1 files changed, 164 insertions, 236 deletions

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2b1fded6619d..09d82062b973 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -33,7 +33,7 @@
 #include <linux/serial.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 /*
  * Version Information
@@ -82,8 +82,8 @@
  * Defines used for sending commands to port
  */
 
-#define WAIT_FOR_EVER   (HZ * 0 )       /* timeout urb is wait for ever */
-#define MOS_WDR_TIMEOUT (HZ * 5 )       /* default urb timeout */
+#define WAIT_FOR_EVER   (HZ * 0)        /* timeout urb is wait for ever */
+#define MOS_WDR_TIMEOUT (HZ * 5)        /* default urb timeout */
 
 #define MOS_PORT1       0x0200
 #define MOS_PORT2       0x0300
@@ -102,8 +102,8 @@
 
 #define MAX_NAME_LEN    64
 
-#define ZLP_REG1  0x3A          //Zero_Flag_Reg1    58
-#define ZLP_REG5  0x3E          //Zero_Flag_Reg5    62
+#define ZLP_REG1  0x3A          /* Zero_Flag_Reg1    58 */
+#define ZLP_REG5  0x3E          /* Zero_Flag_Reg5    62 */
 
 /* For higher baud Rates use TIOCEXBAUD */
 #define TIOCEXBAUD     0x5462
@@ -142,7 +142,7 @@
 #define MOS_MSR_DELTA_RI    0x40
 #define MOS_MSR_DELTA_CD    0x80
 
-// Serial Port register Address
+/* Serial Port register Address */
 #define INTERRUPT_ENABLE_REGISTER  ((__u16)(0x01))
 #define FIFO_CONTROL_REGISTER      ((__u16)(0x02))
 #define LINE_CONTROL_REGISTER      ((__u16)(0x03))
@@ -201,11 +201,11 @@ struct moschip_port {
         struct async_icount icount;
         struct usb_serial_port *port;   /* loop back to the owner of this object */
 
-        /*Offsets */
+        /* Offsets */
         __u8 SpRegOffset;
         __u8 ControlRegOffset;
         __u8 DcrRegOffset;
-        //for processing control URBS in interrupt context
+        /* for processing control URBS in interrupt context */
         struct urb *control_urb;
         struct usb_ctrlrequest *dr;
         char *ctrl_buf;
@@ -244,7 +244,7 @@ static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg,
  */
 
 static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg,
-                                __u16 * val)
+                                __u16 *val)
 {
         struct usb_device *dev = port->serial->dev;
         int ret = 0;
@@ -269,16 +269,15 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
 
         struct usb_device *dev = port->serial->dev;
         val = val & 0x00ff;
-        // For the UART control registers, the application number need to be Or'ed
+        /* For the UART control registers, the application number need
+           to be Or'ed */
         if (port->serial->num_ports == 4) {
-                val |=
-                    (((__u16) port->number - (__u16) (port->serial->minor)) +
-                     1) << 8;
+                val |= (((__u16) port->number -
+                                (__u16) (port->serial->minor)) + 1) << 8;
                 dbg("mos7840_set_uart_reg application number is %x\n", val);
         } else {
                 if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
-                        val |=
-                            (((__u16) port->number -
+                        val |= (((__u16) port->number -
                               (__u16) (port->serial->minor)) + 1) << 8;
                         dbg("mos7840_set_uart_reg application number is %x\n",
                             val);
@@ -302,14 +301,15 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
  *      by passing usb_rcvctrlpipe function as parameter.
  */
 static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
-                                __u16 * val)
+                                __u16 *val)
 {
         struct usb_device *dev = port->serial->dev;
         int ret = 0;
         __u16 Wval;
 
-        //dbg("application number is %4x \n",(((__u16)port->number - (__u16)(port->serial->minor))+1)<<8);
-        /*Wval  is same as application number */
+        /* dbg("application number is %4x \n",
+            (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */
+        /* Wval  is same as application number */
         if (port->serial->num_ports == 4) {
                 Wval =
                     (((__u16) port->number - (__u16) (port->serial->minor)) +
@@ -317,14 +317,12 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
                 dbg("mos7840_get_uart_reg application number is %x\n", Wval);
         } else {
                 if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
-                        Wval =
-                            (((__u16) port->number -
+                        Wval = (((__u16) port->number -
                               (__u16) (port->serial->minor)) + 1) << 8;
                         dbg("mos7840_get_uart_reg application number is %x\n",
                             Wval);
                 } else {
-                        Wval =
-                            (((__u16) port->number -
+                        Wval = (((__u16) port->number -
                               (__u16) (port->serial->minor)) + 2) << 8;
                         dbg("mos7840_get_uart_reg application number is %x\n",
                             Wval);
@@ -406,11 +404,11 @@ static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
         dbg("%s - %02x", __func__, new_lsr);
 
