18 files changed, 50 insertions, 82 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 6483ff696b5a..35fe7d1d4028 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -19,10 +19,13 @@ config HWMON
           This support can also be built as a module.  If so, the module
           will be called hwmon.
 
+config HWMON_VID
+        tristate
+        default n
+
 config SENSORS_ADM1021
         tristate "Analog Devices ADM1021 and compatibles"
         depends on HWMON && I2C
-        select I2C_SENSOR
         help
           If you say yes here you get support for Analog Devices ADM1021
           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
@@ -35,7 +38,7 @@ config SENSORS_ADM1021
 config SENSORS_ADM1025
         tristate "Analog Devices ADM1025 and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for Analog Devices ADM1025
           and Philips NE1619 sensor chips.
@@ -46,7 +49,7 @@ config SENSORS_ADM1025
 config SENSORS_ADM1026
         tristate "Analog Devices ADM1026 and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for Analog Devices ADM1026
           sensor chip.
@@ -57,7 +60,6 @@ config SENSORS_ADM1026
 config SENSORS_ADM1031
         tristate "Analog Devices ADM1031 and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for Analog Devices ADM1031
           and ADM1030 sensor chips.
@@ -68,7 +70,7 @@ config SENSORS_ADM1031
 config SENSORS_ADM9240
         tristate "Analog Devices ADM9240 and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for Analog Devices ADM9240,
           Dallas DS1780, National Semiconductor LM81 sensor chips.
@@ -79,7 +81,7 @@ config SENSORS_ADM9240
 config SENSORS_ASB100
         tristate "Asus ASB100 Bach"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for the ASB100 Bach sensor
           chip found on some Asus mainboards.
@@ -90,7 +92,7 @@ config SENSORS_ASB100
 config SENSORS_ATXP1
         tristate "Attansic ATXP1 VID controller"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for the Attansic ATXP1 VID
           controller.
@@ -104,7 +106,6 @@ config SENSORS_ATXP1
 config SENSORS_DS1621
         tristate "Dallas Semiconductor DS1621 and DS1625"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for Dallas Semiconductor
           DS1621 and DS1625 sensor chips.
@@ -115,7 +116,6 @@ config SENSORS_DS1621
 config SENSORS_FSCHER
         tristate "FSC Hermes"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for Fujitsu Siemens
           Computers Hermes sensor chips.
@@ -126,7 +126,6 @@ config SENSORS_FSCHER
 config SENSORS_FSCPOS
         tristate "FSC Poseidon"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for Fujitsu Siemens
           Computers Poseidon sensor chips.
@@ -137,7 +136,6 @@ config SENSORS_FSCPOS
 config SENSORS_GL518SM
         tristate "Genesys Logic GL518SM"
         depends on HWMON && I2C
-        select I2C_SENSOR
         help
           If you say yes here you get support for Genesys Logic GL518SM
           sensor chips.
@@ -148,7 +146,7 @@ config SENSORS_GL518SM
 config SENSORS_GL520SM
         tristate "Genesys Logic GL520SM"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for Genesys Logic GL520SM
           sensor chips.
@@ -159,8 +157,8 @@ config SENSORS_GL520SM
 config SENSORS_IT87
         tristate "ITE IT87xx and compatibles"
         depends on HWMON && I2C
-        select I2C_SENSOR
         select I2C_ISA
+        select HWMON_VID
         help
           If you say yes here you get support for ITE IT87xx sensor chips
           and clones: SiS960.
@@ -171,7 +169,6 @@ config SENSORS_IT87
 config SENSORS_LM63
         tristate "National Semiconductor LM63"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for the National Semiconductor
           LM63 remote diode digital temperature sensor with integrated fan
@@ -184,7 +181,6 @@ config SENSORS_LM63
 config SENSORS_LM75
         tristate "National Semiconductor LM75 and compatibles"
         depends on HWMON && I2C
-        select I2C_SENSOR
         help
           If you say yes here you get support for National Semiconductor LM75
           sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
@@ -200,7 +196,6 @@ config SENSORS_LM75
 config SENSORS_LM77
         tristate "National Semiconductor LM77"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for National Semiconductor LM77
           sensor chips.
@@ -211,7 +206,6 @@ config SENSORS_LM77
 config SENSORS_LM78
         tristate "National Semiconductor LM78 and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         select I2C_ISA
         help
           If you say yes here you get support for National Semiconductor LM78,
@@ -223,7 +217,6 @@ config SENSORS_LM78
 config SENSORS_LM80
         tristate "National Semiconductor LM80"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for National Semiconductor
           LM80 sensor chips.
@@ -234,7 +227,6 @@ config SENSORS_LM80
 config SENSORS_LM83
         tristate "National Semiconductor LM83"
         depends on HWMON && I2C
-        select I2C_SENSOR
         help
           If you say yes here you get support for National Semiconductor
           LM83 sensor chips.
@@ -245,7 +237,7 @@ config SENSORS_LM83
 config SENSORS_LM85
         tristate "National Semiconductor LM85 and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for National Semiconductor LM85
           sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
@@ -256,7 +248,7 @@ config SENSORS_LM85
 config SENSORS_LM87
         tristate "National Semiconductor LM87"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for National Semiconductor LM87
           sensor chips.
@@ -267,7 +259,6 @@ config SENSORS_LM87
 config SENSORS_LM90
         tristate "National Semiconductor LM90 and compatibles"
         depends on HWMON && I2C
-        select I2C_SENSOR
         help
           If you say yes here you get support for National Semiconductor LM90,
           LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
@@ -282,7 +273,6 @@ config SENSORS_LM90
 config SENSORS_LM92
         tristate "National Semiconductor LM92 and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for National Semiconductor LM92
           and Maxim MAX6635 sensor chips.
@@ -293,7 +283,6 @@ config SENSORS_LM92
 config SENSORS_MAX1619
         tristate "Maxim MAX1619 sensor chip"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for MAX1619 sensor chip.
 
