5 files changed, 44 insertions, 14 deletions

diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 4c3785c9d4b8..9ecc3adcf6c1 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -1726,6 +1726,7 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wol
         case E1000_DEV_ID_82571EB_QUAD_COPPER:
         case E1000_DEV_ID_82571EB_QUAD_FIBER:
         case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
+        case E1000_DEV_ID_82571PT_QUAD_COPPER:
         case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
                 /* quad port adapters only support WoL on port A */
                 if (!adapter->quad_port_a) {
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index ba120f7fb0be..8604adbe351c 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -387,6 +387,7 @@ e1000_set_mac_type(struct e1000_hw *hw)
         case E1000_DEV_ID_82571EB_SERDES_DUAL:
         case E1000_DEV_ID_82571EB_SERDES_QUAD:
         case E1000_DEV_ID_82571EB_QUAD_COPPER:
+        case E1000_DEV_ID_82571PT_QUAD_COPPER:
         case E1000_DEV_ID_82571EB_QUAD_FIBER:
         case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
                 hw->mac_type = e1000_82571;
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index fe8714655c90..07f0ea73676e 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -475,6 +475,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
 #define E1000_DEV_ID_82571EB_FIBER       0x105F
 #define E1000_DEV_ID_82571EB_SERDES      0x1060
 #define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
+#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5
 #define E1000_DEV_ID_82571EB_QUAD_FIBER  0x10A5
 #define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE  0x10BC
 #define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4a225950fb43..e7c8951f47fa 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -108,6 +108,7 @@ static struct pci_device_id e1000_pci_tbl[] = {
         INTEL_E1000_ETHERNET_DEVICE(0x10BC),
         INTEL_E1000_ETHERNET_DEVICE(0x10C4),
         INTEL_E1000_ETHERNET_DEVICE(0x10C5),
+        INTEL_E1000_ETHERNET_DEVICE(0x10D5),
         INTEL_E1000_ETHERNET_DEVICE(0x10D9),
         INTEL_E1000_ETHERNET_DEVICE(0x10DA),
         /* required last entry */
@@ -1101,6 +1102,7 @@ e1000_probe(struct pci_dev *pdev,
         case E1000_DEV_ID_82571EB_QUAD_COPPER:
         case E1000_DEV_ID_82571EB_QUAD_FIBER:
         case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
+        case E1000_DEV_ID_82571PT_QUAD_COPPER:
                 /* if quad port adapter, disable WoL on all but port A */
                 if (global_quad_port_a != 0)
                         adapter->eeprom_wol = 0;
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 0792031a5cf9..162489b9f599 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -910,6 +910,20 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2)
         return le;
 }
 
+static void tx_init(struct sky2_port *sky2)
+{
+        struct sky2_tx_le *le;
+
+        sky2->tx_prod = sky2->tx_cons = 0;
+        sky2->tx_tcpsum = 0;
+        sky2->tx_last_mss = 0;
+
+        le = get_tx_le(sky2);
+        le->addr = 0;
+        le->opcode = OP_ADDR64 | HW_OWNER;
+        sky2->tx_addr64 = 0;
+}
+
 static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2,
                                             struct sky2_tx_le *le)
 {
@@ -1320,7 +1334,8 @@ static int sky2_up(struct net_device *dev)
                                 GFP_KERNEL);
         if (!sky2->tx_ring)
                 goto err_out;
-        sky2->tx_prod = sky2->tx_cons = 0;
+
+        tx_init(sky2);
 
         sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
                                            &sky2->rx_le_map);
@@ -2148,6 +2163,18 @@ static struct sk_buff *sky2_receive(struct net_device *dev,
         sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
         prefetch(sky2->rx_ring + sky2->rx_next);
 
+        if (length < ETH_ZLEN || length > sky2->rx_data_size)
+                goto len_error;
+
+        /* This chip has hardware problems that generates bogus status.
+         * So do only marginal checking and expect higher level protocols
+         * to handle crap frames.
+         */
+        if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
+            sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 &&
+            length != count)
+                goto okay;
+
         if (status & GMR_FS_ANY_ERR)
                 goto error;
 
@@ -2156,8 +2183,9 @@ static struct sk_buff *sky2_receive(struct net_device *dev,
 
         /* if length reported by DMA does not match PHY, packet was truncated */
         if (length != count)
-                goto len_mismatch;
+                goto len_error;
 
+okay:
         if (length < copybreak)
                 skb = receive_copy(sky2, re, length);
         else
@@ -2167,13 +2195,13 @@ resubmit:
 
         return skb;
 
-len_mismatch:
+len_error:
         /* Truncation of overlength packets
            causes PHY length to not match MAC length */
         ++sky2->net_stats.rx_length_errors;
         if (netif_msg_rx_err(sky2) && net_ratelimit())
-                pr_info(PFX "%s: rx length mismatch: length %d status %#x\n",
-                        dev->name, length, status);
+                pr_info(PFX "%s: rx length error: status %#x length %d\n",
+                        dev->name, status, length);
         goto resubmit;
 
 error:
@@ -3934,13 +3962,6 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
         sky2->hw = hw;
         sky2->msg_enable = netif_msg_init(debug, default_msg);
 
-        /* This chip has hardware problems that generates
-         * bogus PHY receive status so by default shut up the message.
-         */
-        if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
-            hw->chip_rev == CHIP_REV_YU_FE2_A0)
-                sky2->msg_enable &= ~NETIF_MSG_RX_ERR;
-
         /* Auto speed and flow control */
         sky2->autoneg = AUTONEG_ENABLE;
         sky2->flow_mode = FC_BOTH;
@@ -3964,8 +3985,12 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
                 dev->features |= NETIF_F_HIGHDMA;
 
 #ifdef SKY2_VLAN_TAG_USED
-        dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-        dev->vlan_rx_register = sky2_vlan_rx_register;
+        /* The workaround for FE+ status conflicts with VLAN tag detection. */
+        if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
+              sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) {
+                dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+                dev->vlan_rx_register = sky2_vlan_rx_register;
+        }
 #endif
 
         /* read the mac address */