17 files changed, 19 insertions, 19 deletions

diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index 20ef1bf5e726..703959eba45a 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -270,7 +270,7 @@ static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode)
 
         if ((uninorth_rev >= 0x30) && (uninorth_rev <= 0x33)) {
                 /*
-                 * We need to to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1,
+                 * We need to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1,
                  * 2.2 and 2.3, Darwin do so.
                  */
                 if ((command >> AGPSTAT_RQ_DEPTH_SHIFT) > 7)
diff --git a/drivers/gpu/drm/mga/mga_state.c b/drivers/gpu/drm/mga/mga_state.c
index b710fab21cb3..a53b848e0f17 100644
--- a/drivers/gpu/drm/mga/mga_state.c
+++ b/drivers/gpu/drm/mga/mga_state.c
@@ -239,7 +239,7 @@ static __inline__ void mga_g200_emit_pipe(drm_mga_private_t * dev_priv)
                   MGA_WR34, 0x00000000,
                   MGA_WR42, 0x0000ffff, MGA_WR60, 0x0000ffff);
 
-        /* Padding required to to hardware bug.
+        /* Padding required due to hardware bug.
          */
         DMA_BLOCK(MGA_DMAPAD, 0xffffffff,
                   MGA_DMAPAD, 0xffffffff,
@@ -317,7 +317,7 @@ static __inline__ void mga_g400_emit_pipe(drm_mga_private_t * dev_priv)
                   MGA_WR52, MGA_G400_WR_MAGIC,  /* tex1 width        */
                   MGA_WR60, MGA_G400_WR_MAGIC); /* tex1 height       */
 
-        /* Padding required to to hardware bug */
+        /* Padding required due to hardware bug */
         DMA_BLOCK(MGA_DMAPAD, 0xffffffff,
                   MGA_DMAPAD, 0xffffffff,
                   MGA_DMAPAD, 0xffffffff,
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index a8d0aee3bc0e..8aaad65c3bb5 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -894,7 +894,7 @@ void guest_set_pte(struct lg_cpu *cpu,
  * tells us they've changed.  When the Guest tries to use the new entry it will
  * fault and demand_page() will fix it up.
  *
- * So with that in mind here's our code to to update a (top-level) PGD entry:
+ * So with that in mind here's our code to update a (top-level) PGD entry:
  */
 void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx)
 {
diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c
index 8a5bba16ff32..7f1e5415850b 100644
--- a/drivers/media/video/gspca/m5602/m5602_core.c
+++ b/drivers/media/video/gspca/m5602/m5602_core.c
@@ -56,7 +56,7 @@ int m5602_read_bridge(struct sd *sd, const u8 address, u8 *i2c_data)
         return (err < 0) ? err : 0;
 }
 
-/* Writes a byte to to the m5602 */
+/* Writes a byte to the m5602 */
 int m5602_write_bridge(struct sd *sd, const u8 address, const u8 i2c_data)
 {
         int err;
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index bc14bb1b0579..88671529c45d 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -512,7 +512,7 @@ static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat)
         }
 
         /* For the DMA case the DMA engine handles the data transfer
-         * automatically. For non DMA we have to to it ourselves.
+         * automatically. For non DMA we have to do it ourselves.
          * Don't do it in interrupt context though.
          */
         if (!mxcmci_use_dma(host) && host->data)
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index d4fb9a3ab4df..1bdf0ee6d0b6 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -184,7 +184,7 @@ static int ixp2000_flash_probe(struct platform_device *dev)
         info->map.bankwidth = 1;
 
         /*
-         * map_priv_2 is used to store a ptr to to the bank_setup routine
+         * map_priv_2 is used to store a ptr to the bank_setup routine
          */
         info->map.map_priv_2 = (unsigned long) ixp_data->bank_setup;
 
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index e4d9ef0c965a..9f87c99189a9 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -1065,7 +1065,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
         }
 
         /*
-         * Now we have got to calculate how much data we have to to copy. In
+         * Now we have got to calculate how much data we have to copy. In
          * case of a static volume it is fairly easy - the VID header contains
          * the data size. In case of a dynamic volume it is more difficult - we
          * have to read the contents, cut 0xFF bytes from the end and copy only
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 6a5fe9633783..47877942decc 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -570,7 +570,7 @@ void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol,
 
