
                 switch (ext_phy_type) {
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
                         DP(NETIF_MSG_LINK, "XGXS Direct\n");
@@ -2800,49 +3370,235 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp)
 
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
                         DP(NETIF_MSG_LINK, "XGXS 8705\n");
-                        bnx2x_bits_en(bp,
-                                      NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
-                                      NIG_MASK_MI_INT);
-                        DP(NETIF_MSG_LINK, "enabled extenal phy int\n");
 
-                        bp->phy_addr = ext_phy_type;
-                        bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                            EXT_PHY_OPT_PMA_PMD_DEVAD,
                                             EXT_PHY_OPT_PMD_MISC_CNTL,
                                             0x8288);
-                        bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                            EXT_PHY_OPT_PMA_PMD_DEVAD,
                                             EXT_PHY_OPT_PHY_IDENTIFIER,
                                             0x7fbf);
-                        bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                            EXT_PHY_OPT_PMA_PMD_DEVAD,
                                             EXT_PHY_OPT_CMU_PLL_BYPASS,
                                             0x0100);
-                        bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_WIS_DEVAD,
+                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                            EXT_PHY_OPT_WIS_DEVAD,
                                             EXT_PHY_OPT_LASI_CNTL, 0x1);
                         break;
 
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
                         DP(NETIF_MSG_LINK, "XGXS 8706\n");
-                        bnx2x_bits_en(bp,
-                                      NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
-                                      NIG_MASK_MI_INT);
-                        DP(NETIF_MSG_LINK, "enabled extenal phy int\n");
-
-                        bp->phy_addr = ext_phy_type;
-                        bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
-                                            EXT_PHY_OPT_PMD_DIGITAL_CNT,
-                                            0x400);
-                        bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+
+                        if (!(bp->req_autoneg & AUTONEG_SPEED)) {
+                                /* Force speed */
+                                if (bp->req_line_speed == SPEED_10000) {
+                                        DP(NETIF_MSG_LINK,
+                                           "XGXS 8706 force 10Gbps\n");
+                                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                                EXT_PHY_OPT_PMD_DIGITAL_CNT,
+                                                0x400);
+                                } else {
+                                        /* Force 1Gbps */
+                                        DP(NETIF_MSG_LINK,
+                                           "XGXS 8706 force 1Gbps\n");
+
+                                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                                EXT_PHY_OPT_CNTL,
+                                                0x0040);
+
+                                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                                EXT_PHY_OPT_CNTL2,
+                                                0x000D);
+                                }
+
+                                /* Enable LASI */
+                                bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                    EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                                    EXT_PHY_OPT_LASI_CNTL,
+                                                    0x1);
+                        } else {
+                                /* AUTONEG */
+                                /* Allow CL37 through CL73 */
+                                DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");
+                                bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                    EXT_PHY_AUTO_NEG_DEVAD,
+                                                    EXT_PHY_OPT_AN_CL37_CL73,
+                                                    0x040c);
+
+                                /* Enable Full-Duplex advertisment on CL37 */
+                                bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                    EXT_PHY_AUTO_NEG_DEVAD,
+                                                    EXT_PHY_OPT_AN_CL37_FD,
+                                                    0x0020);
+                                /* Enable CL37 AN */
+                                bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                    EXT_PHY_AUTO_NEG_DEVAD,
+                                                    EXT_PHY_OPT_AN_CL37_AN,
+                                                    0x1000);
+                                /* Advertise 10G/1G support */
+                                if (bp->advertising &
+                                    ADVERTISED_1000baseT_Full)
+                                        val = (1<<5);
+                                if (bp->advertising &
+                                    ADVERTISED_10000baseT_Full)
+                                        val |= (1<<7);
+
+                                bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                    EXT_PHY_AUTO_NEG_DEVAD,
+                                                    EXT_PHY_OPT_AN_ADV, val);
+                                /* Enable LASI */
+                                bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                    EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                                    EXT_PHY_OPT_LASI_CNTL,
+                                                    0x1);
+
+                                /* Enable clause 73 AN */
+                                bnx2x_mdio45_write(bp, ext_phy_addr,
+                                                   EXT_PHY_AUTO_NEG_DEVAD,
+                                                   EXT_PHY_OPT_CNTL,
+                                                   0x1200);
+                        }
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+                        bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+                        /* Wait for soft reset to get cleared upto 1 sec */
+                        for (cnt = 0; cnt < 1000; cnt++) {
+                                bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                                ext_phy_addr,
+                                                EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                                EXT_PHY_OPT_CNTL, &ctrl);
+                                if (!(ctrl & (1<<15)))
+                                        break;
+                                msleep(1);
+                        }
+                        DP(NETIF_MSG_LINK,
+                           "8072 control reg 0x%x (after %d ms)\n",
+                           ctrl, cnt);
+
+                        bnx2x_bcm8072_external_rom_boot(bp);
+                        DP(NETIF_MSG_LINK, "Finshed loading 8072 KR ROM\n");
+
+                        /* enable LASI */
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                                ext_phy_addr,
+                                                EXT_PHY_KR_PMA_PMD_DEVAD,
+                                                0x9000, 0x0400);
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                                ext_phy_addr,
+                                                EXT_PHY_KR_PMA_PMD_DEVAD,
+                                                EXT_PHY_KR_LASI_CNTL, 0x0004);
+
+                        /* If this is forced speed, set to KR or KX
+                         * (all other are not supported)
+                         */
+                        if (!(bp->req_autoneg & AUTONEG_SPEED)) {
+                                if (bp->req_line_speed == SPEED_10000) {
+                                        bnx2x_bcm8072_force_10G(bp);
+                                        DP(NETIF_MSG_LINK,
+                                           "Forced speed 10G on 8072\n");
+                                        /* unlock */
+                                        bnx2x_hw_unlock(bp,
+                                                HW_LOCK_RESOURCE_8072_MDIO);
+                                        break;
+                                } else
+                                        val = (1<<5);
+                        } else {
+
+                                /* Advertise 10G/1G support */
+                                if (bp->advertising &
+                                                ADVERTISED_1000baseT_Full)
+                                        val = (1<<5);
+                                if (bp->advertising &
+                                                ADVERTISED_10000baseT_Full)
+                                        val |= (1<<7);
+                        }
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                        ext_phy_addr,
+                                        EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                        0x11, val);
+                        /* Add support for CL37 ( passive mode ) I */
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                                ext_phy_addr,
+                                                EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                                0x8370, 0x040c);
+                        /* Add support for CL37 ( passive mode ) II */
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                                ext_phy_addr,
+                                                EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                                0xffe4, 0x20);
+                        /* Add support for CL37 ( passive mode ) III */
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                                ext_phy_addr,
+                                                EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                                0xffe0, 0x1000);
+                        /* Restart autoneg */
+                        msleep(500);
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                        ext_phy_addr,
+                                        EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                        EXT_PHY_KR_CTRL, 0x1200);
+                        DP(NETIF_MSG_LINK, "8072 Autoneg Restart: "
+                           "1G %ssupported  10G %ssupported\n",
+                           (val & (1<<5)) ? "" : "not ",
+                           (val & (1<<7)) ? "" : "not ");
+
+                        /* unlock */
+                        bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+                        DP(NETIF_MSG_LINK,
+                           "Setting the SFX7101 LASI indication\n");
+                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                            EXT_PHY_OPT_PMA_PMD_DEVAD,
                                             EXT_PHY_OPT_LASI_CNTL, 0x1);
+                        DP(NETIF_MSG_LINK,
+                           "Setting the SFX7101 LED to blink on traffic\n");
+                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                            EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                            0xC007, (1<<3));
+
+                        /* read modify write pause advertizing */
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                          EXT_PHY_KR_AUTO_NEG_ADVERT, &val);
+                        val &= ~EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH;
+                        /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
+                        if (bp->advertising & ADVERTISED_Pause)
+                                val |= EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE;
+
+                        if (bp->advertising & ADVERTISED_Asym_Pause) {
+                                val |=
+                                 EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC;
+                        }
+                        DP(NETIF_MSG_LINK, "SFX7101 AN advertize 0x%x\n", val);
+                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                            EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                            EXT_PHY_KR_AUTO_NEG_ADVERT, val);
+                        /* Restart autoneg */
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                          EXT_PHY_KR_CTRL, &val);
+                        val |= 0x200;
+                        bnx2x_mdio45_write(bp, ext_phy_addr,
+                                            EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                            EXT_PHY_KR_CTRL, val);
                         break;
 
                 default:
-                        DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
-                           bp->ext_phy_config);
+                        BNX2X_ERR("BAD XGXS ext_phy_config 0x%x\n",
+                                  bp->ext_phy_config);
                         break;
                 }
-                bp->phy_addr = local_phy;
 
         } else { /* SerDes */
-/*              ext_phy_addr = ((bp->ext_phy_config &
+/*              ext_phy_addr = ((bp->ext_phy_config &
                                  PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) >>
                                 PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT);
 */
@@ -2854,10 +3610,6 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp)
 
                 case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
                         DP(NETIF_MSG_LINK, "SerDes 5482\n");
-                        bnx2x_bits_en(bp,
-                                      NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
-                                      NIG_MASK_MI_INT);
-                        DP(NETIF_MSG_LINK, "enabled extenal phy int\n");
                         break;
 
                 default:
@@ -2871,8 +3623,22 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp)
 static void bnx2x_ext_phy_reset(struct bnx2x *bp)
 {
         u32 ext_phy_type;
-        u32 ext_phy_addr;
-        u32 local_phy;
+        u32 ext_phy_addr = ((bp->ext_phy_config &
+                             PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK);
+
+        /* The PHY reset is controled by GPIO 1
+         * Give it 1ms of reset pulse
+         */
+        if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) &&
+            (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) {
+                bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+                               MISC_REGISTERS_GPIO_OUTPUT_LOW);
+                msleep(1);
+                bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+                               MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+        }
 
         if (bp->phy_flags & PHY_XGXS_FLAG) {
                 ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
@@ -2883,15 +3649,24 @@ static void bnx2x_ext_phy_reset(struct bnx2x *bp)
 
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
-                        DP(NETIF_MSG_LINK, "XGXS 8705/6\n");
-                        local_phy = bp->phy_addr;
-                        ext_phy_addr = ((bp->ext_phy_config &
-                                        PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                                        PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-                        bp->phy_addr = (u8)ext_phy_addr;
-                        bnx2x_mdio45_write(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+                        DP(NETIF_MSG_LINK, "XGXS 8705/8706\n");
+                        bnx2x_mdio45_write(bp, ext_phy_addr,
+                                           EXT_PHY_OPT_PMA_PMD_DEVAD,
                                            EXT_PHY_OPT_CNTL, 0xa040);
-                        bp->phy_addr = local_phy;
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+                        DP(NETIF_MSG_LINK, "XGXS 8072\n");
+                        bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                                ext_phy_addr,
+                                                EXT_PHY_KR_PMA_PMD_DEVAD,
+                                                0, 1<<15);
+                        bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+                        DP(NETIF_MSG_LINK, "XGXS SFX7101\n");
                         break;
 
                 default:
@@ -2930,6 +3705,7 @@ static void bnx2x_link_initialize(struct bnx2x *bp)
                         NIG_MASK_SERDES0_LINK_STATUS |
                         NIG_MASK_MI_INT));
 
+        /* Activate the external PHY */
         bnx2x_ext_phy_reset(bp);
 
         bnx2x_set_aer_mmd(bp);
@@ -2994,13 +3770,13 @@ static void bnx2x_link_initialize(struct bnx2x *bp)
                         /* AN enabled */
                         bnx2x_set_brcm_cl37_advertisment(bp);
 
-                        /* program duplex & pause advertisment (for aneg) */
+                        /* program duplex & pause advertisement (for aneg) */
                         bnx2x_set_ieee_aneg_advertisment(bp);
 
                         /* enable autoneg */
                         bnx2x_set_autoneg(bp);
 
-                        /* enalbe and restart AN */
+                        /* enable and restart AN */
                         bnx2x_restart_autoneg(bp);
                 }
 
@@ -3010,11 +3786,11 @@ static void bnx2x_link_initialize(struct bnx2x *bp)
                 bnx2x_initialize_sgmii_process(bp);
         }
 
-        /* enable the interrupt */
-        bnx2x_link_int_enable(bp);
-
         /* init ext phy and enable link state int */
         bnx2x_ext_phy_init(bp);
+
+        /* enable the interrupt */
+        bnx2x_link_int_enable(bp);
 }
 
 static void bnx2x_phy_deassert(struct bnx2x *bp)
@@ -3073,6 +3849,11 @@ static int bnx2x_phy_init(struct bnx2x *bp)
 static void bnx2x_link_reset(struct bnx2x *bp)
 {
         int port = bp->port;
+        u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK);
+
+        /* update shared memory */
+        bp->link_status = 0;
+        bnx2x_update_mng(bp);
 
         /* disable attentions */
         bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
@@ -3081,21 +3862,45 @@ static void bnx2x_link_reset(struct bnx2x *bp)
                         NIG_MASK_SERDES0_LINK_STATUS |
                         NIG_MASK_MI_INT));
 
-        bnx2x_ext_phy_reset(bp);
+        /* activate nig drain */
+        NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+
+        /* disable nig egress interface */
+        NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0);
+        NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
+
+        /* Stop BigMac rx */
+        bnx2x_bmac_rx_disable(bp);
+
+        /* disable emac */
+        NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
+        msleep(10);
+
+        /* The PHY reset is controled by GPIO 1
+         * Hold it as output low
+         */
+        if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) &&
+            (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) {
+                bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+                               MISC_REGISTERS_GPIO_OUTPUT_LOW);
+                DP(NETIF_MSG_LINK, "reset external PHY\n");
+        }
 
         /* reset the SerDes/XGXS */
         REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR,
                (0x1ff << (port*16)));
 
-        /* reset EMAC / BMAC and disable NIG interfaces */
-        NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0);
-        NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0);
+        /* reset BigMac */
+        REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+               (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
 
-        NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0);
+        /* disable nig ingress interface */
+        NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0);
         NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0);
-        NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
 
-        NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+        /* set link down */
+        bp->link_up = 0;
 }
 
 #ifdef BNX2X_XGXS_LB
@@ -3158,7 +3963,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
         int port = bp->port;
 
         DP(NETIF_MSG_TIMER,
-           "spe (%x:%x)  command %x  hw_cid %x  data (%x:%x)  left %x\n",
+           "spe (%x:%x)  command %d  hw_cid %x  data (%x:%x)  left %x\n",
            (u32)U64_HI(bp->spq_mapping), (u32)(U64_LO(bp->spq_mapping) +
            (void *)bp->spq_prod_bd - (void *)bp->spq), command,
            HW_CID(bp, cid), data_hi, data_lo, bp->spq_left);
@@ -3176,6 +3981,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
                 bnx2x_panic();
                 return -EBUSY;
         }
+
         /* CID needs port number to be encoded int it */
         bp->spq_prod_bd->hdr.conn_and_cmd_data =
                         cpu_to_le32(((command << SPE_HDR_CMD_ID_SHIFT) |
@@ -3282,8 +4088,8 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
         u32 igu_addr = (IGU_ADDR_ATTN_BITS_SET + IGU_PORT_BASE * port) * 8;
         u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
                               MISC_REG_AEU_MASK_ATTN_FUNC_0;
-        u32 nig_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
-                                   NIG_REG_MASK_INTERRUPT_PORT0;
+        u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
+                                       NIG_REG_MASK_INTERRUPT_PORT0;
 
         if (~bp->aeu_mask & (asserted & 0xff))
                 BNX2X_ERR("IGU ERROR\n");
@@ -3301,15 +4107,11 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
 
         if (asserted & ATTN_HARD_WIRED_MASK) {
                 if (asserted & ATTN_NIG_FOR_FUNC) {
-                        u32 nig_status_port;
-                        u32 nig_int_addr = port ?
-                                        NIG_REG_STATUS_INTERRUPT_PORT1 :
-                                        NIG_REG_STATUS_INTERRUPT_PORT0;
 
-                        bp->nig_mask = REG_RD(bp, nig_mask_addr);
-                        REG_WR(bp, nig_mask_addr, 0);
+                        /* save nig interrupt mask */
+                        bp->nig_mask = REG_RD(bp, nig_int_mask_addr);
+                        REG_WR(bp, nig_int_mask_addr, 0);
 
-                        nig_status_port = REG_RD(bp, nig_int_addr);
                         bnx2x_link_update(bp);
 
                         /* handle unicore attn? */
@@ -3362,15 +4164,132 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
 
         /* now set back the mask */
         if (asserted & ATTN_NIG_FOR_FUNC)
-                REG_WR(bp, nig_mask_addr, bp->nig_mask);
+                REG_WR(bp, nig_int_mask_addr, bp->nig_mask);
 }
 
-static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
+static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
 {
         int port = bp->port;
-        int index;
+        int reg_offset;
+        u32 val;
+
+        if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
+
+                reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
+                                     MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+
+                val = REG_RD(bp, reg_offset);
+                val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
+                REG_WR(bp, reg_offset, val);
+
+                BNX2X_ERR("SPIO5 hw attention\n");
+
+                switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+                case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
+                        /* Fan failure attention */
+
+                        /* The PHY reset is controled by GPIO 1 */
+                        bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+                                       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+                        /* Low power mode is controled by GPIO 2 */
+                        bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+                                       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+                        /* mark the failure */
+                        bp->ext_phy_config &=
+                                        ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
+                        bp->ext_phy_config |=
+                                        PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
+                        SHMEM_WR(bp,
+                                 dev_info.port_hw_config[port].
+                                                        external_phy_config,
+                                 bp->ext_phy_config);
+                        /* log the failure */
+                        printk(KERN_ERR PFX "Fan Failure on Network"
+                               " Controller %s has caused the driver to"
+                               " shutdown the card to prevent permanent"
+                               " damage.  Please contact Dell Support for"
+                               " assistance\n", bp->dev->name);
+                        break;
+
+                default:
+                        break;
+                }
+        }
+}
+
+static inline void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn)
+{
+        u32 val;
+
+        if (attn & BNX2X_DOORQ_ASSERT) {
+
+                val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR);
+                BNX2X_ERR("DB hw attention 0x%x\n", val);
+                /* DORQ discard attention */
+                if (val & 0x2)
+                        BNX2X_ERR("FATAL error from DORQ\n");
+        }
+}
+
+static inline void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn)
+{
+        u32 val;
+
+        if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
+
+                val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR);
+                BNX2X_ERR("CFC hw attention 0x%x\n", val);
+                /* CFC error attention */
+                if (val & 0x2)
+                        BNX2X_ERR("FATAL error from CFC\n");
+        }
+
+        if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
+
+                val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0);
+                BNX2X_ERR("PXP hw attention 0x%x\n", val);
+                /* RQ_USDMDP_FIFO_OVERFLOW */
+                if (val & 0x18000)
+                        BNX2X_ERR("FATAL error from PXP\n");
+        }
+}
+
+static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
+{
+        if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {
+
+                if (attn & BNX2X_MC_ASSERT_BITS) {
+
+                        BNX2X_ERR("MC assert!\n");
+                        REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0);
+                        REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0);
+                        REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0);
+                        REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0);
+                        bnx2x_panic();
+
+                } else if (attn & BNX2X_MCP_ASSERT) {
+
+                        BNX2X_ERR("MCP assert!\n");
+                        REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0);
+                        bnx2x_mc_assert(bp);
+
+                } else
+                        BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn);
+        }
+
+        if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
+
+                REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
+                BNX2X_ERR("LATCHED attention 0x%x (masked)\n", attn);
+        }
+}
+
+static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
+{
         struct attn_route attn;
         struct attn_route group_mask;
+        int port = bp->port;
+        int index;
         u32 reg_addr;
         u32 val;
 
@@ -3391,64 +4310,14 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
                         DP(NETIF_MSG_HW, "group[%d]: %llx\n", index,
                            (unsigned long long)group_mask.sig[0]);
 
-                        if (attn.sig[3] & group_mask.sig[3] &
-                            EVEREST_GEN_ATTN_IN_USE_MASK) {
-
-                                if (attn.sig[3] & BNX2X_MC_ASSERT_BITS) {
-
-                                        BNX2X_ERR("MC assert!\n");
-                                        bnx2x_panic();
-
-                                } else if (attn.sig[3] & BNX2X_MCP_ASSERT) {
-
-                                        BNX2X_ERR("MCP assert!\n");
-                                        REG_WR(bp,
-                                             MISC_REG_AEU_GENERAL_ATTN_11, 0);
-                                        bnx2x_mc_assert(bp);
-
-                                } else {
-                                        BNX2X_ERR("UNKOWEN HW ASSERT!\n");
-                                }
-                        }
-
-                        if (attn.sig[1] & group_mask.sig[1] &
-                            BNX2X_DOORQ_ASSERT) {
-
-                                val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR);
-                                BNX2X_ERR("DB hw attention 0x%x\n", val);
-                                /* DORQ discard attention */
-                                if (val & 0x2)
-                                        BNX2X_ERR("FATAL error from DORQ\n");
-                        }
-
-                        if (attn.sig[2] & group_mask.sig[2] &
-                            AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
-
-                                val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR);
-                                BNX2X_ERR("CFC hw attention 0x%x\n", val);
-                                /* CFC error attention */
-                                if (val & 0x2)
-                                        BNX2X_ERR("FATAL error from CFC\n");
-                        }
-
-                        if (attn.sig[2] & group_mask.sig[2] &
-                            AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
-
-                                val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0);
-                                BNX2X_ERR("PXP hw attention 0x%x\n", val);
-                                /* RQ_USDMDP_FIFO_OVERFLOW */
-                                if (val & 0x18000)
-                                        BNX2X_ERR("FATAL error from PXP\n");
-                        }
-
-                        if (attn.sig[3] & group_mask.sig[3] &
-                            EVEREST_LATCHED_ATTN_IN_USE_MASK) {
-
-                                REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL,
-                                       0x7ff);
-                                DP(NETIF_MSG_HW, "got latched bits 0x%x\n",
-                                   attn.sig[3]);
-                        }
+                        bnx2x_attn_int_deasserted3(bp,
+                                        attn.sig[3] & group_mask.sig[3]);
+                        bnx2x_attn_int_deasserted1(bp,
+                                        attn.sig[1] & group_mask.sig[1]);
+                        bnx2x_attn_int_deasserted2(bp,
+                                        attn.sig[2] & group_mask.sig[2]);
+                        bnx2x_attn_int_deasserted0(bp,
+                                        attn.sig[0] & group_mask.sig[0]);
 
                         if ((attn.sig[0] & group_mask.sig[0] &
                                                 HW_INTERRUT_ASSERT_SET_0) ||
@@ -3456,7 +4325,15 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
                                                 HW_INTERRUT_ASSERT_SET_1) ||
                             (attn.sig[2] & group_mask.sig[2] &
                                                 HW_INTERRUT_ASSERT_SET_2))
-                                BNX2X_ERR("FATAL HW block attention\n");
+                                BNX2X_ERR("FATAL HW block attention"
+                                          "  set0 0x%x  set1 0x%x"
+                                          "  set2 0x%x\n",
+                                          (attn.sig[0] & group_mask.sig[0] &
+                                           HW_INTERRUT_ASSERT_SET_0),
+                                          (attn.sig[1] & group_mask.sig[1] &
+                                           HW_INTERRUT_ASSERT_SET_1),
+                                          (attn.sig[2] & group_mask.sig[2] &
+                                           HW_INTERRUT_ASSERT_SET_2));
 
                         if ((attn.sig[0] & group_mask.sig[0] &
                                                 HW_PRTY_ASSERT_SET_0) ||
@@ -3464,7 +4341,7 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
                                                 HW_PRTY_ASSERT_SET_1) ||
                             (attn.sig[2] & group_mask.sig[2] &
                                                 HW_PRTY_ASSERT_SET_2))
-                                BNX2X_ERR("FATAL HW block parity atention\n");
+                               BNX2X_ERR("FATAL HW block parity attention\n");
                 }
         }
 
@@ -3529,7 +4406,7 @@ static void bnx2x_sp_task(struct work_struct *work)
 
         /* Return here if interrupt is disabled */
         if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-                DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
+                DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n");
                 return;
         }
 
@@ -3539,12 +4416,11 @@ static void bnx2x_sp_task(struct work_struct *work)
 
         DP(NETIF_MSG_INTR, "got a slowpath interrupt (updated %x)\n", status);
 
-        if (status & 0x1) {
-                /* HW attentions */
+        /* HW attentions */
+        if (status & 0x1)
                 bnx2x_attn_int(bp);
-        }
 
-        /* CStorm events: query_stats, cfc delete ramrods */
+        /* CStorm events: query_stats, port delete ramrod */
         if (status & 0x2)
                 bp->stat_pending = 0;
 
@@ -3558,6 +4434,7 @@ static void bnx2x_sp_task(struct work_struct *work)
                      IGU_INT_NOP, 1);
         bnx2x_ack_sb(bp, DEF_SB_ID, TSTORM_ID, le16_to_cpu(bp->def_t_idx),
                      IGU_INT_ENABLE, 1);
+
 }
 
 static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
@@ -3567,11 +4444,11 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
 
         /* Return here if interrupt is disabled */
         if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-                DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
+                DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n");
                 return IRQ_HANDLED;
         }
 
-        bnx2x_ack_sb(bp, 16, XSTORM_ID, 0, IGU_INT_DISABLE, 0);
+        bnx2x_ack_sb(bp, DEF_SB_ID, XSTORM_ID, 0, IGU_INT_DISABLE, 0);
 
 #ifdef BNX2X_STOP_ON_ERROR
         if (unlikely(bp->panic))
@@ -3906,7 +4783,7 @@ static void bnx2x_stop_stats(struct bnx2x *bp)
 
                 while (bp->stats_state != STATS_STATE_DISABLE) {
                         if (!timeout) {
-                                BNX2X_ERR("timeout wating for stats stop\n");
+                                BNX2X_ERR("timeout waiting for stats stop\n");
                                 break;
                         }
                         timeout--;
@@ -4173,39 +5050,37 @@ static void bnx2x_update_net_stats(struct bnx2x *bp)
 
         nstats->rx_bytes = bnx2x_hilo(&estats->total_bytes_received_hi);
 
-        nstats->tx_bytes =
-                bnx2x_hilo(&estats->total_bytes_transmitted_hi);
+        nstats->tx_bytes = bnx2x_hilo(&estats->total_bytes_transmitted_hi);
 
-        nstats->rx_dropped = estats->checksum_discard +
-                                   estats->mac_discard;
+        nstats->rx_dropped = estats->checksum_discard + estats->mac_discard;
         nstats->tx_dropped = 0;
 
         nstats->multicast =
                 bnx2x_hilo(&estats->total_multicast_packets_transmitted_hi);
 
-        nstats->collisions =
-                estats->single_collision_transmit_frames +
-                estats->multiple_collision_transmit_frames +
-                estats->late_collision_frames +
-                estats->excessive_collision_frames;
+        nstats->collisions = estats->single_collision_transmit_frames +
+                             estats->multiple_collision_transmit_frames +
+                             estats->late_collision_frames +
+                             estats->excessive_collision_frames;
 
         nstats->rx_length_errors = estats->runt_packets_received +
                                    estats->jabber_packets_received;
-        nstats->rx_over_errors = estats->no_buff_discard;
+        nstats->rx_over_errors = estats->brb_discard +
+                                 estats->brb_truncate_discard;
         nstats->rx_crc_errors = estats->crc_receive_errors;
         nstats->rx_frame_errors = estats->alignment_errors;
-        nstats->rx_fifo_errors = estats->brb_discard +
-                                       estats->brb_truncate_discard;
+        nstats->rx_fifo_errors = estats->no_buff_discard;
         nstats->rx_missed_errors = estats->xxoverflow_discard;
 
         nstats->rx_errors = nstats->rx_length_errors +
                             nstats->rx_over_errors +
                             nstats->rx_crc_errors +
                             nstats->rx_frame_errors +
-                            nstats->rx_fifo_errors;
+                            nstats->rx_fifo_errors +
+                            nstats->rx_missed_errors;
 
         nstats->tx_aborted_errors = estats->late_collision_frames +
-                                          estats->excessive_collision_frames;
+                                    estats->excessive_collision_frames;
         nstats->tx_carrier_errors = estats->false_carrier_detections;
         nstats->tx_fifo_errors = 0;
         nstats->tx_heartbeat_errors = 0;
@@ -4334,7 +5209,7 @@ static void bnx2x_timer(unsigned long data)
                 return;
 
         if (atomic_read(&bp->intr_sem) != 0)
-                goto bnx2x_restart_timer;
+                goto timer_restart;
 
         if (poll) {
                 struct bnx2x_fastpath *fp = &bp->fp[0];
@@ -4344,7 +5219,7 @@ static void bnx2x_timer(unsigned long data)
                 rc = bnx2x_rx_int(fp, 1000);
         }
 
-        if (!nomcp && (bp->bc_ver >= 0x040003)) {
+        if (!nomcp) {
                 int port = bp->port;
                 u32 drv_pulse;
                 u32 mcp_pulse;
@@ -4353,9 +5228,9 @@ static void bnx2x_timer(unsigned long data)
                 bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
                 /* TBD - add SYSTEM_TIME */
                 drv_pulse = bp->fw_drv_pulse_wr_seq;
-                SHMEM_WR(bp, drv_fw_mb[port].drv_pulse_mb, drv_pulse);
+                SHMEM_WR(bp, func_mb[port].drv_pulse_mb, drv_pulse);
 
-                mcp_pulse = (SHMEM_RD(bp, drv_fw_mb[port].mcp_pulse_mb) &
+                mcp_pulse = (SHMEM_RD(bp, func_mb[port].mcp_pulse_mb) &
                              MCP_PULSE_SEQ_MASK);
                 /* The delta between driver pulse and mcp response
                  * should be 1 (before mcp response) or 0 (after mcp response)
@@ -4369,11 +5244,11 @@ static void bnx2x_timer(unsigned long data)
         }
 
         if (bp->stats_state == STATS_STATE_DISABLE)
-                goto bnx2x_restart_timer;
+                goto timer_restart;
 
         bnx2x_update_stats(bp);
 
-bnx2x_restart_timer:
+timer_restart:
         mod_timer(&bp->timer, jiffies + bp->current_interval);
 }
 
@@ -4438,6 +5313,9 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                             atten_status_block);
         def_sb->atten_status_block.status_block_id = id;
 
+        bp->def_att_idx = 0;
+        bp->attn_state = 0;
+
         reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
                              MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
 
@@ -4472,6 +5350,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                             u_def_status_block);
         def_sb->u_def_status_block.status_block_id = id;
 
+        bp->def_u_idx = 0;
+
         REG_WR(bp, BAR_USTRORM_INTMEM +
                USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section));
         REG_WR(bp, BAR_USTRORM_INTMEM +
@@ -4489,6 +5369,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                             c_def_status_block);
         def_sb->c_def_status_block.status_block_id = id;
 
+        bp->def_c_idx = 0;
+
         REG_WR(bp, BAR_CSTRORM_INTMEM +
                CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section));
         REG_WR(bp, BAR_CSTRORM_INTMEM +
@@ -4506,6 +5388,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                             t_def_status_block);
         def_sb->t_def_status_block.status_block_id = id;
 
+        bp->def_t_idx = 0;
+
         REG_WR(bp, BAR_TSTRORM_INTMEM +
                TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section));
         REG_WR(bp, BAR_TSTRORM_INTMEM +
@@ -4523,6 +5407,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                             x_def_status_block);
         def_sb->x_def_status_block.status_block_id = id;
 
+        bp->def_x_idx = 0;
+
         REG_WR(bp, BAR_XSTRORM_INTMEM +
                XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section));
         REG_WR(bp, BAR_XSTRORM_INTMEM +
@@ -4535,6 +5421,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                 REG_WR16(bp, BAR_XSTRORM_INTMEM +
                          XSTORM_DEF_SB_HC_DISABLE_OFFSET(port, index), 0x1);
 
