1 files changed, 9 insertions, 1 deletions

diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 4315b23590bd..eacb588a9345 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -120,7 +120,8 @@
 #define  MX2_UCR3_RXDMUXSEL      (1<<2)  /* RXD Muxed Input Select, on mx2/mx3 */
 #define  UCR3_INVT       (1<<1)  /* Inverted Infrared transmission */
 #define  UCR3_BPEN       (1<<0)  /* Preset registers enable */
-#define  UCR4_CTSTL_32   (32<<10) /* CTS trigger level (32 chars) */
+#define  UCR4_CTSTL_SHF  10      /* CTS trigger level shift */
+#define  UCR4_CTSTL_MASK 0x3F    /* CTS trigger is 6 bits wide */
 #define  UCR4_INVR       (1<<9)  /* Inverted infrared reception */
 #define  UCR4_ENIRI      (1<<8)  /* Serial infrared interrupt enable */
 #define  UCR4_WKEN       (1<<7)  /* Wake interrupt enable */
@@ -591,6 +592,9 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
         return 0;
 }
 
+/* half the RX buffer size */
+#define CTSTL 16
+
 static int imx_startup(struct uart_port *port)
 {
         struct imx_port *sport = (struct imx_port *)port;
@@ -607,6 +611,10 @@ static int imx_startup(struct uart_port *port)
         if (USE_IRDA(sport))
                 temp |= UCR4_IRSC;
 
+        /* set the trigger level for CTS */
+        temp &= ~(UCR4_CTSTL_MASK<<  UCR4_CTSTL_SHF);
+        temp |= CTSTL<<  UCR4_CTSTL_SHF;
+
         writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
 
         if (USE_IRDA(sport)) {