         if (new_lsr & SERIAL_LSR_BI) {
-                //
-                // Parity and Framing errors only count if they
-                // occur exclusive of a break being
-                // received.
-                //
+                /*
+                 * Parity and Framing errors only count if they
+                 * occur exclusive of a break being
+                 * received.
+                 */
                 new_lsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI);
         }
 
@@ -492,7 +490,7 @@ exit:
 }
 
 static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
-                           __u16 * val)
+                           __u16 *val)
 {
         struct usb_device *dev = mcs->port->serial->dev;
         struct usb_ctrlrequest *dr = mcs->dr;
@@ -501,7 +499,7 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
 
         dr->bRequestType = MCS_RD_RTYPE;
         dr->bRequest = MCS_RDREQ;
-        dr->wValue = cpu_to_le16(Wval); //0;
+        dr->wValue = cpu_to_le16(Wval); /* 0 */
         dr->wIndex = cpu_to_le16(reg);
         dr->wLength = cpu_to_le16(2);
 
@@ -607,7 +605,8 @@ static void mos7840_interrupt_callback(struct urb *urb)
                         }
                 }
         }
-        if (!(rv < 0)) /* the completion handler for the control urb will resubmit */
+        if (!(rv < 0))
+                /* the completion handler for the control urb will resubmit */
                 return;
 exit:
         result = usb_submit_urb(urb, GFP_ATOMIC);
@@ -656,8 +655,8 @@ static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port,
         if (!port ||
             mos7840_port_paranoia_check(port, function) ||
             mos7840_serial_paranoia_check(port->serial, function)) {
-                /* then say that we don't have a valid usb_serial thing, which will
-                 * end up genrating -ENODEV return values */
+                /* then say that we don't have a valid usb_serial thing,
+                 * which will end up genrating -ENODEV return values */
                 return NULL;
         }
 
@@ -741,8 +740,8 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 
 /*****************************************************************************
  * mos7840_bulk_out_data_callback
- *      this is the callback function for when we have finished sending serial data
- *      on the bulk out endpoint.
+ *      this is the callback function for when we have finished sending
+ *      serial data on the bulk out endpoint.
  *****************************************************************************/
 
 static void mos7840_bulk_out_data_callback(struct urb *urb)
@@ -848,7 +847,8 @@ static int mos7840_open(struct tty_struct *tty,
                         continue;
                 }
 
-                urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
+                urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
+                                                                GFP_KERNEL);
                 if (!urb->transfer_buffer) {
                         usb_free_urb(urb);
                         mos7840_port->write_urb_pool[j] = NULL;
@@ -869,9 +869,8 @@ static int mos7840_open(struct tty_struct *tty,
  * 0x08 : SP1/2 Control Reg
  *****************************************************************************/
 
-//NEED to check the following Block
+        /* NEED to check the following Block */
 
-        status = 0;
         Data = 0x0;
         status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
         if (status < 0) {
@@ -891,36 +890,35 @@ static int mos7840_open(struct tty_struct *tty,
                 dbg("writing Spreg failed\n");
                 return -1;
         }
-//End of block to be checked
+        /* End of block to be checked */
 
-        status = 0;
         Data = 0x0;
-        status =
-            mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data);
+        status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
+                                                                        &Data);
         if (status < 0) {
                 dbg("Reading Controlreg failed\n");
                 return -1;
         }
-        Data |= 0x08;           //Driver done bit
-        Data |= 0x20;           //rx_disable
-        status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
+        Data |= 0x08;           /* Driver done bit */
+        Data |= 0x20;           /* rx_disable */
+        status = mos7840_set_reg_sync(port,
+                                mos7840_port->ControlRegOffset, Data);
         if (status < 0) {
                 dbg("writing Controlreg failed\n");
                 return -1;
         }
-        //do register settings here
-        // Set all regs to the device default values.
-        ////////////////////////////////////
-        // First Disable all interrupts.
-        ////////////////////////////////////
-
+        /* do register settings here */
+        /* Set all regs to the device default values. */
+        /***********************************
+         * First Disable all interrupts.
+         ***********************************/
         Data = 0x00;
         status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
         if (status < 0) {
                 dbg("disableing interrupts failed\n");
                 return -1;
         }
-        // Set FIFO_CONTROL_REGISTER to the default value
+        /* Set FIFO_CONTROL_REGISTER to the default value */
         Data = 0x00;
         status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
         if (status < 0) {
@@ -947,90 +945,73 @@ static int mos7840_open(struct tty_struct *tty,
         status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
         mos7840_port->shadowLCR = Data;
 
