aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/char/hw_random/omap-rng.c2
-rw-r--r--drivers/mmc/host/Kconfig10
-rw-r--r--drivers/mmc/host/Makefile1
-rw-r--r--drivers/mmc/host/omap_hsmmc.c1242
-rw-r--r--drivers/mmc/host/s3cmci.c2
-rw-r--r--drivers/mtd/onenand/omap2.c6
-rw-r--r--drivers/net/arm/am79c961a.c20
-rw-r--r--drivers/usb/host/ohci-omap.c6
-rw-r--r--drivers/video/omap/lcdc.c4
-rw-r--r--drivers/watchdog/Kconfig6
-rw-r--r--drivers/watchdog/at91rm9200_wdt.c1
11 files changed, 1277 insertions, 23 deletions
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index d4e7dca06e4f..ba68a4671cb5 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -102,7 +102,7 @@ static int __init omap_rng_probe(struct platform_device *pdev)
102 return -EBUSY; 102 return -EBUSY;
103 103
104 if (cpu_is_omap24xx()) { 104 if (cpu_is_omap24xx()) {
105 rng_ick = clk_get(NULL, "rng_ick"); 105 rng_ick = clk_get(&pdev->dev, "rng_ick");
106 if (IS_ERR(rng_ick)) { 106 if (IS_ERR(rng_ick)) {
107 dev_err(&pdev->dev, "Could not get rng_ick\n"); 107 dev_err(&pdev->dev, "Could not get rng_ick\n");
108 ret = PTR_ERR(rng_ick); 108 ret = PTR_ERR(rng_ick);
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index dfa585f7feaf..0efa390978bd 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -76,6 +76,16 @@ config MMC_OMAP
76 76
77 If unsure, say N. 77 If unsure, say N.
78 78
79config MMC_OMAP_HS
80 tristate "TI OMAP High Speed Multimedia Card Interface support"
81 depends on ARCH_OMAP2430 || ARCH_OMAP3
82 help
83 This selects the TI OMAP High Speed Multimedia card Interface.
84 If you have an OMAP2430 or OMAP3 board with a Multimedia Card slot,
85 say Y or M here.
86
87 If unsure, say N.
88
79config MMC_WBSD 89config MMC_WBSD
80 tristate "Winbond W83L51xD SD/MMC Card Interface support" 90 tristate "Winbond W83L51xD SD/MMC Card Interface support"
81 depends on ISA_DMA_API 91 depends on ISA_DMA_API
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index f4853288bbb1..98cab84829b8 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o
15obj-$(CONFIG_MMC_WBSD) += wbsd.o 15obj-$(CONFIG_MMC_WBSD) += wbsd.o
16obj-$(CONFIG_MMC_AU1X) += au1xmmc.o 16obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
17obj-$(CONFIG_MMC_OMAP) += omap.o 17obj-$(CONFIG_MMC_OMAP) += omap.o
18obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o
18obj-$(CONFIG_MMC_AT91) += at91_mci.o 19obj-$(CONFIG_MMC_AT91) += at91_mci.o
19obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o 20obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
20obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o 21obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
new file mode 100644
index 000000000000..db37490f67ec
--- /dev/null
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -0,0 +1,1242 @@
1/*
2 * drivers/mmc/host/omap_hsmmc.c
3 *
4 * Driver for OMAP2430/3430 MMC controller.
5 *
6 * Copyright (C) 2007 Texas Instruments.
7 *
8 * Authors:
9 * Syed Mohammed Khasim <x0khasim@ti.com>
10 * Madhusudhan <madhu.cr@ti.com>
11 * Mohit Jalori <mjalori@ti.com>
12 *
13 * This file is licensed under the terms of the GNU General Public License
14 * version 2. This program is licensed "as is" without any warranty of any
15 * kind, whether express or implied.
16 */
17
18#include <linux/module.h>
19#include <linux/init.h>
20#include <linux/interrupt.h>
21#include <linux/delay.h>
22#include <linux/dma-mapping.h>
23#include <linux/platform_device.h>
24#include <linux/workqueue.h>
25#include <linux/timer.h>
26#include <linux/clk.h>
27#include <linux/mmc/host.h>
28#include <linux/io.h>
29#include <linux/semaphore.h>
30#include <mach/dma.h>
31#include <mach/hardware.h>
32#include <mach/board.h>
33#include <mach/mmc.h>
34#include <mach/cpu.h>
35
36/* OMAP HSMMC Host Controller Registers */
37#define OMAP_HSMMC_SYSCONFIG 0x0010
38#define OMAP_HSMMC_CON 0x002C
39#define OMAP_HSMMC_BLK 0x0104
40#define OMAP_HSMMC_ARG 0x0108
41#define OMAP_HSMMC_CMD 0x010C
42#define OMAP_HSMMC_RSP10 0x0110
43#define OMAP_HSMMC_RSP32 0x0114
44#define OMAP_HSMMC_RSP54 0x0118
45#define OMAP_HSMMC_RSP76 0x011C
46#define OMAP_HSMMC_DATA 0x0120
47#define OMAP_HSMMC_HCTL 0x0128
48#define OMAP_HSMMC_SYSCTL 0x012C
49#define OMAP_HSMMC_STAT 0x0130
50#define OMAP_HSMMC_IE 0x0134
51#define OMAP_HSMMC_ISE 0x0138
52#define OMAP_HSMMC_CAPA 0x0140
53
54#define VS18 (1 << 26)
55#define VS30 (1 << 25)
56#define SDVS18 (0x5 << 9)
57#define SDVS30 (0x6 << 9)
58#define SDVSCLR 0xFFFFF1FF
59#define SDVSDET 0x00000400
60#define AUTOIDLE 0x1
61#define SDBP (1 << 8)
62#define DTO 0xe
63#define ICE 0x1
64#define ICS 0x2
65#define CEN (1 << 2)
66#define CLKD_MASK 0x0000FFC0
67#define CLKD_SHIFT 6
68#define DTO_MASK 0x000F0000
69#define DTO_SHIFT 16
70#define INT_EN_MASK 0x307F0033
71#define INIT_STREAM (1 << 1)
72#define DP_SELECT (1 << 21)
73#define DDIR (1 << 4)
74#define DMA_EN 0x1
75#define MSBS (1 << 5)
76#define BCE (1 << 1)
77#define FOUR_BIT (1 << 1)
78#define CC 0x1
79#define TC 0x02
80#define OD 0x1
81#define ERR (1 << 15)
82#define CMD_TIMEOUT (1 << 16)
83#define DATA_TIMEOUT (1 << 20)
84#define CMD_CRC (1 << 17)
85#define DATA_CRC (1 << 21)
86#define CARD_ERR (1 << 28)
87#define STAT_CLEAR 0xFFFFFFFF
88#define INIT_STREAM_CMD 0x00000000
89#define DUAL_VOLT_OCR_BIT 7
90#define SRC (1 << 25)
91#define SRD (1 << 26)
92
93/*
94 * FIXME: Most likely all the data using these _DEVID defines should come
95 * from the platform_data, or implemented in controller and slot specific
96 * functions.
