diff options
Diffstat (limited to 'drivers')
107 files changed, 1099 insertions, 712 deletions
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index a0a178dd189c..1423b0c0cd2e 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c | |||
@@ -174,15 +174,6 @@ static int acpi_battery_get_property(struct power_supply *psy, | |||
174 | break; | 174 | break; |
175 | case POWER_SUPPLY_PROP_CURRENT_NOW: | 175 | case POWER_SUPPLY_PROP_CURRENT_NOW: |
176 | val->intval = battery->current_now * 1000; | 176 | val->intval = battery->current_now * 1000; |
177 | /* if power units are mW, convert to mA by | ||
178 | dividing by current voltage (mV/1000) */ | ||
179 | if (!battery->power_unit) { | ||
180 | if (battery->voltage_now) { | ||
181 | val->intval /= battery->voltage_now; | ||
182 | val->intval *= 1000; | ||
183 | } else | ||
184 | val->intval = -1; | ||
185 | } | ||
186 | break; | 177 | break; |
187 | case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: | 178 | case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: |
188 | case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: | 179 | case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: |
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 78fbec8ceda0..421b7c71e72d 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig | |||
@@ -153,7 +153,7 @@ config SATA_PROMISE | |||
153 | If unsure, say N. | 153 | If unsure, say N. |
154 | 154 | ||
155 | config SATA_SX4 | 155 | config SATA_SX4 |
156 | tristate "Promise SATA SX4 support" | 156 | tristate "Promise SATA SX4 support (Experimental)" |
157 | depends on PCI && EXPERIMENTAL | 157 | depends on PCI && EXPERIMENTAL |
158 | help | 158 | help |
159 | This option enables support for Promise Serial ATA SX4. | 159 | This option enables support for Promise Serial ATA SX4. |
@@ -219,8 +219,8 @@ config PATA_ACPI | |||
219 | otherwise unsupported hardware. | 219 | otherwise unsupported hardware. |
220 | 220 | ||
221 | config PATA_ALI | 221 | config PATA_ALI |
222 | tristate "ALi PATA support (Experimental)" | 222 | tristate "ALi PATA support" |
223 | depends on PCI && EXPERIMENTAL | 223 | depends on PCI |
224 | help | 224 | help |
225 | This option enables support for the ALi ATA interfaces | 225 | This option enables support for the ALi ATA interfaces |
226 | found on the many ALi chipsets. | 226 | found on the many ALi chipsets. |
@@ -263,7 +263,7 @@ config PATA_ATIIXP | |||
263 | If unsure, say N. | 263 | If unsure, say N. |
264 | 264 | ||
265 | config PATA_CMD640_PCI | 265 | config PATA_CMD640_PCI |
266 | tristate "CMD640 PCI PATA support (Very Experimental)" | 266 | tristate "CMD640 PCI PATA support (Experimental)" |
267 | depends on PCI && EXPERIMENTAL | 267 | depends on PCI && EXPERIMENTAL |
268 | help | 268 | help |
269 | This option enables support for the CMD640 PCI IDE | 269 | This option enables support for the CMD640 PCI IDE |
@@ -291,8 +291,8 @@ config PATA_CS5520 | |||
291 | If unsure, say N. | 291 | If unsure, say N. |
292 | 292 | ||
293 | config PATA_CS5530 | 293 | config PATA_CS5530 |
294 | tristate "CS5530 PATA support (Experimental)" | 294 | tristate "CS5530 PATA support" |
295 | depends on PCI && EXPERIMENTAL | 295 | depends on PCI |
296 | help | 296 | help |
297 | This option enables support for the Cyrix/NatSemi/AMD CS5530 | 297 | This option enables support for the Cyrix/NatSemi/AMD CS5530 |
298 | companion chip used with the MediaGX/Geode processor family. | 298 | companion chip used with the MediaGX/Geode processor family. |
@@ -309,8 +309,8 @@ config PATA_CS5535 | |||
309 | If unsure, say N. | 309 | If unsure, say N. |
310 | 310 | ||
311 | config PATA_CS5536 | 311 | config PATA_CS5536 |
312 | tristate "CS5536 PATA support (Experimental)" | 312 | tristate "CS5536 PATA support" |
313 | depends on PCI && X86 && !X86_64 && EXPERIMENTAL | 313 | depends on PCI && X86 && !X86_64 |
314 | help | 314 | help |
315 | This option enables support for the AMD CS5536 | 315 | This option enables support for the AMD CS5536 |
316 | companion chip used with the Geode LX processor family. | 316 | companion chip used with the Geode LX processor family. |
@@ -363,7 +363,7 @@ config PATA_HPT37X | |||
363 | If unsure, say N. | 363 | If unsure, say N. |
364 | 364 | ||
365 | config PATA_HPT3X2N | 365 | config PATA_HPT3X2N |
366 | tristate "HPT 372N/302N PATA support (Very Experimental)" | 366 | tristate "HPT 372N/302N PATA support (Experimental)" |
367 | depends on PCI && EXPERIMENTAL | 367 | depends on PCI && EXPERIMENTAL |
368 | help | 368 | help |
369 | This option enables support for the N variant HPT PATA | 369 | This option enables support for the N variant HPT PATA |
@@ -389,8 +389,8 @@ config PATA_HPT3X3_DMA | |||
389 | problems with DMA on this chipset. | 389 | problems with DMA on this chipset. |
390 | 390 | ||
391 | config PATA_ISAPNP | 391 | config PATA_ISAPNP |
392 | tristate "ISA Plug and Play PATA support (Experimental)" | 392 | tristate "ISA Plug and Play PATA support" |
393 | depends on EXPERIMENTAL && ISAPNP | 393 | depends on ISAPNP |
394 | help | 394 | help |
395 | This option enables support for ISA plug & play ATA | 395 | This option enables support for ISA plug & play ATA |
396 | controllers such as those found on old soundcards. | 396 | controllers such as those found on old soundcards. |
@@ -498,8 +498,8 @@ config PATA_NINJA32 | |||
498 | If unsure, say N. | 498 | If unsure, say N. |
499 | 499 | ||
500 | config PATA_NS87410 | 500 | config PATA_NS87410 |
501 | tristate "Nat Semi NS87410 PATA support (Experimental)" | 501 | tristate "Nat Semi NS87410 PATA support" |
502 | depends on PCI && EXPERIMENTAL | 502 | depends on PCI |
503 | help | 503 | help |
504 | This option enables support for the National Semiconductor | 504 | This option enables support for the National Semiconductor |
505 | NS87410 PCI-IDE controller. | 505 | NS87410 PCI-IDE controller. |
@@ -507,8 +507,8 @@ config PATA_NS87410 | |||
507 | If unsure, say N. | 507 | If unsure, say N. |
508 | 508 | ||
509 | config PATA_NS87415 | 509 | config PATA_NS87415 |
510 | tristate "Nat Semi NS87415 PATA support (Experimental)" | 510 | tristate "Nat Semi NS87415 PATA support" |
511 | depends on PCI && EXPERIMENTAL | 511 | depends on PCI |
512 | help | 512 | help |
513 | This option enables support for the National Semiconductor | 513 | This option enables support for the National Semiconductor |
514 | NS87415 PCI-IDE controller. | 514 | NS87415 PCI-IDE controller. |
@@ -544,8 +544,8 @@ config PATA_PCMCIA | |||
544 | If unsure, say N. | 544 | If unsure, say N. |
545 | 545 | ||
546 | config PATA_PDC_OLD | 546 | config PATA_PDC_OLD |
547 | tristate "Older Promise PATA controller support (Experimental)" | 547 | tristate "Older Promise PATA controller support" |
548 | depends on PCI && EXPERIMENTAL | 548 | depends on PCI |
549 | help | 549 | help |
550 | This option enables support for the Promise 20246, 20262, 20263, | 550 | This option enables support for the Promise 20246, 20262, 20263, |
551 | 20265 and 20267 adapters. | 551 | 20265 and 20267 adapters. |
@@ -559,7 +559,7 @@ config PATA_QDI | |||
559 | Support for QDI 6500 and 6580 PATA controllers on VESA local bus. | 559 | Support for QDI 6500 and 6580 PATA controllers on VESA local bus. |
560 | 560 | ||
561 | config PATA_RADISYS | 561 | config PATA_RADISYS |
562 | tristate "RADISYS 82600 PATA support (Very Experimental)" | 562 | tristate "RADISYS 82600 PATA support (Experimental)" |
563 | depends on PCI && EXPERIMENTAL | 563 | depends on PCI && EXPERIMENTAL |
564 | help | 564 | help |
565 | This option enables support for the RADISYS 82600 | 565 | This option enables support for the RADISYS 82600 |
@@ -586,8 +586,8 @@ config PATA_RZ1000 | |||
586 | If unsure, say N. | 586 | If unsure, say N. |
587 | 587 | ||
588 | config PATA_SC1200 | 588 | config PATA_SC1200 |
589 | tristate "SC1200 PATA support (Very Experimental)" | 589 | tristate "SC1200 PATA support" |
590 | depends on PCI && EXPERIMENTAL | 590 | depends on PCI |
591 | help | 591 | help |
592 | This option enables support for the NatSemi/AMD SC1200 SoC | 592 | This option enables support for the NatSemi/AMD SC1200 SoC |
593 | companion chip used with the Geode processor family. | 593 | companion chip used with the Geode processor family. |
@@ -620,8 +620,8 @@ config PATA_SIL680 | |||
620 | If unsure, say N. | 620 | If unsure, say N. |
621 | 621 | ||
622 | config PATA_SIS | 622 | config PATA_SIS |
623 | tristate "SiS PATA support (Experimental)" | 623 | tristate "SiS PATA support" |
624 | depends on PCI && EXPERIMENTAL | 624 | depends on PCI |
625 | help | 625 | help |
626 | This option enables support for SiS PATA controllers | 626 | This option enables support for SiS PATA controllers |
627 | 627 | ||
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index d6d97d8f3fa4..c11936e13dd3 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c | |||
@@ -1072,7 +1072,14 @@ static int piix_broken_suspend(void) | |||
1072 | * matching is necessary because dmi_system_id.matches is | 1072 | * matching is necessary because dmi_system_id.matches is |
1073 | * limited to four entries. | 1073 | * limited to four entries. |
1074 | */ | 1074 | */ |
1075 | if (!strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") && | 1075 | if (dmi_get_system_info(DMI_SYS_VENDOR) && |
1076 | dmi_get_system_info(DMI_PRODUCT_NAME) && | ||
1077 | dmi_get_system_info(DMI_PRODUCT_VERSION) && | ||
1078 | dmi_get_system_info(DMI_PRODUCT_SERIAL) && | ||
1079 | dmi_get_system_info(DMI_BOARD_VENDOR) && | ||
1080 | dmi_get_system_info(DMI_BOARD_NAME) && | ||
1081 | dmi_get_system_info(DMI_BOARD_VERSION) && | ||
1082 | !strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") && | ||
1076 | !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") && | 1083 | !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") && |
1077 | !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") && | 1084 | !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") && |
1078 | !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") && | 1085 | !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") && |
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index f2b83eabc7c7..a098ba8eaab6 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c | |||
@@ -382,10 +382,10 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |||
382 | /* PCI clocking determines the ATA timing values to use */ | 382 | /* PCI clocking determines the ATA timing values to use */ |
383 | /* info_hpt366 is safe against re-entry so we can scribble on it */ | 383 | /* info_hpt366 is safe against re-entry so we can scribble on it */ |
384 | switch((reg1 & 0x700) >> 8) { | 384 | switch((reg1 & 0x700) >> 8) { |
385 | case 5: | 385 | case 9: |
386 | hpriv = &hpt366_40; | 386 | hpriv = &hpt366_40; |
387 | break; | 387 | break; |
388 | case 9: | 388 | case 5: |
389 | hpriv = &hpt366_25; | 389 | hpriv = &hpt366_25; |
390 | break; | 390 | break; |
391 | default: | 391 | default: |
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 4e466eae8b46..4dd9a3b031e4 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c | |||
@@ -44,7 +44,7 @@ | |||
44 | #include <linux/libata.h> | 44 | #include <linux/libata.h> |
45 | 45 | ||
46 | #define DRV_NAME "pata_ninja32" | 46 | #define DRV_NAME "pata_ninja32" |
47 | #define DRV_VERSION "0.1.1" | 47 | #define DRV_VERSION "0.1.3" |
48 | 48 | ||
49 | 49 | ||
50 | /** | 50 | /** |
@@ -130,7 +130,8 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |||
130 | return rc; | 130 | return rc; |
131 | pci_set_master(dev); | 131 | pci_set_master(dev); |
132 | 132 | ||
133 | /* Set up the register mappings */ | 133 | /* Set up the register mappings. We use the I/O mapping as only the |
134 | older chips also have MMIO on BAR 1 */ | ||
134 | base = host->iomap[0]; | 135 | base = host->iomap[0]; |
135 | if (!base) | 136 | if (!base) |
136 | return -ENOMEM; | 137 | return -ENOMEM; |
@@ -167,8 +168,12 @@ static int ninja32_reinit_one(struct pci_dev *pdev) | |||
167 | #endif | 168 | #endif |
168 | 169 | ||
169 | static const struct pci_device_id ninja32[] = { | 170 | static const struct pci_device_id ninja32[] = { |
171 | { 0x10FC, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | ||
172 | { 0x1145, 0x8008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | ||
173 | { 0x1145, 0xf008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | ||
170 | { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | 174 | { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
171 | { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | 175 | { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
176 | { 0x1145, 0xf02C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | ||
172 | { }, | 177 | { }, |
173 | }; | 178 | }; |
174 | 179 | ||
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index d34236611752..e4be55e047f6 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c | |||
@@ -56,7 +56,6 @@ static const struct sis_laptop sis_laptop[] = { | |||
56 | { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ | 56 | { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ |
57 | { 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */ | 57 | { 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */ |
58 | { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ | 58 | { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ |
59 | { 0x5513, 0x1039, 0x5513 }, /* Targa Visionary 1000 */ | ||
60 | /* end marker */ | 59 | /* end marker */ |
61 | { 0, } | 60 | { 0, } |
62 | }; | 61 | }; |
diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c index 615412364e99..6b969f8c684f 100644 --- a/drivers/atm/horizon.c +++ b/drivers/atm/horizon.c | |||
@@ -2705,7 +2705,7 @@ static int __devinit hrz_probe(struct pci_dev *pci_dev, const struct pci_device_ | |||
2705 | 2705 | ||
2706 | /* XXX DEV_LABEL is a guess */ | 2706 | /* XXX DEV_LABEL is a guess */ |
2707 | if (!request_region(iobase, HRZ_IO_EXTENT, DEV_LABEL)) { | 2707 | if (!request_region(iobase, HRZ_IO_EXTENT, DEV_LABEL)) { |
2708 | return -EINVAL; | 2708 | err = -EINVAL; |
2709 | goto out_disable; | 2709 | goto out_disable; |
2710 | } | 2710 | } |
2711 | 2711 | ||
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index f20bf359b84f..dc7a8c352da2 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c | |||
@@ -302,7 +302,7 @@ static struct kobj_type kobj_pkt_type_wqueue = { | |||
302 | static void pkt_sysfs_dev_new(struct pktcdvd_device *pd) | 302 | static void pkt_sysfs_dev_new(struct pktcdvd_device *pd) |
303 | { | 303 | { |
304 | if (class_pktcdvd) { | 304 | if (class_pktcdvd) { |
305 | pd->dev = device_create(class_pktcdvd, NULL, pd->pkt_dev, NULL, | 305 | pd->dev = device_create(class_pktcdvd, NULL, MKDEV(0, 0), NULL, |
306 | "%s", pd->name); | 306 | "%s", pd->name); |
307 | if (IS_ERR(pd->dev)) | 307 | if (IS_ERR(pd->dev)) |
308 | pd->dev = NULL; | 308 | pd->dev = NULL; |
@@ -2790,7 +2790,7 @@ static int pkt_new_dev(struct pktcdvd_device *pd, dev_t dev) | |||
2790 | return 0; | 2790 | return 0; |
2791 | 2791 | ||
2792 | out_mem: | 2792 | out_mem: |
2793 | blkdev_put(bdev, FMODE_READ|FMODE_WRITE); | 2793 | blkdev_put(bdev, FMODE_READ | FMODE_NDELAY); |
2794 | /* This is safe: open() is still holding a reference. */ | 2794 | /* This is safe: open() is still holding a reference. */ |
2795 | module_put(THIS_MODULE); | 2795 | module_put(THIS_MODULE); |
2796 | return ret; | 2796 | return ret; |
@@ -2975,7 +2975,7 @@ static int pkt_remove_dev(dev_t pkt_dev) | |||
2975 | pkt_debugfs_dev_remove(pd); | 2975 | pkt_debugfs_dev_remove(pd); |
2976 | pkt_sysfs_dev_remove(pd); | 2976 | pkt_sysfs_dev_remove(pd); |
2977 | 2977 | ||
2978 | blkdev_put(pd->bdev, FMODE_READ|FMODE_WRITE); | 2978 | blkdev_put(pd->bdev, FMODE_READ | FMODE_NDELAY); |
2979 | 2979 | ||
2980 | remove_proc_entry(pd->name, pkt_proc); | 2980 | remove_proc_entry(pd->name, pkt_proc); |
2981 | DPRINTK(DRIVER_NAME": writer %s unmapped\n", pd->name); | 2981 | DPRINTK(DRIVER_NAME": writer %s unmapped\n", pd->name); |
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 3b23270eaa65..a8f15e6be594 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c | |||
@@ -418,7 +418,7 @@ static irqreturn_t cd2401_rxerr_interrupt(int irq, void *dev_id) | |||
418 | TTY_OVERRUN); | 418 | TTY_OVERRUN); |
419 | /* | 419 | /* |
420 | If the flip buffer itself is | 420 | If the flip buffer itself is |
421 | overflowing, we still loose | 421 | overflowing, we still lose |
422 | the next incoming character. | 422 | the next incoming character. |
423 | */ | 423 | */ |
424 | if (tty_buffer_request_room(tty, 1) != | 424 | if (tty_buffer_request_room(tty, 1) != |
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 46610b090415..ab9c01e462ef 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c | |||
@@ -974,6 +974,7 @@ at_context_queue_packet(struct context *ctx, struct fw_packet *packet) | |||
974 | packet->ack = RCODE_SEND_ERROR; | 974 | packet->ack = RCODE_SEND_ERROR; |
975 | return -1; | 975 | return -1; |
976 | } | 976 | } |
977 | packet->payload_bus = payload_bus; | ||
977 | 978 | ||
978 | d[2].req_count = cpu_to_le16(packet->payload_length); | 979 | d[2].req_count = cpu_to_le16(packet->payload_length); |
979 | d[2].data_address = cpu_to_le32(payload_bus); | 980 | d[2].data_address = cpu_to_le32(payload_bus); |
@@ -1025,7 +1026,6 @@ static int handle_at_packet(struct context *context, | |||
1025 | struct driver_data *driver_data; | 1026 | struct driver_data *driver_data; |
1026 | struct fw_packet *packet; | 1027 | struct fw_packet *packet; |
1027 | struct fw_ohci *ohci = context->ohci; | 1028 | struct fw_ohci *ohci = context->ohci; |
1028 | dma_addr_t payload_bus; | ||
1029 | int evt; | 1029 | int evt; |
1030 | 1030 | ||
1031 | if (last->transfer_status == 0) | 1031 | if (last->transfer_status == 0) |
@@ -1038,9 +1038,8 @@ static int handle_at_packet(struct context *context, | |||
1038 | /* This packet was cancelled, just continue. */ | 1038 | /* This packet was cancelled, just continue. */ |
1039 | return 1; | 1039 | return 1; |
1040 | 1040 | ||
1041 | payload_bus = le32_to_cpu(last->data_address); | 1041 | if (packet->payload_bus) |
1042 | if (payload_bus != 0) | 1042 | dma_unmap_single(ohci->card.device, packet->payload_bus, |
1043 | dma_unmap_single(ohci->card.device, payload_bus, | ||
1044 | packet->payload_length, DMA_TO_DEVICE); | 1043 | packet->payload_length, DMA_TO_DEVICE); |
1045 | 1044 | ||
1046 | evt = le16_to_cpu(last->transfer_status) & 0x1f; | 1045 | evt = le16_to_cpu(last->transfer_status) & 0x1f; |
@@ -1697,6 +1696,10 @@ static int ohci_cancel_packet(struct fw_card *card, struct fw_packet *packet) | |||
1697 | if (packet->ack != 0) | 1696 | if (packet->ack != 0) |
1698 | goto out; | 1697 | goto out; |
1699 | 1698 | ||
1699 | if (packet->payload_bus) | ||
1700 | dma_unmap_single(ohci->card.device, packet->payload_bus, | ||
1701 | packet->payload_length, DMA_TO_DEVICE); | ||
1702 | |||
1700 | log_ar_at_event('T', packet->speed, packet->header, 0x20); | 1703 | log_ar_at_event('T', packet->speed, packet->header, 0x20); |
1701 | driver_data->packet = NULL; | 1704 | driver_data->packet = NULL; |
1702 | packet->ack = RCODE_CANCELLED; | 1705 | packet->ack = RCODE_CANCELLED; |
diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c index 022ac4fabb67..2884f876397b 100644 --- a/drivers/firewire/fw-transaction.c +++ b/drivers/firewire/fw-transaction.c | |||
@@ -207,6 +207,7 @@ fw_fill_request(struct fw_packet *packet, int tcode, int tlabel, | |||
207 | packet->speed = speed; | 207 | packet->speed = speed; |
208 | packet->generation = generation; | 208 | packet->generation = generation; |
209 | packet->ack = 0; | 209 | packet->ack = 0; |
210 | packet->payload_bus = 0; | ||
210 | } | 211 | } |
211 | 212 | ||
212 | /** | 213 | /** |
@@ -581,6 +582,8 @@ fw_fill_response(struct fw_packet *response, u32 *request_header, | |||
581 | BUG(); | 582 | BUG(); |
582 | return; | 583 | return; |
583 | } | 584 | } |
585 | |||
586 | response->payload_bus = 0; | ||
584 | } | 587 | } |
585 | EXPORT_SYMBOL(fw_fill_response); | 588 | EXPORT_SYMBOL(fw_fill_response); |
586 | 589 | ||
diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index aed7dbb17cda..839466f0a795 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h | |||
@@ -27,6 +27,7 @@ | |||
27 | #include <linux/list.h> | 27 | #include <linux/list.h> |
28 | #include <linux/spinlock_types.h> | 28 | #include <linux/spinlock_types.h> |
29 | #include <linux/timer.h> | 29 | #include <linux/timer.h> |
30 | #include <linux/types.h> | ||
30 | #include <linux/workqueue.h> | 31 | #include <linux/workqueue.h> |
31 | 32 | ||
32 | #define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4) | 33 | #define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4) |
@@ -153,6 +154,7 @@ struct fw_packet { | |||
153 | size_t header_length; | 154 | size_t header_length; |
154 | void *payload; | 155 | void *payload; |
155 | size_t payload_length; | 156 | size_t payload_length; |
157 | dma_addr_t payload_bus; | ||
156 | u32 timestamp; | 158 | u32 timestamp; |
157 | 159 | ||
158 | /* | 160 | /* |
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index ba89b42f790a..553dd4bc3075 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c | |||
@@ -847,9 +847,10 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) | |||
847 | * and the registers being closely associated. | 847 | * and the registers being closely associated. |
848 | * | 848 | * |
849 | * According to chipset errata, on the 965GM, MSI interrupts may | 849 | * According to chipset errata, on the 965GM, MSI interrupts may |
850 | * be lost or delayed | 850 | * be lost or delayed, but we use them anyways to avoid |
851 | * stuck interrupts on some machines. | ||
851 | */ | 852 | */ |
852 | if (!IS_I945G(dev) && !IS_I945GM(dev) && !IS_I965GM(dev)) | 853 | if (!IS_I945G(dev) && !IS_I945GM(dev)) |
853 | pci_enable_msi(dev->pdev); | 854 | pci_enable_msi(dev->pdev); |
854 | 855 | ||
855 | intel_opregion_init(dev); | 856 | intel_opregion_init(dev); |
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 0a4f39b9a0ec..adc972cc6bfc 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h | |||
@@ -244,6 +244,10 @@ typedef struct drm_i915_private { | |||
244 | * List of objects currently involved in rendering from the | 244 | * List of objects currently involved in rendering from the |
245 | * ringbuffer. | 245 | * ringbuffer. |
246 | * | 246 | * |
247 | * Includes buffers having the contents of their GPU caches | ||
248 | * flushed, not necessarily primitives. last_rendering_seqno | ||
249 | * represents when the rendering involved will be completed. | ||
250 | * | ||
247 | * A reference is held on the buffer while on this list. | 251 | * A reference is held on the buffer while on this list. |
248 | */ | 252 | */ |
249 | struct list_head active_list; | 253 | struct list_head active_list; |
@@ -253,6 +257,8 @@ typedef struct drm_i915_private { | |||
253 | * still have a write_domain which needs to be flushed before | 257 | * still have a write_domain which needs to be flushed before |
254 | * unbinding. | 258 | * unbinding. |
255 | * | 259 | * |
260 | * last_rendering_seqno is 0 while an object is in this list. | ||
261 | * | ||
256 | * A reference is held on the buffer while on this list. | 262 | * A reference is held on the buffer while on this list. |
257 | */ | 263 | */ |
258 | struct list_head flushing_list; | 264 | struct list_head flushing_list; |
@@ -261,6 +267,8 @@ typedef struct drm_i915_private { | |||
261 | * LRU list of objects which are not in the ringbuffer and | 267 | * LRU list of objects which are not in the ringbuffer and |
262 | * are ready to unbind, but are still in the GTT. | 268 | * are ready to unbind, but are still in the GTT. |
263 | * | 269 | * |
270 | * last_rendering_seqno is 0 while an object is in this list. | ||
271 | * | ||
264 | * A reference is not held on the buffer while on this list, | 272 | * A reference is not held on the buffer while on this list, |
265 | * as merely being GTT-bound shouldn't prevent its being | 273 | * as merely being GTT-bound shouldn't prevent its being |
266 | * freed, and we'll pull it off the list in the free path. | 274 | * freed, and we'll pull it off the list in the free path. |
@@ -371,8 +379,8 @@ struct drm_i915_gem_object { | |||
371 | uint32_t agp_type; | 379 | uint32_t agp_type; |
372 | 380 | ||
373 | /** | 381 | /** |
374 | * Flagging of which individual pages are valid in GEM_DOMAIN_CPU when | 382 | * If present, while GEM_DOMAIN_CPU is in the read domain this array |
375 | * GEM_DOMAIN_CPU is not in the object's read domain. | 383 | * flags which individual pages are valid. |
376 | */ | 384 | */ |
377 | uint8_t *page_cpu_valid; | 385 | uint8_t *page_cpu_valid; |
378 | }; | 386 | }; |
@@ -394,9 +402,6 @@ struct drm_i915_gem_request { | |||
394 | /** Time at which this request was emitted, in jiffies. */ | 402 | /** Time at which this request was emitted, in jiffies. */ |
395 | unsigned long emitted_jiffies; | 403 | unsigned long emitted_jiffies; |
396 | 404 | ||
397 | /** Cache domains that were flushed at the start of the request. */ | ||
398 | uint32_t flush_domains; | ||
399 | |||
400 | struct list_head list; | 405 | struct list_head list; |
401 | }; | 406 | }; |
402 | 407 | ||
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index d58ddef468f8..ad672d854828 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c | |||
@@ -33,21 +33,21 @@ | |||
33 | 33 | ||
34 | #define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) | 34 | #define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) |
35 | 35 | ||
36 | static int | 36 | static void |
37 | i915_gem_object_set_domain(struct drm_gem_object *obj, | 37 | i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, |
38 | uint32_t read_domains, | 38 | uint32_t read_domains, |
39 | uint32_t write_domain); | 39 | uint32_t write_domain); |
40 | static int | 40 | static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj); |
41 | i915_gem_object_set_domain_range(struct drm_gem_object *obj, | 41 | static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj); |
42 | uint64_t offset, | 42 | static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj); |
43 | uint64_t size, | 43 | static int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, |
44 | uint32_t read_domains, | 44 | int write); |
45 | uint32_t write_domain); | 45 | static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, |
46 | static int | 46 | int write); |
47 | i915_gem_set_domain(struct drm_gem_object *obj, | 47 | static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, |
48 | struct drm_file *file_priv, | 48 | uint64_t offset, |
49 | uint32_t read_domains, | 49 | uint64_t size); |
50 | uint32_t write_domain); | 50 | static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj); |
51 | static int i915_gem_object_get_page_list(struct drm_gem_object *obj); | 51 | static int i915_gem_object_get_page_list(struct drm_gem_object *obj); |
52 | static void i915_gem_object_free_page_list(struct drm_gem_object *obj); | 52 | static void i915_gem_object_free_page_list(struct drm_gem_object *obj); |
53 | static int i915_gem_object_wait_rendering(struct drm_gem_object *obj); | 53 | static int i915_gem_object_wait_rendering(struct drm_gem_object *obj); |
@@ -162,8 +162,8 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, | |||
162 | 162 | ||
163 | mutex_lock(&dev->struct_mutex); | 163 | mutex_lock(&dev->struct_mutex); |
164 | 164 | ||
165 | ret = i915_gem_object_set_domain_range(obj, args->offset, args->size, | 165 | ret = i915_gem_object_set_cpu_read_domain_range(obj, args->offset, |
166 | I915_GEM_DOMAIN_CPU, 0); | 166 | args->size); |
167 | if (ret != 0) { | 167 | if (ret != 0) { |
168 | drm_gem_object_unreference(obj); | 168 | drm_gem_object_unreference(obj); |
169 | mutex_unlock(&dev->struct_mutex); | 169 | mutex_unlock(&dev->struct_mutex); |
@@ -260,8 +260,7 @@ i915_gem_gtt_pwrite(struct drm_device *dev, struct drm_gem_object *obj, | |||
260 | mutex_unlock(&dev->struct_mutex); | 260 | mutex_unlock(&dev->struct_mutex); |
261 | return ret; | 261 | return ret; |
262 | } | 262 | } |
263 | ret = i915_gem_set_domain(obj, file_priv, | 263 | ret = i915_gem_object_set_to_gtt_domain(obj, 1); |
264 | I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT); | ||
265 | if (ret) | 264 | if (ret) |
266 | goto fail; | 265 | goto fail; |
267 | 266 | ||
@@ -320,8 +319,7 @@ i915_gem_shmem_pwrite(struct drm_device *dev, struct drm_gem_object *obj, | |||
320 | 319 | ||
321 | mutex_lock(&dev->struct_mutex); | 320 | mutex_lock(&dev->struct_mutex); |
322 | 321 | ||
323 | ret = i915_gem_set_domain(obj, file_priv, | 322 | ret = i915_gem_object_set_to_cpu_domain(obj, 1); |
324 | I915_GEM_DOMAIN_CPU, I915_GEM_DOMAIN_CPU); | ||
325 | if (ret) { | 323 | if (ret) { |
326 | mutex_unlock(&dev->struct_mutex); | 324 | mutex_unlock(&dev->struct_mutex); |
327 | return ret; | 325 | return ret; |
@@ -397,7 +395,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, | |||
397 | } | 395 | } |
398 | 396 | ||
399 | /** | 397 | /** |
400 | * Called when user space prepares to use an object | 398 | * Called when user space prepares to use an object with the CPU, either |
399 | * through the mmap ioctl's mapping or a GTT mapping. | ||
401 | */ | 400 | */ |
402 | int | 401 | int |
403 | i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, | 402 | i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, |
@@ -405,11 +404,26 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, | |||
405 | { | 404 | { |
406 | struct drm_i915_gem_set_domain *args = data; | 405 | struct drm_i915_gem_set_domain *args = data; |
407 | struct drm_gem_object *obj; | 406 | struct drm_gem_object *obj; |
407 | uint32_t read_domains = args->read_domains; | ||
408 | uint32_t write_domain = args->write_domain; | ||
408 | int ret; | 409 | int ret; |
409 | 410 | ||
410 | if (!(dev->driver->driver_features & DRIVER_GEM)) | 411 | if (!(dev->driver->driver_features & DRIVER_GEM)) |
411 | return -ENODEV; | 412 | return -ENODEV; |
412 | 413 | ||
414 | /* Only handle setting domains to types used by the CPU. */ | ||
415 | if (write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) | ||
416 | return -EINVAL; | ||
417 | |||
418 | if (read_domains & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) | ||
419 | return -EINVAL; | ||
420 | |||
421 | /* Having something in the write domain implies it's in the read | ||
422 | * domain, and only that read domain. Enforce that in the request. | ||
423 | */ | ||
424 | if (write_domain != 0 && read_domains != write_domain) | ||
425 | return -EINVAL; | ||