+        bp->stat_pending = 0;
+
         bnx2x_ack_sb(bp, id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
 }
 
@@ -4626,7 +5514,7 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
                 fp->rx_bd_prod = fp->rx_comp_prod = ring_prod;
                 fp->rx_pkt = fp->rx_calls = 0;
 
-                /* Warning! this will genrate an interrupt (to the TSTORM) */
+                /* Warning! this will generate an interrupt (to the TSTORM) */
                 /* must only be done when chip is initialized */
                 REG_WR(bp, BAR_TSTRORM_INTMEM +
                        TSTORM_RCQ_PROD_OFFSET(port, j), ring_prod);
@@ -4678,7 +5566,6 @@ static void bnx2x_init_sp_ring(struct bnx2x *bp)
 
         bp->spq_left = MAX_SPQ_PENDING;
         bp->spq_prod_idx = 0;
-        bp->dsb_sp_prod_idx = 0;
         bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX;
         bp->spq_prod_bd = bp->spq;
         bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT;
@@ -4755,6 +5642,42 @@ static void bnx2x_init_ind_table(struct bnx2x *bp)
         REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
 }
 
+static void bnx2x_set_client_config(struct bnx2x *bp)
+{
+#ifdef BCM_VLAN
+        int mode = bp->rx_mode;
+#endif
+        int i, port = bp->port;
+        struct tstorm_eth_client_config tstorm_client = {0};
+
+        tstorm_client.mtu = bp->dev->mtu;
+        tstorm_client.statistics_counter_id = 0;
+        tstorm_client.config_flags =
+                                TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
+#ifdef BCM_VLAN
+        if (mode && bp->vlgrp) {
+                tstorm_client.config_flags |=
+                                TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE;
+                DP(NETIF_MSG_IFUP, "vlan removal enabled\n");
+        }
+#endif
+        if (mode != BNX2X_RX_MODE_PROMISC)
+                tstorm_client.drop_flags =
+                                TSTORM_ETH_CLIENT_CONFIG_DROP_MAC_ERR;
+
+        for_each_queue(bp, i) {
+                REG_WR(bp, BAR_TSTRORM_INTMEM +
+                       TSTORM_CLIENT_CONFIG_OFFSET(port, i),
+                       ((u32 *)&tstorm_client)[0]);
+                REG_WR(bp, BAR_TSTRORM_INTMEM +
+                       TSTORM_CLIENT_CONFIG_OFFSET(port, i) + 4,
+                       ((u32 *)&tstorm_client)[1]);
+        }
+
+/*      DP(NETIF_MSG_IFUP, "tstorm_client: 0x%08x 0x%08x\n",
+           ((u32 *)&tstorm_client)[0], ((u32 *)&tstorm_client)[1]); */
+}
+
 static void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
 {
         int mode = bp->rx_mode;
@@ -4794,41 +5717,9 @@ static void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
 /*              DP(NETIF_MSG_IFUP, "tstorm_mac_filter[%d]: 0x%08x\n", i,
                    ((u32 *)&tstorm_mac_filter)[i]); */
         }
-}
 
-static void bnx2x_set_client_config(struct bnx2x *bp, int client_id)
-{
-#ifdef BCM_VLAN
-        int mode = bp->rx_mode;
-#endif
-        int port = bp->port;
-        struct tstorm_eth_client_config tstorm_client = {0};
-
-        tstorm_client.mtu = bp->dev->mtu;
-        tstorm_client.statistics_counter_id = 0;
-        tstorm_client.config_flags =
-                TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
-#ifdef BCM_VLAN
-        if (mode && bp->vlgrp) {
-                tstorm_client.config_flags |=
-                                TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE;
-                DP(NETIF_MSG_IFUP, "vlan removal enabled\n");
-        }
-#endif
-        tstorm_client.drop_flags = (TSTORM_ETH_CLIENT_CONFIG_DROP_IP_CS_ERR |
-                                    TSTORM_ETH_CLIENT_CONFIG_DROP_TCP_CS_ERR |
-                                    TSTORM_ETH_CLIENT_CONFIG_DROP_UDP_CS_ERR |
-                                    TSTORM_ETH_CLIENT_CONFIG_DROP_MAC_ERR);
-
-        REG_WR(bp, BAR_TSTRORM_INTMEM +
-               TSTORM_CLIENT_CONFIG_OFFSET(port, client_id),
-               ((u32 *)&tstorm_client)[0]);
-        REG_WR(bp, BAR_TSTRORM_INTMEM +
-               TSTORM_CLIENT_CONFIG_OFFSET(port, client_id) + 4,
-               ((u32 *)&tstorm_client)[1]);
-
-/*      DP(NETIF_MSG_IFUP, "tstorm_client: 0x%08x 0x%08x\n",
-           ((u32 *)&tstorm_client)[0], ((u32 *)&tstorm_client)[1]); */
+        if (mode != BNX2X_RX_MODE_NONE)
+                bnx2x_set_client_config(bp);
 }
 
 static void bnx2x_init_internal(struct bnx2x *bp)
@@ -4836,7 +5727,6 @@ static void bnx2x_init_internal(struct bnx2x *bp)
         int port = bp->port;
         struct tstorm_eth_function_common_config tstorm_config = {0};
         struct stats_indication_flags stats_flags = {0};
-        int i;
 
         if (is_multi(bp)) {
                 tstorm_config.config_flags = MULTI_FLAGS;
@@ -4850,13 +5740,9 @@ static void bnx2x_init_internal(struct bnx2x *bp)
 /*      DP(NETIF_MSG_IFUP, "tstorm_config: 0x%08x\n",
            (*(u32 *)&tstorm_config)); */
 
-        bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx untill link is up */
+        bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx until link is up */
         bnx2x_set_storm_rx_mode(bp);
 
-        for_each_queue(bp, i)
-                bnx2x_set_client_config(bp, i);
-
-
         stats_flags.collect_eth = cpu_to_le32(1);
 
         REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(port),
@@ -4902,7 +5788,7 @@ static void bnx2x_nic_init(struct bnx2x *bp)
         bnx2x_init_internal(bp);
         bnx2x_init_stats(bp);
         bnx2x_init_ind_table(bp);
-        bnx2x_enable_int(bp);
+        bnx2x_int_enable(bp);
 
 }
 
@@ -5265,8 +6151,10 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
         if (mode & 0x1) {       /* init common */
                 DP(BNX2X_MSG_MCP, "starting common init  func %d  mode %x\n",
                    func, mode);
-                REG_WR(bp, MISC_REG_RESET_REG_1, 0xffffffff);
-                REG_WR(bp, MISC_REG_RESET_REG_2, 0xfffc);
+                REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+                       0xffffffff);
+                REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+                       0xfffc);
                 bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END);
 
                 REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x100);
@@ -5359,7 +6247,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
                 REG_RD(bp, USEM_REG_PASSIVE_BUFFER + 8);
 #endif
                 bnx2x_init_block(bp, QM_COMMON_START, QM_COMMON_END);
-                /* softrest pulse */
+                /* soft reset pulse */
                 REG_WR(bp, QM_REG_SOFT_RESET, 1);
                 REG_WR(bp, QM_REG_SOFT_RESET, 0);
 
@@ -5413,7 +6301,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
                 REG_WR(bp, SRC_REG_SOFT_RST, 1);
                 for (i = SRC_REG_KEYRSS0_0; i <= SRC_REG_KEYRSS1_9; i += 4) {
                         REG_WR(bp, i, 0xc0cac01a);
-                        /* TODO: repleace with something meaningfull */
+                        /* TODO: replace with something meaningful */
                 }
                 /* SRCH COMMON comes here */
                 REG_WR(bp, SRC_REG_SOFT_RST, 0);
@@ -5486,6 +6374,28 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
                 enable_blocks_attention(bp);
                 /* enable_blocks_parity(bp); */
 
+                switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+                case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
+                        /* Fan failure is indicated by SPIO 5 */
+                        bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
+                                       MISC_REGISTERS_SPIO_INPUT_HI_Z);
+
+                        /* set to active low mode */
+                        val = REG_RD(bp, MISC_REG_SPIO_INT);
+                        val |= ((1 << MISC_REGISTERS_SPIO_5) <<
+                                        MISC_REGISTERS_SPIO_INT_OLD_SET_POS);
+                        REG_WR(bp, MISC_REG_SPIO_INT, val);
+
+                        /* enable interrupt to signal the IGU */
+                        val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
+                        val |= (1 << MISC_REGISTERS_SPIO_5);
+                        REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val);
+                        break;
+
+                default:
+                        break;
+                }
+
         } /* end of common init */
 
         /* per port init */
@@ -5645,9 +6555,21 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
         /* Port MCP comes here */
         /* Port DMAE comes here */
 
+        switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+        case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
+                /* add SPIO 5 to group 0 */
+                val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+                val |= AEU_INPUTS_ATTN_BITS_SPIO5;
+                REG_WR(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, val);
+                break;
+
+        default:
+                break;
+        }
+
         bnx2x_link_reset(bp);
 
-        /* Reset pciex errors for debug */
+        /* Reset PCIE errors for debug */
         REG_WR(bp, 0x2114, 0xffffffff);
         REG_WR(bp, 0x2120, 0xffffffff);
         REG_WR(bp, 0x2814, 0xffffffff);
@@ -5669,9 +6591,9 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
                 port = bp->port;
 
                 bp->fw_drv_pulse_wr_seq =
-                                (SHMEM_RD(bp, drv_fw_mb[port].drv_pulse_mb) &
+                                (SHMEM_RD(bp, func_mb[port].drv_pulse_mb) &
                                  DRV_PULSE_SEQ_MASK);
-                bp->fw_mb = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_param);
+                bp->fw_mb = SHMEM_RD(bp, func_mb[port].fw_mb_param);
                 DP(BNX2X_MSG_MCP, "drv_pulse 0x%x  fw_mb 0x%x\n",
                    bp->fw_drv_pulse_wr_seq, bp->fw_mb);
         } else {
@@ -5681,16 +6603,15 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
         return 0;
 }
 
-
-/* send the MCP a request, block untill there is a reply */
+/* send the MCP a request, block until there is a reply */
 static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
 {
-        u32 rc = 0;
-        u32 seq = ++bp->fw_seq;
         int port = bp->port;
+        u32 seq = ++bp->fw_seq;
+        u32 rc = 0;
 
-        SHMEM_WR(bp, drv_fw_mb[port].drv_mb_header, command|seq);
-        DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", command|seq);
+        SHMEM_WR(bp, func_mb[port].drv_mb_header, (command | seq));
+        DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
 
         /* let the FW do it's magic ... */
         msleep(100); /* TBD */
@@ -5698,19 +6619,20 @@ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
         if (CHIP_REV_IS_SLOW(bp))
                 msleep(900);
 
-        rc = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_header);
-
+        rc = SHMEM_RD(bp, func_mb[port].fw_mb_header);
         DP(BNX2X_MSG_MCP, "read (%x) seq is (%x) from FW MB\n", rc, seq);
 
         /* is this a reply to our command? */
         if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
                 rc &= FW_MSG_CODE_MASK;
+
         } else {
                 /* FW BUG! */
                 BNX2X_ERR("FW failed to respond!\n");
                 bnx2x_fw_dump(bp);
                 rc = 0;
         }
+
         return rc;
 }
 
@@ -5869,7 +6791,7 @@ static int bnx2x_alloc_mem(struct bnx2x *bp)
         for (i = 0; i < 16*1024; i += 64)
                 * (u64 *)((char *)bp->t2 + i + 56) = bp->t2_mapping + i + 64;
 
-        /* now sixup the last line in the block to point to the next block */
+        /* now fixup the last line in the block to point to the next block */
         *(u64 *)((char *)bp->t2 + 1024*16-8) = bp->t2_mapping;
 
         /* Timer block array (MAX_CONN*8) phys uncached for now 1024 conns */
@@ -5950,22 +6872,19 @@ static void bnx2x_free_msix_irqs(struct bnx2x *bp)
         int i;
 
         free_irq(bp->msix_table[0].vector, bp->dev);
-        DP(NETIF_MSG_IFDOWN, "rleased sp irq (%d)\n",
+        DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n",
            bp->msix_table[0].vector);
 
         for_each_queue(bp, i) {
-                DP(NETIF_MSG_IFDOWN, "about to rlease fp #%d->%d irq  "
+                DP(NETIF_MSG_IFDOWN, "about to release fp #%d->%d irq  "
                    "state(%x)\n", i, bp->msix_table[i + 1].vector,
                    bnx2x_fp(bp, i, state));
 
-                if (bnx2x_fp(bp, i, state) != BNX2X_FP_STATE_CLOSED) {
-
-                        free_irq(bp->msix_table[i + 1].vector, &bp->fp[i]);
-                        bnx2x_fp(bp, i, state) = BNX2X_FP_STATE_CLOSED;
-
-                } else
-                        DP(NETIF_MSG_IFDOWN, "irq not freed\n");
+                if (bnx2x_fp(bp, i, state) != BNX2X_FP_STATE_CLOSED)
+                        BNX2X_ERR("IRQ of fp #%d being freed while "
+                                  "state != closed\n", i);
 
+                free_irq(bp->msix_table[i + 1].vector, &bp->fp[i]);
         }
 
 }
@@ -5995,7 +6914,7 @@ static int bnx2x_enable_msix(struct bnx2x *bp)
 
         if (pci_enable_msix(bp->pdev, &bp->msix_table[0],
                                      bp->num_queues + 1)){
-                BNX2X_ERR("failed to enable msix\n");
+                BNX2X_LOG("failed to enable MSI-X\n");
                 return -1;
 
         }
@@ -6010,11 +6929,8 @@ static int bnx2x_enable_msix(struct bnx2x *bp)
 static int bnx2x_req_msix_irqs(struct bnx2x *bp)
 {
 
-
         int i, rc;
 
-        DP(NETIF_MSG_IFUP, "about to request sp irq\n");
-
         rc = request_irq(bp->msix_table[0].vector, bnx2x_msix_sp_int, 0,
                          bp->dev->name, bp->dev);
 
@@ -6029,7 +6945,8 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp)
                                  bp->dev->name, &bp->fp[i]);
 
                 if (rc) {
-                        BNX2X_ERR("request fp #%d irq failed\n", i);
+                        BNX2X_ERR("request fp #%d irq failed  "
+                                  "rc %d\n", i, rc);
                         bnx2x_free_msix_irqs(bp);
                         return -EBUSY;
                 }
@@ -6109,8 +7026,8 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
         /* can take a while if any port is running */
         int timeout = 500;
 
-        /* DP("waiting for state to become %d on IDX [%d]\n",
-        state, sb_idx); */
+        DP(NETIF_MSG_IFUP, "%s for state to become %x on IDX [%d]\n",
+           poll ? "polling" : "waiting", state, idx);
 
         might_sleep();
 
@@ -6128,7 +7045,7 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
 
                 mb(); /* state is changed by bnx2x_sp_event()*/
 
-                if (*state_p != state)
+                if (*state_p == state)
                         return 0;
 
                 timeout--;
@@ -6136,17 +7053,17 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
 
         }
 
-
         /* timeout! */
-        BNX2X_ERR("timeout waiting for ramrod %d on %d\n", state, idx);
-        return -EBUSY;
+        BNX2X_ERR("timeout %s for state %x on IDX [%d]\n",
+                  poll ? "polling" : "waiting", state, idx);
 
+        return -EBUSY;
 }
 
 static int bnx2x_setup_leading(struct bnx2x *bp)
 {
 
-        /* reset IGU staae */
+        /* reset IGU state */
         bnx2x_ack_sb(bp, DEF_SB_ID, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
 
         /* SETUP ramrod */
@@ -6162,12 +7079,13 @@ static int bnx2x_setup_multi(struct bnx2x *bp, int index)
         /* reset IGU state */
         bnx2x_ack_sb(bp, index, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
 
+        /* SETUP ramrod */
         bp->fp[index].state = BNX2X_FP_STATE_OPENING;
         bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CLIENT_SETUP, index, 0, index, 0);
 
         /* Wait for completion */
         return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_OPEN, index,
-                                 &(bp->fp[index].state), 1);
+                                 &(bp->fp[index].state), 0);
 
 }
 
@@ -6177,8 +7095,8 @@ static void bnx2x_set_rx_mode(struct net_device *dev);
 
 static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
 {
-        int rc;
-        int i = 0;
+        u32 load_code;
+        int i;
 
         bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
 
@@ -6188,26 +7106,28 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
            initialized, otherwise - not.
         */
         if (!nomcp) {
-                rc = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
-                if (rc == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+                load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
+                if (!load_code) {
+                        BNX2X_ERR("MCP response failure, unloading\n");
+                        return -EBUSY;
+                }
+                if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+                        BNX2X_ERR("MCP refused load request, unloading\n");
                         return -EBUSY; /* other port in diagnostic mode */
                 }
         } else {
-                rc = FW_MSG_CODE_DRV_LOAD_COMMON;
+                load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
         }
 
-        DP(NETIF_MSG_IFUP, "set number of queues to %d\n", bp->num_queues);
-
         /* if we can't use msix we only need one fp,
          * so try to enable msix with the requested number of fp's
          * and fallback to inta with one fp
          */
         if (req_irq) {
-
                 if (use_inta) {
                         bp->num_queues = 1;
                 } else {
-                        if (use_multi > 1 && use_multi <= 16)
+                        if ((use_multi > 1) && (use_multi <= 16))
                                 /* user requested number */
                                 bp->num_queues = use_multi;
                         else if (use_multi == 1)
@@ -6216,15 +7136,17 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
                                 bp->num_queues = 1;
 
                         if (bnx2x_enable_msix(bp)) {
-                                /* faild to enable msix */
+                                /* failed to enable msix */
                                 bp->num_queues = 1;
                                 if (use_multi)
-                                        BNX2X_ERR("Muti requested but failed"
+                                        BNX2X_ERR("Multi requested but failed"
                                                   " to enable MSI-X\n");
                         }
                 }
         }
 
+        DP(NETIF_MSG_IFUP, "set number of queues to %d\n", bp->num_queues);
+
         if (bnx2x_alloc_mem(bp))
                 return -ENOMEM;
 
@@ -6232,13 +7154,13 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
                 if (bp->flags & USING_MSIX_FLAG) {
                         if (bnx2x_req_msix_irqs(bp)) {
                                 pci_disable_msix(bp->pdev);
-                                goto out_error;
+                                goto load_error;
                         }
 
                 } else {
                         if (bnx2x_req_irq(bp)) {
                                 BNX2X_ERR("IRQ request failed, aborting\n");
-                                goto out_error;
+                                goto load_error;
                         }
                 }
         }
@@ -6249,31 +7171,25 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
 
 
         /* Initialize HW */
-        if (bnx2x_function_init(bp, (rc == FW_MSG_CODE_DRV_LOAD_COMMON))) {
+        if (bnx2x_function_init(bp,
+                                (load_code == FW_MSG_CODE_DRV_LOAD_COMMON))) {
                 BNX2X_ERR("HW init failed, aborting\n");
-                goto out_error;
+                goto load_error;
         }
 
 
         atomic_set(&bp->intr_sem, 0);
 
-        /* Reenable SP tasklet */
-        /*if (bp->sp_task_en) {                */
-        /*        tasklet_enable(&bp->sp_task);*/
-        /*} else {                             */
-        /*        bp->sp_task_en = 1;          */
-        /*}                                    */
 
         /* Setup NIC internals and enable interrupts */
         bnx2x_nic_init(bp);
 
         /* Send LOAD_DONE command to MCP */
         if (!nomcp) {
-                rc = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE);
-                DP(NETIF_MSG_IFUP, "rc = 0x%x\n", rc);
-                if (!rc) {
+                load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE);
+                if (!load_code) {
                         BNX2X_ERR("MCP response failure, unloading\n");
-                        goto int_disable;
+                        goto load_int_disable;
                 }
         }
 
@@ -6285,11 +7201,11 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
                 napi_enable(&bnx2x_fp(bp, i, napi));
 
         if (bnx2x_setup_leading(bp))
-                goto stop_netif;
+                goto load_stop_netif;
 
         for_each_nondefault_queue(bp, i)
                 if (bnx2x_setup_multi(bp, i))
-                        goto stop_netif;
+                        goto load_stop_netif;
 
         bnx2x_set_mac_addr(bp);
 
@@ -6313,42 +7229,24 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
 
         return 0;
 
-stop_netif:
+load_stop_netif:
         for_each_queue(bp, i)
                 napi_disable(&bnx2x_fp(bp, i, napi));
 
-int_disable:
-        bnx2x_disable_int_sync(bp);
+load_int_disable:
+        bnx2x_int_disable_sync(bp);
 
         bnx2x_free_skbs(bp);
         bnx2x_free_irq(bp);
 
-out_error:
+load_error:
         bnx2x_free_mem(bp);
 
         /* TBD we really need to reset the chip
            if we want to recover from this */
-        return rc;
+        return -EBUSY;
 }
 
-static void bnx2x_netif_stop(struct bnx2x *bp)
-{
-        int i;
-
-        bp->rx_mode = BNX2X_RX_MODE_NONE;
-        bnx2x_set_storm_rx_mode(bp);
-
-        bnx2x_disable_int_sync(bp);
-        bnx2x_link_reset(bp);
-
-        for_each_queue(bp, i)
-                napi_disable(&bnx2x_fp(bp, i, napi));
-
-        if (netif_running(bp->dev)) {
-                netif_tx_disable(bp->dev);
-                bp->dev->trans_start = jiffies; /* prevent tx timeout */
-        }
-}
 
 static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
 {
@@ -6401,20 +7299,20 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index)
 
         int rc;
 
-        /* halt the connnection */
+        /* halt the connection */
         bp->fp[index].state = BNX2X_FP_STATE_HALTING;
         bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, index, 0, 0, 0);
 
 
         rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, index,
                                        &(bp->fp[index].state), 1);
-        if (rc) /* timout */
+        if (rc) /* timeout */
                 return rc;
 
         /* delete cfc entry */
         bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CFC_DEL, index, 0, 0, 1);
 
-        return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_DELETED, index,
+        return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_CLOSED, index,
                                  &(bp->fp[index].state), 1);
 
 }
@@ -6422,8 +7320,8 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index)
 
 static void bnx2x_stop_leading(struct bnx2x *bp)
 {
-
-        /* if the other port is hadling traffic,
+        u16 dsb_sp_prod_idx;
+        /* if the other port is handling traffic,
            this can take a lot of time */
         int timeout = 500;
 
@@ -6437,52 +7335,71 @@ static void bnx2x_stop_leading(struct bnx2x *bp)
                                &(bp->fp[0].state), 1))
                 return;
 
-        bp->dsb_sp_prod_idx = *bp->dsb_sp_prod;
+        dsb_sp_prod_idx = *bp->dsb_sp_prod;
 
-        /* Send CFC_DELETE ramrod */
+        /* Send PORT_DELETE ramrod */
         bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_PORT_DEL, 0, 0, 0, 1);
 
-        /*
-           Wait for completion.
+        /* Wait for completion to arrive on default status block
            we are going to reset the chip anyway
            so there is not much to do if this times out
          */
-        while (bp->dsb_sp_prod_idx == *bp->dsb_sp_prod && timeout) {
-                        timeout--;
-                        msleep(1);
+        while ((dsb_sp_prod_idx == *bp->dsb_sp_prod) && timeout) {
+                timeout--;
+                msleep(1);
         }
-
+        if (!timeout) {
+                DP(NETIF_MSG_IFDOWN, "timeout polling for completion "
+                   "dsb_sp_prod 0x%x != dsb_sp_prod_idx 0x%x\n",
+                   *bp->dsb_sp_prod, dsb_sp_prod_idx);
+        }
+        bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
+        bp->fp[0].state = BNX2X_FP_STATE_CLOSED;
 }
 
-static int bnx2x_nic_unload(struct bnx2x *bp, int fre_irq)
+
+static int bnx2x_nic_unload(struct bnx2x *bp, int free_irq)
 {
         u32 reset_code = 0;
-        int rc;
-        int i;
+        int i, timeout;
 
         bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
 
-        /* Calling flush_scheduled_work() may deadlock because
-         * linkwatch_event() may be on the workqueue and it will try to get
-         * the rtnl_lock which we are holding.
-         */
+        del_timer_sync(&bp->timer);
 
-        while (bp->in_reset_task)
-                msleep(1);
+        bp->rx_mode = BNX2X_RX_MODE_NONE;
+        bnx2x_set_storm_rx_mode(bp);
 
-        /* Delete the timer: do it before disabling interrupts, as it
-           may be stil STAT_QUERY ramrod pending after stopping the timer */
-        del_timer_sync(&bp->timer);
+        if (netif_running(bp->dev)) {
+                netif_tx_disable(bp->dev);
+                bp->dev->trans_start = jiffies; /* prevent tx timeout */
+        }
+
+        /* Wait until all fast path tasks complete */
+        for_each_queue(bp, i) {
+                struct bnx2x_fastpath *fp = &bp->fp[i];
+
+                timeout = 1000;
+                while (bnx2x_has_work(fp) && (timeout--))
+                        msleep(1);
+                if (!timeout)
+                        BNX2X_ERR("timeout waiting for queue[%d]\n", i);
+        }
 
         /* Wait until stat ramrod returns and all SP tasks complete */
-        while (bp->stat_pending && (bp->spq_left != MAX_SPQ_PENDING))
+        timeout = 1000;
+        while ((bp->stat_pending || (bp->spq_left != MAX_SPQ_PENDING)) &&
+               (timeout--))
                 msleep(1);
 
-        /* Stop fast path, disable MAC, disable interrupts, disable napi */
-        bnx2x_netif_stop(bp);
+        for_each_queue(bp, i)
+                napi_disable(&bnx2x_fp(bp, i, napi));
+        /* Disable interrupts after Tx and Rx are disabled on stack level */
+        bnx2x_int_disable_sync(bp);
 
         if (bp->flags & NO_WOL_FLAG)
                 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
+
         else if (bp->wol) {
                 u32 emac_base = bp->port ? GRCBASE_EMAC0 : GRCBASE_EMAC1;
                 u8 *mac_addr = bp->dev->dev_addr;
@@ -6499,28 +7416,37 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int fre_irq)
                 EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + 4, val);
 
                 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
+
         } else
                 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
 
+        /* Close multi and leading connections */
         for_each_nondefault_queue(bp, i)
                 if (bnx2x_stop_multi(bp, i))
-                        goto error;
-
+                        goto unload_error;
 
         bnx2x_stop_leading(bp);
+        if ((bp->state != BNX2X_STATE_CLOSING_WAIT4_UNLOAD) ||
+            (bp->fp[0].state != BNX2X_FP_STATE_CLOSED)) {
+                DP(NETIF_MSG_IFDOWN, "failed to close leading properly!"
+                   "state 0x%x  fp[0].state 0x%x",
+                   bp->state, bp->fp[0].state);
+        }
+
+unload_error:
+        bnx2x_link_reset(bp);
 
-error:
         if (!nomcp)
-                rc = bnx2x_fw_command(bp, reset_code);
+                reset_code = bnx2x_fw_command(bp, reset_code);
         else
-                rc = FW_MSG_CODE_DRV_UNLOAD_COMMON;
+                reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON;
 
         /* Release IRQs */
-        if (fre_irq)
+        if (free_irq)
                 bnx2x_free_irq(bp);
 
         /* Reset the chip */
-        bnx2x_reset_chip(bp, rc);
+        bnx2x_reset_chip(bp, reset_code);
 
         /* Report UNLOAD_DONE to MCP */
         if (!nomcp)
@@ -6531,8 +7457,7 @@ error:
         bnx2x_free_mem(bp);
 
         bp->state = BNX2X_STATE_CLOSED;
-        /* Set link down */
-        bp->link_up = 0;
+
         netif_carrier_off(bp->dev);
 
         return 0;
@@ -6568,7 +7493,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
                                           SUPPORTED_100baseT_Half |
                                           SUPPORTED_100baseT_Full |
                                           SUPPORTED_1000baseT_Full |
-                                          SUPPORTED_2500baseT_Full |
+                                          SUPPORTED_2500baseX_Full |
                                           SUPPORTED_TP | SUPPORTED_FIBRE |
                                           SUPPORTED_Autoneg |
                                           SUPPORTED_Pause |
@@ -6581,10 +7506,10 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
 
                         bp->phy_flags |= PHY_SGMII_FLAG;
 
-                        bp->supported |= (/* SUPPORTED_10baseT_Half |
-                                             SUPPORTED_10baseT_Full |
-                                             SUPPORTED_100baseT_Half |
-                                             SUPPORTED_100baseT_Full |*/
+                        bp->supported |= (SUPPORTED_10baseT_Half |
+                                          SUPPORTED_10baseT_Full |
+                                          SUPPORTED_100baseT_Half |
+                                          SUPPORTED_100baseT_Full |
                                           SUPPORTED_1000baseT_Full |
                                           SUPPORTED_TP | SUPPORTED_FIBRE |
                                           SUPPORTED_Autoneg |
@@ -6620,7 +7545,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
                                           SUPPORTED_100baseT_Half |
                                           SUPPORTED_100baseT_Full |
                                           SUPPORTED_1000baseT_Full |
-                                          SUPPORTED_2500baseT_Full |
+                                          SUPPORTED_2500baseX_Full |
                                           SUPPORTED_10000baseT_Full |
                                           SUPPORTED_TP | SUPPORTED_FIBRE |
                                           SUPPORTED_Autoneg |
@@ -6629,12 +7554,46 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
                         break;
 
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+                        BNX2X_DEV_INFO("ext_phy_type 0x%x (8705)\n",
+                                        ext_phy_type);
+
+                        bp->supported |= (SUPPORTED_10000baseT_Full |
+                                          SUPPORTED_FIBRE |
+                                          SUPPORTED_Pause |
+                                          SUPPORTED_Asym_Pause);
+                        break;
+
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
-                        BNX2X_DEV_INFO("ext_phy_type 0x%x (8705/6)\n",
+                        BNX2X_DEV_INFO("ext_phy_type 0x%x (8706)\n",
+                                       ext_phy_type);
+
+                        bp->supported |= (SUPPORTED_10000baseT_Full |
+                                          SUPPORTED_1000baseT_Full |
+                                          SUPPORTED_Autoneg |
+                                          SUPPORTED_FIBRE |
+                                          SUPPORTED_Pause |
+                                          SUPPORTED_Asym_Pause);
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+                        BNX2X_DEV_INFO("ext_phy_type 0x%x (8072)\n",
                                        ext_phy_type);
 
