2 files changed, 11 insertions, 7 deletions

diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 96bbe7c39bee..c5ddd937dbf2 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -24,7 +24,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_hpt37x"
-#define DRV_VERSION     "0.6.8"
+#define DRV_VERSION     "0.6.9"
 
 struct hpt_clock {
         u8      xfer_speed;
@@ -1112,7 +1112,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                         pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100);
                 }
                 if (adjust == 8) {
-                        printk(KERN_WARNING "hpt37x: DPLL did not stabilize.\n");
+                        printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n");
                         return -ENODEV;
                 }
                 if (dpll == 3)
@@ -1120,7 +1120,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 else
                         private_data = (void *)hpt37x_timings_50;
 
-                printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[dpll]);
+                printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n",
+                       MHz[clock_slot], MHz[dpll]);
         } else {
                 private_data = (void *)chip_table->clocks[clock_slot];
                 /*
@@ -1133,7 +1134,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                         port = &info_hpt370_33;
                 if (clock_slot < 2 && port == &info_hpt370a)
                         port = &info_hpt370a_33;
-                printk(KERN_INFO "hpt37x: %s: Bus clock %dMHz.\n", chip_table->name, MHz[clock_slot]);
+                printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n",
+                       chip_table->name, MHz[clock_slot]);
         }
 
         /* Now kick off ATA set up */
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index aa29cde09f8b..f8f234bfc8ce 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -8,7 +8,7 @@
  * Copyright (C) 1999-2003              Andre Hedrick <andre@linux-ide.org>
  * Portions Copyright (C) 2001          Sun Microsystems, Inc.
  * Portions Copyright (C) 2003          Red Hat Inc
- * Portions Copyright (C) 2005-2006     MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2007     MontaVista Software, Inc.
  *
  *
  * TODO
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_hpt3x2n"
-#define DRV_VERSION     "0.3.3"
+#define DRV_VERSION     "0.3.4"
 
 enum {
         HPT_PCI_FAST    =       (1 << 31),
@@ -579,10 +579,12 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
         }
         if (adjust == 8) {
-                printk(KERN_WARNING "hpt3x2n: DPLL did not stabilize.\n");
+                printk(KERN_ERR "pata_hpt3x2n: DPLL did not stabilize!\n");
                 return -ENODEV;
         }
 
+        printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n",
+               pci_mhz);
         /* Set our private data up. We only need a few flags so we use
            it directly */
         port.private_data = NULL;