426 | |||
413 | obj = drm_gem_object_lookup(dev, file_priv, args->handle); | 427 | obj = drm_gem_object_lookup(dev, file_priv, args->handle); |
414 | if (obj == NULL) | 428 | if (obj == NULL) |
415 | return -EBADF; | 429 | return -EBADF; |
@@ -417,10 +431,21 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, | |||
417 | mutex_lock(&dev->struct_mutex); | 431 | mutex_lock(&dev->struct_mutex); |
418 | #if WATCH_BUF | 432 | #if WATCH_BUF |
419 | DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n", | 433 | DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n", |
420 | obj, obj->size, args->read_domains, args->write_domain); | 434 | obj, obj->size, read_domains, write_domain); |
421 | #endif | 435 | #endif |
422 | ret = i915_gem_set_domain(obj, file_priv, | 436 | if (read_domains & I915_GEM_DOMAIN_GTT) { |
423 | args->read_domains, args->write_domain); | 437 | ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0); |
438 | |||
439 | /* Silently promote "you're not bound, there was nothing to do" | ||
440 | * to success, since the client was just asking us to | ||
441 | * make sure everything was done. | ||
442 | */ | ||
443 | if (ret == -EINVAL) | ||
444 | ret = 0; | ||
445 | } else { | ||
446 | ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0); | ||
447 | } | ||
448 | |||
424 | drm_gem_object_unreference(obj); | 449 | drm_gem_object_unreference(obj); |
425 | mutex_unlock(&dev->struct_mutex); | 450 | mutex_unlock(&dev->struct_mutex); |
426 | return ret; | 451 | return ret; |
@@ -455,10 +480,9 @@ i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, | |||
455 | obj_priv = obj->driver_private; | 480 | obj_priv = obj->driver_private; |
456 | 481 | ||
457 | /* Pinned buffers may be scanout, so flush the cache */ | 482 | /* Pinned buffers may be scanout, so flush the cache */ |
458 | if ((obj->write_domain & I915_GEM_DOMAIN_CPU) && obj_priv->pin_count) { | 483 | if (obj_priv->pin_count) |
459 | i915_gem_clflush_object(obj); | 484 | i915_gem_object_flush_cpu_write_domain(obj); |
460 | drm_agp_chipset_flush(dev); | 485 | |
461 | } | ||
462 | drm_gem_object_unreference(obj); | 486 | drm_gem_object_unreference(obj); |
463 | mutex_unlock(&dev->struct_mutex); | 487 | mutex_unlock(&dev->struct_mutex); |
464 | return ret; | 488 | return ret; |
@@ -532,7 +556,7 @@ i915_gem_object_free_page_list(struct drm_gem_object *obj) | |||
532 | } | 556 | } |
533 | 557 | ||
534 | static void | 558 | static void |
535 | i915_gem_object_move_to_active(struct drm_gem_object *obj) | 559 | i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno) |
536 | { | 560 | { |
537 | struct drm_device *dev = obj->dev; | 561 | struct drm_device *dev = obj->dev; |
538 | drm_i915_private_t *dev_priv = dev->dev_private; | 562 | drm_i915_private_t *dev_priv = dev->dev_private; |
@@ -546,8 +570,20 @@ i915_gem_object_move_to_active(struct drm_gem_object *obj) | |||
546 | /* Move from whatever list we were on to the tail of execution. */ | 570 | /* Move from whatever list we were on to the tail of execution. */ |
547 | list_move_tail(&obj_priv->list, | 571 | list_move_tail(&obj_priv->list, |
548 | &dev_priv->mm.active_list); | 572 | &dev_priv->mm.active_list); |
573 | obj_priv->last_rendering_seqno = seqno; | ||
549 | } | 574 | } |
550 | 575 | ||
576 | static void | ||
577 | i915_gem_object_move_to_flushing(struct drm_gem_object *obj) | ||
578 | { | ||
579 | struct drm_device *dev = obj->dev; | ||
580 | drm_i915_private_t *dev_priv = dev->dev_private; | ||
581 | struct drm_i915_gem_object *obj_priv = obj->driver_private; | ||
582 | |||
583 | BUG_ON(!obj_priv->active); | ||
584 | list_move_tail(&obj_priv->list, &dev_priv->mm.flushing_list); | ||
585 | obj_priv->last_rendering_seqno = 0; | ||
586 | } | ||
551 | 587 | ||
552 | static void | 588 | static void |
553 | i915_gem_object_move_to_inactive(struct drm_gem_object *obj) | 589 | i915_gem_object_move_to_inactive(struct drm_gem_object *obj) |
@@ -562,6 +598,7 @@ i915_gem_object_move_to_inactive(struct drm_gem_object *obj) | |||
562 | else | 598 | else |
563 | list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list); | 599 | list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list); |
564 | 600 | ||
601 | obj_priv->last_rendering_seqno = 0; | ||
565 | if (obj_priv->active) { | 602 | if (obj_priv->active) { |
566 | obj_priv->active = 0; | 603 | obj_priv->active = 0; |
567 | drm_gem_object_unreference(obj); | 604 | drm_gem_object_unreference(obj); |
@@ -610,10 +647,28 @@ i915_add_request(struct drm_device *dev, uint32_t flush_domains) | |||
610 | 647 | ||
611 | request->seqno = seqno; | 648 | request->seqno = seqno; |
612 | request->emitted_jiffies = jiffies; | 649 | request->emitted_jiffies = jiffies; |
613 | request->flush_domains = flush_domains; | ||
614 | was_empty = list_empty(&dev_priv->mm.request_list); | 650 | was_empty = list_empty(&dev_priv->mm.request_list); |
615 | list_add_tail(&request->list, &dev_priv->mm.request_list); | 651 | list_add_tail(&request->list, &dev_priv->mm.request_list); |
616 | 652 | ||
653 | /* Associate any objects on the flushing list matching the write | ||
654 | * domain we're flushing with our flush. | ||
655 | */ | ||
656 | if (flush_domains != 0) { | ||
657 | struct drm_i915_gem_object *obj_priv, *next; | ||
658 | |||
659 | list_for_each_entry_safe(obj_priv, next, | ||
660 | &dev_priv->mm.flushing_list, list) { | ||
661 | struct drm_gem_object *obj = obj_priv->obj; | ||
662 | |||
663 | if ((obj->write_domain & flush_domains) == | ||
664 | obj->write_domain) { | ||
665 | obj->write_domain = 0; | ||
666 | i915_gem_object_move_to_active(obj, seqno); | ||
667 | } | ||
668 | } | ||
669 | |||
670 | } | ||
671 | |||
617 | if (was_empty && !dev_priv->mm.suspended) | 672 | if (was_empty && !dev_priv->mm.suspended) |
618 | schedule_delayed_work(&dev_priv->mm.retire_work, HZ); | 673 | schedule_delayed_work(&dev_priv->mm.retire_work, HZ); |
619 | return seqno; | 674 | return seqno; |
@@ -676,30 +731,10 @@ i915_gem_retire_request(struct drm_device *dev, | |||
676 | __func__, request->seqno, obj); | 731 | __func__, request->seqno, obj); |
677 | #endif | 732 | #endif |
678 | 733 | ||
679 | if (obj->write_domain != 0) { | 734 | if (obj->write_domain != 0) |
680 | list_move_tail(&obj_priv->list, | 735 | i915_gem_object_move_to_flushing(obj); |
681 | &dev_priv->mm.flushing_list); | 736 | else |
682 | } else { | ||
683 | i915_gem_object_move_to_inactive(obj); | 737 | i915_gem_object_move_to_inactive(obj); |
684 | } | ||
685 | } | ||
686 | |||
687 | if (request->flush_domains != 0) { | ||
688 | struct drm_i915_gem_object *obj_priv, *next; | ||
689 | |||
690 | /* Clear the write domain and activity from any buffers | ||
691 | * that are just waiting for a flush matching the one retired. | ||
692 | */ | ||
693 | list_for_each_entry_safe(obj_priv, next, | ||
694 | &dev_priv->mm.flushing_list, list) { | ||
695 | struct drm_gem_object *obj = obj_priv->obj; | ||
696 | |||
697 | if (obj->write_domain & request->flush_domains) { | ||
698 | obj->write_domain = 0; | ||
699 | i915_gem_object_move_to_inactive(obj); | ||
700 | } | ||
701 | } | ||
702 | |||
703 | } | 738 | } |
704 | } | 739 | } |
705 | 740 | ||
@@ -892,25 +927,10 @@ i915_gem_object_wait_rendering(struct drm_gem_object *obj) | |||
892 | struct drm_i915_gem_object *obj_priv = obj->driver_private; | 927 | struct drm_i915_gem_object *obj_priv = obj->driver_private; |
893 | int ret; | 928 | int ret; |
894 | 929 | ||
895 | /* If there are writes queued to the buffer, flush and | 930 | /* This function only exists to support waiting for existing rendering, |
896 | * create a new seqno to wait for. | 931 | * not for emitting required flushes. |
897 | */ | 932 | */ |
898 | if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) { | 933 | BUG_ON((obj->write_domain & I915_GEM_GPU_DOMAINS) != 0); |
899 | uint32_t write_domain = obj->write_domain; | ||
900 | #if WATCH_BUF | ||
901 | DRM_INFO("%s: flushing object %p from write domain %08x\n", | ||
902 | __func__, obj, write_domain); | ||
903 | #endif | ||
904 | i915_gem_flush(dev, 0, write_domain); | ||
905 | |||
906 | i915_gem_object_move_to_active(obj); | ||
907 | obj_priv->last_rendering_seqno = i915_add_request(dev, | ||
908 | write_domain); | ||
909 | BUG_ON(obj_priv->last_rendering_seqno == 0); | ||
910 | #if WATCH_LRU | ||
911 | DRM_INFO("%s: flush moves to exec list %p\n", __func__, obj); | ||
912 | #endif | ||
913 | } | ||
914 | 934 | ||
915 | /* If there is rendering queued on the buffer being evicted, wait for | 935 | /* If there is rendering queued on the buffer being evicted, wait for |
916 | * it. | 936 | * it. |
@@ -950,24 +970,16 @@ i915_gem_object_unbind(struct drm_gem_object *obj) | |||
950 | return -EINVAL; | 970 | return -EINVAL; |
951 | } | 971 | } |
952 | 972 | ||
953 | /* Wait for any rendering to complete | ||
954 | */ | ||
955 | ret = i915_gem_object_wait_rendering(obj); | ||
956 | if (ret) { | ||
957 | DRM_ERROR("wait_rendering failed: %d\n", ret); | ||
958 | return ret; | ||
959 | } | ||
960 | |||
961 | /* Move the object to the CPU domain to ensure that | 973 | /* Move the object to the CPU domain to ensure that |
962 | * any possible CPU writes while it's not in the GTT | 974 | * any possible CPU writes while it's not in the GTT |
963 | * are flushed when we go to remap it. This will | 975 | * are flushed when we go to remap it. This will |
964 | * also ensure that all pending GPU writes are finished | 976 | * also ensure that all pending GPU writes are finished |
965 | * before we unbind. | 977 | * before we unbind. |
966 | */ | 978 | */ |
967 | ret = i915_gem_object_set_domain(obj, I915_GEM_DOMAIN_CPU, | 979 | ret = i915_gem_object_set_to_cpu_domain(obj, 1); |
968 | I915_GEM_DOMAIN_CPU); | ||
969 | if (ret) { | 980 | if (ret) { |
970 | DRM_ERROR("set_domain failed: %d\n", ret); | 981 | if (ret != -ERESTARTSYS) |
982 | DRM_ERROR("set_domain failed: %d\n", ret); | ||
971 | return ret; | 983 | return ret; |
972 | } | 984 | } |
973 | 985 | ||
@@ -1083,6 +1095,21 @@ i915_gem_evict_something(struct drm_device *dev) | |||
1083 | } | 1095 | } |
1084 | 1096 | ||
1085 | static int | 1097 | static int |
1098 | i915_gem_evict_everything(struct drm_device *dev) | ||
1099 | { | ||
1100 | int ret; | ||
1101 | |||
1102 | for (;;) { | ||
1103 | ret = i915_gem_evict_something(dev); | ||
1104 | if (ret != 0) | ||
1105 | break; | ||
1106 | } | ||
1107 | if (ret == -ENOMEM) | ||
1108 | return 0; | ||
1109 | return ret; | ||
1110 | } | ||
1111 | |||
1112 | static int | ||
1086 | i915_gem_object_get_page_list(struct drm_gem_object *obj) | 1113 | i915_gem_object_get_page_list(struct drm_gem_object *obj) |
1087 | { | 1114 | { |
1088 | struct drm_i915_gem_object *obj_priv = obj->driver_private; | 1115 | struct drm_i915_gem_object *obj_priv = obj->driver_private; |
@@ -1168,7 +1195,8 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) | |||
1168 | 1195 | ||
1169 | ret = i915_gem_evict_something(dev); | 1196 | ret = i915_gem_evict_something(dev); |
1170 | if (ret != 0) { | 1197 | if (ret != 0) { |
1171 | DRM_ERROR("Failed to evict a buffer %d\n", ret); | 1198 | if (ret != -ERESTARTSYS) |
1199 | DRM_ERROR("Failed to evict a buffer %d\n", ret); | ||
1172 | return ret; | 1200 | return ret; |
1173 | } | 1201 | } |
1174 | goto search_free; | 1202 | goto search_free; |
@@ -1228,6 +1256,143 @@ i915_gem_clflush_object(struct drm_gem_object *obj) | |||
1228 | drm_clflush_pages(obj_priv->page_list, obj->size / PAGE_SIZE); | 1256 | drm_clflush_pages(obj_priv->page_list, obj->size / PAGE_SIZE); |
1229 | } | 1257 | } |
1230 | 1258 | ||
1259 | /** Flushes any GPU write domain for the object if it's dirty. */ | ||
1260 | static void | ||
1261 | i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj) | ||
1262 | { | ||
1263 | struct drm_device *dev = obj->dev; | ||
1264 | uint32_t seqno; | ||
1265 | |||
1266 | if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0) | ||
1267 | return; | ||
1268 | |||
1269 | /* Queue the GPU write cache flushing we need. */ | ||
1270 | i915_gem_flush(dev, 0, obj->write_domain); | ||
1271 | seqno = i915_add_request(dev, obj->write_domain); | ||
1272 | obj->write_domain = 0; | ||
1273 | i915_gem_object_move_to_active(obj, seqno); | ||
1274 | } | ||
1275 | |||
1276 | /** Flushes the GTT write domain for the object if it's dirty. */ | ||
1277 | static void | ||
1278 | i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj) | ||
1279 | { | ||
1280 | if (obj->write_domain != I915_GEM_DOMAIN_GTT) | ||
1281 | return; | ||
1282 | |||
1283 | /* No actual flushing is required for the GTT write domain. Writes | ||
1284 | * to it immediately go to main memory as far as we know, so there's | ||
1285 | * no chipset flush. It also doesn't land in render cache. | ||
1286 | */ | ||
1287 | obj->write_domain = 0; | ||
1288 | } | ||
1289 | |||
1290 | /** Flushes the CPU write domain for the object if it's dirty. */ | ||
1291 | static void | ||
1292 | i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj) | ||
1293 | { | ||
1294 | struct drm_device *dev = obj->dev; | ||
1295 | |||
1296 | if (obj->write_domain != I915_GEM_DOMAIN_CPU) | ||
1297 | return; | ||
1298 | |||
1299 | i915_gem_clflush_object(obj); | ||
1300 | drm_agp_chipset_flush(dev); | ||
1301 | obj->write_domain = 0; | ||
1302 | } | ||
1303 | |||
1304 | /** | ||
1305 | * Moves a single object to the GTT read, and possibly write domain. | ||
1306 | * | ||
1307 | * This function returns when the move is complete, including waiting on | ||
1308 | * flushes to occur. | ||
1309 | */ | ||
1310 | static int | ||
1311 | i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write) | ||
1312 | { | ||
1313 | struct drm_i915_gem_object *obj_priv = obj->driver_private; | ||
1314 | int ret; | ||
1315 | |||
1316 | /* Not valid to be called on unbound objects. */ | ||
1317 | if (obj_priv->gtt_space == NULL) | ||
1318 | return -EINVAL; | ||
1319 | |||
1320 | i915_gem_object_flush_gpu_write_domain(obj); | ||
1321 | /* Wait on any GPU rendering and flushing to occur. */ | ||
1322 | ret = i915_gem_object_wait_rendering(obj); | ||
1323 | if (ret != 0) | ||
1324 | return ret; | ||
1325 | |||
1326 | /* If we're writing through the GTT domain, then CPU and GPU caches | ||
1327 | * will need to be invalidated at next use. | ||
1328 | */ | ||
1329 | if (write) | ||
1330 | obj->read_domains &= I915_GEM_DOMAIN_GTT; | ||
1331 | |||
1332 | i915_gem_object_flush_cpu_write_domain(obj); | ||
1333 | |||
1334 | /* It should now be out of any other write domains, and we can update | ||
1335 | * the domain values for our changes. | ||
1336 | */ | ||
1337 | BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0); | ||
1338 | obj->read_domains |= I915_GEM_DOMAIN_GTT; | ||
1339 | if (write) { | ||
1340 | obj->write_domain = I915_GEM_DOMAIN_GTT; | ||
1341 | obj_priv->dirty = 1; | ||
1342 | } | ||
1343 | |||
1344 | return 0; | ||
1345 | } | ||
1346 | |||
1347 | /** | ||
1348 | * Moves a single object to the CPU read, and possibly write domain. | ||
1349 | * | ||
1350 | * This function returns when the move is complete, including waiting on | ||
1351 | * flushes to occur. | ||
1352 | */ | ||
1353 | static int | ||
1354 | i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write) | ||
1355 | { | ||
1356 | struct drm_device *dev = obj->dev; | ||
1357 | int ret; | ||
1358 | |||
1359 | i915_gem_object_flush_gpu_write_domain(obj); | ||
1360 | /* Wait on any GPU rendering and flushing to occur. */ | ||
1361 | ret = i915_gem_object_wait_rendering(obj); | ||
1362 | if (ret != 0) | ||
1363 | return ret; | ||
1364 | |||
1365 | i915_gem_object_flush_gtt_write_domain(obj); | ||
1366 | |||
1367 | /* If we have a partially-valid cache of the object in the CPU, | ||
1368 | * finish invalidating it and free the per-page flags. | ||
1369 | */ | ||
1370 | i915_gem_object_set_to_full_cpu_read_domain(obj); | ||
1371 | |||
1372 | /* Flush the CPU cache if it's still invalid. */ | ||
1373 | if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) { | ||
1374 | i915_gem_clflush_object(obj); | ||
1375 | drm_agp_chipset_flush(dev); | ||
1376 | |||
1377 | obj->read_domains |= I915_GEM_DOMAIN_CPU; | ||
1378 | } | ||
1379 | |||
1380 | /* It should now be out of any other write domains, and we can update | ||
1381 | * the domain values for our changes. | ||
1382 | */ | ||
1383 | BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0); | ||
1384 | |||
1385 | /* If we're writing through the CPU, then the GPU read domains will | ||
1386 | * need to be invalidated at next use. | ||
1387 | */ | ||
1388 | if (write) { | ||
1389 | obj->read_domains &= I915_GEM_DOMAIN_CPU; | ||
1390 | obj->write_domain = I915_GEM_DOMAIN_CPU; | ||
1391 | } | ||
1392 | |||
1393 | return 0; | ||
1394 | } | ||
1395 | |||
1231 | /* | 1396 | /* |
1232 | * Set the next domain for the specified object. This | 1397 | * Set the next domain for the specified object. This |
1233 | * may not actually perform the necessary flushing/invaliding though, | 1398 | * may not actually perform the necessary flushing/invaliding though, |
@@ -1339,16 +1504,18 @@ i915_gem_clflush_object(struct drm_gem_object *obj) | |||
1339 | * MI_FLUSH | 1504 | * MI_FLUSH |
1340 | * drm_agp_chipset_flush | 1505 | * drm_agp_chipset_flush |
1341 | */ | 1506 | */ |
1342 | static int | 1507 | static void |
1343 | i915_gem_object_set_domain(struct drm_gem_object *obj, | 1508 | i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, |
1344 | uint32_t read_domains, | 1509 | uint32_t read_domains, |
1345 | uint32_t write_domain) | 1510 | uint32_t write_domain) |
1346 | { | 1511 | { |
1347 | struct drm_device *dev = obj->dev; | 1512 | struct drm_device *dev = obj->dev; |
1348 | struct drm_i915_gem_object *obj_priv = obj->driver_private; | 1513 | struct drm_i915_gem_object *obj_priv = obj->driver_private; |
1349 | uint32_t invalidate_domains = 0; | 1514 | uint32_t invalidate_domains = 0; |
1350 | uint32_t flush_domains = 0; | 1515 | uint32_t flush_domains = 0; |
1351 | int ret; | 1516 | |
1517 | BUG_ON(read_domains & I915_GEM_DOMAIN_CPU); | ||
1518 | BUG_ON(write_domain == I915_GEM_DOMAIN_CPU); | ||
1352 | 1519 | ||
1353 | #if WATCH_BUF | 1520 | #if WATCH_BUF |
1354 | DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n", | 1521 | DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n", |
@@ -1385,34 +1552,11 @@ i915_gem_object_set_domain(struct drm_gem_object *obj, | |||
1385 | DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n", | 1552 | DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n", |
1386 | __func__, flush_domains, invalidate_domains); | 1553 | __func__, flush_domains, invalidate_domains); |
1387 | #endif | 1554 | #endif |
1388 | /* | ||
1389 | * If we're invaliding the CPU cache and flushing a GPU cache, | ||
1390 | * then pause for rendering so that the GPU caches will be | ||
1391 | * flushed before the cpu cache is invalidated | ||
1392 | */ | ||
1393 | if ((invalidate_domains & I915_GEM_DOMAIN_CPU) && | ||
1394 | (flush_domains & ~(I915_GEM_DOMAIN_CPU | | ||
1395 | I915_GEM_DOMAIN_GTT))) { | ||
1396 | ret = i915_gem_object_wait_rendering(obj); | ||
1397 | if (ret) | ||
1398 | return ret; | ||
1399 | } | ||
1400 | i915_gem_clflush_object(obj); | 1555 | i915_gem_clflush_object(obj); |
1401 | } | 1556 | } |
1402 | 1557 | ||
1403 | if ((write_domain | flush_domains) != 0) | 1558 | if ((write_domain | flush_domains) != 0) |
1404 | obj->write_domain = write_domain; | 1559 | obj->write_domain = write_domain; |
1405 | |||
1406 | /* If we're invalidating the CPU domain, clear the per-page CPU | ||
1407 | * domain list as well. | ||
1408 | */ | ||
1409 | if (obj_priv->page_cpu_valid != NULL && | ||
1410 | (write_domain != 0 || | ||
1411 | read_domains & I915_GEM_DOMAIN_CPU)) { | ||
1412 | drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE, | ||
1413 | DRM_MEM_DRIVER); | ||
1414 | obj_priv->page_cpu_valid = NULL; | ||
1415 | } | ||
1416 | obj->read_domains = read_domains; | 1560 | obj->read_domains = read_domains; |
1417 | 1561 | ||
1418 | dev->invalidate_domains |= invalidate_domains; | 1562 | dev->invalidate_domains |= invalidate_domains; |
@@ -1423,47 +1567,94 @@ i915_gem_object_set_domain(struct drm_gem_object *obj, | |||
1423 | obj->read_domains, obj->write_domain, | 1567 | obj->read_domains, obj->write_domain, |
1424 | dev->invalidate_domains, dev->flush_domains); | 1568 | dev->invalidate_domains, dev->flush_domains); |
1425 | #endif | 1569 | #endif |
1426 | return 0; | ||
1427 | } | 1570 | } |
1428 | 1571 | ||
1429 | /** | 1572 | /** |
1430 | * Set the read/write domain on a range of the object. | 1573 | * Moves the object from a partially CPU read to a full one. |
1431 | * | 1574 | * |
1432 | * Currently only implemented for CPU reads, otherwise drops to normal | 1575 | * Note that this only resolves i915_gem_object_set_cpu_read_domain_range(), |
1433 | * i915_gem_object_set_domain(). | 1576 | * and doesn't handle transitioning from !(read_domains & I915_GEM_DOMAIN_CPU). |
1434 | */ | 1577 | */ |
1435 | static int | 1578 | static void |
1436 | i915_gem_object_set_domain_range(struct drm_gem_object *obj, | 1579 | i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj) |
1437 | uint64_t offset, | ||
1438 | uint64_t size, | ||
1439 | uint32_t read_domains, | ||
1440 | uint32_t write_domain) | ||
1441 | { | 1580 | { |
1581 | struct drm_device *dev = obj->dev; | ||
1442 | struct drm_i915_gem_object *obj_priv = obj->driver_private; | 1582 | struct drm_i915_gem_object *obj_priv = obj->driver_private; |
1443 | int ret, i; | ||
1444 | 1583 | ||
1445 | if (obj->read_domains & I915_GEM_DOMAIN_CPU) | 1584 | if (!obj_priv->page_cpu_valid) |
1446 | return 0; | 1585 | return; |
1447 | 1586 | ||
1448 | if (read_domains != I915_GEM_DOMAIN_CPU || | 1587 | /* If we're partially in the CPU read domain, finish moving it in. |
1449 | write_domain != 0) | 1588 | */ |
1450 | return i915_gem_object_set_domain(obj, | 1589 | if (obj->read_domains & I915_GEM_DOMAIN_CPU) { |
1451 | read_domains, write_domain); | 1590 | int i; |
1452 | 1591 | ||
1453 | /* Wait on any GPU rendering to the object to be flushed. */ | 1592 | for (i = 0; i <= (obj->size - 1) / PAGE_SIZE; i++) { |
1593 | if (obj_priv->page_cpu_valid[i]) | ||
1594 | continue; | ||
1595 | drm_clflush_pages(obj_priv->page_list + i, 1); | ||
1596 | } | ||
1597 | drm_agp_chipset_flush(dev); | ||
1598 | } | ||
1599 | |||
1600 | /* Free the page_cpu_valid mappings which are now stale, whether | ||
1601 | * or not we've got I915_GEM_DOMAIN_CPU. | ||
1602 | */ | ||
1603 | drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE, | ||
1604 | DRM_MEM_DRIVER); | ||
1605 | obj_priv->page_cpu_valid = NULL; | ||
1606 | } | ||
1607 | |||
1608 | /** | ||
1609 | * Set the CPU read domain on a range of the object. | ||
1610 | * | ||
1611 | * The object ends up with I915_GEM_DOMAIN_CPU in its read flags although it's | ||
1612 | * not entirely valid. The page_cpu_valid member of the object flags which | ||
1613 | * pages have been flushed, and will be respected by | ||
1614 | * i915_gem_object_set_to_cpu_domain() if it's called on to get a valid mapping | ||
1615 | * of the whole object. | ||
1616 | * | ||
1617 | * This function returns when the move is complete, including waiting on | ||
1618 | * flushes to occur. | ||
1619 | */ | ||
1620 | static int | ||
1621 | i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, | ||
1622 | uint64_t offset, uint64_t size) | ||
1623 | { | ||
1624 | struct drm_i915_gem_object *obj_priv = obj->driver_private; | ||
1625 | int i, ret; | ||
1626 | |||
1627 | if (offset == 0 && size == obj->size) | ||
1628 | return i915_gem_object_set_to_cpu_domain(obj, 0); | ||
1629 | |||
1630 | i915_gem_object_flush_gpu_write_domain(obj); | ||
1631 | /* Wait on any GPU rendering and flushing to occur. */ | ||
1454 | ret = i915_gem_object_wait_rendering(obj); | 1632 | ret = i915_gem_object_wait_rendering(obj); |
1455 | if (ret) | 1633 | if (ret != 0) |
1456 | return ret; | 1634 | return ret; |
1635 | i915_gem_object_flush_gtt_write_domain(obj); | ||
1457 | 1636 | ||
1637 | /* If we're already fully in the CPU read domain, we're done. */ | ||
1638 | if (obj_priv->page_cpu_valid == NULL && | ||
1639 | (obj->read_domains & I915_GEM_DOMAIN_CPU) != 0) | ||
1640 | return 0; | ||
1641 | |||
1642 | /* Otherwise, create/clear the per-page CPU read domain flag if we're | ||
1643 | * newly adding I915_GEM_DOMAIN_CPU | ||
1644 | */ | ||
1458 | if (obj_priv->page_cpu_valid == NULL) { | 1645 | if (obj_priv->page_cpu_valid == NULL) { |
1459 | obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE, | 1646 | obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE, |
1460 | DRM_MEM_DRIVER); | 1647 | DRM_MEM_DRIVER); |
1461 | } | 1648 | if (obj_priv->page_cpu_valid == NULL) |
1649 | return -ENOMEM; | ||
1650 | } else if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) | ||
1651 | memset(obj_priv->page_cpu_valid, 0, obj->size / PAGE_SIZE); | ||
1462 | 1652 | ||
1463 | /* Flush the cache on any pages that are still invalid from the CPU's | 1653 | /* Flush the cache on any pages that are still invalid from the CPU's |
1464 | * perspective. | 1654 | * perspective. |
1465 | */ | 1655 | */ |
1466 | for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; i++) { | 1656 | for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; |
1657 | i++) { | ||
1467 | if (obj_priv->page_cpu_valid[i]) | 1658 | if (obj_priv->page_cpu_valid[i]) |
1468 | continue; | 1659 | continue; |
1469 | 1660 | ||
@@ -1472,39 +1663,14 @@ i915_gem_object_set_domain_range(struct drm_gem_object *obj, | |||
1472 | obj_priv->page_cpu_valid[i] = 1; | 1663 | obj_priv->page_cpu_valid[i] = 1; |
1473 | } | 1664 | } |
1474 | 1665 | ||
1475 | return 0; | 1666 | /* It should now be out of any other write domains, and we can update |
1476 | } | 1667 | * the domain values for our changes. |
1477 | |||
1478 | /** | ||
1479 | * Once all of the objects have been set in the proper domain, | ||
1480 | * perform the necessary flush and invalidate operations. | ||
1481 | * | ||
1482 | * Returns the write domains flushed, for use in flush tracking. | ||
1483 | */ | ||
1484 | static uint32_t | ||
1485 | i915_gem_dev_set_domain(struct drm_device *dev) | ||
1486 | { | ||
1487 | uint32_t flush_domains = dev->flush_domains; | ||
1488 | |||
1489 | /* | ||
1490 | * Now that all the buffers are synced to the proper domains, | ||
1491 | * flush and invalidate the collected domains | ||
1492 | */ | 1668 | */ |
1493 | if (dev->invalidate_domains | dev->flush_domains) { | 1669 | BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0); |
1494 | #if WATCH_EXEC | ||
1495 | DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", | ||
1496 | __func__, | ||
1497 | dev->invalidate_domains, | ||
1498 | dev->flush_domains); | ||
1499 | #endif | ||
1500 | i915_gem_flush(dev, | ||
1501 | dev->invalidate_domains, | ||
1502 | dev->flush_domains); | ||
1503 | dev->invalidate_domains = 0; | ||
1504 | dev->flush_domains = 0; | ||
1505 | } | ||
1506 | 1670 | ||
1507 | return flush_domains; | 1671 | obj->read_domains |= I915_GEM_DOMAIN_CPU; |
1672 | |||
1673 | return 0; | ||
1508 | } | 1674 | } |
1509 | 1675 | ||
1510 | /** | 1676 | /** |
@@ -1585,6 +1751,18 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, | |||
1585 | return -EINVAL; | 1751 | return -EINVAL; |
1586 | } | 1752 | } |
1587 | 1753 | ||
1754 | if (reloc.write_domain & I915_GEM_DOMAIN_CPU || | ||
1755 | reloc.read_domains & I915_GEM_DOMAIN_CPU) { | ||
1756 | DRM_ERROR("reloc with read/write CPU domains: " | ||
1757 | "obj %p target %d offset %d " | ||
1758 | "read %08x write %08x", | ||
1759 | obj, reloc.target_handle, | ||
1760 | (int) reloc.offset, | ||
1761 | reloc.read_domains, | ||
1762 | reloc.write_domain); | ||
1763 | return -EINVAL; | ||
1764 | } | ||
1765 | |||
1588 | if (reloc.write_domain && target_obj->pending_write_domain && | 1766 | if (reloc.write_domain && target_obj->pending_write_domain && |
1589 | reloc.write_domain != target_obj->pending_write_domain) { | 1767 | reloc.write_domain != target_obj->pending_write_domain) { |
1590 | DRM_ERROR("Write domain conflict: " | 1768 | DRM_ERROR("Write domain conflict: " |
@@ -1625,19 +1803,11 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, | |||
1625 | continue; | 1803 | continue; |
1626 | } | 1804 | } |
1627 | 1805 | ||
1628 | /* Now that we're going to actually write some data in, | 1806 | ret = i915_gem_object_set_to_gtt_domain(obj, 1); |
1629 | * make sure that any rendering using this buffer's contents | 1807 | if (ret != 0) { |
1630 | * is completed. | 1808 | drm_gem_object_unreference(target_obj); |
1631 | */ | 1809 | i915_gem_object_unpin(obj); |
1632 | i915_gem_object_wait_rendering(obj); | 1810 | return -EINVAL; |
1633 | |||
1634 | /* As we're writing through the gtt, flush | ||
1635 | * any CPU writes before we write the relocations | ||
1636 | */ | ||
1637 | if (obj->write_domain & I915_GEM_DOMAIN_CPU) { | ||
1638 | i915_gem_clflush_object(obj); | ||
1639 | drm_agp_chipset_flush(dev); | ||
1640 | obj->write_domain = 0; | ||
1641 | } | 1811 | } |
1642 | 1812 | ||
1643 | /* Map the page containing the relocation we're going to | 1813 | /* Map the page containing the relocation we're going to |
@@ -1779,6 +1949,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, | |||
1779 | int ret, i, pinned = 0; | 1949 | int ret, i, pinned = 0; |
1780 | uint64_t exec_offset; | 1950 | uint64_t exec_offset; |
1781 | uint32_t seqno, flush_domains; | 1951 | uint32_t seqno, flush_domains; |
1952 | int pin_tries; | ||
1782 | 1953 | ||
1783 | #if WATCH_EXEC | 1954 | #if WATCH_EXEC |
1784 | DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", | 1955 | DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", |
@@ -1827,14 +1998,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, | |||
1827 | return -EBUSY; | 1998 | return -EBUSY; |
1828 | } | 1999 | } |
1829 | 2000 | ||
1830 | /* Zero the gloabl flush/invalidate flags. These | 2001 | /* Look up object handles */ |
1831 | * will be modified as each object is bound to the | ||
1832 | * gtt | ||
1833 | */ | ||
1834 | dev->invalidate_domains = 0; | ||
1835 | dev->flush_domains = 0; | ||
1836 | |||
1837 | /* Look up object handles and perform the relocations */ | ||
1838 | for (i = 0; i < args->buffer_count; i++) { | 2002 | for (i = 0; i < args->buffer_count; i++) { |
1839 | object_list[i] = drm_gem_object_lookup(dev, file_priv, | 2003 | object_list[i] = drm_gem_object_lookup(dev, file_priv, |
1840 | exec_list[i].handle); | 2004 | exec_list[i].handle); |
@@ -1844,17 +2008,39 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, | |||
1844 | ret = -EBADF; | 2008 | ret = -EBADF; |
