102 files changed, 1198 insertions, 1347 deletions
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 1423b0c0cd2e..a0a178dd189c 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -174,6 +174,15 @@ static int acpi_battery_get_property(struct power_supply *psy,
                break;
        case POWER_SUPPLY_PROP_CURRENT_NOW:
                val->intval = battery->current_now * 1000;
+                /* if power units are mW, convert to mA by
+                   dividing by current voltage (mV/1000) */
+                if (!battery->power_unit) {
+                        if (battery->voltage_now) {
+                                val->intval /= battery->voltage_now;
+                                val->intval *= 1000;
+                        } else
+                                val->intval = -1;
+                }
                break;
        case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
        case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index ea92bac42c53..09c69806c1fc 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -176,16 +176,6 @@ static int __init dmi_enable_osi_linux(const struct dmi_system_id *d)
        acpi_dmi_osi_linux(1, d);       /* enable */
        return 0;
 }
-static int __init dmi_disable_osi_linux(const struct dmi_system_id *d)
-{
-        acpi_dmi_osi_linux(0, d);       /* disable */
-        return 0;
-}
-static int __init dmi_unknown_osi_linux(const struct dmi_system_id *d)
-{
-        acpi_dmi_osi_linux(-1, d);      /* unknown */
-        return 0;
-}
 static int __init dmi_disable_osi_vista(const struct dmi_system_id *d)
 {
        printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
@@ -193,295 +183,21 @@ static int __init dmi_disable_osi_vista(const struct dmi_system_id *d)
        return 0;
 }
-/*
- * Most BIOS that invoke OSI(Linux) do nothing with it.
- * But some cause Linux to break.
- * Only a couple use it to make Linux run better.
- *
- * Thus, Linux should continue to disable OSI(Linux) by default,
- * should continue to discourage BIOS writers from using it, and
- * should whitelist the few existing systems that require it.
- *
- * If it appears clear a vendor isn't using OSI(Linux)
- * for anything constructive, blacklist them by name to disable
- * unnecessary dmesg warnings on all of their products.
- */
 static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
-        /*
-         * Disable OSI(Linux) warnings on all "Acer, inc."
-         *
-         * _OSI(Linux) disables the latest Windows BIOS code:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"),
-         * _OSI(Linux) effect unknown:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"),
-         */
-        /*
-         * note that dmi_check_system() uses strstr()
-         * to match sub-strings rather than !strcmp(),
-         * so "Acer" below matches "Acer, inc." above.
-         */
-        /*
-         * Disable OSI(Linux) warnings on all "Acer"
-         *
-         * _OSI(Linux) effect unknown:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"),
-         *
-         * _OSI(Linux) is a NOP:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"),
-         */
-        {
-        .callback = dmi_disable_osi_linux,
-        .ident = "Acer",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
-                },
-        },
-        /*
-         * Disable OSI(Linux) warnings on all "Apple Computer, Inc."
-         * Disable OSI(Linux) warnings on all "Apple Inc."
-         *
-         * _OSI(Linux) confirmed to be a NOP:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"),
-         * _OSI(Linux) effect unknown:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"),
-         */
-        {
-        .callback = dmi_disable_osi_linux,
-        .ident = "Apple",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
-                },
-        },
-        /*
-         * Disable OSI(Linux) warnings on all "BenQ"
-         *
-         * _OSI(Linux) confirmed to be a NOP:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Joybook S31"),
-         */
-        {
-        .callback = dmi_disable_osi_linux,
-        .ident = "BenQ",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "BenQ"),
-                },
-        },
-        /*
-         * Disable OSI(Linux) warnings on all "Clevo Co."
-         *
-         * _OSI(Linux) confirmed to be a NOP:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "M570RU"),
-         */
-        {
-        .callback = dmi_disable_osi_linux,
-        .ident = "Clevo",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
-                },
-        },
-        /*
-         * Disable OSI(Linux) warnings on all "COMPAL"
-         *
-         * _OSI(Linux) confirmed to be a NOP:
-         * DMI_MATCH(DMI_BOARD_NAME, "HEL8X"),
-         * _OSI(Linux) unknown effect:
-         * DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
-         */
-        {
-        .callback = dmi_disable_osi_linux,
-        .ident = "Compal",
-        .matches = {
-                     DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
-                },
-        },
-        { /* OSI(Linux) touches USB, unknown side-effect */
-        .callback = dmi_disable_osi_linux,
-        .ident = "Dell Dimension 5150",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM051"),
-                },
-        },
-        { /* OSI(Linux) is a NOP */
-        .callback = dmi_disable_osi_linux,
-        .ident = "Dell i1501",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"),
-                },
-        },
-        { /* OSI(Linux) effect unknown */
-        .callback = dmi_unknown_osi_linux,
-        .ident = "Dell Latitude D830",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"),
-                },
-        },
-        { /* OSI(Linux) effect unknown */
-        .callback = dmi_unknown_osi_linux,
-        .ident = "Dell OptiPlex GX620",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"),
-                },
-        },
-        { /* OSI(Linux) causes some USB initialization to not run */
-        .callback = dmi_unknown_osi_linux,
-        .ident = "Dell OptiPlex 755",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 755"),
-                },
-        },
-        { /* OSI(Linux) effect unknown */
-        .callback = dmi_unknown_osi_linux,
-        .ident = "Dell PE 1900",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"),
-                },
-        },
-        { /* OSI(Linux) is a NOP */
-        .callback = dmi_unknown_osi_linux,
-        .ident = "Dell PE 1950",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
-                },
-        },
-        { /* OSI(Linux) is a NOP */
-        .callback = dmi_disable_osi_linux,
-        .ident = "Dell PE R200",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R200"),
-                },
-        },
-        { /* OSI(Linux) touches USB */
-        .callback = dmi_disable_osi_linux,
-        .ident = "Dell PR 390",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"),
-                },
-        },
-        { /* OSI(Linux) touches USB */
-        .callback = dmi_unknown_osi_linux,
-        .ident = "Dell PR 390",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 690"),
-                },
-        },
-        { /* OSI(Linux) unknown - ASL looks benign, but may effect dock/SMM */
-        .callback = dmi_unknown_osi_linux,
-        .ident = "Dell PR M4300",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "Precision M4300"),
-                },
-        },
-        { /* OSI(Linux) is a NOP */
-        .callback = dmi_disable_osi_linux,
-        .ident = "Dell Vostro 1000",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "Vostro   1000"),
-                },
-        },
-        { /* OSI(Linux) effect unknown */
-        .callback = dmi_unknown_osi_linux,
-        .ident = "Dell PE SC440",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"),
-                },
-        },
-        { /* OSI(Linux) effect unknown */
-        .callback = dmi_unknown_osi_linux,
-        .ident = "Dialogue Flybook V5",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Dialogue Technology Corporation"),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "Flybook V5"),
-                },
-        },
-        /*
-         * Disable OSI(Linux) warnings on all "FUJITSU SIEMENS"
-         *
-         * _OSI(Linux) disables latest Windows BIOS code:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2510"),
-         * _OSI(Linux) confirmed to be a NOP:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
-         * _OSI(Linux) unknown effect:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"),
-         */
-        {
-        .callback = dmi_disable_osi_linux,
-        .ident = "Fujitsu Siemens",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
-                },
-        },
        {
        .callback = dmi_disable_osi_vista,
        .ident = "Fujitsu Siemens",
        .matches = {
                     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
+                     DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
                },
        },
        /*
-         * Disable OSI(Linux) warnings on all "Hewlett-Packard"
+         * BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
-         *
+         * Linux ignores it, except for the machines enumerated below.
-         * _OSI(Linux) confirmed to be a NOP:
-         * .ident = "HP Pavilion tx 1000"
-         * DMI_MATCH(DMI_BOARD_NAME, "30BF"),
-         * .ident = "HP Pavilion dv2000"
-         * DMI_MATCH(DMI_BOARD_NAME, "30B5"),
-         * .ident = "HP Pavilion dv5000",
-         * DMI_MATCH(DMI_BOARD_NAME, "30A7"),
-         * .ident = "HP Pavilion dv6300 30BC",
-         * DMI_MATCH(DMI_BOARD_NAME, "30BC"),
-         * .ident = "HP Pavilion dv6000",
-         * DMI_MATCH(DMI_BOARD_NAME, "30B7"),
-         * DMI_MATCH(DMI_BOARD_NAME, "30B8"),
-         * .ident = "HP Pavilion dv9000",
-         * DMI_MATCH(DMI_BOARD_NAME, "30B9"),
-         * .ident = "HP Pavilion dv9500",
-         * DMI_MATCH(DMI_BOARD_NAME, "30CB"),
-         * .ident = "HP/Compaq Presario C500",
-         * DMI_MATCH(DMI_BOARD_NAME, "30C6"),
-         * .ident = "HP/Compaq Presario F500",
-         * DMI_MATCH(DMI_BOARD_NAME, "30D3"),
-         * _OSI(Linux) unknown effect:
-         * .ident = "HP Pavilion dv6500",
-         * DMI_MATCH(DMI_BOARD_NAME, "30D0"),
         */
-        {
-        .callback = dmi_disable_osi_linux,
-        .ident = "Hewlett-Packard",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-                },
-        },
        /*
         * Lenovo has a mix of systems OSI(Linux) situations
         * and thus we can not wildcard the vendor.
@@ -519,113 +235,6 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
                     DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
                },
        },
-        {
-        .callback = dmi_disable_osi_linux,
-        .ident = "Lenovo 3000 V100",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-                     DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"),
-                },
-        },
-        {
-        .callback = dmi_disable_osi_linux,
-        .ident = "Lenovo 3000 N100",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-                     DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
-                },
-        },
-        /*
-         * Disable OSI(Linux) warnings on all "LG Electronics"
-         *
-         * _OSI(Linux) confirmed to be a NOP:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"),
-         * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
-         *
-         * unknown:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "S1-MDGDG"),
-         * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
-         */
-        {
-        .callback = dmi_disable_osi_linux,
-        .ident = "LG",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
-                },
-        },
-        /* NEC - OSI(Linux) effect unknown */
-        {
-        .callback = dmi_unknown_osi_linux,
-        .ident = "NEC VERSA M360",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "NEC Computers SAS"),
-                     DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"),
-                },
-        },
-        /* Panasonic */
-        {
-        .callback = dmi_unknown_osi_linux,
-        .ident = "Panasonic",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
-                        /* Toughbook CF-52 */
-                     DMI_MATCH(DMI_PRODUCT_NAME, "CF-52CCABVBG"),
-                },
-        },
-        /*
-         * Disable OSI(Linux) warnings on all "Samsung Electronics"
-         *
-         * OSI(Linux) disables PNP0C32 and other BIOS code for Windows:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "R40P/R41P"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"),
-         */
-        {
-        .callback = dmi_disable_osi_linux,
-        .ident = "Samsung",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-                },
-        },
-        /*
-         * Disable OSI(Linux) warnings on all "Sony Corporation"
-         *
-         * _OSI(Linux) is a NOP:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NR11S_S"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"),
-         * _OSI(Linux) unknown effect:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"),
-         */
-        {
-        .callback = dmi_disable_osi_linux,
-        .ident = "Sony",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-                },
-        },
-        /*
-         * Disable OSI(Linux) warnings on all "TOSHIBA"
-         *
-         * _OSI(Linux) breaks sound (bugzilla 7787):
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P100"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P105"),
-         * _OSI(Linux) is a NOP:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A100"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A210"),
-         * _OSI(Linux) unknown effect:
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A135"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A200"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P205"),
-         * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U305"),
-         */
-        {
-        .callback = dmi_disable_osi_linux,
-        .ident = "Toshiba",
-        .matches = {
-                     DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
-                },
-        },
        {}
 };
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index cf41f9fc24a7..30f3ef236ecb 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -219,7 +219,8 @@ static void gpe_transaction(struct acpi_ec *ec, u8 status)
        goto unlock;
 err:
        /* false interrupt, state didn't change */
-        ++ec->curr->irq_count;
+        if (in_interrupt())
+                ++ec->curr->irq_count;
 unlock:
        spin_unlock_irqrestore(&ec->curr_lock, flags);
 }
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 4be252145cb4..c8111424dcb8 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -35,7 +35,6 @@
 #include <linux/interrupt.h>
 #include <linux/kmod.h>
 #include <linux/delay.h>
-#include <linux/dmi.h>
 #include <linux/workqueue.h>
 #include <linux/nmi.h>
 #include <linux/acpi.h>
@@ -97,54 +96,44 @@ static DEFINE_SPINLOCK(acpi_res_lock);
 static char osi_additional_string[OSI_STRING_LENGTH_MAX];
 /*
- * "Ode to _OSI(Linux)"
+ * The story of _OSI(Linux)
 *
- * osi_linux -- Control response to BIOS _OSI(Linux) query.
+ * From pre-history through Linux-2.6.22,
+ * Linux responded TRUE upon a BIOS OSI(Linux) query.
 *
- * As Linux evolves, the features that it supports change.
+ * Unfortunately, reference BIOS writers got wind of this
- * So an OSI string such as "Linux" is not specific enough
+ * and put OSI(Linux) in their example code, quickly exposing
- * to be useful across multiple versions of Linux.  It
+ * this string as ill-conceived and opening the door to
- * doesn't identify any particular feature, interface,
+ * an un-bounded number of BIOS incompatibilities.
- * or even any particular version of Linux...
 *
- * Unfortunately, Linux-2.6.22 and earlier responded "yes"
+ * For example, OSI(Linux) was used on resume to re-POST a
- * to a BIOS _OSI(Linux) query.  When
+ * video card on one system, because Linux at that time
- * a reference mobile BIOS started using it, its use
+ * could not do a speedy restore in its native driver.
- * started to spread to many vendor platforms.
+ * But then upon gaining quick native restore capability,
- * As it is not supportable, we need to halt that spread.
+ * Linux has no way to tell the BIOS to skip the time-consuming
+ * POST -- putting Linux at a permanent performance disadvantage.
+ * On another system, the BIOS writer used OSI(Linux)
+ * to infer native OS support for IPMI!  On other systems,
+ * OSI(Linux) simply got in the way of Linux claiming to
+ * be compatible with other operating systems, exposing
+ * BIOS issues such as skipped device initialization.
 *
- * Today, most BIOS references to _OSI(Linux) are noise --
+ * So "Linux" turned out to be a really poor chose of
- * they have no functional effect and are just dead code
+ * OSI string, and from Linux-2.6.23 onward we respond FALSE.
- * carried over from the reference BIOS.
- *
- * The next most common case is that _OSI(Linux) harms Linux,
- * usually by causing the BIOS to follow paths that are
- * not tested during Windows validation.
- *
- * Finally, there is a short list of platforms
- * where OSI(Linux) benefits Linux.
- *
- * In Linux-2.6.23, OSI(Linux) is first disabled by default.
- * DMI is used to disable the dmesg warning about OSI(Linux)
- * on platforms where it is known to have no effect.
- * But a dmesg warning remains for systems where
- * we do not know if OSI(Linux) is good or bad for the system.
- * DMI is also used to enable OSI(Linux) for the machines
- * that are known to need it.
 *
 * BIOS writers should NOT query _OSI(Linux) on future systems.
- * It will be ignored by default, and to get Linux to
+ * Linux will complain on the console when it sees it, and return FALSE.
- * not ignore it will require a kernel source update to
+ * To get Linux to return TRUE for your system  will require
- * add a DMI entry, or a boot-time "acpi_osi=Linux" invocation.
+ * a kernel source update to add a DMI entry,
+ * or boot with "acpi_osi=Linux"
 */
-#define OSI_LINUX_ENABLE 0
 static struct osi_linux {
        unsigned int    enable:1;
        unsigned int    dmi:1;
        unsigned int    cmdline:1;
        unsigned int    known:1;
-} osi_linux = { OSI_LINUX_ENABLE, 0, 0, 0};
+} osi_linux = { 0, 0, 0, 0};
 static void __init acpi_request_region (struct acpi_generic_address *addr,
        unsigned int length, char *desc)
@@ -1296,34 +1285,6 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object)
        return (AE_OK);
 }
-/**
- *      acpi_dmi_dump - dump DMI slots needed for blacklist entry
- *
- *      Returns 0 on success
- */
-static int acpi_dmi_dump(void)
-{
-        if (!dmi_available)
-                return -1;
-        printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n",
-                dmi_get_system_info(DMI_SYS_VENDOR));
-        printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n",
-                dmi_get_system_info(DMI_PRODUCT_NAME));
-        printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n",
-                dmi_get_system_info(DMI_PRODUCT_VERSION));
-        printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n",
-                dmi_get_system_info(DMI_BOARD_NAME));
-        printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n",
-                dmi_get_system_info(DMI_BIOS_VENDOR));
-        printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n",
-                dmi_get_system_info(DMI_BIOS_DATE));
-        return 0;
-}
 /******************************************************************************
 *
 * FUNCTION:    acpi_os_validate_interface
@@ -1350,21 +1311,6 @@ acpi_os_validate_interface (char *interface)
                        osi_linux.cmdline ? " via cmdline" :
                        osi_linux.dmi ? " via DMI" : "");
-                if (!osi_linux.dmi) {
-                        if (acpi_dmi_dump())
-                                printk(KERN_NOTICE PREFIX
-                                        "[please extract dmidecode output]\n");
-                        printk(KERN_NOTICE PREFIX
-                                "Please send DMI info above to "
-                                "linux-acpi@vger.kernel.org\n");
-                }
-                if (!osi_linux.known && !osi_linux.cmdline) {
-                        printk(KERN_NOTICE PREFIX
-                                "If \"acpi_osi=%sLinux\" works better, "
-                                "please notify linux-acpi@vger.kernel.org\n",
-                                osi_linux.enable ? "!" : "");
-                }
                if (osi_linux.enable)
                        return AE_OK;
        }
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index bd5253ee5c85..39b7233c3485 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -751,16 +751,6 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
        if (!acpi_match_device_ids(device, button_device_ids))
                device->wakeup.flags.run_wake = 1;
-        /*
-         * Don't set Power button GPE as run_wake
-         * if Fixed Power button is used
-         */
-        if (!strcmp(device->pnp.hardware_id, "PNP0C0C") &&
-                !(acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON)) {
-                device->wakeup.flags.run_wake = 0;
-                device->wakeup.flags.valid = 0;
-        }
      end:
        if (ACPI_FAILURE(status))
                device->flags.wake_capable = 0;
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 80c0868d0480..28a691cc625e 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -90,6 +90,18 @@ void __init acpi_old_suspend_ordering(void)
        old_suspend_ordering = true;
 }
+/*
+ * According to the ACPI specification the BIOS should make sure that ACPI is
+ * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states.  Still,
+ * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
+ * on such systems during resume.  Unfortunately that doesn't help in
+ * particularly pathological cases in which SCI_EN has to be set directly on
+ * resume, although the specification states very clearly that this flag is
+ * owned by the hardware.  The set_sci_en_on_resume variable will be set in such
+ * cases.
+ */
+static bool set_sci_en_on_resume;
 /**
 *      acpi_pm_disable_gpes - Disable the GPEs.
