diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/ide/arm/icside.c | 2 | ||||
-rw-r--r-- | drivers/ide/cris/ide-cris.c | 2 | ||||
-rw-r--r-- | drivers/ide/ide-dma.c | 74 | ||||
-rw-r--r-- | drivers/ide/ide-iops.c | 2 | ||||
-rw-r--r-- | drivers/ide/ide-lib.c | 125 | ||||
-rw-r--r-- | drivers/ide/ide.c | 1 | ||||
-rw-r--r-- | drivers/ide/pci/aec62xx.c | 32 | ||||
-rw-r--r-- | drivers/ide/pci/alim15x3.c | 76 | ||||
-rw-r--r-- | drivers/ide/pci/atiixp.c | 20 | ||||
-rw-r--r-- | drivers/ide/pci/cmd64x.c | 65 | ||||
-rw-r--r-- | drivers/ide/pci/cs5535.c | 20 | ||||
-rw-r--r-- | drivers/ide/pci/hpt34x.c | 9 | ||||
-rw-r--r-- | drivers/ide/pci/hpt366.c | 67 | ||||
-rw-r--r-- | drivers/ide/pci/it8213.c | 20 | ||||
-rw-r--r-- | drivers/ide/pci/it821x.c | 20 | ||||
-rw-r--r-- | drivers/ide/pci/jmicron.c | 21 | ||||
-rw-r--r-- | drivers/ide/pci/pdc202xx_new.c | 14 | ||||
-rw-r--r-- | drivers/ide/pci/pdc202xx_old.c | 27 | ||||
-rw-r--r-- | drivers/ide/pci/piix.c | 66 | ||||
-rw-r--r-- | drivers/ide/pci/scc_pata.c | 21 | ||||
-rw-r--r-- | drivers/ide/pci/serverworks.c | 31 | ||||
-rw-r--r-- | drivers/ide/pci/siimage.c | 45 | ||||
-rw-r--r-- | drivers/ide/pci/sis5513.c | 14 | ||||
-rw-r--r-- | drivers/ide/pci/slc90e66.c | 13 | ||||
-rw-r--r-- | drivers/ide/pci/tc86c001.c | 9 | ||||
-rw-r--r-- | drivers/ide/pci/triflex.c | 4 |
26 files changed, 232 insertions, 568 deletions
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index e2953fc1fafb..f383ace2a087 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c | |||
@@ -342,7 +342,7 @@ static int icside_dma_check(ide_drive_t *drive) | |||
342 | * Enable DMA on any drive that has multiword DMA | 342 | * Enable DMA on any drive that has multiword DMA |
343 | */ | 343 | */ |
344 | if (id->field_valid & 2) { | 344 | if (id->field_valid & 2) { |
345 | xfer_mode = ide_dma_speed(drive, 0); | 345 | xfer_mode = ide_max_dma_mode(drive); |
346 | goto out; | 346 | goto out; |
347 | } | 347 | } |
348 | 348 | ||
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index 5e8efc89255a..9691d089fce8 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c | |||
@@ -1004,7 +1004,7 @@ static int cris_ide_build_dmatable (ide_drive_t *drive) | |||
1004 | 1004 | ||
1005 | static int cris_config_drive_for_dma (ide_drive_t *drive) | 1005 | static int cris_config_drive_for_dma (ide_drive_t *drive) |
1006 | { | 1006 | { |
1007 | u8 speed = ide_dma_speed(drive, 1); | 1007 | u8 speed = ide_max_dma_mode(drive); |
1008 | 1008 | ||
1009 | if (!speed) | 1009 | if (!speed) |
1010 | return 0; | 1010 | return 0; |
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index fd213088b06b..f28fabb791fe 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c | |||
@@ -705,6 +705,80 @@ int ide_use_dma(ide_drive_t *drive) | |||
705 | 705 | ||
706 | EXPORT_SYMBOL_GPL(ide_use_dma); | 706 | EXPORT_SYMBOL_GPL(ide_use_dma); |
707 | 707 | ||
708 | static const u8 xfer_mode_bases[] = { | ||
709 | XFER_UDMA_0, | ||
710 | XFER_MW_DMA_0, | ||
711 | XFER_SW_DMA_0, | ||
712 | }; | ||
713 | |||
714 | static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base) | ||
715 | { | ||
716 | struct hd_driveid *id = drive->id; | ||
717 | ide_hwif_t *hwif = drive->hwif; | ||
718 | unsigned int mask = 0; | ||
719 | |||
720 | switch(base) { | ||
721 | case XFER_UDMA_0: | ||
722 | if ((id->field_valid & 4) == 0) | ||
723 | break; | ||
724 | |||
725 | mask = id->dma_ultra & hwif->ultra_mask; | ||
726 | |||
727 | if (hwif->udma_filter) | ||
728 | mask &= hwif->udma_filter(drive); | ||
729 | |||
730 | if ((mask & 0x78) && (eighty_ninty_three(drive) == 0)) | ||
731 | mask &= 0x07; | ||
732 | break; | ||
733 | case XFER_MW_DMA_0: | ||
734 | mask = id->dma_mword & hwif->mwdma_mask; | ||
735 | break; | ||
736 | case XFER_SW_DMA_0: | ||
737 | mask = id->dma_1word & hwif->swdma_mask; | ||
738 | break; | ||
739 | default: | ||
740 | BUG(); | ||
741 | break; | ||
742 | } | ||
743 | |||
744 | return mask; | ||
745 | } | ||
746 | |||
747 | /** | ||
748 | * ide_max_dma_mode - compute DMA speed | ||
749 | * @drive: IDE device | ||
750 | * | ||
751 | * Checks the drive capabilities and returns the speed to use | ||
752 | * for the DMA transfer. Returns 0 if the drive is incapable | ||
753 | * of DMA transfers. | ||
754 | */ | ||
755 | |||
756 | u8 ide_max_dma_mode(ide_drive_t *drive) | ||
757 | { | ||
758 | ide_hwif_t *hwif = drive->hwif; | ||
759 | unsigned int mask; | ||
760 | int x, i; | ||
761 | u8 mode = 0; | ||
762 | |||
763 | if (drive->media != ide_disk && hwif->atapi_dma == 0) | ||
764 | return 0; | ||
765 | |||
766 | for (i = 0; i < ARRAY_SIZE(xfer_mode_bases); i++) { | ||
767 | mask = ide_get_mode_mask(drive, xfer_mode_bases[i]); | ||
768 | x = fls(mask) - 1; | ||
769 | if (x >= 0) { | ||
770 | mode = xfer_mode_bases[i] + x; | ||
771 | break; | ||
772 | } | ||
773 | } | ||
774 | |||
775 | printk(KERN_DEBUG "%s: selected mode 0x%x\n", drive->name, mode); | ||
776 | |||
777 | return mode; | ||
778 | } | ||
779 | |||
780 | EXPORT_SYMBOL_GPL(ide_max_dma_mode); | ||
781 | |||
708 | void ide_dma_verbose(ide_drive_t *drive) | 782 | void ide_dma_verbose(ide_drive_t *drive) |
709 | { | 783 | { |
710 | struct hd_driveid *id = drive->id; | 784 | struct hd_driveid *id = drive->id; |
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 3caa176b3155..ed6128f6cd98 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c | |||
@@ -592,8 +592,6 @@ u8 eighty_ninty_three (ide_drive_t *drive) | |||
592 | return 1; | 592 | return 1; |
593 | } | 593 | } |
594 | 594 | ||
595 | EXPORT_SYMBOL(eighty_ninty_three); | ||
596 | |||
597 | int ide_ata66_check (ide_drive_t *drive, ide_task_t *args) | 595 | int ide_ata66_check (ide_drive_t *drive, ide_task_t *args) |
598 | { | 596 | { |
599 | if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) && | 597 | if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) && |
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 68719314df3f..4557fc5a3ea3 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c | |||
@@ -69,123 +69,34 @@ char *ide_xfer_verbose (u8 xfer_rate) | |||
69 | EXPORT_SYMBOL(ide_xfer_verbose); | 69 | EXPORT_SYMBOL(ide_xfer_verbose); |
70 | 70 | ||
71 | /** | 71 | /** |
72 | * ide_dma_speed - compute DMA speed | 72 | * ide_rate_filter - filter transfer mode |
73 | * @drive: drive | 73 | * @drive: IDE device |
74 | * @mode: modes available | ||
75 | * | ||
76 | * Checks the drive capabilities and returns the speed to use | ||
77 | * for the DMA transfer. Returns 0 if the drive is incapable | ||
78 | * of DMA transfers. | ||
79 | */ | ||
80 | |||
81 | u8 ide_dma_speed(ide_drive_t *drive, u8 mode) | ||
82 | { | ||
83 | struct hd_driveid *id = drive->id; | ||
84 | ide_hwif_t *hwif = HWIF(drive); | ||
85 | u8 ultra_mask, mwdma_mask, swdma_mask; | ||
86 | u8 speed = 0; | ||
87 | |||
88 | if (drive->media != ide_disk && hwif->atapi_dma == 0) | ||
89 | return 0; | ||
90 | |||
91 | /* Capable of UltraDMA modes? */ | ||
92 | ultra_mask = id->dma_ultra & hwif->ultra_mask; | ||
93 | |||
94 | if (!(id->field_valid & 4)) | ||
95 | mode = 0; /* fallback to MW/SW DMA if no UltraDMA */ | ||
96 | |||
97 | switch (mode) { | ||
98 | case 4: | ||
99 | if (ultra_mask & 0x40) { | ||
100 | speed = XFER_UDMA_6; | ||
101 | break; | ||
102 | } | ||
103 | case 3: | ||
104 | if (ultra_mask & 0x20) { | ||
105 | speed = XFER_UDMA_5; | ||
106 | break; | ||
107 | } | ||
108 | case 2: | ||
109 | if (ultra_mask & 0x10) { | ||
110 | speed = XFER_UDMA_4; | ||
111 | break; | ||
112 | } | ||
113 | if (ultra_mask & 0x08) { | ||
114 | speed = XFER_UDMA_3; | ||
115 | break; | ||
116 | } | ||
117 | case 1: | ||
118 | if (ultra_mask & 0x04) { | ||
119 | speed = XFER_UDMA_2; | ||
120 | break; | ||
121 | } | ||
122 | if (ultra_mask & 0x02) { | ||
123 | speed = XFER_UDMA_1; | ||
124 | break; | ||
125 | } | ||
126 | if (ultra_mask & 0x01) { | ||
127 | speed = XFER_UDMA_0; | ||
128 | break; | ||
129 | } | ||
130 | case 0: | ||
131 | mwdma_mask = id->dma_mword & hwif->mwdma_mask; | ||
132 | |||
133 | if (mwdma_mask & 0x04) { | ||
134 | speed = XFER_MW_DMA_2; | ||
135 | break; | ||
136 | } | ||
137 | if (mwdma_mask & 0x02) { | ||
138 | speed = XFER_MW_DMA_1; | ||
139 | break; | ||
140 | } | ||
141 | if (mwdma_mask & 0x01) { | ||
142 | speed = XFER_MW_DMA_0; | ||
143 | break; | ||
144 | } | ||
145 | |||
146 | swdma_mask = id->dma_1word & hwif->swdma_mask; | ||
147 | |||
148 | if (swdma_mask & 0x04) { | ||
149 | speed = XFER_SW_DMA_2; | ||
150 | break; | ||
151 | } | ||
152 | if (swdma_mask & 0x02) { | ||
153 | speed = XFER_SW_DMA_1; | ||
154 | break; | ||
155 | } | ||
156 | if (swdma_mask & 0x01) { | ||
