158 files changed, 1151 insertions, 947 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ad1f59c1b3fc..b4a8d6030e48 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -132,7 +132,7 @@ config SATA_SIS
        depends on PCI
        select PATA_SIS
        help
-          This option enables support for SiS Serial ATA on 
+          This option enables support for SiS Serial ATA on
          SiS 964/965/966/180 and Parallel ATA on SiS 180.
          The PATA support for SiS 180 requires additionally to
          enable the PATA_SIS driver in the config.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index e00e1b913d28..7baeaffefe7a 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 #define DRV_NAME        "ahci"
-#define DRV_VERSION     "2.1"
+#define DRV_VERSION     "2.2"
 enum {
@@ -170,6 +170,7 @@ enum {
        AHCI_FLAG_IGN_IRQ_IF_ERR        = (1 << 25), /* ignore IRQ_IF_ERR */
        AHCI_FLAG_HONOR_PI              = (1 << 26), /* honor PORTS_IMPL */
        AHCI_FLAG_IGN_SERR_INTERNAL     = (1 << 27), /* ignore SERR_INTERNAL */
+        AHCI_FLAG_32BIT_ONLY            = (1 << 28), /* force 32bit */
        AHCI_FLAG_COMMON                = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
                                          ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
@@ -354,7 +355,8 @@ static const struct ata_port_info ahci_port_info[] = {
        /* board_ahci_sb600 */
        {
                .flags          = AHCI_FLAG_COMMON |
-                                  AHCI_FLAG_IGN_SERR_INTERNAL,
+                                  AHCI_FLAG_IGN_SERR_INTERNAL |
+                                  AHCI_FLAG_32BIT_ONLY,
                .pio_mask       = 0x1f, /* pio0-4 */
                .udma_mask      = 0x7f, /* udma0-6 ; FIXME */
                .port_ops       = &ahci_ops,
@@ -492,6 +494,13 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
        hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
        hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
+        /* some chips lie about 64bit support */
+        if ((cap & HOST_CAP_64) && (pi->flags & AHCI_FLAG_32BIT_ONLY)) {
+                dev_printk(KERN_INFO, &pdev->dev,
+                           "controller can't do 64bit DMA, forcing 32bit\n");
+                cap &= ~HOST_CAP_64;
+        }
        /* fixup zero port_map */
        if (!port_map) {
                port_map = (1 << ahci_nr_ports(hpriv->cap)) - 1;
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index c3d753296bc6..7565f022bd69 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 #define DRV_NAME "ata_generic"
-#define DRV_VERSION "0.2.11"
+#define DRV_VERSION "0.2.12"
 /*
 *      A generic parallel ATA driver using libata
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 13b6b1df2ac4..9c07b88631be 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -155,7 +155,6 @@ struct piix_host_priv {
 static int piix_init_one (struct pci_dev *pdev,
                                    const struct pci_device_id *ent);
 static void piix_pata_error_handler(struct ata_port *ap);
-static void piix_sata_error_handler(struct ata_port *ap);
 static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
 static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
 static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev);
@@ -364,7 +363,7 @@ static const struct ata_port_operations piix_sata_ops = {
        .freeze                 = ata_bmdma_freeze,
        .thaw                   = ata_bmdma_thaw,
-        .error_handler          = piix_sata_error_handler,
+        .error_handler          = ata_bmdma_error_handler,
        .post_internal_cmd      = ata_bmdma_post_internal_cmd,
        .irq_handler            = ata_interrupt,
@@ -579,6 +578,7 @@ static const struct ich_laptop ich_laptop[] = {
        { 0x27DF, 0x0005, 0x0280 },     /* ICH7 on Acer 5602WLMi */
        { 0x27DF, 0x1025, 0x0110 },     /* ICH7 on Acer 3682WLMi */
        { 0x27DF, 0x1043, 0x1267 },     /* ICH7 on Asus W5F */
+        { 0x24CA, 0x1025, 0x0061 },     /* ICH4 on ACER Aspire 2023WLMi */
        /* end marker */
        { 0, }
 };
@@ -641,12 +641,6 @@ static void piix_pata_error_handler(struct ata_port *ap)
                           ata_std_postreset);
 }
-static void piix_sata_error_handler(struct ata_port *ap)
-{
-        ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
-                           ata_std_postreset);
-}
 /**
 *      piix_set_piomode - Initialize host controller PATA PIO timings
 *      @ap: Port whose timings we are configuring
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index d3ea7f55283c..3ca9c610c110 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -59,7 +59,7 @@
 #include "libata.h"
-#define DRV_VERSION     "2.20"  /* must be exactly four chars */
+#define DRV_VERSION     "2.21"  /* must be exactly four chars */
 /* debounce timing parameters in msecs { interval, duration, timeout } */
@@ -977,7 +977,7 @@ static u64 ata_hpa_resize(struct ata_device *dev)
 {
        u64 sectors = dev->n_sectors;
        u64 hpa_sectors;
-        
        if (ata_id_has_lba48(dev->id))
                hpa_sectors = ata_read_native_max_address_ext(dev);
        else
@@ -1588,7 +1588,7 @@ unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
 *      Check if the current speed of the device requires IORDY. Used
 *      by various controllers for chip configuration.
 */
- 
 unsigned int ata_pio_need_iordy(const struct ata_device *adev)
 {
        /* Controller doesn't support  IORDY. Probably a pointless check
@@ -1611,7 +1611,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
 *      Compute the highest mode possible if we are not using iordy. Return
 *      -1 if no iordy mode is available.
 */
- 
 static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
 {
        /* If we have no drive specific rule, then PIO 2 is non IORDY */
@@ -2663,7 +2663,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
                t->active += (t->cycle - (t->active + t->recover)) / 2;
                t->recover = t->cycle - t->active;
        }
-        
        /* In a few cases quantisation may produce enough errors to
           leave t->cycle too low for the sum of active and recovery
           if so we must correct this */
@@ -2893,9 +2893,6 @@ int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
        if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX))
                ap->host->simplex_claimed = ap;
-        /* step5: chip specific finalisation */
-        if (ap->ops->post_set_mode)
-                ap->ops->post_set_mode(ap);
 out:
        if (rc)
                *r_failed_dev = dev;
@@ -3025,7 +3022,7 @@ int ata_wait_ready(struct ata_port *ap, unsigned long deadline)
                if (!(status & ATA_BUSY))
                        return 0;
-                if (status == 0xff)
+                if (!ata_port_online(ap) && status == 0xff)
                        return -ENODEV;
                if (time_after(now, deadline))
                        return -EBUSY;
@@ -3371,7 +3368,7 @@ int ata_std_prereset(struct ata_port *ap, unsigned long deadline)
         */
        if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_port_offline(ap)) {
                rc = ata_wait_ready(ap, deadline);
-                if (rc) {
+                if (rc && rc != -ENODEV) {
                        ata_port_printk(ap, KERN_WARNING, "device not ready "
                                        "(errno=%d), forcing hardreset\n", rc);
                        ehc->i.action |= ATA_EH_HARDRESET;
@@ -3771,6 +3768,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
        { "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA },
        { "_NEC DV5800A",       NULL,           ATA_HORKAGE_NODMA },
        { "SAMSUNG CD-ROM SN-124","N001",       ATA_HORKAGE_NODMA },
+        { "Seagate STT20000A", NULL,            ATA_HORKAGE_NODMA },
        /* Weird ATAPI devices */
        { "TORiSAN DVD-ROM DRD-N216", NULL,     ATA_HORKAGE_MAX_SEC_128 |
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 5309c312f517..d8070989a39f 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1009,7 +1009,7 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc)
        sense_buf[0] = 0x70;
        sense_buf[2] = qc->result_tf.feature >> 4;
-        /* some devices time out if garbage left in tf */ 
+        /* some devices time out if garbage left in tf */
        ata_tf_init(dev, &tf);
        memset(cdb, 0, ATAPI_CDB_LEN);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 242c43eef807..b3900cfbd880 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1050,14 +1050,15 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc)
 static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
 {
        u64 lba = 0;
-        u32 len = 0;
+        u32 len;
        VPRINTK("six-byte command\n");
+        lba |= ((u64)(cdb[1] & 0x1f)) << 16;
        lba |= ((u64)cdb[2]) << 8;
        lba |= ((u64)cdb[3]);
-        len |= ((u32)cdb[4]);
+        len = cdb[4];
        *plba = lba;
        *plen = len;
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 9861059dd673..03b6ddd2abd2 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -28,7 +28,7 @@
 #include <linux/ata.h>
 #define DRV_NAME        "pata_artop"
-#define DRV_VERSION     "0.4.2"
+#define DRV_VERSION     "0.4.3"
 /*
 *      The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
@@ -97,9 +97,9 @@ static int artop6260_pre_reset(struct ata_port *ap, unsigned long deadline)
 *      artop6260_cable_detect  -       identify cable type
 *      @ap: Port
 *
- *      Identify the cable type for the ARTOp interface in question
+ *      Identify the cable type for the ARTOP interface in question
 */
- 
 static int artop6260_cable_detect(struct ata_port *ap)
 {
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index ed00fa9d53be..31cbf8daa299 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -107,7 +107,7 @@ static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
                pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
        } else {
                /* Save the shared timings for channel, they will be loaded
-                   by qc_issue_prot. Reloading the setup time is expensive 
+                   by qc_issue_prot. Reloading the setup time is expensive
                   so we keep a merged one loaded */
                pci_read_config_byte(pdev, ARTIM23, &reg);
                reg &= 0x3F;
@@ -231,7 +231,7 @@ static void cmd640_hardware_init(struct pci_dev *pdev)
        pci_write_config_byte(pdev, CMDTIM, 0);
        /* 512 byte bursts (sector) */
        pci_write_config_byte(pdev, BRST, 0x40);
-        /* 
+        /*
         * A reporter a long time ago
         * Had problems with the data fifo
         * So don't run the risk
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 2a79b335cfcc..320a5b10aa98 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -31,7 +31,7 @@
 #include <linux/libata.h>
 #define DRV_NAME "pata_cmd64x"
-#define DRV_VERSION "0.2.2"
+#define DRV_VERSION "0.2.3"
 /*
 * CMD64x specific registers definition.
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 83bcc5b32597..1aabe15ad9d3 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -41,7 +41,7 @@
 #include <linux/libata.h>
 #define DRV_NAME        "pata_cs5520"
-#define DRV_VERSION     "0.6.4"
+#define DRV_VERSION     "0.6.5"
 struct pio_clocks
 {
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 1b67923d7a4e..848f0309bf03 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -35,7 +35,7 @@
 #include <linux/dmi.h>
 #define DRV_NAME        "pata_cs5530"
-#define DRV_VERSION     "0.7.2"
+#define DRV_VERSION     "0.7.3"
 static void __iomem *cs5530_port_base(struct ata_port *ap)
 {
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index f37d4cd812a1..aa3256fb9f7a 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -39,7 +39,7 @@
 #include <asm/msr.h>
 #define DRV_NAME        "cs5535"
-#define DRV_VERSION     "0.2.11"
+#define DRV_VERSION     "0.2.12"
 /*
 *      The Geode (Aka Athlon GX now) uses an internal MSR based
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 27b9f29c01e3..d41a7691dd8e 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -18,7 +18,7 @@
 #include <linux/libata.h>
 #define DRV_NAME "pata_cypress"
-#define DRV_VERSION "0.1.4"
+#define DRV_VERSION "0.1.5"
 /* here are the offset definitions for the registers */
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index c6c8a8bb06d0..0c9cb6090711 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -220,32 +220,6 @@ static int hpt36x_cable_detect(struct ata_port *ap)
        return ATA_CBL_PATA80;
 }
-static int hpt36x_pre_reset(struct ata_port *ap, unsigned long deadline)
-{
-        static const struct pci_bits hpt36x_enable_bits[] = {
-                { 0x50, 1, 0x04, 0x04 },
-                { 0x54, 1, 0x04, 0x04 }
-        };
-        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-        if (!pci_test_config_bits(pdev, &hpt36x_enable_bits[ap->port_no]))
-                return -ENOENT;
-        return ata_std_prereset(ap, deadline);
-}
-/**
- *      hpt36x_error_handler    -       reset the hpt36x bus
- *      @ap: ATA port to reset
- *
- *      Perform the reset handling for the 366/368
- */
-static void hpt36x_error_handler(struct ata_port *ap)
-{
-        ata_bmdma_drive_eh(ap, hpt36x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
 /**
 *      hpt366_set_piomode              -       PIO setup
 *      @ap: ATA interface
@@ -351,7 +325,7 @@ static struct ata_port_operations hpt366_port_ops = {
        .freeze         = ata_bmdma_freeze,
        .thaw           = ata_bmdma_thaw,
-        .error_handler  = hpt36x_error_handler,
+        .error_handler  = ata_bmdma_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
        .cable_detect   = hpt36x_cable_detect,
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 5a0a410654e2..6446735a46e0 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 #define DRV_NAME        "pata_hpt37x"
-#define DRV_VERSION     "0.6.5"
+#define DRV_VERSION     "0.6.6"
 struct hpt_clock {
        u8      xfer_speed;
@@ -931,15 +931,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                .udma_mask = 0x7f,
                .port_ops = &hpt372_port_ops
        };
-        /* HPT371, 372 and friends - UDMA100 at 50MHz clock */
-        static const struct ata_port_info info_hpt372_50 = {
-                .sht = &hpt37x_sht,
-                .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
-                .pio_mask = 0x1f,
-                .mwdma_mask = 0x07,
-                .udma_mask = 0x3f,
-                .port_ops = &hpt372_port_ops
-        };
        /* HPT374 - UDMA133 */
        static const struct ata_port_info info_hpt374 = {
                .sht = &hpt37x_sht,
@@ -961,7 +952,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
        u8 mcr1;
        u32 freq;
        int prefer_dpll = 1;
-        
        unsigned long iobase = pci_resource_start(dev, 4);
        const struct hpt_chip *chip_table;
@@ -1055,7 +1046,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
         */
        pci_write_config_byte(dev, 0x5b, 0x23);
-        
        /*
         * HighPoint does this for HPT372A.
         * NOTE: This register is only writeable via I/O space.
@@ -1088,7 +1079,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
         *      Turn the frequency check into a band and then find a timing
         *      table to match it.
         */
-         
        clock_slot = hpt37x_clock_slot(freq, chip_table->base);
        if (chip_table->clocks[clock_slot] == NULL || prefer_dpll) {
                /*
@@ -1098,17 +1089,21 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 *      use a 50MHz DPLL by choice
                 */
                unsigned int f_low, f_high;
-                int adjust;
+                int dpll, adjust;
-                
-                clock_slot = 2;
+                /* Compute DPLL */
+                dpll = 2;
                if (port->udma_mask & 0xE0)
-                        clock_slot = 3;
+                        dpll = 3;
-                
-                f_low = (MHz[clock_slot] * chip_table->base) / 192;
+                f_low = (MHz[clock_slot] * 48) / MHz[dpll];
                f_high = f_low + 2;
+                if (clock_slot > 1)
+                        f_high += 2;
                /* Select the DPLL clock. */
                pci_write_config_byte(dev, 0x5b, 0x21);
+                pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
                for(adjust = 0; adjust < 8; adjust++) {
                        if (hpt37x_calibrate_dpll(dev))
@@ -1124,12 +1119,12 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                        printk(KERN_WARNING "hpt37x: DPLL did not stabilize.\n");
                        return -ENODEV;
                }
-                if (clock_slot == 3)
+                if (dpll == 3)
                        private_data = (void *)hpt37x_timings_66;
                else
                        private_data = (void *)hpt37x_timings_50;
-                printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[clock_slot]);
+                printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[dpll]);
        } else {
                private_data = (void *)chip_table->clocks[clock_slot];
                /*
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index f25154aed75d..e947433cb37d 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -521,8 +521,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                        /* 371N if rev > 1 */
                        break;
                case PCI_DEVICE_ID_TTI_HPT372:
-                        /* 372N if rev >= 1*/
+                        /* 372N if rev >= 2*/
-                        if (class_rev == 0)
+                        if (class_rev < 2)
                                return -ENODEV;
                        break;
                case PCI_DEVICE_ID_TTI_HPT302:
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index bbabe7902fbb..8ce5e23a5f75 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -23,7 +23,7 @@
 #include <linux/libata.h>
 #define DRV_NAME        "pata_hpt3x3"
-#define DRV_VERSION     "0.4.2"
+#define DRV_VERSION     "0.4.3"
 /**
 *      hpt3x3_set_piomode              -       PIO setup
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index d042efdfbac4..1f647b648204 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -17,7 +17,7 @@
 #include <linux/libata.h>
 #define DRV_NAME "pata_isapnp"
-#define DRV_VERSION "0.2.0"
+#define DRV_VERSION "0.2.1"
 static struct scsi_host_template isapnp_sht = {
        .module                 = THIS_MODULE,
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index a769952646e1..95b0bb61788b 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -19,7 +19,7 @@
 #include <linux/ata.h>
 #define DRV_NAME        "pata_it8213"
-#define DRV_VERSION     "0.0.2"
+#define DRV_VERSION     "0.0.3"
 /**
 *      it8213_pre_reset        -       check for 40/80 pin
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index ff9a6fd36657..b3456d7a592c 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -1,5 +1,5 @@
 /*
- * ata-it821x.c         - IT821x PATA for new ATA layer
+ * pata_it821x.c        - IT821x PATA for new ATA layer
 *                        (C) 2005 Red Hat Inc
 *                        Alan Cox <alan@redhat.com>
 *
@@ -65,7 +65,6 @@
 *
 *  TODO
 *      -       ATAPI and other speed filtering
- *      -       Command filter in smart mode
 *      -       RAID configuration ioctls
 */
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index b994351fbcd0..8d2bc1e9e871 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -23,7 +23,7 @@
 #include <scsi/scsi_host.h>
 #define DRV_NAME        "pata_ixp4xx_cf"
-#define DRV_VERSION     "0.1.2"
+#define DRV_VERSION     "0.1.3"
 static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
 {
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 8d799e87f752..2af7ff8256ca 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -19,7 +19,7 @@
 #include <linux/ata.h>
 #define DRV_NAME        "pata_jmicron"
-#define DRV_VERSION     "0.1.4"
+#define DRV_VERSION     "0.1.5"
 typedef enum {
        PORT_PATA0 = 0,
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 707099291e01..edffc25d2d3f 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -64,7 +64,7 @@
 #include <linux/platform_device.h>
 #define DRV_NAME "pata_legacy"
-#define DRV_VERSION "0.5.4"
+#define DRV_VERSION "0.5.5"
 #define NR_HOST 6
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 1f6384895a4f..cbb7866940d6 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -22,7 +22,7 @@
 #include <linux/pata_platform.h>
 #define DRV_NAME "pata_platform"
-#define DRV_VERSION "0.1.2"
+#define DRV_VERSION "1.0"
 static int pio_mask = 1;
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index fb8c9e14b8d4..1998c19e8743 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -26,7 +26,7 @@
 #include <linux/platform_device.h>
 #define DRV_NAME "pata_qdi"
-#define DRV_VERSION "0.3.0"
+#define DRV_VERSION "0.3.1"
 #define NR_HOST 4       /* Two 6580s */
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 2bfd7ef42af5..a3488b41ad26 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -21,7 +21,7 @@
 #include <linux/libata.h>
 #define DRV_NAME        "pata_rz1000"
-#define DRV_VERSION     "0.2.3"
+#define DRV_VERSION     "0.2.4"
 /**
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 225013ecf4b6..1233063ab9a8 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -40,7 +40,7 @@
 #include <linux/libata.h>
 #define DRV_NAME        "sc1200"
-#define DRV_VERSION     "0.2.4"
+#define DRV_VERSION     "0.2.5"
 #define SC1200_REV_A    0x00
 #define SC1200_REV_B1   0x01
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 844e53b280c7..61502bc7bf1d 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -43,7 +43,7 @@
 #include <linux/libata.h>
 #define DRV_NAME                "pata_scc"
-#define DRV_VERSION             "0.1"
+#define DRV_VERSION             "0.2"
 #define PCI_DEVICE_ID_TOSHIBA_SCC_ATA           0x01b4
@@ -489,23 +489,26 @@ static unsigned int scc_devchk (struct ata_port *ap,
 *      Note: Original code is ata_bus_post_reset().
 */
-static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask)
+static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask,
+                              unsigned long deadline)
 {
        struct ata_ioports *ioaddr = &ap->ioaddr;
        unsigned int dev0 = devmask & (1 << 0);
        unsigned int dev1 = devmask & (1 << 1);
-        unsigned long timeout;
+        int rc;
        /* if device 0 was found in ata_devchk, wait for its
         * BSY bit to clear
         */
-        if (dev0)
+        if (dev0) {
-                ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+                rc = ata_wait_ready(ap, deadline);
+                if (rc && rc != -ENODEV)
+                        return rc;
+        }
        /* if device 1 was found in ata_devchk, wait for
         * register access, then wait for BSY to clear
         */
-        timeout = jiffies + ATA_TMOUT_BOOT;
        while (dev1) {
                u8 nsect, lbal;
@@ -514,14 +517,15 @@ static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask)
                lbal = in_be32(ioaddr->lbal_addr);
                if ((nsect == 1) && (lbal == 1))
                        break;
-                if (time_after(jiffies, timeout)) {
+                if (time_after(jiffies, deadline))
-                        dev1 = 0;
+                        return -EBUSY;
-                        break;
-                }
                msleep(50);     /* give drive a breather */
        }
-        if (dev1)
+        if (dev1) {
-                ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+                rc = ata_wait_ready(ap, deadline);
+                if (rc && rc != -ENODEV)
+                        return rc;
+        }
        /* is all this really necessary? */
        ap->ops->dev_select(ap, 0);
@@ -529,6 +533,8 @@ static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask)
                ap->ops->dev_select(ap, 1);
        if (dev0)
                ap->ops->dev_select(ap, 0);
+        return 0;
 }
 /**
@@ -537,8 +543,8 @@ static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask)
 *      Note: Original code is ata_bus_softreset().
 */
-static unsigned int scc_bus_softreset (struct ata_port *ap,
+static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
-                                       unsigned int devmask)
+                                      unsigned long deadline)
 {
        struct ata_ioports *ioaddr = &ap->ioaddr;
@@ -570,7 +576,7 @@ static unsigned int scc_bus_softreset (struct ata_port *ap,
        if (scc_check_status(ap) == 0xFF)
                return 0;
-        scc_bus_post_reset(ap, devmask);
+        scc_bus_post_reset(ap, devmask, deadline);
        return 0;
 }
@@ -579,11 +585,13 @@ static unsigned int scc_bus_softreset (struct ata_port *ap,
 *      scc_std_softreset - reset host port via ATA SRST
 *      @ap: port to reset
 *      @classes: resulting classes of attached devices
+ *      @deadline: deadline jiffies for the operation
 *
 *      Note: Original code is ata_std_softreset().
 */
-static int scc_std_softreset (struct ata_port *ap, unsigned int *classes)
+static int scc_std_softreset (struct ata_port *ap, unsigned int *classes,
+                              unsigned long deadline)
 {
        unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
        unsigned int devmask = 0, err_mask;
@@ -607,7 +615,7 @@ static int scc_std_softreset (struct ata_port *ap, unsigned int *classes)
        /* issue bus reset */
        DPRINTK("about to softreset, devmask=%x\n", devmask);
-        err_mask = scc_bus_softreset(ap, devmask);
+        err_mask = scc_bus_softreset(ap, devmask, deadline);
        if (err_mask) {
                ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n",
                                err_mask);
@@ -676,10 +684,11 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc)
                if (reg & INTSTS_BMSINT) {
                        unsigned int classes;
+                        unsigned long deadline = jiffies + ATA_TMOUT_BOOT;
                        printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
                        out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
                        /* TBD: SW reset */
-                        scc_std_softreset(ap, &classes);
+                        scc_std_softreset(ap, &classes, deadline);
                        continue;
                }
@@ -862,9 +871,10 @@ static void scc_bmdma_freeze (struct ata_port *ap)
 /**
 *      scc_pata_prereset - prepare for reset
 *      @ap: ATA port to be reset
+ *      @deadline: deadline jiffies for the operation
 */
-static int scc_pata_prereset (struct ata_port *ap, unsigned long deadline)
+static int scc_pata_prereset(struct ata_port *ap, unsigned long deadline)
 {
        ap->cbl = ATA_CBL_PATA80;
        return ata_std_prereset(ap, deadline);
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index dee6e211949d..1e8f421963c7 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -41,7 +41,7 @@
 #include <linux/libata.h>
 #define DRV_NAME "pata_serverworks"
-#define DRV_VERSION "0.4.0"
+#define DRV_VERSION "0.4.1"
 #define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
 #define SVWKS_CSB6_REVISION     0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index f2231267e011..ec3ae9375015 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -73,14 +73,14 @@ static int sis_short_ata40(struct pci_dev *dev)
 }
 /**
- *      sis_port_base           -       return PCI configuration base for dev
+ *      sis_old_port_base               -       return PCI configuration base for dev
 *      @adev: device
 *
 *      Returns the base of the PCI configuration registers for this port
 *      number.
