165 files changed, 1425 insertions, 4580 deletions
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index 2c8272dd93c4..610f9997a403 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -1,6 +1,6 @@
 # Makefile for the Linux device tree
-obj-y                   := core.o sys.o bus.o dd.o syscore.o \
+obj-y                   := core.o bus.o dd.o syscore.o \
                           driver.o class.o platform.o \
                           cpu.o firmware.o init.o map.o devres.o \
                           attribute_container.o transport_class.o \
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 4a67cc0c8b37..74dda4f697f9 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -632,6 +632,11 @@ static void klist_children_put(struct klist_node *n)
 * may be used for reference counting of @dev after calling this
 * function.
 *
+ * All fields in @dev must be initialized by the caller to 0, except
+ * for those explicitly set to some other value.  The simplest
+ * approach is to use kzalloc() to allocate the structure containing
+ * @dev.
+ *
 * NOTE: Use put_device() to give up your reference instead of freeing
 * @dev directly once you have called this function.
 */
@@ -930,6 +935,13 @@ int device_private_init(struct device *dev)
 * to the global and sibling lists for the device, then
 * adds it to the other relevant subsystems of the driver model.
 *
+ * Do not call this routine or device_register() more than once for
+ * any device structure.  The driver model core is not designed to work
+ * with devices that get unregistered and then spring back to life.
+ * (Among other things, it's very hard to guarantee that all references
+ * to the previous incarnation of @dev have been dropped.)  Allocate
+ * and register a fresh new struct device instead.
+ *
 * NOTE: _Never_ directly free @dev after calling this function, even
 * if it returned an error! Always use put_device() to give up your
 * reference instead.
@@ -1022,7 +1034,7 @@ int device_add(struct device *dev)
        device_pm_add(dev);
        /* Notify clients of device addition.  This call must come
-         * after dpm_sysf_add() and before kobject_uevent().
+         * after dpm_sysfs_add() and before kobject_uevent().
         */
        if (dev->bus)
                blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
@@ -1090,6 +1102,9 @@ name_error:
 * have a clearly defined need to use and refcount the device
 * before it is added to the hierarchy.
 *
+ * For more information, see the kerneldoc for device_initialize()
+ * and device_add().
+ *
 * NOTE: _Never_ directly free @dev after calling this function, even
 * if it returned an error! Always use put_device() to give up the
 * reference initialized in this function instead.
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
deleted file mode 100644
index 409f5ce78829..000000000000
--- a/drivers/base/sys.c
+++ /dev/null
@@ -1,383 +0,0 @@
-/*
- * sys.c - pseudo-bus for system 'devices' (cpus, PICs, timers, etc)
- *
- * Copyright (c) 2002-3 Patrick Mochel
- *               2002-3 Open Source Development Lab
- *
- * This file is released under the GPLv2
- *
- * This exports a 'system' bus type.
- * By default, a 'sys' bus gets added to the root of the system. There will
- * always be core system devices. Devices can use sysdev_register() to
- * add themselves as children of the system bus.
- */
-#include <linux/sysdev.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/pm.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/interrupt.h>
-#include "base.h"
-#define to_sysdev(k) container_of(k, struct sys_device, kobj)
-#define to_sysdev_attr(a) container_of(a, struct sysdev_attribute, attr)
-static ssize_t
-sysdev_show(struct kobject *kobj, struct attribute *attr, char *buffer)
-{
-        struct sys_device *sysdev = to_sysdev(kobj);
-        struct sysdev_attribute *sysdev_attr = to_sysdev_attr(attr);
-        if (sysdev_attr->show)
-                return sysdev_attr->show(sysdev, sysdev_attr, buffer);
-        return -EIO;
-}
-static ssize_t
-sysdev_store(struct kobject *kobj, struct attribute *attr,
-             const char *buffer, size_t count)
-{
-        struct sys_device *sysdev = to_sysdev(kobj);
-        struct sysdev_attribute *sysdev_attr = to_sysdev_attr(attr);
-        if (sysdev_attr->store)
-                return sysdev_attr->store(sysdev, sysdev_attr, buffer, count);
-        return -EIO;
-}
-static const struct sysfs_ops sysfs_ops = {
-        .show   = sysdev_show,
-        .store  = sysdev_store,
-};
-static struct kobj_type ktype_sysdev = {
-        .sysfs_ops      = &sysfs_ops,
-};
-int sysdev_create_file(struct sys_device *s, struct sysdev_attribute *a)
-{
-        return sysfs_create_file(&s->kobj, &a->attr);
-}
-void sysdev_remove_file(struct sys_device *s, struct sysdev_attribute *a)
-{
-        sysfs_remove_file(&s->kobj, &a->attr);
-}
-EXPORT_SYMBOL_GPL(sysdev_create_file);
-EXPORT_SYMBOL_GPL(sysdev_remove_file);
-#define to_sysdev_class(k) container_of(k, struct sysdev_class, kset.kobj)
-#define to_sysdev_class_attr(a) container_of(a, \
-        struct sysdev_class_attribute, attr)
-static ssize_t sysdev_class_show(struct kobject *kobj, struct attribute *attr,
-                                 char *buffer)
-{
-        struct sysdev_class *class = to_sysdev_class(kobj);
-        struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr);
-        if (class_attr->show)
-                return class_attr->show(class, class_attr, buffer);
-        return -EIO;
-}
-static ssize_t sysdev_class_store(struct kobject *kobj, struct attribute *attr,
-                                  const char *buffer, size_t count)
-{
-        struct sysdev_class *class = to_sysdev_class(kobj);
-        struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr);
-        if (class_attr->store)
-                return class_attr->store(class, class_attr, buffer, count);
-        return -EIO;
-}
-static const struct sysfs_ops sysfs_class_ops = {
-        .show   = sysdev_class_show,
-        .store  = sysdev_class_store,
-};
-static struct kobj_type ktype_sysdev_class = {
-        .sysfs_ops      = &sysfs_class_ops,
-};
-int sysdev_class_create_file(struct sysdev_class *c,
-                             struct sysdev_class_attribute *a)
-{
-        return sysfs_create_file(&c->kset.kobj, &a->attr);
-}
-EXPORT_SYMBOL_GPL(sysdev_class_create_file);
-void sysdev_class_remove_file(struct sysdev_class *c,
-                              struct sysdev_class_attribute *a)
-{
-        sysfs_remove_file(&c->kset.kobj, &a->attr);
-}
-EXPORT_SYMBOL_GPL(sysdev_class_remove_file);
-extern struct kset *system_kset;
-int sysdev_class_register(struct sysdev_class *cls)
-{
-        int retval;
-        pr_debug("Registering sysdev class '%s'\n", cls->name);
-        INIT_LIST_HEAD(&cls->drivers);
-        memset(&cls->kset.kobj, 0x00, sizeof(struct kobject));
-        cls->kset.kobj.parent = &system_kset->kobj;
-        cls->kset.kobj.ktype = &ktype_sysdev_class;
-        cls->kset.kobj.kset = system_kset;
-        retval = kobject_set_name(&cls->kset.kobj, "%s", cls->name);
-        if (retval)
-                return retval;
-        retval = kset_register(&cls->kset);
-        if (!retval && cls->attrs)
-                retval = sysfs_create_files(&cls->kset.kobj,
-                                            (const struct attribute **)cls->attrs);
-        return retval;
-}
-void sysdev_class_unregister(struct sysdev_class *cls)
-{
-        pr_debug("Unregistering sysdev class '%s'\n",
-                 kobject_name(&cls->kset.kobj));
-        if (cls->attrs)
-                sysfs_remove_files(&cls->kset.kobj,
-                                   (const struct attribute **)cls->attrs);
-        kset_unregister(&cls->kset);
-}
-EXPORT_SYMBOL_GPL(sysdev_class_register);
-EXPORT_SYMBOL_GPL(sysdev_class_unregister);
-static DEFINE_MUTEX(sysdev_drivers_lock);
-/*
- * @dev != NULL means that we're unwinding because some drv->add()
- * failed for some reason. You need to grab sysdev_drivers_lock before
- * calling this.
- */
-static void __sysdev_driver_remove(struct sysdev_class *cls,
-                                   struct sysdev_driver *drv,
-                                   struct sys_device *from_dev)
-{
-        struct sys_device *dev = from_dev;
-        list_del_init(&drv->entry);
-        if (!cls)
-                return;
-        if (!drv->remove)
-                goto kset_put;
-        if (dev)
-                list_for_each_entry_continue_reverse(dev, &cls->kset.list,
-                                                     kobj.entry)
-                        drv->remove(dev);
-        else
-                list_for_each_entry(dev, &cls->kset.list, kobj.entry)
-                        drv->remove(dev);
-kset_put:
-        kset_put(&cls->kset);
-}
-/**
- *      sysdev_driver_register - Register auxiliary driver
- *      @cls:   Device class driver belongs to.
- *      @drv:   Driver.
- *
- *      @drv is inserted into @cls->drivers to be
- *      called on each operation on devices of that class. The refcount
- *      of @cls is incremented.
- */
-int sysdev_driver_register(struct sysdev_class *cls, struct sysdev_driver *drv)
-{
-        struct sys_device *dev = NULL;
-        int err = 0;
-        if (!cls) {
-                WARN(1, KERN_WARNING "sysdev: invalid class passed to %s!\n",
-                        __func__);
-                return -EINVAL;
-        }
-        /* Check whether this driver has already been added to a class. */
-        if (drv->entry.next && !list_empty(&drv->entry))
-                WARN(1, KERN_WARNING "sysdev: class %s: driver (%p) has already"
-                        " been registered to a class, something is wrong, but "
-                        "will forge on!\n", cls->name, drv);
-        mutex_lock(&sysdev_drivers_lock);
-        if (cls && kset_get(&cls->kset)) {
-                list_add_tail(&drv->entry, &cls->drivers);
-                /* If devices of this class already exist, tell the driver */
-                if (drv->add) {
-                        list_for_each_entry(dev, &cls->kset.list, kobj.entry) {
-                                err = drv->add(dev);
-                                if (err)
-                                        goto unwind;
-                        }
-                }
-        } else {
-                err = -EINVAL;
-                WARN(1, KERN_ERR "%s: invalid device class\n", __func__);
-        }
-        goto unlock;
-unwind:
-        __sysdev_driver_remove(cls, drv, dev);
-unlock:
-        mutex_unlock(&sysdev_drivers_lock);
-        return err;
-}
-/**
- *      sysdev_driver_unregister - Remove an auxiliary driver.
- *      @cls:   Class driver belongs to.
- *      @drv:   Driver.
- */
-void sysdev_driver_unregister(struct sysdev_class *cls,
-                              struct sysdev_driver *drv)
-{
-        mutex_lock(&sysdev_drivers_lock);
-        __sysdev_driver_remove(cls, drv, NULL);
-        mutex_unlock(&sysdev_drivers_lock);
-}
-EXPORT_SYMBOL_GPL(sysdev_driver_register);
-EXPORT_SYMBOL_GPL(sysdev_driver_unregister);
-/**
- *      sysdev_register - add a system device to the tree
- *      @sysdev:        device in question
- *
- */
-int sysdev_register(struct sys_device *sysdev)
-{
-        int error;
-        struct sysdev_class *cls = sysdev->cls;
-        if (!cls)
-                return -EINVAL;
-        pr_debug("Registering sys device of class '%s'\n",
-                 kobject_name(&cls->kset.kobj));
-        /* initialize the kobject to 0, in case it had previously been used */
-        memset(&sysdev->kobj, 0x00, sizeof(struct kobject));
-        /* Make sure the kset is set */
-        sysdev->kobj.kset = &cls->kset;
-        /* Register the object */
-        error = kobject_init_and_add(&sysdev->kobj, &ktype_sysdev, NULL,
-                                     "%s%d", kobject_name(&cls->kset.kobj),
-                                     sysdev->id);
-        if (!error) {
-                struct sysdev_driver *drv;
-                pr_debug("Registering sys device '%s'\n",
-                         kobject_name(&sysdev->kobj));
-                mutex_lock(&sysdev_drivers_lock);
-                /* Generic notification is implicit, because it's that
-                 * code that should have called us.
-                 */
-                /* Notify class auxiliary drivers */
-                list_for_each_entry(drv, &cls->drivers, entry) {
-                        if (drv->add)
-                                drv->add(sysdev);
-                }
-                mutex_unlock(&sysdev_drivers_lock);
-                kobject_uevent(&sysdev->kobj, KOBJ_ADD);
-        }
-        return error;
-}
-void sysdev_unregister(struct sys_device *sysdev)
-{
-        struct sysdev_driver *drv;
-        mutex_lock(&sysdev_drivers_lock);
-        list_for_each_entry(drv, &sysdev->cls->drivers, entry) {
-                if (drv->remove)
-                        drv->remove(sysdev);
-        }
-        mutex_unlock(&sysdev_drivers_lock);
-        kobject_put(&sysdev->kobj);
-}
-EXPORT_SYMBOL_GPL(sysdev_register);
-EXPORT_SYMBOL_GPL(sysdev_unregister);
-#define to_ext_attr(x) container_of(x, struct sysdev_ext_attribute, attr)
-ssize_t sysdev_store_ulong(struct sys_device *sysdev,
-                           struct sysdev_attribute *attr,
-                           const char *buf, size_t size)
-{
-        struct sysdev_ext_attribute *ea = to_ext_attr(attr);
-        char *end;
-        unsigned long new = simple_strtoul(buf, &end, 0);
-        if (end == buf)
-                return -EINVAL;
-        *(unsigned long *)(ea->var) = new;
-        /* Always return full write size even if we didn't consume all */
-        return size;
-}
-EXPORT_SYMBOL_GPL(sysdev_store_ulong);
-ssize_t sysdev_show_ulong(struct sys_device *sysdev,
-                          struct sysdev_attribute *attr,
-                          char *buf)
-{
-        struct sysdev_ext_attribute *ea = to_ext_attr(attr);
-        return snprintf(buf, PAGE_SIZE, "%lx\n", *(unsigned long *)(ea->var));
-}
-EXPORT_SYMBOL_GPL(sysdev_show_ulong);
-ssize_t sysdev_store_int(struct sys_device *sysdev,
-                           struct sysdev_attribute *attr,
-                           const char *buf, size_t size)
-{
-        struct sysdev_ext_attribute *ea = to_ext_attr(attr);
-        char *end;
-        long new = simple_strtol(buf, &end, 0);
-        if (end == buf || new > INT_MAX || new < INT_MIN)
-                return -EINVAL;
-        *(int *)(ea->var) = new;
-        /* Always return full write size even if we didn't consume all */
-        return size;
-}
-EXPORT_SYMBOL_GPL(sysdev_store_int);
-ssize_t sysdev_show_int(struct sys_device *sysdev,
-                          struct sysdev_attribute *attr,
-                          char *buf)
-{
-        struct sysdev_ext_attribute *ea = to_ext_attr(attr);
-        return snprintf(buf, PAGE_SIZE, "%d\n", *(int *)(ea->var));
-}
-EXPORT_SYMBOL_GPL(sysdev_show_int);
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 3fd31dec8c9c..a6278e7e61a0 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -380,6 +380,7 @@ static int rbd_get_client(struct rbd_device *rbd_dev, const char *mon_addr,
        rbdc = __rbd_client_find(opt);
        if (rbdc) {
                ceph_destroy_options(opt);
+                kfree(rbd_opts);
                /* using an existing client */
                kref_get(&rbdc->kref);
@@ -406,15 +407,15 @@ done_err:
 /*
 * Destroy ceph client
+ *
+ * Caller must hold node_lock.
 */
 static void rbd_client_release(struct kref *kref)
 {
        struct rbd_client *rbdc = container_of(kref, struct rbd_client, kref);
        dout("rbd_release_client %p\n", rbdc);
-        spin_lock(&node_lock);
        list_del(&rbdc->node);
-        spin_unlock(&node_lock);
        ceph_destroy_client(rbdc->client);
        kfree(rbdc->rbd_opts);
@@ -427,7 +428,9 @@ static void rbd_client_release(struct kref *kref)
 */
 static void rbd_put_client(struct rbd_device *rbd_dev)
 {
+        spin_lock(&node_lock);
        kref_put(&rbd_dev->rbd_client->kref, rbd_client_release);
+        spin_unlock(&node_lock);
        rbd_dev->rbd_client = NULL;
        rbd_dev->client = NULL;
 }
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index 4b71647782d0..317c28ce8328 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -194,10 +194,10 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 err_out:
        if (bridge->driver->needs_scratch_page) {
-                void *va = page_address(bridge->scratch_page_page);
+                struct page *page = bridge->scratch_page_page;
-                bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP);
+                bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_UNMAP);
-                bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE);
+                bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_FREE);
        }
        if (got_gatt)
                bridge->driver->free_gatt_table(bridge);
@@ -221,10 +221,10 @@ static void agp_backend_cleanup(struct agp_bridge_data *bridge)
        if (bridge->driver->agp_destroy_page &&
            bridge->driver->needs_scratch_page) {
-                void *va = page_address(bridge->scratch_page_page);
+                struct page *page = bridge->scratch_page_page;
-                bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP);
+                bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_UNMAP);
-                bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE);
+                bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_FREE);
        }
 }
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 6628feaa7622..7f5f0da726da 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -263,6 +263,7 @@ static inline struct fw_ohci *fw_ohci(struct fw_card *card)
 static char ohci_driver_name[] = KBUILD_MODNAME;
 #define PCI_DEVICE_ID_AGERE_FW643       0x5901
+#define PCI_DEVICE_ID_CREATIVE_SB1394   0x4001
 #define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380
 #define PCI_DEVICE_ID_TI_TSB12LV22      0x8009
 #define PCI_DEVICE_ID_TI_TSB12LV26      0x8020
@@ -289,6 +290,9 @@ static const struct {
        {PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_AGERE_FW643, 6,
                QUIRK_NO_MSI},
+        {PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_SB1394, PCI_ANY_ID,
+                QUIRK_RESET_PACKET},
        {PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, PCI_ANY_ID,
                QUIRK_NO_MSI},
@@ -299,7 +303,7 @@ static const struct {
                QUIRK_NO_MSI},
        {PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID,
-                QUIRK_CYCLE_TIMER},
+                QUIRK_CYCLE_TIMER | QUIRK_NO_MSI},
        {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, PCI_ANY_ID,
                QUIRK_CYCLE_TIMER | QUIRK_RESET_PACKET | QUIRK_NO_1394A},
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 396e60ce8114..f8625e290728 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -140,7 +140,7 @@ int drm_gem_object_init(struct drm_device *dev,
        obj->dev = dev;
        obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE);
        if (IS_ERR(obj->filp))
-                return -ENOMEM;
+                return PTR_ERR(obj->filp);
        kref_init(&obj->refcount);
        atomic_set(&obj->handle_count, 0);
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index f9aaa56eae07..b9e5266c341b 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -13,7 +13,7 @@ config DRM_EXYNOS
 config DRM_EXYNOS_FIMD
        tristate "Exynos DRM FIMD"
-        depends on DRM_EXYNOS
+        depends on DRM_EXYNOS && !FB_S3C
        default n
        help
          Choose this option if you want to use Exynos FIMD for DRM.
@@ -21,7 +21,7 @@ config DRM_EXYNOS_FIMD
 config DRM_EXYNOS_HDMI
        tristate "Exynos DRM HDMI"
-        depends on DRM_EXYNOS
+        depends on DRM_EXYNOS && !VIDEO_SAMSUNG_S5P_TV
        help
          Choose this option if you want to use Exynos HDMI for DRM.
          If M is selected, the module will be called exynos_drm_hdmi
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index ca83139cd309..b6a737d196ae 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -158,7 +158,8 @@ static void fimd_dpms(struct device *subdrv_dev, int mode)
        case DRM_MODE_DPMS_STANDBY:
        case DRM_MODE_DPMS_SUSPEND:
        case DRM_MODE_DPMS_OFF:
-                pm_runtime_put_sync(subdrv_dev);
+                if (!ctx->suspended)
+                        pm_runtime_put_sync(subdrv_dev);
                break;
        default:
                DRM_DEBUG_KMS("unspecified mode %d\n", mode);
@@ -734,6 +735,46 @@ static void fimd_clear_win(struct fimd_context *ctx, int win)
        writel(val, ctx->regs + SHADOWCON);
 }
+static int fimd_power_on(struct fimd_context *ctx, bool enable)
+{
+        struct exynos_drm_subdrv *subdrv = &ctx->subdrv;
+        struct device *dev = subdrv->manager.dev;
+        DRM_DEBUG_KMS("%s\n", __FILE__);
+        if (enable != false && enable != true)
+                return -EINVAL;
+        if (enable) {
+                int ret;
+                ret = clk_enable(ctx->bus_clk);
+                if (ret < 0)
+                        return ret;
+                ret = clk_enable(ctx->lcd_clk);
+                if  (ret < 0) {
+                        clk_disable(ctx->bus_clk);
+                        return ret;
+                }
+                ctx->suspended = false;
+                /* if vblank was enabled status, enable it again. */
+                if (test_and_clear_bit(0, &ctx->irq_flags))
+                        fimd_enable_vblank(dev);
+                fimd_apply(dev);
+        } else {
+                clk_disable(ctx->lcd_clk);
+                clk_disable(ctx->bus_clk);
+                ctx->suspended = true;
+        }
+        return 0;
+}
 static int __devinit fimd_probe(struct platform_device *pdev)
 {
        struct device *dev = &pdev->dev;
@@ -911,39 +952,30 @@ out:
 #ifdef CONFIG_PM_SLEEP
 static int fimd_suspend(struct device *dev)
 {
-        int ret;
+        struct fimd_context *ctx = get_fimd_context(dev);
        if (pm_runtime_suspended(dev))
                return 0;
-        ret = pm_runtime_suspend(dev);
+        /*
-        if (ret < 0)
+         * do not use pm_runtime_suspend(). if pm_runtime_suspend() is
-                return ret;
+         * called here, an error would be returned by that interface
+         * because the usage_count of pm runtime is more than 1.
-        return 0;
+         */
+        return fimd_power_on(ctx, false);
 }
 static int fimd_resume(struct device *dev)
 {
-        int ret;
+        struct fimd_context *ctx = get_fimd_context(dev);
-        ret = pm_runtime_resume(dev);
-        if (ret < 0) {
-                DRM_ERROR("failed to resume runtime pm.\n");
-                return ret;
-        }
-        pm_runtime_disable(dev);
-        ret = pm_runtime_set_active(dev);
-        if (ret < 0) {
-                DRM_ERROR("failed to active runtime pm.\n");
-                pm_runtime_enable(dev);
-                pm_runtime_suspend(dev);
-                return ret;
-        }
-        pm_runtime_enable(dev);
+        /*
+         * if entered to sleep when lcd panel was on, the usage_count
+         * of pm runtime would still be 1 so in this case, fimd driver
+         * should be on directly not drawing on pm runtime interface.
+         */
+        if (!pm_runtime_suspended(dev))
+                return fimd_power_on(ctx, true);
        return 0;
 }
@@ -956,39 +988,16 @@ static int fimd_runtime_suspend(struct device *dev)
        DRM_DEBUG_KMS("%s\n", __FILE__);
-        clk_disable(ctx->lcd_clk);
+        return fimd_power_on(ctx, false);
-        clk_disable(ctx->bus_clk);
-        ctx->suspended = true;
-        return 0;
 }
 static int fimd_runtime_resume(struct device *dev)
 {
        struct fimd_context *ctx = get_fimd_context(dev);
-        int ret;
        DRM_DEBUG_KMS("%s\n", __FILE__);
-        ret = clk_enable(ctx->bus_clk);
+        return fimd_power_on(ctx, true);
-        if (ret < 0)
-                return ret;
-        ret = clk_enable(ctx->lcd_clk);
-        if  (ret < 0) {
-                clk_disable(ctx->bus_clk);
-                return ret;
-        }
-        ctx->suspended = false;
-        /* if vblank was enabled status, enable it again. */
-        if (test_and_clear_bit(0, &ctx->irq_flags))
-                fimd_enable_vblank(dev);
-        fimd_apply(dev);
-        return 0;
 }
 #endif
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index f48f7ce92f5f..3429d3fd93f3 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -1116,8 +1116,8 @@ err_ddc:
 err_iomap:
        iounmap(hdata->regs);
 err_req_region:
-        release_resource(hdata->regs_res);
+        release_mem_region(hdata->regs_res->start,
-        kfree(hdata->regs_res);
+                        resource_size(hdata->regs_res));
 err_resource:
        hdmi_resources_cleanup(hdata);
 err_data:
@@ -1145,8 +1145,8 @@ static int __devexit hdmi_remove(struct platform_device *pdev)
        iounmap(hdata->regs);
-        release_resource(hdata->regs_res);
+        release_mem_region(hdata->regs_res->start,
-        kfree(hdata->regs_res);
+                        resource_size(hdata->regs_res));
        /* hdmiphy i2c driver */
        i2c_del_driver(&hdmiphy_driver);
diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c
index 791c0ef1a65b..830dfdd6bf15 100644
--- a/drivers/gpu/drm/gma500/framebuffer.c
+++ b/drivers/gpu/drm/gma500/framebuffer.c
@@ -113,12 +113,12 @@ static int psbfb_pan(struct fb_var_screeninfo *var, struct fb_info *info)
 void psbfb_suspend(struct drm_device *dev)
 {
-        struct drm_framebuffer *fb = 0;
+        struct drm_framebuffer *fb;
-        struct psb_framebuffer *psbfb = to_psb_fb(fb);
        console_lock();
        mutex_lock(&dev->mode_config.mutex);
        list_for_each_entry(fb, &dev->mode_config.fb_list, head) {
+                struct psb_framebuffer *psbfb = to_psb_fb(fb);
                struct fb_info *info = psbfb->fbdev;
                fb_set_suspend(info, 1);
                drm_fb_helper_blank(FB_BLANK_POWERDOWN, info);
@@ -129,12 +129,12 @@ void psbfb_suspend(struct drm_device *dev)
 void psbfb_resume(struct drm_device *dev)
 {
-        struct drm_framebuffer *fb = 0;
+        struct drm_framebuffer *fb;
-        struct psb_framebuffer *psbfb = to_psb_fb(fb);
        console_lock();
        mutex_lock(&dev->mode_config.mutex);
        list_for_each_entry(fb, &dev->mode_config.fb_list, head) {
+                struct psb_framebuffer *psbfb = to_psb_fb(fb);
                struct fb_info *info = psbfb->fbdev;
                fb_set_suspend(info, 0);
                drm_fb_helper_blank(FB_BLANK_UNBLANK, info);
diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c
index f7c17b239833..7f4b4e10246e 100644
--- a/drivers/gpu/drm/i810/i810_dma.c
+++ b/drivers/gpu/drm/i810/i810_dma.c
@@ -886,7 +886,7 @@ static int i810_flush_queue(struct drm_device *dev)
 }
 /* Must be called with the lock held */
-void i810_driver_reclaim_buffers(struct drm_device *dev,
+static void i810_reclaim_buffers(struct drm_device *dev,
                                 struct drm_file *file_priv)
 {
        struct drm_device_dma *dma = dev->dma;
@@ -1223,17 +1223,12 @@ void i810_driver_preclose(struct drm_device *dev, struct drm_file *file_priv)
                if (dev_priv->page_flipping)
                        i810_do_cleanup_pageflip(dev);
        }
+}
-        if (file_priv->master && file_priv->master->lock.hw_lock) {
+void i810_driver_reclaim_buffers_locked(struct drm_device *dev,
-                drm_idlelock_take(&file_priv->master->lock);
+                                        struct drm_file *file_priv)
-                i810_driver_reclaim_buffers(dev, file_priv);
+{
-                drm_idlelock_release(&file_priv->master->lock);
+        i810_reclaim_buffers(dev, file_priv);
-        } else {
-                /* master disappeared, clean up stuff anyway and hope nothing
-                 * goes wrong */
-                i810_driver_reclaim_buffers(dev, file_priv);
-        }
 }
 int i810_driver_dma_quiescent(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i810/i810_drv.c b/drivers/gpu/drm/i810/i810_drv.c
index 053f1ee58393..ec12f7dc717a 100644
--- a/drivers/gpu/drm/i810/i810_drv.c
+++ b/drivers/gpu/drm/i810/i810_drv.c
@@ -63,6 +63,7 @@ static struct drm_driver driver = {
        .lastclose = i810_driver_lastclose,
        .preclose = i810_driver_preclose,
        .device_is_agp = i810_driver_device_is_agp,
+        .reclaim_buffers_locked = i810_driver_reclaim_buffers_locked,
        .dma_quiescent = i810_driver_dma_quiescent,
        .ioctls = i810_ioctls,
        .fops = &i810_driver_fops,
diff --git a/drivers/gpu/drm/i810/i810_drv.h b/drivers/gpu/drm/i810/i810_drv.h
index 6e0acad9e0f5..c9339f481795 100644
--- a/drivers/gpu/drm/i810/i810_drv.h
+++ b/drivers/gpu/drm/i810/i810_drv.h
@@ -116,12 +116,14 @@ typedef struct drm_i810_private {
                                /* i810_dma.c */
 extern int i810_driver_dma_quiescent(struct drm_device *dev);
-void i810_driver_reclaim_buffers(struct drm_device *dev,
+extern void i810_driver_reclaim_buffers_locked(struct drm_device *dev,
-                                 struct drm_file *file_priv);
+                                               struct drm_file *file_priv);
 extern int i810_driver_load(struct drm_device *, unsigned long flags);
 extern void i810_driver_lastclose(struct drm_device *dev);
 extern void i810_driver_preclose(struct drm_device *dev,
                                 struct drm_file *file_priv);
+extern void i810_driver_reclaim_buffers_locked(struct drm_device *dev,
+                                               struct drm_file *file_priv);
 extern int i810_driver_device_is_agp(struct drm_device *dev);
 extern long i810_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 11807989f918..deaa657292b4 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -121,11 +121,11 @@ static const char *cache_level_str(int type)
 static void
 describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
 {
-        seq_printf(m, "%p: %s%s %8zd %04x %04x %d %d%s%s%s",
+        seq_printf(m, "%p: %s%s %8zdKiB %04x %04x %d %d%s%s%s",
                   &obj->base,
                   get_pin_flag(obj),
                   get_tiling_flag(obj),
-                   obj->base.size,
+                   obj->base.size / 1024,
                   obj->base.read_domains,
                   obj->base.write_domain,
                   obj->last_rendering_seqno,
@@ -653,7 +653,7 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data)
        seq_printf(m, "  Size :    %08x\n", ring->size);
        seq_printf(m, "  Active :  %08x\n", intel_ring_get_active_head(ring));
        seq_printf(m, "  NOPID :   %08x\n", I915_READ_NOPID(ring));
-        if (IS_GEN6(dev)) {
+        if (IS_GEN6(dev) || IS_GEN7(dev)) {
                seq_printf(m, "  Sync 0 :   %08x\n", I915_READ_SYNC_0(ring));
                seq_printf(m, "  Sync 1 :   %08x\n", I915_READ_SYNC_1(ring));
        }
@@ -1075,6 +1075,7 @@ static int gen6_drpc_info(struct seq_file *m)
        struct drm_device *dev = node->minor->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        u32 rpmodectl1, gt_core_status, rcctl1;
+        unsigned forcewake_count;
        int count=0, ret;
@@ -1082,9 +1083,13 @@ static int gen6_drpc_info(struct seq_file *m)
        if (ret)
                return ret;
-        if (atomic_read(&dev_priv->forcewake_count)) {
+        spin_lock_irq(&dev_priv->gt_lock);
-                seq_printf(m, "RC information inaccurate because userspace "
+        forcewake_count = dev_priv->forcewake_count;
-                              "holds a reference \n");
+        spin_unlock_irq(&dev_priv->gt_lock);
+        if (forcewake_count) {
+                seq_printf(m, "RC information inaccurate because somebody "
+                              "holds a forcewake reference \n");
        } else {
                /* NB: we cannot use forcewake, else we read the wrong values */
                while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1))
@@ -1106,7 +1111,7 @@ static int gen6_drpc_info(struct seq_file *m)
        seq_printf(m, "SW control enabled: %s\n",
                   yesno((rpmodectl1 & GEN6_RP_MEDIA_MODE_MASK) ==
                          GEN6_RP_MEDIA_SW_MODE));
-        seq_printf(m, "RC6 Enabled: %s\n",
+        seq_printf(m, "RC1e Enabled: %s\n",
                   yesno(rcctl1 & GEN6_RC_CTL_RC1e_ENABLE));
        seq_printf(m, "RC6 Enabled: %s\n",
                   yesno(rcctl1 & GEN6_RC_CTL_RC6_ENABLE));
@@ -1398,9 +1403,13 @@ static int i915_gen6_forcewake_count_info(struct seq_file *m, void *data)
        struct drm_info_node *node = (struct drm_info_node *) m->private;
        struct drm_device *dev = node->minor->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
+        unsigned forcewake_count;
+        spin_lock_irq(&dev_priv->gt_lock);
+        forcewake_count = dev_priv->forcewake_count;
+        spin_unlock_irq(&dev_priv->gt_lock);
-        seq_printf(m, "forcewake count = %d\n",
+        seq_printf(m, "forcewake count = %u\n", forcewake_count);
-                   atomic_read(&dev_priv->forcewake_count));
        return 0;
 }
@@ -1665,7 +1674,7 @@ static int i915_forcewake_open(struct inode *inode, struct file *file)
        struct drm_i915_private *dev_priv = dev->dev_private;
        int ret;
-        if (!IS_GEN6(dev))
+        if (INTEL_INFO(dev)->gen < 6)
                return 0;
        ret = mutex_lock_interruptible(&dev->struct_mutex);
@@ -1682,7 +1691,7 @@ int i915_forcewake_release(struct inode *inode, struct file *file)
        struct drm_device *dev = inode->i_private;
        struct drm_i915_private *dev_priv = dev->dev_private;
-        if (!IS_GEN6(dev))
+        if (INTEL_INFO(dev)->gen < 6)
                return 0;
        /*
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 5f4d5893e983..ddfe3d902b2a 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -2045,6 +2045,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
        if (!IS_I945G(dev) && !IS_I945GM(dev))
                pci_enable_msi(dev->pdev);
+        spin_lock_init(&dev_priv->gt_lock);
        spin_lock_init(&dev_priv->irq_lock);
        spin_lock_init(&dev_priv->error_lock);
        spin_lock_init(&dev_priv->rps_lock);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 8f7187915b0d..308f81913562 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -368,11 +368,12 @@ void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
 */
 void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
 {
-        WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex));
+        unsigned long irqflags;
-        /* Forcewake is atomic in case we get in here without the lock */
+        spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
-        if (atomic_add_return(1, &dev_priv->forcewake_count) == 1)
+        if (dev_priv->forcewake_count++ == 0)
                dev_priv->display.force_wake_get(dev_priv);
+        spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
 }
 void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
@@ -392,10 +393,12 @@ void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv)
 */
 void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
 {
-        WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex));
+        unsigned long irqflags;
-        if (atomic_dec_and_test(&dev_priv->forcewake_count))
+        spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
+        if (--dev_priv->forcewake_count == 0)
                dev_priv->display.force_wake_put(dev_priv);
+        spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
 }
 void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
@@ -597,9 +600,36 @@ static int ironlake_do_reset(struct drm_device *dev, u8 flags)
 static int gen6_do_reset(struct drm_device *dev, u8 flags)
 {
        struct drm_i915_private *dev_priv = dev->dev_private;
+        int     ret;
+        unsigned long irqflags;
-        I915_WRITE(GEN6_GDRST, GEN6_GRDOM_FULL);
+        /* Hold gt_lock across reset to prevent any register access
-        return wait_for((I915_READ(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500);
+         * with forcewake not set correctly
+         */
+        spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
+        /* Reset the chip */
+        /* GEN6_GDRST is not in the gt power well, no need to check
+         * for fifo space for the write or forcewake the chip for
+         * the read
+         */
+        I915_WRITE_NOTRACE(GEN6_GDRST, GEN6_GRDOM_FULL);
+        /* Spin waiting for the device to ack the reset request */
+        ret = wait_for((I915_READ_NOTRACE(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500);
+        /* If reset with a user forcewake, try to restore, otherwise turn it off */
+        if (dev_priv->forcewake_count)
+                dev_priv->display.force_wake_get(dev_priv);
+        else
+                dev_priv->display.force_wake_put(dev_priv);
+        /* Restore fifo count */
+        dev_priv->gt_fifo_count = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
+        spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
+        return ret;
 }
 /**
@@ -643,9 +673,6 @@ int i915_reset(struct drm_device *dev, u8 flags)
        case 7:
        case 6:
                ret = gen6_do_reset(dev, flags);
-                /* If reset with a user forcewake, try to restore */
-                if (atomic_read(&dev_priv->forcewake_count))
-                        __gen6_gt_force_wake_get(dev_priv);
                break;
        case 5:
                ret = ironlake_do_reset(dev, flags);
@@ -927,9 +954,14 @@ MODULE_LICENSE("GPL and additional rights");
 u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \
        u##x val = 0; \
        if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
-                gen6_gt_force_wake_get(dev_priv); \
+                unsigned long irqflags; \
+                spin_lock_irqsave(&dev_priv->gt_lock, irqflags); \
+                if (dev_priv->forcewake_count == 0) \
+                        dev_priv->display.force_wake_get(dev_priv); \
                val = read##y(dev_priv->regs + reg); \
-                gen6_gt_force_wake_put(dev_priv); \
+                if (dev_priv->forcewake_count == 0) \
+                        dev_priv->display.force_wake_put(dev_priv); \
+                spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); \
        } else { \
                val = read##y(dev_priv->regs + reg); \
        } \
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 602bc80baabb..9689ca38b2b3 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -288,7 +288,13 @@ typedef struct drm_i915_private {
        int relative_constants_mode;
        void __iomem *regs;
-        u32 gt_fifo_count;
+        /** gt_fifo_count and the subsequent register write are synchronized
+         * with dev->struct_mutex. */
+        unsigned gt_fifo_count;
+        /** forcewake_count is protected by gt_lock */
+        unsigned forcewake_count;
+        /** gt_lock is also taken in irq contexts. */
+        struct spinlock gt_lock;
        struct intel_gmbus {
                struct i2c_adapter adapter;
@@ -741,8 +747,6 @@ typedef struct drm_i915_private {
        struct drm_property *broadcast_rgb_property;
        struct drm_property *force_audio_property;
-        atomic_t forcewake_count;
 } drm_i915_private_t;
 enum i915_cache_level {
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 5d433fc11ace..5bd4361ea84d 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1751,7 +1751,8 @@ static void ironlake_irq_preinstall(struct drm_device *dev)
                INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work);
        I915_WRITE(HWSTAM, 0xeffe);
-        if (IS_GEN6(dev) || IS_GEN7(dev)) {
+        if (IS_GEN6(dev)) {
                /* Workaround stalls observed on Sandy Bridge GPUs by
                 * making the blitter command streamer generate a
                 * write to the Hardware Status Page for
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 7886e4fb60e3..2b5eb229ff2c 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -28,14 +28,19 @@
 #include "drm.h"
 #include "i915_drm.h"
 #include "intel_drv.h"
+#include "i915_reg.h"
 static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe)
 {
        struct drm_i915_private *dev_priv = dev->dev_private;
        u32     dpll_reg;
+        /* On IVB, 3rd pipe shares PLL with another one */
+        if (pipe > 1)
+                return false;
        if (HAS_PCH_SPLIT(dev))
-                dpll_reg = (pipe == PIPE_A) ? _PCH_DPLL_A : _PCH_DPLL_B;
+                dpll_reg = PCH_DPLL(pipe);
        else
                dpll_reg = (pipe == PIPE_A) ? _DPLL_A : _DPLL_B;
@@ -822,7 +827,7 @@ int i915_save_state(struct drm_device *dev)
        if (IS_IRONLAKE_M(dev))
                ironlake_disable_drps(dev);
-        if (IS_GEN6(dev))
+        if (INTEL_INFO(dev)->gen >= 6)
                gen6_disable_rps(dev);
        /* Cache mode state */
@@ -881,7 +886,7 @@ int i915_restore_state(struct drm_device *dev)
                intel_init_emon(dev);
        }
-        if (IS_GEN6(dev)) {
+        if (INTEL_INFO(dev)->gen >= 6) {
                gen6_enable_rps(dev_priv);
                gen6_update_ring_freq(dev_priv);
        }
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index 8af3735e27c6..dbda6e3bdf07 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -467,8 +467,12 @@ struct edp_link_params {
 struct bdb_edp {
        struct edp_power_seq power_seqs[16];
        u32 color_depth;
-        u32 sdrrs_msa_timing_delay;
        struct edp_link_params link_params[16];
+        u32 sdrrs_msa_timing_delay;
+        /* ith bit indicates enabled/disabled for (i+1)th panel */
+        u16 edp_s3d_feature;
+        u16 edp_t3_optimization;
 } __attribute__ ((packed));
 void intel_setup_bios(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index fee0ad02c6d0..dd729d46a61f 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -24,6 +24,7 @@
 *      Eric Anholt <eric@anholt.net>
 */
+#include <linux/dmi.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include "drmP.h"
@@ -540,6 +541,24 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = {
        .destroy = intel_encoder_destroy,
 };
+static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id)
+{
+        DRM_DEBUG_KMS("Skipping CRT initialization for %s\n", id->ident);
+        return 1;
+}
+static const struct dmi_system_id intel_no_crt[] = {
+        {
+                .callback = intel_no_crt_dmi_callback,
+                .ident = "ACER ZGB",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
+                },
+        },
+        { }
+};
 void intel_crt_init(struct drm_device *dev)
 {
        struct drm_connector *connector;
@@ -547,6 +566,10 @@ void intel_crt_init(struct drm_device *dev)
        struct intel_connector *intel_connector;
        struct drm_i915_private *dev_priv = dev->dev_private;
+        /* Skip machines without VGA that falsely report hotplug events */
+        if (dmi_check_system(intel_no_crt))
+                return;
        crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
        if (!crt)
                return;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 2a3f707caab8..b3b51c43dad0 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5808,12 +5808,15 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
        if (is_lvds) {
                temp = I915_READ(PCH_LVDS);
                temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
-                if (HAS_PCH_CPT(dev))
+                if (HAS_PCH_CPT(dev)) {
+                        temp &= ~PORT_TRANS_SEL_MASK;
                        temp |= PORT_TRANS_SEL_CPT(pipe);
-                else if (pipe == 1)
+                } else {
-                        temp |= LVDS_PIPEB_SELECT;
+                        if (pipe == 1)
-                else
+                                temp |= LVDS_PIPEB_SELECT;
-                        temp &= ~LVDS_PIPEB_SELECT;
+                        else
+                                temp &= ~LVDS_PIPEB_SELECT;
+                }
                /* set the corresponsding LVDS_BORDER bit */
                temp |= dev_priv->lvds_border_bits;
@@ -9025,12 +9028,9 @@ void intel_modeset_init(struct drm_device *dev)
        for (i = 0; i < dev_priv->num_pipe; i++) {
                intel_crtc_init(dev, i);
-                if (HAS_PCH_SPLIT(dev)) {
+                ret = intel_plane_init(dev, i);
-                        ret = intel_plane_init(dev, i);
+                if (ret)
-                        if (ret)
+                        DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret);
-                                DRM_ERROR("plane %d init failed: %d\n",
-                                          i, ret);
-                }
        }
        /* Just disable it once at startup */
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index e44191132ac4..798f6e1aa544 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -708,6 +708,14 @@ static const struct dmi_system_id intel_no_lvds[] = {
                },
        },
        {
+                .callback = intel_no_lvds_dmi_callback,
+                .ident = "Clientron E830",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "E830"),
+                },
+        },
+        {
                .callback = intel_no_lvds_dmi_callback,
                .ident = "Asus EeeBox PC EB1007",
                .matches = {
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 77e729d4e4f0..1ab842c6032e 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -636,6 +636,19 @@ render_ring_add_request(struct intel_ring_buffer *ring,
 }
 static u32
+gen6_ring_get_seqno(struct intel_ring_buffer *ring)
+{
+        struct drm_device *dev = ring->dev;
+        /* Workaround to force correct ordering between irq and seqno writes on
+         * ivb (and maybe also on snb) by reading from a CS register (like
+         * ACTHD) before reading the status page. */
+        if (IS_GEN7(dev))
+                intel_ring_get_active_head(ring);
+        return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
+}
+static u32
 ring_get_seqno(struct intel_ring_buffer *ring)
 {
        return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
@@ -792,17 +805,6 @@ ring_add_request(struct intel_ring_buffer *ring,
 }
 static bool
-gen7_blt_ring_get_irq(struct intel_ring_buffer *ring)
-{
-        /* The BLT ring on IVB appears to have broken synchronization
-         * between the seqno write and the interrupt, so that the
-         * interrupt appears first.  Returning false here makes
-         * i915_wait_request() do a polling loop, instead.
