diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/pci/Makefile | 3 | ||||
| -rw-r--r-- | drivers/pci/hotplug/cpqphp_core.c | 2 | ||||
| -rw-r--r-- | drivers/pci/hotplug/pciehp.h | 2 | ||||
| -rw-r--r-- | drivers/pci/hotplug/pciehp_core.c | 38 | ||||
| -rw-r--r-- | drivers/pci/hotplug/pciehp_ctrl.c | 64 | ||||
| -rw-r--r-- | drivers/pci/hotplug/pciehp_hpc.c | 43 | ||||
| -rw-r--r-- | drivers/pci/hotplug/pciehp_pci.c | 19 | ||||
| -rw-r--r-- | drivers/pci/hotplug/shpchp.h | 22 | ||||
| -rw-r--r-- | drivers/pci/hotplug/shpchp_core.c | 48 | ||||
| -rw-r--r-- | drivers/pci/hotplug/shpchp_ctrl.c | 158 | ||||
| -rw-r--r-- | drivers/pci/hotplug/shpchp_hpc.c | 113 | ||||
| -rw-r--r-- | drivers/pci/hotplug/shpchp_pci.c | 36 | ||||
| -rw-r--r-- | drivers/pci/irq.c | 60 | ||||
| -rw-r--r-- | drivers/pci/pci.c | 21 | ||||
| -rw-r--r-- | drivers/pci/probe.c | 3 |
15 files changed, 369 insertions, 263 deletions
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 4b47f4ece5b7..af3bfe22847b 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile | |||
| @@ -3,7 +3,8 @@ | |||
| 3 | # | 3 | # |
| 4 | 4 | ||
| 5 | obj-y += access.o bus.o probe.o remove.o pci.o quirks.o slot.o \ | 5 | obj-y += access.o bus.o probe.o remove.o pci.o quirks.o slot.o \ |
| 6 | pci-driver.o search.o pci-sysfs.o rom.o setup-res.o | 6 | pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \ |
| 7 | irq.o | ||
| 7 | obj-$(CONFIG_PROC_FS) += proc.o | 8 | obj-$(CONFIG_PROC_FS) += proc.o |
| 8 | 9 | ||
| 9 | # Build PCI Express stuff if needed | 10 | # Build PCI Express stuff if needed |
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index 724d42c4adbc..8514c3a1746a 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c | |||
| @@ -433,7 +433,7 @@ static int ctrl_slot_setup(struct controller *ctrl, | |||
| 433 | slot->number, ctrl->slot_device_offset, | 433 | slot->number, ctrl->slot_device_offset, |
| 434 | slot_number); | 434 | slot_number); |
| 435 | result = pci_hp_register(hotplug_slot, | 435 | result = pci_hp_register(hotplug_slot, |
| 436 | ctrl->pci_dev->subordinate, | 436 | ctrl->pci_dev->bus, |
| 437 | slot->device, | 437 | slot->device, |
| 438 | name); | 438 | name); |
| 439 | if (result) { | 439 | if (result) { |
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index a4817a841fae..b2801a7ee37f 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h | |||
| @@ -188,7 +188,7 @@ static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device) | |||
| 188 | return slot; | 188 | return slot; |
| 189 | } | 189 | } |
| 190 | 190 | ||
| 191 | ctrl_err(ctrl, "%s: slot (device=0x%x) not found\n", __func__, device); | 191 | ctrl_err(ctrl, "Slot (device=0x%02x) not found\n", device); |
| 192 | return NULL; | 192 | return NULL; |
| 193 | } | 193 | } |
| 194 | 194 | ||
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 62be1b59c74b..4b23bc39b11e 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c | |||
| @@ -184,7 +184,7 @@ static void release_slot(struct hotplug_slot *hotplug_slot) | |||
| 184 | { | 184 | { |
| 185 | struct slot *slot = hotplug_slot->private; | 185 | struct slot *slot = hotplug_slot->private; |
| 186 | 186 | ||
| 187 | ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", | 187 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 188 | __func__, hotplug_slot_name(hotplug_slot)); | 188 | __func__, hotplug_slot_name(hotplug_slot)); |
| 189 | 189 | ||
| 190 | kfree(hotplug_slot->info); | 190 | kfree(hotplug_slot->info); |
| @@ -216,9 +216,11 @@ static int init_slots(struct controller *ctrl) | |||
| 216 | slot->hotplug_slot = hotplug_slot; | 216 | slot->hotplug_slot = hotplug_slot; |
| 217 | snprintf(name, SLOT_NAME_SIZE, "%u", slot->number); | 217 | snprintf(name, SLOT_NAME_SIZE, "%u", slot->number); |
| 218 | 218 | ||
| 219 | ctrl_dbg(ctrl, "Registering bus=%x dev=%x hp_slot=%x sun=%x " | 219 | ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x " |
| 220 | "slot_device_offset=%x\n", slot->bus, slot->device, | 220 | "hp_slot=%x sun=%x slot_device_offset=%x\n", |
| 221 | slot->hp_slot, slot->number, ctrl->slot_device_offset); | 221 | pci_domain_nr(ctrl->pci_dev->subordinate), |
| 222 | slot->bus, slot->device, slot->hp_slot, slot->number, | ||
| 223 | ctrl->slot_device_offset); | ||
| 222 | retval = pci_hp_register(hotplug_slot, | 224 | retval = pci_hp_register(hotplug_slot, |
| 223 | ctrl->pci_dev->subordinate, | 225 | ctrl->pci_dev->subordinate, |
| 224 | slot->device, | 226 | slot->device, |
| @@ -238,7 +240,7 @@ static int init_slots(struct controller *ctrl) | |||
| 238 | &hotplug_slot_attr_lock.attr); | 240 | &hotplug_slot_attr_lock.attr); |
| 239 | if (retval) { | 241 | if (retval) { |
| 240 | pci_hp_deregister(hotplug_slot); | 242 | pci_hp_deregister(hotplug_slot); |
| 241 | ctrl_err(ctrl, "cannot create additional sysfs " | 243 | ctrl_err(ctrl, "Cannot create additional sysfs " |
| 242 | "entries\n"); | 244 | "entries\n"); |
| 243 | goto error_info; | 245 | goto error_info; |
| 244 | } | 246 | } |
| @@ -273,7 +275,7 @@ static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status) | |||
| 273 | { | 275 | { |
| 274 | struct slot *slot = hotplug_slot->private; | 276 | struct slot *slot = hotplug_slot->private; |
| 275 | 277 | ||
| 276 | ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", | 278 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 277 | __func__, slot_name(slot)); | 279 | __func__, slot_name(slot)); |
| 278 | 280 | ||
| 279 | hotplug_slot->info->attention_status = status; | 281 | hotplug_slot->info->attention_status = status; |
| @@ -289,7 +291,7 @@ static int enable_slot(struct hotplug_slot *hotplug_slot) | |||
| 289 | { | 291 | { |
| 290 | struct slot *slot = hotplug_slot->private; | 292 | struct slot *slot = hotplug_slot->private; |
| 291 | 293 | ||
| 292 | ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", | 294 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 293 | __func__, slot_name(slot)); | 295 | __func__, slot_name(slot)); |
| 294 | 296 | ||
| 295 | return pciehp_sysfs_enable_slot(slot); | 297 | return pciehp_sysfs_enable_slot(slot); |
| @@ -300,7 +302,7 @@ static int disable_slot(struct hotplug_slot *hotplug_slot) | |||
| 300 | { | 302 | { |
| 301 | struct slot *slot = hotplug_slot->private; | 303 | struct slot *slot = hotplug_slot->private; |
| 302 | 304 | ||
| 303 | ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", | 305 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 304 | __func__, slot_name(slot)); | 306 | __func__, slot_name(slot)); |
| 305 | 307 | ||
| 306 | return pciehp_sysfs_disable_slot(slot); | 308 | return pciehp_sysfs_disable_slot(slot); |
| @@ -311,7 +313,7 @@ static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) | |||
| 311 | struct slot *slot = hotplug_slot->private; | 313 | struct slot *slot = hotplug_slot->private; |
| 312 | int retval; | 314 | int retval; |
| 313 | 315 | ||
| 314 | ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", | 316 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 315 | __func__, slot_name(slot)); | 317 | __func__, slot_name(slot)); |
| 316 | 318 | ||
| 317 | retval = slot->hpc_ops->get_power_status(slot, value); | 319 | retval = slot->hpc_ops->get_power_status(slot, value); |
| @@ -326,7 +328,7 @@ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) | |||
| 326 | struct slot *slot = hotplug_slot->private; | 328 | struct slot *slot = hotplug_slot->private; |
| 327 | int retval; | 329 | int retval; |
| 328 | 330 | ||
| 329 | ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", | 331 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 330 | __func__, slot_name(slot)); | 332 | __func__, slot_name(slot)); |
| 331 | 333 | ||
| 332 | retval = slot->hpc_ops->get_attention_status(slot, value); | 334 | retval = slot->hpc_ops->get_attention_status(slot, value); |
| @@ -341,7 +343,7 @@ static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value) | |||
| 341 | struct slot *slot = hotplug_slot->private; | 343 | struct slot *slot = hotplug_slot->private; |
| 342 | int retval; | 344 | int retval; |
| 343 | 345 | ||
| 344 | ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", | 346 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 345 | __func__, slot_name(slot)); | 347 | __func__, slot_name(slot)); |
| 346 | 348 | ||
| 347 | retval = slot->hpc_ops->get_latch_status(slot, value); | 349 | retval = slot->hpc_ops->get_latch_status(slot, value); |
| @@ -356,7 +358,7 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) | |||
| 356 | struct slot *slot = hotplug_slot->private; | 358 | struct slot *slot = hotplug_slot->private; |
| 357 | int retval; | 359 | int retval; |
| 358 | 360 | ||
| 359 | ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", | 361 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 360 | __func__, slot_name(slot)); | 362 | __func__, slot_name(slot)); |
| 361 | 363 | ||
| 362 | retval = slot->hpc_ops->get_adapter_status(slot, value); | 364 | retval = slot->hpc_ops->get_adapter_status(slot, value); |
| @@ -372,7 +374,7 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, | |||
| 372 | struct slot *slot = hotplug_slot->private; | 374 | struct slot *slot = hotplug_slot->private; |
| 373 | int retval; | 375 | int retval; |
| 374 | 376 | ||
| 375 | ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", | 377 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 376 | __func__, slot_name(slot)); | 378 | __func__, slot_name(slot)); |
| 377 | 379 | ||
| 378 | retval = slot->hpc_ops->get_max_bus_speed(slot, value); | 380 | retval = slot->hpc_ops->get_max_bus_speed(slot, value); |
| @@ -387,7 +389,7 @@ static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_spe | |||
| 387 | struct slot *slot = hotplug_slot->private; | 389 | struct slot *slot = hotplug_slot->private; |
| 388 | int retval; | 390 | int retval; |
| 389 | 391 | ||
| 390 | ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", | 392 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 391 | __func__, slot_name(slot)); | 393 | __func__, slot_name(slot)); |
| 392 | 394 | ||
| 393 | retval = slot->hpc_ops->get_cur_bus_speed(slot, value); | 395 | retval = slot->hpc_ops->get_cur_bus_speed(slot, value); |
| @@ -414,7 +416,7 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ | |||
| 414 | 416 | ||
| 415 | ctrl = pcie_init(dev); | 417 | ctrl = pcie_init(dev); |
| 416 | if (!ctrl) { | 418 | if (!ctrl) { |
| 417 | dev_err(&dev->device, "controller initialization failed\n"); | 419 | dev_err(&dev->device, "Controller initialization failed\n"); |
| 418 | goto err_out_none; | 420 | goto err_out_none; |
| 419 | } | 421 | } |
| 420 | set_service_data(dev, ctrl); | 422 | set_service_data(dev, ctrl); |
| @@ -423,10 +425,10 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ | |||
| 423 | rc = init_slots(ctrl); | 425 | rc = init_slots(ctrl); |
| 424 | if (rc) { | 426 | if (rc) { |
| 425 | if (rc == -EBUSY) | 427 | if (rc == -EBUSY) |
| 426 | ctrl_warn(ctrl, "slot already registered by another " | 428 | ctrl_warn(ctrl, "Slot already registered by another " |
| 427 | "hotplug driver\n"); | 429 | "hotplug driver\n"); |
| 428 | else | 430 | else |
| 429 | ctrl_err(ctrl, "slot initialization failed\n"); | 431 | ctrl_err(ctrl, "Slot initialization failed\n"); |
| 430 | goto err_out_release_ctlr; | 432 | goto err_out_release_ctlr; |
| 431 | } | 433 | } |
| 432 | 434 | ||
| @@ -523,7 +525,7 @@ static int __init pcied_init(void) | |||
| 523 | dbg("pcie_port_service_register = %d\n", retval); | 525 | dbg("pcie_port_service_register = %d\n", retval); |
| 524 | info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); | 526 | info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); |
| 525 | if (retval) | 527 | if (retval) |
| 526 | dbg("%s: Failure to register service\n", __func__); | 528 | dbg("Failure to register service\n"); |
| 527 | return retval; | 529 | return retval; |
| 528 | } | 530 | } |
| 529 | 531 | ||
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index d6c5eb297753..fead63c6b49e 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c | |||
| @@ -61,7 +61,7 @@ u8 pciehp_handle_attention_button(struct slot *p_slot) | |||
| 61 | struct controller *ctrl = p_slot->ctrl; | 61 | struct controller *ctrl = p_slot->ctrl; |
| 62 | 62 | ||
| 63 | /* Attention Button Change */ | 63 | /* Attention Button Change */ |
| 64 | ctrl_dbg(ctrl, "Attention button interrupt received.\n"); | 64 | ctrl_dbg(ctrl, "Attention button interrupt received\n"); |
| 65 | 65 | ||
| 66 | /* | 66 | /* |
| 67 | * Button pressed - See if need to TAKE ACTION!!! | 67 | * Button pressed - See if need to TAKE ACTION!!! |
| @@ -81,7 +81,7 @@ u8 pciehp_handle_switch_change(struct slot *p_slot) | |||
| 81 | struct controller *ctrl = p_slot->ctrl; | 81 | struct controller *ctrl = p_slot->ctrl; |
| 82 | 82 | ||
| 83 | /* Switch Change */ | 83 | /* Switch Change */ |
| 84 | ctrl_dbg(ctrl, "Switch interrupt received.\n"); | 84 | ctrl_dbg(ctrl, "Switch interrupt received\n"); |
| 85 | 85 | ||
| 86 | p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); | 86 | p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); |
| 87 | if (getstatus) { | 87 | if (getstatus) { |
| @@ -110,7 +110,7 @@ u8 pciehp_handle_presence_change(struct slot *p_slot) | |||
| 110 | struct controller *ctrl = p_slot->ctrl; | 110 | struct controller *ctrl = p_slot->ctrl; |
| 111 | 111 | ||
| 112 | /* Presence Change */ | 112 | /* Presence Change */ |
| 113 | ctrl_dbg(ctrl, "Presence/Notify input change.\n"); | 113 | ctrl_dbg(ctrl, "Presence/Notify input change\n"); |
| 114 | 114 | ||
