278 files changed, 9430 insertions, 1891 deletions

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index f4f632917509..b0243fd55ac0 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -312,9 +312,13 @@ config ACPI_DEBUG
         bool "Debug Statements"
         default n
         help
-          The ACPI driver can optionally report errors with a great deal
-          of verbosity. Saying Y enables these statements. This will increase
-          your kernel size by around 50K.
+          The ACPI subsystem can produce debug output.  Saying Y enables this
+          output and increases the kernel size by around 50K.
+
+          Use the acpi.debug_layer and acpi.debug_level kernel command-line
+          parameters documented in Documentation/acpi/debug.txt and
+          Documentation/kernel-parameters.txt to control the type and
+          amount of debug output.
 
 config ACPI_DEBUG_FUNC_TRACE
         bool "Additionally enable ACPI function tracing"
@@ -324,14 +328,6 @@ config ACPI_DEBUG_FUNC_TRACE
           ACPI Debug Statements slow down ACPI processing. Function trace
           is about half of the penalty and is rarely useful.
 
-config ACPI_EC
-        bool
-        default y
-        help
-          This driver is required on some systems for the proper operation of
-          the battery and thermal drivers.  If you are compiling for a 
-          mobile system, say Y.
-
 config ACPI_PCI_SLOT
         tristate "PCI slot detection driver"
         default n
@@ -341,10 +337,6 @@ config ACPI_PCI_SLOT
           help you correlate PCI bus addresses with the physical geography
           of your slots. If you are unsure, say N.
 
-config ACPI_POWER
-        bool
-        default y
-
 config ACPI_SYSTEM
         bool
         default y
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index d91c027ece8f..3c0c93300f12 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -39,19 +39,23 @@ obj-y				+= sleep/
 obj-y                           += bus.o glue.o
 obj-y                           += scan.o
 # Keep EC driver first. Initialization of others depend on it.
-obj-$(CONFIG_ACPI_EC)           += ec.o
+obj-y                           += ec.o
 obj-$(CONFIG_ACPI_AC)           += ac.o
 obj-$(CONFIG_ACPI_BATTERY)      += battery.o
 obj-$(CONFIG_ACPI_BUTTON)       += button.o
 obj-$(CONFIG_ACPI_FAN)          += fan.o
 obj-$(CONFIG_ACPI_DOCK)         += dock.o
 obj-$(CONFIG_ACPI_VIDEO)        += video.o
+ifdef CONFIG_ACPI_VIDEO
+obj-y                           += video_detect.o
+endif
+
 obj-y                           += pci_root.o pci_link.o pci_irq.o pci_bind.o
 obj-$(CONFIG_ACPI_PCI_SLOT)     += pci_slot.o
 obj-$(CONFIG_ACPI_PROCESSOR)    += processor.o
 obj-$(CONFIG_ACPI_CONTAINER)    += container.o
 obj-$(CONFIG_ACPI_THERMAL)      += thermal.o
-obj-$(CONFIG_ACPI_POWER)        += power.o
+obj-y                           += power.o
 obj-$(CONFIG_ACPI_SYSTEM)       += system.o event.o
 obj-$(CONFIG_ACPI_DEBUG)        += debug.o
 obj-$(CONFIG_ACPI_NUMA)         += numa.o
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index d72a1b6c8a94..9b917dac7732 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -37,7 +37,6 @@
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
-#define ACPI_AC_COMPONENT               0x00020000
 #define ACPI_AC_CLASS                   "ac_adapter"
 #define ACPI_AC_DEVICE_NAME             "AC Adapter"
 #define ACPI_AC_FILE_STATE              "state"
@@ -242,7 +241,7 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data)
                 acpi_ac_get_state(ac);
                 acpi_bus_generate_proc_event(device, event, (u32) ac->state);
                 acpi_bus_generate_netlink_event(device->pnp.device_class,
-                                                  device->dev.bus_id, event,
+                                                  dev_name(&device->dev), event,
                                                   (u32) ac->state);
 #ifdef CONFIG_ACPI_SYSFS_POWER
                 kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 71d21c51c45f..63a17b55b39b 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -32,7 +32,6 @@
 #include <linux/memory_hotplug.h>
 #include <acpi/acpi_drivers.h>
 
-#define ACPI_MEMORY_DEVICE_COMPONENT            0x08000000UL
 #define ACPI_MEMORY_DEVICE_CLASS                "memory"
 #define ACPI_MEMORY_DEVICE_HID                  "PNP0C80"
 #define ACPI_MEMORY_DEVICE_NAME                 "Hotplug Mem Device"
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index b2133e89ad9a..1423b0c0cd2e 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -46,7 +46,6 @@
 
 #define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF
 
-#define ACPI_BATTERY_COMPONENT          0x00040000
 #define ACPI_BATTERY_CLASS              "battery"
 #define ACPI_BATTERY_DEVICE_NAME        "Battery"
 #define ACPI_BATTERY_NOTIFY_STATUS      0x80
@@ -782,7 +781,7 @@ static void acpi_battery_notify(acpi_handle handle, u32 event, void *data)
         acpi_bus_generate_proc_event(device, event,
                                      acpi_battery_present(battery));
         acpi_bus_generate_netlink_event(device->pnp.device_class,
-                                        device->dev.bus_id, event,
+                                        dev_name(&device->dev), event,
                                         acpi_battery_present(battery));
 #ifdef CONFIG_ACPI_SYSFS_POWER
         /* acpi_batter_update could remove power_supply object */
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index c797c6473f31..7edf6d913c13 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -688,6 +688,14 @@ void __init acpi_early_init(void)
         if (acpi_disabled)
                 return;
 
+        /*
+         * ACPI CA initializes acpi_dbg_level to non-zero, which means
+         * we get debug output merely by turning on CONFIG_ACPI_DEBUG.
+         * Turn it off so we don't get output unless the user specifies
+         * acpi.debug_level.
+         */
+        acpi_dbg_level = 0;
+
         printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION);
 
         /* enable workarounds, unless strict ACPI spec. compliance */
@@ -774,7 +782,7 @@ static int __init acpi_bus_init(void)
                        "Unable to initialize ACPI OS objects\n");
                 goto error1;
         }
-#ifdef CONFIG_ACPI_EC
+
         /*
          * ACPI 2.0 requires the EC driver to be loaded and work before
          * the EC device is found in the namespace (i.e. before acpi_initialize_objects()
@@ -785,7 +793,6 @@ static int __init acpi_bus_init(void)
          */
         status = acpi_ec_ecdt_probe();
         /* Ignore result. Not having an ECDT is not fatal. */
-#endif
 
         status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION);
         if (ACPI_FAILURE(status)) {
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index cb046c3fc3f2..171fd914f435 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -33,7 +33,6 @@
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
-#define ACPI_BUTTON_COMPONENT           0x00080000
 #define ACPI_BUTTON_CLASS               "button"
 #define ACPI_BUTTON_FILE_INFO           "info"
 #define ACPI_BUTTON_FILE_STATE          "state"
@@ -479,7 +478,7 @@ static int acpi_button_add(struct acpi_device *device)
                                   device->wakeup.gpe_number,
                                   ACPI_GPE_TYPE_WAKE_RUN);
                 acpi_enable_gpe(device->wakeup.gpe_device,
-                                device->wakeup.gpe_number, ACPI_NOT_ISR);
+                                device->wakeup.gpe_number);
                 device->wakeup.state.enabled = 1;
         }
 
diff --git a/drivers/acpi/cm_sbs.c b/drivers/acpi/cm_sbs.c
index 4441e84b28a9..307963bd1043 100644
--- a/drivers/acpi/cm_sbs.c
+++ b/drivers/acpi/cm_sbs.c
@@ -34,7 +34,6 @@
 ACPI_MODULE_NAME("cm_sbs");
 #define ACPI_AC_CLASS           "ac_adapter"
 #define ACPI_BATTERY_CLASS      "battery"
-#define ACPI_SBS_COMPONENT      0x00080000
 #define _COMPONENT              ACPI_SBS_COMPONENT
 static struct proc_dir_entry *acpi_ac_dir;
 static struct proc_dir_entry *acpi_battery_dir;
@@ -105,9 +104,3 @@ void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir_param)
         return;
 }
 EXPORT_SYMBOL(acpi_unlock_battery_dir);
-
-static int __init acpi_cm_sbs_init(void)
-{
-        return 0;
-}
-subsys_initcall(acpi_cm_sbs_init);
diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c
index 134818b265a9..17020c12623c 100644
--- a/drivers/acpi/container.c
+++ b/drivers/acpi/container.c
@@ -41,7 +41,6 @@
 #define INSTALL_NOTIFY_HANDLER          1
 #define UNINSTALL_NOTIFY_HANDLER        2
 
-#define ACPI_CONTAINER_COMPONENT        0x01000000
 #define _COMPONENT                      ACPI_CONTAINER_COMPONENT
 ACPI_MODULE_NAME("container");
 
diff --git a/drivers/acpi/debug.c b/drivers/acpi/debug.c
index abf36b4b1d1d..c48396892008 100644
--- a/drivers/acpi/debug.c
+++ b/drivers/acpi/debug.c
@@ -44,6 +44,21 @@ static const struct acpi_dlayer acpi_debug_layers[] = {
         ACPI_DEBUG_INIT(ACPI_CA_DISASSEMBLER),
         ACPI_DEBUG_INIT(ACPI_COMPILER),
         ACPI_DEBUG_INIT(ACPI_TOOLS),
+
+        ACPI_DEBUG_INIT(ACPI_BUS_COMPONENT),
+        ACPI_DEBUG_INIT(ACPI_AC_COMPONENT),
+        ACPI_DEBUG_INIT(ACPI_BATTERY_COMPONENT),
+        ACPI_DEBUG_INIT(ACPI_BUTTON_COMPONENT),
+        ACPI_DEBUG_INIT(ACPI_SBS_COMPONENT),
+        ACPI_DEBUG_INIT(ACPI_FAN_COMPONENT),
+        ACPI_DEBUG_INIT(ACPI_PCI_COMPONENT),
+        ACPI_DEBUG_INIT(ACPI_POWER_COMPONENT),
+        ACPI_DEBUG_INIT(ACPI_CONTAINER_COMPONENT),
+        ACPI_DEBUG_INIT(ACPI_SYSTEM_COMPONENT),
+        ACPI_DEBUG_INIT(ACPI_THERMAL_COMPONENT),
+        ACPI_DEBUG_INIT(ACPI_MEMORY_DEVICE_COMPONENT),
+        ACPI_DEBUG_INIT(ACPI_VIDEO_COMPONENT),
+        ACPI_DEBUG_INIT(ACPI_PROCESSOR_COMPONENT),
 };
 
 static const struct acpi_dlevel acpi_debug_levels[] = {
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index ef42316f89f5..cf41f9fc24a7 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -70,7 +70,7 @@ enum ec_command {
 #define ACPI_EC_UDELAY_GLK      1000    /* Wait 1ms max. to get global lock */
 #define ACPI_EC_UDELAY          100     /* Wait 100us before polling EC again */
 
-#define ACPI_EC_STORM_THRESHOLD 20      /* number of false interrupts
+#define ACPI_EC_STORM_THRESHOLD 8       /* number of false interrupts
                                            per one transaction */
 
 enum {
@@ -100,8 +100,11 @@ struct transaction {
         u8 *rdata;
         unsigned short irq_count;
         u8 command;
+        u8 wi;
+        u8 ri;
         u8 wlen;
         u8 rlen;
+        bool done;
 };
 
 static struct acpi_ec {
@@ -178,34 +181,45 @@ static int ec_transaction_done(struct acpi_ec *ec)
         unsigned long flags;
         int ret = 0;
         spin_lock_irqsave(&ec->curr_lock, flags);
-        if (!ec->curr || (!ec->curr->wlen && !ec->curr->rlen))
+        if (!ec->curr || ec->curr->done)
                 ret = 1;
         spin_unlock_irqrestore(&ec->curr_lock, flags);
         return ret;
 }
 
+static void start_transaction(struct acpi_ec *ec)
+{
+        ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0;
+        ec->curr->done = false;
+        acpi_ec_write_cmd(ec, ec->curr->command);
+}
+
 static void gpe_transaction(struct acpi_ec *ec, u8 status)
 {
         unsigned long flags;
         spin_lock_irqsave(&ec->curr_lock, flags);
         if (!ec->curr)
                 goto unlock;
-        if (ec->curr->wlen > 0) {
-                if ((status & ACPI_EC_FLAG_IBF) == 0) {
-                        acpi_ec_write_data(ec, *(ec->curr->wdata++));
-                        --ec->curr->wlen;
-                } else
-                        /* false interrupt, state didn't change */
-                        ++ec->curr->irq_count;
-
-        } else if (ec->curr->rlen > 0) {
+        if (ec->curr->wlen > ec->curr->wi) {
+                if ((status & ACPI_EC_FLAG_IBF) == 0)
+                        acpi_ec_write_data(ec,
+                                ec->curr->wdata[ec->curr->wi++]);
+                else
+                        goto err;
+        } else if (ec->curr->rlen > ec->curr->ri) {
                 if ((status & ACPI_EC_FLAG_OBF) == 1) {
-                        *(ec->curr->rdata++) = acpi_ec_read_data(ec);
-                        --ec->curr->rlen;
+                        ec->curr->rdata[ec->curr->ri++] = acpi_ec_read_data(ec);
+                        if (ec->curr->rlen == ec->curr->ri)
+                                ec->curr->done = true;
                 } else
-                        /* false interrupt, state didn't change */
-                        ++ec->curr->irq_count;
-        }
+                        goto err;
+        } else if (ec->curr->wlen == ec->curr->wi &&
+                   (status & ACPI_EC_FLAG_IBF) == 0)
+                ec->curr->done = true;
+        goto unlock;
+err:
+        /* false interrupt, state didn't change */
+        ++ec->curr->irq_count;
 unlock:
         spin_unlock_irqrestore(&ec->curr_lock, flags);
 }
@@ -215,6 +229,15 @@ static int acpi_ec_wait(struct acpi_ec *ec)
         if (wait_event_timeout(ec->wait, ec_transaction_done(ec),
                                msecs_to_jiffies(ACPI_EC_DELAY)))
                 return 0;
+        /* try restart command if we get any false interrupts */
+        if (ec->curr->irq_count &&
+            (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) {
+                pr_debug(PREFIX "controller reset, restart transaction\n");
+                start_transaction(ec);
+                if (wait_event_timeout(ec->wait, ec_transaction_done(ec),
+                                        msecs_to_jiffies(ACPI_EC_DELAY)))
+                        return 0;
+        }
         /* missing GPEs, switch back to poll mode */
         if (printk_ratelimit())
                 pr_info(PREFIX "missing confirmations, "
@@ -239,10 +262,10 @@ static int ec_check_sci(struct acpi_ec *ec, u8 state)
 static int ec_poll(struct acpi_ec *ec)
 {
         unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
-        msleep(1);
+        udelay(ACPI_EC_UDELAY);
         while (time_before(jiffies, delay)) {
                 gpe_transaction(ec, acpi_ec_read_status(ec));
-                msleep(1);
+                udelay(ACPI_EC_UDELAY);
                 if (ec_transaction_done(ec))
                         return 0;
         }
@@ -259,14 +282,13 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec,
         /* disable GPE during transaction if storm is detected */
         if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
                 clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
-                acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
+                acpi_disable_gpe(NULL, ec->gpe);
         }
         /* start transaction */
         spin_lock_irqsave(&ec->curr_lock, tmp);
         /* following two actions should be kept atomic */
-        t->irq_count = 0;
         ec->curr = t;
-        acpi_ec_write_cmd(ec, ec->curr->command);
+        start_transaction(ec);
         if (ec->curr->command == ACPI_EC_COMMAND_QUERY)
                 clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
         spin_unlock_irqrestore(&ec->curr_lock, tmp);
@@ -283,10 +305,11 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec,
                 /* check if we received SCI during transaction */
                 ec_check_sci(ec, acpi_ec_read_status(ec));
                 /* it is safe to enable GPE outside of transaction */
-                acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
+                acpi_enable_gpe(NULL, ec->gpe);
         } else if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags) &&
                    t->irq_count > ACPI_EC_STORM_THRESHOLD) {
-                pr_debug(PREFIX "GPE storm detected\n");
+                pr_info(PREFIX "GPE storm detected, "
+                        "transactions will use polling mode\n");
                 set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
         }
         return ret;
@@ -558,17 +581,26 @@ static u32 acpi_ec_gpe_handler(void *data)
         pr_debug(PREFIX "~~~> interrupt\n");
         status = acpi_ec_read_status(ec);
 
-        gpe_transaction(ec, status);
-        if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0)
-                wake_up(&ec->wait);
+        if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) {
+                gpe_transaction(ec, status);
+                if (ec_transaction_done(ec) &&
+                    (status & ACPI_EC_FLAG_IBF) == 0)
+                        wake_up(&ec->wait);
+        }
 
         ec_check_sci(ec, status);
         if (!test_bit(EC_FLAGS_GPE_MODE, &ec->flags) &&
             !test_bit(EC_FLAGS_NO_GPE, &ec->flags)) {
                 /* this is non-query, must be confirmation */
-                if (printk_ratelimit())
-                        pr_info(PREFIX "non-query interrupt received,"
+                if (!test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
+                        if (printk_ratelimit())
+                                pr_info(PREFIX "non-query interrupt received,"
+                                        " switching to interrupt mode\n");
+                } else {
+                        /* hush, STORM switches the mode every transaction */
+                        pr_debug(PREFIX "non-query interrupt received,"
                                 " switching to interrupt mode\n");
+                }
                 set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
         }
         return ACPI_INTERRUPT_HANDLED;
@@ -736,7 +768,7 @@ static acpi_status
 ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval)
 {
         acpi_status status;
-        unsigned long long tmp;
+        unsigned long long tmp = 0;
 
         struct acpi_ec *ec = context;
         status = acpi_walk_resources(handle, METHOD_NAME__CRS,
@@ -751,6 +783,7 @@ ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval)
                 return status;
         ec->gpe = tmp;
         /* Use the global lock for all EC transactions? */
+        tmp = 0;
         acpi_evaluate_integer(handle, "_GLK", NULL, &tmp);
         ec->global_lock = tmp;
         ec->handle = handle;
@@ -868,7 +901,7 @@ static int ec_install_handlers(struct acpi_ec *ec)
         if (ACPI_FAILURE(status))
                 return -ENODEV;
         acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
-        acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
+        acpi_enable_gpe(NULL, ec->gpe);
         status = acpi_install_address_space_handler(ec->handle,
                                                     ACPI_ADR_SPACE_EC,
                                                     &acpi_ec_space_handler,
@@ -1007,7 +1040,7 @@ static int acpi_ec_suspend(struct acpi_device *device, pm_message_t state)
         /* Stop using GPE */
         set_bit(EC_FLAGS_NO_GPE, &ec->flags);
         clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
-        acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
+        acpi_disable_gpe(NULL, ec->gpe);
         return 0;
 }
 
@@ -1016,7 +1049,7 @@ static int acpi_ec_resume(struct acpi_device *device)
         struct acpi_ec *ec = acpi_driver_data(device);
         /* Enable use of GPE back */
         clear_bit(EC_FLAGS_NO_GPE, &ec->flags);
-        acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
+        acpi_enable_gpe(NULL, ec->gpe);
         return 0;
 }
 
diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c
index c5e53aae86f7..f45c74fe745e 100644
--- a/drivers/acpi/events/evgpe.c
+++ b/drivers/acpi/events/evgpe.c
@@ -289,8 +289,6 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
          */
         status = acpi_hw_low_disable_gpe(gpe_event_info);
         return_ACPI_STATUS(status);
-
-        return_ACPI_STATUS(AE_OK);
 }
 
 /*******************************************************************************
diff --git a/drivers/acpi/events/evxfevnt.c b/drivers/acpi/events/evxfevnt.c
index 73bfd6bf962f..41554f736b68 100644
--- a/drivers/acpi/events/evxfevnt.c
+++ b/drivers/acpi/events/evxfevnt.c
@@ -248,21 +248,15 @@ ACPI_EXPORT_SYMBOL(acpi_set_gpe_type)
  * DESCRIPTION: Enable an ACPI event (general purpose)
  *
  ******************************************************************************/
-acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags)
+acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
 {
         acpi_status status = AE_OK;
+        acpi_cpu_flags flags;
         struct acpi_gpe_event_info *gpe_event_info;
 
         ACPI_FUNCTION_TRACE(acpi_enable_gpe);
 
-        /* Use semaphore lock if not executing at interrupt level */
-
-        if (flags & ACPI_NOT_ISR) {
-                status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
-                if (ACPI_FAILURE(status)) {
-                        return_ACPI_STATUS(status);
-                }
-        }
+        flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 
         /* Ensure that we have a valid GPE number */
 
@@ -277,9 +271,7 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags)
         status = acpi_ev_enable_gpe(gpe_event_info, TRUE);
 
       unlock_and_exit:
-        if (flags & ACPI_NOT_ISR) {
-                (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
-        }
+        acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
         return_ACPI_STATUS(status);
 }
 
@@ -299,22 +291,15 @@ ACPI_EXPORT_SYMBOL(acpi_enable_gpe)
  * DESCRIPTION: Disable an ACPI event (general purpose)
  *
  ******************************************************************************/
-acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags)
+acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number)
 {
         acpi_status status = AE_OK;
+        acpi_cpu_flags flags;
         struct acpi_gpe_event_info *gpe_event_info;
 
         ACPI_FUNCTION_TRACE(acpi_disable_gpe);
 
-        /* Use semaphore lock if not executing at interrupt level */
-
-        if (flags & ACPI_NOT_ISR) {
-                status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
-                if (ACPI_FAILURE(status)) {
-                        return_ACPI_STATUS(status);
-                }
-        }
-
+        flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
         /* Ensure that we have a valid GPE number */
 
         gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
@@ -325,10 +310,8 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags)
 
         status = acpi_ev_disable_gpe(gpe_event_info);
 
-      unlock_and_exit:
-        if (flags & ACPI_NOT_ISR) {
-                (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
-        }
+unlock_and_exit:
+        acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
         return_ACPI_STATUS(status);
 }
 
@@ -521,6 +504,9 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status)
         if (value)
                 *event_status |= ACPI_EVENT_FLAG_SET;
 
+        if (acpi_gbl_fixed_event_handlers[event].handler)
+                *event_status |= ACPI_EVENT_FLAG_HANDLE;
+
         return_ACPI_STATUS(status);
 }
 
@@ -571,6 +557,9 @@ acpi_get_gpe_status(acpi_handle gpe_device,
 
         status = acpi_hw_get_gpe_status(gpe_event_info, event_status);
 
+        if (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)
+                *event_status |= ACPI_EVENT_FLAG_HANDLE;
+
       unlock_and_exit:
         if (flags & ACPI_NOT_ISR) {
                 (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index 60d54d1f6b19..eaaee1660bdf 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -34,7 +34,6 @@
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
-#define ACPI_FAN_COMPONENT              0x00200000
 #define ACPI_FAN_CLASS                  "fan"
 #define ACPI_FAN_FILE_STATE             "state"
 
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 24649ada08df..adec3d15810a 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -140,6 +140,46 @@ struct device *acpi_get_physical_device(acpi_handle handle)
 
 EXPORT_SYMBOL(acpi_get_physical_device);
 
+/* ToDo: When a PCI bridge is found, return the PCI device behind the bridge
+ *       This should work in general, but did not on a Lenovo T61 for the
+ *       graphics card. But this must be fixed when the PCI device is
+ *       bound and the kernel device struct is attached to the acpi device
+ * Note: A success call will increase reference count by one
+ *       Do call put_device(dev) on the returned device then
+ */
+struct device *acpi_get_physical_pci_device(acpi_handle handle)
+{
+        struct device *dev;
+        long long device_id;
+        acpi_status status;
+
+        status =
+                acpi_evaluate_integer(handle, "_ADR", NULL, &device_id);
+
+        if (ACPI_FAILURE(status))
+                return NULL;
+
+        /* We need to attempt to determine whether the _ADR refers to a
+           PCI device or not. There's no terribly good way to do this,
+           so the best we can hope for is to assume that there'll never
+           be a device in the host bridge */
+        if (device_id >= 0x10000) {
+                /* It looks like a PCI device. Does it exist? */
+                dev = acpi_get_physical_device(handle);
+        } else {
+                /* It doesn't look like a PCI device. Does its parent
+                   exist? */
+                acpi_handle phandle;
+                if (acpi_get_parent(handle, &phandle))
+                        return NULL;
+                dev = acpi_get_physical_device(phandle);
+        }
+        if (!dev)
+                return NULL;
+        return dev;
+}
+EXPORT_SYMBOL(acpi_get_physical_pci_device);
+
 static int acpi_bind_one(struct device *dev, acpi_handle handle)
 {
         struct acpi_device *acpi_dev;
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index fcfdef7b4fdd..e52ad91ce2dc 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -531,7 +531,7 @@ int __init acpi_irq_penalty_init(void)
         return 0;
 }
 
-static int acpi_irq_balance;    /* 0: static, 1: balance */
+static int acpi_irq_balance = -1;       /* 0: static, 1: balance */
 
 static int acpi_pci_link_allocate(struct acpi_pci_link *link)
 {
@@ -950,10 +950,17 @@ device_initcall(irqrouter_init_sysfs);
 
 static int __init acpi_pci_link_init(void)
 {
-
         if (acpi_noirq)
                 return 0;
 
+        if (acpi_irq_balance == -1) {
+                /* no command line switch: enable balancing in IOAPIC mode */
+                if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC)
+                        acpi_irq_balance = 1;
+                else
+                        acpi_irq_balance = 0;
+        }
+
         acpi_link.count = 0;
         INIT_LIST_HEAD(&acpi_link.entries);
 
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 1b8f67d21d53..642554b1b60c 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -376,15 +376,9 @@ static int acpi_pci_root_remove(struct acpi_device *device, int type)
 
 static int __init acpi_pci_root_init(void)
 {
-
         if (acpi_pci_disabled)
                 return 0;
 
-        /* DEBUG:
-           acpi_dbg_layer = ACPI_PCI_COMPONENT;
-           acpi_dbg_level = 0xFFFFFFFF;
-         */
-
         if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0)
                 return -ENODEV;
 
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index a1718e56103b..bb7d50dd2818 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -44,9 +44,8 @@
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
-#define _COMPONENT              ACPI_POWER_COMPONENT
+#define _COMPONENT                      ACPI_POWER_COMPONENT
 ACPI_MODULE_NAME("power");
-#define ACPI_POWER_COMPONENT            0x00800000
 #define ACPI_POWER_CLASS                "power_resource"
 #define ACPI_POWER_DEVICE_NAME          "Power Resource"
 #define ACPI_POWER_FILE_INFO            "info"
@@ -153,7 +152,8 @@ static int acpi_power_get_state(acpi_handle handle, int *state)
                               ACPI_POWER_RESOURCE_STATE_OFF;
 
         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] is %s\n",
-                          acpi_ut_get_node_name(handle), state ? "on" : "off"));
+                          acpi_ut_get_node_name(handle),
+                                *state ? "on" : "off"));
 
         return 0;
 }
@@ -516,11 +516,6 @@ int acpi_power_transition(struct acpi_device *device, int state)
         cl = &device->power.states[device->power.state].resources;
         tl = &device->power.states[state].resources;
 
-        if (!cl->count && !tl->count) {
-                result = -ENODEV;
-                goto end;
-        }
-
         /* TBD: Resources must be ordered. */
 
         /*
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 24a362f8034c..34948362f41d 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -59,7 +59,6 @@
 #include <acpi/acpi_drivers.h>
 #include <acpi/processor.h>
 
-#define ACPI_PROCESSOR_COMPONENT        0x01000000
 #define ACPI_PROCESSOR_CLASS            "processor"
 #define ACPI_PROCESSOR_DEVICE_NAME      "Processor"
 #define ACPI_PROCESSOR_FILE_INFO        "info"
@@ -89,6 +88,7 @@ static int acpi_processor_handle_eject(struct acpi_processor *pr);
 
 
 static const struct acpi_device_id processor_device_ids[] = {
+        {ACPI_PROCESSOR_OBJECT_HID, 0},
         {ACPI_PROCESSOR_HID, 0},
         {"", 0},
 };
@@ -409,7 +409,7 @@ static int acpi_processor_remove_fs(struct acpi_device *device)
 /* Use the acpiid in MADT to map cpus in case of SMP */
 
 #ifndef CONFIG_SMP
-static int get_cpu_id(acpi_handle handle, u32 acpi_id) {return -1;}
+static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { return -1; }
 #else
 
 static struct acpi_table_madt *madt;
@@ -428,27 +428,35 @@ static int map_lapic_id(struct acpi_subtable_header *entry,
 }
 
 static int map_lsapic_id(struct acpi_subtable_header *entry,
-                  u32 acpi_id, int *apic_id)
+                int device_declaration, u32 acpi_id, int *apic_id)
 {
         struct acpi_madt_local_sapic *lsapic =
                 (struct acpi_madt_local_sapic *)entry;
+        u32 tmp = (lsapic->id << 8) | lsapic->eid;
+
         /* Only check enabled APICs*/
-        if (lsapic->lapic_flags & ACPI_MADT_ENABLED) {
-                /* First check against id */
-                if (lsapic->processor_id == acpi_id) {
-                        *apic_id = (lsapic->id << 8) | lsapic->eid;
-                        return 1;
-                /* Check against optional uid */
-                } else if (entry->length >= 16 &&
-                        lsapic->uid == acpi_id) {
-                        *apic_id = lsapic->uid;
-                        return 1;
-                }
-        }
+        if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))
+                return 0;
+
+        /* Device statement declaration type */
+        if (device_declaration) {
+                if (entry->length < 16)
+                        printk(KERN_ERR PREFIX
+                            "Invalid LSAPIC with Device type processor (SAPIC ID %#x)\n",
+                            tmp);
+                else if (lsapic->uid == acpi_id)
+                        goto found;
+        /* Processor statement declaration type */
+        } else if (lsapic->processor_id == acpi_id)
+                goto found;
+
         return 0;
+found:
+        *apic_id = tmp;
+        return 1;
 }
 
-static int map_madt_entry(u32 acpi_id)
+static int map_madt_entry(int type, u32 acpi_id)
 {
         unsigned long madt_end, entry;
         int apic_id = -1;
@@ -469,7 +477,7 @@ static int map_madt_entry(u32 acpi_id)
                         if (map_lapic_id(header, acpi_id, &apic_id))
                                 break;
                 } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
-                        if (map_lsapic_id(header, acpi_id, &apic_id))
+                        if (map_lsapic_id(header, type, acpi_id, &apic_id))
                                 break;
                 }
                 entry += header->length;
@@ -477,7 +485,7 @@ static int map_madt_entry(u32 acpi_id)
         return apic_id;
 }
 
-static int map_mat_entry(acpi_handle handle, u32 acpi_id)
+static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
 {
         struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
         union acpi_object *obj;
@@ -500,7 +508,7 @@ static int map_mat_entry(acpi_handle handle, u32 acpi_id)
         if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) {
                 map_lapic_id(header, acpi_id, &apic_id);
         } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
-                map_lsapic_id(header, acpi_id, &apic_id);
+                map_lsapic_id(header, type, acpi_id, &apic_id);
         }
 
 exit:
@@ -509,14 +517,14 @@ exit:
         return apic_id;
 }
 
-static int get_cpu_id(acpi_handle handle, u32 acpi_id)
+static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id)
 {
         int i;
         int apic_id = -1;
 
-        apic_id = map_mat_entry(handle, acpi_id);
+        apic_id = map_mat_entry(handle, type, acpi_id);
         if (apic_id == -1)
-                apic_id = map_madt_entry(acpi_id);
+                apic_id = map_madt_entry(type, acpi_id);
         if (apic_id == -1)
                 return apic_id;
 
@@ -532,15 +540,16 @@ static int get_cpu_id(acpi_handle handle, u32 acpi_id)
                                  Driver Interface
    -------------------------------------------------------------------------- */
 
-static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
+static int acpi_processor_get_info(struct acpi_device *device)
 {
         acpi_status status = 0;
         union acpi_object object = { 0 };
         struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
-        int cpu_index;
+        struct acpi_processor *pr;
+        int cpu_index, device_declaration = 0;
         static int cpu0_initialized;
 
-
+        pr = acpi_driver_data(device);
         if (!pr)
                 return -EINVAL;
 
@@ -561,22 +570,23 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
                                   "No bus mastering arbitration control\n"));
 
-        /* Check if it is a Device with HID and UID */
-        if (has_uid) {
+        if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_HID)) {
+                /*
+                 * Declared with "Device" statement; match _UID.
+                 * Note that we don't handle string _UIDs yet.
+                 */
                 unsigned long long value;
                 status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
                                                 NULL, &value);
                 if (ACPI_FAILURE(status)) {
-                        printk(KERN_ERR PREFIX "Evaluating processor _UID\n");
+                        printk(KERN_ERR PREFIX
+                            "Evaluating processor _UID [%#x]\n", status);
                         return -ENODEV;
                 }
+                device_declaration = 1;
                 pr->acpi_id = value;
         } else {
-                /*
-                * Evalute the processor object.  Note that it is common on SMP to
-                * have the first (boot) processor with a valid PBLK address while
-                * all others have a NULL address.
-                */
+                /* Declared with "Processor" statement; match ProcessorID */
                 status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
                 if (ACPI_FAILURE(status)) {
                         printk(KERN_ERR PREFIX "Evaluating processor object\n");
@@ -584,12 +594,13 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
                 }
 
                 /*
-                * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
-                *      >>> 'acpi_get_processor_id(acpi_id, &id)' in arch/xxx/acpi.c
-                */
+                 * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
+                 *      >>> 'acpi_get_processor_id(acpi_id, &id)' in
+                 *      arch/xxx/acpi.c
+                 */
                 pr->acpi_id = object.processor.proc_id;
         }
-        cpu_index = get_cpu_id(pr->handle, pr->acpi_id);
+        cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id);
 
         /* Handle UP system running SMP kernel, with no LAPIC in MADT */
         if (!cpu0_initialized && (cpu_index == -1) &&
@@ -661,7 +672,7 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device)
 
         pr = acpi_driver_data(device);
 
-        result = acpi_processor_get_info(pr, device->flags.unique_id);
+        result = acpi_processor_get_info(device);
         if (result) {
                 /* Processor is physically not present */
                 return 0;
@@ -761,20 +772,20 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data)
                 acpi_bus_generate_proc_event(device, event,
                                         pr->performance_platform_limit);
                 acpi_bus_generate_netlink_event(device->pnp.device_class,
-                                                  device->dev.bus_id, event,
+                                                  dev_name(&device->dev), event,
                                                   pr->performance_platform_limit);
                 break;
         case ACPI_PROCESSOR_NOTIFY_POWER:
                 acpi_processor_cst_has_changed(pr);
                 acpi_bus_generate_proc_event(device, event, 0);
                 acpi_bus_generate_netlink_event(device->pnp.device_class,
-                                                  device->dev.bus_id, event, 0);
+                                                  dev_name(&device->dev), event, 0);
                 break;
         case ACPI_PROCESSOR_NOTIFY_THROTTLING:
                 acpi_processor_tstate_has_changed(pr);
                 acpi_bus_generate_proc_event(device, event, 0);
                 acpi_bus_generate_netlink_event(device->pnp.device_class,
-                                                  device->dev.bus_id, event, 0);
+                                                  dev_name(&device->dev), event, 0);
         default:
                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
                                   "Unsupported event [0x%x]\n", event));
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 81b40ed5379e..5f8d746a9b81 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -59,7 +59,6 @@
 #include <acpi/processor.h>
 #include <asm/processor.h>
 
-#define ACPI_PROCESSOR_COMPONENT        0x01000000
 #define ACPI_PROCESSOR_CLASS            "processor"
 #define _COMPONENT              ACPI_PROCESSOR_COMPONENT
 ACPI_MODULE_NAME("processor_idle");
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index dbcf260ea93f..0d7b772bef50 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -44,9 +44,9 @@
 #endif
 
 #include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
 #include <acpi/processor.h>
 
-#define ACPI_PROCESSOR_COMPONENT        0x01000000
 #define ACPI_PROCESSOR_CLASS            "processor"
 #define ACPI_PROCESSOR_FILE_PERFORMANCE "performance"
 #define _COMPONENT              ACPI_PROCESSOR_COMPONENT
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index ef34b18f95ca..b1eb376fae45 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -40,7 +40,6 @@
 #include <acpi/processor.h>
 #include <acpi/acpi_drivers.h>
 
-#define ACPI_PROCESSOR_COMPONENT        0x01000000
 #define ACPI_PROCESSOR_CLASS            "processor"
 #define _COMPONENT              ACPI_PROCESSOR_COMPONENT
 ACPI_MODULE_NAME("processor_thermal");
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 3da2df93d924..a0c38c94a8a0 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -38,9 +38,9 @@
 #include <asm/uaccess.h>
 
 #include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
 #include <acpi/processor.h>
 
-#define ACPI_PROCESSOR_COMPONENT        0x01000000
 #define ACPI_PROCESSOR_CLASS            "processor"
 #define _COMPONENT              ACPI_PROCESSOR_COMPONENT
 ACPI_MODULE_NAME("processor_throttling");
diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c
index 755baf2ca70a..a6b662c00b67 100644
--- a/drivers/acpi/reboot.c
+++ b/drivers/acpi/reboot.c
@@ -15,28 +15,9 @@ void acpi_reboot(void)
 
         rr = &acpi_gbl_FADT.reset_register;
 
-        /*
-         * Is the ACPI reset register supported?
-         *
-         * According to ACPI 3.0, FADT.flags.RESET_REG_SUP indicates
-         * whether the ACPI reset mechanism is supported.
-         *
-         * However, some boxes have this bit clear, yet a valid
-         * ACPI_RESET_REG & RESET_VALUE, and ACPI reboot is the only
-         * mechanism that works for them after S3.
-         *
-         * This suggests that other operating systems may not be checking
-         * the RESET_REG_SUP bit, and are using other means to decide
-         * whether to use the ACPI reboot mechanism or not.
-         *
-         * So when acpi reboot is requested,
-         * only the reset_register is checked. If the following
-         * conditions are met, it indicates that the reset register is supported.
-         *      a. reset_register is not zero
-         *      b. the access width is eight
-         *      c. the bit_offset is zero
-         */
-        if (!(rr->address) || rr->bit_width != 8 || rr->bit_offset != 0)
+        /* Is the reset register supported? */
+        if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) ||
+            rr->bit_width != 8 || rr->bit_offset != 0)
                 return;
 
         reset_value = acpi_gbl_FADT.reset_value;
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index a9dda8e0f9f9..bd5253ee5c85 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -109,8 +109,7 @@ static int acpi_bus_hot_remove_device(void *context)
                 return 0;
 
         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-                "Hot-removing device %s...\n", device->dev.bus_id));
-
+                "Hot-removing device %s...\n", dev_name(&device->dev)));
 
         if (acpi_bus_trim(device, 1)) {
                 printk(KERN_ERR PREFIX
@@ -460,7 +459,7 @@ static int acpi_device_register(struct acpi_device *device,
                 acpi_device_bus_id->instance_no = 0;
                 list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list);
         }
-        sprintf(device->dev.bus_id, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no);
+        dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no);
 
         if (device->parent) {
                 list_add_tail(&device->node, &device->parent->children);
@@ -484,7 +483,8 @@ static int acpi_device_register(struct acpi_device *device,
 
         result = acpi_device_setup_files(device);
         if(result)
-                printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", device->dev.bus_id);
+                printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n",
+                       dev_name(&device->dev));
 
         device->removal_type = ACPI_BUS_REMOVAL_NORMAL;
         return 0;
@@ -919,36 +919,6 @@ static void acpi_device_get_busid(struct acpi_device *device,
         }
 }
 
-static int
-acpi_video_bus_match(struct acpi_device *device)
-{
-        acpi_handle h_dummy;
-
-        if (!device)
-                return -EINVAL;
-
-        /* Since there is no HID, CID for ACPI Video drivers, we have
-         * to check well known required nodes for each feature we support.
-         */
-
-        /* Does this device able to support video switching ? */
-        if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) &&
-            ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy)))
-                return 0;
-
-        /* Does this device able to retrieve a video ROM ? */
-        if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy)))
-                return 0;
-
-        /* Does this device able to configure which video head to be POSTed ? */
-        if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) &&
-            ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) &&
-            ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy)))
-                return 0;
-
-        return -ENODEV;
-}
-
 /*
  * acpi_bay_match - see if a device is an ejectable driver bay
  *
@@ -1031,7 +1001,7 @@ static void acpi_device_set_id(struct acpi_device *device,
                    will get autoloaded and the device might still match
                    against another driver.
                 */
-                if (ACPI_SUCCESS(acpi_video_bus_match(device)))
+                if (acpi_is_video_device(device))
                         cid_add = ACPI_VIDEO_HID;
                 else if (ACPI_SUCCESS(acpi_bay_match(device)))
                         cid_add = ACPI_BAY_HID;
@@ -1043,7 +1013,7 @@ static void acpi_device_set_id(struct acpi_device *device,
                 hid = ACPI_POWER_HID;
                 break;
         case ACPI_BUS_TYPE_PROCESSOR:
-                hid = ACPI_PROCESSOR_HID;
+                hid = ACPI_PROCESSOR_OBJECT_HID;
                 break;
         case ACPI_BUS_TYPE_SYSTEM:
                 hid = ACPI_SYSTEM_HID;
diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c
index 631ee2ee2ca0..4dbc2271acf5 100644
--- a/drivers/acpi/sleep/proc.c
+++ b/drivers/acpi/sleep/proc.c
@@ -367,7 +367,7 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset)
                 if (ldev)
                         seq_printf(seq, "%s:%s",
                                    ldev->bus ? ldev->bus->name : "no-bus",
-                                   ldev->bus_id);
+                                   dev_name(ldev));
                 seq_printf(seq, "\n");
                 put_device(ldev);
 
diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c
index 38655eb132dc..dea4c23df764 100644
--- a/drivers/acpi/sleep/wakeup.c
+++ b/drivers/acpi/sleep/wakeup.c
@@ -88,7 +88,7 @@ void acpi_enable_wakeup_device(u8 sleep_state)
                 spin_unlock(&acpi_device_lock);
                 if (!dev->wakeup.flags.run_wake)
                         acpi_enable_gpe(dev->wakeup.gpe_device,
-                                        dev->wakeup.gpe_number, ACPI_ISR);
+                                        dev->wakeup.gpe_number);
                 spin_lock(&acpi_device_lock);
         }
         spin_unlock(&acpi_device_lock);
@@ -122,7 +122,7 @@ void acpi_disable_wakeup_device(u8 sleep_state)
                                                   ACPI_GPE_TYPE_WAKE_RUN);
                                 /* Re-enable it, since set_gpe_type will disable it */
                                 acpi_enable_gpe(dev->wakeup.gpe_device,
-                                                dev->wakeup.gpe_number, ACPI_NOT_ISR);
+                                                dev->wakeup.gpe_number);
                                 spin_lock(&acpi_device_lock);
                         }
                         continue;
@@ -133,7 +133,7 @@ void acpi_disable_wakeup_device(u8 sleep_state)
                 /* Never disable run-wake GPE */
                 if (!dev->wakeup.flags.run_wake) {
                         acpi_disable_gpe(dev->wakeup.gpe_device,
-                                         dev->wakeup.gpe_number, ACPI_NOT_ISR);
+                                         dev->wakeup.gpe_number);
                         acpi_clear_gpe(dev->wakeup.gpe_device,
                                        dev->wakeup.gpe_number, ACPI_NOT_ISR);
                 }
@@ -162,7 +162,7 @@ static int __init acpi_wakeup_device_init(void)
                                   dev->wakeup.gpe_number,
                                   ACPI_GPE_TYPE_WAKE_RUN);
                 acpi_enable_gpe(dev->wakeup.gpe_device,
-                                dev->wakeup.gpe_number, ACPI_NOT_ISR);
+                                dev->wakeup.gpe_number);
                 dev->wakeup.state.enabled = 1;
                 spin_lock(&acpi_device_lock);
         }
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index 1d74171b7940..6e4107f82403 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -78,9 +78,15 @@ static ssize_t acpi_table_show(struct kobject *kobj,
             container_of(bin_attr, struct acpi_table_attr, attr);
         struct acpi_table_header *table_header = NULL;
         acpi_status status;
+        char name[ACPI_NAME_SIZE];
+
+        if (strncmp(table_attr->name, "NULL", 4))
+                memcpy(name, table_attr->name, ACPI_NAME_SIZE);
+        else
+                memcpy(name, "\0\0\0\0", 4);
 
         status =
-            acpi_get_table(table_attr->name, table_attr->instance,
+            acpi_get_table(name, table_attr->instance,
                            &table_header);
         if (ACPI_FAILURE(status))
                 return -ENODEV;
@@ -95,21 +101,24 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr,
         struct acpi_table_header *header = NULL;
         struct acpi_table_attr *attr = NULL;
 
-        memcpy(table_attr->name, table_header->signature, ACPI_NAME_SIZE);
+        if (table_header->signature[0] != '\0')
+                memcpy(table_attr->name, table_header->signature,
+                        ACPI_NAME_SIZE);
+        else
+                memcpy(table_attr->name, "NULL", 4);
 
         list_for_each_entry(attr, &acpi_table_attr_list, node) {
-                if (!memcmp(table_header->signature, attr->name,
-                            ACPI_NAME_SIZE))
+                if (!memcmp(table_attr->name, attr->name, ACPI_NAME_SIZE))
                         if (table_attr->instance < attr->instance)
                                 table_attr->instance = attr->instance;
         }
         table_attr->instance++;
 
         if (table_attr->instance > 1 || (table_attr->instance == 1 &&
-                                         !acpi_get_table(table_header->
-                                                         signature, 2,
-                                                         &header)))
-                sprintf(table_attr->name + 4, "%d", table_attr->instance);
+                                        !acpi_get_table
+                                        (table_header->signature, 2, &header)))
+                sprintf(table_attr->name + ACPI_NAME_SIZE, "%d",
+                        table_attr->instance);
 
         table_attr->attr.size = 0;
         table_attr->attr.read = acpi_table_show;
@@ -167,7 +176,6 @@ static int acpi_system_sysfs_init(void)
 #define COUNT_ERROR 2   /* other */
 #define NUM_COUNTERS_EXTRA 3
 
-#define ACPI_EVENT_VALID        0x01
 struct event_counter {
         u32 count;
         u32 flags;
@@ -312,12 +320,6 @@ static int get_status(u32 index, acpi_event_status *status, acpi_handle *handle)
         } else if (index < (num_gpes + ACPI_NUM_FIXED_EVENTS))
                 result = acpi_get_event_status(index - num_gpes, status);
 
-        /*
-         * sleep/power button GPE/Fixed Event is enabled after acpi_system_init,
-         * check the status at runtime and mark it as valid once it's enabled
-         */
-        if (!result && (*status & ACPI_EVENT_FLAG_ENABLED))
-                all_counters[index].flags |= ACPI_EVENT_VALID;
 end:
         return result;
 }
@@ -346,12 +348,14 @@ static ssize_t counter_show(struct kobject *kobj,
         if (result)
                 goto end;
 
-        if (!(all_counters[index].flags & ACPI_EVENT_VALID))
-                size += sprintf(buf + size, "  invalid");
+        if (!(status & ACPI_EVENT_FLAG_HANDLE))
+                size += sprintf(buf + size, "   invalid");
         else if (status & ACPI_EVENT_FLAG_ENABLED)
-                size += sprintf(buf + size, "   enable");
+                size += sprintf(buf + size, "   enabled");
+        else if (status & ACPI_EVENT_FLAG_WAKE_ENABLED)
+                size += sprintf(buf + size, "   wake_enabled");
         else
-                size += sprintf(buf + size, "  disable");
+                size += sprintf(buf + size, "   disabled");
 
 end:
         size += sprintf(buf + size, "\n");
@@ -385,7 +389,7 @@ static ssize_t counter_set(struct kobject *kobj,
         if (result)
                 goto end;
 
-        if (!(all_counters[index].flags & ACPI_EVENT_VALID)) {
+        if (!(status & ACPI_EVENT_FLAG_HANDLE)) {
                 printk(KERN_WARNING PREFIX
                         "Can not change Invalid GPE/Fixed Event status\n");
                 return -EINVAL;
@@ -394,10 +398,10 @@ static ssize_t counter_set(struct kobject *kobj,
         if (index < num_gpes) {
                 if (!strcmp(buf, "disable\n") &&
                                 (status & ACPI_EVENT_FLAG_ENABLED))
-                        result = acpi_disable_gpe(handle, index, ACPI_NOT_ISR);
+                        result = acpi_disable_gpe(handle, index);
                 else if (!strcmp(buf, "enable\n") &&
                                 !(status & ACPI_EVENT_FLAG_ENABLED))
-                        result = acpi_enable_gpe(handle, index, ACPI_NOT_ISR);
+                        result = acpi_enable_gpe(handle, index);
                 else if (!strcmp(buf, "clear\n") &&
                                 (status & ACPI_EVENT_FLAG_SET))
                         result = acpi_clear_gpe(handle, index, ACPI_NOT_ISR);
diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c
index 2c7885e7ffba..2817158fb6a1 100644
--- a/drivers/acpi/tables/tbfadt.c
+++ b/drivers/acpi/tables/tbfadt.c
@@ -304,7 +304,7 @@ static void acpi_tb_convert_fadt(void)
          * The ACPI 1.0 reserved fields that will be zeroed are the bytes located at
          * offset 45, 55, 95, and the word located at offset 109, 110.
          */
-        if (acpi_gbl_FADT.header.revision < 3) {
+        if (acpi_gbl_FADT.header.revision < FADT2_REVISION_ID) {
                 acpi_gbl_FADT.preferred_profile = 0;
                 acpi_gbl_FADT.pstate_control = 0;
                 acpi_gbl_FADT.cst_control = 0;
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index ad6cae938f0b..073ff09218a9 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -47,7 +47,6 @@
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
-#define ACPI_THERMAL_COMPONENT          0x04000000
 #define ACPI_THERMAL_CLASS              "thermal_zone"
 #define ACPI_THERMAL_DEVICE_NAME        "Thermal Zone"
 #define ACPI_THERMAL_FILE_STATE         "state"
@@ -576,7 +575,7 @@ static int acpi_thermal_critical(struct acpi_thermal *tz)
         acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL,
                                 tz->trips.critical.flags.enabled);
         acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
-                                          tz->device->dev.bus_id,
+                                          dev_name(&tz->device->dev),
                                           ACPI_THERMAL_NOTIFY_CRITICAL,
                                           tz->trips.critical.flags.enabled);
 
@@ -605,7 +604,7 @@ static int acpi_thermal_hot(struct acpi_thermal *tz)
         acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT,
                                 tz->trips.hot.flags.enabled);
         acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
-                                          tz->device->dev.bus_id,
+                                          dev_name(&tz->device->dev),
                                           ACPI_THERMAL_NOTIFY_HOT,
                                           tz->trips.hot.flags.enabled);
 
@@ -1592,14 +1591,14 @@ static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data)
                 acpi_thermal_check(tz);
                 acpi_bus_generate_proc_event(device, event, 0);
                 acpi_bus_generate_netlink_event(device->pnp.device_class,
-                                                  device->dev.bus_id, event, 0);
+                                                  dev_name(&device->dev), event, 0);
                 break;
         case ACPI_THERMAL_NOTIFY_DEVICES:
                 acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES);
                 acpi_thermal_check(tz);
                 acpi_bus_generate_proc_event(device, event, 0);
                 acpi_bus_generate_netlink_event(device->pnp.device_class,
-                                                  device->dev.bus_id, event, 0);
+                                                  dev_name(&device->dev), event, 0);
                 break;
         default:
                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index a29b0ccac65a..baa441929720 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -41,7 +41,6 @@
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
-#define ACPI_VIDEO_COMPONENT            0x08000000
 #define ACPI_VIDEO_CLASS                "video"
 #define ACPI_VIDEO_BUS_NAME             "Video Bus"
 #define ACPI_VIDEO_DEVICE_NAME          "Video Device"
@@ -739,7 +738,8 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
                 device->cap._DSS = 1;
         }
 
-        max_level = acpi_video_init_brightness(device);
+        if (acpi_video_backlight_support())
+                max_level = acpi_video_init_brightness(device);
 
         if (device->cap._BCL && device->cap._BCM && max_level > 0) {
                 int result;
@@ -785,18 +785,21 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
                         printk(KERN_ERR PREFIX "Create sysfs link\n");
 
         }
-        if (device->cap._DCS && device->cap._DSS){
-                static int count = 0;
-                char *name;
-                name = kzalloc(MAX_NAME_LEN, GFP_KERNEL);
-                if (!name)
-                        return;
-                sprintf(name, "acpi_video%d", count++);
-                device->output_dev = video_output_register(name,
-                                NULL, device, &acpi_output_properties);
-                kfree(name);
+
+        if (acpi_video_display_switch_support()) {
+
+                if (device->cap._DCS && device->cap._DSS) {
+                        static int count;
+                        char *name;
+                        name = kzalloc(MAX_NAME_LEN, GFP_KERNEL);
+                        if (!name)
+                                return;
+                        sprintf(name, "acpi_video%d", count++);
+                        device->output_dev = video_output_register(name,
+                                        NULL, device, &acpi_output_properties);
+                        kfree(name);
+                }
         }
-        return;
 }
 
 /*
@@ -842,11 +845,16 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video)
 static int acpi_video_bus_check(struct acpi_video_bus *video)
 {
         acpi_status status = -ENOENT;
-
+        struct device *dev;
 
         if (!video)
                 return -EINVAL;
 
+        dev = acpi_get_physical_pci_device(video->device->handle);
+        if (!dev)
+                return -ENODEV;
+        put_device(dev);
+
         /* Since there is no HID, CID and so on for VGA driver, we have
          * to check well known required nodes.
          */
@@ -2094,12 +2102,6 @@ static int __init acpi_video_init(void)
 {
         int result = 0;
 
-
-        /*
-           acpi_dbg_level = 0xFFFFFFFF;
-           acpi_dbg_layer = 0x08000000;
-         */
-
         acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir);
         if (!acpi_video_dir)
                 return -ENODEV;
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
new file mode 100644
index 000000000000..f022eb6f5637
--- /dev/null
+++ b/drivers/acpi/video_detect.c
@@ -0,0 +1,267 @@
+/*
+ *  Copyright (C) 2008       SuSE Linux Products GmbH
+ *                           Thomas Renninger <trenn@suse.de>
+ *
+ *  May be copied or modified under the terms of the GNU General Public License
+ *
+ * video_detect.c:
+ * Provides acpi_is_video_device() for early scanning of ACPI devices in scan.c
+ * There a Linux specific (Spec does not provide a HID for video devices) is
+ * assinged
+ *
+ * After PCI devices are glued with ACPI devices
+ * acpi_get_physical_pci_device() can be called to identify ACPI graphics
+ * devices for which a real graphics card is plugged in
+ *
+ * Now acpi_video_get_capabilities() can be called to check which
+ * capabilities the graphics cards plugged in support. The check for general
+ * video capabilities will be triggered by the first caller of
+ * acpi_video_get_capabilities(NULL); which will happen when the first
+ * backlight (or display output) switching supporting driver calls:
+ * acpi_video_backlight_support();
+ *
+ * Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B)
+ * are available, video.ko should be used to handle the device.
+ *
+ * Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi,
+ * sony_acpi,... can take care about backlight brightness and display output
+ * switching.
+ *
+ * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m)
+ * this file will not be compiled, acpi_video_get_capabilities() and
+ * acpi_video_backlight_support() will always return 0 and vendor specific
+ * drivers always can handle backlight.
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+
+ACPI_MODULE_NAME("video");
+#define _COMPONENT              ACPI_VIDEO_COMPONENT
+
+static long acpi_video_support;
+static bool acpi_video_caps_checked;
+
+static acpi_status
+acpi_backlight_cap_match(acpi_handle handle, u32 level, void *context,
+                          void **retyurn_value)
+{
+        long *cap = context;
+        acpi_handle h_dummy;
+
+        if (ACPI_SUCCESS(acpi_get_handle(handle, "_BCM", &h_dummy)) &&
+            ACPI_SUCCESS(acpi_get_handle(handle, "_BCL", &h_dummy))) {
+                ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found generic backlight "
+                                  "support\n"));
+                *cap |= ACPI_VIDEO_BACKLIGHT;
+                /* We have backlight support, no need to scan further */
+                return AE_CTRL_TERMINATE;
+        }
+        return 0;
+}
+
+/* Returns true if the device is a video device which can be handled by
+ * video.ko.
+ * The device will get a Linux specific CID added in scan.c to
+ * identify the device as an ACPI graphics device
+ * Be aware that the graphics device may not be physically present
+ * Use acpi_video_get_capabilities() to detect general ACPI video
+ * capabilities of present cards
+ */
+long acpi_is_video_device(struct acpi_device *device)
+{
+        acpi_handle h_dummy;
+        long video_caps = 0;
+
+        if (!device)
+                return 0;
+
+        /* Does this device able to support video switching ? */
+        if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) &&
+            ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy)))
+                video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING;
+
+        /* Does this device able to retrieve a video ROM ? */
+        if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy)))
+                video_caps |= ACPI_VIDEO_ROM_AVAILABLE;
+
+        /* Does this device able to configure which video head to be POSTed ? */
+        if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) &&
+            ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) &&
+            ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy)))
+                video_caps |= ACPI_VIDEO_DEVICE_POSTING;
+
+        /* Only check for backlight functionality if one of the above hit. */
+        if (video_caps)
+                acpi_walk_namespace(ACPI_TYPE_DEVICE, device->handle,
+                                    ACPI_UINT32_MAX, acpi_backlight_cap_match,
+                                    &video_caps, NULL);
+
+        return video_caps;
+}
+EXPORT_SYMBOL(acpi_is_video_device);
+
+static acpi_status
+find_video(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+        long *cap = context;
+        struct device *dev;
+        struct acpi_device *acpi_dev;
+
+        const struct acpi_device_id video_ids[] = {
+                {ACPI_VIDEO_HID, 0},
+                {"", 0},
+        };
+        if (acpi_bus_get_device(handle, &acpi_dev))
+                return AE_OK;
+
+        if (!acpi_match_device_ids(acpi_dev, video_ids)) {
+                dev = acpi_get_physical_pci_device(handle);
+                if (!dev)
+                        return AE_OK;
+                put_device(dev);
+                *cap |= acpi_is_video_device(acpi_dev);
+        }
+        return AE_OK;
+}
+
+/*
+ * Returns the video capabilities of a specific ACPI graphics device
+ *
+ * if NULL is passed as argument all ACPI devices are enumerated and
+ * all graphics capabilities of physically present devices are
+ * summerized and returned. This is cached and done only once.
+ */
+long acpi_video_get_capabilities(acpi_handle graphics_handle)
+{
+        long caps = 0;
+        struct acpi_device *tmp_dev;
+        acpi_status status;
+
+        if (acpi_video_caps_checked && graphics_handle == NULL)
+                return acpi_video_support;
+
+        if (!graphics_handle) {
+                /* Only do the global walk through all graphics devices once */
+                acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+                                    ACPI_UINT32_MAX, find_video,
+                                    &caps, NULL);
+                /* There might be boot param flags set already... */
+                acpi_video_support |= caps;
+                acpi_video_caps_checked = 1;
+                /* Add blacklists here. Be careful to use the right *DMI* bits
+                 * to still be able to override logic via boot params, e.g.:
+                 *
+                 *   if (dmi_name_in_vendors("XY")) {
+                 *      acpi_video_support |=
+                 *              ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR;
+                 *      acpi_video_support |=
+                 *              ACPI_VIDEO_BACKLIGHT_DMI_VENDOR;
+                 *}
+                 */
+        } else {
+                status = acpi_bus_get_device(graphics_handle, &tmp_dev);
+                if (ACPI_FAILURE(status)) {
+                        ACPI_EXCEPTION((AE_INFO, status, "Invalid device"));
+                        return 0;
+                }
+                acpi_walk_namespace(ACPI_TYPE_DEVICE, graphics_handle,
+                                    ACPI_UINT32_MAX, find_video,
+                                    &caps, NULL);
+        }
+        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "We have 0x%lX video support %s %s\n",
+                          graphics_handle ? caps : acpi_video_support,
+                          graphics_handle ? "on device " : "in general",
+                          graphics_handle ? acpi_device_bid(tmp_dev) : ""));
+        return caps;
+}
+EXPORT_SYMBOL(acpi_video_get_capabilities);
+
+/* Returns true if video.ko can do backlight switching */
+int acpi_video_backlight_support(void)
+{
+        /*
+         * We must check whether the ACPI graphics device is physically plugged
+         * in. Therefore this must be called after binding PCI and ACPI devices
+         */
+        if (!acpi_video_caps_checked)
+                acpi_video_get_capabilities(NULL);
+
+        /* First check for boot param -> highest prio */
+        if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR)
+                return 0;
+        else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO)
+                return 1;
+
+        /* Then check for DMI blacklist -> second highest prio */
+        if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VENDOR)
+                return 0;
+        else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VIDEO)
+                return 1;
+
+        /* Then go the default way */
+        return acpi_video_support & ACPI_VIDEO_BACKLIGHT;
+}
+EXPORT_SYMBOL(acpi_video_backlight_support);
+
+/*
+ * Returns true if video.ko can do display output switching.
+ * This does not work well/at all with binary graphics drivers
+ * which disable system io ranges and do it on their own.
+ */
+int acpi_video_display_switch_support(void)
+{
+        if (!acpi_video_caps_checked)
+                acpi_video_get_capabilities(NULL);
+
+        if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR)
+                return 0;
+        else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO)
+                return 1;
+
+        if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR)
+                return 0;
+        else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO)
+                return 1;
+
+        return acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING;
+}
+EXPORT_SYMBOL(acpi_video_display_switch_support);
+
+/*
+ * Use acpi_display_output=vendor/video or acpi_backlight=vendor/video
+ * To force that backlight or display output switching is processed by vendor
+ * specific acpi drivers or video.ko driver.
+ */
+int __init acpi_backlight(char *str)
+{
+        if (str == NULL || *str == '\0')
+                return 1;
+        else {
+                if (!strcmp("vendor", str))
+                        acpi_video_support |=
+                                ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR;
+                if (!strcmp("video", str))
+                        acpi_video_support |=
+                                ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO;
+        }
+        return 1;
+}
+__setup("acpi_backlight=", acpi_backlight);
+
+int __init acpi_display_output(char *str)
+{
+        if (str == NULL || *str == '\0')
+                return 1;
+        else {
+                if (!strcmp("vendor", str))
+                        acpi_video_support |=
+                                ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR;
+                if (!strcmp("video", str))
+                        acpi_video_support |=
+                                ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO;
+        }
+        return 1;
+}
+__setup("acpi_display_output=", acpi_display_output);
diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c
index 47cd7baf9b1b..8a8b377712c9 100644
--- a/drivers/acpi/wmi.c
+++ b/drivers/acpi/wmi.c
@@ -660,7 +660,7 @@ static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data)
                                 wblock->handler(event, wblock->handler_data);
 
                         acpi_bus_generate_netlink_event(
-                                device->pnp.device_class, device->dev.bus_id,
+                                device->pnp.device_class, dev_name(&device->dev),
                                 event, 0);
                         break;
                 }
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 622350d9b2e3..4214bfb13bbd 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -612,7 +612,7 @@ u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
                 if (tf->flags & ATA_TFLAG_LBA48) {
                         block |= (u64)tf->hob_lbah << 40;
                         block |= (u64)tf->hob_lbam << 32;
-                        block |= tf->hob_lbal << 24;
+                        block |= (u64)tf->hob_lbal << 24;
                 } else
                         block |= (tf->device & 0xf) << 24;
 
@@ -1712,6 +1712,8 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
         else
                 tag = 0;
 
+        if (test_and_set_bit(tag, &ap->qc_allocated))
+                BUG();
         qc = __ata_qc_from_tag(ap, tag);
 
         qc->tag = tag;
@@ -4563,6 +4565,37 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
 }
 
 /**
+ *      ata_qc_new - Request an available ATA command, for queueing
+ *      @ap: Port associated with device @dev
+ *      @dev: Device from whom we request an available command structure
+ *
+ *      LOCKING:
+ *      None.
+ */
+
+static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
+{
+        struct ata_queued_cmd *qc = NULL;
+        unsigned int i;
+
+        /* no command while frozen */
+        if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
+                return NULL;
+
+        /* the last tag is reserved for internal command. */
+        for (i = 0; i < ATA_MAX_QUEUE - 1; i++)
+                if (!test_and_set_bit(i, &ap->qc_allocated)) {
+                        qc = __ata_qc_from_tag(ap, i);
+                        break;
+                }
+
+        if (qc)
+                qc->tag = i;
+
+        return qc;
+}
+
+/**
  *      ata_qc_new_init - Request an available ATA command, and initialize it
  *      @dev: Device from whom we request an available command structure
  *      @tag: command tag
@@ -4571,20 +4604,16 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
  *      None.
  */
 
-struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag)
+struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev)
 {
         struct ata_port *ap = dev->link->ap;
         struct ata_queued_cmd *qc;
 
-        if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
-                return NULL;
-
-        qc = __ata_qc_from_tag(ap, tag);
+        qc = ata_qc_new(ap);
         if (qc) {
                 qc->scsicmd = NULL;
                 qc->ap = ap;
                 qc->dev = dev;
-                qc->tag = tag;
 
                 ata_qc_reinit(qc);
         }
@@ -4592,6 +4621,31 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag)
         return qc;
 }
 
+/**
+ *      ata_qc_free - free unused ata_queued_cmd
+ *      @qc: Command to complete
+ *
+ *      Designed to free unused ata_queued_cmd object
+ *      in case something prevents using it.
+ *
+ *      LOCKING:
+ *      spin_lock_irqsave(host lock)
+ */
+void ata_qc_free(struct ata_queued_cmd *qc)
+{
+        struct ata_port *ap = qc->ap;
+        unsigned int tag;
+
+        WARN_ON(qc == NULL);    /* ata_qc_from_tag _might_ return NULL */
+
+        qc->flags = 0;
+        tag = qc->tag;
+        if (likely(ata_tag_valid(tag))) {
+                qc->tag = ATA_TAG_POISON;
+                clear_bit(tag, &ap->qc_allocated);
+        }
+}
+
 void __ata_qc_complete(struct ata_queued_cmd *qc)
 {
         struct ata_port *ap = qc->ap;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 8077bdf5d30d..32da9a93ce44 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -610,9 +610,6 @@ void ata_scsi_error(struct Scsi_Host *host)
                                 if (ata_ncq_enabled(dev))
                                         ehc->saved_ncq_enabled |= 1 << devno;
                         }
-
-                        /* set last reset timestamp to some time in the past */
-                        ehc->last_reset = jiffies - 60 * HZ;
                 }
 
                 ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS;
@@ -2281,17 +2278,21 @@ int ata_eh_reset(struct ata_link *link, int classify,
         if (link->flags & ATA_LFLAG_NO_SRST)
                 softreset = NULL;
 
-        now = jiffies;
-        deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN);
-        if (time_before(now, deadline))
-                schedule_timeout_uninterruptible(deadline - now);
+        /* make sure each reset attemp is at least COOL_DOWN apart */
+        if (ehc->i.flags & ATA_EHI_DID_RESET) {
+                now = jiffies;
+                WARN_ON(time_after(ehc->last_reset, now));
+                deadline = ata_deadline(ehc->last_reset,
+                                        ATA_EH_RESET_COOL_DOWN);
+                if (time_before(now, deadline))
+                        schedule_timeout_uninterruptible(deadline - now);
+        }
 
         spin_lock_irqsave(ap->lock, flags);
         ap->pflags |= ATA_PFLAG_RESETTING;
         spin_unlock_irqrestore(ap->lock, flags);
 
         ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
-        ehc->last_reset = jiffies;
 
         ata_link_for_each_dev(dev, link) {
                 /* If we issue an SRST then an ATA drive (not ATAPI)
@@ -2379,7 +2380,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
         /*
          * Perform reset
          */
-        ehc->last_reset = jiffies;
         if (ata_is_host_link(link))
                 ata_eh_freeze_port(ap);
 
@@ -2391,6 +2391,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
                                         reset == softreset ? "soft" : "hard");
 
                 /* mark that this EH session started with reset */
+                ehc->last_reset = jiffies;
                 if (reset == hardreset)
                         ehc->i.flags |= ATA_EHI_DID_HARDRESET;
                 else
@@ -2535,7 +2536,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
         ata_eh_done(link, NULL, ATA_EH_RESET);
         if (slave)
                 ata_eh_done(slave, NULL, ATA_EH_RESET);
-        ehc->last_reset = jiffies;
+        ehc->last_reset = jiffies;      /* update to completion time */
         ehc->i.action |= ATA_EH_REVALIDATE;
 
         rc = 0;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 3fa75eac135d..47c7afcb36f2 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -709,11 +709,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
 {
         struct ata_queued_cmd *qc;
 
-        if (cmd->request->tag != -1)
-                qc = ata_qc_new_init(dev, cmd->request->tag);
-        else
-                qc = ata_qc_new_init(dev, 0);
-
+        qc = ata_qc_new_init(dev);
         if (qc) {
                 qc->scsicmd = cmd;
                 qc->scsidone = done;
@@ -1108,17 +1104,7 @@ static int ata_scsi_dev_config(struct scsi_device *sdev,
 
                 depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id));
                 depth = min(ATA_MAX_QUEUE - 1, depth);
-
-                /*
-                 * If this device is behind a port multiplier, we have
-                 * to share the tag map between all devices on that PMP.
-                 * Set up the shared tag map here and we get automatic.
-                 */
-                if (dev->link->ap->pmp_link)
-                        scsi_init_shared_tag_map(sdev->host, ATA_MAX_QUEUE - 1);
-
-                scsi_set_tag_type(sdev, MSG_SIMPLE_TAG);
-                scsi_activate_tcq(sdev, depth);
+                scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth);
         }
 
         return 0;
@@ -1958,11 +1944,6 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
                 hdr[1] |= (1 << 7);
 
         memcpy(rbuf, hdr, sizeof(hdr));
-
-        /* if ncq, set tags supported */
-        if (ata_id_has_ncq(args->id))
-                rbuf[7] |= (1 << 1);
-
         memcpy(&rbuf[8], "ATA     ", 8);
         ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16);
         ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 4b4739486327..9033d164c4ec 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1227,10 +1227,19 @@ fsm_start:
                         /* ATA PIO protocol */
                         if (unlikely((status & ATA_DRQ) == 0)) {
                                 /* handle BSY=0, DRQ=0 as error */
-                                if (likely(status & (ATA_ERR | ATA_DF)))
+                                if (likely(status & (ATA_ERR | ATA_DF))) {
                                         /* device stops HSM for abort/error */
                                         qc->err_mask |= AC_ERR_DEV;
-                                else {
+
+                                        /* If diagnostic failed and this is
+                                         * IDENTIFY, it's likely a phantom
+                                         * device.  Mark hint.
+                                         */
+                                        if (qc->dev->horkage &
+                                            ATA_HORKAGE_DIAGNOSTIC)
+                                                qc->err_mask |=
+                                                        AC_ERR_NODEV_HINT;
+                                } else {
                                         /* HSM violation. Let EH handle this.
                                          * Phantom devices also trigger this
                                          * condition.  Mark hint.
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index d3831d39bdaa..fe2839e58774 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -74,7 +74,7 @@ extern struct ata_link *ata_dev_phys_link(struct ata_device *dev);
 extern void ata_force_cbl(struct ata_port *ap);
 extern u64 ata_tf_to_lba(const struct ata_taskfile *tf);
 extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf);
-extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag);
+extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
 extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
                            u64 block, u32 n_block, unsigned int tf_flags,
                            unsigned int tag);
@@ -103,6 +103,7 @@ extern int ata_dev_configure(struct ata_device *dev);
 extern int sata_down_spd_limit(struct ata_link *link);
 extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
 extern void ata_sg_clean(struct ata_queued_cmd *qc);
+extern void ata_qc_free(struct ata_queued_cmd *qc);
 extern void ata_qc_issue(struct ata_queued_cmd *qc);
 extern void __ata_qc_complete(struct ata_queued_cmd *qc);
 extern int atapi_check_dma(struct ata_queued_cmd *qc);
@@ -118,22 +119,6 @@ extern struct ata_port *ata_port_alloc(struct ata_host *host);
 extern void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy);
 extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm);
 
-/**
- *      ata_qc_free - free unused ata_queued_cmd
- *      @qc: Command to complete
- *
- *      Designed to free unused ata_queued_cmd object
- *      in case something prevents using it.
- *
- *      LOCKING:
- *      spin_lock_irqsave(host lock)
- */
-static inline void ata_qc_free(struct ata_queued_cmd *qc)
-{
-        qc->flags = 0;
-        qc->tag = ATA_TAG_POISON;
-}
-
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
 extern void ata_acpi_associate_sata_port(struct ata_port *ap);
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 1b2d4a0f5f74..8b236af84c2e 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -72,7 +72,6 @@
 /**
  *      cs5535_cable_detect     -       detect cable type
  *      @ap: Port to detect on
- *      @deadline: deadline jiffies for the operation
  *
  *      Perform cable detection for ATA66 capable cable. Return a libata
  *      cable type.
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 73f8332cb679..afed92976198 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -110,7 +110,6 @@ static inline int cs5536_write(struct pci_dev *pdev, int reg, int val)
 /**
  *      cs5536_cable_detect     -       detect cable type
  *      @ap: Port to detect on
- *      @deadline: deadline jiffies for the operation
  *
  *      Perform cable detection for ATA66 capable cable. Return a libata
  *      cable type.
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 271cb64d429e..64b2e2281ee7 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -416,6 +416,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
         PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
         PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
         PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
+        PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506),
         PCMCIA_DEVICE_NULL,
 };
 
diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c
index c8cc027789fe..6aeeeeb34124 100644
--- a/drivers/ata/pata_sch.c
+++ b/drivers/ata/pata_sch.c
@@ -83,7 +83,7 @@ static struct ata_port_operations sch_pata_ops = {
 };
 
 static struct ata_port_info sch_port_info = {
-        .flags          = 0,
+        .flags          = ATA_FLAG_SLAVE_POSS,
         .pio_mask       = ATA_PIO4,   /* pio0-4 */
         .mwdma_mask     = ATA_MWDMA2, /* mwdma0-2 */
         .udma_mask      = ATA_UDMA5,  /* udma0-5 */
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 61ad8d639ba3..0344a8a8321d 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -21,7 +21,8 @@ config BLK_DEV_FD
         ---help---
           If you want to use the floppy disk drive(s) of your PC under Linux,
           say Y. Information about this driver, especially important for IBM
-          Thinkpad users, is contained in <file:Documentation/floppy.txt>.
+          Thinkpad users, is contained in
+          <file:Documentation/blockdev/floppy.txt>.
           That file also contains the location of the Floppy driver FAQ as
           well as location of the fdutils package used to configure additional
           parameters of the driver at run time.
@@ -76,7 +77,7 @@ config PARIDE
           your computer's parallel port. Most of them are actually IDE devices
           using a parallel port IDE adapter. This option enables the PARIDE
           subsystem which contains drivers for many of these external drives.
-          Read <file:Documentation/paride.txt> for more information.
+          Read <file:Documentation/blockdev/paride.txt> for more information.
 
           If you have said Y to the "Parallel-port support" configuration
           option, you may share a single port between your printer and other
@@ -114,9 +115,9 @@ config BLK_CPQ_DA
         help
           This is the driver for Compaq Smart Array controllers.  Everyone
           using these boards should say Y here.  See the file
-          <file:Documentation/cpqarray.txt> for the current list of boards
-          supported by this driver, and for further information on the use of
-          this driver.
+          <file:Documentation/blockdev/cpqarray.txt> for the current list of
+          boards supported by this driver, and for further information on the
+          use of this driver.
 
 config BLK_CPQ_CISS_DA
         tristate "Compaq Smart Array 5xxx support"
@@ -124,7 +125,7 @@ config BLK_CPQ_CISS_DA
         help
           This is the driver for Compaq Smart Array 5xxx controllers.
           Everyone using these boards should say Y here.
-          See <file:Documentation/cciss.txt> for the current list of
+          See <file:Documentation/blockdev/cciss.txt> for the current list of
           boards supported by this driver, and for further information
           on the use of this driver.
 
@@ -135,7 +136,7 @@ config CISS_SCSI_TAPE
         help
           When enabled (Y), this option allows SCSI tape drives and SCSI medium
           changers (tape robots) to be accessed via a Compaq 5xxx array 
-          controller.  (See <file:Documentation/cciss.txt> for more details.)
+          controller.  (See <file:Documentation/blockdev/cciss.txt> for more details.)
 
           "SCSI support" and "SCSI tape support" must also be enabled for this 
           option to work.
@@ -149,8 +150,8 @@ config BLK_DEV_DAC960
         help
           This driver adds support for the Mylex DAC960, AcceleRAID, and
           eXtremeRAID PCI RAID controllers.  See the file
-          <file:Documentation/README.DAC960> for further information about
-          this driver.
+          <file:Documentation/blockdev/README.DAC960> for further information
+          about this driver.
 
           To compile this driver as a module, choose M here: the
           module will be called DAC960.
@@ -278,9 +279,9 @@ config BLK_DEV_NBD
           userland (making server and client physically the same computer,
           communicating using the loopback network device).
 
-          Read <file:Documentation/nbd.txt> for more information, especially
-          about where to find the server code, which runs in user space and
-          does not need special kernel support.
+          Read <file:Documentation/blockdev/nbd.txt> for more information,
+          especially about where to find the server code, which runs in user
+          space and does not need special kernel support.
 
           Note that this has nothing to do with the network file systems NFS
           or Coda; you can say N here even if you intend to use NFS or Coda.
@@ -321,8 +322,8 @@ config BLK_DEV_RAM
           store a copy of a minimal root file system off of a floppy into RAM
           during the initial install of Linux.
 