97 */
98#define OMAP_MMC1_DEVID 0
99#define OMAP_MMC2_DEVID 1
100
101#define OMAP_MMC_DATADIR_NONE 0
102#define OMAP_MMC_DATADIR_READ 1
103#define OMAP_MMC_DATADIR_WRITE 2
104#define MMC_TIMEOUT_MS 20
105#define OMAP_MMC_MASTER_CLOCK 96000000
106#define DRIVER_NAME "mmci-omap-hs"
107
108/*
109 * One controller can have multiple slots, like on some omap boards using
110 * omap.c controller driver. Luckily this is not currently done on any known
111 * omap_hsmmc.c device.
112 */
113#define mmc_slot(host) (host->pdata->slots[host->slot_id])
114
115/*
116 * MMC Host controller read/write API's
117 */
118#define OMAP_HSMMC_READ(base, reg) \
119 __raw_readl((base) + OMAP_HSMMC_##reg)
120
121#define OMAP_HSMMC_WRITE(base, reg, val) \
122 __raw_writel((val), (base) + OMAP_HSMMC_##reg)
123
124struct mmc_omap_host {
125 struct device *dev;
126 struct mmc_host *mmc;
127 struct mmc_request *mrq;
128 struct mmc_command *cmd;
129 struct mmc_data *data;
130 struct clk *fclk;
131 struct clk *iclk;
132 struct clk *dbclk;
133 struct semaphore sem;
134 struct work_struct mmc_carddetect_work;
135 void __iomem *base;
136 resource_size_t mapbase;
137 unsigned int id;
138 unsigned int dma_len;
139 unsigned int dma_dir;
140 unsigned char bus_mode;
141 unsigned char datadir;
142 u32 *buffer;
143 u32 bytesleft;
144 int suspended;
145 int irq;
146 int carddetect;
147 int use_dma, dma_ch;
148 int initstr;
149 int slot_id;
150 int dbclk_enabled;
151 struct omap_mmc_platform_data *pdata;
152};
153
154/*
155 * Stop clock to the card
156 */
157static void omap_mmc_stop_clock(struct mmc_omap_host *host)
158{
159 OMAP_HSMMC_WRITE(host->base, SYSCTL,
160 OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN);
161 if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0)
162 dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n");
163}
164
165/*
166 * Send init stream sequence to card
167 * before sending IDLE command
168 */
169static void send_init_stream(struct mmc_omap_host *host)
170{
171 int reg = 0;
172 unsigned long timeout;
173
174 disable_irq(host->irq);
175 OMAP_HSMMC_WRITE(host->base, CON,
176 OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM);
177 OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD);
178
179 timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
180 while ((reg != CC) && time_before(jiffies, timeout))
181 reg = OMAP_HSMMC_READ(host->base, STAT) & CC;
182
183 OMAP_HSMMC_WRITE(host->base, CON,
184 OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM);
185 enable_irq(host->irq);
186}
187
188static inline
189int mmc_omap_cover_is_closed(struct mmc_omap_host *host)
190{
191 int r = 1;
192
193 if (host->pdata->slots[host->slot_id].get_cover_state)
194 r = host->pdata->slots[host->slot_id].get_cover_state(host->dev,
195 host->slot_id);
196 return r;
197}
198
199static ssize_t
200mmc_omap_show_cover_switch(struct device *dev, struct device_attribute *attr,
201 char *buf)
202{
203 struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
204 struct mmc_omap_host *host = mmc_priv(mmc);
205
206 return sprintf(buf, "%s\n", mmc_omap_cover_is_closed(host) ? "closed" :
207 "open");
208}
209
210static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL);
211
212static ssize_t
213mmc_omap_show_slot_name(struct device *dev, struct device_attribute *attr,
214 char *buf)
215{
216 struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
217 struct mmc_omap_host *host = mmc_priv(mmc);
218 struct omap_mmc_slot_data slot = host->pdata->slots[host->slot_id];
219
220 return sprintf(buf, "slot:%s\n", slot.name);
221}
222
223static DEVICE_ATTR(slot_name, S_IRUGO, mmc_omap_show_slot_name, NULL);
224
225/*
226 * Configure the response type and send the cmd.
227 */
228static void
229mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd,
230 struct mmc_data *data)
231{
232 int cmdreg = 0, resptype = 0, cmdtype = 0;
233
234 dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n",
235 mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
236 host->cmd = cmd;
237
238 /*
239 * Clear status bits and enable interrupts
240 */
241 OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
242 OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
243 OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
244
245 if (cmd->flags & MMC_RSP_PRESENT) {
246 if (cmd->flags & MMC_RSP_136)
247 resptype = 1;
248 else
249 resptype = 2;
250 }
251
252 /*
253 * Unlike OMAP1 controller, the cmdtype does not seem to be based on
254 * ac, bc, adtc, bcr. Only commands ending an open ended transfer need
255 * a val of 0x3, rest 0x0.
