aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/scsi/Kconfig8
-rw-r--r--drivers/scsi/Makefile1
-rw-r--r--drivers/scsi/sata_sil24.c785
3 files changed, 794 insertions, 0 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 12c208fb18c5..79ba45c1e9c0 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -499,6 +499,14 @@ config SCSI_SATA_SIL
499 499
500 If unsure, say N. 500 If unsure, say N.
501 501
502config SCSI_SATA_SIL24
503 tristate "Silicon Image 3124/3132 SATA support"
504 depends on SCSI_SATA && PCI && EXPERIMENTAL
505 help
506 This option enables support for Silicon Image 3124/3132 Serial ATA.
507
508 If unsure, say N.
509
502config SCSI_SATA_SIS 510config SCSI_SATA_SIS
503 tristate "SiS 964/180 SATA support" 511 tristate "SiS 964/180 SATA support"
504 depends on SCSI_SATA && PCI && EXPERIMENTAL 512 depends on SCSI_SATA && PCI && EXPERIMENTAL
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 3746fb9fa2f5..64aaab64aeb6 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -126,6 +126,7 @@ obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o
126obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o 126obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o
127obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o 127obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o
128obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o 128obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o
129obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o
129obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o 130obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o
130obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o 131obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o
131obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o 132obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
new file mode 100644
index 000000000000..cb91894471f2
--- /dev/null
+++ b/drivers/scsi/sata_sil24.c
@@ -0,0 +1,785 @@
1/*
2 * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
3 *
4 * Copyright 2005 Tejun Heo
5 *
6 * Based on preview driver from Silicon Image.
7 *
8 * NOTE: No NCQ/ATAPI support yet. The preview driver didn't support
9 * NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make
10 * those work. Enabling those shouldn't be difficult. Basic
11 * structure is all there (in libata-dev tree). If you have any
12 * information about this hardware, please contact me or linux-ide.
13 * Info is needed on...
14 *
15 * - How to issue tagged commands and turn on sactive on issue accordingly.
16 * - Where to put an ATAPI command and how to tell the device to send it.
17 * - How to enable/use 64bit.
18 *
19 * This program is free software; you can redistribute it and/or modify it
20 * under the terms of the GNU General Public License as published by the
21 * Free Software Foundation; either version 2, or (at your option) any
22 * later version.
23 *
24 * This program is distributed in the hope that it will be useful, but
25 * WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
27 * General Public License for more details.
28 *
29 */
30
31#include <linux/kernel.h>
32#include <linux/module.h>
33#include <linux/pci.h>
34#include <linux/blkdev.h>
35#include <linux/delay.h>
36#include <linux/interrupt.h>
37#include <linux/dma-mapping.h>
38#include <scsi/scsi_host.h>
39#include "scsi.h"
40#include <linux/libata.h>
41#include <asm/io.h>
42
43#define DRV_NAME "sata_sil24"
44#define DRV_VERSION "0.20" /* Silicon Image's preview driver was 0.10 */
45
46#define NR_PORTS 4
47
48/*
49 * Port request block (PRB) 32 bytes
50 */
51struct sil24_prb {
52 u16 ctrl;
53 u16 prot;
54 u32 rx_cnt;
55 u8 fis[6 * 4];
56};
57
58/*
59 * Scatter gather entry (SGE) 16 bytes
60 */
61struct sil24_sge {
62 u64 addr;
63 u32 cnt;
64 u32 flags;
65};
66
67/*
68 * Port multiplier
69 */
70struct sil24_port_multiplier {
71 u32 diag;
72 u32 sactive;
73};
74
75enum {
76 /*
77 * Global controller registers (128 bytes @ BAR0)
78 */
79 /* 32 bit regs */
80 HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */
81 HOST_CTRL = 0x40,
82 HOST_IRQ_STAT = 0x44,
83 HOST_PHY_CFG = 0x48,
84 HOST_BIST_CTRL = 0x50,
85 HOST_BIST_PTRN = 0x54,
86 HOST_BIST_STAT = 0x58,
87 HOST_MEM_BIST_STAT = 0x5c,
88 HOST_FLASH_CMD = 0x70,
89 /* 8 bit regs */
90 HOST_FLASH_DATA = 0x74,
91 HOST_TRANSITION_DETECT = 0x75,
92 HOST_GPIO_CTRL = 0x76,
93 HOST_I2C_ADDR = 0x78, /* 32 bit */
94 HOST_I2C_DATA = 0x7c,
95 HOST_I2C_XFER_CNT = 0x7e,
96 HOST_I2C_CTRL = 0x7f,
97
98 /* HOST_SLOT_STAT bits */
99 HOST_SSTAT_ATTN = (1 << 31),
100
101 /*
102 * Port registers
