6 files changed, 7 insertions, 6 deletions

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 82710ae39228..5cb96300eb0f 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -256,7 +256,8 @@ config ACPI_CUSTOM_DSDT_FILE
         depends on ACPI_CUSTOM_DSDT
         default ""
         help
-          Enter the full path name to the file wich includes the AmlCode declaration.
+          Enter the full path name to the file which includes the AmlCode
+          declaration.
 
 config ACPI_BLACKLIST_YEAR
         int "Disable ACPI for systems before Jan 1st this year" if X86_32
diff --git a/drivers/isdn/i4l/isdn_x25iface.c b/drivers/isdn/i4l/isdn_x25iface.c
index edf14a2aa3c8..743ac4077f35 100644
--- a/drivers/isdn/i4l/isdn_x25iface.c
+++ b/drivers/isdn/i4l/isdn_x25iface.c
@@ -7,7 +7,7 @@
  *
  * stuff needed to support the Linux X.25 PLP code on top of devices that
  * can provide a lab_b service using the concap_proto mechanism.
- * This module supports a network interface wich provides lapb_sematics
+ * This module supports a network interface which provides lapb_sematics
  * -- as defined in Documentation/networking/x25-iface.txt -- to
  * the upper layer and assumes that the lower layer provides a reliable
  * data link service by means of the concap_device_ops callbacks.
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 928e6cf12dca..6459edc7f5c5 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -40,7 +40,7 @@
  * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
  * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
  * fpr the console code : without this 1:1 mapping, at early boot time, when we
- * are parsing the kernel args console=ttyPSC?, we wouldn't know wich PSC it
+ * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it
  * will be mapped to.
  */
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a8455c9e79dd..495db5755df9 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -102,7 +102,7 @@ static struct usb_driver option_driver = {
         .no_dynamic_id =        1,
 };
 
-/* The card has three separate interfaces, wich the serial driver
+/* The card has three separate interfaces, which the serial driver
  * recognizes separately, thus num_port=1.
  */
 static struct usb_serial_driver option_3port_device = {
diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
index 99921df35474..8c1a8b5135c6 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/sstfb.c
@@ -32,7 +32,7 @@
 
 -TODO: at one time or another test that the mode is acceptable by the monitor
 -ASK: Can I choose different ordering for the color bitfields (rgba argb ...)
-      wich one should i use ? is there any preferred one ? It seems ARGB is
+      which one should i use ? is there any preferred one ? It seems ARGB is
       the one ...
 -TODO: in  set_var check the validity of timings (hsync vsync)...
 -TODO: check and recheck the use of sst_wait_idle : we don't flush the fifo via
diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c
index 591809cbbb97..2788b8ca9bb1 100644
--- a/drivers/w1/masters/matrox_w1.c
+++ b/drivers/w1/masters/matrox_w1.c
@@ -98,7 +98,7 @@ static void matrox_w1_write_ddc_bit(void *, u8);
  *
  * Using tristate pins, since i can't find any open-drain pin in whole motherboard.
  * Unfortunately we can't connect to Intel's 82801xx IO controller
- * since we don't know motherboard schema, wich has pretty unused(may be not) GPIO.
+ * since we don't know motherboard schema, which has pretty unused(may be not) GPIO.
  *
  * I've heard that PIIX also has open drain pin.
  *