157 | speed = XFER_SW_DMA_0; | ||
158 | break; | ||
159 | } | ||
160 | } | ||
161 | |||
162 | return speed; | ||
163 | } | ||
164 | EXPORT_SYMBOL(ide_dma_speed); | ||
165 | |||
166 | |||
167 | /** | ||
168 | * ide_rate_filter - return best speed for mode | ||
169 | * @mode: modes available | ||
170 | * @speed: desired speed | 74 | * @speed: desired speed |
171 | * | 75 | * |
172 | * Given the available DMA/UDMA mode this function returns | 76 | * Given the available transfer modes this function returns |
173 | * the best available speed at or below the speed requested. | 77 | * the best available speed at or below the speed requested. |
78 | * | ||
79 | * FIXME: filter also PIO/SWDMA/MWDMA modes | ||
174 | */ | 80 | */ |
175 | 81 | ||
176 | u8 ide_rate_filter (u8 mode, u8 speed) | 82 | u8 ide_rate_filter(ide_drive_t *drive, u8 speed) |
177 | { | 83 | { |
178 | #ifdef CONFIG_BLK_DEV_IDEDMA | 84 | #ifdef CONFIG_BLK_DEV_IDEDMA |
179 | static u8 speed_max[] = { | 85 | ide_hwif_t *hwif = drive->hwif; |
180 | XFER_MW_DMA_2, XFER_UDMA_2, XFER_UDMA_4, | 86 | u8 mask = hwif->ultra_mask, mode = XFER_MW_DMA_2; |
181 | XFER_UDMA_5, XFER_UDMA_6 | 87 | |
182 | }; | 88 | if (hwif->udma_filter) |
89 | mask = hwif->udma_filter(drive); | ||
90 | |||
91 | if ((mask & 0x78) && (eighty_ninty_three(drive) == 0)) | ||
92 | mask &= 0x07; | ||
93 | |||
94 | if (mask) | ||
95 | mode = fls(mask) - 1 + XFER_UDMA_0; | ||
183 | 96 | ||
184 | // printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed); | 97 | // printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed); |
185 | 98 | ||
186 | /* So that we remember to update this if new modes appear */ | 99 | return min(speed, mode); |
187 | BUG_ON(mode > 4); | ||
188 | return min(speed, speed_max[mode]); | ||
189 | #else /* !CONFIG_BLK_DEV_IDEDMA */ | 100 | #else /* !CONFIG_BLK_DEV_IDEDMA */ |
190 | return min(speed, (u8)XFER_PIO_4); | 101 | return min(speed, (u8)XFER_PIO_4); |
191 | #endif /* CONFIG_BLK_DEV_IDEDMA */ | 102 | #endif /* CONFIG_BLK_DEV_IDEDMA */ |
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index c06424fe647b..73f752142f9e 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c | |||
@@ -477,6 +477,7 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) | |||
477 | 477 | ||
478 | hwif->tuneproc = tmp_hwif->tuneproc; | 478 | hwif->tuneproc = tmp_hwif->tuneproc; |
479 | hwif->speedproc = tmp_hwif->speedproc; | 479 | hwif->speedproc = tmp_hwif->speedproc; |
480 | hwif->udma_filter = tmp_hwif->udma_filter; | ||
480 | hwif->selectproc = tmp_hwif->selectproc; | 481 | hwif->selectproc = tmp_hwif->selectproc; |
481 | hwif->reset_poll = tmp_hwif->reset_poll; | 482 | hwif->reset_poll = tmp_hwif->reset_poll; |
482 | hwif->pre_reset = tmp_hwif->pre_reset; | 483 | hwif->pre_reset = tmp_hwif->pre_reset; |
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index abe0b1bb55ff..099539e8c7a3 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c | |||
@@ -87,38 +87,12 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr | |||
87 | return chipset_table->ultra_settings; | 87 | return chipset_table->ultra_settings; |
88 | } | 88 | } |
89 | 89 | ||
90 | static u8 aec62xx_ratemask (ide_drive_t *drive) | ||
91 | { | ||
92 | ide_hwif_t *hwif = HWIF(drive); | ||
93 | u8 mode; | ||
94 | |||
95 | switch(hwif->pci_dev->device) { | ||
96 | case PCI_DEVICE_ID_ARTOP_ATP865: | ||
97 | case PCI_DEVICE_ID_ARTOP_ATP865R: | ||
98 | mode = (inb(hwif->channel ? | ||
99 | hwif->mate->dma_status : | ||
100 | hwif->dma_status) & 0x10) ? 4 : 3; | ||
101 | break; | ||
102 | case PCI_DEVICE_ID_ARTOP_ATP860: | ||
103 | case PCI_DEVICE_ID_ARTOP_ATP860R: | ||
104 | mode = 2; | ||
105 | break; | ||
106 | case PCI_DEVICE_ID_ARTOP_ATP850UF: | ||
107 | default: | ||
108 | return 1; | ||
109 | } | ||
110 | |||
111 | if (!eighty_ninty_three(drive)) | ||
112 | mode = min(mode, (u8)1); | ||
113 | return mode; | ||
114 | } | ||
115 | |||
116 | static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed) | 90 | static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed) |
117 | { | 91 | { |
118 | ide_hwif_t *hwif = HWIF(drive); | 92 | ide_hwif_t *hwif = HWIF(drive); |
119 | struct pci_dev *dev = hwif->pci_dev; | 93 | struct pci_dev *dev = hwif->pci_dev; |
120 | u16 d_conf = 0; | 94 | u16 d_conf = 0; |
121 | u8 speed = ide_rate_filter(aec62xx_ratemask(drive), xferspeed); | 95 | u8 speed = ide_rate_filter(drive, xferspeed); |
122 | u8 ultra = 0, ultra_conf = 0; | 96 | u8 ultra = 0, ultra_conf = 0; |
123 | u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; | 97 | u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; |
124 | unsigned long flags; | 98 | unsigned long flags; |
@@ -145,7 +119,7 @@ static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
145 | { | 119 | { |
146 | ide_hwif_t *hwif = HWIF(drive); | 120 | ide_hwif_t *hwif = HWIF(drive); |
147 | struct pci_dev *dev = hwif->pci_dev; | 121 | struct pci_dev *dev = hwif->pci_dev; |
148 | u8 speed = ide_rate_filter(aec62xx_ratemask(drive), xferspeed); | 122 | u8 speed = ide_rate_filter(drive, xferspeed); |
149 | u8 unit = (drive->select.b.unit & 0x01); | 123 | u8 unit = (drive->select.b.unit & 0x01); |
150 | u8 tmp1 = 0, tmp2 = 0; | 124 | u8 tmp1 = 0, tmp2 = 0; |
151 | u8 ultra = 0, drive_conf = 0, ultra_conf = 0; | 125 | u8 ultra = 0, drive_conf = 0, ultra_conf = 0; |
@@ -183,7 +157,7 @@ static int aec62xx_tune_chipset (ide_drive_t *drive, u8 speed) | |||
183 | 157 | ||
184 | static int config_chipset_for_dma (ide_drive_t *drive) | 158 | static int config_chipset_for_dma (ide_drive_t *drive) |
185 | { | 159 | { |
186 | u8 speed = ide_dma_speed(drive, aec62xx_ratemask(drive)); | 160 | u8 speed = ide_max_dma_mode(drive); |
187 | 161 | ||
188 | if (!(speed)) | 162 | if (!(speed)) |
189 | return 0; | 163 | return 0; |
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 26c27d946c67..76643b626bdd 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c | |||
@@ -378,74 +378,31 @@ static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio) | |||
378 | } | 378 | } |
379 | 379 | ||
380 | /** | 380 | /** |
381 | * ali15x3_can_ultra - check for ultra DMA support | 381 | * ali_udma_filter - compute UDMA mask |
382 | * @drive: drive to do the check | 382 | * @drive: IDE device |
383 | * | 383 | * |
384 | * Check the drive and controller revisions. Return 0 if UDMA is | 384 | * Return available UDMA modes. |
385 | * not available, or 1 if UDMA can be used. The actual rules for | 385 | * |
386 | * the ALi are | 386 | * The actual rules for the ALi are: |
387 | * No UDMA on revisions <= 0x20 | 387 | * No UDMA on revisions <= 0x20 |
388 | * Disk only for revisions < 0xC2 | 388 | * Disk only for revisions < 0xC2 |
389 | * Not WDC drives for revisions < 0xC2 | 389 | * Not WDC drives for revisions < 0xC2 |
390 | * | 390 | * |
391 | * FIXME: WDC ifdef needs to die | 391 | * FIXME: WDC ifdef needs to die |
392 | */ | 392 | */ |
393 | |||
394 | static u8 ali15x3_can_ultra (ide_drive_t *drive) | ||
395 | { | ||
396 | #ifndef CONFIG_WDC_ALI15X3 | ||
397 | struct hd_driveid *id = drive->id; | ||
398 | #endif /* CONFIG_WDC_ALI15X3 */ | ||
399 | |||
400 | if (m5229_revision <= 0x20) { | ||
401 | return 0; | ||
402 | } else if ((m5229_revision < 0xC2) && | ||
403 | #ifndef CONFIG_WDC_ALI15X3 | ||
404 | ((chip_is_1543c_e && strstr(id->model, "WDC ")) || | ||
405 | (drive->media!=ide_disk))) { | ||
406 | #else /* CONFIG_WDC_ALI15X3 */ | ||
407 | (drive->media!=ide_disk)) { | ||
408 | #endif /* CONFIG_WDC_ALI15X3 */ | ||
409 | return 0; | ||
410 | } else { | ||
411 | return 1; | ||
412 | } | ||
413 | } | ||
414 | 393 | ||
415 | /** | 394 | static u8 ali_udma_filter(ide_drive_t *drive) |
416 | * ali15x3_ratemask - generate DMA mode list | ||
417 | * @drive: drive to compute against | ||
418 | * | ||
419 | * Generate a list of the available DMA modes for the drive. | ||
420 | * FIXME: this function contains lots of bogus masking we can dump | ||
421 | * | ||
422 | * Return the highest available mode (UDMA33, UDMA66, UDMA100,..) | ||
423 | */ | ||
424 | |||
425 | static u8 ali15x3_ratemask (ide_drive_t *drive) | ||
426 | { | 395 | { |
427 | u8 mode = 0, can_ultra = ali15x3_can_ultra(drive); | 396 | if (m5229_revision > 0x20 && m5229_revision < 0xC2) { |
428 | 397 | if (drive->media != ide_disk) | |
429 | if (m5229_revision > 0xC4 && can_ultra) { | 398 | return 0; |
430 | mode = 4; | 399 | #ifndef CONFIG_WDC_ALI15X3 |
431 | } else if (m5229_revision == 0xC4 && can_ultra) { | 400 | if (chip_is_1543c_e && strstr(drive->id->model, "WDC ")) |
432 | mode = 3; | 401 | return 0; |
433 | } else if (m5229_revision >= 0xC2 && can_ultra) { | 402 | #endif |