@@ -303,8 +292,8 @@ config SENSORS_MAX1619
 config SENSORS_PC87360
         tristate "National Semiconductor PC87360 family"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         select I2C_ISA
+        select HWMON_VID
         help
           If you say yes here you get access to the hardware monitoring
           functions of the National Semiconductor PC8736x Super-I/O chips.
@@ -318,7 +307,6 @@ config SENSORS_PC87360
 config SENSORS_SIS5595
         tristate "Silicon Integrated Systems Corp. SiS5595"
         depends on HWMON && I2C && PCI && EXPERIMENTAL
-        select I2C_SENSOR
         select I2C_ISA
         help
           If you say yes here you get support for the integrated sensors in
@@ -330,7 +318,6 @@ config SENSORS_SIS5595
 config SENSORS_SMSC47M1
         tristate "SMSC LPC47M10x and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         select I2C_ISA
         help
           If you say yes here you get support for the integrated fan
@@ -343,7 +330,6 @@ config SENSORS_SMSC47M1
 config SENSORS_SMSC47B397
         tristate "SMSC LPC47B397-NC"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         select I2C_ISA
         help
           If you say yes here you get support for the SMSC LPC47B397-NC
@@ -355,7 +341,6 @@ config SENSORS_SMSC47B397
 config SENSORS_VIA686A
         tristate "VIA686A"
         depends on HWMON && I2C && PCI
-        select I2C_SENSOR
         select I2C_ISA
         help
           If you say yes here you get support for the integrated sensors in
@@ -367,8 +352,8 @@ config SENSORS_VIA686A
 config SENSORS_W83781D
         tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
         depends on HWMON && I2C
-        select I2C_SENSOR
         select I2C_ISA
+        select HWMON_VID
         help
           If you say yes here you get support for the Winbond W8378x series
           of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
@@ -380,7 +365,6 @@ config SENSORS_W83781D
 config SENSORS_W83792D
         tristate "Winbond W83792D"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for the Winbond W83792D chip.
 
@@ -390,7 +374,6 @@ config SENSORS_W83792D
 config SENSORS_W83L785TS
         tristate "Winbond W83L785TS-S"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for the Winbond W83L785TS-S
           sensor chip, which is used on the Asus A7N8X, among other
@@ -402,8 +385,8 @@ config SENSORS_W83L785TS
 config SENSORS_W83627HF
         tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         select I2C_ISA
+        select HWMON_VID
         help
           If you say yes here you get support for the Winbond W836X7 series
           of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
@@ -414,7 +397,6 @@ config SENSORS_W83627HF
 config SENSORS_W83627EHF
         tristate "Winbond W83627EHF"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         select I2C_ISA
         help
           If you say yes here you get preliminary support for the hardware
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 187b89d47f83..381f1bf04cc5 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_HWMON)             += hwmon.o
+obj-$(CONFIG_HWMON_VID)         += hwmon-vid.o
 
 # asb100, then w83781d go first, as they can override other drivers' addresses.
 obj-$(CONFIG_SENSORS_ASB100)    += asb100.o
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 229fd0de6f9e..526b7ff179eb 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -50,8 +50,8 @@
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 
 /*
@@ -473,7 +473,7 @@ static void adm1025_init_client(struct i2c_client *client)
         struct adm1025_data *data = i2c_get_clientdata(client);
         int i;
 