1845 | goto err; | 2009 | goto err; |
1846 | } | 2010 | } |
2011 | } | ||
1847 | 2012 | ||
1848 | object_list[i]->pending_read_domains = 0; | 2013 | /* Pin and relocate */ |
1849 | object_list[i]->pending_write_domain = 0; | 2014 | for (pin_tries = 0; ; pin_tries++) { |
1850 | ret = i915_gem_object_pin_and_relocate(object_list[i], | 2015 | ret = 0; |
1851 | file_priv, | 2016 | for (i = 0; i < args->buffer_count; i++) { |
1852 | &exec_list[i]); | 2017 | object_list[i]->pending_read_domains = 0; |
1853 | if (ret) { | 2018 | object_list[i]->pending_write_domain = 0; |
1854 | DRM_ERROR("object bind and relocate failed %d\n", ret); | 2019 | ret = i915_gem_object_pin_and_relocate(object_list[i], |
2020 | file_priv, | ||
2021 | &exec_list[i]); | ||
2022 | if (ret) | ||
2023 | break; | ||
2024 | pinned = i + 1; | ||
2025 | } | ||
2026 | /* success */ | ||
2027 | if (ret == 0) | ||
2028 | break; | ||
2029 | |||
2030 | /* error other than GTT full, or we've already tried again */ | ||
2031 | if (ret != -ENOMEM || pin_tries >= 1) { | ||
2032 | DRM_ERROR("Failed to pin buffers %d\n", ret); | ||
1855 | goto err; | 2033 | goto err; |
1856 | } | 2034 | } |
1857 | pinned = i + 1; | 2035 | |
2036 | /* unpin all of our buffers */ | ||
2037 | for (i = 0; i < pinned; i++) | ||
2038 | i915_gem_object_unpin(object_list[i]); | ||
2039 | |||
2040 | /* evict everyone we can from the aperture */ | ||
2041 | ret = i915_gem_evict_everything(dev); | ||
2042 | if (ret) | ||
2043 | goto err; | ||
1858 | } | 2044 | } |
1859 | 2045 | ||
1860 | /* Set the pending read domains for the batch buffer to COMMAND */ | 2046 | /* Set the pending read domains for the batch buffer to COMMAND */ |
@@ -1864,21 +2050,37 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, | |||
1864 | 2050 | ||
1865 | i915_verify_inactive(dev, __FILE__, __LINE__); | 2051 | i915_verify_inactive(dev, __FILE__, __LINE__); |
1866 | 2052 | ||
2053 | /* Zero the global flush/invalidate flags. These | ||
2054 | * will be modified as new domains are computed | ||
2055 | * for each object | ||
2056 | */ | ||
2057 | dev->invalidate_domains = 0; | ||
2058 | dev->flush_domains = 0; | ||
2059 | |||
1867 | for (i = 0; i < args->buffer_count; i++) { | 2060 | for (i = 0; i < args->buffer_count; i++) { |
1868 | struct drm_gem_object *obj = object_list[i]; | 2061 | struct drm_gem_object *obj = object_list[i]; |
1869 | 2062 | ||
1870 | /* make sure all previous memory operations have passed */ | 2063 | /* Compute new gpu domains and update invalidate/flush */ |
1871 | ret = i915_gem_object_set_domain(obj, | 2064 | i915_gem_object_set_to_gpu_domain(obj, |
1872 | obj->pending_read_domains, | 2065 | obj->pending_read_domains, |
1873 | obj->pending_write_domain); | 2066 | obj->pending_write_domain); |
1874 | if (ret) | ||
1875 | goto err; | ||
1876 | } | 2067 | } |
1877 | 2068 | ||
1878 | i915_verify_inactive(dev, __FILE__, __LINE__); | 2069 | i915_verify_inactive(dev, __FILE__, __LINE__); |
1879 | 2070 | ||
1880 | /* Flush/invalidate caches and chipset buffer */ | 2071 | if (dev->invalidate_domains | dev->flush_domains) { |
1881 | flush_domains = i915_gem_dev_set_domain(dev); | 2072 | #if WATCH_EXEC |
2073 | DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", | ||
2074 | __func__, | ||
2075 | dev->invalidate_domains, | ||
2076 | dev->flush_domains); | ||
2077 | #endif | ||
2078 | i915_gem_flush(dev, | ||
2079 | dev->invalidate_domains, | ||
2080 | dev->flush_domains); | ||
2081 | if (dev->flush_domains) | ||
2082 | (void)i915_add_request(dev, dev->flush_domains); | ||
2083 | } | ||
1882 | 2084 | ||
1883 | i915_verify_inactive(dev, __FILE__, __LINE__); | 2085 | i915_verify_inactive(dev, __FILE__, __LINE__); |
1884 | 2086 | ||
@@ -1898,8 +2100,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, | |||
1898 | ~0); | 2100 | ~0); |
1899 | #endif | 2101 | #endif |
1900 | 2102 | ||
1901 | (void)i915_add_request(dev, flush_domains); | ||
1902 | |||
1903 | /* Exec the batchbuffer */ | 2103 | /* Exec the batchbuffer */ |
1904 | ret = i915_dispatch_gem_execbuffer(dev, args, exec_offset); | 2104 | ret = i915_dispatch_gem_execbuffer(dev, args, exec_offset); |
1905 | if (ret) { | 2105 | if (ret) { |
@@ -1927,10 +2127,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, | |||
1927 | i915_file_priv->mm.last_gem_seqno = seqno; | 2127 | i915_file_priv->mm.last_gem_seqno = seqno; |
1928 | for (i = 0; i < args->buffer_count; i++) { | 2128 | for (i = 0; i < args->buffer_count; i++) { |
1929 | struct drm_gem_object *obj = object_list[i]; | 2129 | struct drm_gem_object *obj = object_list[i]; |
1930 | struct drm_i915_gem_object *obj_priv = obj->driver_private; | ||
1931 | 2130 | ||
1932 | i915_gem_object_move_to_active(obj); | 2131 | i915_gem_object_move_to_active(obj, seqno); |
1933 | obj_priv->last_rendering_seqno = seqno; | ||
1934 | #if WATCH_LRU | 2132 | #if WATCH_LRU |
1935 | DRM_INFO("%s: move to exec list %p\n", __func__, obj); | 2133 | DRM_INFO("%s: move to exec list %p\n", __func__, obj); |
1936 | #endif | 2134 | #endif |
@@ -2061,11 +2259,7 @@ i915_gem_pin_ioctl(struct drm_device *dev, void *data, | |||
2061 | /* XXX - flush the CPU caches for pinned objects | 2259 | /* XXX - flush the CPU caches for pinned objects |
2062 | * as the X server doesn't manage domains yet | 2260 | * as the X server doesn't manage domains yet |
2063 | */ | 2261 | */ |
2064 | if (obj->write_domain & I915_GEM_DOMAIN_CPU) { | 2262 | i915_gem_object_flush_cpu_write_domain(obj); |
2065 | i915_gem_clflush_object(obj); | ||
2066 | drm_agp_chipset_flush(dev); | ||
2067 | obj->write_domain = 0; | ||
2068 | } | ||
2069 | args->offset = obj_priv->gtt_offset; | 2263 | args->offset = obj_priv->gtt_offset; |
2070 | drm_gem_object_unreference(obj); | 2264 | drm_gem_object_unreference(obj); |
2071 | mutex_unlock(&dev->struct_mutex); | 2265 | mutex_unlock(&dev->struct_mutex); |
@@ -2167,29 +2361,6 @@ void i915_gem_free_object(struct drm_gem_object *obj) | |||
2167 | drm_free(obj->driver_private, 1, DRM_MEM_DRIVER); | 2361 | drm_free(obj->driver_private, 1, DRM_MEM_DRIVER); |
2168 | } | 2362 | } |
2169 | 2363 | ||
2170 | static int | ||
2171 | i915_gem_set_domain(struct drm_gem_object *obj, | ||
2172 | struct drm_file *file_priv, | ||
2173 | uint32_t read_domains, | ||
2174 | uint32_t write_domain) | ||
2175 | { | ||
2176 | struct drm_device *dev = obj->dev; | ||
2177 | int ret; | ||
2178 | uint32_t flush_domains; | ||
2179 | |||
2180 | BUG_ON(!mutex_is_locked(&dev->struct_mutex)); | ||
2181 | |||
2182 | ret = i915_gem_object_set_domain(obj, read_domains, write_domain); | ||
2183 | if (ret) | ||
2184 | return ret; | ||
2185 | flush_domains = i915_gem_dev_set_domain(obj->dev); | ||
2186 | |||
2187 | if (flush_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) | ||
2188 | (void) i915_add_request(dev, flush_domains); | ||
2189 | |||
2190 | return 0; | ||
2191 | } | ||
2192 | |||
2193 | /** Unbinds all objects that are on the given buffer list. */ | 2364 | /** Unbinds all objects that are on the given buffer list. */ |
2194 | static int | 2365 | static int |
2195 | i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head) | 2366 | i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head) |
diff --git a/drivers/gpu/drm/i915/i915_gem_proc.c b/drivers/gpu/drm/i915/i915_gem_proc.c index 93de15b4c9a7..e8d5abe1250e 100644 --- a/drivers/gpu/drm/i915/i915_gem_proc.c +++ b/drivers/gpu/drm/i915/i915_gem_proc.c | |||
@@ -166,10 +166,9 @@ static int i915_gem_request_info(char *buf, char **start, off_t offset, | |||
166 | list_for_each_entry(gem_request, &dev_priv->mm.request_list, | 166 | list_for_each_entry(gem_request, &dev_priv->mm.request_list, |
167 | list) | 167 | list) |
168 | { | 168 | { |
169 | DRM_PROC_PRINT(" %d @ %d %08x\n", | 169 | DRM_PROC_PRINT(" %d @ %d\n", |
170 | gem_request->seqno, | 170 | gem_request->seqno, |
171 | (int) (jiffies - gem_request->emitted_jiffies), | 171 | (int) (jiffies - gem_request->emitted_jiffies)); |
172 | gem_request->flush_domains); | ||
173 | } | 172 | } |
174 | if (len > request + offset) | 173 | if (len > request + offset) |
175 | return request; | 174 | return request; |
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index e8b85ac4ca04..a8cb69469c64 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c | |||
@@ -119,9 +119,10 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) | |||
119 | dcc & DCC_CHANNEL_XOR_DISABLE) { | 119 | dcc & DCC_CHANNEL_XOR_DISABLE) { |
120 | swizzle_x = I915_BIT_6_SWIZZLE_9_10; | 120 | swizzle_x = I915_BIT_6_SWIZZLE_9_10; |
121 | swizzle_y = I915_BIT_6_SWIZZLE_9; | 121 | swizzle_y = I915_BIT_6_SWIZZLE_9; |
122 | } else if (IS_I965GM(dev) || IS_GM45(dev)) { | 122 | } else if ((IS_I965GM(dev) || IS_GM45(dev)) && |
123 | /* GM965 only does bit 11-based channel | 123 | (dcc & DCC_CHANNEL_XOR_BIT_17) == 0) { |
124 | * randomization | 124 | /* GM965/GM45 does either bit 11 or bit 17 |
125 | * swizzling. | ||
125 | */ | 126 | */ |
126 | swizzle_x = I915_BIT_6_SWIZZLE_9_10_11; | 127 | swizzle_x = I915_BIT_6_SWIZZLE_9_10_11; |
127 | swizzle_y = I915_BIT_6_SWIZZLE_9_11; | 128 | swizzle_y = I915_BIT_6_SWIZZLE_9_11; |
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 0e476eba36e6..9d24aaeb8a45 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h | |||
@@ -522,6 +522,7 @@ | |||
522 | #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0) | 522 | #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0) |
523 | #define DCC_ADDRESSING_MODE_MASK (3 << 0) | 523 | #define DCC_ADDRESSING_MODE_MASK (3 << 0) |
524 | #define DCC_CHANNEL_XOR_DISABLE (1 << 10) | 524 | #define DCC_CHANNEL_XOR_DISABLE (1 << 10) |
525 | #define DCC_CHANNEL_XOR_BIT_17 (1 << 9) | ||
525 | 526 | ||
526 | /** 965 MCH register controlling DRAM channel configuration */ | 527 | /** 965 MCH register controlling DRAM channel configuration */ |
527 | #define C0DRB3 0x10206 | 528 | #define C0DRB3 0x10206 |
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 7a183789be97..3bbb871b25d5 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h | |||
@@ -299,7 +299,6 @@ typedef struct drm_radeon_private { | |||
299 | atomic_t swi_emitted; | 299 | atomic_t swi_emitted; |
300 | int vblank_crtc; | 300 | int vblank_crtc; |
301 | uint32_t irq_enable_reg; | 301 | uint32_t irq_enable_reg; |
302 | int irq_enabled; | ||
303 | uint32_t r500_disp_irq_reg; | 302 | uint32_t r500_disp_irq_reg; |
304 | 303 | ||
305 | struct radeon_surface surfaces[RADEON_MAX_SURFACES]; | 304 | struct radeon_surface surfaces[RADEON_MAX_SURFACES]; |
diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c index 97c0599fdb1e..99be11418ac2 100644 --- a/drivers/gpu/drm/radeon/radeon_irq.c +++ b/drivers/gpu/drm/radeon/radeon_irq.c | |||
@@ -44,7 +44,8 @@ void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state) | |||
44 | else | 44 | else |
45 | dev_priv->irq_enable_reg &= ~mask; | 45 | dev_priv->irq_enable_reg &= ~mask; |
46 | 46 | ||
47 | RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); | 47 | if (!dev->irq_enabled) |
48 | RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); | ||
48 | } | 49 | } |
49 | 50 | ||
50 | static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state) | 51 | static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state) |
@@ -56,7 +57,8 @@ static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state) | |||
56 | else | 57 | else |
57 | dev_priv->r500_disp_irq_reg &= ~mask; | 58 | dev_priv->r500_disp_irq_reg &= ~mask; |
58 | 59 | ||
59 | RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg); | 60 | if (!dev->irq_enabled) |
61 | RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg); | ||
60 | } | 62 | } |
61 | 63 | ||
62 | int radeon_enable_vblank(struct drm_device *dev, int crtc) | 64 | int radeon_enable_vblank(struct drm_device *dev, int crtc) |
@@ -355,8 +357,6 @@ void radeon_driver_irq_uninstall(struct drm_device * dev) | |||
355 | if (!dev_priv) | 357 | if (!dev_priv) |
356 | return; | 358 | return; |
357 | 359 | ||
358 | dev_priv->irq_enabled = 0; | ||
359 | |||
360 | if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690) | 360 | if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690) |
361 | RADEON_WRITE(R500_DxMODE_INT_MASK, 0); | 361 | RADEON_WRITE(R500_DxMODE_INT_MASK, 0); |
362 | /* Disable *all* interrupts */ | 362 | /* Disable *all* interrupts */ |
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 57630402ea67..1a00bb7db872 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig | |||
@@ -669,10 +669,12 @@ config BLK_DEV_CELLEB | |||
669 | 669 | ||
670 | endif | 670 | endif |
671 | 671 | ||
672 | # TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF | ||
672 | config BLK_DEV_IDE_PMAC | 673 | config BLK_DEV_IDE_PMAC |
673 | tristate "PowerMac on-board IDE support" | 674 | tristate "PowerMac on-board IDE support" |
674 | depends on PPC_PMAC && IDE=y | 675 | depends on PPC_PMAC && IDE=y |
675 | select IDE_TIMINGS | 676 | select IDE_TIMINGS |
677 | select BLK_DEV_IDEDMA_PCI | ||
676 | help | 678 | help |
677 | This driver provides support for the on-board IDE controller on | 679 | This driver provides support for the on-board IDE controller on |
678 | most of the recent Apple Power Macintoshes and PowerBooks. | 680 | most of the recent Apple Power Macintoshes and PowerBooks. |
@@ -689,16 +691,6 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST | |||
689 | CD-ROM on hda. This option changes this to more natural hda for | 691 | CD-ROM on hda. This option changes this to more natural hda for |
690 | hard disk and hdc for CD-ROM. | 692 | hard disk and hdc for CD-ROM. |
691 | 693 | ||
692 | config BLK_DEV_IDEDMA_PMAC | ||
693 | bool "PowerMac IDE DMA support" | ||
694 | depends on BLK_DEV_IDE_PMAC | ||
695 | select BLK_DEV_IDEDMA_PCI | ||
696 | help | ||
697 | This option allows the driver for the on-board IDE controller on | ||
698 | Power Macintoshes and PowerBooks to use DMA (direct memory access) | ||
699 | to transfer data to and from memory. Saying Y is safe and improves | ||
700 | performance. | ||
701 | |||
702 | config BLK_DEV_IDE_AU1XXX | 694 | config BLK_DEV_IDE_AU1XXX |
703 | bool "IDE for AMD Alchemy Au1200" | 695 | bool "IDE for AMD Alchemy Au1200" |
704 | depends on SOC_AU1200 | 696 | depends on SOC_AU1200 |
@@ -912,7 +904,7 @@ config BLK_DEV_UMC8672 | |||
912 | endif | 904 | endif |
913 | 905 | ||
914 | config BLK_DEV_IDEDMA | 906 | config BLK_DEV_IDEDMA |
915 | def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \ | 907 | def_bool BLK_DEV_IDEDMA_SFF || \ |
916 | BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA | 908 | BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA |
917 | 909 | ||
918 | endif # IDE | 910 | endif # IDE |
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index e56c7b72f9e2..45d2356bb725 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c | |||
@@ -591,7 +591,7 @@ static int __init ali15x3_ide_init(void) | |||
591 | 591 | ||
592 | static void __exit ali15x3_ide_exit(void) | 592 | static void __exit ali15x3_ide_exit(void) |
593 | { | 593 | { |
594 | return pci_unregister_driver(&alim15x3_pci_driver); | 594 | pci_unregister_driver(&alim15x3_pci_driver); |
595 | } | 595 | } |
596 | 596 | ||
597 | module_init(ali15x3_ide_init); | 597 | module_init(ali15x3_ide_init); |
diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c index 81ec73134eda..c6bcd3014a29 100644 --- a/drivers/ide/amd74xx.c +++ b/drivers/ide/amd74xx.c | |||
@@ -3,7 +3,7 @@ | |||
3 | * IDE driver for Linux. | 3 | * IDE driver for Linux. |
4 | * | 4 | * |
5 | * Copyright (c) 2000-2002 Vojtech Pavlik | 5 | * Copyright (c) 2000-2002 Vojtech Pavlik |
6 | * Copyright (c) 2007 Bartlomiej Zolnierkiewicz | 6 | * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz |
7 | * | 7 | * |
8 | * Based on the work of: | 8 | * Based on the work of: |
9 | * Andre Hedrick | 9 | * Andre Hedrick |
@@ -263,6 +263,15 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_ | |||
263 | d.udma_mask = ATA_UDMA5; | 263 | d.udma_mask = ATA_UDMA5; |
264 | } | 264 | } |
265 | 265 | ||
266 | /* | ||
267 | * It seems that on some nVidia controllers using AltStatus | ||
268 | * register can be unreliable so default to Status register | ||
269 | * if the device is in Compatibility Mode. | ||
270 | */ | ||
271 | if (dev->vendor == PCI_VENDOR_ID_NVIDIA && | ||
272 | ide_pci_is_in_compatibility_mode(dev)) | ||
273 | d.host_flags |= IDE_HFLAG_BROKEN_ALTSTATUS; | ||
274 | |||
266 | printk(KERN_INFO "%s %s: UDMA%s controller\n", | 275 | printk(KERN_INFO "%s %s: UDMA%s controller\n", |
267 | d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]); | 276 | d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]); |
268 | 277 | ||
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 7162d67562af..cc35d6dbd410 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c | |||
@@ -132,10 +132,14 @@ int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors) | |||
132 | } | 132 | } |
133 | EXPORT_SYMBOL(ide_end_request); | 133 | EXPORT_SYMBOL(ide_end_request); |
134 | 134 | ||
135 | static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error) | 135 | static void ide_complete_power_step(ide_drive_t *drive, struct request *rq) |
136 | { | 136 | { |
137 | struct request_pm_state *pm = rq->data; | 137 | struct request_pm_state *pm = rq->data; |
138 | 138 | ||
139 | #ifdef DEBUG_PM | ||
140 | printk(KERN_INFO "%s: complete_power_step(step: %d)\n", | ||
141 | drive->name, pm->pm_step); | ||
142 | #endif | ||
139 | if (drive->media != ide_disk) | 143 | if (drive->media != ide_disk) |
140 | return; | 144 | return; |
141 | 145 | ||
@@ -172,7 +176,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * | |||
172 | /* Not supported? Switch to next step now. */ | 176 | /* Not supported? Switch to next step now. */ |
173 | if (ata_id_flush_enabled(drive->id) == 0 || | 177 | if (ata_id_flush_enabled(drive->id) == 0 || |
174 | (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) { | 178 | (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) { |
175 | ide_complete_power_step(drive, rq, 0, 0); | 179 | ide_complete_power_step(drive, rq); |
176 | return ide_stopped; | 180 | return ide_stopped; |
177 | } | 181 | } |
178 | if (ata_id_flush_ext_enabled(drive->id)) | 182 | if (ata_id_flush_ext_enabled(drive->id)) |
@@ -191,7 +195,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * | |||
191 | if (drive->media != ide_disk) | 195 | if (drive->media != ide_disk) |
192 | pm->pm_step = IDE_PM_RESTORE_DMA; | 196 | pm->pm_step = IDE_PM_RESTORE_DMA; |
193 | else | 197 | else |
194 | ide_complete_power_step(drive, rq, 0, 0); | 198 | ide_complete_power_step(drive, rq); |
195 | return ide_stopped; | 199 | return ide_stopped; |
196 | case IDE_PM_IDLE: /* Resume step 2 (idle) */ | 200 | case IDE_PM_IDLE: /* Resume step 2 (idle) */ |
197 | args->tf.command = ATA_CMD_IDLEIMMEDIATE; | 201 | args->tf.command = ATA_CMD_IDLEIMMEDIATE; |
@@ -322,11 +326,8 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) | |||
322 | } | 326 | } |
323 | } else if (blk_pm_request(rq)) { | 327 | } else if (blk_pm_request(rq)) { |
324 | struct request_pm_state *pm = rq->data; | 328 | struct request_pm_state *pm = rq->data; |
325 | #ifdef DEBUG_PM | 329 | |
326 | printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n", | 330 | ide_complete_power_step(drive, rq); |
327 | drive->name, rq->pm->pm_step, stat, err); | ||
328 | #endif | ||
329 | ide_complete_power_step(drive, rq, stat, err); | ||
330 | if (pm->pm_step == IDE_PM_COMPLETED) | 331 | if (pm->pm_step == IDE_PM_COMPLETED) |
331 | ide_complete_pm_request(drive, rq); | 332 | ide_complete_pm_request(drive, rq); |
332 | return; | 333 | return; |
@@ -804,7 +805,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) | |||
804 | struct request_pm_state *pm = rq->data; | 805 | struct request_pm_state *pm = rq->data; |
805 | #ifdef DEBUG_PM | 806 | #ifdef DEBUG_PM |
806 | printk("%s: start_power_step(step: %d)\n", | 807 | printk("%s: start_power_step(step: %d)\n", |
807 | drive->name, rq->pm->pm_step); | 808 | drive->name, pm->pm_step); |
808 | #endif | 809 | #endif |
809 | startstop = ide_start_power_step(drive, rq); | 810 | startstop = ide_start_power_step(drive, rq); |
810 | if (startstop == ide_stopped && | 811 | if (startstop == ide_stopped && |
@@ -967,14 +968,13 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) | |||
967 | ide_startstop_t startstop; | 968 | ide_startstop_t startstop; |
968 | int loops = 0; | 969 | int loops = 0; |
969 | 970 | ||
970 | /* for atari only: POSSIBLY BROKEN HERE(?) */ | ||
971 | ide_get_lock(ide_intr, hwgroup); | ||
972 | |||
973 | /* caller must own ide_lock */ | 971 | /* caller must own ide_lock */ |
974 | BUG_ON(!irqs_disabled()); | 972 | BUG_ON(!irqs_disabled()); |
975 | 973 | ||
976 | while (!hwgroup->busy) { | 974 | while (!hwgroup->busy) { |
977 | hwgroup->busy = 1; | 975 | hwgroup->busy = 1; |
976 | /* for atari only */ | ||
977 | ide_get_lock(ide_intr, hwgroup); | ||
978 | drive = choose_drive(hwgroup); | 978 | drive = choose_drive(hwgroup); |
979 | if (drive == NULL) { | 979 | if (drive == NULL) { |
980 | int sleeping = 0; | 980 | int sleeping = 0; |
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 5d6ba14e211d..c41c3b9b6f02 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c | |||
@@ -457,18 +457,14 @@ int drive_is_ready (ide_drive_t *drive) | |||
457 | if (drive->waiting_for_dma) | 457 | if (drive->waiting_for_dma) |
458 | return hwif->dma_ops->dma_test_irq(drive); | 458 | return hwif->dma_ops->dma_test_irq(drive); |
459 | 459 | ||
460 | #if 0 | ||
461 | /* need to guarantee 400ns since last command was issued */ | ||
462 | udelay(1); | ||
463 | #endif | ||
464 | |||
465 | /* | 460 | /* |
466 | * We do a passive status test under shared PCI interrupts on | 461 | * We do a passive status test under shared PCI interrupts on |
467 | * cards that truly share the ATA side interrupt, but may also share | 462 | * cards that truly share the ATA side interrupt, but may also share |
468 | * an interrupt with another pci card/device. We make no assumptions | 463 | * an interrupt with another pci card/device. We make no assumptions |
469 | * about possible isa-pnp and pci-pnp issues yet. | 464 | * about possible isa-pnp and pci-pnp issues yet. |
470 | */ | 465 | */ |
471 | if (hwif->io_ports.ctl_addr) | 466 | if (hwif->io_ports.ctl_addr && |
467 | (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) | ||
472 | stat = hwif->tp_ops->read_altstatus(hwif); | 468 | stat = hwif->tp_ops->read_altstatus(hwif); |
473 | else | 469 | else |
474 | /* Note: this may clear a pending IRQ!! */ | 470 | /* Note: this may clear a pending IRQ!! */ |
@@ -610,6 +606,7 @@ static const struct drive_list_entry ivb_list[] = { | |||
610 | { "TSSTcorp CDDVDW SH-S202N" , "SB01" }, | 606 | { "TSSTcorp CDDVDW SH-S202N" , "SB01" }, |
611 | { "TSSTcorp CDDVDW SH-S202H" , "SB00" }, | 607 | { "TSSTcorp CDDVDW SH-S202H" , "SB00" }, |
612 | { "TSSTcorp CDDVDW SH-S202H" , "SB01" }, | 608 | { "TSSTcorp CDDVDW SH-S202H" , "SB01" }, |
609 | { "SAMSUNG SP0822N" , "WA100-10" }, | ||
613 | { NULL , NULL } | 610 | { NULL , NULL } |
614 | }; | 611 | }; |
615 | 612 | ||
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 1649ea54f76c..c55bdbd22314 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c | |||
@@ -266,7 +266,8 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) | |||
266 | /* take a deep breath */ | 266 | /* take a deep breath */ |
267 | msleep(50); | 267 | msleep(50); |
268 | 268 | ||
269 | if (io_ports->ctl_addr) { | 269 | if (io_ports->ctl_addr && |
270 | (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) { | ||
270 | a = tp_ops->read_altstatus(hwif); | 271 | a = tp_ops->read_altstatus(hwif); |
271 | s = tp_ops->read_status(hwif); | 272 | s = tp_ops->read_status(hwif); |
272 | if ((a ^ s) & ~ATA_IDX) | 273 | if ((a ^ s) & ~ATA_IDX) |
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c index 2e19d6298536..7c481bb56fab 100644 --- a/drivers/ide/pmac.c +++ b/drivers/ide/pmac.c | |||
@@ -66,7 +66,6 @@ typedef struct pmac_ide_hwif { | |||
66 | struct macio_dev *mdev; | 66 | struct macio_dev *mdev; |
67 | u32 timings[4]; | 67 | u32 timings[4]; |
68 | volatile u32 __iomem * *kauai_fcr; | 68 | volatile u32 __iomem * *kauai_fcr; |
69 | #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC | ||
70 | /* Those fields are duplicating what is in hwif. We currently | 69 | /* Those fields are duplicating what is in hwif. We currently |
71 | * can't use the hwif ones because of some assumptions that are | 70 | * can't use the hwif ones because of some assumptions that are |
72 | * beeing done by the generic code about the kind of dma controller | 71 | * beeing done by the generic code about the kind of dma controller |
@@ -74,8 +73,6 @@ typedef struct pmac_ide_hwif { | |||
74 | */ | 73 | */ |
75 | volatile struct dbdma_regs __iomem * dma_regs; | 74 | volatile struct dbdma_regs __iomem * dma_regs; |
76 | struct dbdma_cmd* dma_table_cpu; | 75 | struct dbdma_cmd* dma_table_cpu; |
77 | #endif | ||
78 | |||
79 | } pmac_ide_hwif_t; | 76 | } pmac_ide_hwif_t; |
80 | 77 | ||
81 | enum { | 78 | enum { |
@@ -222,8 +219,6 @@ static const char* model_name[] = { | |||
222 | #define KAUAI_FCR_UATA_RESET_N 0x00000002 | 219 | #define KAUAI_FCR_UATA_RESET_N 0x00000002 |
223 | #define KAUAI_FCR_UATA_ENABLE 0x00000001 | 220 | #define KAUAI_FCR_UATA_ENABLE 0x00000001 |
224 | 221 | ||
225 | #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC | ||
226 | |||
227 | /* Rounded Multiword DMA timings | 222 | /* Rounded Multiword DMA timings |
228 | * | 223 | * |
229 | * I gave up finding a generic formula for all controller | 224 | * I gave up finding a generic formula for all controller |
@@ -413,8 +408,6 @@ static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq); | |||
413 | static void pmac_ide_selectproc(ide_drive_t *drive); | 408 | static void pmac_ide_selectproc(ide_drive_t *drive); |
414 | static void pmac_ide_kauai_selectproc(ide_drive_t *drive); | 409 | static void pmac_ide_kauai_selectproc(ide_drive_t *drive); |
415 | 410 | ||
416 | #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ | ||
417 | |||
418 | #define PMAC_IDE_REG(x) \ | 411 | #define PMAC_IDE_REG(x) \ |
419 | ((void __iomem *)((drive)->hwif->io_ports.data_addr + (x))) | 412 | ((void __iomem *)((drive)->hwif->io_ports.data_addr + (x))) |
420 | 413 | ||
@@ -584,8 +577,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
584 | pmac_ide_do_update_timings(drive); | 577 | pmac_ide_do_update_timings(drive); |
585 | } | 578 | } |
586 | 579 | ||
587 | #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC | ||
588 | |||
589 | /* | 580 | /* |
590 | * Calculate KeyLargo ATA/66 UDMA timings | 581 | * Calculate KeyLargo ATA/66 UDMA timings |
591 | */ | 582 | */ |
@@ -786,7 +777,6 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, | |||
786 | drive->name, speed & 0xf, *timings); | 777 | drive->name, speed & 0xf, *timings); |
787 | #endif | 778 | #endif |
788 | } | 779 | } |
789 | #endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */ | ||
790 | 780 | ||
791 | static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) | 781 | static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) |
792 | { | 782 | { |
@@ -804,7 +794,6 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) | |||
804 | tl[0] = *timings; | 794 | tl[0] = *timings; |
805 | tl[1] = *timings2; | 795 | tl[1] = *timings2; |
806 | 796 | ||
807 | #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC | ||
808 | if (speed >= XFER_UDMA_0) { | 797 | if (speed >= XFER_UDMA_0) { |
809 | if (pmif->kind == controller_kl_ata4) | 798 | if (pmif->kind == controller_kl_ata4) |
810 | ret = set_timings_udma_ata4(&tl[0], speed); | 799 | ret = set_timings_udma_ata4(&tl[0], speed); |
@@ -817,7 +806,7 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) | |||
817 | ret = -1; | 806 | ret = -1; |
818 | } else | 807 | } else |
819 | set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed); | 808 | set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed); |
820 | #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ | 809 | |
821 | if (ret) | 810 | if (ret) |
822 | return; | 811 | return; |
823 | 812 | ||
@@ -1008,9 +997,7 @@ static const struct ide_port_info pmac_port_info = { | |||
1008 | .chipset = ide_pmac, | 997 | .chipset = ide_pmac, |
1009 | .tp_ops = &pmac_tp_ops, | 998 | .tp_ops = &pmac_tp_ops, |
1010 | .port_ops = &pmac_ide_port_ops, | 999 | .port_ops = &pmac_ide_port_ops, |
1011 | #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC | ||
1012 | .dma_ops = &pmac_dma_ops, | 1000 | .dma_ops = &pmac_dma_ops, |
1013 | #endif | ||
1014 | .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | | 1001 | .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | |
1015 | IDE_HFLAG_POST_SET_MODE | | 1002 | IDE_HFLAG_POST_SET_MODE | |
1016 | IDE_HFLAG_MMIO | | 1003 | IDE_HFLAG_MMIO | |
@@ -1182,7 +1169,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) | |||
1182 | pmif->regbase = regbase; | 1169 | pmif->regbase = regbase; |
1183 | pmif->irq = irq; | 1170 | pmif->irq = irq; |
1184 | pmif->kauai_fcr = NULL; | 1171 | pmif->kauai_fcr = NULL; |
1185 | #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC | 1172 | |
1186 | if (macio_resource_count(mdev) >= 2) { | 1173 | if (macio_resource_count(mdev) >= 2) { |
1187 | if (macio_request_resource(mdev, 1, "ide-pmac (dma)")) | 1174 | if (macio_request_resource(mdev, 1, "ide-pmac (dma)")) |
1188 | printk(KERN_WARNING "ide-pmac: can't request DMA " | 1175 | printk(KERN_WARNING "ide-pmac: can't request DMA " |
@@ -1192,7 +1179,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) | |||
1192 | pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000); | 1179 | pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000); |
1193 | } else | 1180 | } else |
1194 | pmif->dma_regs = NULL; | 1181 | pmif->dma_regs = NULL; |
1195 | #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ | 1182 | |
1196 | dev_set_drvdata(&mdev->ofdev.dev, pmif); | 1183 | dev_set_drvdata(&mdev->ofdev.dev, pmif); |
1197 | 1184 | ||
1198 | memset(&hw, 0, sizeof(hw)); | 1185 | memset(&hw, 0, sizeof(hw)); |
@@ -1300,9 +1287,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) | |||
1300 | 1287 | ||
1301 | base = ioremap(rbase, rlen); | 1288 | base = ioremap(rbase, rlen); |
1302 | pmif->regbase = (unsigned long) base + 0x2000; | 1289 | pmif->regbase = (unsigned long) base + 0x2000; |
1303 | #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC | ||
1304 | pmif->dma_regs = base + 0x1000; | 1290 | pmif->dma_regs = base + 0x1000; |
1305 | #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ | ||