-        Data |= SERIAL_LCR_DLAB;        //data latch enable in LCR 0x80
+        Data |= SERIAL_LCR_DLAB;        /* data latch enable in LCR 0x80 */
         status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
 
         Data = 0x0c;
-        status = 0;
         status = mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
 
         Data = 0x0;
-        status = 0;
         status = mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
 
         Data = 0x00;
-        status = 0;
         status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
 
         Data = Data & ~SERIAL_LCR_DLAB;
-        status = 0;
         status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
         mos7840_port->shadowLCR = Data;
 
-        //clearing Bulkin and Bulkout Fifo
+        /* clearing Bulkin and Bulkout Fifo */
         Data = 0x0;
-        status = 0;
         status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
 
         Data = Data | 0x0c;
-        status = 0;
         status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
 
         Data = Data & ~0x0c;
-        status = 0;
         status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
-        //Finally enable all interrupts
-        Data = 0x0;
+        /* Finally enable all interrupts */
         Data = 0x0c;
-        status = 0;
         status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
 
-        //clearing rx_disable
+        /* clearing rx_disable */
         Data = 0x0;
-        status = 0;
-        status =
-            mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data);
+        status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
+                                                                        &Data);
         Data = Data & ~0x20;
-        status = 0;
-        status =
-            mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
+        status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
+                                                                        Data);
 
-        // rx_negate
+        /* rx_negate */
         Data = 0x0;
-        status = 0;
-        status =
-            mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data);
+        status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
+                                                                        &Data);
         Data = Data | 0x10;
-        status = 0;
-        status =
-            mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
+        status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
+                                                                        Data);
 
         /* force low_latency on so that our tty_push actually forces *
          * the data through,otherwise it is scheduled, and with      *
          * high data rates (like with OHCI) data can get lost.       */
-
         if (tty)
                 tty->low_latency = 1;
-/* Check to see if we've set up our endpoint info yet    *
-     * (can't set it up in mos7840_startup as the structures *
-     * were not set up at that time.)                        */
+
+        /* Check to see if we've set up our endpoint info yet    *
+         * (can't set it up in mos7840_startup as the structures *
+         * were not set up at that time.)                        */
         if (port0->open_ports == 1) {
                 if (serial->port[0]->interrupt_in_buffer == NULL) {
-
                         /* set up interrupt urb */
-
                         usb_fill_int_urb(serial->port[0]->interrupt_in_urb,
-                                         serial->dev,
-                                         usb_rcvintpipe(serial->dev,
-                                                        serial->port[0]->
-                                                        interrupt_in_endpointAddress),
-                                         serial->port[0]->interrupt_in_buffer,
-                                         serial->port[0]->interrupt_in_urb->
-                                         transfer_buffer_length,
-                                         mos7840_interrupt_callback,
-                                         serial,
-                                         serial->port[0]->interrupt_in_urb->
-                                         interval);
+                                serial->dev,
+                                usb_rcvintpipe(serial->dev,
+                                serial->port[0]->interrupt_in_endpointAddress),
+                                serial->port[0]->interrupt_in_buffer,
+                                serial->port[0]->interrupt_in_urb->
+                                transfer_buffer_length,
+                                mos7840_interrupt_callback,
+                                serial,
+                                serial->port[0]->interrupt_in_urb->interval);
 
                         /* start interrupt read for mos7840               *
                          * will continue as long as mos7840 is connected  */
@@ -1085,14 +1066,16 @@ static int mos7840_open(struct tty_struct *tty,
         memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount));
 
