3 files changed, 297 insertions, 0 deletions

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 37ee69f57a0b..94746cfac7b5 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -217,4 +217,14 @@ config RTC_DRV_TEST
           This driver can also be built as a module. If so, the module
           will be called rtc-test.
 
+config RTC_DRV_MAX6902
+        tristate "Maxim 6902"
+        depends on RTC_CLASS && SPI
+        help
+          If you say yes here you will get support for the
+          Maxim MAX6902 spi RTC chip.
+
+          This driver can also be built as a module. If so, the module
+          will be called rtc-max6902.
+
 endmenu
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 090f197f07e8..dd480d6bcdf8 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_RTC_DRV_EP93XX)	+= rtc-ep93xx.o
 obj-$(CONFIG_RTC_DRV_SA1100)    += rtc-sa1100.o
 obj-$(CONFIG_RTC_DRV_VR41XX)    += rtc-vr41xx.o
 obj-$(CONFIG_RTC_DRV_PL031)     += rtc-pl031.o
+obj-$(CONFIG_RTC_DRV_MAX6902)   += rtc-max6902.o
diff --git a/drivers/rtc/rtc-max6902.c b/drivers/rtc/rtc-max6902.c
new file mode 100644
index 000000000000..2c9739562b5c
--- /dev/null
+++ b/drivers/rtc/rtc-max6902.c
@@ -0,0 +1,286 @@
+/* drivers/char/max6902.c
+ *
+ * Copyright (C) 2006 8D Technologies inc.
+ * Copyright (C) 2004 Compulab Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for MAX6902 spi RTC
+ *
+ * Changelog:
+ *
+ * 24-May-2006: Raphael Assenat <raph@8d.com>
+ *                - Major rework
+ *                              Converted to rtc_device and uses the SPI layer.
+ *
+ * ??-???-2005: Someone at Compulab
+ *                - Initial driver creation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/version.h>
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+
+#define MAX6902_REG_SECONDS             0x01
+#define MAX6902_REG_MINUTES             0x03
+#define MAX6902_REG_HOURS               0x05
+#define MAX6902_REG_DATE                0x07
+#define MAX6902_REG_MONTH               0x09
+#define MAX6902_REG_DAY                 0x0B
+#define MAX6902_REG_YEAR                0x0D
+#define MAX6902_REG_CONTROL             0x0F
+#define MAX6902_REG_CENTURY             0x13
+
+#undef MAX6902_DEBUG
+
+struct max6902 {
+        struct rtc_device *rtc;
+        u8 buf[9]; /* Burst read cmd + 8 registers */
+        u8 tx_buf[2];
+        u8 rx_buf[2];
+};
+
+static void max6902_set_reg(struct device *dev, unsigned char address,
+                                unsigned char data)
+{
+        struct spi_device *spi = to_spi_device(dev);
+        unsigned char buf[2];
+
+        /* MSB must be '0' to write */
+        buf[0] = address & 0x7f;
+        buf[1] = data;
+
+        spi_write(spi, buf, 2);
+}
+
+static int max6902_get_reg(struct device *dev, unsigned char address,
+                                unsigned char *data)
+{
+        struct spi_device *spi = to_spi_device(dev);
+        struct max6902 *chip = dev_get_drvdata(dev);
+        struct spi_message message;
+        struct spi_transfer xfer;
+        int status;
+
+        if (!data)
+                return -EINVAL;
+
+        /* Build our spi message */
+        spi_message_init(&message);
+        memset(&xfer, 0, sizeof(xfer));
+        xfer.len = 2;
+        /* Can tx_buf and rx_buf be equal? The doc in spi.h is not sure... */
+        xfer.tx_buf = chip->tx_buf;
+        xfer.rx_buf = chip->rx_buf;
+
+        /* Set MSB to indicate read */
+        chip->tx_buf[0] = address | 0x80;
+
+        spi_message_add_tail(&xfer, &message);
+
+        /* do the i/o */
+        status = spi_sync(spi, &message);
+        if (status == 0)
+                status = message.status;
+        else
+                return status;
+
+        *data = chip->rx_buf[1];
+
+        return status;
+}
+
+static int max6902_get_datetime(struct device *dev, struct rtc_time *dt)
+{
+        unsigned char tmp;
+        int century;
+        int err;
+        struct spi_device *spi = to_spi_device(dev);
+        struct max6902 *chip = dev_get_drvdata(dev);
+        struct spi_message message;
+        struct spi_transfer xfer;
+        int status;
+
+        err = max6902_get_reg(dev, MAX6902_REG_CENTURY, &tmp);
+        if (err)
+                return err;
+
+        /* build the message */
+        spi_message_init(&message);
+        memset(&xfer, 0, sizeof(xfer));
+        xfer.len = 1 + 7;       /* Burst read command + 7 registers */
+        xfer.tx_buf = chip->buf;
+        xfer.rx_buf = chip->buf;
+        chip->buf[0] = 0xbf;    /* Burst read */
+        spi_message_add_tail(&xfer, &message);
+
+        /* do the i/o */
+        status = spi_sync(spi, &message);