103 * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
104 */
105 PORT_REGS_SIZE = 0x2000,
106 PORT_PRB = 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */
107
108 PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */
109 /* 32 bit regs */
110 PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */
111 PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */
112 PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */
113 PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */
114 PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */
115 PORT_ACTIVATE_UPPER_ADDR= 0x101c,
116 PORT_EXEC_FIFO = 0x1020, /* command execution fifo */
117 PORT_CMD_ERR = 0x1024, /* command error number */
118 PORT_FIS_CFG = 0x1028,
119 PORT_FIFO_THRES = 0x102c,
120 /* 16 bit regs */
121 PORT_DECODE_ERR_CNT = 0x1040,
122 PORT_DECODE_ERR_THRESH = 0x1042,
123 PORT_CRC_ERR_CNT = 0x1044,
124 PORT_CRC_ERR_THRESH = 0x1046,
125 PORT_HSHK_ERR_CNT = 0x1048,
126 PORT_HSHK_ERR_THRESH = 0x104a,
127 /* 32 bit regs */
128 PORT_PHY_CFG = 0x1050,
129 PORT_SLOT_STAT = 0x1800,
130 PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
131 PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
132 PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
133 PORT_SCONTROL = 0x1f00,
134 PORT_SSTATUS = 0x1f04,
135 PORT_SERROR = 0x1f08,
136 PORT_SACTIVE = 0x1f0c,
137
138 /* PORT_CTRL_STAT bits */
139 PORT_CS_PORT_RST = (1 << 0), /* port reset */
140 PORT_CS_DEV_RST = (1 << 1), /* device reset */
141 PORT_CS_INIT = (1 << 2), /* port initialize */
142 PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */
143 PORT_CS_RESUME = (1 << 6), /* port resume */
144 PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */
145 PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */
146 PORT_CS_RDY = (1 << 31), /* port ready to accept commands */
147
148 /* PORT_IRQ_STAT/ENABLE_SET/CLR */
149 /* bits[11:0] are masked */
150 PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */
151 PORT_IRQ_ERROR = (1 << 1), /* command execution error */
152 PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */
153 PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */
154 PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */
155 PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */
156 PORT_IRQ_UNK_FIS = (1 << 6), /* Unknown FIS received */
157 PORT_IRQ_SDB_FIS = (1 << 11), /* SDB FIS received */
158
159 /* bits[27:16] are unmasked (raw) */
160 PORT_IRQ_RAW_SHIFT = 16,
161 PORT_IRQ_MASKED_MASK = 0x7ff,
162 PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT),
163
164 /* ENABLE_SET/CLR specific, intr steering - 2 bit field */
165 PORT_IRQ_STEER_SHIFT = 30,
166 PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT),
167
168 /* PORT_CMD_ERR constants */
169 PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */
170 PORT_CERR_SDB = 2, /* Error bit in SDB FIS */
171 PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */
172 PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */
173 PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */
174 PORT_CERR_DIRECTION = 6, /* Data direction mismatch */
175 PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */
176 PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */
177 PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */
178 PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */
179 PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */
180 PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */
181 PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
182 PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
183 PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */
184 PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */
185 PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
186 PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */
187 PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */
188 PORT_CERR_XFR_MSGABRT = 34, /* PSD ecode 10 - master abort */
189 PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */
190 PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */
191
192 /*
193 * Other constants
194 */
195 SGE_TRM = (1 << 31), /* Last SGE in chain */
196 PRB_SOFT_RST = (1 << 7), /* Soft reset request (ign BSY?) */
197
198 /* board id */
199 BID_SIL3124 = 0,
200 BID_SIL3132 = 1,
201
202 IRQ_STAT_4PORTS = 0xf,
203};
204
205struct sil24_cmd_block {
206 struct sil24_prb prb;
207 struct sil24_sge sge[LIBATA_MAX_PRD];
208};
209
210/*
211 * ap->private_data
212 *
213 * The preview driver always returned 0 for status. We emulate it
214 * here from the previous interrupt.