256 */
257 if (cmd == host->mrq->stop)
258 cmdtype = 0x3;
259
260 cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
261
262 if (data) {
263 cmdreg |= DP_SELECT | MSBS | BCE;
264 if (data->flags & MMC_DATA_READ)
265 cmdreg |= DDIR;
266 else
267 cmdreg &= ~(DDIR);
268 }
269
270 if (host->use_dma)
271 cmdreg |= DMA_EN;
272
273 OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg);
274 OMAP_HSMMC_WRITE(host->base, CMD, cmdreg);
275}
276
277/*
278 * Notify the transfer complete to MMC core
279 */
280static void
281mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
282{
283 host->data = NULL;
284
285 if (host->use_dma && host->dma_ch != -1)
286 dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
287 host->dma_dir);
288
289 host->datadir = OMAP_MMC_DATADIR_NONE;
290
291 if (!data->error)
292 data->bytes_xfered += data->blocks * (data->blksz);
293 else
294 data->bytes_xfered = 0;
295
296 if (!data->stop) {
297 host->mrq = NULL;
298 mmc_request_done(host->mmc, data->mrq);
299 return;
300 }
301 mmc_omap_start_command(host, data->stop, NULL);
302}
303
304/*
305 * Notify the core about command completion
306 */
307static void
308mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
309{
310 host->cmd = NULL;
311
312 if (cmd->flags & MMC_RSP_PRESENT) {
313 if (cmd->flags & MMC_RSP_136) {
314 /* response type 2 */
315 cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10);
316 cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32);
317 cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54);
318 cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76);
319 } else {
320 /* response types 1, 1b, 3, 4, 5, 6 */
321 cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10);
322 }
323 }
324 if (host->data == NULL || cmd->error) {
325 host->mrq = NULL;
326 mmc_request_done(host->mmc, cmd->mrq);
327 }
328}
329
330/*
331 * DMA clean up for command errors
332 */
333static void mmc_dma_cleanup(struct mmc_omap_host *host)
334{
335 host->data->error = -ETIMEDOUT;
336
337 if (host->use_dma && host->dma_ch != -1) {
338 dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
339 host->dma_dir);
340 omap_free_dma(host->dma_ch);
341 host->dma_ch = -1;
342 up(&host->sem);
343 }
344 host->data = NULL;
345 host->datadir = OMAP_MMC_DATADIR_NONE;
346}
347
348/*
349 * Readable error output
350 */
351#ifdef CONFIG_MMC_DEBUG
352static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status)
353{
354 /* --- means reserved bit without definition at documentation */
355 static const char *mmc_omap_status_bits[] = {
356 "CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ",
357 "OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC",
358 "CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---",
359 "---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---"
360 };
361 char res[256];
362 char *buf = res;
363 int len, i;
364
365 len = sprintf(buf, "MMC IRQ 0x%x :", status);
366 buf += len;
367
368 for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++)
369 if (status & (1 << i)) {
370 len = sprintf(buf, " %s", mmc_omap_status_bits[i]);
371 buf += len;
372 }
373
374 dev_dbg(mmc_dev(host->mmc), "%s\n", res);
375}
376#endif /* CONFIG_MMC_DEBUG */
377
378
379/*
380 * MMC controller IRQ handler
381 */
382static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
383{
384 struct mmc_omap_host *host = dev_id;
385 struct mmc_data *data;
386 int end_cmd = 0, end_trans = 0, status;
387
388 if (host->cmd == NULL && host->data == NULL) {
389 OMAP_HSMMC_WRITE(host->base, STAT,
390 OMAP_HSMMC_READ(host->base, STAT));
391 return IRQ_HANDLED;
392 }
393
394 data = host->data;
395 status = OMAP_HSMMC_READ(host->base, STAT);
396 dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
397
398 if (status & ERR) {
399#ifdef CONFIG_MMC_DEBUG
400 mmc_omap_report_irq(host, status);
401#endif
402 if ((status & CMD_TIMEOUT) ||
403 (status & CMD_CRC)) {
404 if (host->cmd) {
405 if (status & CMD_TIMEOUT) {
406 OMAP_HSMMC_WRITE(host->base, SYSCTL,
407 OMAP_HSMMC_READ(host->base,
408 SYSCTL) | SRC);
409 while (OMAP_HSMMC_READ(host->base,
410 SYSCTL) & SRC)
411 ;
412
413 host->cmd->error = -ETIMEDOUT;
414 } else {
415 host->cmd->error = -EILSEQ;
416 }
417 end_cmd = 1;
418 }
419 if (host->data)
420 mmc_dma_cleanup(host);
421 }
422 if ((status & DATA_TIMEOUT) ||
423 (status & DATA_CRC)) {
424 if (host->data) {
425 if (status & DATA_TIMEOUT)
426 mmc_dma_cleanup(host);
427 else
428 host->data->error = -EILSEQ;
429 OMAP_HSMMC_WRITE(host->base, SYSCTL,
430 OMAP_HSMMC_READ(host->base,
431 SYSCTL) | SRD);
432 while (OMAP_HSMMC_READ(host->base,
433 SYSCTL) & SRD)
434 ;
435 end_trans = 1;
436 }
437 }
438 if (status & CARD_ERR) {
439 dev_dbg(mmc_dev(host->mmc),
440 "Ignoring card err CMD%d\n", host->cmd->opcode);
441 if (host->cmd)
442 end_cmd = 1;
443 if (host->data)
444 end_trans = 1;
445 }
446 }
447
448 OMAP_HSMMC_WRITE(host->base, STAT, status);
449
450 if (end_cmd || (status & CC))
451 mmc_omap_cmd_done(host, host->cmd);
452 if (end_trans || (status & TC))
453 mmc_omap_xfer_done(host, data);
454
455 return IRQ_HANDLED;
456}
457
458/*
459 * Switch MMC operating voltage
460 */
461static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
462{
463 u32 reg_val = 0;
464 int ret;
465
466 /* Disable the clocks */
467 clk_disable(host->fclk);
468 clk_disable(host->iclk);
469 clk_disable(host->dbclk);
470
471 /* Turn the power off */
472 ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
473 if (ret != 0)
474 goto err;
475
476 /* Turn the power ON with given VDD 1.8 or 3.0v */
477 ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
478 if (ret != 0)
479 goto err;
480
481 clk_enable(host->fclk);
482 clk_enable(host->iclk);
483 clk_enable(host->dbclk);
484
485 OMAP_HSMMC_WRITE(host->base, HCTL,
486 OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
487 reg_val = OMAP_HSMMC_READ(host->base, HCTL);
488 /*
489 * If a MMC dual voltage card is detected, the set_ios fn calls
490 * this fn with VDD bit set for 1.8V. Upon card removal from the
491 * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
492 *
493 * Only MMC1 supports 3.0V. MMC2 will not function if SDVS30 is
494 * set in HCTL.
495 */
496 if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) ||
497 ((1 << vdd) == MMC_VDD_33_34)))
498 reg_val |= SDVS30;
499 if ((1 << vdd) == MMC_VDD_165_195)
500 reg_val |= SDVS18;
501
502 OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
503
504 OMAP_HSMMC_WRITE(host->base, HCTL,
505 OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
506
507 return 0;
508err:
509 dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
510 return ret;
511}
512
513/*
514 * Work Item to notify the core about card insertion/removal
515 */
516static void mmc_omap_detect(struct work_struct *work)
517{
518 struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
519 mmc_carddetect_work);
520
521 sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
522 if (host->carddetect) {
523 mmc_detect_change(host->mmc, (HZ * 200) / 1000);
524 } else {
525 OMAP_HSMMC_WRITE(host->base, SYSCTL,
526 OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
527 while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
528 ;
529
530 mmc_detect_change(host->mmc, (HZ * 50) / 1000);
531 }
532}
533
534/*
535 * ISR for handling card insertion and removal
536 */
537static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id)
538{
539 struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id;
540
541 host->carddetect = mmc_slot(host).card_detect(irq);
542 schedule_work(&host->mmc_carddetect_work);
543
544 return IRQ_HANDLED;
545}
546
547/*
548 * DMA call back function
549 */
550static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data)
551{
552 struct mmc_omap_host *host = data;
553
554 if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ)
555 dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n");
556
557 if (host->dma_ch < 0)
558 return;
559
560 omap_free_dma(host->dma_ch);
561 host->dma_ch = -1;
562 /*
563 * DMA Callback: run in interrupt context.