| 115 | /* Switch is open, assume a presence change | 115 | /* Switch is open, assume a presence change |
| 116 | * Save the presence state | 116 | * Save the presence state |
| @@ -142,7 +142,7 @@ u8 pciehp_handle_power_fault(struct slot *p_slot) | |||
| 142 | struct controller *ctrl = p_slot->ctrl; | 142 | struct controller *ctrl = p_slot->ctrl; |
| 143 | 143 | ||
| 144 | /* power fault */ | 144 | /* power fault */ |
| 145 | ctrl_dbg(ctrl, "Power fault interrupt received.\n"); | 145 | ctrl_dbg(ctrl, "Power fault interrupt received\n"); |
| 146 | 146 | ||
| 147 | if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) { | 147 | if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) { |
| 148 | /* | 148 | /* |
| @@ -157,7 +157,7 @@ u8 pciehp_handle_power_fault(struct slot *p_slot) | |||
| 157 | */ | 157 | */ |
| 158 | ctrl_info(ctrl, "Power fault on Slot(%s)\n", slot_name(p_slot)); | 158 | ctrl_info(ctrl, "Power fault on Slot(%s)\n", slot_name(p_slot)); |
| 159 | event_type = INT_POWER_FAULT; | 159 | event_type = INT_POWER_FAULT; |
| 160 | ctrl_info(ctrl, "power fault bit %x set\n", 0); | 160 | ctrl_info(ctrl, "Power fault bit %x set\n", 0); |
| 161 | } | 161 | } |
| 162 | 162 | ||
| 163 | queue_interrupt_event(p_slot, event_type); | 163 | queue_interrupt_event(p_slot, event_type); |
| @@ -175,8 +175,7 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot) | |||
| 175 | if (POWER_CTRL(ctrl)) { | 175 | if (POWER_CTRL(ctrl)) { |
| 176 | if (pslot->hpc_ops->power_off_slot(pslot)) { | 176 | if (pslot->hpc_ops->power_off_slot(pslot)) { |
| 177 | ctrl_err(ctrl, | 177 | ctrl_err(ctrl, |
| 178 | "%s: Issue of Slot Power Off command failed\n", | 178 | "Issue of Slot Power Off command failed\n"); |
| 179 | __func__); | ||
| 180 | return; | 179 | return; |
| 181 | } | 180 | } |
| 182 | } | 181 | } |
| @@ -193,8 +192,8 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot) | |||
| 193 | 192 | ||
| 194 | if (ATTN_LED(ctrl)) { | 193 | if (ATTN_LED(ctrl)) { |
| 195 | if (pslot->hpc_ops->set_attention_status(pslot, 1)) { | 194 | if (pslot->hpc_ops->set_attention_status(pslot, 1)) { |
| 196 | ctrl_err(ctrl, "%s: Issue of Set Attention " | 195 | ctrl_err(ctrl, |
| 197 | "Led command failed\n", __func__); | 196 | "Issue of Set Attention Led command failed\n"); |
| 198 | return; | 197 | return; |
| 199 | } | 198 | } |
| 200 | } | 199 | } |
| @@ -211,8 +210,9 @@ static int board_added(struct slot *p_slot) | |||
| 211 | { | 210 | { |
| 212 | int retval = 0; | 211 | int retval = 0; |
| 213 | struct controller *ctrl = p_slot->ctrl; | 212 | struct controller *ctrl = p_slot->ctrl; |
| 213 | struct pci_bus *parent = ctrl->pci_dev->subordinate; | ||
| 214 | 214 | ||
| 215 | ctrl_dbg(ctrl, "%s: slot device, slot offset, hp slot = %d, %d ,%d\n", | 215 | ctrl_dbg(ctrl, "%s: slot device, slot offset, hp slot = %d, %d, %d\n", |
| 216 | __func__, p_slot->device, ctrl->slot_device_offset, | 216 | __func__, p_slot->device, ctrl->slot_device_offset, |
| 217 | p_slot->hp_slot); | 217 | p_slot->hp_slot); |
| 218 | 218 | ||
| @@ -229,22 +229,22 @@ static int board_added(struct slot *p_slot) | |||
| 229 | /* Check link training status */ | 229 | /* Check link training status */ |
| 230 | retval = p_slot->hpc_ops->check_lnk_status(ctrl); | 230 | retval = p_slot->hpc_ops->check_lnk_status(ctrl); |
| 231 | if (retval) { | 231 | if (retval) { |
| 232 | ctrl_err(ctrl, "%s: Failed to check link status\n", __func__); | 232 | ctrl_err(ctrl, "Failed to check link status\n"); |
| 233 | set_slot_off(ctrl, p_slot); | 233 | set_slot_off(ctrl, p_slot); |
| 234 | return retval; | 234 | return retval; |
| 235 | } | 235 | } |
| 236 | 236 | ||
| 237 | /* Check for a power fault */ | 237 | /* Check for a power fault */ |
| 238 | if (p_slot->hpc_ops->query_power_fault(p_slot)) { | 238 | if (p_slot->hpc_ops->query_power_fault(p_slot)) { |
| 239 | ctrl_dbg(ctrl, "%s: power fault detected\n", __func__); | 239 | ctrl_dbg(ctrl, "Power fault detected\n"); |
| 240 | retval = POWER_FAILURE; | 240 | retval = POWER_FAILURE; |
| 241 | goto err_exit; | 241 | goto err_exit; |
| 242 | } | 242 | } |
| 243 | 243 | ||
| 244 | retval = pciehp_configure_device(p_slot); | 244 | retval = pciehp_configure_device(p_slot); |
| 245 | if (retval) { | 245 | if (retval) { |
| 246 | ctrl_err(ctrl, "Cannot add device 0x%x:%x\n", | 246 | ctrl_err(ctrl, "Cannot add device at %04x:%02x:%02x\n", |
| 247 | p_slot->bus, p_slot->device); | 247 | pci_domain_nr(parent), p_slot->bus, p_slot->device); |
| 248 | goto err_exit; | 248 | goto err_exit; |
| 249 | } | 249 | } |
| 250 | 250 | ||
| @@ -276,14 +276,14 @@ static int remove_board(struct slot *p_slot) | |||
| 276 | if (retval) | 276 | if (retval) |
| 277 | return retval; | 277 | return retval; |
| 278 | 278 | ||
| 279 | ctrl_dbg(ctrl, "In %s, hp_slot = %d\n", __func__, p_slot->hp_slot); | 279 | ctrl_dbg(ctrl, "%s: hp_slot = %d\n", __func__, p_slot->hp_slot); |
| 280 | 280 | ||
| 281 | if (POWER_CTRL(ctrl)) { | 281 | if (POWER_CTRL(ctrl)) { |
| 282 | /* power off slot */ | 282 | /* power off slot */ |
| 283 | retval = p_slot->hpc_ops->power_off_slot(p_slot); | 283 | retval = p_slot->hpc_ops->power_off_slot(p_slot); |
| 284 | if (retval) { | 284 | if (retval) { |
| 285 | ctrl_err(ctrl, "%s: Issue of Slot Disable command " | 285 | ctrl_err(ctrl, |
| 286 | "failed\n", __func__); | 286 | "Issue of Slot Disable command failed\n"); |
| 287 | return retval; | 287 | return retval; |
| 288 | } | 288 | } |
| 289 | } | 289 | } |
| @@ -324,8 +324,10 @@ static void pciehp_power_thread(struct work_struct *work) | |||
| 324 | switch (p_slot->state) { | 324 | switch (p_slot->state) { |
| 325 | case POWEROFF_STATE: | 325 | case POWEROFF_STATE: |
| 326 | mutex_unlock(&p_slot->lock); | 326 | mutex_unlock(&p_slot->lock); |
| 327 | ctrl_dbg(p_slot->ctrl, "%s: disabling bus:device(%x:%x)\n", | 327 | ctrl_dbg(p_slot->ctrl, |
| 328 | __func__, p_slot->bus, p_slot->device); | 328 | "Disabling domain:bus:device=%04x:%02x:%02x\n", |
| 329 | pci_domain_nr(p_slot->ctrl->pci_dev->subordinate), | ||
| 330 | p_slot->bus, p_slot->device); | ||
| 329 | pciehp_disable_slot(p_slot); | 331 | pciehp_disable_slot(p_slot); |
| 330 | mutex_lock(&p_slot->lock); | 332 | mutex_lock(&p_slot->lock); |
| 331 | p_slot->state = STATIC_STATE; | 333 | p_slot->state = STATIC_STATE; |
| @@ -433,7 +435,6 @@ static void handle_button_press_event(struct slot *p_slot) | |||
| 433 | * expires to cancel hot-add or hot-remove | 435 | * expires to cancel hot-add or hot-remove |
| 434 | */ | 436 | */ |
| 435 | ctrl_info(ctrl, "Button cancel on Slot(%s)\n", slot_name(p_slot)); | 437 | ctrl_info(ctrl, "Button cancel on Slot(%s)\n", slot_name(p_slot)); |
| 436 | ctrl_dbg(ctrl, "%s: button cancel\n", __func__); | ||
| 437 | cancel_delayed_work(&p_slot->work); | 438 | cancel_delayed_work(&p_slot->work); |
| 438 | if (p_slot->state == BLINKINGOFF_STATE) { | 439 | if (p_slot->state == BLINKINGOFF_STATE) { |
| 439 | if (PWR_LED(ctrl)) | 440 | if (PWR_LED(ctrl)) |
| @@ -537,16 +538,15 @@ int pciehp_enable_slot(struct slot *p_slot) | |||
| 537 | 538 | ||
| 538 | rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); | 539 | rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); |
| 539 | if (rc || !getstatus) { | 540 | if (rc || !getstatus) { |
| 540 | ctrl_info(ctrl, "%s: no adapter on slot(%s)\n", | 541 | ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot)); |
| 541 | __func__, slot_name(p_slot)); | ||
| 542 | mutex_unlock(&p_slot->ctrl->crit_sect); | 542 | mutex_unlock(&p_slot->ctrl->crit_sect); |
| 543 | return -ENODEV; | 543 | return -ENODEV; |
| 544 | } | 544 | } |
| 545 | if (MRL_SENS(p_slot->ctrl)) { | 545 | if (MRL_SENS(p_slot->ctrl)) { |
| 546 | rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); | 546 | rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); |
| 547 | if (rc || getstatus) { | 547 | if (rc || getstatus) { |
| 548 | ctrl_info(ctrl, "%s: latch open on slot(%s)\n", | 548 | ctrl_info(ctrl, "Latch open on slot(%s)\n", |
| 549 | __func__, slot_name(p_slot)); | 549 | slot_name(p_slot)); |
| 550 | mutex_unlock(&p_slot->ctrl->crit_sect); | 550 | mutex_unlock(&p_slot->ctrl->crit_sect); |
| 551 | return -ENODEV; | 551 | return -ENODEV; |
| 552 | } | 552 | } |
| @@ -555,8 +555,8 @@ int pciehp_enable_slot(struct slot *p_slot) | |||
| 555 | if (POWER_CTRL(p_slot->ctrl)) { | 555 | if (POWER_CTRL(p_slot->ctrl)) { |
| 556 | rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); | 556 | rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); |
| 557 | if (rc || getstatus) { | 557 | if (rc || getstatus) { |
| 558 | ctrl_info(ctrl, "%s: already enabled on slot(%s)\n", | 558 | ctrl_info(ctrl, "Already enabled on slot(%s)\n", |
| 559 | __func__, slot_name(p_slot)); | 559 | slot_name(p_slot)); |
| 560 | mutex_unlock(&p_slot->ctrl->crit_sect); | 560 | mutex_unlock(&p_slot->ctrl->crit_sect); |
| 561 | return -EINVAL; | 561 | return -EINVAL; |
| 562 | } | 562 | } |
| @@ -591,8 +591,8 @@ int pciehp_disable_slot(struct slot *p_slot) | |||
| 591 | if (!HP_SUPR_RM(p_slot->ctrl)) { | 591 | if (!HP_SUPR_RM(p_slot->ctrl)) { |
| 592 | ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); | 592 | ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); |
| 593 | if (ret || !getstatus) { | 593 | if (ret || !getstatus) { |
| 594 | ctrl_info(ctrl, "%s: no adapter on slot(%s)\n", | 594 | ctrl_info(ctrl, "No adapter on slot(%s)\n", |
| 595 | __func__, slot_name(p_slot)); | 595 | slot_name(p_slot)); |
| 596 | mutex_unlock(&p_slot->ctrl->crit_sect); | 596 | mutex_unlock(&p_slot->ctrl->crit_sect); |
| 597 | return -ENODEV; | 597 | return -ENODEV; |
| 598 | } | 598 | } |
| @@ -601,8 +601,8 @@ int pciehp_disable_slot(struct slot *p_slot) | |||
| 601 | if (MRL_SENS(p_slot->ctrl)) { | 601 | if (MRL_SENS(p_slot->ctrl)) { |
| 602 | ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); | 602 | ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); |
| 603 | if (ret || getstatus) { | 603 | if (ret || getstatus) { |
| 604 | ctrl_info(ctrl, "%s: latch open on slot(%s)\n", | 604 | ctrl_info(ctrl, "Latch open on slot(%s)\n", |
| 605 | __func__, slot_name(p_slot)); | 605 | slot_name(p_slot)); |
| 606 | mutex_unlock(&p_slot->ctrl->crit_sect); | 606 | mutex_unlock(&p_slot->ctrl->crit_sect); |
| 607 | return -ENODEV; | 607 | return -ENODEV; |
| 608 | } | 608 | } |
| @@ -611,8 +611,8 @@ int pciehp_disable_slot(struct slot *p_slot) | |||
| 611 | if (POWER_CTRL(p_slot->ctrl)) { | 611 | if (POWER_CTRL(p_slot->ctrl)) { |
| 612 | ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); | 612 | ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); |
| 613 | if (ret || !getstatus) { | 613 | if (ret || !getstatus) { |
| 614 | ctrl_info(ctrl, "%s: already disabled slot(%s)\n", | 614 | ctrl_info(ctrl, "Already disabled on slot(%s)\n", |
| 615 | __func__, slot_name(p_slot)); | 615 | slot_name(p_slot)); |
| 616 | mutex_unlock(&p_slot->ctrl->crit_sect); | 616 | mutex_unlock(&p_slot->ctrl->crit_sect); |
| 617 | return -EINVAL; | 617 | return -EINVAL; |
| 618 | } | 618 | } |
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 58c72d2cc217..b643ca13e4f1 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c | |||
| @@ -316,22 +316,19 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) | |||
| 316 | * proceed forward to issue the next command according | 316 | * proceed forward to issue the next command according |
| 317 | * to spec. Just print out the error message. | 317 | * to spec. Just print out the error message. |
| 318 | */ | 318 | */ |
| 319 | ctrl_dbg(ctrl, | 319 | ctrl_dbg(ctrl, "CMD_COMPLETED not clear after 1 sec\n"); |
| 320 | "%s: CMD_COMPLETED not clear after 1 sec.\n", | ||
| 321 | __func__); | ||
| 322 | } else if (!NO_CMD_CMPL(ctrl)) { | 320 | } else if (!NO_CMD_CMPL(ctrl)) { |
| 323 | /* | 321 | /* |
| 324 | * This controller semms to notify of command completed | 322 | * This controller semms to notify of command completed |
| 325 | * event even though it supports none of power | 323 | * event even though it supports none of power |
| 326 | * controller, attention led, power led and EMI. | 324 | * controller, attention led, power led and EMI. |
| 327 | */ | 325 | */ |
| 328 | ctrl_dbg(ctrl, "%s: Unexpected CMD_COMPLETED. Need to " | 326 | ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Need to " |
| 329 | "wait for command completed event.\n", | 327 | "wait for command completed event.\n"); |
| 330 | __func__); | ||
| 331 | ctrl->no_cmd_complete = 0; | 328 | ctrl->no_cmd_complete = 0; |
| 332 | } else { | 329 | } else { |
| 333 | ctrl_dbg(ctrl, "%s: Unexpected CMD_COMPLETED. Maybe " | 330 | ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Maybe " |
| 334 | "the controller is broken.\n", __func__); | 331 | "the controller is broken.\n"); |
| 335 | } | 332 | } |
| 336 | } | 333 | } |
| 337 | 334 | ||
| @@ -347,8 +344,7 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) | |||
| 347 | smp_mb(); | 344 | smp_mb(); |
| 348 | retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl); | 345 | retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl); |
| 349 | if (retval) | 346 | if (retval) |
| 350 | ctrl_err(ctrl, "%s: Cannot write to SLOTCTRL register\n", | 347 | ctrl_err(ctrl, "Cannot write to SLOTCTRL register\n"); |
| 351 | __func__); | ||
| 352 | 348 | ||
| 353 | /* | 349 | /* |
| 354 | * Wait for command completion. | 350 | * Wait for command completion. |
| @@ -418,15 +414,14 @@ static int hpc_check_lnk_status(struct controller *ctrl) | |||
| 418 | 414 | ||