215 */
216struct sil24_port_priv {
217 struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */
218 dma_addr_t cmd_block_dma; /* DMA base addr for them */
219};
220
221/* ap->host_set->private_data */
222struct sil24_host_priv {
223 void *host_base; /* global controller control (128 bytes @BAR0) */
224 void *port_base; /* port registers (4 * 8192 bytes @BAR2) */
225};
226
227static u8 sil24_check_status(struct ata_port *ap);
228static u8 sil24_check_err(struct ata_port *ap);
229static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
230static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
231static void sil24_phy_reset(struct ata_port *ap);
232static void sil24_qc_prep(struct ata_queued_cmd *qc);
233static int sil24_qc_issue(struct ata_queued_cmd *qc);
234static void sil24_irq_clear(struct ata_port *ap);
235static void sil24_eng_timeout(struct ata_port *ap);
236static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
237static int sil24_port_start(struct ata_port *ap);
238static void sil24_port_stop(struct ata_port *ap);
239static void sil24_host_stop(struct ata_host_set *host_set);
240static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
241
242static struct pci_device_id sil24_pci_tbl[] = {
243 { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 },
244 { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 },
245};
246
247static struct pci_driver sil24_pci_driver = {
248 .name = DRV_NAME,
249 .id_table = sil24_pci_tbl,
250 .probe = sil24_init_one,
251 .remove = ata_pci_remove_one, /* safe? */
252};
253
254static Scsi_Host_Template sil24_sht = {
255 .module = THIS_MODULE,
256 .name = DRV_NAME,
257 .ioctl = ata_scsi_ioctl,
258 .queuecommand = ata_scsi_queuecmd,
259 .eh_strategy_handler = ata_scsi_error,
260 .can_queue = ATA_DEF_QUEUE,
261 .this_id = ATA_SHT_THIS_ID,
262 .sg_tablesize = LIBATA_MAX_PRD,
263 .max_sectors = ATA_MAX_SECTORS,
264 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
265 .emulated = ATA_SHT_EMULATED,
266 .use_clustering = ATA_SHT_USE_CLUSTERING,
267 .proc_name = DRV_NAME,
268 .dma_boundary = ATA_DMA_BOUNDARY,
269 .slave_configure = ata_scsi_slave_config,
270 .bios_param = ata_std_bios_param,
271 .ordered_flush = 1, /* NCQ not supported yet */
272};
273
274static struct ata_port_operations sil24_ops = {
275 .port_disable = ata_port_disable,
276
277 .check_status = sil24_check_status,
278 .check_altstatus = sil24_check_status,
279 .check_err = sil24_check_err,
280 .dev_select = ata_noop_dev_select,
281
282 .phy_reset = sil24_phy_reset,
283
284 .qc_prep = sil24_qc_prep,
285 .qc_issue = sil24_qc_issue,
286
287 .eng_timeout = sil24_eng_timeout,
288
289 .irq_handler = sil24_interrupt,
290 .irq_clear = sil24_irq_clear,
291
292 .scr_read = sil24_scr_read,
293 .scr_write = sil24_scr_write,
294
295 .port_start = sil24_port_start,
296 .port_stop = sil24_port_stop,
297 .host_stop = sil24_host_stop,
298};
299
300static struct ata_port_info sil24_port_info[] = {
301 /* sil_3124 */
302 {
303 .sht = &sil24_sht,
304 .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
305 ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
306 ATA_FLAG_PIO_DMA,
307 .pio_mask = 0x1f, /* pio0-4 */
308 .mwdma_mask = 0x07, /* mwdma0-2 */
309 .udma_mask = 0x3f, /* udma0-5 */
310 .port_ops = &sil24_ops,
311 },
