diff options
Diffstat (limited to 'drivers')
48 files changed, 2767 insertions, 2877 deletions
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig index d682dbc8157e..b5dc59389bb3 100644 --- a/drivers/mtd/chips/Kconfig +++ b/drivers/mtd/chips/Kconfig | |||
@@ -1,5 +1,5 @@ | |||
1 | # drivers/mtd/chips/Kconfig | 1 | # drivers/mtd/chips/Kconfig |
2 | # $Id: Kconfig,v 1.13 2004/12/01 15:49:10 nico Exp $ | 2 | # $Id: Kconfig,v 1.15 2005/06/06 23:04:35 tpoynor Exp $ |
3 | 3 | ||
4 | menu "RAM/ROM/Flash chip drivers" | 4 | menu "RAM/ROM/Flash chip drivers" |
5 | depends on MTD!=n | 5 | depends on MTD!=n |
@@ -155,6 +155,31 @@ config MTD_CFI_I8 | |||
155 | If your flash chips are interleaved in eights - i.e. you have eight | 155 | If your flash chips are interleaved in eights - i.e. you have eight |
156 | flash chips addressed by each bus cycle, then say 'Y'. | 156 | flash chips addressed by each bus cycle, then say 'Y'. |
157 | 157 | ||
158 | config MTD_OTP | ||
159 | bool "Protection Registers aka one-time programmable (OTP) bits" | ||
160 | depends on MTD_CFI_ADV_OPTIONS | ||
161 | default n | ||
162 | help | ||
163 | This enables support for reading, writing and locking so called | ||
164 | "Protection Registers" present on some flash chips. | ||
165 | A subset of them are pre-programmed at the factory with a | ||
166 | unique set of values. The rest is user-programmable. | ||
167 | |||
168 | The user-programmable Protection Registers contain one-time | ||
169 | programmable (OTP) bits; when programmed, register bits cannot be | ||
170 | erased. Each Protection Register can be accessed multiple times to | ||
171 | program individual bits, as long as the register remains unlocked. | ||
172 | |||
173 | Each Protection Register has an associated Lock Register bit. When a | ||
174 | Lock Register bit is programmed, the associated Protection Register | ||
175 | can only be read; it can no longer be programmed. Additionally, | ||
176 | because the Lock Register bits themselves are OTP, when programmed, | ||
177 | Lock Register bits cannot be erased. Therefore, when a Protection | ||
178 | Register is locked, it cannot be unlocked. | ||
179 | |||
180 | This feature should therefore be used with extreme care. Any mistake | ||
181 | in the programming of OTP bits will waste them. | ||
182 | |||
158 | config MTD_CFI_INTELEXT | 183 | config MTD_CFI_INTELEXT |
159 | tristate "Support for Intel/Sharp flash chips" | 184 | tristate "Support for Intel/Sharp flash chips" |
160 | depends on MTD_GEN_PROBE | 185 | depends on MTD_GEN_PROBE |
@@ -275,7 +300,7 @@ config MTD_JEDEC | |||
275 | 300 | ||
276 | config MTD_XIP | 301 | config MTD_XIP |
277 | bool "XIP aware MTD support" | 302 | bool "XIP aware MTD support" |
278 | depends on !SMP && MTD_CFI_INTELEXT && EXPERIMENTAL | 303 | depends on !SMP && (MTD_CFI_INTELEXT || MTD_CFI_AMDSTD) && EXPERIMENTAL |
279 | default y if XIP_KERNEL | 304 | default y if XIP_KERNEL |
280 | help | 305 | help |
281 | This allows MTD support to work with flash memory which is also | 306 | This allows MTD support to work with flash memory which is also |
diff --git a/drivers/mtd/chips/amd_flash.c b/drivers/mtd/chips/amd_flash.c index 41e2e3e31603..2dafeba3f3d5 100644 --- a/drivers/mtd/chips/amd_flash.c +++ b/drivers/mtd/chips/amd_flash.c | |||
@@ -3,7 +3,7 @@ | |||
3 | * | 3 | * |
4 | * Author: Jonas Holmberg <jonas.holmberg@axis.com> | 4 | * Author: Jonas Holmberg <jonas.holmberg@axis.com> |
5 | * | 5 | * |
6 | * $Id: amd_flash.c,v 1.26 2004/11/20 12:49:04 dwmw2 Exp $ | 6 | * $Id: amd_flash.c,v 1.27 2005/02/04 07:43:09 jonashg Exp $ |
7 | * | 7 | * |
8 | * Copyright (c) 2001 Axis Communications AB | 8 | * Copyright (c) 2001 Axis Communications AB |
9 | * | 9 | * |
@@ -67,7 +67,6 @@ | |||
67 | #define AM29LV160DT 0x22C4 | 67 | #define AM29LV160DT 0x22C4 |
68 | #define AM29LV160DB 0x2249 | 68 | #define AM29LV160DB 0x2249 |
69 | #define AM29BDS323D 0x22D1 | 69 | #define AM29BDS323D 0x22D1 |
70 | #define AM29BDS643D 0x227E | ||
71 | 70 | ||
72 | /* Atmel */ | 71 | /* Atmel */ |
73 | #define AT49xV16x 0x00C0 | 72 | #define AT49xV16x 0x00C0 |
@@ -618,17 +617,6 @@ static struct mtd_info *amd_flash_probe(struct map_info *map) | |||
618 | { .offset = 0x3f0000, .erasesize = 0x02000, .numblocks = 8 }, | 617 | { .offset = 0x3f0000, .erasesize = 0x02000, .numblocks = 8 }, |
619 | } | 618 | } |
620 | }, { | 619 | }, { |
621 | .mfr_id = MANUFACTURER_AMD, | ||
622 | .dev_id = AM29BDS643D, | ||
623 | .name = "AMD AM29BDS643D", | ||
624 | .size = 0x00800000, | ||
625 | .numeraseregions = 3, | ||
626 | .regions = { | ||
627 | { .offset = 0x000000, .erasesize = 0x10000, .numblocks = 96 }, | ||
628 | { .offset = 0x600000, .erasesize = 0x10000, .numblocks = 31 }, | ||
629 | { .offset = 0x7f0000, .erasesize = 0x02000, .numblocks = 8 }, | ||
630 | } | ||
631 | }, { | ||
632 | .mfr_id = MANUFACTURER_ATMEL, | 620 | .mfr_id = MANUFACTURER_ATMEL, |
633 | .dev_id = AT49xV16x, | 621 | .dev_id = AT49xV16x, |
634 | .name = "Atmel AT49xV16x", | 622 | .name = "Atmel AT49xV16x", |
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index c268bcd71720..0cfcd88468e0 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c | |||
@@ -4,7 +4,7 @@ | |||
4 | * | 4 | * |
5 | * (C) 2000 Red Hat. GPL'd | 5 | * (C) 2000 Red Hat. GPL'd |
6 | * | 6 | * |
7 | * $Id: cfi_cmdset_0001.c,v 1.164 2004/11/16 18:29:00 dwmw2 Exp $ | 7 | * $Id: cfi_cmdset_0001.c,v 1.178 2005/05/19 17:05:43 nico Exp $ |
8 | * | 8 | * |
9 | * | 9 | * |
10 | * 10/10/2000 Nicolas Pitre <nico@cam.org> | 10 | * 10/10/2000 Nicolas Pitre <nico@cam.org> |
@@ -29,6 +29,7 @@ | |||
29 | #include <linux/slab.h> | 29 | #include <linux/slab.h> |
30 | #include <linux/delay.h> | 30 | #include <linux/delay.h> |
31 | #include <linux/interrupt.h> | 31 | #include <linux/interrupt.h> |
32 | #include <linux/reboot.h> | ||
32 | #include <linux/mtd/xip.h> | 33 | #include <linux/mtd/xip.h> |
33 | #include <linux/mtd/map.h> | 34 | #include <linux/mtd/map.h> |
34 | #include <linux/mtd/mtd.h> | 35 | #include <linux/mtd/mtd.h> |
@@ -48,16 +49,25 @@ | |||
48 | #define M50LPW080 0x002F | 49 | #define M50LPW080 0x002F |
49 | 50 | ||
50 | static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); | 51 | static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); |
51 | //static int cfi_intelext_read_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *); | ||
52 | //static int cfi_intelext_read_fact_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *); | ||
53 | static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); | 52 | static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); |
54 | static int cfi_intelext_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); | 53 | static int cfi_intelext_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); |
55 | static int cfi_intelext_erase_varsize(struct mtd_info *, struct erase_info *); | 54 | static int cfi_intelext_erase_varsize(struct mtd_info *, struct erase_info *); |
56 | static void cfi_intelext_sync (struct mtd_info *); | 55 | static void cfi_intelext_sync (struct mtd_info *); |
57 | static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len); | 56 | static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len); |
58 | static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len); | 57 | static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len); |
58 | #ifdef CONFIG_MTD_OTP | ||
59 | static int cfi_intelext_read_fact_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *); | ||
60 | static int cfi_intelext_read_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *); | ||
61 | static int cfi_intelext_write_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *); | ||
62 | static int cfi_intelext_lock_user_prot_reg (struct mtd_info *, loff_t, size_t); | ||
63 | static int cfi_intelext_get_fact_prot_info (struct mtd_info *, | ||
64 | struct otp_info *, size_t); | ||
65 | static int cfi_intelext_get_user_prot_info (struct mtd_info *, | ||
66 | struct otp_info *, size_t); | ||
67 | #endif | ||
59 | static int cfi_intelext_suspend (struct mtd_info *); | 68 | static int cfi_intelext_suspend (struct mtd_info *); |
60 | static void cfi_intelext_resume (struct mtd_info *); | 69 | static void cfi_intelext_resume (struct mtd_info *); |
70 | static int cfi_intelext_reboot (struct notifier_block *, unsigned long, void *); | ||
61 | 71 | ||
62 | static void cfi_intelext_destroy(struct mtd_info *); | 72 | static void cfi_intelext_destroy(struct mtd_info *); |
63 | 73 | ||
@@ -252,7 +262,8 @@ read_pri_intelext(struct map_info *map, __u16 adr) | |||
252 | int nb_parts, i; | 262 | int nb_parts, i; |
253 | 263 | ||
254 | /* Protection Register info */ | 264 | /* Protection Register info */ |
255 | extra_size += (extp->NumProtectionFields - 1) * (4 + 6); | 265 | extra_size += (extp->NumProtectionFields - 1) * |
266 | sizeof(struct cfi_intelext_otpinfo); | ||
256 | 267 | ||
257 | /* Burst Read info */ | 268 | /* Burst Read info */ |
258 | extra_size += 6; | 269 | extra_size += 6; |
@@ -324,7 +335,9 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary) | |||
324 | mtd->resume = cfi_intelext_resume; | 335 | mtd->resume = cfi_intelext_resume; |
325 | mtd->flags = MTD_CAP_NORFLASH; | 336 | mtd->flags = MTD_CAP_NORFLASH; |
326 | mtd->name = map->name; | 337 | mtd->name = map->name; |
327 | 338 | ||
339 | mtd->reboot_notifier.notifier_call = cfi_intelext_reboot; | ||
340 | |||
328 | if (cfi->cfi_mode == CFI_MODE_CFI) { | 341 | if (cfi->cfi_mode == CFI_MODE_CFI) { |
329 | /* | 342 | /* |
330 | * It's a real CFI chip, not one for which the probe | 343 | * It's a real CFI chip, not one for which the probe |
@@ -422,9 +435,13 @@ static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd) | |||
422 | mtd->eraseregions[i].numblocks); | 435 | mtd->eraseregions[i].numblocks); |
423 | } | 436 | } |
424 | 437 | ||
425 | #if 0 | 438 | #ifdef CONFIG_MTD_OTP |
426 | mtd->read_user_prot_reg = cfi_intelext_read_user_prot_reg; | ||
427 | mtd->read_fact_prot_reg = cfi_intelext_read_fact_prot_reg; | 439 | mtd->read_fact_prot_reg = cfi_intelext_read_fact_prot_reg; |
440 | mtd->read_user_prot_reg = cfi_intelext_read_user_prot_reg; | ||
441 | mtd->write_user_prot_reg = cfi_intelext_write_user_prot_reg; | ||
442 | mtd->lock_user_prot_reg = cfi_intelext_lock_user_prot_reg; | ||
443 | mtd->get_fact_prot_info = cfi_intelext_get_fact_prot_info; | ||
444 | mtd->get_user_prot_info = cfi_intelext_get_user_prot_info; | ||
428 | #endif | 445 | #endif |
429 | 446 | ||
430 | /* This function has the potential to distort the reality | 447 | /* This function has the potential to distort the reality |
@@ -433,6 +450,7 @@ static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd) | |||
433 | goto setup_err; | 450 | goto setup_err; |
434 | 451 | ||
435 | __module_get(THIS_MODULE); | 452 | __module_get(THIS_MODULE); |
453 | register_reboot_notifier(&mtd->reboot_notifier); | ||
436 | return mtd; | 454 | return mtd; |
437 | 455 | ||
438 | setup_err: | 456 | setup_err: |
@@ -471,7 +489,8 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd, | |||
471 | int offs, numregions, numparts, partshift, numvirtchips, i, j; | 489 | int offs, numregions, numparts, partshift, numvirtchips, i, j; |
472 | 490 | ||
473 | /* Protection Register info */ | 491 | /* Protection Register info */ |
474 | offs = (extp->NumProtectionFields - 1) * (4 + 6); | 492 | offs = (extp->NumProtectionFields - 1) * |
493 | sizeof(struct cfi_intelext_otpinfo); | ||
475 | 494 | ||
476 | /* Burst Read info */ | 495 | /* Burst Read info */ |
477 | offs += 6; | 496 | offs += 6; |
@@ -563,7 +582,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr | |||
563 | resettime: | 582 | resettime: |
564 | timeo = jiffies + HZ; | 583 | timeo = jiffies + HZ; |
565 | retry: | 584 | retry: |
566 | if (chip->priv && (mode == FL_WRITING || mode == FL_ERASING)) { | 585 | if (chip->priv && (mode == FL_WRITING || mode == FL_ERASING || mode == FL_OTP_WRITE)) { |
567 | /* | 586 | /* |
568 | * OK. We have possibility for contension on the write/erase | 587 | * OK. We have possibility for contension on the write/erase |
569 | * operations which are global to the real chip and not per | 588 | * operations which are global to the real chip and not per |
@@ -807,10 +826,6 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad | |||
807 | * assembly to make sure inline functions were actually inlined and that gcc | 826 | * assembly to make sure inline functions were actually inlined and that gcc |
808 | * didn't emit calls to its own support functions). Also configuring MTD CFI | 827 | * didn't emit calls to its own support functions). Also configuring MTD CFI |
809 | * support to a single buswidth and a single interleave is also recommended. | 828 | * support to a single buswidth and a single interleave is also recommended. |
810 | * Note that not only IRQs are disabled but the preemption count is also | ||
811 | * increased to prevent other locking primitives (namely spin_unlock) from | ||
812 | * decrementing the preempt count to zero and scheduling the CPU away while | ||
813 | * not in array mode. | ||
814 | */ | 829 | */ |
815 | 830 | ||
816 | static void xip_disable(struct map_info *map, struct flchip *chip, | 831 | static void xip_disable(struct map_info *map, struct flchip *chip, |
@@ -818,7 +833,6 @@ static void xip_disable(struct map_info *map, struct flchip *chip, | |||
818 | { | 833 | { |
819 | /* TODO: chips with no XIP use should ignore and return */ | 834 | /* TODO: chips with no XIP use should ignore and return */ |
820 | (void) map_read(map, adr); /* ensure mmu mapping is up to date */ | 835 | (void) map_read(map, adr); /* ensure mmu mapping is up to date */ |
821 | preempt_disable(); | ||
822 | local_irq_disable(); | 836 | local_irq_disable(); |
823 | } | 837 | } |
824 | 838 | ||
@@ -831,9 +845,8 @@ static void __xipram xip_enable(struct map_info *map, struct flchip *chip, | |||
831 | chip->state = FL_READY; | 845 | chip->state = FL_READY; |
832 | } | 846 | } |
833 | (void) map_read(map, adr); | 847 | (void) map_read(map, adr); |
834 | asm volatile (".rep 8; nop; .endr"); /* fill instruction prefetch */ | 848 | xip_iprefetch(); |
835 | local_irq_enable(); | 849 | local_irq_enable(); |
836 | preempt_enable(); | ||
837 | } | 850 | } |
838 | 851 | ||
839 | /* | 852 | /* |
@@ -909,7 +922,7 @@ static void __xipram xip_udelay(struct map_info *map, struct flchip *chip, | |||
909 | (void) map_read(map, adr); | 922 | (void) map_read(map, adr); |
910 | asm volatile (".rep 8; nop; .endr"); | 923 | asm volatile (".rep 8; nop; .endr"); |
911 | local_irq_enable(); | 924 | local_irq_enable(); |
912 | preempt_enable(); | 925 | spin_unlock(chip->mutex); |
913 | asm volatile (".rep 8; nop; .endr"); | 926 | asm volatile (".rep 8; nop; .endr"); |
914 | cond_resched(); | 927 | cond_resched(); |
915 | 928 | ||
@@ -919,15 +932,15 @@ static void __xipram xip_udelay(struct map_info *map, struct flchip *chip, | |||
919 | * a suspended erase state. If so let's wait | 932 | * a suspended erase state. If so let's wait |
920 | * until it's done. | 933 | * until it's done. |
921 | */ | 934 | */ |
922 | preempt_disable(); | 935 | spin_lock(chip->mutex); |
923 | while (chip->state != newstate) { | 936 | while (chip->state != newstate) { |
924 | DECLARE_WAITQUEUE(wait, current); | 937 | DECLARE_WAITQUEUE(wait, current); |
925 | set_current_state(TASK_UNINTERRUPTIBLE); | 938 | set_current_state(TASK_UNINTERRUPTIBLE); |
926 | add_wait_queue(&chip->wq, &wait); | 939 | add_wait_queue(&chip->wq, &wait); |
927 | preempt_enable(); | 940 | spin_unlock(chip->mutex); |
928 | schedule(); | 941 | schedule(); |
929 | remove_wait_queue(&chip->wq, &wait); | 942 | remove_wait_queue(&chip->wq, &wait); |
930 | preempt_disable(); | 943 | spin_lock(chip->mutex); |
931 | } | 944 | } |
932 | /* Disallow XIP again */ | 945 | /* Disallow XIP again */ |
933 | local_irq_disable(); | 946 | local_irq_disable(); |
@@ -956,12 +969,14 @@ static void __xipram xip_udelay(struct map_info *map, struct flchip *chip, | |||
956 | * The INVALIDATE_CACHED_RANGE() macro is normally used in parallel while | 969 | * The INVALIDATE_CACHED_RANGE() macro is normally used in parallel while |
957 | * the flash is actively programming or erasing since we have to poll for | 970 | * the flash is actively programming or erasing since we have to poll for |
958 | * the operation to complete anyway. We can't do that in a generic way with | 971 | * the operation to complete anyway. We can't do that in a generic way with |
959 | * a XIP setup so do it before the actual flash operation in this case. | 972 | * a XIP setup so do it before the actual flash operation in this case |
973 | * and stub it out from INVALIDATE_CACHE_UDELAY. | ||
960 | */ | 974 | */ |
961 | #undef INVALIDATE_CACHED_RANGE | 975 | #define XIP_INVAL_CACHED_RANGE(map, from, size) \ |
962 | #define INVALIDATE_CACHED_RANGE(x...) | 976 | INVALIDATE_CACHED_RANGE(map, from, size) |
963 | #define XIP_INVAL_CACHED_RANGE(map, from, size) \ | 977 | |
964 | do { if(map->inval_cache) map->inval_cache(map, from, size); } while(0) | 978 | #define INVALIDATE_CACHE_UDELAY(map, chip, adr, len, usec) \ |
979 | UDELAY(map, chip, adr, usec) | ||
965 | 980 | ||
966 | /* | 981 | /* |
967 | * Extra notes: | 982 | * Extra notes: |
@@ -984,11 +999,23 @@ static void __xipram xip_udelay(struct map_info *map, struct flchip *chip, | |||
984 | 999 | ||
985 | #define xip_disable(map, chip, adr) | 1000 | #define xip_disable(map, chip, adr) |
986 | #define xip_enable(map, chip, adr) | 1001 | #define xip_enable(map, chip, adr) |
987 | |||
988 | #define UDELAY(map, chip, adr, usec) cfi_udelay(usec) | ||
989 | |||
990 | #define XIP_INVAL_CACHED_RANGE(x...) | 1002 | #define XIP_INVAL_CACHED_RANGE(x...) |
991 | 1003 | ||
1004 | #define UDELAY(map, chip, adr, usec) \ | ||
1005 | do { \ | ||
1006 | spin_unlock(chip->mutex); \ | ||
1007 | cfi_udelay(usec); \ | ||
1008 | spin_lock(chip->mutex); \ | ||
1009 | } while (0) | ||
1010 | |||
1011 | #define INVALIDATE_CACHE_UDELAY(map, chip, adr, len, usec) \ | ||
1012 | do { \ | ||
1013 | spin_unlock(chip->mutex); \ | ||
1014 | INVALIDATE_CACHED_RANGE(map, adr, len); \ | ||
1015 | cfi_udelay(usec); \ | ||
1016 | spin_lock(chip->mutex); \ | ||
1017 | } while (0) | ||
1018 | |||
992 | #endif | 1019 | #endif |
993 | 1020 | ||
994 | static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t adr, size_t len) | 1021 | static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t adr, size_t len) |
@@ -1176,111 +1203,11 @@ static int cfi_intelext_read (struct mtd_info *mtd, loff_t from, size_t len, siz | |||
1176 | return ret; | 1203 | return ret; |
1177 | } | 1204 | } |
1178 | 1205 | ||
1179 | #if 0 | ||
1180 | static int __xipram cfi_intelext_read_prot_reg (struct mtd_info *mtd, | ||
1181 | loff_t from, size_t len, | ||
1182 | size_t *retlen, | ||
1183 | u_char *buf, | ||
1184 | int base_offst, int reg_sz) | ||
1185 | { | ||
1186 | struct map_info *map = mtd->priv; | ||
1187 | struct cfi_private *cfi = map->fldrv_priv; | ||
1188 | struct cfi_pri_intelext *extp = cfi->cmdset_priv; | ||
1189 | struct flchip *chip; | ||
1190 | int ofs_factor = cfi->interleave * cfi->device_type; | ||
1191 | int count = len; | ||
1192 | int chip_num, offst; | ||
1193 | int ret; | ||
1194 | |||
1195 | chip_num = ((unsigned int)from/reg_sz); | ||
1196 | offst = from - (reg_sz*chip_num)+base_offst; | ||
1197 | |||
1198 | while (count) { | ||
1199 | /* Calculate which chip & protection register offset we need */ | ||
1200 | |||
1201 | if (chip_num >= cfi->numchips) | ||
1202 | goto out; | ||
1203 | |||
1204 | chip = &cfi->chips[chip_num]; | ||
1205 | |||
1206 | spin_lock(chip->mutex); | ||
1207 | ret = get_chip(map, chip, chip->start, FL_JEDEC_QUERY); | ||
1208 | if (ret) { | ||
1209 | spin_unlock(chip->mutex); | ||
1210 | return (len-count)?:ret; | ||
1211 | } | ||
1212 | |||
1213 | xip_disable(map, chip, chip->start); | ||
1214 | |||
1215 | if (chip->state != FL_JEDEC_QUERY) { | ||
1216 | map_write(map, CMD(0x90), chip->start); | ||
1217 | chip->state = FL_JEDEC_QUERY; | ||
1218 | } | ||
1219 | |||
1220 | while (count && ((offst-base_offst) < reg_sz)) { | ||
1221 | *buf = map_read8(map,(chip->start+((extp->ProtRegAddr+1)*ofs_factor)+offst)); | ||
1222 | buf++; | ||
1223 | offst++; | ||
1224 | count--; | ||
1225 | } | ||
1226 | |||
1227 | xip_enable(map, chip, chip->start); | ||
1228 | put_chip(map, chip, chip->start); | ||
1229 | spin_unlock(chip->mutex); | ||
1230 | |||
1231 | /* Move on to the next chip */ | ||
1232 | chip_num++; | ||
1233 | offst = base_offst; | ||
1234 | } | ||
1235 | |||
1236 | out: | ||
1237 | return len-count; | ||
1238 | } | ||
1239 | |||
1240 | static int cfi_intelext_read_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) | ||
1241 | { | ||
1242 | struct map_info *map = mtd->priv; | ||
1243 | struct cfi_private *cfi = map->fldrv_priv; | ||
1244 | struct cfi_pri_intelext *extp=cfi->cmdset_priv; | ||
1245 | int base_offst,reg_sz; | ||
1246 | |||
1247 | /* Check that we actually have some protection registers */ | ||
1248 | if(!extp || !(extp->FeatureSupport&64)){ | ||
1249 | printk(KERN_WARNING "%s: This flash device has no protection data to read!\n",map->name); | ||
1250 | return 0; | ||
1251 | } | ||
1252 | |||
1253 | base_offst=(1<<extp->FactProtRegSize); | ||
1254 | reg_sz=(1<<extp->UserProtRegSize); | ||
1255 | |||
1256 | return cfi_intelext_read_prot_reg(mtd, from, len, retlen, buf, base_offst, reg_sz); | ||
1257 | } | ||
1258 | |||
1259 | static int cfi_intelext_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) | ||
1260 | { | ||
1261 | struct map_info *map = mtd->priv; | ||
1262 | struct cfi_private *cfi = map->fldrv_priv; | ||
1263 | struct cfi_pri_intelext *extp=cfi->cmdset_priv; | ||
1264 | int base_offst,reg_sz; | ||
1265 | |||
1266 | /* Check that we actually have some protection registers */ | ||
1267 | if(!extp || !(extp->FeatureSupport&64)){ | ||
1268 | printk(KERN_WARNING "%s: This flash device has no protection data to read!\n",map->name); | ||
1269 | return 0; | ||
1270 | } | ||
1271 | |||
1272 | base_offst=0; | ||
1273 | reg_sz=(1<<extp->FactProtRegSize); | ||
1274 | |||
1275 | return cfi_intelext_read_prot_reg(mtd, from, len, retlen, buf, base_offst, reg_sz); | ||
1276 | } | ||
1277 | #endif | ||
1278 | |||
1279 | static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, | 1206 | static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, |
1280 | unsigned long adr, map_word datum) | 1207 | unsigned long adr, map_word datum, int mode) |
1281 | { | 1208 | { |
1282 | struct cfi_private *cfi = map->fldrv_priv; | 1209 | struct cfi_private *cfi = map->fldrv_priv; |
1283 | map_word status, status_OK; | 1210 | map_word status, status_OK, write_cmd; |
1284 | unsigned long timeo; | 1211 | unsigned long timeo; |
1285 | int z, ret=0; | 1212 | int z, ret=0; |
1286 | 1213 | ||
@@ -1288,9 +1215,14 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, | |||
1288 | 1215 | ||
1289 | /* Let's determine this according to the interleave only once */ | 1216 | /* Let's determine this according to the interleave only once */ |
1290 | status_OK = CMD(0x80); | 1217 | status_OK = CMD(0x80); |
1218 | switch (mode) { | ||
1219 | case FL_WRITING: write_cmd = CMD(0x40); break; | ||
1220 | case FL_OTP_WRITE: write_cmd = CMD(0xc0); break; | ||
1221 | default: return -EINVAL; | ||
1222 | } | ||
1291 | 1223 | ||
1292 | spin_lock(chip->mutex); | 1224 | spin_lock(chip->mutex); |
1293 | ret = get_chip(map, chip, adr, FL_WRITING); | 1225 | ret = get_chip(map, chip, adr, mode); |
1294 | if (ret) { | 1226 | if (ret) { |
1295 | spin_unlock(chip->mutex); | 1227 | spin_unlock(chip->mutex); |
1296 | return ret; | 1228 | return ret; |
@@ -1299,19 +1231,18 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, | |||
1299 | XIP_INVAL_CACHED_RANGE(map, adr, map_bankwidth(map)); | 1231 | XIP_INVAL_CACHED_RANGE(map, adr, map_bankwidth(map)); |
1300 | ENABLE_VPP(map); | 1232 | ENABLE_VPP(map); |
1301 | xip_disable(map, chip, adr); | 1233 | xip_disable(map, chip, adr); |
1302 | map_write(map, CMD(0x40), adr); | 1234 | map_write(map, write_cmd, adr); |
1303 | map_write(map, datum, adr); | 1235 | map_write(map, datum, adr); |
1304 | chip->state = FL_WRITING; | 1236 | chip->state = mode; |
1305 | 1237 | ||
1306 | spin_unlock(chip->mutex); | 1238 | INVALIDATE_CACHE_UDELAY(map, chip, |
1307 | INVALIDATE_CACHED_RANGE(map, adr, map_bankwidth(map)); | 1239 | adr, map_bankwidth(map), |
1308 | UDELAY(map, chip, adr, chip->word_write_time); | 1240 | chip->word_write_time); |
1309 | spin_lock(chip->mutex); | ||
1310 | 1241 | ||
1311 | timeo = jiffies + (HZ/2); | 1242 | timeo = jiffies + (HZ/2); |
1312 | z = 0; | 1243 | z = 0; |
1313 | for (;;) { | 1244 | for (;;) { |
1314 | if (chip->state != FL_WRITING) { | 1245 | if (chip->state != mode) { |
1315 | /* Someone's suspended the write. Sleep */ | 1246 | /* Someone's suspended the write. Sleep */ |
1316 | DECLARE_WAITQUEUE(wait, current); | 1247 | DECLARE_WAITQUEUE(wait, current); |
1317 | 1248 | ||
@@ -1339,10 +1270,8 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, | |||
1339 | } | 1270 | } |
1340 | 1271 | ||
1341 | /* Latency issues. Drop the lock, wait a while and retry */ | 1272 | /* Latency issues. Drop the lock, wait a while and retry */ |
1342 | spin_unlock(chip->mutex); | ||
1343 | z++; | 1273 | z++; |
1344 | UDELAY(map, chip, adr, 1); | 1274 | UDELAY(map, chip, adr, 1); |
1345 | spin_lock(chip->mutex); | ||
1346 | } | 1275 | } |
1347 | if (!z) { | 1276 | if (!z) { |
1348 | chip->word_write_time--; | 1277 | chip->word_write_time--; |
@@ -1399,7 +1328,7 @@ static int cfi_intelext_write_words (struct mtd_info *mtd, loff_t to , size_t le | |||
1399 | datum = map_word_load_partial(map, datum, buf, gap, n); | 1328 | datum = map_word_load_partial(map, datum, buf, gap, n); |
1400 | 1329 | ||
1401 | ret = do_write_oneword(map, &cfi->chips[chipnum], | 1330 | ret = do_write_oneword(map, &cfi->chips[chipnum], |
1402 | bus_ofs, datum); | 1331 | bus_ofs, datum, FL_WRITING); |
1403 | if (ret) | 1332 | if (ret) |
1404 | return ret; | 1333 | return ret; |
1405 | 1334 | ||
@@ -1420,7 +1349,7 @@ static int cfi_intelext_write_words (struct mtd_info *mtd, loff_t to , size_t le | |||
1420 | map_word datum = map_word_load(map, buf); | 1349 | map_word datum = map_word_load(map, buf); |
1421 | 1350 | ||
1422 | ret = do_write_oneword(map, &cfi->chips[chipnum], | 1351 | ret = do_write_oneword(map, &cfi->chips[chipnum], |
1423 | ofs, datum); | 1352 | ofs, datum, FL_WRITING); |
1424 | if (ret) | 1353 | if (ret) |
1425 | return ret; | 1354 | return ret; |
1426 | 1355 | ||
@@ -1444,7 +1373,7 @@ static int cfi_intelext_write_words (struct mtd_info *mtd, loff_t to , size_t le | |||
1444 | datum = map_word_load_partial(map, datum, buf, 0, len); | 1373 | datum = map_word_load_partial(map, datum, buf, 0, len); |
1445 | 1374 | ||
1446 | ret = do_write_oneword(map, &cfi->chips[chipnum], | 1375 | ret = do_write_oneword(map, &cfi->chips[chipnum], |
1447 | ofs, datum); | 1376 | ofs, datum, FL_WRITING); |
1448 | if (ret) | 1377 | if (ret) |
1449 | return ret; | 1378 | return ret; |
1450 | 1379 | ||
@@ -1506,9 +1435,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, | |||
1506 | if (map_word_andequal(map, status, status_OK, status_OK)) | 1435 | if (map_word_andequal(map, status, status_OK, status_OK)) |
1507 | break; | 1436 | break; |
1508 | 1437 | ||
1509 | spin_unlock(chip->mutex); | ||
1510 | UDELAY(map, chip, cmd_adr, 1); | 1438 | UDELAY(map, chip, cmd_adr, 1); |
1511 | spin_lock(chip->mutex); | ||
1512 | 1439 | ||
1513 | if (++z > 20) { | 1440 | if (++z > 20) { |
1514 | /* Argh. Not ready for write to buffer */ | 1441 | /* Argh. Not ready for write to buffer */ |
@@ -1554,10 +1481,9 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, | |||
1554 | map_write(map, CMD(0xd0), cmd_adr); | 1481 | map_write(map, CMD(0xd0), cmd_adr); |
1555 | chip->state = FL_WRITING; | 1482 | chip->state = FL_WRITING; |
1556 | 1483 | ||
1557 | spin_unlock(chip->mutex); | 1484 | INVALIDATE_CACHE_UDELAY(map, chip, |
1558 | INVALIDATE_CACHED_RANGE(map, adr, len); | 1485 | cmd_adr, len, |
1559 | UDELAY(map, chip, cmd_adr, chip->buffer_write_time); | 1486 | chip->buffer_write_time); |
1560 | spin_lock(chip->mutex); | ||
1561 | 1487 | ||
1562 | timeo = jiffies + (HZ/2); | 1488 | timeo = jiffies + (HZ/2); |
1563 | z = 0; | 1489 | z = 0; |
@@ -1589,10 +1515,8 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, | |||
1589 | } | 1515 | } |
1590 | 1516 | ||
1591 | /* Latency issues. Drop the lock, wait a while and retry */ | 1517 | /* Latency issues. Drop the lock, wait a while and retry */ |
1592 | spin_unlock(chip->mutex); | ||
1593 | UDELAY(map, chip, cmd_adr, 1); | ||
1594 | z++; | 1518 | z++; |
1595 | spin_lock(chip->mutex); | 1519 | UDELAY(map, chip, cmd_adr, 1); |
1596 | } | 1520 | } |
1597 | if (!z) { | 1521 | if (!z) { |
1598 | chip->buffer_write_time--; | 1522 | chip->buffer_write_time--; |
@@ -1720,10 +1644,9 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, | |||
1720 | chip->state = FL_ERASING; | 1644 | chip->state = FL_ERASING; |
1721 | chip->erase_suspended = 0; | 1645 | chip->erase_suspended = 0; |
1722 | 1646 | ||
1723 | spin_unlock(chip->mutex); | 1647 | INVALIDATE_CACHE_UDELAY(map, chip, |
1724 | INVALIDATE_CACHED_RANGE(map, adr, len); | 1648 | adr, len, |
1725 | UDELAY(map, chip, adr, chip->erase_time*1000/2); | 1649 | chip->erase_time*1000/2); |
1726 | spin_lock(chip->mutex); | ||
1727 | 1650 | ||
1728 | /* FIXME. Use a timer to check this, and return immediately. */ | 1651 | /* FIXME. Use a timer to check this, and return immediately. */ |
1729 | /* Once the state machine's known to be working I'll do that */ | 1652 | /* Once the state machine's known to be working I'll do that */ |
@@ -1768,9 +1691,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, | |||
1768 | } | 1691 | } |
1769 | 1692 | ||
1770 | /* Latency issues. Drop the lock, wait a while and retry */ | 1693 | /* Latency issues. Drop the lock, wait a while and retry */ |
1771 | spin_unlock(chip->mutex); | ||
1772 | UDELAY(map, chip, adr, 1000000/HZ); | 1694 | UDELAY(map, chip, adr, 1000000/HZ); |
1773 | spin_lock(chip->mutex); | ||
1774 | } | 1695 | } |
1775 | 1696 | ||
1776 | /* We've broken this before. It doesn't hurt to be safe */ | 1697 | /* We've broken this before. It doesn't hurt to be safe */ |
@@ -1780,44 +1701,34 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, | |||
1780 | 1701 | ||
1781 | /* check for lock bit */ | 1702 | /* check for lock bit */ |
1782 | if (map_word_bitsset(map, status, CMD(0x3a))) { | 1703 | if (map_word_bitsset(map, status, CMD(0x3a))) { |
1783 | unsigned char chipstatus; | 1704 | unsigned long chipstatus; |
1784 | 1705 | ||
1785 | /* Reset the error bits */ | 1706 | /* Reset the error bits */ |
1786 | map_write(map, CMD(0x50), adr); | 1707 | map_write(map, CMD(0x50), adr); |
1787 | map_write(map, CMD(0x70), adr); | 1708 | map_write(map, CMD(0x70), adr); |
1788 | xip_enable(map, chip, adr); | 1709 | xip_enable(map, chip, adr); |
1789 | 1710 | ||
1790 | chipstatus = status.x[0]; | 1711 | chipstatus = MERGESTATUS(status); |
1791 | if (!map_word_equal(map, status, CMD(chipstatus))) { | ||
1792 | int i, w; | ||
1793 | for (w=0; w<map_words(map); w++) { | ||
1794 | for (i = 0; i<cfi_interleave(cfi); i++) { | ||
1795 | chipstatus |= status.x[w] >> (cfi->device_type * 8); | ||
1796 | } | ||
1797 | } | ||
1798 | printk(KERN_WARNING "Status is not identical for all chips: 0x%lx. Merging to give 0x%02x\n", | ||
1799 | status.x[0], chipstatus); | ||
1800 | } | ||
1801 | 1712 | ||
1802 | if ((chipstatus & 0x30) == 0x30) { | 1713 | if ((chipstatus & 0x30) == 0x30) { |
1803 | printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%x\n", chipstatus); | 1714 | printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%lx\n", chipstatus); |
1804 | ret = -EIO; | 1715 | ret = -EIO; |
1805 | } else if (chipstatus & 0x02) { | 1716 | } else if (chipstatus & 0x02) { |
1806 | /* Protection bit set */ | 1717 | /* Protection bit set */ |
1807 | ret = -EROFS; | 1718 | ret = -EROFS; |
1808 | } else if (chipstatus & 0x8) { | 1719 | } else if (chipstatus & 0x8) { |
1809 | /* Voltage */ | 1720 | /* Voltage */ |
1810 | printk(KERN_WARNING "Chip reports voltage low on erase: status 0x%x\n", chipstatus); | 1721 | printk(KERN_WARNING "Chip reports voltage low on erase: status 0x%lx\n", chipstatus); |
1811 | ret = -EIO; | 1722 | ret = -EIO; |
1812 | } else if (chipstatus & 0x20) { | 1723 | } else if (chipstatus & 0x20) { |
1813 | if (retries--) { | 1724 | if (retries--) { |
1814 | printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x. Retrying...\n", adr, chipstatus); | 1725 | printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%lx. Retrying...\n", adr, chipstatus); |
1815 | timeo = jiffies + HZ; | 1726 | timeo = jiffies + HZ; |
1816 | put_chip(map, chip, adr); | 1727 | put_chip(map, chip, adr); |
1817 | spin_unlock(chip->mutex); | 1728 | spin_unlock(chip->mutex); |
1818 | goto retry; | 1729 | goto retry; |
1819 | } | 1730 | } |
1820 | printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x\n", adr, chipstatus); | 1731 | printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%lx\n", adr, chipstatus); |
1821 | ret = -EIO; | 1732 | ret = -EIO; |
1822 | } | 1733 | } |
1823 | } else { | 1734 | } else { |
@@ -1882,6 +1793,7 @@ static void cfi_intelext_sync (struct mtd_info *mtd) | |||
1882 | 1793 | ||
1883 | if (chip->state == FL_SYNCING) { | 1794 | if (chip->state == FL_SYNCING) { |
1884 | chip->state = chip->oldstate; | 1795 | chip->state = chip->oldstate; |
1796 | chip->oldstate = FL_READY; | ||
1885 | wake_up(&chip->wq); | 1797 | wake_up(&chip->wq); |
1886 | } | 1798 | } |
1887 | spin_unlock(chip->mutex); | 1799 | spin_unlock(chip->mutex); |
@@ -1897,8 +1809,9 @@ static int __xipram do_printlockstatus_oneblock(struct map_info *map, | |||
1897 | struct cfi_private *cfi = map->fldrv_priv; | 1809 | struct cfi_private *cfi = map->fldrv_priv; |
1898 | int status, ofs_factor = cfi->interleave * cfi->device_type; | 1810 | int status, ofs_factor = cfi->interleave * cfi->device_type; |
1899 | 1811 | ||
1812 | adr += chip->start; | ||
1900 | xip_disable(map, chip, adr+(2*ofs_factor)); | 1813 | xip_disable(map, chip, adr+(2*ofs_factor)); |
1901 | cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL); | 1814 | map_write(map, CMD(0x90), adr+(2*ofs_factor)); |
1902 | chip->state = FL_JEDEC_QUERY; | 1815 | chip->state = FL_JEDEC_QUERY; |
1903 | status = cfi_read_query(map, adr+(2*ofs_factor)); | 1816 | status = cfi_read_query(map, adr+(2*ofs_factor)); |
1904 | xip_enable(map, chip, 0); | 1817 | xip_enable(map, chip, 0); |
@@ -1915,6 +1828,7 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip | |||
1915 | unsigned long adr, int len, void *thunk) | 1828 | unsigned long adr, int len, void *thunk) |
1916 | { | 1829 | { |
1917 | struct cfi_private *cfi = map->fldrv_priv; | 1830 | struct cfi_private *cfi = map->fldrv_priv; |
1831 | struct cfi_pri_intelext *extp = cfi->cmdset_priv; | ||
1918 | map_word status, status_OK; | 1832 | map_word status, status_OK; |
1919 | unsigned long timeo = jiffies + HZ; | 1833 | unsigned long timeo = jiffies + HZ; |
1920 | int ret; | 1834 | int ret; |
@@ -1944,9 +1858,13 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip | |||
1944 | } else | 1858 | } else |
1945 | BUG(); | 1859 | BUG(); |
1946 | 1860 | ||
1947 | spin_unlock(chip->mutex); | 1861 | /* |
1948 | UDELAY(map, chip, adr, 1000000/HZ); | 1862 | * If Instant Individual Block Locking supported then no need |
1949 | spin_lock(chip->mutex); | 1863 | * to delay. |
1864 | */ | ||
1865 | |||
1866 | if (!extp || !(extp->FeatureSupport & (1 << 5))) | ||
1867 | UDELAY(map, chip, adr, 1000000/HZ); | ||
1950 | 1868 | ||
1951 | /* FIXME. Use a timer to check this, and return immediately. */ | 1869 | /* FIXME. Use a timer to check this, and return immediately. */ |
1952 | /* Once the state machine's known to be working I'll do that */ | 1870 | /* Once the state machine's known to be working I'll do that */ |
@@ -1973,9 +1891,7 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip | |||
1973 | } | 1891 | } |
1974 | 1892 | ||
1975 | /* Latency issues. Drop the lock, wait a while and retry */ | 1893 | /* Latency issues. Drop the lock, wait a while and retry */ |
1976 | spin_unlock(chip->mutex); | ||
1977 | UDELAY(map, chip, adr, 1); | 1894 | UDELAY(map, chip, adr, 1); |
1978 | spin_lock(chip->mutex); | ||
1979 | } | 1895 | } |
1980 | 1896 | ||
1981 | /* Done and happy. */ | 1897 | /* Done and happy. */ |
@@ -2034,6 +1950,274 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len) | |||
2034 | return ret; | 1950 | return ret; |
2035 | } | 1951 | } |
2036 | 1952 | ||
1953 | #ifdef CONFIG_MTD_OTP | ||
1954 | |||
1955 | typedef int (*otp_op_t)(struct map_info *map, struct flchip *chip, | ||
1956 | u_long data_offset, u_char *buf, u_int size, | ||
1957 | u_long prot_offset, u_int groupno, u_int groupsize); | ||
1958 | |||
1959 | static int __xipram | ||
1960 | do_otp_read(struct map_info *map, struct flchip *chip, u_long offset, | ||
1961 | u_char *buf, u_int size, u_long prot, u_int grpno, u_int grpsz) | ||
1962 | { | ||
1963 | struct cfi_private *cfi = map->fldrv_priv; | ||
1964 | int ret; | ||
1965 | |||
1966 | spin_lock(chip->mutex); | ||
1967 | ret = get_chip(map, chip, chip->start, FL_JEDEC_QUERY); | ||
1968 | if (ret) { | ||
1969 | spin_unlock(chip->mutex); | ||
1970 | return ret; | ||
1971 | } | ||
1972 | |||
1973 | /* let's ensure we're not reading back cached data from array mode */ | ||
1974 | INVALIDATE_CACHED_RANGE(map, chip->start + offset, size); | ||
1975 | |||
1976 | xip_disable(map, chip, chip->start); | ||
1977 | if (chip->state != FL_JEDEC_QUERY) { | ||
1978 | map_write(map, CMD(0x90), chip->start); | ||
1979 | chip->state = FL_JEDEC_QUERY; | ||
1980 | } | ||
1981 | map_copy_from(map, buf, chip->start + offset, size); | ||
1982 | xip_enable(map, chip, chip->start); | ||
1983 | |||
1984 | /* then ensure we don't keep OTP data in the cache */ | ||
1985 | INVALIDATE_CACHED_RANGE(map, chip->start + offset, size); | ||
1986 | |||
1987 | put_chip(map, chip, chip->start); | ||
1988 | spin_unlock(chip->mutex); | ||
1989 | return 0; | ||
1990 | } | ||
1991 | |||
1992 | static int | ||
1993 | do_otp_write(struct map_info *map, struct flchip *chip, u_long offset, | ||
1994 | u_char *buf, u_int size, u_long prot, u_int grpno, u_int grpsz) | ||
1995 | { | ||
1996 | int ret; | ||
1997 | |||
1998 | while (size) { | ||
1999 | unsigned long bus_ofs = offset & ~(map_bankwidth(map)-1); | ||
2000 | int gap = offset - bus_ofs; | ||
2001 | int n = min_t(int, size, map_bankwidth(map)-gap); | ||
2002 | map_word datum = map_word_ff(map); | ||
2003 | |||
2004 | datum = map_word_load_partial(map, datum, buf, gap, n); | ||
2005 | ret = do_write_oneword(map, chip, bus_ofs, datum, FL_OTP_WRITE); | ||
2006 | if (ret) | ||
2007 | return ret; | ||
2008 | |||
2009 | offset += n; | ||
2010 | buf += n; | ||
2011 | size -= n; | ||
2012 | } | ||
2013 | |||
2014 | return 0; | ||
2015 | } | ||
2016 | |||
2017 | static int | ||
2018 | do_otp_lock(struct map_info *map, struct flchip *chip, u_long offset, | ||
2019 | u_char *buf, u_int size, u_long prot, u_int grpno, u_int grpsz) | ||
2020 | { | ||
2021 | struct cfi_private *cfi = map->fldrv_priv; | ||
2022 | map_word datum; | ||
2023 | |||
2024 | /* make sure area matches group boundaries */ | ||
2025 | if (size != grpsz) | ||
2026 | return -EXDEV; | ||
2027 | |||
2028 | datum = map_word_ff(map); | ||
2029 | datum = map_word_clr(map, datum, CMD(1 << grpno)); | ||
2030 | return do_write_oneword(map, chip, prot, datum, FL_OTP_WRITE); | ||
2031 | } | ||
2032 | |||
2033 | static int cfi_intelext_otp_walk(struct mtd_info *mtd, loff_t from, size_t len, | ||
2034 | size_t *retlen, u_char *buf, | ||
2035 | otp_op_t action, int user_regs) | ||
2036 | { | ||
2037 | struct map_info *map = mtd->priv; | ||
2038 | struct cfi_private *cfi = map->fldrv_priv; | ||
2039 | struct cfi_pri_intelext *extp = cfi->cmdset_priv; | ||
2040 | struct flchip *chip; | ||
2041 | struct cfi_intelext_otpinfo *otp; | ||
2042 | u_long devsize, reg_prot_offset, data_offset; | ||
2043 | u_int chip_num, chip_step, field, reg_fact_size, reg_user_size; | ||
2044 | u_int groups, groupno, groupsize, reg_fact_groups, reg_user_groups; | ||
2045 | int ret; | ||
2046 | |||
2047 | *retlen = 0; | ||
2048 | |||
2049 | /* Check that we actually have some OTP registers */ | ||
2050 | if (!extp || !(extp->FeatureSupport & 64) || !extp->NumProtectionFields) | ||
2051 | return -ENODATA; | ||
2052 | |||
2053 | /* we need real chips here not virtual ones */ | ||
2054 | devsize = (1 << cfi->cfiq->DevSize) * cfi->interleave; | ||
2055 | chip_step = devsize >> cfi->chipshift; | ||
2056 | chip_num = 0; | ||
2057 | |||
2058 | /* Some chips have OTP located in the _top_ partition only. | ||
2059 | For example: Intel 28F256L18T (T means top-parameter device) */ | ||
2060 | if (cfi->mfr == MANUFACTURER_INTEL) { | ||
2061 | switch (cfi->id) { | ||
2062 | case 0x880b: | ||
2063 | case 0x880c: | ||
2064 | case 0x880d: | ||
2065 | chip_num = chip_step - 1; | ||
2066 | } | ||
2067 | } | ||
2068 | |||
2069 | for ( ; chip_num < cfi->numchips; chip_num += chip_step) { | ||
2070 | chip = &cfi->chips[chip_num]; | ||
2071 | otp = (struct cfi_intelext_otpinfo *)&extp->extra[0]; | ||
2072 | |||
2073 | /* first OTP region */ | ||
2074 | field = 0; | ||
2075 | reg_prot_offset = extp->ProtRegAddr; | ||
2076 | reg_fact_groups = 1; | ||
2077 | reg_fact_size = 1 << extp->FactProtRegSize; | ||
2078 | reg_user_groups = 1; | ||
2079 | reg_user_size = 1 << extp->UserProtRegSize; | ||
2080 | |||
2081 | while (len > 0) { | ||
2082 | /* flash geometry fixup */ | ||
2083 | data_offset = reg_prot_offset + 1; | ||
2084 | data_offset *= cfi->interleave * cfi->device_type; | ||
2085 | reg_prot_offset *= cfi->interleave * cfi->device_type; | ||
2086 | reg_fact_size *= cfi->interleave; | ||
2087 | reg_user_size *= cfi->interleave; | ||
2088 | |||
2089 | if (user_regs) { | ||
2090 | groups = reg_user_groups; | ||
2091 | groupsize = reg_user_size; | ||
2092 | /* skip over factory reg area */ | ||
2093 | groupno = reg_fact_groups; | ||
2094 | data_offset += reg_fact_groups * reg_fact_size; | ||
2095 | } else { | ||
2096 | groups = reg_fact_groups; | ||
2097 | groupsize = reg_fact_size; | ||
2098 | groupno = 0; | ||
2099 | } | ||
2100 | |||
2101 | while (len > 0 && groups > 0) { | ||
2102 | if (!action) { | ||
2103 | /* | ||
2104 | * Special case: if action is NULL | ||
2105 | * we fill buf with otp_info records. | ||
2106 | */ | ||
2107 | struct otp_info *otpinfo; | ||
2108 | map_word lockword; | ||
2109 | len -= sizeof(struct otp_info); | ||
2110 | if (len <= 0) | ||
2111 | return -ENOSPC; | ||
2112 | ret = do_otp_read(map, chip, | ||
2113 | reg_prot_offset, | ||
2114 | (u_char *)&lockword, | ||
2115 | map_bankwidth(map), | ||
2116 | 0, 0, 0); | ||
2117 | if (ret) | ||
2118 | return ret; | ||
2119 | otpinfo = (struct otp_info *)buf; | ||
2120 | otpinfo->start = from; | ||
2121 | otpinfo->length = groupsize; | ||
2122 | otpinfo->locked = | ||
2123 | !map_word_bitsset(map, lockword, | ||
2124 | CMD(1 << groupno)); | ||
2125 | from += groupsize; | ||
2126 | buf += sizeof(*otpinfo); | ||
2127 | *retlen += sizeof(*otpinfo); | ||
2128 | } else if (from >= groupsize) { | ||
2129 | from -= groupsize; | ||
2130 | data_offset += groupsize; | ||
2131 | } else { | ||
2132 | int size = groupsize; | ||
2133 | data_offset += from; | ||
2134 | size -= from; | ||
2135 | from = 0; | ||
2136 | if (size > len) | ||
2137 | size = len; | ||
2138 | ret = action(map, chip, data_offset, | ||
2139 | buf, size, reg_prot_offset, | ||
2140 | groupno, groupsize); | ||
2141 | if (ret < 0) | ||
2142 | return ret; | ||
2143 | buf += size; | ||
2144 | len -= size; | ||
2145 | *retlen += size; | ||
2146 | data_offset += size; | ||
2147 | } | ||
2148 | groupno++; | ||
2149 | groups--; | ||
2150 | } | ||
2151 | |||
2152 | /* next OTP region */ | ||
2153 | if (++field == extp->NumProtectionFields) | ||
2154 | break; | ||
2155 | reg_prot_offset = otp->ProtRegAddr; | ||
2156 | reg_fact_groups = otp->FactGroups; | ||
2157 | reg_fact_size = 1 << otp->FactProtRegSize; | ||
2158 | reg_user_groups = otp->UserGroups; | ||
2159 | reg_user_size = 1 << otp->UserProtRegSize; | ||
2160 | otp++; | ||
2161 | } | ||
2162 | } | ||
2163 | |||
2164 | return 0; | ||
2165 | } | ||
2166 | |||
2167 | static int cfi_intelext_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, | ||
2168 | size_t len, size_t *retlen, | ||
2169 | u_char *buf) | ||
2170 | { | ||
2171 | return cfi_intelext_otp_walk(mtd, from, len, retlen, | ||
2172 | buf, do_otp_read, 0); | ||
2173 | } | ||
2174 | |||
2175 | static int cfi_intelext_read_user_prot_reg(struct mtd_info *mtd, loff_t from, | ||
2176 | size_t len, size_t *retlen, | ||
2177 | u_char *buf) | ||
2178 | { | ||
2179 | return cfi_intelext_otp_walk(mtd, from, len, retlen, | ||
2180 | buf, do_otp_read, 1); | ||
2181 | } | ||
2182 | |||
2183 | static int cfi_intelext_write_user_prot_reg(struct mtd_info *mtd, loff_t from, | ||
2184 | size_t len, size_t *retlen, | ||
2185 | u_char *buf) | ||
2186 | { | ||
2187 | return cfi_intelext_otp_walk(mtd, from, len, retlen, | ||
2188 | buf, do_otp_write, 1); | ||
2189 | } | ||
2190 | |||
2191 | static int cfi_intelext_lock_user_prot_reg(struct mtd_info *mtd, | ||
2192 | loff_t from, size_t len) | ||
2193 | { | ||
2194 | size_t retlen; | ||
2195 | return cfi_intelext_otp_walk(mtd, from, len, &retlen, | ||
2196 | NULL, do_otp_lock, 1); | ||
2197 | } | ||
2198 | |||
2199 | static int cfi_intelext_get_fact_prot_info(struct mtd_info *mtd, | ||
2200 | struct otp_info *buf, size_t len) | ||
2201 | { | ||
2202 | size_t retlen; | ||
2203 | int ret; | ||
2204 | |||
2205 | ret = cfi_intelext_otp_walk(mtd, 0, len, &retlen, (u_char *)buf, NULL, 0); | ||
2206 | return ret ? : retlen; | ||
2207 | } | ||
2208 | |||
2209 | static int cfi_intelext_get_user_prot_info(struct mtd_info *mtd, | ||
2210 | struct otp_info *buf, size_t len) | ||
2211 | { | ||
2212 | size_t retlen; | ||
2213 | int ret; | ||
2214 | |||
2215 | ret = cfi_intelext_otp_walk(mtd, 0, len, &retlen, (u_char *)buf, NULL, 1); | ||
2216 | return ret ? : retlen; | ||
2217 | } | ||
2218 | |||
2219 | #endif | ||
2220 | |||
2037 | static int cfi_intelext_suspend(struct mtd_info *mtd) | 2221 | static int cfi_intelext_suspend(struct mtd_info *mtd) |
2038 | { | 2222 | { |
2039 | struct map_info *map = mtd->priv; | 2223 | struct map_info *map = mtd->priv; |
@@ -2125,10 +2309,46 @@ static void cfi_intelext_resume(struct mtd_info *mtd) | |||
2125 | } | 2309 | } |
2126 | } | 2310 | } |
2127 | 2311 | ||
2312 | static int cfi_intelext_reset(struct mtd_info *mtd) | ||
2313 | { | ||
2314 | struct map_info *map = mtd->priv; | ||
2315 | struct cfi_private *cfi = map->fldrv_priv; | ||
2316 | int i, ret; | ||
2317 | |||
2318 | for (i=0; i < cfi->numchips; i++) { | ||
2319 | struct flchip *chip = &cfi->chips[i]; | ||
2320 | |||
2321 | /* force the completion of any ongoing operation | ||
2322 | and switch to array mode so any bootloader in | ||
2323 | flash is accessible for soft reboot. */ | ||
2324 | spin_lock(chip->mutex); | ||
2325 | ret = get_chip(map, chip, chip->start, FL_SYNCING); | ||
