aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/wan/Kconfig97
-rw-r--r--drivers/net/wan/Makefile13
-rw-r--r--drivers/net/wan/sdla_chdlc.c4428
-rw-r--r--drivers/net/wan/sdla_fr.c5061
-rw-r--r--drivers/net/wan/sdla_ft1.c345
-rw-r--r--drivers/net/wan/sdla_ppp.c3430
-rw-r--r--drivers/net/wan/sdla_x25.c5497
-rw-r--r--drivers/net/wan/sdladrv.c2314
-rw-r--r--drivers/net/wan/sdlamain.c1346
-rw-r--r--drivers/net/wan/wanpipe_multppp.c2358
10 files changed, 0 insertions, 24889 deletions
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 883cf7da10fc..b5328b0ff927 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -410,103 +410,6 @@ config WAN_ROUTER_DRIVERS
410 410
411 If unsure, say N. 411 If unsure, say N.
412 412
413config VENDOR_SANGOMA
414 tristate "Sangoma WANPIPE(tm) multiprotocol cards"
415 depends on WAN_ROUTER_DRIVERS && WAN_ROUTER && (PCI || ISA) && BROKEN
416 ---help---
417 Driver for S514-PCI/ISA Synchronous Data Link Adapters (SDLA).
418
419 WANPIPE from Sangoma Technologies Inc. <http://www.sangoma.com/>
420 is a family of intelligent multiprotocol WAN adapters with data
421 transfer rates up to 4Mbps. Cards support:
422
423 - X.25, Frame Relay, PPP, Cisco HDLC protocols.
424
425 - API for protocols like HDLC (LAPB), HDLC Streaming, X.25,
426 Frame Relay and BiSync.
427
428 - Ethernet Bridging over Frame Relay protocol.
429
430 - MULTILINK PPP
431
432 - Async PPP (Modem Dialup)
433
434 The next questions will ask you about the protocols you want
435 the driver to support.
436
437 If you have one or more of these cards, say M to this option;
438 and read <file:Documentation/networking/wan-router.txt>.
439
440 To compile this driver as a module, choose M here: the
441 module will be called wanpipe.
442
443config WANPIPE_CHDLC
444 bool "WANPIPE Cisco HDLC support"
445 depends on VENDOR_SANGOMA
446 ---help---
447 Connect a WANPIPE card to a leased line using the Cisco HDLC.
448
449 - Supports Dual Port Cisco HDLC on the S514-PCI/S508-ISA cards
450 which allows user to build applications using the HDLC streaming API.
451
452 - CHDLC Streaming MULTILINK PPP that can bind multiple WANPIPE T1
453 cards into a single logical channel.
454
455 Say Y and the Cisco HDLC support, HDLC streaming API and
456 MULTILINK PPP will be included in the driver.
457
458config WANPIPE_FR
459 bool "WANPIPE Frame Relay support"
460 depends on VENDOR_SANGOMA
461 help
462 Connect a WANPIPE card to a Frame Relay network, or use Frame Relay
463 API to develop custom applications.
464
465 Contains the Ethernet Bridging over Frame Relay feature, where
466 a WANPIPE frame relay link can be directly connected to the Linux
467 kernel bridge. The Frame Relay option is supported on S514-PCI
468 and S508-ISA cards.
469
470 Say Y and the Frame Relay support will be included in the driver.
471
472config WANPIPE_X25
473 bool "WANPIPE X.25 support"
474 depends on VENDOR_SANGOMA
475 help
476 Connect a WANPIPE card to an X.25 network.
477
478 Includes the X.25 API support for custom applications over the
479 X.25 protocol. The X.25 option is supported on S514-PCI and
480 S508-ISA cards.
481
482 Say Y and the X.25 support will be included in the driver.
483
484config WANPIPE_PPP
485 bool "WANPIPE PPP support"
486 depends on VENDOR_SANGOMA
487 help
488 Connect a WANPIPE card to a leased line using Point-to-Point
489 Protocol (PPP).
490
491 The PPP option is supported on S514-PCI/S508-ISA cards.
492
493 Say Y and the PPP support will be included in the driver.
494
495config WANPIPE_MULTPPP
496 bool "WANPIPE Multi-Port PPP support"
497 depends on VENDOR_SANGOMA
498 help
499 Connect a WANPIPE card to a leased line using Point-to-Point
500 Protocol (PPP).
501
502 Uses in-kernel SyncPPP protocol over the Sangoma HDLC Streaming
503 adapter. In this case each Sangoma adapter port can support an
504 independent PPP connection. For example, a single Quad-Port PCI
505 adapter can support up to four independent PPP links. The PPP
506 option is supported on S514-PCI/S508-ISA cards.
507
508 Say Y and the Multi-Port PPP support will be included in the driver.
509
510config CYCLADES_SYNC 413config CYCLADES_SYNC
511 tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)" 414 tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)"
512 depends on WAN_ROUTER_DRIVERS && (PCI || ISA) 415 depends on WAN_ROUTER_DRIVERS && (PCI || ISA)
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index ce6c56b903e7..823c6d5ab90d 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -5,14 +5,6 @@
5# Rewritten to use lists instead of if-statements. 5# Rewritten to use lists instead of if-statements.