564 * mutex_unlock will through a kernel warning if used.
565 */
566 up(&host->sem);
567}
568
569/*
570 * Configure dma src and destination parameters
571 */
572static int mmc_omap_config_dma_param(int sync_dir, struct mmc_omap_host *host,
573 struct mmc_data *data)
574{
575 if (sync_dir == 0) {
576 omap_set_dma_dest_params(host->dma_ch, 0,
577 OMAP_DMA_AMODE_CONSTANT,
578 (host->mapbase + OMAP_HSMMC_DATA), 0, 0);
579 omap_set_dma_src_params(host->dma_ch, 0,
580 OMAP_DMA_AMODE_POST_INC,
581 sg_dma_address(&data->sg[0]), 0, 0);
582 } else {
583 omap_set_dma_src_params(host->dma_ch, 0,
584 OMAP_DMA_AMODE_CONSTANT,
585 (host->mapbase + OMAP_HSMMC_DATA), 0, 0);
586 omap_set_dma_dest_params(host->dma_ch, 0,
587 OMAP_DMA_AMODE_POST_INC,
588 sg_dma_address(&data->sg[0]), 0, 0);
589 }
590 return 0;
591}
592/*
593 * Routine to configure and start DMA for the MMC card
594 */
595static int
596mmc_omap_start_dma_transfer(struct mmc_omap_host *host, struct mmc_request *req)
597{
598 int sync_dev, sync_dir = 0;
599 int dma_ch = 0, ret = 0, err = 1;
600 struct mmc_data *data = req->data;
601
602 /*
603 * If for some reason the DMA transfer is still active,
604 * we wait for timeout period and free the dma
605 */
606 if (host->dma_ch != -1) {
607 set_current_state(TASK_UNINTERRUPTIBLE);
608 schedule_timeout(100);
609 if (down_trylock(&host->sem)) {
610 omap_free_dma(host->dma_ch);
611 host->dma_ch = -1;
612 up(&host->sem);
613 return err;
614 }
615 } else {
616 if (down_trylock(&host->sem))
617 return err;
618 }
619
620 if (!(data->flags & MMC_DATA_WRITE)) {
621 host->dma_dir = DMA_FROM_DEVICE;
622 if (host->id == OMAP_MMC1_DEVID)
623 sync_dev = OMAP24XX_DMA_MMC1_RX;
624 else
625 sync_dev = OMAP24XX_DMA_MMC2_RX;
626 } else {
627 host->dma_dir = DMA_TO_DEVICE;
628 if (host->id == OMAP_MMC1_DEVID)
629 sync_dev = OMAP24XX_DMA_MMC1_TX;
630 else
631 sync_dev = OMAP24XX_DMA_MMC2_TX;
632 }
633
634 ret = omap_request_dma(sync_dev, "MMC/SD", mmc_omap_dma_cb,
635 host, &dma_ch);
636 if (ret != 0) {
637 dev_dbg(mmc_dev(host->mmc),
638 "%s: omap_request_dma() failed with %d\n",
639 mmc_hostname(host->mmc), ret);
640 return ret;
641 }
642
643 host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
644 data->sg_len, host->dma_dir);
645 host->dma_ch = dma_ch;
646
647 if (!(data->flags & MMC_DATA_WRITE))
648 mmc_omap_config_dma_param(1, host, data);
649 else
650 mmc_omap_config_dma_param(0, host, data);
651
652 if ((data->blksz % 4) == 0)
653 omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32,
654 (data->blksz / 4), data->blocks, OMAP_DMA_SYNC_FRAME,
655 sync_dev, sync_dir);
656 else
657 /* REVISIT: The MMC buffer increments only when MSB is written.
658 * Return error for blksz which is non multiple of four.
659 */
660 return -EINVAL;
661
662 omap_start_dma(dma_ch);
663 return 0;
664}
665
666static void set_data_timeout(struct mmc_omap_host *host,
667 struct mmc_request *req)
668{
669 unsigned int timeout, cycle_ns;
670 uint32_t reg, clkd, dto = 0;
671
672 reg = OMAP_HSMMC_READ(host->base, SYSCTL);
673 clkd = (reg & CLKD_MASK) >> CLKD_SHIFT;
674 if (clkd == 0)
675 clkd = 1;
676
677 cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd);
678 timeout = req->data->timeout_ns / cycle_ns;
679 timeout += req->data->timeout_clks;
680 if (timeout) {
681 while ((timeout & 0x80000000) == 0) {
682 dto += 1;
683 timeout <<= 1;
684 }
685 dto = 31 - dto;
686 timeout <<= 1;
687 if (timeout && dto)
688 dto += 1;
689 if (dto >= 13)
690 dto -= 13;
691 else
692 dto = 0;
693 if (dto > 14)
694 dto = 14;
695 }
696
697 reg &= ~DTO_MASK;
698 reg |= dto << DTO_SHIFT;
699 OMAP_HSMMC_WRITE(host->base, SYSCTL, reg);
700}
701
702/*
703 * Configure block length for MMC/SD cards and initiate the transfer.
704 */
705static int
706mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
707{
708 int ret;
709 host->data = req->data;
710
711 if (req->data == NULL) {
712 host->datadir = OMAP_MMC_DATADIR_NONE;
713 OMAP_HSMMC_WRITE(host->base, BLK, 0);
714 return 0;
715 }
716
717 OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz)
718 | (req->data->blocks << 16));
719 set_data_timeout(host, req);
720
721 host->datadir = (req->data->flags & MMC_DATA_WRITE) ?
722 OMAP_MMC_DATADIR_WRITE : OMAP_MMC_DATADIR_READ;
723
724 if (host->use_dma) {
725 ret = mmc_omap_start_dma_transfer(host, req);
726 if (ret != 0) {
727 dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n");
728 return ret;
729 }
730 }
731 return 0;
732}
733
734/*
735 * Request function. for read/write operation
736 */
737static void omap_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
738{
739 struct mmc_omap_host *host = mmc_priv(mmc);
740
741 WARN_ON(host->mrq != NULL);
742 host->mrq = req;
743 mmc_omap_prepare_data(host, req);
744 mmc_omap_start_command(host, req->cmd, req->data);
745}
746
747
748/* Routine to configure clock values. Exposed API to core */
749static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
750{
751 struct mmc_omap_host *host = mmc_priv(mmc);
752 u16 dsor = 0;
753 unsigned long regval;
754 unsigned long timeout;
755
756 switch (ios->power_mode) {
757 case MMC_POWER_OFF:
758 mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
759 /*
760 * Reset bus voltage to 3V if it got set to 1.8V earlier.