+        if (status == 0)
+                status = message.status;
+        else
+                return status;
+
+        /* The chip sends data in this order:
+         * Seconds, Minutes, Hours, Date, Month, Day, Year */
+        dt->tm_sec      = BCD2BIN(chip->buf[1]);
+        dt->tm_min      = BCD2BIN(chip->buf[2]);
+        dt->tm_hour     = BCD2BIN(chip->buf[3]);
+        dt->tm_mday     = BCD2BIN(chip->buf[4]);
+        dt->tm_mon      = BCD2BIN(chip->buf[5] - 1);
+        dt->tm_wday     = BCD2BIN(chip->buf[6]);
+        dt->tm_year = BCD2BIN(chip->buf[7]);
+
+        century = BCD2BIN(tmp) * 100;
+
+        dt->tm_year += century;
+        dt->tm_year -= 1900;
+
+#ifdef MAX6902_DEBUG
+        printk("\n%s : Read RTC values\n",__FUNCTION__);
+        printk("tm_hour: %i\n",dt->tm_hour);
+        printk("tm_min : %i\n",dt->tm_min);
+        printk("tm_sec : %i\n",dt->tm_sec);
+        printk("tm_year: %i\n",dt->tm_year);
+        printk("tm_mon : %i\n",dt->tm_mon);
+        printk("tm_mday: %i\n",dt->tm_mday);
+        printk("tm_wday: %i\n",dt->tm_wday);
+#endif
+
+        return 0;
+}
+
+static int max6902_set_datetime(struct device *dev, struct rtc_time *dt)
+{
+        dt->tm_year = dt->tm_year+1900;
+
+#ifdef MAX6902_DEBUG
+        printk("\n%s : Setting RTC values\n",__FUNCTION__);
+        printk("tm_sec : %i\n",dt->tm_sec);
+        printk("tm_min : %i\n",dt->tm_min);
+        printk("tm_hour: %i\n",dt->tm_hour);
+        printk("tm_mday: %i\n",dt->tm_mday);
+        printk("tm_wday: %i\n",dt->tm_wday);
+        printk("tm_year: %i\n",dt->tm_year);
+#endif
+
+        /* Remove write protection */
+        max6902_set_reg(dev, 0xF, 0);
+
+        max6902_set_reg(dev, 0x01, BIN2BCD(dt->tm_sec));
+        max6902_set_reg(dev, 0x03, BIN2BCD(dt->tm_min));
+        max6902_set_reg(dev, 0x05, BIN2BCD(dt->tm_hour));
+
+        max6902_set_reg(dev, 0x07, BIN2BCD(dt->tm_mday));
+        max6902_set_reg(dev, 0x09, BIN2BCD(dt->tm_mon+1));
+        max6902_set_reg(dev, 0x0B, BIN2BCD(dt->tm_wday));
+        max6902_set_reg(dev, 0x0D, BIN2BCD(dt->tm_year%100));
+        max6902_set_reg(dev, 0x13, BIN2BCD(dt->tm_year/100));
+
+        /* Compulab used a delay here. However, the datasheet
+         * does not mention a delay being required anywhere... */
+        /* delay(2000); */
+
+        /* Write protect */
+        max6902_set_reg(dev, 0xF, 0x80);
+
+        return 0;
+}
+
+static int max6902_read_time(struct device *dev, struct rtc_time *tm)
+{
+        return max6902_get_datetime(dev, tm);
+}
+
+static int max6902_set_time(struct device *dev, struct rtc_time *tm)
+{
+        return max6902_set_datetime(dev, tm);
+}
+
+static struct rtc_class_ops max6902_rtc_ops = {
+        .read_time      = max6902_read_time,
+        .set_time       = max6902_set_time,
+};
+
+static int __devinit max6902_probe(struct spi_device *spi)
+{
+        struct rtc_device *rtc;
+        unsigned char tmp;
+        struct max6902 *chip;
+        int res;
+
+        rtc = rtc_device_register("max6902",
+                                &spi->dev, &max6902_rtc_ops, THIS_MODULE);
+        if (IS_ERR(rtc))
+                return PTR_ERR(rtc);
+
+        spi->mode = SPI_MODE_3;
+        spi->bits_per_word = 8;
+        spi_setup(spi);
+
+        chip = kzalloc(sizeof *chip, GFP_KERNEL);
+        if (!chip) {
+                rtc_device_unregister(rtc);
+                return -ENOMEM;
+        }
+        chip->rtc = rtc;
+        dev_set_drvdata(&spi->dev, chip);
+
+        res = max6902_get_reg(&spi->dev, MAX6902_REG_SECONDS, &tmp);
+        if (res) {
+                rtc_device_unregister(rtc);
+                return res;
+        }
+
+        return 0;
+}
+
+static int __devexit max6902_remove(struct spi_device *spi)
+{
+        struct max6902 *chip = platform_get_drvdata(spi);
+        struct rtc_device *rtc = chip->rtc;
+
+        if (rtc)
+                rtc_device_unregister(rtc);
+
+        kfree(chip);
+
+        return 0;
+}
+
+static struct spi_driver max6902_driver = {
+        .driver = {
+                .name   = "max6902",
+                .bus    = &spi_bus_type,
+                .owner  = THIS_MODULE,
+        },
+        .probe  = max6902_probe,
+        .remove = __devexit_p(max6902_remove),
+};
+
+static __init int max6902_init(void)
+{
+        printk("max6902 spi driver\n");
+        return spi_register_driver(&max6902_driver);
+}
+module_init(max6902_init);
+
+static __exit void max6902_exit(void)
+{
+        spi_unregister_driver(&max6902_driver);
+}
+module_exit(max6902_exit);
+
+MODULE_DESCRIPTION ("max6902 spi RTC driver");
+MODULE_AUTHOR ("Raphael Assenat");
+MODULE_LICENSE ("GPL");