                         bp->supported |= (SUPPORTED_10000baseT_Full |
+                                          SUPPORTED_1000baseT_Full |
                                           SUPPORTED_FIBRE |
+                                          SUPPORTED_Autoneg |
+                                          SUPPORTED_Pause |
+                                          SUPPORTED_Asym_Pause);
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+                        BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n",
+                                       ext_phy_type);
+
+                        bp->supported |= (SUPPORTED_10000baseT_Full |
+                                          SUPPORTED_TP |
+                                          SUPPORTED_Autoneg |
                                           SUPPORTED_Pause |
                                           SUPPORTED_Asym_Pause);
                         break;
@@ -6691,7 +7650,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
                                    SUPPORTED_1000baseT_Full);
 
         if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
-                bp->supported &= ~SUPPORTED_2500baseT_Full;
+                bp->supported &= ~SUPPORTED_2500baseX_Full;
 
         if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G))
                 bp->supported &= ~SUPPORTED_10000baseT_Full;
@@ -6711,13 +7670,8 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
                         bp->req_line_speed = 0;
                         bp->advertising = bp->supported;
                 } else {
-                        u32 ext_phy_type;
-
-                        ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
-                        if ((ext_phy_type ==
-                                PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
-                            (ext_phy_type ==
-                                PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706)) {
+                        if (XGXS_EXT_PHY_TYPE(bp) ==
+                                PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) {
                                 /* force 10G, no AN */
                                 bp->req_line_speed = SPEED_10000;
                                 bp->advertising =
@@ -6734,8 +7688,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
                 break;
 
         case PORT_FEATURE_LINK_SPEED_10M_FULL:
-                if (bp->speed_cap_mask &
-                    PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) {
+                if (bp->supported & SUPPORTED_10baseT_Full) {
                         bp->req_line_speed = SPEED_10;
                         bp->advertising = (ADVERTISED_10baseT_Full |
                                            ADVERTISED_TP);
@@ -6749,8 +7702,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
                 break;
 
         case PORT_FEATURE_LINK_SPEED_10M_HALF:
-                if (bp->speed_cap_mask &
-                    PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) {
+                if (bp->supported & SUPPORTED_10baseT_Half) {
                         bp->req_line_speed = SPEED_10;
                         bp->req_duplex = DUPLEX_HALF;
                         bp->advertising = (ADVERTISED_10baseT_Half |
@@ -6765,8 +7717,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
                 break;
 
         case PORT_FEATURE_LINK_SPEED_100M_FULL:
-                if (bp->speed_cap_mask &
-                    PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) {
+                if (bp->supported & SUPPORTED_100baseT_Full) {
                         bp->req_line_speed = SPEED_100;
                         bp->advertising = (ADVERTISED_100baseT_Full |
                                            ADVERTISED_TP);
@@ -6780,8 +7731,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
                 break;
 
         case PORT_FEATURE_LINK_SPEED_100M_HALF:
-                if (bp->speed_cap_mask &
-                    PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) {
+                if (bp->supported & SUPPORTED_100baseT_Half) {
                         bp->req_line_speed = SPEED_100;
                         bp->req_duplex = DUPLEX_HALF;
                         bp->advertising = (ADVERTISED_100baseT_Half |
@@ -6796,8 +7746,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
                 break;
 
         case PORT_FEATURE_LINK_SPEED_1G:
-                if (bp->speed_cap_mask &
-                    PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) {
+                if (bp->supported & SUPPORTED_1000baseT_Full) {
                         bp->req_line_speed = SPEED_1000;
                         bp->advertising = (ADVERTISED_1000baseT_Full |
                                            ADVERTISED_TP);
@@ -6811,10 +7760,9 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
                 break;
 
         case PORT_FEATURE_LINK_SPEED_2_5G:
-                if (bp->speed_cap_mask &
-                    PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) {
+                if (bp->supported & SUPPORTED_2500baseX_Full) {
                         bp->req_line_speed = SPEED_2500;
-                        bp->advertising = (ADVERTISED_2500baseT_Full |
+                        bp->advertising = (ADVERTISED_2500baseX_Full |
                                            ADVERTISED_TP);
                 } else {
                         BNX2X_ERR("NVRAM config error. "
@@ -6828,15 +7776,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
         case PORT_FEATURE_LINK_SPEED_10G_CX4:
         case PORT_FEATURE_LINK_SPEED_10G_KX4:
         case PORT_FEATURE_LINK_SPEED_10G_KR:
-                if (!(bp->phy_flags & PHY_XGXS_FLAG)) {
-                        BNX2X_ERR("NVRAM config error. "
-                                  "Invalid link_config 0x%x"
-                                  "  phy_flags 0x%x\n",
-                                  bp->link_config, bp->phy_flags);
-                        return;
-                }
-                if (bp->speed_cap_mask &
-                    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
+                if (bp->supported & SUPPORTED_10000baseT_Full) {
                         bp->req_line_speed = SPEED_10000;
                         bp->advertising = (ADVERTISED_10000baseT_Full |
                                            ADVERTISED_FIBRE);
@@ -6863,43 +7803,13 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
 
         bp->req_flow_ctrl = (bp->link_config &
                              PORT_FEATURE_FLOW_CONTROL_MASK);
-        /* Please refer to Table 28B-3 of the 802.3ab-1999 spec */
-        switch (bp->req_flow_ctrl) {
-        case FLOW_CTRL_AUTO:
+        if ((bp->req_flow_ctrl == FLOW_CTRL_AUTO) &&
+            (bp->supported & SUPPORTED_Autoneg))
                 bp->req_autoneg |= AUTONEG_FLOW_CTRL;
-                if (bp->dev->mtu <= 4500) {
-                        bp->pause_mode = PAUSE_BOTH;
-                        bp->advertising |= (ADVERTISED_Pause |
-                                            ADVERTISED_Asym_Pause);
-                } else {
-                        bp->pause_mode = PAUSE_ASYMMETRIC;
-                        bp->advertising |= ADVERTISED_Asym_Pause;
-                }
-                break;
-
-        case FLOW_CTRL_TX:
-                bp->pause_mode = PAUSE_ASYMMETRIC;
-                bp->advertising |= ADVERTISED_Asym_Pause;
-                break;
-
-        case FLOW_CTRL_RX:
-        case FLOW_CTRL_BOTH:
-                bp->pause_mode = PAUSE_BOTH;
-                bp->advertising |= (ADVERTISED_Pause |
-                                    ADVERTISED_Asym_Pause);
-                break;
 
-        case FLOW_CTRL_NONE:
-        default:
-                bp->pause_mode = PAUSE_NONE;
-                bp->advertising &= ~(ADVERTISED_Pause |
-                                     ADVERTISED_Asym_Pause);
-                break;
-        }
-        BNX2X_DEV_INFO("req_autoneg 0x%x  req_flow_ctrl 0x%x\n"
-             KERN_INFO "  pause_mode %d  advertising 0x%x\n",
-                       bp->req_autoneg, bp->req_flow_ctrl,
-                       bp->pause_mode, bp->advertising);
+        BNX2X_DEV_INFO("req_autoneg 0x%x  req_flow_ctrl 0x%x"
+                       "  advertising 0x%x\n",
+                       bp->req_autoneg, bp->req_flow_ctrl, bp->advertising);
 }
 
 static void bnx2x_get_hwinfo(struct bnx2x *bp)
@@ -6933,15 +7843,15 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
         val = SHMEM_RD(bp, validity_map[port]);
         if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
                 != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
-                BNX2X_ERR("MCP validity signature bad\n");
+                BNX2X_ERR("BAD MCP validity signature\n");
 
-        bp->fw_seq = (SHMEM_RD(bp, drv_fw_mb[port].drv_mb_header) &
+        bp->fw_seq = (SHMEM_RD(bp, func_mb[port].drv_mb_header) &
                       DRV_MSG_SEQ_NUMBER_MASK);
 
         bp->hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config);
-
+        bp->board = SHMEM_RD(bp, dev_info.shared_hw_config.board);
         bp->serdes_config =
-                SHMEM_RD(bp, dev_info.port_hw_config[bp->port].serdes_config);
+                SHMEM_RD(bp, dev_info.port_hw_config[port].serdes_config);
         bp->lane_config =
                 SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
         bp->ext_phy_config =
@@ -6954,13 +7864,13 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
         bp->link_config =
                 SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
 
-        BNX2X_DEV_INFO("hw_config (%08x)  serdes_config (%08x)\n"
+        BNX2X_DEV_INFO("hw_config (%08x) board (%08x)  serdes_config (%08x)\n"
              KERN_INFO "  lane_config (%08x)  ext_phy_config (%08x)\n"
              KERN_INFO "  speed_cap_mask (%08x)  link_config (%08x)"
                        "  fw_seq (%08x)\n",
-                       bp->hw_config, bp->serdes_config, bp->lane_config,
-                       bp->ext_phy_config, bp->speed_cap_mask,
-                       bp->link_config, bp->fw_seq);
+                       bp->hw_config, bp->board, bp->serdes_config,
+                       bp->lane_config, bp->ext_phy_config,
+                       bp->speed_cap_mask, bp->link_config, bp->fw_seq);
 
         switch_cfg = (bp->link_config & PORT_FEATURE_CONNECTED_SWITCH_MASK);
         bnx2x_link_settings_supported(bp, switch_cfg);
@@ -7014,14 +7924,8 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
         return;
 
 set_mac: /* only supposed to happen on emulation/FPGA */
-        BNX2X_ERR("warning constant MAC workaround active\n");
-        bp->dev->dev_addr[0] = 0;
-        bp->dev->dev_addr[1] = 0x50;
-        bp->dev->dev_addr[2] = 0xc2;
-        bp->dev->dev_addr[3] = 0x2c;
-        bp->dev->dev_addr[4] = 0x71;
-        bp->dev->dev_addr[5] = port ? 0x0d : 0x0e;
-
+        BNX2X_ERR("warning rendom MAC workaround active\n");
+        random_ether_addr(bp->dev->dev_addr);
         memcpy(bp->dev->perm_addr, bp->dev->dev_addr, 6);
 
 }
@@ -7048,19 +7952,34 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
         }
 
         if (bp->phy_flags & PHY_XGXS_FLAG) {
-                cmd->port = PORT_FIBRE;
-        } else {
+                u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+
+                switch (ext_phy_type) {
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+                        cmd->port = PORT_FIBRE;
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+                        cmd->port = PORT_TP;
+                        break;
+
+                default:
+                        DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
+                           bp->ext_phy_config);
+                }
+        } else
                 cmd->port = PORT_TP;
-        }
 
         cmd->phy_address = bp->phy_addr;
         cmd->transceiver = XCVR_INTERNAL;
 
-        if (bp->req_autoneg & AUTONEG_SPEED) {
+        if (bp->req_autoneg & AUTONEG_SPEED)
                 cmd->autoneg = AUTONEG_ENABLE;
-        } else {
+        else
                 cmd->autoneg = AUTONEG_DISABLE;
-        }
 
         cmd->maxtxpkt = 0;
         cmd->maxrxpkt = 0;
@@ -7091,8 +8010,10 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
         switch (cmd->port) {
         case PORT_TP:
-                if (!(bp->supported & SUPPORTED_TP))
+                if (!(bp->supported & SUPPORTED_TP)) {
+                        DP(NETIF_MSG_LINK, "TP not supported\n");
                         return -EINVAL;
+                }
 
                 if (bp->phy_flags & PHY_XGXS_FLAG) {
                         bnx2x_link_reset(bp);
@@ -7102,8 +8023,10 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
                 break;
 
         case PORT_FIBRE:
-                if (!(bp->supported & SUPPORTED_FIBRE))
+                if (!(bp->supported & SUPPORTED_FIBRE)) {
+                        DP(NETIF_MSG_LINK, "FIBRE not supported\n");
                         return -EINVAL;
+                }
 
                 if (!(bp->phy_flags & PHY_XGXS_FLAG)) {
                         bnx2x_link_reset(bp);
@@ -7113,12 +8036,15 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
                 break;
 
         default:
+                DP(NETIF_MSG_LINK, "Unknown port type\n");
                 return -EINVAL;
         }
 
         if (cmd->autoneg == AUTONEG_ENABLE) {
-                if (!(bp->supported & SUPPORTED_Autoneg))
+                if (!(bp->supported & SUPPORTED_Autoneg)) {
+                        DP(NETIF_MSG_LINK, "Aotoneg not supported\n");
                         return -EINVAL;
+                }
 
                 /* advertise the requested speed and duplex if supported */
                 cmd->advertising &= bp->supported;
@@ -7133,14 +8059,22 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
                 switch (cmd->speed) {
                 case SPEED_10:
                         if (cmd->duplex == DUPLEX_FULL) {
-                                if (!(bp->supported & SUPPORTED_10baseT_Full))
+                                if (!(bp->supported &
+                                      SUPPORTED_10baseT_Full)) {
+                                        DP(NETIF_MSG_LINK,
+                                           "10M full not supported\n");
                                         return -EINVAL;
+                                }
 
                                 advertising = (ADVERTISED_10baseT_Full |
                                                ADVERTISED_TP);
                         } else {
-                                if (!(bp->supported & SUPPORTED_10baseT_Half))
+                                if (!(bp->supported &
+                                      SUPPORTED_10baseT_Half)) {
+                                        DP(NETIF_MSG_LINK,
+                                           "10M half not supported\n");
                                         return -EINVAL;
+                                }
 
                                 advertising = (ADVERTISED_10baseT_Half |
                                                ADVERTISED_TP);
@@ -7150,15 +8084,21 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
                 case SPEED_100:
                         if (cmd->duplex == DUPLEX_FULL) {
                                 if (!(bp->supported &
-                                                SUPPORTED_100baseT_Full))
+                                                SUPPORTED_100baseT_Full)) {
+                                        DP(NETIF_MSG_LINK,
+                                           "100M full not supported\n");
                                         return -EINVAL;
+                                }
 
                                 advertising = (ADVERTISED_100baseT_Full |
                                                ADVERTISED_TP);
                         } else {
                                 if (!(bp->supported &
-                                                SUPPORTED_100baseT_Half))
+                                                SUPPORTED_100baseT_Half)) {
+                                        DP(NETIF_MSG_LINK,
+                                           "100M half not supported\n");
                                         return -EINVAL;
+                                }
 
                                 advertising = (ADVERTISED_100baseT_Half |
                                                ADVERTISED_TP);
@@ -7166,39 +8106,54 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
                         break;
 
                 case SPEED_1000:
-                        if (cmd->duplex != DUPLEX_FULL)
+                        if (cmd->duplex != DUPLEX_FULL) {
+                                DP(NETIF_MSG_LINK, "1G half not supported\n");
                                 return -EINVAL;
+                        }
 
-                        if (!(bp->supported & SUPPORTED_1000baseT_Full))
+                        if (!(bp->supported & SUPPORTED_1000baseT_Full)) {
+                                DP(NETIF_MSG_LINK, "1G full not supported\n");
                                 return -EINVAL;
+                        }
 
                         advertising = (ADVERTISED_1000baseT_Full |
                                        ADVERTISED_TP);
                         break;
 
                 case SPEED_2500:
-                        if (cmd->duplex != DUPLEX_FULL)
+                        if (cmd->duplex != DUPLEX_FULL) {
+                                DP(NETIF_MSG_LINK,
+                                   "2.5G half not supported\n");
                                 return -EINVAL;
+                        }
 
-                        if (!(bp->supported & SUPPORTED_2500baseT_Full))
+                        if (!(bp->supported & SUPPORTED_2500baseX_Full)) {
+                                DP(NETIF_MSG_LINK,
+                                   "2.5G full not supported\n");
                                 return -EINVAL;
+                        }
 
-                        advertising = (ADVERTISED_2500baseT_Full |
+                        advertising = (ADVERTISED_2500baseX_Full |
                                        ADVERTISED_TP);
                         break;
 
                 case SPEED_10000:
-                        if (cmd->duplex != DUPLEX_FULL)
+                        if (cmd->duplex != DUPLEX_FULL) {
+                                DP(NETIF_MSG_LINK, "10G half not supported\n");
                                 return -EINVAL;
+                        }
 
-                        if (!(bp->supported & SUPPORTED_10000baseT_Full))
+                        if (!(bp->supported & SUPPORTED_10000baseT_Full)) {
+                                DP(NETIF_MSG_LINK, "10G full not supported\n");
                                 return -EINVAL;
+                        }
 
                         advertising = (ADVERTISED_10000baseT_Full |
                                        ADVERTISED_FIBRE);
                         break;
 
                 default:
+                        DP(NETIF_MSG_LINK, "Unsupported speed\n");
                         return -EINVAL;
                 }
 
@@ -7398,8 +8353,7 @@ static void bnx2x_disable_nvram_access(struct bnx2x *bp)
 static int bnx2x_nvram_read_dword(struct bnx2x *bp, u32 offset, u32 *ret_val,
                                   u32 cmd_flags)
 {
-        int rc;
-        int count, i;
+        int count, i, rc;
         u32 val;
 
         /* build the command word */
@@ -7452,13 +8406,13 @@ static int bnx2x_nvram_read(struct bnx2x *bp, u32 offset, u8 *ret_buf,
 
         if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) {
                 DP(NETIF_MSG_NVM,
-                   "Invalid paramter: offset 0x%x  buf_size 0x%x\n",
+                   "Invalid parameter: offset 0x%x  buf_size 0x%x\n",
                    offset, buf_size);
                 return -EINVAL;
         }
 
         if (offset + buf_size > bp->flash_size) {
-                DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +"
+                DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +"
                                   " buf_size (0x%x) > flash_size (0x%x)\n",
                    offset, buf_size, bp->flash_size);
                 return -EINVAL;
@@ -7519,8 +8473,7 @@ static int bnx2x_get_eeprom(struct net_device *dev,
 static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val,
                                    u32 cmd_flags)
 {
-        int rc;
-        int count, i;
+        int count, i, rc;
 
         /* build the command word */
         cmd_flags |= MCPR_NVM_COMMAND_DOIT | MCPR_NVM_COMMAND_WR;
@@ -7557,7 +8510,7 @@ static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val,
         return rc;
 }
 
-#define BYTE_OFFSET(offset)             (8 * (offset & 0x03))
+#define BYTE_OFFSET(offset)             (8 * (offset & 0x03))
 
 static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf,
                               int buf_size)
@@ -7568,7 +8521,7 @@ static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf,
         u32 val;
 
         if (offset + buf_size > bp->flash_size) {
-                DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +"
+                DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +"
                                   " buf_size (0x%x) > flash_size (0x%x)\n",
                    offset, buf_size, bp->flash_size);
                 return -EINVAL;
@@ -7621,13 +8574,13 @@ static int bnx2x_nvram_write(struct bnx2x *bp, u32 offset, u8 *data_buf,
 
         if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) {
                 DP(NETIF_MSG_NVM,
-                   "Invalid paramter: offset 0x%x  buf_size 0x%x\n",
+                   "Invalid parameter: offset 0x%x  buf_size 0x%x\n",
                    offset, buf_size);
                 return -EINVAL;
         }
 
         if (offset + buf_size > bp->flash_size) {
-                DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +"
+                DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +"
                                   " buf_size (0x%x) > flash_size (0x%x)\n",
                    offset, buf_size, bp->flash_size);
                 return -EINVAL;
@@ -7788,52 +8741,29 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
            DP_LEVEL "  autoneg %d  rx_pause %d  tx_pause %d\n",
            epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause);
 
-        bp->req_flow_ctrl = FLOW_CTRL_AUTO;
         if (epause->autoneg) {
-                bp->req_autoneg |= AUTONEG_FLOW_CTRL;
-                if (bp->dev->mtu <= 4500) {
-                        bp->pause_mode = PAUSE_BOTH;
-                        bp->advertising |= (ADVERTISED_Pause |
-                                            ADVERTISED_Asym_Pause);
-                } else {
-                        bp->pause_mode = PAUSE_ASYMMETRIC;
-                        bp->advertising |= ADVERTISED_Asym_Pause;
+                if (!(bp->supported & SUPPORTED_Autoneg)) {
+                        DP(NETIF_MSG_LINK, "Aotoneg not supported\n");
+                        return -EINVAL;
                 }
 
-        } else {
+                bp->req_autoneg |= AUTONEG_FLOW_CTRL;
+        } else
                 bp->req_autoneg &= ~AUTONEG_FLOW_CTRL;
 
-                if (epause->rx_pause)
-                        bp->req_flow_ctrl |= FLOW_CTRL_RX;
-                if (epause->tx_pause)
-                        bp->req_flow_ctrl |= FLOW_CTRL_TX;
-
-                switch (bp->req_flow_ctrl) {
-                case FLOW_CTRL_AUTO:
-                        bp->req_flow_ctrl = FLOW_CTRL_NONE;
-                        bp->pause_mode = PAUSE_NONE;
-                        bp->advertising &= ~(ADVERTISED_Pause |
-                                             ADVERTISED_Asym_Pause);
-                        break;
+        bp->req_flow_ctrl = FLOW_CTRL_AUTO;
 
-                case FLOW_CTRL_TX:
-                        bp->pause_mode = PAUSE_ASYMMETRIC;
-                        bp->advertising |= ADVERTISED_Asym_Pause;
-                        break;
+        if (epause->rx_pause)
+                bp->req_flow_ctrl |= FLOW_CTRL_RX;
+        if (epause->tx_pause)
+                bp->req_flow_ctrl |= FLOW_CTRL_TX;
 
-                case FLOW_CTRL_RX:
-                case FLOW_CTRL_BOTH:
-                        bp->pause_mode = PAUSE_BOTH;
-                        bp->advertising |= (ADVERTISED_Pause |
-                                            ADVERTISED_Asym_Pause);
-                        break;
-                }
-        }
+        if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) &&
+            (bp->req_flow_ctrl == FLOW_CTRL_AUTO))
+                bp->req_flow_ctrl = FLOW_CTRL_NONE;
 
-        DP(NETIF_MSG_LINK, "req_autoneg 0x%x  req_flow_ctrl 0x%x\n"
-           DP_LEVEL "  pause_mode %d  advertising 0x%x\n",
-           bp->req_autoneg, bp->req_flow_ctrl, bp->pause_mode,
-           bp->advertising);
+        DP(NETIF_MSG_LINK, "req_autoneg 0x%x  req_flow_ctrl 0x%x\n",
+           bp->req_autoneg, bp->req_flow_ctrl);
 
         bnx2x_stop_stats(bp);
         bnx2x_link_initialize(bp);
@@ -7906,81 +8836,87 @@ static void bnx2x_self_test(struct net_device *dev,
 static struct {
         char string[ETH_GSTRING_LEN];
 } bnx2x_stats_str_arr[BNX2X_NUM_STATS] = {
-        { "rx_bytes"},                           /*  0 */
-        { "rx_error_bytes"},                     /*  1 */
-        { "tx_bytes"},                           /*  2 */
-        { "tx_error_bytes"},                     /*  3 */
-        { "rx_ucast_packets"},                   /*  4 */
-        { "rx_mcast_packets"},                   /*  5 */
-        { "rx_bcast_packets"},                   /*  6 */
-        { "tx_ucast_packets"},                   /*  7 */
-        { "tx_mcast_packets"},                   /*  8 */
-        { "tx_bcast_packets"},                   /*  9 */
-        { "tx_mac_errors"},                      /* 10 */
-        { "tx_carrier_errors"},                  /* 11 */
-        { "rx_crc_errors"},                      /* 12 */
-        { "rx_align_errors"},                    /* 13 */
-        { "tx_single_collisions"},               /* 14 */
-        { "tx_multi_collisions"},                /* 15 */
-        { "tx_deferred"},                        /* 16 */
-        { "tx_excess_collisions"},               /* 17 */
-        { "tx_late_collisions"},                 /* 18 */
-        { "tx_total_collisions"},                /* 19 */
-        { "rx_fragments"},                       /* 20 */
-        { "rx_jabbers"},                         /* 21 */
-        { "rx_undersize_packets"},               /* 22 */
-        { "rx_oversize_packets"},                /* 23 */
-        { "rx_xon_frames"},                      /* 24 */
-        { "rx_xoff_frames"},                     /* 25 */
-        { "tx_xon_frames"},                      /* 26 */
-        { "tx_xoff_frames"},                     /* 27 */
-        { "rx_mac_ctrl_frames"},                 /* 28 */
-        { "rx_filtered_packets"},                /* 29 */
-        { "rx_discards"},                        /* 30 */
+        { "rx_bytes"},
+        { "rx_error_bytes"},
+        { "tx_bytes"},
+        { "tx_error_bytes"},
+        { "rx_ucast_packets"},
+        { "rx_mcast_packets"},
+        { "rx_bcast_packets"},
+        { "tx_ucast_packets"},
+        { "tx_mcast_packets"},
+        { "tx_bcast_packets"},
+        { "tx_mac_errors"},     /* 10 */
+        { "tx_carrier_errors"},
+        { "rx_crc_errors"},
+        { "rx_align_errors"},
+        { "tx_single_collisions"},
+        { "tx_multi_collisions"},
+        { "tx_deferred"},
+        { "tx_excess_collisions"},
+        { "tx_late_collisions"},
+        { "tx_total_collisions"},
+        { "rx_fragments"},      /* 20 */
+        { "rx_jabbers"},
+        { "rx_undersize_packets"},
+        { "rx_oversize_packets"},
+        { "rx_xon_frames"},
+        { "rx_xoff_frames"},
+        { "tx_xon_frames"},
+        { "tx_xoff_frames"},
+        { "rx_mac_ctrl_frames"},
+        { "rx_filtered_packets"},
+        { "rx_discards"},       /* 30 */
+        { "brb_discard"},
+        { "brb_truncate"},
+        { "xxoverflow"}
 };
 
 #define STATS_OFFSET32(offset_name) \
         (offsetof(struct bnx2x_eth_stats, offset_name) / 4)
 
 static unsigned long bnx2x_stats_offset_arr[BNX2X_NUM_STATS] = {
-        STATS_OFFSET32(total_bytes_received_hi),                     /*  0 */
-        STATS_OFFSET32(stat_IfHCInBadOctets_hi),                     /*  1 */
-        STATS_OFFSET32(total_bytes_transmitted_hi),                  /*  2 */
-        STATS_OFFSET32(stat_IfHCOutBadOctets_hi),                    /*  3 */
-        STATS_OFFSET32(total_unicast_packets_received_hi),           /*  4 */
-        STATS_OFFSET32(total_multicast_packets_received_hi),         /*  5 */
-        STATS_OFFSET32(total_broadcast_packets_received_hi),         /*  6 */
-        STATS_OFFSET32(total_unicast_packets_transmitted_hi),        /*  7 */
-        STATS_OFFSET32(total_multicast_packets_transmitted_hi),      /*  8 */
-        STATS_OFFSET32(total_broadcast_packets_transmitted_hi),      /*  9 */
-        STATS_OFFSET32(stat_Dot3statsInternalMacTransmitErrors),     /* 10 */
-        STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors),            /* 11 */
-        STATS_OFFSET32(crc_receive_errors),                          /* 12 */
-        STATS_OFFSET32(alignment_errors),                            /* 13 */
-        STATS_OFFSET32(single_collision_transmit_frames),            /* 14 */
-        STATS_OFFSET32(multiple_collision_transmit_frames),          /* 15 */
-        STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions),         /* 16 */
-        STATS_OFFSET32(excessive_collision_frames),                  /* 17 */
-        STATS_OFFSET32(late_collision_frames),                       /* 18 */
-        STATS_OFFSET32(number_of_bugs_found_in_stats_spec),          /* 19 */
-        STATS_OFFSET32(runt_packets_received),                       /* 20 */
-        STATS_OFFSET32(jabber_packets_received),                     /* 21 */
-        STATS_OFFSET32(error_runt_packets_received),                 /* 22 */
-        STATS_OFFSET32(error_jabber_packets_received),               /* 23 */
-        STATS_OFFSET32(pause_xon_frames_received),                   /* 24 */
-        STATS_OFFSET32(pause_xoff_frames_received),                  /* 25 */
-        STATS_OFFSET32(pause_xon_frames_transmitted),                /* 26 */
-        STATS_OFFSET32(pause_xoff_frames_transmitted),               /* 27 */
-        STATS_OFFSET32(control_frames_received),                     /* 28 */
-        STATS_OFFSET32(mac_filter_discard),                          /* 29 */
-        STATS_OFFSET32(no_buff_discard),                             /* 30 */
+        STATS_OFFSET32(total_bytes_received_hi),
+        STATS_OFFSET32(stat_IfHCInBadOctets_hi),
+        STATS_OFFSET32(total_bytes_transmitted_hi),
+        STATS_OFFSET32(stat_IfHCOutBadOctets_hi),
+        STATS_OFFSET32(total_unicast_packets_received_hi),
+        STATS_OFFSET32(total_multicast_packets_received_hi),
+        STATS_OFFSET32(total_broadcast_packets_received_hi),
+        STATS_OFFSET32(total_unicast_packets_transmitted_hi),
+        STATS_OFFSET32(total_multicast_packets_transmitted_hi),
+        STATS_OFFSET32(total_broadcast_packets_transmitted_hi),
+        STATS_OFFSET32(stat_Dot3statsInternalMacTransmitErrors), /* 10 */
+        STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors),
+        STATS_OFFSET32(crc_receive_errors),
+        STATS_OFFSET32(alignment_errors),
+        STATS_OFFSET32(single_collision_transmit_frames),
+        STATS_OFFSET32(multiple_collision_transmit_frames),
+        STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions),
+        STATS_OFFSET32(excessive_collision_frames),
+        STATS_OFFSET32(late_collision_frames),
+        STATS_OFFSET32(number_of_bugs_found_in_stats_spec),
+        STATS_OFFSET32(runt_packets_received),                  /* 20 */
+        STATS_OFFSET32(jabber_packets_received),
+        STATS_OFFSET32(error_runt_packets_received),
+        STATS_OFFSET32(error_jabber_packets_received),
+        STATS_OFFSET32(pause_xon_frames_received),
+        STATS_OFFSET32(pause_xoff_frames_received),
+        STATS_OFFSET32(pause_xon_frames_transmitted),
+        STATS_OFFSET32(pause_xoff_frames_transmitted),
+        STATS_OFFSET32(control_frames_received),
+        STATS_OFFSET32(mac_filter_discard),
+        STATS_OFFSET32(no_buff_discard),                        /* 30 */
+        STATS_OFFSET32(brb_discard),
+        STATS_OFFSET32(brb_truncate_discard),
+        STATS_OFFSET32(xxoverflow_discard)
 };
 
 static u8 bnx2x_stats_len_arr[BNX2X_NUM_STATS] = {
         8, 0, 8, 0, 8, 8, 8, 8, 8, 8,
         4, 0, 4, 4, 4, 4, 4, 4, 4, 4,
         4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
-        4,
+        4, 4, 4, 4
 };
 
 static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
@@ -8138,9 +9074,7 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state)
  * net_device service functions
  */
 
-/* Called with rtnl_lock from vlan functions and also netif_tx_lock
- * from set_multicast.
- */
+/* called with netif_tx_lock from set_multicast */
 static void bnx2x_set_rx_mode(struct net_device *dev)
 {
         struct bnx2x *bp = netdev_priv(dev);
@@ -8314,7 +9248,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
                                ETH_TX_BD_ETH_ADDR_TYPE_SHIFT);
         tx_bd->general_data |= 1; /* header nbd */
 
-        /* remeber the first bd of the packet */
+        /* remember the first bd of the packet */
         tx_buf->first_bd = bd_prod;
 
         DP(NETIF_MSG_TX_QUEUED,
@@ -8334,7 +9268,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
                 /* for now NS flag is not used in Linux */
                 pbd->global_data = (len |
-                                    ((skb->protocol == ETH_P_8021Q) <<
+                                    ((skb->protocol == ntohs(ETH_P_8021Q)) <<
                                      ETH_TX_PARSE_BD_LLC_SNAP_EN_SHIFT));
                 pbd->ip_hlen = ip_hdrlen(skb) / 2;
                 pbd->total_hlen = cpu_to_le16(len + pbd->ip_hlen);
@@ -8343,7 +9277,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
                         tx_bd->bd_flags.as_bitfield |=
                                                 ETH_TX_BD_FLAGS_TCP_CSUM;
-                        pbd->tcp_flags = htonl(tcp_flag_word(skb)) & 0xFFFF;
+                        pbd->tcp_flags = pbd_tcp_flags(skb);
                         pbd->total_hlen += cpu_to_le16(tcp_hdrlen(skb) / 2);
                         pbd->tcp_pseudo_csum = swab16(th->check);
 
@@ -8387,7 +9321,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
         if (skb_shinfo(skb)->gso_size &&
             (skb->len > (bp->dev->mtu + ETH_HLEN))) {
-                int hlen = 2 * le32_to_cpu(pbd->total_hlen);
+                int hlen = 2 * le16_to_cpu(pbd->total_hlen);
 