-          Note that the kernel command line option "ramdisk=XX" is now
-          obsolete. For details, read <file:Documentation/ramdisk.txt>.
+          Note that the kernel command line option "ramdisk=XX" is now obsolete.
+          For details, read <file:Documentation/blockdev/ramdisk.txt>.
 
           To compile this driver as a module, choose M here: the
           module will be called rd.
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 14db747a636e..cf29cc4e6ab7 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4124,7 +4124,7 @@ static int __init floppy_setup(char *str)
                 printk("\n");
         } else
                 DPRINT("botched floppy option\n");
-        DPRINT("Read Documentation/floppy.txt\n");
+        DPRINT("Read Documentation/blockdev/floppy.txt\n");
         return 0;
 }
 
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index fccac18d3111..048d71d244d7 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1546,8 +1546,6 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
 
 /*
  * Reset management
- * XXX Move usb_reset_device to khubd. Hogging kevent is not a good thing.
- * XXX Make usb_sync_reset asynchronous.
  */
 
 static void ub_reset_enter(struct ub_dev *sc, int try)
@@ -1633,6 +1631,22 @@ static void ub_reset_task(struct work_struct *work)
 }
 
 /*
+ * XXX Reset brackets are too much hassle to implement, so just stub them
+ * in order to prevent forced unbinding (which deadlocks solid when our
+ * ->disconnect method waits for the reset to complete and this kills keventd).
+ *
+ * XXX Tell Alan to move usb_unlock_device inside of usb_reset_device,
+ * or else the post_reset is invoked, and restats I/O on a locked device.
+ */
+static int ub_pre_reset(struct usb_interface *iface) {
+        return 0;
+}
+
+static int ub_post_reset(struct usb_interface *iface) {
+        return 0;
+}
+
+/*
  * This is called from a process context.
  */
 static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun)
@@ -2446,6 +2460,8 @@ static struct usb_driver ub_driver = {
         .probe =        ub_probe,
         .disconnect =   ub_disconnect,
         .id_table =     ub_usb_ids,
+        .pre_reset =    ub_pre_reset,
+        .post_reset =   ub_post_reset,
 };
 
 static int __init ub_init(void)
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 43b35d0369d6..43d6ba83a191 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -124,7 +124,7 @@ config COMPUTONE
           which give you many serial ports. You would need something like this
           to connect more than two modems to your Linux box, for instance in
           order to become a dial-in server. If you have a card like that, say
-          Y here and read <file:Documentation/computone.txt>.
+          Y here and read <file:Documentation/serial/computone.txt>.
 
           To compile this driver as module, choose M here: the
           module will be called ip2.
@@ -136,7 +136,7 @@ config ROCKETPORT
           This driver supports Comtrol RocketPort and RocketModem PCI boards.   
           These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
           modems.  For information about the RocketPort/RocketModem  boards
-          and this driver read <file:Documentation/rocket.txt>.
+          and this driver read <file:Documentation/serial/rocket.txt>.
 
           To compile this driver as a module, choose M here: the
           module will be called rocket.
@@ -154,7 +154,7 @@ config CYCLADES
           your Linux box, for instance in order to become a dial-in server.
 
           For information about the Cyclades-Z card, read
-          <file:Documentation/README.cycladesZ>.
+          <file:Documentation/serial/README.cycladesZ>.
 
           To compile this driver as a module, choose M here: the
           module will be called cyclades.
@@ -183,7 +183,7 @@ config DIGIEPCA
           box, for instance in order to become a dial-in server. This driver
           supports the original PC (ISA) boards as well as PCI, and EISA. If
           you have a card like this, say Y here and read the file
-          <file:Documentation/digiepca.txt>.
+          <file:Documentation/serial/digiepca.txt>.
 
           To compile this driver as a module, choose M here: the
           module will be called epca.
@@ -289,7 +289,7 @@ config RISCOM8
           which gives you many serial ports. You would need something like
           this to connect more than two modems to your Linux box, for instance
           in order to become a dial-in server. If you have a card like that,
-          say Y here and read the file <file:Documentation/riscom8.txt>.
+          say Y here and read the file <file:Documentation/serial/riscom8.txt>.
 
           Also it's possible to say M here and compile this driver as kernel
           loadable module; the module will be called riscom8.
@@ -304,8 +304,8 @@ config SPECIALIX
           your Linux box, for instance in order to become a dial-in server.
 
           If you have a card like that, say Y here and read the file
-          <file:Documentation/specialix.txt>. Also it's possible to say M here
-          and compile this driver as kernel loadable module which will be
+          <file:Documentation/serial/specialix.txt>. Also it's possible to say
+          M here and compile this driver as kernel loadable module which will be
           called specialix.
 
 config SX
@@ -313,7 +313,7 @@ config SX
         depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
         help
           This is a driver for the SX and SI multiport serial cards.
-          Please read the file <file:Documentation/sx.txt> for details.
+          Please read the file <file:Documentation/serial/sx.txt> for details.
 
           This driver can only be built as a module ( = code which can be
           inserted in and removed from the running kernel whenever you want).
@@ -344,8 +344,8 @@ config STALDRV
           like this to connect more than two modems to your Linux box, for
           instance in order to become a dial-in server.  If you say Y here,
           you will be asked for your specific card model in the next
-          questions.  Make sure to read <file:Documentation/stallion.txt> in
-          this case.  If you have never heard about all this, it's safe to
+          questions.  Make sure to read <file:Documentation/serial/stallion.txt>
+          in this case.  If you have never heard about all this, it's safe to
           say N.
 
 config STALLION
@@ -354,7 +354,7 @@ config STALLION
         help
           If you have an EasyIO or EasyConnection 8/32 multiport Stallion
           card, then this is for you; say Y.  Make sure to read
-          <file:Documentation/stallion.txt>.
+          <file:Documentation/serial/stallion.txt>.
 
           To compile this driver as a module, choose M here: the
           module will be called stallion.
@@ -365,7 +365,7 @@ config ISTALLION
         help
           If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
           serial multiport card, say Y here. Make sure to read
-          <file:Documentation/stallion.txt>.
+          <file:Documentation/serial/stallion.txt>.
 
           To compile this driver as a module, choose M here: the
           module will be called istallion.
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 8a59aaa21be5..7a88dfd4427b 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -422,9 +422,11 @@ struct ipmi_smi {
 /**
  * The driver model view of the IPMI messaging driver.
  */
-static struct device_driver ipmidriver = {
-        .name = "ipmi",
-        .bus = &platform_bus_type
+static struct platform_driver ipmidriver = {
+        .driver = {
+                .name = "ipmi",
+                .bus = &platform_bus_type
+        }
 };
 static DEFINE_MUTEX(ipmidriver_mutex);
 
@@ -2384,9 +2386,9 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum,
          * representing the interfaced BMC already
          */
         if (bmc->guid_set)
-                old_bmc = ipmi_find_bmc_guid(&ipmidriver, bmc->guid);
+                old_bmc = ipmi_find_bmc_guid(&ipmidriver.driver, bmc->guid);
         else
-                old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver,
+                old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver.driver,
                                                     bmc->id.product_id,
                                                     bmc->id.device_id);
 
@@ -2416,7 +2418,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum,
                 snprintf(name, sizeof(name),
                          "ipmi_bmc.%4.4x", bmc->id.product_id);
 
-                while (ipmi_find_bmc_prod_dev_id(&ipmidriver,
+                while (ipmi_find_bmc_prod_dev_id(&ipmidriver.driver,
                                                  bmc->id.product_id,
                                                  bmc->id.device_id)) {
                         if (!warn_printed) {
@@ -2446,7 +2448,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum,
                                " Unable to allocate platform device\n");
                         return -ENOMEM;
                 }
-                bmc->dev->dev.driver = &ipmidriver;
+                bmc->dev->dev.driver = &ipmidriver.driver;
                 dev_set_drvdata(&bmc->dev->dev, bmc);
                 kref_init(&bmc->refcount);
 
@@ -4247,7 +4249,7 @@ static int ipmi_init_msghandler(void)
         if (initialized)
                 return 0;
 
-        rv = driver_register(&ipmidriver);
+        rv = driver_register(&ipmidriver.driver);
         if (rv) {
                 printk(KERN_ERR PFX "Could not register IPMI driver\n");
                 return rv;
@@ -4308,7 +4310,7 @@ static __exit void cleanup_ipmi(void)
         remove_proc_entry(proc_ipmi_root->name, NULL);
 #endif /* CONFIG_PROC_FS */
 
-        driver_unregister(&ipmidriver);
+        driver_unregister(&ipmidriver.driver);
 
         initialized = 0;
 
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 3123bf57ad91..3000135f2ead 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -114,9 +114,11 @@ static char *si_to_str[] = { "kcs", "smic", "bt" };
 
 #define DEVICE_NAME "ipmi_si"
 
-static struct device_driver ipmi_driver = {
-        .name = DEVICE_NAME,
-        .bus = &platform_bus_type
+static struct platform_driver ipmi_driver = {
+        .driver = {
+                .name = DEVICE_NAME,
+                .bus = &platform_bus_type
+        }
 };
 
 
@@ -2868,7 +2870,7 @@ static int try_smi_init(struct smi_info *new_smi)
                         goto out_err;
                 }
                 new_smi->dev = &new_smi->pdev->dev;
-                new_smi->dev->driver = &ipmi_driver;
+                new_smi->dev->driver = &ipmi_driver.driver;
 
                 rv = platform_device_add(new_smi->pdev);
                 if (rv) {
@@ -2983,7 +2985,7 @@ static __devinit int init_ipmi_si(void)
         initialized = 1;
 
         /* Register the device drivers. */
-        rv = driver_register(&ipmi_driver);
+        rv = driver_register(&ipmi_driver.driver);
         if (rv) {
                 printk(KERN_ERR
                        "init_ipmi_si: Unable to register driver: %d\n",
@@ -3052,7 +3054,7 @@ static __devinit int init_ipmi_si(void)
 #ifdef CONFIG_PPC_OF
                 of_unregister_platform_driver(&ipmi_of_platform_driver);
 #endif
-                driver_unregister(&ipmi_driver);
+                driver_unregister(&ipmi_driver.driver);
                 printk(KERN_WARNING
                        "ipmi_si: Unable to find any System Interface(s)\n");
                 return -ENODEV;
@@ -3151,7 +3153,7 @@ static __exit void cleanup_ipmi_si(void)
                 cleanup_one_si(e);
         mutex_unlock(&smi_infos_lock);
 
-        driver_unregister(&ipmi_driver);
+        driver_unregister(&ipmi_driver.driver);
 }
 module_exit(cleanup_ipmi_si);
 
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 7d30ee1d3fca..04e4549299ba 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -7,12 +7,14 @@
  *      Original driver code supplied by Multi-Tech
  *
  *      Changes
- *      1/9/98  alan@redhat.com         Merge to 2.0.x kernel tree
+ *      1/9/98  alan@lxorguk.ukuu.org.uk
+ *                                      Merge to 2.0.x kernel tree
  *                                      Obtain and use official major/minors
  *                                      Loader switched to a misc device
  *                                      (fixed range check bug as a side effect)
  *                                      Printk clean up
- *      9/12/98 alan@redhat.com         Rough port to 2.1.x
+ *      9/12/98 alan@lxorguk.ukuu.org.uk
+ *                                      Rough port to 2.1.x
  *
  *      10/6/99 sameer                  Merged the ISA and PCI drivers to
  *                                      a new unified driver.
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 8beef50f95a0..047766915411 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -14,7 +14,8 @@
  *      (at your option) any later version.
  *
  *      Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
- *      <alan@redhat.com>. The original 1.8 code is available on www.moxa.com.
+ *      <alan@lxorguk.ukuu.org.uk>. The original 1.8 code is available on
+ *      www.moxa.com.
  *      - Fixed x86_64 cleanness
  */
 
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index 2457b07dabd6..f4374437a033 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -523,7 +523,7 @@ static int acpi_driver_registered;
 
 static int sonypi_ec_write(u8 addr, u8 value)
 {
-#ifdef CONFIG_ACPI_EC
+#ifdef CONFIG_ACPI
         if (SONYPI_ACPI_ACTIVE)
                 return ec_write(addr, value);
 #endif
@@ -539,7 +539,7 @@ static int sonypi_ec_write(u8 addr, u8 value)
 
 static int sonypi_ec_read(u8 addr, u8 *value)
 {
-#ifdef CONFIG_ACPI_EC
+#ifdef CONFIG_ACPI
         if (SONYPI_ACPI_ACTIVE)
                 return ec_read(addr, value);
 #endif
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index 242fd46fda22..a16b94f12eb2 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -72,7 +72,7 @@
 /*
  * There is a bunch of documentation about the card, jumpers, config
  * settings, restrictions, cables, device names and numbers in
- * Documentation/specialix.txt
+ * Documentation/serial/specialix.txt
  */
 
 #include <linux/module.h>
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 5bed73329ef8..8504a2108557 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -65,12 +65,14 @@ static void cpuidle_idle_call(void)
                 return;
         }
 
+#if 0
+        /* shows regressions, re-enable for 2.6.29 */
         /*
          * run any timers that can be run now, at this point
          * before calculating the idle duration etc.
          */
         hrtimer_peek_ahead_timers();
-
+#endif
         /* ask the governor for the next state */
         next_state = cpuidle_curr_governor->select(dev);
         if (need_resched())
diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c
index ec249d2db633..d883e1b8bb8c 100644
--- a/drivers/dca/dca-core.c
+++ b/drivers/dca/dca-core.c
@@ -270,6 +270,6 @@ static void __exit dca_exit(void)
         dca_sysfs_exit();
 }
 
-module_init(dca_init);
+subsys_initcall(dca_init);
 module_exit(dca_exit);
 
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index dc003a3a787d..5317e08221ec 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -399,8 +399,8 @@ int dma_async_device_register(struct dma_device *device)
                 chan->chan_id = chancnt++;
                 chan->dev.class = &dma_devclass;
                 chan->dev.parent = device->dev;
-                snprintf(chan->dev.bus_id, BUS_ID_SIZE, "dma%dchan%d",
-                         device->dev_id, chan->chan_id);
+                dev_set_name(&chan->dev, "dma%dchan%d",
+                             device->dev_id, chan->chan_id);
 
                 rc = device_register(&chan->dev);
                 if (rc) {
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index d1e381e35a9e..ed9636bfb54a 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -20,11 +20,11 @@ static unsigned int test_buf_size = 16384;
 module_param(test_buf_size, uint, S_IRUGO);
 MODULE_PARM_DESC(test_buf_size, "Size of the memcpy test buffer");
 
-static char test_channel[BUS_ID_SIZE];
+static char test_channel[20];
 module_param_string(channel, test_channel, sizeof(test_channel), S_IRUGO);
 MODULE_PARM_DESC(channel, "Bus ID of the channel to test (default: any)");
 
-static char test_device[BUS_ID_SIZE];
+static char test_device[20];
 module_param_string(device, test_device, sizeof(test_device), S_IRUGO);
 MODULE_PARM_DESC(device, "Bus ID of the DMA Engine to test (default: any)");
 
@@ -80,14 +80,14 @@ static bool dmatest_match_channel(struct dma_chan *chan)
 {
         if (test_channel[0] == '\0')
                 return true;
-        return strcmp(chan->dev.bus_id, test_channel) == 0;
+        return strcmp(dev_name(&chan->dev), test_channel) == 0;
 }
 
 static bool dmatest_match_device(struct dma_device *device)
 {
         if (test_device[0] == '\0')
                 return true;
-        return strcmp(device->dev->bus_id, test_device) == 0;
+        return strcmp(dev_name(device->dev), test_device) == 0;
 }
 
 static unsigned long dmatest_random(void)
@@ -332,7 +332,7 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan)
 
         dtc = kmalloc(sizeof(struct dmatest_chan), GFP_KERNEL);
         if (!dtc) {
-                pr_warning("dmatest: No memory for %s\n", chan->dev.bus_id);
+                pr_warning("dmatest: No memory for %s\n", dev_name(&chan->dev));
                 return DMA_NAK;
         }
 
@@ -343,16 +343,16 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan)
                 thread = kzalloc(sizeof(struct dmatest_thread), GFP_KERNEL);
                 if (!thread) {
                         pr_warning("dmatest: No memory for %s-test%u\n",
-                                        chan->dev.bus_id, i);
+                                   dev_name(&chan->dev), i);
                         break;
                 }
                 thread->chan = dtc->chan;
                 smp_wmb();
                 thread->task = kthread_run(dmatest_func, thread, "%s-test%u",
-                                chan->dev.bus_id, i);
+                                dev_name(&chan->dev), i);
                 if (IS_ERR(thread->task)) {
                         pr_warning("dmatest: Failed to run thread %s-test%u\n",
-                                        chan->dev.bus_id, i);
+                                        dev_name(&chan->dev), i);
                         kfree(thread);
                         break;
                 }
@@ -362,7 +362,7 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan)
                 list_add_tail(&thread->node, &dtc->threads);
         }
 
-        pr_info("dmatest: Started %u threads using %s\n", i, chan->dev.bus_id);
+        pr_info("dmatest: Started %u threads using %s\n", i, dev_name(&chan->dev));
 
         list_add_tail(&dtc->node, &dmatest_channels);
         nr_channels++;
@@ -379,7 +379,7 @@ static enum dma_state_client dmatest_remove_channel(struct dma_chan *chan)
                         list_del(&dtc->node);
                         dmatest_cleanup_channel(dtc);
                         pr_debug("dmatest: lost channel %s\n",
-                                        chan->dev.bus_id);
+                                        dev_name(&chan->dev));
                         return DMA_ACK;
                 }
         }
@@ -418,7 +418,7 @@ dmatest_event(struct dma_client *client, struct dma_chan *chan,
 
         default:
                 pr_info("dmatest: Unhandled event %u (%s)\n",
-                                state, chan->dev.bus_id);
+                                state, dev_name(&chan->dev));
                 break;
         }
 
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index b0438c4f0c30..ecd743f7cc61 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -525,7 +525,7 @@ static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx)
         }
 
         hw->ctl = IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
-        if (new->async_tx.callback) {
+        if (first->async_tx.callback) {
                 hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN;
                 if (first != new) {
                         /* move callback into to last desc */
@@ -617,7 +617,7 @@ static dma_cookie_t ioat2_tx_submit(struct dma_async_tx_descriptor *tx)
         }
 
         hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
-        if (new->async_tx.callback) {
+        if (first->async_tx.callback) {
                 hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN;
                 if (first != new) {
                         /* move callback into to last desc */
@@ -807,6 +807,12 @@ static void ioat_dma_free_chan_resources(struct dma_chan *chan)
         struct ioat_desc_sw *desc, *_desc;
         int in_use_descs = 0;
 
+        /* Before freeing channel resources first check
+         * if they have been previously allocated for this channel.
+         */
+        if (ioat_chan->desccount == 0)
+                return;
+
         tasklet_disable(&ioat_chan->cleanup_task);
         ioat_dma_memcpy_cleanup(ioat_chan);
 
@@ -869,6 +875,7 @@ static void ioat_dma_free_chan_resources(struct dma_chan *chan)
         ioat_chan->last_completion = ioat_chan->completion_addr = 0;
         ioat_chan->pending = 0;
         ioat_chan->dmacount = 0;
+        ioat_chan->desccount = 0;
         ioat_chan->watchdog_completion = 0;
         ioat_chan->last_compl_desc_addr_hw = 0;
         ioat_chan->watchdog_tcp_cookie =
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 71fba82462cb..c7a9306d951d 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -411,6 +411,7 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx)
         int slot_cnt;
         int slots_per_op;
         dma_cookie_t cookie;
+        dma_addr_t next_dma;
 
         grp_start = sw_desc->group_head;
         slot_cnt = grp_start->slot_cnt;
@@ -425,12 +426,12 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx)
                          &old_chain_tail->chain_node);
 
         /* fix up the hardware chain */
-        iop_desc_set_next_desc(old_chain_tail, grp_start->async_tx.phys);
+        next_dma = grp_start->async_tx.phys;
+        iop_desc_set_next_desc(old_chain_tail, next_dma);
+        BUG_ON(iop_desc_get_next_desc(old_chain_tail) != next_dma); /* flush */
 
-        /* 1/ don't add pre-chained descriptors
-         * 2/ dummy read to flush next_desc write
-         */
-        BUG_ON(iop_desc_get_next_desc(sw_desc));
+        /* check for pre-chained descriptors */
+        iop_paranoia(iop_desc_get_next_desc(sw_desc));
 
         /* increment the pending count by the number of slots
          * memcpy operations have a 1:1 (slot:operation) relation
diff --git a/drivers/dma/iovlock.c b/drivers/dma/iovlock.c
index e763d723e4cf..9f6fe46a9b87 100644
--- a/drivers/dma/iovlock.c
+++ b/drivers/dma/iovlock.c
@@ -55,7 +55,6 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len)
         int nr_iovecs = 0;
         int iovec_len_used = 0;
         int iovec_pages_used = 0;
-        long err;
 
         /* don't pin down non-user-based iovecs */
         if (segment_eq(get_fs(), KERNEL_DS))
@@ -72,23 +71,21 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len)
         local_list = kmalloc(sizeof(*local_list)
                 + (nr_iovecs * sizeof (struct dma_page_list))
                 + (iovec_pages_used * sizeof (struct page*)), GFP_KERNEL);
-        if (!local_list) {
-                err = -ENOMEM;
+        if (!local_list)
                 goto out;
-        }
 
         /* list of pages starts right after the page list array */
         pages = (struct page **) &local_list->page_list[nr_iovecs];
 
+        local_list->nr_iovecs = 0;
+
         for (i = 0; i < nr_iovecs; i++) {
                 struct dma_page_list *page_list = &local_list->page_list[i];
 
                 len -= iov[i].iov_len;
 
-                if (!access_ok(VERIFY_WRITE, iov[i].iov_base, iov[i].iov_len)) {
-                        err = -EFAULT;
+                if (!access_ok(VERIFY_WRITE, iov[i].iov_base, iov[i].iov_len))
                         goto unpin;
-                }
 
                 page_list->nr_pages = num_pages_spanned(&iov[i]);
                 page_list->base_address = iov[i].iov_base;
@@ -109,10 +106,8 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len)
                         NULL);
                 up_read(&current->mm->mmap_sem);
 
-                if (ret != page_list->nr_pages) {
-                        err = -ENOMEM;
+                if (ret != page_list->nr_pages)
                         goto unpin;
-                }
 
                 local_list->nr_iovecs = i + 1;
         }
@@ -122,7 +117,7 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len)
 unpin:
         dma_unpin_iovec_pages(local_list);
 out:
-        return ERR_PTR(err);
+        return NULL;
 }
 
 void dma_unpin_iovec_pages(struct dma_pinned_list *pinned_list)
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index f0d9b415db50..d335086f4a26 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -1381,6 +1381,7 @@ static int i5000_probe1(struct pci_dev *pdev, int dev_idx)
         if (mci == NULL)
                 return -ENOMEM;
 
+        kobject_get(&mci->edac_mci_kobj);
         debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
 
         mci->dev = &pdev->dev;  /* record ptr  to the generic device */
@@ -1453,6 +1454,7 @@ fail1:
         i5000_put_devices(mci);
 
 fail0:
+        kobject_put(&mci->edac_mci_kobj);
         edac_mc_free(mci);
         return -ENODEV;
 }
@@ -1498,7 +1500,7 @@ static void __devexit i5000_remove_one(struct pci_dev *pdev)
 
         /* retrieve references to resources, and free those resources */
         i5000_put_devices(mci);
-
+        kobject_put(&mci->edac_mci_kobj);
         edac_mc_free(mci);
 }
 
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 7f2ee27fe76b..48f49d93d249 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -65,6 +65,14 @@ config GPIO_SYSFS
 
 # put expanders in the right section, in alphabetical order
 
+comment "Memory mapped GPIO expanders:"
+
+config GPIO_XILINX
+        bool "Xilinx GPIO support"
+        depends on PPC_OF
+        help
+          Say yes here to support the Xilinx FPGA GPIO device
+
 comment "I2C GPIO expanders:"
 
 config GPIO_MAX732X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 6aafdeb9ad03..49ac64e515e6 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -10,4 +10,5 @@ obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
 obj-$(CONFIG_GPIO_PCA953X)      += pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)      += pcf857x.o
 obj-$(CONFIG_GPIO_TWL4030)      += twl4030-gpio.o
+obj-$(CONFIG_GPIO_XILINX)       += xilinx_gpio.o
 obj-$(CONFIG_GPIO_BT8XX)        += bt8xxgpio.o
diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c
new file mode 100644
index 000000000000..3c1177abebd3
--- /dev/null
+++ b/drivers/gpio/xilinx_gpio.c
@@ -0,0 +1,235 @@
+/*
+ * Xilinx gpio driver
+ *
+ * Copyright 2008 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+/* Register Offset Definitions */
+#define XGPIO_DATA_OFFSET   (0x0)       /* Data register  */
+#define XGPIO_TRI_OFFSET    (0x4)       /* I/O direction register  */
+
+struct xgpio_instance {
+        struct of_mm_gpio_chip mmchip;
+        u32 gpio_state;         /* GPIO state shadow register */
+        u32 gpio_dir;           /* GPIO direction shadow register */
+        spinlock_t gpio_lock;   /* Lock used for synchronization */
+};
+
+/**
+ * xgpio_get - Read the specified signal of the GPIO device.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ *
+ * This function reads the specified signal of the GPIO device. It returns 0 if
+ * the signal clear, 1 if signal is set or negative value on error.
+ */
+static int xgpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+
+        return (in_be32(mm_gc->regs + XGPIO_DATA_OFFSET) >> gpio) & 1;
+}
+
+/**
+ * xgpio_set - Write the specified signal of the GPIO device.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ * @val:    Value to be written to specified signal.
+ *
+ * This function writes the specified value in to the specified signal of the
+ * GPIO device.
+ */
+static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+        unsigned long flags;
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct xgpio_instance *chip =
+            container_of(mm_gc, struct xgpio_instance, mmchip);
+
+        spin_lock_irqsave(&chip->gpio_lock, flags);
+
+        /* Write to GPIO signal and set its direction to output */
+        if (val)
+                chip->gpio_state |= 1 << gpio;
+        else
+                chip->gpio_state &= ~(1 << gpio);
+        out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state);
+
+        spin_unlock_irqrestore(&chip->gpio_lock, flags);
+}
+
+/**
+ * xgpio_dir_in - Set the direction of the specified GPIO signal as input.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ *
+ * This function sets the direction of specified GPIO signal as input.
+ * It returns 0 if direction of GPIO signals is set as input otherwise it
+ * returns negative error value.
+ */
+static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+        unsigned long flags;
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct xgpio_instance *chip =
+            container_of(mm_gc, struct xgpio_instance, mmchip);
+
+        spin_lock_irqsave(&chip->gpio_lock, flags);
+
+        /* Set the GPIO bit in shadow register and set direction as input */
+        chip->gpio_dir |= (1 << gpio);
+        out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir);
+
+        spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+        return 0;
+}
+
+/**
+ * xgpio_dir_out - Set the direction of the specified GPIO signal as output.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ * @val:    Value to be written to specified signal.
+ *
+ * This function sets the direction of specified GPIO signal as output. If all
+ * GPIO signals of GPIO chip is configured as input then it returns
+ * error otherwise it returns 0.
+ */
+static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+        unsigned long flags;
+        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+        struct xgpio_instance *chip =
+            container_of(mm_gc, struct xgpio_instance, mmchip);
+
+        spin_lock_irqsave(&chip->gpio_lock, flags);
+
+        /* Write state of GPIO signal */
+        if (val)
+                chip->gpio_state |= 1 << gpio;
+        else
+                chip->gpio_state &= ~(1 << gpio);
+        out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state);
+
+        /* Clear the GPIO bit in shadow register and set direction as output */
+        chip->gpio_dir &= (~(1 << gpio));
+        out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir);
+
+        spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+        return 0;
+}
+
+/**
+ * xgpio_save_regs - Set initial values of GPIO pins
+ * @mm_gc: pointer to memory mapped GPIO chip structure
+ */
+static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+        struct xgpio_instance *chip =
+            container_of(mm_gc, struct xgpio_instance, mmchip);
+
+        out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state);
+        out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir);
+}
+
+/**
+ * xgpio_of_probe - Probe method for the GPIO device.
+ * @np: pointer to device tree node
+ *
+ * This function probes the GPIO device in the device tree. It initializes the
+ * driver data structure. It returns 0, if the driver is bound to the GPIO
+ * device, or a negative value if there is an error.
+ */
+static int __devinit xgpio_of_probe(struct device_node *np)
+{
+        struct xgpio_instance *chip;
+        struct of_gpio_chip *ofchip;
+        int status = 0;
+        const u32 *tree_info;
+
+        chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+        if (!chip)
+                return -ENOMEM;
+        ofchip = &chip->mmchip.of_gc;
+
+        /* Update GPIO state shadow register with default value */
+        tree_info = of_get_property(np, "xlnx,dout-default", NULL);
+        if (tree_info)
+                chip->gpio_state = *tree_info;
+
+        /* Update GPIO direction shadow register with default value */
+        chip->gpio_dir = 0xFFFFFFFF; /* By default, all pins are inputs */
+        tree_info = of_get_property(np, "xlnx,tri-default", NULL);
+        if (tree_info)
+                chip->gpio_dir = *tree_info;
+
+        /* Check device node and parent device node for device width */
+        ofchip->gc.ngpio = 32; /* By default assume full GPIO controller */
+        tree_info = of_get_property(np, "xlnx,gpio-width", NULL);
+        if (!tree_info)
+                tree_info = of_get_property(np->parent,
+                                            "xlnx,gpio-width", NULL);
+        if (tree_info)
+                ofchip->gc.ngpio = *tree_info;
+
+        spin_lock_init(&chip->gpio_lock);
+
+        ofchip->gpio_cells = 2;
+        ofchip->gc.direction_input = xgpio_dir_in;
+        ofchip->gc.direction_output = xgpio_dir_out;
+        ofchip->gc.get = xgpio_get;
+        ofchip->gc.set = xgpio_set;
+
+        chip->mmchip.save_regs = xgpio_save_regs;
+
+        /* Call the OF gpio helper to setup and register the GPIO device */
+        status = of_mm_gpiochip_add(np, &chip->mmchip);
+        if (status) {
+                kfree(chip);
+                pr_err("%s: error in probe function with status %d\n",
+                       np->full_name, status);
+                return status;
+        }
+        pr_info("XGpio: %s: registered\n", np->full_name);
+        return 0;
+}
+
+static struct of_device_id xgpio_of_match[] __devinitdata = {
+        { .compatible = "xlnx,xps-gpio-1.00.a", },
+        { /* end of list */ },
+};
+
+static int __init xgpio_init(void)
+{
+        struct device_node *np;
+
+        for_each_matching_node(np, xgpio_of_match)
+                xgpio_of_probe(np);
+
+        return 0;
+}
+
+/* Make sure we get initialized before anyone else tries to use us */
+subsys_initcall(xgpio_init);
+/* No exit call at the moment as we cannot unregister of GPIO chips */
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Xilinx GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 96f416afc3f6..3ab1e9cc4692 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -266,11 +266,19 @@ int drm_init(struct drm_driver *driver)
         for (i = 0; driver->pci_driver.id_table[i].vendor != 0; i++) {
                 pid = (struct pci_device_id *)&driver->pci_driver.id_table[i];
 
+                /* Loop around setting up a DRM device for each PCI device
+                 * matching our ID and device class.  If we had the internal
+                 * function that pci_get_subsys and pci_get_class used, we'd
+                 * be able to just pass pid in instead of doing a two-stage
+                 * thing.
+                 */
                 pdev = NULL;
-                /* pass back in pdev to account for multiple identical cards */
                 while ((pdev =
                         pci_get_subsys(pid->vendor, pid->device, pid->subvendor,
                                        pid->subdevice, pdev)) != NULL) {
+                        if ((pdev->class & pid->class_mask) != pid->class)
+                                continue;
+
                         /* stealth mode requires a manual probe */
                         pci_dev_get(pdev);
                         drm_get_dev(pdev, pid, driver);
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 212a94f715b2..15c8dabc3e97 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -280,8 +280,6 @@ int drm_irq_uninstall(struct drm_device * dev)
 
         drm_vblank_cleanup(dev);
 
-        dev->locked_tasklet_func = NULL;
-
         return 0;
 }
 EXPORT_SYMBOL(drm_irq_uninstall);
@@ -699,81 +697,3 @@ void drm_handle_vblank(struct drm_device *dev, int crtc)
         drm_vbl_send_signals(dev, crtc);
 }
 EXPORT_SYMBOL(drm_handle_vblank);
-
-/**
- * Tasklet wrapper function.
- *
- * \param data DRM device in disguise.
- *
- * Attempts to grab the HW lock and calls the driver callback on success. On
- * failure, leave the lock marked as contended so the callback can be called
- * from drm_unlock().
- */
-static void drm_locked_tasklet_func(unsigned long data)
-{
-        struct drm_device *dev = (struct drm_device *)data;
-        unsigned long irqflags;
-        void (*tasklet_func)(struct drm_device *);
-        
-        spin_lock_irqsave(&dev->tasklet_lock, irqflags);
-        tasklet_func = dev->locked_tasklet_func;
-        spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
-
-        if (!tasklet_func ||
-            !drm_lock_take(&dev->lock,
-                           DRM_KERNEL_CONTEXT)) {
-                return;
-        }
-
-        dev->lock.lock_time = jiffies;
-        atomic_inc(&dev->counts[_DRM_STAT_LOCKS]);
-
-        spin_lock_irqsave(&dev->tasklet_lock, irqflags);
-        tasklet_func = dev->locked_tasklet_func;
-        dev->locked_tasklet_func = NULL;
-        spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
-        
-        if (tasklet_func != NULL)
-                tasklet_func(dev);
-
-        drm_lock_free(&dev->lock,
-                      DRM_KERNEL_CONTEXT);
-}
-
-/**
- * Schedule a tasklet to call back a driver hook with the HW lock held.
- *
- * \param dev DRM device.
- * \param func Driver callback.
- *
- * This is intended for triggering actions that require the HW lock from an
- * interrupt handler. The lock will be grabbed ASAP after the interrupt handler
- * completes. Note that the callback may be called from interrupt or process
- * context, it must not make any assumptions about this. Also, the HW lock will
- * be held with the kernel context or any client context.
- */
-void drm_locked_tasklet(struct drm_device *dev, void (*func)(struct drm_device *))
-{
-        unsigned long irqflags;
-        static DECLARE_TASKLET(drm_tasklet, drm_locked_tasklet_func, 0);
-
-        if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ) ||
-            test_bit(TASKLET_STATE_SCHED, &drm_tasklet.state))
-                return;
-
-        spin_lock_irqsave(&dev->tasklet_lock, irqflags);
-
-        if (dev->locked_tasklet_func) {
-                spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
-                return;
-        }
-
-        dev->locked_tasklet_func = func;
-
-        spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
-
-        drm_tasklet.data = (unsigned long)dev;
-
-        tasklet_hi_schedule(&drm_tasklet);
-}
-EXPORT_SYMBOL(drm_locked_tasklet);
diff --git a/drivers/gpu/drm/drm_lock.c b/drivers/gpu/drm/drm_lock.c
index 888159e03d26..1cfa72031f8f 100644
--- a/drivers/gpu/drm/drm_lock.c
+++ b/drivers/gpu/drm/drm_lock.c
@@ -154,8 +154,6 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv)
 int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv)
 {
         struct drm_lock *lock = data;
-        unsigned long irqflags;
-        void (*tasklet_func)(struct drm_device *);
 
         if (lock->context == DRM_KERNEL_CONTEXT) {
                 DRM_ERROR("Process %d using kernel context %d\n",
@@ -163,13 +161,6 @@ int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv)
                 return -EINVAL;
         }
 
-        spin_lock_irqsave(&dev->tasklet_lock, irqflags);
-        tasklet_func = dev->locked_tasklet_func;
-        dev->locked_tasklet_func = NULL;
-        spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
-        if (tasklet_func != NULL)
-                tasklet_func(dev);
-
         atomic_inc(&dev->counts[_DRM_STAT_UNLOCKS]);
 
         /* kernel_context_switch isn't used by any of the x86 drm
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index 141e33004a76..66c96ec66672 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -92,7 +92,6 @@ static int drm_fill_in_dev(struct drm_device * dev, struct pci_dev *pdev,
 
         spin_lock_init(&dev->count_lock);
         spin_lock_init(&dev->drw_lock);
-        spin_lock_init(&dev->tasklet_lock);
         spin_lock_init(&dev->lock.spinlock);
         init_timer(&dev->timer);
         mutex_init(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 256e22963ae4..0d215e38606a 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -154,6 +154,9 @@ static int i915_dma_cleanup(struct drm_device * dev)
         if (I915_NEED_GFX_HWS(dev))
                 i915_free_hws(dev);
 
+        dev_priv->sarea = NULL;
+        dev_priv->sarea_priv = NULL;
+
         return 0;
 }
 
@@ -442,7 +445,7 @@ static void i915_emit_breadcrumb(struct drm_device *dev)
 
         BEGIN_LP_RING(4);
         OUT_RING(MI_STORE_DWORD_INDEX);
-        OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT);
+        OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
         OUT_RING(dev_priv->counter);
         OUT_RING(0);
         ADVANCE_LP_RING();
@@ -573,7 +576,7 @@ static int i915_dispatch_flip(struct drm_device * dev)
 
         BEGIN_LP_RING(4);
         OUT_RING(MI_STORE_DWORD_INDEX);
-        OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT);
+        OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
         OUT_RING(dev_priv->counter);
         OUT_RING(0);
         ADVANCE_LP_RING();
@@ -608,7 +611,6 @@ static int i915_batchbuffer(struct drm_device *dev, void *data,
                             struct drm_file *file_priv)
 {
         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-        u32 *hw_status = dev_priv->hw_status_page;
         drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
             dev_priv->sarea_priv;
         drm_i915_batchbuffer_t *batch = data;
@@ -634,7 +636,7 @@ static int i915_batchbuffer(struct drm_device *dev, void *data,
         mutex_unlock(&dev->struct_mutex);
 
         if (sarea_priv)
-                sarea_priv->last_dispatch = (int)hw_status[5];
+                sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
         return ret;
 }
 
@@ -642,7 +644,6 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data,
                           struct drm_file *file_priv)
 {
         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-        u32 *hw_status = dev_priv->hw_status_page;
         drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
             dev_priv->sarea_priv;
         drm_i915_cmdbuffer_t *cmdbuf = data;
@@ -670,7 +671,7 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data,
         }
 
         if (sarea_priv)
-                sarea_priv->last_dispatch = (int)hw_status[5];
+                sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
         return 0;
 }
 
@@ -849,8 +850,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
          * be lost or delayed
          */
         if (!IS_I945G(dev) && !IS_I945GM(dev) && !IS_I965GM(dev))
-                if (pci_enable_msi(dev->pdev))
-                        DRM_ERROR("failed to enable MSI\n");
+                pci_enable_msi(dev->pdev);
 
         intel_opregion_init(dev);
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 572dcd0e3e0d..ef1c0b8f8d07 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -88,13 +88,6 @@ struct mem_block {
         struct drm_file *file_priv; /* NULL: free, -1: heap, other: real files */
 };
 
-typedef struct _drm_i915_vbl_swap {
-        struct list_head head;
-        drm_drawable_t drw_id;
-        unsigned int pipe;
-        unsigned int sequence;
-} drm_i915_vbl_swap_t;
-
 struct opregion_header;
 struct opregion_acpi;
 struct opregion_swsci;
@@ -146,10 +139,6 @@ typedef struct drm_i915_private {
         unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
         int vblank_pipe;
 
-        spinlock_t swaps_lock;
-        drm_i915_vbl_swap_t vbl_swaps;
-        unsigned int swaps_pending;
-
         struct intel_opregion opregion;
 
         /* Register state */
@@ -157,6 +146,7 @@ typedef struct drm_i915_private {
         u32 saveDSPACNTR;
         u32 saveDSPBCNTR;
         u32 saveDSPARB;
+        u32 saveRENDERSTANDBY;
         u32 savePIPEACONF;
         u32 savePIPEBCONF;
         u32 savePIPEASRC;
@@ -241,9 +231,6 @@ typedef struct drm_i915_private {
         u8 saveDACDATA[256*3]; /* 256 3-byte colors */
         u8 saveCR[37];
 
-        /** Work task for vblank-related ring access */
-        struct work_struct vblank_work;
-
         struct {
                 struct drm_mm gtt_space;
 
@@ -444,7 +431,6 @@ extern int i915_irq_wait(struct drm_device *dev, void *data,
 void i915_user_irq_get(struct drm_device *dev);
 void i915_user_irq_put(struct drm_device *dev);
 
-extern void i915_vblank_work_handler(struct work_struct *work);
 extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS);
 extern void i915_driver_irq_preinstall(struct drm_device * dev);
 extern int i915_driver_irq_postinstall(struct drm_device *dev);
@@ -622,8 +608,9 @@ static inline void opregion_enable_asle(struct drm_device *dev) { return; }
  * The area from dword 0x20 to 0x3ff is available for driver usage.
  */
 #define READ_HWSP(dev_priv, reg)  (((volatile u32*)(dev_priv->hw_status_page))[reg])
-#define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, 5)
+#define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, I915_BREADCRUMB_INDEX)
 #define I915_GEM_HWS_INDEX              0x20
+#define I915_BREADCRUMB_INDEX           0x21
 
 extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index b0ec73fa6a93..6b4a2bd20640 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1455,11 +1455,9 @@ i915_gem_object_set_domain_range(struct drm_gem_object *obj,
                                                   read_domains, write_domain);
 
         /* Wait on any GPU rendering to the object to be flushed. */
-        if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) {
-                ret = i915_gem_object_wait_rendering(obj);
-                if (ret)
-                        return ret;
-        }
+        ret = i915_gem_object_wait_rendering(obj);
+        if (ret)
+                return ret;
 
         if (obj_priv->page_cpu_valid == NULL) {
                 obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE,
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 26f48932a51e..82752d6177a4 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -80,211 +80,6 @@ i915_pipe_enabled(struct drm_device *dev, int pipe)
         return 0;
 }
 
-/**
- * Emit blits for scheduled buffer swaps.
- *
- * This function will be called with the HW lock held.
- * Because this function must grab the ring mutex (dev->struct_mutex),
- * it can no longer run at soft irq time. We'll fix this when we do
- * the DRI2 swap buffer work.
- */
-static void i915_vblank_tasklet(struct drm_device *dev)
-{
-        drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-        unsigned long irqflags;
-        struct list_head *list, *tmp, hits, *hit;
-        int nhits, nrects, slice[2], upper[2], lower[2], i;
-        unsigned counter[2];
-        struct drm_drawable_info *drw;
-        drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv;
-        u32 cpp = dev_priv->cpp;
-        u32 cmd = (cpp == 4) ? (XY_SRC_COPY_BLT_CMD |
-                                XY_SRC_COPY_BLT_WRITE_ALPHA |
-                                XY_SRC_COPY_BLT_WRITE_RGB)
-                             : XY_SRC_COPY_BLT_CMD;
-        u32 src_pitch = sarea_priv->pitch * cpp;
-        u32 dst_pitch = sarea_priv->pitch * cpp;
-        u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24);
-        RING_LOCALS;
-
-        mutex_lock(&dev->struct_mutex);
-
-        if (IS_I965G(dev) && sarea_priv->front_tiled) {
-                cmd |= XY_SRC_COPY_BLT_DST_TILED;
-                dst_pitch >>= 2;
-        }
-        if (IS_I965G(dev) && sarea_priv->back_tiled) {
-                cmd |= XY_SRC_COPY_BLT_SRC_TILED;
-                src_pitch >>= 2;
-        }
-
-        counter[0] = drm_vblank_count(dev, 0);
-        counter[1] = drm_vblank_count(dev, 1);
-
-        DRM_DEBUG("\n");
-
-        INIT_LIST_HEAD(&hits);
-
-        nhits = nrects = 0;
-
-        spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
-
-        /* Find buffer swaps scheduled for this vertical blank */
-        list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) {
-                drm_i915_vbl_swap_t *vbl_swap =
-                        list_entry(list, drm_i915_vbl_swap_t, head);
-                int pipe = vbl_swap->pipe;
-
-                if ((counter[pipe] - vbl_swap->sequence) > (1<<23))
-                        continue;
-
-                list_del(list);
-                dev_priv->swaps_pending--;
-                drm_vblank_put(dev, pipe);
-
-                spin_unlock(&dev_priv->swaps_lock);
-                spin_lock(&dev->drw_lock);
-
-                drw = drm_get_drawable_info(dev, vbl_swap->drw_id);
-
-                list_for_each(hit, &hits) {
-                        drm_i915_vbl_swap_t *swap_cmp =
-                                list_entry(hit, drm_i915_vbl_swap_t, head);
-                        struct drm_drawable_info *drw_cmp =
-                                drm_get_drawable_info(dev, swap_cmp->drw_id);
-
-                        /* Make sure both drawables are still
-                         * around and have some rectangles before
-                         * we look inside to order them for the
-                         * blts below.
-                         */
-                        if (drw_cmp && drw_cmp->num_rects > 0 &&
-                            drw && drw->num_rects > 0 &&
-                            drw_cmp->rects[0].y1 > drw->rects[0].y1) {
-                                list_add_tail(list, hit);
-                                break;
-                        }
-                }
-
-                spin_unlock(&dev->drw_lock);
-
-                /* List of hits was empty, or we reached the end of it */
-                if (hit == &hits)
-                        list_add_tail(list, hits.prev);
-
-                nhits++;
-
-                spin_lock(&dev_priv->swaps_lock);
-        }
-
-        if (nhits == 0) {
-                spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
-                mutex_unlock(&dev->struct_mutex);
-                return;
-        }
-
-        spin_unlock(&dev_priv->swaps_lock);
-
-        i915_kernel_lost_context(dev);
-
-        if (IS_I965G(dev)) {
-                BEGIN_LP_RING(4);
-
-                OUT_RING(GFX_OP_DRAWRECT_INFO_I965);
-                OUT_RING(0);
-                OUT_RING(((sarea_priv->width - 1) & 0xffff) | ((sarea_priv->height - 1) << 16));
-                OUT_RING(0);
-                ADVANCE_LP_RING();
-        } else {
-                BEGIN_LP_RING(6);
-
-                OUT_RING(GFX_OP_DRAWRECT_INFO);
-                OUT_RING(0);
-                OUT_RING(0);
-                OUT_RING(sarea_priv->width | sarea_priv->height << 16);
-                OUT_RING(sarea_priv->width | sarea_priv->height << 16);
-                OUT_RING(0);
-
-                ADVANCE_LP_RING();
-        }
-
-        sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT;
-
-        upper[0] = upper[1] = 0;
-        slice[0] = max(sarea_priv->pipeA_h / nhits, 1);
-        slice[1] = max(sarea_priv->pipeB_h / nhits, 1);
-        lower[0] = sarea_priv->pipeA_y + slice[0];
-        lower[1] = sarea_priv->pipeB_y + slice[0];
-
-        spin_lock(&dev->drw_lock);
-
-        /* Emit blits for buffer swaps, partitioning both outputs into as many
-         * slices as there are buffer swaps scheduled in order to avoid tearing
-         * (based on the assumption that a single buffer swap would always
-         * complete before scanout starts).
-         */
-        for (i = 0; i++ < nhits;
-             upper[0] = lower[0], lower[0] += slice[0],
-             upper[1] = lower[1], lower[1] += slice[1]) {
-                if (i == nhits)
-                        lower[0] = lower[1] = sarea_priv->height;
-
-                list_for_each(hit, &hits) {
-                        drm_i915_vbl_swap_t *swap_hit =
-                                list_entry(hit, drm_i915_vbl_swap_t, head);
-                        struct drm_clip_rect *rect;
-                        int num_rects, pipe;
-                        unsigned short top, bottom;
-
-                        drw = drm_get_drawable_info(dev, swap_hit->drw_id);
-
-                        /* The drawable may have been destroyed since
-                         * the vblank swap was queued
-                         */
-                        if (!drw)
-                                continue;
-
-                        rect = drw->rects;
-                        pipe = swap_hit->pipe;
-                        top = upper[pipe];
-                        bottom = lower[pipe];
-
-                        for (num_rects = drw->num_rects; num_rects--; rect++) {
-                                int y1 = max(rect->y1, top);
-                                int y2 = min(rect->y2, bottom);
-
-                                if (y1 >= y2)
-                                        continue;
-
-                                BEGIN_LP_RING(8);
-
-                                OUT_RING(cmd);
-                                OUT_RING(ropcpp | dst_pitch);
-                                OUT_RING((y1 << 16) | rect->x1);
-                                OUT_RING((y2 << 16) | rect->x2);
-                                OUT_RING(sarea_priv->front_offset);
-                                OUT_RING((y1 << 16) | rect->x1);
-                                OUT_RING(src_pitch);
-                                OUT_RING(sarea_priv->back_offset);
-
-                                ADVANCE_LP_RING();
-                        }
-                }
-        }
-
-        spin_unlock_irqrestore(&dev->drw_lock, irqflags);
-        mutex_unlock(&dev->struct_mutex);
-
-        list_for_each_safe(hit, tmp, &hits) {
-                drm_i915_vbl_swap_t *swap_hit =
-                        list_entry(hit, drm_i915_vbl_swap_t, head);
-
-                list_del(hit);
-
-                drm_free(swap_hit, sizeof(*swap_hit), DRM_MEM_DRIVER);
-        }
-}
-
 /* Called from drm generic code, passed a 'crtc', which
  * we use as a pipe index
  */
@@ -322,40 +117,6 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
         return count;
 }
 
-void
-i915_vblank_work_handler(struct work_struct *work)
-{
-        drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
-                                                    vblank_work);
-        struct drm_device *dev = dev_priv->dev;
-        unsigned long irqflags;
-
-        if (dev->lock.hw_lock == NULL) {
-                i915_vblank_tasklet(dev);
-                return;
-        }
-
-        spin_lock_irqsave(&dev->tasklet_lock, irqflags);
-        dev->locked_tasklet_func = i915_vblank_tasklet;
-        spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
-
-        /* Try to get the lock now, if this fails, the lock
-         * holder will execute the tasklet during unlock
-         */
-        if (!drm_lock_take(&dev->lock, DRM_KERNEL_CONTEXT))
-                return;
-
-        dev->lock.lock_time = jiffies;
-        atomic_inc(&dev->counts[_DRM_STAT_LOCKS]);
-
-        spin_lock_irqsave(&dev->tasklet_lock, irqflags);
-        dev->locked_tasklet_func = NULL;
-        spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
-
-        i915_vblank_tasklet(dev);
-        drm_lock_free(&dev->lock, DRM_KERNEL_CONTEXT);
-}
-
 irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 {
         struct drm_device *dev = (struct drm_device *) arg;
@@ -433,9 +194,6 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
         if (iir & I915_ASLE_INTERRUPT)
                 opregion_asle_intr(dev);
 
-        if (vblank && dev_priv->swaps_pending > 0)
-                schedule_work(&dev_priv->vblank_work);
-
         return IRQ_HANDLED;
 }
 
@@ -454,12 +212,10 @@ static int i915_emit_irq(struct drm_device * dev)
         if (dev_priv->sarea_priv)
                 dev_priv->sarea_priv->last_enqueue = dev_priv->counter;
 
-        BEGIN_LP_RING(6);
+        BEGIN_LP_RING(4);
         OUT_RING(MI_STORE_DWORD_INDEX);
-        OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT);
+        OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
         OUT_RING(dev_priv->counter);
-        OUT_RING(0);
-        OUT_RING(0);
         OUT_RING(MI_USER_INTERRUPT);
         ADVANCE_LP_RING();
 
@@ -696,123 +452,21 @@ int i915_vblank_pipe_get(struct drm_device *dev, void *data,
 int i915_vblank_swap(struct drm_device *dev, void *data,
                      struct drm_file *file_priv)
 {
-        drm_i915_private_t *dev_priv = dev->dev_private;
-        drm_i915_vblank_swap_t *swap = data;
-        drm_i915_vbl_swap_t *vbl_swap, *vbl_old;
-        unsigned int pipe, seqtype, curseq;
-        unsigned long irqflags;
-        struct list_head *list;
-        int ret;
-
-        if (!dev_priv || !dev_priv->sarea_priv) {
-                DRM_ERROR("%s called with no initialization\n", __func__);
-                return -EINVAL;
-        }
-
-        if (dev_priv->sarea_priv->rotation) {
-                DRM_DEBUG("Rotation not supported\n");
-                return -EINVAL;
-        }
-
-        if (swap->seqtype & ~(_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE |
-                             _DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS)) {
-                DRM_ERROR("Invalid sequence type 0x%x\n", swap->seqtype);
-                return -EINVAL;
-        }
-
-        pipe = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0;
-
-        seqtype = swap->seqtype & (_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE);
-
-        if (!(dev_priv->vblank_pipe & (1 << pipe))) {
-                DRM_ERROR("Invalid pipe %d\n", pipe);
-                return -EINVAL;
-        }
-
-        spin_lock_irqsave(&dev->drw_lock, irqflags);
-
-        if (!drm_get_drawable_info(dev, swap->drawable)) {
-                spin_unlock_irqrestore(&dev->drw_lock, irqflags);
-                DRM_DEBUG("Invalid drawable ID %d\n", swap->drawable);
-                return -EINVAL;
-        }
-
-        spin_unlock_irqrestore(&dev->drw_lock, irqflags);
-
-        /*
-         * We take the ref here and put it when the swap actually completes
-         * in the tasklet.
+        /* The delayed swap mechanism was fundamentally racy, and has been
+         * removed.  The model was that the client requested a delayed flip/swap
+         * from the kernel, then waited for vblank before continuing to perform
+         * rendering.  The problem was that the kernel might wake the client
+         * up before it dispatched the vblank swap (since the lock has to be
+         * held while touching the ringbuffer), in which case the client would
+         * clear and start the next frame before the swap occurred, and
+         * flicker would occur in addition to likely missing the vblank.
+         *
+         * In the absence of this ioctl, userland falls back to a correct path
+         * of waiting for a vblank, then dispatching the swap on its own.
+         * Context switching to userland and back is plenty fast enough for
+         * meeting the requirements of vblank swapping.
          */
-        ret = drm_vblank_get(dev, pipe);
-        if (ret)
-                return ret;
-        curseq = drm_vblank_count(dev, pipe);
-
-        if (seqtype == _DRM_VBLANK_RELATIVE)
-                swap->sequence += curseq;
-
-        if ((curseq - swap->sequence) <= (1<<23)) {
-                if (swap->seqtype & _DRM_VBLANK_NEXTONMISS) {
-                        swap->sequence = curseq + 1;
-                } else {
-                        DRM_DEBUG("Missed target sequence\n");
-                        drm_vblank_put(dev, pipe);
-                        return -EINVAL;
-                }
-        }
-
-        vbl_swap = drm_calloc(1, sizeof(*vbl_swap), DRM_MEM_DRIVER);
-
-        if (!vbl_swap) {
-                DRM_ERROR("Failed to allocate memory to queue swap\n");
-                drm_vblank_put(dev, pipe);
-                return -ENOMEM;
-        }
-
-        vbl_swap->drw_id = swap->drawable;
-        vbl_swap->pipe = pipe;
-        vbl_swap->sequence = swap->sequence;
-
-        spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
-
-        list_for_each(list, &dev_priv->vbl_swaps.head) {
-                vbl_old = list_entry(list, drm_i915_vbl_swap_t, head);
-
-                if (vbl_old->drw_id == swap->drawable &&
-                    vbl_old->pipe == pipe &&
-                    vbl_old->sequence == swap->sequence) {
-                        spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
-                        drm_vblank_put(dev, pipe);
-                        drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
-                        DRM_DEBUG("Already scheduled\n");
-                        return 0;
-                }
-        }
-
-        if (dev_priv->swaps_pending >= 10) {
-                DRM_DEBUG("Too many swaps queued\n");
-                DRM_DEBUG(" pipe 0: %d pipe 1: %d\n",
-                          drm_vblank_count(dev, 0),
-                          drm_vblank_count(dev, 1));
-
-                list_for_each(list, &dev_priv->vbl_swaps.head) {
-                        vbl_old = list_entry(list, drm_i915_vbl_swap_t, head);
-                        DRM_DEBUG("\tdrw %x pipe %d seq %x\n",
-                                  vbl_old->drw_id, vbl_old->pipe,
-                                  vbl_old->sequence);
-                }
-                spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
-                drm_vblank_put(dev, pipe);
-                drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
-                return -EBUSY;
-        }
-
-        list_add_tail(&vbl_swap->head, &dev_priv->vbl_swaps.head);
-        dev_priv->swaps_pending++;
-
-        spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
-
-        return 0;
+        return -EINVAL;
 }
 
 /* drm_dma.h hooks
@@ -831,11 +485,6 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
         int ret, num_pipes = 2;
 
-        spin_lock_init(&dev_priv->swaps_lock);
-        INIT_LIST_HEAD(&dev_priv->vbl_swaps.head);
-        INIT_WORK(&dev_priv->vblank_work, i915_vblank_work_handler);
-        dev_priv->swaps_pending = 0;
-
         /* Set initial unmasked IRQs to just the selected vblank pipes. */
         dev_priv->irq_mask_reg = ~0;
 
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5c2d9f206d05..0e476eba36e6 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -527,6 +527,9 @@
 #define C0DRB3                  0x10206
 #define C1DRB3                  0x10606
 
+/** GM965 GM45 render standby register */
+#define MCHBAR_RENDER_STANDBY   0x111B8
+
 /*
  * Overlay regs
  */
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 603fe742ccd4..5ddc6e595c0c 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -240,6 +240,10 @@ int i915_save_state(struct drm_device *dev)
 
         pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
 
+        /* Render Standby */
+        if (IS_I965G(dev) && IS_MOBILE(dev))
+                dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
+
         /* Display arbitration control */
         dev_priv->saveDSPARB = I915_READ(DSPARB);
 
@@ -365,6 +369,11 @@ int i915_restore_state(struct drm_device *dev)
 
         pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
 
+        /* Render Standby */
+        if (IS_I965G(dev) && IS_MOBILE(dev))
+                I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
+
+        /* Display arbitration */
         I915_WRITE(DSPARB, dev_priv->saveDSPARB);
 
         /* Pipe & plane A info */
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index 073894824e6b..abdc1ae38467 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -1751,6 +1751,12 @@ int radeon_driver_load(struct drm_device *dev, unsigned long flags)
         else
                 dev_priv->flags |= RADEON_IS_PCI;
 
+        ret = drm_addmap(dev, drm_get_resource_start(dev, 2),
+                         drm_get_resource_len(dev, 2), _DRM_REGISTERS,
+                         _DRM_READ_ONLY | _DRM_DRIVER, &dev_priv->mmio);
+        if (ret != 0)
+                return ret;
+
         DRM_DEBUG("%s card detected\n",
                   ((dev_priv->flags & RADEON_IS_AGP) ? "AGP" : (((dev_priv->flags & RADEON_IS_PCIE) ? "PCIE" : "PCI"))));
         return ret;
@@ -1767,12 +1773,6 @@ int radeon_driver_firstopen(struct drm_device *dev)
 
         dev_priv->gart_info.table_size = RADEON_PCIGART_TABLE_SIZE;
 
-        ret = drm_addmap(dev, drm_get_resource_start(dev, 2),
-                         drm_get_resource_len(dev, 2), _DRM_REGISTERS,
-                         _DRM_READ_ONLY, &dev_priv->mmio);
-        if (ret != 0)
-                return ret;
-
         dev_priv->fb_aper_offset = drm_get_resource_start(dev, 0);
         ret = drm_addmap(dev, dev_priv->fb_aper_offset,
                          drm_get_resource_len(dev, 0), _DRM_FRAME_BUFFER,
@@ -1788,6 +1788,9 @@ int radeon_driver_unload(struct drm_device *dev)
         drm_radeon_private_t *dev_priv = dev->dev_private;
 
         DRM_DEBUG("\n");
+
+        drm_rmmap(dev, dev_priv->mmio);
+
         drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER);
 
         dev->dev_private = NULL;
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index 02f5575ba395..7a183789be97 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -287,7 +287,6 @@ typedef struct drm_radeon_private {
         unsigned long gart_textures_offset;
 
         drm_local_map_t *sarea;
-        drm_local_map_t *mmio;
         drm_local_map_t *cp_ring;
         drm_local_map_t *ring_rptr;
         drm_local_map_t *gart_textures;
@@ -318,6 +317,7 @@ typedef struct drm_radeon_private {
 
         int num_gb_pipes;
         int track_flush;
+        drm_local_map_t *mmio;
 } drm_radeon_private_t;
 
 typedef struct drm_radeon_buf_priv {
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index c6ab4ba60c52..9b97795e45ad 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -55,10 +55,11 @@ struct apple_key_translation {
 
 static struct apple_key_translation apple_fn_keys[] = {
         { KEY_BACKSPACE, KEY_DELETE },
+        { KEY_ENTER,    KEY_INSERT },
         { KEY_F1,       KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY },
         { KEY_F2,       KEY_BRIGHTNESSUP,   APPLE_FLAG_FKEY },
-        { KEY_F3,       KEY_FN_F5,          APPLE_FLAG_FKEY }, /* Exposé */
-        { KEY_F4,       KEY_FN_F4,          APPLE_FLAG_FKEY }, /* Dashboard */
+        { KEY_F3,       KEY_SCALE,          APPLE_FLAG_FKEY },
+        { KEY_F4,       KEY_DASHBOARD,      APPLE_FLAG_FKEY },
         { KEY_F5,       KEY_KBDILLUMDOWN,   APPLE_FLAG_FKEY },
         { KEY_F6,       KEY_KBDILLUMUP,     APPLE_FLAG_FKEY },
         { KEY_F7,       KEY_PREVIOUSSONG,   APPLE_FLAG_FKEY },
@@ -418,6 +419,12 @@ static const struct hid_device_id apple_devices[] = {
                 .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
         { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
                 .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+        { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
+                .driver_data = APPLE_HAS_FN },
+        { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
+                .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+        { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
+                .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
         { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY),
                 .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
         { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY),
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 1903e7515650..147ec591a806 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1250,9 +1250,11 @@ static const struct hid_device_id hid_blacklist[] = {
         { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) },
         { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) },
         { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) },
+        { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) },
+        { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) },
+        { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) },
         { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
         { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
-        { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
         { HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
         { HID_USB_DEVICE(USB_VENDOR_ID_BRIGHT, USB_DEVICE_ID_BRIGHT_ABNT2) },
         { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) },
@@ -1408,6 +1410,7 @@ static const struct hid_device_id hid_ignore_list[] = {
         { HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) },
         { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)},
         { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)},
+        { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
         { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
         { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
         { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) },
@@ -1485,6 +1488,7 @@ static const struct hid_device_id hid_ignore_list[] = {
         { HID_USB_DEVICE(USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1007) },
         { HID_USB_DEVICE(USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA) },
         { HID_USB_DEVICE(USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO) },
+        { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) },
         { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_GPEN_560) },
         { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) },
         { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) },
@@ -1572,6 +1576,9 @@ static const struct hid_device_id hid_mouse_ignore_list[] = {
         { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) },
         { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) },
         { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) },
+        { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) },
+        { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) },
+        { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) },
         { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
         { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
         { }
@@ -1729,7 +1736,7 @@ static int __init hid_init(void)
                 goto err_bus;
 
 #ifdef CONFIG_HID_COMPAT
-        hid_compat_wq = create_workqueue("hid_compat");
+        hid_compat_wq = create_singlethread_workqueue("hid_compat");
         if (!hid_compat_wq) {
                 hidraw_exit();
                 goto err;
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 5cc404291736..d70075dd3d81 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -82,6 +82,9 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI    0x0230
 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO     0x0231
 #define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS     0x0232
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI    0x0236
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO     0x0237
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS     0x0238
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY    0x030a
 #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY     0x030b
 #define USB_DEVICE_ID_APPLE_ATV_IRCONTROL       0x8241
@@ -253,6 +256,9 @@
 #define USB_VENDOR_ID_KBGEAR            0x084e
 #define USB_DEVICE_ID_KBGEAR_JAMSTUDIO  0x1001
 
+#define USB_VENDOR_ID_KWORLD            0x1b80
+#define USB_DEVICE_ID_KWORLD_RADIO_FM700        0xd700
+
 #define USB_VENDOR_ID_LABTEC            0x1020
 #define USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD  0x0006
 
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 894d52e05bf9..7685ae6808c4 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -38,7 +38,7 @@ static int hidraw_major;
 static struct cdev hidraw_cdev;
 static struct class *hidraw_class;
 static struct hidraw *hidraw_table[HIDRAW_MAX_DEVICES];
-static DEFINE_SPINLOCK(minors_lock);
+static DEFINE_MUTEX(minors_lock);
 
 static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
 {
@@ -159,13 +159,13 @@ static int hidraw_open(struct inode *inode, struct file *file)
         struct hidraw_list *list;
         int err = 0;
 
-        lock_kernel();
         if (!(list = kzalloc(sizeof(struct hidraw_list), GFP_KERNEL))) {
                 err = -ENOMEM;
                 goto out;
         }
 
-        spin_lock(&minors_lock);
+        lock_kernel();
+        mutex_lock(&minors_lock);
         if (!hidraw_table[minor]) {
                 printk(KERN_EMERG "hidraw device with minor %d doesn't exist\n",
                                 minor);
@@ -180,13 +180,16 @@ static int hidraw_open(struct inode *inode, struct file *file)
         file->private_data = list;
 
         dev = hidraw_table[minor];
-        if (!dev->open++)
-                dev->hid->ll_driver->open(dev->hid);
+        if (!dev->open++) {
+                err = dev->hid->ll_driver->open(dev->hid);
+                if (err < 0)
+                        dev->open--;
+        }
 
 out_unlock:
-        spin_unlock(&minors_lock);
-out:
+        mutex_unlock(&minors_lock);
         unlock_kernel();
+out:
         return err;
 
 }
@@ -310,7 +313,7 @@ int hidraw_connect(struct hid_device *hid)
 
         result = -EINVAL;
 
-        spin_lock(&minors_lock);
+        mutex_lock(&minors_lock);
 
         for (minor = 0; minor < HIDRAW_MAX_DEVICES; minor++) {
                 if (hidraw_table[minor])
@@ -320,9 +323,8 @@ int hidraw_connect(struct hid_device *hid)
                 break;
         }
 
-        spin_unlock(&minors_lock);
-
         if (result) {
+                mutex_unlock(&minors_lock);
                 kfree(dev);
                 goto out;
         }
@@ -331,14 +333,14 @@ int hidraw_connect(struct hid_device *hid)
                                  NULL, "%s%d", "hidraw", minor);
 
         if (IS_ERR(dev->dev)) {
-                spin_lock(&minors_lock);
                 hidraw_table[minor] = NULL;
-                spin_unlock(&minors_lock);
+                mutex_unlock(&minors_lock);
                 result = PTR_ERR(dev->dev);
                 kfree(dev);
                 goto out;
         }
 
+        mutex_unlock(&minors_lock);
         init_waitqueue_head(&dev->wait);
         INIT_LIST_HEAD(&dev->list);
 
@@ -360,9 +362,9 @@ void hidraw_disconnect(struct hid_device *hid)
 
         hidraw->exist = 0;
 
-        spin_lock(&minors_lock);
+        mutex_lock(&minors_lock);
         hidraw_table[hidraw->minor] = NULL;
-        spin_unlock(&minors_lock);
+        mutex_unlock(&minors_lock);
 
         device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor));
 
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 18e5ddd722cd..d746bf8284dd 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -781,6 +781,8 @@ static int usbhid_start(struct hid_device *hid)
         unsigned int n, insize = 0;
         int ret;
 
+        clear_bit(HID_DISCONNECTED, &usbhid->iofl);
+
         usbhid->bufsize = HID_MIN_BUFFER_SIZE;
         hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize);
         hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize);
@@ -847,12 +849,6 @@ static int usbhid_start(struct hid_device *hid)
                 }
         }
 
-        if (!usbhid->urbin) {
-                err_hid("couldn't find an input interrupt endpoint");
-                ret = -ENODEV;
-                goto fail;
-        }
-
         init_waitqueue_head(&usbhid->wait);
         INIT_WORK(&usbhid->reset_work, hid_reset);
         setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid);
@@ -888,6 +884,9 @@ fail:
         usb_free_urb(usbhid->urbin);
         usb_free_urb(usbhid->urbout);
         usb_free_urb(usbhid->urbctrl);
+        usbhid->urbin = NULL;
+        usbhid->urbout = NULL;
+        usbhid->urbctrl = NULL;
         hid_free_buffers(dev, hid);
         mutex_unlock(&usbhid->setup);
         return ret;
@@ -924,6 +923,9 @@ static void usbhid_stop(struct hid_device *hid)
         usb_free_urb(usbhid->urbin);
         usb_free_urb(usbhid->urbctrl);
         usb_free_urb(usbhid->urbout);
+        usbhid->urbin = NULL; /* don't mess up next start */
+        usbhid->urbctrl = NULL;
+        usbhid->urbout = NULL;
 
         hid_free_buffers(hid_to_usb_dev(hid), hid);
         mutex_unlock(&usbhid->setup);
@@ -940,15 +942,26 @@ static struct hid_ll_driver usb_hid_driver = {
 
 static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
+        struct usb_host_interface *interface = intf->cur_altsetting;
         struct usb_device *dev = interface_to_usbdev(intf);
         struct usbhid_device *usbhid;
         struct hid_device *hid;
+        unsigned int n, has_in = 0;
         size_t len;
         int ret;
 
         dbg_hid("HID probe called for ifnum %d\n",
                         intf->altsetting->desc.bInterfaceNumber);
 
+        for (n = 0; n < interface->desc.bNumEndpoints; n++)
+                if (usb_endpoint_is_int_in(&interface->endpoint[n].desc))
+                        has_in++;
+        if (!has_in) {
+                dev_err(&intf->dev, "couldn't find an input interrupt "
+                                "endpoint\n");
+                return -ENODEV;
+        }
+
         hid = hid_allocate_device();
         if (IS_ERR(hid))
                 return PTR_ERR(hid);
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 6de1e0ffd391..c709e821f04b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -159,6 +159,16 @@ config SENSORS_ADM9240
           This driver can also be built as a module.  If so, the module
           will be called adm9240.
 
+config SENSORS_ADT7462
+        tristate "Analog Devices ADT7462"
+        depends on I2C && EXPERIMENTAL
+        help
+          If you say yes here you get support for the Analog Devices
+          ADT7462 temperature monitoring chips.
+
+          This driver can also be built as a module. If so, the module
+          will be called adt7462.
+
 config SENSORS_ADT7470
         tristate "Analog Devices ADT7470"
         depends on I2C && EXPERIMENTAL
@@ -825,6 +835,25 @@ config SENSORS_HDAPS
           Say Y here if you have an applicable laptop and want to experience
           the awesome power of hdaps.
 