 */
@@ -235,7 +247,11 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
        }
        /* If ACPI is not enabled by the BIOS, we need to enable it here. */
-        acpi_enable();
+        if (set_sci_en_on_resume)
+                acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1);
+        else
+                acpi_enable();
        /* Reprogram control registers and execute _BFS */
        acpi_leave_sleep_state_prep(acpi_state);
@@ -323,6 +339,12 @@ static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
        return 0;
 }
+static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d)
+{
+        set_sci_en_on_resume = true;
+        return 0;
+}
 static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
        {
        .callback = init_old_suspend_ordering,
@@ -340,6 +362,22 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
                DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
                },
        },
+        {
+        .callback = init_set_sci_en_on_resume,
+        .ident = "Apple MacBook 1,1",
+        .matches = {
+                DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+                DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
+                },
+        },
+        {
+        .callback = init_set_sci_en_on_resume,
+        .ident = "Apple MacMini 1,1",
+        .matches = {
+                DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+                DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+                },
+        },
        {},
 };
 #endif /* CONFIG_SUSPEND */
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index 66aac06f2ac5..25f531d892de 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -848,8 +848,6 @@ static int __init toshiba_acpi_init(void)
        ret = input_register_polled_device(toshiba_acpi.poll_dev);
        if (ret) {
                printk(MY_ERR "unable to register kill-switch input device\n");
-                rfkill_free(toshiba_acpi.rfk_dev);
-                toshiba_acpi.rfk_dev = NULL;
                toshiba_acpi_exit();
                return ret;
        }
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index e827be36ee8d..f844941089bb 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -259,34 +259,26 @@ acpi_evaluate_integer(acpi_handle handle,
                      struct acpi_object_list *arguments, unsigned long long *data)
 {
        acpi_status status = AE_OK;
-        union acpi_object *element;
+        union acpi_object element;
        struct acpi_buffer buffer = { 0, NULL };
        if (!data)
                return AE_BAD_PARAMETER;
-        element = kzalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL);
-        if (!element)
-                return AE_NO_MEMORY;
        buffer.length = sizeof(union acpi_object);
-        buffer.pointer = element;
+        buffer.pointer = &element;
        status = acpi_evaluate_object(handle, pathname, arguments, &buffer);
        if (ACPI_FAILURE(status)) {
                acpi_util_eval_error(handle, pathname, status);
-                kfree(element);
                return status;
        }
-        if (element->type != ACPI_TYPE_INTEGER) {
+        if (element.type != ACPI_TYPE_INTEGER) {
                acpi_util_eval_error(handle, pathname, AE_BAD_DATA);
-                kfree(element);
                return AE_BAD_DATA;
        }
-        *data = element->integer.value;
+        *data = element.integer.value;
-        kfree(element);
        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%llu]\n", *data));
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 12de1fdaa6c6..9364dc554257 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -2847,7 +2847,7 @@ static void do_cciss_request(struct request_queue *q)
                h->maxSG = seg;
 #ifdef CCISS_DEBUG
-        printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n",
+        printk(KERN_DEBUG "cciss: Submitting %lu sectors in %d segments\n",
               creq->nr_sectors, seg);
 #endif                          /* CCISS_DEBUG */
@@ -3197,7 +3197,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
        c->paddr = pci_resource_start(pdev, 0); /* addressing mode bits already removed */
 #ifdef CCISS_DEBUG
-        printk("address 0 = %x\n", c->paddr);
+        printk("address 0 = %lx\n", c->paddr);
 #endif                          /* CCISS_DEBUG */
        c->vaddr = remap_pci_mem(c->paddr, 0x250);
@@ -3224,7 +3224,8 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
 #endif                          /* CCISS_DEBUG */
        cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr);
 #ifdef CCISS_DEBUG
-        printk("cfg base address index = %x\n", cfg_base_addr_index);
+        printk("cfg base address index = %llx\n",
+                (unsigned long long)cfg_base_addr_index);
 #endif                          /* CCISS_DEBUG */
        if (cfg_base_addr_index == -1) {
                printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n");
@@ -3234,7 +3235,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
        cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET);
 #ifdef CCISS_DEBUG
-        printk("cfg offset = %x\n", cfg_offset);
+        printk("cfg offset = %llx\n", (unsigned long long)cfg_offset);
 #endif                          /* CCISS_DEBUG */
        c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
                                                       cfg_base_addr_index) +
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index 0f004b65ec03..03f95ec08f59 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -27,7 +27,7 @@
 static int uninorth_rev;
 static int is_u3;
-static char __devinitdata *aperture = NULL;
+static char *aperture = NULL;
 static int uninorth_fetch_size(void)
 {
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 44e5d60f517e..4b10770fa937 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -3739,7 +3739,7 @@ static int stli_getbrdnr(void)
 *      do is go probing around in the usual places hoping we can find it.
 */
-static int stli_findeisabrds(void)
+static int __init stli_findeisabrds(void)
 {
        struct stlibrd *brdp;
        unsigned int iobase, eid, i;
@@ -3935,7 +3935,7 @@ static struct stlibrd *stli_allocbrd(void)
 *      can find.
 */
-static int stli_initbrds(void)
+static int __init stli_initbrds(void)
 {
        struct stlibrd *brdp, *nxtbrdp;
        struct stlconf conf;
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index b6ad3ac5916e..24607669a52b 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1357,7 +1357,7 @@ static int hw_supports(struct device *dev, __be32 desc_hdr_template)
        return ret;
 }
-static int __devexit talitos_remove(struct of_device *ofdev)
+static int talitos_remove(struct of_device *ofdev)
 {
        struct device *dev = &ofdev->dev;
        struct talitos_private *priv = dev_get_drvdata(dev);
@@ -1622,7 +1622,7 @@ static struct of_platform_driver talitos_driver = {
        .name = "talitos",
        .match_table = talitos_match,
        .probe = talitos_probe,
-        .remove = __devexit_p(talitos_remove),
+        .remove = talitos_remove,
 };
 static int __init talitos_init(void)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index faa1cc66e9cf..82020abc329e 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1134,7 +1134,7 @@ static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
                        continue;
                is_out = test_bit(FLAG_IS_OUT, &gdesc->flags);
-                seq_printf(s, " gpio-%-3d (%-12s) %s %s",
+                seq_printf(s, " gpio-%-3d (%-20.20s) %s %s",
                        gpio, gdesc->label,
                        is_out ? "out" : "in ",
                        chip->get
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 3ab1e9cc4692..996097acb5e7 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -305,6 +305,8 @@ static void drm_cleanup(struct drm_device * dev)
                return;
        }
+        drm_vblank_cleanup(dev);
        drm_lastclose(dev);
        if (drm_core_has_MTRR(dev) && drm_core_has_AGP(dev) &&
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 15c8dabc3e97..1e787f894b3c 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -94,7 +94,7 @@ static void vblank_disable_fn(unsigned long arg)
        }
 }
-static void drm_vblank_cleanup(struct drm_device *dev)
+void drm_vblank_cleanup(struct drm_device *dev)
 {
        /* Bail if the driver didn't call drm_vblank_init() */
        if (dev->num_crtcs == 0)
@@ -278,8 +278,6 @@ int drm_irq_uninstall(struct drm_device * dev)
        free_irq(dev->pdev->irq, dev);
-        drm_vblank_cleanup(dev);
        return 0;
 }
 EXPORT_SYMBOL(drm_irq_uninstall);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 0d215e38606a..ba89b42f790a 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -856,6 +856,13 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
        spin_lock_init(&dev_priv->user_irq_lock);
+        ret = drm_vblank_init(dev, I915_NUM_PIPE);
+        if (ret) {
+                (void) i915_driver_unload(dev);
+                return ret;
+        }
        return ret;
 }
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ef1c0b8f8d07..0a4f39b9a0ec 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -47,6 +47,8 @@ enum pipe {
        PIPE_B,
 };
+#define I915_NUM_PIPE   2
 /* Interface history:
 *
 * 1.1: Original.
@@ -132,6 +134,7 @@ typedef struct drm_i915_private {
        int user_irq_refcount;
        /** Cached value of IMR to avoid reads in updating the bitfield */
        u32 irq_mask_reg;
+        u32 pipestat[2];
        int tex_lru_log_granularity;
        int allow_batchbuffer;
@@ -147,6 +150,7 @@ typedef struct drm_i915_private {
        u32 saveDSPBCNTR;
        u32 saveDSPARB;
        u32 saveRENDERSTANDBY;
+        u32 saveHWS;
        u32 savePIPEACONF;
        u32 savePIPEBCONF;
        u32 savePIPEASRC;
@@ -446,6 +450,13 @@ extern int i915_vblank_swap(struct drm_device *dev, void *data,
                            struct drm_file *file_priv);
 extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask);
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
 /* i915_mem.c */
 extern int i915_mem_alloc(struct drm_device *dev, void *data,
                          struct drm_file *file_priv);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 6b4a2bd20640..54bb0d0e49b8 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -31,6 +31,8 @@
 #include "i915_drv.h"
 #include <linux/swap.h>
+#define I915_GEM_GPU_DOMAINS    (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
 static int
 i915_gem_object_set_domain(struct drm_gem_object *obj,
                            uint32_t read_domains,
@@ -83,20 +85,14 @@ int
 i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
                            struct drm_file *file_priv)
 {
-        drm_i915_private_t *dev_priv = dev->dev_private;
        struct drm_i915_gem_get_aperture *args = data;
-        struct drm_i915_gem_object *obj_priv;
        if (!(dev->driver->driver_features & DRIVER_GEM))
                return -ENODEV;
        args->aper_size = dev->gtt_total;
-        args->aper_available_size = args->aper_size;
+        args->aper_available_size = (args->aper_size -
+                                     atomic_read(&dev->pin_memory));
-        list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
-                if (obj_priv->pin_count > 0)
-                        args->aper_available_size -= obj_priv->obj->size;
-        }
        return 0;
 }
@@ -1870,17 +1866,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
        for (i = 0; i < args->buffer_count; i++) {
                struct drm_gem_object *obj = object_list[i];
-                struct drm_i915_gem_object *obj_priv = obj->driver_private;
-                if (obj_priv->gtt_space == NULL) {
-                        /* We evicted the buffer in the process of validating
-                         * our set of buffers in.  We could try to recover by
-                         * kicking them everything out and trying again from
-                         * the start.
-                         */
-                        ret = -ENOMEM;
-                        goto err;
-                }
                /* make sure all previous memory operations have passed */
                ret = i915_gem_object_set_domain(obj,
@@ -2299,29 +2284,52 @@ i915_gem_idle(struct drm_device *dev)
        i915_gem_retire_requests(dev);
-        /* Active and flushing should now be empty as we've
+        if (!dev_priv->mm.wedged) {
-         * waited for a sequence higher than any pending execbuffer
+                /* Active and flushing should now be empty as we've
-         */
+                 * waited for a sequence higher than any pending execbuffer
-        BUG_ON(!list_empty(&dev_priv->mm.active_list));
+                 */
-        BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
+                WARN_ON(!list_empty(&dev_priv->mm.active_list));
+                WARN_ON(!list_empty(&dev_priv->mm.flushing_list));
+                /* Request should now be empty as we've also waited
+                 * for the last request in the list
+                 */
+                WARN_ON(!list_empty(&dev_priv->mm.request_list));
+        }
-        /* Request should now be empty as we've also waited
+        /* Empty the active and flushing lists to inactive.  If there's
-         * for the last request in the list
+         * anything left at this point, it means that we're wedged and
+         * nothing good's going to happen by leaving them there.  So strip
+         * the GPU domains and just stuff them onto inactive.
         */
-        BUG_ON(!list_empty(&dev_priv->mm.request_list));
+        while (!list_empty(&dev_priv->mm.active_list)) {
+                struct drm_i915_gem_object *obj_priv;
-        /* Move all buffers out of the GTT. */
+                obj_priv = list_first_entry(&dev_priv->mm.active_list,
+                                            struct drm_i915_gem_object,
+                                            list);
+                obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+                i915_gem_object_move_to_inactive(obj_priv->obj);
+        }
+        while (!list_empty(&dev_priv->mm.flushing_list)) {
+                struct drm_i915_gem_object *obj_priv;
+                obj_priv = list_first_entry(&dev_priv->mm.active_list,
+                                            struct drm_i915_gem_object,
+                                            list);
+                obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+                i915_gem_object_move_to_inactive(obj_priv->obj);
+        }
+        /* Move all inactive buffers out of the GTT. */
        ret = i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list);
+        WARN_ON(!list_empty(&dev_priv->mm.inactive_list));
        if (ret) {
                mutex_unlock(&dev->struct_mutex);
                return ret;
        }
-        BUG_ON(!list_empty(&dev_priv->mm.active_list));
-        BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
-        BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
-        BUG_ON(!list_empty(&dev_priv->mm.request_list));
        i915_gem_cleanup_ringbuffer(dev);
        mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 82752d6177a4..fe3d9cc72bf5 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -33,11 +33,23 @@
 #define MAX_NOPID ((u32)~0)
-/** These are the interrupts used by the driver */
+/**
-#define I915_INTERRUPT_ENABLE_MASK (I915_USER_INTERRUPT |               \
+ * Interrupts that are always left unmasked.
-                                    I915_ASLE_INTERRUPT |               \
+ *
-                                    I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
+ * Since pipe events are edge-triggered from the PIPESTAT register to IIR,
-                                    I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+ * we leave them always unmasked in IMR and then control enabling them through
+ * PIPESTAT alone.
+ */
+#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
+                                   I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |  \
+                                   I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+/** Interrupts that we mask and unmask at runtime. */
+#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
+/** These are all of the interrupts used by the driver */
+#define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \
+                                    I915_INTERRUPT_ENABLE_VAR)
 void
 i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
@@ -59,6 +71,41 @@ i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
        }
 }
+static inline u32
+i915_pipestat(int pipe)
+{
+        if (pipe == 0)
+                return PIPEASTAT;
+        if (pipe == 1)
+                return PIPEBSTAT;
+        BUG_ON(1);
+}
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+        if ((dev_priv->pipestat[pipe] & mask) != mask) {
+                u32 reg = i915_pipestat(pipe);
+                dev_priv->pipestat[pipe] |= mask;
+                /* Enable the interrupt, clear any pending status */
+                I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16));
+                (void) I915_READ(reg);
+        }
+}
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+        if ((dev_priv->pipestat[pipe] & mask) != 0) {
+                u32 reg = i915_pipestat(pipe);
+                dev_priv->pipestat[pipe] &= ~mask;
+                I915_WRITE(reg, dev_priv->pipestat[pipe]);
+                (void) I915_READ(reg);
+        }
+}
 /**
 * i915_pipe_enabled - check if a pipe is enabled
 * @dev: DRM device
@@ -121,80 +168,102 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 {
        struct drm_device *dev = (struct drm_device *) arg;
        drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-        u32 iir;
+        u32 iir, new_iir;
        u32 pipea_stats, pipeb_stats;
+        u32 vblank_status;
+        u32 vblank_enable;
        int vblank = 0;
+        unsigned long irqflags;
+        int irq_received;
+        int ret = IRQ_NONE;
        atomic_inc(&dev_priv->irq_received);
-        if (dev->pdev->msi_enabled)
-                I915_WRITE(IMR, ~0);
        iir = I915_READ(IIR);
-        if (iir == 0) {
+        if (IS_I965G(dev)) {
-                if (dev->pdev->msi_enabled) {
+                vblank_status = I915_START_VBLANK_INTERRUPT_STATUS;
-                        I915_WRITE(IMR, dev_priv->irq_mask_reg);
+                vblank_enable = PIPE_START_VBLANK_INTERRUPT_ENABLE;
-                        (void) I915_READ(IMR);
+        } else {
-                }
+                vblank_status = I915_VBLANK_INTERRUPT_STATUS;
-                return IRQ_NONE;
+                vblank_enable = I915_VBLANK_INTERRUPT_ENABLE;
        }
-        /*
+        for (;;) {
-         * Clear the PIPE(A|B)STAT regs before the IIR otherwise
+                irq_received = iir != 0;
-         * we may get extra interrupts.
-         */
+                /* Can't rely on pipestat interrupt bit in iir as it might
-        if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) {
+                 * have been cleared after the pipestat interrupt was received.
+                 * It doesn't set the bit in iir again, but it still produces
+                 * interrupts (for non-MSI).
+                 */
+                spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
                pipea_stats = I915_READ(PIPEASTAT);
-                if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A))
+                pipeb_stats = I915_READ(PIPEBSTAT);
-                        pipea_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
+                /*
-                                         PIPE_VBLANK_INTERRUPT_ENABLE);
+                 * Clear the PIPE(A|B)STAT regs before the IIR
-                else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
+                 */
-                                        PIPE_VBLANK_INTERRUPT_STATUS)) {
+                if (pipea_stats & 0x8000ffff) {
+                        I915_WRITE(PIPEASTAT, pipea_stats);
+                        irq_received = 1;
+                }
+                if (pipeb_stats & 0x8000ffff) {
+                        I915_WRITE(PIPEBSTAT, pipeb_stats);
+                        irq_received = 1;
+                }
+                spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
+                if (!irq_received)
+                        break;
+                ret = IRQ_HANDLED;
+                I915_WRITE(IIR, iir);
+                new_iir = I915_READ(IIR); /* Flush posted writes */
+                if (dev_priv->sarea_priv)
+                        dev_priv->sarea_priv->last_dispatch =
+                                READ_BREADCRUMB(dev_priv);
+                if (iir & I915_USER_INTERRUPT) {
+                        dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
+                        DRM_WAKEUP(&dev_priv->irq_queue);
+                }
+                if (pipea_stats & vblank_status) {
                        vblank++;
                        drm_handle_vblank(dev, 0);
                }
-                I915_WRITE(PIPEASTAT, pipea_stats);
+                if (pipeb_stats & vblank_status) {
-        }
-        if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) {
-                pipeb_stats = I915_READ(PIPEBSTAT);
-                /* Ack the event */
-                I915_WRITE(PIPEBSTAT, pipeb_stats);
-                /* The vblank interrupt gets enabled even if we didn't ask for
-                   it, so make sure it's shut down again */
-                if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B))
-                        pipeb_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
-                                         PIPE_VBLANK_INTERRUPT_ENABLE);
-                else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
-                                        PIPE_VBLANK_INTERRUPT_STATUS)) {
                        vblank++;
                        drm_handle_vblank(dev, 1);
                }
-                if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS)
+                if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
+                    (iir & I915_ASLE_INTERRUPT))
                        opregion_asle_intr(dev);
-                I915_WRITE(PIPEBSTAT, pipeb_stats);
-        }
-        I915_WRITE(IIR, iir);
-        if (dev->pdev->msi_enabled)
-                I915_WRITE(IMR, dev_priv->irq_mask_reg);
-        (void) I915_READ(IIR); /* Flush posted writes */
-        if (dev_priv->sarea_priv)
-                dev_priv->sarea_priv->last_dispatch =
-                        READ_BREADCRUMB(dev_priv);
-        if (iir & I915_USER_INTERRUPT) {
+                /* With MSI, interrupts are only generated when iir
-                dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
+                 * transitions from zero to nonzero.  If another bit got
-                DRM_WAKEUP(&dev_priv->irq_queue);
+                 * set while we were handling the existing iir bits, then
+                 * we would never get another interrupt.
+                 *
+                 * This is fine on non-MSI as well, as if we hit this path
+                 * we avoid exiting the interrupt handler only to generate
+                 * another one.
+                 *
+                 * Note that for MSI this could cause a stray interrupt report
+                 * if an interrupt landed in the time between writing IIR and
+                 * the posting read.  This should be rare enough to never
+                 * trigger the 99% of 100,000 interrupts test for disabling
+                 * stray interrupts.
+                 */
+                iir = new_iir;
        }
-        if (iir & I915_ASLE_INTERRUPT)
+        return ret;
-                opregion_asle_intr(dev);
-        return IRQ_HANDLED;
 }
 static int i915_emit_irq(struct drm_device * dev)
@@ -330,48 +399,16 @@ int i915_irq_wait(struct drm_device *dev, void *data,
 int i915_enable_vblank(struct drm_device *dev, int pipe)
 {
        drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-        u32     pipestat_reg = 0;
-        u32     pipestat;
-        u32     interrupt = 0;
        unsigned long irqflags;
-        switch (pipe) {
-        case 0:
-                pipestat_reg = PIPEASTAT;
-                interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
-                break;
-        case 1:
-                pipestat_reg = PIPEBSTAT;
-                interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
-                break;
-        default:
-                DRM_ERROR("tried to enable vblank on non-existent pipe %d\n",
-                          pipe);
-                return 0;
-        }
        spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
-        /* Enabling vblank events in IMR comes before PIPESTAT write, or
-         * there's a race where the PIPESTAT vblank bit gets set to 1, so
-         * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in
-         * ISR flashes to 1, but the IIR bit doesn't get set to 1 because
-         * IMR masks it.  It doesn't ever get set after we clear the masking
-         * in IMR because the ISR bit is edge, not level-triggered, on the
-         * OR of PIPESTAT bits.