                 DP(NETIF_MSG_TX_QUEUED,
                    "TSO packet len %d  hlen %d  total len %d  tso size %d\n",
@@ -8427,7 +9361,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
                         tx_bd->vlan = cpu_to_le16(pkt_prod);
                         /* this marks the bd
                          * as one that has no individual mapping
-                         * the FW ignors this flag in a bd not maked start
+                         * the FW ignores this flag in a bd not marked start
                          */
                         tx_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_SW_LSO;
                         DP(NETIF_MSG_TX_QUEUED,
@@ -8504,9 +9438,11 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
         DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %u  bd %d\n", nbd, bd_prod);
 
-        fp->hw_tx_prods->bds_prod += cpu_to_le16(nbd);
+        fp->hw_tx_prods->bds_prod =
+                cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + nbd);
         mb(); /* FW restriction: must not reorder writing nbd and packets */
-        fp->hw_tx_prods->packets_prod += cpu_to_le32(1);
+        fp->hw_tx_prods->packets_prod =
+                cpu_to_le32(le32_to_cpu(fp->hw_tx_prods->packets_prod) + 1);
         DOORBELL(bp, fp_index, 0);
 
         mmiowb();
@@ -8525,11 +9461,6 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
         return NETDEV_TX_OK;
 }
 
-static struct net_device_stats *bnx2x_get_stats(struct net_device *dev)
-{
-        return &dev->stats;
-}
-
 /* Called with rtnl_lock */
 static int bnx2x_open(struct net_device *dev)
 {
@@ -8543,16 +9474,13 @@ static int bnx2x_open(struct net_device *dev)
 /* Called with rtnl_lock */
 static int bnx2x_close(struct net_device *dev)
 {
-        int rc;
         struct bnx2x *bp = netdev_priv(dev);
 
         /* Unload the driver, release IRQs */
-        rc = bnx2x_nic_unload(bp, 1);
-        if (rc) {
-                BNX2X_ERR("bnx2x_nic_unload failed: %d\n", rc);
-                return rc;
-        }
-        bnx2x_set_power_state(bp, PCI_D3hot);
+        bnx2x_nic_unload(bp, 1);
+
+        if (!CHIP_REV_IS_SLOW(bp))
+                bnx2x_set_power_state(bp, PCI_D3hot);
 
         return 0;
 }
@@ -8584,7 +9512,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
         case SIOCGMIIPHY:
                 data->phy_id = bp->phy_addr;
 
-                /* fallthru */
+                /* fallthrough */
         case SIOCGMIIREG: {
                 u32 mii_regval;
 
@@ -8633,7 +9561,7 @@ static int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
                 return -EINVAL;
 
         /* This does not race with packet allocation
-         * because the actuall alloc size is
+         * because the actual alloc size is
          * only updated as part of load
          */
         dev->mtu = new_mtu;
@@ -8666,7 +9594,7 @@ static void bnx2x_vlan_rx_register(struct net_device *dev,
 
         bp->vlgrp = vlgrp;
         if (netif_running(dev))
-                bnx2x_set_rx_mode(dev);
+                bnx2x_set_client_config(bp);
 }
 #endif
 
@@ -8695,14 +9623,18 @@ static void bnx2x_reset_task(struct work_struct *work)
         if (!netif_running(bp->dev))
                 return;
 
-        bp->in_reset_task = 1;
+        rtnl_lock();
 
-        bnx2x_netif_stop(bp);
+        if (bp->state != BNX2X_STATE_OPEN) {
+                DP(NETIF_MSG_TX_ERR, "state is %x, returning\n", bp->state);
+                goto reset_task_exit;
+        }
 
         bnx2x_nic_unload(bp, 0);
         bnx2x_nic_load(bp, 0);
 
-        bp->in_reset_task = 0;
+reset_task_exit:
+        rtnl_unlock();
 }
 
 static int __devinit bnx2x_init_board(struct pci_dev *pdev,
@@ -8783,8 +9715,6 @@ static int __devinit bnx2x_init_board(struct pci_dev *pdev,
 
         spin_lock_init(&bp->phy_lock);
 
-        bp->in_reset_task = 0;
-
         INIT_WORK(&bp->reset_task, bnx2x_reset_task);
         INIT_WORK(&bp->sp_task, bnx2x_sp_task);
 
@@ -8813,7 +9743,7 @@ static int __devinit bnx2x_init_board(struct pci_dev *pdev,
         bnx2x_get_hwinfo(bp);
 
         if (CHIP_REV(bp) == CHIP_REV_FPGA) {
-                printk(KERN_ERR PFX "FPGA detacted. MCP disabled,"
+                printk(KERN_ERR PFX "FPGA detected. MCP disabled,"
                        " will only init first device\n");
                 onefunc = 1;
                 nomcp = 1;
@@ -8882,14 +9812,32 @@ err_out:
         return rc;
 }
 
+static int __devinit bnx2x_get_pcie_width(struct bnx2x *bp)
+{
+        u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL);
+
+        val = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT;
+        return val;
+}
+
+/* return value of 1=2.5GHz 2=5GHz */
+static int __devinit bnx2x_get_pcie_speed(struct bnx2x *bp)
+{
+        u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL);
+
+        val = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
+        return val;
+}
+
 static int __devinit bnx2x_init_one(struct pci_dev *pdev,
                                     const struct pci_device_id *ent)
 {
         static int version_printed;
         struct net_device *dev = NULL;
         struct bnx2x *bp;
-        int rc, i;
+        int rc;
         int port = PCI_FUNC(pdev->devfn);
+        DECLARE_MAC_BUF(mac);
 
         if (version_printed++ == 0)
                 printk(KERN_INFO "%s", version);
@@ -8906,6 +9854,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 
         if (port && onefunc) {
                 printk(KERN_ERR PFX "second function disabled. exiting\n");
+                free_netdev(dev);
                 return 0;
         }
 
@@ -8918,7 +9867,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
         dev->hard_start_xmit = bnx2x_start_xmit;
         dev->watchdog_timeo = TX_TIMEOUT;
 
-        dev->get_stats = bnx2x_get_stats;
         dev->ethtool_ops = &bnx2x_ethtool_ops;
         dev->open = bnx2x_open;
         dev->stop = bnx2x_close;
@@ -8944,7 +9892,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 
         rc = register_netdev(dev);
         if (rc) {
-                printk(KERN_ERR PFX "Cannot register net device\n");
+                dev_err(&pdev->dev, "Cannot register net device\n");
                 if (bp->regview)
                         iounmap(bp->regview);
                 if (bp->doorbells)
@@ -8959,32 +9907,30 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
         pci_set_drvdata(pdev, dev);
 
         bp->name = board_info[ent->driver_data].name;
-        printk(KERN_INFO "%s: %s (%c%d) PCI%s %s %dMHz "
-               "found at mem %lx, IRQ %d, ",
-               dev->name, bp->name,
+        printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
+               " IRQ %d, ", dev->name, bp->name,
                ((CHIP_ID(bp) & 0xf000) >> 12) + 'A',
                ((CHIP_ID(bp) & 0x0ff0) >> 4),
-               ((bp->flags & PCIX_FLAG) ? "-X" : ""),
-               ((bp->flags & PCI_32BIT_FLAG) ? "32-bit" : "64-bit"),
-               bp->bus_speed_mhz,
-               dev->base_addr,
-               bp->pdev->irq);
-
-        printk("node addr ");
-        for (i = 0; i < 6; i++)
-                printk("%2.2x", dev->dev_addr[i]);
-        printk("\n");
-
+               bnx2x_get_pcie_width(bp),
+               (bnx2x_get_pcie_speed(bp) == 2) ? "5GHz (Gen2)" : "2.5GHz",
+               dev->base_addr, bp->pdev->irq);
+        printk(KERN_CONT "node addr %s\n", print_mac(mac, dev->dev_addr));
         return 0;
 }
 
 static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
 {
         struct net_device *dev = pci_get_drvdata(pdev);
-        struct bnx2x *bp = netdev_priv(dev);
+        struct bnx2x *bp;
+
+        if (!dev) {
+                /* we get here if init_one() fails */
+                printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n");
+                return;
+        }
+
+        bp = netdev_priv(dev);
 
-        flush_scheduled_work();
-        /*tasklet_kill(&bp->sp_task);*/
         unregister_netdev(dev);
 
         if (bp->regview)
@@ -9002,34 +9948,43 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
 static int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state)
 {
         struct net_device *dev = pci_get_drvdata(pdev);
-        struct bnx2x *bp = netdev_priv(dev);
-        int rc;
+        struct bnx2x *bp;
+
+        if (!dev)
+                return 0;
 
         if (!netif_running(dev))
                 return 0;
 
-        rc = bnx2x_nic_unload(bp, 0);
-        if (!rc)
-                return rc;
+        bp = netdev_priv(dev);
+
+        bnx2x_nic_unload(bp, 0);
 
         netif_device_detach(dev);
-        pci_save_state(pdev);
 
+        pci_save_state(pdev);
         bnx2x_set_power_state(bp, pci_choose_state(pdev, state));
+
         return 0;
 }
 
 static int bnx2x_resume(struct pci_dev *pdev)
 {
         struct net_device *dev = pci_get_drvdata(pdev);
-        struct bnx2x *bp = netdev_priv(dev);
+        struct bnx2x *bp;
         int rc;
 
+        if (!dev) {
+                printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n");
+                return -ENODEV;
+        }
+
         if (!netif_running(dev))
                 return 0;
 
-        pci_restore_state(pdev);
+        bp = netdev_priv(dev);
 
+        pci_restore_state(pdev);
         bnx2x_set_power_state(bp, PCI_D0);
         netif_device_attach(dev);
 
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 4f7ae6f77452..4f0c0d31e7c1 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -1,6 +1,6 @@
 /* bnx2x.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -24,6 +24,8 @@
 #define BNX2X_MSG_STATS                 0x20000 /* was: NETIF_MSG_TIMER */
 #define NETIF_MSG_NVM                   0x40000 /* was: NETIF_MSG_HW */
 #define NETIF_MSG_DMAE                  0x80000 /* was: NETIF_MSG_HW */
+#define BNX2X_MSG_SP                    0x100000 /* was: NETIF_MSG_INTR */
+#define BNX2X_MSG_FP                    0x200000 /* was: NETIF_MSG_INTR */
 
 #define DP_LEVEL                        KERN_NOTICE     /* was: KERN_DEBUG */
 
@@ -40,6 +42,12 @@
                 __LINE__, bp->dev?(bp->dev->name):"?", ##__args); \
         } while (0)
 
+/* for logging (never masked) */
+#define BNX2X_LOG(__fmt, __args...) do { \
+        printk(KERN_NOTICE "[%s:%d(%s)]" __fmt, __FUNCTION__, \
+                __LINE__, bp->dev?(bp->dev->name):"?", ##__args); \
+        } while (0)
+
 /* before we have a dev->name use dev_info() */
 #define BNX2X_DEV_INFO(__fmt, __args...) do { \
         if (bp->msglevel & NETIF_MSG_PROBE) \
@@ -423,8 +431,6 @@ struct bnx2x_fastpath {
 #define BNX2X_FP_STATE_OPEN             0xa0000
 #define BNX2X_FP_STATE_HALTING          0xb0000
 #define BNX2X_FP_STATE_HALTED           0xc0000
-#define BNX2X_FP_STATE_DELETED          0xd0000
-#define BNX2X_FP_STATE_CLOSE_IRQ        0xe0000
 
         int                     index;
 
@@ -505,7 +511,6 @@ struct bnx2x {
         struct eth_spe          *spq;
         dma_addr_t              spq_mapping;
         u16                     spq_prod_idx;
-        u16                     dsb_sp_prod_idx;
         struct eth_spe          *spq_prod_bd;
         struct eth_spe          *spq_last_bd;
         u16                     *dsb_sp_prod;
@@ -517,7 +522,7 @@ struct bnx2x {
          */
         u8                      stat_pending;
 
-        /* End of fileds used in the performance code paths */
+        /* End of fields used in the performance code paths */
 
         int                     panic;
         int                     msglevel;
@@ -540,8 +545,6 @@ struct bnx2x {
         spinlock_t              phy_lock;
 
         struct work_struct      reset_task;
-        u16                     in_reset_task;
-
         struct work_struct      sp_task;
 
         struct timer_list       timer;
@@ -555,7 +558,6 @@ struct bnx2x {
 #define CHIP_ID(bp)                     (((bp)->chip_id) & 0xfffffff0)
 
 #define CHIP_NUM(bp)                    (((bp)->chip_id) & 0xffff0000)
-#define CHIP_NUM_5710                   0x57100000
 
 #define CHIP_REV(bp)                    (((bp)->chip_id) & 0x0000f000)
 #define CHIP_REV_Ax                     0x00000000
@@ -574,7 +576,8 @@ struct bnx2x {
         u32                     fw_mb;
 
         u32                     hw_config;
-        u32                     serdes_config;
+        u32                     board;
+        u32                     serdes_config;
         u32                     lane_config;
         u32                     ext_phy_config;
 #define XGXS_EXT_PHY_TYPE(bp)           (bp->ext_phy_config & \
@@ -595,11 +598,11 @@ struct bnx2x {
         u8                      tx_lane_swap;
 
         u8                      link_up;
+        u8                      phy_link_up;
 
         u32                     supported;
 /* link settings - missing defines */
 #define SUPPORTED_2500baseT_Full        (1 << 15)
-#define SUPPORTED_CX4                   (1 << 16)
 
         u32                     phy_flags;
 /*#define PHY_SERDES_FLAG                       0x1*/
@@ -644,16 +647,9 @@ struct bnx2x {
 #define FLOW_CTRL_BOTH                  PORT_FEATURE_FLOW_CONTROL_BOTH
 #define FLOW_CTRL_NONE                  PORT_FEATURE_FLOW_CONTROL_NONE
 
-        u32                     pause_mode;
-#define PAUSE_NONE                      0
-#define PAUSE_SYMMETRIC                 1
-#define PAUSE_ASYMMETRIC                2
-#define PAUSE_BOTH                      3
-
         u32                     advertising;
 /* link settings - missing defines */
 #define ADVERTISED_2500baseT_Full       (1 << 15)
-#define ADVERTISED_CX4                  (1 << 16)
 
         u32                     link_status;
         u32                     line_speed;
@@ -667,6 +663,8 @@ struct bnx2x {
 #define NVRAM_TIMEOUT_COUNT             30000
 #define NVRAM_PAGE_SIZE                 256
 
+        u8                      wol;
+
         int                     rx_ring_size;
 
         u16                     tx_quick_cons_trip_int;
@@ -718,9 +716,6 @@ struct bnx2x {
 #endif
 
         char                    *name;
-        u16                     bus_speed_mhz;
-        u8                      wol;
-        u8                      pad;
 
         /* used to synchronize stats collecting */
         int                     stats_state;
@@ -856,8 +851,8 @@ struct bnx2x {
 #define MAX_SPQ_PENDING                 8
 
 
-#define BNX2X_NUM_STATS                 31
-#define BNX2X_NUM_TESTS                 2
+#define BNX2X_NUM_STATS                 34
+#define BNX2X_NUM_TESTS                 1
 
 
 #define DPM_TRIGER_TYPE                 0x40
@@ -867,6 +862,15 @@ struct bnx2x {
                        DPM_TRIGER_TYPE); \
         } while (0)
 
+/* PCIE link and speed */
+#define PCICFG_LINK_WIDTH               0x1f00000
+#define PCICFG_LINK_WIDTH_SHIFT         20
+#define PCICFG_LINK_SPEED               0xf0000
+#define PCICFG_LINK_SPEED_SHIFT         16
+
+#define BMAC_CONTROL_RX_ENABLE          2
+
+#define pbd_tcp_flags(skb)      (ntohl(tcp_flag_word(tcp_hdr(skb)))>>16 & 0xff)
 
 /* stuff added to make the code fit 80Col */
 
@@ -939,13 +943,13 @@ struct bnx2x {
 #define LINK_16GTFD                     LINK_STATUS_SPEED_AND_DUPLEX_16GTFD
 #define LINK_16GXFD                     LINK_STATUS_SPEED_AND_DUPLEX_16GXFD
 
-#define NIG_STATUS_INTERRUPT_XGXS0_LINK10G \
+#define NIG_STATUS_XGXS0_LINK10G \
                 NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G
-#define NIG_XGXS0_LINK_STATUS \
+#define NIG_STATUS_XGXS0_LINK_STATUS \
                 NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS
-#define NIG_XGXS0_LINK_STATUS_SIZE \
+#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \
                 NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE
-#define NIG_SERDES0_LINK_STATUS \
+#define NIG_STATUS_SERDES0_LINK_STATUS \
                 NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS
 #define NIG_MASK_MI_INT \
                 NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT
diff --git a/drivers/net/bnx2x_fw_defs.h b/drivers/net/bnx2x_fw_defs.h
index 62a6eb81025a..3b968904ca65 100644
--- a/drivers/net/bnx2x_fw_defs.h
+++ b/drivers/net/bnx2x_fw_defs.h
@@ -1,6 +1,6 @@
 /* bnx2x_fw_defs.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index 6fd959c34d1f..b21075ccb52e 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -1,6 +1,6 @@
 /* bnx2x_hsi.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -8,169 +8,9 @@
  */
 
 
-#define FUNC_0                          0
-#define FUNC_1                          1
-#define FUNC_MAX                        2
-
-
-/* This value (in milliseconds) determines the frequency of the driver
- * issuing the PULSE message code.  The firmware monitors this periodic
- * pulse to determine when to switch to an OS-absent mode. */
-#define DRV_PULSE_PERIOD_MS             250
-
-/* This value (in milliseconds) determines how long the driver should
- * wait for an acknowledgement from the firmware before timing out.  Once
- * the firmware has timed out, the driver will assume there is no firmware
- * running and there won't be any firmware-driver synchronization during a
- * driver reset. */
-#define FW_ACK_TIME_OUT_MS              5000
-
-#define FW_ACK_POLL_TIME_MS             1
-
-#define FW_ACK_NUM_OF_POLL      (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS)
-
-/* LED Blink rate that will achieve ~15.9Hz */
-#define LED_BLINK_RATE_VAL              480
-
-/****************************************************************************
- * Driver <-> FW Mailbox                                                    *
- ****************************************************************************/
-struct drv_fw_mb {
-        u32 drv_mb_header;
-#define DRV_MSG_CODE_MASK                       0xffff0000
-#define DRV_MSG_CODE_LOAD_REQ                   0x10000000
-#define DRV_MSG_CODE_LOAD_DONE                  0x11000000
-#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN          0x20000000
-#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS         0x20010000
-#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP         0x20020000
-#define DRV_MSG_CODE_UNLOAD_DONE                0x21000000
-#define DRV_MSG_CODE_DIAG_ENTER_REQ             0x50000000
-#define DRV_MSG_CODE_DIAG_EXIT_REQ              0x60000000
-#define DRV_MSG_CODE_VALIDATE_KEY               0x70000000
-#define DRV_MSG_CODE_GET_CURR_KEY               0x80000000
-#define DRV_MSG_CODE_GET_UPGRADE_KEY            0x81000000
-#define DRV_MSG_CODE_GET_MANUF_KEY              0x82000000
-#define DRV_MSG_CODE_LOAD_L2B_PRAM              0x90000000
-
-#define DRV_MSG_SEQ_NUMBER_MASK                 0x0000ffff
-
-        u32 drv_mb_param;
-
-        u32 fw_mb_header;
-#define FW_MSG_CODE_MASK                        0xffff0000
-#define FW_MSG_CODE_DRV_LOAD_COMMON             0x11000000
-#define FW_MSG_CODE_DRV_LOAD_PORT               0x12000000
-#define FW_MSG_CODE_DRV_LOAD_REFUSED            0x13000000
-#define FW_MSG_CODE_DRV_LOAD_DONE               0x14000000
-#define FW_MSG_CODE_DRV_UNLOAD_COMMON           0x21000000
-#define FW_MSG_CODE_DRV_UNLOAD_PORT             0x22000000
-#define FW_MSG_CODE_DRV_UNLOAD_DONE             0x23000000
-#define FW_MSG_CODE_DIAG_ENTER_DONE             0x50000000
-#define FW_MSG_CODE_DIAG_REFUSE                 0x51000000
-#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS        0x70000000
-#define FW_MSG_CODE_VALIDATE_KEY_FAILURE        0x71000000
-#define FW_MSG_CODE_GET_KEY_DONE                0x80000000
-#define FW_MSG_CODE_NO_KEY                      0x8f000000
-#define FW_MSG_CODE_LIC_INFO_NOT_READY          0x8f800000
-#define FW_MSG_CODE_L2B_PRAM_LOADED             0x90000000
-#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE     0x91000000
-#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE     0x92000000
-#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE     0x93000000
-#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE     0x94000000
-
-#define FW_MSG_SEQ_NUMBER_MASK                  0x0000ffff
-
-        u32 fw_mb_param;
-
-        u32 link_status;
-        /* Driver should update this field on any link change event */
-
-#define LINK_STATUS_LINK_FLAG_MASK              0x00000001
-#define LINK_STATUS_LINK_UP                     0x00000001
-#define LINK_STATUS_SPEED_AND_DUPLEX_MASK       0x0000001E
-#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE    (0<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10THD              (1<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD              (2<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD            (3<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_100T4              (4<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD            (5<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD            (6<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD            (7<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD            (7<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD            (8<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD            (9<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD            (9<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD             (10<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD             (10<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD             (11<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD             (11<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD           (12<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD           (12<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD             (13<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD             (13<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD             (14<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD             (14<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD             (15<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD             (15<<1)
-
-#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK            0x00000020
-#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED              0x00000020
-
-#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE             0x00000040
-#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK        0x00000080
-#define LINK_STATUS_PARALLEL_DETECTION_USED             0x00000080
-
-#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE        0x00000200
-#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE        0x00000400
-#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE          0x00000800
-#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE        0x00001000
-#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE        0x00002000
-#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE          0x00004000
-#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE          0x00008000
-
-#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK           0x00010000
-#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED             0x00010000
-
-#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK           0x00020000
-#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED             0x00020000
-
-#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK      0x000C0000
-#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE      (0<<18)
-#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE        (1<<18)
-#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE       (2<<18)
-#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE             (3<<18)
-
-#define LINK_STATUS_SERDES_LINK                         0x00100000
-
-#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE        0x00200000
-#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE        0x00400000
-#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE         0x00800000
-#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE         0x01000000
-#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE       0x02000000
-#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE         0x04000000
-#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE         0x08000000
-#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE         0x10000000
-
-        u32 drv_pulse_mb;
-#define DRV_PULSE_SEQ_MASK                              0x00007fff
-#define DRV_PULSE_SYSTEM_TIME_MASK                      0xffff0000
-        /* The system time is in the format of
-         * (year-2001)*12*32 + month*32 + day. */
-#define DRV_PULSE_ALWAYS_ALIVE                          0x00008000
-        /* Indicate to the firmware not to go into the
-         * OS-absent when it is not getting driver pulse.
-         * This is used for debugging as well for PXE(MBA). */
-
-        u32 mcp_pulse_mb;
-#define MCP_PULSE_SEQ_MASK                              0x00007fff
-#define MCP_PULSE_ALWAYS_ALIVE                          0x00008000
-        /* Indicates to the driver not to assert due to lack
-         * of MCP response */
-#define MCP_EVENT_MASK                                  0xffff0000
-#define MCP_EVENT_OTHER_DRIVER_RESET_REQ                0x00010000
-
-};
-
+#define PORT_0                          0
+#define PORT_1                          1
+#define PORT_MAX                        2
 
 /****************************************************************************
  * Shared HW configuration                                                  *
@@ -249,7 +89,7 @@ struct shared_hw_cfg {					 /* NVRAM Offset */
 #define SHARED_HW_CFG_SMBUS_TIMING_100KHZ           0x00000000
 #define SHARED_HW_CFG_SMBUS_TIMING_400KHZ           0x00001000
 
-#define SHARED_HW_CFG_HIDE_FUNC1                    0x00002000
+#define SHARED_HW_CFG_HIDE_PORT1                    0x00002000
 
         u32 power_dissipated;                                   /* 0x11c */
 #define SHARED_HW_CFG_POWER_DIS_CMN_MASK            0xff000000
@@ -290,6 +130,8 @@ struct shared_hw_cfg {					 /* NVRAM Offset */
 #define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1015G    0x00000006
 #define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1020G    0x00000007
 #define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G    0x00000008
+#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G    0x00000009
+#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G    0x0000000a
 
 #define SHARED_HW_CFG_BOARD_VER_MASK                0xffff0000
 #define SHARED_HW_CFG_BOARD_VER_SHIFT               16
@@ -304,13 +146,12 @@ struct shared_hw_cfg {					 /* NVRAM Offset */
 
 };
 
+
 /****************************************************************************
  * Port HW configuration                                                    *
  ****************************************************************************/
-struct port_hw_cfg {    /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */
+struct port_hw_cfg {                        /* port 0: 0x12c  port 1: 0x2bc */
 
-        /* Fields below are port specific (in anticipation of dual port
-           devices */
         u32 pci_id;
 #define PORT_HW_CFG_PCI_VENDOR_ID_MASK              0xffff0000
 #define PORT_HW_CFG_PCI_DEVICE_ID_MASK              0x0000ffff
@@ -420,6 +261,8 @@ struct port_hw_cfg {	/* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706       0x00000500
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8276       0x00000600
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481       0x00000700
+#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101       0x00000800
+#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE       0x0000fd00
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN      0x0000ff00
 
 #define PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK          0x000000ff
@@ -462,11 +305,13 @@ struct port_hw_cfg {	/* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */
 
 };
 
+
 /****************************************************************************
  * Shared Feature configuration                                             *
  ****************************************************************************/
 struct shared_feat_cfg {                                 /* NVRAM Offset */
-        u32 bmc_common;                                         /* 0x450 */
+
+        u32 config;                                             /* 0x450 */
 #define SHARED_FEATURE_BMC_ECHO_MODE_EN             0x00000001
 
 };
@@ -475,7 +320,8 @@ struct shared_feat_cfg {				 /* NVRAM Offset */
 /****************************************************************************
  * Port Feature configuration                                               *
  ****************************************************************************/
-struct port_feat_cfg {  /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */
+struct port_feat_cfg {                      /* port 0: 0x454  port 1: 0x4c8 */
+
         u32 config;
 #define PORT_FEATURE_BAR1_SIZE_MASK                 0x0000000f
 #define PORT_FEATURE_BAR1_SIZE_SHIFT                0
@@ -609,8 +455,7 @@ struct port_feat_cfg {	/* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */
 #define PORT_FEATURE_SMBUS_ADDR_MASK                0x000000fe
 #define PORT_FEATURE_SMBUS_ADDR_SHIFT               1
 
-        u32 iscsib_boot_cfg;
-#define PORT_FEATURE_ISCSIB_SKIP_TARGET_BOOT        0x00000001
+        u32 reserved1;
 
         u32 link_config;    /* Used as HW defaults for the driver */
 #define PORT_FEATURE_CONNECTED_SWITCH_MASK          0x03000000
@@ -657,20 +502,201 @@ struct port_feat_cfg {	/* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */
 };
 
 
+/*****************************************************************************
+ * Device Information                                                        *
+ *****************************************************************************/
+struct dev_info {                                                    /* size */
+
+        u32    bc_rev; /* 8 bits each: major, minor, build */           /* 4 */
+
+        struct shared_hw_cfg     shared_hw_config;                     /* 40 */
+
+        struct port_hw_cfg       port_hw_config[PORT_MAX];      /* 400*2=800 */
+
+        struct shared_feat_cfg   shared_feature_config;                 /* 4 */
+
+        struct port_feat_cfg     port_feature_config[PORT_MAX]; /* 116*2=232 */
+
+};
+
+
+#define FUNC_0                          0
+#define FUNC_1                          1
+#define E1_FUNC_MAX                     2
+#define FUNC_MAX                        E1_FUNC_MAX
+
+
+/* This value (in milliseconds) determines the frequency of the driver
+ * issuing the PULSE message code.  The firmware monitors this periodic
+ * pulse to determine when to switch to an OS-absent mode. */
+#define DRV_PULSE_PERIOD_MS             250
+
+/* This value (in milliseconds) determines how long the driver should
+ * wait for an acknowledgement from the firmware before timing out.  Once
+ * the firmware has timed out, the driver will assume there is no firmware
+ * running and there won't be any firmware-driver synchronization during a
+ * driver reset. */
+#define FW_ACK_TIME_OUT_MS              5000
+
+#define FW_ACK_POLL_TIME_MS             1
+
+#define FW_ACK_NUM_OF_POLL      (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS)
+
+/* LED Blink rate that will achieve ~15.9Hz */
+#define LED_BLINK_RATE_VAL              480
+
 /****************************************************************************
- * Device Information                                                       *
+ * Driver <-> FW Mailbox                                                    *
  ****************************************************************************/
-struct dev_info {                                                   /* size */
+struct drv_port_mb {
+
+        u32 link_status;
+        /* Driver should update this field on any link change event */
+
+#define LINK_STATUS_LINK_FLAG_MASK                      0x00000001
+#define LINK_STATUS_LINK_UP                             0x00000001
+#define LINK_STATUS_SPEED_AND_DUPLEX_MASK               0x0000001E
+#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE    (0<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10THD              (1<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD              (2<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD            (3<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_100T4              (4<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD            (5<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD            (6<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD            (7<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD            (7<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD            (8<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD            (9<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD            (9<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD             (10<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD             (10<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD             (11<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD             (11<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD           (12<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD           (12<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD             (13<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD             (13<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD             (14<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD             (14<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD             (15<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD             (15<<1)
+
+#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK            0x00000020
+#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED              0x00000020
+
+#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE             0x00000040
+#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK        0x00000080
+#define LINK_STATUS_PARALLEL_DETECTION_USED             0x00000080
+
+#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE        0x00000200
+#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE        0x00000400
+#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE          0x00000800
+#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE        0x00001000
+#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE        0x00002000
+#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE          0x00004000
+#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE          0x00008000
+
+#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK           0x00010000
+#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED             0x00010000
+
+#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK           0x00020000
+#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED             0x00020000
+
+#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK      0x000C0000
+#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE      (0<<18)
+#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE        (1<<18)
+#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE       (2<<18)
+#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE             (3<<18)
+
+#define LINK_STATUS_SERDES_LINK                         0x00100000
+
+#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE        0x00200000
+#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE        0x00400000
+#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE         0x00800000
+#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE         0x01000000
+#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE       0x02000000
+#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE         0x04000000
+#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE         0x08000000
+#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE         0x10000000
 
-        u32    bc_rev; /* 8 bits each: major, minor, build */          /* 4 */
+        u32 reserved[3];
 