+config SENSORS_LIS3LV02D
+        tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
+        depends on ACPI && INPUT
+        default n
+        help
+          This driver provides support for the LIS3LV02Dx accelerometer. In
+          particular, it can be found in a number of HP laptops, which have the
+          "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
+          systems the driver should load automatically (via ACPI). The
+          accelerometer might also be found in other systems, connected via SPI
+          or I2C.  The accelerometer data is readable via
+          /sys/devices/platform/lis3lv02d.
+
+          This driver also provides an absolute input class device, allowing
+          the laptop to act as a pinball machine-esque joystick.
+
+          This driver can also be built as a module.  If so, the module
+          will be called lis3lv02d.
+
 config SENSORS_APPLESMC
         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
         depends on INPUT && X86
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 042d5a78622e..58fc5be5355d 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_ADM1029)	+= adm1029.o
 obj-$(CONFIG_SENSORS_ADM1031)   += adm1031.o
 obj-$(CONFIG_SENSORS_ADM9240)   += adm9240.o
 obj-$(CONFIG_SENSORS_ADS7828)   += ads7828.o
+obj-$(CONFIG_SENSORS_ADT7462)   += adt7462.o
 obj-$(CONFIG_SENSORS_ADT7470)   += adt7470.o
 obj-$(CONFIG_SENSORS_ADT7473)   += adt7473.o
 obj-$(CONFIG_SENSORS_APPLESMC)  += applesmc.o
@@ -48,6 +49,7 @@ obj-$(CONFIG_SENSORS_IBMAEM)	+= ibmaem.o
 obj-$(CONFIG_SENSORS_IBMPEX)    += ibmpex.o
 obj-$(CONFIG_SENSORS_IT87)      += it87.o
 obj-$(CONFIG_SENSORS_K8TEMP)    += k8temp.o
+obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o
 obj-$(CONFIG_SENSORS_LM63)      += lm63.o
 obj-$(CONFIG_SENSORS_LM70)      += lm70.o
 obj-$(CONFIG_SENSORS_LM75)      += lm75.o
diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c
new file mode 100644
index 000000000000..66107b4dc12a
--- /dev/null
+++ b/drivers/hwmon/adt7462.c
@@ -0,0 +1,2002 @@
+/*
+ * A hwmon driver for the Analog Devices ADT7462
+ * Copyright (C) 2008 IBM
+ *
+ * Author: Darrick J. Wong <djwong@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/log2.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(adt7462);
+
+/* ADT7462 registers */
+#define ADT7462_REG_DEVICE                      0x3D
+#define ADT7462_REG_VENDOR                      0x3E
+#define ADT7462_REG_REVISION                    0x3F
+
+#define ADT7462_REG_MIN_TEMP_BASE_ADDR          0x44
+#define ADT7462_REG_MIN_TEMP_MAX_ADDR           0x47
+#define ADT7462_REG_MAX_TEMP_BASE_ADDR          0x48
+#define ADT7462_REG_MAX_TEMP_MAX_ADDR           0x4B
+#define ADT7462_REG_TEMP_BASE_ADDR              0x88
+#define ADT7462_REG_TEMP_MAX_ADDR               0x8F
+
+#define ADT7462_REG_FAN_BASE_ADDR               0x98
+#define ADT7462_REG_FAN_MAX_ADDR                0x9F
+#define ADT7462_REG_FAN2_BASE_ADDR              0xA2
+#define ADT7462_REG_FAN2_MAX_ADDR               0xA9
+#define ADT7462_REG_FAN_ENABLE                  0x07
+#define ADT7462_REG_FAN_MIN_BASE_ADDR           0x78
+#define ADT7462_REG_FAN_MIN_MAX_ADDR            0x7F
+
+#define ADT7462_REG_CFG2                        0x02
+#define         ADT7462_FSPD_MASK               0x20
+
+#define ADT7462_REG_PWM_BASE_ADDR               0xAA
+#define ADT7462_REG_PWM_MAX_ADDR                0xAD
+#define ADT7462_REG_PWM_MIN_BASE_ADDR           0x28
+#define ADT7462_REG_PWM_MIN_MAX_ADDR            0x2B
+#define ADT7462_REG_PWM_MAX                     0x2C
+#define ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR      0x5C
+#define ADT7462_REG_PWM_TEMP_MIN_MAX_ADDR       0x5F
+#define ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR    0x60
+#define ADT7462_REG_PWM_TEMP_RANGE_MAX_ADDR     0x63
+#define         ADT7462_PWM_HYST_MASK           0x0F
+#define         ADT7462_PWM_RANGE_MASK          0xF0
+#define         ADT7462_PWM_RANGE_SHIFT         4
+#define ADT7462_REG_PWM_CFG_BASE_ADDR           0x21
+#define ADT7462_REG_PWM_CFG_MAX_ADDR            0x24
+#define         ADT7462_PWM_CHANNEL_MASK        0xE0
+#define         ADT7462_PWM_CHANNEL_SHIFT       5
+
+#define ADT7462_REG_PIN_CFG_BASE_ADDR           0x10
+#define ADT7462_REG_PIN_CFG_MAX_ADDR            0x13
+#define         ADT7462_PIN7_INPUT              0x01    /* cfg0 */
+#define         ADT7462_DIODE3_INPUT            0x20
+#define         ADT7462_DIODE1_INPUT            0x40
+#define         ADT7462_VID_INPUT               0x80
+#define         ADT7462_PIN22_INPUT             0x04    /* cfg1 */
+#define         ADT7462_PIN21_INPUT             0x08
+#define         ADT7462_PIN19_INPUT             0x10
+#define         ADT7462_PIN15_INPUT             0x20
+#define         ADT7462_PIN13_INPUT             0x40
+#define         ADT7462_PIN8_INPUT              0x80
+#define         ADT7462_PIN23_MASK              0x03
+#define         ADT7462_PIN23_SHIFT             0
+#define         ADT7462_PIN26_MASK              0x0C    /* cfg2 */
+#define         ADT7462_PIN26_SHIFT             2
+#define         ADT7462_PIN25_MASK              0x30
+#define         ADT7462_PIN25_SHIFT             4
+#define         ADT7462_PIN24_MASK              0xC0
+#define         ADT7462_PIN24_SHIFT             6
+#define         ADT7462_PIN26_VOLT_INPUT        0x08
+#define         ADT7462_PIN25_VOLT_INPUT        0x20
+#define         ADT7462_PIN28_SHIFT             6       /* cfg3 */
+#define         ADT7462_PIN28_VOLT              0x5
+
+#define ADT7462_REG_ALARM1                      0xB8
+#define         ADT7462_LT_ALARM                0x02
+#define         ADT7462_R1T_ALARM               0x04
+#define         ADT7462_R2T_ALARM               0x08
+#define         ADT7462_R3T_ALARM               0x10
+#define ADT7462_REG_ALARM2                      0xBB
+#define         ADT7462_V0_ALARM                0x01
+#define         ADT7462_V1_ALARM                0x02
+#define         ADT7462_V2_ALARM                0x04
+#define         ADT7462_V3_ALARM                0x08
+#define         ADT7462_V4_ALARM                0x10
+#define         ADT7462_V5_ALARM                0x20
+#define         ADT7462_V6_ALARM                0x40
+#define         ADT7462_V7_ALARM                0x80
+#define ADT7462_REG_ALARM3                      0xBC
+#define         ADT7462_V8_ALARM                0x08
+#define         ADT7462_V9_ALARM                0x10
+#define         ADT7462_V10_ALARM               0x20
+#define         ADT7462_V11_ALARM               0x40
+#define         ADT7462_V12_ALARM               0x80
+#define ADT7462_REG_ALARM4                      0xBD
+#define         ADT7462_F0_ALARM                0x01
+#define         ADT7462_F1_ALARM                0x02
+#define         ADT7462_F2_ALARM                0x04
+#define         ADT7462_F3_ALARM                0x08
+#define         ADT7462_F4_ALARM                0x10
+#define         ADT7462_F5_ALARM                0x20
+#define         ADT7462_F6_ALARM                0x40
+#define         ADT7462_F7_ALARM                0x80
+#define ADT7462_ALARM1                          0x0000
+#define ADT7462_ALARM2                          0x0100
+#define ADT7462_ALARM3                          0x0200
+#define ADT7462_ALARM4                          0x0300
+#define ADT7462_ALARM_REG_SHIFT                 8
+#define ADT7462_ALARM_FLAG_MASK                 0x0F
+
+#define ADT7462_TEMP_COUNT              4
+#define ADT7462_TEMP_REG(x)             (ADT7462_REG_TEMP_BASE_ADDR + (x * 2))
+#define ADT7462_TEMP_MIN_REG(x)         (ADT7462_REG_MIN_TEMP_BASE_ADDR + (x))
+#define ADT7462_TEMP_MAX_REG(x)         (ADT7462_REG_MAX_TEMP_BASE_ADDR + (x))
+#define TEMP_FRAC_OFFSET                6
+
+#define ADT7462_FAN_COUNT               8
+#define ADT7462_REG_FAN_MIN(x)          (ADT7462_REG_FAN_MIN_BASE_ADDR + (x))
+
+#define ADT7462_PWM_COUNT               4
+#define ADT7462_REG_PWM(x)              (ADT7462_REG_PWM_BASE_ADDR + (x))
+#define ADT7462_REG_PWM_MIN(x)          (ADT7462_REG_PWM_MIN_BASE_ADDR + (x))
+#define ADT7462_REG_PWM_TMIN(x)         \
+        (ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR + (x))
+#define ADT7462_REG_PWM_TRANGE(x)       \
+        (ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR + (x))
+
+#define ADT7462_PIN_CFG_REG_COUNT       4
+#define ADT7462_REG_PIN_CFG(x)          (ADT7462_REG_PIN_CFG_BASE_ADDR + (x))
+#define ADT7462_REG_PWM_CFG(x)          (ADT7462_REG_PWM_CFG_BASE_ADDR + (x))
+
+#define ADT7462_ALARM_REG_COUNT         4
+
+/*
+ * The chip can measure 13 different voltage sources:
+ *
+ * 1. +12V1 (pin 7)
+ * 2. Vccp1/+2.5V/+1.8V/+1.5V (pin 23)
+ * 3. +12V3 (pin 22)
+ * 4. +5V (pin 21)
+ * 5. +1.25V/+0.9V (pin 19)
+ * 6. +2.5V/+1.8V (pin 15)
+ * 7. +3.3v (pin 13)
+ * 8. +12V2 (pin 8)
+ * 9. Vbatt/FSB_Vtt (pin 26)
+ * A. +3.3V/+1.2V1 (pin 25)
+ * B. Vccp2/+2.5V/+1.8V/+1.5V (pin 24)
+ * C. +1.5V ICH (only if BOTH pin 28/29 are set to +1.5V)
+ * D. +1.5V 3GPIO (only if BOTH pin 28/29 are set to +1.5V)
+ *
+ * Each of these 13 has a factor to convert raw to voltage.  Even better,
+ * the pins can be connected to other sensors (tach/gpio/hot/etc), which
+ * makes the bookkeeping tricky.
+ *
+ * Some, but not all, of these voltages have low/high limits.
+ */
+#define ADT7462_VOLT_COUNT      12
+
+#define ADT7462_VENDOR          0x41
+#define ADT7462_DEVICE          0x62
+/* datasheet only mentions a revision 4 */
+#define ADT7462_REVISION        0x04
+
+/* How often do we reread sensors values? (In jiffies) */
+#define SENSOR_REFRESH_INTERVAL (2 * HZ)
+
+/* How often do we reread sensor limit values? (In jiffies) */
+#define LIMIT_REFRESH_INTERVAL  (60 * HZ)
+
+/* datasheet says to divide this number by the fan reading to get fan rpm */
+#define FAN_PERIOD_TO_RPM(x)    ((90000 * 60) / (x))
+#define FAN_RPM_TO_PERIOD       FAN_PERIOD_TO_RPM
+#define FAN_PERIOD_INVALID      65535
+#define FAN_DATA_VALID(x)       ((x) && (x) != FAN_PERIOD_INVALID)
+
+#define MASK_AND_SHIFT(value, prefix)   \
+        (((value) & prefix##_MASK) >> prefix##_SHIFT)
+
+#define ROUND_DIV(x, divisor)  (((x) + ((divisor) / 2)) / (divisor))
+
+struct adt7462_data {
+        struct device           *hwmon_dev;
+        struct attribute_group  attrs;
+        struct mutex            lock;
+        char                    sensors_valid;
+        char                    limits_valid;
+        unsigned long           sensors_last_updated;   /* In jiffies */
+        unsigned long           limits_last_updated;    /* In jiffies */
+
+        u8                      temp[ADT7462_TEMP_COUNT];
+                                /* bits 6-7 are quarter pieces of temp */
+        u8                      temp_frac[ADT7462_TEMP_COUNT];
+        u8                      temp_min[ADT7462_TEMP_COUNT];
+        u8                      temp_max[ADT7462_TEMP_COUNT];
+        u16                     fan[ADT7462_FAN_COUNT];
+        u8                      fan_enabled;
+        u8                      fan_min[ADT7462_FAN_COUNT];
+        u8                      cfg2;
+        u8                      pwm[ADT7462_PWM_COUNT];
+        u8                      pin_cfg[ADT7462_PIN_CFG_REG_COUNT];
+        u8                      voltages[ADT7462_VOLT_COUNT];
+        u8                      volt_max[ADT7462_VOLT_COUNT];
+        u8                      volt_min[ADT7462_VOLT_COUNT];
+        u8                      pwm_min[ADT7462_PWM_COUNT];
+        u8                      pwm_tmin[ADT7462_PWM_COUNT];
+        u8                      pwm_trange[ADT7462_PWM_COUNT];
+        u8                      pwm_max;        /* only one per chip */
+        u8                      pwm_cfg[ADT7462_PWM_COUNT];
+        u8                      alarms[ADT7462_ALARM_REG_COUNT];
+};
+
+static int adt7462_probe(struct i2c_client *client,
+                         const struct i2c_device_id *id);
+static int adt7462_detect(struct i2c_client *client, int kind,
+                          struct i2c_board_info *info);
+static int adt7462_remove(struct i2c_client *client);
+
+static const struct i2c_device_id adt7462_id[] = {
+        { "adt7462", adt7462 },
+        { }
+};
+MODULE_DEVICE_TABLE(i2c, adt7462_id);
+
+static struct i2c_driver adt7462_driver = {
+        .class          = I2C_CLASS_HWMON,
+        .driver = {
+                .name   = "adt7462",
+        },
+        .probe          = adt7462_probe,
+        .remove         = adt7462_remove,
+        .id_table       = adt7462_id,
+        .detect         = adt7462_detect,
+        .address_data   = &addr_data,
+};
+
+/*
+ * 16-bit registers on the ADT7462 are low-byte first.  The data sheet says
+ * that the low byte must be read before the high byte.
+ */
+static inline int adt7462_read_word_data(struct i2c_client *client, u8 reg)
+{
+        u16 foo;
+        foo = i2c_smbus_read_byte_data(client, reg);
+        foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8);
+        return foo;
+}
+
+/* For some reason these registers are not contiguous. */
+static int ADT7462_REG_FAN(int fan)
+{
+        if (fan < 4)
+                return ADT7462_REG_FAN_BASE_ADDR + (2 * fan);
+        return ADT7462_REG_FAN2_BASE_ADDR + (2 * (fan - 4));
+}
+
+/* Voltage registers are scattered everywhere */
+static int ADT7462_REG_VOLT_MAX(struct adt7462_data *data, int which)
+{
+        switch (which) {
+        case 0:
+                if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
+                        return 0x7C;
+                break;
+        case 1:
+                return 0x69;
+        case 2:
+                if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
+                        return 0x7F;
+                break;
+        case 3:
+                if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
+                        return 0x7E;
+                break;
+        case 4:
+                if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT))
+                        return 0x4B;
+                break;
+        case 5:
+                if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT))
+                        return 0x49;
+                break;
+        case 6:
+                if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
+                        return 0x68;
+                break;
+        case 7:
+                if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
+                        return 0x7D;
+                break;
+        case 8:
+                if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT))
+                        return 0x6C;
+                break;
+        case 9:
+                if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT))
+                        return 0x6B;
+                break;
+        case 10:
+                return 0x6A;
+        case 11:
+                if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+                                        ADT7462_PIN28_VOLT &&
+                    !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+                        return 0x50;
+                break;
+        case 12:
+                if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+                                        ADT7462_PIN28_VOLT &&
+                    !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+                        return 0x4C;
+                break;
+        }
+        return -ENODEV;
+}
+
+static int ADT7462_REG_VOLT_MIN(struct adt7462_data *data, int which)
+{
+        switch (which) {
+        case 0:
+                if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
+                        return 0x6D;
+                break;
+        case 1:
+                return 0x72;
+        case 2:
+                if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
+                        return 0x6F;
+                break;
+        case 3:
+                if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
+                        return 0x71;
+                break;
+        case 4:
+                if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT))
+                        return 0x47;
+                break;
+        case 5:
+                if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT))
+                        return 0x45;
+                break;
+        case 6:
+                if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
+                        return 0x70;
+                break;
+        case 7:
+                if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
+                        return 0x6E;
+                break;
+        case 8:
+                if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT))
+                        return 0x75;
+                break;
+        case 9:
+                if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT))
+                        return 0x74;
+                break;
+        case 10:
+                return 0x73;
+        case 11:
+                if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+                                        ADT7462_PIN28_VOLT &&
+                    !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+                        return 0x76;
+                break;
+        case 12:
+                if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+                                        ADT7462_PIN28_VOLT &&
+                    !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+                        return 0x77;
+                break;
+        }
+        return -ENODEV;
+}
+
+static int ADT7462_REG_VOLT(struct adt7462_data *data, int which)
+{
+        switch (which) {
+        case 0:
+                if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
+                        return 0xA3;
+                break;
+        case 1:
+                return 0x90;
+        case 2:
+                if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
+                        return 0xA9;
+                break;
+        case 3:
+                if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
+                        return 0xA7;
+                break;
+        case 4:
+                if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT))
+                        return 0x8F;
+                break;
+        case 5:
+                if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT))
+                        return 0x8B;
+                break;
+        case 6:
+                if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
+                        return 0x96;
+                break;
+        case 7:
+                if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
+                        return 0xA5;
+                break;
+        case 8:
+                if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT))
+                        return 0x93;
+                break;
+        case 9:
+                if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT))
+                        return 0x92;
+                break;
+        case 10:
+                return 0x91;
+        case 11:
+                if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+                                        ADT7462_PIN28_VOLT &&
+                    !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+                        return 0x94;
+                break;
+        case 12:
+                if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+                                        ADT7462_PIN28_VOLT &&
+                    !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+                        return 0x95;
+                break;
+        }
+        return -ENODEV;
+}
+
+/* Provide labels for sysfs */
+static const char *voltage_label(struct adt7462_data *data, int which)
+{
+        switch (which) {
+        case 0:
+                if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
+                        return "+12V1";
+                break;
+        case 1:
+                switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) {
+                case 0:
+                        return "Vccp1";
+                case 1:
+                        return "+2.5V";
+                case 2:
+                        return "+1.8V";
+                case 3:
+                        return "+1.5V";
+                }
+        case 2:
+                if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
+                        return "+12V3";
+                break;
+        case 3:
+                if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
+                        return "+5V";
+                break;
+        case 4:
+                if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) {
+                        if (data->pin_cfg[1] & ADT7462_PIN19_INPUT)
+                                return "+0.9V";
+                        return "+1.25V";
+                }
+                break;
+        case 5:
+                if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) {
+                        if (data->pin_cfg[1] & ADT7462_PIN19_INPUT)
+                                return "+1.8V";
+                        return "+2.5V";
+                }
+                break;
+        case 6:
+                if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
+                        return "+3.3V";
+                break;
+        case 7:
+                if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
+                        return "+12V2";
+                break;
+        case 8:
+                switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) {
+                case 0:
+                        return "Vbatt";
+                case 1:
+                        return "FSB_Vtt";
+                }
+                break;
+        case 9:
+                switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) {
+                case 0:
+                        return "+3.3V";
+                case 1:
+                        return "+1.2V1";
+                }
+                break;
+        case 10:
+                switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) {
+                case 0:
+                        return "Vccp2";
+                case 1:
+                        return "+2.5V";
+                case 2:
+                        return "+1.8V";
+                case 3:
+                        return "+1.5";
+                }
+        case 11:
+                if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+                                        ADT7462_PIN28_VOLT &&
+                    !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+                        return "+1.5V ICH";
+                break;
+        case 12:
+                if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+                                        ADT7462_PIN28_VOLT &&
+                    !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+                        return "+1.5V 3GPIO";
+                break;
+        }
+        return "N/A";
+}
+
+/* Multipliers are actually in uV, not mV. */
+static int voltage_multiplier(struct adt7462_data *data, int which)
+{
+        switch (which) {
+        case 0:
+                if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT))
+                        return 62500;
+                break;
+        case 1:
+                switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) {
+                case 0:
+                        if (data->pin_cfg[0] & ADT7462_VID_INPUT)
+                                return 12500;
+                        return 6250;
+                case 1:
+                        return 13000;
+                case 2:
+                        return 9400;
+                case 3:
+                        return 7800;
+                }
+        case 2:
+                if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT))
+                        return 62500;
+                break;
+        case 3:
+                if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT))
+                        return 26000;
+                break;
+        case 4:
+                if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) {
+                        if (data->pin_cfg[1] & ADT7462_PIN19_INPUT)
+                                return 4690;
+                        return 6500;
+                }
+                break;
+        case 5:
+                if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) {
+                        if (data->pin_cfg[1] & ADT7462_PIN15_INPUT)
+                                return 9400;
+                        return 13000;
+                }
+                break;
+        case 6:
+                if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT))
+                        return 17200;
+                break;
+        case 7:
+                if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT))
+                        return 62500;
+                break;
+        case 8:
+                switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) {
+                case 0:
+                        return 15600;
+                case 1:
+                        return 6250;
+                }
+                break;
+        case 9:
+                switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) {
+                case 0:
+                        return 17200;
+                case 1:
+                        return 6250;
+                }
+                break;
+        case 10:
+                switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) {
+                case 0:
+                        return 6250;
+                case 1:
+                        return 13000;
+                case 2:
+                        return 9400;
+                case 3:
+                        return 7800;
+                }
+        case 11:
+        case 12:
+                if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT ==
+                                        ADT7462_PIN28_VOLT &&
+                    !(data->pin_cfg[0] & ADT7462_VID_INPUT))
+                        return 7800;
+        }
+        return 0;
+}
+
+static int temp_enabled(struct adt7462_data *data, int which)
+{
+        switch (which) {
+        case 0:
+        case 2:
+                return 1;
+        case 1:
+                if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT)
+                        return 1;
+                break;
+        case 3:
+                if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT)
+                        return 1;
+                break;
+        }
+        return 0;
+}
+
+static const char *temp_label(struct adt7462_data *data, int which)
+{
+        switch (which) {
+        case 0:
+                return "local";
+        case 1:
+                if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT)
+                        return "remote1";
+                break;
+        case 2:
+                return "remote2";
+        case 3:
+                if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT)
+                        return "remote3";
+                break;
+        }
+        return "N/A";
+}
+
+/* Map Trange register values to mC */
+#define NUM_TRANGE_VALUES       16
+static const int trange_values[NUM_TRANGE_VALUES] = {
+        2000,
+        2500,
+        3300,
+        4000,
+        5000,
+        6700,
+        8000,
+        10000,
+        13300,
+        16000,
+        20000,
+        26700,
+        32000,
+        40000,
+        53300,
+        80000
+};
+
+static int find_trange_value(int trange)
+{
+        int i;
+
+        for (i = 0; i < NUM_TRANGE_VALUES; i++)
+                if (trange_values[i] == trange)
+                        return i;
+
+        return -ENODEV;
+}
+
+static struct adt7462_data *adt7462_update_device(struct device *dev)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7462_data *data = i2c_get_clientdata(client);
+        unsigned long local_jiffies = jiffies;
+        int i;
+
+        mutex_lock(&data->lock);
+        if (time_before(local_jiffies, data->sensors_last_updated +
+                SENSOR_REFRESH_INTERVAL)
+                && data->sensors_valid)
+                goto no_sensor_update;
+
+        for (i = 0; i < ADT7462_TEMP_COUNT; i++) {
+                /*
+                 * Reading the fractional register locks the integral
+                 * register until both have been read.
+                 */
+                data->temp_frac[i] = i2c_smbus_read_byte_data(client,
+                                                ADT7462_TEMP_REG(i));
+                data->temp[i] = i2c_smbus_read_byte_data(client,
+                                                ADT7462_TEMP_REG(i) + 1);
+        }
+
+        for (i = 0; i < ADT7462_FAN_COUNT; i++)
+                data->fan[i] = adt7462_read_word_data(client,
+                                                ADT7462_REG_FAN(i));
+
+        data->fan_enabled = i2c_smbus_read_byte_data(client,
+                                        ADT7462_REG_FAN_ENABLE);
+
+        for (i = 0; i < ADT7462_PWM_COUNT; i++)
+                data->pwm[i] = i2c_smbus_read_byte_data(client,
+                                                ADT7462_REG_PWM(i));
+
+        for (i = 0; i < ADT7462_PIN_CFG_REG_COUNT; i++)
+                data->pin_cfg[i] = i2c_smbus_read_byte_data(client,
+                                ADT7462_REG_PIN_CFG(i));
+
+        for (i = 0; i < ADT7462_VOLT_COUNT; i++) {
+                int reg = ADT7462_REG_VOLT(data, i);
+                if (!reg)
+                        data->voltages[i] = 0;
+                else
+                        data->voltages[i] = i2c_smbus_read_byte_data(client,
+                                                                     reg);
+        }
+
+        data->alarms[0] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM1);
+        data->alarms[1] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM2);
+        data->alarms[2] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM3);
+        data->alarms[3] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM4);
+
+        data->sensors_last_updated = local_jiffies;
+        data->sensors_valid = 1;
+
+no_sensor_update:
+        if (time_before(local_jiffies, data->limits_last_updated +
+                LIMIT_REFRESH_INTERVAL)
+                && data->limits_valid)
+                goto out;
+
+        for (i = 0; i < ADT7462_TEMP_COUNT; i++) {
+                data->temp_min[i] = i2c_smbus_read_byte_data(client,
+                                                ADT7462_TEMP_MIN_REG(i));
+                data->temp_max[i] = i2c_smbus_read_byte_data(client,
+                                                ADT7462_TEMP_MAX_REG(i));
+        }
+
+        for (i = 0; i < ADT7462_FAN_COUNT; i++)
+                data->fan_min[i] = i2c_smbus_read_byte_data(client,
+                                                ADT7462_REG_FAN_MIN(i));
+
+        for (i = 0; i < ADT7462_VOLT_COUNT; i++) {
+                int reg = ADT7462_REG_VOLT_MAX(data, i);
+                data->volt_max[i] =
+                        (reg ? i2c_smbus_read_byte_data(client, reg) : 0);
+
+                reg = ADT7462_REG_VOLT_MIN(data, i);
+                data->volt_min[i] =
+                        (reg ? i2c_smbus_read_byte_data(client, reg) : 0);
+        }
+
+        for (i = 0; i < ADT7462_PWM_COUNT; i++) {
+                data->pwm_min[i] = i2c_smbus_read_byte_data(client,
+                                                ADT7462_REG_PWM_MIN(i));
+                data->pwm_tmin[i] = i2c_smbus_read_byte_data(client,
+                                                ADT7462_REG_PWM_TMIN(i));
+                data->pwm_trange[i] = i2c_smbus_read_byte_data(client,
+                                                ADT7462_REG_PWM_TRANGE(i));
+                data->pwm_cfg[i] = i2c_smbus_read_byte_data(client,
+                                                ADT7462_REG_PWM_CFG(i));
+        }
+
+        data->pwm_max = i2c_smbus_read_byte_data(client, ADT7462_REG_PWM_MAX);
+
+        data->cfg2 = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2);
+
+        data->limits_last_updated = local_jiffies;
+        data->limits_valid = 1;
+
+out:
+        mutex_unlock(&data->lock);
+        return data;
+}
+
+static ssize_t show_temp_min(struct device *dev,
+                             struct device_attribute *devattr,
+                             char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+
+        if (!temp_enabled(data, attr->index))
+                return sprintf(buf, "0\n");
+
+        return sprintf(buf, "%d\n", 1000 * (data->temp_min[attr->index] - 64));
+}
+
+static ssize_t set_temp_min(struct device *dev,
+                            struct device_attribute *devattr,
+                            const char *buf,
+                            size_t count)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7462_data *data = i2c_get_clientdata(client);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index))
+                return -EINVAL;
+
+        temp = ROUND_DIV(temp, 1000) + 64;
+        temp = SENSORS_LIMIT(temp, 0, 255);
+
+        mutex_lock(&data->lock);
+        data->temp_min[attr->index] = temp;
+        i2c_smbus_write_byte_data(client, ADT7462_TEMP_MIN_REG(attr->index),
+                                  temp);
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_temp_max(struct device *dev,
+                             struct device_attribute *devattr,
+                             char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+
+        if (!temp_enabled(data, attr->index))
+                return sprintf(buf, "0\n");
+
+        return sprintf(buf, "%d\n", 1000 * (data->temp_max[attr->index] - 64));
+}
+
+static ssize_t set_temp_max(struct device *dev,
+                            struct device_attribute *devattr,
+                            const char *buf,
+                            size_t count)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7462_data *data = i2c_get_clientdata(client);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index))
+                return -EINVAL;
+
+        temp = ROUND_DIV(temp, 1000) + 64;
+        temp = SENSORS_LIMIT(temp, 0, 255);
+
+        mutex_lock(&data->lock);
+        data->temp_max[attr->index] = temp;
+        i2c_smbus_write_byte_data(client, ADT7462_TEMP_MAX_REG(attr->index),
+                                  temp);
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
+                         char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+        u8 frac = data->temp_frac[attr->index] >> TEMP_FRAC_OFFSET;
+
+        if (!temp_enabled(data, attr->index))
+                return sprintf(buf, "0\n");
+
+        return sprintf(buf, "%d\n", 1000 * (data->temp[attr->index] - 64) +
+                                     250 * frac);
+}
+
+static ssize_t show_temp_label(struct device *dev,
+                               struct device_attribute *devattr,
+                               char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+
+        return sprintf(buf, "%s\n", temp_label(data, attr->index));
+}
+
+static ssize_t show_volt_max(struct device *dev,
+                             struct device_attribute *devattr,
+                             char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+        int x = voltage_multiplier(data, attr->index);
+
+        x *= data->volt_max[attr->index];
+        x /= 1000; /* convert from uV to mV */
+
+        return sprintf(buf, "%d\n", x);
+}
+
+static ssize_t set_volt_max(struct device *dev,
+                            struct device_attribute *devattr,
+                            const char *buf,
+                            size_t count)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7462_data *data = i2c_get_clientdata(client);
+        int x = voltage_multiplier(data, attr->index);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp) || !x)
+                return -EINVAL;
+
+        temp *= 1000; /* convert mV to uV */
+        temp = ROUND_DIV(temp, x);
+        temp = SENSORS_LIMIT(temp, 0, 255);
+
+        mutex_lock(&data->lock);
+        data->volt_max[attr->index] = temp;
+        i2c_smbus_write_byte_data(client,
+                                  ADT7462_REG_VOLT_MAX(data, attr->index),
+                                  temp);
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_volt_min(struct device *dev,
+                             struct device_attribute *devattr,
+                             char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+        int x = voltage_multiplier(data, attr->index);
+
+        x *= data->volt_min[attr->index];
+        x /= 1000; /* convert from uV to mV */
+
+        return sprintf(buf, "%d\n", x);
+}
+
+static ssize_t set_volt_min(struct device *dev,
+                            struct device_attribute *devattr,
+                            const char *buf,
+                            size_t count)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7462_data *data = i2c_get_clientdata(client);
+        int x = voltage_multiplier(data, attr->index);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp) || !x)
+                return -EINVAL;
+
+        temp *= 1000; /* convert mV to uV */
+        temp = ROUND_DIV(temp, x);
+        temp = SENSORS_LIMIT(temp, 0, 255);
+
+        mutex_lock(&data->lock);
+        data->volt_min[attr->index] = temp;
+        i2c_smbus_write_byte_data(client,
+                                  ADT7462_REG_VOLT_MIN(data, attr->index),
+                                  temp);
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_voltage(struct device *dev,
+                            struct device_attribute *devattr,
+                            char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+        int x = voltage_multiplier(data, attr->index);
+
+        x *= data->voltages[attr->index];
+        x /= 1000; /* convert from uV to mV */
+
+        return sprintf(buf, "%d\n", x);
+}
+
+static ssize_t show_voltage_label(struct device *dev,
+                                  struct device_attribute *devattr,
+                                  char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+
+        return sprintf(buf, "%s\n", voltage_label(data, attr->index));
+}
+
+static ssize_t show_alarm(struct device *dev,
+                          struct device_attribute *devattr,
+                          char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+        int reg = attr->index >> ADT7462_ALARM_REG_SHIFT;
+        int mask = attr->index & ADT7462_ALARM_FLAG_MASK;
+
+        if (data->alarms[reg] & mask)
+                return sprintf(buf, "1\n");
+        else
+                return sprintf(buf, "0\n");
+}
+
+static int fan_enabled(struct adt7462_data *data, int fan)
+{
+        return data->fan_enabled & (1 << fan);
+}
+
+static ssize_t show_fan_min(struct device *dev,
+                            struct device_attribute *devattr,
+                            char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+        u16 temp;
+
+        /* Only the MSB of the min fan period is stored... */
+        temp = data->fan_min[attr->index];
+        temp <<= 8;
+
+        if (!fan_enabled(data, attr->index) ||
+            !FAN_DATA_VALID(temp))
+                return sprintf(buf, "0\n");
+
+        return sprintf(buf, "%d\n", FAN_PERIOD_TO_RPM(temp));
+}
+
+static ssize_t set_fan_min(struct device *dev,
+                           struct device_attribute *devattr,
+                           const char *buf, size_t count)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7462_data *data = i2c_get_clientdata(client);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp) || !temp ||
+            !fan_enabled(data, attr->index))
+                return -EINVAL;
+
+        temp = FAN_RPM_TO_PERIOD(temp);
+        temp >>= 8;
+        temp = SENSORS_LIMIT(temp, 1, 255);
+
+        mutex_lock(&data->lock);
+        data->fan_min[attr->index] = temp;
+        i2c_smbus_write_byte_data(client, ADT7462_REG_FAN_MIN(attr->index),
+                                  temp);
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
+                        char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+
+        if (!fan_enabled(data, attr->index) ||
+            !FAN_DATA_VALID(data->fan[attr->index]))
+                return sprintf(buf, "0\n");
+
+        return sprintf(buf, "%d\n",
+                       FAN_PERIOD_TO_RPM(data->fan[attr->index]));
+}
+
+static ssize_t show_force_pwm_max(struct device *dev,
+                                  struct device_attribute *devattr,
+                                  char *buf)
+{
+        struct adt7462_data *data = adt7462_update_device(dev);
+        return sprintf(buf, "%d\n", (data->cfg2 & ADT7462_FSPD_MASK ? 1 : 0));
+}
+
+static ssize_t set_force_pwm_max(struct device *dev,
+                                 struct device_attribute *devattr,
+                                 const char *buf,
+                                 size_t count)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7462_data *data = i2c_get_clientdata(client);
+        long temp;
+        u8 reg;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        mutex_lock(&data->lock);
+        reg = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2);
+        if (temp)
+                reg |= ADT7462_FSPD_MASK;
+        else
+                reg &= ~ADT7462_FSPD_MASK;
+        data->cfg2 = reg;
+        i2c_smbus_write_byte_data(client, ADT7462_REG_CFG2, reg);
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
+                        char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+        return sprintf(buf, "%d\n", data->pwm[attr->index]);
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
+                        const char *buf, size_t count)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7462_data *data = i2c_get_clientdata(client);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = SENSORS_LIMIT(temp, 0, 255);
+
+        mutex_lock(&data->lock);
+        data->pwm[attr->index] = temp;
+        i2c_smbus_write_byte_data(client, ADT7462_REG_PWM(attr->index), temp);
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_pwm_max(struct device *dev,
+                            struct device_attribute *devattr,
+                            char *buf)
+{
+        struct adt7462_data *data = adt7462_update_device(dev);
+        return sprintf(buf, "%d\n", data->pwm_max);
+}
+
+static ssize_t set_pwm_max(struct device *dev,
+                           struct device_attribute *devattr,
+                           const char *buf,
+                           size_t count)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7462_data *data = i2c_get_clientdata(client);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = SENSORS_LIMIT(temp, 0, 255);
+
+        mutex_lock(&data->lock);
+        data->pwm_max = temp;
+        i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MAX, temp);
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_pwm_min(struct device *dev,
+                            struct device_attribute *devattr,
+                            char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+        return sprintf(buf, "%d\n", data->pwm_min[attr->index]);
+}
+
+static ssize_t set_pwm_min(struct device *dev,
+                           struct device_attribute *devattr,
+                           const char *buf,
+                           size_t count)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7462_data *data = i2c_get_clientdata(client);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = SENSORS_LIMIT(temp, 0, 255);
+
+        mutex_lock(&data->lock);
+        data->pwm_min[attr->index] = temp;
+        i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MIN(attr->index),
+                                  temp);
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_pwm_hyst(struct device *dev,
+                             struct device_attribute *devattr,
+                             char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+        return sprintf(buf, "%d\n", 1000 *
+                      (data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK));
+}
+
+static ssize_t set_pwm_hyst(struct device *dev,
+                            struct device_attribute *devattr,
+                            const char *buf,
+                            size_t count)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7462_data *data = i2c_get_clientdata(client);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = ROUND_DIV(temp, 1000);
+        temp = SENSORS_LIMIT(temp, 0, 15);
+
+        /* package things up */
+        temp &= ADT7462_PWM_HYST_MASK;
+        temp |= data->pwm_trange[attr->index] & ADT7462_PWM_RANGE_MASK;
+
+        mutex_lock(&data->lock);
+        data->pwm_trange[attr->index] = temp;
+        i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index),
+                                  temp);
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_pwm_tmax(struct device *dev,
+                             struct device_attribute *devattr,
+                             char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+
+        /* tmax = tmin + trange */
+        int trange = trange_values[data->pwm_trange[attr->index] >>
+                                   ADT7462_PWM_RANGE_SHIFT];
+        int tmin = (data->pwm_tmin[attr->index] - 64) * 1000;
+
+        return sprintf(buf, "%d\n", tmin + trange);
+}
+
+static ssize_t set_pwm_tmax(struct device *dev,
+                            struct device_attribute *devattr,
+                            const char *buf,
+                            size_t count)
+{
+        int temp;
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7462_data *data = i2c_get_clientdata(client);
+        int tmin, trange_value;
+        long trange;
+
+        if (strict_strtol(buf, 10, &trange))
+                return -EINVAL;
+
+        /* trange = tmax - tmin */
+        tmin = (data->pwm_tmin[attr->index] - 64) * 1000;
+        trange_value = find_trange_value(trange - tmin);
+
+        if (trange_value < 0)
+                return -EINVAL;
+
+        temp = trange_value << ADT7462_PWM_RANGE_SHIFT;
+        temp |= data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK;
+
+        mutex_lock(&data->lock);
+        data->pwm_trange[attr->index] = temp;
+        i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index),
+                                  temp);
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_pwm_tmin(struct device *dev,
+                             struct device_attribute *devattr,
+                             char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+        return sprintf(buf, "%d\n", 1000 * (data->pwm_tmin[attr->index] - 64));
+}
+
+static ssize_t set_pwm_tmin(struct device *dev,
+                            struct device_attribute *devattr,
+                            const char *buf,
+                            size_t count)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7462_data *data = i2c_get_clientdata(client);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = ROUND_DIV(temp, 1000) + 64;
+        temp = SENSORS_LIMIT(temp, 0, 255);
+
+        mutex_lock(&data->lock);
+        data->pwm_tmin[attr->index] = temp;
+        i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TMIN(attr->index),
+                                  temp);
+        mutex_unlock(&data->lock);
+
+        return count;
+}
+
+static ssize_t show_pwm_auto(struct device *dev,
+                             struct device_attribute *devattr,
+                             char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+        int cfg = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT;
+
+        switch (cfg) {
+        case 4: /* off */
+                return sprintf(buf, "0\n");
+        case 7: /* manual */
+                return sprintf(buf, "1\n");
+        default: /* automatic */
+                return sprintf(buf, "2\n");
+        }
+}
+
+static void set_pwm_channel(struct i2c_client *client,
+                            struct adt7462_data *data,
+                            int which,
+                            int value)
+{
+        int temp = data->pwm_cfg[which] & ~ADT7462_PWM_CHANNEL_MASK;
+        temp |= value << ADT7462_PWM_CHANNEL_SHIFT;
+
+        mutex_lock(&data->lock);
+        data->pwm_cfg[which] = temp;
+        i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_CFG(which), temp);
+        mutex_unlock(&data->lock);
+}
+
+static ssize_t set_pwm_auto(struct device *dev,
+                            struct device_attribute *devattr,
+                            const char *buf,
+                            size_t count)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7462_data *data = i2c_get_clientdata(client);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        switch (temp) {
+        case 0: /* off */
+                set_pwm_channel(client, data, attr->index, 4);
+                return count;
+        case 1: /* manual */
+                set_pwm_channel(client, data, attr->index, 7);
+                return count;
+        default:
+                return -EINVAL;
+        }
+}
+
+static ssize_t show_pwm_auto_temp(struct device *dev,
+                                  struct device_attribute *devattr,
+                                  char *buf)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct adt7462_data *data = adt7462_update_device(dev);
+        int channel = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT;
+
+        switch (channel) {
+        case 0: /* temp[1234] only */
+        case 1:
+        case 2:
+        case 3:
+                return sprintf(buf, "%d\n", (1 << channel));
+        case 5: /* temp1 & temp4  */
+                return sprintf(buf, "9\n");
+        case 6:
+                return sprintf(buf, "15\n");
+        default:
+                return sprintf(buf, "0\n");
+        }
+}
+
+static int cvt_auto_temp(int input)
+{
+        if (input == 0xF)
+                return 6;
+        if (input == 0x9)
+                return 5;
+        if (input < 1 || !is_power_of_2(input))
+                return -EINVAL;
+        return ilog2(input);
+}
+
+static ssize_t set_pwm_auto_temp(struct device *dev,
+                                 struct device_attribute *devattr,
+                                 const char *buf,
+                                 size_t count)
+{
+        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+        struct i2c_client *client = to_i2c_client(dev);
+        struct adt7462_data *data = i2c_get_clientdata(client);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = cvt_auto_temp(temp);
+        if (temp < 0)
+                return temp;
+
+        set_pwm_channel(client, data, attr->index, temp);
+
+        return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
+                    set_temp_max, 0);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
+                    set_temp_max, 1);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max,
+                    set_temp_max, 2);
+static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp_max,
+                    set_temp_max, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,
+                    set_temp_min, 0);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min,
+                    set_temp_min, 1);
+static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min,
+                    set_temp_min, 2);
+static SENSOR_DEVICE_ATTR(temp4_min, S_IWUSR | S_IRUGO, show_temp_min,
+                    set_temp_min, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM1 | ADT7462_LT_ALARM);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM1 | ADT7462_R1T_ALARM);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM1 | ADT7462_R2T_ALARM);
+static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM1 | ADT7462_R3T_ALARM);
+
+static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max,
+                    set_volt_max, 0);
+static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max,
+                    set_volt_max, 1);
+static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_volt_max,
+                    set_volt_max, 2);
+static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_volt_max,
+                    set_volt_max, 3);
+static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_volt_max,
+                    set_volt_max, 4);
+static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_volt_max,
+                    set_volt_max, 5);
+static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO, show_volt_max,
+                    set_volt_max, 6);
+static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO, show_volt_max,
+                    set_volt_max, 7);
+static SENSOR_DEVICE_ATTR(in9_max, S_IWUSR | S_IRUGO, show_volt_max,
+                    set_volt_max, 8);
+static SENSOR_DEVICE_ATTR(in10_max, S_IWUSR | S_IRUGO, show_volt_max,
+                    set_volt_max, 9);
+static SENSOR_DEVICE_ATTR(in11_max, S_IWUSR | S_IRUGO, show_volt_max,
+                    set_volt_max, 10);
+static SENSOR_DEVICE_ATTR(in12_max, S_IWUSR | S_IRUGO, show_volt_max,
+                    set_volt_max, 11);
+static SENSOR_DEVICE_ATTR(in13_max, S_IWUSR | S_IRUGO, show_volt_max,
+                    set_volt_max, 12);
+
+static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min,
+                    set_volt_min, 0);
+static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min,
+                    set_volt_min, 1);
+static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_volt_min,
+                    set_volt_min, 2);
+static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_volt_min,
+                    set_volt_min, 3);
+static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_volt_min,
+                    set_volt_min, 4);
+static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_volt_min,
+                    set_volt_min, 5);
+static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO, show_volt_min,
+                    set_volt_min, 6);
+static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO, show_volt_min,
+                    set_volt_min, 7);
+static SENSOR_DEVICE_ATTR(in9_min, S_IWUSR | S_IRUGO, show_volt_min,
+                    set_volt_min, 8);
+static SENSOR_DEVICE_ATTR(in10_min, S_IWUSR | S_IRUGO, show_volt_min,
+                    set_volt_min, 9);
+static SENSOR_DEVICE_ATTR(in11_min, S_IWUSR | S_IRUGO, show_volt_min,
+                    set_volt_min, 10);
+static SENSOR_DEVICE_ATTR(in12_min, S_IWUSR | S_IRUGO, show_volt_min,
+                    set_volt_min, 11);
+static SENSOR_DEVICE_ATTR(in13_min, S_IWUSR | S_IRUGO, show_volt_min,
+                    set_volt_min, 12);
+
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 0);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 1);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_voltage, NULL, 2);
+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_voltage, NULL, 3);
+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 4);
+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 5);
+static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 6);
+static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_voltage, NULL, 7);
+static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_voltage, NULL, 8);
+static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_voltage, NULL, 9);
+static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_voltage, NULL, 10);
+static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_voltage, NULL, 11);
+static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_voltage, NULL, 12);
+
+static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_voltage_label, NULL, 0);
+static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_voltage_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_voltage_label, NULL, 2);
+static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_voltage_label, NULL, 3);
+static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_voltage_label, NULL, 4);
+static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_voltage_label, NULL, 5);
+static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_voltage_label, NULL, 6);
+static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_voltage_label, NULL, 7);
+static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_voltage_label, NULL, 8);
+static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_voltage_label, NULL, 9);
+static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_voltage_label, NULL, 10);
+static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_voltage_label, NULL, 11);
+static SENSOR_DEVICE_ATTR(in13_label, S_IRUGO, show_voltage_label, NULL, 12);
+
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM2 | ADT7462_V0_ALARM);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM2 | ADT7462_V7_ALARM);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM2 | ADT7462_V2_ALARM);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM2 | ADT7462_V6_ALARM);
+static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM2 | ADT7462_V5_ALARM);
+static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM2 | ADT7462_V4_ALARM);
+static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM2 | ADT7462_V3_ALARM);
+static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM2 | ADT7462_V1_ALARM);
+static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM3 | ADT7462_V10_ALARM);
+static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM3 | ADT7462_V9_ALARM);
+static SENSOR_DEVICE_ATTR(in11_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM3 | ADT7462_V8_ALARM);
+static SENSOR_DEVICE_ATTR(in12_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM3 | ADT7462_V11_ALARM);
+static SENSOR_DEVICE_ATTR(in13_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM3 | ADT7462_V12_ALARM);
+
+static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min,
+                    set_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min,
+                    set_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min,
+                    set_fan_min, 2);
+static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min,
+                    set_fan_min, 3);
+static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min,
+                    set_fan_min, 4);
+static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO, show_fan_min,
+                    set_fan_min, 5);
+static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO, show_fan_min,
+                    set_fan_min, 6);
+static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO, show_fan_min,
+                    set_fan_min, 7);
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan, NULL, 7);
+
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM4 | ADT7462_F0_ALARM);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM4 | ADT7462_F1_ALARM);
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM4 | ADT7462_F2_ALARM);
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM4 | ADT7462_F3_ALARM);
+static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM4 | ADT7462_F4_ALARM);
+static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM4 | ADT7462_F5_ALARM);
+static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM4 | ADT7462_F6_ALARM);
+static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_alarm, NULL,
+                          ADT7462_ALARM4 | ADT7462_F7_ALARM);
+
+static SENSOR_DEVICE_ATTR(force_pwm_max, S_IWUSR | S_IRUGO,
+                    show_force_pwm_max, set_force_pwm_max, 0);
+
+static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2);
+static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO,
+                    show_pwm_min, set_pwm_min, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO,
+                    show_pwm_min, set_pwm_min, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO,
+                    show_pwm_min, set_pwm_min, 2);
+static SENSOR_DEVICE_ATTR(pwm4_auto_point1_pwm, S_IWUSR | S_IRUGO,
+                    show_pwm_min, set_pwm_min, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO,
+                    show_pwm_max, set_pwm_max, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO,
+                    show_pwm_max, set_pwm_max, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO,
+                    show_pwm_max, set_pwm_max, 2);
+static SENSOR_DEVICE_ATTR(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO,
+                    show_pwm_max, set_pwm_max, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_auto_point1_hyst, S_IWUSR | S_IRUGO,
+                    show_pwm_hyst, set_pwm_hyst, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_point1_hyst, S_IWUSR | S_IRUGO,
+                    show_pwm_hyst, set_pwm_hyst, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_point1_hyst, S_IWUSR | S_IRUGO,
+                    show_pwm_hyst, set_pwm_hyst, 2);
+static SENSOR_DEVICE_ATTR(temp4_auto_point1_hyst, S_IWUSR | S_IRUGO,
+                    show_pwm_hyst, set_pwm_hyst, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_auto_point2_hyst, S_IWUSR | S_IRUGO,
+                    show_pwm_hyst, set_pwm_hyst, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_point2_hyst, S_IWUSR | S_IRUGO,
+                    show_pwm_hyst, set_pwm_hyst, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_point2_hyst, S_IWUSR | S_IRUGO,
+                    show_pwm_hyst, set_pwm_hyst, 2);
+static SENSOR_DEVICE_ATTR(temp4_auto_point2_hyst, S_IWUSR | S_IRUGO,
+                    show_pwm_hyst, set_pwm_hyst, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO,
+                    show_pwm_tmin, set_pwm_tmin, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO,
+                    show_pwm_tmin, set_pwm_tmin, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO,
+                    show_pwm_tmin, set_pwm_tmin, 2);
+static SENSOR_DEVICE_ATTR(temp4_auto_point1_temp, S_IWUSR | S_IRUGO,
+                    show_pwm_tmin, set_pwm_tmin, 3);
+
+static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO,
+                    show_pwm_tmax, set_pwm_tmax, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO,
+                    show_pwm_tmax, set_pwm_tmax, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO,
+                    show_pwm_tmax, set_pwm_tmax, 2);
+static SENSOR_DEVICE_ATTR(temp4_auto_point2_temp, S_IWUSR | S_IRUGO,
+                    show_pwm_tmax, set_pwm_tmax, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
+                    set_pwm_auto, 0);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
+                    set_pwm_auto, 1);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
+                    set_pwm_auto, 2);
+static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_auto,
+                    set_pwm_auto, 3);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO,
+                    show_pwm_auto_temp, set_pwm_auto_temp, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO,
+                    show_pwm_auto_temp, set_pwm_auto_temp, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO,
+                    show_pwm_auto_temp, set_pwm_auto_temp, 2);
+static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IWUSR | S_IRUGO,
+                    show_pwm_auto_temp, set_pwm_auto_temp, 3);
+
+static struct attribute *adt7462_attr[] =
+{
+        &sensor_dev_attr_temp1_max.dev_attr.attr,
+        &sensor_dev_attr_temp2_max.dev_attr.attr,
+        &sensor_dev_attr_temp3_max.dev_attr.attr,
+        &sensor_dev_attr_temp4_max.dev_attr.attr,
+
+        &sensor_dev_attr_temp1_min.dev_attr.attr,
+        &sensor_dev_attr_temp2_min.dev_attr.attr,
+        &sensor_dev_attr_temp3_min.dev_attr.attr,
+        &sensor_dev_attr_temp4_min.dev_attr.attr,
+
+        &sensor_dev_attr_temp1_input.dev_attr.attr,
+        &sensor_dev_attr_temp2_input.dev_attr.attr,
+        &sensor_dev_attr_temp3_input.dev_attr.attr,
+        &sensor_dev_attr_temp4_input.dev_attr.attr,
+
+        &sensor_dev_attr_temp1_label.dev_attr.attr,
+        &sensor_dev_attr_temp2_label.dev_attr.attr,
+        &sensor_dev_attr_temp3_label.dev_attr.attr,
+        &sensor_dev_attr_temp4_label.dev_attr.attr,
+
+        &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp3_alarm.dev_attr.attr,
+        &sensor_dev_attr_temp4_alarm.dev_attr.attr,
+
+        &sensor_dev_attr_in1_max.dev_attr.attr,
+        &sensor_dev_attr_in2_max.dev_attr.attr,
+        &sensor_dev_attr_in3_max.dev_attr.attr,
+        &sensor_dev_attr_in4_max.dev_attr.attr,
+        &sensor_dev_attr_in5_max.dev_attr.attr,
+        &sensor_dev_attr_in6_max.dev_attr.attr,
+        &sensor_dev_attr_in7_max.dev_attr.attr,
+        &sensor_dev_attr_in8_max.dev_attr.attr,
+        &sensor_dev_attr_in9_max.dev_attr.attr,
+        &sensor_dev_attr_in10_max.dev_attr.attr,
+        &sensor_dev_attr_in11_max.dev_attr.attr,
+        &sensor_dev_attr_in12_max.dev_attr.attr,
+        &sensor_dev_attr_in13_max.dev_attr.attr,
+
+        &sensor_dev_attr_in1_min.dev_attr.attr,
+        &sensor_dev_attr_in2_min.dev_attr.attr,
+        &sensor_dev_attr_in3_min.dev_attr.attr,
+        &sensor_dev_attr_in4_min.dev_attr.attr,
+        &sensor_dev_attr_in5_min.dev_attr.attr,
+        &sensor_dev_attr_in6_min.dev_attr.attr,
+        &sensor_dev_attr_in7_min.dev_attr.attr,
+        &sensor_dev_attr_in8_min.dev_attr.attr,
+        &sensor_dev_attr_in9_min.dev_attr.attr,
+        &sensor_dev_attr_in10_min.dev_attr.attr,
+        &sensor_dev_attr_in11_min.dev_attr.attr,
+        &sensor_dev_attr_in12_min.dev_attr.attr,
+        &sensor_dev_attr_in13_min.dev_attr.attr,
+
+        &sensor_dev_attr_in1_input.dev_attr.attr,
+        &sensor_dev_attr_in2_input.dev_attr.attr,
+        &sensor_dev_attr_in3_input.dev_attr.attr,
+        &sensor_dev_attr_in4_input.dev_attr.attr,
+        &sensor_dev_attr_in5_input.dev_attr.attr,
+        &sensor_dev_attr_in6_input.dev_attr.attr,
+        &sensor_dev_attr_in7_input.dev_attr.attr,
+        &sensor_dev_attr_in8_input.dev_attr.attr,
+        &sensor_dev_attr_in9_input.dev_attr.attr,
+        &sensor_dev_attr_in10_input.dev_attr.attr,
+        &sensor_dev_attr_in11_input.dev_attr.attr,
+        &sensor_dev_attr_in12_input.dev_attr.attr,
+        &sensor_dev_attr_in13_input.dev_attr.attr,
+
+        &sensor_dev_attr_in1_label.dev_attr.attr,
+        &sensor_dev_attr_in2_label.dev_attr.attr,
+        &sensor_dev_attr_in3_label.dev_attr.attr,
+        &sensor_dev_attr_in4_label.dev_attr.attr,
+        &sensor_dev_attr_in5_label.dev_attr.attr,
+        &sensor_dev_attr_in6_label.dev_attr.attr,
+        &sensor_dev_attr_in7_label.dev_attr.attr,
+        &sensor_dev_attr_in8_label.dev_attr.attr,
+        &sensor_dev_attr_in9_label.dev_attr.attr,
+        &sensor_dev_attr_in10_label.dev_attr.attr,
+        &sensor_dev_attr_in11_label.dev_attr.attr,
+        &sensor_dev_attr_in12_label.dev_attr.attr,
+        &sensor_dev_attr_in13_label.dev_attr.attr,
+
+        &sensor_dev_attr_in1_alarm.dev_attr.attr,
+        &sensor_dev_attr_in2_alarm.dev_attr.attr,
+        &sensor_dev_attr_in3_alarm.dev_attr.attr,
+        &sensor_dev_attr_in4_alarm.dev_attr.attr,
+        &sensor_dev_attr_in5_alarm.dev_attr.attr,
+        &sensor_dev_attr_in6_alarm.dev_attr.attr,
+        &sensor_dev_attr_in7_alarm.dev_attr.attr,
+        &sensor_dev_attr_in8_alarm.dev_attr.attr,
+        &sensor_dev_attr_in9_alarm.dev_attr.attr,
+        &sensor_dev_attr_in10_alarm.dev_attr.attr,
+        &sensor_dev_attr_in11_alarm.dev_attr.attr,
+        &sensor_dev_attr_in12_alarm.dev_attr.attr,
+        &sensor_dev_attr_in13_alarm.dev_attr.attr,
+
+        &sensor_dev_attr_fan1_min.dev_attr.attr,
+        &sensor_dev_attr_fan2_min.dev_attr.attr,
+        &sensor_dev_attr_fan3_min.dev_attr.attr,
+        &sensor_dev_attr_fan4_min.dev_attr.attr,
+        &sensor_dev_attr_fan5_min.dev_attr.attr,
+        &sensor_dev_attr_fan6_min.dev_attr.attr,
+        &sensor_dev_attr_fan7_min.dev_attr.attr,
+        &sensor_dev_attr_fan8_min.dev_attr.attr,
+
+        &sensor_dev_attr_fan1_input.dev_attr.attr,
+        &sensor_dev_attr_fan2_input.dev_attr.attr,
+        &sensor_dev_attr_fan3_input.dev_attr.attr,
+        &sensor_dev_attr_fan4_input.dev_attr.attr,
+        &sensor_dev_attr_fan5_input.dev_attr.attr,
+        &sensor_dev_attr_fan6_input.dev_attr.attr,
+        &sensor_dev_attr_fan7_input.dev_attr.attr,
+        &sensor_dev_attr_fan8_input.dev_attr.attr,
+
+        &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan4_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan5_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan6_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan7_alarm.dev_attr.attr,
+        &sensor_dev_attr_fan8_alarm.dev_attr.attr,
+
+        &sensor_dev_attr_force_pwm_max.dev_attr.attr,
+        &sensor_dev_attr_pwm1.dev_attr.attr,
+        &sensor_dev_attr_pwm2.dev_attr.attr,
+        &sensor_dev_attr_pwm3.dev_attr.attr,
+        &sensor_dev_attr_pwm4.dev_attr.attr,
+
+        &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+        &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+        &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+        &sensor_dev_attr_pwm4_auto_point1_pwm.dev_attr.attr,
+
+        &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+        &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+        &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+        &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr,
+
+        &sensor_dev_attr_temp1_auto_point1_hyst.dev_attr.attr,
+        &sensor_dev_attr_temp2_auto_point1_hyst.dev_attr.attr,
+        &sensor_dev_attr_temp3_auto_point1_hyst.dev_attr.attr,
+        &sensor_dev_attr_temp4_auto_point1_hyst.dev_attr.attr,
+
+        &sensor_dev_attr_temp1_auto_point2_hyst.dev_attr.attr,
+        &sensor_dev_attr_temp2_auto_point2_hyst.dev_attr.attr,
+        &sensor_dev_attr_temp3_auto_point2_hyst.dev_attr.attr,
+        &sensor_dev_attr_temp4_auto_point2_hyst.dev_attr.attr,
+
+        &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
+        &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
+        &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr,
+        &sensor_dev_attr_temp4_auto_point1_temp.dev_attr.attr,
+
+        &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
+        &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
+        &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
+        &sensor_dev_attr_temp4_auto_point2_temp.dev_attr.attr,
+
+        &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+        &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+        &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+        &sensor_dev_attr_pwm4_enable.dev_attr.attr,
+
+        &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
+        &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
+        &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
+        &sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr,
+        NULL
+};
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adt7462_detect(struct i2c_client *client, int kind,
+                          struct i2c_board_info *info)
+{
+        struct i2c_adapter *adapter = client->adapter;
+
+        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+                return -ENODEV;
+
+        if (kind <= 0) {
+                int vendor, device, revision;
+
+                vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR);
+                if (vendor != ADT7462_VENDOR)
+                        return -ENODEV;
+
+                device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE);
+                if (device != ADT7462_DEVICE)
+                        return -ENODEV;
+
+                revision = i2c_smbus_read_byte_data(client,
+                                                    ADT7462_REG_REVISION);
+                if (revision != ADT7462_REVISION)
+                        return -ENODEV;
+        } else
+                dev_dbg(&adapter->dev, "detection forced\n");
+
+        strlcpy(info->type, "adt7462", I2C_NAME_SIZE);
+
+        return 0;
+}
+
+static int adt7462_probe(struct i2c_client *client,
+                         const struct i2c_device_id *id)
+{
+        struct adt7462_data *data;
+        int err;
+
+        data = kzalloc(sizeof(struct adt7462_data), GFP_KERNEL);
+        if (!data) {
+                err = -ENOMEM;
+                goto exit;
+        }
+
+        i2c_set_clientdata(client, data);
+        mutex_init(&data->lock);
+
+        dev_info(&client->dev, "%s chip found\n", client->name);
+
+        /* Register sysfs hooks */
+        data->attrs.attrs = adt7462_attr;
+        err = sysfs_create_group(&client->dev.kobj, &data->attrs);
+        if (err)
+                goto exit_free;
+
+        data->hwmon_dev = hwmon_device_register(&client->dev);
+        if (IS_ERR(data->hwmon_dev)) {
+                err = PTR_ERR(data->hwmon_dev);
+                goto exit_remove;
+        }
+
+        return 0;
+
+exit_remove:
+        sysfs_remove_group(&client->dev.kobj, &data->attrs);
+exit_free:
+        kfree(data);
+exit:
+        return err;
+}
+
+static int adt7462_remove(struct i2c_client *client)
+{
+        struct adt7462_data *data = i2c_get_clientdata(client);
+
+        hwmon_device_unregister(data->hwmon_dev);
+        sysfs_remove_group(&client->dev.kobj, &data->attrs);
+        kfree(data);
+        return 0;
+}
+
+static int __init adt7462_init(void)
+{
+        return i2c_add_driver(&adt7462_driver);
+}
+
+static void __exit adt7462_exit(void)
+{
+        i2c_del_driver(&adt7462_driver);
+}
+
+MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_DESCRIPTION("ADT7462 driver");
+MODULE_LICENSE("GPL");
+
+module_init(adt7462_init);
+module_exit(adt7462_exit);
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index d368d8f845e1..1311a595147e 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -137,6 +137,8 @@ I2C_CLIENT_INSMOD_1(adt7470);
 #define FAN_PERIOD_INVALID      65535
 #define FAN_DATA_VALID(x)       ((x) && (x) != FAN_PERIOD_INVALID)
 
+#define ROUND_DIV(x, divisor)   (((x) + ((divisor) / 2)) / (divisor))
+
 struct adt7470_data {
         struct device           *hwmon_dev;
         struct attribute_group  attrs;
@@ -353,7 +355,13 @@ static ssize_t set_temp_min(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7470_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10) / 1000;
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = ROUND_DIV(temp, 1000);
+        temp = SENSORS_LIMIT(temp, 0, 255);
 
         mutex_lock(&data->lock);
         data->temp_min[attr->index] = temp;
@@ -381,7 +389,13 @@ static ssize_t set_temp_max(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7470_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10) / 1000;
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = ROUND_DIV(temp, 1000);
+        temp = SENSORS_LIMIT(temp, 0, 255);
 
         mutex_lock(&data->lock);
         data->temp_max[attr->index] = temp;
@@ -430,11 +444,13 @@ static ssize_t set_fan_max(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7470_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10);
+        long temp;
 
-        if (!temp)
+        if (strict_strtol(buf, 10, &temp) || !temp)
                 return -EINVAL;
+
         temp = FAN_RPM_TO_PERIOD(temp);
+        temp = SENSORS_LIMIT(temp, 1, 65534);
 
         mutex_lock(&data->lock);
         data->fan_max[attr->index] = temp;
@@ -465,11 +481,13 @@ static ssize_t set_fan_min(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7470_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10);
+        long temp;
 
-        if (!temp)
+        if (strict_strtol(buf, 10, &temp) || !temp)
                 return -EINVAL;
+
         temp = FAN_RPM_TO_PERIOD(temp);
+        temp = SENSORS_LIMIT(temp, 1, 65534);
 
         mutex_lock(&data->lock);
         data->fan_min[attr->index] = temp;
@@ -507,9 +525,12 @@ static ssize_t set_force_pwm_max(struct device *dev,
 {
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7470_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10);
+        long temp;
         u8 reg;
 
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
         mutex_lock(&data->lock);
         data->force_pwm_max = temp;
         reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
@@ -537,7 +558,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7470_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = SENSORS_LIMIT(temp, 0, 255);
 
         mutex_lock(&data->lock);
         data->pwm[attr->index] = temp;
@@ -564,7 +590,12 @@ static ssize_t set_pwm_max(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7470_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = SENSORS_LIMIT(temp, 0, 255);
 
         mutex_lock(&data->lock);
         data->pwm_max[attr->index] = temp;
@@ -592,7 +623,12 @@ static ssize_t set_pwm_min(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7470_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = SENSORS_LIMIT(temp, 0, 255);
 
         mutex_lock(&data->lock);
         data->pwm_min[attr->index] = temp;
@@ -630,7 +666,13 @@ static ssize_t set_pwm_tmin(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7470_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10) / 1000;
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = ROUND_DIV(temp, 1000);
+        temp = SENSORS_LIMIT(temp, 0, 255);
 
         mutex_lock(&data->lock);
         data->pwm_tmin[attr->index] = temp;
@@ -658,11 +700,14 @@ static ssize_t set_pwm_auto(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7470_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10);
         int pwm_auto_reg = ADT7470_REG_PWM_CFG(attr->index);
         int pwm_auto_reg_mask;
+        long temp;
         u8 reg;
 
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
         if (attr->index % 2)
                 pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK;
         else
@@ -716,10 +761,14 @@ static ssize_t set_pwm_auto_temp(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7470_data *data = i2c_get_clientdata(client);
-        int temp = cvt_auto_temp(simple_strtol(buf, NULL, 10));
         int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index);
+        long temp;
         u8 reg;
 
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = cvt_auto_temp(temp);
         if (temp < 0)
                 return temp;
 
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index b9a8ea30c99c..18aa30866a6c 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -129,6 +129,8 @@ I2C_CLIENT_INSMOD_1(adt7473);
 #define FAN_PERIOD_INVALID      65535
 #define FAN_DATA_VALID(x)       ((x) && (x) != FAN_PERIOD_INVALID)
 
+#define ROUND_DIV(x, divisor)   (((x) + ((divisor) / 2)) / (divisor))
+
 struct adt7473_data {
         struct device           *hwmon_dev;
         struct attribute_group  attrs;
@@ -357,7 +359,12 @@ static ssize_t set_volt_min(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
-        int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10));
+        long volt;
+
+        if (strict_strtol(buf, 10, &volt))
+                return -EINVAL;
+
+        volt = encode_volt(attr->index, volt);
 
         mutex_lock(&data->lock);
         data->volt_min[attr->index] = volt;
@@ -386,7 +393,12 @@ static ssize_t set_volt_max(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
-        int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10));
+        long volt;
+
+        if (strict_strtol(buf, 10, &volt))
+                return -EINVAL;
+
+        volt = encode_volt(attr->index, volt);
 
         mutex_lock(&data->lock);
         data->volt_max[attr->index] = volt;
@@ -419,7 +431,8 @@ static int decode_temp(u8 twos_complement, u8 raw)
 
 static u8 encode_temp(u8 twos_complement, int cooked)
 {
-        return twos_complement ? cooked & 0xFF : cooked + 64;
+        u8 ret = twos_complement ? cooked & 0xFF : cooked + 64;
+        return SENSORS_LIMIT(ret, 0, 255);
 }
 
 static ssize_t show_temp_min(struct device *dev,
@@ -441,7 +454,12 @@ static ssize_t set_temp_min(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10) / 1000;
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = ROUND_DIV(temp, 1000);
         temp = encode_temp(data->temp_twos_complement, temp);
 
         mutex_lock(&data->lock);
@@ -472,7 +490,12 @@ static ssize_t set_temp_max(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10) / 1000;
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = ROUND_DIV(temp, 1000);
         temp = encode_temp(data->temp_twos_complement, temp);
 
         mutex_lock(&data->lock);
@@ -515,11 +538,13 @@ static ssize_t set_fan_min(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10);
+        long temp;
 
-        if (!temp)
+        if (strict_strtol(buf, 10, &temp) || !temp)
                 return -EINVAL;
+
         temp = FAN_RPM_TO_PERIOD(temp);
+        temp = SENSORS_LIMIT(temp, 1, 65534);
 
         mutex_lock(&data->lock);
         data->fan_min[attr->index] = temp;
@@ -558,7 +583,10 @@ static ssize_t set_max_duty_at_crit(struct device *dev,
         u8 reg;
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
 
         mutex_lock(&data->lock);
         data->max_duty_at_overheat = !!temp;
@@ -587,7 +615,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = SENSORS_LIMIT(temp, 0, 255);
 
         mutex_lock(&data->lock);
         data->pwm[attr->index] = temp;
@@ -614,7 +647,12 @@ static ssize_t set_pwm_max(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = SENSORS_LIMIT(temp, 0, 255);
 
         mutex_lock(&data->lock);
         data->pwm_max[attr->index] = temp;
@@ -642,7 +680,12 @@ static ssize_t set_pwm_min(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = SENSORS_LIMIT(temp, 0, 255);
 
         mutex_lock(&data->lock);
         data->pwm_min[attr->index] = temp;
@@ -672,7 +715,12 @@ static ssize_t set_temp_tmax(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10) / 1000;
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = ROUND_DIV(temp, 1000);
         temp = encode_temp(data->temp_twos_complement, temp);
 
         mutex_lock(&data->lock);
@@ -703,7 +751,12 @@ static ssize_t set_temp_tmin(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10) / 1000;
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
+
+        temp = ROUND_DIV(temp, 1000);
         temp = encode_temp(data->temp_twos_complement, temp);
 
         mutex_lock(&data->lock);
@@ -741,7 +794,10 @@ static ssize_t set_pwm_enable(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
 
         switch (temp) {
         case 0:
@@ -805,7 +861,10 @@ static ssize_t set_pwm_auto_temp(struct device *dev,
         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7473_data *data = i2c_get_clientdata(client);
-        int temp = simple_strtol(buf, NULL, 10);
+        long temp;
+
+        if (strict_strtol(buf, 10, &temp))
+                return -EINVAL;
 
         switch (temp) {
         case 1:
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index be3285912cb7..488e45cd43d7 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -1280,7 +1280,7 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
         { .accelerometer = 0, .light = 0, .temperature_set = 4 },
 /* iMac: temperature set 5 */
         { .accelerometer = 0, .light = 0, .temperature_set = 5 },
-/* MacBook3: accelerometer and temperature set 6 */
+/* MacBook3, MacBook4: accelerometer and temperature set 6 */
         { .accelerometer = 1, .light = 0, .temperature_set = 6 },
 /* MacBook Air: accelerometer, backlight and temperature set 7 */
         { .accelerometer = 1, .light = 1, .temperature_set = 7 },
@@ -1329,6 +1329,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
           DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
           DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") },
                 &applesmc_dmi_data[6]},
+        { applesmc_dmi_match, "Apple MacBook 4", {
+          DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+          DMI_MATCH(DMI_PRODUCT_NAME, "MacBook4") },
+                &applesmc_dmi_data[6]},
         { applesmc_dmi_match, "Apple MacBook 5", {
           DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
           DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5") },
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index 7b0ed5dea399..fe74609a7feb 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -88,9 +88,11 @@
 static DEFINE_IDR(aem_idr);
 static DEFINE_SPINLOCK(aem_idr_lock);
 
-static struct device_driver aem_driver = {
-        .name = DRVNAME,
-        .bus = &platform_bus_type,
+static struct platform_driver aem_driver = {
+        .driver = {
+                .name = DRVNAME,
+                .bus = &platform_bus_type,
+        }
 };
 
 struct aem_ipmi_data {
@@ -583,7 +585,7 @@ static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle)
         data->pdev = platform_device_alloc(DRVNAME, data->id);
         if (!data->pdev)
                 goto dev_err;
-        data->pdev->dev.driver = &aem_driver;
+        data->pdev->dev.driver = &aem_driver.driver;
 
         res = platform_device_add(data->pdev);
         if (res)
@@ -716,7 +718,7 @@ static int aem_init_aem2_inst(struct aem_ipmi_data *probe,
         data->pdev = platform_device_alloc(DRVNAME, data->id);
         if (!data->pdev)
                 goto dev_err;
-        data->pdev->dev.driver = &aem_driver;
+        data->pdev->dev.driver = &aem_driver.driver;
 
         res = platform_device_add(data->pdev);
         if (res)
@@ -1085,7 +1087,7 @@ static int __init aem_init(void)
 {
         int res;
 
-        res = driver_register(&aem_driver);
+        res = driver_register(&aem_driver.driver);
         if (res) {
                 printk(KERN_ERR "Can't register aem driver\n");
                 return res;
@@ -1097,7 +1099,7 @@ static int __init aem_init(void)
         return 0;
 
 ipmi_reg_err:
-        driver_unregister(&aem_driver);
+        driver_unregister(&aem_driver.driver);
         return res;
 