-         */
-        i915_enable_irq(dev_priv, interrupt);
-        pipestat = I915_READ(pipestat_reg);
        if (IS_I965G(dev))
-                pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE;
+                i915_enable_pipestat(dev_priv, pipe,
+                                     PIPE_START_VBLANK_INTERRUPT_ENABLE);
        else
-                pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE;
+                i915_enable_pipestat(dev_priv, pipe,
-        /* Clear any stale interrupt status */
+                                     PIPE_VBLANK_INTERRUPT_ENABLE);
-        pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
-                     PIPE_VBLANK_INTERRUPT_STATUS);
-        I915_WRITE(pipestat_reg, pipestat);
-        (void) I915_READ(pipestat_reg); /* Posting read */
        spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
        return 0;
 }
@@ -381,37 +418,12 @@ int i915_enable_vblank(struct drm_device *dev, int pipe)
 void i915_disable_vblank(struct drm_device *dev, int pipe)
 {
        drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-        u32     pipestat_reg = 0;
-        u32     pipestat;
-        u32     interrupt = 0;
        unsigned long irqflags;
-        switch (pipe) {
-        case 0:
-                pipestat_reg = PIPEASTAT;
-                interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
-                break;
-        case 1:
-                pipestat_reg = PIPEBSTAT;
-                interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
-                break;
-        default:
-                DRM_ERROR("tried to disable vblank on non-existent pipe %d\n",
-                          pipe);
-                return;
-                break;
-        }
        spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
-        i915_disable_irq(dev_priv, interrupt);
+        i915_disable_pipestat(dev_priv, pipe,
-        pipestat = I915_READ(pipestat_reg);
+                              PIPE_VBLANK_INTERRUPT_ENABLE |
-        pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
+                              PIPE_START_VBLANK_INTERRUPT_ENABLE);
-                      PIPE_VBLANK_INTERRUPT_ENABLE);
-        /* Clear any stale interrupt status */
-        pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
-                     PIPE_VBLANK_INTERRUPT_STATUS);
-        I915_WRITE(pipestat_reg, pipestat);
-        (void) I915_READ(pipestat_reg); /* Posting read */
        spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 }
@@ -476,32 +488,35 @@ void i915_driver_irq_preinstall(struct drm_device * dev)
        drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
        I915_WRITE(HWSTAM, 0xeffe);
+        I915_WRITE(PIPEASTAT, 0);
+        I915_WRITE(PIPEBSTAT, 0);
        I915_WRITE(IMR, 0xffffffff);
        I915_WRITE(IER, 0x0);
+        (void) I915_READ(IER);
 }
 int i915_driver_irq_postinstall(struct drm_device *dev)
 {
        drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-        int ret, num_pipes = 2;
-        /* Set initial unmasked IRQs to just the selected vblank pipes. */
-        dev_priv->irq_mask_reg = ~0;
-        ret = drm_vblank_init(dev, num_pipes);
-        if (ret)
-                return ret;
        dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
-        dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
-        dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
        dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
-        dev_priv->irq_mask_reg &= I915_INTERRUPT_ENABLE_MASK;
+        /* Unmask the interrupts that we always want on. */
+        dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX;
+        dev_priv->pipestat[0] = 0;
+        dev_priv->pipestat[1] = 0;
+        /* Disable pipe interrupt enables, clear pending pipe status */
+        I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
+        I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
+        /* Clear pending interrupt status */
+        I915_WRITE(IIR, I915_READ(IIR));
-        I915_WRITE(IMR, dev_priv->irq_mask_reg);
        I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK);
+        I915_WRITE(IMR, dev_priv->irq_mask_reg);
        (void) I915_READ(IER);
        opregion_enable_asle(dev);
@@ -513,7 +528,6 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 void i915_driver_irq_uninstall(struct drm_device * dev)
 {
        drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-        u32 temp;
        if (!dev_priv)
                return;
@@ -521,13 +535,12 @@ void i915_driver_irq_uninstall(struct drm_device * dev)
        dev_priv->vblank_pipe = 0;
        I915_WRITE(HWSTAM, 0xffffffff);
+        I915_WRITE(PIPEASTAT, 0);
+        I915_WRITE(PIPEBSTAT, 0);
        I915_WRITE(IMR, 0xffffffff);
        I915_WRITE(IER, 0x0);
-        temp = I915_READ(PIPEASTAT);
+        I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
-        I915_WRITE(PIPEASTAT, temp);
+        I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
-        temp = I915_READ(PIPEBSTAT);
+        I915_WRITE(IIR, I915_READ(IIR));
-        I915_WRITE(PIPEBSTAT, temp);
-        temp = I915_READ(IIR);
-        I915_WRITE(IIR, temp);
 }
diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c
index 1787a0c7e3ab..13ae731a33db 100644
--- a/drivers/gpu/drm/i915/i915_opregion.c
+++ b/drivers/gpu/drm/i915/i915_opregion.c
@@ -235,17 +235,15 @@ void opregion_enable_asle(struct drm_device *dev)
        struct opregion_asle *asle = dev_priv->opregion.asle;
        if (asle) {
-                u32 pipeb_stats = I915_READ(PIPEBSTAT);
                if (IS_MOBILE(dev)) {
-                        /* Many devices trigger events with a write to the
+                        unsigned long irqflags;
-                           legacy backlight controller, so we need to ensure
-                           that it's able to generate interrupts */
+                        spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
-                        I915_WRITE(PIPEBSTAT, pipeb_stats |=
+                        i915_enable_pipestat(dev_priv, 1,
-                                   I915_LEGACY_BLC_EVENT_ENABLE);
+                                             I915_LEGACY_BLC_EVENT_ENABLE);
-                        i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT |
+                        spin_unlock_irqrestore(&dev_priv->user_irq_lock,
-                                        I915_DISPLAY_PIPE_B_EVENT_INTERRUPT);
+                                               irqflags);
-                } else
+                }
-                        i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT);
                asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN |
                        ASLE_PFMB_EN;
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 5ddc6e595c0c..5d84027ee8f3 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -244,6 +244,9 @@ int i915_save_state(struct drm_device *dev)
        if (IS_I965G(dev) && IS_MOBILE(dev))
                dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
+        /* Hardware status page */
+        dev_priv->saveHWS = I915_READ(HWS_PGA);
        /* Display arbitration control */
        dev_priv->saveDSPARB = I915_READ(DSPARB);
@@ -373,6 +376,9 @@ int i915_restore_state(struct drm_device *dev)
        if (IS_I965G(dev) && IS_MOBILE(dev))
                I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
+        /* Hardware status page */
+        I915_WRITE(HWS_PGA, dev_priv->saveHWS);
        /* Display arbitration */
        I915_WRITE(DSPARB, dev_priv->saveDSPARB);
diff --git a/drivers/gpu/drm/mga/mga_dma.c b/drivers/gpu/drm/mga/mga_dma.c
index c1d12dbfa8d8..b49c5ff29585 100644
--- a/drivers/gpu/drm/mga/mga_dma.c
+++ b/drivers/gpu/drm/mga/mga_dma.c
@@ -396,6 +396,7 @@ int mga_freelist_put(struct drm_device * dev, struct drm_buf * buf)
 int mga_driver_load(struct drm_device * dev, unsigned long flags)
 {
        drm_mga_private_t *dev_priv;
+        int ret;
        dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
        if (!dev_priv)
@@ -415,6 +416,13 @@ int mga_driver_load(struct drm_device * dev, unsigned long flags)
        dev->types[7] = _DRM_STAT_PRIMARY;
        dev->types[8] = _DRM_STAT_SECONDARY;
+        ret = drm_vblank_init(dev, 1);
+        if (ret) {
+                (void) mga_driver_unload(dev);
+                return ret;
+        }
        return 0;
 }
diff --git a/drivers/gpu/drm/mga/mga_irq.c b/drivers/gpu/drm/mga/mga_irq.c
index bab42f41188b..daa6041a483a 100644
--- a/drivers/gpu/drm/mga/mga_irq.c
+++ b/drivers/gpu/drm/mga/mga_irq.c
@@ -152,11 +152,6 @@ void mga_driver_irq_preinstall(struct drm_device * dev)
 int mga_driver_irq_postinstall(struct drm_device *dev)
 {
        drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
-        int ret;
-        ret = drm_vblank_init(dev, 1);
-        if (ret)
-                return ret;
        DRM_INIT_WAITQUEUE(&dev_priv->fence_queue);
diff --git a/drivers/gpu/drm/r128/r128_drv.c b/drivers/gpu/drm/r128/r128_drv.c
index 3265d53ba91f..601f4c0e5da5 100644
--- a/drivers/gpu/drm/r128/r128_drv.c
+++ b/drivers/gpu/drm/r128/r128_drv.c
@@ -45,6 +45,7 @@ static struct drm_driver driver = {
            DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG |
            DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED,
        .dev_priv_size = sizeof(drm_r128_buf_priv_t),
+        .load = r128_driver_load,
        .preclose = r128_driver_preclose,
        .lastclose = r128_driver_lastclose,
        .get_vblank_counter = r128_get_vblank_counter,
@@ -84,6 +85,11 @@ static struct drm_driver driver = {
        .patchlevel = DRIVER_PATCHLEVEL,
 };
+int r128_driver_load(struct drm_device * dev, unsigned long flags)
+{
+        return drm_vblank_init(dev, 1);
+}
 static int __init r128_init(void)
 {
        driver.num_ioctls = r128_max_ioctl;
diff --git a/drivers/gpu/drm/r128/r128_drv.h b/drivers/gpu/drm/r128/r128_drv.h
index 5898b274279d..797a26c42dab 100644
--- a/drivers/gpu/drm/r128/r128_drv.h
+++ b/drivers/gpu/drm/r128/r128_drv.h
@@ -159,6 +159,7 @@ extern void r128_driver_irq_preinstall(struct drm_device * dev);
 extern int r128_driver_irq_postinstall(struct drm_device *dev);
 extern void r128_driver_irq_uninstall(struct drm_device * dev);
 extern void r128_driver_lastclose(struct drm_device * dev);
+extern int r128_driver_load(struct drm_device * dev, unsigned long flags);
 extern void r128_driver_preclose(struct drm_device * dev,
                                 struct drm_file *file_priv);
diff --git a/drivers/gpu/drm/r128/r128_irq.c b/drivers/gpu/drm/r128/r128_irq.c
index d7349012a680..69810fb8ac49 100644
--- a/drivers/gpu/drm/r128/r128_irq.c
+++ b/drivers/gpu/drm/r128/r128_irq.c
@@ -102,7 +102,7 @@ void r128_driver_irq_preinstall(struct drm_device * dev)
 int r128_driver_irq_postinstall(struct drm_device *dev)
 {
-        return drm_vblank_init(dev, 1);
+        return 0;
 }
 void r128_driver_irq_uninstall(struct drm_device * dev)
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index abdc1ae38467..dcebb4bee7aa 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -1757,6 +1757,12 @@ int radeon_driver_load(struct drm_device *dev, unsigned long flags)
        if (ret != 0)
                return ret;
+        ret = drm_vblank_init(dev, 2);
+        if (ret) {
+                radeon_driver_unload(dev);
+                return ret;
+        }
        DRM_DEBUG("%s card detected\n",
                  ((dev_priv->flags & RADEON_IS_AGP) ? "AGP" : (((dev_priv->flags & RADEON_IS_PCIE) ? "PCIE" : "PCI"))));
        return ret;
diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c
index 5079f7054a2f..97c0599fdb1e 100644
--- a/drivers/gpu/drm/radeon/radeon_irq.c
+++ b/drivers/gpu/drm/radeon/radeon_irq.c
@@ -337,15 +337,10 @@ int radeon_driver_irq_postinstall(struct drm_device *dev)
 {
        drm_radeon_private_t *dev_priv =
            (drm_radeon_private_t *) dev->dev_private;
-        int ret;
        atomic_set(&dev_priv->swi_emitted, 0);
        DRM_INIT_WAITQUEUE(&dev_priv->swi_queue);
-        ret = drm_vblank_init(dev, 2);
-        if (ret)
-                return ret;
        dev->max_vblank_count = 0x001fffff;
        radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1);
diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c
index 665d319b927b..c248c1d37268 100644
--- a/drivers/gpu/drm/via/via_irq.c
+++ b/drivers/gpu/drm/via/via_irq.c
@@ -314,7 +314,6 @@ int via_driver_irq_postinstall(struct drm_device *dev)
        if (!dev_priv)
                return -EINVAL;
-        drm_vblank_init(dev, 1);
        status = VIA_READ(VIA_REG_INTERRUPT);
        VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL
                  | dev_priv->irq_enable_mask);
diff --git a/drivers/gpu/drm/via/via_map.c b/drivers/gpu/drm/via/via_map.c
index a967556be014..2c4f0b485792 100644
--- a/drivers/gpu/drm/via/via_map.c
+++ b/drivers/gpu/drm/via/via_map.c
@@ -107,8 +107,17 @@ int via_driver_load(struct drm_device *dev, unsigned long chipset)
        ret = drm_sman_init(&dev_priv->sman, 2, 12, 8);
        if (ret) {
                drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER);
+                return ret;
        }
-        return ret;
+        ret = drm_vblank_init(dev, 1);
+        if (ret) {
+                drm_sman_takedown(&dev_priv->sman);
+                drm_free(dev_priv, sizeof(drm_via_private_t), DRM_MEM_DRIVER);
+                return ret;
+        }
+        return 0;
 }
 int via_driver_unload(struct drm_device *dev)
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 488e45cd43d7..f7dce8b9f64b 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -128,6 +128,9 @@ static const char* temperature_sensors_sets[][36] = {
 /* Set 13: iMac 8,1 */
        { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TG0P", "TH0P",
          "TL0P", "TO0P", "TW0P", "Tm0P", "Tp0P", NULL },
+/* Set 14: iMac 6,1 */
+        { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TG0P", "TH0P",
+          "TO0P", "Tp0P", NULL },
 };
 /* List of keys used to read/write fan speeds */
@@ -1296,6 +1299,8 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
        { .accelerometer = 1, .light = 1, .temperature_set = 12 },
 /* iMac 8: light sensor only, temperature set 13 */
        { .accelerometer = 0, .light = 0, .temperature_set = 13 },
+/* iMac 6: light sensor only, temperature set 14 */
+        { .accelerometer = 0, .light = 0, .temperature_set = 14 },
 };
 /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
@@ -1349,10 +1354,18 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
          DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
          DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
                &applesmc_dmi_data[4]},
+        { applesmc_dmi_match, "Apple MacPro", {
+          DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+          DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
+                &applesmc_dmi_data[4]},
        { applesmc_dmi_match, "Apple iMac 8", {
          DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
          DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") },
                &applesmc_dmi_data[13]},
+        { applesmc_dmi_match, "Apple iMac 6", {
+          DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+          DMI_MATCH(DMI_PRODUCT_NAME, "iMac6") },
+                &applesmc_dmi_data[14]},
        { applesmc_dmi_match, "Apple iMac 5", {
          DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
          DMI_MATCH(DMI_PRODUCT_NAME, "iMac5") },
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 59ba2086d2f9..a257cd5cd134 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -189,8 +189,6 @@ static void i2c_parport_attach (struct parport *port)
        if (adapter_parm[type].init.val)
                line_set(port, 1, &adapter_parm[type].init);
-        parport_release(adapter->pdev);
        if (i2c_bit_add_bus(&adapter->adapter) < 0) {
                printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
                goto ERROR1;
@@ -202,6 +200,7 @@ static void i2c_parport_attach (struct parport *port)
        return;
 ERROR1:
+        parport_release(adapter->pdev);
        parport_unregister_device(adapter->pdev);
 ERROR0:
        kfree(adapter);
@@ -221,6 +220,7 @@ static void i2c_parport_detach (struct parport *port)
                        if (adapter_parm[type].init.val)
                                line_set(port, 0, &adapter_parm[type].init);
                                
+                        parport_release(adapter->pdev);
                        parport_unregister_device(adapter->pdev);
                        if (prev)
                                prev->next = adapter->next;
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 28902ebd5539..e0d56ef2bcb0 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb.h>
@@ -33,7 +34,10 @@
 #include <linux/workqueue.h>
 #include <asm/irq.h>
+#include <asm/mach-types.h>
 #include <mach/usb.h>
+#include <mach/mux.h>
 #ifndef DEBUG
@@ -88,14 +92,9 @@ struct isp1301 {
 /*-------------------------------------------------------------------------*/
-#ifdef  CONFIG_MACH_OMAP_H2
 /* board-specific PM hooks */
-#include <asm/gpio.h>
+#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3)
-#include <mach/mux.h>
-#include <asm/mach-types.h>
 #if     defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE)
@@ -135,6 +134,33 @@ static inline void notresponding(struct isp1301 *isp)
 #endif
+#if defined(CONFIG_MACH_OMAP_H4)
+static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
+{
+        /* H4 controls this by DIP switch S2.4; no soft control.
+         * ON means the charger is always enabled.  Leave it OFF
+         * unless the OTG port is used only in B-peripheral mode.
+         */
+}
+static void enable_vbus_source(struct isp1301 *isp)
+{
+        /* this board won't supply more than 8mA vbus power.
+         * some boards can switch a 100ma "unit load" (or more).
+         */
+}
+/* products will deliver OTG messages with LEDs, GUI, etc */
+static inline void notresponding(struct isp1301 *isp)
+{
+        printk(KERN_NOTICE "OTG device not responding.\n");
+}
+#endif
 /*-------------------------------------------------------------------------*/
 static struct i2c_driver isp1301_driver;
@@ -334,8 +360,7 @@ static int gadget_suspend(struct isp1301 *isp)
 * NOTE: guaranteeing certain response times might mean we shouldn't
 * share keventd's work queue; a realtime task might be safest.