| 419 | retval = pciehp_readw(ctrl, LNKSTATUS, &lnk_status); | 415 | retval = pciehp_readw(ctrl, LNKSTATUS, &lnk_status); |
| 420 | if (retval) { | 416 | if (retval) { |
| 421 | ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n", | 417 | ctrl_err(ctrl, "Cannot read LNKSTATUS register\n"); |
| 422 | __func__); | ||
| 423 | return retval; | 418 | return retval; |
| 424 | } | 419 | } |
| 425 | 420 | ||
| 426 | ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status); | 421 | ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status); |
| 427 | if ( (lnk_status & LNK_TRN) || (lnk_status & LNK_TRN_ERR) || | 422 | if ( (lnk_status & LNK_TRN) || (lnk_status & LNK_TRN_ERR) || |
| 428 | !(lnk_status & NEG_LINK_WD)) { | 423 | !(lnk_status & NEG_LINK_WD)) { |
| 429 | ctrl_err(ctrl, "%s : Link Training Error occurs \n", __func__); | 424 | ctrl_err(ctrl, "Link Training Error occurs \n"); |
| 430 | retval = -1; | 425 | retval = -1; |
| 431 | return retval; | 426 | return retval; |
| 432 | } | 427 | } |
| @@ -551,7 +546,7 @@ static int hpc_query_power_fault(struct slot *slot) | |||
| 551 | 546 | ||
| 552 | retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status); | 547 | retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status); |
| 553 | if (retval) { | 548 | if (retval) { |
| 554 | ctrl_err(ctrl, "%s: Cannot check for power fault\n", __func__); | 549 | ctrl_err(ctrl, "Cannot check for power fault\n"); |
| 555 | return retval; | 550 | return retval; |
| 556 | } | 551 | } |
| 557 | pwr_fault = (u8)((slot_status & PWR_FAULT_DETECTED) >> 1); | 552 | pwr_fault = (u8)((slot_status & PWR_FAULT_DETECTED) >> 1); |
| @@ -567,7 +562,7 @@ static int hpc_get_emi_status(struct slot *slot, u8 *status) | |||
| 567 | 562 | ||
| 568 | retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status); | 563 | retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status); |
| 569 | if (retval) { | 564 | if (retval) { |
| 570 | ctrl_err(ctrl, "%s : Cannot check EMI status\n", __func__); | 565 | ctrl_err(ctrl, "Cannot check EMI status\n"); |
| 571 | return retval; | 566 | return retval; |
| 572 | } | 567 | } |
| 573 | *status = (slot_status & EMI_STATE) >> EMI_STATUS_BIT; | 568 | *status = (slot_status & EMI_STATE) >> EMI_STATUS_BIT; |
| @@ -697,8 +692,7 @@ static int hpc_power_on_slot(struct slot * slot) | |||
| 697 | retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask); | 692 | retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask); |
| 698 | 693 | ||
| 699 | if (retval) { | 694 | if (retval) { |
| 700 | ctrl_err(ctrl, "%s: Write %x command failed!\n", | 695 | ctrl_err(ctrl, "Write %x command failed!\n", slot_cmd); |
| 701 | __func__, slot_cmd); | ||
| 702 | return -1; | 696 | return -1; |
| 703 | } | 697 | } |
| 704 | ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", | 698 | ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", |
| @@ -776,7 +770,7 @@ static int hpc_power_off_slot(struct slot * slot) | |||
| 776 | 770 | ||
| 777 | retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask); | 771 | retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask); |
| 778 | if (retval) { | 772 | if (retval) { |
| 779 | ctrl_err(ctrl, "%s: Write command failed!\n", __func__); | 773 | ctrl_err(ctrl, "Write command failed!\n"); |
| 780 | retval = -1; | 774 | retval = -1; |
| 781 | goto out; | 775 | goto out; |
| 782 | } | 776 | } |
| @@ -1056,8 +1050,7 @@ int pcie_enable_notification(struct controller *ctrl) | |||
| 1056 | PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE; | 1050 | PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE; |
| 1057 | 1051 | ||
| 1058 | if (pcie_write_cmd(ctrl, cmd, mask)) { | 1052 | if (pcie_write_cmd(ctrl, cmd, mask)) { |
| 1059 | ctrl_err(ctrl, "%s: Cannot enable software notification\n", | 1053 | ctrl_err(ctrl, "Cannot enable software notification\n"); |
| 1060 | __func__); | ||
| 1061 | return -1; | 1054 | return -1; |
| 1062 | } | 1055 | } |
| 1063 | return 0; | 1056 | return 0; |
| @@ -1069,8 +1062,7 @@ static void pcie_disable_notification(struct controller *ctrl) | |||
| 1069 | mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | MRL_DETECT_ENABLE | | 1062 | mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | MRL_DETECT_ENABLE | |
| 1070 | PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE; | 1063 | PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE; |
| 1071 | if (pcie_write_cmd(ctrl, 0, mask)) | 1064 | if (pcie_write_cmd(ctrl, 0, mask)) |
| 1072 | ctrl_warn(ctrl, "%s: Cannot disable software notification\n", | 1065 | ctrl_warn(ctrl, "Cannot disable software notification\n"); |
| 1073 | __func__); | ||
| 1074 | } | 1066 | } |
| 1075 | 1067 | ||
| 1076 | static int pcie_init_notification(struct controller *ctrl) | 1068 | static int pcie_init_notification(struct controller *ctrl) |
| @@ -1179,7 +1171,7 @@ struct controller *pcie_init(struct pcie_device *dev) | |||
| 1179 | 1171 | ||
| 1180 | ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); | 1172 | ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); |
| 1181 | if (!ctrl) { | 1173 | if (!ctrl) { |
| 1182 | dev_err(&dev->device, "%s : out of memory\n", __func__); | 1174 | dev_err(&dev->device, "%s: Out of memory\n", __func__); |
| 1183 | goto abort; | 1175 | goto abort; |
| 1184 | } | 1176 | } |
| 1185 | INIT_LIST_HEAD(&ctrl->slot_list); | 1177 | INIT_LIST_HEAD(&ctrl->slot_list); |
| @@ -1188,12 +1180,11 @@ struct controller *pcie_init(struct pcie_device *dev) | |||
| 1188 | ctrl->pci_dev = pdev; | 1180 | ctrl->pci_dev = pdev; |
| 1189 | ctrl->cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP); | 1181 | ctrl->cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP); |
| 1190 | if (!ctrl->cap_base) { | 1182 | if (!ctrl->cap_base) { |
| 1191 | ctrl_err(ctrl, "%s: Cannot find PCI Express capability\n", | 1183 | ctrl_err(ctrl, "Cannot find PCI Express capability\n"); |
| 1192 | __func__); | ||
| 1193 | goto abort_ctrl; | 1184 | goto abort_ctrl; |
| 1194 | } | 1185 | } |
| 1195 | if (pciehp_readl(ctrl, SLOTCAP, &slot_cap)) { | 1186 | if (pciehp_readl(ctrl, SLOTCAP, &slot_cap)) { |
| 1196 | ctrl_err(ctrl, "%s: Cannot read SLOTCAP register\n", __func__); | 1187 | ctrl_err(ctrl, "Cannot read SLOTCAP register\n"); |
| 1197 | goto abort_ctrl; | 1188 | goto abort_ctrl; |
| 1198 | } | 1189 | } |
| 1199 | 1190 | ||
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c index ffd11148fbe2..10f9566cceeb 100644 --- a/drivers/pci/hotplug/pciehp_pci.c +++ b/drivers/pci/hotplug/pciehp_pci.c | |||
| @@ -39,8 +39,7 @@ static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp) | |||
| 39 | u16 pci_cmd, pci_bctl; | 39 | u16 pci_cmd, pci_bctl; |
| 40 | 40 | ||
| 41 | if (hpp->revision > 1) { | 41 | if (hpp->revision > 1) { |
| 42 | printk(KERN_WARNING "%s: Rev.%d type0 record not supported\n", | 42 | warn("Rev.%d type0 record not supported\n", hpp->revision); |
| 43 | __func__, hpp->revision); | ||
| 44 | return; | 43 | return; |
| 45 | } | 44 | } |
| 46 | 45 | ||
| @@ -81,8 +80,7 @@ static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp) | |||
| 81 | u32 reg32; | 80 | u32 reg32; |
| 82 | 81 | ||
| 83 | if (hpp->revision > 1) { | 82 | if (hpp->revision > 1) { |
| 84 | printk(KERN_WARNING "%s: Rev.%d type2 record not supported\n", | 83 | warn("Rev.%d type2 record not supported\n", hpp->revision); |
| 85 | __func__, hpp->revision); | ||
| 86 | return; | 84 | return; |
| 87 | } | 85 | } |
| 88 | 86 | ||
| @@ -149,8 +147,7 @@ static void program_fw_provided_values(struct pci_dev *dev) | |||
| 149 | return; | 147 | return; |
| 150 | 148 | ||
| 151 | if (pciehp_get_hp_params_from_firmware(dev, &hpp)) { | 149 | if (pciehp_get_hp_params_from_firmware(dev, &hpp)) { |
| 152 | printk(KERN_WARNING "%s: Could not get hotplug parameters\n", | 150 | warn("Could not get hotplug parameters\n"); |
| 153 | __func__); | ||
| 154 | return; | 151 | return; |
| 155 | } | 152 | } |
| 156 | 153 | ||
| @@ -202,9 +199,9 @@ int pciehp_configure_device(struct slot *p_slot) | |||
| 202 | 199 | ||
| 203 | dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0)); | 200 | dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0)); |
| 204 | if (dev) { | 201 | if (dev) { |
| 205 | ctrl_err(ctrl, | 202 | ctrl_err(ctrl, "Device %s already exists " |
| 206 | "Device %s already exists at %x:%x, cannot hot-add\n", | 203 | "at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev), |
| 207 | pci_name(dev), p_slot->bus, p_slot->device); | 204 | pci_domain_nr(parent), p_slot->bus, p_slot->device); |
| 208 | pci_dev_put(dev); | 205 | pci_dev_put(dev); |
| 209 | return -EINVAL; | 206 | return -EINVAL; |
| 210 | } | 207 | } |
| @@ -248,8 +245,8 @@ int pciehp_unconfigure_device(struct slot *p_slot) | |||
| 248 | u16 command; | 245 | u16 command; |
| 249 | struct controller *ctrl = p_slot->ctrl; | 246 | struct controller *ctrl = p_slot->ctrl; |
| 250 | 247 | ||
| 251 | ctrl_dbg(ctrl, "%s: bus/dev = %x/%x\n", __func__, | 248 | ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:%02x\n", |
| 252 | p_slot->bus, p_slot->device); | 249 | __func__, pci_domain_nr(parent), p_slot->bus, p_slot->device); |
| 253 | ret = p_slot->hpc_ops->get_adapter_status(p_slot, &presence); | 250 | ret = p_slot->hpc_ops->get_adapter_status(p_slot, &presence); |
| 254 | if (ret) | 251 | if (ret) |
| 255 | presence = 0; | 252 | presence = 0; |
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 4d9fed00e1d0..6aba0b6cf2e0 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h | |||
| @@ -59,6 +59,20 @@ extern struct workqueue_struct *shpchp_wq; | |||
| 59 | #define warn(format, arg...) \ | 59 | #define warn(format, arg...) \ |
| 60 | printk(KERN_WARNING "%s: " format, MY_NAME , ## arg) | 60 | printk(KERN_WARNING "%s: " format, MY_NAME , ## arg) |
| 61 | 61 | ||
| 62 | #define ctrl_dbg(ctrl, format, arg...) \ | ||
| 63 | do { \ | ||
| 64 | if (shpchp_debug) \ | ||
| 65 | dev_printk(, &ctrl->pci_dev->dev, \ | ||
| 66 | format, ## arg); \ | ||
| 67 | } while (0) | ||
| 68 | #define ctrl_err(ctrl, format, arg...) \ | ||
| 69 | dev_err(&ctrl->pci_dev->dev, format, ## arg) | ||
| 70 | #define ctrl_info(ctrl, format, arg...) \ | ||
| 71 | dev_info(&ctrl->pci_dev->dev, format, ## arg) | ||
| 72 | #define ctrl_warn(ctrl, format, arg...) \ | ||
| 73 | dev_warn(&ctrl->pci_dev->dev, format, ## arg) | ||
| 74 | |||
| 75 | |||
| 62 | #define SLOT_NAME_SIZE 10 | 76 | #define SLOT_NAME_SIZE 10 |
| 63 | struct slot { | 77 | struct slot { |
| 64 | u8 bus; | 78 | u8 bus; |
| @@ -239,7 +253,7 @@ static inline struct slot *shpchp_find_slot(struct controller *ctrl, u8 device) | |||
| 239 | return slot; | 253 | return slot; |
| 240 | } | 254 | } |
| 241 | 255 | ||
| 242 | err("%s: slot (device=0x%x) not found\n", __func__, device); | 256 | ctrl_err(ctrl, "Slot (device=0x%02x) not found\n", device); |
| 243 | return NULL; | 257 | return NULL; |
| 244 | } | 258 | } |
| 245 | 259 | ||
| @@ -273,7 +287,9 @@ static inline void amd_pogo_errata_restore_misc_reg(struct slot *p_slot) | |||
| 273 | pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, &pcix_bridge_errors_reg); | 287 | pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, &pcix_bridge_errors_reg); |
| 274 | perr_set = pcix_bridge_errors_reg & PERR_OBSERVED_MASK; | 288 | perr_set = pcix_bridge_errors_reg & PERR_OBSERVED_MASK; |
| 275 | if (perr_set) { | 289 | if (perr_set) { |
| 276 | dbg ("%s W1C: Bridge_Errors[ PERR_OBSERVED = %08X]\n",__func__ , perr_set); | 290 | ctrl_dbg(p_slot->ctrl, |
| 291 | "Bridge_Errors[ PERR_OBSERVED = %08X] (W1C)\n", | ||
| 292 | perr_set); | ||
| 277 | 293 | ||
| 278 | pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, perr_set); | 294 | pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, perr_set); |
| 279 | } | 295 | } |
| @@ -282,7 +298,7 @@ static inline void amd_pogo_errata_restore_misc_reg(struct slot *p_slot) | |||
| 282 | pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, &pcix_mem_base_reg); | 298 | pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, &pcix_mem_base_reg); |
| 283 | rse_set = pcix_mem_base_reg & RSE_MASK; | 299 | rse_set = pcix_mem_base_reg & RSE_MASK; |
| 284 | if (rse_set) { | 300 | if (rse_set) { |
| 285 | dbg ("%s W1C: Memory_Base_Limit[ RSE ]\n",__func__ ); | 301 | ctrl_dbg(p_slot->ctrl, "Memory_Base_Limit[ RSE ] (W1C)\n"); |
| 286 | 302 | ||
| 287 | pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, rse_set); | 303 | pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, rse_set); |
| 288 | } | 304 | } |
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 7af9191df4d6..fe8d149c2293 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c | |||
| @@ -89,7 +89,8 @@ static void release_slot(struct hotplug_slot *hotplug_slot) | |||
| 89 | { | 89 | { |
| 90 | struct slot *slot = hotplug_slot->private; | 90 | struct slot *slot = hotplug_slot->private; |
| 91 | 91 | ||
| 92 | dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); | 92 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 93 | __func__, slot_name(slot)); | ||
| 93 | 94 | ||
| 94 | kfree(slot->hotplug_slot->info); | 95 | kfree(slot->hotplug_slot->info); |
| 95 | kfree(slot->hotplug_slot); | 96 | kfree(slot->hotplug_slot); |
| @@ -135,13 +136,16 @@ static int init_slots(struct controller *ctrl) | |||
| 135 | snprintf(name, SLOT_NAME_SIZE, "%d", slot->number); | 136 | snprintf(name, SLOT_NAME_SIZE, "%d", slot->number); |
| 136 | hotplug_slot->ops = &shpchp_hotplug_slot_ops; | 137 | hotplug_slot->ops = &shpchp_hotplug_slot_ops; |
| 137 | 138 | ||
| 138 | dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x " | 139 | ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x " |