1306 | pmif->kauai_fcr = base; | 1291 | pmif->kauai_fcr = base; |
1307 | pmif->irq = pdev->irq; | 1292 | pmif->irq = pdev->irq; |
1308 | 1293 | ||
@@ -1434,8 +1419,6 @@ out: | |||
1434 | return error; | 1419 | return error; |
1435 | } | 1420 | } |
1436 | 1421 | ||
1437 | #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC | ||
1438 | |||
1439 | /* | 1422 | /* |
1440 | * pmac_ide_build_dmatable builds the DBDMA command list | 1423 | * pmac_ide_build_dmatable builds the DBDMA command list |
1441 | * for a transfer and sets the DBDMA channel to point to it. | 1424 | * for a transfer and sets the DBDMA channel to point to it. |
@@ -1723,13 +1706,6 @@ static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, | |||
1723 | 1706 | ||
1724 | return 0; | 1707 | return 0; |
1725 | } | 1708 | } |
1726 | #else | ||
1727 | static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, | ||
1728 | const struct ide_port_info *d) | ||
1729 | { | ||
1730 | return -EOPNOTSUPP; | ||
1731 | } | ||
1732 | #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ | ||
1733 | 1709 | ||
1734 | module_init(pmac_ide_probe); | 1710 | module_init(pmac_ide_probe); |
1735 | 1711 | ||
diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c index 7defa0ae2014..a687a7dfea6f 100644 --- a/drivers/ide/sgiioc4.c +++ b/drivers/ide/sgiioc4.c | |||
@@ -550,7 +550,7 @@ static const struct ide_dma_ops sgiioc4_dma_ops = { | |||
550 | .dma_timeout = ide_dma_timeout, | 550 | .dma_timeout = ide_dma_timeout, |
551 | }; | 551 | }; |
552 | 552 | ||
553 | static const struct ide_port_info sgiioc4_port_info __devinitdata = { | 553 | static const struct ide_port_info sgiioc4_port_info __devinitconst = { |
554 | .name = DRV_NAME, | 554 | .name = DRV_NAME, |
555 | .chipset = ide_pci, | 555 | .chipset = ide_pci, |
556 | .init_dma = ide_dma_sgiioc4, | 556 | .init_dma = ide_dma_sgiioc4, |
@@ -633,7 +633,7 @@ out: | |||
633 | return ret; | 633 | return ret; |
634 | } | 634 | } |
635 | 635 | ||
636 | int | 636 | int __devinit |
637 | ioc4_ide_attach_one(struct ioc4_driver_data *idd) | 637 | ioc4_ide_attach_one(struct ioc4_driver_data *idd) |
638 | { | 638 | { |
639 | /* PCI-RT does not bring out IDE connection. | 639 | /* PCI-RT does not bring out IDE connection. |
@@ -645,7 +645,7 @@ ioc4_ide_attach_one(struct ioc4_driver_data *idd) | |||
645 | return pci_init_sgiioc4(idd->idd_pdev); | 645 | return pci_init_sgiioc4(idd->idd_pdev); |
646 | } | 646 | } |
647 | 647 | ||
648 | static struct ioc4_submodule ioc4_ide_submodule = { | 648 | static struct ioc4_submodule __devinitdata ioc4_ide_submodule = { |
649 | .is_name = "IOC4_ide", | 649 | .is_name = "IOC4_ide", |
650 | .is_owner = THIS_MODULE, | 650 | .is_owner = THIS_MODULE, |
651 | .is_probe = ioc4_ide_attach_one, | 651 | .is_probe = ioc4_ide_attach_one, |
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 9e39f73282ee..d333ae22459c 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c | |||
@@ -1685,6 +1685,7 @@ static int nodemgr_host_thread(void *data) | |||
1685 | g = get_hpsb_generation(host); | 1685 | g = get_hpsb_generation(host); |
1686 | for (i = 0; i < 4 ; i++) { | 1686 | for (i = 0; i < 4 ; i++) { |
1687 | msleep_interruptible(63); | 1687 | msleep_interruptible(63); |
1688 | try_to_freeze(); | ||
1688 | if (kthread_should_stop()) | 1689 | if (kthread_should_stop()) |
1689 | goto exit; | 1690 | goto exit; |
1690 | 1691 | ||
@@ -1725,6 +1726,7 @@ static int nodemgr_host_thread(void *data) | |||
1725 | /* Sleep 3 seconds */ | 1726 | /* Sleep 3 seconds */ |
1726 | for (i = 3000/200; i; i--) { | 1727 | for (i = 3000/200; i; i--) { |
1727 | msleep_interruptible(200); | 1728 | msleep_interruptible(200); |
1729 | try_to_freeze(); | ||
1728 | if (kthread_should_stop()) | 1730 | if (kthread_should_stop()) |
1729 | goto exit; | 1731 | goto exit; |
1730 | 1732 | ||
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 69e674ecf19a..db22fd9b4cf2 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c | |||
@@ -101,7 +101,7 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id) | |||
101 | if (cpu_is_omap24xx()) { | 101 | if (cpu_is_omap24xx()) { |
102 | int i; | 102 | int i; |
103 | for (i = 0; i < omap_kp->rows; i++) | 103 | for (i = 0; i < omap_kp->rows; i++) |
104 | disable_irq(OMAP_GPIO_IRQ(row_gpios[i])); | 104 | disable_irq(gpio_to_irq(row_gpios[i])); |
105 | } else | 105 | } else |
106 | /* disable keyboard interrupt and schedule for handling */ | 106 | /* disable keyboard interrupt and schedule for handling */ |
107 | omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 107 | omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); |
@@ -224,7 +224,7 @@ static void omap_kp_tasklet(unsigned long data) | |||
224 | if (cpu_is_omap24xx()) { | 224 | if (cpu_is_omap24xx()) { |
225 | int i; | 225 | int i; |
226 | for (i = 0; i < omap_kp_data->rows; i++) | 226 | for (i = 0; i < omap_kp_data->rows; i++) |
227 | enable_irq(OMAP_GPIO_IRQ(row_gpios[i])); | 227 | enable_irq(gpio_to_irq(row_gpios[i])); |
228 | } else { | 228 | } else { |
229 | omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 229 | omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); |
230 | kp_cur_group = -1; | 230 | kp_cur_group = -1; |
@@ -397,7 +397,7 @@ static int __init omap_kp_probe(struct platform_device *pdev) | |||
397 | omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 397 | omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); |
398 | } else { | 398 | } else { |
399 | for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) { | 399 | for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) { |
400 | if (request_irq(OMAP_GPIO_IRQ(row_gpios[irq_idx]), | 400 | if (request_irq(gpio_to_irq(row_gpios[irq_idx]), |
401 | omap_kp_interrupt, | 401 | omap_kp_interrupt, |
402 | IRQF_TRIGGER_FALLING, | 402 | IRQF_TRIGGER_FALLING, |
403 | "omap-keypad", omap_kp) < 0) | 403 | "omap-keypad", omap_kp) < 0) |
@@ -438,7 +438,7 @@ static int omap_kp_remove(struct platform_device *pdev) | |||
438 | gpio_free(col_gpios[i]); | 438 | gpio_free(col_gpios[i]); |
439 | for (i = 0; i < omap_kp->rows; i++) { | 439 | for (i = 0; i < omap_kp->rows; i++) { |
440 | gpio_free(row_gpios[i]); | 440 | gpio_free(row_gpios[i]); |
441 | free_irq(OMAP_GPIO_IRQ(row_gpios[i]), 0); | 441 | free_irq(gpio_to_irq(row_gpios[i]), 0); |
442 | } | 442 | } |
443 | } else { | 443 | } else { |
444 | omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 444 | omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); |
diff --git a/drivers/isdn/hardware/avm/b1isa.c b/drivers/isdn/hardware/avm/b1isa.c index 1e288eeb5e2a..6461a32bc838 100644 --- a/drivers/isdn/hardware/avm/b1isa.c +++ b/drivers/isdn/hardware/avm/b1isa.c | |||
@@ -233,10 +233,8 @@ static void __exit b1isa_exit(void) | |||
233 | int i; | 233 | int i; |
234 | 234 | ||
235 | for (i = 0; i < MAX_CARDS; i++) { | 235 | for (i = 0; i < MAX_CARDS; i++) { |
236 | if (!io[i]) | 236 | if (isa_dev[i].resource[0].start) |
237 | break; | 237 | b1isa_remove(&isa_dev[i]); |
238 | |||
239 | b1isa_remove(&isa_dev[i]); | ||
240 | } | 238 | } |
241 | unregister_capi_driver(&capi_driver_b1isa); | 239 | unregister_capi_driver(&capi_driver_b1isa); |
242 | } | 240 | } |
diff --git a/drivers/isdn/hysdn/hysdn_net.c b/drivers/isdn/hysdn/hysdn_net.c index cfa8fa5e44ab..3f2a0a20c19b 100644 --- a/drivers/isdn/hysdn/hysdn_net.c +++ b/drivers/isdn/hysdn/hysdn_net.c | |||
@@ -83,12 +83,12 @@ net_open(struct net_device *dev) | |||
83 | 83 | ||
84 | /* Fill in the MAC-level header (if not already set) */ | 84 | /* Fill in the MAC-level header (if not already set) */ |
85 | if (!card->mac_addr[0]) { | 85 | if (!card->mac_addr[0]) { |
86 | for (i = 0; i < ETH_ALEN - sizeof(unsigned long); i++) | 86 | for (i = 0; i < ETH_ALEN; i++) |
87 | dev->dev_addr[i] = 0xfc; | 87 | dev->dev_addr[i] = 0xfc; |
88 | if ((in_dev = dev->ip_ptr) != NULL) { | 88 | if ((in_dev = dev->ip_ptr) != NULL) { |
89 | struct in_ifaddr *ifa = in_dev->ifa_list; | 89 | struct in_ifaddr *ifa = in_dev->ifa_list; |
90 | if (ifa != NULL) | 90 | if (ifa != NULL) |
91 | memcpy(dev->dev_addr + (ETH_ALEN - sizeof(unsigned long)), &ifa->ifa_local, sizeof(unsigned long)); | 91 | memcpy(dev->dev_addr + (ETH_ALEN - sizeof(ifa->ifa_local)), &ifa->ifa_local, sizeof(ifa->ifa_local)); |
92 | } | 92 | } |
93 | } else | 93 | } else |
94 | memcpy(dev->dev_addr, card->mac_addr, ETH_ALEN); | 94 | memcpy(dev->dev_addr, card->mac_addr, ETH_ALEN); |
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index a63161aec487..04e5fd742c2c 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c | |||
@@ -668,7 +668,7 @@ static void check_for_valid_limits(struct io_restrictions *rs) | |||
668 | if (!rs->max_segment_size) | 668 | if (!rs->max_segment_size) |
669 | rs->max_segment_size = MAX_SEGMENT_SIZE; | 669 | rs->max_segment_size = MAX_SEGMENT_SIZE; |
670 | if (!rs->seg_boundary_mask) | 670 | if (!rs->seg_boundary_mask) |
671 | rs->seg_boundary_mask = -1; | 671 | rs->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK; |
672 | if (!rs->bounce_pfn) | 672 | if (!rs->bounce_pfn) |
673 | rs->bounce_pfn = -1; | 673 | rs->bounce_pfn = -1; |
674 | } | 674 | } |
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 84bdc2ee69e6..a443e136dc41 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c | |||
@@ -354,7 +354,7 @@ static inline void i2o_block_sglist_free(struct i2o_block_request *ireq) | |||
354 | * @req: the request to prepare | 354 | * @req: the request to prepare |
355 | * | 355 | * |
356 | * Allocate the necessary i2o_block_request struct and connect it to | 356 | * Allocate the necessary i2o_block_request struct and connect it to |
357 | * the request. This is needed that we not loose the SG list later on. | 357 | * the request. This is needed that we not lose the SG list later on. |
358 | * | 358 | * |
359 | * Returns BLKPREP_OK on success or BLKPREP_DEFER on failure. | 359 | * Returns BLKPREP_OK on success or BLKPREP_DEFER on failure. |
360 | */ | 360 | */ |
diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index be2b5926d26c..6e53a30bfd38 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c | |||
@@ -49,7 +49,6 @@ static int i2o_hrt_get(struct i2o_controller *c); | |||
49 | /** | 49 | /** |
50 | * i2o_msg_get_wait - obtain an I2O message from the IOP | 50 | * i2o_msg_get_wait - obtain an I2O message from the IOP |
51 | * @c: I2O controller | 51 | * @c: I2O controller |
52 | * @msg: pointer to a I2O message pointer | ||
53 | * @wait: how long to wait until timeout | 52 | * @wait: how long to wait until timeout |
54 | * | 53 | * |
55 | * This function waits up to wait seconds for a message slot to be | 54 | * This function waits up to wait seconds for a message slot to be |
diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c index 8c389d606c30..3ee698ad8599 100644 --- a/drivers/misc/sgi-gru/grufault.c +++ b/drivers/misc/sgi-gru/grufault.c | |||
@@ -254,7 +254,11 @@ static int atomic_pte_lookup(struct vm_area_struct *vma, unsigned long vaddr, | |||
254 | return 1; | 254 | return 1; |
255 | 255 | ||
256 | *paddr = pte_pfn(pte) << PAGE_SHIFT; | 256 | *paddr = pte_pfn(pte) << PAGE_SHIFT; |
257 | #ifdef CONFIG_HUGETLB_PAGE | ||
257 | *pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT; | 258 | *pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT; |
259 | #else | ||
260 | *pageshift = PAGE_SHIFT; | ||
261 | #endif | ||
258 | return 0; | 262 | return 0; |
259 | 263 | ||
260 | err: | 264 | err: |
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 5c027b6b4e5a..650983806392 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c | |||
@@ -481,7 +481,7 @@ struct vm_operations_struct gru_vm_ops = { | |||
481 | .fault = gru_fault, | 481 | .fault = gru_fault, |
482 | }; | 482 | }; |
483 | 483 | ||
484 | module_init(gru_init); | 484 | fs_initcall(gru_init); |
485 | module_exit(gru_exit); | 485 | module_exit(gru_exit); |
486 | 486 | ||
487 | module_param(gru_options, ulong, 0644); | 487 | module_param(gru_options, ulong, 0644); |
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 76a76751da36..6659b2275c0c 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c | |||
@@ -37,9 +37,9 @@ | |||
37 | #define OPCODE_NORM_READ 0x03 /* Read data bytes (low frequency) */ | 37 | #define OPCODE_NORM_READ 0x03 /* Read data bytes (low frequency) */ |
38 | #define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ | 38 | #define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ |
39 | #define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ | 39 | #define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ |
40 | #define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ | 40 | #define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ |
41 | #define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ | 41 | #define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ |
42 | #define OPCODE_BE 0xc7 /* Erase whole flash block */ | 42 | #define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */ |
43 | #define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ | 43 | #define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ |
44 | #define OPCODE_RDID 0x9f /* Read JEDEC ID */ | 44 | #define OPCODE_RDID 0x9f /* Read JEDEC ID */ |
45 | 45 | ||
@@ -167,7 +167,7 @@ static int wait_till_ready(struct m25p *flash) | |||
167 | * | 167 | * |
168 | * Returns 0 if successful, non-zero otherwise. | 168 | * Returns 0 if successful, non-zero otherwise. |
169 | */ | 169 | */ |
170 | static int erase_block(struct m25p *flash) | 170 | static int erase_chip(struct m25p *flash) |
171 | { | 171 | { |
172 | DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB\n", | 172 | DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB\n", |
173 | flash->spi->dev.bus_id, __func__, | 173 | flash->spi->dev.bus_id, __func__, |
@@ -181,7 +181,7 @@ static int erase_block(struct m25p *flash) | |||
181 | write_enable(flash); | 181 | write_enable(flash); |
182 | 182 | ||
183 | /* Set up command buffer. */ | 183 | /* Set up command buffer. */ |
184 | flash->command[0] = OPCODE_BE; | 184 | flash->command[0] = OPCODE_CHIP_ERASE; |
185 | 185 | ||
186 | spi_write(flash->spi, flash->command, 1); | 186 | spi_write(flash->spi, flash->command, 1); |
187 | 187 | ||
@@ -250,15 +250,18 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr) | |||
250 | 250 | ||
251 | mutex_lock(&flash->lock); | 251 | mutex_lock(&flash->lock); |
252 | 252 | ||
253 | /* REVISIT in some cases we could speed up erasing large regions | 253 | /* whole-chip erase? */ |
254 | * by using OPCODE_SE instead of OPCODE_BE_4K | 254 | if (len == flash->mtd.size && erase_chip(flash)) { |
255 | */ | ||
256 | |||
257 | /* now erase those sectors */ | ||
258 | if (len == flash->mtd.size && erase_block(flash)) { | ||
259 | instr->state = MTD_ERASE_FAILED; | 255 | instr->state = MTD_ERASE_FAILED; |
260 | mutex_unlock(&flash->lock); | 256 | mutex_unlock(&flash->lock); |
261 | return -EIO; | 257 | return -EIO; |
258 | |||
259 | /* REVISIT in some cases we could speed up erasing large regions | ||
260 | * by using OPCODE_SE instead of OPCODE_BE_4K. We may have set up | ||
261 | * to use "small sector erase", but that's not always optimal. | ||
262 | */ | ||
263 | |||
264 | /* "sector"-at-a-time erase */ | ||
262 | } else { | 265 | } else { |
263 | while (len) { | 266 | while (len) { |
264 | if (erase_sector(flash, addr)) { | 267 | if (erase_sector(flash, addr)) { |
@@ -574,10 +577,11 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi) | |||
574 | for (tmp = 0, info = m25p_data; | 577 | for (tmp = 0, info = m25p_data; |
575 | tmp < ARRAY_SIZE(m25p_data); | 578 | tmp < ARRAY_SIZE(m25p_data); |
576 | tmp++, info++) { | 579 | tmp++, info++) { |
577 | if (info->jedec_id == jedec) | 580 | if (info->jedec_id == jedec) { |
578 | if (ext_jedec != 0 && info->ext_id != ext_jedec) | 581 | if (info->ext_id != 0 && info->ext_id != ext_jedec) |
579 | continue; | 582 | continue; |
580 | return info; | 583 | return info; |
584 | } | ||
581 | } | 585 | } |
582 | dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec); | 586 | dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec); |
583 | return NULL; | 587 | return NULL; |
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index 42d844f8f6bf..dfbf3f270cea 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c | |||
@@ -19,7 +19,7 @@ | |||
19 | #include <linux/mtd/partitions.h> | 19 | #include <linux/mtd/partitions.h> |
20 | #include <linux/mtd/physmap.h> | 20 | #include <linux/mtd/physmap.h> |
21 | #include <linux/mtd/concat.h> | 21 | #include <linux/mtd/concat.h> |
22 | #include <asm/io.h> | 22 | #include <linux/io.h> |
23 | 23 | ||
24 | #define MAX_RESOURCES 4 | 24 | #define MAX_RESOURCES 4 |
25 | 25 | ||
@@ -27,7 +27,6 @@ struct physmap_flash_info { | |||
27 | struct mtd_info *mtd[MAX_RESOURCES]; | 27 | struct mtd_info *mtd[MAX_RESOURCES]; |
28 | struct mtd_info *cmtd; | 28 | struct mtd_info *cmtd; |
29 | struct map_info map[MAX_RESOURCES]; | 29 | struct map_info map[MAX_RESOURCES]; |
30 | struct resource *res; | ||
31 | #ifdef CONFIG_MTD_PARTITIONS | 30 | #ifdef CONFIG_MTD_PARTITIONS |
32 | int nr_parts; | 31 | int nr_parts; |
33 | struct mtd_partition *parts; | 32 | struct mtd_partition *parts; |
@@ -70,16 +69,7 @@ static int physmap_flash_remove(struct platform_device *dev) | |||
70 | #endif | 69 | #endif |
71 | map_destroy(info->mtd[i]); | 70 | map_destroy(info->mtd[i]); |
72 | } | 71 | } |
73 | |||
74 | if (info->map[i].virt != NULL) | ||
75 | iounmap(info->map[i].virt); | ||
76 | } | ||
77 | |||
78 | if (info->res != NULL) { | ||
79 | release_resource(info->res); | ||
80 | kfree(info->res); | ||
81 | } | 72 | } |
82 | |||
83 | return 0; | 73 | return 0; |
84 | } | 74 | } |
85 | 75 | ||
@@ -101,7 +91,8 @@ static int physmap_flash_probe(struct platform_device *dev) | |||
101 | if (physmap_data == NULL) | 91 | if (physmap_data == NULL) |
102 | return -ENODEV; | 92 | return -ENODEV; |
103 | 93 | ||
104 | info = kzalloc(sizeof(struct physmap_flash_info), GFP_KERNEL); | 94 | info = devm_kzalloc(&dev->dev, sizeof(struct physmap_flash_info), |
95 | GFP_KERNEL); | ||
105 | if (info == NULL) { | 96 | if (info == NULL) { |
106 | err = -ENOMEM; | 97 | err = -ENOMEM; |
107 | goto err_out; | 98 | goto err_out; |
@@ -114,10 +105,10 @@ static int physmap_flash_probe(struct platform_device *dev) | |||
114 | (unsigned long long)(dev->resource[i].end - dev->resource[i].start + 1), | 105 | (unsigned long long)(dev->resource[i].end - dev->resource[i].start + 1), |
115 | (unsigned long long)dev->resource[i].start); | 106 | (unsigned long long)dev->resource[i].start); |
116 | 107 | ||
117 | info->res = request_mem_region(dev->resource[i].start, | 108 | if (!devm_request_mem_region(&dev->dev, |
118 | dev->resource[i].end - dev->resource[i].start + 1, | 109 | dev->resource[i].start, |
119 | dev->dev.bus_id); | 110 | dev->resource[i].end - dev->resource[i].start + 1, |
120 | if (info->res == NULL) { | 111 | dev->dev.bus_id)) { |
121 | dev_err(&dev->dev, "Could not reserve memory region\n"); | 112 | dev_err(&dev->dev, "Could not reserve memory region\n"); |
122 | err = -ENOMEM; | 113 | err = -ENOMEM; |
123 | goto err_out; | 114 | goto err_out; |
@@ -129,7 +120,8 @@ static int physmap_flash_probe(struct platform_device *dev) | |||
129 | info->map[i].bankwidth = physmap_data->width; | 120 | info->map[i].bankwidth = physmap_data->width; |
130 | info->map[i].set_vpp = physmap_data->set_vpp; | 121 | info->map[i].set_vpp = physmap_data->set_vpp; |
131 | 122 | ||
132 | info->map[i].virt = ioremap(info->map[i].phys, info->map[i].size); | 123 | info->map[i].virt = devm_ioremap(&dev->dev, info->map[i].phys, |
124 | info->map[i].size); | ||
133 | if (info->map[i].virt == NULL) { | 125 | if (info->map[i].virt == NULL) { |
134 | dev_err(&dev->dev, "Failed to ioremap flash region\n"); | 126 | dev_err(&dev->dev, "Failed to ioremap flash region\n"); |
135 | err = EIO; | 127 | err = EIO; |
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c index 024e3fffd4bb..a83192f80eba 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/fsl_upm.c | |||
@@ -163,9 +163,11 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun, | |||
163 | ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0); | 163 | ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0); |
164 | 164 | ||
165 | #ifdef CONFIG_MTD_OF_PARTS | 165 | #ifdef CONFIG_MTD_OF_PARTS |
166 | if (ret == 0) | 166 | if (ret == 0) { |
167 | ret = of_mtd_parse_partitions(fun->dev, &fun->mtd, | 167 | ret = of_mtd_parse_partitions(fun->dev, flash_np, &fun->parts); |
168 | flash_np, &fun->parts); | 168 | if (ret < 0) |
169 | goto err; | ||
170 | } | ||
169 | #endif | 171 | #endif |
170 | if (ret > 0) | 172 | if (ret > 0) |
171 | ret = add_mtd_partitions(&fun->mtd, fun->parts, ret); | 173 | ret = add_mtd_partitions(&fun->mtd, fun->parts, ret); |
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 75c899039023..9bd6c9ac8443 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c | |||
@@ -141,6 +141,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev, | |||
141 | } | 141 | } |
142 | 142 | ||
143 | lpcctl = pci_resource_start(pdev, 0); | 143 | lpcctl = pci_resource_start(pdev, 0); |
144 | pci_dev_put(pdev); | ||
144 | 145 | ||
145 | if (!request_region(lpcctl, 4, driver_name)) { | 146 | if (!request_region(lpcctl, 4, driver_name)) { |
146 | err = -EBUSY; | 147 | err = -EBUSY; |
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index ce5752ab579d..fc4144495610 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c | |||
@@ -269,6 +269,7 @@ static struct pxa3xx_nand_timing stm2GbX16_timing = { | |||
269 | 269 | ||
270 | static struct pxa3xx_nand_flash stm2GbX16 = { | 270 | static struct pxa3xx_nand_flash stm2GbX16 = { |
271 | .timing = &stm2GbX16_timing, | 271 | .timing = &stm2GbX16_timing, |
272 | .cmdset = &largepage_cmdset, | ||
272 | .page_per_block = 64, | 273 | .page_per_block = 64, |
273 | .page_size = 2048, | 274 | .page_size = 2048, |
274 | .flash_width = 16, | 275 | .flash_width = 16, |
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index e39b21d3e168..d1e0b8e7224b 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c | |||
@@ -32,19 +32,18 @@ | |||
32 | #include <linux/platform_device.h> | 32 | #include <linux/platform_device.h> |
33 | #include <linux/interrupt.h> | 33 | #include <linux/interrupt.h> |
34 | #include <linux/delay.h> | 34 | #include <linux/delay.h> |
35 | #include <linux/dma-mapping.h> | ||
36 | #include <linux/io.h> | ||
35 | 37 | ||
36 | #include <asm/io.h> | ||
37 | #include <asm/mach/flash.h> | 38 | #include <asm/mach/flash.h> |
38 | #include <asm/arch/gpmc.h> | 39 | #include <mach/gpmc.h> |
39 | #include <asm/arch/onenand.h> | 40 | #include <mach/onenand.h> |
40 | #include <asm/arch/gpio.h> | 41 | #include <mach/gpio.h> |
41 | #include <asm/arch/pm.h> | 42 | #include <mach/pm.h> |
42 | 43 | ||
43 | #include <linux/dma-mapping.h> | 44 | #include <mach/dma.h> |
44 | #include <asm/dma-mapping.h> | ||
45 | #include <asm/arch/dma.h> | ||
46 | 45 | ||
47 | #include <asm/arch/board.h> | 46 | #include <mach/board.h> |
48 | 47 | ||
49 | #define DRIVER_NAME "omap2-onenand" | 48 | #define DRIVER_NAME "omap2-onenand" |
50 | 49 | ||
@@ -150,7 +149,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state) | |||
150 | 149 | ||
151 | INIT_COMPLETION(c->irq_done); | 150 | INIT_COMPLETION(c->irq_done); |
152 | if (c->gpio_irq) { | 151 | if (c->gpio_irq) { |
153 | result = omap_get_gpio_datain(c->gpio_irq); | 152 | result = gpio_get_value(c->gpio_irq); |
154 | if (result == -1) { | 153 | if (result == -1) { |
155 | ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); | 154 | ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); |
156 | intr = read_reg(c, ONENAND_REG_INTERRUPT); | 155 | intr = read_reg(c, ONENAND_REG_INTERRUPT); |
@@ -635,9 +634,9 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) | |||
635 | "OneNAND\n", c->gpio_irq); | 634 | "OneNAND\n", c->gpio_irq); |
636 | goto err_iounmap; | 635 | goto err_iounmap; |
637 | } | 636 | } |
638 | omap_set_gpio_direction(c->gpio_irq, 1); | 637 | gpio_direction_input(c->gpio_irq); |
639 | 638 | ||
640 | if ((r = request_irq(OMAP_GPIO_IRQ(c->gpio_irq), | 639 | if ((r = request_irq(gpio_to_irq(c->gpio_irq), |
641 | omap2_onenand_interrupt, IRQF_TRIGGER_RISING, | 640 | omap2_onenand_interrupt, IRQF_TRIGGER_RISING, |
642 | pdev->dev.driver->name, c)) < 0) | 641 | pdev->dev.driver->name, c)) < 0) |
643 | goto err_release_gpio; | 642 | goto err_release_gpio; |
@@ -724,7 +723,7 @@ err_release_dma: | |||
724 | if (c->dma_channel != -1) | 723 | if (c->dma_channel != -1) |
725 | omap_free_dma(c->dma_channel); | 724 | omap_free_dma(c->dma_channel); |
726 | if (c->gpio_irq) | 725 | if (c->gpio_irq) |
727 | free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c); | 726 | free_irq(gpio_to_irq(c->gpio_irq), c); |
728 | err_release_gpio: | 727 | err_release_gpio: |
729 | if (c->gpio_irq) | 728 | if (c->gpio_irq) |
730 | omap_free_gpio(c->gpio_irq); | 729 | omap_free_gpio(c->gpio_irq); |
@@ -761,7 +760,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) | |||
761 | omap2_onenand_shutdown(pdev); | 760 | omap2_onenand_shutdown(pdev); |
762 | platform_set_drvdata(pdev, NULL); | 761 | platform_set_drvdata(pdev, NULL); |
763 | if (c->gpio_irq) { | 762 | if (c->gpio_irq) { |
764 | free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c); | 763 | free_irq(gpio_to_irq(c->gpio_irq), c); |
765 | omap_free_gpio(c->gpio_irq); | 764 | omap_free_gpio(c->gpio_irq); |
766 | } | 765 | } |
767 | iounmap(c->onenand.base); | 766 | iounmap(c->onenand.base); |
diff --git a/drivers/net/Makefile b/drivers/net/Makefile index f19acf8b9220..017383ad5ec6 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile | |||
@@ -114,7 +114,7 @@ obj-$(CONFIG_EL2) += 3c503.o 8390p.o | |||
114 | obj-$(CONFIG_NE2000) += ne.o 8390p.o | 114 | obj-$(CONFIG_NE2000) += ne.o 8390p.o |
115 | obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o | 115 | obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o |
116 | obj-$(CONFIG_HPLAN) += hp.o 8390p.o | 116 | obj-$(CONFIG_HPLAN) += hp.o 8390p.o |
117 | obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o | 117 | obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o |
118 | obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o | 118 | obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o |
119 | obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o | 119 | obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o |
120 | obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o | 120 | obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o |
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index d07e3f148951..a1a3d0e5d2b4 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c | |||
@@ -3144,6 +3144,28 @@ bnx2_has_work(struct bnx2_napi *bnapi) | |||
3144 | return 0; | 3144 | return 0; |
3145 | } | 3145 | } |
3146 | 3146 | ||
3147 | static void | ||
3148 | bnx2_chk_missed_msi(struct bnx2 *bp) | ||
3149 | { | ||
3150 | struct bnx2_napi *bnapi = &bp->bnx2_napi[0]; | ||
3151 | u32 msi_ctrl; | ||
3152 | |||
3153 | if (bnx2_has_work(bnapi)) { | ||
3154 | msi_ctrl = REG_RD(bp, BNX2_PCICFG_MSI_CONTROL); | ||
3155 | if (!(msi_ctrl & BNX2_PCICFG_MSI_CONTROL_ENABLE)) | ||
3156 | return; | ||
3157 | |||
3158 | if (bnapi->last_status_idx == bp->idle_chk_status_idx) { | ||
3159 | REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl & | ||
3160 | ~BNX2_PCICFG_MSI_CONTROL_ENABLE); | ||
3161 | REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl); | ||
3162 | bnx2_msi(bp->irq_tbl[0].vector, bnapi); | ||
3163 | } | ||
3164 | } | ||
3165 | |||
3166 | bp->idle_chk_status_idx = bnapi->last_status_idx; | ||
3167 | } | ||
3168 | |||
3147 | static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi) | 3169 | static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi) |
3148 | { | 3170 | { |
3149 | struct status_block *sblk = bnapi->status_blk.msi; | 3171 | struct status_block *sblk = bnapi->status_blk.msi; |
@@ -3218,14 +3240,15 @@ static int bnx2_poll(struct napi_struct *napi, int budget) | |||
3218 | 3240 | ||
3219 | work_done = bnx2_poll_work(bp, bnapi, work_done, budget); | 3241 | work_done = bnx2_poll_work(bp, bnapi, work_done, budget); |
3220 | 3242 | ||
3221 | if (unlikely(work_done >= budget)) | ||
3222 | break; | ||
3223 | |||
3224 | /* bnapi->last_status_idx is used below to tell the hw how | 3243 | /* bnapi->last_status_idx is used below to tell the hw how |
3225 | * much work has been processed, so we must read it before | 3244 | * much work has been processed, so we must read it before |
3226 | * checking for more work. | 3245 | * checking for more work. |
3227 | */ | 3246 | */ |
3228 | bnapi->last_status_idx = sblk->status_idx; | 3247 | bnapi->last_status_idx = sblk->status_idx; |
3248 | |||
3249 | if (unlikely(work_done >= budget)) | ||
3250 | break; | ||
3251 | |||
3229 | rmb(); | 3252 | rmb(); |
3230 | if (likely(!bnx2_has_work(bnapi))) { | 3253 | if (likely(!bnx2_has_work(bnapi))) { |
3231 | netif_rx_complete(bp->dev, napi); | 3254 | netif_rx_complete(bp->dev, napi); |
@@ -4570,6 +4593,8 @@ bnx2_init_chip(struct bnx2 *bp) | |||
4570 | for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) | 4593 | for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) |
4571 | bp->bnx2_napi[i].last_status_idx = 0; | 4594 | bp->bnx2_napi[i].last_status_idx = 0; |
4572 | 4595 | ||
4596 | bp->idle_chk_status_idx = 0xffff; | ||
4597 | |||
4573 | bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE; | 4598 | bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE; |
4574 | 4599 | ||
4575 | /* Set up how to generate a link change interrupt. */ | 4600 | /* Set up how to generate a link change interrupt. */ |
@@ -5718,6 +5743,10 @@ bnx2_timer(unsigned long data) | |||
5718 | if (atomic_read(&bp->intr_sem) != 0) | 5743 | if (atomic_read(&bp->intr_sem) != 0) |
5719 | goto bnx2_restart_timer; | 5744 | goto bnx2_restart_timer; |
5720 | 5745 | ||
5746 | if ((bp->flags & (BNX2_FLAG_USING_MSI | BNX2_FLAG_ONE_SHOT_MSI)) == | ||
5747 | BNX2_FLAG_USING_MSI) | ||
5748 | bnx2_chk_missed_msi(bp); | ||
5749 | |||
5721 | bnx2_send_heart_beat(bp); | 5750 | bnx2_send_heart_beat(bp); |
5722 | 5751 | ||
5723 | bp->stats_blk->stat_FwRxDrop = | 5752 | bp->stats_blk->stat_FwRxDrop = |
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 617d95340160..0b032c3c7b61 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h | |||
@@ -378,6 +378,9 @@ struct l2_fhdr { | |||
378 | * pci_config_l definition | 378 | * pci_config_l definition |
379 | * offset: 0000 | 379 | * offset: 0000 |
380 | */ | 380 | */ |
381 | #define BNX2_PCICFG_MSI_CONTROL 0x00000058 | ||
