3 files changed, 4 insertions, 4 deletions

diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index f6b775e63ac8..5ac265dde423 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -78,7 +78,7 @@ config MTD_REDBOOT_DIRECTORY_BLOCK
           option.
 
           The option specifies which Flash sectors holds the RedBoot
-          partition table.  A zero or positive value gives an absolete
+          partition table.  A zero or positive value gives an absolute
           erase block number. A negative value specifies a number of
           sectors before the end of the device.
 
@@ -103,7 +103,7 @@ config MTD_CMDLINE_PARTS
         bool "Command line partition table parsing"
         depends on MTD_PARTITIONS = "y"
         ---help---
-          Allow generic configuration of the MTD paritition tables via the kernel
+          Allow generic configuration of the MTD partition tables via the kernel
           command line. Multiple flash resources are supported for hardware where
           different kinds of flash memory are available.
 
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index b06ef2bdd422..4e2bd37b3d8a 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -109,7 +109,7 @@ config MTD_TS5500
           mtd1 allows you to reprogram your BIOS. BE VERY CAREFUL.
 
           Note that jumper 3 ("Write Enable Drive A") must be set
-          otherwise detection won't succeeed.
+          otherwise detection won't succeed.
 
 config MTD_SBC_GXX
         tristate "CFI Flash device mapped on Arcom SBC-GXx boards"
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 4a1db31aef6a..b4a7086b219c 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -93,7 +93,7 @@ config MTD_NAND_S3C2410
           This enables the NAND flash controller on the S3C2410 and S3C2440
           SoCs
 
-          No board specfic support is done by this driver, each board
+          No board specific support is done by this driver, each board
           must advertise a platform_device for the driver to attach.
 
 config MTD_NAND_S3C2410_DEBUG