 /*
  * ubi_rb_for_each_entry - walk an RB-tree.
- * @rb: a pointer to type 'struct rb_node' to to use as a loop counter
+ * @rb: a pointer to type 'struct rb_node' to use as a loop counter
  * @pos: a pointer to RB-tree entry type to use as a loop counter
  * @root: RB-tree's root
  * @member: the name of the 'struct rb_node' within the RB-tree entry
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index cea5cfe23b71..c3fa31c9f2a7 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -1987,7 +1987,7 @@ void bond_3ad_unbind_slave(struct slave *slave)
                         // find new aggregator for the related port(s)
                         new_aggregator = __get_first_agg(port);
                         for (; new_aggregator; new_aggregator = __get_next_agg(new_aggregator)) {
-                                // if the new aggregator is empty, or it connected to to our port only
+                                // if the new aggregator is empty, or it is connected to our port only
                                 if (!new_aggregator->lag_ports || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator)) {
                                         break;
                                 }
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index cda6b397550d..45ac225a7aaa 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -3035,7 +3035,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
                 /* If TBI compatibility is was previously off, turn it on. For
                  * compatibility with a TBI link partner, we will store bad
                  * packets. Some frames have an additional byte on the end and
-                 * will look like CRC errors to to the hardware.
+                 * will look like CRC errors to the hardware.
                  */
                 if (!hw->tbi_compatibility_on) {
                     hw->tbi_compatibility_on = true;
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index 5e110a2328ae..4e79a9800134 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -368,7 +368,7 @@ error:
         return r;
 }
 
-/* MAC address: if custom mac addresses are to to be used CR_MAC_ADDR_P1 and
+/* MAC address: if custom mac addresses are to be used CR_MAC_ADDR_P1 and
  *              CR_MAC_ADDR_P2 must be overwritten
  */
 int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr)
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 7dc3d1894b1a..a39addc3a596 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -718,7 +718,7 @@ megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
  * megasas_build_ldio - Prepares IOs to logical devices
  * @instance:           Adapter soft state
  * @scp:                SCSI command
- * @cmd:                Command to to be prepared
+ * @cmd:                Command to be prepared
  *
  * Frames (and accompanying SGLs) for regular SCSI IOs use this function.
  */
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 40e3cafb3a9c..83c8b5e4fc8b 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -1422,7 +1422,7 @@ static void qla4xxx_slave_destroy(struct scsi_device *sdev)
 /**
  * qla4xxx_del_from_active_array - returns an active srb
  * @ha: Pointer to host adapter structure.
- * @index: index into to the active_array
+ * @index: index into the active_array
  *
  * This routine removes and returns the srb at the specified index
  **/
@@ -1500,7 +1500,7 @@ static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha)
 
 /**
  * qla4xxx_eh_wait_for_commands - wait for active cmds to finish.
- * @ha: pointer to to HBA
+ * @ha: pointer to HBA
  * @t: target id
  * @l: lun id
  *
diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h
index 3f498f6f3ff6..90fd40f24734 100644
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -2060,7 +2060,7 @@ typedef struct _STA_ADMIN_CONFIG {
     BOOLEAN             AdhocBGJoined;          // Indicate Adhoc B/G Join.
     BOOLEAN             Adhoc20NJoined;         // Indicate Adhoc 20MHz N Join.
 #endif
-        // New for WPA, windows want us to to keep association information and
+        // New for WPA, windows want us to keep association information and
         // Fixed IEs from last association response
         NDIS_802_11_ASSOCIATION_INFORMATION     AssocInfo;
         USHORT       ReqVarIELen;                // Length of next VIE include EID & Length
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index e772b01ac3ac..1fd360e04065 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -57,7 +57,7 @@
 #define UART_RI         0x10    /* ring indicator - modem - device to host */
 #define UART_CD         0x40    /* carrier detect - modem - device to host */
 #define CYP_ERROR       0x08    /* received from input report - device to host */
-/* Note - the below has nothing to to with the "feature report" reset */
+/* Note - the below has nothing to do with the "feature report" reset */
 #define CONTROL_RESET   0x08    /* sent with output report - host to device */
 
 /* End of RS-232 protocol definitions */
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index dc0f832657e6..b97960ac92f2 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2540,7 +2540,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor)
 
 /*****************************************************************************
  * send_cmd_write_uart_register
- *  this function builds up a uart register message and sends to to the device.
+ *  this function builds up a uart register message and sends to the device.
  *****************************************************************************/
 static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
                                                 __u8 regNum, __u8 regValue)
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index a61673133d7d..f7373371b137 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -38,7 +38,7 @@
  *   0.3a - implemented pools of write URBs
  *   0.3  - alpha version for public testing
  *   0.2  - TIOCMGET works, so autopilot(1) can be used!
- *   0.1  - can be used to to pilot-xfer -p /dev/ttyUSB0 -l
+ *   0.1  - can be used to do pilot-xfer -p /dev/ttyUSB0 -l
  *
  *   The driver skeleton is mainly based on mct_u232.c and various other
  *   pieces of code shamelessly copied from the drivers/usb/serial/ directory.