434 | mode = 2; | ||
435 | } else if (can_ultra) { | ||
436 | return 1; | ||
437 | } else { | ||
438 | return 0; | ||
439 | } | 403 | } |
440 | 404 | ||
441 | /* | 405 | return drive->hwif->ultra_mask; |
442 | * If the drive sees no suitable cable then UDMA 33 | ||
443 | * is the highest permitted mode | ||
444 | */ | ||
445 | |||
446 | if (!eighty_ninty_three(drive)) | ||
447 | mode = min(mode, (u8)1); | ||
448 | return mode; | ||
449 | } | 406 | } |
450 | 407 | ||
451 | /** | 408 | /** |
@@ -461,7 +418,7 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
461 | { | 418 | { |
462 | ide_hwif_t *hwif = HWIF(drive); | 419 | ide_hwif_t *hwif = HWIF(drive); |
463 | struct pci_dev *dev = hwif->pci_dev; | 420 | struct pci_dev *dev = hwif->pci_dev; |
464 | u8 speed = ide_rate_filter(ali15x3_ratemask(drive), xferspeed); | 421 | u8 speed = ide_rate_filter(drive, xferspeed); |
465 | u8 speed1 = speed; | 422 | u8 speed1 = speed; |
466 | u8 unit = (drive->select.b.unit & 0x01); | 423 | u8 unit = (drive->select.b.unit & 0x01); |
467 | u8 tmpbyte = 0x00; | 424 | u8 tmpbyte = 0x00; |
@@ -511,7 +468,7 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
511 | 468 | ||
512 | static int config_chipset_for_dma (ide_drive_t *drive) | 469 | static int config_chipset_for_dma (ide_drive_t *drive) |
513 | { | 470 | { |
514 | u8 speed = ide_dma_speed(drive, ali15x3_ratemask(drive)); | 471 | u8 speed = ide_max_dma_mode(drive); |
515 | 472 | ||
516 | if (!(speed)) | 473 | if (!(speed)) |
517 | return 0; | 474 | return 0; |
@@ -771,6 +728,7 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif) | |||
771 | hwif->autodma = 0; | 728 | hwif->autodma = 0; |
772 | hwif->tuneproc = &ali15x3_tune_drive; | 729 | hwif->tuneproc = &ali15x3_tune_drive; |
773 | hwif->speedproc = &ali15x3_tune_chipset; | 730 | hwif->speedproc = &ali15x3_tune_chipset; |
731 | hwif->udma_filter = &ali_udma_filter; | ||
774 | 732 | ||
775 | /* don't use LBA48 DMA on ALi devices before rev 0xC5 */ | 733 | /* don't use LBA48 DMA on ALi devices before rev 0xC5 */ |
776 | hwif->no_lba48_dma = (m5229_revision <= 0xC4) ? 1 : 0; | 734 | hwif->no_lba48_dma = (m5229_revision <= 0xC4) ? 1 : 0; |
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index 2d48af32e3f4..f7e80d6076d7 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c | |||
@@ -49,22 +49,6 @@ static int save_mdma_mode[4]; | |||
49 | static DEFINE_SPINLOCK(atiixp_lock); | 49 | static DEFINE_SPINLOCK(atiixp_lock); |
50 | 50 | ||
51 | /** | 51 | /** |
52 | * atiixp_ratemask - compute rate mask for ATIIXP IDE | ||
53 | * @drive: IDE drive to compute for | ||
54 | * | ||
55 | * Returns the available modes for the ATIIXP IDE controller. | ||
56 | */ | ||
57 | |||
58 | static u8 atiixp_ratemask(ide_drive_t *drive) | ||
59 | { | ||
60 | u8 mode = 3; | ||
61 | |||
62 | if (!eighty_ninty_three(drive)) | ||
63 | mode = min(mode, (u8)1); | ||
64 | return mode; | ||
65 | } | ||
66 | |||
67 | /** | ||
68 | * atiixp_dma_2_pio - return the PIO mode matching DMA | 52 | * atiixp_dma_2_pio - return the PIO mode matching DMA |
69 | * @xfer_rate: transfer speed | 53 | * @xfer_rate: transfer speed |
70 | * | 54 | * |
@@ -189,7 +173,7 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed) | |||
189 | u16 tmp16; | 173 | u16 tmp16; |
190 | u8 speed, pio; | 174 | u8 speed, pio; |
191 | 175 | ||
192 | speed = ide_rate_filter(atiixp_ratemask(drive), xferspeed); | 176 | speed = ide_rate_filter(drive, xferspeed); |
193 | 177 | ||
194 | spin_lock_irqsave(&atiixp_lock, flags); | 178 | spin_lock_irqsave(&atiixp_lock, flags); |
195 | 179 | ||
@@ -233,7 +217,7 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed) | |||
233 | 217 | ||
234 | static int atiixp_config_drive_for_dma(ide_drive_t *drive) | 218 | static int atiixp_config_drive_for_dma(ide_drive_t *drive) |
235 | { | 219 | { |
236 | u8 speed = ide_dma_speed(drive, atiixp_ratemask(drive)); | 220 | u8 speed = ide_max_dma_mode(drive); |
237 | 221 | ||
238 | if (!speed) | 222 | if (!speed) |
239 | return 0; | 223 | return 0; |
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 610c45f7b4e2..19f5ac1f866c 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c | |||
@@ -292,55 +292,6 @@ static void cmd64x_tune_drive (ide_drive_t *drive, u8 pio) | |||
292 | (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); | 292 | (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); |
293 | } | 293 | } |
294 | 294 | ||
295 | static u8 cmd64x_ratemask (ide_drive_t *drive) | ||
296 | { | ||
297 | struct pci_dev *dev = HWIF(drive)->pci_dev; | ||
298 | u8 mode = 0; | ||
299 | |||
300 | switch(dev->device) { | ||
301 | case PCI_DEVICE_ID_CMD_649: | ||
302 | mode = 3; | ||
303 | break; | ||
304 | case PCI_DEVICE_ID_CMD_648: | ||
305 | mode = 2; | ||
306 | break; | ||
307 | case PCI_DEVICE_ID_CMD_643: | ||
308 | return 0; | ||
309 | |||
310 | case PCI_DEVICE_ID_CMD_646: | ||
311 | { | ||
312 | unsigned int class_rev = 0; | ||
313 | pci_read_config_dword(dev, | ||
314 | PCI_CLASS_REVISION, &class_rev); | ||
315 | class_rev &= 0xff; | ||
316 | /* | ||
317 | * UltraDMA only supported on PCI646U and PCI646U2, which | ||
318 | * correspond to revisions 0x03, 0x05 and 0x07 respectively. | ||
319 | * Actually, although the CMD tech support people won't | ||
320 | * tell me the details, the 0x03 revision cannot support | ||
321 | * UDMA correctly without hardware modifications, and even | ||
322 | * then it only works with Quantum disks due to some | ||
323 | * hold time assumptions in the 646U part which are fixed | ||
324 | * in the 646U2. | ||
325 | * | ||
326 | * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. | ||
327 | */ | ||
328 | switch(class_rev) { | ||
329 | case 0x07: | ||
330 | case 0x05: | ||
331 | return 1; | ||
332 | case 0x03: | ||
333 | case 0x01: | ||
334 | default: | ||
335 | return 0; | ||
336 | } | ||
337 | } | ||
338 | } | ||
339 | if (!eighty_ninty_three(drive)) | ||
340 | mode = min(mode, (u8)1); | ||
341 | return mode; | ||
342 | } | ||
343 | |||
344 | static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed) | 295 | static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed) |
345 | { | 296 | { |
346 | ide_hwif_t *hwif = HWIF(drive); | 297 | ide_hwif_t *hwif = HWIF(drive); |
@@ -348,7 +299,7 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed) | |||
348 | u8 unit = drive->dn & 0x01; | 299 | u8 unit = drive->dn & 0x01; |
349 | u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0; | 300 | u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0; |
350 | 301 | ||
351 | speed = ide_rate_filter(cmd64x_ratemask(drive), speed); | 302 | speed = ide_rate_filter(drive, speed); |
352 | 303 | ||
353 | if (speed >= XFER_SW_DMA_0) { | 304 | if (speed >= XFER_SW_DMA_0) { |
354 | (void) pci_read_config_byte(dev, pciU, ®U); | 305 | (void) pci_read_config_byte(dev, pciU, ®U); |
@@ -403,7 +354,7 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed) | |||
403 | 354 | ||
404 | static int config_chipset_for_dma (ide_drive_t *drive) | 355 | static int config_chipset_for_dma (ide_drive_t *drive) |
405 | { | 356 | { |
406 | u8 speed = ide_dma_speed(drive, cmd64x_ratemask(drive)); | 357 | u8 speed = ide_max_dma_mode(drive); |
407 | 358 | ||
408 | if (!speed) | 359 | if (!speed) |
409 | return 0; | 360 | return 0; |
@@ -646,6 +597,18 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) | |||
646 | 597 | ||
647 | hwif->ultra_mask = hwif->cds->udma_mask; | 598 | hwif->ultra_mask = hwif->cds->udma_mask; |
648 | 599 | ||
600 | /* | ||
601 | * UltraDMA only supported on PCI646U and PCI646U2, which | ||
602 | * correspond to revisions 0x03, 0x05 and 0x07 respectively. | ||
603 | * Actually, although the CMD tech support people won't | ||
604 | * tell me the details, the 0x03 revision cannot support | ||
605 | * UDMA correctly without hardware modifications, and even | ||
606 | * then it only works with Quantum disks due to some | ||
607 | * hold time assumptions in the 646U part which are fixed | ||
608 | * in the 646U2. | ||
609 | * | ||
610 | * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. | ||
611 | */ | ||
649 | if (dev->device == PCI_DEVICE_ID_CMD_646 && class_rev < 5) | 612 | if (dev->device == PCI_DEVICE_ID_CMD_646 && class_rev < 5) |
650 | hwif->ultra_mask = 0x00; | 613 | hwif->ultra_mask = 0x00; |
651 | 614 | ||
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index 45f43efbf92c..66a101e470d0 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c | |||
@@ -127,20 +127,6 @@ static void cs5535_set_speed(ide_drive_t *drive, u8 speed) | |||
127 | } | 127 | } |
128 | } | 128 | } |
129 | 129 | ||
130 | static u8 cs5535_ratemask(ide_drive_t *drive) | ||