 */
-void
+static void isp1301_defer_work(struct isp1301 *isp, int work)
-isp1301_defer_work(struct isp1301 *isp, int work)
 {
        int status;
@@ -512,7 +537,6 @@ static void update_otg1(struct isp1301 *isp, u8 int_src)
        otg_ctrl &= ~OTG_XCEIV_INPUTS;
        otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
        if (int_src & INTR_SESS_VLD)
                otg_ctrl |= OTG_ASESSVLD;
        else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) {
@@ -886,11 +910,11 @@ static int otg_probe(struct platform_device *dev)
 static int otg_remove(struct platform_device *dev)
 {
-        otg_dev = 0;
+        otg_dev = NULL;
        return 0;
 }
-struct platform_driver omap_otg_driver = {
+static struct platform_driver omap_otg_driver = {
        .probe          = otg_probe,
        .remove         = otg_remove,
        .driver         = {
@@ -1212,6 +1236,8 @@ static void isp1301_release(struct device *dev)
        isp = dev_get_drvdata(dev);
+        /* FIXME -- not with a "new style" driver, it doesn't!! */
        /* ugly -- i2c hijacks our memory hook to wait_for_completion() */
        if (isp->i2c_release)
                isp->i2c_release(dev);
@@ -1233,7 +1259,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c)
        otg_unbind(isp);
 #endif
        if (machine_is_omap_h2())
-                omap_free_gpio(2);
+                gpio_free(2);
        isp->timer.data = 0;
        set_bit(WORK_STOP, &isp->todo);
@@ -1241,7 +1267,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c)
        flush_scheduled_work();
        put_device(&i2c->dev);
-        the_transceiver = 0;
+        the_transceiver = NULL;
        return 0;
 }
@@ -1295,7 +1321,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host)
        if (!host) {
                omap_writew(0, OTG_IRQ_EN);
                power_down(isp);
-                isp->otg.host = 0;
+                isp->otg.host = NULL;
                return 0;
        }
@@ -1344,7 +1370,9 @@ static int
 isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
 {
        struct isp1301  *isp = container_of(otg, struct isp1301, otg);
+#ifndef CONFIG_USB_OTG
        u32 l;
+#endif
        if (!otg || isp != the_transceiver)
                return -ENODEV;
@@ -1354,7 +1382,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
                if (!isp->otg.default_a)
                        enable_vbus_draw(isp, 0);
                usb_gadget_vbus_disconnect(isp->otg.gadget);
-                isp->otg.gadget = 0;
+                isp->otg.gadget = NULL;
                power_down(isp);
                return 0;
        }
@@ -1379,7 +1407,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
        power_up(isp);
        isp->otg.state = OTG_STATE_B_IDLE;
-        if (machine_is_omap_h2())
+        if (machine_is_omap_h2() || machine_is_omap_h3())
                isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
        isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
@@ -1499,7 +1527,8 @@ isp1301_start_hnp(struct otg_transceiver *dev)
 /*-------------------------------------------------------------------------*/
-static int __init isp1301_probe(struct i2c_client *i2c)
+static int __init
+isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 {
        int                     status;
        struct isp1301          *isp;
@@ -1647,7 +1676,7 @@ module_init(isp_init);
 static void __exit isp_exit(void)
 {
        if (the_transceiver)
-                otg_set_transceiver(0);
+                otg_set_transceiver(NULL);
        i2c_del_driver(&isp1301_driver);
 }
 module_exit(isp_exit);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 5a485c22660a..c6a63f46bc15 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -631,7 +631,7 @@ int i2c_del_adapter(struct i2c_adapter *adap)
        /* detach any active clients. This must be done first, because
         * it can fail; in which case we give up. */
-        list_for_each_entry_safe(client, _n, &adap->clients, list) {
+        list_for_each_entry_safe_reverse(client, _n, &adap->clients, list) {
                struct i2c_driver       *driver;
                driver = client->driver;
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 2d848010499d..81f70caeb40f 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -419,7 +419,7 @@ static void icside_setup_ports(hw_regs_t *hw, void __iomem *base,
        hw->chipset = ide_acorn;
 }
-static int __init
+static int __devinit
 icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 {
        void __iomem *base;
@@ -473,7 +473,7 @@ static const struct ide_port_info icside_v6_port_info __initdata = {
        .swdma_mask             = ATA_SWDMA2,
 };
-static int __init
+static int __devinit
 icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 {
        void __iomem *ioc_base, *easi_base;
diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c
index 6790e975a98c..bc4e40f3ede7 100644
--- a/drivers/input/ff-memless.c
+++ b/drivers/input/ff-memless.c
@@ -397,8 +397,9 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value)
 {
        struct ml_device *ml = dev->ff->private;
        struct ml_effect_state *state = &ml->states[effect_id];
+        unsigned long flags;
-        spin_lock_bh(&ml->timer_lock);
+        spin_lock_irqsave(&ml->timer_lock, flags);
        if (value > 0) {
                debug("initiated play");
@@ -424,7 +425,7 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value)
                ml_play_effects(ml);
        }
-        spin_unlock_bh(&ml->timer_lock);
+        spin_unlock_irqrestore(&ml->timer_lock, flags);
        return 0;
 }
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 22016ca15351..379b7ff354ec 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -824,7 +824,7 @@ static void atkbd_disconnect(struct serio *serio)
        atkbd_disable(atkbd);
        /* make sure we don't have a command in flight */
-        flush_scheduled_work();
+        cancel_delayed_work_sync(&atkbd->event_work);
        sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
        input_unregister_device(atkbd->dev);
@@ -868,6 +868,22 @@ static void atkbd_hp_keymap_fixup(struct atkbd *atkbd)
 }
 /*
+ * Inventec system with broken key release on volume keys
+ */
+static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd)
+{
+        const unsigned int forced_release_keys[] = {
+                0xae, 0xb0,
+        };
+        int i;
+        if (atkbd->set == 2)
+                for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
+                        __set_bit(forced_release_keys[i],
+                                  atkbd->force_release_mask);
+}
+/*
 * atkbd_set_keycode_table() initializes keyboard's keycode table
 * according to the selected scancode set
 */
@@ -1468,6 +1484,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
                .callback = atkbd_setup_fixup,
                .driver_data = atkbd_hp_keymap_fixup,
        },
+        {
+                .ident = "Inventec Symphony",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
+                },
+                .callback = atkbd_setup_fixup,
+                .driver_data = atkbd_inventec_keymap_fixup,
+        },
        { }
 };
diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
index bce160f4349b..86457feccfc4 100644
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -42,7 +42,7 @@
 static char *phone = "kip1000";
 module_param(phone, charp, S_IRUSR);
-MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}");
+MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
 enum {
        /* HID Registers */
@@ -258,6 +258,37 @@ static unsigned short keymap_usbph01(int scancode)
        }
 }
+/*
+ * Keymap for ATCom AU-100
+ * http://www.atcom.cn/En_products_AU100.html
+ * http://www.packetizer.com/products/au100/
+ * http://www.voip-info.org/wiki/view/AU-100
+ *
+ * Contributed by daniel@gimpelevich.san-francisco.ca.us
+ */
+static unsigned short keymap_atcom(int scancode)
+{
+        switch (scancode) {                             /* phone key:   */
+        case 0x82: return KEY_NUMERIC_0;                /*   0          */
+        case 0x11: return KEY_NUMERIC_1;                /*   1          */
+        case 0x12: return KEY_NUMERIC_2;                /*   2          */
+        case 0x14: return KEY_NUMERIC_3;                /*   3          */
+        case 0x21: return KEY_NUMERIC_4;                /*   4          */
+        case 0x22: return KEY_NUMERIC_5;                /*   5          */
+        case 0x24: return KEY_NUMERIC_6;                /*   6          */
+        case 0x41: return KEY_NUMERIC_7;                /*   7          */
+        case 0x42: return KEY_NUMERIC_8;                /*   8          */
+        case 0x44: return KEY_NUMERIC_9;                /*   9          */
+        case 0x84: return KEY_NUMERIC_POUND;            /*   #          */
+        case 0x81: return KEY_NUMERIC_STAR;             /*   *          */
+        case 0x18: return KEY_ENTER;                    /*   pickup     */
+        case 0x28: return KEY_ESC;                      /*   hangup     */
+        case 0x48: return KEY_LEFT;                     /* left arrow   */
+        case 0x88: return KEY_RIGHT;                    /* right arrow  */
+        default:   return special_keymap(scancode);
+        }
+}
 static unsigned short (*keymap)(int) = keymap_kip1000;
 /*
@@ -840,6 +871,10 @@ static int __init cm109_select_keymap(void)
                keymap = keymap_usbph01;
                printk(KERN_INFO KBUILD_MODNAME ": "
                        "Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
+        } else if (!strcasecmp(phone, "atcom")) {
+                keymap = keymap_atcom;
+                printk(KERN_INFO KBUILD_MODNAME ": "
+                        "Keymap for ATCom AU-100 phone loaded\n");
        } else {
                printk(KERN_ERR KBUILD_MODNAME ": "
                        "Unsupported phone: %s\n", phone);
diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
index e82d34201e97..88f04bf2ad6c 100644
--- a/drivers/input/mouse/hgpk.c
+++ b/drivers/input/mouse/hgpk.c
@@ -125,7 +125,7 @@ static void hgpk_spewing_hack(struct psmouse *psmouse,
 */
 static int hgpk_validate_byte(unsigned char *packet)
 {
-        return (packet[0] & 0x0C) == 0x08;
+        return (packet[0] & 0x0C) != 0x08;
 }
 static void hgpk_process_packet(struct psmouse *psmouse)
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index eec375cd10e6..29e686388a2c 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -337,6 +337,20 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
                        DMI_MATCH(DMI_PRODUCT_NAME, "2656"),
                },
        },
+        {
+                .ident = "Dell XPS M1530",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"),
+                },
+        },
+        {
+                .ident = "Compal HEL80I",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
+                },
+        },
        { }
 };
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index ca62ec639f8f..677680e9f54f 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -66,6 +66,7 @@
 *                 - Support Intuos3 4x6
 *      v1.47 (pc) - Added support for Bamboo
 *      v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
+ *      v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
 */
 /*
@@ -86,7 +87,7 @@
 /*
 * Version Information
 */
-#define DRIVER_VERSION "v1.48"
+#define DRIVER_VERSION "v1.49"
 #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
 #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
 #define DRIVER_LICENSE "GPL"
@@ -103,15 +104,15 @@ struct wacom {
        struct usb_device *usbdev;
        struct usb_interface *intf;
        struct urb *irq;
-        struct wacom_wac * wacom_wac;
+        struct wacom_wac *wacom_wac;
        struct mutex lock;
        unsigned int open:1;
        char phys[32];
 };
 struct wacom_combo {
-        struct wacom * wacom;
+        struct wacom *wacom;
-        struct urb * urb;
+        struct urb *urb;
 };
 extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
@@ -132,7 +133,7 @@ extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wa
 extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
 extern __u16 wacom_le16_to_cpu(unsigned char *data);
 extern __u16 wacom_be16_to_cpu(unsigned char *data);
-extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
+extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id);
-extern const struct usb_device_id * get_device_table(void);
+extern const struct usb_device_id *get_device_table(void);
 #endif
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 09e227aa0d49..484496daa0f3 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -14,8 +14,41 @@
 #include "wacom.h"
 #include "wacom_wac.h"
+/* defines to get HID report descriptor */
+#define HID_DEVICET_HID         (USB_TYPE_CLASS | 0x01)
+#define HID_DEVICET_REPORT      (USB_TYPE_CLASS | 0x02)
+#define HID_USAGE_UNDEFINED             0x00
+#define HID_USAGE_PAGE                  0x05
+#define HID_USAGE_PAGE_DIGITIZER        0x0d
+#define HID_USAGE_PAGE_DESKTOP          0x01
+#define HID_USAGE                       0x09
+#define HID_USAGE_X                     0x30
+#define HID_USAGE_Y                     0x31
+#define HID_USAGE_X_TILT                0x3d
+#define HID_USAGE_Y_TILT                0x3e
+#define HID_USAGE_FINGER                0x22
+#define HID_USAGE_STYLUS                0x20
+#define HID_COLLECTION                  0xc0
+enum {
+        WCM_UNDEFINED = 0,
+        WCM_DESKTOP,
+        WCM_DIGITIZER,
+};
+struct hid_descriptor {
+        struct usb_descriptor_header header;
+        __le16   bcdHID;
+        u8       bCountryCode;
+        u8       bNumDescriptors;
+        u8       bDescriptorType;
+        __le16   wDescriptorLength;
+} __attribute__ ((packed));
+/* defines to get/set USB message */
 #define USB_REQ_GET_REPORT      0x01
 #define USB_REQ_SET_REPORT      0x09
+#define WAC_HID_FEATURE_REPORT  0x03
 static int usb_get_report(struct usb_interface *intf, unsigned char type,
                                unsigned char id, void *buf, int size)
@@ -80,25 +113,21 @@ static void wacom_sys_irq(struct urb *urb)
 void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
 {
        input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data);
-        return;
 }
 void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data)
 {
        input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data);
-        return;
 }
 void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data)
 {
        input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data);
-        return;
 }
 void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value)
 {
        input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value);
-        return;
 }
 __u16 wacom_be16_to_cpu(unsigned char *data)
@@ -118,7 +147,6 @@ __u16 wacom_le16_to_cpu(unsigned char *data)
 void wacom_input_sync(void *wcombo)
 {
        input_sync(get_input_dev((struct wacom_combo *)wcombo));
-        return;
 }
 static int wacom_open(struct input_dev *dev)
@@ -160,7 +188,7 @@ static void wacom_close(struct input_dev *dev)
 void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
-        input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_1) |
+        input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_1) |
                BIT_MASK(BTN_5);
        input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
 }
@@ -170,7 +198,7 @@ void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
        input_dev->evbit[0] |= BIT_MASK(EV_MSC);
        input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
        input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
-        input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+        input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
                BIT_MASK(BTN_4);
 }
@@ -178,7 +206,7 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
        input_dev->evbit[0] |= BIT_MASK(EV_REL);
        input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
-        input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+        input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
                BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
        input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
                BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2);
@@ -188,7 +216,7 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
        input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
-        input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+        input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
                BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3);
        input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
        input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
@@ -196,14 +224,14 @@ void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
-        input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_4) |
+        input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) |
                BIT_MASK(BTN_5) | BIT_MASK(BTN_6) | BIT_MASK(BTN_7);
        input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
 }
 void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
-        input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
+        input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
 }
 void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
@@ -211,7 +239,7 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
        input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL);
        input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
        input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
-        input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+        input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
                BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) |
                BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
        input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
@@ -228,8 +256,7 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
-        input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2) |
+        input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2);
-                BIT_MASK(BTN_TOOL_RUBBER);
 }
 void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
@@ -237,15 +264,129 @@ void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
        input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER);
 }
+static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
+                           struct wacom_wac *wacom_wac)
+{
+        struct usb_device *dev = interface_to_usbdev(intf);
+        struct wacom_features *features = wacom_wac->features;
+        char limit = 0, result = 0;
+        int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
+        unsigned char *report;
+        report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
+        if (!report)
+                return -ENOMEM;
+        /* retrive report descriptors */
+        do {
+                result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+                        USB_REQ_GET_DESCRIPTOR,
+                        USB_RECIP_INTERFACE | USB_DIR_IN,
+                        HID_DEVICET_REPORT << 8,
+                        intf->altsetting[0].desc.bInterfaceNumber, /* interface */
+                        report,
+                        hid_desc->wDescriptorLength,
+                        5000); /* 5 secs */
+        } while (result < 0 && limit++ < 5);
+        if (result < 0)
+                goto out;
+        for (i = 0; i < hid_desc->wDescriptorLength; i++) {
+                switch (report[i]) {
+                case HID_USAGE_PAGE:
+                        switch (report[i + 1]) {
+                        case HID_USAGE_PAGE_DIGITIZER:
+                                usage = WCM_DIGITIZER;
+                                i++;
+                                break;
+                        case HID_USAGE_PAGE_DESKTOP:
+                                usage = WCM_DESKTOP;
+                                i++;
+                                break;
+                        }
+                        break;
+                case HID_USAGE:
+                        switch (report[i + 1]) {
+                        case HID_USAGE_X:
+                                if (usage == WCM_DESKTOP) {
+                                        if (finger) {
+                                                features->touch_x_max =
+                                                        features->touch_y_max =
+                                                        wacom_le16_to_cpu(&report[i + 3]);
+                                                features->x_max =
+                                                        wacom_le16_to_cpu(&report[i + 6]);
+                                                i += 7;
+                                        } else if (pen) {
+                                                features->x_max =
+                                                        wacom_le16_to_cpu(&report[i + 3]);
+                                                i += 4;
+                                        }
+                                } else if (usage == WCM_DIGITIZER) {
+                                        /* max pressure isn't reported
+                                        features->pressure_max = (unsigned short)
+                                                        (report[i+4] << 8  | report[i + 3]);
+                                        */
+                                        features->pressure_max = 255;
+                                        i += 4;
+                                }
+                                break;
+                        case HID_USAGE_Y:
+                                if (usage == WCM_DESKTOP)
+                                        features->y_max =
+                                                wacom_le16_to_cpu(&report[i + 3]);
+                                i += 4;
+                                break;
+                        case HID_USAGE_FINGER:
+                                finger = 1;
+                                i++;
+                                break;
+                        case HID_USAGE_STYLUS:
+                                pen = 1;
+                                i++;
+                                break;
+                        case HID_USAGE_UNDEFINED:
+                                if (usage == WCM_DESKTOP && finger) /* capacity */
+                                        features->pressure_max =
+                                                wacom_le16_to_cpu(&report[i + 3]);
+                                i += 4;
+                                break;
+                        }
+                        break;
+                case HID_COLLECTION:
+                        /* reset UsagePage ans Finger */
+                        finger = usage = 0;
+                        break;
+                }
+        }
+        result = 0;
+ out:
+        kfree(report);
+        return result;
+}
 static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
        struct usb_device *dev = interface_to_usbdev(intf);
+        struct usb_host_interface *interface = intf->cur_altsetting;
        struct usb_endpoint_descriptor *endpoint;
        struct wacom *wacom;
        struct wacom_wac *wacom_wac;
+        struct wacom_features *features;
        struct input_dev *input_dev;
        int error = -ENOMEM;
        char rep_data[2], limit = 0;
+        struct hid_descriptor *hid_desc;
        wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
        wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
@@ -268,8 +409,8 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
        usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
        strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
-        wacom_wac->features = get_wacom_feature(id);
+        wacom_wac->features = features = get_wacom_feature(id);
-        BUG_ON(wacom_wac->features->pktlen > 10);
+        BUG_ON(features->pktlen > 10);
        input_dev->name = wacom_wac->features->name;
        wacom->wacom_wac = wacom_wac;
@@ -282,18 +423,37 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
        input_dev->open = wacom_open;
        input_dev->close = wacom_close;
+        endpoint = &intf->cur_altsetting->endpoint[0].desc;
+        /* TabletPC need to retrieve the physical and logical maximum from report descriptor */
+        if (wacom_wac->features->type == TABLETPC) {
+                if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
+                        if (usb_get_extra_descriptor(&interface->endpoint[0],
+                                                     HID_DEVICET_REPORT, &hid_desc)) {
+                                printk("wacom: can not retrive extra class descriptor\n");
+                                goto fail2;
+                        }
+                }
+                error = wacom_parse_hid(intf, hid_desc, wacom_wac);
+                if (error)
+                        goto fail2;
+        }
        input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
        input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) |
                BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS);
-        input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0);
+        input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0);
-        input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0);
+        input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0);
-        input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0);
+        input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0);
+        if (features->type == TABLETPC) {
+                input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP);
+                input_set_abs_params(input_dev, ABS_RX, 0, features->touch_x_max, 4, 0);
+                input_set_abs_params(input_dev, ABS_RY, 0, features->touch_y_max, 4, 0);
+        }
        input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC);
        wacom_init_input_dev(input_dev, wacom_wac);
-        endpoint = &intf->cur_altsetting->endpoint[0].desc;
        usb_fill_int_urb(wacom->irq, dev,
                         usb_rcvintpipe(dev, endpoint->bEndpointAddress),
                         wacom_wac->data, wacom_wac->features->pktlen,
@@ -305,13 +465,22 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
        if (error)
                goto fail3;
-        /* Ask the tablet to report tablet data. Repeat until it succeeds */
+        /*
-        do {
+         * Ask the tablet to report tablet data if it is not a Tablet PC.
-                rep_data[0] = 2;
+         * Repeat until it succeeds
-                rep_data[1] = 2;
+         */
-                usb_set_report(intf, 3, 2, rep_data, 2);
+        if (wacom_wac->features->type != TABLETPC) {
-                usb_get_report(intf, 3, 2, rep_data, 2);
+                do {
-        } while (rep_data[1] != 2 && limit++ < 5);
+                        rep_data[0] = 2;
+                        rep_data[1] = 2;
+                        error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
+                                                2, rep_data, 2);
+                        if (error >= 0)
+                                error = usb_get_report(intf,
+                                                WAC_HID_FEATURE_REPORT, 2,
+                                                rep_data, 2);
+                } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
+        }
        usb_set_intfdata(intf, wacom);
        return 0;
@@ -333,7 +502,8 @@ static void wacom_disconnect(struct usb_interface *intf)
        usb_kill_urb(wacom->irq);
        input_unregister_device(wacom->dev);
        usb_free_urb(wacom->irq);
-        usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
+        usb_buffer_free(interface_to_usbdev(intf), 10,
+                        wacom->wacom_wac->data, wacom->data_dma);
        kfree(wacom->wacom_wac);
        kfree(wacom);
 }
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index bf3d9a8b2c1b..8dc8d1e59bea 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -535,31 +535,147 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
        return 1;
 }
+int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
+{
+        char *data = wacom->data;
+        int prox = 0, pressure;
+        static int stylusInProx, touchInProx = 1, touchOut;
+        struct urb *urb = ((struct wacom_combo *)wcombo)->urb;
+        dbg("wacom_tpc_irq: received report #%d", data[0]);
+        if (urb->actual_length == 5 || data[0] == 6) { /* Touch data */
+                if (urb->actual_length == 5) {  /* with touch */
+                        prox = data[0] & 0x03;
+                } else {  /* with capacity */
+                        prox = data[1] & 0x03;
+                }
+                if (!stylusInProx) { /* stylus not in prox */
+                        if (prox) {
+                                if (touchInProx) {
+                                        wacom->tool[1] = BTN_TOOL_DOUBLETAP;
+                                        wacom->id[0] = TOUCH_DEVICE_ID;
+                                        if (urb->actual_length != 5) {
+                                                wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+                                                wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+                                                wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
+                                                wacom_report_key(wcombo, BTN_TOUCH, wacom_le16_to_cpu(&data[6]));
+                                        } else {
+                                                wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
+                                                wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
+                                                wacom_report_key(wcombo, BTN_TOUCH, 1);
+                                        }
+                                        wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+                                        wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+                                        touchOut = 1;
+                                        return 1;
+                                }
+                        } else {
+                                wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+                                wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+                                wacom_report_key(wcombo, BTN_TOUCH, 0);
+                                touchOut = 0;
+                                touchInProx = 1;
+                                return 1;
+                        }
+                } else if (touchOut || !prox) { /* force touch out-prox */
+                        wacom_report_abs(wcombo, ABS_MISC, TOUCH_DEVICE_ID);
+                        wacom_report_key(wcombo, BTN_TOUCH, 0);
+                        touchOut = 0;
+                        touchInProx = 1;
+                        return 1;
+                }
+        } else if (data[0] == 2) { /* Penabled */
+                prox = data[1] & 0x20;
+                touchInProx = 0;
+                wacom->id[0] = ERASER_DEVICE_ID;
+                /*
+                 * if going from out of proximity into proximity select between the eraser
+                 * and the pen based on the state of the stylus2 button, choose eraser if
+                 * pressed else choose pen. if not a proximity change from out to in, send
+                 * an out of proximity for previous tool then a in for new tool.