-        struct shared_hw_cfg     shared_hw_config;                    /* 40 */
+};
+
+
+struct drv_func_mb {
+
+        u32 drv_mb_header;
+#define DRV_MSG_CODE_MASK                               0xffff0000
+#define DRV_MSG_CODE_LOAD_REQ                           0x10000000
+#define DRV_MSG_CODE_LOAD_DONE                          0x11000000
+#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN                  0x20000000
+#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS                 0x20010000
+#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP                 0x20020000
+#define DRV_MSG_CODE_UNLOAD_DONE                        0x21000000
+#define DRV_MSG_CODE_DIAG_ENTER_REQ                     0x50000000
+#define DRV_MSG_CODE_DIAG_EXIT_REQ                      0x60000000
+#define DRV_MSG_CODE_VALIDATE_KEY                       0x70000000
+#define DRV_MSG_CODE_GET_CURR_KEY                       0x80000000
+#define DRV_MSG_CODE_GET_UPGRADE_KEY                    0x81000000
+#define DRV_MSG_CODE_GET_MANUF_KEY                      0x82000000
+#define DRV_MSG_CODE_LOAD_L2B_PRAM                      0x90000000
+
+#define DRV_MSG_SEQ_NUMBER_MASK                         0x0000ffff
+
+        u32 drv_mb_param;
+
+        u32 fw_mb_header;
+#define FW_MSG_CODE_MASK                                0xffff0000
+#define FW_MSG_CODE_DRV_LOAD_COMMON                     0x10100000
+#define FW_MSG_CODE_DRV_LOAD_PORT                       0x10110000
+#define FW_MSG_CODE_DRV_LOAD_FUNCTION                   0x10120000
+#define FW_MSG_CODE_DRV_LOAD_REFUSED                    0x10200000
+#define FW_MSG_CODE_DRV_LOAD_DONE                       0x11100000
+#define FW_MSG_CODE_DRV_UNLOAD_COMMON                   0x20100000
+#define FW_MSG_CODE_DRV_UNLOAD_PORT                     0x20110000
+#define FW_MSG_CODE_DRV_UNLOAD_FUNCTION                 0x20120000
+#define FW_MSG_CODE_DRV_UNLOAD_DONE                     0x21100000
+#define FW_MSG_CODE_DIAG_ENTER_DONE                     0x50100000
+#define FW_MSG_CODE_DIAG_REFUSE                         0x50200000
+#define FW_MSG_CODE_DIAG_EXIT_DONE                      0x60100000
+#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS                0x70100000
+#define FW_MSG_CODE_VALIDATE_KEY_FAILURE                0x70200000
+#define FW_MSG_CODE_GET_KEY_DONE                        0x80100000
+#define FW_MSG_CODE_NO_KEY                              0x80f00000
+#define FW_MSG_CODE_LIC_INFO_NOT_READY                  0x80f80000
+#define FW_MSG_CODE_L2B_PRAM_LOADED                     0x90100000
+#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE             0x90210000
+#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE             0x90220000
+#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE             0x90230000
+#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE             0x90240000
+
+#define FW_MSG_SEQ_NUMBER_MASK                          0x0000ffff
+
+        u32 fw_mb_param;
+
+        u32 drv_pulse_mb;
+#define DRV_PULSE_SEQ_MASK                              0x00007fff
+#define DRV_PULSE_SYSTEM_TIME_MASK                      0xffff0000
+        /* The system time is in the format of
+         * (year-2001)*12*32 + month*32 + day. */
+#define DRV_PULSE_ALWAYS_ALIVE                          0x00008000
+        /* Indicate to the firmware not to go into the
+         * OS-absent when it is not getting driver pulse.
+         * This is used for debugging as well for PXE(MBA). */
 
-        struct port_hw_cfg       port_hw_config[FUNC_MAX];     /* 400*2=800 */
+        u32 mcp_pulse_mb;
+#define MCP_PULSE_SEQ_MASK                              0x00007fff
+#define MCP_PULSE_ALWAYS_ALIVE                          0x00008000
+        /* Indicates to the driver not to assert due to lack
+         * of MCP response */
+#define MCP_EVENT_MASK                                  0xffff0000
+#define MCP_EVENT_OTHER_DRIVER_RESET_REQ                0x00010000
 
-        struct shared_feat_cfg   shared_feature_config;                /* 4 */
+        u32 iscsi_boot_signature;
+        u32 iscsi_boot_block_offset;
 
-        struct port_feat_cfg     port_feature_config[FUNC_MAX];/* 116*2=232 */
+        u32 reserved[3];
 
 };
 
@@ -678,9 +704,8 @@ struct dev_info {						    /* size */
 /****************************************************************************
  * Management firmware state                                                *
  ****************************************************************************/
-/* Allocate 320 bytes for management firmware: still not known exactly
- * how much IMD needs. */
-#define MGMTFW_STATE_WORD_SIZE                              80
+/* Allocate 440 bytes for management firmware */
+#define MGMTFW_STATE_WORD_SIZE                              110
 
 struct mgmtfw_state {
         u32 opaque[MGMTFW_STATE_WORD_SIZE];
@@ -691,31 +716,40 @@ struct mgmtfw_state {
  * Shared Memory Region                                                     *
  ****************************************************************************/
 struct shmem_region {                          /*   SharedMem Offset (size) */
-        u32                 validity_map[FUNC_MAX];    /* 0x0 (4 * 2 = 0x8) */
-#define SHR_MEM_VALIDITY_PCI_CFG                    0x00000001
-#define SHR_MEM_VALIDITY_MB                         0x00000002
-#define SHR_MEM_VALIDITY_DEV_INFO                   0x00000004
+
+        u32                     validity_map[PORT_MAX];  /* 0x0 (4*2 = 0x8) */
+#define SHR_MEM_FORMAT_REV_ID                       ('A'<<24)
+#define SHR_MEM_FORMAT_REV_MASK                     0xff000000
+        /* validity bits */
+#define SHR_MEM_VALIDITY_PCI_CFG                    0x00100000
+#define SHR_MEM_VALIDITY_MB                         0x00200000
+#define SHR_MEM_VALIDITY_DEV_INFO                   0x00400000
+#define SHR_MEM_VALIDITY_RESERVED                   0x00000007
         /* One licensing bit should be set */
 #define SHR_MEM_VALIDITY_LIC_KEY_IN_EFFECT_MASK     0x00000038
 #define SHR_MEM_VALIDITY_LIC_MANUF_KEY_IN_EFFECT    0x00000008
 #define SHR_MEM_VALIDITY_LIC_UPGRADE_KEY_IN_EFFECT  0x00000010
 #define SHR_MEM_VALIDITY_LIC_NO_KEY_IN_EFFECT       0x00000020
+        /* Active MFW */
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_UNKNOWN         0x00000000
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_IPMI            0x00000040
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_UMP             0x00000080
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_NCSI            0x000000c0
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_NONE            0x000001c0
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_MASK            0x000001c0
 
-        struct drv_fw_mb    drv_fw_mb[FUNC_MAX];     /* 0x8 (28 * 2 = 0x38) */
-
-        struct dev_info     dev_info;                       /* 0x40 (0x438) */
+        struct dev_info         dev_info;                /* 0x8     (0x438) */
 
-#ifdef _LICENSE_H
-        license_key_t       drv_lic_key[FUNC_MAX]; /* 0x478 (52 * 2 = 0x68) */
-#else /* Linux! */
-        u8                  reserved[52*FUNC_MAX];
-#endif
+        u8                      reserved[52*PORT_MAX];
 
         /* FW information (for internal FW use) */
-        u32                 fw_info_fio_offset;            /* 0x4e0 (0x4)   */
-        struct mgmtfw_state mgmtfw_state;                  /* 0x4e4 (0x140) */
+        u32                     fw_info_fio_offset;    /* 0x4a8       (0x4) */
+        struct mgmtfw_state     mgmtfw_state;          /* 0x4ac     (0x1b8) */
+
+        struct drv_port_mb      port_mb[PORT_MAX];     /* 0x664 (16*2=0x20) */
+        struct drv_func_mb      func_mb[FUNC_MAX];     /* 0x684 (44*2=0x58) */
 
-};                                                         /* 0x624 */
+};                                                     /* 0x6dc */
 
 
 #define BCM_5710_FW_MAJOR_VERSION                       4
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index 04f93bff2ef4..dcaecc53bdb1 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -1,6 +1,6 @@
 /* bnx2x_init.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -409,7 +409,7 @@ static void bnx2x_init_pxp(struct bnx2x *bp)
 
         pci_read_config_word(bp->pdev,
                              bp->pcie_cap + PCI_EXP_DEVCTL, (u16 *)&val);
-        DP(NETIF_MSG_HW, "read 0x%x from devctl\n", val);
+        DP(NETIF_MSG_HW, "read 0x%x from devctl\n", (u16)val);
         w_order = ((val & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
         r_order = ((val & PCI_EXP_DEVCTL_READRQ) >> 12);
 
@@ -472,10 +472,14 @@ static void bnx2x_init_pxp(struct bnx2x *bp)
         REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val);
 
         REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order);
-        REG_WR(bp, PXP2_REG_RQ_WR_MBS0 + 8, w_order);
+        REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order);
         REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order);
-        REG_WR(bp, PXP2_REG_RQ_RD_MBS0 + 8, r_order);
+        REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order);
 
+        if (r_order == MAX_RD_ORD)
+                REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00);
+
+        REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
         REG_WR(bp, PXP2_REG_WR_DMAE_TH, (128 << w_order)/16);
 }
 
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index 86055297ab02..5a1aa0b55044 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -1,6 +1,6 @@
 /* bnx2x_reg.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -24,6 +24,8 @@
 #define BRB1_REG_BRB1_INT_STS                                    0x6011c
 /* [RW 4] Parity mask register #0 read/write */
 #define BRB1_REG_BRB1_PRTY_MASK                                  0x60138
+/* [R 4] Parity register #0 read */
+#define BRB1_REG_BRB1_PRTY_STS                                   0x6012c
 /* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
    address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
    BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */
@@ -281,6 +283,8 @@
 #define CDU_REG_CDU_INT_STS                                      0x101030
 /* [RW 5] Parity mask register #0 read/write */
 #define CDU_REG_CDU_PRTY_MASK                                    0x10104c
+/* [R 5] Parity register #0 read */
+#define CDU_REG_CDU_PRTY_STS                                     0x101040
 /* [RC 32] logging of error data in case of a CDU load error:
    {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
    ype_error; ctual_active; ctual_compressed_context}; */
@@ -308,6 +312,8 @@
 #define CFC_REG_CFC_INT_STS_CLR                                  0x104100
 /* [RW 4] Parity mask register #0 read/write */
 #define CFC_REG_CFC_PRTY_MASK                                    0x104118
+/* [R 4] Parity register #0 read */
+#define CFC_REG_CFC_PRTY_STS                                     0x10410c
 /* [RW 21] CID cam access (21:1 - Data; alid - 0) */
 #define CFC_REG_CID_CAM                                          0x104800
 #define CFC_REG_CONTROL0                                         0x104028
@@ -354,6 +360,8 @@
 #define CSDM_REG_CSDM_INT_MASK_1                                 0xc22ac
 /* [RW 11] Parity mask register #0 read/write */
 #define CSDM_REG_CSDM_PRTY_MASK                                  0xc22bc
+/* [R 11] Parity register #0 read */
+#define CSDM_REG_CSDM_PRTY_STS                                   0xc22b0
 #define CSDM_REG_ENABLE_IN1                                      0xc2238
 #define CSDM_REG_ENABLE_IN2                                      0xc223c
 #define CSDM_REG_ENABLE_OUT1                                     0xc2240
@@ -438,6 +446,9 @@
 /* [RW 32] Parity mask register #0 read/write */
 #define CSEM_REG_CSEM_PRTY_MASK_0                                0x200130
 #define CSEM_REG_CSEM_PRTY_MASK_1                                0x200140
+/* [R 32] Parity register #0 read */
+#define CSEM_REG_CSEM_PRTY_STS_0                                 0x200124
+#define CSEM_REG_CSEM_PRTY_STS_1                                 0x200134
 #define CSEM_REG_ENABLE_IN                                       0x2000a4
 #define CSEM_REG_ENABLE_OUT                                      0x2000a8
 /* [RW 32] This address space contains all registers and memories that are
@@ -526,6 +537,8 @@
 #define CSEM_REG_TS_9_AS                                         0x20005c
 /* [RW 1] Parity mask register #0 read/write */
 #define DBG_REG_DBG_PRTY_MASK                                    0xc0a8
+/* [R 1] Parity register #0 read */
+#define DBG_REG_DBG_PRTY_STS                                     0xc09c
 /* [RW 2] debug only: These bits indicate the credit for PCI request type 4
    interface; MUST be configured AFTER pci_ext_buffer_strt_addr_lsb/msb are
    configured */
@@ -543,6 +556,8 @@
 #define DMAE_REG_DMAE_INT_MASK                                   0x102054
 /* [RW 4] Parity mask register #0 read/write */
 #define DMAE_REG_DMAE_PRTY_MASK                                  0x102064
+/* [R 4] Parity register #0 read */
+#define DMAE_REG_DMAE_PRTY_STS                                   0x102058
 /* [RW 1] Command 0 go. */
 #define DMAE_REG_GO_C0                                           0x102080
 /* [RW 1] Command 1 go. */
@@ -623,6 +638,8 @@
 #define DORQ_REG_DORQ_INT_STS_CLR                                0x170178
 /* [RW 2] Parity mask register #0 read/write */
 #define DORQ_REG_DORQ_PRTY_MASK                                  0x170190
+/* [R 2] Parity register #0 read */
+#define DORQ_REG_DORQ_PRTY_STS                                   0x170184
 /* [RW 8] The address to write the DPM CID to STORM. */
 #define DORQ_REG_DPM_CID_ADDR                                    0x170044
 /* [RW 5] The DPM mode CID extraction offset. */
@@ -692,6 +709,8 @@
 #define HC_REG_CONFIG_1                                          0x108004
 /* [RW 3] Parity mask register #0 read/write */
 #define HC_REG_HC_PRTY_MASK                                      0x1080a0
+/* [R 3] Parity register #0 read */
+#define HC_REG_HC_PRTY_STS                                       0x108094
 /* [RW 17] status block interrupt mask; one in each bit means unmask; zerow
    in each bit means mask; bit 0 - default SB; bit 1 - SB_0; bit 2 - SB_1...
    bit 16- SB_15; addr 0 - port 0; addr 1 - port 1 */
@@ -1127,6 +1146,7 @@
 #define MISC_REG_AEU_GENERAL_ATTN_17                             0xa044
 #define MISC_REG_AEU_GENERAL_ATTN_18                             0xa048
 #define MISC_REG_AEU_GENERAL_ATTN_19                             0xa04c
+#define MISC_REG_AEU_GENERAL_ATTN_10                             0xa028
 #define MISC_REG_AEU_GENERAL_ATTN_11                             0xa02c
 #define MISC_REG_AEU_GENERAL_ATTN_2                              0xa008
 #define MISC_REG_AEU_GENERAL_ATTN_20                             0xa050
@@ -1135,6 +1155,9 @@
 #define MISC_REG_AEU_GENERAL_ATTN_4                              0xa010
 #define MISC_REG_AEU_GENERAL_ATTN_5                              0xa014
 #define MISC_REG_AEU_GENERAL_ATTN_6                              0xa018
+#define MISC_REG_AEU_GENERAL_ATTN_7                              0xa01c
+#define MISC_REG_AEU_GENERAL_ATTN_8                              0xa020
+#define MISC_REG_AEU_GENERAL_ATTN_9                              0xa024
 /* [RW 32] first 32b for inverting the input for function 0; for each bit:
    0= do not invert; 1= invert; mapped as follows: [0] NIG attention for
    function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp;
@@ -1183,6 +1206,40 @@
    starts at 0x0 for the A0 tape-out and increments by one for each
    all-layer tape-out. */
 #define MISC_REG_CHIP_REV                                        0xa40c
+/* [RW 32] The following driver registers(1..6) represent 6 drivers and 32
+   clients. Each client can be controlled by one driver only. One in each
+   bit represent that this driver control the appropriate client (Ex: bit 5
+   is set means this driver control client number 5). addr1 = set; addr0 =
+   clear; read from both addresses will give the same result = status. write
+   to address 1 will set a request to control all the clients that their
+   appropriate bit (in the write command) is set. if the client is free (the
+   appropriate bit in all the other drivers is clear) one will be written to
+   that driver register; if the client isn't free the bit will remain zero.
+   if the appropriate bit is set (the driver request to gain control on a
+   client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
+   interrupt will be asserted). write to address 0 will set a request to
+   free all the clients that their appropriate bit (in the write command) is
+   set. if the appropriate bit is clear (the driver request to free a client
+   it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
+   be asserted). */
+#define MISC_REG_DRIVER_CONTROL_1                                0xa510
+/* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of
+   these bits is written as a '1'; the corresponding SPIO bit will turn off
+   it's drivers and become an input. This is the reset state of all GPIO
+   pins. The read value of these bits will be a '1' if that last command
+   (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff).
+   [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written
+   as a '1'; the corresponding GPIO bit will drive low. The read value of
+   these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for
+   this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0;
+   SET When any of these bits is written as a '1'; the corresponding GPIO
+   bit will drive high (if it has that capability). The read value of these
+   bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this
+   bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0;
+   RO; These bits indicate the read value of each of the eight GPIO pins.
+   This is the result value of the pin; not the drive value. Writing these
+   bits will have not effect. */
+#define MISC_REG_GPIO                                            0xa490
 /* [RW 1] Setting this bit enables a timer in the GRC block to timeout any
    access that does not finish within
    ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is
@@ -1223,6 +1280,8 @@
 #define MISC_REG_MISC_INT_MASK                                   0xa388
 /* [RW 1] Parity mask register #0 read/write */
 #define MISC_REG_MISC_PRTY_MASK                                  0xa398
+/* [R 1] Parity register #0 read */
+#define MISC_REG_MISC_PRTY_STS                                   0xa38c
 /* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911.
    inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1
    divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1
@@ -1264,6 +1323,55 @@
 /* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is
    shared with the driver resides */
 #define MISC_REG_SHARED_MEM_ADDR                                 0xa2b4
+/* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1';
+   the corresponding SPIO bit will turn off it's drivers and become an
+   input. This is the reset state of all SPIO pins. The read value of these
+   bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this
+   bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits
+   is written as a '1'; the corresponding SPIO bit will drive low. The read
+   value of these bits will be a '1' if that last command (#SET; #CLR; or
+#FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of
+   these bits is written as a '1'; the corresponding SPIO bit will drive
+   high (if it has that capability). The read value of these bits will be a
+   '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET.
+   (reset value 0). [7-0] VALUE RO; These bits indicate the read value of
+   each of the eight SPIO pins. This is the result value of the pin; not the
+   drive value. Writing these bits will have not effect. Each 8 bits field
+   is divided as follows: [0] VAUX Enable; when pulsed low; enables supply
+   from VAUX. (This is an output pin only; the FLOAT field is not applicable
+   for this pin); [1] VAUX Disable; when pulsed low; disables supply form
+   VAUX. (This is an output pin only; FLOAT field is not applicable for this
+   pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to
+   select VAUX supply. (This is an output pin only; it is not controlled by
+   the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT
+   field is not applicable for this pin; only the VALUE fields is relevant -
+   it reflects the output value); [3] reserved; [4] spio_4; [5] spio_5; [6]
+   Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP
+   device ID select; read by UMP firmware. */
+#define MISC_REG_SPIO                                            0xa4fc
+/* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC.
+   according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5;
+   [7:0] reserved */
+#define MISC_REG_SPIO_EVENT_EN                                   0xa2b8
+/* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the
+   corresponding bit in the #OLD_VALUE register. This will acknowledge an
+   interrupt on the falling edge of corresponding SPIO input (reset value
+   0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit
+   in the #OLD_VALUE register. This will acknowledge an interrupt on the
+   rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE
+   RO; These bits indicate the old value of the SPIO input value. When the
+   ~INT_STATE bit is set; this bit indicates the OLD value of the pin such
+   that if ~INT_STATE is set and this bit is '0'; then the interrupt is due
+   to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the
+   interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE
+   RO; These bits indicate the current SPIO interrupt state for each SPIO
+   pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR
+   command bit is written. This bit is set when the SPIO input does not
+   match the current value in #OLD_VALUE (reset value 0). */
+#define MISC_REG_SPIO_INT                                        0xa500
+/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
+   loaded; 0-prepare; -unprepare */
+#define MISC_REG_UNPREPARED                                      0xa424
 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT      (0x1<<0)
 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS    (0x1<<9)
 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G          (0x1<<15)
@@ -1392,6 +1500,9 @@
 #define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC                         0x10044
 /* [RW 1] Input enable for RX PBF LP IF */
 #define NIG_REG_PBF_LB_IN_EN                                     0x100b4
+/* [RW 1] Value of this register will be transmitted to port swap when
+   ~nig_registers_strap_override.strap_override =1 */
+#define NIG_REG_PORT_SWAP                                        0x10394
 /* [RW 1] output enable for RX parser descriptor IF */
 #define NIG_REG_PRS_EOP_OUT_EN                                   0x10104
 /* [RW 1] Input enable for RX parser request IF */
@@ -1410,6 +1521,10 @@
 #define NIG_REG_STAT2_BRB_OCTET                                  0x107e0
 #define NIG_REG_STATUS_INTERRUPT_PORT0                           0x10328
 #define NIG_REG_STATUS_INTERRUPT_PORT1                           0x1032c
+/* [RW 1] port swap mux selection. If this register equal to 0 then port
+   swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then
+   ort swap is equal to ~nig_registers_port_swap.port_swap */
+#define NIG_REG_STRAP_OVERRIDE                                   0x10398
 /* [RW 1] output enable for RX_XCM0 IF */
 #define NIG_REG_XCM0_OUT_EN                                      0x100f0
 /* [RW 1] output enable for RX_XCM1 IF */
@@ -1499,6 +1614,8 @@
 #define PB_REG_PB_INT_STS                                        0x1c
 /* [RW 4] Parity mask register #0 read/write */
 #define PB_REG_PB_PRTY_MASK                                      0x38
+/* [R 4] Parity register #0 read */
+#define PB_REG_PB_PRTY_STS                                       0x2c
 #define PRS_REG_A_PRSU_20                                        0x40134
 /* [R 8] debug only: CFC load request current credit. Transaction based. */
 #define PRS_REG_CFC_LD_CURRENT_CREDIT                            0x40164
@@ -1590,6 +1707,8 @@
 #define PRS_REG_PRS_INT_STS                                      0x40188
 /* [RW 8] Parity mask register #0 read/write */
 #define PRS_REG_PRS_PRTY_MASK                                    0x401a4
+/* [R 8] Parity register #0 read */
+#define PRS_REG_PRS_PRTY_STS                                     0x40198
 /* [RW 8] Context region for pure acknowledge packets. Used in CFC load
    request message */
 #define PRS_REG_PURE_REGIONS                                     0x40024
@@ -1718,6 +1837,9 @@
 /* [RW 32] Parity mask register #0 read/write */
 #define PXP2_REG_PXP2_PRTY_MASK_0                                0x120588
 #define PXP2_REG_PXP2_PRTY_MASK_1                                0x120598
+/* [R 32] Parity register #0 read */
+#define PXP2_REG_PXP2_PRTY_STS_0                                 0x12057c
+#define PXP2_REG_PXP2_PRTY_STS_1                                 0x12058c
 /* [R 1] Debug only: The 'almost full' indication from each fifo (gives
    indication about backpressure) */
 #define PXP2_REG_RD_ALMOST_FULL_0                                0x120424
@@ -1911,6 +2033,8 @@
 #define PXP2_REG_RQ_HC_ENDIAN_M                                  0x1201a8
 /* [WB 53] Onchip address table */
 #define PXP2_REG_RQ_ONCHIP_AT                                    0x122000
+/* [RW 13] Pending read limiter threshold; in Dwords */
+#define PXP2_REG_RQ_PDR_LIMIT                                    0x12033c
 /* [RW 2] Endian mode for qm */
 #define PXP2_REG_RQ_QM_ENDIAN_M                                  0x120194
 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
@@ -1921,6 +2045,9 @@
 /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
    001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
 #define PXP2_REG_RQ_RD_MBS0                                      0x120160
+/* [RW 3] Max burst size filed for read requests port 1; 000 - 128B;
+   001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
+#define PXP2_REG_RQ_RD_MBS1                                      0x120168
 /* [RW 2] Endian mode for src */
 #define PXP2_REG_RQ_SRC_ENDIAN_M                                 0x12019c
 /* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k;
@@ -2000,10 +2127,17 @@
 /* [RW 3] Max burst size filed for write requests port 0; 000 - 128B;
    001:256B; 010: 512B; */
 #define PXP2_REG_RQ_WR_MBS0                                      0x12015c
+/* [RW 3] Max burst size filed for write requests port 1; 000 - 128B;
+   001:256B; 010: 512B; */
+#define PXP2_REG_RQ_WR_MBS1                                      0x120164
 /* [RW 10] if Number of entries in dmae fifo will be higer than this
    threshold then has_payload indication will be asserted; the default value
    should be equal to &gt;  write MBS size! */
 #define PXP2_REG_WR_DMAE_TH                                      0x120368
+/* [RW 10] if Number of entries in usdmdp fifo will be higer than this
+   threshold then has_payload indication will be asserted; the default value
+   should be equal to &gt;  write MBS size! */
+#define PXP2_REG_WR_USDMDP_TH                                    0x120348
 /* [R 1] debug only: Indication if PSWHST arbiter is idle */
 #define PXP_REG_HST_ARB_IS_IDLE                                  0x103004
 /* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means
@@ -2021,6 +2155,8 @@
 #define PXP_REG_PXP_INT_STS_CLR_0                                0x10306c
 /* [RW 26] Parity mask register #0 read/write */
 #define PXP_REG_PXP_PRTY_MASK                                    0x103094
+/* [R 26] Parity register #0 read */
+#define PXP_REG_PXP_PRTY_STS                                     0x103088
 /* [RW 4] The activity counter initial increment value sent in the load
    request */
 #define QM_REG_ACTCTRINITVAL_0                                   0x168040
@@ -2127,6 +2263,8 @@
 #define QM_REG_QM_INT_STS                                        0x168438
 /* [RW 9] Parity mask register #0 read/write */
 #define QM_REG_QM_PRTY_MASK                                      0x168454
+/* [R 9] Parity register #0 read */
+#define QM_REG_QM_PRTY_STS                                       0x168448
 /* [R 32] Current queues in pipeline: Queues from 32 to 63 */
 #define QM_REG_QSTATUS_HIGH                                      0x16802c
 /* [R 32] Current queues in pipeline: Queues from 0 to 31 */
@@ -2410,6 +2548,8 @@
 #define SRC_REG_SRC_INT_STS                                      0x404ac
 /* [RW 3] Parity mask register #0 read/write */
 #define SRC_REG_SRC_PRTY_MASK                                    0x404c8
+/* [R 3] Parity register #0 read */
+#define SRC_REG_SRC_PRTY_STS                                     0x404bc
 /* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
 #define TCM_REG_CAM_OCCUP                                        0x5017c
 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
@@ -2730,6 +2870,8 @@
 #define TSDM_REG_TSDM_INT_MASK_1                                 0x422ac
 /* [RW 11] Parity mask register #0 read/write */
 #define TSDM_REG_TSDM_PRTY_MASK                                  0x422bc
+/* [R 11] Parity register #0 read */
+#define TSDM_REG_TSDM_PRTY_STS                                   0x422b0
 /* [RW 5] The number of time_slots in the arbitration cycle */
 #define TSEM_REG_ARB_CYCLE_SIZE                                  0x180034
 /* [RW 3] The source that is associated with arbitration element 0. Source
@@ -2854,6 +2996,9 @@
 /* [RW 32] Parity mask register #0 read/write */
 #define TSEM_REG_TSEM_PRTY_MASK_0                                0x180120
 #define TSEM_REG_TSEM_PRTY_MASK_1                                0x180130
+/* [R 32] Parity register #0 read */
+#define TSEM_REG_TSEM_PRTY_STS_0                                 0x180114
+#define TSEM_REG_TSEM_PRTY_STS_1                                 0x180124
 /* [R 5] Used to read the XX protection CAM occupancy counter. */
 #define UCM_REG_CAM_OCCUP                                        0xe0170
 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
@@ -3155,6 +3300,8 @@
 #define USDM_REG_USDM_INT_MASK_1                                 0xc42b0
 /* [RW 11] Parity mask register #0 read/write */
 #define USDM_REG_USDM_PRTY_MASK                                  0xc42c0
+/* [R 11] Parity register #0 read */
+#define USDM_REG_USDM_PRTY_STS                                   0xc42b4
 /* [RW 5] The number of time_slots in the arbitration cycle */
 #define USEM_REG_ARB_CYCLE_SIZE                                  0x300034
 /* [RW 3] The source that is associated with arbitration element 0. Source
@@ -3279,6 +3426,9 @@
 /* [RW 32] Parity mask register #0 read/write */
 #define USEM_REG_USEM_PRTY_MASK_0                                0x300130
 #define USEM_REG_USEM_PRTY_MASK_1                                0x300140
+/* [R 32] Parity register #0 read */
+#define USEM_REG_USEM_PRTY_STS_0                                 0x300124
+#define USEM_REG_USEM_PRTY_STS_1                                 0x300134
 /* [RW 2] The queue index for registration on Aux1 counter flag. */
 #define XCM_REG_AUX1_Q                                           0x20134
 /* [RW 2] Per each decision rule the queue index to register to. */
@@ -3684,6 +3834,8 @@
 #define XSDM_REG_XSDM_INT_MASK_1                                 0x1662ac
 /* [RW 11] Parity mask register #0 read/write */
 #define XSDM_REG_XSDM_PRTY_MASK                                  0x1662bc
+/* [R 11] Parity register #0 read */
+#define XSDM_REG_XSDM_PRTY_STS                                   0x1662b0
 /* [RW 5] The number of time_slots in the arbitration cycle */
 #define XSEM_REG_ARB_CYCLE_SIZE                                  0x280034
 /* [RW 3] The source that is associated with arbitration element 0. Source
@@ -3808,6 +3960,9 @@
 /* [RW 32] Parity mask register #0 read/write */
 #define XSEM_REG_XSEM_PRTY_MASK_0                                0x280130
 #define XSEM_REG_XSEM_PRTY_MASK_1                                0x280140
+/* [R 32] Parity register #0 read */
+#define XSEM_REG_XSEM_PRTY_STS_0                                 0x280124
+#define XSEM_REG_XSEM_PRTY_STS_1                                 0x280134
 #define MCPR_NVM_ACCESS_ENABLE_EN                                (1L<<0)
 #define MCPR_NVM_ACCESS_ENABLE_WR_EN                             (1L<<1)
 #define MCPR_NVM_ADDR_NVM_ADDR_VALUE                             (0xffffffL<<0)
@@ -3847,6 +4002,8 @@
 #define EMAC_MDIO_COMM_START_BUSY                                (1L<<29)
 #define EMAC_MDIO_MODE_AUTO_POLL                                 (1L<<4)
 #define EMAC_MDIO_MODE_CLAUSE_45                                 (1L<<31)
+#define EMAC_MDIO_MODE_CLOCK_CNT                                 (0x3fL<<16)
+#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT                        16
 #define EMAC_MODE_25G_MODE                                       (1L<<5)
 #define EMAC_MODE_ACPI_RCVD                                      (1L<<20)
 #define EMAC_MODE_HALF_DUPLEX                                    (1L<<1)
@@ -3874,6 +4031,17 @@
 #define EMAC_RX_MTU_SIZE_JUMBO_ENA                               (1L<<31)
 #define EMAC_TX_MODE_EXT_PAUSE_EN                                (1L<<3)
 #define EMAC_TX_MODE_RESET                                       (1L<<0)
+#define MISC_REGISTERS_GPIO_1                                    1
+#define MISC_REGISTERS_GPIO_2                                    2
+#define MISC_REGISTERS_GPIO_3                                    3
+#define MISC_REGISTERS_GPIO_CLR_POS                              16
+#define MISC_REGISTERS_GPIO_FLOAT                                (0xffL<<24)
+#define MISC_REGISTERS_GPIO_FLOAT_POS                            24
+#define MISC_REGISTERS_GPIO_INPUT_HI_Z                           2
+#define MISC_REGISTERS_GPIO_OUTPUT_HIGH                          1
+#define MISC_REGISTERS_GPIO_OUTPUT_LOW                           0
+#define MISC_REGISTERS_GPIO_PORT_SHIFT                           4
+#define MISC_REGISTERS_GPIO_SET_POS                              8
 #define MISC_REGISTERS_RESET_REG_1_CLEAR                         0x588
 #define MISC_REGISTERS_RESET_REG_1_SET                           0x584
 #define MISC_REGISTERS_RESET_REG_2_CLEAR                         0x598
@@ -3891,6 +4059,25 @@
 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW    (0x1<<4)
 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8)
 #define MISC_REGISTERS_RESET_REG_3_SET                           0x5a4
+#define MISC_REGISTERS_SPIO_4                                    4
+#define MISC_REGISTERS_SPIO_5                                    5
+#define MISC_REGISTERS_SPIO_7                                    7
+#define MISC_REGISTERS_SPIO_CLR_POS                              16
+#define MISC_REGISTERS_SPIO_FLOAT                                (0xffL<<24)
+#define GRC_MISC_REGISTERS_SPIO_FLOAT7                           0x80000000
+#define GRC_MISC_REGISTERS_SPIO_FLOAT6                           0x40000000
+#define GRC_MISC_REGISTERS_SPIO_FLOAT5                           0x20000000
+#define GRC_MISC_REGISTERS_SPIO_FLOAT4                           0x10000000
+#define MISC_REGISTERS_SPIO_FLOAT_POS                            24
+#define MISC_REGISTERS_SPIO_INPUT_HI_Z                           2
+#define MISC_REGISTERS_SPIO_INT_OLD_SET_POS                      16
+#define MISC_REGISTERS_SPIO_OUTPUT_HIGH                          1
+#define MISC_REGISTERS_SPIO_OUTPUT_LOW                           0
+#define MISC_REGISTERS_SPIO_SET_POS                              8
+#define HW_LOCK_MAX_RESOURCE_VALUE                               31
+#define HW_LOCK_RESOURCE_8072_MDIO                               0
+#define HW_LOCK_RESOURCE_GPIO                                    1
+#define HW_LOCK_RESOURCE_SPIO                                    2
 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR                 (1<<18)
 #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT                 (1<<31)
 #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT                 (1<<9)
@@ -3918,6 +4105,7 @@
 #define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT                  (1<<3)
 #define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR                  (1<<2)
 #define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR            (1<<22)
+#define AEU_INPUTS_ATTN_BITS_SPIO5                            (1<<15)
 #define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT                 (1<<27)
 #define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT              (1<<5)
 #define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT                (1<<25)
@@ -4206,6 +4394,9 @@
 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE        0x4000
 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP                     0x11
 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE              0x8000
+#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G               0x14
+#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS      0x0001
+#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS    0x0010
 #define MDIO_XGXS_BLOCK2_TEST_MODE_LANE                 0x15
 