131 | { | ||
132 | /* eighty93 will return 1 if it's 80core and capable of | ||
133 | exceeding udma2, 0 otherwise. we need ratemask to set | ||
134 | the max speed and if we can > udma2 then we return 2 | ||
135 | which selects speed_max as udma4 which is the 5535's max | ||
136 | speed, and 1 selects udma2 which is the max for 40c */ | ||
137 | if (!eighty_ninty_three(drive)) | ||
138 | return 1; | ||
139 | |||
140 | return 2; | ||
141 | } | ||
142 | |||
143 | |||
144 | /**** | 130 | /**** |
145 | * cs5535_set_drive - Configure the drive to the new speed | 131 | * cs5535_set_drive - Configure the drive to the new speed |
146 | * @drive: Drive to set up | 132 | * @drive: Drive to set up |
@@ -151,7 +137,7 @@ static u8 cs5535_ratemask(ide_drive_t *drive) | |||
151 | */ | 137 | */ |
152 | static int cs5535_set_drive(ide_drive_t *drive, u8 speed) | 138 | static int cs5535_set_drive(ide_drive_t *drive, u8 speed) |
153 | { | 139 | { |
154 | speed = ide_rate_filter(cs5535_ratemask(drive), speed); | 140 | speed = ide_rate_filter(drive, speed); |
155 | ide_config_drive_speed(drive, speed); | 141 | ide_config_drive_speed(drive, speed); |
156 | cs5535_set_speed(drive, speed); | 142 | cs5535_set_speed(drive, speed); |
157 | 143 | ||
@@ -180,9 +166,7 @@ static void cs5535_tuneproc(ide_drive_t *drive, u8 xferspeed) | |||
180 | 166 | ||
181 | static int cs5535_config_drive_for_dma(ide_drive_t *drive) | 167 | static int cs5535_config_drive_for_dma(ide_drive_t *drive) |
182 | { | 168 | { |
183 | u8 speed; | 169 | u8 speed = ide_max_dma_mode(drive); |
184 | |||
185 | speed = ide_dma_speed(drive, cs5535_ratemask(drive)); | ||
186 | 170 | ||
187 | /* If no DMA speed was available then let dma_check hit pio */ | 171 | /* If no DMA speed was available then let dma_check hit pio */ |
188 | if (!speed) { | 172 | if (!speed) { |
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c index 924eaa3a5708..473e1b33dbf7 100644 --- a/drivers/ide/pci/hpt34x.c +++ b/drivers/ide/pci/hpt34x.c | |||
@@ -43,15 +43,10 @@ | |||
43 | 43 | ||
44 | #define HPT343_DEBUG_DRIVE_INFO 0 | 44 | #define HPT343_DEBUG_DRIVE_INFO 0 |
45 | 45 | ||
46 | static u8 hpt34x_ratemask (ide_drive_t *drive) | ||
47 | { | ||
48 | return 1; | ||
49 | } | ||
50 | |||
51 | static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed) | 46 | static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed) |
52 | { | 47 | { |
53 | struct pci_dev *dev = HWIF(drive)->pci_dev; | 48 | struct pci_dev *dev = HWIF(drive)->pci_dev; |
54 | u8 speed = ide_rate_filter(hpt34x_ratemask(drive), xferspeed); | 49 | u8 speed = ide_rate_filter(drive, xferspeed); |
55 | u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0; | 50 | u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0; |
56 | u8 hi_speed, lo_speed; | 51 | u8 hi_speed, lo_speed; |
57 | 52 | ||
@@ -98,7 +93,7 @@ static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio) | |||
98 | 93 | ||
99 | static int config_chipset_for_dma (ide_drive_t *drive) | 94 | static int config_chipset_for_dma (ide_drive_t *drive) |
100 | { | 95 | { |
101 | u8 speed = ide_dma_speed(drive, hpt34x_ratemask(drive)); | 96 | u8 speed = ide_max_dma_mode(drive); |
102 | 97 | ||
103 | if (!(speed)) | 98 | if (!(speed)) |
104 | return 0; | 99 | return 0; |
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index cf9d344d19f8..de5ad9c35dc6 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c | |||
@@ -514,43 +514,31 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list) | |||
514 | return 0; | 514 | return 0; |
515 | } | 515 | } |
516 | 516 | ||
517 | static u8 hpt3xx_ratemask(ide_drive_t *drive) | ||
518 | { | ||
519 | struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev); | ||
520 | u8 mode = info->max_mode; | ||
521 | |||
522 | if (!eighty_ninty_three(drive) && mode) | ||
523 | mode = min(mode, (u8)1); | ||
524 | return mode; | ||
525 | } | ||
526 | |||
527 | /* | 517 | /* |
528 | * Note for the future; the SATA hpt37x we must set | 518 | * Note for the future; the SATA hpt37x we must set |
529 | * either PIO or UDMA modes 0,4,5 | 519 | * either PIO or UDMA modes 0,4,5 |
530 | */ | 520 | */ |
531 | 521 | ||
532 | static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed) | 522 | static u8 hpt3xx_udma_filter(ide_drive_t *drive) |
533 | { | 523 | { |
534 | struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev); | 524 | struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev); |
535 | u8 chip_type = info->chip_type; | 525 | u8 chip_type = info->chip_type; |
536 | u8 mode = hpt3xx_ratemask(drive); | 526 | u8 mode = info->max_mode; |
537 | 527 | u8 mask; | |
538 | if (drive->media != ide_disk) | ||
539 | return min(speed, (u8)XFER_PIO_4); | ||
540 | 528 | ||
541 | switch (mode) { | 529 | switch (mode) { |
542 | case 0x04: | 530 | case 0x04: |
543 | speed = min_t(u8, speed, XFER_UDMA_6); | 531 | mask = 0x7f; |
544 | break; | 532 | break; |
545 | case 0x03: | 533 | case 0x03: |
546 | speed = min_t(u8, speed, XFER_UDMA_5); | 534 | mask = 0x3f; |
547 | if (chip_type >= HPT374) | 535 | if (chip_type >= HPT374) |
548 | break; | 536 | break; |
549 | if (!check_in_drive_list(drive, bad_ata100_5)) | 537 | if (!check_in_drive_list(drive, bad_ata100_5)) |
550 | goto check_bad_ata33; | 538 | goto check_bad_ata33; |
551 | /* fall thru */ | 539 | /* fall thru */ |
552 | case 0x02: | 540 | case 0x02: |
553 | speed = min_t(u8, speed, XFER_UDMA_4); | 541 | mask = 0x1f; |
554 | 542 | ||
555 | /* | 543 | /* |
556 | * CHECK ME, Does this need to be changed to HPT374 ?? | 544 | * CHECK ME, Does this need to be changed to HPT374 ?? |
@@ -561,13 +549,13 @@ static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed) | |||
561 | !check_in_drive_list(drive, bad_ata66_4)) | 549 | !check_in_drive_list(drive, bad_ata66_4)) |
562 | goto check_bad_ata33; | 550 | goto check_bad_ata33; |
563 | 551 | ||
564 | speed = min_t(u8, speed, XFER_UDMA_3); | 552 | mask = 0x0f; |
565 | if (HPT366_ALLOW_ATA66_3 && | 553 | if (HPT366_ALLOW_ATA66_3 && |
566 | !check_in_drive_list(drive, bad_ata66_3)) | 554 | !check_in_drive_list(drive, bad_ata66_3)) |
567 | goto check_bad_ata33; | 555 | goto check_bad_ata33; |
568 | /* fall thru */ | 556 | /* fall thru */ |
569 | case 0x01: | 557 | case 0x01: |
570 | speed = min_t(u8, speed, XFER_UDMA_2); | 558 | mask = 0x07; |
571 | 559 | ||
572 | check_bad_ata33: | 560 | check_bad_ata33: |
573 | if (chip_type >= HPT370A) | 561 | if (chip_type >= HPT370A) |
@@ -577,10 +565,10 @@ static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed) | |||
577 | /* fall thru */ | 565 | /* fall thru */ |
578 | case 0x00: | 566 | case 0x00: |
579 | default: | 567 | default: |
580 | speed = min_t(u8, speed, XFER_MW_DMA_2); | 568 | mask = 0x00; |
581 | break; | 569 | break; |
582 | } | 570 | } |
583 | return speed; | 571 | return mask; |
584 | } | 572 | } |
585 | 573 | ||
586 | static u32 get_speed_setting(u8 speed, struct hpt_info *info) | 574 | static u32 get_speed_setting(u8 speed, struct hpt_info *info) |
@@ -608,12 +596,19 @@ static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed) | |||
608 | ide_hwif_t *hwif = HWIF(drive); | 596 | ide_hwif_t *hwif = HWIF(drive); |
609 | struct pci_dev *dev = hwif->pci_dev; | 597 | struct pci_dev *dev = hwif->pci_dev; |
610 | struct hpt_info *info = pci_get_drvdata(dev); | 598 | struct hpt_info *info = pci_get_drvdata(dev); |
611 | u8 speed = hpt3xx_ratefilter(drive, xferspeed); | 599 | u8 speed = ide_rate_filter(drive, xferspeed); |
612 | u8 itr_addr = drive->dn ? 0x44 : 0x40; | 600 | u8 itr_addr = drive->dn ? 0x44 : 0x40; |
613 | u32 itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 : | ||
614 | (speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff); | ||
615 | u32 new_itr = get_speed_setting(speed, info); | ||
616 | u32 old_itr = 0; | 601 | u32 old_itr = 0; |
602 | u32 itr_mask, new_itr; | ||
603 | |||
604 | /* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */ | ||
605 | if (drive->media != ide_disk) | ||
606 | speed = min_t(u8, speed, XFER_PIO_4); | ||
607 | |||
608 | itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 : | ||
609 | (speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff); | ||
610 | |||
611 | new_itr = get_speed_setting(speed, info); | ||
617 | 612 | ||
618 | /* | 613 | /* |
619 | * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well) | 614 | * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well) |
@@ -633,12 +628,19 @@ static int hpt37x_tune_chipset(ide_drive_t *drive, u8 xferspeed) | |||
633 | ide_hwif_t *hwif = HWIF(drive); | 628 | ide_hwif_t *hwif = HWIF(drive); |