 }
@@ -1107,7 +1109,7 @@ static void __exit aem_exit(void)
         struct aem_data *p1, *next1;
 
         ipmi_smi_watcher_unregister(&driver_data.bmc_events);
-        driver_unregister(&aem_driver);
+        driver_unregister(&aem_driver.driver);
         list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list)
                 aem_delete(p1);
 }
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
new file mode 100644
index 000000000000..c002144c76bc
--- /dev/null
+++ b/drivers/hwmon/lis3lv02d.c
@@ -0,0 +1,581 @@
+/*
+ *  lis3lv02d.c - ST LIS3LV02DL accelerometer driver
+ *
+ *  Copyright (C) 2007-2008 Yan Burman
+ *  Copyright (C) 2008 Eric Piel
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/kthread.h>
+#include <linux/semaphore.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/poll.h>
+#include <linux/freezer.h>
+#include <linux/uaccess.h>
+#include <acpi/acpi_drivers.h>
+#include <asm/atomic.h>
+#include "lis3lv02d.h"
+
+#define DRIVER_NAME     "lis3lv02d"
+#define ACPI_MDPS_CLASS "accelerometer"
+
+/* joystick device poll interval in milliseconds */
+#define MDPS_POLL_INTERVAL 50
+/*
+ * The sensor can also generate interrupts (DRDY) but it's pretty pointless
+ * because their are generated even if the data do not change. So it's better
+ * to keep the interrupt for the free-fall event. The values are updated at
+ * 40Hz (at the lowest frequency), but as it can be pretty time consuming on
+ * some low processor, we poll the sensor only at 20Hz... enough for the
+ * joystick.
+ */
+
+/* Maximum value our axis may get for the input device (signed 12 bits) */
+#define MDPS_MAX_VAL 2048
+
+struct axis_conversion {
+        s8      x;
+        s8      y;
+        s8      z;
+};
+
+struct acpi_lis3lv02d {
+        struct acpi_device      *device;   /* The ACPI device */
+        struct input_dev        *idev;     /* input device */
+        struct task_struct      *kthread;  /* kthread for input */
+        struct mutex            lock;
+        struct platform_device  *pdev;     /* platform device */
+        atomic_t                count;     /* interrupt count after last read */
+        int                     xcalib;    /* calibrated null value for x */
+        int                     ycalib;    /* calibrated null value for y */
+        int                     zcalib;    /* calibrated null value for z */
+        unsigned char           is_on;     /* whether the device is on or off */
+        unsigned char           usage;     /* usage counter */
+        struct axis_conversion  ac;        /* hw -> logical axis */
+};
+
+static struct acpi_lis3lv02d adev;
+
+static int lis3lv02d_remove_fs(void);
+static int lis3lv02d_add_fs(struct acpi_device *device);
+
+/* For automatic insertion of the module */
+static struct acpi_device_id lis3lv02d_device_ids[] = {
+        {"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */
+        {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids);
+
+/**
+ * lis3lv02d_acpi_init - ACPI _INI method: initialize the device.
+ * @handle: the handle of the device
+ *
+ * Returns AE_OK on success.
+ */
+static inline acpi_status lis3lv02d_acpi_init(acpi_handle handle)
+{
+        return acpi_evaluate_object(handle, METHOD_NAME__INI, NULL, NULL);
+}
+
+/**
+ * lis3lv02d_acpi_read - ACPI ALRD method: read a register
+ * @handle: the handle of the device
+ * @reg:    the register to read
+ * @ret:    result of the operation
+ *
+ * Returns AE_OK on success.
+ */
+static acpi_status lis3lv02d_acpi_read(acpi_handle handle, int reg, u8 *ret)
+{
+        union acpi_object arg0 = { ACPI_TYPE_INTEGER };
+        struct acpi_object_list args = { 1, &arg0 };
+        unsigned long long lret;
+        acpi_status status;
+
+        arg0.integer.value = reg;
+
+        status = acpi_evaluate_integer(handle, "ALRD", &args, &lret);
+        *ret = lret;
+        return status;
+}
+
+/**
+ * lis3lv02d_acpi_write - ACPI ALWR method: write to a register
+ * @handle: the handle of the device
+ * @reg:    the register to write to
+ * @val:    the value to write
+ *
+ * Returns AE_OK on success.
+ */
+static acpi_status lis3lv02d_acpi_write(acpi_handle handle, int reg, u8 val)
+{
+        unsigned long long ret; /* Not used when writting */
+        union acpi_object in_obj[2];
+        struct acpi_object_list args = { 2, in_obj };
+
+        in_obj[0].type          = ACPI_TYPE_INTEGER;
+        in_obj[0].integer.value = reg;
+        in_obj[1].type          = ACPI_TYPE_INTEGER;
+        in_obj[1].integer.value = val;
+
+        return acpi_evaluate_integer(handle, "ALWR", &args, &ret);
+}
+
+static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
+{
+        u8 lo, hi;
+
+        lis3lv02d_acpi_read(handle, reg, &lo);
+        lis3lv02d_acpi_read(handle, reg + 1, &hi);
+        /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
+        return (s16)((hi << 8) | lo);
+}
+
+/**
+ * lis3lv02d_get_axis - For the given axis, give the value converted
+ * @axis:      1,2,3 - can also be negative
+ * @hw_values: raw values returned by the hardware
+ *
+ * Returns the converted value.
+ */
+static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3])
+{
+        if (axis > 0)
+                return hw_values[axis - 1];
+        else
+                return -hw_values[-axis - 1];
+}
+
+/**
+ * lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer
+ * @handle: the handle to the device
+ * @x:      where to store the X axis value
+ * @y:      where to store the Y axis value
+ * @z:      where to store the Z axis value
+ *
+ * Note that 40Hz input device can eat up about 10% CPU at 800MHZ
+ */
+static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z)
+{
+        int position[3];
+
+        position[0] = lis3lv02d_read_16(handle, OUTX_L);
+        position[1] = lis3lv02d_read_16(handle, OUTY_L);
+        position[2] = lis3lv02d_read_16(handle, OUTZ_L);
+
+        *x = lis3lv02d_get_axis(adev.ac.x, position);
+        *y = lis3lv02d_get_axis(adev.ac.y, position);
+        *z = lis3lv02d_get_axis(adev.ac.z, position);
+}
+
+static inline void lis3lv02d_poweroff(acpi_handle handle)
+{
+        adev.is_on = 0;
+        /* disable X,Y,Z axis and power down */
+        lis3lv02d_acpi_write(handle, CTRL_REG1, 0x00);
+}
+
+static void lis3lv02d_poweron(acpi_handle handle)
+{
+        u8 val;
+
+        adev.is_on = 1;
+        lis3lv02d_acpi_init(handle);
+        lis3lv02d_acpi_write(handle, FF_WU_CFG, 0);
+        /*
+         * BDU: LSB and MSB values are not updated until both have been read.
+         *      So the value read will always be correct.
+         * IEN: Interrupt for free-fall and DD, not for data-ready.
+         */
+        lis3lv02d_acpi_read(handle, CTRL_REG2, &val);
+        val |= CTRL2_BDU | CTRL2_IEN;
+        lis3lv02d_acpi_write(handle, CTRL_REG2, val);
+}
+
+#ifdef CONFIG_PM
+static int lis3lv02d_suspend(struct acpi_device *device, pm_message_t state)
+{
+        /* make sure the device is off when we suspend */
+        lis3lv02d_poweroff(device->handle);
+        return 0;
+}
+
+static int lis3lv02d_resume(struct acpi_device *device)
+{
+        /* put back the device in the right state (ACPI might turn it on) */
+        mutex_lock(&adev.lock);
+        if (adev.usage > 0)
+                lis3lv02d_poweron(device->handle);
+        else
+                lis3lv02d_poweroff(device->handle);
+        mutex_unlock(&adev.lock);
+        return 0;
+}
+#else
+#define lis3lv02d_suspend NULL
+#define lis3lv02d_resume NULL
+#endif
+
+
+/*
+ * To be called before starting to use the device. It makes sure that the
+ * device will always be on until a call to lis3lv02d_decrease_use(). Not to be
+ * used from interrupt context.
+ */
+static void lis3lv02d_increase_use(struct acpi_lis3lv02d *dev)
+{
+        mutex_lock(&dev->lock);
+        dev->usage++;
+        if (dev->usage == 1) {
+                if (!dev->is_on)
+                        lis3lv02d_poweron(dev->device->handle);
+        }
+        mutex_unlock(&dev->lock);
+}
+
+/*
+ * To be called whenever a usage of the device is stopped.
+ * It will make sure to turn off the device when there is not usage.
+ */
+static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev)
+{
+        mutex_lock(&dev->lock);
+        dev->usage--;
+        if (dev->usage == 0)
+                lis3lv02d_poweroff(dev->device->handle);
+        mutex_unlock(&dev->lock);
+}
+
+/**
+ * lis3lv02d_joystick_kthread - Kthread polling function
+ * @data: unused - here to conform to threadfn prototype
+ */
+static int lis3lv02d_joystick_kthread(void *data)
+{
+        int x, y, z;
+
+        while (!kthread_should_stop()) {
+                lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z);
+                input_report_abs(adev.idev, ABS_X, x - adev.xcalib);
+                input_report_abs(adev.idev, ABS_Y, y - adev.ycalib);
+                input_report_abs(adev.idev, ABS_Z, z - adev.zcalib);
+
+                input_sync(adev.idev);
+
+                try_to_freeze();
+                msleep_interruptible(MDPS_POLL_INTERVAL);
+        }
+
+        return 0;
+}
+
+static int lis3lv02d_joystick_open(struct input_dev *input)
+{
+        lis3lv02d_increase_use(&adev);
+        adev.kthread = kthread_run(lis3lv02d_joystick_kthread, NULL, "klis3lv02d");
+        if (IS_ERR(adev.kthread)) {
+                lis3lv02d_decrease_use(&adev);
+                return PTR_ERR(adev.kthread);
+        }
+
+        return 0;
+}
+
+static void lis3lv02d_joystick_close(struct input_dev *input)
+{
+        kthread_stop(adev.kthread);
+        lis3lv02d_decrease_use(&adev);
+}
+
+
+static inline void lis3lv02d_calibrate_joystick(void)
+{
+        lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib);
+}
+
+static int lis3lv02d_joystick_enable(void)
+{
+        int err;
+
+        if (adev.idev)
+                return -EINVAL;
+
+        adev.idev = input_allocate_device();
+        if (!adev.idev)
+                return -ENOMEM;
+
+        lis3lv02d_calibrate_joystick();
+
+        adev.idev->name       = "ST LIS3LV02DL Accelerometer";
+        adev.idev->phys       = DRIVER_NAME "/input0";
+        adev.idev->id.bustype = BUS_HOST;
+        adev.idev->id.vendor  = 0;
+        adev.idev->dev.parent = &adev.pdev->dev;
+        adev.idev->open       = lis3lv02d_joystick_open;
+        adev.idev->close      = lis3lv02d_joystick_close;
+
+        set_bit(EV_ABS, adev.idev->evbit);
+        input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
+        input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
+        input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
+
+        err = input_register_device(adev.idev);
+        if (err) {
+                input_free_device(adev.idev);
+                adev.idev = NULL;
+        }
+
+        return err;
+}
+
+static void lis3lv02d_joystick_disable(void)
+{
+        if (!adev.idev)
+                return;
+
+        input_unregister_device(adev.idev);
+        adev.idev = NULL;
+}
+
+
+/*
+ * Initialise the accelerometer and the various subsystems.
+ * Should be rather independant of the bus system.
+ */
+static int lis3lv02d_init_device(struct acpi_lis3lv02d *dev)
+{
+        mutex_init(&dev->lock);
+        lis3lv02d_add_fs(dev->device);
+        lis3lv02d_increase_use(dev);
+
+        if (lis3lv02d_joystick_enable())
+                printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
+
+        lis3lv02d_decrease_use(dev);
+        return 0;
+}
+
+static int lis3lv02d_dmi_matched(const struct dmi_system_id *dmi)
+{
+        adev.ac = *((struct axis_conversion *)dmi->driver_data);
+        printk(KERN_INFO DRIVER_NAME ": hardware type %s found.\n", dmi->ident);
+
+        return 1;
+}
+
+/* Represents, for each axis seen by userspace, the corresponding hw axis (+1).
+ * If the value is negative, the opposite of the hw value is used. */
+static struct axis_conversion lis3lv02d_axis_normal = {1, 2, 3};
+static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3};
+static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3};
+static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3};
+static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3};
+static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3};
+
+#define AXIS_DMI_MATCH(_ident, _name, _axis) {          \
+        .ident = _ident,                                \
+        .callback = lis3lv02d_dmi_matched,              \
+        .matches = {                                    \
+                DMI_MATCH(DMI_PRODUCT_NAME, _name)      \
+        },                                              \
+        .driver_data = &lis3lv02d_axis_##_axis          \
+}
+static struct dmi_system_id lis3lv02d_dmi_ids[] = {
+        /* product names are truncated to match all kinds of a same model */
+        AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted),
+        AXIS_DMI_MATCH("NC84x0", "HP Compaq nc84", z_inverted),
+        AXIS_DMI_MATCH("NX9420", "HP Compaq nx9420", x_inverted),
+        AXIS_DMI_MATCH("NW9440", "HP Compaq nw9440", x_inverted),
+        AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted),
+        AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted),
+        AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left),
+        { NULL, }
+/* Laptop models without axis info (yet):
+ * "NC651xx" "HP Compaq 651"
+ * "NC671xx" "HP Compaq 671"
+ * "NC6910" "HP Compaq 6910"
+ * HP Compaq 8710x Notebook PC / Mobile Workstation
+ * "NC2400" "HP Compaq nc2400"
+ * "NX74x0" "HP Compaq nx74"
+ * "NX6325" "HP Compaq nx6325"
+ * "NC4400" "HP Compaq nc4400"
+ */
+};
+
+static int lis3lv02d_add(struct acpi_device *device)
+{
+        u8 val;
+
+        if (!device)
+                return -EINVAL;
+
+        adev.device = device;
+        strcpy(acpi_device_name(device), DRIVER_NAME);
+        strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
+        device->driver_data = &adev;
+
+        lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val);
+        if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) {
+                printk(KERN_ERR DRIVER_NAME
+                                ": Accelerometer chip not LIS3LV02D{L,Q}\n");
+        }
+
+        /* If possible use a "standard" axes order */
+        if (dmi_check_system(lis3lv02d_dmi_ids) == 0) {
+                printk(KERN_INFO DRIVER_NAME ": laptop model unknown, "
+                                 "using default axes configuration\n");
+                adev.ac = lis3lv02d_axis_normal;
+        }
+
+        return lis3lv02d_init_device(&adev);
+}
+
+static int lis3lv02d_remove(struct acpi_device *device, int type)
+{
+        if (!device)
+                return -EINVAL;
+
+        lis3lv02d_joystick_disable();
+        lis3lv02d_poweroff(device->handle);
+
+        return lis3lv02d_remove_fs();
+}
+
+
+/* Sysfs stuff */
+static ssize_t lis3lv02d_position_show(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        int x, y, z;
+
+        lis3lv02d_increase_use(&adev);
+        lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z);
+        lis3lv02d_decrease_use(&adev);
+        return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
+}
+
+static ssize_t lis3lv02d_calibrate_show(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        return sprintf(buf, "(%d,%d,%d)\n", adev.xcalib, adev.ycalib, adev.zcalib);
+}
+
+static ssize_t lis3lv02d_calibrate_store(struct device *dev,
+                                struct device_attribute *attr,
+                                const char *buf, size_t count)
+{
+        lis3lv02d_increase_use(&adev);
+        lis3lv02d_calibrate_joystick();
+        lis3lv02d_decrease_use(&adev);
+        return count;
+}
+
+/* conversion btw sampling rate and the register values */
+static int lis3lv02dl_df_val[4] = {40, 160, 640, 2560};
+static ssize_t lis3lv02d_rate_show(struct device *dev,
+                        struct device_attribute *attr, char *buf)
+{
+        u8 ctrl;
+        int val;
+
+        lis3lv02d_increase_use(&adev);
+        lis3lv02d_acpi_read(adev.device->handle, CTRL_REG1, &ctrl);
+        lis3lv02d_decrease_use(&adev);
+        val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4;
+        return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]);
+}
+
+static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL);
+static DEVICE_ATTR(calibrate, S_IRUGO|S_IWUSR, lis3lv02d_calibrate_show,
+        lis3lv02d_calibrate_store);
+static DEVICE_ATTR(rate, S_IRUGO, lis3lv02d_rate_show, NULL);
+
+static struct attribute *lis3lv02d_attributes[] = {
+        &dev_attr_position.attr,
+        &dev_attr_calibrate.attr,
+        &dev_attr_rate.attr,
+        NULL
+};
+
+static struct attribute_group lis3lv02d_attribute_group = {
+        .attrs = lis3lv02d_attributes
+};
+
+static int lis3lv02d_add_fs(struct acpi_device *device)
+{
+        adev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
+        if (IS_ERR(adev.pdev))
+                return PTR_ERR(adev.pdev);
+
+        return sysfs_create_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group);
+}
+
+static int lis3lv02d_remove_fs(void)
+{
+        sysfs_remove_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group);
+        platform_device_unregister(adev.pdev);
+        return 0;
+}
+
+/* For the HP MDPS aka 3D Driveguard */
+static struct acpi_driver lis3lv02d_driver = {
+        .name  = DRIVER_NAME,
+        .class = ACPI_MDPS_CLASS,
+        .ids   = lis3lv02d_device_ids,
+        .ops = {
+                .add     = lis3lv02d_add,
+                .remove  = lis3lv02d_remove,
+                .suspend = lis3lv02d_suspend,
+                .resume  = lis3lv02d_resume,
+        }
+};
+
+static int __init lis3lv02d_init_module(void)
+{
+        int ret;
+
+        if (acpi_disabled)
+                return -ENODEV;
+
+        ret = acpi_bus_register_driver(&lis3lv02d_driver);
+        if (ret < 0)
+                return ret;
+
+        printk(KERN_INFO DRIVER_NAME " driver loaded.\n");
+
+        return 0;
+}
+
+static void __exit lis3lv02d_exit_module(void)
+{
+        acpi_bus_unregister_driver(&lis3lv02d_driver);
+}
+
+MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver");
+MODULE_AUTHOR("Yan Burman and Eric Piel");
+MODULE_LICENSE("GPL");
+
+module_init(lis3lv02d_init_module);
+module_exit(lis3lv02d_exit_module);
diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
new file mode 100644
index 000000000000..330cfc60e948
--- /dev/null
+++ b/drivers/hwmon/lis3lv02d.h
@@ -0,0 +1,149 @@
+/*
+ *  lis3lv02d.h - ST LIS3LV02DL accelerometer driver
+ *
+ *  Copyright (C) 2007-2008 Yan Burman
+ *  Copyright (C) 2008 Eric Piel
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to
+ * be connected via SPI. There exists also several similar chips (such as LIS302DL or
+ * LIS3L02DQ) but not in the HP laptops and they have slightly different registers.
+ * They can also be connected via I²C.
+ */
+
+#define LIS3LV02DL_ID   0x3A /* Also the LIS3LV02DQ */
+#define LIS302DL_ID     0x3B /* Also the LIS202DL! */
+
+enum lis3lv02d_reg {
+        WHO_AM_I        = 0x0F,
+        OFFSET_X        = 0x16,
+        OFFSET_Y        = 0x17,
+        OFFSET_Z        = 0x18,
+        GAIN_X          = 0x19,
+        GAIN_Y          = 0x1A,
+        GAIN_Z          = 0x1B,
+        CTRL_REG1       = 0x20,
+        CTRL_REG2       = 0x21,
+        CTRL_REG3       = 0x22,
+        HP_FILTER_RESET = 0x23,
+        STATUS_REG      = 0x27,
+        OUTX_L          = 0x28,
+        OUTX_H          = 0x29,
+        OUTY_L          = 0x2A,
+        OUTY_H          = 0x2B,
+        OUTZ_L          = 0x2C,
+        OUTZ_H          = 0x2D,
+        FF_WU_CFG       = 0x30,
+        FF_WU_SRC       = 0x31,
+        FF_WU_ACK       = 0x32,
+        FF_WU_THS_L     = 0x34,
+        FF_WU_THS_H     = 0x35,
+        FF_WU_DURATION  = 0x36,
+        DD_CFG          = 0x38,
+        DD_SRC          = 0x39,
+        DD_ACK          = 0x3A,
+        DD_THSI_L       = 0x3C,
+        DD_THSI_H       = 0x3D,
+        DD_THSE_L       = 0x3E,
+        DD_THSE_H       = 0x3F,
+};
+
+enum lis3lv02d_ctrl1 {
+        CTRL1_Xen       = 0x01,
+        CTRL1_Yen       = 0x02,
+        CTRL1_Zen       = 0x04,
+        CTRL1_ST        = 0x08,
+        CTRL1_DF0       = 0x10,
+        CTRL1_DF1       = 0x20,
+        CTRL1_PD0       = 0x40,
+        CTRL1_PD1       = 0x80,
+};
+enum lis3lv02d_ctrl2 {
+        CTRL2_DAS       = 0x01,
+        CTRL2_SIM       = 0x02,
+        CTRL2_DRDY      = 0x04,
+        CTRL2_IEN       = 0x08,
+        CTRL2_BOOT      = 0x10,
+        CTRL2_BLE       = 0x20,
+        CTRL2_BDU       = 0x40, /* Block Data Update */
+        CTRL2_FS        = 0x80, /* Full Scale selection */
+};
+
+
+enum lis3lv02d_ctrl3 {
+        CTRL3_CFS0      = 0x01,
+        CTRL3_CFS1      = 0x02,
+        CTRL3_FDS       = 0x10,
+        CTRL3_HPFF      = 0x20,
+        CTRL3_HPDD      = 0x40,
+        CTRL3_ECK       = 0x80,
+};
+
+enum lis3lv02d_status_reg {
+        STATUS_XDA      = 0x01,
+        STATUS_YDA      = 0x02,
+        STATUS_ZDA      = 0x04,
+        STATUS_XYZDA    = 0x08,
+        STATUS_XOR      = 0x10,
+        STATUS_YOR      = 0x20,
+        STATUS_ZOR      = 0x40,
+        STATUS_XYZOR    = 0x80,
+};
+
+enum lis3lv02d_ff_wu_cfg {
+        FF_WU_CFG_XLIE  = 0x01,
+        FF_WU_CFG_XHIE  = 0x02,
+        FF_WU_CFG_YLIE  = 0x04,
+        FF_WU_CFG_YHIE  = 0x08,
+        FF_WU_CFG_ZLIE  = 0x10,
+        FF_WU_CFG_ZHIE  = 0x20,
+        FF_WU_CFG_LIR   = 0x40,
+        FF_WU_CFG_AOI   = 0x80,
+};
+
+enum lis3lv02d_ff_wu_src {
+        FF_WU_SRC_XL    = 0x01,
+        FF_WU_SRC_XH    = 0x02,
+        FF_WU_SRC_YL    = 0x04,
+        FF_WU_SRC_YH    = 0x08,
+        FF_WU_SRC_ZL    = 0x10,
+        FF_WU_SRC_ZH    = 0x20,
+        FF_WU_SRC_IA    = 0x40,
+};
+
+enum lis3lv02d_dd_cfg {
+        DD_CFG_XLIE     = 0x01,
+        DD_CFG_XHIE     = 0x02,
+        DD_CFG_YLIE     = 0x04,
+        DD_CFG_YHIE     = 0x08,
+        DD_CFG_ZLIE     = 0x10,
+        DD_CFG_ZHIE     = 0x20,
+        DD_CFG_LIR      = 0x40,
+        DD_CFG_IEND     = 0x80,
+};
+
+enum lis3lv02d_dd_src {
+        DD_SRC_XL       = 0x01,
+        DD_SRC_XH       = 0x02,
+        DD_SRC_YL       = 0x04,
+        DD_SRC_YH       = 0x08,
+        DD_SRC_ZL       = 0x10,
+        DD_SRC_ZH       = 0x20,
+        DD_SRC_IA       = 0x40,
+};
+
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 3ff0285396fa..cfc1ee90f5a3 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -39,7 +39,8 @@
 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
 /* Insmod parameters */
-I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
+I2C_CLIENT_INSMOD_7(lm85b, lm85c, adm1027, adt7463, adt7468, emc6d100,
+                    emc6d102);
 
 /* The LM85 registers */
 
@@ -59,6 +60,12 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
 
 #define LM85_REG_COMPANY                0x3e
 #define LM85_REG_VERSTEP                0x3f
+
+#define ADT7468_REG_CFG5                0x7c
+#define         ADT7468_OFF64           0x01
+#define IS_ADT7468_OFF64(data)          \
+        ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_OFF64))
+
 /* These are the recognized values for the above regs */
 #define LM85_COMPANY_NATIONAL           0x01
 #define LM85_COMPANY_ANALOG_DEV         0x41
@@ -70,6 +77,8 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
 #define LM85_VERSTEP_ADM1027            0x60
 #define LM85_VERSTEP_ADT7463            0x62
 #define LM85_VERSTEP_ADT7463C           0x6A
+#define LM85_VERSTEP_ADT7468_1          0x71
+#define LM85_VERSTEP_ADT7468_2          0x72
 #define LM85_VERSTEP_EMC6D100_A0        0x60
 #define LM85_VERSTEP_EMC6D100_A1        0x61
 #define LM85_VERSTEP_EMC6D102           0x65
@@ -306,6 +315,7 @@ struct lm85_data {
         u8 vid;                 /* Register value */
         u8 vrm;                 /* VRM version */
         u32 alarms;             /* Register encoding, combined */
+        u8 cfg5;                /* Config Register 5 on ADT7468 */
         struct lm85_autofan autofan[3];
         struct lm85_zone zone[3];
 };
@@ -685,6 +695,9 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
         struct lm85_data *data = i2c_get_clientdata(client);
         long val = simple_strtol(buf, NULL, 10);
 
+        if (IS_ADT7468_OFF64(data))
+                val += 64;
+
         mutex_lock(&data->update_lock);
         data->temp_min[nr] = TEMP_TO_REG(val);
         lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]);
@@ -708,6 +721,9 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
         struct lm85_data *data = i2c_get_clientdata(client);
         long val = simple_strtol(buf, NULL, 10);
 
+        if (IS_ADT7468_OFF64(data))
+                val += 64;
+
         mutex_lock(&data->update_lock);
         data->temp_max[nr] = TEMP_TO_REG(val);
         lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]);
@@ -1163,6 +1179,10 @@ static int lm85_detect(struct i2c_client *client, int kind,
                         case LM85_VERSTEP_ADT7463C:
                                 kind = adt7463;
                                 break;
+                        case LM85_VERSTEP_ADT7468_1:
+                        case LM85_VERSTEP_ADT7468_2:
+                                kind = adt7468;
+                                break;
                         }
                 } else if (company == LM85_COMPANY_SMSC) {
                         switch (verstep) {
@@ -1195,6 +1215,9 @@ static int lm85_detect(struct i2c_client *client, int kind,
         case adt7463:
                 type_name = "adt7463";
                 break;
+        case adt7468:
+                type_name = "adt7468";
+                break;
         case emc6d100:
                 type_name = "emc6d100";
                 break;
@@ -1246,10 +1269,11 @@ static int lm85_probe(struct i2c_client *client,
         if (err)
                 goto err_kfree;
 
-        /* The ADT7463 has an optional VRM 10 mode where pin 21 is used
+        /* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used
            as a sixth digital VID input rather than an analog input. */
         data->vid = lm85_read_value(client, LM85_REG_VID);
-        if (!(data->type == adt7463 && (data->vid & 0x80)))
+        if (!((data->type == adt7463 || data->type == adt7468) &&
+            (data->vid & 0x80)))
                 if ((err = sysfs_create_group(&client->dev.kobj,
                                         &lm85_group_in4)))
                         goto err_remove_files;
@@ -1357,7 +1381,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
                  * There are 2 additional resolution bits per channel and we
                  * have room for 4, so we shift them to the left.
                  */
-                if (data->type == adm1027 || data->type == adt7463) {
+                if (data->type == adm1027 || data->type == adt7463 ||
+                    data->type == adt7468) {
                         int ext1 = lm85_read_value(client,
                                                    ADM1027_REG_EXTEND_ADC1);
                         int ext2 =  lm85_read_value(client,
@@ -1382,16 +1407,23 @@ static struct lm85_data *lm85_update_device(struct device *dev)
                             lm85_read_value(client, LM85_REG_FAN(i));
                 }
 
-                if (!(data->type == adt7463 && (data->vid & 0x80))) {
+                if (!((data->type == adt7463 || data->type == adt7468) &&
+                    (data->vid & 0x80))) {
                         data->in[4] = lm85_read_value(client,
                                       LM85_REG_IN(4));
                 }
 
+                if (data->type == adt7468)
+                        data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5);
+
                 for (i = 0; i <= 2; ++i) {
                         data->temp[i] =
                             lm85_read_value(client, LM85_REG_TEMP(i));
                         data->pwm[i] =
                             lm85_read_value(client, LM85_REG_PWM(i));
+
+                        if (IS_ADT7468_OFF64(data))
+                                data->temp[i] -= 64;
                 }
 
                 data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
@@ -1446,7 +1478,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
                             lm85_read_value(client, LM85_REG_FAN_MIN(i));
                 }
 
-                if (!(data->type == adt7463 && (data->vid & 0x80))) {
+                if (!((data->type == adt7463 || data->type == adt7468) &&
+                    (data->vid & 0x80))) {
                         data->in_min[4] = lm85_read_value(client,
                                           LM85_REG_IN_MIN(4));
                         data->in_max[4] = lm85_read_value(client,
@@ -1481,6 +1514,13 @@ static struct lm85_data *lm85_update_device(struct device *dev)
                             lm85_read_value(client, LM85_REG_AFAN_LIMIT(i));
                         data->zone[i].critical =
                             lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i));
+
+                        if (IS_ADT7468_OFF64(data)) {
+                                data->temp_min[i] -= 64;
+                                data->temp_max[i] -= 64;
+                                data->zone[i].limit -= 64;
+                                data->zone[i].critical -= 64;
+                        }
                 }
 
                 i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 640cbb237328..3384a717fec0 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -318,7 +318,8 @@ static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
                 } else
                         data = i2c_op(pd, OP_RX, 0);
 
-                pd->msg->buf[real_pos] = data;
+                if (real_pos >= 0)
+                        pd->msg->buf[real_pos] = data;
         } while (0);
 
         pd->pos++;
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index cb199c815b53..f50210fe558f 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -444,6 +444,7 @@ static struct pcmcia_device_id ide_ids[] = {
         PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
         PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
         PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
+        PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506),
         PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, ide_ids);
diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig
index 108264de0ac9..f15e90a453d1 100644
--- a/drivers/idle/Kconfig
+++ b/drivers/idle/Kconfig
@@ -1,5 +1,6 @@
 
 menu "Memory power savings"
+depends on X86_64
 
 config I7300_IDLE_IOAT_CHANNEL
         bool
@@ -7,7 +8,7 @@ config I7300_IDLE_IOAT_CHANNEL
 config I7300_IDLE
         tristate "Intel chipset idle memory power saving driver"
         select I7300_IDLE_IOAT_CHANNEL
-        depends on X86_64 && EXPERIMENTAL
+        depends on EXPERIMENTAL
         help
           Enable memory power savings when idle with certain Intel server
           chipsets. The chipset must have I/O AT support, such as the
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index ecff98043589..160ef482712d 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -1102,9 +1102,7 @@ static u64 fw_vers_string_to_u64(struct iwch_dev *iwch_dev)
         char *cp, *next;
         unsigned fw_maj, fw_min, fw_mic;
 
-        rtnl_lock();
         lldev->ethtool_ops->get_drvinfo(lldev, &info);
-        rtnl_unlock();
 
         next = info.fw_version + 1;
         cp = strsep(&next, ".");
@@ -1192,9 +1190,7 @@ static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, ch
         struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev;
 
         PDBG("%s dev 0x%p\n", __func__, dev);
-        rtnl_lock();
         lldev->ethtool_ops->get_drvinfo(lldev, &info);
-        rtnl_unlock();
         return sprintf(buf, "%s\n", info.fw_version);
 }
 
@@ -1207,9 +1203,7 @@ static ssize_t show_hca(struct device *dev, struct device_attribute *attr,
         struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev;
 
         PDBG("%s dev 0x%p\n", __func__, dev);
-        rtnl_lock();
         lldev->ethtool_ops->get_drvinfo(lldev, &info);
-        rtnl_unlock();
         return sprintf(buf, "%s\n", info.driver);
 }
 
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index 3e4585c2318a..19661b2f0406 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -745,7 +745,6 @@ int iwch_post_zb_read(struct iwch_qp *qhp)
         wqe->read.rdmaop = T3_READ_REQ;
         wqe->read.reserved[0] = 0;
         wqe->read.reserved[1] = 0;
-        wqe->read.reserved[2] = 0;
         wqe->read.rem_stag = cpu_to_be32(1);
         wqe->read.rem_to = cpu_to_be64(1);
         wqe->read.local_stag = cpu_to_be32(1);
diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c
index cb55be04442c..757035ea246f 100644
--- a/drivers/infiniband/hw/ehca/ehca_irq.c
+++ b/drivers/infiniband/hw/ehca/ehca_irq.c
@@ -359,36 +359,48 @@ static void notify_port_conf_change(struct ehca_shca *shca, int port_num)
         *old_attr = new_attr;
 }
 
+/* replay modify_qp for sqps -- return 0 if all is well, 1 if AQP1 destroyed */
+static int replay_modify_qp(struct ehca_sport *sport)
+{
+        int aqp1_destroyed;
+        unsigned long flags;
+
+        spin_lock_irqsave(&sport->mod_sqp_lock, flags);
+
+        aqp1_destroyed = !sport->ibqp_sqp[IB_QPT_GSI];
+
+        if (sport->ibqp_sqp[IB_QPT_SMI])
+                ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]);
+        if (!aqp1_destroyed)
+                ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]);
+
+        spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
+
+        return aqp1_destroyed;
+}
+
 static void parse_ec(struct ehca_shca *shca, u64 eqe)
 {
         u8 ec   = EHCA_BMASK_GET(NEQE_EVENT_CODE, eqe);
         u8 port = EHCA_BMASK_GET(NEQE_PORT_NUMBER, eqe);
         u8 spec_event;
         struct ehca_sport *sport = &shca->sport[port - 1];
-        unsigned long flags;
 
         switch (ec) {
         case 0x30: /* port availability change */
                 if (EHCA_BMASK_GET(NEQE_PORT_AVAILABILITY, eqe)) {
-                        int suppress_event;
-                        /* replay modify_qp for sqps */
-                        spin_lock_irqsave(&sport->mod_sqp_lock, flags);
-                        suppress_event = !sport->ibqp_sqp[IB_QPT_GSI];
-                        if (sport->ibqp_sqp[IB_QPT_SMI])
-                                ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]);
-                        if (!suppress_event)
-                                ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]);
-                        spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
-
-                        /* AQP1 was destroyed, ignore this event */
-                        if (suppress_event)
-                                break;
+                        /* only replay modify_qp calls in autodetect mode;
+                         * if AQP1 was destroyed, the port is already down
+                         * again and we can drop the event.
+                         */
+                        if (ehca_nr_ports < 0)
+                                if (replay_modify_qp(sport))
+                                        break;
 
                         sport->port_state = IB_PORT_ACTIVE;
                         dispatch_port_event(shca, port, IB_EVENT_PORT_ACTIVE,
                                             "is active");
-                        ehca_query_sma_attr(shca, port,
-                                            &sport->saved_attr);
+                        ehca_query_sma_attr(shca, port, &sport->saved_attr);
                 } else {
                         sport->port_state = IB_PORT_DOWN;
                         dispatch_port_event(shca, port, IB_EVENT_PORT_ERR,
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index 4d54b9f64567..9e05ee2db39b 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -860,6 +860,11 @@ static struct ehca_qp *internal_create_qp(
         if (qp_type == IB_QPT_GSI) {
                 h_ret = ehca_define_sqp(shca, my_qp, init_attr);
                 if (h_ret != H_SUCCESS) {
+                        kfree(my_qp->mod_qp_parm);
+                        my_qp->mod_qp_parm = NULL;
+                        /* the QP pointer is no longer valid */
+                        shca->sport[init_attr->port_num - 1].ibqp_sqp[qp_type] =
+                                NULL;
                         ret = ehca2ib_return_code(h_ret);
                         goto create_qp_exit6;
                 }
diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c
index fc0f6d9e6030..2296832f94da 100644
--- a/drivers/infiniband/hw/ipath/ipath_ruc.c
+++ b/drivers/infiniband/hw/ipath/ipath_ruc.c
@@ -156,7 +156,7 @@ bail:
 /**
  * ipath_get_rwqe - copy the next RWQE into the QP's RWQE
  * @qp: the QP
- * @wr_id_only: update wr_id only, not SGEs
+ * @wr_id_only: update qp->r_wr_id only, not qp->r_sge
  *
  * Return 0 if no RWQE is available, otherwise return 1.
  *
@@ -173,8 +173,6 @@ int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only)
         u32 tail;
         int ret;
 
-        qp->r_sge.sg_list = qp->r_sg_list;
-
         if (qp->ibqp.srq) {
                 srq = to_isrq(qp->ibqp.srq);
                 handler = srq->ibsrq.event_handler;
@@ -206,8 +204,10 @@ int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only)
                 wqe = get_rwqe_ptr(rq, tail);
                 if (++tail >= rq->size)
                         tail = 0;
-        } while (!wr_id_only && !ipath_init_sge(qp, wqe, &qp->r_len,
-                                                &qp->r_sge));
+                if (wr_id_only)
+                        break;
+                qp->r_sge.sg_list = qp->r_sg_list;
+        } while (!ipath_init_sge(qp, wqe, &qp->r_len, &qp->r_sge));
         qp->r_wr_id = wqe->wr_id;
         wq->tail = tail;
 
diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c
index 87f5c5a87b98..8e4d26d56a95 100644
--- a/drivers/infiniband/hw/mlx4/mr.c
+++ b/drivers/infiniband/hw/mlx4/mr.c
@@ -205,6 +205,7 @@ struct ib_mr *mlx4_ib_alloc_fast_reg_mr(struct ib_pd *pd,
                 goto err_mr;
 
         mr->ibmr.rkey = mr->ibmr.lkey = mr->mmr.key;
+        mr->umem = NULL;
 
         return &mr->ibmr;
 
diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c
index a2b04d62b1a4..aa1dc41f04c8 100644
--- a/drivers/infiniband/hw/nes/nes.c
+++ b/drivers/infiniband/hw/nes/nes.c
@@ -95,6 +95,10 @@ unsigned int wqm_quanta = 0x10000;
 module_param(wqm_quanta, int, 0644);
 MODULE_PARM_DESC(wqm_quanta, "WQM quanta");
 
+static unsigned int limit_maxrdreqsz;
+module_param(limit_maxrdreqsz, bool, 0644);
+MODULE_PARM_DESC(limit_maxrdreqsz, "Limit max read request size to 256 Bytes");
+
 LIST_HEAD(nes_adapter_list);
 static LIST_HEAD(nes_dev_list);
 
@@ -588,6 +592,18 @@ static int __devinit nes_probe(struct pci_dev *pcidev, const struct pci_device_i
                                                 nesdev->nesadapter->port_count;
         }
 
+        if ((limit_maxrdreqsz ||
+             ((nesdev->nesadapter->phy_type[0] == NES_PHY_TYPE_GLADIUS) &&
+              (hw_rev == NE020_REV1))) &&
+            (pcie_get_readrq(pcidev) > 256)) {
+                if (pcie_set_readrq(pcidev, 256))
+                        printk(KERN_ERR PFX "Unable to set max read request"
+                                " to 256 bytes\n");
+                else
+                        nes_debug(NES_DBG_INIT, "Max read request size set"
+                                " to 256 bytes\n");
+        }
+
         tasklet_init(&nesdev->dpc_tasklet, nes_dpc, (unsigned long)nesdev);
 
         /* bring up the Control QP */
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index 610b9d859597..bc0b4de04450 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -40,6 +40,7 @@
 #define NES_PHY_TYPE_ARGUS     4
 #define NES_PHY_TYPE_PUMA_1G   5
 #define NES_PHY_TYPE_PUMA_10G  6
+#define NES_PHY_TYPE_GLADIUS   7
 
 #define NES_MULTICAST_PF_MAX 8
 
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 932e56fcf774..d36c9a0bf1bb 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -220,14 +220,14 @@ static int nes_bind_mw(struct ib_qp *ibqp, struct ib_mw *ibmw,
         if (nesqp->ibqp_state > IB_QPS_RTS)
                 return -EINVAL;
 
-                spin_lock_irqsave(&nesqp->lock, flags);
+        spin_lock_irqsave(&nesqp->lock, flags);
 
         head = nesqp->hwqp.sq_head;
         qsize = nesqp->hwqp.sq_tail;
 
         /* Check for SQ overflow */
         if (((head + (2 * qsize) - nesqp->hwqp.sq_tail) % qsize) == (qsize - 1)) {
-                        spin_unlock_irqrestore(&nesqp->lock, flags);
+                spin_unlock_irqrestore(&nesqp->lock, flags);
                 return -EINVAL;
         }
 
@@ -269,7 +269,7 @@ static int nes_bind_mw(struct ib_qp *ibqp, struct ib_mw *ibmw,
         nes_write32(nesdev->regs+NES_WQE_ALLOC,
                         (1 << 24) | 0x00800000 | nesqp->hwqp.qp_id);
 
-                spin_unlock_irqrestore(&nesqp->lock, flags);
+        spin_unlock_irqrestore(&nesqp->lock, flags);
 
         return 0;
 }
@@ -349,7 +349,7 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd,
                         if (nesfmr->nesmr.pbls_used > nesadapter->free_4kpbl) {
                                 spin_unlock_irqrestore(&nesadapter->pbl_lock, flags);
                                 ret = -ENOMEM;
-                                goto failed_vpbl_alloc;
+                                goto failed_vpbl_avail;
                         } else {
                                 nesadapter->free_4kpbl -= nesfmr->nesmr.pbls_used;
                         }
@@ -357,7 +357,7 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd,
                         if (nesfmr->nesmr.pbls_used > nesadapter->free_256pbl) {
                                 spin_unlock_irqrestore(&nesadapter->pbl_lock, flags);
                                 ret = -ENOMEM;
-                                goto failed_vpbl_alloc;
+                                goto failed_vpbl_avail;
                         } else {
                                 nesadapter->free_256pbl -= nesfmr->nesmr.pbls_used;
                         }
@@ -391,14 +391,14 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd,
                         goto failed_vpbl_alloc;
                 }
 
-                nesfmr->root_vpbl.leaf_vpbl = kzalloc(sizeof(*nesfmr->root_vpbl.leaf_vpbl)*1024, GFP_KERNEL);
+                nesfmr->leaf_pbl_cnt = nesfmr->nesmr.pbls_used-1;
+                nesfmr->root_vpbl.leaf_vpbl = kzalloc(sizeof(*nesfmr->root_vpbl.leaf_vpbl)*1024, GFP_ATOMIC);
                 if (!nesfmr->root_vpbl.leaf_vpbl) {
                         spin_unlock_irqrestore(&nesadapter->pbl_lock, flags);
                         ret = -ENOMEM;
                         goto failed_leaf_vpbl_alloc;
                 }
 
-                nesfmr->leaf_pbl_cnt = nesfmr->nesmr.pbls_used-1;
                 nes_debug(NES_DBG_MR, "two level pbl, root_vpbl.pbl_vbase=%p"
                                 " leaf_pbl_cnt=%d root_vpbl.leaf_vpbl=%p\n",
                                 nesfmr->root_vpbl.pbl_vbase, nesfmr->leaf_pbl_cnt, nesfmr->root_vpbl.leaf_vpbl);
@@ -519,6 +519,16 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd,
                                 nesfmr->root_vpbl.pbl_pbase);
 
         failed_vpbl_alloc:
+        if (nesfmr->nesmr.pbls_used != 0) {
+                spin_lock_irqsave(&nesadapter->pbl_lock, flags);
+                if (nesfmr->nesmr.pbl_4k)
+                        nesadapter->free_4kpbl += nesfmr->nesmr.pbls_used;
+                else
+                        nesadapter->free_256pbl += nesfmr->nesmr.pbls_used;
+                spin_unlock_irqrestore(&nesadapter->pbl_lock, flags);
+        }
+
+failed_vpbl_avail:
         kfree(nesfmr);
 
         failed_fmr_alloc:
@@ -534,18 +544,14 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd,
  */
 static int nes_dealloc_fmr(struct ib_fmr *ibfmr)
 {
+        unsigned long flags;
         struct nes_mr *nesmr = to_nesmr_from_ibfmr(ibfmr);
         struct nes_fmr *nesfmr = to_nesfmr(nesmr);
         struct nes_vnic *nesvnic = to_nesvnic(ibfmr->device);
         struct nes_device *nesdev = nesvnic->nesdev;
-        struct nes_mr temp_nesmr = *nesmr;
+        struct nes_adapter *nesadapter = nesdev->nesadapter;
         int i = 0;
 
-        temp_nesmr.ibmw.device = ibfmr->device;
-        temp_nesmr.ibmw.pd = ibfmr->pd;
-        temp_nesmr.ibmw.rkey = ibfmr->rkey;
-        temp_nesmr.ibmw.uobject = NULL;
-
         /* free the resources */
         if (nesfmr->leaf_pbl_cnt == 0) {
                 /* single PBL case */
@@ -561,8 +567,24 @@ static int nes_dealloc_fmr(struct ib_fmr *ibfmr)
                 pci_free_consistent(nesdev->pcidev, 8192, nesfmr->root_vpbl.pbl_vbase,
                                 nesfmr->root_vpbl.pbl_pbase);
         }
+        nesmr->ibmw.device = ibfmr->device;
+        nesmr->ibmw.pd = ibfmr->pd;
+        nesmr->ibmw.rkey = ibfmr->rkey;
+        nesmr->ibmw.uobject = NULL;
 
-        return nes_dealloc_mw(&temp_nesmr.ibmw);
+        if (nesfmr->nesmr.pbls_used != 0) {
+                spin_lock_irqsave(&nesadapter->pbl_lock, flags);
+                if (nesfmr->nesmr.pbl_4k) {
+                        nesadapter->free_4kpbl += nesfmr->nesmr.pbls_used;
+                        WARN_ON(nesadapter->free_4kpbl > nesadapter->max_4kpbl);
+                } else {
+                        nesadapter->free_256pbl += nesfmr->nesmr.pbls_used;
+                        WARN_ON(nesadapter->free_256pbl > nesadapter->max_256pbl);
+                }
+                spin_unlock_irqrestore(&nesadapter->pbl_lock, flags);
+        }
+
+        return nes_dealloc_mw(&nesmr->ibmw);
 }
 
 
@@ -1595,7 +1617,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries,
                 nes_ucontext->mcrqf = req.mcrqf;
                 if (nes_ucontext->mcrqf) {
                         if (nes_ucontext->mcrqf & 0x80000000)
-                                nescq->hw_cq.cq_number = nesvnic->nic.qp_id + 12 + (nes_ucontext->mcrqf & 0xf) - 1;
+                                nescq->hw_cq.cq_number = nesvnic->nic.qp_id + 28 + 2 * ((nes_ucontext->mcrqf & 0xf) - 1);
                         else if (nes_ucontext->mcrqf & 0x40000000)
                                 nescq->hw_cq.cq_number = nes_ucontext->mcrqf & 0xffff;
                         else
@@ -3212,7 +3234,7 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr,
         if (nesqp->ibqp_state > IB_QPS_RTS)
                 return -EINVAL;
 
-                spin_lock_irqsave(&nesqp->lock, flags);
+        spin_lock_irqsave(&nesqp->lock, flags);
 
         head = nesqp->hwqp.sq_head;
 
@@ -3337,7 +3359,7 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr,
                                 (counter << 24) | 0x00800000 | nesqp->hwqp.qp_id);
         }
 
-                spin_unlock_irqrestore(&nesqp->lock, flags);
+        spin_unlock_irqrestore(&nesqp->lock, flags);
 
         if (err)
                 *bad_wr = ib_wr;
@@ -3368,7 +3390,7 @@ static int nes_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *ib_wr,
         if (nesqp->ibqp_state > IB_QPS_RTS)
                 return -EINVAL;
 
-                spin_lock_irqsave(&nesqp->lock, flags);
+        spin_lock_irqsave(&nesqp->lock, flags);
 
         head = nesqp->hwqp.rq_head;
 
@@ -3421,7 +3443,7 @@ static int nes_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *ib_wr,
                 nes_write32(nesdev->regs+NES_WQE_ALLOC, (counter<<24) | nesqp->hwqp.qp_id);
         }
 
-                spin_unlock_irqrestore(&nesqp->lock, flags);
+        spin_unlock_irqrestore(&nesqp->lock, flags);
 
         if (err)
                 *bad_wr = ib_wr;
@@ -3453,7 +3475,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry)
 
         nes_debug(NES_DBG_CQ, "\n");
 
-                spin_lock_irqsave(&nescq->lock, flags);
+        spin_lock_irqsave(&nescq->lock, flags);
 
         head = nescq->hw_cq.cq_head;
         cq_size = nescq->hw_cq.cq_size;
@@ -3562,7 +3584,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry)
         nes_debug(NES_DBG_CQ, "Reporting %u completions for CQ%u.\n",
                         cqe_count, nescq->hw_cq.cq_number);
 
-                spin_unlock_irqrestore(&nescq->lock, flags);
+        spin_unlock_irqrestore(&nescq->lock, flags);
 
         return cqe_count;
 }
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index fddded7900d1..85257f6b9576 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -106,12 +106,13 @@ int ipoib_open(struct net_device *dev)
 
         ipoib_dbg(priv, "bringing up interface\n");
 
-        napi_enable(&priv->napi);
         set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
 
         if (ipoib_pkey_dev_delay_open(dev))
                 return 0;
 
+        napi_enable(&priv->napi);
+
         if (ipoib_ib_dev_open(dev)) {
                 napi_disable(&priv->napi);
                 return -EINVAL;
@@ -546,6 +547,7 @@ static int path_rec_start(struct net_device *dev,
         if (path->query_id < 0) {
                 ipoib_warn(priv, "ib_sa_path_rec_get failed: %d\n", path->query_id);
                 path->query = NULL;
+                complete(&path->done);
                 return path->query_id;
         }
 
@@ -662,7 +664,7 @@ static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev,
                         skb_push(skb, sizeof *phdr);
                         __skb_queue_tail(&path->queue, skb);
 
-                        if (path_rec_start(dev, path)) {
+                        if (!path->query && path_rec_start(dev, path)) {
                                 spin_unlock_irqrestore(&priv->lock, flags);
                                 path_free(dev, path);
                                 return;
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index bb904a0a98bd..1bfc55d7a26c 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -1641,8 +1641,10 @@ isdn_net_ciscohdlck_slarp_send_reply(isdn_net_local *lp)
         /* slarp reply, send own ip/netmask; if values are nonsense remote
          * should think we are unable to provide it with an address via SLARP */
         p += put_u32(p, CISCO_SLARP_REPLY);
-        p += put_u32(p, addr);  // address
-        p += put_u32(p, mask);  // netmask
+        *(__be32 *)p = addr;    // address
+        p += 4;
+        *(__be32 *)p = mask;    // netmask
+        p += 4;
         p += put_u16(p, 0);     // unused
 
         isdn_net_write_super(lp, skb);
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 4840733cd903..3d7f4923cd13 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -441,13 +441,13 @@ static void process_queued_ios(struct work_struct *work)
                 __choose_pgpath(m);
 
         pgpath = m->current_pgpath;
-        m->pgpath_to_activate = m->current_pgpath;
 
         if ((pgpath && !m->queue_io) ||
             (!pgpath && !m->queue_if_no_path))
                 must_queue = 0;
 
-        if (m->pg_init_required && !m->pg_init_in_progress) {
+        if (m->pg_init_required && !m->pg_init_in_progress && pgpath) {
+                m->pgpath_to_activate = pgpath;
                 m->pg_init_count++;
                 m->pg_init_required = 0;
                 m->pg_init_in_progress = 1;
@@ -708,6 +708,10 @@ static int parse_hw_handler(struct arg_set *as, struct multipath *m)
                 m->hw_handler_name = NULL;
                 return -EINVAL;
         }
+
+        if (hw_argc > 1)
+                DMWARN("Ignoring user-specified arguments for "
+                       "hardware handler \"%s\"", m->hw_handler_name);
         consume(as, hw_argc - 1);
 
         return 0;
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index 9d7b53ed75b2..ec43f9fa4b2a 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -1032,6 +1032,7 @@ static void mirror_dtr(struct dm_target *ti)
 
         del_timer_sync(&ms->timer);
         flush_workqueue(ms->kmirrord_wq);
+        flush_scheduled_work();
         dm_kcopyd_client_destroy(ms->kcopyd_client);
         destroy_workqueue(ms->kmirrord_wq);
         free_context(ms, ti, ms->nr_mirrors);
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index a2d068dbe9e2..9e4ef88d421e 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -320,8 +320,10 @@ int __init dm_stripe_init(void)
         int r;
 
         r = dm_register_target(&stripe_target);
-        if (r < 0)
+        if (r < 0) {
                 DMWARN("target registration failed");
+                return r;
+        }
 
         kstriped = create_singlethread_workqueue("kstriped");
         if (!kstriped) {
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 6963ad148408..c99e4728ff41 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -375,7 +375,7 @@ static void start_io_acct(struct dm_io *io)
         dm_disk(md)->part0.in_flight = atomic_inc_return(&md->pending);
 }
 
-static int end_io_acct(struct dm_io *io)
+static void end_io_acct(struct dm_io *io)
 {
         struct mapped_device *md = io->md;
         struct bio *bio = io->bio;
@@ -391,7 +391,9 @@ static int end_io_acct(struct dm_io *io)
         dm_disk(md)->part0.in_flight = pending =
                 atomic_dec_return(&md->pending);
 
-        return !pending;
+        /* nudge anyone waiting on suspend queue */
+        if (!pending)
+                wake_up(&md->wait);
 }
 
 /*
@@ -499,9 +501,7 @@ static void dec_pending(struct dm_io *io, int error)
                         spin_unlock_irqrestore(&io->md->pushback_lock, flags);
                 }
 
-                if (end_io_acct(io))
-                        /* nudge anyone waiting on suspend queue */
-                        wake_up(&io->md->wait);
+                end_io_acct(io);
 
                 if (io->error != DM_ENDIO_REQUEUE) {
                         blk_add_trace_bio(io->md->queue, io->bio,
@@ -937,16 +937,24 @@ static void dm_unplug_all(struct request_queue *q)
 
 static int dm_any_congested(void *congested_data, int bdi_bits)
 {
-        int r;
-        struct mapped_device *md = (struct mapped_device *) congested_data;
-        struct dm_table *map = dm_get_table(md);
+        int r = bdi_bits;
+        struct mapped_device *md = congested_data;
+        struct dm_table *map;
 
-        if (!map || test_bit(DMF_BLOCK_IO, &md->flags))
-                r = bdi_bits;
-        else
-                r = dm_table_any_congested(map, bdi_bits);
+        atomic_inc(&md->pending);
+
+        if (!test_bit(DMF_BLOCK_IO, &md->flags)) {
+                map = dm_get_table(md);
+                if (map) {
+                        r = dm_table_any_congested(map, bdi_bits);
+                        dm_table_put(map);
+                }
+        }
+
+        if (!atomic_dec_return(&md->pending))
+                /* nudge anyone waiting on suspend queue */
+                wake_up(&md->wait);
 
-        dm_table_put(map);
         return r;
 }
 
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 5689d1f1d444..8557bf12cfb4 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -223,6 +223,8 @@ static void dvb_frontend_init(struct dvb_frontend *fe)
         if (fe->ops.init)
                 fe->ops.init(fe);
         if (fe->ops.tuner_ops.init) {
+                if (fe->ops.i2c_gate_ctrl)
+                        fe->ops.i2c_gate_ctrl(fe, 1);
                 fe->ops.tuner_ops.init(fe);
                 if (fe->ops.i2c_gate_ctrl)
                         fe->ops.i2c_gate_ctrl(fe, 0);
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 3c13bcfa6385..62b68c291d99 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -261,7 +261,7 @@ config DVB_USB_DW2102
           Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers
           and the TeVii S650.
 
-config  DVB_USB_CINERGY_T2
+config DVB_USB_CINERGY_T2
         tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver"
         depends on DVB_USB
         help
@@ -283,6 +283,7 @@ config DVB_USB_ANYSEE
 config DVB_USB_DTV5100
         tristate "AME DTV-5100 USB2.0 DVB-T support"
         depends on DVB_USB
+        select DVB_ZL10353 if !DVB_FE_CUSTOMISE
         select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
         help
           Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index cb0829c038ce..847d8fdd9ec4 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -31,13 +31,13 @@
 #include "mc44s80x.h"
 #endif
 
-int dvb_usb_af9015_debug;
+static int dvb_usb_af9015_debug;
 module_param_named(debug, dvb_usb_af9015_debug, int, 0644);
 MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
-int dvb_usb_af9015_remote;
+static int dvb_usb_af9015_remote;
 module_param_named(remote, dvb_usb_af9015_remote, int, 0644);
 MODULE_PARM_DESC(remote, "select remote");
-int dvb_usb_af9015_dual_mode;
+static int dvb_usb_af9015_dual_mode;
 module_param_named(dual_mode, dvb_usb_af9015_dual_mode, int, 0644);
 MODULE_PARM_DESC(dual_mode, "enable dual mode");
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
@@ -46,7 +46,7 @@ static DEFINE_MUTEX(af9015_usb_mutex);
 
 static struct af9015_config af9015_config;
 static struct dvb_usb_device_properties af9015_properties[2];
-int af9015_properties_count = ARRAY_SIZE(af9015_properties);
+static int af9015_properties_count = ARRAY_SIZE(af9015_properties);
 
 static struct af9013_config af9015_af9013_config[] = {
         {
@@ -549,7 +549,7 @@ static int af9015_eeprom_dump(struct dvb_usb_device *d)
         return 0;
 }
 
-int af9015_download_ir_table(struct dvb_usb_device *d)
+static int af9015_download_ir_table(struct dvb_usb_device *d)
 {
         int i, packets = 0, ret;
         u16 addr = 0x9a56; /* ir-table start address */
@@ -999,7 +999,7 @@ static int af9015_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 }
 
 /* init 2nd I2C adapter */
-int af9015_i2c_init(struct dvb_usb_device *d)
+static int af9015_i2c_init(struct dvb_usb_device *d)
 {
         int ret;
         struct af9015_state *state = d->priv;
@@ -1419,7 +1419,7 @@ static int af9015_usb_probe(struct usb_interface *intf,
         return ret;
 }
 
-void af9015_i2c_exit(struct dvb_usb_device *d)
+static void af9015_i2c_exit(struct dvb_usb_device *d)
 {
         struct af9015_state *state = d->priv;
         deb_info("%s: \n", __func__);
diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h
index 882e8a4b3681..6c3c97293316 100644
--- a/drivers/media/dvb/dvb-usb/af9015.h
+++ b/drivers/media/dvb/dvb-usb/af9015.h
@@ -27,7 +27,6 @@
 #define DVB_USB_LOG_PREFIX "af9015"
 #include "dvb-usb.h"
 
-extern int dvb_usb_af9015_debug;
 #define deb_info(args...) dprintk(dvb_usb_af9015_debug, 0x01, args)
 #define deb_rc(args...)   dprintk(dvb_usb_af9015_debug, 0x02, args)
 #define deb_xfer(args...) dprintk(dvb_usb_af9015_debug, 0x04, args)
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index c786359fba03..cd2edbcaa097 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -46,7 +46,7 @@ module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644);
 MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)");
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
-static struct mutex anysee_usb_mutex;
+static DEFINE_MUTEX(anysee_usb_mutex);
 
 static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen,
         u8 *rbuf, u8 rlen)
@@ -456,8 +456,6 @@ static int anysee_probe(struct usb_interface *intf,
         struct usb_host_interface *alt;
         int ret;
 
-        mutex_init(&anysee_usb_mutex);
-
         /* There is one interface with two alternate settings.
            Alternate setting 0 is for bulk transfer.
            Alternate setting 1 is for isochronous transfer.
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
index 5cef12a07f72..6fe71c6745eb 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
@@ -13,14 +13,14 @@ int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf,
 {
         int actlen,ret = -ENOMEM;
 
+        if (!d || wbuf == NULL || wlen == 0)
+                return -EINVAL;
+
         if (d->props.generic_bulk_ctrl_endpoint == 0) {
                 err("endpoint for generic control not specified.");
                 return -EINVAL;
         }
 
-        if (wbuf == NULL || wlen == 0)
-                return -EINVAL;
-
         if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
                 return ret;
 
diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c
index 21c1060cf10e..692b68a9e73b 100644
--- a/drivers/media/dvb/frontends/af9013.c
+++ b/drivers/media/dvb/frontends/af9013.c
@@ -1187,7 +1187,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status)
         if (tmp)
                 *status |= FE_HAS_SYNC | FE_HAS_LOCK;
 
-        if (!*status & FE_HAS_SIGNAL) {
+        if (!(*status & FE_HAS_SIGNAL)) {
                 /* AGC lock */
                 ret = af9013_read_reg_bits(state, 0xd1a0, 6, 1, &tmp);
                 if (ret)
@@ -1196,7 +1196,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status)
                         *status |= FE_HAS_SIGNAL;
         }
 
-        if (!*status & FE_HAS_CARRIER) {
+        if (!(*status & FE_HAS_CARRIER)) {
                 /* CFO lock */
                 ret = af9013_read_reg_bits(state, 0xd333, 7, 1, &tmp);
                 if (ret)
@@ -1205,7 +1205,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status)
                         *status |= FE_HAS_CARRIER;
         }
 
-        if (!*status & FE_HAS_CARRIER) {
+        if (!(*status & FE_HAS_CARRIER)) {
                 /* SFOE lock */
                 ret = af9013_read_reg_bits(state, 0xd334, 6, 1, &tmp);
                 if (ret)
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 04cd7c04bdde..5189c4eb439f 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -355,6 +355,20 @@ config USB_SI470X
         tristate "Silicon Labs Si470x FM Radio Receiver support"
         depends on USB && VIDEO_V4L2
         ---help---
+          This is a driver for USB devices with the Silicon Labs SI470x
+          chip. Currently these devices are known to work:
+          - 10c4:818a: Silicon Labs USB FM Radio Reference Design
+          - 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music)
+          - 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700)
+
+          Sound is provided by the ALSA USB Audio/MIDI driver. Therefore
+          if you don't want to use the device solely for RDS receiving,
+          it is recommended to also select SND_USB_AUDIO.
+
+          Please have a look at the documentation, especially on how
+          to redirect the audio stream from the radio to your sound device:
+          Documentation/video4linux/si470x.txt
+
           Say Y here if you want to connect this type of radio to your
           computer's USB port.
 
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index 5920cd306975..3e1830293de5 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -4,6 +4,7 @@
  *  Driver for USB radios for the Silicon Labs Si470x FM Radio Receivers:
  *   - Silicon Labs USB FM Radio Reference Design
  *   - ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF)
+ *   - KWorld USB FM Radio SnapMusic Mobile 700 (FM700)
  *
  *  Copyright (c) 2008 Tobias Lorenz <tobias.lorenz@gmx.net>
  *
@@ -24,19 +25,6 @@
 
 
 /*
- * User Notes:
- * - USB Audio is provided by the alsa snd_usb_audio module.
- *   For listing you have to redirect the sound, for example using:
- *   arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B -
- * - regarding module parameters in /sys/module/radio_si470x/parameters:
- *   the contents of read-only files (0444) are not updated, even if
- *   space, band and de are changed using private video controls
- * - increase tune_timeout, if you often get -EIO errors
- * - hw_freq_seek returns -EAGAIN, when timed out or band limit is reached
- */
-
-
-/*
  * History:
  * 2008-01-12   Tobias Lorenz <tobias.lorenz@gmx.net>
  *              Version 1.0.0
@@ -105,6 +93,9 @@
  *              - afc indication
  *              - more safety checks, let si470x_get_freq return errno
  *              - vidioc behavior corrected according to v4l2 spec
+ * 2008-10-20   Alexey Klimov <klimov.linux@gmail.com>
+ *              - add support for KWorld USB FM Radio FM700
+ *              - blacklisted KWorld radio in hid-core.c and hid-ids.h
  *
  * ToDo:
  * - add firmware download/update support
@@ -145,6 +136,8 @@ static struct usb_device_id si470x_usb_driver_id_table[] = {
         { USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) },
         /* ADS/Tech FM Radio Receiver (formerly Instant FM Music) */
         { USB_DEVICE_AND_INTERFACE_INFO(0x06e1, 0xa155, USB_CLASS_HID, 0, 0) },
+        /* KWorld USB FM Radio SnapMusic Mobile 700 (FM700) */
+        { USB_DEVICE_AND_INTERFACE_INFO(0x1b80, 0xd700, USB_CLASS_HID, 0, 0) },
         /* Terminating entry */
         { }
 };
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index a8c068e1de1c..1740b9ebdcef 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -1476,12 +1476,9 @@ static int cafe_v4l_open(struct inode *inode, struct file *filp)
 {
         struct cafe_camera *cam;
 
-        lock_kernel();
         cam = cafe_find_dev(iminor(inode));
-        if (cam == NULL) {
-                unlock_kernel();
+        if (cam == NULL)
                 return -ENODEV;
-        }
         filp->private_data = cam;
 
         mutex_lock(&cam->s_mutex);
@@ -1493,7 +1490,6 @@ static int cafe_v4l_open(struct inode *inode, struct file *filp)
         }
         (cam->users)++;
         mutex_unlock(&cam->s_mutex);
-        unlock_kernel();
         return 0;
 }
 
diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c
index bd5d9de5a008..e6ca4012b5f0 100644
--- a/drivers/media/video/compat_ioctl32.c
+++ b/drivers/media/video/compat_ioctl32.c
@@ -867,6 +867,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
         case VIDIOC_STREAMON32:
         case VIDIOC_STREAMOFF32:
         case VIDIOC_G_PARM:
+        case VIDIOC_S_PARM:
         case VIDIOC_G_STD:
         case VIDIOC_S_STD:
         case VIDIOC_G_TUNER:
@@ -885,6 +886,8 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
         case VIDIOC_S_INPUT32:
         case VIDIOC_TRY_FMT32:
         case VIDIOC_S_HW_FREQ_SEEK:
+        case VIDIOC_ENUM_FRAMESIZES:
+        case VIDIOC_ENUM_FRAMEINTERVALS:
                 ret = do_video_ioctl(file, cmd, arg);
                 break;
 
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 7a1a7830a6b3..7874d9790a51 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -448,7 +448,14 @@ static int __devinit cx18_init_struct1(struct cx18 *cx)
         mutex_init(&cx->gpio_lock);
 
         spin_lock_init(&cx->lock);
-        spin_lock_init(&cx->dma_reg_lock);
+
+        cx->work_queue = create_singlethread_workqueue(cx->name);
+        if (cx->work_queue == NULL) {
+                CX18_ERR("Could not create work queue\n");
+                return -1;
+        }
+
+        INIT_WORK(&cx->work, cx18_work_handler);
 
         /* start counting open_id at 1 */
         cx->open_id = 1;
@@ -581,10 +588,10 @@ static void cx18_load_and_init_modules(struct cx18 *cx)
 
 #ifdef MODULE
         /* load modules */
-#ifndef CONFIG_MEDIA_TUNER
+#ifdef CONFIG_MEDIA_TUNER_MODULE
         hw = cx18_request_module(cx, hw, "tuner", CX18_HW_TUNER);
 #endif
-#ifndef CONFIG_VIDEO_CS5345
+#ifdef CONFIG_VIDEO_CS5345_MODULE
         hw = cx18_request_module(cx, hw, "cs5345", CX18_HW_CS5345);
 #endif
 #endif
@@ -832,6 +839,7 @@ free_map:
 free_mem:
         release_mem_region(cx->base_addr, CX18_MEM_SIZE);
 free_workqueue:
+        destroy_workqueue(cx->work_queue);
 err:
         if (retval == 0)
                 retval = -ENODEV;
@@ -932,6 +940,9 @@ static void cx18_remove(struct pci_dev *pci_dev)
 
         cx18_halt_firmware(cx);
 
+        flush_workqueue(cx->work_queue);
+        destroy_workqueue(cx->work_queue);
+
         cx18_streams_cleanup(cx, 1);
 
         exit_cx18_i2c(cx);
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index a4b1708fafe7..bbdd5f25041d 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -199,12 +199,15 @@ struct cx18_options {
 #define CX18_F_S_APPL_IO        8       /* this stream is used read/written by an application */
 
 /* per-cx18, i_flags */
-#define CX18_F_I_LOADED_FW      0       /* Loaded the firmware the first time */
-#define CX18_F_I_EOS            4       /* End of encoder stream reached */
-#define CX18_F_I_RADIO_USER     5       /* The radio tuner is selected */
-#define CX18_F_I_ENC_PAUSED     13      /* the encoder is paused */
-#define CX18_F_I_INITED         21      /* set after first open */
-#define CX18_F_I_FAILED         22      /* set if first open failed */
+#define CX18_F_I_LOADED_FW              0       /* Loaded firmware 1st time */
+#define CX18_F_I_EOS                    4       /* End of encoder stream */
+#define CX18_F_I_RADIO_USER             5       /* radio tuner is selected */
+#define CX18_F_I_ENC_PAUSED             13      /* the encoder is paused */
+#define CX18_F_I_HAVE_WORK              15      /* there is work to be done */
+#define CX18_F_I_WORK_HANDLER_DVB       18      /* work to be done for DVB */
+#define CX18_F_I_INITED                 21      /* set after first open */
+#define CX18_F_I_FAILED                 22      /* set if first open failed */
+#define CX18_F_I_WORK_INITED            23      /* worker thread initialized */
 
 /* These are the VBI types as they appear in the embedded VBI private packets. */
 #define CX18_SLICED_TYPE_TELETEXT_B     (1)
@@ -402,8 +405,6 @@ struct cx18 {
         spinlock_t lock;        /* lock access to this struct */
         int search_pack_header;
 
-        spinlock_t dma_reg_lock; /* lock access to DMA engine registers */
-
         int open_id;            /* incremented each time an open occurs, used as
                                    unique ID. Starts at 1, so 0 can be used as
                                    uninitialized value in the stream->id. */
@@ -433,6 +434,9 @@ struct cx18 {
         /* when the current DMA is finished this queue is woken up */
         wait_queue_head_t dma_waitq;
 
+        struct workqueue_struct *work_queue;
+        struct work_struct work;
+
         /* i2c */
         struct i2c_adapter i2c_adap[2];
         struct i2c_algo_bit_data i2c_algo[2];
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index afc694e7bdb2..4542e2e5e3d7 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -23,6 +23,8 @@
 #include "cx18-dvb.h"
 #include "cx18-io.h"
 #include "cx18-streams.h"
+#include "cx18-queue.h"
+#include "cx18-scb.h"
 #include "cx18-cards.h"
 #include "s5h1409.h"
 #include "mxl5005s.h"
@@ -300,3 +302,24 @@ static int dvb_register(struct cx18_stream *stream)
 
         return ret;
 }
+
+void cx18_dvb_work_handler(struct cx18 *cx)
+{
+        struct cx18_buffer *buf;
+        struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_TS];
+
+        while ((buf = cx18_dequeue(s, &s->q_full)) != NULL) {
+                if (s->dvb.enabled)
+                        dvb_dmx_swfilter(&s->dvb.demux, buf->buf,
+                                         buf->bytesused);
+
+                cx18_enqueue(s, buf, &s->q_free);
+                cx18_buf_sync_for_device(s, buf);
+                if (s->handle == CX18_INVALID_TASK_HANDLE) /* FIXME: improve */
+                        continue;
+
+                cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
+                       (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+                       1, buf->id, s->buf_size);
+        }
+}
diff --git a/drivers/media/video/cx18/cx18-dvb.h b/drivers/media/video/cx18/cx18-dvb.h
index bf8d8f6f5455..bbdcefc87f28 100644
--- a/drivers/media/video/cx18/cx18-dvb.h
+++ b/drivers/media/video/cx18/cx18-dvb.h
@@ -23,3 +23,4 @@
 
 int cx18_dvb_register(struct cx18_stream *stream);
 void cx18_dvb_unregister(struct cx18_stream *stream);
+void cx18_dvb_work_handler(struct cx18 *cx);
diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c
index 700ab9439c16..220fae8d4ad7 100644
--- a/drivers/media/video/cx18/cx18-io.c
+++ b/drivers/media/video/cx18/cx18-io.c
@@ -88,6 +88,19 @@ void cx18_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr)
         cx18_log_write_retries(cx, i, addr);
 }
 
+void _cx18_writel_expect(struct cx18 *cx, u32 val, void __iomem *addr,
+                         u32 eval, u32 mask)
+{
+        int i;
+        eval &= mask;
+        for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) {
+                cx18_writel_noretry(cx, val, addr);
+                if (eval == (cx18_readl_noretry(cx, addr) & mask))
+                        break;
+        }
+        cx18_log_write_retries(cx, i, addr);
+}
+
 void cx18_writew_retry(struct cx18 *cx, u16 val, void __iomem *addr)
 {
         int i;
@@ -218,7 +231,7 @@ void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count)
 void cx18_sw1_irq_enable(struct cx18 *cx, u32 val)
 {
         u32 r;
-        cx18_write_reg(cx, val, SW1_INT_STATUS);
+        cx18_write_reg_expect(cx, val, SW1_INT_STATUS, ~val, val);
         r = cx18_read_reg(cx, SW1_INT_ENABLE_PCI);
         cx18_write_reg(cx, r | val, SW1_INT_ENABLE_PCI);
 }
@@ -233,7 +246,7 @@ void cx18_sw1_irq_disable(struct cx18 *cx, u32 val)
 void cx18_sw2_irq_enable(struct cx18 *cx, u32 val)
 {
         u32 r;
-        cx18_write_reg(cx, val, SW2_INT_STATUS);
+        cx18_write_reg_expect(cx, val, SW2_INT_STATUS, ~val, val);
         r = cx18_read_reg(cx, SW2_INT_ENABLE_PCI);
         cx18_write_reg(cx, r | val, SW2_INT_ENABLE_PCI);
 }
diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h
index 287a5e8bf67b..425244453ea7 100644
--- a/drivers/media/video/cx18/cx18-io.h
+++ b/drivers/media/video/cx18/cx18-io.h
@@ -133,6 +133,8 @@ static inline void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr)
                 cx18_writel_noretry(cx, val, addr);
 }
 
+void _cx18_writel_expect(struct cx18 *cx, u32 val, void __iomem *addr,
+                         u32 eval, u32 mask);
 
 static inline
 void cx18_writew_noretry(struct cx18 *cx, u16 val, void __iomem *addr)
@@ -271,6 +273,21 @@ static inline void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg)
                 cx18_write_reg_noretry(cx, val, reg);
 }
 
+static inline void _cx18_write_reg_expect(struct cx18 *cx, u32 val, u32 reg,
+                                          u32 eval, u32 mask)
+{
+        _cx18_writel_expect(cx, val, cx->reg_mem + reg, eval, mask);
+}
+
+static inline void cx18_write_reg_expect(struct cx18 *cx, u32 val, u32 reg,
+                                         u32 eval, u32 mask)
+{
+        if (cx18_retry_mmio)
+                _cx18_write_reg_expect(cx, val, reg, eval, mask);
+        else
+                cx18_write_reg_noretry(cx, val, reg);
+}
+
 
 static inline u32 cx18_read_reg_noretry(struct cx18 *cx, u32 reg)
 {
diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c
index 360330f5463f..5fbfbd0f1493 100644
--- a/drivers/media/video/cx18/cx18-irq.c
+++ b/drivers/media/video/cx18/cx18-irq.c
@@ -29,8 +29,20 @@
 #include "cx18-mailbox.h"
 #include "cx18-vbi.h"
 #include "cx18-scb.h"
+#include "cx18-dvb.h"
 
-#define DMA_MAGIC_COOKIE 0x000001fe
+void cx18_work_handler(struct work_struct *work)
+{
+        struct cx18 *cx = container_of(work, struct cx18, work);
+        if (test_and_clear_bit(CX18_F_I_WORK_INITED, &cx->i_flags)) {
+                struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
+                /* This thread must use the FIFO scheduler as it
+                 * is realtime sensitive. */
+                sched_setscheduler(current, SCHED_FIFO, &param);
+        }
+        if (test_and_clear_bit(CX18_F_I_WORK_HANDLER_DVB, &cx->i_flags))
+                cx18_dvb_work_handler(cx);
+}
 
 static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb)
 {
@@ -67,17 +79,11 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb)
         if (buf) {
                 cx18_buf_sync_for_cpu(s, buf);
                 if (s->type == CX18_ENC_STREAM_TYPE_TS && s->dvb.enabled) {
-                        /* process the buffer here */
-                        CX18_DEBUG_HI_DMA("TS recv and sent bytesused=%d\n",
-                                        buf->bytesused);
-
-                        dvb_dmx_swfilter(&s->dvb.demux, buf->buf,
+                        CX18_DEBUG_HI_DMA("TS recv bytesused = %d\n",
                                         buf->bytesused);
 
-                        cx18_buf_sync_for_device(s, buf);
-                        cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
-                            (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
-                            1, buf->id, s->buf_size);
+                        set_bit(CX18_F_I_WORK_HANDLER_DVB, &cx->i_flags);
+                        set_bit(CX18_F_I_HAVE_WORK, &cx->i_flags);
                 } else
                         set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags);
         } else {
@@ -109,7 +115,7 @@ static void epu_debug(struct cx18 *cx, struct cx18_mailbox *mb)
                 CX18_INFO("FW version: %s\n", p - 1);
 }
 
-static void hpu_cmd(struct cx18 *cx, u32 sw1)
+static void epu_cmd(struct cx18 *cx, u32 sw1)
 {
         struct cx18_mailbox mb;
 
@@ -125,12 +131,31 @@ static void hpu_cmd(struct cx18 *cx, u32 sw1)
                         epu_debug(cx, &mb);
                         break;
                 default:
-                        CX18_WARN("Unexpected mailbox command %08x\n", mb.cmd);
+                        CX18_WARN("Unknown CPU_TO_EPU mailbox command %#08x\n",
+                                  mb.cmd);
                         break;
                 }
         }
-        if (sw1 & (IRQ_APU_TO_EPU | IRQ_HPU_TO_EPU))
-                CX18_WARN("Unexpected interrupt %08x\n", sw1);
+
+        if (sw1 & IRQ_APU_TO_EPU) {
+                cx18_memcpy_fromio(cx, &mb, &cx->scb->apu2epu_mb, sizeof(mb));
+                CX18_WARN("Unknown APU_TO_EPU mailbox command %#08x\n", mb.cmd);
+        }
+
+        if (sw1 & IRQ_HPU_TO_EPU) {
+                cx18_memcpy_fromio(cx, &mb, &cx->scb->hpu2epu_mb, sizeof(mb));
+                CX18_WARN("Unknown HPU_TO_EPU mailbox command %#08x\n", mb.cmd);
+        }
+}
+
+static void xpu_ack(struct cx18 *cx, u32 sw2)
+{
+        if (sw2 & IRQ_CPU_TO_EPU_ACK)
+                wake_up(&cx->mb_cpu_waitq);
+        if (sw2 & IRQ_APU_TO_EPU_ACK)
+                wake_up(&cx->mb_apu_waitq);
+        if (sw2 & IRQ_HPU_TO_EPU_ACK)
+                wake_up(&cx->mb_hpu_waitq);
 }
 
 irqreturn_t cx18_irq_handler(int irq, void *dev_id)
@@ -140,43 +165,36 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id)
         u32 sw2, sw2_mask;
         u32 hw2, hw2_mask;
 
-        spin_lock(&cx->dma_reg_lock);
-
+        sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI);
+        sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask;
+        sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI);
+        sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask;
         hw2_mask = cx18_read_reg(cx, HW2_INT_MASK5_PCI);
         hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & hw2_mask;
-        sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK;
-        sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask;
-        sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU;
-        sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask;
 
-        cx18_write_reg(cx, sw2&sw2_mask, SW2_INT_STATUS);
-        cx18_write_reg(cx, sw1&sw1_mask, SW1_INT_STATUS);
-        cx18_write_reg(cx, hw2&hw2_mask, HW2_INT_CLR_STATUS);
+        if (sw1)
+                cx18_write_reg_expect(cx, sw1, SW1_INT_STATUS, ~sw1, sw1);
+        if (sw2)
+                cx18_write_reg_expect(cx, sw2, SW2_INT_STATUS, ~sw2, sw2);
+        if (hw2)
+                cx18_write_reg_expect(cx, hw2, HW2_INT_CLR_STATUS, ~hw2, hw2);
 
         if (sw1 || sw2 || hw2)
                 CX18_DEBUG_HI_IRQ("SW1: %x  SW2: %x  HW2: %x\n", sw1, sw2, hw2);
 
         /* To do: interrupt-based I2C handling
-        if (hw2 & 0x00c00000) {
+        if (hw2 & (HW2_I2C1_INT|HW2_I2C2_INT)) {
         }
         */
 
-        if (sw2) {
-                if (sw2 & (cx18_readl(cx, &cx->scb->cpu2hpu_irq_ack) |
-                           cx18_readl(cx, &cx->scb->cpu2epu_irq_ack)))
-                        wake_up(&cx->mb_cpu_waitq);
-                if (sw2 & (cx18_readl(cx, &cx->scb->apu2hpu_irq_ack) |
-                           cx18_readl(cx, &cx->scb->apu2epu_irq_ack)))
-                        wake_up(&cx->mb_apu_waitq);
-                if (sw2 & cx18_readl(cx, &cx->scb->epu2hpu_irq_ack))
-                        wake_up(&cx->mb_epu_waitq);
-                if (sw2 & cx18_readl(cx, &cx->scb->hpu2epu_irq_ack))
-                        wake_up(&cx->mb_hpu_waitq);
-        }
+        if (sw2)
+                xpu_ack(cx, sw2);
 
         if (sw1)
-                hpu_cmd(cx, sw1);
-        spin_unlock(&cx->dma_reg_lock);
+                epu_cmd(cx, sw1);
+
+        if (test_and_clear_bit(CX18_F_I_HAVE_WORK, &cx->i_flags))
+                queue_work(cx->work_queue, &cx->work);
 
-        return (hw2 | sw1 | sw2) ? IRQ_HANDLED : IRQ_NONE;
+        return (sw1 || sw2 || hw2) ? IRQ_HANDLED : IRQ_NONE;
 }
diff --git a/drivers/media/video/cx18/cx18-irq.h b/drivers/media/video/cx18/cx18-irq.h
index 379f704f5cba..6173ca3bc9e4 100644
--- a/drivers/media/video/cx18/cx18-irq.h
+++ b/drivers/media/video/cx18/cx18-irq.h
@@ -32,6 +32,4 @@
 
 irqreturn_t cx18_irq_handler(int irq, void *dev_id);
 
-void cx18_irq_work_handler(struct work_struct *work);
-void cx18_dma_stream_dec_prepare(struct cx18_stream *s, u32 offset, int lock);
-void cx18_unfinished_dma(unsigned long arg);
+void cx18_work_handler(struct work_struct *work);
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index 9d18dd22de76..acff7dfb60df 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -83,7 +83,7 @@ static const struct cx18_api_info api_info[] = {
         API_ENTRY(CPU, CX18_CPU_DE_SET_MDL_ACK,                 0),
         API_ENTRY(CPU, CX18_CPU_DE_SET_MDL,                     API_FAST),
         API_ENTRY(CPU, CX18_APU_RESETAI,                        API_FAST),
-        API_ENTRY(CPU, CX18_CPU_DE_RELEASE_MDL,                 0),
+        API_ENTRY(CPU, CX18_CPU_DE_RELEASE_MDL,                 API_SLOW),
         API_ENTRY(0, 0,                                         0),
 };
 
@@ -176,7 +176,7 @@ long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb)
 
         cx18_setup_page(cx, SCB_OFFSET);
         cx18_write_sync(cx, mb->request, &ack_mb->ack);
-        cx18_write_reg(cx, ack_irq, SW2_INT_SET);
+        cx18_write_reg_expect(cx, ack_irq, SW2_INT_SET, ack_irq, ack_irq);
         return 0;
 }
 
@@ -225,7 +225,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
         }
         if (info->flags & API_FAST)
                 timeout /= 2;
-        cx18_write_reg(cx, irq, SW1_INT_SET);
+        cx18_write_reg_expect(cx, irq, SW1_INT_SET, irq, irq);
 
         while (!sig && cx18_readl(cx, &mb->ack) != cx18_readl(cx, &mb->request)
                && cnt < 660) {
diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c
index a33ba04a2686..174682c2582f 100644
--- a/drivers/media/video/cx18/cx18-queue.c
+++ b/drivers/media/video/cx18/cx18-queue.c
@@ -88,15 +88,13 @@ struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id,
 
                 if (buf->id != id)
                         continue;
+
                 buf->bytesused = bytesused;
-                /* the transport buffers are handled differently,
-                   they are not moved to the full queue */
-                if (s->type != CX18_ENC_STREAM_TYPE_TS) {
-                        atomic_dec(&s->q_free.buffers);
-                        atomic_inc(&s->q_full.buffers);
-                        s->q_full.bytesused += buf->bytesused;
-                        list_move_tail(&buf->list, &s->q_full.list);
-                }
+                atomic_dec(&s->q_free.buffers);
+                atomic_inc(&s->q_full.buffers);
+                s->q_full.bytesused += buf->bytesused;
+                list_move_tail(&buf->list, &s->q_full.list);
+
                 spin_unlock(&s->qlock);
                 return buf;
         }
diff --git a/drivers/media/video/cx18/cx18-scb.h b/drivers/media/video/cx18/cx18-scb.h
index 86b4cb15d163..594713bbed68 100644
--- a/drivers/media/video/cx18/cx18-scb.h
+++ b/drivers/media/video/cx18/cx18-scb.h
@@ -128,22 +128,22 @@ struct cx18_scb {
         u32 apu2cpu_irq;
         /* Value to write to register SW2 register set (0xC7003140) after the
            command is cleared */
-        u32 apu2cpu_irq_ack;
+        u32 cpu2apu_irq_ack;
         u32 reserved2[13];
 
         u32 hpu2cpu_mb_offset;
         u32 hpu2cpu_irq;
-        u32 hpu2cpu_irq_ack;
+        u32 cpu2hpu_irq_ack;
         u32 reserved3[13];
 
         u32 ppu2cpu_mb_offset;
         u32 ppu2cpu_irq;
-        u32 ppu2cpu_irq_ack;
+        u32 cpu2ppu_irq_ack;
         u32 reserved4[13];
 
         u32 epu2cpu_mb_offset;
         u32 epu2cpu_irq;
-        u32 epu2cpu_irq_ack;
+        u32 cpu2epu_irq_ack;
         u32 reserved5[13];
         u32 reserved6[8];
 
@@ -153,22 +153,22 @@ struct cx18_scb {
         u32 reserved11[7];
         u32 cpu2apu_mb_offset;
         u32 cpu2apu_irq;
-        u32 cpu2apu_irq_ack;
+        u32 apu2cpu_irq_ack;
         u32 reserved12[13];
 
         u32 hpu2apu_mb_offset;
         u32 hpu2apu_irq;
-        u32 hpu2apu_irq_ack;
+        u32 apu2hpu_irq_ack;
         u32 reserved13[13];
 
         u32 ppu2apu_mb_offset;
         u32 ppu2apu_irq;
-        u32 ppu2apu_irq_ack;
+        u32 apu2ppu_irq_ack;
         u32 reserved14[13];
 
         u32 epu2apu_mb_offset;
         u32 epu2apu_irq;
-        u32 epu2apu_irq_ack;
+        u32 apu2epu_irq_ack;
         u32 reserved15[13];
         u32 reserved16[8];
 
@@ -178,22 +178,22 @@ struct cx18_scb {
         u32 reserved21[7];
         u32 cpu2hpu_mb_offset;
         u32 cpu2hpu_irq;
-        u32 cpu2hpu_irq_ack;
+        u32 hpu2cpu_irq_ack;
         u32 reserved22[13];
 
         u32 apu2hpu_mb_offset;
         u32 apu2hpu_irq;
-        u32 apu2hpu_irq_ack;
+        u32 hpu2apu_irq_ack;
         u32 reserved23[13];
 
         u32 ppu2hpu_mb_offset;
         u32 ppu2hpu_irq;
-        u32 ppu2hpu_irq_ack;
+        u32 hpu2ppu_irq_ack;
         u32 reserved24[13];
 
         u32 epu2hpu_mb_offset;
         u32 epu2hpu_irq;
-        u32 epu2hpu_irq_ack;
+        u32 hpu2epu_irq_ack;
         u32 reserved25[13];
         u32 reserved26[8];
 
@@ -203,22 +203,22 @@ struct cx18_scb {
         u32 reserved31[7];
         u32 cpu2ppu_mb_offset;
         u32 cpu2ppu_irq;
-        u32 cpu2ppu_irq_ack;
+        u32 ppu2cpu_irq_ack;
         u32 reserved32[13];
 
         u32 apu2ppu_mb_offset;
         u32 apu2ppu_irq;
-        u32 apu2ppu_irq_ack;
+        u32 ppu2apu_irq_ack;
         u32 reserved33[13];
 
         u32 hpu2ppu_mb_offset;
         u32 hpu2ppu_irq;
-        u32 hpu2ppu_irq_ack;
+        u32 ppu2hpu_irq_ack;
         u32 reserved34[13];
 
         u32 epu2ppu_mb_offset;
         u32 epu2ppu_irq;
-        u32 epu2ppu_irq_ack;
+        u32 ppu2epu_irq_ack;
         u32 reserved35[13];
         u32 reserved36[8];
 
@@ -228,22 +228,22 @@ struct cx18_scb {
         u32 reserved41[7];
         u32 cpu2epu_mb_offset;
         u32 cpu2epu_irq;
-        u32 cpu2epu_irq_ack;
+        u32 epu2cpu_irq_ack;
         u32 reserved42[13];
 
         u32 apu2epu_mb_offset;
         u32 apu2epu_irq;
-        u32 apu2epu_irq_ack;
+        u32 epu2apu_irq_ack;
         u32 reserved43[13];
 
         u32 hpu2epu_mb_offset;
         u32 hpu2epu_irq;
-        u32 hpu2epu_irq_ack;
+        u32 epu2hpu_irq_ack;
         u32 reserved44[13];
 
         u32 ppu2epu_mb_offset;
         u32 ppu2epu_irq;
-        u32 ppu2epu_irq_ack;
+        u32 epu2ppu_irq_ack;
         u32 reserved45[13];
         u32 reserved46[8];
 
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 078be6319556..d3ae5b4dfca7 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -1078,7 +1078,7 @@ static int mpeg_open(struct inode *inode, struct file *file)
                 }
         }
 
-        if (blackbird_initialize_codec(dev) < 0) {
+        if (!atomic_read(&dev->core->mpeg_users) && blackbird_initialize_codec(dev) < 0) {
                 if (drv)
                         drv->request_release(drv);
                 unlock_kernel();
@@ -1109,6 +1109,8 @@ static int mpeg_open(struct inode *inode, struct file *file)
                         fh->mpegq.field);
         unlock_kernel();
 
+        atomic_inc(&dev->core->mpeg_users);
+
         return 0;
 }
 
@@ -1118,7 +1120,7 @@ static int mpeg_release(struct inode *inode, struct file *file)
         struct cx8802_dev *dev = fh->dev;
         struct cx8802_driver *drv = NULL;
 
-        if (dev->mpeg_active)
+        if (dev->mpeg_active && atomic_read(&dev->core->mpeg_users) == 1)
                 blackbird_stop_codec(dev);
 
         cx8802_cancel_buffers(fh->dev);
@@ -1138,6 +1140,8 @@ static int mpeg_release(struct inode *inode, struct file *file)
         if (drv)
                 drv->request_release(drv);
 
+        atomic_dec(&dev->core->mpeg_users);
+
         return 0;
 }
 
@@ -1158,6 +1162,10 @@ static unsigned int
 mpeg_poll(struct file *file, struct poll_table_struct *wait)
 {
         struct cx8802_fh *fh = file->private_data;
+        struct cx8802_dev *dev = fh->dev;
+
+        if (!dev->mpeg_active)
+                blackbird_start_codec(file, fh);
 
         return videobuf_poll_stream(file, &fh->mpegq, wait);
 }
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index cf6c30d4e545..309ca5e68063 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -598,6 +598,11 @@ static int dvb_register(struct cx8802_dev *dev)
         struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
         int mfe_shared = 0; /* bus not shared by default */
 
+        if (0 != core->i2c_rc) {
+                printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name);
+                goto frontend_detach;
+        }
+
         /* Get the first frontend */
         fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
         if (!fe0)
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index a1c435b4b1cd..3ebdcd1d83f8 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -769,10 +769,6 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev,
         struct cx8802_dev *dev;
         struct cx88_core  *core;
         int err;
-#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
-        struct videobuf_dvb_frontend *demod;
-        int i;
-#endif
 
         /* general setup */
         core = cx88_core_get(pci_dev);
@@ -803,15 +799,21 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev,
         mutex_init(&dev->frontends.lock);
         INIT_LIST_HEAD(&dev->frontends.felist);
 
-        if (core->board.num_frontends)
-                printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends);
-
-        for (i = 1; i <= core->board.num_frontends; i++) {
-                demod = videobuf_dvb_alloc_frontend(&dev->frontends, i);
-                if(demod == NULL) {
-                        printk(KERN_ERR "%s() failed to alloc\n", __func__);
-                        err = -ENOMEM;
-                        goto fail_free;
+        if (core->board.num_frontends) {
+                struct videobuf_dvb_frontend *fe;
+                int i;
+
+                printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__,
+                        core->board.num_frontends);
+                for (i = 1; i <= core->board.num_frontends; i++) {
+                        fe = videobuf_dvb_alloc_frontend(&dev->frontends, i);
+                        if(fe == NULL) {
+                                printk(KERN_ERR "%s() failed to alloc\n",
+                                        __func__);
+                                videobuf_dvb_dealloc_frontends(&dev->frontends);
+                                err = -ENOMEM;
+                                goto fail_free;
+                        }
                 }
         }
 #endif
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 61265fd04d56..b96ce991d968 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1216,8 +1216,12 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
         struct cx8800_fh  *fh   = priv;
         struct cx8800_dev *dev  = fh->dev;
 
-        if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE))
+        /* We should remember that this driver also supports teletext,  */
+        /* so we have to test if the v4l2_buf_type is VBI capture data. */
+        if (unlikely((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+                     (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE)))
                 return -EINVAL;
+
         if (unlikely(i != fh->type))
                 return -EINVAL;
 
@@ -1232,8 +1236,10 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
         struct cx8800_dev *dev  = fh->dev;
         int               err, res;
 
-        if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+        if ((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+            (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE))
                 return -EINVAL;
+
         if (i != fh->type)
                 return -EINVAL;
 
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index 76207c2856b7..f4240965be32 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -352,6 +352,7 @@ struct cx88_core {
         /* various v4l controls */
         u32                        freq;
         atomic_t                   users;
+        atomic_t                   mpeg_users;
 
         /* cx88-video needs to access cx8802 for hybrid tuner pll access. */
         struct cx8802_dev          *dvbdev;
diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 4d0817471c9f..6b557c057fac 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -3,16 +3,16 @@ menuconfig USB_GSPCA
         depends on VIDEO_V4L2
         default m
         ---help---
-        Say Y here if you want to enable selecting webcams based
-        on the GSPCA framework.
+          Say Y here if you want to enable selecting webcams based
+          on the GSPCA framework.
 