         /* initialize our port settings */
-        mos7840_port->shadowMCR = MCR_MASTER_IE;        /* Must set to enable ints! */
+        /* Must set to enable ints! */
+        mos7840_port->shadowMCR = MCR_MASTER_IE;
         /* send a open port command */
         mos7840_port->open = 1;
-        //mos7840_change_port_settings(mos7840_port,old_termios);
+        /* mos7840_change_port_settings(mos7840_port,old_termios); */
         mos7840_port->icount.tx = 0;
         mos7840_port->icount.rx = 0;
 
-        dbg("\n\nusb_serial serial:%p       mos7840_port:%p\n      usb_serial_port port:%p\n\n", serial, mos7840_port, port);
+        dbg("\n\nusb_serial serial:%p       mos7840_port:%p\n      usb_serial_port port:%p\n\n",
+                                serial, mos7840_port, port);
 
         return 0;
 
@@ -1129,11 +1112,11 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty)
                 return 0;
         }
 
-        spin_lock_irqsave(&mos7840_port->pool_lock,flags);
+        spin_lock_irqsave(&mos7840_port->pool_lock, flags);
         for (i = 0; i < NUM_URBS; ++i)
                 if (mos7840_port->busy[i])
                         chars += URB_TRANSFER_BUFFER_SIZE;
-        spin_unlock_irqrestore(&mos7840_port->pool_lock,flags);
+        spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
         dbg("%s - returns %d", __func__, chars);
         return chars;
 
@@ -1161,9 +1144,8 @@ static void mos7840_block_until_tx_empty(struct tty_struct *tty,
                 count = mos7840_chars_in_buffer(tty);
 
                 /* Check for Buffer status */
-                if (count <= 0) {
+                if (count <= 0)
                         return;
-                }
 
                 /* Block the thread for a while */
                 interruptible_sleep_on_timeout(&mos7840_port->wait_chase,
@@ -1245,11 +1227,11 @@ static void mos7840_close(struct tty_struct *tty,
                 }
                 if ((&mos7840_port->control_urb)) {
                         dbg("%s", "Shutdown control read\n");
-                        //      usb_kill_urb (mos7840_port->control_urb);
+                        /*/      usb_kill_urb (mos7840_port->control_urb); */
                 }
         }
-//      if(mos7840_port->ctrl_buf != NULL)
-//              kfree(mos7840_port->ctrl_buf);
+/*      if(mos7840_port->ctrl_buf != NULL) */
+/*              kfree(mos7840_port->ctrl_buf); */
         port0->open_ports--;
         dbg("mos7840_num_open_ports in close%d:in port%d\n",
             port0->open_ports, port->number);
@@ -1262,10 +1244,8 @@ static void mos7840_close(struct tty_struct *tty,
 
         if (mos7840_port->write_urb) {
                 /* if this urb had a transfer buffer already (old tx) free it */
-
-                if (mos7840_port->write_urb->transfer_buffer != NULL) {
+                if (mos7840_port->write_urb->transfer_buffer != NULL)
                         kfree(mos7840_port->write_urb->transfer_buffer);
-                }
                 usb_free_urb(mos7840_port->write_urb);
         }
 
@@ -1302,9 +1282,8 @@ static void mos7840_block_until_chase_response(struct tty_struct *tty,
                 count = mos7840_chars_in_buffer(tty);
 
                 /* Check for Buffer status */
-                if (count <= 0) {
+                if (count <= 0)
                         return;
-                }
 
                 /* Block the thread for a while */
                 interruptible_sleep_on_timeout(&mos7840_port->wait_chase,
@@ -1349,9 +1328,8 @@ static void mos7840_break(struct tty_struct *tty, int break_state)
 
         mos7840_port = mos7840_get_port_private(port);
 
-        if (mos7840_port == NULL) {
+        if (mos7840_port == NULL)
                 return;
-        }
 
         if (serial->dev)
                 /* flush and block until tx is empty */
@@ -1403,9 +1381,8 @@ static int mos7840_write_room(struct tty_struct *tty)
 
         spin_lock_irqsave(&mos7840_port->pool_lock, flags);
         for (i = 0; i < NUM_URBS; ++i) {
-                if (!mos7840_port->busy[i]) {
+                if (!mos7840_port->busy[i])
                         room += URB_TRANSFER_BUFFER_SIZE;
-                }
         }
         spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
 
@@ -1435,45 +1412,41 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
         struct moschip_port *mos7840_port;
         struct usb_serial *serial;
         struct urb *urb;
-        //__u16 Data;
+        /* __u16 Data; */
         const unsigned char *current_position = data;
         unsigned char *data1;
         dbg("%s \n", "entering ...........");
-        //dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",mos7840_port->shadowLCR);
+        /* dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
+                                        mos7840_port->shadowLCR); */
 