+                 */
+                if (prox) { /* in prox */
+                        if (!wacom->tool[0]) {
+                                /* Going into proximity select tool */
+                                wacom->tool[1] = (data[1] & 0x08) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+                                if (wacom->tool[1] == BTN_TOOL_PEN)
+                                        wacom->id[0] = STYLUS_DEVICE_ID;
+                        } else if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[1] & 0x08)) {
+                                /*
+                                 * was entered with stylus2 pressed
+                                 * report out proximity for previous tool
+                                */
+                                wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+                                wacom_report_key(wcombo, wacom->tool[1], 0);
+                                wacom_input_sync(wcombo);
+                                /* set new tool */
+                                wacom->tool[1] = BTN_TOOL_PEN;
+                                wacom->id[0] = STYLUS_DEVICE_ID;
+                                return 0;
+                        }
+                        if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+                                /* Unknown tool selected default to pen tool */
+                                wacom->tool[1] = BTN_TOOL_PEN;
+                                wacom->id[0] = STYLUS_DEVICE_ID;
+                        }
+                        wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+                        wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+                        wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+                        wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+                        pressure = ((data[7] & 0x01) << 8) | data[6];
+                        if (pressure < 0)
+                                pressure = wacom->features->pressure_max + pressure + 1;
+                        wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+                        wacom_report_key(wcombo, BTN_TOUCH, pressure);
+                } else {
+                        wacom_report_abs(wcombo, ABS_PRESSURE, 0);
+                        wacom_report_key(wcombo, BTN_STYLUS, 0);
+                        wacom_report_key(wcombo, BTN_STYLUS2, 0);
+                        wacom_report_key(wcombo, BTN_TOUCH, 0);
+                }
+                wacom_report_key(wcombo, wacom->tool[1], prox);
+                wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+                stylusInProx = prox;
+                wacom->tool[0] = prox;
+                return 1;
+        }
+        return 0;
+}
 int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
 {
        switch (wacom_wac->features->type) {
                case PENPARTNER:
-                        return (wacom_penpartner_irq(wacom_wac, wcombo));
+                        return wacom_penpartner_irq(wacom_wac, wcombo);
-                        break;
                case PL:
-                        return (wacom_pl_irq(wacom_wac, wcombo));
+                        return wacom_pl_irq(wacom_wac, wcombo);
-                        break;
                case WACOM_G4:
                case GRAPHIRE:
                case WACOM_MO:
-                        return (wacom_graphire_irq(wacom_wac, wcombo));
+                        return wacom_graphire_irq(wacom_wac, wcombo);
-                        break;
                case PTU:
-                        return (wacom_ptu_irq(wacom_wac, wcombo));
+                        return wacom_ptu_irq(wacom_wac, wcombo);
-                        break;
                case INTUOS:
                case INTUOS3S:
                case INTUOS3:
                case INTUOS3L:
                case CINTIQ:
                case WACOM_BEE:
-                        return (wacom_intuos_irq(wacom_wac, wcombo));
+                        return wacom_intuos_irq(wacom_wac, wcombo);
-                        break;
+                case TABLETPC:
+                        return wacom_tpc_irq(wacom_wac, wcombo);
                default:
                        return 0;
        }
@@ -586,13 +702,15 @@ void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_w
                        /* fall through */
                case INTUOS3S:
                        input_dev_i3s(input_dev, wacom_wac);
+                        /* fall through */
                case INTUOS:
                        input_dev_i(input_dev, wacom_wac);
                        break;
                case PL:
                case PTU:
+                case TABLETPC:
                        input_dev_pl(input_dev, wacom_wac);
-                        break;
+                        /* fall through */
                case PENPARTNER:
                        input_dev_pt(input_dev, wacom_wac);
                        break;
@@ -611,6 +729,7 @@ static struct wacom_features wacom_features[] = {
        { "Wacom Graphire4 6x8", 8,  16704, 12064,  511, 63, WACOM_G4 },
        { "Wacom BambooFun 4x5", 9,  14760,  9225,  511, 63, WACOM_MO },
        { "Wacom BambooFun 6x8", 9,  21648, 13530,  511, 63, WACOM_MO },
+        { "Wacom Bamboo1 Medium",8,  16704, 12064,  511, 63, GRAPHIRE },
        { "Wacom Volito",        8,   5104,  3712,  511, 63, GRAPHIRE },
        { "Wacom PenStation2",   8,   3250,  2320,  255, 63, GRAPHIRE },
        { "Wacom Volito2 4x5",   8,   5104,  3712,  511, 63, GRAPHIRE },
@@ -650,6 +769,10 @@ static struct wacom_features wacom_features[] = {
        { "Wacom Cintiq 21UX",   10, 87200, 65600, 1023, 63, CINTIQ },
        { "Wacom Cintiq 20WSX",  10, 86680, 54180, 1023, 63, WACOM_BEE },
        { "Wacom Cintiq 12WX",   10, 53020, 33440, 1023, 63, WACOM_BEE },
+        { "Wacom DTU1931",        8, 37832, 30305,  511,  0, PL },
+        { "Wacom ISDv4 90",       8, 26202, 16325,  255,  0, TABLETPC },
+        { "Wacom ISDv4 93",       8, 26202, 16325,  255,  0, TABLETPC },
+        { "Wacom ISDv4 9A",       8, 26202, 16325,  255,  0, TABLETPC },
        { "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 31, INTUOS },
        { }
 };
@@ -665,6 +788,7 @@ static struct usb_device_id wacom_ids[] = {
        { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
        { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) },
        { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) },
+        { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) },
        { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
        { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
        { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
@@ -704,18 +828,26 @@ static struct usb_device_id wacom_ids[] = {
        { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
        { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) },
        { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) },
+        { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) },
+        { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) },
+        { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) },
+        { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) },
        { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
        { }
 };
-const struct usb_device_id * get_device_table(void) {
+const struct usb_device_id *get_device_table(void)
-        const struct usb_device_id * id_table = wacom_ids;
+{
+        const struct usb_device_id *id_table = wacom_ids;
        return id_table;
 }
-struct wacom_features * get_wacom_feature(const struct usb_device_id * id) {
+struct wacom_features * get_wacom_feature(const struct usb_device_id *id)
+{
        int index = id - wacom_ids;
        struct wacom_features *wf = &wacom_features[index];
        return wf;
 }
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 3342bc05847d..f9c8b69673b7 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -10,6 +10,7 @@
 #define WACOM_WAC_H
 #define STYLUS_DEVICE_ID        0x02
+#define TOUCH_DEVICE_ID         0x03
 #define CURSOR_DEVICE_ID        0x06
 #define ERASER_DEVICE_ID        0x0A
 #define PAD_DEVICE_ID           0x0F
@@ -27,6 +28,7 @@ enum {
        CINTIQ,
        WACOM_BEE,
        WACOM_MO,
+        TABLETPC,
        MAX_TYPE
 };
@@ -38,6 +40,8 @@ struct wacom_features {
        int pressure_max;
        int distance_max;
        int type;
+        int touch_x_max;
+        int touch_y_max;
 };
 struct wacom_wac {
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index d20689cdbd5d..8f38c5e55ce6 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c
@@ -262,7 +262,7 @@ static int elo_setup_10(struct elo *elo)
                input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
        printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, "
-                "features: %x02x, controller: 0x%02x\n",
+                "features: 0x%02x, controller: 0x%02x\n",
                elo_types[(packet[1] -'0') & 0x03],
                packet[5], packet[4], packet[3], packet[7]);
diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c
index 3ab6362f043c..928d2ed8865f 100644
--- a/drivers/input/xen-kbdfront.c
+++ b/drivers/input/xen-kbdfront.c
@@ -323,7 +323,7 @@ static struct xenbus_device_id xenkbd_ids[] = {
        { "" }
 };
-static struct xenbus_driver xenkbd = {
+static struct xenbus_driver xenkbd_driver = {
        .name = "vkbd",
        .owner = THIS_MODULE,
        .ids = xenkbd_ids,
@@ -342,12 +342,12 @@ static int __init xenkbd_init(void)
        if (xen_initial_domain())
                return -ENODEV;
-        return xenbus_register_frontend(&xenkbd);
+        return xenbus_register_frontend(&xenkbd_driver);
 }
 static void __exit xenkbd_cleanup(void)
 {
-        xenbus_unregister_driver(&xenkbd);
+        xenbus_unregister_driver(&xenkbd_driver);
 }
 module_init(xenkbd_init);
diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c
index 84d75a3f5d17..ded9d0baf607 100644
--- a/drivers/isdn/hisax/config.c
+++ b/drivers/isdn/hisax/config.c
@@ -1213,7 +1213,7 @@ static void HiSax_shiftcards(int idx)
                memcpy(&cards[i], &cards[i + 1], sizeof(cards[i]));
 }
-static int HiSax_inithardware(int *busy_flag)
+static int __init HiSax_inithardware(int *busy_flag)
 {
        int foundcards = 0;
        int i = 0;
@@ -1542,7 +1542,9 @@ static void __exit HiSax_exit(void)
        printk(KERN_INFO "HiSax module removed\n");
 }
-int hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
+#ifdef CONFIG_HOTPLUG
+int __devinit hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
 {
        u_char ids[16];
        int ret = -1;
@@ -1563,6 +1565,8 @@ error:
 }
 EXPORT_SYMBOL(hisax_init_pcmcia);
+#endif
 EXPORT_SYMBOL(HiSax_closecard);
 #include "hisax_if.h"
@@ -1580,6 +1584,11 @@ static void hisax_bc_close(struct BCState *bcs);
 static void hisax_bh(struct work_struct *work);
 static void EChannel_proc_rcv(struct hisax_d_if *d_if);
+static int hisax_setup_card_dynamic(struct IsdnCard *card)
+{
+        return 2;
+}
 int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[],
                   char *name, int protocol)
 {
@@ -1599,7 +1608,8 @@ int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[],
        cards[i].protocol = protocol;
        sprintf(id, "%s%d", name, i);
        nrcards++;
-        retval = checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card);
+        retval = checkcard(i, id, NULL, hisax_d_if->owner,
+                                hisax_setup_card_dynamic);
        if (retval == 0) { // yuck
                cards[i].typ = 0;
                nrcards--;
diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c
index 2c21d4f25cc8..a98ab72adf95 100644
--- a/drivers/macintosh/rack-meter.c
+++ b/drivers/macintosh/rack-meter.c
@@ -288,7 +288,7 @@ static void __devexit rackmeter_stop_cpu_sniffer(struct rackmeter *rm)
        cancel_rearming_delayed_work(&rm->cpu[1].sniffer);
 }
-static int rackmeter_setup(struct rackmeter *rm)
+static int __devinit rackmeter_setup(struct rackmeter *rm)
 {
        pr_debug("rackmeter: setting up i2s..\n");
        rackmeter_setup_i2s(rm);
@@ -582,12 +582,12 @@ static struct of_device_id rackmeter_match[] = {
        { }
 };
-static struct macio_driver rackmeter_drv = {
+static struct macio_driver rackmeter_driver = {
        .name = "rackmeter",
        .owner = THIS_MODULE,
        .match_table = rackmeter_match,
        .probe = rackmeter_probe,
-        .remove = rackmeter_remove,
+        .remove = __devexit_p(rackmeter_remove),
        .shutdown = rackmeter_shutdown,
 };
@@ -596,14 +596,14 @@ static int __init rackmeter_init(void)
 {
        pr_debug("rackmeter_init()\n");
-        return macio_register_driver(&rackmeter_drv);
+        return macio_register_driver(&rackmeter_driver);
 }
 static void __exit rackmeter_exit(void)
 {
        pr_debug("rackmeter_exit()\n");
-        macio_unregister_driver(&rackmeter_drv);
+        macio_unregister_driver(&rackmeter_driver);
 }
 module_init(rackmeter_init);
diff --git a/drivers/misc/sgi-gru/Makefile b/drivers/misc/sgi-gru/Makefile
index d03597a521b0..9e9170b3599a 100644
--- a/drivers/misc/sgi-gru/Makefile
+++ b/drivers/misc/sgi-gru/Makefile
@@ -1,3 +1,7 @@
+ifdef CONFIG_SGI_GRU_DEBUG
+  EXTRA_CFLAGS  += -DDEBUG
+endif
 obj-$(CONFIG_SGI_GRU) := gru.o
 gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o
diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c
index 7bcb81002dcf..571b211608d1 100644
--- a/drivers/misc/sony-laptop.c
+++ b/drivers/misc/sony-laptop.c
@@ -1038,8 +1038,8 @@ static int sony_nc_add(struct acpi_device *device)
                goto outinput;
        }
-        if (!acpi_video_backlight_support()) {
+        if (acpi_video_backlight_support()) {
-                printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be "
+                printk(KERN_INFO DRV_PFX "brightness ignored, must be "
                       "controlled by ACPI video driver\n");
        } else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
                                                &handle))) {
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 7a4a26b0edd2..899766e16fa8 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -5318,6 +5318,7 @@ static enum fan_control_commands fan_control_commands;
 static u8 fan_control_initial_status;
 static u8 fan_control_desired_level;
+static u8 fan_control_resume_level;
 static int fan_watchdog_maxinterval;
 static struct mutex fan_mutex;
@@ -5440,8 +5441,8 @@ static int fan_set_level(int level)
        case TPACPI_FAN_WR_ACPI_FANS:
        case TPACPI_FAN_WR_TPEC:
-                if ((level != TP_EC_FAN_AUTO) &&
+                if (!(level & TP_EC_FAN_AUTO) &&
-                    (level != TP_EC_FAN_FULLSPEED) &&
+                    !(level & TP_EC_FAN_FULLSPEED) &&
                    ((level < 0) || (level > 7)))
                        return -EINVAL;
@@ -6005,38 +6006,67 @@ static void fan_exit(void)
 static void fan_suspend(pm_message_t state)
 {
+        int rc;
        if (!fan_control_allowed)
                return;
        /* Store fan status in cache */
-        fan_get_status_safe(NULL);
+        fan_control_resume_level = 0;
+        rc = fan_get_status_safe(&fan_control_resume_level);
+        if (rc < 0)
+                printk(TPACPI_NOTICE
+                        "failed to read fan level for later "
+                        "restore during resume: %d\n", rc);
+        /* if it is undefined, don't attempt to restore it.
+         * KEEP THIS LAST */
        if (tp_features.fan_ctrl_status_undef)
-                fan_control_desired_level = TP_EC_FAN_AUTO;
+                fan_control_resume_level = 0;
 }
 static void fan_resume(void)
 {
-        u8 saved_fan_level;
        u8 current_level = 7;
        bool do_set = false;
+        int rc;
        /* DSDT *always* updates status on resume */
        tp_features.fan_ctrl_status_undef = 0;
-        saved_fan_level = fan_control_desired_level;
        if (!fan_control_allowed ||
+            !fan_control_resume_level ||
            (fan_get_status_safe(&current_level) < 0))
                return;
        switch (fan_control_access_mode) {
        case TPACPI_FAN_WR_ACPI_SFAN:
-                do_set = (saved_fan_level > current_level);
+                /* never decrease fan level */
+                do_set = (fan_control_resume_level > current_level);
                break;
        case TPACPI_FAN_WR_ACPI_FANS:
        case TPACPI_FAN_WR_TPEC:
-                do_set = ((saved_fan_level & TP_EC_FAN_FULLSPEED) ||
+                /* never decrease fan level, scale is:
-                          (saved_fan_level == 7 &&
+                 * TP_EC_FAN_FULLSPEED > 7 >= TP_EC_FAN_AUTO
-                           !(current_level & TP_EC_FAN_FULLSPEED)));
+                 *
+                 * We expect the firmware to set either 7 or AUTO, but we
+                 * handle FULLSPEED out of paranoia.
+                 *
+                 * So, we can safely only restore FULLSPEED or 7, anything
+                 * else could slow the fan.  Restoring AUTO is useless, at
+                 * best that's exactly what the DSDT already set (it is the
+                 * slower it uses).
+                 *
+                 * Always keep in mind that the DSDT *will* have set the
+                 * fans to what the vendor supposes is the best level.  We
+                 * muck with it only to speed the fan up.
+                 */
+                if (fan_control_resume_level != 7 &&
+                    !(fan_control_resume_level & TP_EC_FAN_FULLSPEED))
+                        return;
+                else
+                        do_set = !(current_level & TP_EC_FAN_FULLSPEED) &&
+                                 (current_level != fan_control_resume_level);
                break;
        default:
                return;
@@ -6044,8 +6074,11 @@ static void fan_resume(void)
        if (do_set) {
                printk(TPACPI_NOTICE
                        "restoring fan level to 0x%02x\n",
-                        saved_fan_level);
+                        fan_control_resume_level);
-                fan_set_level_safe(saved_fan_level);
+                rc = fan_set_level_safe(fan_control_resume_level);
+                if (rc < 0)
+                        printk(TPACPI_NOTICE
+                                "failed to restore fan level: %d\n", rc);
        }
 }
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index e04bcf1dff87..d8966bae0e0b 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -1022,7 +1022,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
        }
        /*
-         * OK, now the LEB is locked and we can safely start moving iy. Since
+         * OK, now the LEB is locked and we can safely start moving it. Since
         * this function utilizes thie @ubi->peb1_buf buffer which is shared
         * with some other functions, so lock the buffer by taking the
         * @ubi->buf_mutex.