 */
-static int sis_port_base(struct ata_device *adev)
+static int sis_old_port_base(struct ata_device *adev)
 {
        return  0x40 + (4 * adev->ap->port_no) +  (2 * adev->devno);
 }
@@ -211,7 +211,7 @@ static void sis_set_fifo(struct ata_port *ap, struct ata_device *adev)
 static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev)
 {
        struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
-        int port = sis_port_base(adev);
+        int port = sis_old_port_base(adev);
        u8 t1, t2;
        int speed = adev->pio_mode - XFER_PIO_0;
@@ -248,7 +248,7 @@ static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev)
 static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev)
 {
        struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
-        int port = sis_port_base(adev);
+        int port = sis_old_port_base(adev);
        int speed = adev->pio_mode - XFER_PIO_0;
        const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };
@@ -328,7 +328,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 {
        struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
        int speed = adev->dma_mode - XFER_MW_DMA_0;
-        int drive_pci = sis_port_base(adev);
+        int drive_pci = sis_old_port_base(adev);
        u16 timing;
        const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 };
@@ -367,7 +367,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 {
        struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
        int speed = adev->dma_mode - XFER_MW_DMA_0;
-        int drive_pci = sis_port_base(adev);
+        int drive_pci = sis_old_port_base(adev);
        u16 timing;
        const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 };
@@ -378,12 +378,12 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
        if (adev->dma_mode < XFER_UDMA_0) {
                /* bits 3-0 hold recovery timing bits 8-10 active timing and
                   the higer bits are dependant on the device, bit 15 udma */
-                timing &= ~ 0x870F;
+                timing &= ~0x870F;
                timing |= mwdma_bits[speed];
        } else {
                /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */
                speed = adev->dma_mode - XFER_UDMA_0;
-                timing &= ~0x6000;
+                timing &= ~0xF000;
                timing |= udma_bits[speed];
        }
        pci_write_config_word(pdev, drive_pci, timing);
@@ -405,22 +405,22 @@ static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 {
        struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
        int speed = adev->dma_mode - XFER_MW_DMA_0;
-        int drive_pci = sis_port_base(adev);
+        int drive_pci = sis_old_port_base(adev);
-        u16 timing;
+        u8 timing;
-        const u16 udma_bits[]  = { 0x8B00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100};
+        const u8 udma_bits[]  = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81};
-        pci_read_config_word(pdev, drive_pci, &timing);
+        pci_read_config_byte(pdev, drive_pci + 1, &timing);
        if (adev->dma_mode < XFER_UDMA_0) {
                /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */
        } else {
-                /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */
+                /* Bit 7 is UDMA on/off, bit 0-3 are cycle time */
                speed = adev->dma_mode - XFER_UDMA_0;
-                timing &= ~0x0F00;
+                timing &= ~0x8F;
                timing |= udma_bits[speed];
        }
-        pci_write_config_word(pdev, drive_pci, timing);
+        pci_write_config_byte(pdev, drive_pci + 1, timing);
 }
 /**
@@ -440,22 +440,22 @@ static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *a
 {
        struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
        int speed = adev->dma_mode - XFER_MW_DMA_0;
-        int drive_pci = sis_port_base(adev);
+        int drive_pci = sis_old_port_base(adev);
-        u16 timing;
+        u8 timing;
+        /* Low 4 bits are timing */
-        static const u16 udma_bits[]  = { 0x8F00, 0x8A00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100};
+        static const u8 udma_bits[]  = { 0x8F, 0x8A, 0x87, 0x85, 0x83, 0x82, 0x81};
-        pci_read_config_word(pdev, drive_pci, &timing);
+        pci_read_config_byte(pdev, drive_pci + 1, &timing);
        if (adev->dma_mode < XFER_UDMA_0) {
                /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */
        } else {
-                /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */
+                /* Bit 7 is UDMA on/off, bit 0-3 are cycle time */
                speed = adev->dma_mode - XFER_UDMA_0;
-                timing &= ~0x0F00;
+                timing &= ~0x8F;
                timing |= udma_bits[speed];
        }
-        pci_write_config_word(pdev, drive_pci, timing);
+        pci_write_config_byte(pdev, drive_pci + 1, timing);
 }
 /**
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index f48491ad5f3a..e5aaec43694d 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 #define DRV_NAME "pata_sl82c105"
-#define DRV_VERSION "0.3.0"
+#define DRV_VERSION "0.3.1"
 enum {
        /*
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index e4c71f76bd55..a8462f1e890b 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -60,6 +60,7 @@
 #include <linux/delay.h>
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
+#include <linux/dmi.h>
 #define DRV_NAME "pata_via"
 #define DRV_VERSION "0.3.1"
@@ -122,6 +123,31 @@ static const struct via_isa_bridge {
        { NULL }
 };
+/*
+ *      Cable special cases
+ */
+static struct dmi_system_id cable_dmi_table[] = {
+        {
+                .ident = "Acer Ferrari 3400",
+                .matches = {
+                        DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."),
+                        DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"),
+                },
+        },
+        { }
+};
+static int via_cable_override(struct pci_dev *pdev)
+{
+        /* Systems by DMI */
+        if (dmi_check_system(cable_dmi_table))
+                return 1;
+        return 0;
+}
 /**
 *      via_cable_detect        -       cable detection
 *      @ap: ATA port
@@ -139,6 +165,9 @@ static int via_cable_detect(struct ata_port *ap) {
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
        u32 ata66;
+        if (via_cable_override(pdev))
+                return ATA_CBL_PATA40_SHORT;
        /* Early chips are 40 wire */
        if ((config->flags & VIA_UDMA) < VIA_UDMA_66)
                return ATA_CBL_PATA40;
@@ -592,10 +621,11 @@ static int via_reinit_one(struct pci_dev *pdev)
 #endif
 static const struct pci_device_id via[] = {
-        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), },
+        { PCI_VDEVICE(VIA, 0x0571), },
-        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), },
+        { PCI_VDEVICE(VIA, 0x0581), },
-        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), },
+        { PCI_VDEVICE(VIA, 0x1571), },
-        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), },
+        { PCI_VDEVICE(VIA, 0x3164), },
+        { PCI_VDEVICE(VIA, 0x5324), },
        { },
 };
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index cc4ad271afb5..83abfeca4057 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -16,7 +16,7 @@
 #include <linux/platform_device.h>
 #define DRV_NAME "pata_winbond"
-#define DRV_VERSION "0.0.2"
+#define DRV_VERSION "0.0.3"
 #define NR_HOST 4       /* Two winbond controllers, two channels each */
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 52b69530ab29..f12c2b6ac08e 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -44,7 +44,7 @@
 #include <linux/libata.h>
 #define DRV_NAME        "pdc_adma"
-#define DRV_VERSION     "0.05"
+#define DRV_VERSION     "0.06"
 /* macro to calculate base address for ATA regs */
 #define ADMA_ATA_REGS(base,port_no)     ((base) + ((port_no) * 0x40))
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index bda5e7747c21..2d80c9d95e95 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -28,7 +28,7 @@
 #include <scsi/scsi_device.h>
 #define DRV_NAME        "sata_inic162x"
-#define DRV_VERSION     "0.1"
+#define DRV_VERSION     "0.2"
 enum {
        MMIO_BAR                = 5,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index cb9b9ac12b4c..c957e6e54ba1 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -21,6 +21,50 @@
 *
 */
+/*
+  sata_mv TODO list:
+  1) Needs a full errata audit for all chipsets.  I implemented most
+  of the errata workarounds found in the Marvell vendor driver, but
+  I distinctly remember a couple workarounds (one related to PCI-X)
+  are still needed.
+  2) Convert to LibATA new EH.  Required for hotplug, NCQ, and sane
+  probing/error handling in general.  MUST HAVE.
+  3) Add hotplug support (easy, once new-EH support appears)
+  4) Add NCQ support (easy to intermediate, once new-EH support appears)
+  5) Investigate problems with PCI Message Signalled Interrupts (MSI).
+  6) Add port multiplier support (intermediate)
+  7) Test and verify 3.0 Gbps support
+  8) Develop a low-power-consumption strategy, and implement it.
+  9) [Experiment, low priority] See if ATAPI can be supported using
+  "unknown FIS" or "vendor-specific FIS" support, or something creative
+  like that.
+  10) [Experiment, low priority] Investigate interrupt coalescing.
+  Quite often, especially with PCI Message Signalled Interrupts (MSI),
+  the overhead reduced by interrupt mitigation is quite often not
+  worth the latency cost.
+  11) [Experiment, Marvell value added] Is it possible to use target
+  mode to cross-connect two Linux boxes with Marvell cards?  If so,
+  creating LibATA target mode support would be very interesting.
+  Target mode, for those without docs, is the ability to directly
+  connect two SATA controllers.
+  13) Verify that 7042 is fully supported.  I only have a 6042.
+*/
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -35,7 +79,7 @@
 #include <linux/libata.h>
 #define DRV_NAME        "sata_mv"
-#define DRV_VERSION     "0.8"
+#define DRV_VERSION     "0.81"
 enum {
        /* BAR's are enumerated in terms of pci_resource_start() terms */
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 1a49c777fa6a..adfa693db53d 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -49,7 +49,7 @@
 #include <linux/libata.h>
 #define DRV_NAME                        "sata_nv"
-#define DRV_VERSION                     "3.3"
+#define DRV_VERSION                     "3.4"
 #define NV_ADMA_DMA_BOUNDARY            0xffffffffUL
@@ -802,7 +802,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
                        u16 status;
                        u32 gen_ctl;
                        u32 notifier, notifier_error;
-                        
                        /* if ADMA is disabled, use standard ata interrupt handler */
                        if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
                                u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
@@ -963,7 +963,7 @@ static void nv_adma_irq_clear(struct ata_port *ap)
        /* clear ADMA status */
        writew(0xffff, mmio + NV_ADMA_STAT);
-        
        /* clear notifiers - note both ports need to be written with
           something even though we are only clearing on one */
        if (ap->port_no == 0) {
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 3a7d9b5332af..2b924a69b365 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -297,7 +297,7 @@ static const struct ata_port_info pdc_port_info[] = {
        /* board_2057x_pata */
        {
-                .flags          = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
+                .flags          = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS |
                                  PDC_FLAG_GEN_II,
                .pio_mask       = 0x1f, /* pio0-4 */
                .mwdma_mask     = 0x07, /* mwdma0-2 */
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index f5a05de0093d..6688ccb66320 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -39,7 +39,7 @@
 #include <linux/libata.h>
 #define DRV_NAME        "sata_qstor"
-#define DRV_VERSION     "0.07"
+#define DRV_VERSION     "0.08"
 enum {
        QS_MMIO_BAR             = 4,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index e8483aadd11b..a3b339bcf3cf 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -305,7 +305,7 @@ static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed)
        u32 tmp, dev_mode[2];
        unsigned int i;
        int rc;
-        
        rc = ata_do_set_mode(ap, r_failed);
        if (rc)
                return rc;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 0cb6618935b1..0ddfae9911cd 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -30,7 +30,7 @@
 #include <linux/libata.h>
 #define DRV_NAME        "sata_sil24"
-#define DRV_VERSION     "0.8"
+#define DRV_VERSION     "0.9"
 /*
 * Port request block (PRB) 32 bytes
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index ee66c5fa7ac8..221099d1d08f 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -43,7 +43,7 @@
 #include "sis.h"
 #define DRV_NAME        "sata_sis"
-#define DRV_VERSION     "0.7"
+#define DRV_VERSION     "0.8"
 enum {
        sis_180                 = 0,
@@ -255,7 +255,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
        static int printed_version;
        struct ata_port_info pi = sis_port_info;
-        const struct ata_port_info *ppi[] = { &pi, NULL };
+        const struct ata_port_info *ppi[] = { &pi, &pi };
        struct ata_host *host;
        u32 genctl, val;
        u8 pmr;
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 17246734fe76..bcb2cd8b063d 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -53,7 +53,7 @@
 #endif /* CONFIG_PPC_OF */
 #define DRV_NAME        "sata_svw"
-#define DRV_VERSION     "2.1"
+#define DRV_VERSION     "2.2"
 enum {
        /* ap->flags bits */
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 3a4f44559d0a..2d14f3d56d92 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -44,7 +44,7 @@
 #include "sata_promise.h"
 #define DRV_NAME        "sata_sx4"
-#define DRV_VERSION     "0.10"
+#define DRV_VERSION     "0.11"
 enum {
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 006f5e352658..6815de7cca79 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -36,7 +36,7 @@
 #include <linux/libata.h>
 #define DRV_NAME        "sata_uli"
-#define DRV_VERSION     "1.1"
+#define DRV_VERSION     "1.2"
 enum {
        uli_5289                = 0,
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index ac4f43c4993f..e8b90e7b42dd 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 #define DRV_NAME        "sata_via"
-#define DRV_VERSION     "2.1"
+#define DRV_VERSION     "2.2"
 enum board_ids_enum {
        vt6420,
@@ -85,6 +85,9 @@ static const struct pci_device_id svia_pci_tbl[] = {
        { PCI_VDEVICE(VIA, 0x0591), vt6420 },
        { PCI_VDEVICE(VIA, 0x3149), vt6420 },
        { PCI_VDEVICE(VIA, 0x3249), vt6421 },
+        { PCI_VDEVICE(VIA, 0x5287), vt6420 },
+        { PCI_VDEVICE(VIA, 0x5372), vt6420 },
+        { PCI_VDEVICE(VIA, 0x7372), vt6420 },
        { }     /* terminate list */
 };
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 80126f835d32..81330175fc89 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -47,7 +47,7 @@
 #include <linux/libata.h>
 #define DRV_NAME        "sata_vsc"
-#define DRV_VERSION     "2.1"
+#define DRV_VERSION     "2.2"
 enum {
        VSC_MMIO_BAR                    = 0,
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index 057efbc55d38..3800bc0cb2ef 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -47,7 +47,8 @@ static char const rcsid[] =
 #include <linux/bitops.h>
 #include <linux/wait.h>
 #include <linux/jiffies.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/atomic.h>
@@ -2435,7 +2436,7 @@ idt77252_open(struct atm_vcc *vcc)
        set_bit(ATM_VF_ADDR, &vcc->flags);
-        down(&card->mutex);
+        mutex_lock(&card->mutex);
        OPRINTK("%s: opening vpi.vci: %d.%d\n", card->name, vpi, vci);
@@ -2446,7 +2447,7 @@ idt77252_open(struct atm_vcc *vcc)
                break;
        default:
                printk("%s: Unsupported AAL: %d\n", card->name, vcc->qos.aal);
-                up(&card->mutex);
+                mutex_unlock(&card->mutex);
                return -EPROTONOSUPPORT;
        }
@@ -2455,7 +2456,7 @@ idt77252_open(struct atm_vcc *vcc)
                card->vcs[index] = kzalloc(sizeof(struct vc_map), GFP_KERNEL);
                if (!card->vcs[index]) {
                        printk("%s: can't alloc vc in open()\n", card->name);
-                        up(&card->mutex);
+                        mutex_unlock(&card->mutex);
                        return -ENOMEM;
                }
                card->vcs[index]->card = card;
@@ -2484,14 +2485,14 @@ idt77252_open(struct atm_vcc *vcc)
        if (inuse) {
                printk("%s: %s vci already in use.\n", card->name,
                       inuse == 1 ? "tx" : inuse == 2 ? "rx" : "tx and rx");
-                up(&card->mutex);
+                mutex_unlock(&card->mutex);
                return -EADDRINUSE;
        }
        if (vcc->qos.txtp.traffic_class != ATM_NONE) {
                error = idt77252_init_tx(card, vc, vcc, &vcc->qos);
                if (error) {
-                        up(&card->mutex);
+                        mutex_unlock(&card->mutex);
                        return error;
                }
        }
@@ -2499,14 +2500,14 @@ idt77252_open(struct atm_vcc *vcc)
        if (vcc->qos.rxtp.traffic_class != ATM_NONE) {
                error = idt77252_init_rx(card, vc, vcc, &vcc->qos);
                if (error) {
-                        up(&card->mutex);
+                        mutex_unlock(&card->mutex);
                        return error;
                }
        }
        set_bit(ATM_VF_READY, &vcc->flags);
-        up(&card->mutex);
+        mutex_unlock(&card->mutex);
        return 0;
 }
@@ -2520,7 +2521,7 @@ idt77252_close(struct atm_vcc *vcc)
        unsigned long addr;
        unsigned long timeout;
-        down(&card->mutex);
+        mutex_lock(&card->mutex);
        IPRINTK("%s: idt77252_close: vc = %d (%d.%d)\n",
                card->name, vc->index, vcc->vpi, vcc->vci);
@@ -2591,7 +2592,7 @@ done:
                free_scq(card, vc->scq);
        }
-        up(&card->mutex);
+        mutex_unlock(&card->mutex);
 }
 static int
@@ -2602,7 +2603,7 @@ idt77252_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flags)
        struct vc_map *vc = vcc->dev_data;
        int error = 0;
-        down(&card->mutex);
+        mutex_lock(&card->mutex);
        if (qos->txtp.traffic_class != ATM_NONE) {
                if (!test_bit(VCF_TX, &vc->flags)) {
@@ -2648,7 +2649,7 @@ idt77252_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flags)
        set_bit(ATM_VF_HASQOS, &vcc->flags);
 out:
-        up(&card->mutex);
+        mutex_unlock(&card->mutex);
        return error;
 }
@@ -3709,7 +3710,7 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id)
        membase = pci_resource_start(pcidev, 1);
        srambase = pci_resource_start(pcidev, 2);
-        init_MUTEX(&card->mutex);
+        mutex_init(&card->mutex);
        spin_lock_init(&card->cmd_lock);
        spin_lock_init(&card->tst_lock);
diff --git a/drivers/atm/idt77252.h b/drivers/atm/idt77252.h
index 544b39738291..6f2b4a5875fb 100644
--- a/drivers/atm/idt77252.h
+++ b/drivers/atm/idt77252.h
@@ -37,7 +37,7 @@
 #include <linux/ptrace.h>
 #include <linux/skbuff.h>
 #include <linux/workqueue.h>
+#include <linux/mutex.h>
 /*****************************************************************************/
 /*                                                                           */
@@ -359,7 +359,7 @@ struct idt77252_dev
        unsigned long           srambase;       /* SAR's sram  base address */
        void __iomem            *fbq[4];        /* FBQ fill addresses */
-        struct semaphore        mutex;
+        struct mutex            mutex;
        spinlock_t              cmd_lock;       /* for r/w utility/sram */
        unsigned long           softstat;
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 3587cb434371..fe088045dd08 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -670,7 +670,7 @@ static void __reschedule_timeout(int drive, const char *message, int marg)
        if (drive == current_reqD)
                drive = current_drive;
        del_timer(&fd_timeout);
-        if (drive < 0 || drive > N_DRIVE) {
+        if (drive < 0 || drive >= N_DRIVE) {
                fd_timeout.expires = jiffies + 20UL * HZ;
                drive = 0;
        } else
diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c
index b0238b46dded..7e04dd69f609 100644
--- a/drivers/bluetooth/hci_usb.c
+++ b/drivers/bluetooth/hci_usb.c
@@ -115,11 +115,11 @@ static struct usb_device_id blacklist_ids[] = {
        { USB_DEVICE(0x0a5c, 0x2009), .driver_info = HCI_BCM92035 },
        /* Broadcom BCM2045 */
-        { USB_DEVICE(0x0a5c, 0x2101), .driver_info = HCI_WRONG_SCO_MTU },
+        { USB_DEVICE(0x0a5c, 0x2101), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
        /* IBM/Lenovo ThinkPad with Broadcom chip */
-        { USB_DEVICE(0x0a5c, 0x201e), .driver_info = HCI_WRONG_SCO_MTU },
+        { USB_DEVICE(0x0a5c, 0x201e), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
-        { USB_DEVICE(0x0a5c, 0x2110), .driver_info = HCI_WRONG_SCO_MTU },
+        { USB_DEVICE(0x0a5c, 0x2110), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
        /* Targus ACB10US */
        { USB_DEVICE(0x0a5c, 0x2100), .driver_info = HCI_RESET },
@@ -128,17 +128,17 @@ static struct usb_device_id blacklist_ids[] = {
        { USB_DEVICE(0x0a5c, 0x2111), .driver_info = HCI_RESET },
        /* HP laptop with Broadcom chip */
-        { USB_DEVICE(0x03f0, 0x171d), .driver_info = HCI_WRONG_SCO_MTU },
+        { USB_DEVICE(0x03f0, 0x171d), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
        /* Dell laptop with Broadcom chip */
-        { USB_DEVICE(0x413c, 0x8126), .driver_info = HCI_WRONG_SCO_MTU },
+        { USB_DEVICE(0x413c, 0x8126), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
        /* Microsoft Wireless Transceiver for Bluetooth 2.0 */
        { USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_RESET },
        /* Kensington Bluetooth USB adapter */
        { USB_DEVICE(0x047d, 0x105d), .driver_info = HCI_RESET },
-        { USB_DEVICE(0x047d, 0x105e), .driver_info = HCI_WRONG_SCO_MTU },
+        { USB_DEVICE(0x047d, 0x105e), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
        /* ISSC Bluetooth Adapter v3.1 */
        { USB_DEVICE(0x1131, 0x1001), .driver_info = HCI_RESET },
@@ -148,8 +148,8 @@ static struct usb_device_id blacklist_ids[] = {
        { USB_DEVICE(0x0400, 0x080a), .driver_info = HCI_BROKEN_ISOC },
        /* Belkin F8T012 and F8T013 devices */
-        { USB_DEVICE(0x050d, 0x0012), .driver_info = HCI_WRONG_SCO_MTU },
+        { USB_DEVICE(0x050d, 0x0012), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
-        { USB_DEVICE(0x050d, 0x0013), .driver_info = HCI_WRONG_SCO_MTU },
+        { USB_DEVICE(0x050d, 0x0013), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
        /* Digianswer devices */
        { USB_DEVICE(0x08fd, 0x0001), .driver_info = HCI_DIGIANSWER },
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index abcafac64738..ef683ebd367c 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -815,7 +815,7 @@ config SGI_IP27_RTC
 config GEN_RTC
        tristate "Generic /dev/rtc emulation"
-        depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV && !S390
+        depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV && !S390 && !SUPERH
        ---help---
          If you say Y here and create a character special file /dev/rtc with
          major number 10 and minor number 135 using mknod ("man mknod"), you
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index c72ee97d3892..ca376b92162c 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -1061,6 +1061,7 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip,
                                if (data & info->ignore_status_mask) {
                                        info->icount.rx++;
+                                        spin_unlock(&cinfo->card_lock);
                                        return;
                                }
                                if (tty_buffer_request_room(tty, 1)) {
diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c
index 6d3840e629de..6a86958b577f 100644
--- a/drivers/crypto/geode-aes.c
+++ b/drivers/crypto/geode-aes.c
@@ -102,10 +102,15 @@ geode_aes_crypt(struct geode_aes_op *op)
        u32 flags = 0;
        unsigned long iflags;
-        if (op->len == 0 || op->src == op->dst)
+        if (op->len == 0)
                return 0;
-        if (op->flags & AES_FLAGS_COHERENT)
+        /* If the source and destination is the same, then
+         * we need to turn on the coherent flags, otherwise
+         * we don't need to worry
+         */
+        if (op->src == op->dst)
                flags |= (AES_CTRL_DCA | AES_CTRL_SCA);
        if (op->dir == AES_DIR_ENCRYPT)
@@ -120,7 +125,7 @@ geode_aes_crypt(struct geode_aes_op *op)
                _writefield(AES_WRITEIV0_REG, op->iv);
        }
-        if (op->flags & AES_FLAGS_USRKEY) {
+        if (!(op->flags & AES_FLAGS_HIDDENKEY)) {
                flags |= AES_CTRL_WRKEY;
                _writefield(AES_WRITEKEY0_REG, op->key);
        }
@@ -289,6 +294,7 @@ static struct crypto_alg geode_cbc_alg = {
                        .setkey                 =       geode_setkey,
                        .encrypt                =       geode_cbc_encrypt,
                        .decrypt                =       geode_cbc_decrypt,
+                        .ivsize                 =       AES_IV_LENGTH,
                }
        }
 };
diff --git a/drivers/crypto/geode-aes.h b/drivers/crypto/geode-aes.h
index 8003a36f3a83..f47968671ae7 100644
--- a/drivers/crypto/geode-aes.h
+++ b/drivers/crypto/geode-aes.h
@@ -20,8 +20,7 @@
 #define AES_DIR_DECRYPT 0
 #define AES_DIR_ENCRYPT 1
-#define AES_FLAGS_USRKEY   (1 << 0)
+#define AES_FLAGS_HIDDENKEY (1 << 0)
-#define AES_FLAGS_COHERENT (1 << 1)
 struct geode_aes_op {
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 0c160675b3ac..366f4a1a2cb8 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -491,6 +491,12 @@ out:
 /* Sysfs Files */
+static ssize_t applesmc_name_show(struct device *dev,
+                                   struct device_attribute *attr, char *buf)
+{
+        return snprintf(buf, PAGE_SIZE, "applesmc\n");
+}
 static ssize_t applesmc_position_show(struct device *dev,
                                   struct device_attribute *attr, char *buf)
 {
@@ -913,6 +919,8 @@ static struct led_classdev applesmc_backlight = {
        .brightness_set         = applesmc_brightness_set,
 };
+static DEVICE_ATTR(name, 0444, applesmc_name_show, NULL);
 static DEVICE_ATTR(position, 0444, applesmc_position_show, NULL);
 static DEVICE_ATTR(calibrate, 0644,
                        applesmc_calibrate_show, applesmc_calibrate_store);
@@ -1197,6 +1205,8 @@ static int __init applesmc_init(void)
                goto out_driver;
        }
+        ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_name.attr);
        /* Create key enumeration sysfs files */
        ret = sysfs_create_group(&pdev->dev.kobj, &key_enumeration_group);
        if (ret)
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index e68a96f589fd..e4540fcf6476 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -830,7 +830,8 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
        i2c->irq = res;
                
-        dev_dbg(&pdev->dev, "irq resource %p (%ld)\n", res, res->start);
+        dev_dbg(&pdev->dev, "irq resource %p (%lu)\n", res,
+                (unsigned long)res->start);
        ret = i2c_add_adapter(&i2c->adap);
        if (ret < 0) {
diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c
index 907999049d50..cb9abe7565a7 100644
--- a/drivers/i2c/busses/i2c-tiny-usb.c
+++ b/drivers/i2c/busses/i2c-tiny-usb.c
@@ -208,7 +208,7 @@ static int i2c_tiny_usb_probe(struct usb_interface *interface,
        dev->adapter.class = I2C_CLASS_HWMON;
        dev->adapter.algo = &usb_algorithm;
        dev->adapter.algo_data = dev;
-        snprintf(dev->adapter.name, I2C_NAME_SIZE,
+        snprintf(dev->adapter.name, sizeof(dev->adapter.name),
                 "i2c-tiny-usb at bus %03d device %03d",
                 dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 64f8e56d300e..435925eba437 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -697,9 +697,10 @@ int i2c_attach_client(struct i2c_client *client)
        if (client->driver)
                client->dev.driver = &client->driver->driver;
-        if (client->driver && !is_newstyle_driver(client->driver))
+        if (client->driver && !is_newstyle_driver(client->driver)) {
                client->dev.release = i2c_client_release;
-        else
+                client->dev.uevent_suppress = 1;
+        } else
                client->dev.release = i2c_client_dev_release;
        snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id),
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index b77b7d138c49..ead141e2db9e 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -119,15 +119,17 @@ static const struct drive_list_entry drive_blacklist [] = {
        { "HITACHI CDR-8335"    ,       "ALL"           },
        { "HITACHI CDR-8435"    ,       "ALL"           },
        { "Toshiba CD-ROM XM-6202B"     ,       "ALL"           },
+        { "TOSHIBA CD-ROM XM-1702BC",   "ALL"           },
        { "CD-532E-A"           ,       "ALL"           },
        { "E-IDE CD-ROM CR-840",        "ALL"           },
        { "CD-ROM Drive/F5A",   "ALL"           },
        { "WPI CDD-820",                "ALL"           },
        { "SAMSUNG CD-ROM SC-148C",     "ALL"           },
        { "SAMSUNG CD-ROM SC",  "ALL"           },
-        { "SanDisk SDP3B-64"    ,       "ALL"           },
        { "ATAPI CD-ROM DRIVE 40X MAXIMUM",     "ALL"           },
        { "_NEC DV5800A",               "ALL"           },  
+        { "SAMSUNG CD-ROM SN-124",      "N001" },
+        { "Seagate STT20000A",          "ALL" },
        { NULL                  ,       NULL            }
 };
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index d50bd996ff22..ea94c9aa1220 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -67,6 +67,8 @@ static int proc_ide_read_imodel
                case ide_4drives:       name = "4drives";       break;
                case ide_pmac:          name = "mac-io";        break;
                case ide_au1xxx:        name = "au1xxx";        break;
+                case ide_etrax100:      name = "etrax100";      break;
+                case ide_acorn:         name = "acorn";         break;
                default:                name = "(unknown)";     break;
        }
        len = sprintf(page, "%s\n", name);
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index 0e52ad722a72..8ab33faf6f76 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -317,6 +317,7 @@ static struct pci_device_id atiixp_pci_tbl[] = {
        { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
        { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
        { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+        { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
        { 0, },
 };
 MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 6234f806c6b5..47bcd91c9b5f 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -158,6 +158,12 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
        pci_read_config_word(dev, 0x4A, &csb5_pio);
        pci_read_config_byte(dev, 0x54, &ultra_enable);
+        /* If we are in RAID mode (eg AMI MegaIDE) then we can't it
+           turns out trust the firmware configuration */
+        if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
+                goto oem_setup_failed;
        /* Per Specified Design by OEM, and ASIC Architect */
        if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
            (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) {
@@ -173,7 +179,7 @@ dma_pio:
                                   ((dma_stat&(1<<(5+unit)))==(1<<(5+unit)))) {
                                u8 dmaspeed = dma_timing;
-                                dma_timing &= ~0xFF;
+                                dma_timing &= ~0xFFU;
                                if ((dmaspeed & 0x20) == 0x20)
                                        dmaspeed = XFER_MW_DMA_2;
                                else if ((dmaspeed & 0x21) == 0x21)
@@ -187,7 +193,7 @@ dma_pio:
                        } else if (pio_timing) {
                                u8 piospeed = pio_timing;
-                                pio_timing &= ~0xFF;
+                                pio_timing &= ~0xFFU;
                                if ((piospeed & 0x20) == 0x20)
                                        piospeed = XFER_PIO_4;
                                else if ((piospeed & 0x22) == 0x22)
@@ -208,8 +214,8 @@ dma_pio:
 oem_setup_failed:
-        pio_timing      &= ~0xFF;
+        pio_timing      &= ~0xFFU;
-        dma_timing      &= ~0xFF;
+        dma_timing      &= ~0xFFU;
        ultra_timing    &= ~(0x0F << (4*unit));
        ultra_enable    &= ~(0x01 << drive->dn);
        csb5_pio        &= ~(0x0F << (4*drive->dn));
diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c
index fb129c479a66..682244b1c042 100644
--- a/drivers/input/joystick/iforce/iforce-main.c
+++ b/drivers/input/joystick/iforce/iforce-main.c
@@ -370,10 +370,8 @@ int iforce_init_device(struct iforce *iforce)
 /*
 * Disable spring, enable force feedback.
