1 files changed, 88 insertions, 38 deletions

diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index dddd2acce76f..61f6024b61ba 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -5,6 +5,7 @@
  * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002)
  *   by D. Gilbert and aeb (20020609)
  * Additions for SPC-3 T10/1416-D Rev 21 22 Sept 2004, D. Gilbert 20041025
+ * Update to SPC-4 T10/1713-D Rev 5a, 14 June 2006, D. Gilbert 20060702
  */
 
 #include <linux/blkdev.h>
@@ -36,55 +37,56 @@ static const char * cdb_byte0_names[] = {
 /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
 /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
             "Reasssign Blocks",
-/* 08-0d */ "Read (6)", NULL, "Write (6)", "Seek (6)", NULL, NULL,
+/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
 /* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",  
-/* 13-16 */ "Verify (6)", "Recover Buffered Data", "Mode Select (6)",
-            "Reserve (6)",
-/* 17-1a */ "Release (6)", "Copy", "Erase", "Mode Sense (6)", 
+/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
+            "Reserve(6)",
+/* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)",
 /* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic", 
 /* 1e-1f */ "Prevent/Allow Medium Removal", NULL,
 /* 20-22 */  NULL, NULL, NULL,
 /* 23-28 */ "Read Format Capacities", "Set Window",
-            "Read Capacity (10)", NULL, NULL, "Read (10)", 
-/* 29-2d */ "Read Generation", "Write (10)", "Seek (10)", "Erase (10)", 
-            "Read updated block", 
-/* 2e-31 */ "Write Verify (10)", "Verify (10)", "Search High", "Search Equal", 
+            "Read Capacity(10)", NULL, NULL, "Read(10)",
+/* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)",
+            "Read updated block",
+/* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal",
 /* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position", 
-/* 35-37 */ "Synchronize Cache (10)", "Lock/Unlock Cache (10)",
+/* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)",
             "Read Defect Data(10)", 
 /* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer", 
             "Read Buffer", 
-/* 3d-3f */ "Update Block", "Read Long (10)",  "Write Long (10)",
-/* 40-41 */ "Change Definition", "Write Same (10)",
+/* 3d-3f */ "Update Block", "Read Long(10)",  "Write Long(10)",
+/* 40-41 */ "Change Definition", "Write Same(10)",
 /* 42-48 */ "Read sub-channel", "Read TOC/PMA/ATIP", "Read density support",
-            "Play audio (10)", "Get configuration", "Play audio msf",
+            "Play audio(10)", "Get configuration", "Play audio msf",
             "Play audio track/index",
-/* 49-4f */ "Play track relative (10)", "Get event status notification",
+/* 49-4f */ "Play track relative(10)", "Get event status notification",
             "Pause/resume", "Log Select", "Log Sense", "Stop play/scan",
             NULL,
 /* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info",
-            "Reserve track", "Send OPC info", "Mode Select (10)",
-/* 56-5b */ "Reserve (10)", "Release (10)", "Repair track", "Read master cue",
-            "Mode Sense (10)", "Close track/session",
+            "Reserve track", "Send OPC info", "Mode Select(10)",
+/* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue",
+            "Mode Sense(10)", "Close track/session",
 /* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in",
             "Persistent reserve out",
 /* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 /* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 /* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 /* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, "Variable length",
-/* 80-84 */ "Xdwrite (16)", "Rebuild (16)", "Regenerate (16)", "Extended copy",
+/* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", "Extended copy",
             "Receive copy results",
-/* 85-89 */ "Memory Export In (16)", "Access control in", "Access control out",
-            "Read (16)", "Memory Export Out (16)",
-/* 8a-8f */ "Write (16)", NULL, "Read attributes", "Write attributes",
-            "Write and verify (16)", "Verify (16)",
-/* 90-94 */ "Pre-fetch (16)", "Synchronize cache (16)",
-            "Lock/unlock cache (16)", "Write same (16)", NULL,
+/* 85-89 */ "ATA command pass through(16)", "Access control in",
+            "Access control out", "Read(16)", "Memory Export Out(16)",
+/* 8a-8f */ "Write(16)", NULL, "Read attributes", "Write attributes",
+            "Write and verify(16)", "Verify(16)",
+/* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)",
+            "Lock/unlock cache(16)", "Write same(16)", NULL,
 /* 95-99 */ NULL, NULL, NULL, NULL, NULL,
-/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in (16)",
-            "Service action out (16)",
-/* a0-a5 */ "Report luns", "Blank", "Send event", "Maintenance in",
-            "Maintenance out", "Move medium/play audio(12)",
+/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in(16)",
+            "Service action out(16)",
+/* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank",
+            "Security protocol in", "Maintenance in", "Maintenance out",
+            "Move medium/play audio(12)",
 /* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)",
             "Play track relative(12)",
 /* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance",
@@ -92,12 +94,12 @@ static const char * cdb_byte0_names[] = {
 /* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)",
 /* b2-b4 */ "Search data low(12)", "Set limits(12)",
             "Read element status attached",
-/* b5-b6 */ "Request volume element address", "Send volume tag, set streaming",
+/* b5-b6 */ "Security protocol out", "Send volume tag, set streaming",
 /* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf",
 /* ba-bc */ "Redundancy group (in), Scan",
-            "Redundancy group (out), Set cd-rom speed", "Spare in, Play cd",
-/* bd-bf */ "Spare out, Mechanism status", "Volume set in, Read cd",
-            "Volume set out, Send DVD structure",
+            "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd",
+/* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd",
+            "Volume set (out), Send DVD structure",
 };
 
