diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/i2c/busses/Kconfig | 15 | ||||
-rw-r--r-- | drivers/i2c/busses/Makefile | 1 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-pca-platform.c | 298 |
3 files changed, 312 insertions, 2 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index b04c99580d0d..51de2ccc1519 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig | |||
@@ -632,8 +632,8 @@ config I2C_PCA_ISA | |||
632 | select I2C_ALGOPCA | 632 | select I2C_ALGOPCA |
633 | default n | 633 | default n |
634 | help | 634 | help |
635 | This driver supports ISA boards using the Philips PCA 9564 | 635 | This driver supports ISA boards using the Philips PCA9564 |
636 | Parallel bus to I2C bus controller | 636 | parallel bus to I2C bus controller. |
637 | 637 | ||
638 | This driver can also be built as a module. If so, the module | 638 | This driver can also be built as a module. If so, the module |
639 | will be called i2c-pca-isa. | 639 | will be called i2c-pca-isa. |
@@ -643,6 +643,17 @@ config I2C_PCA_ISA | |||
643 | delays when I2C/SMBus chip drivers are loaded (e.g. at boot | 643 | delays when I2C/SMBus chip drivers are loaded (e.g. at boot |
644 | time). If unsure, say N. | 644 | time). If unsure, say N. |
645 | 645 | ||
646 | config I2C_PCA_PLATFORM | ||
647 | tristate "PCA9564 as platform device" | ||
648 | select I2C_ALGOPCA | ||
649 | default n | ||
650 | help | ||
651 | This driver supports a memory mapped Philips PCA9564 | ||
652 | parallel bus to I2C bus controller. | ||
653 | |||
654 | This driver can also be built as a module. If so, the module | ||
655 | will be called i2c-pca-platform. | ||
656 | |||
646 | config I2C_MV64XXX | 657 | config I2C_MV64XXX |
647 | tristate "Marvell mv64xxx I2C Controller" | 658 | tristate "Marvell mv64xxx I2C Controller" |
648 | depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL | 659 | depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL |
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index ea7068f1eb6b..378d5c07e048 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile | |||
@@ -30,6 +30,7 @@ obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o | |||
30 | obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o | 30 | obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o |
31 | obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o | 31 | obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o |
32 | obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o | 32 | obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o |
33 | obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o | ||
33 | obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o | 34 | obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o |
34 | obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o | 35 | obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o |
35 | obj-$(CONFIG_I2C_PNX) += i2c-pnx.o | 36 | obj-$(CONFIG_I2C_PNX) += i2c-pnx.o |
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c new file mode 100644 index 000000000000..9d75f51e8f0e --- /dev/null +++ b/drivers/i2c/busses/i2c-pca-platform.c | |||
@@ -0,0 +1,298 @@ | |||
1 | /* | ||