-         */
-        return false;
-}
-static bool
 gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
 {
        struct drm_device *dev = ring->dev;
@@ -811,6 +813,12 @@ gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
        if (!dev->irq_enabled)
               return false;
+        /* It looks like we need to prevent the gt from suspending while waiting
+         * for an notifiy irq, otherwise irqs seem to get lost on at least the
+         * blt/bsd rings on ivb. */
+        if (IS_GEN7(dev))
+                gen6_gt_force_wake_get(dev_priv);
        spin_lock(&ring->irq_lock);
        if (ring->irq_refcount++ == 0) {
                ring->irq_mask &= ~rflag;
@@ -835,6 +843,9 @@ gen6_ring_put_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
                ironlake_disable_irq(dev_priv, gflag);
        }
        spin_unlock(&ring->irq_lock);
+        if (IS_GEN7(dev))
+                gen6_gt_force_wake_put(dev_priv);
 }
 static bool
@@ -1341,7 +1352,7 @@ static const struct intel_ring_buffer gen6_bsd_ring = {
        .write_tail             = gen6_bsd_ring_write_tail,
        .flush                  = gen6_ring_flush,
        .add_request            = gen6_add_request,
-        .get_seqno              = ring_get_seqno,
+        .get_seqno              = gen6_ring_get_seqno,
        .irq_get                = gen6_bsd_ring_get_irq,
        .irq_put                = gen6_bsd_ring_put_irq,
        .dispatch_execbuffer    = gen6_ring_dispatch_execbuffer,
@@ -1476,7 +1487,7 @@ static const struct intel_ring_buffer gen6_blt_ring = {
        .write_tail             = ring_write_tail,
        .flush                  = blt_ring_flush,
        .add_request            = gen6_add_request,
-        .get_seqno              = ring_get_seqno,
+        .get_seqno              = gen6_ring_get_seqno,
        .irq_get                = blt_ring_get_irq,
        .irq_put                = blt_ring_put_irq,
        .dispatch_execbuffer    = gen6_ring_dispatch_execbuffer,
@@ -1499,6 +1510,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
                ring->flush = gen6_render_ring_flush;
                ring->irq_get = gen6_render_ring_get_irq;
                ring->irq_put = gen6_render_ring_put_irq;
+                ring->get_seqno = gen6_ring_get_seqno;
        } else if (IS_GEN5(dev)) {
                ring->add_request = pc_render_add_request;
                ring->get_seqno = pc_render_get_seqno;
@@ -1577,8 +1589,5 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)
        *ring = gen6_blt_ring;
-        if (IS_GEN7(dev))
-                ring->irq_get = gen7_blt_ring_get_irq;
        return intel_init_ring_buffer(dev, ring);
 }
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index f7b9268df266..e334ec33a47d 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1066,15 +1066,13 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
        /* Set the SDVO control regs. */
        if (INTEL_INFO(dev)->gen >= 4) {
-                sdvox = 0;
+                /* The real mode polarity is set by the SDVO commands, using
+                 * struct intel_sdvo_dtd. */
+                sdvox = SDVO_VSYNC_ACTIVE_HIGH | SDVO_HSYNC_ACTIVE_HIGH;
                if (intel_sdvo->is_hdmi)
                        sdvox |= intel_sdvo->color_range;
                if (INTEL_INFO(dev)->gen < 5)
                        sdvox |= SDVO_BORDER_ENABLE;
-                if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
-                        sdvox |= SDVO_VSYNC_ACTIVE_HIGH;
-                if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
-                        sdvox |= SDVO_HSYNC_ACTIVE_HIGH;
        } else {
                sdvox = I915_READ(intel_sdvo->sdvo_reg);
                switch (intel_sdvo->sdvo_reg) {
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index d13989fda501..2288abf88cce 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -466,10 +466,8 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
        mutex_lock(&dev->struct_mutex);
        ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
-        if (ret) {
+        if (ret)
-                DRM_ERROR("failed to pin object\n");
                goto out_unlock;
-        }
        intel_plane->obj = obj;
@@ -632,10 +630,8 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe)
        unsigned long possible_crtcs;
        int ret;
-        if (!(IS_GEN6(dev) || IS_GEN7(dev))) {
+        if (!(IS_GEN6(dev) || IS_GEN7(dev)))
-                DRM_ERROR("new plane code only for SNB+\n");
                return -ENODEV;
-        }
        intel_plane = kzalloc(sizeof(struct intel_plane), GFP_KERNEL);
        if (!intel_plane)
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index f3c6a9a8b081..1571be37ce3e 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -417,7 +417,7 @@ static const struct tv_mode tv_modes[] = {
        {
                .name           = "NTSC-M",
                .clock          = 108000,
-                .refresh        = 29970,
+                .refresh        = 59940,
                .oversample     = TV_OVERSAMPLE_8X,
                .component_only = 0,
                /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */
@@ -460,7 +460,7 @@ static const struct tv_mode tv_modes[] = {
        {
                .name           = "NTSC-443",
                .clock          = 108000,
-                .refresh        = 29970,
+                .refresh        = 59940,
                .oversample     = TV_OVERSAMPLE_8X,
                .component_only = 0,
                /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 4.43MHz */
@@ -502,7 +502,7 @@ static const struct tv_mode tv_modes[] = {
        {
                .name           = "NTSC-J",
                .clock          = 108000,
-                .refresh        = 29970,
+                .refresh        = 59940,
                .oversample     = TV_OVERSAMPLE_8X,
                .component_only = 0,
@@ -545,7 +545,7 @@ static const struct tv_mode tv_modes[] = {
        {
                .name           = "PAL-M",
                .clock          = 108000,
-                .refresh        = 29970,
+                .refresh        = 59940,
                .oversample     = TV_OVERSAMPLE_8X,
                .component_only = 0,
@@ -589,7 +589,7 @@ static const struct tv_mode tv_modes[] = {
                /* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */
                .name       = "PAL-N",
                .clock          = 108000,
-                .refresh        = 25000,
+                .refresh        = 50000,
                .oversample     = TV_OVERSAMPLE_8X,
                .component_only = 0,
@@ -634,7 +634,7 @@ static const struct tv_mode tv_modes[] = {
                /* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */
                .name       = "PAL",
                .clock          = 108000,
-                .refresh        = 25000,
+                .refresh        = 50000,
                .oversample     = TV_OVERSAMPLE_8X,
                .component_only = 0,
@@ -674,78 +674,6 @@ static const struct tv_mode tv_modes[] = {
                .filter_table = filter_table,
        },
        {
-                .name       = "480p@59.94Hz",
-                .clock          = 107520,
-                .refresh        = 59940,
-                .oversample     = TV_OVERSAMPLE_4X,
-                .component_only = 1,
-                .hsync_end      = 64,               .hblank_end         = 122,
-                .hblank_start   = 842,              .htotal             = 857,
-                .progressive    = true,             .trilevel_sync = false,
-                .vsync_start_f1 = 12,               .vsync_start_f2     = 12,
-                .vsync_len      = 12,
-                .veq_ena        = false,
-                .vi_end_f1      = 44,               .vi_end_f2          = 44,
-                .nbr_end        = 479,
-                .burst_ena      = false,
-                .filter_table = filter_table,
-        },
-        {
-                .name       = "480p@60Hz",
-                .clock          = 107520,
-                .refresh        = 60000,
-                .oversample     = TV_OVERSAMPLE_4X,
-                .component_only = 1,
-                .hsync_end      = 64,               .hblank_end         = 122,
-                .hblank_start   = 842,              .htotal             = 856,
-                .progressive    = true,             .trilevel_sync = false,
-                .vsync_start_f1 = 12,               .vsync_start_f2     = 12,
-                .vsync_len      = 12,
-                .veq_ena        = false,
-                .vi_end_f1      = 44,               .vi_end_f2          = 44,
-                .nbr_end        = 479,
-                .burst_ena      = false,
-                .filter_table = filter_table,
-        },
-        {
-                .name       = "576p",
-                .clock          = 107520,
-                .refresh        = 50000,
-                .oversample     = TV_OVERSAMPLE_4X,
-                .component_only = 1,
-                .hsync_end      = 64,               .hblank_end         = 139,
-                .hblank_start   = 859,              .htotal             = 863,
-                .progressive    = true,         .trilevel_sync = false,
-                .vsync_start_f1 = 10,               .vsync_start_f2     = 10,
-                .vsync_len      = 10,
-                .veq_ena        = false,
-                .vi_end_f1      = 48,               .vi_end_f2          = 48,
-                .nbr_end        = 575,
-                .burst_ena      = false,
-                .filter_table = filter_table,
-        },
-        {
                .name       = "720p@60Hz",
                .clock          = 148800,
                .refresh        = 60000,
@@ -770,30 +698,6 @@ static const struct tv_mode tv_modes[] = {
                .filter_table = filter_table,
        },
        {
-                .name       = "720p@59.94Hz",
-                .clock          = 148800,
-                .refresh        = 59940,
-                .oversample     = TV_OVERSAMPLE_2X,
-                .component_only = 1,
-                .hsync_end      = 80,               .hblank_end         = 300,
-                .hblank_start   = 1580,             .htotal             = 1651,
-                .progressive    = true,             .trilevel_sync = true,
-                .vsync_start_f1 = 10,               .vsync_start_f2     = 10,
-                .vsync_len      = 10,
-                .veq_ena        = false,
-                .vi_end_f1      = 29,               .vi_end_f2          = 29,
-                .nbr_end        = 719,
-                .burst_ena      = false,
-                .filter_table = filter_table,
-        },
-        {
                .name       = "720p@50Hz",
                .clock          = 148800,
                .refresh        = 50000,
@@ -821,7 +725,7 @@ static const struct tv_mode tv_modes[] = {
        {
                .name       = "1080i@50Hz",
                .clock          = 148800,
-                .refresh        = 25000,
+                .refresh        = 50000,
                .oversample     = TV_OVERSAMPLE_2X,
                .component_only = 1,
@@ -847,7 +751,7 @@ static const struct tv_mode tv_modes[] = {
        {
                .name       = "1080i@60Hz",
                .clock          = 148800,
-                .refresh        = 30000,
+                .refresh        = 60000,
                .oversample     = TV_OVERSAMPLE_2X,
                .component_only = 1,
@@ -870,32 +774,6 @@ static const struct tv_mode tv_modes[] = {
                .filter_table = filter_table,
        },
-        {
-                .name       = "1080i@59.94Hz",
-                .clock          = 148800,
-                .refresh        = 29970,
-                .oversample     = TV_OVERSAMPLE_2X,
-                .component_only = 1,
-                .hsync_end      = 88,               .hblank_end         = 235,
-                .hblank_start   = 2155,             .htotal             = 2201,
-                .progressive    = false,            .trilevel_sync = true,
-                .vsync_start_f1 = 4,            .vsync_start_f2    = 5,
-                .vsync_len      = 10,
-                .veq_ena        = true,             .veq_start_f1       = 4,
-                .veq_start_f2   = 4,            .veq_len          = 10,
-                .vi_end_f1      = 21,           .vi_end_f2        = 22,
-                .nbr_end        = 539,
-                .burst_ena      = false,
-                .filter_table = filter_table,
-        },
 };
 static struct intel_tv *enc_to_intel_tv(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.h b/drivers/gpu/drm/nouveau/nouveau_bios.h
index 1e382ad5a2b8..a37c31e358aa 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.h
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.h
@@ -54,9 +54,10 @@ struct bit_entry {
 int bit_table(struct drm_device *, u8 id, struct bit_entry *);
 enum dcb_gpio_tag {
-        DCB_GPIO_TVDAC0 = 0xc,
+        DCB_GPIO_PANEL_POWER = 0x01,
+        DCB_GPIO_TVDAC0 = 0x0c,
        DCB_GPIO_TVDAC1 = 0x2d,
-        DCB_GPIO_PWM_FAN = 0x9,
+        DCB_GPIO_PWM_FAN = 0x09,
        DCB_GPIO_FAN_SENSE = 0x3d,
        DCB_GPIO_UNUSED = 0xff
 };
diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
index 3cb52bc52b21..795a9e3c990a 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -219,6 +219,16 @@ nouveau_display_init(struct drm_device *dev)
        if (ret)
                return ret;
+        /* power on internal panel if it's not already.  the init tables of
+         * some vbios default this to off for some reason, causing the
+         * panel to not work after resume
+         */
+        if (nouveau_gpio_func_get(dev, DCB_GPIO_PANEL_POWER) == 0) {
+                nouveau_gpio_func_set(dev, DCB_GPIO_PANEL_POWER, true);
+                msleep(300);
+        }
+        /* enable polling for external displays */
        drm_kms_helper_poll_enable(dev);
        /* enable hotplug interrupts */
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c
index e4a7cfe7898d..81d7962e7252 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.c
@@ -124,7 +124,7 @@ MODULE_PARM_DESC(ctxfw, "Use external HUB/GPC ucode (fermi)\n");
 int nouveau_ctxfw;
 module_param_named(ctxfw, nouveau_ctxfw, int, 0400);
-MODULE_PARM_DESC(ctxfw, "Santise DCB table according to MXM-SIS\n");
+MODULE_PARM_DESC(mxmdcb, "Santise DCB table according to MXM-SIS\n");
 int nouveau_mxmdcb = 1;
 module_param_named(mxmdcb, nouveau_mxmdcb, int, 0400);
diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index 5f0bc57fdaab..7ce3fde40743 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -380,6 +380,25 @@ retry:
 }
 static int
+validate_sync(struct nouveau_channel *chan, struct nouveau_bo *nvbo)
+{
+        struct nouveau_fence *fence = NULL;
+        int ret = 0;
+        spin_lock(&nvbo->bo.bdev->fence_lock);
+        if (nvbo->bo.sync_obj)
+                fence = nouveau_fence_ref(nvbo->bo.sync_obj);
+        spin_unlock(&nvbo->bo.bdev->fence_lock);
+        if (fence) {
+                ret = nouveau_fence_sync(fence, chan);
+                nouveau_fence_unref(&fence);
+        }
+        return ret;
+}
+static int
 validate_list(struct nouveau_channel *chan, struct list_head *list,
              struct drm_nouveau_gem_pushbuf_bo *pbbo, uint64_t user_pbbo_ptr)
 {
@@ -393,7 +412,7 @@ validate_list(struct nouveau_channel *chan, struct list_head *list,
        list_for_each_entry(nvbo, list, entry) {
                struct drm_nouveau_gem_pushbuf_bo *b = &pbbo[nvbo->pbbo_index];
-                ret = nouveau_fence_sync(nvbo->bo.sync_obj, chan);
+                ret = validate_sync(chan, nvbo);
                if (unlikely(ret)) {
                        NV_ERROR(dev, "fail pre-validate sync\n");
                        return ret;
@@ -416,7 +435,7 @@ validate_list(struct nouveau_channel *chan, struct list_head *list,
                        return ret;
                }
-                ret = nouveau_fence_sync(nvbo->bo.sync_obj, chan);
+                ret = validate_sync(chan, nvbo);
                if (unlikely(ret)) {
                        NV_ERROR(dev, "fail post-validate sync\n");
                        return ret;
diff --git a/drivers/gpu/drm/nouveau/nouveau_mxm.c b/drivers/gpu/drm/nouveau/nouveau_mxm.c
index 8bccddf4eff0..e5a64f0f4cb7 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mxm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mxm.c
@@ -656,7 +656,16 @@ nouveau_mxm_init(struct drm_device *dev)
        if (mxm_shadow(dev, mxm[0])) {
                MXM_MSG(dev, "failed to locate valid SIS\n");
+#if 0
+                /* we should, perhaps, fall back to some kind of limited
+                 * mode here if the x86 vbios hasn't already done the
+                 * work for us (so we prevent loading with completely
+                 * whacked vbios tables).
+                 */
                return -EINVAL;
+#else
+                return 0;
+#endif
        }
        MXM_MSG(dev, "MXMS Version %d.%d\n",
diff --git a/drivers/gpu/drm/nouveau/nv50_pm.c b/drivers/gpu/drm/nouveau/nv50_pm.c
index 03937212e9d8..ec5481dfcd82 100644
--- a/drivers/gpu/drm/nouveau/nv50_pm.c
+++ b/drivers/gpu/drm/nouveau/nv50_pm.c
@@ -495,9 +495,9 @@ nv50_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl)
        struct drm_nouveau_private *dev_priv = dev->dev_private;
        struct nv50_pm_state *info;
        struct pll_lims pll;
-        int ret = -EINVAL;
+        int clk, ret = -EINVAL;
        int N, M, P1, P2;
-        u32 clk, out;
+        u32 out;
        if (dev_priv->chipset == 0xaa ||
            dev_priv->chipset == 0xac)
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 891935271d34..742f17f009a9 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1184,7 +1184,7 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc,
        WREG32(EVERGREEN_GRPH_ENABLE + radeon_crtc->crtc_offset, 1);
        WREG32(EVERGREEN_DESKTOP_HEIGHT + radeon_crtc->crtc_offset,
-               crtc->mode.vdisplay);
+               target_fb->height);
        x &= ~3;
        y &= ~1;
        WREG32(EVERGREEN_VIEWPORT_START + radeon_crtc->crtc_offset,
@@ -1353,7 +1353,7 @@ static int avivo_crtc_do_set_base(struct drm_crtc *crtc,
        WREG32(AVIVO_D1GRPH_ENABLE + radeon_crtc->crtc_offset, 1);
        WREG32(AVIVO_D1MODE_DESKTOP_HEIGHT + radeon_crtc->crtc_offset,
-               crtc->mode.vdisplay);
+               target_fb->height);
        x &= ~3;
        y &= ~1;
        WREG32(AVIVO_D1MODE_VIEWPORT_START + radeon_crtc->crtc_offset,
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index a71557ce01dc..552b436451fd 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -564,9 +564,21 @@ int radeon_dp_get_panel_mode(struct drm_encoder *encoder,
            ENCODER_OBJECT_ID_NUTMEG)
                panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE;
        else if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) ==
-                 ENCODER_OBJECT_ID_TRAVIS)
+                 ENCODER_OBJECT_ID_TRAVIS) {
-                panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
+                u8 id[6];
-        else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+                int i;
+                for (i = 0; i < 6; i++)
+                        id[i] = radeon_read_dpcd_reg(radeon_connector, 0x503 + i);
+                if (id[0] == 0x73 &&
+                    id[1] == 0x69 &&
+                    id[2] == 0x76 &&
+                    id[3] == 0x61 &&
+                    id[4] == 0x72 &&
+                    id[5] == 0x54)
+                        panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE;
+                else
+                        panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
+        } else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
                u8 tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP);
                if (tmp & 1)
                        panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c
index d996f4381130..accc032c103f 100644
--- a/drivers/gpu/drm/radeon/r600_blit_kms.c
+++ b/drivers/gpu/drm/radeon/r600_blit_kms.c
@@ -468,27 +468,42 @@ set_default_state(struct radeon_device *rdev)
        radeon_ring_write(ring, sq_stack_resource_mgmt_2);
 }
+#define I2F_MAX_BITS 15
+#define I2F_MAX_INPUT  ((1 << I2F_MAX_BITS) - 1)
+#define I2F_SHIFT (24 - I2F_MAX_BITS)
+/*
+ * Converts unsigned integer into 32-bit IEEE floating point representation.
+ * Conversion is not universal and only works for the range from 0
+ * to 2^I2F_MAX_BITS-1. Currently we only use it with inputs between
+ * 0 and 16384 (inclusive), so I2F_MAX_BITS=15 is enough. If necessary,
+ * I2F_MAX_BITS can be increased, but that will add to the loop iterations
+ * and slow us down. Conversion is done by shifting the input and counting
+ * down until the first 1 reaches bit position 23. The resulting counter
+ * and the shifted input are, respectively, the exponent and the fraction.
+ * The sign is always zero.
+ */
 static uint32_t i2f(uint32_t input)
 {
        u32 result, i, exponent, fraction;
-        if ((input & 0x3fff) == 0)
+        WARN_ON_ONCE(input > I2F_MAX_INPUT);
-                result = 0; /* 0 is a special case */
+        if ((input & I2F_MAX_INPUT) == 0)
+                result = 0;
        else {
-                exponent = 140; /* exponent biased by 127; */
+                exponent = 126 + I2F_MAX_BITS;
-                fraction = (input & 0x3fff) << 10; /* cheat and only
+                fraction = (input & I2F_MAX_INPUT) << I2F_SHIFT;
-                                                      handle numbers below 2^^15 */
-                for (i = 0; i < 14; i++) {
+                for (i = 0; i < I2F_MAX_BITS; i++) {
                        if (fraction & 0x800000)
                                break;
                        else {
-                                fraction = fraction << 1; /* keep
+                                fraction = fraction << 1;
-                                                             shifting left until top bit = 1 */
                                exponent = exponent - 1;
                        }
                }
-                result = exponent << 23 | (fraction & 0x7fffff); /* mask
+                result = exponent << 23 | (fraction & 0x7fffff);
-                                                                    off top bit; assumed 1 */
        }
        return result;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
index 13ac63ba6075..98724fcb0088 100644
--- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c
+++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
@@ -59,8 +59,9 @@ static int radeon_atrm_call(acpi_handle atrm_handle, uint8_t *bios,
        obj = (union acpi_object *)buffer.pointer;
        memcpy(bios+offset, obj->buffer.pointer, obj->buffer.length);
+        len = obj->buffer.length;
        kfree(buffer.pointer);
-        return obj->buffer.length;
+        return len;
 }
 bool radeon_atrm_supported(struct pci_dev *pdev)
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index cec51a5b69dd..49f7cb7e226b 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -883,6 +883,8 @@ int radeon_suspend_kms(struct drm_device *dev, pm_message_t state)
        if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
                return 0;
+        drm_kms_helper_poll_disable(dev);
        /* turn off display hw */
        list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
                drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
@@ -972,6 +974,8 @@ int radeon_resume_kms(struct drm_device *dev)
        list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
                drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
        }
+        drm_kms_helper_poll_enable(dev);
        return 0;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
index 7bb1b079f480..98a8ad680109 100644
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -897,6 +897,7 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
        i2c->rec = *rec;
        i2c->adapter.owner = THIS_MODULE;
        i2c->adapter.class = I2C_CLASS_DDC;
+        i2c->adapter.dev.parent = &dev->pdev->dev;
        i2c->dev = dev;
        i2c_set_adapdata(&i2c->adapter, i2c);
        if (rec->mm_i2c ||
@@ -957,6 +958,7 @@ struct radeon_i2c_chan *radeon_i2c_create_dp(struct drm_device *dev,
        i2c->rec = *rec;
        i2c->adapter.owner = THIS_MODULE;
        i2c->adapter.class = I2C_CLASS_DDC;
+        i2c->adapter.dev.parent = &dev->pdev->dev;
        i2c->dev = dev;
        snprintf(i2c->adapter.name, sizeof(i2c->adapter.name),
                 "Radeon aux bus %s", name);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index 0af6ebdf205d..b66ef0e3cde1 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -378,7 +378,7 @@ int vmw_framebuffer_create_handle(struct drm_framebuffer *fb,
                                  unsigned int *handle)
 {
        if (handle)
-                handle = 0;
+                *handle = 0;
        return 0;
 }
diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c
index 92f949767ece..6dbfd3e516e4 100644
--- a/drivers/hwmon/f71805f.c
+++ b/drivers/hwmon/f71805f.c
@@ -283,11 +283,11 @@ static inline long temp_from_reg(u8 reg)
 static inline u8 temp_to_reg(long val)
 {
-        if (val < 0)
+        if (val <= 0)
-                val = 0;
+                return 0;
-        else if (val > 1000 * 0xff)
+        if (val >= 1000 * 0xff)
-                val = 0xff;
+                return 0xff;
-        return ((val + 500) / 1000);
+        return (val + 500) / 1000;
 }
 /*
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 6ddeae049058..91fdd1fe18b0 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -883,7 +883,7 @@ static int sht15_invalidate_voltage(struct notifier_block *nb,
 static int __devinit sht15_probe(struct platform_device *pdev)
 {
-        int ret = 0;
+        int ret;
        struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL);
        u8 status = 0;
@@ -901,6 +901,7 @@ static int __devinit sht15_probe(struct platform_device *pdev)
        init_waitqueue_head(&data->wait_queue);
        if (pdev->dev.platform_data == NULL) {
+                ret = -EINVAL;
                dev_err(&pdev->dev, "no platform data supplied\n");
                goto err_free_data;
        }
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 0e0af0445222..2dfae7d7cc5b 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1319,6 +1319,7 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr,
 {
        struct w83627ehf_data *data = dev_get_drvdata(dev);
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+        struct w83627ehf_sio_data *sio_data = dev->platform_data;
        int nr = sensor_attr->index;
        unsigned long val;
        int err;
@@ -1330,6 +1331,11 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr,
        if (val > 1)
                return -EINVAL;
+        /* On NCT67766F, DC mode is only supported for pwm1 */
+        if (sio_data->kind == nct6776 && nr && val != 1)
+                return -EINVAL;
        mutex_lock(&data->update_lock);
        reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
        data->pwm_mode[nr] = val;
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index b37b0c02a7b9..5034a87cc72d 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -808,9 +808,12 @@ static ssize_t ucma_accept(struct ucma_file *file, const char __user *inbuf,
                return PTR_ERR(ctx);
        if (cmd.conn_param.valid) {
-                ctx->uid = cmd.uid;
                ucma_copy_conn_param(&conn_param, &cmd.conn_param);
+                mutex_lock(&file->mut);
                ret = rdma_accept(ctx->cm_id, &conn_param);
+                if (!ret)
+                        ctx->uid = cmd.uid;
+                mutex_unlock(&file->mut);
        } else
                ret = rdma_accept(ctx->cm_id, NULL);
diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c
index b930da4c0c63..4d27e4c3fe34 100644
--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -1485,6 +1485,7 @@ ssize_t ib_uverbs_create_qp(struct ib_uverbs_file *file,
                qp->event_handler = attr.event_handler;
                qp->qp_context    = attr.qp_context;
                qp->qp_type       = attr.qp_type;
+                atomic_set(&qp->usecnt, 0);
                atomic_inc(&pd->usecnt);
                atomic_inc(&attr.send_cq->usecnt);
                if (attr.recv_cq)
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index 602b1bd723a9..575b78045aaf 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -421,6 +421,7 @@ struct ib_qp *ib_create_qp(struct ib_pd *pd,
                qp->uobject    = NULL;
                qp->qp_type    = qp_init_attr->qp_type;
+                atomic_set(&qp->usecnt, 0);
                if (qp_init_attr->qp_type == IB_QPT_XRC_TGT) {
                        qp->event_handler = __ib_shared_qp_event_handler;
                        qp->qp_context = qp;
@@ -430,7 +431,6 @@ struct ib_qp *ib_create_qp(struct ib_pd *pd,
                        qp->xrcd = qp_init_attr->xrcd;
                        atomic_inc(&qp_init_attr->xrcd->usecnt);
                        INIT_LIST_HEAD(&qp->open_list);
-                        atomic_set(&qp->usecnt, 0);
                        real_qp = qp;
                        qp = __ib_open_qp(real_qp, qp_init_attr->event_handler,
diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c
index b7d4216db3c3..a4de9d58e9b4 100644
--- a/drivers/infiniband/hw/ipath/ipath_fs.c
+++ b/drivers/infiniband/hw/ipath/ipath_fs.c
@@ -89,7 +89,7 @@ static int create_file(const char *name, umode_t mode,
                error = ipathfs_mknod(parent->d_inode, *dentry,
                                      mode, fops, data);
        else
-                error = PTR_ERR(dentry);
+                error = PTR_ERR(*dentry);
        mutex_unlock(&parent->d_inode->i_mutex);
        return error;
diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c
index 95c94d8f0254..259b0670b51c 100644
--- a/drivers/infiniband/hw/mlx4/mad.c
+++ b/drivers/infiniband/hw/mlx4/mad.c
@@ -257,12 +257,9 @@ static int ib_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
                        return IB_MAD_RESULT_SUCCESS;
                /*
-                 * Don't process SMInfo queries or vendor-specific
+                 * Don't process SMInfo queries -- the SMA can't handle them.
-                 * MADs -- the SMA can't handle them.
                 */
-                if (in_mad->mad_hdr.attr_id == IB_SMP_ATTR_SM_INFO ||
+                if (in_mad->mad_hdr.attr_id == IB_SMP_ATTR_SM_INFO)
-                    ((in_mad->mad_hdr.attr_id & IB_SMP_ATTR_VENDOR_MASK) ==
-                     IB_SMP_ATTR_VENDOR_MASK))
                        return IB_MAD_RESULT_SUCCESS;
        } else if (in_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_PERF_MGMT ||
                   in_mad->mad_hdr.mgmt_class == MLX4_IB_VENDOR_CLASS1   ||
diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c
index 7013da5e9eda..7140199f562e 100644
--- a/drivers/infiniband/hw/nes/nes.c
+++ b/drivers/infiniband/hw/nes/nes.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
 * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
 *
 * This software is available to you under a choice of one of two
diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h
index 568b4f11380a..c438e4691b3c 100644
--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
 * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
 *
 * This software is available to you under a choice of one of two
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 425065b36b8c..a4972abedef1 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
@@ -233,6 +233,7 @@ static int send_mpa_reject(struct nes_cm_node *cm_node)
        u8 *start_ptr = &start_addr;
        u8 **start_buff = &start_ptr;
        u16 buff_len = 0;
+        struct ietf_mpa_v1 *mpa_frame;
        skb = dev_alloc_skb(MAX_CM_BUFFER);
        if (!skb) {
@@ -242,6 +243,8 @@ static int send_mpa_reject(struct nes_cm_node *cm_node)
        /* send an MPA reject frame */
        cm_build_mpa_frame(cm_node, start_buff, &buff_len, NULL, MPA_KEY_REPLY);
+        mpa_frame = (struct ietf_mpa_v1 *)*start_buff;
+        mpa_frame->flags |= IETF_MPA_FLAGS_REJECT;
        form_cm_frame(skb, cm_node, NULL, 0, *start_buff, buff_len, SET_ACK | SET_FIN);
        cm_node->state = NES_CM_STATE_FIN_WAIT1;
@@ -1360,8 +1363,7 @@ static int nes_addr_resolve_neigh(struct nes_vnic *nesvnic, u32 dst_ip, int arpi
                                if (!memcmp(nesadapter->arp_table[arpindex].mac_addr,
                                            neigh->ha, ETH_ALEN)) {
                                        /* Mac address same as in nes_arp_table */
-                                        ip_rt_put(rt);
+                                        goto out;
-                                        return rc;
                                }
                                nes_manage_arp_cache(nesvnic->netdev,
@@ -1377,6 +1379,8 @@ static int nes_addr_resolve_neigh(struct nes_vnic *nesvnic, u32 dst_ip, int arpi
                        neigh_event_send(neigh, NULL);
                }
        }
+out:
        rcu_read_unlock();
        ip_rt_put(rt);
        return rc;
diff --git a/drivers/infiniband/hw/nes/nes_cm.h b/drivers/infiniband/hw/nes/nes_cm.h
index bdfa1fbb35fc..4646e6666087 100644
--- a/drivers/infiniband/hw/nes/nes_cm.h
+++ b/drivers/infiniband/hw/nes/nes_cm.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_context.h b/drivers/infiniband/hw/nes/nes_context.h
index b4393a16099d..a69eef16d72d 100644
--- a/drivers/infiniband/hw/nes/nes_context.h
+++ b/drivers/infiniband/hw/nes/nes_context.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 055f4b545df0..d42c9f435b1b 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index 0b590e152c6a..d748e4b31b8d 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -1,5 +1,5 @@
 /*
-* Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+* Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_mgt.c b/drivers/infiniband/hw/nes/nes_mgt.c
index b3b2a240c6e9..3ba7be369452 100644
--- a/drivers/infiniband/hw/nes/nes_mgt.c
+++ b/drivers/infiniband/hw/nes/nes_mgt.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel-NE, Inc.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel-NE, Inc.  All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_mgt.h b/drivers/infiniband/hw/nes/nes_mgt.h
index 8c8af254555a..4f7f701c4a81 100644
--- a/drivers/infiniband/hw/nes/nes_mgt.h
+++ b/drivers/infiniband/hw/nes/nes_mgt.h
@@ -1,5 +1,5 @@
 /*
-* Copyright (c) 2010 Intel-NE, Inc.  All rights reserved.
+* Copyright (c) 2006 - 2011 Intel-NE, Inc.  All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index 4b3fa711a247..f3a3ecf8d09e 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_user.h b/drivers/infiniband/hw/nes/nes_user.h
index 71e133ab209b..4926de744488 100644
--- a/drivers/infiniband/hw/nes/nes_user.h
+++ b/drivers/infiniband/hw/nes/nes_user.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
 * Copyright (c) 2005 Topspin Communications.  All rights reserved.
 * Copyright (c) 2005 Cisco Systems.  All rights reserved.
 * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
diff --git a/drivers/infiniband/hw/nes/nes_utils.c b/drivers/infiniband/hw/nes/nes_utils.c
index 8b4c2ff54888..e98f4fc0b768 100644
--- a/drivers/infiniband/hw/nes/nes_utils.c
+++ b/drivers/infiniband/hw/nes/nes_utils.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 5095bc41c6cc..0927b5cc65d3 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
@@ -3428,6 +3428,8 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr,
                                            NES_IWARP_SQ_FMR_WQE_LENGTH_LOW_IDX,
                                            ib_wr->wr.fast_reg.length);
                        set_wqe_32bit_value(wqe->wqe_words,
+                                            NES_IWARP_SQ_FMR_WQE_LENGTH_HIGH_IDX, 0);
+                        set_wqe_32bit_value(wqe->wqe_words,
                                            NES_IWARP_SQ_FMR_WQE_MR_STAG_IDX,
                                            ib_wr->wr.fast_reg.rkey);
                        /* Set page size: */
@@ -3724,7 +3726,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry)
                                                entry->opcode = IB_WC_SEND;
                                                break;
                                        case NES_IWARP_SQ_OP_LOCINV:
-                                                entry->opcode = IB_WR_LOCAL_INV;
+                                                entry->opcode = IB_WC_LOCAL_INV;
                                                break;
                                        case NES_IWARP_SQ_OP_FAST_REG:
                                                entry->opcode = IB_WC_FAST_REG_MR;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.h b/drivers/infiniband/hw/nes/nes_verbs.h
index fe6b6e92fa90..0eff7c44d76b 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.h
+++ b/drivers/infiniband/hw/nes/nes_verbs.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006 - 2009 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
 * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
 *
 * This software is available to you under a choice of one of two
diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c
index 4f18e2d332df..d0c64d514813 100644
--- a/drivers/infiniband/hw/qib/qib_iba6120.c
+++ b/drivers/infiniband/hw/qib/qib_iba6120.c
@@ -2105,7 +2105,7 @@ static void alloc_dummy_hdrq(struct qib_devdata *dd)
        dd->cspec->dummy_hdrq = dma_alloc_coherent(&dd->pcidev->dev,
                                        dd->rcd[0]->rcvhdrq_size,
                                        &dd->cspec->dummy_hdrq_phys,
-                                        GFP_KERNEL | __GFP_COMP);
+                                        GFP_ATOMIC | __GFP_COMP);
        if (!dd->cspec->dummy_hdrq) {
                qib_devinfo(dd->pcidev, "Couldn't allocate dummy hdrq\n");
                /* fallback to just 0'ing */
diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index f695061d688e..0fde788e1100 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -560,7 +560,7 @@ static int qib_tune_pcie_coalesce(struct qib_devdata *dd)
 * BIOS may not set PCIe bus-utilization parameters for best performance.
 * Check and optionally adjust them to maximize our throughput.