 struct value_name_pair {
@@ -112,6 +114,7 @@ static const struct value_name_pair maint_in_arr[] = {
         {0xc, "Report supported operation codes"},
         {0xd, "Report supported task management functions"},
         {0xe, "Report priority"},
+        {0xf, "Report timestamp"},
 };
 #define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr)
 
@@ -120,6 +123,7 @@ static const struct value_name_pair maint_out_arr[] = {
         {0xa, "Set target port groups"},
         {0xb, "Change aliases"},
         {0xe, "Set priority"},
+        {0xe, "Set timestamp"},
 };
 #define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr)
 
@@ -427,6 +431,7 @@ static struct error_info additional[] =
         {0x001A, "Rewind operation in progress"},
         {0x001B, "Set capacity operation in progress"},
         {0x001C, "Verify operation in progress"},
+        {0x001D, "ATA pass through information available"},
 
         {0x0100, "No index/sector signal"},
 
@@ -438,7 +443,7 @@ static struct error_info additional[] =
 
         {0x0400, "Logical unit not ready, cause not reportable"},
         {0x0401, "Logical unit is in process of becoming ready"},
-        {0x0402, "Logical unit not ready, initializing cmd. required"},
+        {0x0402, "Logical unit not ready, initializing command required"},
         {0x0403, "Logical unit not ready, manual intervention required"},
         {0x0404, "Logical unit not ready, format in progress"},
         {0x0405, "Logical unit not ready, rebuild in progress"},
@@ -478,6 +483,9 @@ static struct error_info additional[] =
         {0x0B00, "Warning"},
         {0x0B01, "Warning - specified temperature exceeded"},
         {0x0B02, "Warning - enclosure degraded"},
+        {0x0B03, "Warning - background self-test failed"},
+        {0x0B04, "Warning - background pre-scan detected medium error"},
+        {0x0B05, "Warning - background medium scan detected medium error"},
 
         {0x0C00, "Write error"},
         {0x0C01, "Write error - recovered with auto reallocation"},
@@ -493,6 +501,7 @@ static struct error_info additional[] =
         {0x0C0B, "Auxiliary memory write error"},
         {0x0C0C, "Write error - unexpected unsolicited data"},
         {0x0C0D, "Write error - not enough unsolicited data"},
+        {0x0C0F, "Defects in error window"},
 
         {0x0D00, "Error detected by third party temporary initiator"},
         {0x0D01, "Third party device failure"},
@@ -504,11 +513,12 @@ static struct error_info additional[] =
         {0x0E00, "Invalid information unit"},
         {0x0E01, "Information unit too short"},
         {0x0E02, "Information unit too long"},
+        {0x0E03, "Invalid field in command information unit"},
 