2 | * i2c_pca_platform.c | ||
3 | * | ||
4 | * Platform driver for the PCA9564 I2C controller. | ||
5 | * | ||
6 | * Copyright (C) 2008 Pengutronix | ||
7 | * | ||
8 | * This program is free software; you can redistribute it and/or modify | ||
9 | * it under the terms of the GNU General Public License version 2 as | ||
10 | * published by the Free Software Foundation. | ||
11 | |||
12 | */ | ||
13 | #include <linux/kernel.h> | ||
14 | #include <linux/module.h> | ||
15 | #include <linux/init.h> | ||
16 | #include <linux/slab.h> | ||
17 | #include <linux/delay.h> | ||
18 | #include <linux/errno.h> | ||
19 | #include <linux/i2c.h> | ||
20 | #include <linux/interrupt.h> | ||
21 | #include <linux/platform_device.h> | ||
22 | #include <linux/i2c-algo-pca.h> | ||
23 | #include <linux/i2c-pca-platform.h> | ||
24 | #include <linux/gpio.h> | ||
25 | |||
26 | #include <asm/irq.h> | ||
27 | #include <asm/io.h> | ||
28 | |||
29 | #define res_len(r) ((r)->end - (r)->start + 1) | ||
30 | |||
31 | struct i2c_pca_pf_data { | ||
32 | void __iomem *reg_base; | ||
33 | int irq; /* if 0, use polling */ | ||
34 | int gpio; | ||
35 | wait_queue_head_t wait; | ||
36 | struct i2c_adapter adap; | ||
37 | struct i2c_algo_pca_data algo_data; | ||
38 | unsigned long io_base; | ||
39 | unsigned long io_size; | ||
40 | }; | ||
41 | |||
42 | /* Read/Write functions for different register alignments */ | ||
43 | |||
44 | static int i2c_pca_pf_readbyte8(void *pd, int reg) | ||
45 | { | ||
46 | struct i2c_pca_pf_data *i2c = pd; | ||
47 | return ioread8(i2c->reg_base + reg); | ||
48 | } | ||
49 | |||
50 | static int i2c_pca_pf_readbyte16(void *pd, int reg) | ||
51 | { | ||
52 | struct i2c_pca_pf_data *i2c = pd; | ||
53 | return ioread8(i2c->reg_base + reg * 2); | ||
54 | } | ||
55 | |||
56 | static int i2c_pca_pf_readbyte32(void *pd, int reg) | ||
57 | { | ||
58 | struct i2c_pca_pf_data *i2c = pd; | ||
59 | return ioread8(i2c->reg_base + reg * 4); | ||
60 | } | ||
61 | |||
62 | static void i2c_pca_pf_writebyte8(void *pd, int reg, int val) | ||
63 | { | ||
64 | struct i2c_pca_pf_data *i2c = pd; | ||
65 | iowrite8(val, i2c->reg_base + reg); | ||
66 | } | ||
67 | |||
68 | static void i2c_pca_pf_writebyte16(void *pd, int reg, int val) | ||
69 | { | ||
70 | struct i2c_pca_pf_data *i2c = pd; | ||
71 | iowrite8(val, i2c->reg_base + reg * 2); | ||
72 | } | ||
73 | |||
74 | static void i2c_pca_pf_writebyte32(void *pd, int reg, int val) | ||
75 | { | ||
76 | struct i2c_pca_pf_data *i2c = pd; | ||
77 | iowrite8(val, i2c->reg_base + reg * 4); | ||
78 | } | ||
79 | |||
80 | |||
81 | static int i2c_pca_pf_waitforcompletion(void *pd) | ||
82 | { | ||
83 | struct i2c_pca_pf_data *i2c = pd; | ||
84 | int ret = 0; | ||
85 | |||
86 | if (i2c->irq) { | ||
87 | ret = wait_event_interruptible(i2c->wait, | ||
88 | i2c->algo_data.read_byte(i2c, I2C_PCA_CON) | ||
89 | & I2C_PCA_CON_SI); | ||
90 | } else { | ||
91 | /* | ||
92 | * Do polling... | ||
93 | * XXX: Could get stuck in extreme cases! | ||
94 | * Maybe add timeout, but using irqs is preferred anyhow. | ||
95 | */ | ||
96 | while ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) | ||
97 | & I2C_PCA_CON_SI) == 0) | ||
98 | udelay(100); | ||