 #ifdef NOTMOS7840
         Data = 0x00;
-        status = 0;
         status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
         mos7840_port->shadowLCR = Data;
         dbg("mos7840_write: LINE_CONTROL_REGISTER is %x\n", Data);
         dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
             mos7840_port->shadowLCR);
 
-        //Data = 0x03;
-        //status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data);
-        //mos7840_port->shadowLCR=Data;//Need to add later
+        /* Data = 0x03; */
+        /* status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); */
+        /* mos7840_port->shadowLCR=Data;//Need to add later */
 
-        Data |= SERIAL_LCR_DLAB;        //data latch enable in LCR 0x80
-        status = 0;
+        Data |= SERIAL_LCR_DLAB;        /* data latch enable in LCR 0x80 */
         status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
 
-        //Data = 0x0c;
-        //status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data);
+        /* Data = 0x0c; */
+        /* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */
         Data = 0x00;
-        status = 0;
         status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data);
         dbg("mos7840_write:DLL value is %x\n", Data);
 
         Data = 0x0;
-        status = 0;
         status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data);
         dbg("mos7840_write:DLM value is %x\n", Data);
 
         Data = Data & ~SERIAL_LCR_DLAB;
         dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
             mos7840_port->shadowLCR);
-        status = 0;
         status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
 #endif
 
@@ -1598,7 +1571,6 @@ static void mos7840_throttle(struct tty_struct *tty)
         /* if we are implementing RTS/CTS, toggle that line */
         if (tty->termios->c_cflag & CRTSCTS) {
                 mos7840_port->shadowMCR &= ~MCR_RTS;
-                status = 0;
                 status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
                                          mos7840_port->shadowMCR);
                 if (status < 0)
@@ -1610,8 +1582,9 @@ static void mos7840_throttle(struct tty_struct *tty)
 
 /*****************************************************************************
  * mos7840_unthrottle
- *      this function is called by the tty driver when it wants to resume the data
- *      being read from the port (called after SerialThrottle is called)
+ *      this function is called by the tty driver when it wants to resume
+ *      the data being read from the port (called after mos7840_throttle is
+ *      called)
  *****************************************************************************/
 static void mos7840_unthrottle(struct tty_struct *tty)
 {
@@ -1645,7 +1618,6 @@ static void mos7840_unthrottle(struct tty_struct *tty)
         /* if we are implementing RTS/CTS, toggle that line */
         if (tty->termios->c_cflag & CRTSCTS) {
                 mos7840_port->shadowMCR |= MCR_RTS;
-                status = 0;
                 status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
                                          mos7840_port->shadowMCR);
                 if (status < 0)
@@ -1660,7 +1632,7 @@ static int mos7840_tiocmget(struct tty_struct *tty, struct file *file)
         unsigned int result;
         __u16 msr;
         __u16 mcr;
-        int status = 0;
+        int status;
         mos7840_port = mos7840_get_port_private(port);
 
         dbg("%s - port %d", __func__, port->number);
@@ -1731,7 +1703,7 @@ static int mos7840_tiocmset(struct tty_struct *tty, struct file *file,
  *      baud rate.
  *****************************************************************************/
 static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor,
-                                          __u16 * clk_sel_val)
+                                          __u16 *clk_sel_val)
 {
 
         dbg("%s - %d", __func__, baudRate);
@@ -1783,9 +1755,8 @@ static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor,
                 /* Check for round off */
                 round1 = (__u16) (2304000L / baudrate);
                 round = (__u16) (round1 - (custom * 10));
-                if (round > 4) {
+                if (round > 4)
                         custom++;
-                }
                 *divisor = custom;
 