634 | struct pci_dev *dev = hwif->pci_dev; | 629 | struct pci_dev *dev = hwif->pci_dev; |
635 | struct hpt_info *info = pci_get_drvdata(dev); | 630 | struct hpt_info *info = pci_get_drvdata(dev); |
636 | u8 speed = hpt3xx_ratefilter(drive, xferspeed); | 631 | u8 speed = ide_rate_filter(drive, xferspeed); |
637 | u8 itr_addr = 0x40 + (drive->dn * 4); | 632 | u8 itr_addr = 0x40 + (drive->dn * 4); |
638 | u32 itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 : | ||
639 | (speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff); | ||
640 | u32 new_itr = get_speed_setting(speed, info); | ||
641 | u32 old_itr = 0; | 633 | u32 old_itr = 0; |
634 | u32 itr_mask, new_itr; | ||
635 | |||
636 | /* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */ | ||
637 | if (drive->media != ide_disk) | ||
638 | speed = min_t(u8, speed, XFER_PIO_4); | ||
639 | |||
640 | itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 : | ||
641 | (speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff); | ||
642 | |||
643 | new_itr = get_speed_setting(speed, info); | ||
642 | 644 | ||
643 | pci_read_config_dword(dev, itr_addr, &old_itr); | 645 | pci_read_config_dword(dev, itr_addr, &old_itr); |
644 | new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask); | 646 | new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask); |
@@ -676,7 +678,7 @@ static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio) | |||
676 | */ | 678 | */ |
677 | static int config_chipset_for_dma(ide_drive_t *drive) | 679 | static int config_chipset_for_dma(ide_drive_t *drive) |
678 | { | 680 | { |
679 | u8 speed = ide_dma_speed(drive, hpt3xx_ratemask(drive)); | 681 | u8 speed = ide_max_dma_mode(drive); |
680 | 682 | ||
681 | if (!speed) | 683 | if (!speed) |
682 | return 0; | 684 | return 0; |
@@ -1271,6 +1273,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) | |||
1271 | hwif->intrproc = &hpt3xx_intrproc; | 1273 | hwif->intrproc = &hpt3xx_intrproc; |
1272 | hwif->maskproc = &hpt3xx_maskproc; | 1274 | hwif->maskproc = &hpt3xx_maskproc; |
1273 | hwif->busproc = &hpt3xx_busproc; | 1275 | hwif->busproc = &hpt3xx_busproc; |
1276 | hwif->udma_filter = &hpt3xx_udma_filter; | ||
1274 | 1277 | ||
1275 | /* | 1278 | /* |
1276 | * HPT3xxN chips have some complications: | 1279 | * HPT3xxN chips have some complications: |
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c index 424f00bb160d..02b56cb7bb1b 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/pci/it8213.c | |||
@@ -17,22 +17,6 @@ | |||
17 | 17 | ||
18 | #include <asm/io.h> | 18 | #include <asm/io.h> |
19 | 19 | ||
20 | /* | ||
21 | * it8213_ratemask - Compute available modes | ||
22 | * @drive: IDE drive | ||
23 | * | ||
24 | * Compute the available speeds for the devices on the interface. This | ||
25 | * is all modes to ATA133 clipped by drive cable setup. | ||
26 | */ | ||
27 | |||
28 | static u8 it8213_ratemask (ide_drive_t *drive) | ||
29 | { | ||
30 | u8 mode = 4; | ||
31 | if (!eighty_ninty_three(drive)) | ||
32 | mode = min_t(u8, mode, 1); | ||
33 | return mode; | ||
34 | } | ||
35 | |||
36 | /** | 20 | /** |
37 | * it8213_dma_2_pio - return the PIO mode matching DMA | 21 | * it8213_dma_2_pio - return the PIO mode matching DMA |
38 | * @xfer_rate: transfer speed | 22 | * @xfer_rate: transfer speed |
@@ -145,7 +129,7 @@ static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
145 | ide_hwif_t *hwif = HWIF(drive); | 129 | ide_hwif_t *hwif = HWIF(drive); |
146 | struct pci_dev *dev = hwif->pci_dev; | 130 | struct pci_dev *dev = hwif->pci_dev; |
147 | u8 maslave = 0x40; | 131 | u8 maslave = 0x40; |
148 | u8 speed = ide_rate_filter(it8213_ratemask(drive), xferspeed); | 132 | u8 speed = ide_rate_filter(drive, xferspeed); |
149 | int a_speed = 3 << (drive->dn * 4); | 133 | int a_speed = 3 << (drive->dn * 4); |
150 | int u_flag = 1 << drive->dn; | 134 | int u_flag = 1 << drive->dn; |
151 | int v_flag = 0x01 << drive->dn; | 135 | int v_flag = 0x01 << drive->dn; |
@@ -222,7 +206,7 @@ static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
222 | 206 | ||
223 | static int config_chipset_for_dma (ide_drive_t *drive) | 207 | static int config_chipset_for_dma (ide_drive_t *drive) |
224 | { | 208 | { |
225 | u8 speed = ide_dma_speed(drive, it8213_ratemask(drive)); | 209 | u8 speed = ide_max_dma_mode(drive); |
226 | 210 | ||
227 | if (!speed) | 211 | if (!speed) |
228 | return 0; | 212 | return 0; |
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 4e1254813ee0..442f658c6ae7 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c | |||
@@ -229,22 +229,6 @@ static void it821x_clock_strategy(ide_drive_t *drive) | |||
229 | } | 229 | } |
230 | 230 | ||
231 | /** | 231 | /** |
232 | * it821x_ratemask - Compute available modes | ||
233 | * @drive: IDE drive | ||
234 | * | ||
235 | * Compute the available speeds for the devices on the interface. This | ||
236 | * is all modes to ATA133 clipped by drive cable setup. | ||
237 | */ | ||
238 | |||
239 | static u8 it821x_ratemask (ide_drive_t *drive) | ||
240 | { | ||
241 | u8 mode = 4; | ||
242 | if (!eighty_ninty_three(drive)) | ||
243 | mode = min(mode, (u8)1); | ||
244 | return mode; | ||
245 | } | ||
246 | |||
247 | /** | ||
248 | * it821x_tunepio - tune a drive | 232 | * it821x_tunepio - tune a drive |
249 | * @drive: drive to tune | 233 | * @drive: drive to tune |
250 | * @pio: the desired PIO mode | 234 | * @pio: the desired PIO mode |
@@ -438,7 +422,7 @@ static int it821x_tune_chipset (ide_drive_t *drive, byte xferspeed) | |||
438 | 422 | ||
439 | ide_hwif_t *hwif = drive->hwif; | 423 | ide_hwif_t *hwif = drive->hwif; |
440 | struct it821x_dev *itdev = ide_get_hwifdata(hwif); | 424 | struct it821x_dev *itdev = ide_get_hwifdata(hwif); |
441 | u8 speed = ide_rate_filter(it821x_ratemask(drive), xferspeed); | 425 | u8 speed = ide_rate_filter(drive, xferspeed); |
442 | 426 | ||
443 | switch (speed) { | 427 | switch (speed) { |
444 | case XFER_PIO_4: | 428 | case XFER_PIO_4: |
@@ -488,7 +472,7 @@ static int it821x_tune_chipset (ide_drive_t *drive, byte xferspeed) | |||
488 | 472 | ||
489 | static int config_chipset_for_dma (ide_drive_t *drive) | 473 | static int config_chipset_for_dma (ide_drive_t *drive) |
490 | { | 474 | { |
491 | u8 speed = ide_dma_speed(drive, it821x_ratemask(drive)); | 475 | u8 speed = ide_max_dma_mode(drive); |
492 | 476 | ||
493 | if (speed == 0) | 477 | if (speed == 0) |
494 | return 0; | 478 | return 0; |
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c index be4fc96c29e0..dbb3c199cba9 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/pci/jmicron.c | |||
@@ -22,22 +22,6 @@ typedef enum { | |||
22 | } port_type; | 22 | } port_type; |
23 | 23 | ||
24 | /** | 24 | /** |
25 | * jmicron_ratemask - Compute available modes | ||
26 | * @drive: IDE drive | ||
27 | * | ||
28 | * Compute the available speeds for the devices on the interface. This | ||
29 | * is all modes to ATA133 clipped by drive cable setup. | ||
30 | */ | ||
31 | |||
32 | static u8 jmicron_ratemask(ide_drive_t *drive) | ||
33 | { | ||
34 | u8 mode = 4; | ||
35 | if (!eighty_ninty_three(drive)) | ||
36 | mode = min(mode, (u8)1); | ||
37 | return mode; | ||
38 | } | ||
39 | |||
40 | /** | ||
41 | * ata66_jmicron - Cable check | 25 | * ata66_jmicron - Cable check |
42 | * @hwif: IDE port | 26 | * @hwif: IDE port |
43 | * | 27 | * |
@@ -129,8 +113,7 @@ static void config_jmicron_chipset_for_pio (ide_drive_t *drive, byte set_speed) | |||
129 | 113 | ||
130 | static int jmicron_tune_chipset (ide_drive_t *drive, byte xferspeed) | 114 | static int jmicron_tune_chipset (ide_drive_t *drive, byte xferspeed) |
131 | { | 115 | { |
132 | 116 | u8 speed = ide_rate_filter(drive, xferspeed); | |
133 | u8 speed = ide_rate_filter(jmicron_ratemask(drive), xferspeed); | ||
134 | 117 | ||
135 | return ide_config_drive_speed(drive, speed); | 118 | return ide_config_drive_speed(drive, speed); |
136 | } | 119 | } |
@@ -145,7 +128,7 @@ static int jmicron_tune_chipset (ide_drive_t *drive, byte xferspeed) | |||
145 | 128 | ||
146 | static int config_chipset_for_dma (ide_drive_t *drive) | 129 | static int config_chipset_for_dma (ide_drive_t *drive) |
147 | { | 130 | { |
148 | u8 speed = ide_dma_speed(drive, jmicron_ratemask(drive)); | 131 | u8 speed = ide_max_dma_mode(drive); |
149 | 132 | ||
150 | if (!speed) | 133 | if (!speed) |
151 | return 0; | 134 | return 0; |
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index a23853445af9..772ca4007de4 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c | |||
@@ -82,16 +82,6 @@ static u8 max_dma_rate(struct pci_dev *pdev) | |||
82 | return mode; | 82 | return mode; |
83 | } | 83 | } |
84 | 84 | ||