99 | } | ||
100 | |||
101 | return ret; | ||
102 | } | ||
103 | |||
104 | static void i2c_pca_pf_dummyreset(void *pd) | ||
105 | { | ||
106 | struct i2c_pca_pf_data *i2c = pd; | ||
107 | printk(KERN_WARNING "%s: No reset-pin found. Chip may get stuck!\n", | ||
108 | i2c->adap.name); | ||
109 | } | ||
110 | |||
111 | static void i2c_pca_pf_resetchip(void *pd) | ||
112 | { | ||
113 | struct i2c_pca_pf_data *i2c = pd; | ||
114 | |||
115 | gpio_set_value(i2c->gpio, 0); | ||
116 | ndelay(100); | ||
117 | gpio_set_value(i2c->gpio, 1); | ||
118 | } | ||
119 | |||
120 | static irqreturn_t i2c_pca_pf_handler(int this_irq, void *dev_id) | ||
121 | { | ||
122 | struct i2c_pca_pf_data *i2c = dev_id; | ||
123 | |||
124 | if ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0) | ||
125 | return IRQ_NONE; | ||
126 | |||
127 | wake_up_interruptible(&i2c->wait); | ||
128 | |||
129 | return IRQ_HANDLED; | ||
130 | } | ||
131 | |||
132 | |||
133 | static int __devinit i2c_pca_pf_probe(struct platform_device *pdev) | ||
134 | { | ||
135 | struct i2c_pca_pf_data *i2c; | ||
136 | struct resource *res; | ||
137 | struct i2c_pca9564_pf_platform_data *platform_data = | ||
138 | pdev->dev.platform_data; | ||
139 | int ret = 0; | ||
140 | int irq; | ||
141 | |||
142 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
143 | irq = platform_get_irq(pdev, 0); | ||
144 | /* If irq is 0, we do polling. */ | ||
145 | |||
146 | if (res == NULL) { | ||
147 | ret = -ENODEV; | ||
148 | goto e_print; | ||
149 | } | ||
150 | |||
151 | if (!request_mem_region(res->start, res_len(res), res->name)) { | ||
152 | ret = -ENOMEM; | ||
153 | goto e_print; | ||
154 | } | ||
155 | |||
156 | i2c = kzalloc(sizeof(struct i2c_pca_pf_data), GFP_KERNEL); | ||
157 | if (!i2c) { | ||
158 | ret = -ENOMEM; | ||
159 | goto e_alloc; | ||
160 | } | ||
161 | |||
162 | init_waitqueue_head(&i2c->wait); | ||
163 | |||
164 | i2c->reg_base = ioremap(res->start, res_len(res)); | ||
165 | if (!i2c->reg_base) { | ||
166 | ret = -EIO; | ||
167 | goto e_remap; | ||
168 | } | ||
169 | i2c->io_base = res->start; | ||
170 | i2c->io_size = res_len(res); | ||
171 | i2c->irq = irq; | ||
172 | |||
173 | i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0; | ||
174 | i2c->adap.owner = THIS_MODULE; | ||
175 | snprintf(i2c->adap.name, sizeof(i2c->adap.name), "PCA9564 at 0x%08lx", | ||
176 | (unsigned long) res->start); | ||
177 | i2c->adap.algo_data = &i2c->algo_data; | ||
178 | i2c->adap.dev.parent = &pdev->dev; | ||
179 | i2c->adap.timeout = platform_data->timeout; | ||
180 | |||
181 | i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed; | ||
182 | i2c->algo_data.data = i2c; | ||
183 | |||
184 | switch (res->flags & IORESOURCE_MEM_TYPE_MASK) { | ||
185 | case IORESOURCE_MEM_32BIT: | ||
186 | i2c->algo_data.write_byte = i2c_pca_pf_writebyte32; | ||
187 | i2c->algo_data.read_byte = i2c_pca_pf_readbyte32; | ||
188 | break; | ||
189 | case IORESOURCE_MEM_16BIT: | ||
190 | i2c->algo_data.write_byte = i2c_pca_pf_writebyte16; | ||
191 | i2c->algo_data.read_byte = i2c_pca_pf_readbyte16; | ||
192 | break; | ||
193 | case IORESOURCE_MEM_8BIT: | ||
194 | default: | ||
195 | i2c->algo_data.write_byte = i2c_pca_pf_writebyte8; | ||