                 dbg(" Baud %d = %d\n", baudrate, custom);
@@ -1833,16 +1804,15 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 
         dbg("%s - port = %d, baud = %d", __func__,
             mos7840_port->port->number, baudRate);
-        //reset clk_uart_sel in spregOffset
+        /* reset clk_uart_sel in spregOffset */
         if (baudRate > 115200) {
 #ifdef HW_flow_control
-                //NOTE: need to see the pther register to modify
-                //setting h/w flow control bit to 1;
-                status = 0;
+                /* NOTE: need to see the pther register to modify */
+                /* setting h/w flow control bit to 1 */
                 Data = 0x2b;
                 mos7840_port->shadowMCR = Data;
-                status =
-                    mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+                status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+                                                                        Data);
                 if (status < 0) {
                         dbg("Writing spreg failed in set_serial_baud\n");
                         return -1;
@@ -1851,12 +1821,11 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 
         } else {
 #ifdef HW_flow_control
-                //setting h/w flow control bit to 0;
-                status = 0;
+                / *setting h/w flow control bit to 0 */
                 Data = 0xb;
                 mos7840_port->shadowMCR = Data;
-                status =
-                    mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+                status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+                                                                        Data);
                 if (status < 0) {
                         dbg("Writing spreg failed in set_serial_baud\n");
                         return -1;
@@ -1865,25 +1834,20 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 
         }
 
-        if (1)                  //baudRate <= 115200)
-        {
+        if (1) {                /* baudRate <= 115200) */
                 clk_sel_val = 0x0;
                 Data = 0x0;
-                status = 0;
-                status =
-                    mos7840_calc_baud_rate_divisor(baudRate, &divisor,
+                status = mos7840_calc_baud_rate_divisor(baudRate, &divisor,
                                                    &clk_sel_val);
-                status =
-                    mos7840_get_reg_sync(port, mos7840_port->SpRegOffset,
-                                         &Data);
+                status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset,
+                                                                 &Data);
                 if (status < 0) {
                         dbg("reading spreg failed in set_serial_baud\n");
                         return -1;
                 }
                 Data = (Data & 0x8f) | clk_sel_val;
-                status = 0;
-                status =
-                    mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
+                status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset,
+                                                                Data);
                 if (status < 0) {
                         dbg("Writing spreg failed in set_serial_baud\n");
                         return -1;
@@ -1915,7 +1879,6 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
                 mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
 
         }
-
         return status;
 }
 
@@ -2006,9 +1969,8 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
                 dbg("%s - parity = none", __func__);
         }
 
-        if (cflag & CMSPAR) {
+        if (cflag & CMSPAR)
                 lParity = lParity | 0x20;
-        }
 
         /* Change the Stop bit */
         if (cflag & CSTOPB) {
@@ -2050,16 +2012,13 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
         /* set up the MCR register and send it to the mos7840 */
 
         mos7840_port->shadowMCR = MCR_MASTER_IE;
-        if (cflag & CBAUD) {
+        if (cflag & CBAUD)
                 mos7840_port->shadowMCR |= (MCR_DTR | MCR_RTS);
-        }
 
-        if (cflag & CRTSCTS) {
+        if (cflag & CRTSCTS)
                 mos7840_port->shadowMCR |= (MCR_XON_ANY);
-
-        } else {
+        else
                 mos7840_port->shadowMCR &= ~(MCR_XON_ANY);
-        }
 
         Data = mos7840_port->shadowMCR;
         mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
@@ -2255,7 +2214,6 @@ static int mos7840_set_modem_info(struct moschip_port *mos7840_port,
         mos7840_port->shadowMCR = mcr;
 
         Data = mos7840_port->shadowMCR;
-        status = 0;
         status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
         if (status < 0) {
                 dbg("setting MODEM_CONTROL_REGISTER Failed\n");
@@ -2276,8 +2234,7 @@ static int mos7840_get_modem_info(struct moschip_port *mos7840_port,
         unsigned int result = 0;
         __u16 msr;
         unsigned int mcr = mos7840_port->shadowMCR;
-        int status = 0;
-        status = mos7840_get_uart_reg(mos7840_port->port,
+        mos7840_get_uart_reg(mos7840_port->port,
                                                 MODEM_STATUS_REGISTER, &msr);
         result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)      /* 0x002 */
             |((mcr & MCR_RTS) ? TIOCM_RTS : 0)  /* 0x004 */
@@ -2389,7 +2346,7 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
                 dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
                 cprev = mos7840_port->icount;
                 while (1) {
-                        //interruptible_sleep_on(&mos7840_port->delta_msr_wait);
+                        /* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */
                         mos7840_port->delta_msr_cond = 0;
                         wait_event_interruptible(mos7840_port->delta_msr_wait,
                                                  (mos7840_port->
@@ -2494,8 +2451,9 @@ static int mos7840_startup(struct usb_serial *serial)
                         goto error;
                 }
 