 */
-static int qib_pcie_caps = 0x51;
+static int qib_pcie_caps;
 module_param_named(pcie_caps, qib_pcie_caps, int, S_IRUGO);
 MODULE_PARM_DESC(pcie_caps, "Max PCIe tuning: Payload (0..3), ReadReq (4..7)");
diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c
index 63be60bc3455..86cc3f7841cd 100644
--- a/drivers/mfd/mcp-core.c
+++ b/drivers/mfd/mcp-core.c
@@ -26,35 +26,9 @@
 #define to_mcp(d)               container_of(d, struct mcp, attached_device)
 #define to_mcp_driver(d)        container_of(d, struct mcp_driver, drv)
-static const struct mcp_device_id *mcp_match_id(const struct mcp_device_id *id,
-                                                const char *codec)
-{
-        while (id->name[0]) {
-                if (strcmp(codec, id->name) == 0)
-                        return id;
-                id++;
-        }
-        return NULL;
-}
-const struct mcp_device_id *mcp_get_device_id(const struct mcp *mcp)
-{
-        const struct mcp_driver *driver =
-                to_mcp_driver(mcp->attached_device.driver);
-        return mcp_match_id(driver->id_table, mcp->codec);
-}
-EXPORT_SYMBOL(mcp_get_device_id);
 static int mcp_bus_match(struct device *dev, struct device_driver *drv)
 {
-        const struct mcp *mcp = to_mcp(dev);
+        return 1;
-        const struct mcp_driver *driver = to_mcp_driver(drv);
-        if (driver->id_table)
-                return !!mcp_match_id(driver->id_table, mcp->codec);
-        return 0;
 }
 static int mcp_bus_probe(struct device *dev)
@@ -100,18 +74,9 @@ static int mcp_bus_resume(struct device *dev)
        return ret;
 }
-static int mcp_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-        struct mcp *mcp = to_mcp(dev);
-        add_uevent_var(env, "MODALIAS=%s%s", MCP_MODULE_PREFIX, mcp->codec);
-        return 0;
-}
 static struct bus_type mcp_bus_type = {
        .name           = "mcp",
        .match          = mcp_bus_match,
-        .uevent         = mcp_bus_uevent,
        .probe          = mcp_bus_probe,
        .remove         = mcp_bus_remove,
        .suspend        = mcp_bus_suspend,
@@ -128,9 +93,11 @@ static struct bus_type mcp_bus_type = {
 */
 void mcp_set_telecom_divisor(struct mcp *mcp, unsigned int div)
 {
-        spin_lock_irq(&mcp->lock);
+        unsigned long flags;
+        spin_lock_irqsave(&mcp->lock, flags);
        mcp->ops->set_telecom_divisor(mcp, div);
-        spin_unlock_irq(&mcp->lock);
+        spin_unlock_irqrestore(&mcp->lock, flags);
 }
 EXPORT_SYMBOL(mcp_set_telecom_divisor);
@@ -143,9 +110,11 @@ EXPORT_SYMBOL(mcp_set_telecom_divisor);
 */
 void mcp_set_audio_divisor(struct mcp *mcp, unsigned int div)
 {
-        spin_lock_irq(&mcp->lock);
+        unsigned long flags;
+        spin_lock_irqsave(&mcp->lock, flags);
        mcp->ops->set_audio_divisor(mcp, div);
-        spin_unlock_irq(&mcp->lock);
+        spin_unlock_irqrestore(&mcp->lock, flags);
 }
 EXPORT_SYMBOL(mcp_set_audio_divisor);
@@ -198,10 +167,11 @@ EXPORT_SYMBOL(mcp_reg_read);
 */
 void mcp_enable(struct mcp *mcp)
 {
-        spin_lock_irq(&mcp->lock);
+        unsigned long flags;
+        spin_lock_irqsave(&mcp->lock, flags);
        if (mcp->use_count++ == 0)
                mcp->ops->enable(mcp);
-        spin_unlock_irq(&mcp->lock);
+        spin_unlock_irqrestore(&mcp->lock, flags);
 }
 EXPORT_SYMBOL(mcp_enable);
@@ -247,14 +217,9 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size)
 }
 EXPORT_SYMBOL(mcp_host_alloc);
-int mcp_host_register(struct mcp *mcp, void *pdata)
+int mcp_host_register(struct mcp *mcp)
 {
-        if (!mcp->codec)
-                return -EINVAL;
-        mcp->attached_device.platform_data = pdata;
        dev_set_name(&mcp->attached_device, "mcp0");
-        request_module("%s%s", MCP_MODULE_PREFIX, mcp->codec);
        return device_register(&mcp->attached_device);
 }
 EXPORT_SYMBOL(mcp_host_register);
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 9adc2eb69492..02c53a0766c4 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -19,7 +19,6 @@
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/mcp.h>
-#include <linux/io.h>
 #include <mach/dma.h>
 #include <mach/hardware.h>
@@ -27,19 +26,12 @@
 #include <asm/system.h>
 #include <mach/mcp.h>
-/* Register offsets */
+#include <mach/assabet.h>
-#define MCCR0   0x00
-#define MCDR0   0x08
-#define MCDR1   0x0C
-#define MCDR2   0x10
-#define MCSR    0x18
-#define MCCR1   0x00
 struct mcp_sa11x0 {
-        u32             mccr0;
+        u32     mccr0;
-        u32             mccr1;
+        u32     mccr1;
-        unsigned char   *mccr0_base;
-        unsigned char   *mccr1_base;
 };
 #define priv(mcp)       ((struct mcp_sa11x0 *)mcp_priv(mcp))
@@ -47,25 +39,25 @@ struct mcp_sa11x0 {
 static void
 mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor)
 {
-        struct mcp_sa11x0 *priv = priv(mcp);
+        unsigned int mccr0;
        divisor /= 32;
-        priv->mccr0 &= ~0x00007f00;
+        mccr0 = Ser4MCCR0 & ~0x00007f00;
-        priv->mccr0 |= divisor << 8;
+        mccr0 |= divisor << 8;
-        __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
+        Ser4MCCR0 = mccr0;
 }
 static void
 mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
 {
-        struct mcp_sa11x0 *priv = priv(mcp);
+        unsigned int mccr0;
        divisor /= 32;
-        priv->mccr0 &= ~0x0000007f;
+        mccr0 = Ser4MCCR0 & ~0x0000007f;
-        priv->mccr0 |= divisor;
+        mccr0 |= divisor;
-        __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
+        Ser4MCCR0 = mccr0;
 }
 /*
@@ -79,16 +71,12 @@ mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
 {
        int ret = -ETIME;
        int i;
-        u32 mcpreg;
-        struct mcp_sa11x0 *priv = priv(mcp);
-        mcpreg = reg << 17 | MCDR2_Wr | (val & 0xffff);
+        Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff);
-        __raw_writel(mcpreg, priv->mccr0_base + MCDR2);
        for (i = 0; i < 2; i++) {
                udelay(mcp->rw_timeout);
-                mcpreg = __raw_readl(priv->mccr0_base + MCSR);
+                if (Ser4MCSR & MCSR_CWC) {
-                if (mcpreg & MCSR_CWC) {
                        ret = 0;
                        break;
                }
@@ -109,18 +97,13 @@ mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
 {
        int ret = -ETIME;
        int i;
-        u32 mcpreg;
-        struct mcp_sa11x0 *priv = priv(mcp);
-        mcpreg = reg << 17 | MCDR2_Rd;
+        Ser4MCDR2 = reg << 17 | MCDR2_Rd;
-        __raw_writel(mcpreg, priv->mccr0_base + MCDR2);
        for (i = 0; i < 2; i++) {
                udelay(mcp->rw_timeout);
-                mcpreg = __raw_readl(priv->mccr0_base + MCSR);
+                if (Ser4MCSR & MCSR_CRC) {
-                if (mcpreg & MCSR_CRC) {
+                        ret = Ser4MCDR2 & 0xffff;
-                        ret = __raw_readl(priv->mccr0_base + MCDR2)
-                                & 0xffff;
                        break;
                }
        }
@@ -133,19 +116,13 @@ mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
 static void mcp_sa11x0_enable(struct mcp *mcp)
 {
-        struct mcp_sa11x0 *priv = priv(mcp);
+        Ser4MCSR = -1;
+        Ser4MCCR0 |= MCCR0_MCE;
-        __raw_writel(-1, priv->mccr0_base + MCSR);
-        priv->mccr0 |= MCCR0_MCE;
-        __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
 }
 static void mcp_sa11x0_disable(struct mcp *mcp)
 {
-        struct mcp_sa11x0 *priv = priv(mcp);
+        Ser4MCCR0 &= ~MCCR0_MCE;
-        priv->mccr0 &= ~MCCR0_MCE;
-        __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
 }
 /*
@@ -165,69 +142,50 @@ static int mcp_sa11x0_probe(struct platform_device *pdev)
        struct mcp_plat_data *data = pdev->dev.platform_data;
        struct mcp *mcp;
        int ret;
-        struct mcp_sa11x0 *priv;
-        struct resource *res_mem0, *res_mem1;
-        u32 size0, size1;
        if (!data)
                return -ENODEV;
-        if (!data->codec)
+        if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp"))
-                return -ENODEV;
-        res_mem0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        if (!res_mem0)
-                return -ENODEV;
-        size0 = res_mem0->end - res_mem0->start + 1;
-        res_mem1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-        if (!res_mem1)
-                return -ENODEV;
-        size1 = res_mem1->end - res_mem1->start + 1;
-        if (!request_mem_region(res_mem0->start, size0, "sa11x0-mcp"))
                return -EBUSY;
-        if (!request_mem_region(res_mem1->start, size1, "sa11x0-mcp")) {
-                ret = -EBUSY;
-                goto release;
-        }
        mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0));
        if (!mcp) {
                ret = -ENOMEM;
-                goto release2;
+                goto release;
        }
-        priv = priv(mcp);
        mcp->owner              = THIS_MODULE;
        mcp->ops                = &mcp_sa11x0;
        mcp->sclk_rate          = data->sclk_rate;
-        mcp->dma_audio_rd       = DDAR_DevAdd(res_mem0->start + MCDR0)
+        mcp->dma_audio_rd       = DMA_Ser4MCP0Rd;
-                                + DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev;
+        mcp->dma_audio_wr       = DMA_Ser4MCP0Wr;
-        mcp->dma_audio_wr       = DDAR_DevAdd(res_mem0->start + MCDR0)
+        mcp->dma_telco_rd       = DMA_Ser4MCP1Rd;
-                                + DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev;
+        mcp->dma_telco_wr       = DMA_Ser4MCP1Wr;
-        mcp->dma_telco_rd       = DDAR_DevAdd(res_mem0->start + MCDR1)
+        mcp->gpio_base          = data->gpio_base;
-                                + DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev;
-        mcp->dma_telco_wr       = DDAR_DevAdd(res_mem0->start + MCDR1)
-                                + DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev;
-        mcp->codec              = data->codec;
        platform_set_drvdata(pdev, mcp);
+        if (machine_is_assabet()) {
+                ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
+        }
+        /*
+         * Setup the PPC unit correctly.
+         */
+        PPDR &= ~PPC_RXD4;
+        PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+        PSDR |= PPC_RXD4;
+        PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+        PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
        /*
         * Initialise device.  Note that we initially
         * set the sampling rate to minimum.
         */
-        priv->mccr0_base = ioremap(res_mem0->start, size0);
+        Ser4MCSR = -1;
-        priv->mccr1_base = ioremap(res_mem1->start, size1);
+        Ser4MCCR1 = data->mccr1;
+        Ser4MCCR0 = data->mccr0 | 0x7f7f;
-        __raw_writel(-1, priv->mccr0_base + MCSR);
-        priv->mccr1 = data->mccr1;
-        priv->mccr0 = data->mccr0 | 0x7f7f;
-        __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
-        __raw_writel(priv->mccr1, priv->mccr1_base + MCCR1);
        /*
         * Calculate the read/write timeout (us) from the bit clock
@@ -237,53 +195,36 @@ static int mcp_sa11x0_probe(struct platform_device *pdev)
        mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) /
                          mcp->sclk_rate;
-        ret = mcp_host_register(mcp, data->codec_pdata);
+        ret = mcp_host_register(mcp);
        if (ret == 0)
                goto out;
- release2:
-        release_mem_region(res_mem1->start, size1);
 release:
-        release_mem_region(res_mem0->start, size0);
+        release_mem_region(0x80060000, 0x60);
        platform_set_drvdata(pdev, NULL);
 out:
        return ret;
 }
-static int mcp_sa11x0_remove(struct platform_device *pdev)
+static int mcp_sa11x0_remove(struct platform_device *dev)
 {
-        struct mcp *mcp = platform_get_drvdata(pdev);
+        struct mcp *mcp = platform_get_drvdata(dev);
-        struct mcp_sa11x0 *priv = priv(mcp);
-        struct resource *res_mem;
-        u32 size;
-        platform_set_drvdata(pdev, NULL);
+        platform_set_drvdata(dev, NULL);
        mcp_host_unregister(mcp);
+        release_mem_region(0x80060000, 0x60);
-        res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        if (res_mem) {
-                size = res_mem->end - res_mem->start + 1;
-                release_mem_region(res_mem->start, size);
-        }
-        res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-        if (res_mem) {
-                size = res_mem->end - res_mem->start + 1;
-                release_mem_region(res_mem->start, size);
-        }
-        iounmap(priv->mccr0_base);
-        iounmap(priv->mccr1_base);
        return 0;
 }
 static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state)
 {
        struct mcp *mcp = platform_get_drvdata(dev);
-        struct mcp_sa11x0 *priv = priv(mcp);
-        u32 mccr0;
-        mccr0 = priv->mccr0 & ~MCCR0_MCE;
+        priv(mcp)->mccr0 = Ser4MCCR0;
-        __raw_writel(mccr0, priv->mccr0_base + MCCR0);
+        priv(mcp)->mccr1 = Ser4MCCR1;
+        Ser4MCCR0 &= ~MCCR0_MCE;
        return 0;
 }
@@ -291,10 +232,9 @@ static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state)
 static int mcp_sa11x0_resume(struct platform_device *dev)
 {
        struct mcp *mcp = platform_get_drvdata(dev);
-        struct mcp_sa11x0 *priv = priv(mcp);
-        __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0);
+        Ser4MCCR1 = priv(mcp)->mccr1;
-        __raw_writel(priv->mccr1, priv->mccr1_base + MCCR1);
+        Ser4MCCR0 = priv(mcp)->mccr0;
        return 0;
 }
@@ -311,7 +251,6 @@ static struct platform_driver mcp_sa11x0_driver = {
        .resume         = mcp_sa11x0_resume,
        .driver         = {
                .name   = "sa11x0-mcp",
-                .owner  = THIS_MODULE,
        },
 };
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index 91c4f25e0e55..febc90cdef7e 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -36,15 +36,6 @@ static DEFINE_MUTEX(ucb1x00_mutex);
 static LIST_HEAD(ucb1x00_drivers);
 static LIST_HEAD(ucb1x00_devices);
-static struct mcp_device_id ucb1x00_id[] = {
-        { "ucb1x00", 0 },  /* auto-detection */
-        { "ucb1200", UCB_ID_1200 },
-        { "ucb1300", UCB_ID_1300 },
-        { "tc35143", UCB_ID_TC35143 },
-        { }
-};
-MODULE_DEVICE_TABLE(mcp, ucb1x00_id);
 /**
 *      ucb1x00_io_set_dir - set IO direction
 *      @ucb: UCB1x00 structure describing chip
@@ -157,16 +148,22 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
 {
        struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
        unsigned long flags;
+        unsigned old, mask = 1 << offset;
        spin_lock_irqsave(&ucb->io_lock, flags);
-        ucb->io_dir |= (1 << offset);
+        old = ucb->io_out;
-        ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
        if (value)
-                ucb->io_out |= 1 << offset;
+                ucb->io_out |= mask;
        else
-                ucb->io_out &= ~(1 << offset);
+                ucb->io_out &= ~mask;
-        ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+        if (old != ucb->io_out)
+                ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+        if (!(ucb->io_dir & mask)) {
+                ucb->io_dir |= mask;
+                ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+        }
        spin_unlock_irqrestore(&ucb->io_lock, flags);
        return 0;
@@ -536,33 +533,17 @@ static struct class ucb1x00_class = {
 static int ucb1x00_probe(struct mcp *mcp)
 {
-        const struct mcp_device_id *mid;
        struct ucb1x00 *ucb;
        struct ucb1x00_driver *drv;
-        struct ucb1x00_plat_data *pdata;
        unsigned int id;
        int ret = -ENODEV;
        int temp;
        mcp_enable(mcp);
        id = mcp_reg_read(mcp, UCB_ID);
-        mid = mcp_get_device_id(mcp);
-        if (mid && mid->driver_data) {
+        if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) {
-                if (id != mid->driver_data) {
+                printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
-                        printk(KERN_WARNING "%s wrong ID %04x found: %04x\n",
-                                mid->name, (unsigned int) mid->driver_data, id);
-                        goto err_disable;
-                }
-        } else {
-                mid = &ucb1x00_id[1];
-                while (mid->driver_data) {
-                        if (id == mid->driver_data)
-                                break;
-                        mid++;
-                }
-                printk(KERN_WARNING "%s ID not found: %04x\n",
-                        ucb1x00_id[0].name, id);
                goto err_disable;
        }
@@ -571,28 +552,28 @@ static int ucb1x00_probe(struct mcp *mcp)
        if (!ucb)
                goto err_disable;
-        pdata = mcp->attached_device.platform_data;
        ucb->dev.class = &ucb1x00_class;
        ucb->dev.parent = &mcp->attached_device;
-        dev_set_name(&ucb->dev, mid->name);
+        dev_set_name(&ucb->dev, "ucb1x00");
        spin_lock_init(&ucb->lock);
        spin_lock_init(&ucb->io_lock);
        sema_init(&ucb->adc_sem, 1);
-        ucb->id  = mid;
+        ucb->id  = id;
        ucb->mcp = mcp;
        ucb->irq = ucb1x00_detect_irq(ucb);
        if (ucb->irq == NO_IRQ) {
-                printk(KERN_ERR "%s: IRQ probe failed\n", mid->name);
+                printk(KERN_ERR "UCB1x00: IRQ probe failed\n");
                ret = -ENODEV;
                goto err_free;
        }
        ucb->gpio.base = -1;
-        if (pdata && (pdata->gpio_base >= 0)) {
+        if (mcp->gpio_base != 0) {
                ucb->gpio.label = dev_name(&ucb->dev);
-                ucb->gpio.base = pdata->gpio_base;
+                ucb->gpio.base = mcp->gpio_base;
                ucb->gpio.ngpio = 10;
                ucb->gpio.set = ucb1x00_gpio_set;
                ucb->gpio.get = ucb1x00_gpio_get;
@@ -605,10 +586,10 @@ static int ucb1x00_probe(struct mcp *mcp)
                dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
        ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
-                          mid->name, ucb);
+                          "UCB1x00", ucb);
        if (ret) {
-                printk(KERN_ERR "%s: unable to grab irq%d: %d\n",
+                printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
-                        mid->name, ucb->irq, ret);
+                        ucb->irq, ret);
                goto err_gpio;
        }
@@ -712,6 +693,7 @@ static int ucb1x00_resume(struct mcp *mcp)
        struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
        struct ucb1x00_dev *dev;
+        ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
        ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
        mutex_lock(&ucb1x00_mutex);
        list_for_each_entry(dev, &ucb->devs, dev_node) {
@@ -730,7 +712,6 @@ static struct mcp_driver ucb1x00_driver = {
        .remove         = ucb1x00_remove,
        .suspend        = ucb1x00_suspend,
        .resume         = ucb1x00_resume,
-        .id_table       = ucb1x00_id,
 };
 static int __init ucb1x00_init(void)
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index 40ec3c118868..63a3cbdfa3f3 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -47,7 +47,6 @@ struct ucb1x00_ts {
        u16                     x_res;
        u16                     y_res;
-        unsigned int            restart:1;
        unsigned int            adcsync:1;
 };
@@ -207,15 +206,17 @@ static int ucb1x00_thread(void *_ts)
 {
        struct ucb1x00_ts *ts = _ts;
        DECLARE_WAITQUEUE(wait, current);
+        bool frozen, ignore = false;
        int valid = 0;
        set_freezable();
        add_wait_queue(&ts->irq_wait, &wait);
-        while (!kthread_should_stop()) {
+        while (!kthread_freezable_should_stop(&frozen)) {
                unsigned int x, y, p;
                signed long timeout;
-                ts->restart = 0;
+                if (frozen)
+                        ignore = true;
                ucb1x00_adc_enable(ts->ucb);
@@ -258,7 +259,7 @@ static int ucb1x00_thread(void *_ts)
                         * space.  We therefore leave it to user space
                         * to do any filtering they please.
                         */
-                        if (!ts->restart) {
+                        if (!ignore) {
                                ucb1x00_ts_evt_add(ts, p, x, y);
                                valid = 1;
                        }
@@ -267,8 +268,6 @@ static int ucb1x00_thread(void *_ts)
                        timeout = HZ / 100;
                }
-                try_to_freeze();
                schedule_timeout(timeout);
        }
@@ -340,26 +339,6 @@ static void ucb1x00_ts_close(struct input_dev *idev)
        ucb1x00_disable(ts->ucb);
 }
-#ifdef CONFIG_PM
-static int ucb1x00_ts_resume(struct ucb1x00_dev *dev)
-{
-        struct ucb1x00_ts *ts = dev->priv;
-        if (ts->rtask != NULL) {
-                /*
-                 * Restart the TS thread to ensure the
-                 * TS interrupt mode is set up again
-                 * after sleep.
-                 */
-                ts->restart = 1;
-                wake_up(&ts->irq_wait);
-        }
-        return 0;
-}
-#else
-#define ucb1x00_ts_resume NULL
-#endif
 /*
 * Initialisation.
@@ -382,7 +361,7 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev)
        ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC;
        idev->name       = "Touchscreen panel";
-        idev->id.product = ts->ucb->id->driver_data;
+        idev->id.product = ts->ucb->id;
        idev->open       = ucb1x00_ts_open;
        idev->close      = ucb1x00_ts_close;
@@ -425,7 +404,6 @@ static void ucb1x00_ts_remove(struct ucb1x00_dev *dev)
 static struct ucb1x00_driver ucb1x00_ts_driver = {
        .add            = ucb1x00_ts_add,
        .remove         = ucb1x00_ts_remove,
-        .resume         = ucb1x00_ts_resume,
 };
 static int __init ucb1x00_ts_init(void)
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
index 752493f00406..65d1f05007be 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
@@ -972,11 +972,11 @@ void iwl_irq_tasklet(struct iwl_trans *trans)
        }
 #endif
-        spin_unlock_irqrestore(&trans->shrd->lock, flags);
        /* saved interrupt in inta variable now we can reset trans_pcie->inta */
        trans_pcie->inta = 0;
+        spin_unlock_irqrestore(&trans->shrd->lock, flags);
        /* Now service all interrupt bits discovered above. */
        if (inta & CSR_INT_BIT_HW_ERR) {
                IWL_ERR(trans, "Hardware error detected.  Restarting.\n");
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index fa679057630f..698b905058dd 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -68,7 +68,7 @@ struct netfront_cb {
 #define NET_TX_RING_SIZE __CONST_RING_SIZE(xen_netif_tx, PAGE_SIZE)
 #define NET_RX_RING_SIZE __CONST_RING_SIZE(xen_netif_rx, PAGE_SIZE)
-#define TX_MAX_TARGET min_t(int, NET_RX_RING_SIZE, 256)
+#define TX_MAX_TARGET min_t(int, NET_TX_RING_SIZE, 256)
 struct netfront_stats {
        u64                     rx_packets;
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 59866905ea37..27f2fe3b7fb4 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -205,7 +205,8 @@ static int __devexit pcmcia_remove(struct sa1111_dev *dev)
        dev_set_drvdata(&dev->dev, NULL);
-        for (; next = s->next, s; s = next) {
+        for (; s; s = next) {
+                next = s->next;
                soc_pcmcia_remove_one(&s->soc);
                kfree(s);
        }
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 569bdb3ef104..8fe15cf15ac8 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -510,10 +510,12 @@ static struct dentry *debugfs_root;
 static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev)
 {
-        static struct dentry *device_root;
+        struct dentry *device_root;
        device_root = debugfs_create_dir(dev_name(pctldev->dev),
                                         debugfs_root);
+        pctldev->device_root = device_root;
        if (IS_ERR(device_root) || !device_root) {
                pr_warn("failed to create debugfs directory for %s\n",
                        dev_name(pctldev->dev));
@@ -529,6 +531,11 @@ static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev)
        pinconf_init_device_debugfs(device_root, pctldev);
 }
+static void pinctrl_remove_device_debugfs(struct pinctrl_dev *pctldev)
+{
+        debugfs_remove_recursive(pctldev->device_root);
+}
 static void pinctrl_init_debugfs(void)
 {
        debugfs_root = debugfs_create_dir("pinctrl", NULL);
@@ -553,6 +560,10 @@ static void pinctrl_init_debugfs(void)
 {
 }
+static void pinctrl_remove_device_debugfs(struct pinctrl_dev *pctldev)
+{
+}
 #endif
 /**
@@ -572,40 +583,40 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
        if (pctldesc->name == NULL)
                return NULL;
+        pctldev = kzalloc(sizeof(struct pinctrl_dev), GFP_KERNEL);
+        if (pctldev == NULL)
+                return NULL;
+        /* Initialize pin control device struct */
+        pctldev->owner = pctldesc->owner;
+        pctldev->desc = pctldesc;
+        pctldev->driver_data = driver_data;
+        INIT_RADIX_TREE(&pctldev->pin_desc_tree, GFP_KERNEL);
+        spin_lock_init(&pctldev->pin_desc_tree_lock);
+        INIT_LIST_HEAD(&pctldev->gpio_ranges);
+        mutex_init(&pctldev->gpio_ranges_lock);
+        pctldev->dev = dev;
        /* If we're implementing pinmuxing, check the ops for sanity */
        if (pctldesc->pmxops) {
-                ret = pinmux_check_ops(pctldesc->pmxops);
+                ret = pinmux_check_ops(pctldev);
                if (ret) {
                        pr_err("%s pinmux ops lacks necessary functions\n",
                               pctldesc->name);
-                        return NULL;
+                        goto out_err;
                }
        }
        /* If we're implementing pinconfig, check the ops for sanity */
        if (pctldesc->confops) {
-                ret = pinconf_check_ops(pctldesc->confops);
+                ret = pinconf_check_ops(pctldev);
                if (ret) {
                        pr_err("%s pin config ops lacks necessary functions\n",
                               pctldesc->name);
-                        return NULL;
+                        goto out_err;
                }
        }
-        pctldev = kzalloc(sizeof(struct pinctrl_dev), GFP_KERNEL);
-        if (pctldev == NULL)
-                return NULL;
-        /* Initialize pin control device struct */
-        pctldev->owner = pctldesc->owner;
-        pctldev->desc = pctldesc;
-        pctldev->driver_data = driver_data;
-        INIT_RADIX_TREE(&pctldev->pin_desc_tree, GFP_KERNEL);
-        spin_lock_init(&pctldev->pin_desc_tree_lock);
-        INIT_LIST_HEAD(&pctldev->gpio_ranges);
-        mutex_init(&pctldev->gpio_ranges_lock);
-        pctldev->dev = dev;
        /* Register all the pins */
        pr_debug("try to register %d pins on %s...\n",
                 pctldesc->npins, pctldesc->name);
@@ -641,6 +652,7 @@ void pinctrl_unregister(struct pinctrl_dev *pctldev)
        if (pctldev == NULL)
                return;
+        pinctrl_remove_device_debugfs(pctldev);
        pinmux_unhog_maps(pctldev);
        /* TODO: check that no pinmuxes are still active? */
        mutex_lock(&pinctrldev_list_mutex);
diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h
index 177a3310547f..cfa86da6b4b1 100644
--- a/drivers/pinctrl/core.h
+++ b/drivers/pinctrl/core.h
@@ -41,6 +41,9 @@ struct pinctrl_dev {
        struct device *dev;
        struct module *owner;
        void *driver_data;
+#ifdef CONFIG_DEBUG_FS
+        struct dentry *device_root;
+#endif
 #ifdef CONFIG_PINMUX
        struct mutex pinmux_hogs_lock;
        struct list_head pinmux_hogs;
diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c
index 1259872b0a1d..9fb75456824c 100644
--- a/drivers/pinctrl/pinconf.c
+++ b/drivers/pinctrl/pinconf.c
@@ -205,8 +205,10 @@ int pin_config_group_set(const char *dev_name, const char *pin_group,
 }
 EXPORT_SYMBOL(pin_config_group_set);
-int pinconf_check_ops(const struct pinconf_ops *ops)
+int pinconf_check_ops(struct pinctrl_dev *pctldev)
 {
+        const struct pinconf_ops *ops = pctldev->desc->confops;
        /* We must be able to read out pin status */
        if (!ops->pin_config_get && !ops->pin_config_group_get)
                return -EINVAL;
@@ -236,7 +238,7 @@ static int pinconf_pins_show(struct seq_file *s, void *what)
        seq_puts(s, "Format: pin (name): pinmux setting array\n");
        /* The pin number can be retrived from the pin controller descriptor */
-        for (i = 0; pin < pctldev->desc->npins; i++) {
+        for (i = 0; i < pctldev->desc->npins; i++) {
                struct pin_desc *desc;
                pin = pctldev->desc->pins[i].number;
diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h
index e7dc6165032a..006b77fa737e 100644
--- a/drivers/pinctrl/pinconf.h
+++ b/drivers/pinctrl/pinconf.h
@@ -13,7 +13,7 @@
 #ifdef CONFIG_PINCONF
-int pinconf_check_ops(const struct pinconf_ops *ops);
+int pinconf_check_ops(struct pinctrl_dev *pctldev);
 void pinconf_init_device_debugfs(struct dentry *devroot,
                                 struct pinctrl_dev *pctldev);
 int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
@@ -23,7 +23,7 @@ int pin_config_set_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
 #else
-static inline int pinconf_check_ops(const struct pinconf_ops *ops)
+static inline int pinconf_check_ops(struct pinctrl_dev *pctldev)
 {
        return 0;
 }
diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c
index a76a348321bb..7c3193f7a044 100644
--- a/drivers/pinctrl/pinmux.c
+++ b/drivers/pinctrl/pinmux.c
@@ -53,11 +53,6 @@ struct pinmux_group {
 * @dev: the device using this pinmux
 * @usecount: the number of active users of this mux setting, used to keep
 *      track of nested use cases
- * @pins: an array of discrete physical pins used in this mapping, taken
- *      from the global pin enumeration space (copied from pinmux map)
- * @num_pins: the number of pins in this mapping array, i.e. the number of
- *      elements in .pins so we can iterate over that array (copied from
- *      pinmux map)
 * @pctldev: pin control device handling this pinmux
 * @func_selector: the function selector for the pinmux device handling
 *      this pinmux
@@ -152,8 +147,7 @@ static int pin_request(struct pinctrl_dev *pctldev,
                status = 0;
        if (status)
-                dev_err(pctldev->dev, "->request on device %s failed "
+                dev_err(pctldev->dev, "->request on device %s failed for pin %d\n",
-                       "for pin %d\n",
                       pctldev->desc->name, pin);
 out_free_pin:
        if (status) {
@@ -355,21 +349,20 @@ int __init pinmux_register_mappings(struct pinmux_map const *maps,
        /* First sanity check the new mapping */
        for (i = 0; i < num_maps; i++) {
                if (!maps[i].name) {
-                        pr_err("failed to register map %d: "
+                        pr_err("failed to register map %d: no map name given\n",
-                               "no map name given\n", i);
+                                        i);
                        return -EINVAL;
                }
                if (!maps[i].ctrl_dev && !maps[i].ctrl_dev_name) {
-                        pr_err("failed to register map %s (%d): "
+                        pr_err("failed to register map %s (%d): no pin control device given\n",
-                               "no pin control device given\n",
                               maps[i].name, i);
                        return -EINVAL;
                }
                if (!maps[i].function) {
-                        pr_err("failed to register map %s (%d): "
+                        pr_err("failed to register map %s (%d): no function ID given\n",
-                               "no function ID given\n", maps[i].name, i);
+                                        maps[i].name, i);
                        return -EINVAL;
                }
@@ -411,7 +404,7 @@ int __init pinmux_register_mappings(struct pinmux_map const *maps,
 }
 /**
- * acquire_pins() - acquire all the pins for a certain funcion on a pinmux
+ * acquire_pins() - acquire all the pins for a certain function on a pinmux
 * @pctldev: the device to take the pins on
 * @func_selector: the function selector to acquire the pins for
 * @group_selector: the group selector containing the pins to acquire
@@ -442,8 +435,7 @@ static int acquire_pins(struct pinctrl_dev *pctldev,
                ret = pin_request(pctldev, pins[i], func, NULL);
                if (ret) {
                        dev_err(pctldev->dev,
-                                "could not get pin %d for function %s "
+                                "could not get pin %d for function %s on device %s - conflicting mux mappings?\n",
-                                "on device %s - conflicting mux mappings?\n",
                                pins[i], func ? : "(undefined)",
                                pinctrl_dev_get_name(pctldev));
                        /* On error release all taken pins */
@@ -458,7 +450,7 @@ static int acquire_pins(struct pinctrl_dev *pctldev,
 /**
 * release_pins() - release pins taken by earlier acquirement
- * @pctldev: the device to free the pinx on
+ * @pctldev: the device to free the pins on
 * @group_selector: the group selector containing the pins to free
 */
 static void release_pins(struct pinctrl_dev *pctldev,
@@ -473,8 +465,7 @@ static void release_pins(struct pinctrl_dev *pctldev,
        ret = pctlops->get_group_pins(pctldev, group_selector,
                                      &pins, &num_pins);
        if (ret) {
-                dev_err(pctldev->dev, "could not get pins to release for "
+                dev_err(pctldev->dev, "could not get pins to release for group selector %d\n",
-                        "group selector %d\n",
                        group_selector);
                return;
        }
@@ -526,8 +517,7 @@ static int pinmux_check_pin_group(struct pinctrl_dev *pctldev,
                ret = pinctrl_get_group_selector(pctldev, groups[0]);
                if (ret < 0) {
                        dev_err(pctldev->dev,
-                                "function %s wants group %s but the pin "
+                                "function %s wants group %s but the pin controller does not seem to have that group\n",
-                                "controller does not seem to have that group\n",
                                pmxops->get_function_name(pctldev, func_selector),
                                groups[0]);
                        return ret;
@@ -535,8 +525,7 @@ static int pinmux_check_pin_group(struct pinctrl_dev *pctldev,
                if (num_groups > 1)
                        dev_dbg(pctldev->dev,
-                                "function %s support more than one group, "
+                                "function %s support more than one group, default-selecting first group %s (%d)\n",
-                                "default-selecting first group %s (%d)\n",
                                pmxops->get_function_name(pctldev, func_selector),
                                groups[0],
                                ret);
@@ -628,10 +617,8 @@ static int pinmux_enable_muxmap(struct pinctrl_dev *pctldev,
        if (pmx->pctldev && pmx->pctldev != pctldev) {
                dev_err(pctldev->dev,
-                        "different pin control devices given for device %s, "
+                        "different pin control devices given for device %s, function %s\n",
-                        "function %s\n",
+                        devname, map->function);
-                        devname,
-                        map->function);
                return -EINVAL;
        }
        pmx->dev = dev;
@@ -695,7 +682,6 @@ static void pinmux_free_groups(struct pinmux *pmx)
 */
 struct pinmux *pinmux_get(struct device *dev, const char *name)
 {
        struct pinmux_map const *map = NULL;
        struct pinctrl_dev *pctldev = NULL;
        const char *devname = NULL;
@@ -745,8 +731,7 @@ struct pinmux *pinmux_get(struct device *dev, const char *name)
                        else if (map->ctrl_dev_name)
                                devname = map->ctrl_dev_name;
-                        pr_warning("could not find a pinctrl device for pinmux "
+                        pr_warning("could not find a pinctrl device for pinmux function %s, fishy, they shall all have one\n",
-                                   "function %s, fishy, they shall all have one\n",
                                   map->function);
                        pr_warning("given pinctrl device name: %s",
                                   devname ? devname : "UNDEFINED");
@@ -904,8 +889,11 @@ void pinmux_disable(struct pinmux *pmx)
 }
 EXPORT_SYMBOL_GPL(pinmux_disable);
-int pinmux_check_ops(const struct pinmux_ops *ops)
+int pinmux_check_ops(struct pinctrl_dev *pctldev)
 {
+        const struct pinmux_ops *ops = pctldev->desc->pmxops;
+        unsigned selector = 0;
        /* Check that we implement required operations */
        if (!ops->list_functions ||
            !ops->get_function_name ||
@@ -914,6 +902,18 @@ int pinmux_check_ops(const struct pinmux_ops *ops)
            !ops->disable)
                return -EINVAL;
+        /* Check that all functions registered have names */
+        while (ops->list_functions(pctldev, selector) >= 0) {
+                const char *fname = ops->get_function_name(pctldev,
+                                                           selector);
+                if (!fname) {
+                        pr_err("pinmux ops has no name for function%u\n",
+                                selector);
+                        return -EINVAL;
+                }
+                selector++;
+        }
        return 0;
 }
@@ -932,8 +932,8 @@ static int pinmux_hog_map(struct pinctrl_dev *pctldev,
                 * without any problems, so then we can hog pinmuxes for
                 * all devices that just want a static pin mux at this point.
                 */
-                dev_err(pctldev->dev, "map %s wants to hog a non-system "
+                dev_err(pctldev->dev, "map %s wants to hog a non-system pinmux, this is not going to work\n",
-                        "pinmux, this is not going to work\n", map->name);
+                                map->name);
                return -EINVAL;
        }
@@ -993,9 +993,12 @@ int pinmux_hog_maps(struct pinctrl_dev *pctldev)
        for (i = 0; i < pinmux_maps_num; i++) {
                struct pinmux_map const *map = &pinmux_maps[i];
-                if (((map->ctrl_dev == dev) ||
+                if (!map->hog_on_boot)
-                     !strcmp(map->ctrl_dev_name, devname)) &&
+                        continue;
-                    map->hog_on_boot) {
+                if ((map->ctrl_dev == dev) ||
+                        (map->ctrl_dev_name &&
+                                !strcmp(map->ctrl_dev_name, devname))) {
                        /* OK time to hog! */
                        ret = pinmux_hog_map(pctldev, map);
                        if (ret)
@@ -1122,13 +1125,15 @@ static int pinmux_show(struct seq_file *s, void *what)
                seq_printf(s, "device: %s function: %s (%u),",
                           pinctrl_dev_get_name(pmx->pctldev),
-                           pmxops->get_function_name(pctldev, pmx->func_selector),
+                           pmxops->get_function_name(pctldev,
+                                   pmx->func_selector),
                           pmx->func_selector);
                seq_printf(s, " groups: [");
                list_for_each_entry(grp, &pmx->groups, node) {
                        seq_printf(s, " %s (%u)",
-                                   pctlops->get_group_name(pctldev, grp->group_selector),
+                                   pctlops->get_group_name(pctldev,
+                                           grp->group_selector),
                                   grp->group_selector);
                }
                seq_printf(s, " ]");
diff --git a/drivers/pinctrl/pinmux.h b/drivers/pinctrl/pinmux.h
index 844500b3331b..97f52223fbc2 100644
--- a/drivers/pinctrl/pinmux.h
+++ b/drivers/pinctrl/pinmux.h
@@ -12,7 +12,7 @@
 */
 #ifdef CONFIG_PINMUX
-int pinmux_check_ops(const struct pinmux_ops *ops);
+int pinmux_check_ops(struct pinctrl_dev *pctldev);
 void pinmux_init_device_debugfs(struct dentry *devroot,
                                struct pinctrl_dev *pctldev);
 void pinmux_init_debugfs(struct dentry *subsys_root);
@@ -21,7 +21,7 @@ void pinmux_unhog_maps(struct pinctrl_dev *pctldev);
 #else
-static inline int pinmux_check_ops(const struct pinmux_ops *ops)
+static inline int pinmux_check_ops(struct pinctrl_dev *pctldev)
 {
        return 0;
 }
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index f1651eb69648..679734d26a16 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -35,7 +35,7 @@ static void of_get_regulation_constraints(struct device_node *np,
        if (constraints->min_uV != constraints->max_uV)
                constraints->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE;
        /* Only one voltage?  Then make sure it's set. */
-        if (constraints->min_uV == constraints->max_uV)
+        if (min_uV && max_uV && constraints->min_uV == constraints->max_uV)
                constraints->apply_uV = true;
        uV_offset = of_get_property(np, "regulator-microvolt-offset", NULL);
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index e19a4031f45e..3a125b835546 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -774,7 +774,7 @@ config RTC_DRV_EP93XX
 config RTC_DRV_SA1100
        tristate "SA11x0/PXA2xx"
-        depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP
+        depends on ARCH_SA1100 || ARCH_PXA
        help
          If you say Y here you will get access to the real time clock
          built into your SA11x0 or PXA2xx CPU.
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 4595d3e645a7..cb9a585312cc 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -27,42 +27,34 @@
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/string.h>
 #include <linux/pm.h>
-#include <linux/slab.h>
+#include <linux/bitops.h>
-#include <linux/clk.h>
-#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#ifdef CONFIG_ARCH_PXA
+#include <mach/regs-rtc.h>
+#endif
 #define RTC_DEF_DIVIDER         (32768 - 1)
 #define RTC_DEF_TRIM            0
-#define RTC_FREQ                1024
+static const unsigned long RTC_FREQ = 1024;
-#define RCNR            0x00    /* RTC Count Register */
+static struct rtc_time rtc_alarm;
-#define RTAR            0x04    /* RTC Alarm Register */
+static DEFINE_SPINLOCK(sa1100_rtc_lock);
-#define RTSR            0x08    /* RTC Status Register */
-#define RTTR            0x0c    /* RTC Timer Trim Register */
+static inline int rtc_periodic_alarm(struct rtc_time *tm)
+{
-#define RTSR_HZE        (1 << 3)        /* HZ interrupt enable */
+        return  (tm->tm_year == -1) ||
-#define RTSR_ALE        (1 << 2)        /* RTC alarm interrupt enable */
+                ((unsigned)tm->tm_mon >= 12) ||
-#define RTSR_HZ         (1 << 1)        /* HZ rising-edge detected */
+                ((unsigned)(tm->tm_mday - 1) >= 31) ||
-#define RTSR_AL         (1 << 0)        /* RTC alarm detected */
+                ((unsigned)tm->tm_hour > 23) ||
+                ((unsigned)tm->tm_min > 59) ||
-#define rtc_readl(sa1100_rtc, reg)      \
+                ((unsigned)tm->tm_sec > 59);
-        readl_relaxed((sa1100_rtc)->base + (reg))
+}
-#define rtc_writel(sa1100_rtc, reg, value)      \
-        writel_relaxed((value), (sa1100_rtc)->base + (reg))
-struct sa1100_rtc {
-        struct resource         *ress;
-        void __iomem            *base;
-        struct clk              *clk;
-        int                     irq_1Hz;
-        int                     irq_Alrm;
-        struct rtc_device       *rtc;
-        spinlock_t              lock;           /* Protects this structure */
-};
 /*
 * Calculate the next alarm time given the requested alarm time mask
 * and the current time.