196 | i2c->algo_data.read_byte = i2c_pca_pf_readbyte8; | ||
197 | break; | ||
198 | } | ||
199 | |||
200 | i2c->algo_data.wait_for_completion = i2c_pca_pf_waitforcompletion; | ||
201 | |||
202 | i2c->gpio = platform_data->gpio; | ||
203 | i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset; | ||
204 | |||
205 | /* Use gpio_is_valid() when in mainline */ | ||
206 | if (i2c->gpio > -1) { | ||
207 | ret = gpio_request(i2c->gpio, i2c->adap.name); | ||
208 | if (ret == 0) { | ||
209 | gpio_direction_output(i2c->gpio, 1); | ||
210 | i2c->algo_data.reset_chip = i2c_pca_pf_resetchip; | ||
211 | } else { | ||
212 | printk(KERN_WARNING "%s: Registering gpio failed!\n", | ||
213 | i2c->adap.name); | ||
214 | i2c->gpio = ret; | ||
215 | } | ||
216 | } | ||
217 | |||
218 | if (irq) { | ||
219 | ret = request_irq(irq, i2c_pca_pf_handler, | ||
220 | IRQF_TRIGGER_FALLING, i2c->adap.name, i2c); | ||
221 | if (ret) | ||
222 | goto e_reqirq; | ||
223 | } | ||
224 | |||
225 | if (i2c_pca_add_numbered_bus(&i2c->adap) < 0) { | ||
226 | ret = -ENODEV; | ||
227 | goto e_adapt; | ||
228 | } | ||
229 | |||
230 | platform_set_drvdata(pdev, i2c); | ||
231 | |||
232 | printk(KERN_INFO "%s registered.\n", i2c->adap.name); | ||
233 | |||
234 | return 0; | ||
235 | |||
236 | e_adapt: | ||
237 | if (irq) | ||
238 | free_irq(irq, i2c); | ||
239 | e_reqirq: | ||
240 | if (i2c->gpio > -1) | ||
241 | gpio_free(i2c->gpio); | ||
242 | |||
243 | iounmap(i2c->reg_base); | ||
244 | e_remap: | ||
245 | kfree(i2c); | ||
246 | e_alloc: | ||
247 | release_mem_region(res->start, res_len(res)); | ||
248 | e_print: | ||
249 | printk(KERN_ERR "Registering PCA9564 FAILED! (%d)\n", ret); | ||
250 | return ret; | ||
251 | } | ||
252 | |||
253 | static int __devexit i2c_pca_pf_remove(struct platform_device *pdev) | ||
254 | { | ||
255 | struct i2c_pca_pf_data *i2c = platform_get_drvdata(pdev); | ||
256 | platform_set_drvdata(pdev, NULL); | ||
257 | |||
258 | i2c_del_adapter(&i2c->adap); | ||
259 | |||
260 | if (i2c->irq) | ||
261 | free_irq(i2c->irq, i2c); | ||
262 | |||
263 | if (i2c->gpio > -1) | ||
264 | gpio_free(i2c->gpio); | ||
265 | |||
266 | iounmap(i2c->reg_base); | ||
267 | release_mem_region(i2c->io_base, i2c->io_size); | ||
268 | kfree(i2c); | ||
269 | |||
270 | return 0; | ||
271 | } | ||
272 | |||
273 | static struct platform_driver i2c_pca_pf_driver = { | ||
274 | .probe = i2c_pca_pf_probe, | ||
275 | .remove = __devexit_p(i2c_pca_pf_remove), | ||
276 | .driver = { | ||
277 | .name = "i2c-pca-platform", | ||
278 | .owner = THIS_MODULE, | ||
279 | }, | ||
280 | }; | ||
281 | |||
282 | static int __init i2c_pca_pf_init(void) | ||
283 | { | ||
284 | return platform_driver_register(&i2c_pca_pf_driver); | ||
285 | } | ||
286 | |||
287 | static void __exit i2c_pca_pf_exit(void) | ||
288 | { | ||
289 | platform_driver_unregister(&i2c_pca_pf_driver); | ||
290 | } | ||
291 | |||
292 | MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>"); | ||
293 | MODULE_DESCRIPTION("I2C-PCA9564 platform driver"); | ||
294 | MODULE_LICENSE("GPL"); | ||
295 | |||
296 | module_init(i2c_pca_pf_init); | ||
297 | module_exit(i2c_pca_pf_exit); | ||
298 | |||