6# 6#
7 7
8wanpipe-y := sdlamain.o sdla_ft1.o
9wanpipe-$(CONFIG_WANPIPE_X25) += sdla_x25.o
10wanpipe-$(CONFIG_WANPIPE_FR) += sdla_fr.o
11wanpipe-$(CONFIG_WANPIPE_CHDLC) += sdla_chdlc.o
12wanpipe-$(CONFIG_WANPIPE_PPP) += sdla_ppp.o
13wanpipe-$(CONFIG_WANPIPE_MULTPPP) += wanpipe_multppp.o
14wanpipe-objs := $(wanpipe-y)
15
16cyclomx-y := cycx_main.o 8cyclomx-y := cycx_main.o
17cyclomx-$(CONFIG_CYCLOMX_X25) += cycx_x25.o 9cyclomx-$(CONFIG_CYCLOMX_X25) += cycx_x25.o
18cyclomx-objs := $(cyclomx-y) 10cyclomx-objs := $(cyclomx-y)
@@ -43,11 +35,6 @@ obj-$(CONFIG_LANMEDIA) += lmc/
43 35
44obj-$(CONFIG_DLCI) += dlci.o 36obj-$(CONFIG_DLCI) += dlci.o
45obj-$(CONFIG_SDLA) += sdla.o 37obj-$(CONFIG_SDLA) += sdla.o
46ifeq ($(CONFIG_WANPIPE_MULTPPP),y)
47 obj-$(CONFIG_VENDOR_SANGOMA) += sdladrv.o wanpipe.o syncppp.o
48else
49 obj-$(CONFIG_VENDOR_SANGOMA) += sdladrv.o wanpipe.o
50endif
51obj-$(CONFIG_CYCLADES_SYNC) += cycx_drv.o cyclomx.o 38obj-$(CONFIG_CYCLADES_SYNC) += cycx_drv.o cyclomx.o
52obj-$(CONFIG_LAPBETHER) += lapbether.o 39obj-$(CONFIG_LAPBETHER) += lapbether.o
53obj-$(CONFIG_SBNI) += sbni.o 40obj-$(CONFIG_SBNI) += sbni.o
diff --git a/drivers/net/wan/sdla_chdlc.c b/drivers/net/wan/sdla_chdlc.c
deleted file mode 100644
index 496d29237e92..000000000000
--- a/drivers/net/wan/sdla_chdlc.c
+++ /dev/null
@@ -1,4428 +0,0 @@
1/*****************************************************************************
2* sdla_chdlc.c WANPIPE(tm) Multiprotocol WAN Link Driver. Cisco HDLC module.
3*
4* Authors: Nenad Corbic <ncorbic@sangoma.com>
5* Gideon Hack
6*
7* Copyright: (c) 1995-2001 Sangoma Technologies Inc.
8*
9* This program is free software; you can redistribute it and/or
10* modify it under the terms of the GNU General Public License
11* as published by the Free Software Foundation; either version
12* 2 of the License, or (at your option) any later version.
13* ============================================================================
14* Feb 28, 2001 Nenad Corbic Updated if_tx_timeout() routine for
15* 2.4.X kernels.
16* Jan 25, 2001 Nenad Corbic Added a TTY Sync serial driver over the
17* HDLC streaming protocol
18* Added a TTY Async serial driver over the
19* Async protocol.
20* Dec 15, 2000 Nenad Corbic Updated for 2.4.X Kernel support
21* Nov 13, 2000 Nenad Corbic Added true interface type encoding option.
22* Tcpdump doesn't support CHDLC inteface
23* types, to fix this "true type" option will set
24* the interface type to RAW IP mode.
25* Nov 07, 2000 Nenad Corbic Added security features for UDP debugging:
26* Deny all and specify allowed requests.
27* Jun 20, 2000 Nenad Corbic Fixed the API IP ERROR bug. Caused by the
28* latest update.
29* May 09, 2000 Nenad Corbic Option to bring down an interface
30* upon disconnect.
31* Mar 23, 2000 Nenad Corbic Improved task queue, bh handling.
32* Mar 16, 2000 Nenad Corbic Fixed the SLARP Dynamic IP addressing.
33* Mar 06, 2000 Nenad Corbic Bug Fix: corrupted mbox recovery.
34* Feb 10, 2000 Gideon Hack Added ASYNC support.
35* Feb 09, 2000 Nenad Corbic Fixed two shutdown bugs in update() and
36* if_stats() functions.
37* Jan 24, 2000 Nenad Corbic Fixed a startup wanpipe state racing,
38* condition between if_open and isr.
39* Jan 10, 2000 Nenad Corbic Added new socket API support.
40* Dev 15, 1999 Nenad Corbic Fixed up header files for 2.0.X kernels
41* Nov 20, 1999 Nenad Corbic Fixed zero length API bug.
42* Sep 30, 1999 Nenad Corbic Fixed dynamic IP and route setup.
43* Sep 23, 1999 Nenad Corbic Added SMP support, fixed tracing
44* Sep 13, 1999 Nenad Corbic Split up Port 0 and 1 into separate devices.
45* Jun 02, 1999 Gideon Hack Added support for the S514 adapter.
46* Oct 30, 1998 Jaspreet Singh Added Support for CHDLC API (HDLC STREAMING).
47* Oct 28, 1998 Jaspreet Singh Added Support for Dual Port CHDLC.
48* Aug 07, 1998 David Fong Initial version.
49*****************************************************************************/
50
51#include <linux/module.h>
52#include <linux/kernel.h> /* printk(), and other useful stuff */
53#include <linux/stddef.h> /* offsetof(), etc. */
54#include <linux/errno.h> /* return codes */
55#include <linux/string.h> /* inline memset(), etc. */
56#include <linux/slab.h> /* kmalloc(), kfree() */
57#include <linux/wanrouter.h> /* WAN router definitions */
58#include <linux/wanpipe.h> /* WANPIPE common user API definitions */
59#include <linux/if_arp.h> /* ARPHRD_* defines */
60
61
62#include <asm/uaccess.h>
63#include <linux/inetdevice.h>
64#include <linux/netdevice.h>
65
66#include <linux/in.h> /* sockaddr_in */
67#include <linux/inet.h>
68#include <linux/if.h>
69#include <asm/byteorder.h> /* htons(), etc. */
70#include <linux/sdlapci.h>
71#include <asm/io.h>
72
73#include <linux/sdla_chdlc.h> /* CHDLC firmware API definitions */
74#include <linux/sdla_asy.h> /* CHDLC (async) API definitions */
75
76#include <linux/if_wanpipe_common.h> /* Socket Driver common area */
77#include <linux/if_wanpipe.h>
78
79/* TTY Includes */
80#include <linux/tty.h>
81#include <linux/tty_flip.h>
82#include <linux/serial.h>
83
84
85/****** Defines & Macros ****************************************************/
86
87/* reasons for enabling the timer interrupt on the adapter */
88#define TMR_INT_ENABLED_UDP 0x01
89#define TMR_INT_ENABLED_UPDATE 0x02
90#define TMR_INT_ENABLED_CONFIG 0x10
91
92#define MAX_IP_ERRORS 10
93
94#define TTY_CHDLC_MAX_MTU 2000
95#define CHDLC_DFLT_DATA_LEN 1500 /* default MTU */
96#define CHDLC_HDR_LEN 1
97
98#define CHDLC_API 0x01
99
100#define PORT(x) (x == 0 ? "PRIMARY" : "SECONDARY" )
101#define MAX_BH_BUFF 10
102
103//#define PRINT_DEBUG
104#ifdef PRINT_DEBUG
105#define dbg_printk(format, a...) printk(format, ## a)
106#else
107#define dbg_printk(format, a...)