| 139 | "slot_device_offset=%x\n", slot->bus, slot->device, | 140 | "hp_slot=%x sun=%x slot_device_offset=%x\n", |
| 140 | slot->hp_slot, slot->number, ctrl->slot_device_offset); | 141 | pci_domain_nr(ctrl->pci_dev->subordinate), |
| 142 | slot->bus, slot->device, slot->hp_slot, slot->number, | ||
| 143 | ctrl->slot_device_offset); | ||
| 141 | retval = pci_hp_register(slot->hotplug_slot, | 144 | retval = pci_hp_register(slot->hotplug_slot, |
| 142 | ctrl->pci_dev->subordinate, slot->device, name); | 145 | ctrl->pci_dev->subordinate, slot->device, name); |
| 143 | if (retval) { | 146 | if (retval) { |
| 144 | err("pci_hp_register failed with error %d\n", retval); | 147 | ctrl_err(ctrl, "pci_hp_register failed with error %d\n", |
| 148 | retval); | ||
| 145 | goto error_info; | 149 | goto error_info; |
| 146 | } | 150 | } |
| 147 | 151 | ||
| @@ -187,7 +191,8 @@ static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status) | |||
| 187 | { | 191 | { |
| 188 | struct slot *slot = get_slot(hotplug_slot); | 192 | struct slot *slot = get_slot(hotplug_slot); |
| 189 | 193 | ||
| 190 | dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); | 194 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 195 | __func__, slot_name(slot)); | ||
| 191 | 196 | ||
| 192 | hotplug_slot->info->attention_status = status; | 197 | hotplug_slot->info->attention_status = status; |
| 193 | slot->hpc_ops->set_attention_status(slot, status); | 198 | slot->hpc_ops->set_attention_status(slot, status); |
| @@ -199,7 +204,8 @@ static int enable_slot (struct hotplug_slot *hotplug_slot) | |||
| 199 | { | 204 | { |
| 200 | struct slot *slot = get_slot(hotplug_slot); | 205 | struct slot *slot = get_slot(hotplug_slot); |
| 201 | 206 | ||
| 202 | dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); | 207 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 208 | __func__, slot_name(slot)); | ||
| 203 | 209 | ||
| 204 | return shpchp_sysfs_enable_slot(slot); | 210 | return shpchp_sysfs_enable_slot(slot); |
| 205 | } | 211 | } |
| @@ -208,7 +214,8 @@ static int disable_slot (struct hotplug_slot *hotplug_slot) | |||
| 208 | { | 214 | { |
| 209 | struct slot *slot = get_slot(hotplug_slot); | 215 | struct slot *slot = get_slot(hotplug_slot); |
| 210 | 216 | ||
| 211 | dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); | 217 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 218 | __func__, slot_name(slot)); | ||
| 212 | 219 | ||
| 213 | return shpchp_sysfs_disable_slot(slot); | 220 | return shpchp_sysfs_disable_slot(slot); |
| 214 | } | 221 | } |
| @@ -218,7 +225,8 @@ static int get_power_status (struct hotplug_slot *hotplug_slot, u8 *value) | |||
| 218 | struct slot *slot = get_slot(hotplug_slot); | 225 | struct slot *slot = get_slot(hotplug_slot); |
| 219 | int retval; | 226 | int retval; |
| 220 | 227 | ||
| 221 | dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); | 228 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 229 | __func__, slot_name(slot)); | ||
| 222 | 230 | ||
| 223 | retval = slot->hpc_ops->get_power_status(slot, value); | 231 | retval = slot->hpc_ops->get_power_status(slot, value); |
| 224 | if (retval < 0) | 232 | if (retval < 0) |
| @@ -232,7 +240,8 @@ static int get_attention_status (struct hotplug_slot *hotplug_slot, u8 *value) | |||
| 232 | struct slot *slot = get_slot(hotplug_slot); | 240 | struct slot *slot = get_slot(hotplug_slot); |
| 233 | int retval; | 241 | int retval; |
| 234 | 242 | ||
| 235 | dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); | 243 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 244 | __func__, slot_name(slot)); | ||
| 236 | 245 | ||
| 237 | retval = slot->hpc_ops->get_attention_status(slot, value); | 246 | retval = slot->hpc_ops->get_attention_status(slot, value); |
| 238 | if (retval < 0) | 247 | if (retval < 0) |
| @@ -246,7 +255,8 @@ static int get_latch_status (struct hotplug_slot *hotplug_slot, u8 *value) | |||
| 246 | struct slot *slot = get_slot(hotplug_slot); | 255 | struct slot *slot = get_slot(hotplug_slot); |
| 247 | int retval; | 256 | int retval; |
| 248 | 257 | ||
| 249 | dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); | 258 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 259 | __func__, slot_name(slot)); | ||
| 250 | 260 | ||
| 251 | retval = slot->hpc_ops->get_latch_status(slot, value); | 261 | retval = slot->hpc_ops->get_latch_status(slot, value); |
| 252 | if (retval < 0) | 262 | if (retval < 0) |
| @@ -260,7 +270,8 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value) | |||
| 260 | struct slot *slot = get_slot(hotplug_slot); | 270 | struct slot *slot = get_slot(hotplug_slot); |
| 261 | int retval; | 271 | int retval; |
| 262 | 272 | ||
| 263 | dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); | 273 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 274 | __func__, slot_name(slot)); | ||
| 264 | 275 | ||
| 265 | retval = slot->hpc_ops->get_adapter_status(slot, value); | 276 | retval = slot->hpc_ops->get_adapter_status(slot, value); |
| 266 | if (retval < 0) | 277 | if (retval < 0) |
| @@ -275,7 +286,8 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, | |||
| 275 | struct slot *slot = get_slot(hotplug_slot); | 286 | struct slot *slot = get_slot(hotplug_slot); |
| 276 | int retval; | 287 | int retval; |
| 277 | 288 | ||
| 278 | dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); | 289 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 290 | __func__, slot_name(slot)); | ||
| 279 | 291 | ||
| 280 | retval = slot->hpc_ops->get_max_bus_speed(slot, value); | 292 | retval = slot->hpc_ops->get_max_bus_speed(slot, value); |
| 281 | if (retval < 0) | 293 | if (retval < 0) |
| @@ -289,7 +301,8 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp | |||
| 289 | struct slot *slot = get_slot(hotplug_slot); | 301 | struct slot *slot = get_slot(hotplug_slot); |
| 290 | int retval; | 302 | int retval; |
| 291 | 303 | ||
| 292 | dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); | 304 | ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n", |
| 305 | __func__, slot_name(slot)); | ||
| 293 | 306 | ||
| 294 | retval = slot->hpc_ops->get_cur_bus_speed(slot, value); | 307 | retval = slot->hpc_ops->get_cur_bus_speed(slot, value); |
| 295 | if (retval < 0) | 308 | if (retval < 0) |
| @@ -320,15 +333,14 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) | |||
| 320 | 333 | ||
| 321 | ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); | 334 | ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); |
| 322 | if (!ctrl) { | 335 | if (!ctrl) { |
| 323 | err("%s : out of memory\n", __func__); | 336 | dev_err(&pdev->dev, "%s: Out of memory\n", __func__); |
| 324 | goto err_out_none; | 337 | goto err_out_none; |
| 325 | } | 338 | } |
| 326 | INIT_LIST_HEAD(&ctrl->slot_list); | 339 | INIT_LIST_HEAD(&ctrl->slot_list); |
| 327 | 340 | ||
| 328 | rc = shpc_init(ctrl, pdev); | 341 | rc = shpc_init(ctrl, pdev); |
| 329 | if (rc) { | 342 | if (rc) { |
| 330 | dbg("%s: controller initialization failed\n", | 343 | ctrl_dbg(ctrl, "Controller initialization failed\n"); |
| 331 | SHPC_MODULE_NAME); | ||
| 332 | goto err_out_free_ctrl; | 344 | goto err_out_free_ctrl; |
| 333 | } | 345 | } |
| 334 | 346 | ||
| @@ -337,7 +349,7 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) | |||
| 337 | /* Setup the slot information structures */ | 349 | /* Setup the slot information structures */ |
| 338 | rc = init_slots(ctrl); | 350 | rc = init_slots(ctrl); |
| 339 | if (rc) { | 351 | if (rc) { |
| 340 | err("%s: slot initialization failed\n", SHPC_MODULE_NAME); | 352 | ctrl_err(ctrl, "Slot initialization failed\n"); |
| 341 | goto err_out_release_ctlr; | 353 | goto err_out_release_ctlr; |
| 342 | } | 354 | } |
| 343 | 355 | ||
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 919b1ee44313..b8ab2796e66a 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c | |||
| @@ -62,7 +62,7 @@ u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl) | |||
| 62 | u32 event_type; | 62 | u32 event_type; |
| 63 | 63 | ||
| 64 | /* Attention Button Change */ | 64 | /* Attention Button Change */ |
| 65 | dbg("shpchp: Attention button interrupt received.\n"); | 65 | ctrl_dbg(ctrl, "Attention button interrupt received\n"); |
| 66 | 66 | ||
| 67 | p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); | 67 | p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); |
| 68 | p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); | 68 | p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); |
| @@ -70,7 +70,7 @@ u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl) | |||
| 70 | /* | 70 | /* |
| 71 | * Button pressed - See if need to TAKE ACTION!!! | 71 | * Button pressed - See if need to TAKE ACTION!!! |
| 72 | */ | 72 | */ |
| 73 | info("Button pressed on Slot(%s)\n", slot_name(p_slot)); | 73 | ctrl_info(ctrl, "Button pressed on Slot(%s)\n", slot_name(p_slot)); |
| 74 | event_type = INT_BUTTON_PRESS; | 74 | event_type = INT_BUTTON_PRESS; |
| 75 | 75 | ||
| 76 | queue_interrupt_event(p_slot, event_type); | 76 | queue_interrupt_event(p_slot, event_type); |
| @@ -86,29 +86,29 @@ u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl) | |||
| 86 | u32 event_type; | 86 | u32 event_type; |
| 87 | 87 | ||
| 88 | /* Switch Change */ | 88 | /* Switch Change */ |
| 89 | dbg("shpchp: Switch interrupt received.\n"); | 89 | ctrl_dbg(ctrl, "Switch interrupt received\n"); |
| 90 | 90 | ||
| 91 | p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); | 91 | p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); |
| 92 | p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); | 92 | p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); |
| 93 | p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); | 93 | p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); |
| 94 | dbg("%s: Card present %x Power status %x\n", __func__, | 94 | ctrl_dbg(ctrl, "Card present %x Power status %x\n", |
| 95 | p_slot->presence_save, p_slot->pwr_save); | 95 | p_slot->presence_save, p_slot->pwr_save); |
| 96 | 96 | ||
| 97 | if (getstatus) { | 97 | if (getstatus) { |
| 98 | /* | 98 | /* |
| 99 | * Switch opened | 99 | * Switch opened |
| 100 | */ | 100 | */ |
| 101 | info("Latch open on Slot(%s)\n", slot_name(p_slot)); | 101 | ctrl_info(ctrl, "Latch open on Slot(%s)\n", slot_name(p_slot)); |
| 102 | event_type = INT_SWITCH_OPEN; | 102 | event_type = INT_SWITCH_OPEN; |
| 103 | if (p_slot->pwr_save && p_slot->presence_save) { | 103 | if (p_slot->pwr_save && p_slot->presence_save) { |
| 104 | event_type = INT_POWER_FAULT; | 104 | event_type = INT_POWER_FAULT; |
| 105 | err("Surprise Removal of card\n"); | 105 | ctrl_err(ctrl, "Surprise Removal of card\n"); |
| 106 | } | 106 | } |
| 107 | } else { | 107 | } else { |
| 108 | /* | 108 | /* |
| 109 | * Switch closed | 109 | * Switch closed |
| 110 | */ | 110 | */ |
| 111 | info("Latch close on Slot(%s)\n", slot_name(p_slot)); | 111 | ctrl_info(ctrl, "Latch close on Slot(%s)\n", slot_name(p_slot)); |
| 112 | event_type = INT_SWITCH_CLOSE; | 112 | event_type = INT_SWITCH_CLOSE; |
| 113 | } | 113 | } |
| 114 | 114 | ||
| @@ -123,7 +123,7 @@ u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl) | |||
| 123 | u32 event_type; | 123 | u32 event_type; |
| 124 | 124 | ||
| 125 | /* Presence Change */ | 125 | /* Presence Change */ |
| 126 | dbg("shpchp: Presence/Notify input change.\n"); | 126 | ctrl_dbg(ctrl, "Presence/Notify input change\n"); |
| 127 | 127 | ||
| 128 | p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); | 128 | p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); |
| 129 | 129 | ||
| @@ -135,13 +135,15 @@ u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl) | |||
| 135 | /* | 135 | /* |
| 136 | * Card Present | 136 | * Card Present |
| 137 | */ | 137 | */ |
| 138 | info("Card present on Slot(%s)\n", slot_name(p_slot)); | 138 | ctrl_info(ctrl, "Card present on Slot(%s)\n", |
| 139 | slot_name(p_slot)); | ||
| 139 | event_type = INT_PRESENCE_ON; | 140 | event_type = INT_PRESENCE_ON; |
| 140 | } else { | 141 | } else { |
| 141 | /* | 142 | /* |
| 142 | * Not Present | 143 | * Not Present |
| 143 | */ | 144 | */ |
| 144 | info("Card not present on Slot(%s)\n", slot_name(p_slot)); | 145 | ctrl_info(ctrl, "Card not present on Slot(%s)\n", |
| 146 | slot_name(p_slot)); | ||
| 145 | event_type = INT_PRESENCE_OFF; | 147 | event_type = INT_PRESENCE_OFF; |
| 146 | } | 148 | } |
| 147 | 149 | ||
| @@ -156,7 +158,7 @@ u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl) | |||
| 156 | u32 event_type; | 158 | u32 event_type; |
| 157 | 159 | ||
| 158 | /* Power fault */ | 160 | /* Power fault */ |
| 159 | dbg("shpchp: Power fault interrupt received.\n"); | 161 | ctrl_dbg(ctrl, "Power fault interrupt received\n"); |
| 160 | 162 | ||
| 161 | p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); | 163 | p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); |
| 162 | 164 | ||
| @@ -164,18 +166,19 @@ u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl) | |||
| 164 | /* | 166 | /* |
| 165 | * Power fault Cleared | 167 | * Power fault Cleared |
| 166 | */ | 168 | */ |
| 167 | info("Power fault cleared on Slot(%s)\n", slot_name(p_slot)); | 169 | ctrl_info(ctrl, "Power fault cleared on Slot(%s)\n", |
| 170 | slot_name(p_slot)); | ||
| 168 | p_slot->status = 0x00; | 171 | p_slot->status = 0x00; |
| 169 | event_type = INT_POWER_FAULT_CLEAR; | 172 | event_type = INT_POWER_FAULT_CLEAR; |
| 170 | } else { | 173 | } else { |
| 171 | /* | 174 | /* |
| 172 | * Power fault | 175 | * Power fault |