-                /* Initialize all port interrupt end point to port 0 int endpoint *
-                 * Our device has only one interrupt end point comman to all port */
+                /* Initialize all port interrupt end point to port 0 int
+                 * endpoint. Our device has only one interrupt end point
+                 * common to all port */
 
                 mos7840_port->port = serial->port[i];
                 mos7840_set_port_private(serial->port[i], mos7840_port);
@@ -2531,27 +2489,23 @@ static int mos7840_startup(struct usb_serial *serial)
                         mos7840_port->DcrRegOffset = 0x1c;
                 }
                 mos7840_dump_serial_port(mos7840_port);
-
                 mos7840_set_port_private(serial->port[i], mos7840_port);
 
-                //enable rx_disable bit in control register
-
-                status =
-                    mos7840_get_reg_sync(serial->port[i],
-                                         mos7840_port->ControlRegOffset, &Data);
+                /* enable rx_disable bit in control register */
+                status = mos7840_get_reg_sync(serial->port[i],
+                                 mos7840_port->ControlRegOffset, &Data);
                 if (status < 0) {
                         dbg("Reading ControlReg failed status-0x%x\n", status);
                         break;
                 } else
                         dbg("ControlReg Reading success val is %x, status%d\n",
                             Data, status);
-                Data |= 0x08;   //setting driver done bit
-                Data |= 0x04;   //sp1_bit to have cts change reflect in modem status reg
+                Data |= 0x08;   /* setting driver done bit */
+                Data |= 0x04;   /* sp1_bit to have cts change reflect in
+                                   modem status reg */
 
-                //Data |= 0x20; //rx_disable bit
-                status = 0;
-                status =
-                    mos7840_set_reg_sync(serial->port[i],
+                /* Data |= 0x20; //rx_disable bit */
+                status = mos7840_set_reg_sync(serial->port[i],
                                          mos7840_port->ControlRegOffset, Data);
                 if (status < 0) {
                         dbg("Writing ControlReg failed(rx_disable) status-0x%x\n", status);
@@ -2560,13 +2514,11 @@ static int mos7840_startup(struct usb_serial *serial)
                         dbg("ControlReg Writing success(rx_disable) status%d\n",
                             status);
 
-                //Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 and 0x24 in DCR3
+                /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
+                   and 0x24 in DCR3 */
                 Data = 0x01;
-                status = 0;
-                status =
-                    mos7840_set_reg_sync(serial->port[i],
-                                         (__u16) (mos7840_port->DcrRegOffset +
-                                                  0), Data);
+                status = mos7840_set_reg_sync(serial->port[i],
+                         (__u16) (mos7840_port->DcrRegOffset + 0), Data);
                 if (status < 0) {
                         dbg("Writing DCR0 failed status-0x%x\n", status);
                         break;
@@ -2574,11 +2526,8 @@ static int mos7840_startup(struct usb_serial *serial)
                         dbg("DCR0 Writing success status%d\n", status);
 
                 Data = 0x05;
-                status = 0;
-                status =
-                    mos7840_set_reg_sync(serial->port[i],
-                                         (__u16) (mos7840_port->DcrRegOffset +
-                                                  1), Data);
+                status = mos7840_set_reg_sync(serial->port[i],
+                         (__u16) (mos7840_port->DcrRegOffset + 1), Data);
                 if (status < 0) {
                         dbg("Writing DCR1 failed status-0x%x\n", status);
                         break;
@@ -2586,22 +2535,17 @@ static int mos7840_startup(struct usb_serial *serial)
                         dbg("DCR1 Writing success status%d\n", status);
 
                 Data = 0x24;
-                status = 0;
-                status =
-                    mos7840_set_reg_sync(serial->port[i],
-                                         (__u16) (mos7840_port->DcrRegOffset +
-                                                  2), Data);
+                status = mos7840_set_reg_sync(serial->port[i],
+                         (__u16) (mos7840_port->DcrRegOffset + 2), Data);
                 if (status < 0) {
                         dbg("Writing DCR2 failed status-0x%x\n", status);
                         break;
                 } else
                         dbg("DCR2 Writing success status%d\n", status);
 
-                // write values in clkstart0x0 and clkmulti 0x20
+                /* write values in clkstart0x0 and clkmulti 0x20 */
                 Data = 0x0;
-                status = 0;
-                status =
-                    mos7840_set_reg_sync(serial->port[i],
+                status = mos7840_set_reg_sync(serial->port[i],
                                          CLK_START_VALUE_REGISTER, Data);
                 if (status < 0) {
                         dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
@@ -2610,9 +2554,8 @@ static int mos7840_startup(struct usb_serial *serial)
                         dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status);
 