-        See <file:Documentation/video4linux/gspca.txt> for more info.
+          See <file:Documentation/video4linux/gspca.txt> for more info.
 
-        This driver uses the Video For Linux API. You must say Y or M to
-        "Video For Linux" to use this driver.
+          This driver uses the Video For Linux API. You must say Y or M to
+          "Video For Linux" to use this driver.
 
-        To compile this driver as modules, choose M here: the
-        modules will be called gspca_main.
+          To compile this driver as modules, choose M here: the
+          modules will be called gspca_main.
 
 
 if USB_GSPCA && VIDEO_V4L2
@@ -23,190 +23,190 @@ config USB_GSPCA_CONEX
         tristate "Conexant Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the Conexant chip.
+          Say Y here if you want support for cameras based on the Conexant chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_conex.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_conex.
 
 config USB_GSPCA_ETOMS
         tristate "Etoms USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the Etoms chip.
+          Say Y here if you want support for cameras based on the Etoms chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_etoms.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_etoms.
 
 config USB_GSPCA_FINEPIX
         tristate "Fujifilm FinePix USB V4L2 driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the FinePix chip.
+          Say Y here if you want support for cameras based on the FinePix chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_finepix.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_finepix.
 
 config USB_GSPCA_MARS
         tristate "Mars USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the Mars chip.
+          Say Y here if you want support for cameras based on the Mars chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_mars.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_mars.
 
 config USB_GSPCA_OV519
         tristate "OV519 USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the OV519 chip.
+          Say Y here if you want support for cameras based on the OV519 chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_ov519.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_ov519.
 
 config USB_GSPCA_PAC207
         tristate "Pixart PAC207 USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the PAC207 chip.
+          Say Y here if you want support for cameras based on the PAC207 chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_pac207.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_pac207.
 
 config USB_GSPCA_PAC7311
         tristate "Pixart PAC7311 USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the PAC7311 chip.
+          Say Y here if you want support for cameras based on the PAC7311 chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_pac7311.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_pac7311.
 
 config USB_GSPCA_SONIXB
         tristate "SN9C102 USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the SONIXB chip.
+          Say Y here if you want support for cameras based on the SONIXB chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_sonixb.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_sonixb.
 
 config USB_GSPCA_SONIXJ
         tristate "SONIX JPEG USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the SONIXJ chip.
+          Say Y here if you want support for cameras based on the SONIXJ chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_sonixj
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_sonixj
 
 config USB_GSPCA_SPCA500
         tristate "SPCA500 USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the SPCA500 chip.
+          Say Y here if you want support for cameras based on the SPCA500 chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_spca500.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_spca500.
 
 config USB_GSPCA_SPCA501
         tristate "SPCA501 USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the SPCA501 chip.
+          Say Y here if you want support for cameras based on the SPCA501 chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_spca501.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_spca501.
 
 config USB_GSPCA_SPCA505
         tristate "SPCA505 USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the SPCA505 chip.
+          Say Y here if you want support for cameras based on the SPCA505 chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_spca505.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_spca505.
 
 config USB_GSPCA_SPCA506
         tristate "SPCA506 USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the SPCA506 chip.
+          Say Y here if you want support for cameras based on the SPCA506 chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_spca506.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_spca506.
 
 config USB_GSPCA_SPCA508
         tristate "SPCA508 USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the SPCA508 chip.
+          Say Y here if you want support for cameras based on the SPCA508 chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_spca508.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_spca508.
 
 config USB_GSPCA_SPCA561
         tristate "SPCA561 USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the SPCA561 chip.
+          Say Y here if you want support for cameras based on the SPCA561 chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_spca561.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_spca561.
 
 config USB_GSPCA_STK014
         tristate "Syntek DV4000 (STK014) USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the STK014 chip.
+          Say Y here if you want support for cameras based on the STK014 chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_stk014.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_stk014.
 
 config USB_GSPCA_SUNPLUS
         tristate "SUNPLUS USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the Sunplus
-        SPCA504(abc) SPCA533 SPCA536 chips.
+          Say Y here if you want support for cameras based on the Sunplus
+          SPCA504(abc) SPCA533 SPCA536 chips.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_spca5xx.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_spca5xx.
 
 config USB_GSPCA_T613
         tristate "T613 (JPEG Compliance) USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the T613 chip.
+          Say Y here if you want support for cameras based on the T613 chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_t613.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_t613.
 
 config USB_GSPCA_TV8532
         tristate "TV8532 USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the TV8531 chip.
+          Say Y here if you want support for cameras based on the TV8531 chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_tv8532.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_tv8532.
 
 config USB_GSPCA_VC032X
         tristate "VC032X USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the VC032X chip.
+          Say Y here if you want support for cameras based on the VC032X chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_vc032x.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_vc032x.
 
 config USB_GSPCA_ZC3XX
-        tristate "VC3xx USB Camera Driver"
+        tristate "ZC3XX USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
         help
-        Say Y here if you want support for cameras based on the ZC3XX chip.
+          Say Y here if you want support for cameras based on the ZC3XX chip.
 
-        To compile this driver as a module, choose M here: the
-        module will be called gspca_zc3xx.
+          To compile this driver as a module, choose M here: the
+          module will be called gspca_zc3xx.
 
 endif
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index d0a4451dc46f..8b3101d347c3 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -2266,7 +2266,7 @@ static const struct usb_action hdcs2020b_NoFliker[] = {
         {}
 };
 
-static const struct usb_action hv7131bxx_Initial[] = {
+static const struct usb_action hv7131bxx_Initial[] = {          /* 320x240 */
         {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
         {0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
         {0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT},
@@ -2290,7 +2290,7 @@ static const struct usb_action hv7131bxx_Initial[] = {
         {0xaa, 0x14, 0x0001},
         {0xaa, 0x15, 0x00e8},
         {0xaa, 0x16, 0x0002},
-        {0xaa, 0x17, 0x0086},
+        {0xaa, 0x17, 0x0086},           /* 00,17,88,aa */
         {0xaa, 0x31, 0x0038},
         {0xaa, 0x32, 0x0038},
         {0xaa, 0x33, 0x0038},
@@ -2309,7 +2309,7 @@ static const struct usb_action hv7131bxx_Initial[] = {
         {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
         {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
         {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
-        {0xaa, 0x02, 0x0080},   /* {0xaa, 0x02, 0x0090}; */
+        {0xaa, 0x02, 0x0090},                   /* 00,02,80,aa */
         {0xa1, 0x01, 0x0002},
         {0xa0, 0x00, ZC3XX_R092_I2CADDRESSSELECT},
         {0xa0, 0x02, ZC3XX_R090_I2CCOMMAND},
@@ -2374,7 +2374,7 @@ static const struct usb_action hv7131bxx_Initial[] = {
         {}
 };
 
-static const struct usb_action hv7131bxx_InitialScale[] = {
+static const struct usb_action hv7131bxx_InitialScale[] = {     /* 640x480*/
         {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
         {0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
         {0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT},
@@ -6388,6 +6388,8 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 /*fixme: is it really write to 011d and 018d for all other sensors? */
         brightness = sd->brightness;
         reg_w(gspca_dev->dev, brightness, 0x011d);
+        if (sd->sensor == SENSOR_HV7131B)
+                return;
         if (brightness < 0x70)
                 brightness += 0x10;
         else
@@ -6529,6 +6531,7 @@ static void setquality(struct gspca_dev *gspca_dev)
 
         switch (sd->sensor) {
         case SENSOR_GC0305:
+        case SENSOR_HV7131B:
         case SENSOR_OV7620:
         case SENSOR_PO2030:
                 return;
@@ -7209,7 +7212,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
         mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
         zc3_init = init_tb[(int) sd->sensor][mode];
         switch (sd->sensor) {
-        case SENSOR_HV7131B:
         case SENSOR_HV7131C:
                 zcxx_probeSensor(gspca_dev);
                 break;
diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig
index 0069898bddab..c46bfb1569e3 100644
--- a/drivers/media/video/ivtv/Kconfig
+++ b/drivers/media/video/ivtv/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_IVTV
         tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
-        depends on VIDEO_V4L1 && VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL
+        depends on VIDEO_V4L2 && PCI && I2C
         depends on INPUT   # due to VIDEO_IR
         select I2C_ALGOBIT
         select VIDEO_IR
@@ -12,7 +12,6 @@ config VIDEO_IVTV
         select VIDEO_SAA711X
         select VIDEO_SAA717X
         select VIDEO_SAA7127
-        select VIDEO_TVAUDIO
         select VIDEO_CS53L32A
         select VIDEO_M52790
         select VIDEO_WM8775
@@ -32,7 +31,7 @@ config VIDEO_IVTV
 
 config VIDEO_FB_IVTV
         tristate "Conexant cx23415 framebuffer support"
-        depends on VIDEO_IVTV && FB && EXPERIMENTAL
+        depends on VIDEO_IVTV && FB
         select FB_CFB_FILLRECT
         select FB_CFB_COPYAREA
         select FB_CFB_IMAGEBLIT
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index d36485023b68..b69cc1d55e5b 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -875,43 +875,43 @@ static void ivtv_load_and_init_modules(struct ivtv *itv)
 
 #ifdef MODULE
         /* load modules */
-#ifndef CONFIG_MEDIA_TUNER
+#ifdef CONFIG_MEDIA_TUNER_MODULE
         hw = ivtv_request_module(itv, hw, "tuner", IVTV_HW_TUNER);
 #endif
-#ifndef CONFIG_VIDEO_CX25840
+#ifdef CONFIG_VIDEO_CX25840_MODULE
         hw = ivtv_request_module(itv, hw, "cx25840", IVTV_HW_CX25840);
 #endif
-#ifndef CONFIG_VIDEO_SAA711X
+#ifdef CONFIG_VIDEO_SAA711X_MODULE
         hw = ivtv_request_module(itv, hw, "saa7115", IVTV_HW_SAA711X);
 #endif
-#ifndef CONFIG_VIDEO_SAA7127
+#ifdef CONFIG_VIDEO_SAA7127_MODULE
         hw = ivtv_request_module(itv, hw, "saa7127", IVTV_HW_SAA7127);
 #endif
-#ifndef CONFIG_VIDEO_SAA717X
+#ifdef CONFIG_VIDEO_SAA717X_MODULE
         hw = ivtv_request_module(itv, hw, "saa717x", IVTV_HW_SAA717X);
 #endif
-#ifndef CONFIG_VIDEO_UPD64031A
+#ifdef CONFIG_VIDEO_UPD64031A_MODULE
         hw = ivtv_request_module(itv, hw, "upd64031a", IVTV_HW_UPD64031A);
 #endif
-#ifndef CONFIG_VIDEO_UPD64083
+#ifdef CONFIG_VIDEO_UPD64083_MODULE
         hw = ivtv_request_module(itv, hw, "upd64083", IVTV_HW_UPD6408X);
 #endif
-#ifndef CONFIG_VIDEO_MSP3400
+#ifdef CONFIG_VIDEO_MSP3400_MODULE
         hw = ivtv_request_module(itv, hw, "msp3400", IVTV_HW_MSP34XX);
 #endif
-#ifndef CONFIG_VIDEO_VP27SMPX
+#ifdef CONFIG_VIDEO_VP27SMPX_MODULE
         hw = ivtv_request_module(itv, hw, "vp27smpx", IVTV_HW_VP27SMPX);
 #endif
-#ifndef CONFIG_VIDEO_WM8775
+#ifdef CONFIG_VIDEO_WM8775_MODULE
         hw = ivtv_request_module(itv, hw, "wm8775", IVTV_HW_WM8775);
 #endif
-#ifndef CONFIG_VIDEO_WM8739
+#ifdef CONFIG_VIDEO_WM8739_MODULE
         hw = ivtv_request_module(itv, hw, "wm8739", IVTV_HW_WM8739);
 #endif
-#ifndef CONFIG_VIDEO_CS53L32A
+#ifdef CONFIG_VIDEO_CS53L32A_MODULE
         hw = ivtv_request_module(itv, hw, "cs53l32a", IVTV_HW_CS53L32A);
 #endif
-#ifndef CONFIG_VIDEO_M52790
+#ifdef CONFIG_VIDEO_M52790_MODULE
         hw = ivtv_request_module(itv, hw, "m52790", IVTV_HW_M52790);
 #endif
 #endif
diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c
index adf2ba79496a..37860698f782 100644
--- a/drivers/media/video/saa7110.c
+++ b/drivers/media/video/saa7110.c
@@ -47,7 +47,7 @@ module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "Debug level (0-1)");
 
 #define SAA7110_MAX_INPUT       9       /* 6 CVBS, 3 SVHS */
-#define SAA7110_MAX_OUTPUT      0       /* its a decoder only */
+#define SAA7110_MAX_OUTPUT      1       /* 1 YUV */
 
 #define SAA7110_NR_REG          0x35
 
@@ -327,7 +327,7 @@ saa7110_command (struct i2c_client *client,
 
         case DECODER_SET_INPUT:
                 v = *(int *) arg;
-                if (v < 0 || v > SAA7110_MAX_INPUT) {
+                if (v < 0 || v >= SAA7110_MAX_INPUT) {
                         v4l_dbg(1, debug, client, "input=%d not available\n", v);
                         return -EINVAL;
                 }
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 249184452949..dfbe08a9ad9b 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -941,7 +941,8 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
                        dev->name,(unsigned long long)pci_resource_start(pci_dev,0));
                 goto fail1;
         }
-        dev->lmmio = ioremap(pci_resource_start(pci_dev,0), 0x1000);
+        dev->lmmio = ioremap(pci_resource_start(pci_dev, 0),
+                             pci_resource_len(pci_dev, 0));
         dev->bmmio = (__u8 __iomem *)dev->lmmio;
         if (NULL == dev->lmmio) {
                 err = -EIO;
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index b59e47272abf..3720f0e03a16 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -1,5 +1,5 @@
 /*
- * experimental driver for simple i2c audio chips.
+ * Driver for simple i2c audio chips.
  *
  * Copyright (c) 2000 Gerd Knorr
  * based on code by:
@@ -7,6 +7,10 @@
  *   Steve VanDeBogart (vandebo@uclink.berkeley.edu)
  *   Greg Alexander (galexand@acm.org)
  *
+ * Copyright(c) 2005-2008 Mauro Carvalho Chehab
+ *      - Some cleanups, code fixes, etc
+ *      - Convert it to V4L2 API
+ *
  * This code is placed under the terms of the GNU General Public License
  *
  * OPTIONS:
@@ -30,6 +34,7 @@
 
 #include <media/tvaudio.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-i2c-drv-legacy.h>
 
@@ -58,7 +63,6 @@ typedef int  (*checkit)(struct CHIPSTATE*);
 typedef int  (*initialize)(struct CHIPSTATE*);
 typedef int  (*getmode)(struct CHIPSTATE*);
 typedef void (*setmode)(struct CHIPSTATE*, int mode);
-typedef void (*checkmode)(struct CHIPSTATE*);
 
 /* i2c command */
 typedef struct AUDIOCMD {
@@ -79,6 +83,7 @@ struct CHIPDESC {
 #define CHIP_HAS_VOLUME      1
 #define CHIP_HAS_BASSTREBLE  2
 #define CHIP_HAS_INPUTSEL    4
+#define CHIP_NEED_CHECKMODE  8
 
         /* various i2c command sequences */
         audiocmd   init;
@@ -96,23 +101,20 @@ struct CHIPDESC {
         getmode  getmode;
         setmode  setmode;
 
-        /* check / autoswitch audio after channel switches */
-        checkmode  checkmode;
-
         /* input switch register + values for v4l inputs */
         int  inputreg;
         int  inputmap[4];
         int  inputmute;
         int  inputmask;
 };
-static struct CHIPDESC chiplist[];
 
 /* current state of the chip */
 struct CHIPSTATE {
         struct i2c_client *c;
 
-        /* index into CHIPDESC array */
-        int type;
+        /* chip-specific description - should point to
+           an entry at CHIPDESC table */
+        struct CHIPDESC *desc;
 
         /* shadow register set */
         audiocmd   shadow;
@@ -152,7 +154,7 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val)
 {
         unsigned char buffer[2];
 
-        if (-1 == subaddr) {
+        if (subaddr < 0) {
                 v4l_dbg(1, debug, chip->c, "%s: chip_write: 0x%x\n",
                         chip->c->name, val);
                 chip->shadow.bytes[1] = val;
@@ -163,6 +165,13 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val)
                         return -1;
                 }
         } else {
+                if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) {
+                        v4l_info(chip->c,
+                                "Tried to access a non-existent register: %d\n",
+                                subaddr);
+                        return -EINVAL;
+                }
+
                 v4l_dbg(1, debug, chip->c, "%s: chip_write: reg%d=0x%x\n",
                         chip->c->name, subaddr, val);
                 chip->shadow.bytes[subaddr+1] = val;
@@ -177,12 +186,20 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val)
         return 0;
 }
 
-static int chip_write_masked(struct CHIPSTATE *chip, int subaddr, int val, int mask)
+static int chip_write_masked(struct CHIPSTATE *chip,
+                             int subaddr, int val, int mask)
 {
         if (mask != 0) {
-                if (-1 == subaddr) {
+                if (subaddr < 0) {
                         val = (chip->shadow.bytes[1] & ~mask) | (val & mask);
                 } else {
+                        if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) {
+                                v4l_info(chip->c,
+                                        "Tried to access a non-existent register: %d\n",
+                                        subaddr);
+                                return -EINVAL;
+                        }
+
                         val = (chip->shadow.bytes[subaddr+1] & ~mask) | (val & mask);
                 }
         }
@@ -228,6 +245,15 @@ static int chip_cmd(struct CHIPSTATE *chip, char *name, audiocmd *cmd)
         if (0 == cmd->count)
                 return 0;
 
+        if (cmd->count + cmd->bytes[0] - 1 >= ARRAY_SIZE(chip->shadow.bytes)) {
+                v4l_info(chip->c,
+                         "Tried to access a non-existent register range: %d to %d\n",
+                         cmd->bytes[0] + 1, cmd->bytes[0] + cmd->count - 1);
+                return -EINVAL;
+        }
+
+        /* FIXME: it seems that the shadow bytes are wrong bellow !*/
+
         /* update our shadow register set; print bytes if (debug > 0) */
         v4l_dbg(1, debug, chip->c, "%s: chip_cmd(%s): reg=%d, data:",
                 chip->c->name, name,cmd->bytes[0]);
@@ -263,7 +289,8 @@ static void chip_thread_wake(unsigned long data)
 static int chip_thread(void *data)
 {
         struct CHIPSTATE *chip = data;
-        struct CHIPDESC  *desc = chiplist + chip->type;
+        struct CHIPDESC  *desc = chip->desc;
+        int mode;
 
         v4l_dbg(1, debug, chip->c, "%s: thread started\n", chip->c->name);
         set_freezable();
@@ -282,7 +309,26 @@ static int chip_thread(void *data)
                         continue;
 
                 /* have a look what's going on */
-                desc->checkmode(chip);
+                mode = desc->getmode(chip);
+                if (mode == chip->prevmode)
+                        continue;
+
+                /* chip detected a new audio mode - set it */
+                v4l_dbg(1, debug, chip->c, "%s: thread checkmode\n",
+                        chip->c->name);
+
+                chip->prevmode = mode;
+
+                if (mode & V4L2_TUNER_MODE_STEREO)
+                        desc->setmode(chip, V4L2_TUNER_MODE_STEREO);
+                if (mode & V4L2_TUNER_MODE_LANG1_LANG2)
+                        desc->setmode(chip, V4L2_TUNER_MODE_STEREO);
+                else if (mode & V4L2_TUNER_MODE_LANG1)
+                        desc->setmode(chip, V4L2_TUNER_MODE_LANG1);
+                else if (mode & V4L2_TUNER_MODE_LANG2)
+                        desc->setmode(chip, V4L2_TUNER_MODE_LANG2);
+                else
+                        desc->setmode(chip, V4L2_TUNER_MODE_MONO);
 
                 /* schedule next check */
                 mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000));
@@ -292,29 +338,6 @@ static int chip_thread(void *data)
         return 0;
 }
 
-static void generic_checkmode(struct CHIPSTATE *chip)
-{
-        struct CHIPDESC  *desc = chiplist + chip->type;
-        int mode = desc->getmode(chip);
-
-        if (mode == chip->prevmode)
-        return;
-
-        v4l_dbg(1, debug, chip->c, "%s: thread checkmode\n", chip->c->name);
-        chip->prevmode = mode;
-
-        if (mode & V4L2_TUNER_MODE_STEREO)
-                desc->setmode(chip,V4L2_TUNER_MODE_STEREO);
-        if (mode & V4L2_TUNER_MODE_LANG1_LANG2)
-                desc->setmode(chip,V4L2_TUNER_MODE_STEREO);
-        else if (mode & V4L2_TUNER_MODE_LANG1)
-                desc->setmode(chip,V4L2_TUNER_MODE_LANG1);
-        else if (mode & V4L2_TUNER_MODE_LANG2)
-                desc->setmode(chip,V4L2_TUNER_MODE_LANG2);
-        else
-                desc->setmode(chip,V4L2_TUNER_MODE_MONO);
-}
-
 /* ---------------------------------------------------------------------- */
 /* audio chip descriptions - defines+functions for tda9840                */
 
@@ -777,7 +800,7 @@ static struct tda9874a_MODES {
         char *name;
         audiocmd cmd;
 } tda9874a_modelist[9] = {
-  {     "A2, B/G",
+  {     "A2, B/G", /* default */
         { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x77,0xA0,0x00, 0x00,0x00 }} },
   {     "A2, M (Korea)",
         { 9, { TDA9874A_C1FRA, 0x5D,0xC0,0x00, 0x62,0x6A,0xAA, 0x20,0x22 }} },
@@ -791,7 +814,7 @@ static struct tda9874a_MODES {
         { 9, { TDA9874A_C1FRA, 0x7D,0x00,0x00, 0x88,0x8A,0xAA, 0x08,0x33 }} },
   {     "NICAM, B/G",
         { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x79,0xEA,0xAA, 0x08,0x33 }} },
-  {     "NICAM, D/K", /* default */
+  {     "NICAM, D/K",
         { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x08,0x33 }} },
   {     "NICAM, L",
         { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x09,0x33 }} }
@@ -981,7 +1004,7 @@ static int tda9874a_initialize(struct CHIPSTATE *chip)
 {
         if (tda9874a_SIF > 2)
                 tda9874a_SIF = 1;
-        if (tda9874a_STD > 8)
+        if (tda9874a_STD >= ARRAY_SIZE(tda9874a_modelist))
                 tda9874a_STD = 0;
         if(tda9874a_AMSEL > 1)
                 tda9874a_AMSEL = 0;
@@ -1089,7 +1112,7 @@ static int tda8425_shift12(int val) { return (val >> 12) | 0xf0; }
 
 static int tda8425_initialize(struct CHIPSTATE *chip)
 {
-        struct CHIPDESC *desc = chiplist + chip->type;
+        struct CHIPDESC *desc = chip->desc;
         int inputmap[4] = { /* tuner    */ TDA8425_S1_CH2, /* radio  */ TDA8425_S1_CH1,
                             /* extern   */ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF};
 
@@ -1259,27 +1282,28 @@ static struct CHIPDESC chiplist[] = {
                 .addr_lo    = I2C_ADDR_TDA9840 >> 1,
                 .addr_hi    = I2C_ADDR_TDA9840 >> 1,
                 .registers  = 5,
+                .flags      = CHIP_NEED_CHECKMODE,
 
+                /* callbacks */
                 .checkit    = tda9840_checkit,
                 .getmode    = tda9840_getmode,
                 .setmode    = tda9840_setmode,
-                .checkmode  = generic_checkmode,
 
                 .init       = { 2, { TDA9840_TEST, TDA9840_TEST_INT1SN
                                 /* ,TDA9840_SW, TDA9840_MONO */} }
         },
         {
                 .name       = "tda9873h",
-                .checkit    = tda9873_checkit,
                 .insmodopt  = &tda9873,
                 .addr_lo    = I2C_ADDR_TDA985x_L >> 1,
                 .addr_hi    = I2C_ADDR_TDA985x_H >> 1,
                 .registers  = 3,
-                .flags      = CHIP_HAS_INPUTSEL,
+                .flags      = CHIP_HAS_INPUTSEL | CHIP_NEED_CHECKMODE,
 
+                /* callbacks */
+                .checkit    = tda9873_checkit,
                 .getmode    = tda9873_getmode,
                 .setmode    = tda9873_setmode,
-                .checkmode  = generic_checkmode,
 
                 .init       = { 4, { TDA9873_SW, 0xa4, 0x06, 0x03 } },
                 .inputreg   = TDA9873_SW,
@@ -1290,15 +1314,16 @@ static struct CHIPDESC chiplist[] = {
         },
         {
                 .name       = "tda9874h/a",
-                .checkit    = tda9874a_checkit,
-                .initialize = tda9874a_initialize,
                 .insmodopt  = &tda9874a,
                 .addr_lo    = I2C_ADDR_TDA9874 >> 1,
                 .addr_hi    = I2C_ADDR_TDA9874 >> 1,
+                .flags      = CHIP_NEED_CHECKMODE,
 
+                /* callbacks */
+                .initialize = tda9874a_initialize,
+                .checkit    = tda9874a_checkit,
                 .getmode    = tda9874a_getmode,
                 .setmode    = tda9874a_setmode,
-                .checkmode  = generic_checkmode,
         },
         {
                 .name       = "tda9850",
@@ -1324,10 +1349,11 @@ static struct CHIPDESC chiplist[] = {
                 .rightreg   = TDA9855_VR,
                 .bassreg    = TDA9855_BA,
                 .treblereg  = TDA9855_TR,
+
+                /* callbacks */
                 .volfunc    = tda9855_volume,
                 .bassfunc   = tda9855_bass,
                 .treblefunc = tda9855_treble,
-
                 .getmode    = tda985x_getmode,
                 .setmode    = tda985x_setmode,
 
@@ -1348,6 +1374,8 @@ static struct CHIPDESC chiplist[] = {
                 .rightreg   = TEA6300_VL,
                 .bassreg    = TEA6300_BA,
                 .treblereg  = TEA6300_TR,
+
+                /* callbacks */
                 .volfunc    = tea6300_shift10,
                 .bassfunc   = tea6300_shift12,
                 .treblefunc = tea6300_shift12,
@@ -1358,7 +1386,6 @@ static struct CHIPDESC chiplist[] = {
         },
         {
                 .name       = "tea6320",
-                .initialize = tea6320_initialize,
                 .insmodopt  = &tea6320,
                 .addr_lo    = I2C_ADDR_TEA6300 >> 1,
                 .addr_hi    = I2C_ADDR_TEA6300 >> 1,
@@ -1369,6 +1396,9 @@ static struct CHIPDESC chiplist[] = {
                 .rightreg   = TEA6320_V,
                 .bassreg    = TEA6320_BA,
                 .treblereg  = TEA6320_TR,
+
+                /* callbacks */
+                .initialize = tea6320_initialize,
                 .volfunc    = tea6320_volume,
                 .bassfunc   = tea6320_shift11,
                 .treblefunc = tea6320_shift11,
@@ -1401,16 +1431,18 @@ static struct CHIPDESC chiplist[] = {
                 .rightreg   = TDA8425_VR,
                 .bassreg    = TDA8425_BA,
                 .treblereg  = TDA8425_TR,
+
+                /* callbacks */
+                .initialize = tda8425_initialize,
                 .volfunc    = tda8425_shift10,
                 .bassfunc   = tda8425_shift12,
                 .treblefunc = tda8425_shift12,
+                .setmode    = tda8425_setmode,
 
                 .inputreg   = TDA8425_S1,
                 .inputmap   = { TDA8425_S1_CH1, TDA8425_S1_CH1, TDA8425_S1_CH1 },
                 .inputmute  = TDA8425_S1_OFF,
 
-                .setmode    = tda8425_setmode,
-                .initialize = tda8425_initialize,
         },
         {
                 .name       = "pic16c54 (PV951)",
@@ -1434,10 +1466,11 @@ static struct CHIPDESC chiplist[] = {
                 .addr_lo    = I2C_ADDR_TDA9840 >> 1,
                 .addr_hi    = I2C_ADDR_TDA9840 >> 1,
                 .registers  = 2,
+                .flags      = CHIP_NEED_CHECKMODE,
 
+                /* callbacks */
                 .getmode    = ta8874z_getmode,
                 .setmode    = ta8874z_setmode,
-                .checkmode  = generic_checkmode,
 
                 .init       = {2, { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}},
         },
@@ -1481,6 +1514,7 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id)
         }
         if (desc->name == NULL) {
                 v4l_dbg(1, debug, client, "no matching chip description found\n");
+                kfree(chip);
                 return -EIO;
         }
         v4l_info(client, "%s found @ 0x%x (%s)\n", desc->name, client->addr<<1, client->adapter->name);
@@ -1494,7 +1528,7 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id)
         /* fill required data structures */
         if (!id)
                 strlcpy(client->name, desc->name, I2C_NAME_SIZE);
-        chip->type = desc-chiplist;
+        chip->desc = desc;
         chip->shadow.count = desc->registers+1;
         chip->prevmode = -1;
         chip->audmode = V4L2_TUNER_MODE_LANG1;
@@ -1506,20 +1540,49 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id)
                 chip_cmd(chip,"init",&desc->init);
 
         if (desc->flags & CHIP_HAS_VOLUME) {
-                chip->left   = desc->leftinit   ? desc->leftinit   : 65535;
-                chip->right  = desc->rightinit  ? desc->rightinit  : 65535;
-                chip_write(chip,desc->leftreg,desc->volfunc(chip->left));
-                chip_write(chip,desc->rightreg,desc->volfunc(chip->right));
+                if (!desc->volfunc) {
+                        /* This shouldn't be happen. Warn user, but keep working
+                           without volume controls
+                         */
+                        v4l_info(chip->c, "volume callback undefined!\n");
+                        desc->flags &= ~CHIP_HAS_VOLUME;
+                } else {
+                        chip->left  = desc->leftinit  ? desc->leftinit  : 65535;
+                        chip->right = desc->rightinit ? desc->rightinit : 65535;
+                        chip_write(chip, desc->leftreg,
+                                   desc->volfunc(chip->left));
+                        chip_write(chip, desc->rightreg,
+                                   desc->volfunc(chip->right));
+                }
         }
         if (desc->flags & CHIP_HAS_BASSTREBLE) {
-                chip->treble = desc->trebleinit ? desc->trebleinit : 32768;
-                chip->bass   = desc->bassinit   ? desc->bassinit   : 32768;
-                chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass));
-                chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble));
+                if (!desc->bassfunc || !desc->treblefunc) {
+                        /* This shouldn't be happen. Warn user, but keep working
+                           without bass/treble controls
+                         */
+                        v4l_info(chip->c, "bass/treble callbacks undefined!\n");
+                        desc->flags &= ~CHIP_HAS_BASSTREBLE;
+                } else {
+                        chip->treble = desc->trebleinit ?
+                                                desc->trebleinit : 32768;
+                        chip->bass   = desc->bassinit   ?
+                                                desc->bassinit   : 32768;
+                        chip_write(chip, desc->bassreg,
+                                   desc->bassfunc(chip->bass));
+                        chip_write(chip, desc->treblereg,
+                                   desc->treblefunc(chip->treble));
+                }
         }
 
         chip->thread = NULL;
-        if (desc->checkmode) {
+        if (desc->flags & CHIP_NEED_CHECKMODE) {
+                if (!desc->getmode || !desc->setmode) {
+                        /* This shouldn't be happen. Warn user, but keep working
+                           without kthread
+                         */
+                        v4l_info(chip->c, "set/get mode callbacks undefined!\n");
+                        return 0;
+                }
                 /* start async thread */
                 init_timer(&chip->wt);
                 chip->wt.function = chip_thread_wake;
@@ -1552,7 +1615,7 @@ static int chip_remove(struct i2c_client *client)
 static int tvaudio_get_ctrl(struct CHIPSTATE *chip,
                             struct v4l2_control *ctrl)
 {
-        struct CHIPDESC *desc = chiplist + chip->type;
+        struct CHIPDESC *desc = chip->desc;
 
         switch (ctrl->id) {
         case V4L2_CID_AUDIO_MUTE:
@@ -1576,13 +1639,13 @@ static int tvaudio_get_ctrl(struct CHIPSTATE *chip,
                 return 0;
         }
         case V4L2_CID_AUDIO_BASS:
-                if (desc->flags & CHIP_HAS_BASSTREBLE)
+                if (!(desc->flags & CHIP_HAS_BASSTREBLE))
                         break;
                 ctrl->value = chip->bass;
                 return 0;
         case V4L2_CID_AUDIO_TREBLE:
-                if (desc->flags & CHIP_HAS_BASSTREBLE)
-                        return -EINVAL;
+                if (!(desc->flags & CHIP_HAS_BASSTREBLE))
+                        break;
                 ctrl->value = chip->treble;
                 return 0;
         }
@@ -1592,7 +1655,7 @@ static int tvaudio_get_ctrl(struct CHIPSTATE *chip,
 static int tvaudio_set_ctrl(struct CHIPSTATE *chip,
                             struct v4l2_control *ctrl)
 {
-        struct CHIPDESC *desc = chiplist + chip->type;
+        struct CHIPDESC *desc = chip->desc;
 
         switch (ctrl->id) {
         case V4L2_CID_AUDIO_MUTE:
@@ -1642,16 +1705,15 @@ static int tvaudio_set_ctrl(struct CHIPSTATE *chip,
                 return 0;
         }
         case V4L2_CID_AUDIO_BASS:
-                if (desc->flags & CHIP_HAS_BASSTREBLE)
+                if (!(desc->flags & CHIP_HAS_BASSTREBLE))
                         break;
                 chip->bass = ctrl->value;
                 chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass));
 
                 return 0;
         case V4L2_CID_AUDIO_TREBLE:
-                if (desc->flags & CHIP_HAS_BASSTREBLE)
-                        return -EINVAL;
-
+                if (!(desc->flags & CHIP_HAS_BASSTREBLE))
+                        break;
                 chip->treble = ctrl->value;
                 chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble));
 
@@ -1668,9 +1730,12 @@ static int chip_command(struct i2c_client *client,
                         unsigned int cmd, void *arg)
 {
         struct CHIPSTATE *chip = i2c_get_clientdata(client);
-        struct CHIPDESC  *desc = chiplist + chip->type;
+        struct CHIPDESC  *desc = chip->desc;
 
-        v4l_dbg(1, debug, chip->c, "%s: chip_command 0x%x\n", chip->c->name, cmd);
+        if (debug > 0) {
+                v4l_i2c_print_ioctl(chip->c, cmd);
+                printk("\n");
+        }
 
         switch (cmd) {
         case AUDC_SET_RADIO:
@@ -1695,7 +1760,7 @@ static int chip_command(struct i2c_client *client,
                                 break;
                         case V4L2_CID_AUDIO_BASS:
                         case V4L2_CID_AUDIO_TREBLE:
-                                if (desc->flags & CHIP_HAS_BASSTREBLE)
+                                if (!(desc->flags & CHIP_HAS_BASSTREBLE))
                                         return -EINVAL;
                                 break;
                         default:
@@ -1792,12 +1857,20 @@ static int chip_command(struct i2c_client *client,
                 break;
         case VIDIOC_S_FREQUENCY:
                 chip->mode = 0; /* automatic */
-                if (desc->checkmode && desc->setmode) {
+
+                /* For chips that provide getmode and setmode, and doesn't
+                   automatically follows the stereo carrier, a kthread is
+                   created to set the audio standard. In this case, when then
+                   the video channel is changed, tvaudio starts on MONO mode.
+                   After waiting for 2 seconds, the kernel thread is called,
+                   to follow whatever audio standard is pointed by the
+                   audio carrier.
+                 */
+                if (chip->thread) {
                         desc->setmode(chip,V4L2_TUNER_MODE_MONO);
                         if (chip->prevmode != V4L2_TUNER_MODE_MONO)
                                 chip->prevmode = -1; /* reset previous mode */
                         mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000));
-                        /* the thread will call checkmode() later */
                 }
                 break;
 
@@ -1836,9 +1909,3 @@ static struct v4l2_i2c_driver_data v4l2_i2c_data = {
         .legacy_probe = chip_legacy_probe,
         .id_table = chip_id,
 };
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c
index 28421d386f1e..c710bcd1df48 100644
--- a/drivers/media/video/usbvideo/ibmcam.c
+++ b/drivers/media/video/usbvideo/ibmcam.c
@@ -3695,7 +3695,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *
         unsigned char video_ep = 0;
 
         if (debug >= 1)
-                dev_info(&uvd->dev->dev, "ibmcam_probe(%p,%u.)\n", intf, ifnum);
+                dev_info(&dev->dev, "ibmcam_probe(%p,%u.)\n", intf, ifnum);
 
         /* We don't handle multi-config cameras */
         if (dev->descriptor.bNumConfigurations != 1)
@@ -3746,7 +3746,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *
                         brand = "IBM PC Camera"; /* a.k.a. Xirlink C-It */
                         break;
                 }
-                dev_info(&uvd->dev->dev,
+                dev_info(&dev->dev,
                          "%s USB camera found (model %d, rev. 0x%04x)\n",
                          brand, model, le16_to_cpu(dev->descriptor.bcdDevice));
         } while (0);
@@ -3754,7 +3754,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *
         /* Validate found interface: must have one ISO endpoint */
         nas = intf->num_altsetting;
         if (debug > 0)
-                dev_info(&uvd->dev->dev, "Number of alternate settings=%d.\n",
+                dev_info(&dev->dev, "Number of alternate settings=%d.\n",
                          nas);
         if (nas < 2) {
                 err("Too few alternate settings for this camera!");
@@ -3799,7 +3799,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *
                                 actInterface = i;
                                 maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
                                 if (debug > 0)
-                                        dev_info(&uvd->dev->dev,
+                                        dev_info(&dev->dev,
                                                  "Active setting=%d. "
                                                  "maxPS=%d.\n", i, maxPS);
                         } else
@@ -3840,7 +3840,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *
                         RESTRICT_TO_RANGE(framerate, 0, 5);
                         break;
                 default:
-                        dev_info(&uvd->dev->dev, "IBM camera: using 320x240\n");
+                        dev_info(&dev->dev, "IBM camera: using 320x240\n");
                         size = SIZE_320x240;
                         /* No break here */
                 case SIZE_320x240:
@@ -3869,7 +3869,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *
                         canvasY = 120;
                         break;
                 default:
-                        dev_info(&uvd->dev->dev, "IBM NetCamera: using 176x144\n");
+                        dev_info(&dev->dev, "IBM NetCamera: using 176x144\n");
                         size = SIZE_176x144;
                         /* No break here */
                 case SIZE_176x144:
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index b57326ae464d..0b5bd85dfcec 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -267,7 +267,7 @@ static int da9030_mask_events(struct da903x_chip *chip, unsigned int events)
 {
         uint8_t v[3];
 
-        chip->events_mask &= ~events;
+        chip->events_mask |= events;
 
         v[0] = (chip->events_mask & 0xff);
         v[1] = (chip->events_mask >> 8) & 0xff;
diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c
index 8dfe21bb3bd1..3e0ce0e50ea2 100644
--- a/drivers/mfd/wm8350-i2c.c
+++ b/drivers/mfd/wm8350-i2c.c
@@ -30,7 +30,12 @@ static int wm8350_i2c_read_device(struct wm8350 *wm8350, char reg,
         ret = i2c_master_send(wm8350->i2c_client, &reg, 1);
         if (ret < 0)
                 return ret;
-        return i2c_master_recv(wm8350->i2c_client, dest, bytes);
+        ret = i2c_master_recv(wm8350->i2c_client, dest, bytes);
+        if (ret < 0)
+                return ret;
+        if (ret != bytes)
+                return -EIO;
+        return 0;
 }
 
 static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg,
@@ -38,13 +43,19 @@ static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg,
 {
         /* we add 1 byte for device register */
         u8 msg[(WM8350_MAX_REGISTER << 1) + 1];
+        int ret;
 
         if (bytes > ((WM8350_MAX_REGISTER << 1) + 1))
                 return -EINVAL;
 
         msg[0] = reg;
         memcpy(&msg[1], src, bytes);
-        return i2c_master_send(wm8350->i2c_client, msg, bytes + 1);
+        ret = i2c_master_send(wm8350->i2c_client, msg, bytes + 1);
+        if (ret < 0)
+                return ret;
+        if (ret != bytes + 1)
+                return -EIO;
+        return 0;
 }
 
 static int wm8350_i2c_probe(struct i2c_client *i2c,
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 9494400e8fd0..fee7304102af 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -227,10 +227,20 @@ config HP_WMI
          To compile this driver as a module, choose M here: the module will
          be called hp-wmi.
 
+config ICS932S401
+        tristate "Integrated Circuits ICS932S401"
+        depends on I2C && EXPERIMENTAL
+        help
+          If you say yes here you get support for the Integrated Circuits
+          ICS932S401 clock control chips.
+
+          This driver can also be built as a module. If so, the module
+          will be called ics932s401.
+
 config MSI_LAPTOP
         tristate "MSI Laptop Extras"
         depends on X86
-        depends on ACPI_EC
+        depends on ACPI
         depends on BACKLIGHT_CLASS_DEVICE
         ---help---
           This is a driver for laptops built by MSI (MICRO-STAR
@@ -260,7 +270,7 @@ config PANASONIC_LAPTOP
 config COMPAL_LAPTOP
         tristate "Compal Laptop Extras"
         depends on X86
-        depends on ACPI_EC
+        depends on ACPI
         depends on BACKLIGHT_CLASS_DEVICE
         ---help---
           This is a driver for laptops built by Compal:
@@ -488,4 +498,6 @@ config SGI_GRU_DEBUG
         This option enables addition debugging code for the SGI GRU driver. If
         you are unsure, say N.
 
+source "drivers/misc/c2port/Kconfig"
+
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 909e2468cdc9..817f7f5ab3bd 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
 obj-$(CONFIG_ATMEL_SSC)         += atmel-ssc.o
 obj-$(CONFIG_ATMEL_TCLIB)       += atmel_tclib.o
 obj-$(CONFIG_HP_WMI)            += hp-wmi.o
+obj-$(CONFIG_ICS932S401)        += ics932s401.o
 obj-$(CONFIG_TC1100_WMI)        += tc1100-wmi.o
 obj-$(CONFIG_LKDTM)             += lkdtm.o
 obj-$(CONFIG_TIFM_CORE)         += tifm_core.o
@@ -31,3 +32,4 @@ obj-$(CONFIG_KGDB_TESTS)	+= kgdbts.o
 obj-$(CONFIG_SGI_XP)            += sgi-xp/
 obj-$(CONFIG_SGI_GRU)           += sgi-gru/
 obj-$(CONFIG_HP_ILO)            += hpilo.o
+obj-$(CONFIG_C2PORT)            += c2port/
diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c
index 0532a2de2ce4..94c9f911824e 100644
--- a/drivers/misc/acer-wmi.c
+++ b/drivers/misc/acer-wmi.c
@@ -1297,6 +1297,12 @@ static int __init acer_wmi_init(void)
 
         set_quirks();
 
+        if (!acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) {
+                interface->capability &= ~ACER_CAP_BRIGHTNESS;
+                printk(ACER_INFO "Brightness must be controlled by "
+                       "generic video driver\n");
+        }
+
         if (platform_driver_register(&acer_platform_driver)) {
                 printk(ACER_ERR "Unable to register platform driver.\n");
                 goto error_platform_register;
diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c
index a9d5228724a6..8fb8b3591048 100644
--- a/drivers/misc/asus-laptop.c
+++ b/drivers/misc/asus-laptop.c
@@ -1208,9 +1208,13 @@ static int __init asus_laptop_init(void)
 
         dev = acpi_get_physical_device(hotk->device->handle);
 
-        result = asus_backlight_init(dev);
-        if (result)
-                goto fail_backlight;
+        if (!acpi_video_backlight_support()) {
+                result = asus_backlight_init(dev);
+                if (result)
+                        goto fail_backlight;
+        } else
+                printk(ASUS_INFO "Brightness ignored, must be controlled by "
+                       "ACPI video driver\n");
 
         result = asus_led_init(dev);
         if (result)
diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig
new file mode 100644
index 000000000000..e46af9a5810d
--- /dev/null
+++ b/drivers/misc/c2port/Kconfig
@@ -0,0 +1,35 @@
+#
+# C2 port devices
+#
+
+menuconfig C2PORT
+        tristate "Silicon Labs C2 port support (EXPERIMENTAL)"
+        depends on EXPERIMENTAL
+        default no
+        help
+          This option enables support for Silicon Labs C2 port used to
+          program Silicon micro controller chips (and other 8051 compatible).
+
+          If your board have no such micro controllers you don't need this
+          interface at all.
+
+          To compile this driver as a module, choose M here: the module will
+          be called c2port_core. Note that you also need a client module
+          usually called c2port-*.
+
+          If you are not sure, say N here.
+
+if C2PORT
+
+config C2PORT_DURAMAR_2150
+        tristate "C2 port support for Eurotech's Duramar 2150 (EXPERIMENTAL)"
+        depends on X86 && C2PORT
+        default no
+        help
+          This option enables C2 support for the Eurotech's Duramar 2150
+          on board micro controller.
+
+          To compile this driver as a module, choose M here: the module will
+          be called c2port-duramar2150.
+
+endif # C2PORT
diff --git a/drivers/misc/c2port/Makefile b/drivers/misc/c2port/Makefile
new file mode 100644
index 000000000000..3b2cf43d60f5
--- /dev/null
+++ b/drivers/misc/c2port/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_C2PORT)            += core.o
+
+obj-$(CONFIG_C2PORT_DURAMAR_2150)       += c2port-duramar2150.o
diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c
new file mode 100644
index 000000000000..338dcc121507
--- /dev/null
+++ b/drivers/misc/c2port/c2port-duramar2150.c
@@ -0,0 +1,158 @@
+/*
+ *  Silicon Labs C2 port Linux support for Eurotech Duramar 2150
+ *
+ *  Copyright (c) 2008 Rodolfo Giometti <giometti@linux.it>
+ *  Copyright (c) 2008 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/c2port.h>
+
+#define DATA_PORT       0x325
+#define DIR_PORT        0x326
+#define    C2D             (1 << 0)
+#define    C2CK            (1 << 1)
+
+static DEFINE_MUTEX(update_lock);
+
+/*
+ * C2 port operations
+ */
+
+static void duramar2150_c2port_access(struct c2port_device *dev, int status)
+{
+        u8 v;
+
+        mutex_lock(&update_lock);
+
+        v = inb(DIR_PORT);
+
+        /* 0 = input, 1 = output */
+        if (status)
+                outb(v | (C2D | C2CK), DIR_PORT);
+        else
+                /* When access is "off" is important that both lines are set
+                 * as inputs or hi-impedence */
+                outb(v & ~(C2D | C2CK), DIR_PORT);
+
+        mutex_unlock(&update_lock);
+}
+
+static void duramar2150_c2port_c2d_dir(struct c2port_device *dev, int dir)
+{
+        u8 v;
+
+        mutex_lock(&update_lock);
+
+        v = inb(DIR_PORT);
+
+        if (dir)
+                outb(v & ~C2D, DIR_PORT);
+        else
+                outb(v | C2D, DIR_PORT);
+
+        mutex_unlock(&update_lock);
+}
+
+static int duramar2150_c2port_c2d_get(struct c2port_device *dev)
+{
+        return inb(DATA_PORT) & C2D;
+}
+
+static void duramar2150_c2port_c2d_set(struct c2port_device *dev, int status)
+{
+        u8 v;
+
+        mutex_lock(&update_lock);
+
+        v = inb(DATA_PORT);
+
+        if (status)
+                outb(v | C2D, DATA_PORT);
+        else
+                outb(v & ~C2D, DATA_PORT);
+
+        mutex_unlock(&update_lock);
+}
+
+static void duramar2150_c2port_c2ck_set(struct c2port_device *dev, int status)
+{
+        u8 v;
+
+        mutex_lock(&update_lock);
+
+        v = inb(DATA_PORT);
+
+        if (status)
+                outb(v | C2CK, DATA_PORT);
+        else
+                outb(v & ~C2CK, DATA_PORT);
+
+        mutex_unlock(&update_lock);
+}
+
+static struct c2port_ops duramar2150_c2port_ops = {
+        .block_size     = 512,  /* bytes */
+        .blocks_num     = 30,   /* total flash size: 15360 bytes */
+
+        .access         = duramar2150_c2port_access,
+        .c2d_dir        = duramar2150_c2port_c2d_dir,
+        .c2d_get        = duramar2150_c2port_c2d_get,
+        .c2d_set        = duramar2150_c2port_c2d_set,
+        .c2ck_set       = duramar2150_c2port_c2ck_set,
+};
+
+static struct c2port_device *duramar2150_c2port_dev;
+
+/*
+ * Module stuff
+ */
+
+static int __init duramar2150_c2port_init(void)
+{
+        struct resource *res;
+        int ret = 0;
+
+        res = request_region(0x325, 2, "c2port");
+        if (!res)
+                return -EBUSY;
+
+        duramar2150_c2port_dev = c2port_device_register("uc",
+                                        &duramar2150_c2port_ops, NULL);
+        if (!duramar2150_c2port_dev) {
+                ret = -ENODEV;
+                goto free_region;
+        }
+
+        return 0;
+
+free_region:
+        release_region(0x325, 2);
+        return ret;
+}
+
+static void __exit duramar2150_c2port_exit(void)
+{
+        /* Setup the GPIOs as input by default (access = 0) */
+        duramar2150_c2port_access(duramar2150_c2port_dev, 0);
+
+        c2port_device_unregister(duramar2150_c2port_dev);
+
+        release_region(0x325, 2);
+}
+
+module_init(duramar2150_c2port_init);
+module_exit(duramar2150_c2port_exit);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("Silicon Labs C2 port Linux support for Duramar 2150");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c
new file mode 100644
index 000000000000..0207dd59090d
--- /dev/null
+++ b/drivers/misc/c2port/core.c
@@ -0,0 +1,1003 @@
+/*
+ *  Silicon Labs C2 port core Linux support
+ *
+ *  Copyright (c) 2007 Rodolfo Giometti <giometti@linux.it>
+ *  Copyright (c) 2007 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/idr.h>
+#include <linux/sched.h>
+
+#include <linux/c2port.h>
+
+#define DRIVER_NAME             "c2port"
+#define DRIVER_VERSION          "0.51.0"
+
+static DEFINE_SPINLOCK(c2port_idr_lock);
+static DEFINE_IDR(c2port_idr);
+
+/*
+ * Local variables
+ */
+
+static struct class *c2port_class;
+
+/*
+ * C2 registers & commands defines
+ */
+
+/* C2 registers */
+#define C2PORT_DEVICEID         0x00
+#define C2PORT_REVID            0x01
+#define C2PORT_FPCTL            0x02
+#define C2PORT_FPDAT            0xB4
+
+/* C2 interface commands */
+#define C2PORT_GET_VERSION      0x01
+#define C2PORT_DEVICE_ERASE     0x03
+#define C2PORT_BLOCK_READ       0x06
+#define C2PORT_BLOCK_WRITE      0x07
+#define C2PORT_PAGE_ERASE       0x08
+
+/* C2 status return codes */
+#define C2PORT_INVALID_COMMAND  0x00
+#define C2PORT_COMMAND_FAILED   0x02
+#define C2PORT_COMMAND_OK       0x0d
+
+/*
+ * C2 port low level signal managements
+ */
+
+static void c2port_reset(struct c2port_device *dev)
+{
+        struct c2port_ops *ops = dev->ops;
+
+        /* To reset the device we have to keep clock line low for at least
+         * 20us.
+         */
+        local_irq_disable();
+        ops->c2ck_set(dev, 0);
+        udelay(25);
+        ops->c2ck_set(dev, 1);
+        local_irq_enable();
+
+        udelay(1);
+}
+
+static void c2port_strobe_ck(struct c2port_device *dev)
+{
+        struct c2port_ops *ops = dev->ops;
+
+        /* During hi-low-hi transition we disable local IRQs to avoid
+         * interructions since C2 port specification says that it must be
+         * shorter than 5us, otherwise the microcontroller may consider
+         * it as a reset signal!
+         */
+        local_irq_disable();
+        ops->c2ck_set(dev, 0);
+        udelay(1);
+        ops->c2ck_set(dev, 1);
+        local_irq_enable();
+
+        udelay(1);
+}
+
+/*
+ * C2 port basic functions
+ */
+
+static void c2port_write_ar(struct c2port_device *dev, u8 addr)
+{
+        struct c2port_ops *ops = dev->ops;
+        int i;
+
+        /* START field */
+        c2port_strobe_ck(dev);
+
+        /* INS field (11b, LSB first) */
+        ops->c2d_dir(dev, 0);
+        ops->c2d_set(dev, 1);
+        c2port_strobe_ck(dev);
+        ops->c2d_set(dev, 1);
+        c2port_strobe_ck(dev);
+
+        /* ADDRESS field */
+        for (i = 0; i < 8; i++) {
+                ops->c2d_set(dev, addr & 0x01);
+                c2port_strobe_ck(dev);
+
+                addr >>= 1;
+        }
+
+        /* STOP field */
+        ops->c2d_dir(dev, 1);
+        c2port_strobe_ck(dev);
+}
+
+static int c2port_read_ar(struct c2port_device *dev, u8 *addr)
+{
+        struct c2port_ops *ops = dev->ops;
+        int i;
+
+        /* START field */
+        c2port_strobe_ck(dev);
+
+        /* INS field (10b, LSB first) */
+        ops->c2d_dir(dev, 0);
+        ops->c2d_set(dev, 0);
+        c2port_strobe_ck(dev);
+        ops->c2d_set(dev, 1);
+        c2port_strobe_ck(dev);
+
+        /* ADDRESS field */
+        ops->c2d_dir(dev, 1);
+        *addr = 0;
+        for (i = 0; i < 8; i++) {
+                *addr >>= 1;    /* shift in 8-bit ADDRESS field LSB first */
+
+                c2port_strobe_ck(dev);
+                if (ops->c2d_get(dev))
+                        *addr |= 0x80;
+        }
+
+        /* STOP field */
+        c2port_strobe_ck(dev);
+
+        return 0;
+}
+
+static int c2port_write_dr(struct c2port_device *dev, u8 data)
+{
+        struct c2port_ops *ops = dev->ops;
+        int timeout, i;
+
+        /* START field */
+        c2port_strobe_ck(dev);
+
+        /* INS field (01b, LSB first) */
+        ops->c2d_dir(dev, 0);
+        ops->c2d_set(dev, 1);
+        c2port_strobe_ck(dev);
+        ops->c2d_set(dev, 0);
+        c2port_strobe_ck(dev);
+
+        /* LENGTH field (00b, LSB first -> 1 byte) */
+        ops->c2d_set(dev, 0);
+        c2port_strobe_ck(dev);
+        ops->c2d_set(dev, 0);
+        c2port_strobe_ck(dev);
+
+        /* DATA field */
+        for (i = 0; i < 8; i++) {
+                ops->c2d_set(dev, data & 0x01);
+                c2port_strobe_ck(dev);
+
+                data >>= 1;
+        }
+
+        /* WAIT field */
+        ops->c2d_dir(dev, 1);
+        timeout = 20;
+        do {
+                c2port_strobe_ck(dev);
+                if (ops->c2d_get(dev))
+                        break;
+
+                udelay(1);
+        } while (--timeout > 0);
+        if (timeout == 0)
+                return -EIO;
+
+        /* STOP field */
+        c2port_strobe_ck(dev);
+
+        return 0;
+}
+
+static int c2port_read_dr(struct c2port_device *dev, u8 *data)
+{
+        struct c2port_ops *ops = dev->ops;
+        int timeout, i;
+
+        /* START field */
+        c2port_strobe_ck(dev);
+
+        /* INS field (00b, LSB first) */
+        ops->c2d_dir(dev, 0);
+        ops->c2d_set(dev, 0);
+        c2port_strobe_ck(dev);
+        ops->c2d_set(dev, 0);
+        c2port_strobe_ck(dev);
+
+        /* LENGTH field (00b, LSB first -> 1 byte) */
+        ops->c2d_set(dev, 0);
+        c2port_strobe_ck(dev);
+        ops->c2d_set(dev, 0);
+        c2port_strobe_ck(dev);
+
+        /* WAIT field */
+        ops->c2d_dir(dev, 1);
+        timeout = 20;
+        do {
+                c2port_strobe_ck(dev);
+                if (ops->c2d_get(dev))
+                        break;
+
+                udelay(1);
+        } while (--timeout > 0);
+        if (timeout == 0)
+                return -EIO;
+
+        /* DATA field */
+        *data = 0;
+        for (i = 0; i < 8; i++) {
+                *data >>= 1;    /* shift in 8-bit DATA field LSB first */
+
+                c2port_strobe_ck(dev);
+                if (ops->c2d_get(dev))
+                        *data |= 0x80;
+        }
+
+        /* STOP field */
+        c2port_strobe_ck(dev);
+
+        return 0;
+}
+
+static int c2port_poll_in_busy(struct c2port_device *dev)
+{
+        u8 addr;
+        int ret, timeout = 20;
+
+        do {
+                ret = (c2port_read_ar(dev, &addr));
+                if (ret < 0)
+                        return -EIO;
+
+                if (!(addr & 0x02))
+                        break;
+
+                udelay(1);
+        } while (--timeout > 0);
+        if (timeout == 0)
+                return -EIO;
+
+        return 0;
+}
+
+static int c2port_poll_out_ready(struct c2port_device *dev)
+{
+        u8 addr;
+        int ret, timeout = 10000; /* erase flash needs long time... */
+
+        do {
+                ret = (c2port_read_ar(dev, &addr));
+                if (ret < 0)
+                        return -EIO;
+
+                if (addr & 0x01)
+                        break;
+
+                udelay(1);
+        } while (--timeout > 0);
+        if (timeout == 0)
+                return -EIO;
+
+        return 0;
+}
+
+/*
+ * sysfs methods
+ */
+
+static ssize_t c2port_show_name(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct c2port_device *c2dev = dev_get_drvdata(dev);
+
+        return sprintf(buf, "%s\n", c2dev->name);
+}
+
+static ssize_t c2port_show_flash_blocks_num(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct c2port_device *c2dev = dev_get_drvdata(dev);
+        struct c2port_ops *ops = c2dev->ops;
+
+        return sprintf(buf, "%d\n", ops->blocks_num);
+}
+
+static ssize_t c2port_show_flash_block_size(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct c2port_device *c2dev = dev_get_drvdata(dev);
+        struct c2port_ops *ops = c2dev->ops;
+
+        return sprintf(buf, "%d\n", ops->block_size);
+}
+
+static ssize_t c2port_show_flash_size(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct c2port_device *c2dev = dev_get_drvdata(dev);
+        struct c2port_ops *ops = c2dev->ops;
+
+        return sprintf(buf, "%d\n", ops->blocks_num * ops->block_size);
+}
+
+static ssize_t c2port_show_access(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct c2port_device *c2dev = dev_get_drvdata(dev);
+
+        return sprintf(buf, "%d\n", c2dev->access);
+}
+
+static ssize_t c2port_store_access(struct device *dev,
+                                struct device_attribute *attr,
+                                const char *buf, size_t count)
+{
+        struct c2port_device *c2dev = dev_get_drvdata(dev);
+        struct c2port_ops *ops = c2dev->ops;
+        int status, ret;
+
+        ret = sscanf(buf, "%d", &status);
+        if (ret != 1)
+                return -EINVAL;
+
+        mutex_lock(&c2dev->mutex);
+
+        c2dev->access = !!status;
+
+        /* If access is "on" clock should be HIGH _before_ setting the line
+         * as output and data line should be set as INPUT anyway */
+        if (c2dev->access)
+                ops->c2ck_set(c2dev, 1);
+        ops->access(c2dev, c2dev->access);
+        if (c2dev->access)
+                ops->c2d_dir(c2dev, 1);
+
+        mutex_unlock(&c2dev->mutex);
+
+        return count;
+}
+
+static ssize_t c2port_store_reset(struct device *dev,
+                                struct device_attribute *attr,
+                                const char *buf, size_t count)
+{
+        struct c2port_device *c2dev = dev_get_drvdata(dev);
+
+        /* Check the device access status */
+        if (!c2dev->access)
+                return -EBUSY;
+
+        mutex_lock(&c2dev->mutex);
+
+        c2port_reset(c2dev);
+        c2dev->flash_access = 0;
+
+        mutex_unlock(&c2dev->mutex);
+
+        return count;
+}
+
+static ssize_t __c2port_show_dev_id(struct c2port_device *dev, char *buf)
+{
+        u8 data;
+        int ret;
+
+        /* Select DEVICEID register for C2 data register accesses */
+        c2port_write_ar(dev, C2PORT_DEVICEID);
+
+        /* Read and return the device ID register */
+        ret = c2port_read_dr(dev, &data);
+        if (ret < 0)
+                return ret;
+
+        return sprintf(buf, "%d\n", data);
+}
+
+static ssize_t c2port_show_dev_id(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct c2port_device *c2dev = dev_get_drvdata(dev);
+        ssize_t ret;
+
+        /* Check the device access status */
+        if (!c2dev->access)
+                return -EBUSY;
+
+        mutex_lock(&c2dev->mutex);
+        ret = __c2port_show_dev_id(c2dev, buf);
+        mutex_unlock(&c2dev->mutex);
+
+        if (ret < 0)
+                dev_err(dev, "cannot read from %s\n", c2dev->name);
+
+        return ret;
+}
+
+static ssize_t __c2port_show_rev_id(struct c2port_device *dev, char *buf)
+{
+        u8 data;
+        int ret;
+
+        /* Select REVID register for C2 data register accesses */
+        c2port_write_ar(dev, C2PORT_REVID);
+
+        /* Read and return the revision ID register */
+        ret = c2port_read_dr(dev, &data);
+        if (ret < 0)
+                return ret;
+
+        return sprintf(buf, "%d\n", data);
+}
+
+static ssize_t c2port_show_rev_id(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct c2port_device *c2dev = dev_get_drvdata(dev);
+        ssize_t ret;
+
+        /* Check the device access status */
+        if (!c2dev->access)
+                return -EBUSY;
+
+        mutex_lock(&c2dev->mutex);
+        ret = __c2port_show_rev_id(c2dev, buf);
+        mutex_unlock(&c2dev->mutex);
+
+        if (ret < 0)
+                dev_err(c2dev->dev, "cannot read from %s\n", c2dev->name);
+
+        return ret;
+}
+
+static ssize_t c2port_show_flash_access(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct c2port_device *c2dev = dev_get_drvdata(dev);
+
+        return sprintf(buf, "%d\n", c2dev->flash_access);
+}
+
+static ssize_t __c2port_store_flash_access(struct c2port_device *dev,
+                                                int status)
+{
+        int ret;
+
+        /* Check the device access status */
+        if (!dev->access)
+                return -EBUSY;
+
+        dev->flash_access = !!status;
+
+        /* If flash_access is off we have nothing to do... */
+        if (dev->flash_access == 0)
+                return 0;
+
+        /* Target the C2 flash programming control register for C2 data
+         * register access */
+        c2port_write_ar(dev, C2PORT_FPCTL);
+
+        /* Write the first keycode to enable C2 Flash programming */
+        ret = c2port_write_dr(dev, 0x02);
+        if (ret < 0)
+                return ret;
+
+        /* Write the second keycode to enable C2 Flash programming */
+        ret = c2port_write_dr(dev, 0x01);
+        if (ret < 0)
+                return ret;
+
+        /* Delay for at least 20ms to ensure the target is ready for
+         * C2 flash programming */
+        mdelay(25);
+
+        return 0;
+}
+
+static ssize_t c2port_store_flash_access(struct device *dev,
+                                struct device_attribute *attr,
+                                const char *buf, size_t count)
+{
+        struct c2port_device *c2dev = dev_get_drvdata(dev);
+        int status;
+        ssize_t ret;
+
+        ret = sscanf(buf, "%d", &status);
+        if (ret != 1)
+                return -EINVAL;
+
+        mutex_lock(&c2dev->mutex);
+        ret = __c2port_store_flash_access(c2dev, status);
+        mutex_unlock(&c2dev->mutex);
+
+        if (ret < 0) {
+                dev_err(c2dev->dev, "cannot enable %s flash programming\n",
+                        c2dev->name);
+                return ret;
+        }
+
+        return count;
+}
+
+static ssize_t __c2port_write_flash_erase(struct c2port_device *dev)
+{
+        u8 status;
+        int ret;
+
+        /* Target the C2 flash programming data register for C2 data register
+         * access.
+         */
+        c2port_write_ar(dev, C2PORT_FPDAT);
+
+        /* Send device erase command */
+        c2port_write_dr(dev, C2PORT_DEVICE_ERASE);
+
+        /* Wait for input acknowledge */
+        ret = c2port_poll_in_busy(dev);
+        if (ret < 0)
+                return ret;
+
+        /* Should check status before starting FLASH access sequence */
+
+        /* Wait for status information */
+        ret = c2port_poll_out_ready(dev);
+        if (ret < 0)
+                return ret;
+
+        /* Read flash programming interface status */
+        ret = c2port_read_dr(dev, &status);
+        if (ret < 0)
+                return ret;
+        if (status != C2PORT_COMMAND_OK)
+                return -EBUSY;
+
+        /* Send a three-byte arming sequence to enable the device erase.
+         * If the sequence is not received correctly, the command will be
+         * ignored.
+         * Sequence is: 0xde, 0xad, 0xa5.
+         */
+        c2port_write_dr(dev, 0xde);
+        ret = c2port_poll_in_busy(dev);
+        if (ret < 0)
+                return ret;
+        c2port_write_dr(dev, 0xad);
+        ret = c2port_poll_in_busy(dev);
+        if (ret < 0)
+                return ret;
+        c2port_write_dr(dev, 0xa5);
+        ret = c2port_poll_in_busy(dev);
+        if (ret < 0)
+                return ret;
+
+        ret = c2port_poll_out_ready(dev);
+        if (ret < 0)
+                return ret;
+
+        return 0;
+}
+
+static ssize_t c2port_store_flash_erase(struct device *dev,
+                                struct device_attribute *attr,
+                                const char *buf, size_t count)
+{
+        struct c2port_device *c2dev = dev_get_drvdata(dev);
+        int ret;
+
+        /* Check the device and flash access status */
+        if (!c2dev->access || !c2dev->flash_access)
+                return -EBUSY;
+
+        mutex_lock(&c2dev->mutex);
+        ret = __c2port_write_flash_erase(c2dev);
+        mutex_unlock(&c2dev->mutex);
+
+        if (ret < 0) {
+                dev_err(c2dev->dev, "cannot erase %s flash\n", c2dev->name);
+                return ret;
+        }
+
+        return count;
+}
+
+static ssize_t __c2port_read_flash_data(struct c2port_device *dev,
+                                char *buffer, loff_t offset, size_t count)
+{
+        struct c2port_ops *ops = dev->ops;
+        u8 status, nread = 128;
+        int i, ret;
+
+        /* Check for flash end */
+        if (offset >= ops->block_size * ops->blocks_num)
+                return 0;
+
+        if (ops->block_size * ops->blocks_num - offset < nread)
+                nread = ops->block_size * ops->blocks_num - offset;
+        if (count < nread)
+                nread = count;
+        if (nread == 0)
+                return nread;
+
+        /* Target the C2 flash programming data register for C2 data register
+         * access */
+        c2port_write_ar(dev, C2PORT_FPDAT);
+
+        /* Send flash block read command */
+        c2port_write_dr(dev, C2PORT_BLOCK_READ);
+
+        /* Wait for input acknowledge */
+        ret = c2port_poll_in_busy(dev);
+        if (ret < 0)
+                return ret;
+
+        /* Should check status before starting FLASH access sequence */
+
+        /* Wait for status information */
+        ret = c2port_poll_out_ready(dev);
+        if (ret < 0)
+                return ret;
+
+        /* Read flash programming interface status */
+        ret = c2port_read_dr(dev, &status);
+        if (ret < 0)
+                return ret;
+        if (status != C2PORT_COMMAND_OK)
+                return -EBUSY;
+
+        /* Send address high byte */
+        c2port_write_dr(dev, offset >> 8);
+        ret = c2port_poll_in_busy(dev);
+        if (ret < 0)
+                return ret;
+
+        /* Send address low byte */
+        c2port_write_dr(dev, offset & 0x00ff);
+        ret = c2port_poll_in_busy(dev);
+        if (ret < 0)
+                return ret;
+
+        /* Send address block size */
+        c2port_write_dr(dev, nread);
+        ret = c2port_poll_in_busy(dev);
+        if (ret < 0)
+                return ret;
+
+        /* Should check status before reading FLASH block */
+
+        /* Wait for status information */
+        ret = c2port_poll_out_ready(dev);
+        if (ret < 0)
+                return ret;
+
+        /* Read flash programming interface status */
+        ret = c2port_read_dr(dev, &status);
+        if (ret < 0)
+                return ret;
+        if (status != C2PORT_COMMAND_OK)
+                return -EBUSY;
+
+        /* Read flash block */
+        for (i = 0; i < nread; i++) {
+                ret = c2port_poll_out_ready(dev);
+                if (ret < 0)
+                        return ret;
+
+                ret = c2port_read_dr(dev, buffer+i);
+                if (ret < 0)
+                        return ret;
+        }
+
+        return nread;
+}
+
+static ssize_t c2port_read_flash_data(struct kobject *kobj,
+                                struct bin_attribute *attr,
+                                char *buffer, loff_t offset, size_t count)
+{
+        struct c2port_device *c2dev =
+                        dev_get_drvdata(container_of(kobj,
+                                                struct device, kobj));
+        ssize_t ret;
+
+        /* Check the device and flash access status */
+        if (!c2dev->access || !c2dev->flash_access)
+                return -EBUSY;
+
+        mutex_lock(&c2dev->mutex);
+        ret = __c2port_read_flash_data(c2dev, buffer, offset, count);
+        mutex_unlock(&c2dev->mutex);
+
+        if (ret < 0)
+                dev_err(c2dev->dev, "cannot read %s flash\n", c2dev->name);
+
+        return ret;
+}
+
+static ssize_t __c2port_write_flash_data(struct c2port_device *dev,
+                                char *buffer, loff_t offset, size_t count)
+{
+        struct c2port_ops *ops = dev->ops;
+        u8 status, nwrite = 128;
+        int i, ret;
+
+        if (nwrite > count)
+                nwrite = count;
+        if (ops->block_size * ops->blocks_num - offset < nwrite)
+                nwrite = ops->block_size * ops->blocks_num - offset;
+
+        /* Check for flash end */
+        if (offset >= ops->block_size * ops->blocks_num)
+                return -EINVAL;
+
+        /* Target the C2 flash programming data register for C2 data register
+         * access */
+        c2port_write_ar(dev, C2PORT_FPDAT);
+
+        /* Send flash block write command */
+        c2port_write_dr(dev, C2PORT_BLOCK_WRITE);
+
+        /* Wait for input acknowledge */
+        ret = c2port_poll_in_busy(dev);
+        if (ret < 0)
+                return ret;
+
+        /* Should check status before starting FLASH access sequence */
+
+        /* Wait for status information */
+        ret = c2port_poll_out_ready(dev);
+        if (ret < 0)
+                return ret;
+
+        /* Read flash programming interface status */
+        ret = c2port_read_dr(dev, &status);
+        if (ret < 0)
+                return ret;
+        if (status != C2PORT_COMMAND_OK)
+                return -EBUSY;
+
+        /* Send address high byte */
+        c2port_write_dr(dev, offset >> 8);
+        ret = c2port_poll_in_busy(dev);
+        if (ret < 0)
+                return ret;
+
+        /* Send address low byte */
+        c2port_write_dr(dev, offset & 0x00ff);
+        ret = c2port_poll_in_busy(dev);
+        if (ret < 0)
+                return ret;
+
+        /* Send address block size */
+        c2port_write_dr(dev, nwrite);
+        ret = c2port_poll_in_busy(dev);
+        if (ret < 0)
+                return ret;
+
+        /* Should check status before writing FLASH block */
+
+        /* Wait for status information */
+        ret = c2port_poll_out_ready(dev);
+        if (ret < 0)
+                return ret;
+
+        /* Read flash programming interface status */
+        ret = c2port_read_dr(dev, &status);
+        if (ret < 0)
+                return ret;
+        if (status != C2PORT_COMMAND_OK)
+                return -EBUSY;
+
+        /* Write flash block */
+        for (i = 0; i < nwrite; i++) {
+                ret = c2port_write_dr(dev, *(buffer+i));
+                if (ret < 0)
+                        return ret;
+
+                ret = c2port_poll_in_busy(dev);
+                if (ret < 0)
+                        return ret;
+
+        }
+
+        /* Wait for last flash write to complete */
+        ret = c2port_poll_out_ready(dev);
+        if (ret < 0)
+                return ret;
+
+        return nwrite;
+}
+
+static ssize_t c2port_write_flash_data(struct kobject *kobj,
+                                struct bin_attribute *attr,
+                                char *buffer, loff_t offset, size_t count)
+{
+        struct c2port_device *c2dev =
+                        dev_get_drvdata(container_of(kobj,
+                                                struct device, kobj));
+        int ret;
+
+        /* Check the device access status */
+        if (!c2dev->access || !c2dev->flash_access)
+                return -EBUSY;
+
+        mutex_lock(&c2dev->mutex);
+        ret = __c2port_write_flash_data(c2dev, buffer, offset, count);
+        mutex_unlock(&c2dev->mutex);
+
+        if (ret < 0)
+                dev_err(c2dev->dev, "cannot write %s flash\n", c2dev->name);
+
+        return ret;
+}
+
+/*
+ * Class attributes
+ */
+
+static struct device_attribute c2port_attrs[] = {
+        __ATTR(name, 0444, c2port_show_name, NULL),
+        __ATTR(flash_blocks_num, 0444, c2port_show_flash_blocks_num, NULL),
+        __ATTR(flash_block_size, 0444, c2port_show_flash_block_size, NULL),
+        __ATTR(flash_size, 0444, c2port_show_flash_size, NULL),
+        __ATTR(access, 0644, c2port_show_access, c2port_store_access),
+        __ATTR(reset, 0200, NULL, c2port_store_reset),
+        __ATTR(dev_id, 0444, c2port_show_dev_id, NULL),
+        __ATTR(rev_id, 0444, c2port_show_rev_id, NULL),
+
+        __ATTR(flash_access, 0644, c2port_show_flash_access,
+                                        c2port_store_flash_access),
+        __ATTR(flash_erase, 0200, NULL, c2port_store_flash_erase),
+        __ATTR_NULL,
+};
+
+static struct bin_attribute c2port_bin_attrs = {
+        .attr   = {
+                .name   = "flash_data",
+                .mode   = 0644
+        },
+        .read   = c2port_read_flash_data,
+        .write  = c2port_write_flash_data,
+        /* .size is computed at run-time */
+};
+
+/*
+ * Exported functions
+ */
+
+struct c2port_device *c2port_device_register(char *name,
+                                        struct c2port_ops *ops, void *devdata)
+{
+        struct c2port_device *c2dev;
+        int id, ret;
+
+        if (unlikely(!ops) || unlikely(!ops->access) || \
+                unlikely(!ops->c2d_dir) || unlikely(!ops->c2ck_set) || \
+                unlikely(!ops->c2d_get) || unlikely(!ops->c2d_set))
+                return ERR_PTR(-EINVAL);
+
+        c2dev = kmalloc(sizeof(struct c2port_device), GFP_KERNEL);
+        if (unlikely(!c2dev))
+                return ERR_PTR(-ENOMEM);
+
+        ret = idr_pre_get(&c2port_idr, GFP_KERNEL);
+        if (!ret) {
+                ret = -ENOMEM;
+                goto error_idr_get_new;
+        }
+
+        spin_lock_irq(&c2port_idr_lock);
+        ret = idr_get_new(&c2port_idr, c2dev, &id);
+        spin_unlock_irq(&c2port_idr_lock);
+
+        if (ret < 0)
+                goto error_idr_get_new;
+        c2dev->id = id;
+
+        c2dev->dev = device_create(c2port_class, NULL, 0, c2dev,
+                                        "c2port%d", id);
+        if (unlikely(!c2dev->dev)) {
+                ret = -ENOMEM;
+                goto error_device_create;
+        }
+        dev_set_drvdata(c2dev->dev, c2dev);
+
+        strncpy(c2dev->name, name, C2PORT_NAME_LEN);
+        c2dev->ops = ops;
+        mutex_init(&c2dev->mutex);
+
+        /* Create binary file */
+        c2port_bin_attrs.size = ops->blocks_num * ops->block_size;
+        ret = device_create_bin_file(c2dev->dev, &c2port_bin_attrs);
+        if (unlikely(ret))
+                goto error_device_create_bin_file;
+
+        /* By default C2 port access is off */
+        c2dev->access = c2dev->flash_access = 0;
+        ops->access(c2dev, 0);
+
+        dev_info(c2dev->dev, "C2 port %s added\n", name);
+        dev_info(c2dev->dev, "%s flash has %d blocks x %d bytes "
+                                "(%d bytes total)\n",
+                                name, ops->blocks_num, ops->block_size,
+                                ops->blocks_num * ops->block_size);
+
+        return c2dev;
+
+error_device_create_bin_file:
+        device_destroy(c2port_class, 0);
+
+error_device_create:
+        spin_lock_irq(&c2port_idr_lock);
+        idr_remove(&c2port_idr, id);
+        spin_unlock_irq(&c2port_idr_lock);
+
+error_idr_get_new:
+        kfree(c2dev);
+
+        return ERR_PTR(ret);
+}
+EXPORT_SYMBOL(c2port_device_register);
+
+void c2port_device_unregister(struct c2port_device *c2dev)
+{
+        if (!c2dev)
+                return;
+
+        dev_info(c2dev->dev, "C2 port %s removed\n", c2dev->name);
+
+        device_remove_bin_file(c2dev->dev, &c2port_bin_attrs);
+        spin_lock_irq(&c2port_idr_lock);
+        idr_remove(&c2port_idr, c2dev->id);
+        spin_unlock_irq(&c2port_idr_lock);
+
+        device_destroy(c2port_class, c2dev->id);
+
+        kfree(c2dev);
+}
+EXPORT_SYMBOL(c2port_device_unregister);
+
+/*
+ * Module stuff
+ */
+
+static int __init c2port_init(void)
+{
+        printk(KERN_INFO "Silicon Labs C2 port support v. " DRIVER_VERSION
+                " - (C) 2007 Rodolfo Giometti\n");
+
+        c2port_class = class_create(THIS_MODULE, "c2port");
+        if (!c2port_class) {
+                printk(KERN_ERR "c2port: failed to allocate class\n");
+                return -ENOMEM;
+        }
+        c2port_class->dev_attrs = c2port_attrs;
+
+        return 0;
+}
+
+static void __exit c2port_exit(void)
+{
+        class_destroy(c2port_class);
+}
+
+module_init(c2port_init);
+module_exit(c2port_exit);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("Silicon Labs C2 port support v. " DRIVER_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/compal-laptop.c b/drivers/misc/compal-laptop.c
index 344b790a6253..11003bba10d3 100644
--- a/drivers/misc/compal-laptop.c
+++ b/drivers/misc/compal-laptop.c
@@ -326,12 +326,14 @@ static int __init compal_init(void)
 