85 | static u8 pdcnew_ratemask(ide_drive_t *drive) | ||
86 | { | ||
87 | u8 mode = max_dma_rate(HWIF(drive)->pci_dev); | ||
88 | |||
89 | if (!eighty_ninty_three(drive)) | ||
90 | mode = min_t(u8, mode, 1); | ||
91 | |||
92 | return mode; | ||
93 | } | ||
94 | |||
95 | /** | 85 | /** |
96 | * get_indexed_reg - Get indexed register | 86 | * get_indexed_reg - Get indexed register |
97 | * @hwif: for the port address | 87 | * @hwif: for the port address |
@@ -164,7 +154,7 @@ static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed) | |||
164 | u8 adj = (drive->dn & 1) ? 0x08 : 0x00; | 154 | u8 adj = (drive->dn & 1) ? 0x08 : 0x00; |
165 | int err; | 155 | int err; |
166 | 156 | ||
167 | speed = ide_rate_filter(pdcnew_ratemask(drive), speed); | 157 | speed = ide_rate_filter(drive, speed); |
168 | 158 | ||
169 | /* | 159 | /* |
170 | * Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will | 160 | * Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will |
@@ -267,7 +257,7 @@ static int config_chipset_for_dma(ide_drive_t *drive) | |||
267 | set_indexed_reg(hwif, 0x13 + adj, tmp | 0x03); | 257 | set_indexed_reg(hwif, 0x13 + adj, tmp | 0x03); |
268 | } | 258 | } |
269 | 259 | ||
270 | speed = ide_dma_speed(drive, pdcnew_ratemask(drive)); | 260 | speed = ide_max_dma_mode(drive); |
271 | 261 | ||
272 | if (!speed) | 262 | if (!speed) |
273 | return 0; | 263 | return 0; |
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index d7a38067fb34..207a6191fac7 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c | |||
@@ -101,35 +101,12 @@ static const char *pdc_quirk_drives[] = { | |||
101 | #define MC1 0x02 /* DMA"C" timing */ | 101 | #define MC1 0x02 /* DMA"C" timing */ |
102 | #define MC0 0x01 /* DMA"C" timing */ | 102 | #define MC0 0x01 /* DMA"C" timing */ |
103 | 103 | ||
104 | static u8 pdc202xx_ratemask (ide_drive_t *drive) | ||
105 | { | ||
106 | u8 mode; | ||
107 | |||
108 | switch(HWIF(drive)->pci_dev->device) { | ||
109 | case PCI_DEVICE_ID_PROMISE_20267: | ||
110 | case PCI_DEVICE_ID_PROMISE_20265: | ||
111 | mode = 3; | ||
112 | break; | ||
113 | case PCI_DEVICE_ID_PROMISE_20263: | ||
114 | case PCI_DEVICE_ID_PROMISE_20262: | ||
115 | mode = 2; | ||
116 | break; | ||
117 | case PCI_DEVICE_ID_PROMISE_20246: | ||
118 | return 1; | ||
119 | default: | ||
120 | return 0; | ||
121 | } | ||
122 | if (!eighty_ninty_three(drive)) | ||
123 | mode = min(mode, (u8)1); | ||
124 | return mode; | ||
125 | } | ||
126 | |||
127 | static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed) | 104 | static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed) |
128 | { | 105 | { |
129 | ide_hwif_t *hwif = HWIF(drive); | 106 | ide_hwif_t *hwif = HWIF(drive); |
130 | struct pci_dev *dev = hwif->pci_dev; | 107 | struct pci_dev *dev = hwif->pci_dev; |
131 | u8 drive_pci = 0x60 + (drive->dn << 2); | 108 | u8 drive_pci = 0x60 + (drive->dn << 2); |
132 | u8 speed = ide_rate_filter(pdc202xx_ratemask(drive), xferspeed); | 109 | u8 speed = ide_rate_filter(drive, xferspeed); |
133 | 110 | ||
134 | u32 drive_conf; | 111 | u32 drive_conf; |
135 | u8 AP, BP, CP, DP; | 112 | u8 AP, BP, CP, DP; |
@@ -308,7 +285,7 @@ chipset_is_set: | |||
308 | if (drive->media == ide_disk) /* PREFETCH_EN */ | 285 | if (drive->media == ide_disk) /* PREFETCH_EN */ |
309 | pci_write_config_byte(dev, (drive_pci), AP|PREFETCH_EN); | 286 | pci_write_config_byte(dev, (drive_pci), AP|PREFETCH_EN); |
310 | 287 | ||
311 | speed = ide_dma_speed(drive, pdc202xx_ratemask(drive)); | 288 | speed = ide_max_dma_mode(drive); |
312 | 289 | ||
313 | if (!(speed)) { | 290 | if (!(speed)) { |
314 | /* restore original pci-config space */ | 291 | /* restore original pci-config space */ |
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index 17ea44edb4eb..84d3938a430a 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c | |||
@@ -106,68 +106,6 @@ | |||
106 | static int no_piix_dma; | 106 | static int no_piix_dma; |
107 | 107 | ||
108 | /** | 108 | /** |
109 | * piix_ratemask - compute rate mask for PIIX IDE | ||
110 | * @drive: IDE drive to compute for | ||
111 | * | ||
112 | * Returns the available modes for the PIIX IDE controller. | ||
113 | */ | ||
114 | |||
115 | static u8 piix_ratemask (ide_drive_t *drive) | ||
116 | { | ||
117 | struct pci_dev *dev = HWIF(drive)->pci_dev; | ||
118 | u8 mode; | ||
119 | |||
120 | switch(dev->device) { | ||
121 | case PCI_DEVICE_ID_INTEL_82801EB_1: | ||
122 | mode = 3; | ||
123 | break; | ||
124 | /* UDMA 100 capable */ | ||
125 | case PCI_DEVICE_ID_INTEL_82801BA_8: | ||
126 | case PCI_DEVICE_ID_INTEL_82801BA_9: | ||
127 | case PCI_DEVICE_ID_INTEL_82801CA_10: | ||
128 | case PCI_DEVICE_ID_INTEL_82801CA_11: | ||
129 | case PCI_DEVICE_ID_INTEL_82801E_11: | ||
130 | case PCI_DEVICE_ID_INTEL_82801DB_1: | ||
131 | case PCI_DEVICE_ID_INTEL_82801DB_10: | ||
132 | case PCI_DEVICE_ID_INTEL_82801DB_11: | ||
133 | case PCI_DEVICE_ID_INTEL_82801EB_11: | ||
134 | case PCI_DEVICE_ID_INTEL_ESB_2: | ||
135 | case PCI_DEVICE_ID_INTEL_ICH6_19: | ||
136 | case PCI_DEVICE_ID_INTEL_ICH7_21: | ||
137 | case PCI_DEVICE_ID_INTEL_ESB2_18: | ||
138 | case PCI_DEVICE_ID_INTEL_ICH8_6: | ||
139 | mode = 3; | ||
140 | break; | ||
141 | /* UDMA 66 capable */ | ||
142 | case PCI_DEVICE_ID_INTEL_82801AA_1: | ||
143 | case PCI_DEVICE_ID_INTEL_82372FB_1: | ||
144 | mode = 2; | ||
145 | break; | ||
146 | /* UDMA 33 capable */ | ||
147 | case PCI_DEVICE_ID_INTEL_82371AB: | ||
148 | case PCI_DEVICE_ID_INTEL_82443MX_1: | ||
149 | case PCI_DEVICE_ID_INTEL_82451NX: | ||
150 | case PCI_DEVICE_ID_INTEL_82801AB_1: | ||
151 | return 1; | ||
152 | /* Non UDMA capable (MWDMA2) */ | ||
153 | case PCI_DEVICE_ID_INTEL_82371SB_1: | ||
154 | case PCI_DEVICE_ID_INTEL_82371FB_1: | ||
155 | case PCI_DEVICE_ID_INTEL_82371FB_0: | ||
156 | case PCI_DEVICE_ID_INTEL_82371MX: | ||
157 | default: | ||
158 | return 0; | ||
159 | } | ||
160 | |||
161 | /* | ||
162 | * If we are UDMA66 capable fall back to UDMA33 | ||
163 | * if the drive cannot see an 80pin cable. | ||
164 | */ | ||
165 | if (!eighty_ninty_three(drive)) | ||
166 | mode = min_t(u8, mode, 1); | ||
167 | return mode; | ||
168 | } | ||
169 | |||
170 | /** | ||
171 | * piix_dma_2_pio - return the PIO mode matching DMA | 109 | * piix_dma_2_pio - return the PIO mode matching DMA |
172 | * @xfer_rate: transfer speed | 110 | * @xfer_rate: transfer speed |
173 | * | 111 | * |
@@ -301,7 +239,7 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
301 | ide_hwif_t *hwif = HWIF(drive); | 239 | ide_hwif_t *hwif = HWIF(drive); |
302 | struct pci_dev *dev = hwif->pci_dev; | 240 | struct pci_dev *dev = hwif->pci_dev; |
303 | u8 maslave = hwif->channel ? 0x42 : 0x40; | 241 | u8 maslave = hwif->channel ? 0x42 : 0x40; |
304 | u8 speed = ide_rate_filter(piix_ratemask(drive), xferspeed); | 242 | u8 speed = ide_rate_filter(drive, xferspeed); |
305 | int a_speed = 3 << (drive->dn * 4); | 243 | int a_speed = 3 << (drive->dn * 4); |
306 | int u_flag = 1 << drive->dn; | 244 | int u_flag = 1 << drive->dn; |
307 | int v_flag = 0x01 << drive->dn; | 245 | int v_flag = 0x01 << drive->dn; |
@@ -376,7 +314,7 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
376 | 314 | ||
377 | static int piix_config_drive_for_dma (ide_drive_t *drive) | 315 | static int piix_config_drive_for_dma (ide_drive_t *drive) |
378 | { | 316 | { |
379 | u8 speed = ide_dma_speed(drive, piix_ratemask(drive)); | 317 | u8 speed = ide_max_dma_mode(drive); |
380 | 318 | ||
381 | /* | 319 | /* |
382 | * If no DMA speed was available or the chipset has DMA bugs | 320 | * If no DMA speed was available or the chipset has DMA bugs |
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index f84bf791f72e..cbf936325355 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c | |||
@@ -190,23 +190,6 @@ scc_ide_outsl(unsigned long port, void *addr, u32 count) | |||
190 | } | 190 | } |
191 | 191 | ||
192 | /** | 192 | /** |
193 | * scc_ratemask - Compute available modes | ||
194 | * @drive: IDE drive | ||
195 | * | ||
196 | * Compute the available speeds for the devices on the interface. | ||
197 | * Enforce UDMA33 as a limit if there is no 80pin cable present. | ||
198 | */ | ||
199 | |||
200 | static u8 scc_ratemask(ide_drive_t *drive) | ||
201 | { | ||
202 | u8 mode = 4; | ||
203 | |||
204 | if (!eighty_ninty_three(drive)) | ||
205 | mode = min(mode, (u8)1); | ||
206 | return mode; | ||
207 | } | ||
208 | |||
209 | /** | ||
210 | * scc_tuneproc - tune a drive PIO mode | 193 | * scc_tuneproc - tune a drive PIO mode |
211 | * @drive: drive to tune | 194 | * @drive: drive to tune |
212 | * @mode_wanted: the target operating mode | 195 | * @mode_wanted: the target operating mode |