| 173 | */ | 176 | */ |
| 174 | info("Power fault on Slot(%s)\n", slot_name(p_slot)); | 177 | ctrl_info(ctrl, "Power fault on Slot(%s)\n", slot_name(p_slot)); |
| 175 | event_type = INT_POWER_FAULT; | 178 | event_type = INT_POWER_FAULT; |
| 176 | /* set power fault status for this board */ | 179 | /* set power fault status for this board */ |
| 177 | p_slot->status = 0xFF; | 180 | p_slot->status = 0xFF; |
| 178 | info("power fault bit %x set\n", hp_slot); | 181 | ctrl_info(ctrl, "Power fault bit %x set\n", hp_slot); |
| 179 | } | 182 | } |
| 180 | 183 | ||
| 181 | queue_interrupt_event(p_slot, event_type); | 184 | queue_interrupt_event(p_slot, event_type); |
| @@ -191,10 +194,10 @@ static int change_bus_speed(struct controller *ctrl, struct slot *p_slot, | |||
| 191 | { | 194 | { |
| 192 | int rc = 0; | 195 | int rc = 0; |
| 193 | 196 | ||
| 194 | dbg("%s: change to speed %d\n", __func__, speed); | 197 | ctrl_dbg(ctrl, "Change speed to %d\n", speed); |
| 195 | if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) { | 198 | if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) { |
| 196 | err("%s: Issue of set bus speed mode command failed\n", | 199 | ctrl_err(ctrl, "%s: Issue of set bus speed mode command " |
| 197 | __func__); | 200 | "failed\n", __func__); |
| 198 | return WRONG_BUS_FREQUENCY; | 201 | return WRONG_BUS_FREQUENCY; |
| 199 | } | 202 | } |
| 200 | return rc; | 203 | return rc; |
| @@ -212,8 +215,8 @@ static int fix_bus_speed(struct controller *ctrl, struct slot *pslot, | |||
| 212 | */ | 215 | */ |
| 213 | if (flag) { | 216 | if (flag) { |
| 214 | if (asp < bsp) { | 217 | if (asp < bsp) { |
| 215 | err("%s: speed of bus %x and adapter %x mismatch\n", | 218 | ctrl_err(ctrl, "Speed of bus %x and adapter %x " |
| 216 | __func__, bsp, asp); | 219 | "mismatch\n", bsp, asp); |
| 217 | rc = WRONG_BUS_FREQUENCY; | 220 | rc = WRONG_BUS_FREQUENCY; |
| 218 | } | 221 | } |
| 219 | return rc; | 222 | return rc; |
| @@ -243,17 +246,18 @@ static int board_added(struct slot *p_slot) | |||
| 243 | int rc = 0; | 246 | int rc = 0; |
| 244 | enum pci_bus_speed asp, bsp, msp; | 247 | enum pci_bus_speed asp, bsp, msp; |
| 245 | struct controller *ctrl = p_slot->ctrl; | 248 | struct controller *ctrl = p_slot->ctrl; |
| 249 | struct pci_bus *parent = ctrl->pci_dev->subordinate; | ||
| 246 | 250 | ||
| 247 | hp_slot = p_slot->device - ctrl->slot_device_offset; | 251 | hp_slot = p_slot->device - ctrl->slot_device_offset; |
| 248 | 252 | ||
| 249 | dbg("%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n", | 253 | ctrl_dbg(ctrl, |
| 250 | __func__, p_slot->device, | 254 | "%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n", |
| 251 | ctrl->slot_device_offset, hp_slot); | 255 | __func__, p_slot->device, ctrl->slot_device_offset, hp_slot); |
| 252 | 256 | ||
| 253 | /* Power on slot without connecting to bus */ | 257 | /* Power on slot without connecting to bus */ |
| 254 | rc = p_slot->hpc_ops->power_on_slot(p_slot); | 258 | rc = p_slot->hpc_ops->power_on_slot(p_slot); |
| 255 | if (rc) { | 259 | if (rc) { |
| 256 | err("%s: Failed to power on slot\n", __func__); | 260 | ctrl_err(ctrl, "Failed to power on slot\n"); |
| 257 | return -1; | 261 | return -1; |
| 258 | } | 262 | } |
| 259 | 263 | ||
| @@ -262,33 +266,34 @@ static int board_added(struct slot *p_slot) | |||
| 262 | return WRONG_BUS_FREQUENCY; | 266 | return WRONG_BUS_FREQUENCY; |
| 263 | 267 | ||
| 264 | if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) { | 268 | if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) { |
| 265 | err("%s: Issue of set bus speed mode command failed\n", __func__); | 269 | ctrl_err(ctrl, "%s: Issue of set bus speed mode command" |
| 270 | " failed\n", __func__); | ||
| 266 | return WRONG_BUS_FREQUENCY; | 271 | return WRONG_BUS_FREQUENCY; |
| 267 | } | 272 | } |
| 268 | 273 | ||
| 269 | /* turn on board, blink green LED, turn off Amber LED */ | 274 | /* turn on board, blink green LED, turn off Amber LED */ |
| 270 | if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) { | 275 | if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) { |
| 271 | err("%s: Issue of Slot Enable command failed\n", __func__); | 276 | ctrl_err(ctrl, "Issue of Slot Enable command failed\n"); |
| 272 | return rc; | 277 | return rc; |
| 273 | } | 278 | } |
| 274 | } | 279 | } |
| 275 | 280 | ||
| 276 | rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp); | 281 | rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp); |
| 277 | if (rc) { | 282 | if (rc) { |
| 278 | err("%s: Can't get adapter speed or bus mode mismatch\n", | 283 | ctrl_err(ctrl, "Can't get adapter speed or " |
| 279 | __func__); | 284 | "bus mode mismatch\n"); |
| 280 | return WRONG_BUS_FREQUENCY; | 285 | return WRONG_BUS_FREQUENCY; |
| 281 | } | 286 | } |
| 282 | 287 | ||
| 283 | rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp); | 288 | rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp); |
| 284 | if (rc) { | 289 | if (rc) { |
| 285 | err("%s: Can't get bus operation speed\n", __func__); | 290 | ctrl_err(ctrl, "Can't get bus operation speed\n"); |
| 286 | return WRONG_BUS_FREQUENCY; | 291 | return WRONG_BUS_FREQUENCY; |
| 287 | } | 292 | } |
| 288 | 293 | ||
| 289 | rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp); | 294 | rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp); |
| 290 | if (rc) { | 295 | if (rc) { |
| 291 | err("%s: Can't get max bus operation speed\n", __func__); | 296 | ctrl_err(ctrl, "Can't get max bus operation speed\n"); |
| 292 | msp = bsp; | 297 | msp = bsp; |
| 293 | } | 298 | } |
| 294 | 299 | ||
| @@ -296,9 +301,9 @@ static int board_added(struct slot *p_slot) | |||
| 296 | if (!list_empty(&ctrl->pci_dev->subordinate->devices)) | 301 | if (!list_empty(&ctrl->pci_dev->subordinate->devices)) |
| 297 | slots_not_empty = 1; | 302 | slots_not_empty = 1; |
| 298 | 303 | ||
| 299 | dbg("%s: slots_not_empty %d, adapter_speed %d, bus_speed %d, " | 304 | ctrl_dbg(ctrl, "%s: slots_not_empty %d, adapter_speed %d, bus_speed %d," |
| 300 | "max_bus_speed %d\n", __func__, slots_not_empty, asp, | 305 | " max_bus_speed %d\n", __func__, slots_not_empty, asp, |
| 301 | bsp, msp); | 306 | bsp, msp); |
| 302 | 307 | ||
| 303 | rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, asp, bsp, msp); | 308 | rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, asp, bsp, msp); |
| 304 | if (rc) | 309 | if (rc) |
| @@ -306,26 +311,26 @@ static int board_added(struct slot *p_slot) | |||
| 306 | 311 | ||
| 307 | /* turn on board, blink green LED, turn off Amber LED */ | 312 | /* turn on board, blink green LED, turn off Amber LED */ |
| 308 | if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) { | 313 | if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) { |
| 309 | err("%s: Issue of Slot Enable command failed\n", __func__); | 314 | ctrl_err(ctrl, "Issue of Slot Enable command failed\n"); |
| 310 | return rc; | 315 | return rc; |
| 311 | } | 316 | } |
| 312 | 317 | ||
| 313 | /* Wait for ~1 second */ | 318 | /* Wait for ~1 second */ |
| 314 | msleep(1000); | 319 | msleep(1000); |
| 315 | 320 | ||
| 316 | dbg("%s: slot status = %x\n", __func__, p_slot->status); | 321 | ctrl_dbg(ctrl, "%s: slot status = %x\n", __func__, p_slot->status); |
| 317 | /* Check for a power fault */ | 322 | /* Check for a power fault */ |
| 318 | if (p_slot->status == 0xFF) { | 323 | if (p_slot->status == 0xFF) { |
| 319 | /* power fault occurred, but it was benign */ | 324 | /* power fault occurred, but it was benign */ |
| 320 | dbg("%s: power fault\n", __func__); | 325 | ctrl_dbg(ctrl, "%s: Power fault\n", __func__); |
| 321 | rc = POWER_FAILURE; | 326 | rc = POWER_FAILURE; |
| 322 | p_slot->status = 0; | 327 | p_slot->status = 0; |
| 323 | goto err_exit; | 328 | goto err_exit; |
| 324 | } | 329 | } |
| 325 | 330 | ||
| 326 | if (shpchp_configure_device(p_slot)) { | 331 | if (shpchp_configure_device(p_slot)) { |
| 327 | err("Cannot add device at 0x%x:0x%x\n", p_slot->bus, | 332 | ctrl_err(ctrl, "Cannot add device at %04x:%02x:%02x\n", |
| 328 | p_slot->device); | 333 | pci_domain_nr(parent), p_slot->bus, p_slot->device); |
| 329 | goto err_exit; | 334 | goto err_exit; |
| 330 | } | 335 | } |
| 331 | 336 | ||
| @@ -341,7 +346,8 @@ err_exit: | |||
| 341 | /* turn off slot, turn on Amber LED, turn off Green LED */ | 346 | /* turn off slot, turn on Amber LED, turn off Green LED */ |
| 342 | rc = p_slot->hpc_ops->slot_disable(p_slot); | 347 | rc = p_slot->hpc_ops->slot_disable(p_slot); |
| 343 | if (rc) { | 348 | if (rc) { |
| 344 | err("%s: Issue of Slot Disable command failed\n", __func__); | 349 | ctrl_err(ctrl, "%s: Issue of Slot Disable command failed\n", |
| 350 | __func__); | ||
| 345 | return rc; | 351 | return rc; |
| 346 | } | 352 | } |
| 347 | 353 | ||
| @@ -365,7 +371,7 @@ static int remove_board(struct slot *p_slot) | |||
| 365 | hp_slot = p_slot->device - ctrl->slot_device_offset; | 371 | hp_slot = p_slot->device - ctrl->slot_device_offset; |
| 366 | p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); | 372 | p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); |
| 367 | 373 | ||
| 368 | dbg("In %s, hp_slot = %d\n", __func__, hp_slot); | 374 | ctrl_dbg(ctrl, "%s: hp_slot = %d\n", __func__, hp_slot); |
| 369 | 375 | ||
| 370 | /* Change status to shutdown */ | 376 | /* Change status to shutdown */ |
| 371 | if (p_slot->is_a_board) | 377 | if (p_slot->is_a_board) |
| @@ -374,13 +380,14 @@ static int remove_board(struct slot *p_slot) | |||
| 374 | /* turn off slot, turn on Amber LED, turn off Green LED */ | 380 | /* turn off slot, turn on Amber LED, turn off Green LED */ |
| 375 | rc = p_slot->hpc_ops->slot_disable(p_slot); | 381 | rc = p_slot->hpc_ops->slot_disable(p_slot); |
| 376 | if (rc) { | 382 | if (rc) { |
| 377 | err("%s: Issue of Slot Disable command failed\n", __func__); | 383 | ctrl_err(ctrl, "%s: Issue of Slot Disable command failed\n", |
| 384 | __func__); | ||
| 378 | return rc; | 385 | return rc; |
| 379 | } | 386 | } |
| 380 | 387 | ||
| 381 | rc = p_slot->hpc_ops->set_attention_status(p_slot, 0); | 388 | rc = p_slot->hpc_ops->set_attention_status(p_slot, 0); |
| 382 | if (rc) { | 389 | if (rc) { |
| 383 | err("%s: Issue of Set Attention command failed\n", __func__); | 390 | ctrl_err(ctrl, "Issue of Set Attention command failed\n"); |
| 384 | return rc; | 391 | return rc; |
| 385 | } | 392 | } |
| 386 | 393 | ||
| @@ -439,7 +446,8 @@ void shpchp_queue_pushbutton_work(struct work_struct *work) | |||
| 439 | 446 | ||
| 440 | info = kmalloc(sizeof(*info), GFP_KERNEL); | 447 | info = kmalloc(sizeof(*info), GFP_KERNEL); |
| 441 | if (!info) { | 448 | if (!info) { |
| 442 | err("%s: Cannot allocate memory\n", __func__); | 449 | ctrl_err(p_slot->ctrl, "%s: Cannot allocate memory\n", |
| 450 | __func__); | ||
| 443 | return; | 451 | return; |
| 444 | } | 452 | } |
| 445 | info->p_slot = p_slot; | 453 | info->p_slot = p_slot; |
| @@ -486,18 +494,19 @@ static int update_slot_info (struct slot *slot) | |||
| 486 | static void handle_button_press_event(struct slot *p_slot) | 494 | static void handle_button_press_event(struct slot *p_slot) |
| 487 | { | 495 | { |
| 488 | u8 getstatus; | 496 | u8 getstatus; |
| 497 | struct controller *ctrl = p_slot->ctrl; | ||
| 489 | 498 | ||
| 490 | switch (p_slot->state) { | 499 | switch (p_slot->state) { |
| 491 | case STATIC_STATE: | 500 | case STATIC_STATE: |
| 492 | p_slot->hpc_ops->get_power_status(p_slot, &getstatus); | 501 | p_slot->hpc_ops->get_power_status(p_slot, &getstatus); |
| 493 | if (getstatus) { | 502 | if (getstatus) { |
| 494 | p_slot->state = BLINKINGOFF_STATE; | 503 | p_slot->state = BLINKINGOFF_STATE; |
| 495 | info("PCI slot #%s - powering off due to button " | 504 | ctrl_info(ctrl, "PCI slot #%s - powering off due to " |
| 496 | "press.\n", slot_name(p_slot)); | 505 | "button press.\n", slot_name(p_slot)); |
| 497 | } else { | 506 | } else { |
| 498 | p_slot->state = BLINKINGON_STATE; | 507 | p_slot->state = BLINKINGON_STATE; |
| 499 | info("PCI slot #%s - powering on due to button " | 508 | ctrl_info(ctrl, "PCI slot #%s - powering on due to " |
| 500 | "press.\n", slot_name(p_slot)); | 509 | "button press.\n", slot_name(p_slot)); |
| 501 | } | 510 | } |
| 502 | /* blink green LED and turn off amber */ | 511 | /* blink green LED and turn off amber */ |
| 503 | p_slot->hpc_ops->green_led_blink(p_slot); | 512 | p_slot->hpc_ops->green_led_blink(p_slot); |
| @@ -512,16 +521,16 @@ static void handle_button_press_event(struct slot *p_slot) | |||
| 512 | * press the attention again before the 5 sec. limit | 521 | * press the attention again before the 5 sec. limit |
| 513 | * expires to cancel hot-add or hot-remove | 522 | * expires to cancel hot-add or hot-remove |
| 514 | */ | 523 | */ |
| 515 | info("Button cancel on Slot(%s)\n", slot_name(p_slot)); | 524 | ctrl_info(ctrl, "Button cancel on Slot(%s)\n", |
| 516 | dbg("%s: button cancel\n", __func__); | 525 | slot_name(p_slot)); |
| 517 | cancel_delayed_work(&p_slot->work); | 526 | cancel_delayed_work(&p_slot->work); |
| 518 | if (p_slot->state == BLINKINGOFF_STATE) | 527 | if (p_slot->state == BLINKINGOFF_STATE) |
| 519 | p_slot->hpc_ops->green_led_on(p_slot); | 528 | p_slot->hpc_ops->green_led_on(p_slot); |
| 520 | else | 529 | else |
| 521 | p_slot->hpc_ops->green_led_off(p_slot); | 530 | p_slot->hpc_ops->green_led_off(p_slot); |
| 522 | p_slot->hpc_ops->set_attention_status(p_slot, 0); | 531 | p_slot->hpc_ops->set_attention_status(p_slot, 0); |
| 523 | info("PCI slot #%s - action canceled due to button press\n", | 532 | ctrl_info(ctrl, "PCI slot #%s - action canceled due to " |