382 | #define BNX2_PCICFG_MSI_CONTROL_ENABLE (1L<<16) | ||
383 | |||
381 | #define BNX2_PCICFG_MISC_CONFIG 0x00000068 | 384 | #define BNX2_PCICFG_MISC_CONFIG 0x00000068 |
382 | #define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2) | 385 | #define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2) |
383 | #define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3) | 386 | #define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3) |
@@ -6863,6 +6866,9 @@ struct bnx2 { | |||
6863 | 6866 | ||
6864 | u8 num_tx_rings; | 6867 | u8 num_tx_rings; |
6865 | u8 num_rx_rings; | 6868 | u8 num_rx_rings; |
6869 | |||
6870 | u32 idle_chk_status_idx; | ||
6871 | |||
6866 | }; | 6872 | }; |
6867 | 6873 | ||
6868 | #define REG_RD(bp, offset) \ | 6874 | #define REG_RD(bp, offset) \ |
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index d6c7d2aa761b..7092df50ff78 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c | |||
@@ -1035,10 +1035,6 @@ MODULE_PARM_DESC(copybreak, "Receive copy threshold"); | |||
1035 | * @pdev: the PCI device that received the packet | 1035 | * @pdev: the PCI device that received the packet |
1036 | * @fl: the SGE free list holding the packet | 1036 | * @fl: the SGE free list holding the packet |
1037 | * @len: the actual packet length, excluding any SGE padding | 1037 | * @len: the actual packet length, excluding any SGE padding |
1038 | * @dma_pad: padding at beginning of buffer left by SGE DMA | ||
1039 | * @skb_pad: padding to be used if the packet is copied | ||
1040 | * @copy_thres: length threshold under which a packet should be copied | ||
1041 | * @drop_thres: # of remaining buffers before we start dropping packets | ||
1042 | * | 1038 | * |
1043 | * Get the next packet from a free list and complete setup of the | 1039 | * Get the next packet from a free list and complete setup of the |
1044 | * sk_buff. If the packet is small we make a copy and recycle the | 1040 | * sk_buff. If the packet is small we make a copy and recycle the |
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 91795f78c3e4..122539a0e1fe 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c | |||
@@ -345,7 +345,6 @@ no_buffers: | |||
345 | /** | 345 | /** |
346 | * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers | 346 | * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers |
347 | * @adapter: address of board private structure | 347 | * @adapter: address of board private structure |
348 | * @rx_ring: pointer to receive ring structure | ||
349 | * @cleaned_count: number of buffers to allocate this pass | 348 | * @cleaned_count: number of buffers to allocate this pass |
350 | **/ | 349 | **/ |
351 | 350 | ||
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index e1b441effbbe..c414554ac321 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c | |||
@@ -568,6 +568,17 @@ static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end) | |||
568 | return erxrdpt; | 568 | return erxrdpt; |
569 | } | 569 | } |
570 | 570 | ||
571 | /* | ||
572 | * Calculate wrap around when reading beyond the end of the RX buffer | ||
573 | */ | ||
574 | static u16 rx_packet_start(u16 ptr) | ||
575 | { | ||
576 | if (ptr + RSV_SIZE > RXEND_INIT) | ||
577 | return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1); | ||
578 | else | ||
579 | return ptr + RSV_SIZE; | ||
580 | } | ||
581 | |||
571 | static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end) | 582 | static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end) |
572 | { | 583 | { |
573 | u16 erxrdpt; | 584 | u16 erxrdpt; |
@@ -938,8 +949,9 @@ static void enc28j60_hw_rx(struct net_device *ndev) | |||
938 | skb->dev = ndev; | 949 | skb->dev = ndev; |
939 | skb_reserve(skb, NET_IP_ALIGN); | 950 | skb_reserve(skb, NET_IP_ALIGN); |
940 | /* copy the packet from the receive buffer */ | 951 | /* copy the packet from the receive buffer */ |
941 | enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv), | 952 | enc28j60_mem_read(priv, |
942 | len, skb_put(skb, len)); | 953 | rx_packet_start(priv->next_pk_ptr), |
954 | len, skb_put(skb, len)); | ||
943 | if (netif_msg_pktdata(priv)) | 955 | if (netif_msg_pktdata(priv)) |
944 | dump_packet(__func__, skb->len, skb->data); | 956 | dump_packet(__func__, skb->len, skb->data); |
945 | skb->protocol = eth_type_trans(skb, ndev); | 957 | skb->protocol = eth_type_trans(skb, ndev); |
diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c index fbbd3e660c27..c01e290d09d2 100644 --- a/drivers/net/hp-plus.c +++ b/drivers/net/hp-plus.c | |||
@@ -230,7 +230,7 @@ static int __init hpp_probe1(struct net_device *dev, int ioaddr) | |||
230 | dev->open = &hpp_open; | 230 | dev->open = &hpp_open; |
231 | dev->stop = &hpp_close; | 231 | dev->stop = &hpp_close; |
232 | #ifdef CONFIG_NET_POLL_CONTROLLER | 232 | #ifdef CONFIG_NET_POLL_CONTROLLER |
233 | dev->poll_controller = ei_poll; | 233 | dev->poll_controller = eip_poll; |
234 | #endif | 234 | #endif |
235 | 235 | ||
236 | ei_status.name = name; | 236 | ei_status.name = name; |
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 1cbae85b1426..20d27e622ec1 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c | |||
@@ -1980,7 +1980,6 @@ static void igb_configure_rx(struct igb_adapter *adapter) | |||
1980 | 1980 | ||
1981 | /** | 1981 | /** |
1982 | * igb_free_tx_resources - Free Tx Resources per Queue | 1982 | * igb_free_tx_resources - Free Tx Resources per Queue |
1983 | * @adapter: board private structure | ||
1984 | * @tx_ring: Tx descriptor ring for a specific queue | 1983 | * @tx_ring: Tx descriptor ring for a specific queue |
1985 | * | 1984 | * |
1986 | * Free all transmit software resources | 1985 | * Free all transmit software resources |
@@ -2033,7 +2032,6 @@ static void igb_unmap_and_free_tx_resource(struct igb_adapter *adapter, | |||
2033 | 2032 | ||
2034 | /** | 2033 | /** |
2035 | * igb_clean_tx_ring - Free Tx Buffers | 2034 | * igb_clean_tx_ring - Free Tx Buffers |
2036 | * @adapter: board private structure | ||
2037 | * @tx_ring: ring to be cleaned | 2035 | * @tx_ring: ring to be cleaned |
2038 | **/ | 2036 | **/ |
2039 | static void igb_clean_tx_ring(struct igb_ring *tx_ring) | 2037 | static void igb_clean_tx_ring(struct igb_ring *tx_ring) |
@@ -2080,7 +2078,6 @@ static void igb_clean_all_tx_rings(struct igb_adapter *adapter) | |||
2080 | 2078 | ||
2081 | /** | 2079 | /** |
2082 | * igb_free_rx_resources - Free Rx Resources | 2080 | * igb_free_rx_resources - Free Rx Resources |
2083 | * @adapter: board private structure | ||
2084 | * @rx_ring: ring to clean the resources from | 2081 | * @rx_ring: ring to clean the resources from |
2085 | * | 2082 | * |
2086 | * Free all receive software resources | 2083 | * Free all receive software resources |
@@ -2120,7 +2117,6 @@ static void igb_free_all_rx_resources(struct igb_adapter *adapter) | |||
2120 | 2117 | ||
2121 | /** | 2118 | /** |
2122 | * igb_clean_rx_ring - Free Rx Buffers per Queue | 2119 | * igb_clean_rx_ring - Free Rx Buffers per Queue |
2123 | * @adapter: board private structure | ||
2124 | * @rx_ring: ring to free buffers from | 2120 | * @rx_ring: ring to free buffers from |
2125 | **/ | 2121 | **/ |
2126 | static void igb_clean_rx_ring(struct igb_ring *rx_ring) | 2122 | static void igb_clean_rx_ring(struct igb_ring *rx_ring) |
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 8ed823ae639e..5236f633ee36 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c | |||
@@ -1320,7 +1320,6 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) | |||
1320 | * ixgbe_intr - legacy mode Interrupt Handler | 1320 | * ixgbe_intr - legacy mode Interrupt Handler |
1321 | * @irq: interrupt number | 1321 | * @irq: interrupt number |
1322 | * @data: pointer to a network interface device structure | 1322 | * @data: pointer to a network interface device structure |
1323 | * @pt_regs: CPU registers structure | ||
1324 | **/ | 1323 | **/ |
1325 | static irqreturn_t ixgbe_intr(int irq, void *data) | 1324 | static irqreturn_t ixgbe_intr(int irq, void *data) |
1326 | { | 1325 | { |
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 42394505bb50..590039cbb146 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c | |||
@@ -70,6 +70,9 @@ static void macvlan_broadcast(struct sk_buff *skb, | |||
70 | struct sk_buff *nskb; | 70 | struct sk_buff *nskb; |
71 | unsigned int i; | 71 | unsigned int i; |
72 | 72 | ||
73 | if (skb->protocol == htons(ETH_P_PAUSE)) | ||
74 | return; | ||
75 | |||
73 | for (i = 0; i < MACVLAN_HASH_SIZE; i++) { | 76 | for (i = 0; i < MACVLAN_HASH_SIZE; i++) { |
74 | hlist_for_each_entry_rcu(vlan, n, &port->vlan_hash[i], hlist) { | 77 | hlist_for_each_entry_rcu(vlan, n, &port->vlan_hash[i], hlist) { |
75 | dev = vlan->dev; | 78 | dev = vlan->dev; |
diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c index b9bed82e1d21..b289a0a2b945 100644 --- a/drivers/net/netx-eth.c +++ b/drivers/net/netx-eth.c | |||
@@ -401,6 +401,8 @@ static int netx_eth_drv_probe(struct platform_device *pdev) | |||
401 | priv->xmac_base = priv->xc->xmac_base; | 401 | priv->xmac_base = priv->xc->xmac_base; |
402 | priv->sram_base = priv->xc->sram_base; | 402 | priv->sram_base = priv->xc->sram_base; |
403 | 403 | ||
404 | spin_lock_init(&priv->lock); | ||
405 | |||
404 | ret = pfifo_request(PFIFO_MASK(priv->id)); | 406 | ret = pfifo_request(PFIFO_MASK(priv->id)); |
405 | if (ret) { | 407 | if (ret) { |
406 | printk("unable to request PFIFO\n"); | 408 | printk("unable to request PFIFO\n"); |
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index b37a498939ae..0418045166c3 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c | |||
@@ -779,6 +779,7 @@ static struct pcmcia_device_id axnet_ids[] = { | |||
779 | PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2), | 779 | PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2), |
780 | PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8), | 780 | PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8), |
781 | PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609), | 781 | PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609), |
782 | PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875), | ||
782 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04), | 783 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04), |
783 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEtherCard", 0x281f1c5d, 0x7ef26116), | 784 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEtherCard", 0x281f1c5d, 0x7ef26116), |
784 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FEP501", 0x281f1c5d, 0x2e272058), | 785 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FEP501", 0x281f1c5d, 0x2e272058), |
@@ -1174,7 +1175,6 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) | |||
1174 | * ax_interrupt - handle the interrupts from an 8390 | 1175 | * ax_interrupt - handle the interrupts from an 8390 |
1175 | * @irq: interrupt number | 1176 | * @irq: interrupt number |
1176 | * @dev_id: a pointer to the net_device | 1177 | * @dev_id: a pointer to the net_device |
1177 | * @regs: unused | ||
1178 | * | 1178 | * |
1179 | * Handle the ether interface interrupts. We pull packets from | 1179 | * Handle the ether interface interrupts. We pull packets from |
1180 | * the 8390 via the card specific functions and fire them at the networking | 1180 | * the 8390 via the card specific functions and fire them at the networking |
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index e40d6301aa7a..ce486f094492 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c | |||
@@ -1693,7 +1693,6 @@ static struct pcmcia_device_id pcnet_ids[] = { | |||
1693 | PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8), | 1693 | PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8), |
1694 | PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76), | 1694 | PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76), |
1695 | PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e), | 1695 | PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e), |
1696 | PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875), | ||
1697 | PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f), | 1696 | PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f), |
1698 | PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1), | 1697 | PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1), |
1699 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b), | 1698 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b), |
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 55bc24b234e3..25acbbde4a60 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c | |||
@@ -227,8 +227,17 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) | |||
227 | if (r) | 227 | if (r) |
228 | return ERR_PTR(r); | 228 | return ERR_PTR(r); |
229 | 229 | ||
230 | /* If the phy_id is all Fs or all 0s, there is no device there */ | 230 | /* If the phy_id is mostly Fs, there is no device there */ |
231 | if ((0xffff == phy_id) || (0x00 == phy_id)) | 231 | if ((phy_id & 0x1fffffff) == 0x1fffffff) |
232 | return NULL; | ||
233 | |||
234 | /* | ||
235 | * Broken hardware is sometimes missing the pull down resistor on the | ||
236 | * MDIO line, which results in reads to non-existent devices returning | ||
237 | * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent | ||
238 | * device as well. | ||
239 | */ | ||
240 | if (phy_id == 0) | ||
232 | return NULL; | 241 | return NULL; |
233 | 242 | ||
234 | dev = phy_device_create(bus, addr, phy_id); | 243 | dev = phy_device_create(bus, addr, phy_id); |
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 8874497b6bbf..dd3b2447e85a 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c | |||
@@ -34,6 +34,8 @@ | |||
34 | #define MII_VSC8244_IMASK_DUPLEX 0x1000 | 34 | #define MII_VSC8244_IMASK_DUPLEX 0x1000 |
35 | #define MII_VSC8244_IMASK_MASK 0xf000 | 35 | #define MII_VSC8244_IMASK_MASK 0xf000 |
36 | 36 | ||
37 | #define MII_VSC8221_IMASK_MASK 0xa000 | ||
38 | |||
37 | /* Vitesse Interrupt Status Register */ | 39 | /* Vitesse Interrupt Status Register */ |
38 | #define MII_VSC8244_ISTAT 0x1a | 40 | #define MII_VSC8244_ISTAT 0x1a |
39 | #define MII_VSC8244_ISTAT_STATUS 0x8000 | 41 | #define MII_VSC8244_ISTAT_STATUS 0x8000 |
@@ -49,6 +51,12 @@ | |||
49 | #define MII_VSC8244_AUXCONSTAT_GBIT 0x0010 | 51 | #define MII_VSC8244_AUXCONSTAT_GBIT 0x0010 |
50 | #define MII_VSC8244_AUXCONSTAT_100 0x0008 | 52 | #define MII_VSC8244_AUXCONSTAT_100 0x0008 |
51 | 53 | ||
54 | #define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */ | ||
55 | #define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004 | ||
56 | |||
57 | #define PHY_ID_VSC8244 0x000fc6c0 | ||
58 | #define PHY_ID_VSC8221 0x000fc550 | ||
59 | |||
52 | MODULE_DESCRIPTION("Vitesse PHY driver"); | 60 | MODULE_DESCRIPTION("Vitesse PHY driver"); |
53 | MODULE_AUTHOR("Kriston Carson"); | 61 | MODULE_AUTHOR("Kriston Carson"); |
54 | MODULE_LICENSE("GPL"); | 62 | MODULE_LICENSE("GPL"); |
@@ -95,13 +103,15 @@ static int vsc824x_ack_interrupt(struct phy_device *phydev) | |||
95 | return (err < 0) ? err : 0; | 103 | return (err < 0) ? err : 0; |
96 | } | 104 | } |
97 | 105 | ||
98 | static int vsc824x_config_intr(struct phy_device *phydev) | 106 | static int vsc82xx_config_intr(struct phy_device *phydev) |
99 | { | 107 | { |
100 | int err; | 108 | int err; |
101 | 109 | ||
102 | if (phydev->interrupts == PHY_INTERRUPT_ENABLED) | 110 | if (phydev->interrupts == PHY_INTERRUPT_ENABLED) |
103 | err = phy_write(phydev, MII_VSC8244_IMASK, | 111 | err = phy_write(phydev, MII_VSC8244_IMASK, |
104 | MII_VSC8244_IMASK_MASK); | 112 | phydev->drv->phy_id == PHY_ID_VSC8244 ? |
113 | MII_VSC8244_IMASK_MASK : | ||
114 | MII_VSC8221_IMASK_MASK); | ||
105 | else { | 115 | else { |
106 | /* | 116 | /* |
107 | * The Vitesse PHY cannot clear the interrupt | 117 | * The Vitesse PHY cannot clear the interrupt |
@@ -120,7 +130,7 @@ static int vsc824x_config_intr(struct phy_device *phydev) | |||
120 | 130 | ||
121 | /* Vitesse 824x */ | 131 | /* Vitesse 824x */ |
122 | static struct phy_driver vsc8244_driver = { | 132 | static struct phy_driver vsc8244_driver = { |
123 | .phy_id = 0x000fc6c0, | 133 | .phy_id = PHY_ID_VSC8244, |
124 | .name = "Vitesse VSC8244", | 134 | .name = "Vitesse VSC8244", |
125 | .phy_id_mask = 0x000fffc0, | 135 | .phy_id_mask = 0x000fffc0, |
126 | .features = PHY_GBIT_FEATURES, | 136 | .features = PHY_GBIT_FEATURES, |
@@ -129,19 +139,55 @@ static struct phy_driver vsc8244_driver = { | |||
129 | .config_aneg = &genphy_config_aneg, | 139 | .config_aneg = &genphy_config_aneg, |
130 | .read_status = &genphy_read_status, | 140 | .read_status = &genphy_read_status, |
131 | .ack_interrupt = &vsc824x_ack_interrupt, | 141 | .ack_interrupt = &vsc824x_ack_interrupt, |
132 | .config_intr = &vsc824x_config_intr, | 142 | .config_intr = &vsc82xx_config_intr, |
133 | .driver = { .owner = THIS_MODULE,}, | 143 | .driver = { .owner = THIS_MODULE,}, |
134 | }; | 144 | }; |
135 | 145 | ||
136 | static int __init vsc8244_init(void) | 146 | static int vsc8221_config_init(struct phy_device *phydev) |
137 | { | 147 | { |
138 | return phy_driver_register(&vsc8244_driver); | 148 | int err; |
149 | |||
150 | err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT, | ||
151 | MII_VSC8221_AUXCONSTAT_INIT); | ||
152 | return err; | ||
153 | |||
154 | /* Perhaps we should set EXT_CON1 based on the interface? | ||
155 | Options are 802.3Z SerDes or SGMII */ | ||
156 | } | ||
157 | |||
158 | /* Vitesse 8221 */ | ||
159 | static struct phy_driver vsc8221_driver = { | ||
160 | .phy_id = PHY_ID_VSC8221, | ||
161 | .phy_id_mask = 0x000ffff0, | ||
162 | .name = "Vitesse VSC8221", | ||
163 | .features = PHY_GBIT_FEATURES, | ||
164 | .flags = PHY_HAS_INTERRUPT, | ||
165 | .config_init = &vsc8221_config_init, | ||
166 | .config_aneg = &genphy_config_aneg, | ||
167 | .read_status = &genphy_read_status, | ||
168 | .ack_interrupt = &vsc824x_ack_interrupt, | ||
169 | .config_intr = &vsc82xx_config_intr, | ||
170 | .driver = { .owner = THIS_MODULE,}, | ||
171 | }; | ||
172 | |||
173 | static int __init vsc82xx_init(void) | ||
174 | { | ||
175 | int err; | ||
176 | |||
177 | err = phy_driver_register(&vsc8244_driver); | ||
178 | if (err < 0) | ||
179 | return err; | ||
180 | err = phy_driver_register(&vsc8221_driver); | ||
181 | if (err < 0) | ||
182 | phy_driver_unregister(&vsc8244_driver); | ||
183 | return err; | ||
139 | } | 184 | } |
140 | 185 | ||
141 | static void __exit vsc8244_exit(void) | 186 | static void __exit vsc82xx_exit(void) |
142 | { | 187 | { |
143 | phy_driver_unregister(&vsc8244_driver); | 188 | phy_driver_unregister(&vsc8244_driver); |
189 | phy_driver_unregister(&vsc8221_driver); | ||
144 | } | 190 | } |
145 | 191 | ||
146 | module_init(vsc8244_init); | 192 | module_init(vsc82xx_init); |
147 | module_exit(vsc8244_exit); | 193 | module_exit(vsc82xx_exit); |
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 185b1dff10a8..e98d9773158d 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c | |||
@@ -1353,6 +1353,7 @@ static int pppol2tp_release(struct socket *sock) | |||
1353 | kfree_skb(skb); | 1353 | kfree_skb(skb); |
1354 | sock_put(sk); | 1354 | sock_put(sk); |
1355 | } | 1355 | } |
1356 | sock_put(sk); | ||
1356 | } | 1357 | } |
1357 | 1358 | ||
1358 | release_sock(sk); | 1359 | release_sock(sk); |
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index fa3a460f8e2f..8e8337e8b072 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c | |||
@@ -1630,7 +1630,6 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev) | |||
1630 | * sis900_interrupt - sis900 interrupt handler | 1630 | * sis900_interrupt - sis900 interrupt handler |
1631 | * @irq: the irq number | 1631 | * @irq: the irq number |
1632 | * @dev_instance: the client data object | 1632 | * @dev_instance: the client data object |
1633 | * @regs: snapshot of processor context | ||
1634 | * | 1633 | * |
1635 | * The interrupt handler does all of the Rx thread work, | 1634 | * The interrupt handler does all of the Rx thread work, |
1636 | * and cleans up after the Tx thread | 1635 | * and cleans up after the Tx thread |
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index b6435d0d71f9..07599b492359 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c | |||
@@ -672,7 +672,6 @@ write_hash: | |||
672 | /** | 672 | /** |
673 | * spider_net_prepare_tx_descr - fill tx descriptor with skb data | 673 | * spider_net_prepare_tx_descr - fill tx descriptor with skb data |
674 | * @card: card structure | 674 | * @card: card structure |
675 | * @descr: descriptor structure to fill out | ||
676 | * @skb: packet to use | 675 | * @skb: packet to use |
677 | * | 676 | * |
678 | * returns 0 on success, <0 on failure. | 677 | * returns 0 on success, <0 on failure. |
@@ -867,7 +866,6 @@ spider_net_release_tx_chain(struct spider_net_card *card, int brutal) | |||
867 | /** | 866 | /** |
868 | * spider_net_kick_tx_dma - enables TX DMA processing | 867 | * spider_net_kick_tx_dma - enables TX DMA processing |
869 | * @card: card structure | 868 | * @card: card structure |
870 | * @descr: descriptor address to enable TX processing at | ||
871 | * | 869 | * |
872 | * This routine will start the transmit DMA running if | 870 | * This routine will start the transmit DMA running if |
873 | * it is not already running. This routine ned only be | 871 | * it is not already running. This routine ned only be |
@@ -1637,7 +1635,6 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg, | |||
1637 | * spider_net_interrupt - interrupt handler for spider_net | 1635 | * spider_net_interrupt - interrupt handler for spider_net |
1638 | * @irq: interrupt number | 1636 | * @irq: interrupt number |
1639 | * @ptr: pointer to net_device | 1637 | * @ptr: pointer to net_device |
1640 | * @regs: PU registers | ||
1641 | * | 1638 | * |
1642 | * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no | 1639 | * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no |
1643 | * interrupt found raised by card. | 1640 | * interrupt found raised by card. |
@@ -2419,7 +2416,6 @@ spider_net_undo_pci_setup(struct spider_net_card *card) | |||
2419 | 2416 | ||
2420 | /** | 2417 | /** |
2421 | * spider_net_setup_pci_dev - sets up the device in terms of PCI operations | 2418 | * spider_net_setup_pci_dev - sets up the device in terms of PCI operations |
2422 | * @card: card structure | ||
2423 | * @pdev: PCI device | 2419 | * @pdev: PCI device |
2424 | * | 2420 | * |
2425 | * Returns the card structure or NULL if any errors occur | 2421 | * Returns the card structure or NULL if any errors occur |
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 4291458955ef..1349e419673c 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c | |||
@@ -1714,7 +1714,7 @@ static void gem_init_phy(struct gem *gp) | |||
1714 | /* Reset PCS unit. */ | 1714 | /* Reset PCS unit. */ |
1715 | val = readl(gp->regs + PCS_MIICTRL); | 1715 | val = readl(gp->regs + PCS_MIICTRL); |
1716 | val |= PCS_MIICTRL_RST; | 1716 | val |= PCS_MIICTRL_RST; |
1717 | writeb(val, gp->regs + PCS_MIICTRL); | 1717 | writel(val, gp->regs + PCS_MIICTRL); |
1718 | 1718 | ||
1719 | limit = 32; | 1719 | limit = 32; |
1720 | while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) { | 1720 | while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) { |
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index cfd4d052d666..2d14255eb103 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c | |||
@@ -240,6 +240,10 @@ static u64 ath5k_get_tsf(struct ieee80211_hw *hw); | |||
240 | static void ath5k_reset_tsf(struct ieee80211_hw *hw); | 240 | static void ath5k_reset_tsf(struct ieee80211_hw *hw); |
241 | static int ath5k_beacon_update(struct ieee80211_hw *hw, | 241 | static int ath5k_beacon_update(struct ieee80211_hw *hw, |
242 | struct sk_buff *skb); | 242 | struct sk_buff *skb); |
243 | static void ath5k_bss_info_changed(struct ieee80211_hw *hw, | ||
244 | struct ieee80211_vif *vif, | ||
245 | struct ieee80211_bss_conf *bss_conf, | ||
246 | u32 changes); | ||
243 | 247 | ||
244 | static struct ieee80211_ops ath5k_hw_ops = { | 248 | static struct ieee80211_ops ath5k_hw_ops = { |
245 | .tx = ath5k_tx, | 249 | .tx = ath5k_tx, |
@@ -256,6 +260,7 @@ static struct ieee80211_ops ath5k_hw_ops = { | |||
256 | .get_tx_stats = ath5k_get_tx_stats, | 260 | .get_tx_stats = ath5k_get_tx_stats, |
257 | .get_tsf = ath5k_get_tsf, | 261 | .get_tsf = ath5k_get_tsf, |
258 | .reset_tsf = ath5k_reset_tsf, | 262 | .reset_tsf = ath5k_reset_tsf, |
263 | .bss_info_changed = ath5k_bss_info_changed, | ||
259 | }; | 264 | }; |
260 | 265 | ||
261 | /* | 266 | /* |
@@ -2942,7 +2947,7 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, | |||
2942 | sc->opmode != NL80211_IFTYPE_MESH_POINT && | 2947 | sc->opmode != NL80211_IFTYPE_MESH_POINT && |
2943 | test_bit(ATH_STAT_PROMISC, sc->status)) | 2948 | test_bit(ATH_STAT_PROMISC, sc->status)) |
2944 | rfilt |= AR5K_RX_FILTER_PROM; | 2949 | rfilt |= AR5K_RX_FILTER_PROM; |
2945 | if (sc->opmode == NL80211_IFTYPE_STATION || | 2950 | if ((sc->opmode == NL80211_IFTYPE_STATION && sc->assoc) || |
2946 | sc->opmode == NL80211_IFTYPE_ADHOC) { | 2951 | sc->opmode == NL80211_IFTYPE_ADHOC) { |
2947 | rfilt |= AR5K_RX_FILTER_BEACON; | 2952 | rfilt |= AR5K_RX_FILTER_BEACON; |
2948 | } | 2953 | } |
@@ -3083,4 +3088,32 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) | |||
3083 | end: | 3088 | end: |
3084 | return ret; | 3089 | return ret; |
3085 | } | 3090 | } |
3091 | static void | ||
3092 | set_beacon_filter(struct ieee80211_hw *hw, bool enable) | ||
3093 | { | ||
3094 | struct ath5k_softc *sc = hw->priv; | ||
3095 | struct ath5k_hw *ah = sc->ah; | ||
3096 | u32 rfilt; | ||
3097 | rfilt = ath5k_hw_get_rx_filter(ah); | ||
3098 | if (enable) | ||
3099 | rfilt |= AR5K_RX_FILTER_BEACON; | ||
3100 | else | ||
3101 | rfilt &= ~AR5K_RX_FILTER_BEACON; | ||
3102 | ath5k_hw_set_rx_filter(ah, rfilt); | ||
3103 | sc->filter_flags = rfilt; | ||
3104 | } | ||
3086 | 3105 | ||
3106 | static void ath5k_bss_info_changed(struct ieee80211_hw *hw, | ||
3107 | struct ieee80211_vif *vif, | ||
3108 | struct ieee80211_bss_conf *bss_conf, | ||
3109 | u32 changes) | ||
3110 | { | ||
3111 | struct ath5k_softc *sc = hw->priv; | ||
3112 | if (changes & BSS_CHANGED_ASSOC) { | ||
3113 | mutex_lock(&sc->lock); | ||
3114 | sc->assoc = bss_conf->assoc; | ||
3115 | if (sc->opmode == NL80211_IFTYPE_STATION) | ||
3116 | set_beacon_filter(hw, sc->assoc); | ||
3117 | mutex_unlock(&sc->lock); | ||
3118 | } | ||
3119 | } | ||
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index 06d1054ca94b..facc60ddada2 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h | |||
@@ -179,6 +179,7 @@ struct ath5k_softc { | |||
179 | 179 | ||
180 | struct timer_list calib_tim; /* calibration timer */ | 180 | struct timer_list calib_tim; /* calibration timer */ |
181 | int power_level; /* Requested tx power in dbm */ | 181 | int power_level; /* Requested tx power in dbm */ |
182 | bool assoc; /* assocate state */ | ||
182 | }; | 183 | }; |
183 | 184 | ||
184 | #define ath5k_hw_hasbssidmask(_ah) \ | 185 | #define ath5k_hw_hasbssidmask(_ah) \ |
diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 19980cbd5d5f..ccaeb5c219d2 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c | |||
@@ -417,19 +417,19 @@ ath5k_debug_init_device(struct ath5k_softc *sc) | |||
417 | sc->debug.debugfs_phydir = debugfs_create_dir(wiphy_name(sc->hw->wiphy), | 417 | sc->debug.debugfs_phydir = debugfs_create_dir(wiphy_name(sc->hw->wiphy), |
418 | ath5k_global_debugfs); | 418 | ath5k_global_debugfs); |
419 | 419 | ||
420 | sc->debug.debugfs_debug = debugfs_create_file("debug", 0666, | 420 | sc->debug.debugfs_debug = debugfs_create_file("debug", S_IWUSR | S_IRUGO, |
421 | sc->debug.debugfs_phydir, sc, &fops_debug); | 421 | sc->debug.debugfs_phydir, sc, &fops_debug); |
422 | 422 | ||
423 | sc->debug.debugfs_registers = debugfs_create_file("registers", 0444, | 423 | sc->debug.debugfs_registers = debugfs_create_file("registers", S_IRUGO, |
424 | sc->debug.debugfs_phydir, sc, &fops_registers); | 424 | sc->debug.debugfs_phydir, sc, &fops_registers); |
425 | 425 | ||
426 | sc->debug.debugfs_tsf = debugfs_create_file("tsf", 0666, | 426 | sc->debug.debugfs_tsf = debugfs_create_file("tsf", S_IWUSR | S_IRUGO, |
427 | sc->debug.debugfs_phydir, sc, &fops_tsf); | 427 | sc->debug.debugfs_phydir, sc, &fops_tsf); |
428 | 428 | ||
429 | sc->debug.debugfs_beacon = debugfs_create_file("beacon", 0666, | 429 | sc->debug.debugfs_beacon = debugfs_create_file("beacon", S_IWUSR | S_IRUGO, |
430 | sc->debug.debugfs_phydir, sc, &fops_beacon); | 430 | sc->debug.debugfs_phydir, sc, &fops_beacon); |
431 | 431 | ||
432 | sc->debug.debugfs_reset = debugfs_create_file("reset", 0222, | 432 | sc->debug.debugfs_reset = debugfs_create_file("reset", S_IWUSR, |
433 | sc->debug.debugfs_phydir, sc, &fops_reset); | 433 | sc->debug.debugfs_phydir, sc, &fops_reset); |
434 | } | 434 | } |
435 | 435 | ||
diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index 9e15c30bbc06..4dd1c1bda0fb 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c | |||
@@ -170,7 +170,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) | |||
170 | skb = (struct sk_buff *)bf->bf_mpdu; | 170 | skb = (struct sk_buff *)bf->bf_mpdu; |
171 | if (skb) { | 171 | if (skb) { |
172 | pci_unmap_single(sc->pdev, bf->bf_dmacontext, | 172 | pci_unmap_single(sc->pdev, bf->bf_dmacontext, |
173 | skb_end_pointer(skb) - skb->head, | 173 | skb->len, |
174 | PCI_DMA_TODEVICE); | 174 | PCI_DMA_TODEVICE); |
175 | } | 175 | } |
176 | 176 | ||
@@ -193,7 +193,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) | |||
193 | 193 | ||
194 | bf->bf_buf_addr = bf->bf_dmacontext = | 194 | bf->bf_buf_addr = bf->bf_dmacontext = |
195 | pci_map_single(sc->pdev, skb->data, | 195 | pci_map_single(sc->pdev, skb->data, |
196 | skb_end_pointer(skb) - skb->head, | 196 | skb->len, |
197 | PCI_DMA_TODEVICE); | 197 | PCI_DMA_TODEVICE); |
198 | 198 | ||
199 | skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data); | 199 | skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data); |
@@ -352,7 +352,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) | |||
352 | if (bf->bf_mpdu != NULL) { | 352 | if (bf->bf_mpdu != NULL) { |
353 | skb = (struct sk_buff *)bf->bf_mpdu; | 353 | skb = (struct sk_buff *)bf->bf_mpdu; |
354 | pci_unmap_single(sc->pdev, bf->bf_dmacontext, | 354 | pci_unmap_single(sc->pdev, bf->bf_dmacontext, |
355 | skb_end_pointer(skb) - skb->head, | 355 | skb->len, |
356 | PCI_DMA_TODEVICE); | 356 | PCI_DMA_TODEVICE); |
357 | dev_kfree_skb_any(skb); | 357 | dev_kfree_skb_any(skb); |