- * FIXME: We should use iforce_set_autocenter() et al here.
 */
+        iforce_set_autocenter(input_dev, 0);
-        iforce_send_packet(iforce, FF_CMD_AUTOCENTER, "\004\000");
 /*
 * Find appropriate device entry
diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c
index 21c4e13d3a50..3154ccd74000 100644
--- a/drivers/input/joystick/iforce/iforce-packets.c
+++ b/drivers/input/joystick/iforce/iforce-packets.c
@@ -246,6 +246,8 @@ void iforce_process_packet(struct iforce *iforce, u16 cmd, unsigned char *data)
 int iforce_get_id_packet(struct iforce *iforce, char *packet)
 {
+        int status;
        switch (iforce->bus) {
        case IFORCE_USB:
@@ -254,18 +256,22 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet)
                iforce->cr.bRequest = packet[0];
                iforce->ctrl->dev = iforce->usbdev;
-                if (usb_submit_urb(iforce->ctrl, GFP_ATOMIC))
+                status = usb_submit_urb(iforce->ctrl, GFP_ATOMIC);
+                if (status) {
+                        err("usb_submit_urb failed %d", status);
                        return -1;
+                }
                wait_event_interruptible_timeout(iforce->wait,
                        iforce->ctrl->status != -EINPROGRESS, HZ);
                if (iforce->ctrl->status) {
+                        dbg("iforce->ctrl->status = %d", iforce->ctrl->status);
                        usb_unlink_urb(iforce->ctrl);
                        return -1;
                }
 #else
-                err("iforce_get_id_packet: iforce->bus = USB!");
+                dbg("iforce_get_id_packet: iforce->bus = USB!");
 #endif
                break;
diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c
index 750099d8e3c6..1457b73850e7 100644
--- a/drivers/input/joystick/iforce/iforce-usb.c
+++ b/drivers/input/joystick/iforce/iforce-usb.c
@@ -65,6 +65,7 @@ void iforce_usb_xmit(struct iforce *iforce)
        XMIT_INC(iforce->xmit.tail, n);
        if ( (n=usb_submit_urb(iforce->out, GFP_ATOMIC)) ) {
+                clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags);
                warn("usb_submit_urb failed %d\n", n);
        }
@@ -163,8 +164,8 @@ static int iforce_usb_probe(struct usb_interface *intf,
        usb_fill_int_urb(iforce->irq, dev, usb_rcvintpipe(dev, epirq->bEndpointAddress),
                        iforce->data, 16, iforce_usb_irq, iforce, epirq->bInterval);
-        usb_fill_bulk_urb(iforce->out, dev, usb_sndbulkpipe(dev, epout->bEndpointAddress),
+        usb_fill_int_urb(iforce->out, dev, usb_sndintpipe(dev, epout->bEndpointAddress),
-                        iforce + 1, 32, iforce_usb_out, iforce);
+                        iforce + 1, 32, iforce_usb_out, iforce, epout->bInterval);
        usb_fill_control_urb(iforce->ctrl, dev, usb_rcvctrlpipe(dev, 0),
                        (void*) &iforce->cr, iforce->edata, 16, iforce_usb_ctrl, iforce);
diff --git a/drivers/input/misc/input-polldev.c b/drivers/input/misc/input-polldev.c
index 1b2b9c9c5d88..b773d4c756a6 100644
--- a/drivers/input/misc/input-polldev.c
+++ b/drivers/input/misc/input-polldev.c
@@ -12,6 +12,11 @@
 #include <linux/mutex.h>
 #include <linux/input-polldev.h>
+MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
+MODULE_DESCRIPTION("Generic implementation of a polled input device");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.1");
 static DEFINE_MUTEX(polldev_mutex);
 static int polldev_users;
 static struct workqueue_struct *polldev_wq;
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index cf3e4664e72b..2c5f11a4f6b4 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -251,11 +251,15 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int
        dbg("E7 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]);
-        for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++);
+        if (version) {
-        *version = (param[0] << 8) | (param[1] << 4) | i;
+                for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++)
+                        /* empty */;
+                *version = (param[0] << 8) | (param[1] << 4) | i;
+        }
        for (i = 0; i < ARRAY_SIZE(alps_model_data); i++)
-                if (!memcmp(param, alps_model_data[i].signature, sizeof(alps_model_data[i].signature)))
+                if (!memcmp(param, alps_model_data[i].signature,
+                            sizeof(alps_model_data[i].signature)))
                        return alps_model_data + i;
        return NULL;
@@ -380,32 +384,46 @@ static int alps_poll(struct psmouse *psmouse)
        return 0;
 }
-static int alps_reconnect(struct psmouse *psmouse)
+static int alps_hw_init(struct psmouse *psmouse, int *version)
 {
        struct alps_data *priv = psmouse->private;
-        int version;
-        psmouse_reset(psmouse);
-        if (!(priv->i = alps_get_model(psmouse, &version)))
+        priv->i = alps_get_model(psmouse, version);
+        if (!priv->i)
                return -1;
        if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1))
                return -1;
        if (alps_tap_mode(psmouse, 1)) {
-                printk(KERN_WARNING "alps.c: Failed to reenable hardware tapping\n");
+                printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
                return -1;
        }
        if (alps_absolute_mode(psmouse)) {
-                printk(KERN_ERR "alps.c: Failed to reenable absolute mode\n");
+                printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
                return -1;
        }
        if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0))
                return -1;
+        /* ALPS needs stream mode, otherwise it won't report any data */
+        if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) {
+                printk(KERN_ERR "alps.c: Failed to enable stream mode\n");
+                return -1;
+        }
+        return 0;
+}
+static int alps_reconnect(struct psmouse *psmouse)
+{
+        psmouse_reset(psmouse);
+        if (alps_hw_init(psmouse, NULL))
+                return -1;
        return 0;
 }
@@ -430,23 +448,9 @@ int alps_init(struct psmouse *psmouse)
                goto init_fail;
        priv->dev2 = dev2;
+        psmouse->private = priv;
-        priv->i = alps_get_model(psmouse, &version);
+        if (alps_hw_init(psmouse, &version))
-        if (!priv->i)
-                goto init_fail;
-        if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1))
-                goto init_fail;
-        if (alps_tap_mode(psmouse, 1))
-                printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
-        if (alps_absolute_mode(psmouse)) {
-                printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
-                goto init_fail;
-        }
-        if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0))
                goto init_fail;
        dev1->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
@@ -493,13 +497,13 @@ int alps_init(struct psmouse *psmouse)
        /* We are having trouble resyncing ALPS touchpads so disable it for now */
        psmouse->resync_time = 0;
-        psmouse->private = priv;
        return 0;
 init_fail:
        psmouse_reset(psmouse);
        input_free_device(dev2);
        kfree(priv);
+        psmouse->private = NULL;
        return -1;
 }
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index 9df74b72e6c4..0c5660d28caa 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -221,6 +221,7 @@ static const struct ps2pp_info *get_model_info(unsigned char model)
                { 66,   PS2PP_KIND_MX,                                  /* MX3100 reciver */
                                PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
                                PS2PP_EXTRA_BTN | PS2PP_NAV_BTN | PS2PP_HWHEEL },
+                { 72,   PS2PP_KIND_TRACKMAN,    0 },                    /* T-CH11: TrackMan Marble */
                { 73,   0,                      PS2PP_SIDE_BTN },
                { 75,   PS2PP_KIND_WHEEL,       PS2PP_WHEEL },
                { 76,   PS2PP_KIND_WHEEL,       PS2PP_WHEEL },
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 4f091800bfeb..e5cca9bd0406 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -12,17 +12,17 @@ menuconfig INPUT_TOUCHSCREEN
 if INPUT_TOUCHSCREEN
 config TOUCHSCREEN_ADS7846
-        tristate "ADS 7846/7843 based touchscreens"
+        tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
        depends on SPI_MASTER
        depends on HWMON = n || HWMON
        help
          Say Y here if you have a touchscreen interface using the
-          ADS7846 or ADS7843 controller, and your board-specific setup
+          ADS7846/TSC2046 or ADS7843 controller, and your board-specific
-          code includes that in its table of SPI devices.
+          setup code includes that in its table of SPI devices.
          If HWMON is selected, and the driver is told the reference voltage
          on your board, you will also get hwmon interfaces for the voltage
-          (and on ads7846, temperature) sensors of this chip.
+          (and on ads7846/tsc2046, temperature) sensors of this chip.
          If unsure, say N (but it's safe to say "Y").
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 693e3b2a65a3..1c9069cd3bae 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -39,6 +39,7 @@
 /*
 * This code has been heavily tested on a Nokia 770, and lightly
 * tested on other ads7846 devices (OSK/Mistral, Lubbock).
+ * TSC2046 is just newer ads7846 silicon.
 * Support for ads7843 tested on Atmel at91sam926x-EK.
 * Support for ads7845 has only been stubbed in.
 *
@@ -847,7 +848,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
         * may not.  So we stick to very-portable 8 bit words, both RX and TX.
         */
        spi->bits_per_word = 8;
-        spi->mode = SPI_MODE_1;
+        spi->mode = SPI_MODE_0;
        err = spi_setup(spi);
        if (err < 0)
                return err;
diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c
index 61c15024c2a0..1a15475aedfc 100644
--- a/drivers/input/touchscreen/hp680_ts_input.c
+++ b/drivers/input/touchscreen/hp680_ts_input.c
@@ -1,7 +1,6 @@
 #include <linux/input.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <asm/io.h>
 #include <asm/delay.h>
@@ -18,12 +17,12 @@
 #define PHDR    0xa400012e
 #define SCPDR   0xa4000136
-static void do_softint(void *data);
+static void do_softint(struct work_struct *work);
 static struct input_dev *hp680_ts_dev;
-static DECLARE_WORK(work, do_softint);
+static DECLARE_DELAYED_WORK(work, do_softint);
-static void do_softint(void *data)
+static void do_softint(struct work_struct *work)
 {
        int absx = 0, absy = 0;
        u8 scpdr;
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index 6582816a0477..f0cbcdb008ed 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -288,9 +288,9 @@ static int ucb1400_ts_thread(void *_ucb)
        struct ucb1400 *ucb = _ucb;
        struct task_struct *tsk = current;
        int valid = 0;
+        struct sched_param param = { .sched_priority = 1 };
-        tsk->policy = SCHED_FIFO;
+        sched_setscheduler(tsk, SCHED_FIFO, &param);
-        tsk->rt_priority = 1;
        while (!kthread_should_stop()) {
                unsigned int x, y, p;
diff --git a/drivers/isdn/hardware/eicon/capifunc.c b/drivers/isdn/hardware/eicon/capifunc.c
index ff284aeb8fbb..82edc1c1db7a 100644
--- a/drivers/isdn/hardware/eicon/capifunc.c
+++ b/drivers/isdn/hardware/eicon/capifunc.c
@@ -189,21 +189,21 @@ void *TransmitBufferSet(APPL * appl, dword ref)
 {
        appl->xbuffer_used[ref] = true;
        DBG_PRV1(("%d:xbuf_used(%d)", appl->Id, ref + 1))
-            return (void *) ref;
+            return (void *)(long)ref;
 }
 void *TransmitBufferGet(APPL * appl, void *p)
 {
-        if (appl->xbuffer_internal[(dword) p])
+        if (appl->xbuffer_internal[(dword)(long)p])
-                return appl->xbuffer_internal[(dword) p];
+                return appl->xbuffer_internal[(dword)(long)p];
-        return appl->xbuffer_ptr[(dword) p];
+        return appl->xbuffer_ptr[(dword)(long)p];
 }
 void TransmitBufferFree(APPL * appl, void *p)
 {
-        appl->xbuffer_used[(dword) p] = false;
+        appl->xbuffer_used[(dword)(long)p] = false;
-        DBG_PRV1(("%d:xbuf_free(%d)", appl->Id, ((dword) p) + 1))
+        DBG_PRV1(("%d:xbuf_free(%d)", appl->Id, ((dword)(long)p) + 1))
 }
 void *ReceiveBufferGet(APPL * appl, int Num)
@@ -301,7 +301,7 @@ void sendf(APPL * appl, word command, dword Id, word Number, byte * format, ...)
        /* if DATA_B3_IND, copy data too */
        if (command == _DATA_B3_I) {
                dword data = GET_DWORD(&msg.info.data_b3_ind.Data);
-                memcpy(write + length, (void *) data, dlength);
+                memcpy(write + length, (void *)(long)data, dlength);
        }
 #ifndef DIVA_NO_DEBUGLIB
@@ -318,7 +318,7 @@ void sendf(APPL * appl, word command, dword Id, word Number, byte * format, ...)
                        if (myDriverDebugHandle.dbgMask & DL_BLK) {
                                xlog("\x00\x02", &msg, 0x81, length);
                                for (i = 0; i < dlength; i += 256) {
-                                  DBG_BLK((((char *) GET_DWORD(&msg.info.data_b3_ind.Data)) + i,
+                                  DBG_BLK((((char *)(long)GET_DWORD(&msg.info.data_b3_ind.Data)) + i,
                                        ((dlength - i) < 256) ? (dlength - i) : 256))
                                  if (!(myDriverDebugHandle.dbgMask & DL_PRV0))
                                          break; /* not more if not explicitely requested */
diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c
index 784232a144c8..ccd35d047ec8 100644
--- a/drivers/isdn/hardware/eicon/message.c
+++ b/drivers/isdn/hardware/eicon/message.c
@@ -1,4 +1,3 @@
 /*
 *
  Copyright (c) Eicon Networks, 2002.
@@ -533,7 +532,7 @@ word api_put(APPL   * appl, CAPI_MSG   * msg)
        if (m->header.command == _DATA_B3_R)
        {
-          m->info.data_b3_req.Data = (dword)(TransmitBufferSet (appl, m->info.data_b3_req.Data));
+          m->info.data_b3_req.Data = (dword)(long)(TransmitBufferSet (appl, m->info.data_b3_req.Data));
        }
@@ -1032,7 +1031,7 @@ static void plci_free_msg_in_queue (PLCI   *plci)
      {
        TransmitBufferFree (plci->appl,
-          (byte   *)(((CAPI_MSG   *)(&((byte   *)(plci->msg_in_queue))[i]))->info.data_b3_req.Data));
+          (byte *)(long)(((CAPI_MSG *)(&((byte *)(plci->msg_in_queue))[i]))->info.data_b3_req.Data));
      }
@@ -3118,7 +3117,7 @@ byte data_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci,
       && (((byte   *)(parms[0].info)) < ((byte   *)(plci->msg_in_queue)) + sizeof(plci->msg_in_queue)))
      {
-        data->P = (byte   *)(*((dword   *)(parms[0].info)));
+        data->P = (byte *)(long)(*((dword *)(parms[0].info)));
      }
      else
@@ -3151,7 +3150,7 @@ byte data_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci,
       && (((byte   *)(parms[0].info)) < ((byte   *)(plci->msg_in_queue)) + sizeof(plci->msg_in_queue)))
      {
-        TransmitBufferFree (appl, (byte   *)(*((dword   *)(parms[0].info))));
+        TransmitBufferFree (appl, (byte *)(long)(*((dword *)(parms[0].info))));
      }
    }
@@ -4057,7 +4056,7 @@ capi_callback_suffix:
    {
      if (m->header.command == _DATA_B3_R)
-        TransmitBufferFree (appl, (byte   *)(m->info.data_b3_req.Data));
+        TransmitBufferFree (appl, (byte *)(long)(m->info.data_b3_req.Data));
      dbug(1,dprintf("Error 0x%04x from msg(0x%04x)", i, m->header.command));
      break;
@@ -7134,7 +7133,7 @@ void nl_ind(PLCI   * plci)
  case N_UDATA:
    if (!(udata_forwarding_table[plci->NL.RBuffer->P[0] >> 5] & (1L << (plci->NL.RBuffer->P[0] & 0x1f))))
    {
-      plci->RData[0].P = plci->internal_ind_buffer + (-((int)(plci->internal_ind_buffer)) & 3);
+      plci->RData[0].P = plci->internal_ind_buffer + (-((int)(long)(plci->internal_ind_buffer)) & 3);
      plci->RData[0].PLength = INTERNAL_IND_BUFFER_SIZE;
      plci->NL.R = plci->RData;
      plci->NL.RNum = 1;
diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c
index da4196f21e0f..8d53a7fd2671 100644
--- a/drivers/isdn/hisax/config.c
+++ b/drivers/isdn/hisax/config.c
@@ -1551,7 +1551,7 @@ int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[],
        if (retval == 0) { // yuck
                cards[i].typ = 0;
                nrcards--;
-                return retval;
+                return -EINVAL;
        }
        cs = cards[i].cs;
        hisax_d_if->cs = cs;
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index 1f18f1993387..b1a26e02df02 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -485,7 +485,6 @@ fill_isoc_urb(struct urb *urb, struct usb_device *dev, unsigned int pipe,
 {
        int k;
-        spin_lock_init(&urb->lock);
        urb->dev = dev;
        urb->pipe = pipe;
        urb->complete = complete;
@@ -578,16 +577,14 @@ stop_isoc_chain(usb_fifo * fifo)
                            "HFC-S USB: Stopping iso chain for fifo %i.%i",
                            fifo->fifonum, i);
 #endif
-                        usb_unlink_urb(fifo->iso[i].purb);
+                        usb_kill_urb(fifo->iso[i].purb);
                        usb_free_urb(fifo->iso[i].purb);
                        fifo->iso[i].purb = NULL;
                }
        }
-        if (fifo->urb) {
+        usb_kill_urb(fifo->urb);
-                usb_unlink_urb(fifo->urb);
+        usb_free_urb(fifo->urb);
-                usb_free_urb(fifo->urb);
+        fifo->urb = NULL;
-                fifo->urb = NULL;
-        }
        fifo->active = 0;
 }
@@ -1305,7 +1302,11 @@ usb_init(hfcusb_data * hfc)
        }
        /* default Prot: EURO ISDN, should be a module_param */
        hfc->protocol = 2;
-        hisax_register(&hfc->d_if, p_b_if, "hfc_usb", hfc->protocol);
+        i = hisax_register(&hfc->d_if, p_b_if, "hfc_usb", hfc->protocol);
+        if (i) {
+                printk(KERN_INFO "HFC-S USB: hisax_register -> %d\n", i);
+                return i;
+        }
 #ifdef CONFIG_HISAX_DEBUG
        hfc_debug = debug;
@@ -1626,11 +1627,9 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 #endif
                        /* init the chip and register the driver */
                        if (usb_init(context)) {
-                                if (context->ctrl_urb) {
+                                usb_kill_urb(context->ctrl_urb);
-                                        usb_unlink_urb(context->ctrl_urb);
+                                usb_free_urb(context->ctrl_urb);
-                                        usb_free_urb(context->ctrl_urb);
+                                context->ctrl_urb = NULL;
-                                        context->ctrl_urb = NULL;
-                                }
                                kfree(context);
                                return (-EIO);
                        }
@@ -1682,21 +1681,15 @@ hfc_usb_disconnect(struct usb_interface
                                    i);
 #endif
                        }
-                        if (context->fifos[i].urb) {
+                        usb_kill_urb(context->fifos[i].urb);
-                                usb_unlink_urb(context->fifos[i].urb);
+                        usb_free_urb(context->fifos[i].urb);
-                                usb_free_urb(context->fifos[i].urb);
+                        context->fifos[i].urb = NULL;
-                                context->fifos[i].urb = NULL;
-                        }
                }
                context->fifos[i].active = 0;
        }
-        /* wait for all URBS to terminate */
+        usb_kill_urb(context->ctrl_urb);
-        mdelay(10);
+        usb_free_urb(context->ctrl_urb);
-        if (context->ctrl_urb) {
+        context->ctrl_urb = NULL;
-                usb_unlink_urb(context->ctrl_urb);
-                usb_free_urb(context->ctrl_urb);
-                context->ctrl_urb = NULL;
-        }
        hisax_unregister(&context->d_if);
        kfree(context);         /* free our structure again */
 }                               /* hfc_usb_disconnect */
diff --git a/drivers/isdn/hisax/hisax_fcpcipnp.c b/drivers/isdn/hisax/hisax_fcpcipnp.c
index 9e088fce8c3a..7993e01f9fc5 100644
--- a/drivers/isdn/hisax/hisax_fcpcipnp.c
+++ b/drivers/isdn/hisax/hisax_fcpcipnp.c
@@ -859,7 +859,11 @@ new_adapter(void)
        for (i = 0; i < 2; i++)
                b_if[i] = &adapter->bcs[i].b_if;
-        hisax_register(&adapter->isac.hisax_d_if, b_if, "fcpcipnp", protocol);
+        if (hisax_register(&adapter->isac.hisax_d_if, b_if, "fcpcipnp",
+                        protocol) != 0) {
+                kfree(adapter);
+                adapter = NULL;
+        }
        return adapter;
 }
diff --git a/drivers/isdn/hisax/st5481_init.c b/drivers/isdn/hisax/st5481_init.c
index bb3a28a53ff4..13751237bfcd 100644
--- a/drivers/isdn/hisax/st5481_init.c
+++ b/drivers/isdn/hisax/st5481_init.c
@@ -107,12 +107,17 @@ static int probe_st5481(struct usb_interface *intf,
        for (i = 0; i < 2; i++)
                b_if[i] = &adapter->bcs[i].b_if;
-        hisax_register(&adapter->hisax_d_if, b_if, "st5481_usb", protocol);
+        if (hisax_register(&adapter->hisax_d_if, b_if, "st5481_usb",
+                        protocol) != 0)
+                goto err_b1;
        st5481_start(adapter);
        usb_set_intfdata(intf, adapter);
        return 0;
+ err_b1:
+        st5481_release_b(&adapter->bcs[1]);
 err_b:
        st5481_release_b(&adapter->bcs[0]);
 err_d:
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
index ff1595122048..4ada66b8b679 100644
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -407,7 +407,6 @@ fill_isoc_urb(struct urb *urb, struct usb_device *dev,
 {
        int k;
-        spin_lock_init(&urb->lock);
        urb->dev=dev;
        urb->pipe=pipe;
        urb->interval = 1;
diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c
index b77ef5187d6d..b46817f699f1 100644
--- a/drivers/macintosh/adbhid.c
+++ b/drivers/macintosh/adbhid.c
@@ -628,16 +628,16 @@ static void real_leds(unsigned char leds, int device)
 */
 static int adbhid_kbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
-        struct adbhid *adbhid = dev->private;
+        struct adbhid *adbhid = input_get_drvdata(dev);
        unsigned char leds;
        switch (type) {
        case EV_LED:
-          leds = (test_bit(LED_SCROLLL, dev->led) ? 4 : 0)
+                leds =  (test_bit(LED_SCROLLL, dev->led) ? 4 : 0) |
-               | (test_bit(LED_NUML,    dev->led) ? 1 : 0)
+                        (test_bit(LED_NUML,    dev->led) ? 1 : 0) |
-               | (test_bit(LED_CAPSL,   dev->led) ? 2 : 0);
+                        (test_bit(LED_CAPSL,   dev->led) ? 2 : 0);
-          real_leds(leds, adbhid->id);
+                real_leds(leds, adbhid->id);
-          return 0;
+                return 0;
        }
        return -1;
@@ -649,7 +649,7 @@ adb_message_handler(struct notifier_block *this, unsigned long code, void *x)
        switch (code) {
        case ADB_MSG_PRE_RESET:
        case ADB_MSG_POWERDOWN:
-                /* Stop the repeat timer. Autopoll is already off at this point */
+                /* Stop the repeat timer. Autopoll is already off at this point */
                {
                        int i;
                        for (i = 1; i < 16; i++) {
@@ -699,7 +699,7 @@ adbhid_input_register(int id, int default_id, int original_handler_id,
        hid->current_handler_id = current_handler_id;
        hid->mouse_kind = mouse_kind;
        hid->flags = 0;
-        input_dev->private = hid;
+        input_set_drvdata(input_dev, hid);
        input_dev->name = hid->name;
        input_dev->phys = hid->phys;
        input_dev->id.bustype = BUS_ADB;
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 5a4a74c1097c..9620d452d030 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -255,19 +255,25 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long inde
 }
-static int write_sb_page(mddev_t *mddev, long offset, struct page *page, int wait)
+static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait)
 {
        mdk_rdev_t *rdev;
        struct list_head *tmp;
+        mddev_t *mddev = bitmap->mddev;
        ITERATE_RDEV(mddev, rdev, tmp)
                if (test_bit(In_sync, &rdev->flags)
-                    && !test_bit(Faulty, &rdev->flags))
+                    && !test_bit(Faulty, &rdev->flags)) {
+                        int size = PAGE_SIZE;
+                        if (page->index == bitmap->file_pages-1)
+                                size = roundup(bitmap->last_page_size,
+                                               bdev_hardsect_size(rdev->bdev));
                        md_super_write(mddev, rdev,
-                                       (rdev->sb_offset<<1) + offset
+                                       (rdev->sb_offset<<1) + bitmap->offset
                                       + page->index * (PAGE_SIZE/512),
-                                       PAGE_SIZE,
+                                       size,
                                       page);
+                }
        if (wait)
                md_super_wait(mddev);
@@ -282,7 +288,7 @@ static int write_page(struct bitmap *bitmap, struct page *page, int wait)
        struct buffer_head *bh;
        if (bitmap->file == NULL)
-                return write_sb_page(bitmap->mddev, bitmap->offset, page, wait);
+                return write_sb_page(bitmap, page, wait);
        bh = page_buffers(page);
@@ -923,6 +929,7 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
                        }
                        bitmap->filemap[bitmap->file_pages++] = page;
+                        bitmap->last_page_size = count;
                }
                paddr = kmap_atomic(page, KM_USER0);
                if (bitmap->flags & BITMAP_HOSTENDIAN)
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index d5ecd2d53046..192741083196 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -139,8 +139,6 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks)
        if (!conf)
                return NULL;
-        mddev->private = conf;
        cnt = 0;
        conf->array_size = 0;
@@ -232,7 +230,7 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks)
         * First calculate the device offsets.
