2 files changed, 5 insertions, 56 deletions

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 65ea7d25f691..1b34fc56067e 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -222,37 +222,6 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res)
 }
 
 /**
- * pci_restore_bars - restore a devices BAR values (e.g. after wake-up)
- * @dev: PCI device to have its BARs restored
- *
- * Restore the BAR values for a given device, so as to make it
- * accessible by its driver.
- */
-void
-pci_restore_bars(struct pci_dev *dev)
-{
-        int i, numres;
-
-        switch (dev->hdr_type) {
-        case PCI_HEADER_TYPE_NORMAL:
-                numres = 6;
-                break;
-        case PCI_HEADER_TYPE_BRIDGE:
-                numres = 2;
-                break;
-        case PCI_HEADER_TYPE_CARDBUS:
-                numres = 1;
-                break;
-        default:
-                /* Should never get here, but just in case... */
-                return;
-        }
-
-        for (i = 0; i < numres; i ++)
-                pci_update_resource(dev, &dev->resource[i], i);
-}
-
-/**
  * pci_set_power_state - Set the power state of a PCI device
  * @dev: PCI device to be suspended
  * @state: PCI power state (D0, D1, D2, D3hot, D3cold) we're entering
@@ -270,7 +239,7 @@ int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t);
 int
 pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 {
-        int pm, need_restore = 0;
+        int pm;
         u16 pmcsr, pmc;
 
         /* bound the state we're entering */
@@ -309,17 +278,14 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
                         return -EIO;
         }
 
-        pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
-
         /* If we're in D3, force entire word to 0.
          * This doesn't affect PME_Status, disables PME_En, and
          * sets PowerState to 0.
          */
-        if (dev->current_state >= PCI_D3hot) {
-                if (!(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
-                        need_restore = 1;
+        if (dev->current_state >= PCI_D3hot)
                 pmcsr = 0;
-        } else {
+        else {
+                pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
                 pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
                 pmcsr |= state;
         }
@@ -342,22 +308,6 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
                 platform_pci_set_power_state(dev, state);
 
         dev->current_state = state;
-
-        /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
-         * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
-         * from D3hot to D0 _may_ perform an internal reset, thereby
-         * going to "D0 Uninitialized" rather than "D0 Initialized".
-         * For example, at least some versions of the 3c905B and the
-         * 3c556B exhibit this behaviour.
-         *
-         * At least some laptop BIOSen (e.g. the Thinkpad T21) leave
-         * devices in a D3hot state at boot.  Consequently, we need to
-         * restore at least the BARs so that the device will be
-         * accessible to its driver.
-         */
-        if (need_restore)
-                pci_restore_bars(dev);
-
         return 0;
 }
 
@@ -855,7 +805,6 @@ struct pci_dev *isa_bridge;
 EXPORT_SYMBOL(isa_bridge);
 #endif
 
-EXPORT_SYMBOL_GPL(pci_restore_bars);
 EXPORT_SYMBOL(pci_enable_device_bars);
 EXPORT_SYMBOL(pci_enable_device);
 EXPORT_SYMBOL(pci_disable_device);
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 589486704ce3..84eedc965688 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -26,7 +26,7 @@
 #include "pci.h"
 
 
-void
+static void
 pci_update_resource(struct pci_dev *dev, struct resource *res, int resno)
 {
         struct pci_bus_region region;