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
 
         /*
          * Set high limits
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index f32f819efcfc..625158110fd4 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -28,9 +28,9 @@
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
-#include <linux/hwmon-sysfs.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 
 /* Addresses to scan */
@@ -1552,7 +1552,7 @@ int adm1026_detect(struct i2c_adapter *adapter, int address,
                 goto exitfree;
 
         /* Set the VRM version */
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
 
         /* Initialize the ADM1026 chip */
         adm1026_init_client(new_client);
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 0a742cb88f4c..bc7faef162f7 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -45,8 +45,8 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 
 /* Addresses to scan */
@@ -657,7 +657,7 @@ static void adm9240_init_client(struct i2c_client *client)
         u8 conf = adm9240_read_value(client, ADM9240_REG_CONFIG);
         u8 mode = adm9240_read_value(client, ADM9240_REG_TEMP_CONF) & 3;
 
-        data->vrm = i2c_which_vrm(); /* need this to report vid as mV */
+        data->vrm = vid_which_vrm(); /* need this to report vid as mV */
 
         dev_info(&client->dev, "Using VRM: %d.%d\n", data->vrm / 10,
                         data->vrm % 10);
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 66b0dbd1af0e..8e34855a6274 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -39,8 +39,8 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/jiffies.h>
@@ -973,7 +973,7 @@ static void asb100_init_client(struct i2c_client *client)
 
         vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f;
         vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4;
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
         vid = vid_from_reg(vid, data->vrm);
 
         /* Start monitoring */
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index 5cf77e67a2ed..deb4d34c9539 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -23,8 +23,8 @@
 #include <linux/module.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 
 MODULE_LICENSE("GPL");
@@ -296,7 +296,7 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind)
         }
 
         /* Get VRM */
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
 
         if ((data->vrm != 90) && (data->vrm != 91)) {
                 dev_err(&new_client->dev, "Not supporting VRM %d.%d\n",
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index de6608a159c3..12fd757066fc 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -26,8 +26,8 @@
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 
 /* Type of the extra sensor */
@@ -617,7 +617,7 @@ static void gl520_init_client(struct i2c_client *client)
         conf = oldconf = gl520_read_value(client, GL520_REG_CONF);
 
         data->alarm_mask = 0xff;
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
 
         if (extra_sensor_type == 1)
                 conf &= ~0x10;
diff --git a/drivers/i2c/i2c-sensor-vid.c b/drivers/hwmon/hwmon-vid.c
index b8ef289fc80e..ce475c93f836 100644
--- a/drivers/i2c/i2c-sensor-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -1,6 +1,5 @@
 /*
-    i2c-sensor-vid.c -  Part of lm_sensors, Linux kernel modules for hardware
-                        monitoring
+    hwmon-vid.c - VID/VRM/VRD voltage conversions
 
     Copyright (c) 2004 Rudolf Marek <r.marek@sh.cvut.cz>
 
@@ -22,6 +21,7 @@
 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/hwmon-vid.h>
 
 struct vrm_model {
         u8 vendor;
@@ -63,7 +63,7 @@ static int find_vrm(u8 eff_family, u8 eff_model, u8 vendor)
         return 0;
 }
 
-int i2c_which_vrm(void)
+int vid_which_vrm(void)
 {
         struct cpuinfo_x86 *c = cpu_data;
         u32 eax;
@@ -81,23 +81,23 @@ int i2c_which_vrm(void)
         }
         vrm_ret = find_vrm(eff_family,eff_model,c->x86_vendor);
         if (vrm_ret == 0)
-                printk(KERN_INFO "i2c-sensor.o: Unknown VRM version of your"
+                printk(KERN_INFO "hwmon-vid: Unknown VRM version of your"
                 " x86 CPU\n");
         return vrm_ret;
 }
 
 /* and now for something completely different for Non-x86 world*/
 #else
-int i2c_which_vrm(void)
+int vid_which_vrm(void)
 {
-        printk(KERN_INFO "i2c-sensor.o: Unknown VRM version of your CPU\n");
+        printk(KERN_INFO "hwmon-vid: Unknown VRM version of your CPU\n");
         return 0;
 }
 #endif
 
-EXPORT_SYMBOL(i2c_which_vrm);
+EXPORT_SYMBOL(vid_which_vrm);
 
 MODULE_AUTHOR("Rudolf Marek <r.marek@sh.cvut.cz>");
 