108#endif
109
110/******Data Structures*****************************************************/
111
112/* This structure is placed in the private data area of the device structure.
113 * The card structure used to occupy the private area but now the following
114 * structure will incorporate the card structure along with CHDLC specific data
115 */
116
117typedef struct chdlc_private_area
118{
119 wanpipe_common_t common;
120 sdla_t *card;
121 int TracingEnabled; /* For enabling Tracing */
122 unsigned long curr_trace_addr; /* Used for Tracing */
123 unsigned long start_trace_addr;
124 unsigned long end_trace_addr;
125 unsigned long base_addr_trace_buffer;
126 unsigned long end_addr_trace_buffer;
127 unsigned short number_trace_elements;
128 unsigned available_buffer_space;
129 unsigned long router_start_time;
130 unsigned char route_status;
131 unsigned char route_removed;
132 unsigned long tick_counter; /* For 5s timeout counter */
133 unsigned long router_up_time;
134 u32 IP_address; /* IP addressing */
135 u32 IP_netmask;
136 u32 ip_local;
137 u32 ip_remote;
138 u32 ip_local_tmp;
139 u32 ip_remote_tmp;
140 u8 ip_error;
141 u8 config_chdlc;
142 u8 config_chdlc_timeout;
143 unsigned char mc; /* Mulitcast support on/off */
144 unsigned short udp_pkt_lgth; /* udp packet processing */
145 char udp_pkt_src;
146 char udp_pkt_data[MAX_LGTH_UDP_MGNT_PKT];
147 unsigned short timer_int_enabled;
148 char update_comms_stats; /* updating comms stats */
149
150 bh_data_t *bh_head; /* Circular buffer for chdlc_bh */
151 unsigned long tq_working;
152 volatile int bh_write;
153 volatile int bh_read;
154 atomic_t bh_buff_used;
155
156 unsigned char interface_down;
157
158 /* Polling work queue entry. Each interface
159 * has its own work queue entry, which is used
160 * to defer events from the interrupt */
161 struct work_struct poll_work;
162 struct timer_list poll_delay_timer;
163
164 u8 gateway;
165 u8 true_if_encoding;
166 //FIXME: add driver stats as per frame relay!
167
168} chdlc_private_area_t;
169
170/* Route Status options */
171#define NO_ROUTE 0x00
172#define ADD_ROUTE 0x01
173#define ROUTE_ADDED 0x02
174#define REMOVE_ROUTE 0x03
175
176
177/* variable for keeping track of enabling/disabling FT1 monitor status */
178static int rCount = 0;
179
180/* variable for tracking how many interfaces to open for WANPIPE on the
181 two ports */
182
183extern void disable_irq(unsigned int);
184extern void enable_irq(unsigned int);
185
186/****** Function Prototypes *************************************************/
187/* WAN link driver entry points. These are called by the WAN router module. */
188static int update(struct wan_device* wandev);
189static int new_if(struct wan_device* wandev, struct net_device* dev,
190 wanif_conf_t* conf);
191
192/* Network device interface */
193static int if_init(struct net_device* dev);
194static int if_open(struct net_device* dev);
195static int if_close(struct net_device* dev);
196static int if_header(struct sk_buff* skb, struct net_device* dev,
197 unsigned short type, void* daddr, void* saddr,
198 unsigned len);
199
200static int if_rebuild_hdr (struct sk_buff *skb);
201static struct net_device_stats* if_stats(struct net_device* dev);
202
203static int if_send(struct sk_buff* skb, struct net_device* dev);
204
205/* CHDLC Firmware interface functions */
206static int chdlc_configure (sdla_t* card, void* data);
207static int chdlc_comm_enable (sdla_t* card);
208static int chdlc_read_version (sdla_t* card, char* str);
209static int chdlc_set_intr_mode (sdla_t* card, unsigned mode);
210static int chdlc_send (sdla_t* card, void* data, unsigned len);
211static int chdlc_read_comm_err_stats (sdla_t* card);
212static int chdlc_read_op_stats (sdla_t* card);
213static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb);
214
215
216static int chdlc_disable_comm_shutdown (sdla_t *card);
217static void if_tx_timeout(struct net_device *dev);
218
219/* Miscellaneous CHDLC Functions */
220static int set_chdlc_config (sdla_t* card);
221static void init_chdlc_tx_rx_buff( sdla_t* card);
222static int process_chdlc_exception(sdla_t *card);
223static int process_global_exception(sdla_t *card);
224static int update_comms_stats(sdla_t* card,
225 chdlc_private_area_t* chdlc_priv_area);
226static int configure_ip (sdla_t* card);
227static int unconfigure_ip (sdla_t* card);
228static void process_route(sdla_t *card);
229static void port_set_state (sdla_t *card, int);
230static int config_chdlc (sdla_t *card);
231static void disable_comm (sdla_t *card);
232
233static void trigger_chdlc_poll(struct net_device *dev);
234static void chdlc_poll(struct net_device *dev);
235static void chdlc_poll_delay (unsigned long dev_ptr);
236
237
238/* Miscellaneous asynchronous interface Functions */
239static int set_asy_config (sdla_t* card);
240static int asy_comm_enable (sdla_t* card);
241
242/* Interrupt handlers */
243static void wpc_isr (sdla_t* card);
244static void rx_intr (sdla_t* card);
245static void timer_intr(sdla_t *);
246
247/* Bottom half handlers */
248static void chdlc_work(struct net_device *dev);
249static int chdlc_work_cleanup(struct net_device *dev);
250static int bh_enqueue(struct net_device *dev, struct sk_buff *skb);
251
252/* Miscellaneous functions */
253static int chk_bcast_mcast_addr(sdla_t* card, struct net_device* dev,
254 struct sk_buff *skb);
255static int reply_udp( unsigned char *data, unsigned int mbox_len );
256static int intr_test( sdla_t* card);
257static int udp_pkt_type( struct sk_buff *skb , sdla_t* card);
258static int store_udp_mgmt_pkt(char udp_pkt_src, sdla_t* card,
259 struct sk_buff *skb, struct net_device* dev,
260 chdlc_private_area_t* chdlc_priv_area);
261static int process_udp_mgmt_pkt(sdla_t* card, struct net_device* dev,
262 chdlc_private_area_t* chdlc_priv_area);
263static unsigned short calc_checksum (char *, int);
264static void s508_lock (sdla_t *card, unsigned long *smp_flags);
265static void s508_unlock (sdla_t *card, unsigned long *smp_flags);
266
267
268static int Intr_test_counter;
269
270/* TTY Global Definitions */
271
272#define NR_PORTS 4
273#define WAN_TTY_MAJOR 226
274#define WAN_TTY_MINOR 0
275
276#define WAN_CARD(port) (tty_card_map[port])
277#define MIN_PORT 0
278#define MAX_PORT NR_PORTS-1
279
280#define CRC_LENGTH 2
281
282static int wanpipe_tty_init(sdla_t *card);
283static void wanpipe_tty_receive(sdla_t *, unsigned, unsigned int);
284static void wanpipe_tty_trigger_poll(sdla_t *card);
285
286static struct tty_driver serial_driver;
287static int tty_init_cnt=0;
288
289static struct serial_state rs_table[NR_PORTS];
290
291static char tty_driver_mode=WANOPT_TTY_SYNC;
292
293static char *opt_decode[] = {"NONE","CRTSCTS","XONXOFF-RX",
294 "CRTSCTS XONXOFF-RX","XONXOFF-TX",
295 "CRTSCTS XONXOFF-TX","CRTSCTS XONXOFF"};
296static char *p_decode[] = {"NONE","ODD","EVEN"};
297
298static void* tty_card_map[NR_PORTS] = {NULL,NULL,NULL,NULL};
299
300
301/****** Public Functions ****************************************************/
302
303/*============================================================================
304 * Cisco HDLC protocol initialization routine.