761 * REVISIT: If we are able to detect cards after unplugging
762 * a 1.8V card, this code should not be needed.
763 */
764 if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
765 int vdd = fls(host->mmc->ocr_avail) - 1;
766 if (omap_mmc_switch_opcond(host, vdd) != 0)
767 host->mmc->ios.vdd = vdd;
768 }
769 break;
770 case MMC_POWER_UP:
771 mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd);
772 break;
773 }
774
775 switch (mmc->ios.bus_width) {
776 case MMC_BUS_WIDTH_4:
777 OMAP_HSMMC_WRITE(host->base, HCTL,
778 OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT);
779 break;
780 case MMC_BUS_WIDTH_1:
781 OMAP_HSMMC_WRITE(host->base, HCTL,
782 OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT);
783 break;
784 }
785
786 if (host->id == OMAP_MMC1_DEVID) {
787 /* Only MMC1 can operate at 3V/1.8V */
788 if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
789 (ios->vdd == DUAL_VOLT_OCR_BIT)) {
790 /*
791 * The mmc_select_voltage fn of the core does
792 * not seem to set the power_mode to
793 * MMC_POWER_UP upon recalculating the voltage.
794 * vdd 1.8v.
795 */
796 if (omap_mmc_switch_opcond(host, ios->vdd) != 0)
797 dev_dbg(mmc_dev(host->mmc),
798 "Switch operation failed\n");
799 }
800 }
801
802 if (ios->clock) {
803 dsor = OMAP_MMC_MASTER_CLOCK / ios->clock;
804 if (dsor < 1)
805 dsor = 1;
806
807 if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock)
808 dsor++;
809
810 if (dsor > 250)
811 dsor = 250;
812 }
813 omap_mmc_stop_clock(host);
814 regval = OMAP_HSMMC_READ(host->base, SYSCTL);
815 regval = regval & ~(CLKD_MASK);
816 regval = regval | (dsor << 6) | (DTO << 16);
817 OMAP_HSMMC_WRITE(host->base, SYSCTL, regval);
818 OMAP_HSMMC_WRITE(host->base, SYSCTL,
819 OMAP_HSMMC_READ(host->base, SYSCTL) | ICE);
820
821 /* Wait till the ICS bit is set */
822 timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
823 while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != 0x2
824 && time_before(jiffies, timeout))
825 msleep(1);
826
827 OMAP_HSMMC_WRITE(host->base, SYSCTL,
828 OMAP_HSMMC_READ(host->base, SYSCTL) | CEN);
829
830 if (ios->power_mode == MMC_POWER_ON)
831 send_init_stream(host);
832
833 if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
834 OMAP_HSMMC_WRITE(host->base, CON,
835 OMAP_HSMMC_READ(host->base, CON) | OD);
836}
837
838static int omap_hsmmc_get_cd(struct mmc_host *mmc)
839{
840 struct mmc_omap_host *host = mmc_priv(mmc);
841 struct omap_mmc_platform_data *pdata = host->pdata;
842
843 if (!pdata->slots[0].card_detect)
844 return -ENOSYS;
845 return pdata->slots[0].card_detect(pdata->slots[0].card_detect_irq);
846}
847
848static int omap_hsmmc_get_ro(struct mmc_host *mmc)
849{
850 struct mmc_omap_host *host = mmc_priv(mmc);
851 struct omap_mmc_platform_data *pdata = host->pdata;
852
853 if (!pdata->slots[0].get_ro)
854 return -ENOSYS;
855 return pdata->slots[0].get_ro(host->dev, 0);
856}
857
858static struct mmc_host_ops mmc_omap_ops = {
859 .request = omap_mmc_request,
860 .set_ios = omap_mmc_set_ios,
861 .get_cd = omap_hsmmc_get_cd,
862 .get_ro = omap_hsmmc_get_ro,
863 /* NYET -- enable_sdio_irq */
864};
865
866static int __init omap_mmc_probe(struct platform_device *pdev)
867{
868 struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
869 struct mmc_host *mmc;
870 struct mmc_omap_host *host = NULL;
871 struct resource *res;
872 int ret = 0, irq;
873 u32 hctl, capa;
874
875 if (pdata == NULL) {
876 dev_err(&pdev->dev, "Platform Data is missing\n");
877 return -ENXIO;
878 }
879
880 if (pdata->nr_slots == 0) {
881 dev_err(&pdev->dev, "No Slots\n");
882 return -ENXIO;
883 }
884
885 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
886 irq = platform_get_irq(pdev, 0);
887 if (res == NULL || irq < 0)
888 return -ENXIO;
889
890 res = request_mem_region(res->start, res->end - res->start + 1,
891 pdev->name);
892 if (res == NULL)
893 return -EBUSY;
894
895 mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
896 if (!mmc) {
897 ret = -ENOMEM;
898 goto err;
899 }
900
901 host = mmc_priv(mmc);
902 host->mmc = mmc;
903 host->pdata = pdata;
904 host->dev = &pdev->dev;
905 host->use_dma = 1;
906 host->dev->dma_mask = &pdata->dma_mask;
907 host->dma_ch = -1;
908 host->irq = irq;
909 host->id = pdev->id;
910 host->slot_id = 0;
911 host->mapbase = res->start;
912 host->base = ioremap(host->mapbase, SZ_4K);
913
914 platform_set_drvdata(pdev, host);
915 INIT_WORK(&host->mmc_carddetect_work, mmc_omap_detect);
916
917 mmc->ops = &mmc_omap_ops;
918 mmc->f_min = 400000;
919 mmc->f_max = 52000000;
920
921 sema_init(&host->sem, 1);
922
923 host->iclk = clk_get(&pdev->dev, "mmchs_ick");
924 if (IS_ERR(host->iclk)) {
925 ret = PTR_ERR(host->iclk);
926 host->iclk = NULL;
927 goto err1;
928 }
929 host->fclk = clk_get(&pdev->dev, "mmchs_fck");
930 if (IS_ERR(host->fclk)) {
931 ret = PTR_ERR(host->fclk);
932 host->fclk = NULL;
933 clk_put(host->iclk);
934 goto err1;
935 }
936
937 if (clk_enable(host->fclk) != 0) {
938 clk_put(host->iclk);
939 clk_put(host->fclk);
940 goto err1;
941 }
942
943 if (clk_enable(host->iclk) != 0) {
944 clk_disable(host->fclk);
945 clk_put(host->iclk);
946 clk_put(host->fclk);
947 goto err1;
948 }
949
950 host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
951 /*
952 * MMC can still work without debounce clock.