 #define MDIO_REG_BANK_GP_STATUS                         0x8120
@@ -4362,11 +4553,13 @@
 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE   0x0001
 
 
+#define EXT_PHY_AUTO_NEG_DEVAD                          0x7
 #define EXT_PHY_OPT_PMA_PMD_DEVAD                       0x1
 #define EXT_PHY_OPT_WIS_DEVAD                           0x2
 #define EXT_PHY_OPT_PCS_DEVAD                           0x3
 #define EXT_PHY_OPT_PHY_XS_DEVAD                        0x4
 #define EXT_PHY_OPT_CNTL                                0x0
+#define EXT_PHY_OPT_CNTL2                               0x7
 #define EXT_PHY_OPT_PMD_RX_SD                           0xa
 #define EXT_PHY_OPT_PMD_MISC_CNTL                       0xca0a
 #define EXT_PHY_OPT_PHY_IDENTIFIER                      0xc800
@@ -4378,11 +4571,24 @@
 #define EXT_PHY_OPT_LASI_STATUS                         0x9005
 #define EXT_PHY_OPT_PCS_STATUS                          0x0020
 #define EXT_PHY_OPT_XGXS_LANE_STATUS                    0x0018
+#define EXT_PHY_OPT_AN_LINK_STATUS                      0x8304
+#define EXT_PHY_OPT_AN_CL37_CL73                        0x8370
+#define EXT_PHY_OPT_AN_CL37_FD                          0xffe4
+#define EXT_PHY_OPT_AN_CL37_AN                          0xffe0
+#define EXT_PHY_OPT_AN_ADV                              0x11
 
 #define EXT_PHY_KR_PMA_PMD_DEVAD                        0x1
 #define EXT_PHY_KR_PCS_DEVAD                            0x3
 #define EXT_PHY_KR_AUTO_NEG_DEVAD                       0x7
 #define EXT_PHY_KR_CTRL                                 0x0000
+#define EXT_PHY_KR_STATUS                               0x0001
+#define EXT_PHY_KR_AUTO_NEG_COMPLETE                    0x0020
+#define EXT_PHY_KR_AUTO_NEG_ADVERT                      0x0010
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE                0x0400
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC     0x0800
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH           0x0C00
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK           0x0C00
+#define EXT_PHY_KR_LP_AUTO_NEG                          0x0013
 #define EXT_PHY_KR_CTRL2                                0x0007
 #define EXT_PHY_KR_PCS_STATUS                           0x0020
 #define EXT_PHY_KR_PMD_CTRL                             0x0096
@@ -4391,4 +4597,8 @@
 #define EXT_PHY_KR_MISC_CTRL1                           0xca85
 #define EXT_PHY_KR_GEN_CTRL                             0xca10
 #define EXT_PHY_KR_ROM_CODE                             0xca19
+#define EXT_PHY_KR_ROM_RESET_INTERNAL_MP                0x0188
+#define EXT_PHY_KR_ROM_MICRO_RESET                      0x018a
+
+#define EXT_PHY_SFX7101_XGXS_TEST1          0xc00a
 
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 571750975137..348371fda597 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -172,30 +172,30 @@ static char version[] __initdata =
    them to system IRQ numbers. This mapping is card specific and is set to
    the configuration of the Cirrus Eval board for this chip. */
 #ifdef CONFIG_ARCH_CLPS7500
-static unsigned int netcard_portlist[] __initdata =
+static unsigned int netcard_portlist[] __used __initdata =
    { 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
 static unsigned int cs8900_irq_map[] = {12,0,0,0};
 #elif defined(CONFIG_SH_HICOSH4)
-static unsigned int netcard_portlist[] __initdata =
+static unsigned int netcard_portlist[] __used __initdata =
    { 0x0300, 0};
 static unsigned int cs8900_irq_map[] = {1,0,0,0};
 #elif defined(CONFIG_MACH_IXDP2351)
-static unsigned int netcard_portlist[] __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
+static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
 #include <asm/irq.h>
 #elif defined(CONFIG_ARCH_IXDP2X01)
 #include <asm/irq.h>
-static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
+static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
 #elif defined(CONFIG_ARCH_PNX010X)
 #include <asm/irq.h>
 #include <asm/arch/gpio.h>
 #define CIRRUS_DEFAULT_BASE     IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000)      /* = Physical address 0x48200000 */
 #define CIRRUS_DEFAULT_IRQ      VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
-static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0};
+static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};
 static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
 #else
-static unsigned int netcard_portlist[] __initdata =
+static unsigned int netcard_portlist[] __used __initdata =
    { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
 static unsigned int cs8900_irq_map[] = {10,11,12,5};
 #endif
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 3beace55b58d..7fe20310eb5f 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -438,7 +438,7 @@ static void e1000_release_nvm_82571(struct e1000_hw *hw)
  *  For non-82573 silicon, write data to EEPROM at offset using SPI interface.
  *
  *  If e1000e_update_nvm_checksum is not called after this function, the
- *  EEPROM will most likley contain an invalid checksum.
+ *  EEPROM will most likely contain an invalid checksum.
  **/
 static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words,
                                  u16 *data)
@@ -547,7 +547,7 @@ static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw)
  *  poll for completion.
  *
  *  If e1000e_update_nvm_checksum is not called after this function, the
- *  EEPROM will most likley contain an invalid checksum.
+ *  EEPROM will most likely contain an invalid checksum.
  **/
 static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
                                       u16 words, u16 *data)
@@ -1053,7 +1053,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
                 /* If SerDes loopback mode is entered, there is no form
                  * of reset to take the adapter out of that mode.  So we
                  * have to explicitly take the adapter out of loopback
-                 * mode.  This prevents drivers from twidling their thumbs
+                 * mode.  This prevents drivers from twiddling their thumbs
                  * if another tool failed to take it out of loopback mode.
                  */
                 ew32(SCTL,
@@ -1098,7 +1098,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
  *  e1000e_get_laa_state_82571 - Get locally administered address state
  *  @hw: pointer to the HW structure
  *
- *  Retrieve and return the current locally administed address state.
+ *  Retrieve and return the current locally administered address state.
  **/
 bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
 {
@@ -1113,7 +1113,7 @@ bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
  *  @hw: pointer to the HW structure
  *  @state: enable/disable locally administered address
  *
- *  Enable/Disable the current locally administed address state.
+ *  Enable/Disable the current locally administers address state.
  **/
 void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
 {
@@ -1281,16 +1281,6 @@ static struct e1000_phy_operations e82_phy_ops_m88 = {
 
 static struct e1000_nvm_operations e82571_nvm_ops = {
         .acquire_nvm            = e1000_acquire_nvm_82571,
-        .read_nvm               = e1000e_read_nvm_spi,
-        .release_nvm            = e1000_release_nvm_82571,
-        .update_nvm             = e1000_update_nvm_checksum_82571,
-        .valid_led_default      = e1000_valid_led_default_82571,
-        .validate_nvm           = e1000_validate_nvm_checksum_82571,
-        .write_nvm              = e1000_write_nvm_82571,
-};
-
-static struct e1000_nvm_operations e82573_nvm_ops = {
-        .acquire_nvm            = e1000_acquire_nvm_82571,
         .read_nvm               = e1000e_read_nvm_eerd,
         .release_nvm            = e1000_release_nvm_82571,
         .update_nvm             = e1000_update_nvm_checksum_82571,
@@ -1355,6 +1345,6 @@ struct e1000_info e1000_82573_info = {
         .get_invariants         = e1000_get_invariants_82571,
         .mac_ops                = &e82571_mac_ops,
         .phy_ops                = &e82_phy_ops_m88,
-        .nvm_ops                = &e82573_nvm_ops,
+        .nvm_ops                = &e82571_nvm_ops,
 };
 
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 6232c3e96689..a4f511f549f7 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -66,7 +66,7 @@
 #define E1000_WUFC_ARP  0x00000020 /* ARP Request Packet Wakeup Enable */
 
 /* Extended Device Control */
-#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
+#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */
 #define E1000_CTRL_EXT_EE_RST    0x00002000 /* Reinitialize from EEPROM */
 #define E1000_CTRL_EXT_RO_DIS    0x00020000 /* Relaxed Ordering disable */
 #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
@@ -75,12 +75,12 @@
 #define E1000_CTRL_EXT_IAME           0x08000000 /* Interrupt acknowledge Auto-mask */
 #define E1000_CTRL_EXT_INT_TIMER_CLR  0x20000000 /* Clear Interrupt timers after IMS clear */
 
-/* Receive Decriptor bit definitions */
+/* Receive Descriptor bit definitions */
 #define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
 #define E1000_RXD_STAT_EOP      0x02    /* End of Packet */
 #define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */
 #define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
-#define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum caculated */
+#define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum calculated */
 #define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
 #define E1000_RXD_ERR_CE        0x01    /* CRC Error */
 #define E1000_RXD_ERR_SE        0x02    /* Symbol Error */
@@ -223,7 +223,7 @@
 #define E1000_STATUS_LAN_INIT_DONE 0x00000200   /* Lan Init Completion by NVM */
 #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
 
-/* Constants used to intrepret the masked PCI-X bus speed. */
+/* Constants used to interpret the masked PCI-X bus speed. */
 
 #define HALF_DUPLEX 1
 #define FULL_DUPLEX 2
@@ -517,7 +517,7 @@
 /* PHY 1000 MII Register/Bit Definitions */
 /* PHY Registers defined by IEEE */
 #define PHY_CONTROL      0x00 /* Control Register */
-#define PHY_STATUS       0x01 /* Status Regiser */
+#define PHY_STATUS       0x01 /* Status Register */
 #define PHY_ID1          0x02 /* Phy Id Reg (word 1) */
 #define PHY_ID2          0x03 /* Phy Id Reg (word 2) */
 #define PHY_AUTONEG_ADV  0x04 /* Autoneg Advertisement */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 8b88c226e858..327c0620da31 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -42,8 +42,7 @@
 struct e1000_info;
 
 #define ndev_printk(level, netdev, format, arg...) \
-        printk(level "%s: %s: " format, (netdev)->dev.parent->bus_id, \
-               (netdev)->name, ## arg)
+        printk(level "%s: " format, (netdev)->name, ## arg)
 
 #ifdef DEBUG
 #define ndev_dbg(netdev, format, arg...) \
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 3c5862f97dbf..916025b30fc3 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -184,7 +184,7 @@ enum e1e_registers {
         E1000_ICRXDMTC = 0x04120, /* Irq Cause Rx Desc MinThreshold Count */
         E1000_ICRXOC   = 0x04124, /* Irq Cause Receiver Overrun Count */
         E1000_RXCSUM   = 0x05000, /* RX Checksum Control - RW */
-        E1000_RFCTL    = 0x05008, /* Receive Filter Control*/
+        E1000_RFCTL    = 0x05008, /* Receive Filter Control */
         E1000_MTA      = 0x05200, /* Multicast Table Array - RW Array */
         E1000_RA       = 0x05400, /* Receive Address - RW Array */
         E1000_VFTA     = 0x05600, /* VLAN Filter Table Array - RW Array */
@@ -202,7 +202,7 @@ enum e1e_registers {
         E1000_FACTPS    = 0x05B30, /* Function Active and Power State to MNG */
         E1000_SWSM      = 0x05B50, /* SW Semaphore */
         E1000_FWSM      = 0x05B54, /* FW Semaphore */
-        E1000_HICR      = 0x08F00, /* Host Inteface Control */
+        E1000_HICR      = 0x08F00, /* Host Interface Control */
 };
 
 /* RSS registers */
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 8f8139de1f48..0ae39550768d 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -671,7 +671,7 @@ static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw)
  *  e1000_check_polarity_ife_ich8lan - Check cable polarity for IFE PHY
  *  @hw: pointer to the HW structure
  *
- *  Polarity is determined on the polarity reveral feature being enabled.
+ *  Polarity is determined on the polarity reversal feature being enabled.
  *  This function is only called by other family-specific
  *  routines.
  **/
@@ -947,7 +947,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
         /* Either we should have a hardware SPI cycle in progress
          * bit to check against, in order to start a new cycle or
          * FDONE bit should be changed in the hardware so that it
-         * is 1 after harware reset, which can then be used as an
+         * is 1 after hardware reset, which can then be used as an
          * indication whether a cycle is in progress or has been
          * completed.
          */
@@ -1155,7 +1155,7 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
  *  which writes the checksum to the shadow ram.  The changes in the shadow
  *  ram are then committed to the EEPROM by processing each bank at a time
  *  checking for the modified bit and writing only the pending changes.
- *  After a succesful commit, the shadow ram is cleared and is ready for
+ *  After a successful commit, the shadow ram is cleared and is ready for
  *  future writes.
  **/
 static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
@@ -1680,7 +1680,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
  *   - initialize LED identification
  *   - setup receive address registers
  *   - setup flow control
- *   - setup transmit discriptors
+ *   - setup transmit descriptors
  *   - clear statistics
  **/
 static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
@@ -1961,7 +1961,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
                      E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
         ew32(PHY_CTRL, phy_ctrl);
 
-        /* Call gig speed drop workaround on Giga disable before accessing
+        /* Call gig speed drop workaround on Gig disable before accessing
          * any PHY registers */
         e1000e_gig_downshift_workaround_ich8lan(hw);
 
@@ -1972,7 +1972,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
 /**
  *  e1000_set_kmrn_lock_loss_workaound_ich8lan - Set Kumeran workaround state
  *  @hw: pointer to the HW structure
- *  @state: boolean value used to set the current Kumaran workaround state
+ *  @state: boolean value used to set the current Kumeran workaround state
  *
  *  If ICH8, set the current Kumeran workaround state (enabled - TRUE
  *  /disabled - FALSE).
@@ -2017,7 +2017,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
                         E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
                 ew32(PHY_CTRL, reg);
 
-                /* Call gig speed drop workaround on Giga disable before
+                /* Call gig speed drop workaround on Gig disable before
                  * accessing any PHY registers */
                 if (hw->mac.type == e1000_ich8lan)
                         e1000e_gig_downshift_workaround_ich8lan(hw);
@@ -2045,7 +2045,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
  *  @hw: pointer to the HW structure
  *
  *  Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC),
- *  LPLU, Giga disable, MDIC PHY reset):
+ *  LPLU, Gig disable, MDIC PHY reset):
  *    1) Set Kumeran Near-end loopback
  *    2) Clear Kumeran Near-end loopback
  *  Should only be called for ICH8[m] devices with IGP_3 Phy.
@@ -2089,10 +2089,10 @@ static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw)
 }
 
 /**
- *  e1000_led_on_ich8lan - Turn LED's on
+ *  e1000_led_on_ich8lan - Turn LEDs on
  *  @hw: pointer to the HW structure
  *
- *  Turn on the LED's.
+ *  Turn on the LEDs.
  **/
 static s32 e1000_led_on_ich8lan(struct e1000_hw *hw)
 {
@@ -2105,10 +2105,10 @@ static s32 e1000_led_on_ich8lan(struct e1000_hw *hw)
 }
 
 /**
- *  e1000_led_off_ich8lan - Turn LED's off
+ *  e1000_led_off_ich8lan - Turn LEDs off
  *  @hw: pointer to the HW structure
  *
- *  Turn off the LED's.
+ *  Turn off the LEDs.
  **/
 static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
 {
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 16f35fadb74b..95f75a43c9f9 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -589,9 +589,6 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
         s32 ret_val;
         u16 nvm_data;
 
-        if (mac->fc != e1000_fc_default)
-                return 0;
-
         /* Read and store word 0x0F of the EEPROM. This word contains bits
          * that determine the hardware's default PAUSE (flow control) mode,
          * a bit that determines whether the HW defaults to enabling or
@@ -1107,34 +1104,13 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
                          (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
                         mac->fc = e1000_fc_rx_pause;
                         hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n");
-                }
-                /* Per the IEEE spec, at this point flow control should be
-                 * disabled.  However, we want to consider that we could
-                 * be connected to a legacy switch that doesn't advertise
-                 * desired flow control, but can be forced on the link
-                 * partner.  So if we advertised no flow control, that is
-                 * what we will resolve to.  If we advertised some kind of
-                 * receive capability (Rx Pause Only or Full Flow Control)
-                 * and the link partner advertised none, we will configure
-                 * ourselves to enable Rx Flow Control only.  We can do
-                 * this safely for two reasons:  If the link partner really
-                 * didn't want flow control enabled, and we enable Rx, no
-                 * harm done since we won't be receiving any PAUSE frames
-                 * anyway.  If the intent on the link partner was to have
-                 * flow control enabled, then by us enabling RX only, we
-                 * can at least receive pause frames and process them.
-                 * This is a good idea because in most cases, since we are
-                 * predominantly a server NIC, more times than not we will
-                 * be asked to delay transmission of packets than asking
-                 * our link partner to pause transmission of frames.
-                 */
-                else if ((mac->original_fc == e1000_fc_none) ||
-                         (mac->original_fc == e1000_fc_tx_pause)) {
+                } else {
+                        /*
+                         * Per the IEEE spec, at this point flow control
+                         * should be disabled.
+                         */
                         mac->fc = e1000_fc_none;
                         hw_dbg(hw, "Flow Control = NONE.\r\n");
-                } else {
-                        mac->fc = e1000_fc_rx_pause;
-                        hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n");
                 }
 
                 /* Now we need to do one last check...  If we auto-
@@ -1164,7 +1140,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 }
 
 /**
- *  e1000e_get_speed_and_duplex_copper - Retreive current speed/duplex
+ *  e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex
  *  @hw: pointer to the HW structure
  *  @speed: stores the current speed
  *  @duplex: stores the current duplex
@@ -1200,7 +1176,7 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup
 }
 
 /**
- *  e1000e_get_speed_and_duplex_fiber_serdes - Retreive current speed/duplex
+ *  e1000e_get_speed_and_duplex_fiber_serdes - Retrieve current speed/duplex
  *  @hw: pointer to the HW structure
  *  @speed: stores the current speed
  *  @duplex: stores the current duplex
@@ -1410,7 +1386,7 @@ s32 e1000e_cleanup_led_generic(struct e1000_hw *hw)
  *  e1000e_blink_led - Blink LED
  *  @hw: pointer to the HW structure
  *
- *  Blink the led's which are set to be on.
+ *  Blink the LEDs which are set to be on.
  **/
 s32 e1000e_blink_led(struct e1000_hw *hw)
 {
@@ -1515,7 +1491,7 @@ void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop)
  *  @hw: pointer to the HW structure
  *
  *  Returns 0 if successful, else returns -10
- *  (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not casued
+ *  (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused
  *  the master requests to be disabled.
  *
  *  Disables PCI-Express master access and verifies there are no pending
@@ -1876,7 +1852,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
 }
 
 /**
- *  e1000e_read_nvm_spi - Read EEPROM's using SPI
+ *  e1000e_read_nvm_spi - Reads EEPROM using SPI
  *  @hw: pointer to the HW structure
  *  @offset: offset of word in the EEPROM to read
  *  @words: number of words to read
@@ -1980,7 +1956,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
  *  Writes data to EEPROM at offset using SPI interface.
  *
  *  If e1000e_update_nvm_checksum is not called after this function , the
- *  EEPROM will most likley contain an invalid checksum.
+ *  EEPROM will most likely contain an invalid checksum.
  **/
 s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
@@ -2222,7 +2198,7 @@ static u8 e1000_calculate_checksum(u8 *buffer, u32 length)
  *
  *  Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND
  *
- *  This function checks whether the HOST IF is enabled for command operaton
+ *  This function checks whether the HOST IF is enabled for command operation
  *  and also checks whether the previous command is completed.  It busy waits
  *  in case of previous command is not completed.
  **/
@@ -2254,7 +2230,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
 }
 
 /**
- *  e1000e_check_mng_mode - check managament mode
+ *  e1000e_check_mng_mode - check management mode
  *  @hw: pointer to the HW structure
  *
  *  Reads the firmware semaphore register and returns true (>0) if
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 3031d6d16247..fc5c63f4f578 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1006,7 +1006,7 @@ static void e1000_irq_enable(struct e1000_adapter *adapter)
  * e1000_get_hw_control - get control of the h/w from f/w
  * @adapter: address of board private structure
  *
- * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
+ * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
  * For ASF and Pass Through versions of f/w this means that
  * the driver is loaded. For AMT version (only with 82573)
  * of the f/w this means that the network i/f is open.
@@ -1032,7 +1032,7 @@ static void e1000_get_hw_control(struct e1000_adapter *adapter)
  * e1000_release_hw_control - release control of the h/w to f/w
  * @adapter: address of board private structure
  *
- * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
+ * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
  * For ASF and Pass Through versions of f/w this means that the
  * driver is no longer loaded. For AMT version (only with 82573) i
  * of the f/w this means that the network i/f is closed.
@@ -1241,6 +1241,11 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter)
 
 /**
  * e1000_update_itr - update the dynamic ITR value based on statistics
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ *
  *      Stores a new ITR value based on packets and byte
  *      counts during the last interrupt.  The advantage of per interrupt
  *      computation is faster updates and more accurate ITR for the current
@@ -1250,10 +1255,6 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter)
  *      while increasing bulk throughput.
  *      this functionality is controlled by the InterruptThrottleRate module
  *      parameter (see e1000_param.c)
- * @adapter: pointer to adapter
- * @itr_setting: current adapter->itr
- * @packets: the number of packets during this measurement interval
- * @bytes: the number of bytes during this measurement interval
  **/
 static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
                                      u16 itr_setting, int packets,
@@ -1366,6 +1367,7 @@ set_itr_now:
 /**
  * e1000_clean - NAPI Rx polling callback
  * @adapter: board private structure
+ * @budget: amount of packets driver is allowed to process this poll
  **/
 static int e1000_clean(struct napi_struct *napi, int budget)
 {
@@ -2000,7 +2002,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
             e1000_check_reset_block(hw))
                 return;
 
-        /* managebility (AMT) is enabled */
+        /* manageability (AMT) is enabled */
         if (er32(MANC) & E1000_MANC_SMBUS_EN)
                 return;
 
@@ -3488,7 +3490,6 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 static void e1000e_disable_l1aspm(struct pci_dev *pdev)
 {
         int pos;
-        u32 cap;
         u16 val;
 
         /*
@@ -3503,7 +3504,6 @@ static void e1000e_disable_l1aspm(struct pci_dev *pdev)
          * active.
          */
         pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
-        pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, &cap);
         pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &val);
         if (val & 0x2) {
                 dev_warn(&pdev->dev, "Disabling L1 ASPM\n");
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index fc6fee112f1c..dab3c468a768 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -121,7 +121,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
  *  @offset: register offset to be read
  *  @data: pointer to the read data
  *
- *  Reads the MDI control regsiter in the PHY at offset and stores the
+ *  Reads the MDI control register in the PHY at offset and stores the
  *  information read to data.
  **/
 static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
@@ -1172,7 +1172,7 @@ s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active)
 }
 
 /**
- *  e1000e_check_downshift - Checks whether a downshift in speed occured
+ *  e1000e_check_downshift - Checks whether a downshift in speed occurred
  *  @hw: pointer to the HW structure
  *
  *  Success returns 0, Failure returns 1
@@ -1388,8 +1388,8 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
  *
  *  The automatic gain control (agc) normalizes the amplitude of the
  *  received signal, adjusting for the attenuation produced by the
- *  cable.  By reading the AGC registers, which reperesent the
- *  cobination of course and fine gain value, the value can be put
+ *  cable.  By reading the AGC registers, which represent the
+ *  combination of course and fine gain value, the value can be put
  *  into a lookup table to obtain the approximate cable length
  *  for each channel.
  **/
@@ -1619,7 +1619,7 @@ s32 e1000e_phy_sw_reset(struct e1000_hw *hw)
  *  Verify the reset block is not blocking us from resetting.  Acquire
  *  semaphore (if necessary) and read/set/write the device control reset
  *  bit in the PHY.  Wait the appropriate delay time for the device to
- *  reset and relase the semaphore (if necessary).
+ *  reset and release the semaphore (if necessary).
  **/
 s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
 {
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 88fb53eba715..7c4ead35cfa2 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME        "ehea"
-#define DRV_VERSION     "EHEA_0083"
+#define DRV_VERSION     "EHEA_0087"
 
 /* eHEA capability flags */
 #define DLPAR_PORT_ADD_REM 1
@@ -386,6 +386,13 @@ struct ehea_port_res {
 
 
 #define EHEA_MAX_PORTS 16
+
+#define EHEA_NUM_PORTRES_FW_HANDLES    6  /* QP handle, SendCQ handle,
+                                             RecvCQ handle, EQ handle,
+                                             SendMR handle, RecvMR handle */
+#define EHEA_NUM_PORT_FW_HANDLES       1  /* EQ handle */
+#define EHEA_NUM_ADAPTER_FW_HANDLES    2  /* MR handle, NEQ handle */
+
 struct ehea_adapter {
         u64 handle;
         struct of_device *ofdev;
@@ -405,6 +412,31 @@ struct ehea_mc_list {
         u64 macaddr;
 };
 
+/* kdump support */
+struct ehea_fw_handle_entry {
+        u64 adh;               /* Adapter Handle */
+        u64 fwh;               /* Firmware Handle */
+};
+
+struct ehea_fw_handle_array {
+        struct ehea_fw_handle_entry *arr;
+        int num_entries;
+        struct semaphore lock;
+};
+
+struct ehea_bcmc_reg_entry {
+        u64 adh;               /* Adapter Handle */
+        u32 port_id;           /* Logical Port Id */
+        u8 reg_type;           /* Registration Type */
+        u64 macaddr;
+};
+
+struct ehea_bcmc_reg_array {
+        struct ehea_bcmc_reg_entry *arr;
+        int num_entries;
+        struct semaphore lock;
+};
+
 #define EHEA_PORT_UP 1
 #define EHEA_PORT_DOWN 0
 #define EHEA_PHY_LINK_UP 1
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index c051c7e09b9a..21af674b764e 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -35,6 +35,7 @@
 #include <linux/if_ether.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
+#include <asm/kexec.h>
 
 #include <net/ip.h>
 
@@ -98,8 +99,10 @@ static int port_name_cnt;
 static LIST_HEAD(adapter_list);
 u64 ehea_driver_flags;
 struct work_struct ehea_rereg_mr_task;
-
 struct semaphore dlpar_mem_lock;
+struct ehea_fw_handle_array ehea_fw_handles;
+struct ehea_bcmc_reg_array ehea_bcmc_regs;
+
 
 static int __devinit ehea_probe_adapter(struct of_device *dev,
                                         const struct of_device_id *id);
@@ -132,6 +135,160 @@ void ehea_dump(void *adr, int len, char *msg)
         }
 }
 