305 *
306 * This routine is called by the main WANPIPE module during setup. At this
307 * point adapter is completely initialized and firmware is running.
308 * o read firmware version (to make sure it's alive)
309 * o configure adapter
310 * o initialize protocol-specific fields of the adapter data space.
311 *
312 * Return: 0 o.k.
313 * < 0 failure.
314 */
315int wpc_init (sdla_t* card, wandev_conf_t* conf)
316{
317 unsigned char port_num;
318 int err;
319 unsigned long max_permitted_baud = 0;
320 SHARED_MEMORY_INFO_STRUCT *flags;
321
322 union
323 {
324 char str[80];
325 } u;
326 volatile CHDLC_MAILBOX_STRUCT* mb;
327 CHDLC_MAILBOX_STRUCT* mb1;
328 unsigned long timeout;
329
330 /* Verify configuration ID */
331 if (conf->config_id != WANCONFIG_CHDLC) {
332 printk(KERN_INFO "%s: invalid configuration ID %u!\n",
333 card->devname, conf->config_id);
334 return -EINVAL;
335 }
336
337 /* Find out which Port to use */
338 if ((conf->comm_port == WANOPT_PRI) || (conf->comm_port == WANOPT_SEC)){
339 if (card->next){
340
341 if (conf->comm_port != card->next->u.c.comm_port){
342 card->u.c.comm_port = conf->comm_port;
343 }else{
344 printk(KERN_INFO "%s: ERROR - %s port used!\n",
345 card->wandev.name, PORT(conf->comm_port));
346 return -EINVAL;
347 }
348 }else{
349 card->u.c.comm_port = conf->comm_port;
350 }
351 }else{
352 printk(KERN_INFO "%s: ERROR - Invalid Port Selected!\n",
353 card->wandev.name);
354 return -EINVAL;
355 }
356
357
358 /* Initialize protocol-specific fields */
359 if(card->hw.type != SDLA_S514){
360
361 if (card->u.c.comm_port == WANOPT_PRI){
362 card->mbox = (void *) card->hw.dpmbase;
363 }else{
364 card->mbox = (void *) card->hw.dpmbase +
365 SEC_BASE_ADDR_MB_STRUCT - PRI_BASE_ADDR_MB_STRUCT;
366 }
367 }else{
368 /* for a S514 adapter, set a pointer to the actual mailbox in the */
369 /* allocated virtual memory area */
370 if (card->u.c.comm_port == WANOPT_PRI){
371 card->mbox = (void *) card->hw.dpmbase + PRI_BASE_ADDR_MB_STRUCT;
372 }else{
373 card->mbox = (void *) card->hw.dpmbase + SEC_BASE_ADDR_MB_STRUCT;
374 }
375 }
376
377 mb = mb1 = card->mbox;
378
379 if (!card->configured){
380
381 /* The board will place an 'I' in the return code to indicate that it is
382 ready to accept commands. We expect this to be completed in less
383 than 1 second. */
384
385 timeout = jiffies;
386 while (mb->return_code != 'I') /* Wait 1s for board to initialize */
387 if ((jiffies - timeout) > 1*HZ) break;
388
389 if (mb->return_code != 'I') {
390 printk(KERN_INFO
391 "%s: Initialization not completed by adapter\n",
392 card->devname);
393 printk(KERN_INFO "Please contact Sangoma representative.\n");
394 return -EIO;
395 }
396 }
397
398 /* Read firmware version. Note that when adapter initializes, it
399 * clears the mailbox, so it may appear that the first command was
400 * executed successfully when in fact it was merely erased. To work
401 * around this, we execute the first command twice.
402 */
403
404 if (chdlc_read_version(card, u.str))
405 return -EIO;
406
407 printk(KERN_INFO "%s: Running Cisco HDLC firmware v%s\n",
408 card->devname, u.str);
409
410 card->isr = &wpc_isr;
411 card->poll = NULL;
412 card->exec = NULL;
413 card->wandev.update = &update;
414 card->wandev.new_if = &new_if;
415 card->wandev.del_if = NULL;
416 card->wandev.udp_port = conf->udp_port;
417 card->disable_comm = &disable_comm;
418 card->wandev.new_if_cnt = 0;
419
420 /* reset the number of times the 'update()' proc has been called */
421 card->u.c.update_call_count = 0;
422
423 card->wandev.ttl = conf->ttl;
424 card->wandev.interface = conf->interface;
425
426 if ((card->u.c.comm_port == WANOPT_SEC && conf->interface == WANOPT_V35)&&
427 card->hw.type != SDLA_S514){
428 printk(KERN_INFO "%s: ERROR - V35 Interface not supported on S508 %s port \n",
429 card->devname, PORT(card->u.c.comm_port));
430 return -EIO;
431 }
432
433 card->wandev.clocking = conf->clocking;
434
435 port_num = card->u.c.comm_port;
436
437 /* in API mode, we can configure for "receive only" buffering */
438 if(card->hw.type == SDLA_S514) {
439 card->u.c.receive_only = conf->receive_only;
440 if(conf->receive_only) {
441 printk(KERN_INFO
442 "%s: Configured for 'receive only' mode\n",
443 card->devname);
444 }
445 }
446
447 /* Setup Port Bps */
448
449 if(card->wandev.clocking) {
450 if((port_num == WANOPT_PRI) || card->u.c.receive_only) {
451 /* For Primary Port 0 */
452 max_permitted_baud =
453 (card->hw.type == SDLA_S514) ?