         /* Register backlight stuff */
 
-        compalbl_device = backlight_device_register("compal-laptop", NULL, NULL,
-                                                &compalbl_ops);
-        if (IS_ERR(compalbl_device))
-                return PTR_ERR(compalbl_device);
+        if (!acpi_video_backlight_support()) {
+                compalbl_device = backlight_device_register("compal-laptop", NULL, NULL,
+                                                            &compalbl_ops);
+                if (IS_ERR(compalbl_device))
+                        return PTR_ERR(compalbl_device);
 
-        compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1;
+                compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1;
+        }
 
         ret = platform_driver_register(&compal_driver);
         if (ret)
diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c
index 9ef98b2d5039..02fe2b8b8939 100644
--- a/drivers/misc/eeepc-laptop.c
+++ b/drivers/misc/eeepc-laptop.c
@@ -825,9 +825,15 @@ static int __init eeepc_laptop_init(void)
                 return -ENODEV;
         }
         dev = acpi_get_physical_device(ehotk->device->handle);
-        result = eeepc_backlight_init(dev);
-        if (result)
-                goto fail_backlight;
+
+        if (!acpi_video_backlight_support()) {
+                result = eeepc_backlight_init(dev);
+                if (result)
+                        goto fail_backlight;
+        } else
+                printk(EEEPC_INFO "Backlight controlled by ACPI video "
+                       "driver\n");
+
         result = eeepc_hwmon_init(dev);
         if (result)
                 goto fail_hwmon;
diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c
index d2cf0bfe3163..a7dd3e9fb79d 100644
--- a/drivers/misc/fujitsu-laptop.c
+++ b/drivers/misc/fujitsu-laptop.c
@@ -464,6 +464,14 @@ static int dmi_check_cb_s6410(const struct dmi_system_id *id)
         return 0;
 }
 
+static int dmi_check_cb_s6420(const struct dmi_system_id *id)
+{
+        dmi_check_cb_common(id);
+        fujitsu->keycode1 = KEY_SCREENLOCK;     /* "Lock" */
+        fujitsu->keycode2 = KEY_HELP;   /* "Mobility Center" */
+        return 0;
+}
+
 static int dmi_check_cb_p8010(const struct dmi_system_id *id)
 {
         dmi_check_cb_common(id);
@@ -473,7 +481,7 @@ static int dmi_check_cb_p8010(const struct dmi_system_id *id)
         return 0;
 }
 
-static struct dmi_system_id __initdata fujitsu_dmi_table[] = {
+static struct dmi_system_id fujitsu_dmi_table[] = {
         {
          .ident = "Fujitsu Siemens S6410",
          .matches = {
@@ -482,6 +490,13 @@ static struct dmi_system_id __initdata fujitsu_dmi_table[] = {
                      },
          .callback = dmi_check_cb_s6410},
         {
+         .ident = "Fujitsu Siemens S6420",
+         .matches = {
+                     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+                     DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"),
+                     },
+         .callback = dmi_check_cb_s6420},
+        {
          .ident = "Fujitsu LifeBook P8010",
          .matches = {
                      DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
@@ -990,16 +1005,16 @@ static int __init fujitsu_init(void)
 
         /* Register backlight stuff */
 
-        fujitsu->bl_device =
-            backlight_device_register("fujitsu-laptop", NULL, NULL,
-                                      &fujitsubl_ops);
-        if (IS_ERR(fujitsu->bl_device))
-                return PTR_ERR(fujitsu->bl_device);
-
-        max_brightness = fujitsu->max_brightness;
-
-        fujitsu->bl_device->props.max_brightness = max_brightness - 1;
-        fujitsu->bl_device->props.brightness = fujitsu->brightness_level;
+        if (!acpi_video_backlight_support()) {
+                fujitsu->bl_device =
+                        backlight_device_register("fujitsu-laptop", NULL, NULL,
+                                                  &fujitsubl_ops);
+                if (IS_ERR(fujitsu->bl_device))
+                        return PTR_ERR(fujitsu->bl_device);
+                max_brightness = fujitsu->max_brightness;
+                fujitsu->bl_device->props.max_brightness = max_brightness - 1;
+                fujitsu->bl_device->props.brightness = fujitsu->brightness_level;
+        }
 
         ret = platform_driver_register(&fujitsupf_driver);
         if (ret)
@@ -1035,7 +1050,8 @@ fail_hotkey:
 
 fail_backlight:
 
-        backlight_device_unregister(fujitsu->bl_device);
+        if (fujitsu->bl_device)
+                backlight_device_unregister(fujitsu->bl_device);
 
 fail_platform_device2:
 
@@ -1062,7 +1078,8 @@ static void __exit fujitsu_cleanup(void)
                            &fujitsupf_attribute_group);
         platform_device_unregister(fujitsu->pf_device);
         platform_driver_unregister(&fujitsupf_driver);
-        backlight_device_unregister(fujitsu->bl_device);
+        if (fujitsu->bl_device)
+                backlight_device_unregister(fujitsu->bl_device);
 
         acpi_bus_unregister_driver(&acpi_fujitsu_driver);
 
diff --git a/drivers/misc/ics932s401.c b/drivers/misc/ics932s401.c
new file mode 100644
index 000000000000..6e43ab4231ae
--- /dev/null
+++ b/drivers/misc/ics932s401.c
@@ -0,0 +1,515 @@
+/*
+ * A driver for the Integrated Circuits ICS932S401
+ * Copyright (C) 2008 IBM
+ *
+ * Author: Darrick J. Wong <djwong@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/log2.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(ics932s401);
+
+/* ICS932S401 registers */
+#define ICS932S401_REG_CFG2                     0x01
+#define         ICS932S401_CFG1_SPREAD          0x01
+#define ICS932S401_REG_CFG7                     0x06
+#define         ICS932S401_FS_MASK              0x07
+#define ICS932S401_REG_VENDOR_REV               0x07
+#define         ICS932S401_VENDOR               1
+#define         ICS932S401_VENDOR_MASK          0x0F
+#define         ICS932S401_REV                  4
+#define         ICS932S401_REV_SHIFT            4
+#define ICS932S401_REG_DEVICE                   0x09
+#define         ICS932S401_DEVICE               11
+#define ICS932S401_REG_CTRL                     0x0A
+#define         ICS932S401_MN_ENABLED           0x80
+#define         ICS932S401_CPU_ALT              0x04
+#define         ICS932S401_SRC_ALT              0x08
+#define ICS932S401_REG_CPU_M_CTRL               0x0B
+#define         ICS932S401_M_MASK               0x3F
+#define ICS932S401_REG_CPU_N_CTRL               0x0C
+#define ICS932S401_REG_CPU_SPREAD1              0x0D
+#define ICS932S401_REG_CPU_SPREAD2              0x0E
+#define         ICS932S401_SPREAD_MASK          0x7FFF
+#define ICS932S401_REG_SRC_M_CTRL               0x0F
+#define ICS932S401_REG_SRC_N_CTRL               0x10
+#define ICS932S401_REG_SRC_SPREAD1              0x11
+#define ICS932S401_REG_SRC_SPREAD2              0x12
+#define ICS932S401_REG_CPU_DIVISOR              0x13
+#define         ICS932S401_CPU_DIVISOR_SHIFT    4
+#define ICS932S401_REG_PCISRC_DIVISOR           0x14
+#define         ICS932S401_SRC_DIVISOR_MASK     0x0F
+#define         ICS932S401_PCI_DIVISOR_SHIFT    4
+
+/* Base clock is 14.318MHz */
+#define BASE_CLOCK                              14318
+
+#define NUM_REGS                                21
+#define NUM_MIRRORED_REGS                       15
+
+static int regs_to_copy[NUM_MIRRORED_REGS] = {
+        ICS932S401_REG_CFG2,
+        ICS932S401_REG_CFG7,
+        ICS932S401_REG_VENDOR_REV,
+        ICS932S401_REG_DEVICE,
+        ICS932S401_REG_CTRL,
+        ICS932S401_REG_CPU_M_CTRL,
+        ICS932S401_REG_CPU_N_CTRL,
+        ICS932S401_REG_CPU_SPREAD1,
+        ICS932S401_REG_CPU_SPREAD2,
+        ICS932S401_REG_SRC_M_CTRL,
+        ICS932S401_REG_SRC_N_CTRL,
+        ICS932S401_REG_SRC_SPREAD1,
+        ICS932S401_REG_SRC_SPREAD2,
+        ICS932S401_REG_CPU_DIVISOR,
+        ICS932S401_REG_PCISRC_DIVISOR,
+};
+
+/* How often do we reread sensors values? (In jiffies) */
+#define SENSOR_REFRESH_INTERVAL (2 * HZ)
+
+/* How often do we reread sensor limit values? (In jiffies) */
+#define LIMIT_REFRESH_INTERVAL  (60 * HZ)
+
+struct ics932s401_data {
+        struct attribute_group  attrs;
+        struct mutex            lock;
+        char                    sensors_valid;
+        unsigned long           sensors_last_updated;   /* In jiffies */
+
+        u8                      regs[NUM_REGS];
+};
+
+static int ics932s401_probe(struct i2c_client *client,
+                         const struct i2c_device_id *id);
+static int ics932s401_detect(struct i2c_client *client, int kind,
+                          struct i2c_board_info *info);
+static int ics932s401_remove(struct i2c_client *client);
+
+static const struct i2c_device_id ics932s401_id[] = {
+        { "ics932s401", ics932s401 },
+        { }
+};
+MODULE_DEVICE_TABLE(i2c, ics932s401_id);
+
+static struct i2c_driver ics932s401_driver = {
+        .class          = I2C_CLASS_HWMON,
+        .driver = {
+                .name   = "ics932s401",
+        },
+        .probe          = ics932s401_probe,
+        .remove         = ics932s401_remove,
+        .id_table       = ics932s401_id,
+        .detect         = ics932s401_detect,
+        .address_data   = &addr_data,
+};
+
+static struct ics932s401_data *ics932s401_update_device(struct device *dev)
+{
+        struct i2c_client *client = to_i2c_client(dev);
+        struct ics932s401_data *data = i2c_get_clientdata(client);
+        unsigned long local_jiffies = jiffies;
+        int i, temp;
+
+        mutex_lock(&data->lock);
+        if (time_before(local_jiffies, data->sensors_last_updated +
+                SENSOR_REFRESH_INTERVAL)
+                && data->sensors_valid)
+                goto out;
+
+        /*
+         * Each register must be read as a word and then right shifted 8 bits.
+         * Not really sure why this is; setting the "byte count programming"
+         * register to 1 does not fix this problem.
+         */
+        for (i = 0; i < NUM_MIRRORED_REGS; i++) {
+                temp = i2c_smbus_read_word_data(client, regs_to_copy[i]);
+                data->regs[regs_to_copy[i]] = temp >> 8;
+        }
+
+        data->sensors_last_updated = local_jiffies;
+        data->sensors_valid = 1;
+
+out:
+        mutex_unlock(&data->lock);
+        return data;
+}
+
+static ssize_t show_spread_enabled(struct device *dev,
+                                   struct device_attribute *devattr,
+                                   char *buf)
+{
+        struct ics932s401_data *data = ics932s401_update_device(dev);
+
+        if (data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD)
+                return sprintf(buf, "1\n");
+
+        return sprintf(buf, "0\n");
+}
+
+/* bit to cpu khz map */
+static const int fs_speeds[] = {
+        266666,
+        133333,
+        200000,
+        166666,
+        333333,
+        100000,
+        400000,
+        0,
+};
+
+/* clock divisor map */
+static const int divisors[] = {2, 3, 5, 15, 4, 6, 10, 30, 8, 12, 20, 60, 16,
+                               24, 40, 120};
+
+/* Calculate CPU frequency from the M/N registers. */
+static int calculate_cpu_freq(struct ics932s401_data *data)
+{
+        int m, n, freq;
+
+        m = data->regs[ICS932S401_REG_CPU_M_CTRL] & ICS932S401_M_MASK;
+        n = data->regs[ICS932S401_REG_CPU_N_CTRL];
+
+        /* Pull in bits 8 & 9 from the M register */
+        n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x80) << 1;
+        n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x40) << 3;
+
+        freq = BASE_CLOCK * (n + 8) / (m + 2);
+        freq /= divisors[data->regs[ICS932S401_REG_CPU_DIVISOR] >>
+                         ICS932S401_CPU_DIVISOR_SHIFT];
+
+        return freq;
+}
+
+static ssize_t show_cpu_clock(struct device *dev,
+                              struct device_attribute *devattr,
+                              char *buf)
+{
+        struct ics932s401_data *data = ics932s401_update_device(dev);
+
+        return sprintf(buf, "%d\n", calculate_cpu_freq(data));
+}
+
+static ssize_t show_cpu_clock_sel(struct device *dev,
+                                  struct device_attribute *devattr,
+                                  char *buf)
+{
+        struct ics932s401_data *data = ics932s401_update_device(dev);
+        int freq;
+
+        if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED)
+                freq = calculate_cpu_freq(data);
+        else {
+                /* Freq is neatly wrapped up for us */
+                int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK;
+                freq = fs_speeds[fid];
+                if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) {
+                        switch (freq) {
+                        case 166666:
+                                freq = 160000;
+                                break;
+                        case 333333:
+                                freq = 320000;
+                                break;
+                        }
+                }
+        }
+
+        return sprintf(buf, "%d\n", freq);
+}
+
+/* Calculate SRC frequency from the M/N registers. */
+static int calculate_src_freq(struct ics932s401_data *data)
+{
+        int m, n, freq;
+
+        m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK;
+        n = data->regs[ICS932S401_REG_SRC_N_CTRL];
+
+        /* Pull in bits 8 & 9 from the M register */
+        n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1;
+        n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3;
+
+        freq = BASE_CLOCK * (n + 8) / (m + 2);
+        freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] &
+                         ICS932S401_SRC_DIVISOR_MASK];
+
+        return freq;
+}
+
+static ssize_t show_src_clock(struct device *dev,
+                              struct device_attribute *devattr,
+                              char *buf)
+{
+        struct ics932s401_data *data = ics932s401_update_device(dev);
+
+        return sprintf(buf, "%d\n", calculate_src_freq(data));
+}
+
+static ssize_t show_src_clock_sel(struct device *dev,
+                                  struct device_attribute *devattr,
+                                  char *buf)
+{
+        struct ics932s401_data *data = ics932s401_update_device(dev);
+        int freq;
+
+        if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED)
+                freq = calculate_src_freq(data);
+        else
+                /* Freq is neatly wrapped up for us */
+                if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT &&
+                    data->regs[ICS932S401_REG_CTRL] & ICS932S401_SRC_ALT)
+                        freq = 96000;
+                else
+                        freq = 100000;
+
+        return sprintf(buf, "%d\n", freq);
+}
+
+/* Calculate PCI frequency from the SRC M/N registers. */
+static int calculate_pci_freq(struct ics932s401_data *data)
+{
+        int m, n, freq;
+
+        m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK;
+        n = data->regs[ICS932S401_REG_SRC_N_CTRL];
+
+        /* Pull in bits 8 & 9 from the M register */
+        n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1;
+        n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3;
+
+        freq = BASE_CLOCK * (n + 8) / (m + 2);
+        freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] >>
+                         ICS932S401_PCI_DIVISOR_SHIFT];
+
+        return freq;
+}
+
+static ssize_t show_pci_clock(struct device *dev,
+                              struct device_attribute *devattr,
+                              char *buf)
+{
+        struct ics932s401_data *data = ics932s401_update_device(dev);
+
+        return sprintf(buf, "%d\n", calculate_pci_freq(data));
+}
+
+static ssize_t show_pci_clock_sel(struct device *dev,
+                                  struct device_attribute *devattr,
+                                  char *buf)
+{
+        struct ics932s401_data *data = ics932s401_update_device(dev);
+        int freq;
+
+        if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED)
+                freq = calculate_pci_freq(data);
+        else
+                freq = 33333;
+
+        return sprintf(buf, "%d\n", freq);
+}
+
+static ssize_t show_value(struct device *dev,
+                          struct device_attribute *devattr,
+                          char *buf);
+
+static ssize_t show_spread(struct device *dev,
+                           struct device_attribute *devattr,
+                           char *buf);
+
+static DEVICE_ATTR(spread_enabled, S_IRUGO, show_spread_enabled, NULL);
+static DEVICE_ATTR(cpu_clock_selection, S_IRUGO, show_cpu_clock_sel, NULL);
+static DEVICE_ATTR(cpu_clock, S_IRUGO, show_cpu_clock, NULL);
+static DEVICE_ATTR(src_clock_selection, S_IRUGO, show_src_clock_sel, NULL);
+static DEVICE_ATTR(src_clock, S_IRUGO, show_src_clock, NULL);
+static DEVICE_ATTR(pci_clock_selection, S_IRUGO, show_pci_clock_sel, NULL);
+static DEVICE_ATTR(pci_clock, S_IRUGO, show_pci_clock, NULL);
+static DEVICE_ATTR(usb_clock, S_IRUGO, show_value, NULL);
+static DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL);
+static DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL);
+static DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL);
+
+static struct attribute *ics932s401_attr[] =
+{
+        &dev_attr_spread_enabled.attr,
+        &dev_attr_cpu_clock_selection.attr,
+        &dev_attr_cpu_clock.attr,
+        &dev_attr_src_clock_selection.attr,
+        &dev_attr_src_clock.attr,
+        &dev_attr_pci_clock_selection.attr,
+        &dev_attr_pci_clock.attr,
+        &dev_attr_usb_clock.attr,
+        &dev_attr_ref_clock.attr,
+        &dev_attr_cpu_spread.attr,
+        &dev_attr_src_spread.attr,
+        NULL
+};
+
+static ssize_t show_value(struct device *dev,
+                          struct device_attribute *devattr,
+                          char *buf)
+{
+        int x;
+
+        if (devattr == &dev_attr_usb_clock)
+                x = 48000;
+        else if (devattr == &dev_attr_ref_clock)
+                x = BASE_CLOCK;
+        else
+                BUG();
+
+        return sprintf(buf, "%d\n", x);
+}
+
+static ssize_t show_spread(struct device *dev,
+                           struct device_attribute *devattr,
+                           char *buf)
+{
+        struct ics932s401_data *data = ics932s401_update_device(dev);
+        int reg;
+        unsigned long val;
+
+        if (!(data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD))
+                return sprintf(buf, "0%%\n");
+
+        if (devattr == &dev_attr_src_spread)
+                reg = ICS932S401_REG_SRC_SPREAD1;
+        else if (devattr == &dev_attr_cpu_spread)
+                reg = ICS932S401_REG_CPU_SPREAD1;
+        else
+                BUG();
+
+        val = data->regs[reg] | (data->regs[reg + 1] << 8);
+        val &= ICS932S401_SPREAD_MASK;
+
+        /* Scale 0..2^14 to -0.5. */
+        val = 500000 * val / 16384;
+        return sprintf(buf, "-0.%lu%%\n", val);
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int ics932s401_detect(struct i2c_client *client, int kind,
+                          struct i2c_board_info *info)
+{
+        struct i2c_adapter *adapter = client->adapter;
+
+        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+                return -ENODEV;
+
+        if (kind <= 0) {
+                int vendor, device, revision;
+
+                vendor = i2c_smbus_read_word_data(client,
+                                                  ICS932S401_REG_VENDOR_REV);
+                vendor >>= 8;
+                revision = vendor >> ICS932S401_REV_SHIFT;
+                vendor &= ICS932S401_VENDOR_MASK;
+                if (vendor != ICS932S401_VENDOR)
+                        return -ENODEV;
+
+                device = i2c_smbus_read_word_data(client,
+                                                  ICS932S401_REG_DEVICE);
+                device >>= 8;
+                if (device != ICS932S401_DEVICE)
+                        return -ENODEV;
+
+                if (revision != ICS932S401_REV)
+                        dev_info(&adapter->dev, "Unknown revision %d\n",
+                                 revision);
+        } else
+                dev_dbg(&adapter->dev, "detection forced\n");
+
+        strlcpy(info->type, "ics932s401", I2C_NAME_SIZE);
+
+        return 0;
+}
+
+static int ics932s401_probe(struct i2c_client *client,
+                         const struct i2c_device_id *id)
+{
+        struct ics932s401_data *data;
+        int err;
+
+        data = kzalloc(sizeof(struct ics932s401_data), GFP_KERNEL);
+        if (!data) {
+                err = -ENOMEM;
+                goto exit;
+        }
+
+        i2c_set_clientdata(client, data);
+        mutex_init(&data->lock);
+
+        dev_info(&client->dev, "%s chip found\n", client->name);
+
+        /* Register sysfs hooks */
+        data->attrs.attrs = ics932s401_attr;
+        err = sysfs_create_group(&client->dev.kobj, &data->attrs);
+        if (err)
+                goto exit_free;
+
+        return 0;
+
+exit_free:
+        kfree(data);
+exit:
+        return err;
+}
+
+static int ics932s401_remove(struct i2c_client *client)
+{
+        struct ics932s401_data *data = i2c_get_clientdata(client);
+
+        sysfs_remove_group(&client->dev.kobj, &data->attrs);
+        kfree(data);
+        return 0;
+}
+
+static int __init ics932s401_init(void)
+{
+        return i2c_add_driver(&ics932s401_driver);
+}
+
+static void __exit ics932s401_exit(void)
+{
+        i2c_del_driver(&ics932s401_driver);
+}
+
+MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_DESCRIPTION("ICS932S401 driver");
+MODULE_LICENSE("GPL");
+
+module_init(ics932s401_init);
+module_exit(ics932s401_exit);
+
+/* IBM IntelliStation Z30 */
+MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*");
+MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*");
+
+/* IBM x3650/x3550 */
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*");
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*");
diff --git a/drivers/misc/intel_menlow.c b/drivers/misc/intel_menlow.c
index e00a2756e97e..27b7662955bb 100644
--- a/drivers/misc/intel_menlow.c
+++ b/drivers/misc/intel_menlow.c
@@ -52,6 +52,11 @@ MODULE_LICENSE("GPL");
 #define MEMORY_ARG_CUR_BANDWIDTH 1
 #define MEMORY_ARG_MAX_BANDWIDTH 0
 
+/*
+ * GTHS returning 'n' would mean that [0,n-1] states are supported
+ * In that case max_cstate would be n-1
+ * GTHS returning '0' would mean that no bandwidth control states are supported
+ */
 static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev,
                                         unsigned long *max_state)
 {
@@ -71,6 +76,9 @@ static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev,
         if (ACPI_FAILURE(status))
                 return -EFAULT;
 
+        if (!value)
+                return -EINVAL;
+
         *max_state = value - 1;
         return 0;
 }
@@ -121,7 +129,7 @@ static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev,
         if (memory_get_int_max_bandwidth(cdev, &max_state))
                 return -EFAULT;
 
-        if (max_state < 0 || state > max_state)
+        if (state > max_state)
                 return -EINVAL;
 
         arg_list.count = 1;
diff --git a/drivers/misc/msi-laptop.c b/drivers/misc/msi-laptop.c
index de898c6938f3..759763d18e4c 100644
--- a/drivers/misc/msi-laptop.c
+++ b/drivers/misc/msi-laptop.c
@@ -347,12 +347,16 @@ static int __init msi_init(void)
 
         /* Register backlight stuff */
 
-        msibl_device = backlight_device_register("msi-laptop-bl", NULL, NULL,
-                                                &msibl_ops);
-        if (IS_ERR(msibl_device))
-                return PTR_ERR(msibl_device);
-
-        msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1;
+        if (acpi_video_backlight_support()) {
+                printk(KERN_INFO "MSI: Brightness ignored, must be controlled "
+                       "by ACPI video driver\n");
+        } else {
+                msibl_device = backlight_device_register("msi-laptop-bl", NULL,
+                                                         NULL, &msibl_ops);
+                if (IS_ERR(msibl_device))
+                        return PTR_ERR(msibl_device);
+                msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1;
+        }
 
         ret = platform_driver_register(&msipf_driver);
         if (ret)
diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c
index 06f07e19dc70..7bcb81002dcf 100644
--- a/drivers/misc/sony-laptop.c
+++ b/drivers/misc/sony-laptop.c
@@ -1038,7 +1038,11 @@ static int sony_nc_add(struct acpi_device *device)
                 goto outinput;
         }
 
-        if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", &handle))) {
+        if (!acpi_video_backlight_support()) {
+                printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be "
+                       "controlled by ACPI video driver\n");
+        } else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
+                                                &handle))) {
                 sony_backlight_device = backlight_device_register("sony", NULL,
                                                                   NULL,
                                                                   &sony_backlight_ops);
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 4db1cf9078d9..7a4a26b0edd2 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -4932,16 +4932,25 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
          */
         b = tpacpi_check_std_acpi_brightness_support();
         if (b > 0) {
-                if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) {
-                        printk(TPACPI_NOTICE
-                               "Lenovo BIOS switched to ACPI backlight "
-                               "control mode\n");
-                }
-                if (brightness_enable > 1) {
-                        printk(TPACPI_NOTICE
-                               "standard ACPI backlight interface "
-                               "available, not loading native one...\n");
-                        return 1;
+
+                if (acpi_video_backlight_support()) {
+                        if (brightness_enable > 1) {
+                                printk(TPACPI_NOTICE
+                                       "Standard ACPI backlight interface "
+                                       "available, not loading native one.\n");
+                                return 1;
+                        } else if (brightness_enable == 1) {
+                                printk(TPACPI_NOTICE
+                                       "Backlight control force enabled, even if standard "
+                                       "ACPI backlight interface is available\n");
+                        }
+                } else {
+                        if (brightness_enable > 1) {
+                                printk(TPACPI_NOTICE
+                                       "Standard ACPI backlight interface not "
+                                       "available, thinkpad_acpi native "
+                                       "brightness control enabled\n");
+                        }
                 }
         }
 
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 0d9b2d6f9ebf..f210a8ee6861 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -216,8 +216,7 @@ int mmc_add_card(struct mmc_card *card)
         int ret;
         const char *type;
 
-        snprintf(card->dev.bus_id, sizeof(card->dev.bus_id),
-                 "%s:%04x", mmc_hostname(card->host), card->rca);
+        dev_set_name(&card->dev, "%s:%04x", mmc_hostname(card->host), card->rca);
 
         switch (card->type) {
         case MMC_TYPE_MMC:
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 044d84eeed7c..f7284b905eb3 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -280,7 +280,11 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
                         (card->host->ios.clock / 1000);
 
                 if (data->flags & MMC_DATA_WRITE)
-                        limit_us = 250000;
+                        /*
+                         * The limit is really 250 ms, but that is
+                         * insufficient for some crappy cards.
+                         */
+                        limit_us = 300000;
                 else
                         limit_us = 100000;
 
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 6da80fd4d974..5e945e64ead7 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -73,8 +73,7 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
         if (err)
                 goto free;
 
-        snprintf(host->class_dev.bus_id, BUS_ID_SIZE,
-                 "mmc%d", host->index);
+        dev_set_name(&host->class_dev, "mmc%d", host->index);
 
         host->parent = dev;
         host->class_dev.parent = dev;
@@ -121,7 +120,7 @@ int mmc_add_host(struct mmc_host *host)
         WARN_ON((host->caps & MMC_CAP_SDIO_IRQ) &&
                 !host->ops->enable_sdio_irq);
 
-        led_trigger_register_simple(host->class_dev.bus_id, &host->led);
+        led_trigger_register_simple(dev_name(&host->class_dev), &host->led);
 
         err = device_add(&host->class_dev);
         if (err)
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 233d0f9b3c4b..46284b527397 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -239,8 +239,7 @@ int sdio_add_func(struct sdio_func *func)
 {
         int ret;
 
-        snprintf(func->dev.bus_id, sizeof(func->dev.bus_id),
-                 "%s:%d", mmc_card_id(func->card), func->num);
+        dev_set_name(&func->dev, "%s:%d", mmc_card_id(func->card), func->num);
 
         ret = device_add(&func->dev);
         if (ret == 0)
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 07faf5412a1f..ad00e1632317 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1348,7 +1348,7 @@ static int mmc_spi_probe(struct spi_device *spi)
                 goto fail_add_host;
 
         dev_info(&spi->dev, "SD/MMC host %s%s%s%s%s\n",
-                        mmc->class_dev.bus_id,
+                        dev_name(&mmc->class_dev),
                         host->dma_dev ? "" : ", no DMA",
                         (host->pdata && host->pdata->get_ro)
                                 ? "" : ", no WP",
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 30f64b1f2354..4d010a984bed 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1733,7 +1733,7 @@ int sdhci_add_host(struct sdhci_host *host)
         mmc_add_host(mmc);
 
         printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s%s\n",
-                mmc_hostname(mmc), host->hw_name, mmc_dev(mmc)->bus_id,
+                mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
                 (host->flags & SDHCI_USE_ADMA)?"A":"",
                 (host->flags & SDHCI_USE_DMA)?"DMA":"PIO");
 
diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
index 13844843e8de..82554ddec6b3 100644
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -632,7 +632,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
         if (host->req) {
                 printk(KERN_ERR "%s : unfinished request detected\n",
-                       sock->dev.bus_id);
+                       dev_name(&sock->dev));
                 mrq->cmd->error = -ETIMEDOUT;
                 goto err_out;
         }
@@ -672,7 +672,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq)
                                             ? PCI_DMA_TODEVICE
                                             : PCI_DMA_FROMDEVICE)) {
                                 printk(KERN_ERR "%s : scatterlist map failed\n",
-                                       sock->dev.bus_id);
+                                       dev_name(&sock->dev));
                                 mrq->cmd->error = -ENOMEM;
                                 goto err_out;
                         }
@@ -684,7 +684,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq)
                                                    : PCI_DMA_FROMDEVICE);
                         if (host->sg_len < 1) {
                                 printk(KERN_ERR "%s : scatterlist map failed\n",
-                                       sock->dev.bus_id);
+                                       dev_name(&sock->dev));
                                 tifm_unmap_sg(sock, &host->bounce_buf, 1,
                                               r_data->flags & MMC_DATA_WRITE
                                               ? PCI_DMA_TODEVICE
@@ -748,7 +748,7 @@ static void tifm_sd_end_cmd(unsigned long data)
 
         if (!mrq) {
                 printk(KERN_ERR " %s : no request to complete?\n",
-                       sock->dev.bus_id);
+                       dev_name(&sock->dev));
                 spin_unlock_irqrestore(&sock->lock, flags);
                 return;
         }
@@ -789,7 +789,7 @@ static void tifm_sd_abort(unsigned long data)
         printk(KERN_ERR
                "%s : card failed to respond for a long period of time "
                "(%x, %x)\n",
-               host->dev->dev.bus_id, host->req->cmd->opcode, host->cmd_flags);
+               dev_name(&host->dev->dev), host->req->cmd->opcode, host->cmd_flags);
 
         tifm_eject(host->dev);
 }
@@ -906,7 +906,7 @@ static int tifm_sd_initialize_host(struct tifm_sd *host)
 
         if (rc) {
                 printk(KERN_ERR "%s : controller failed to reset\n",
-                       sock->dev.bus_id);
+                       dev_name(&sock->dev));
                 return -ENODEV;
         }
 
@@ -933,7 +933,7 @@ static int tifm_sd_initialize_host(struct tifm_sd *host)
         if (rc) {
                 printk(KERN_ERR
                        "%s : card not ready - probe failed on initialization\n",
-                       sock->dev.bus_id);
+                       dev_name(&sock->dev));
                 return -ENODEV;
         }
 
@@ -954,7 +954,7 @@ static int tifm_sd_probe(struct tifm_dev *sock)
         if (!(TIFM_SOCK_STATE_OCCUPIED
               & readl(sock->addr + SOCK_PRESENT_STATE))) {
                 printk(KERN_WARNING "%s : card gone, unexpectedly\n",
-                       sock->dev.bus_id);
+                       dev_name(&sock->dev));
                 return rc;
         }
 
diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c
index e5059aa3c724..8d92d8db9a98 100644
--- a/drivers/mtd/maps/cdb89712.c
+++ b/drivers/mtd/maps/cdb89712.c
@@ -14,7 +14,18 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 
-
+/* dynamic ioremap() areas */
+#define FLASH_START      0x00000000
+#define FLASH_SIZE       0x800000
+#define FLASH_WIDTH      4
+
+#define SRAM_START       0x60000000
+#define SRAM_SIZE        0xc000
+#define SRAM_WIDTH       4
+
+#define BOOTROM_START    0x70000000
+#define BOOTROM_SIZE     0x80
+#define BOOTROM_WIDTH    4
 
 
 static struct mtd_info *flash_mtd;
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
index 35fef655ccc4..3b959fad1c4e 100644
--- a/drivers/mtd/maps/h720x-flash.c
+++ b/drivers/mtd/maps/h720x-flash.c
@@ -24,8 +24,8 @@ static struct mtd_info *mymtd;
 static struct map_info h720x_map = {
         .name =         "H720X",
         .bankwidth =    4,
-        .size =         FLASH_SIZE,
-        .phys =         FLASH_PHYS,
+        .size =         H720X_FLASH_SIZE,
+        .phys =         H720X_FLASH_PHYS,
 };
 
 static struct mtd_partition h720x_partitions[] = {
@@ -70,7 +70,7 @@ int __init h720x_mtd_init(void)
 
         char    *part_type = NULL;
 
-        h720x_map.virt = ioremap(FLASH_PHYS, FLASH_SIZE);
+        h720x_map.virt = ioremap(h720x_map.phys, h720x_map.size);
 
         if (!h720x_map.virt) {
                 printk(KERN_ERR "H720x-MTD: ioremap failed\n");
diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c
index 8cbc1b59bd62..4a7700620119 100644
--- a/drivers/net/atl1e/atl1e_hw.c
+++ b/drivers/net/atl1e/atl1e_hw.c
@@ -163,9 +163,6 @@ int atl1e_read_mac_addr(struct atl1e_hw *hw)
  * atl1e_hash_mc_addr
  *  purpose
  *      set hash value for a multicast address
- *      hash calcu processing :
- *          1. calcu 32bit CRC for multicast address
- *          2. reverse crc with MSB to LSB
  */
 u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr)
 {
@@ -174,7 +171,6 @@ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr)
         int i;
 
         crc32 = ether_crc_le(6, mc_addr);
-        crc32 = ~crc32;
         for (i = 0; i < 32; i++)
                 value |= (((crc32 >> i) & 1) << (31 - i));
 
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 246d92b42636..aef403d299ee 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -3404,14 +3404,8 @@ static void atl1_get_wol(struct net_device *netdev,
 {
         struct atl1_adapter *adapter = netdev_priv(netdev);
 
-        wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC;
+        wol->supported = WAKE_MAGIC;
         wol->wolopts = 0;
-        if (adapter->wol & ATLX_WUFC_EX)
-                wol->wolopts |= WAKE_UCAST;
-        if (adapter->wol & ATLX_WUFC_MC)
-                wol->wolopts |= WAKE_MCAST;
-        if (adapter->wol & ATLX_WUFC_BC)
-                wol->wolopts |= WAKE_BCAST;
         if (adapter->wol & ATLX_WUFC_MAG)
                 wol->wolopts |= WAKE_MAGIC;
         return;
@@ -3422,15 +3416,10 @@ static int atl1_set_wol(struct net_device *netdev,
 {
         struct atl1_adapter *adapter = netdev_priv(netdev);
 
-        if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+        if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
+                WAKE_ARP | WAKE_MAGICSECURE))
                 return -EOPNOTSUPP;
         adapter->wol = 0;
-        if (wol->wolopts & WAKE_UCAST)
-                adapter->wol |= ATLX_WUFC_EX;
-        if (wol->wolopts & WAKE_MCAST)
-                adapter->wol |= ATLX_WUFC_MC;
-        if (wol->wolopts & WAKE_BCAST)
-                adapter->wol |= ATLX_WUFC_BC;
         if (wol->wolopts & WAKE_MAGIC)
                 adapter->wol |= ATLX_WUFC_MAG;
         return 0;
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 430d430bce29..d07e3f148951 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7204,10 +7204,13 @@ static void
 poll_bnx2(struct net_device *dev)
 {
         struct bnx2 *bp = netdev_priv(dev);
+        int i;
 
-        disable_irq(bp->pdev->irq);
-        bnx2_interrupt(bp->pdev->irq, dev);
-        enable_irq(bp->pdev->irq);
+        for (i = 0; i < bp->irq_nvecs; i++) {
+                disable_irq(bp->irq_tbl[i].vector);
+                bnx2_interrupt(bp->irq_tbl[i].vector, &bp->bnx2_napi[i]);
+                enable_irq(bp->irq_tbl[i].vector);
+        }
 }
 #endif
 
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 1ace41a13ac3..2c341f83d327 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -1307,8 +1307,10 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
         u32 fw_vers = 0;
         u32 tp_vers = 0;
 
+        spin_lock(&adapter->stats_lock);
         t3_get_fw_version(adapter, &fw_vers);
         t3_get_tp_version(adapter, &tp_vers);
+        spin_unlock(&adapter->stats_lock);
 
         strcpy(info->driver, DRV_NAME);
         strcpy(info->version, DRV_VERSION);
@@ -2699,7 +2701,7 @@ static void set_nqsets(struct adapter *adap)
         int hwports = adap->params.nports;
         int nqsets = SGE_QSETS;
 
-        if (adap->params.rev > 0) {
+        if (adap->params.rev > 0 && adap->flags & USING_MSIX) {
                 if (hwports == 2 &&
                     (hwports * nqsets > SGE_QSETS ||
                      num_cpus >= nqsets / hwports))
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 968f64be3743..9a0898b0dbce 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -572,7 +572,7 @@ struct t3_vpd {
         u32 pad;                /* for multiple-of-4 sizing and alignment */
 };
 
-#define EEPROM_MAX_POLL   4
+#define EEPROM_MAX_POLL   40
 #define EEPROM_STAT_ADDR  0x4000
 #define VPD_BASE          0xc00
 
@@ -3690,6 +3690,12 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
                         ;
 
                 pti = &port_types[adapter->params.vpd.port_type[j]];
+                if (!pti->phy_prep) {
+                        CH_ALERT(adapter, "Invalid port type index %d\n",
+                                 adapter->params.vpd.port_type[j]);
+                        return -EINVAL;
+                }
+
                 ret = pti->phy_prep(&p->phy, adapter, ai->phy_base_addr + j,
                                     ai->mdio_ops);
                 if (ret)
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 3d69fae781cf..e8bfcce6b319 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -166,7 +166,7 @@
 
 #define DRV_NAME                "e100"
 #define DRV_EXT                 "-NAPI"
-#define DRV_VERSION             "3.5.23-k4"DRV_EXT
+#define DRV_VERSION             "3.5.23-k6"DRV_EXT
 #define DRV_DESCRIPTION         "Intel(R) PRO/100 Network Driver"
 #define DRV_COPYRIGHT           "Copyright(c) 1999-2006 Intel Corporation"
 #define PFX                     DRV_NAME ": "
@@ -1804,7 +1804,7 @@ static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
                 struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
                 put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
                 pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
-                        sizeof(struct rfd), PCI_DMA_TODEVICE);
+                        sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
         }
 
         return 0;
@@ -1823,7 +1823,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 
         /* Need to sync before taking a peek at cb_complete bit */
         pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr,
-                sizeof(struct rfd), PCI_DMA_FROMDEVICE);
+                sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
         rfd_status = le16_to_cpu(rfd->status);
 
         DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status);
@@ -1850,7 +1850,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 
         /* Get data */
         pci_unmap_single(nic->pdev, rx->dma_addr,
-                RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+                RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
 
         /* If this buffer has the el bit, but we think the receiver
          * is still running, check to see if it really stopped while
@@ -1943,7 +1943,7 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
                 new_before_last_rfd->command |= cpu_to_le16(cb_el);
                 pci_dma_sync_single_for_device(nic->pdev,
                         new_before_last_rx->dma_addr, sizeof(struct rfd),
-                        PCI_DMA_TODEVICE);
+                        PCI_DMA_BIDIRECTIONAL);
 
                 /* Now that we have a new stopping point, we can clear the old
                  * stopping point.  We must sync twice to get the proper
@@ -1951,11 +1951,11 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
                 old_before_last_rfd->command &= ~cpu_to_le16(cb_el);
                 pci_dma_sync_single_for_device(nic->pdev,
                         old_before_last_rx->dma_addr, sizeof(struct rfd),
-                        PCI_DMA_TODEVICE);
+                        PCI_DMA_BIDIRECTIONAL);
                 old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
                 pci_dma_sync_single_for_device(nic->pdev,
                         old_before_last_rx->dma_addr, sizeof(struct rfd),
-                        PCI_DMA_TODEVICE);
+                        PCI_DMA_BIDIRECTIONAL);
         }
 
         if(restart_required) {
@@ -1978,7 +1978,7 @@ static void e100_rx_clean_list(struct nic *nic)
                 for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
                         if(rx->skb) {
                                 pci_unmap_single(nic->pdev, rx->dma_addr,
-                                        RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+                                        RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
                                 dev_kfree_skb(rx->skb);
                         }
                 }
@@ -2021,7 +2021,7 @@ static int e100_rx_alloc_list(struct nic *nic)
         before_last->command |= cpu_to_le16(cb_el);
         before_last->size = 0;
         pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
-                sizeof(struct rfd), PCI_DMA_TODEVICE);
+                sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
 
         nic->rx_to_use = nic->rx_to_clean = nic->rxs;
         nic->ru_running = RU_SUSPENDED;
@@ -2222,7 +2222,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
         msleep(10);
 
         pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
-                        RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+                        RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
 
         if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
            skb->data, ETH_DATA_LEN))
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 6a3893acfe04..c854c96f5ab3 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -1774,7 +1774,8 @@ static void e1000_get_wol(struct net_device *netdev,
 
         /* this function will set ->supported = 0 and return 1 if wol is not
          * supported by this hardware */
-        if (e1000_wol_exclusion(adapter, wol))
+        if (e1000_wol_exclusion(adapter, wol) ||
+            !device_can_wakeup(&adapter->pdev->dev))
                 return;
 
         /* apply any specific unsupported masks here */
@@ -1811,7 +1812,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
         if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
                 return -EOPNOTSUPP;
 
-        if (e1000_wol_exclusion(adapter, wol))
+        if (e1000_wol_exclusion(adapter, wol) ||
+            !device_can_wakeup(&adapter->pdev->dev))
                 return wol->wolopts ? -EOPNOTSUPP : 0;
 
         switch (hw->device_id) {
@@ -1838,6 +1840,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
         if (wol->wolopts & WAKE_MAGIC)
                 adapter->wol |= E1000_WUFC_MAG;
 
+        device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
         return 0;
 }
 
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index fac82152e4c8..872799b746f5 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1179,6 +1179,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 
         /* initialize the wol settings based on the eeprom settings */
         adapter->wol = adapter->eeprom_wol;
+        device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
         /* print bus type/speed/width info */
         DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index c55de1c027af..c55fd6fdb91c 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -299,6 +299,7 @@ struct e1000_adapter {
         unsigned long led_status;
 
         unsigned int flags;
+        unsigned int flags2;
         struct work_struct downshift_task;
         struct work_struct update_phy_task;
 };
@@ -306,6 +307,7 @@ struct e1000_adapter {
 struct e1000_info {
         enum e1000_mac_type     mac;
         unsigned int            flags;
+        unsigned int            flags2;
         u32                     pba;
         s32                     (*get_variants)(struct e1000_adapter *);
         struct e1000_mac_operations *mac_ops;
@@ -347,6 +349,9 @@ struct e1000_info {
 #define FLAG_RX_RESTART_NOW               (1 << 30)
 #define FLAG_MSI_TEST_FAILED              (1 << 31)
 
+/* CRC Stripping defines */
+#define FLAG2_CRC_STRIPPING               (1 << 0)
+
 #define E1000_RX_DESC_PS(R, i)      \
         (&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
 #define E1000_GET_DESC(R, i, type)      (&(((struct type *)((R).desc))[i]))
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 70c11c811a08..62421ce96311 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1713,7 +1713,8 @@ static void e1000_get_wol(struct net_device *netdev,
         wol->supported = 0;
         wol->wolopts = 0;
 
-        if (!(adapter->flags & FLAG_HAS_WOL))
+        if (!(adapter->flags & FLAG_HAS_WOL) ||
+            !device_can_wakeup(&adapter->pdev->dev))
                 return;
 
         wol->supported = WAKE_UCAST | WAKE_MCAST |
@@ -1751,7 +1752,8 @@ static int e1000_set_wol(struct net_device *netdev,
         if (wol->wolopts & WAKE_MAGICSECURE)
                 return -EOPNOTSUPP;
 
-        if (!(adapter->flags & FLAG_HAS_WOL))
+        if (!(adapter->flags & FLAG_HAS_WOL) ||
+            !device_can_wakeup(&adapter->pdev->dev))
                 return wol->wolopts ? -EOPNOTSUPP : 0;
 
         /* these settings will always override what we currently have */
@@ -1770,6 +1772,8 @@ static int e1000_set_wol(struct net_device *netdev,
         if (wol->wolopts & WAKE_ARP)
                 adapter->wol |= E1000_WUFC_ARP;
 
+        device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
         return 0;
 }
 
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index abd492b7336d..91795f78c3e4 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -499,6 +499,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
                         goto next_desc;
                 }
 
+                /* adjust length to remove Ethernet CRC */
+                if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+                        length -= 4;
+
                 total_rx_bytes += length;
                 total_rx_packets++;
 
@@ -804,6 +808,10 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
                         pci_dma_sync_single_for_device(pdev, ps_page->dma,
                                 PAGE_SIZE, PCI_DMA_FROMDEVICE);
 
+                        /* remove the CRC */
+                        if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+                                l1 -= 4;
+
                         skb_put(skb, l1);
                         goto copydone;
                 } /* if */
@@ -825,6 +833,12 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
                         skb->truesize += length;
                 }
 
+                /* strip the ethernet crc, problem is we're using pages now so
+                 * this whole operation can get a little cpu intensive
+                 */
+                if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+                        pskb_trim(skb, skb->len - 4);
+
 copydone:
                 total_rx_bytes += skb->len;
                 total_rx_packets++;
@@ -2301,8 +2315,12 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
         else
                 rctl |= E1000_RCTL_LPE;
 
-        /* Enable hardware CRC frame stripping */
-        rctl |= E1000_RCTL_SECRC;
+        /* Some systems expect that the CRC is included in SMBUS traffic. The
+         * hardware strips the CRC before sending to both SMBUS (BMC) and to
+         * host memory when this is enabled
+         */
+        if (adapter->flags2 & FLAG2_CRC_STRIPPING)
+                rctl |= E1000_RCTL_SECRC;
 
         /* Setup buffer sizes */
         rctl &= ~E1000_RCTL_SZ_4096;
@@ -4766,6 +4784,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
         adapter->ei = ei;
         adapter->pba = ei->pba;
         adapter->flags = ei->flags;
+        adapter->flags2 = ei->flags2;
         adapter->hw.adapter = adapter;
         adapter->hw.mac.type = ei->mac;
         adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
@@ -4970,6 +4989,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 
         /* initialize the wol settings based on the eeprom settings */
         adapter->wol = adapter->eeprom_wol;
+        device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
         /* reset the hardware with the new settings */
         e1000e_reset(adapter);
@@ -5008,6 +5028,7 @@ err_hw_init:
 err_sw_init:
         if (adapter->hw.flash_address)
                 iounmap(adapter->hw.flash_address);
+        e1000e_reset_interrupt_capability(adapter);
 err_flashmap:
         iounmap(adapter->hw.hw_addr);
 err_ioremap:
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 77a3d7207a5f..e909f96698e8 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -151,6 +151,16 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
  */
 E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
 
+/*
+ * Enable CRC Stripping
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \
+                          "the CRC");
+
 struct e1000_option {
         enum { enable_option, range_option, list_option } type;
         const char *name;
@@ -404,6 +414,21 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
                                 adapter->flags |= FLAG_SMART_POWER_DOWN;
                 }
         }
+        { /* CRC Stripping */
+                const struct e1000_option opt = {
+                        .type = enable_option,
+                        .name = "CRC Stripping",
+                        .err  = "defaulting to enabled",
+                        .def  = OPTION_ENABLED
+                };
+
+                if (num_CrcStripping > bd) {
+                        unsigned int crc_stripping = CrcStripping[bd];
+                        e1000_validate_option(&crc_stripping, &opt, adapter);
+                        if (crc_stripping == OPTION_ENABLED)
+                                adapter->flags2 |= FLAG2_CRC_STRIPPING;
+                }
+        }
         { /* Kumeran Lock Loss Workaround */
                 const struct e1000_option opt = {
                         .type = enable_option,
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 83a5cb6aa23b..c4af949bf860 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1407,6 +1407,10 @@ static int gfar_clean_tx_ring(struct net_device *dev)
                 if (bdp->status & TXBD_DEF)
                         dev->stats.collisions++;
 
+                /* Unmap the DMA memory */
+                dma_unmap_single(&priv->dev->dev, bdp->bufPtr,
+                                bdp->length, DMA_TO_DEVICE);
+
                 /* Free the sk buffer associated with this TxBD */
                 dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]);
 
@@ -1666,6 +1670,9 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
 
                 skb = priv->rx_skbuff[priv->skb_currx];
 
+                dma_unmap_single(&priv->dev->dev, bdp->bufPtr,
+                                priv->rx_buffer_size, DMA_FROM_DEVICE);
+
                 /* We drop the frame if we failed to allocate a new buffer */
                 if (unlikely(!newskb || !(bdp->status & RXBD_LAST) ||
                                  bdp->status & RXBD_ERR)) {
@@ -1674,14 +1681,8 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
                         if (unlikely(!newskb))
                                 newskb = skb;
 
-                        if (skb) {
-                                dma_unmap_single(&priv->dev->dev,
-                                                bdp->bufPtr,
-                                                priv->rx_buffer_size,
-                                                DMA_FROM_DEVICE);
-
+                        if (skb)
                                 dev_kfree_skb_any(skb);
-                        }
                 } else {
                         /* Increment the number of packets */
                         dev->stats.rx_packets++;
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 58906c984be9..89964fa739a0 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -1776,7 +1776,8 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 
         /* this function will set ->supported = 0 and return 1 if wol is not
          * supported by this hardware */
-        if (igb_wol_exclusion(adapter, wol))
+        if (igb_wol_exclusion(adapter, wol) ||
+            !device_can_wakeup(&adapter->pdev->dev))
                 return;
 
         /* apply any specific unsupported masks here */
@@ -1805,7 +1806,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
         if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
                 return -EOPNOTSUPP;
 
-        if (igb_wol_exclusion(adapter, wol))
+        if (igb_wol_exclusion(adapter, wol) ||
+            !device_can_wakeup(&adapter->pdev->dev))
                 return wol->wolopts ? -EOPNOTSUPP : 0;
 
         switch (hw->device_id) {
@@ -1825,6 +1827,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
         if (wol->wolopts & WAKE_MAGIC)
                 adapter->wol |= E1000_WUFC_MAG;
 
+        device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
         return 0;
 }
 
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 1f397cd99414..1cbae85b1426 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1019,10 +1019,9 @@ static int __devinit igb_probe(struct pci_dev *pdev,
                         state &= ~PCIE_LINK_STATE_L0S;
                         pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL,
                                               state);
-                        printk(KERN_INFO "Disabling ASPM L0s upstream switch "
-                               "port %x:%x.%x\n", us_dev->bus->number,
-                               PCI_SLOT(us_dev->devfn),
-                               PCI_FUNC(us_dev->devfn));
+                        dev_info(&pdev->dev,
+                                 "Disabling ASPM L0s upstream switch port %s\n",
+                                 pci_name(us_dev));
                 }
         default:
                 break;
@@ -1244,6 +1243,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 
         /* initialize the wol settings based on the eeprom settings */
         adapter->wol = adapter->eeprom_wol;
+        device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
         /* reset the hardware with the new settings */
         igb_reset(adapter);
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index a339afbeed38..96e709d6440a 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -656,10 +656,10 @@ static int mlx4_en_start_port(struct net_device *dev)
         /* Configure port */
         err = mlx4_SET_PORT_general(mdev->dev, priv->port,
                                     priv->rx_skb_size + ETH_FCS_LEN,
-                                    mdev->profile.tx_pause,
-                                    mdev->profile.tx_ppp,
-                                    mdev->profile.rx_pause,
-                                    mdev->profile.rx_ppp);
+                                    priv->prof->tx_pause,
+                                    priv->prof->tx_ppp,
+                                    priv->prof->rx_pause,
+                                    priv->prof->rx_ppp);
         if (err) {
                 mlx4_err(mdev, "Failed setting port general configurations"
                                " for port %d, with error %d\n", priv->port, err);
@@ -706,7 +706,7 @@ tx_err:
         mlx4_en_release_rss_steer(priv);
 rx_err:
         for (i = 0; i < priv->rx_ring_num; i++)
-                mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[rx_index]);
+                mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]);
 cq_err:
         while (rx_index--)
                 mlx4_en_deactivate_cq(priv, &priv->rx_cq[rx_index]);
diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_params.c
index c2e69b1bcd0a..95706ee1c019 100644
--- a/drivers/net/mlx4/en_params.c
+++ b/drivers/net/mlx4/en_params.c
@@ -90,6 +90,7 @@ MLX4_EN_PARM_INT(rx_ring_size2, MLX4_EN_AUTO_CONF, "Rx ring size for port 2");
 int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
 {
         struct mlx4_en_profile *params = &mdev->profile;
+        int i;
 
         params->rx_moder_cnt = min_t(int, rx_moder_cnt, MLX4_EN_AUTO_CONF);
         params->rx_moder_time = min_t(int, rx_moder_time, MLX4_EN_AUTO_CONF);
@@ -97,11 +98,13 @@ int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
         params->rss_xor = (rss_xor != 0);
         params->rss_mask = rss_mask & 0x1f;
         params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS);
-        params->rx_pause = pprx;
-        params->rx_ppp = pfcrx;
-        params->tx_pause = pptx;
-        params->tx_ppp = pfctx;
-        if (params->rx_ppp || params->tx_ppp) {
+        for (i = 1; i <= MLX4_MAX_PORTS; i++) {
+                params->prof[i].rx_pause = pprx;
+                params->prof[i].rx_ppp = pfcrx;
+                params->prof[i].tx_pause = pptx;
+                params->prof[i].tx_ppp = pfctx;
+        }
+        if (pfcrx || pfctx) {
                 params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM;
                 params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM;
         } else {
@@ -407,14 +410,14 @@ static int mlx4_en_set_pauseparam(struct net_device *dev,
         struct mlx4_en_dev *mdev = priv->mdev;
         int err;
 
-        mdev->profile.tx_pause = pause->tx_pause != 0;
-        mdev->profile.rx_pause = pause->rx_pause != 0;
+        priv->prof->tx_pause = pause->tx_pause != 0;
+        priv->prof->rx_pause = pause->rx_pause != 0;
         err = mlx4_SET_PORT_general(mdev->dev, priv->port,
                                     priv->rx_skb_size + ETH_FCS_LEN,
-                                    mdev->profile.tx_pause,
-                                    mdev->profile.tx_ppp,
-                                    mdev->profile.rx_pause,
-                                    mdev->profile.rx_ppp);
+                                    priv->prof->tx_pause,
+                                    priv->prof->tx_ppp,
+                                    priv->prof->rx_pause,
+                                    priv->prof->rx_ppp);
         if (err)
                 mlx4_err(mdev, "Failed setting pause params to\n");
 
@@ -425,10 +428,9 @@ static void mlx4_en_get_pauseparam(struct net_device *dev,
                                  struct ethtool_pauseparam *pause)
 {
         struct mlx4_en_priv *priv = netdev_priv(dev);
-        struct mlx4_en_dev *mdev = priv->mdev;
 
-        pause->tx_pause = mdev->profile.tx_pause;
-        pause->rx_pause = mdev->profile.rx_pause;
+        pause->tx_pause = priv->prof->tx_pause;
+        pause->rx_pause = priv->prof->rx_pause;
 }
 
 static void mlx4_en_get_ringparam(struct net_device *dev,
diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
index fa431fad0eec..56a2e213fe62 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/mlx4/mlx4.h
@@ -87,6 +87,9 @@ enum {
 
 #ifdef CONFIG_MLX4_DEBUG
 extern int mlx4_debug_level;
+#else /* CONFIG_MLX4_DEBUG */
+#define mlx4_debug_level        (0)
+#endif /* CONFIG_MLX4_DEBUG */
 
 #define mlx4_dbg(mdev, format, arg...)                                  \
         do {                                                            \
@@ -94,12 +97,6 @@ extern int mlx4_debug_level;
                         dev_printk(KERN_DEBUG, &mdev->pdev->dev, format, ## arg); \
         } while (0)
 
-#else /* CONFIG_MLX4_DEBUG */
-
-#define mlx4_dbg(mdev, format, arg...) do { (void) mdev; } while (0)
-
-#endif /* CONFIG_MLX4_DEBUG */
-
 #define mlx4_err(mdev, format, arg...) \
         dev_err(&mdev->pdev->dev, format, ## arg)
 #define mlx4_info(mdev, format, arg...) \
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index 11fb17c6e97b..98ddc0811f93 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -322,6 +322,10 @@ struct mlx4_en_port_profile {
         u32 rx_ring_num;
         u32 tx_ring_size;
         u32 rx_ring_size;
+        u8 rx_pause;
+        u8 rx_ppp;
+        u8 tx_pause;
+        u8 tx_ppp;
 };
 
 struct mlx4_en_profile {
@@ -333,10 +337,6 @@ struct mlx4_en_profile {
         int rx_moder_cnt;
         int rx_moder_time;
         int auto_moder;
-        u8 rx_pause;
-        u8 rx_ppp;
-        u8 tx_pause;
-        u8 tx_ppp;
         u8 no_reset;
         struct mlx4_en_port_profile prof[MLX4_MAX_PORTS + 1];
 };
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index a5f428bcc0eb..b37867097308 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -75,7 +75,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.4.3-1.375"
+#define MYRI10GE_VERSION_STR "1.4.3-1.378"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -1393,6 +1393,7 @@ myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index)
                 if (tx->req == tx->done) {
                         tx->queue_active = 0;
                         put_be32(htonl(1), tx->send_stop);
+                        mb();
                         mmiowb();
                 }
                 __netif_tx_unlock(dev_queue);
@@ -2865,6 +2866,7 @@ again:
         if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) {
                 tx->queue_active = 1;
                 put_be32(htonl(1), tx->send_go);
+                mb();
                 mmiowb();
         }
         tx->pkt_start++;
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 9acb5d70a3ae..1b6f548c4411 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -33,8 +33,8 @@
 
 #define DRV_MODULE_NAME         "niu"
 #define PFX DRV_MODULE_NAME     ": "
-#define DRV_MODULE_VERSION      "0.9"
-#define DRV_MODULE_RELDATE      "May 4, 2008"
+#define DRV_MODULE_VERSION      "1.0"
+#define DRV_MODULE_RELDATE      "Nov 14, 2008"
 
 static char version[] __devinitdata =
         DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
@@ -51,8 +51,7 @@ MODULE_VERSION(DRV_MODULE_VERSION);
 #ifndef readq
 static u64 readq(void __iomem *reg)
 {
-        return (((u64)readl(reg + 0x4UL) << 32) |
-                (u64)readl(reg));
+        return ((u64) readl(reg)) | (((u64) readl(reg + 4UL)) << 32);
 }
 
 static void writeq(u64 val, void __iomem *reg)
@@ -407,7 +406,7 @@ static int esr2_set_rx_cfg(struct niu *np, unsigned long channel, u32 val)
 }
 
 /* Mode is always 10G fiber.  */
-static int serdes_init_niu(struct niu *np)
+static int serdes_init_niu_10g_fiber(struct niu *np)
 {
         struct niu_link_config *lp = &np->link_config;
         u32 tx_cfg, rx_cfg;
@@ -444,6 +443,223 @@ static int serdes_init_niu(struct niu *np)
         return 0;
 }
 
+static int serdes_init_niu_1g_serdes(struct niu *np)
+{
+        struct niu_link_config *lp = &np->link_config;
+        u16 pll_cfg, pll_sts;
+        int max_retry = 100;
+        u64 sig, mask, val;
+        u32 tx_cfg, rx_cfg;
+        unsigned long i;
+        int err;
+
+        tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV |
+                  PLL_TX_CFG_RATE_HALF);
+        rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT |
+                  PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH |
+                  PLL_RX_CFG_RATE_HALF);
+
+        if (np->port == 0)
+                rx_cfg |= PLL_RX_CFG_EQ_LP_ADAPTIVE;
+
+        if (lp->loopback_mode == LOOPBACK_PHY) {
+                u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS;
+
+                mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                           ESR2_TI_PLL_TEST_CFG_L, test_cfg);
+
+                tx_cfg |= PLL_TX_CFG_ENTEST;
+                rx_cfg |= PLL_RX_CFG_ENTEST;
+        }
+
+        /* Initialize PLL for 1G */
+        pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_8X);
+
+        err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                         ESR2_TI_PLL_CFG_L, pll_cfg);
+        if (err) {
+                dev_err(np->device, PFX "NIU Port %d "
+                        "serdes_init_niu_1g_serdes: "
+                        "mdio write to ESR2_TI_PLL_CFG_L failed", np->port);
+                return err;
+        }
+
+        pll_sts = PLL_CFG_ENPLL;
+
+        err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                         ESR2_TI_PLL_STS_L, pll_sts);
+        if (err) {
+                dev_err(np->device, PFX "NIU Port %d "
+                        "serdes_init_niu_1g_serdes: "
+                        "mdio write to ESR2_TI_PLL_STS_L failed", np->port);
+                return err;
+        }
+
+        udelay(200);
+
+        /* Initialize all 4 lanes of the SERDES.  */
+        for (i = 0; i < 4; i++) {
+                err = esr2_set_tx_cfg(np, i, tx_cfg);
+                if (err)
+                        return err;
+        }
+
+        for (i = 0; i < 4; i++) {
+                err = esr2_set_rx_cfg(np, i, rx_cfg);
+                if (err)
+                        return err;
+        }
+
+        switch (np->port) {
+        case 0:
+                val = (ESR_INT_SRDY0_P0 | ESR_INT_DET0_P0);
+                mask = val;
+                break;
+
+        case 1:
+                val = (ESR_INT_SRDY0_P1 | ESR_INT_DET0_P1);
+                mask = val;
+                break;
+
+        default:
+                return -EINVAL;
+        }
+
+        while (max_retry--) {
+                sig = nr64(ESR_INT_SIGNALS);
+                if ((sig & mask) == val)
+                        break;
+
+                mdelay(500);
+        }
+
+        if ((sig & mask) != val) {
+                dev_err(np->device, PFX "Port %u signal bits [%08x] are not "
+                        "[%08x]\n", np->port, (int) (sig & mask), (int) val);
+                return -ENODEV;
+        }
+
+        return 0;
+}
+
+static int serdes_init_niu_10g_serdes(struct niu *np)
+{
+        struct niu_link_config *lp = &np->link_config;
+        u32 tx_cfg, rx_cfg, pll_cfg, pll_sts;
+        int max_retry = 100;
+        u64 sig, mask, val;
+        unsigned long i;
+        int err;
+
+        tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV);
+        rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT |
+                  PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH |
+                  PLL_RX_CFG_EQ_LP_ADAPTIVE);
+
+        if (lp->loopback_mode == LOOPBACK_PHY) {
+                u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS;
+
+                mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                           ESR2_TI_PLL_TEST_CFG_L, test_cfg);
+
+                tx_cfg |= PLL_TX_CFG_ENTEST;
+                rx_cfg |= PLL_RX_CFG_ENTEST;
+        }
+
+        /* Initialize PLL for 10G */
+        pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_10X);
+
+        err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                         ESR2_TI_PLL_CFG_L, pll_cfg & 0xffff);
+        if (err) {
+                dev_err(np->device, PFX "NIU Port %d "
+                        "serdes_init_niu_10g_serdes: "
+                        "mdio write to ESR2_TI_PLL_CFG_L failed", np->port);
+                return err;
+        }
+
+        pll_sts = PLL_CFG_ENPLL;
+
+        err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+                         ESR2_TI_PLL_STS_L, pll_sts & 0xffff);
+        if (err) {
+                dev_err(np->device, PFX "NIU Port %d "
+                        "serdes_init_niu_10g_serdes: "
+                        "mdio write to ESR2_TI_PLL_STS_L failed", np->port);
+                return err;
+        }
+
+        udelay(200);
+
+        /* Initialize all 4 lanes of the SERDES.  */
+        for (i = 0; i < 4; i++) {
+                err = esr2_set_tx_cfg(np, i, tx_cfg);
+                if (err)
+                        return err;
+        }
+
+        for (i = 0; i < 4; i++) {
+                err = esr2_set_rx_cfg(np, i, rx_cfg);
+                if (err)
+                        return err;
+        }
+
+        /* check if serdes is ready */
+
+        switch (np->port) {
+        case 0:
+                mask = ESR_INT_SIGNALS_P0_BITS;
+                val = (ESR_INT_SRDY0_P0 |
+                       ESR_INT_DET0_P0 |
+                       ESR_INT_XSRDY_P0 |
+                       ESR_INT_XDP_P0_CH3 |
+                       ESR_INT_XDP_P0_CH2 |
+                       ESR_INT_XDP_P0_CH1 |
+                       ESR_INT_XDP_P0_CH0);
+                break;
+
+        case 1:
+                mask = ESR_INT_SIGNALS_P1_BITS;
+                val = (ESR_INT_SRDY0_P1 |
+                       ESR_INT_DET0_P1 |
+                       ESR_INT_XSRDY_P1 |
+                       ESR_INT_XDP_P1_CH3 |
+                       ESR_INT_XDP_P1_CH2 |
+                       ESR_INT_XDP_P1_CH1 |
+                       ESR_INT_XDP_P1_CH0);
+                break;
+
+        default:
+                return -EINVAL;
+        }
+
+        while (max_retry--) {
+                sig = nr64(ESR_INT_SIGNALS);
+                if ((sig & mask) == val)
+                        break;
+
+                mdelay(500);
+        }
+
+        if ((sig & mask) != val) {
+                pr_info(PFX "NIU Port %u signal bits [%08x] are not "
+                        "[%08x] for 10G...trying 1G\n",
+                        np->port, (int) (sig & mask), (int) val);
+
+                /* 10G failed, try initializing at 1G */
+                err = serdes_init_niu_1g_serdes(np);
+                if (!err) {
+                        np->flags &= ~NIU_FLAGS_10G;
+                        np->mac_xcvr = MAC_XCVR_PCS;
+                }  else {
+                        dev_err(np->device, PFX "Port %u 10G/1G SERDES "
+                                "Link Failed \n", np->port);
+                        return -ENODEV;
+                }
+        }
+        return 0;
+}
+
 static int esr_read_rxtx_ctrl(struct niu *np, unsigned long chan, u32 *val)
 {
         int err;
@@ -1955,13 +2171,23 @@ static const struct niu_phy_ops phy_ops_10g_serdes = {
         .link_status            = link_status_10g_serdes,
 };
 
+static const struct niu_phy_ops phy_ops_10g_serdes_niu = {
+        .serdes_init            = serdes_init_niu_10g_serdes,
+        .link_status            = link_status_10g_serdes,
+};
+
+static const struct niu_phy_ops phy_ops_1g_serdes_niu = {
+        .serdes_init            = serdes_init_niu_1g_serdes,
+        .link_status            = link_status_1g_serdes,
+};
+
 static const struct niu_phy_ops phy_ops_1g_rgmii = {
         .xcvr_init              = xcvr_init_1g_rgmii,
         .link_status            = link_status_1g_rgmii,
 };
 
 static const struct niu_phy_ops phy_ops_10g_fiber_niu = {
-        .serdes_init            = serdes_init_niu,
+        .serdes_init            = serdes_init_niu_10g_fiber,
         .xcvr_init              = xcvr_init_10g,
         .link_status            = link_status_10g,
 };
@@ -1999,11 +2225,21 @@ struct niu_phy_template {
         u32                             phy_addr_base;
 };
 
-static const struct niu_phy_template phy_template_niu = {
+static const struct niu_phy_template phy_template_niu_10g_fiber = {
         .ops            = &phy_ops_10g_fiber_niu,
         .phy_addr_base  = 16,
 };
 
+static const struct niu_phy_template phy_template_niu_10g_serdes = {
+        .ops            = &phy_ops_10g_serdes_niu,
+        .phy_addr_base  = 0,
+};
+
+static const struct niu_phy_template phy_template_niu_1g_serdes = {
+        .ops            = &phy_ops_1g_serdes_niu,
+        .phy_addr_base  = 0,
+};
+
 static const struct niu_phy_template phy_template_10g_fiber = {
         .ops            = &phy_ops_10g_fiber,
         .phy_addr_base  = 8,
@@ -2183,8 +2419,25 @@ static int niu_determine_phy_disposition(struct niu *np)
         u32 phy_addr_off = 0;
 
         if (plat_type == PLAT_TYPE_NIU) {
-                tp = &phy_template_niu;
-                phy_addr_off += np->port;
+                switch (np->flags &
+                        (NIU_FLAGS_10G |
+                         NIU_FLAGS_FIBER |
+                         NIU_FLAGS_XCVR_SERDES)) {
+                case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES:
+                        /* 10G Serdes */
+                        tp = &phy_template_niu_10g_serdes;
+                        break;
+                case NIU_FLAGS_XCVR_SERDES:
+                        /* 1G Serdes */
+                        tp = &phy_template_niu_1g_serdes;
+                        break;
+                case NIU_FLAGS_10G | NIU_FLAGS_FIBER:
+                        /* 10G Fiber */
+                default:
+                        tp = &phy_template_niu_10g_fiber;
+                        phy_addr_off += np->port;
+                        break;
+                }
         } else {
                 switch (np->flags &
                         (NIU_FLAGS_10G |
@@ -7214,6 +7467,12 @@ static int __devinit niu_phy_type_prop_decode(struct niu *np,
                 np->flags |= NIU_FLAGS_10G;
                 np->flags &= ~NIU_FLAGS_FIBER;
                 np->mac_xcvr = MAC_XCVR_XPCS;
+        } else if (!strcmp(phy_prop, "xgsd") || !strcmp(phy_prop, "gsd")) {
+                /* 10G Serdes or 1G Serdes, default to 10G */
+                np->flags |= NIU_FLAGS_10G;
+                np->flags &= ~NIU_FLAGS_FIBER;
+                np->flags |= NIU_FLAGS_XCVR_SERDES;
+                np->mac_xcvr = MAC_XCVR_XPCS;
         } else {
                 return -EINVAL;
         }
@@ -7742,6 +8001,8 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent)
         u32 val;
         int err;
 