+static void ehea_update_firmware_handles(void)
+{
+        struct ehea_fw_handle_entry *arr = NULL;
+        struct ehea_adapter *adapter;
+        int num_adapters = 0;
+        int num_ports = 0;
+        int num_portres = 0;
+        int i = 0;
+        int num_fw_handles, k, l;
+
+        /* Determine number of handles */
+        list_for_each_entry(adapter, &adapter_list, list) {
+                num_adapters++;
+
+                for (k = 0; k < EHEA_MAX_PORTS; k++) {
+                        struct ehea_port *port = adapter->port[k];
+
+                        if (!port || (port->state != EHEA_PORT_UP))
+                                continue;
+
+                        num_ports++;
+                        num_portres += port->num_def_qps + port->num_add_tx_qps;
+                }
+        }
+
+        num_fw_handles = num_adapters * EHEA_NUM_ADAPTER_FW_HANDLES +
+                         num_ports * EHEA_NUM_PORT_FW_HANDLES +
+                         num_portres * EHEA_NUM_PORTRES_FW_HANDLES;
+
+        if (num_fw_handles) {
+                arr = kzalloc(num_fw_handles * sizeof(*arr), GFP_KERNEL);
+                if (!arr)
+                        return;  /* Keep the existing array */
+        } else
+                goto out_update;
+
+        list_for_each_entry(adapter, &adapter_list, list) {
+                for (k = 0; k < EHEA_MAX_PORTS; k++) {
+                        struct ehea_port *port = adapter->port[k];
+
+                        if (!port || (port->state != EHEA_PORT_UP))
+                                continue;
+
+                        for (l = 0;
+                             l < port->num_def_qps + port->num_add_tx_qps;
+                             l++) {
+                                struct ehea_port_res *pr = &port->port_res[l];
+
+                                arr[i].adh = adapter->handle;
+                                arr[i++].fwh = pr->qp->fw_handle;
+                                arr[i].adh = adapter->handle;
+                                arr[i++].fwh = pr->send_cq->fw_handle;
+                                arr[i].adh = adapter->handle;
+                                arr[i++].fwh = pr->recv_cq->fw_handle;
+                                arr[i].adh = adapter->handle;
+                                arr[i++].fwh = pr->eq->fw_handle;
+                                arr[i].adh = adapter->handle;
+                                arr[i++].fwh = pr->send_mr.handle;
+                                arr[i].adh = adapter->handle;
+                                arr[i++].fwh = pr->recv_mr.handle;
+                        }
+                        arr[i].adh = adapter->handle;
+                        arr[i++].fwh = port->qp_eq->fw_handle;
+                }
+
+                arr[i].adh = adapter->handle;
+                arr[i++].fwh = adapter->neq->fw_handle;
+
+                if (adapter->mr.handle) {
+                        arr[i].adh = adapter->handle;
+                        arr[i++].fwh = adapter->mr.handle;
+                }
+        }
+
+out_update:
+        kfree(ehea_fw_handles.arr);
+        ehea_fw_handles.arr = arr;
+        ehea_fw_handles.num_entries = i;
+}
+
+static void ehea_update_bcmc_registrations(void)
+{
+        struct ehea_bcmc_reg_entry *arr = NULL;
+        struct ehea_adapter *adapter;
+        struct ehea_mc_list *mc_entry;
+        int num_registrations = 0;
+        int i = 0;
+        int k;
+
+        /* Determine number of registrations */
+        list_for_each_entry(adapter, &adapter_list, list)
+                for (k = 0; k < EHEA_MAX_PORTS; k++) {
+                        struct ehea_port *port = adapter->port[k];
+
+                        if (!port || (port->state != EHEA_PORT_UP))
+                                continue;
+
+                        num_registrations += 2; /* Broadcast registrations */
+
+                        list_for_each_entry(mc_entry, &port->mc_list->list,list)
+                                num_registrations += 2;
+                }
+
+        if (num_registrations) {
+                arr = kzalloc(num_registrations * sizeof(*arr), GFP_KERNEL);
+                if (!arr)
+                        return;  /* Keep the existing array */
+        } else
+                goto out_update;
+
+        list_for_each_entry(adapter, &adapter_list, list) {
+                for (k = 0; k < EHEA_MAX_PORTS; k++) {
+                        struct ehea_port *port = adapter->port[k];
+
+                        if (!port || (port->state != EHEA_PORT_UP))
+                                continue;
+
+                        arr[i].adh = adapter->handle;
+                        arr[i].port_id = port->logical_port_id;
+                        arr[i].reg_type = EHEA_BCMC_BROADCAST |
+                                          EHEA_BCMC_UNTAGGED;
+                        arr[i++].macaddr = port->mac_addr;
+
+                        arr[i].adh = adapter->handle;
+                        arr[i].port_id = port->logical_port_id;
+                        arr[i].reg_type = EHEA_BCMC_BROADCAST |
+                                          EHEA_BCMC_VLANID_ALL;
+                        arr[i++].macaddr = port->mac_addr;
+
+                        list_for_each_entry(mc_entry,
+                                            &port->mc_list->list, list) {
+                                arr[i].adh = adapter->handle;
+                                arr[i].port_id = port->logical_port_id;
+                                arr[i].reg_type = EHEA_BCMC_SCOPE_ALL |
+                                                  EHEA_BCMC_MULTICAST |
+                                                  EHEA_BCMC_UNTAGGED;
+                                arr[i++].macaddr = mc_entry->macaddr;
+
+                                arr[i].adh = adapter->handle;
+                                arr[i].port_id = port->logical_port_id;
+                                arr[i].reg_type = EHEA_BCMC_SCOPE_ALL |
+                                                  EHEA_BCMC_MULTICAST |
+                                                  EHEA_BCMC_VLANID_ALL;
+                                arr[i++].macaddr = mc_entry->macaddr;
+                        }
+                }
+        }
+
+out_update:
+        kfree(ehea_bcmc_regs.arr);
+        ehea_bcmc_regs.arr = arr;
+        ehea_bcmc_regs.num_entries = i;
+}
+
 static struct net_device_stats *ehea_get_stats(struct net_device *dev)
 {
         struct ehea_port *port = netdev_priv(dev);
@@ -1601,19 +1758,25 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa)
 
         memcpy(dev->dev_addr, mac_addr->sa_data, dev->addr_len);
 
+        down(&ehea_bcmc_regs.lock);
+
         /* Deregister old MAC in pHYP */
         ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
         if (ret)
-                goto out_free;
+                goto out_upregs;
 
         port->mac_addr = cb0->port_mac_addr << 16;
 
         /* Register new MAC in pHYP */
         ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
         if (ret)
-                goto out_free;
+                goto out_upregs;
 
         ret = 0;
+
+out_upregs:
+        ehea_update_bcmc_registrations();
+        up(&ehea_bcmc_regs.lock);
 out_free:
         kfree(cb0);
 out:
@@ -1775,9 +1938,11 @@ static void ehea_set_multicast_list(struct net_device *dev)
         }
         ehea_promiscuous(dev, 0);
 
+        down(&ehea_bcmc_regs.lock);
+
         if (dev->flags & IFF_ALLMULTI) {
                 ehea_allmulti(dev, 1);
-                return;
+                goto out;
         }
         ehea_allmulti(dev, 0);
 
@@ -1803,6 +1968,8 @@ static void ehea_set_multicast_list(struct net_device *dev)
 
         }
 out:
+        ehea_update_bcmc_registrations();
+        up(&ehea_bcmc_regs.lock);
         return;
 }
 
@@ -2285,6 +2452,8 @@ static int ehea_up(struct net_device *dev)
         if (port->state == EHEA_PORT_UP)
                 return 0;
 
+        down(&ehea_fw_handles.lock);
+
         ret = ehea_port_res_setup(port, port->num_def_qps,
                                   port->num_add_tx_qps);
         if (ret) {
@@ -2321,8 +2490,17 @@ static int ehea_up(struct net_device *dev)
                 }
         }
 
-        ret = 0;
+        down(&ehea_bcmc_regs.lock);
+
+        ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
+        if (ret) {
+                ret = -EIO;
+                goto out_free_irqs;
+        }
+
         port->state = EHEA_PORT_UP;
+
+        ret = 0;
         goto out;
 
 out_free_irqs:
@@ -2334,6 +2512,12 @@ out:
         if (ret)
                 ehea_info("Failed starting %s. ret=%i", dev->name, ret);
 
+        ehea_update_bcmc_registrations();
+        up(&ehea_bcmc_regs.lock);
+
+        ehea_update_firmware_handles();
+        up(&ehea_fw_handles.lock);
+
         return ret;
 }
 
@@ -2382,16 +2566,27 @@ static int ehea_down(struct net_device *dev)
         if (port->state == EHEA_PORT_DOWN)
                 return 0;
 
+        down(&ehea_bcmc_regs.lock);
         ehea_drop_multicast_list(dev);
+        ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
+
         ehea_free_interrupts(dev);
 
+        down(&ehea_fw_handles.lock);
+
         port->state = EHEA_PORT_DOWN;
 
+        ehea_update_bcmc_registrations();
+        up(&ehea_bcmc_regs.lock);
+
         ret = ehea_clean_all_portres(port);
         if (ret)
                 ehea_info("Failed freeing resources for %s. ret=%i",
                           dev->name, ret);
 
+        ehea_update_firmware_handles();
+        up(&ehea_fw_handles.lock);
+
         return ret;
 }
 
@@ -2920,19 +3115,12 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,
         dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT;
 
         INIT_WORK(&port->reset_task, ehea_reset_port);
-
-        ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
-        if (ret) {
-                ret = -EIO;
-                goto out_unreg_port;
-        }
-
         ehea_set_ethtool_ops(dev);
 
         ret = register_netdev(dev);
         if (ret) {
                 ehea_error("register_netdev failed. ret=%d", ret);
-                goto out_dereg_bc;
+                goto out_unreg_port;
         }
 
         port->lro_max_aggr = lro_max_aggr;
@@ -2949,9 +3137,6 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,
 
         return port;
 
-out_dereg_bc:
-        ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
-
 out_unreg_port:
         ehea_unregister_port(port);
 
@@ -2971,7 +3156,6 @@ static void ehea_shutdown_single_port(struct ehea_port *port)
 {
         unregister_netdev(port->netdev);
         ehea_unregister_port(port);
-        ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
         kfree(port->mc_list);
         free_netdev(port->netdev);
         port->adapter->active_ports--;
@@ -3014,7 +3198,6 @@ static int ehea_setup_ports(struct ehea_adapter *adapter)
 
                 i++;
         };
-
         return 0;
 }
 
@@ -3159,6 +3342,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
                 ehea_error("Invalid ibmebus device probed");
                 return -EINVAL;
         }
+        down(&ehea_fw_handles.lock);
 
         adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
         if (!adapter) {
@@ -3239,7 +3423,10 @@ out_kill_eq:
 
 out_free_ad:
         kfree(adapter);
+
 out:
+        ehea_update_firmware_handles();
+        up(&ehea_fw_handles.lock);
         return ret;
 }
 
@@ -3258,18 +3445,41 @@ static int __devexit ehea_remove(struct of_device *dev)
 
         flush_scheduled_work();
 
+        down(&ehea_fw_handles.lock);
+
         ibmebus_free_irq(adapter->neq->attr.ist1, adapter);
         tasklet_kill(&adapter->neq_tasklet);
 
         ehea_destroy_eq(adapter->neq);
         ehea_remove_adapter_mr(adapter);
         list_del(&adapter->list);
-
         kfree(adapter);
 
+        ehea_update_firmware_handles();
+        up(&ehea_fw_handles.lock);
+
         return 0;
 }
 
+void ehea_crash_handler(void)
+{
+        int i;
+
+        if (ehea_fw_handles.arr)
+                for (i = 0; i < ehea_fw_handles.num_entries; i++)
+                        ehea_h_free_resource(ehea_fw_handles.arr[i].adh,
+                                             ehea_fw_handles.arr[i].fwh,
+                                             FORCE_FREE);
+
+        if (ehea_bcmc_regs.arr)
+                for (i = 0; i < ehea_bcmc_regs.num_entries; i++)
+                        ehea_h_reg_dereg_bcmc(ehea_bcmc_regs.arr[i].adh,
+                                              ehea_bcmc_regs.arr[i].port_id,
+                                              ehea_bcmc_regs.arr[i].reg_type,
+                                              ehea_bcmc_regs.arr[i].macaddr,
+                                              0, H_DEREG_BCMC);
+}
+
 static int ehea_reboot_notifier(struct notifier_block *nb,
                                 unsigned long action, void *unused)
 {
@@ -3330,7 +3540,12 @@ int __init ehea_module_init(void)
 
 
         INIT_WORK(&ehea_rereg_mr_task, ehea_rereg_mrs);
+        memset(&ehea_fw_handles, 0, sizeof(ehea_fw_handles));
+        memset(&ehea_bcmc_regs, 0, sizeof(ehea_bcmc_regs));
+
         sema_init(&dlpar_mem_lock, 1);
+        sema_init(&ehea_fw_handles.lock, 1);
+        sema_init(&ehea_bcmc_regs.lock, 1);
 
         ret = check_module_parm();
         if (ret)
@@ -3340,12 +3555,18 @@ int __init ehea_module_init(void)
         if (ret)
                 goto out;
 
-        register_reboot_notifier(&ehea_reboot_nb);
+        ret = register_reboot_notifier(&ehea_reboot_nb);
+        if (ret)
+                ehea_info("failed registering reboot notifier");
+
+        ret = crash_shutdown_register(&ehea_crash_handler);
+        if (ret)
+                ehea_info("failed registering crash handler");
 
         ret = ibmebus_register_driver(&ehea_driver);
         if (ret) {
                 ehea_error("failed registering eHEA device driver on ebus");
-                goto out;
+                goto out2;
         }
 
         ret = driver_create_file(&ehea_driver.driver,
@@ -3353,21 +3574,33 @@ int __init ehea_module_init(void)
         if (ret) {
                 ehea_error("failed to register capabilities attribute, ret=%d",
                            ret);
-                unregister_reboot_notifier(&ehea_reboot_nb);
-                ibmebus_unregister_driver(&ehea_driver);
-                goto out;
+                goto out3;
         }
 
+        return ret;
+
+out3:
+        ibmebus_unregister_driver(&ehea_driver);
+out2:
+        unregister_reboot_notifier(&ehea_reboot_nb);
+        crash_shutdown_unregister(&ehea_crash_handler);
 out:
         return ret;
 }
 
 static void __exit ehea_module_exit(void)
 {
+        int ret;
+
         flush_scheduled_work();
         driver_remove_file(&ehea_driver.driver, &driver_attr_capabilities);
         ibmebus_unregister_driver(&ehea_driver);
         unregister_reboot_notifier(&ehea_reboot_nb);
+        ret = crash_shutdown_unregister(&ehea_crash_handler);
+        if (ret)
+                ehea_info("failed unregistering crash handler");
+        kfree(ehea_fw_handles.arr);
+        kfree(ehea_bcmc_regs.arr);
         ehea_destroy_busmap();
 }
 
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 42d94edeee26..af869cf9ae7d 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -946,16 +946,11 @@ static int fs_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
         struct fs_enet_private *fep = netdev_priv(dev);
         struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&rq->ifr_data;
-        unsigned long flags;
-        int rc;
 
         if (!netif_running(dev))
                 return -EINVAL;
 
-        spin_lock_irqsave(&fep->lock, flags);
-        rc = phy_mii_ioctl(fep->phydev, mii, cmd);
-        spin_unlock_irqrestore(&fep->lock, flags);
-        return rc;
+        return phy_mii_ioctl(fep->phydev, mii, cmd);
 }
 
 extern int fs_mii_connect(struct net_device *dev);
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 4244fc282f21..718cf77e345a 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -605,7 +605,7 @@ void stop_gfar(struct net_device *dev)
 
         free_skb_resources(priv);
 
-        dma_free_coherent(NULL,
+        dma_free_coherent(&dev->dev,
                         sizeof(struct txbd8)*priv->tx_ring_size
                         + sizeof(struct rxbd8)*priv->rx_ring_size,
                         priv->tx_bd_base,
@@ -626,7 +626,7 @@ static void free_skb_resources(struct gfar_private *priv)
         for (i = 0; i < priv->tx_ring_size; i++) {
 
                 if (priv->tx_skbuff[i]) {
-                        dma_unmap_single(NULL, txbdp->bufPtr,
+                        dma_unmap_single(&priv->dev->dev, txbdp->bufPtr,
                                         txbdp->length,
                                         DMA_TO_DEVICE);
                         dev_kfree_skb_any(priv->tx_skbuff[i]);
@@ -643,7 +643,7 @@ static void free_skb_resources(struct gfar_private *priv)
         if(priv->rx_skbuff != NULL) {
                 for (i = 0; i < priv->rx_ring_size; i++) {
                         if (priv->rx_skbuff[i]) {
-                                dma_unmap_single(NULL, rxbdp->bufPtr,
+                                dma_unmap_single(&priv->dev->dev, rxbdp->bufPtr,
                                                 priv->rx_buffer_size,
                                                 DMA_FROM_DEVICE);
 
@@ -708,7 +708,7 @@ int startup_gfar(struct net_device *dev)
         gfar_write(&regs->imask, IMASK_INIT_CLEAR);
 
         /* Allocate memory for the buffer descriptors */
-        vaddr = (unsigned long) dma_alloc_coherent(NULL,
+        vaddr = (unsigned long) dma_alloc_coherent(&dev->dev,
                         sizeof (struct txbd8) * priv->tx_ring_size +
                         sizeof (struct rxbd8) * priv->rx_ring_size,
                         &addr, GFP_KERNEL);
@@ -919,7 +919,7 @@ err_irq_fail:
 rx_skb_fail:
         free_skb_resources(priv);
 tx_skb_fail:
-        dma_free_coherent(NULL,
+        dma_free_coherent(&dev->dev,
                         sizeof(struct txbd8)*priv->tx_ring_size
                         + sizeof(struct rxbd8)*priv->rx_ring_size,
                         priv->tx_bd_base,
@@ -1053,7 +1053,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
         /* Set buffer length and pointer */
         txbdp->length = skb->len;
-        txbdp->bufPtr = dma_map_single(NULL, skb->data,
+        txbdp->bufPtr = dma_map_single(&dev->dev, skb->data,
                         skb->len, DMA_TO_DEVICE);
 
         /* Save the skb pointer so we can free it later */
@@ -1332,7 +1332,7 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
          */
         skb_reserve(skb, alignamount);
 
-        bdp->bufPtr = dma_map_single(NULL, skb->data,
+        bdp->bufPtr = dma_map_single(&dev->dev, skb->data,
                         priv->rx_buffer_size, DMA_FROM_DEVICE);
 
         bdp->length = 0;
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index bff280eff5e3..6a1f23092099 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -439,7 +439,7 @@ static int igb_request_irq(struct igb_adapter *adapter)
                 err = igb_request_msix(adapter);
                 if (!err) {
                         /* enable IAM, auto-mask,
-                         * DO NOT USE EIAME or IAME in legacy mode */
+                         * DO NOT USE EIAM or IAM in legacy mode */
                         wr32(E1000_IAM, IMS_ENABLE_MASK);
                         goto request_done;
                 }
@@ -465,14 +465,9 @@ static int igb_request_irq(struct igb_adapter *adapter)
         err = request_irq(adapter->pdev->irq, &igb_intr, IRQF_SHARED,
                           netdev->name, netdev);
 
-        if (err) {
+        if (err)
                 dev_err(&adapter->pdev->dev, "Error %d getting interrupt\n",
                         err);
-                goto request_done;
-        }
-
-        /* enable IAM, auto-mask */
-        wr32(E1000_IAM, IMS_ENABLE_MASK);
 
 request_done:
         return err;
@@ -821,7 +816,8 @@ void igb_reset(struct igb_adapter *adapter)
         wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
 
         igb_reset_adaptive(&adapter->hw);
-        adapter->hw.phy.ops.get_phy_info(&adapter->hw);
+        if (adapter->hw.phy.ops.get_phy_info)
+                adapter->hw.phy.ops.get_phy_info(&adapter->hw);
 }
 
 /**
@@ -2057,7 +2053,8 @@ static void igb_set_multi(struct net_device *netdev)
 static void igb_update_phy_info(unsigned long data)
 {
         struct igb_adapter *adapter = (struct igb_adapter *) data;
-        adapter->hw.phy.ops.get_phy_info(&adapter->hw);
+        if (adapter->hw.phy.ops.get_phy_info)
+                adapter->hw.phy.ops.get_phy_info(&adapter->hw);
 }
 
 /**
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index 53a9fd086f96..75f3a68ee354 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -67,6 +67,7 @@ static struct ixgb_stats ixgb_gstrings_stats[] = {
         {"rx_over_errors", IXGB_STAT(net_stats.rx_over_errors)},
         {"rx_crc_errors", IXGB_STAT(net_stats.rx_crc_errors)},
         {"rx_frame_errors", IXGB_STAT(net_stats.rx_frame_errors)},
+        {"rx_no_buffer_count", IXGB_STAT(stats.rnbc)},
         {"rx_fifo_errors", IXGB_STAT(net_stats.rx_fifo_errors)},
         {"rx_missed_errors", IXGB_STAT(net_stats.rx_missed_errors)},
         {"tx_aborted_errors", IXGB_STAT(net_stats.tx_aborted_errors)},
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 81bf005ff280..1d210ed46130 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -148,7 +148,7 @@ static void macb_handle_link_change(struct net_device *dev)
 
                         if (phydev->duplex)
                                 reg |= MACB_BIT(FD);
-                        if (phydev->speed)
+                        if (phydev->speed == SPEED_100)
                                 reg |= MACB_BIT(SPD);
 
                         macb_writel(bp, NCFGR, reg);
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 6323988dfa1d..fd8158a86f64 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -590,6 +590,13 @@ static int pcnet_config(struct pcmcia_device *link)
         dev->if_port = 0;
     }
 
+    if ((link->conf.ConfigBase == 0x03c0)
+        && (link->manf_id == 0x149) && (link->card_id = 0xc1ab)) {
+        printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n");
+        printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n");
+        goto failed;
+    }
+
     local_hw_info = get_hwinfo(link);
     if (local_hw_info == NULL)
         local_hw_info = get_prom(link);
@@ -1567,12 +1574,11 @@ static struct pcmcia_device_id pcnet_ids[] = {
         PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145),
         PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230),
         PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530),
-/*      PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), conflict with axnet_cs */
+        PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab),
         PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110),
         PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328),
         PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041),
         PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452),
-/*      PCMCIA_DEVICE_MANF_CARD(0x021b, 0x0202), conflict with axnet_cs */
         PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300),
         PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307),
         PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a),
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 6e9f619c491f..963630c65ca9 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -49,13 +49,13 @@ int mdiobus_register(struct mii_bus *bus)
         int i;
         int err = 0;
 
-        mutex_init(&bus->mdio_lock);
-
         if (NULL == bus || NULL == bus->name ||
                         NULL == bus->read ||
                         NULL == bus->write)
                 return -EINVAL;
 
+        mutex_init(&bus->mdio_lock);
+
         if (bus->reset)
                 bus->reset(bus);
 
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 750d2a99cb4f..daf5abab9534 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -2690,6 +2690,7 @@ int gelic_wl_driver_probe(struct gelic_card *card)
                 return -ENOMEM;
 
         /* setup net_device structure */
+        SET_NETDEV_DEV(netdev, &card->dev->core);
         gelic_wl_setup_netdev_ops(netdev);
 
         /* setup some of net_device and register it */
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 202fdf356621..20745fd4e973 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -1633,13 +1633,18 @@ static inline void sis190_init_rxfilter(struct net_device *dev)
 static int __devinit sis190_get_mac_addr(struct pci_dev *pdev, 
                                          struct net_device *dev)
 {
-        u8 from;
+        int rc;
+
+        rc = sis190_get_mac_addr_from_eeprom(pdev, dev);
+        if (rc < 0) {
+                u8 reg;
 
-        pci_read_config_byte(pdev, 0x73, &from);
+                pci_read_config_byte(pdev, 0x73, &reg);
 
-        return (from & 0x00000001) ?
-                sis190_get_mac_addr_from_apc(pdev, dev) :
-                sis190_get_mac_addr_from_eeprom(pdev, dev);
+                if (reg & 0x00000001)
+                        rc = sis190_get_mac_addr_from_apc(pdev, dev);
+        }
+        return rc;
 }
 
 static void sis190_set_speed_auto(struct net_device *dev)
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 9a6295909e43..54c662690f65 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -572,8 +572,9 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
         default:
                 /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
                 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
+
                 /* turn off the Rx LED (LED_RX) */
-                ledover &= ~PHY_M_LED_MO_RX;
+                ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
         }
 
         if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
@@ -602,7 +603,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 
                 if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
                         /* turn on 100 Mbps LED (LED_LINK100) */
-                        ledover |= PHY_M_LED_MO_100;
+                        ledover |= PHY_M_LED_MO_100(MO_LED_ON);
                 }
 
                 if (ledover)
@@ -3322,82 +3323,80 @@ static void sky2_set_multicast(struct net_device *dev)
 /* Can have one global because blinking is controlled by
  * ethtool and that is always under RTNL mutex
  */
-static void sky2_led(struct sky2_hw *hw, unsigned port, int on)
+static void sky2_led(struct sky2_port *sky2, enum led_mode mode)
 {
-        u16 pg;
+        struct sky2_hw *hw = sky2->hw;
+        unsigned port = sky2->port;
 
-        switch (hw->chip_id) {
-        case CHIP_ID_YUKON_XL:
+        spin_lock_bh(&sky2->phy_lock);
+        if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
+            hw->chip_id == CHIP_ID_YUKON_EX ||
+            hw->chip_id == CHIP_ID_YUKON_SUPR) {
+                u16 pg;
                 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
                 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
-                gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
-                             on ? (PHY_M_LEDC_LOS_CTRL(1) |
-                                   PHY_M_LEDC_INIT_CTRL(7) |
-                                   PHY_M_LEDC_STA1_CTRL(7) |
-                                   PHY_M_LEDC_STA0_CTRL(7))
-                             : 0);
 
-                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
-                break;
+                switch (mode) {
+                case MO_LED_OFF:
+                        gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+                                     PHY_M_LEDC_LOS_CTRL(8) |
+                                     PHY_M_LEDC_INIT_CTRL(8) |
+                                     PHY_M_LEDC_STA1_CTRL(8) |
+                                     PHY_M_LEDC_STA0_CTRL(8));
+                        break;
+                case MO_LED_ON:
+                        gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+                                     PHY_M_LEDC_LOS_CTRL(9) |
+                                     PHY_M_LEDC_INIT_CTRL(9) |
+                                     PHY_M_LEDC_STA1_CTRL(9) |
+                                     PHY_M_LEDC_STA0_CTRL(9));
+                        break;
+                case MO_LED_BLINK:
+                        gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+                                     PHY_M_LEDC_LOS_CTRL(0xa) |
+                                     PHY_M_LEDC_INIT_CTRL(0xa) |
+                                     PHY_M_LEDC_STA1_CTRL(0xa) |
+                                     PHY_M_LEDC_STA0_CTRL(0xa));
+                        break;
+                case MO_LED_NORM:
+                        gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+                                     PHY_M_LEDC_LOS_CTRL(1) |
+                                     PHY_M_LEDC_INIT_CTRL(8) |
+                                     PHY_M_LEDC_STA1_CTRL(7) |
+                                     PHY_M_LEDC_STA0_CTRL(7));
+                }
 
-        default:
-                gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+        } else
                 gm_phy_write(hw, port, PHY_MARV_LED_OVER, 
-                             on ? PHY_M_LED_ALL : 0);
-        }
+                                     PHY_M_LED_MO_DUP(mode) |
+                                     PHY_M_LED_MO_10(mode) |
+                                     PHY_M_LED_MO_100(mode) |
+                                     PHY_M_LED_MO_1000(mode) |
+                                     PHY_M_LED_MO_RX(mode) |
+                                     PHY_M_LED_MO_TX(mode));
+
+        spin_unlock_bh(&sky2->phy_lock);
 }
 
 /* blink LED's for finding board */
 static int sky2_phys_id(struct net_device *dev, u32 data)
 {
         struct sky2_port *sky2 = netdev_priv(dev);
-        struct sky2_hw *hw = sky2->hw;
-        unsigned port = sky2->port;
-        u16 ledctrl, ledover = 0;
-        long ms;
-        int interrupted;
-        int onoff = 1;
+        unsigned int i;
 
-        if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ))
-                ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT);
-        else
-                ms = data * 1000;
-
-        /* save initial values */
-        spin_lock_bh(&sky2->phy_lock);
-        if (hw->chip_id == CHIP_ID_YUKON_XL) {
-                u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
-                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
-                ledctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
-                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
-        } else {
-                ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL);
-                ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER);
-        }
-
-        interrupted = 0;
-        while (!interrupted && ms > 0) {
-                sky2_led(hw, port, onoff);
-                onoff = !onoff;
-
-                spin_unlock_bh(&sky2->phy_lock);
-                interrupted = msleep_interruptible(250);
-                spin_lock_bh(&sky2->phy_lock);
-
-                ms -= 250;
-        }
+        if (data == 0)
+                data = UINT_MAX;
 
-        /* resume regularly scheduled programming */
-        if (hw->chip_id == CHIP_ID_YUKON_XL) {
-                u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
-                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
-                gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ledctrl);
-                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
-        } else {
-                gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
-                gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+        for (i = 0; i < data; i++) {
+                sky2_led(sky2, MO_LED_ON);
+                if (msleep_interruptible(500))
+                        break;
+                sky2_led(sky2, MO_LED_OFF);
+                if (msleep_interruptible(500))
+                        break;
         }
-        spin_unlock_bh(&sky2->phy_lock);
+        sky2_led(sky2, MO_LED_NORM);
 
         return 0;
 }
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 5ab5c1c7c5aa..7bb3ba9bcbd8 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1318,18 +1318,21 @@ enum {
         BLINK_670MS     = 4,/* 670 ms */
 };
 
-/**** PHY_MARV_LED_OVER    16 bit r/w LED control */
-enum {
-        PHY_M_LED_MO_DUP  = 3<<10,/* Bit 11..10:  Duplex */
-        PHY_M_LED_MO_10   = 3<<8, /* Bit  9.. 8:  Link 10 */
-        PHY_M_LED_MO_100  = 3<<6, /* Bit  7.. 6:  Link 100 */
-        PHY_M_LED_MO_1000 = 3<<4, /* Bit  5.. 4:  Link 1000 */
-        PHY_M_LED_MO_RX   = 3<<2, /* Bit  3.. 2:  Rx */
-        PHY_M_LED_MO_TX   = 3<<0, /* Bit  1.. 0:  Tx */
-
-        PHY_M_LED_ALL     = PHY_M_LED_MO_DUP | PHY_M_LED_MO_10 
-                            | PHY_M_LED_MO_100 | PHY_M_LED_MO_1000
-                            | PHY_M_LED_MO_RX,
+/*****  PHY_MARV_LED_OVER       16 bit r/w      Manual LED Override Reg *****/
+#define PHY_M_LED_MO_SGMII(x)   ((x)<<14)       /* Bit 15..14:  SGMII AN Timer */
+
+#define PHY_M_LED_MO_DUP(x)     ((x)<<10)       /* Bit 11..10:  Duplex */
+#define PHY_M_LED_MO_10(x)      ((x)<<8)        /* Bit  9.. 8:  Link 10 */
+#define PHY_M_LED_MO_100(x)     ((x)<<6)        /* Bit  7.. 6:  Link 100 */
+#define PHY_M_LED_MO_1000(x)    ((x)<<4)        /* Bit  5.. 4:  Link 1000 */
+#define PHY_M_LED_MO_RX(x)      ((x)<<2)        /* Bit  3.. 2:  Rx */
+#define PHY_M_LED_MO_TX(x)      ((x)<<0)        /* Bit  1.. 0:  Tx */
+
+enum led_mode {
+        MO_LED_NORM  = 0,
+        MO_LED_BLINK = 1,
+        MO_LED_OFF   = 2,
+        MO_LED_ON    = 3,
 };
 
 /*****  PHY_MARV_EXT_CTRL_2     16 bit r/w      Ext. PHY Specific Ctrl 2 *****/
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 3af5b92b48c8..0166407d7061 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -1400,7 +1400,7 @@ static void TLan_SetMulticastList( struct net_device *dev )
          *
          **************************************************************/
 
-u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int )
 {
         /* printk( "TLAN:  Invalid interrupt on %s.\n", dev->name ); */
         return 0;
@@ -1432,7 +1432,7 @@ u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         int             eoc = 0;
@@ -1518,7 +1518,7 @@ u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int )
 {
         TLan_ReadAndClearStats( dev, TLAN_RECORD );
 
@@ -1554,7 +1554,7 @@ u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u32             ack = 0;
@@ -1689,7 +1689,7 @@ u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
 {
         printk( "TLAN:  Test interrupt on %s.\n", dev->name );
         return 1;
@@ -1719,7 +1719,7 @@ u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         TLanList                *head_list;
@@ -1767,7 +1767,7 @@ u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u32             ack;
@@ -1842,7 +1842,7 @@ u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         dma_addr_t      head_list_phys;
@@ -1902,7 +1902,7 @@ u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-void TLan_Timer( unsigned long data )
+static void TLan_Timer( unsigned long data )
 {
         struct net_device       *dev = (struct net_device *) data;
         TLanPrivateInfo *priv = netdev_priv(dev);
@@ -1983,7 +1983,7 @@ void TLan_Timer( unsigned long data )
          *
          **************************************************************/
 
-void TLan_ResetLists( struct net_device *dev )
+static void TLan_ResetLists( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         int             i;
@@ -2043,7 +2043,7 @@ void TLan_ResetLists( struct net_device *dev )
 } /* TLan_ResetLists */
 
 
-void TLan_FreeLists( struct net_device *dev )
+static void TLan_FreeLists( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         int             i;
@@ -2092,7 +2092,7 @@ void TLan_FreeLists( struct net_device *dev )
          *
          **************************************************************/
 
-void TLan_PrintDio( u16 io_base )
+static void TLan_PrintDio( u16 io_base )
 {
         u32 data0, data1;
         int     i;
@@ -2127,7 +2127,7 @@ void TLan_PrintDio( u16 io_base )
          *
          **************************************************************/
 
-void TLan_PrintList( TLanList *list, char *type, int num)
+static void TLan_PrintList( TLanList *list, char *type, int num)
 {
         int i;
 
@@ -2163,7 +2163,7 @@ void TLan_PrintList( TLanList *list, char *type, int num)
          *
          **************************************************************/
 