454 PRI_MAX_BAUD_RATE_S514 :
455 PRI_MAX_BAUD_RATE_S508;
456
457 }else if(port_num == WANOPT_SEC) {
458 /* For Secondary Port 1 */
459 max_permitted_baud =
460 (card->hw.type == SDLA_S514) ?
461 SEC_MAX_BAUD_RATE_S514 :
462 SEC_MAX_BAUD_RATE_S508;
463 }
464
465 if(conf->bps > max_permitted_baud) {
466 conf->bps = max_permitted_baud;
467 printk(KERN_INFO "%s: Baud too high!\n",
468 card->wandev.name);
469 printk(KERN_INFO "%s: Baud rate set to %lu bps\n",
470 card->wandev.name, max_permitted_baud);
471 }
472 card->wandev.bps = conf->bps;
473 }else{
474 card->wandev.bps = 0;
475 }
476
477 /* Setup the Port MTU */
478 if((port_num == WANOPT_PRI) || card->u.c.receive_only) {
479
480 /* For Primary Port 0 */
481 card->wandev.mtu =
482 (conf->mtu >= MIN_LGTH_CHDLC_DATA_CFG) ?
483 min_t(unsigned int, conf->mtu, PRI_MAX_NO_DATA_BYTES_IN_FRAME) :
484 CHDLC_DFLT_DATA_LEN;
485 } else if(port_num == WANOPT_SEC) {
486 /* For Secondary Port 1 */
487 card->wandev.mtu =
488 (conf->mtu >= MIN_LGTH_CHDLC_DATA_CFG) ?
489 min_t(unsigned int, conf->mtu, SEC_MAX_NO_DATA_BYTES_IN_FRAME) :
490 CHDLC_DFLT_DATA_LEN;
491 }
492
493 /* Set up the interrupt status area */
494 /* Read the CHDLC Configuration and obtain:
495 * Ptr to shared memory infor struct
496 * Use this pointer to calculate the value of card->u.c.flags !
497 */
498 mb1->buffer_length = 0;
499 mb1->command = READ_CHDLC_CONFIGURATION;
500 err = sdla_exec(mb1) ? mb1->return_code : CMD_TIMEOUT;
501 if(err != COMMAND_OK) {
502 if(card->hw.type != SDLA_S514)
503 enable_irq(card->hw.irq);
504
505 chdlc_error(card, err, mb1);
506 return -EIO;
507 }
508
509 if(card->hw.type == SDLA_S514){
510 card->u.c.flags = (void *)(card->hw.dpmbase +
511 (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)->
512 ptr_shared_mem_info_struct));
513 }else{
514 card->u.c.flags = (void *)(card->hw.dpmbase +
515 (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)->
516 ptr_shared_mem_info_struct % SDLA_WINDOWSIZE));
517 }
518
519 flags = card->u.c.flags;
520
521 /* This is for the ports link state */
522 card->wandev.state = WAN_DUALPORT;
523 card->u.c.state = WAN_DISCONNECTED;
524
525
526 if (!card->wandev.piggyback){
527 int err;
528
529 /* Perform interrupt testing */
530 err = intr_test(card);
531
532 if(err || (Intr_test_counter < MAX_INTR_TEST_COUNTER)) {
533 printk(KERN_INFO "%s: Interrupt test failed (%i)\n",
534 card->devname, Intr_test_counter);
535 printk(KERN_INFO "%s: Please choose another interrupt\n",
536 card->devname);
537 return -EIO;
538 }
539
540 printk(KERN_INFO "%s: Interrupt test passed (%i)\n",
541 card->devname, Intr_test_counter);
542 card->configured = 1;
543 }
544
545 if ((card->tty_opt=conf->tty) == WANOPT_YES){
546 int err;
547 card->tty_minor = conf->tty_minor;
548
549 /* On ASYNC connections internal clocking
550 * is mandatory */
551 if ((card->u.c.async_mode = conf->tty_mode)){
552 card->wandev.clocking = 1;
553 }
554 err=wanpipe_tty_init(card);
555 if (err){
556 return err;
557 }
558 }else{
559
560
561 if (chdlc_set_intr_mode(card, APP_INT_ON_TIMER)){
562 printk (KERN_INFO "%s: "
563 "Failed to set interrupt triggers!\n",
564 card->devname);
565 return -EIO;
566 }
567
568 /* Mask the Timer interrupt */
569 flags->interrupt_info_struct.interrupt_permission &=
570 ~APP_INT_ON_TIMER;
571 }
572
573 /* If we are using CHDLC in backup mode, this flag will
574 * indicate not to look for IP addresses in config_chdlc()*/
575 card->u.c.backup = conf->backup;
576
577 printk(KERN_INFO "\n");
578
579 return 0;
580}
581
582/******* WAN Device Driver Entry Points *************************************/
583
584/*============================================================================
585 * Update device status & statistics
586 * This procedure is called when updating the PROC file system and returns
587 * various communications statistics. These statistics are accumulated from 3
588 * different locations:
589 * 1) The 'if_stats' recorded for the device.
590 * 2) Communication error statistics on the adapter.
591 * 3) CHDLC operational statistics on the adapter.
592 * The board level statistics are read during a timer interrupt. Note that we
593 * read the error and operational statistics during consecitive timer ticks so
594 * as to minimize the time that we are inside the interrupt handler.