953 */
954 if (IS_ERR(host->dbclk))
955 dev_warn(mmc_dev(host->mmc), "Failed to get debounce clock\n");
956 else
957 if (clk_enable(host->dbclk) != 0)
958 dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
959 " clk failed\n");
960 else
961 host->dbclk_enabled = 1;
962
963#ifdef CONFIG_MMC_BLOCK_BOUNCE
964 mmc->max_phys_segs = 1;
965 mmc->max_hw_segs = 1;
966#endif
967 mmc->max_blk_size = 512; /* Block Length at max can be 1024 */
968 mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */
969 mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
970 mmc->max_seg_size = mmc->max_req_size;
971
972 mmc->ocr_avail = mmc_slot(host).ocr_mask;
973 mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
974
975 if (pdata->slots[host->slot_id].wires >= 4)
976 mmc->caps |= MMC_CAP_4_BIT_DATA;
977
978 /* Only MMC1 supports 3.0V */
979 if (host->id == OMAP_MMC1_DEVID) {
980 hctl = SDVS30;
981 capa = VS30 | VS18;
982 } else {
983 hctl = SDVS18;
984 capa = VS18;
985 }
986
987 OMAP_HSMMC_WRITE(host->base, HCTL,
988 OMAP_HSMMC_READ(host->base, HCTL) | hctl);
989
990 OMAP_HSMMC_WRITE(host->base, CAPA,
991 OMAP_HSMMC_READ(host->base, CAPA) | capa);
992
993 /* Set the controller to AUTO IDLE mode */
994 OMAP_HSMMC_WRITE(host->base, SYSCONFIG,
995 OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE);
996
997 /* Set SD bus power bit */
998 OMAP_HSMMC_WRITE(host->base, HCTL,
999 OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
1000
1001 /* Request IRQ for MMC operations */
1002 ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED,
1003 mmc_hostname(mmc), host);
1004 if (ret) {
1005 dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
1006 goto err_irq;
1007 }
1008
1009 if (pdata->init != NULL) {
1010 if (pdata->init(&pdev->dev) != 0) {
1011 dev_dbg(mmc_dev(host->mmc),
1012 "Unable to configure MMC IRQs\n");
1013 goto err_irq_cd_init;
1014 }
1015 }
1016
1017 /* Request IRQ for card detect */
1018 if ((mmc_slot(host).card_detect_irq) && (mmc_slot(host).card_detect)) {
1019 ret = request_irq(mmc_slot(host).card_detect_irq,
1020 omap_mmc_cd_handler,
1021 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
1022 | IRQF_DISABLED,
1023 mmc_hostname(mmc), host);
1024 if (ret) {
1025 dev_dbg(mmc_dev(host->mmc),
1026 "Unable to grab MMC CD IRQ\n");
1027 goto err_irq_cd;
1028 }
1029 }
1030
1031 OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
1032 OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
1033
1034 mmc_add_host(mmc);
1035
1036 if (host->pdata->slots[host->slot_id].name != NULL) {
1037 ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name);
1038 if (ret < 0)
1039 goto err_slot_name;
1040 }
1041 if (mmc_slot(host).card_detect_irq && mmc_slot(host).card_detect &&
1042 host->pdata->slots[host->slot_id].get_cover_state) {
1043 ret = device_create_file(&mmc->class_dev,
1044 &dev_attr_cover_switch);
1045 if (ret < 0)
1046 goto err_cover_switch;
1047 }
1048
1049 return 0;
1050
1051err_cover_switch:
1052 device_remove_file(&mmc->class_dev, &dev_attr_cover_switch);
1053err_slot_name:
1054 mmc_remove_host(mmc);
1055err_irq_cd:
1056 free_irq(mmc_slot(host).card_detect_irq, host);
1057err_irq_cd_init:
1058 free_irq(host->irq, host);
1059err_irq:
1060 clk_disable(host->fclk);
1061 clk_disable(host->iclk);
1062 clk_put(host->fclk);
1063 clk_put(host->iclk);
1064 if (host->dbclk_enabled) {
1065 clk_disable(host->dbclk);
1066 clk_put(host->dbclk);
1067 }
1068
1069err1:
1070 iounmap(host->base);
1071err:
1072 dev_dbg(mmc_dev(host->mmc), "Probe Failed\n");
1073 release_mem_region(res->start, res->end - res->start + 1);
1074 if (host)
1075 mmc_free_host(mmc);
1076 return ret;
1077}
1078
1079static int omap_mmc_remove(struct platform_device *pdev)
1080{
1081 struct mmc_omap_host *host = platform_get_drvdata(pdev);
1082 struct resource *res;
1083
1084 if (host) {
1085 mmc_remove_host(host->mmc);
1086 if (host->pdata->cleanup)
1087 host->pdata->cleanup(&pdev->dev);
1088 free_irq(host->irq, host);
1089 if (mmc_slot(host).card_detect_irq)
1090 free_irq(mmc_slot(host).card_detect_irq, host);
1091 flush_scheduled_work();
1092
1093 clk_disable(host->fclk);
1094 clk_disable(host->iclk);
1095 clk_put(host->fclk);
1096 clk_put(host->iclk);
1097 if (host->dbclk_enabled) {
1098 clk_disable(host->dbclk);
1099 clk_put(host->dbclk);
1100 }
1101
1102 mmc_free_host(host->mmc);
1103 iounmap(host->base);
1104 }
1105
1106 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1107 if (res)
1108 release_mem_region(res->start, res->end - res->start + 1);
1109 platform_set_drvdata(pdev, NULL);
1110
1111 return 0;
1112}
1113
1114#ifdef CONFIG_PM
1115static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
1116{
1117 int ret = 0;
1118 struct mmc_omap_host *host = platform_get_drvdata(pdev);
1119
1120 if (host && host->suspended)
1121 return 0;
1122
1123 if (host) {
1124 ret = mmc_suspend_host(host->mmc, state);
1125 if (ret == 0) {
1126 host->suspended = 1;
1127
1128 OMAP_HSMMC_WRITE(host->base, ISE, 0);