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 4f2daa5bbecf..41d47e1cf15c 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -320,7 +320,7 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
        }
        err = ubi_io_read_data(ubi, buf, pnum, 0, len);
-        if (err && err != UBI_IO_BITFLIPS)
+        if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
                goto out_free_buf;
        data_crc = be32_to_cpu(vid_hdr->data_crc);
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 05d70937b543..dcb6dac1dc54 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -1396,7 +1396,8 @@ int ubi_thread(void *u)
                                ubi_msg("%s: %d consecutive failures",
                                        ubi->bgt_name, WL_MAX_FAILURES);
                                ubi_ro_mode(ubi);
-                                break;
+                                ubi->thread_enabled = 0;
+                                continue;
                        }
                } else
                        failures = 0;
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index f5bdc92c1a65..8571e8c0bc67 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -1690,9 +1690,11 @@ static int atl2_resume(struct pci_dev *pdev)
        ATL2_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
-        err = atl2_request_irq(adapter);
+        if (netif_running(netdev)) {
-        if (netif_running(netdev) && err)
+                err = atl2_request_irq(adapter);
-                return err;
+                if (err)
+                        return err;
+        }
        atl2_reset_hw(&adapter->hw);
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index 7373dafbb3f7..059369885be1 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -1112,7 +1112,7 @@ static void ipg_nic_rx_free_skb(struct net_device *dev)
                struct ipg_rx *rxfd = sp->rxd + entry;
                pci_unmap_single(sp->pdev,
-                        le64_to_cpu(rxfd->frag_info & ~IPG_RFI_FRAGLEN),
+                        le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN,
                        sp->rx_buf_sz, PCI_DMA_FROMDEVICE);
                dev_kfree_skb_irq(sp->rx_buff[entry]);
                sp->rx_buff[entry] = NULL;
@@ -1179,7 +1179,7 @@ static int ipg_nic_rx_check_error(struct net_device *dev)
                 */
                if (sp->rx_buff[entry]) {
                        pci_unmap_single(sp->pdev,
-                                le64_to_cpu(rxfd->frag_info & ~IPG_RFI_FRAGLEN),
+                                le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN,
                                sp->rx_buf_sz, PCI_DMA_FROMDEVICE);
                        dev_kfree_skb_irq(sp->rx_buff[entry]);
@@ -1246,7 +1246,7 @@ static void ipg_nic_rx_with_start(struct net_device *dev,
        if (jumbo->found_start)
                dev_kfree_skb_irq(jumbo->skb);
-        pci_unmap_single(pdev, le64_to_cpu(rxfd->frag_info & ~IPG_RFI_FRAGLEN),
+        pci_unmap_single(pdev, le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN,
                         sp->rx_buf_sz, PCI_DMA_FROMDEVICE);
        skb_put(skb, sp->rxfrag_size);
@@ -1349,7 +1349,7 @@ static int ipg_nic_rx_jumbo(struct net_device *dev)
                unsigned int entry = curr % IPG_RFDLIST_LENGTH;
                struct ipg_rx *rxfd = sp->rxd + entry;
-                if (!(rxfd->rfs & le64_to_cpu(IPG_RFS_RFDDONE)))
+                if (!(rxfd->rfs & cpu_to_le64(IPG_RFS_RFDDONE)))
                        break;
                switch (ipg_nic_rx_check_frame_type(dev)) {
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 7548fb7360d9..8ed823ae639e 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1287,7 +1287,34 @@ static void ixgbe_set_itr(struct ixgbe_adapter *adapter)
        return;
 }
-static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter);
+/**
+ * ixgbe_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
+{
+        IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
+        IXGBE_WRITE_FLUSH(&adapter->hw);
+        if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+                int i;
+                for (i = 0; i < adapter->num_msix_vectors; i++)
+                        synchronize_irq(adapter->msix_entries[i].vector);
+        } else {
+                synchronize_irq(adapter->pdev->irq);
+        }
+}
+/**
+ * ixgbe_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
+{
+        u32 mask;
+        mask = IXGBE_EIMS_ENABLE_MASK;
+        IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
+        IXGBE_WRITE_FLUSH(&adapter->hw);
+}
 /**
 * ixgbe_intr - legacy mode Interrupt Handler
@@ -1394,35 +1421,6 @@ static void ixgbe_free_irq(struct ixgbe_adapter *adapter)
 }
 /**
- * ixgbe_irq_disable - Mask off interrupt generation on the NIC
- * @adapter: board private structure
- **/
-static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
-{
-        IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
-        IXGBE_WRITE_FLUSH(&adapter->hw);
-        if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
-                int i;
-                for (i = 0; i < adapter->num_msix_vectors; i++)
-                        synchronize_irq(adapter->msix_entries[i].vector);
-        } else {
-                synchronize_irq(adapter->pdev->irq);
-        }
-}
-/**
- * ixgbe_irq_enable - Enable default interrupt generation settings
- * @adapter: board private structure
- **/
-static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
-{
-        u32 mask;
-        mask = IXGBE_EIMS_ENABLE_MASK;
-        IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
-        IXGBE_WRITE_FLUSH(&adapter->hw);
-}
-/**
 * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts
 *
 **/
@@ -2332,7 +2330,7 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
 * Once we know the feature-set enabled for the device, we'll cache
 * the register offset the descriptor ring is assigned to.
 **/
-static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
+static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
 {
        int feature_mask = 0, rss_i;
        int i, txr_idx, rxr_idx;
@@ -2369,7 +2367,7 @@ static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
 * number of queues at compile-time.  The polling_netdev array is
 * intended for Multiqueue, but should work fine with a single queue.
 **/
-static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
+static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
 {
        int i;
@@ -2410,8 +2408,7 @@ err_tx_ring_allocation:
 * Attempt to configure the interrupts using the best available
 * capabilities of the hardware and the kernel.
 **/
-static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter
+static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
-                                                    *adapter)
 {
        int err = 0;
        int vector, v_budget;
@@ -2503,7 +2500,7 @@ static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter)
 * - Hardware queue count (num_*_queues)
 *   - defined by miscellaneous hardware support/features (RSS, etc.)
 **/
-static int __devinit ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
+static int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
 {
        int err;
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index 81c6cdc3851f..665e70d620fc 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -912,23 +912,23 @@ jme_alloc_and_feed_skb(struct jme_adapter *jme, int idx)
                skb_put(skb, framesize);
                skb->protocol = eth_type_trans(skb, jme->dev);
-                if (jme_rxsum_ok(jme, rxdesc->descwb.flags))
+                if (jme_rxsum_ok(jme, le16_to_cpu(rxdesc->descwb.flags)))
                        skb->ip_summed = CHECKSUM_UNNECESSARY;
                else
                        skb->ip_summed = CHECKSUM_NONE;
-                if (rxdesc->descwb.flags & RXWBFLAG_TAGON) {
+                if (rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_TAGON)) {
                        if (jme->vlgrp) {
                                jme->jme_vlan_rx(skb, jme->vlgrp,
-                                        le32_to_cpu(rxdesc->descwb.vlan));
+                                        le16_to_cpu(rxdesc->descwb.vlan));
                                NET_STAT(jme).rx_bytes += 4;
                        }
                } else {
                        jme->jme_rx(skb);
                }
-                if ((le16_to_cpu(rxdesc->descwb.flags) & RXWBFLAG_DEST) ==
+                if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_DEST)) ==
-                                RXWBFLAG_DEST_MUL)
+                    cpu_to_le16(RXWBFLAG_DEST_MUL))
                        ++(NET_STAT(jme).multicast);
                jme->dev->last_rx = jiffies;
@@ -961,7 +961,7 @@ jme_process_receive(struct jme_adapter *jme, int limit)
                rxdesc = rxring->desc;
                rxdesc += i;
-                if ((rxdesc->descwb.flags & RXWBFLAG_OWN) ||
+                if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_OWN)) ||
                !(rxdesc->descwb.desccnt & RXWBDCNT_WBCPL))
                        goto out;
@@ -1763,10 +1763,9 @@ jme_expand_header(struct jme_adapter *jme, struct sk_buff *skb)
 }
 static int
-jme_tx_tso(struct sk_buff *skb,
+jme_tx_tso(struct sk_buff *skb, __le16 *mss, u8 *flags)
-                u16 *mss, u8 *flags)
 {
-        *mss = skb_shinfo(skb)->gso_size << TXDESC_MSS_SHIFT;
+        *mss = cpu_to_le16(skb_shinfo(skb)->gso_size << TXDESC_MSS_SHIFT);
        if (*mss) {
                *flags |= TXFLAG_LSEN;
@@ -1826,11 +1825,11 @@ jme_tx_csum(struct jme_adapter *jme, struct sk_buff *skb, u8 *flags)
 }
 static inline void
-jme_tx_vlan(struct sk_buff *skb, u16 *vlan, u8 *flags)
+jme_tx_vlan(struct sk_buff *skb, __le16 *vlan, u8 *flags)
 {
        if (vlan_tx_tag_present(skb)) {
                *flags |= TXFLAG_TAGON;
-                *vlan = vlan_tx_tag_get(skb);
+                *vlan = cpu_to_le16(vlan_tx_tag_get(skb));
        }
 }
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index b9dcdbd369f8..e513f76f2a9f 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -899,7 +899,8 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force)
                if (skb != NULL) {
                        if (skb_queue_len(&mp->rx_recycle) <
                                        mp->default_rx_ring_size &&
-                            skb_recycle_check(skb, mp->skb_size))
+                            skb_recycle_check(skb, mp->skb_size +
+                                        dma_get_cache_alignment() - 1))
                                __skb_queue_head(&mp->rx_recycle, skb);
                        else
                                dev_kfree_skb(skb);
@@ -2435,8 +2436,8 @@ static int mv643xx_eth_shared_remove(struct platform_device *pdev)
        struct mv643xx_eth_shared_platform_data *pd = pdev->dev.platform_data;
        if (pd == NULL || pd->shared_smi == NULL) {
-                mdiobus_free(msp->smi_bus);
                mdiobus_unregister(msp->smi_bus);
+                mdiobus_free(msp->smi_bus);
        }
        if (msp->err_interrupt != NO_IRQ)
                free_irq(msp->err_interrupt, msp);
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index cf3cca4642f2..f51944b28cfa 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -349,7 +349,7 @@ static int ibmtr_suspend(struct pcmcia_device *link)
        return 0;
 }
-static int ibmtr_resume(struct pcmcia_device *link)
+static int __devinit ibmtr_resume(struct pcmcia_device *link)
 {
        ibmtr_dev_t *info = link->priv;
        struct net_device *dev = info->dev;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 8fb1faca883a..55bc24b234e3 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -564,20 +564,32 @@ EXPORT_SYMBOL(genphy_restart_aneg);
 */
 int genphy_config_aneg(struct phy_device *phydev)
 {
-        int result = 0;
+        int result;
-        if (AUTONEG_ENABLE == phydev->autoneg) {
+        if (AUTONEG_ENABLE != phydev->autoneg)
-                int result = genphy_config_advert(phydev);
+                return genphy_setup_forced(phydev);
+        result = genphy_config_advert(phydev);
+        if (result < 0) /* error */
+                return result;
-                if (result < 0) /* error */
+        if (result == 0) {
-                        return result;
+                /* Advertisment hasn't changed, but maybe aneg was never on to
+                 * begin with?  Or maybe phy was isolated? */
+                int ctl = phy_read(phydev, MII_BMCR);
+                if (ctl < 0)
+                        return ctl;
+                if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
+                        result = 1; /* do restart aneg */
+        }
-                /* Only restart aneg if we are advertising something different
+        /* Only restart aneg if we are advertising something different
-                 * than we were before.  */
+         * than we were before.  */
-                if (result > 0)
+        if (result > 0)
-                        result = genphy_restart_aneg(phydev);
+                result = genphy_restart_aneg(phydev);
-        } else
-                result = genphy_setup_forced(phydev);
        return result;
 }
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index a24bb68887ab..59f242a67714 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -927,7 +927,7 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
        struct sh_eth_private *mdp = netdev_priv(ndev);
        struct sh_eth_txdesc *txdesc;
        u32 entry;
-        int flags;
+        unsigned long flags;
        spin_lock_irqsave(&mdp->lock, flags);
        if ((mdp->cur_tx - mdp->dirty_tx) >= (TX_RING_SIZE - 4)) {
@@ -1141,7 +1141,7 @@ static int sh_mdio_init(struct net_device *ndev, int id)
        /* Hook up MII support for ethtool */
        mdp->mii_bus->name = "sh_mii";
        mdp->mii_bus->parent = &ndev->dev;
-        mdp->mii_bus->id[0] = id;
+        snprintf(mdp->mii_bus->id, MII_BUS_ID_SIZE, "%x", id);
        /* PHY IRQ */
        mdp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 1f26ab0e7986..9a16a79b67d0 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -1735,7 +1735,7 @@ static const struct ethtool_ops smc911x_ethtool_ops = {
 * This routine has a simple purpose -- make the SMC chip generate an
 * interrupt, so an auto-detect routine can detect it, and find the IRQ,
 */
-static int __init smc911x_findirq(struct net_device *dev)
+static int __devinit smc911x_findirq(struct net_device *dev)
 {
        struct smc911x_local *lp = netdev_priv(dev);
        int timeout = 20;
@@ -1799,7 +1799,7 @@ static int __init smc911x_findirq(struct net_device *dev)
 * o  actually GRAB the irq.
 * o  GRAB the region
 */
-static int __init smc911x_probe(struct net_device *dev)
+static int __devinit smc911x_probe(struct net_device *dev)
 {
        struct smc911x_local *lp = netdev_priv(dev);
        int i, retval;
@@ -1813,7 +1813,7 @@ static int __init smc911x_probe(struct net_device *dev)
        val = SMC_GET_BYTE_TEST(lp);
        DBG(SMC_DEBUG_MISC, "%s: endian probe returned 0x%04x\n", CARDNAME, val);
        if (val != 0x87654321) {
-                printk(KERN_ERR "Invalid chip endian 0x08%x\n",val);
+                printk(KERN_ERR "Invalid chip endian 0x%08x\n",val);
                retval = -ENODEV;
                goto err_out;
        }
@@ -2048,7 +2048,7 @@ err_out:
 *       0 --> there is a device
 *       anything else, error
 */
-static int smc911x_drv_probe(struct platform_device *pdev)
+static int __devinit smc911x_drv_probe(struct platform_device *pdev)
 {
 #ifdef SMC_DYNAMIC_BUS_CONFIG
        struct smc911x_platdata *pd = pdev->dev.platform_data;
@@ -2124,7 +2124,7 @@ out:
        return ret;
 }
-static int smc911x_drv_remove(struct platform_device *pdev)
+static int __devexit smc911x_drv_remove(struct platform_device *pdev)
 {
        struct net_device *ndev = platform_get_drvdata(pdev);
        struct smc911x_local *lp = netdev_priv(ndev);
@@ -2195,7 +2195,7 @@ static int smc911x_drv_resume(struct platform_device *dev)
 static struct platform_driver smc911x_driver = {
        .probe           = smc911x_drv_probe,
-        .remove  = smc911x_drv_remove,
+        .remove  = __devexit_p(smc911x_drv_remove),
        .suspend         = smc911x_drv_suspend,
        .resume  = smc911x_drv_resume,
        .driver  = {
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index fc80f250da31..35c56abf4113 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1696,7 +1696,7 @@ static const struct ethtool_ops smc_ethtool_ops = {
 * I just deleted auto_irq.c, since it was never built...
 *   --jgarzik
 */
-static int __init smc_findirq(struct smc_local *lp)
+static int __devinit smc_findirq(struct smc_local *lp)
 {
        void __iomem *ioaddr = lp->base;
        int timeout = 20;
@@ -1770,7 +1770,7 @@ static int __init smc_findirq(struct smc_local *lp)
 * o  actually GRAB the irq.
 * o  GRAB the region
 */
-static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
+static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr,
                            unsigned long irq_flags)
 {
        struct smc_local *lp = netdev_priv(dev);
@@ -2126,7 +2126,7 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device *
 *      0 --> there is a device
 *      anything else, error
 */
-static int smc_drv_probe(struct platform_device *pdev)
+static int __devinit smc_drv_probe(struct platform_device *pdev)
 {
        struct smc91x_platdata *pd = pdev->dev.platform_data;
        struct smc_local *lp;
@@ -2240,7 +2240,7 @@ static int smc_drv_probe(struct platform_device *pdev)
        return ret;
 }
-static int smc_drv_remove(struct platform_device *pdev)
+static int __devexit smc_drv_remove(struct platform_device *pdev)
 {
        struct net_device *ndev = platform_get_drvdata(pdev);
        struct smc_local *lp = netdev_priv(ndev);
@@ -2305,7 +2305,7 @@ static int smc_drv_resume(struct platform_device *dev)
 static struct platform_driver smc_driver = {
        .probe          = smc_drv_probe,
-        .remove         = smc_drv_remove,
+        .remove         = __devexit_p(smc_drv_remove),
        .suspend        = smc_drv_suspend,
        .resume         = smc_drv_resume,
        .driver         = {
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index e12cdb4543b4..de57490103fc 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1102,12 +1102,14 @@ static int ax88178_link_reset(struct usbnet *dev)
        mode = AX88178_MEDIUM_DEFAULT;
        if (ecmd.speed == SPEED_1000)
-                mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK;
+                mode |= AX_MEDIUM_GM;
        else if (ecmd.speed == SPEED_100)
                mode |= AX_MEDIUM_PS;
        else
                mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
+        mode |= AX_MEDIUM_ENCK;
        if (ecmd.duplex == DUPLEX_FULL)
                mode |= AX_MEDIUM_FD;
        else
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 8d690a0eb1a9..444c5cc05f03 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1384,7 +1384,7 @@ void iwl_rx_handle(struct iwl_priv *priv)
                rxq->queue[i] = NULL;
-                pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr,
+                pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->aligned_dma_addr,
                                            priv->hw_params.rx_buf_size,
                                            PCI_DMA_FROMDEVICE);
                pkt = (struct iwl_rx_packet *)rxb->skb->data;
@@ -1436,8 +1436,8 @@ void iwl_rx_handle(struct iwl_priv *priv)
                        rxb->skb = NULL;
                }
-                pci_unmap_single(priv->pci_dev, rxb->dma_addr,
+                pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
-                                 priv->hw_params.rx_buf_size,
+                                 priv->hw_params.rx_buf_size + 256,
                                 PCI_DMA_FROMDEVICE);
                spin_lock_irqsave(&rxq->lock, flags);
                list_add_tail(&rxb->list, &priv->rxq.rx_used);
@@ -2341,7 +2341,6 @@ static void iwl_bg_alive_start(struct work_struct *data)
        mutex_lock(&priv->mutex);
        iwl_alive_start(priv);
        mutex_unlock(&priv->mutex);
-        ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
 }
 static void iwl4965_bg_rf_kill(struct work_struct *work)
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index c018121085e9..9966d4e384ce 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -89,7 +89,8 @@ extern struct iwl_cfg iwl5100_abg_cfg;
 #define DEFAULT_LONG_RETRY_LIMIT  4U
 struct iwl_rx_mem_buffer {
-        dma_addr_t dma_addr;
+        dma_addr_t real_dma_addr;
+        dma_addr_t aligned_dma_addr;
        struct sk_buff *skb;
        struct list_head list;
 };
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 7cde9d76ff5d..0509c16dbe75 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -204,7 +204,7 @@ int iwl_rx_queue_restock(struct iwl_priv *priv)
                list_del(element);
                /* Point to Rx buffer via next RBD in circular buffer */
-                rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->dma_addr);
+                rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->aligned_dma_addr);
                rxq->queue[rxq->write] = rxb;
                rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
                rxq->free_count--;
@@ -251,7 +251,7 @@ void iwl_rx_allocate(struct iwl_priv *priv)
                rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
                /* Alloc a new receive buffer */
-                rxb->skb = alloc_skb(priv->hw_params.rx_buf_size,
+                rxb->skb = alloc_skb(priv->hw_params.rx_buf_size + 256,
                                __GFP_NOWARN | GFP_ATOMIC);
                if (!rxb->skb) {
                        if (net_ratelimit())
@@ -266,9 +266,17 @@ void iwl_rx_allocate(struct iwl_priv *priv)
                list_del(element);
                /* Get physical address of RB/SKB */
-                rxb->dma_addr =
+                rxb->real_dma_addr = pci_map_single(
-                    pci_map_single(priv->pci_dev, rxb->skb->data,
+                                        priv->pci_dev,
-                           priv->hw_params.rx_buf_size, PCI_DMA_FROMDEVICE);
+                                        rxb->skb->data,
+                                        priv->hw_params.rx_buf_size + 256,
+                                        PCI_DMA_FROMDEVICE);
+                /* dma address must be no more than 36 bits */
+                BUG_ON(rxb->real_dma_addr & ~DMA_BIT_MASK(36));
+                /* and also 256 byte aligned! */
+                rxb->aligned_dma_addr = ALIGN(rxb->real_dma_addr, 256);
+                skb_reserve(rxb->skb, rxb->aligned_dma_addr - rxb->real_dma_addr);
                list_add_tail(&rxb->list, &rxq->rx_free);
                rxq->free_count++;
        }
@@ -300,8 +308,8 @@ void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
        for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
                if (rxq->pool[i].skb != NULL) {
                        pci_unmap_single(priv->pci_dev,
-                                         rxq->pool[i].dma_addr,
+                                         rxq->pool[i].real_dma_addr,
-                                         priv->hw_params.rx_buf_size,
+                                         priv->hw_params.rx_buf_size + 256,
                                         PCI_DMA_FROMDEVICE);
                        dev_kfree_skb(rxq->pool[i].skb);
                }
@@ -354,8 +362,8 @@ void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
                 * to an SKB, so we need to unmap and free potential storage */
                if (rxq->pool[i].skb != NULL) {
                        pci_unmap_single(priv->pci_dev,
-                                         rxq->pool[i].dma_addr,
+                                         rxq->pool[i].real_dma_addr,
-                                         priv->hw_params.rx_buf_size,
+                                         priv->hw_params.rx_buf_size + 256,
                                         PCI_DMA_FROMDEVICE);
                        priv->alloc_rxb_skb--;
                        dev_kfree_skb(rxq->pool[i].skb);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 285b53e7e261..45a6b0c35695 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -6012,7 +6012,6 @@ static void iwl3945_bg_alive_start(struct work_struct *data)
        mutex_lock(&priv->mutex);
        iwl3945_alive_start(priv);
        mutex_unlock(&priv->mutex);
-        ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
 }
 static void iwl3945_bg_rf_kill(struct work_struct *work)
diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c
index 1cc03a8dd67a..59634c33b1f9 100644
--- a/drivers/net/wireless/libertas_tf/if_usb.c
+++ b/drivers/net/wireless/libertas_tf/if_usb.c
@@ -331,7 +331,7 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp,
        /* Fill the receive configuration URB and initialise the Rx call back */
        usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
                          usb_rcvbulkpipe(cardp->udev, cardp->ep_in),
-                          (void *) (skb->tail),
+                          skb_tail_pointer(skb),
                          MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, cardp);
        cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET;
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index c6948d8f53f6..6d017adc914a 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1785,7 +1785,7 @@ static int __devexit xennet_remove(struct xenbus_device *dev)
        return 0;
 }
-static struct xenbus_driver netfront = {
+static struct xenbus_driver netfront_driver = {
        .name = "vif",
        .owner = THIS_MODULE,
        .ids = netfront_ids,
@@ -1805,7 +1805,7 @@ static int __init netif_init(void)
        printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n");
-        return xenbus_register_frontend(&netfront);
+        return xenbus_register_frontend(&netfront_driver);
 }
 module_init(netif_init);
@@ -1815,7 +1815,7 @@ static void __exit netif_exit(void)
        if (xen_initial_domain())
                return;
-        xenbus_unregister_driver(&netfront);
+        xenbus_unregister_driver(&netfront_driver);
 }
 module_exit(netif_exit);
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 209b4a464bcf..855f389eea40 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -36,7 +36,7 @@ if PARPORT
 config PARPORT_PC
        tristate "PC-style hardware"
        depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
-                (!M68K || ISA) && !MN10300 && !AVR32
+                (!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN
        ---help---
          You should say Y here if you have a PC-style parallel port. All
          IBM PC compatible computers and some Alphas have PC-style
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index a2692724b68f..5c8baa43ac9c 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -1655,12 +1655,14 @@ int __init init_dmars(void)
                        iommu->flush.flush_context = __iommu_flush_context;
                        iommu->flush.flush_iotlb = __iommu_flush_iotlb;
                        printk(KERN_INFO "IOMMU 0x%Lx: using Register based "
-                               "invalidation\n", drhd->reg_base_addr);
+                               "invalidation\n",
+                               (unsigned long long)drhd->reg_base_addr);
                } else {
                        iommu->flush.flush_context = qi_flush_context;
                        iommu->flush.flush_iotlb = qi_flush_iotlb;
                        printk(KERN_INFO "IOMMU 0x%Lx: using Queued "
-                               "invalidation\n", drhd->reg_base_addr);
+                               "invalidation\n",
+                               (unsigned long long)drhd->reg_base_addr);
                }
        }
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 21f2ac639cab..061d1ee0046a 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1832,7 +1832,7 @@ int pci_reset_function(struct pci_dev *dev)
        if (!(cap & PCI_EXP_DEVCAP_FLR))
                return -ENOTTY;
-        if (!dev->msi_enabled && !dev->msix_enabled)
+        if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0)
                disable_irq(dev->irq);
        pci_save_state(dev);
@@ -1841,7 +1841,7 @@ int pci_reset_function(struct pci_dev *dev)
        r = pci_execute_reset_function(dev);
        pci_restore_state(dev);
-        if (!dev->msi_enabled && !dev->msix_enabled)
+        if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0)
                enable_irq(dev->irq);
        return r;
@@ -2042,7 +2042,7 @@ static int __devinit pci_init(void)
        return 0;
 }
-static int __devinit pci_setup(char *str)
+static int __init pci_setup(char *str)
 {
        while (str) {
                char *k = strchr(str, ',');
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index a926c896475e..643a6b98462b 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -879,7 +879,7 @@ static void rio_update_route_tables(struct rio_mport *port)
 * link, then start recursive peer enumeration. Returns %0 if
 * enumeration succeeds or %-EBUSY if enumeration fails.