595 *
596 */
597static int update(struct wan_device* wandev)
598{
599 sdla_t* card = wandev->private;
600 struct net_device* dev;
601 volatile chdlc_private_area_t* chdlc_priv_area;
602 SHARED_MEMORY_INFO_STRUCT *flags;
603 unsigned long timeout;
604
605 /* sanity checks */
606 if((wandev == NULL) || (wandev->private == NULL))
607 return -EFAULT;
608
609 if(wandev->state == WAN_UNCONFIGURED)
610 return -ENODEV;
611
612 /* more sanity checks */
613 if(!card->u.c.flags)
614 return -ENODEV;
615
616 if(test_bit(PERI_CRIT, (void*)&card->wandev.critical))
617 return -EAGAIN;
618
619 if((dev=card->wandev.dev) == NULL)
620 return -ENODEV;
621
622 if((chdlc_priv_area=dev->priv) == NULL)
623 return -ENODEV;
624
625 flags = card->u.c.flags;
626 if(chdlc_priv_area->update_comms_stats){
627 return -EAGAIN;
628 }
629
630 /* we will need 2 timer interrupts to complete the */
631 /* reading of the statistics */
632 chdlc_priv_area->update_comms_stats = 2;
633 flags->interrupt_info_struct.interrupt_permission |= APP_INT_ON_TIMER;
634 chdlc_priv_area->timer_int_enabled = TMR_INT_ENABLED_UPDATE;
635
636 /* wait a maximum of 1 second for the statistics to be updated */
637 timeout = jiffies;
638 for(;;) {
639 if(chdlc_priv_area->update_comms_stats == 0)
640 break;
641 if ((jiffies - timeout) > (1 * HZ)){
642 chdlc_priv_area->update_comms_stats = 0;
643 chdlc_priv_area->timer_int_enabled &=
644 ~TMR_INT_ENABLED_UPDATE;
645 return -EAGAIN;
646 }
647 }
648
649 return 0;
650}
651
652
653/*============================================================================
654 * Create new logical channel.
655 * This routine is called by the router when ROUTER_IFNEW IOCTL is being
656 * handled.
657 * o parse media- and hardware-specific configuration
658 * o make sure that a new channel can be created
659 * o allocate resources, if necessary
660 * o prepare network device structure for registaration.
661 *
662 * Return: 0 o.k.
663 * < 0 failure (channel will not be created)
664 */
665static int new_if(struct wan_device* wandev, struct net_device* dev,
666 wanif_conf_t* conf)
667{
668 sdla_t* card = wandev->private;
669 chdlc_private_area_t* chdlc_priv_area;
670
671
672 printk(KERN_INFO "%s: Configuring Interface: %s\n",
673 card->devname, conf->name);
674
675 if ((conf->name[0] == '\0') || (strlen(conf->name) > WAN_IFNAME_SZ)) {
676 printk(KERN_INFO "%s: Invalid interface name!\n",
677 card->devname);
678 return -EINVAL;
679 }
680
681 /* allocate and initialize private data */
682 chdlc_priv_area = kmalloc(sizeof(chdlc_private_area_t), GFP_KERNEL);
683
684 if(chdlc_priv_area == NULL)
685 return -ENOMEM;
686
687 memset(chdlc_priv_area, 0, sizeof(chdlc_private_area_t));
688
689 chdlc_priv_area->card = card;
690 chdlc_priv_area->common.sk = NULL;
691 chdlc_priv_area->common.func = NULL;
692
693 /* initialize data */
694 strcpy(card->u.c.if_name, conf->name);
695
696 if(card->wandev.new_if_cnt > 0) {
697 kfree(chdlc_priv_area);
698 return -EEXIST;
699 }
700
701 card->wandev.new_if_cnt++;
702
703 chdlc_priv_area->TracingEnabled = 0;
704 chdlc_priv_area->route_status = NO_ROUTE;
705 chdlc_priv_area->route_removed = 0;
706
707 card->u.c.async_mode = conf->async_mode;
708
709 /* setup for asynchronous mode */
710 if(conf->async_mode) {
711 printk(KERN_INFO "%s: Configuring for asynchronous mode\n",
712 wandev->name);
713
714 if(card->u.c.comm_port == WANOPT_PRI) {
715 printk(KERN_INFO
716 "%s:Asynchronous mode on secondary port only\n",
717 wandev->name);
718 kfree(chdlc_priv_area);
719 return -EINVAL;
720 }
721
722 if(strcmp(conf->usedby, "WANPIPE") == 0) {
723 printk(KERN_INFO
724 "%s: Running in WANIPE Async Mode\n", wandev->name);
725 card->u.c.usedby = WANPIPE;
726 }else{
727 card->u.c.usedby = API;
728 }
729
730 if(!card->wandev.clocking) {
731 printk(KERN_INFO
732 "%s: Asynch. clocking must be 'Internal'\n",
733 wandev->name);
734 kfree(chdlc_priv_area);
735 return -EINVAL;
736 }
737
738 if((card->wandev.bps < MIN_ASY_BAUD_RATE) ||
739 (card->wandev.bps > MAX_ASY_BAUD_RATE)) {
740 printk(KERN_INFO "%s: Selected baud rate is invalid.\n",
741 wandev->name);
742 printk(KERN_INFO "Must be between %u and %u bps.\n",
743 MIN_ASY_BAUD_RATE, MAX_ASY_BAUD_RATE);
744 kfree(chdlc_priv_area);
745 return -EINVAL;
746 }
747
748 card->u.c.api_options = 0;
749 if (conf->asy_data_trans == WANOPT_YES) {
750 card->u.c.api_options |= ASY_RX_DATA_TRANSPARENT;
751 }
752
753 card->u.c.protocol_options = 0;
754 if (conf->rts_hs_for_receive == WANOPT_YES) {
755 card->u.c.protocol_options |= ASY_RTS_HS_FOR_RX;
756 }
757 if (conf->xon_xoff_hs_for_receive == WANOPT_YES) {
758 card->u.c.protocol_options |= ASY_XON_XOFF_HS_FOR_RX;
759 }
760 if (conf->xon_xoff_hs_for_transmit == WANOPT_YES) {
761 card->u.c.protocol_options |= ASY_XON_XOFF_HS_FOR_TX;
762 }
763 if (conf->dcd_hs_for_transmit == WANOPT_YES) {
764 card->u.c.protocol_options |= ASY_DCD_HS_FOR_TX;
765 }
766 if (conf->cts_hs_for_transmit == WANOPT_YES) {
767 card->u.c.protocol_options |= ASY_CTS_HS_FOR_TX;
768 }
769
770 card->u.c.tx_bits_per_char = conf->tx_bits_per_char;
771 card->u.c.rx_bits_per_char = conf->rx_bits_per_char;
772 card->u.c.stop_bits = conf->stop_bits;
773 card->u.c.parity = conf->parity;
774 card->u.c.break_timer = conf->break_timer;
775 card->u.c.inter_char_timer = conf->inter_char_timer;
776 card->u.c.rx_complete_length = conf->rx_complete_length;
777 card->u.c.xon_char = conf->xon_char;
778
779 } else { /* setup for synchronous mode */
780
781 card->u.c.protocol_options = 0;
782 if (conf->ignore_dcd == WANOPT_YES){
783 card->u.c.protocol_options |= IGNORE_DCD_FOR_LINK_STAT;
784 }
785 if (conf->ignore_cts == WANOPT_YES){
786 card->u.c.protocol_options |= IGNORE_CTS_FOR_LINK_STAT;
787 }
788
789 if (conf->ignore_keepalive == WANOPT_YES) {
790 card->u.c.protocol_options |=
791 IGNORE_KPALV_FOR_LINK_STAT;
792 card->u.c.kpalv_tx = MIN_Tx_KPALV_TIMER;
793 card->u.c.kpalv_rx = MIN_Rx_KPALV_TIMER;
794 card->u.c.kpalv_err = MIN_KPALV_ERR_TOL;
795
796 } else { /* Do not ignore keepalives */
797 card->u.c.kpalv_tx =
798 ((conf->keepalive_tx_tmr - MIN_Tx_KPALV_TIMER)
799 >= 0) ?