| 524 | slot_name(p_slot)); | 533 | "button press\n", slot_name(p_slot)); |
| 525 | p_slot->state = STATIC_STATE; | 534 | p_slot->state = STATIC_STATE; |
| 526 | break; | 535 | break; |
| 527 | case POWEROFF_STATE: | 536 | case POWEROFF_STATE: |
| @@ -531,11 +540,12 @@ static void handle_button_press_event(struct slot *p_slot) | |||
| 531 | * this means that the previous attention button action | 540 | * this means that the previous attention button action |
| 532 | * to hot-add or hot-remove is undergoing | 541 | * to hot-add or hot-remove is undergoing |
| 533 | */ | 542 | */ |
| 534 | info("Button ignore on Slot(%s)\n", slot_name(p_slot)); | 543 | ctrl_info(ctrl, "Button ignore on Slot(%s)\n", |
| 544 | slot_name(p_slot)); | ||
| 535 | update_slot_info(p_slot); | 545 | update_slot_info(p_slot); |
| 536 | break; | 546 | break; |
| 537 | default: | 547 | default: |
| 538 | warn("Not a valid state\n"); | 548 | ctrl_warn(ctrl, "Not a valid state\n"); |
| 539 | break; | 549 | break; |
| 540 | } | 550 | } |
| 541 | } | 551 | } |
| @@ -551,7 +561,7 @@ static void interrupt_event_handler(struct work_struct *work) | |||
| 551 | handle_button_press_event(p_slot); | 561 | handle_button_press_event(p_slot); |
| 552 | break; | 562 | break; |
| 553 | case INT_POWER_FAULT: | 563 | case INT_POWER_FAULT: |
| 554 | dbg("%s: power fault\n", __func__); | 564 | ctrl_dbg(p_slot->ctrl, "%s: Power fault\n", __func__); |
| 555 | p_slot->hpc_ops->set_attention_status(p_slot, 1); | 565 | p_slot->hpc_ops->set_attention_status(p_slot, 1); |
| 556 | p_slot->hpc_ops->green_led_off(p_slot); | 566 | p_slot->hpc_ops->green_led_off(p_slot); |
| 557 | break; | 567 | break; |
| @@ -569,22 +579,24 @@ static int shpchp_enable_slot (struct slot *p_slot) | |||
| 569 | { | 579 | { |
| 570 | u8 getstatus = 0; | 580 | u8 getstatus = 0; |
| 571 | int rc, retval = -ENODEV; | 581 | int rc, retval = -ENODEV; |
| 582 | struct controller *ctrl = p_slot->ctrl; | ||
| 572 | 583 | ||
| 573 | /* Check to see if (latch closed, card present, power off) */ | 584 | /* Check to see if (latch closed, card present, power off) */ |
| 574 | mutex_lock(&p_slot->ctrl->crit_sect); | 585 | mutex_lock(&p_slot->ctrl->crit_sect); |
| 575 | rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); | 586 | rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); |
| 576 | if (rc || !getstatus) { | 587 | if (rc || !getstatus) { |
| 577 | info("No adapter on slot(%s)\n", slot_name(p_slot)); | 588 | ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot)); |
| 578 | goto out; | 589 | goto out; |
| 579 | } | 590 | } |
| 580 | rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); | 591 | rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); |
| 581 | if (rc || getstatus) { | 592 | if (rc || getstatus) { |
| 582 | info("Latch open on slot(%s)\n", slot_name(p_slot)); | 593 | ctrl_info(ctrl, "Latch open on slot(%s)\n", slot_name(p_slot)); |
| 583 | goto out; | 594 | goto out; |
| 584 | } | 595 | } |
| 585 | rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); | 596 | rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); |
| 586 | if (rc || getstatus) { | 597 | if (rc || getstatus) { |
| 587 | info("Already enabled on slot(%s)\n", slot_name(p_slot)); | 598 | ctrl_info(ctrl, "Already enabled on slot(%s)\n", |
| 599 | slot_name(p_slot)); | ||
| 588 | goto out; | 600 | goto out; |
| 589 | } | 601 | } |
| 590 | 602 | ||
| @@ -593,7 +605,7 @@ static int shpchp_enable_slot (struct slot *p_slot) | |||
| 593 | /* We have to save the presence info for these slots */ | 605 | /* We have to save the presence info for these slots */ |
| 594 | p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); | 606 | p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); |
| 595 | p_slot->hpc_ops->get_power_status(p_slot, &(p_slot->pwr_save)); | 607 | p_slot->hpc_ops->get_power_status(p_slot, &(p_slot->pwr_save)); |
| 596 | dbg("%s: p_slot->pwr_save %x\n", __func__, p_slot->pwr_save); | 608 | ctrl_dbg(ctrl, "%s: p_slot->pwr_save %x\n", __func__, p_slot->pwr_save); |
| 597 | p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); | 609 | p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); |
| 598 | 610 | ||
| 599 | if(((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) || | 611 | if(((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) || |
| @@ -624,6 +636,7 @@ static int shpchp_disable_slot (struct slot *p_slot) | |||
| 624 | { | 636 | { |
| 625 | u8 getstatus = 0; | 637 | u8 getstatus = 0; |
| 626 | int rc, retval = -ENODEV; | 638 | int rc, retval = -ENODEV; |
| 639 | struct controller *ctrl = p_slot->ctrl; | ||
| 627 | 640 | ||
| 628 | if (!p_slot->ctrl) | 641 | if (!p_slot->ctrl) |
| 629 | return -ENODEV; | 642 | return -ENODEV; |
| @@ -633,17 +646,18 @@ static int shpchp_disable_slot (struct slot *p_slot) | |||
| 633 | 646 | ||
| 634 | rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); | 647 | rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); |
| 635 | if (rc || !getstatus) { | 648 | if (rc || !getstatus) { |
| 636 | info("No adapter on slot(%s)\n", slot_name(p_slot)); | 649 | ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot)); |
| 637 | goto out; | 650 | goto out; |
| 638 | } | 651 | } |
| 639 | rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); | 652 | rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); |
| 640 | if (rc || getstatus) { | 653 | if (rc || getstatus) { |
| 641 | info("Latch open on slot(%s)\n", slot_name(p_slot)); | 654 | ctrl_info(ctrl, "Latch open on slot(%s)\n", slot_name(p_slot)); |
| 642 | goto out; | 655 | goto out; |
| 643 | } | 656 | } |
| 644 | rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); | 657 | rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); |
| 645 | if (rc || !getstatus) { | 658 | if (rc || !getstatus) { |
| 646 | info("Already disabled slot(%s)\n", slot_name(p_slot)); | 659 | ctrl_info(ctrl, "Already disabled on slot(%s)\n", |
| 660 | slot_name(p_slot)); | ||
| 647 | goto out; | 661 | goto out; |
| 648 | } | 662 | } |
| 649 | 663 | ||
| @@ -657,6 +671,7 @@ static int shpchp_disable_slot (struct slot *p_slot) | |||
| 657 | int shpchp_sysfs_enable_slot(struct slot *p_slot) | 671 | int shpchp_sysfs_enable_slot(struct slot *p_slot) |
| 658 | { | 672 | { |
| 659 | int retval = -ENODEV; | 673 | int retval = -ENODEV; |
| 674 | struct controller *ctrl = p_slot->ctrl; | ||
| 660 | 675 | ||
| 661 | mutex_lock(&p_slot->lock); | 676 | mutex_lock(&p_slot->lock); |
| 662 | switch (p_slot->state) { | 677 | switch (p_slot->state) { |
| @@ -670,15 +685,17 @@ int shpchp_sysfs_enable_slot(struct slot *p_slot) | |||
| 670 | p_slot->state = STATIC_STATE; | 685 | p_slot->state = STATIC_STATE; |
| 671 | break; | 686 | break; |
| 672 | case POWERON_STATE: | 687 | case POWERON_STATE: |
| 673 | info("Slot %s is already in powering on state\n", | 688 | ctrl_info(ctrl, "Slot %s is already in powering on state\n", |
| 674 | slot_name(p_slot)); | 689 | slot_name(p_slot)); |
| 675 | break; | 690 | break; |
| 676 | case BLINKINGOFF_STATE: | 691 | case BLINKINGOFF_STATE: |
| 677 | case POWEROFF_STATE: | 692 | case POWEROFF_STATE: |
| 678 | info("Already enabled on slot %s\n", slot_name(p_slot)); | 693 | ctrl_info(ctrl, "Already enabled on slot %s\n", |
| 694 | slot_name(p_slot)); | ||
| 679 | break; | 695 | break; |
| 680 | default: | 696 | default: |
| 681 | err("Not a valid state on slot %s\n", slot_name(p_slot)); | 697 | ctrl_err(ctrl, "Not a valid state on slot %s\n", |
| 698 | slot_name(p_slot)); | ||
| 682 | break; | 699 | break; |
| 683 | } | 700 | } |
| 684 | mutex_unlock(&p_slot->lock); | 701 | mutex_unlock(&p_slot->lock); |
| @@ -689,6 +706,7 @@ int shpchp_sysfs_enable_slot(struct slot *p_slot) | |||
| 689 | int shpchp_sysfs_disable_slot(struct slot *p_slot) | 706 | int shpchp_sysfs_disable_slot(struct slot *p_slot) |
| 690 | { | 707 | { |
| 691 | int retval = -ENODEV; | 708 | int retval = -ENODEV; |
| 709 | struct controller *ctrl = p_slot->ctrl; | ||
| 692 | 710 | ||
| 693 | mutex_lock(&p_slot->lock); | 711 | mutex_lock(&p_slot->lock); |
| 694 | switch (p_slot->state) { | 712 | switch (p_slot->state) { |
| @@ -702,15 +720,17 @@ int shpchp_sysfs_disable_slot(struct slot *p_slot) | |||
| 702 | p_slot->state = STATIC_STATE; | 720 | p_slot->state = STATIC_STATE; |
| 703 | break; | 721 | break; |
| 704 | case POWEROFF_STATE: | 722 | case POWEROFF_STATE: |
| 705 | info("Slot %s is already in powering off state\n", | 723 | ctrl_info(ctrl, "Slot %s is already in powering off state\n", |
| 706 | slot_name(p_slot)); | 724 | slot_name(p_slot)); |
| 707 | break; | 725 | break; |
| 708 | case BLINKINGON_STATE: | 726 | case BLINKINGON_STATE: |
| 709 | case POWERON_STATE: | 727 | case POWERON_STATE: |
| 710 | info("Already disabled on slot %s\n", slot_name(p_slot)); | 728 | ctrl_info(ctrl, "Already disabled on slot %s\n", |
| 729 | slot_name(p_slot)); | ||
| 711 | break; | 730 | break; |
| 712 | default: | 731 | default: |
| 713 | err("Not a valid state on slot %s\n", slot_name(p_slot)); | 732 | ctrl_err(ctrl, "Not a valid state on slot %s\n", |
| 733 | slot_name(p_slot)); | ||
| 714 | break; | 734 | break; |
| 715 | } | 735 | } |
| 716 | mutex_unlock(&p_slot->lock); | 736 | mutex_unlock(&p_slot->lock); |
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 7a0bff364cd4..86dc39847769 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c | |||
| @@ -300,10 +300,10 @@ static inline int shpc_wait_cmd(struct controller *ctrl) | |||
| 300 | !is_ctrl_busy(ctrl), timeout); | 300 | !is_ctrl_busy(ctrl), timeout); |
| 301 | if (!rc && is_ctrl_busy(ctrl)) { | 301 | if (!rc && is_ctrl_busy(ctrl)) { |
| 302 | retval = -EIO; | 302 | retval = -EIO; |
| 303 | err("Command not completed in 1000 msec\n"); | 303 | ctrl_err(ctrl, "Command not completed in 1000 msec\n"); |
| 304 | } else if (rc < 0) { | 304 | } else if (rc < 0) { |
| 305 | retval = -EINTR; | 305 | retval = -EINTR; |
| 306 | info("Command was interrupted by a signal\n"); | 306 | ctrl_info(ctrl, "Command was interrupted by a signal\n"); |
| 307 | } | 307 | } |
| 308 | 308 | ||
| 309 | return retval; | 309 | return retval; |
| @@ -320,15 +320,14 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) | |||
| 320 | 320 | ||
| 321 | if (!shpc_poll_ctrl_busy(ctrl)) { | 321 | if (!shpc_poll_ctrl_busy(ctrl)) { |
| 322 | /* After 1 sec and and the controller is still busy */ | 322 | /* After 1 sec and and the controller is still busy */ |
| 323 | err("%s : Controller is still busy after 1 sec.\n", | 323 | ctrl_err(ctrl, "Controller is still busy after 1 sec\n"); |
| 324 | __func__); | ||
| 325 | retval = -EBUSY; | 324 | retval = -EBUSY; |
| 326 | goto out; | 325 | goto out; |
| 327 | } | 326 | } |
| 328 | 327 | ||
| 329 | ++t_slot; | 328 | ++t_slot; |
| 330 | temp_word = (t_slot << 8) | (cmd & 0xFF); | 329 | temp_word = (t_slot << 8) | (cmd & 0xFF); |
| 331 | dbg("%s: t_slot %x cmd %x\n", __func__, t_slot, cmd); | 330 | ctrl_dbg(ctrl, "%s: t_slot %x cmd %x\n", __func__, t_slot, cmd); |
| 332 | 331 | ||
| 333 | /* To make sure the Controller Busy bit is 0 before we send out the | 332 | /* To make sure the Controller Busy bit is 0 before we send out the |
| 334 | * command. | 333 | * command. |
| @@ -344,8 +343,9 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) | |||
| 344 | 343 | ||
| 345 | cmd_status = hpc_check_cmd_status(slot->ctrl); | 344 | cmd_status = hpc_check_cmd_status(slot->ctrl); |
| 346 | if (cmd_status) { | 345 | if (cmd_status) { |
| 347 | err("%s: Failed to issued command 0x%x (error code = %d)\n", | 346 | ctrl_err(ctrl, |
| 348 | __func__, cmd, cmd_status); | 347 | "Failed to issued command 0x%x (error code = %d)\n", |
| 348 | cmd, cmd_status); | ||
| 349 | retval = -EIO; | 349 | retval = -EIO; |
| 350 | } | 350 | } |
| 351 | out: | 351 | out: |
| @@ -364,15 +364,15 @@ static int hpc_check_cmd_status(struct controller *ctrl) | |||
| 364 | break; | 364 | break; |
| 365 | case 1: | 365 | case 1: |
| 366 | retval = SWITCH_OPEN; | 366 | retval = SWITCH_OPEN; |
| 367 | err("%s: Switch opened!\n", __func__); | 367 | ctrl_err(ctrl, "Switch opened!\n"); |
| 368 | break; | 368 | break; |
| 369 | case 2: | 369 | case 2: |
| 370 | retval = INVALID_CMD; | 370 | retval = INVALID_CMD; |
| 371 | err("%s: Invalid HPC command!\n", __func__); | 371 | ctrl_err(ctrl, "Invalid HPC command!\n"); |
| 372 | break; | 372 | break; |
| 373 | case 4: | 373 | case 4: |
| 374 | retval = INVALID_SPEED_MODE; | 374 | retval = INVALID_SPEED_MODE; |
| 375 | err("%s: Invalid bus speed/mode!\n", __func__); | 375 | ctrl_err(ctrl, "Invalid bus speed/mode!\n"); |
| 376 | break; | 376 | break; |
| 377 | default: | 377 | default: |
| 378 | retval = cmd_status; | 378 | retval = cmd_status; |
| @@ -483,8 +483,8 @@ static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value) | |||
| 483 | return -ENODEV; | 483 | return -ENODEV; |
| 484 | } | 484 | } |
| 485 | 485 | ||
| 486 | dbg("%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n", | 486 | ctrl_dbg(ctrl, "%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n", |
| 487 | __func__, slot_reg, pcix_cap, m66_cap); | 487 | __func__, slot_reg, pcix_cap, m66_cap); |
| 488 | 488 | ||
| 489 | switch (pcix_cap) { | 489 | switch (pcix_cap) { |
| 490 | case 0x0: | 490 | case 0x0: |
| @@ -509,7 +509,7 @@ static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value) | |||
| 509 | break; | 509 | break; |
| 510 | } | 510 | } |
| 511 | 511 | ||
| 512 | dbg("Adapter speed = %d\n", *value); | 512 | ctrl_dbg(ctrl, "Adapter speed = %d\n", *value); |
| 513 | return retval; | 513 | return retval; |
| 514 | } | 514 | } |
| 515 | 515 | ||
| @@ -526,7 +526,7 @@ static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode) | |||
| 526 | retval = -1; | 526 | retval = -1; |
| 527 | } | 527 | } |
| 528 | 528 | ||
| 529 | dbg("Mode 1 ECC cap = %d\n", *mode); | 529 | ctrl_dbg(ctrl, "Mode 1 ECC cap = %d\n", *mode); |
| 530 | return retval; | 530 | return retval; |
| 531 | } | 531 | } |
| 532 | 532 | ||
| @@ -629,7 +629,7 @@ static int hpc_power_on_slot(struct slot * slot) | |||
| 629 | 629 | ||
| 630 | retval = shpc_write_cmd(slot, slot->hp_slot, SET_SLOT_PWR); | 630 | retval = shpc_write_cmd(slot, slot->hp_slot, SET_SLOT_PWR); |
| 631 | if (retval) | 631 | if (retval) |
| 632 | err("%s: Write command failed!\n", __func__); | 632 | ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__); |
| 633 | 633 | ||
| 634 | return retval; | 634 | return retval; |
| 635 | } | 635 | } |
| @@ -642,7 +642,7 @@ static int hpc_slot_enable(struct slot * slot) | |||
| 642 | retval = shpc_write_cmd(slot, slot->hp_slot, | 642 | retval = shpc_write_cmd(slot, slot->hp_slot, |
| 643 | SET_SLOT_ENABLE | SET_PWR_BLINK | SET_ATTN_OFF); | 643 | SET_SLOT_ENABLE | SET_PWR_BLINK | SET_ATTN_OFF); |
| 644 | if (retval) | 644 | if (retval) |
| 645 | err("%s: Write command failed!\n", __func__); | 645 | ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__); |
| 646 | 646 | ||
| 647 | return retval; | 647 | return retval; |
| 648 | } | 648 | } |
| @@ -655,7 +655,7 @@ static int hpc_slot_disable(struct slot * slot) | |||
| 655 | retval = shpc_write_cmd(slot, slot->hp_slot, | 655 | retval = shpc_write_cmd(slot, slot->hp_slot, |
| 656 | SET_SLOT_DISABLE | SET_PWR_OFF | SET_ATTN_ON); | 656 | SET_SLOT_DISABLE | SET_PWR_OFF | SET_ATTN_ON); |
| 657 | if (retval) | 657 | if (retval) |
| 658 | err("%s: Write command failed!\n", __func__); | 658 | ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__); |
| 659 | 659 | ||
| 660 | return retval; | 660 | return retval; |
| 661 | } | 661 | } |
| @@ -719,7 +719,7 @@ static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) | |||
| 719 | 719 | ||
| 720 | retval = shpc_write_cmd(slot, 0, cmd); | 720 | retval = shpc_write_cmd(slot, 0, cmd); |
| 721 | if (retval) | 721 | if (retval) |
| 722 | err("%s: Write command failed!\n", __func__); | 722 | ctrl_err(ctrl, "%s: Write command failed!\n", __func__); |
| 723 | 723 | ||
| 724 | return retval; | 724 | return retval; |
| 725 | } | 725 | } |
| @@ -735,7 +735,7 @@ static irqreturn_t shpc_isr(int irq, void *dev_id) | |||
| 735 | if (!intr_loc) | 735 | if (!intr_loc) |
| 736 | return IRQ_NONE; | 736 | return IRQ_NONE; |
| 737 | 737 | ||
| 738 | dbg("%s: intr_loc = %x\n",__func__, intr_loc); | 738 | ctrl_dbg(ctrl, "%s: intr_loc = %x\n", __func__, intr_loc); |
| 739 | 739 | ||
| 740 | if(!shpchp_poll_mode) { | 740 | if(!shpchp_poll_mode) { |
| 741 | /* | 741 | /* |
| @@ -748,7 +748,7 @@ static irqreturn_t shpc_isr(int irq, void *dev_id) | |||
| 748 | shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int); | 748 | shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int); |
| 749 | 749 | ||
| 750 | intr_loc2 = shpc_readl(ctrl, INTR_LOC); | 750 | intr_loc2 = shpc_readl(ctrl, INTR_LOC); |
| 751 | dbg("%s: intr_loc2 = %x\n",__func__, intr_loc2); | 751 | ctrl_dbg(ctrl, "%s: intr_loc2 = %x\n", __func__, intr_loc2); |
| 752 | } | 752 | } |
| 753 | 753 | ||
| 754 | if (intr_loc & CMD_INTR_PENDING) { | 754 | if (intr_loc & CMD_INTR_PENDING) { |
| @@ -773,8 +773,8 @@ static irqreturn_t shpc_isr(int irq, void *dev_id) | |||
| 773 | continue; | 773 | continue; |
| 774 | 774 | ||
| 775 | slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot)); | 775 | slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot)); |
| 776 | dbg("%s: Slot %x with intr, slot register = %x\n", | 776 | ctrl_dbg(ctrl, "Slot %x with intr, slot register = %x\n", |
| 777 | __func__, hp_slot, slot_reg); | 777 | hp_slot, slot_reg); |
| 778 | 778 | ||
| 779 | if (slot_reg & MRL_CHANGE_DETECTED) | 779 | if (slot_reg & MRL_CHANGE_DETECTED) |
| 780 | shpchp_handle_switch_change(hp_slot, ctrl); | 780 | shpchp_handle_switch_change(hp_slot, ctrl); |
| @@ -843,7 +843,7 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) | |||
| 843 | } | 843 | } |
| 844 | 844 | ||
| 845 | *value = bus_speed; | 845 | *value = bus_speed; |
| 846 | dbg("Max bus speed = %d\n", bus_speed); | 846 | ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed); |
| 847 | 847 | ||
| 848 | return retval; | 848 | return retval; |
| 849 | } | 849 | } |
| @@ -911,7 +911,7 @@ static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value) | |||
| 911 | break; | 911 | break; |
| 912 | } | 912 | } |
| 913 | 913 | ||
| 914 | dbg("Current bus speed = %d\n", bus_speed); | 914 | ctrl_dbg(ctrl, "Current bus speed = %d\n", bus_speed); |
| 915 | return retval; | 915 | return retval; |
| 916 | } | 916 | } |
| 917 | 917 | ||
| @@ -949,6 +949,7 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) | |||
| 949 | u8 i; | 949 | u8 i; |
| 950 | 950 | ||
| 951 | ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */ | 951 | ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */ |
| 952 | ctrl_dbg(ctrl, "Hotplug Controller:\n"); | ||
| 952 | 953 | ||
| 953 | if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device == | 954 | if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device == |
| 954 | PCI_DEVICE_ID_AMD_GOLAM_7450)) { | 955 | PCI_DEVICE_ID_AMD_GOLAM_7450)) { |
| @@ -958,34 +959,33 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) | |||
| 958 | } else { | 959 | } else { |
| 959 | ctrl->cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC); | 960 | ctrl->cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC); |
| 960 | if (!ctrl->cap_offset) { | 961 | if (!ctrl->cap_offset) { |
| 961 | err("%s : cap_offset == 0\n", __func__); | 962 | ctrl_err(ctrl, "Cannot find PCI capability\n"); |
| 962 | goto abort; | 963 | goto abort; |
| 963 | } | 964 | } |
| 964 | dbg("%s: cap_offset = %x\n", __func__, ctrl->cap_offset); | 965 | ctrl_dbg(ctrl, " cap_offset = %x\n", ctrl->cap_offset); |
| 965 | 966 | ||
| 966 | rc = shpc_indirect_read(ctrl, 0, &shpc_base_offset); | 967 | rc = shpc_indirect_read(ctrl, 0, &shpc_base_offset); |
| 967 | if (rc) { | 968 | if (rc) { |
| 968 | err("%s: cannot read base_offset\n", __func__); | 969 | ctrl_err(ctrl, "Cannot read base_offset\n"); |
| 969 | goto abort; | 970 | goto abort; |
| 970 | } | 971 | } |
| 971 | 972 | ||
| 972 | rc = shpc_indirect_read(ctrl, 3, &tempdword); | 973 | rc = shpc_indirect_read(ctrl, 3, &tempdword); |
| 973 | if (rc) { | 974 | if (rc) { |
| 974 | err("%s: cannot read slot config\n", __func__); | 975 | ctrl_err(ctrl, "Cannot read slot config\n"); |
| 975 | goto abort; | 976 | goto abort; |
| 976 | } | 977 | } |
| 977 | num_slots = tempdword & SLOT_NUM; | 978 | num_slots = tempdword & SLOT_NUM; |
| 978 | dbg("%s: num_slots (indirect) %x\n", __func__, num_slots); | 979 | ctrl_dbg(ctrl, " num_slots (indirect) %x\n", num_slots); |
| 979 | 980 | ||
| 980 | for (i = 0; i < 9 + num_slots; i++) { | 981 | for (i = 0; i < 9 + num_slots; i++) { |
| 981 | rc = shpc_indirect_read(ctrl, i, &tempdword); | 982 | rc = shpc_indirect_read(ctrl, i, &tempdword); |
| 982 | if (rc) { | 983 | if (rc) { |
| 983 | err("%s: cannot read creg (index = %d)\n", | 984 | ctrl_err(ctrl, |
| 984 | __func__, i); | 985 | "Cannot read creg (index = %d)\n", i); |
| 985 | goto abort; | 986 | goto abort; |
| 986 | } | 987 | } |
| 987 | dbg("%s: offset %d: value %x\n", __func__,i, | 988 | ctrl_dbg(ctrl, " offset %d: value %x\n", i, tempdword); |
| 988 | tempdword); | ||
| 989 | } | 989 | } |
| 990 | 990 | ||
| 991 | ctrl->mmio_base = | 991 | ctrl->mmio_base = |
| @@ -993,30 +993,31 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) | |||
| 993 | ctrl->mmio_size = 0x24 + 0x4 * num_slots; | 993 | ctrl->mmio_size = 0x24 + 0x4 * num_slots; |
| 994 | } | 994 | } |
| 995 | 995 | ||
| 996 | info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor, | 996 | ctrl_info(ctrl, "HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", |
| 997 | pdev->subsystem_device); | 997 | pdev->vendor, pdev->device, pdev->subsystem_vendor, |
| 998 | pdev->subsystem_device); | ||
| 998 | 999 | ||
| 999 | rc = pci_enable_device(pdev); | 1000 | rc = pci_enable_device(pdev); |
| 1000 | if (rc) { | 1001 | if (rc) { |
| 1001 | err("%s: pci_enable_device failed\n", __func__); | 1002 | ctrl_err(ctrl, "pci_enable_device failed\n"); |
| 1002 | goto abort; | 1003 | goto abort; |
| 1003 | } | 1004 | } |
| 1004 | 1005 | ||
| 1005 | if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) { | 1006 | if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) { |
| 1006 | err("%s: cannot reserve MMIO region\n", __func__); | 1007 | ctrl_err(ctrl, "Cannot reserve MMIO region\n"); |
| 1007 | rc = -1; | 1008 | rc = -1; |
| 1008 | goto abort; | 1009 | goto abort; |
| 1009 | } | 1010 | } |
| 1010 | 1011 | ||
| 1011 | ctrl->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size); | 1012 | ctrl->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size); |
| 1012 | if (!ctrl->creg) { | 1013 | if (!ctrl->creg) { |
| 1013 | err("%s: cannot remap MMIO region %lx @ %lx\n", __func__, | 1014 | ctrl_err(ctrl, "Cannot remap MMIO region %lx @ %lx\n", |
| 1014 | ctrl->mmio_size, ctrl->mmio_base); | 1015 | ctrl->mmio_size, ctrl->mmio_base); |
| 1015 | release_mem_region(ctrl->mmio_base, ctrl->mmio_size); | 1016 | release_mem_region(ctrl->mmio_base, ctrl->mmio_size); |
| 1016 | rc = -1; | 1017 | rc = -1; |
| 1017 | goto abort; | 1018 | goto abort; |
| 1018 | } | 1019 | } |
| 1019 | dbg("%s: ctrl->creg %p\n", __func__, ctrl->creg); | 1020 | ctrl_dbg(ctrl, "ctrl->creg %p\n", ctrl->creg); |
| 1020 | 1021 | ||
| 1021 | mutex_init(&ctrl->crit_sect); | 1022 | mutex_init(&ctrl->crit_sect); |
| 1022 | mutex_init(&ctrl->cmd_lock); | 1023 | mutex_init(&ctrl->cmd_lock); |
| @@ -1035,21 +1036,21 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) | |||
| 1035 | 1036 | ||
| 1036 | /* Mask Global Interrupt Mask & Command Complete Interrupt Mask */ | 1037 | /* Mask Global Interrupt Mask & Command Complete Interrupt Mask */ |
| 1037 | tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); | 1038 | tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); |
| 1038 | dbg("%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword); | 1039 | ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword); |
| 1039 | tempdword |= (GLOBAL_INTR_MASK | GLOBAL_SERR_MASK | | 1040 | tempdword |= (GLOBAL_INTR_MASK | GLOBAL_SERR_MASK | |
| 1040 | COMMAND_INTR_MASK | ARBITER_SERR_MASK); | 1041 | COMMAND_INTR_MASK | ARBITER_SERR_MASK); |
| 1041 | tempdword &= ~SERR_INTR_RSVDZ_MASK; | 1042 | tempdword &= ~SERR_INTR_RSVDZ_MASK; |
| 1042 | shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword); | 1043 | shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword); |
| 1043 | tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); | 1044 | tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); |
| 1044 | dbg("%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword); | 1045 | ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword); |
| 1045 | 1046 | ||
| 1046 | /* Mask the MRL sensor SERR Mask of individual slot in | 1047 | /* Mask the MRL sensor SERR Mask of individual slot in |
| 1047 | * Slot SERR-INT Mask & clear all the existing event if any | 1048 | * Slot SERR-INT Mask & clear all the existing event if any |
| 1048 | */ | 1049 | */ |
| 1049 | for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { | 1050 | for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { |
| 1050 | slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot)); | 1051 | slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot)); |
| 1051 | dbg("%s: Default Logical Slot Register %d value %x\n", __func__, | 1052 | ctrl_dbg(ctrl, "Default Logical Slot Register %d value %x\n", |
| 1052 | hp_slot, slot_reg); | 1053 | hp_slot, slot_reg); |
| 1053 | slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK | | 1054 | slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK | |
| 1054 | BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK | | 1055 | BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK | |
| 1055 | CON_PFAULT_INTR_MASK | MRL_CHANGE_SERR_MASK | | 1056 | CON_PFAULT_INTR_MASK | MRL_CHANGE_SERR_MASK | |
| @@ -1066,24 +1067,24 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) | |||
| 1066 | /* Installs the interrupt handler */ | 1067 | /* Installs the interrupt handler */ |
| 1067 | rc = pci_enable_msi(pdev); | 1068 | rc = pci_enable_msi(pdev); |
| 1068 | if (rc) { | 1069 | if (rc) { |
| 1069 | info("Can't get msi for the hotplug controller\n"); | 1070 | ctrl_info(ctrl, |
| 1070 | info("Use INTx for the hotplug controller\n"); | 1071 | "Can't get msi for the hotplug controller\n"); |
| 1072 | ctrl_info(ctrl, | ||
| 1073 | "Use INTx for the hotplug controller\n"); | ||
| 1071 | } | 1074 | } |
| 1072 | 1075 | ||
| 1073 | rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED, | 1076 | rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED, |
| 1074 | MY_NAME, (void *)ctrl); | 1077 | MY_NAME, (void *)ctrl); |
| 1075 | dbg("%s: request_irq %d for hpc%d (returns %d)\n", | 1078 | ctrl_dbg(ctrl, "request_irq %d for hpc%d (returns %d)\n", |
| 1076 | __func__, ctrl->pci_dev->irq, | 1079 | ctrl->pci_dev->irq, |
| 1077 | atomic_read(&shpchp_num_controllers), rc); | 1080 | atomic_read(&shpchp_num_controllers), rc); |