         {0x1000, "Id CRC or ECC error"},
-        {0x1001, "Data block guard check failed"},
-        {0x1002, "Data block application tag check failed"},
-        {0x1003, "Data block reference tag check failed"},
+        {0x1001, "Logical block guard check failed"},
+        {0x1002, "Logical block application tag check failed"},
+        {0x1003, "Logical block reference tag check failed"},
 
         {0x1100, "Unrecovered read error"},
         {0x1101, "Read retries exhausted"},
@@ -530,6 +540,7 @@ static struct error_info additional[] =
         {0x1111, "Read error - loss of streaming"},
         {0x1112, "Auxiliary memory read error"},
         {0x1113, "Read error - failed retransmission request"},
+        {0x1114, "Read error - lba marked bad by application client"},
 
         {0x1200, "Address mark not found for id field"},
 
@@ -610,11 +621,14 @@ static struct error_info additional[] =
         {0x2100, "Logical block address out of range"},
         {0x2101, "Invalid element address"},
         {0x2102, "Invalid address for write"},
+        {0x2103, "Invalid write crossing layer jump"},
 
         {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
 
         {0x2400, "Invalid field in cdb"},
         {0x2401, "CDB decryption error"},
+        {0x2402, "Obsolete"},
+        {0x2403, "Obsolete"},
         {0x2404, "Security audit value frozen"},
         {0x2405, "Security working key frozen"},
         {0x2406, "Nonce not unique"},
@@ -637,7 +651,10 @@ static struct error_info additional[] =
         {0x260C, "Invalid operation for copy source or destination"},
         {0x260D, "Copy segment granularity violation"},
         {0x260E, "Invalid parameter while port is enabled"},
-        {0x260F, "Invalid data-out buffer integrity"},
+        {0x260F, "Invalid data-out buffer integrity check value"},
+        {0x2610, "Data decryption key fail limit reached"},
+        {0x2611, "Incomplete key-associated data set"},
+        {0x2612, "Vendor specific key reference not found"},
 
         {0x2700, "Write protected"},
         {0x2701, "Hardware write protected"},
@@ -649,6 +666,7 @@ static struct error_info additional[] =
 
         {0x2800, "Not ready to ready change, medium may have changed"},
         {0x2801, "Import or export element accessed"},
+        {0x2802, "Format-layer may have changed"},
 
         {0x2900, "Power on, reset, or bus device reset occurred"},
         {0x2901, "Power on occurred"},
@@ -669,6 +687,11 @@ static struct error_info additional[] =
         {0x2A07, "Implicit asymmetric access state transition failed"},
         {0x2A08, "Priority changed"},
         {0x2A09, "Capacity data has changed"},
+        {0x2A10, "Timestamp changed"},
+        {0x2A11, "Data encryption parameters changed by another i_t nexus"},
+        {0x2A12, "Data encryption parameters changed by vendor specific "
+                 "event"},
+        {0x2A13, "Data encryption key instance counter has changed"},
 
         {0x2B00, "Copy cannot execute since host cannot disconnect"},
 
@@ -690,6 +713,7 @@ static struct error_info additional[] =
         {0x2E00, "Insufficient time for operation"},
 
         {0x2F00, "Commands cleared by another initiator"},
+        {0x2F01, "Commands cleared by power loss notification"},
 
         {0x3000, "Incompatible medium installed"},
         {0x3001, "Cannot read medium - unknown format"},
@@ -702,7 +726,8 @@ static struct error_info additional[] =
         {0x3008, "Cannot write - application code mismatch"},
         {0x3009, "Current session not fixated for append"},
         {0x300A, "Cleaning request rejected"},
-        {0x300C, "WORM medium, overwrite attempted"},
+        {0x300C, "WORM medium - overwrite attempted"},
+        {0x300D, "WORM medium - integrity check"},
         {0x3010, "Medium not formatted"},
 