2326 | if (!ret) { | ||
2327 | map_write(map, CMD(0xff), chip->start); | ||
2328 | chip->state = FL_READY; | ||
2329 | } | ||
2330 | spin_unlock(chip->mutex); | ||
2331 | } | ||
2332 | |||
2333 | return 0; | ||
2334 | } | ||
2335 | |||
2336 | static int cfi_intelext_reboot(struct notifier_block *nb, unsigned long val, | ||
2337 | void *v) | ||
2338 | { | ||
2339 | struct mtd_info *mtd; | ||
2340 | |||
2341 | mtd = container_of(nb, struct mtd_info, reboot_notifier); | ||
2342 | cfi_intelext_reset(mtd); | ||
2343 | return NOTIFY_DONE; | ||
2344 | } | ||
2345 | |||
2128 | static void cfi_intelext_destroy(struct mtd_info *mtd) | 2346 | static void cfi_intelext_destroy(struct mtd_info *mtd) |
2129 | { | 2347 | { |
2130 | struct map_info *map = mtd->priv; | 2348 | struct map_info *map = mtd->priv; |
2131 | struct cfi_private *cfi = map->fldrv_priv; | 2349 | struct cfi_private *cfi = map->fldrv_priv; |
2350 | cfi_intelext_reset(mtd); | ||
2351 | unregister_reboot_notifier(&mtd->reboot_notifier); | ||
2132 | kfree(cfi->cmdset_priv); | 2352 | kfree(cfi->cmdset_priv); |
2133 | kfree(cfi->cfiq); | 2353 | kfree(cfi->cfiq); |
2134 | kfree(cfi->chips[0].priv); | 2354 | kfree(cfi->chips[0].priv); |
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index fca8ff6f7e14..8505f118f2db 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c | |||
@@ -4,16 +4,20 @@ | |||
4 | * | 4 | * |
5 | * Copyright (C) 2000 Crossnet Co. <info@crossnet.co.jp> | 5 | * Copyright (C) 2000 Crossnet Co. <info@crossnet.co.jp> |
6 | * Copyright (C) 2004 Arcom Control Systems Ltd <linux@arcom.com> | 6 | * Copyright (C) 2004 Arcom Control Systems Ltd <linux@arcom.com> |
7 | * Copyright (C) 2005 MontaVista Software Inc. <source@mvista.com> | ||
7 | * | 8 | * |
8 | * 2_by_8 routines added by Simon Munton | 9 | * 2_by_8 routines added by Simon Munton |
9 | * | 10 | * |
10 | * 4_by_16 work by Carolyn J. Smith | 11 | * 4_by_16 work by Carolyn J. Smith |
11 | * | 12 | * |
13 | * XIP support hooks by Vitaly Wool (based on code for Intel flash | ||
14 | * by Nicolas Pitre) | ||
15 | * | ||
12 | * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com | 16 | * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com |
13 | * | 17 | * |
14 | * This code is GPL | 18 | * This code is GPL |
15 | * | 19 | * |
16 | * $Id: cfi_cmdset_0002.c,v 1.114 2004/12/11 15:43:53 dedekind Exp $ | 20 | * $Id: cfi_cmdset_0002.c,v 1.118 2005/07/04 22:34:29 gleixner Exp $ |
17 | * | 21 | * |
18 | */ | 22 | */ |
19 | 23 | ||
@@ -34,6 +38,7 @@ | |||
34 | #include <linux/mtd/map.h> | 38 | #include <linux/mtd/map.h> |
35 | #include <linux/mtd/mtd.h> | 39 | #include <linux/mtd/mtd.h> |
36 | #include <linux/mtd/cfi.h> | 40 | #include <linux/mtd/cfi.h> |
41 | #include <linux/mtd/xip.h> | ||
37 | 42 | ||
38 | #define AMD_BOOTLOC_BUG | 43 | #define AMD_BOOTLOC_BUG |
39 | #define FORCE_WORD_WRITE 0 | 44 | #define FORCE_WORD_WRITE 0 |
@@ -43,6 +48,7 @@ | |||
43 | #define MANUFACTURER_AMD 0x0001 | 48 | #define MANUFACTURER_AMD 0x0001 |
44 | #define MANUFACTURER_SST 0x00BF | 49 | #define MANUFACTURER_SST 0x00BF |
45 | #define SST49LF004B 0x0060 | 50 | #define SST49LF004B 0x0060 |
51 | #define SST49LF008A 0x005a | ||
46 | 52 | ||
47 | static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); | 53 | static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); |
48 | static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); | 54 | static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); |
@@ -191,6 +197,7 @@ static struct cfi_fixup cfi_fixup_table[] = { | |||
191 | }; | 197 | }; |
192 | static struct cfi_fixup jedec_fixup_table[] = { | 198 | static struct cfi_fixup jedec_fixup_table[] = { |
193 | { MANUFACTURER_SST, SST49LF004B, fixup_use_fwh_lock, NULL, }, | 199 | { MANUFACTURER_SST, SST49LF004B, fixup_use_fwh_lock, NULL, }, |
200 | { MANUFACTURER_SST, SST49LF008A, fixup_use_fwh_lock, NULL, }, | ||
194 | { 0, 0, NULL, NULL } | 201 | { 0, 0, NULL, NULL } |
195 | }; | 202 | }; |
196 | 203 | ||
@@ -391,7 +398,7 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd) | |||
391 | * correctly and is therefore not done (particulary with interleaved chips | 398 | * correctly and is therefore not done (particulary with interleaved chips |
392 | * as each chip must be checked independantly of the others). | 399 | * as each chip must be checked independantly of the others). |
393 | */ | 400 | */ |
394 | static int chip_ready(struct map_info *map, unsigned long addr) | 401 | static int __xipram chip_ready(struct map_info *map, unsigned long addr) |
395 | { | 402 | { |
396 | map_word d, t; | 403 | map_word d, t; |
397 | 404 | ||
@@ -401,6 +408,32 @@ static int chip_ready(struct map_info *map, unsigned long addr) | |||
401 | return map_word_equal(map, d, t); | 408 | return map_word_equal(map, d, t); |
402 | } | 409 | } |
403 | 410 | ||
411 | /* | ||
412 | * Return true if the chip is ready and has the correct value. | ||
413 | * | ||
414 | * Ready is one of: read mode, query mode, erase-suspend-read mode (in any | ||
415 | * non-suspended sector) and it is indicated by no bits toggling. | ||
416 | * | ||
417 | * Error are indicated by toggling bits or bits held with the wrong value, | ||
418 | * or with bits toggling. | ||
419 | * | ||
420 | * Note that anything more complicated than checking if no bits are toggling | ||
421 | * (including checking DQ5 for an error status) is tricky to get working | ||
422 | * correctly and is therefore not done (particulary with interleaved chips | ||
423 | * as each chip must be checked independantly of the others). | ||
424 | * | ||
425 | */ | ||
426 | static int __xipram chip_good(struct map_info *map, unsigned long addr, map_word expected) | ||
427 | { | ||
428 | map_word oldd, curd; | ||
429 | |||
430 | oldd = map_read(map, addr); | ||
431 | curd = map_read(map, addr); | ||
432 | |||
433 | return map_word_equal(map, oldd, curd) && | ||
434 | map_word_equal(map, curd, expected); | ||
435 | } | ||
436 | |||
404 | static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode) | 437 | static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode) |
405 | { | 438 | { |
406 | DECLARE_WAITQUEUE(wait, current); | 439 | DECLARE_WAITQUEUE(wait, current); |
@@ -420,12 +453,12 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr | |||
420 | 453 | ||
421 | if (time_after(jiffies, timeo)) { | 454 | if (time_after(jiffies, timeo)) { |
422 | printk(KERN_ERR "Waiting for chip to be ready timed out.\n"); | 455 | printk(KERN_ERR "Waiting for chip to be ready timed out.\n"); |
423 | cfi_spin_unlock(chip->mutex); | 456 | spin_unlock(chip->mutex); |
424 | return -EIO; | 457 | return -EIO; |
425 | } | 458 | } |
426 | cfi_spin_unlock(chip->mutex); | 459 | spin_unlock(chip->mutex); |
427 | cfi_udelay(1); | 460 | cfi_udelay(1); |
428 | cfi_spin_lock(chip->mutex); | 461 | spin_lock(chip->mutex); |
429 | /* Someone else might have been playing with it. */ | 462 | /* Someone else might have been playing with it. */ |
430 | goto retry; | 463 | goto retry; |
431 | } | 464 | } |
@@ -473,15 +506,23 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr | |||
473 | return -EIO; | 506 | return -EIO; |
474 | } | 507 | } |
475 | 508 | ||
476 | cfi_spin_unlock(chip->mutex); | 509 | spin_unlock(chip->mutex); |
477 | cfi_udelay(1); | 510 | cfi_udelay(1); |
478 | cfi_spin_lock(chip->mutex); | 511 | spin_lock(chip->mutex); |
479 | /* Nobody will touch it while it's in state FL_ERASE_SUSPENDING. | 512 | /* Nobody will touch it while it's in state FL_ERASE_SUSPENDING. |
480 | So we can just loop here. */ | 513 | So we can just loop here. */ |
481 | } | 514 | } |
482 | chip->state = FL_READY; | 515 | chip->state = FL_READY; |
483 | return 0; | 516 | return 0; |
484 | 517 | ||
518 | case FL_XIP_WHILE_ERASING: | ||
519 | if (mode != FL_READY && mode != FL_POINT && | ||
520 | (!cfip || !(cfip->EraseSuspend&2))) | ||
521 | goto sleep; | ||
522 | chip->oldstate = chip->state; | ||
523 | chip->state = FL_READY; | ||
524 | return 0; | ||
525 | |||
485 | case FL_POINT: | 526 | case FL_POINT: |
486 | /* Only if there's no operation suspended... */ | 527 | /* Only if there's no operation suspended... */ |
487 | if (mode == FL_READY && chip->oldstate == FL_READY) | 528 | if (mode == FL_READY && chip->oldstate == FL_READY) |
@@ -491,10 +532,10 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr | |||
491 | sleep: | 532 | sleep: |
492 | set_current_state(TASK_UNINTERRUPTIBLE); | 533 | set_current_state(TASK_UNINTERRUPTIBLE); |
493 | add_wait_queue(&chip->wq, &wait); | 534 | add_wait_queue(&chip->wq, &wait); |
494 | cfi_spin_unlock(chip->mutex); | 535 | spin_unlock(chip->mutex); |
495 | schedule(); | 536 | schedule(); |
496 | remove_wait_queue(&chip->wq, &wait); | 537 | remove_wait_queue(&chip->wq, &wait); |
497 | cfi_spin_lock(chip->mutex); | 538 | spin_lock(chip->mutex); |
498 | goto resettime; | 539 | goto resettime; |
499 | } | 540 | } |
500 | } | 541 | } |
@@ -512,6 +553,11 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad | |||
512 | chip->state = FL_ERASING; | 553 | chip->state = FL_ERASING; |
513 | break; | 554 | break; |
514 | 555 | ||
556 | case FL_XIP_WHILE_ERASING: | ||
557 | chip->state = chip->oldstate; | ||
558 | chip->oldstate = FL_READY; | ||
559 | break; | ||
560 | |||
515 | case FL_READY: | 561 | case FL_READY: |
516 | case FL_STATUS: | 562 | case FL_STATUS: |
517 | /* We should really make set_vpp() count, rather than doing this */ | 563 | /* We should really make set_vpp() count, rather than doing this */ |
@@ -523,6 +569,198 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad | |||
523 | wake_up(&chip->wq); | 569 | wake_up(&chip->wq); |
524 | } | 570 | } |
525 | 571 | ||
572 | #ifdef CONFIG_MTD_XIP | ||
573 | |||
574 | /* | ||
575 | * No interrupt what so ever can be serviced while the flash isn't in array | ||
576 | * mode. This is ensured by the xip_disable() and xip_enable() functions | ||
577 | * enclosing any code path where the flash is known not to be in array mode. | ||
578 | * And within a XIP disabled code path, only functions marked with __xipram | ||
579 | * may be called and nothing else (it's a good thing to inspect generated | ||
580 | * assembly to make sure inline functions were actually inlined and that gcc | ||
581 | * didn't emit calls to its own support functions). Also configuring MTD CFI | ||
582 | * support to a single buswidth and a single interleave is also recommended. | ||
583 | */ | ||
584 | |||
585 | static void xip_disable(struct map_info *map, struct flchip *chip, | ||
586 | unsigned long adr) | ||
587 | { | ||
588 | /* TODO: chips with no XIP use should ignore and return */ | ||
589 | (void) map_read(map, adr); /* ensure mmu mapping is up to date */ | ||
590 | local_irq_disable(); | ||
591 | } | ||
592 | |||
593 | static void __xipram xip_enable(struct map_info *map, struct flchip *chip, | ||
594 | unsigned long adr) | ||
595 | { | ||
596 | struct cfi_private *cfi = map->fldrv_priv; | ||
597 | |||
598 | if (chip->state != FL_POINT && chip->state != FL_READY) { | ||
599 | map_write(map, CMD(0xf0), adr); | ||
600 | chip->state = FL_READY; | ||
601 | } | ||
602 | (void) map_read(map, adr); | ||
603 | xip_iprefetch(); | ||
604 | local_irq_enable(); | ||
605 | } | ||
606 | |||
607 | /* | ||
608 | * When a delay is required for the flash operation to complete, the | ||
609 | * xip_udelay() function is polling for both the given timeout and pending | ||
610 | * (but still masked) hardware interrupts. Whenever there is an interrupt | ||
611 | * pending then the flash erase operation is suspended, array mode restored | ||
612 | * and interrupts unmasked. Task scheduling might also happen at that | ||
613 | * point. The CPU eventually returns from the interrupt or the call to | ||
614 | * schedule() and the suspended flash operation is resumed for the remaining | ||
615 | * of the delay period. | ||
616 | * | ||
617 | * Warning: this function _will_ fool interrupt latency tracing tools. | ||
618 | */ | ||
619 | |||
620 | static void __xipram xip_udelay(struct map_info *map, struct flchip *chip, | ||
621 | unsigned long adr, int usec) | ||
622 | { | ||
623 | struct cfi_private *cfi = map->fldrv_priv; | ||
624 | struct cfi_pri_amdstd *extp = cfi->cmdset_priv; | ||
625 | map_word status, OK = CMD(0x80); | ||
626 | unsigned long suspended, start = xip_currtime(); | ||
627 | flstate_t oldstate; | ||
628 | |||
629 | do { | ||
630 | cpu_relax(); | ||
631 | if (xip_irqpending() && extp && | ||
632 | ((chip->state == FL_ERASING && (extp->EraseSuspend & 2))) && | ||
633 | (cfi_interleave_is_1(cfi) || chip->oldstate == FL_READY)) { | ||
634 | /* | ||
635 | * Let's suspend the erase operation when supported. | ||
636 | * Note that we currently don't try to suspend | ||
637 | * interleaved chips if there is already another | ||
638 | * operation suspended (imagine what happens | ||
639 | * when one chip was already done with the current | ||
640 | * operation while another chip suspended it, then | ||
641 | * we resume the whole thing at once). Yes, it | ||
642 | * can happen! | ||
643 | */ | ||
644 | map_write(map, CMD(0xb0), adr); | ||
645 | usec -= xip_elapsed_since(start); | ||
646 | suspended = xip_currtime(); | ||
647 | do { | ||
648 | if (xip_elapsed_since(suspended) > 100000) { | ||
649 | /* | ||
650 | * The chip doesn't want to suspend | ||
651 | * after waiting for 100 msecs. | ||
652 | * This is a critical error but there | ||
653 | * is not much we can do here. | ||
654 | */ | ||
655 | return; | ||
656 | } | ||
657 | status = map_read(map, adr); | ||
658 | } while (!map_word_andequal(map, status, OK, OK)); | ||
659 | |||
660 | /* Suspend succeeded */ | ||
661 | oldstate = chip->state; | ||
662 | if (!map_word_bitsset(map, status, CMD(0x40))) | ||
663 | break; | ||
664 | chip->state = FL_XIP_WHILE_ERASING; | ||
665 | chip->erase_suspended = 1; | ||
666 | map_write(map, CMD(0xf0), adr); | ||
667 | (void) map_read(map, adr); | ||
668 | asm volatile (".rep 8; nop; .endr"); | ||
669 | local_irq_enable(); | ||
670 | spin_unlock(chip->mutex); | ||
671 | asm volatile (".rep 8; nop; .endr"); | ||
672 | cond_resched(); | ||
673 | |||
674 | /* | ||
675 | * We're back. However someone else might have | ||
676 | * decided to go write to the chip if we are in | ||
677 | * a suspended erase state. If so let's wait | ||
678 | * until it's done. | ||
679 | */ | ||
680 | spin_lock(chip->mutex); | ||
681 | while (chip->state != FL_XIP_WHILE_ERASING) { | ||
682 | DECLARE_WAITQUEUE(wait, current); | ||
683 | set_current_state(TASK_UNINTERRUPTIBLE); | ||
684 | add_wait_queue(&chip->wq, &wait); | ||
685 | spin_unlock(chip->mutex); | ||
686 | schedule(); | ||
687 | remove_wait_queue(&chip->wq, &wait); | ||
688 | spin_lock(chip->mutex); | ||
689 | } | ||
690 | /* Disallow XIP again */ | ||
691 | local_irq_disable(); | ||
692 | |||
693 | /* Resume the write or erase operation */ | ||
694 | map_write(map, CMD(0x30), adr); | ||
695 | chip->state = oldstate; | ||
696 | start = xip_currtime(); | ||
697 | } else if (usec >= 1000000/HZ) { | ||
698 | /* | ||
699 | * Try to save on CPU power when waiting delay | ||
700 | * is at least a system timer tick period. | ||
701 | * No need to be extremely accurate here. | ||
702 | */ | ||
703 | xip_cpu_idle(); | ||
704 | } | ||
705 | status = map_read(map, adr); | ||
706 | } while (!map_word_andequal(map, status, OK, OK) | ||
707 | && xip_elapsed_since(start) < usec); | ||
708 | } | ||
709 | |||
710 | #define UDELAY(map, chip, adr, usec) xip_udelay(map, chip, adr, usec) | ||
711 | |||
712 | /* | ||
713 | * The INVALIDATE_CACHED_RANGE() macro is normally used in parallel while | ||
714 | * the flash is actively programming or erasing since we have to poll for | ||
715 | * the operation to complete anyway. We can't do that in a generic way with | ||
716 | * a XIP setup so do it before the actual flash operation in this case | ||
717 | * and stub it out from INVALIDATE_CACHE_UDELAY. | ||
718 | */ | ||
719 | #define XIP_INVAL_CACHED_RANGE(map, from, size) \ | ||
720 | INVALIDATE_CACHED_RANGE(map, from, size) | ||
721 | |||
722 | #define INVALIDATE_CACHE_UDELAY(map, chip, adr, len, usec) \ | ||
723 | UDELAY(map, chip, adr, usec) | ||
724 | |||
725 | /* | ||
726 | * Extra notes: | ||
727 | * | ||
728 | * Activating this XIP support changes the way the code works a bit. For | ||
729 | * example the code to suspend the current process when concurrent access | ||
730 | * happens is never executed because xip_udelay() will always return with the | ||
731 | * same chip state as it was entered with. This is why there is no care for | ||
732 | * the presence of add_wait_queue() or schedule() calls from within a couple | ||
733 | * xip_disable()'d areas of code, like in do_erase_oneblock for example. | ||
734 | * The queueing and scheduling are always happening within xip_udelay(). | ||
735 | * | ||
736 | * Similarly, get_chip() and put_chip() just happen to always be executed | ||
737 | * with chip->state set to FL_READY (or FL_XIP_WHILE_*) where flash state | ||
738 | * is in array mode, therefore never executing many cases therein and not | ||
739 | * causing any problem with XIP. | ||
740 | */ | ||
741 | |||
742 | #else | ||
743 | |||
744 | #define xip_disable(map, chip, adr) | ||
745 | #define xip_enable(map, chip, adr) | ||
746 | #define XIP_INVAL_CACHED_RANGE(x...) | ||
747 | |||
748 | #define UDELAY(map, chip, adr, usec) \ | ||
749 | do { \ | ||
750 | spin_unlock(chip->mutex); \ | ||
751 | cfi_udelay(usec); \ | ||
752 | spin_lock(chip->mutex); \ | ||
753 | } while (0) | ||
754 | |||
755 | #define INVALIDATE_CACHE_UDELAY(map, chip, adr, len, usec) \ | ||
756 | do { \ | ||
757 | spin_unlock(chip->mutex); \ | ||
758 | INVALIDATE_CACHED_RANGE(map, adr, len); \ | ||
759 | cfi_udelay(usec); \ | ||
760 | spin_lock(chip->mutex); \ | ||
761 | } while (0) | ||
762 | |||
763 | #endif | ||
526 | 764 | ||
527 | static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf) | 765 | static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf) |
528 | { | 766 | { |
@@ -535,10 +773,10 @@ static inline int do_read_onechip(struct map_info *map, struct flchip *chip, lof | |||
535 | /* Ensure cmd read/writes are aligned. */ | 773 | /* Ensure cmd read/writes are aligned. */ |
536 | cmd_addr = adr & ~(map_bankwidth(map)-1); | 774 | cmd_addr = adr & ~(map_bankwidth(map)-1); |
537 | 775 | ||
538 | cfi_spin_lock(chip->mutex); | 776 | spin_lock(chip->mutex); |
539 | ret = get_chip(map, chip, cmd_addr, FL_READY); | 777 | ret = get_chip(map, chip, cmd_addr, FL_READY); |
540 | if (ret) { | 778 | if (ret) { |
541 | cfi_spin_unlock(chip->mutex); | 779 | spin_unlock(chip->mutex); |
542 | return ret; | 780 | return ret; |
543 | } | 781 | } |
544 | 782 | ||
@@ -551,7 +789,7 @@ static inline int do_read_onechip(struct map_info *map, struct flchip *chip, lof | |||
551 | 789 | ||
552 | put_chip(map, chip, cmd_addr); | 790 | put_chip(map, chip, cmd_addr); |
553 | 791 | ||
554 | cfi_spin_unlock(chip->mutex); | 792 | spin_unlock(chip->mutex); |
555 | return 0; | 793 | return 0; |
556 | } | 794 | } |
557 | 795 | ||
@@ -605,7 +843,7 @@ static inline int do_read_secsi_onechip(struct map_info *map, struct flchip *chi | |||
605 | struct cfi_private *cfi = map->fldrv_priv; | 843 | struct cfi_private *cfi = map->fldrv_priv; |
606 | 844 | ||
607 | retry: | 845 | retry: |
608 | cfi_spin_lock(chip->mutex); | 846 | spin_lock(chip->mutex); |
609 | 847 | ||
610 | if (chip->state != FL_READY){ | 848 | if (chip->state != FL_READY){ |
611 | #if 0 | 849 | #if 0 |
@@ -614,7 +852,7 @@ static inline int do_read_secsi_onechip(struct map_info *map, struct flchip *chi | |||
614 | set_current_state(TASK_UNINTERRUPTIBLE); | 852 | set_current_state(TASK_UNINTERRUPTIBLE); |
615 | add_wait_queue(&chip->wq, &wait); | 853 | add_wait_queue(&chip->wq, &wait); |
616 | 854 | ||
617 | cfi_spin_unlock(chip->mutex); | 855 | spin_unlock(chip->mutex); |
618 | 856 | ||
619 | schedule(); | 857 | schedule(); |
620 | remove_wait_queue(&chip->wq, &wait); | 858 | remove_wait_queue(&chip->wq, &wait); |
@@ -643,7 +881,7 @@ static inline int do_read_secsi_onechip(struct map_info *map, struct flchip *chi | |||
643 | cfi_send_gen_cmd(0x00, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); | 881 | cfi_send_gen_cmd(0x00, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); |
644 | 882 | ||
645 | wake_up(&chip->wq); | 883 | wake_up(&chip->wq); |
646 | cfi_spin_unlock(chip->mutex); | 884 | spin_unlock(chip->mutex); |
647 | 885 | ||
648 | return 0; | 886 | return 0; |
649 | } | 887 | } |
@@ -692,7 +930,7 @@ static int cfi_amdstd_secsi_read (struct mtd_info *mtd, loff_t from, size_t len, | |||
692 | } | 930 | } |
693 | 931 | ||
694 | 932 | ||
695 | static int do_write_oneword(struct map_info *map, struct flchip *chip, unsigned long adr, map_word datum) | 933 | static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, unsigned long adr, map_word datum) |
696 | { | 934 | { |
697 | struct cfi_private *cfi = map->fldrv_priv; | 935 | struct cfi_private *cfi = map->fldrv_priv; |
698 | unsigned long timeo = jiffies + HZ; | 936 | unsigned long timeo = jiffies + HZ; |
@@ -712,10 +950,10 @@ static int do_write_oneword(struct map_info *map, struct flchip *chip, unsigned | |||
712 | 950 | ||
713 | adr += chip->start; | 951 | adr += chip->start; |
714 | 952 | ||
715 | cfi_spin_lock(chip->mutex); | 953 | spin_lock(chip->mutex); |
716 | ret = get_chip(map, chip, adr, FL_WRITING); | 954 | ret = get_chip(map, chip, adr, FL_WRITING); |
717 | if (ret) { | 955 | if (ret) { |
718 | cfi_spin_unlock(chip->mutex); | 956 | spin_unlock(chip->mutex); |
719 | return ret; | 957 | return ret; |
720 | } | 958 | } |
721 | 959 | ||
@@ -735,7 +973,9 @@ static int do_write_oneword(struct map_info *map, struct flchip *chip, unsigned | |||
735 | goto op_done; | 973 | goto op_done; |
736 | } | 974 | } |
737 | 975 | ||
976 | XIP_INVAL_CACHED_RANGE(map, adr, map_bankwidth(map)); | ||
738 | ENABLE_VPP(map); | 977 | ENABLE_VPP(map); |
978 | xip_disable(map, chip, adr); | ||
739 | retry: | 979 | retry: |
740 | cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); | 980 | cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); |
741 | cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); | 981 | cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); |
@@ -743,9 +983,9 @@ static int do_write_oneword(struct map_info *map, struct flchip *chip, unsigned | |||
743 | map_write(map, datum, adr); | 983 | map_write(map, datum, adr); |
744 | chip->state = FL_WRITING; | 984 | chip->state = FL_WRITING; |
745 | 985 | ||
746 | cfi_spin_unlock(chip->mutex); | 986 | INVALIDATE_CACHE_UDELAY(map, chip, |
747 | cfi_udelay(chip->word_write_time); | 987 | adr, map_bankwidth(map), |
748 | cfi_spin_lock(chip->mutex); | 988 | chip->word_write_time); |
749 | 989 | ||
750 | /* See comment above for timeout value. */ | 990 | /* See comment above for timeout value. */ |
751 | timeo = jiffies + uWriteTimeout; | 991 | timeo = jiffies + uWriteTimeout; |
@@ -756,39 +996,43 @@ static int do_write_oneword(struct map_info *map, struct flchip *chip, unsigned | |||
756 | 996 | ||
757 | set_current_state(TASK_UNINTERRUPTIBLE); | 997 | set_current_state(TASK_UNINTERRUPTIBLE); |
758 | add_wait_queue(&chip->wq, &wait); | 998 | add_wait_queue(&chip->wq, &wait); |
759 | cfi_spin_unlock(chip->mutex); | 999 | spin_unlock(chip->mutex); |
760 | schedule(); | 1000 | schedule(); |
761 | remove_wait_queue(&chip->wq, &wait); | 1001 | remove_wait_queue(&chip->wq, &wait); |
762 | timeo = jiffies + (HZ / 2); /* FIXME */ | 1002 | timeo = jiffies + (HZ / 2); /* FIXME */ |
763 | cfi_spin_lock(chip->mutex); | 1003 | spin_lock(chip->mutex); |
764 | continue; | 1004 | continue; |
765 | } | 1005 | } |
766 | 1006 | ||
767 | if (chip_ready(map, adr)) | 1007 | if (chip_ready(map, adr)) |
768 | goto op_done; | 1008 | break; |
769 | 1009 | ||
770 | if (time_after(jiffies, timeo)) | 1010 | if (time_after(jiffies, timeo)) { |
1011 | xip_enable(map, chip, adr); | ||
1012 | printk(KERN_WARNING "MTD %s(): software timeout\n", __func__); | ||
1013 | xip_disable(map, chip, adr); | ||
771 | break; | 1014 | break; |
1015 | } | ||
772 | 1016 | ||
773 | /* Latency issues. Drop the lock, wait a while and retry */ | 1017 | /* Latency issues. Drop the lock, wait a while and retry */ |
774 | cfi_spin_unlock(chip->mutex); | 1018 | UDELAY(map, chip, adr, 1); |
775 | cfi_udelay(1); | ||
776 | cfi_spin_lock(chip->mutex); | ||
777 | } | 1019 | } |
1020 | /* Did we succeed? */ | ||
1021 | if (!chip_good(map, adr, datum)) { | ||
1022 | /* reset on all failures. */ | ||
1023 | map_write( map, CMD(0xF0), chip->start ); | ||
1024 | /* FIXME - should have reset delay before continuing */ | ||
778 | 1025 | ||
779 | printk(KERN_WARNING "MTD %s(): software timeout\n", __func__); | 1026 | if (++retry_cnt <= MAX_WORD_RETRIES) |
780 | 1027 | goto retry; | |
781 | /* reset on all failures. */ | ||
782 | map_write( map, CMD(0xF0), chip->start ); | ||
783 | /* FIXME - should have reset delay before continuing */ | ||
784 | if (++retry_cnt <= MAX_WORD_RETRIES) | ||
785 | goto retry; | ||
786 | 1028 | ||
787 | ret = -EIO; | 1029 | ret = -EIO; |
1030 | } | ||
1031 | xip_enable(map, chip, adr); | ||
788 | op_done: | 1032 | op_done: |
789 | chip->state = FL_READY; | 1033 | chip->state = FL_READY; |
790 | put_chip(map, chip, adr); | 1034 | put_chip(map, chip, adr); |
791 | cfi_spin_unlock(chip->mutex); | 1035 | spin_unlock(chip->mutex); |
792 | 1036 | ||
793 | return ret; | 1037 | return ret; |
794 | } | 1038 | } |
@@ -820,7 +1064,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len, | |||
820 | map_word tmp_buf; | 1064 | map_word tmp_buf; |
821 | 1065 | ||
822 | retry: | 1066 | retry: |
823 | cfi_spin_lock(cfi->chips[chipnum].mutex); | 1067 | spin_lock(cfi->chips[chipnum].mutex); |
824 | 1068 | ||
825 | if (cfi->chips[chipnum].state != FL_READY) { | 1069 | if (cfi->chips[chipnum].state != FL_READY) { |
826 | #if 0 | 1070 | #if 0 |
@@ -829,7 +1073,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len, | |||
829 | set_current_state(TASK_UNINTERRUPTIBLE); | 1073 | set_current_state(TASK_UNINTERRUPTIBLE); |
830 | add_wait_queue(&cfi->chips[chipnum].wq, &wait); | 1074 | add_wait_queue(&cfi->chips[chipnum].wq, &wait); |
831 | 1075 | ||
832 | cfi_spin_unlock(cfi->chips[chipnum].mutex); | 1076 | spin_unlock(cfi->chips[chipnum].mutex); |
833 | 1077 | ||
834 | schedule(); | 1078 | schedule(); |
835 | remove_wait_queue(&cfi->chips[chipnum].wq, &wait); | 1079 | remove_wait_queue(&cfi->chips[chipnum].wq, &wait); |
@@ -843,7 +1087,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len, | |||
843 | /* Load 'tmp_buf' with old contents of flash */ | 1087 | /* Load 'tmp_buf' with old contents of flash */ |
844 | tmp_buf = map_read(map, bus_ofs+chipstart); | 1088 | tmp_buf = map_read(map, bus_ofs+chipstart); |
845 | 1089 | ||
846 | cfi_spin_unlock(cfi->chips[chipnum].mutex); | 1090 | spin_unlock(cfi->chips[chipnum].mutex); |
847 | 1091 | ||
848 | /* Number of bytes to copy from buffer */ | 1092 | /* Number of bytes to copy from buffer */ |
849 | n = min_t(int, len, map_bankwidth(map)-i); | 1093 | n = min_t(int, len, map_bankwidth(map)-i); |
@@ -898,7 +1142,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len, | |||
898 | map_word tmp_buf; | 1142 | map_word tmp_buf; |
899 | 1143 | ||
900 | retry1: | 1144 | retry1: |
901 | cfi_spin_lock(cfi->chips[chipnum].mutex); | 1145 | spin_lock(cfi->chips[chipnum].mutex); |
902 | 1146 | ||
903 | if (cfi->chips[chipnum].state != FL_READY) { | 1147 | if (cfi->chips[chipnum].state != FL_READY) { |
904 | #if 0 | 1148 | #if 0 |
@@ -907,7 +1151,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len, | |||
907 | set_current_state(TASK_UNINTERRUPTIBLE); | 1151 | set_current_state(TASK_UNINTERRUPTIBLE); |
908 | add_wait_queue(&cfi->chips[chipnum].wq, &wait); | 1152 | add_wait_queue(&cfi->chips[chipnum].wq, &wait); |
909 | 1153 | ||
910 | cfi_spin_unlock(cfi->chips[chipnum].mutex); | 1154 | spin_unlock(cfi->chips[chipnum].mutex); |
911 | 1155 | ||
912 | schedule(); | 1156 | schedule(); |
913 | remove_wait_queue(&cfi->chips[chipnum].wq, &wait); | 1157 | remove_wait_queue(&cfi->chips[chipnum].wq, &wait); |
@@ -920,7 +1164,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len, | |||
920 | 1164 | ||
921 | tmp_buf = map_read(map, ofs + chipstart); | 1165 | tmp_buf = map_read(map, ofs + chipstart); |
922 | 1166 | ||
923 | cfi_spin_unlock(cfi->chips[chipnum].mutex); | 1167 | spin_unlock(cfi->chips[chipnum].mutex); |
924 | 1168 | ||
925 | tmp_buf = map_word_load_partial(map, tmp_buf, buf, 0, len); | 1169 | tmp_buf = map_word_load_partial(map, tmp_buf, buf, 0, len); |
926 | 1170 | ||
@@ -939,8 +1183,9 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len, | |||
939 | /* | 1183 | /* |
940 | * FIXME: interleaved mode not tested, and probably not supported! | 1184 | * FIXME: interleaved mode not tested, and probably not supported! |
941 | */ | 1185 | */ |
942 | static inline int do_write_buffer(struct map_info *map, struct flchip *chip, | 1186 | static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, |
943 | unsigned long adr, const u_char *buf, int len) | 1187 | unsigned long adr, const u_char *buf, |
1188 | int len) | ||
944 | { | 1189 | { |
945 | struct cfi_private *cfi = map->fldrv_priv; | 1190 | struct cfi_private *cfi = map->fldrv_priv; |
946 | unsigned long timeo = jiffies + HZ; | 1191 | unsigned long timeo = jiffies + HZ; |
@@ -954,10 +1199,10 @@ static inline int do_write_buffer(struct map_info *map, struct flchip *chip, | |||
954 | adr += chip->start; | 1199 | adr += chip->start; |
955 | cmd_adr = adr; | 1200 | cmd_adr = adr; |
956 | 1201 | ||
957 | cfi_spin_lock(chip->mutex); | 1202 | spin_lock(chip->mutex); |
958 | ret = get_chip(map, chip, adr, FL_WRITING); | 1203 | ret = get_chip(map, chip, adr, FL_WRITING); |
959 | if (ret) { | 1204 | if (ret) { |
960 | cfi_spin_unlock(chip->mutex); | 1205 | spin_unlock(chip->mutex); |
961 | return ret; | 1206 | return ret; |
962 | } | 1207 | } |
963 | 1208 | ||
@@ -966,7 +1211,10 @@ static inline int do_write_buffer(struct map_info *map, struct flchip *chip, | |||
966 | DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n", | 1211 | DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n", |
967 | __func__, adr, datum.x[0] ); | 1212 | __func__, adr, datum.x[0] ); |
968 | 1213 | ||
1214 | XIP_INVAL_CACHED_RANGE(map, adr, len); | ||
969 | ENABLE_VPP(map); | 1215 | ENABLE_VPP(map); |
1216 | xip_disable(map, chip, cmd_adr); | ||
1217 | |||
970 | cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); | 1218 | cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); |
971 | cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); | 1219 | cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); |
972 | //cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); | 1220 | //cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); |
@@ -996,9 +1244,9 @@ static inline int do_write_buffer(struct map_info *map, struct flchip *chip, | |||
996 | map_write(map, CMD(0x29), cmd_adr); | 1244 | map_write(map, CMD(0x29), cmd_adr); |
997 | chip->state = FL_WRITING; | 1245 | chip->state = FL_WRITING; |
998 | 1246 | ||
999 | cfi_spin_unlock(chip->mutex); | 1247 | INVALIDATE_CACHE_UDELAY(map, chip, |
1000 | cfi_udelay(chip->buffer_write_time); | 1248 | adr, map_bankwidth(map), |
1001 | cfi_spin_lock(chip->mutex); | 1249 | chip->word_write_time); |
1002 | 1250 | ||
1003 | timeo = jiffies + uWriteTimeout; | 1251 | timeo = jiffies + uWriteTimeout; |
1004 | 1252 | ||
@@ -1009,38 +1257,39 @@ static inline int do_write_buffer(struct map_info *map, struct flchip *chip, | |||
1009 | 1257 | ||
1010 | set_current_state(TASK_UNINTERRUPTIBLE); | 1258 | set_current_state(TASK_UNINTERRUPTIBLE); |
1011 | add_wait_queue(&chip->wq, &wait); | 1259 | add_wait_queue(&chip->wq, &wait); |
1012 | cfi_spin_unlock(chip->mutex); | 1260 | spin_unlock(chip->mutex); |
1013 | schedule(); | 1261 | schedule(); |
1014 | remove_wait_queue(&chip->wq, &wait); | 1262 | remove_wait_queue(&chip->wq, &wait); |
1015 | timeo = jiffies + (HZ / 2); /* FIXME */ | 1263 | timeo = jiffies + (HZ / 2); /* FIXME */ |
1016 | cfi_spin_lock(chip->mutex); | 1264 | spin_lock(chip->mutex); |
1017 | continue; | 1265 | continue; |
1018 | } | 1266 | } |
1019 | 1267 | ||
1020 | if (chip_ready(map, adr)) | 1268 | if (chip_ready(map, adr)) { |
1269 | xip_enable(map, chip, adr); | ||
1021 | goto op_done; | 1270 | goto op_done; |
1271 | } | ||
1022 | 1272 | ||
1023 | if( time_after(jiffies, timeo)) | 1273 | if( time_after(jiffies, timeo)) |
1024 | break; | 1274 | break; |
1025 | 1275 | ||
1026 | /* Latency issues. Drop the lock, wait a while and retry */ | 1276 | /* Latency issues. Drop the lock, wait a while and retry */ |
1027 | cfi_spin_unlock(chip->mutex); | 1277 | UDELAY(map, chip, adr, 1); |
1028 | cfi_udelay(1); | ||
1029 | cfi_spin_lock(chip->mutex); | ||
1030 | } | 1278 | } |
1031 | 1279 | ||
1032 | printk(KERN_WARNING "MTD %s(): software timeout\n", | ||
1033 | __func__ ); | ||
1034 | |||
1035 | /* reset on all failures. */ | 1280 | /* reset on all failures. */ |
1036 | map_write( map, CMD(0xF0), chip->start ); | 1281 | map_write( map, CMD(0xF0), chip->start ); |
1282 | xip_enable(map, chip, adr); | ||
1037 | /* FIXME - should have reset delay before continuing */ | 1283 | /* FIXME - should have reset delay before continuing */ |
1038 | 1284 | ||
1285 | printk(KERN_WARNING "MTD %s(): software timeout\n", | ||
1286 | __func__ ); | ||
1287 | |||
1039 | ret = -EIO; | 1288 | ret = -EIO; |
1040 | op_done: | 1289 | op_done: |
1041 | chip->state = FL_READY; | 1290 | chip->state = FL_READY; |
1042 | put_chip(map, chip, adr); | 1291 | put_chip(map, chip, adr); |
1043 | cfi_spin_unlock(chip->mutex); | 1292 | spin_unlock(chip->mutex); |
1044 | 1293 | ||
1045 | return ret; | 1294 | return ret; |
1046 | } | 1295 | } |
@@ -1130,7 +1379,7 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, | |||
1130 | * Handle devices with one erase region, that only implement | 1379 | * Handle devices with one erase region, that only implement |
1131 | * the chip erase command. | 1380 | * the chip erase command. |
1132 | */ | 1381 | */ |
1133 | static inline int do_erase_chip(struct map_info *map, struct flchip *chip) | 1382 | static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) |
1134 | { | 1383 | { |
1135 | struct cfi_private *cfi = map->fldrv_priv; | 1384 | struct cfi_private *cfi = map->fldrv_priv; |
1136 | unsigned long timeo = jiffies + HZ; | 1385 | unsigned long timeo = jiffies + HZ; |
@@ -1140,17 +1389,20 @@ static inline int do_erase_chip(struct map_info *map, struct flchip *chip) | |||
1140 | 1389 | ||
1141 | adr = cfi->addr_unlock1; | 1390 | adr = cfi->addr_unlock1; |
1142 | 1391 | ||
1143 | cfi_spin_lock(chip->mutex); | 1392 | spin_lock(chip->mutex); |
1144 | ret = get_chip(map, chip, adr, FL_WRITING); | 1393 | ret = get_chip(map, chip, adr, FL_WRITING); |
1145 | if (ret) { | 1394 | if (ret) { |
1146 | cfi_spin_unlock(chip->mutex); | 1395 | spin_unlock(chip->mutex); |
1147 | return ret; | 1396 | return ret; |
1148 | } | 1397 | } |
1149 | 1398 | ||
1150 | DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n", | 1399 | DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n", |
1151 | __func__, chip->start ); | 1400 | __func__, chip->start ); |
1152 | 1401 | ||
1402 | XIP_INVAL_CACHED_RANGE(map, adr, map->size); | ||
1153 | ENABLE_VPP(map); | 1403 | ENABLE_VPP(map); |
1404 | xip_disable(map, chip, adr); | ||
1405 | |||
1154 | cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); | 1406 | cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); |
1155 | cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); | 1407 | cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); |
1156 | cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); | 1408 | cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); |
@@ -1162,9 +1414,9 @@ static inline int do_erase_chip(struct map_info *map, struct flchip *chip) | |||
1162 | chip->erase_suspended = 0; | 1414 | chip->erase_suspended = 0; |
1163 | chip->in_progress_block_addr = adr; | 1415 | chip->in_progress_block_addr = adr; |
1164 | 1416 | ||
1165 | cfi_spin_unlock(chip->mutex); | 1417 | INVALIDATE_CACHE_UDELAY(map, chip, |
1166 | msleep(chip->erase_time/2); | 1418 | adr, map->size, |
1167 | cfi_spin_lock(chip->mutex); | 1419 | chip->erase_time*500); |
1168 | 1420 | ||
1169 | timeo = jiffies + (HZ*20); | 1421 | timeo = jiffies + (HZ*20); |
1170 | 1422 | ||
@@ -1173,10 +1425,10 @@ static inline int do_erase_chip(struct map_info *map, struct flchip *chip) | |||
1173 | /* Someone's suspended the erase. Sleep */ | 1425 | /* Someone's suspended the erase. Sleep */ |
1174 | set_current_state(TASK_UNINTERRUPTIBLE); | 1426 | set_current_state(TASK_UNINTERRUPTIBLE); |
1175 | add_wait_queue(&chip->wq, &wait); | 1427 | add_wait_queue(&chip->wq, &wait); |
1176 | cfi_spin_unlock(chip->mutex); | 1428 | spin_unlock(chip->mutex); |
1177 | schedule(); | 1429 | schedule(); |
1178 | remove_wait_queue(&chip->wq, &wait); | 1430 | remove_wait_queue(&chip->wq, &wait); |
1179 | cfi_spin_lock(chip->mutex); | 1431 | spin_lock(chip->mutex); |
1180 | continue; | 1432 | continue; |
1181 | } | 1433 | } |
1182 | if (chip->erase_suspended) { | 1434 | if (chip->erase_suspended) { |
@@ -1187,36 +1439,36 @@ static inline int do_erase_chip(struct map_info *map, struct flchip *chip) | |||
1187 | } | 1439 | } |
1188 | 1440 | ||
1189 | if (chip_ready(map, adr)) | 1441 | if (chip_ready(map, adr)) |
1190 | goto op_done; | 1442 | break; |
1191 | 1443 | ||
1192 | if (time_after(jiffies, timeo)) | 1444 | if (time_after(jiffies, timeo)) { |
1445 | printk(KERN_WARNING "MTD %s(): software timeout\n", | ||
1446 | __func__ ); | ||
1193 | break; | 1447 | break; |
1448 | } | ||
1194 | 1449 | ||
1195 | /* Latency issues. Drop the lock, wait a while and retry */ | 1450 | /* Latency issues. Drop the lock, wait a while and retry */ |
1196 | cfi_spin_unlock(chip->mutex); | 1451 | UDELAY(map, chip, adr, 1000000/HZ); |
1197 | set_current_state(TASK_UNINTERRUPTIBLE); | ||
1198 | schedule_timeout(1); | ||
1199 | cfi_spin_lock(chip->mutex); | ||
1200 | } | 1452 | } |
1453 | /* Did we succeed? */ | ||
1454 | if (!chip_good(map, adr, map_word_ff(map))) { | ||
1455 | /* reset on all failures. */ | ||
1456 | map_write( map, CMD(0xF0), chip->start ); | ||
1457 | /* FIXME - should have reset delay before continuing */ | ||
1201 | 1458 | ||
1202 | printk(KERN_WARNING "MTD %s(): software timeout\n", | 1459 | ret = -EIO; |
1203 | __func__ ); | 1460 | } |
1204 | |||
1205 | /* reset on all failures. */ | ||
1206 | map_write( map, CMD(0xF0), chip->start ); | ||
1207 | /* FIXME - should have reset delay before continuing */ | ||
1208 | 1461 | ||
1209 | ret = -EIO; | ||
1210 | op_done: | ||
1211 | chip->state = FL_READY; | 1462 | chip->state = FL_READY; |
1463 | xip_enable(map, chip, adr); | ||
1212 | put_chip(map, chip, adr); | 1464 | put_chip(map, chip, adr); |
1213 | cfi_spin_unlock(chip->mutex); | 1465 | spin_unlock(chip->mutex); |
1214 | 1466 | ||
1215 | return ret; | 1467 | return ret; |
1216 | } | 1468 | } |
1217 | 1469 | ||
1218 | 1470 | ||
1219 | static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr, int len, void *thunk) | 1471 | static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr, int len, void *thunk) |
1220 | { | 1472 | { |
1221 | struct cfi_private *cfi = map->fldrv_priv; | 1473 | struct cfi_private *cfi = map->fldrv_priv; |
1222 | unsigned long timeo = jiffies + HZ; | 1474 | unsigned long timeo = jiffies + HZ; |
@@ -1225,17 +1477,20 @@ static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, u | |||
1225 | 1477 | ||
1226 | adr += chip->start; | 1478 | adr += chip->start; |
1227 | 1479 | ||
1228 | cfi_spin_lock(chip->mutex); | 1480 | spin_lock(chip->mutex); |
1229 | ret = get_chip(map, chip, adr, FL_ERASING); | 1481 | ret = get_chip(map, chip, adr, FL_ERASING); |
1230 | if (ret) { | 1482 | if (ret) { |
1231 | cfi_spin_unlock(chip->mutex); | 1483 | spin_unlock(chip->mutex); |
1232 | return ret; | 1484 | return ret; |
1233 | } | 1485 | } |
1234 | 1486 | ||
1235 | DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n", | 1487 | DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n", |
1236 | __func__, adr ); | 1488 | __func__, adr ); |
1237 | 1489 | ||
1490 | XIP_INVAL_CACHED_RANGE(map, adr, len); | ||
1238 | ENABLE_VPP(map); | 1491 | ENABLE_VPP(map); |
1492 | xip_disable(map, chip, adr); | ||
1493 | |||
1239 | cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); | 1494 | cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); |
1240 | cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); | 1495 | cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); |
1241 | cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); | 1496 | cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); |
@@ -1246,10 +1501,10 @@ static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, u | |||
1246 | chip->state = FL_ERASING; | 1501 | chip->state = FL_ERASING; |
1247 | chip->erase_suspended = 0; | 1502 | chip->erase_suspended = 0; |
1248 | chip->in_progress_block_addr = adr; | 1503 | chip->in_progress_block_addr = adr; |
1249 | 1504 | ||
1250 | cfi_spin_unlock(chip->mutex); | 1505 | INVALIDATE_CACHE_UDELAY(map, chip, |
1251 | msleep(chip->erase_time/2); | 1506 | adr, len, |
1252 | cfi_spin_lock(chip->mutex); | 1507 | chip->erase_time*500); |
1253 | 1508 | ||
1254 | timeo = jiffies + (HZ*20); | 1509 | timeo = jiffies + (HZ*20); |
1255 | 1510 | ||
@@ -1258,10 +1513,10 @@ static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, u | |||
1258 | /* Someone's suspended the erase. Sleep */ | 1513 | /* Someone's suspended the erase. Sleep */ |
1259 | set_current_state(TASK_UNINTERRUPTIBLE); | 1514 | set_current_state(TASK_UNINTERRUPTIBLE); |
1260 | add_wait_queue(&chip->wq, &wait); | 1515 | add_wait_queue(&chip->wq, &wait); |
1261 | cfi_spin_unlock(chip->mutex); | 1516 | spin_unlock(chip->mutex); |
1262 | schedule(); | 1517 | schedule(); |
1263 | remove_wait_queue(&chip->wq, &wait); | 1518 | remove_wait_queue(&chip->wq, &wait); |
1264 | cfi_spin_lock(chip->mutex); | 1519 | spin_lock(chip->mutex); |
1265 | continue; | 1520 | continue; |
1266 | } | 1521 | } |
1267 | if (chip->erase_suspended) { | 1522 | if (chip->erase_suspended) { |
@@ -1271,31 +1526,33 @@ static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, u | |||
1271 | chip->erase_suspended = 0; | 1526 | chip->erase_suspended = 0; |
1272 | } | 1527 | } |
1273 | 1528 | ||
1274 | if (chip_ready(map, adr)) | 1529 | if (chip_ready(map, adr)) { |
1275 | goto op_done; | 1530 | xip_enable(map, chip, adr); |
1531 | break; | ||
1532 | } | ||
1276 | 1533 | ||
1277 | if (time_after(jiffies, timeo)) | 1534 | if (time_after(jiffies, timeo)) { |
1535 | xip_enable(map, chip, adr); | ||
1536 | printk(KERN_WARNING "MTD %s(): software timeout\n", | ||
1537 | __func__ ); | ||
1278 | break; | 1538 | break; |
1539 | } | ||
1279 | 1540 | ||
1280 | /* Latency issues. Drop the lock, wait a while and retry */ | 1541 | /* Latency issues. Drop the lock, wait a while and retry */ |
1281 | cfi_spin_unlock(chip->mutex); | 1542 | UDELAY(map, chip, adr, 1000000/HZ); |
1282 | set_current_state(TASK_UNINTERRUPTIBLE); | 1543 | } |
1283 | schedule_timeout(1); | 1544 | /* Did we succeed? */ |
1284 | cfi_spin_lock(chip->mutex); | 1545 | if (!chip_good(map, adr, map_word_ff(map))) { |
1546 | /* reset on all failures. */ | ||
1547 | map_write( map, CMD(0xF0), chip->start ); | ||
1548 | /* FIXME - should have reset delay before continuing */ | ||
1549 | |||
1550 | ret = -EIO; | ||
1285 | } | 1551 | } |
1286 | |||
1287 | printk(KERN_WARNING "MTD %s(): software timeout\n", | ||
1288 | __func__ ); | ||
1289 | |||
1290 | /* reset on all failures. */ | ||
1291 | map_write( map, CMD(0xF0), chip->start ); | ||
1292 | /* FIXME - should have reset delay before continuing */ | ||
1293 | 1552 | ||
1294 | ret = -EIO; | ||
1295 | op_done: | ||
1296 | chip->state = FL_READY; | 1553 | chip->state = FL_READY; |
1297 | put_chip(map, chip, adr); | 1554 | put_chip(map, chip, adr); |
1298 | cfi_spin_unlock(chip->mutex); | 1555 | spin_unlock(chip->mutex); |
1299 | return ret; | 1556 | return ret; |
1300 | } | 1557 | } |
1301 | 1558 | ||
@@ -1355,7 +1612,7 @@ static void cfi_amdstd_sync (struct mtd_info *mtd) | |||
1355 | chip = &cfi->chips[i]; | 1612 | chip = &cfi->chips[i]; |
1356 | 1613 | ||
1357 | retry: | 1614 | retry: |
1358 | cfi_spin_lock(chip->mutex); | 1615 | spin_lock(chip->mutex); |
1359 | 1616 | ||
1360 | switch(chip->state) { | 1617 | switch(chip->state) { |
1361 | case FL_READY: | 1618 | case FL_READY: |
@@ -1369,14 +1626,14 @@ static void cfi_amdstd_sync (struct mtd_info *mtd) | |||
1369 | * with the chip now anyway. | 1626 | * with the chip now anyway. |
1370 | */ | 1627 | */ |
1371 | case FL_SYNCING: | 1628 | case FL_SYNCING: |
1372 | cfi_spin_unlock(chip->mutex); | 1629 | spin_unlock(chip->mutex); |
1373 | break; | 1630 | break; |
1374 | 1631 | ||
1375 | default: | 1632 | default: |
1376 | /* Not an idle state */ | 1633 | /* Not an idle state */ |
1377 | add_wait_queue(&chip->wq, &wait); | 1634 | add_wait_queue(&chip->wq, &wait); |
1378 | 1635 | ||
1379 | cfi_spin_unlock(chip->mutex); | 1636 | spin_unlock(chip->mutex); |
1380 | 1637 | ||
1381 | schedule(); | 1638 | schedule(); |
1382 | 1639 | ||
@@ -1391,13 +1648,13 @@ static void cfi_amdstd_sync (struct mtd_info *mtd) | |||
1391 | for (i--; i >=0; i--) { | 1648 | for (i--; i >=0; i--) { |
1392 | chip = &cfi->chips[i]; | 1649 | chip = &cfi->chips[i]; |
1393 | 1650 | ||
1394 | cfi_spin_lock(chip->mutex); | 1651 | spin_lock(chip->mutex); |
1395 | 1652 | ||
1396 | if (chip->state == FL_SYNCING) { | 1653 | if (chip->state == FL_SYNCING) { |
1397 | chip->state = chip->oldstate; | 1654 | chip->state = chip->oldstate; |
1398 | wake_up(&chip->wq); | 1655 | wake_up(&chip->wq); |
1399 | } | 1656 | } |
1400 | cfi_spin_unlock(chip->mutex); | 1657 | spin_unlock(chip->mutex); |
1401 | } | 1658 | } |
1402 | } | 1659 | } |
1403 | 1660 | ||
@@ -1413,7 +1670,7 @@ static int cfi_amdstd_suspend(struct mtd_info *mtd) | |||
1413 | for (i=0; !ret && i<cfi->numchips; i++) { | 1670 | for (i=0; !ret && i<cfi->numchips; i++) { |
1414 | chip = &cfi->chips[i]; | 1671 | chip = &cfi->chips[i]; |
1415 | 1672 | ||
1416 | cfi_spin_lock(chip->mutex); | 1673 | spin_lock(chip->mutex); |
1417 | 1674 | ||
1418 | switch(chip->state) { | 1675 | switch(chip->state) { |
1419 | case FL_READY: | 1676 | case FL_READY: |
@@ -1433,7 +1690,7 @@ static int cfi_amdstd_suspend(struct mtd_info *mtd) | |||
1433 | ret = -EAGAIN; | 1690 | ret = -EAGAIN; |
1434 | break; | 1691 | break; |
1435 | } | 1692 | } |
1436 | cfi_spin_unlock(chip->mutex); | 1693 | spin_unlock(chip->mutex); |
1437 | } | 1694 | } |
1438 | 1695 | ||
1439 | /* Unlock the chips again */ | 1696 | /* Unlock the chips again */ |
@@ -1442,13 +1699,13 @@ static int cfi_amdstd_suspend(struct mtd_info *mtd) | |||
1442 | for (i--; i >=0; i--) { | 1699 | for (i--; i >=0; i--) { |
1443 | chip = &cfi->chips[i]; | 1700 | chip = &cfi->chips[i]; |
1444 | 1701 | ||
1445 | cfi_spin_lock(chip->mutex); | 1702 | spin_lock(chip->mutex); |
1446 | 1703 | ||
1447 | if (chip->state == FL_PM_SUSPENDED) { | 1704 | if (chip->state == FL_PM_SUSPENDED) { |
1448 | chip->state = chip->oldstate; | 1705 | chip->state = chip->oldstate; |
1449 | wake_up(&chip->wq); | 1706 | wake_up(&chip->wq); |
1450 | } | 1707 | } |
1451 | cfi_spin_unlock(chip->mutex); | 1708 | spin_unlock(chip->mutex); |
1452 | } | 1709 | } |
1453 | } | 1710 | } |
1454 | 1711 | ||
@@ -1467,7 +1724,7 @@ static void cfi_amdstd_resume(struct mtd_info *mtd) | |||
1467 | 1724 | ||
1468 | chip = &cfi->chips[i]; | 1725 | chip = &cfi->chips[i]; |
1469 | 1726 | ||
1470 | cfi_spin_lock(chip->mutex); | 1727 | spin_lock(chip->mutex); |
1471 | 1728 | ||
1472 | if (chip->state == FL_PM_SUSPENDED) { | 1729 | if (chip->state == FL_PM_SUSPENDED) { |
1473 | chip->state = FL_READY; | 1730 | chip->state = FL_READY; |
@@ -1477,7 +1734,7 @@ static void cfi_amdstd_resume(struct mtd_info *mtd) | |||
1477 | else | 1734 | else |
1478 | printk(KERN_ERR "Argh. Chip not in PM_SUSPENDED state upon resume()\n"); | 1735 | printk(KERN_ERR "Argh. Chip not in PM_SUSPENDED state upon resume()\n"); |
1479 | 1736 | ||
1480 | cfi_spin_unlock(chip->mutex); | 1737 | spin_unlock(chip->mutex); |
1481 | } | 1738 | } |
1482 | } | 1739 | } |
1483 | 1740 | ||
diff --git a/drivers/mtd/chips/fwh_lock.h b/drivers/mtd/chips/fwh_lock.h index fbf44708a861..e1a5b76596c5 100644 --- a/drivers/mtd/chips/fwh_lock.h +++ b/drivers/mtd/chips/fwh_lock.h | |||
@@ -58,10 +58,10 @@ static int fwh_xxlock_oneblock(struct map_info *map, struct flchip *chip, | |||
58 | * to flash memory - that means that we don't have to check status | 58 | * to flash memory - that means that we don't have to check status |
59 | * and timeout. | 59 | * and timeout. |
60 | */ | 60 | */ |
61 | cfi_spin_lock(chip->mutex); | 61 | spin_lock(chip->mutex); |
62 | ret = get_chip(map, chip, adr, FL_LOCKING); | 62 | ret = get_chip(map, chip, adr, FL_LOCKING); |
63 | if (ret) { | 63 | if (ret) { |
64 | cfi_spin_unlock(chip->mutex); | 64 | spin_unlock(chip->mutex); |
65 | return ret; | 65 | return ret; |
66 | } | 66 | } |
67 | 67 | ||
@@ -71,7 +71,7 @@ static int fwh_xxlock_oneblock(struct map_info *map, struct flchip *chip, | |||
71 | /* Done and happy. */ | 71 | /* Done and happy. */ |
72 | chip->state = FL_READY; | 72 | chip->state = FL_READY; |
73 | put_chip(map, chip, adr); | 73 | put_chip(map, chip, adr); |
74 | cfi_spin_unlock(chip->mutex); | 74 | spin_unlock(chip->mutex); |
75 | return 0; | 75 | return 0; |
76 | } | 76 | } |
77 | 77 | ||
diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c index fc982c4671f0..dc065b22f79e 100644 --- a/drivers/mtd/chips/gen_probe.c +++ b/drivers/mtd/chips/gen_probe.c | |||
@@ -2,7 +2,7 @@ | |||
2 | * Routines common to all CFI-type probes. | 2 | * Routines common to all CFI-type probes. |
3 | * (C) 2001-2003 Red Hat, Inc. | 3 | * (C) 2001-2003 Red Hat, Inc. |
4 | * GPL'd | 4 | * GPL'd |
5 | * $Id: gen_probe.c,v 1.21 2004/08/14 15:14:05 dwmw2 Exp $ | 5 | * $Id: gen_probe.c,v 1.22 2005/01/24 23:49:50 rmk Exp $ |
6 | */ | 6 | */ |
7 | 7 | ||
8 | #include <linux/kernel.h> | 8 | #include <linux/kernel.h> |
@@ -162,7 +162,7 @@ static int genprobe_new_chip(struct map_info *map, struct chip_probe *cp, | |||
162 | int max_chips = map_bankwidth(map); /* And minimum 1 */ | 162 | int max_chips = map_bankwidth(map); /* And minimum 1 */ |
163 | int nr_chips, type; | 163 | int nr_chips, type; |
164 | 164 | ||
165 | for (nr_chips = min_chips; nr_chips <= max_chips; nr_chips <<= 1) { | 165 | for (nr_chips = max_chips; nr_chips >= min_chips; nr_chips >>= 1) { |
166 | 166 | ||
167 | if (!cfi_interleave_supported(nr_chips)) | 167 | if (!cfi_interleave_supported(nr_chips)) |
168 | continue; | 168 | continue; |
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index 30325a25ab95..30da428eb7b9 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c | |||
@@ -1,7 +1,7 @@ | |||
1 | /* | 1 | /* |
2 | Common Flash Interface probe code. | 2 | Common Flash Interface probe code. |
3 | (C) 2000 Red Hat. GPL'd. | 3 | (C) 2000 Red Hat. GPL'd. |
4 | $Id: jedec_probe.c,v 1.61 2004/11/19 20:52:16 thayne Exp $ | 4 | $Id: jedec_probe.c,v 1.63 2005/02/14 16:30:32 bjd Exp $ |
5 | See JEDEC (http://www.jedec.org/) standard JESD21C (section 3.5) | 5 | See JEDEC (http://www.jedec.org/) standard JESD21C (section 3.5) |
6 | for the standard this probe goes back to. | 6 | for the standard this probe goes back to. |
7 | 7 | ||
@@ -142,6 +142,7 @@ | |||
142 | #define SST29LE512 0x003d | 142 | #define SST29LE512 0x003d |
143 | #define SST39LF800 0x2781 | 143 | #define SST39LF800 0x2781 |
144 | #define SST39LF160 0x2782 | 144 | #define SST39LF160 0x2782 |
145 | #define SST39VF1601 0x234b | ||
145 | #define SST39LF512 0x00D4 | 146 | #define SST39LF512 0x00D4 |
146 | #define SST39LF010 0x00D5 | 147 | #define SST39LF010 0x00D5 |
147 | #define SST39LF020 0x00D6 | 148 | #define SST39LF020 0x00D6 |
@@ -1448,6 +1449,21 @@ static const struct amd_flash_info jedec_table[] = { | |||
1448 | ERASEINFO(0x1000,256), | 1449 | ERASEINFO(0x1000,256), |
1449 | ERASEINFO(0x1000,256) | 1450 | ERASEINFO(0x1000,256) |
1450 | } | 1451 | } |
1452 | }, { | ||
1453 | .mfr_id = MANUFACTURER_SST, /* should be CFI */ | ||
1454 | .dev_id = SST39VF1601, | ||
1455 | .name = "SST 39VF1601", | ||
1456 | .uaddr = { | ||
1457 | [0] = MTD_UADDR_0x5555_0x2AAA, /* x8 */ | ||
1458 | [1] = MTD_UADDR_0x5555_0x2AAA /* x16 */ | ||
1459 | }, | ||
1460 | .DevSize = SIZE_2MiB, | ||
1461 | .CmdSet = P_ID_AMD_STD, | ||
1462 | .NumEraseRegions= 2, | ||
1463 | .regions = { | ||
1464 | ERASEINFO(0x1000,256), | ||
1465 | ERASEINFO(0x1000,256) | ||
1466 | } | ||
1451 | 1467 | ||
1452 | }, { | 1468 | }, { |
1453 | .mfr_id = MANUFACTURER_ST, /* FIXME - CFI device? */ | 1469 | .mfr_id = MANUFACTURER_ST, /* FIXME - CFI device? */ |
@@ -1856,6 +1872,16 @@ static inline int jedec_match( __u32 base, | |||
1856 | case CFI_DEVICETYPE_X8: | 1872 | case CFI_DEVICETYPE_X8: |
1857 | mfr = (__u8)finfo->mfr_id; | 1873 | mfr = (__u8)finfo->mfr_id; |
1858 | id = (__u8)finfo->dev_id; | 1874 | id = (__u8)finfo->dev_id; |
1875 | |||
1876 | /* bjd: it seems that if we do this, we can end up | ||
1877 | * detecting 16bit flashes as an 8bit device, even though | ||
1878 | * there aren't. | ||
1879 | */ | ||
1880 | if (finfo->dev_id > 0xff) { | ||
1881 | DEBUG( MTD_DEBUG_LEVEL3, "%s(): ID is not 8bit\n", | ||
1882 | __func__); | ||
1883 | goto match_done; | ||
1884 | } | ||
1859 | break; | 1885 | break; |
1860 | case CFI_DEVICETYPE_X16: | 1886 | case CFI_DEVICETYPE_X16: |
1861 | mfr = (__u16)finfo->mfr_id; | 1887 | mfr = (__u16)finfo->mfr_id; |
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c index 60ab4b89a2f9..ef24837019d3 100644 --- a/drivers/mtd/cmdlinepart.c +++ b/drivers/mtd/cmdlinepart.c | |||
@@ -1,5 +1,5 @@ | |||
1 | /* | 1 | /* |
2 | * $Id: cmdlinepart.c,v 1.17 2004/11/26 11:18:47 lavinen Exp $ | 2 | * $Id: cmdlinepart.c,v 1.18 2005/06/07 15:04:26 joern Exp $ |
3 | * | 3 | * |
4 | * Read flash partition table from command line | 4 | * Read flash partition table from command line |
5 | * | 5 | * |
@@ -239,7 +239,8 @@ static int mtdpart_setup_real(char *s) | |||
239 | &num_parts, /* out: number of parts */ | 239 | &num_parts, /* out: number of parts */ |
240 | 0, /* first partition */ | 240 | 0, /* first partition */ |
241 | (unsigned char**)&this_mtd, /* out: extra mem */ | 241 | (unsigned char**)&this_mtd, /* out: extra mem */ |
242 | mtd_id_len + 1 + sizeof(*this_mtd)); | 242 | mtd_id_len + 1 + sizeof(*this_mtd) + |
243 | sizeof(void*)-1 /*alignment*/); | ||
243 | if(!parts) | 244 | if(!parts) |
244 | { | 245 | { |
245 | /* | 246 | /* |
@@ -252,6 +253,9 @@ static int mtdpart_setup_real(char *s) | |||
252 | return 0; | 253 | return 0; |
253 | } | 254 | } |
254 | 255 | ||
256 | /* align this_mtd */ | ||
257 | this_mtd = (struct cmdline_mtd_partition *) | ||
258 | ALIGN((unsigned long)this_mtd, sizeof(void*)); | ||
255 | /* enter results */ | 259 | /* enter results */ |
256 | this_mtd->parts = parts; | 260 | this_mtd->parts = parts; |
257 | this_mtd->num_parts = num_parts; | 261 | this_mtd->num_parts = num_parts; |
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c index cfe6ccf07972..4a7a805e7564 100644 --- a/drivers/mtd/devices/block2mtd.c +++ b/drivers/mtd/devices/block2mtd.c | |||
@@ -1,10 +1,9 @@ | |||
1 | /* | 1 | /* |
2 | * $Id: block2mtd.c,v 1.23 2005/01/05 17:05:46 dwmw2 Exp $ | 2 | * $Id: block2mtd.c,v 1.28 2005/03/19 22:40:44 gleixner Exp $ |
3 | * | 3 | * |
4 | * block2mtd.c - create an mtd from a block device | 4 | * block2mtd.c - create an mtd from a block device |
5 | * | 5 | * |
6 | * Copyright (C) 2001,2002 Simon Evans <spse@secret.org.uk> | 6 | * Copyright (C) 2001,2002 Simon Evans <spse@secret.org.uk> |
7 | * Copyright (C) 2004 Gareth Bult <Gareth@Encryptec.net> | ||
8 | * Copyright (C) 2004,2005 Jörn Engel <joern@wh.fh-wedel.de> | 7 | * Copyright (C) 2004,2005 Jörn Engel <joern@wh.fh-wedel.de> |
9 | * | 8 | * |
10 | * Licence: GPL | 9 | * Licence: GPL |
@@ -20,7 +19,7 @@ | |||
20 | #include <linux/mtd/mtd.h> | 19 | #include <linux/mtd/mtd.h> |
21 | #include <linux/buffer_head.h> | 20 | #include <linux/buffer_head.h> |
22 | 21 | ||
23 | #define VERSION "$Revision: 1.23 $" | 22 | #define VERSION "$Revision: 1.28 $" |
24 | 23 | ||
25 | 24 | ||
26 | #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args) | 25 | #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args) |
@@ -89,7 +88,6 @@ void cache_readahead(struct address_space *mapping, int index) | |||
89 | static struct page* page_readahead(struct address_space *mapping, int index) | 88 | static struct page* page_readahead(struct address_space *mapping, int index) |
90 | { | 89 | { |
91 | filler_t *filler = (filler_t*)mapping->a_ops->readpage; | 90 | filler_t *filler = (filler_t*)mapping->a_ops->readpage; |
92 | //do_page_cache_readahead(mapping, index, XXX, 64); | ||
93 | cache_readahead(mapping, index); | 91 | cache_readahead(mapping, index); |
94 | return read_cache_page(mapping, index, filler, NULL); | 92 | return read_cache_page(mapping, index, filler, NULL); |
95 | } | 93 | } |
@@ -157,7 +155,7 @@ static int block2mtd_read(struct mtd_info *mtd, loff_t from, size_t len, | |||
157 | struct block2mtd_dev *dev = mtd->priv; | 155 | struct block2mtd_dev *dev = mtd->priv; |
158 | struct page *page; | 156 | struct page *page; |
159 | int index = from >> PAGE_SHIFT; | 157 | int index = from >> PAGE_SHIFT; |
160 | int offset = from & (PAGE_SHIFT-1); | 158 | int offset = from & (PAGE_SIZE-1); |
161 | int cpylen; | 159 | int cpylen; |
162 | 160 | ||
163 | if (from > mtd->size) | 161 | if (from > mtd->size) |
@@ -370,16 +368,16 @@ static int ustrtoul(const char *cp, char **endp, unsigned int base) | |||
370 | } | 368 | } |
371 | 369 | ||
372 | 370 | ||
373 | static int parse_num32(u32 *num32, const char *token) | 371 | static int parse_num(size_t *num, const char *token) |
374 | { | 372 | { |
375 | char *endp; | 373 | char *endp; |
376 | unsigned long n; | 374 | size_t n; |
377 | 375 | ||
378 | n = ustrtoul(token, &endp, 0); | 376 | n = (size_t) ustrtoul(token, &endp, 0); |
379 | if (*endp) | 377 | if (*endp) |
380 | return -EINVAL; | 378 | return -EINVAL; |
381 | 379 | ||
382 | *num32 = n; | 380 | *num = n; |
383 | return 0; | 381 | return 0; |
384 | } | 382 | } |
385 | 383 | ||
@@ -422,7 +420,7 @@ static int block2mtd_setup(const char *val, struct kernel_param *kp) | |||
422 | char buf[80+12], *str=buf; /* 80 for device, 12 for erase size */ | 420 | char buf[80+12], *str=buf; /* 80 for device, 12 for erase size */ |
423 | char *token[2]; | 421 | char *token[2]; |
424 | char *name; | 422 | char *name; |
425 | u32 erase_size = PAGE_SIZE; | 423 | size_t erase_size = PAGE_SIZE; |
426 | int i, ret; | 424 | int i, ret; |
427 | 425 | ||
428 | if (strnlen(val, sizeof(buf)) >= sizeof(buf)) | 426 | if (strnlen(val, sizeof(buf)) >= sizeof(buf)) |
@@ -449,7 +447,7 @@ static int block2mtd_setup(const char *val, struct kernel_param *kp) | |||
449 | return 0; | 447 | return 0; |
450 | 448 | ||
451 | if (token[1]) { | 449 | if (token[1]) { |
452 | ret = parse_num32(&erase_size, token[1]); | 450 | ret = parse_num(&erase_size, token[1]); |
453 | if (ret) | 451 | if (ret) |
454 | parse_err("illegal erase size"); | 452 | parse_err("illegal erase size"); |
455 | } | 453 | } |
diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c index 380ff08d29e4..f5026cee087f 100644 --- a/drivers/mtd/devices/ms02-nv.c +++ b/drivers/mtd/devices/ms02-nv.c | |||
@@ -6,7 +6,7 @@ | |||
6 | * as published by the Free Software Foundation; either version | 6 | * as published by the Free Software Foundation; either version |
7 | * 2 of the License, or (at your option) any later version. | 7 | * 2 of the License, or (at your option) any later version. |
8 | * | 8 | * |
9 | * $Id: ms02-nv.c,v 1.8 2005/01/05 18:05:12 dwmw2 Exp $ | 9 | * $Id: ms02-nv.c,v 1.10 2005/06/20 12:24:41 macro Exp $ |
10 | */ | 10 | */ |
11 | 11 | ||
12 | #include <linux/init.h> | 12 | #include <linux/init.h> |
@@ -99,8 +99,8 @@ static inline uint ms02nv_probe_one(ulong addr) | |||
99 | * The firmware writes MS02NV_ID at MS02NV_MAGIC and also | 99 | * The firmware writes MS02NV_ID at MS02NV_MAGIC and also |
100 | * a diagnostic status at MS02NV_DIAG. | 100 | * a diagnostic status at MS02NV_DIAG. |
101 | */ | 101 | */ |
102 | ms02nv_diagp = (ms02nv_uint *)(KSEG1ADDR(addr + MS02NV_DIAG)); | 102 | ms02nv_diagp = (ms02nv_uint *)(CKSEG1ADDR(addr + MS02NV_DIAG)); |
103 | ms02nv_magicp = (ms02nv_uint *)(KSEG1ADDR(addr + MS02NV_MAGIC)); | 103 | ms02nv_magicp = (ms02nv_uint *)(CKSEG1ADDR(addr + MS02NV_MAGIC)); |
104 | err = get_dbe(ms02nv_magic, ms02nv_magicp); | 104 | err = get_dbe(ms02nv_magic, ms02nv_magicp); |
105 | if (err) | 105 | if (err) |
106 | return 0; | 106 | return 0; |
@@ -233,7 +233,7 @@ static int __init ms02nv_init_one(ulong addr) | |||
233 | goto err_out_csr_res; | 233 | goto err_out_csr_res; |
234 | } | 234 | } |
235 | 235 | ||
236 | printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %uMiB.\n", | 236 | printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %zuMiB.\n", |
237 | mtd->index, ms02nv_name, addr, size >> 20); | 237 | mtd->index, ms02nv_name, addr, size >> 20); |
238 | 238 | ||
239 | mp->next = root_ms02nv_mtd; | 239 | mp->next = root_ms02nv_mtd; |
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c index edac4156d69c..bb713fed2f37 100644 --- a/drivers/mtd/devices/mtdram.c +++ b/drivers/mtd/devices/mtdram.c | |||
@@ -1,9 +1,10 @@ | |||
1 | /* | 1 | /* |
2 | * mtdram - a test mtd device | 2 | * mtdram - a test mtd device |
3 | * $Id: mtdram.c,v 1.35 2005/01/05 18:05:12 dwmw2 Exp $ | 3 | * $Id: mtdram.c,v 1.37 2005/04/21 03:42:11 joern Exp $ |
4 | * Author: Alexander Larsson <alex@cendio.se> | 4 | * Author: Alexander Larsson <alex@cendio.se> |
5 | * | 5 | * |
6 | * Copyright (c) 1999 Alexander Larsson <alex@cendio.se> | 6 | * Copyright (c) 1999 Alexander Larsson <alex@cendio.se> |
7 | * Copyright (c) 2005 Joern Engel <joern@wh.fh-wedel.de> | ||
7 | * | 8 | * |
8 | * This code is GPL | 9 | * This code is GPL |
9 | * | 10 | * |
@@ -18,213 +19,140 @@ | |||
18 | #include <linux/mtd/compatmac.h> | 19 | #include <linux/mtd/compatmac.h> |
19 | #include <linux/mtd/mtd.h> | 20 | #include <linux/mtd/mtd.h> |
20 | 21 | ||
21 | #ifndef CONFIG_MTDRAM_ABS_POS | ||
22 | #define CONFIG_MTDRAM_ABS_POS 0 | ||
23 | #endif | ||
24 | |||
25 | #if CONFIG_MTDRAM_ABS_POS > 0 | ||
26 | #include <asm/io.h> | ||
27 | #endif | ||
28 | |||
29 | #ifdef MODULE | ||
30 | static unsigned long total_size = CONFIG_MTDRAM_TOTAL_SIZE; | 22 | static unsigned long total_size = CONFIG_MTDRAM_TOTAL_SIZE; |
31 | static unsigned long erase_size = CONFIG_MTDRAM_ERASE_SIZE; | 23 | static unsigned long erase_size = CONFIG_MTDRAM_ERASE_SIZE; |
32 | module_param(total_size,ulong,0); | ||
33 | MODULE_PARM_DESC(total_size, "Total device size in KiB"); | ||
34 | module_param(erase_size,ulong,0); | ||
35 | MODULE_PARM_DESC(erase_size, "Device erase block size in KiB"); | ||
36 | #define MTDRAM_TOTAL_SIZE (total_size * 1024) | 24 | #define MTDRAM_TOTAL_SIZE (total_size * 1024) |
37 | #define MTDRAM_ERASE_SIZE (erase_size * 1024) | 25 | #define MTDRAM_ERASE_SIZE (erase_size * 1024) |
38 | #else | ||
39 | #define MTDRAM_TOTAL_SIZE (CONFIG_MTDRAM_TOTAL_SIZE * 1024) | ||
40 | #define MTDRAM_ERASE_SIZE (CONFIG_MTDRAM_ERASE_SIZE * 1024) | ||
41 | #endif | ||
42 | 26 | ||
27 | #ifdef MODULE | ||
28 | module_param(total_size, ulong, 0); | ||
29 | MODULE_PARM_DESC(total_size, "Total device size in KiB"); | ||
30 | module_param(erase_size, ulong, 0); | ||
31 | MODULE_PARM_DESC(erase_size, "Device erase block size in KiB"); | ||
32 | #endif | ||
43 | 33 | ||
44 | // We could store these in the mtd structure, but we only support 1 device.. | 34 | // We could store these in the mtd structure, but we only support 1 device.. |
45 | static struct mtd_info *mtd_info; | 35 | static struct mtd_info *mtd_info; |
46 | 36 | ||
47 | 37 | static int ram_erase(struct mtd_info *mtd, struct erase_info *instr) | |
48 | static int | ||
49 | ram_erase(struct mtd_info *mtd, struct erase_info *instr) | ||
50 | { | 38 | { |
51 | DEBUG(MTD_DEBUG_LEVEL2, "ram_erase(pos:%ld, len:%ld)\n", (long)instr->addr, (long)instr->len); | 39 | if (instr->addr + instr->len > mtd->size) |
52 | if (instr->addr + instr->len > mtd->size) { | 40 | return -EINVAL; |
53 | DEBUG(MTD_DEBUG_LEVEL1, "ram_erase() out of bounds (%ld > %ld)\n", (long)(instr->addr + instr->len), (long)mtd->size); | 41 | |
54 | return -EINVAL; | 42 | memset((char *)mtd->priv + instr->addr, 0xff, instr->len); |
55 | } | 43 | |
56 | 44 | instr->state = MTD_ERASE_DONE; | |
57 | memset((char *)mtd->priv + instr->addr, 0xff, instr->len); | 45 | mtd_erase_callback(instr); |
58 | 46 | ||
59 | instr->state = MTD_ERASE_DONE; | 47 | return 0; |
60 | mtd_erase_callback(instr); | ||
61 | |||
62 | return 0; | ||
63 | } | 48 | } |
64 | 49 | ||
65 | static int ram_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf) | 50 | static int ram_point(struct mtd_info *mtd, loff_t from, size_t len, |
51 | size_t *retlen, u_char **mtdbuf) | ||
66 | { | 52 | { |
67 | if (from + len > mtd->size) | 53 | if (from + len > mtd->size) |
68 | return -EINVAL; | 54 | return -EINVAL; |
69 | 55 | ||
70 | *mtdbuf = mtd->priv + from; | 56 | *mtdbuf = mtd->priv + from; |
71 | *retlen = len; | 57 | *retlen = len; |
72 | return 0; | 58 | return 0; |
73 | } | 59 | } |
74 | 60 | ||
75 | static void ram_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, | 61 | static void ram_unpoint(struct mtd_info *mtd, u_char * addr, loff_t from, |
76 | size_t len) | 62 | size_t len) |
77 | { | 63 | { |
78 | DEBUG(MTD_DEBUG_LEVEL2, "ram_unpoint\n"); | ||
79 | } | 64 | } |
80 | 65 | ||
81 | static int ram_read(struct mtd_info *mtd, loff_t from, size_t len, | 66 | static int ram_read(struct mtd_info *mtd, loff_t from, size_t len, |
82 | size_t *retlen, u_char *buf) | 67 | size_t *retlen, u_char *buf) |
83 | { | 68 | { |
84 | DEBUG(MTD_DEBUG_LEVEL2, "ram_read(pos:%ld, len:%ld)\n", (long)from, (long)len); | 69 | if (from + len > mtd->size) |
85 | if (from + len > mtd->size) { | 70 | return -EINVAL; |
86 | DEBUG(MTD_DEBUG_LEVEL1, "ram_read() out of bounds (%ld > %ld)\n", (long)(from + len), (long)mtd->size); | ||
87 | return -EINVAL; | ||
88 | } | ||
89 | 71 | ||
90 | memcpy(buf, mtd->priv + from, len); | 72 | memcpy(buf, mtd->priv + from, len); |
91 | 73 | ||
92 | *retlen=len; | 74 | *retlen = len; |
93 | return 0; | 75 | return 0; |
94 | } | 76 | } |
95 | 77 | ||
96 | static int ram_write(struct mtd_info *mtd, loff_t to, size_t len, | 78 | static int ram_write(struct mtd_info *mtd, loff_t to, size_t len, |
97 | size_t *retlen, const u_char *buf) | 79 | size_t *retlen, const u_char *buf) |
98 | { | 80 | { |
99 | DEBUG(MTD_DEBUG_LEVEL2, "ram_write(pos:%ld, len:%ld)\n", (long)to, (long)len); | 81 | if (to + len > mtd->size) |
100 | if (to + len > mtd->size) { | 82 | return -EINVAL; |
101 | DEBUG(MTD_DEBUG_LEVEL1, "ram_write() out of bounds (%ld > %ld)\n", (long)(to + len), (long)mtd->size); | ||
102 | return -EINVAL; | ||
103 | } | ||
104 | 83 | ||
105 | memcpy ((char *)mtd->priv + to, buf, len); | 84 | memcpy((char *)mtd->priv + to, buf, len); |
106 | 85 | ||
107 | *retlen=len; | 86 | *retlen = len; |
108 | return 0; | 87 | return 0; |
109 | } | 88 | } |
110 | 89 | ||
111 | static void __exit cleanup_mtdram(void) | 90 | static void __exit cleanup_mtdram(void) |
112 | { | 91 | { |
113 | if (mtd_info) { | 92 | if (mtd_info) { |
114 | del_mtd_device(mtd_info); | 93 | del_mtd_device(mtd_info); |
115 | #if CONFIG_MTDRAM_TOTAL_SIZE > 0 | 94 | if (mtd_info->priv) |
116 | if (mtd_info->priv) | 95 | vfree(mtd_info->priv); |
117 | #if CONFIG_MTDRAM_ABS_POS > 0 | 96 | kfree(mtd_info); |
118 | iounmap(mtd_info->priv); | 97 | } |
119 | #else | ||
120 | vfree(mtd_info->priv); | ||
121 | #endif | ||
122 | #endif | ||
123 | kfree(mtd_info); | ||
124 | } | ||
125 | } | ||
126 | |||
127 | int mtdram_init_device(struct mtd_info *mtd, void *mapped_address, | ||
128 | unsigned long size, char *name) | ||
129 | { | ||
130 | memset(mtd, 0, sizeof(*mtd)); | ||
131 | |||
132 | /* Setup the MTD structure */ | ||
133 | mtd->name = name; | ||
134 | mtd->type = MTD_RAM; | ||
135 | mtd->flags = MTD_CAP_RAM; | ||
136 | mtd->size = size; | ||
137 | mtd->erasesize = MTDRAM_ERASE_SIZE; | ||
138 | mtd->priv = mapped_address; | ||
139 | |||
140 | mtd->owner = THIS_MODULE; | ||
141 | mtd->erase = ram_erase; | ||
142 | mtd->point = ram_point; | ||
143 | mtd->unpoint = ram_unpoint; | ||
144 | mtd->read = ram_read; | ||
145 | mtd->write = ram_write; | ||
146 | |||
147 | if (add_mtd_device(mtd)) { | ||
148 | return -EIO; | ||
149 | } | ||
150 | |||
151 | return 0; | ||
152 | } | ||
153 | |||
154 | #if CONFIG_MTDRAM_TOTAL_SIZE > 0 | ||
155 | #if CONFIG_MTDRAM_ABS_POS > 0 | ||
156 | static int __init init_mtdram(void) | ||
157 | { | ||
158 | void *addr; | ||
159 | int err; | ||
160 | /* Allocate some memory */ | ||
161 | mtd_info = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); | ||
162 | if (!mtd_info) | ||
163 | return -ENOMEM; | ||
164 | |||
165 | addr = ioremap(CONFIG_MTDRAM_ABS_POS, MTDRAM_TOTAL_SIZE); | ||
166 | if (!addr) { | ||
167 | DEBUG(MTD_DEBUG_LEVEL1, | ||
168 | "Failed to ioremap) memory region of size %ld at ABS_POS:%ld\n", | ||
169 | (long)MTDRAM_TOTAL_SIZE, (long)CONFIG_MTDRAM_ABS_POS); | ||
170 | kfree(mtd_info); | ||
171 | mtd_info = NULL; | ||
172 | return -ENOMEM; | ||
173 | } | ||
174 | err = mtdram_init_device(mtd_info, addr, | ||
175 | MTDRAM_TOTAL_SIZE, "mtdram test device"); | ||
176 | if (err) | ||
177 | { | ||
178 | iounmap(addr); | ||
179 | kfree(mtd_info); | ||
180 | mtd_info = NULL; | ||
181 | return err; | ||
182 | } | ||
183 | memset(mtd_info->priv, 0xff, MTDRAM_TOTAL_SIZE); | ||
184 | return err; | ||
185 | } | 98 | } |
186 | 99 | ||
187 | #else /* CONFIG_MTDRAM_ABS_POS > 0 */ | 100 | int mtdram_init_device(struct mtd_info *mtd, void *mapped_address, |
188 | 101 | unsigned long size, char *name) | |
189 | static int __init init_mtdram(void) | ||
190 | { | 102 | { |
191 | void *addr; | 103 | memset(mtd, 0, sizeof(*mtd)); |
192 | int err; | 104 | |
193 | /* Allocate some memory */ | 105 | /* Setup the MTD structure */ |
194 | mtd_info = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); | 106 | mtd->name = name; |
195 | if (!mtd_info) | 107 | mtd->type = MTD_RAM; |
196 | return -ENOMEM; | 108 | mtd->flags = MTD_CAP_RAM; |
197 | 109 | mtd->size = size; | |
198 | addr = vmalloc(MTDRAM_TOTAL_SIZE); | 110 | mtd->erasesize = MTDRAM_ERASE_SIZE; |
199 | if (!addr) { | 111 | mtd->priv = mapped_address; |
200 | DEBUG(MTD_DEBUG_LEVEL1, | 112 | |
201 | "Failed to vmalloc memory region of size %ld\n", | 113 | mtd->owner = THIS_MODULE; |
202 | (long)MTDRAM_TOTAL_SIZE); | 114 | mtd->erase = ram_erase; |
203 | kfree(mtd_info); | 115 | mtd->point = ram_point; |
204 | mtd_info = NULL; | 116 | mtd->unpoint = ram_unpoint; |
205 | return -ENOMEM; | 117 | mtd->read = ram_read; |
206 | } | 118 | mtd->write = ram_write; |
207 | err = mtdram_init_device(mtd_info, addr, | 119 | |
208 | MTDRAM_TOTAL_SIZE, "mtdram test device"); | 120 | if (add_mtd_device(mtd)) { |
209 | if (err) | 121 | return -EIO; |
210 | { | 122 | } |
211 | vfree(addr); | 123 | |
212 | kfree(mtd_info); | 124 | return 0; |
213 | mtd_info = NULL; | ||
214 | return err; | ||
215 | } | ||
216 | memset(mtd_info->priv, 0xff, MTDRAM_TOTAL_SIZE); | ||
217 | return err; | ||
218 | } | 125 | } |
219 | #endif /* !(CONFIG_MTDRAM_ABS_POS > 0) */ | ||
220 | |||
221 | #else /* CONFIG_MTDRAM_TOTAL_SIZE > 0 */ | ||
222 | 126 | ||
223 | static int __init init_mtdram(void) | 127 | static int __init init_mtdram(void) |
224 | { | 128 | { |
225 | return 0; | 129 | void *addr; |
130 | int err; | ||
131 | |||
132 | if (!total_size) | ||
133 | return -EINVAL; | ||
134 | |||
135 | /* Allocate some memory */ | ||
136 | mtd_info = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); | ||
137 | if (!mtd_info) | ||
138 | return -ENOMEM; | ||
139 | |||
140 | addr = vmalloc(MTDRAM_TOTAL_SIZE); | ||
141 | if (!addr) { | ||
142 | kfree(mtd_info); | ||
143 | mtd_info = NULL; | ||
144 | return -ENOMEM; | ||
145 | } | ||
146 | err = mtdram_init_device(mtd_info, addr, MTDRAM_TOTAL_SIZE, "mtdram test device"); | ||
147 | if (err) { | ||
148 | vfree(addr); | ||
149 | kfree(mtd_info); | ||
150 | mtd_info = NULL; | ||
151 | return err; | ||
152 | } | ||
153 | memset(mtd_info->priv, 0xff, MTDRAM_TOTAL_SIZE); | ||
154 | return err; | ||
226 | } | 155 | } |
227 | #endif /* !(CONFIG_MTDRAM_TOTAL_SIZE > 0) */ | ||
228 | 156 | ||
229 | module_init(init_mtdram); | 157 | module_init(init_mtdram); |
230 | module_exit(cleanup_mtdram); | 158 | module_exit(cleanup_mtdram); |
@@ -232,4 +160,3 @@ module_exit(cleanup_mtdram); | |||
232 | MODULE_LICENSE("GPL"); | 160 | MODULE_LICENSE("GPL"); |
233 | MODULE_AUTHOR("Alexander Larsson <alexl@redhat.com>"); | 161 | MODULE_AUTHOR("Alexander Larsson <alexl@redhat.com>"); |
234 | MODULE_DESCRIPTION("Simulated MTD driver for testing"); | 162 | MODULE_DESCRIPTION("Simulated MTD driver for testing"); |
235 | |||
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index 5f8e164ddb71..a423a382095a 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c | |||
@@ -1,5 +1,5 @@ | |||
1 | /** | 1 | /** |
2 | * $Id: phram.c,v 1.11 2005/01/05 18:05:13 dwmw2 Exp $ | 2 | * $Id: phram.c,v 1.14 2005/03/07 21:43:38 joern Exp $ |
3 | * | 3 | * |
4 | * Copyright (c) ???? Jochen Schäuble <psionic@psionic.de> | 4 | * Copyright (c) ???? Jochen Schäuble <psionic@psionic.de> |
5 | * Copyright (c) 2003-2004 Jörn Engel <joern@wh.fh-wedel.de> | 5 | * Copyright (c) 2003-2004 Jörn Engel <joern@wh.fh-wedel.de> |
@@ -15,9 +15,7 @@ | |||
15 | * | 15 | * |
16 | * Example: | 16 | * Example: |
17 | * phram=swap,64Mi,128Mi phram=test,900Mi,1Mi | 17 | * phram=swap,64Mi,128Mi phram=test,900Mi,1Mi |
18 | * | ||
19 | */ | 18 | */ |
20 | |||
21 | #include <asm/io.h> | 19 | #include <asm/io.h> |
22 | #include <linux/init.h> | 20 | #include <linux/init.h> |
23 | #include <linux/kernel.h> | 21 | #include <linux/kernel.h> |
@@ -36,7 +34,6 @@ struct phram_mtd_list { | |||
36 | static LIST_HEAD(phram_list); | 34 | static LIST_HEAD(phram_list); |
37 | 35 | ||
38 | 36 | ||
39 | |||
40 | static int phram_erase(struct mtd_info *mtd, struct erase_info *instr) | 37 | static int phram_erase(struct mtd_info *mtd, struct erase_info *instr) |
41 | { | 38 | { |
42 | u_char *start = mtd->priv; | 39 | u_char *start = mtd->priv; |
@@ -71,7 +68,8 @@ static int phram_point(struct mtd_info *mtd, loff_t from, size_t len, | |||
71 | return 0; | 68 | return 0; |
72 | } | 69 | } |
73 | 70 | ||
74 | static void phram_unpoint(struct mtd_info *mtd, u_char *addr, loff_t from, size_t len) | 71 | static void phram_unpoint(struct mtd_info *mtd, u_char *addr, loff_t from, |
72 | size_t len) | ||
75 | { | 73 | { |
76 | } | 74 | } |
77 | 75 | ||
@@ -80,8 +78,11 @@ static int phram_read(struct mtd_info *mtd, loff_t from, size_t len, | |||
80 | { | 78 | { |
81 | u_char *start = mtd->priv; | 79 | u_char *start = mtd->priv; |
82 | 80 | ||
83 | if (from + len > mtd->size) | 81 | if (from >= mtd->size) |
84 | return -EINVAL; | 82 | return -EINVAL; |
83 | |||
84 | if (len > mtd->size - from) | ||
85 | len = mtd->size - from; | ||
85 | 86 | ||
86 | memcpy(buf, start + from, len); | 87 | memcpy(buf, start + from, len); |
87 | 88 | ||
@@ -94,8 +95,11 @@ static int phram_write(struct mtd_info *mtd, loff_t to, size_t len, | |||
94 | { | 95 | { |
95 | u_char *start = mtd->priv; | 96 | u_char *start = mtd->priv; |
96 | 97 | ||
97 | if (to + len > mtd->size) | 98 | if (to >= mtd->size) |
98 | return -EINVAL; | 99 | return -EINVAL; |
100 | |||
101 | if (len > mtd->size - to) | ||
102 | len = mtd->size - to; | ||
99 | 103 | ||
100 | memcpy(start + to, buf, len); | 104 | memcpy(start + to, buf, len); |
101 | 105 | ||
@@ -107,9 +111,9 @@ static int phram_write(struct mtd_info *mtd, loff_t to, size_t len, | |||
107 | 111 | ||
108 | static void unregister_devices(void) | 112 | static void unregister_devices(void) |
109 | { | 113 | { |
110 | struct phram_mtd_list *this; | 114 | struct phram_mtd_list *this, *safe; |
111 | 115 | ||
112 | list_for_each_entry(this, &phram_list, list) { | 116 | list_for_each_entry_safe(this, safe, &phram_list, list) { |
113 | del_mtd_device(&this->mtd); | 117 | del_mtd_device(&this->mtd); |
114 | iounmap(this->mtd.priv); | 118 | iounmap(this->mtd.priv); |
115 | kfree(this); | 119 | kfree(this); |
@@ -145,7 +149,7 @@ static int register_device(char *name, unsigned long start, unsigned long len) | |||
145 | new->mtd.write = phram_write; | 149 | new->mtd.write = phram_write; |
146 | new->mtd.owner = THIS_MODULE; | 150 | new->mtd.owner = THIS_MODULE; |
147 | new->mtd.type = MTD_RAM; | 151 | new->mtd.type = MTD_RAM; |
148 | new->mtd.erasesize = 0; | 152 | new->mtd.erasesize = PAGE_SIZE; |
149 | 153 | ||
150 | ret = -EAGAIN; | 154 | ret = -EAGAIN; |
151 | if (add_mtd_device(&new->mtd)) { | 155 | if (add_mtd_device(&new->mtd)) { |
@@ -214,6 +218,15 @@ static int parse_name(char **pname, const char *token) | |||
214 | return 0; | 218 | return 0; |
215 | } | 219 | } |
216 | 220 | ||
221 | |||
222 | static inline void kill_final_newline(char *str) | ||
223 | { | ||
224 | char *newline = strrchr(str, '\n'); | ||
225 | if (newline && !newline[1]) | ||
226 | *newline = 0; | ||
227 | } | ||
228 | |||
229 | |||
217 | #define parse_err(fmt, args...) do { \ | 230 | #define parse_err(fmt, args...) do { \ |
218 | ERROR(fmt , ## args); \ | 231 | ERROR(fmt , ## args); \ |
219 | return 0; \ | 232 | return 0; \ |
@@ -232,6 +245,7 @@ static int phram_setup(const char *val, struct kernel_param *kp) | |||
232 | parse_err("parameter too long\n"); | 245 | parse_err("parameter too long\n"); |
233 | 246 | ||
234 | strcpy(str, val); | 247 | strcpy(str, val); |
248 | kill_final_newline(str); | ||
235 | 249 | ||
236 | for (i=0; i<3; i++) | 250 | for (i=0; i<3; i++) |
237 | token[i] = strsep(&str, ","); | 251 | token[i] = strsep(&str, ","); |
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 5ab15e643be7..84fa91392a8c 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c | |||
@@ -1,6 +1,6 @@ | |||
1 | /*====================================================================== | 1 | /*====================================================================== |
2 | 2 | ||
3 | $Id: slram.c,v 1.33 2005/01/05 18:05:13 dwmw2 Exp $ | 3 | $Id: slram.c,v 1.34 2005/01/06 21:16:42 jwboyer Exp $ |
4 | 4 | ||
5 | This driver provides a method to access memory not used by the kernel | 5 | This driver provides a method to access memory not used by the kernel |
6 | itself (i.e. if the kernel commandline mem=xxx is used). To actually | 6 | itself (i.e. if the kernel commandline mem=xxx is used). To actually |
@@ -50,6 +50,7 @@ | |||
50 | #include <linux/mtd/mtd.h> | 50 | #include <linux/mtd/mtd.h> |
51 | 51 | ||
52 | #define SLRAM_MAX_DEVICES_PARAMS 6 /* 3 parameters / device */ | 52 | #define SLRAM_MAX_DEVICES_PARAMS 6 /* 3 parameters / device */ |
53 | #define SLRAM_BLK_SZ 0x4000 | ||
53 | 54 | ||
54 | #define T(fmt, args...) printk(KERN_DEBUG fmt, ## args) | 55 | #define T(fmt, args...) printk(KERN_DEBUG fmt, ## args) |
55 | #define E(fmt, args...) printk(KERN_NOTICE fmt, ## args) | 56 | #define E(fmt, args...) printk(KERN_NOTICE fmt, ## args) |
@@ -108,6 +109,9 @@ static int slram_point(struct mtd_info *mtd, loff_t from, size_t len, | |||
108 | { | 109 | { |
109 | slram_priv_t *priv = mtd->priv; | 110 | slram_priv_t *priv = mtd->priv; |
110 | 111 | ||
112 | if (from + len > mtd->size) | ||
113 | return -EINVAL; | ||
114 | |||
111 | *mtdbuf = priv->start + from; | 115 | *mtdbuf = priv->start + from; |
112 | *retlen = len; | 116 | *retlen = len; |
113 | return(0); | 117 | return(0); |
@@ -121,7 +125,13 @@ static int slram_read(struct mtd_info *mtd, loff_t from, size_t len, | |||
121 | size_t *retlen, u_char *buf) | 125 | size_t *retlen, u_char *buf) |
122 | { | 126 | { |
123 | slram_priv_t *priv = mtd->priv; | 127 | slram_priv_t *priv = mtd->priv; |
124 | 128 | ||
129 | if (from > mtd->size) | ||
130 | return -EINVAL; | ||
131 | |||
132 | if (from + len > mtd->size) | ||
133 | len = mtd->size - from; | ||
134 | |||
125 | memcpy(buf, priv->start + from, len); | 135 | memcpy(buf, priv->start + from, len); |
126 | 136 | ||
127 | *retlen = len; | 137 | *retlen = len; |
@@ -133,6 +143,9 @@ static int slram_write(struct mtd_info *mtd, loff_t to, size_t len, | |||
133 | { | 143 | { |
134 | slram_priv_t *priv = mtd->priv; | 144 | slram_priv_t *priv = mtd->priv; |
135 | 145 | ||
146 | if (to + len > mtd->size) | ||
147 | return -EINVAL; | ||
148 | |||
136 | memcpy(priv->start + to, buf, len); | 149 | memcpy(priv->start + to, buf, len); |
137 | 150 | ||
138 | *retlen = len; | 151 | *retlen = len; |
@@ -188,7 +201,7 @@ static int register_device(char *name, unsigned long start, unsigned long length | |||
188 | (*curmtd)->mtdinfo->name = name; | 201 | (*curmtd)->mtdinfo->name = name; |
189 | (*curmtd)->mtdinfo->size = length; | 202 | (*curmtd)->mtdinfo->size = length; |
190 | (*curmtd)->mtdinfo->flags = MTD_CLEAR_BITS | MTD_SET_BITS | | 203 | (*curmtd)->mtdinfo->flags = MTD_CLEAR_BITS | MTD_SET_BITS | |
191 | MTD_WRITEB_WRITEABLE | MTD_VOLATILE; | 204 | MTD_WRITEB_WRITEABLE | MTD_VOLATILE | MTD_CAP_RAM; |
192 | (*curmtd)->mtdinfo->erase = slram_erase; | 205 | (*curmtd)->mtdinfo->erase = slram_erase; |
193 | (*curmtd)->mtdinfo->point = slram_point; | 206 | (*curmtd)->mtdinfo->point = slram_point; |
194 | (*curmtd)->mtdinfo->unpoint = slram_unpoint; | 207 | (*curmtd)->mtdinfo->unpoint = slram_unpoint; |
@@ -196,7 +209,7 @@ static int register_device(char *name, unsigned long start, unsigned long length | |||
196 | (*curmtd)->mtdinfo->write = slram_write; | 209 | (*curmtd)->mtdinfo->write = slram_write; |
197 | (*curmtd)->mtdinfo->owner = THIS_MODULE; | 210 | (*curmtd)->mtdinfo->owner = THIS_MODULE; |
198 | (*curmtd)->mtdinfo->type = MTD_RAM; | 211 | (*curmtd)->mtdinfo->type = MTD_RAM; |
199 | (*curmtd)->mtdinfo->erasesize = 0x0; | 212 | (*curmtd)->mtdinfo->erasesize = SLRAM_BLK_SZ; |
200 | 213 | ||
201 | if (add_mtd_device((*curmtd)->mtdinfo)) { | 214 | if (add_mtd_device((*curmtd)->mtdinfo)) { |
202 | E("slram: Failed to register new device\n"); | 215 | E("slram: Failed to register new device\n"); |
@@ -261,7 +274,7 @@ static int parse_cmdline(char *devname, char *szstart, char *szlength) | |||
261 | } | 274 | } |
262 | T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n", | 275 | T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n", |
263 | devname, devstart, devlength); | 276 | devname, devstart, devlength); |
264 | if ((devstart < 0) || (devlength < 0)) { | 277 | if ((devstart < 0) || (devlength < 0) || (devlength % SLRAM_BLK_SZ != 0)) { |
265 | E("slram: Illegal start / length parameter.\n"); | 278 | E("slram: Illegal start / length parameter.\n"); |
266 | return(-EINVAL); | 279 | return(-EINVAL); |
267 | } | 280 | } |
diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c index 18cc8846e733..d9ab60b36fd4 100644 --- a/drivers/mtd/ftl.c +++ b/drivers/mtd/ftl.c | |||
@@ -1,5 +1,5 @@ | |||
1 | /* This version ported to the Linux-MTD system by dwmw2@infradead.org | 1 | /* This version ported to the Linux-MTD system by dwmw2@infradead.org |
2 | * $Id: ftl.c,v 1.54 2004/11/16 18:33:15 dwmw2 Exp $ | 2 | * $Id: ftl.c,v 1.55 2005/01/17 13:47:21 hvr Exp $ |
3 | * | 3 | * |
4 | * Fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br> | 4 | * Fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br> |
5 | * - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups | 5 | * - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups |
@@ -357,6 +357,7 @@ static int erase_xfer(partition_t *part, | |||
357 | if (!erase) | 357 | if (!erase) |
358 | return -ENOMEM; | 358 | return -ENOMEM; |
359 | 359 | ||
360 | erase->mtd = part->mbd.mtd; | ||
360 | erase->callback = ftl_erase_callback; | 361 | erase->callback = ftl_erase_callback; |
361 | erase->addr = xfer->Offset; | 362 | erase->addr = xfer->Offset; |
362 | erase->len = 1 << part->header.EraseUnitSize; | 363 | erase->len = 1 << part->header.EraseUnitSize; |
@@ -1096,7 +1097,7 @@ struct mtd_blktrans_ops ftl_tr = { | |||
1096 | 1097 | ||
1097 | int init_ftl(void) | 1098 | int init_ftl(void) |
1098 | { | 1099 | { |
1099 | DEBUG(0, "$Id: ftl.c,v 1.54 2004/11/16 18:33:15 dwmw2 Exp $\n"); | 1100 | DEBUG(0, "$Id: ftl.c,v 1.55 2005/01/17 13:47:21 hvr Exp $\n"); |
1100 | 1101 | ||
1101 | return register_mtd_blktrans(&ftl_tr); | 1102 | return register_mtd_blktrans(&ftl_tr); |
1102 | } | 1103 | } |
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 2bea2e0b06f2..44781a83b2e7 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig | |||
@@ -1,5 +1,5 @@ | |||
1 | # drivers/mtd/maps/Kconfig | 1 | # drivers/mtd/maps/Kconfig |
2 | # $Id: Kconfig,v 1.42 2005/01/05 16:59:50 dwmw2 Exp $ | 2 | # $Id: Kconfig,v 1.55 2005/07/02 01:53:24 tpoynor Exp $ |
3 | 3 | ||
4 | menu "Mapping drivers for chip access" | 4 | menu "Mapping drivers for chip access" |
5 | depends on MTD!=n | 5 | depends on MTD!=n |
@@ -122,16 +122,6 @@ config MTD_SBC_GXX | |||
122 | More info at | 122 | More info at |
123 | <http://www.arcomcontrols.com/products/icp/pc104/processors/SBC_GX1.htm>. | 123 | <http://www.arcomcontrols.com/products/icp/pc104/processors/SBC_GX1.htm>. |
124 | 124 | ||
125 | config MTD_ELAN_104NC | ||
126 | tristate "CFI Flash device mapped on Arcom ELAN-104NC" | ||
127 | depends on X86 && MTD_CFI_INTELEXT && MTD_PARTITIONS && MTD_COMPLEX_MAPPINGS | ||
128 | help | ||
129 | This provides a driver for the on-board flash of the Arcom Control | ||
130 | System's ELAN-104NC development board. By default the flash | ||
131 | is split into 3 partitions which are accessed as separate MTD | ||
132 | devices. This board utilizes Intel StrataFlash. More info at | ||
133 | <http://www.arcomcontrols.com/products/icp/pc104/processors/ELAN104NC.htm>. | ||
134 | |||
135 | config MTD_LUBBOCK | 125 | config MTD_LUBBOCK |
136 | tristate "CFI Flash device mapped on Intel Lubbock XScale eval board" | 126 | tristate "CFI Flash device mapped on Intel Lubbock XScale eval board" |
137 | depends on ARCH_LUBBOCK && MTD_CFI_INTELEXT && MTD_PARTITIONS | 127 | depends on ARCH_LUBBOCK && MTD_CFI_INTELEXT && MTD_PARTITIONS |
@@ -139,6 +129,14 @@ config MTD_LUBBOCK | |||
139 | This provides a driver for the on-board flash of the Intel | 129 | This provides a driver for the on-board flash of the Intel |
140 | 'Lubbock' XScale evaluation board. | 130 | 'Lubbock' XScale evaluation board. |
141 | 131 | ||
132 | config MTD_MAINSTONE | ||
133 | tristate "CFI Flash device mapped on Intel Mainstone XScale eval board" | ||
134 | depends on MACH_MAINSTONE && MTD_CFI_INTELEXT | ||
135 | select MTD_PARTITIONS | ||
136 | help | ||
137 | This provides a driver for the on-board flash of the Intel | ||
138 | 'Mainstone PXA27x evaluation board. | ||
139 | |||
142 | config MTD_OCTAGON | 140 | config MTD_OCTAGON |
143 | tristate "JEDEC Flash device mapped on Octagon 5066 SBC" | 141 | tristate "JEDEC Flash device mapped on Octagon 5066 SBC" |
144 | depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS | 142 | depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS |
@@ -213,74 +211,11 @@ config MTD_NETtel | |||
213 | help | 211 | help |
214 | Support for flash chips on NETtel/SecureEdge/SnapGear boards. | 212 | Support for flash chips on NETtel/SecureEdge/SnapGear boards. |
215 | 213 | ||
216 | config MTD_PB1XXX | 214 | config MTD_ALCHEMY |
217 | tristate "Flash devices on Alchemy PB1xxx boards" | 215 | tristate ' AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support' |
218 | depends on MIPS && ( MIPS_PB1000 || MIPS_PB1100 || MIPS_PB1500 ) | 216 | depends on MIPS && SOC_AU1X00 |
219 | help | ||
220 | Flash memory access on Alchemy Pb1000/Pb1100/Pb1500 boards | ||
221 | |||
222 | config MTD_PB1XXX_BOOT | ||
223 | bool "PB1x00 boot flash device" | ||
224 | depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 ) | ||
225 | help | ||
226 | Use the first of the two 32MiB flash banks on Pb1100/Pb1500 board. | ||
227 | You can say 'Y' to both this and 'MTD_PB1XXX_USER' below, to use | ||
228 | both banks. | ||
229 | |||
230 | config MTD_PB1XXX_USER | ||
231 | bool "PB1x00 user flash device" | ||
232 | depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 ) | ||
233 | default y if MTD_PB1XX_BOOT = n | ||
234 | help | ||
235 | Use the second of the two 32MiB flash banks on Pb1100/Pb1500 board. | ||
236 | You can say 'Y' to both this and 'MTD_PB1XXX_BOOT' above, to use | ||
237 | both banks. | ||
238 | |||
239 | config MTD_PB1550 | ||
240 | tristate "Flash devices on Alchemy PB1550 board" | ||
241 | depends on MIPS && MIPS_PB1550 | ||
242 | help | ||
243 | Flash memory access on Alchemy Pb1550 board | ||
244 | |||
245 | config MTD_PB1550_BOOT | ||
246 | bool "PB1550 boot flash device" | ||
247 | depends on MTD_PB1550 | ||
248 | help | 217 | help |
249 | Use the first of the two 64MiB flash banks on Pb1550 board. | 218 | Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards |
250 | You can say 'Y' to both this and 'MTD_PB1550_USER' below, to use | ||
251 | both banks. | ||
252 | |||
253 | config MTD_PB1550_USER | ||
254 | bool "PB1550 user flash device" | ||
255 | depends on MTD_PB1550 | ||
256 | default y if MTD_PB1550_BOOT = n | ||
257 | help | ||
258 | Use the second of the two 64MiB flash banks on Pb1550 board. | ||
259 | You can say 'Y' to both this and 'MTD_PB1550_BOOT' above, to use | ||
260 | both banks. | ||
261 | |||
262 | config MTD_DB1550 | ||
263 | tristate "Flash devices on Alchemy DB1550 board" | ||
264 | depends on MIPS && MIPS_DB1550 | ||
265 | help | ||
266 | Flash memory access on Alchemy Db1550 board | ||
267 | |||
268 | config MTD_DB1550_BOOT | ||
269 | bool "DB1550 boot flash device" | ||
270 | depends on MTD_DB1550 | ||
271 | help | ||
272 | Use the first of the two 64MiB flash banks on Db1550 board. | ||
273 | You can say 'Y' to both this and 'MTD_DB1550_USER' below, to use | ||
274 | both banks. | ||
275 | |||
276 | config MTD_DB1550_USER | ||
277 | bool "DB1550 user flash device" | ||
278 | depends on MTD_DB1550 | ||
279 | default y if MTD_DB1550_BOOT = n | ||
280 | help | ||
281 | Use the second of the two 64MiB flash banks on Db1550 board. | ||
282 | You can say 'Y' to both this and 'MTD_DB1550_BOOT' above, to use | ||
283 | both banks. | ||
284 | 219 | ||
285 | config MTD_DILNETPC | 220 | config MTD_DILNETPC |
286 | tristate "CFI Flash device mapped on DIL/Net PC" | 221 | tristate "CFI Flash device mapped on DIL/Net PC" |
@@ -588,6 +523,15 @@ config MTD_MPC1211 | |||
588 | This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02). | 523 | This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02). |
589 | If you have such a board, say 'Y'. | 524 | If you have such a board, say 'Y'. |
590 | 525 | ||
526 | config MTD_OMAP_NOR | ||
527 | tristate "TI OMAP board mappings" | ||
528 | depends on MTD_CFI && ARCH_OMAP | ||
529 | help | ||
530 | This enables access to the NOR flash chips on TI OMAP-based | ||
531 | boards defining flash platform devices and flash platform data. | ||
532 | These boards include the Innovator, H2, H3, OSK, Perseus2, and | ||
533 | more. If you have such a board, say 'Y'. | ||
534 | |||
591 | # This needs CFI or JEDEC, depending on the cards found. | 535 | # This needs CFI or JEDEC, depending on the cards found. |
592 | config MTD_PCI | 536 | config MTD_PCI |
593 | tristate "PCI MTD driver" | 537 | tristate "PCI MTD driver" |
@@ -647,13 +591,14 @@ config MTD_DMV182 | |||
647 | Map driver for Dy-4 SVME/DMV-182 board. | 591 | Map driver for Dy-4 SVME/DMV-182 board. |
648 | 592 | ||
649 | config MTD_BAST | 593 | config MTD_BAST |
650 | tristate "Map driver for Simtec BAST (EB2410ITX)" | 594 | tristate "Map driver for Simtec BAST (EB2410ITX) or Thorcom VR1000" |
651 | depends on ARCH_BAST | 595 | depends on ARCH_BAST || MACH_VR1000 |
652 | select MTD_PARTITIONS | 596 | select MTD_PARTITIONS |
653 | select MTD_MAP_BANK_WIDTH_16 | 597 | select MTD_MAP_BANK_WIDTH_16 |
654 | select MTD_JEDECPROBE | 598 | select MTD_JEDECPROBE |
655 | help | 599 | help |
656 | Map driver for NOR flash on the Simtec BAST (EB2410ITX). | 600 | Map driver for NOR flash on the Simtec BAST (EB2410ITX), or the |
601 | Thorcom VR1000 | ||
657 | 602 | ||
658 | Note, this driver *cannot* over-ride the WP link on the | 603 | Note, this driver *cannot* over-ride the WP link on the |
659 | board, or currently detect the state of the link. | 604 | board, or currently detect the state of the link. |
@@ -669,5 +614,15 @@ config MTD_SHARP_SL | |||
669 | help | 614 | help |
670 | This enables access to the flash chip on the Sharp SL Series of PDAs. | 615 | This enables access to the flash chip on the Sharp SL Series of PDAs. |
671 | 616 | ||
617 | config MTD_PLATRAM | ||
618 | tristate "Map driver for platform device RAM (mtd-ram)" | ||
619 | depends on MTD | ||
620 | select MTD_RAM | ||
621 | help | ||
622 | Map driver for RAM areas described via the platform device | ||
623 | system. | ||
624 | |||
625 | This selection automatically selects the map_ram driver. | ||
626 | |||
672 | endmenu | 627 | endmenu |
673 | 628 | ||
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 7ffe02b85301..7bcbc49e329f 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile | |||
@@ -1,7 +1,7 @@ | |||
1 | # | 1 | # |
2 | # linux/drivers/maps/Makefile | 2 | # linux/drivers/maps/Makefile |
3 | # | 3 | # |
4 | # $Id: Makefile.common,v 1.23 2005/01/05 17:06:36 dwmw2 Exp $ | 4 | # $Id: Makefile.common,v 1.30 2005/07/02 01:53:24 tpoynor Exp $ |
5 | 5 | ||
6 | ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y) | 6 | ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y) |
7 | obj-$(CONFIG_MTD) += map_funcs.o | 7 | obj-$(CONFIG_MTD) += map_funcs.o |
@@ -15,7 +15,6 @@ obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o | |||
15 | obj-$(CONFIG_MTD_CSTM_MIPS_IXX) += cstm_mips_ixx.o | 15 | obj-$(CONFIG_MTD_CSTM_MIPS_IXX) += cstm_mips_ixx.o |
16 | obj-$(CONFIG_MTD_DC21285) += dc21285.o | 16 | obj-$(CONFIG_MTD_DC21285) += dc21285.o |
17 | obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o | 17 | obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o |
18 | obj-$(CONFIG_MTD_ELAN_104NC) += elan-104nc.o | ||
19 | obj-$(CONFIG_MTD_EPXA10DB) += epxa10db-flash.o | 18 | obj-$(CONFIG_MTD_EPXA10DB) += epxa10db-flash.o |
20 | obj-$(CONFIG_MTD_IQ80310) += iq80310.o | 19 | obj-$(CONFIG_MTD_IQ80310) += iq80310.o |
21 | obj-$(CONFIG_MTD_L440GX) += l440gx.o | 20 | obj-$(CONFIG_MTD_L440GX) += l440gx.o |
@@ -23,6 +22,7 @@ obj-$(CONFIG_MTD_AMD76XROM) += amd76xrom.o | |||
23 | obj-$(CONFIG_MTD_ICHXROM) += ichxrom.o | 22 | obj-$(CONFIG_MTD_ICHXROM) += ichxrom.o |
24 | obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o | 23 | obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o |
25 | obj-$(CONFIG_MTD_LUBBOCK) += lubbock-flash.o | 24 | obj-$(CONFIG_MTD_LUBBOCK) += lubbock-flash.o |
25 | obj-$(CONFIG_MTD_MAINSTONE) += mainstone-flash.o | ||
26 | obj-$(CONFIG_MTD_MBX860) += mbx860.o | 26 | obj-$(CONFIG_MTD_MBX860) += mbx860.o |
27 | obj-$(CONFIG_MTD_CEIVA) += ceiva.o | 27 | obj-$(CONFIG_MTD_CEIVA) += ceiva.o |
28 | obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o | 28 | obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o |
@@ -44,10 +44,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o | |||
44 | obj-$(CONFIG_MTD_OCELOT) += ocelot.o | 44 | obj-$(CONFIG_MTD_OCELOT) += ocelot.o |
45 | obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o | 45 | obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o |
46 | obj-$(CONFIG_MTD_PCI) += pci.o | 46 | obj-$(CONFIG_MTD_PCI) += pci.o |
47 | obj-$(CONFIG_MTD_PB1XXX) += pb1xxx-flash.o | 47 | obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o |
48 | obj-$(CONFIG_MTD_DB1X00) += db1x00-flash.o | ||
49 | obj-$(CONFIG_MTD_PB1550) += pb1550-flash.o | ||
50 | obj-$(CONFIG_MTD_DB1550) += db1550-flash.o | ||
51 | obj-$(CONFIG_MTD_LASAT) += lasat.o | 48 | obj-$(CONFIG_MTD_LASAT) += lasat.o |
52 | obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o | 49 | obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o |
53 | obj-$(CONFIG_MTD_EDB7312) += edb7312.o | 50 | obj-$(CONFIG_MTD_EDB7312) += edb7312.o |
@@ -71,3 +68,5 @@ obj-$(CONFIG_MTD_IXP2000) += ixp2000.o | |||
71 | obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o | 68 | obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o |
72 | obj-$(CONFIG_MTD_DMV182) += dmv182.o | 69 | obj-$(CONFIG_MTD_DMV182) += dmv182.o |
73 | obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o | 70 | obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o |
71 | obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o | ||
72 | obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o | ||
diff --git a/drivers/mtd/maps/alchemy-flash.c b/drivers/mtd/maps/alchemy-flash.c new file mode 100644 index 000000000000..27fd2a3c3b60 --- /dev/null +++ b/drivers/mtd/maps/alchemy-flash.c | |||
@@ -0,0 +1,192 @@ | |||
1 | /* | ||
2 | * Flash memory access on AMD Alchemy evaluation boards | ||
3 | * | ||
4 | * $Id: alchemy-flash.c,v 1.1 2005/02/27 21:50:21 ppopov Exp $ | ||
5 | * | ||
6 | * (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com> | ||
7 | * | ||
8 | */ | ||
9 | |||
10 | #include <linux/config.h> | ||
11 | #include <linux/init.h> | ||
12 | #include <linux/module.h> | ||
13 | #include <linux/types.h> | ||
14 | #include <linux/kernel.h> | ||
15 | |||
16 | #include <linux/mtd/mtd.h> | ||
17 | #include <linux/mtd/map.h> | ||
18 | #include <linux/mtd/partitions.h> | ||
19 | |||
20 | #include <asm/io.h> | ||
21 | |||
22 | #ifdef DEBUG_RW | ||
23 | #define DBG(x...) printk(x) | ||
24 | #else | ||
25 | #define DBG(x...) | ||
26 | #endif | ||
27 | |||
28 | #ifdef CONFIG_MIPS_PB1000 | ||
29 | #define BOARD_MAP_NAME "Pb1000 Flash" | ||
30 | #define BOARD_FLASH_SIZE 0x00800000 /* 8MB */ | ||
31 | #define BOARD_FLASH_WIDTH 4 /* 32-bits */ | ||
32 | #endif | ||
33 | |||
34 | #ifdef CONFIG_MIPS_PB1500 | ||
35 | #define BOARD_MAP_NAME "Pb1500 Flash" | ||
36 | #define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ | ||
37 | #define BOARD_FLASH_WIDTH 4 /* 32-bits */ | ||
38 | #endif | ||
39 | |||
40 | #ifdef CONFIG_MIPS_PB1100 | ||
41 | #define BOARD_MAP_NAME "Pb1100 Flash" | ||
42 | #define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ | ||
43 | #define BOARD_FLASH_WIDTH 4 /* 32-bits */ | ||
44 | #endif | ||
45 | |||
46 | #ifdef CONFIG_MIPS_PB1550 | ||
47 | #define BOARD_MAP_NAME "Pb1550 Flash" | ||
48 | #define BOARD_FLASH_SIZE 0x08000000 /* 128MB */ | ||
49 | #define BOARD_FLASH_WIDTH 4 /* 32-bits */ | ||
50 | #endif | ||
51 | |||
52 | #ifdef CONFIG_MIPS_PB1200 | ||
53 | #define BOARD_MAP_NAME "Pb1200 Flash" | ||
54 | #define BOARD_FLASH_SIZE 0x08000000 /* 128MB */ | ||
55 | #define BOARD_FLASH_WIDTH 2 /* 16-bits */ | ||
56 | #endif | ||
57 | |||
58 | #ifdef CONFIG_MIPS_DB1000 | ||
59 | #define BOARD_MAP_NAME "Db1000 Flash" | ||
60 | #define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ | ||
61 | #define BOARD_FLASH_WIDTH 4 /* 32-bits */ | ||
62 | #endif | ||
63 | |||
64 | #ifdef CONFIG_MIPS_DB1500 | ||
65 | #define BOARD_MAP_NAME "Db1500 Flash" | ||
66 | #define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ | ||
67 | #define BOARD_FLASH_WIDTH 4 /* 32-bits */ | ||
68 | #endif | ||
69 | |||
70 | #ifdef CONFIG_MIPS_DB1100 | ||
71 | #define BOARD_MAP_NAME "Db1100 Flash" | ||
72 | #define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ | ||
73 | #define BOARD_FLASH_WIDTH 4 /* 32-bits */ | ||
74 | #endif | ||
75 | |||
76 | #ifdef CONFIG_MIPS_DB1550 | ||
77 | #define BOARD_MAP_NAME "Db1550 Flash" | ||
78 | #define BOARD_FLASH_SIZE 0x08000000 /* 128MB */ | ||
79 | #define BOARD_FLASH_WIDTH 4 /* 32-bits */ | ||
80 | #endif | ||
81 | |||
82 | #ifdef CONFIG_MIPS_DB1200 | ||
83 | #define BOARD_MAP_NAME "Db1200 Flash" | ||
84 | #define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ | ||
85 | #define BOARD_FLASH_WIDTH 2 /* 16-bits */ | ||
86 | #endif | ||
87 | |||
88 | #ifdef CONFIG_MIPS_HYDROGEN3 | ||
89 | #define BOARD_MAP_NAME "Hydrogen3 Flash" | ||
90 | #define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ | ||
91 | #define BOARD_FLASH_WIDTH 4 /* 32-bits */ | ||
92 | #define USE_LOCAL_ACCESSORS /* why? */ | ||
93 | #endif | ||
94 | |||
95 | #ifdef CONFIG_MIPS_BOSPORUS | ||
96 | #define BOARD_MAP_NAME "Bosporus Flash" | ||
97 | #define BOARD_FLASH_SIZE 0x01000000 /* 16MB */ | ||
98 | #define BOARD_FLASH_WIDTH 2 /* 16-bits */ | ||
99 | #endif | ||
100 | |||
101 | #ifdef CONFIG_MIPS_MIRAGE | ||
102 | #define BOARD_MAP_NAME "Mirage Flash" | ||
103 | #define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ | ||
104 | #define BOARD_FLASH_WIDTH 4 /* 32-bits */ | ||
105 | #define USE_LOCAL_ACCESSORS /* why? */ | ||
106 | #endif | ||
107 | |||
108 | static struct map_info alchemy_map = { | ||
109 | .name = BOARD_MAP_NAME, | ||
110 | }; | ||
111 | |||
112 | static struct mtd_partition alchemy_partitions[] = { | ||
113 | { | ||
114 | .name = "User FS", | ||
115 | .size = BOARD_FLASH_SIZE - 0x00400000, | ||
116 | .offset = 0x0000000 | ||
117 | },{ | ||
118 | .name = "YAMON", | ||
119 | .size = 0x0100000, | ||
120 | .offset = MTDPART_OFS_APPEND, | ||
121 | .mask_flags = MTD_WRITEABLE | ||
122 | },{ | ||
123 | .name = "raw kernel", | ||
124 | .size = (0x300000 - 0x40000), /* last 256KB is yamon env */ | ||
125 | .offset = MTDPART_OFS_APPEND, | ||
126 | } | ||
127 | }; | ||
128 | |||
129 | #define NB_OF(x) (sizeof(x)/sizeof(x[0])) | ||
130 | |||
131 | static struct mtd_info *mymtd; | ||
132 | |||
133 | int __init alchemy_mtd_init(void) | ||
134 | { | ||
135 | struct mtd_partition *parts; | ||
136 | int nb_parts = 0; | ||
137 | unsigned long window_addr; | ||
138 | unsigned long window_size; | ||
139 | |||
140 | /* Default flash buswidth */ | ||
141 | alchemy_map.bankwidth = BOARD_FLASH_WIDTH; | ||
142 | |||
143 | window_addr = 0x20000000 - BOARD_FLASH_SIZE; | ||
144 | window_size = BOARD_FLASH_SIZE; | ||
145 | #ifdef CONFIG_MIPS_MIRAGE_WHY | ||
146 | /* Boot ROM flash bank only; no user bank */ | ||
147 | window_addr = 0x1C000000; | ||
148 | window_size = 0x04000000; | ||
149 | /* USERFS from 0x1C00 0000 to 0x1FC00000 */ | ||
150 | alchemy_partitions[0].size = 0x03C00000; | ||
151 | #endif | ||
152 | |||
153 | /* | ||
154 | * Static partition definition selection | ||
155 | */ | ||
156 | parts = alchemy_partitions; | ||
157 | nb_parts = NB_OF(alchemy_partitions); | ||
158 | alchemy_map.size = window_size; | ||
159 | |||
160 | /* | ||
161 | * Now let's probe for the actual flash. Do it here since | ||
162 | * specific machine settings might have been set above. | ||
163 | */ | ||
164 | printk(KERN_NOTICE BOARD_MAP_NAME ": probing %d-bit flash bus\n", | ||
165 | alchemy_map.bankwidth*8); | ||
166 | alchemy_map.virt = ioremap(window_addr, window_size); | ||
167 | mymtd = do_map_probe("cfi_probe", &alchemy_map); | ||
168 | if (!mymtd) { | ||
169 | iounmap(alchemy_map.virt); | ||
170 | return -ENXIO; | ||
171 | } | ||
172 | mymtd->owner = THIS_MODULE; | ||
173 | |||
174 | add_mtd_partitions(mymtd, parts, nb_parts); | ||
175 | return 0; | ||
176 | } | ||
177 | |||
178 | static void __exit alchemy_mtd_cleanup(void) | ||
179 | { | ||
180 | if (mymtd) { | ||
181 | del_mtd_partitions(mymtd); | ||
182 | map_destroy(mymtd); | ||
183 | iounmap(alchemy_map.virt); | ||
184 | } | ||
185 | } | ||
186 | |||
187 | module_init(alchemy_mtd_init); | ||
188 | module_exit(alchemy_mtd_cleanup); | ||
189 | |||
190 | MODULE_AUTHOR("Embedded Alley Solutions, Inc"); | ||
191 | MODULE_DESCRIPTION(BOARD_MAP_NAME " MTD driver"); | ||
192 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c index 51e97b05304e..e8a900a77685 100644 --- a/drivers/mtd/maps/amd76xrom.c +++ b/drivers/mtd/maps/amd76xrom.c | |||
@@ -2,7 +2,7 @@ | |||
2 | * amd76xrom.c | 2 | * amd76xrom.c |
3 | * | 3 | * |
4 | * Normal mappings of chips in physical memory | 4 | * Normal mappings of chips in physical memory |
5 | * $Id: amd76xrom.c,v 1.19 2004/11/28 09:40:39 dwmw2 Exp $ | 5 | * $Id: amd76xrom.c,v 1.20 2005/03/18 14:04:35 gleixner Exp $ |
6 | */ | 6 | */ |
7 | 7 | ||
8 | #include <linux/module.h> | 8 | #include <linux/module.h> |
@@ -314,7 +314,7 @@ static int __init init_amd76xrom(void) | |||
314 | } | 314 | } |
315 | return -ENXIO; | 315 | return -ENXIO; |
316 | #if 0 | 316 | #if 0 |
317 | return pci_module_init(&amd76xrom_driver); | 317 | return pci_register_driver(&amd76xrom_driver); |
318 | #endif | 318 | #endif |
319 | } | 319 | } |
320 | 320 | ||
diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c index 44de3a81b277..0c45464e3f7b 100644 --- a/drivers/mtd/maps/bast-flash.c +++ b/drivers/mtd/maps/bast-flash.c | |||
@@ -1,14 +1,15 @@ | |||
1 | /* linux/drivers/mtd/maps/bast_flash.c | 1 | /* linux/drivers/mtd/maps/bast_flash.c |
2 | * | 2 | * |
3 | * Copyright (c) 2004 Simtec Electronics | 3 | * Copyright (c) 2004-2005 Simtec Electronics |
4 | * Ben Dooks <ben@simtec.co.uk> | 4 | * Ben Dooks <ben@simtec.co.uk> |
5 | * | 5 | * |
6 | * Simtec Bast (EB2410ITX) NOR MTD Mapping driver | 6 | * Simtec Bast (EB2410ITX) NOR MTD Mapping driver |
7 | * | 7 | * |
8 | * Changelog: | 8 | * Changelog: |
9 | * 20-Sep-2004 BJD Initial version | 9 | * 20-Sep-2004 BJD Initial version |
10 | * 17-Jan-2005 BJD Add whole device if no partitions found | ||
10 | * | 11 | * |
11 | * $Id: bast-flash.c,v 1.1 2004/09/21 14:29:04 bjd Exp $ | 12 | * $Id: bast-flash.c,v 1.2 2005/01/18 11:13:47 bjd Exp $ |
12 | * | 13 | * |
13 | * This program is free software; you can redistribute it and/or modify | 14 | * This program is free software; you can redistribute it and/or modify |
14 | * it under the terms of the GNU General Public License as published by | 15 | * it under the terms of the GNU General Public License as published by |
@@ -46,9 +47,9 @@ | |||
46 | #include <asm/arch/bast-cpld.h> | 47 | #include <asm/arch/bast-cpld.h> |
47 | 48 | ||
48 | #ifdef CONFIG_MTD_BAST_MAXSIZE | 49 | #ifdef CONFIG_MTD_BAST_MAXSIZE |
49 | #define AREA_MAXSIZE (CONFIG_MTD_BAST_MAXSIZE * (1024*1024)) | 50 | #define AREA_MAXSIZE (CONFIG_MTD_BAST_MAXSIZE * SZ_1M) |
50 | #else | 51 | #else |
51 | #define AREA_MAXSIZE (32*1024*1024) | 52 | #define AREA_MAXSIZE (32 * SZ_1M) |
52 | #endif | 53 | #endif |
53 | 54 | ||
54 | #define PFX "bast-flash: " | 55 | #define PFX "bast-flash: " |
@@ -189,6 +190,8 @@ static int bast_flash_probe(struct device *dev) | |||
189 | err = add_mtd_partitions(info->mtd, info->partitions, err); | 190 | err = add_mtd_partitions(info->mtd, info->partitions, err); |
190 | if (err) | 191 | if (err) |
191 | printk(KERN_ERR PFX "cannot add/parse partitions\n"); | 192 | printk(KERN_ERR PFX "cannot add/parse partitions\n"); |
193 | } else { | ||
194 | err = add_mtd_device(info->mtd); | ||
192 | } | 195 | } |
193 | 196 | ||
194 | if (err == 0) | 197 | if (err == 0) |
diff --git a/drivers/mtd/maps/db1550-flash.c b/drivers/mtd/maps/db1550-flash.c deleted file mode 100644 index d213888462a4..000000000000 --- a/drivers/mtd/maps/db1550-flash.c +++ /dev/null | |||
@@ -1,187 +0,0 @@ | |||
1 | /* | ||
2 | * Flash memory access on Alchemy Db1550 board | ||
3 | * | ||
4 | * $Id: db1550-flash.c,v 1.7 2004/11/04 13:24:14 gleixner Exp $ | ||
5 | * | ||
6 | * (C) 2004 Embedded Edge, LLC, based on db1550-flash.c: | ||
7 | * (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com> | ||
8 | * | ||
9 | */ | ||
10 | |||
11 | #include <linux/config.h> | ||
12 | #include <linux/init.h> | ||
13 | #include <linux/module.h> | ||
14 | #include <linux/types.h> | ||
15 | #include <linux/kernel.h> | ||
16 | |||
17 | #include <linux/mtd/mtd.h> | ||
18 | #include <linux/mtd/map.h> | ||
19 | #include <linux/mtd/partitions.h> | ||
20 | |||
21 | #include <asm/io.h> | ||
22 | |||
23 | #ifdef DEBUG_RW | ||
24 | #define DBG(x...) printk(x) | ||
25 | #else | ||
26 | #define DBG(x...) | ||
27 | #endif | ||
28 | |||
29 | static unsigned long window_addr; | ||
30 | static unsigned long window_size; | ||
31 | |||
32 | |||
33 | static struct map_info db1550_map = { | ||
34 | .name = "Db1550 flash", | ||
35 | }; | ||
36 | |||
37 | static unsigned char flash_bankwidth = 4; | ||
38 | |||
39 | /* | ||
40 | * Support only 64MB NOR Flash parts | ||
41 | */ | ||
42 | |||
43 | #if defined(CONFIG_MTD_DB1550_BOOT) && defined(CONFIG_MTD_DB1550_USER) | ||
44 | #define DB1550_BOTH_BANKS | ||
45 | #elif defined(CONFIG_MTD_DB1550_BOOT) && !defined(CONFIG_MTD_DB1550_USER) | ||
46 | #define DB1550_BOOT_ONLY | ||
47 | #elif !defined(CONFIG_MTD_DB1550_BOOT) && defined(CONFIG_MTD_DB1550_USER) | ||
48 | #define DB1550_USER_ONLY | ||
49 | #endif | ||
50 | |||
51 | #ifdef DB1550_BOTH_BANKS | ||
52 | /* both banks will be used. Combine the first bank and the first | ||
53 | * part of the second bank together into a single jffs/jffs2 | ||
54 | * partition. | ||
55 | */ | ||
56 | static struct mtd_partition db1550_partitions[] = { | ||
57 | /* assume boot[2:0]:swap is '0000' or '1000', which translates to: | ||
58 | * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash | ||
59 | * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash | ||
60 | */ | ||
61 | { | ||
62 | .name = "User FS", | ||
63 | .size = (0x1FC00000 - 0x18000000), | ||
64 | .offset = 0x0000000 | ||
65 | },{ | ||
66 | .name = "yamon", | ||
67 | .size = 0x0100000, | ||
68 | .offset = MTDPART_OFS_APPEND, | ||
69 | .mask_flags = MTD_WRITEABLE | ||
70 | },{ | ||
71 | .name = "raw kernel", | ||
72 | .size = (0x300000 - 0x40000), /* last 256KB is yamon env */ | ||
73 | .offset = MTDPART_OFS_APPEND, | ||
74 | } | ||
75 | }; | ||
76 | #elif defined(DB1550_BOOT_ONLY) | ||
77 | static struct mtd_partition db1550_partitions[] = { | ||
78 | /* assume boot[2:0]:swap is '0000' or '1000', which translates to: | ||
79 | * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash | ||
80 | */ | ||
81 | { | ||
82 | .name = "User FS", | ||
83 | .size = 0x03c00000, | ||
84 | .offset = 0x0000000 | ||
85 | },{ | ||
86 | .name = "yamon", | ||
87 | .size = 0x0100000, | ||
88 | .offset = MTDPART_OFS_APPEND, | ||
89 | .mask_flags = MTD_WRITEABLE | ||
90 | },{ | ||
91 | .name = "raw kernel", | ||
92 | .size = (0x300000-0x40000), /* last 256KB is yamon env */ | ||
93 | .offset = MTDPART_OFS_APPEND, | ||
94 | } | ||
95 | }; | ||
96 | #elif defined(DB1550_USER_ONLY) | ||
97 | static struct mtd_partition db1550_partitions[] = { | ||
98 | /* assume boot[2:0]:swap is '0000' or '1000', which translates to: | ||
99 | * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash | ||
100 | */ | ||
101 | { | ||
102 | .name = "User FS", | ||
103 | .size = (0x4000000 - 0x200000), /* reserve 2MB for raw kernel */ | ||
104 | .offset = 0x0000000 | ||
105 | },{ | ||
106 | .name = "raw kernel", | ||
107 | .size = MTDPART_SIZ_FULL, | ||
108 | .offset = MTDPART_OFS_APPEND, | ||
109 | } | ||
110 | }; | ||
111 | #else | ||
112 | #error MTD_DB1550 define combo error /* should never happen */ | ||
113 | #endif | ||
114 | |||
115 | #define NB_OF(x) (sizeof(x)/sizeof(x[0])) | ||
116 | |||
117 | static struct mtd_info *mymtd; | ||
118 | |||
119 | /* | ||
120 | * Probe the flash density and setup window address and size | ||
121 | * based on user CONFIG options. There are times when we don't | ||
122 | * want the MTD driver to be probing the boot or user flash, | ||
123 | * so having the option to enable only one bank is important. | ||
124 | */ | ||
125 | int setup_flash_params(void) | ||
126 | { | ||
127 | #if defined(DB1550_BOTH_BANKS) | ||
128 | window_addr = 0x18000000; | ||
129 | window_size = 0x8000000; | ||
130 | #elif defined(DB1550_BOOT_ONLY) | ||
131 | window_addr = 0x1C000000; | ||
132 | window_size = 0x4000000; | ||
133 | #else /* USER ONLY */ | ||
134 | window_addr = 0x18000000; | ||
135 | window_size = 0x4000000; | ||
136 | #endif | ||
137 | return 0; | ||
138 | } | ||
139 | |||
140 | int __init db1550_mtd_init(void) | ||
141 | { | ||
142 | struct mtd_partition *parts; | ||
143 | int nb_parts = 0; | ||
144 | |||
145 | /* Default flash bankwidth */ | ||
146 | db1550_map.bankwidth = flash_bankwidth; | ||
147 | |||
148 | if (setup_flash_params()) | ||
149 | return -ENXIO; | ||
150 | |||
151 | /* | ||
152 | * Static partition definition selection | ||
153 | */ | ||
154 | parts = db1550_partitions; | ||
155 | nb_parts = NB_OF(db1550_partitions); | ||
156 | db1550_map.size = window_size; | ||
157 | |||
158 | /* | ||
159 | * Now let's probe for the actual flash. Do it here since | ||
160 | * specific machine settings might have been set above. | ||
161 | */ | ||
162 | printk(KERN_NOTICE "Db1550 flash: probing %d-bit flash bus\n", | ||
163 | db1550_map.bankwidth*8); | ||
164 | db1550_map.virt = ioremap(window_addr, window_size); | ||
165 | mymtd = do_map_probe("cfi_probe", &db1550_map); | ||
166 | if (!mymtd) return -ENXIO; | ||
167 | mymtd->owner = THIS_MODULE; | ||
168 | |||
169 | add_mtd_partitions(mymtd, parts, nb_parts); | ||
170 | return 0; | ||
171 | } | ||
172 | |||
173 | static void __exit db1550_mtd_cleanup(void) | ||
174 | { | ||
175 | if (mymtd) { | ||
176 | del_mtd_partitions(mymtd); | ||
177 | map_destroy(mymtd); | ||
178 | iounmap((void *) db1550_map.virt); | ||
179 | } | ||
180 | } | ||
181 | |||
182 | module_init(db1550_mtd_init); | ||
183 | module_exit(db1550_mtd_cleanup); | ||
184 | |||
185 | MODULE_AUTHOR("Embedded Edge, LLC"); | ||
186 | MODULE_DESCRIPTION("Db1550 mtd map driver"); | ||
187 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/mtd/maps/db1x00-flash.c b/drivers/mtd/maps/db1x00-flash.c deleted file mode 100644 index faa68ec56902..000000000000 --- a/drivers/mtd/maps/db1x00-flash.c +++ /dev/null | |||
@@ -1,226 +0,0 @@ | |||
1 | /* | ||
2 | * Flash memory access on Alchemy Db1xxx boards | ||
3 | * | ||
4 | * $Id: db1x00-flash.c,v 1.6 2004/11/04 13:24:14 gleixner Exp $ | ||
5 | * | ||
6 | * (C) 2003 Pete Popov <ppopov@embeddedalley.com> | ||
7 | * | ||
8 | */ | ||
9 | |||
10 | #include <linux/config.h> | ||
11 | #include <linux/module.h> | ||
12 | #include <linux/types.h> | ||
13 | #include <linux/init.h> | ||
14 | #include <linux/kernel.h> | ||
15 | |||
16 | #include <linux/mtd/mtd.h> | ||
17 | #include <linux/mtd/map.h> | ||
18 | #include <linux/mtd/partitions.h> | ||
19 | |||
20 | #include <asm/io.h> | ||
21 | |||
22 | #ifdef DEBUG_RW | ||
23 | #define DBG(x...) printk(x) | ||
24 | #else | ||
25 | #define DBG(x...) | ||
26 | #endif | ||
27 | |||
28 | /* MTD CONFIG OPTIONS */ | ||
29 | #if defined(CONFIG_MTD_DB1X00_BOOT) && defined(CONFIG_MTD_DB1X00_USER) | ||
30 | #define DB1X00_BOTH_BANKS | ||
31 | #elif defined(CONFIG_MTD_DB1X00_BOOT) && !defined(CONFIG_MTD_DB1X00_USER) | ||
32 | #define DB1X00_BOOT_ONLY | ||
33 | #elif !defined(CONFIG_MTD_DB1X00_BOOT) && defined(CONFIG_MTD_DB1X00_USER) | ||
34 | #define DB1X00_USER_ONLY | ||
35 | #endif | ||
36 | |||
37 | static unsigned long window_addr; | ||
38 | static unsigned long window_size; | ||
39 | static unsigned long flash_size; | ||
40 | |||
41 | static unsigned short *bcsr = (unsigned short *)0xAE000000; | ||
42 | static unsigned char flash_bankwidth = 4; | ||
43 | |||
44 | /* | ||
45 | * The Db1x boards support different flash densities. We setup | ||
46 | * the mtd_partition structures below for default of 64Mbit | ||
47 | * flash densities, and override the partitions sizes, if | ||
48 | * necessary, after we check the board status register. | ||
49 | */ | ||
50 | |||
51 | #ifdef DB1X00_BOTH_BANKS | ||
52 | /* both banks will be used. Combine the first bank and the first | ||
53 | * part of the second bank together into a single jffs/jffs2 | ||
54 | * partition. | ||
55 | */ | ||
56 | static struct mtd_partition db1x00_partitions[] = { | ||
57 | { | ||
58 | .name = "User FS", | ||
59 | .size = 0x1c00000, | ||
60 | .offset = 0x0000000 | ||
61 | },{ | ||
62 | .name = "yamon", | ||
63 | .size = 0x0100000, | ||
64 | .offset = MTDPART_OFS_APPEND, | ||
65 | .mask_flags = MTD_WRITEABLE | ||
66 | },{ | ||
67 | .name = "raw kernel", | ||
68 | .size = (0x300000-0x40000), /* last 256KB is env */ | ||
69 | .offset = MTDPART_OFS_APPEND, | ||
70 | } | ||
71 | }; | ||
72 | #elif defined(DB1X00_BOOT_ONLY) | ||
73 | static struct mtd_partition db1x00_partitions[] = { | ||
74 | { | ||
75 | .name = "User FS", | ||
76 | .size = 0x00c00000, | ||
77 | .offset = 0x0000000 | ||
78 | },{ | ||
79 | .name = "yamon", | ||
80 | .size = 0x0100000, | ||
81 | .offset = MTDPART_OFS_APPEND, | ||
82 | .mask_flags = MTD_WRITEABLE | ||
83 | },{ | ||
84 | .name = "raw kernel", | ||
85 | .size = (0x300000-0x40000), /* last 256KB is env */ | ||
86 | .offset = MTDPART_OFS_APPEND, | ||
87 | } | ||
88 | }; | ||
89 | #elif defined(DB1X00_USER_ONLY) | ||
90 | static struct mtd_partition db1x00_partitions[] = { | ||
91 | { | ||
92 | .name = "User FS", | ||
93 | .size = 0x0e00000, | ||
94 | .offset = 0x0000000 | ||
95 | },{ | ||
96 | .name = "raw kernel", | ||
97 | .size = MTDPART_SIZ_FULL, | ||
98 | .offset = MTDPART_OFS_APPEND, | ||
99 | } | ||
100 | }; | ||
101 | #else | ||
102 | #error MTD_DB1X00 define combo error /* should never happen */ | ||
103 | #endif | ||
104 | #define NB_OF(x) (sizeof(x)/sizeof(x[0])) | ||
105 | |||
106 | #define NAME "Db1x00 Linux Flash" | ||
107 | |||
108 | static struct map_info db1xxx_mtd_map = { | ||
109 | .name = NAME, | ||
110 | }; | ||
111 | |||
112 | static struct mtd_partition *parsed_parts; | ||
113 | static struct mtd_info *db1xxx_mtd; | ||
114 | |||
115 | /* | ||
116 | * Probe the flash density and setup window address and size | ||
117 | * based on user CONFIG options. There are times when we don't | ||
118 | * want the MTD driver to be probing the boot or user flash, | ||
119 | * so having the option to enable only one bank is important. | ||
120 | */ | ||
121 | int setup_flash_params(void) | ||
122 | { | ||
123 | switch ((bcsr[2] >> 14) & 0x3) { | ||
124 | case 0: /* 64Mbit devices */ | ||
125 | flash_size = 0x800000; /* 8MB per part */ | ||
126 | #if defined(DB1X00_BOTH_BANKS) | ||
127 | window_addr = 0x1E000000; | ||
128 | window_size = 0x2000000; | ||
129 | #elif defined(DB1X00_BOOT_ONLY) | ||
130 | window_addr = 0x1F000000; | ||
131 | window_size = 0x1000000; | ||
132 | #else /* USER ONLY */ | ||
133 | window_addr = 0x1E000000; | ||
134 | window_size = 0x1000000; | ||
135 | #endif | ||
136 | break; | ||
137 | case 1: | ||
138 | /* 128 Mbit devices */ | ||
139 | flash_size = 0x1000000; /* 16MB per part */ | ||
140 | #if defined(DB1X00_BOTH_BANKS) | ||
141 | window_addr = 0x1C000000; | ||
142 | window_size = 0x4000000; | ||
143 | /* USERFS from 0x1C00 0000 to 0x1FC0 0000 */ | ||
144 | db1x00_partitions[0].size = 0x3C00000; | ||
145 | #elif defined(DB1X00_BOOT_ONLY) | ||
146 | window_addr = 0x1E000000; | ||
147 | window_size = 0x2000000; | ||
148 | /* USERFS from 0x1E00 0000 to 0x1FC0 0000 */ | ||
149 | db1x00_partitions[0].size = 0x1C00000; | ||
150 | #else /* USER ONLY */ | ||
151 | window_addr = 0x1C000000; | ||
152 | window_size = 0x2000000; | ||
153 | /* USERFS from 0x1C00 0000 to 0x1DE00000 */ | ||
154 | db1x00_partitions[0].size = 0x1DE0000; | ||
155 | #endif | ||
156 | break; | ||
157 | case 2: | ||
158 | /* 256 Mbit devices */ | ||
159 | flash_size = 0x4000000; /* 64MB per part */ | ||
160 | #if defined(DB1X00_BOTH_BANKS) | ||
161 | return 1; | ||
162 | #elif defined(DB1X00_BOOT_ONLY) | ||
163 | /* Boot ROM flash bank only; no user bank */ | ||
164 | window_addr = 0x1C000000; | ||
165 | window_size = 0x4000000; | ||
166 | /* USERFS from 0x1C00 0000 to 0x1FC00000 */ | ||
167 | db1x00_partitions[0].size = 0x3C00000; | ||
168 | #else /* USER ONLY */ | ||
169 | return 1; | ||
170 | #endif | ||
171 | break; | ||
172 | default: | ||
173 | return 1; | ||
174 | } | ||
175 | db1xxx_mtd_map.size = window_size; | ||
176 | db1xxx_mtd_map.bankwidth = flash_bankwidth; | ||
177 | db1xxx_mtd_map.phys = window_addr; | ||
178 | db1xxx_mtd_map.bankwidth = flash_bankwidth; | ||
179 | return 0; | ||
180 | } | ||
181 | |||
182 | int __init db1x00_mtd_init(void) | ||
183 | { | ||
184 | struct mtd_partition *parts; | ||
185 | int nb_parts = 0; | ||
186 | |||
187 | if (setup_flash_params()) | ||
188 | return -ENXIO; | ||
189 | |||
190 | /* | ||
191 | * Static partition definition selection | ||
192 | */ | ||
193 | parts = db1x00_partitions; | ||
194 | nb_parts = NB_OF(db1x00_partitions); | ||
195 | |||
196 | /* | ||
197 | * Now let's probe for the actual flash. Do it here since | ||
198 | * specific machine settings might have been set above. | ||
199 | */ | ||
200 | printk(KERN_NOTICE "Db1xxx flash: probing %d-bit flash bus\n", | ||
201 | db1xxx_mtd_map.bankwidth*8); | ||
202 | db1xxx_mtd_map.virt = ioremap(window_addr, window_size); | ||
203 | db1xxx_mtd = do_map_probe("cfi_probe", &db1xxx_mtd_map); | ||
204 | if (!db1xxx_mtd) return -ENXIO; | ||
205 | db1xxx_mtd->owner = THIS_MODULE; | ||
206 | |||
207 | add_mtd_partitions(db1xxx_mtd, parts, nb_parts); | ||
208 | return 0; | ||
209 | } | ||
210 | |||
211 | static void __exit db1x00_mtd_cleanup(void) | ||
212 | { | ||
213 | if (db1xxx_mtd) { | ||
214 | del_mtd_partitions(db1xxx_mtd); | ||
215 | map_destroy(db1xxx_mtd); | ||
216 | if (parsed_parts) | ||
217 | kfree(parsed_parts); | ||
218 | } | ||
219 | } | ||
220 | |||
221 | module_init(db1x00_mtd_init); | ||
222 | module_exit(db1x00_mtd_cleanup); | ||
223 | |||
224 | MODULE_AUTHOR("Pete Popov"); | ||
225 | MODULE_DESCRIPTION("Db1x00 mtd map driver"); | ||
226 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/mtd/maps/elan-104nc.c b/drivers/mtd/maps/elan-104nc.c deleted file mode 100644 index e9465f5c069e..000000000000 --- a/drivers/mtd/maps/elan-104nc.c +++ /dev/null | |||
@@ -1,228 +0,0 @@ | |||
1 | /* elan-104nc.c -- MTD map driver for Arcom Control Systems ELAN-104NC | ||
2 | |||
3 | Copyright (C) 2000 Arcom Control System Ltd | ||
4 | |||
5 | This program is free software; you can redistribute it and/or modify | ||
6 | it under the terms of the GNU General Public License as published by | ||
7 | the Free Software Foundation; either version 2 of the License, or | ||
8 | (at your option) any later version. | ||
9 | |||
10 | This program is distributed in the hope that it will be useful, | ||
11 | but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
12 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
13 | GNU General Public License for more details. | ||
14 | |||
15 | You should have received a copy of the GNU General Public License | ||
16 | along with this program; if not, write to the Free Software | ||
17 | Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA | ||
18 | |||
19 | $Id: elan-104nc.c,v 1.25 2004/11/28 09:40:39 dwmw2 Exp $ | ||
20 | |||
21 | The ELAN-104NC has up to 8 Mibyte of Intel StrataFlash (28F320/28F640) in x16 | ||
22 | mode. This drivers uses the CFI probe and Intel Extended Command Set drivers. | ||
23 | |||
24 | The flash is accessed as follows: | ||
25 | |||
26 | 32 kbyte memory window at 0xb0000-0xb7fff | ||
27 | |||
28 | 16 bit I/O port (0x22) for some sort of paging. | ||
29 | |||
30 | The single flash device is divided into 3 partition which appear as separate | ||
31 | MTD devices. | ||
32 | |||
33 | Linux thinks that the I/O port is used by the PIC and hence check_region() will | ||
34 | always fail. So we don't do it. I just hope it doesn't break anything. | ||
35 | */ | ||
36 | #include <linux/module.h> | ||
37 | #include <linux/slab.h> | ||
38 | #include <linux/ioport.h> | ||
39 | #include <linux/init.h> | ||
40 | #include <asm/io.h> | ||
41 | |||
42 | #include <linux/mtd/map.h> | ||
43 | #include <linux/mtd/mtd.h> | ||
44 | #include <linux/mtd/partitions.h> | ||
45 | |||
46 | #define WINDOW_START 0xb0000 | ||
47 | /* Number of bits in offset. */ | ||
48 | #define WINDOW_SHIFT 15 | ||
49 | #define WINDOW_LENGTH (1 << WINDOW_SHIFT) | ||
50 | /* The bits for the offset into the window. */ | ||
51 | #define WINDOW_MASK (WINDOW_LENGTH-1) | ||
52 | #define PAGE_IO 0x22 | ||
53 | #define PAGE_IO_SIZE 2 | ||
54 | |||
55 | static volatile int page_in_window = -1; // Current page in window. | ||
56 | static void __iomem *iomapadr; | ||
57 | static DEFINE_SPINLOCK(elan_104nc_spin); | ||
58 | |||
59 | /* partition_info gives details on the logical partitions that the split the | ||
60 | * single flash device into. If the size if zero we use up to the end of the | ||
61 | * device. */ | ||
62 | static struct mtd_partition partition_info[]={ | ||
63 | { .name = "ELAN-104NC flash boot partition", | ||
64 | .offset = 0, | ||
65 | .size = 640*1024 }, | ||
66 | { .name = "ELAN-104NC flash partition 1", | ||
67 | .offset = 640*1024, | ||
68 | .size = 896*1024 }, | ||
69 | { .name = "ELAN-104NC flash partition 2", | ||
70 | .offset = (640+896)*1024 } | ||
71 | }; | ||
72 | #define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0])) | ||
73 | |||
74 | /* | ||
75 | * If no idea what is going on here. This is taken from the FlashFX stuff. | ||
76 | */ | ||
77 | #define ROMCS 1 | ||
78 | |||
79 | static inline void elan_104nc_setup(void) | ||
80 | { | ||
81 | u16 t; | ||
82 | |||
83 | outw( 0x0023 + ROMCS*2, PAGE_IO ); | ||
84 | t=inb( PAGE_IO+1 ); | ||
85 | |||
86 | t=(t & 0xf9) | 0x04; | ||
87 | |||
88 | outw( ((0x0023 + ROMCS*2) | (t << 8)), PAGE_IO ); | ||
89 | } | ||
90 | |||
91 | static inline void elan_104nc_page(struct map_info *map, unsigned long ofs) | ||
92 | { | ||
93 | unsigned long page = ofs >> WINDOW_SHIFT; | ||
94 | |||
95 | if( page!=page_in_window ) { | ||
96 | int cmd1; | ||
97 | int cmd2; | ||
98 | |||
99 | cmd1=(page & 0x700) + 0x0833 + ROMCS*0x4000; | ||
100 | cmd2=((page & 0xff) << 8) + 0x0032; | ||
101 | |||
102 | outw( cmd1, PAGE_IO ); | ||
103 | outw( cmd2, PAGE_IO ); | ||
104 | |||
105 | page_in_window = page; | ||
106 | } | ||
107 | } | ||
108 | |||
109 | |||
110 | static map_word elan_104nc_read16(struct map_info *map, unsigned long ofs) | ||
111 | { | ||
112 | map_word ret; | ||
113 | spin_lock(&elan_104nc_spin); | ||
114 | elan_104nc_page(map, ofs); | ||
115 | ret.x[0] = readw(iomapadr + (ofs & WINDOW_MASK)); | ||
116 | spin_unlock(&elan_104nc_spin); | ||
117 | return ret; | ||
118 | } | ||
119 | |||
120 | static void elan_104nc_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) | ||
121 | { | ||
122 | while (len) { | ||
123 | unsigned long thislen = len; | ||
124 | if (len > (WINDOW_LENGTH - (from & WINDOW_MASK))) | ||
125 | thislen = WINDOW_LENGTH-(from & WINDOW_MASK); | ||
126 | |||
127 | spin_lock(&elan_104nc_spin); | ||
128 | elan_104nc_page(map, from); | ||
129 | memcpy_fromio(to, iomapadr + (from & WINDOW_MASK), thislen); | ||
130 | spin_unlock(&elan_104nc_spin); | ||
131 | to += thislen; | ||
132 | from += thislen; | ||
133 | len -= thislen; | ||
134 | } | ||
135 | } | ||
136 | |||
137 | static void elan_104nc_write16(struct map_info *map, map_word d, unsigned long adr) | ||
138 | { | ||
139 | spin_lock(&elan_104nc_spin); | ||
140 | elan_104nc_page(map, adr); | ||
141 | writew(d.x[0], iomapadr + (adr & WINDOW_MASK)); | ||
142 | spin_unlock(&elan_104nc_spin); | ||
143 | } | ||
144 | |||
145 | static void elan_104nc_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) | ||
146 | { | ||
147 | while(len) { | ||
148 | unsigned long thislen = len; | ||
149 | if (len > (WINDOW_LENGTH - (to & WINDOW_MASK))) | ||
150 | thislen = WINDOW_LENGTH-(to & WINDOW_MASK); | ||
151 | |||
152 | spin_lock(&elan_104nc_spin); | ||
153 | elan_104nc_page(map, to); | ||
154 | memcpy_toio(iomapadr + (to & WINDOW_MASK), from, thislen); | ||
155 | spin_unlock(&elan_104nc_spin); | ||
156 | to += thislen; | ||
157 | from += thislen; | ||
158 | len -= thislen; | ||
159 | } | ||
160 | } | ||
161 | |||
162 | static struct map_info elan_104nc_map = { | ||
163 | .name = "ELAN-104NC flash", | ||
164 | .phys = NO_XIP, | ||
165 | .size = 8*1024*1024, /* this must be set to a maximum possible amount | ||
166 | of flash so the cfi probe routines find all | ||
167 | the chips */ | ||
168 | .bankwidth = 2, | ||
169 | .read = elan_104nc_read16, | ||
170 | .copy_from = elan_104nc_copy_from, | ||
171 | .write = elan_104nc_write16, | ||
172 | .copy_to = elan_104nc_copy_to | ||
173 | }; | ||
174 | |||
175 | /* MTD device for all of the flash. */ | ||
176 | static struct mtd_info *all_mtd; | ||
177 | |||
178 | static void cleanup_elan_104nc(void) | ||
179 | { | ||
180 | if( all_mtd ) { | ||
181 | del_mtd_partitions( all_mtd ); | ||
182 | map_destroy( all_mtd ); | ||
183 | } | ||
184 | |||
185 | iounmap(iomapadr); | ||
186 | } | ||
187 | |||
188 | static int __init init_elan_104nc(void) | ||
189 | { | ||
190 | /* Urg! We use I/O port 0x22 without request_region()ing it, | ||
191 | because it's already allocated to the PIC. */ | ||
192 | |||
193 | iomapadr = ioremap(WINDOW_START, WINDOW_LENGTH); | ||
194 | if (!iomapadr) { | ||
195 | printk( KERN_ERR"%s: failed to ioremap memory region\n", | ||
196 | elan_104nc_map.name ); | ||
197 | return -EIO; | ||
198 | } | ||
199 | |||
200 | printk( KERN_INFO"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n", | ||
201 | elan_104nc_map.name, | ||
202 | PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1, | ||
203 | WINDOW_START, WINDOW_START+WINDOW_LENGTH-1 ); | ||
204 | |||
205 | elan_104nc_setup(); | ||
206 | |||
207 | /* Probe for chip. */ | ||
208 | all_mtd = do_map_probe("cfi_probe", &elan_104nc_map ); | ||
209 | if( !all_mtd ) { | ||
210 | cleanup_elan_104nc(); | ||
211 | return -ENXIO; | ||
212 | } | ||
213 | |||
214 | all_mtd->owner = THIS_MODULE; | ||
215 | |||
216 | /* Create MTD devices for each partition. */ | ||
217 | add_mtd_partitions( all_mtd, partition_info, NUM_PARTITIONS ); | ||
218 | |||
219 | return 0; | ||
220 | } | ||
221 | |||
222 | module_init(init_elan_104nc); | ||
223 | module_exit(cleanup_elan_104nc); | ||
224 | |||
225 | |||
226 | MODULE_LICENSE("GPL"); | ||
227 | MODULE_AUTHOR("Arcom Control Systems Ltd."); | ||
228 | MODULE_DESCRIPTION("MTD map driver for Arcom Control Systems ELAN-104NC"); | ||
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c index 29d1cc1bb426..e505207cd489 100644 --- a/drivers/mtd/maps/ichxrom.c +++ b/drivers/mtd/maps/ichxrom.c | |||
@@ -2,7 +2,7 @@ | |||
2 | * ichxrom.c | 2 | * ichxrom.c |
3 | * | 3 | * |
4 | * Normal mappings of chips in physical memory | 4 | * Normal mappings of chips in physical memory |
5 | * $Id: ichxrom.c,v 1.16 2004/11/28 09:40:39 dwmw2 Exp $ | 5 | * $Id: ichxrom.c,v 1.18 2005/07/07 10:26:20 dwmw2 Exp $ |
6 | */ | 6 | */ |
7 | 7 | ||
8 | #include <linux/module.h> | 8 | #include <linux/module.h> |
@@ -338,9 +338,9 @@ static struct pci_device_id ichxrom_pci_tbl[] __devinitdata = { | |||
338 | { 0, }, | 338 | { 0, }, |
339 | }; | 339 | }; |
340 | 340 | ||
341 | #if 0 | ||
341 | MODULE_DEVICE_TABLE(pci, ichxrom_pci_tbl); | 342 | MODULE_DEVICE_TABLE(pci, ichxrom_pci_tbl); |
342 | 343 | ||
343 | #if 0 | ||
344 | static struct pci_driver ichxrom_driver = { | 344 | static struct pci_driver ichxrom_driver = { |
345 | .name = MOD_NAME, | 345 | .name = MOD_NAME, |
346 | .id_table = ichxrom_pci_tbl, | 346 | .id_table = ichxrom_pci_tbl, |
@@ -366,7 +366,7 @@ static int __init init_ichxrom(void) | |||
366 | } | 366 | } |
367 | return -ENXIO; | 367 | return -ENXIO; |
368 | #if 0 | 368 | #if 0 |
369 | return pci_module_init(&ichxrom_driver); | 369 | return pci_register_driver(&ichxrom_driver); |
370 | #endif | 370 | #endif |
371 | } | 371 | } |
372 | 372 | ||
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c index c5b5f447e34b..3e94b616743d 100644 --- a/drivers/mtd/maps/ixp2000.c +++ b/drivers/mtd/maps/ixp2000.c | |||
@@ -1,5 +1,5 @@ | |||
1 | /* | 1 | /* |
2 | * $Id: ixp2000.c,v 1.5 2004/11/16 17:15:48 dsaxena Exp $ | 2 | * $Id: ixp2000.c,v 1.6 2005/03/18 14:07:46 gleixner Exp $ |
3 | * | 3 | * |
4 | * drivers/mtd/maps/ixp2000.c | 4 | * drivers/mtd/maps/ixp2000.c |
5 | * | 5 | * |
@@ -216,11 +216,6 @@ static int ixp2000_flash_probe(struct device *_dev) | |||
216 | goto Error; | 216 | goto Error; |
217 | } | 217 | } |
218 | 218 | ||
219 | /* | ||
220 | * Setup read mode for FLASH | ||
221 | */ | ||
222 | *IXP2000_SLOWPORT_FRM = 1; | ||
223 | |||
224 | #if defined(__ARMEB__) | 219 | #if defined(__ARMEB__) |
225 | /* | 220 | /* |
226 | * Enable erratum 44 workaround for NPUs with broken slowport | 221 | * Enable erratum 44 workaround for NPUs with broken slowport |
diff --git a/drivers/mtd/maps/mainstone-flash.c b/drivers/mtd/maps/mainstone-flash.c new file mode 100644 index 000000000000..87e93fa60588 --- /dev/null +++ b/drivers/mtd/maps/mainstone-flash.c | |||
@@ -0,0 +1,178 @@ | |||
1 | /* | ||
2 | * $Id: $ | ||
3 | * | ||
4 | * Map driver for the Mainstone developer platform. | ||
5 | * | ||
6 | * Author: Nicolas Pitre | ||
7 | * Copyright: (C) 2001 MontaVista Software Inc. | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify | ||
10 | * it under the terms of the GNU General Public License version 2 as | ||
11 | * published by the Free Software Foundation. | ||
12 | */ | ||
13 | |||
14 | #include <linux/module.h> | ||
15 | #include <linux/types.h> | ||
16 | #include <linux/kernel.h> | ||
17 | #include <linux/init.h> | ||
18 | #include <linux/dma-mapping.h> | ||
19 | #include <linux/mtd/mtd.h> | ||
20 | #include <linux/mtd/map.h> | ||
21 | #include <linux/mtd/partitions.h> | ||
22 | #include <asm/io.h> | ||
23 | #include <asm/hardware.h> | ||
24 | #include <asm/arch/pxa-regs.h> | ||
25 | #include <asm/arch/mainstone.h> | ||
26 | |||
27 | |||
28 | #define ROM_ADDR 0x00000000 | ||
29 | #define FLASH_ADDR 0x04000000 | ||
30 | |||
31 | #define WINDOW_SIZE 0x04000000 | ||
32 | |||
33 | static void mainstone_map_inval_cache(struct map_info *map, unsigned long from, | ||
34 | ssize_t len) | ||
35 | { | ||
36 | consistent_sync((char *)map->cached + from, len, DMA_FROM_DEVICE); | ||
37 | } | ||
38 | |||
39 | static struct map_info mainstone_maps[2] = { { | ||
40 | .size = WINDOW_SIZE, | ||
41 | .phys = PXA_CS0_PHYS, | ||
42 | .inval_cache = mainstone_map_inval_cache, | ||
43 | }, { | ||
44 | .size = WINDOW_SIZE, | ||
45 | .phys = PXA_CS1_PHYS, | ||
46 | .inval_cache = mainstone_map_inval_cache, | ||
47 | } }; | ||
48 | |||
49 | static struct mtd_partition mainstone_partitions[] = { | ||
50 | { | ||
51 | .name = "Bootloader", | ||
52 | .size = 0x00040000, | ||
53 | .offset = 0, | ||
54 | .mask_flags = MTD_WRITEABLE /* force read-only */ | ||
55 | },{ | ||
56 | .name = "Kernel", | ||
57 | .size = 0x00400000, | ||
58 | .offset = 0x00040000, | ||
59 | },{ | ||
60 | .name = "Filesystem", | ||
61 | .size = MTDPART_SIZ_FULL, | ||
62 | .offset = 0x00440000 | ||
63 | } | ||
64 | }; | ||
65 | |||
66 | static struct mtd_info *mymtds[2]; | ||
67 | static struct mtd_partition *parsed_parts[2]; | ||
68 | static int nr_parsed_parts[2]; | ||
69 | |||
70 | static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; | ||
71 | |||
72 | static int __init init_mainstone(void) | ||
73 | { | ||
74 | int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */ | ||
75 | int ret = 0, i; | ||
76 | |||
77 | mainstone_maps[0].bankwidth = (BOOT_DEF & 1) ? 2 : 4; | ||
78 | mainstone_maps[1].bankwidth = 4; | ||
79 | |||
80 | /* Compensate for SW7 which swaps the flash banks */ | ||
81 | mainstone_maps[SW7].name = "processor flash"; | ||
82 | mainstone_maps[SW7 ^ 1].name = "main board flash"; | ||
83 | |||
84 | printk(KERN_NOTICE "Mainstone configured to boot from %s\n", | ||
85 | mainstone_maps[0].name); | ||
86 | |||
87 | for (i = 0; i < 2; i++) { | ||
88 | mainstone_maps[i].virt = ioremap(mainstone_maps[i].phys, | ||
89 | WINDOW_SIZE); | ||
90 | if (!mainstone_maps[i].virt) { | ||
91 | printk(KERN_WARNING "Failed to ioremap %s\n", | ||
92 | mainstone_maps[i].name); | ||
93 | if (!ret) | ||
94 | ret = -ENOMEM; | ||
95 | continue; | ||
96 | } | ||
97 | mainstone_maps[i].cached = | ||
98 | ioremap_cached(mainstone_maps[i].phys, WINDOW_SIZE); | ||
99 | if (!mainstone_maps[i].cached) | ||
100 | printk(KERN_WARNING "Failed to ioremap cached %s\n", | ||
101 | mainstone_maps[i].name); | ||
102 | simple_map_init(&mainstone_maps[i]); | ||
103 | |||
104 | printk(KERN_NOTICE | ||
105 | "Probing %s at physical address 0x%08lx" | ||
106 | " (%d-bit bankwidth)\n", | ||
107 | mainstone_maps[i].name, mainstone_maps[i].phys, | ||
108 | mainstone_maps[i].bankwidth * 8); | ||
109 | |||
110 | mymtds[i] = do_map_probe("cfi_probe", &mainstone_maps[i]); | ||
111 | |||
112 | if (!mymtds[i]) { | ||
113 | iounmap((void *)mainstone_maps[i].virt); | ||
114 | if (mainstone_maps[i].cached) | ||
115 | iounmap(mainstone_maps[i].cached); | ||
116 | if (!ret) | ||
117 | ret = -EIO; | ||
118 | continue; | ||
119 | } | ||
120 | mymtds[i]->owner = THIS_MODULE; | ||
121 | |||
122 | ret = parse_mtd_partitions(mymtds[i], probes, | ||
123 | &parsed_parts[i], 0); | ||
124 | |||
125 | if (ret > 0) | ||
126 | nr_parsed_parts[i] = ret; | ||
127 | } | ||
128 | |||
129 | if (!mymtds[0] && !mymtds[1]) | ||
130 | return ret; | ||
131 | |||
132 | for (i = 0; i < 2; i++) { | ||
133 | if (!mymtds[i]) { | ||
134 | printk(KERN_WARNING "%s is absent. Skipping\n", | ||
135 | mainstone_maps[i].name); | ||
136 | } else if (nr_parsed_parts[i]) { | ||
137 | add_mtd_partitions(mymtds[i], parsed_parts[i], | ||
138 | nr_parsed_parts[i]); | ||
139 | } else if (!i) { | ||
140 | printk("Using static partitions on %s\n", | ||
141 | mainstone_maps[i].name); | ||
142 | add_mtd_partitions(mymtds[i], mainstone_partitions, | ||
143 | ARRAY_SIZE(mainstone_partitions)); | ||
144 | } else { | ||
145 | printk("Registering %s as whole device\n", | ||
146 | mainstone_maps[i].name); | ||
147 | add_mtd_device(mymtds[i]); | ||
148 | } | ||
149 | } | ||
150 | return 0; | ||
151 | } | ||
152 | |||
153 | static void __exit cleanup_mainstone(void) | ||
154 | { | ||
155 | int i; | ||
156 | for (i = 0; i < 2; i++) { | ||
157 | if (!mymtds[i]) | ||
158 | continue; | ||
159 | |||
160 | if (nr_parsed_parts[i] || !i) | ||
161 | del_mtd_partitions(mymtds[i]); | ||
162 | else | ||
163 | del_mtd_device(mymtds[i]); | ||
164 | |||
165 | map_destroy(mymtds[i]); | ||
166 | iounmap((void *)mainstone_maps[i].virt); | ||
167 | if (mainstone_maps[i].cached) | ||
168 | iounmap(mainstone_maps[i].cached); | ||
169 | kfree(parsed_parts[i]); | ||
170 | } | ||
171 | } | ||
172 | |||
173 | module_init(init_mainstone); | ||
174 | module_exit(cleanup_mainstone); | ||
175 | |||
176 | MODULE_LICENSE("GPL"); | ||
177 | MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>"); | ||
178 | MODULE_DESCRIPTION("MTD map driver for Intel Mainstone"); | ||
diff --git a/drivers/mtd/maps/map_funcs.c b/drivers/mtd/maps/map_funcs.c index 38f6a7af53f8..9105e6ca0aa6 100644 --- a/drivers/mtd/maps/map_funcs.c +++ b/drivers/mtd/maps/map_funcs.c | |||
@@ -1,5 +1,5 @@ | |||
1 | /* | 1 | /* |
2 | * $Id: map_funcs.c,v 1.9 2004/07/13 22:33:15 dwmw2 Exp $ | 2 | * $Id: map_funcs.c,v 1.10 2005/06/06 23:04:36 tpoynor Exp $ |
3 | * | 3 | * |
4 | * Out-of-line map I/O functions for simple maps when CONFIG_COMPLEX_MAPPINGS | 4 | * Out-of-line map I/O functions for simple maps when CONFIG_COMPLEX_MAPPINGS |
5 | * is enabled. | 5 | * is enabled. |
@@ -9,23 +9,24 @@ | |||
9 | #include <linux/module.h> | 9 | #include <linux/module.h> |
10 | 10 | ||
11 | #include <linux/mtd/map.h> | 11 | #include <linux/mtd/map.h> |
12 | #include <linux/mtd/xip.h> | ||
12 | 13 | ||
13 | static map_word simple_map_read(struct map_info *map, unsigned long ofs) | 14 | static map_word __xipram simple_map_read(struct map_info *map, unsigned long ofs) |
14 | { | 15 | { |
15 | return inline_map_read(map, ofs); | 16 | return inline_map_read(map, ofs); |
16 | } | 17 | } |
17 | 18 | ||
18 | static void simple_map_write(struct map_info *map, const map_word datum, unsigned long ofs) | 19 | static void __xipram simple_map_write(struct map_info *map, const map_word datum, unsigned long ofs) |
19 | { | 20 | { |
20 | inline_map_write(map, datum, ofs); | 21 | inline_map_write(map, datum, ofs); |
21 | } | 22 | } |
22 | 23 | ||
23 | static void simple_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) | 24 | static void __xipram simple_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) |
24 | { | 25 | { |
25 | inline_map_copy_from(map, to, from, len); | 26 | inline_map_copy_from(map, to, from, len); |
26 | } | 27 | } |
27 | 28 | ||
28 | static void simple_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) | 29 | static void __xipram simple_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) |
29 | { | 30 | { |
30 | inline_map_copy_to(map, to, from, len); | 31 | inline_map_copy_to(map, to, from, len); |
31 | } | 32 | } |
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c new file mode 100644 index 000000000000..8cc71409a328 --- /dev/null +++ b/drivers/mtd/maps/omap_nor.c | |||
@@ -0,0 +1,179 @@ | |||
1 | /* | ||
2 | * Flash memory support for various TI OMAP boards | ||
3 | * | ||
4 | * Copyright (C) 2001-2002 MontaVista Software Inc. | ||
5 | * Copyright (C) 2003-2004 Texas Instruments | ||
6 | * Copyright (C) 2004 Nokia Corporation | ||
7 | * | ||
8 | * Assembled using driver code copyright the companies above | ||
9 | * and written by David Brownell, Jian Zhang <jzhang@ti.com>, | ||
10 | * Tony Lindgren <tony@atomide.com> and others. | ||
11 | * | ||
12 | * This program is free software; you can redistribute it and/or modify it | ||
13 | * under the terms of the GNU General Public License as published by the | ||
14 | * Free Software Foundation; either version 2 of the License, or (at your | ||
15 | * option) any later version. | ||
16 | * | ||
17 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | ||
18 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | ||
19 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN | ||
20 | * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | ||
21 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | ||
22 | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF | ||
23 | * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON | ||
24 | * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | ||
25 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | ||
26 | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | ||
27 | * | ||
28 | * You should have received a copy of the GNU General Public License along | ||
29 | * with this program; if not, write to the Free Software Foundation, Inc., | ||
30 | * 675 Mass Ave, Cambridge, MA 02139, USA. | ||
31 | */ | ||
32 | |||
33 | #include <linux/device.h> | ||
34 | #include <linux/module.h> | ||
35 | #include <linux/types.h> | ||
36 | #include <linux/kernel.h> | ||
37 | #include <linux/init.h> | ||
38 | #include <linux/ioport.h> | ||
39 | #include <linux/mtd/mtd.h> | ||
40 | #include <linux/mtd/map.h> | ||
41 | #include <linux/mtd/partitions.h> | ||
42 | |||
43 | #include <asm/io.h> | ||
44 | #include <asm/hardware.h> | ||
45 | #include <asm/mach-types.h> | ||
46 | #include <asm/mach/flash.h> | ||
47 | #include <asm/arch/tc.h> | ||
48 | |||
49 | #ifdef CONFIG_MTD_PARTITIONS | ||
50 | static const char *part_probes[] = { /* "RedBoot", */ "cmdlinepart", NULL }; | ||
51 | #endif | ||
52 | |||
53 | struct omapflash_info { | ||
54 | struct mtd_partition *parts; | ||
55 | struct mtd_info *mtd; | ||
56 | struct map_info map; | ||
57 | }; | ||
58 | |||
59 | static void omap_set_vpp(struct map_info *map, int enable) | ||
60 | { | ||
61 | static int count; | ||
62 | |||
63 | if (enable) { | ||
64 | if (count++ == 0) | ||
65 | OMAP_EMIFS_CONFIG_REG |= OMAP_EMIFS_CONFIG_WP; | ||
66 | } else { | ||
67 | if (count && (--count == 0)) | ||
68 | OMAP_EMIFS_CONFIG_REG &= ~OMAP_EMIFS_CONFIG_WP; | ||
69 | } | ||
70 | } | ||
71 | |||
72 | static int __devinit omapflash_probe(struct device *dev) | ||
73 | { | ||
74 | int err; | ||
75 | struct omapflash_info *info; | ||
76 | struct platform_device *pdev = to_platform_device(dev); | ||
77 | struct flash_platform_data *pdata = pdev->dev.platform_data; | ||
78 | struct resource *res = pdev->resource; | ||
79 | unsigned long size = res->end - res->start + 1; | ||
80 | |||
81 | info = kmalloc(sizeof(struct omapflash_info), GFP_KERNEL); | ||
82 | if (!info) | ||
83 | return -ENOMEM; | ||
84 | |||
85 | memset(info, 0, sizeof(struct omapflash_info)); | ||
86 | |||
87 | if (!request_mem_region(res->start, size, "flash")) { | ||
88 | err = -EBUSY; | ||
89 | goto out_free_info; | ||
90 | } | ||
91 | |||
92 | info->map.virt = ioremap(res->start, size); | ||
93 | if (!info->map.virt) { | ||
94 | err = -ENOMEM; | ||
95 | goto out_release_mem_region; | ||
96 | } | ||
97 | info->map.name = pdev->dev.bus_id; | ||
98 | info->map.phys = res->start; | ||
99 | info->map.size = size; | ||
100 | info->map.bankwidth = pdata->width; | ||
101 | info->map.set_vpp = omap_set_vpp; | ||
102 | |||
103 | simple_map_init(&info->map); | ||
104 | info->mtd = do_map_probe(pdata->map_name, &info->map); | ||
105 | if (!info->mtd) { | ||
106 | err = -EIO; | ||
107 | goto out_iounmap; | ||
108 | } | ||
109 | info->mtd->owner = THIS_MODULE; | ||
110 | |||
111 | #ifdef CONFIG_MTD_PARTITIONS | ||
112 | err = parse_mtd_partitions(info->mtd, part_probes, &info->parts, 0); | ||
113 | if (err > 0) | ||
114 | add_mtd_partitions(info->mtd, info->parts, err); | ||
115 | else if (err < 0 && pdata->parts) | ||
116 | add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts); | ||
117 | else | ||
118 | #endif | ||
119 | add_mtd_device(info->mtd); | ||
120 | |||
121 | dev_set_drvdata(&pdev->dev, info); | ||
122 | |||
123 | return 0; | ||
124 | |||
125 | out_iounmap: | ||
126 | iounmap(info->map.virt); | ||
127 | out_release_mem_region: | ||
128 | release_mem_region(res->start, size); | ||
129 | out_free_info: | ||
130 | kfree(info); | ||
131 | |||
132 | return err; | ||
133 | } | ||
134 | |||
135 | static int __devexit omapflash_remove(struct device *dev) | ||
136 | { | ||
137 | struct platform_device *pdev = to_platform_device(dev); | ||
138 | struct omapflash_info *info = dev_get_drvdata(&pdev->dev); | ||
139 | |||
140 | dev_set_drvdata(&pdev->dev, NULL); | ||
141 | |||
142 | if (info) { | ||
143 | if (info->parts) { | ||
144 | del_mtd_partitions(info->mtd); | ||
145 | kfree(info->parts); | ||
146 | } else | ||
147 | del_mtd_device(info->mtd); | ||
148 | map_destroy(info->mtd); | ||
149 | release_mem_region(info->map.phys, info->map.size); | ||
150 | iounmap((void __iomem *) info->map.virt); | ||
151 | kfree(info); | ||
152 | } | ||
153 | |||
154 | return 0; | ||
155 | } | ||
156 | |||
157 | static struct device_driver omapflash_driver = { | ||
158 | .name = "omapflash", | ||
159 | .bus = &platform_bus_type, | ||
160 | .probe = omapflash_probe, | ||
161 | .remove = __devexit_p(omapflash_remove), | ||
162 | }; | ||
163 | |||
164 | static int __init omapflash_init(void) | ||
165 | { | ||
166 | return driver_register(&omapflash_driver); | ||
167 | } | ||
168 | |||
169 | static void __exit omapflash_exit(void) | ||
170 | { | ||
171 | driver_unregister(&omapflash_driver); | ||
172 | } | ||
173 | |||
174 | module_init(omapflash_init); | ||
175 | module_exit(omapflash_exit); | ||
176 | |||
177 | MODULE_LICENSE("GPL"); | ||
178 | MODULE_DESCRIPTION("MTD NOR map driver for TI OMAP boards"); | ||
179 | |||
diff --git a/drivers/mtd/maps/pb1550-flash.c b/drivers/mtd/maps/pb1550-flash.c deleted file mode 100644 index 1424726a219e..000000000000 --- a/drivers/mtd/maps/pb1550-flash.c +++ /dev/null | |||
@@ -1,203 +0,0 @@ | |||
1 | /* | ||
2 | * Flash memory access on Alchemy Pb1550 board | ||
3 | * | ||
4 | * $Id: pb1550-flash.c,v 1.6 2004/11/04 13:24:15 gleixner Exp $ | ||
5 | * | ||
6 | * (C) 2004 Embedded Edge, LLC, based on pb1550-flash.c: | ||
7 | * (C) 2003 Pete Popov <ppopov@pacbell.net> | ||
8 | * | ||
9 | */ | ||
10 | |||
11 | #include <linux/config.h> | ||
12 | #include <linux/init.h> | ||
13 | #include <linux/module.h> | ||
14 | #include <linux/types.h> | ||
15 | #include <linux/kernel.h> | ||
16 | |||
17 | #include <linux/mtd/mtd.h> | ||
18 | #include <linux/mtd/map.h> | ||
19 | #include <linux/mtd/partitions.h> | ||
20 | |||
21 | #include <asm/io.h> | ||
22 | #include <asm/au1000.h> | ||
23 | #include <asm/pb1550.h> | ||
24 | |||
25 | #ifdef DEBUG_RW | ||
26 | #define DBG(x...) printk(x) | ||
27 | #else | ||
28 | #define DBG(x...) | ||
29 | #endif | ||
30 | |||
31 | static unsigned long window_addr; | ||
32 | static unsigned long window_size; | ||
33 | |||
34 | |||
35 | static struct map_info pb1550_map = { | ||
36 | .name = "Pb1550 flash", | ||
37 | }; | ||
38 | |||
39 | static unsigned char flash_bankwidth = 4; | ||
40 | |||
41 | /* | ||
42 | * Support only 64MB NOR Flash parts | ||
43 | */ | ||
44 | |||
45 | #ifdef PB1550_BOTH_BANKS | ||
46 | /* both banks will be used. Combine the first bank and the first | ||
47 | * part of the second bank together into a single jffs/jffs2 | ||
48 | * partition. | ||
49 | */ | ||
50 | static struct mtd_partition pb1550_partitions[] = { | ||
51 | /* assume boot[2:0]:swap is '0000' or '1000', which translates to: | ||
52 | * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash | ||
53 | * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash | ||
54 | */ | ||
55 | { | ||
56 | .name = "User FS", | ||
57 | .size = (0x1FC00000 - 0x18000000), | ||
58 | .offset = 0x0000000 | ||
59 | },{ | ||
60 | .name = "yamon", | ||
61 | .size = 0x0100000, | ||
62 | .offset = MTDPART_OFS_APPEND, | ||
63 | .mask_flags = MTD_WRITEABLE | ||
64 | },{ | ||
65 | .name = "raw kernel", | ||
66 | .size = (0x300000 - 0x40000), /* last 256KB is yamon env */ | ||
67 | .offset = MTDPART_OFS_APPEND, | ||
68 | } | ||
69 | }; | ||
70 | #elif defined(PB1550_BOOT_ONLY) | ||
71 | static struct mtd_partition pb1550_partitions[] = { | ||
72 | /* assume boot[2:0]:swap is '0000' or '1000', which translates to: | ||
73 | * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash | ||
74 | */ | ||
75 | { | ||
76 | .name = "User FS", | ||
77 | .size = 0x03c00000, | ||
78 | .offset = 0x0000000 | ||
79 | },{ | ||
80 | .name = "yamon", | ||
81 | .size = 0x0100000, | ||
82 | .offset = MTDPART_OFS_APPEND, | ||
83 | .mask_flags = MTD_WRITEABLE | ||
84 | },{ | ||
85 | .name = "raw kernel", | ||
86 | .size = (0x300000-0x40000), /* last 256KB is yamon env */ | ||
87 | .offset = MTDPART_OFS_APPEND, | ||
88 | } | ||
89 | }; | ||
90 | #elif defined(PB1550_USER_ONLY) | ||
91 | static struct mtd_partition pb1550_partitions[] = { | ||
92 | /* assume boot[2:0]:swap is '0000' or '1000', which translates to: | ||
93 | * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash | ||
94 | */ | ||
95 | { | ||
96 | .name = "User FS", | ||
97 | .size = (0x4000000 - 0x200000), /* reserve 2MB for raw kernel */ | ||
98 | .offset = 0x0000000 | ||
99 | },{ | ||
100 | .name = "raw kernel", | ||
101 | .size = MTDPART_SIZ_FULL, | ||
102 | .offset = MTDPART_OFS_APPEND, | ||
103 | } | ||
104 | }; | ||
105 | #else | ||
106 | #error MTD_PB1550 define combo error /* should never happen */ | ||
107 | #endif | ||
108 | |||
109 | #define NB_OF(x) (sizeof(x)/sizeof(x[0])) | ||
110 | |||
111 | static struct mtd_info *mymtd; | ||
112 | |||
113 | /* | ||
114 | * Probe the flash density and setup window address and size | ||
115 | * based on user CONFIG options. There are times when we don't | ||
116 | * want the MTD driver to be probing the boot or user flash, | ||
117 | * so having the option to enable only one bank is important. | ||
118 | */ | ||
119 | int setup_flash_params(void) | ||
120 | { | ||
121 | u16 boot_swapboot; | ||
122 | boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) | | ||
123 | ((bcsr->status >> 6) & 0x1); | ||
124 | printk("Pb1550 MTD: boot:swap %d\n", boot_swapboot); | ||
125 | |||
126 | switch (boot_swapboot) { | ||
127 | case 0: /* 512Mbit devices, both enabled */ | ||
128 | case 1: | ||
129 | case 8: | ||
130 | case 9: | ||
131 | #if defined(PB1550_BOTH_BANKS) | ||
132 | window_addr = 0x18000000; | ||
133 | window_size = 0x8000000; | ||
134 | #elif defined(PB1550_BOOT_ONLY) | ||
135 | window_addr = 0x1C000000; | ||
136 | window_size = 0x4000000; | ||
137 | #else /* USER ONLY */ | ||
138 | window_addr = 0x1E000000; | ||
139 | window_size = 0x4000000; | ||
140 | #endif | ||
141 | break; | ||
142 | case 0xC: | ||
143 | case 0xD: | ||
144 | case 0xE: | ||
145 | case 0xF: | ||
146 | /* 64 MB Boot NOR Flash is disabled */ | ||
147 | /* and the start address is moved to 0x0C00000 */ | ||
148 | window_addr = 0x0C000000; | ||
149 | window_size = 0x4000000; | ||
150 | default: | ||
151 | printk("Pb1550 MTD: unsupported boot:swap setting\n"); | ||
152 | return 1; | ||
153 | } | ||
154 | return 0; | ||
155 | } | ||
156 | |||
157 | int __init pb1550_mtd_init(void) | ||
158 | { | ||
159 | struct mtd_partition *parts; | ||
160 | int nb_parts = 0; | ||
161 | |||
162 | /* Default flash bankwidth */ | ||
163 | pb1550_map.bankwidth = flash_bankwidth; | ||
164 | |||
165 | if (setup_flash_params()) | ||
166 | return -ENXIO; | ||
167 | |||
168 | /* | ||
169 | * Static partition definition selection | ||
170 | */ | ||
171 | parts = pb1550_partitions; | ||
172 | nb_parts = NB_OF(pb1550_partitions); | ||
173 | pb1550_map.size = window_size; | ||
174 | |||
175 | /* | ||
176 | * Now let's probe for the actual flash. Do it here since | ||
177 | * specific machine settings might have been set above. | ||
178 | */ | ||
179 | printk(KERN_NOTICE "Pb1550 flash: probing %d-bit flash bus\n", | ||
180 | pb1550_map.bankwidth*8); | ||
181 | pb1550_map.virt = ioremap(window_addr, window_size); | ||
182 | mymtd = do_map_probe("cfi_probe", &pb1550_map); | ||
183 | if (!mymtd) return -ENXIO; | ||
184 | mymtd->owner = THIS_MODULE; | ||
185 | |||
186 | add_mtd_partitions(mymtd, parts, nb_parts); | ||
187 | return 0; | ||
188 | } | ||
189 | |||
190 | static void __exit pb1550_mtd_cleanup(void) | ||
191 | { | ||
192 | if (mymtd) { | ||
193 | del_mtd_partitions(mymtd); | ||
194 | map_destroy(mymtd); | ||
195 | } | ||
196 | } | ||
197 | |||
198 | module_init(pb1550_mtd_init); | ||
199 | module_exit(pb1550_mtd_cleanup); | ||
200 | |||
201 | MODULE_AUTHOR("Embedded Edge, LLC"); | ||
202 | MODULE_DESCRIPTION("Pb1550 mtd map driver"); | ||
203 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/mtd/maps/pb1xxx-flash.c b/drivers/mtd/maps/pb1xxx-flash.c deleted file mode 100644 index 06e731540552..000000000000 --- a/drivers/mtd/maps/pb1xxx-flash.c +++ /dev/null | |||
@@ -1,178 +0,0 @@ | |||
1 | /* | ||
2 | * Flash memory access on Alchemy Pb1xxx boards | ||
3 | * | ||
4 | * (C) 2001 Pete Popov <ppopov@mvista.com> | ||
5 | * | ||
6 | * $Id: pb1xxx-flash.c,v 1.14 2004/11/04 13:24:15 gleixner Exp $ | ||
7 | */ | ||
8 | |||
9 | #include <linux/config.h> | ||
10 | #include <linux/module.h> | ||
11 | #include <linux/types.h> | ||
12 | #include <linux/init.h> | ||
13 | #include <linux/kernel.h> | ||
14 | |||
15 | #include <linux/mtd/mtd.h> | ||
16 | #include <linux/mtd/map.h> | ||
17 | #include <linux/mtd/partitions.h> | ||
18 | |||
19 | #include <asm/io.h> | ||
20 | |||
21 | #ifdef DEBUG_RW | ||
22 | #define DBG(x...) printk(x) | ||
23 | #else | ||
24 | #define DBG(x...) | ||
25 | #endif | ||
26 | |||
27 | #ifdef CONFIG_MIPS_PB1000 | ||
28 | |||
29 | #define WINDOW_ADDR 0x1F800000 | ||
30 | #define WINDOW_SIZE 0x800000 | ||
31 | |||
32 | static struct mtd_partition pb1xxx_partitions[] = { | ||
33 | { | ||
34 | .name = "yamon env", | ||
35 | .size = 0x00020000, | ||
36 | .offset = 0, | ||
37 | .mask_flags = MTD_WRITEABLE}, | ||
38 | { | ||
39 | .name = "User FS", | ||
40 | .size = 0x003e0000, | ||
41 | .offset = 0x20000,}, | ||
42 | { | ||
43 | .name = "boot code", | ||
44 | .size = 0x100000, | ||
45 | .offset = 0x400000, | ||
46 | .mask_flags = MTD_WRITEABLE}, | ||
47 | { | ||
48 | .name = "raw/kernel", | ||
49 | .size = 0x300000, | ||
50 | .offset = 0x500000} | ||
51 | }; | ||
52 | |||
53 | #elif defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1100) | ||
54 | |||
55 | #if defined(CONFIG_MTD_PB1500_BOOT) && defined(CONFIG_MTD_PB1500_USER) | ||
56 | /* both 32MB banks will be used. Combine the first 32MB bank and the | ||
57 | * first 28MB of the second bank together into a single jffs/jffs2 | ||
58 | * partition. | ||
59 | */ | ||
60 | #define WINDOW_ADDR 0x1C000000 | ||
61 | #define WINDOW_SIZE 0x4000000 | ||
62 | static struct mtd_partition pb1xxx_partitions[] = { | ||
63 | { | ||
64 | .name = "User FS", | ||
65 | .size = 0x3c00000, | ||
66 | .offset = 0x0000000 | ||
67 | },{ | ||
68 | .name = "yamon", | ||
69 | .size = 0x0100000, | ||
70 | .offset = 0x3c00000, | ||
71 | .mask_flags = MTD_WRITEABLE | ||
72 | },{ | ||
73 | .name = "raw kernel", | ||
74 | .size = 0x02c0000, | ||
75 | .offset = 0x3d00000 | ||
76 | } | ||
77 | }; | ||
78 | #elif defined(CONFIG_MTD_PB1500_BOOT) && !defined(CONFIG_MTD_PB1500_USER) | ||
79 | #define WINDOW_ADDR 0x1E000000 | ||
80 | #define WINDOW_SIZE 0x2000000 | ||
81 | static struct mtd_partition pb1xxx_partitions[] = { | ||
82 | { | ||
83 | .name = "User FS", | ||
84 | .size = 0x1c00000, | ||
85 | .offset = 0x0000000 | ||
86 | },{ | ||
87 | .name = "yamon", | ||
88 | .size = 0x0100000, | ||
89 | .offset = 0x1c00000, | ||
90 | .mask_flags = MTD_WRITEABLE | ||
91 | },{ | ||
92 | .name = "raw kernel", | ||
93 | .size = 0x02c0000, | ||
94 | .offset = 0x1d00000 | ||
95 | } | ||
96 | }; | ||
97 | #elif !defined(CONFIG_MTD_PB1500_BOOT) && defined(CONFIG_MTD_PB1500_USER) | ||
98 | #define WINDOW_ADDR 0x1C000000 | ||
99 | #define WINDOW_SIZE 0x2000000 | ||
100 | static struct mtd_partition pb1xxx_partitions[] = { | ||
101 | { | ||
102 | .name = "User FS", | ||
103 | .size = 0x1e00000, | ||
104 | .offset = 0x0000000 | ||
105 | },{ | ||
106 | .name = "raw kernel", | ||
107 | .size = 0x0200000, | ||
108 | .offset = 0x1e00000, | ||
109 | } | ||
110 | }; | ||
111 | #else | ||
112 | #error MTD_PB1500 define combo error /* should never happen */ | ||
113 | #endif | ||
114 | #else | ||
115 | #error Unsupported board | ||
116 | #endif | ||
117 | |||
118 | #define NAME "Pb1x00 Linux Flash" | ||
119 | #define PADDR WINDOW_ADDR | ||
120 | #define BUSWIDTH 4 | ||
121 | #define SIZE WINDOW_SIZE | ||
122 | #define PARTITIONS 4 | ||
123 | |||
124 | static struct map_info pb1xxx_mtd_map = { | ||
125 | .name = NAME, | ||
126 | .size = SIZE, | ||
127 | .bankwidth = BUSWIDTH, | ||
128 | .phys = PADDR, | ||
129 | }; | ||
130 | |||
131 | static struct mtd_info *pb1xxx_mtd; | ||
132 | |||
133 | int __init pb1xxx_mtd_init(void) | ||
134 | { | ||
135 | struct mtd_partition *parts; | ||
136 | int nb_parts = 0; | ||
137 | char *part_type; | ||
138 | |||
139 | /* | ||
140 | * Static partition definition selection | ||
141 | */ | ||
142 | part_type = "static"; | ||
143 | parts = pb1xxx_partitions; | ||
144 | nb_parts = ARRAY_SIZE(pb1xxx_partitions); | ||
145 | |||
146 | /* | ||
147 | * Now let's probe for the actual flash. Do it here since | ||
148 | * specific machine settings might have been set above. | ||
149 | */ | ||
150 | printk(KERN_NOTICE "Pb1xxx flash: probing %d-bit flash bus\n", | ||
151 | BUSWIDTH*8); | ||
152 | pb1xxx_mtd_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE); | ||
153 | |||
154 | simple_map_init(&pb1xxx_mtd_map); | ||
155 | |||
156 | pb1xxx_mtd = do_map_probe("cfi_probe", &pb1xxx_mtd_map); | ||
157 | if (!pb1xxx_mtd) return -ENXIO; | ||
158 | pb1xxx_mtd->owner = THIS_MODULE; | ||
159 | |||
160 | add_mtd_partitions(pb1xxx_mtd, parts, nb_parts); | ||
161 | return 0; | ||
162 | } | ||
163 | |||
164 | static void __exit pb1xxx_mtd_cleanup(void) | ||
165 | { | ||
166 | if (pb1xxx_mtd) { | ||
167 | del_mtd_partitions(pb1xxx_mtd); | ||
168 | map_destroy(pb1xxx_mtd); | ||
169 | iounmap((void *) pb1xxx_mtd_map.virt); | ||
170 | } | ||
171 | } | ||
172 | |||
173 | module_init(pb1xxx_mtd_init); | ||
174 | module_exit(pb1xxx_mtd_cleanup); | ||
175 | |||
176 | MODULE_AUTHOR("Pete Popov"); | ||
177 | MODULE_DESCRIPTION("Pb1xxx CFI map driver"); | ||
178 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c index 08b60bdc5381..18dbd3af1eaa 100644 --- a/drivers/mtd/maps/pci.c +++ b/drivers/mtd/maps/pci.c | |||
@@ -7,7 +7,7 @@ | |||
7 | * it under the terms of the GNU General Public License version 2 as | 7 | * it under the terms of the GNU General Public License version 2 as |
8 | * published by the Free Software Foundation. | 8 | * published by the Free Software Foundation. |
9 | * | 9 | * |
10 | * $Id: pci.c,v 1.9 2004/11/28 09:40:40 dwmw2 Exp $ | 10 | * $Id: pci.c,v 1.10 2005/03/18 14:04:35 gleixner Exp $ |
11 | * | 11 | * |
12 | * Generic PCI memory map driver. We support the following boards: | 12 | * Generic PCI memory map driver. We support the following boards: |
13 | * - Intel IQ80310 ATU. | 13 | * - Intel IQ80310 ATU. |
@@ -370,7 +370,7 @@ static struct pci_driver mtd_pci_driver = { | |||
370 | 370 | ||
371 | static int __init mtd_pci_maps_init(void) | 371 | static int __init mtd_pci_maps_init(void) |
372 | { | 372 | { |
373 | return pci_module_init(&mtd_pci_driver); | 373 | return pci_register_driver(&mtd_pci_driver); |
374 | } | 374 | } |
375 | 375 | ||
376 | static void __exit mtd_pci_maps_exit(void) | 376 | static void __exit mtd_pci_maps_exit(void) |
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c new file mode 100644 index 000000000000..118b04544cad --- /dev/null +++ b/drivers/mtd/maps/plat-ram.c | |||
@@ -0,0 +1,278 @@ | |||
1 | /* drivers/mtd/maps/plat-ram.c | ||
2 | * | ||
3 | * (c) 2004-2005 Simtec Electronics | ||
4 | * http://www.simtec.co.uk/products/SWLINUX/ | ||
5 | * Ben Dooks <ben@simtec.co.uk> | ||
6 | * | ||
7 | * Generic platfrom device based RAM map | ||
8 | * | ||
9 | * $Id: plat-ram.c,v 1.3 2005/03/19 22:41:27 gleixner Exp $ | ||
10 | * | ||
11 | * This program is free software; you can redistribute it and/or modify | ||
12 | * it under the terms of the GNU General Public License as published by | ||
13 | * the Free Software Foundation; either version 2 of the License, or | ||
14 | * (at your option) any later version. | ||
15 | * | ||
16 | * This program is distributed in the hope that it will be useful, | ||
17 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
18 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
19 | * GNU General Public License for more details. | ||
20 | * | ||
21 | * You should have received a copy of the GNU General Public License | ||
22 | * along with this program; if not, write to the Free Software | ||
23 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | ||
24 | */ | ||
25 | |||
26 | #include <linux/module.h> | ||
27 | #include <linux/types.h> | ||
28 | #include <linux/init.h> | ||
29 | #include <linux/kernel.h> | ||
30 | #include <linux/string.h> | ||
31 | #include <linux/ioport.h> | ||
32 | #include <linux/device.h> | ||
33 | |||
34 | #include <linux/mtd/mtd.h> | ||
35 | #include <linux/mtd/map.h> | ||
36 | #include <linux/mtd/partitions.h> | ||
37 | #include <linux/mtd/plat-ram.h> | ||
38 | |||
39 | #include <asm/io.h> | ||
40 | |||
41 | /* private structure for each mtd platform ram device created */ | ||
42 | |||
43 | struct platram_info { | ||
44 | struct device *dev; | ||
45 | struct mtd_info *mtd; | ||
46 | struct map_info map; | ||
47 | struct mtd_partition *partitions; | ||
48 | struct resource *area; | ||
49 | struct platdata_mtd_ram *pdata; | ||
50 | }; | ||
51 | |||
52 | /* to_platram_info() | ||
53 | * | ||
54 | * device private data to struct platram_info conversion | ||
55 | */ | ||
56 | |||
57 | static inline struct platram_info *to_platram_info(struct device *dev) | ||
58 | { | ||
59 | return (struct platram_info *)dev_get_drvdata(dev); | ||
60 | } | ||
61 | |||
62 | /* platram_setrw | ||
63 | * | ||
64 | * call the platform device's set rw/ro control | ||
65 | * | ||
66 | * to = 0 => read-only | ||
67 | * = 1 => read-write | ||
68 | */ | ||
69 | |||
70 | static inline void platram_setrw(struct platram_info *info, int to) | ||
71 | { | ||
72 | if (info->pdata == NULL) | ||
73 | return; | ||
74 | |||
75 | if (info->pdata->set_rw != NULL) | ||
76 | (info->pdata->set_rw)(info->dev, to); | ||
77 | } | ||
78 | |||
79 | /* platram_remove | ||
80 | * | ||
81 | * called to remove the device from the driver's control | ||
82 | */ | ||
83 | |||
84 | static int platram_remove(struct device *dev) | ||
85 | { | ||
86 | struct platram_info *info = to_platram_info(dev); | ||
87 | |||
88 | dev_set_drvdata(dev, NULL); | ||
89 | |||
90 | dev_dbg(dev, "removing device\n"); | ||
91 | |||
92 | if (info == NULL) | ||
93 | return 0; | ||
94 | |||
95 | if (info->mtd) { | ||
96 | #ifdef CONFIG_MTD_PARTITIONS | ||
97 | if (info->partitions) { | ||
98 | del_mtd_partitions(info->mtd); | ||
99 | kfree(info->partitions); | ||
100 | } | ||
101 | #endif | ||
102 | del_mtd_device(info->mtd); | ||
103 | map_destroy(info->mtd); | ||
104 | } | ||
105 | |||
106 | /* ensure ram is left read-only */ | ||
107 | |||
108 | platram_setrw(info, PLATRAM_RO); | ||
109 | |||
110 | /* release resources */ | ||
111 | |||
112 | if (info->area) { | ||
113 | release_resource(info->area); | ||
114 | kfree(info->area); | ||
115 | } | ||
116 | |||
117 | if (info->map.virt != NULL) | ||
118 | iounmap(info->map.virt); | ||
119 | |||
120 | kfree(info); | ||
121 | |||
122 | return 0; | ||
123 | } | ||
124 | |||
125 | /* platram_probe | ||
126 | * | ||
127 | * called from device drive system when a device matching our | ||
128 | * driver is found. | ||
129 | */ | ||
130 | |||
131 | static int platram_probe(struct device *dev) | ||
132 | { | ||
133 | struct platform_device *pd = to_platform_device(dev); | ||
134 | struct platdata_mtd_ram *pdata; | ||
135 | struct platram_info *info; | ||
136 | struct resource *res; | ||
137 | int err = 0; | ||
138 | |||
139 | dev_dbg(dev, "probe entered\n"); | ||
140 | |||
141 | if (dev->platform_data == NULL) { | ||
142 | dev_err(dev, "no platform data supplied\n"); | ||
143 | err = -ENOENT; | ||
144 | goto exit_error; | ||
145 | } | ||
146 | |||
147 | pdata = dev->platform_data; | ||
148 | |||
149 | info = kmalloc(sizeof(*info), GFP_KERNEL); | ||
150 | if (info == NULL) { | ||
151 | dev_err(dev, "no memory for flash info\n"); | ||
152 | err = -ENOMEM; | ||
153 | goto exit_error; | ||
154 | } | ||
155 | |||
156 | memset(info, 0, sizeof(*info)); | ||
157 | dev_set_drvdata(dev, info); | ||
158 | |||
159 | info->dev = dev; | ||
160 | info->pdata = pdata; | ||
161 | |||
162 | /* get the resource for the memory mapping */ | ||
163 | |||
164 | res = platform_get_resource(pd, IORESOURCE_MEM, 0); | ||
165 | |||
166 | if (res == NULL) { | ||
167 | dev_err(dev, "no memory resource specified\n"); | ||
168 | err = -ENOENT; | ||
169 | goto exit_free; | ||
170 | } | ||
171 | |||
172 | dev_dbg(dev, "got platform resource %p (0x%lx)\n", res, res->start); | ||
173 | |||
174 | /* setup map parameters */ | ||
175 | |||
176 | info->map.phys = res->start; | ||
177 | info->map.size = (res->end - res->start) + 1; | ||
178 | info->map.name = pdata->mapname != NULL ? pdata->mapname : pd->name; | ||
179 | info->map.bankwidth = pdata->bankwidth; | ||
180 | |||
181 | /* register our usage of the memory area */ | ||
182 | |||
183 | info->area = request_mem_region(res->start, info->map.size, pd->name); | ||
184 | if (info->area == NULL) { | ||
185 | dev_err(dev, "failed to request memory region\n"); | ||
186 | err = -EIO; | ||
187 | goto exit_free; | ||
188 | } | ||
189 | |||
190 | /* remap the memory area */ | ||
191 | |||
192 | info->map.virt = ioremap(res->start, info->map.size); | ||
193 | dev_dbg(dev, "virt %p, %lu bytes\n", info->map.virt, info->map.size); | ||
194 | |||
195 | if (info->map.virt == NULL) { | ||
196 | dev_err(dev, "failed to ioremap() region\n"); | ||
197 | err = -EIO; | ||
198 | goto exit_free; | ||
199 | } | ||
200 | |||
201 | simple_map_init(&info->map); | ||
202 | |||
203 | dev_dbg(dev, "initialised map, probing for mtd\n"); | ||
204 | |||
205 | /* probe for the right mtd map driver */ | ||
206 | |||
207 | info->mtd = do_map_probe("map_ram" , &info->map); | ||
208 | if (info->mtd == NULL) { | ||
209 | dev_err(dev, "failed to probe for map_ram\n"); | ||
210 | err = -ENOMEM; | ||
211 | goto exit_free; | ||
212 | } | ||
213 | |||
214 | info->mtd->owner = THIS_MODULE; | ||
215 | |||
216 | platram_setrw(info, PLATRAM_RW); | ||
217 | |||
218 | /* check to see if there are any available partitions, or wether | ||
219 | * to add this device whole */ | ||
220 | |||
221 | #ifdef CONFIG_MTD_PARTITIONS | ||
222 | if (pdata->nr_partitions > 0) { | ||
223 | const char **probes = { NULL }; | ||
224 | |||
225 | if (pdata->probes) | ||
226 | probes = (const char **)pdata->probes; | ||
227 | |||
228 | err = parse_mtd_partitions(info->mtd, probes, | ||
229 | &info->partitions, 0); | ||
230 | if (err > 0) { | ||
231 | err = add_mtd_partitions(info->mtd, info->partitions, | ||
232 | err); | ||
233 | } | ||
234 | } | ||
235 | #endif /* CONFIG_MTD_PARTITIONS */ | ||
236 | |||
237 | if (add_mtd_device(info->mtd)) { | ||
238 | dev_err(dev, "add_mtd_device() failed\n"); | ||
239 | err = -ENOMEM; | ||
240 | } | ||
241 | |||
242 | dev_info(dev, "registered mtd device\n"); | ||
243 | return err; | ||
244 | |||
245 | exit_free: | ||
246 | platram_remove(dev); | ||
247 | exit_error: | ||
248 | return err; | ||
249 | } | ||
250 | |||
251 | /* device driver info */ | ||
252 | |||
253 | static struct device_driver platram_driver = { | ||
254 | .name = "mtd-ram", | ||
255 | .bus = &platform_bus_type, | ||
256 | .probe = platram_probe, | ||
257 | .remove = platram_remove, | ||
258 | }; | ||
259 | |||
260 | /* module init/exit */ | ||
261 | |||
262 | static int __init platram_init(void) | ||
263 | { | ||
264 | printk("Generic platform RAM MTD, (c) 2004 Simtec Electronics\n"); | ||
265 | return driver_register(&platram_driver); | ||
266 | } | ||
267 | |||
268 | static void __exit platram_exit(void) | ||
269 | { | ||
270 | driver_unregister(&platram_driver); | ||
271 | } | ||
272 | |||
273 | module_init(platram_init); | ||
274 | module_exit(platram_exit); | ||
275 | |||
276 | MODULE_LICENSE("GPL"); | ||
277 | MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); | ||
278 | MODULE_DESCRIPTION("MTD platform RAM map driver"); | ||
diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c index 5bb3b600e5d0..97a8dfd69258 100644 --- a/drivers/mtd/maps/scb2_flash.c +++ b/drivers/mtd/maps/scb2_flash.c | |||
@@ -1,6 +1,6 @@ | |||
1 | /* | 1 | /* |
2 | * MTD map driver for BIOS Flash on Intel SCB2 boards | 2 | * MTD map driver for BIOS Flash on Intel SCB2 boards |
3 | * $Id: scb2_flash.c,v 1.11 2004/11/28 09:40:40 dwmw2 Exp $ | 3 | * $Id: scb2_flash.c,v 1.12 2005/03/18 14:04:35 gleixner Exp $ |
4 | * Copyright (C) 2002 Sun Microsystems, Inc. | 4 | * Copyright (C) 2002 Sun Microsystems, Inc. |
5 | * Tim Hockin <thockin@sun.com> | 5 | * Tim Hockin <thockin@sun.com> |
6 | * | 6 | * |
@@ -238,7 +238,7 @@ static struct pci_driver scb2_flash_driver = { | |||
238 | static int __init | 238 | static int __init |
239 | scb2_flash_init(void) | 239 | scb2_flash_init(void) |
240 | { | 240 | { |
241 | return pci_module_init(&scb2_flash_driver); | 241 | return pci_register_driver(&scb2_flash_driver); |
242 | } | 242 | } |
243 | 243 | ||
244 | static void __exit | 244 | static void __exit |
diff --git a/drivers/mtd/maps/sharpsl-flash.c b/drivers/mtd/maps/sharpsl-flash.c index b3b39cb7c608..d15da6fd84c1 100644 --- a/drivers/mtd/maps/sharpsl-flash.c +++ b/drivers/mtd/maps/sharpsl-flash.c | |||
@@ -4,7 +4,7 @@ | |||
4 | * Copyright (C) 2001 Lineo Japan, Inc. | 4 | * Copyright (C) 2001 Lineo Japan, Inc. |
5 | * Copyright (C) 2002 SHARP | 5 | * Copyright (C) 2002 SHARP |
6 | * | 6 | * |
7 | * $Id: sharpsl-flash.c,v 1.2 2004/11/24 20:38:06 rpurdie Exp $ | 7 | * $Id: sharpsl-flash.c,v 1.5 2005/03/21 08:42:11 rpurdie Exp $ |
8 | * | 8 | * |
9 | * based on rpxlite.c,v 1.15 2001/10/02 15:05:14 dwmw2 Exp | 9 | * based on rpxlite.c,v 1.15 2001/10/02 15:05:14 dwmw2 Exp |
10 | * Handle mapping of the flash on the RPX Lite and CLLF boards | 10 | * Handle mapping of the flash on the RPX Lite and CLLF boards |
@@ -24,13 +24,14 @@ | |||
24 | #include <linux/module.h> | 24 | #include <linux/module.h> |
25 | #include <linux/types.h> | 25 | #include <linux/types.h> |
26 | #include <linux/kernel.h> | 26 | #include <linux/kernel.h> |
27 | #include <asm/io.h> | ||
28 | #include <linux/mtd/mtd.h> | 27 | #include <linux/mtd/mtd.h> |
29 | #include <linux/mtd/map.h> | 28 | #include <linux/mtd/map.h> |
30 | #include <linux/mtd/partitions.h> | 29 | #include <linux/mtd/partitions.h> |
30 | #include <asm/io.h> | ||
31 | #include <asm/mach-types.h> | ||
31 | 32 | ||
32 | #define WINDOW_ADDR 0x00000000 | 33 | #define WINDOW_ADDR 0x00000000 |
33 | #define WINDOW_SIZE 0x01000000 | 34 | #define WINDOW_SIZE 0x00800000 |
34 | #define BANK_WIDTH 2 | 35 | #define BANK_WIDTH 2 |
35 | 36 | ||
36 | static struct mtd_info *mymtd; | 37 | static struct mtd_info *mymtd; |
@@ -44,9 +45,7 @@ struct map_info sharpsl_map = { | |||
44 | 45 | ||
45 | static struct mtd_partition sharpsl_partitions[1] = { | 46 | static struct mtd_partition sharpsl_partitions[1] = { |
46 | { | 47 | { |
47 | name: "Filesystem", | 48 | name: "Boot PROM Filesystem", |
48 | size: 0x006d0000, | ||
49 | offset: 0x00120000 | ||
50 | } | 49 | } |
51 | }; | 50 | }; |
52 | 51 | ||
@@ -58,12 +57,16 @@ int __init init_sharpsl(void) | |||
58 | int nb_parts = 0; | 57 | int nb_parts = 0; |
59 | char *part_type = "static"; | 58 | char *part_type = "static"; |
60 | 59 | ||
61 | printk(KERN_NOTICE "Sharp SL series flash device: %x at %x\n", WINDOW_SIZE, WINDOW_ADDR); | 60 | printk(KERN_NOTICE "Sharp SL series flash device: %x at %x\n", |
61 | WINDOW_SIZE, WINDOW_ADDR); | ||
62 | sharpsl_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE); | 62 | sharpsl_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE); |
63 | if (!sharpsl_map.virt) { | 63 | if (!sharpsl_map.virt) { |
64 | printk("Failed to ioremap\n"); | 64 | printk("Failed to ioremap\n"); |
65 | return -EIO; | 65 | return -EIO; |
66 | } | 66 | } |
67 | |||
68 | simple_map_init(&sharpsl_map); | ||
69 | |||
67 | mymtd = do_map_probe("map_rom", &sharpsl_map); | 70 | mymtd = do_map_probe("map_rom", &sharpsl_map); |
68 | if (!mymtd) { | 71 | if (!mymtd) { |
69 | iounmap(sharpsl_map.virt); | 72 | iounmap(sharpsl_map.virt); |
@@ -72,6 +75,22 @@ int __init init_sharpsl(void) | |||
72 | 75 | ||
73 | mymtd->owner = THIS_MODULE; | 76 | mymtd->owner = THIS_MODULE; |
74 | 77 | ||
78 | if (machine_is_corgi() || machine_is_shepherd() || machine_is_husky() | ||
79 | || machine_is_poodle()) { | ||
80 | sharpsl_partitions[0].size=0x006d0000; | ||
81 | sharpsl_partitions[0].offset=0x00120000; | ||
82 | } else if (machine_is_tosa()) { | ||
83 | sharpsl_partitions[0].size=0x006a0000; | ||
84 | sharpsl_partitions[0].offset=0x00160000; | ||
85 | } else if (machine_is_spitz()) { | ||
86 | sharpsl_partitions[0].size=0x006b0000; | ||
87 | sharpsl_partitions[0].offset=0x00140000; | ||
88 | } else { | ||
89 | map_destroy(mymtd); | ||
90 | iounmap(sharpsl_map.virt); | ||
91 | return -ENODEV; | ||
92 | } | ||
93 | |||
75 | parts = sharpsl_partitions; | 94 | parts = sharpsl_partitions; |
76 | nb_parts = NB_OF(sharpsl_partitions); | 95 | nb_parts = NB_OF(sharpsl_partitions); |
77 | 96 | ||
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 510ad78312cc..1ed602a0f24c 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c | |||
@@ -1,5 +1,5 @@ | |||
1 | /* | 1 | /* |
2 | * $Id: mtdchar.c,v 1.66 2005/01/05 18:05:11 dwmw2 Exp $ | 2 | * $Id: mtdchar.c,v 1.73 2005/07/04 17:36:41 gleixner Exp $ |
3 | * | 3 | * |
4 | * Character-device access to raw MTD devices. | 4 | * Character-device access to raw MTD devices. |
5 | * | 5 | * |
@@ -15,27 +15,30 @@ | |||
15 | #include <linux/fs.h> | 15 | #include <linux/fs.h> |
16 | #include <asm/uaccess.h> | 16 | #include <asm/uaccess.h> |
17 | 17 | ||
18 | #ifdef CONFIG_DEVFS_FS | 18 | #include <linux/device.h> |
19 | #include <linux/devfs_fs_kernel.h> | 19 | |
20 | static struct class *mtd_class; | ||
20 | 21 | ||
21 | static void mtd_notify_add(struct mtd_info* mtd) | 22 | static void mtd_notify_add(struct mtd_info* mtd) |
22 | { | 23 | { |
23 | if (!mtd) | 24 | if (!mtd) |
24 | return; | 25 | return; |
25 | 26 | ||
26 | devfs_mk_cdev(MKDEV(MTD_CHAR_MAJOR, mtd->index*2), | 27 | class_device_create(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2), |
27 | S_IFCHR | S_IRUGO | S_IWUGO, "mtd/%d", mtd->index); | 28 | NULL, "mtd%d", mtd->index); |
28 | 29 | ||
29 | devfs_mk_cdev(MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1), | 30 | class_device_create(mtd_class, |
30 | S_IFCHR | S_IRUGO, "mtd/%dro", mtd->index); | 31 | MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1), |
32 | NULL, "mtd%dro", mtd->index); | ||
31 | } | 33 | } |
32 | 34 | ||
33 | static void mtd_notify_remove(struct mtd_info* mtd) | 35 | static void mtd_notify_remove(struct mtd_info* mtd) |
34 | { | 36 | { |
35 | if (!mtd) | 37 | if (!mtd) |
36 | return; | 38 | return; |
37 | devfs_remove("mtd/%d", mtd->index); | 39 | |
38 | devfs_remove("mtd/%dro", mtd->index); | 40 | class_device_destroy(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2)); |
41 | class_device_destroy(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1)); | ||
39 | } | 42 | } |
40 | 43 | ||
41 | static struct mtd_notifier notifier = { | 44 | static struct mtd_notifier notifier = { |
@@ -43,25 +46,25 @@ static struct mtd_notifier notifier = { | |||
43 | .remove = mtd_notify_remove, | 46 | .remove = mtd_notify_remove, |
44 | }; | 47 | }; |
45 | 48 | ||
46 | static inline void mtdchar_devfs_init(void) | 49 | /* |
47 | { | 50 | * We use file->private_data to store a pointer to the MTDdevice. |
48 | devfs_mk_dir("mtd"); | 51 | * Since alighment is at least 32 bits, we have 2 bits free for OTP |
49 | register_mtd_user(¬ifier); | 52 | * modes as well. |
50 | } | 53 | */ |
51 | 54 | ||
52 | static inline void mtdchar_devfs_exit(void) | 55 | #define TO_MTD(file) (struct mtd_info *)((long)((file)->private_data) & ~3L) |
53 | { | 56 | |
54 | unregister_mtd_user(¬ifier); | 57 | #define MTD_MODE_OTP_FACT 1 |
55 | devfs_remove("mtd"); | 58 | #define MTD_MODE_OTP_USER 2 |
56 | } | 59 | #define MTD_MODE(file) ((long)((file)->private_data) & 3) |
57 | #else /* !DEVFS */ | 60 | |
58 | #define mtdchar_devfs_init() do { } while(0) | 61 | #define SET_MTD_MODE(file, mode) \ |
59 | #define mtdchar_devfs_exit() do { } while(0) | 62 | do { long __p = (long)((file)->private_data); \ |
60 | #endif | 63 | (file)->private_data = (void *)((__p & ~3L) | mode); } while (0) |
61 | 64 | ||
62 | static loff_t mtd_lseek (struct file *file, loff_t offset, int orig) | 65 | static loff_t mtd_lseek (struct file *file, loff_t offset, int orig) |
63 | { | 66 | { |
64 | struct mtd_info *mtd = file->private_data; | 67 | struct mtd_info *mtd = TO_MTD(file); |
65 | 68 | ||
66 | switch (orig) { | 69 | switch (orig) { |
67 | case 0: | 70 | case 0: |
@@ -134,7 +137,7 @@ static int mtd_close(struct inode *inode, struct file *file) | |||
134 | 137 | ||
135 | DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n"); | 138 | DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n"); |
136 | 139 | ||
137 | mtd = file->private_data; | 140 | mtd = TO_MTD(file); |
138 | 141 | ||
139 | if (mtd->sync) | 142 | if (mtd->sync) |
140 | mtd->sync(mtd); | 143 | mtd->sync(mtd); |
@@ -151,7 +154,7 @@ static int mtd_close(struct inode *inode, struct file *file) | |||
151 | 154 | ||
152 | static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t *ppos) | 155 | static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t *ppos) |
153 | { | 156 | { |
154 | struct mtd_info *mtd = file->private_data; | 157 | struct mtd_info *mtd = TO_MTD(file); |
155 | size_t retlen=0; | 158 | size_t retlen=0; |
156 | size_t total_retlen=0; | 159 | size_t total_retlen=0; |
157 | int ret=0; | 160 | int ret=0; |
@@ -178,7 +181,16 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t | |||
178 | if (!kbuf) | 181 | if (!kbuf) |
179 | return -ENOMEM; | 182 | return -ENOMEM; |
180 | 183 | ||
181 | ret = MTD_READ(mtd, *ppos, len, &retlen, kbuf); | 184 | switch (MTD_MODE(file)) { |
185 | case MTD_MODE_OTP_FACT: | ||
186 | ret = mtd->read_fact_prot_reg(mtd, *ppos, len, &retlen, kbuf); | ||
187 | break; | ||
188 | case MTD_MODE_OTP_USER: | ||
189 | ret = mtd->read_user_prot_reg(mtd, *ppos, len, &retlen, kbuf); | ||
190 | break; | ||
191 | default: | ||
192 | ret = MTD_READ(mtd, *ppos, len, &retlen, kbuf); | ||
193 | } | ||
182 | /* Nand returns -EBADMSG on ecc errors, but it returns | 194 | /* Nand returns -EBADMSG on ecc errors, but it returns |
183 | * the data. For our userspace tools it is important | 195 | * the data. For our userspace tools it is important |
184 | * to dump areas with ecc errors ! | 196 | * to dump areas with ecc errors ! |
@@ -196,6 +208,8 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t | |||
196 | 208 | ||
197 | count -= retlen; | 209 | count -= retlen; |
198 | buf += retlen; | 210 | buf += retlen; |
211 | if (retlen == 0) | ||
212 | count = 0; | ||
199 | } | 213 | } |
200 | else { | 214 | else { |
201 | kfree(kbuf); | 215 | kfree(kbuf); |
@@ -210,7 +224,7 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t | |||
210 | 224 | ||
211 | static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count,loff_t *ppos) | 225 | static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count,loff_t *ppos) |
212 | { | 226 | { |
213 | struct mtd_info *mtd = file->private_data; | 227 | struct mtd_info *mtd = TO_MTD(file); |
214 | char *kbuf; | 228 | char *kbuf; |
215 | size_t retlen; | 229 | size_t retlen; |
216 | size_t total_retlen=0; | 230 | size_t total_retlen=0; |
@@ -245,7 +259,20 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count | |||
245 | return -EFAULT; | 259 | return -EFAULT; |
246 | } | 260 | } |
247 | 261 | ||
248 | ret = (*(mtd->write))(mtd, *ppos, len, &retlen, kbuf); | 262 | switch (MTD_MODE(file)) { |
263 | case MTD_MODE_OTP_FACT: | ||
264 | ret = -EROFS; | ||
265 | break; | ||
266 | case MTD_MODE_OTP_USER: | ||
267 | if (!mtd->write_user_prot_reg) { | ||
268 | ret = -EOPNOTSUPP; | ||
269 | break; | ||
270 | } | ||
271 | ret = mtd->write_user_prot_reg(mtd, *ppos, len, &retlen, kbuf); | ||
272 | break; | ||
273 | default: | ||
274 | ret = (*(mtd->write))(mtd, *ppos, len, &retlen, kbuf); | ||
275 | } | ||
249 | if (!ret) { | 276 | if (!ret) { |
250 | *ppos += retlen; | 277 | *ppos += retlen; |
251 | total_retlen += retlen; | 278 | total_retlen += retlen; |
@@ -276,7 +303,7 @@ static void mtdchar_erase_callback (struct erase_info *instr) | |||
276 | static int mtd_ioctl(struct inode *inode, struct file *file, | 303 | static int mtd_ioctl(struct inode *inode, struct file *file, |
277 | u_int cmd, u_long arg) | 304 | u_int cmd, u_long arg) |
278 | { | 305 | { |
279 | struct mtd_info *mtd = file->private_data; | 306 | struct mtd_info *mtd = TO_MTD(file); |
280 | void __user *argp = (void __user *)arg; | 307 | void __user *argp = (void __user *)arg; |
281 | int ret = 0; | 308 | int ret = 0; |
282 | u_long size; | 309 | u_long size; |
@@ -518,6 +545,80 @@ static int mtd_ioctl(struct inode *inode, struct file *file, | |||
518 | break; | 545 | break; |
519 | } | 546 | } |
520 | 547 | ||
548 | #ifdef CONFIG_MTD_OTP | ||
549 | case OTPSELECT: | ||
550 | { | ||
551 | int mode; | ||
552 | if (copy_from_user(&mode, argp, sizeof(int))) | ||
553 | return -EFAULT; | ||
554 | SET_MTD_MODE(file, 0); | ||
555 | switch (mode) { | ||
556 | case MTD_OTP_FACTORY: | ||
557 | if (!mtd->read_fact_prot_reg) | ||
558 | ret = -EOPNOTSUPP; | ||
559 | else | ||
560 | SET_MTD_MODE(file, MTD_MODE_OTP_FACT); | ||
561 | break; | ||
562 | case MTD_OTP_USER: | ||
563 | if (!mtd->read_fact_prot_reg) | ||
564 | ret = -EOPNOTSUPP; | ||
565 | else | ||
566 | SET_MTD_MODE(file, MTD_MODE_OTP_USER); | ||
567 | break; | ||
568 | default: | ||
569 | ret = -EINVAL; | ||
570 | case MTD_OTP_OFF: | ||
571 | break; | ||
572 | } | ||
573 | file->f_pos = 0; | ||
574 | break; | ||
575 | } | ||
576 | |||
577 | case OTPGETREGIONCOUNT: | ||
578 | case OTPGETREGIONINFO: | ||
579 | { | ||
580 | struct otp_info *buf = kmalloc(4096, GFP_KERNEL); | ||
581 | if (!buf) | ||
582 | return -ENOMEM; | ||
583 | ret = -EOPNOTSUPP; | ||
584 | switch (MTD_MODE(file)) { | ||
585 | case MTD_MODE_OTP_FACT: | ||
586 | if (mtd->get_fact_prot_info) | ||
587 | ret = mtd->get_fact_prot_info(mtd, buf, 4096); | ||
588 | break; | ||
589 | case MTD_MODE_OTP_USER: | ||
590 | if (mtd->get_user_prot_info) | ||
591 | ret = mtd->get_user_prot_info(mtd, buf, 4096); | ||
592 | break; | ||
593 | } | ||
594 | if (ret >= 0) { | ||
595 | if (cmd == OTPGETREGIONCOUNT) { | ||
596 | int nbr = ret / sizeof(struct otp_info); | ||
597 | ret = copy_to_user(argp, &nbr, sizeof(int)); | ||
598 | } else | ||
599 | ret = copy_to_user(argp, buf, ret); | ||
600 | if (ret) | ||
601 | ret = -EFAULT; | ||
602 | } | ||
603 | kfree(buf); | ||
604 | break; | ||
605 | } | ||
606 | |||
607 | case OTPLOCK: | ||
608 | { | ||
609 | struct otp_info info; | ||
610 | |||
611 | if (MTD_MODE(file) != MTD_MODE_OTP_USER) | ||
612 | return -EINVAL; | ||
613 | if (copy_from_user(&info, argp, sizeof(info))) | ||
614 | return -EFAULT; | ||
615 | if (!mtd->lock_user_prot_reg) | ||
616 | return -EOPNOTSUPP; | ||
617 | ret = mtd->lock_user_prot_reg(mtd, info.start, info.length); | ||
618 | break; | ||
619 | } | ||
620 | #endif | ||
621 | |||
521 | default: | 622 | default: |
522 | ret = -ENOTTY; | 623 | ret = -ENOTTY; |
523 | } | 624 | } |
@@ -543,13 +644,22 @@ static int __init init_mtdchar(void) | |||
543 | return -EAGAIN; | 644 | return -EAGAIN; |
544 | } | 645 | } |
545 | 646 | ||
546 | mtdchar_devfs_init(); | 647 | mtd_class = class_create(THIS_MODULE, "mtd"); |
648 | |||
649 | if (IS_ERR(mtd_class)) { | ||
650 | printk(KERN_ERR "Error creating mtd class.\n"); | ||
651 | unregister_chrdev(MTD_CHAR_MAJOR, "mtd"); | ||
652 | return PTR_ERR(mtd_class); | ||
653 | } | ||
654 | |||
655 | register_mtd_user(¬ifier); | ||
547 | return 0; | 656 | return 0; |
548 | } | 657 | } |
549 | 658 | ||
550 | static void __exit cleanup_mtdchar(void) | 659 | static void __exit cleanup_mtdchar(void) |
551 | { | 660 | { |
552 | mtdchar_devfs_exit(); | 661 | unregister_mtd_user(¬ifier); |
662 | class_destroy(mtd_class); | ||
553 | unregister_chrdev(MTD_CHAR_MAJOR, "mtd"); | 663 | unregister_chrdev(MTD_CHAR_MAJOR, "mtd"); |
554 | } | 664 | } |
555 | 665 | ||
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 9c0315d1b1c4..dc86df18e94b 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c | |||
@@ -1,5 +1,5 @@ | |||
1 | /* | 1 | /* |
2 | * $Id: mtdcore.c,v 1.44 2004/11/16 18:28:59 dwmw2 Exp $ | 2 | * $Id: mtdcore.c,v 1.45 2005/02/18 14:34:50 dedekind Exp $ |
3 | * | 3 | * |
4 | * Core registration and callback routines for MTD | 4 | * Core registration and callback routines for MTD |
5 | * drivers and users. | 5 | * drivers and users. |
@@ -149,8 +149,8 @@ void register_mtd_user (struct mtd_notifier *new) | |||
149 | } | 149 | } |
150 | 150 | ||
151 | /** | 151 | /** |
152 | * register_mtd_user - unregister a 'user' of MTD devices. | 152 | * unregister_mtd_user - unregister a 'user' of MTD devices. |
153 | * @new: pointer to notifier info structure | 153 | * @old: pointer to notifier info structure |
154 | * | 154 | * |
155 | * Removes a callback function pair from the list of 'users' to be | 155 | * Removes a callback function pair from the list of 'users' to be |
156 | * notified upon addition or removal of MTD devices. Causes the | 156 | * notified upon addition or removal of MTD devices. Causes the |
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 96ebb52f24b1..b92e6bfffaf2 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c | |||
@@ -5,7 +5,7 @@ | |||
5 | * | 5 | * |
6 | * This code is GPL | 6 | * This code is GPL |
7 | * | 7 | * |
8 | * $Id: mtdpart.c,v 1.51 2004/11/16 18:28:59 dwmw2 Exp $ | 8 | * $Id: mtdpart.c,v 1.53 2005/02/08 17:11:13 nico Exp $ |
9 | * | 9 | * |
10 | * 02-21-2002 Thomas Gleixner <gleixner@autronix.de> | 10 | * 02-21-2002 Thomas Gleixner <gleixner@autronix.de> |
11 | * added support for read_oob, write_oob | 11 | * added support for read_oob, write_oob |
@@ -116,6 +116,13 @@ static int part_read_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t le | |||
116 | len, retlen, buf); | 116 | len, retlen, buf); |
117 | } | 117 | } |
118 | 118 | ||
119 | static int part_get_user_prot_info (struct mtd_info *mtd, | ||
120 | struct otp_info *buf, size_t len) | ||
121 | { | ||
122 | struct mtd_part *part = PART(mtd); | ||
123 | return part->master->get_user_prot_info (part->master, buf, len); | ||
124 | } | ||
125 | |||
119 | static int part_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, | 126 | static int part_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, |
120 | size_t *retlen, u_char *buf) | 127 | size_t *retlen, u_char *buf) |
121 | { | 128 | { |
@@ -124,6 +131,13 @@ static int part_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t le | |||
124 | len, retlen, buf); | 131 | len, retlen, buf); |
125 | } | 132 | } |
126 | 133 | ||
134 | static int part_get_fact_prot_info (struct mtd_info *mtd, | ||
135 | struct otp_info *buf, size_t len) | ||
136 | { | ||
137 | struct mtd_part *part = PART(mtd); | ||
138 | return part->master->get_fact_prot_info (part->master, buf, len); | ||
139 | } | ||
140 | |||
127 | static int part_write (struct mtd_info *mtd, loff_t to, size_t len, | 141 | static int part_write (struct mtd_info *mtd, loff_t to, size_t len, |
128 | size_t *retlen, const u_char *buf) | 142 | size_t *retlen, const u_char *buf) |
129 | { | 143 | { |
@@ -182,6 +196,12 @@ static int part_write_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t l | |||
182 | len, retlen, buf); | 196 | len, retlen, buf); |
183 | } | 197 | } |
184 | 198 | ||
199 | static int part_lock_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len) | ||
200 | { | ||
201 | struct mtd_part *part = PART(mtd); | ||
202 | return part->master->lock_user_prot_reg (part->master, from, len); | ||
203 | } | ||
204 | |||
185 | static int part_writev (struct mtd_info *mtd, const struct kvec *vecs, | 205 | static int part_writev (struct mtd_info *mtd, const struct kvec *vecs, |
186 | unsigned long count, loff_t to, size_t *retlen) | 206 | unsigned long count, loff_t to, size_t *retlen) |
187 | { | 207 | { |
@@ -409,6 +429,12 @@ int add_mtd_partitions(struct mtd_info *master, | |||
409 | slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg; | 429 | slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg; |
410 | if(master->write_user_prot_reg) | 430 | if(master->write_user_prot_reg) |
411 | slave->mtd.write_user_prot_reg = part_write_user_prot_reg; | 431 | slave->mtd.write_user_prot_reg = part_write_user_prot_reg; |
432 | if(master->lock_user_prot_reg) | ||
433 | slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg; | ||
434 | if(master->get_user_prot_info) | ||
435 | slave->mtd.get_user_prot_info = part_get_user_prot_info; | ||
436 | if(master->get_fact_prot_info) | ||
437 | slave->mtd.get_fact_prot_info = part_get_fact_prot_info; | ||
412 | if (master->sync) | 438 | if (master->sync) |
413 | slave->mtd.sync = part_sync; | 439 | slave->mtd.sync = part_sync; |
414 | if (!i && master->suspend && master->resume) { | 440 | if (!i && master->suspend && master->resume) { |
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index f7801eb730ce..36d34e5e5a5a 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig | |||
@@ -1,5 +1,5 @@ | |||
1 | # drivers/mtd/nand/Kconfig | 1 | # drivers/mtd/nand/Kconfig |
2 | # $Id: Kconfig,v 1.26 2005/01/05 12:42:24 dwmw2 Exp $ | 2 | # $Id: Kconfig,v 1.31 2005/06/20 12:03:21 bjd Exp $ |
3 | 3 | ||
4 | menu "NAND Flash Device Drivers" | 4 | menu "NAND Flash Device Drivers" |
5 | depends on MTD!=n | 5 | depends on MTD!=n |
@@ -58,20 +58,6 @@ config MTD_NAND_TOTO | |||
58 | config MTD_NAND_IDS | 58 | config MTD_NAND_IDS |
59 | tristate | 59 | tristate |
60 | 60 | ||
61 | config MTD_NAND_TX4925NDFMC | ||
62 | tristate "SmartMedia Card on Toshiba RBTX4925 reference board" | ||
63 | depends on TOSHIBA_RBTX4925 && MTD_NAND && TOSHIBA_RBTX4925_MPLEX_NAND | ||
64 | help | ||
65 | This enables the driver for the NAND flash device found on the | ||
66 | Toshiba RBTX4925 reference board, which is a SmartMediaCard. | ||
67 | |||
68 | config MTD_NAND_TX4938NDFMC | ||
69 | tristate "NAND Flash device on Toshiba RBTX4938 reference board" | ||
70 | depends on TOSHIBA_RBTX4938 && MTD_NAND && TOSHIBA_RBTX4938_MPLEX_NAND | ||
71 | help | ||
72 | This enables the driver for the NAND flash device found on the | ||
73 | Toshiba RBTX4938 reference board. | ||
74 | |||
75 | config MTD_NAND_AU1550 | 61 | config MTD_NAND_AU1550 |
76 | tristate "Au1550 NAND support" | 62 | tristate "Au1550 NAND support" |
77 | depends on SOC_AU1550 && MTD_NAND | 63 | depends on SOC_AU1550 && MTD_NAND |
@@ -95,10 +81,11 @@ config MTD_NAND_PPCHAMELEONEVB | |||
95 | This enables the NAND flash driver on the PPChameleon EVB Board. | 81 | This enables the NAND flash driver on the PPChameleon EVB Board. |
96 | 82 | ||
97 | config MTD_NAND_S3C2410 | 83 | config MTD_NAND_S3C2410 |
98 | tristate "NAND Flash support for S3C2410 SoC" | 84 | tristate "NAND Flash support for S3C2410/S3C2440 SoC" |
99 | depends on ARCH_S3C2410 && MTD_NAND | 85 | depends on ARCH_S3C2410 && MTD_NAND |
100 | help | 86 | help |
101 | This enables the NAND flash controller on the S3C2410. | 87 | This enables the NAND flash controller on the S3C2410 and S3C2440 |
88 | SoCs | ||
102 | 89 | ||
103 | No board specfic support is done by this driver, each board | 90 | No board specfic support is done by this driver, each board |
104 | must advertise a platform_device for the driver to attach. | 91 | must advertise a platform_device for the driver to attach. |
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index d9dc8cc2da8c..41742026a52e 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile | |||
@@ -10,8 +10,6 @@ obj-$(CONFIG_MTD_NAND_SPIA) += spia.o | |||
10 | obj-$(CONFIG_MTD_NAND_TOTO) += toto.o | 10 | obj-$(CONFIG_MTD_NAND_TOTO) += toto.o |
11 | obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o | 11 | obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o |
12 | obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o | 12 | obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o |
13 | obj-$(CONFIG_MTD_NAND_TX4925NDFMC) += tx4925ndfmc.o | ||
14 | obj-$(CONFIG_MTD_NAND_TX4938NDFMC) += tx4938ndfmc.o | ||
15 | obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o | 13 | obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o |
16 | obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o | 14 | obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o |
17 | obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o | 15 | obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o |
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index 02135c3ac29a..fdb5d4ad3d52 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c | |||
@@ -16,7 +16,7 @@ | |||
16 | * | 16 | * |
17 | * Interface to generic NAND code for M-Systems DiskOnChip devices | 17 | * Interface to generic NAND code for M-Systems DiskOnChip devices |
18 | * | 18 | * |
19 | * $Id: diskonchip.c,v 1.45 2005/01/05 18:05:14 dwmw2 Exp $ | 19 | * $Id: diskonchip.c,v 1.54 2005/04/07 14:22:55 dbrown Exp $ |
20 | */ | 20 | */ |
21 | 21 | ||
22 | #include <linux/kernel.h> | 22 | #include <linux/kernel.h> |
@@ -35,13 +35,13 @@ | |||
35 | #include <linux/mtd/inftl.h> | 35 | #include <linux/mtd/inftl.h> |
36 | 36 | ||
37 | /* Where to look for the devices? */ | 37 | /* Where to look for the devices? */ |
38 | #ifndef CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS | 38 | #ifndef CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS |
39 | #define CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS 0 | 39 | #define CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS 0 |
40 | #endif | 40 | #endif |
41 | 41 | ||
42 | static unsigned long __initdata doc_locations[] = { | 42 | static unsigned long __initdata doc_locations[] = { |
43 | #if defined (__alpha__) || defined(__i386__) || defined(__x86_64__) | 43 | #if defined (__alpha__) || defined(__i386__) || defined(__x86_64__) |
44 | #ifdef CONFIG_MTD_DISKONCHIP_PROBE_HIGH | 44 | #ifdef CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH |
45 | 0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000, | 45 | 0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000, |
46 | 0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000, | 46 | 0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000, |
47 | 0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000, | 47 | 0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000, |
@@ -81,11 +81,6 @@ struct doc_priv { | |||
81 | struct mtd_info *nextdoc; | 81 | struct mtd_info *nextdoc; |
82 | }; | 82 | }; |
83 | 83 | ||
84 | /* Max number of eraseblocks to scan (from start of device) for the (I)NFTL | ||
85 | MediaHeader. The spec says to just keep going, I think, but that's just | ||
86 | silly. */ | ||
87 | #define MAX_MEDIAHEADER_SCAN 8 | ||
88 | |||
89 | /* This is the syndrome computed by the HW ecc generator upon reading an empty | 84 | /* This is the syndrome computed by the HW ecc generator upon reading an empty |
90 | page, one with all 0xff for data and stored ecc code. */ | 85 | page, one with all 0xff for data and stored ecc code. */ |
91 | static u_char empty_read_syndrome[6] = { 0x26, 0xff, 0x6d, 0x47, 0x73, 0x7a }; | 86 | static u_char empty_read_syndrome[6] = { 0x26, 0xff, 0x6d, 0x47, 0x73, 0x7a }; |
@@ -111,10 +106,11 @@ module_param(try_dword, int, 0); | |||
111 | static int no_ecc_failures=0; | 106 | static int no_ecc_failures=0; |
112 | module_param(no_ecc_failures, int, 0); | 107 | module_param(no_ecc_failures, int, 0); |
113 | 108 | ||
114 | #ifdef CONFIG_MTD_PARTITIONS | ||
115 | static int no_autopart=0; | 109 | static int no_autopart=0; |
116 | module_param(no_autopart, int, 0); | 110 | module_param(no_autopart, int, 0); |
117 | #endif | 111 | |
112 | static int show_firmware_partition=0; | ||
113 | module_param(show_firmware_partition, int, 0); | ||
118 | 114 | ||
119 | #ifdef MTD_NAND_DISKONCHIP_BBTWRITE | 115 | #ifdef MTD_NAND_DISKONCHIP_BBTWRITE |
120 | static int inftl_bbt_write=1; | 116 | static int inftl_bbt_write=1; |
@@ -123,7 +119,7 @@ static int inftl_bbt_write=0; | |||
123 | #endif | 119 | #endif |
124 | module_param(inftl_bbt_write, int, 0); | 120 | module_param(inftl_bbt_write, int, 0); |
125 | 121 | ||
126 | static unsigned long doc_config_location = CONFIG_MTD_DISKONCHIP_PROBE_ADDRESS; | 122 | static unsigned long doc_config_location = CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS; |
127 | module_param(doc_config_location, ulong, 0); | 123 | module_param(doc_config_location, ulong, 0); |
128 | MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip"); | 124 | MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip"); |
129 | 125 | ||
@@ -410,7 +406,12 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr) | |||
410 | doc200x_hwcontrol(mtd, NAND_CTL_SETALE); | 406 | doc200x_hwcontrol(mtd, NAND_CTL_SETALE); |
411 | this->write_byte(mtd, 0); | 407 | this->write_byte(mtd, 0); |
412 | doc200x_hwcontrol(mtd, NAND_CTL_CLRALE); | 408 | doc200x_hwcontrol(mtd, NAND_CTL_CLRALE); |
413 | 409 | ||
410 | /* We cant' use dev_ready here, but at least we wait for the | ||
411 | * command to complete | ||
412 | */ | ||
413 | udelay(50); | ||
414 | |||
414 | ret = this->read_byte(mtd) << 8; | 415 | ret = this->read_byte(mtd) << 8; |
415 | ret |= this->read_byte(mtd); | 416 | ret |= this->read_byte(mtd); |
416 | 417 | ||
@@ -429,6 +430,8 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr) | |||
429 | doc2000_write_byte(mtd, 0); | 430 | doc2000_write_byte(mtd, 0); |
430 | doc200x_hwcontrol(mtd, NAND_CTL_CLRALE); | 431 | doc200x_hwcontrol(mtd, NAND_CTL_CLRALE); |
431 | 432 | ||
433 | udelay(50); | ||
434 | |||
432 | ident.dword = readl(docptr + DoC_2k_CDSN_IO); | 435 | ident.dword = readl(docptr + DoC_2k_CDSN_IO); |
433 | if (((ident.byte[0] << 8) | ident.byte[1]) == ret) { | 436 | if (((ident.byte[0] << 8) | ident.byte[1]) == ret) { |
434 | printk(KERN_INFO "DiskOnChip 2000 responds to DWORD access\n"); | 437 | printk(KERN_INFO "DiskOnChip 2000 responds to DWORD access\n"); |
@@ -1046,11 +1049,21 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ | |||
1046 | 1049 | ||
1047 | //u_char mydatabuf[528]; | 1050 | //u_char mydatabuf[528]; |
1048 | 1051 | ||
1052 | /* The strange out-of-order .oobfree list below is a (possibly unneeded) | ||
1053 | * attempt to retain compatibility. It used to read: | ||
1054 | * .oobfree = { {8, 8} } | ||
1055 | * Since that leaves two bytes unusable, it was changed. But the following | ||
1056 | * scheme might affect existing jffs2 installs by moving the cleanmarker: | ||
1057 | * .oobfree = { {6, 10} } | ||
1058 | * jffs2 seems to handle the above gracefully, but the current scheme seems | ||
1059 | * safer. The only problem with it is that any code that parses oobfree must | ||
1060 | * be able to handle out-of-order segments. | ||
1061 | */ | ||
1049 | static struct nand_oobinfo doc200x_oobinfo = { | 1062 | static struct nand_oobinfo doc200x_oobinfo = { |
1050 | .useecc = MTD_NANDECC_AUTOPLACE, | 1063 | .useecc = MTD_NANDECC_AUTOPLACE, |
1051 | .eccbytes = 6, | 1064 | .eccbytes = 6, |
1052 | .eccpos = {0, 1, 2, 3, 4, 5}, | 1065 | .eccpos = {0, 1, 2, 3, 4, 5}, |
1053 | .oobfree = { {8, 8} } | 1066 | .oobfree = { {8, 8}, {6, 2} } |
1054 | }; | 1067 | }; |
1055 | 1068 | ||
1056 | /* Find the (I)NFTL Media Header, and optionally also the mirror media header. | 1069 | /* Find the (I)NFTL Media Header, and optionally also the mirror media header. |
@@ -1064,12 +1077,11 @@ static int __init find_media_headers(struct mtd_info *mtd, u_char *buf, | |||
1064 | { | 1077 | { |
1065 | struct nand_chip *this = mtd->priv; | 1078 | struct nand_chip *this = mtd->priv; |
1066 | struct doc_priv *doc = this->priv; | 1079 | struct doc_priv *doc = this->priv; |
1067 | unsigned offs, end = (MAX_MEDIAHEADER_SCAN << this->phys_erase_shift); | 1080 | unsigned offs; |
1068 | int ret; | 1081 | int ret; |
1069 | size_t retlen; | 1082 | size_t retlen; |
1070 | 1083 | ||
1071 | end = min(end, mtd->size); // paranoia | 1084 | for (offs = 0; offs < mtd->size; offs += mtd->erasesize) { |
1072 | for (offs = 0; offs < end; offs += mtd->erasesize) { | ||
1073 | ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf); | 1085 | ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf); |
1074 | if (retlen != mtd->oobblock) continue; | 1086 | if (retlen != mtd->oobblock) continue; |
1075 | if (ret) { | 1087 | if (ret) { |
@@ -1111,6 +1123,7 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, | |||
1111 | u_char *buf; | 1123 | u_char *buf; |
1112 | struct NFTLMediaHeader *mh; | 1124 | struct NFTLMediaHeader *mh; |
1113 | const unsigned psize = 1 << this->page_shift; | 1125 | const unsigned psize = 1 << this->page_shift; |
1126 | int numparts = 0; | ||
1114 | unsigned blocks, maxblocks; | 1127 | unsigned blocks, maxblocks; |
1115 | int offs, numheaders; | 1128 | int offs, numheaders; |
1116 | 1129 | ||
@@ -1122,8 +1135,10 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, | |||
1122 | if (!(numheaders=find_media_headers(mtd, buf, "ANAND", 1))) goto out; | 1135 | if (!(numheaders=find_media_headers(mtd, buf, "ANAND", 1))) goto out; |
1123 | mh = (struct NFTLMediaHeader *) buf; | 1136 | mh = (struct NFTLMediaHeader *) buf; |
1124 | 1137 | ||
1125 | //#ifdef CONFIG_MTD_DEBUG_VERBOSE | 1138 | mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits); |
1126 | // if (CONFIG_MTD_DEBUG_VERBOSE >= 2) | 1139 | mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN); |
1140 | mh->FormattedSize = le32_to_cpu(mh->FormattedSize); | ||
1141 | |||
1127 | printk(KERN_INFO " DataOrgID = %s\n" | 1142 | printk(KERN_INFO " DataOrgID = %s\n" |
1128 | " NumEraseUnits = %d\n" | 1143 | " NumEraseUnits = %d\n" |
1129 | " FirstPhysicalEUN = %d\n" | 1144 | " FirstPhysicalEUN = %d\n" |
@@ -1132,7 +1147,6 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, | |||
1132 | mh->DataOrgID, mh->NumEraseUnits, | 1147 | mh->DataOrgID, mh->NumEraseUnits, |
1133 | mh->FirstPhysicalEUN, mh->FormattedSize, | 1148 | mh->FirstPhysicalEUN, mh->FormattedSize, |
1134 | mh->UnitSizeFactor); | 1149 | mh->UnitSizeFactor); |
1135 | //#endif | ||
1136 | 1150 | ||
1137 | blocks = mtd->size >> this->phys_erase_shift; | 1151 | blocks = mtd->size >> this->phys_erase_shift; |
1138 | maxblocks = min(32768U, mtd->erasesize - psize); | 1152 | maxblocks = min(32768U, mtd->erasesize - psize); |
@@ -1175,23 +1189,28 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, | |||
1175 | offs <<= this->page_shift; | 1189 | offs <<= this->page_shift; |
1176 | offs += mtd->erasesize; | 1190 | offs += mtd->erasesize; |
1177 | 1191 | ||
1178 | //parts[0].name = " DiskOnChip Boot / Media Header partition"; | 1192 | if (show_firmware_partition == 1) { |
1179 | //parts[0].offset = 0; | 1193 | parts[0].name = " DiskOnChip Firmware / Media Header partition"; |
1180 | //parts[0].size = offs; | 1194 | parts[0].offset = 0; |
1195 | parts[0].size = offs; | ||
1196 | numparts = 1; | ||
1197 | } | ||
1181 | 1198 | ||
1182 | parts[0].name = " DiskOnChip BDTL partition"; | 1199 | parts[numparts].name = " DiskOnChip BDTL partition"; |
1183 | parts[0].offset = offs; | 1200 | parts[numparts].offset = offs; |
1184 | parts[0].size = (mh->NumEraseUnits - numheaders) << this->bbt_erase_shift; | 1201 | parts[numparts].size = (mh->NumEraseUnits - numheaders) << this->bbt_erase_shift; |
1202 | |||
1203 | offs += parts[numparts].size; | ||
1204 | numparts++; | ||
1185 | 1205 | ||
1186 | offs += parts[0].size; | ||
1187 | if (offs < mtd->size) { | 1206 | if (offs < mtd->size) { |
1188 | parts[1].name = " DiskOnChip Remainder partition"; | 1207 | parts[numparts].name = " DiskOnChip Remainder partition"; |
1189 | parts[1].offset = offs; | 1208 | parts[numparts].offset = offs; |
1190 | parts[1].size = mtd->size - offs; | 1209 | parts[numparts].size = mtd->size - offs; |
1191 | ret = 2; | 1210 | numparts++; |
1192 | goto out; | ||
1193 | } | 1211 | } |
1194 | ret = 1; | 1212 | |
1213 | ret = numparts; | ||
1195 | out: | 1214 | out: |
1196 | kfree(buf); | 1215 | kfree(buf); |
1197 | return ret; | 1216 | return ret; |
@@ -1233,8 +1252,6 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, | |||
1233 | mh->FormatFlags = le32_to_cpu(mh->FormatFlags); | 1252 | mh->FormatFlags = le32_to_cpu(mh->FormatFlags); |
1234 | mh->PercentUsed = le32_to_cpu(mh->PercentUsed); | 1253 | mh->PercentUsed = le32_to_cpu(mh->PercentUsed); |
1235 | 1254 | ||
1236 | //#ifdef CONFIG_MTD_DEBUG_VERBOSE | ||
1237 | // if (CONFIG_MTD_DEBUG_VERBOSE >= 2) | ||
1238 | printk(KERN_INFO " bootRecordID = %s\n" | 1255 | printk(KERN_INFO " bootRecordID = %s\n" |
1239 | " NoOfBootImageBlocks = %d\n" | 1256 | " NoOfBootImageBlocks = %d\n" |
1240 | " NoOfBinaryPartitions = %d\n" | 1257 | " NoOfBinaryPartitions = %d\n" |
@@ -1252,7 +1269,6 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, | |||
1252 | ((unsigned char *) &mh->OsakVersion)[2] & 0xf, | 1269 | ((unsigned char *) &mh->OsakVersion)[2] & 0xf, |
1253 | ((unsigned char *) &mh->OsakVersion)[3] & 0xf, | 1270 | ((unsigned char *) &mh->OsakVersion)[3] & 0xf, |
1254 | mh->PercentUsed); | 1271 | mh->PercentUsed); |
1255 | //#endif | ||
1256 | 1272 | ||
1257 | vshift = this->phys_erase_shift + mh->BlockMultiplierBits; | 1273 | vshift = this->phys_erase_shift + mh->BlockMultiplierBits; |
1258 | 1274 | ||
@@ -1278,8 +1294,6 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, | |||
1278 | ip->spareUnits = le32_to_cpu(ip->spareUnits); | 1294 | ip->spareUnits = le32_to_cpu(ip->spareUnits); |
1279 | ip->Reserved0 = le32_to_cpu(ip->Reserved0); | 1295 | ip->Reserved0 = le32_to_cpu(ip->Reserved0); |
1280 | 1296 | ||
1281 | //#ifdef CONFIG_MTD_DEBUG_VERBOSE | ||
1282 | // if (CONFIG_MTD_DEBUG_VERBOSE >= 2) | ||
1283 | printk(KERN_INFO " PARTITION[%d] ->\n" | 1297 | printk(KERN_INFO " PARTITION[%d] ->\n" |
1284 | " virtualUnits = %d\n" | 1298 | " virtualUnits = %d\n" |
1285 | " firstUnit = %d\n" | 1299 | " firstUnit = %d\n" |
@@ -1289,16 +1303,14 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, | |||
1289 | i, ip->virtualUnits, ip->firstUnit, | 1303 | i, ip->virtualUnits, ip->firstUnit, |
1290 | ip->lastUnit, ip->flags, | 1304 | ip->lastUnit, ip->flags, |
1291 | ip->spareUnits); | 1305 | ip->spareUnits); |
1292 | //#endif | ||
1293 | 1306 | ||
1294 | /* | 1307 | if ((show_firmware_partition == 1) && |
1295 | if ((i == 0) && (ip->firstUnit > 0)) { | 1308 | (i == 0) && (ip->firstUnit > 0)) { |
1296 | parts[0].name = " DiskOnChip IPL / Media Header partition"; | 1309 | parts[0].name = " DiskOnChip IPL / Media Header partition"; |
1297 | parts[0].offset = 0; | 1310 | parts[0].offset = 0; |
1298 | parts[0].size = mtd->erasesize * ip->firstUnit; | 1311 | parts[0].size = mtd->erasesize * ip->firstUnit; |
1299 | numparts = 1; | 1312 | numparts = 1; |
1300 | } | 1313 | } |
1301 | */ | ||
1302 | 1314 | ||
1303 | if (ip->flags & INFTL_BINARY) | 1315 | if (ip->flags & INFTL_BINARY) |
1304 | parts[numparts].name = " DiskOnChip BDK partition"; | 1316 | parts[numparts].name = " DiskOnChip BDK partition"; |
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 44d5b128911f..1bd71a598c79 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c | |||
@@ -28,6 +28,24 @@ | |||
28 | * among multiple independend devices. Suggestions and initial patch | 28 | * among multiple independend devices. Suggestions and initial patch |
29 | * from Ben Dooks <ben-mtd@fluff.org> | 29 | * from Ben Dooks <ben-mtd@fluff.org> |
30 | * | 30 | * |
31 | * 12-05-2004 dmarlin: add workaround for Renesas AG-AND chips "disturb" issue. | ||
32 | * Basically, any block not rewritten may lose data when surrounding blocks | ||
33 | * are rewritten many times. JFFS2 ensures this doesn't happen for blocks | ||
34 | * it uses, but the Bad Block Table(s) may not be rewritten. To ensure they | ||
35 | * do not lose data, force them to be rewritten when some of the surrounding | ||
36 | * blocks are erased. Rather than tracking a specific nearby block (which | ||
37 | * could itself go bad), use a page address 'mask' to select several blocks | ||
38 | * in the same area, and rewrite the BBT when any of them are erased. | ||
39 | * | ||
40 | * 01-03-2005 dmarlin: added support for the device recovery command sequence for Renesas | ||
41 | * AG-AND chips. If there was a sudden loss of power during an erase operation, | ||
42 | * a "device recovery" operation must be performed when power is restored | ||
43 | * to ensure correct operation. | ||
44 | * | ||
45 | * 01-20-2005 dmarlin: added support for optional hardware specific callback routine to | ||
46 | * perform extra error status checks on erase and write failures. This required | ||
47 | * adding a wrapper function for nand_read_ecc. | ||
48 | * | ||
31 | * Credits: | 49 | * Credits: |
32 | * David Woodhouse for adding multichip support | 50 | * David Woodhouse for adding multichip support |
33 | * | 51 | * |
@@ -41,7 +59,7 @@ | |||
41 | * The AG-AND chips have nice features for speed improvement, | 59 | * The AG-AND chips have nice features for speed improvement, |
42 | * which are not supported yet. Read / program 4 pages in one go. | 60 | * which are not supported yet. Read / program 4 pages in one go. |
43 | * | 61 | * |
44 | * $Id: nand_base.c,v 1.126 2004/12/13 11:22:25 lavinen Exp $ | 62 | * $Id: nand_base.c,v 1.146 2005/06/17 15:02:06 gleixner Exp $ |
45 | * | 63 | * |
46 | * This program is free software; you can redistribute it and/or modify | 64 | * This program is free software; you can redistribute it and/or modify |
47 | * it under the terms of the GNU General Public License version 2 as | 65 | * it under the terms of the GNU General Public License version 2 as |
@@ -149,17 +167,21 @@ static void nand_release_device (struct mtd_info *mtd) | |||
149 | 167 | ||
150 | /* De-select the NAND device */ | 168 | /* De-select the NAND device */ |
151 | this->select_chip(mtd, -1); | 169 | this->select_chip(mtd, -1); |
152 | /* Do we have a hardware controller ? */ | 170 | |
153 | if (this->controller) { | 171 | if (this->controller) { |
172 | /* Release the controller and the chip */ | ||
154 | spin_lock(&this->controller->lock); | 173 | spin_lock(&this->controller->lock); |
155 | this->controller->active = NULL; | 174 | this->controller->active = NULL; |
175 | this->state = FL_READY; | ||
176 | wake_up(&this->controller->wq); | ||
156 | spin_unlock(&this->controller->lock); | 177 | spin_unlock(&this->controller->lock); |
178 | } else { | ||
179 | /* Release the chip */ | ||
180 | spin_lock(&this->chip_lock); | ||
181 | this->state = FL_READY; | ||
182 | wake_up(&this->wq); | ||
183 | spin_unlock(&this->chip_lock); | ||
157 | } | 184 | } |
158 | /* Release the chip */ | ||
159 | spin_lock (&this->chip_lock); | ||
160 | this->state = FL_READY; | ||
161 | wake_up (&this->wq); | ||
162 | spin_unlock (&this->chip_lock); | ||
163 | } | 185 | } |
164 | 186 | ||
165 | /** | 187 | /** |
@@ -443,7 +465,8 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) | |||
443 | 465 | ||
444 | /* Get block number */ | 466 | /* Get block number */ |
445 | block = ((int) ofs) >> this->bbt_erase_shift; | 467 | block = ((int) ofs) >> this->bbt_erase_shift; |
446 | this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); | 468 | if (this->bbt) |
469 | this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); | ||
447 | 470 | ||
448 | /* Do we have a flash based bad block table ? */ | 471 | /* Do we have a flash based bad block table ? */ |
449 | if (this->options & NAND_USE_FLASH_BBT) | 472 | if (this->options & NAND_USE_FLASH_BBT) |
@@ -466,7 +489,7 @@ static int nand_check_wp (struct mtd_info *mtd) | |||
466 | struct nand_chip *this = mtd->priv; | 489 | struct nand_chip *this = mtd->priv; |
467 | /* Check the WP bit */ | 490 | /* Check the WP bit */ |
468 | this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1); | 491 | this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1); |
469 | return (this->read_byte(mtd) & 0x80) ? 0 : 1; | 492 | return (this->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1; |
470 | } | 493 | } |
471 | 494 | ||
472 | /** | 495 | /** |
@@ -490,6 +513,22 @@ static int nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, i | |||
490 | return nand_isbad_bbt (mtd, ofs, allowbbt); | 513 | return nand_isbad_bbt (mtd, ofs, allowbbt); |
491 | } | 514 | } |
492 | 515 | ||
516 | /* | ||
517 | * Wait for the ready pin, after a command | ||
518 | * The timeout is catched later. | ||
519 | */ | ||
520 | static void nand_wait_ready(struct mtd_info *mtd) | ||
521 | { | ||
522 | struct nand_chip *this = mtd->priv; | ||
523 | unsigned long timeo = jiffies + 2; | ||
524 | |||
525 | /* wait until command is processed or timeout occures */ | ||
526 | do { | ||
527 | if (this->dev_ready(mtd)) | ||
528 | return; | ||
529 | } while (time_before(jiffies, timeo)); | ||
530 | } | ||
531 | |||
493 | /** | 532 | /** |
494 | * nand_command - [DEFAULT] Send command to NAND device | 533 | * nand_command - [DEFAULT] Send command to NAND device |
495 | * @mtd: MTD device structure | 534 | * @mtd: MTD device structure |
@@ -571,7 +610,7 @@ static void nand_command (struct mtd_info *mtd, unsigned command, int column, in | |||
571 | this->hwcontrol(mtd, NAND_CTL_SETCLE); | 610 | this->hwcontrol(mtd, NAND_CTL_SETCLE); |
572 | this->write_byte(mtd, NAND_CMD_STATUS); | 611 | this->write_byte(mtd, NAND_CMD_STATUS); |
573 | this->hwcontrol(mtd, NAND_CTL_CLRCLE); | 612 | this->hwcontrol(mtd, NAND_CTL_CLRCLE); |
574 | while ( !(this->read_byte(mtd) & 0x40)); | 613 | while ( !(this->read_byte(mtd) & NAND_STATUS_READY)); |
575 | return; | 614 | return; |
576 | 615 | ||
577 | /* This applies to read commands */ | 616 | /* This applies to read commands */ |
@@ -585,12 +624,11 @@ static void nand_command (struct mtd_info *mtd, unsigned command, int column, in | |||
585 | return; | 624 | return; |
586 | } | 625 | } |
587 | } | 626 | } |
588 | |||
589 | /* Apply this short delay always to ensure that we do wait tWB in | 627 | /* Apply this short delay always to ensure that we do wait tWB in |
590 | * any case on any machine. */ | 628 | * any case on any machine. */ |
591 | ndelay (100); | 629 | ndelay (100); |
592 | /* wait until command is processed */ | 630 | |
593 | while (!this->dev_ready(mtd)); | 631 | nand_wait_ready(mtd); |
594 | } | 632 | } |
595 | 633 | ||
596 | /** | 634 | /** |
@@ -619,7 +657,7 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column, | |||
619 | /* Begin command latch cycle */ | 657 | /* Begin command latch cycle */ |
620 | this->hwcontrol(mtd, NAND_CTL_SETCLE); | 658 | this->hwcontrol(mtd, NAND_CTL_SETCLE); |
621 | /* Write out the command to the device. */ | 659 | /* Write out the command to the device. */ |
622 | this->write_byte(mtd, command); | 660 | this->write_byte(mtd, (command & 0xff)); |
623 | /* End command latch cycle */ | 661 | /* End command latch cycle */ |
624 | this->hwcontrol(mtd, NAND_CTL_CLRCLE); | 662 | this->hwcontrol(mtd, NAND_CTL_CLRCLE); |
625 | 663 | ||
@@ -647,8 +685,8 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column, | |||
647 | 685 | ||
648 | /* | 686 | /* |
649 | * program and erase have their own busy handlers | 687 | * program and erase have their own busy handlers |
650 | * status and sequential in needs no delay | 688 | * status, sequential in, and deplete1 need no delay |
651 | */ | 689 | */ |
652 | switch (command) { | 690 | switch (command) { |
653 | 691 | ||
654 | case NAND_CMD_CACHEDPROG: | 692 | case NAND_CMD_CACHEDPROG: |
@@ -657,8 +695,19 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column, | |||
657 | case NAND_CMD_ERASE2: | 695 | case NAND_CMD_ERASE2: |
658 | case NAND_CMD_SEQIN: | 696 | case NAND_CMD_SEQIN: |
659 | case NAND_CMD_STATUS: | 697 | case NAND_CMD_STATUS: |
698 | case NAND_CMD_DEPLETE1: | ||
660 | return; | 699 | return; |
661 | 700 | ||
701 | /* | ||
702 | * read error status commands require only a short delay | ||
703 | */ | ||
704 | case NAND_CMD_STATUS_ERROR: | ||
705 | case NAND_CMD_STATUS_ERROR0: | ||
706 | case NAND_CMD_STATUS_ERROR1: | ||
707 | case NAND_CMD_STATUS_ERROR2: | ||
708 | case NAND_CMD_STATUS_ERROR3: | ||
709 | udelay(this->chip_delay); | ||
710 | return; | ||
662 | 711 | ||
663 | case NAND_CMD_RESET: | 712 | case NAND_CMD_RESET: |
664 | if (this->dev_ready) | 713 | if (this->dev_ready) |
@@ -667,7 +716,7 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column, | |||
667 | this->hwcontrol(mtd, NAND_CTL_SETCLE); | 716 | this->hwcontrol(mtd, NAND_CTL_SETCLE); |
668 | this->write_byte(mtd, NAND_CMD_STATUS); | 717 | this->write_byte(mtd, NAND_CMD_STATUS); |
669 | this->hwcontrol(mtd, NAND_CTL_CLRCLE); | 718 | this->hwcontrol(mtd, NAND_CTL_CLRCLE); |
670 | while ( !(this->read_byte(mtd) & 0x40)); | 719 | while ( !(this->read_byte(mtd) & NAND_STATUS_READY)); |
671 | return; | 720 | return; |
672 | 721 | ||
673 | case NAND_CMD_READ0: | 722 | case NAND_CMD_READ0: |
@@ -690,12 +739,12 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column, | |||
690 | return; | 739 | return; |
691 | } | 740 | } |
692 | } | 741 | } |
693 | 742 | ||
694 | /* Apply this short delay always to ensure that we do wait tWB in | 743 | /* Apply this short delay always to ensure that we do wait tWB in |
695 | * any case on any machine. */ | 744 | * any case on any machine. */ |
696 | ndelay (100); | 745 | ndelay (100); |
697 | /* wait until command is processed */ | 746 | |
698 | while (!this->dev_ready(mtd)); | 747 | nand_wait_ready(mtd); |
699 | } | 748 | } |
700 | 749 | ||
701 | /** | 750 | /** |
@@ -708,37 +757,34 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column, | |||
708 | */ | 757 | */ |
709 | static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state) | 758 | static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state) |
710 | { | 759 | { |
711 | struct nand_chip *active = this; | 760 | struct nand_chip *active; |
712 | 761 | spinlock_t *lock; | |
762 | wait_queue_head_t *wq; | ||
713 | DECLARE_WAITQUEUE (wait, current); | 763 | DECLARE_WAITQUEUE (wait, current); |
714 | 764 | ||
715 | /* | 765 | lock = (this->controller) ? &this->controller->lock : &this->chip_lock; |
716 | * Grab the lock and see if the device is available | 766 | wq = (this->controller) ? &this->controller->wq : &this->wq; |
717 | */ | ||
718 | retry: | 767 | retry: |
768 | active = this; | ||
769 | spin_lock(lock); | ||
770 | |||
719 | /* Hardware controller shared among independend devices */ | 771 | /* Hardware controller shared among independend devices */ |
720 | if (this->controller) { | 772 | if (this->controller) { |
721 | spin_lock (&this->controller->lock); | ||
722 | if (this->controller->active) | 773 | if (this->controller->active) |
723 | active = this->controller->active; | 774 | active = this->controller->active; |
724 | else | 775 | else |
725 | this->controller->active = this; | 776 | this->controller->active = this; |
726 | spin_unlock (&this->controller->lock); | ||
727 | } | 777 | } |
728 | 778 | if (active == this && this->state == FL_READY) { | |
729 | if (active == this) { | 779 | this->state = new_state; |
730 | spin_lock (&this->chip_lock); | 780 | spin_unlock(lock); |
731 | if (this->state == FL_READY) { | 781 | return; |
732 | this->state = new_state; | 782 | } |
733 | spin_unlock (&this->chip_lock); | 783 | set_current_state(TASK_UNINTERRUPTIBLE); |
734 | return; | 784 | add_wait_queue(wq, &wait); |
735 | } | 785 | spin_unlock(lock); |
736 | } | 786 | schedule(); |
737 | set_current_state (TASK_UNINTERRUPTIBLE); | 787 | remove_wait_queue(wq, &wait); |
738 | add_wait_queue (&active->wq, &wait); | ||
739 | spin_unlock (&active->chip_lock); | ||
740 | schedule (); | ||
741 | remove_wait_queue (&active->wq, &wait); | ||
742 | goto retry; | 788 | goto retry; |
743 | } | 789 | } |
744 | 790 | ||
@@ -785,7 +831,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state) | |||
785 | if (this->read_byte(mtd) & NAND_STATUS_READY) | 831 | if (this->read_byte(mtd) & NAND_STATUS_READY) |
786 | break; | 832 | break; |
787 | } | 833 | } |
788 | yield (); | 834 | cond_resched(); |
789 | } | 835 | } |
790 | status = (int) this->read_byte(mtd); | 836 | status = (int) this->read_byte(mtd); |
791 | return status; | 837 | return status; |
@@ -871,8 +917,14 @@ static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int pa | |||
871 | if (!cached) { | 917 | if (!cached) { |
872 | /* call wait ready function */ | 918 | /* call wait ready function */ |
873 | status = this->waitfunc (mtd, this, FL_WRITING); | 919 | status = this->waitfunc (mtd, this, FL_WRITING); |
920 | |||
921 | /* See if operation failed and additional status checks are available */ | ||
922 | if ((status & NAND_STATUS_FAIL) && (this->errstat)) { | ||
923 | status = this->errstat(mtd, this, FL_WRITING, status, page); | ||
924 | } | ||
925 | |||
874 | /* See if device thinks it succeeded */ | 926 | /* See if device thinks it succeeded */ |
875 | if (status & 0x01) { | 927 | if (status & NAND_STATUS_FAIL) { |
876 | DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page); | 928 | DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page); |
877 | return -EIO; | 929 | return -EIO; |
878 | } | 930 | } |
@@ -975,7 +1027,7 @@ static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int | |||
975 | if (!this->dev_ready) | 1027 | if (!this->dev_ready) |
976 | udelay (this->chip_delay); | 1028 | udelay (this->chip_delay); |
977 | else | 1029 | else |
978 | while (!this->dev_ready(mtd)); | 1030 | nand_wait_ready(mtd); |
979 | 1031 | ||
980 | /* All done, return happy */ | 1032 | /* All done, return happy */ |
981 | if (!numpages) | 1033 | if (!numpages) |
@@ -997,23 +1049,24 @@ out: | |||
997 | #endif | 1049 | #endif |
998 | 1050 | ||
999 | /** | 1051 | /** |
1000 | * nand_read - [MTD Interface] MTD compability function for nand_read_ecc | 1052 | * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc |
1001 | * @mtd: MTD device structure | 1053 | * @mtd: MTD device structure |
1002 | * @from: offset to read from | 1054 | * @from: offset to read from |
1003 | * @len: number of bytes to read | 1055 | * @len: number of bytes to read |
1004 | * @retlen: pointer to variable to store the number of read bytes | 1056 | * @retlen: pointer to variable to store the number of read bytes |
1005 | * @buf: the databuffer to put data | 1057 | * @buf: the databuffer to put data |
1006 | * | 1058 | * |
1007 | * This function simply calls nand_read_ecc with oob buffer and oobsel = NULL | 1059 | * This function simply calls nand_do_read_ecc with oob buffer and oobsel = NULL |
1008 | */ | 1060 | * and flags = 0xff |
1061 | */ | ||
1009 | static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) | 1062 | static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) |
1010 | { | 1063 | { |
1011 | return nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL); | 1064 | return nand_do_read_ecc (mtd, from, len, retlen, buf, NULL, &mtd->oobinfo, 0xff); |
1012 | } | 1065 | } |
1013 | 1066 | ||
1014 | 1067 | ||
1015 | /** | 1068 | /** |
1016 | * nand_read_ecc - [MTD Interface] Read data with ECC | 1069 | * nand_read_ecc - [MTD Interface] MTD compability function for nand_do_read_ecc |
1017 | * @mtd: MTD device structure | 1070 | * @mtd: MTD device structure |
1018 | * @from: offset to read from | 1071 | * @from: offset to read from |
1019 | * @len: number of bytes to read | 1072 | * @len: number of bytes to read |
@@ -1022,11 +1075,39 @@ static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * re | |||
1022 | * @oob_buf: filesystem supplied oob data buffer | 1075 | * @oob_buf: filesystem supplied oob data buffer |
1023 | * @oobsel: oob selection structure | 1076 | * @oobsel: oob selection structure |
1024 | * | 1077 | * |
1025 | * NAND read with ECC | 1078 | * This function simply calls nand_do_read_ecc with flags = 0xff |
1026 | */ | 1079 | */ |
1027 | static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, | 1080 | static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, |
1028 | size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel) | 1081 | size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel) |
1029 | { | 1082 | { |
1083 | /* use userspace supplied oobinfo, if zero */ | ||
1084 | if (oobsel == NULL) | ||
1085 | oobsel = &mtd->oobinfo; | ||
1086 | return nand_do_read_ecc(mtd, from, len, retlen, buf, oob_buf, oobsel, 0xff); | ||
1087 | } | ||
1088 | |||
1089 | |||
1090 | /** | ||
1091 | * nand_do_read_ecc - [MTD Interface] Read data with ECC | ||
1092 | * @mtd: MTD device structure | ||
1093 | * @from: offset to read from | ||
1094 | * @len: number of bytes to read | ||
1095 | * @retlen: pointer to variable to store the number of read bytes | ||
1096 | * @buf: the databuffer to put data | ||
1097 | * @oob_buf: filesystem supplied oob data buffer (can be NULL) | ||
1098 | * @oobsel: oob selection structure | ||
1099 | * @flags: flag to indicate if nand_get_device/nand_release_device should be preformed | ||
1100 | * and how many corrected error bits are acceptable: | ||
1101 | * bits 0..7 - number of tolerable errors | ||
1102 | * bit 8 - 0 == do not get/release chip, 1 == get/release chip | ||
1103 | * | ||
1104 | * NAND read with ECC | ||
1105 | */ | ||
1106 | int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, | ||
1107 | size_t * retlen, u_char * buf, u_char * oob_buf, | ||
1108 | struct nand_oobinfo *oobsel, int flags) | ||
1109 | { | ||
1110 | |||
1030 | int i, j, col, realpage, page, end, ecc, chipnr, sndcmd = 1; | 1111 | int i, j, col, realpage, page, end, ecc, chipnr, sndcmd = 1; |
1031 | int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0; | 1112 | int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0; |
1032 | struct nand_chip *this = mtd->priv; | 1113 | struct nand_chip *this = mtd->priv; |
@@ -1051,12 +1132,9 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, | |||
1051 | } | 1132 | } |
1052 | 1133 | ||
1053 | /* Grab the lock and see if the device is available */ | 1134 | /* Grab the lock and see if the device is available */ |
1054 | nand_get_device (this, mtd ,FL_READING); | 1135 | if (flags & NAND_GET_DEVICE) |
1136 | nand_get_device (this, mtd, FL_READING); | ||
1055 | 1137 | ||
1056 | /* use userspace supplied oobinfo, if zero */ | ||
1057 | if (oobsel == NULL) | ||
1058 | oobsel = &mtd->oobinfo; | ||
1059 | |||
1060 | /* Autoplace of oob data ? Use the default placement scheme */ | 1138 | /* Autoplace of oob data ? Use the default placement scheme */ |
1061 | if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) | 1139 | if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) |
1062 | oobsel = this->autooob; | 1140 | oobsel = this->autooob; |
@@ -1118,7 +1196,8 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, | |||
1118 | } | 1196 | } |
1119 | 1197 | ||
1120 | /* get oob area, if we have no oob buffer from fs-driver */ | 1198 | /* get oob area, if we have no oob buffer from fs-driver */ |
1121 | if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE) | 1199 | if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE || |
1200 | oobsel->useecc == MTD_NANDECC_AUTOPL_USR) | ||
1122 | oob_data = &this->data_buf[end]; | 1201 | oob_data = &this->data_buf[end]; |
1123 | 1202 | ||
1124 | eccsteps = this->eccsteps; | 1203 | eccsteps = this->eccsteps; |
@@ -1155,7 +1234,8 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, | |||
1155 | /* We calc error correction directly, it checks the hw | 1234 | /* We calc error correction directly, it checks the hw |
1156 | * generator for an error, reads back the syndrome and | 1235 | * generator for an error, reads back the syndrome and |
1157 | * does the error correction on the fly */ | 1236 | * does the error correction on the fly */ |
1158 | if (this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]) == -1) { | 1237 | ecc_status = this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]); |
1238 | if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) { | ||
1159 | DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " | 1239 | DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " |
1160 | "Failed ECC read, page 0x%08x on chip %d\n", page, chipnr); | 1240 | "Failed ECC read, page 0x%08x on chip %d\n", page, chipnr); |
1161 | ecc_failed++; | 1241 | ecc_failed++; |
@@ -1194,7 +1274,7 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, | |||
1194 | p[i] = ecc_status; | 1274 | p[i] = ecc_status; |
1195 | } | 1275 | } |
1196 | 1276 | ||
1197 | if (ecc_status == -1) { | 1277 | if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) { |
1198 | DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page); | 1278 | DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page); |
1199 | ecc_failed++; | 1279 | ecc_failed++; |
1200 | } | 1280 | } |
@@ -1206,14 +1286,14 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, | |||
1206 | /* without autoplace. Legacy mode used by YAFFS1 */ | 1286 | /* without autoplace. Legacy mode used by YAFFS1 */ |
1207 | switch(oobsel->useecc) { | 1287 | switch(oobsel->useecc) { |
1208 | case MTD_NANDECC_AUTOPLACE: | 1288 | case MTD_NANDECC_AUTOPLACE: |
1289 | case MTD_NANDECC_AUTOPL_USR: | ||
1209 | /* Walk through the autoplace chunks */ | 1290 | /* Walk through the autoplace chunks */ |
1210 | for (i = 0, j = 0; j < mtd->oobavail; i++) { | 1291 | for (i = 0; oobsel->oobfree[i][1]; i++) { |
1211 | int from = oobsel->oobfree[i][0]; | 1292 | int from = oobsel->oobfree[i][0]; |
1212 | int num = oobsel->oobfree[i][1]; | 1293 | int num = oobsel->oobfree[i][1]; |
1213 | memcpy(&oob_buf[oob], &oob_data[from], num); | 1294 | memcpy(&oob_buf[oob], &oob_data[from], num); |
1214 | j+= num; | 1295 | oob += num; |
1215 | } | 1296 | } |
1216 | oob += mtd->oobavail; | ||
1217 | break; | 1297 | break; |
1218 | case MTD_NANDECC_PLACE: | 1298 | case MTD_NANDECC_PLACE: |
1219 | /* YAFFS1 legacy mode */ | 1299 | /* YAFFS1 legacy mode */ |
@@ -1239,7 +1319,7 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, | |||
1239 | if (!this->dev_ready) | 1319 | if (!this->dev_ready) |
1240 | udelay (this->chip_delay); | 1320 | udelay (this->chip_delay); |
1241 | else | 1321 | else |
1242 | while (!this->dev_ready(mtd)); | 1322 | nand_wait_ready(mtd); |
1243 | 1323 | ||
1244 | if (read == len) | 1324 | if (read == len) |
1245 | break; | 1325 | break; |
@@ -1264,7 +1344,8 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, | |||
1264 | } | 1344 | } |
1265 | 1345 | ||
1266 | /* Deselect and wake up anyone waiting on the device */ | 1346 | /* Deselect and wake up anyone waiting on the device */ |
1267 | nand_release_device(mtd); | 1347 | if (flags & NAND_GET_DEVICE) |
1348 | nand_release_device(mtd); | ||
1268 | 1349 | ||
1269 | /* | 1350 | /* |
1270 | * Return success, if no ECC failures, else -EBADMSG | 1351 | * Return success, if no ECC failures, else -EBADMSG |
@@ -1337,7 +1418,7 @@ static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t | |||
1337 | if (!this->dev_ready) | 1418 | if (!this->dev_ready) |
1338 | udelay (this->chip_delay); | 1419 | udelay (this->chip_delay); |
1339 | else | 1420 | else |
1340 | while (!this->dev_ready(mtd)); | 1421 | nand_wait_ready(mtd); |
1341 | 1422 | ||
1342 | /* Read more ? */ | 1423 | /* Read more ? */ |
1343 | if (i < len) { | 1424 | if (i < len) { |
@@ -1417,7 +1498,7 @@ int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, | |||
1417 | if (!this->dev_ready) | 1498 | if (!this->dev_ready) |
1418 | udelay (this->chip_delay); | 1499 | udelay (this->chip_delay); |
1419 | else | 1500 | else |
1420 | while (!this->dev_ready(mtd)); | 1501 | nand_wait_ready(mtd); |
1421 | 1502 | ||
1422 | /* Check, if the chip supports auto page increment */ | 1503 | /* Check, if the chip supports auto page increment */ |
1423 | if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) | 1504 | if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) |
@@ -1567,6 +1648,8 @@ static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, | |||
1567 | oobsel = this->autooob; | 1648 | oobsel = this->autooob; |
1568 | autoplace = 1; | 1649 | autoplace = 1; |
1569 | } | 1650 | } |
1651 | if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR) | ||
1652 | autoplace = 1; | ||
1570 | 1653 | ||
1571 | /* Setup variables and oob buffer */ | 1654 | /* Setup variables and oob buffer */ |
1572 | totalpages = len >> this->page_shift; | 1655 | totalpages = len >> this->page_shift; |
@@ -1733,7 +1816,7 @@ static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * | |||
1733 | status = this->waitfunc (mtd, this, FL_WRITING); | 1816 | status = this->waitfunc (mtd, this, FL_WRITING); |
1734 | 1817 | ||
1735 | /* See if device thinks it succeeded */ | 1818 | /* See if device thinks it succeeded */ |
1736 | if (status & 0x01) { | 1819 | if (status & NAND_STATUS_FAIL) { |
1737 | DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page); | 1820 | DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page); |
1738 | ret = -EIO; | 1821 | ret = -EIO; |
1739 | goto out; | 1822 | goto out; |
@@ -1841,6 +1924,8 @@ static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsig | |||
1841 | oobsel = this->autooob; | 1924 | oobsel = this->autooob; |
1842 | autoplace = 1; | 1925 | autoplace = 1; |
1843 | } | 1926 | } |
1927 | if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR) | ||
1928 | autoplace = 1; | ||
1844 | 1929 | ||
1845 | /* Setup start page */ | 1930 | /* Setup start page */ |
1846 | page = (int) (to >> this->page_shift); | 1931 | page = (int) (to >> this->page_shift); |
@@ -1987,6 +2072,7 @@ static int nand_erase (struct mtd_info *mtd, struct erase_info *instr) | |||
1987 | return nand_erase_nand (mtd, instr, 0); | 2072 | return nand_erase_nand (mtd, instr, 0); |
1988 | } | 2073 | } |
1989 | 2074 | ||
2075 | #define BBT_PAGE_MASK 0xffffff3f | ||
1990 | /** | 2076 | /** |
1991 | * nand_erase_intern - [NAND Interface] erase block(s) | 2077 | * nand_erase_intern - [NAND Interface] erase block(s) |
1992 | * @mtd: MTD device structure | 2078 | * @mtd: MTD device structure |
@@ -1999,6 +2085,10 @@ int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbb | |||
1999 | { | 2085 | { |
2000 | int page, len, status, pages_per_block, ret, chipnr; | 2086 | int page, len, status, pages_per_block, ret, chipnr; |
2001 | struct nand_chip *this = mtd->priv; | 2087 | struct nand_chip *this = mtd->priv; |
2088 | int rewrite_bbt[NAND_MAX_CHIPS]={0}; /* flags to indicate the page, if bbt needs to be rewritten. */ | ||
2089 | unsigned int bbt_masked_page; /* bbt mask to compare to page being erased. */ | ||
2090 | /* It is used to see if the current page is in the same */ | ||
2091 | /* 256 block group and the same bank as the bbt. */ | ||
2002 | 2092 | ||
2003 | DEBUG (MTD_DEBUG_LEVEL3, | 2093 | DEBUG (MTD_DEBUG_LEVEL3, |
2004 | "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len); | 2094 | "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len); |
@@ -2044,6 +2134,13 @@ int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbb | |||
2044 | goto erase_exit; | 2134 | goto erase_exit; |
2045 | } | 2135 | } |
2046 | 2136 | ||
2137 | /* if BBT requires refresh, set the BBT page mask to see if the BBT should be rewritten */ | ||
2138 | if (this->options & BBT_AUTO_REFRESH) { | ||
2139 | bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK; | ||
2140 | } else { | ||
2141 | bbt_masked_page = 0xffffffff; /* should not match anything */ | ||
2142 | } | ||
2143 | |||
2047 | /* Loop through the pages */ | 2144 | /* Loop through the pages */ |
2048 | len = instr->len; | 2145 | len = instr->len; |
2049 | 2146 | ||
@@ -2066,13 +2163,26 @@ int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbb | |||
2066 | 2163 | ||
2067 | status = this->waitfunc (mtd, this, FL_ERASING); | 2164 | status = this->waitfunc (mtd, this, FL_ERASING); |
2068 | 2165 | ||
2166 | /* See if operation failed and additional status checks are available */ | ||
2167 | if ((status & NAND_STATUS_FAIL) && (this->errstat)) { | ||
2168 | status = this->errstat(mtd, this, FL_ERASING, status, page); | ||
2169 | } | ||
2170 | |||
2069 | /* See if block erase succeeded */ | 2171 | /* See if block erase succeeded */ |
2070 | if (status & 0x01) { | 2172 | if (status & NAND_STATUS_FAIL) { |
2071 | DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page); | 2173 | DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page); |
2072 | instr->state = MTD_ERASE_FAILED; | 2174 | instr->state = MTD_ERASE_FAILED; |
2073 | instr->fail_addr = (page << this->page_shift); | 2175 | instr->fail_addr = (page << this->page_shift); |
2074 | goto erase_exit; | 2176 | goto erase_exit; |
2075 | } | 2177 | } |
2178 | |||
2179 | /* if BBT requires refresh, set the BBT rewrite flag to the page being erased */ | ||
2180 | if (this->options & BBT_AUTO_REFRESH) { | ||
2181 | if (((page & BBT_PAGE_MASK) == bbt_masked_page) && | ||
2182 | (page != this->bbt_td->pages[chipnr])) { | ||
2183 | rewrite_bbt[chipnr] = (page << this->page_shift); | ||
2184 | } | ||
2185 | } | ||
2076 | 2186 | ||
2077 | /* Increment page address and decrement length */ | 2187 | /* Increment page address and decrement length */ |
2078 | len -= (1 << this->phys_erase_shift); | 2188 | len -= (1 << this->phys_erase_shift); |
@@ -2083,6 +2193,13 @@ int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbb | |||
2083 | chipnr++; | 2193 | chipnr++; |
2084 | this->select_chip(mtd, -1); | 2194 | this->select_chip(mtd, -1); |
2085 | this->select_chip(mtd, chipnr); | 2195 | this->select_chip(mtd, chipnr); |
2196 | |||
2197 | /* if BBT requires refresh and BBT-PERCHIP, | ||
2198 | * set the BBT page mask to see if this BBT should be rewritten */ | ||
2199 | if ((this->options & BBT_AUTO_REFRESH) && (this->bbt_td->options & NAND_BBT_PERCHIP)) { | ||
2200 | bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK; | ||
2201 | } | ||
2202 | |||
2086 | } | 2203 | } |
2087 | } | 2204 | } |
2088 | instr->state = MTD_ERASE_DONE; | 2205 | instr->state = MTD_ERASE_DONE; |
@@ -2097,6 +2214,18 @@ erase_exit: | |||
2097 | /* Deselect and wake up anyone waiting on the device */ | 2214 | /* Deselect and wake up anyone waiting on the device */ |
2098 | nand_release_device(mtd); | 2215 | nand_release_device(mtd); |
2099 | 2216 | ||
2217 | /* if BBT requires refresh and erase was successful, rewrite any selected bad block tables */ | ||
2218 | if ((this->options & BBT_AUTO_REFRESH) && (!ret)) { | ||
2219 | for (chipnr = 0; chipnr < this->numchips; chipnr++) { | ||
2220 | if (rewrite_bbt[chipnr]) { | ||
2221 | /* update the BBT for chip */ | ||
2222 | DEBUG (MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt (%d:0x%0x 0x%0x)\n", | ||
2223 | chipnr, rewrite_bbt[chipnr], this->bbt_td->pages[chipnr]); | ||
2224 | nand_update_bbt (mtd, rewrite_bbt[chipnr]); | ||
2225 | } | ||
2226 | } | ||
2227 | } | ||
2228 | |||
2100 | /* Return more or less happy */ | 2229 | /* Return more or less happy */ |
2101 | return ret; | 2230 | return ret; |
2102 | } | 2231 | } |
@@ -2168,7 +2297,7 @@ static int nand_block_markbad (struct mtd_info *mtd, loff_t ofs) | |||
2168 | */ | 2297 | */ |
2169 | int nand_scan (struct mtd_info *mtd, int maxchips) | 2298 | int nand_scan (struct mtd_info *mtd, int maxchips) |
2170 | { | 2299 | { |
2171 | int i, j, nand_maf_id, nand_dev_id, busw; | 2300 | int i, nand_maf_id, nand_dev_id, busw, maf_id; |
2172 | struct nand_chip *this = mtd->priv; | 2301 | struct nand_chip *this = mtd->priv; |
2173 | 2302 | ||
2174 | /* Get buswidth to select the correct functions*/ | 2303 | /* Get buswidth to select the correct functions*/ |
@@ -2256,12 +2385,18 @@ int nand_scan (struct mtd_info *mtd, int maxchips) | |||
2256 | busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16; | 2385 | busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16; |
2257 | } | 2386 | } |
2258 | 2387 | ||
2388 | /* Try to identify manufacturer */ | ||
2389 | for (maf_id = 0; nand_manuf_ids[maf_id].id != 0x0; maf_id++) { | ||
2390 | if (nand_manuf_ids[maf_id].id == nand_maf_id) | ||
2391 | break; | ||
2392 | } | ||
2393 | |||
2259 | /* Check, if buswidth is correct. Hardware drivers should set | 2394 | /* Check, if buswidth is correct. Hardware drivers should set |
2260 | * this correct ! */ | 2395 | * this correct ! */ |
2261 | if (busw != (this->options & NAND_BUSWIDTH_16)) { | 2396 | if (busw != (this->options & NAND_BUSWIDTH_16)) { |
2262 | printk (KERN_INFO "NAND device: Manufacturer ID:" | 2397 | printk (KERN_INFO "NAND device: Manufacturer ID:" |
2263 | " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, | 2398 | " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, |
2264 | nand_manuf_ids[i].name , mtd->name); | 2399 | nand_manuf_ids[maf_id].name , mtd->name); |
2265 | printk (KERN_WARNING | 2400 | printk (KERN_WARNING |
2266 | "NAND bus width %d instead %d bit\n", | 2401 | "NAND bus width %d instead %d bit\n", |
2267 | (this->options & NAND_BUSWIDTH_16) ? 16 : 8, | 2402 | (this->options & NAND_BUSWIDTH_16) ? 16 : 8, |
@@ -2300,14 +2435,9 @@ int nand_scan (struct mtd_info *mtd, int maxchips) | |||
2300 | if (mtd->oobblock > 512 && this->cmdfunc == nand_command) | 2435 | if (mtd->oobblock > 512 && this->cmdfunc == nand_command) |
2301 | this->cmdfunc = nand_command_lp; | 2436 | this->cmdfunc = nand_command_lp; |
2302 | 2437 | ||
2303 | /* Try to identify manufacturer */ | ||
2304 | for (j = 0; nand_manuf_ids[j].id != 0x0; j++) { | ||
2305 | if (nand_manuf_ids[j].id == nand_maf_id) | ||
2306 | break; | ||
2307 | } | ||
2308 | printk (KERN_INFO "NAND device: Manufacturer ID:" | 2438 | printk (KERN_INFO "NAND device: Manufacturer ID:" |
2309 | " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, | 2439 | " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, |
2310 | nand_manuf_ids[j].name , nand_flash_ids[i].name); | 2440 | nand_manuf_ids[maf_id].name , nand_flash_ids[i].name); |
2311 | break; | 2441 | break; |
2312 | } | 2442 | } |
2313 | 2443 | ||
@@ -2388,12 +2518,9 @@ int nand_scan (struct mtd_info *mtd, int maxchips) | |||
2388 | 2518 | ||
2389 | /* The number of bytes available for the filesystem to place fs dependend | 2519 | /* The number of bytes available for the filesystem to place fs dependend |
2390 | * oob data */ | 2520 | * oob data */ |
2391 | if (this->options & NAND_BUSWIDTH_16) { | 2521 | mtd->oobavail = 0; |
2392 | mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2); | 2522 | for (i = 0; this->autooob->oobfree[i][1]; i++) |
2393 | if (this->autooob->eccbytes & 0x01) | 2523 | mtd->oobavail += this->autooob->oobfree[i][1]; |
2394 | mtd->oobavail--; | ||
2395 | } else | ||
2396 | mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1); | ||
2397 | 2524 | ||
2398 | /* | 2525 | /* |
2399 | * check ECC mode, default to software | 2526 | * check ECC mode, default to software |
@@ -2524,6 +2651,10 @@ int nand_scan (struct mtd_info *mtd, int maxchips) | |||
2524 | memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo)); | 2651 | memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo)); |
2525 | 2652 | ||
2526 | mtd->owner = THIS_MODULE; | 2653 | mtd->owner = THIS_MODULE; |
2654 | |||
2655 | /* Check, if we should skip the bad block table scan */ | ||
2656 | if (this->options & NAND_SKIP_BBTSCAN) | ||
2657 | return 0; | ||
2527 | 2658 | ||
2528 | /* Build bad block table */ | 2659 | /* Build bad block table */ |
2529 | return this->scan_bbt (mtd); | 2660 | return this->scan_bbt (mtd); |
@@ -2555,8 +2686,8 @@ void nand_release (struct mtd_info *mtd) | |||
2555 | kfree (this->data_buf); | 2686 | kfree (this->data_buf); |
2556 | } | 2687 | } |
2557 | 2688 | ||
2558 | EXPORT_SYMBOL (nand_scan); | 2689 | EXPORT_SYMBOL_GPL (nand_scan); |
2559 | EXPORT_SYMBOL (nand_release); | 2690 | EXPORT_SYMBOL_GPL (nand_release); |
2560 | 2691 | ||
2561 | MODULE_LICENSE ("GPL"); | 2692 | MODULE_LICENSE ("GPL"); |
2562 | MODULE_AUTHOR ("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>"); | 2693 | MODULE_AUTHOR ("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>"); |
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index 9a1949751c1f..5ac2d2962220 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c | |||
@@ -6,7 +6,7 @@ | |||
6 | * | 6 | * |
7 | * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de) | 7 | * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de) |
8 | * | 8 | * |
9 | * $Id: nand_bbt.c,v 1.28 2004/11/13 10:19:09 gleixner Exp $ | 9 | * $Id: nand_bbt.c,v 1.33 2005/06/14 15:47:56 gleixner Exp $ |
10 | * | 10 | * |
11 | * This program is free software; you can redistribute it and/or modify | 11 | * This program is free software; you can redistribute it and/or modify |
12 | * it under the terms of the GNU General Public License version 2 as | 12 | * it under the terms of the GNU General Public License version 2 as |
@@ -77,7 +77,7 @@ | |||
77 | */ | 77 | */ |
78 | static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td) | 78 | static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td) |
79 | { | 79 | { |
80 | int i, end; | 80 | int i, end = 0; |
81 | uint8_t *p = buf; | 81 | uint8_t *p = buf; |
82 | 82 | ||
83 | end = paglen + td->offs; | 83 | end = paglen + td->offs; |
@@ -95,9 +95,9 @@ static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_des | |||
95 | return -1; | 95 | return -1; |
96 | } | 96 | } |
97 | 97 | ||
98 | p += td->len; | ||
99 | end += td->len; | ||
100 | if (td->options & NAND_BBT_SCANEMPTY) { | 98 | if (td->options & NAND_BBT_SCANEMPTY) { |
99 | p += td->len; | ||
100 | end += td->len; | ||
101 | for (i = end; i < len; i++) { | 101 | for (i = end; i < len; i++) { |
102 | if (*p++ != 0xff) | 102 | if (*p++ != 0xff) |
103 | return -1; | 103 | return -1; |
@@ -106,6 +106,32 @@ static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_des | |||
106 | return 0; | 106 | return 0; |
107 | } | 107 | } |
108 | 108 | ||
109 | /** | ||
110 | * check_short_pattern - [GENERIC] check if a pattern is in the buffer | ||
111 | * @buf: the buffer to search | ||
112 | * @len: the length of buffer to search | ||
113 | * @paglen: the pagelength | ||
114 | * @td: search pattern descriptor | ||
115 | * | ||
116 | * Check for a pattern at the given place. Used to search bad block | ||
117 | * tables and good / bad block identifiers. Same as check_pattern, but | ||
118 | * no optional empty check and the pattern is expected to start | ||
119 | * at offset 0. | ||
120 | * | ||
121 | */ | ||
122 | static int check_short_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td) | ||
123 | { | ||
124 | int i; | ||
125 | uint8_t *p = buf; | ||
126 | |||
127 | /* Compare the pattern */ | ||
128 | for (i = 0; i < td->len; i++) { | ||
129 | if (p[i] != td->pattern[i]) | ||
130 | return -1; | ||
131 | } | ||
132 | return 0; | ||
133 | } | ||
134 | |||
109 | /** | 135 | /** |
110 | * read_bbt - [GENERIC] Read the bad block table starting from page | 136 | * read_bbt - [GENERIC] Read the bad block table starting from page |
111 | * @mtd: MTD device structure | 137 | * @mtd: MTD device structure |
@@ -252,7 +278,7 @@ static int read_abs_bbts (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_de | |||
252 | * Create a bad block table by scanning the device | 278 | * Create a bad block table by scanning the device |
253 | * for the given good/bad block identify pattern | 279 | * for the given good/bad block identify pattern |
254 | */ | 280 | */ |
255 | static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip) | 281 | static int create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip) |
256 | { | 282 | { |
257 | struct nand_chip *this = mtd->priv; | 283 | struct nand_chip *this = mtd->priv; |
258 | int i, j, numblocks, len, scanlen; | 284 | int i, j, numblocks, len, scanlen; |
@@ -270,9 +296,17 @@ static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc | |||
270 | else | 296 | else |
271 | len = 1; | 297 | len = 1; |
272 | } | 298 | } |
273 | scanlen = mtd->oobblock + mtd->oobsize; | 299 | |
274 | readlen = len * mtd->oobblock; | 300 | if (!(bd->options & NAND_BBT_SCANEMPTY)) { |
275 | ooblen = len * mtd->oobsize; | 301 | /* We need only read few bytes from the OOB area */ |
302 | scanlen = ooblen = 0; | ||
303 | readlen = bd->len; | ||
304 | } else { | ||
305 | /* Full page content should be read */ | ||
306 | scanlen = mtd->oobblock + mtd->oobsize; | ||
307 | readlen = len * mtd->oobblock; | ||
308 | ooblen = len * mtd->oobsize; | ||
309 | } | ||
276 | 310 | ||
277 | if (chip == -1) { | 311 | if (chip == -1) { |
278 | /* Note that numblocks is 2 * (real numblocks) here, see i+=2 below as it | 312 | /* Note that numblocks is 2 * (real numblocks) here, see i+=2 below as it |
@@ -284,7 +318,7 @@ static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc | |||
284 | if (chip >= this->numchips) { | 318 | if (chip >= this->numchips) { |
285 | printk (KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n", | 319 | printk (KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n", |
286 | chip + 1, this->numchips); | 320 | chip + 1, this->numchips); |
287 | return; | 321 | return -EINVAL; |
288 | } | 322 | } |
289 | numblocks = this->chipsize >> (this->bbt_erase_shift - 1); | 323 | numblocks = this->chipsize >> (this->bbt_erase_shift - 1); |
290 | startblock = chip * numblocks; | 324 | startblock = chip * numblocks; |
@@ -293,18 +327,41 @@ static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc | |||
293 | } | 327 | } |
294 | 328 | ||
295 | for (i = startblock; i < numblocks;) { | 329 | for (i = startblock; i < numblocks;) { |
296 | nand_read_raw (mtd, buf, from, readlen, ooblen); | 330 | int ret; |
331 | |||
332 | if (bd->options & NAND_BBT_SCANEMPTY) | ||
333 | if ((ret = nand_read_raw (mtd, buf, from, readlen, ooblen))) | ||
334 | return ret; | ||
335 | |||
297 | for (j = 0; j < len; j++) { | 336 | for (j = 0; j < len; j++) { |
298 | if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) { | 337 | if (!(bd->options & NAND_BBT_SCANEMPTY)) { |
299 | this->bbt[i >> 3] |= 0x03 << (i & 0x6); | 338 | size_t retlen; |
300 | printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n", | 339 | |
301 | i >> 1, (unsigned int) from); | 340 | /* No need to read pages fully, just read required OOB bytes */ |
302 | break; | 341 | ret = mtd->read_oob(mtd, from + j * mtd->oobblock + bd->offs, |
342 | readlen, &retlen, &buf[0]); | ||
343 | if (ret) | ||
344 | return ret; | ||
345 | |||
346 | if (check_short_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) { | ||
347 | this->bbt[i >> 3] |= 0x03 << (i & 0x6); | ||
348 | printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n", | ||
349 | i >> 1, (unsigned int) from); | ||
350 | break; | ||
351 | } | ||
352 | } else { | ||
353 | if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) { | ||
354 | this->bbt[i >> 3] |= 0x03 << (i & 0x6); | ||
355 | printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n", | ||
356 | i >> 1, (unsigned int) from); | ||
357 | break; | ||
358 | } | ||
303 | } | 359 | } |
304 | } | 360 | } |
305 | i += 2; | 361 | i += 2; |
306 | from += (1 << this->bbt_erase_shift); | 362 | from += (1 << this->bbt_erase_shift); |
307 | } | 363 | } |
364 | return 0; | ||
308 | } | 365 | } |
309 | 366 | ||
310 | /** | 367 | /** |
@@ -589,14 +646,12 @@ write: | |||
589 | * The function creates a memory based bbt by scanning the device | 646 | * The function creates a memory based bbt by scanning the device |
590 | * for manufacturer / software marked good / bad blocks | 647 | * for manufacturer / software marked good / bad blocks |
591 | */ | 648 | */ |
592 | static int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd) | 649 | static inline int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd) |
593 | { | 650 | { |
594 | struct nand_chip *this = mtd->priv; | 651 | struct nand_chip *this = mtd->priv; |
595 | 652 | ||
596 | /* Ensure that we only scan for the pattern and nothing else */ | 653 | bd->options &= ~NAND_BBT_SCANEMPTY; |
597 | bd->options = 0; | 654 | return create_bbt (mtd, this->data_buf, bd, -1); |
598 | create_bbt (mtd, this->data_buf, bd, -1); | ||
599 | return 0; | ||
600 | } | 655 | } |
601 | 656 | ||
602 | /** | 657 | /** |
@@ -808,8 +863,14 @@ int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd) | |||
808 | /* If no primary table decriptor is given, scan the device | 863 | /* If no primary table decriptor is given, scan the device |
809 | * to build a memory based bad block table | 864 | * to build a memory based bad block table |
810 | */ | 865 | */ |
811 | if (!td) | 866 | if (!td) { |
812 | return nand_memory_bbt(mtd, bd); | 867 | if ((res = nand_memory_bbt(mtd, bd))) { |
868 | printk (KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n"); | ||
869 | kfree (this->bbt); | ||
870 | this->bbt = NULL; | ||
871 | } | ||
872 | return res; | ||
873 | } | ||
813 | 874 | ||
814 | /* Allocate a temporary buffer for one eraseblock incl. oob */ | 875 | /* Allocate a temporary buffer for one eraseblock incl. oob */ |
815 | len = (1 << this->bbt_erase_shift); | 876 | len = (1 << this->bbt_erase_shift); |
@@ -904,14 +965,11 @@ out: | |||
904 | } | 965 | } |
905 | 966 | ||
906 | /* Define some generic bad / good block scan pattern which are used | 967 | /* Define some generic bad / good block scan pattern which are used |
907 | * while scanning a device for factory marked good / bad blocks | 968 | * while scanning a device for factory marked good / bad blocks. */ |
908 | * | ||
909 | * The memory based patterns just | ||
910 | */ | ||
911 | static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; | 969 | static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; |
912 | 970 | ||
913 | static struct nand_bbt_descr smallpage_memorybased = { | 971 | static struct nand_bbt_descr smallpage_memorybased = { |
914 | .options = 0, | 972 | .options = NAND_BBT_SCAN2NDPAGE, |
915 | .offs = 5, | 973 | .offs = 5, |
916 | .len = 1, | 974 | .len = 1, |
917 | .pattern = scan_ff_pattern | 975 | .pattern = scan_ff_pattern |
@@ -1042,7 +1100,7 @@ int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt) | |||
1042 | res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03; | 1100 | res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03; |
1043 | 1101 | ||
1044 | DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n", | 1102 | DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n", |
1045 | (unsigned int)offs, res, block >> 1); | 1103 | (unsigned int)offs, block >> 1, res); |
1046 | 1104 | ||
1047 | switch ((int)res) { | 1105 | switch ((int)res) { |
1048 | case 0x00: return 0; | 1106 | case 0x00: return 0; |
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index 2d8c4321275b..efe246961b69 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c | |||
@@ -2,8 +2,8 @@ | |||
2 | * drivers/mtd/nandids.c | 2 | * drivers/mtd/nandids.c |
3 | * | 3 | * |
4 | * Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de) | 4 | * Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de) |
5 | * | 5 | * |
6 | * $Id: nand_ids.c,v 1.10 2004/05/26 13:40:12 gleixner Exp $ | 6 | * $Id: nand_ids.c,v 1.14 2005/06/23 09:38:50 gleixner Exp $ |
7 | * | 7 | * |
8 | * This program is free software; you can redistribute it and/or modify | 8 | * This program is free software; you can redistribute it and/or modify |
9 | * it under the terms of the GNU General Public License version 2 as | 9 | * it under the terms of the GNU General Public License version 2 as |
@@ -56,17 +56,24 @@ struct nand_flash_dev nand_flash_ids[] = { | |||
56 | {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16}, | 56 | {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16}, |
57 | 57 | ||
58 | {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0}, | 58 | {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0}, |
59 | {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0}, | ||
59 | {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0}, | 60 | {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0}, |
60 | {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16}, | 61 | {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16}, |
62 | {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16}, | ||
61 | {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16}, | 63 | {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16}, |
64 | {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16}, | ||
62 | 65 | ||
63 | {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0}, | 66 | {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0}, |
64 | 67 | ||
65 | {"NAND 512MiB 3,3V 8-bit", 0xDC, 512, 512, 0x4000, 0}, | ||
66 | |||
67 | /* These are the new chips with large page size. The pagesize | 68 | /* These are the new chips with large page size. The pagesize |
68 | * and the erasesize is determined from the extended id bytes | 69 | * and the erasesize is determined from the extended id bytes |
69 | */ | 70 | */ |
71 | /*512 Megabit */ | ||
72 | {"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, | ||
73 | {"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, | ||
74 | {"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, | ||
75 | {"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, | ||
76 | |||
70 | /* 1 Gigabit */ | 77 | /* 1 Gigabit */ |
71 | {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, | 78 | {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, |
72 | {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, | 79 | {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, |
@@ -103,7 +110,7 @@ struct nand_flash_dev nand_flash_ids[] = { | |||
103 | * Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go | 110 | * Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go |
104 | * There are more speed improvements for reads and writes possible, but not implemented now | 111 | * There are more speed improvements for reads and writes possible, but not implemented now |
105 | */ | 112 | */ |
106 | {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY}, | 113 | {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH}, |
107 | 114 | ||
108 | {NULL,} | 115 | {NULL,} |
109 | }; | 116 | }; |
@@ -118,6 +125,7 @@ struct nand_manufacturers nand_manuf_ids[] = { | |||
118 | {NAND_MFR_NATIONAL, "National"}, | 125 | {NAND_MFR_NATIONAL, "National"}, |
119 | {NAND_MFR_RENESAS, "Renesas"}, | 126 | {NAND_MFR_RENESAS, "Renesas"}, |
120 | {NAND_MFR_STMICRO, "ST Micro"}, | 127 | {NAND_MFR_STMICRO, "ST Micro"}, |
128 | {NAND_MFR_HYNIX, "Hynix"}, | ||
121 | {0x0, "Unknown"} | 129 | {0x0, "Unknown"} |
122 | }; | 130 | }; |
123 | 131 | ||
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 13feefd7d8ca..754b6ed7ce14 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c | |||
@@ -22,7 +22,7 @@ | |||
22 | * along with this program; if not, write to the Free Software | 22 | * along with this program; if not, write to the Free Software |
23 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA | 23 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA |
24 | * | 24 | * |
25 | * $Id: nandsim.c,v 1.7 2004/12/06 11:53:06 dedekind Exp $ | 25 | * $Id: nandsim.c,v 1.8 2005/03/19 15:33:56 dedekind Exp $ |
26 | */ | 26 | */ |
27 | 27 | ||
28 | #include <linux/config.h> | 28 | #include <linux/config.h> |
@@ -1484,33 +1484,6 @@ ns_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) | |||
1484 | } | 1484 | } |
1485 | 1485 | ||
1486 | /* | 1486 | /* |
1487 | * Having only NAND chip IDs we call nand_scan which detects NAND flash | ||
1488 | * parameters and then calls scan_bbt in order to scan/find/build the | ||
1489 | * NAND flash bad block table. But since at that moment the NAND flash | ||
1490 | * image isn't allocated in the simulator, errors arise. To avoid this | ||
1491 | * we redefine the scan_bbt callback and initialize the nandsim structure | ||
1492 | * before the flash media scanning. | ||
1493 | */ | ||
1494 | int ns_scan_bbt(struct mtd_info *mtd) | ||
1495 | { | ||
1496 | struct nand_chip *chip = (struct nand_chip *)mtd->priv; | ||
1497 | struct nandsim *ns = (struct nandsim *)(chip->priv); | ||
1498 | int retval; | ||
1499 | |||
1500 | if (!NS_IS_INITIALIZED(ns)) | ||
1501 | if ((retval = init_nandsim(mtd)) != 0) { | ||
1502 | NS_ERR("scan_bbt: can't initialize the nandsim structure\n"); | ||
1503 | return retval; | ||
1504 | } | ||
1505 | if ((retval = nand_default_bbt(mtd)) != 0) { | ||
1506 | free_nandsim(ns); | ||
1507 | return retval; | ||
1508 | } | ||
1509 | |||
1510 | return 0; | ||
1511 | } | ||
1512 | |||
1513 | /* | ||
1514 | * Module initialization function | 1487 | * Module initialization function |
1515 | */ | 1488 | */ |
1516 | int __init ns_init_module(void) | 1489 | int __init ns_init_module(void) |
@@ -1544,7 +1517,6 @@ int __init ns_init_module(void) | |||
1544 | chip->hwcontrol = ns_hwcontrol; | 1517 | chip->hwcontrol = ns_hwcontrol; |
1545 | chip->read_byte = ns_nand_read_byte; | 1518 | chip->read_byte = ns_nand_read_byte; |
1546 | chip->dev_ready = ns_device_ready; | 1519 | chip->dev_ready = ns_device_ready; |
1547 | chip->scan_bbt = ns_scan_bbt; | ||
1548 | chip->write_byte = ns_nand_write_byte; | 1520 | chip->write_byte = ns_nand_write_byte; |
1549 | chip->write_buf = ns_nand_write_buf; | 1521 | chip->write_buf = ns_nand_write_buf; |
1550 | chip->read_buf = ns_nand_read_buf; | 1522 | chip->read_buf = ns_nand_read_buf; |
@@ -1552,6 +1524,7 @@ int __init ns_init_module(void) | |||
1552 | chip->write_word = ns_nand_write_word; | 1524 | chip->write_word = ns_nand_write_word; |
1553 | chip->read_word = ns_nand_read_word; | 1525 | chip->read_word = ns_nand_read_word; |
1554 | chip->eccmode = NAND_ECC_SOFT; | 1526 | chip->eccmode = NAND_ECC_SOFT; |
1527 | chip->options |= NAND_SKIP_BBTSCAN; | ||
1555 | 1528 | ||
1556 | /* | 1529 | /* |
1557 | * Perform minimum nandsim structure initialization to handle | 1530 | * Perform minimum nandsim structure initialization to handle |
@@ -1580,6 +1553,16 @@ int __init ns_init_module(void) | |||
1580 | goto error; | 1553 | goto error; |
1581 | } | 1554 | } |
1582 | 1555 | ||
1556 | if ((retval = init_nandsim(nsmtd)) != 0) { | ||
1557 | NS_ERR("scan_bbt: can't initialize the nandsim structure\n"); | ||
1558 | goto error; | ||
1559 | } | ||
1560 | |||
1561 | if ((retval = nand_default_bbt(nsmtd)) != 0) { | ||
1562 | free_nandsim(nand); | ||
1563 | goto error; | ||
1564 | } | ||
1565 | |||
1583 | /* Register NAND as one big partition */ | 1566 | /* Register NAND as one big partition */ |
1584 | add_mtd_partitions(nsmtd, &nand->part, 1); | 1567 | add_mtd_partitions(nsmtd, &nand->part, 1); |
1585 | 1568 | ||
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c index 02305a2adca7..031051cbde76 100644 --- a/drivers/mtd/nand/rtc_from4.c +++ b/drivers/mtd/nand/rtc_from4.c | |||
@@ -6,7 +6,7 @@ | |||
6 | * Derived from drivers/mtd/nand/spia.c | 6 | * Derived from drivers/mtd/nand/spia.c |
7 | * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) | 7 | * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) |
8 | * | 8 | * |
9 | * $Id: rtc_from4.c,v 1.7 2004/11/04 12:53:10 gleixner Exp $ | 9 | * $Id: rtc_from4.c,v 1.9 2005/01/24 20:40:11 dmarlin Exp $ |
10 | * | 10 | * |
11 | * This program is free software; you can redistribute it and/or modify | 11 | * This program is free software; you can redistribute it and/or modify |
12 | * it under the terms of the GNU General Public License version 2 as | 12 | * it under the terms of the GNU General Public License version 2 as |
@@ -83,13 +83,18 @@ static struct mtd_info *rtc_from4_mtd = NULL; | |||
83 | #define RTC_FROM4_RS_ECC_CHK (RTC_FROM4_NAND_ADDR_FPGA | 0x00000070) | 83 | #define RTC_FROM4_RS_ECC_CHK (RTC_FROM4_NAND_ADDR_FPGA | 0x00000070) |
84 | #define RTC_FROM4_RS_ECC_CHK_ERROR (1 << 7) | 84 | #define RTC_FROM4_RS_ECC_CHK_ERROR (1 << 7) |
85 | 85 | ||
86 | #define ERR_STAT_ECC_AVAILABLE 0x20 | ||
87 | |||
86 | /* Undefine for software ECC */ | 88 | /* Undefine for software ECC */ |
87 | #define RTC_FROM4_HWECC 1 | 89 | #define RTC_FROM4_HWECC 1 |
88 | 90 | ||
91 | /* Define as 1 for no virtual erase blocks (in JFFS2) */ | ||
92 | #define RTC_FROM4_NO_VIRTBLOCKS 0 | ||
93 | |||
89 | /* | 94 | /* |
90 | * Module stuff | 95 | * Module stuff |
91 | */ | 96 | */ |
92 | static void __iomem *rtc_from4_fio_base = P2SEGADDR(RTC_FROM4_FIO_BASE); | 97 | static void __iomem *rtc_from4_fio_base = (void *)P2SEGADDR(RTC_FROM4_FIO_BASE); |
93 | 98 | ||
94 | const static struct mtd_partition partition_info[] = { | 99 | const static struct mtd_partition partition_info[] = { |
95 | { | 100 | { |
@@ -267,7 +272,6 @@ static void rtc_from4_nand_select_chip(struct mtd_info *mtd, int chip) | |||
267 | } | 272 | } |
268 | 273 | ||
269 | 274 | ||
270 | |||
271 | /* | 275 | /* |
272 | * rtc_from4_nand_device_ready - hardware specific ready/busy check | 276 | * rtc_from4_nand_device_ready - hardware specific ready/busy check |
273 | * @mtd: MTD device structure | 277 | * @mtd: MTD device structure |
@@ -286,6 +290,40 @@ static int rtc_from4_nand_device_ready(struct mtd_info *mtd) | |||
286 | 290 | ||
287 | } | 291 | } |
288 | 292 | ||
293 | |||
294 | /* | ||
295 | * deplete - code to perform device recovery in case there was a power loss | ||
296 | * @mtd: MTD device structure | ||
297 | * @chip: Chip to select (0 == slot 3, 1 == slot 4) | ||
298 | * | ||
299 | * If there was a sudden loss of power during an erase operation, a | ||
300 | * "device recovery" operation must be performed when power is restored | ||
301 | * to ensure correct operation. This routine performs the required steps | ||
302 | * for the requested chip. | ||
303 | * | ||
304 | * See page 86 of the data sheet for details. | ||
305 | * | ||
306 | */ | ||
307 | static void deplete(struct mtd_info *mtd, int chip) | ||
308 | { | ||
309 | struct nand_chip *this = mtd->priv; | ||
310 | |||
311 | /* wait until device is ready */ | ||
312 | while (!this->dev_ready(mtd)); | ||
313 | |||
314 | this->select_chip(mtd, chip); | ||
315 | |||
316 | /* Send the commands for device recovery, phase 1 */ | ||
317 | this->cmdfunc (mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0000); | ||
318 | this->cmdfunc (mtd, NAND_CMD_DEPLETE2, -1, -1); | ||
319 | |||
320 | /* Send the commands for device recovery, phase 2 */ | ||
321 | this->cmdfunc (mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0004); | ||
322 | this->cmdfunc (mtd, NAND_CMD_DEPLETE2, -1, -1); | ||
323 | |||
324 | } | ||
325 | |||
326 | |||
289 | #ifdef RTC_FROM4_HWECC | 327 | #ifdef RTC_FROM4_HWECC |
290 | /* | 328 | /* |
291 | * rtc_from4_enable_hwecc - hardware specific hardware ECC enable function | 329 | * rtc_from4_enable_hwecc - hardware specific hardware ECC enable function |
@@ -329,6 +367,7 @@ static void rtc_from4_enable_hwecc(struct mtd_info *mtd, int mode) | |||
329 | 367 | ||
330 | } | 368 | } |
331 | 369 | ||
370 | |||
332 | /* | 371 | /* |
333 | * rtc_from4_calculate_ecc - hardware specific code to read ECC code | 372 | * rtc_from4_calculate_ecc - hardware specific code to read ECC code |
334 | * @mtd: MTD device structure | 373 | * @mtd: MTD device structure |
@@ -356,6 +395,7 @@ static void rtc_from4_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_c | |||
356 | ecc_code[7] |= 0x0f; /* set the last four bits (not used) */ | 395 | ecc_code[7] |= 0x0f; /* set the last four bits (not used) */ |
357 | } | 396 | } |
358 | 397 | ||
398 | |||
359 | /* | 399 | /* |
360 | * rtc_from4_correct_data - hardware specific code to correct data using ECC code | 400 | * rtc_from4_correct_data - hardware specific code to correct data using ECC code |
361 | * @mtd: MTD device structure | 401 | * @mtd: MTD device structure |
@@ -365,16 +405,14 @@ static void rtc_from4_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_c | |||
365 | * | 405 | * |
366 | * The FPGA tells us fast, if there's an error or not. If no, we go back happy | 406 | * The FPGA tells us fast, if there's an error or not. If no, we go back happy |
367 | * else we read the ecc results from the fpga and call the rs library to decode | 407 | * else we read the ecc results from the fpga and call the rs library to decode |
368 | * and hopefully correct the error | 408 | * and hopefully correct the error. |
369 | * | 409 | * |
370 | * For now I use the code, which we read from the FLASH to use the RS lib, | ||
371 | * as the syndrom conversion has a unresolved issue. | ||
372 | */ | 410 | */ |
373 | static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_char *ecc1, u_char *ecc2) | 411 | static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_char *ecc1, u_char *ecc2) |
374 | { | 412 | { |
375 | int i, j, res; | 413 | int i, j, res; |
376 | unsigned short status; | 414 | unsigned short status; |
377 | uint16_t par[6], syn[6], tmp; | 415 | uint16_t par[6], syn[6]; |
378 | uint8_t ecc[8]; | 416 | uint8_t ecc[8]; |
379 | volatile unsigned short *rs_ecc; | 417 | volatile unsigned short *rs_ecc; |
380 | 418 | ||
@@ -416,15 +454,86 @@ static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_cha | |||
416 | } | 454 | } |
417 | 455 | ||
418 | /* Let the library code do its magic.*/ | 456 | /* Let the library code do its magic.*/ |
419 | res = decode_rs8(rs_decoder, buf, par, 512, syn, 0, NULL, 0xff, NULL); | 457 | res = decode_rs8(rs_decoder, (uint8_t *)buf, par, 512, syn, 0, NULL, 0xff, NULL); |
420 | if (res > 0) { | 458 | if (res > 0) { |
421 | DEBUG (MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: " | 459 | DEBUG (MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: " |
422 | "ECC corrected %d errors on read\n", res); | 460 | "ECC corrected %d errors on read\n", res); |
423 | } | 461 | } |
424 | return res; | 462 | return res; |
425 | } | 463 | } |
464 | |||
465 | |||
466 | /** | ||
467 | * rtc_from4_errstat - perform additional error status checks | ||
468 | * @mtd: MTD device structure | ||
469 | * @this: NAND chip structure | ||
470 | * @state: state or the operation | ||
471 | * @status: status code returned from read status | ||
472 | * @page: startpage inside the chip, must be called with (page & this->pagemask) | ||
473 | * | ||
474 | * Perform additional error status checks on erase and write failures | ||
475 | * to determine if errors are correctable. For this device, correctable | ||
476 | * 1-bit errors on erase and write are considered acceptable. | ||
477 | * | ||
478 | * note: see pages 34..37 of data sheet for details. | ||
479 | * | ||
480 | */ | ||
481 | static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page) | ||
482 | { | ||
483 | int er_stat=0; | ||
484 | int rtn, retlen; | ||
485 | size_t len; | ||
486 | uint8_t *buf; | ||
487 | int i; | ||
488 | |||
489 | this->cmdfunc (mtd, NAND_CMD_STATUS_CLEAR, -1, -1); | ||
490 | |||
491 | if (state == FL_ERASING) { | ||
492 | for (i=0; i<4; i++) { | ||
493 | if (status & 1<<(i+1)) { | ||
494 | this->cmdfunc (mtd, (NAND_CMD_STATUS_ERROR + i + 1), -1, -1); | ||
495 | rtn = this->read_byte(mtd); | ||
496 | this->cmdfunc (mtd, NAND_CMD_STATUS_RESET, -1, -1); | ||
497 | if (!(rtn & ERR_STAT_ECC_AVAILABLE)) { | ||
498 | er_stat |= 1<<(i+1); /* err_ecc_not_avail */ | ||
499 | } | ||
500 | } | ||
501 | } | ||
502 | } else if (state == FL_WRITING) { | ||
503 | /* single bank write logic */ | ||
504 | this->cmdfunc (mtd, NAND_CMD_STATUS_ERROR, -1, -1); | ||
505 | rtn = this->read_byte(mtd); | ||
506 | this->cmdfunc (mtd, NAND_CMD_STATUS_RESET, -1, -1); | ||
507 | if (!(rtn & ERR_STAT_ECC_AVAILABLE)) { | ||
508 | er_stat |= 1<<1; /* err_ecc_not_avail */ | ||
509 | } else { | ||
510 | len = mtd->oobblock; | ||
511 | buf = kmalloc (len, GFP_KERNEL); | ||
512 | if (!buf) { | ||
513 | printk (KERN_ERR "rtc_from4_errstat: Out of memory!\n"); | ||
514 | er_stat = 1; /* if we can't check, assume failed */ | ||
515 | } else { | ||
516 | /* recovery read */ | ||
517 | /* page read */ | ||
518 | rtn = nand_do_read_ecc (mtd, page, len, &retlen, buf, NULL, this->autooob, 1); | ||
519 | if (rtn) { /* if read failed or > 1-bit error corrected */ | ||
520 | er_stat |= 1<<1; /* ECC read failed */ | ||
521 | } | ||
522 | kfree(buf); | ||
523 | } | ||
524 | } | ||
525 | } | ||
526 | |||
527 | rtn = status; | ||
528 | if (er_stat == 0) { /* if ECC is available */ | ||
529 | rtn = (status & ~NAND_STATUS_FAIL); /* clear the error bit */ | ||
530 | } | ||
531 | |||
532 | return rtn; | ||
533 | } | ||
426 | #endif | 534 | #endif |
427 | 535 | ||
536 | |||
428 | /* | 537 | /* |
429 | * Main initialization routine | 538 | * Main initialization routine |
430 | */ | 539 | */ |
@@ -432,6 +541,7 @@ int __init rtc_from4_init (void) | |||
432 | { | 541 | { |
433 | struct nand_chip *this; | 542 | struct nand_chip *this; |
434 | unsigned short bcr1, bcr2, wcr2; | 543 | unsigned short bcr1, bcr2, wcr2; |
544 | int i; | ||
435 | 545 | ||
436 | /* Allocate memory for MTD device structure and private data */ | 546 | /* Allocate memory for MTD device structure and private data */ |
437 | rtc_from4_mtd = kmalloc(sizeof(struct mtd_info) + sizeof (struct nand_chip), | 547 | rtc_from4_mtd = kmalloc(sizeof(struct mtd_info) + sizeof (struct nand_chip), |
@@ -483,6 +593,8 @@ int __init rtc_from4_init (void) | |||
483 | 593 | ||
484 | this->eccmode = NAND_ECC_HW8_512; | 594 | this->eccmode = NAND_ECC_HW8_512; |
485 | this->options |= NAND_HWECC_SYNDROME; | 595 | this->options |= NAND_HWECC_SYNDROME; |
596 | /* return the status of extra status and ECC checks */ | ||
597 | this->errstat = rtc_from4_errstat; | ||
486 | /* set the nand_oobinfo to support FPGA H/W error detection */ | 598 | /* set the nand_oobinfo to support FPGA H/W error detection */ |
487 | this->autooob = &rtc_from4_nand_oobinfo; | 599 | this->autooob = &rtc_from4_nand_oobinfo; |
488 | this->enable_hwecc = rtc_from4_enable_hwecc; | 600 | this->enable_hwecc = rtc_from4_enable_hwecc; |
@@ -504,6 +616,18 @@ int __init rtc_from4_init (void) | |||
504 | return -ENXIO; | 616 | return -ENXIO; |
505 | } | 617 | } |
506 | 618 | ||
619 | /* Perform 'device recovery' for each chip in case there was a power loss. */ | ||
620 | for (i=0; i < this->numchips; i++) { | ||
621 | deplete(rtc_from4_mtd, i); | ||
622 | } | ||
623 | |||
624 | #if RTC_FROM4_NO_VIRTBLOCKS | ||
625 | /* use a smaller erase block to minimize wasted space when a block is bad */ | ||
626 | /* note: this uses eight times as much RAM as using the default and makes */ | ||
627 | /* mounts take four times as long. */ | ||
628 | rtc_from4_mtd->flags |= MTD_NO_VIRTBLOCKS; | ||
629 | #endif | ||
630 | |||
507 | /* Register the partitions */ | 631 | /* Register the partitions */ |
508 | add_mtd_partitions(rtc_from4_mtd, partition_info, NUM_PARTITIONS); | 632 | add_mtd_partitions(rtc_from4_mtd, partition_info, NUM_PARTITIONS); |
509 | 633 | ||
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index d05e9b97947d..891e3a1b9110 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c | |||
@@ -1,17 +1,24 @@ | |||
1 | /* linux/drivers/mtd/nand/s3c2410.c | 1 | /* linux/drivers/mtd/nand/s3c2410.c |
2 | * | 2 | * |
3 | * Copyright (c) 2004 Simtec Electronics | 3 | * Copyright (c) 2004,2005 Simtec Electronics |
4 | * Ben Dooks <ben@simtec.co.uk> | 4 | * http://www.simtec.co.uk/products/SWLINUX/ |
5 | * Ben Dooks <ben@simtec.co.uk> | ||
5 | * | 6 | * |
6 | * Samsung S3C2410 NAND driver | 7 | * Samsung S3C2410/S3C240 NAND driver |
7 | * | 8 | * |
8 | * Changelog: | 9 | * Changelog: |
9 | * 21-Sep-2004 BJD Initial version | 10 | * 21-Sep-2004 BJD Initial version |
10 | * 23-Sep-2004 BJD Mulitple device support | 11 | * 23-Sep-2004 BJD Mulitple device support |
11 | * 28-Sep-2004 BJD Fixed ECC placement for Hardware mode | 12 | * 28-Sep-2004 BJD Fixed ECC placement for Hardware mode |
12 | * 12-Oct-2004 BJD Fixed errors in use of platform data | 13 | * 12-Oct-2004 BJD Fixed errors in use of platform data |
14 | * 18-Feb-2005 BJD Fix sparse errors | ||
15 | * 14-Mar-2005 BJD Applied tglx's code reduction patch | ||
16 | * 02-May-2005 BJD Fixed s3c2440 support | ||
17 | * 02-May-2005 BJD Reduced hwcontrol decode | ||
18 | * 20-Jun-2005 BJD Updated s3c2440 support, fixed timing bug | ||
19 | * 08-Jul-2005 BJD Fix OOPS when no platform data supplied | ||
13 | * | 20 | * |
14 | * $Id: s3c2410.c,v 1.7 2005/01/05 18:05:14 dwmw2 Exp $ | 21 | * $Id: s3c2410.c,v 1.14 2005/07/06 20:05:06 bjd Exp $ |
15 | * | 22 | * |
16 | * This program is free software; you can redistribute it and/or modify | 23 | * This program is free software; you can redistribute it and/or modify |
17 | * it under the terms of the GNU General Public License as published by | 24 | * it under the terms of the GNU General Public License as published by |
@@ -69,10 +76,10 @@ static int hardware_ecc = 0; | |||
69 | */ | 76 | */ |
70 | 77 | ||
71 | static struct nand_oobinfo nand_hw_eccoob = { | 78 | static struct nand_oobinfo nand_hw_eccoob = { |
72 | .useecc = MTD_NANDECC_AUTOPLACE, | 79 | .useecc = MTD_NANDECC_AUTOPLACE, |
73 | .eccbytes = 3, | 80 | .eccbytes = 3, |
74 | .eccpos = {0, 1, 2 }, | 81 | .eccpos = {0, 1, 2 }, |
75 | .oobfree = { {8, 8} } | 82 | .oobfree = { {8, 8} } |
76 | }; | 83 | }; |
77 | 84 | ||
78 | /* controller and mtd information */ | 85 | /* controller and mtd information */ |
@@ -99,8 +106,10 @@ struct s3c2410_nand_info { | |||
99 | struct device *device; | 106 | struct device *device; |
100 | struct resource *area; | 107 | struct resource *area; |
101 | struct clk *clk; | 108 | struct clk *clk; |
102 | void *regs; | 109 | void __iomem *regs; |
103 | int mtd_count; | 110 | int mtd_count; |
111 | |||
112 | unsigned char is_s3c2440; | ||
104 | }; | 113 | }; |
105 | 114 | ||
106 | /* conversion functions */ | 115 | /* conversion functions */ |
@@ -165,12 +174,12 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info, | |||
165 | /* calculate the timing information for the controller */ | 174 | /* calculate the timing information for the controller */ |
166 | 175 | ||
167 | if (plat != NULL) { | 176 | if (plat != NULL) { |
168 | tacls = s3c2410_nand_calc_rate(plat->tacls, clkrate, 8); | 177 | tacls = s3c2410_nand_calc_rate(plat->tacls, clkrate, 4); |
169 | twrph0 = s3c2410_nand_calc_rate(plat->twrph0, clkrate, 8); | 178 | twrph0 = s3c2410_nand_calc_rate(plat->twrph0, clkrate, 8); |
170 | twrph1 = s3c2410_nand_calc_rate(plat->twrph1, clkrate, 8); | 179 | twrph1 = s3c2410_nand_calc_rate(plat->twrph1, clkrate, 8); |
171 | } else { | 180 | } else { |
172 | /* default timings */ | 181 | /* default timings */ |
173 | tacls = 8; | 182 | tacls = 4; |
174 | twrph0 = 8; | 183 | twrph0 = 8; |
175 | twrph1 = 8; | 184 | twrph1 = 8; |
176 | } | 185 | } |
@@ -185,10 +194,16 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info, | |||
185 | to_ns(twrph0, clkrate), | 194 | to_ns(twrph0, clkrate), |
186 | to_ns(twrph1, clkrate)); | 195 | to_ns(twrph1, clkrate)); |
187 | 196 | ||
188 | cfg = S3C2410_NFCONF_EN; | 197 | if (!info->is_s3c2440) { |
189 | cfg |= S3C2410_NFCONF_TACLS(tacls-1); | 198 | cfg = S3C2410_NFCONF_EN; |
190 | cfg |= S3C2410_NFCONF_TWRPH0(twrph0-1); | 199 | cfg |= S3C2410_NFCONF_TACLS(tacls-1); |
191 | cfg |= S3C2410_NFCONF_TWRPH1(twrph1-1); | 200 | cfg |= S3C2410_NFCONF_TWRPH0(twrph0-1); |
201 | cfg |= S3C2410_NFCONF_TWRPH1(twrph1-1); | ||
202 | } else { | ||
203 | cfg = S3C2440_NFCONF_TACLS(tacls-1); | ||
204 | cfg |= S3C2440_NFCONF_TWRPH0(twrph0-1); | ||
205 | cfg |= S3C2440_NFCONF_TWRPH1(twrph1-1); | ||
206 | } | ||
192 | 207 | ||
193 | pr_debug(PFX "NF_CONF is 0x%lx\n", cfg); | 208 | pr_debug(PFX "NF_CONF is 0x%lx\n", cfg); |
194 | 209 | ||
@@ -203,17 +218,22 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip) | |||
203 | struct s3c2410_nand_info *info; | 218 | struct s3c2410_nand_info *info; |
204 | struct s3c2410_nand_mtd *nmtd; | 219 | struct s3c2410_nand_mtd *nmtd; |
205 | struct nand_chip *this = mtd->priv; | 220 | struct nand_chip *this = mtd->priv; |
221 | void __iomem *reg; | ||
206 | unsigned long cur; | 222 | unsigned long cur; |
223 | unsigned long bit; | ||
207 | 224 | ||
208 | nmtd = this->priv; | 225 | nmtd = this->priv; |
209 | info = nmtd->info; | 226 | info = nmtd->info; |
210 | 227 | ||
211 | cur = readl(info->regs + S3C2410_NFCONF); | 228 | bit = (info->is_s3c2440) ? S3C2440_NFCONT_nFCE : S3C2410_NFCONF_nFCE; |
229 | reg = info->regs+((info->is_s3c2440) ? S3C2440_NFCONT:S3C2410_NFCONF); | ||
230 | |||
231 | cur = readl(reg); | ||
212 | 232 | ||
213 | if (chip == -1) { | 233 | if (chip == -1) { |
214 | cur |= S3C2410_NFCONF_nFCE; | 234 | cur |= bit; |
215 | } else { | 235 | } else { |
216 | if (chip > nmtd->set->nr_chips) { | 236 | if (nmtd->set != NULL && chip > nmtd->set->nr_chips) { |
217 | printk(KERN_ERR PFX "chip %d out of range\n", chip); | 237 | printk(KERN_ERR PFX "chip %d out of range\n", chip); |
218 | return; | 238 | return; |
219 | } | 239 | } |
@@ -223,143 +243,76 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip) | |||
223 | (info->platform->select_chip)(nmtd->set, chip); | 243 | (info->platform->select_chip)(nmtd->set, chip); |
224 | } | 244 | } |
225 | 245 | ||
226 | cur &= ~S3C2410_NFCONF_nFCE; | 246 | cur &= ~bit; |
227 | } | 247 | } |
228 | 248 | ||
229 | writel(cur, info->regs + S3C2410_NFCONF); | 249 | writel(cur, reg); |
230 | } | 250 | } |
231 | 251 | ||
232 | /* command and control functions */ | 252 | /* command and control functions |
253 | * | ||
254 | * Note, these all use tglx's method of changing the IO_ADDR_W field | ||
255 | * to make the code simpler, and use the nand layer's code to issue the | ||
256 | * command and address sequences via the proper IO ports. | ||
257 | * | ||
258 | */ | ||
233 | 259 | ||
234 | static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd) | 260 | static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd) |
235 | { | 261 | { |
236 | struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); | 262 | struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); |
237 | unsigned long cur; | 263 | struct nand_chip *chip = mtd->priv; |
238 | 264 | ||
239 | switch (cmd) { | 265 | switch (cmd) { |
240 | case NAND_CTL_SETNCE: | 266 | case NAND_CTL_SETNCE: |
241 | cur = readl(info->regs + S3C2410_NFCONF); | ||
242 | cur &= ~S3C2410_NFCONF_nFCE; | ||
243 | writel(cur, info->regs + S3C2410_NFCONF); | ||
244 | break; | ||
245 | |||
246 | case NAND_CTL_CLRNCE: | 267 | case NAND_CTL_CLRNCE: |
247 | cur = readl(info->regs + S3C2410_NFCONF); | 268 | printk(KERN_ERR "%s: called for NCE\n", __FUNCTION__); |
248 | cur |= S3C2410_NFCONF_nFCE; | ||
249 | writel(cur, info->regs + S3C2410_NFCONF); | ||
250 | break; | 269 | break; |
251 | 270 | ||
252 | /* we don't need to implement these */ | ||
253 | case NAND_CTL_SETCLE: | 271 | case NAND_CTL_SETCLE: |
254 | case NAND_CTL_CLRCLE: | 272 | chip->IO_ADDR_W = info->regs + S3C2410_NFCMD; |
273 | break; | ||
274 | |||
255 | case NAND_CTL_SETALE: | 275 | case NAND_CTL_SETALE: |
256 | case NAND_CTL_CLRALE: | 276 | chip->IO_ADDR_W = info->regs + S3C2410_NFADDR; |
257 | pr_debug(PFX "s3c2410_nand_hwcontrol(%d) unusedn", cmd); | 277 | break; |
278 | |||
279 | /* NAND_CTL_CLRCLE: */ | ||
280 | /* NAND_CTL_CLRALE: */ | ||
281 | default: | ||
282 | chip->IO_ADDR_W = info->regs + S3C2410_NFDATA; | ||
258 | break; | 283 | break; |
259 | } | 284 | } |
260 | } | 285 | } |
261 | 286 | ||
262 | /* s3c2410_nand_command | 287 | /* command and control functions */ |
263 | * | ||
264 | * This function implements sending commands and the relevant address | ||
265 | * information to the chip, via the hardware controller. Since the | ||
266 | * S3C2410 generates the correct ALE/CLE signaling automatically, we | ||
267 | * do not need to use hwcontrol. | ||
268 | */ | ||
269 | 288 | ||
270 | static void s3c2410_nand_command (struct mtd_info *mtd, unsigned command, | 289 | static void s3c2440_nand_hwcontrol(struct mtd_info *mtd, int cmd) |
271 | int column, int page_addr) | ||
272 | { | 290 | { |
273 | register struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); | 291 | struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); |
274 | register struct nand_chip *this = mtd->priv; | 292 | struct nand_chip *chip = mtd->priv; |
275 | 293 | ||
276 | /* | 294 | switch (cmd) { |
277 | * Write out the command to the device. | 295 | case NAND_CTL_SETNCE: |
278 | */ | 296 | case NAND_CTL_CLRNCE: |
279 | if (command == NAND_CMD_SEQIN) { | 297 | printk(KERN_ERR "%s: called for NCE\n", __FUNCTION__); |
280 | int readcmd; | 298 | break; |
281 | |||
282 | if (column >= mtd->oobblock) { | ||
283 | /* OOB area */ | ||
284 | column -= mtd->oobblock; | ||
285 | readcmd = NAND_CMD_READOOB; | ||
286 | } else if (column < 256) { | ||
287 | /* First 256 bytes --> READ0 */ | ||
288 | readcmd = NAND_CMD_READ0; | ||
289 | } else { | ||
290 | column -= 256; | ||
291 | readcmd = NAND_CMD_READ1; | ||
292 | } | ||
293 | |||
294 | writeb(readcmd, info->regs + S3C2410_NFCMD); | ||
295 | } | ||
296 | writeb(command, info->regs + S3C2410_NFCMD); | ||
297 | 299 | ||
298 | /* Set ALE and clear CLE to start address cycle */ | 300 | case NAND_CTL_SETCLE: |
301 | chip->IO_ADDR_W = info->regs + S3C2440_NFCMD; | ||
302 | break; | ||
299 | 303 | ||
300 | if (column != -1 || page_addr != -1) { | 304 | case NAND_CTL_SETALE: |
305 | chip->IO_ADDR_W = info->regs + S3C2440_NFADDR; | ||
306 | break; | ||
301 | 307 | ||
302 | /* Serially input address */ | 308 | /* NAND_CTL_CLRCLE: */ |
303 | if (column != -1) { | 309 | /* NAND_CTL_CLRALE: */ |
304 | /* Adjust columns for 16 bit buswidth */ | ||
305 | if (this->options & NAND_BUSWIDTH_16) | ||
306 | column >>= 1; | ||
307 | writeb(column, info->regs + S3C2410_NFADDR); | ||
308 | } | ||
309 | if (page_addr != -1) { | ||
310 | writeb((unsigned char) (page_addr), info->regs + S3C2410_NFADDR); | ||
311 | writeb((unsigned char) (page_addr >> 8), info->regs + S3C2410_NFADDR); | ||
312 | /* One more address cycle for higher density devices */ | ||
313 | if (this->chipsize & 0x0c000000) | ||
314 | writeb((unsigned char) ((page_addr >> 16) & 0x0f), | ||
315 | info->regs + S3C2410_NFADDR); | ||
316 | } | ||
317 | /* Latch in address */ | ||
318 | } | ||
319 | |||
320 | /* | ||
321 | * program and erase have their own busy handlers | ||
322 | * status and sequential in needs no delay | ||
323 | */ | ||
324 | switch (command) { | ||
325 | |||
326 | case NAND_CMD_PAGEPROG: | ||
327 | case NAND_CMD_ERASE1: | ||
328 | case NAND_CMD_ERASE2: | ||
329 | case NAND_CMD_SEQIN: | ||
330 | case NAND_CMD_STATUS: | ||
331 | return; | ||
332 | |||
333 | case NAND_CMD_RESET: | ||
334 | if (this->dev_ready) | ||
335 | break; | ||
336 | |||
337 | udelay(this->chip_delay); | ||
338 | writeb(NAND_CMD_STATUS, info->regs + S3C2410_NFCMD); | ||
339 | |||
340 | while ( !(this->read_byte(mtd) & 0x40)); | ||
341 | return; | ||
342 | |||
343 | /* This applies to read commands */ | ||
344 | default: | 310 | default: |
345 | /* | 311 | chip->IO_ADDR_W = info->regs + S3C2440_NFDATA; |
346 | * If we don't have access to the busy pin, we apply the given | 312 | break; |
347 | * command delay | ||
348 | */ | ||
349 | if (!this->dev_ready) { | ||
350 | udelay (this->chip_delay); | ||
351 | return; | ||
352 | } | ||
353 | } | 313 | } |
354 | |||
355 | /* Apply this short delay always to ensure that we do wait tWB in | ||
356 | * any case on any machine. */ | ||
357 | ndelay (100); | ||
358 | /* wait until command is processed */ | ||
359 | while (!this->dev_ready(mtd)); | ||
360 | } | 314 | } |
361 | 315 | ||
362 | |||
363 | /* s3c2410_nand_devready() | 316 | /* s3c2410_nand_devready() |
364 | * | 317 | * |
365 | * returns 0 if the nand is busy, 1 if it is ready | 318 | * returns 0 if the nand is busy, 1 if it is ready |
@@ -369,9 +322,12 @@ static int s3c2410_nand_devready(struct mtd_info *mtd) | |||
369 | { | 322 | { |
370 | struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); | 323 | struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); |
371 | 324 | ||
325 | if (info->is_s3c2440) | ||
326 | return readb(info->regs + S3C2440_NFSTAT) & S3C2440_NFSTAT_READY; | ||
372 | return readb(info->regs + S3C2410_NFSTAT) & S3C2410_NFSTAT_BUSY; | 327 | return readb(info->regs + S3C2410_NFSTAT) & S3C2410_NFSTAT_BUSY; |
373 | } | 328 | } |
374 | 329 | ||
330 | |||
375 | /* ECC handling functions */ | 331 | /* ECC handling functions */ |
376 | 332 | ||
377 | static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, | 333 | static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, |
@@ -394,6 +350,12 @@ static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, | |||
394 | return -1; | 350 | return -1; |
395 | } | 351 | } |
396 | 352 | ||
353 | /* ECC functions | ||
354 | * | ||
355 | * These allow the s3c2410 and s3c2440 to use the controller's ECC | ||
356 | * generator block to ECC the data as it passes through] | ||
357 | */ | ||
358 | |||
397 | static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode) | 359 | static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode) |
398 | { | 360 | { |
399 | struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); | 361 | struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); |
@@ -404,6 +366,15 @@ static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode) | |||
404 | writel(ctrl, info->regs + S3C2410_NFCONF); | 366 | writel(ctrl, info->regs + S3C2410_NFCONF); |
405 | } | 367 | } |
406 | 368 | ||
369 | static void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode) | ||
370 | { | ||
371 | struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); | ||
372 | unsigned long ctrl; | ||
373 | |||
374 | ctrl = readl(info->regs + S3C2440_NFCONT); | ||
375 | writel(ctrl | S3C2440_NFCONT_INITECC, info->regs + S3C2440_NFCONT); | ||
376 | } | ||
377 | |||
407 | static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, | 378 | static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, |
408 | const u_char *dat, u_char *ecc_code) | 379 | const u_char *dat, u_char *ecc_code) |
409 | { | 380 | { |
@@ -420,7 +391,26 @@ static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, | |||
420 | } | 391 | } |
421 | 392 | ||
422 | 393 | ||
423 | /* over-ride the standard functions for a little more speed? */ | 394 | static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, |
395 | const u_char *dat, u_char *ecc_code) | ||
396 | { | ||
397 | struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); | ||
398 | unsigned long ecc = readl(info->regs + S3C2440_NFMECC0); | ||
399 | |||
400 | ecc_code[0] = ecc; | ||
401 | ecc_code[1] = ecc >> 8; | ||
402 | ecc_code[2] = ecc >> 16; | ||
403 | |||
404 | pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", | ||
405 | ecc_code[0], ecc_code[1], ecc_code[2]); | ||
406 | |||
407 | return 0; | ||
408 | } | ||
409 | |||
410 | |||
411 | /* over-ride the standard functions for a little more speed. We can | ||
412 | * use read/write block to move the data buffers to/from the controller | ||
413 | */ | ||
424 | 414 | ||
425 | static void s3c2410_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) | 415 | static void s3c2410_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) |
426 | { | 416 | { |
@@ -523,11 +513,10 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, | |||
523 | { | 513 | { |
524 | struct nand_chip *chip = &nmtd->chip; | 514 | struct nand_chip *chip = &nmtd->chip; |
525 | 515 | ||
526 | chip->IO_ADDR_R = (char *)info->regs + S3C2410_NFDATA; | 516 | chip->IO_ADDR_R = info->regs + S3C2410_NFDATA; |
527 | chip->IO_ADDR_W = (char *)info->regs + S3C2410_NFDATA; | 517 | chip->IO_ADDR_W = info->regs + S3C2410_NFDATA; |
528 | chip->hwcontrol = s3c2410_nand_hwcontrol; | 518 | chip->hwcontrol = s3c2410_nand_hwcontrol; |
529 | chip->dev_ready = s3c2410_nand_devready; | 519 | chip->dev_ready = s3c2410_nand_devready; |
530 | chip->cmdfunc = s3c2410_nand_command; | ||
531 | chip->write_buf = s3c2410_nand_write_buf; | 520 | chip->write_buf = s3c2410_nand_write_buf; |
532 | chip->read_buf = s3c2410_nand_read_buf; | 521 | chip->read_buf = s3c2410_nand_read_buf; |
533 | chip->select_chip = s3c2410_nand_select_chip; | 522 | chip->select_chip = s3c2410_nand_select_chip; |
@@ -536,6 +525,12 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, | |||
536 | chip->options = 0; | 525 | chip->options = 0; |
537 | chip->controller = &info->controller; | 526 | chip->controller = &info->controller; |
538 | 527 | ||
528 | if (info->is_s3c2440) { | ||
529 | chip->IO_ADDR_R = info->regs + S3C2440_NFDATA; | ||
530 | chip->IO_ADDR_W = info->regs + S3C2440_NFDATA; | ||
531 | chip->hwcontrol = s3c2440_nand_hwcontrol; | ||
532 | } | ||
533 | |||
539 | nmtd->info = info; | 534 | nmtd->info = info; |
540 | nmtd->mtd.priv = chip; | 535 | nmtd->mtd.priv = chip; |
541 | nmtd->set = set; | 536 | nmtd->set = set; |
@@ -546,6 +541,11 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, | |||
546 | chip->calculate_ecc = s3c2410_nand_calculate_ecc; | 541 | chip->calculate_ecc = s3c2410_nand_calculate_ecc; |
547 | chip->eccmode = NAND_ECC_HW3_512; | 542 | chip->eccmode = NAND_ECC_HW3_512; |
548 | chip->autooob = &nand_hw_eccoob; | 543 | chip->autooob = &nand_hw_eccoob; |
544 | |||
545 | if (info->is_s3c2440) { | ||
546 | chip->enable_hwecc = s3c2440_nand_enable_hwecc; | ||
547 | chip->calculate_ecc = s3c2440_nand_calculate_ecc; | ||
548 | } | ||
549 | } else { | 549 | } else { |
550 | chip->eccmode = NAND_ECC_SOFT; | 550 | chip->eccmode = NAND_ECC_SOFT; |
551 | } | 551 | } |
@@ -559,7 +559,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, | |||
559 | * nand layer to look for devices | 559 | * nand layer to look for devices |
560 | */ | 560 | */ |
561 | 561 | ||
562 | static int s3c2410_nand_probe(struct device *dev) | 562 | static int s3c24xx_nand_probe(struct device *dev, int is_s3c2440) |
563 | { | 563 | { |
564 | struct platform_device *pdev = to_platform_device(dev); | 564 | struct platform_device *pdev = to_platform_device(dev); |
565 | struct s3c2410_platform_nand *plat = to_nand_plat(dev); | 565 | struct s3c2410_platform_nand *plat = to_nand_plat(dev); |
@@ -585,6 +585,7 @@ static int s3c2410_nand_probe(struct device *dev) | |||
585 | dev_set_drvdata(dev, info); | 585 | dev_set_drvdata(dev, info); |
586 | 586 | ||
587 | spin_lock_init(&info->controller.lock); | 587 | spin_lock_init(&info->controller.lock); |
588 | init_waitqueue_head(&info->controller.wq); | ||
588 | 589 | ||
589 | /* get the clock source and enable it */ | 590 | /* get the clock source and enable it */ |
590 | 591 | ||
@@ -600,7 +601,8 @@ static int s3c2410_nand_probe(struct device *dev) | |||
600 | 601 | ||
601 | /* allocate and map the resource */ | 602 | /* allocate and map the resource */ |
602 | 603 | ||
603 | res = pdev->resource; /* assume that the flash has one resource */ | 604 | /* currently we assume we have the one resource */ |
605 | res = pdev->resource; | ||
604 | size = res->end - res->start + 1; | 606 | size = res->end - res->start + 1; |
605 | 607 | ||
606 | info->area = request_mem_region(res->start, size, pdev->name); | 608 | info->area = request_mem_region(res->start, size, pdev->name); |
@@ -611,9 +613,10 @@ static int s3c2410_nand_probe(struct device *dev) | |||
611 | goto exit_error; | 613 | goto exit_error; |
612 | } | 614 | } |
613 | 615 | ||
614 | info->device = dev; | 616 | info->device = dev; |
615 | info->platform = plat; | 617 | info->platform = plat; |
616 | info->regs = ioremap(res->start, size); | 618 | info->regs = ioremap(res->start, size); |
619 | info->is_s3c2440 = is_s3c2440; | ||
617 | 620 | ||
618 | if (info->regs == NULL) { | 621 | if (info->regs == NULL) { |
619 | printk(KERN_ERR PFX "cannot reserve register region\n"); | 622 | printk(KERN_ERR PFX "cannot reserve register region\n"); |
@@ -678,6 +681,18 @@ static int s3c2410_nand_probe(struct device *dev) | |||
678 | return err; | 681 | return err; |
679 | } | 682 | } |
680 | 683 | ||
684 | /* driver device registration */ | ||
685 | |||
686 | static int s3c2410_nand_probe(struct device *dev) | ||
687 | { | ||
688 | return s3c24xx_nand_probe(dev, 0); | ||
689 | } | ||
690 | |||
691 | static int s3c2440_nand_probe(struct device *dev) | ||
692 | { | ||
693 | return s3c24xx_nand_probe(dev, 1); | ||
694 | } | ||
695 | |||
681 | static struct device_driver s3c2410_nand_driver = { | 696 | static struct device_driver s3c2410_nand_driver = { |
682 | .name = "s3c2410-nand", | 697 | .name = "s3c2410-nand", |
683 | .bus = &platform_bus_type, | 698 | .bus = &platform_bus_type, |
@@ -685,14 +700,24 @@ static struct device_driver s3c2410_nand_driver = { | |||
685 | .remove = s3c2410_nand_remove, | 700 | .remove = s3c2410_nand_remove, |
686 | }; | 701 | }; |
687 | 702 | ||
703 | static struct device_driver s3c2440_nand_driver = { | ||
704 | .name = "s3c2440-nand", | ||
705 | .bus = &platform_bus_type, | ||
706 | .probe = s3c2440_nand_probe, | ||
707 | .remove = s3c2410_nand_remove, | ||
708 | }; | ||
709 | |||
688 | static int __init s3c2410_nand_init(void) | 710 | static int __init s3c2410_nand_init(void) |
689 | { | 711 | { |
690 | printk("S3C2410 NAND Driver, (c) 2004 Simtec Electronics\n"); | 712 | printk("S3C24XX NAND Driver, (c) 2004 Simtec Electronics\n"); |
713 | |||
714 | driver_register(&s3c2440_nand_driver); | ||
691 | return driver_register(&s3c2410_nand_driver); | 715 | return driver_register(&s3c2410_nand_driver); |
692 | } | 716 | } |
693 | 717 | ||
694 | static void __exit s3c2410_nand_exit(void) | 718 | static void __exit s3c2410_nand_exit(void) |
695 | { | 719 | { |
720 | driver_unregister(&s3c2440_nand_driver); | ||
696 | driver_unregister(&s3c2410_nand_driver); | 721 | driver_unregister(&s3c2410_nand_driver); |
697 | } | 722 | } |
698 | 723 | ||
@@ -701,4 +726,4 @@ module_exit(s3c2410_nand_exit); | |||
701 | 726 | ||
702 | MODULE_LICENSE("GPL"); | 727 | MODULE_LICENSE("GPL"); |
703 | MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); | 728 | MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); |
704 | MODULE_DESCRIPTION("S3C2410 MTD NAND driver"); | 729 | MODULE_DESCRIPTION("S3C24XX MTD NAND driver"); |
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c index 29572793334c..9853b87bb756 100755..100644 --- a/drivers/mtd/nand/sharpsl.c +++ b/drivers/mtd/nand/sharpsl.c | |||
@@ -3,7 +3,7 @@ | |||
3 | * | 3 | * |
4 | * Copyright (C) 2004 Richard Purdie | 4 | * Copyright (C) 2004 Richard Purdie |
5 | * | 5 | * |
6 | * $Id: sharpsl.c,v 1.3 2005/01/03 14:53:50 rpurdie Exp $ | 6 | * $Id: sharpsl.c,v 1.4 2005/01/23 11:09:19 rpurdie Exp $ |
7 | * | 7 | * |
8 | * Based on Sharp's NAND driver sharp_sl.c | 8 | * Based on Sharp's NAND driver sharp_sl.c |
9 | * | 9 | * |
@@ -216,7 +216,7 @@ sharpsl_nand_init(void) | |||
216 | nr_partitions = DEFAULT_NUM_PARTITIONS; | 216 | nr_partitions = DEFAULT_NUM_PARTITIONS; |
217 | sharpsl_partition_info = sharpsl_nand_default_partition_info; | 217 | sharpsl_partition_info = sharpsl_nand_default_partition_info; |
218 | if (machine_is_poodle()) { | 218 | if (machine_is_poodle()) { |
219 | sharpsl_partition_info[1].size=22 * 1024 * 1024; | 219 | sharpsl_partition_info[1].size=30 * 1024 * 1024; |
220 | } else if (machine_is_corgi() || machine_is_shepherd()) { | 220 | } else if (machine_is_corgi() || machine_is_shepherd()) { |
221 | sharpsl_partition_info[1].size=25 * 1024 * 1024; | 221 | sharpsl_partition_info[1].size=25 * 1024 * 1024; |
222 | } else if (machine_is_husky()) { | 222 | } else if (machine_is_husky()) { |
diff --git a/drivers/mtd/nand/tx4925ndfmc.c b/drivers/mtd/nand/tx4925ndfmc.c deleted file mode 100644 index bba688830c9b..000000000000 --- a/drivers/mtd/nand/tx4925ndfmc.c +++ /dev/null | |||
@@ -1,416 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/mtd/tx4925ndfmc.c | ||
3 | * | ||
4 | * Overview: | ||
5 | * This is a device driver for the NAND flash device found on the | ||
6 | * Toshiba RBTX4925 reference board, which is a SmartMediaCard. It supports | ||
7 | * 16MiB, 32MiB and 64MiB cards. | ||
8 | * | ||
9 | * Author: MontaVista Software, Inc. source@mvista.com | ||
10 | * | ||
11 | * Derived from drivers/mtd/autcpu12.c | ||
12 | * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de) | ||
13 | * | ||
14 | * $Id: tx4925ndfmc.c,v 1.5 2004/10/05 13:50:20 gleixner Exp $ | ||
15 | * | ||
16 | * Copyright (C) 2001 Toshiba Corporation | ||
17 | * | ||
18 | * 2003 (c) MontaVista Software, Inc. This file is licensed under | ||
19 | * the terms of the GNU General Public License version 2. This program | ||
20 | * is licensed "as is" without any warranty of any kind, whether express | ||
21 | * or implied. | ||
22 | * | ||
23 | */ | ||
24 | |||
25 | #include <linux/slab.h> | ||
26 | #include <linux/init.h> | ||
27 | #include <linux/module.h> | ||
28 | #include <linux/mtd/mtd.h> | ||
29 | #include <linux/mtd/nand.h> | ||
30 | #include <linux/mtd/partitions.h> | ||
31 | #include <linux/delay.h> | ||
32 | #include <asm/io.h> | ||
33 | #include <asm/tx4925/tx4925_nand.h> | ||
34 | |||
35 | extern struct nand_oobinfo jffs2_oobinfo; | ||
36 | |||
37 | /* | ||
38 | * MTD structure for RBTX4925 board | ||
39 | */ | ||
40 | static struct mtd_info *tx4925ndfmc_mtd = NULL; | ||
41 | |||
42 | /* | ||
43 | * Define partitions for flash devices | ||
44 | */ | ||
45 | |||
46 | static struct mtd_partition partition_info16k[] = { | ||
47 | { .name = "RBTX4925 flash partition 1", | ||
48 | .offset = 0, | ||
49 | .size = 8 * 0x00100000 }, | ||
50 | { .name = "RBTX4925 flash partition 2", | ||
51 | .offset = 8 * 0x00100000, | ||
52 | .size = 8 * 0x00100000 }, | ||
53 | }; | ||
54 | |||
55 | static struct mtd_partition partition_info32k[] = { | ||
56 | { .name = "RBTX4925 flash partition 1", | ||
57 | .offset = 0, | ||
58 | .size = 8 * 0x00100000 }, | ||
59 | { .name = "RBTX4925 flash partition 2", | ||
60 | .offset = 8 * 0x00100000, | ||
61 | .size = 24 * 0x00100000 }, | ||
62 | }; | ||
63 | |||
64 | static struct mtd_partition partition_info64k[] = { | ||
65 | { .name = "User FS", | ||
66 | .offset = 0, | ||
67 | .size = 16 * 0x00100000 }, | ||
68 | { .name = "RBTX4925 flash partition 2", | ||
69 | .offset = 16 * 0x00100000, | ||
70 | .size = 48 * 0x00100000}, | ||
71 | }; | ||
72 | |||
73 | static struct mtd_partition partition_info128k[] = { | ||
74 | { .name = "Skip bad section", | ||
75 | .offset = 0, | ||
76 | .size = 16 * 0x00100000 }, | ||
77 | { .name = "User FS", | ||
78 | .offset = 16 * 0x00100000, | ||
79 | .size = 112 * 0x00100000 }, | ||
80 | }; | ||
81 | #define NUM_PARTITIONS16K 2 | ||
82 | #define NUM_PARTITIONS32K 2 | ||
83 | #define NUM_PARTITIONS64K 2 | ||
84 | #define NUM_PARTITIONS128K 2 | ||
85 | |||
86 | /* | ||
87 | * hardware specific access to control-lines | ||
88 | */ | ||
89 | static void tx4925ndfmc_hwcontrol(struct mtd_info *mtd, int cmd) | ||
90 | { | ||
91 | |||
92 | switch(cmd){ | ||
93 | |||
94 | case NAND_CTL_SETCLE: | ||
95 | tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_CLE; | ||
96 | break; | ||
97 | case NAND_CTL_CLRCLE: | ||
98 | tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_CLE; | ||
99 | break; | ||
100 | case NAND_CTL_SETALE: | ||
101 | tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ALE; | ||
102 | break; | ||
103 | case NAND_CTL_CLRALE: | ||
104 | tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ALE; | ||
105 | break; | ||
106 | case NAND_CTL_SETNCE: | ||
107 | tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_CE; | ||
108 | break; | ||
109 | case NAND_CTL_CLRNCE: | ||
110 | tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_CE; | ||
111 | break; | ||
112 | case NAND_CTL_SETWP: | ||
113 | tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_WE; | ||
114 | break; | ||
115 | case NAND_CTL_CLRWP: | ||
116 | tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_WE; | ||
117 | break; | ||
118 | } | ||
119 | } | ||
120 | |||
121 | /* | ||
122 | * read device ready pin | ||
123 | */ | ||
124 | static int tx4925ndfmc_device_ready(struct mtd_info *mtd) | ||
125 | { | ||
126 | int ready; | ||
127 | ready = (tx4925_ndfmcptr->sr & TX4925_NDSFR_BUSY) ? 0 : 1; | ||
128 | return ready; | ||
129 | } | ||
130 | void tx4925ndfmc_enable_hwecc(struct mtd_info *mtd, int mode) | ||
131 | { | ||
132 | /* reset first */ | ||
133 | tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ECC_CNTL_MASK; | ||
134 | tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ECC_CNTL_MASK; | ||
135 | tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ECC_CNTL_ENAB; | ||
136 | } | ||
137 | static void tx4925ndfmc_disable_ecc(void) | ||
138 | { | ||
139 | tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ECC_CNTL_MASK; | ||
140 | } | ||
141 | static void tx4925ndfmc_enable_read_ecc(void) | ||
142 | { | ||
143 | tx4925_ndfmcptr->mcr &= ~TX4925_NDFMCR_ECC_CNTL_MASK; | ||
144 | tx4925_ndfmcptr->mcr |= TX4925_NDFMCR_ECC_CNTL_READ; | ||
145 | } | ||
146 | void tx4925ndfmc_readecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code){ | ||
147 | int i; | ||
148 | u_char *ecc = ecc_code; | ||
149 | tx4925ndfmc_enable_read_ecc(); | ||
150 | for (i = 0;i < 6;i++,ecc++) | ||
151 | *ecc = tx4925_read_nfmc(&(tx4925_ndfmcptr->dtr)); | ||
152 | tx4925ndfmc_disable_ecc(); | ||
153 | } | ||
154 | void tx4925ndfmc_device_setup(void) | ||
155 | { | ||
156 | |||
157 | *(unsigned char *)0xbb005000 &= ~0x08; | ||
158 | |||
159 | /* reset NDFMC */ | ||
160 | tx4925_ndfmcptr->rstr |= TX4925_NDFRSTR_RST; | ||
161 | while (tx4925_ndfmcptr->rstr & TX4925_NDFRSTR_RST); | ||
162 | |||
163 | /* setup BusSeparete, Hold Time, Strobe Pulse Width */ | ||
164 | tx4925_ndfmcptr->mcr = TX4925_BSPRT ? TX4925_NDFMCR_BSPRT : 0; | ||
165 | tx4925_ndfmcptr->spr = TX4925_HOLD << 4 | TX4925_SPW; | ||
166 | } | ||
167 | static u_char tx4925ndfmc_nand_read_byte(struct mtd_info *mtd) | ||
168 | { | ||
169 | struct nand_chip *this = mtd->priv; | ||
170 | return tx4925_read_nfmc(this->IO_ADDR_R); | ||
171 | } | ||
172 | |||
173 | static void tx4925ndfmc_nand_write_byte(struct mtd_info *mtd, u_char byte) | ||
174 | { | ||
175 | struct nand_chip *this = mtd->priv; | ||
176 | tx4925_write_nfmc(byte, this->IO_ADDR_W); | ||
177 | } | ||
178 | |||
179 | static void tx4925ndfmc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) | ||
180 | { | ||
181 | int i; | ||
182 | struct nand_chip *this = mtd->priv; | ||
183 | |||
184 | for (i=0; i<len; i++) | ||
185 | tx4925_write_nfmc(buf[i], this->IO_ADDR_W); | ||
186 | } | ||
187 | |||
188 | static void tx4925ndfmc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) | ||
189 | { | ||
190 | int i; | ||
191 | struct nand_chip *this = mtd->priv; | ||
192 | |||
193 | for (i=0; i<len; i++) | ||
194 | buf[i] = tx4925_read_nfmc(this->IO_ADDR_R); | ||
195 | } | ||
196 | |||
197 | static int tx4925ndfmc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) | ||
198 | { | ||
199 | int i; | ||
200 | struct nand_chip *this = mtd->priv; | ||
201 | |||
202 | for (i=0; i<len; i++) | ||
203 | if (buf[i] != tx4925_read_nfmc(this->IO_ADDR_R)) | ||
204 | return -EFAULT; | ||
205 | |||
206 | return 0; | ||
207 | } | ||
208 | |||
209 | /* | ||
210 | * Send command to NAND device | ||
211 | */ | ||
212 | static void tx4925ndfmc_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr) | ||
213 | { | ||
214 | register struct nand_chip *this = mtd->priv; | ||
215 | |||
216 | /* Begin command latch cycle */ | ||
217 | this->hwcontrol(mtd, NAND_CTL_SETCLE); | ||
218 | /* | ||
219 | * Write out the command to the device. | ||
220 | */ | ||
221 | if (command == NAND_CMD_SEQIN) { | ||
222 | int readcmd; | ||
223 | |||
224 | if (column >= mtd->oobblock) { | ||
225 | /* OOB area */ | ||
226 | column -= mtd->oobblock; | ||
227 | readcmd = NAND_CMD_READOOB; | ||
228 | } else if (column < 256) { | ||
229 | /* First 256 bytes --> READ0 */ | ||
230 | readcmd = NAND_CMD_READ0; | ||
231 | } else { | ||
232 | column -= 256; | ||
233 | readcmd = NAND_CMD_READ1; | ||
234 | } | ||
235 | this->write_byte(mtd, readcmd); | ||
236 | } | ||
237 | this->write_byte(mtd, command); | ||
238 | |||
239 | /* Set ALE and clear CLE to start address cycle */ | ||
240 | this->hwcontrol(mtd, NAND_CTL_CLRCLE); | ||
241 | |||
242 | if (column != -1 || page_addr != -1) { | ||
243 | this->hwcontrol(mtd, NAND_CTL_SETALE); | ||
244 | |||
245 | /* Serially input address */ | ||
246 | if (column != -1) | ||
247 | this->write_byte(mtd, column); | ||
248 | if (page_addr != -1) { | ||
249 | this->write_byte(mtd, (unsigned char) (page_addr & 0xff)); | ||
250 | this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff)); | ||
251 | /* One more address cycle for higher density devices */ | ||
252 | if (mtd->size & 0x0c000000) | ||
253 | this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f)); | ||
254 | } | ||
255 | /* Latch in address */ | ||
256 | this->hwcontrol(mtd, NAND_CTL_CLRALE); | ||
257 | } | ||
258 | |||
259 | /* | ||
260 | * program and erase have their own busy handlers | ||
261 | * status and sequential in needs no delay | ||
262 | */ | ||
263 | switch (command) { | ||
264 | |||
265 | case NAND_CMD_PAGEPROG: | ||
266 | /* Turn off WE */ | ||
267 | this->hwcontrol (mtd, NAND_CTL_CLRWP); | ||
268 | return; | ||
269 | |||
270 | case NAND_CMD_SEQIN: | ||
271 | /* Turn on WE */ | ||
272 | this->hwcontrol (mtd, NAND_CTL_SETWP); | ||
273 | return; | ||
274 | |||
275 | case NAND_CMD_ERASE1: | ||
276 | case NAND_CMD_ERASE2: | ||
277 | case NAND_CMD_STATUS: | ||
278 | return; | ||
279 | |||
280 | case NAND_CMD_RESET: | ||
281 | if (this->dev_ready) | ||
282 | break; | ||
283 | this->hwcontrol(mtd, NAND_CTL_SETCLE); | ||
284 | this->write_byte(mtd, NAND_CMD_STATUS); | ||
285 | this->hwcontrol(mtd, NAND_CTL_CLRCLE); | ||
286 | while ( !(this->read_byte(mtd) & 0x40)); | ||
287 | return; | ||
288 | |||
289 | /* This applies to read commands */ | ||
290 | default: | ||
291 | /* | ||
292 | * If we don't have access to the busy pin, we apply the given | ||
293 | * command delay | ||
294 | */ | ||
295 | if (!this->dev_ready) { | ||
296 | udelay (this->chip_delay); | ||
297 | return; | ||
298 | } | ||
299 | } | ||
300 | |||
301 | /* wait until command is processed */ | ||
302 | while (!this->dev_ready(mtd)); | ||
303 | } | ||
304 | |||
305 | #ifdef CONFIG_MTD_CMDLINE_PARTS | ||
306 | extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partitio | ||
307 | n **pparts, char *); | ||
308 | #endif | ||
309 | |||
310 | /* | ||
311 | * Main initialization routine | ||
312 | */ | ||
313 | extern int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); | ||
314 | int __init tx4925ndfmc_init (void) | ||
315 | { | ||
316 | struct nand_chip *this; | ||
317 | int err = 0; | ||
318 | |||
319 | /* Allocate memory for MTD device structure and private data */ | ||
320 | tx4925ndfmc_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip), | ||
321 | GFP_KERNEL); | ||
322 | if (!tx4925ndfmc_mtd) { | ||
323 | printk ("Unable to allocate RBTX4925 NAND MTD device structure.\n"); | ||
324 | err = -ENOMEM; | ||
325 | goto out; | ||
326 | } | ||
327 | |||
328 | tx4925ndfmc_device_setup(); | ||
329 | |||
330 | /* io is indirect via a register so don't need to ioremap address */ | ||
331 | |||
332 | /* Get pointer to private data */ | ||
333 | this = (struct nand_chip *) (&tx4925ndfmc_mtd[1]); | ||
334 | |||
335 | /* Initialize structures */ | ||
336 | memset((char *) tx4925ndfmc_mtd, 0, sizeof(struct mtd_info)); | ||
337 | memset((char *) this, 0, sizeof(struct nand_chip)); | ||
338 | |||
339 | /* Link the private data with the MTD structure */ | ||
340 | tx4925ndfmc_mtd->priv = this; | ||
341 | |||
342 | /* Set address of NAND IO lines */ | ||
343 | this->IO_ADDR_R = (void __iomem *)&(tx4925_ndfmcptr->dtr); | ||
344 | this->IO_ADDR_W = (void __iomem *)&(tx4925_ndfmcptr->dtr); | ||
345 | this->hwcontrol = tx4925ndfmc_hwcontrol; | ||
346 | this->enable_hwecc = tx4925ndfmc_enable_hwecc; | ||
347 | this->calculate_ecc = tx4925ndfmc_readecc; | ||
348 | this->correct_data = nand_correct_data; | ||
349 | this->eccmode = NAND_ECC_HW6_512; | ||
350 | this->dev_ready = tx4925ndfmc_device_ready; | ||
351 | /* 20 us command delay time */ | ||
352 | this->chip_delay = 20; | ||
353 | this->read_byte = tx4925ndfmc_nand_read_byte; | ||
354 | this->write_byte = tx4925ndfmc_nand_write_byte; | ||
355 | this->cmdfunc = tx4925ndfmc_nand_command; | ||
356 | this->write_buf = tx4925ndfmc_nand_write_buf; | ||
357 | this->read_buf = tx4925ndfmc_nand_read_buf; | ||
358 | this->verify_buf = tx4925ndfmc_nand_verify_buf; | ||
359 | |||
360 | /* Scan to find existance of the device */ | ||
361 | if (nand_scan (tx4925ndfmc_mtd, 1)) { | ||
362 | err = -ENXIO; | ||
363 | goto out_ior; | ||
364 | } | ||
365 | |||
366 | /* Register the partitions */ | ||
367 | #ifdef CONFIG_MTD_CMDLINE_PARTS | ||
368 | { | ||
369 | int mtd_parts_nb = 0; | ||
370 | struct mtd_partition *mtd_parts = 0; | ||
371 | mtd_parts_nb = parse_cmdline_partitions(tx4925ndfmc_mtd, &mtd_parts, "tx4925ndfmc"); | ||
372 | if (mtd_parts_nb > 0) | ||
373 | add_mtd_partitions(tx4925ndfmc_mtd, mtd_parts, mtd_parts_nb); | ||
374 | else | ||
375 | add_mtd_device(tx4925ndfmc_mtd); | ||
376 | } | ||
377 | #else /* ifdef CONFIG_MTD_CMDLINE_PARTS */ | ||
378 | switch(tx4925ndfmc_mtd->size){ | ||
379 | case 0x01000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info16k, NUM_PARTITIONS16K); break; | ||
380 | case 0x02000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info32k, NUM_PARTITIONS32K); break; | ||
381 | case 0x04000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info64k, NUM_PARTITIONS64K); break; | ||
382 | case 0x08000000: add_mtd_partitions(tx4925ndfmc_mtd, partition_info128k, NUM_PARTITIONS128K); break; | ||
383 | default: { | ||
384 | printk ("Unsupported SmartMedia device\n"); | ||
385 | err = -ENXIO; | ||
386 | goto out_ior; | ||
387 | } | ||
388 | } | ||
389 | #endif /* ifdef CONFIG_MTD_CMDLINE_PARTS */ | ||
390 | goto out; | ||
391 | |||
392 | out_ior: | ||
393 | out: | ||
394 | return err; | ||
395 | } | ||
396 | |||
397 | module_init(tx4925ndfmc_init); | ||
398 | |||
399 | /* | ||
400 | * Clean up routine | ||
401 | */ | ||
402 | #ifdef MODULE | ||
403 | static void __exit tx4925ndfmc_cleanup (void) | ||
404 | { | ||
405 | /* Release resources, unregister device */ | ||
406 | nand_release (tx4925ndfmc_mtd); | ||
407 | |||
408 | /* Free the MTD device structure */ | ||
409 | kfree (tx4925ndfmc_mtd); | ||
410 | } | ||
411 | module_exit(tx4925ndfmc_cleanup); | ||
412 | #endif | ||
413 | |||
414 | MODULE_LICENSE("GPL"); | ||
415 | MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>"); | ||
416 | MODULE_DESCRIPTION("Glue layer for SmartMediaCard on Toshiba RBTX4925"); | ||
diff --git a/drivers/mtd/nand/tx4938ndfmc.c b/drivers/mtd/nand/tx4938ndfmc.c deleted file mode 100644 index df26e58820b3..000000000000 --- a/drivers/mtd/nand/tx4938ndfmc.c +++ /dev/null | |||
@@ -1,406 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/mtd/nand/tx4938ndfmc.c | ||
3 | * | ||
4 | * Overview: | ||
5 | * This is a device driver for the NAND flash device connected to | ||
6 | * TX4938 internal NAND Memory Controller. | ||
7 | * TX4938 NDFMC is almost same as TX4925 NDFMC, but register size are 64 bit. | ||
8 | * | ||
9 | * Author: source@mvista.com | ||
10 | * | ||
11 | * Based on spia.c by Steven J. Hill | ||
12 | * | ||
13 | * $Id: tx4938ndfmc.c,v 1.4 2004/10/05 13:50:20 gleixner Exp $ | ||
14 | * | ||
15 | * Copyright (C) 2000-2001 Toshiba Corporation | ||
16 | * | ||
17 | * 2003 (c) MontaVista Software, Inc. This file is licensed under the | ||
18 | * terms of the GNU General Public License version 2. This program is | ||
19 | * licensed "as is" without any warranty of any kind, whether express | ||
20 | * or implied. | ||
21 | */ | ||
22 | #include <linux/config.h> | ||
23 | #include <linux/slab.h> | ||
24 | #include <linux/init.h> | ||
25 | #include <linux/module.h> | ||
26 | #include <linux/mtd/mtd.h> | ||
27 | #include <linux/mtd/nand.h> | ||
28 | #include <linux/mtd/nand_ecc.h> | ||
29 | #include <linux/mtd/partitions.h> | ||
30 | #include <asm/io.h> | ||
31 | #include <asm/bootinfo.h> | ||
32 | #include <linux/delay.h> | ||
33 | #include <asm/tx4938/rbtx4938.h> | ||
34 | |||
35 | extern struct nand_oobinfo jffs2_oobinfo; | ||
36 | |||
37 | /* | ||
38 | * MTD structure for TX4938 NDFMC | ||
39 | */ | ||
40 | static struct mtd_info *tx4938ndfmc_mtd; | ||
41 | |||
42 | /* | ||
43 | * Define partitions for flash device | ||
44 | */ | ||
45 | #define flush_wb() (void)tx4938_ndfmcptr->mcr; | ||
46 | |||
47 | #define NUM_PARTITIONS 3 | ||
48 | #define NUMBER_OF_CIS_BLOCKS 24 | ||
49 | #define SIZE_OF_BLOCK 0x00004000 | ||
50 | #define NUMBER_OF_BLOCK_PER_ZONE 1024 | ||
51 | #define SIZE_OF_ZONE (NUMBER_OF_BLOCK_PER_ZONE * SIZE_OF_BLOCK) | ||
52 | #ifndef CONFIG_MTD_CMDLINE_PARTS | ||
53 | /* | ||
54 | * You can use the following sample of MTD partitions | ||
55 | * on the NAND Flash Memory 32MB or more. | ||
56 | * | ||
57 | * The following figure shows the image of the sample partition on | ||
58 | * the 32MB NAND Flash Memory. | ||
59 | * | ||
60 | * Block No. | ||
61 | * 0 +-----------------------------+ ------ | ||
62 | * | CIS | ^ | ||
63 | * 24 +-----------------------------+ | | ||
64 | * | kernel image | | Zone 0 | ||
65 | * | | | | ||
66 | * +-----------------------------+ | | ||
67 | * 1023 | unused area | v | ||
68 | * +-----------------------------+ ------ | ||
69 | * 1024 | JFFS2 | ^ | ||
70 | * | | | | ||
71 | * | | | Zone 1 | ||
72 | * | | | | ||
73 | * | | | | ||
74 | * | | v | ||
75 | * 2047 +-----------------------------+ ------ | ||
76 | * | ||
77 | */ | ||
78 | static struct mtd_partition partition_info[NUM_PARTITIONS] = { | ||
79 | { | ||
80 | .name = "RBTX4938 CIS Area", | ||
81 | .offset = 0, | ||
82 | .size = (NUMBER_OF_CIS_BLOCKS * SIZE_OF_BLOCK), | ||
83 | .mask_flags = MTD_WRITEABLE /* This partition is NOT writable */ | ||
84 | }, | ||
85 | { | ||
86 | .name = "RBTX4938 kernel image", | ||
87 | .offset = MTDPART_OFS_APPEND, | ||
88 | .size = 8 * 0x00100000, /* 8MB (Depends on size of kernel image) */ | ||
89 | .mask_flags = MTD_WRITEABLE /* This partition is NOT writable */ | ||
90 | }, | ||
91 | { | ||
92 | .name = "Root FS (JFFS2)", | ||
93 | .offset = (0 + SIZE_OF_ZONE), /* start address of next zone */ | ||
94 | .size = MTDPART_SIZ_FULL | ||
95 | }, | ||
96 | }; | ||
97 | #endif | ||
98 | |||
99 | static void tx4938ndfmc_hwcontrol(struct mtd_info *mtd, int cmd) | ||
100 | { | ||
101 | switch (cmd) { | ||
102 | case NAND_CTL_SETCLE: | ||
103 | tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_CLE; | ||
104 | break; | ||
105 | case NAND_CTL_CLRCLE: | ||
106 | tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_CLE; | ||
107 | break; | ||
108 | case NAND_CTL_SETALE: | ||
109 | tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_ALE; | ||
110 | break; | ||
111 | case NAND_CTL_CLRALE: | ||
112 | tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_ALE; | ||
113 | break; | ||
114 | /* TX4938_NDFMCR_CE bit is 0:high 1:low */ | ||
115 | case NAND_CTL_SETNCE: | ||
116 | tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_CE; | ||
117 | break; | ||
118 | case NAND_CTL_CLRNCE: | ||
119 | tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_CE; | ||
120 | break; | ||
121 | case NAND_CTL_SETWP: | ||
122 | tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_WE; | ||
123 | break; | ||
124 | case NAND_CTL_CLRWP: | ||
125 | tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_WE; | ||
126 | break; | ||
127 | } | ||
128 | } | ||
129 | static int tx4938ndfmc_dev_ready(struct mtd_info *mtd) | ||
130 | { | ||
131 | flush_wb(); | ||
132 | return !(tx4938_ndfmcptr->sr & TX4938_NDFSR_BUSY); | ||
133 | } | ||
134 | static void tx4938ndfmc_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) | ||
135 | { | ||
136 | u32 mcr = tx4938_ndfmcptr->mcr; | ||
137 | mcr &= ~TX4938_NDFMCR_ECC_ALL; | ||
138 | tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_OFF; | ||
139 | tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_READ; | ||
140 | ecc_code[1] = tx4938_ndfmcptr->dtr; | ||
141 | ecc_code[0] = tx4938_ndfmcptr->dtr; | ||
142 | ecc_code[2] = tx4938_ndfmcptr->dtr; | ||
143 | tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_OFF; | ||
144 | } | ||
145 | static void tx4938ndfmc_enable_hwecc(struct mtd_info *mtd, int mode) | ||
146 | { | ||
147 | u32 mcr = tx4938_ndfmcptr->mcr; | ||
148 | mcr &= ~TX4938_NDFMCR_ECC_ALL; | ||
149 | tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_RESET; | ||
150 | tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_OFF; | ||
151 | tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_ON; | ||
152 | } | ||
153 | |||
154 | static u_char tx4938ndfmc_nand_read_byte(struct mtd_info *mtd) | ||
155 | { | ||
156 | struct nand_chip *this = mtd->priv; | ||
157 | return tx4938_read_nfmc(this->IO_ADDR_R); | ||
158 | } | ||
159 | |||
160 | static void tx4938ndfmc_nand_write_byte(struct mtd_info *mtd, u_char byte) | ||
161 | { | ||
162 | struct nand_chip *this = mtd->priv; | ||
163 | tx4938_write_nfmc(byte, this->IO_ADDR_W); | ||
164 | } | ||
165 | |||
166 | static void tx4938ndfmc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) | ||
167 | { | ||
168 | int i; | ||
169 | struct nand_chip *this = mtd->priv; | ||
170 | |||
171 | for (i=0; i<len; i++) | ||
172 | tx4938_write_nfmc(buf[i], this->IO_ADDR_W); | ||
173 | } | ||
174 | |||
175 | static void tx4938ndfmc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) | ||
176 | { | ||
177 | int i; | ||
178 | struct nand_chip *this = mtd->priv; | ||
179 | |||
180 | for (i=0; i<len; i++) | ||
181 | buf[i] = tx4938_read_nfmc(this->IO_ADDR_R); | ||
182 | } | ||
183 | |||
184 | static int tx4938ndfmc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) | ||
185 | { | ||
186 | int i; | ||
187 | struct nand_chip *this = mtd->priv; | ||
188 | |||
189 | for (i=0; i<len; i++) | ||
190 | if (buf[i] != tx4938_read_nfmc(this->IO_ADDR_R)) | ||
191 | return -EFAULT; | ||
192 | |||
193 | return 0; | ||
194 | } | ||
195 | |||
196 | /* | ||
197 | * Send command to NAND device | ||
198 | */ | ||
199 | static void tx4938ndfmc_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr) | ||
200 | { | ||
201 | register struct nand_chip *this = mtd->priv; | ||
202 | |||
203 | /* Begin command latch cycle */ | ||
204 | this->hwcontrol(mtd, NAND_CTL_SETCLE); | ||
205 | /* | ||
206 | * Write out the command to the device. | ||
207 | */ | ||
208 | if (command == NAND_CMD_SEQIN) { | ||
209 | int readcmd; | ||
210 | |||
211 | if (column >= mtd->oobblock) { | ||
212 | /* OOB area */ | ||
213 | column -= mtd->oobblock; | ||
214 | readcmd = NAND_CMD_READOOB; | ||
215 | } else if (column < 256) { | ||
216 | /* First 256 bytes --> READ0 */ | ||
217 | readcmd = NAND_CMD_READ0; | ||
218 | } else { | ||
219 | column -= 256; | ||
220 | readcmd = NAND_CMD_READ1; | ||
221 | } | ||
222 | this->write_byte(mtd, readcmd); | ||
223 | } | ||
224 | this->write_byte(mtd, command); | ||
225 | |||
226 | /* Set ALE and clear CLE to start address cycle */ | ||
227 | this->hwcontrol(mtd, NAND_CTL_CLRCLE); | ||
228 | |||
229 | if (column != -1 || page_addr != -1) { | ||
230 | this->hwcontrol(mtd, NAND_CTL_SETALE); | ||
231 | |||
232 | /* Serially input address */ | ||
233 | if (column != -1) | ||
234 | this->write_byte(mtd, column); | ||
235 | if (page_addr != -1) { | ||
236 | this->write_byte(mtd, (unsigned char) (page_addr & 0xff)); | ||
237 | this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff)); | ||
238 | /* One more address cycle for higher density devices */ | ||
239 | if (mtd->size & 0x0c000000) | ||
240 | this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f)); | ||
241 | } | ||
242 | /* Latch in address */ | ||
243 | this->hwcontrol(mtd, NAND_CTL_CLRALE); | ||
244 | } | ||
245 | |||
246 | /* | ||
247 | * program and erase have their own busy handlers | ||
248 | * status and sequential in needs no delay | ||
249 | */ | ||
250 | switch (command) { | ||
251 | |||
252 | case NAND_CMD_PAGEPROG: | ||
253 | /* Turn off WE */ | ||
254 | this->hwcontrol (mtd, NAND_CTL_CLRWP); | ||
255 | return; | ||
256 | |||
257 | case NAND_CMD_SEQIN: | ||
258 | /* Turn on WE */ | ||
259 | this->hwcontrol (mtd, NAND_CTL_SETWP); | ||
260 | return; | ||
261 | |||
262 | case NAND_CMD_ERASE1: | ||
263 | case NAND_CMD_ERASE2: | ||
264 | case NAND_CMD_STATUS: | ||
265 | return; | ||
266 | |||
267 | case NAND_CMD_RESET: | ||
268 | if (this->dev_ready) | ||
269 | break; | ||
270 | this->hwcontrol(mtd, NAND_CTL_SETCLE); | ||
271 | this->write_byte(mtd, NAND_CMD_STATUS); | ||
272 | this->hwcontrol(mtd, NAND_CTL_CLRCLE); | ||
273 | while ( !(this->read_byte(mtd) & 0x40)); | ||
274 | return; | ||
275 | |||
276 | /* This applies to read commands */ | ||
277 | default: | ||
278 | /* | ||
279 | * If we don't have access to the busy pin, we apply the given | ||
280 | * command delay | ||
281 | */ | ||
282 | if (!this->dev_ready) { | ||
283 | udelay (this->chip_delay); | ||
284 | return; | ||
285 | } | ||
286 | } | ||
287 | |||
288 | /* wait until command is processed */ | ||
289 | while (!this->dev_ready(mtd)); | ||
290 | } | ||
291 | |||
292 | #ifdef CONFIG_MTD_CMDLINE_PARTS | ||
293 | extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, char *); | ||
294 | #endif | ||
295 | /* | ||
296 | * Main initialization routine | ||
297 | */ | ||
298 | int __init tx4938ndfmc_init (void) | ||
299 | { | ||
300 | struct nand_chip *this; | ||
301 | int bsprt = 0, hold = 0xf, spw = 0xf; | ||
302 | int protected = 0; | ||
303 | |||
304 | if ((*rbtx4938_piosel_ptr & 0x0c) != 0x08) { | ||
305 | printk("TX4938 NDFMC: disabled by IOC PIOSEL\n"); | ||
306 | return -ENODEV; | ||
307 | } | ||
308 | bsprt = 1; | ||
309 | hold = 2; | ||
310 | spw = 9 - 1; /* 8 GBUSCLK = 80ns (@ GBUSCLK 100MHz) */ | ||
311 | |||
312 | if ((tx4938_ccfgptr->pcfg & | ||
313 | (TX4938_PCFG_ATA_SEL|TX4938_PCFG_ISA_SEL|TX4938_PCFG_NDF_SEL)) | ||
314 | != TX4938_PCFG_NDF_SEL) { | ||
315 | printk("TX4938 NDFMC: disabled by PCFG.\n"); | ||
316 | return -ENODEV; | ||
317 | } | ||
318 | |||
319 | /* reset NDFMC */ | ||
320 | tx4938_ndfmcptr->rstr |= TX4938_NDFRSTR_RST; | ||
321 | while (tx4938_ndfmcptr->rstr & TX4938_NDFRSTR_RST) | ||
322 | ; | ||
323 | /* setup BusSeparete, Hold Time, Strobe Pulse Width */ | ||
324 | tx4938_ndfmcptr->mcr = bsprt ? TX4938_NDFMCR_BSPRT : 0; | ||
325 | tx4938_ndfmcptr->spr = hold << 4 | spw; | ||
326 | |||
327 | /* Allocate memory for MTD device structure and private data */ | ||
328 | tx4938ndfmc_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip), | ||
329 | GFP_KERNEL); | ||
330 | if (!tx4938ndfmc_mtd) { | ||
331 | printk ("Unable to allocate TX4938 NDFMC MTD device structure.\n"); | ||
332 | return -ENOMEM; | ||
333 | } | ||
334 | |||
335 | /* Get pointer to private data */ | ||
336 | this = (struct nand_chip *) (&tx4938ndfmc_mtd[1]); | ||
337 | |||
338 | /* Initialize structures */ | ||
339 | memset((char *) tx4938ndfmc_mtd, 0, sizeof(struct mtd_info)); | ||
340 | memset((char *) this, 0, sizeof(struct nand_chip)); | ||
341 | |||
342 | /* Link the private data with the MTD structure */ | ||
343 | tx4938ndfmc_mtd->priv = this; | ||
344 | |||
345 | /* Set address of NAND IO lines */ | ||
346 | this->IO_ADDR_R = (unsigned long)&tx4938_ndfmcptr->dtr; | ||
347 | this->IO_ADDR_W = (unsigned long)&tx4938_ndfmcptr->dtr; | ||
348 | this->hwcontrol = tx4938ndfmc_hwcontrol; | ||
349 | this->dev_ready = tx4938ndfmc_dev_ready; | ||
350 | this->calculate_ecc = tx4938ndfmc_calculate_ecc; | ||
351 | this->correct_data = nand_correct_data; | ||
352 | this->enable_hwecc = tx4938ndfmc_enable_hwecc; | ||
353 | this->eccmode = NAND_ECC_HW3_256; | ||
354 | this->chip_delay = 100; | ||
355 | this->read_byte = tx4938ndfmc_nand_read_byte; | ||
356 | this->write_byte = tx4938ndfmc_nand_write_byte; | ||
357 | this->cmdfunc = tx4938ndfmc_nand_command; | ||
358 | this->write_buf = tx4938ndfmc_nand_write_buf; | ||
359 | this->read_buf = tx4938ndfmc_nand_read_buf; | ||
360 | this->verify_buf = tx4938ndfmc_nand_verify_buf; | ||
361 | |||
362 | /* Scan to find existance of the device */ | ||
363 | if (nand_scan (tx4938ndfmc_mtd, 1)) { | ||
364 | kfree (tx4938ndfmc_mtd); | ||
365 | return -ENXIO; | ||
366 | } | ||
367 | |||
368 | if (protected) { | ||
369 | printk(KERN_INFO "TX4938 NDFMC: write protected.\n"); | ||
370 | tx4938ndfmc_mtd->flags &= ~(MTD_WRITEABLE | MTD_ERASEABLE); | ||
371 | } | ||
372 | |||
373 | #ifdef CONFIG_MTD_CMDLINE_PARTS | ||
374 | { | ||
375 | int mtd_parts_nb = 0; | ||
376 | struct mtd_partition *mtd_parts = 0; | ||
377 | mtd_parts_nb = parse_cmdline_partitions(tx4938ndfmc_mtd, &mtd_parts, "tx4938ndfmc"); | ||
378 | if (mtd_parts_nb > 0) | ||
379 | add_mtd_partitions(tx4938ndfmc_mtd, mtd_parts, mtd_parts_nb); | ||
380 | else | ||
381 | add_mtd_device(tx4938ndfmc_mtd); | ||
382 | } | ||
383 | #else | ||
384 | add_mtd_partitions(tx4938ndfmc_mtd, partition_info, NUM_PARTITIONS ); | ||
385 | #endif | ||
386 | |||
387 | return 0; | ||
388 | } | ||
389 | module_init(tx4938ndfmc_init); | ||
390 | |||
391 | /* | ||
392 | * Clean up routine | ||
393 | */ | ||
394 | static void __exit tx4938ndfmc_cleanup (void) | ||
395 | { | ||
396 | /* Release resources, unregister device */ | ||
397 | nand_release (tx4938ndfmc_mtd); | ||
398 | |||
399 | /* Free the MTD device structure */ | ||
400 | kfree (tx4938ndfmc_mtd); | ||
401 | } | ||
402 | module_exit(tx4938ndfmc_cleanup); | ||
403 | |||
404 | MODULE_LICENSE("GPL"); | ||
405 | MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>"); | ||
406 | MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on TX4938 NDFMC"); | ||