-MODULE_DESCRIPTION("i2c-sensor driver");
+MODULE_DESCRIPTION("hwmon-vid driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 84877665b66e..53cc2b6d6385 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -37,9 +37,9 @@
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-isa.h>
-#include <linux/i2c-vid.h>
-#include <linux/hwmon-sysfs.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <asm/io.h>
 
@@ -919,7 +919,7 @@ int it87_detect(struct i2c_adapter *adapter, int address, int kind)
         }
 
         if (data->type == it8712) {
-                data->vrm = i2c_which_vrm();
+                data->vrm = vid_which_vrm();
                 device_create_file_vrm(new_client);
                 device_create_file_vid(new_client);
         }
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index aeb478815f72..ab214df9624b 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -28,8 +28,8 @@
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 
 /* Addresses to scan */
@@ -1147,7 +1147,7 @@ int lm85_detect(struct i2c_adapter *adapter, int address,
                 goto ERROR1;
 
         /* Set the VRM version */
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
 
         /* Initialize the LM85 chip */
         lm85_init_client(new_client);
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index d0d2464c1b73..dca996de4c33 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -57,8 +57,8 @@
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 
 /*
@@ -694,7 +694,7 @@ static void lm87_init_client(struct i2c_client *client)
         u8 config;
 
         data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE);
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
 
         config = lm87_read_value(client, LM87_REG_CONFIG);
         if (!(config & 0x01)) {
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index c66ae4f6e802..08fcb5aea764 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -39,8 +39,8 @@
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-isa.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <asm/io.h>
 
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 2d2fcfb706d7..02bd5c0239a2 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -43,8 +43,8 @@
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-isa.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <asm/io.h>
 #include "lm75.h"
@@ -1316,7 +1316,7 @@ static void w83627hf_init_client(struct i2c_client *client)
                 data->vrm = (data->vrm_ovt & 0x01) ? 90 : 82;
         } else {
                 /* Convert VID to voltage based on default VRM */
-                data->vrm = i2c_which_vrm();
+                data->vrm = vid_which_vrm();
         }
 
         tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 47607983acfd..4c43337ca780 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -39,8 +39,8 @@
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-isa.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <asm/io.h>
 #include "lm75.h"
@@ -1478,7 +1478,7 @@ w83781d_init_client(struct i2c_client *client)
                 w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0);
         }
 
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
 
         if ((type != w83781d) && (type != as99127f)) {
                 tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index d6d8c0f04e32..ba0c28015f6a 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -40,7 +40,6 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 71d68ad0e5ce..71c5a854ac5d 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -4,12 +4,8 @@
 
 obj-$(CONFIG_I2C)               += i2c-core.o
 obj-$(CONFIG_I2C_CHARDEV)       += i2c-dev.o
-obj-$(CONFIG_I2C_SENSOR)        += i2c-sensor.o
 obj-y                           += busses/ chips/ algos/
 
-i2c-sensor-objs := i2c-sensor-vid.o
-
-
 ifeq ($(CONFIG_I2C_DEBUG_CORE),y)
 EXTRA_CFLAGS += -DDEBUG
 endif
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 43f70dbfc03f..6bd44a44cd28 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -2,17 +2,12 @@
 # Miscellaneous I2C chip drivers configuration
 #
 
-config I2C_SENSOR
-        tristate
-        default n
-
 menu "Miscellaneous I2C Chip support"
         depends on I2C
 
 config SENSORS_DS1337
         tristate "Dallas Semiconductor DS1337 and DS1339 Real Time Clock"
         depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for Dallas Semiconductor
           DS1337 and DS1339 real-time clock chips.
@@ -23,7 +18,6 @@ config SENSORS_DS1337
 config SENSORS_DS1374
         tristate "Maxim/Dallas Semiconductor DS1374 Real Time Clock"
         depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for Dallas Semiconductor
           DS1374 real-time clock chips.
@@ -34,7 +28,6 @@ config SENSORS_DS1374
 config SENSORS_EEPROM
         tristate "EEPROM reader"
         depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get read-only access to the EEPROM data
           available on modern memory DIMMs and Sony Vaio laptops.  Such
@@ -46,7 +39,6 @@ config SENSORS_EEPROM
 config SENSORS_PCF8574
         tristate "Philips PCF8574 and PCF8574A"
         depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for Philips PCF8574 and 
           PCF8574A chips.
@@ -67,7 +59,6 @@ config SENSORS_PCA9539
 config SENSORS_PCF8591
         tristate "Philips PCF8591"
         depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for Philips PCF8591 chips.
 
@@ -77,7 +68,6 @@ config SENSORS_PCF8591
 config SENSORS_RTC8564
         tristate "Epson 8564 RTC chip"
         depends on I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for the Epson 8564 RTC chip.