         {0x3100, "Medium format corrupted"},
@@ -790,6 +815,9 @@ static struct error_info additional[] =
         {0x3F0F, "Echo buffer overwritten"},
         {0x3F10, "Medium loadable"},
         {0x3F11, "Medium auxiliary memory accessible"},
+        {0x3F12, "iSCSI IP address added"},
+        {0x3F13, "iSCSI IP address removed"},
+        {0x3F14, "iSCSI IP address changed"},
 /*
  *      {0x40NN, "Ram failure"},
  *      {0x40NN, "Diagnostic failure on component nn"},
@@ -799,6 +827,7 @@ static struct error_info additional[] =
         {0x4300, "Message error"},
 
         {0x4400, "Internal target failure"},
+        {0x4471, "ATA device failed set features"},
 
         {0x4500, "Select or reselect failure"},
 
@@ -807,9 +836,10 @@ static struct error_info additional[] =
         {0x4700, "Scsi parity error"},
         {0x4701, "Data phase CRC error detected"},
         {0x4702, "Scsi parity error detected during st data phase"},
-        {0x4703, "Information unit CRC error detected"},
+        {0x4703, "Information unit iuCRC error detected"},
         {0x4704, "Asynchronous information protection error detected"},
         {0x4705, "Protocol service CRC error"},
+        {0x4706, "Phy test function in progress"},
         {0x477f, "Some commands cleared by iSCSI Protocol event"},
 
         {0x4800, "Initiator detected error message received"},
@@ -844,6 +874,8 @@ static struct error_info additional[] =
         {0x5300, "Media load or eject failed"},
         {0x5301, "Unload tape failure"},
         {0x5302, "Medium removal prevented"},
+        {0x5303, "Medium removal prevented by data transfer element"},
+        {0x5304, "Medium thread or unthread failure"},
 
         {0x5400, "Scsi to host system interface failure"},
 
@@ -855,6 +887,7 @@ static struct error_info additional[] =
         {0x5505, "Insufficient access control resources"},
         {0x5506, "Auxiliary memory out of space"},
         {0x5507, "Quota error"},
+        {0x5508, "Maximum number of supplemental decryption keys exceeded"},
 
         {0x5700, "Unable to recover table-of-contents"},
 
@@ -1004,6 +1037,7 @@ static struct error_info additional[] =
         {0x6708, "Assign failure occurred"},
         {0x6709, "Multiply assigned logical unit"},
         {0x670A, "Set target port groups command failed"},
+        {0x670B, "ATA device feature not enabled"},
 
         {0x6800, "Logical unit not configured"},
 
@@ -1030,6 +1064,8 @@ static struct error_info additional[] =
         {0x6F03, "Read of scrambled sector without authentication"},
         {0x6F04, "Media region code is mismatched to logical unit region"},
         {0x6F05, "Drive region must be permanent/region reset count error"},
+        {0x6F06, "Insufficient block count for binding nonce recording"},
+        {0x6F07, "Conflict in binding nonce recording"},
 /*
  *      {0x70NN, "Decompression exception short algorithm id of nn"},
  */
@@ -1041,6 +1077,8 @@ static struct error_info additional[] =
         {0x7203, "Session fixation error - incomplete track in session"},
         {0x7204, "Empty or partially written reserved track"},
         {0x7205, "No more track reservations allowed"},
+        {0x7206, "RMZ extension is not allowed"},
+        {0x7207, "No more test zone extensions are allowed"},
 
         {0x7300, "Cd control error"},
         {0x7301, "Power calibration area almost full"},
@@ -1049,6 +1087,18 @@ static struct error_info additional[] =
         {0x7304, "Program memory area update failure"},
         {0x7305, "Program memory area is full"},
         {0x7306, "RMA/PMA is almost full"},
+        {0x7310, "Current power calibration area almost full"},
+        {0x7311, "Current power calibration area is full"},
+        {0x7317, "RDZ is full"},
+
+        {0x7400, "Security error"},
+        {0x7401, "Unable to decrypt data"},
+        {0x7402, "Unencrypted data encountered while decrypting"},
+        {0x7403, "Incorrect data encryption key"},
+        {0x7404, "Cryptographic integrity validation failed"},
+        {0x7405, "Error decrypting data"},
+        {0x7471, "Logical unit access not authorized"},
+
         {0, NULL}
 };