@@ -90,26 +82,46 @@ static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
        }
 }
+static int rtc_update_alarm(struct rtc_time *alrm)
+{
+        struct rtc_time alarm_tm, now_tm;
+        unsigned long now, time;
+        int ret;
+        do {
+                now = RCNR;
+                rtc_time_to_tm(now, &now_tm);
+                rtc_next_alarm_time(&alarm_tm, &now_tm, alrm);
+                ret = rtc_tm_to_time(&alarm_tm, &time);
+                if (ret != 0)
+                        break;
+                RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
+                RTAR = time;
+        } while (now != RCNR);
+        return ret;
+}
 static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
 {
        struct platform_device *pdev = to_platform_device(dev_id);
-        struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev);
+        struct rtc_device *rtc = platform_get_drvdata(pdev);
        unsigned int rtsr;
        unsigned long events = 0;
-        spin_lock(&sa1100_rtc->lock);
+        spin_lock(&sa1100_rtc_lock);
+        rtsr = RTSR;
        /* clear interrupt sources */
-        rtsr = rtc_readl(sa1100_rtc, RTSR);
+        RTSR = 0;
-        rtc_writel(sa1100_rtc, RTSR, 0);
        /* Fix for a nasty initialization problem the in SA11xx RTSR register.
         * See also the comments in sa1100_rtc_probe(). */
        if (rtsr & (RTSR_ALE | RTSR_HZE)) {
                /* This is the original code, before there was the if test
                 * above. This code does not clear interrupts that were not
                 * enabled. */
-                rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ) & (rtsr >> 2));
+                RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
        } else {
                /* For some reason, it is possible to enter this routine
                 * without interruptions enabled, it has been tested with
@@ -118,13 +130,13 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
                 * This situation leads to an infinite "loop" of interrupt
                 * routine calling and as a result the processor seems to
                 * lock on its first call to open(). */
-                rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ));
+                RTSR = RTSR_AL | RTSR_HZ;
        }
        /* clear alarm interrupt if it has occurred */
        if (rtsr & RTSR_AL)
                rtsr &= ~RTSR_ALE;
-        rtc_writel(sa1100_rtc, RTSR, rtsr & (RTSR_ALE | RTSR_HZE));
+        RTSR = rtsr & (RTSR_ALE | RTSR_HZE);
        /* update irq data & counter */
        if (rtsr & RTSR_AL)
@@ -132,100 +144,89 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
        if (rtsr & RTSR_HZ)
                events |= RTC_UF | RTC_IRQF;
-        rtc_update_irq(sa1100_rtc->rtc, 1, events);
+        rtc_update_irq(rtc, 1, events);
-        spin_unlock(&sa1100_rtc->lock);
+        if (rtsr & RTSR_AL && rtc_periodic_alarm(&rtc_alarm))
+                rtc_update_alarm(&rtc_alarm);
+        spin_unlock(&sa1100_rtc_lock);
        return IRQ_HANDLED;
 }
 static int sa1100_rtc_open(struct device *dev)
 {
-        struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
        int ret;
+        struct platform_device *plat_dev = to_platform_device(dev);
+        struct rtc_device *rtc = platform_get_drvdata(plat_dev);
-        ret = request_irq(sa1100_rtc->irq_1Hz, sa1100_rtc_interrupt,
+        ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED,
-                                IRQF_DISABLED, "rtc 1Hz", dev);
+                "rtc 1Hz", dev);
        if (ret) {
-                dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_1Hz);
+                dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz);
                goto fail_ui;
        }
-        ret = request_irq(sa1100_rtc->irq_Alrm, sa1100_rtc_interrupt,
+        ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED,
-                                IRQF_DISABLED, "rtc Alrm", dev);
+                "rtc Alrm", dev);
        if (ret) {
-                dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_Alrm);
+                dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm);
                goto fail_ai;
        }
-        sa1100_rtc->rtc->max_user_freq = RTC_FREQ;
+        rtc->max_user_freq = RTC_FREQ;
-        rtc_irq_set_freq(sa1100_rtc->rtc, NULL, RTC_FREQ);
+        rtc_irq_set_freq(rtc, NULL, RTC_FREQ);
        return 0;
 fail_ai:
-        free_irq(sa1100_rtc->irq_1Hz, dev);
+        free_irq(IRQ_RTC1Hz, dev);
 fail_ui:
        return ret;
 }
 static void sa1100_rtc_release(struct device *dev)
 {
-        struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+        spin_lock_irq(&sa1100_rtc_lock);
+        RTSR = 0;
-        spin_lock_irq(&sa1100_rtc->lock);
+        spin_unlock_irq(&sa1100_rtc_lock);
-        rtc_writel(sa1100_rtc, RTSR, 0);
-        spin_unlock_irq(&sa1100_rtc->lock);
-        free_irq(sa1100_rtc->irq_Alrm, dev);
+        free_irq(IRQ_RTCAlrm, dev);
-        free_irq(sa1100_rtc->irq_1Hz, dev);
+        free_irq(IRQ_RTC1Hz, dev);
 }
 static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
 {
-        struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+        spin_lock_irq(&sa1100_rtc_lock);
-        unsigned int rtsr;
-        spin_lock_irq(&sa1100_rtc->lock);
-        rtsr = rtc_readl(sa1100_rtc, RTSR);
        if (enabled)
-                rtsr |= RTSR_ALE;
+                RTSR |= RTSR_ALE;
        else
-                rtsr &= ~RTSR_ALE;
+                RTSR &= ~RTSR_ALE;
-        rtc_writel(sa1100_rtc, RTSR, rtsr);
+        spin_unlock_irq(&sa1100_rtc_lock);
-        spin_unlock_irq(&sa1100_rtc->lock);
        return 0;
 }
 static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-        struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+        rtc_time_to_tm(RCNR, tm);
-        rtc_time_to_tm(rtc_readl(sa1100_rtc, RCNR), tm);
        return 0;
 }
 static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
-        struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
        unsigned long time;
        int ret;
        ret = rtc_tm_to_time(tm, &time);
        if (ret == 0)
-                rtc_writel(sa1100_rtc, RCNR, time);
+                RCNR = time;
        return ret;
 }
 static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
-        struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+        u32     rtsr;
-        unsigned long time;
-        unsigned int rtsr;
-        time = rtc_readl(sa1100_rtc, RCNR);
+        memcpy(&alrm->time, &rtc_alarm, sizeof(struct rtc_time));
-        rtc_time_to_tm(time, &alrm->time);
+        rtsr = RTSR;
-        rtsr = rtc_readl(sa1100_rtc, RTSR);
        alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
        alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
        return 0;
@@ -233,39 +234,26 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
-        struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+        int ret;
-        struct rtc_time now_tm, alarm_tm;
-        unsigned long time, alarm;
-        unsigned int rtsr;
-        spin_lock_irq(&sa1100_rtc->lock);
-        time = rtc_readl(sa1100_rtc, RCNR);
-        rtc_time_to_tm(time, &now_tm);
-        rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time);
-        rtc_tm_to_time(&alarm_tm, &alarm);
-        rtc_writel(sa1100_rtc, RTAR, alarm);
-        rtsr = rtc_readl(sa1100_rtc, RTSR);
-        if (alrm->enabled)
-                rtsr |= RTSR_ALE;
-        else
-                rtsr &= ~RTSR_ALE;
-        rtc_writel(sa1100_rtc, RTSR, rtsr);
-        spin_unlock_irq(&sa1100_rtc->lock);
+        spin_lock_irq(&sa1100_rtc_lock);
+        ret = rtc_update_alarm(&alrm->time);
+        if (ret == 0) {
+                if (alrm->enabled)
+                        RTSR |= RTSR_ALE;
+                else
+                        RTSR &= ~RTSR_ALE;
+        }
+        spin_unlock_irq(&sa1100_rtc_lock);
-        return 0;
+        return ret;
 }
 static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
 {
-        struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+        seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR);
+        seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR);
-        seq_printf(seq, "trim/divider\t\t: 0x%08x\n",
-                        rtc_readl(sa1100_rtc, RTTR));
-        seq_printf(seq, "RTSR\t\t\t: 0x%08x\n",
-                        rtc_readl(sa1100_rtc, RTSR));
        return 0;
 }
@@ -282,51 +270,7 @@ static const struct rtc_class_ops sa1100_rtc_ops = {
 static int sa1100_rtc_probe(struct platform_device *pdev)
 {
-        struct sa1100_rtc *sa1100_rtc;
+        struct rtc_device *rtc;
-        unsigned int rttr;
-        int ret;
-        sa1100_rtc = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL);
-        if (!sa1100_rtc)
-                return -ENOMEM;
-        spin_lock_init(&sa1100_rtc->lock);
-        platform_set_drvdata(pdev, sa1100_rtc);
-        ret = -ENXIO;
-        sa1100_rtc->ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        if (!sa1100_rtc->ress) {
-                dev_err(&pdev->dev, "No I/O memory resource defined\n");
-                goto err_ress;
-        }
-        sa1100_rtc->irq_1Hz = platform_get_irq(pdev, 0);
-        if (sa1100_rtc->irq_1Hz < 0) {
-                dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n");
-                goto err_ress;
-        }
-        sa1100_rtc->irq_Alrm = platform_get_irq(pdev, 1);
-        if (sa1100_rtc->irq_Alrm < 0) {
-                dev_err(&pdev->dev, "No alarm IRQ resource defined\n");
-                goto err_ress;
-        }
-        ret = -ENOMEM;
-        sa1100_rtc->base = ioremap(sa1100_rtc->ress->start,
-                                resource_size(sa1100_rtc->ress));
-        if (!sa1100_rtc->base) {
-                dev_err(&pdev->dev, "Unable to map pxa RTC I/O memory\n");
-                goto err_map;
-        }
-        sa1100_rtc->clk = clk_get(&pdev->dev, NULL);
-        if (IS_ERR(sa1100_rtc->clk)) {
-                dev_err(&pdev->dev, "failed to find rtc clock source\n");
-                ret = PTR_ERR(sa1100_rtc->clk);
-                goto err_clk;
-        }
-        clk_prepare(sa1100_rtc->clk);
-        clk_enable(sa1100_rtc->clk);
        /*
         * According to the manual we should be able to let RTTR be zero
@@ -335,24 +279,24 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
         * If the clock divider is uninitialized then reset it to the
         * default value to get the 1Hz clock.
         */
-        if (rtc_readl(sa1100_rtc, RTTR) == 0) {
+        if (RTTR == 0) {
-                rttr = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
+                RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
-                rtc_writel(sa1100_rtc, RTTR, rttr);
+                dev_warn(&pdev->dev, "warning: "
-                dev_warn(&pdev->dev, "warning: initializing default clock"
+                        "initializing default clock divider/trim value\n");
-                         " divider/trim value\n");
                /* The current RTC value probably doesn't make sense either */
-                rtc_writel(sa1100_rtc, RCNR, 0);
+                RCNR = 0;
        }
        device_init_wakeup(&pdev->dev, 1);
-        sa1100_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
+        rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
-                                                &sa1100_rtc_ops, THIS_MODULE);
+                THIS_MODULE);
-        if (IS_ERR(sa1100_rtc->rtc)) {
-                dev_err(&pdev->dev, "Failed to register RTC device -> %d\n",
+        if (IS_ERR(rtc))
-                        ret);
+                return PTR_ERR(rtc);
-                goto err_rtc_reg;
-        }
+        platform_set_drvdata(pdev, rtc);
        /* Fix for a nasty initialization problem the in SA11xx RTSR register.
         * See also the comments in sa1100_rtc_interrupt().
         *
@@ -375,46 +319,33 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
         *
         * Notice that clearing bit 1 and 0 is accomplished by writting ONES to
         * the corresponding bits in RTSR. */
-        rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ));
+        RTSR = RTSR_AL | RTSR_HZ;
        return 0;
-err_rtc_reg:
-err_clk:
-        iounmap(sa1100_rtc->base);
-err_ress:
-err_map:
-        kfree(sa1100_rtc);
-        return ret;
 }
 static int sa1100_rtc_remove(struct platform_device *pdev)
 {
-        struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev);
+        struct rtc_device *rtc = platform_get_drvdata(pdev);
+        if (rtc)
+                rtc_device_unregister(rtc);
-        rtc_device_unregister(sa1100_rtc->rtc);
-        clk_disable(sa1100_rtc->clk);
-        clk_unprepare(sa1100_rtc->clk);
-        iounmap(sa1100_rtc->base);
        return 0;
 }
 #ifdef CONFIG_PM
 static int sa1100_rtc_suspend(struct device *dev)
 {
-        struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
        if (device_may_wakeup(dev))
-                enable_irq_wake(sa1100_rtc->irq_Alrm);
+                enable_irq_wake(IRQ_RTCAlrm);
        return 0;
 }
 static int sa1100_rtc_resume(struct device *dev)
 {
-        struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
        if (device_may_wakeup(dev))
-                disable_irq_wake(sa1100_rtc->irq_Alrm);
+                disable_irq_wake(IRQ_RTCAlrm);
        return 0;
 }
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index eef27a197c00..110137e7ec81 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -3261,6 +3261,12 @@ void dasd_generic_path_event(struct ccw_device *cdev, int *path_event)
                        device->path_data.tbvpm |= eventlpm;
                        dasd_schedule_device_bh(device);
                }
+                if (path_event[chp] & PE_PATHGROUP_ESTABLISHED) {
+                        DBF_DEV_EVENT(DBF_WARNING, device, "%s",
+                                      "Pathgroup re-established\n");
+                        if (device->discipline->kick_validate)
+                                device->discipline->kick_validate(device);
+                }
        }
        dasd_put_device(device);
 }
diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c
index 553b3c5abb0a..b3beed5434e4 100644
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -189,14 +189,12 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device)
        unsigned long flags;
        struct alias_server *server, *newserver;
        struct alias_lcu *lcu, *newlcu;
-        int is_lcu_known;
        struct dasd_uid uid;
        private = (struct dasd_eckd_private *) device->private;
        device->discipline->get_uid(device, &uid);
        spin_lock_irqsave(&aliastree.lock, flags);
-        is_lcu_known = 1;
        server = _find_server(&uid);
        if (!server) {
                spin_unlock_irqrestore(&aliastree.lock, flags);
@@ -208,7 +206,6 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device)
                if (!server) {
                        list_add(&newserver->server, &aliastree.serverlist);
                        server = newserver;
-                        is_lcu_known = 0;
                } else {
                        /* someone was faster */
                        _free_server(newserver);
@@ -226,12 +223,10 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device)
                if (!lcu) {
                        list_add(&newlcu->lcu, &server->lculist);
                        lcu = newlcu;
-                        is_lcu_known = 0;
                } else {
                        /* someone was faster */
                        _free_lcu(newlcu);
                }
-                is_lcu_known = 0;
        }
        spin_lock(&lcu->lock);
        list_add(&device->alias_list, &lcu->inactive_devices);
@@ -239,64 +234,7 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device)
        spin_unlock(&lcu->lock);
        spin_unlock_irqrestore(&aliastree.lock, flags);
-        return is_lcu_known;
+        return 0;
-}
-/*
- * The first device to be registered on an LCU will have to do
- * some additional setup steps to configure that LCU on the
- * storage server. All further devices should wait with their
- * initialization until the first device is done.
- * To synchronize this work, the first device will call
- * dasd_alias_lcu_setup_complete when it is done, and all
- * other devices will wait for it with dasd_alias_wait_for_lcu_setup.
- */
-void dasd_alias_lcu_setup_complete(struct dasd_device *device)
-{
-        unsigned long flags;
-        struct alias_server *server;
-        struct alias_lcu *lcu;
-        struct dasd_uid uid;
-        device->discipline->get_uid(device, &uid);
-        lcu = NULL;
-        spin_lock_irqsave(&aliastree.lock, flags);
-        server = _find_server(&uid);
-        if (server)
-                lcu = _find_lcu(server, &uid);
-        spin_unlock_irqrestore(&aliastree.lock, flags);
-        if (!lcu) {
-                DBF_EVENT_DEVID(DBF_ERR, device->cdev,
-                                "could not find lcu for %04x %02x",
-                                uid.ssid, uid.real_unit_addr);
-                WARN_ON(1);
-                return;
-        }
-        complete_all(&lcu->lcu_setup);
-}
-void dasd_alias_wait_for_lcu_setup(struct dasd_device *device)
-{
-        unsigned long flags;
-        struct alias_server *server;
-        struct alias_lcu *lcu;
-        struct dasd_uid uid;
-        device->discipline->get_uid(device, &uid);
-        lcu = NULL;
-        spin_lock_irqsave(&aliastree.lock, flags);
-        server = _find_server(&uid);
-        if (server)
-                lcu = _find_lcu(server, &uid);
-        spin_unlock_irqrestore(&aliastree.lock, flags);
-        if (!lcu) {
-                DBF_EVENT_DEVID(DBF_ERR, device->cdev,
-                                "could not find lcu for %04x %02x",
-                                uid.ssid, uid.real_unit_addr);
-                WARN_ON(1);
-                return;
-        }
-        wait_for_completion(&lcu->lcu_setup);
 }
 /*
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index bbcd5e9206ee..70880be26015 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -1534,6 +1534,10 @@ static void dasd_eckd_validate_server(struct dasd_device *device)
        struct dasd_eckd_private *private;
        int enable_pav;
+        private = (struct dasd_eckd_private *) device->private;
+        if (private->uid.type == UA_BASE_PAV_ALIAS ||
+            private->uid.type == UA_HYPER_PAV_ALIAS)
+                return;
        if (dasd_nopav || MACHINE_IS_VM)
                enable_pav = 0;
        else
@@ -1542,11 +1546,28 @@ static void dasd_eckd_validate_server(struct dasd_device *device)
        /* may be requested feature is not available on server,
         * therefore just report error and go ahead */
-        private = (struct dasd_eckd_private *) device->private;
        DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "PSF-SSC for SSID %04x "
                        "returned rc=%d", private->uid.ssid, rc);
 }
+/*
+ * worker to do a validate server in case of a lost pathgroup
+ */
+static void dasd_eckd_do_validate_server(struct work_struct *work)
+{
+        struct dasd_device *device = container_of(work, struct dasd_device,
+                                                  kick_validate);
+        dasd_eckd_validate_server(device);
+        dasd_put_device(device);
+}
+static void dasd_eckd_kick_validate_server(struct dasd_device *device)
+{
+        dasd_get_device(device);
+        /* queue call to do_validate_server to the kernel event daemon. */
+        schedule_work(&device->kick_validate);
+}
 static u32 get_fcx_max_data(struct dasd_device *device)
 {
 #if defined(CONFIG_64BIT)
@@ -1588,10 +1609,13 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
        struct dasd_eckd_private *private;
        struct dasd_block *block;
        struct dasd_uid temp_uid;
-        int is_known, rc, i;
+        int rc, i;
        int readonly;
        unsigned long value;
+        /* setup work queue for validate server*/
+        INIT_WORK(&device->kick_validate, dasd_eckd_do_validate_server);
        if (!ccw_device_is_pathgroup(device->cdev)) {
                dev_warn(&device->cdev->dev,
                         "A channel path group could not be established\n");
@@ -1651,22 +1675,12 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
                block->base = device;
        }
-        /* register lcu with alias handling, enable PAV if this is a new lcu */
+        /* register lcu with alias handling, enable PAV */
-        is_known = dasd_alias_make_device_known_to_lcu(device);
+        rc = dasd_alias_make_device_known_to_lcu(device);
-        if (is_known < 0) {
+        if (rc)
-                rc = is_known;
                goto out_err2;
-        }
-        /*
+        dasd_eckd_validate_server(device);
-         * dasd_eckd_validate_server is done on the first device that
-         * is found for an LCU. All later other devices have to wait
-         * for it, so they will read the correct feature codes.
-         */
-        if (!is_known) {
-                dasd_eckd_validate_server(device);
-                dasd_alias_lcu_setup_complete(device);
-        } else
-                dasd_alias_wait_for_lcu_setup(device);
        /* device may report different configuration data after LCU setup */
        rc = dasd_eckd_read_conf(device);
@@ -4098,7 +4112,7 @@ static int dasd_eckd_restore_device(struct dasd_device *device)
 {
        struct dasd_eckd_private *private;
        struct dasd_eckd_characteristics temp_rdc_data;
-        int is_known, rc;
+        int rc;
        struct dasd_uid temp_uid;
        unsigned long flags;
@@ -4121,14 +4135,10 @@ static int dasd_eckd_restore_device(struct dasd_device *device)
                goto out_err;
        /* register lcu with alias handling, enable PAV if this is a new lcu */
-        is_known = dasd_alias_make_device_known_to_lcu(device);
+        rc = dasd_alias_make_device_known_to_lcu(device);
-        if (is_known < 0)
+        if (rc)
-                return is_known;
+                return rc;
-        if (!is_known) {
+        dasd_eckd_validate_server(device);
-                dasd_eckd_validate_server(device);
-                dasd_alias_lcu_setup_complete(device);
-        } else
-                dasd_alias_wait_for_lcu_setup(device);
        /* RE-Read Configuration Data */
        rc = dasd_eckd_read_conf(device);
@@ -4270,6 +4280,7 @@ static struct dasd_discipline dasd_eckd_discipline = {
        .restore = dasd_eckd_restore_device,
        .reload = dasd_eckd_reload_device,
        .get_uid = dasd_eckd_get_uid,
+        .kick_validate = dasd_eckd_kick_validate_server,
 };
 static int __init
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index afe8c33422ed..33a6743ddc55 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -355,6 +355,7 @@ struct dasd_discipline {
        int (*reload) (struct dasd_device *);
        int (*get_uid) (struct dasd_device *, struct dasd_uid *);
+        void (*kick_validate) (struct dasd_device *);
 };
 extern struct dasd_discipline *dasd_diag_discipline_pointer;
@@ -455,6 +456,7 @@ struct dasd_device {
        struct work_struct kick_work;
        struct work_struct restore_device;
        struct work_struct reload_device;
+        struct work_struct kick_validate;
        struct timer_list timer;
        debug_info_t *debug_area;
diff --git a/drivers/staging/media/go7007/go7007-usb.c b/drivers/staging/media/go7007/go7007-usb.c
index 70e006b50f29..5443e25086e9 100644
--- a/drivers/staging/media/go7007/go7007-usb.c
+++ b/drivers/staging/media/go7007/go7007-usb.c
@@ -1279,3 +1279,4 @@ static struct usb_driver go7007_usb_driver = {
 };
 module_usb_driver(go7007_usb_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250/8250.c
index 9f50c4e3c2be..9f50c4e3c2be 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250/8250.c
diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250/8250.h
index ae027be57e25..ae027be57e25 100644
--- a/drivers/tty/serial/8250.h
+++ b/drivers/tty/serial/8250/8250.h
diff --git a/drivers/tty/serial/8250_accent.c b/drivers/tty/serial/8250/8250_accent.c
index 34b51c651192..34b51c651192 100644
--- a/drivers/tty/serial/8250_accent.c
+++ b/drivers/tty/serial/8250/8250_accent.c
diff --git a/drivers/tty/serial/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
index b0ce8c56f1a4..b0ce8c56f1a4 100644
--- a/drivers/tty/serial/8250_acorn.c
+++ b/drivers/tty/serial/8250/8250_acorn.c
diff --git a/drivers/tty/serial/8250_boca.c b/drivers/tty/serial/8250/8250_boca.c
index d125dc107985..d125dc107985 100644
--- a/drivers/tty/serial/8250_boca.c
+++ b/drivers/tty/serial/8250/8250_boca.c
diff --git a/drivers/tty/serial/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index f574eef3075f..f574eef3075f 100644
--- a/drivers/tty/serial/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
diff --git a/drivers/tty/serial/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index eaafb98debed..eaafb98debed 100644
--- a/drivers/tty/serial/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
diff --git a/drivers/tty/serial/8250_exar_st16c554.c b/drivers/tty/serial/8250/8250_exar_st16c554.c
index bf53aabf9b5e..bf53aabf9b5e 100644
--- a/drivers/tty/serial/8250_exar_st16c554.c
+++ b/drivers/tty/serial/8250/8250_exar_st16c554.c
diff --git a/drivers/tty/serial/8250_fourport.c b/drivers/tty/serial/8250/8250_fourport.c
index be1582609626..be1582609626 100644
--- a/drivers/tty/serial/8250_fourport.c
+++ b/drivers/tty/serial/8250/8250_fourport.c
diff --git a/drivers/tty/serial/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index f4d3c47b88e8..f4d3c47b88e8 100644
--- a/drivers/tty/serial/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
diff --git a/drivers/tty/serial/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c
index d8c0ffbfa6e3..d8c0ffbfa6e3 100644
--- a/drivers/tty/serial/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
diff --git a/drivers/tty/serial/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
index c13438c93012..c13438c93012 100644
--- a/drivers/tty/serial/8250_hp300.c
+++ b/drivers/tty/serial/8250/8250_hp300.c
diff --git a/drivers/tty/serial/8250_hub6.c b/drivers/tty/serial/8250/8250_hub6.c
index a5c778e83de0..a5c778e83de0 100644
--- a/drivers/tty/serial/8250_hub6.c
+++ b/drivers/tty/serial/8250/8250_hub6.c
diff --git a/drivers/tty/serial/8250_mca.c b/drivers/tty/serial/8250/8250_mca.c
index d20abf04541e..d20abf04541e 100644
--- a/drivers/tty/serial/8250_mca.c
+++ b/drivers/tty/serial/8250/8250_mca.c
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index da2b0b0a183f..da2b0b0a183f 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
diff --git a/drivers/tty/serial/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index a2f236510ff1..a2f236510ff1 100644
--- a/drivers/tty/serial/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
new file mode 100644
index 000000000000..591f8018e7dd
--- /dev/null
+++ b/drivers/tty/serial/8250/Kconfig
@@ -0,0 +1,280 @@
+#
+# The 8250/16550 serial drivers.  You shouldn't be in this list unless
+# you somehow have an implicit or explicit dependency on SERIAL_8250.
+#
+config SERIAL_8250
+        tristate "8250/16550 and compatible serial support"
+        select SERIAL_CORE
+        ---help---
+          This selects whether you want to include the driver for the standard
+          serial ports.  The standard answer is Y.  People who might say N
+          here are those that are setting up dedicated Ethernet WWW/FTP
+          servers, or users that have one of the various bus mice instead of a
+          serial mouse and don't intend to use their machine's standard serial
+          port for anything.  (Note that the Cyclades and Stallion multi
+          serial port drivers do not need this driver built in for them to
+          work.)
+          To compile this driver as a module, choose M here: the
+          module will be called 8250.
+          [WARNING: Do not compile this driver as a module if you are using
+          non-standard serial ports, since the configuration information will
+          be lost when the driver is unloaded.  This limitation may be lifted
+          in the future.]
+          BTW1: If you have a mouseman serial mouse which is not recognized by
+          the X window system, try running gpm first.
+          BTW2: If you intend to use a software modem (also called Winmodem)
+          under Linux, forget it.  These modems are crippled and require
+          proprietary drivers which are only available under Windows.
+          Most people will say Y or M here, so that they can use serial mice,
+          modems and similar devices connecting to the standard serial ports.
+config SERIAL_8250_CONSOLE
+        bool "Console on 8250/16550 and compatible serial port"
+        depends on SERIAL_8250=y
+        select SERIAL_CORE_CONSOLE
+        ---help---
+          If you say Y here, it will be possible to use a serial port as the
+          system console (the system console is the device which receives all
+          kernel messages and warnings and which allows logins in single user
+          mode). This could be useful if some terminal or printer is connected
+          to that serial port.
+          Even if you say Y here, the currently visible virtual console
+          (/dev/tty0) will still be used as the system console by default, but
+          you can alter that using a kernel command line option such as
+          "console=ttyS1". (Try "man bootparam" or see the documentation of
+          your boot loader (grub or lilo or loadlin) about how to pass options
+          to the kernel at boot time.)
+          If you don't have a VGA card installed and you say Y here, the
+          kernel will automatically use the first serial line, /dev/ttyS0, as
+          system console.
+          You can set that using a kernel command line option such as
+          "console=uart8250,io,0x3f8,9600n8"
+          "console=uart8250,mmio,0xff5e0000,115200n8".
+          and it will switch to normal serial console when the corresponding
+          port is ready.
+          "earlycon=uart8250,io,0x3f8,9600n8"
+          "earlycon=uart8250,mmio,0xff5e0000,115200n8".
+          it will not only setup early console.
+          If unsure, say N.
+config FIX_EARLYCON_MEM
+        bool
+        depends on X86
+        default y
+config SERIAL_8250_GSC
+        tristate
+        depends on SERIAL_8250 && GSC
+        default SERIAL_8250
+config SERIAL_8250_PCI
+        tristate "8250/16550 PCI device support" if EXPERT
+        depends on SERIAL_8250 && PCI
+        default SERIAL_8250
+        help
+          This builds standard PCI serial support. You may be able to
+          disable this feature if you only need legacy serial support.
+          Saves about 9K.
+config SERIAL_8250_PNP
+        tristate "8250/16550 PNP device support" if EXPERT
+        depends on SERIAL_8250 && PNP
+        default SERIAL_8250
+        help
+          This builds standard PNP serial support. You may be able to
+          disable this feature if you only need legacy serial support.
+config SERIAL_8250_HP300
+        tristate
+        depends on SERIAL_8250 && HP300
+        default SERIAL_8250
+config SERIAL_8250_CS
+        tristate "8250/16550 PCMCIA device support"
+        depends on PCMCIA && SERIAL_8250
+        ---help---
+          Say Y here to enable support for 16-bit PCMCIA serial devices,
+          including serial port cards, modems, and the modem functions of
+          multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
+          credit-card size devices often used with laptops.)
+          To compile this driver as a module, choose M here: the
+          module will be called serial_cs.
+          If unsure, say N.
+config SERIAL_8250_NR_UARTS
+        int "Maximum number of 8250/16550 serial ports"
+        depends on SERIAL_8250
+        default "4"
+        help
+          Set this to the number of serial ports you want the driver
+          to support.  This includes any ports discovered via ACPI or
+          PCI enumeration and any ports that may be added at run-time
+          via hot-plug, or any ISA multi-port serial cards.
+config SERIAL_8250_RUNTIME_UARTS
+        int "Number of 8250/16550 serial ports to register at runtime"
+        depends on SERIAL_8250
+        range 0 SERIAL_8250_NR_UARTS
+        default "4"
+        help
+          Set this to the maximum number of serial ports you want
+          the kernel to register at boot time.  This can be overridden
+          with the module parameter "nr_uarts", or boot-time parameter
+          8250.nr_uarts
+config SERIAL_8250_EXTENDED
+        bool "Extended 8250/16550 serial driver options"
+        depends on SERIAL_8250
+        help
+          If you wish to use any non-standard features of the standard "dumb"
+          driver, say Y here. This includes HUB6 support, shared serial
+          interrupts, special multiport support, support for more than the
+          four COM 1/2/3/4 boards, etc.
+          Note that the answer to this question won't directly affect the
+          kernel: saying N will just cause the configurator to skip all
+          the questions about serial driver options. If unsure, say N.
+config SERIAL_8250_MANY_PORTS
+        bool "Support more than 4 legacy serial ports"
+        depends on SERIAL_8250_EXTENDED && !IA64
+        help
+          Say Y here if you have dumb serial boards other than the four
+          standard COM 1/2/3/4 ports. This may happen if you have an AST
+          FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
+          from <http://www.tldp.org/docs.html#howto>), or other custom
+          serial port hardware which acts similar to standard serial port
+          hardware. If you only use the standard COM 1/2/3/4 ports, you can
+          say N here to save some memory. You can also say Y if you have an
+          "intelligent" multiport card such as Cyclades, Digiboards, etc.
+#
+# Multi-port serial cards
+#
+config SERIAL_8250_FOURPORT
+        tristate "Support Fourport cards"
+        depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+        help
+          Say Y here if you have an AST FourPort serial board.
+          To compile this driver as a module, choose M here: the module
+          will be called 8250_fourport.
+config SERIAL_8250_ACCENT
+        tristate "Support Accent cards"
+        depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+        help
+          Say Y here if you have an Accent Async serial board.
+          To compile this driver as a module, choose M here: the module
+          will be called 8250_accent.
+config SERIAL_8250_BOCA
+        tristate "Support Boca cards"
+        depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+        help
+          Say Y here if you have a Boca serial board.  Please read the Boca
+          mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
+          To compile this driver as a module, choose M here: the module
+          will be called 8250_boca.
+config SERIAL_8250_EXAR_ST16C554
+        tristate "Support Exar ST16C554/554D Quad UART"
+        depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+        help
+          The Uplogix Envoy TU301 uses this Exar Quad UART.  If you are
+          tinkering with your Envoy TU301, or have a machine with this UART,
+          say Y here.
+          To compile this driver as a module, choose M here: the module
+          will be called 8250_exar_st16c554.
+config SERIAL_8250_HUB6
+        tristate "Support Hub6 cards"
+        depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+        help
+          Say Y here if you have a HUB6 serial board.
+          To compile this driver as a module, choose M here: the module
+          will be called 8250_hub6.
+#
+# Misc. options/drivers.
+#
+config SERIAL_8250_SHARE_IRQ
+        bool "Support for sharing serial interrupts"
+        depends on SERIAL_8250_EXTENDED
+        help
+          Some serial boards have hardware support which allows multiple dumb
+          serial ports on the same board to share a single IRQ. To enable
+          support for this in the serial driver, say Y here.
+config SERIAL_8250_DETECT_IRQ
+        bool "Autodetect IRQ on standard ports (unsafe)"
+        depends on SERIAL_8250_EXTENDED
+        help
+          Say Y here if you want the kernel to try to guess which IRQ
+          to use for your serial port.
+          This is considered unsafe; it is far better to configure the IRQ in
+          a boot script using the setserial command.
+          If unsure, say N.
+config SERIAL_8250_RSA
+        bool "Support RSA serial ports"
+        depends on SERIAL_8250_EXTENDED
+        help
+          ::: To be written :::
+config SERIAL_8250_MCA
+        tristate "Support 8250-type ports on MCA buses"
+        depends on SERIAL_8250 != n && MCA
+        help
+          Say Y here if you have a MCA serial ports.
+          To compile this driver as a module, choose M here: the module
+          will be called 8250_mca.
+config SERIAL_8250_ACORN
+        tristate "Acorn expansion card serial port support"
+        depends on ARCH_ACORN && SERIAL_8250
+        help
+          If you have an Atomwide Serial card or Serial Port card for an Acorn
+          system, say Y to this option.  The driver can handle 1, 2, or 3 port
+          cards.  If unsure, say N.
+config SERIAL_8250_RM9K
+        bool "Support for MIPS RM9xxx integrated serial port"
+        depends on SERIAL_8250 != n && SERIAL_RM9000
+        select SERIAL_8250_SHARE_IRQ
+        help
+          Selecting this option will add support for the integrated serial
+          port hardware found on MIPS RM9122 and similar processors.
+          If unsure, say N.
+config SERIAL_8250_FSL
+        bool
+        depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550
+        default PPC
+config SERIAL_8250_DW
+        tristate "Support for Synopsys DesignWare 8250 quirks"
+        depends on SERIAL_8250 && OF
+        help
+          Selecting this option will enable handling of the extra features
+          present in the Synopsys DesignWare APB UART.
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
new file mode 100644
index 000000000000..867bba738908
--- /dev/null
+++ b/drivers/tty/serial/8250/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for the 8250 serial device drivers.
+#
+obj-$(CONFIG_SERIAL_8250)               += 8250.o
+obj-$(CONFIG_SERIAL_8250_PNP)           += 8250_pnp.o
+obj-$(CONFIG_SERIAL_8250_GSC)           += 8250_gsc.o
+obj-$(CONFIG_SERIAL_8250_PCI)           += 8250_pci.o
+obj-$(CONFIG_SERIAL_8250_HP300)         += 8250_hp300.o
+obj-$(CONFIG_SERIAL_8250_CS)            += serial_cs.o
+obj-$(CONFIG_SERIAL_8250_ACORN)         += 8250_acorn.o
+obj-$(CONFIG_SERIAL_8250_CONSOLE)       += 8250_early.o
+obj-$(CONFIG_SERIAL_8250_FOURPORT)      += 8250_fourport.o
+obj-$(CONFIG_SERIAL_8250_ACCENT)        += 8250_accent.o
+obj-$(CONFIG_SERIAL_8250_BOCA)          += 8250_boca.o
+obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
+obj-$(CONFIG_SERIAL_8250_HUB6)          += 8250_hub6.o
+obj-$(CONFIG_SERIAL_8250_MCA)           += 8250_mca.o
+obj-$(CONFIG_SERIAL_8250_FSL)           += 8250_fsl.o
+obj-$(CONFIG_SERIAL_8250_DW)            += 8250_dw.o
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/8250/m32r_sio.c
index 94a6792bf97b..94a6792bf97b 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/8250/m32r_sio.c
diff --git a/drivers/tty/serial/m32r_sio.h b/drivers/tty/serial/8250/m32r_sio.h
index e9b7e11793b1..e9b7e11793b1 100644
--- a/drivers/tty/serial/m32r_sio.h
+++ b/drivers/tty/serial/8250/m32r_sio.h
diff --git a/drivers/tty/serial/m32r_sio_reg.h b/drivers/tty/serial/8250/m32r_sio_reg.h
index 4671473793e3..4671473793e3 100644
--- a/drivers/tty/serial/m32r_sio_reg.h
+++ b/drivers/tty/serial/8250/m32r_sio_reg.h
diff --git a/drivers/tty/serial/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 86090605a84e..86090605a84e 100644
--- a/drivers/tty/serial/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index aca2386c5ef1..2de99248dfae 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -5,279 +5,7 @@
 menu "Serial drivers"
        depends on HAS_IOMEM
-#
+source "drivers/tty/serial/8250/Kconfig"
-# The new 8250/16550 serial drivers
-config SERIAL_8250
-        tristate "8250/16550 and compatible serial support"
-        select SERIAL_CORE
-        ---help---
-          This selects whether you want to include the driver for the standard
-          serial ports.  The standard answer is Y.  People who might say N
-          here are those that are setting up dedicated Ethernet WWW/FTP
-          servers, or users that have one of the various bus mice instead of a
-          serial mouse and don't intend to use their machine's standard serial
-          port for anything.  (Note that the Cyclades and Stallion multi
-          serial port drivers do not need this driver built in for them to
-          work.)
-          To compile this driver as a module, choose M here: the
-          module will be called 8250.
-          [WARNING: Do not compile this driver as a module if you are using
-          non-standard serial ports, since the configuration information will
-          be lost when the driver is unloaded.  This limitation may be lifted
-          in the future.]
-          BTW1: If you have a mouseman serial mouse which is not recognized by
-          the X window system, try running gpm first.
-          BTW2: If you intend to use a software modem (also called Winmodem)
-          under Linux, forget it.  These modems are crippled and require
-          proprietary drivers which are only available under Windows.
-          Most people will say Y or M here, so that they can use serial mice,
-          modems and similar devices connecting to the standard serial ports.
-config SERIAL_8250_CONSOLE
-        bool "Console on 8250/16550 and compatible serial port"
-        depends on SERIAL_8250=y
-        select SERIAL_CORE_CONSOLE
-        ---help---
-          If you say Y here, it will be possible to use a serial port as the
-          system console (the system console is the device which receives all
-          kernel messages and warnings and which allows logins in single user
-          mode). This could be useful if some terminal or printer is connected
-          to that serial port.
-          Even if you say Y here, the currently visible virtual console
-          (/dev/tty0) will still be used as the system console by default, but
-          you can alter that using a kernel command line option such as
-          "console=ttyS1". (Try "man bootparam" or see the documentation of
-          your boot loader (grub or lilo or loadlin) about how to pass options
-          to the kernel at boot time.)
-          If you don't have a VGA card installed and you say Y here, the
-          kernel will automatically use the first serial line, /dev/ttyS0, as
-          system console.
-          You can set that using a kernel command line option such as
-          "console=uart8250,io,0x3f8,9600n8"
-          "console=uart8250,mmio,0xff5e0000,115200n8".
-          and it will switch to normal serial console when the corresponding 
-          port is ready.
-          "earlycon=uart8250,io,0x3f8,9600n8"
-          "earlycon=uart8250,mmio,0xff5e0000,115200n8".
-          it will not only setup early console.
-          If unsure, say N.
-config FIX_EARLYCON_MEM
-        bool
-        depends on X86
-        default y
-config SERIAL_8250_GSC
-        tristate
-        depends on SERIAL_8250 && GSC
-        default SERIAL_8250
-config SERIAL_8250_PCI
-        tristate "8250/16550 PCI device support" if EXPERT
-        depends on SERIAL_8250 && PCI
-        default SERIAL_8250
-        help
-          This builds standard PCI serial support. You may be able to
-          disable this feature if you only need legacy serial support.