358 | bf->bf_mpdu = NULL; | 358 | bf->bf_mpdu = NULL; |
@@ -412,7 +412,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) | |||
412 | 412 | ||
413 | bf->bf_buf_addr = bf->bf_dmacontext = | 413 | bf->bf_buf_addr = bf->bf_dmacontext = |
414 | pci_map_single(sc->pdev, skb->data, | 414 | pci_map_single(sc->pdev, skb->data, |
415 | skb_end_pointer(skb) - skb->head, | 415 | skb->len, |
416 | PCI_DMA_TODEVICE); | 416 | PCI_DMA_TODEVICE); |
417 | bf->bf_mpdu = skb; | 417 | bf->bf_mpdu = skb; |
418 | 418 | ||
@@ -439,7 +439,7 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) | |||
439 | if (bf->bf_mpdu != NULL) { | 439 | if (bf->bf_mpdu != NULL) { |
440 | struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; | 440 | struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; |
441 | pci_unmap_single(sc->pdev, bf->bf_dmacontext, | 441 | pci_unmap_single(sc->pdev, bf->bf_dmacontext, |
442 | skb_end_pointer(skb) - skb->head, | 442 | skb->len, |
443 | PCI_DMA_TODEVICE); | 443 | PCI_DMA_TODEVICE); |
444 | dev_kfree_skb_any(skb); | 444 | dev_kfree_skb_any(skb); |
445 | bf->bf_mpdu = NULL; | 445 | bf->bf_mpdu = NULL; |
diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 4983402af559..504a0444d89f 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c | |||
@@ -49,10 +49,12 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) | |||
49 | ASSERT(skb != NULL); | 49 | ASSERT(skb != NULL); |
50 | ds->ds_vdata = skb->data; | 50 | ds->ds_vdata = skb->data; |
51 | 51 | ||
52 | /* setup rx descriptors */ | 52 | /* setup rx descriptors. The sc_rxbufsize here tells the harware |
53 | * how much data it can DMA to us and that we are prepared | ||
54 | * to process */ | ||
53 | ath9k_hw_setuprxdesc(ah, | 55 | ath9k_hw_setuprxdesc(ah, |
54 | ds, | 56 | ds, |
55 | skb_tailroom(skb), /* buffer size */ | 57 | sc->sc_rxbufsize, |
56 | 0); | 58 | 0); |
57 | 59 | ||
58 | if (sc->sc_rxlink == NULL) | 60 | if (sc->sc_rxlink == NULL) |
@@ -398,6 +400,13 @@ static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, | |||
398 | * in rx'd frames. | 400 | * in rx'd frames. |
399 | */ | 401 | */ |
400 | 402 | ||
403 | /* Note: the kernel can allocate a value greater than | ||
404 | * what we ask it to give us. We really only need 4 KB as that | ||
405 | * is this hardware supports and in fact we need at least 3849 | ||
406 | * as that is the MAX AMSDU size this hardware supports. | ||
407 | * Unfortunately this means we may get 8 KB here from the | ||
408 | * kernel... and that is actually what is observed on some | ||
409 | * systems :( */ | ||
401 | skb = dev_alloc_skb(len + sc->sc_cachelsz - 1); | 410 | skb = dev_alloc_skb(len + sc->sc_cachelsz - 1); |
402 | if (skb != NULL) { | 411 | if (skb != NULL) { |
403 | off = ((unsigned long) skb->data) % sc->sc_cachelsz; | 412 | off = ((unsigned long) skb->data) % sc->sc_cachelsz; |
@@ -456,7 +465,7 @@ static int ath_rx_indicate(struct ath_softc *sc, | |||
456 | if (nskb != NULL) { | 465 | if (nskb != NULL) { |
457 | bf->bf_mpdu = nskb; | 466 | bf->bf_mpdu = nskb; |
458 | bf->bf_buf_addr = pci_map_single(sc->pdev, nskb->data, | 467 | bf->bf_buf_addr = pci_map_single(sc->pdev, nskb->data, |
459 | skb_end_pointer(nskb) - nskb->head, | 468 | sc->sc_rxbufsize, |
460 | PCI_DMA_FROMDEVICE); | 469 | PCI_DMA_FROMDEVICE); |
461 | bf->bf_dmacontext = bf->bf_buf_addr; | 470 | bf->bf_dmacontext = bf->bf_buf_addr; |
462 | ATH_RX_CONTEXT(nskb)->ctx_rxbuf = bf; | 471 | ATH_RX_CONTEXT(nskb)->ctx_rxbuf = bf; |
@@ -542,7 +551,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) | |||
542 | 551 | ||
543 | bf->bf_mpdu = skb; | 552 | bf->bf_mpdu = skb; |
544 | bf->bf_buf_addr = pci_map_single(sc->pdev, skb->data, | 553 | bf->bf_buf_addr = pci_map_single(sc->pdev, skb->data, |
545 | skb_end_pointer(skb) - skb->head, | 554 | sc->sc_rxbufsize, |
546 | PCI_DMA_FROMDEVICE); | 555 | PCI_DMA_FROMDEVICE); |
547 | bf->bf_dmacontext = bf->bf_buf_addr; | 556 | bf->bf_dmacontext = bf->bf_buf_addr; |
548 | ATH_RX_CONTEXT(skb)->ctx_rxbuf = bf; | 557 | ATH_RX_CONTEXT(skb)->ctx_rxbuf = bf; |
@@ -1007,7 +1016,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) | |||
1007 | 1016 | ||
1008 | pci_dma_sync_single_for_cpu(sc->pdev, | 1017 | pci_dma_sync_single_for_cpu(sc->pdev, |
1009 | bf->bf_buf_addr, | 1018 | bf->bf_buf_addr, |
1010 | skb_tailroom(skb), | 1019 | sc->sc_rxbufsize, |
1011 | PCI_DMA_FROMDEVICE); | 1020 | PCI_DMA_FROMDEVICE); |
1012 | pci_unmap_single(sc->pdev, | 1021 | pci_unmap_single(sc->pdev, |
1013 | bf->bf_buf_addr, | 1022 | bf->bf_buf_addr, |
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index dcce3542d5a7..7a9f901d4ff6 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c | |||
@@ -3897,6 +3897,7 @@ static int ipw_disassociate(void *data) | |||
3897 | if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING))) | 3897 | if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING))) |
3898 | return 0; | 3898 | return 0; |
3899 | ipw_send_disassociate(data, 0); | 3899 | ipw_send_disassociate(data, 0); |
3900 | netif_carrier_off(priv->net_dev); | ||
3900 | return 1; | 3901 | return 1; |
3901 | } | 3902 | } |
3902 | 3903 | ||
@@ -10190,6 +10191,9 @@ static int ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb, | |||
10190 | u16 remaining_bytes; | 10191 | u16 remaining_bytes; |
10191 | int fc; | 10192 | int fc; |
10192 | 10193 | ||
10194 | if (!(priv->status & STATUS_ASSOCIATED)) | ||
10195 | goto drop; | ||
10196 | |||
10193 | hdr_len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); | 10197 | hdr_len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); |
10194 | switch (priv->ieee->iw_mode) { | 10198 | switch (priv->ieee->iw_mode) { |
10195 | case IW_MODE_ADHOC: | 10199 | case IW_MODE_ADHOC: |
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 444c5cc05f03..c4c0371c763b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c | |||
@@ -1384,9 +1384,11 @@ void iwl_rx_handle(struct iwl_priv *priv) | |||
1384 | 1384 | ||
1385 | rxq->queue[i] = NULL; | 1385 | rxq->queue[i] = NULL; |
1386 | 1386 | ||
1387 | pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->aligned_dma_addr, | 1387 | dma_sync_single_range_for_cpu( |
1388 | priv->hw_params.rx_buf_size, | 1388 | &priv->pci_dev->dev, rxb->real_dma_addr, |
1389 | PCI_DMA_FROMDEVICE); | 1389 | rxb->aligned_dma_addr - rxb->real_dma_addr, |
1390 | priv->hw_params.rx_buf_size, | ||
1391 | PCI_DMA_FROMDEVICE); | ||
1390 | pkt = (struct iwl_rx_packet *)rxb->skb->data; | 1392 | pkt = (struct iwl_rx_packet *)rxb->skb->data; |
1391 | 1393 | ||
1392 | /* Reclaim a command buffer only if this packet is a response | 1394 | /* Reclaim a command buffer only if this packet is a response |
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 4c312c55f90c..01a845851338 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c | |||
@@ -290,6 +290,9 @@ void iwl_clear_stations_table(struct iwl_priv *priv) | |||
290 | priv->num_stations = 0; | 290 | priv->num_stations = 0; |
291 | memset(priv->stations, 0, sizeof(priv->stations)); | 291 | memset(priv->stations, 0, sizeof(priv->stations)); |
292 | 292 | ||
293 | /* clean ucode key table bit map */ | ||
294 | priv->ucode_key_table = 0; | ||
295 | |||
293 | spin_unlock_irqrestore(&priv->sta_lock, flags); | 296 | spin_unlock_irqrestore(&priv->sta_lock, flags); |
294 | } | 297 | } |
295 | EXPORT_SYMBOL(iwl_clear_stations_table); | 298 | EXPORT_SYMBOL(iwl_clear_stations_table); |
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 61797f3f8d5c..26f7084d3011 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c | |||
@@ -475,7 +475,7 @@ static int iwl_get_free_ucode_key_index(struct iwl_priv *priv) | |||
475 | if (!test_and_set_bit(i, &priv->ucode_key_table)) | 475 | if (!test_and_set_bit(i, &priv->ucode_key_table)) |
476 | return i; | 476 | return i; |
477 | 477 | ||
478 | return -1; | 478 | return WEP_INVALID_OFFSET; |
479 | } | 479 | } |
480 | 480 | ||
481 | int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty) | 481 | int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty) |
@@ -620,6 +620,9 @@ static int iwl_set_wep_dynamic_key_info(struct iwl_priv *priv, | |||
620 | /* else, we are overriding an existing key => no need to allocated room | 620 | /* else, we are overriding an existing key => no need to allocated room |
621 | * in uCode. */ | 621 | * in uCode. */ |
622 | 622 | ||
623 | WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, | ||
624 | "no space for new kew"); | ||
625 | |||
623 | priv->stations[sta_id].sta.key.key_flags = key_flags; | 626 | priv->stations[sta_id].sta.key.key_flags = key_flags; |
624 | priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; | 627 | priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; |
625 | priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; | 628 | priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
@@ -637,6 +640,7 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv, | |||
637 | { | 640 | { |
638 | unsigned long flags; | 641 | unsigned long flags; |
639 | __le16 key_flags = 0; | 642 | __le16 key_flags = 0; |
643 | int ret; | ||
640 | 644 | ||
641 | key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); | 645 | key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); |
642 | key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); | 646 | key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); |
@@ -664,14 +668,18 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv, | |||
664 | /* else, we are overriding an existing key => no need to allocated room | 668 | /* else, we are overriding an existing key => no need to allocated room |
665 | * in uCode. */ | 669 | * in uCode. */ |
666 | 670 | ||
671 | WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, | ||
672 | "no space for new kew"); | ||
673 | |||
667 | priv->stations[sta_id].sta.key.key_flags = key_flags; | 674 | priv->stations[sta_id].sta.key.key_flags = key_flags; |
668 | priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; | 675 | priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; |
669 | priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; | 676 | priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
670 | 677 | ||
678 | ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); | ||
679 | |||
671 | spin_unlock_irqrestore(&priv->sta_lock, flags); | 680 | spin_unlock_irqrestore(&priv->sta_lock, flags); |
672 | 681 | ||
673 | IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n"); | 682 | return ret; |
674 | return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); | ||
675 | } | 683 | } |
676 | 684 | ||
677 | static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, | 685 | static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, |
@@ -696,6 +704,9 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, | |||
696 | /* else, we are overriding an existing key => no need to allocated room | 704 | /* else, we are overriding an existing key => no need to allocated room |
697 | * in uCode. */ | 705 | * in uCode. */ |
698 | 706 | ||
707 | WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, | ||
708 | "no space for new kew"); | ||
709 | |||
699 | /* This copy is acutally not needed: we get the key with each TX */ | 710 | /* This copy is acutally not needed: we get the key with each TX */ |
700 | memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16); | 711 | memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16); |
701 | 712 | ||
@@ -734,6 +745,13 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, | |||
734 | return 0; | 745 | return 0; |
735 | } | 746 | } |
736 | 747 | ||
748 | if (priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET) { | ||
749 | IWL_WARNING("Removing wrong key %d 0x%x\n", | ||
750 | keyconf->keyidx, key_flags); | ||
751 | spin_unlock_irqrestore(&priv->sta_lock, flags); | ||
752 | return 0; | ||
753 | } | ||
754 | |||
737 | if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, | 755 | if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, |
738 | &priv->ucode_key_table)) | 756 | &priv->ucode_key_table)) |
739 | IWL_ERROR("index %d not used in uCode key table.\n", | 757 | IWL_ERROR("index %d not used in uCode key table.\n", |
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index fe1867b25ff7..cac732f4047f 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c | |||
@@ -615,7 +615,7 @@ static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, | |||
615 | struct ieee80211_hdr *tx_hdr; | 615 | struct ieee80211_hdr *tx_hdr; |
616 | 616 | ||
617 | tx_hdr = (struct ieee80211_hdr *)skb->data; | 617 | tx_hdr = (struct ieee80211_hdr *)skb->data; |
618 | if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1))) | 618 | if (likely(!memcmp(tx_hdr->addr2, rx_hdr->addr1, ETH_ALEN))) |
619 | { | 619 | { |
620 | __skb_unlink(skb, q); | 620 | __skb_unlink(skb, q); |
621 | tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1); | 621 | tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1); |
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 8f63f4c6b85f..9aad608bcf3f 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c | |||
@@ -16,6 +16,7 @@ | |||
16 | #include <linux/pm.h> | 16 | #include <linux/pm.h> |
17 | #include <linux/init.h> | 17 | #include <linux/init.h> |
18 | #include <linux/slab.h> | 18 | #include <linux/slab.h> |
19 | #include <linux/jiffies.h> | ||
19 | #include <linux/pci-aspm.h> | 20 | #include <linux/pci-aspm.h> |
20 | #include "../pci.h" | 21 | #include "../pci.h" |
21 | 22 | ||
@@ -161,11 +162,12 @@ static void pcie_check_clock_pm(struct pci_dev *pdev) | |||
161 | */ | 162 | */ |
162 | static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) | 163 | static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) |
163 | { | 164 | { |
164 | int pos, child_pos; | 165 | int pos, child_pos, i = 0; |
165 | u16 reg16 = 0; | 166 | u16 reg16 = 0; |
166 | struct pci_dev *child_dev; | 167 | struct pci_dev *child_dev; |
167 | int same_clock = 1; | 168 | int same_clock = 1; |
168 | 169 | unsigned long start_jiffies; | |
170 | u16 child_regs[8], parent_reg; | ||
169 | /* | 171 | /* |
170 | * all functions of a slot should have the same Slot Clock | 172 | * all functions of a slot should have the same Slot Clock |
171 | * Configuration, so just check one function | 173 | * Configuration, so just check one function |
@@ -191,16 +193,19 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) | |||
191 | child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); | 193 | child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); |
192 | pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, | 194 | pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, |
193 | ®16); | 195 | ®16); |
196 | child_regs[i] = reg16; | ||
194 | if (same_clock) | 197 | if (same_clock) |
195 | reg16 |= PCI_EXP_LNKCTL_CCC; | 198 | reg16 |= PCI_EXP_LNKCTL_CCC; |
196 | else | 199 | else |
197 | reg16 &= ~PCI_EXP_LNKCTL_CCC; | 200 | reg16 &= ~PCI_EXP_LNKCTL_CCC; |
198 | pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, | 201 | pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, |
199 | reg16); | 202 | reg16); |
203 | i++; | ||
200 | } | 204 | } |
201 | 205 | ||
202 | /* Configure upstream component */ | 206 | /* Configure upstream component */ |
203 | pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); | 207 | pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); |
208 | parent_reg = reg16; | ||
204 | if (same_clock) | 209 | if (same_clock) |
205 | reg16 |= PCI_EXP_LNKCTL_CCC; | 210 | reg16 |= PCI_EXP_LNKCTL_CCC; |
206 | else | 211 | else |
@@ -212,12 +217,30 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) | |||
212 | pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); | 217 | pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); |
213 | 218 | ||
214 | /* Wait for link training end */ | 219 | /* Wait for link training end */ |
215 | while (1) { | 220 | /* break out after waiting for 1 second */ |
221 | start_jiffies = jiffies; | ||
222 | while ((jiffies - start_jiffies) < HZ) { | ||
216 | pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16); | 223 | pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16); |
217 | if (!(reg16 & PCI_EXP_LNKSTA_LT)) | 224 | if (!(reg16 & PCI_EXP_LNKSTA_LT)) |
218 | break; | 225 | break; |
219 | cpu_relax(); | 226 | cpu_relax(); |
220 | } | 227 | } |
228 | /* training failed -> recover */ | ||
229 | if ((jiffies - start_jiffies) >= HZ) { | ||
230 | dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure" | ||
231 | " common clock\n"); | ||
232 | i = 0; | ||
233 | list_for_each_entry(child_dev, &pdev->subordinate->devices, | ||
234 | bus_list) { | ||
235 | child_pos = pci_find_capability(child_dev, | ||
236 | PCI_CAP_ID_EXP); | ||
237 | pci_write_config_word(child_dev, | ||
238 | child_pos + PCI_EXP_LNKCTL, | ||
239 | child_regs[i]); | ||
240 | i++; | ||
241 | } | ||
242 | pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, parent_reg); | ||
243 | } | ||
221 | } | 244 | } |
222 | 245 | ||
223 | /* | 246 | /* |
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 5049a47030ac..5f4f85f56cb7 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c | |||
@@ -22,6 +22,7 @@ | |||
22 | #include <linux/delay.h> | 22 | #include <linux/delay.h> |
23 | #include <linux/acpi.h> | 23 | #include <linux/acpi.h> |
24 | #include <linux/kallsyms.h> | 24 | #include <linux/kallsyms.h> |
25 | #include <linux/dmi.h> | ||
25 | #include "pci.h" | 26 | #include "pci.h" |
26 | 27 | ||
27 | int isa_dma_bridge_buggy; | 28 | int isa_dma_bridge_buggy; |
@@ -1828,6 +1829,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, | |||
1828 | PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, | 1829 | PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, |
1829 | ht_enable_msi_mapping); | 1830 | ht_enable_msi_mapping); |
1830 | 1831 | ||
1832 | /* The P5N32-SLI Premium motherboard from Asus has a problem with msi | ||
1833 | * for the MCP55 NIC. It is not yet determined whether the msi problem | ||
1834 | * also affects other devices. As for now, turn off msi for this device. | ||
1835 | */ | ||
1836 | static void __devinit nvenet_msi_disable(struct pci_dev *dev) | ||
1837 | { | ||
1838 | if (dmi_name_in_vendors("P5N32-SLI PREMIUM")) { | ||
1839 | dev_info(&dev->dev, | ||
1840 | "Disabling msi for MCP55 NIC on P5N32-SLI Premium\n"); | ||
1841 | dev->no_msi = 1; | ||
1842 | } | ||
1843 | } | ||
1844 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, | ||
1845 | PCI_DEVICE_ID_NVIDIA_NVENET_15, | ||
1846 | nvenet_msi_disable); | ||
1847 | |||
1831 | static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) | 1848 | static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) |
1832 | { | 1849 | { |
1833 | struct pci_dev *host_bridge; | 1850 | struct pci_dev *host_bridge; |
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index 4dd1c3e157ae..5a8ccb4f604d 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c | |||
@@ -253,6 +253,7 @@ placeholder: | |||
253 | __func__, pci_domain_nr(parent), parent->number, slot_nr); | 253 | __func__, pci_domain_nr(parent), parent->number, slot_nr); |
254 | 254 | ||
255 | out: | 255 | out: |
256 | kfree(slot_name); | ||
256 | up_write(&pci_bus_sem); | 257 | up_write(&pci_bus_sem); |
257 | return slot; | 258 | return slot; |
258 | err: | 259 | err: |
diff --git a/drivers/rtc/rtc-ds1672.c b/drivers/rtc/rtc-ds1672.c index 341d7a5b45a2..4e91419e8911 100644 --- a/drivers/rtc/rtc-ds1672.c +++ b/drivers/rtc/rtc-ds1672.c | |||
@@ -209,12 +209,18 @@ static int ds1672_probe(struct i2c_client *client, | |||
209 | return err; | 209 | return err; |
210 | } | 210 | } |
211 | 211 | ||
212 | static struct i2c_device_id ds1672_id[] = { | ||
213 | { "ds1672", 0 }, | ||
214 | { } | ||
215 | }; | ||
216 | |||
212 | static struct i2c_driver ds1672_driver = { | 217 | static struct i2c_driver ds1672_driver = { |
213 | .driver = { | 218 | .driver = { |
214 | .name = "rtc-ds1672", | 219 | .name = "rtc-ds1672", |
215 | }, | 220 | }, |
216 | .probe = &ds1672_probe, | 221 | .probe = &ds1672_probe, |
217 | .remove = &ds1672_remove, | 222 | .remove = &ds1672_remove, |
223 | .id_table = ds1672_id, | ||
218 | }; | 224 | }; |
219 | 225 | ||
220 | static int __init ds1672_init(void) | 226 | static int __init ds1672_init(void) |
diff --git a/drivers/rtc/rtc-max6900.c b/drivers/rtc/rtc-max6900.c index 80782798763f..a4f6665ab3c5 100644 --- a/drivers/rtc/rtc-max6900.c +++ b/drivers/rtc/rtc-max6900.c | |||
@@ -247,12 +247,18 @@ max6900_probe(struct i2c_client *client, const struct i2c_device_id *id) | |||
247 | return 0; | 247 | return 0; |
248 | } | 248 | } |
249 | 249 | ||
250 | static struct i2c_device_id max6900_id[] = { | ||
251 | { "max6900", 0 }, | ||
252 | { } | ||
253 | }; | ||
254 | |||
250 | static struct i2c_driver max6900_driver = { | 255 | static struct i2c_driver max6900_driver = { |
251 | .driver = { | 256 | .driver = { |
252 | .name = "rtc-max6900", | 257 | .name = "rtc-max6900", |
253 | }, | 258 | }, |
254 | .probe = max6900_probe, | 259 | .probe = max6900_probe, |
255 | .remove = max6900_remove, | 260 | .remove = max6900_remove, |
261 | .id_table = max6900_id, | ||
256 | }; | 262 | }; |
257 | 263 | ||
258 | static int __init max6900_init(void) | 264 | static int __init max6900_init(void) |
diff --git a/drivers/rtc/rtc-starfire.c b/drivers/rtc/rtc-starfire.c index 7ccb0dd700af..5be98bfd7ed3 100644 --- a/drivers/rtc/rtc-starfire.c +++ b/drivers/rtc/rtc-starfire.c | |||
@@ -6,7 +6,6 @@ | |||
6 | #include <linux/kernel.h> | 6 | #include <linux/kernel.h> |
7 | #include <linux/module.h> | 7 | #include <linux/module.h> |
8 | #include <linux/init.h> | 8 | #include <linux/init.h> |
9 | #include <linux/time.h> | ||
10 | #include <linux/rtc.h> | 9 | #include <linux/rtc.h> |
11 | #include <linux/platform_device.h> | 10 | #include <linux/platform_device.h> |
12 | 11 | ||
@@ -16,11 +15,6 @@ MODULE_AUTHOR("David S. Miller <davem@davemloft.net>"); | |||
16 | MODULE_DESCRIPTION("Starfire RTC driver"); | 15 | MODULE_DESCRIPTION("Starfire RTC driver"); |
17 | MODULE_LICENSE("GPL"); | 16 | MODULE_LICENSE("GPL"); |
18 | 17 | ||
19 | struct starfire_rtc { | ||
20 | struct rtc_device *rtc; | ||
21 | spinlock_t lock; | ||
22 | }; | ||
23 | |||
24 | static u32 starfire_get_time(void) | 18 | static u32 starfire_get_time(void) |
25 | { | 19 | { |
26 | static char obp_gettod[32]; | 20 | static char obp_gettod[32]; |
@@ -35,64 +29,31 @@ static u32 starfire_get_time(void) | |||
35 | 29 | ||
36 | static int starfire_read_time(struct device *dev, struct rtc_time *tm) | 30 | static int starfire_read_time(struct device *dev, struct rtc_time *tm) |
37 | { | 31 | { |
38 | struct starfire_rtc *p = dev_get_drvdata(dev); | 32 | rtc_time_to_tm(starfire_get_time(), tm); |
39 | unsigned long flags, secs; | 33 | return rtc_valid_tm(tm); |
40 | |||
41 | spin_lock_irqsave(&p->lock, flags); | ||
42 | secs = starfire_get_time(); | ||
43 | spin_unlock_irqrestore(&p->lock, flags); | ||
44 | |||
45 | rtc_time_to_tm(secs, tm); | ||
46 | |||
47 | return 0; | ||
48 | } | ||
49 | |||
50 | static int starfire_set_time(struct device *dev, struct rtc_time *tm) | ||
51 | { | ||
52 | unsigned long secs; | ||
53 | int err; | ||
54 | |||
55 | err = rtc_tm_to_time(tm, &secs); | ||
56 | if (err) | ||
57 | return err; | ||
58 | |||
59 | /* Do nothing, time is set using the service processor | ||
60 | * console on this platform. | ||
61 | */ | ||
62 | return 0; | ||
63 | } | 34 | } |
64 | 35 | ||
65 | static const struct rtc_class_ops starfire_rtc_ops = { | 36 | static const struct rtc_class_ops starfire_rtc_ops = { |
66 | .read_time = starfire_read_time, | 37 | .read_time = starfire_read_time, |
67 | .set_time = starfire_set_time, | ||
68 | }; | 38 | }; |
69 | 39 | ||
70 | static int __devinit starfire_rtc_probe(struct platform_device *pdev) | 40 | static int __init starfire_rtc_probe(struct platform_device *pdev) |
71 | { | 41 | { |
72 | struct starfire_rtc *p = kzalloc(sizeof(*p), GFP_KERNEL); | 42 | struct rtc_device *rtc = rtc_device_register("starfire", &pdev->dev, |
73 | 43 | &starfire_rtc_ops, THIS_MODULE); | |
74 | if (!p) | 44 | if (IS_ERR(rtc)) |
75 | return -ENOMEM; | 45 | return PTR_ERR(rtc); |
76 | 46 | ||
77 | spin_lock_init(&p->lock); | 47 | platform_set_drvdata(pdev, rtc); |
78 | 48 | ||
79 | p->rtc = rtc_device_register("starfire", &pdev->dev, | ||
80 | &starfire_rtc_ops, THIS_MODULE); | ||
81 | if (IS_ERR(p->rtc)) { | ||
82 | int err = PTR_ERR(p->rtc); | ||
83 | kfree(p); | ||
84 | return err; | ||
85 | } | ||
86 | platform_set_drvdata(pdev, p); | ||
87 | return 0; | 49 | return 0; |
88 | } | 50 | } |
89 | 51 | ||
90 | static int __devexit starfire_rtc_remove(struct platform_device *pdev) | 52 | static int __exit starfire_rtc_remove(struct platform_device *pdev) |
91 | { | 53 | { |
92 | struct starfire_rtc *p = platform_get_drvdata(pdev); | 54 | struct rtc_device *rtc = platform_get_drvdata(pdev); |
93 | 55 | ||
94 | rtc_device_unregister(p->rtc); | 56 | rtc_device_unregister(rtc); |
95 | kfree(p); | ||
96 | 57 | ||
97 | return 0; | 58 | return 0; |
98 | } | 59 | } |
@@ -102,13 +63,12 @@ static struct platform_driver starfire_rtc_driver = { | |||
102 | .name = "rtc-starfire", | 63 | .name = "rtc-starfire", |
103 | .owner = THIS_MODULE, | 64 | .owner = THIS_MODULE, |
104 | }, | 65 | }, |
105 | .probe = starfire_rtc_probe, | 66 | .remove = __exit_p(starfire_rtc_remove), |
106 | .remove = __devexit_p(starfire_rtc_remove), | ||
107 | }; | 67 | }; |
108 | 68 | ||
109 | static int __init starfire_rtc_init(void) | 69 | static int __init starfire_rtc_init(void) |
110 | { | 70 | { |
111 | return platform_driver_register(&starfire_rtc_driver); | 71 | return platform_driver_probe(&starfire_rtc_driver, starfire_rtc_probe); |
112 | } | 72 | } |
113 | 73 | ||
114 | static void __exit starfire_rtc_exit(void) | 74 | static void __exit starfire_rtc_exit(void) |
diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c index abe87a4d2665..01d8da9afdc8 100644 --- a/drivers/rtc/rtc-twl4030.c +++ b/drivers/rtc/rtc-twl4030.c | |||
@@ -337,7 +337,7 @@ static int twl4030_rtc_ioctl(struct device *dev, unsigned int cmd, | |||
337 | } | 337 | } |
338 | 338 | ||
339 | #else | 339 | #else |
340 | #define omap_rtc_ioctl NULL | 340 | #define twl4030_rtc_ioctl NULL |
341 | #endif | 341 | #endif |
342 | 342 | ||
343 | static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) | 343 | static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) |
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 35364f64da7f..c557ba34e1aa 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c | |||
@@ -720,7 +720,6 @@ static int zfcp_erp_adapter_strategy_generic(struct zfcp_erp_action *act, | |||
720 | goto failed_openfcp; | 720 | goto failed_openfcp; |
721 | 721 | ||
722 | atomic_set_mask(ZFCP_STATUS_COMMON_OPEN, &act->adapter->status); | 722 | atomic_set_mask(ZFCP_STATUS_COMMON_OPEN, &act->adapter->status); |
723 | schedule_work(&act->adapter->scan_work); | ||
724 | 723 | ||
725 | return ZFCP_ERP_SUCCEEDED; | 724 | return ZFCP_ERP_SUCCEEDED; |
726 | 725 | ||
@@ -1186,7 +1185,9 @@ static void zfcp_erp_scsi_scan(struct work_struct *work) | |||
1186 | container_of(work, struct zfcp_erp_add_work, work); | 1185 | container_of(work, struct zfcp_erp_add_work, work); |
1187 | struct zfcp_unit *unit = p->unit; | 1186 | struct zfcp_unit *unit = p->unit; |
1188 | struct fc_rport *rport = unit->port->rport; | 1187 | struct fc_rport *rport = unit->port->rport; |
1189 | scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, | 1188 | |
1189 | if (rport && rport->port_state == FC_PORTSTATE_ONLINE) | ||
1190 | scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, | ||
1190 | scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0); | 1191 | scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0); |
1191 | atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); | 1192 | atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); |
1192 | zfcp_unit_put(unit); | 1193 | zfcp_unit_put(unit); |
@@ -1282,6 +1283,8 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) | |||
1282 | case ZFCP_ERP_ACTION_REOPEN_ADAPTER: | 1283 | case ZFCP_ERP_ACTION_REOPEN_ADAPTER: |
1283 | if (result != ZFCP_ERP_SUCCEEDED) | 1284 | if (result != ZFCP_ERP_SUCCEEDED) |
1284 | zfcp_erp_rports_del(adapter); | 1285 | zfcp_erp_rports_del(adapter); |
1286 | else | ||
1287 | schedule_work(&adapter->scan_work); | ||
1285 | zfcp_adapter_put(adapter); | 1288 | zfcp_adapter_put(adapter); |
1286 | break; | 1289 | break; |
1287 | } | 1290 | } |
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 1a7c80a77ff5..8aab3091a7b1 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c | |||
@@ -50,7 +50,8 @@ static int zfcp_wka_port_get(struct zfcp_wka_port *wka_port) | |||
50 | if (mutex_lock_interruptible(&wka_port->mutex)) | 50 | if (mutex_lock_interruptible(&wka_port->mutex)) |
51 | return -ERESTARTSYS; | 51 | return -ERESTARTSYS; |
52 | 52 | ||
53 | if (wka_port->status != ZFCP_WKA_PORT_ONLINE) { | 53 | if (wka_port->status == ZFCP_WKA_PORT_OFFLINE || |
54 | wka_port->status == ZFCP_WKA_PORT_CLOSING) { | ||
54 | wka_port->status = ZFCP_WKA_PORT_OPENING; | 55 | wka_port->status = ZFCP_WKA_PORT_OPENING; |
55 | if (zfcp_fsf_open_wka_port(wka_port)) | 56 | if (zfcp_fsf_open_wka_port(wka_port)) |
56 | wka_port->status = ZFCP_WKA_PORT_OFFLINE; | 57 | wka_port->status = ZFCP_WKA_PORT_OFFLINE; |
@@ -125,8 +126,7 @@ static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range, | |||
125 | 126 | ||
126 | read_lock_irqsave(&zfcp_data.config_lock, flags); | 127 | read_lock_irqsave(&zfcp_data.config_lock, flags); |
127 | list_for_each_entry(port, &fsf_req->adapter->port_list_head, list) { | 128 | list_for_each_entry(port, &fsf_req->adapter->port_list_head, list) { |
128 | /* FIXME: ZFCP_STATUS_PORT_DID_DID check is racy */ | 129 | if (!(atomic_read(&port->status) & ZFCP_STATUS_PORT_PHYS_OPEN)) |
129 | if (!(atomic_read(&port->status) & ZFCP_STATUS_PORT_DID_DID)) | ||
130 | /* Try to connect to unused ports anyway. */ | 130 | /* Try to connect to unused ports anyway. */ |
131 | zfcp_erp_port_reopen(port, | 131 | zfcp_erp_port_reopen(port, |
132 | ZFCP_STATUS_COMMON_ERP_FAILED, | 132 | ZFCP_STATUS_COMMON_ERP_FAILED, |
@@ -610,7 +610,6 @@ int zfcp_scan_ports(struct zfcp_adapter *adapter) | |||
610 | int ret, i; | 610 | int ret, i; |
611 | struct zfcp_gpn_ft *gpn_ft; | 611 | struct zfcp_gpn_ft *gpn_ft; |
612 | 612 | ||
613 | zfcp_erp_wait(adapter); /* wait until adapter is finished with ERP */ | ||
614 | if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT) | 613 | if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT) |
615 | return 0; | 614 | return 0; |
616 | 615 | ||