         */
        conf->disks[0].offset = 0;
-        for (i=1; i<mddev->raid_disks; i++)
+        for (i = 1; i < raid_disks; i++)
                conf->disks[i].offset =
                        conf->disks[i-1].offset +
                        conf->disks[i-1].size;
@@ -244,7 +242,7 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks)
             curr_offset < conf->array_size;
             curr_offset += conf->hash_spacing) {
-                while (i < mddev->raid_disks-1 &&
+                while (i < raid_disks-1 &&
                       curr_offset >= conf->disks[i+1].offset)
                        i++;
@@ -299,9 +297,11 @@ static int linear_add(mddev_t *mddev, mdk_rdev_t *rdev)
         */
        linear_conf_t *newconf;
-        if (rdev->raid_disk != mddev->raid_disks)
+        if (rdev->saved_raid_disk != mddev->raid_disks)
                return -EINVAL;
+        rdev->raid_disk = rdev->saved_raid_disk;
        newconf = linear_conf(mddev,mddev->raid_disks+1);
        if (!newconf)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index c10ce91b64e9..1c54f3c1cca7 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1298,8 +1298,9 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev)
        ITERATE_RDEV(mddev,rdev2,tmp)
                if (rdev2->desc_nr+1 > max_dev)
                        max_dev = rdev2->desc_nr+1;
-        
-        sb->max_dev = cpu_to_le32(max_dev);
+        if (max_dev > le32_to_cpu(sb->max_dev))
+                sb->max_dev = cpu_to_le32(max_dev);
        for (i=0; i<max_dev;i++)
                sb->dev_roles[i] = cpu_to_le16(0xfffe);
        
@@ -1365,10 +1366,14 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev)
        }
        /* make sure rdev->size exceeds mddev->size */
        if (rdev->size && (mddev->size == 0 || rdev->size < mddev->size)) {
-                if (mddev->pers)
+                if (mddev->pers) {
-                        /* Cannot change size, so fail */
+                        /* Cannot change size, so fail
-                        return -ENOSPC;
+                         * If mddev->level <= 0, then we don't care
-                else
+                         * about aligning sizes (e.g. linear)
+                         */
+                        if (mddev->level > 0)
+                                return -ENOSPC;
+                } else
                        mddev->size = rdev->size;
        }
@@ -2142,6 +2147,9 @@ static void analyze_sbs(mddev_t * mddev)
                        rdev->desc_nr = i++;
                        rdev->raid_disk = rdev->desc_nr;
                        set_bit(In_sync, &rdev->flags);
+                } else if (rdev->raid_disk >= mddev->raid_disks) {
+                        rdev->raid_disk = -1;
+                        clear_bit(In_sync, &rdev->flags);
                }
        }
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index dfe32149ad3a..2c404f73a377 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -415,7 +415,7 @@ static int raid0_make_request (request_queue_t *q, struct bio *bio)
        raid0_conf_t *conf = mddev_to_conf(mddev);
        struct strip_zone *zone;
        mdk_rdev_t *tmp_dev;
-        unsigned long chunk;
+        sector_t chunk;
        sector_t block, rsect;
        const int rw = bio_data_dir(bio);
@@ -470,7 +470,6 @@ static int raid0_make_request (request_queue_t *q, struct bio *bio)
                sector_div(x, zone->nb_dev);
                chunk = x;
-                BUG_ON(x != (sector_t)chunk);
                x = block >> chunksize_bits;
                tmp_dev = zone->dev[sector_div(x, zone->nb_dev)];
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index 0393a3d19920..e908e3cf1e50 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -1721,9 +1721,6 @@ static void dst_release(struct dvb_frontend *fe)
                symbol_put(dst_ca_attach);
 #endif
        }
-#ifdef CONFIG_DVB_CORE_ATTACH
-        symbol_put(dst_attach);
-#endif
        kfree(state);
 }
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index e23d8a0ea1d3..a9fa3337dd81 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -200,7 +200,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 {
        struct dvb_device *dvbdev;
        struct file_operations *dvbdevfops;
+        struct class_device *clsdev;
        int id;
        mutex_lock(&dvbdev_register_lock);
@@ -242,8 +242,15 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
        mutex_unlock(&dvbdev_register_lock);
-        class_device_create(dvb_class, NULL, MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)),
+        clsdev = class_device_create(dvb_class, NULL, MKDEV(DVB_MAJOR,
-                            adap->device, "dvb%d.%s%d", adap->num, dnames[type], id);
+                                     nums2minor(adap->num, type, id)),
+                                     adap->device, "dvb%d.%s%d", adap->num,
+                                     dnames[type], id);
+        if (IS_ERR(clsdev)) {
+                printk(KERN_ERR "%s: failed to create device dvb%d.%s%d (%ld)\n",
+                       __FUNCTION__, adap->num, dnames[type], id, PTR_ERR(clsdev));
+                return PTR_ERR(clsdev);
+        }
        dprintk("DVB: register adapter%d/%s%d @ minor: %i (0x%02x)\n",
                adap->num, dnames[type], id, nums2minor(adap->num, type, id),
@@ -431,7 +438,7 @@ static void __exit exit_dvbdev(void)
        unregister_chrdev_region(MKDEV(DVB_MAJOR, 0), MAX_DVB_MINORS);
 }
-module_init(init_dvbdev);
+subsys_initcall(init_dvbdev);
 module_exit(exit_dvbdev);
 MODULE_DESCRIPTION("DVB Core Driver");
diff --git a/drivers/media/video/cafe_ccic-regs.h b/drivers/media/video/cafe_ccic-regs.h
index b2c22a0d6643..8e2a87cdc791 100644
--- a/drivers/media/video/cafe_ccic-regs.h
+++ b/drivers/media/video/cafe_ccic-regs.h
@@ -150,6 +150,12 @@
 #define REG_GL_IMASK   0x300c  /* Interrupt mask register */
 #define   GIMSK_CCIC_EN          0x00000004    /* CCIC Interrupt enable */
+#define REG_GL_FCR      0x3038  /* GPIO functional control register */
+#define   GFCR_GPIO_ON    0x08          /* Camera GPIO enabled */
+#define REG_GL_GPIOR    0x315c  /* GPIO register */
+#define   GGPIO_OUT             0x80000 /* GPIO output */
+#define   GGPIO_VAL             0x00008 /* Output pin value */
 #define REG_LEN                REG_GL_IMASK + 4
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 96254dbaf625..c08f650df423 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -775,6 +775,12 @@ static void cafe_ctlr_power_up(struct cafe_camera *cam)
        spin_lock_irqsave(&cam->dev_lock, flags);
        cafe_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN);
        /*
+         * Part one of the sensor dance: turn the global
+         * GPIO signal on.
+         */
+        cafe_reg_write(cam, REG_GL_FCR, GFCR_GPIO_ON);
+        cafe_reg_write(cam, REG_GL_GPIOR, GGPIO_OUT|GGPIO_VAL);
+        /*
         * Put the sensor into operational mode (assumes OLPC-style
         * wiring).  Control 0 is reset - set to 1 to operate.
         * Control 1 is power down, set to 0 to operate.
@@ -784,6 +790,7 @@ static void cafe_ctlr_power_up(struct cafe_camera *cam)
        cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C0);
 //      mdelay(1); /* Enough? */
        spin_unlock_irqrestore(&cam->dev_lock, flags);
+        msleep(5); /* Just to be sure */
 }
 static void cafe_ctlr_power_down(struct cafe_camera *cam)
@@ -792,6 +799,8 @@ static void cafe_ctlr_power_down(struct cafe_camera *cam)
        spin_lock_irqsave(&cam->dev_lock, flags);
        cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C1);
+        cafe_reg_write(cam, REG_GL_FCR, GFCR_GPIO_ON);
+        cafe_reg_write(cam, REG_GL_GPIOR, GGPIO_OUT);
        cafe_reg_set_bit(cam, REG_CTRL1, C1_PWRDWN);
        spin_unlock_irqrestore(&cam->dev_lock, flags);
 }
@@ -851,6 +860,7 @@ static int cafe_cam_init(struct cafe_camera *cam)
        ret = 0;
        cam->state = S_IDLE;
  out:
+        cafe_ctlr_power_down(cam);
        mutex_unlock(&cam->s_mutex);
        return ret;
 }
@@ -2103,10 +2113,16 @@ static int cafe_pci_probe(struct pci_dev *pdev,
        ret = request_irq(pdev->irq, cafe_irq, IRQF_SHARED, "cafe-ccic", cam);
        if (ret)
                goto out_iounmap;
+        /*
+         * Initialize the controller and leave it powered up.  It will
+         * stay that way until the sensor driver shows up.
+         */
        cafe_ctlr_init(cam);
        cafe_ctlr_power_up(cam);
        /*
-         * Set up I2C/SMBUS communications
+         * Set up I2C/SMBUS communications.  We have to drop the mutex here
+         * because the sensor could attach in this call chain, leading to
+         * unsightly deadlocks.
         */
        mutex_unlock(&cam->s_mutex);  /* attach can deadlock */
        ret = cafe_smbus_setup(cam);
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 2c450bd05af5..5b6a40371602 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,7 +1,6 @@
 config VIDEO_EM28XX
        tristate "Empia EM2800/2820/2840 USB video capture support"
-        depends on VIDEO_V4L1 && I2C && PCI
+        depends on VIDEO_V4L1 && I2C
-        select VIDEO_BUF
        select VIDEO_TUNER
        select VIDEO_TVEEPROM
        select VIDEO_IR
diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig
index 0cc98a0e2496..1aaeaa02f158 100644
--- a/drivers/media/video/ivtv/Kconfig
+++ b/drivers/media/video/ivtv/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_IVTV
        tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
-        depends on VIDEO_V4L1 && VIDEO_V4L2 && USB && I2C && EXPERIMENTAL && PCI
+        depends on VIDEO_V4L1 && VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL
        select FW_LOADER
        select VIDEO_TUNER
        select VIDEO_TVEEPROM
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index 9a412d6c6d06..552f04511ead 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -67,14 +67,6 @@
 #include <media/ivtv.h>
-#ifdef CONFIG_LIRC_I2C
-#  error "This driver is not compatible with the LIRC I2C kernel configuration option."
-#endif /* CONFIG_LIRC_I2C */
-#ifndef CONFIG_PCI
-#  error "This driver requires kernel PCI support."
-#endif /* CONFIG_PCI */
 #define IVTV_ENCODER_OFFSET     0x00000000
 #define IVTV_ENCODER_SIZE       0x00800000      /* Last half isn't needed 0x01000000 */
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index 794a6a02f82f..1989ec1cb973 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -362,8 +362,6 @@ static int ivtv_get_fmt(struct ivtv *itv, int streamtype, struct v4l2_format *fm
        case V4L2_BUF_TYPE_VIDEO_OUTPUT:
                if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT))
                        return -EINVAL;
-                fmt->fmt.pix.left = itv->main_rect.left;
-                fmt->fmt.pix.top = itv->main_rect.top;
                fmt->fmt.pix.width = itv->main_rect.width;
                fmt->fmt.pix.height = itv->main_rect.height;
                fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
@@ -402,8 +400,6 @@ static int ivtv_get_fmt(struct ivtv *itv, int streamtype, struct v4l2_format *fm
                break;
        case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-                fmt->fmt.pix.left = 0;
-                fmt->fmt.pix.top = 0;
                fmt->fmt.pix.width = itv->params.width;
                fmt->fmt.pix.height = itv->params.height;
                fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
@@ -498,15 +494,13 @@ static int ivtv_try_or_set_fmt(struct ivtv *itv, int streamtype,
                if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT))
                        return -EINVAL;
                field = fmt->fmt.pix.field;
-                r.top = fmt->fmt.pix.top;
+                r.top = 0;
-                r.left = fmt->fmt.pix.left;
+                r.left = 0;
                r.width = fmt->fmt.pix.width;
                r.height = fmt->fmt.pix.height;
                ivtv_get_fmt(itv, streamtype, fmt);
                if (itv->output_mode != OUT_UDMA_YUV) {
                        /* TODO: would setting the rect also be valid for this mode? */
-                        fmt->fmt.pix.top = r.top;
-                        fmt->fmt.pix.left = r.left;
                        fmt->fmt.pix.width = r.width;
                        fmt->fmt.pix.height = r.height;
                }
@@ -1141,8 +1135,6 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void
                fb->fmt.pixelformat = itv->osd_pixelformat;
                fb->fmt.width = itv->osd_rect.width;
                fb->fmt.height = itv->osd_rect.height;
-                fb->fmt.left = itv->osd_rect.left;
-                fb->fmt.top = itv->osd_rect.top;
                fb->base = (void *)itv->osd_video_pbase;
                if (itv->osd_global_alpha_state)
                        fb->flags |= V4L2_FBUF_FLAG_GLOBAL_ALPHA;
diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c
index 03bc369a9e49..3ceb8a6249dd 100644
--- a/drivers/media/video/ov7670.c
+++ b/drivers/media/video/ov7670.c
@@ -720,12 +720,22 @@ static int ov7670_s_fmt(struct i2c_client *c, struct v4l2_format *fmt)
        struct ov7670_format_struct *ovfmt;
        struct ov7670_win_size *wsize;
        struct ov7670_info *info = i2c_get_clientdata(c);
-        unsigned char com7;
+        unsigned char com7, clkrc;
        ret = ov7670_try_fmt(c, fmt, &ovfmt, &wsize);
        if (ret)
                return ret;
        /*
+         * HACK: if we're running rgb565 we need to grab then rewrite
+         * CLKRC.  If we're *not*, however, then rewriting clkrc hoses
+         * the colors.
+         */
+        if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB565) {
+                ret = ov7670_read(c, REG_CLKRC, &clkrc);
+                if (ret)
+                        return ret;
+        }
+        /*
         * COM7 is a pain in the ass, it doesn't like to be read then
         * quickly written afterward.  But we have everything we need
         * to set it absolutely here, as long as the format-specific
@@ -744,7 +754,10 @@ static int ov7670_s_fmt(struct i2c_client *c, struct v4l2_format *fmt)
        if (wsize->regs)
                ret = ov7670_write_array(c, wsize->regs);
        info->fmt = ovfmt;
-        return 0;
+        if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB565 && ret == 0)
+                ret = ov7670_write(c, REG_CLKRC, clkrc);
+        return ret;
 }
 /*
@@ -1267,7 +1280,9 @@ static int ov7670_attach(struct i2c_adapter *adapter)
        ret = ov7670_detect(client);
        if (ret)
                goto out_free_info;
-        i2c_attach_client(client);
+        ret = i2c_attach_client(client);
+        if (ret)
+                goto out_free_info;
        return 0;
  out_free_info:
diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c
index 1b9b0742f753..c40b92ce1fad 100644
--- a/drivers/media/video/tuner-simple.c
+++ b/drivers/media/video/tuner-simple.c
@@ -205,9 +205,13 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
                /* 0x01 -> ??? no change ??? */
                /* 0x02 -> PAL BDGHI / SECAM L */
                /* 0x04 -> ??? PAL others / SECAM others ??? */
-                cb &= ~0x02;
+                cb &= ~0x03;
-                if (t->std & V4L2_STD_SECAM)
+                if (t->std & V4L2_STD_SECAM_L) //also valid for V4L2_STD_SECAM
-                        cb |= 0x02;
+                        cb |= PHILIPS_MF_SET_PAL_L;
+                else if (t->std & V4L2_STD_SECAM_LC)
+                        cb |= PHILIPS_MF_SET_PAL_L2;
+                else /* V4L2_STD_B|V4L2_STD_GH */
+                        cb |= PHILIPS_MF_SET_BG;
                break;
        case TUNER_TEMIC_4046FM5:
diff --git a/drivers/message/i2o/driver.c b/drivers/message/i2o/driver.c
index d3235f213c89..e0d474b17433 100644
--- a/drivers/message/i2o/driver.c
+++ b/drivers/message/i2o/driver.c
@@ -123,8 +123,12 @@ int i2o_driver_register(struct i2o_driver *drv)
        }
        rc = driver_register(&drv->driver);
-        if (rc)
+        if (rc) {
-                destroy_workqueue(drv->event_queue);
+                if (drv->event) {
+                        destroy_workqueue(drv->event_queue);
+                        drv->event_queue = NULL;
+                }
+        }
        return rc;
 };
@@ -256,7 +260,7 @@ void i2o_driver_notify_controller_add_all(struct i2o_controller *c)
        int i;
        struct i2o_driver *drv;
-        for (i = 0; i < I2O_MAX_DRIVERS; i++) {
+        for (i = 0; i < i2o_max_drivers; i++) {
                drv = i2o_drivers[i];
                if (drv)
@@ -276,7 +280,7 @@ void i2o_driver_notify_controller_remove_all(struct i2o_controller *c)
        int i;
        struct i2o_driver *drv;
-        for (i = 0; i < I2O_MAX_DRIVERS; i++) {
+        for (i = 0; i < i2o_max_drivers; i++) {
                drv = i2o_drivers[i];
                if (drv)
@@ -295,7 +299,7 @@ void i2o_driver_notify_device_add_all(struct i2o_device *i2o_dev)
        int i;
        struct i2o_driver *drv;
-        for (i = 0; i < I2O_MAX_DRIVERS; i++) {
+        for (i = 0; i < i2o_max_drivers; i++) {
                drv = i2o_drivers[i];
                if (drv)
@@ -314,7 +318,7 @@ void i2o_driver_notify_device_remove_all(struct i2o_device *i2o_dev)
        int i;
        struct i2o_driver *drv;
-        for (i = 0; i < I2O_MAX_DRIVERS; i++) {
+        for (i = 0; i < i2o_max_drivers; i++) {
                drv = i2o_drivers[i];
                if (drv)
@@ -335,17 +339,15 @@ int __init i2o_driver_init(void)
        spin_lock_init(&i2o_drivers_lock);
-        if ((i2o_max_drivers < 2) || (i2o_max_drivers > 64) ||
+        if ((i2o_max_drivers < 2) || (i2o_max_drivers > 64)) {
-            ((i2o_max_drivers ^ (i2o_max_drivers - 1)) !=
+                osm_warn("max_drivers set to %d, but must be >=2 and <= 64\n",
-             (2 * i2o_max_drivers - 1))) {
+                         i2o_max_drivers);
-                osm_warn("max_drivers set to %d, but must be >=2 and <= 64 and "
-                         "a power of 2\n", i2o_max_drivers);
                i2o_max_drivers = I2O_MAX_DRIVERS;
        }
        osm_info("max drivers = %d\n", i2o_max_drivers);
        i2o_drivers =
-            kzalloc(i2o_max_drivers * sizeof(*i2o_drivers), GFP_KERNEL);
+            kcalloc(i2o_max_drivers, sizeof(*i2o_drivers), GFP_KERNEL);
        if (!i2o_drivers)
                return -ENOMEM;
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index cb8c264eaff0..7772bd1d92b4 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -207,16 +207,7 @@ static int ucb1x00_thread(void *_ts)
        struct ucb1x00_ts *ts = _ts;
        struct task_struct *tsk = current;
        DECLARE_WAITQUEUE(wait, tsk);
-        int valid;
+        int valid = 0;
-        /*
-         * We could run as a real-time thread.  However, thus far
-         * this doesn't seem to be necessary.