312 /* sil_3132 */
313 {
314 .sht = &sil24_sht,
315 .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
316 ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
317 ATA_FLAG_PIO_DMA,
318 .pio_mask = 0x1f, /* pio0-4 */
319 .mwdma_mask = 0x07, /* mwdma0-2 */
320 .udma_mask = 0x3f, /* udma0-5 */
321 .port_ops = &sil24_ops,
322 },
323};
324
325static u8 sil24_check_status(struct ata_port *ap)
326{
327 return ATA_DRDY;
328}
329
330static u8 sil24_check_err(struct ata_port *ap)
331{
332 return 0;
333}
334
335static int sil24_scr_map[] = {
336 [SCR_CONTROL] = 0,
337 [SCR_STATUS] = 1,
338 [SCR_ERROR] = 2,
339 [SCR_ACTIVE] = 3,
340};
341
342static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg)
343{
344 void *scr_addr = (void *)ap->ioaddr.scr_addr;
345 if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
346 void *addr;
347 addr = scr_addr + sil24_scr_map[sc_reg] * 4;
348 return readl(scr_addr + sil24_scr_map[sc_reg] * 4);
349 }
350 return 0xffffffffU;
351}
352
353static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
354{
355 void *scr_addr = (void *)ap->ioaddr.scr_addr;
356 if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
357 void *addr;
358 addr = scr_addr + sil24_scr_map[sc_reg] * 4;
359 writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
360 }
361}
362
363static void sil24_phy_reset(struct ata_port *ap)
364{
365 __sata_phy_reset(ap);
366 /*
367 * No ATAPI yet. Just unconditionally indicate ATA device.
368 * If ATAPI device is attached, it will fail ATA_CMD_ID_ATA
369 * and libata core will ignore the device.
370 */
371 if (!(ap->flags & ATA_FLAG_PORT_DISABLED))
372 ap->device[0].class = ATA_DEV_ATA;
373}
374
375static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
376 struct sil24_cmd_block *cb)
377{
378 struct scatterlist *sg = qc->sg;
379 struct sil24_sge *sge = cb->sge;
380 unsigned i;
381
382 for (i = 0; i < qc->n_elem; i++, sg++, sge++) {
383 sge->addr = cpu_to_le64(sg_dma_address(sg));
384 sge->cnt = cpu_to_le32(sg_dma_len(sg));
385 sge->flags = 0;
386 sge->flags = i < qc->n_elem - 1 ? 0 : cpu_to_le32(SGE_TRM);
387 }
388}
389
390static void sil24_qc_prep(struct ata_queued_cmd *qc)
391{
392 struct ata_port *ap = qc->ap;
393 struct sil24_port_priv *pp = ap->private_data;
394 struct sil24_cmd_block *cb = pp->cmd_block + qc->tag;
395 struct sil24_prb *prb = &cb->prb;
396
397 switch (qc->tf.protocol) {
398 case ATA_PROT_PIO:
399 case ATA_PROT_DMA:
400 case ATA_PROT_NODATA:
401 break;
402 default:
403 /* ATAPI isn't supported yet */
404 BUG();
405 }
406
407 ata_tf_to_fis(&qc->tf, prb->fis, 0);
408
409 if (qc->flags & ATA_QCFLAG_DMAMAP)
410 sil24_fill_sg(qc, cb);
411}
412
413static int sil24_qc_issue(struct ata_queued_cmd *qc)
414{
415 struct ata_port *ap = qc->ap;
416 void *port = (void *)ap->ioaddr.cmd_addr;
417 struct sil24_port_priv *pp = ap->private_data;
418 dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block);
419
420 writel((u32)paddr, port + PORT_CMD_ACTIVATE);
421 return 0;
422}
423
424static void sil24_irq_clear(struct ata_port *ap)
425{
426 /* unused */
427}
428
429static void sil24_reset_controller(struct ata_port *ap)
430{
431 void *port = (void *)ap->ioaddr.cmd_addr;
432 int cnt;
433 u32 tmp;
434
435 printk(KERN_NOTICE DRV_NAME
436 " ata%u: resetting controller...\n", ap->id);
437
438 /* Reset controller state. Is this correct? */
439 writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
440 readl(port + PORT_CTRL_STAT); /* sync */
441
442 /* Max ~100ms */
443 for (cnt = 0; cnt < 1000; cnt++) {
444 udelay(100);
445 tmp = readl(port + PORT_CTRL_STAT);
446 if (!(tmp & PORT_CS_DEV_RST))
447 break;
448 }
449 if (tmp & PORT_CS_DEV_RST)
450 printk(KERN_ERR DRV_NAME
451 " ata%u: failed to reset controller\n", ap->id);
452}
453
454static void sil24_eng_timeout(struct ata_port *ap)
455{
456 struct ata_queued_cmd *qc;
457
458 qc = ata_qc_from_tag(ap, ap->active_tag);
459 if (!qc) {
460 printk(KERN_ERR "ata%u: BUG: tiemout without command\n",
461 ap->id);
462 return;
463 }
464
465 /*
466 * hack alert! We cannot use the supplied completion
467 * function from inside the ->eh_strategy_handler() thread.
468 * libata is the only user of ->eh_strategy_handler() in
469 * any kernel, so the default scsi_done() assumes it is
470 * not being called from the SCSI EH.
471 */
472 printk(KERN_ERR "ata%u: command timeout\n", ap->id);
473 qc->scsidone = scsi_finish_command;
474 ata_qc_complete(qc, ATA_ERR);
475
476 sil24_reset_controller(ap);
477}
478
479static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
480{
481 struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
482 void *port = (void *)ap->ioaddr.cmd_addr;
483 u32 irq_stat, cmd_err, sstatus, serror;
484
485 irq_stat = readl(port + PORT_IRQ_STAT);
486 cmd_err = readl(port + PORT_CMD_ERR);
487 sstatus = readl(port + PORT_SSTATUS);
488 serror = readl(port + PORT_SERROR);
489
490 /* Clear IRQ/errors */
491 writel(irq_stat, port + PORT_IRQ_STAT);
492 if (cmd_err)
493 writel(cmd_err, port + PORT_CMD_ERR);
494 if (serror)
495 writel(serror, port + PORT_SERROR);
496
497 printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n"
498 " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
499 ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
500
501 if (qc)
502 ata_qc_complete(qc, ATA_ERR);
503
504 sil24_reset_controller(ap);
505}
506
507static inline void sil24_host_intr(struct ata_port *ap)
508{
509 struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
510 void *port = (void *)ap->ioaddr.cmd_addr;
511 u32 slot_stat;
512
513 slot_stat = readl(port + PORT_SLOT_STAT);
514 if (!(slot_stat & HOST_SSTAT_ATTN)) {
515 if (qc)
516 ata_qc_complete(qc, 0);
517 } else
518 sil24_error_intr(ap, slot_stat);
519}
520
521static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
522{
523 struct ata_host_set *host_set = dev_instance;
524 struct sil24_host_priv *hpriv = host_set->private_data;
525 unsigned handled = 0;
526 u32 status;
527 int i;
528
529 status = readl(hpriv->host_base + HOST_IRQ_STAT);
530
531 if (status == 0xffffffff) {
532 printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, "
533 "PCI fault or device removal?\n");
534 goto out;
535 }
536
537 if (!(status & IRQ_STAT_4PORTS))
538 goto out;
539
540 spin_lock(&host_set->lock);
541
542 for (i = 0; i < host_set->n_ports; i++)
543 if (status & (1 << i)) {
544 struct ata_port *ap = host_set->ports[i];
545 if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) {
546 sil24_host_intr(host_set->ports[i]);
547 handled++;
548 } else
549 printk(KERN_ERR DRV_NAME
550 ": interrupt from disabled port %d\n", i);
551 }