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index d024442ee128..dc0367690405 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c | |||
@@ -930,8 +930,10 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id, | |||
930 | goto out; | 930 | goto out; |
931 | req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND, | 931 | req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND, |
932 | req_flags, adapter->pool.fsf_req_abort); | 932 | req_flags, adapter->pool.fsf_req_abort); |
933 | if (IS_ERR(req)) | 933 | if (IS_ERR(req)) { |
934 | req = NULL; | ||
934 | goto out; | 935 | goto out; |
936 | } | ||
935 | 937 | ||
936 | if (unlikely(!(atomic_read(&unit->status) & | 938 | if (unlikely(!(atomic_read(&unit->status) & |
937 | ZFCP_STATUS_COMMON_UNBLOCKED))) | 939 | ZFCP_STATUS_COMMON_UNBLOCKED))) |
@@ -1584,6 +1586,7 @@ static void zfcp_fsf_open_wka_port_handler(struct zfcp_fsf_req *req) | |||
1584 | wka_port->status = ZFCP_WKA_PORT_OFFLINE; | 1586 | wka_port->status = ZFCP_WKA_PORT_OFFLINE; |
1585 | break; | 1587 | break; |
1586 | case FSF_PORT_ALREADY_OPEN: | 1588 | case FSF_PORT_ALREADY_OPEN: |
1589 | break; | ||
1587 | case FSF_GOOD: | 1590 | case FSF_GOOD: |
1588 | wka_port->handle = header->port_handle; | 1591 | wka_port->handle = header->port_handle; |
1589 | wka_port->status = ZFCP_WKA_PORT_ONLINE; | 1592 | wka_port->status = ZFCP_WKA_PORT_ONLINE; |
@@ -2113,18 +2116,21 @@ static inline void zfcp_fsf_trace_latency(struct zfcp_fsf_req *fsf_req) | |||
2113 | 2116 | ||
2114 | static void zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *req) | 2117 | static void zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *req) |
2115 | { | 2118 | { |
2116 | struct scsi_cmnd *scpnt = req->data; | 2119 | struct scsi_cmnd *scpnt; |
2117 | struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *) | 2120 | struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *) |
2118 | &(req->qtcb->bottom.io.fcp_rsp); | 2121 | &(req->qtcb->bottom.io.fcp_rsp); |
2119 | u32 sns_len; | 2122 | u32 sns_len; |
2120 | char *fcp_rsp_info = (unsigned char *) &fcp_rsp_iu[1]; | 2123 | char *fcp_rsp_info = (unsigned char *) &fcp_rsp_iu[1]; |
2121 | unsigned long flags; | 2124 | unsigned long flags; |
2122 | 2125 | ||
2123 | if (unlikely(!scpnt)) | ||
2124 | return; | ||
2125 | |||
2126 | read_lock_irqsave(&req->adapter->abort_lock, flags); | 2126 | read_lock_irqsave(&req->adapter->abort_lock, flags); |
2127 | 2127 | ||
2128 | scpnt = req->data; | ||
2129 | if (unlikely(!scpnt)) { | ||
2130 | read_unlock_irqrestore(&req->adapter->abort_lock, flags); | ||
2131 | return; | ||
2132 | } | ||
2133 | |||
2128 | if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ABORTED)) { | 2134 | if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ABORTED)) { |
2129 | set_host_byte(scpnt, DID_SOFT_ERROR); | 2135 | set_host_byte(scpnt, DID_SOFT_ERROR); |
2130 | set_driver_byte(scpnt, SUGGEST_RETRY); | 2136 | set_driver_byte(scpnt, SUGGEST_RETRY); |
@@ -2442,8 +2448,10 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *adapter, | |||
2442 | goto out; | 2448 | goto out; |
2443 | req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, | 2449 | req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, |
2444 | adapter->pool.fsf_req_scsi); | 2450 | adapter->pool.fsf_req_scsi); |
2445 | if (IS_ERR(req)) | 2451 | if (IS_ERR(req)) { |
2452 | req = NULL; | ||
2446 | goto out; | 2453 | goto out; |
2454 | } | ||
2447 | 2455 | ||
2448 | req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT; | 2456 | req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT; |
2449 | req->data = unit; | 2457 | req->data = unit; |
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index e46fd3e9f68f..468c880f8b6d 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c | |||
@@ -88,7 +88,7 @@ static int zfcp_scsi_queuecommand(struct scsi_cmnd *scpnt, | |||
88 | ret = zfcp_fsf_send_fcp_command_task(adapter, unit, scpnt, 0, | 88 | ret = zfcp_fsf_send_fcp_command_task(adapter, unit, scpnt, 0, |
89 | ZFCP_REQ_AUTO_CLEANUP); | 89 | ZFCP_REQ_AUTO_CLEANUP); |
90 | if (unlikely(ret == -EBUSY)) | 90 | if (unlikely(ret == -EBUSY)) |
91 | zfcp_scsi_command_fail(scpnt, DID_NO_CONNECT); | 91 | return SCSI_MLQUEUE_DEVICE_BUSY; |
92 | else if (unlikely(ret < 0)) | 92 | else if (unlikely(ret < 0)) |
93 | return SCSI_MLQUEUE_HOST_BUSY; | 93 | return SCSI_MLQUEUE_HOST_BUSY; |
94 | 94 | ||
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 9aa301c1ed07..162cd927d94b 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c | |||
@@ -427,8 +427,8 @@ static int aac_slave_configure(struct scsi_device *sdev) | |||
427 | * Firmware has an individual device recovery time typically | 427 | * Firmware has an individual device recovery time typically |
428 | * of 35 seconds, give us a margin. | 428 | * of 35 seconds, give us a margin. |
429 | */ | 429 | */ |
430 | if (sdev->timeout < (45 * HZ)) | 430 | if (sdev->request_queue->rq_timeout < (45 * HZ)) |
431 | sdev->timeout = 45 * HZ; | 431 | blk_queue_rq_timeout(sdev->request_queue, 45*HZ); |
432 | for (cid = 0; cid < aac->maximum_num_containers; ++cid) | 432 | for (cid = 0; cid < aac->maximum_num_containers; ++cid) |
433 | if (aac->fsa_dev[cid].valid) | 433 | if (aac->fsa_dev[cid].valid) |
434 | ++num_lsu; | 434 | ++num_lsu; |
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 87e09f35d3d4..6cad1758243a 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c | |||
@@ -1442,7 +1442,7 @@ static int ibmvscsi_slave_configure(struct scsi_device *sdev) | |||
1442 | spin_lock_irqsave(shost->host_lock, lock_flags); | 1442 | spin_lock_irqsave(shost->host_lock, lock_flags); |
1443 | if (sdev->type == TYPE_DISK) { | 1443 | if (sdev->type == TYPE_DISK) { |
1444 | sdev->allow_restart = 1; | 1444 | sdev->allow_restart = 1; |
1445 | sdev->timeout = 60 * HZ; | 1445 | blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); |
1446 | } | 1446 | } |
1447 | scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun); | 1447 | scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun); |
1448 | spin_unlock_irqrestore(shost->host_lock, lock_flags); | 1448 | spin_unlock_irqrestore(shost->host_lock, lock_flags); |
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index a454f94623d7..17ce7abe17ee 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c | |||
@@ -1016,7 +1016,8 @@ static int megasas_slave_configure(struct scsi_device *sdev) | |||
1016 | * The RAID firmware may require extended timeouts. | 1016 | * The RAID firmware may require extended timeouts. |
1017 | */ | 1017 | */ |
1018 | if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS) | 1018 | if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS) |
1019 | sdev->timeout = MEGASAS_DEFAULT_CMD_TIMEOUT * HZ; | 1019 | blk_queue_rq_timeout(sdev->request_queue, |
1020 | MEGASAS_DEFAULT_CMD_TIMEOUT * HZ); | ||
1020 | return 0; | 1021 | return 0; |
1021 | } | 1022 | } |
1022 | 1023 | ||
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 386361778ebb..edfaf241c5ba 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c | |||
@@ -932,8 +932,7 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) | |||
932 | int i, rtn = NEEDS_RETRY; | 932 | int i, rtn = NEEDS_RETRY; |
933 | 933 | ||
934 | for (i = 0; rtn == NEEDS_RETRY && i < 2; i++) | 934 | for (i = 0; rtn == NEEDS_RETRY && i < 2; i++) |
935 | rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, | 935 | rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, scmd->device->request_queue->rq_timeout, 0); |
936 | scmd->device->timeout, 0); | ||
937 | 936 | ||
938 | if (rtn == SUCCESS) | 937 | if (rtn == SUCCESS) |
939 | return 0; | 938 | return 0; |
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index f5d3b96890dc..fa45a1a66867 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c | |||
@@ -567,15 +567,18 @@ static inline int scsi_host_is_busy(struct Scsi_Host *shost) | |||
567 | */ | 567 | */ |
568 | static void scsi_run_queue(struct request_queue *q) | 568 | static void scsi_run_queue(struct request_queue *q) |
569 | { | 569 | { |
570 | struct scsi_device *starved_head = NULL, *sdev = q->queuedata; | 570 | struct scsi_device *sdev = q->queuedata; |
571 | struct Scsi_Host *shost = sdev->host; | 571 | struct Scsi_Host *shost = sdev->host; |
572 | LIST_HEAD(starved_list); | ||
572 | unsigned long flags; | 573 | unsigned long flags; |
573 | 574 | ||
574 | if (scsi_target(sdev)->single_lun) | 575 | if (scsi_target(sdev)->single_lun) |
575 | scsi_single_lun_run(sdev); | 576 | scsi_single_lun_run(sdev); |
576 | 577 | ||
577 | spin_lock_irqsave(shost->host_lock, flags); | 578 | spin_lock_irqsave(shost->host_lock, flags); |
578 | while (!list_empty(&shost->starved_list) && !scsi_host_is_busy(shost)) { | 579 | list_splice_init(&shost->starved_list, &starved_list); |
580 | |||
581 | while (!list_empty(&starved_list)) { | ||
579 | int flagset; | 582 | int flagset; |
580 | 583 | ||
581 | /* | 584 | /* |
@@ -588,24 +591,18 @@ static void scsi_run_queue(struct request_queue *q) | |||
588 | * scsi_request_fn must get the host_lock before checking | 591 | * scsi_request_fn must get the host_lock before checking |
589 | * or modifying starved_list or starved_entry. | 592 | * or modifying starved_list or starved_entry. |
590 | */ | 593 | */ |
591 | sdev = list_entry(shost->starved_list.next, | 594 | if (scsi_host_is_busy(shost)) |
592 | struct scsi_device, starved_entry); | ||
593 | /* | ||
594 | * The *queue_ready functions can add a device back onto the | ||
595 | * starved list's tail, so we must check for a infinite loop. | ||
596 | */ | ||
597 | if (sdev == starved_head) | ||
598 | break; | 595 | break; |
599 | if (!starved_head) | ||
600 | starved_head = sdev; | ||
601 | 596 | ||
597 | sdev = list_entry(starved_list.next, | ||
598 | struct scsi_device, starved_entry); | ||
599 | list_del_init(&sdev->starved_entry); | ||
602 | if (scsi_target_is_busy(scsi_target(sdev))) { | 600 | if (scsi_target_is_busy(scsi_target(sdev))) { |
603 | list_move_tail(&sdev->starved_entry, | 601 | list_move_tail(&sdev->starved_entry, |
604 | &shost->starved_list); | 602 | &shost->starved_list); |
605 | continue; | 603 | continue; |
606 | } | 604 | } |
607 | 605 | ||
608 | list_del_init(&sdev->starved_entry); | ||
609 | spin_unlock(shost->host_lock); | 606 | spin_unlock(shost->host_lock); |
610 | 607 | ||
611 | spin_lock(sdev->request_queue->queue_lock); | 608 | spin_lock(sdev->request_queue->queue_lock); |
@@ -621,6 +618,8 @@ static void scsi_run_queue(struct request_queue *q) | |||
621 | 618 | ||
622 | spin_lock(shost->host_lock); | 619 | spin_lock(shost->host_lock); |
623 | } | 620 | } |
621 | /* put any unprocessed entries back */ | ||
622 | list_splice(&starved_list, &shost->starved_list); | ||
624 | spin_unlock_irqrestore(shost->host_lock, flags); | 623 | spin_unlock_irqrestore(shost->host_lock, flags); |
625 | 624 | ||
626 | blk_run_queue(q); | 625 | blk_run_queue(q); |
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index c9e1242eaf25..5081b3981d3c 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c | |||
@@ -757,7 +757,7 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode, | |||
757 | * access to the device is prohibited. | 757 | * access to the device is prohibited. |
758 | */ | 758 | */ |
759 | error = scsi_nonblockable_ioctl(sdp, cmd, p, | 759 | error = scsi_nonblockable_ioctl(sdp, cmd, p, |
760 | (mode & FMODE_NDELAY_NOW) != 0); | 760 | (mode & FMODE_NDELAY) != 0); |
761 | if (!scsi_block_when_processing_errors(sdp) || !error) | 761 | if (!scsi_block_when_processing_errors(sdp) || !error) |
762 | return error; | 762 | return error; |
763 | 763 | ||
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 62b6633e3a97..45b66b98a516 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c | |||
@@ -521,7 +521,7 @@ static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, | |||
521 | * if it doesn't recognise the ioctl | 521 | * if it doesn't recognise the ioctl |
522 | */ | 522 | */ |
523 | ret = scsi_nonblockable_ioctl(sdev, cmd, argp, | 523 | ret = scsi_nonblockable_ioctl(sdev, cmd, argp, |
524 | (mode & FMODE_NDELAY_NOW) != 0); | 524 | (mode & FMODE_NDELAY) != 0); |
525 | if (ret != -ENODEV) | 525 | if (ret != -ENODEV) |
526 | return ret; | 526 | return ret; |
527 | return scsi_ioctl(sdev, cmd, argp); | 527 | return scsi_ioctl(sdev, cmd, argp); |
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index 3790906a77d1..2fa830c0be27 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c | |||
@@ -477,7 +477,7 @@ stex_slave_config(struct scsi_device *sdev) | |||
477 | { | 477 | { |
478 | sdev->use_10_for_rw = 1; | 478 | sdev->use_10_for_rw = 1; |
479 | sdev->use_10_for_ms = 1; | 479 | sdev->use_10_for_ms = 1; |
480 | sdev->timeout = 60 * HZ; | 480 | blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); |
481 | sdev->tagged_supported = 1; | 481 | sdev->tagged_supported = 1; |
482 | 482 | ||
483 | return 0; | 483 | return 0; |
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 6dd98f9fb89c..ae3699d77dd0 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c | |||
@@ -2149,7 +2149,7 @@ out4: | |||
2149 | return ret; | 2149 | return ret; |
2150 | } | 2150 | } |
2151 | 2151 | ||
2152 | static struct ioc3_submodule ioc3uart_submodule = { | 2152 | static struct ioc3_submodule ioc3uart_ops = { |
2153 | .name = "IOC3uart", | 2153 | .name = "IOC3uart", |
2154 | .probe = ioc3uart_probe, | 2154 | .probe = ioc3uart_probe, |
2155 | .remove = ioc3uart_remove, | 2155 | .remove = ioc3uart_remove, |
@@ -2173,7 +2173,7 @@ static int __devinit ioc3uart_init(void) | |||
2173 | __func__); | 2173 | __func__); |
2174 | return ret; | 2174 | return ret; |
2175 | } | 2175 | } |
2176 | ret = ioc3_register_submodule(&ioc3uart_submodule); | 2176 | ret = ioc3_register_submodule(&ioc3uart_ops); |
2177 | if (ret) | 2177 | if (ret) |
2178 | uart_unregister_driver(&ioc3_uart); | 2178 | uart_unregister_driver(&ioc3_uart); |
2179 | return ret; | 2179 | return ret; |
@@ -2181,7 +2181,7 @@ static int __devinit ioc3uart_init(void) | |||
2181 | 2181 | ||
2182 | static void __devexit ioc3uart_exit(void) | 2182 | static void __devexit ioc3uart_exit(void) |
2183 | { | 2183 | { |
2184 | ioc3_unregister_submodule(&ioc3uart_submodule); | 2184 | ioc3_unregister_submodule(&ioc3uart_ops); |
2185 | uart_unregister_driver(&ioc3_uart); | 2185 | uart_unregister_driver(&ioc3_uart); |
2186 | } | 2186 | } |
2187 | 2187 | ||
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 6117d3db0b66..28c00c3d58f5 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c | |||
@@ -591,8 +591,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, | |||
591 | /* Update the per-port timeout */ | 591 | /* Update the per-port timeout */ |
592 | uart_update_timeout(port, new->c_cflag, baud); | 592 | uart_update_timeout(port, new->c_cflag, baud); |
593 | 593 | ||
594 | /* Do our best to flush TX & RX, so we don't loose anything */ | 594 | /* Do our best to flush TX & RX, so we don't lose anything */ |
595 | /* But we don't wait indefinitly ! */ | 595 | /* But we don't wait indefinitely ! */ |
596 | j = 5000000; /* Maximum wait */ | 596 | j = 5000000; /* Maximum wait */ |
597 | /* FIXME Can't receive chars since set_termios might be called at early | 597 | /* FIXME Can't receive chars since set_termios might be called at early |
598 | * boot for the console, all stuff is not yet ready to receive at that | 598 | * boot for the console, all stuff is not yet ready to receive at that |
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c index 317d239ab740..29cbb0afef8e 100644 --- a/drivers/serial/s3c2440.c +++ b/drivers/serial/s3c2440.c | |||
@@ -177,5 +177,5 @@ module_exit(s3c2440_serial_exit); | |||
177 | 177 | ||
178 | MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver"); | 178 | MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver"); |
179 | MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); | 179 | MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); |
180 | MODULE_LICENSE("GPLi v2"); | 180 | MODULE_LICENSE("GPL v2"); |
181 | MODULE_ALIAS("platform:s3c2440-uart"); | 181 | MODULE_ALIAS("platform:s3c2440-uart"); |
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 91697bdb399f..4bbddb73abd9 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c | |||
@@ -18,6 +18,7 @@ | |||
18 | #include <linux/jiffies.h> | 18 | #include <linux/jiffies.h> |
19 | #include <linux/platform_device.h> | 19 | #include <linux/platform_device.h> |
20 | #include <linux/clk.h> | 20 | #include <linux/clk.h> |
21 | #include <linux/gpio.h> | ||
21 | 22 | ||
22 | #include <mach/hardware.h> | 23 | #include <mach/hardware.h> |
23 | #include <asm/io.h> | 24 | #include <asm/io.h> |
@@ -25,7 +26,6 @@ | |||
25 | 26 | ||
26 | #include <mach/mux.h> | 27 | #include <mach/mux.h> |
27 | #include <mach/irqs.h> | 28 | #include <mach/irqs.h> |
28 | #include <mach/gpio.h> | ||
29 | #include <mach/fpga.h> | 29 | #include <mach/fpga.h> |
30 | #include <mach/usb.h> | 30 | #include <mach/usb.h> |
31 | 31 | ||
@@ -254,8 +254,8 @@ static int ohci_omap_init(struct usb_hcd *hcd) | |||
254 | 254 | ||
255 | /* gpio9 for overcurrent detction */ | 255 | /* gpio9 for overcurrent detction */ |
256 | omap_cfg_reg(W8_1610_GPIO9); | 256 | omap_cfg_reg(W8_1610_GPIO9); |
257 | omap_request_gpio(9); | 257 | gpio_request(9, "OHCI overcurrent"); |
258 | omap_set_gpio_direction(9, 1 /* IN */); | 258 | gpio_direction_input(9); |
259 | 259 | ||
260 | /* for paranoia's sake: disable USB.PUEN */ | 260 | /* for paranoia's sake: disable USB.PUEN */ |
261 | omap_cfg_reg(W4_USB_HIGHZ); | 261 | omap_cfg_reg(W4_USB_HIGHZ); |
@@ -407,7 +407,7 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) | |||
407 | put_device(ohci->transceiver->dev); | 407 | put_device(ohci->transceiver->dev); |
408 | } | 408 | } |
409 | if (machine_is_omap_osk()) | 409 | if (machine_is_omap_osk()) |
410 | omap_free_gpio(9); | 410 | gpio_free(9); |
411 | iounmap(hcd->regs); | 411 | iounmap(hcd->regs); |
412 | release_mem_region(hcd->rsrc_start, hcd->rsrc_len); | 412 | release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
413 | usb_put_hcd(hcd); | 413 | usb_put_hcd(hcd); |
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 51d7bdea2869..aad1359a3eb1 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c | |||
@@ -1498,7 +1498,7 @@ static int ftdi_open(struct tty_struct *tty, | |||
1498 | priv->interface, buf, 0, WDR_TIMEOUT); | 1498 | priv->interface, buf, 0, WDR_TIMEOUT); |
1499 | 1499 | ||
1500 | /* Termios defaults are set by usb_serial_init. We don't change | 1500 | /* Termios defaults are set by usb_serial_init. We don't change |
1501 | port->tty->termios - this would loose speed settings, etc. | 1501 | port->tty->termios - this would lose speed settings, etc. |
1502 | This is same behaviour as serial.c/rs_open() - Kuba */ | 1502 | This is same behaviour as serial.c/rs_open() - Kuba */ |
1503 | 1503 | ||
1504 | /* ftdi_set_termios will send usb control messages */ | 1504 | /* ftdi_set_termios will send usb control messages */ |
diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c index a547e5d4c8bf..8da5e5ab8547 100644 --- a/drivers/video/aty/radeon_accel.c +++ b/drivers/video/aty/radeon_accel.c | |||
@@ -256,7 +256,8 @@ void radeonfb_imageblit(struct fb_info *info, const struct fb_image *image) | |||
256 | return; | 256 | return; |
257 | 257 | ||
258 | /* We only do 1 bpp color expansion for now */ | 258 | /* We only do 1 bpp color expansion for now */ |
259 | if (info->flags & FBINFO_HWACCEL_DISABLED || image->depth != 1) | 259 | if (!accel_cexp || |
260 | (info->flags & FBINFO_HWACCEL_DISABLED) || image->depth != 1) | ||
260 | goto fallback; | 261 | goto fallback; |
261 | 262 | ||
262 | /* Fallback if running out of the screen. We may do clipping | 263 | /* Fallback if running out of the screen. We may do clipping |
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index b3ffe8205d2b..d5b27f9d374d 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c | |||
@@ -282,6 +282,8 @@ static int backlight = 1; | |||
282 | static int backlight = 0; | 282 | static int backlight = 0; |
283 | #endif | 283 | #endif |
284 | 284 | ||
285 | int accel_cexp = 0; | ||
286 | |||
285 | /* | 287 | /* |
286 | * prototypes | 288 | * prototypes |
287 | */ | 289 | */ |
@@ -2520,6 +2522,8 @@ static int __init radeonfb_setup (char *options) | |||
2520 | } else if (!strncmp(this_opt, "ignore_devlist", 14)) { | 2522 | } else if (!strncmp(this_opt, "ignore_devlist", 14)) { |
2521 | ignore_devlist = 1; | 2523 | ignore_devlist = 1; |
2522 | #endif | 2524 | #endif |
2525 | } else if (!strncmp(this_opt, "accel_cexp", 12)) { | ||
2526 | accel_cexp = 1; | ||
2523 | } else | 2527 | } else |
2524 | mode_option = this_opt; | 2528 | mode_option = this_opt; |
2525 | } | 2529 | } |
@@ -2567,6 +2571,8 @@ module_param(monitor_layout, charp, 0); | |||
2567 | MODULE_PARM_DESC(monitor_layout, "Specify monitor mapping (like XFree86)"); | 2571 | MODULE_PARM_DESC(monitor_layout, "Specify monitor mapping (like XFree86)"); |
2568 | module_param(force_measure_pll, bool, 0); | 2572 | module_param(force_measure_pll, bool, 0); |
2569 | MODULE_PARM_DESC(force_measure_pll, "Force measurement of PLL (debug)"); | 2573 | MODULE_PARM_DESC(force_measure_pll, "Force measurement of PLL (debug)"); |
2574 | module_param(accel_cexp, bool, 0); | ||
2575 | MODULE_PARM_DESC(accel_cexp, "Use acceleration engine for color expansion"); | ||
2570 | #ifdef CONFIG_MTRR | 2576 | #ifdef CONFIG_MTRR |
2571 | module_param(nomtrr, bool, 0); | 2577 | module_param(nomtrr, bool, 0); |
2572 | MODULE_PARM_DESC(nomtrr, "bool: disable use of MTRR registers"); | 2578 | MODULE_PARM_DESC(nomtrr, "bool: disable use of MTRR registers"); |
diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h index ea0b5b47acaf..974ca6d86540 100644 --- a/drivers/video/aty/radeonfb.h +++ b/drivers/video/aty/radeonfb.h | |||
@@ -638,4 +638,6 @@ static inline void radeonfb_bl_init(struct radeonfb_info *rinfo) {} | |||
638 | static inline void radeonfb_bl_exit(struct radeonfb_info *rinfo) {} | 638 | static inline void radeonfb_bl_exit(struct radeonfb_info *rinfo) {} |
639 | #endif | 639 | #endif |
640 | 640 | ||
641 | extern int accel_cexp; | ||
642 | |||
641 | #endif /* __RADEONFB_H__ */ | 643 | #endif /* __RADEONFB_H__ */ |
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 67ff370d80af..0b2adefe9e3d 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c | |||
@@ -3531,12 +3531,18 @@ static void fbcon_exit(void) | |||
3531 | softback_buf = 0UL; | 3531 | softback_buf = 0UL; |
3532 | 3532 | ||
3533 | for (i = 0; i < FB_MAX; i++) { | 3533 | for (i = 0; i < FB_MAX; i++) { |
3534 | int pending; | ||
3535 | |||
3534 | mapped = 0; | 3536 | mapped = 0; |
3535 | info = registered_fb[i]; | 3537 | info = registered_fb[i]; |
3536 | 3538 | ||
3537 | if (info == NULL) | 3539 | if (info == NULL) |
3538 | continue; | 3540 | continue; |
3539 | 3541 | ||
3542 | pending = cancel_work_sync(&info->queue); | ||
3543 | DPRINTK("fbcon: %s pending work\n", (pending ? "canceled" : | ||
3544 | "no")); | ||
3545 | |||
3540 | for (j = first_fb_vc; j <= last_fb_vc; j++) { | 3546 | for (j = first_fb_vc; j <= last_fb_vc; j++) { |
3541 | if (con2fb_map[j] == i) | 3547 | if (con2fb_map[j] == i) |
3542 | mapped = 1; | 3548 | mapped = 1; |
diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c index b790ddff76f9..ee380d5f3410 100644 --- a/drivers/video/macfb.c +++ b/drivers/video/macfb.c | |||
@@ -164,7 +164,6 @@ static struct fb_var_screeninfo macfb_defined = { | |||
164 | }; | 164 | }; |
165 | 165 | ||
166 | static struct fb_fix_screeninfo macfb_fix = { | 166 | static struct fb_fix_screeninfo macfb_fix = { |
167 | .id = "Macintosh ", | ||
168 | .type = FB_TYPE_PACKED_PIXELS, | 167 | .type = FB_TYPE_PACKED_PIXELS, |
169 | .accel = FB_ACCEL_NONE, | 168 | .accel = FB_ACCEL_NONE, |
170 | }; | 169 | }; |
@@ -760,22 +759,22 @@ static int __init macfb_init(void) | |||
760 | 759 | ||
761 | switch(ndev->dr_hw) { | 760 | switch(ndev->dr_hw) { |
762 | case NUBUS_DRHW_APPLE_MDC: | 761 | case NUBUS_DRHW_APPLE_MDC: |
763 | strcat( macfb_fix.id, "Display Card" ); | 762 | strcpy(macfb_fix.id, "Mac Disp. Card"); |
764 | macfb_setpalette = mdc_setpalette; | 763 | macfb_setpalette = mdc_setpalette; |
765 | macfb_defined.activate = FB_ACTIVATE_NOW; | 764 | macfb_defined.activate = FB_ACTIVATE_NOW; |
766 | break; | 765 | break; |
767 | case NUBUS_DRHW_APPLE_TFB: | 766 | case NUBUS_DRHW_APPLE_TFB: |
768 | strcat( macfb_fix.id, "Toby" ); | 767 | strcpy(macfb_fix.id, "Toby"); |
769 | macfb_setpalette = toby_setpalette; | 768 | macfb_setpalette = toby_setpalette; |
770 | macfb_defined.activate = FB_ACTIVATE_NOW; | 769 | macfb_defined.activate = FB_ACTIVATE_NOW; |
771 | break; | 770 | break; |
772 | case NUBUS_DRHW_APPLE_JET: | 771 | case NUBUS_DRHW_APPLE_JET: |
773 | strcat( macfb_fix.id, "Jet"); | 772 | strcpy(macfb_fix.id, "Jet"); |
774 | macfb_setpalette = jet_setpalette; | 773 | macfb_setpalette = jet_setpalette; |
775 | macfb_defined.activate = FB_ACTIVATE_NOW; | 774 | macfb_defined.activate = FB_ACTIVATE_NOW; |
776 | break; | 775 | break; |
777 | default: | 776 | default: |
778 | strcat( macfb_fix.id, "Generic NuBus" ); | 777 | strcpy(macfb_fix.id, "Generic NuBus"); |
779 | break; | 778 | break; |
780 | } | 779 | } |
781 | } | 780 | } |
@@ -786,21 +785,11 @@ static int __init macfb_init(void) | |||
786 | if (!video_is_nubus) | 785 | if (!video_is_nubus) |
787 | switch( mac_bi_data.id ) | 786 | switch( mac_bi_data.id ) |
788 | { | 787 | { |
789 | /* These don't have onboard video. Eventually, we may | ||
790 | be able to write separate framebuffer drivers for | ||
791 | them (tobyfb.c, hiresfb.c, etc, etc) */ | ||
792 | case MAC_MODEL_II: | ||
793 | case MAC_MODEL_IIX: | ||
794 | case MAC_MODEL_IICX: | ||
795 | case MAC_MODEL_IIFX: | ||
796 | strcat( macfb_fix.id, "Generic NuBus" ); | ||
797 | break; | ||
798 | |||
799 | /* Valkyrie Quadras */ | 788 | /* Valkyrie Quadras */ |
800 | case MAC_MODEL_Q630: | 789 | case MAC_MODEL_Q630: |
801 | /* I'm not sure about this one */ | 790 | /* I'm not sure about this one */ |
802 | case MAC_MODEL_P588: | 791 | case MAC_MODEL_P588: |
803 | strcat( macfb_fix.id, "Valkyrie built-in" ); | 792 | strcpy(macfb_fix.id, "Valkyrie"); |
804 | macfb_setpalette = valkyrie_setpalette; | 793 | macfb_setpalette = valkyrie_setpalette; |
805 | macfb_defined.activate = FB_ACTIVATE_NOW; | 794 | macfb_defined.activate = FB_ACTIVATE_NOW; |
806 | valkyrie_cmap_regs = ioremap(DAC_BASE, 0x1000); | 795 | valkyrie_cmap_regs = ioremap(DAC_BASE, 0x1000); |
@@ -823,7 +812,7 @@ static int __init macfb_init(void) | |||
823 | case MAC_MODEL_Q700: | 812 | case MAC_MODEL_Q700: |
824 | case MAC_MODEL_Q900: | 813 | case MAC_MODEL_Q900: |
825 | case MAC_MODEL_Q950: | 814 | case MAC_MODEL_Q950: |
826 | strcat( macfb_fix.id, "DAFB built-in" ); | 815 | strcpy(macfb_fix.id, "DAFB"); |
827 | macfb_setpalette = dafb_setpalette; | 816 | macfb_setpalette = dafb_setpalette; |
828 | macfb_defined.activate = FB_ACTIVATE_NOW; | 817 | macfb_defined.activate = FB_ACTIVATE_NOW; |
829 | dafb_cmap_regs = ioremap(DAFB_BASE, 0x1000); | 818 | dafb_cmap_regs = ioremap(DAFB_BASE, 0x1000); |
@@ -831,7 +820,7 @@ static int __init macfb_init(void) | |||
831 | 820 | ||
832 | /* LC II uses the V8 framebuffer */ | 821 | /* LC II uses the V8 framebuffer */ |
833 | case MAC_MODEL_LCII: | 822 | case MAC_MODEL_LCII: |
834 | strcat( macfb_fix.id, "V8 built-in" ); | 823 | strcpy(macfb_fix.id, "V8"); |
835 | macfb_setpalette = v8_brazil_setpalette; | 824 | macfb_setpalette = v8_brazil_setpalette; |
836 | macfb_defined.activate = FB_ACTIVATE_NOW; | 825 | macfb_defined.activate = FB_ACTIVATE_NOW; |
837 | v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); | 826 | v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); |
@@ -843,7 +832,7 @@ static int __init macfb_init(void) | |||
843 | case MAC_MODEL_IIVI: | 832 | case MAC_MODEL_IIVI: |
844 | case MAC_MODEL_IIVX: | 833 | case MAC_MODEL_IIVX: |
845 | case MAC_MODEL_P600: | 834 | case MAC_MODEL_P600: |
846 | strcat( macfb_fix.id, "Brazil built-in" ); | 835 | strcpy(macfb_fix.id, "Brazil"); |
847 | macfb_setpalette = v8_brazil_setpalette; | 836 | macfb_setpalette = v8_brazil_setpalette; |
848 | macfb_defined.activate = FB_ACTIVATE_NOW; | 837 | macfb_defined.activate = FB_ACTIVATE_NOW; |
849 | v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); | 838 | v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); |
@@ -860,7 +849,7 @@ static int __init macfb_init(void) | |||
860 | case MAC_MODEL_P460: | 849 | case MAC_MODEL_P460: |
861 | macfb_setpalette = v8_brazil_setpalette; | 850 | macfb_setpalette = v8_brazil_setpalette; |
862 | macfb_defined.activate = FB_ACTIVATE_NOW; | 851 | macfb_defined.activate = FB_ACTIVATE_NOW; |
863 | strcat( macfb_fix.id, "Sonora built-in" ); | 852 | strcpy(macfb_fix.id, "Sonora"); |
864 | v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); | 853 | v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); |
865 | break; | 854 | break; |
866 | 855 | ||
@@ -871,7 +860,7 @@ static int __init macfb_init(void) | |||
871 | case MAC_MODEL_IISI: | 860 | case MAC_MODEL_IISI: |
872 | macfb_setpalette = rbv_setpalette; | 861 | macfb_setpalette = rbv_setpalette; |
873 | macfb_defined.activate = FB_ACTIVATE_NOW; | 862 | macfb_defined.activate = FB_ACTIVATE_NOW; |
874 | strcat( macfb_fix.id, "RBV built-in" ); | 863 | strcpy(macfb_fix.id, "RBV"); |
875 | rbv_cmap_regs = ioremap(DAC_BASE, 0x1000); | 864 | rbv_cmap_regs = ioremap(DAC_BASE, 0x1000); |
876 | break; | 865 | break; |
877 | 866 | ||
@@ -880,7 +869,7 @@ static int __init macfb_init(void) | |||
880 | case MAC_MODEL_C660: | 869 | case MAC_MODEL_C660: |
881 | macfb_setpalette = civic_setpalette; | 870 | macfb_setpalette = civic_setpalette; |
882 | macfb_defined.activate = FB_ACTIVATE_NOW; | 871 | macfb_defined.activate = FB_ACTIVATE_NOW; |
883 | strcat( macfb_fix.id, "Civic built-in" ); | 872 | strcpy(macfb_fix.id, "Civic"); |
884 | civic_cmap_regs = ioremap(CIVIC_BASE, 0x1000); | 873 | civic_cmap_regs = ioremap(CIVIC_BASE, 0x1000); |
885 | break; | 874 | break; |
886 | 875 | ||
@@ -901,7 +890,7 @@ static int __init macfb_init(void) | |||
901 | v8_brazil_cmap_regs = | 890 | v8_brazil_cmap_regs = |
902 | ioremap(DAC_BASE, 0x1000); | 891 | ioremap(DAC_BASE, 0x1000); |
903 | } | 892 | } |
904 | strcat( macfb_fix.id, "LC built-in" ); | 893 | strcpy(macfb_fix.id, "LC"); |
905 | break; | 894 | break; |
906 | /* We think this may be like the LC II */ | 895 | /* We think this may be like the LC II */ |
907 | case MAC_MODEL_CCL: | 896 | case MAC_MODEL_CCL: |
@@ -911,18 +900,18 @@ static int __init macfb_init(void) | |||