-          Saves about 9K.
-config SERIAL_8250_PNP
-        tristate "8250/16550 PNP device support" if EXPERT
-        depends on SERIAL_8250 && PNP
-        default SERIAL_8250
-        help
-          This builds standard PNP serial support. You may be able to
-          disable this feature if you only need legacy serial support.
-config SERIAL_8250_FSL
-        bool
-        depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550
-        default PPC
-config SERIAL_8250_HP300
-        tristate
-        depends on SERIAL_8250 && HP300
-        default SERIAL_8250
-config SERIAL_8250_CS
-        tristate "8250/16550 PCMCIA device support"
-        depends on PCMCIA && SERIAL_8250
-        ---help---
-          Say Y here to enable support for 16-bit PCMCIA serial devices,
-          including serial port cards, modems, and the modem functions of
-          multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
-          credit-card size devices often used with laptops.)
-          To compile this driver as a module, choose M here: the
-          module will be called serial_cs.
-          If unsure, say N.
-config SERIAL_8250_NR_UARTS
-        int "Maximum number of 8250/16550 serial ports"
-        depends on SERIAL_8250
-        default "4"
-        help
-          Set this to the number of serial ports you want the driver
-          to support.  This includes any ports discovered via ACPI or
-          PCI enumeration and any ports that may be added at run-time
-          via hot-plug, or any ISA multi-port serial cards.
-config SERIAL_8250_RUNTIME_UARTS
-        int "Number of 8250/16550 serial ports to register at runtime"
-        depends on SERIAL_8250
-        range 0 SERIAL_8250_NR_UARTS
-        default "4"
-        help
-          Set this to the maximum number of serial ports you want
-          the kernel to register at boot time.  This can be overridden
-          with the module parameter "nr_uarts", or boot-time parameter
-          8250.nr_uarts
-config SERIAL_8250_EXTENDED
-        bool "Extended 8250/16550 serial driver options"
-        depends on SERIAL_8250
-        help
-          If you wish to use any non-standard features of the standard "dumb"
-          driver, say Y here. This includes HUB6 support, shared serial
-          interrupts, special multiport support, support for more than the
-          four COM 1/2/3/4 boards, etc.
-          Note that the answer to this question won't directly affect the
-          kernel: saying N will just cause the configurator to skip all
-          the questions about serial driver options. If unsure, say N.
-config SERIAL_8250_MANY_PORTS
-        bool "Support more than 4 legacy serial ports"
-        depends on SERIAL_8250_EXTENDED && !IA64
-        help
-          Say Y here if you have dumb serial boards other than the four
-          standard COM 1/2/3/4 ports. This may happen if you have an AST
-          FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
-          from <http://www.tldp.org/docs.html#howto>), or other custom
-          serial port hardware which acts similar to standard serial port
-          hardware. If you only use the standard COM 1/2/3/4 ports, you can
-          say N here to save some memory. You can also say Y if you have an
-          "intelligent" multiport card such as Cyclades, Digiboards, etc.
-#
-# Multi-port serial cards
-#
-config SERIAL_8250_FOURPORT
-        tristate "Support Fourport cards"
-        depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-        help
-          Say Y here if you have an AST FourPort serial board.
-          To compile this driver as a module, choose M here: the module
-          will be called 8250_fourport.
-config SERIAL_8250_ACCENT
-        tristate "Support Accent cards"
-        depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-        help
-          Say Y here if you have an Accent Async serial board.
-          To compile this driver as a module, choose M here: the module
-          will be called 8250_accent.
-config SERIAL_8250_BOCA
-        tristate "Support Boca cards"
-        depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-        help
-          Say Y here if you have a Boca serial board.  Please read the Boca
-          mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
-          To compile this driver as a module, choose M here: the module
-          will be called 8250_boca.
-config SERIAL_8250_EXAR_ST16C554
-        tristate "Support Exar ST16C554/554D Quad UART"
-        depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-        help
-          The Uplogix Envoy TU301 uses this Exar Quad UART.  If you are
-          tinkering with your Envoy TU301, or have a machine with this UART,
-          say Y here.
-          To compile this driver as a module, choose M here: the module
-          will be called 8250_exar_st16c554.
-config SERIAL_8250_HUB6
-        tristate "Support Hub6 cards"
-        depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-        help
-          Say Y here if you have a HUB6 serial board.
-          To compile this driver as a module, choose M here: the module
-          will be called 8250_hub6.
-config SERIAL_8250_SHARE_IRQ
-        bool "Support for sharing serial interrupts"
-        depends on SERIAL_8250_EXTENDED
-        help
-          Some serial boards have hardware support which allows multiple dumb
-          serial ports on the same board to share a single IRQ. To enable
-          support for this in the serial driver, say Y here.
-config SERIAL_8250_DETECT_IRQ
-        bool "Autodetect IRQ on standard ports (unsafe)"
-        depends on SERIAL_8250_EXTENDED
-        help
-          Say Y here if you want the kernel to try to guess which IRQ
-          to use for your serial port.
-          This is considered unsafe; it is far better to configure the IRQ in
-          a boot script using the setserial command.
-          If unsure, say N.
-config SERIAL_8250_RSA
-        bool "Support RSA serial ports"
-        depends on SERIAL_8250_EXTENDED
-        help
-          ::: To be written :::
-config SERIAL_8250_MCA
-        tristate "Support 8250-type ports on MCA buses"
-        depends on SERIAL_8250 != n && MCA
-        help
-          Say Y here if you have a MCA serial ports.
-          To compile this driver as a module, choose M here: the module
-          will be called 8250_mca.
-config SERIAL_8250_ACORN
-        tristate "Acorn expansion card serial port support"
-        depends on ARCH_ACORN && SERIAL_8250
-        help
-          If you have an Atomwide Serial card or Serial Port card for an Acorn
-          system, say Y to this option.  The driver can handle 1, 2, or 3 port
-          cards.  If unsure, say N.
-config SERIAL_8250_RM9K
-        bool "Support for MIPS RM9xxx integrated serial port"
-        depends on SERIAL_8250 != n && SERIAL_RM9000
-        select SERIAL_8250_SHARE_IRQ
-        help
-          Selecting this option will add support for the integrated serial
-          port hardware found on MIPS RM9122 and similar processors.
-          If unsure, say N.
-config SERIAL_8250_DW
-        tristate "Support for Synopsys DesignWare 8250 quirks"
-        depends on SERIAL_8250 && OF
-        help
-          Selecting this option will enable handling of the extra features
-          present in the Synopsys DesignWare APB UART.
 comment "Non-8250 serial port support"
@@ -536,15 +264,6 @@ config SERIAL_MAX3107
        help
          MAX3107 chip support
-config SERIAL_MAX3107_AAVA
-        tristate "MAX3107 AAVA platform support"
-        depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB
-        select SERIAL_CORE
-        help
-          Support for the MAX3107 chip configuration found on the AAVA
-          platform. Includes the extra initialisation and GPIO support
-          neded for this device.
 config SERIAL_DZ
        bool "DECstation DZ serial driver"
        depends on MACH_DECSTATION && 32BIT
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index f5b01f2ce525..fef32e10c851 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -14,22 +14,9 @@ obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
 obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
 obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
-obj-$(CONFIG_SERIAL_8250) += 8250.o
+# Now bring in any enabled 8250/16450/16550 type drivers.
-obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
+obj-$(CONFIG_SERIAL_8250) += 8250/
-obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
-obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
-obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
-obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
-obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
-obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o
-obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o
-obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
-obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
-obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
-obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
-obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
-obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
-obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
 obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
 obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
 obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
@@ -42,7 +29,6 @@ obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
 obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
-obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
 obj-$(CONFIG_SERIAL_68328) += 68328serial.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 9ae024025ff3..6800f5f26241 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -159,6 +159,7 @@ struct uart_amba_port {
        unsigned int            fifosize;       /* vendor-specific */
        unsigned int            lcrh_tx;        /* vendor-specific */
        unsigned int            lcrh_rx;        /* vendor-specific */
+        unsigned int            old_cr;         /* state during shutdown */
        bool                    autorts;
        char                    type[12];
        bool                    interrupt_may_hang; /* vendor-specific */
@@ -1411,7 +1412,9 @@ static int pl011_startup(struct uart_port *port)
        while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
                barrier();
-        cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
+        /* restore RTS and DTR */
+        cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR);
+        cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
        writew(cr, uap->port.membase + UART011_CR);
        /* Clear pending error interrupts */
@@ -1469,6 +1472,7 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap,
 static void pl011_shutdown(struct uart_port *port)
 {
        struct uart_amba_port *uap = (struct uart_amba_port *)port;
+        unsigned int cr;
        /*
         * disable all interrupts
@@ -1488,9 +1492,16 @@ static void pl011_shutdown(struct uart_port *port)
        /*
         * disable the port
+         * disable the port. It should not disable RTS and DTR.
+         * Also RTS and DTR state should be preserved to restore
+         * it during startup().
         */
        uap->autorts = false;
-        writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR);
+        cr = readw(uap->port.membase + UART011_CR);
+        uap->old_cr = cr;
+        cr &= UART011_CR_RTS | UART011_CR_DTR;
+        cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
+        writew(cr, uap->port.membase + UART011_CR);
        /*
         * disable break condition and fifos
@@ -1740,9 +1751,19 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
 {
        struct uart_amba_port *uap = amba_ports[co->index];
        unsigned int status, old_cr, new_cr;
+        unsigned long flags;
+        int locked = 1;
        clk_enable(uap->clk);
+        local_irq_save(flags);
+        if (uap->port.sysrq)
+                locked = 0;
+        else if (oops_in_progress)
+                locked = spin_trylock(&uap->port.lock);
+        else
+                spin_lock(&uap->port.lock);
        /*
         *      First save the CR then disable the interrupts
         */
@@ -1762,6 +1783,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
        } while (status & UART01x_FR_BUSY);
        writew(old_cr, uap->port.membase + UART011_CR);
+        if (locked)
+                spin_unlock(&uap->port.lock);
+        local_irq_restore(flags);
        clk_disable(uap->clk);
 }
@@ -1905,6 +1930,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
        uap->vendor = vendor;
        uap->lcrh_rx = vendor->lcrh_rx;
        uap->lcrh_tx = vendor->lcrh_tx;
+        uap->old_cr = 0;
        uap->fifosize = vendor->fifosize;
        uap->interrupt_may_hang = vendor->interrupt_may_hang;
        uap->port.dev = &dev->dev;
diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c
index 7c867a046c97..7545fe1b9925 100644
--- a/drivers/tty/serial/jsm/jsm_driver.c
+++ b/drivers/tty/serial/jsm/jsm_driver.c
@@ -251,6 +251,7 @@ static void jsm_io_resume(struct pci_dev *pdev)
        struct jsm_board *brd = pci_get_drvdata(pdev);
        pci_restore_state(pdev);
+        pci_save_state(pdev);
        jsm_uart_port_init(brd);
 }
diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c
deleted file mode 100644
index aae772a71de6..000000000000
--- a/drivers/tty/serial/max3107-aava.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- *  max3107.c - spi uart protocol driver for Maxim 3107
- *  Based on max3100.c
- *      by Christian Pellegrin <chripell@evolware.org>
- *  and max3110.c
- *      by Feng Tang <feng.tang@intel.com>
- *
- *  Copyright (C) Aavamobile 2009
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- */
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/spi/spi.h>
-#include <linux/freezer.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/sfi.h>
-#include <linux/module.h>
-#include <asm/mrst.h>
-#include "max3107.h"
-/* GPIO direction to input function */
-static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
-{
-        struct max3107_port *s = container_of(chip, struct max3107_port, chip);
-        u16 buf[1];             /* Buffer for SPI transfer */
-        if (offset >= MAX3107_GPIO_COUNT) {
-                dev_err(&s->spi->dev, "Invalid GPIO\n");
-                return -EINVAL;
-        }
-        /* Read current GPIO configuration register */
-        buf[0] = MAX3107_GPIOCFG_REG;
-        /* Perform SPI transfer */
-        if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
-                dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n");
-                return -EIO;
-        }
-        buf[0] &= MAX3107_SPI_RX_DATA_MASK;
-        /* Set GPIO to input */
-        buf[0] &= ~(0x0001 << offset);
-        /* Write new GPIO configuration register value */
-        buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
-        /* Perform SPI transfer */
-        if (max3107_rw(s, (u8 *)buf, NULL, 2)) {
-                dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n");
-                return -EIO;
-        }
-        return 0;
-}
-/* GPIO direction to output function */
-static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
-                                        int value)
-{
-        struct max3107_port *s = container_of(chip, struct max3107_port, chip);
-        u16 buf[2];     /* Buffer for SPI transfers */
-        if (offset >= MAX3107_GPIO_COUNT) {
-                dev_err(&s->spi->dev, "Invalid GPIO\n");
-                return -EINVAL;
-        }
-        /* Read current GPIO configuration and data registers */
-        buf[0] = MAX3107_GPIOCFG_REG;
-        buf[1] = MAX3107_GPIODATA_REG;
-        /* Perform SPI transfer */
-        if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
-                dev_err(&s->spi->dev, "SPI transfer gpio failed\n");
-                return -EIO;
-        }
-        buf[0] &= MAX3107_SPI_RX_DATA_MASK;
-        buf[1] &= MAX3107_SPI_RX_DATA_MASK;
-        /* Set GPIO to output */
-        buf[0] |= (0x0001 << offset);
-        /* Set value */
-        if (value)
-                buf[1] |= (0x0001 << offset);
-        else
-                buf[1] &= ~(0x0001 << offset);
-        /* Write new GPIO configuration and data register values */
-        buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
-        buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
-        /* Perform SPI transfer */
-        if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
-                dev_err(&s->spi->dev,
-                        "SPI transfer for GPIO conf data w failed\n");
-                return -EIO;
-        }
-        return 0;
-}
-/* GPIO value query function */
-static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-        struct max3107_port *s = container_of(chip, struct max3107_port, chip);
-        u16 buf[1];     /* Buffer for SPI transfer */
-        if (offset >= MAX3107_GPIO_COUNT) {
-                dev_err(&s->spi->dev, "Invalid GPIO\n");
-                return -EINVAL;
-        }
-        /* Read current GPIO data register */
-        buf[0] = MAX3107_GPIODATA_REG;
-        /* Perform SPI transfer */
-        if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
-                dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n");
-                return -EIO;
-        }
-        buf[0] &= MAX3107_SPI_RX_DATA_MASK;
-        /* Return value */
-        return buf[0] & (0x0001 << offset);
-}
-/* GPIO value set function */
-static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-        struct max3107_port *s = container_of(chip, struct max3107_port, chip);
-        u16 buf[2];     /* Buffer for SPI transfers */
-        if (offset >= MAX3107_GPIO_COUNT) {
-                dev_err(&s->spi->dev, "Invalid GPIO\n");
-                return;
-        }
-        /* Read current GPIO configuration registers*/
-        buf[0] = MAX3107_GPIODATA_REG;
-        buf[1] = MAX3107_GPIOCFG_REG;
-        /* Perform SPI transfer */
-        if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
-                dev_err(&s->spi->dev,
-                        "SPI transfer for GPIO data and config read failed\n");
-                return;
-        }
-        buf[0] &= MAX3107_SPI_RX_DATA_MASK;
-        buf[1] &= MAX3107_SPI_RX_DATA_MASK;
-        if (!(buf[1] & (0x0001 << offset))) {
-                /* Configured as input, can't set value */
-                dev_warn(&s->spi->dev,
-                                "Trying to set value for input GPIO\n");
-                return;
-        }
-        /* Set value */
-        if (value)
-                buf[0] |= (0x0001 << offset);
-        else
-                buf[0] &= ~(0x0001 << offset);
-        /* Write new GPIO data register value */
-        buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
-        /* Perform SPI transfer */
-        if (max3107_rw(s, (u8 *)buf, NULL, 2))
-                dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n");
-}
-/* GPIO chip data */
-static struct gpio_chip max3107_gpio_chip = {
-        .owner                  = THIS_MODULE,
-        .direction_input        = max3107_gpio_direction_in,
-        .direction_output       = max3107_gpio_direction_out,
-        .get                    = max3107_gpio_get,
-        .set                    = max3107_gpio_set,
-        .can_sleep              = 1,
-        .base                   = MAX3107_GPIO_BASE,
-        .ngpio                  = MAX3107_GPIO_COUNT,
-};
-/**
- *      max3107_aava_reset      -       reset on AAVA systems
- *      @spi: The SPI device we are probing
- *
- *      Reset the device ready for probing.
- */
-static int max3107_aava_reset(struct spi_device *spi)
-{
-        /* Reset the chip */
-        if (gpio_request(MAX3107_RESET_GPIO, "max3107")) {
-                pr_err("Requesting RESET GPIO failed\n");
-                return -EIO;
-        }
-        if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) {
-                pr_err("Setting RESET GPIO to 0 failed\n");
-                gpio_free(MAX3107_RESET_GPIO);
-                return -EIO;
-        }
-        msleep(MAX3107_RESET_DELAY);
-        if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) {
-                pr_err("Setting RESET GPIO to 1 failed\n");
-                gpio_free(MAX3107_RESET_GPIO);
-                return -EIO;
-        }
-        gpio_free(MAX3107_RESET_GPIO);
-        msleep(MAX3107_WAKEUP_DELAY);
-        return 0;
-}
-static int max3107_aava_configure(struct max3107_port *s)
-{
-        int retval;
-        /* Initialize GPIO chip data */
-        s->chip = max3107_gpio_chip;
-        s->chip.label = s->spi->modalias;
-        s->chip.dev = &s->spi->dev;
-        /* Add GPIO chip */
-        retval = gpiochip_add(&s->chip);
-        if (retval) {
-                dev_err(&s->spi->dev, "Adding GPIO chip failed\n");
-                return retval;
-        }
-        /* Temporary fix for EV2 boot problems, set modem reset to 0 */
-        max3107_gpio_direction_out(&s->chip, 3, 0);
-        return 0;
-}
-#if 0
-/* This will get enabled once we have the board stuff merged for this
-   specific case */
-static const struct baud_table brg13_ext[] = {
-        { 300,    MAX3107_BRG13_B300 },
-        { 600,    MAX3107_BRG13_B600 },
-        { 1200,   MAX3107_BRG13_B1200 },
-        { 2400,   MAX3107_BRG13_B2400 },
-        { 4800,   MAX3107_BRG13_B4800 },
-        { 9600,   MAX3107_BRG13_B9600 },
-        { 19200,  MAX3107_BRG13_B19200 },
-        { 57600,  MAX3107_BRG13_B57600 },
-        { 115200, MAX3107_BRG13_B115200 },
-        { 230400, MAX3107_BRG13_B230400 },
-        { 460800, MAX3107_BRG13_B460800 },
-        { 921600, MAX3107_BRG13_B921600 },
-        { 0, 0 }
-};
-static void max3107_aava_init(struct max3107_port *s)
-{
-        /*override for AAVA SC specific*/
-        if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) {
-                if (get_koski_build_id() <= KOSKI_EV2)
-                        if (s->ext_clk) {
-                                s->brg_cfg = MAX3107_BRG13_B9600;
-                                s->baud_tbl = (struct baud_table *)brg13_ext;
-                        }
-        }
-}
-#endif
-static int __devexit max3107_aava_remove(struct spi_device *spi)
-{
-        struct max3107_port *s = dev_get_drvdata(&spi->dev);
-        /* Remove GPIO chip */
-        if (gpiochip_remove(&s->chip))
-                dev_warn(&spi->dev, "Removing GPIO chip failed\n");
-        /* Then do the default remove */
-        return max3107_remove(spi);
-}
-/* Platform data */
-static struct max3107_plat aava_plat_data = {
-        .loopback               = 0,
-        .ext_clk                = 1,
-/*      .init                   = max3107_aava_init, */
-        .configure              = max3107_aava_configure,
-        .hw_suspend             = max3107_hw_susp,
-        .polled_mode            = 0,
-        .poll_time              = 0,
-};
-static int __devinit max3107_probe_aava(struct spi_device *spi)
-{
-        int err = max3107_aava_reset(spi);
-        if (err < 0)
-                return err;
-        return max3107_probe(spi, &aava_plat_data);
-}
-/* Spi driver data */
-static struct spi_driver max3107_driver = {
-        .driver = {
-                .name           = "aava-max3107",
-                .owner          = THIS_MODULE,
-        },
-        .probe          = max3107_probe_aava,
-        .remove         = __devexit_p(max3107_aava_remove),
-        .suspend        = max3107_suspend,
-        .resume         = max3107_resume,
-};
-/* Driver init function */
-static int __init max3107_init(void)
-{
-        return spi_register_driver(&max3107_driver);
-}
-/* Driver exit function */
-static void __exit max3107_exit(void)
-{
-        spi_unregister_driver(&max3107_driver);
-}
-module_init(max3107_init);
-module_exit(max3107_exit);
-MODULE_DESCRIPTION("MAX3107 driver");
-MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("spi:aava-max3107");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d192dcbb82f5..1c2426931484 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1160,7 +1160,7 @@ static struct uart_driver serial_omap_reg = {
        .cons           = OMAP_CONSOLE,
 };
-#ifdef CONFIG_SUSPEND
+#ifdef CONFIG_PM_SLEEP
 static int serial_omap_suspend(struct device *dev)
 {
        struct uart_omap_port *up = dev_get_drvdata(dev);
@@ -1521,6 +1521,7 @@ static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1)
        }
 }
+#ifdef CONFIG_PM_RUNTIME
 static void serial_omap_restore_context(struct uart_omap_port *up)
 {
        if (up->errata & UART_ERRATA_i202_MDR1_ACCESS)
@@ -1550,7 +1551,6 @@ static void serial_omap_restore_context(struct uart_omap_port *up)
                serial_out(up, UART_OMAP_MDR1, up->mdr1);
 }
-#ifdef CONFIG_PM_RUNTIME
 static int serial_omap_runtime_suspend(struct device *dev)
 {
        struct uart_omap_port *up = dev_get_drvdata(dev);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index c7bf31a6a7e7..13056180adf5 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2348,11 +2348,11 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
         */
        tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev);
        if (likely(!IS_ERR(tty_dev))) {
-                device_init_wakeup(tty_dev, 1);
+                device_set_wakeup_capable(tty_dev, 1);
-                device_set_wakeup_enable(tty_dev, 0);
+        } else {
-        } else
                printk(KERN_ERR "Cannot register tty device on line %d\n",
                       uport->line);
+        }
        /*
         * Ensure UPF_DEAD is not set.
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index ef9dd628ba0b..bf6e238146ae 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -227,7 +227,6 @@ int tty_port_block_til_ready(struct tty_port *port,
        int do_clocal = 0, retval;
        unsigned long flags;
        DEFINE_WAIT(wait);
-        int cd;
        /* block if port is in the process of being closed */
        if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
@@ -284,11 +283,14 @@ int tty_port_block_til_ready(struct tty_port *port,
                                retval = -ERESTARTSYS;
                        break;
                }
-                /* Probe the carrier. For devices with no carrier detect this
+                /*
-                   will always return true */
+                 * Probe the carrier. For devices with no carrier detect
-                cd = tty_port_carrier_raised(port);
+                 * tty_port_carrier_raised will always return true.
+                 * Never ask drivers if CLOCAL is set, this causes troubles
+                 * on some hardware.
+                 */
                if (!(port->flags & ASYNC_CLOSING) &&
-                                (do_clocal || cd))
+                                (do_clocal || tty_port_carrier_raised(port)))
                        break;
                if (signal_pending(current)) {
                        retval = -ERESTARTSYS;
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 1c50baff7725..d2b3cffca3f7 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -57,6 +57,8 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
 #define WDM_MAX                 16
+/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */
+#define WDM_DEFAULT_BUFSIZE     256
 static DEFINE_MUTEX(wdm_mutex);
@@ -88,7 +90,8 @@ struct wdm_device {
        int                     count;
        dma_addr_t              shandle;
        dma_addr_t              ihandle;
-        struct mutex            lock;
+        struct mutex            wlock;
+        struct mutex            rlock;
        wait_queue_head_t       wait;
        struct work_struct      rxwork;
        int                     werr;
@@ -323,7 +326,7 @@ static ssize_t wdm_write
        }
        /* concurrent writes and disconnect */
-        r = mutex_lock_interruptible(&desc->lock);
+        r = mutex_lock_interruptible(&desc->wlock);
        rv = -ERESTARTSYS;
        if (r) {
                kfree(buf);
@@ -386,7 +389,7 @@ static ssize_t wdm_write
 out:
        usb_autopm_put_interface(desc->intf);
 outnp:
-        mutex_unlock(&desc->lock);
+        mutex_unlock(&desc->wlock);
 outnl:
        return rv < 0 ? rv : count;
 }
@@ -399,7 +402,7 @@ static ssize_t wdm_read
        struct wdm_device *desc = file->private_data;
-        rv = mutex_lock_interruptible(&desc->lock); /*concurrent reads */
+        rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */
        if (rv < 0)
                return -ERESTARTSYS;
@@ -467,14 +470,16 @@ retry:
        for (i = 0; i < desc->length - cntr; i++)
                desc->ubuf[i] = desc->ubuf[i + cntr];
+        spin_lock_irq(&desc->iuspin);
        desc->length -= cntr;
+        spin_unlock_irq(&desc->iuspin);
        /* in case we had outstanding data */
        if (!desc->length)
                clear_bit(WDM_READ, &desc->flags);
        rv = cntr;
 err:
-        mutex_unlock(&desc->lock);
+        mutex_unlock(&desc->rlock);
        return rv;
 }
@@ -540,7 +545,8 @@ static int wdm_open(struct inode *inode, struct file *file)
        }
        intf->needs_remote_wakeup = 1;
-        mutex_lock(&desc->lock);
+        /* using write lock to protect desc->count */
+        mutex_lock(&desc->wlock);
        if (!desc->count++) {
                desc->werr = 0;
                desc->rerr = 0;
@@ -553,7 +559,7 @@ static int wdm_open(struct inode *inode, struct file *file)
        } else {
                rv = 0;
        }
-        mutex_unlock(&desc->lock);
+        mutex_unlock(&desc->wlock);
        usb_autopm_put_interface(desc->intf);
 out:
        mutex_unlock(&wdm_mutex);
@@ -565,9 +571,11 @@ static int wdm_release(struct inode *inode, struct file *file)
        struct wdm_device *desc = file->private_data;
        mutex_lock(&wdm_mutex);
-        mutex_lock(&desc->lock);
+        /* using write lock to protect desc->count */
+        mutex_lock(&desc->wlock);
        desc->count--;
-        mutex_unlock(&desc->lock);
+        mutex_unlock(&desc->wlock);
        if (!desc->count) {
                dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
@@ -630,7 +638,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
        struct usb_cdc_dmm_desc *dmhd;
        u8 *buffer = intf->altsetting->extra;
        int buflen = intf->altsetting->extralen;
-        u16 maxcom = 0;
+        u16 maxcom = WDM_DEFAULT_BUFSIZE;
        if (!buffer)
                goto out;
@@ -665,7 +673,8 @@ next_desc:
        desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL);
        if (!desc)
                goto out;
-        mutex_init(&desc->lock);
+        mutex_init(&desc->rlock);
+        mutex_init(&desc->wlock);
        spin_lock_init(&desc->iuspin);
        init_waitqueue_head(&desc->wait);
        desc->wMaxCommand = maxcom;
@@ -716,7 +725,7 @@ next_desc:
                goto err;
        desc->inbuf = usb_alloc_coherent(interface_to_usbdev(intf),
-                                         desc->bMaxPacketSize0,
+                                         desc->wMaxCommand,
                                         GFP_KERNEL,
                                         &desc->response->transfer_dma);
        if (!desc->inbuf)
@@ -779,11 +788,13 @@ static void wdm_disconnect(struct usb_interface *intf)
        /* to terminate pending flushes */
        clear_bit(WDM_IN_USE, &desc->flags);
        spin_unlock_irqrestore(&desc->iuspin, flags);
-        mutex_lock(&desc->lock);
+        wake_up_all(&desc->wait);
+        mutex_lock(&desc->rlock);
+        mutex_lock(&desc->wlock);
        kill_urbs(desc);
        cancel_work_sync(&desc->rxwork);
-        mutex_unlock(&desc->lock);
+        mutex_unlock(&desc->wlock);
-        wake_up_all(&desc->wait);
+        mutex_unlock(&desc->rlock);
        if (!desc->count)
                cleanup(desc);
        mutex_unlock(&wdm_mutex);
@@ -798,8 +809,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message)
        dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor);
        /* if this is an autosuspend the caller does the locking */
-        if (!PMSG_IS_AUTO(message))
+        if (!PMSG_IS_AUTO(message)) {
-                mutex_lock(&desc->lock);
+                mutex_lock(&desc->rlock);
+                mutex_lock(&desc->wlock);
+        }
        spin_lock_irq(&desc->iuspin);
        if (PMSG_IS_AUTO(message) &&
@@ -815,8 +828,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message)
                kill_urbs(desc);
                cancel_work_sync(&desc->rxwork);
        }
-        if (!PMSG_IS_AUTO(message))
+        if (!PMSG_IS_AUTO(message)) {
-                mutex_unlock(&desc->lock);
+                mutex_unlock(&desc->wlock);
+                mutex_unlock(&desc->rlock);
+        }
        return rv;
 }
@@ -854,7 +869,8 @@ static int wdm_pre_reset(struct usb_interface *intf)
 {
        struct wdm_device *desc = usb_get_intfdata(intf);
-        mutex_lock(&desc->lock);
+        mutex_lock(&desc->rlock);
+        mutex_lock(&desc->wlock);
        kill_urbs(desc);
        /*
@@ -876,7 +892,8 @@ static int wdm_post_reset(struct usb_interface *intf)
        int rv;
        rv = recover_from_urb_loss(desc);
-        mutex_unlock(&desc->lock);
+        mutex_unlock(&desc->wlock);
+        mutex_unlock(&desc->rlock);
        return 0;
 }
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 2f51de57593a..c8df1dd967ef 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -126,7 +126,6 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
                struct dwc3_request *req)
 {
        struct dwc3             *dwc = dep->dwc;
-        u32                     type;
        int                     ret = 0;
        req->request.actual     = 0;
@@ -149,20 +148,14 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
                direction = !!(dep->flags & DWC3_EP0_DIR_IN);
-                if (dwc->ep0state == EP0_STATUS_PHASE) {
+                if (dwc->ep0state != EP0_DATA_PHASE) {
-                        type = dwc->three_stage_setup
+                        dev_WARN(dwc->dev, "Unexpected pending request\n");
-                                ? DWC3_TRBCTL_CONTROL_STATUS3
-                                : DWC3_TRBCTL_CONTROL_STATUS2;
-                } else if (dwc->ep0state == EP0_DATA_PHASE) {
-                        type = DWC3_TRBCTL_CONTROL_DATA;
-                } else {
-                        /* should never happen */
-                        WARN_ON(1);
                        return 0;
                }
                ret = dwc3_ep0_start_trans(dwc, direction,
-                                req->request.dma, req->request.length, type);
+                                req->request.dma, req->request.length,
+                                DWC3_TRBCTL_CONTROL_DATA);
                dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
                                DWC3_EP0_DIR_IN);
        } else if (dwc->delayed_status) {
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index a696bde53222..064b6e2cd411 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -101,7 +101,7 @@ void dwc3_unmap_buffer_from_dma(struct dwc3_request *req)
        if (req->request.num_mapped_sgs) {
                req->request.dma = DMA_ADDR_INVALID;
                dma_unmap_sg(dwc->dev, req->request.sg,
-                                req->request.num_sgs,
+                                req->request.num_mapped_sgs,
                                req->direction ? DMA_TO_DEVICE
                                : DMA_FROM_DEVICE);
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index a95de6a4a134..baaebf2830fc 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -175,13 +175,12 @@ ep_found:
        _ep->comp_desc = comp_desc;
        if (g->speed == USB_SPEED_SUPER) {
                switch (usb_endpoint_type(_ep->desc)) {
-                case USB_ENDPOINT_XFER_BULK:
-                case USB_ENDPOINT_XFER_INT:
-                        _ep->maxburst = comp_desc->bMaxBurst;
-                        break;
                case USB_ENDPOINT_XFER_ISOC:
                        /* mult: bits 1:0 of bmAttributes */
                        _ep->mult = comp_desc->bmAttributes & 0x3;
+                case USB_ENDPOINT_XFER_BULK:
+                case USB_ENDPOINT_XFER_INT:
+                        _ep->maxburst = comp_desc->bMaxBurst;
                        break;
                default:
                        /* Do nothing for control endpoints */
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 753aa0683ac1..e0e6375ef5dd 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -126,7 +126,7 @@ ep_matches (
         * descriptor and see if the EP matches it
         */
        if (usb_endpoint_xfer_bulk(desc)) {
-                if (ep_comp) {
+                if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) {
                        num_req_streams = ep_comp->bmAttributes & 0x1f;
                        if (num_req_streams > ep->max_streams)
                                return 0;
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 6353eca1e852..ee8ceec01560 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -3123,15 +3123,15 @@ fsg_add(struct usb_composite_dev *cdev, struct usb_configuration *c,
 struct fsg_module_parameters {
        char            *file[FSG_MAX_LUNS];
-        int             ro[FSG_MAX_LUNS];
+        bool            ro[FSG_MAX_LUNS];
-        int             removable[FSG_MAX_LUNS];
+        bool            removable[FSG_MAX_LUNS];
-        int             cdrom[FSG_MAX_LUNS];
+        bool            cdrom[FSG_MAX_LUNS];
-        int             nofua[FSG_MAX_LUNS];
+        bool            nofua[FSG_MAX_LUNS];
        unsigned int    file_count, ro_count, removable_count, cdrom_count;
        unsigned int    nofua_count;
        unsigned int    luns;   /* nluns */
-        int             stall;  /* can_stall */
+        bool            stall;  /* can_stall */
 };
 #define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc)       \
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index d7ea6c076ce9..b04712f19f1e 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1430,7 +1430,7 @@ static void setup_received_irq(struct fsl_udc *udc,
                        int pipe = get_pipe_by_windex(wIndex);
                        struct fsl_ep *ep;
-                        if (wValue != 0 || wLength != 0 || pipe > udc->max_ep)
+                        if (wValue != 0 || wLength != 0 || pipe >= udc->max_ep)
                                break;
                        ep = get_ep_by_pipe(udc, pipe);
@@ -1673,7 +1673,7 @@ static void dtd_complete_irq(struct fsl_udc *udc)
        if (!bit_pos)
                return;
-        for (i = 0; i < udc->max_ep * 2; i++) {
+        for (i = 0; i < udc->max_ep; i++) {
                ep_num = i >> 1;
                direction = i % 2;
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index fa0fcc11263f..e2293c1588ee 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -11,11 +11,6 @@
 /* #undef       DEBUG */
 /* #undef       VERBOSE_DEBUG */
-#if defined(CONFIG_USB_LANGWELL_OTG)
-#define OTG_TRANSCEIVER
-#endif
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -1522,8 +1517,7 @@ static void langwell_udc_stop(struct langwell_udc *dev)
 /* stop all USB activities */
-static void stop_activity(struct langwell_udc *dev,
+static void stop_activity(struct langwell_udc *dev)
-                struct usb_gadget_driver *driver)
 {
        struct langwell_ep      *ep;
        dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
@@ -1535,9 +1529,9 @@ static void stop_activity(struct langwell_udc *dev,
        }
        /* report disconnect; the driver is already quiesced */
-        if (driver) {
+        if (dev->driver) {
                spin_unlock(&dev->lock);
-                driver->disconnect(&dev->gadget);
+                dev->driver->disconnect(&dev->gadget);
                spin_lock(&dev->lock);
        }
@@ -1925,11 +1919,10 @@ static int langwell_stop(struct usb_gadget *g,
        /* stop all usb activities */
        dev->gadget.speed = USB_SPEED_UNKNOWN;
-        stop_activity(dev, driver);
-        spin_unlock_irqrestore(&dev->lock, flags);
        dev->gadget.dev.driver = NULL;
        dev->driver = NULL;
+        stop_activity(dev);
+        spin_unlock_irqrestore(&dev->lock, flags);
        device_remove_file(&dev->pdev->dev, &dev_attr_function);
@@ -2315,13 +2308,9 @@ static void handle_setup_packet(struct langwell_udc *dev,
                        if (!gadget_is_otg(&dev->gadget))
                                break;
-                        else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) {
+                        else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
                                dev->gadget.b_hnp_enable = 1;
-#ifdef  OTG_TRANSCEIVER
+                        else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
-                                if (!dev->lotg->otg.default_a)
-                                        dev->lotg->hsm.b_hnp_enable = 1;
-#endif
-                        } else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
                                dev->gadget.a_hnp_support = 1;
                        else if (setup->bRequest ==
                                        USB_DEVICE_A_ALT_HNP_SUPPORT)
@@ -2733,7 +2722,7 @@ static void handle_usb_reset(struct langwell_udc *dev)
                dev->bus_reset = 1;
                /* reset all the queues, stop all USB activities */
-                stop_activity(dev, dev->driver);
+                stop_activity(dev);
                dev->usb_state = USB_STATE_DEFAULT;
        } else {
                dev_vdbg(&dev->pdev->dev, "device controller reset\n");
@@ -2741,7 +2730,7 @@ static void handle_usb_reset(struct langwell_udc *dev)
                langwell_udc_reset(dev);
                /* reset all the queues, stop all USB activities */
-                stop_activity(dev, dev->driver);
+                stop_activity(dev);
                /* reset ep0 dQH and endptctrl */
                ep0_reset(dev);
@@ -2752,12 +2741,6 @@ static void handle_usb_reset(struct langwell_udc *dev)
                dev->usb_state = USB_STATE_ATTACHED;
        }
-#ifdef  OTG_TRANSCEIVER
-        /* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */
-        if (!dev->lotg->otg.default_a)
-                dev->lotg->hsm.b_hnp_enable = 0;
-#endif
        dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
 }
@@ -2770,29 +2753,6 @@ static void handle_bus_suspend(struct langwell_udc *dev)
        dev->resume_state = dev->usb_state;
        dev->usb_state = USB_STATE_SUSPENDED;
-#ifdef  OTG_TRANSCEIVER
-        if (dev->lotg->otg.default_a) {
-                if (dev->lotg->hsm.b_bus_suspend_vld == 1) {
-                        dev->lotg->hsm.b_bus_suspend = 1;
-                        /* notify transceiver the state changes */
-                        if (spin_trylock(&dev->lotg->wq_lock)) {
-                                langwell_update_transceiver();
-                                spin_unlock(&dev->lotg->wq_lock);
-                        }
-                }
-                dev->lotg->hsm.b_bus_suspend_vld++;
-        } else {
-                if (!dev->lotg->hsm.a_bus_suspend) {
-                        dev->lotg->hsm.a_bus_suspend = 1;
-                        /* notify transceiver the state changes */
-                        if (spin_trylock(&dev->lotg->wq_lock)) {
-                                langwell_update_transceiver();
-                                spin_unlock(&dev->lotg->wq_lock);
-                        }
-                }
-        }
-#endif
        /* report suspend to the driver */
        if (dev->driver) {
                if (dev->driver->suspend) {
@@ -2823,11 +2783,6 @@ static void handle_bus_resume(struct langwell_udc *dev)
        if (dev->pdev->device != 0x0829)
                langwell_phy_low_power(dev, 0);
-#ifdef  OTG_TRANSCEIVER
-        if (dev->lotg->otg.default_a == 0)
-                dev->lotg->hsm.a_bus_suspend = 0;
-#endif
        /* report resume to the driver */
        if (dev->driver) {
                if (dev->driver->resume) {
@@ -3020,7 +2975,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
        dev->done = &done;
-#ifndef OTG_TRANSCEIVER
        /* free dTD dma_pool and dQH */
        if (dev->dtd_pool)
                dma_pool_destroy(dev->dtd_pool);
@@ -3032,7 +2986,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
        /* release SRAM caching */
        if (dev->has_sram && dev->got_sram)
                sram_deinit(dev);
-#endif
        if (dev->status_req) {
                kfree(dev->status_req->req.buf);
@@ -3045,7 +2998,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
        if (dev->got_irq)
                free_irq(pdev->irq, dev);
-#ifndef OTG_TRANSCEIVER
        if (dev->cap_regs)
                iounmap(dev->cap_regs);
@@ -3055,13 +3007,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
        if (dev->enabled)
                pci_disable_device(pdev);
-#else
-        if (dev->transceiver) {
-                otg_put_transceiver(dev->transceiver);
-                dev->transceiver = NULL;
-                dev->lotg = NULL;
-        }
-#endif
        dev->cap_regs = NULL;
@@ -3072,9 +3017,7 @@ static void langwell_udc_remove(struct pci_dev *pdev)
        device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
        device_remove_file(&pdev->dev, &dev_attr_remote_wakeup);
-#ifndef OTG_TRANSCEIVER
        pci_set_drvdata(pdev, NULL);
-#endif
        /* free dev, wait for the release() finished */
        wait_for_completion(&done);
@@ -3089,9 +3032,7 @@ static int langwell_udc_probe(struct pci_dev *pdev,
                const struct pci_device_id *id)
 {
        struct langwell_udc     *dev;
-#ifndef OTG_TRANSCEIVER
        unsigned long           resource, len;
-#endif
        void                    __iomem *base = NULL;
        size_t                  size;
        int                     retval;
@@ -3109,16 +3050,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
        dev->pdev = pdev;
        dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-#ifdef  OTG_TRANSCEIVER
-        /* PCI device is already enabled by otg_transceiver driver */
-        dev->enabled = 1;
-        /* mem region and register base */
-        dev->region = 1;
-        dev->transceiver = otg_get_transceiver();
-        dev->lotg = otg_to_langwell(dev->transceiver);
-        base = dev->lotg->regs;
-#else
        pci_set_drvdata(pdev, dev);
        /* now all the pci goodies ... */
@@ -3139,7 +3070,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
        dev->region = 1;
        base = ioremap_nocache(resource, len);
-#endif
        if (base == NULL) {
                dev_err(&dev->pdev->dev, "can't map memory\n");
                retval = -EFAULT;
@@ -3163,7 +3093,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
        dev->got_sram = 0;
        dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram);
-#ifndef OTG_TRANSCEIVER
        /* enable SRAM caching if detected */
        if (dev->has_sram && !dev->got_sram)
                sram_init(dev);
@@ -3182,7 +3111,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
                goto error;
        }
        dev->got_irq = 1;
-#endif
        /* set stopped bit */
        dev->stopped = 1;
@@ -3257,10 +3185,8 @@ static int langwell_udc_probe(struct pci_dev *pdev,
        dev->remote_wakeup = 0;
        dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
-#ifndef OTG_TRANSCEIVER
        /* reset device controller */
        langwell_udc_reset(dev);
-#endif
        /* initialize gadget structure */
        dev->gadget.ops = &langwell_ops;        /* usb_gadget_ops */
@@ -3268,9 +3194,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
        INIT_LIST_HEAD(&dev->gadget.ep_list);   /* ep_list */
        dev->gadget.speed = USB_SPEED_UNKNOWN;  /* speed */
        dev->gadget.max_speed = USB_SPEED_HIGH; /* support dual speed */
-#ifdef  OTG_TRANSCEIVER
-        dev->gadget.is_otg = 1;                 /* support otg mode */
-#endif
        /* the "gadget" abstracts/virtualizes the controller */
        dev_set_name(&dev->gadget.dev, "gadget");
@@ -3282,10 +3205,8 @@ static int langwell_udc_probe(struct pci_dev *pdev,
        /* controller endpoints reinit */
        eps_reinit(dev);
-#ifndef OTG_TRANSCEIVER
        /* reset ep0 dQH and endptctrl */
        ep0_reset(dev);
-#endif
        /* create dTD dma_pool resource */
        dev->dtd_pool = dma_pool_create("langwell_dtd",
@@ -3367,7 +3288,7 @@ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
        spin_lock_irq(&dev->lock);
        /* stop all usb activities */
-        stop_activity(dev, dev->driver);
+        stop_activity(dev);
        spin_unlock_irq(&dev->lock);
        /* free dTD dma_pool and dQH */
@@ -3525,22 +3446,14 @@ static struct pci_driver langwell_pci_driver = {
 static int __init init(void)
 {
-#ifdef  OTG_TRANSCEIVER
-        return langwell_register_peripheral(&langwell_pci_driver);
-#else
        return pci_register_driver(&langwell_pci_driver);
-#endif
 }
 module_init(init);
 static void __exit cleanup(void)
 {
-#ifdef  OTG_TRANSCEIVER
-        return langwell_unregister_peripheral(&langwell_pci_driver);
-#else
        pci_unregister_driver(&langwell_pci_driver);
-#endif
 }
 module_exit(cleanup);
diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h
index ef79e242b7b0..d6e78accaffe 100644
--- a/drivers/usb/gadget/langwell_udc.h
+++ b/drivers/usb/gadget/langwell_udc.h
@@ -8,7 +8,6 @@
 */
 #include <linux/usb/langwell_udc.h>
-#include <linux/usb/langwell_otg.h>
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index c7f291a331df..85ea14e2545e 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -598,16 +598,16 @@ static __maybe_unused struct usb_ss_cap_descriptor fsg_ss_cap_desc = {
                | USB_5GBPS_OPERATION),
        .bFunctionalitySupport = USB_LOW_SPEED_OPERATION,
        .bU1devExitLat =        USB_DEFAULT_U1_DEV_EXIT_LAT,
-        .bU2DevExitLat =        USB_DEFAULT_U2_DEV_EXIT_LAT,
+        .bU2DevExitLat =        cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT),
 };
 static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = {
        .bLength =              USB_DT_BOS_SIZE,
        .bDescriptorType =      USB_DT_BOS,
-        .wTotalLength =         USB_DT_BOS_SIZE
+        .wTotalLength =         cpu_to_le16(USB_DT_BOS_SIZE
                                + USB_DT_USB_EXT_CAP_SIZE
-                                + USB_DT_USB_SS_CAP_SIZE,
+                                + USB_DT_USB_SS_CAP_SIZE),
        .bNumDeviceCaps =       2,
 };
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index e90344a17631..b556a72264d1 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -125,7 +125,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
         */
        if (pdata->init && pdata->init(pdev)) {
                retval = -ENODEV;
-                goto err3;
+                goto err4;
        }
        /* Enable USB controller, 83xx or 8536 */
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index f4b627d343ac..01bb7241d6ef 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -276,6 +276,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
        /* Serial Bus Release Number is at PCI 0x60 offset */
        pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
+        if (pdev->vendor == PCI_VENDOR_ID_STMICRO
+            && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
+                ehci->sbrn = 0x20; /* ConneXT has no sbrn register */
        /* Keep this around for a while just in case some EHCI
         * implementation uses legacy PCI PM support.  This test
@@ -526,6 +529,9 @@ static const struct pci_device_id pci_ids [] = { {
        /* handle any USB 2.0 EHCI controller */
        PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
        .driver_data =  (unsigned long) &ehci_pci_hc_driver,
+        }, {
+        PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST),
+        .driver_data = (unsigned long) &ehci_pci_hc_driver,
        },
        { /* end: all zeroes */ }
 };
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 5df0b0e3392b..77afabc77f9b 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -139,8 +139,23 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
        }
        iclk = clk_get(&pdev->dev, "ohci_clk");
+        if (IS_ERR(iclk)) {
+                dev_err(&pdev->dev, "failed to get ohci_clk\n");
+                retval = PTR_ERR(iclk);
+                goto err3;
+        }
        fclk = clk_get(&pdev->dev, "uhpck");
+        if (IS_ERR(fclk)) {
+                dev_err(&pdev->dev, "failed to get uhpck\n");
+                retval = PTR_ERR(fclk);
+                goto err4;
+        }
        hclk = clk_get(&pdev->dev, "hclk");
+        if (IS_ERR(hclk)) {
+                dev_err(&pdev->dev, "failed to get hclk\n");
+                retval = PTR_ERR(hclk);
+                goto err5;
+        }
        at91_start_hc(pdev);
        ohci_hcd_init(hcd_to_ohci(hcd));
@@ -153,9 +168,12 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
        at91_stop_hc(pdev);
        clk_put(hclk);
+ err5:
        clk_put(fclk);
+ err4:
        clk_put(iclk);
+ err3:
        iounmap(hcd->regs);
 err2:
@@ -226,7 +244,8 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int
        if (!gpio_is_valid(pdata->vbus_pin[port]))
                return;
-        gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable);
+        gpio_set_value(pdata->vbus_pin[port],
+                       !pdata->vbus_pin_active_low[port] ^ enable);
 }
 static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
@@ -237,7 +256,8 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
        if (!gpio_is_valid(pdata->vbus_pin[port]))
                return -EINVAL;
-        return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted;
+        return gpio_get_value(pdata->vbus_pin[port]) ^
+                !pdata->vbus_pin_active_low[port];
 }
 /*
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 5179fcd73d8a..e4bcb62b930a 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -82,6 +82,14 @@ urb_print(struct urb * urb, char * str, int small, int status)
                ohci_dbg(ohci,format, ## arg ); \
        } while (0);
+/* Version for use where "next" is the address of a local variable */
+#define ohci_dbg_nosw(ohci, next, size, format, arg...) \
+        do { \
+                unsigned s_len; \
+                s_len = scnprintf(*next, *size, format, ## arg); \
+                *size -= s_len; *next += s_len; \
+        } while (0);
 static void ohci_dump_intr_mask (
        struct ohci_hcd *ohci,
@@ -653,7 +661,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
        /* dump driver info, then registers in spec order */
-        ohci_dbg_sw (ohci, &next, &size,
+        ohci_dbg_nosw(ohci, &next, &size,
                "bus %s, device %s\n"
                "%s\n"
                "%s\n",
@@ -672,7 +680,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
        /* hcca */
        if (ohci->hcca)
-                ohci_dbg_sw (ohci, &next, &size,
+                ohci_dbg_nosw(ohci, &next, &size,
                        "hcca frame 0x%04x\n", ohci_frame_no(ohci));
        /* other registers mostly affect frame timings */
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 6109810cc2d3..1843bb68ac7c 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -397,6 +397,10 @@ static const struct pci_device_id pci_ids [] = { {
        /* handle any USB OHCI controller */
        PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
        .driver_data =  (unsigned long) &ohci_pci_hc_driver,
+        }, {
+        /* The device in the ConneXT I/O hub has no class reg */
+        PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI),
+        .driver_data =  (unsigned long) &ohci_pci_hc_driver,
        }, { /* end: all zeroes */ }
 };
 MODULE_DEVICE_TABLE (pci, pci_ids);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index b90e1386418b..b62037bff688 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1204,6 +1204,7 @@ static void handle_vendor_event(struct xhci_hcd *xhci,
 *
 * Returns a zero-based port number, which is suitable for indexing into each of
 * the split roothubs' port arrays and bus state arrays.