@@ -273,7 +256,7 @@ static void scc_tuneproc(ide_drive_t *drive, byte mode_wanted) | |||
273 | static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed) | 256 | static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed) |
274 | { | 257 | { |
275 | ide_hwif_t *hwif = HWIF(drive); | 258 | ide_hwif_t *hwif = HWIF(drive); |
276 | u8 speed = ide_rate_filter(scc_ratemask(drive), xferspeed); | 259 | u8 speed = ide_rate_filter(drive, xferspeed); |
277 | struct scc_ports *ports = ide_get_hwifdata(hwif); | 260 | struct scc_ports *ports = ide_get_hwifdata(hwif); |
278 | unsigned long ctl_base = ports->ctl; | 261 | unsigned long ctl_base = ports->ctl; |
279 | unsigned long cckctrl_port = ctl_base + 0xff0; | 262 | unsigned long cckctrl_port = ctl_base + 0xff0; |
@@ -347,7 +330,7 @@ static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed) | |||
347 | 330 | ||
348 | static int scc_config_chipset_for_dma(ide_drive_t *drive) | 331 | static int scc_config_chipset_for_dma(ide_drive_t *drive) |
349 | { | 332 | { |
350 | u8 speed = ide_dma_speed(drive, scc_ratemask(drive)); | 333 | u8 speed = ide_max_dma_mode(drive); |
351 | 334 | ||
352 | if (!speed) | 335 | if (!speed) |
353 | return 0; | 336 | return 0; |
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index dbcd37a0c652..2fa6d92d16cc 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c | |||
@@ -65,16 +65,16 @@ static int check_in_drive_lists (ide_drive_t *drive, const char **list) | |||
65 | return 0; | 65 | return 0; |
66 | } | 66 | } |
67 | 67 | ||
68 | static u8 svwks_ratemask (ide_drive_t *drive) | 68 | static u8 svwks_udma_filter(ide_drive_t *drive) |
69 | { | 69 | { |
70 | struct pci_dev *dev = HWIF(drive)->pci_dev; | 70 | struct pci_dev *dev = HWIF(drive)->pci_dev; |
71 | u8 mode = 0; | 71 | u8 mask = 0; |
72 | 72 | ||
73 | if (!svwks_revision) | 73 | if (!svwks_revision) |
74 | pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision); | 74 | pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision); |
75 | 75 | ||
76 | if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) | 76 | if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) |
77 | return 2; | 77 | return 0x1f; |
78 | if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { | 78 | if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { |
79 | u32 reg = 0; | 79 | u32 reg = 0; |
80 | if (isa_dev) | 80 | if (isa_dev) |
@@ -86,25 +86,31 @@ static u8 svwks_ratemask (ide_drive_t *drive) | |||
86 | if(drive->media == ide_disk) | 86 | if(drive->media == ide_disk) |
87 | return 0; | 87 | return 0; |
88 | /* Check the OSB4 DMA33 enable bit */ | 88 | /* Check the OSB4 DMA33 enable bit */ |
89 | return ((reg & 0x00004000) == 0x00004000) ? 1 : 0; | 89 | return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0; |
90 | } else if (svwks_revision < SVWKS_CSB5_REVISION_NEW) { | 90 | } else if (svwks_revision < SVWKS_CSB5_REVISION_NEW) { |
91 | return 1; | 91 | return 0x07; |
92 | } else if (svwks_revision >= SVWKS_CSB5_REVISION_NEW) { | 92 | } else if (svwks_revision >= SVWKS_CSB5_REVISION_NEW) { |
93 | u8 btr = 0; | 93 | u8 btr = 0, mode; |
94 | pci_read_config_byte(dev, 0x5A, &btr); | 94 | pci_read_config_byte(dev, 0x5A, &btr); |
95 | mode = btr & 0x3; | 95 | mode = btr & 0x3; |
96 | if (!eighty_ninty_three(drive)) | 96 | |
97 | mode = min(mode, (u8)1); | ||
98 | /* If someone decides to do UDMA133 on CSB5 the same | 97 | /* If someone decides to do UDMA133 on CSB5 the same |
99 | issue will bite so be inclusive */ | 98 | issue will bite so be inclusive */ |
100 | if (mode > 2 && check_in_drive_lists(drive, svwks_bad_ata100)) | 99 | if (mode > 2 && check_in_drive_lists(drive, svwks_bad_ata100)) |
101 | mode = 2; | 100 | mode = 2; |
101 | |||
102 | switch(mode) { | ||
103 | case 2: mask = 0x1f; break; | ||
104 | case 1: mask = 0x07; break; | ||
105 | default: mask = 0x00; break; | ||
106 | } | ||
102 | } | 107 | } |
103 | if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || | 108 | if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || |
104 | (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) && | 109 | (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) && |
105 | (!(PCI_FUNC(dev->devfn) & 1))) | 110 | (!(PCI_FUNC(dev->devfn) & 1))) |
106 | mode = 2; | 111 | mask = 0x1f; |
107 | return mode; | 112 | |
113 | return mask; | ||
108 | } | 114 | } |
109 | 115 | ||
110 | static u8 svwks_csb_check (struct pci_dev *dev) | 116 | static u8 svwks_csb_check (struct pci_dev *dev) |
@@ -141,7 +147,7 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
141 | if (xferspeed == 255) /* PIO auto-tuning */ | 147 | if (xferspeed == 255) /* PIO auto-tuning */ |
142 | speed = XFER_PIO_0 + pio; | 148 | speed = XFER_PIO_0 + pio; |
143 | else | 149 | else |
144 | speed = ide_rate_filter(svwks_ratemask(drive), xferspeed); | 150 | speed = ide_rate_filter(drive, xferspeed); |
145 | 151 | ||
146 | /* If we are about to put a disk into UDMA mode we screwed up. | 152 | /* If we are about to put a disk into UDMA mode we screwed up. |
147 | Our code assumes we never _ever_ do this on an OSB4 */ | 153 | Our code assumes we never _ever_ do this on an OSB4 */ |
@@ -304,7 +310,7 @@ static void svwks_tune_drive (ide_drive_t *drive, u8 pio) | |||
304 | 310 | ||
305 | static int config_chipset_for_dma (ide_drive_t *drive) | 311 | static int config_chipset_for_dma (ide_drive_t *drive) |
306 | { | 312 | { |
307 | u8 speed = ide_dma_speed(drive, svwks_ratemask(drive)); | 313 | u8 speed = ide_max_dma_mode(drive); |
308 | 314 | ||
309 | if (!(speed)) | 315 | if (!(speed)) |
310 | speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); | 316 | speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); |
@@ -500,6 +506,7 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif) | |||
500 | 506 | ||
501 | hwif->tuneproc = &svwks_tune_drive; | 507 | hwif->tuneproc = &svwks_tune_drive; |
502 | hwif->speedproc = &svwks_tune_chipset; | 508 | hwif->speedproc = &svwks_tune_chipset; |
509 | hwif->udma_filter = &svwks_udma_filter; | ||
503 | 510 | ||
504 | hwif->atapi_dma = 1; | 511 | hwif->atapi_dma = 1; |
505 | 512 | ||
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index c0188de3cc66..5314ec913724 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c | |||
@@ -122,45 +122,41 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r) | |||
122 | } | 122 | } |
123 | 123 | ||
124 | /** | 124 | /** |
125 | * siimage_ratemask - Compute available modes | 125 | * sil_udma_filter - compute UDMA mask |
126 | * @drive: IDE drive | 126 | * @drive: IDE device |
127 | * | ||
128 | * Compute the available UDMA speeds for the device on the interface. | ||
127 | * | 129 | * |
128 | * Compute the available speeds for the devices on the interface. | ||
129 | * For the CMD680 this depends on the clocking mode (scsc), for the | 130 | * For the CMD680 this depends on the clocking mode (scsc), for the |
130 | * SI3312 SATA controller life is a bit simpler. Enforce UDMA33 | 131 | * SI3112 SATA controller life is a bit simpler. |
131 | * as a limit if there is no 80pin cable present. | ||
132 | */ | 132 | */ |
133 | 133 | ||
134 | static byte siimage_ratemask (ide_drive_t *drive) | 134 | static u8 sil_udma_filter(ide_drive_t *drive) |
135 | { | 135 | { |
136 | ide_hwif_t *hwif = HWIF(drive); | 136 | ide_hwif_t *hwif = drive->hwif; |
137 | u8 mode = 0, scsc = 0; | ||
138 | unsigned long base = (unsigned long) hwif->hwif_data; | 137 | unsigned long base = (unsigned long) hwif->hwif_data; |
138 | u8 mask = 0, scsc = 0; | ||
139 | 139 | ||
140 | if (hwif->mmio) | 140 | if (hwif->mmio) |
141 | scsc = hwif->INB(base + 0x4A); | 141 | scsc = hwif->INB(base + 0x4A); |
142 | else | 142 | else |
143 | pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc); | 143 | pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc); |
144 | 144 | ||
145 | if(is_sata(hwif)) | 145 | if (is_sata(hwif)) { |
146 | { | 146 | mask = strstr(drive->id->model, "Maxtor") ? 0x3f : 0x7f; |
147 | if(strstr(drive->id->model, "Maxtor")) | 147 | goto out; |
148 | return 3; | ||
149 | return 4; | ||
150 | } | 148 | } |
151 | 149 | ||
152 | if ((scsc & 0x30) == 0x10) /* 133 */ | 150 | if ((scsc & 0x30) == 0x10) /* 133 */ |
153 | mode = 4; | 151 | mask = 0x7f; |
154 | else if ((scsc & 0x30) == 0x20) /* 2xPCI */ | 152 | else if ((scsc & 0x30) == 0x20) /* 2xPCI */ |
155 | mode = 4; | 153 | mask = 0x7f; |
156 | else if ((scsc & 0x30) == 0x00) /* 100 */ | 154 | else if ((scsc & 0x30) == 0x00) /* 100 */ |
157 | mode = 3; | 155 | mask = 0x3f; |
158 | else /* Disabled ? */ | 156 | else /* Disabled ? */ |
159 | BUG(); | 157 | BUG(); |