                 Data = 0x20;
-                status =
-                    mos7840_set_reg_sync(serial->port[i], CLK_MULTI_REGISTER,
-                                         Data);
+                status = mos7840_set_reg_sync(serial->port[i],
+                                        CLK_MULTI_REGISTER, Data);
                 if (status < 0) {
                         dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n",
                             status);
@@ -2621,11 +2564,10 @@ static int mos7840_startup(struct usb_serial *serial)
                         dbg("CLK_MULTI_REGISTER Writing success status%d\n",
                             status);
 
-                //write value 0x0 to scratchpad register
+                /* write value 0x0 to scratchpad register */
                 Data = 0x00;
-                status =
-                    mos7840_set_uart_reg(serial->port[i], SCRATCH_PAD_REGISTER,
-                                         Data);
+                status = mos7840_set_uart_reg(serial->port[i],
+                                                SCRATCH_PAD_REGISTER, Data);
                 if (status < 0) {
                         dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x\n",
                             status);
@@ -2634,21 +2576,17 @@ static int mos7840_startup(struct usb_serial *serial)
                         dbg("SCRATCH_PAD_REGISTER Writing success status%d\n",
                             status);
 
-                //Zero Length flag register
+                /* Zero Length flag register */
                 if ((mos7840_port->port_num != 1)
                     && (serial->num_ports == 2)) {
 
                         Data = 0xff;
-                        status = 0;
                         status = mos7840_set_reg_sync(serial->port[i],
-                                                      (__u16) (ZLP_REG1 +
-                                                               ((__u16)
-                                                                mos7840_port->
-                                                                port_num)),
-                                                      Data);
+                                      (__u16) (ZLP_REG1 +
+                                      ((__u16)mos7840_port->port_num)), Data);
                         dbg("ZLIP offset%x\n",
                             (__u16) (ZLP_REG1 +
-                                     ((__u16) mos7840_port->port_num)));
+                                        ((__u16) mos7840_port->port_num)));
                         if (status < 0) {
                                 dbg("Writing ZLP_REG%d failed status-0x%x\n",
                                     i + 2, status);
@@ -2658,13 +2596,9 @@ static int mos7840_startup(struct usb_serial *serial)
                                     i + 2, status);
                 } else {
                         Data = 0xff;
-                        status = 0;
                         status = mos7840_set_reg_sync(serial->port[i],
-                                                      (__u16) (ZLP_REG1 +
-                                                               ((__u16)
-                                                                mos7840_port->
-                                                                port_num) -
-                                                               0x1), Data);
+                              (__u16) (ZLP_REG1 +
+                              ((__u16)mos7840_port->port_num) - 0x1), Data);
                         dbg("ZLIP offset%x\n",
                             (__u16) (ZLP_REG1 +
                                      ((__u16) mos7840_port->port_num) - 0x1));
@@ -2679,14 +2613,16 @@ static int mos7840_startup(struct usb_serial *serial)
                 }
                 mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
                 mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
-                mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
-                if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || !mos7840_port->dr) {
+                mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest),
+                                                                GFP_KERNEL);
+                if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf ||
+                                                        !mos7840_port->dr) {
                         status = -ENOMEM;
                         goto error;
                 }
         }
 
-        //Zero Length flag enable
+        /* Zero Length flag enable */
         Data = 0x0f;
         status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
         if (status < 0) {
@@ -2729,7 +2665,7 @@ static void mos7840_shutdown(struct usb_serial *serial)
                 return;
         }
 
-        /*      check for the ports to be closed,close the ports and disconnect         */
+        /* check for the ports to be closed,close the ports and disconnect */
 
         /* free private structure allocated for serial port  *
          * stop reads and writes on all ports                */
@@ -2810,20 +2746,12 @@ static int __init moschip7840_init(void)
 
         /* Register with the usb */
         retval = usb_register(&io_driver);
-
-        if (retval)
-                goto failed_usb_register;
-
         if (retval == 0) {
                 dbg("%s\n", "Leaving...");
                 return 0;
         }
-
-      failed_usb_register:
         usb_serial_deregister(&moschip7840_4port_device);
-
-      failed_port_device_register:
-
+failed_port_device_register:
         return retval;
 }