+ * Add one to it in order to call xhci_find_slot_id_by_port.
 */
 static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
                struct xhci_hcd *xhci, u32 port_id)
@@ -1324,7 +1325,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
                        xhci_set_link_state(xhci, port_array, faked_port_index,
                                                XDEV_U0);
                        slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-                                        faked_port_index);
+                                        faked_port_index + 1);
                        if (!slot_id) {
                                xhci_dbg(xhci, "slot_id is zero\n");
                                goto cleanup;
@@ -3323,7 +3324,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
                /* Check TD length */
                if (running_total != td_len) {
                        xhci_err(xhci, "ISOC TD length unmatch\n");
-                        return -EINVAL;
+                        ret = -EINVAL;
+                        goto cleanup;
                }
        }
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index d9b6a0355443..da97dcec1f32 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -37,9 +37,6 @@ static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit);
 static int emi26_load_firmware (struct usb_device *dev);
 static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id);
 static void emi26_disconnect(struct usb_interface *intf);
-static int __init emi26_init (void);
-static void __exit emi26_exit (void);
 /* thanks to drivers/usb/serial/keyspan_pda.c code */
 static int emi26_writememory (struct usb_device *dev, int address,
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 9f39062ebb08..4e0f167a6c4e 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -46,9 +46,6 @@ static int emi62_set_reset(struct usb_device *dev, unsigned char reset_bit);
 static int emi62_load_firmware (struct usb_device *dev);
 static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id);
 static void emi62_disconnect(struct usb_interface *intf);
-static int __init emi62_init (void);
-static void __exit emi62_exit (void);
 /* thanks to drivers/usb/serial/keyspan_pda.c code */
 static int emi62_writememory(struct usb_device *dev, int address,
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index 107bf13b1cf1..b2d82b937392 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -24,7 +24,7 @@
 #define VENDOR_ID       0x0fc5
 #define PRODUCT_ID      0x1227
-#define MAXLEN          6
+#define MAXLEN          8
 /* table of devices that work with this driver */
 static const struct usb_device_id id_table[] = {
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index f9a3f62a83b5..7c569f51212a 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -33,9 +33,6 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/memory.h>
-#include <asm/gpio.h>
 #include <mach/cputype.h>
 #include <asm/mach-types.h>
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 56cf0243979e..3d11cf64ebd1 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -981,6 +981,9 @@ static void musb_shutdown(struct platform_device *pdev)
        unsigned long   flags;
        pm_runtime_get_sync(musb->controller);
+        musb_gadget_cleanup(musb);
        spin_lock_irqsave(&musb->lock, flags);
        musb_platform_disable(musb);
        musb_generic_disable(musb);
@@ -1827,8 +1830,6 @@ static void musb_free(struct musb *musb)
        sysfs_remove_group(&musb->controller->kobj, &musb_attr_group);
 #endif
-        musb_gadget_cleanup(musb);
        if (musb->nIrq >= 0) {
                if (musb->irq_wake)
                        disable_irq_wake(musb->nIrq);
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index c27bbbf32b52..df719eae3b03 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -222,7 +222,6 @@ static inline void omap2430_low_level_init(struct musb *musb)
        musb_writel(musb->mregs, OTG_FORCESTDBY, l);
 }
-/* blocking notifier support */
 static int musb_otg_notifications(struct notifier_block *nb,
                unsigned long event, void *unused)
 {
@@ -231,7 +230,7 @@ static int musb_otg_notifications(struct notifier_block *nb,
        musb->xceiv_event = event;
        schedule_work(&musb->otg_notifier_work);
-        return 0;
+        return NOTIFY_OK;
 }
 static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
@@ -386,6 +385,7 @@ static void omap2430_musb_disable(struct musb *musb)
 static int omap2430_musb_exit(struct musb *musb)
 {
        del_timer_sync(&musb_idle_timer);
+        cancel_work_sync(&musb->otg_notifier_work);
        omap2430_low_level_exit(musb);
        otg_put_transceiver(musb->xceiv);
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 2a25955881fc..76d629345418 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -86,20 +86,6 @@ config NOP_USB_XCEIV
          built-in with usb ip or which are autonomous and doesn't require any
          phy programming such as ISP1x04 etc.
-config USB_LANGWELL_OTG
-        tristate "Intel Langwell USB OTG dual-role support"
-        depends on USB && PCI && INTEL_SCU_IPC
-        select USB_OTG
-        select USB_OTG_UTILS
-        help
-          Say Y here if you want to build Intel Langwell USB OTG
-          transciever driver in kernel. This driver implements role
-          switch between EHCI host driver and Langwell USB OTG
-          client driver.
-          To compile this driver as a module, choose M here: the
-          module will be called langwell_otg.
 config USB_MSM_OTG
        tristate "OTG support for Qualcomm on-chip USB controller"
        depends on (USB || USB_GADGET) && ARCH_MSM
@@ -124,7 +110,7 @@ config AB8500_USB
 config FSL_USB2_OTG
        bool "Freescale USB OTG Transceiver Driver"
-        depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2
+        depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 && USB_SUSPEND
        select USB_OTG
        select USB_OTG_UTILS
        help
@@ -132,7 +118,7 @@ config FSL_USB2_OTG
 config USB_MV_OTG
        tristate "Marvell USB OTG support"
-        depends on USB_MV_UDC
+        depends on USB_MV_UDC && USB_SUSPEND
        select USB_OTG
        select USB_OTG_UTILS
        help
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index b2c5a9598637..41aa5098b139 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_USB_GPIO_VBUS)	+= gpio_vbus.o
 obj-$(CONFIG_ISP1301_OMAP)      += isp1301_omap.o
 obj-$(CONFIG_TWL4030_USB)       += twl4030-usb.o
 obj-$(CONFIG_TWL6030_USB)       += twl6030-usb.o
-obj-$(CONFIG_USB_LANGWELL_OTG)  += langwell_otg.o
 obj-$(CONFIG_NOP_USB_XCEIV)     += nop-usb-xceiv.o
 obj-$(CONFIG_USB_ULPI)          += ulpi.o
 obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
deleted file mode 100644
index f08f784086f7..000000000000
--- a/drivers/usb/otg/langwell_otg.c
+++ /dev/null
@@ -1,2347 +0,0 @@
-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008 - 2010, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-/* This driver helps to switch Langwell OTG controller function between host
- * and peripheral. It works with EHCI driver and Langwell client controller
- * driver together.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/moduleparam.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/hcd.h>
-#include <linux/notifier.h>
-#include <linux/delay.h>
-#include <asm/intel_scu_ipc.h>
-#include <linux/usb/langwell_otg.h>
-#define DRIVER_DESC             "Intel Langwell USB OTG transceiver driver"
-#define DRIVER_VERSION          "July 10, 2010"
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Henry Yuan <hang.yuan@intel.com>, Hao Wu <hao.wu@intel.com>");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
-static const char driver_name[] = "langwell_otg";
-static int langwell_otg_probe(struct pci_dev *pdev,
-                        const struct pci_device_id *id);
-static void langwell_otg_remove(struct pci_dev *pdev);
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message);
-static int langwell_otg_resume(struct pci_dev *pdev);
-static int langwell_otg_set_host(struct otg_transceiver *otg,
-                                struct usb_bus *host);
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
-                                struct usb_gadget *gadget);
-static int langwell_otg_start_srp(struct otg_transceiver *otg);
-static const struct pci_device_id pci_ids[] = {{
-        .class =        ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
-        .class_mask =   ~0,
-        .vendor =       0x8086,
-        .device =       0x0811,
-        .subvendor =    PCI_ANY_ID,
-        .subdevice =    PCI_ANY_ID,
-}, { /* end: all zeroes */ }
-};
-static struct pci_driver otg_pci_driver = {
-        .name =         (char *) driver_name,
-        .id_table =     pci_ids,
-        .probe =        langwell_otg_probe,
-        .remove =       langwell_otg_remove,
-        .suspend =      langwell_otg_suspend,
-        .resume =       langwell_otg_resume,
-};
-/* HSM timers */
-static inline struct langwell_otg_timer *otg_timer_initializer
-(void (*function)(unsigned long), unsigned long expires, unsigned long data)
-{
-        struct langwell_otg_timer *timer;
-        timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL);
-        if (timer == NULL)
-                return timer;
-        timer->function = function;
-        timer->expires = expires;
-        timer->data = data;
-        return timer;
-}
-static struct langwell_otg_timer *a_wait_vrise_tmr, *a_aidl_bdis_tmr,
-        *b_se0_srp_tmr, *b_srp_init_tmr;
-static struct list_head active_timers;
-static struct langwell_otg *the_transceiver;
-/* host/client notify transceiver when event affects HNP state */
-void langwell_update_transceiver(void)
-{
-        struct langwell_otg *lnw = the_transceiver;
-        dev_dbg(lnw->dev, "transceiver is updated\n");
-        if (!lnw->qwork)
-                return ;
-        queue_work(lnw->qwork, &lnw->work);
-}
-EXPORT_SYMBOL(langwell_update_transceiver);
-static int langwell_otg_set_host(struct otg_transceiver *otg,
-                                        struct usb_bus *host)
-{
-        otg->host = host;
-        return 0;
-}
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
-                                        struct usb_gadget *gadget)
-{
-        otg->gadget = gadget;
-        return 0;
-}
-static int langwell_otg_set_power(struct otg_transceiver *otg,
-                                unsigned mA)
-{
-        return 0;
-}
-/* A-device drives vbus, controlled through IPC commands */
-static int langwell_otg_set_vbus(struct otg_transceiver *otg, bool enabled)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        u8                              sub_id;
-        dev_dbg(lnw->dev, "%s <--- %s\n", __func__, enabled ? "on" : "off");
-        if (enabled)
-                sub_id = 0x8; /* Turn on the VBus */
-        else
-                sub_id = 0x9; /* Turn off the VBus */
-        if (intel_scu_ipc_simple_command(0xef, sub_id)) {
-                dev_dbg(lnw->dev, "Failed to set Vbus via IPC commands\n");
-                return -EBUSY;
-        }
-        dev_dbg(lnw->dev, "%s --->\n", __func__);
-        return 0;
-}
-/* charge vbus or discharge vbus through a resistor to ground */
-static void langwell_otg_chrg_vbus(int on)
-{
-        struct langwell_otg     *lnw = the_transceiver;
-        u32     val;
-        val = readl(lnw->iotg.base + CI_OTGSC);
-        if (on)
-                writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC,
-                                lnw->iotg.base + CI_OTGSC);
-        else
-                writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD,
-                                lnw->iotg.base + CI_OTGSC);
-}
-/* Start SRP */
-static int langwell_otg_start_srp(struct otg_transceiver *otg)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        struct intel_mid_otg_xceiv      *iotg = &lnw->iotg;
-        u32                             val;
-        dev_dbg(lnw->dev, "%s --->\n", __func__);
-        val = readl(iotg->base + CI_OTGSC);
-        writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP,
-                                iotg->base + CI_OTGSC);
-        /* Check if the data plus is finished or not */
-        msleep(8);
-        val = readl(iotg->base + CI_OTGSC);
-        if (val & (OTGSC_HADP | OTGSC_DP))
-                dev_dbg(lnw->dev, "DataLine SRP Error\n");
-        /* Disable interrupt - b_sess_vld */
-        val = readl(iotg->base + CI_OTGSC);
-        val &= (~(OTGSC_BSVIE | OTGSC_BSEIE));
-        writel(val, iotg->base + CI_OTGSC);
-        /* Start VBus SRP, drive vbus to generate VBus pulse */
-        iotg->otg.set_vbus(&iotg->otg, true);
-        msleep(15);
-        iotg->otg.set_vbus(&iotg->otg, false);
-        /* Enable interrupt - b_sess_vld*/
-        val = readl(iotg->base + CI_OTGSC);
-        dev_dbg(lnw->dev, "after VBUS pulse otgsc = %x\n", val);
-        val |= (OTGSC_BSVIE | OTGSC_BSEIE);
-        writel(val, iotg->base + CI_OTGSC);
-        /* If Vbus is valid, then update the hsm */
-        if (val & OTGSC_BSV) {
-                dev_dbg(lnw->dev, "no b_sess_vld interrupt\n");
-                lnw->iotg.hsm.b_sess_vld = 1;
-                langwell_update_transceiver();
-        }
-        dev_dbg(lnw->dev, "%s <---\n", __func__);
-        return 0;
-}
-/* stop SOF via bus_suspend */
-static void langwell_otg_loc_sof(int on)
-{
-        struct langwell_otg     *lnw = the_transceiver;
-        struct usb_hcd          *hcd;
-        int                     err;
-        dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "suspend" : "resume");
-        hcd = bus_to_hcd(lnw->iotg.otg.host);
-        if (on)
-                err = hcd->driver->bus_resume(hcd);
-        else
-                err = hcd->driver->bus_suspend(hcd);
-        if (err)
-                dev_dbg(lnw->dev, "Fail to resume/suspend USB bus - %d\n", err);
-        dev_dbg(lnw->dev, "%s <---\n", __func__);
-}
-static int langwell_otg_check_otgsc(void)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        u32                             otgsc, usbcfg;
-        dev_dbg(lnw->dev, "check sync OTGSC and USBCFG registers\n");
-        otgsc = readl(lnw->iotg.base + CI_OTGSC);
-        usbcfg = readl(lnw->usbcfg);
-        dev_dbg(lnw->dev, "OTGSC = %08x, USBCFG = %08x\n",
-                                        otgsc, usbcfg);
-        dev_dbg(lnw->dev, "OTGSC_AVV = %d\n", !!(otgsc & OTGSC_AVV));
-        dev_dbg(lnw->dev, "USBCFG.VBUSVAL = %d\n",
-                                        !!(usbcfg & USBCFG_VBUSVAL));
-        dev_dbg(lnw->dev, "OTGSC_ASV = %d\n", !!(otgsc & OTGSC_ASV));
-        dev_dbg(lnw->dev, "USBCFG.AVALID = %d\n",
-                                        !!(usbcfg & USBCFG_AVALID));
-        dev_dbg(lnw->dev, "OTGSC_BSV = %d\n", !!(otgsc & OTGSC_BSV));
-        dev_dbg(lnw->dev, "USBCFG.BVALID = %d\n",
-                                        !!(usbcfg & USBCFG_BVALID));
-        dev_dbg(lnw->dev, "OTGSC_BSE = %d\n", !!(otgsc & OTGSC_BSE));
-        dev_dbg(lnw->dev, "USBCFG.SESEND = %d\n",
-                                        !!(usbcfg & USBCFG_SESEND));
-        /* Check USBCFG VBusValid/AValid/BValid/SessEnd */
-        if (!!(otgsc & OTGSC_AVV) ^ !!(usbcfg & USBCFG_VBUSVAL)) {
-                dev_dbg(lnw->dev, "OTGSC.AVV != USBCFG.VBUSVAL\n");
-                goto err;
-        }
-        if (!!(otgsc & OTGSC_ASV) ^ !!(usbcfg & USBCFG_AVALID)) {
-                dev_dbg(lnw->dev, "OTGSC.ASV != USBCFG.AVALID\n");
-                goto err;
-        }
-        if (!!(otgsc & OTGSC_BSV) ^ !!(usbcfg & USBCFG_BVALID)) {
-                dev_dbg(lnw->dev, "OTGSC.BSV != USBCFG.BVALID\n");
-                goto err;
-        }
-        if (!!(otgsc & OTGSC_BSE) ^ !!(usbcfg & USBCFG_SESEND)) {
-                dev_dbg(lnw->dev, "OTGSC.BSE != USBCFG.SESSEN\n");
-                goto err;
-        }
-        dev_dbg(lnw->dev, "OTGSC and USBCFG are synced\n");
-        return 0;
-err:
-        dev_warn(lnw->dev, "OTGSC isn't equal to USBCFG\n");
-        return -EPIPE;
-}
-static void langwell_otg_phy_low_power(int on)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        struct intel_mid_otg_xceiv      *iotg = &lnw->iotg;
-        u8                              val, phcd;
-        int                             retval;
-        dev_dbg(lnw->dev, "%s ---> %s mode\n",
-                        __func__, on ? "Low power" : "Normal");
-        phcd = 0x40;
-        val = readb(iotg->base + CI_HOSTPC1 + 2);
-        if (on) {
-                /* Due to hardware issue, after set PHCD, sync will failed
-                 * between USBCFG and OTGSC, so before set PHCD, check if
-                 * sync is in process now. If the answer is "yes", then do
-                 * not touch PHCD bit */
-                retval = langwell_otg_check_otgsc();
-                if (retval) {
-                        dev_dbg(lnw->dev, "Skip PHCD programming..\n");
-                        return ;
-                }
-                writeb(val | phcd, iotg->base + CI_HOSTPC1 + 2);
-        } else
-                writeb(val & ~phcd, iotg->base + CI_HOSTPC1 + 2);
-        dev_dbg(lnw->dev, "%s <--- done\n", __func__);
-}
-/* After drv vbus, add 5 ms delay to set PHCD */
-static void langwell_otg_phy_low_power_wait(int on)
-{
-        struct langwell_otg     *lnw = the_transceiver;
-        dev_dbg(lnw->dev, "add 5ms delay before programing PHCD\n");
-        mdelay(5);
-        langwell_otg_phy_low_power(on);
-}
-/* Enable/Disable OTG interrupt */
-static void langwell_otg_intr(int on)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        struct intel_mid_otg_xceiv      *iotg = &lnw->iotg;
-        u32                             val;
-        dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off");
-        val = readl(iotg->base + CI_OTGSC);
-        /* OTGSC_INT_MASK doesn't contains 1msInt */
-        if (on) {
-                val = val | (OTGSC_INT_MASK);
-                writel(val, iotg->base + CI_OTGSC);
-        } else {
-                val = val & ~(OTGSC_INT_MASK);
-                writel(val, iotg->base + CI_OTGSC);
-        }
-        dev_dbg(lnw->dev, "%s <---\n", __func__);
-}
-/* set HAAR: Hardware Assist Auto-Reset */
-static void langwell_otg_HAAR(int on)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        struct intel_mid_otg_xceiv      *iotg = &lnw->iotg;
-        u32                             val;
-        dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off");
-        val = readl(iotg->base + CI_OTGSC);
-        if (on)
-                writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR,
-                                        iotg->base + CI_OTGSC);
-        else
-                writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR,
-                                        iotg->base + CI_OTGSC);
-        dev_dbg(lnw->dev, "%s <---\n", __func__);
-}
-/* set HABA: Hardware Assist B-Disconnect to A-Connect */
-static void langwell_otg_HABA(int on)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        struct intel_mid_otg_xceiv      *iotg = &lnw->iotg;
-        u32                             val;
-        dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off");
-        val = readl(iotg->base + CI_OTGSC);
-        if (on)
-                writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA,
-                                        iotg->base + CI_OTGSC);
-        else
-                writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA,
-                                        iotg->base + CI_OTGSC);
-        dev_dbg(lnw->dev, "%s <---\n", __func__);
-}
-static int langwell_otg_check_se0_srp(int on)
-{
-        struct langwell_otg     *lnw = the_transceiver;
-        int                     delay_time = TB_SE0_SRP * 10;
-        u32                     val;
-        dev_dbg(lnw->dev, "%s --->\n", __func__);
-        do {
-                udelay(100);
-                if (!delay_time--)
-                        break;
-                val = readl(lnw->iotg.base + CI_PORTSC1);
-                val &= PORTSC_LS;
-        } while (!val);
-        dev_dbg(lnw->dev, "%s <---\n", __func__);
-        return val;
-}
-/* The timeout callback function to set time out bit */
-static void set_tmout(unsigned long indicator)
-{
-        *(int *)indicator = 1;
-}
-void langwell_otg_nsf_msg(unsigned long indicator)
-{
-        struct langwell_otg     *lnw = the_transceiver;
-        switch (indicator) {
-        case 2:
-        case 4:
-        case 6:
-        case 7:
-                dev_warn(lnw->dev,
-                        "OTG:NSF-%lu - deivce not responding\n", indicator);
-                break;
-        case 3:
-                dev_warn(lnw->dev,
-                        "OTG:NSF-%lu - deivce not supported\n", indicator);
-                break;
-        default:
-                dev_warn(lnw->dev, "Do not have this kind of NSF\n");
-                break;
-        }
-}
-/* Initialize timers */
-static int langwell_otg_init_timers(struct otg_hsm *hsm)
-{
-        /* HSM used timers */
-        a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
-                                (unsigned long)&hsm->a_wait_vrise_tmout);
-        if (a_wait_vrise_tmr == NULL)
-                return -ENOMEM;
-        a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
-                                (unsigned long)&hsm->a_aidl_bdis_tmout);
-        if (a_aidl_bdis_tmr == NULL)
-                return -ENOMEM;
-        b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
-                                (unsigned long)&hsm->b_se0_srp);
-        if (b_se0_srp_tmr == NULL)
-                return -ENOMEM;
-        b_srp_init_tmr = otg_timer_initializer(&set_tmout, TB_SRP_INIT,
-                                (unsigned long)&hsm->b_srp_init_tmout);
-        if (b_srp_init_tmr == NULL)
-                return -ENOMEM;
-        return 0;
-}
-/* Free timers */
-static void langwell_otg_free_timers(void)
-{
-        kfree(a_wait_vrise_tmr);
-        kfree(a_aidl_bdis_tmr);
-        kfree(b_se0_srp_tmr);
-        kfree(b_srp_init_tmr);
-}
-/* The timeout callback function to set time out bit */
-static void langwell_otg_timer_fn(unsigned long indicator)
-{
-        struct langwell_otg *lnw = the_transceiver;
-        *(int *)indicator = 1;
-        dev_dbg(lnw->dev, "kernel timer - timeout\n");
-        langwell_update_transceiver();
-}
-/* kernel timer used instead of HW based interrupt */
-static void langwell_otg_add_ktimer(enum langwell_otg_timer_type timers)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        struct intel_mid_otg_xceiv      *iotg = &lnw->iotg;
-        unsigned long           j = jiffies;
-        unsigned long           data, time;
-        switch (timers) {
-        case TA_WAIT_VRISE_TMR:
-                iotg->hsm.a_wait_vrise_tmout = 0;
-                data = (unsigned long)&iotg->hsm.a_wait_vrise_tmout;
-                time = TA_WAIT_VRISE;
-                break;
-        case TA_WAIT_BCON_TMR:
-                iotg->hsm.a_wait_bcon_tmout = 0;
-                data = (unsigned long)&iotg->hsm.a_wait_bcon_tmout;
-                time = TA_WAIT_BCON;
-                break;
-        case TA_AIDL_BDIS_TMR:
-                iotg->hsm.a_aidl_bdis_tmout = 0;
-                data = (unsigned long)&iotg->hsm.a_aidl_bdis_tmout;
-                time = TA_AIDL_BDIS;
-                break;
-        case TB_ASE0_BRST_TMR:
-                iotg->hsm.b_ase0_brst_tmout = 0;
-                data = (unsigned long)&iotg->hsm.b_ase0_brst_tmout;
-                time = TB_ASE0_BRST;
-                break;
-        case TB_SRP_INIT_TMR:
-                iotg->hsm.b_srp_init_tmout = 0;
-                data = (unsigned long)&iotg->hsm.b_srp_init_tmout;
-                time = TB_SRP_INIT;
-                break;
-        case TB_SRP_FAIL_TMR:
-                iotg->hsm.b_srp_fail_tmout = 0;
-                data = (unsigned long)&iotg->hsm.b_srp_fail_tmout;
-                time = TB_SRP_FAIL;
-                break;
-        case TB_BUS_SUSPEND_TMR:
-                iotg->hsm.b_bus_suspend_tmout = 0;
-                data = (unsigned long)&iotg->hsm.b_bus_suspend_tmout;
-                time = TB_BUS_SUSPEND;
-                break;
-        default:
-                dev_dbg(lnw->dev, "unknown timer, cannot enable it\n");
-                return;
-        }
-        lnw->hsm_timer.data = data;
-        lnw->hsm_timer.function = langwell_otg_timer_fn;
-        lnw->hsm_timer.expires = j + time * HZ / 1000; /* milliseconds */
-        add_timer(&lnw->hsm_timer);
-        dev_dbg(lnw->dev, "add timer successfully\n");
-}
-/* Add timer to timer list */
-static void langwell_otg_add_timer(void *gtimer)
-{
-        struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
-        struct langwell_otg_timer *tmp_timer;
-        struct intel_mid_otg_xceiv *iotg = &the_transceiver->iotg;
-        u32     val32;
-        /* Check if the timer is already in the active list,
-         * if so update timer count
-         */
-        list_for_each_entry(tmp_timer, &active_timers, list)
-                if (tmp_timer == timer) {
-                        timer->count = timer->expires;
-                        return;
-                }
-        timer->count = timer->expires;
-        if (list_empty(&active_timers)) {
-                val32 = readl(iotg->base + CI_OTGSC);
-                writel(val32 | OTGSC_1MSE, iotg->base + CI_OTGSC);
-        }
-        list_add_tail(&timer->list, &active_timers);
-}
-/* Remove timer from the timer list; clear timeout status */
-static void langwell_otg_del_timer(void *gtimer)
-{
-        struct langwell_otg *lnw = the_transceiver;
-        struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
-        struct langwell_otg_timer *tmp_timer, *del_tmp;
-        u32 val32;
-        list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
-                if (tmp_timer == timer)
-                        list_del(&timer->list);
-        if (list_empty(&active_timers)) {
-                val32 = readl(lnw->iotg.base + CI_OTGSC);
-                writel(val32 & ~OTGSC_1MSE, lnw->iotg.base + CI_OTGSC);
-        }
-}
-/* Reduce timer count by 1, and find timeout conditions.*/
-static int langwell_otg_tick_timer(u32 *int_sts)
-{
-        struct langwell_otg     *lnw = the_transceiver;
-        struct langwell_otg_timer *tmp_timer, *del_tmp;
-        int expired = 0;
-        list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
-                tmp_timer->count--;
-                /* check if timer expires */
-                if (!tmp_timer->count) {
-                        list_del(&tmp_timer->list);
-                        tmp_timer->function(tmp_timer->data);
-                        expired = 1;
-                }
-        }
-        if (list_empty(&active_timers)) {
-                dev_dbg(lnw->dev, "tick timer: disable 1ms int\n");
-                *int_sts = *int_sts & ~OTGSC_1MSE;
-        }
-        return expired;
-}
-static void reset_otg(void)
-{
-        struct langwell_otg     *lnw = the_transceiver;
-        int                     delay_time = 1000;
-        u32                     val;
-        dev_dbg(lnw->dev, "reseting OTG controller ...\n");
-        val = readl(lnw->iotg.base + CI_USBCMD);
-        writel(val | USBCMD_RST, lnw->iotg.base + CI_USBCMD);
-        do {
-                udelay(100);
-                if (!delay_time--)
-                        dev_dbg(lnw->dev, "reset timeout\n");
-                val = readl(lnw->iotg.base + CI_USBCMD);
-                val &= USBCMD_RST;
-        } while (val != 0);
-        dev_dbg(lnw->dev, "reset done.\n");
-}
-static void set_host_mode(void)
-{
-        struct langwell_otg     *lnw = the_transceiver;
-        u32                     val;
-        reset_otg();
-        val = readl(lnw->iotg.base + CI_USBMODE);
-        val = (val & (~USBMODE_CM)) | USBMODE_HOST;
-        writel(val, lnw->iotg.base + CI_USBMODE);
-}
-static void set_client_mode(void)
-{
-        struct langwell_otg     *lnw = the_transceiver;
-        u32                     val;
-        reset_otg();
-        val = readl(lnw->iotg.base + CI_USBMODE);
-        val = (val & (~USBMODE_CM)) | USBMODE_DEVICE;
-        writel(val, lnw->iotg.base + CI_USBMODE);
-}
-static void init_hsm(void)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        struct intel_mid_otg_xceiv      *iotg = &lnw->iotg;
-        u32                             val32;
-        /* read OTGSC after reset */
-        val32 = readl(lnw->iotg.base + CI_OTGSC);
-        dev_dbg(lnw->dev, "%s: OTGSC init value = 0x%x\n", __func__, val32);
-        /* set init state */
-        if (val32 & OTGSC_ID) {
-                iotg->hsm.id = 1;
-                iotg->otg.default_a = 0;
-                set_client_mode();
-                iotg->otg.state = OTG_STATE_B_IDLE;
-        } else {
-                iotg->hsm.id = 0;
-                iotg->otg.default_a = 1;
-                set_host_mode();
-                iotg->otg.state = OTG_STATE_A_IDLE;
-        }
-        /* set session indicator */
-        if (val32 & OTGSC_BSE)
-                iotg->hsm.b_sess_end = 1;
-        if (val32 & OTGSC_BSV)
-                iotg->hsm.b_sess_vld = 1;
-        if (val32 & OTGSC_ASV)
-                iotg->hsm.a_sess_vld = 1;
-        if (val32 & OTGSC_AVV)
-                iotg->hsm.a_vbus_vld = 1;
-        /* defautly power the bus */
-        iotg->hsm.a_bus_req = 1;
-        iotg->hsm.a_bus_drop = 0;
-        /* defautly don't request bus as B device */
-        iotg->hsm.b_bus_req = 0;
-        /* no system error */
-        iotg->hsm.a_clr_err = 0;
-        langwell_otg_phy_low_power_wait(1);
-}
-static void update_hsm(void)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        struct intel_mid_otg_xceiv      *iotg = &lnw->iotg;
-        u32                             val32;
-        /* read OTGSC */
-        val32 = readl(lnw->iotg.base + CI_OTGSC);
-        dev_dbg(lnw->dev, "%s: OTGSC value = 0x%x\n", __func__, val32);
-        iotg->hsm.id = !!(val32 & OTGSC_ID);
-        iotg->hsm.b_sess_end = !!(val32 & OTGSC_BSE);
-        iotg->hsm.b_sess_vld = !!(val32 & OTGSC_BSV);
-        iotg->hsm.a_sess_vld = !!(val32 & OTGSC_ASV);
-        iotg->hsm.a_vbus_vld = !!(val32 & OTGSC_AVV);
-}
-static irqreturn_t otg_dummy_irq(int irq, void *_dev)
-{
-        struct langwell_otg     *lnw = the_transceiver;
-        void __iomem            *reg_base = _dev;
-        u32                     val;
-        u32                     int_mask = 0;
-        val = readl(reg_base + CI_USBMODE);
-        if ((val & USBMODE_CM) != USBMODE_DEVICE)
-                return IRQ_NONE;
-        val = readl(reg_base + CI_USBSTS);
-        int_mask = val & INTR_DUMMY_MASK;
-        if (int_mask == 0)
-                return IRQ_NONE;
-        /* clear hsm.b_conn here since host driver can't detect it
-        *  otg_dummy_irq called means B-disconnect happened.