| 1078 | if (rc) { | 1081 | if (rc) { |
| 1079 | err("Can't get irq %d for the hotplug controller\n", | 1082 | ctrl_err(ctrl, "Can't get irq %d for the hotplug " |
| 1080 | ctrl->pci_dev->irq); | 1083 | "controller\n", ctrl->pci_dev->irq); |
| 1081 | goto abort_iounmap; | 1084 | goto abort_iounmap; |
| 1082 | } | 1085 | } |
| 1083 | } | 1086 | } |
| 1084 | dbg("%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n", __func__, | 1087 | ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq); |
| 1085 | pdev->bus->number, PCI_SLOT(pdev->devfn), | ||
| 1086 | PCI_FUNC(pdev->devfn), pdev->irq); | ||
| 1087 | 1088 | ||
| 1088 | /* | 1089 | /* |
| 1089 | * If this is the first controller to be initialized, | 1090 | * If this is the first controller to be initialized, |
| @@ -1102,8 +1103,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) | |||
| 1102 | */ | 1103 | */ |
| 1103 | for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { | 1104 | for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { |
| 1104 | slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot)); | 1105 | slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot)); |
| 1105 | dbg("%s: Default Logical Slot Register %d value %x\n", __func__, | 1106 | ctrl_dbg(ctrl, "Default Logical Slot Register %d value %x\n", |
| 1106 | hp_slot, slot_reg); | 1107 | hp_slot, slot_reg); |
| 1107 | slot_reg &= ~(PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK | | 1108 | slot_reg &= ~(PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK | |
| 1108 | BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK | | 1109 | BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK | |
| 1109 | CON_PFAULT_INTR_MASK | SLOT_REG_RSVDZ_MASK); | 1110 | CON_PFAULT_INTR_MASK | SLOT_REG_RSVDZ_MASK); |
| @@ -1116,7 +1117,7 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) | |||
| 1116 | SERR_INTR_RSVDZ_MASK); | 1117 | SERR_INTR_RSVDZ_MASK); |
| 1117 | shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword); | 1118 | shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword); |
| 1118 | tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); | 1119 | tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); |
| 1119 | dbg("%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword); | 1120 | ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword); |
| 1120 | } | 1121 | } |
| 1121 | 1122 | ||
| 1122 | return 0; | 1123 | return 0; |
diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index 3fc4ec0eea0b..138f161becc0 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c | |||
| @@ -49,9 +49,7 @@ static void program_fw_provided_values(struct pci_dev *dev) | |||
| 49 | /* use default values if we can't get them from firmware */ | 49 | /* use default values if we can't get them from firmware */ |
| 50 | if (get_hp_params_from_firmware(dev, &hpp) || | 50 | if (get_hp_params_from_firmware(dev, &hpp) || |
| 51 | !hpp.t0 || (hpp.t0->revision > 1)) { | 51 | !hpp.t0 || (hpp.t0->revision > 1)) { |
| 52 | printk(KERN_WARNING | 52 | warn("Could not get hotplug parameters. Use defaults\n"); |
| 53 | "%s: Could not get hotplug parameters. Use defaults\n", | ||
| 54 | __func__); | ||
| 55 | hpp.t0 = &hpp.type0_data; | 53 | hpp.t0 = &hpp.type0_data; |
| 56 | hpp.t0->revision = 0; | 54 | hpp.t0->revision = 0; |
| 57 | hpp.t0->cache_line_size = 8; | 55 | hpp.t0->cache_line_size = 8; |
| @@ -101,18 +99,20 @@ int __ref shpchp_configure_device(struct slot *p_slot) | |||
| 101 | struct pci_dev *dev; | 99 | struct pci_dev *dev; |
| 102 | struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate; | 100 | struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate; |
| 103 | int num, fn; | 101 | int num, fn; |
| 102 | struct controller *ctrl = p_slot->ctrl; | ||
| 104 | 103 | ||
| 105 | dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0)); | 104 | dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0)); |
| 106 | if (dev) { | 105 | if (dev) { |
| 107 | err("Device %s already exists at %x:%x, cannot hot-add\n", | 106 | ctrl_err(ctrl, "Device %s already exists " |
| 108 | pci_name(dev), p_slot->bus, p_slot->device); | 107 | "at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev), |
| 108 | pci_domain_nr(parent), p_slot->bus, p_slot->device); | ||
| 109 | pci_dev_put(dev); | 109 | pci_dev_put(dev); |
| 110 | return -EINVAL; | 110 | return -EINVAL; |
| 111 | } | 111 | } |
| 112 | 112 | ||
| 113 | num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0)); | 113 | num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0)); |
| 114 | if (num == 0) { | 114 | if (num == 0) { |
| 115 | err("No new device found\n"); | 115 | ctrl_err(ctrl, "No new device found\n"); |
| 116 | return -ENODEV; | 116 | return -ENODEV; |
| 117 | } | 117 | } |
| 118 | 118 | ||
| @@ -121,8 +121,8 @@ int __ref shpchp_configure_device(struct slot *p_slot) | |||
| 121 | if (!dev) | 121 | if (!dev) |
| 122 | continue; | 122 | continue; |
| 123 | if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { | 123 | if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { |
| 124 | err("Cannot hot-add display device %s\n", | 124 | ctrl_err(ctrl, "Cannot hot-add display device %s\n", |
| 125 | pci_name(dev)); | 125 | pci_name(dev)); |
| 126 | pci_dev_put(dev); | 126 | pci_dev_put(dev); |
| 127 | continue; | 127 | continue; |
| 128 | } | 128 | } |
| @@ -138,14 +138,15 @@ int __ref shpchp_configure_device(struct slot *p_slot) | |||
| 138 | break; | 138 | break; |
| 139 | } | 139 | } |
| 140 | if (busnr >= end) { | 140 | if (busnr >= end) { |
| 141 | err("No free bus for hot-added bridge\n"); | 141 | ctrl_err(ctrl, |
| 142 | "No free bus for hot-added bridge\n"); | ||
| 142 | pci_dev_put(dev); | 143 | pci_dev_put(dev); |
| 143 | continue; | 144 | continue; |
| 144 | } | 145 | } |
| 145 | child = pci_add_new_bus(parent, dev, busnr); | 146 | child = pci_add_new_bus(parent, dev, busnr); |
| 146 | if (!child) { | 147 | if (!child) { |
| 147 | err("Cannot add new bus for %s\n", | 148 | ctrl_err(ctrl, "Cannot add new bus for %s\n", |
| 148 | pci_name(dev)); | 149 | pci_name(dev)); |
| 149 | pci_dev_put(dev); | 150 | pci_dev_put(dev); |
| 150 | continue; | 151 | continue; |
| 151 | } | 152 | } |
| @@ -168,8 +169,10 @@ int shpchp_unconfigure_device(struct slot *p_slot) | |||
| 168 | int j; | 169 | int j; |
| 169 | u8 bctl = 0; | 170 | u8 bctl = 0; |
| 170 | struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate; | 171 | struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate; |
| 172 | struct controller *ctrl = p_slot->ctrl; | ||
| 171 | 173 | ||
| 172 | dbg("%s: bus/dev = %x/%x\n", __func__, p_slot->bus, p_slot->device); | 174 | ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:%02x\n", |
| 175 | __func__, pci_domain_nr(parent), p_slot->bus, p_slot->device); | ||
| 173 | 176 | ||
| 174 | for (j=0; j<8 ; j++) { | 177 | for (j=0; j<8 ; j++) { |
| 175 | struct pci_dev* temp = pci_get_slot(parent, | 178 | struct pci_dev* temp = pci_get_slot(parent, |
| @@ -177,16 +180,17 @@ int shpchp_unconfigure_device(struct slot *p_slot) | |||
| 177 | if (!temp) | 180 | if (!temp) |
| 178 | continue; | 181 | continue; |
| 179 | if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) { | 182 | if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) { |
| 180 | err("Cannot remove display device %s\n", | 183 | ctrl_err(ctrl, "Cannot remove display device %s\n", |
| 181 | pci_name(temp)); | 184 | pci_name(temp)); |
| 182 | pci_dev_put(temp); | 185 | pci_dev_put(temp); |
| 183 | continue; | 186 | continue; |
| 184 | } | 187 | } |
| 185 | if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) { | 188 | if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) { |
| 186 | pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl); | 189 | pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl); |
| 187 | if (bctl & PCI_BRIDGE_CTL_VGA) { | 190 | if (bctl & PCI_BRIDGE_CTL_VGA) { |
| 188 | err("Cannot remove display device %s\n", | 191 | ctrl_err(ctrl, |
| 189 | pci_name(temp)); | 192 | "Cannot remove display device %s\n", |
| 193 | pci_name(temp)); | ||
| 190 | pci_dev_put(temp); | 194 | pci_dev_put(temp); |
| 191 | continue; | 195 | continue; |
| 192 | } | 196 | } |
diff --git a/drivers/pci/irq.c b/drivers/pci/irq.c new file mode 100644 index 000000000000..6441dfa969a3 --- /dev/null +++ b/drivers/pci/irq.c | |||
| @@ -0,0 +1,60 @@ | |||
| 1 | /* | ||
| 2 | * PCI IRQ failure handing code | ||
| 3 | * | ||
| 4 | * Copyright (c) 2008 James Bottomley <James.Bottomley@HansenPartnership.com> | ||
| 5 | */ | ||
| 6 | |||
| 7 | #include <linux/acpi.h> | ||
| 8 | #include <linux/device.h> | ||
| 9 | #include <linux/kernel.h> | ||
| 10 | #include <linux/pci.h> | ||
| 11 | |||
| 12 | static void pci_note_irq_problem(struct pci_dev *pdev, const char *reason) | ||
| 13 | { | ||
| 14 | struct pci_dev *parent = to_pci_dev(pdev->dev.parent); | ||
| 15 | |||
| 16 | dev_printk(KERN_ERR, &pdev->dev, | ||
| 17 | "Potentially misrouted IRQ (Bridge %s %04x:%04x)\n", | ||
| 18 | parent->dev.bus_id, parent->vendor, parent->device); | ||
| 19 | dev_printk(KERN_ERR, &pdev->dev, "%s\n", reason); | ||
| 20 | dev_printk(KERN_ERR, &pdev->dev, "Please report to linux-kernel@vger.kernel.org\n"); | ||
| 21 | WARN_ON(1); | ||
| 22 | } | ||
| 23 | |||
| 24 | /** | ||
| 25 | * pci_lost_interrupt - reports a lost PCI interrupt | ||
| 26 | * @pdev: device whose interrupt is lost | ||
| 27 | * | ||
| 28 | * The primary function of this routine is to report a lost interrupt | ||
| 29 | * in a standard way which users can recognise (instead of blaming the | ||
| 30 | * driver). | ||
| 31 | * | ||
| 32 | * Returns: | ||
| 33 | * a suggestion for fixing it (although the driver is not required to | ||
| 34 | * act on this). | ||
| 35 | */ | ||
| 36 | enum pci_lost_interrupt_reason pci_lost_interrupt(struct pci_dev *pdev) | ||
| 37 | { | ||
| 38 | if (pdev->msi_enabled || pdev->msix_enabled) { | ||
| 39 | enum pci_lost_interrupt_reason ret; | ||
| 40 | |||
| 41 | if (pdev->msix_enabled) { | ||
| 42 | pci_note_irq_problem(pdev, "MSIX routing failure"); | ||
| 43 | ret = PCI_LOST_IRQ_DISABLE_MSIX; | ||
| 44 | } else { | ||
| 45 | pci_note_irq_problem(pdev, "MSI routing failure"); | ||
| 46 | ret = PCI_LOST_IRQ_DISABLE_MSI; | ||
| 47 | } | ||
| 48 | return ret; | ||
| 49 | } | ||
| 50 | #ifdef CONFIG_ACPI | ||
| 51 | if (!(acpi_disabled || acpi_noirq)) { | ||
| 52 | pci_note_irq_problem(pdev, "Potential ACPI misrouting please reboot with acpi=noirq"); | ||
| 53 | /* currently no way to fix acpi on the fly */ | ||
| 54 | return PCI_LOST_IRQ_DISABLE_ACPI; | ||
| 55 | } | ||
| 56 | #endif | ||
| 57 | pci_note_irq_problem(pdev, "unknown cause (not MSI or ACPI)"); | ||
| 58 | return PCI_LOST_IRQ_NO_INFORMATION; | ||
| 59 | } | ||
| 60 | EXPORT_SYMBOL(pci_lost_interrupt); | ||
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 533aeb5fcbe4..21f2ac639cab 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c | |||
| @@ -1309,27 +1309,32 @@ void pci_enable_ari(struct pci_dev *dev) | |||
| 1309 | int pos; | 1309 | int pos; |
| 1310 | u32 cap; | 1310 | u32 cap; |
| 1311 | u16 ctrl; | 1311 | u16 ctrl; |
| 1312 | struct pci_dev *bridge; | ||
| 1312 | 1313 | ||
| 1313 | if (!dev->is_pcie) | 1314 | if (!dev->is_pcie || dev->devfn) |
| 1314 | return; | 1315 | return; |
| 1315 | 1316 | ||
| 1316 | if (dev->pcie_type != PCI_EXP_TYPE_ROOT_PORT && | 1317 | pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI); |
| 1317 | dev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) | 1318 | if (!pos) |
| 1318 | return; | 1319 | return; |
| 1319 | 1320 | ||
| 1320 | pos = pci_find_capability(dev, PCI_CAP_ID_EXP); | 1321 | bridge = dev->bus->self; |
| 1322 | if (!bridge || !bridge->is_pcie) | ||
| 1323 | return; | ||
| 1324 | |||
| 1325 | pos = pci_find_capability(bridge, PCI_CAP_ID_EXP); | ||
| 1321 | if (!pos) | 1326 | if (!pos) |
| 1322 | return; | 1327 | return; |
| 1323 | 1328 | ||
| 1324 | pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP2, &cap); | 1329 | pci_read_config_dword(bridge, pos + PCI_EXP_DEVCAP2, &cap); |
| 1325 | if (!(cap & PCI_EXP_DEVCAP2_ARI)) | 1330 | if (!(cap & PCI_EXP_DEVCAP2_ARI)) |
| 1326 | return; | 1331 | return; |
| 1327 | 1332 | ||
| 1328 | pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl); | 1333 | pci_read_config_word(bridge, pos + PCI_EXP_DEVCTL2, &ctrl); |
| 1329 | ctrl |= PCI_EXP_DEVCTL2_ARI; | 1334 | ctrl |= PCI_EXP_DEVCTL2_ARI; |
| 1330 | pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl); | 1335 | pci_write_config_word(bridge, pos + PCI_EXP_DEVCTL2, ctrl); |
| 1331 | 1336 | ||
| 1332 | dev->ari_enabled = 1; | 1337 | bridge->ari_enabled = 1; |
| 1333 | } | 1338 | } |
| 1334 | 1339 | ||
| 1335 | int | 1340 | int |
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 6f1e51d77bce..003a9b3c293f 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c | |||
| @@ -298,9 +298,6 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) | |||
| 298 | child->resource[i] = child->parent->resource[i - 3]; | 298 | child->resource[i] = child->parent->resource[i - 3]; |
| 299 | } | 299 | } |
| 300 | 300 | ||
| 301 | for(i=0; i<3; i++) | ||
| 302 | child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i]; | ||
| 303 | |||
| 304 | res = child->resource[0]; | 301 | res = child->resource[0]; |
| 305 | pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo); | 302 | pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo); |
| 306 | pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo); | 303 | pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo); |