1129 OMAP_HSMMC_WRITE(host->base, IE, 0);
1130
1131 if (host->pdata->suspend) {
1132 ret = host->pdata->suspend(&pdev->dev,
1133 host->slot_id);
1134 if (ret)
1135 dev_dbg(mmc_dev(host->mmc),
1136 "Unable to handle MMC board"
1137 " level suspend\n");
1138 }
1139
1140 if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
1141 OMAP_HSMMC_WRITE(host->base, HCTL,
1142 OMAP_HSMMC_READ(host->base, HCTL)
1143 & SDVSCLR);
1144 OMAP_HSMMC_WRITE(host->base, HCTL,
1145 OMAP_HSMMC_READ(host->base, HCTL)
1146 | SDVS30);
1147 OMAP_HSMMC_WRITE(host->base, HCTL,
1148 OMAP_HSMMC_READ(host->base, HCTL)
1149 | SDBP);
1150 }
1151
1152 clk_disable(host->fclk);
1153 clk_disable(host->iclk);
1154 clk_disable(host->dbclk);
1155 }
1156
1157 }
1158 return ret;
1159}
1160
1161/* Routine to resume the MMC device */
1162static int omap_mmc_resume(struct platform_device *pdev)
1163{
1164 int ret = 0;
1165 struct mmc_omap_host *host = platform_get_drvdata(pdev);
1166
1167 if (host && !host->suspended)
1168 return 0;
1169
1170 if (host) {
1171
1172 ret = clk_enable(host->fclk);
1173 if (ret)
1174 goto clk_en_err;
1175
1176 ret = clk_enable(host->iclk);
1177 if (ret) {
1178 clk_disable(host->fclk);
1179 clk_put(host->fclk);
1180 goto clk_en_err;
1181 }
1182
1183 if (clk_enable(host->dbclk) != 0)
1184 dev_dbg(mmc_dev(host->mmc),
1185 "Enabling debounce clk failed\n");
1186
1187 if (host->pdata->resume) {
1188 ret = host->pdata->resume(&pdev->dev, host->slot_id);
1189 if (ret)
1190 dev_dbg(mmc_dev(host->mmc),
1191 "Unmask interrupt failed\n");
1192 }
1193
1194 /* Notify the core to resume the host */
1195 ret = mmc_resume_host(host->mmc);
1196 if (ret == 0)
1197 host->suspended = 0;
1198 }
1199
1200 return ret;
1201
1202clk_en_err:
1203 dev_dbg(mmc_dev(host->mmc),
1204 "Failed to enable MMC clocks during resume\n");
1205 return ret;
1206}
1207
1208#else
1209#define omap_mmc_suspend NULL
1210#define omap_mmc_resume NULL
1211#endif
1212
1213static struct platform_driver omap_mmc_driver = {
1214 .probe = omap_mmc_probe,
1215 .remove = omap_mmc_remove,
1216 .suspend = omap_mmc_suspend,
1217 .resume = omap_mmc_resume,
1218 .driver = {
1219 .name = DRIVER_NAME,
1220 .owner = THIS_MODULE,
1221 },
1222};
1223
1224static int __init omap_mmc_init(void)
1225{
1226 /* Register the MMC driver */
1227 return platform_driver_register(&omap_mmc_driver);
1228}
1229
1230static void __exit omap_mmc_cleanup(void)
1231{
1232 /* Unregister MMC driver */
1233 platform_driver_unregister(&omap_mmc_driver);
1234}
1235
1236module_init(omap_mmc_init);
1237module_exit(omap_mmc_cleanup);
1238
1239MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver");
1240MODULE_LICENSE("GPL");
1241MODULE_ALIAS("platform:" DRIVER_NAME);
1242MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index fcc98a4cce3c..35a98eec7414 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -20,7 +20,7 @@
20#include <linux/irq.h> 20#include <linux/irq.h>
21#include <linux/io.h> 21#include <linux/io.h>
22 22
23#include <asm/dma.h> 23#include <mach/dma.h>
24 24
25#include <mach/regs-sdi.h> 25#include <mach/regs-sdi.h>
26#include <mach/regs-gpio.h> 26#include <mach/regs-gpio.h>
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 96ecc1766fa8..77a4f1446156 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -629,7 +629,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
629 } 629 }
630 630
631 if (c->gpio_irq) { 631 if (c->gpio_irq) {
632 if ((r = omap_request_gpio(c->gpio_irq)) < 0) { 632 if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) {
633 dev_err(&pdev->dev, "Failed to request GPIO%d for " 633 dev_err(&pdev->dev, "Failed to request GPIO%d for "
634 "OneNAND\n", c->gpio_irq); 634 "OneNAND\n", c->gpio_irq);
635 goto err_iounmap; 635 goto err_iounmap;
@@ -726,7 +726,7 @@ err_release_dma:
726 free_irq(gpio_to_irq(c->gpio_irq), c); 726 free_irq(gpio_to_irq(c->gpio_irq), c);
727err_release_gpio: 727err_release_gpio:
728 if (c->gpio_irq) 728 if (c->gpio_irq)
729 omap_free_gpio(c->gpio_irq); 729 gpio_free(c->gpio_irq);
730err_iounmap: 730err_iounmap:
731 iounmap(c->onenand.base); 731 iounmap(c->onenand.base);
732err_release_mem_region: 732err_release_mem_region:
@@ -761,7 +761,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
761 platform_set_drvdata(pdev, NULL); 761 platform_set_drvdata(pdev, NULL);
762 if (c->gpio_irq) { 762 if (c->gpio_irq) {
763 free_irq(gpio_to_irq(c->gpio_irq), c); 763 free_irq(gpio_to_irq(c->gpio_irq), c);
764 omap_free_gpio(c->gpio_irq); 764 gpio_free(c->gpio_irq);
765 } 765 }
766 iounmap(c->onenand.base); 766 iounmap(c->onenand.base);
767 release_mem_region(c->phys_base, ONENAND_IO_SIZE); 767 release_mem_region(c->phys_base, ONENAND_IO_SIZE);
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 0c628a9e5339..c2d012fcc29b 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -208,9 +208,9 @@ am79c961_init_for_open(struct net_device *dev)
208 /* 208 /*
209 * Stop the chip. 209 * Stop the chip.