-        */
-        if (lnw->iotg.hsm.b_conn) {
-                lnw->iotg.hsm.b_conn = 0;
-                if (spin_trylock(&lnw->wq_lock)) {
-                        langwell_update_transceiver();
-                        spin_unlock(&lnw->wq_lock);
-                }
-        }
-        /* Clear interrupts */
-        writel(int_mask, reg_base + CI_USBSTS);
-        return IRQ_HANDLED;
-}
-static irqreturn_t otg_irq(int irq, void *_dev)
-{
-        struct langwell_otg             *lnw = _dev;
-        struct intel_mid_otg_xceiv      *iotg = &lnw->iotg;
-        u32                             int_sts, int_en;
-        u32                             int_mask = 0;
-        int                             flag = 0;
-        int_sts = readl(lnw->iotg.base + CI_OTGSC);
-        int_en = (int_sts & OTGSC_INTEN_MASK) >> 8;
-        int_mask = int_sts & int_en;
-        if (int_mask == 0)
-                return IRQ_NONE;
-        if (int_mask & OTGSC_IDIS) {
-                dev_dbg(lnw->dev, "%s: id change int\n", __func__);
-                iotg->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0;
-                dev_dbg(lnw->dev, "id = %d\n", iotg->hsm.id);
-                flag = 1;
-        }
-        if (int_mask & OTGSC_DPIS) {
-                dev_dbg(lnw->dev, "%s: data pulse int\n", __func__);
-                iotg->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0;
-                dev_dbg(lnw->dev, "data pulse = %d\n", iotg->hsm.a_srp_det);
-                flag = 1;
-        }
-        if (int_mask & OTGSC_BSEIS) {
-                dev_dbg(lnw->dev, "%s: b session end int\n", __func__);
-                iotg->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0;
-                dev_dbg(lnw->dev, "b_sess_end = %d\n", iotg->hsm.b_sess_end);
-                flag = 1;
-        }
-        if (int_mask & OTGSC_BSVIS) {
-                dev_dbg(lnw->dev, "%s: b session valid int\n", __func__);
-                iotg->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0;
-                dev_dbg(lnw->dev, "b_sess_vld = %d\n", iotg->hsm.b_sess_end);
-                flag = 1;
-        }
-        if (int_mask & OTGSC_ASVIS) {
-                dev_dbg(lnw->dev, "%s: a session valid int\n", __func__);
-                iotg->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0;
-                dev_dbg(lnw->dev, "a_sess_vld = %d\n", iotg->hsm.a_sess_vld);
-                flag = 1;
-        }
-        if (int_mask & OTGSC_AVVIS) {
-                dev_dbg(lnw->dev, "%s: a vbus valid int\n", __func__);
-                iotg->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0;
-                dev_dbg(lnw->dev, "a_vbus_vld = %d\n", iotg->hsm.a_vbus_vld);
-                flag = 1;
-        }
-        if (int_mask & OTGSC_1MSS) {
-                /* need to schedule otg_work if any timer is expired */
-                if (langwell_otg_tick_timer(&int_sts))
-                        flag = 1;
-        }
-        writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask,
-                                        lnw->iotg.base + CI_OTGSC);
-        if (flag)
-                langwell_update_transceiver();
-        return IRQ_HANDLED;
-}
-static int langwell_otg_iotg_notify(struct notifier_block *nb,
-                                unsigned long action, void *data)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        struct intel_mid_otg_xceiv      *iotg = data;
-        int                             flag = 0;
-        if (iotg == NULL)
-                return NOTIFY_BAD;
-        if (lnw == NULL)
-                return NOTIFY_BAD;
-        switch (action) {
-        case MID_OTG_NOTIFY_CONNECT:
-                dev_dbg(lnw->dev, "Lnw OTG Notify Connect Event\n");
-                if (iotg->otg.default_a == 1)
-                        iotg->hsm.b_conn = 1;
-                else
-                        iotg->hsm.a_conn = 1;
-                flag = 1;
-                break;
-        case MID_OTG_NOTIFY_DISCONN:
-                dev_dbg(lnw->dev, "Lnw OTG Notify Disconnect Event\n");
-                if (iotg->otg.default_a == 1)
-                        iotg->hsm.b_conn = 0;
-                else
-                        iotg->hsm.a_conn = 0;
-                flag = 1;
-                break;
-        case MID_OTG_NOTIFY_HSUSPEND:
-                dev_dbg(lnw->dev, "Lnw OTG Notify Host Bus suspend Event\n");
-                if (iotg->otg.default_a == 1)
-                        iotg->hsm.a_suspend_req = 1;
-                else
-                        iotg->hsm.b_bus_req = 0;
-                flag = 1;
-                break;
-        case MID_OTG_NOTIFY_HRESUME:
-                dev_dbg(lnw->dev, "Lnw OTG Notify Host Bus resume Event\n");
-                if (iotg->otg.default_a == 1)
-                        iotg->hsm.b_bus_resume = 1;
-                flag = 1;
-                break;
-        case MID_OTG_NOTIFY_CSUSPEND:
-                dev_dbg(lnw->dev, "Lnw OTG Notify Client Bus suspend Event\n");
-                if (iotg->otg.default_a == 1) {
-                        if (iotg->hsm.b_bus_suspend_vld == 2) {
-                                iotg->hsm.b_bus_suspend = 1;
-                                iotg->hsm.b_bus_suspend_vld = 0;
-                                flag = 1;
-                        } else {
-                                iotg->hsm.b_bus_suspend_vld++;
-                                flag = 0;
-                        }
-                } else {
-                        if (iotg->hsm.a_bus_suspend == 0) {
-                                iotg->hsm.a_bus_suspend = 1;
-                                flag = 1;
-                        }
-                }
-                break;
-        case MID_OTG_NOTIFY_CRESUME:
-                dev_dbg(lnw->dev, "Lnw OTG Notify Client Bus resume Event\n");
-                if (iotg->otg.default_a == 0)
-                        iotg->hsm.a_bus_suspend = 0;
-                flag = 0;
-                break;
-        case MID_OTG_NOTIFY_HOSTADD:
-                dev_dbg(lnw->dev, "Lnw OTG Nofity Host Driver Add\n");
-                flag = 1;
-                break;
-        case MID_OTG_NOTIFY_HOSTREMOVE:
-                dev_dbg(lnw->dev, "Lnw OTG Nofity Host Driver remove\n");
-                flag = 1;
-                break;
-        case MID_OTG_NOTIFY_CLIENTADD:
-                dev_dbg(lnw->dev, "Lnw OTG Nofity Client Driver Add\n");
-                flag = 1;
-                break;
-        case MID_OTG_NOTIFY_CLIENTREMOVE:
-                dev_dbg(lnw->dev, "Lnw OTG Nofity Client Driver remove\n");
-                flag = 1;
-                break;
-        default:
-                dev_dbg(lnw->dev, "Lnw OTG Nofity unknown notify message\n");
-                return NOTIFY_DONE;
-        }
-        if (flag)
-                langwell_update_transceiver();
-        return NOTIFY_OK;
-}
-static void langwell_otg_work(struct work_struct *work)
-{
-        struct langwell_otg             *lnw;
-        struct intel_mid_otg_xceiv      *iotg;
-        int                             retval;
-        struct pci_dev                  *pdev;
-        lnw = container_of(work, struct langwell_otg, work);
-        iotg = &lnw->iotg;
-        pdev = to_pci_dev(lnw->dev);
-        dev_dbg(lnw->dev, "%s: old state = %s\n", __func__,
-                        otg_state_string(iotg->otg.state));
-        switch (iotg->otg.state) {
-        case OTG_STATE_UNDEFINED:
-        case OTG_STATE_B_IDLE:
-                if (!iotg->hsm.id) {
-                        langwell_otg_del_timer(b_srp_init_tmr);
-                        del_timer_sync(&lnw->hsm_timer);
-                        iotg->otg.default_a = 1;
-                        iotg->hsm.a_srp_det = 0;
-                        langwell_otg_chrg_vbus(0);
-                        set_host_mode();
-                        langwell_otg_phy_low_power(1);
-                        iotg->otg.state = OTG_STATE_A_IDLE;
-                        langwell_update_transceiver();
-                } else if (iotg->hsm.b_sess_vld) {
-                        langwell_otg_del_timer(b_srp_init_tmr);
-                        del_timer_sync(&lnw->hsm_timer);
-                        iotg->hsm.b_sess_end = 0;
-                        iotg->hsm.a_bus_suspend = 0;
-                        langwell_otg_chrg_vbus(0);
-                        if (lnw->iotg.start_peripheral) {
-                                lnw->iotg.start_peripheral(&lnw->iotg);
-                                iotg->otg.state = OTG_STATE_B_PERIPHERAL;
-                        } else
-                                dev_dbg(lnw->dev, "client driver not loaded\n");
-                } else if (iotg->hsm.b_srp_init_tmout) {
-                        iotg->hsm.b_srp_init_tmout = 0;
-                        dev_warn(lnw->dev, "SRP init timeout\n");
-                } else if (iotg->hsm.b_srp_fail_tmout) {
-                        iotg->hsm.b_srp_fail_tmout = 0;
-                        iotg->hsm.b_bus_req = 0;
-                        /* No silence failure */
-                        langwell_otg_nsf_msg(6);
-                } else if (iotg->hsm.b_bus_req && iotg->hsm.b_sess_end) {
-                        del_timer_sync(&lnw->hsm_timer);
-                        /* workaround for b_se0_srp detection */
-                        retval = langwell_otg_check_se0_srp(0);
-                        if (retval) {
-                                iotg->hsm.b_bus_req = 0;
-                                dev_dbg(lnw->dev, "LS isn't SE0, try later\n");
-                        } else {
-                                /* clear the PHCD before start srp */
-                                langwell_otg_phy_low_power(0);
-                                /* Start SRP */
-                                langwell_otg_add_timer(b_srp_init_tmr);
-                                iotg->otg.start_srp(&iotg->otg);
-                                langwell_otg_del_timer(b_srp_init_tmr);
-                                langwell_otg_add_ktimer(TB_SRP_FAIL_TMR);
-                                /* reset PHY low power mode here */
-                                langwell_otg_phy_low_power_wait(1);
-                        }
-                }
-                break;
-        case OTG_STATE_B_SRP_INIT:
-                if (!iotg->hsm.id) {
-                        iotg->otg.default_a = 1;
-                        iotg->hsm.a_srp_det = 0;
-                        /* Turn off VBus */
-                        iotg->otg.set_vbus(&iotg->otg, false);
-                        langwell_otg_chrg_vbus(0);
-                        set_host_mode();
-                        langwell_otg_phy_low_power(1);
-                        iotg->otg.state = OTG_STATE_A_IDLE;
-                        langwell_update_transceiver();
-                } else if (iotg->hsm.b_sess_vld) {
-                        langwell_otg_chrg_vbus(0);
-                        if (lnw->iotg.start_peripheral) {
-                                lnw->iotg.start_peripheral(&lnw->iotg);
-                                iotg->otg.state = OTG_STATE_B_PERIPHERAL;
-                        } else
-                                dev_dbg(lnw->dev, "client driver not loaded\n");
-                }
-                break;
-        case OTG_STATE_B_PERIPHERAL:
-                if (!iotg->hsm.id) {
-                        iotg->otg.default_a = 1;
-                        iotg->hsm.a_srp_det = 0;
-                        langwell_otg_chrg_vbus(0);
-                        if (lnw->iotg.stop_peripheral)
-                                lnw->iotg.stop_peripheral(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "client driver has been removed.\n");
-                        set_host_mode();
-                        langwell_otg_phy_low_power(1);
-                        iotg->otg.state = OTG_STATE_A_IDLE;
-                        langwell_update_transceiver();
-                } else if (!iotg->hsm.b_sess_vld) {
-                        iotg->hsm.b_hnp_enable = 0;
-                        if (lnw->iotg.stop_peripheral)
-                                lnw->iotg.stop_peripheral(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "client driver has been removed.\n");
-                        iotg->otg.state = OTG_STATE_B_IDLE;
-                } else if (iotg->hsm.b_bus_req && iotg->otg.gadget &&
-                                        iotg->otg.gadget->b_hnp_enable &&
-                                        iotg->hsm.a_bus_suspend) {
-                        if (lnw->iotg.stop_peripheral)
-                                lnw->iotg.stop_peripheral(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "client driver has been removed.\n");
-                        langwell_otg_HAAR(1);
-                        iotg->hsm.a_conn = 0;
-                        if (lnw->iotg.start_host) {
-                                lnw->iotg.start_host(&lnw->iotg);
-                                iotg->otg.state = OTG_STATE_B_WAIT_ACON;
-                        } else
-                                dev_dbg(lnw->dev,
-                                                "host driver not loaded.\n");
-                        iotg->hsm.a_bus_resume = 0;
-                        langwell_otg_add_ktimer(TB_ASE0_BRST_TMR);
-                }
-                break;
-        case OTG_STATE_B_WAIT_ACON:
-                if (!iotg->hsm.id) {
-                        /* delete hsm timer for b_ase0_brst_tmr */
-                        del_timer_sync(&lnw->hsm_timer);
-                        iotg->otg.default_a = 1;
-                        iotg->hsm.a_srp_det = 0;
-                        langwell_otg_chrg_vbus(0);
-                        langwell_otg_HAAR(0);
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        set_host_mode();
-                        langwell_otg_phy_low_power(1);
-                        iotg->otg.state = OTG_STATE_A_IDLE;
-                        langwell_update_transceiver();
-                } else if (!iotg->hsm.b_sess_vld) {
-                        /* delete hsm timer for b_ase0_brst_tmr */
-                        del_timer_sync(&lnw->hsm_timer);
-                        iotg->hsm.b_hnp_enable = 0;
-                        iotg->hsm.b_bus_req = 0;
-                        langwell_otg_chrg_vbus(0);
-                        langwell_otg_HAAR(0);
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        set_client_mode();
-                        langwell_otg_phy_low_power(1);
-                        iotg->otg.state = OTG_STATE_B_IDLE;
-                } else if (iotg->hsm.a_conn) {
-                        /* delete hsm timer for b_ase0_brst_tmr */
-                        del_timer_sync(&lnw->hsm_timer);
-                        langwell_otg_HAAR(0);
-                        iotg->otg.state = OTG_STATE_B_HOST;
-                        langwell_update_transceiver();
-                } else if (iotg->hsm.a_bus_resume ||
-                                iotg->hsm.b_ase0_brst_tmout) {
-                        /* delete hsm timer for b_ase0_brst_tmr */
-                        del_timer_sync(&lnw->hsm_timer);
-                        langwell_otg_HAAR(0);
-                        langwell_otg_nsf_msg(7);
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        iotg->hsm.a_bus_suspend = 0;
-                        iotg->hsm.b_bus_req = 0;
-                        if (lnw->iotg.start_peripheral)
-                                lnw->iotg.start_peripheral(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "client driver not loaded.\n");
-                        iotg->otg.state = OTG_STATE_B_PERIPHERAL;
-                }
-                break;
-        case OTG_STATE_B_HOST:
-                if (!iotg->hsm.id) {
-                        iotg->otg.default_a = 1;
-                        iotg->hsm.a_srp_det = 0;
-                        langwell_otg_chrg_vbus(0);
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        set_host_mode();
-                        langwell_otg_phy_low_power(1);
-                        iotg->otg.state = OTG_STATE_A_IDLE;
-                        langwell_update_transceiver();
-                } else if (!iotg->hsm.b_sess_vld) {
-                        iotg->hsm.b_hnp_enable = 0;
-                        iotg->hsm.b_bus_req = 0;
-                        langwell_otg_chrg_vbus(0);
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        set_client_mode();
-                        langwell_otg_phy_low_power(1);
-                        iotg->otg.state = OTG_STATE_B_IDLE;
-                } else if ((!iotg->hsm.b_bus_req) ||
-                                (!iotg->hsm.a_conn)) {
-                        iotg->hsm.b_bus_req = 0;
-                        langwell_otg_loc_sof(0);
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        iotg->hsm.a_bus_suspend = 0;
-                        if (lnw->iotg.start_peripheral)
-                                lnw->iotg.start_peripheral(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                                "client driver not loaded.\n");
-                        iotg->otg.state = OTG_STATE_B_PERIPHERAL;
-                }
-                break;
-        case OTG_STATE_A_IDLE:
-                iotg->otg.default_a = 1;
-                if (iotg->hsm.id) {
-                        iotg->otg.default_a = 0;
-                        iotg->hsm.b_bus_req = 0;
-                        iotg->hsm.vbus_srp_up = 0;
-                        langwell_otg_chrg_vbus(0);
-                        set_client_mode();
-                        langwell_otg_phy_low_power(1);
-                        iotg->otg.state = OTG_STATE_B_IDLE;
-                        langwell_update_transceiver();
-                } else if (!iotg->hsm.a_bus_drop &&
-                        (iotg->hsm.a_srp_det || iotg->hsm.a_bus_req)) {
-                        langwell_otg_phy_low_power(0);
-                        /* Turn on VBus */
-                        iotg->otg.set_vbus(&iotg->otg, true);
-                        iotg->hsm.vbus_srp_up = 0;
-                        iotg->hsm.a_wait_vrise_tmout = 0;
-                        langwell_otg_add_timer(a_wait_vrise_tmr);
-                        iotg->otg.state = OTG_STATE_A_WAIT_VRISE;
-                        langwell_update_transceiver();
-                } else if (!iotg->hsm.a_bus_drop && iotg->hsm.a_sess_vld) {
-                        iotg->hsm.vbus_srp_up = 1;
-                } else if (!iotg->hsm.a_sess_vld && iotg->hsm.vbus_srp_up) {
-                        msleep(10);
-                        langwell_otg_phy_low_power(0);
-                        /* Turn on VBus */
-                        iotg->otg.set_vbus(&iotg->otg, true);
-                        iotg->hsm.a_srp_det = 1;
-                        iotg->hsm.vbus_srp_up = 0;
-                        iotg->hsm.a_wait_vrise_tmout = 0;
-                        langwell_otg_add_timer(a_wait_vrise_tmr);
-                        iotg->otg.state = OTG_STATE_A_WAIT_VRISE;
-                        langwell_update_transceiver();
-                } else if (!iotg->hsm.a_sess_vld &&
-                                !iotg->hsm.vbus_srp_up) {
-                        langwell_otg_phy_low_power(1);
-                }
-                break;
-        case OTG_STATE_A_WAIT_VRISE:
-                if (iotg->hsm.id) {
-                        langwell_otg_del_timer(a_wait_vrise_tmr);
-                        iotg->hsm.b_bus_req = 0;
-                        iotg->otg.default_a = 0;
-                        /* Turn off VBus */
-                        iotg->otg.set_vbus(&iotg->otg, false);
-                        set_client_mode();
-                        langwell_otg_phy_low_power_wait(1);
-                        iotg->otg.state = OTG_STATE_B_IDLE;
-                } else if (iotg->hsm.a_vbus_vld) {
-                        langwell_otg_del_timer(a_wait_vrise_tmr);
-                        iotg->hsm.b_conn = 0;
-                        if (lnw->iotg.start_host)
-                                lnw->iotg.start_host(&lnw->iotg);
-                        else {
-                                dev_dbg(lnw->dev, "host driver not loaded.\n");
-                                break;
-                        }
-                        langwell_otg_add_ktimer(TA_WAIT_BCON_TMR);
-                        iotg->otg.state = OTG_STATE_A_WAIT_BCON;
-                } else if (iotg->hsm.a_wait_vrise_tmout) {
-                        iotg->hsm.b_conn = 0;
-                        if (iotg->hsm.a_vbus_vld) {
-                                if (lnw->iotg.start_host)
-                                        lnw->iotg.start_host(&lnw->iotg);
-                                else {
-                                        dev_dbg(lnw->dev,
-                                                "host driver not loaded.\n");
-                                        break;
-                                }
-                                langwell_otg_add_ktimer(TA_WAIT_BCON_TMR);
-                                iotg->otg.state = OTG_STATE_A_WAIT_BCON;
-                        } else {
-                                /* Turn off VBus */
-                                iotg->otg.set_vbus(&iotg->otg, false);
-                                langwell_otg_phy_low_power_wait(1);
-                                iotg->otg.state = OTG_STATE_A_VBUS_ERR;
-                        }
-                }
-                break;
-        case OTG_STATE_A_WAIT_BCON:
-                if (iotg->hsm.id) {
-                        /* delete hsm timer for a_wait_bcon_tmr */
-                        del_timer_sync(&lnw->hsm_timer);
-                        iotg->otg.default_a = 0;
-                        iotg->hsm.b_bus_req = 0;
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        /* Turn off VBus */
-                        iotg->otg.set_vbus(&iotg->otg, false);
-                        set_client_mode();
-                        langwell_otg_phy_low_power_wait(1);
-                        iotg->otg.state = OTG_STATE_B_IDLE;
-                        langwell_update_transceiver();
-                } else if (!iotg->hsm.a_vbus_vld) {
-                        /* delete hsm timer for a_wait_bcon_tmr */
-                        del_timer_sync(&lnw->hsm_timer);
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        /* Turn off VBus */
-                        iotg->otg.set_vbus(&iotg->otg, false);
-                        langwell_otg_phy_low_power_wait(1);
-                        iotg->otg.state = OTG_STATE_A_VBUS_ERR;
-                } else if (iotg->hsm.a_bus_drop ||
-                                (iotg->hsm.a_wait_bcon_tmout &&
-                                !iotg->hsm.a_bus_req)) {
-                        /* delete hsm timer for a_wait_bcon_tmr */
-                        del_timer_sync(&lnw->hsm_timer);
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        /* Turn off VBus */
-                        iotg->otg.set_vbus(&iotg->otg, false);
-                        iotg->otg.state = OTG_STATE_A_WAIT_VFALL;
-                } else if (iotg->hsm.b_conn) {
-                        /* delete hsm timer for a_wait_bcon_tmr */
-                        del_timer_sync(&lnw->hsm_timer);
-                        iotg->hsm.a_suspend_req = 0;
-                        iotg->otg.state = OTG_STATE_A_HOST;
-                        if (iotg->hsm.a_srp_det && iotg->otg.host &&
-                                        !iotg->otg.host->b_hnp_enable) {
-                                /* SRP capable peripheral-only device */
-                                iotg->hsm.a_bus_req = 1;
-                                iotg->hsm.a_srp_det = 0;
-                        } else if (!iotg->hsm.a_bus_req && iotg->otg.host &&
-                                        iotg->otg.host->b_hnp_enable) {
-                                /* It is not safe enough to do a fast
-                                 * transition from A_WAIT_BCON to
-                                 * A_SUSPEND */
-                                msleep(10000);
-                                if (iotg->hsm.a_bus_req)
-                                        break;
-                                if (request_irq(pdev->irq,
-                                        otg_dummy_irq, IRQF_SHARED,
-                                        driver_name, iotg->base) != 0) {
-                                        dev_dbg(lnw->dev,
-                                                "request interrupt %d fail\n",
-                                                pdev->irq);
-                                }
-                                langwell_otg_HABA(1);
-                                iotg->hsm.b_bus_resume = 0;
-                                iotg->hsm.a_aidl_bdis_tmout = 0;
-                                langwell_otg_loc_sof(0);
-                                /* clear PHCD to enable HW timer */
-                                langwell_otg_phy_low_power(0);
-                                langwell_otg_add_timer(a_aidl_bdis_tmr);
-                                iotg->otg.state = OTG_STATE_A_SUSPEND;
-                        } else if (!iotg->hsm.a_bus_req && iotg->otg.host &&
-                                !iotg->otg.host->b_hnp_enable) {
-                                if (lnw->iotg.stop_host)
-                                        lnw->iotg.stop_host(&lnw->iotg);
-                                else
-                                        dev_dbg(lnw->dev,
-                                                "host driver removed.\n");
-                                /* Turn off VBus */
-                                iotg->otg.set_vbus(&iotg->otg, false);
-                                iotg->otg.state = OTG_STATE_A_WAIT_VFALL;
-                        }
-                }
-                break;
-        case OTG_STATE_A_HOST:
-                if (iotg->hsm.id) {
-                        iotg->otg.default_a = 0;
-                        iotg->hsm.b_bus_req = 0;
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        /* Turn off VBus */
-                        iotg->otg.set_vbus(&iotg->otg, false);
-                        set_client_mode();
-                        langwell_otg_phy_low_power_wait(1);
-                        iotg->otg.state = OTG_STATE_B_IDLE;
-                        langwell_update_transceiver();
-                } else if (iotg->hsm.a_bus_drop ||
-                                (iotg->otg.host &&
-                                !iotg->otg.host->b_hnp_enable &&
-                                        !iotg->hsm.a_bus_req)) {
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        /* Turn off VBus */
-                        iotg->otg.set_vbus(&iotg->otg, false);
-                        iotg->otg.state = OTG_STATE_A_WAIT_VFALL;
-                } else if (!iotg->hsm.a_vbus_vld) {
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        /* Turn off VBus */
-                        iotg->otg.set_vbus(&iotg->otg, false);
-                        langwell_otg_phy_low_power_wait(1);
-                        iotg->otg.state = OTG_STATE_A_VBUS_ERR;
-                } else if (iotg->otg.host &&
-                                iotg->otg.host->b_hnp_enable &&
-                                !iotg->hsm.a_bus_req) {
-                        /* Set HABA to enable hardware assistance to signal
-                         *  A-connect after receiver B-disconnect. Hardware
-                         *  will then set client mode and enable URE, SLE and
-                         *  PCE after the assistance. otg_dummy_irq is used to
-                         *  clean these ints when client driver is not resumed.
-                         */
-                        if (request_irq(pdev->irq, otg_dummy_irq, IRQF_SHARED,
-                                        driver_name, iotg->base) != 0) {
-                                dev_dbg(lnw->dev,
-                                        "request interrupt %d failed\n",
-                                                pdev->irq);
-                        }
-                        /* set HABA */
-                        langwell_otg_HABA(1);
-                        iotg->hsm.b_bus_resume = 0;
-                        iotg->hsm.a_aidl_bdis_tmout = 0;
-                        langwell_otg_loc_sof(0);
-                        /* clear PHCD to enable HW timer */
-                        langwell_otg_phy_low_power(0);
-                        langwell_otg_add_timer(a_aidl_bdis_tmr);
-                        iotg->otg.state = OTG_STATE_A_SUSPEND;
-                } else if (!iotg->hsm.b_conn || !iotg->hsm.a_bus_req) {
-                        langwell_otg_add_ktimer(TA_WAIT_BCON_TMR);
-                        iotg->otg.state = OTG_STATE_A_WAIT_BCON;
-                }
-                break;
-        case OTG_STATE_A_SUSPEND:
-                if (iotg->hsm.id) {
-                        langwell_otg_del_timer(a_aidl_bdis_tmr);
-                        langwell_otg_HABA(0);
-                        free_irq(pdev->irq, iotg->base);
-                        iotg->otg.default_a = 0;
-                        iotg->hsm.b_bus_req = 0;
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        /* Turn off VBus */
-                        iotg->otg.set_vbus(&iotg->otg, false);
-                        set_client_mode();
-                        langwell_otg_phy_low_power(1);
-                        iotg->otg.state = OTG_STATE_B_IDLE;
-                        langwell_update_transceiver();
-                } else if (iotg->hsm.a_bus_req ||
-                                iotg->hsm.b_bus_resume) {
-                        langwell_otg_del_timer(a_aidl_bdis_tmr);
-                        langwell_otg_HABA(0);
-                        free_irq(pdev->irq, iotg->base);
-                        iotg->hsm.a_suspend_req = 0;
-                        langwell_otg_loc_sof(1);
-                        iotg->otg.state = OTG_STATE_A_HOST;
-                } else if (iotg->hsm.a_aidl_bdis_tmout ||
-                                iotg->hsm.a_bus_drop) {
-                        langwell_otg_del_timer(a_aidl_bdis_tmr);
-                        langwell_otg_HABA(0);
-                        free_irq(pdev->irq, iotg->base);
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        /* Turn off VBus */
-                        iotg->otg.set_vbus(&iotg->otg, false);
-                        iotg->otg.state = OTG_STATE_A_WAIT_VFALL;
-                } else if (!iotg->hsm.b_conn && iotg->otg.host &&
-                                iotg->otg.host->b_hnp_enable) {
-                        langwell_otg_del_timer(a_aidl_bdis_tmr);
-                        langwell_otg_HABA(0);
-                        free_irq(pdev->irq, iotg->base);
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        iotg->hsm.b_bus_suspend = 0;
-                        iotg->hsm.b_bus_suspend_vld = 0;
-                        /* msleep(200); */
-                        if (lnw->iotg.start_peripheral)
-                                lnw->iotg.start_peripheral(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "client driver not loaded.\n");
-                        langwell_otg_add_ktimer(TB_BUS_SUSPEND_TMR);
-                        iotg->otg.state = OTG_STATE_A_PERIPHERAL;
-                        break;
-                } else if (!iotg->hsm.a_vbus_vld) {
-                        langwell_otg_del_timer(a_aidl_bdis_tmr);
-                        langwell_otg_HABA(0);
-                        free_irq(pdev->irq, iotg->base);
-                        if (lnw->iotg.stop_host)
-                                lnw->iotg.stop_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "host driver has been removed.\n");
-                        /* Turn off VBus */
-                        iotg->otg.set_vbus(&iotg->otg, false);
-                        langwell_otg_phy_low_power_wait(1);
-                        iotg->otg.state = OTG_STATE_A_VBUS_ERR;
-                }
-                break;
-        case OTG_STATE_A_PERIPHERAL:
-                if (iotg->hsm.id) {
-                        /* delete hsm timer for b_bus_suspend_tmr */
-                        del_timer_sync(&lnw->hsm_timer);
-                        iotg->otg.default_a = 0;
-                        iotg->hsm.b_bus_req = 0;
-                        if (lnw->iotg.stop_peripheral)
-                                lnw->iotg.stop_peripheral(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "client driver has been removed.\n");
-                        /* Turn off VBus */
-                        iotg->otg.set_vbus(&iotg->otg, false);
-                        set_client_mode();
-                        langwell_otg_phy_low_power_wait(1);
-                        iotg->otg.state = OTG_STATE_B_IDLE;
-                        langwell_update_transceiver();
-                } else if (!iotg->hsm.a_vbus_vld) {
-                        /* delete hsm timer for b_bus_suspend_tmr */
-                        del_timer_sync(&lnw->hsm_timer);
-                        if (lnw->iotg.stop_peripheral)
-                                lnw->iotg.stop_peripheral(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "client driver has been removed.\n");
-                        /* Turn off VBus */
-                        iotg->otg.set_vbus(&iotg->otg, false);
-                        langwell_otg_phy_low_power_wait(1);
-                        iotg->otg.state = OTG_STATE_A_VBUS_ERR;
-                } else if (iotg->hsm.a_bus_drop) {
-                        /* delete hsm timer for b_bus_suspend_tmr */
-                        del_timer_sync(&lnw->hsm_timer);
-                        if (lnw->iotg.stop_peripheral)
-                                lnw->iotg.stop_peripheral(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "client driver has been removed.\n");
-                        /* Turn off VBus */
-                        iotg->otg.set_vbus(&iotg->otg, false);
-                        iotg->otg.state = OTG_STATE_A_WAIT_VFALL;
-                } else if (iotg->hsm.b_bus_suspend) {
-                        /* delete hsm timer for b_bus_suspend_tmr */
-                        del_timer_sync(&lnw->hsm_timer);
-                        if (lnw->iotg.stop_peripheral)
-                                lnw->iotg.stop_peripheral(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "client driver has been removed.\n");
-                        if (lnw->iotg.start_host)
-                                lnw->iotg.start_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                                "host driver not loaded.\n");
-                        langwell_otg_add_ktimer(TA_WAIT_BCON_TMR);
-                        iotg->otg.state = OTG_STATE_A_WAIT_BCON;
-                } else if (iotg->hsm.b_bus_suspend_tmout) {
-                        u32     val;
-                        val = readl(lnw->iotg.base + CI_PORTSC1);
-                        if (!(val & PORTSC_SUSP))
-                                break;
-                        if (lnw->iotg.stop_peripheral)
-                                lnw->iotg.stop_peripheral(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                        "client driver has been removed.\n");
-                        if (lnw->iotg.start_host)
-                                lnw->iotg.start_host(&lnw->iotg);
-                        else
-                                dev_dbg(lnw->dev,
-                                                "host driver not loaded.\n");
-                        langwell_otg_add_ktimer(TA_WAIT_BCON_TMR);
-                        iotg->otg.state = OTG_STATE_A_WAIT_BCON;
-                }
-                break;
-        case OTG_STATE_A_VBUS_ERR:
-                if (iotg->hsm.id) {
-                        iotg->otg.default_a = 0;
-                        iotg->hsm.a_clr_err = 0;
-                        iotg->hsm.a_srp_det = 0;
-                        set_client_mode();
-                        langwell_otg_phy_low_power(1);
-                        iotg->otg.state = OTG_STATE_B_IDLE;
-                        langwell_update_transceiver();
-                } else if (iotg->hsm.a_clr_err) {
-                        iotg->hsm.a_clr_err = 0;
-                        iotg->hsm.a_srp_det = 0;
-                        reset_otg();
-                        init_hsm();
-                        if (iotg->otg.state == OTG_STATE_A_IDLE)
-                                langwell_update_transceiver();
-                } else {
-                        /* FW will clear PHCD bit when any VBus
-                         * event detected. Reset PHCD to 1 again */
-                        langwell_otg_phy_low_power(1);
-                }
-                break;
-        case OTG_STATE_A_WAIT_VFALL:
-                if (iotg->hsm.id) {
-                        iotg->otg.default_a = 0;
-                        set_client_mode();
-                        langwell_otg_phy_low_power(1);
-                        iotg->otg.state = OTG_STATE_B_IDLE;
-                        langwell_update_transceiver();
-                } else if (iotg->hsm.a_bus_req) {
-                        /* Turn on VBus */
-                        iotg->otg.set_vbus(&iotg->otg, true);
-                        iotg->hsm.a_wait_vrise_tmout = 0;
-                        langwell_otg_add_timer(a_wait_vrise_tmr);
-                        iotg->otg.state = OTG_STATE_A_WAIT_VRISE;
-                } else if (!iotg->hsm.a_sess_vld) {
-                        iotg->hsm.a_srp_det = 0;
-                        set_host_mode();
-                        langwell_otg_phy_low_power(1);
-                        iotg->otg.state = OTG_STATE_A_IDLE;
-                }
-                break;
-        default:
-                ;
-        }
-        dev_dbg(lnw->dev, "%s: new state = %s\n", __func__,
-                        otg_state_string(iotg->otg.state));
-}
-static ssize_t
-show_registers(struct device *_dev, struct device_attribute *attr, char *buf)
-{
-        struct langwell_otg     *lnw = the_transceiver;
-        char                    *next;
-        unsigned                size, t;
-        next = buf;
-        size = PAGE_SIZE;
-        t = scnprintf(next, size,
-                "\n"
-                "USBCMD = 0x%08x\n"
-                "USBSTS = 0x%08x\n"
-                "USBINTR = 0x%08x\n"
-                "ASYNCLISTADDR = 0x%08x\n"
-                "PORTSC1 = 0x%08x\n"
-                "HOSTPC1 = 0x%08x\n"
-                "OTGSC = 0x%08x\n"
-                "USBMODE = 0x%08x\n",
-                readl(lnw->iotg.base + 0x30),
-                readl(lnw->iotg.base + 0x34),
-                readl(lnw->iotg.base + 0x38),
-                readl(lnw->iotg.base + 0x48),
-                readl(lnw->iotg.base + 0x74),
-                readl(lnw->iotg.base + 0xb4),
-                readl(lnw->iotg.base + 0xf4),
-                readl(lnw->iotg.base + 0xf8)
-             );
-        size -= t;
-        next += t;
-        return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
-static ssize_t
-show_hsm(struct device *_dev, struct device_attribute *attr, char *buf)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        struct intel_mid_otg_xceiv      *iotg = &lnw->iotg;
-        char                            *next;
-        unsigned                        size, t;
-        next = buf;
-        size = PAGE_SIZE;
-        if (iotg->otg.host)
-                iotg->hsm.a_set_b_hnp_en = iotg->otg.host->b_hnp_enable;
-        if (iotg->otg.gadget)
-                iotg->hsm.b_hnp_enable = iotg->otg.gadget->b_hnp_enable;
-        t = scnprintf(next, size,
-                "\n"
-                "current state = %s\n"
-                "a_bus_resume = \t%d\n"
-                "a_bus_suspend = \t%d\n"
-                "a_conn = \t%d\n"
-                "a_sess_vld = \t%d\n"
-                "a_srp_det = \t%d\n"
-                "a_vbus_vld = \t%d\n"
-                "b_bus_resume = \t%d\n"
-                "b_bus_suspend = \t%d\n"
-                "b_conn = \t%d\n"
-                "b_se0_srp = \t%d\n"
-                "b_sess_end = \t%d\n"
-                "b_sess_vld = \t%d\n"
-                "id = \t%d\n"
-                "a_set_b_hnp_en = \t%d\n"
-                "b_srp_done = \t%d\n"
-                "b_hnp_enable = \t%d\n"
-                "a_wait_vrise_tmout = \t%d\n"
-                "a_wait_bcon_tmout = \t%d\n"
-                "a_aidl_bdis_tmout = \t%d\n"
-                "b_ase0_brst_tmout = \t%d\n"
-                "a_bus_drop = \t%d\n"
-                "a_bus_req = \t%d\n"
-                "a_clr_err = \t%d\n"
-                "a_suspend_req = \t%d\n"
-                "b_bus_req = \t%d\n"
-                "b_bus_suspend_tmout = \t%d\n"
-                "b_bus_suspend_vld = \t%d\n",
-                otg_state_string(iotg->otg.state),
-                iotg->hsm.a_bus_resume,
-                iotg->hsm.a_bus_suspend,
-                iotg->hsm.a_conn,
-                iotg->hsm.a_sess_vld,
-                iotg->hsm.a_srp_det,
-                iotg->hsm.a_vbus_vld,
-                iotg->hsm.b_bus_resume,
-                iotg->hsm.b_bus_suspend,
-                iotg->hsm.b_conn,
-                iotg->hsm.b_se0_srp,
-                iotg->hsm.b_sess_end,
-                iotg->hsm.b_sess_vld,
-                iotg->hsm.id,
-                iotg->hsm.a_set_b_hnp_en,
-                iotg->hsm.b_srp_done,
-                iotg->hsm.b_hnp_enable,
-                iotg->hsm.a_wait_vrise_tmout,
-                iotg->hsm.a_wait_bcon_tmout,
-                iotg->hsm.a_aidl_bdis_tmout,
-                iotg->hsm.b_ase0_brst_tmout,
-                iotg->hsm.a_bus_drop,
-                iotg->hsm.a_bus_req,
-                iotg->hsm.a_clr_err,
-                iotg->hsm.a_suspend_req,
-                iotg->hsm.b_bus_req,
-                iotg->hsm.b_bus_suspend_tmout,
-                iotg->hsm.b_bus_suspend_vld
-                );
-        size -= t;
-        next += t;
-        return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL);
-static ssize_t
-get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
-        struct langwell_otg     *lnw = the_transceiver;
-        char                    *next;
-        unsigned                size, t;
-        next = buf;
-        size = PAGE_SIZE;
-        t = scnprintf(next, size, "%d", lnw->iotg.hsm.a_bus_req);
-        size -= t;
-        next += t;
-        return PAGE_SIZE - size;
-}
-static ssize_t
-set_a_bus_req(struct device *dev, struct device_attribute *attr,
-                const char *buf, size_t count)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        struct intel_mid_otg_xceiv      *iotg = &lnw->iotg;
-        if (!iotg->otg.default_a)
-                return -1;
-        if (count > 2)
-                return -1;
-        if (buf[0] == '0') {
-                iotg->hsm.a_bus_req = 0;
-                dev_dbg(lnw->dev, "User request: a_bus_req = 0\n");
-        } else if (buf[0] == '1') {
-                /* If a_bus_drop is TRUE, a_bus_req can't be set */
-                if (iotg->hsm.a_bus_drop)
-                        return -1;
-                iotg->hsm.a_bus_req = 1;
-                dev_dbg(lnw->dev, "User request: a_bus_req = 1\n");
-        }
-        if (spin_trylock(&lnw->wq_lock)) {
-                langwell_update_transceiver();
-                spin_unlock(&lnw->wq_lock);
-        }
-        return count;
-}
-static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req);
-static ssize_t
-get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
-{
-        struct langwell_otg     *lnw = the_transceiver;
-        char                    *next;
-        unsigned                size, t;
-        next = buf;
-        size = PAGE_SIZE;
-        t = scnprintf(next, size, "%d", lnw->iotg.hsm.a_bus_drop);
-        size -= t;
-        next += t;
-        return PAGE_SIZE - size;
-}
-static ssize_t
-set_a_bus_drop(struct device *dev, struct device_attribute *attr,
-                const char *buf, size_t count)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        struct intel_mid_otg_xceiv      *iotg = &lnw->iotg;
-        if (!iotg->otg.default_a)
-                return -1;
-        if (count > 2)
-                return -1;
-        if (buf[0] == '0') {
-                iotg->hsm.a_bus_drop = 0;
-                dev_dbg(lnw->dev, "User request: a_bus_drop = 0\n");
-        } else if (buf[0] == '1') {
-                iotg->hsm.a_bus_drop = 1;
-                iotg->hsm.a_bus_req = 0;
-                dev_dbg(lnw->dev, "User request: a_bus_drop = 1\n");
-                dev_dbg(lnw->dev, "User request: and a_bus_req = 0\n");
-        }
-        if (spin_trylock(&lnw->wq_lock)) {
-                langwell_update_transceiver();
-                spin_unlock(&lnw->wq_lock);
-        }
-        return count;
-}
-static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, set_a_bus_drop);
-static ssize_t
-get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
-        struct langwell_otg     *lnw = the_transceiver;
-        char                    *next;
-        unsigned                size, t;