 */
-int rio_enum_mport(struct rio_mport *mport)
+int __devinit rio_enum_mport(struct rio_mport *mport)
 {
        struct rio_net *net = NULL;
        int rc = 0;
@@ -972,7 +972,7 @@ static void rio_enum_timeout(unsigned long data)
 * peer discovery. Returns %0 if discovery succeeds or %-EBUSY
 * on failure.
 */
-int rio_disc_mport(struct rio_mport *mport)
+int __devinit rio_disc_mport(struct rio_mport *mport)
 {
        struct rio_net *net = NULL;
        int enum_timeout_flag = 0;
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 680661abbc4b..6395c780008b 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -467,7 +467,7 @@ static int __devinit rio_init(void)
 device_initcall(rio_init);
-int rio_init_mports(void)
+int __devinit rio_init_mports(void)
 {
        int rc = 0;
        struct rio_mport *port;
diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c
index f08e169ba1b5..054f5dd58931 100644
--- a/drivers/sbus/char/bbc_i2c.c
+++ b/drivers/sbus/char/bbc_i2c.c
@@ -361,7 +361,7 @@ fail:
 extern int bbc_envctrl_init(struct bbc_i2c_bus *bp);
 extern void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp);
-static int __devinit bbc_i2c_probe(struct of_device *op,
+static int __init bbc_i2c_probe(struct of_device *op,
                                   const struct of_device_id *match)
 {
        struct bbc_i2c_bus *bp;
@@ -386,7 +386,7 @@ static int __devinit bbc_i2c_probe(struct of_device *op,
        return err;
 }
-static int __devexit bbc_i2c_remove(struct of_device *op)
+static int __exit bbc_i2c_remove(struct of_device *op)
 {
        struct bbc_i2c_bus *bp = dev_get_drvdata(&op->dev);
@@ -417,7 +417,7 @@ static struct of_platform_driver bbc_i2c_driver = {
        .name           = "bbc_i2c",
        .match_table    = bbc_i2c_match,
        .probe          = bbc_i2c_probe,
-        .remove         = __devexit_p(bbc_i2c_remove),
+        .remove         = __exit_p(bbc_i2c_remove),
 };
 static int __init bbc_i2c_init(void)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 218777bfc143..399fe559e4de 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -13872,8 +13872,10 @@ static int __devinit advansys_board_found(struct Scsi_Host *shost,
        advansys_wide_free_mem(boardp);
        free_irq(boardp->irq, shost);
 err_free_dma:
+#ifdef CONFIG_ISA
        if (shost->dma_channel != NO_ISA_DMA)
                free_dma(shost->dma_channel);
+#endif
 err_free_proc:
        kfree(boardp->prtbuf);
 err_unmap:
@@ -13894,10 +13896,12 @@ static int advansys_release(struct Scsi_Host *shost)
        ASC_DBG(1, "begin\n");
        scsi_remove_host(shost);
        free_irq(board->irq, shost);
+#ifdef CONFIG_ISA
        if (shost->dma_channel != NO_ISA_DMA) {
                ASC_DBG(1, "free_dma()\n");
                free_dma(shost->dma_channel);
        }
+#endif
        if (ASC_NARROW_BOARD(board)) {
                dma_unmap_single(board->dev,
                                        board->dvc_var.asc_dvc_var.overrun_dma,
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index c387c15a2128..fb247fdfa2bd 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -588,7 +588,7 @@ static struct pci_driver gdth_pci_driver = {
        .remove         = gdth_pci_remove_one,
 };
-static void gdth_pci_remove_one(struct pci_dev *pdev)
+static void __devexit gdth_pci_remove_one(struct pci_dev *pdev)
 {
        gdth_ha_str *ha = pci_get_drvdata(pdev);
@@ -600,7 +600,7 @@ static void gdth_pci_remove_one(struct pci_dev *pdev)
        pci_disable_device(pdev);
 }
-static int gdth_pci_init_one(struct pci_dev *pdev,
+static int __devinit gdth_pci_init_one(struct pci_dev *pdev,
                                       const struct pci_device_id *ent)
 {
        ushort vendor = pdev->vendor;
@@ -853,7 +853,7 @@ static int __init gdth_init_isa(ulong32 bios_adr,gdth_ha_str *ha)
 #endif /* CONFIG_ISA */
 #ifdef CONFIG_PCI
-static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
+static int __devinit gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
                                   gdth_ha_str *ha)
 {
    register gdt6_dpram_str __iomem *dp6_ptr;
@@ -1237,7 +1237,7 @@ static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
 /* controller protocol functions */
-static void __init gdth_enable_int(gdth_ha_str *ha)
+static void __devinit gdth_enable_int(gdth_ha_str *ha)
 {
    ulong flags;
    gdt2_dpram_str __iomem *dp2_ptr;
@@ -1553,7 +1553,7 @@ static int gdth_internal_cmd(gdth_ha_str *ha, unchar service, ushort opcode,
 /* search for devices */
-static int __init gdth_search_drives(gdth_ha_str *ha)
+static int __devinit gdth_search_drives(gdth_ha_str *ha)
 {
    ushort cdev_cnt, i;
    int ok;
@@ -4935,7 +4935,7 @@ static int __init gdth_eisa_probe_one(ushort eisa_slot)
 #endif /* CONFIG_EISA */
 #ifdef CONFIG_PCI
-static int gdth_pci_probe_one(gdth_pci_str *pcistr,
+static int __devinit gdth_pci_probe_one(gdth_pci_str *pcistr,
                             gdth_ha_str **ha_out)
 {
        struct Scsi_Host *shp;
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index dae87b1a4c6e..cf12f2d84be2 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -352,21 +352,21 @@ static int map_dma_buffers(struct driver_data *drv_data)
        } else
                drv_data->tx_map_len = drv_data->len;
-        /* Stream map the rx buffer */
+        /* Stream map the tx buffer. Always do DMA_TO_DEVICE first
-        drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
+         * so we flush the cache *before* invalidating it, in case
-                                                drv_data->rx_map_len,
+         * the tx and rx buffers overlap.
-                                                DMA_FROM_DEVICE);
+         */
-        if (dma_mapping_error(dev, drv_data->rx_dma))
-                return 0;
-        /* Stream map the tx buffer */
        drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
-                                                drv_data->tx_map_len,
+                                        drv_data->tx_map_len, DMA_TO_DEVICE);
-                                                DMA_TO_DEVICE);
+        if (dma_mapping_error(dev, drv_data->tx_dma))
+                return 0;
-        if (dma_mapping_error(dev, drv_data->tx_dma)) {
+        /* Stream map the rx buffer */
-                dma_unmap_single(dev, drv_data->rx_dma,
+        drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
                                        drv_data->rx_map_len, DMA_FROM_DEVICE);
+        if (dma_mapping_error(dev, drv_data->rx_dma)) {
+                dma_unmap_single(dev, drv_data->tx_dma,
+                                        drv_data->tx_map_len, DMA_TO_DEVICE);
                return 0;
        }
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 61ba147e384d..0b4db0ce78d6 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -506,20 +506,6 @@ static int map_dma_buffers(struct driver_data *drv_data)
        if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
                return -1;
-        /* NULL rx means write-only transfer and no map needed
-           since rx DMA will not be used */
-        if (drv_data->rx) {
-                buf = drv_data->rx;
-                drv_data->rx_dma = dma_map_single(
-                                        dev,
-                                        buf,
-                                        drv_data->len,
-                                        DMA_FROM_DEVICE);
-                if (dma_mapping_error(dev, drv_data->rx_dma))
-                        return -1;
-                drv_data->rx_dma_needs_unmap = 1;
-        }
        if (drv_data->tx == NULL) {
                /* Read only message --> use drv_data->dummy_dma_buf for dummy
                   writes to achive reads */
@@ -533,18 +519,31 @@ static int map_dma_buffers(struct driver_data *drv_data)
                                        buf,
                                        drv_data->tx_map_len,
                                        DMA_TO_DEVICE);
-        if (dma_mapping_error(dev, drv_data->tx_dma)) {
+        if (dma_mapping_error(dev, drv_data->tx_dma))
-                if (drv_data->rx_dma) {
-                        dma_unmap_single(dev,
-                                        drv_data->rx_dma,
-                                        drv_data->len,
-                                        DMA_FROM_DEVICE);
-                        drv_data->rx_dma_needs_unmap = 0;
-                }
                return -1;
-        }
        drv_data->tx_dma_needs_unmap = 1;
+        /* NULL rx means write-only transfer and no map needed
+         * since rx DMA will not be used */
+        if (drv_data->rx) {
+                buf = drv_data->rx;
+                drv_data->rx_dma = dma_map_single(dev,
+                                                buf,
+                                                drv_data->len,
+                                                DMA_FROM_DEVICE);
+                if (dma_mapping_error(dev, drv_data->rx_dma)) {
+                        if (drv_data->tx_dma) {
+                                dma_unmap_single(dev,
+                                                drv_data->tx_dma,
+                                                drv_data->tx_map_len,
+                                                DMA_TO_DEVICE);
+                                drv_data->tx_dma_needs_unmap = 0;
+                        }
+                        return -1;
+                }
+                drv_data->rx_dma_needs_unmap = 1;
+        }
        return 0;
 }
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 659b3d9671c4..428b5993575a 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -172,7 +172,6 @@ static struct usb_interface_descriptor rndis_data_intf __initdata = {
        .bDescriptorType =      USB_DT_INTERFACE,
        /* .bInterfaceNumber = DYNAMIC */
-        .bAlternateSetting =    1,
        .bNumEndpoints =        2,
        .bInterfaceClass =      USB_CLASS_CDC_DATA,
        .bInterfaceSubClass =   0,
@@ -303,7 +302,7 @@ static void rndis_response_available(void *_rndis)
        __le32                          *data = req->buf;
        int                             status;
-        if (atomic_inc_return(&rndis->notify_count))
+        if (atomic_inc_return(&rndis->notify_count) != 1)
                return;
        /* Send RNDIS RESPONSE_AVAILABLE notification; a
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index da6e93c201d2..2dbc0db0b46c 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -141,7 +141,11 @@ static int is_vbus_present(void)
        if (mach->gpio_vbus) {
                int value = gpio_get_value(mach->gpio_vbus);
-                return mach->gpio_vbus_inverted ? !value : value;
+                if (mach->gpio_vbus_inverted)
+                        return !value;
+                else
+                        return !!value;
        }
        if (mach->udc_is_connected)
                return mach->udc_is_connected();
@@ -982,7 +986,7 @@ static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
        struct pxa25x_udc       *udc;
        udc = container_of(_gadget, struct pxa25x_udc, gadget);
-        udc->vbus = (is_active != 0);
+        udc->vbus = is_active;
        DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
        pullup(udc);
        return 0;
@@ -1399,12 +1403,8 @@ lubbock_vbus_irq(int irq, void *_dev)
 static irqreturn_t udc_vbus_irq(int irq, void *_dev)
 {
        struct pxa25x_udc       *dev = _dev;
-        int                     vbus = gpio_get_value(dev->mach->gpio_vbus);
-        if (dev->mach->gpio_vbus_inverted)
+        pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present());
-                vbus = !vbus;
-        pxa25x_udc_vbus_session(&dev->gadget, vbus);
        return IRQ_HANDLED;
 }
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index c46a58f9181d..9d0ea573aef6 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -66,6 +66,8 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 {
        struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
        struct pci_dev          *pdev = to_pci_dev(hcd->self.controller);
+        struct pci_dev          *p_smbus;
+        u8                      rev;
        u32                     temp;
        int                     retval;
@@ -166,6 +168,25 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
                        pci_write_config_byte(pdev, 0x4b, tmp | 0x20);
                }
                break;
+        case PCI_VENDOR_ID_ATI:
+                /* SB700 old version has a bug in EHCI controller,
+                 * which causes usb devices lose response in some cases.