-void TLan_ReadAndClearStats( struct net_device *dev, int record )
+static void TLan_ReadAndClearStats( struct net_device *dev, int record )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u32             tx_good, tx_under;
@@ -2238,7 +2238,7 @@ void TLan_ReadAndClearStats( struct net_device *dev, int record )
          *
          **************************************************************/
 
-void
+static void
 TLan_ResetAdapter( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
@@ -2324,7 +2324,7 @@ TLan_ResetAdapter( struct net_device *dev )
 
 
 
-void
+static void
 TLan_FinishReset( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
@@ -2448,7 +2448,7 @@ TLan_FinishReset( struct net_device *dev )
          *
          **************************************************************/
 
-void TLan_SetMac( struct net_device *dev, int areg, char *mac )
+static void TLan_SetMac( struct net_device *dev, int areg, char *mac )
 {
         int i;
 
@@ -2490,7 +2490,7 @@ void TLan_SetMac( struct net_device *dev, int areg, char *mac )
          *
          ********************************************************************/
 
-void TLan_PhyPrint( struct net_device *dev )
+static void TLan_PhyPrint( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u16 i, data0, data1, data2, data3, phy;
@@ -2539,7 +2539,7 @@ void TLan_PhyPrint( struct net_device *dev )
          *
          ********************************************************************/
 
-void TLan_PhyDetect( struct net_device *dev )
+static void TLan_PhyDetect( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u16             control;
@@ -2586,7 +2586,7 @@ void TLan_PhyDetect( struct net_device *dev )
 
 
 
-void TLan_PhyPowerDown( struct net_device *dev )
+static void TLan_PhyPowerDown( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u16             value;
@@ -2611,7 +2611,7 @@ void TLan_PhyPowerDown( struct net_device *dev )
 
 
 
-void TLan_PhyPowerUp( struct net_device *dev )
+static void TLan_PhyPowerUp( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u16             value;
@@ -2632,7 +2632,7 @@ void TLan_PhyPowerUp( struct net_device *dev )
 
 
 
-void TLan_PhyReset( struct net_device *dev )
+static void TLan_PhyReset( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u16             phy;
@@ -2660,7 +2660,7 @@ void TLan_PhyReset( struct net_device *dev )
 
 
 
-void TLan_PhyStartLink( struct net_device *dev )
+static void TLan_PhyStartLink( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u16             ability;
@@ -2747,7 +2747,7 @@ void TLan_PhyStartLink( struct net_device *dev )
 
 
 
-void TLan_PhyFinishAutoNeg( struct net_device *dev )
+static void TLan_PhyFinishAutoNeg( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u16             an_adv;
@@ -2903,7 +2903,7 @@ void TLan_PhyMonitor( struct net_device *dev )
          *
          **************************************************************/
 
-int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
+static int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
 {
         u8      nack;
         u16     sio, tmp;
@@ -2993,7 +2993,7 @@ int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
          *
          **************************************************************/
 
-void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
+static void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
 {
         u16 sio;
         u32 i;
@@ -3035,7 +3035,7 @@ void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
          *
          **************************************************************/
 
-void TLan_MiiSync( u16 base_port )
+static void TLan_MiiSync( u16 base_port )
 {
         int i;
         u16 sio;
@@ -3074,7 +3074,7 @@ void TLan_MiiSync( u16 base_port )
          *
          **************************************************************/
 
-void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val )
+static void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val )
 {
         u16     sio;
         int     minten;
@@ -3144,7 +3144,7 @@ void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val )
          *
          **************************************************************/
 
-void TLan_EeSendStart( u16 io_base )
+static void TLan_EeSendStart( u16 io_base )
 {
         u16     sio;
 
@@ -3184,7 +3184,7 @@ void TLan_EeSendStart( u16 io_base )
          *
          **************************************************************/
 
-int TLan_EeSendByte( u16 io_base, u8 data, int stop )
+static int TLan_EeSendByte( u16 io_base, u8 data, int stop )
 {
         int     err;
         u8      place;
@@ -3245,7 +3245,7 @@ int TLan_EeSendByte( u16 io_base, u8 data, int stop )
          *
          **************************************************************/
 
-void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
+static void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
 {
         u8  place;
         u16 sio;
@@ -3303,7 +3303,7 @@ void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
          *
          **************************************************************/
 
-int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data )
+static int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data )
 {
         int err;
         TLanPrivateInfo *priv = netdev_priv(dev);
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index a7afeea156bd..a59c1f224aa8 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -482,9 +482,11 @@ static void uli526x_init(struct net_device *dev)
         struct uli526x_board_info *db = netdev_priv(dev);
         unsigned long ioaddr = db->ioaddr;
         u8      phy_tmp;
+        u8      timeout;
         u16     phy_value;
         u16 phy_reg_reset;
 
+
         ULI526X_DBUG(0, "uli526x_init()", 0);
 
         /* Reset M526x MAC controller */
@@ -509,11 +511,19 @@ static void uli526x_init(struct net_device *dev)
         /* Parser SROM and media mode */
         db->media_mode = uli526x_media_mode;
 
-        /* Phyxcer capability setting */
+        /* phyxcer capability setting */
         phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id);
         phy_reg_reset = (phy_reg_reset | 0x8000);
         phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id);
+
+        /* See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management
+         * functions") or phy data sheet for details on phy reset
+         */
         udelay(500);
+        timeout = 10;
+        while (timeout-- &&
+                phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id) & 0x8000)
+                        udelay(100);
 
         /* Process Phyxcer Media Mode */
         uli526x_set_phyxcer(db);
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 7c851b1e6daa..8c9d6ae2bb31 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -1893,7 +1893,7 @@ static void rhine_shutdown (struct pci_dev *pdev)
 
         /* Make sure we use pattern 0, 1 and not 4, 5 */
         if (rp->quirks & rq6patterns)
-                iowrite8(0x04, ioaddr + 0xA7);
+                iowrite8(0x04, ioaddr + WOLcgClr);
 
         if (rp->wolopts & WAKE_MAGIC) {
                 iowrite8(WOLmagic, ioaddr + WOLcrSet);
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index fdc23678117b..19fd4cb0ddf8 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -361,6 +361,7 @@ static int virtnet_probe(struct virtio_device *vdev)
         netif_napi_add(dev, &vi->napi, virtnet_poll, napi_weight);
         vi->dev = dev;
         vi->vdev = vdev;
+        vdev->priv = vi;
 
         /* We expect two virtqueues, receive then send. */
         vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done);
@@ -395,7 +396,6 @@ static int virtnet_probe(struct virtio_device *vdev)
         }
 
         pr_debug("virtnet: registered device %s\n", dev->name);
-        vdev->priv = vi;
         return 0;
 
 unregister:
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 1a2141dabdc7..8bc4bc4c330e 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -32,6 +32,7 @@ config B43_PCI_AUTOSELECT
         bool
         depends on B43 && SSB_PCIHOST_POSSIBLE
         select SSB_PCIHOST
+        select SSB_B43_PCI_BRIDGE
         default y
 
 # Auto-select SSB PCICORE driver, if possible
diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig
index 6745579ba96d..13c65faf0247 100644
--- a/drivers/net/wireless/b43legacy/Kconfig
+++ b/drivers/net/wireless/b43legacy/Kconfig
@@ -25,6 +25,7 @@ config B43LEGACY_PCI_AUTOSELECT
         bool
         depends on B43LEGACY && SSB_PCIHOST_POSSIBLE
         select SSB_PCIHOST
+        select SSB_B43_PCI_BRIDGE
         default y
 
 # Auto-select SSB PCICORE driver, if possible
diff --git a/drivers/net/wireless/bcm43xx/Kconfig b/drivers/net/wireless/bcm43xx/Kconfig
index 0159701e8456..afb8f4305c24 100644
--- a/drivers/net/wireless/bcm43xx/Kconfig
+++ b/drivers/net/wireless/bcm43xx/Kconfig
@@ -1,6 +1,6 @@
 config BCM43XX
         tristate "Broadcom BCM43xx wireless support (DEPRECATED)"
-        depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && WLAN_80211 && EXPERIMENTAL
+        depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && WLAN_80211 && (!SSB_B43_PCI_BRIDGE || SSB != y) && EXPERIMENTAL
         select WIRELESS_EXT
         select FW_LOADER
         select HW_RANDOM
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index eab020338fde..b3c1acbcc655 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1040,7 +1040,6 @@ int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
         lbs_deb_leave(LBS_DEB_CMD);
         return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_mesh_access);
 
 int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan)
 {
@@ -1576,7 +1575,6 @@ done:
         lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret);
         return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_prepare_and_send_command);
 
 /**
  *  @brief This function allocates the command buffer and link
diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
index aaacd9bd6bd2..4e22341b4f3d 100644
--- a/drivers/net/wireless/libertas/decl.h
+++ b/drivers/net/wireless/libertas/decl.h
@@ -69,7 +69,6 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev);
 int lbs_remove_card(struct lbs_private *priv);
 int lbs_start_card(struct lbs_private *priv);
 int lbs_stop_card(struct lbs_private *priv);
-int lbs_reset_device(struct lbs_private *priv);
 void lbs_host_to_card_done(struct lbs_private *priv);
 
 int lbs_update_channel(struct lbs_private *priv);
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 84fb49ca0fae..4d4e2f3b66ac 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -1351,8 +1351,6 @@ done:
         lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
         return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_add_mesh);
-
 
 static void lbs_remove_mesh(struct lbs_private *priv)
 {
@@ -1372,7 +1370,6 @@ static void lbs_remove_mesh(struct lbs_private *priv)
         free_netdev(mesh_dev);
         lbs_deb_leave(LBS_DEB_MESH);
 }
-EXPORT_SYMBOL_GPL(lbs_remove_mesh);
 
 /**
  *  @brief This function finds the CFP in
@@ -1458,20 +1455,6 @@ void lbs_interrupt(struct lbs_private *priv)
 }
 EXPORT_SYMBOL_GPL(lbs_interrupt);
 
-int lbs_reset_device(struct lbs_private *priv)
-{
-        int ret;
-
-        lbs_deb_enter(LBS_DEB_MAIN);
-        ret = lbs_prepare_and_send_command(priv, CMD_802_11_RESET,
-                                    CMD_ACT_HALT, 0, 0, NULL);
-        msleep_interruptible(10);
-
-        lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
-        return ret;
-}
-EXPORT_SYMBOL_GPL(lbs_reset_device);
-
 static int __init lbs_init_module(void)
 {
         lbs_deb_enter(LBS_DEB_MAIN);
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 8ce2ddf8024f..d9460aed1f22 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -228,9 +228,9 @@ struct NDIS_WLAN_BSSID_EX {
         struct NDIS_802_11_SSID Ssid;
         __le32 Privacy;
         __le32 Rssi;
-        enum NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
+        __le32 NetworkTypeInUse;
         struct NDIS_802_11_CONFIGURATION Configuration;
-        enum NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode;
+        __le32 InfrastructureMode;
         u8 SupportedRates[NDIS_802_11_LENGTH_RATES_EX];
         __le32 IELength;
         u8 IEs[0];
@@ -279,11 +279,11 @@ struct RNDIS_CONFIG_PARAMETER_INFOBUFFER {
 } __attribute__((packed));
 
 /* these have to match what is in wpa_supplicant */
-enum { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP } wpa_alg;
-enum { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP, CIPHER_WEP104 }
-        wpa_cipher;
-enum { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE, KEY_MGMT_802_1X_NO_WPA,
-        KEY_MGMT_WPA_NONE } wpa_key_mgmt;
+enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP };
+enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP,
+                  CIPHER_WEP104 };
+enum wpa_key_mgmt { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE,
+                    KEY_MGMT_802_1X_NO_WPA, KEY_MGMT_WPA_NONE };
 
 /*
  *  private data
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index d6cba138c7ab..c69f85ed7669 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -960,8 +960,12 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev,
                 rt2400pci_disable_radio(rt2x00dev);
                 break;
         case STATE_RADIO_RX_ON:
+        case STATE_RADIO_RX_ON_LINK:
+                rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+                break;
         case STATE_RADIO_RX_OFF:
-                rt2400pci_toggle_rx(rt2x00dev, state);
+        case STATE_RADIO_RX_OFF_LINK:
+                rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
                 break;
         case STATE_DEEP_SLEEP:
         case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index e874fdcae204..91e87b53374f 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1112,8 +1112,12 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
                 rt2500pci_disable_radio(rt2x00dev);
                 break;
         case STATE_RADIO_RX_ON:
+        case STATE_RADIO_RX_ON_LINK:
+                rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+                break;
         case STATE_RADIO_RX_OFF:
-                rt2500pci_toggle_rx(rt2x00dev, state);
+        case STATE_RADIO_RX_OFF_LINK:
+                rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
                 break;
         case STATE_DEEP_SLEEP:
         case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 4ca9730e5e92..638c3d243108 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1001,8 +1001,12 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
                 rt2500usb_disable_radio(rt2x00dev);
                 break;
         case STATE_RADIO_RX_ON:
+        case STATE_RADIO_RX_ON_LINK:
+                rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+                break;
         case STATE_RADIO_RX_OFF:
-                rt2500usb_toggle_rx(rt2x00dev, state);
+        case STATE_RADIO_RX_OFF_LINK:
+                rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
                 break;
         case STATE_DEEP_SLEEP:
         case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 72cfe00c1ed7..07adc576db49 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -97,12 +97,16 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
         libconf.ant.rx = rx;
         libconf.ant.tx = tx;
 
+        if (rx == rt2x00dev->link.ant.active.rx &&
+            tx == rt2x00dev->link.ant.active.tx)
+                return;
+
         /*
          * Antenna setup changes require the RX to be disabled,
          * else the changes will be ignored by the device.
          */
         if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
-                rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
+                rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK);
 
         /*
          * Write new antenna setup to device and reset the link tuner.
@@ -116,7 +120,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
         rt2x00dev->link.ant.active.tx = libconf.ant.tx;
 
         if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
-                rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+                rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
 }
 
 void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index c4be2ac4d7a4..0d51f478bcdf 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -61,11 +61,33 @@ EXPORT_SYMBOL_GPL(rt2x00lib_get_ring);
 /*
  * Link tuning handlers
  */
-static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
+void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev)
 {
+        if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+                return;
+
+        /*
+         * Reset link information.
+         * Both the currently active vgc level as well as
+         * the link tuner counter should be reset. Resetting
+         * the counter is important for devices where the
+         * device should only perform link tuning during the
+         * first minute after being enabled.
+         */
         rt2x00dev->link.count = 0;
         rt2x00dev->link.vgc_level = 0;
 
+        /*
+         * Reset the link tuner.
+         */
+        rt2x00dev->ops->lib->reset_tuner(rt2x00dev);
+}
+
+static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
+{
+        /*
+         * Clear all (possibly) pre-existing quality statistics.
+         */
         memset(&rt2x00dev->link.qual, 0, sizeof(rt2x00dev->link.qual));
 
         /*
@@ -79,10 +101,7 @@ static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
         rt2x00dev->link.qual.rx_percentage = 50;
         rt2x00dev->link.qual.tx_percentage = 50;
 
-        /*
-         * Reset the link tuner.
-         */
-        rt2x00dev->ops->lib->reset_tuner(rt2x00dev);
+        rt2x00lib_reset_link_tuner(rt2x00dev);
 
         queue_delayed_work(rt2x00dev->hw->workqueue,
                            &rt2x00dev->link.work, LINK_TUNE_INTERVAL);
@@ -93,15 +112,6 @@ static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev)
         cancel_delayed_work_sync(&rt2x00dev->link.work);
 }
 
-void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev)
-{
-        if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
-                return;
-
-        rt2x00lib_stop_link_tuner(rt2x00dev);
-        rt2x00lib_start_link_tuner(rt2x00dev);
-}
-
 /*
  * Ring initialization
  */
@@ -260,19 +270,11 @@ static void rt2x00lib_evaluate_antenna_sample(struct rt2x00_dev *rt2x00dev)
         if (sample_a == sample_b)
                 return;
 
-        if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) {
-                if (sample_a > sample_b && rx == ANTENNA_B)
-                        rx = ANTENNA_A;
-                else if (rx == ANTENNA_A)
-                        rx = ANTENNA_B;
-        }
+        if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY)
+                rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B;
 
-        if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) {
-                if (sample_a > sample_b && tx == ANTENNA_B)
-                        tx = ANTENNA_A;
-                else if (tx == ANTENNA_A)
-                        tx = ANTENNA_B;
-        }
+        if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)
+                tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B;
 
         rt2x00lib_config_antenna(rt2x00dev, rx, tx);
 }
@@ -293,7 +295,7 @@ static void rt2x00lib_evaluate_antenna_eval(struct rt2x00_dev *rt2x00dev)
          * sample the rssi from the other antenna to make a valid
          * comparison between the 2 antennas.
          */
-        if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5)
+        if (abs(rssi_curr - rssi_old) < 5)
                 return;
 
         rt2x00dev->link.ant.flags |= ANTENNA_MODE_SAMPLE;
@@ -319,15 +321,15 @@ static void rt2x00lib_evaluate_antenna(struct rt2x00_dev *rt2x00dev)
         rt2x00dev->link.ant.flags &= ~ANTENNA_TX_DIVERSITY;
 
         if (rt2x00dev->hw->conf.antenna_sel_rx == 0 &&
-            rt2x00dev->default_ant.rx != ANTENNA_SW_DIVERSITY)
+            rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
                 rt2x00dev->link.ant.flags |= ANTENNA_RX_DIVERSITY;
         if (rt2x00dev->hw->conf.antenna_sel_tx == 0 &&
-            rt2x00dev->default_ant.tx != ANTENNA_SW_DIVERSITY)
+            rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
                 rt2x00dev->link.ant.flags |= ANTENNA_TX_DIVERSITY;
 
         if (!(rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) &&
             !(rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)) {
-                rt2x00dev->link.ant.flags &= ~ANTENNA_MODE_SAMPLE;
+                rt2x00dev->link.ant.flags = 0;
                 return;
         }
 
@@ -441,17 +443,18 @@ static void rt2x00lib_link_tuner(struct work_struct *work)
                 rt2x00dev->ops->lib->link_tuner(rt2x00dev);
 
         /*
-         * Evaluate antenna setup.
-         */
-        rt2x00lib_evaluate_antenna(rt2x00dev);
-
-        /*
          * Precalculate a portion of the link signal which is
          * in based on the tx/rx success/failure counters.
          */
         rt2x00lib_precalculate_link_signal(&rt2x00dev->link.qual);
 
         /*
+         * Evaluate antenna setup, make this the last step since this could
+         * possibly reset some statistics.
+         */
+        rt2x00lib_evaluate_antenna(rt2x00dev);
+
+        /*
          * Increase tuner counter, and reschedule the next link tuner run.
          */
         rt2x00dev->link.count++;
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 838421216da0..b1915dc7dda1 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -85,6 +85,8 @@ enum dev_state {
         STATE_RADIO_OFF,
         STATE_RADIO_RX_ON,
         STATE_RADIO_RX_OFF,
+        STATE_RADIO_RX_ON_LINK,
+        STATE_RADIO_RX_OFF_LINK,
         STATE_RADIO_IRQ_ON,
         STATE_RADIO_IRQ_OFF,
 };
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index b31f0c26c32b..e808db98f2f5 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1482,8 +1482,12 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
                 rt61pci_disable_radio(rt2x00dev);
                 break;
         case STATE_RADIO_RX_ON:
+        case STATE_RADIO_RX_ON_LINK:
+                rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+                break;
         case STATE_RADIO_RX_OFF:
-                rt61pci_toggle_rx(rt2x00dev, state);
+        case STATE_RADIO_RX_OFF_LINK:
+                rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
                 break;
         case STATE_DEEP_SLEEP:
         case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 4d576ab3e7f9..4fac2d414d84 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1208,8 +1208,12 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
                 rt73usb_disable_radio(rt2x00dev);
                 break;
         case STATE_RADIO_RX_ON:
+        case STATE_RADIO_RX_ON_LINK:
+                rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+                break;
         case STATE_RADIO_RX_OFF:
-                rt73usb_toggle_rx(rt2x00dev, state);
+        case STATE_RADIO_RX_OFF_LINK:
+                rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
                 break;
         case STATE_DEEP_SLEEP:
         case STATE_SLEEP:
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index c3076217871e..d8a5c229c5a7 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -1851,8 +1851,7 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid)
                 }
         }
         /*      See how many write buffers are required to hold this data */
-        numBuffers= ( skb->len + privptr->p_env->write_size - 1) /
-                        ( privptr->p_env->write_size);
+        numBuffers = DIV_ROUND_UP(skb->len, privptr->p_env->write_size);
 
         /*      If that number of buffers isn't available, give up for now */
         if (privptr->write_free_count < numBuffers ||
@@ -2114,8 +2113,7 @@ init_ccw_bk(struct net_device *dev)
         */
         ccw_blocks_perpage= PAGE_SIZE /  CCWBK_SIZE;
         ccw_pages_required=
-                (ccw_blocks_required+ccw_blocks_perpage -1) /
-                         ccw_blocks_perpage;
+                DIV_ROUND_UP(ccw_blocks_required, ccw_blocks_perpage);
 
 #ifdef DEBUGMSG
         printk(KERN_INFO "%s: %s() > ccw_blocks_perpage=%d\n",
@@ -2131,30 +2129,29 @@ init_ccw_bk(struct net_device *dev)
          * provide good performance. With packing buffers support 32k
          * buffers are used.
          */
-        if (privptr->p_env->read_size < PAGE_SIZE) {
-            claw_reads_perpage= PAGE_SIZE / privptr->p_env->read_size;
-            claw_read_pages= (privptr->p_env->read_buffers +
-                claw_reads_perpage -1) / claw_reads_perpage;
+        if (privptr->p_env->read_size < PAGE_SIZE) {
+                claw_reads_perpage = PAGE_SIZE / privptr->p_env->read_size;
+                claw_read_pages = DIV_ROUND_UP(privptr->p_env->read_buffers,
+                                                claw_reads_perpage);
          }
          else {       /* > or equal  */
-            privptr->p_buff_pages_perread=
-                (privptr->p_env->read_size + PAGE_SIZE - 1) / PAGE_SIZE;
-            claw_read_pages=
-                privptr->p_env->read_buffers * privptr->p_buff_pages_perread;
+                privptr->p_buff_pages_perread =
+                        DIV_ROUND_UP(privptr->p_env->read_size, PAGE_SIZE);
+                claw_read_pages = privptr->p_env->read_buffers *
+                                        privptr->p_buff_pages_perread;
          }
         if (privptr->p_env->write_size < PAGE_SIZE) {
-            claw_writes_perpage=
-                PAGE_SIZE / privptr->p_env->write_size;
-            claw_write_pages=
-                (privptr->p_env->write_buffers + claw_writes_perpage -1) /
-                        claw_writes_perpage;
+                claw_writes_perpage =
+                        PAGE_SIZE / privptr->p_env->write_size;
+                claw_write_pages = DIV_ROUND_UP(privptr->p_env->write_buffers,
+                                                claw_writes_perpage);
 
         }
         else {      /* >  or equal  */
-            privptr->p_buff_pages_perwrite=
-                 (privptr->p_env->read_size + PAGE_SIZE - 1) / PAGE_SIZE;
-            claw_write_pages=
-                privptr->p_env->write_buffers * privptr->p_buff_pages_perwrite;
+                privptr->p_buff_pages_perwrite =
+                        DIV_ROUND_UP(privptr->p_env->read_size, PAGE_SIZE);
+                claw_write_pages = privptr->p_env->write_buffers *
+                                        privptr->p_buff_pages_perwrite;
         }
 #ifdef DEBUGMSG
         if (privptr->p_env->read_size < PAGE_SIZE) {
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 9ce12cb2cebc..a8c116b80bff 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -41,6 +41,7 @@
 #include <linux/delay.h>
 #include <linux/console.h>
 #include <linux/platform_device.h>
+#include <linux/serial_sci.h>
 
 #ifdef CONFIG_CPU_FREQ
 #include <linux/notifier.h>
@@ -54,7 +55,6 @@
 #include <asm/kgdb.h>
 #endif
 
-#include <asm/sci.h>
 #include "sh-sci.h"
 
 struct sci_port {
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index 9cfcfd8dad5e..617efb1640b1 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -1,7 +1,7 @@
 /*
  * Core maple bus functionality
  *
- *  Copyright (C) 2007 Adrian McMenamin
+ *  Copyright (C) 2007, 2008 Adrian McMenamin
  *
  * Based on 2.4 code by:
  *
@@ -18,7 +18,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
-#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/io.h>
@@ -54,7 +53,7 @@ static struct device maple_bus;
 static int subdevice_map[MAPLE_PORTS];
 static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr;
 static unsigned long maple_pnp_time;
-static int started, scanning, liststatus, realscan;
+static int started, scanning, liststatus, fullscan;
 static struct kmem_cache *maple_queue_cache;
 
 struct maple_device_specify {
@@ -62,6 +61,9 @@ struct maple_device_specify {
         int unit;
 };
 
+static bool checked[4];
+static struct maple_device *baseunits[4];
+
 /**
  *  maple_driver_register - register a device driver
  *  automatically makes the driver bus a maple bus
@@ -309,11 +311,9 @@ static void maple_attach_driver(struct maple_device *mdev)
                 else
                         break;
 
-        if (realscan) {
-                printk(KERN_INFO "Maple device detected: %s\n",
-                        mdev->product_name);
-                printk(KERN_INFO "Maple device: %s\n", mdev->product_licence);
-        }
+        printk(KERN_INFO "Maple device detected: %s\n",
+                mdev->product_name);
+        printk(KERN_INFO "Maple device: %s\n", mdev->product_licence);
 
         function = be32_to_cpu(mdev->devinfo.function);
 
@@ -323,10 +323,9 @@ static void maple_attach_driver(struct maple_device *mdev)
                 mdev->driver = &maple_dummy_driver;
                 sprintf(mdev->dev.bus_id, "%d:0.port", mdev->port);
         } else {
-                if (realscan)
-                        printk(KERN_INFO
-                                "Maple bus at (%d, %d): Function 0x%lX\n",
-                                mdev->port, mdev->unit, function);
+                printk(KERN_INFO
+                        "Maple bus at (%d, %d): Function 0x%lX\n",
+                        mdev->port, mdev->unit, function);
 
                 matched =
                     bus_for_each_drv(&maple_bus_type, NULL, mdev,
@@ -334,9 +333,8 @@ static void maple_attach_driver(struct maple_device *mdev)
 
                 if (matched == 0) {
                         /* Driver does not exist yet */
-                        if (realscan)
-                                printk(KERN_INFO
-                                        "No maple driver found.\n");
+                        printk(KERN_INFO
+                                "No maple driver found.\n");
                         mdev->driver = &maple_dummy_driver;
                 }
                 sprintf(mdev->dev.bus_id, "%d:0%d.%lX", mdev->port,
@@ -472,9 +470,12 @@ static void maple_response_none(struct maple_device *mdev,
                 maple_detach_driver(mdev);
                 return;
         }
-        if (!started) {
-                printk(KERN_INFO "No maple devices attached to port %d\n",
-                       mdev->port);
+        if (!started || !fullscan) {
+                if (checked[mdev->port] == false) {
+                        checked[mdev->port] = true;
+                        printk(KERN_INFO "No maple devices attached"
+                                " to port %d\n", mdev->port);
+                }
                 return;
         }
         maple_clean_submap(mdev);
@@ -485,8 +486,14 @@ static void maple_response_devinfo(struct maple_device *mdev,
                                    char *recvbuf)
 {
         char submask;
-        if ((!started) || (scanning == 2)) {
-                maple_attach_driver(mdev);
+        if (!started || (scanning == 2) || !fullscan) {
+                if ((mdev->unit == 0) && (checked[mdev->port] == false)) {
+                        checked[mdev->port] = true;
+                        maple_attach_driver(mdev);
+                } else {
+                        if (mdev->unit != 0)
+                                maple_attach_driver(mdev);
+                }
                 return;
         }
         if (mdev->unit == 0) {
@@ -505,6 +512,7 @@ static void maple_dma_handler(struct work_struct *work)
         struct maple_device *dev;
         char *recvbuf;
         enum maple_code code;
+        int i;
 
         if (!maple_dma_done())
                 return;
@@ -557,6 +565,19 @@ static void maple_dma_handler(struct work_struct *work)
                 } else
                         scanning = 0;
 
+                if (!fullscan) {
+                        fullscan = 1;
+                        for (i = 0; i < MAPLE_PORTS; i++) {
+                                if (checked[i] == false) {
+                                        fullscan = 0;
+                                        dev = baseunits[i];
+                                        dev->mq->command =
+                                                MAPLE_COMMAND_DEVINFO;
+                                        dev->mq->length = 0;
+                                        maple_add_packet(dev->mq);
+                                }
+                        }
+                }
                 if (started == 0)
                         started = 1;
         }
@@ -694,7 +715,9 @@ static int __init maple_bus_init(void)
 
         /* setup maple ports */
         for (i = 0; i < MAPLE_PORTS; i++) {
+                checked[i] = false;
                 mdev[i] = maple_alloc_dev(i, 0);
+                baseunits[i] = mdev[i];
                 if (!mdev[i]) {
                         while (i-- > 0)
                                 maple_free_dev(mdev[i]);
@@ -703,12 +726,9 @@ static int __init maple_bus_init(void)
                 mdev[i]->mq->command = MAPLE_COMMAND_DEVINFO;
                 mdev[i]->mq->length = 0;
                 maple_add_packet(mdev[i]->mq);
-                /* delay aids hardware detection */
-                mdelay(5);
                 subdevice_map[i] = 0;
         }
 
-        realscan = 1;
         /* setup maplebus hardware */
         maplebus_dma_reset();
         /* initial detection */
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index 78fd33125e02..adea792fb675 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -35,6 +35,11 @@ config SSB_PCIHOST
 
           If unsure, say Y
 
+config SSB_B43_PCI_BRIDGE
+        bool
+        depends on SSB_PCIHOST
+        default n
+
 config SSB_PCMCIAHOST_POSSIBLE
         bool
         depends on SSB && (PCMCIA = y || PCMCIA = SSB) && EXPERIMENTAL
diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile
index e235144add7c..de94c2eb7a37 100644
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -14,6 +14,6 @@ ssb-$(CONFIG_SSB_DRIVER_PCICORE)	+= driver_pcicore.o
 
 # b43 pci-ssb-bridge driver
 # Not strictly a part of SSB, but kept here for convenience
-ssb-$(CONFIG_SSB_PCIHOST)               += b43_pci_bridge.o
+ssb-$(CONFIG_SSB_B43_PCI_BRIDGE)        += b43_pci_bridge.o
 
 obj-$(CONFIG_SSB)                       += ssb.o
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 6d99a9880055..07ab48d9ceab 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -393,7 +393,7 @@ static int pcicore_is_in_hostmode(struct ssb_pcicore *pc)
             chipid_top != 0x5300)
                 return 0;
 
-        if (bus->sprom.r1.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
+        if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
                 return 0;
 
         /* The 200-pin BCM4712 package does not bond out PCI. Even when
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index a789364264a6..21eca2b5118b 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -120,10 +120,10 @@ extern int ssb_devices_thaw(struct ssb_bus *bus);
 extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
 
 /* b43_pci_bridge.c */
-#ifdef CONFIG_SSB_PCIHOST
+#ifdef CONFIG_SSB_B43_PCI_BRIDGE
 extern int __init b43_pci_ssb_bridge_init(void);
 extern void __exit b43_pci_ssb_bridge_exit(void);
-#else /* CONFIG_SSB_PCIHOST */
+#else /* CONFIG_SSB_B43_PCI_BRIDGR */
 static inline int b43_pci_ssb_bridge_init(void)
 {
         return 0;