-        next = buf;
-        size = PAGE_SIZE;
-        t = scnprintf(next, size, "%d", lnw->iotg.hsm.b_bus_req);
-        size -= t;
-        next += t;
-        return PAGE_SIZE - size;
-}
-static ssize_t
-set_b_bus_req(struct device *dev, struct device_attribute *attr,
-                const char *buf, size_t count)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        struct intel_mid_otg_xceiv      *iotg = &lnw->iotg;
-        if (iotg->otg.default_a)
-                return -1;
-        if (count > 2)
-                return -1;
-        if (buf[0] == '0') {
-                iotg->hsm.b_bus_req = 0;
-                dev_dbg(lnw->dev, "User request: b_bus_req = 0\n");
-        } else if (buf[0] == '1') {
-                iotg->hsm.b_bus_req = 1;
-                dev_dbg(lnw->dev, "User request: b_bus_req = 1\n");
-        }
-        if (spin_trylock(&lnw->wq_lock)) {
-                langwell_update_transceiver();
-                spin_unlock(&lnw->wq_lock);
-        }
-        return count;
-}
-static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req);
-static ssize_t
-set_a_clr_err(struct device *dev, struct device_attribute *attr,
-                const char *buf, size_t count)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        struct intel_mid_otg_xceiv      *iotg = &lnw->iotg;
-        if (!iotg->otg.default_a)
-                return -1;
-        if (count > 2)
-                return -1;
-        if (buf[0] == '1') {
-                iotg->hsm.a_clr_err = 1;
-                dev_dbg(lnw->dev, "User request: a_clr_err = 1\n");
-        }
-        if (spin_trylock(&lnw->wq_lock)) {
-                langwell_update_transceiver();
-                spin_unlock(&lnw->wq_lock);
-        }
-        return count;
-}
-static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err);
-static struct attribute *inputs_attrs[] = {
-        &dev_attr_a_bus_req.attr,
-        &dev_attr_a_bus_drop.attr,
-        &dev_attr_b_bus_req.attr,
-        &dev_attr_a_clr_err.attr,
-        NULL,
-};
-static struct attribute_group debug_dev_attr_group = {
-        .name = "inputs",
-        .attrs = inputs_attrs,
-};
-static int langwell_otg_probe(struct pci_dev *pdev,
-                const struct pci_device_id *id)
-{
-        unsigned long           resource, len;
-        void __iomem            *base = NULL;
-        int                     retval;
-        u32                     val32;
-        struct langwell_otg     *lnw;
-        char                    qname[] = "langwell_otg_queue";
-        retval = 0;
-        dev_dbg(&pdev->dev, "\notg controller is detected.\n");
-        if (pci_enable_device(pdev) < 0) {
-                retval = -ENODEV;
-                goto done;
-        }
-        lnw = kzalloc(sizeof *lnw, GFP_KERNEL);
-        if (lnw == NULL) {
-                retval = -ENOMEM;
-                goto done;
-        }
-        the_transceiver = lnw;
-        /* control register: BAR 0 */
-        resource = pci_resource_start(pdev, 0);
-        len = pci_resource_len(pdev, 0);
-        if (!request_mem_region(resource, len, driver_name)) {
-                retval = -EBUSY;
-                goto err;
-        }
-        lnw->region = 1;
-        base = ioremap_nocache(resource, len);
-        if (base == NULL) {
-                retval = -EFAULT;
-                goto err;
-        }
-        lnw->iotg.base = base;
-        if (!request_mem_region(USBCFG_ADDR, USBCFG_LEN, driver_name)) {
-                retval = -EBUSY;
-                goto err;
-        }
-        lnw->cfg_region = 1;
-        /* For the SCCB.USBCFG register */
-        base = ioremap_nocache(USBCFG_ADDR, USBCFG_LEN);
-        if (base == NULL) {
-                retval = -EFAULT;
-                goto err;
-        }
-        lnw->usbcfg = base;
-        if (!pdev->irq) {
-                dev_dbg(&pdev->dev, "No IRQ.\n");
-                retval = -ENODEV;
-                goto err;
-        }
-        lnw->qwork = create_singlethread_workqueue(qname);
-        if (!lnw->qwork) {
-                dev_dbg(&pdev->dev, "cannot create workqueue %s\n", qname);
-                retval = -ENOMEM;
-                goto err;
-        }
-        INIT_WORK(&lnw->work, langwell_otg_work);
-        /* OTG common part */
-        lnw->dev = &pdev->dev;
-        lnw->iotg.otg.dev = lnw->dev;
-        lnw->iotg.otg.label = driver_name;
-        lnw->iotg.otg.set_host = langwell_otg_set_host;
-        lnw->iotg.otg.set_peripheral = langwell_otg_set_peripheral;
-        lnw->iotg.otg.set_power = langwell_otg_set_power;
-        lnw->iotg.otg.set_vbus = langwell_otg_set_vbus;
-        lnw->iotg.otg.start_srp = langwell_otg_start_srp;
-        lnw->iotg.otg.state = OTG_STATE_UNDEFINED;
-        if (otg_set_transceiver(&lnw->iotg.otg)) {
-                dev_dbg(lnw->dev, "can't set transceiver\n");
-                retval = -EBUSY;
-                goto err;
-        }
-        reset_otg();
-        init_hsm();
-        spin_lock_init(&lnw->lock);
-        spin_lock_init(&lnw->wq_lock);
-        INIT_LIST_HEAD(&active_timers);
-        retval = langwell_otg_init_timers(&lnw->iotg.hsm);
-        if (retval) {
-                dev_dbg(&pdev->dev, "Failed to init timers\n");
-                goto err;
-        }
-        init_timer(&lnw->hsm_timer);
-        ATOMIC_INIT_NOTIFIER_HEAD(&lnw->iotg.iotg_notifier);
-        lnw->iotg_notifier.notifier_call = langwell_otg_iotg_notify;
-        retval = intel_mid_otg_register_notifier(&lnw->iotg,
-                                                &lnw->iotg_notifier);
-        if (retval) {
-                dev_dbg(lnw->dev, "Failed to register notifier\n");
-                goto err;
-        }
-        if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
-                                driver_name, lnw) != 0) {
-                dev_dbg(lnw->dev, "request interrupt %d failed\n", pdev->irq);
-                retval = -EBUSY;
-                goto err;
-        }
-        /* enable OTGSC int */
-        val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE |
-                OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU;
-        writel(val32, lnw->iotg.base + CI_OTGSC);
-        retval = device_create_file(&pdev->dev, &dev_attr_registers);
-        if (retval < 0) {
-                dev_dbg(lnw->dev,
-                        "Can't register sysfs attribute: %d\n", retval);
-                goto err;
-        }
-        retval = device_create_file(&pdev->dev, &dev_attr_hsm);
-        if (retval < 0) {
-                dev_dbg(lnw->dev, "Can't hsm sysfs attribute: %d\n", retval);
-                goto err;
-        }
-        retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group);
-        if (retval < 0) {
-                dev_dbg(lnw->dev,
-                        "Can't register sysfs attr group: %d\n", retval);
-                goto err;
-        }
-        if (lnw->iotg.otg.state == OTG_STATE_A_IDLE)
-                langwell_update_transceiver();
-        return 0;
-err:
-        if (the_transceiver)
-                langwell_otg_remove(pdev);
-done:
-        return retval;
-}
-static void langwell_otg_remove(struct pci_dev *pdev)
-{
-        struct langwell_otg *lnw = the_transceiver;
-        if (lnw->qwork) {
-                flush_workqueue(lnw->qwork);
-                destroy_workqueue(lnw->qwork);
-        }
-        intel_mid_otg_unregister_notifier(&lnw->iotg, &lnw->iotg_notifier);
-        langwell_otg_free_timers();
-        /* disable OTGSC interrupt as OTGSC doesn't change in reset */
-        writel(0, lnw->iotg.base + CI_OTGSC);
-        if (pdev->irq)
-                free_irq(pdev->irq, lnw);
-        if (lnw->usbcfg)
-                iounmap(lnw->usbcfg);
-        if (lnw->cfg_region)
-                release_mem_region(USBCFG_ADDR, USBCFG_LEN);
-        if (lnw->iotg.base)
-                iounmap(lnw->iotg.base);
-        if (lnw->region)
-                release_mem_region(pci_resource_start(pdev, 0),
-                                pci_resource_len(pdev, 0));
-        otg_set_transceiver(NULL);
-        pci_disable_device(pdev);
-        sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group);
-        device_remove_file(&pdev->dev, &dev_attr_hsm);
-        device_remove_file(&pdev->dev, &dev_attr_registers);
-        kfree(lnw);
-        lnw = NULL;
-}
-static void transceiver_suspend(struct pci_dev *pdev)
-{
-        pci_save_state(pdev);
-        pci_set_power_state(pdev, PCI_D3hot);
-        langwell_otg_phy_low_power(1);
-}
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message)
-{
-        struct langwell_otg             *lnw = the_transceiver;
-        struct intel_mid_otg_xceiv      *iotg = &lnw->iotg;
-        int                             ret = 0;
-        /* Disbale OTG interrupts */
-        langwell_otg_intr(0);
-        if (pdev->irq)
-                free_irq(pdev->irq, lnw);
-        /* Prevent more otg_work */
-        flush_workqueue(lnw->qwork);
-        destroy_workqueue(lnw->qwork);
-        lnw->qwork = NULL;
-        /* start actions */
-        switch (iotg->otg.state) {
-        case OTG_STATE_A_WAIT_VFALL:
-                iotg->otg.state = OTG_STATE_A_IDLE;
-        case OTG_STATE_A_IDLE:
-        case OTG_STATE_B_IDLE:
-        case OTG_STATE_A_VBUS_ERR:
-                transceiver_suspend(pdev);
-                break;
-        case OTG_STATE_A_WAIT_VRISE:
-                langwell_otg_del_timer(a_wait_vrise_tmr);
-                iotg->hsm.a_srp_det = 0;
-                /* Turn off VBus */
-                iotg->otg.set_vbus(&iotg->otg, false);
-                iotg->otg.state = OTG_STATE_A_IDLE;
-                transceiver_suspend(pdev);
-                break;
-        case OTG_STATE_A_WAIT_BCON:
-                del_timer_sync(&lnw->hsm_timer);
-                if (lnw->iotg.stop_host)
-                        lnw->iotg.stop_host(&lnw->iotg);
-                else
-                        dev_dbg(&pdev->dev, "host driver has been removed.\n");
-                iotg->hsm.a_srp_det = 0;
-                /* Turn off VBus */
-                iotg->otg.set_vbus(&iotg->otg, false);
-                iotg->otg.state = OTG_STATE_A_IDLE;
-                transceiver_suspend(pdev);
-                break;
-        case OTG_STATE_A_HOST:
-                if (lnw->iotg.stop_host)
-                        lnw->iotg.stop_host(&lnw->iotg);
-                else
-                        dev_dbg(&pdev->dev, "host driver has been removed.\n");
-                iotg->hsm.a_srp_det = 0;
-                /* Turn off VBus */
-                iotg->otg.set_vbus(&iotg->otg, false);
-                iotg->otg.state = OTG_STATE_A_IDLE;
-                transceiver_suspend(pdev);
-                break;
-        case OTG_STATE_A_SUSPEND:
-                langwell_otg_del_timer(a_aidl_bdis_tmr);
-                langwell_otg_HABA(0);
-                if (lnw->iotg.stop_host)
-                        lnw->iotg.stop_host(&lnw->iotg);
-                else
-                        dev_dbg(lnw->dev, "host driver has been removed.\n");
-                iotg->hsm.a_srp_det = 0;
-                /* Turn off VBus */
-                iotg->otg.set_vbus(&iotg->otg, false);
-                iotg->otg.state = OTG_STATE_A_IDLE;
-                transceiver_suspend(pdev);
-                break;
-        case OTG_STATE_A_PERIPHERAL:
-                del_timer_sync(&lnw->hsm_timer);
-                if (lnw->iotg.stop_peripheral)
-                        lnw->iotg.stop_peripheral(&lnw->iotg);
-                else
-                        dev_dbg(&pdev->dev,
-                                "client driver has been removed.\n");
-                iotg->hsm.a_srp_det = 0;
-                /* Turn off VBus */
-                iotg->otg.set_vbus(&iotg->otg, false);
-                iotg->otg.state = OTG_STATE_A_IDLE;
-                transceiver_suspend(pdev);
-                break;
-        case OTG_STATE_B_HOST:
-                if (lnw->iotg.stop_host)
-                        lnw->iotg.stop_host(&lnw->iotg);
-                else
-                        dev_dbg(&pdev->dev, "host driver has been removed.\n");
-                iotg->hsm.b_bus_req = 0;
-                iotg->otg.state = OTG_STATE_B_IDLE;
-                transceiver_suspend(pdev);
-                break;
-        case OTG_STATE_B_PERIPHERAL:
-                if (lnw->iotg.stop_peripheral)
-                        lnw->iotg.stop_peripheral(&lnw->iotg);
-                else
-                        dev_dbg(&pdev->dev,
-                                "client driver has been removed.\n");
-                iotg->otg.state = OTG_STATE_B_IDLE;
-                transceiver_suspend(pdev);
-                break;
-        case OTG_STATE_B_WAIT_ACON:
-                /* delete hsm timer for b_ase0_brst_tmr */
-                del_timer_sync(&lnw->hsm_timer);
-                langwell_otg_HAAR(0);
-                if (lnw->iotg.stop_host)
-                        lnw->iotg.stop_host(&lnw->iotg);
-                else
-                        dev_dbg(&pdev->dev, "host driver has been removed.\n");
-                iotg->hsm.b_bus_req = 0;
-                iotg->otg.state = OTG_STATE_B_IDLE;
-                transceiver_suspend(pdev);
-                break;
-        default:
-                dev_dbg(lnw->dev, "error state before suspend\n");
-                break;
-        }
-        return ret;
-}
-static void transceiver_resume(struct pci_dev *pdev)
-{
-        pci_restore_state(pdev);
-        pci_set_power_state(pdev, PCI_D0);
-}
-static int langwell_otg_resume(struct pci_dev *pdev)
-{
-        struct langwell_otg     *lnw = the_transceiver;
-        int                     ret = 0;
-        transceiver_resume(pdev);
-        lnw->qwork = create_singlethread_workqueue("langwell_otg_queue");
-        if (!lnw->qwork) {
-                dev_dbg(&pdev->dev, "cannot create langwell otg workqueuen");
-                ret = -ENOMEM;
-                goto error;
-        }
-        if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
-                                driver_name, lnw) != 0) {
-                dev_dbg(&pdev->dev, "request interrupt %d failed\n", pdev->irq);
-                ret = -EBUSY;
-                goto error;
-        }
-        /* enable OTG interrupts */
-        langwell_otg_intr(1);
-        update_hsm();
-        langwell_update_transceiver();
-        return ret;
-error:
-        langwell_otg_intr(0);
-        transceiver_suspend(pdev);
-        return ret;
-}
-static int __init langwell_otg_init(void)
-{
-        return pci_register_driver(&otg_pci_driver);
-}
-module_init(langwell_otg_init);
-static void __exit langwell_otg_cleanup(void)
-{
-        pci_unregister_driver(&otg_pci_driver);
-}
-module_exit(langwell_otg_cleanup);
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
index db0d4fcdc8e2..b5fbe1452ab0 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/otg/mv_otg.c
@@ -202,6 +202,7 @@ static void mv_otg_init_irq(struct mv_otg *mvotg)
 static void mv_otg_start_host(struct mv_otg *mvotg, int on)
 {
+#ifdef CONFIG_USB
        struct otg_transceiver *otg = &mvotg->otg;
        struct usb_hcd *hcd;
@@ -216,6 +217,7 @@ static void mv_otg_start_host(struct mv_otg *mvotg, int on)
                usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
        else
                usb_remove_hcd(hcd);
+#endif /* CONFIG_USB */
 }
 static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on)
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 528691d5f3e2..7542aa94a462 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -425,7 +425,7 @@ static int usbhsg_recip_run_handle(struct usbhs_priv *priv,
        struct usbhs_pipe *pipe;
        int recip = ctrl->bRequestType & USB_RECIP_MASK;
        int nth = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
-        int ret;
+        int ret = 0;
        int (*func)(struct usbhs_priv *priv, struct usbhsg_uep *uep,
                    struct usb_ctrlrequest *ctrl);
        char *msg;
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index fba1147ed916..8dbf51a43c45 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -39,6 +39,8 @@ static void cp210x_get_termios(struct tty_struct *,
        struct usb_serial_port *port);
 static void cp210x_get_termios_port(struct usb_serial_port *port,
        unsigned int *cflagp, unsigned int *baudp);
+static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
+                                                        struct ktermios *);
 static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
                                                        struct ktermios*);
 static int cp210x_tiocmget(struct tty_struct *);
@@ -138,6 +140,7 @@ static const struct usb_device_id id_table[] = {
        { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
        { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
        { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+        { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
        { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
        { } /* Terminating Entry */
 };
@@ -201,6 +204,8 @@ static struct usb_serial_driver cp210x_device = {
 #define CP210X_EMBED_EVENTS     0x15
 #define CP210X_GET_EVENTSTATE   0x16
 #define CP210X_SET_CHARS        0x19
+#define CP210X_GET_BAUDRATE     0x1D
+#define CP210X_SET_BAUDRATE     0x1E
 /* CP210X_IFC_ENABLE */
 #define UART_ENABLE             0x0001
@@ -360,8 +365,8 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port,
 * Quantises the baud rate as per AN205 Table 1
 */
 static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
-        if      (baud <= 56)       baud = 0;
+        if (baud <= 300)
-        else if (baud <= 300)      baud = 300;
+                baud = 300;
        else if (baud <= 600)      baud = 600;
        else if (baud <= 1200)     baud = 1200;
        else if (baud <= 1800)     baud = 1800;
@@ -389,10 +394,10 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
        else if (baud <= 491520)   baud = 460800;
        else if (baud <= 567138)   baud = 500000;
        else if (baud <= 670254)   baud = 576000;
-        else if (baud <= 1053257)  baud = 921600;
+        else if (baud < 1000000)
-        else if (baud <= 1474560)  baud = 1228800;
+                baud = 921600;
-        else if (baud <= 2457600)  baud = 1843200;
+        else if (baud > 2000000)
-        else                       baud = 3686400;
+                baud = 2000000;
        return baud;
 }
@@ -409,13 +414,14 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
                return result;
        }
-        result = usb_serial_generic_open(tty, port);
-        if (result)
-                return result;
        /* Configure the termios structure */
        cp210x_get_termios(tty, port);
-        return 0;
+        /* The baud rate must be initialised on cp2104 */
+        if (tty)
+                cp210x_change_speed(tty, port, NULL);
+        return usb_serial_generic_open(tty, port);
 }
 static void cp210x_close(struct usb_serial_port *port)
@@ -467,10 +473,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
        dbg("%s - port %d", __func__, port->number);
-        cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
+        cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
-        /* Convert to baudrate */
-        if (baud)
-                baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
        dbg("%s - baud rate = %d", __func__, baud);
        *baudp = baud;
@@ -579,11 +582,64 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
        *cflagp = cflag;
 }
+/*
+ * CP2101 supports the following baud rates:
+ *
+ *      300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800,
+ *      38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600
+ *
+ * CP2102 and CP2103 support the following additional rates:
+ *
+ *      4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000,
+ *      576000
+ *
+ * The device will map a requested rate to a supported one, but the result
+ * of requests for rates greater than 1053257 is undefined (see AN205).
+ *
+ * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud,
+ * respectively, with an error less than 1%. The actual rates are determined
+ * by
+ *
+ *      div = round(freq / (2 x prescale x request))
+ *      actual = freq / (2 x prescale x div)
+ *
+ * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps
+ * or 1 otherwise.
+ * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1
+ * otherwise.
+ */
+static void cp210x_change_speed(struct tty_struct *tty,
+                struct usb_serial_port *port, struct ktermios *old_termios)
+{
+        u32 baud;
+        baud = tty->termios->c_ospeed;
+        /* This maps the requested rate to a rate valid on cp2102 or cp2103,
+         * or to an arbitrary rate in [1M,2M].
+         *
+         * NOTE: B0 is not implemented.
+         */
+        baud = cp210x_quantise_baudrate(baud);
+        dbg("%s - setting baud rate to %u", __func__, baud);
+        if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
+                                                        sizeof(baud))) {
+                dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
+                if (old_termios)
+                        baud = old_termios->c_ospeed;
+                else
+                        baud = 9600;
+        }
+        tty_encode_baud_rate(tty, baud, baud);
+}
 static void cp210x_set_termios(struct tty_struct *tty,
                struct usb_serial_port *port, struct ktermios *old_termios)
 {
        unsigned int cflag, old_cflag;
-        unsigned int baud = 0, bits;
+        unsigned int bits;
        unsigned int modem_ctl[4];
        dbg("%s - port %d", __func__, port->number);
@@ -593,20 +649,9 @@ static void cp210x_set_termios(struct tty_struct *tty,
        cflag = tty->termios->c_cflag;
        old_cflag = old_termios->c_cflag;
-        baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
+        if (tty->termios->c_ospeed != old_termios->c_ospeed)
-        /* If the baud rate is to be updated*/
+                cp210x_change_speed(tty, port, old_termios);
-        if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
-                dbg("%s - Setting baud rate to %d baud", __func__,
-                                baud);
-                if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
-                                        ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
-                        dbg("Baud rate requested not supported by device");
-                        baud = tty_termios_baud_rate(old_termios);
-                }
-        }
-        /* Report back the resulting baud rate */
-        tty_encode_baud_rate(tty, baud, baud);
        /* If the number of data bits is to be updated */
        if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 01b6404df395..ad654f8208ef 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -797,6 +797,7 @@ static struct usb_device_id id_table_combined [] = {
                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
        { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+        { USB_DEVICE(HORNBY_VID, HORNBY_ELITE_PID) },
        { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
        { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
@@ -805,6 +806,8 @@ static struct usb_device_id id_table_combined [] = {
        { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
        { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+        { USB_DEVICE(FTDI_VID, TI_XDS100V2_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
        { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
        { USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
        { USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
@@ -841,6 +844,7 @@ static struct usb_device_id id_table_combined [] = {
                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
        { USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
                .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
+        { USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
        { },                                    /* Optional parameter entry */
        { }                                     /* Terminating entry */
 };
@@ -1333,8 +1337,7 @@ static int set_serial_info(struct tty_struct *tty,
                goto check_and_exit;
        }
-        if ((new_serial.baud_base != priv->baud_base) &&
+        if (new_serial.baud_base != priv->baud_base) {
-            (new_serial.baud_base < 9600)) {
                mutex_unlock(&priv->cfg_lock);
                return -EINVAL;
        }
@@ -1824,6 +1827,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
+        struct ktermios dummy;
        struct usb_device *dev = port->serial->dev;
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        int result;
@@ -1842,8 +1846,10 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
           This is same behaviour as serial.c/rs_open() - Kuba */
        /* ftdi_set_termios  will send usb control messages */
-        if (tty)
+        if (tty) {
-                ftdi_set_termios(tty, port, tty->termios);
+                memset(&dummy, 0, sizeof(dummy));
+                ftdi_set_termios(tty, port, &dummy);
+        }
        /* Start reading from the device */
        result = usb_serial_generic_open(tty, port);
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index df1d7da933ec..f994503df2dd 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -39,6 +39,13 @@
 /* www.candapter.com Ewert Energy Systems CANdapter device */
 #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+/*
+ * Texas Instruments XDS100v2 JTAG / BeagleBone A3
+ * http://processors.wiki.ti.com/index.php/XDS100
+ * http://beagleboard.org/bone
+ */
+#define TI_XDS100V2_PID         0xa6d0
 #define FTDI_NXTCAM_PID         0xABB8 /* NXTCam for Mindstorms NXT */
 /* US Interface Navigator (http://www.usinterface.com/) */
@@ -525,6 +532,12 @@
 #define ADI_GNICEPLUS_PID       0xF001
 /*
+ * Hornby Elite
+ */
+#define HORNBY_VID              0x04D8
+#define HORNBY_ELITE_PID        0x000A
+/*
 * RATOC REX-USB60F
 */
 #define RATOC_VENDOR_ID         0x0584
@@ -1168,3 +1181,9 @@
 */
 /* TagTracer MIFARE*/
 #define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID    0xF7C0
+/*
+ * Rainforest Automation
+ */
+/* ZigBee controller */
+#define FTDI_RF_R106            0x8A28
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 65bf06aa591a..5818bfc3261e 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2657,15 +2657,7 @@ cleanup:
 static void edge_disconnect(struct usb_serial *serial)
 {
-        int i;
-        struct edgeport_port *edge_port;
        dbg("%s", __func__);
-        for (i = 0; i < serial->num_ports; ++i) {
-                edge_port = usb_get_serial_port_data(serial->port[i]);
-                edge_remove_sysfs_attrs(edge_port->port);
-        }
 }
 static void edge_release(struct usb_serial *serial)
@@ -2744,6 +2736,7 @@ static struct usb_serial_driver edgeport_1port_device = {
        .disconnect             = edge_disconnect,
        .release                = edge_release,
        .port_probe             = edge_create_sysfs_attrs,
+        .port_remove            = edge_remove_sysfs_attrs,
        .ioctl                  = edge_ioctl,
        .set_termios            = edge_set_termios,
        .tiocmget               = edge_tiocmget,
@@ -2775,6 +2768,7 @@ static struct usb_serial_driver edgeport_2port_device = {
        .disconnect             = edge_disconnect,
        .release                = edge_release,
        .port_probe             = edge_create_sysfs_attrs,
+        .port_remove            = edge_remove_sysfs_attrs,
        .ioctl                  = edge_ioctl,
        .set_termios            = edge_set_termios,
        .tiocmget               = edge_tiocmget,
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 5d3beeeb5fd9..a92a3efb507b 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -38,7 +38,7 @@
 #include <linux/ioctl.h>
 #include "kobil_sct.h"
-static int debug;
+static bool debug;
 /* Version Information */
 #define DRIVER_VERSION "21/05/2004"
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 420d9857394a..ea126a4490cd 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -480,6 +480,10 @@ static void option_instat_callback(struct urb *urb);
 #define ZD_VENDOR_ID                            0x0685
 #define ZD_PRODUCT_7000                         0x7000
+/* LG products */
+#define LG_VENDOR_ID                            0x1004
+#define LG_PRODUCT_L02C                         0x618f
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
                OPTION_BLACKLIST_NONE = 0,
@@ -1183,6 +1187,7 @@ static const struct usb_device_id option_ids[] = {
        { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
        { USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
        { USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
+        { USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
        { } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 30b73e68a904..a34819884c1a 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -36,6 +36,7 @@
 #define UTSTARCOM_PRODUCT_UM175_V1              0x3712
 #define UTSTARCOM_PRODUCT_UM175_V2              0x3714
 #define UTSTARCOM_PRODUCT_UM175_ALLTEL          0x3715
+#define PANTECH_PRODUCT_UML190_VZW              0x3716
 #define PANTECH_PRODUCT_UML290_VZW              0x3718
 /* CMOTECH devices */
@@ -67,7 +68,11 @@ static struct usb_device_id id_table[] = {
        { USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
        { USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
        { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
-        { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) },  /* NMEA */
+        { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) },  /* WMC */
+        { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },  /* DIAG */
        { },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 1f62723ef1a8..d32f72061c09 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -789,7 +789,7 @@ static void rts51x_suspend_timer_fn(unsigned long data)
                        rts51x_set_stat(chip, RTS51X_STAT_SS);
                        /* ignore mass storage interface's children */
                        pm_suspend_ignore_children(&us->pusb_intf->dev, true);
-                        usb_autopm_put_interface(us->pusb_intf);
+                        usb_autopm_put_interface_async(us->pusb_intf);
                        US_DEBUGP("%s: RTS51X_STAT_SS 01,"
                                "intf->pm_usage_cnt:%d, power.usage:%d\n",
                                __func__,
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 8efeae24764f..b4a71679c933 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -27,8 +27,6 @@
 #define USB_SKEL_VENDOR_ID      0xfff0
 #define USB_SKEL_PRODUCT_ID     0xfff0
-static DEFINE_MUTEX(skel_mutex);
 /* table of devices that work with this driver */
 static const struct usb_device_id skel_table[] = {
        { USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) },
@@ -101,25 +99,18 @@ static int skel_open(struct inode *inode, struct file *file)
                goto exit;
        }
-        mutex_lock(&skel_mutex);
        dev = usb_get_intfdata(interface);
        if (!dev) {
-                mutex_unlock(&skel_mutex);
                retval = -ENODEV;
                goto exit;
        }
        /* increment our usage count for the device */
        kref_get(&dev->kref);
-        mutex_unlock(&skel_mutex);
        /* lock the device to allow correctly handling errors
         * in resumption */
        mutex_lock(&dev->io_mutex);
-        if (!dev->interface) {
-                retval = -ENODEV;
-                goto out_err;
-        }
        retval = usb_autopm_get_interface(interface);
        if (retval)
@@ -127,11 +118,7 @@ static int skel_open(struct inode *inode, struct file *file)
        /* save our object in the file's private structure */
        file->private_data = dev;
-out_err:
        mutex_unlock(&dev->io_mutex);
-        if (retval)
-                kref_put(&dev->kref, skel_delete);
 exit:
        return retval;
@@ -611,6 +598,7 @@ static void skel_disconnect(struct usb_interface *interface)
        int minor = interface->minor;
        dev = usb_get_intfdata(interface);
+        usb_set_intfdata(interface, NULL);
        /* give back our minor */
        usb_deregister_dev(interface, &skel_class);
@@ -622,12 +610,8 @@ static void skel_disconnect(struct usb_interface *interface)
        usb_kill_anchored_urbs(&dev->submitted);
-        mutex_lock(&skel_mutex);
-        usb_set_intfdata(interface, NULL);
        /* decrement our usage count */
        kref_put(&dev->kref, skel_delete);
-        mutex_unlock(&skel_mutex);
        dev_info(&interface->dev, "USB Skeleton #%d now disconnected", minor);
 }
diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig
index 0ead8826ec79..f29fdd7f6d75 100644
--- a/drivers/usb/wusbcore/Kconfig
+++ b/drivers/usb/wusbcore/Kconfig
@@ -6,7 +6,7 @@ config USB_WUSB
        depends on EXPERIMENTAL
        depends on USB
        depends on PCI
-        select UWB
+        depends on UWB
        select CRYPTO
        select CRYPTO_BLKCIPHER
        select CRYPTO_CBC
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 79e1b292c030..5aa43c3392a2 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -35,7 +35,7 @@
 #define virtio_rmb(vq) \
        do { if ((vq)->weak_barriers) smp_rmb(); else rmb(); } while(0)
 #define virtio_wmb(vq) \
-        do { if ((vq)->weak_barriers) smp_rmb(); else rmb(); } while(0)
+        do { if ((vq)->weak_barriers) smp_wmb(); else wmb(); } while(0)
 #else
 /* We must force memory ordering even if guest is UP since host could be
 * running on another CPU, but SMP barriers are defined to barrier() in that
@@ -308,9 +308,9 @@ bool virtqueue_kick_prepare(struct virtqueue *_vq)
        bool needs_kick;
        START_USE(vq);
-        /* Descriptors and available array need to be set before we expose the
+        /* We need to expose available array entries before checking avail
-         * new available array entries. */
+         * event. */
-        virtio_wmb(vq);
+        virtio_mb(vq);
        old = vq->vring.avail->idx - vq->num_added;
        new = vq->vring.avail->idx;
diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
index 1b0e3dd81c1a..63d7b58f1c7d 100644
--- a/drivers/watchdog/dw_wdt.c
+++ b/drivers/watchdog/dw_wdt.c
@@ -300,11 +300,7 @@ static int __devinit dw_wdt_drv_probe(struct platform_device *pdev)
        if (!mem)
                return -EINVAL;
-        if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem),
+        dw_wdt.regs = devm_request_and_ioremap(&pdev->dev, mem);
-                                     "dw_wdt"))
-                return -ENOMEM;
-        dw_wdt.regs = devm_ioremap(&pdev->dev, mem->start, resource_size(mem));
        if (!dw_wdt.regs)
                return -ENOMEM;
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 99796c5d913d..bdf401b240b5 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -36,6 +36,7 @@
 *      document number TBD                   : Patsburg (PBG)
 *      document number TBD                   : DH89xxCC
 *      document number TBD                   : Panther Point
+ *      document number TBD                   : Lynx Point
 */
 /*
@@ -126,6 +127,7 @@ enum iTCO_chipsets {
        TCO_PBG,        /* Patsburg */
        TCO_DH89XXCC,   /* DH89xxCC */
        TCO_PPT,        /* Panther Point */
+        TCO_LPT,        /* Lynx Point */
 };
 static struct {
@@ -189,6 +191,7 @@ static struct {
        {"Patsburg", 2},
        {"DH89xxCC", 2},
        {"Panther Point", 2},
+        {"Lynx Point", 2},
        {NULL, 0}
 };
@@ -331,6 +334,38 @@ static DEFINE_PCI_DEVICE_TABLE(iTCO_wdt_pci_tbl) = {
        { PCI_VDEVICE(INTEL, 0x1e5d), TCO_PPT},
        { PCI_VDEVICE(INTEL, 0x1e5e), TCO_PPT},
        { PCI_VDEVICE(INTEL, 0x1e5f), TCO_PPT},
+        { PCI_VDEVICE(INTEL, 0x8c40), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c41), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c42), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c43), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c44), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c45), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c46), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c47), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c48), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c49), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c4a), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c4b), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c4c), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c4d), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c4e), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c4f), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c50), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c51), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c52), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c53), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c54), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c55), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c56), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c57), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c58), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c59), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c5a), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c5b), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c5c), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c5d), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c5e), TCO_LPT},
+        { PCI_VDEVICE(INTEL, 0x8c5f), TCO_LPT},
        { 0, },                 /* End of list */
 };
 MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index b8ef2c6dca7c..c44c3334003a 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -247,7 +247,6 @@ static struct miscdevice imx2_wdt_miscdev = {
 static int __init imx2_wdt_probe(struct platform_device *pdev)
 {
        int ret;
-        int res_size;
        struct resource *res;
        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -256,15 +255,7 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
                return -ENODEV;
        }
-        res_size = resource_size(res);
+        imx2_wdt.base = devm_request_and_ioremap(&pdev->dev, res);
-        if (!devm_request_mem_region(&pdev->dev, res->start, res_size,
-                res->name)) {
-                dev_err(&pdev->dev, "can't allocate %d bytes at %d address\n",
-                        res_size, res->start);
-                return -ENOMEM;
-        }
-        imx2_wdt.base = devm_ioremap_nocache(&pdev->dev, res->start, res_size);
        if (!imx2_wdt.base) {
                dev_err(&pdev->dev, "ioremap failed\n");
                return -ENOMEM;
diff --git a/drivers/watchdog/nuc900_wdt.c b/drivers/watchdog/nuc900_wdt.c
index 50359bad9177..529085b8b8fb 100644
--- a/drivers/watchdog/nuc900_wdt.c
+++ b/drivers/watchdog/nuc900_wdt.c
@@ -72,7 +72,7 @@ struct nuc900_wdt {
 };
 static unsigned long nuc900wdt_busy;
-struct nuc900_wdt *nuc900_wdt;
+static struct nuc900_wdt *nuc900_wdt;
 static inline void nuc900_wdt_keepalive(void)
 {
@@ -287,7 +287,8 @@ static int __devinit nuc900wdt_probe(struct platform_device *pdev)
        setup_timer(&nuc900_wdt->timer, nuc900_wdt_timer_ping, 0);
-        if (misc_register(&nuc900wdt_miscdev)) {
+        ret = misc_register(&nuc900wdt_miscdev);
+        if (ret) {
                dev_err(&pdev->dev, "err register miscdev on minor=%d (%d)\n",
                        WATCHDOG_MINOR, ret);
                goto err_clk;
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 4b33e3fd726b..d19ff5145e82 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -339,6 +339,7 @@ static int __devinit omap_wdt_probe(struct platform_device *pdev)
        return 0;
 err_misc:
+        pm_runtime_disable(wdev->dev);
        platform_set_drvdata(pdev, NULL);
        iounmap(wdev->base);
@@ -371,6 +372,7 @@ static int __devexit omap_wdt_remove(struct platform_device *pdev)
        struct omap_wdt_dev *wdev = platform_get_drvdata(pdev);
        struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        pm_runtime_disable(wdev->dev);
        if (!res)
                return -ENOENT;
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index bd143c9dd3e6..8e210aafdfd0 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -226,7 +226,7 @@ static long pnx4008_wdt_ioctl(struct file *file, unsigned int cmd,
 static int pnx4008_wdt_release(struct inode *inode, struct file *file)
 {
        if (!test_bit(WDT_OK_TO_CLOSE, &wdt_status))
-                printk(KERN_WARNING "WATCHDOG: Device closed unexpectdly\n");
+                printk(KERN_WARNING "WATCHDOG: Device closed unexpectedly\n");
        wdt_disable();
        clk_disable(wdt_clk);
diff --git a/drivers/watchdog/stmp3xxx_wdt.c b/drivers/watchdog/stmp3xxx_wdt.c
index 4c2a4e8698f9..e37d81178b9e 100644
--- a/drivers/watchdog/stmp3xxx_wdt.c
+++ b/drivers/watchdog/stmp3xxx_wdt.c
@@ -174,7 +174,7 @@ static int stmp3xxx_wdt_release(struct inode *inode, struct file *file)
        if (!nowayout) {
                if (!test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
                        wdt_ping();
-                        pr_debug("%s: Device closed unexpectdly\n", __func__);
+                        pr_debug("%s: Device closed unexpectedly\n", __func__);
                        ret = -EINVAL;
                } else {
                        wdt_disable();
diff --git a/drivers/watchdog/via_wdt.c b/drivers/watchdog/via_wdt.c
index 026b4bbfa0aa..8f07dd4bd94a 100644
--- a/drivers/watchdog/via_wdt.c
+++ b/drivers/watchdog/via_wdt.c
@@ -124,8 +124,6 @@ static int wdt_stop(struct watchdog_device *wdd)
 static int wdt_set_timeout(struct watchdog_device *wdd,
                           unsigned int new_timeout)
 {
-        if (new_timeout < 1 || new_timeout > WDT_TIMEOUT_MAX)
-                return -EINVAL;
        writel(new_timeout, wdt_mem + VIA_WDT_COUNT);
        timeout = new_timeout;
        return 0;
@@ -150,6 +148,8 @@ static const struct watchdog_ops wdt_ops = {
 static struct watchdog_device wdt_dev = {
        .info =         &wdt_info,
        .ops =          &wdt_ops,
+        .min_timeout =  1,
+        .max_timeout =  WDT_TIMEOUT_MAX,
 };
 static int __devinit wdt_probe(struct pci_dev *pdev,
@@ -233,7 +233,7 @@ static void __devexit wdt_remove(struct pci_dev *pdev)
        pci_disable_device(pdev);
 }
-DEFINE_PCI_DEVICE_TABLE(wdt_pci_table) = {
+static DEFINE_PCI_DEVICE_TABLE(wdt_pci_table) = {
        { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700) },
        { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800) },
        { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855) },
diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c
index 42e940c23891..c3c3188c34d7 100644
--- a/drivers/watchdog/wafer5823wdt.c
+++ b/drivers/watchdog/wafer5823wdt.c
@@ -152,12 +152,12 @@ static long wafwdt_ioctl(struct file *file, unsigned int cmd,
                        return -EFAULT;
                if (options & WDIOS_DISABLECARD) {
-                        wafwdt_start();
+                        wafwdt_stop();
                        retval = 0;
                }
                if (options & WDIOS_ENABLECARD) {
-                        wafwdt_stop();
+                        wafwdt_start();
                        retval = 0;
                }
diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c
index 909c78650d3e..5d7113c7e501 100644
--- a/drivers/watchdog/wm8350_wdt.c
+++ b/drivers/watchdog/wm8350_wdt.c
@@ -212,10 +212,10 @@ static long wm8350_wdt_ioctl(struct file *file, unsigned int cmd,
                /* Setting both simultaneously means at least one must fail */
                if (options == WDIOS_DISABLECARD)
-                        ret = wm8350_wdt_start(wm8350);
+                        ret = wm8350_wdt_stop(wm8350);
                if (options == WDIOS_ENABLECARD)
-                        ret = wm8350_wdt_stop(wm8350);
+                        ret = wm8350_wdt_start(wm8350);
                break;
        }
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index 1cd94daa71db..b4d4eac761db 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -948,9 +948,12 @@ static void gnttab_request_version(void)
        int rc;
        struct gnttab_set_version gsv;
-        gsv.version = 2;
+        if (xen_hvm_domain())
+                gsv.version = 1;
+        else
+                gsv.version = 2;
        rc = HYPERVISOR_grant_table_op(GNTTABOP_set_version, &gsv, 1);
-        if (rc == 0) {
+        if (rc == 0 && gsv.version == 2) {
                grant_table_version = 2;
                gnttab_interface = &gnttab_v2_ops;
        } else if (grant_table_version == 2) {