800 min_t(unsigned int, conf->keepalive_tx_tmr,MAX_Tx_KPALV_TIMER) :
801 DEFAULT_Tx_KPALV_TIMER;
802
803 card->u.c.kpalv_rx =
804 ((conf->keepalive_rx_tmr - MIN_Rx_KPALV_TIMER)
805 >= 0) ?
806 min_t(unsigned int, conf->keepalive_rx_tmr,MAX_Rx_KPALV_TIMER) :
807 DEFAULT_Rx_KPALV_TIMER;
808
809 card->u.c.kpalv_err =
810 ((conf->keepalive_err_margin-MIN_KPALV_ERR_TOL)
811 >= 0) ?
812 min_t(unsigned int, conf->keepalive_err_margin,
813 MAX_KPALV_ERR_TOL) :
814 DEFAULT_KPALV_ERR_TOL;
815 }
816
817 /* Setup slarp timer to control delay between slarps */
818 card->u.c.slarp_timer =
819 ((conf->slarp_timer - MIN_SLARP_REQ_TIMER) >= 0) ?
820 min_t(unsigned int, conf->slarp_timer, MAX_SLARP_REQ_TIMER) :
821 DEFAULT_SLARP_REQ_TIMER;
822
823 if (conf->hdlc_streaming == WANOPT_YES) {
824 printk(KERN_INFO "%s: Enabling HDLC STREAMING Mode\n",
825 wandev->name);
826 card->u.c.protocol_options = HDLC_STREAMING_MODE;
827 }
828
829 if ((chdlc_priv_area->true_if_encoding = conf->true_if_encoding) == WANOPT_YES){
830 printk(KERN_INFO
831 "%s: Enabling, true interface type encoding.\n",
832 card->devname);
833 }
834
835 /* Setup wanpipe as a router (WANPIPE) or as an API */
836 if( strcmp(conf->usedby, "WANPIPE") == 0) {
837
838 printk(KERN_INFO "%s: Running in WANPIPE mode!\n",
839 wandev->name);
840 card->u.c.usedby = WANPIPE;
841
842 /* Option to bring down the interface when
843 * the link goes down */
844 if (conf->if_down){
845 set_bit(DYN_OPT_ON,&chdlc_priv_area->interface_down);
846 printk(KERN_INFO
847 "%s: Dynamic interface configuration enabled\n",
848 card->devname);
849 }
850
851 } else if( strcmp(conf->usedby, "API") == 0) {
852 card->u.c.usedby = API;
853 printk(KERN_INFO "%s: Running in API mode !\n",
854 wandev->name);
855 }
856 }
857
858 /* Tells us that if this interface is a
859 * gateway or not */
860 if ((chdlc_priv_area->gateway = conf->gateway) == WANOPT_YES){
861 printk(KERN_INFO "%s: Interface %s is set as a gateway.\n",
862 card->devname,card->u.c.if_name);
863 }
864
865 /* Get Multicast Information */
866 chdlc_priv_area->mc = conf->mc;
867
868 /* prepare network device data space for registration */
869 strcpy(dev->name,card->u.c.if_name);
870
871 dev->init = &if_init;
872 dev->priv = chdlc_priv_area;
873
874 /* Initialize the polling work routine */
875 INIT_WORK(&chdlc_priv_area->poll_work, (void*)(void*)chdlc_poll, dev);
876
877 /* Initialize the polling delay timer */
878 init_timer(&chdlc_priv_area->poll_delay_timer);
879 chdlc_priv_area->poll_delay_timer.data = (unsigned long)dev;
880 chdlc_priv_area->poll_delay_timer.function = chdlc_poll_delay;
881
882 printk(KERN_INFO "\n");
883
884 return 0;
885}
886
887
888/****** Network Device Interface ********************************************/
889
890/*============================================================================
891 * Initialize Linux network interface.
892 *
893 * This routine is called only once for each interface, during Linux network
894 * interface registration. Returning anything but zero will fail interface
895 * registration.
896 */
897static int if_init(struct net_device* dev)
898{
899 chdlc_private_area_t* chdlc_priv_area = dev->priv;
900 sdla_t* card = chdlc_priv_area->card;
901 struct wan_device* wandev = &card->wandev;
902
903 /* Initialize device driver entry points */
904 dev->open = &if_open;
905 dev->stop = &if_close;
906 dev->hard_header = &if_header;
907 dev->rebuild_header = &if_rebuild_hdr;
908 dev->hard_start_xmit = &if_send;
909 dev->get_stats = &if_stats;
910 dev->tx_timeout = &if_tx_timeout;
911 dev->watchdog_timeo = TX_TIMEOUT;
912
913 /* Initialize media-specific parameters */
914 dev->flags |= IFF_POINTOPOINT;
915 dev->flags |= IFF_NOARP;
916
917 /* Enable Mulitcasting if user selected */
918 if (chdlc_priv_area->mc == WANOPT_YES){
919 dev->flags |= IFF_MULTICAST;
920 }
921
922 if (chdlc_priv_area->true_if_encoding){
923 dev->type = ARPHRD_HDLC; /* This breaks the tcpdump */
924 }else{
925 dev->type = ARPHRD_PPP;
926 }
927
928 dev->mtu = card->wandev.mtu;
929 /* for API usage, add the API header size to the requested MTU size */
930 if(card->u.c.usedby == API) {
931 dev->mtu += sizeof(api_tx_hdr_t);
932 }
933
934 dev->hard_header_len = CHDLC_HDR_LEN;
935
936 /* Initialize hardware parameters */
937 dev->irq = wandev->irq;
938 dev->dma = wandev->dma;
939 dev->base_addr = wandev->ioport;
940 dev->mem_start = wandev->maddr;
941 dev->mem_end = wandev->maddr + wandev->msize - 1;
942
943 /* Set transmit buffer queue length
944 * If too low packets will not be retransmitted
945 * by stack.