160 | 158 | out: | |
161 | if (!eighty_ninty_three(drive)) | 159 | return mask; |
162 | mode = min(mode, (u8)1); | ||
163 | return mode; | ||
164 | } | 160 | } |
165 | 161 | ||
166 | /** | 162 | /** |
@@ -306,7 +302,7 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed) | |||
306 | ide_hwif_t *hwif = HWIF(drive); | 302 | ide_hwif_t *hwif = HWIF(drive); |
307 | u16 ultra = 0, multi = 0; | 303 | u16 ultra = 0, multi = 0; |
308 | u8 mode = 0, unit = drive->select.b.unit; | 304 | u8 mode = 0, unit = drive->select.b.unit; |
309 | u8 speed = ide_rate_filter(siimage_ratemask(drive), xferspeed); | 305 | u8 speed = ide_rate_filter(drive, xferspeed); |
310 | unsigned long base = (unsigned long)hwif->hwif_data; | 306 | unsigned long base = (unsigned long)hwif->hwif_data; |
311 | u8 scsc = 0, addr_mask = ((hwif->channel) ? | 307 | u8 scsc = 0, addr_mask = ((hwif->channel) ? |
312 | ((hwif->mmio) ? 0xF4 : 0x84) : | 308 | ((hwif->mmio) ? 0xF4 : 0x84) : |
@@ -389,7 +385,7 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed) | |||
389 | 385 | ||
390 | static int config_chipset_for_dma (ide_drive_t *drive) | 386 | static int config_chipset_for_dma (ide_drive_t *drive) |
391 | { | 387 | { |
392 | u8 speed = ide_dma_speed(drive, siimage_ratemask(drive)); | 388 | u8 speed = ide_max_dma_mode(drive); |
393 | 389 | ||
394 | if (!speed) | 390 | if (!speed) |
395 | return 0; | 391 | return 0; |
@@ -989,6 +985,7 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) | |||
989 | hwif->tuneproc = &siimage_tuneproc; | 985 | hwif->tuneproc = &siimage_tuneproc; |
990 | hwif->reset_poll = &siimage_reset_poll; | 986 | hwif->reset_poll = &siimage_reset_poll; |
991 | hwif->pre_reset = &siimage_pre_reset; | 987 | hwif->pre_reset = &siimage_pre_reset; |
988 | hwif->udma_filter = &sil_udma_filter; | ||
992 | 989 | ||
993 | if(is_sata(hwif)) { | 990 | if(is_sata(hwif)) { |
994 | static int first = 1; | 991 | static int first = 1; |
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 6fe4ecb6c06c..83c80ed73e99 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c | |||
@@ -428,16 +428,6 @@ static int sis_get_info (char *buffer, char **addr, off_t offset, int count) | |||
428 | } | 428 | } |
429 | #endif /* defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS) */ | 429 | #endif /* defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS) */ |
430 | 430 | ||
431 | static u8 sis5513_ratemask (ide_drive_t *drive) | ||
432 | { | ||
433 | u8 rates[] = { 0, 0, 1, 2, 3, 3, 4, 4 }; | ||
434 | u8 mode = rates[chipset_family]; | ||
435 | |||
436 | if (!eighty_ninty_three(drive)) | ||
437 | mode = min(mode, (u8)1); | ||
438 | return mode; | ||
439 | } | ||
440 | |||
441 | /* | 431 | /* |
442 | * Configuration functions | 432 | * Configuration functions |
443 | */ | 433 | */ |
@@ -563,7 +553,7 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
563 | u8 drive_pci, reg, speed; | 553 | u8 drive_pci, reg, speed; |
564 | u32 regdw; | 554 | u32 regdw; |
565 | 555 | ||
566 | speed = ide_rate_filter(sis5513_ratemask(drive), xferspeed); | 556 | speed = ide_rate_filter(drive, xferspeed); |
567 | 557 | ||
568 | /* See config_art_rwp_pio for drive pci config registers */ | 558 | /* See config_art_rwp_pio for drive pci config registers */ |
569 | drive_pci = 0x40; | 559 | drive_pci = 0x40; |
@@ -653,7 +643,7 @@ static void sis5513_tune_drive (ide_drive_t *drive, u8 pio) | |||
653 | */ | 643 | */ |
654 | static int config_chipset_for_dma (ide_drive_t *drive) | 644 | static int config_chipset_for_dma (ide_drive_t *drive) |
655 | { | 645 | { |
656 | u8 speed = ide_dma_speed(drive, sis5513_ratemask(drive)); | 646 | u8 speed = ide_max_dma_mode(drive); |
657 | 647 | ||
658 | #ifdef DEBUG | 648 | #ifdef DEBUG |
659 | printk("SIS5513: config_chipset_for_dma, drive %d, ultra %x\n", | 649 | printk("SIS5513: config_chipset_for_dma, drive %d, ultra %x\n", |
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c index 852ccb36da1d..9e95a5cbf984 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/pci/slc90e66.c | |||
@@ -21,15 +21,6 @@ | |||
21 | 21 | ||
22 | #include <asm/io.h> | 22 | #include <asm/io.h> |
23 | 23 | ||
24 | static u8 slc90e66_ratemask (ide_drive_t *drive) | ||
25 | { | ||
26 | u8 mode = 2; | ||
27 | |||
28 | if (!eighty_ninty_three(drive)) | ||
29 | mode = min_t(u8, mode, 1); | ||
30 | return mode; | ||
31 | } | ||
32 | |||
33 | static u8 slc90e66_dma_2_pio (u8 xfer_rate) { | 24 | static u8 slc90e66_dma_2_pio (u8 xfer_rate) { |
34 | switch(xfer_rate) { | 25 | switch(xfer_rate) { |
35 | case XFER_UDMA_4: | 26 | case XFER_UDMA_4: |
@@ -122,7 +113,7 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
122 | ide_hwif_t *hwif = HWIF(drive); | 113 | ide_hwif_t *hwif = HWIF(drive); |
123 | struct pci_dev *dev = hwif->pci_dev; | 114 | struct pci_dev *dev = hwif->pci_dev; |
124 | u8 maslave = hwif->channel ? 0x42 : 0x40; | 115 | u8 maslave = hwif->channel ? 0x42 : 0x40; |
125 | u8 speed = ide_rate_filter(slc90e66_ratemask(drive), xferspeed); | 116 | u8 speed = ide_rate_filter(drive, xferspeed); |
126 | int sitre = 0, a_speed = 7 << (drive->dn * 4); | 117 | int sitre = 0, a_speed = 7 << (drive->dn * 4); |
127 | int u_speed = 0, u_flag = 1 << drive->dn; | 118 | int u_speed = 0, u_flag = 1 << drive->dn; |
128 | u16 reg4042, reg44, reg48, reg4a; | 119 | u16 reg4042, reg44, reg48, reg4a; |
@@ -171,7 +162,7 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed) | |||
171 | 162 | ||
172 | static int slc90e66_config_drive_for_dma (ide_drive_t *drive) | 163 | static int slc90e66_config_drive_for_dma (ide_drive_t *drive) |
173 | { | 164 | { |
174 | u8 speed = ide_dma_speed(drive, slc90e66_ratemask(drive)); | 165 | u8 speed = ide_max_dma_mode(drive); |
175 | 166 | ||
176 | if (!speed) | 167 | if (!speed) |
177 | return 0; | 168 | return 0; |
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c index 0b6d81d6ce48..168f035caa3f 100644 --- a/drivers/ide/pci/tc86c001.c +++ b/drivers/ide/pci/tc86c001.c | |||
@@ -13,18 +13,13 @@ | |||
13 | #include <linux/pci.h> | 13 | #include <linux/pci.h> |
14 | #include <linux/ide.h> | 14 | #include <linux/ide.h> |
15 | 15 | ||
16 | static inline u8 tc86c001_ratemask(ide_drive_t *drive) | ||
17 | { | ||
18 | return eighty_ninty_three(drive) ? 2 : 1; | ||
19 | } | ||
20 | |||
21 | static int tc86c001_tune_chipset(ide_drive_t *drive, u8 speed) | 16 | static int tc86c001_tune_chipset(ide_drive_t *drive, u8 speed) |
22 | { | 17 | { |
23 | ide_hwif_t *hwif = HWIF(drive); | 18 | ide_hwif_t *hwif = HWIF(drive); |
24 | unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00); | 19 | unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00); |
25 | u16 mode, scr = hwif->INW(scr_port); | 20 | u16 mode, scr = hwif->INW(scr_port); |
26 | 21 | ||
27 | speed = ide_rate_filter(tc86c001_ratemask(drive), speed); | 22 | speed = ide_rate_filter(drive, speed); |
28 | 23 | ||
29 | switch (speed) { | 24 | switch (speed) { |
30 | case XFER_UDMA_4: mode = 0x00c0; break; | 25 | case XFER_UDMA_4: mode = 0x00c0; break; |
@@ -174,7 +169,7 @@ static int tc86c001_busproc(ide_drive_t *drive, int state) | |||
174 | 169 | ||
175 | static int config_chipset_for_dma(ide_drive_t *drive) | 170 | static int config_chipset_for_dma(ide_drive_t *drive) |
176 | { | 171 | { |
177 | u8 speed = ide_dma_speed(drive, tc86c001_ratemask(drive)); | 172 | u8 speed = ide_max_dma_mode(drive); |
178 | 173 | ||
179 | if (!speed) | 174 | if (!speed) |
180 | return 0; | 175 | return 0; |
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c index 5e06179c3469..8a877235b949 100644 --- a/drivers/ide/pci/triflex.c +++ b/drivers/ide/pci/triflex.c | |||
@@ -48,7 +48,7 @@ static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed) | |||
48 | u16 timing = 0; | 48 | u16 timing = 0; |
49 | u32 triflex_timings = 0; | 49 | u32 triflex_timings = 0; |
50 | u8 unit = (drive->select.b.unit & 0x01); | 50 | u8 unit = (drive->select.b.unit & 0x01); |
51 | u8 speed = ide_rate_filter(0, xferspeed); | 51 | u8 speed = ide_rate_filter(drive, xferspeed); |
52 | 52 | ||
53 | pci_read_config_dword(dev, channel_offset, &triflex_timings); | 53 | pci_read_config_dword(dev, channel_offset, &triflex_timings); |
54 | 54 | ||
@@ -102,7 +102,7 @@ static void triflex_tune_drive(ide_drive_t *drive, u8 pio) | |||
102 | 102 | ||
103 | static int triflex_config_drive_for_dma(ide_drive_t *drive) | 103 | static int triflex_config_drive_for_dma(ide_drive_t *drive) |
104 | { | 104 | { |
105 | int speed = ide_dma_speed(drive, 0); /* No ultra speeds */ | 105 | u8 speed = ide_max_dma_mode(drive); |
106 | 106 | ||
107 | if (!speed) | 107 | if (!speed) |
108 | return 0; | 108 | return 0; |