-         */
-//      tsk->policy = SCHED_FIFO;
-//      tsk->rt_priority = 1;
-        valid = 0;
        add_wait_queue(&ts->irq_wait, &wait);
        while (!kthread_should_stop()) {
diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c
index 35b139b0e5f2..5108b7c576df 100644
--- a/drivers/misc/phantom.c
+++ b/drivers/misc/phantom.c
@@ -47,6 +47,7 @@ struct phantom_device {
        struct cdev cdev;
        struct mutex open_lock;
+        spinlock_t ioctl_lock;
 };
 static unsigned char phantom_devices[PHANTOM_MAX_MINORS];
@@ -59,8 +60,11 @@ static int phantom_status(struct phantom_device *dev, unsigned long newstat)
                atomic_set(&dev->counter, 0);
                iowrite32(PHN_CTL_IRQ, dev->iaddr + PHN_CONTROL);
                iowrite32(0x43, dev->caddr + PHN_IRQCTL);
-        } else if ((dev->status & PHB_RUNNING) && !(newstat & PHB_RUNNING))
+                ioread32(dev->caddr + PHN_IRQCTL); /* PCI posting */
+        } else if ((dev->status & PHB_RUNNING) && !(newstat & PHB_RUNNING)) {
                iowrite32(0, dev->caddr + PHN_IRQCTL);
+                ioread32(dev->caddr + PHN_IRQCTL); /* PCI posting */
+        }
        dev->status = newstat;
@@ -71,8 +75,8 @@ static int phantom_status(struct phantom_device *dev, unsigned long newstat)
 * File ops
 */
-static int phantom_ioctl(struct inode *inode, struct file *file, u_int cmd,
+static long phantom_ioctl(struct file *file, unsigned int cmd,
-        u_long arg)
+                unsigned long arg)
 {
        struct phantom_device *dev = file->private_data;
        struct phm_regs rs;
@@ -92,24 +96,32 @@ static int phantom_ioctl(struct inode *inode, struct file *file, u_int cmd,
                if (r.reg > 7)
                        return -EINVAL;
+                spin_lock(&dev->ioctl_lock);
                if (r.reg == PHN_CONTROL && (r.value & PHN_CTL_IRQ) &&
-                                phantom_status(dev, dev->status | PHB_RUNNING))
+                                phantom_status(dev, dev->status | PHB_RUNNING)){
+                        spin_unlock(&dev->ioctl_lock);
                        return -ENODEV;
+                }
                pr_debug("phantom: writing %x to %u\n", r.value, r.reg);
                iowrite32(r.value, dev->iaddr + r.reg);
+                ioread32(dev->iaddr); /* PCI posting */
                if (r.reg == PHN_CONTROL && !(r.value & PHN_CTL_IRQ))
                        phantom_status(dev, dev->status & ~PHB_RUNNING);
+                spin_unlock(&dev->ioctl_lock);
                break;
        case PHN_SET_REGS:
                if (copy_from_user(&rs, argp, sizeof(rs)))
                        return -EFAULT;
                pr_debug("phantom: SRS %u regs %x\n", rs.count, rs.mask);
+                spin_lock(&dev->ioctl_lock);
                for (i = 0; i < min(rs.count, 8U); i++)
                        if ((1 << i) & rs.mask)
                                iowrite32(rs.values[i], dev->oaddr + i);
+                ioread32(dev->iaddr); /* PCI posting */
+                spin_unlock(&dev->ioctl_lock);
                break;
        case PHN_GET_REG:
                if (copy_from_user(&r, argp, sizeof(r)))
@@ -128,9 +140,11 @@ static int phantom_ioctl(struct inode *inode, struct file *file, u_int cmd,
                        return -EFAULT;
                pr_debug("phantom: GRS %u regs %x\n", rs.count, rs.mask);
+                spin_lock(&dev->ioctl_lock);
                for (i = 0; i < min(rs.count, 8U); i++)
                        if ((1 << i) & rs.mask)
                                rs.values[i] = ioread32(dev->iaddr + i);
+                spin_unlock(&dev->ioctl_lock);
                if (copy_to_user(argp, &rs, sizeof(rs)))
                        return -EFAULT;
@@ -199,7 +213,7 @@ static unsigned int phantom_poll(struct file *file, poll_table *wait)
 static struct file_operations phantom_file_ops = {
        .open = phantom_open,
        .release = phantom_release,
-        .ioctl = phantom_ioctl,
+        .unlocked_ioctl = phantom_ioctl,
        .poll = phantom_poll,
 };
@@ -212,6 +226,7 @@ static irqreturn_t phantom_isr(int irq, void *data)
        iowrite32(0, dev->iaddr);
        iowrite32(0xc0, dev->iaddr);
+        ioread32(dev->iaddr); /* PCI posting */
        atomic_inc(&dev->counter);
        wake_up_interruptible(&dev->wait);
@@ -282,11 +297,13 @@ static int __devinit phantom_probe(struct pci_dev *pdev,
        }
        mutex_init(&pht->open_lock);
+        spin_lock_init(&pht->ioctl_lock);
        init_waitqueue_head(&pht->wait);
        cdev_init(&pht->cdev, &phantom_file_ops);
        pht->cdev.owner = THIS_MODULE;
        iowrite32(0, pht->caddr + PHN_IRQCTL);
+        ioread32(pht->caddr + PHN_IRQCTL); /* PCI posting */
        retval = request_irq(pdev->irq, phantom_isr,
                        IRQF_SHARED | IRQF_DISABLED, "phantom", pht);
        if (retval) {
@@ -337,6 +354,7 @@ static void __devexit phantom_remove(struct pci_dev *pdev)
        cdev_del(&pht->cdev);
        iowrite32(0, pht->caddr + PHN_IRQCTL);
+        ioread32(pht->caddr + PHN_IRQCTL); /* PCI posting */
        free_irq(pdev->irq, pht);
        pci_iounmap(pdev, pht->oaddr);
@@ -358,6 +376,7 @@ static int phantom_suspend(struct pci_dev *pdev, pm_message_t state)
        struct phantom_device *dev = pci_get_drvdata(pdev);
        iowrite32(0, dev->caddr + PHN_IRQCTL);
+        ioread32(dev->caddr + PHN_IRQCTL); /* PCI posting */
        return 0;
 }
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index a7562f7fc0b3..540ff4bea54c 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -135,23 +135,6 @@ struct mmc_blk_request {
        struct mmc_data         data;
 };
-static int mmc_blk_prep_rq(struct mmc_queue *mq, struct request *req)
-{
-        struct mmc_blk_data *md = mq->data;
-        int stat = BLKPREP_OK;
-        /*
-         * If we have no device, we haven't finished initialising.
-         */
-        if (!md || !mq->card) {
-                printk(KERN_ERR "%s: killing request - no device/host\n",
-                       req->rq_disk->disk_name);
-                stat = BLKPREP_KILL;
-        }
-        return stat;
-}
 static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 {
        int err;
@@ -460,7 +443,6 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
        if (ret)
                goto err_putdisk;
-        md->queue.prep_fn = mmc_blk_prep_rq;
        md->queue.issue_fn = mmc_blk_issue_rq;
        md->queue.data = md;
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 2e77963db334..dd97bc798409 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -20,40 +20,21 @@
 #define MMC_QUEUE_SUSPENDED     (1 << 0)
 /*
- * Prepare a MMC request.  Essentially, this means passing the
+ * Prepare a MMC request. This just filters out odd stuff.
- * preparation off to the media driver.  The media driver will
- * create a mmc_io_request in req->special.
 */
 static int mmc_prep_request(struct request_queue *q, struct request *req)
 {
-        struct mmc_queue *mq = q->queuedata;
+        /*
-        int ret = BLKPREP_KILL;
+         * We only like normal block requests.
+         */
-        if (blk_special_request(req)) {
+        if (!blk_fs_request(req) && !blk_pc_request(req)) {
-                /*
-                 * Special commands already have the command
-                 * blocks already setup in req->special.
-                 */
-                BUG_ON(!req->special);
-                ret = BLKPREP_OK;
-        } else if (blk_fs_request(req) || blk_pc_request(req)) {
-                /*
-                 * Block I/O requests need translating according
-                 * to the protocol.
-                 */
-                ret = mq->prep_fn(mq, req);
-        } else {
-                /*
-                 * Everything else is invalid.
-                 */
                blk_dump_rq_flags(req, "MMC bad request");
+                return BLKPREP_KILL;
        }
-        if (ret == BLKPREP_OK)
+        req->cmd_flags |= REQ_DONTPREP;
-                req->cmd_flags |= REQ_DONTPREP;
-        return ret;
+        return BLKPREP_OK;
 }
 static int mmc_queue_thread(void *d)
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
index c9f139e764f6..1590b3f3f1f7 100644
--- a/drivers/mmc/card/queue.h
+++ b/drivers/mmc/card/queue.h
@@ -10,20 +10,12 @@ struct mmc_queue {
        struct semaphore        thread_sem;
        unsigned int            flags;
        struct request          *req;
-        int                     (*prep_fn)(struct mmc_queue *, struct request *);
        int                     (*issue_fn)(struct mmc_queue *, struct request *);
        void                    *data;
        struct request_queue    *queue;
        struct scatterlist      *sg;
 };
-struct mmc_io_request {
-        struct request          *rq;
-        int                     num;
-        struct mmc_command      selcmd;         /* mmc_queue private */
-        struct mmc_command      cmd[4];         /* max 4 commands */
-};
 extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *);
 extern void mmc_cleanup_queue(struct mmc_queue *);
 extern void mmc_queue_suspend(struct mmc_queue *);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c5baa197bc08..30fd479fea5e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2218,7 +2218,7 @@ config SK98LIN
 config VIA_VELOCITY
        tristate "VIA Velocity support"
-        depends on NET_PCI && PCI
+        depends on PCI
        select CRC32
        select CRC_CCITT
        select MII
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index 7284ccad0b91..4030274fe788 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -2,10 +2,8 @@
 # Arcnet configuration
 #
-menu "ARCnet devices"
+menuconfig ARCNET
        depends on NETDEVICES && (ISA || PCI)
-config ARCNET
        tristate "ARCnet support"
        ---help---
          If you have a network card of this type, say Y and check out the
@@ -25,9 +23,10 @@ config ARCNET
          <file:Documentation/networking/net-modules.txt>.  The module will
          be called arcnet.
+if ARCNET
 config ARCNET_1201
        tristate "Enable standard ARCNet packet format (RFC 1201)"
-        depends on ARCNET
        help
          This allows you to use RFC1201 with your ARCnet card via the virtual
          arc0 device.  You need to say Y here to communicate with
@@ -38,7 +37,6 @@ config ARCNET_1201
 config ARCNET_1051
        tristate "Enable old ARCNet packet format (RFC 1051)"
-        depends on ARCNET
        ---help---
          This allows you to use RFC1051 with your ARCnet card via the virtual
          arc0s device. You only need arc0s if you want to talk to ARCnet
@@ -53,7 +51,6 @@ config ARCNET_1051
 config ARCNET_RAW
        tristate "Enable raw mode packet interface"
-        depends on ARCNET
        help
          ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
          to work unless talking to a copy of the same Linux arcnet driver,
@@ -61,7 +58,6 @@ config ARCNET_RAW
 config ARCNET_CAP
        tristate "Enable CAP mode packet interface"
-        depends on ARCNET
        help
          ARCnet "cap mode" packet encapsulation. Used to get the hardware
          acknowledge back to userspace. After the initial protocol byte every
@@ -80,7 +76,6 @@ config ARCNET_CAP
 config ARCNET_COM90xx
        tristate "ARCnet COM90xx (normal) chipset driver"
-        depends on ARCNET
        help
          This is the chipset driver for the standard COM90xx cards. If you
          have always used the old ARCnet driver without knowing what type of
@@ -92,7 +87,6 @@ config ARCNET_COM90xx
 config ARCNET_COM90xxIO
        tristate "ARCnet COM90xx (IO mapped) chipset driver"
-        depends on ARCNET
        ---help---
          This is the chipset driver for the COM90xx cards, using them in
          IO-mapped mode instead of memory-mapped mode. This is slower than
@@ -105,7 +99,6 @@ config ARCNET_COM90xxIO
 config ARCNET_RIM_I
        tristate "ARCnet COM90xx (RIM I) chipset driver"
-        depends on ARCNET
        ---help---
          This is yet another chipset driver for the COM90xx cards, but this
          time only using memory-mapped mode, and no IO ports at all. This
@@ -118,7 +111,6 @@ config ARCNET_RIM_I
 config ARCNET_COM20020
        tristate "ARCnet COM20020 chipset driver"
-        depends on ARCNET
        help
          This is the driver for the new COM20020 chipset. It supports such
          things as promiscuous mode, so packet sniffing is possible, and
@@ -136,5 +128,4 @@ config ARCNET_COM20020_PCI
        tristate "Support for COM20020 on PCI"
        depends on ARCNET_COM20020 && PCI
-endmenu
+endif # ARCNET
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 4aec747d9e43..9fe3a38883ee 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -4919,7 +4919,10 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
        pci_cmd &= ~PCI_COMMAND_SERR;
        pci_cmd |= PCI_COMMAND_PARITY;
        pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
-        pci_set_mwi(pdev);
+        if (pci_set_mwi(pdev))
+                printk(KERN_WARNING PFX "Could enable MWI for %s\n",
+                       pci_name(pdev));
        /*
         * On some architectures, the default cache line size set
         * by pci_set_mwi reduces perforamnce.  We have to increase
diff --git a/drivers/net/chelsio/suni1x10gexp_regs.h b/drivers/net/chelsio/suni1x10gexp_regs.h
index 269d097dd927..d0f87d82566a 100644
--- a/drivers/net/chelsio/suni1x10gexp_regs.h
+++ b/drivers/net/chelsio/suni1x10gexp_regs.h
@@ -105,7 +105,7 @@
 #define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_LOW(filterId) (0x204A + mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId))
 #define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_MID(filterId) (0x204B + mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId))
 #define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_HIGH(filterId)(0x204C + mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId))
-#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID(filterId)      (0x2062 + mSUNI1x10GEXP_MAC_VID_FILTER_OFFSET(filterId)
+#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID(filterId)      (0x2062 + mSUNI1x10GEXP_MAC_VID_FILTER_OFFSET(filterId))
 #define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_0_LOW                     0x204A
 #define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_0_MID                     0x204B
 #define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_0_HIGH                    0x204C
diff --git a/drivers/net/declance.c b/drivers/net/declance.c
index 95d854e2295c..b2577f40124e 100644
--- a/drivers/net/declance.c
+++ b/drivers/net/declance.c
@@ -932,8 +932,6 @@ static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
        /* Kick the lance: transmit now */
        writereg(&ll->rdp, LE_C0_INEA | LE_C0_TDMD);
-        spin_unlock_irq(&lp->lock);
        dev->trans_start = jiffies;
        dev_kfree_skb(skb);
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 49be393e1c1d..cbc7febe9cdc 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1431,10 +1431,6 @@ e1000_open(struct net_device *netdev)
        /* From here on the code is the same as e1000_up() */
        clear_bit(__E1000_DOWN, &adapter->flags);
-#ifdef CONFIG_E1000_NAPI
-        netif_poll_enable(netdev);
-#endif
        e1000_irq_enable(adapter);
        /* fire a link status change interrupt to start the watchdog */
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 7a018027fcc0..4154fd000746 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -195,7 +195,7 @@ enum {
 #define NVREG_IRQ_TX_FORCED             0x0100
 #define NVREG_IRQ_RECOVER_ERROR         0x8000
 #define NVREG_IRQMASK_THROUGHPUT        0x00df
-#define NVREG_IRQMASK_CPU               0x0040
+#define NVREG_IRQMASK_CPU               0x0060
 #define NVREG_IRQ_TX_ALL                (NVREG_IRQ_TX_ERR|NVREG_IRQ_TX_OK|NVREG_IRQ_TX_FORCED)
 #define NVREG_IRQ_RX_ALL                (NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_RX_FORCED)
 #define NVREG_IRQ_OTHER                 (NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_RECOVER_ERROR)
diff --git a/drivers/net/meth.c b/drivers/net/meth.c
index 0343ea12b299..92b403bf38b0 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -8,15 +8,16 @@
 *      as published by the Free Software Foundation; either version
 *      2 of the License, or (at your option) any later version.
 */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h> /* printk() */
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/errno.h>  /* error codes */
+#include <linux/errno.h>
-#include <linux/types.h>  /* size_t */
+#include <linux/types.h>
-#include <linux/interrupt.h> /* mark_bh */
+#include <linux/interrupt.h>
 #include <linux/in.h>
 #include <linux/in6.h>
@@ -33,7 +34,6 @@
 #include <asm/io.h>
 #include <asm/scatterlist.h>
-#include <linux/dma-mapping.h>
 #include "meth.h"
@@ -51,8 +51,6 @@
 static const char *meth_str="SGI O2 Fast Ethernet";
-MODULE_AUTHOR("Ilya Volynets <ilya@theIlya.com>");
-MODULE_DESCRIPTION("SGI O2 Builtin Fast Ethernet driver");
 #define HAVE_TX_TIMEOUT
 /* The maximum time waited (in jiffies) before assuming a Tx failed. (400ms) */
@@ -784,15 +782,15 @@ static struct net_device_stats *meth_stats(struct net_device *dev)
 /*
 * The init function.
 */
-static struct net_device *meth_init(void)
+static int __init meth_probe(struct platform_device *pdev)
 {
        struct net_device *dev;
        struct meth_private *priv;
-        int ret;
+        int err;
        dev = alloc_etherdev(sizeof(struct meth_private));
        if (!dev)
-                return ERR_PTR(-ENOMEM);
+                return -ENOMEM;
        dev->open            = meth_open;
        dev->stop            = meth_release;
@@ -808,11 +806,12 @@ static struct net_device *meth_init(void)
        priv = netdev_priv(dev);
        spin_lock_init(&priv->meth_lock);
+        SET_NETDEV_DEV(dev, &pdev->dev);
-        ret = register_netdev(dev);
+        err = register_netdev(dev);
-        if (ret) {
+        if (err) {
                free_netdev(dev);
-                return ERR_PTR(ret);
+                return err;
        }
        printk(KERN_INFO "%s: SGI MACE Ethernet rev. %d\n",
@@ -820,21 +819,44 @@ static struct net_device *meth_init(void)
        return 0;
 }
-static struct net_device *meth_dev;
+static int __exit meth_remove(struct platform_device *pdev)
+{
+        struct net_device *dev = platform_get_drvdata(pdev);
+        unregister_netdev(dev);
+        free_netdev(dev);
+        platform_set_drvdata(pdev, NULL);
+        return 0;
+}
+static struct platform_driver meth_driver = {
+        .probe  = meth_probe,
+        .remove = __devexit_p(meth_remove),
+        .driver = {
+                .name   = "meth",
+        }
+};
 static int __init meth_init_module(void)
 {
-        meth_dev = meth_init();
+        int err;
-        if (IS_ERR(meth_dev))
-                return PTR_ERR(meth_dev);
+        err = platform_driver_register(&meth_driver);
-        return 0;
+        if (err)
+                printk(KERN_ERR "Driver registration failed\n");
+        return err;
 }
 static void __exit meth_exit_module(void)
 {
-        unregister_netdev(meth_dev);
+        platform_driver_unregister(&meth_driver);
-        free_netdev(meth_dev);
 }
 module_init(meth_init_module);
 module_exit(meth_exit_module);
+MODULE_AUTHOR("Ilya Volynets <ilya@theIlya.com>");
+MODULE_DESCRIPTION("SGI O2 Builtin Fast Ethernet driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
index 68c99b4c5255..bb966911a137 100644
--- a/drivers/net/phy/fixed.c
+++ b/drivers/net/phy/fixed.c
@@ -89,6 +89,7 @@ EXPORT_SYMBOL(fixed_mdio_set_link_update);
 /*-----------------------------------------------------------------------------
 *  This is used for updating internal mii regs from the status
 *-----------------------------------------------------------------------------*/
+#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX)
 static int fixed_mdio_update_regs(struct fixed_info *fixed)
 {
        u16 *regs = fixed->regs;
@@ -165,6 +166,7 @@ static int fixed_mii_reset(struct mii_bus *bus)
        /*nothing here - no way/need to reset it*/
        return 0;
 }
+#endif
 static int fixed_config_aneg(struct phy_device *phydev)
 {
@@ -194,6 +196,7 @@ static struct phy_driver fixed_mdio_driver = {
 * number is used to create multiple fixed PHYs, so that several devices can
 * utilize them simultaneously.
 *-----------------------------------------------------------------------------*/
+#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX)
 static int fixed_mdio_register_device(int number, int speed, int duplex)
 {
        struct mii_bus *new_bus;
@@ -301,6 +304,7 @@ device_create_fail:
        return err;
 }
+#endif
 MODULE_DESCRIPTION("Fixed PHY device & driver for PAL");
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index c3964c3d89d9..ef84d7c757a0 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -1014,12 +1014,12 @@ spider_net_pass_skb_up(struct spider_net_descr *descr,
                 */
        }
-        /* pass skb up to stack */
-        netif_receive_skb(skb);
        /* update netdevice statistics */
        card->netdev_stats.rx_packets++;
        card->netdev_stats.rx_bytes += skb->len;
+        /* pass skb up to stack */
+        netif_receive_skb(skb);
 }
 #ifdef DEBUG
diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
index 99c4c1922f19..e6b2e06493e7 100644
--- a/drivers/net/tokenring/Kconfig
+++ b/drivers/net/tokenring/Kconfig
@@ -2,12 +2,10 @@
 # Token Ring driver configuration
 #
-menu "Token Ring devices"
-        depends on NETDEVICES && !UML
 # So far, we only have PCI, ISA, and MCA token ring devices
-config TR
+menuconfig TR
        bool "Token Ring driver support"
+        depends on NETDEVICES && !UML
        depends on (PCI || ISA || MCA || CCW)
        select LLC
        help
@@ -20,9 +18,11 @@ config TR
          from <http://www.tldp.org/docs.html#howto>. Most people can
          say N here.
+if TR
 config IBMTR
        tristate "IBM Tropic chipset based adapter support"
-        depends on TR && (ISA || MCA)
+        depends on ISA || MCA
        ---help---
          This is support for all IBM Token Ring cards that don't use DMA. If
          you have such a beast, say Y and read the Token-Ring mini-HOWTO,
@@ -36,7 +36,7 @@ config IBMTR
 config IBMOL
        tristate "IBM Olympic chipset PCI adapter support"
-        depends on TR && PCI
+        depends on PCI
        ---help---
          This is support for all non-Lanstreamer IBM PCI Token Ring Cards.
          Specifically this is all IBM PCI, PCI Wake On Lan, PCI II, PCI II
@@ -54,7 +54,7 @@ config IBMOL
 config IBMLS
        tristate "IBM Lanstreamer chipset PCI adapter support"
-        depends on TR && PCI && !64BIT
+        depends on PCI && !64BIT
        help
          This is support for IBM Lanstreamer PCI Token Ring Cards.
@@ -66,7 +66,7 @@ config IBMLS
 config 3C359
        tristate "3Com 3C359 Token Link Velocity XL adapter support"
-        depends on TR && PCI
+        depends on PCI
        ---help---
          This is support for the 3Com PCI Velocity XL cards, specifically
          the 3Com 3C359, please note this is not for the 3C339 cards, you
@@ -84,7 +84,7 @@ config 3C359
 config TMS380TR
        tristate "Generic TMS380 Token Ring ISA/PCI adapter support"
-        depends on TR && (PCI || ISA && ISA_DMA_API || MCA)
+        depends on PCI || ISA && ISA_DMA_API || MCA
        select FW_LOADER
        ---help---
          This driver provides generic support for token ring adapters
@@ -108,7 +108,7 @@ config TMS380TR
 config TMSPCI
        tristate "Generic TMS380 PCI support"
-        depends on TR && TMS380TR && PCI
+        depends on TMS380TR && PCI
        ---help---
          This tms380 module supports generic TMS380-based PCI cards.
@@ -123,7 +123,7 @@ config TMSPCI
 config SKISA
        tristate "SysKonnect TR4/16 ISA support"
-        depends on TR && TMS380TR && ISA
+        depends on TMS380TR && ISA
        help
          This tms380 module supports SysKonnect TR4/16 ISA cards.
@@ -135,7 +135,7 @@ config SKISA
 config PROTEON
        tristate "Proteon ISA support"
-        depends on TR && TMS380TR && ISA
+        depends on TMS380TR && ISA
        help
          This tms380 module supports Proteon ISA cards.
@@ -148,7 +148,7 @@ config PROTEON
 config ABYSS
        tristate "Madge Smart 16/4 PCI Mk2 support"
-        depends on TR && TMS380TR && PCI
+        depends on TMS380TR && PCI
        help
          This tms380 module supports the Madge Smart 16/4 PCI Mk2
          cards (51-02).
@@ -158,7 +158,7 @@ config ABYSS
 config MADGEMC
        tristate "Madge Smart 16/4 Ringnode MicroChannel"
-        depends on TR && TMS380TR && MCA
+        depends on TMS380TR && MCA
        help
          This tms380 module supports the Madge Smart 16/4 MC16 and MC32
          MicroChannel adapters.
@@ -168,7 +168,7 @@ config MADGEMC
 config SMCTR
        tristate "SMC ISA/MCA adapter support"
-        depends on TR && (ISA || MCA_LEGACY) && (BROKEN || !64BIT)
+        depends on (ISA || MCA_LEGACY) && (BROKEN || !64BIT)
        ---help---
          This is support for the ISA and MCA SMC Token Ring cards,
          specifically SMC TokenCard Elite (8115T) and SMC TokenCard Elite/A
@@ -182,5 +182,4 @@ config SMCTR
          To compile this driver as a module, choose M here: the module will be
          called smctr.
-endmenu
+endif # TR
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index c2ccbd098f53..18b731bb4da1 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -23,11 +23,8 @@
 #include <linux/skbuff.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
-#include <linux/ethtool.h>
-#include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/fsl_devices.h>
-#include <linux/ethtool.h>
 #include <linux/mii.h>
 #include <linux/phy.h>
 #include <linux/workqueue.h>
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index f96966d4bcc2..7bcb82f50cf7 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -260,8 +260,6 @@ static struct of_device_id uec_mdio_match[] = {
        {},
 };
-MODULE_DEVICE_TABLE(of, uec_mdio_match);
 static struct of_platform_driver uec_mdio_driver = {
        .name   = DRV_NAME,
        .probe  = uec_mdio_probe,
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index d5ef97bc4d01..6d95cacd5284 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1458,6 +1458,10 @@ static const struct usb_device_id	products [] = {
        // IO-DATA ETG-US2
        USB_DEVICE (0x04bb, 0x0930),
        .driver_info = (unsigned long) &ax88178_info,
+}, {
+        // Belkin F5D5055
+        USB_DEVICE(0x050d, 0x5055),
+        .driver_info = (unsigned long) &ax88178_info,
 },
        { },            // END
 };
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 5a21f06bf8a5..675ac99a79c6 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -91,6 +91,22 @@ int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
                                "CDC descriptors on config\n");
        }
+        /* Maybe CDC descriptors are after the endpoint?  This bug has
+         * been seen on some 2Wire Inc RNDIS-ish products.
+         */
+        if (len == 0) {
+                struct usb_host_endpoint        *hep;
+                hep = intf->cur_altsetting->endpoint;
+                if (hep) {
+                        buf = hep->extra;
+                        len = hep->extralen;
+                }
+                if (len)
+                        dev_dbg(&intf->dev,
+                                "CDC descriptors on endpoint\n");
+        }
        /* this assumes that if there's a non-RNDIS vendor variant
         * of cdc-acm, it'll fail RNDIS requests cleanly.
