3 files changed, 23 insertions, 20 deletions

diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 538ec38ba995..6c77d68dbd05 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -14,6 +14,7 @@
  *      Look into engine reset on timeout errors. Should not be required.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -25,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_hpt366"
-#define DRV_VERSION     "0.6.10"
+#define DRV_VERSION     "0.6.11"
 
 struct hpt_clock {
         u8      xfer_mode;
@@ -160,8 +161,8 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
 
         while (list[i] != NULL) {
                 if (!strcmp(list[i], model_num)) {
-                        pr_warning(DRV_NAME ": %s is not supported for %s.\n",
-                                   modestr, list[i]);
+                        pr_warn("%s is not supported for %s\n",
+                                modestr, list[i]);
                         return 1;
                 }
                 i++;
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 4c5b5183225e..9620636aa405 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -14,6 +14,8 @@
  *      Look into engine reset on timeout errors. Should not be required.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -24,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_hpt37x"
-#define DRV_VERSION     "0.6.22"
+#define DRV_VERSION     "0.6.23"
 
 struct hpt_clock {
         u8      xfer_speed;
@@ -229,8 +231,8 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
 
         while (list[i] != NULL) {
                 if (!strcmp(list[i], model_num)) {
-                        pr_warning(DRV_NAME ": %s is not supported for %s.\n",
-                                   modestr, list[i]);
+                        pr_warn("%s is not supported for %s\n",
+                                modestr, list[i]);
                         return 1;
                 }
                 i++;
@@ -863,8 +865,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                         chip_table = &hpt372;
                         break;
                 default:
-                        pr_err(DRV_NAME ": Unknown HPT366 subtype, "
-                               "please report (%d).\n", rev);
+                        pr_err("Unknown HPT366 subtype, please report (%d)\n",
+                               rev);
                         return -ENODEV;
                 }
                 break;
@@ -904,8 +906,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                         *ppi = &info_hpt374_fn1;
                 break;
         default:
-                pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n",
-                       dev->device);
+                pr_err("PCI table is bogus, please report (%d)\n", dev->device);
                 return -ENODEV;
         }
         /* Ok so this is a chip we support */
@@ -953,7 +954,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 u8 sr;
                 u32 total = 0;
 
-                pr_warning(DRV_NAME ": BIOS has not set timing clocks.\n");
+                pr_warn("BIOS has not set timing clocks\n");
 
                 /* This is the process the HPT371 BIOS is reported to use */
                 for (i = 0; i < 128; i++) {
@@ -1009,7 +1010,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                                                (f_high << 16) | f_low | 0x100);
                 }
                 if (adjust == 8) {
-                        pr_err(DRV_NAME ": DPLL did not stabilize!\n");
+                        pr_err("DPLL did not stabilize!\n");
                         return -ENODEV;
                 }
                 if (dpll == 3)
@@ -1017,7 +1018,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 else
                         private_data = (void *)hpt37x_timings_50;
 
-                pr_info(DRV_NAME ": bus clock %dMHz, using %dMHz DPLL.\n",
+                pr_info("bus clock %dMHz, using %dMHz DPLL\n",
                         MHz[clock_slot], MHz[dpll]);
         } else {
                 private_data = (void *)chip_table->clocks[clock_slot];
@@ -1032,7 +1033,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 if (clock_slot < 2 && ppi[0] == &info_hpt370a)
                         ppi[0] = &info_hpt370a_33;
 
-                pr_info(DRV_NAME ": %s using %dMHz bus clock.\n",
+                pr_info("%s using %dMHz bus clock\n",
                         chip_table->name, MHz[clock_slot]);
         }
 
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index eca68caf5f46..765f136d8cd3 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -15,6 +15,8 @@
  *      Work out best PLL policy
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -25,7 +27,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_hpt3x2n"
-#define DRV_VERSION     "0.3.14"
+#define DRV_VERSION     "0.3.15"
 
 enum {
         HPT_PCI_FAST    =       (1 << 31),
@@ -418,7 +420,7 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev)
                 u16 sr;
                 u32 total = 0;
 
-                pr_warning(DRV_NAME ": BIOS clock data not set.\n");
+                pr_warn("BIOS clock data not set\n");
 
                 /* This is the process the HPT371 BIOS is reported to use */
                 for (i = 0; i < 128; i++) {
@@ -528,8 +530,7 @@ hpt372n:
                 ppi[0] = &info_hpt372n;
                 break;
         default:
-                pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n",
-                       dev->device);
+                pr_err("PCI table is bogus, please report (%d)\n", dev->device);
                 return -ENODEV;
         }
 
@@ -578,11 +579,11 @@ hpt372n:
                 pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
         }
         if (adjust == 8) {
-                pr_err(DRV_NAME ": DPLL did not stabilize!\n");
+                pr_err("DPLL did not stabilize!\n");
                 return -ENODEV;
         }
 
-        pr_info(DRV_NAME ": bus clock %dMHz, using 66MHz DPLL.\n", pci_mhz);
+        pr_info("bus clock %dMHz, using 66MHz DPLL\n", pci_mhz);
 
         /*
          * Set our private data up. We only need a few flags