+        num_10g = num_1g = 0;
+
         if (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR) ||
             !strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) {
                 num_10g = 0;
@@ -7758,6 +8019,16 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent)
                 parent->num_ports = 2;
                 val = (phy_encode(PORT_TYPE_10G, 0) |
                        phy_encode(PORT_TYPE_10G, 1));
+        } else if ((np->flags & NIU_FLAGS_XCVR_SERDES) &&
+                   (parent->plat_type == PLAT_TYPE_NIU)) {
+                /* this is the Monza case */
+                if (np->flags & NIU_FLAGS_10G) {
+                        val = (phy_encode(PORT_TYPE_10G, 0) |
+                               phy_encode(PORT_TYPE_10G, 1));
+                } else {
+                        val = (phy_encode(PORT_TYPE_1G, 0) |
+                               phy_encode(PORT_TYPE_1G, 1));
+                }
         } else {
                 err = fill_phy_probe_info(np, parent, info);
                 if (err)
@@ -8657,7 +8928,9 @@ static void __devinit niu_device_announce(struct niu *np)
                                 dev->name,
                                 (np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"),
                                 (np->flags & NIU_FLAGS_10G ? "10G" : "1G"),
-                                (np->flags & NIU_FLAGS_FIBER ? "FIBER" : "COPPER"),
+                                (np->flags & NIU_FLAGS_FIBER ? "FIBER" :
+                                 (np->flags & NIU_FLAGS_XCVR_SERDES ? "SERDES" :
+                                  "COPPER")),
                                 (np->mac_xcvr == MAC_XCVR_MII ? "MII" :
                                  (np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")),
                                 np->vpd.phy_type);
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index c6fa883daa22..180ca8ae93de 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -1048,6 +1048,13 @@
 #define  PLL_CFG_LD_SHIFT               8
 #define  PLL_CFG_MPY                    0x0000001e
 #define  PLL_CFG_MPY_SHIFT              1
+#define  PLL_CFG_MPY_4X         0x0
+#define  PLL_CFG_MPY_5X         0x00000002
+#define  PLL_CFG_MPY_6X         0x00000004
+#define  PLL_CFG_MPY_8X         0x00000008
+#define  PLL_CFG_MPY_10X                0x0000000a
+#define  PLL_CFG_MPY_12X                0x0000000c
+#define  PLL_CFG_MPY_12P5X              0x0000000e
 #define  PLL_CFG_ENPLL                  0x00000001
 
 #define ESR2_TI_PLL_STS_L               (ESR2_BASE + 0x002)
@@ -1093,6 +1100,9 @@
 #define  PLL_TX_CFG_INVPAIR             0x00000080
 #define  PLL_TX_CFG_RATE                0x00000060
 #define  PLL_TX_CFG_RATE_SHIFT          5
+#define  PLL_TX_CFG_RATE_FULL           0x0
+#define  PLL_TX_CFG_RATE_HALF           0x20
+#define  PLL_TX_CFG_RATE_QUAD           0x40
 #define  PLL_TX_CFG_BUSWIDTH            0x0000001c
 #define  PLL_TX_CFG_BUSWIDTH_SHIFT      2
 #define  PLL_TX_CFG_ENTEST              0x00000002
@@ -1132,6 +1142,9 @@
 #define  PLL_RX_CFG_INVPAIR             0x00000080
 #define  PLL_RX_CFG_RATE                0x00000060
 #define  PLL_RX_CFG_RATE_SHIFT          5
+#define  PLL_RX_CFG_RATE_FULL           0x0
+#define  PLL_RX_CFG_RATE_HALF           0x20
+#define  PLL_RX_CFG_RATE_QUAD           0x40
 #define  PLL_RX_CFG_BUSWIDTH            0x0000001c
 #define  PLL_RX_CFG_BUSWIDTH_SHIFT      2
 #define  PLL_RX_CFG_ENTEST              0x00000002
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 4aa547947040..eb6411c4694f 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -227,6 +227,59 @@ static int m88e1111_config_init(struct phy_device *phydev)
         return 0;
 }
 
+static int m88e1118_config_aneg(struct phy_device *phydev)
+{
+        int err;
+
+        err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+        if (err < 0)
+                return err;
+
+        err = phy_write(phydev, MII_M1011_PHY_SCR,
+                        MII_M1011_PHY_SCR_AUTO_CROSS);
+        if (err < 0)
+                return err;
+
+        err = genphy_config_aneg(phydev);
+        return 0;
+}
+
+static int m88e1118_config_init(struct phy_device *phydev)
+{
+        int err;
+
+        /* Change address */
+        err = phy_write(phydev, 0x16, 0x0002);
+        if (err < 0)
+                return err;
+
+        /* Enable 1000 Mbit */
+        err = phy_write(phydev, 0x15, 0x1070);
+        if (err < 0)
+                return err;
+
+        /* Change address */
+        err = phy_write(phydev, 0x16, 0x0003);
+        if (err < 0)
+                return err;
+
+        /* Adjust LED Control */
+        err = phy_write(phydev, 0x10, 0x021e);
+        if (err < 0)
+                return err;
+
+        /* Reset address */
+        err = phy_write(phydev, 0x16, 0x0);
+        if (err < 0)
+                return err;
+
+        err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+        if (err < 0)
+                return err;
+
+        return 0;
+}
+
 static int m88e1145_config_init(struct phy_device *phydev)
 {
         int err;
@@ -416,6 +469,19 @@ static struct phy_driver marvell_drivers[] = {
                 .driver = { .owner = THIS_MODULE },
         },
         {
+                .phy_id = 0x01410e10,
+                .phy_id_mask = 0xfffffff0,
+                .name = "Marvell 88E1118",
+                .features = PHY_GBIT_FEATURES,
+                .flags = PHY_HAS_INTERRUPT,
+                .config_init = &m88e1118_config_init,
+                .config_aneg = &m88e1118_config_aneg,
+                .read_status = &genphy_read_status,
+                .ack_interrupt = &marvell_ack_interrupt,
+                .config_intr = &marvell_config_intr,
+                .driver = {.owner = THIS_MODULE,},
+        },
+        {
                 .phy_id = 0x01410cd0,
                 .phy_id_mask = 0xfffffff0,
                 .name = "Marvell 88E1145",
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index d0ed1ef284a8..536bda1f428b 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -136,7 +136,7 @@ void mdiobus_unregister(struct mii_bus *bus)
         BUG_ON(bus->state != MDIOBUS_REGISTERED);
         bus->state = MDIOBUS_UNREGISTERED;
 
-        device_unregister(&bus->dev);
+        device_del(&bus->dev);
         for (i = 0; i < PHY_MAX_ADDR; i++) {
                 if (bus->phy_map[i])
                         device_unregister(&bus->phy_map[i]->dev);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e11b03b2b25a..8fb1faca883a 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -227,8 +227,8 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
         if (r)
                 return ERR_PTR(r);
 
-        /* If the phy_id is all Fs, there is no device there */
-        if (0xffffffff == phy_id)
+        /* If the phy_id is all Fs or all 0s, there is no device there */
+        if ((0xffff == phy_id) || (0x00 == phy_id))
                 return NULL;
 
         dev = phy_device_create(bus, addr, phy_id);
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 3cdd07c45b6d..508452c02151 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -1515,9 +1515,6 @@ static u32 ql_get_link_state(struct ql3_adapter *qdev)
                 linkState = LS_UP;
         } else {
                 linkState = LS_DOWN;
-                if (netif_msg_link(qdev))
-                        printk(KERN_WARNING PFX
-                               "%s: Link is down.\n", qdev->ndev->name);
         }
         return linkState;
 }
@@ -1581,10 +1578,6 @@ static int ql_finish_auto_neg(struct ql3_adapter *qdev)
                         ql_mac_enable(qdev, 1);
                 }
 
-                if (netif_msg_link(qdev))
-                        printk(KERN_DEBUG PFX
-                               "%s: Change port_link_state LS_DOWN to LS_UP.\n",
-                               qdev->ndev->name);
                 qdev->port_link_state = LS_UP;
                 netif_start_queue(qdev->ndev);
                 netif_carrier_on(qdev->ndev);
@@ -1655,14 +1648,9 @@ static void ql_link_state_machine_work(struct work_struct *work)
                 /* Fall Through */
 
         case LS_DOWN:
-                if (netif_msg_link(qdev))
-                        printk(KERN_DEBUG PFX
-                               "%s: port_link_state = LS_DOWN.\n",
-                               qdev->ndev->name);
                 if (curr_link_state == LS_UP) {
                         if (netif_msg_link(qdev))
-                                printk(KERN_DEBUG PFX
-                                       "%s: curr_link_state = LS_UP.\n",
+                                printk(KERN_INFO PFX "%s: Link is up.\n",
                                        qdev->ndev->name);
                         if (ql_is_auto_neg_complete(qdev))
                                 ql_finish_auto_neg(qdev);
@@ -1670,6 +1658,7 @@ static void ql_link_state_machine_work(struct work_struct *work)
                         if (qdev->port_link_state == LS_UP)
                                 ql_link_down_detect_clear(qdev);
 
+                        qdev->port_link_state = LS_UP;
                 }
                 break;
 
@@ -1678,12 +1667,14 @@ static void ql_link_state_machine_work(struct work_struct *work)
                  * See if the link is currently down or went down and came
                  * back up
                  */
-                if ((curr_link_state == LS_DOWN) || ql_link_down_detect(qdev)) {
+                if (curr_link_state == LS_DOWN) {
                         if (netif_msg_link(qdev))
                                 printk(KERN_INFO PFX "%s: Link is down.\n",
                                        qdev->ndev->name);
                         qdev->port_link_state = LS_DOWN;
                 }
+                if (ql_link_down_detect(qdev))
+                        qdev->port_link_state = LS_DOWN;
                 break;
         }
         spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index fa98af58223e..cd0d0873d978 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -174,8 +174,8 @@ static struct efx_ethtool_stat efx_ethtool_stats[] = {
 
 /* EEPROM range with gPXE configuration */
 #define EFX_ETHTOOL_EEPROM_MAGIC 0xEFAB
-#define EFX_ETHTOOL_EEPROM_MIN 0x100U
-#define EFX_ETHTOOL_EEPROM_MAX 0x400U
+#define EFX_ETHTOOL_EEPROM_MIN 0x800U
+#define EFX_ETHTOOL_EEPROM_MAX 0x1800U
 
 /**************************************************************************
  *
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 5051554ff05b..1f26ab0e7986 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -2050,7 +2050,9 @@ err_out:
  */
 static int smc911x_drv_probe(struct platform_device *pdev)
 {
+#ifdef SMC_DYNAMIC_BUS_CONFIG
         struct smc911x_platdata *pd = pdev->dev.platform_data;
+#endif
         struct net_device *ndev;
         struct resource *res;
         struct smc911x_local *lp;
@@ -2182,9 +2184,9 @@ static int smc911x_drv_resume(struct platform_device *dev)
 
                 if (netif_running(ndev)) {
                         smc911x_reset(ndev);
-                        smc911x_enable(ndev);
                         if (lp->phy_type != 0)
                                 smc911x_phy_configure(&lp->phy_configure);
+                        smc911x_enable(ndev);
                         netif_device_attach(ndev);
                 }
         }
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 85f38a6b6a49..68a7f5414133 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -323,17 +323,17 @@ static void uec_get_ethtool_stats(struct net_device *netdev,
         if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE) {
                 base = (u32 __iomem *)&ugeth->ug_regs->tx64;
                 for (i = 0; i < UEC_HW_STATS_LEN; i++)
-                        data[j++] = (u64)in_be32(&base[i]);
+                        data[j++] = in_be32(&base[i]);
         }
         if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX) {
                 base = (u32 __iomem *)ugeth->p_tx_fw_statistics_pram;
                 for (i = 0; i < UEC_TX_FW_STATS_LEN; i++)
-                        data[j++] = (u64)in_be32(&base[i]);
+                        data[j++] = base ? in_be32(&base[i]) : 0;
         }
         if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX) {
                 base = (u32 __iomem *)ugeth->p_rx_fw_statistics_pram;
                 for (i = 0; i < UEC_RX_FW_STATS_LEN; i++)
-                        data[j++] = (u64)in_be32(&base[i]);
+                        data[j++] = base ? in_be32(&base[i]) : 0;
         }
 }
 
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 37ecf845edfe..e12cdb4543b4 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1444,6 +1444,10 @@ static const struct usb_device_id	products [] = {
         // Apple USB Ethernet Adapter
         USB_DEVICE(0x05ac, 0x1402),
         .driver_info = (unsigned long) &ax88772_info,
+}, {
+        // Cables-to-Go USB Ethernet Adapter
+        USB_DEVICE(0x0b95, 0x772a),
+        .driver_info = (unsigned long) &ax88772_info,
 },
         { },            // END
 };
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 1164c52e2c0a..8e90891f0e42 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2184,19 +2184,20 @@ static void hso_create_rfkill(struct hso_device *hso_dev,
                              struct usb_interface *interface)
 {
         struct hso_net *hso_net = dev2net(hso_dev);
-        struct device *dev = hso_dev->dev;
+        struct device *dev = &hso_net->net->dev;
         char *rfkn;
 
         hso_net->rfkill = rfkill_allocate(&interface_to_usbdev(interface)->dev,
-                                 RFKILL_TYPE_WLAN);
+                                 RFKILL_TYPE_WWAN);
         if (!hso_net->rfkill) {
-                dev_err(dev, "%s - Out of memory", __func__);
+                dev_err(dev, "%s - Out of memory\n", __func__);
                 return;
         }
         rfkn = kzalloc(20, GFP_KERNEL);
         if (!rfkn) {
                 rfkill_free(hso_net->rfkill);
-                dev_err(dev, "%s - Out of memory", __func__);
+                hso_net->rfkill = NULL;
+                dev_err(dev, "%s - Out of memory\n", __func__);
                 return;
         }
         snprintf(rfkn, 20, "hso-%d",
@@ -2209,7 +2210,8 @@ static void hso_create_rfkill(struct hso_device *hso_dev,
                 kfree(rfkn);
                 hso_net->rfkill->name = NULL;
                 rfkill_free(hso_net->rfkill);
-                dev_err(dev, "%s - Failed to register rfkill", __func__);
+                hso_net->rfkill = NULL;
+                dev_err(dev, "%s - Failed to register rfkill\n", __func__);
                 return;
         }
 }
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 3590ea5a902d..11cb3e504e1c 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -2296,7 +2296,7 @@ static void velocity_set_multi(struct net_device *dev)
                 }
 
                 mac_set_cam_mask(regs, vptr->mCAMmask);
-                rx_mode = (RCR_AM | RCR_AB);
+                rx_mode = RCR_AM | RCR_AB | RCR_AP;
         }
         if (dev->mtu > 1500)
                 rx_mode |= RCR_AL;
diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h
index ffdf4876121b..a68f97c39359 100644
--- a/drivers/net/wireless/hostap/hostap_wlan.h
+++ b/drivers/net/wireless/hostap/hostap_wlan.h
@@ -918,9 +918,12 @@ struct hostap_interface {
 
 /*
  * TX meta data - stored in skb->cb buffer, so this must not be increased over
- * the 40-byte limit
+ * the 48-byte limit.
+ * THE PADDING THIS STARTS WITH IS A HORRIBLE HACK THAT SHOULD NOT LIVE
+ * TO SEE THE DAY.
  */
 struct hostap_skb_tx_data {
+        unsigned int __padding_for_default_qdiscs;
         u32 magic; /* HOSTAP_SKB_TX_DATA_MAGIC */
         u8 rate; /* transmit rate */
 #define HOSTAP_TX_FLAGS_WDS BIT(0)
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index 431e3c78bf27..69eb0132593b 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -48,6 +48,9 @@ static struct usb_device_id rtl8187_table[] __devinitdata = {
         {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187},
         /* Sitecom */
         {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
+        {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
+        /* Abocom */
+        {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187},
         {}
 };
 
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index b3a63edb6901..ae5ec76dca77 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -63,7 +63,7 @@ static acpi_status acpi_run_osc(acpi_handle handle,
         union acpi_object in_params[4];
         struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
         union acpi_object *out_obj;
-        u32 osc_dw0, flags = osc_args->capbuf[OSC_QUERY_TYPE];
+        u32 errors, flags = osc_args->capbuf[OSC_QUERY_TYPE];
 
         /* Setting up input parameters */
         input.count = 4;
@@ -92,15 +92,16 @@ static acpi_status acpi_run_osc(acpi_handle handle,
                 status = AE_TYPE;
                 goto out_kfree;
         }
-        osc_dw0 = *((u32 *)out_obj->buffer.pointer);
-        if (osc_dw0) {
-                if (osc_dw0 & OSC_REQUEST_ERROR)
+        /* Need to ignore the bit0 in result code */
+        errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
+        if (errors) {
+                if (errors & OSC_REQUEST_ERROR)
                         printk(KERN_DEBUG "_OSC request fails\n"); 
-                if (osc_dw0 & OSC_INVALID_UUID_ERROR)
+                if (errors & OSC_INVALID_UUID_ERROR)
                         printk(KERN_DEBUG "_OSC invalid UUID\n"); 
-                if (osc_dw0 & OSC_INVALID_REVISION_ERROR)
+                if (errors & OSC_INVALID_REVISION_ERROR)
                         printk(KERN_DEBUG "_OSC invalid revision\n"); 
-                if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
+                if (errors & OSC_CAPABILITIES_MASK_ERROR) {
                         if (flags & OSC_QUERY_ENABLE)
                                 goto out_success;
                         printk(KERN_DEBUG "_OSC FW not grant req. control\n");
diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index dcce9f5d8465..4a110b7b2673 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -351,10 +351,11 @@ int verify_cis_cache(struct pcmcia_socket *s)
         char *buf;
 
         buf = kmalloc(256, GFP_KERNEL);
-        if (buf == NULL)
+        if (buf == NULL) {
                 dev_printk(KERN_WARNING, &s->dev,
                            "no memory for verifying CIS\n");
                 return -ENOMEM;
+        }
         list_for_each_entry(cis, &s->cis_cache, node) {
                 int len = cis->len;
 
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index c68c5d338285..0660ad182589 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -186,12 +186,6 @@ int pcmcia_register_socket(struct pcmcia_socket *socket)
 
         spin_lock_init(&socket->lock);
 
-        if (socket->resource_ops->init) {
-                ret = socket->resource_ops->init(socket);
-                if (ret)
-                        return (ret);
-        }
-
         /* try to obtain a socket number [yes, it gets ugly if we
          * register more than 2^sizeof(unsigned int) pcmcia
          * sockets... but the socket number is deprecated
@@ -226,7 +220,7 @@ int pcmcia_register_socket(struct pcmcia_socket *socket)
         /* set proper values in socket->dev */
         dev_set_drvdata(&socket->dev, socket);
         socket->dev.class = &pcmcia_socket_class;
-        snprintf(socket->dev.bus_id, BUS_ID_SIZE, "pcmcia_socket%u", socket->sock);
+        dev_set_name(&socket->dev, "pcmcia_socket%u", socket->sock);
 
         /* base address = 0, map = 0 */
         socket->cis_mem.flags = 0;
@@ -239,6 +233,12 @@ int pcmcia_register_socket(struct pcmcia_socket *socket)
         mutex_init(&socket->skt_mutex);
         spin_lock_init(&socket->thread_lock);
 
+        if (socket->resource_ops->init) {
+                ret = socket->resource_ops->init(socket);
+                if (ret)
+                        goto err;
+        }
+
         tsk = kthread_run(pccardd, socket, "pccardd");
         if (IS_ERR(tsk)) {
                 ret = PTR_ERR(tsk);
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 795660255490..47cab31ff6e4 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -622,7 +622,6 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f
 {
         struct pcmcia_device *p_dev, *tmp_dev;
         unsigned long flags;
-        int bus_id_len;
 
         s = pcmcia_get_socket(s);
         if (!s)
@@ -650,12 +649,12 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f
         /* by default don't allow DMA */
         p_dev->dma_mask = DMA_MASK_NONE;
         p_dev->dev.dma_mask = &p_dev->dma_mask;
-        bus_id_len = sprintf (p_dev->dev.bus_id, "%d.%d", p_dev->socket->sock, p_dev->device_no);
-
-        p_dev->devname = kmalloc(6 + bus_id_len + 1, GFP_KERNEL);
+        dev_set_name(&p_dev->dev, "%d.%d", p_dev->socket->sock, p_dev->device_no);
+        if (!dev_name(&p_dev->dev))
+                goto err_free;
+        p_dev->devname = kasprintf(GFP_KERNEL, "pcmcia%s", dev_name(&p_dev->dev));
         if (!p_dev->devname)
                 goto err_free;
-        sprintf (p_dev->devname, "pcmcia%s", p_dev->dev.bus_id);
         ds_dev_dbg(3, &p_dev->dev, "devname is %s\n", p_dev->devname);
 
         spin_lock_irqsave(&pcmcia_dev_list_lock, flags);
@@ -668,6 +667,8 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f
         list_for_each_entry(tmp_dev, &s->devices_list, socket_device_list)
                 if (p_dev->func == tmp_dev->func) {
                         p_dev->function_config = tmp_dev->function_config;
+                        p_dev->io = tmp_dev->io;
+                        p_dev->irq = tmp_dev->irq;
                         kref_get(&p_dev->function_config->ref);
                 }
 
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 76d4a98f0955..f5d0ba8e22d5 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -302,9 +302,10 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
         /* We only allow changing Vpp1 and Vpp2 to the same value */
         if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) &&
             (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
-                if (mod->Vpp1 != mod->Vpp2)
+                if (mod->Vpp1 != mod->Vpp2) {
                         ds_dbg(s, 0, "Vpp1 and Vpp2 must be the same\n");
                         return -EINVAL;
+                }
                 s->socket.Vpp = mod->Vpp1;
                 if (s->ops->set_socket(s, &s->socket)) {
                         dev_printk(KERN_WARNING, &s->dev,
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 17f4ecf1c0c5..9ca22c7aafb2 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -71,7 +71,7 @@ static DEFINE_MUTEX(rsrc_mutex);
 ======================================================================*/
 
 static struct resource *
-make_resource(resource_size_t b, resource_size_t n, int flags, char *name)
+make_resource(resource_size_t b, resource_size_t n, int flags, const char *name)
 {
         struct resource *res = kzalloc(sizeof(*res), GFP_KERNEL);
 
@@ -624,7 +624,7 @@ static int nonstatic_adjust_io_region(struct resource *res, unsigned long r_star
 static struct resource *nonstatic_find_io_region(unsigned long base, int num,
                    unsigned long align, struct pcmcia_socket *s)
 {
-        struct resource *res = make_resource(0, num, IORESOURCE_IO, s->dev.bus_id);
+        struct resource *res = make_resource(0, num, IORESOURCE_IO, dev_name(&s->dev));
         struct socket_data *s_data = s->resource_data;
         struct pcmcia_align_data data;
         unsigned long min = base;
@@ -658,7 +658,7 @@ static struct resource *nonstatic_find_io_region(unsigned long base, int num,
 static struct resource * nonstatic_find_mem_region(u_long base, u_long num,
                 u_long align, int low, struct pcmcia_socket *s)
 {
-        struct resource *res = make_resource(0, num, IORESOURCE_MEM, s->dev.bus_id);
+        struct resource *res = make_resource(0, num, IORESOURCE_MEM, dev_name(&s->dev));
         struct socket_data *s_data = s->resource_data;
         struct pcmcia_align_data data;
         unsigned long min, max;
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 4dada6ee1119..39360e2a4540 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1,6 +1,4 @@
-menu "Voltage and Current regulators"
-
-config REGULATOR
+menuconfig REGULATOR
         bool "Voltage and Current Regulator Support"
         default n
         help
@@ -23,21 +21,20 @@ config REGULATOR
 
           If unsure, say no.
 
+if REGULATOR
+
 config REGULATOR_DEBUG
         bool "Regulator debug support"
-        depends on REGULATOR
         help
           Say yes here to enable debugging support.
 
 config REGULATOR_FIXED_VOLTAGE
         tristate
         default n
-        select REGULATOR
 
 config REGULATOR_VIRTUAL_CONSUMER
         tristate "Virtual regulator consumer support"
         default n
-        select REGULATOR
         help
           This driver provides a virtual consumer for the voltage and
           current regulator API which provides sysfs controls for
@@ -49,7 +46,6 @@ config REGULATOR_VIRTUAL_CONSUMER
 config REGULATOR_BQ24022
         tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
         default n
-        select REGULATOR
         help
           This driver controls a TI bq24022 Charger attached via
           GPIOs. The provided current regulator can enable/disable
@@ -59,7 +55,6 @@ config REGULATOR_BQ24022
 config REGULATOR_WM8350
         tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC"
         depends on MFD_WM8350
-        select REGULATOR
         help
           This driver provides support for the voltage and current regulators
           of the WM8350 AudioPlus PMIC.
@@ -67,7 +62,6 @@ config REGULATOR_WM8350
 config REGULATOR_WM8400
         tristate "Wolfson Microelectroncis WM8400 AudioPlus PMIC"
         depends on MFD_WM8400
-        select REGULATOR
         help
           This driver provides support for the voltage regulators of the
           WM8400 AudioPlus PMIC.
@@ -75,9 +69,8 @@ config REGULATOR_WM8400
 config REGULATOR_DA903X
         tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC"
         depends on PMIC_DA903X
-        select REGULATOR
         help
           Say y here to support the BUCKs and LDOs regulators found on
           Dialog Semiconductor DA9030/DA9034 PMIC.
 
-endmenu
+endif
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 8abbb2020af9..123092d8a984 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -277,6 +277,14 @@ config RTC_DRV_FM3130
           This driver can also be built as a module. If so the module
           will be called rtc-fm3130.
 
+config RTC_DRV_RX8581
+        tristate "Epson RX-8581"
+        help
+          If you say yes here you will get support for the Epson RX-8581.
+
+          This driver can also be built as a module. If so the module
+          will be called rtc-rx8581.
+
 endif # I2C
 
 comment "SPI RTC drivers"
@@ -302,6 +310,17 @@ config RTC_DRV_DS1305
           This driver can also be built as a module. If so, the module
           will be called rtc-ds1305.
 
+config RTC_DRV_DS1390
+        tristate "Dallas/Maxim DS1390/93/94"
+        help
+          If you say yes here you get support for the DS1390/93/94 chips.
+
+          This driver only supports the RTC feature, and not other chip
+          features such as alarms and trickle charging.
+
+          This driver can also be built as a module. If so, the module
+          will be called rtc-ds1390.
+
 config RTC_DRV_MAX6902
         tristate "Maxim MAX6902"
         help
@@ -468,6 +487,16 @@ config RTC_DRV_V3020
           This driver can also be built as a module. If so, the module
           will be called rtc-v3020.
 
+config RTC_DRV_WM8350
+        tristate "Wolfson Microelectronics WM8350 RTC"
+        depends on MFD_WM8350
+        help
+          If you say yes here you will get support for the RTC subsystem
+          of the Wolfson Microelectronics WM8350.
+
+          This driver can also be built as a module. If so, the module
+          will be called "rtc-wm8350".
+
 comment "on-CPU RTC drivers"
 
 config RTC_DRV_OMAP
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index e9e8474cc8fe..6e79c912bf9e 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_RTC_DRV_DS1302)	+= rtc-ds1302.o
 obj-$(CONFIG_RTC_DRV_DS1305)    += rtc-ds1305.o
 obj-$(CONFIG_RTC_DRV_DS1307)    += rtc-ds1307.o
 obj-$(CONFIG_RTC_DRV_DS1374)    += rtc-ds1374.o
+obj-$(CONFIG_RTC_DRV_DS1390)    += rtc-ds1390.o
 obj-$(CONFIG_RTC_DRV_DS1511)    += rtc-ds1511.o
 obj-$(CONFIG_RTC_DRV_DS1553)    += rtc-ds1553.o
 obj-$(CONFIG_RTC_DRV_DS1672)    += rtc-ds1672.o
@@ -57,6 +58,7 @@ obj-$(CONFIG_RTC_DRV_R9701)	+= rtc-r9701.o
 obj-$(CONFIG_RTC_DRV_RS5C313)   += rtc-rs5c313.o
 obj-$(CONFIG_RTC_DRV_RS5C348)   += rtc-rs5c348.o
 obj-$(CONFIG_RTC_DRV_RS5C372)   += rtc-rs5c372.o
+obj-$(CONFIG_RTC_DRV_RX8581)    += rtc-rx8581.o
 obj-$(CONFIG_RTC_DRV_S35390A)   += rtc-s35390a.o
 obj-$(CONFIG_RTC_DRV_S3C)       += rtc-s3c.o
 obj-$(CONFIG_RTC_DRV_SA1100)    += rtc-sa1100.o
@@ -66,4 +68,5 @@ obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
 obj-$(CONFIG_RTC_DRV_TWL4030)   += rtc-twl4030.o
 obj-$(CONFIG_RTC_DRV_V3020)     += rtc-v3020.o
 obj-$(CONFIG_RTC_DRV_VR41XX)    += rtc-vr41xx.o
+obj-$(CONFIG_RTC_DRV_WM8350)    += rtc-wm8350.o
 obj-$(CONFIG_RTC_DRV_X1205)     += rtc-x1205.o
diff --git a/drivers/rtc/rtc-ds1390.c b/drivers/rtc/rtc-ds1390.c
new file mode 100644
index 000000000000..599e976bf014
--- /dev/null
+++ b/drivers/rtc/rtc-ds1390.c
@@ -0,0 +1,220 @@
+/*
+ * rtc-ds1390.c -- driver for DS1390/93/94
+ *
+ * Copyright (C) 2008 Mercury IMC Ltd
+ * Written by Mark Jackson <mpfj@mimc.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * NOTE : Currently this driver only supports the bare minimum for read
+ * and write the RTC.  The extra features provided by the chip family
+ * (alarms, trickle charger, different control registers) are unavailable.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+
+#define DS1390_REG_100THS               0x00
+#define DS1390_REG_SECONDS              0x01
+#define DS1390_REG_MINUTES              0x02
+#define DS1390_REG_HOURS                0x03
+#define DS1390_REG_DAY                  0x04
+#define DS1390_REG_DATE                 0x05
+#define DS1390_REG_MONTH_CENT           0x06
+#define DS1390_REG_YEAR                 0x07
+
+#define DS1390_REG_ALARM_100THS         0x08
+#define DS1390_REG_ALARM_SECONDS        0x09
+#define DS1390_REG_ALARM_MINUTES        0x0A
+#define DS1390_REG_ALARM_HOURS          0x0B
+#define DS1390_REG_ALARM_DAY_DATE       0x0C
+
+#define DS1390_REG_CONTROL              0x0D
+#define DS1390_REG_STATUS               0x0E
+#define DS1390_REG_TRICKLE              0x0F
+
+struct ds1390 {
+        struct rtc_device *rtc;
+        u8 txrx_buf[9]; /* cmd + 8 registers */
+};
+
+static void ds1390_set_reg(struct device *dev, unsigned char address,
+                                unsigned char data)
+{
+        struct spi_device *spi = to_spi_device(dev);
+        struct ds1390 *chip = dev_get_drvdata(dev);
+
+        /* Set MSB to indicate write */
+        chip->txrx_buf[0] = address | 0x80;
+        chip->txrx_buf[1] = data;
+
+        /* do the i/o */
+        spi_write_then_read(spi, chip->txrx_buf, 2, NULL, 0);
+}
+
+static int ds1390_get_reg(struct device *dev, unsigned char address,
+                                unsigned char *data)
+{
+        struct spi_device *spi = to_spi_device(dev);
+        struct ds1390 *chip = dev_get_drvdata(dev);
+        int status;
+
+        if (!data)
+                return -EINVAL;
+
+        /* Clear MSB to indicate read */
+        chip->txrx_buf[0] = address & 0x7f;
+        /* do the i/o */
+        status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 1);
+        if (status != 0)
+                return status;
+
+        *data = chip->txrx_buf[1];
+
+        return 0;
+}
+
+static int ds1390_get_datetime(struct device *dev, struct rtc_time *dt)
+{
+        struct spi_device *spi = to_spi_device(dev);
+        struct ds1390 *chip = dev_get_drvdata(dev);
+        int status;
+
+        /* build the message */
+        chip->txrx_buf[0] = DS1390_REG_SECONDS;
+
+        /* do the i/o */
+        status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 8);
+        if (status != 0)
+                return status;
+
+        /* The chip sends data in this order:
+         * Seconds, Minutes, Hours, Day, Date, Month / Century, Year */
+        dt->tm_sec      = bcd2bin(chip->txrx_buf[0]);
+        dt->tm_min      = bcd2bin(chip->txrx_buf[1]);
+        dt->tm_hour     = bcd2bin(chip->txrx_buf[2]);
+        dt->tm_wday     = bcd2bin(chip->txrx_buf[3]);
+        dt->tm_mday     = bcd2bin(chip->txrx_buf[4]);
+        /* mask off century bit */
+        dt->tm_mon      = bcd2bin(chip->txrx_buf[5] & 0x7f) - 1;
+        /* adjust for century bit */
+        dt->tm_year = bcd2bin(chip->txrx_buf[6]) + ((chip->txrx_buf[5] & 0x80) ? 100 : 0);
+
+        return rtc_valid_tm(dt);
+}
+
+static int ds1390_set_datetime(struct device *dev, struct rtc_time *dt)
+{
+        struct spi_device *spi = to_spi_device(dev);
+        struct ds1390 *chip = dev_get_drvdata(dev);
+
+        /* build the message */
+        chip->txrx_buf[0] = DS1390_REG_SECONDS | 0x80;
+        chip->txrx_buf[1] = bin2bcd(dt->tm_sec);
+        chip->txrx_buf[2] = bin2bcd(dt->tm_min);
+        chip->txrx_buf[3] = bin2bcd(dt->tm_hour);
+        chip->txrx_buf[4] = bin2bcd(dt->tm_wday);
+        chip->txrx_buf[5] = bin2bcd(dt->tm_mday);
+        chip->txrx_buf[6] = bin2bcd(dt->tm_mon + 1) |
+                                ((dt->tm_year > 99) ? 0x80 : 0x00);
+        chip->txrx_buf[7] = bin2bcd(dt->tm_year % 100);
+
+        /* do the i/o */
+        return spi_write_then_read(spi, chip->txrx_buf, 8, NULL, 0);
+}
+
+static int ds1390_read_time(struct device *dev, struct rtc_time *tm)
+{
+        return ds1390_get_datetime(dev, tm);
+}
+
+static int ds1390_set_time(struct device *dev, struct rtc_time *tm)
+{
+        return ds1390_set_datetime(dev, tm);
+}
+
+static const struct rtc_class_ops ds1390_rtc_ops = {
+        .read_time      = ds1390_read_time,
+        .set_time       = ds1390_set_time,
+};
+
+static int __devinit ds1390_probe(struct spi_device *spi)
+{
+        struct rtc_device *rtc;
+        unsigned char tmp;
+        struct ds1390 *chip;
+        int res;
+
+        printk(KERN_DEBUG "DS1390 SPI RTC driver\n");
+
+        rtc = rtc_device_register("ds1390",
+                                &spi->dev, &ds1390_rtc_ops, THIS_MODULE);
+        if (IS_ERR(rtc)) {
+                printk(KERN_ALERT "RTC : unable to register device\n");
+                return PTR_ERR(rtc);
+        }
+
+        spi->mode = SPI_MODE_3;
+        spi->bits_per_word = 8;
+        spi_setup(spi);
+
+        chip = kzalloc(sizeof *chip, GFP_KERNEL);
+        if (!chip) {
+                printk(KERN_ALERT "RTC : unable to allocate device memory\n");
+                rtc_device_unregister(rtc);
+                return -ENOMEM;
+        }
+        chip->rtc = rtc;
+        dev_set_drvdata(&spi->dev, chip);
+
+        res = ds1390_get_reg(&spi->dev, DS1390_REG_SECONDS, &tmp);
+        if (res) {
+                printk(KERN_ALERT "RTC : unable to read device\n");
+                rtc_device_unregister(rtc);
+                return res;
+        }
+
+        return 0;
+}
+
+static int __devexit ds1390_remove(struct spi_device *spi)
+{
+        struct ds1390 *chip = platform_get_drvdata(spi);
+        struct rtc_device *rtc = chip->rtc;
+
+        if (rtc)
+                rtc_device_unregister(rtc);
+
+        kfree(chip);
+
+        return 0;
+}
+
+static struct spi_driver ds1390_driver = {
+        .driver = {
+                .name   = "rtc-ds1390",
+                .owner  = THIS_MODULE,
+        },
+        .probe  = ds1390_probe,
+        .remove = __devexit_p(ds1390_remove),
+};
+
+static __init int ds1390_init(void)
+{
+        return spi_register_driver(&ds1390_driver);
+}
+module_init(ds1390_init);
+
+static __exit void ds1390_exit(void)
+{
+        spi_unregister_driver(&ds1390_driver);
+}
+module_exit(ds1390_exit);
+
+MODULE_DESCRIPTION("DS1390/93/94 SPI RTC driver");
+MODULE_AUTHOR("Mark Jackson <mpfj@mimc.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c
new file mode 100644
index 000000000000..c9522f3bc21c
--- /dev/null
+++ b/drivers/rtc/rtc-rx8581.c
@@ -0,0 +1,281 @@
+/*
+ * An I2C driver for the Epson RX8581 RTC
+ *
+ * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC)
+ * Copyright 2005-06 Tower Technologies
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/log2.h>
+
+#define DRV_VERSION "0.1"
+
+#define RX8581_REG_SC           0x00 /* Second in BCD */
+#define RX8581_REG_MN           0x01 /* Minute in BCD */
+#define RX8581_REG_HR           0x02 /* Hour in BCD */
+#define RX8581_REG_DW           0x03 /* Day of Week */
+#define RX8581_REG_DM           0x04 /* Day of Month in BCD */
+#define RX8581_REG_MO           0x05 /* Month in BCD */
+#define RX8581_REG_YR           0x06 /* Year in BCD */
+#define RX8581_REG_RAM          0x07 /* RAM */
+#define RX8581_REG_AMN          0x08 /* Alarm Min in BCD*/
+#define RX8581_REG_AHR          0x09 /* Alarm Hour in BCD */
+#define RX8581_REG_ADM          0x0A
+#define RX8581_REG_ADW          0x0A
+#define RX8581_REG_TMR0         0x0B
+#define RX8581_REG_TMR1         0x0C
+#define RX8581_REG_EXT          0x0D /* Extension Register */
+#define RX8581_REG_FLAG         0x0E /* Flag Register */
+#define RX8581_REG_CTRL         0x0F /* Control Register */
+
+
+/* Flag Register bit definitions */
+#define RX8581_FLAG_UF          0x20 /* Update */
+#define RX8581_FLAG_TF          0x10 /* Timer */
+#define RX8581_FLAG_AF          0x08 /* Alarm */
+#define RX8581_FLAG_VLF         0x02 /* Voltage Low */
+
+/* Control Register bit definitions */
+#define RX8581_CTRL_UIE         0x20 /* Update Interrupt Enable */
+#define RX8581_CTRL_TIE         0x10 /* Timer Interrupt Enable */
+#define RX8581_CTRL_AIE         0x08 /* Alarm Interrupt Enable */
+#define RX8581_CTRL_STOP        0x02 /* STOP bit */
+#define RX8581_CTRL_RESET       0x01 /* RESET bit */
+
+static struct i2c_driver rx8581_driver;
+
+/*
+ * In the routines that deal directly with the rx8581 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
+ */
+static int rx8581_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+        unsigned char date[7];
+        int data, err;
+
+        /* First we ensure that the "update flag" is not set, we read the
+         * time and date then re-read the "update flag". If the update flag
+         * has been set, we know that the time has changed during the read so
+         * we repeat the whole process again.
+         */
+        data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
+        if (data < 0) {
+                dev_err(&client->dev, "Unable to read device flags\n");
+                return -EIO;
+        }
+
+        do {
+                /* If update flag set, clear it */
+                if (data & RX8581_FLAG_UF) {
+                        err = i2c_smbus_write_byte_data(client,
+                                RX8581_REG_FLAG, (data & ~RX8581_FLAG_UF));
+                        if (err != 0) {
+                                dev_err(&client->dev, "Unable to write device "
+                                        "flags\n");
+                                return -EIO;
+                        }
+                }
+
+                /* Now read time and date */
+                err = i2c_smbus_read_i2c_block_data(client, RX8581_REG_SC,
+                        7, date);
+                if (err < 0) {
+                        dev_err(&client->dev, "Unable to read date\n");
+                        return -EIO;
+                }
+
+                /* Check flag register */
+                data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
+                if (data < 0) {
+                        dev_err(&client->dev, "Unable to read device flags\n");
+                        return -EIO;
+                }
+        } while (data & RX8581_FLAG_UF);
+
+        if (data & RX8581_FLAG_VLF)
+                dev_info(&client->dev,
+                        "low voltage detected, date/time is not reliable.\n");
+
+        dev_dbg(&client->dev,
+                "%s: raw data is sec=%02x, min=%02x, hr=%02x, "
+                "wday=%02x, mday=%02x, mon=%02x, year=%02x\n",
+                __func__,
+                date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
+
+        tm->tm_sec = bcd2bin(date[RX8581_REG_SC] & 0x7F);
+        tm->tm_min = bcd2bin(date[RX8581_REG_MN] & 0x7F);
+        tm->tm_hour = bcd2bin(date[RX8581_REG_HR] & 0x3F); /* rtc hr 0-23 */
+        tm->tm_wday = ilog2(date[RX8581_REG_DW] & 0x7F);
+        tm->tm_mday = bcd2bin(date[RX8581_REG_DM] & 0x3F);
+        tm->tm_mon = bcd2bin(date[RX8581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
+        tm->tm_year = bcd2bin(date[RX8581_REG_YR]);
+        if (tm->tm_year < 70)
+                tm->tm_year += 100;     /* assume we are in 1970...2069 */
+
+
+        dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+                "mday=%d, mon=%d, year=%d, wday=%d\n",
+                __func__,
+                tm->tm_sec, tm->tm_min, tm->tm_hour,
+                tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+        err = rtc_valid_tm(tm);
+        if (err < 0)
+                dev_err(&client->dev, "retrieved date/time is not valid.\n");
+
+        return err;
+}
+
+static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+        int data, err;
+        unsigned char buf[7];
+
+        dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+                "mday=%d, mon=%d, year=%d, wday=%d\n",
+                __func__,
+                tm->tm_sec, tm->tm_min, tm->tm_hour,
+                tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+        /* hours, minutes and seconds */
+        buf[RX8581_REG_SC] = bin2bcd(tm->tm_sec);
+        buf[RX8581_REG_MN] = bin2bcd(tm->tm_min);
+        buf[RX8581_REG_HR] = bin2bcd(tm->tm_hour);
+
+        buf[RX8581_REG_DM] = bin2bcd(tm->tm_mday);
+
+        /* month, 1 - 12 */
+        buf[RX8581_REG_MO] = bin2bcd(tm->tm_mon + 1);
+
+        /* year and century */
+        buf[RX8581_REG_YR] = bin2bcd(tm->tm_year % 100);
+        buf[RX8581_REG_DW] = (0x1 << tm->tm_wday);
+
+        /* Stop the clock */
+        data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
+        if (data < 0) {
+                dev_err(&client->dev, "Unable to read control register\n");
+                return -EIO;
+        }
+
+        err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
+                (data | RX8581_CTRL_STOP));
+        if (err < 0) {
+                dev_err(&client->dev, "Unable to write control register\n");
+                return -EIO;
+        }
+
+        /* write register's data */
+        err = i2c_smbus_write_i2c_block_data(client, RX8581_REG_SC, 7, buf);
+        if (err < 0) {
+                dev_err(&client->dev, "Unable to write to date registers\n");
+                return -EIO;
+        }
+
+        /* Restart the clock */
+        data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
+        if (data < 0) {
+                dev_err(&client->dev, "Unable to read control register\n");
+                return -EIO;
+        }
+
+        err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
+                (data | ~(RX8581_CTRL_STOP)));
+        if (err != 0) {
+                dev_err(&client->dev, "Unable to write control register\n");
+                return -EIO;
+        }
+
+        return 0;
+}
+
+static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+        return rx8581_get_datetime(to_i2c_client(dev), tm);
+}
+
+static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+        return rx8581_set_datetime(to_i2c_client(dev), tm);
+}
+
+static const struct rtc_class_ops rx8581_rtc_ops = {
+        .read_time      = rx8581_rtc_read_time,
+        .set_time       = rx8581_rtc_set_time,
+};
+
+static int __devinit rx8581_probe(struct i2c_client *client,
+                                const struct i2c_device_id *id)
+{
+        struct rtc_device *rtc;
+
+        dev_dbg(&client->dev, "%s\n", __func__);
+
+        if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+                return -ENODEV;
+
+        dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
+
+        rtc = rtc_device_register(rx8581_driver.driver.name,
+                                &client->dev, &rx8581_rtc_ops, THIS_MODULE);
+
+        if (IS_ERR(rtc))
+                return PTR_ERR(rtc);
+
+        i2c_set_clientdata(client, rtc);
+
+        return 0;
+}
+
+static int __devexit rx8581_remove(struct i2c_client *client)
+{
+        struct rtc_device *rtc = i2c_get_clientdata(client);
+
+        rtc_device_unregister(rtc);
+
+        return 0;
+}
+
+static const struct i2c_device_id rx8581_id[] = {
+        { "rx8581", 0 },
+        { }
+};
+MODULE_DEVICE_TABLE(i2c, rx8581_id);
+
+static struct i2c_driver rx8581_driver = {
+        .driver         = {
+                .name   = "rtc-rx8581",
+                .owner  = THIS_MODULE,
+        },
+        .probe          = rx8581_probe,
+        .remove         = __devexit_p(rx8581_remove),
+        .id_table       = rx8581_id,
+};
+
+static int __init rx8581_init(void)
+{
+        return i2c_add_driver(&rx8581_driver);
+}
+
+static void __exit rx8581_exit(void)
+{
+        i2c_del_driver(&rx8581_driver);
+}
+
+MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com>");
+MODULE_DESCRIPTION("Epson RX-8581 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_init(rx8581_init);
+module_exit(rx8581_exit);
diff --git a/drivers/rtc/rtc-sun4v.c b/drivers/rtc/rtc-sun4v.c
index 2012ccbb4a53..5b2261052a65 100644
--- a/drivers/rtc/rtc-sun4v.c
+++ b/drivers/rtc/rtc-sun4v.c
@@ -1,4 +1,4 @@
-/* rtc-sun4c.c: Hypervisor based RTC for SUN4V systems.
+/* rtc-sun4v.c: Hypervisor based RTC for SUN4V systems.
  *
  * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
  */
@@ -7,21 +7,11 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/time.h>
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
 
 #include <asm/hypervisor.h>
 
-MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
-MODULE_DESCRIPTION("SUN4V RTC driver");
-MODULE_LICENSE("GPL");
-
-struct sun4v_rtc {
-        struct rtc_device       *rtc;
-        spinlock_t              lock;
-};
-
 static unsigned long hypervisor_get_time(void)
 {
         unsigned long ret, time;
@@ -45,15 +35,7 @@ retry:
 
 static int sun4v_read_time(struct device *dev, struct rtc_time *tm)
 {
-        struct sun4v_rtc *p = dev_get_drvdata(dev);
-        unsigned long flags, secs;
-
-        spin_lock_irqsave(&p->lock, flags);
-        secs = hypervisor_get_time();
-        spin_unlock_irqrestore(&p->lock, flags);
-
-        rtc_time_to_tm(secs, tm);
-
+        rtc_time_to_tm(hypervisor_get_time(), tm);
         return 0;
 }
 
@@ -80,19 +62,14 @@ retry:
 
 static int sun4v_set_time(struct device *dev, struct rtc_time *tm)
 {
-        struct sun4v_rtc *p = dev_get_drvdata(dev);
-        unsigned long flags, secs;
+        unsigned long secs;
         int err;
 
         err = rtc_tm_to_time(tm, &secs);
         if (err)
                 return err;
 
-        spin_lock_irqsave(&p->lock, flags);
-        err = hypervisor_set_time(secs);
-        spin_unlock_irqrestore(&p->lock, flags);
-
-        return err;
+        return hypervisor_set_time(secs);
 }
 
 static const struct rtc_class_ops sun4v_rtc_ops = {
@@ -100,33 +77,22 @@ static const struct rtc_class_ops sun4v_rtc_ops = {
         .set_time       = sun4v_set_time,
 };
 
-static int __devinit sun4v_rtc_probe(struct platform_device *pdev)
+static int __init sun4v_rtc_probe(struct platform_device *pdev)
 {
-        struct sun4v_rtc *p = kzalloc(sizeof(*p), GFP_KERNEL);
-
-        if (!p)
-                return -ENOMEM;
-
-        spin_lock_init(&p->lock);
-
-        p->rtc = rtc_device_register("sun4v", &pdev->dev,
+        struct rtc_device *rtc = rtc_device_register("sun4v", &pdev->dev,
                                      &sun4v_rtc_ops, THIS_MODULE);
-        if (IS_ERR(p->rtc)) {
-                int err = PTR_ERR(p->rtc);
-                kfree(p);
-                return err;
-        }
-        platform_set_drvdata(pdev, p);
+        if (IS_ERR(rtc))
+                return PTR_ERR(rtc);
+
+        platform_set_drvdata(pdev, rtc);
         return 0;
 }
 
-static int __devexit sun4v_rtc_remove(struct platform_device *pdev)
+static int __exit sun4v_rtc_remove(struct platform_device *pdev)
 {
-        struct sun4v_rtc *p = platform_get_drvdata(pdev);
-
-        rtc_device_unregister(p->rtc);
-        kfree(p);
+        struct rtc_device *rtc = platform_get_drvdata(pdev);
 
+        rtc_device_unregister(rtc);
         return 0;
 }
 
@@ -135,13 +101,12 @@ static struct platform_driver sun4v_rtc_driver = {
                 .name   = "rtc-sun4v",
                 .owner  = THIS_MODULE,
         },
-        .probe          = sun4v_rtc_probe,
-        .remove         = __devexit_p(sun4v_rtc_remove),
+        .remove         = __exit_p(sun4v_rtc_remove),
 };
 
 static int __init sun4v_rtc_init(void)
 {
-        return platform_driver_register(&sun4v_rtc_driver);
+        return platform_driver_probe(&sun4v_rtc_driver, sun4v_rtc_probe);
 }
 
 static void __exit sun4v_rtc_exit(void)
@@ -151,3 +116,7 @@ static void __exit sun4v_rtc_exit(void)
 
 module_init(sun4v_rtc_init);
 module_exit(sun4v_rtc_exit);
+
+MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
+MODULE_DESCRIPTION("SUN4V RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c
new file mode 100644
index 000000000000..5c5e3aa91385
--- /dev/null
+++ b/drivers/rtc/rtc-wm8350.c
@@ -0,0 +1,514 @@
+/*
+ *      Real Time Clock driver for Wolfson Microelectronics WM8350
+ *
+ *      Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ *  Author: Liam Girdwood
+ *          linux@wolfsonmicro.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/completion.h>
+#include <linux/mfd/wm8350/rtc.h>
+#include <linux/mfd/wm8350/core.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#define WM8350_SET_ALM_RETRIES  5
+#define WM8350_SET_TIME_RETRIES 5
+#define WM8350_GET_TIME_RETRIES 5
+
+#define to_wm8350_from_rtc_dev(d) container_of(d, struct wm8350, rtc.pdev.dev)
+
+/*
+ * Read current time and date in RTC
+ */
+static int wm8350_rtc_readtime(struct device *dev, struct rtc_time *tm)
+{
+        struct wm8350 *wm8350 = dev_get_drvdata(dev);
+        u16 time1[4], time2[4];
+        int retries = WM8350_GET_TIME_RETRIES, ret;
+
+        /*
+         * Read the time twice and compare.
+         * If time1 == time2, then time is valid else retry.
+         */
+        do {
+                ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES,
+                                        4, time1);
+                if (ret < 0)
+                        return ret;
+                ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES,
+                                        4, time2);
+                if (ret < 0)
+                        return ret;
+
+                if (memcmp(time1, time2, sizeof(time1)) == 0) {
+                        tm->tm_sec = time1[0] & WM8350_RTC_SECS_MASK;
+
+                        tm->tm_min = (time1[0] & WM8350_RTC_MINS_MASK)
+                            >> WM8350_RTC_MINS_SHIFT;
+
+                        tm->tm_hour = time1[1] & WM8350_RTC_HRS_MASK;
+
+                        tm->tm_wday = ((time1[1] >> WM8350_RTC_DAY_SHIFT)
+                                       & 0x7) - 1;
+
+                        tm->tm_mon = ((time1[2] & WM8350_RTC_MTH_MASK)
+                                      >> WM8350_RTC_MTH_SHIFT) - 1;
+
+                        tm->tm_mday = (time1[2] & WM8350_RTC_DATE_MASK);
+
+                        tm->tm_year = ((time1[3] & WM8350_RTC_YHUNDREDS_MASK)
+                                       >> WM8350_RTC_YHUNDREDS_SHIFT) * 100;
+                        tm->tm_year += time1[3] & WM8350_RTC_YUNITS_MASK;
+
+                        tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon,
+                                                    tm->tm_year);
+                        tm->tm_year -= 1900;
+
+                        dev_dbg(dev, "Read (%d left): %04x %04x %04x %04x\n",
+                                retries,
+                                time1[0], time1[1], time1[2], time1[3]);
+
+                        return 0;
+                }
+        } while (retries--);
+
+        dev_err(dev, "timed out reading RTC time\n");
+        return -EIO;
+}
+
+/*
+ * Set current time and date in RTC
+ */
+static int wm8350_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+        struct wm8350 *wm8350 = dev_get_drvdata(dev);
+        u16 time[4];
+        u16 rtc_ctrl;
+        int ret, retries = WM8350_SET_TIME_RETRIES;
+
+        time[0] = tm->tm_sec;
+        time[0] |= tm->tm_min << WM8350_RTC_MINS_SHIFT;
+        time[1] = tm->tm_hour;
+        time[1] |= (tm->tm_wday + 1) << WM8350_RTC_DAY_SHIFT;
+        time[2] = tm->tm_mday;
+        time[2] |= (tm->tm_mon + 1) << WM8350_RTC_MTH_SHIFT;
+        time[3] = ((tm->tm_year + 1900) / 100) << WM8350_RTC_YHUNDREDS_SHIFT;
+        time[3] |= (tm->tm_year + 1900) % 100;
+
+        dev_dbg(dev, "Setting: %04x %04x %04x %04x\n",
+                time[0], time[1], time[2], time[3]);
+
+        /* Set RTC_SET to stop the clock */
+        ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, WM8350_RTC_SET);
+        if (ret < 0)
+                return ret;
+
+        /* Wait until confirmation of stopping */
+        do {
+                rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+                schedule_timeout_uninterruptible(msecs_to_jiffies(1));
+        } while (retries-- && !(rtc_ctrl & WM8350_RTC_STS));
+
+        if (!retries) {
+                dev_err(dev, "timed out on set confirmation\n");
+                return -EIO;
+        }
+
+        /* Write time to RTC */
+        ret = wm8350_block_write(wm8350, WM8350_RTC_SECONDS_MINUTES, 4, time);
+        if (ret < 0)
+                return ret;
+
+        /* Clear RTC_SET to start the clock */
+        ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+                                WM8350_RTC_SET);
+        return ret;
+}
+
+/*
+ * Read alarm time and date in RTC
+ */
+static int wm8350_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+        struct wm8350 *wm8350 = dev_get_drvdata(dev);
+        struct rtc_time *tm = &alrm->time;
+        u16 time[4];
+        int ret;
+
+        ret = wm8350_block_read(wm8350, WM8350_ALARM_SECONDS_MINUTES, 4, time);
+        if (ret < 0)
+                return ret;
+
+        tm->tm_sec = time[0] & WM8350_RTC_ALMSECS_MASK;
+        if (tm->tm_sec == WM8350_RTC_ALMSECS_MASK)
+                tm->tm_sec = -1;
+
+        tm->tm_min = time[0] & WM8350_RTC_ALMMINS_MASK;
+        if (tm->tm_min == WM8350_RTC_ALMMINS_MASK)
+                tm->tm_min = -1;
+        else
+                tm->tm_min >>= WM8350_RTC_ALMMINS_SHIFT;
+
+        tm->tm_hour = time[1] & WM8350_RTC_ALMHRS_MASK;
+        if (tm->tm_hour == WM8350_RTC_ALMHRS_MASK)
+                tm->tm_hour = -1;
+
+        tm->tm_wday = ((time[1] >> WM8350_RTC_ALMDAY_SHIFT) & 0x7) - 1;
+        if (tm->tm_wday > 7)
+                tm->tm_wday = -1;
+
+        tm->tm_mon = time[2] & WM8350_RTC_ALMMTH_MASK;
+        if (tm->tm_mon == WM8350_RTC_ALMMTH_MASK)
+                tm->tm_mon = -1;
+        else
+                tm->tm_mon = (tm->tm_mon >> WM8350_RTC_ALMMTH_SHIFT) - 1;
+
+        tm->tm_mday = (time[2] & WM8350_RTC_ALMDATE_MASK);
+        if (tm->tm_mday == WM8350_RTC_ALMDATE_MASK)
+                tm->tm_mday = -1;
+
+        tm->tm_year = -1;
+
+        alrm->enabled = !(time[3] & WM8350_RTC_ALMSTS);
+
+        return 0;
+}
+
+static int wm8350_rtc_stop_alarm(struct wm8350 *wm8350)
+{
+        int retries = WM8350_SET_ALM_RETRIES;
+        u16 rtc_ctrl;
+        int ret;
+
+        /* Set RTC_SET to stop the clock */
+        ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+                              WM8350_RTC_ALMSET);
+        if (ret < 0)
+                return ret;
+
+        /* Wait until confirmation of stopping */
+        do {
+                rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+                schedule_timeout_uninterruptible(msecs_to_jiffies(1));
+        } while (retries-- && !(rtc_ctrl & WM8350_RTC_ALMSTS));
+
+        if (!(rtc_ctrl & WM8350_RTC_ALMSTS))
+                return -ETIMEDOUT;
+
+        return 0;
+}
+
+static int wm8350_rtc_start_alarm(struct wm8350 *wm8350)
+{
+        int ret;
+        int retries = WM8350_SET_ALM_RETRIES;
+        u16 rtc_ctrl;
+
+        ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+                                WM8350_RTC_ALMSET);
+        if (ret < 0)
+                return ret;
+
+        /* Wait until confirmation */
+        do {
+                rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+                schedule_timeout_uninterruptible(msecs_to_jiffies(1));
+        } while (retries-- && rtc_ctrl & WM8350_RTC_ALMSTS);
+
+        if (rtc_ctrl & WM8350_RTC_ALMSTS)
+                return -ETIMEDOUT;
+
+        return 0;
+}
+
+static int wm8350_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+        struct wm8350 *wm8350 = dev_get_drvdata(dev);
+        struct rtc_time *tm = &alrm->time;
+        u16 time[3];
+        int ret;
+
+        memset(time, 0, sizeof(time));
+
+        if (tm->tm_sec != -1)
+                time[0] |= tm->tm_sec;
+        else
+                time[0] |= WM8350_RTC_ALMSECS_MASK;
+
+        if (tm->tm_min != -1)
+                time[0] |= tm->tm_min << WM8350_RTC_ALMMINS_SHIFT;
+        else
+                time[0] |= WM8350_RTC_ALMMINS_MASK;
+
+        if (tm->tm_hour != -1)
+                time[1] |= tm->tm_hour;
+        else
+                time[1] |= WM8350_RTC_ALMHRS_MASK;
+
+        if (tm->tm_wday != -1)
+                time[1] |= (tm->tm_wday + 1) << WM8350_RTC_ALMDAY_SHIFT;
+        else
+                time[1] |= WM8350_RTC_ALMDAY_MASK;
+
+        if (tm->tm_mday != -1)
+                time[2] |= tm->tm_mday;
+        else
+                time[2] |= WM8350_RTC_ALMDATE_MASK;
+
+        if (tm->tm_mon != -1)
+                time[2] |= (tm->tm_mon + 1) << WM8350_RTC_ALMMTH_SHIFT;
+        else
+                time[2] |= WM8350_RTC_ALMMTH_MASK;
+
+        ret = wm8350_rtc_stop_alarm(wm8350);
+        if (ret < 0)
+                return ret;
+
+        /* Write time to RTC */
+        ret = wm8350_block_write(wm8350, WM8350_ALARM_SECONDS_MINUTES,
+                                 3, time);
+        if (ret < 0)
+                return ret;
+
+        if (alrm->enabled)
+                ret = wm8350_rtc_start_alarm(wm8350);
+
+        return ret;
+}
+
+/*
+ * Handle commands from user-space
+ */
+static int wm8350_rtc_ioctl(struct device *dev, unsigned int cmd,
+                            unsigned long arg)
+{
+        struct wm8350 *wm8350 = dev_get_drvdata(dev);
+
+        switch (cmd) {
+        case RTC_AIE_OFF:
+                return wm8350_rtc_stop_alarm(wm8350);
+        case RTC_AIE_ON:
+                return wm8350_rtc_start_alarm(wm8350);
+
+        case RTC_UIE_OFF:
+                wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC);
+                break;
+        case RTC_UIE_ON:
+                wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_SEC);
+                break;
+
+        default:
+                return -ENOIOCTLCMD;
+        }
+
+        return 0;
+}
+
+static void wm8350_rtc_alarm_handler(struct wm8350 *wm8350, int irq,
+                                     void *data)
+{
+        struct rtc_device *rtc = wm8350->rtc.rtc;
+        int ret;
+
+        rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+
+        /* Make it one shot */
+        ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+                              WM8350_RTC_ALMSET);
+        if (ret != 0) {
+                dev_err(&(wm8350->rtc.pdev->dev),
+                        "Failed to disable alarm: %d\n", ret);
+        }
+}
+
+static void wm8350_rtc_update_handler(struct wm8350 *wm8350, int irq,
+                                      void *data)
+{
+        struct rtc_device *rtc = wm8350->rtc.rtc;
+
+        rtc_update_irq(rtc, 1, RTC_IRQF | RTC_UF);
+}
+
+static const struct rtc_class_ops wm8350_rtc_ops = {
+        .ioctl = wm8350_rtc_ioctl,
+        .read_time = wm8350_rtc_readtime,
+        .set_time = wm8350_rtc_settime,
+        .read_alarm = wm8350_rtc_readalarm,
+        .set_alarm = wm8350_rtc_setalarm,
+};
+
+#ifdef CONFIG_PM
+static int wm8350_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+        struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev);
+        int ret = 0;
+        u16 reg;
+
+        reg = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+
+        if (device_may_wakeup(&wm8350->rtc.pdev->dev) &&
+            reg & WM8350_RTC_ALMSTS) {
+                ret = wm8350_rtc_stop_alarm(wm8350);
+                if (ret != 0)
+                        dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n",
+                                ret);
+        }
+
+        return ret;
+}
+
+static int wm8350_rtc_resume(struct platform_device *pdev)
+{
+        struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev);
+        int ret;
+
+        if (wm8350->rtc.alarm_enabled) {
+                ret = wm8350_rtc_start_alarm(wm8350);
+                if (ret != 0)
+                        dev_err(&pdev->dev,
+                                "Failed to restart RTC alarm: %d\n", ret);
+        }
+
+        return 0;
+}
+
+#else
+#define wm8350_rtc_suspend NULL
+#define wm8350_rtc_resume NULL
+#endif
+
+static int wm8350_rtc_probe(struct platform_device *pdev)
+{
+        struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+        struct wm8350_rtc *wm_rtc = &wm8350->rtc;
+        int ret = 0;
+        u16 timectl, power5;
+
+        timectl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL);
+        if (timectl & WM8350_RTC_BCD) {
+                dev_err(&pdev->dev, "RTC BCD mode not supported\n");
+                return -EINVAL;
+        }
+        if (timectl & WM8350_RTC_12HR) {
+                dev_err(&pdev->dev, "RTC 12 hour mode not supported\n");
+                return -EINVAL;
+        }
+
+        /* enable the RTC if it's not already enabled */
+        power5 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
+        if (!(power5 &  WM8350_RTC_TICK_ENA)) {
+                dev_info(wm8350->dev, "Starting RTC\n");
+
+                wm8350_reg_unlock(wm8350);
+
+                ret = wm8350_set_bits(wm8350, WM8350_POWER_MGMT_5,
+                                      WM8350_RTC_TICK_ENA);
+                if (ret < 0) {
+                        dev_err(&pdev->dev, "failed to enable RTC: %d\n", ret);
+                        return ret;
+                }
+
+                wm8350_reg_lock(wm8350);
+        }
+
+        if (timectl & WM8350_RTC_STS) {
+                int retries;
+
+                ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL,
+                                        WM8350_RTC_SET);
+                if (ret < 0) {
+                        dev_err(&pdev->dev, "failed to start: %d\n", ret);
+                        return ret;
+                }
+
+                retries = WM8350_SET_TIME_RETRIES;
+                do {
+                        timectl = wm8350_reg_read(wm8350,
+                                                  WM8350_RTC_TIME_CONTROL);
+                } while (timectl & WM8350_RTC_STS && retries--);
+
+                if (retries == 0) {
+                        dev_err(&pdev->dev, "failed to start: timeout\n");
+                        return -ENODEV;
+                }
+        }
+
+        device_init_wakeup(&pdev->dev, 1);
+
+        wm_rtc->rtc = rtc_device_register("wm8350", &pdev->dev,
+                                          &wm8350_rtc_ops, THIS_MODULE);
+        if (IS_ERR(wm_rtc->rtc)) {
+                ret = PTR_ERR(wm_rtc->rtc);
+                dev_err(&pdev->dev, "failed to register RTC: %d\n", ret);
+                return ret;
+        }
+
+        wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC);
+        wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_PER);
+
+        wm8350_register_irq(wm8350, WM8350_IRQ_RTC_SEC,
+                            wm8350_rtc_update_handler, NULL);
+
+        wm8350_register_irq(wm8350, WM8350_IRQ_RTC_ALM,
+                            wm8350_rtc_alarm_handler, NULL);
+        wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_ALM);
+
+        return 0;
+}
+
+static int __devexit wm8350_rtc_remove(struct platform_device *pdev)
+{
+        struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+        struct wm8350_rtc *wm_rtc = &wm8350->rtc;
+
+        wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC);
+
+        wm8350_free_irq(wm8350, WM8350_IRQ_RTC_SEC);
+        wm8350_free_irq(wm8350, WM8350_IRQ_RTC_ALM);
+
+        rtc_device_unregister(wm_rtc->rtc);
+
+        return 0;
+}
+
+static struct platform_driver wm8350_rtc_driver = {
+        .probe = wm8350_rtc_probe,
+        .remove = __devexit_p(wm8350_rtc_remove),
+        .suspend = wm8350_rtc_suspend,
+        .resume = wm8350_rtc_resume,
+        .driver = {
+                .name = "wm8350-rtc",
+        },
+};
+
+static int __init wm8350_rtc_init(void)
+{
+        return platform_driver_register(&wm8350_rtc_driver);
+}
+module_init(wm8350_rtc_init);
+
+static void __exit wm8350_rtc_exit(void)
+{
+        platform_driver_unregister(&wm8350_rtc_driver);
+}
+module_exit(wm8350_rtc_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("RTC driver for the WM8350");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8350-rtc");
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 4b76fca64a6f..363bd1303d21 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -1746,6 +1746,11 @@ restart:
                         goto restart;
                 }
 
+                /* log sense for fatal error */
+                if (cqr->status == DASD_CQR_FAILED) {
+                        dasd_log_sense(cqr, &cqr->irb);
+                }
+
                 /* First of all call extended error reporting. */
                 if (dasd_eer_enabled(base) &&
                     cqr->status == DASD_CQR_FAILED) {
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index eb5f1b8bc57f..ec9c0bcf66ee 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -324,6 +324,9 @@ static int do_assign_storage(sclp_cmdw_t cmd, u16 rn)
         case 0x0120:
                 break;
         default:
+                pr_warning("assign storage failed (cmd=0x%08x, "
+                           "response=0x%04x, rn=0x%04x)\n", cmd,
+                           sccb->header.response_code, rn);
                 rc = -EIO;
                 break;
         }
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 4e78c82194b4..4e4008325e28 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -874,11 +874,15 @@ void ccw_device_move_to_orphanage(struct work_struct *work)
         replacing_cdev = get_disc_ccwdev_by_dev_id(&dev_id, cdev);
         if (replacing_cdev) {
                 sch_attach_disconnected_device(sch, replacing_cdev);
+                /* Release reference from get_disc_ccwdev_by_dev_id() */
+                put_device(&cdev->dev);
                 return;
         }
         replacing_cdev = get_orphaned_ccwdev_by_dev_id(css, &dev_id);
         if (replacing_cdev) {
                 sch_attach_orphaned_device(sch, replacing_cdev);
+                /* Release reference from get_orphaned_ccwdev_by_dev_id() */
+                put_device(&cdev->dev);
                 return;
         }
         sch_create_and_recog_new_device(sch);
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index ff4a6931bb8e..3d442444c618 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -322,13 +322,13 @@ static int __init kvm_devices_init(void)
                 return rc;
         }
 
-        rc = vmem_add_mapping(PFN_PHYS(max_pfn), PAGE_SIZE);
+        rc = vmem_add_mapping(real_memory_size, PAGE_SIZE);
         if (rc) {
                 s390_root_dev_unregister(kvm_root);
                 return rc;
         }
 
-        kvm_devices = (void *) PFN_PHYS(max_pfn);
+        kvm_devices = (void *) real_memory_size;
 
         ctl_set_bit(0, 9);
         register_external_interrupt(0x2603, kvm_extint_handler);
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 3b56220fb900..3d4e3e3f3fc0 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -610,7 +610,8 @@ struct zfcp_port *zfcp_port_enqueue(struct zfcp_adapter *adapter, u64 wwpn,
         atomic_set_mask(status | ZFCP_STATUS_COMMON_REMOVE, &port->status);
         atomic_set(&port->refcount, 0);
 
-        dev_set_name(&port->sysfs_device, "0x%016llx", wwpn);
+        dev_set_name(&port->sysfs_device, "0x%016llx",
+                     (unsigned long long)wwpn);
         port->sysfs_device.parent = &adapter->ccw_device->dev;
 
         port->sysfs_device.release = zfcp_sysfs_port_release;
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index b04038c74786..951a8d409d1d 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -116,7 +116,9 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device)
         zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, 85,
                                 NULL);
         zfcp_erp_wait(adapter);
-        goto out;
+        up(&zfcp_data.config_sema);
+        flush_work(&adapter->scan_work);
+        return 0;
 
  out_scsi_register:
         zfcp_erp_thread_kill(adapter);
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index 060f5f2352ec..31012d58cfb7 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -30,7 +30,7 @@ static void zfcp_dbf_hexdump(debug_info_t *dbf, void *to, int to_len,
                 dump->offset = offset;
                 dump->size = min(from_len - offset, room);
                 memcpy(dump->data, from + offset, dump->size);
-                debug_event(dbf, level, dump, dump->size);
+                debug_event(dbf, level, dump, dump->size + sizeof(*dump));
         }
 }
 
@@ -108,7 +108,7 @@ static int zfcp_dbf_view_header(debug_info_t *id, struct debug_view *view,
                              t.tv_sec, t.tv_nsec);
                 zfcp_dbf_out(&p, "cpu", "%02i", entry->id.fields.cpuid);
         } else  {
-                zfcp_dbf_outd(&p, NULL, dump->data, dump->size, dump->offset,
+                zfcp_dbf_outd(&p, "", dump->data, dump->size, dump->offset,
                               dump->total_size);
                 if ((dump->offset + dump->size) == dump->total_size)
                         p += sprintf(p, "\n");
@@ -366,6 +366,7 @@ static void zfcp_hba_dbf_view_response(char **p,
                         break;
                 zfcp_dbf_out(p, "scsi_cmnd", "0x%0Lx", r->u.fcp.cmnd);
                 zfcp_dbf_out(p, "scsi_serial", "0x%016Lx", r->u.fcp.serial);
+                p += sprintf(*p, "\n");
                 break;
 
         case FSF_QTCB_OPEN_PORT_WITH_DID:
@@ -465,7 +466,8 @@ static int zfcp_hba_dbf_view_format(debug_info_t *id, struct debug_view *view,
         else if (strncmp(r->tag, "berr", ZFCP_DBF_TAG_SIZE) == 0)
                 zfcp_hba_dbf_view_berr(&p, &r->u.berr);
 
-        p += sprintf(p, "\n");
+        if (strncmp(r->tag, "resp", ZFCP_DBF_TAG_SIZE) != 0)
+                p += sprintf(p, "\n");
         return p - out_buf;
 }
 
@@ -880,6 +882,7 @@ void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req)
         struct ct_hdr *hdr = sg_virt(ct->req);
         struct zfcp_san_dbf_record *r = &adapter->san_dbf_buf;
         struct zfcp_san_dbf_record_ct_request *oct = &r->u.ct_req;
+        int level = 3;
         unsigned long flags;
 
         spin_lock_irqsave(&adapter->san_dbf_lock, flags);
@@ -896,9 +899,10 @@ void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req)
         oct->options = hdr->options;
         oct->max_res_size = hdr->max_res_size;
         oct->len = min((int)ct->req->length - (int)sizeof(struct ct_hdr),
-                       ZFCP_DBF_CT_PAYLOAD);
-        memcpy(oct->payload, (void *)hdr + sizeof(struct ct_hdr), oct->len);
-        debug_event(adapter->san_dbf, 3, r, sizeof(*r));
+                       ZFCP_DBF_SAN_MAX_PAYLOAD);
+        debug_event(adapter->san_dbf, level, r, sizeof(*r));
+        zfcp_dbf_hexdump(adapter->san_dbf, r, sizeof(*r), level,
+                         (void *)hdr + sizeof(struct ct_hdr), oct->len);
         spin_unlock_irqrestore(&adapter->san_dbf_lock, flags);
 }
 
@@ -914,6 +918,7 @@ void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req)
         struct ct_hdr *hdr = sg_virt(ct->resp);
         struct zfcp_san_dbf_record *r = &adapter->san_dbf_buf;
         struct zfcp_san_dbf_record_ct_response *rct = &r->u.ct_resp;
+        int level = 3;
         unsigned long flags;
 
         spin_lock_irqsave(&adapter->san_dbf_lock, flags);
@@ -929,9 +934,10 @@ void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req)
         rct->expl = hdr->reason_code_expl;
         rct->vendor_unique = hdr->vendor_unique;
         rct->len = min((int)ct->resp->length - (int)sizeof(struct ct_hdr),
-                       ZFCP_DBF_CT_PAYLOAD);
-        memcpy(rct->payload, (void *)hdr + sizeof(struct ct_hdr), rct->len);
-        debug_event(adapter->san_dbf, 3, r, sizeof(*r));
+                       ZFCP_DBF_SAN_MAX_PAYLOAD);
+        debug_event(adapter->san_dbf, level, r, sizeof(*r));
+        zfcp_dbf_hexdump(adapter->san_dbf, r, sizeof(*r), level,
+                         (void *)hdr + sizeof(struct ct_hdr), rct->len);
         spin_unlock_irqrestore(&adapter->san_dbf_lock, flags);
 }
 
@@ -954,7 +960,7 @@ static void zfcp_san_dbf_event_els(const char *tag, int level,
         rec->u.els.ls_code = ls_code;
         debug_event(adapter->san_dbf, level, rec, sizeof(*rec));
         zfcp_dbf_hexdump(adapter->san_dbf, rec, sizeof(*rec), level,
-                         buffer, min(buflen, ZFCP_DBF_ELS_MAX_PAYLOAD));
+                         buffer, min(buflen, ZFCP_DBF_SAN_MAX_PAYLOAD));
         spin_unlock_irqrestore(&adapter->san_dbf_lock, flags);
 }
 