         */
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 980e4aaa97aa..cd991a0f75bb 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -515,6 +515,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
                dev_err(&intf->dev,
                        "dev can't take %u byte packets (max %u)\n",
                        dev->hard_mtu, tmp);
+                retval = -EINVAL;
                goto fail_and_release;
        }
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index f9cd42d058b0..5b16d9a1269a 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1252,20 +1252,23 @@ EXPORT_SYMBOL_GPL(usbnet_probe);
 /*-------------------------------------------------------------------------*/
-/* FIXME these suspend/resume methods assume non-CDC style
+/*
- * devices, with only one interface.
+ * suspend the whole driver as soon as the first interface is suspended
+ * resume only when the last interface is resumed
 */
 int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
 {
        struct usbnet           *dev = usb_get_intfdata(intf);
-        /* accelerate emptying of the rx and queues, to avoid
+        if (!dev->suspend_count++) {
-         * having everything error out.
+                /* accelerate emptying of the rx and queues, to avoid
-         */
+                 * having everything error out.
-        netif_device_detach (dev->net);
+                 */
-        (void) unlink_urbs (dev, &dev->rxq);
+                netif_device_detach (dev->net);
-        (void) unlink_urbs (dev, &dev->txq);
+                (void) unlink_urbs (dev, &dev->rxq);
+                (void) unlink_urbs (dev, &dev->txq);
+        }
        return 0;
 }
 EXPORT_SYMBOL_GPL(usbnet_suspend);
@@ -1274,8 +1277,10 @@ int usbnet_resume (struct usb_interface *intf)
 {
        struct usbnet           *dev = usb_get_intfdata(intf);
-        netif_device_attach (dev->net);
+        if (!--dev->suspend_count) {
-        tasklet_schedule (&dev->bh);
+                netif_device_attach (dev->net);
+                tasklet_schedule (&dev->bh);
+        }
        return 0;
 }
 EXPORT_SYMBOL_GPL(usbnet_resume);
diff --git a/drivers/net/usb/usbnet.h b/drivers/net/usb/usbnet.h
index 82db5a8e528e..a3f8b9e7bc00 100644
--- a/drivers/net/usb/usbnet.h
+++ b/drivers/net/usb/usbnet.h
@@ -32,6 +32,7 @@ struct usbnet {
        const char              *driver_name;
        wait_queue_head_t       *wait;
        struct mutex            phy_mutex;
+        unsigned char           suspend_count;
        /* i/o info: pipes etc */
        unsigned                in, out;
diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
index 606bdd002be7..dfe27642322c 100644
--- a/drivers/net/wireless/libertas/decl.h
+++ b/drivers/net/wireless/libertas/decl.h
@@ -46,7 +46,7 @@ u32 libertas_index_to_data_rate(u8 index);
 u8 libertas_data_rate_to_index(u32 rate);
 void libertas_get_fwversion(wlan_adapter * adapter, char *fwversion, int maxlen);
-int libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb);
+void libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb);
 /** The proc fs interface */
 int libertas_process_rx_command(wlan_private * priv);
diff --git a/drivers/net/wireless/libertas/fw.c b/drivers/net/wireless/libertas/fw.c
index 441123c85e62..5c63c9b1659c 100644
--- a/drivers/net/wireless/libertas/fw.c
+++ b/drivers/net/wireless/libertas/fw.c
@@ -333,18 +333,22 @@ static void command_timer_fn(unsigned long data)
        unsigned long flags;
        ptempnode = adapter->cur_cmd;
+        if (ptempnode == NULL) {
+                lbs_pr_debug(1, "PTempnode Empty\n");
+                return;
+        }
        cmd = (struct cmd_ds_command *)ptempnode->bufvirtualaddr;
+        if (!cmd) {
+                lbs_pr_debug(1, "cmd is NULL\n");
+                return;
+        }
        lbs_pr_info("command_timer_fn fired (%x)\n", cmd->command);
        if (!adapter->fw_ready)
                return;
-        if (ptempnode == NULL) {
-                lbs_pr_debug(1, "PTempnode Empty\n");
-                return;
-        }
        spin_lock_irqsave(&adapter->driver_lock, flags);
        adapter->cur_cmd = NULL;
        spin_unlock_irqrestore(&adapter->driver_lock, flags);
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index d17924f764e5..96619a32951b 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -136,7 +136,7 @@ static void wlan_compute_rssi(wlan_private * priv, struct rxpd *p_rx_pd)
        LEAVE();
 }
-int libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb)
+void libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb)
 {
        lbs_pr_debug(1, "skb->data=%p\n", skb->data);
@@ -148,8 +148,6 @@ int libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb)
        skb->ip_summed = CHECKSUM_UNNECESSARY;
        netif_rx(skb);
-        return 0;
 }
 /**
@@ -269,15 +267,11 @@ int libertas_process_rxed_packet(wlan_private * priv, struct sk_buff *skb)
        wlan_compute_rssi(priv, p_rx_pd);
        lbs_pr_debug(1, "RX Data: size of actual packet = %d\n", skb->len);
-        if (libertas_upload_rx_packet(priv, skb)) {
-                lbs_pr_debug(1, "RX error: libertas_upload_rx_packet"
-                       " returns failure\n");
-                ret = -1;
-                goto done;
-        }
        priv->stats.rx_bytes += skb->len;
        priv->stats.rx_packets++;
+        libertas_upload_rx_packet(priv, skb);
        ret = 0;
 done:
        LEAVE();
@@ -438,22 +432,14 @@ static int process_rxed_802_11_packet(wlan_private * priv, struct sk_buff *skb)
        wlan_compute_rssi(priv, prxpd);
        lbs_pr_debug(1, "RX Data: size of actual packet = %d\n", skb->len);
-        if (libertas_upload_rx_packet(priv, skb)) {
-                lbs_pr_debug(1, "RX error: libertas_upload_rx_packet "
-                        "returns failure\n");
-                ret = -1;
-                goto done;
-        }
        priv->stats.rx_bytes += skb->len;
        priv->stats.rx_packets++;
+        libertas_upload_rx_packet(priv, skb);
        ret = 0;
 done:
        LEAVE();
-        skb->protocol = __constant_htons(0x0019);       /* ETH_P_80211_RAW */
        return (ret);
 }
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 052359fc41ee..11f36bef3057 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -329,8 +329,8 @@ static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps)
        int ret = 0;
 #if defined(CONFIG_PPC_MERGE)
-        cdm = mpc52xx_find_and_map("mpc52xx-cdm");
+        cdm = mpc52xx_find_and_map("mpc5200-cdm");
-        gpio = mpc52xx_find_and_map("mpc52xx-gpio");
+        gpio = mpc52xx_find_and_map("mpc5200-gpio");
 #else
        cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
        gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
@@ -445,9 +445,6 @@ static int __init mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
        struct spi_master *master;
        int ret;
-        if (pdata == NULL)
-                return -ENODEV;
        master = spi_alloc_master(dev, sizeof *mps);
        if (master == NULL)
                return -ENOMEM;
@@ -594,17 +591,17 @@ static int __init mpc52xx_psc_spi_of_probe(struct of_device *op,
        }
        regaddr64 = of_translate_address(op->node, regaddr_p);
+        /* get PSC id (1..6, used by port_config) */
        if (op->dev.platform_data == NULL) {
-                struct device_node *np;
+                const u32 *psc_nump;
-                int i = 0;
-                for_each_node_by_type(np, "spi") {
+                psc_nump = of_get_property(op->node, "cell-index", NULL);
-                        if (of_find_device_by_node(np) == op) {
+                if (!psc_nump || *psc_nump > 5) {
-                                id = i;
+                        printk(KERN_ERR "mpc52xx_psc_spi: Device node %s has invalid "
-                                break;
+                                        "cell-index property\n", op->node->full_name);
-                        }
+                        return -EINVAL;
-                        i++;
                }
+                id = *psc_nump + 1;
        }
        return mpc52xx_psc_spi_do_probe(&op->dev, (u32)regaddr64, (u32)size64,
@@ -617,7 +614,7 @@ static int __exit mpc52xx_psc_spi_of_remove(struct of_device *op)
 }
 static struct of_device_id mpc52xx_psc_spi_of_match[] = {
-        { .type = "spi", .compatible = "mpc52xx-psc-spi", },
+        { .type = "spi", .compatible = "mpc5200-psc-spi", },
        {},
 };
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index 96f62b2df300..95183e1df525 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -358,11 +358,11 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
        switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
        case SPI_MODE_0:
        case SPI_MODE_3:
-                flags |= UWIRE_WRITE_RISING_EDGE | UWIRE_READ_FALLING_EDGE;
+                flags |= UWIRE_WRITE_FALLING_EDGE | UWIRE_READ_RISING_EDGE;
                break;
        case SPI_MODE_1:
        case SPI_MODE_2:
-                flags |= UWIRE_WRITE_FALLING_EDGE | UWIRE_READ_RISING_EDGE;
+                flags |= UWIRE_WRITE_RISING_EDGE | UWIRE_READ_FALLING_EDGE;
                break;
        }
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 225d6b2f82dd..d04242aee40d 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -168,6 +168,12 @@ static int spidev_message(struct spidev_data *spidev,
                        n--, k_tmp++, u_tmp++) {
                k_tmp->len = u_tmp->len;
+                total += k_tmp->len;
+                if (total > bufsiz) {
+                        status = -EMSGSIZE;
+                        goto done;
+                }
                if (u_tmp->rx_buf) {
                        k_tmp->rx_buf = buf;
                        if (!access_ok(VERIFY_WRITE, u_tmp->rx_buf, u_tmp->len))
@@ -179,12 +185,6 @@ static int spidev_message(struct spidev_data *spidev,
                                        u_tmp->len))
                                goto done;
                }
-                total += k_tmp->len;
-                if (total > bufsiz) {
-                        status = -EMSGSIZE;
-                        goto done;
-                }
                buf += k_tmp->len;
                k_tmp->cs_change = !!u_tmp->cs_change;
@@ -364,6 +364,7 @@ spidev_ioctl(struct inode *inode, struct file *filp,
                        break;
                }
                if (__copy_from_user(ioc, (void __user *)arg, tmp)) {
+                        kfree(ioc);
                        retval = -EFAULT;
                        break;
                }
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 15e740e3a5c4..7b1edfe46b28 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -1003,7 +1003,7 @@ abort:
                                usblp->writebuf, usblp->writeurb->transfer_dma);
                if (usblp->readbuf)
                        usb_buffer_free (usblp->dev, USBLP_BUF_SIZE,
-                                usblp->readbuf, usblp->writeurb->transfer_dma);
+                                usblp->readbuf, usblp->readurb->transfer_dma);
                kfree(usblp->statusbuf);
                kfree(usblp->device_id_string);
                usb_free_urb(usblp->writeurb);
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index bfb3731d42db..2d4fd530e5e4 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -185,10 +185,12 @@ static int usb_parse_interface(struct device *ddev, int cfgno,
                num_ep = USB_MAXENDPOINTS;
        }
-        len = sizeof(struct usb_host_endpoint) * num_ep;
+        if (num_ep > 0) {       /* Can't allocate 0 bytes */
-        alt->endpoint = kzalloc(len, GFP_KERNEL);
+                len = sizeof(struct usb_host_endpoint) * num_ep;
-        if (!alt->endpoint)
+                alt->endpoint = kzalloc(len, GFP_KERNEL);
-                return -ENOMEM;
+                if (!alt->endpoint)
+                        return -ENOMEM;
+        }
        /* Parse all the endpoint descriptors */
        n = 0;
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index b9f7f90aef82..2619986e5300 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -983,7 +983,10 @@ static int autosuspend_check(struct usb_device *udev)
 #else
-#define autosuspend_check(udev)         0
+static inline int autosuspend_check(struct usb_device *udev)
+{
+        return 0;
+}
 #endif  /* CONFIG_USB_SUSPEND */
@@ -1041,7 +1044,6 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
                if (status < 0)
                        goto done;
        }
-        cancel_delayed_work(&udev->autosuspend);
        /* Suspend all the interfaces and then udev itself */
        if (udev->actconfig) {
@@ -1062,9 +1064,16 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
                        usb_resume_interface(intf);
                }
+                /* Try another autosuspend when the interfaces aren't busy */
+                if (udev->auto_pm)
+                        autosuspend_check(udev);
        /* If the suspend succeeded, propagate it up the tree */
-        } else if (parent)
+        } else {
-                usb_autosuspend_device(parent);
+                cancel_delayed_work(&udev->autosuspend);
+                if (parent)
+                        usb_autosuspend_device(parent);
+        }
 done:
        // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
@@ -1475,6 +1484,7 @@ int usb_external_resume_device(struct usb_device *udev)
        usb_pm_lock(udev);
        udev->auto_pm = 0;
        status = usb_resume_both(udev);
+        udev->last_busy = jiffies;
        usb_pm_unlock(udev);
        /* Now that the device is awake, we can start trying to autosuspend
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 40cf882293e6..e277258df382 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1018,8 +1018,8 @@ done:
                atomic_dec (&urb->use_count);
                if (urb->reject)
                        wake_up (&usb_kill_urb_queue);
-                usb_put_urb (urb);
                usbmon_urb_submit_error(&hcd->self, urb, status);
+                usb_put_urb (urb);
        }
        return status;
 }
@@ -1175,10 +1175,6 @@ void usb_hcd_endpoint_disable (struct usb_device *udev,
        struct urb              *urb;
        hcd = bus_to_hcd(udev->bus);
-        WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT &&
-                        udev->state != USB_STATE_NOTATTACHED);
        local_irq_disable ();
        /* ep is already gone from udev->ep_{in,out}[]; no more submits */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index f6b74a678de5..caaa46f2dec7 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2201,14 +2201,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
                                continue;
                        }
-                        /* Use a short timeout the first time through,
+                        /* Retry on all errors; some devices are flakey.
-                         * so that recalcitrant full-speed devices with
+                         * 255 is for WUSB devices, we actually need to use
-                         * 8- or 16-byte ep0-maxpackets won't slow things
+                         * 512 (WUSB1.0[4.8.1]).
-                         * down tremendously by NAKing the unexpectedly
-                         * early status stage.  Also, retry on all errors;
-                         * some devices are flakey.
-                         * 255 is for WUSB devices, we actually need to use 512.
-                         * WUSB1.0[4.8.1].
                         */
                        for (j = 0; j < 3; ++j) {
                                buf->bMaxPacketSize0 = 0;
@@ -2216,7 +2211,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
                                        USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
                                        USB_DT_DEVICE << 8, 0,
                                        buf, GET_DESCRIPTOR_BUFSIZE,
-                                        (i ? USB_CTRL_GET_TIMEOUT : 1000));
+                                        USB_CTRL_GET_TIMEOUT);
                                switch (buf->bMaxPacketSize0) {
                                case 8: case 16: case 32: case 64: case 255:
                                        if (buf->bDescriptorType ==
@@ -2426,10 +2421,10 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
        if (portchange & USB_PORT_STAT_C_CONNECTION) {
                status = hub_port_debounce(hub, port1);
-                if (status < 0 && printk_ratelimit()) {
+                if (status < 0) {
-                        dev_err (hub_dev,
+                        if (printk_ratelimit())
-                                "connect-debounce failed, port %d disabled\n",
+                                dev_err (hub_dev, "connect-debounce failed, "
-                                port1);
+                                                "port %d disabled\n", port1);
                        goto done;
                }
                portstatus = status;
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b7434787db5f..f9fed34bf7d8 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -221,15 +221,10 @@ int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
        if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
                        USB_ENDPOINT_XFER_INT) {
-                int interval;
-                if (usb_dev->speed == USB_SPEED_HIGH)
-                        interval = 1 << min(15, ep->desc.bInterval - 1);
-                else
-                        interval = ep->desc.bInterval;
                pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
                usb_fill_int_urb(urb, usb_dev, pipe, data, len,
-                                usb_api_blocking_completion, NULL, interval);
+                                usb_api_blocking_completion, NULL,
+                                ep->desc.bInterval);
        } else
                usb_fill_bulk_urb(urb, usb_dev, pipe, data, len,
                                usb_api_blocking_completion, NULL);
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index e7c982377488..be37c863fdfb 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -232,12 +232,15 @@ set_level(struct device *dev, struct device_attribute *attr,
        int len = count;
        char *cp;
        int rc = 0;
+        int old_autosuspend_disabled, old_autoresume_disabled;
        cp = memchr(buf, '\n', count);
        if (cp)
                len = cp - buf;
        usb_lock_device(udev);
+        old_autosuspend_disabled = udev->autosuspend_disabled;
+        old_autoresume_disabled = udev->autoresume_disabled;
        /* Setting the flags without calling usb_pm_lock is a subject to
         * races, but who cares...
@@ -263,6 +266,10 @@ set_level(struct device *dev, struct device_attribute *attr,
        } else
                rc = -EINVAL;
+        if (rc) {
+                udev->autosuspend_disabled = old_autosuspend_disabled;
+                udev->autoresume_disabled = old_autoresume_disabled;
+        }
        usb_unlock_device(udev);
        return (rc < 0 ? rc : count);
 }
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 18ddc5e67e39..80627b6a2bf9 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -205,7 +205,11 @@ struct device_type usb_device_type = {
 static int ksuspend_usb_init(void)
 {
-        ksuspend_usb_wq = create_singlethread_workqueue("ksuspend_usbd");
+        /* This workqueue is supposed to be both freezable and
+         * singlethreaded.  Its job doesn't justify running on more
+         * than one CPU.
+         */
+        ksuspend_usb_wq = create_freezeable_workqueue("ksuspend_usbd");
        if (!ksuspend_usb_wq)
                return -ENOMEM;
        return 0;
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 157054ea3978..3ca2b3159f00 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -228,13 +228,15 @@ static int dr_controller_setup(struct fsl_udc *udc)
        /* Config PHY interface */
        portctrl = fsl_readl(&dr_regs->portsc1);
-        portctrl &= ~PORTSCX_PHY_TYPE_SEL;
+        portctrl &= ~(PORTSCX_PHY_TYPE_SEL & PORTSCX_PORT_WIDTH);
        switch (udc->phy_mode) {
        case FSL_USB2_PHY_ULPI:
                portctrl |= PORTSCX_PTS_ULPI;
                break;
-        case FSL_USB2_PHY_UTMI:
        case FSL_USB2_PHY_UTMI_WIDE:
+                portctrl |= PORTSCX_PTW_16BIT;
+                /* fall through */
+        case FSL_USB2_PHY_UTMI:
                portctrl |= PORTSCX_PTS_UTMI;
                break;
        case FSL_USB2_PHY_SERIAL:
@@ -625,7 +627,7 @@ static void fsl_free_buffer(struct usb_ep *_ep, void *buf,
        struct fsl_ep *ep;
        if (!_ep)
-                return NULL;
+                return;
        ep = container_of(_ep, struct fsl_ep, ep);
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index a52480505f78..c7a7c590426f 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -193,6 +193,19 @@ static void mpc83xx_usb_setup(struct usb_hcd *hcd)
        out_be32(non_ehci + FSL_SOC_USB_CTRL, 0x00000004);
        out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0000001b);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+        /*
+         * Turn on cache snooping hardware, since some PowerPC platforms
+         * wholly rely on hardware to deal with cache coherent
+         */
+        /* Setup Snooping for all the 4GB space */
+        /* SNOOP1 starts from 0x0, size 2G */
+        out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
+        /* SNOOP2 starts from 0x80000000, size 2G */
+        out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
+#endif
        if (pdata->operating_mode == FSL_USB2_DR_HOST)
                mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index f28736a917e4..b5e59db53347 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -34,4 +34,5 @@
 #define FSL_SOC_USB_PRICTRL     0x40c   /* NOTE: big-endian */
 #define FSL_SOC_USB_SICTRL      0x410   /* NOTE: big-endian */
 #define FSL_SOC_USB_CTRL        0x500   /* NOTE: big-endian */
+#define SNOOP_SIZE_2GB          0x1e
 #endif                          /* _EHCI_FSL_H */
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 79705609fd0c..ca62cb583221 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -137,7 +137,7 @@ static const struct pci_device_id ohci_pci_quirks[] = {
                /* Toshiba portege 4000 */
                .vendor         = PCI_VENDOR_ID_AL,
                .device         = 0x5237,
-                .subvendor      = PCI_VENDOR_ID_TOSHIBA_2,
+                .subvendor      = PCI_VENDOR_ID_TOSHIBA,
                .subdevice      = 0x0004,
                .driver_data    = (unsigned long) broken_suspend,
        },
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 20861650905e..c225159ca3d3 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -44,6 +44,7 @@
 #define EHCI_USBSTS             4               /* status register */
 #define EHCI_USBSTS_HALTED      (1 << 12)       /* HCHalted bit */
 #define EHCI_USBINTR            8               /* interrupt register */
+#define EHCI_CONFIGFLAG         0x40            /* configured flag register */
 #define EHCI_USBLEGSUP          0               /* legacy support register */
 #define EHCI_USBLEGSUP_BIOS     (1 << 16)       /* BIOS semaphore */
 #define EHCI_USBLEGSUP_OS       (1 << 24)       /* OS semaphore */
@@ -216,6 +217,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
        u32     hcc_params, val;
        u8      offset, cap_length;
        int     count = 256/4;
+        int     tried_handoff = 0;
        if (!mmio_resource_enabled(pdev, 0))
                return;
@@ -273,6 +275,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
                         */
                        msec = 5000;
                        while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
+                                tried_handoff = 1;
                                msleep(10);
                                msec -= 10;
                                pci_read_config_dword(pdev, offset, &cap);
@@ -292,6 +295,12 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
                        pci_write_config_dword(pdev,
                                        offset + EHCI_USBLEGCTLSTS,
                                        0);
+                        /* If the BIOS ever owned the controller then we
+                         * can't expect any power sessions to remain intact.
+                         */
+                        if (tried_handoff)
+                                writel(0, op_reg_base + EHCI_CONFIGFLAG);
                        break;
                case 0:                 /* illegal reserved capability */
                        cap = 0;
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index ff0dba01f1c7..e98df2ee9901 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -57,6 +57,13 @@
 #include <asm/system.h>
 #include <asm/byteorder.h>
 #include "../core/hcd.h"
+        /* FIXME ohci.h is ONLY for internal use by the OHCI driver.
+         * If you're going to try stuff like this, you need to split
+         * out shareable stuff (register declarations?) into its own
+         * file, maybe name <linux/usb/ohci.h>
+         */
 #include "ohci.h"
 #define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
 #define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | \
@@ -173,11 +180,6 @@ struct u132_ring {
        struct u132_endp *curr_endp;
        struct delayed_work scheduler;
 };
-#define OHCI_QUIRK_AMD756 0x01
-#define OHCI_QUIRK_SUPERIO 0x02
-#define OHCI_QUIRK_INITRESET 0x04
-#define OHCI_BIG_ENDIAN 0x08
-#define OHCI_QUIRK_ZFMICRO 0x10
 struct u132 {
        struct kref kref;
        struct list_head u132_list;
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
index 88fb56d5db8f..cac1500cba62 100644
--- a/drivers/usb/misc/auerswald.c
+++ b/drivers/usb/misc/auerswald.c
@@ -1822,16 +1822,10 @@ static int auerchar_release (struct inode *inode, struct file *file)
        pauerswald_t cp;
        dbg("release");
-        /* get the mutexes */
+        down(&ccp->mutex);
-        if (down_interruptible (&ccp->mutex)) {
-                return -ERESTARTSYS;
-        }
        cp = ccp->auerdev;
        if (cp) {
-                if (down_interruptible (&cp->mutex)) {
+                down(&cp->mutex);
-                        up (&ccp->mutex);
-                        return -ERESTARTSYS;
-                }
                /* remove an open service */
                auerswald_removeservice (cp, &ccp->scontext);
                /* detach from device */
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index e2172e5cf152..e0f122e131d7 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -73,6 +73,13 @@ static struct list_head ftdi_static_list;
 #include "usb_u132.h"
 #include <asm/io.h>
 #include "../core/hcd.h"
+        /* FIXME ohci.h is ONLY for internal use by the OHCI driver.