552
553 spin_unlock(&host_set->lock);
554 out:
555 return IRQ_RETVAL(handled);
556}
557
558static int sil24_port_start(struct ata_port *ap)
559{
560 struct device *dev = ap->host_set->dev;
561 struct sil24_port_priv *pp;
562 struct sil24_cmd_block *cb;
563 size_t cb_size = sizeof(*cb);
564 dma_addr_t cb_dma;
565
566 pp = kmalloc(sizeof(*pp), GFP_KERNEL);
567 if (!pp)
568 return -ENOMEM;
569 memset(pp, 0, sizeof(*pp));
570
571 cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
572 if (!cb) {
573 kfree(pp);
574 return -ENOMEM;
575 }
576 memset(cb, 0, cb_size);
577
578 pp->cmd_block = cb;
579 pp->cmd_block_dma = cb_dma;
580
581 ap->private_data = pp;
582
583 return 0;
584}
585
586static void sil24_port_stop(struct ata_port *ap)
587{
588 struct device *dev = ap->host_set->dev;
589 struct sil24_port_priv *pp = ap->private_data;
590 size_t cb_size = sizeof(*pp->cmd_block);
591
592 dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma);
593 kfree(pp);
594}
595
596static void sil24_host_stop(struct ata_host_set *host_set)
597{
598 struct sil24_host_priv *hpriv = host_set->private_data;
599
600 iounmap(hpriv->host_base);
601 iounmap(hpriv->port_base);
602 kfree(hpriv);
603}
604
605static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
606{
607 static int printed_version = 0;
608 unsigned int board_id = (unsigned int)ent->driver_data;
609 struct ata_probe_ent *probe_ent = NULL;
610 struct sil24_host_priv *hpriv = NULL;
611 void *host_base = NULL, *port_base = NULL;
612 int i, rc;
613
614 if (!printed_version++)
615 printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
616
617 rc = pci_enable_device(pdev);
618 if (rc)
619 return rc;
620
621 rc = pci_request_regions(pdev, DRV_NAME);
622 if (rc)
623 goto out_disable;
624
625 rc = -ENOMEM;
626 /* ioremap mmio registers */
627 host_base = ioremap(pci_resource_start(pdev, 0),
628 pci_resource_len(pdev, 0));
629 if (!host_base)
630 goto out_free;
631 port_base = ioremap(pci_resource_start(pdev, 2),
632 pci_resource_len(pdev, 2));
633 if (!port_base)
634 goto out_free;
635
636 /* allocate & init probe_ent and hpriv */
637 probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
638 if (!probe_ent)
639 goto out_free;
640
641 hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL);
642 if (!hpriv)
643 goto out_free;
644
645 memset(probe_ent, 0, sizeof(*probe_ent));
646 probe_ent->dev = pci_dev_to_dev(pdev);
647 INIT_LIST_HEAD(&probe_ent->node);
648
649 probe_ent->sht = sil24_port_info[board_id].sht;
650 probe_ent->host_flags = sil24_port_info[board_id].host_flags;
651 probe_ent->pio_mask = sil24_port_info[board_id].pio_mask;
652 probe_ent->udma_mask = sil24_port_info[board_id].udma_mask;
653 probe_ent->port_ops = sil24_port_info[board_id].port_ops;
654 probe_ent->n_ports = (board_id == BID_SIL3124) ? 4 : 2;
655
656 probe_ent->irq = pdev->irq;
657 probe_ent->irq_flags = SA_SHIRQ;
658 probe_ent->mmio_base = port_base;
659 probe_ent->private_data = hpriv;
660
661 memset(hpriv, 0, sizeof(*hpriv));
662 hpriv->host_base = host_base;
663 hpriv->port_base = port_base;
664
665 /*
666 * Configure the device
667 */
668 /*
669 * FIXME: This device is certainly 64-bit capable. We just
670 * don't know how to use it. After fixing 32bit activation in
671 * this function, enable 64bit masks here.
672 */
673 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
674 if (rc) {
675 printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n",
676 pci_name(pdev));
677 goto out_free;
678 }
679 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
680 if (rc) {
681 printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n",
682 pci_name(pdev));
683 goto out_free;
684 }
685
686 /* GPIO off */
687 writel(0, host_base + HOST_FLASH_CMD);
688
689 /* Mask interrupts during initialization */
690 writel(0, host_base + HOST_CTRL);
691
692 for (i = 0; i < probe_ent->n_ports; i++) {
693 void *port = port_base + i * PORT_REGS_SIZE;
694 unsigned long portu = (unsigned long)port;
695 u32 tmp;
696 int cnt;
697
698 probe_ent->port[i].cmd_addr = portu + PORT_PRB;
699 probe_ent->port[i].scr_addr = portu + PORT_SCONTROL;
700
701 ata_std_ports(&probe_ent->port[i]);
702
703 /* Initial PHY setting */
704 writel(0x20c, port + PORT_PHY_CFG);
705
706 /* Clear port RST */
707 tmp = readl(port + PORT_CTRL_STAT);
708 if (tmp & PORT_CS_PORT_RST) {
709 writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
710 readl(port + PORT_CTRL_STAT); /* sync */
711 for (cnt = 0; cnt < 10; cnt++) {
712 msleep(10);
713 tmp = readl(port + PORT_CTRL_STAT);
714 if (!(tmp & PORT_CS_PORT_RST))
715 break;
716 }
717 if (tmp & PORT_CS_PORT_RST)
718 printk(KERN_ERR DRV_NAME
719 "(%s): failed to clear port RST\n",
720 pci_name(pdev));
721 }
722
723 /* Zero error counters. */
724 writel(0x8000, port + PORT_DECODE_ERR_THRESH);
725 writel(0x8000, port + PORT_CRC_ERR_THRESH);
726 writel(0x8000, port + PORT_HSHK_ERR_THRESH);
727 writel(0x0000, port + PORT_DECODE_ERR_CNT);
728 writel(0x0000, port + PORT_CRC_ERR_CNT);
729 writel(0x0000, port + PORT_HSHK_ERR_CNT);
730
731 /* FIXME: 32bit activation? */
732 writel(0, port + PORT_ACTIVATE_UPPER_ADDR);
733 writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_STAT);
734
735 /* Configure interrupts */
736 writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
737 writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | PORT_IRQ_SDB_FIS,
738 port + PORT_IRQ_ENABLE_SET);
739
740 /* Clear interrupts */
741 writel(0x0fff0fff, port + PORT_IRQ_STAT);
742 writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
743 }
744
745 /* Turn on interrupts */
746 writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
747
748 pci_set_master(pdev);
749
750 /* FIXME: check ata_device_add return value */
751 ata_device_add(probe_ent);
752
753 kfree(probe_ent);
754 return 0;
755
756 out_free:
757 if (host_base)
758 iounmap(host_base);
759 if (port_base)
760 iounmap(port_base);
761 kfree(probe_ent);
762 kfree(hpriv);
763 pci_release_regions(pdev);
764 out_disable:
765 pci_disable_device(pdev);
766 return rc;
767}
768
769static int __init sil24_init(void)
770{
771 return pci_module_init(&sil24_pci_driver);
772}
773
774static void __exit sil24_exit(void)
775{
776 pci_unregister_driver(&sil24_pci_driver);
777}
778
779MODULE_AUTHOR("Tejun Heo");
780MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
781MODULE_LICENSE("GPL");
782MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
783
784module_init(sil24_init);
785module_exit(sil24_exit);
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-29 07:17:30 -0500