8 files changed, 10 insertions, 10 deletions

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 2af12fc45115..ad8b537ad47b 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -994,7 +994,7 @@ config HPET
         help
           If you say Y here, you will have a miscdevice named "/dev/hpet/".  Each
           open selects one of the timers supported by the HPET.  The timers are
-          non-periodioc and/or periodic.
+          non-periodic and/or periodic.
 
 config HPET_RTC_IRQ
         bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index bf267552941f..b8fde5cf4735 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -24,7 +24,7 @@ config VIDEO_HELPER_CHIPS_AUTO
           decode audio/video standards. This option will autoselect
           all pertinent modules to each selected video module.
 
-          Unselect this only if you know exaclty what you are doing, since
+          Unselect this only if you know exactly what you are doing, since
           it may break support on some boards.
 
           In doubt, say Y.
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 24747bdc3e19..d132ed571f13 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -607,7 +607,7 @@ config MTD_BAST_MAXSIZE
         default "4"
 
 config MTD_SHARP_SL
-        bool "ROM maped on Sharp SL Series"
+        bool "ROM mapped on Sharp SL Series"
         depends on MTD && ARCH_PXA
         help
           This enables access to the flash chip on the Sharp SL Series of PDAs.
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6e863aa9894c..b6c70c58ae99 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -32,7 +32,7 @@ config IFB
         tristate "Intermediate Functional Block support"
         depends on NET_CLS_ACT
         ---help---
-          This is an intermidiate driver that allows sharing of
+          This is an intermediate driver that allows sharing of
           resources.
           To compile this driver as a module, choose M here: the module
           will be called ifb.  If you want to use more than one ifb
@@ -2136,7 +2136,7 @@ config SK98LIN
           This driver supports the original Yukon chipset. A cleaner driver is 
           also available (skge) which seems to work better than this one.
 
-          This driver does not support the newer Yukon2 chipset. A seperate
+          This driver does not support the newer Yukon2 chipset. A separate
           driver, sky2, is provided to support Yukon2-based adapters.
 
           The following adapters are supported by this driver:
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index b79ec0d7480f..ecb61f876f27 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -61,8 +61,8 @@ config FIXED_PHY
         depends on PHYLIB
         ---help---
           Adds the driver to PHY layer to cover the boards that do not have any PHY bound,
-          but with the ability to manipulate with speed/link in software. The relavant MII
-          speed/duplex parameters could be effectively handled in user-specified  fuction.
+          but with the ability to manipulate the speed/link in software. The relevant MII
+          speed/duplex parameters could be effectively handled in a user-specified function.
           Currently tested with mpc866ads.
 
 config FIXED_MII_10_FDX
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 5f1b9f58070e..d0ba112355cc 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -27,7 +27,7 @@ config PCI_MULTITHREAD_PROBE
           smaller speedup on single processor machines.
 
           But it can also cause lots of bad things to happen.  A number
-          of PCI drivers can not properly handle running in this way,
+          of PCI drivers cannot properly handle running in this way,
           some will just not work properly at all, while others might
           decide to blow up power supplies with a huge load all at once,
           so use this option at your own risk.
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 23334c8bc4c7..d895a1adb428 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -16,7 +16,7 @@ config SPI
           controller and a chipselect.  Most SPI slaves don't support
           dynamic device discovery; some are even write-only or read-only.
 
-          SPI is widely used by microcontollers to talk with sensors,
+          SPI is widely used by microcontrollers to talk with sensors,
           eeprom and flash memory, codecs and various other controller
           chips, analog to digital (and d-to-a) converters, and more.
           MMC and SD cards can be accessed using SPI protocol; and for
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index cf10cbc98f80..cc60759083bf 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -153,7 +153,7 @@ config USB_U132_HCD
           adapter will *NOT* work with PC cards that do not contain an OHCI
           controller.
 
-          For those PC cards that contain multiple OHCI controllers only ther
+          For those PC cards that contain multiple OHCI controllers only the
           first one is used.
 
           The driver consists of two modules, the "ftdi-elan" module is a