911 | v8_brazil_cmap_regs = | 900 | v8_brazil_cmap_regs = |
912 | ioremap(DAC_BASE, 0x1000); | 901 | ioremap(DAC_BASE, 0x1000); |
913 | } | 902 | } |
914 | strcat( macfb_fix.id, "Color Classic built-in" ); | 903 | strcpy(macfb_fix.id, "Color Classic"); |
915 | break; | 904 | break; |
916 | 905 | ||
917 | /* And we *do* mean "weirdos" */ | 906 | /* And we *do* mean "weirdos" */ |
918 | case MAC_MODEL_TV: | 907 | case MAC_MODEL_TV: |
919 | strcat( macfb_fix.id, "Mac TV built-in" ); | 908 | strcpy(macfb_fix.id, "Mac TV"); |
920 | break; | 909 | break; |
921 | 910 | ||
922 | /* These don't have colour, so no need to worry */ | 911 | /* These don't have colour, so no need to worry */ |
923 | case MAC_MODEL_SE30: | 912 | case MAC_MODEL_SE30: |
924 | case MAC_MODEL_CLII: | 913 | case MAC_MODEL_CLII: |
925 | strcat( macfb_fix.id, "Monochrome built-in" ); | 914 | strcpy(macfb_fix.id, "Monochrome"); |
926 | break; | 915 | break; |
927 | 916 | ||
928 | /* Powerbooks are particularly difficult. Many of | 917 | /* Powerbooks are particularly difficult. Many of |
@@ -935,7 +924,7 @@ static int __init macfb_init(void) | |||
935 | case MAC_MODEL_PB140: | 924 | case MAC_MODEL_PB140: |
936 | case MAC_MODEL_PB145: | 925 | case MAC_MODEL_PB145: |
937 | case MAC_MODEL_PB170: | 926 | case MAC_MODEL_PB170: |
938 | strcat( macfb_fix.id, "DDC built-in" ); | 927 | strcpy(macfb_fix.id, "DDC"); |
939 | break; | 928 | break; |
940 | 929 | ||
941 | /* Internal is GSC, External (if present) is ViSC */ | 930 | /* Internal is GSC, External (if present) is ViSC */ |
@@ -945,13 +934,13 @@ static int __init macfb_init(void) | |||
945 | case MAC_MODEL_PB180: | 934 | case MAC_MODEL_PB180: |
946 | case MAC_MODEL_PB210: | 935 | case MAC_MODEL_PB210: |
947 | case MAC_MODEL_PB230: | 936 | case MAC_MODEL_PB230: |
948 | strcat( macfb_fix.id, "GSC built-in" ); | 937 | strcpy(macfb_fix.id, "GSC"); |
949 | break; | 938 | break; |
950 | 939 | ||
951 | /* Internal is TIM, External is ViSC */ | 940 | /* Internal is TIM, External is ViSC */ |
952 | case MAC_MODEL_PB165C: | 941 | case MAC_MODEL_PB165C: |
953 | case MAC_MODEL_PB180C: | 942 | case MAC_MODEL_PB180C: |
954 | strcat( macfb_fix.id, "TIM built-in" ); | 943 | strcpy(macfb_fix.id, "TIM"); |
955 | break; | 944 | break; |
956 | 945 | ||
957 | /* Internal is CSC, External is Keystone+Ariel. */ | 946 | /* Internal is CSC, External is Keystone+Ariel. */ |
@@ -963,12 +952,12 @@ static int __init macfb_init(void) | |||
963 | case MAC_MODEL_PB280C: | 952 | case MAC_MODEL_PB280C: |
964 | macfb_setpalette = csc_setpalette; | 953 | macfb_setpalette = csc_setpalette; |
965 | macfb_defined.activate = FB_ACTIVATE_NOW; | 954 | macfb_defined.activate = FB_ACTIVATE_NOW; |
966 | strcat( macfb_fix.id, "CSC built-in" ); | 955 | strcpy(macfb_fix.id, "CSC"); |
967 | csc_cmap_regs = ioremap(CSC_BASE, 0x1000); | 956 | csc_cmap_regs = ioremap(CSC_BASE, 0x1000); |
968 | break; | 957 | break; |
969 | 958 | ||
970 | default: | 959 | default: |
971 | strcat( macfb_fix.id, "Unknown/Unsupported built-in" ); | 960 | strcpy(macfb_fix.id, "Unknown"); |
972 | break; | 961 | break; |
973 | } | 962 | } |
974 | 963 | ||
@@ -978,16 +967,23 @@ static int __init macfb_init(void) | |||
978 | fb_info.pseudo_palette = pseudo_palette; | 967 | fb_info.pseudo_palette = pseudo_palette; |
979 | fb_info.flags = FBINFO_DEFAULT; | 968 | fb_info.flags = FBINFO_DEFAULT; |
980 | 969 | ||
981 | fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0); | 970 | err = fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0); |
971 | if (err) | ||
972 | goto fail_unmap; | ||
982 | 973 | ||
983 | err = register_framebuffer(&fb_info); | 974 | err = register_framebuffer(&fb_info); |
984 | if (!err) | 975 | if (err) |
985 | printk("fb%d: %s frame buffer device\n", | 976 | goto fail_dealloc; |
986 | fb_info.node, fb_info.fix.id); | 977 | |
987 | else { | 978 | printk("fb%d: %s frame buffer device\n", |
988 | iounmap(fb_info.screen_base); | 979 | fb_info.node, fb_info.fix.id); |
989 | iounmap_macfb(); | 980 | return 0; |
990 | } | 981 | |
982 | fail_dealloc: | ||
983 | fb_dealloc_cmap(&fb_info.cmap); | ||
984 | fail_unmap: | ||
985 | iounmap(fb_info.screen_base); | ||
986 | iounmap_macfb(); | ||
991 | return err; | 987 | return err; |
992 | } | 988 | } |
993 | 989 | ||
diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c index 38718d95fbb9..fb64234a3825 100644 --- a/drivers/video/mb862xx/mb862xxfb.c +++ b/drivers/video/mb862xx/mb862xxfb.c | |||
@@ -927,9 +927,9 @@ static int __devinit mb862xx_pci_probe(struct pci_dev *pdev, | |||
927 | } | 927 | } |
928 | 928 | ||
929 | dev_dbg(dev, "fb phys 0x%llx 0x%lx\n", | 929 | dev_dbg(dev, "fb phys 0x%llx 0x%lx\n", |
930 | (u64)par->fb_base_phys, (ulong)par->mapped_vram); | 930 | (unsigned long long)par->fb_base_phys, (ulong)par->mapped_vram); |
931 | dev_dbg(dev, "mmio phys 0x%llx 0x%lx\n", | 931 | dev_dbg(dev, "mmio phys 0x%llx 0x%lx\n", |
932 | (u64)par->mmio_base_phys, (ulong)par->mmio_len); | 932 | (unsigned long long)par->mmio_base_phys, (ulong)par->mmio_len); |
933 | 933 | ||
934 | if (mb862xx_pci_gdc_init(par)) | 934 | if (mb862xx_pci_gdc_init(par)) |
935 | goto io_unmap; | 935 | goto io_unmap; |
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 5a5e407dc45f..1a49519dafa4 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c | |||
@@ -392,7 +392,7 @@ static void set_fb_fix(struct fb_info *fbi) | |||
392 | int bpp; | 392 | int bpp; |
393 | 393 | ||
394 | rg = &plane->fbdev->mem_desc.region[plane->idx]; | 394 | rg = &plane->fbdev->mem_desc.region[plane->idx]; |
395 | fbi->screen_base = (char __iomem *)rg->vaddr; | 395 | fbi->screen_base = rg->vaddr; |
396 | fix->smem_start = rg->paddr; | 396 | fix->smem_start = rg->paddr; |
397 | fix->smem_len = rg->size; | 397 | fix->smem_len = rg->size; |
398 | 398 | ||
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index a3765e0be4a8..763c1ea5dce5 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c | |||
@@ -40,6 +40,7 @@ | |||
40 | #include <linux/bootmem.h> | 40 | #include <linux/bootmem.h> |
41 | #include <linux/slab.h> | 41 | #include <linux/slab.h> |
42 | #include <asm/desc.h> | 42 | #include <asm/desc.h> |
43 | #include <asm/cacheflush.h> | ||
43 | 44 | ||
44 | #define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */ | 45 | #define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */ |
45 | #define CRU_BIOS_SIGNATURE_VALUE 0x55524324 | 46 | #define CRU_BIOS_SIGNATURE_VALUE 0x55524324 |
@@ -394,6 +395,8 @@ static void __devinit dmi_find_cru(const struct dmi_header *dm) | |||
394 | smbios_cru64_ptr->double_offset; | 395 | smbios_cru64_ptr->double_offset; |
395 | cru_rom_addr = ioremap(cru_physical_address, | 396 | cru_rom_addr = ioremap(cru_physical_address, |
396 | smbios_cru64_ptr->double_length); | 397 | smbios_cru64_ptr->double_length); |
398 | set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK, | ||
399 | smbios_cru64_ptr->double_length >> PAGE_SHIFT); | ||
397 | } | 400 | } |
398 | } | 401 | } |
399 | } | 402 | } |
@@ -482,7 +485,7 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, | |||
482 | "Management Log for details.\n"); | 485 | "Management Log for details.\n"); |
483 | } | 486 | } |
484 | 487 | ||
485 | return NOTIFY_STOP; | 488 | return NOTIFY_OK; |
486 | } | 489 | } |
487 | 490 | ||
488 | /* | 491 | /* |
diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index ca344a85eb95..2474ebca88f6 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c | |||
@@ -1,7 +1,7 @@ | |||
1 | /* | 1 | /* |
2 | * intel TCO vendor specific watchdog driver support | 2 | * intel TCO vendor specific watchdog driver support |
3 | * | 3 | * |
4 | * (c) Copyright 2006 Wim Van Sebroeck <wim@iguana.be>. | 4 | * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>. |
5 | * | 5 | * |
6 | * This program is free software; you can redistribute it and/or | 6 | * This program is free software; you can redistribute it and/or |
7 | * modify it under the terms of the GNU General Public License | 7 | * modify it under the terms of the GNU General Public License |
@@ -19,8 +19,7 @@ | |||
19 | 19 | ||
20 | /* Module and version information */ | 20 | /* Module and version information */ |
21 | #define DRV_NAME "iTCO_vendor_support" | 21 | #define DRV_NAME "iTCO_vendor_support" |
22 | #define DRV_VERSION "1.01" | 22 | #define DRV_VERSION "1.02" |
23 | #define DRV_RELDATE "11-Nov-2006" | ||
24 | #define PFX DRV_NAME ": " | 23 | #define PFX DRV_NAME ": " |
25 | 24 | ||
26 | /* Includes */ | 25 | /* Includes */ |
@@ -78,24 +77,6 @@ MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (n | |||
78 | * 20.6 seconds. | 77 | * 20.6 seconds. |
79 | */ | 78 | */ |
80 | 79 | ||
81 | static void supermicro_old_pre_start(unsigned long acpibase) | ||
82 | { | ||
83 | unsigned long val32; | ||
84 | |||
85 | val32 = inl(SMI_EN); | ||
86 | val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ | ||
87 | outl(val32, SMI_EN); /* Needed to activate watchdog */ | ||
88 | } | ||
89 | |||
90 | static void supermicro_old_pre_stop(unsigned long acpibase) | ||
91 | { | ||
92 | unsigned long val32; | ||
93 | |||
94 | val32 = inl(SMI_EN); | ||
95 | val32 &= 0x00002000; /* Turn on SMI clearing watchdog */ | ||
96 | outl(val32, SMI_EN); /* Needed to deactivate watchdog */ | ||
97 | } | ||
98 | |||
99 | static void supermicro_old_pre_keepalive(unsigned long acpibase) | 80 | static void supermicro_old_pre_keepalive(unsigned long acpibase) |
100 | { | 81 | { |
101 | /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */ | 82 | /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */ |
@@ -247,18 +228,14 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat) | |||
247 | void iTCO_vendor_pre_start(unsigned long acpibase, | 228 | void iTCO_vendor_pre_start(unsigned long acpibase, |
248 | unsigned int heartbeat) | 229 | unsigned int heartbeat) |
249 | { | 230 | { |
250 | if (vendorsupport == SUPERMICRO_OLD_BOARD) | 231 | if (vendorsupport == SUPERMICRO_NEW_BOARD) |
251 | supermicro_old_pre_start(acpibase); | ||
252 | else if (vendorsupport == SUPERMICRO_NEW_BOARD) | ||
253 | supermicro_new_pre_start(heartbeat); | 232 | supermicro_new_pre_start(heartbeat); |
254 | } | 233 | } |
255 | EXPORT_SYMBOL(iTCO_vendor_pre_start); | 234 | EXPORT_SYMBOL(iTCO_vendor_pre_start); |
256 | 235 | ||
257 | void iTCO_vendor_pre_stop(unsigned long acpibase) | 236 | void iTCO_vendor_pre_stop(unsigned long acpibase) |
258 | { | 237 | { |
259 | if (vendorsupport == SUPERMICRO_OLD_BOARD) | 238 | if (vendorsupport == SUPERMICRO_NEW_BOARD) |
260 | supermicro_old_pre_stop(acpibase); | ||
261 | else if (vendorsupport == SUPERMICRO_NEW_BOARD) | ||
262 | supermicro_new_pre_stop(); | 239 | supermicro_new_pre_stop(); |
263 | } | 240 | } |
264 | EXPORT_SYMBOL(iTCO_vendor_pre_stop); | 241 | EXPORT_SYMBOL(iTCO_vendor_pre_stop); |
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index bfb93bc2ca9f..5b395a4ddfdf 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c | |||
@@ -1,7 +1,7 @@ | |||
1 | /* | 1 | /* |
2 | * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets) | 2 | * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets) |
3 | * | 3 | * |
4 | * (c) Copyright 2006-2007 Wim Van Sebroeck <wim@iguana.be>. | 4 | * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>. |
5 | * | 5 | * |
6 | * This program is free software; you can redistribute it and/or | 6 | * This program is free software; you can redistribute it and/or |
7 | * modify it under the terms of the GNU General Public License | 7 | * modify it under the terms of the GNU General Public License |
@@ -20,34 +20,41 @@ | |||
20 | * 82801BAM (ICH2-M) : document number 290687-002, 298242-027, | 20 | * 82801BAM (ICH2-M) : document number 290687-002, 298242-027, |
21 | * 82801CA (ICH3-S) : document number 290733-003, 290739-013, | 21 | * 82801CA (ICH3-S) : document number 290733-003, 290739-013, |
22 | * 82801CAM (ICH3-M) : document number 290716-001, 290718-007, | 22 | * 82801CAM (ICH3-M) : document number 290716-001, 290718-007, |
23 | * 82801DB (ICH4) : document number 290744-001, 290745-020, | 23 | * 82801DB (ICH4) : document number 290744-001, 290745-025, |
24 | * 82801DBM (ICH4-M) : document number 252337-001, 252663-005, | 24 | * 82801DBM (ICH4-M) : document number 252337-001, 252663-008, |
25 | * 82801E (C-ICH) : document number 273599-001, 273645-002, | 25 | * 82801E (C-ICH) : document number 273599-001, 273645-002, |
26 | * 82801EB (ICH5) : document number 252516-001, 252517-003, | 26 | * 82801EB (ICH5) : document number 252516-001, 252517-028, |
27 | * 82801ER (ICH5R) : document number 252516-001, 252517-003, | 27 | * 82801ER (ICH5R) : document number 252516-001, 252517-028, |
28 | * 82801FB (ICH6) : document number 301473-002, 301474-007, | 28 | * 6300ESB (6300ESB) : document number 300641-004, 300884-013, |
29 | * 82801FR (ICH6R) : document number 301473-002, 301474-007, | 29 | * 82801FB (ICH6) : document number 301473-002, 301474-026, |
30 | * 82801FBM (ICH6-M) : document number 301473-002, 301474-007, | 30 | * 82801FR (ICH6R) : document number 301473-002, 301474-026, |
31 | * 82801FW (ICH6W) : document number 301473-001, 301474-007, | 31 | * 82801FBM (ICH6-M) : document number 301473-002, 301474-026, |
32 | * 82801FRW (ICH6RW) : document number 301473-001, 301474-007, | 32 | * 82801FW (ICH6W) : document number 301473-001, 301474-026, |
33 | * 82801GB (ICH7) : document number 307013-002, 307014-009, | 33 | * 82801FRW (ICH6RW) : document number 301473-001, 301474-026, |
34 | * 82801GR (ICH7R) : document number 307013-002, 307014-009, | 34 | * 631xESB (631xESB) : document number 313082-001, 313075-006, |
35 | * 82801GDH (ICH7DH) : document number 307013-002, 307014-009, | 35 | * 632xESB (632xESB) : document number 313082-001, 313075-006, |
36 | * 82801GBM (ICH7-M) : document number 307013-002, 307014-009, | 36 | * 82801GB (ICH7) : document number 307013-003, 307014-024, |
37 | * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009, | 37 | * 82801GR (ICH7R) : document number 307013-003, 307014-024, |
38 | * 82801HB (ICH8) : document number 313056-003, 313057-009, | 38 | * 82801GDH (ICH7DH) : document number 307013-003, 307014-024, |
39 | * 82801HR (ICH8R) : document number 313056-003, 313057-009, | 39 | * 82801GBM (ICH7-M) : document number 307013-003, 307014-024, |
40 | * 82801HBM (ICH8M) : document number 313056-003, 313057-009, | 40 | * 82801GHM (ICH7-M DH) : document number 307013-003, 307014-024, |
41 | * 82801HH (ICH8DH) : document number 313056-003, 313057-009, | 41 | * 82801GU (ICH7-U) : document number 307013-003, 307014-024, |
42 | * 82801HO (ICH8DO) : document number 313056-003, 313057-009, | 42 | * 82801HB (ICH8) : document number 313056-003, 313057-017, |
43 | * 82801HEM (ICH8M-E) : document number 313056-003, 313057-009, | 43 | * 82801HR (ICH8R) : document number 313056-003, 313057-017, |
44 | * 82801IB (ICH9) : document number 316972-001, 316973-006, | 44 | * 82801HBM (ICH8M) : document number 313056-003, 313057-017, |
45 | * 82801IR (ICH9R) : document number 316972-001, 316973-006, | 45 | * 82801HH (ICH8DH) : document number 313056-003, 313057-017, |
46 | * 82801IH (ICH9DH) : document number 316972-001, 316973-006, | 46 | * 82801HO (ICH8DO) : document number 313056-003, 313057-017, |
47 | * 82801IO (ICH9DO) : document number 316972-001, 316973-006, | 47 | * 82801HEM (ICH8M-E) : document number 313056-003, 313057-017, |
48 | * 6300ESB (6300ESB) : document number 300641-003, 300884-010, | 48 | * 82801IB (ICH9) : document number 316972-004, 316973-012, |
49 | * 631xESB (631xESB) : document number 313082-001, 313075-005, | 49 | * 82801IR (ICH9R) : document number 316972-004, 316973-012, |
50 | * 632xESB (632xESB) : document number 313082-001, 313075-005 | 50 | * 82801IH (ICH9DH) : document number 316972-004, 316973-012, |
51 | * 82801IO (ICH9DO) : document number 316972-004, 316973-012, | ||
52 | * 82801IBM (ICH9M) : document number 316972-004, 316973-012, | ||
53 | * 82801IEM (ICH9M-E) : document number 316972-004, 316973-012, | ||
54 | * 82801JIB (ICH10) : document number 319973-002, 319974-002, | ||
55 | * 82801JIR (ICH10R) : document number 319973-002, 319974-002, | ||
56 | * 82801JD (ICH10D) : document number 319973-002, 319974-002, | ||
57 | * 82801JDO (ICH10DO) : document number 319973-002, 319974-002 | ||
51 | */ | 58 | */ |
52 | 59 | ||
53 | /* | 60 | /* |
@@ -56,8 +63,7 @@ | |||
56 | 63 | ||
57 | /* Module and version information */ | 64 | /* Module and version information */ |
58 | #define DRV_NAME "iTCO_wdt" | 65 | #define DRV_NAME "iTCO_wdt" |
59 | #define DRV_VERSION "1.03" | 66 | #define DRV_VERSION "1.04" |
60 | #define DRV_RELDATE "30-Apr-2008" | ||
61 | #define PFX DRV_NAME ": " | 67 | #define PFX DRV_NAME ": " |
62 | 68 | ||
63 | /* Includes */ | 69 | /* Includes */ |
@@ -96,19 +102,26 @@ enum iTCO_chipsets { | |||
96 | TCO_ICH6, /* ICH6 & ICH6R */ | 102 | TCO_ICH6, /* ICH6 & ICH6R */ |
97 | TCO_ICH6M, /* ICH6-M */ | 103 | TCO_ICH6M, /* ICH6-M */ |
98 | TCO_ICH6W, /* ICH6W & ICH6RW */ | 104 | TCO_ICH6W, /* ICH6W & ICH6RW */ |
105 | TCO_631XESB, /* 631xESB/632xESB */ | ||
99 | TCO_ICH7, /* ICH7 & ICH7R */ | 106 | TCO_ICH7, /* ICH7 & ICH7R */ |
100 | TCO_ICH7M, /* ICH7-M */ | 107 | TCO_ICH7DH, /* ICH7DH */ |
108 | TCO_ICH7M, /* ICH7-M & ICH7-U */ | ||
101 | TCO_ICH7MDH, /* ICH7-M DH */ | 109 | TCO_ICH7MDH, /* ICH7-M DH */ |
102 | TCO_ICH8, /* ICH8 & ICH8R */ | 110 | TCO_ICH8, /* ICH8 & ICH8R */ |
103 | TCO_ICH8ME, /* ICH8M-E */ | ||
104 | TCO_ICH8DH, /* ICH8DH */ | 111 | TCO_ICH8DH, /* ICH8DH */ |
105 | TCO_ICH8DO, /* ICH8DO */ | 112 | TCO_ICH8DO, /* ICH8DO */ |
106 | TCO_ICH8M, /* ICH8M */ | 113 | TCO_ICH8M, /* ICH8M */ |
114 | TCO_ICH8ME, /* ICH8M-E */ | ||
107 | TCO_ICH9, /* ICH9 */ | 115 | TCO_ICH9, /* ICH9 */ |
108 | TCO_ICH9R, /* ICH9R */ | 116 | TCO_ICH9R, /* ICH9R */ |
109 | TCO_ICH9DH, /* ICH9DH */ | 117 | TCO_ICH9DH, /* ICH9DH */ |
110 | TCO_ICH9DO, /* ICH9DO */ | 118 | TCO_ICH9DO, /* ICH9DO */ |
111 | TCO_631XESB, /* 631xESB/632xESB */ | 119 | TCO_ICH9M, /* ICH9M */ |
120 | TCO_ICH9ME, /* ICH9M-E */ | ||
121 | TCO_ICH10, /* ICH10 */ | ||
122 | TCO_ICH10R, /* ICH10R */ | ||
123 | TCO_ICH10D, /* ICH10D */ | ||
124 | TCO_ICH10DO, /* ICH10DO */ | ||
112 | }; | 125 | }; |
113 | 126 | ||
114 | static struct { | 127 | static struct { |
@@ -129,19 +142,26 @@ static struct { | |||
129 | {"ICH6 or ICH6R", 2}, | 142 | {"ICH6 or ICH6R", 2}, |
130 | {"ICH6-M", 2}, | 143 | {"ICH6-M", 2}, |
131 | {"ICH6W or ICH6RW", 2}, | 144 | {"ICH6W or ICH6RW", 2}, |
145 | {"631xESB/632xESB", 2}, | ||
132 | {"ICH7 or ICH7R", 2}, | 146 | {"ICH7 or ICH7R", 2}, |
133 | {"ICH7-M", 2}, | 147 | {"ICH7DH", 2}, |
148 | {"ICH7-M or ICH7-U", 2}, | ||
134 | {"ICH7-M DH", 2}, | 149 | {"ICH7-M DH", 2}, |
135 | {"ICH8 or ICH8R", 2}, | 150 | {"ICH8 or ICH8R", 2}, |
136 | {"ICH8M-E", 2}, | ||
137 | {"ICH8DH", 2}, | 151 | {"ICH8DH", 2}, |
138 | {"ICH8DO", 2}, | 152 | {"ICH8DO", 2}, |
139 | {"ICH8M", 2}, | 153 | {"ICH8M", 2}, |
154 | {"ICH8M-E", 2}, | ||
140 | {"ICH9", 2}, | 155 | {"ICH9", 2}, |
141 | {"ICH9R", 2}, | 156 | {"ICH9R", 2}, |
142 | {"ICH9DH", 2}, | 157 | {"ICH9DH", 2}, |
143 | {"ICH9DO", 2}, | 158 | {"ICH9DO", 2}, |
144 | {"631xESB/632xESB", 2}, | 159 | {"ICH9M", 2}, |
160 | {"ICH9M-E", 2}, | ||
161 | {"ICH10", 2}, | ||
162 | {"ICH10R", 2}, | ||
163 | {"ICH10D", 2}, | ||
164 | {"ICH10DO", 2}, | ||
145 | {NULL, 0} | 165 | {NULL, 0} |
146 | }; | 166 | }; |
147 | 167 | ||
@@ -175,18 +195,6 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { | |||
175 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6)}, | 195 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6)}, |
176 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M)}, | 196 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M)}, |
177 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W)}, | 197 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W)}, |
178 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7)}, | ||
179 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M)}, | ||
180 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)}, | ||
181 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8)}, | ||
182 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME)}, | ||
183 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH)}, | ||
184 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO)}, | ||
185 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M)}, | ||
186 | { ITCO_PCI_DEVICE(0x2918, TCO_ICH9)}, | ||
187 | { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R)}, | ||
188 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH)}, | ||
189 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO)}, | ||
190 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)}, | 198 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)}, |
191 | { ITCO_PCI_DEVICE(0x2671, TCO_631XESB)}, | 199 | { ITCO_PCI_DEVICE(0x2671, TCO_631XESB)}, |
192 | { ITCO_PCI_DEVICE(0x2672, TCO_631XESB)}, | 200 | { ITCO_PCI_DEVICE(0x2672, TCO_631XESB)}, |
@@ -203,6 +211,25 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { | |||
203 | { ITCO_PCI_DEVICE(0x267d, TCO_631XESB)}, | 211 | { ITCO_PCI_DEVICE(0x267d, TCO_631XESB)}, |
204 | { ITCO_PCI_DEVICE(0x267e, TCO_631XESB)}, | 212 | { ITCO_PCI_DEVICE(0x267e, TCO_631XESB)}, |
205 | { ITCO_PCI_DEVICE(0x267f, TCO_631XESB)}, | 213 | { ITCO_PCI_DEVICE(0x267f, TCO_631XESB)}, |
214 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7)}, | ||
215 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_30, TCO_ICH7DH)}, | ||
216 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M)}, | ||
217 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)}, | ||
218 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8)}, | ||
219 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH)}, | ||
220 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO)}, | ||
221 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M)}, | ||
222 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME)}, | ||
223 | { ITCO_PCI_DEVICE(0x2918, TCO_ICH9)}, | ||
224 | { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R)}, | ||
225 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH)}, | ||
226 | { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO)}, | ||
227 | { ITCO_PCI_DEVICE(0x2919, TCO_ICH9M)}, | ||
228 | { ITCO_PCI_DEVICE(0x2917, TCO_ICH9ME)}, | ||
229 | { ITCO_PCI_DEVICE(0x3a18, TCO_ICH10)}, | ||
230 | { ITCO_PCI_DEVICE(0x3a16, TCO_ICH10R)}, | ||
231 | { ITCO_PCI_DEVICE(0x3a1a, TCO_ICH10D)}, | ||
232 | { ITCO_PCI_DEVICE(0x3a14, TCO_ICH10DO)}, | ||
206 | { 0, }, /* End of list */ | 233 | { 0, }, /* End of list */ |
207 | }; | 234 | }; |
208 | MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); | 235 | MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); |
@@ -311,6 +338,7 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void) | |||
311 | static int iTCO_wdt_start(void) | 338 | static int iTCO_wdt_start(void) |
312 | { | 339 | { |
313 | unsigned int val; | 340 | unsigned int val; |
341 | unsigned long val32; | ||
314 | 342 | ||
315 | spin_lock(&iTCO_wdt_private.io_lock); | 343 | spin_lock(&iTCO_wdt_private.io_lock); |
316 | 344 | ||
@@ -323,6 +351,18 @@ static int iTCO_wdt_start(void) | |||
323 | return -EIO; | 351 | return -EIO; |
324 | } | 352 | } |
325 | 353 | ||
354 | /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ | ||
355 | val32 = inl(SMI_EN); | ||
356 | val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ | ||
357 | outl(val32, SMI_EN); | ||
358 | |||
359 | /* Force the timer to its reload value by writing to the TCO_RLD | ||
360 | register */ | ||
361 | if (iTCO_wdt_private.iTCO_version == 2) | ||
362 | outw(0x01, TCO_RLD); | ||
363 | else if (iTCO_wdt_private.iTCO_version == 1) | ||
364 | outb(0x01, TCO_RLD); | ||
365 | |||
326 | /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */ | 366 | /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */ |
327 | val = inw(TCO1_CNT); | 367 | val = inw(TCO1_CNT); |
328 | val &= 0xf7ff; | 368 | val &= 0xf7ff; |
@@ -338,6 +378,7 @@ static int iTCO_wdt_start(void) | |||
338 | static int iTCO_wdt_stop(void) | 378 | static int iTCO_wdt_stop(void) |
339 | { | 379 | { |
340 | unsigned int val; | 380 | unsigned int val; |
381 | unsigned long val32; | ||
341 | 382 | ||
342 | spin_lock(&iTCO_wdt_private.io_lock); | 383 | spin_lock(&iTCO_wdt_private.io_lock); |
343 | 384 | ||
@@ -349,6 +390,11 @@ static int iTCO_wdt_stop(void) | |||
349 | outw(val, TCO1_CNT); | 390 | outw(val, TCO1_CNT); |
350 | val = inw(TCO1_CNT); | 391 | val = inw(TCO1_CNT); |
351 | 392 | ||
393 | /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */ | ||
394 | val32 = inl(SMI_EN); | ||
395 | val32 |= 0x00002000; | ||
396 | outl(val32, SMI_EN); | ||
397 | |||
352 | /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ | 398 | /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ |
353 | iTCO_wdt_set_NO_REBOOT_bit(); | 399 | iTCO_wdt_set_NO_REBOOT_bit(); |
354 | 400 | ||
@@ -459,7 +505,6 @@ static int iTCO_wdt_open(struct inode *inode, struct file *file) | |||
459 | /* | 505 | /* |
460 | * Reload and activate timer | 506 | * Reload and activate timer |
461 | */ | 507 | */ |
462 | iTCO_wdt_keepalive(); | ||
463 | iTCO_wdt_start(); | 508 | iTCO_wdt_start(); |
464 | return nonseekable_open(inode, file); | 509 | return nonseekable_open(inode, file); |
465 | } | 510 | } |
@@ -604,7 +649,6 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, | |||
604 | int ret; | 649 | int ret; |
605 | u32 base_address; | 650 | u32 base_address; |
606 | unsigned long RCBA; | 651 | unsigned long RCBA; |
607 | unsigned long val32; | ||
608 | 652 | ||
609 | /* | 653 | /* |
610 | * Find the ACPI/PM base I/O address which is the base | 654 | * Find the ACPI/PM base I/O address which is the base |
@@ -644,17 +688,13 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, | |||
644 | /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ | 688 | /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ |
645 | iTCO_wdt_set_NO_REBOOT_bit(); | 689 | iTCO_wdt_set_NO_REBOOT_bit(); |
646 | 690 | ||
647 | /* Set the TCO_EN bit in SMI_EN register */ | 691 | /* The TCO logic uses the TCO_EN bit in the SMI_EN register */ |
648 | if (!request_region(SMI_EN, 4, "iTCO_wdt")) { | 692 | if (!request_region(SMI_EN, 4, "iTCO_wdt")) { |
649 | printk(KERN_ERR PFX | 693 | printk(KERN_ERR PFX |
650 | "I/O address 0x%04lx already in use\n", SMI_EN); | 694 | "I/O address 0x%04lx already in use\n", SMI_EN); |
651 | ret = -EIO; | 695 | ret = -EIO; |
652 | goto out; | 696 | goto out; |
653 | } | 697 | } |
654 | val32 = inl(SMI_EN); | ||
655 | val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ | ||
656 | outl(val32, SMI_EN); | ||
657 | release_region(SMI_EN, 4); | ||
658 | 698 | ||
659 | /* The TCO I/O registers reside in a 32-byte range pointed to | 699 | /* The TCO I/O registers reside in a 32-byte range pointed to |
660 | by the TCOBASE value */ | 700 | by the TCOBASE value */ |
@@ -662,7 +702,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, | |||
662 | printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", | 702 | printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", |
663 | TCOBASE); | 703 | TCOBASE); |
664 | ret = -EIO; | 704 | ret = -EIO; |
665 | goto out; | 705 | goto unreg_smi_en; |
666 | } | 706 | } |
667 | 707 | ||
668 | printk(KERN_INFO PFX | 708 | printk(KERN_INFO PFX |
@@ -672,8 +712,9 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, | |||
672 | TCOBASE); | 712 | TCOBASE); |
673 | 713 | ||
674 | /* Clear out the (probably old) status */ | 714 | /* Clear out the (probably old) status */ |
675 | outb(0, TCO1_STS); | 715 | outb(8, TCO1_STS); /* Clear the Time Out Status bit */ |
676 | outb(3, TCO2_STS); | 716 | outb(2, TCO2_STS); /* Clear SECOND_TO_STS bit */ |
717 | outb(4, TCO2_STS); /* Clear BOOT_STS bit */ | ||
677 | 718 | ||
678 | /* Make sure the watchdog is not running */ | 719 | /* Make sure the watchdog is not running */ |
679 | iTCO_wdt_stop(); | 720 | iTCO_wdt_stop(); |
@@ -701,6 +742,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, | |||
701 | 742 | ||
702 | unreg_region: | 743 | unreg_region: |
703 | release_region(TCOBASE, 0x20); | 744 | release_region(TCOBASE, 0x20); |
745 | unreg_smi_en: | ||
746 | release_region(SMI_EN, 4); | ||
704 | out: | 747 | out: |
705 | if (iTCO_wdt_private.iTCO_version == 2) | 748 | if (iTCO_wdt_private.iTCO_version == 2) |
706 | iounmap(iTCO_wdt_private.gcs); | 749 | iounmap(iTCO_wdt_private.gcs); |
@@ -718,6 +761,7 @@ static void __devexit iTCO_wdt_cleanup(void) | |||
718 | /* Deregister */ | 761 | /* Deregister */ |
719 | misc_deregister(&iTCO_wdt_miscdev); | 762 | misc_deregister(&iTCO_wdt_miscdev); |
720 | release_region(TCOBASE, 0x20); | 763 | release_region(TCOBASE, 0x20); |
764 | release_region(SMI_EN, 4); | ||
721 | if (iTCO_wdt_private.iTCO_version == 2) | 765 | if (iTCO_wdt_private.iTCO_version == 2) |
722 | iounmap(iTCO_wdt_private.gcs); | 766 | iounmap(iTCO_wdt_private.gcs); |
723 | pci_dev_put(iTCO_wdt_private.pdev); | 767 | pci_dev_put(iTCO_wdt_private.pdev); |
@@ -782,8 +826,8 @@ static int __init iTCO_wdt_init_module(void) | |||
782 | { | 826 | { |
783 | int err; | 827 | int err; |
784 | 828 | ||
785 | printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s (%s)\n", | 829 | printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s\n", |
786 | DRV_VERSION, DRV_RELDATE); | 830 | DRV_VERSION); |
787 | 831 | ||
788 | err = platform_driver_register(&iTCO_wdt_driver); | 832 | err = platform_driver_register(&iTCO_wdt_driver); |
789 | if (err) | 833 | if (err) |
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index b4b7b0a4c119..3acce623f209 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c | |||
@@ -98,6 +98,8 @@ static void mtx1_wdt_reset(void) | |||
98 | 98 | ||
99 | static void mtx1_wdt_start(void) | 99 | static void mtx1_wdt_start(void) |
100 | { | 100 | { |
101 | unsigned long flags; | ||
102 | |||
101 | spin_lock_irqsave(&mtx1_wdt_device.lock, flags); | 103 | spin_lock_irqsave(&mtx1_wdt_device.lock, flags); |
102 | if (!mtx1_wdt_device.queue) { | 104 | if (!mtx1_wdt_device.queue) { |
103 | mtx1_wdt_device.queue = 1; | 105 | mtx1_wdt_device.queue = 1; |
@@ -110,6 +112,8 @@ static void mtx1_wdt_start(void) | |||
110 | 112 | ||
111 | static int mtx1_wdt_stop(void) | 113 | static int mtx1_wdt_stop(void) |
112 | { | 114 | { |
115 | unsigned long flags; | ||
116 | |||
113 | spin_lock_irqsave(&mtx1_wdt_device.lock, flags); | 117 | spin_lock_irqsave(&mtx1_wdt_device.lock, flags); |
114 | if (mtx1_wdt_device.queue) { | 118 | if (mtx1_wdt_device.queue) { |
115 | mtx1_wdt_device.queue = 0; | 119 | mtx1_wdt_device.queue = 0; |