+                 */
+                if (pdev->device == 0x4396) {
+                        p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
+                                                 PCI_DEVICE_ID_ATI_SBX00_SMBUS,
+                                                 NULL);
+                        if (!p_smbus)
+                                break;
+                        rev = p_smbus->revision;
+                        if ((rev == 0x3a) || (rev == 0x3b)) {
+                                u8 tmp;
+                                pci_read_config_byte(pdev, 0x53, &tmp);
+                                pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
+                        }
+                        pci_dev_put(p_smbus);
+                }
+                break;
        }
        ehci_reset(ehci);
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index c9de3f027aab..e06810aef2df 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -687,7 +687,10 @@ static ssize_t mon_bin_read(struct file *file, char __user *buf,
        }
        if (rp->b_read >= sizeof(struct mon_bin_hdr)) {
-                step_len = min(nbytes, (size_t)ep->len_cap);
+                step_len = ep->len_cap;
+                step_len -= rp->b_read - sizeof(struct mon_bin_hdr);
+                if (step_len > nbytes)
+                        step_len = nbytes;
                offset = rp->b_out + PKT_SIZE;
                offset += rp->b_read - sizeof(struct mon_bin_hdr);
                if (offset >= rp->b_size)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index e45e70bcc5e2..cc64462d4c4e 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1757,7 +1757,7 @@ static int musb_schedule(
                }
        }
        /* use bulk reserved ep1 if no other ep is free */
-        if (best_end > 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
+        if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
                hw_ep = musb->bulk_ep;
                if (is_in)
                        head = &musb->in_bulk;
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 9035d7256b03..cfaf1f085535 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -56,6 +56,7 @@ static void cp2101_shutdown(struct usb_serial *);
 static int debug;
 static struct usb_device_id id_table [] = {
+        { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
        { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
        { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
        { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index d4e5fc86e43c..6da9a7a962a8 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -167,6 +167,13 @@ UNUSUAL_DEV(  0x0421, 0x005d, 0x0001, 0x0600,
                US_SC_DEVICE, US_PR_DEVICE, NULL,
                US_FL_FIX_CAPACITY ),
+/* Patch for Nokia 5310 capacity */
+UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0591,
+                "Nokia",
+                "5310",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY ),
 /* Reported by Mario Rettig <mariorettig@web.de> */
 UNUSUAL_DEV(  0x0421, 0x042e, 0x0100, 0x0100,
                "Nokia",
@@ -233,14 +240,14 @@ UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
                US_FL_MAX_SECTORS_64 ),
 /* Reported by Cedric Godin <cedric@belbone.be> */
-UNUSUAL_DEV(  0x0421, 0x04b9, 0x0551, 0x0551,
+UNUSUAL_DEV(  0x0421, 0x04b9, 0x0500, 0x0551,
                "Nokia",
                "5300",
                US_SC_DEVICE, US_PR_DEVICE, NULL,
                US_FL_FIX_CAPACITY ),
 /* Reported by Richard Nauber <RichardNauber@web.de> */
-UNUSUAL_DEV(  0x0421, 0x04fa, 0x0601, 0x0601,
+UNUSUAL_DEV(  0x0421, 0x04fa, 0x0550, 0x0660,
                "Nokia",
                "6300",
                US_SC_DEVICE, US_PR_DEVICE, NULL,
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index f8d0a57a07cb..9a577a800db5 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -132,7 +132,7 @@ static void init_backlight(struct atmel_lcdfb_info *sinfo)
        bl = backlight_device_register("backlight", &sinfo->pdev->dev,
                        sinfo, &atmel_lcdc_bl_ops);
-        if (IS_ERR(sinfo->backlight)) {
+        if (IS_ERR(bl)) {
                dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
                                PTR_ERR(bl));
                return;
diff --git a/drivers/video/backlight/da903x.c b/drivers/video/backlight/da903x.c
index 242c38250166..93bb4340cc64 100644
--- a/drivers/video/backlight/da903x.c
+++ b/drivers/video/backlight/da903x.c
@@ -119,6 +119,7 @@ static int da903x_backlight_probe(struct platform_device *pdev)
        default:
                dev_err(&pdev->dev, "invalid backlight device ID(%d)\n",
                                pdev->id);
+                kfree(data);
                return -EINVAL;
        }
@@ -130,6 +131,7 @@ static int da903x_backlight_probe(struct platform_device *pdev)
                        data, &da903x_backlight_ops);
        if (IS_ERR(bl)) {
                dev_err(&pdev->dev, "failed to register backlight\n");
+                kfree(data);
                return PTR_ERR(bl);
        }
diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index 8e1731d3b228..680e57b616cd 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -42,10 +42,13 @@ static int fb_notifier_callback(struct notifier_block *self,
        mutex_lock(&ld->ops_lock);
        if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) {
-                if (event == FB_EVENT_BLANK)
+                if (event == FB_EVENT_BLANK) {
-                        ld->ops->set_power(ld, *(int *)evdata->data);
+                        if (ld->ops->set_power)
-                else
+                                ld->ops->set_power(ld, *(int *)evdata->data);
-                        ld->ops->set_mode(ld, evdata->data);
+                } else {
+                        if (ld->ops->set_mode)
+                                ld->ops->set_mode(ld, evdata->data);
+                }
        }
        mutex_unlock(&ld->ops_lock);
        return 0;
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index 8a8760230bc7..a2aa6ddffbe2 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -2462,8 +2462,7 @@ static int __init cirrusfb_init(void)
 #ifndef MODULE
 static int __init cirrusfb_setup(char *options) {
-        char *this_opt, s[32];
+        char *this_opt;
-        int i;
        DPRINTK("ENTER\n");
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 1d5ae39cb271..3c65b0d67617 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -230,7 +230,7 @@ static void fb_set_logo_directpalette(struct fb_info *info,
        greenshift = info->var.green.offset;
        blueshift = info->var.blue.offset;
-        for (i = 32; i < logo->clutsize; i++)
+        for (i = 32; i < 32 + logo->clutsize; i++)
                palette[i] = i << redshift | i << greenshift | i << blueshift;
 }
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 99da8b6d2c36..ed13889c1162 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -23,7 +23,6 @@ objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o
 objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
 objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
 objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
-objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o
 omapfb-objs := $(objs-yy)
diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c
deleted file mode 100644
index e55de201b8ff..000000000000
--- a/drivers/video/omap/lcd_sx1.c
+++ /dev/null
@@ -1,327 +0,0 @@
-/*
- * LCD panel support for the Siemens SX1 mobile phone
- *
- * Current version : Vovan888@gmail.com, great help from FCA00000
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <mach/gpio.h>
-#include <mach/omapfb.h>
-#include <mach/mcbsp.h>
-#include <mach/mux.h>
-/*
- * OMAP310 GPIO registers
- */
-#define GPIO_DATA_INPUT         0xfffce000
-#define GPIO_DATA_OUTPUT        0xfffce004
-#define GPIO_DIR_CONTROL        0xfffce008
-#define GPIO_INT_CONTROL        0xfffce00c
-#define GPIO_INT_MASK           0xfffce010
-#define GPIO_INT_STATUS         0xfffce014
-#define GPIO_PIN_CONTROL        0xfffce018
-#define A_LCD_SSC_RD    3
-#define A_LCD_SSC_SD    7
-#define _A_LCD_RESET    9
-#define _A_LCD_SSC_CS   12
-#define _A_LCD_SSC_A0   13
-#define DSP_REG         0xE1017024
-const unsigned char INIT_1[12] = {
-        0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00
-};
-const unsigned char INIT_2[127] = {
-        0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00,
-        0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00,
-        0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00,
-        0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01,
-        0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01,
-        0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01,
-        0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01,
-        0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01,
-        0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01,
-        0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01,
-        0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01,
-        0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01,
-        0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01,
-        0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01,
-        0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02,
-        0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00
-};
-const unsigned char INIT_3[15] = {
-        0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59,
-        0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF
-};
-static void epson_sendbyte(int flag, unsigned char byte)
-{
-        int i, shifter = 0x80;
-        if (!flag)
-                gpio_set_value(_A_LCD_SSC_A0, 0);
-        mdelay(2);
-        gpio_set_value(A_LCD_SSC_RD, 1);
-        gpio_set_value(A_LCD_SSC_SD, flag);
-        OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
-        OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
-        for (i = 0; i < 8; i++) {
-                OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
-                gpio_set_value(A_LCD_SSC_SD, shifter & byte);
-                OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
-                shifter >>= 1;
-        }
-        gpio_set_value(_A_LCD_SSC_A0, 1);
-}
-static void init_system(void)
-{
-        omap_mcbsp_request(OMAP_MCBSP3);
-        omap_mcbsp_stop(OMAP_MCBSP3);
-}
-static void setup_GPIO(void)
-{
-        /* new wave */
-        gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd");
-        gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd");
-        gpio_request(_A_LCD_RESET, "lcd_reset");
-        gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs");
-        gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0");
-        /* set GPIOs to output, with initial data */
-        gpio_direction_output(A_LCD_SSC_RD, 1);
-        gpio_direction_output(A_LCD_SSC_SD, 0);
-        gpio_direction_output(_A_LCD_RESET, 0);
-        gpio_direction_output(_A_LCD_SSC_CS, 1);
-        gpio_direction_output(_A_LCD_SSC_A0, 1);
-}
-static void display_init(void)
-{
-        int i;
-        omap_cfg_reg(MCBSP3_CLKX);
-        mdelay(2);
-        setup_GPIO();
-        mdelay(2);
-        /* reset LCD */
-        gpio_set_value(A_LCD_SSC_SD, 1);
-        epson_sendbyte(0, 0x25);
-        gpio_set_value(_A_LCD_RESET, 0);
-        mdelay(10);
-        gpio_set_value(_A_LCD_RESET, 1);
-        gpio_set_value(_A_LCD_SSC_CS, 1);
-        mdelay(2);
-        gpio_set_value(_A_LCD_SSC_CS, 0);
-        /* init LCD, phase 1 */
-        epson_sendbyte(0, 0xCA);
-        for (i = 0; i < 10; i++)
-                epson_sendbyte(1, INIT_1[i]);
-        gpio_set_value(_A_LCD_SSC_CS, 1);
-        gpio_set_value(_A_LCD_SSC_CS, 0);
-        /* init LCD phase 2 */
-        epson_sendbyte(0, 0xCB);
-        for (i = 0; i < 125; i++)
-                epson_sendbyte(1, INIT_2[i]);
-        gpio_set_value(_A_LCD_SSC_CS, 1);
-        gpio_set_value(_A_LCD_SSC_CS, 0);
-        /* init LCD phase 2a */
-        epson_sendbyte(0, 0xCC);
-        for (i = 0; i < 14; i++)
-                epson_sendbyte(1, INIT_3[i]);
-        gpio_set_value(_A_LCD_SSC_CS, 1);
-        gpio_set_value(_A_LCD_SSC_CS, 0);
-        /* init LCD phase 3 */
-        epson_sendbyte(0, 0xBC);
-        epson_sendbyte(1, 0x08);
-        gpio_set_value(_A_LCD_SSC_CS, 1);
-        gpio_set_value(_A_LCD_SSC_CS, 0);
-        /* init LCD phase 4 */
-        epson_sendbyte(0, 0x07);
-        epson_sendbyte(1, 0x05);
-        gpio_set_value(_A_LCD_SSC_CS, 1);
-        gpio_set_value(_A_LCD_SSC_CS, 0);
-        /* init LCD phase 5 */
-        epson_sendbyte(0, 0x94);
-        gpio_set_value(_A_LCD_SSC_CS, 1);
-        gpio_set_value(_A_LCD_SSC_CS, 0);
-        /* init LCD phase 6 */
-        epson_sendbyte(0, 0xC6);
-        epson_sendbyte(1, 0x80);
-        gpio_set_value(_A_LCD_SSC_CS, 1);
-        mdelay(100); /* used to be 1000 */
-        gpio_set_value(_A_LCD_SSC_CS, 0);
-        /* init LCD phase 7 */
-        epson_sendbyte(0, 0x16);
-        epson_sendbyte(1, 0x02);
-        epson_sendbyte(1, 0x00);
-        epson_sendbyte(1, 0xB1);
-        epson_sendbyte(1, 0x00);
-        gpio_set_value(_A_LCD_SSC_CS, 1);
-        gpio_set_value(_A_LCD_SSC_CS, 0);
-        /* init LCD phase 8 */
-        epson_sendbyte(0, 0x76);
-        epson_sendbyte(1, 0x00);
-        epson_sendbyte(1, 0x00);
-        epson_sendbyte(1, 0xDB);
-        epson_sendbyte(1, 0x00);
-        gpio_set_value(_A_LCD_SSC_CS, 1);
-        gpio_set_value(_A_LCD_SSC_CS, 0);
-        /* init LCD phase 9 */
-        epson_sendbyte(0, 0xAF);
-        gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
-{
-        return 0;
-}
-static void sx1_panel_cleanup(struct lcd_panel *panel)
-{
-}
-static void sx1_panel_disable(struct lcd_panel *panel)
-{
-        printk(KERN_INFO "SX1: LCD panel disable\n");
-        sx1_setmmipower(0);
-        gpio_set_value(_A_LCD_SSC_CS, 1);
-        epson_sendbyte(0, 0x25);
-        gpio_set_value(_A_LCD_SSC_CS, 0);
-        epson_sendbyte(0, 0xAE);
-        gpio_set_value(_A_LCD_SSC_CS, 1);
-        mdelay(100);
-        gpio_set_value(_A_LCD_SSC_CS, 0);
-        epson_sendbyte(0, 0x95);
-        gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-static int sx1_panel_enable(struct lcd_panel *panel)
-{
-        printk(KERN_INFO "lcd_sx1: LCD panel enable\n");
-        init_system();
-        display_init();
-        sx1_setmmipower(1);
-        sx1_setbacklight(0x18);
-        sx1_setkeylight (0x06);
-        return 0;
-}
-static unsigned long sx1_panel_get_caps(struct lcd_panel *panel)
-{
-        return 0;
-}
-struct lcd_panel sx1_panel = {
-        .name           = "sx1",
-        .config         = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
-                          OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK |
-                          OMAP_LCDC_INV_OUTPUT_EN,
-        .x_res          = 176,
-        .y_res          = 220,
-        .data_lines     = 16,
-        .bpp            = 16,
-        .hsw            = 5,
-        .hfp            = 5,
-        .hbp            = 5,
-        .vsw            = 2,
-        .vfp            = 1,
-        .vbp            = 1,
-        .pixel_clock    = 1500,
-        .init           = sx1_panel_init,
-        .cleanup        = sx1_panel_cleanup,
-        .enable         = sx1_panel_enable,
-        .disable        = sx1_panel_disable,
-        .get_caps       = sx1_panel_get_caps,
-};
-static int sx1_panel_probe(struct platform_device *pdev)
-{
-        omapfb_register_panel(&sx1_panel);
-        return 0;
-}
-static int sx1_panel_remove(struct platform_device *pdev)
-{
-        return 0;
-}
-static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
-        return 0;
-}
-static int sx1_panel_resume(struct platform_device *pdev)
-{
-        return 0;
-}
-struct platform_driver sx1_panel_driver = {
-        .probe          = sx1_panel_probe,
-        .remove         = sx1_panel_remove,
-        .suspend        = sx1_panel_suspend,
-        .resume         = sx1_panel_resume,
-        .driver = {
-                .name   = "lcd_sx1",
-                .owner  = THIS_MODULE,
-        },
-};
-static int sx1_panel_drv_init(void)
-{
-        return platform_driver_register(&sx1_panel_driver);
-}
-static void sx1_panel_drv_cleanup(void)
-{
-        platform_driver_unregister(&sx1_panel_driver);
-}
-module_init(sx1_panel_drv_init);
-module_exit(sx1_panel_drv_cleanup);
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 97204497d9f7..cc59c52e1103 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -804,6 +804,9 @@ static int pxafb_smart_thread(void *arg)
 static int pxafb_smart_init(struct pxafb_info *fbi)
 {
+        if (!(fbi->lccr0 | LCCR0_LCDT))
+                return 0;
        fbi->smart_thread = kthread_run(pxafb_smart_thread, fbi,
                                        "lcd_refresh");
        if (IS_ERR(fbi->smart_thread)) {
@@ -1372,7 +1375,7 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi,
        fbi->cmap_inverse       = inf->cmap_inverse;
        fbi->cmap_static        = inf->cmap_static;
-        switch (lcd_conn & 0xf) {
+        switch (lcd_conn & LCD_TYPE_MASK) {
        case LCD_TYPE_MONO_STN:
                fbi->lccr0 = LCCR0_CMS;
                break;
diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c
index 2a380011e9ba..7baf2dd12d50 100644
--- a/drivers/video/tmiofb.c
+++ b/drivers/video/tmiofb.c
@@ -222,6 +222,9 @@ static irqreturn_t tmiofb_irq(int irq, void *__info)
        unsigned int bbisc = tmio_ioread16(par->lcr + LCR_BBISC);
+        tmio_iowrite16(bbisc, par->lcr + LCR_BBISC);
+#ifdef CONFIG_FB_TMIO_ACCELL
        /*
         * We were in polling mode and now we got correct irq.
         * Switch back to IRQ-based sync of command FIFO
@@ -231,9 +234,6 @@ static irqreturn_t tmiofb_irq(int irq, void *__info)
                par->use_polling = false;
        }
-        tmio_iowrite16(bbisc, par->lcr + LCR_BBISC);
-#ifdef CONFIG_FB_TMIO_ACCELL
        if (bbisc & 1)
                wake_up(&par->wait_acc);
 #endif
@@ -938,7 +938,9 @@ static void tmiofb_dump_regs(struct platform_device *dev)
 static int tmiofb_suspend(struct platform_device *dev, pm_message_t state)
 {
        struct fb_info *info = platform_get_drvdata(dev);
+#ifdef CONFIG_FB_TMIO_ACCELL
        struct tmiofb_par *par = info->par;
+#endif
        struct mfd_cell *cell = dev->dev.platform_data;
        int retval = 0;
@@ -950,12 +952,14 @@ static int tmiofb_suspend(struct platform_device *dev, pm_message_t state)
                info->fbops->fb_sync(info);
+#ifdef CONFIG_FB_TMIO_ACCELL
        /*
         * The fb should be usable even if interrupts are disabled (and they are
         * during suspend/resume). Switch temporary to forced polling.
         */
        printk(KERN_INFO "tmiofb: switching to polling\n");
        par->use_polling = true;
+#endif
        tmiofb_hw_stop(dev);
        if (cell->suspend)
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 0132eae06f55..73ac754ad801 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -2036,30 +2036,30 @@ static int viafb_vt1636_proc_write(struct file *file,
        return count;
 }
-static void viafb_init_proc(struct proc_dir_entry *viafb_entry)
+static void viafb_init_proc(struct proc_dir_entry **viafb_entry)
 {
        struct proc_dir_entry *entry;
-        viafb_entry = proc_mkdir("viafb", NULL);
+        *viafb_entry = proc_mkdir("viafb", NULL);
        if (viafb_entry) {
-                entry = create_proc_entry("dvp0", 0, viafb_entry);
+                entry = create_proc_entry("dvp0", 0, *viafb_entry);
                if (entry) {
                        entry->owner = THIS_MODULE;
                        entry->read_proc = viafb_dvp0_proc_read;
                        entry->write_proc = viafb_dvp0_proc_write;
                }
-                entry = create_proc_entry("dvp1", 0, viafb_entry);
+                entry = create_proc_entry("dvp1", 0, *viafb_entry);
                if (entry) {
                        entry->owner = THIS_MODULE;
                        entry->read_proc = viafb_dvp1_proc_read;
                        entry->write_proc = viafb_dvp1_proc_write;
                }
-                entry = create_proc_entry("dfph", 0, viafb_entry);
+                entry = create_proc_entry("dfph", 0, *viafb_entry);
                if (entry) {
                        entry->owner = THIS_MODULE;
                        entry->read_proc = viafb_dfph_proc_read;
                        entry->write_proc = viafb_dfph_proc_write;
                }
-                entry = create_proc_entry("dfpl", 0, viafb_entry);
+                entry = create_proc_entry("dfpl", 0, *viafb_entry);
                if (entry) {
                        entry->owner = THIS_MODULE;
                        entry->read_proc = viafb_dfpl_proc_read;
@@ -2068,7 +2068,7 @@ static void viafb_init_proc(struct proc_dir_entry *viafb_entry)
                if (VT1636_LVDS == viaparinfo->chip_info->lvds_chip_info.
                        lvds_chip_name || VT1636_LVDS ==
                    viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name) {
-                        entry = create_proc_entry("vt1636", 0, viafb_entry);
+                        entry = create_proc_entry("vt1636", 0, *viafb_entry);
                        if (entry) {
                                entry->owner = THIS_MODULE;
                                entry->read_proc = viafb_vt1636_proc_read;
@@ -2087,6 +2087,7 @@ static void viafb_remove_proc(struct proc_dir_entry *viafb_entry)
        remove_proc_entry("dfpl", viafb_entry);
        remove_proc_entry("vt1636", viafb_entry);
        remove_proc_entry("vt1625", viafb_entry);
+        remove_proc_entry("viafb", NULL);
 }
 static int __devinit via_pci_probe(void)
@@ -2348,7 +2349,7 @@ static int __devinit via_pci_probe(void)
                  viafbinfo->node, viafbinfo->fix.id, default_var.xres,
                  default_var.yres, default_var.bits_per_pixel);
-        viafb_init_proc(viaparinfo->proc_entry);
+        viafb_init_proc(&viaparinfo->proc_entry);
        viafb_init_dac(IGA2);
        return 0;
 }
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index a463b3dd837b..2493f05e9f61 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -668,7 +668,7 @@ static struct xenbus_device_id xenfb_ids[] = {
        { "" }
 };
-static struct xenbus_driver xenfb = {
+static struct xenbus_driver xenfb_driver = {
        .name = "vfb",
        .owner = THIS_MODULE,
        .ids = xenfb_ids,
@@ -687,12 +687,12 @@ static int __init xenfb_init(void)
        if (xen_initial_domain())
                return -ENODEV;
-        return xenbus_register_frontend(&xenfb);
+        return xenbus_register_frontend(&xenfb_driver);
 }
 static void __exit xenfb_cleanup(void)
 {
-        xenbus_unregister_driver(&xenfb);
+        xenbus_unregister_driver(&xenfb_driver);
 }
 module_init(xenfb_init);
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index a14d5b6e4c7c..90616822cd20 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -36,7 +36,7 @@ config W1_MASTER_DS2482
 config W1_MASTER_DS1WM
        tristate "Maxim DS1WM 1-wire busmaster"
-        depends on W1 && ARM
+        depends on W1 && ARM && HAVE_CLK
        help
          Say Y here to enable the DS1WM 1-wire driver, such as that
          in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 1295625c4825..c973889110c8 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -86,8 +86,8 @@ static struct platform_driver omap_hdq_driver = {
 static u8 omap_w1_read_byte(void *_hdq);
 static void omap_w1_write_byte(void *_hdq, u8 byte);
 static u8 omap_w1_reset_bus(void *_hdq);
-static void omap_w1_search_bus(void *_hdq, u8 search_type,
+static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev,
-        w1_slave_found_callback slave_found);
+                u8 search_type, w1_slave_found_callback slave_found);
 static struct w1_bus_master omap_w1_master = {
@@ -231,8 +231,8 @@ static u8 omap_w1_reset_bus(void *_hdq)
 }
 /* W1 search callback function */
-static void omap_w1_search_bus(void *_hdq, u8 search_type,
+static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev,
-        w1_slave_found_callback slave_found)
+                u8 search_type, w1_slave_found_callback slave_found)
 {
        u64 module_id, rn_le, cs, id;
@@ -249,7 +249,7 @@ static void omap_w1_search_bus(void *_hdq, u8 search_type,
        cs = w1_calc_crc8((u8 *)&rn_le, 7);
        id = (cs << 56) | module_id;
-        slave_found(_hdq, id);
+        slave_found(master_dev, id);
 }
 static int _omap_hdq_reset(struct hdq_data *hdq_data)
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index a0fb5eac407c..526c191e84ea 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -122,14 +122,7 @@ static struct timer_list balloon_timer;
 static void scrub_page(struct page *page)
 {
 #ifdef CONFIG_XEN_SCRUB_PAGES
-        if (PageHighMem(page)) {
+        clear_highpage(page);
-                void *v = kmap(page);
-                clear_page(v);
-                kunmap(v);
-        } else {
-                void *v = page_address(page);
-                clear_page(v);
-        }
 #endif
 }