@@ -1008,8 +1014,6 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view,
                                     char *out_buf, const char *in_buf)
 {
         struct zfcp_san_dbf_record *r = (struct zfcp_san_dbf_record *)in_buf;
-        char *buffer = NULL;
-        int buflen = 0, total = 0;
         char *p = out_buf;
 
         if (strncmp(r->tag, "dump", ZFCP_DBF_TAG_SIZE) == 0)
@@ -1029,9 +1033,6 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view,
                 zfcp_dbf_out(&p, "gs_subtype", "0x%02x", ct->gs_subtype);
                 zfcp_dbf_out(&p, "options", "0x%02x", ct->options);
                 zfcp_dbf_out(&p, "max_res_size", "0x%04x", ct->max_res_size);
-                total = ct->len;
-                buffer = ct->payload;
-                buflen = min(total, ZFCP_DBF_CT_PAYLOAD);
         } else if (strncmp(r->tag, "rctc", ZFCP_DBF_TAG_SIZE) == 0) {
                 struct zfcp_san_dbf_record_ct_response *ct = &r->u.ct_resp;
                 zfcp_dbf_out(&p, "cmd_rsp_code", "0x%04x", ct->cmd_rsp_code);
@@ -1039,23 +1040,12 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view,
                 zfcp_dbf_out(&p, "reason_code", "0x%02x", ct->reason_code);
                 zfcp_dbf_out(&p, "reason_code_expl", "0x%02x", ct->expl);
                 zfcp_dbf_out(&p, "vendor_unique", "0x%02x", ct->vendor_unique);
-                total = ct->len;
-                buffer = ct->payload;
-                buflen = min(total, ZFCP_DBF_CT_PAYLOAD);
         } else if (strncmp(r->tag, "oels", ZFCP_DBF_TAG_SIZE) == 0 ||
                    strncmp(r->tag, "rels", ZFCP_DBF_TAG_SIZE) == 0 ||
                    strncmp(r->tag, "iels", ZFCP_DBF_TAG_SIZE) == 0) {
                 struct zfcp_san_dbf_record_els *els = &r->u.els;
                 zfcp_dbf_out(&p, "ls_code", "0x%02x", els->ls_code);
-                total = els->len;
-                buffer = els->payload;
-                buflen = min(total, ZFCP_DBF_ELS_PAYLOAD);
         }
-
-        zfcp_dbf_outd(&p, "payload", buffer, buflen, 0, total);
-        if (buflen == total)
-                p += sprintf(p, "\n");
-
         return p - out_buf;
 }
 
diff --git a/drivers/s390/scsi/zfcp_dbf.h b/drivers/s390/scsi/zfcp_dbf.h
index e8f450801fea..5d6b2dff855b 100644
--- a/drivers/s390/scsi/zfcp_dbf.h
+++ b/drivers/s390/scsi/zfcp_dbf.h
@@ -163,8 +163,6 @@ struct zfcp_san_dbf_record_ct_request {
         u8 options;
         u16 max_res_size;
         u32 len;
-#define ZFCP_DBF_CT_PAYLOAD     24
-        u8 payload[ZFCP_DBF_CT_PAYLOAD];
 } __attribute__ ((packed));
 
 struct zfcp_san_dbf_record_ct_response {
@@ -174,15 +172,11 @@ struct zfcp_san_dbf_record_ct_response {
         u8 expl;
         u8 vendor_unique;
         u32 len;
-        u8 payload[ZFCP_DBF_CT_PAYLOAD];
 } __attribute__ ((packed));
 
 struct zfcp_san_dbf_record_els {
         u8 ls_code;
         u32 len;
-#define ZFCP_DBF_ELS_PAYLOAD    32
-#define ZFCP_DBF_ELS_MAX_PAYLOAD 1024
-        u8 payload[ZFCP_DBF_ELS_PAYLOAD];
 } __attribute__ ((packed));
 
 struct zfcp_san_dbf_record {
@@ -196,6 +190,8 @@ struct zfcp_san_dbf_record {
                 struct zfcp_san_dbf_record_ct_response ct_resp;
                 struct zfcp_san_dbf_record_els els;
         } u;
+#define ZFCP_DBF_SAN_MAX_PAYLOAD 1024
+        u8 payload[32];
 } __attribute__ ((packed));
 
 struct zfcp_scsi_dbf_record {
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 9040f738ff33..35364f64da7f 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -472,6 +472,7 @@ static void zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *act)
                                    ZFCP_STATUS_ERP_TIMEDOUT)) {
                         act->fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED;
                         zfcp_rec_dbf_event_action(142, act);
+                        act->fsf_req->erp_action = NULL;
                 }
                 if (act->status & ZFCP_STATUS_ERP_TIMEDOUT)
                         zfcp_rec_dbf_event_action(143, act);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 5ae1d497e5ed..d024442ee128 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -683,6 +683,7 @@ static struct zfcp_fsf_req *zfcp_fsf_alloc_noqtcb(mempool_t *pool)
         if (!req)
                 return NULL;
         memset(req, 0, sizeof(*req));
+        req->pool = pool;
         return req;
 }
 
@@ -769,28 +770,24 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_adapter *adapter,
 static int zfcp_fsf_req_send(struct zfcp_fsf_req *req)
 {
         struct zfcp_adapter *adapter = req->adapter;
-        struct zfcp_qdio_queue *req_q = &adapter->req_q;
+        unsigned long flags;
         int idx;
 
         /* put allocated FSF request into hash table */
-        spin_lock(&adapter->req_list_lock);
+        spin_lock_irqsave(&adapter->req_list_lock, flags);
         idx = zfcp_reqlist_hash(req->req_id);
         list_add_tail(&req->list, &adapter->req_list[idx]);
-        spin_unlock(&adapter->req_list_lock);
+        spin_unlock_irqrestore(&adapter->req_list_lock, flags);
 
-        req->qdio_outb_usage = atomic_read(&req_q->count);
+        req->qdio_outb_usage = atomic_read(&adapter->req_q.count);
         req->issued = get_clock();
         if (zfcp_qdio_send(req)) {
-                /* Queues are down..... */
                 del_timer(&req->timer);
-                spin_lock(&adapter->req_list_lock);
-                zfcp_reqlist_remove(adapter, req);
-                spin_unlock(&adapter->req_list_lock);
-                /* undo changes in request queue made for this request */
-                atomic_add(req->sbal_number, &req_q->count);
-                req_q->first -= req->sbal_number;
-                req_q->first += QDIO_MAX_BUFFERS_PER_Q;
-                req_q->first %= QDIO_MAX_BUFFERS_PER_Q; /* wrap */
+                spin_lock_irqsave(&adapter->req_list_lock, flags);
+                /* lookup request again, list might have changed */
+                if (zfcp_reqlist_find_safe(adapter, req))
+                        zfcp_reqlist_remove(adapter, req);
+                spin_unlock_irqrestore(&adapter->req_list_lock, flags);
                 zfcp_erp_adapter_reopen(adapter, 0, 116, req);
                 return -EIO;
         }
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index ca8f85f3dad4..e46fd3e9f68f 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -24,14 +24,10 @@ char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *fcp_rsp_iu)
 static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt)
 {
         struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata;
-        WARN_ON(!unit);
-        if (unit) {
-                atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status);
-                sdpnt->hostdata = NULL;
-                unit->device = NULL;
-                zfcp_erp_unit_failed(unit, 12, NULL);
-                zfcp_unit_put(unit);
-        }
+        atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status);
+        unit->device = NULL;
+        zfcp_erp_unit_failed(unit, 12, NULL);
+        zfcp_unit_put(unit);
 }
 
 static int zfcp_scsi_slave_configure(struct scsi_device *sdp)
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 8aba4fdfb522..6194ed5d02c4 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -2445,7 +2445,7 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd)
         hba_status = detailed_status >> 8;
 
         // calculate resid for sg 
-        scsi_set_resid(cmd, scsi_bufflen(cmd) - readl(reply+5));
+        scsi_set_resid(cmd, scsi_bufflen(cmd) - readl(reply+20));
 
         pHba = (adpt_hba*) cmd->device->host->hostdata[0];
 
@@ -2456,7 +2456,7 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd)
                 case I2O_SCSI_DSC_SUCCESS:
                         cmd->result = (DID_OK << 16);
                         // handle underflow
-                        if(readl(reply+5) < cmd->underflow ) {
+                        if (readl(reply+20) < cmd->underflow) {
                                 cmd->result = (DID_ERROR <<16);
                                 printk(KERN_WARNING"%s: SCSI CMD underflow\n",pHba->name);
                         }
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 28c9da7d4a5c..7dc62deb4087 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -4402,6 +4402,10 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
         scb_t   *scb;
         int     rval;
 
+        scmd = scsi_allocate_command(GFP_KERNEL);
+        if (!scmd)
+                return -ENOMEM;
+
         /*
          * The internal commands share one command id and hence are
          * serialized. This is so because we want to reserve maximum number of
@@ -4412,12 +4416,11 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
         scb = &adapter->int_scb;
         memset(scb, 0, sizeof(scb_t));
 
-        scmd = &adapter->int_scmd;
-        memset(scmd, 0, sizeof(Scsi_Cmnd));
-
         sdev = kzalloc(sizeof(struct scsi_device), GFP_KERNEL);
         scmd->device = sdev;
 
+        memset(adapter->int_cdb, 0, sizeof(adapter->int_cdb));
+        scmd->cmnd = adapter->int_cdb;
         scmd->device->host = adapter->host;
         scmd->host_scribble = (void *)scb;
         scmd->cmnd[0] = MEGA_INTERNAL_CMD;
@@ -4456,6 +4459,8 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
 
         mutex_unlock(&adapter->int_mtx);
 
+        scsi_free_command(GFP_KERNEL, scmd);
+
         return rval;
 }
 
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index ee70bd4ae4ba..795201fa0b48 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -888,8 +888,8 @@ typedef struct {
 
         u8      sglen;  /* f/w supported scatter-gather list length */
 
+        unsigned char int_cdb[MAX_COMMAND_SIZE];
         scb_t                   int_scb;
-        Scsi_Cmnd               int_scmd;
         struct mutex            int_mtx;        /* To synchronize the internal
                                                 commands */
         struct completion       int_waitq;      /* wait queue for internal
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index f25f41a499e5..b97194096d8e 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2547,7 +2547,6 @@ typedef struct scsi_qla_host {
         uint8_t         fcode_revision[16];
         uint32_t        fw_revision[4];
 
-        uint16_t        fdt_odd_index;
         uint32_t        fdt_wrt_disable;
         uint32_t        fdt_erase_cmd;
         uint32_t        fdt_block_size;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index a470f2d3270d..4218f20f5ed5 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -140,7 +140,6 @@ int
 qla2100_pci_config(scsi_qla_host_t *ha)
 {
         uint16_t w;
-        uint32_t d;
         unsigned long flags;
         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 
@@ -151,10 +150,7 @@ qla2100_pci_config(scsi_qla_host_t *ha)
         w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
         pci_write_config_word(ha->pdev, PCI_COMMAND, w);
 
-        /* Reset expansion ROM address decode enable */
-        pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
-        d &= ~PCI_ROM_ADDRESS_ENABLE;
-        pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
+        pci_disable_rom(ha->pdev);
 
         /* Get PCI bus information. */
         spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -174,7 +170,6 @@ int
 qla2300_pci_config(scsi_qla_host_t *ha)
 {
         uint16_t        w;
-        uint32_t        d;
         unsigned long   flags = 0;
         uint32_t        cnt;
         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
@@ -236,10 +231,7 @@ qla2300_pci_config(scsi_qla_host_t *ha)
 
         pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
 
-        /* Reset expansion ROM address decode enable */
-        pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
-        d &= ~PCI_ROM_ADDRESS_ENABLE;
-        pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
+        pci_disable_rom(ha->pdev);
 
         /* Get PCI bus information. */
         spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -259,7 +251,6 @@ int
 qla24xx_pci_config(scsi_qla_host_t *ha)
 {
         uint16_t w;
-        uint32_t d;
         unsigned long flags = 0;
         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 
@@ -281,10 +272,7 @@ qla24xx_pci_config(scsi_qla_host_t *ha)
         if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
                 pcie_set_readrq(ha->pdev, 2048);
 
-        /* Reset expansion ROM address decode enable */
-        pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
-        d &= ~PCI_ROM_ADDRESS_ENABLE;
-        pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
+        pci_disable_rom(ha->pdev);
 
         ha->chip_revision = ha->pdev->revision;
 
@@ -306,7 +294,6 @@ int
 qla25xx_pci_config(scsi_qla_host_t *ha)
 {
         uint16_t w;
-        uint32_t d;
 
         pci_set_master(ha->pdev);
         pci_try_set_mwi(ha->pdev);
@@ -320,10 +307,7 @@ qla25xx_pci_config(scsi_qla_host_t *ha)
         if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
                 pcie_set_readrq(ha->pdev, 2048);
 
-        /* Reset expansion ROM address decode enable */
-        pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d);
-        d &= ~PCI_ROM_ADDRESS_ENABLE;
-        pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
+        pci_disable_rom(ha->pdev);
 
         ha->chip_revision = ha->pdev->revision;
 
@@ -980,7 +964,6 @@ qla2x00_setup_chip(scsi_qla_host_t *ha)
                                     &ha->fw_minor_version,
                                     &ha->fw_subminor_version,
                                     &ha->fw_attributes, &ha->fw_memory_size);
-                                qla2x00_resize_request_q(ha);
                                 ha->flags.npiv_supported = 0;
                                 if ((IS_QLA24XX(ha) || IS_QLA25XX(ha) ||
                                      IS_QLA84XX(ha)) &&
@@ -992,6 +975,7 @@ qla2x00_setup_chip(scsi_qla_host_t *ha)
                                                 ha->max_npiv_vports =
                                                     MIN_MULTI_ID_FABRIC - 1;
                                 }
+                                qla2x00_resize_request_q(ha);
 
                                 if (ql2xallocfwdump)
                                         qla2x00_alloc_fw_dump(ha);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 36bc6851e23d..3402746ec128 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1964,7 +1964,7 @@ qla2x00_get_resource_cnts(scsi_qla_host_t *ha, uint16_t *cur_xchg_cnt,
                         *cur_iocb_cnt = mcp->mb[7];
                 if (orig_iocb_cnt)
                         *orig_iocb_cnt = mcp->mb[10];
-                if (max_npiv_vports)
+                if (ha->flags.npiv_supported && max_npiv_vports)
                         *max_npiv_vports = mcp->mb[11];
         }
 
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 21dd182ad512..35567203ef61 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -728,6 +728,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
                 if (ha->isp_ops->abort_command(ha, sp)) {
                         DEBUG2(printk("%s(%ld): abort_command "
                             "mbx failed.\n", __func__, ha->host_no));
+                        ret = FAILED;
                 } else {
                         DEBUG3(printk("%s(%ld): abort_command "
                             "mbx success.\n", __func__, ha->host_no));
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 90a13211717f..e4af678eb2d6 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -722,6 +722,7 @@ done:
 static void
 qla2xxx_get_fdt_info(scsi_qla_host_t *ha)
 {
+#define FLASH_BLK_SIZE_4K       0x1000
 #define FLASH_BLK_SIZE_32K      0x8000
 #define FLASH_BLK_SIZE_64K      0x10000
         const char *loc, *locations[] = { "MID", "FDT" };
@@ -755,7 +756,6 @@ qla2xxx_get_fdt_info(scsi_qla_host_t *ha)
         loc = locations[1];
         mid = le16_to_cpu(fdt->man_id);
         fid = le16_to_cpu(fdt->id);
-        ha->fdt_odd_index = mid == 0x1f;
         ha->fdt_wrt_disable = fdt->wrt_disable_bits;
         ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0300 | fdt->erase_cmd);
         ha->fdt_block_size = le32_to_cpu(fdt->block_size);
@@ -788,8 +788,7 @@ no_flash_data:
                 ha->fdt_block_size = FLASH_BLK_SIZE_64K;
                 break;
         case 0x1f: /* Atmel 26DF081A. */
-                ha->fdt_odd_index = 1;
-                ha->fdt_block_size = FLASH_BLK_SIZE_64K;
+                ha->fdt_block_size = FLASH_BLK_SIZE_4K;
                 ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0320);
                 ha->fdt_unprotect_sec_cmd = flash_conf_to_access_addr(0x0339);
                 ha->fdt_protect_sec_cmd = flash_conf_to_access_addr(0x0336);
@@ -801,9 +800,9 @@ no_flash_data:
         }
 done:
         DEBUG2(qla_printk(KERN_DEBUG, ha, "FDT[%s]: (0x%x/0x%x) erase=0x%x "
-            "pro=%x upro=%x idx=%d wrtd=0x%x blk=0x%x.\n", loc, mid, fid,
+            "pro=%x upro=%x wrtd=0x%x blk=0x%x.\n", loc, mid, fid,
             ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd,
-            ha->fdt_unprotect_sec_cmd, ha->fdt_odd_index, ha->fdt_wrt_disable,
+            ha->fdt_unprotect_sec_cmd, ha->fdt_wrt_disable,
             ha->fdt_block_size));
 }
 
@@ -987,13 +986,9 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
         qla24xx_unprotect_flash(ha);
 
         for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
-                if (ha->fdt_odd_index) {
-                        findex = faddr << 2;
-                        fdata = findex & sec_mask;
-                } else {
-                        findex = faddr;
-                        fdata = (findex & sec_mask) << 2;
-                }
+
+                findex = faddr;
+                fdata = (findex & sec_mask) << 2;
 
                 /* Are we at the beginning of a sector? */
                 if ((findex & rest_addr) == 0) {
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index be5e299df528..eea6720adf16 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.02.01-k8"
+#define QLA2XXX_VERSION      "8.02.01-k9"
 
 #define QLA_DRIVER_MAJOR_VER    8
 #define QLA_DRIVER_MINOR_VER    2
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 94ed262bdf0c..386361778ebb 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -1340,9 +1340,10 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd)
                  * LLD/transport was disrupted during processing of the IO.
                  * The transport class is now blocked/blocking,
                  * and the transport will decide what to do with the IO
-                 * based on its timers and recovery capablilities.
+                 * based on its timers and recovery capablilities if
+                 * there are enough retries.
                  */
-                return ADD_TO_MLQUEUE;
+                goto maybe_retry;
         case DID_TRANSPORT_FAILFAST:
                 /*
                  * The transport decided to failfast the IO (most likely
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 5c0f32c7fbf6..165fc010978c 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -144,9 +144,9 @@ static void put_char(struct uart_port *port, char c)
                 status = sci_in(port, SCxSR);
         } while (!(status & SCxSR_TDxE(port)));
 
-        sci_out(port, SCxTDR, c);
         sci_in(port, SCxSR);            /* Dummy read */
         sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+        sci_out(port, SCxTDR, c);
 
         spin_unlock_irqrestore(&port->lock, flags);
 }
@@ -478,10 +478,10 @@ static void sci_transmit_chars(struct uart_port *port)
                 return;
         }
 
-        if (port->type == PORT_SCIF)
-                count = scif_txroom(port);
-        else
+        if (port->type == PORT_SCI)
                 count = sci_txroom(port);
+        else
+                count = scif_txroom(port);
 
         do {
                 unsigned char c;
@@ -510,7 +510,7 @@ static void sci_transmit_chars(struct uart_port *port)
         } else {
                 ctrl = sci_in(port, SCSCR);
 
-                if (port->type == PORT_SCIF) {
+                if (port->type != PORT_SCI) {
                         sci_in(port, SCxSR); /* Dummy read */
                         sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
                 }
@@ -536,10 +536,10 @@ static inline void sci_receive_chars(struct uart_port *port)
                 return;
 
         while (1) {
-                if (port->type == PORT_SCIF)
-                        count = scif_rxroom(port);
-                else
+                if (port->type == PORT_SCI)
                         count = sci_rxroom(port);
+                else
+                        count = scif_rxroom(port);
 
                 /* Don't copy more bytes than there is room for in the buffer */
                 count = tty_buffer_request_room(tty, count);
@@ -714,7 +714,7 @@ static inline int sci_handle_breaks(struct uart_port *port)
 
 #if defined(SCIF_ORER)
         /* XXX: Handle SCIF overrun error */
-        if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) {
+        if (port->type != PORT_SCI && (sci_in(port, SCLSR) & SCIF_ORER) != 0) {
                 sci_out(port, SCLSR, 0);
                 if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) {
                         copied++;
@@ -1042,7 +1042,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 
         sci_out(port, SCSCR, 0x00);     /* TE=0, RE=0, CKE1=0 */
 
-        if (port->type == PORT_SCIF)
+        if (port->type != PORT_SCI)
                 sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
 
         smr_val = sci_in(port, SCSMR) & 3;
@@ -1085,6 +1085,7 @@ static const char *sci_type(struct uart_port *port)
                 case PORT_SCI:  return "sci";
                 case PORT_SCIF: return "scif";
                 case PORT_IRDA: return "irda";
+                case PORT_SCIFA:        return "scifa";
         }
 
         return NULL;
@@ -1112,6 +1113,7 @@ static void sci_config_port(struct uart_port *port, int flags)
                 s->init_pins = sci_init_pins_sci;
                 break;
         case PORT_SCIF:
+        case PORT_SCIFA:
                 s->init_pins = sci_init_pins_scif;
                 break;
         case PORT_IRDA:
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 6163a45f968f..9f33b064172e 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -289,18 +289,18 @@
 #define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\
   static inline unsigned int sci_##name##_in(struct uart_port *port)    \
   {                                                                     \
-    if (port->type == PORT_SCI) {                                       \
-      SCI_IN(sci_size, sci_offset)                                      \
-    } else {                                                            \
-      SCI_IN(scif_size, scif_offset);                                   \
+    if (port->type == PORT_SCIF) {                                      \
+      SCI_IN(scif_size, scif_offset)                                    \
+    } else {    /* PORT_SCI or PORT_SCIFA */                            \
+      SCI_IN(sci_size, sci_offset);                                     \
     }                                                                   \
   }                                                                     \
   static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
   {                                                                     \
-    if (port->type == PORT_SCI) {                                       \
-      SCI_OUT(sci_size, sci_offset, value)                              \
-    } else {                                                            \
-      SCI_OUT(scif_size, scif_offset, value);                           \
+    if (port->type == PORT_SCIF) {                                      \
+      SCI_OUT(scif_size, scif_offset, value)                            \
+    } else {    /* PORT_SCI or PORT_SCIFA */                            \
+      SCI_OUT(sci_size, sci_offset, value);                             \
     }                                                                   \
   }
 
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 02f9320f3efc..8abae4ad0fa5 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -766,6 +766,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
         /* Initialize the hardware */
         clk_enable(clk);
         spi_writel(as, CR, SPI_BIT(SWRST));
+        spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
         spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS));
         spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
         spi_writel(as, CR, SPI_BIT(SPIEN));
@@ -782,6 +783,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
 
 out_reset_hw:
         spi_writel(as, CR, SPI_BIT(SWRST));
+        spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
         clk_disable(clk);
         free_irq(irq, master);
 out_unmap_regs:
@@ -805,6 +807,7 @@ static int __exit atmel_spi_remove(struct platform_device *pdev)
         spin_lock_irq(&as->lock);
         as->stopping = 1;
         spi_writel(as, CR, SPI_BIT(SWRST));
+        spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
         spi_readl(as, SR);
         spin_unlock_irq(&as->lock);
 
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index 307b1f62d949..b1b947edcf01 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -1,10 +1,11 @@
-menu "Sonics Silicon Backplane"
-
 config SSB_POSSIBLE
         bool
         depends on HAS_IOMEM && HAS_DMA
         default y
 
+menu "Sonics Silicon Backplane"
+        depends on SSB_POSSIBLE
+
 config SSB
         tristate "Sonics Silicon Backplane support"
         depends on SSB_POSSIBLE
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 0a49cd788a75..c95b286a1239 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -23,7 +23,7 @@ menuconfig STAGING
 
 
 config STAGING_EXCLUDE_BUILD
-        bool "Exclude Staging drivers from being built"
+        bool "Exclude Staging drivers from being built" if STAGING
         default y
         ---help---
           Are you sure you really want to build the staging drivers?
diff --git a/drivers/telephony/phonedev.c b/drivers/telephony/phonedev.c
index 37caf4d69037..b52cc830c0b4 100644
--- a/drivers/telephony/phonedev.c
+++ b/drivers/telephony/phonedev.c
@@ -8,7 +8,7 @@
  *              as published by the Free Software Foundation; either version
  *              2 of the License, or (at your option) any later version.
  *
- * Author:      Alan Cox, <alan@redhat.com>
+ * Author:      Alan Cox, <alan@lxorguk.ukuu.org.uk>
  *
  * Fixes:       Mar 01 2000 Thomas Sparr, <thomas.l.sparr@telia.com>
  *              phone_register_device now works with unit!=PHONE_UNIT_ANY
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 20104443081a..d50a99f70aee 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -158,16 +158,12 @@ static int acm_wb_is_avail(struct acm *acm)
 }
 
 /*
- * Finish write.
+ * Finish write. Caller must hold acm->write_lock
  */
 static void acm_write_done(struct acm *acm, struct acm_wb *wb)
 {
-        unsigned long flags;
-
-        spin_lock_irqsave(&acm->write_lock, flags);
         wb->use = 0;
         acm->transmitting--;
-        spin_unlock_irqrestore(&acm->write_lock, flags);
 }
 
 /*
@@ -482,6 +478,7 @@ static void acm_write_bulk(struct urb *urb)
 {
         struct acm_wb *wb = urb->context;
         struct acm *acm = wb->instance;
+        unsigned long flags;
 
         if (verbose || urb->status
                         || (urb->actual_length != urb->transfer_buffer_length))
@@ -490,7 +487,9 @@ static void acm_write_bulk(struct urb *urb)
                         urb->transfer_buffer_length,
                         urb->status);
 
+        spin_lock_irqsave(&acm->write_lock, flags);
         acm_write_done(acm, wb);
+        spin_unlock_irqrestore(&acm->write_lock, flags);
         if (ACM_READY(acm))
                 schedule_work(&acm->work);
         else
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 887738577b28..6d1048faf08e 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1091,6 +1091,7 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
                                 continue;
                         dev_dbg(&dev->dev, "unregistering interface %s\n",
                                 dev_name(&interface->dev));
+                        interface->unregistering = 1;
                         usb_remove_sysfs_intf_files(interface);
                         device_del(&interface->dev);
                 }
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index f66fba11fbd5..4fb65fdc9dc3 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -840,7 +840,7 @@ int usb_create_sysfs_intf_files(struct usb_interface *intf)
         struct usb_host_interface *alt = intf->cur_altsetting;
         int retval;
 
-        if (intf->sysfs_files_created)
+        if (intf->sysfs_files_created || intf->unregistering)
                 return 0;
 
         /* The interface string may be present in some altsettings
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 4342bd9c3bb6..1f68af9db3f7 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -85,8 +85,8 @@ EXPORT_SYMBOL_GPL(usb_alloc_urb);
  * Must be called when a user of a urb is finished with it.  When the last user
  * of the urb calls this function, the memory of the urb is freed.
  *
- * Note: The transfer buffer associated with the urb is not freed, that must be
- * done elsewhere.
+ * Note: The transfer buffer associated with the urb is not freed unless the
+ * URB_FREE_BUFFER transfer flag is set.
  */
 void usb_free_urb(struct urb *urb)
 {
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index 5ee1590b8e9c..c1d34df0b157 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -463,7 +463,11 @@ static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value,
         notify->wLength = cpu_to_le16(length);
         memcpy(buf, data, length);
 
+        /* ep_queue() can complete immediately if it fills the fifo... */
+        spin_unlock(&acm->lock);
         status = usb_ep_queue(ep, req, GFP_ATOMIC);
+        spin_lock(&acm->lock);
+
         if (status < 0) {
                 ERROR(acm->port.func.config->cdev,
                                 "acm ttyGS%d can't notify serial state, %d\n",
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 56f592dc0b36..f3a75a929e0a 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -110,29 +110,18 @@ config USB_ISP116X_HCD
 
 config USB_ISP1760_HCD
         tristate "ISP 1760 HCD support"
-        depends on USB && EXPERIMENTAL
+        depends on USB && EXPERIMENTAL && (PCI || PPC_OF)
         ---help---
           The ISP1760 chip is a USB 2.0 host controller.
 
           This driver does not support isochronous transfers or OTG.
+          This USB controller is usually attached to a non-DMA-Master
+          capable bus. NXP's eval kit brings this chip on PCI card
+          where the chip itself is behind a PLB to simulate such
+          a bus.
 
           To compile this driver as a module, choose M here: the
-          module will be called isp1760-hcd.
-
-config USB_ISP1760_PCI
-        bool "Support for the PCI bus"
-        depends on USB_ISP1760_HCD && PCI
-        ---help---
-          Enables support for the device present on the PCI bus.
-          This should only be required if you happen to have the eval kit from
-          NXP and you are going to test it.
-
-config USB_ISP1760_OF
-        bool "Support for the OF platform bus"
-        depends on USB_ISP1760_HCD && PPC_OF
-        ---help---
-          Enables support for the device present on the PowerPC
-          OpenFirmware platform bus.
+          module will be called isp1760.
 
 config USB_OHCI_HCD
         tristate "OHCI HCD support"
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 15a803b206b8..4725d15d096f 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -643,7 +643,7 @@ static int ehci_run (struct usb_hcd *hcd)
 static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 {
         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
-        u32                     status, pcd_status = 0, cmd;
+        u32                     status, masked_status, pcd_status = 0, cmd;
         int                     bh;
 
         spin_lock (&ehci->lock);
@@ -656,14 +656,14 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
                 goto dead;
         }
 
-        status &= INTR_MASK;
-        if (!status) {                  /* irq sharing? */
+        masked_status = status & INTR_MASK;
+        if (!masked_status) {           /* irq sharing? */
                 spin_unlock(&ehci->lock);
                 return IRQ_NONE;
         }
 
         /* clear (just) interrupts */
-        ehci_writel(ehci, status, &ehci->regs->status);
+        ehci_writel(ehci, masked_status, &ehci->regs->status);
         cmd = ehci_readl(ehci, &ehci->regs->command);
         bh = 0;
 
@@ -734,18 +734,17 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 
         /* PCI errors [4.15.2.4] */
         if (unlikely ((status & STS_FATAL) != 0)) {
+                ehci_err(ehci, "fatal error\n");
                 dbg_cmd(ehci, "fatal", cmd);
                 dbg_status(ehci, "fatal", status);
-                if (status & STS_HALT) {
-                        ehci_err (ehci, "fatal error\n");
+                ehci_halt(ehci);
 dead:
-                        ehci_reset (ehci);
-                        ehci_writel(ehci, 0, &ehci->regs->configured_flag);
-                        /* generic layer kills/unlinks all urbs, then
-                         * uses ehci_stop to clean up the rest
-                         */
-                        bh = 1;
-                }
+                ehci_reset(ehci);
+                ehci_writel(ehci, 0, &ehci->regs->configured_flag);
+                /* generic layer kills/unlinks all urbs, then
+                 * uses ehci_stop to clean up the rest
+                 */
+                bh = 1;
         }
 
         if (bh)
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 0eba894bcb01..9c9da35abc6c 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -205,6 +205,7 @@ static int ps3_ehci_remove(struct ps3_system_bus_device *dev)
 
         tmp = hcd->irq;
 
+        ehci_shutdown(hcd);
         usb_remove_hcd(hcd);
 
         ps3_system_bus_set_driver_data(dev, NULL);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 4a0c5a78b2ed..a081ee65bde6 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -918,7 +918,7 @@ iso_stream_init (
                  */
                 stream->usecs = HS_USECS_ISO (maxp);
                 bandwidth = stream->usecs * 8;
-                bandwidth /= 1 << (interval - 1);
+                bandwidth /= interval;
 
         } else {
                 u32             addr;
@@ -951,7 +951,7 @@ iso_stream_init (
                 } else
                         stream->raw_mask = smask_out [hs_transfers - 1];
                 bandwidth = stream->usecs + stream->c_usecs;
-                bandwidth /= 1 << (interval + 2);
+                bandwidth /= interval << 3;
 
                 /* stream->splits gets created from raw_mask later */
                 stream->address = cpu_to_hc32(ehci, addr);
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index af849f596135..b87ca7cf4b37 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -14,16 +14,16 @@
 #include "../core/hcd.h"
 #include "isp1760-hcd.h"
 
-#ifdef CONFIG_USB_ISP1760_OF
+#ifdef CONFIG_PPC_OF
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #endif
 
-#ifdef CONFIG_USB_ISP1760_PCI
+#ifdef CONFIG_PCI
 #include <linux/pci.h>
 #endif
 
-#ifdef CONFIG_USB_ISP1760_OF
+#ifdef CONFIG_PPC_OF
 static int of_isp1760_probe(struct of_device *dev,
                 const struct of_device_id *match)
 {
@@ -128,7 +128,7 @@ static struct of_platform_driver isp1760_of_driver = {
 };
 #endif
 
-#ifdef CONFIG_USB_ISP1760_PCI
+#ifdef CONFIG_PCI
 static u32 nxp_pci_io_base;
 static u32 iolength;
 static u32 pci_mem_phy0;
@@ -288,28 +288,28 @@ static struct pci_driver isp1761_pci_driver = {
 
 static int __init isp1760_init(void)
 {
-        int ret = -ENODEV;
+        int ret;
 
         init_kmem_once();
 
-#ifdef CONFIG_USB_ISP1760_OF
+#ifdef CONFIG_PPC_OF
         ret = of_register_platform_driver(&isp1760_of_driver);
         if (ret) {
                 deinit_kmem_cache();
                 return ret;
         }
 #endif
-#ifdef CONFIG_USB_ISP1760_PCI
+#ifdef CONFIG_PCI
         ret = pci_register_driver(&isp1761_pci_driver);
         if (ret)
                 goto unreg_of;
 #endif
         return ret;
 
-#ifdef CONFIG_USB_ISP1760_PCI
+#ifdef CONFIG_PCI
 unreg_of:
 #endif
-#ifdef CONFIG_USB_ISP1760_OF
+#ifdef CONFIG_PPC_OF
         of_unregister_platform_driver(&isp1760_of_driver);
 #endif
         deinit_kmem_cache();
@@ -319,10 +319,10 @@ module_init(isp1760_init);
 
 static void __exit isp1760_exit(void)
 {
-#ifdef CONFIG_USB_ISP1760_OF
+#ifdef CONFIG_PPC_OF
         of_unregister_platform_driver(&isp1760_of_driver);
 #endif
-#ifdef CONFIG_USB_ISP1760_PCI
+#ifdef CONFIG_PCI
         pci_unregister_driver(&isp1761_pci_driver);
 #endif
         deinit_kmem_cache();
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 2089d8a46c4b..3c1a3b5f89f1 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -192,7 +192,7 @@ fail_start:
         return result;
 }
 
-static int ps3_ohci_remove (struct ps3_system_bus_device *dev)
+static int ps3_ohci_remove(struct ps3_system_bus_device *dev)
 {
         unsigned int tmp;
         struct usb_hcd *hcd =
@@ -205,6 +205,7 @@ static int ps3_ohci_remove (struct ps3_system_bus_device *dev)
 
         tmp = hcd->irq;
 
+        ohci_shutdown(hcd);
         usb_remove_hcd(hcd);
 
         ps3_system_bus_set_driver_data(dev, NULL);
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index c18d8790c410..2376f24f3c83 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -1763,11 +1763,12 @@ static void r8a66597_timer(unsigned long _r8a66597)
 {
         struct r8a66597 *r8a66597 = (struct r8a66597 *)_r8a66597;
         unsigned long flags;
+        int port;
 
         spin_lock_irqsave(&r8a66597->lock, flags);
 
-        r8a66597_root_hub_control(r8a66597, 0);
-        r8a66597_root_hub_control(r8a66597, 1);
+        for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
+                r8a66597_root_hub_control(r8a66597, port);
 
         spin_unlock_irqrestore(&r8a66597->lock, flags);
 }
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 69c34a58e205..b4ec716de7da 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3270,6 +3270,7 @@ static struct usb_device_id sisusb_table [] = {
         { USB_DEVICE(0x0711, 0x0900) },
         { USB_DEVICE(0x0711, 0x0901) },
         { USB_DEVICE(0x0711, 0x0902) },
+        { USB_DEVICE(0x0711, 0x0903) },
         { USB_DEVICE(0x0711, 0x0918) },
         { USB_DEVICE(0x182d, 0x021c) },
         { USB_DEVICE(0x182d, 0x0269) },
diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c
index 8648470c81ca..63dff9ba73c5 100644
--- a/drivers/usb/misc/vstusb.c
+++ b/drivers/usb/misc/vstusb.c
@@ -620,7 +620,7 @@ static long vstusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
                                 __func__);
                         retval = -EFAULT;
                 } else {
-                        dev_dbg(&dev->dev, "%s: recv %d bytes from pipe %d\n",
+                        dev_dbg(&dev->dev, "%s: recv %zd bytes from pipe %d\n",
                                 __func__, usb_data.count, usb_data.pipe);
                 }
 
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 4a35745b30be..5280dba9b1fb 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -114,8 +114,8 @@
 
 
 
-unsigned debug;
-module_param(debug, uint, S_IRUGO | S_IWUSR);
+unsigned musb_debug;
+module_param(musb_debug, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
 
 #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
@@ -2248,7 +2248,7 @@ static int __init musb_init(void)
                 "host"
 #endif
                 ", debug=%d\n",
-                musb_driver_name, debug);
+                musb_driver_name, musb_debug);
         return platform_driver_probe(&musb_driver, musb_probe);
 }
 
diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h
index 4d2794441b15..9fc1db44c72c 100644
--- a/drivers/usb/musb/musb_debug.h
+++ b/drivers/usb/musb/musb_debug.h
@@ -48,11 +48,11 @@
                                 __func__, __LINE__ , ## args); \
         } } while (0)
 
-extern unsigned debug;
+extern unsigned musb_debug;
 
 static inline int _dbg_level(unsigned l)
 {
-        return debug >= l;
+        return musb_debug >= l;
 }
 
 #define DBG(level, fmt, args...) xprintk(level, KERN_DEBUG, fmt, ## args)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 3133990f04ec..e45e70bcc5e2 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -378,6 +378,19 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
 
                 switch (qh->type) {
 
+                case USB_ENDPOINT_XFER_CONTROL:
+                case USB_ENDPOINT_XFER_BULK:
+                        /* fifo policy for these lists, except that NAKing
+                         * should rotate a qh to the end (for fairness).
+                         */
+                        if (qh->mux == 1) {
+                                head = qh->ring.prev;
+                                list_del(&qh->ring);
+                                kfree(qh);
+                                qh = first_qh(head);
+                                break;
+                        }
+
                 case USB_ENDPOINT_XFER_ISOC:
                 case USB_ENDPOINT_XFER_INT:
                         /* this is where periodic bandwidth should be
@@ -388,17 +401,6 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
                         kfree(qh);
                         qh = NULL;
                         break;
-
-                case USB_ENDPOINT_XFER_CONTROL:
-                case USB_ENDPOINT_XFER_BULK:
-                        /* fifo policy for these lists, except that NAKing
-                         * should rotate a qh to the end (for fairness).
-                         */
-                        head = qh->ring.prev;
-                        list_del(&qh->ring);
-                        kfree(qh);
-                        qh = first_qh(head);
-                        break;
                 }
         }
         return qh;
@@ -1507,10 +1509,29 @@ void musb_host_rx(struct musb *musb, u8 epnum)
                 musb_writew(hw_ep->regs, MUSB_RXCSR, val);
 
 #ifdef CONFIG_USB_INVENTRA_DMA
+                if (usb_pipeisoc(pipe)) {
+                        struct usb_iso_packet_descriptor *d;
+
+                        d = urb->iso_frame_desc + qh->iso_idx;
+                        d->actual_length = xfer_len;
+
+                        /* even if there was an error, we did the dma
+                         * for iso_frame_desc->length
+                         */
+                        if (d->status != EILSEQ && d->status != -EOVERFLOW)
+                                d->status = 0;
+
+                        if (++qh->iso_idx >= urb->number_of_packets)
+                                done = true;
+                        else
+                                done = false;
+
+                } else  {
                 /* done if urb buffer is full or short packet is recd */
                 done = (urb->actual_length + xfer_len >=
                                 urb->transfer_buffer_length
                         || dma->actual_len < qh->maxpacket);
+                }
 
                 /* send IN token for next packet, without AUTOREQ */
                 if (!done) {
@@ -1547,7 +1568,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
                 if (dma) {
                         struct dma_controller   *c;
                         u16                     rx_count;
-                        int                     ret;
+                        int                     ret, length;
+                        dma_addr_t              buf;
 
                         rx_count = musb_readw(epio, MUSB_RXCOUNT);
 
@@ -1560,6 +1582,35 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 
                         c = musb->dma_controller;
 
+                        if (usb_pipeisoc(pipe)) {
+                                int status = 0;
+                                struct usb_iso_packet_descriptor *d;
+
+                                d = urb->iso_frame_desc + qh->iso_idx;
+
+                                if (iso_err) {
+                                        status = -EILSEQ;
+                                        urb->error_count++;
+                                }
+                                if (rx_count > d->length) {
+                                        if (status == 0) {
+                                                status = -EOVERFLOW;
+                                                urb->error_count++;
+                                        }
+                                        DBG(2, "** OVERFLOW %d into %d\n",\
+                                            rx_count, d->length);
+
+                                        length = d->length;
+                                } else
+                                        length = rx_count;
+                                d->status = status;
+                                buf = urb->transfer_dma + d->offset;
+                        } else {
+                                length = rx_count;
+                                buf = urb->transfer_dma +
+                                                urb->actual_length;
+                        }
+
                         dma->desired_mode = 0;
 #ifdef USE_MODE1
                         /* because of the issue below, mode 1 will
@@ -1571,6 +1622,12 @@ void musb_host_rx(struct musb *musb, u8 epnum)
                                                 urb->actual_length)
                                         > qh->maxpacket)
                                 dma->desired_mode = 1;
+                        if (rx_count < hw_ep->max_packet_sz_rx) {
+                                length = rx_count;
+                                dma->bDesiredMode = 0;
+                        } else {
+                                length = urb->transfer_buffer_length;
+                        }
 #endif
 
 /* Disadvantage of using mode 1:
@@ -1608,12 +1665,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
                          */
                         ret = c->channel_program(
                                 dma, qh->maxpacket,
-                                dma->desired_mode,
-                                urb->transfer_dma
-                                        + urb->actual_length,
-                                (dma->desired_mode == 0)
-                                        ? rx_count
-                                        : urb->transfer_buffer_length);
+                                dma->desired_mode, buf, length);
 
                         if (!ret) {
                                 c->channel_release(dma);
@@ -1631,19 +1683,6 @@ void musb_host_rx(struct musb *musb, u8 epnum)
                 }
         }
 
-        if (dma && usb_pipeisoc(pipe)) {
-                struct usb_iso_packet_descriptor        *d;
-                int                                     iso_stat = status;
-
-                d = urb->iso_frame_desc + qh->iso_idx;
-                d->actual_length += xfer_len;
-                if (iso_err) {
-                        iso_stat = -EILSEQ;
-                        urb->error_count++;
-                }
-                d->status = iso_stat;
-        }
-
 finish:
         urb->actual_length += xfer_len;
         qh->offset += xfer_len;
@@ -1671,22 +1710,9 @@ static int musb_schedule(
         struct list_head        *head = NULL;
 
         /* use fixed hardware for control and bulk */
-        switch (qh->type) {
-        case USB_ENDPOINT_XFER_CONTROL:
+        if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
                 head = &musb->control;
                 hw_ep = musb->control_ep;
-                break;
-        case USB_ENDPOINT_XFER_BULK:
-                hw_ep = musb->bulk_ep;
-                if (is_in)
-                        head = &musb->in_bulk;
-                else
-                        head = &musb->out_bulk;
-                break;
-        }
-        if (head) {
-                idle = list_empty(head);
-                list_add_tail(&qh->ring, head);
                 goto success;
         }
 
@@ -1725,19 +1751,34 @@ static int musb_schedule(
                 else
                         diff = hw_ep->max_packet_sz_tx - qh->maxpacket;
 
-                if (diff > 0 && best_diff > diff) {
+                if (diff >= 0 && best_diff > diff) {
                         best_diff = diff;
                         best_end = epnum;
                 }
         }
-        if (best_end < 0)
+        /* use bulk reserved ep1 if no other ep is free */
+        if (best_end > 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
+                hw_ep = musb->bulk_ep;
+                if (is_in)
+                        head = &musb->in_bulk;
+                else
+                        head = &musb->out_bulk;
+                goto success;
+        } else if (best_end < 0) {
                 return -ENOSPC;
+        }
 
         idle = 1;
+        qh->mux = 0;
         hw_ep = musb->endpoints + best_end;
         musb->periodic[best_end] = qh;
         DBG(4, "qh %p periodic slot %d\n", qh, best_end);
 success:
+        if (head) {
+                idle = list_empty(head);
+                list_add_tail(&qh->ring, head);
+                qh->mux = 1;
+        }
         qh->hw_ep = hw_ep;
         qh->hep->hcpriv = qh;
         if (idle)
@@ -2015,11 +2056,13 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
                         sched = &musb->control;
                         break;
                 case USB_ENDPOINT_XFER_BULK:
-                        if (usb_pipein(urb->pipe))
-                                sched = &musb->in_bulk;
-                        else
-                                sched = &musb->out_bulk;
-                        break;
+                        if (qh->mux == 1) {
+                                if (usb_pipein(urb->pipe))
+                                        sched = &musb->in_bulk;
+                                else
+                                        sched = &musb->out_bulk;
+                                break;
+                        }
                 default:
                         /* REVISIT when we get a schedule tree, periodic
                          * transfers won't always be at the head of a
@@ -2067,11 +2110,13 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
                 sched = &musb->control;
                 break;
         case USB_ENDPOINT_XFER_BULK:
-                if (is_in)
-                        sched = &musb->in_bulk;
-                else
-                        sched = &musb->out_bulk;
-                break;
+                if (qh->mux == 1) {
+                        if (is_in)
+                                sched = &musb->in_bulk;
+                        else
+                                sched = &musb->out_bulk;
+                        break;
+                }
         default:
                 /* REVISIT when we get a schedule tree, periodic transfers
                  * won't always be at the head of a singleton queue...
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 77bcdb9d5b32..0b7fbcd21963 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -53,6 +53,7 @@ struct musb_qh {
 
         struct list_head        ring;           /* of musb_qh */
         /* struct musb_qh               *next; */       /* for periodic tree */
+        u8                      mux;            /* qh multiplexed to hw_ep */
 
         unsigned                offset;         /* in urb->transfer_buffer */
         unsigned                segsize;        /* current xfer fragment */
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 9d2dcb121c5e..ce6c162920f7 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -53,7 +53,9 @@ static void musb_do_idle(unsigned long _musb)
 {
         struct musb     *musb = (void *)_musb;
         unsigned long   flags;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
         u8      power;
+#endif
         u8      devctl;
 
         devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index b73b036f3d77..ee8fca92a4ac 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -605,7 +605,7 @@ void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 
         if (musb->board_mode != MUSB_OTG) {
                 ERR("Changing mode currently only supported in OTG mode\n");
-                return;
+                return -EINVAL;
         }
 
         otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 8008d0bc80ad..9035d7256b03 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -67,6 +67,7 @@ static struct usb_device_id id_table [] = {
         { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
         { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
         { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
+        { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
         { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
         { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
         { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
@@ -85,6 +86,7 @@ static struct usb_device_id id_table [] = {
         { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
         { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
         { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
+        { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
         { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
         { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
         { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index b679a556b98d..4e2cda93da59 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -26,7 +26,7 @@
  *      Introduced common header to be used also in USB Gadget Framework.
  *      Still needs some other style fixes.
  *
- * 2007_Jun_21  Alan Cox <alan@redhat.com>
+ * 2007_Jun_21  Alan Cox <alan@lxorguk.ukuu.org.uk>
  *      Minimal cleanups for some of the driver problens and tty layer abuse.
  *      Still needs fixing to allow multiple dongles.
  *
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index bd07eaa300b9..6fa1ec441b61 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -160,6 +160,11 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 
 #define NOVATELWIRELESS_VENDOR_ID               0x1410
 
+/* YISO PRODUCTS */
+
+#define YISO_VENDOR_ID                          0x0EAB
+#define YISO_PRODUCT_U893                       0xC893
+
 /* MERLIN EVDO PRODUCTS */
 #define NOVATELWIRELESS_PRODUCT_V640            0x1100
 #define NOVATELWIRELESS_PRODUCT_V620            0x1110
@@ -408,6 +413,7 @@ static struct usb_device_id option_ids[] = {
         { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
         { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
         { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
+        { USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
         { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
         { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
         { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004) },
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 3d9249632ae1..c68b738900bd 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -2,8 +2,8 @@
 # USB Storage driver configuration
 #
 
-comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'"
-comment "may also be needed; see USB_STORAGE Help for more information"
+comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;"
+comment "see USB_STORAGE Help for more information"
         depends on USB
 
 config USB_STORAGE
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index fb9e20e624c1..d4e5fc86e43c 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -253,6 +253,14 @@ UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0591,
         US_SC_DEVICE, US_PR_DEVICE, NULL,
         US_FL_FIX_CAPACITY ),
 
+/* Submitted by Ricky Wong Yung Fei <evilbladewarrior@gmail.com> */
+/* Nokia 7610 Supernova - Too many sectors reported in usb storage mode */
+UNUSUAL_DEV(  0x0421, 0x00f5, 0x0000, 0x0470,
+        "Nokia",
+        "7610 Supernova",
+        US_SC_DEVICE, US_PR_DEVICE, NULL,
+        US_FL_FIX_CAPACITY ),
+
 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
 UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
                 "SMSC",
@@ -418,6 +426,13 @@ UNUSUAL_DEV(  0x04b0, 0x0417, 0x0100, 0x0100,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_CAPACITY),
 
+/* Reported by paul ready <lxtwin@homecall.co.uk> */
+UNUSUAL_DEV(  0x04b0, 0x0419, 0x0100, 0x0200,
+                "NIKON",
+                "NIKON DSC D300",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY),
+
 /* Reported by Doug Maxey (dwm@austin.ibm.com) */
 UNUSUAL_DEV(  0x04b3, 0x4001, 0x0110, 0x0110,
                 "IBM",
@@ -1258,6 +1273,13 @@ UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_INQUIRY),
 
+/* Reported by Luciano Rocha <luciano@eurotux.com> */
+UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001,
+                "Argosy",
+                "Storage",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY),
+
 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Flag will support Bulk devices which use a standards-violating 32-byte
  * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index c4493091c655..a14d5b6e4c7c 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -52,5 +52,12 @@ config W1_MASTER_GPIO
           This support is also available as a module.  If so, the module
           will be called w1-gpio.ko.
 
+config HDQ_MASTER_OMAP
+        tristate "OMAP HDQ driver"
+        depends on ARCH_OMAP2430 || ARCH_OMAP34XX
+        help
+          Say Y here if you want support for the 1-wire or HDQ Interface
+          on an OMAP processor.
+
 endmenu
 
diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile
index 1420b5bbdda8..bc4714a75f3a 100644
--- a/drivers/w1/masters/Makefile
+++ b/drivers/w1/masters/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_W1_MASTER_DS2490)		+= ds2490.o
 obj-$(CONFIG_W1_MASTER_DS2482)          += ds2482.o
 obj-$(CONFIG_W1_MASTER_DS1WM)           += ds1wm.o
 obj-$(CONFIG_W1_MASTER_GPIO)            += w1-gpio.o
+obj-$(CONFIG_HDQ_MASTER_OMAP)           += omap_hdq.o
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
new file mode 100644
index 000000000000..1295625c4825
--- /dev/null
+++ b/drivers/w1/masters/omap_hdq.c
@@ -0,0 +1,725 @@
+/*
+ * drivers/w1/masters/omap_hdq.c
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+
+#define MOD_NAME        "OMAP_HDQ:"
+
+#define OMAP_HDQ_REVISION                       0x00
+#define OMAP_HDQ_TX_DATA                        0x04
+#define OMAP_HDQ_RX_DATA                        0x08
+#define OMAP_HDQ_CTRL_STATUS                    0x0c
+#define OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK      (1<<6)
+#define OMAP_HDQ_CTRL_STATUS_CLOCKENABLE        (1<<5)
+#define OMAP_HDQ_CTRL_STATUS_GO                 (1<<4)
+#define OMAP_HDQ_CTRL_STATUS_INITIALIZATION     (1<<2)
+#define OMAP_HDQ_CTRL_STATUS_DIR                (1<<1)
+#define OMAP_HDQ_CTRL_STATUS_MODE               (1<<0)
+#define OMAP_HDQ_INT_STATUS                     0x10
+#define OMAP_HDQ_INT_STATUS_TXCOMPLETE          (1<<2)
+#define OMAP_HDQ_INT_STATUS_RXCOMPLETE          (1<<1)
+#define OMAP_HDQ_INT_STATUS_TIMEOUT             (1<<0)
+#define OMAP_HDQ_SYSCONFIG                      0x14
+#define OMAP_HDQ_SYSCONFIG_SOFTRESET            (1<<1)
+#define OMAP_HDQ_SYSCONFIG_AUTOIDLE             (1<<0)
+#define OMAP_HDQ_SYSSTATUS                      0x18
+#define OMAP_HDQ_SYSSTATUS_RESETDONE            (1<<0)
+
+#define OMAP_HDQ_FLAG_CLEAR                     0
+#define OMAP_HDQ_FLAG_SET                       1
+#define OMAP_HDQ_TIMEOUT                        (HZ/5)
+
+#define OMAP_HDQ_MAX_USER                       4
+
+static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue);
+static int w1_id;
+
+struct hdq_data {
+        struct device           *dev;
+        void __iomem            *hdq_base;
+        /* lock status update */
+        struct  mutex           hdq_mutex;
+        int                     hdq_usecount;
+        struct  clk             *hdq_ick;
+        struct  clk             *hdq_fck;
+        u8                      hdq_irqstatus;
+        /* device lock */
+        spinlock_t              hdq_spinlock;
+        /*
+         * Used to control the call to omap_hdq_get and omap_hdq_put.
+         * HDQ Protocol: Write the CMD|REG_address first, followed by
+         * the data wrire or read.
+         */
+        int                     init_trans;
+};
+
+static int __init omap_hdq_probe(struct platform_device *pdev);
+static int omap_hdq_remove(struct platform_device *pdev);
+
+static struct platform_driver omap_hdq_driver = {
+        .probe =        omap_hdq_probe,
+        .remove =       omap_hdq_remove,
+        .driver =       {
+                .name = "omap_hdq",
+        },
+};
+
+static u8 omap_w1_read_byte(void *_hdq);
+static void omap_w1_write_byte(void *_hdq, u8 byte);
+static u8 omap_w1_reset_bus(void *_hdq);
+static void omap_w1_search_bus(void *_hdq, u8 search_type,
+        w1_slave_found_callback slave_found);
+
+
+static struct w1_bus_master omap_w1_master = {
+        .read_byte      = omap_w1_read_byte,
+        .write_byte     = omap_w1_write_byte,
+        .reset_bus      = omap_w1_reset_bus,
+        .search         = omap_w1_search_bus,
+};
+
+/* HDQ register I/O routines */
+static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset)
+{
+        return __raw_readb(hdq_data->hdq_base + offset);
+}
+
+static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val)
+{
+        __raw_writeb(val, hdq_data->hdq_base + offset);
+}
+
+static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset,
+                        u8 val, u8 mask)
+{
+        u8 new_val = (__raw_readb(hdq_data->hdq_base + offset) & ~mask)
+                        | (val & mask);
+        __raw_writeb(new_val, hdq_data->hdq_base + offset);
+
+        return new_val;
+}
+
+/*
+ * Wait for one or more bits in flag change.
+ * HDQ_FLAG_SET: wait until any bit in the flag is set.
+ * HDQ_FLAG_CLEAR: wait until all bits in the flag are cleared.
+ * return 0 on success and -ETIMEDOUT in the case of timeout.
+ */
+static int hdq_wait_for_flag(struct hdq_data *hdq_data, u32 offset,
+                u8 flag, u8 flag_set, u8 *status)
+{
+        int ret = 0;
+        unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT;
+
+        if (flag_set == OMAP_HDQ_FLAG_CLEAR) {
+                /* wait for the flag clear */
+                while (((*status = hdq_reg_in(hdq_data, offset)) & flag)
+                        && time_before(jiffies, timeout)) {
+                        schedule_timeout_uninterruptible(1);
+                }
+                if (*status & flag)
+                        ret = -ETIMEDOUT;
+        } else if (flag_set == OMAP_HDQ_FLAG_SET) {
+                /* wait for the flag set */
+                while (!((*status = hdq_reg_in(hdq_data, offset)) & flag)
+                        && time_before(jiffies, timeout)) {
+                        schedule_timeout_uninterruptible(1);
+                }
+                if (!(*status & flag))
+                        ret = -ETIMEDOUT;
+        } else
+                return -EINVAL;
+
+        return ret;
+}
+
+/* write out a byte and fill *status with HDQ_INT_STATUS */
+static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status)
+{
+        int ret;
+        u8 tmp_status;
+        unsigned long irqflags;
+
+        *status = 0;
+
+        spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+        /* clear interrupt flags via a dummy read */
+        hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+        /* ISR loads it with new INT_STATUS */
+        hdq_data->hdq_irqstatus = 0;
+        spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+
+        hdq_reg_out(hdq_data, OMAP_HDQ_TX_DATA, val);
+
+        /* set the GO bit */
+        hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_GO,
+                OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO);
+        /* wait for the TXCOMPLETE bit */
+        ret = wait_event_timeout(hdq_wait_queue,
+                hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT);
+        if (ret == 0) {
+                dev_dbg(hdq_data->dev, "TX wait elapsed\n");
+                goto out;
+        }
+
+        *status = hdq_data->hdq_irqstatus;
+        /* check irqstatus */
+        if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) {
+                dev_dbg(hdq_data->dev, "timeout waiting for"
+                        "TXCOMPLETE/RXCOMPLETE, %x", *status);
+                ret = -ETIMEDOUT;
+                goto out;
+        }
+
+        /* wait for the GO bit return to zero */
+        ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                        OMAP_HDQ_CTRL_STATUS_GO,
+                        OMAP_HDQ_FLAG_CLEAR, &tmp_status);
+        if (ret) {
+                dev_dbg(hdq_data->dev, "timeout waiting GO bit"
+                        "return to zero, %x", tmp_status);
+        }
+
+out:
+        return ret;
+}
+
+/* HDQ Interrupt service routine */
+static irqreturn_t hdq_isr(int irq, void *_hdq)
+{
+        struct hdq_data *hdq_data = _hdq;
+        unsigned long irqflags;
+
+        spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+        hdq_data->hdq_irqstatus = hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+        spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+        dev_dbg(hdq_data->dev, "hdq_isr: %x", hdq_data->hdq_irqstatus);
+
+        if (hdq_data->hdq_irqstatus &
+                (OMAP_HDQ_INT_STATUS_TXCOMPLETE | OMAP_HDQ_INT_STATUS_RXCOMPLETE
+                | OMAP_HDQ_INT_STATUS_TIMEOUT)) {
+                /* wake up sleeping process */
+                wake_up(&hdq_wait_queue);
+        }
+
+        return IRQ_HANDLED;
+}
+
+/* HDQ Mode: always return success */
+static u8 omap_w1_reset_bus(void *_hdq)
+{
+        return 0;
+}
+
+/* W1 search callback function */
+static void omap_w1_search_bus(void *_hdq, u8 search_type,
+        w1_slave_found_callback slave_found)
+{
+        u64 module_id, rn_le, cs, id;
+
+        if (w1_id)
+                module_id = w1_id;
+        else
+                module_id = 0x1;
+
+        rn_le = cpu_to_le64(module_id);
+        /*
+         * HDQ might not obey truly the 1-wire spec.
+         * So calculate CRC based on module parameter.
+         */
+        cs = w1_calc_crc8((u8 *)&rn_le, 7);
+        id = (cs << 56) | module_id;
+
+        slave_found(_hdq, id);
+}
+
+static int _omap_hdq_reset(struct hdq_data *hdq_data)
+{
+        int ret;
+        u8 tmp_status;
+
+        hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, OMAP_HDQ_SYSCONFIG_SOFTRESET);
+        /*
+         * Select HDQ mode & enable clocks.
+         * It is observed that INT flags can't be cleared via a read and GO/INIT
+         * won't return to zero if interrupt is disabled. So we always enable
+         * interrupt.
+         */
+        hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+                OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+
+        /* wait for reset to complete */
+        ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS,
+                OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status);
+        if (ret)
+                dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x",
+                                tmp_status);
+        else {
+                hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                        OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+                        OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+                hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
+                        OMAP_HDQ_SYSCONFIG_AUTOIDLE);
+        }
+
+        return ret;
+}
+
+/* Issue break pulse to the device */
+static int omap_hdq_break(struct hdq_data *hdq_data)
+{
+        int ret = 0;
+        u8 tmp_status;
+        unsigned long irqflags;
+
+        ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+        if (ret < 0) {
+                dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                ret = -EINTR;
+                goto rtn;
+        }
+
+        spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+        /* clear interrupt flags via a dummy read */
+        hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+        /* ISR loads it with new INT_STATUS */
+        hdq_data->hdq_irqstatus = 0;
+        spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+
+        /* set the INIT and GO bit */
+        hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO,
+                OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_INITIALIZATION |
+                OMAP_HDQ_CTRL_STATUS_GO);
+
+        /* wait for the TIMEOUT bit */
+        ret = wait_event_timeout(hdq_wait_queue,
+                hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT);
+        if (ret == 0) {
+                dev_dbg(hdq_data->dev, "break wait elapsed\n");
+                ret = -EINTR;
+                goto out;
+        }
+
+        tmp_status = hdq_data->hdq_irqstatus;
+        /* check irqstatus */
+        if (!(tmp_status & OMAP_HDQ_INT_STATUS_TIMEOUT)) {
+                dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x",
+                                tmp_status);
+                ret = -ETIMEDOUT;
+                goto out;
+        }
+        /*
+         * wait for both INIT and GO bits rerurn to zero.
+         * zero wait time expected for interrupt mode.
+         */
+        ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                        OMAP_HDQ_CTRL_STATUS_INITIALIZATION |
+                        OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_FLAG_CLEAR,
+                        &tmp_status);
+        if (ret)
+                dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits"
+                        "return to zero, %x", tmp_status);
+
+out:
+        mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+        return ret;
+}
+
+static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
+{
+        int ret = 0;
+        u8 status;
+        unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT;
+
+        ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+        if (ret < 0) {
+                ret = -EINTR;
+                goto rtn;
+        }
+
+        if (!hdq_data->hdq_usecount) {
+                ret = -EINVAL;
+                goto out;
+        }
+
+        if (!(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) {
+                hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                        OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO,
+                        OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO);
+                /*
+                 * The RX comes immediately after TX. It
+                 * triggers another interrupt before we
+                 * sleep. So we have to wait for RXCOMPLETE bit.
+                 */
+                while (!(hdq_data->hdq_irqstatus
+                        & OMAP_HDQ_INT_STATUS_RXCOMPLETE)
+                        && time_before(jiffies, timeout)) {
+                        schedule_timeout_uninterruptible(1);
+                }
+                hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0,
+                        OMAP_HDQ_CTRL_STATUS_DIR);
+                status = hdq_data->hdq_irqstatus;
+                /* check irqstatus */
+                if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) {
+                        dev_dbg(hdq_data->dev, "timeout waiting for"
+                                "RXCOMPLETE, %x", status);
+                        ret = -ETIMEDOUT;
+                        goto out;
+                }
+        }
+        /* the data is ready. Read it in! */
+        *val = hdq_reg_in(hdq_data, OMAP_HDQ_RX_DATA);
+out:
+        mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+        return 0;
+
+}
+
+/* Enable clocks and set the controller to HDQ mode */
+static int omap_hdq_get(struct hdq_data *hdq_data)
+{
+        int ret = 0;
+
+        ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+        if (ret < 0) {
+                ret = -EINTR;
+                goto rtn;
+        }
+
+        if (OMAP_HDQ_MAX_USER == hdq_data->hdq_usecount) {
+                dev_dbg(hdq_data->dev, "attempt to exceed the max use count");
+                ret = -EINVAL;
+                goto out;
+        } else {
+                hdq_data->hdq_usecount++;
+                try_module_get(THIS_MODULE);
+                if (1 == hdq_data->hdq_usecount) {
+                        if (clk_enable(hdq_data->hdq_ick)) {
+                                dev_dbg(hdq_data->dev, "Can not enable ick\n");
+                                ret = -ENODEV;
+                                goto clk_err;
+                        }
+                        if (clk_enable(hdq_data->hdq_fck)) {
+                                dev_dbg(hdq_data->dev, "Can not enable fck\n");
+                                clk_disable(hdq_data->hdq_ick);
+                                ret = -ENODEV;
+                                goto clk_err;
+                        }
+
+                        /* make sure HDQ is out of reset */
+                        if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) &
+                                OMAP_HDQ_SYSSTATUS_RESETDONE)) {
+                                ret = _omap_hdq_reset(hdq_data);
+                                if (ret)
+                                        /* back up the count */
+                                        hdq_data->hdq_usecount--;
+                        } else {
+                                /* select HDQ mode & enable clocks */
+                                hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                                        OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+                                        OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+                                hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
+                                        OMAP_HDQ_SYSCONFIG_AUTOIDLE);
+                                hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+                        }
+                }
+        }
+
+clk_err:
+        clk_put(hdq_data->hdq_ick);
+        clk_put(hdq_data->hdq_fck);
+out:
+        mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+        return ret;
+}
+
+/* Disable clocks to the module */
+static int omap_hdq_put(struct hdq_data *hdq_data)
+{
+        int ret = 0;
+
+        ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+        if (ret < 0)
+                return -EINTR;
+
+        if (0 == hdq_data->hdq_usecount) {
+                dev_dbg(hdq_data->dev, "attempt to decrement use count"
+                        "when it is zero");
+                ret = -EINVAL;
+        } else {
+                hdq_data->hdq_usecount--;
+                module_put(THIS_MODULE);
+                if (0 == hdq_data->hdq_usecount) {
+                        clk_disable(hdq_data->hdq_ick);
+                        clk_disable(hdq_data->hdq_fck);
+                }
+        }
+        mutex_unlock(&hdq_data->hdq_mutex);
+
+        return ret;
+}
+
+/* Read a byte of data from the device */
+static u8 omap_w1_read_byte(void *_hdq)
+{
+        struct hdq_data *hdq_data = _hdq;
+        u8 val = 0;
+        int ret;
+
+        ret = hdq_read_byte(hdq_data, &val);
+        if (ret) {
+                ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+                if (ret < 0) {
+                        dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                        return -EINTR;
+                }
+                hdq_data->init_trans = 0;
+                mutex_unlock(&hdq_data->hdq_mutex);
+                omap_hdq_put(hdq_data);
+                return -1;
+        }
+
+        /* Write followed by a read, release the module */
+        if (hdq_data->init_trans) {
+                ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+                if (ret < 0) {
+                        dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                        return -EINTR;
+                }
+                hdq_data->init_trans = 0;
+                mutex_unlock(&hdq_data->hdq_mutex);
+                omap_hdq_put(hdq_data);
+        }
+
+        return val;
+}
+
+/* Write a byte of data to the device */
+static void omap_w1_write_byte(void *_hdq, u8 byte)
+{
+        struct hdq_data *hdq_data = _hdq;
+        int ret;
+        u8 status;
+
+        /* First write to initialize the transfer */
+        if (hdq_data->init_trans == 0)
+                omap_hdq_get(hdq_data);
+
+        ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+        if (ret < 0) {
+                dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                return;
+        }
+        hdq_data->init_trans++;
+        mutex_unlock(&hdq_data->hdq_mutex);
+
+        ret = hdq_write_byte(hdq_data, byte, &status);
+        if (ret == 0) {
+                dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status);
+                return;
+        }
+
+        /* Second write, data transfered. Release the module */
+        if (hdq_data->init_trans > 1) {
+                omap_hdq_put(hdq_data);
+                ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+                if (ret < 0) {
+                        dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                        return;
+                }
+                hdq_data->init_trans = 0;
+                mutex_unlock(&hdq_data->hdq_mutex);
+        }
+
+        return;
+}
+
+static int __init omap_hdq_probe(struct platform_device *pdev)
+{
+        struct hdq_data *hdq_data;
+        struct resource *res;
+        int ret, irq;
+        u8 rev;
+
+        hdq_data = kmalloc(sizeof(*hdq_data), GFP_KERNEL);
+        if (!hdq_data) {
+                dev_dbg(&pdev->dev, "unable to allocate memory\n");
+                ret = -ENOMEM;
+                goto err_kmalloc;
+        }
+
+        hdq_data->dev = &pdev->dev;
+        platform_set_drvdata(pdev, hdq_data);
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res) {
+                dev_dbg(&pdev->dev, "unable to get resource\n");
+                ret = -ENXIO;
+                goto err_resource;
+        }
+
+        hdq_data->hdq_base = ioremap(res->start, SZ_4K);
+        if (!hdq_data->hdq_base) {
+                dev_dbg(&pdev->dev, "ioremap failed\n");
+                ret = -EINVAL;
+                goto err_ioremap;
+        }
+
+        /* get interface & functional clock objects */
+        hdq_data->hdq_ick = clk_get(&pdev->dev, "hdq_ick");
+        hdq_data->hdq_fck = clk_get(&pdev->dev, "hdq_fck");
+
+        if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) {
+                dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n");
+                if (IS_ERR(hdq_data->hdq_ick)) {
+                        ret = PTR_ERR(hdq_data->hdq_ick);
+                        goto err_clk;
+                }
+                if (IS_ERR(hdq_data->hdq_fck)) {
+                        ret = PTR_ERR(hdq_data->hdq_fck);
+                        clk_put(hdq_data->hdq_ick);
+                        goto err_clk;
+                }
+        }
+
+        hdq_data->hdq_usecount = 0;
+        mutex_init(&hdq_data->hdq_mutex);
+
+        if (clk_enable(hdq_data->hdq_ick)) {
+                dev_dbg(&pdev->dev, "Can not enable ick\n");
+                ret = -ENODEV;
+                goto err_intfclk;
+        }
+
+        if (clk_enable(hdq_data->hdq_fck)) {
+                dev_dbg(&pdev->dev, "Can not enable fck\n");
+                ret = -ENODEV;
+                goto err_fnclk;
+        }
+
+        rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION);
+        dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n",
+                (rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt");
+
+        spin_lock_init(&hdq_data->hdq_spinlock);
+
+        irq = platform_get_irq(pdev, 0);
+        if (irq < 0) {
+                ret = -ENXIO;
+                goto err_irq;
+        }
+
+        ret = request_irq(irq, hdq_isr, IRQF_DISABLED, "omap_hdq", hdq_data);
+        if (ret < 0) {
+                dev_dbg(&pdev->dev, "could not request irq\n");
+                goto err_irq;
+        }
+
+        omap_hdq_break(hdq_data);
+
+        /* don't clock the HDQ until it is needed */
+        clk_disable(hdq_data->hdq_ick);
+        clk_disable(hdq_data->hdq_fck);
+
+        omap_w1_master.data = hdq_data;
+
+        ret = w1_add_master_device(&omap_w1_master);
+        if (ret) {
+                dev_dbg(&pdev->dev, "Failure in registering w1 master\n");
+                goto err_w1;
+        }
+
+        return 0;
+
+err_w1:
+err_irq:
+        clk_disable(hdq_data->hdq_fck);
+
+err_fnclk:
+        clk_disable(hdq_data->hdq_ick);
+
+err_intfclk:
+        clk_put(hdq_data->hdq_ick);
+        clk_put(hdq_data->hdq_fck);
+
+err_clk:
+        iounmap(hdq_data->hdq_base);
+
+err_ioremap:
+err_resource:
+        platform_set_drvdata(pdev, NULL);
+        kfree(hdq_data);
+
+err_kmalloc:
+        return ret;
+
+}
+
+static int omap_hdq_remove(struct platform_device *pdev)
+{
+        struct hdq_data *hdq_data = platform_get_drvdata(pdev);
+
+        mutex_lock(&hdq_data->hdq_mutex);
+
+        if (hdq_data->hdq_usecount) {
+                dev_dbg(&pdev->dev, "removed when use count is not zero\n");
+                return -EBUSY;
+        }
+
+        mutex_unlock(&hdq_data->hdq_mutex);
+
+        /* remove module dependency */
+        clk_put(hdq_data->hdq_ick);
+        clk_put(hdq_data->hdq_fck);
+        free_irq(INT_24XX_HDQ_IRQ, hdq_data);
+        platform_set_drvdata(pdev, NULL);
+        iounmap(hdq_data->hdq_base);
+        kfree(hdq_data);
+
+        return 0;
+}
+
+static int __init
+omap_hdq_init(void)
+{
+        return platform_driver_register(&omap_hdq_driver);
+}
+module_init(omap_hdq_init);
+
+static void __exit
+omap_hdq_exit(void)
+{
+        platform_driver_unregister(&omap_hdq_driver);
+}
+module_exit(omap_hdq_exit);
+
+module_param(w1_id, int, S_IRUSR);
+MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection");
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("HDQ driver Library");
+MODULE_LICENSE("GPL");
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 3df29a122f84..8d0b1fb1e52e 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -44,4 +44,11 @@ config W1_SLAVE_DS2760
 
           If you are unsure, say N.
 
+config W1_SLAVE_BQ27000
+        tristate "BQ27000 slave support"
+        depends on W1
+        help
+          Say Y here if you want to use a hdq
+          bq27000 slave support.
+
 endmenu
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index a8eb7524df1d..990f400b6d22 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -6,4 +6,4 @@ obj-$(CONFIG_W1_SLAVE_THERM)	+= w1_therm.o
 obj-$(CONFIG_W1_SLAVE_SMEM)     += w1_smem.o
 obj-$(CONFIG_W1_SLAVE_DS2433)   += w1_ds2433.o
 obj-$(CONFIG_W1_SLAVE_DS2760)   += w1_ds2760.o
-
+obj-$(CONFIG_W1_SLAVE_BQ27000)  += w1_bq27000.o
diff --git a/drivers/w1/slaves/w1_bq27000.c b/drivers/w1/slaves/w1_bq27000.c
new file mode 100644
index 000000000000..8f4c91f6c680
--- /dev/null
+++ b/drivers/w1/slaves/w1_bq27000.c
@@ -0,0 +1,123 @@
+/*
+ * drivers/w1/slaves/w1_bq27000.c
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_family.h"
+
+#define HDQ_CMD_READ    (0)
+#define HDQ_CMD_WRITE   (1<<7)
+
+static int F_ID;
+
+void w1_bq27000_write(struct device *dev, u8 buf, u8 reg)
+{
+        struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+        if (!dev) {
+                pr_info("Could not obtain slave dev ptr\n");
+                return;
+        }
+
+        w1_write_8(sl->master, HDQ_CMD_WRITE | reg);
+        w1_write_8(sl->master, buf);
+}
+EXPORT_SYMBOL(w1_bq27000_write);
+
+int w1_bq27000_read(struct device *dev, u8 reg)
+{
+        u8 val;
+        struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+        if (!dev)
+                return 0;
+
+        w1_write_8(sl->master, HDQ_CMD_READ | reg);
+        val = w1_read_8(sl->master);
+
+        return val;
+}
+EXPORT_SYMBOL(w1_bq27000_read);
+
+static int w1_bq27000_add_slave(struct w1_slave *sl)
+{
+        int ret;
+        int id = 1;
+        struct platform_device *pdev;
+
+        pdev = platform_device_alloc("bq27000-battery", id);
+        if (!pdev) {
+                ret = -ENOMEM;
+                return ret;
+        }
+        pdev->dev.parent = &sl->dev;
+
+        ret = platform_device_add(pdev);
+        if (ret)
+                goto pdev_add_failed;
+
+        dev_set_drvdata(&sl->dev, pdev);
+
+        goto success;
+
+pdev_add_failed:
+        platform_device_unregister(pdev);
+success:
+        return ret;
+}
+
+static void w1_bq27000_remove_slave(struct w1_slave *sl)
+{
+        struct platform_device *pdev = dev_get_drvdata(&sl->dev);
+
+        platform_device_unregister(pdev);
+}
+
+static struct w1_family_ops w1_bq27000_fops = {
+        .add_slave      = w1_bq27000_add_slave,
+        .remove_slave   = w1_bq27000_remove_slave,
+};
+
+static struct w1_family w1_bq27000_family = {
+        .fid = 1,
+        .fops = &w1_bq27000_fops,
+};
+
+static int __init w1_bq27000_init(void)
+{
+        if (F_ID)
+                w1_bq27000_family.fid = F_ID;
+
+        return w1_register_family(&w1_bq27000_family);
+}
+
+static void __exit w1_bq27000_exit(void)
+{
+        w1_unregister_family(&w1_bq27000_family);
+}
+
+
+module_init(w1_bq27000_init);
+module_exit(w1_bq27000_exit);
+
+module_param(F_ID, int, S_IRUSR);
+MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ device");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments Ltd");
+MODULE_DESCRIPTION("HDQ/1-wire slave driver bq27000 battery monitor chip");
diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h
index cdaa6fffbfc7..97304bd83ec9 100644
--- a/drivers/w1/w1.h
+++ b/drivers/w1/w1.h
@@ -206,6 +206,7 @@ void w1_slave_detach(struct w1_slave *sl);
 
 u8 w1_triplet(struct w1_master *dev, int bdir);
 void w1_write_8(struct w1_master *, u8);
+u8 w1_read_8(struct w1_master *);
 int w1_reset_bus(struct w1_master *);
 u8 w1_calc_crc8(u8 *, int);
 void w1_write_block(struct w1_master *, const u8 *, int);
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index f4f82f1f486e..0d15b0eaf79a 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -217,7 +217,7 @@ u8 w1_triplet(struct w1_master *dev, int bdir)
  * @param dev     the master device
  * @return        the byte read
  */
-static u8 w1_read_8(struct w1_master * dev)
+u8 w1_read_8(struct w1_master *dev)
 {
         int i;
         u8 res = 0;
@@ -230,6 +230,7 @@ static u8 w1_read_8(struct w1_master * dev)
 
         return res;
 }
+EXPORT_SYMBOL_GPL(w1_read_8);
 
 /**
  * Writes a series of bytes.
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index c3b78a76f173..225398fd5049 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -42,8 +42,10 @@ u32 booke_wdt_period = WDT_PERIOD_DEFAULT;
 
 #ifdef  CONFIG_FSL_BOOKE
 #define WDTP(x)         ((((63-x)&0x3)<<30)|(((63-x)&0x3c)<<15))
+#define WDTP_MASK       (WDTP(0))
 #else
 #define WDTP(x)         (TCR_WP(x))
+#define WDTP_MASK       (TCR_WP_MASK)
 #endif
 
 static DEFINE_SPINLOCK(booke_wdt_lock);
@@ -65,6 +67,7 @@ static void __booke_wdt_enable(void *data)
         /* clear status before enabling watchdog */
         __booke_wdt_ping(NULL);
         val = mfspr(SPRN_TCR);
+        val &= ~WDTP_MASK;
         val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(booke_wdt_period));
 
         mtspr(SPRN_TCR, val);
@@ -114,7 +117,7 @@ static long booke_wdt_ioctl(struct file *file,
         case WDIOC_SETTIMEOUT:
                 if (get_user(booke_wdt_period, p))
                         return -EFAULT;
-                mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WDTP(0)) |
+                mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WDTP_MASK) |
                                                 WDTP(booke_wdt_period));
                 return 0;
         case WDIOC_GETTIMEOUT: