3 files changed, 587 insertions, 0 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 1577bcad288a..d01d0b175e1c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -683,4 +683,13 @@ config I2C_PMCMSP
           This driver can also be built as module. If so, the module
           will be called i2c-pmcmsp.
 
+config I2C_SH7760
+        tristate "Renesas SH7760 I2C Controller"
+        depends on CPU_SUBTYPE_SH7760
+        help
+          This driver supports the 2 I2C interfaces on the Renesas SH7760.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-sh7760.
+
 endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 378d5c07e048..8e72b2649dc7 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_I2C_PROSAVAGE)	+= i2c-prosavage.o
 obj-$(CONFIG_I2C_PXA)           += i2c-pxa.o
 obj-$(CONFIG_I2C_S3C2410)       += i2c-s3c2410.o
 obj-$(CONFIG_I2C_SAVAGE4)       += i2c-savage4.o
+obj-$(CONFIG_I2C_SH7760)        += i2c-sh7760.o
 obj-$(CONFIG_I2C_SIBYTE)        += i2c-sibyte.o
 obj-$(CONFIG_I2C_SIMTEC)        += i2c-simtec.o
 obj-$(CONFIG_I2C_SIS5595)       += i2c-sis5595.o
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
new file mode 100644
index 000000000000..5e0e254976de
--- /dev/null
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -0,0 +1,577 @@
+/*
+ * I2C bus driver for the SH7760 I2C Interfaces.
+ *
+ * (c) 2005-2008 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com>
+ *
+ * licensed under the terms outlined in the file COPYING.
+ *
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/clock.h>
+#include <asm/i2c-sh7760.h>
+#include <asm/io.h>
+
+/* register offsets */
+#define I2CSCR          0x0             /* slave ctrl           */
+#define I2CMCR          0x4             /* master ctrl          */
+#define I2CSSR          0x8             /* slave status         */
+#define I2CMSR          0xC             /* master status        */
+#define I2CSIER         0x10            /* slave irq enable     */
+#define I2CMIER         0x14            /* master irq enable    */
+#define I2CCCR          0x18            /* clock dividers       */
+#define I2CSAR          0x1c            /* slave address        */
+#define I2CMAR          0x20            /* master address       */
+#define I2CRXTX         0x24            /* data port            */
+#define I2CFCR          0x28            /* fifo control         */
+#define I2CFSR          0x2C            /* fifo status          */
+#define I2CFIER         0x30            /* fifo irq enable      */
+#define I2CRFDR         0x34            /* rx fifo count        */
+#define I2CTFDR         0x38            /* tx fifo count        */
+
+#define REGSIZE         0x3C
+
+#define MCR_MDBS        0x80            /* non-fifo mode switch */
+#define MCR_FSCL        0x40            /* override SCL pin     */
+#define MCR_FSDA        0x20            /* override SDA pin     */
+#define MCR_OBPC        0x10            /* override pins        */
+#define MCR_MIE         0x08            /* master if enable     */
+#define MCR_TSBE        0x04
+#define MCR_FSB         0x02            /* force stop bit       */
+#define MCR_ESG         0x01            /* en startbit gen.     */
+
+#define MSR_MNR         0x40            /* nack received        */
+#define MSR_MAL         0x20            /* arbitration lost     */
+#define MSR_MST         0x10            /* sent a stop          */
+#define MSR_MDE         0x08
+#define MSR_MDT         0x04
+#define MSR_MDR         0x02
+#define MSR_MAT         0x01            /* slave addr xfer done */
+
+#define MIE_MNRE        0x40            /* nack irq en          */
+#define MIE_MALE        0x20            /* arblos irq en        */
+#define MIE_MSTE        0x10            /* stop irq en          */
+#define MIE_MDEE        0x08
+#define MIE_MDTE        0x04
+#define MIE_MDRE        0x02
+#define MIE_MATE        0x01            /* address sent irq en  */
+
+#define FCR_RFRST       0x02            /* reset rx fifo        */
+#define FCR_TFRST       0x01            /* reset tx fifo        */
+
+#define FSR_TEND        0x04            /* last byte sent       */
+#define FSR_RDF         0x02            /* rx fifo trigger      */
+#define FSR_TDFE        0x01            /* tx fifo empty        */
+
+#define FIER_TEIE       0x04            /* tx fifo empty irq en */
+#define FIER_RXIE       0x02            /* rx fifo trig irq en  */
+#define FIER_TXIE       0x01            /* tx fifo trig irq en  */
+
+#define FIFO_SIZE       16
+
+struct cami2c {
+        void __iomem *iobase;
+        struct i2c_adapter adap;
+
+        /* message processing */
+        struct i2c_msg  *msg;
+#define IDF_SEND        1
+#define IDF_RECV        2
+#define IDF_STOP        4
+        int             flags;
+
+#define IDS_DONE        1
+#define IDS_ARBLOST     2
+#define IDS_NACK        4
+        int             status;
+        struct completion xfer_done;
+
+        int irq;
+        struct resource *ioarea;
+};
+
+static inline void OUT32(struct cami2c *cam, int reg, unsigned long val)
+{
+        ctrl_outl(val, (unsigned long)cam->iobase + reg);
+}
+
+static inline unsigned long IN32(struct cami2c *cam, int reg)
+{
+        return ctrl_inl((unsigned long)cam->iobase + reg);
+}
+
+static irqreturn_t sh7760_i2c_irq(int irq, void *ptr)
+{
+        struct cami2c *id = ptr;
+        struct i2c_msg *msg = id->msg;
+        char *data = msg->buf;
+        unsigned long msr, fsr, fier, len;
+
+        msr = IN32(id, I2CMSR);
+        fsr = IN32(id, I2CFSR);
+
+        /* arbitration lost */
+        if (msr & MSR_MAL) {
+                OUT32(id, I2CMCR, 0);
+                OUT32(id, I2CSCR, 0);
+                OUT32(id, I2CSAR, 0);
+                id->status |= IDS_DONE | IDS_ARBLOST;
+                goto out;
+        }
+
+        if (msr & MSR_MNR) {
+                /* NACK handling is very screwed up.  After receiving a
+                 * NAK IRQ one has to wait a bit  before writing to any
+                 * registers, or the ctl will lock up. After that delay
+                 * do a normal i2c stop. Then wait at least 1 ms before
+                 * attempting another transfer or ctl will stop working
+                 */
+                udelay(100);    /* wait or risk ctl hang */
+                OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
+                OUT32(id, I2CMCR, MCR_MIE | MCR_FSB);
+                OUT32(id, I2CFIER, 0);
+                OUT32(id, I2CMIER, MIE_MSTE);
+                OUT32(id, I2CSCR, 0);
+                OUT32(id, I2CSAR, 0);
+                id->status |= IDS_NACK;
+                msr &= ~MSR_MAT;
+                fsr = 0;
+                /* In some cases the MST bit is also set. */
+        }
+
+        /* i2c-stop was sent */
+        if (msr & MSR_MST) {
+                id->status |= IDS_DONE;
+                goto out;
+        }
+
+        /* i2c slave addr was sent; set to "normal" operation */
+        if (msr & MSR_MAT)
+                OUT32(id, I2CMCR, MCR_MIE);
+
+        fier = IN32(id, I2CFIER);
+
+        if (fsr & FSR_RDF) {
+                len = IN32(id, I2CRFDR);
+                if (msg->len <= len) {
+                        if (id->flags & IDF_STOP) {
+                                OUT32(id, I2CMCR, MCR_MIE | MCR_FSB);
+                                OUT32(id, I2CFIER, 0);
+                                /* manual says: wait >= 0.5 SCL times */
+                                udelay(5);
+                                /* next int should be MST */
+                        } else {
+                                id->status |= IDS_DONE;
+                                /* keep the RDF bit: ctrl holds SCL low
+                                 * until the setup for the next i2c_msg
+                                 * clears this bit.
+                                 */
+                                fsr &= ~FSR_RDF;
+                        }
+                }
+                while (msg->len && len) {
+                        *data++ = IN32(id, I2CRXTX);
+                        msg->len--;
+                        len--;
+                }
+
+                if (msg->len) {
+                        len = (msg->len >= FIFO_SIZE) ? FIFO_SIZE - 1
+                                                      : msg->len - 1;
+
+                        OUT32(id, I2CFCR, FCR_TFRST | ((len & 0xf) << 4));
+                }
+
+        } else if (id->flags & IDF_SEND) {
+                if ((fsr & FSR_TEND) && (msg->len < 1)) {
+                        if (id->flags & IDF_STOP) {
+                                OUT32(id, I2CMCR, MCR_MIE | MCR_FSB);
+                        } else {
+                                id->status |= IDS_DONE;
+                                /* keep the TEND bit: ctl holds SCL low
+                                 * until the setup for the next i2c_msg
+                                 * clears this bit.
+                                 */
+                                fsr &= ~FSR_TEND;
+                        }
+                }
+                if (fsr & FSR_TDFE) {
+                        while (msg->len && (IN32(id, I2CTFDR) < FIFO_SIZE)) {
+                                OUT32(id, I2CRXTX, *data++);
+                                msg->len--;
+                        }
+
+                        if (msg->len < 1) {
+                                fier &= ~FIER_TXIE;
+                                OUT32(id, I2CFIER, fier);
+                        } else {
+                                len = (msg->len >= FIFO_SIZE) ? 2 : 0;
+                                OUT32(id, I2CFCR,
+                                          FCR_RFRST | ((len & 3) << 2));
+                        }
+                }
+        }
+out:
+        if (id->status & IDS_DONE) {
+                OUT32(id, I2CMIER, 0);
+                OUT32(id, I2CFIER, 0);
+                id->msg = NULL;
+                complete(&id->xfer_done);
+        }
+        /* clear status flags and ctrl resumes work */
+        OUT32(id, I2CMSR, ~msr);
+        OUT32(id, I2CFSR, ~fsr);
+        OUT32(id, I2CSSR, 0);
+
+        return IRQ_HANDLED;
+}
+
+
+/* prepare and start a master receive operation */
+static void sh7760_i2c_mrecv(struct cami2c *id)
+{
+        int len;
+
+        id->flags |= IDF_RECV;
+
+        /* set the slave addr reg; otherwise rcv wont work! */
+        OUT32(id, I2CSAR, 0xfe);
+        OUT32(id, I2CMAR, (id->msg->addr << 1) | 1);
+
+        /* adjust rx fifo trigger */
+        if (id->msg->len >= FIFO_SIZE)
+                len = FIFO_SIZE - 1;    /* trigger at fifo full */
+        else
+                len = id->msg->len - 1; /* trigger before all received */
+
+        OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
+        OUT32(id, I2CFCR, FCR_TFRST | ((len & 0xF) << 4));
+
+        OUT32(id, I2CMSR, 0);
+        OUT32(id, I2CMCR, MCR_MIE | MCR_ESG);
+        OUT32(id, I2CMIER, MIE_MNRE | MIE_MALE | MIE_MSTE | MIE_MATE);
+        OUT32(id, I2CFIER, FIER_RXIE);
+}
+
+/* prepare and start a master send operation */
+static void sh7760_i2c_msend(struct cami2c *id)
+{
+        int len;
+
+        id->flags |= IDF_SEND;
+
+        /* set the slave addr reg; otherwise xmit wont work! */
+        OUT32(id, I2CSAR, 0xfe);
+        OUT32(id, I2CMAR, (id->msg->addr << 1) | 0);
+
+        /* adjust tx fifo trigger */
+        if (id->msg->len >= FIFO_SIZE)
+                len = 2;        /* trig: 2 bytes left in TX fifo */
+        else
+                len = 0;        /* trig: 8 bytes left in TX fifo */
+
+        OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
+        OUT32(id, I2CFCR, FCR_RFRST | ((len & 3) << 2));
+
+        while (id->msg->len && IN32(id, I2CTFDR) < FIFO_SIZE) {
+                OUT32(id, I2CRXTX, *(id->msg->buf));
+                (id->msg->len)--;
+                (id->msg->buf)++;
+        }
+
+        OUT32(id, I2CMSR, 0);
+        OUT32(id, I2CMCR, MCR_MIE | MCR_ESG);
+        OUT32(id, I2CFSR, 0);
+        OUT32(id, I2CMIER, MIE_MNRE | MIE_MALE | MIE_MSTE | MIE_MATE);
+        OUT32(id, I2CFIER, FIER_TEIE | (id->msg->len ? FIER_TXIE : 0));
+}
+
+static inline int sh7760_i2c_busy_check(struct cami2c *id)
+{
+        return (IN32(id, I2CMCR) & MCR_FSDA);
+}
+
+static int sh7760_i2c_master_xfer(struct i2c_adapter *adap,
+                                  struct i2c_msg *msgs,
+                                  int num)
+{
+        struct cami2c *id = adap->algo_data;
+        int i, retr;
+
+        if (sh7760_i2c_busy_check(id)) {
+                dev_err(&adap->dev, "sh7760-i2c%d: bus busy!\n", adap->nr);
+                return -EBUSY;
+        }
+
+        i = 0;
+        while (i < num) {
+                retr = adap->retries;
+retry:
+                id->flags = ((i == (num-1)) ? IDF_STOP : 0);
+                id->status = 0;
+                id->msg = msgs;
+                init_completion(&id->xfer_done);
+
+                if (msgs->flags & I2C_M_RD)
+                        sh7760_i2c_mrecv(id);
+                else
+                        sh7760_i2c_msend(id);
+
+                wait_for_completion(&id->xfer_done);
+
+                if (id->status == 0) {
+                        num = -EIO;
+                        break;
+                }
+
+                if (id->status & IDS_NACK) {
+                        /* wait a bit or i2c module stops working */
+                        mdelay(1);
+                        num = -EREMOTEIO;
+                        break;
+                }
+
+                if (id->status & IDS_ARBLOST) {
+                        if (retr--) {
+                                mdelay(2);
+                                goto retry;
+                        }
+                        num = -EREMOTEIO;
+                        break;
+                }
+
+                msgs++;
+                i++;
+        }
+
+        id->msg = NULL;
+        id->flags = 0;
+        id->status = 0;
+
+        OUT32(id, I2CMCR, 0);
+        OUT32(id, I2CMSR, 0);
+        OUT32(id, I2CMIER, 0);
+        OUT32(id, I2CFIER, 0);
+
+        /* reset slave module registers too: master mode enables slave
+         * module for receive ops (ack, data). Without this reset,
+         * eternal bus activity might be reported after NACK / ARBLOST.
+         */
+        OUT32(id, I2CSCR, 0);
+        OUT32(id, I2CSAR, 0);
+        OUT32(id, I2CSSR, 0);
+
+        return num;
+}
+
+static u32 sh7760_i2c_func(struct i2c_adapter *adap)
+{
+        return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static const struct i2c_algorithm sh7760_i2c_algo = {
+        .master_xfer    = sh7760_i2c_master_xfer,
+        .functionality  = sh7760_i2c_func,
+};
+
+/* calculate CCR register setting for a desired scl clock.  SCL clock is
+ * derived from I2C module clock  (iclk)  which in turn is derived from
+ * peripheral module clock (mclk, usually around 33MHz):
+ * iclk = mclk/(CDF + 1).  iclk must be < 20MHz.
+ * scl = iclk/(SCGD*8 + 20).
+ */
+static int __devinit calc_CCR(unsigned long scl_hz)
+{
+        struct clk *mclk;
+        unsigned long mck, m1, dff, odff, iclk;
+        signed char cdf, cdfm;
+        int scgd, scgdm, scgds;
+
+        mclk = clk_get(NULL, "module_clk");
+        if (IS_ERR(mclk)) {
+                return PTR_ERR(mclk);
+        } else {
+                mck = mclk->rate;
+                clk_put(mclk);
+        }
+
+        odff = scl_hz;
+        scgdm = cdfm = m1 = 0;
+        for (cdf = 3; cdf >= 0; cdf--) {
+                iclk = mck / (1 + cdf);
+                if (iclk >= 20000000)
+                        continue;
+                scgds = ((iclk / scl_hz) - 20) >> 3;
+                for (scgd = scgds; (scgd < 63) && scgd <= scgds + 1; scgd++) {
+                        m1 = iclk / (20 + (scgd << 3));
+                        dff = abs(scl_hz - m1);
+                        if (dff < odff) {
+                                odff = dff;
+                                cdfm = cdf;
+                                scgdm = scgd;
+                        }
+                }
+        }
+        /* fail if more than 25% off of requested SCL */
+        if (odff > (scl_hz >> 2))
+                return -EINVAL;
+
+        /* create a CCR register value */
+        return ((scgdm << 2) | cdfm);
+}
+
+static int __devinit sh7760_i2c_probe(struct platform_device *pdev)
+{
+        struct sh7760_i2c_platdata *pd;
+        struct resource *res;
+        struct cami2c *id;
+        int ret;
+
+        pd = pdev->dev.platform_data;
+        if (!pd) {
+                dev_err(&pdev->dev, "no platform_data!\n");
+                ret = -ENODEV;
+                goto out0;
+        }
+
+        id = kzalloc(sizeof(struct cami2c), GFP_KERNEL);
+        if (!id) {
+                dev_err(&pdev->dev, "no mem for private data\n");
+                ret = -ENOMEM;
+                goto out0;
+        }
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res) {
+                dev_err(&pdev->dev, "no mmio resources\n");
+                ret = -ENODEV;
+                goto out1;
+        }
+
+        id->ioarea = request_mem_region(res->start, REGSIZE, pdev->name);
+        if (!id->ioarea) {
+                dev_err(&pdev->dev, "mmio already reserved\n");
+                ret = -EBUSY;
+                goto out1;
+        }
+
+        id->iobase = ioremap(res->start, REGSIZE);
+        if (!id->iobase) {
+                dev_err(&pdev->dev, "cannot ioremap\n");
+                ret = -ENODEV;
+                goto out2;
+        }
+
+        id->irq = platform_get_irq(pdev, 0);
+
+        id->adap.nr = pdev->id;
+        id->adap.algo = &sh7760_i2c_algo;
+        id->adap.class = I2C_CLASS_ALL;
+        id->adap.retries = 3;
+        id->adap.algo_data = id;
+        id->adap.dev.parent = &pdev->dev;
+        snprintf(id->adap.name, sizeof(id->adap.name),
+                "SH7760 I2C at %08lx", (unsigned long)res->start);
+
+        OUT32(id, I2CMCR, 0);
+        OUT32(id, I2CMSR, 0);
+        OUT32(id, I2CMIER, 0);
+        OUT32(id, I2CMAR, 0);
+        OUT32(id, I2CSIER, 0);
+        OUT32(id, I2CSAR, 0);
+        OUT32(id, I2CSCR, 0);
+        OUT32(id, I2CSSR, 0);
+        OUT32(id, I2CFIER, 0);
+        OUT32(id, I2CFCR, FCR_RFRST | FCR_TFRST);
+        OUT32(id, I2CFSR, 0);
+
+        ret = calc_CCR(pd->speed_khz * 1000);
+        if (ret < 0) {
+                dev_err(&pdev->dev, "invalid SCL clock: %dkHz\n",
+                        pd->speed_khz);
+                goto out3;
+        }
+        OUT32(id, I2CCCR, ret);
+
+        if (request_irq(id->irq, sh7760_i2c_irq, IRQF_DISABLED,
+                        SH7760_I2C_DEVNAME, id)) {
+                dev_err(&pdev->dev, "cannot get irq %d\n", id->irq);
+                ret = -EBUSY;
+                goto out3;
+        }
+
+        ret = i2c_add_numbered_adapter(&id->adap);
+        if (ret < 0) {
+                dev_err(&pdev->dev, "reg adap failed: %d\n", ret);
+                goto out4;
+        }
+
+        platform_set_drvdata(pdev, id);
+
+        dev_info(&pdev->dev, "%d kHz mmio %08x irq %d\n",
+                 pd->speed_khz, res->start, id->irq);
+
+        return 0;
+
+out4:
+        free_irq(id->irq, id);
+out3:
+        iounmap(id->iobase);
+out2:
+        release_resource(id->ioarea);
+        kfree(id->ioarea);
+out1:
+        kfree(id);
+out0:
+        return ret;
+}
+
+static int __devexit sh7760_i2c_remove(struct platform_device *pdev)
+{
+        struct cami2c *id = platform_get_drvdata(pdev);
+
+        i2c_del_adapter(&id->adap);
+        free_irq(id->irq, id);
+        iounmap(id->iobase);
+        release_resource(id->ioarea);
+        kfree(id->ioarea);
+        kfree(id);
+        platform_set_drvdata(pdev, NULL);
+
+        return 0;
+}
+
+static struct platform_driver sh7760_i2c_drv = {
+        .driver = {
+                .name   = SH7760_I2C_DEVNAME,
+                .owner  = THIS_MODULE,
+        },
+        .probe          = sh7760_i2c_probe,
+        .remove         = __devexit_p(sh7760_i2c_remove),
+};
+
+static int __init sh7760_i2c_init(void)
+{
+        return platform_driver_register(&sh7760_i2c_drv);
+}
+
+static void __exit sh7760_i2c_exit(void)
+{
+        platform_driver_unregister(&sh7760_i2c_drv);
+}
+
+module_init(sh7760_i2c_init);
+module_exit(sh7760_i2c_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SH7760 I2C bus driver");
+MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");