210 */ 210 */
211 spin_lock_irqsave(priv->chip_lock, flags); 211 spin_lock_irqsave(&priv->chip_lock, flags);
212 write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP); 212 write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP);
213 spin_unlock_irqrestore(priv->chip_lock, flags); 213 spin_unlock_irqrestore(&priv->chip_lock, flags);
214 214
215 write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */ 215 write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */
216 write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */ 216 write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */
@@ -332,10 +332,10 @@ am79c961_close(struct net_device *dev)
332 netif_stop_queue(dev); 332 netif_stop_queue(dev);
333 netif_carrier_off(dev); 333 netif_carrier_off(dev);
334 334
335 spin_lock_irqsave(priv->chip_lock, flags); 335 spin_lock_irqsave(&priv->chip_lock, flags);
336 write_rreg (dev->base_addr, CSR0, CSR0_STOP); 336 write_rreg (dev->base_addr, CSR0, CSR0_STOP);
337 write_rreg (dev->base_addr, CSR3, CSR3_MASKALL); 337 write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
338 spin_unlock_irqrestore(priv->chip_lock, flags); 338 spin_unlock_irqrestore(&priv->chip_lock, flags);
339 339
340 free_irq (dev->irq, dev); 340 free_irq (dev->irq, dev);
341 341
@@ -391,7 +391,7 @@ static void am79c961_setmulticastlist (struct net_device *dev)
391 am79c961_mc_hash(dmi, multi_hash); 391 am79c961_mc_hash(dmi, multi_hash);
392 } 392 }
393 393
394 spin_lock_irqsave(priv->chip_lock, flags); 394 spin_lock_irqsave(&priv->chip_lock, flags);
395 395
396 stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP; 396 stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
397 397
@@ -405,9 +405,9 @@ static void am79c961_setmulticastlist (struct net_device *dev)
405 * Spin waiting for chip to report suspend mode 405 * Spin waiting for chip to report suspend mode
406 */ 406 */
407 while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) { 407 while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) {
408 spin_unlock_irqrestore(priv->chip_lock, flags); 408 spin_unlock_irqrestore(&priv->chip_lock, flags);
409 nop(); 409 nop();
410 spin_lock_irqsave(priv->chip_lock, flags); 410 spin_lock_irqsave(&priv->chip_lock, flags);
411 } 411 }
412 } 412 }
413 413
@@ -429,7 +429,7 @@ static void am79c961_setmulticastlist (struct net_device *dev)
429 write_rreg(dev->base_addr, CTRL1, 0); 429 write_rreg(dev->base_addr, CTRL1, 0);
430 } 430 }
431 431
432 spin_unlock_irqrestore(priv->chip_lock, flags); 432 spin_unlock_irqrestore(&priv->chip_lock, flags);
433} 433}
434 434
435static void am79c961_timeout(struct net_device *dev) 435static void am79c961_timeout(struct net_device *dev)
@@ -467,10 +467,10 @@ am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev)
467 am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP); 467 am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP);
468 priv->txhead = head; 468 priv->txhead = head;
469 469
470 spin_lock_irqsave(priv->chip_lock, flags); 470 spin_lock_irqsave(&priv->chip_lock, flags);
471 write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA); 471 write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA);
472 dev->trans_start = jiffies; 472 dev->trans_start = jiffies;
473 spin_unlock_irqrestore(priv->chip_lock, flags); 473 spin_unlock_irqrestore(&priv->chip_lock, flags);
474 474
475 /* 475 /*
476 * If the next packet is owned by the ethernet device, 476 * If the next packet is owned by the ethernet device,
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 4bbddb73abd9..f3aaba35e912 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -315,14 +315,14 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver,
315 return -ENODEV; 315 return -ENODEV;
316 } 316 }
317 317
318 usb_host_ck = clk_get(0, "usb_hhc_ck"); 318 usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck");
319 if (IS_ERR(usb_host_ck)) 319 if (IS_ERR(usb_host_ck))
320 return PTR_ERR(usb_host_ck); 320 return PTR_ERR(usb_host_ck);
321 321
322 if (!cpu_is_omap15xx()) 322 if (!cpu_is_omap15xx())
323 usb_dc_ck = clk_get(0, "usb_dc_ck"); 323 usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck");
324 else 324 else
325 usb_dc_ck = clk_get(0, "lb_ck"); 325 usb_dc_ck = clk_get(&pdev->dev, "lb_ck");
326 326
327 if (IS_ERR(usb_dc_ck)) { 327 if (IS_ERR(usb_dc_ck)) {
328 clk_put(usb_host_ck); 328 clk_put(usb_host_ck);
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index 6e2ea7518761..ab3949256677 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -800,14 +800,14 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
800 /* FIXME: 800 /* FIXME:
801 * According to errata some platforms have a clock rate limitiation 801 * According to errata some platforms have a clock rate limitiation
802 */ 802 */
803 lcdc.lcd_ck = clk_get(NULL, "lcd_ck"); 803 lcdc.lcd_ck = clk_get(fbdev->dev, "lcd_ck");
804 if (IS_ERR(lcdc.lcd_ck)) { 804 if (IS_ERR(lcdc.lcd_ck)) {
805 dev_err(fbdev->dev, "unable to access LCD clock\n"); 805 dev_err(fbdev->dev, "unable to access LCD clock\n");
806 r = PTR_ERR(lcdc.lcd_ck); 806 r = PTR_ERR(lcdc.lcd_ck);
807 goto fail0; 807 goto fail0;
808 } 808 }
809 809
810 tc_ck = clk_get(NULL, "tc_ck"); 810 tc_ck = clk_get(fbdev->dev, "tc_ck");
811 if (IS_ERR(tc_ck)) { 811 if (IS_ERR(tc_ck)) {
812 dev_err(fbdev->dev, "unable to access TC clock\n"); 812 dev_err(fbdev->dev, "unable to access TC clock\n");
813 r = PTR_ERR(tc_ck); 813 r = PTR_ERR(tc_ck);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 3efa12f9ee50..09a3d5522b43 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -187,10 +187,10 @@ config EP93XX_WATCHDOG
187 187
188config OMAP_WATCHDOG 188config OMAP_WATCHDOG
189 tristate "OMAP Watchdog" 189 tristate "OMAP Watchdog"
190 depends on ARCH_OMAP16XX || ARCH_OMAP24XX 190 depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
191 help 191 help
192 Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog. Say 'Y' here to 192 Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog. Say 'Y'
193 enable the OMAP1610/OMAP1710 watchdog timer. 193 here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
194 194
195config PNX4008_WATCHDOG 195config PNX4008_WATCHDOG
196 tristate "PNX4008 Watchdog" 196 tristate "PNX4008 Watchdog"
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 993e5f52afef..5531691f46ea 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -13,6 +13,7 @@
13#include <linux/errno.h> 13#include <linux/errno.h>
14#include <linux/fs.h> 14#include <linux/fs.h>
15#include <linux/init.h> 15#include <linux/init.h>
16#include <linux/io.h>
16#include <linux/kernel.h> 17#include <linux/kernel.h>
17#include <linux/miscdevice.h> 18#include <linux/miscdevice.h>
18#include <linux/module.h> 19#include <linux/module.h>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-30 11:19:38 -0500