+         * If you're going to try stuff like this, you need to split
+         * out shareable stuff (register declarations?) into its own
+         * file, maybe name <linux/usb/ohci.h>
+         */
 #include "../host/ohci.h"
 /* Define these values to match your devices*/
 #define USB_FTDI_ELAN_VENDOR_ID 0x0403
@@ -2300,10 +2307,7 @@ static int ftdi_elan_checkingPCI(struct usb_ftdi *ftdi)
        offsetof(struct ohci_regs, member), 0, data);
 #define ftdi_write_pcimem(ftdi, member, data) ftdi_elan_write_pcimem(ftdi, \
        offsetof(struct ohci_regs, member), 0, data);
-#define OHCI_QUIRK_AMD756 0x01
-#define OHCI_QUIRK_SUPERIO 0x02
-#define OHCI_QUIRK_INITRESET 0x04
-#define OHCI_BIG_ENDIAN 0x08
 #define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
 #define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | \
        OHCI_INTR_WDH)
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 11555bde655b..7bad49404762 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -165,6 +165,8 @@ struct ld_usb {
        size_t                  interrupt_in_endpoint_size;
        int                     interrupt_in_running;
        int                     interrupt_in_done;
+        int                     buffer_overflow;
+        spinlock_t              rbsl;
        char*                   interrupt_out_buffer;
        struct usb_endpoint_descriptor* interrupt_out_endpoint;
@@ -230,10 +232,12 @@ static void ld_usb_interrupt_in_callback(struct urb *urb)
                } else {
                        dbg_info(&dev->intf->dev, "%s: nonzero status received: %d\n",
                                 __FUNCTION__, urb->status);
+                        spin_lock(&dev->rbsl);
                        goto resubmit; /* maybe we can recover */
                }
        }
+        spin_lock(&dev->rbsl);
        if (urb->actual_length > 0) {
                next_ring_head = (dev->ring_head+1) % ring_buffer_size;
                if (next_ring_head != dev->ring_tail) {
@@ -244,21 +248,25 @@ static void ld_usb_interrupt_in_callback(struct urb *urb)
                        dev->ring_head = next_ring_head;
                        dbg_info(&dev->intf->dev, "%s: received %d bytes\n",
                                 __FUNCTION__, urb->actual_length);
-                } else
+                } else {
                        dev_warn(&dev->intf->dev,
                                 "Ring buffer overflow, %d bytes dropped\n",
                                 urb->actual_length);
+                        dev->buffer_overflow = 1;
+                }
        }
 resubmit:
        /* resubmit if we're still running */
-        if (dev->interrupt_in_running && dev->intf) {
+        if (dev->interrupt_in_running && !dev->buffer_overflow && dev->intf) {
                retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC);
-                if (retval)
+                if (retval) {
                        dev_err(&dev->intf->dev,
                                "usb_submit_urb failed (%d)\n", retval);
+                        dev->buffer_overflow = 1;
+                }
        }
+        spin_unlock(&dev->rbsl);
 exit:
        dev->interrupt_in_done = 1;
        wake_up_interruptible(&dev->read_wait);
@@ -330,6 +338,7 @@ static int ld_usb_open(struct inode *inode, struct file *file)
        /* initialize in direction */
        dev->ring_head = 0;
        dev->ring_tail = 0;
+        dev->buffer_overflow = 0;
        usb_fill_int_urb(dev->interrupt_in_urb,
                         interface_to_usbdev(interface),
                         usb_rcvintpipe(interface_to_usbdev(interface),
@@ -439,6 +448,7 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
        size_t *actual_buffer;
        size_t bytes_to_read;
        int retval = 0;
+        int rv;
        dev = file->private_data;
@@ -460,7 +470,10 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
        }
        /* wait for data */
+        spin_lock_irq(&dev->rbsl);
        if (dev->ring_head == dev->ring_tail) {
+                dev->interrupt_in_done = 0;
+                spin_unlock_irq(&dev->rbsl);
                if (file->f_flags & O_NONBLOCK) {
                        retval = -EAGAIN;
                        goto unlock_exit;
@@ -468,6 +481,8 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
                retval = wait_event_interruptible(dev->read_wait, dev->interrupt_in_done);
                if (retval < 0)
                        goto unlock_exit;
+        } else {
+                spin_unlock_irq(&dev->rbsl);
        }
        /* actual_buffer contains actual_length + interrupt_in_buffer */
@@ -486,6 +501,17 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
        retval = bytes_to_read;
+        spin_lock_irq(&dev->rbsl);
+        if (dev->buffer_overflow) {
+                dev->buffer_overflow = 0;
+                spin_unlock_irq(&dev->rbsl);
+                rv = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+                if (rv < 0)
+                        dev->buffer_overflow = 1;
+        } else {
+                spin_unlock_irq(&dev->rbsl);
+        }
 unlock_exit:
        /* unlock the device */
        up(&dev->sem);
@@ -635,6 +661,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
                goto exit;
        }
        init_MUTEX(&dev->sem);
+        spin_lock_init(&dev->rbsl);
        dev->intf = intf;
        init_waitqueue_head(&dev->read_wait);
        init_waitqueue_head(&dev->write_wait);
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index ea2175bb2274..fe437125f14b 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -63,7 +63,8 @@ static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
                                 request, requesttype, value, index,
                                 buf, 0x0000001, 1000);
        if (result)
-                dbg("%03d < %d bytes [0x%02X]", seq, result, buf[0]);
+                dbg("%03d < %d bytes [0x%02X]", seq, result,
+                    ((unsigned char *)buf)[0]);
        else
                dbg("%03d < 0 bytes", seq);
 }
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 95a1805b064f..2353679f601e 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -273,12 +273,18 @@ static __u16 product;
 /* struct ftdi_sio_quirk is used by devices requiring special attention. */
 struct ftdi_sio_quirk {
+        int (*probe)(struct usb_serial *);
        void (*setup)(struct usb_serial *); /* Special settings during startup. */
 };
+static int   ftdi_olimex_probe          (struct usb_serial *serial);
 static void  ftdi_USB_UIRT_setup        (struct usb_serial *serial);
 static void  ftdi_HE_TIRA1_setup        (struct usb_serial *serial);
+static struct ftdi_sio_quirk ftdi_olimex_quirk = {
+        .probe  = ftdi_olimex_probe,
+};
 static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
        .setup = ftdi_USB_UIRT_setup,
 };
@@ -319,6 +325,7 @@ static struct usb_device_id id_table_combined [] = {
        { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
        { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
        { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
@@ -525,6 +532,9 @@ static struct usb_device_id id_table_combined [] = {
        { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
        { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
        { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
+        { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_olimex_quirk },
        { },                                    /* Optional parameter entry */
        { }                                     /* Terminating entry */
 };
@@ -669,7 +679,7 @@ static struct usb_serial_driver ftdi_sio_device = {
 /*
 * ***************************************************************************
- * Utlity functions
+ * Utility functions
 * ***************************************************************************
 */
@@ -1171,9 +1181,17 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
 /* Probe function to check for special devices */
 static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id)
 {
+        struct ftdi_sio_quirk *quirk = (struct ftdi_sio_quirk *)id->driver_info;
+        if (quirk && quirk->probe) {
+                int ret = quirk->probe(serial);
+                if (ret != 0)
+                        return ret;
+        }
        usb_set_serial_data(serial, (void *)id->driver_info);
-        return (0);
+        return 0;
 }
 static int ftdi_sio_port_probe(struct usb_serial_port *port)
@@ -1268,6 +1286,24 @@ static void ftdi_HE_TIRA1_setup (struct usb_serial *serial)
        priv->force_rtscts = 1;
 } /* ftdi_HE_TIRA1_setup */
+/*
+ * First port on Olimex arm-usb-ocd is reserved for JTAG interface
+ * and can be accessed from userspace using openocd.
+ */
+static int ftdi_olimex_probe(struct usb_serial *serial)
+{
+        struct usb_device *udev = serial->dev;
+        struct usb_interface *interface = serial->interface;
+        dbg("%s",__FUNCTION__);
+        if (interface == udev->actconfig->interface[0]) {
+                info("Ignoring reserved serial port on Olimex arm-usb-ocd\n");
+                return -ENODEV;
+        }
+        return 0;
+}
 /* ftdi_shutdown is called from usbserial:usb_serial_disconnect
 *   it is called when the usb device is disconnected
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 77ad0a09b384..33aee9047242 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -60,6 +60,9 @@
 /* DMX4ALL DMX Interfaces */
 #define FTDI_DMX4ALL 0xC850
+/* OpenDCC (www.opendcc.de) product id */
+#define FTDI_OPENDCC_PID        0xBFD8
 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
 #define FTDI_XF_632_PID 0xFC08  /* 632: 16x2 Character Display */
@@ -518,6 +521,15 @@
 #define FTDI_IBS_PEDO_PID       0xff3e  /* IBS PEDO-Modem (RF modem 868.35 MHz) */
 #define FTDI_IBS_PROD_PID       0xff3f  /* future device */
+/*
+ *  MaxStream devices   www.maxstream.net
+ */
+#define FTDI_MAXSTREAM_PID      0xEE18  /* Xbee PKG-U Module */
+/* Olimex */
+#define OLIMEX_VID                      0x15BA
+#define OLIMEX_ARM_USB_OCD_PID          0x0003
 /* Commands */
 #define FTDI_SIO_RESET          0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL     1 /* Set the modem control register */
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2366e7b63ece..36620c651079 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -769,11 +769,6 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
                return;
        }
-        if (!mos7840_port) {
-                dbg("%s", "NULL mos7840_port pointer \n");
-                return;
-        }
        if (mos7840_port_paranoia_check(mos7840_port->port, __FUNCTION__)) {
                dbg("%s", "Port Paranoia failed \n");
                return;
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 4adfab988e86..00afc1712c39 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -165,12 +165,10 @@ static int omninet_open (struct usb_serial_port *port, struct file *filp)
 {
        struct usb_serial       *serial = port->serial;
        struct usb_serial_port  *wport;
-        struct omninet_data     *od = usb_get_serial_port_data(port);
        int                     result = 0;
        dbg("%s - port %d", __FUNCTION__, port->number);
-        od = kmalloc( sizeof(struct omninet_data), GFP_KERNEL );
        wport = serial->port[1];
        wport->tty = port->tty;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 8c3f55b080b4..89f067d95076 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -165,7 +165,6 @@ static struct usb_device_id option_ids[] = {
        { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1410) }, /* Novatel U740 */
        { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1420) }, /* Novatel EU870 */
        { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1430) }, /* Novatel Merlin XU870 HSDPA/3G */
-        { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1430) }, /* Novatel XU870 */
        { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2100) }, /* Novatel EV620 CDMA/EV-DO */
        { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2110) }, /* Novatel Merlin ES620 / Merlin ES720 / Ovation U720 */
        { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 644607de4c11..ac1829c6e8f0 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -35,6 +35,7 @@ static struct usb_device_id id_table [] = {
        { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
        { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
        { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
+        { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless AirCard 595U */
        { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
        { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
        { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
@@ -60,6 +61,7 @@ static struct usb_device_id id_table_3port [] = {
        { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
        { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
        { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
+        { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless AirCard 595U */
        { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
        { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
        { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 6d3dad3d1dae..d35369392fed 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -84,7 +84,7 @@ resubmit:
 static int usb_onetouch_open(struct input_dev *dev)
 {
-        struct usb_onetouch *onetouch = dev->private;
+        struct usb_onetouch *onetouch = input_get_drvdata(dev);
        onetouch->is_open = 1;
        onetouch->irq->dev = onetouch->udev;
@@ -98,7 +98,7 @@ static int usb_onetouch_open(struct input_dev *dev)
 static void usb_onetouch_close(struct input_dev *dev)
 {
-        struct usb_onetouch *onetouch = dev->private;
+        struct usb_onetouch *onetouch = input_get_drvdata(dev);
        usb_kill_urb(onetouch->irq);
        onetouch->is_open = 0;
@@ -185,13 +185,14 @@ int onetouch_connect_input(struct us_data *ss)
        input_dev->name = onetouch->name;
        input_dev->phys = onetouch->phys;
        usb_to_input_id(udev, &input_dev->id);
-        input_dev->cdev.dev = &udev->dev;
+        input_dev->dev.parent = &udev->dev;
        set_bit(EV_KEY, input_dev->evbit);
        set_bit(ONETOUCH_BUTTON, input_dev->keybit);
        clear_bit(0, input_dev->keybit);
-        input_dev->private = onetouch;
+        input_set_drvdata(input_dev, onetouch);
        input_dev->open = usb_onetouch_open;
        input_dev->close = usb_onetouch_close;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 8b3145ab7757..d230ee72f9cd 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1179,14 +1179,20 @@ UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff,
                US_SC_DEVICE, US_PR_DEVICE, NULL,
                US_FL_FIX_INQUIRY ),
-/* This is a virtual windows driver CD, which the zd1211rw driver automatically
+/* These are virtual windows driver CDs, which the zd1211rw driver automatically
- * converts into a WLAN device. */
+ * converts into a WLAN devices. */
 UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
                "ZyXEL",
                "G-220F USB-WLAN Install",
                US_SC_DEVICE, US_PR_DEVICE, NULL,
                US_FL_IGNORE_DEVICE ),
+UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
+                "SiteCom",
+                "WL-117 USB-WLAN Install",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_DEVICE ),
 #ifdef CONFIG_USB_STORAGE_ISD200
 UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
                "ATI",
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4d7485fa553f..6e1f1ea21b38 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -704,6 +704,91 @@ config FB_CG6
          This is the frame buffer device driver for the CGsix (GX, TurboGX)
          frame buffer.
+config FB_FFB
+        bool "Creator/Creator3D/Elite3D support"
+        depends on FB_SBUS && SPARC64
+        select FB_CFB_COPYAREA
+        select FB_CFB_IMAGEBLIT
+        help
+          This is the frame buffer device driver for the Creator, Creator3D,
+          and Elite3D graphics boards.
+config FB_TCX
+        bool "TCX (SS4/SS5 only) support"
+        depends on FB_SBUS
+        select FB_CFB_FILLRECT
+        select FB_CFB_COPYAREA
+        select FB_CFB_IMAGEBLIT
+        help
+          This is the frame buffer device driver for the TCX 24/8bit frame
+          buffer.
+config FB_CG14
+        bool "CGfourteen (SX) support"
+        depends on FB_SBUS
+        select FB_CFB_FILLRECT
+        select FB_CFB_COPYAREA
+        select FB_CFB_IMAGEBLIT
+        help
+          This is the frame buffer device driver for the CGfourteen frame
+          buffer on Desktop SPARCsystems with the SX graphics option.
+config FB_P9100
+        bool "P9100 (Sparcbook 3 only) support"
+        depends on FB_SBUS
+        select FB_CFB_FILLRECT
+        select FB_CFB_COPYAREA
+        select FB_CFB_IMAGEBLIT
+        help
+          This is the frame buffer device driver for the P9100 card
+          supported on Sparcbook 3 machines.
+config FB_LEO
+        bool "Leo (ZX) support"
+        depends on FB_SBUS
+        select FB_CFB_FILLRECT
+        select FB_CFB_COPYAREA
+        select FB_CFB_IMAGEBLIT
+        help
+          This is the frame buffer device driver for the SBUS-based Sun ZX
+          (leo) frame buffer cards.
+config FB_IGA
+        bool "IGA 168x display support"
+        depends on FB && SPARC32
+        select FB_CFB_FILLRECT
+        select FB_CFB_COPYAREA
+        select FB_CFB_IMAGEBLIT
+        help
+          This is the framebuffer device for the INTERGRAPHICS 1680 and
+          successor frame buffer cards.
+config FB_XVR500
+        bool "Sun XVR-500 3DLABS Wildcat support"
+        depends on FB && PCI && SPARC64
+        select FB_CFB_FILLRECT
+        select FB_CFB_COPYAREA
+        select FB_CFB_IMAGEBLIT
+        help
+          This is the framebuffer device for the Sun XVR-500 and similar
+          graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+          only works on sparc64 systems where the system firwmare has
+          mostly initialized the card already.  It is treated as a
+          completely dumb framebuffer device.
+config FB_XVR2500
+        bool "Sun XVR-2500 3DLABS Wildcat support"
+        depends on FB && PCI && SPARC64
+        select FB_CFB_FILLRECT
+        select FB_CFB_COPYAREA
+        select FB_CFB_IMAGEBLIT
+        help
+          This is the framebuffer device for the Sun XVR-2500 and similar
+          graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+          only works on sparc64 systems where the system firwmare has
+          mostly initialized the card already.  It is treated as a
+          completely dumb framebuffer device.
 config FB_PVR2
        tristate "NEC PowerVR 2 display support"
        depends on FB && SH_DREAMCAST
@@ -1195,7 +1280,7 @@ config FB_ATY
 config FB_ATY_CT
        bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
        depends on PCI && FB_ATY
-        default y if SPARC64 && FB_PCI
+        default y if SPARC64 && PCI
        help
          Say Y here to support use of ATI's 64-bit Rage boards (or other
          boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
@@ -1484,95 +1569,6 @@ config FB_AU1200
 source "drivers/video/geode/Kconfig"
-config FB_FFB
-        bool "Creator/Creator3D/Elite3D support"
-        depends on FB_SBUS && SPARC64
-        select FB_CFB_COPYAREA
-        select FB_CFB_IMAGEBLIT
-        help
-          This is the frame buffer device driver for the Creator, Creator3D,
-          and Elite3D graphics boards.
-config FB_TCX
-        bool "TCX (SS4/SS5 only) support"
-        depends on FB_SBUS
-        select FB_CFB_FILLRECT
-        select FB_CFB_COPYAREA
-        select FB_CFB_IMAGEBLIT
-        help
-          This is the frame buffer device driver for the TCX 24/8bit frame
-          buffer.
-config FB_CG14
-        bool "CGfourteen (SX) support"
-        depends on FB_SBUS
-        select FB_CFB_FILLRECT
-        select FB_CFB_COPYAREA
-        select FB_CFB_IMAGEBLIT
-        help
-          This is the frame buffer device driver for the CGfourteen frame
-          buffer on Desktop SPARCsystems with the SX graphics option.
-config FB_P9100
-        bool "P9100 (Sparcbook 3 only) support"
-        depends on FB_SBUS
-        select FB_CFB_FILLRECT
-        select FB_CFB_COPYAREA
-        select FB_CFB_IMAGEBLIT
-        help
-          This is the frame buffer device driver for the P9100 card
-          supported on Sparcbook 3 machines.
-config FB_LEO
-        bool "Leo (ZX) support"
-        depends on FB_SBUS
-        select FB_CFB_FILLRECT
-        select FB_CFB_COPYAREA
-        select FB_CFB_IMAGEBLIT
-        help
-          This is the frame buffer device driver for the SBUS-based Sun ZX
-          (leo) frame buffer cards.
-config FB_XVR500
-        bool "Sun XVR-500 3DLABS Wildcat support"
-        depends on (FB = y) && PCI && SPARC64
-        select FB_CFB_FILLRECT
-        select FB_CFB_COPYAREA
-        select FB_CFB_IMAGEBLIT
-        help
-          This is the framebuffer device for the Sun XVR-500 and similar
-          graphics cards based upon the 3DLABS Wildcat chipset.  The driver
-          only works on sparc64 systems where the system firwmare has
-          mostly initialized the card already.  It is treated as a
-          completely dumb framebuffer device.
-config FB_XVR2500
-        bool "Sun XVR-2500 3DLABS Wildcat support"
-        depends on (FB = y) && PCI && SPARC64
-        select FB_CFB_FILLRECT
-        select FB_CFB_COPYAREA
-        select FB_CFB_IMAGEBLIT
-        help
-          This is the framebuffer device for the Sun XVR-2500 and similar
-          graphics cards based upon the 3DLABS Wildcat chipset.  The driver
-          only works on sparc64 systems where the system firwmare has
-          mostly initialized the card already.  It is treated as a
-          completely dumb framebuffer device.
-config FB_PCI
-        bool "PCI framebuffers"
-        depends on (FB = y) && PCI && SPARC
-config FB_IGA
-        bool "IGA 168x display support"
-        depends on SPARC32 && FB_PCI
-        select FB_CFB_FILLRECT
-        select FB_CFB_COPYAREA
-        select FB_CFB_IMAGEBLIT
-        help
-          This is the framebuffer device for the INTERGRAPHICS 1680 and
-          successor frame buffer cards.
 config FB_HIT
        tristate "HD64461 Frame Buffer support"
        depends on FB && HD64461
@@ -1796,9 +1792,10 @@ config FB_IBM_GXT4500
 config FB_PS3
        bool "PS3 GPU framebuffer driver"
        depends on (FB = y) && PS3_PS3AV
-        select FB_CFB_FILLRECT
+        select FB_SYS_FILLRECT
-        select FB_CFB_COPYAREA
+        select FB_SYS_COPYAREA
-        select FB_CFB_IMAGEBLIT
+        select FB_SYS_IMAGEBLIT
+        select FB_SYS_FOPS
        ---help---
          Include support for the virtual frame buffer in the PS3 platform.
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 267c1ff9ebd9..a12589898597 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -394,26 +394,18 @@ static void imxfb_setup_gpio(struct imxfb_info *fbi)
        /* initialize GPIOs */
        imx_gpio_mode(PD6_PF_LSCLK);
-        imx_gpio_mode(PD10_PF_SPL_SPR);
        imx_gpio_mode(PD11_PF_CONTRAST);
        imx_gpio_mode(PD14_PF_FLM_VSYNC);
        imx_gpio_mode(PD13_PF_LP_HSYNC);
-        imx_gpio_mode(PD7_PF_REV);
-        imx_gpio_mode(PD8_PF_CLS);
-#ifndef CONFIG_MACH_PIMX1
-        /* on PiMX1 used as buffers enable signal
-         */
-        imx_gpio_mode(PD9_PF_PS);
-#endif
-#ifndef CONFIG_MACH_MX1FS2
-        /* on mx1fs2 this pin is used to (de)activate the display, so we need
-         * it as a normal gpio
-         */
        imx_gpio_mode(PD12_PF_ACD_OE);
-#endif
+        /* These are only needed for Sharp HR TFT displays */
+        if (fbi->pcr & PCR_SHARP) {
+                imx_gpio_mode(PD7_PF_REV);
+                imx_gpio_mode(PD8_PF_CLS);
+                imx_gpio_mode(PD9_PF_PS);
+                imx_gpio_mode(PD10_PF_SPL_SPR);
+        }
 }
 #ifdef CONFIG_PM
@@ -476,7 +468,6 @@ static int __init imxfb_init_fbinfo(struct device *dev)
        info->fbops                     = &imxfb_ops;
        info->flags                     = FBINFO_FLAG_DEFAULT;
-        info->pseudo_palette            = (fbi + 1);
        fbi->rgb[RGB_16]                = &def_rgb_16;
        fbi->rgb[RGB_8]                 = &def_rgb_8;
@@ -499,6 +490,7 @@ static int __init imxfb_init_fbinfo(struct device *dev)
        info->var.sync                  = inf->sync;
        info->var.grayscale             = inf->cmap_greyscale;
        fbi->cmap_inverse               = inf->cmap_inverse;
+        fbi->cmap_static                = inf->cmap_static;
        fbi->pcr                        = inf->pcr;
        fbi->lscr1                      = inf->lscr1;
        fbi->dmacr                      = inf->dmacr;
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index ab5e66890e4e..0a04483aa3e0 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -183,15 +183,17 @@ static inline void pm2_RDAC_WR(struct pm2fb_par* p, s32 idx, u32 v)
                index = PM2VR_RD_INDEXED_DATA;
                break;
        }       
-        mb();
+        wmb();
        pm2_WR(p, index, v);
+        wmb();
 }
 static inline void pm2v_RDAC_WR(struct pm2fb_par* p, s32 idx, u32 v)
 {
        pm2_WR(p, PM2VR_RD_INDEX_LOW, idx & 0xff);
-        mb();
+        wmb();
        pm2_WR(p, PM2VR_RD_INDEXED_DATA, v);
+        wmb();
 }
 #ifdef CONFIG_FB_PM2_FIFO_DISCONNECT
@@ -466,11 +468,9 @@ static void set_memclock(struct pm2fb_par* par, u32 clk)
                WAIT_FIFO(par, 8);
                pm2_WR(par, PM2VR_RD_INDEX_HIGH, PM2VI_RD_MCLK_CONTROL >> 8);
                pm2v_RDAC_WR(par, PM2VI_RD_MCLK_CONTROL, 0);
-                wmb();
                pm2v_RDAC_WR(par, PM2VI_RD_MCLK_PRESCALE, m);
                pm2v_RDAC_WR(par, PM2VI_RD_MCLK_FEEDBACK, n);
                pm2v_RDAC_WR(par, PM2VI_RD_MCLK_POSTSCALE, p);
-                wmb();
                pm2v_RDAC_WR(par, PM2VI_RD_MCLK_CONTROL, 1);
                rmb();
                for (i = 256;
@@ -483,12 +483,9 @@ static void set_memclock(struct pm2fb_par* par, u32 clk)
                pm2_mnp(clk, &m, &n, &p);
                WAIT_FIFO(par, 10);
                pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 6);
-                wmb();
                pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_1, m);
                pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_2, n);
-                wmb();
                pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 8|p);
-                wmb();
                pm2_RDAC_RD(par, PM2I_RD_MEMORY_CLOCK_STATUS);
                rmb();
                for (i = 256;
@@ -509,12 +506,9 @@ static void set_pixclock(struct pm2fb_par* par, u32 clk)
                pm2_mnp(clk, &m, &n, &p);
                WAIT_FIFO(par, 8);
                pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A3, 0);
-                wmb();
                pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A1, m);
                pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A2, n);
-                wmb();
                pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A3, 8|p);
-                wmb();
                pm2_RDAC_RD(par, PM2I_RD_PIXEL_CLOCK_STATUS);
                rmb();
                for (i = 256;
@@ -1066,10 +1060,9 @@ static void pm2fb_block_op(struct fb_info* info, int copy,
        if (!w || !h)
                return;
-        WAIT_FIFO(par, 6);
+        WAIT_FIFO(par, 5);
        pm2_WR(par, PM2R_CONFIG, PM2F_CONFIG_FB_WRITE_ENABLE |
                PM2F_CONFIG_FB_READ_SOURCE_ENABLE);
-        pm2_WR(par, PM2R_FB_PIXEL_OFFSET, 0);
        if (copy)
                pm2_WR(par, PM2R_FB_SOURCE_DELTA,
                        ((ysrc-y) & 0xfff) << 16 | ((xsrc-x) & 0xfff));
diff --git a/drivers/video/pm3fb.c b/drivers/video/pm3fb.c
index c77a1a1fd46b..616a0c08e30c 100644
--- a/drivers/video/pm3fb.c
+++ b/drivers/video/pm3fb.c
@@ -52,11 +52,6 @@
 static char *mode_option __devinitdata;
 /*
- *  If your driver supports multiple boards, you should make the
- *  below data types arrays, or allocate them dynamically (using kmalloc()).
- */
-/*
 * This structure defines the hardware state of the graphics card. Normally
 * you place this in a header file in linux/include/video. This file usually
 * also includes register information. That allows other driver subsystems
@@ -67,7 +62,7 @@ struct pm3_par {
        unsigned char   __iomem *v_regs;/* virtual address of p_regs */
        u32             video;          /* video flags before blanking */
        u32             base;           /* screen base (xoffset+yoffset) in 128 bits unit */
-        u32             palette[16];
+        u32             palette[16];
 };
 /*
@@ -104,36 +99,28 @@ static inline void PM3_WAIT(struct pm3_par *par, u32 n)
        while (PM3_READ_REG(par, PM3InFIFOSpace) < n);
 }
-static inline void PM3_SLOW_WRITE_REG(struct pm3_par *par, s32 off, u32 v)
-{
-        if (par->v_regs) {
-                mb();
-                PM3_WAIT(par, 1);
-                wmb();
-                PM3_WRITE_REG(par, off, v);
-        }
-}
-static inline void PM3_SET_INDEX(struct pm3_par *par, unsigned index)
-{
-        PM3_SLOW_WRITE_REG(par, PM3RD_IndexHigh, (index >> 8) & 0xff);
-        PM3_SLOW_WRITE_REG(par, PM3RD_IndexLow, index & 0xff);
-}
 static inline void PM3_WRITE_DAC_REG(struct pm3_par *par, unsigned r, u8 v)
 {
-        PM3_SET_INDEX(par, r);
+        PM3_WAIT(par, 3);
+        PM3_WRITE_REG(par, PM3RD_IndexHigh, (r >> 8) & 0xff);
+        PM3_WRITE_REG(par, PM3RD_IndexLow, r & 0xff);
        wmb();
        PM3_WRITE_REG(par, PM3RD_IndexedData, v);
+        wmb();
 }
 static inline void pm3fb_set_color(struct pm3_par *par, unsigned char regno,
                        unsigned char r, unsigned char g, unsigned char b)
 {
-        PM3_SLOW_WRITE_REG(par, PM3RD_PaletteWriteAddress, regno);
+        PM3_WAIT(par, 4);
-        PM3_SLOW_WRITE_REG(par, PM3RD_PaletteData, r);
+        PM3_WRITE_REG(par, PM3RD_PaletteWriteAddress, regno);
-        PM3_SLOW_WRITE_REG(par, PM3RD_PaletteData, g);
+        wmb();
-        PM3_SLOW_WRITE_REG(par, PM3RD_PaletteData, b);
+        PM3_WRITE_REG(par, PM3RD_PaletteData, r);
+        wmb();
+        PM3_WRITE_REG(par, PM3RD_PaletteData, g);
+        wmb();
+        PM3_WRITE_REG(par, PM3RD_PaletteData, b);
+        wmb();
 }
 static void pm3fb_clear_colormap(struct pm3_par *par,
@@ -141,7 +128,7 @@ static void pm3fb_clear_colormap(struct pm3_par *par,
 {
        int i;
-        for (i = 0; i < 256 ; i++) /* fill color map with white */
+        for (i = 0; i < 256 ; i++)
                pm3fb_set_color(par, i, r, g, b);
 }
@@ -175,19 +162,26 @@ static void pm3fb_calculate_clock(unsigned long reqclock,
        }
 }
-static inline int pm3fb_shift_bpp(unsigned long depth, int v)
+static inline int pm3fb_depth(const struct fb_var_screeninfo *var)
 {
-        switch (depth) {
+        if ( var->bits_per_pixel == 16 )
+                return var->red.length + var->green.length
+                        + var->blue.length;
+        return var->bits_per_pixel;
+}
+static inline int pm3fb_shift_bpp(unsigned bpp, int v)
+{
+        switch (bpp) {
        case 8:
                return (v >> 4);
-        case 12:
-        case 15:
        case 16:
                return (v >> 3);
        case 32:
                return (v >> 2);
        }
-        DPRINTK("Unsupported depth %ld\n", depth);
+        DPRINTK("Unsupported depth %u\n", bpp);
        return 0;
 }
@@ -206,56 +200,50 @@ static void pm3fb_write_mode(struct fb_info *info)
        const u32 vbend = vsend + info->var.upper_margin;
        const u32 vtotal = info->var.yres + vbend;
        const u32 width = (info->var.xres_virtual + 7) & ~7;
+        const unsigned bpp = info->var.bits_per_pixel;
-        PM3_SLOW_WRITE_REG(par, PM3MemBypassWriteMask, 0xffffffff);
-        PM3_SLOW_WRITE_REG(par, PM3Aperture0, 0x00000000);
+        PM3_WAIT(par, 20);
-        PM3_SLOW_WRITE_REG(par, PM3Aperture1, 0x00000000);
+        PM3_WRITE_REG(par, PM3MemBypassWriteMask, 0xffffffff);
-        PM3_SLOW_WRITE_REG(par, PM3FIFODis, 0x00000007);
+        PM3_WRITE_REG(par, PM3Aperture0, 0x00000000);
+        PM3_WRITE_REG(par, PM3Aperture1, 0x00000000);
-        PM3_SLOW_WRITE_REG(par, PM3HTotal,
+        PM3_WRITE_REG(par, PM3FIFODis, 0x00000007);
-                           pm3fb_shift_bpp(info->var.bits_per_pixel,
-                                          htotal - 1));
+        PM3_WRITE_REG(par, PM3HTotal,
-        PM3_SLOW_WRITE_REG(par, PM3HsEnd,
+                           pm3fb_shift_bpp(bpp, htotal - 1));
-                           pm3fb_shift_bpp(info->var.bits_per_pixel,
+        PM3_WRITE_REG(par, PM3HsEnd,
-                                          hsend));
+                           pm3fb_shift_bpp(bpp, hsend));
-        PM3_SLOW_WRITE_REG(par, PM3HsStart,
+        PM3_WRITE_REG(par, PM3HsStart,
-                           pm3fb_shift_bpp(info->var.bits_per_pixel,
+                           pm3fb_shift_bpp(bpp, hsstart));
-                                          hsstart));
+        PM3_WRITE_REG(par, PM3HbEnd,
-        PM3_SLOW_WRITE_REG(par, PM3HbEnd,
+                           pm3fb_shift_bpp(bpp, hbend));
-                           pm3fb_shift_bpp(info->var.bits_per_pixel,
+        PM3_WRITE_REG(par, PM3HgEnd,
-                                          hbend));
+                           pm3fb_shift_bpp(bpp, hbend));
-        PM3_SLOW_WRITE_REG(par, PM3HgEnd,
+        PM3_WRITE_REG(par, PM3ScreenStride,
-                           pm3fb_shift_bpp(info->var.bits_per_pixel,
+                           pm3fb_shift_bpp(bpp, width));
-                                          hbend));
+        PM3_WRITE_REG(par, PM3VTotal, vtotal - 1);
-        PM3_SLOW_WRITE_REG(par, PM3ScreenStride,
+        PM3_WRITE_REG(par, PM3VsEnd, vsend - 1);
-                           pm3fb_shift_bpp(info->var.bits_per_pixel,
+        PM3_WRITE_REG(par, PM3VsStart, vsstart - 1);
-                                          width));
+        PM3_WRITE_REG(par, PM3VbEnd, vbend);
-        PM3_SLOW_WRITE_REG(par, PM3VTotal, vtotal - 1);
-        PM3_SLOW_WRITE_REG(par, PM3VsEnd, vsend - 1);
+        switch (bpp) {
-        PM3_SLOW_WRITE_REG(par, PM3VsStart, vsstart - 1);
-        PM3_SLOW_WRITE_REG(par, PM3VbEnd, vbend);
-        switch (info->var.bits_per_pixel) {
        case 8:
-                PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
+                PM3_WRITE_REG(par, PM3ByAperture1Mode,
                                   PM3ByApertureMode_PIXELSIZE_8BIT);
-                PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
+                PM3_WRITE_REG(par, PM3ByAperture2Mode,
                                   PM3ByApertureMode_PIXELSIZE_8BIT);
                break;
-        case 12:
-        case 15:
        case 16:
 #ifndef __BIG_ENDIAN
-                PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
+                PM3_WRITE_REG(par, PM3ByAperture1Mode,
                                   PM3ByApertureMode_PIXELSIZE_16BIT);
-                PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
+                PM3_WRITE_REG(par, PM3ByAperture2Mode,
                                   PM3ByApertureMode_PIXELSIZE_16BIT);
 #else
-                PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
+                PM3_WRITE_REG(par, PM3ByAperture1Mode,
                                   PM3ByApertureMode_PIXELSIZE_16BIT |
                                   PM3ByApertureMode_BYTESWAP_BADC);
-                PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
+                PM3_WRITE_REG(par, PM3ByAperture2Mode,
                                   PM3ByApertureMode_PIXELSIZE_16BIT |
                                   PM3ByApertureMode_BYTESWAP_BADC);
 #endif /* ! __BIG_ENDIAN */
@@ -263,23 +251,22 @@ static void pm3fb_write_mode(struct fb_info *info)
        case 32:
 #ifndef __BIG_ENDIAN
-                PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
+                PM3_WRITE_REG(par, PM3ByAperture1Mode,
                                   PM3ByApertureMode_PIXELSIZE_32BIT);
-                PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
+                PM3_WRITE_REG(par, PM3ByAperture2Mode,
                                   PM3ByApertureMode_PIXELSIZE_32BIT);
 #else
-                PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
+                PM3_WRITE_REG(par, PM3ByAperture1Mode,
                                   PM3ByApertureMode_PIXELSIZE_32BIT |
                                   PM3ByApertureMode_BYTESWAP_DCBA);
-                PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
+                PM3_WRITE_REG(par, PM3ByAperture2Mode,
                                   PM3ByApertureMode_PIXELSIZE_32BIT |
                                   PM3ByApertureMode_BYTESWAP_DCBA);
 #endif /* ! __BIG_ENDIAN */
                break;
        default:
-                DPRINTK("Unsupported depth %d\n",
+                DPRINTK("Unsupported depth %d\n", bpp);
-                        info->var.bits_per_pixel);
                break;
        }
@@ -296,14 +283,15 @@ static void pm3fb_write_mode(struct fb_info *info)
                           PM3VideoControl_VSYNC_MASK);
                video |= PM3VideoControl_HSYNC_ACTIVE_HIGH |
                         PM3VideoControl_VSYNC_ACTIVE_HIGH;
-                PM3_SLOW_WRITE_REG(par, PM3VideoControl, video);
+                PM3_WRITE_REG(par, PM3VideoControl, video);
        }
-        PM3_SLOW_WRITE_REG(par, PM3VClkCtl,
+        PM3_WRITE_REG(par, PM3VClkCtl,
                           (PM3_READ_REG(par, PM3VClkCtl) & 0xFFFFFFFC));
-        PM3_SLOW_WRITE_REG(par, PM3ScreenBase, par->base);
+        PM3_WRITE_REG(par, PM3ScreenBase, par->base);
-        PM3_SLOW_WRITE_REG(par, PM3ChipConfig,
+        PM3_WRITE_REG(par, PM3ChipConfig,
                           (PM3_READ_REG(par, PM3ChipConfig) & 0xFFFFFFFD));
+        wmb();
        {
                unsigned char uninitialized_var(m);     /* ClkPreScale */
                unsigned char uninitialized_var(n);     /* ClkFeedBackScale */
@@ -337,7 +325,7 @@ static void pm3fb_write_mode(struct fb_info *info)
        PM3_WRITE_DAC_REG(par, PM3RD_DACControl, 0x00);
-        switch (info->var.bits_per_pixel) {
+        switch (pm3fb_depth(&info->var)) {
        case 8:
                PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
                                  PM3RD_PixelSize_8_BIT_PIXELS);
@@ -393,57 +381,44 @@ static void pm3fb_write_mode(struct fb_info *info)
 * hardware independent functions
 */
 int pm3fb_init(void);
-int pm3fb_setup(char*);
 static int pm3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
        u32 lpitch;
+        unsigned bpp = var->red.length + var->green.length
+                        + var->blue.length + var->transp.length;
-        var->transp.offset = 0;
+        if ( bpp != var->bits_per_pixel ) {
-        var->transp.length = 0;
+                /* set predefined mode for bits_per_pixel settings */
-        switch(var->bits_per_pixel) {
-        case 8:
+                switch(var->bits_per_pixel) {
-                var->red.length = var->green.length = var->blue.length = 8;
+                case 8:
-                var->red.offset = var->green.offset = var->blue.offset = 0;
+                        var->red.length = var->green.length = var->blue.length = 8;
-                break;
+                        var->red.offset = var->green.offset = var->blue.offset = 0;
-        case 12:
+                        var->transp.offset = 0;
-                var->red.offset   = 8;
+                        var->transp.length = 0;
-                var->red.length   = 4;
+                        break;
-                var->green.offset = 4;
+                case 16:
-                var->green.length = 4;
+                        var->red.length = var->blue.length = 5;
-                var->blue.offset  = 0;
+                        var->green.length = 6;
-                var->blue.length  = 4;
+                        var->transp.length = 0;
-                var->transp.offset = 12;
+                        break;
-                var->transp.length = 4;
+                case 32:
-        case 15:
+                        var->red.length = var->green.length = var->blue.length = 8;
-                var->red.offset   = 10;
+                        var->transp.length = 8;
-                var->red.length   = 5;
+                        break;
-                var->green.offset = 5;
+                default:
-                var->green.length = 5;
+                        DPRINTK("depth not supported: %u\n", var->bits_per_pixel);
-                var->blue.offset  = 0;
+                        return -EINVAL;
-                var->blue.length  = 5;
+                }
-                var->transp.offset = 15;
+        }
-                var->transp.length = 1;
+        /* it is assumed BGRA order */
-                break;
+        if (var->bits_per_pixel > 8 )
-        case 16:
+        {
-                var->red.offset   = 11;
+                var->blue.offset = 0;
-                var->red.length   = 5;
+                var->green.offset = var->blue.length;
-                var->green.offset = 5;
+                var->red.offset = var->green.offset + var->green.length;
-                var->green.length = 6;
+                var->transp.offset = var->red.offset + var->red.length;
-                var->blue.offset  = 0;
-                var->blue.length  = 5;
-                break;
-        case 32:
-                var->transp.offset = 24;
-                var->transp.length = 8;
-                var->red.offset   = 16;
-                var->green.offset = 8;
-                var->blue.offset  = 0;
-                var->red.length = var->green.length = var->blue.length = 8;
-                break;
-        default:
-                DPRINTK("depth not supported: %u\n", var->bits_per_pixel);
-                return -EINVAL;
        }
        var->height = var->width = -1;
@@ -502,10 +477,9 @@ static int pm3fb_set_par(struct fb_info *info)
 {
        struct pm3_par *par = info->par;
        const u32 xres = (info->var.xres + 31) & ~31;
-        const int depth = (info->var.bits_per_pixel + 7) & ~7;
+        const unsigned bpp = info->var.bits_per_pixel;
-        par->base = pm3fb_shift_bpp(info->var.bits_per_pixel,
+        par->base = pm3fb_shift_bpp(bpp,(info->var.yoffset * xres)
-                                        (info->var.yoffset * xres)
                                        + info->var.xoffset);
        par->video = 0;
@@ -530,12 +504,10 @@ static int pm3fb_set_par(struct fb_info *info)
                par->video |= PM3VideoControl_DISABLE;
                DPRINTK("PM3Video disabled\n");
        }
-        switch (depth) {
+        switch (bpp) {
        case 8:
                par->video |= PM3VideoControl_PIXELSIZE_8BIT;
                break;
-        case 12:
-        case 15:
        case 16:
                par->video |= PM3VideoControl_PIXELSIZE_16BIT;
                break;
@@ -548,9 +520,9 @@ static int pm3fb_set_par(struct fb_info *info)
        }
        info->fix.visual =
-                (depth == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
+                (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
        info->fix.line_length = ((info->var.xres_virtual + 7)  & ~7)
-                                        * depth / 8;
+                                        * bpp / 8;
 /*      pm3fb_clear_memory(info, 0);*/
        pm3fb_clear_colormap(par, 0, 0, 0);
@@ -580,8 +552,8 @@ static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green,
         *   var->{color}.length contains length of bitfield
         *   {hardwarespecific} contains width of DAC
         *   pseudo_palette[X] is programmed to (X << red.offset) |
-         *                                    (X << green.offset) |
+         *                                      (X << green.offset) |
-         *                                    (X << blue.offset)
+         *                                      (X << blue.offset)
         *   RAMDAC[X] is programmed to (red, green, blue)
         *   color depth = SUM(var->{color}.length)
         *
@@ -621,7 +593,6 @@ static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green,
                case 8:
                        break;
                case 16:
-                case 24:
                case 32:
                        ((u32*)(info->pseudo_palette))[regno] = v;
                        break;
@@ -643,7 +614,8 @@ static int pm3fb_pan_display(struct fb_var_screeninfo *var,
        par->base = pm3fb_shift_bpp(var->bits_per_pixel,
                                        (var->yoffset * xres)
                                        + var->xoffset);
-        PM3_SLOW_WRITE_REG(par, PM3ScreenBase, par->base);
+        PM3_WAIT(par, 1);
+        PM3_WRITE_REG(par, PM3ScreenBase, par->base);
        return 0;
 }
@@ -665,31 +637,31 @@ static int pm3fb_blank(int blank_mode, struct fb_info *info)
        switch (blank_mode) {
        case FB_BLANK_UNBLANK:
-                video = video | PM3VideoControl_ENABLE;
+                video |= PM3VideoControl_ENABLE;
                break;
-        case FB_BLANK_NORMAL:   /* FIXME */
+        case FB_BLANK_NORMAL:
-                video = video & ~(PM3VideoControl_ENABLE);
+                video &= ~(PM3VideoControl_ENABLE);
                break;
        case FB_BLANK_HSYNC_SUSPEND:
-                video = video & ~(PM3VideoControl_HSYNC_MASK |
+                video &= ~(PM3VideoControl_HSYNC_MASK |
-                                  PM3VideoControl_BLANK_ACTIVE_LOW);
+                          PM3VideoControl_BLANK_ACTIVE_LOW);
                break;
        case FB_BLANK_VSYNC_SUSPEND:
-                video = video & ~(PM3VideoControl_VSYNC_MASK |
+                video &= ~(PM3VideoControl_VSYNC_MASK |
-                                  PM3VideoControl_BLANK_ACTIVE_LOW);
+                          PM3VideoControl_BLANK_ACTIVE_LOW);
                break;
        case FB_BLANK_POWERDOWN:
-                video = video & ~(PM3VideoControl_HSYNC_MASK |
+                video &= ~(PM3VideoControl_HSYNC_MASK |
-                                  PM3VideoControl_VSYNC_MASK |
+                          PM3VideoControl_VSYNC_MASK |
-                                  PM3VideoControl_BLANK_ACTIVE_LOW);
+                          PM3VideoControl_BLANK_ACTIVE_LOW);
                break;
        default:
                DPRINTK("Unsupported blanking %d\n", blank_mode);
                return 1;
        }
-        PM3_SLOW_WRITE_REG(par,PM3VideoControl, video);
+        PM3_WAIT(par, 1);
+        PM3_WRITE_REG(par,PM3VideoControl, video);
        return 0;
 }
@@ -703,9 +675,9 @@ static struct fb_ops pm3fb_ops = {
        .fb_set_par     = pm3fb_set_par,
        .fb_setcolreg   = pm3fb_setcolreg,
        .fb_pan_display = pm3fb_pan_display,
-        .fb_fillrect    = cfb_fillrect,         /* Needed !!! */
+        .fb_fillrect    = cfb_fillrect,
-        .fb_copyarea    = cfb_copyarea,         /* Needed !!! */
+        .fb_copyarea    = cfb_copyarea,
-        .fb_imageblit   = cfb_imageblit,        /* Needed !!! */
+        .fb_imageblit   = cfb_imageblit,
        .fb_blank       = pm3fb_blank,
 };
@@ -722,7 +694,7 @@ static unsigned long pm3fb_size_memory(struct pm3_par *par)
        unsigned long   memsize = 0, tempBypass, i, temp1, temp2;
        unsigned char   __iomem *screen_mem;
-        pm3fb_fix.smem_len = 64 * 1024 * 1024; /* request full aperture size */
+        pm3fb_fix.smem_len = 64 * 1024l * 1024; /* request full aperture size */
        /* Linear frame buffer - request region and map it. */
        if (!request_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len,
                                 "pm3fb smem")) {
@@ -744,7 +716,8 @@ static unsigned long pm3fb_size_memory(struct pm3_par *par)
        DPRINTK("PM3MemBypassWriteMask was: 0x%08lx\n", tempBypass);
-        PM3_SLOW_WRITE_REG(par, PM3MemBypassWriteMask, 0xFFFFFFFF);
+        PM3_WAIT(par, 1);
+        PM3_WRITE_REG(par, PM3MemBypassWriteMask, 0xFFFFFFFF);
        /* pm3 split up memory, replicates, and do a lot of nasty stuff IMHO ;-) */
        for (i = 0; i < 32; i++) {
@@ -765,10 +738,9 @@ static unsigned long pm3fb_size_memory(struct pm3_par *par)
        if (memsize + 1 == i) {
                for (i = 0; i < 32; i++) {
                        /* Clear first 32MB ; 0 is 0, no need to byteswap */
-                        writel(0x0000000,
+                        writel(0x0000000, (screen_mem + (i * 1048576)));
-                               (screen_mem + (i * 1048576)));
-                        mb();
                }
+                wmb();
                for (i = 32; i < 64; i++) {
                        fb_writel(i * 0x00345678,
@@ -787,7 +759,8 @@ static unsigned long pm3fb_size_memory(struct pm3_par *par)
        }
        DPRINTK("Second detect pass got %ld MB\n", memsize + 1);
-        PM3_SLOW_WRITE_REG(par, PM3MemBypassWriteMask, tempBypass);
+        PM3_WAIT(par, 1);
+        PM3_WRITE_REG(par, PM3MemBypassWriteMask, tempBypass);
        iounmap(screen_mem);
        release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
@@ -890,7 +863,6 @@ static int __devinit pm3fb_probe(struct pci_dev *dev,
                goto err_exit_both;
        }
-        /* This has to been done !!! */
        if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
                retval = -ENOMEM;
                goto err_exit_both;
@@ -907,7 +879,7 @@ static int __devinit pm3fb_probe(struct pci_dev *dev,
        }
        printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
           info->fix.id);
-        pci_set_drvdata(dev, info); /* or dev_set_drvdata(device, info) */
+        pci_set_drvdata(dev, info);
        return 0;
 err_exit_all:
@@ -949,8 +921,7 @@ static void __devexit pm3fb_remove(struct pci_dev *dev)
 static struct pci_device_id pm3fb_id_table[] = {
        { PCI_VENDOR_ID_3DLABS, 0x0a,
-          PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
+          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-          0xff0000, 0 },
        { 0, }
 };
@@ -964,6 +935,22 @@ static struct pci_driver pm3fb_driver = {
 MODULE_DEVICE_TABLE(pci, pm3fb_id_table);
+#ifndef MODULE
+        /*
+         *  Setup
+         */
+/*
+ * Only necessary if your driver takes special options,
+ * otherwise we fall back on the generic fb_setup().
+ */
+static int __init pm3fb_setup(char *options)
+{
+        /* Parse user speficied options (`video=pm3fb:') */
+        return 0;
+}
+#endif /* MODULE */
 int __init pm3fb_init(void)
 {
        /*
@@ -985,22 +972,6 @@ static void __exit pm3fb_exit(void)
        pci_unregister_driver(&pm3fb_driver);
 }
-#ifndef MODULE
-        /*
-         *  Setup
-         */
-/*
- * Only necessary if your driver takes special options,
- * otherwise we fall back on the generic fb_setup().
- */
-int __init pm3fb_setup(char *options)
-{
-        /* Parse user speficied options (`video=pm3fb:') */
-        return 0;
-}
-#endif /* MODULE */
 module_init(pm3fb_init);
 module_exit(pm3fb_exit);
diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c
index 9756a728b74f..9cf92ba5d6e3 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/ps3fb.c
@@ -951,12 +951,14 @@ static int ps3fb_xdr_settings(u64 xdr_lpar)
 static struct fb_ops ps3fb_ops = {
        .fb_open        = ps3fb_open,
        .fb_release     = ps3fb_release,
+        .fb_read        = fb_sys_read,
+        .fb_write       = fb_sys_write,
        .fb_check_var   = ps3fb_check_var,
        .fb_set_par     = ps3fb_set_par,
        .fb_setcolreg   = ps3fb_setcolreg,
-        .fb_fillrect    = cfb_fillrect,
+        .fb_fillrect    = sys_fillrect,
-        .fb_copyarea    = cfb_copyarea,
+        .fb_copyarea    = sys_copyarea,
-        .fb_imageblit   = cfb_imageblit,
+        .fb_imageblit   = sys_imageblit,
        .fb_mmap        = ps3fb_mmap,
        .fb_blank       = ps3fb_blank,
        .fb_ioctl       = ps3fb_ioctl,
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index 5fc86ea20692..003c49a490eb 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -660,7 +660,7 @@ int __init w100fb_probe(struct platform_device *pdev)
                        err = -ENODEV;
                        goto out;
        }
-        printk(" at 0x%08lx.\n", mem->start+W100_CFG_BASE);
+        printk(" at 0x%08lx.\n", (unsigned long) mem->start+W100_CFG_BASE);
        /* Remap the framebuffer */
        remapped_fbuf = ioremap_nocache(mem->start+MEM_WINDOW_BASE, MEM_WINDOW_SIZE);
@@ -753,10 +753,14 @@ int __init w100fb_probe(struct platform_device *pdev)
                goto out;
        }
-        device_create_file(&pdev->dev, &dev_attr_fastpllclk);
+        err = device_create_file(&pdev->dev, &dev_attr_fastpllclk);
-        device_create_file(&pdev->dev, &dev_attr_reg_read);
+        err |= device_create_file(&pdev->dev, &dev_attr_reg_read);
-        device_create_file(&pdev->dev, &dev_attr_reg_write);
+        err |= device_create_file(&pdev->dev, &dev_attr_reg_write);
-        device_create_file(&pdev->dev, &dev_attr_flip);
+        err |= device_create_file(&pdev->dev, &dev_attr_flip);
+        if (err != 0)
+                printk(KERN_WARNING "fb%d: failed to register attributes (%d)\n",
+                                info->node, err);
        printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
        return 0;