946 */
947 dev->tx_queue_len = 100;
948 SET_MODULE_OWNER(dev);
949
950 return 0;
951}
952
953/*============================================================================
954 * Open network interface.
955 * o enable communications and interrupts.
956 * o prevent module from unloading by incrementing use count
957 *
958 * Return 0 if O.k. or errno.
959 */
960static int if_open(struct net_device* dev)
961{
962 chdlc_private_area_t* chdlc_priv_area = dev->priv;
963 sdla_t* card = chdlc_priv_area->card;
964 struct timeval tv;
965 int err = 0;
966
967 /* Only one open per interface is allowed */
968
969 if (netif_running(dev))
970 return -EBUSY;
971
972 /* Initialize the work queue entry */
973 chdlc_priv_area->tq_working=0;
974
975 INIT_WORK(&chdlc_priv_area->common.wanpipe_work,
976 (void *)(void *)chdlc_work, dev);
977
978 /* Allocate and initialize BH circular buffer */
979 /* Add 1 to MAX_BH_BUFF so we don't have test with (MAX_BH_BUFF-1) */
980 chdlc_priv_area->bh_head = kmalloc((sizeof(bh_data_t)*(MAX_BH_BUFF+1)),GFP_ATOMIC);
981 memset(chdlc_priv_area->bh_head,0,(sizeof(bh_data_t)*(MAX_BH_BUFF+1)));
982 atomic_set(&chdlc_priv_area->bh_buff_used, 0);
983
984 do_gettimeofday(&tv);
985 chdlc_priv_area->router_start_time = tv.tv_sec;
986
987 netif_start_queue(dev);
988
989 wanpipe_open(card);
990
991 /* TTY is configured during wanpipe_set_termios
992 * call, not here */
993 if (card->tty_opt)
994 return err;
995
996 set_bit(0,&chdlc_priv_area->config_chdlc);
997 chdlc_priv_area->config_chdlc_timeout=jiffies;
998
999 /* Start the CHDLC configuration after 1sec delay.
1000 * This will give the interface initilization time
1001 * to finish its configuration */
1002 mod_timer(&chdlc_priv_area->poll_delay_timer, jiffies + HZ);
1003 return err;
1004}
1005
1006/*============================================================================
1007 * Close network interface.
1008 * o if this is the last close, then disable communications and interrupts.
1009 * o reset flags.
1010 */
1011static int if_close(struct net_device* dev)
1012{
1013 chdlc_private_area_t* chdlc_priv_area = dev->priv;
1014 sdla_t* card = chdlc_priv_area->card;
1015
1016 if (chdlc_priv_area->bh_head){
1017 int i;
1018 struct sk_buff *skb;
1019
1020 for (i=0; i<(MAX_BH_BUFF+1); i++){
1021 skb = ((bh_data_t *)&chdlc_priv_area->bh_head[i])->skb;
1022 if (skb != NULL){
1023 dev_kfree_skb_any(skb);
1024 }
1025 }
1026 kfree(chdlc_priv_area->bh_head);
1027 chdlc_priv_area->bh_head=NULL;
1028 }
1029
1030 netif_stop_queue(dev);
1031 wanpipe_close(card);
1032 del_timer(&chdlc_priv_area->poll_delay_timer);
1033 return 0;
1034}
1035
1036static void disable_comm (sdla_t *card)
1037{
1038 SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags;
1039
1040 if (card->u.c.comm_enabled){
1041 chdlc_disable_comm_shutdown (card);
1042 }else{
1043 flags->interrupt_info_struct.interrupt_permission = 0;
1044 }
1045
1046 if (!tty_init_cnt)
1047 return;
1048
1049 if (card->tty_opt){
1050 struct serial_state * state;
1051 if (!(--tty_init_cnt)){
1052 int e1;
1053 serial_driver.refcount=0;
1054
1055 if ((e1 = tty_unregister_driver(&serial_driver)))
1056 printk("SERIAL: failed to unregister serial driver (%d)\n",
1057 e1);
1058 printk(KERN_INFO "%s: Unregistering TTY Driver, Major %i\n",
1059 card->devname,WAN_TTY_MAJOR);
1060 }
1061 card->tty=NULL;
1062 tty_card_map[card->tty_minor]=NULL;
1063 state = &rs_table[card->tty_minor];
1064 memset(state, 0, sizeof(*state));
1065 }
1066 return;
1067}
1068
1069
1070/*============================================================================
1071 * Build media header.
1072 *
1073 * The trick here is to put packet type (Ethertype) into 'protocol' field of
1074 * the socket buffer, so that we don't forget it. If packet type is not
1075 * supported, set skb->protocol to 0 and discard packet later.
1076 *
1077 * Return: media header length.
1078 */
1079static int if_header(struct sk_buff* skb, struct net_device* dev,
1080 unsigned short type, void* daddr, void* saddr,
1081 unsigned len)
1082{
1083 skb->protocol = htons(type);
1084
1085 return CHDLC_HDR_LEN;
1086}
1087
1088
1089/*============================================================================
1090 * Handle transmit timeout event from netif watchdog
1091 */
1092static void if_tx_timeout(struct net_device *dev)
1093{
1094 chdlc_private_area_t* chan = dev->priv;
1095 sdla_t *card = chan->card;
1096
1097 /* If our device stays busy for at least 5 seconds then we will
1098 * kick start the device by making dev->tbusy = 0. We expect
1099 * that our device never stays busy more than 5 seconds. So this
1100 * is only used as a last resort.
1101 */
1102
1103 ++card->wandev.stats.collisions;
1104
1105 printk (KERN_INFO "%s: Transmit timed out on %s\n", card->devname,dev->name);
1106 netif_wake_queue (dev);
1107}
1108
1109
1110
1111/*============================================================================
1112 * Re-build media header.
1113 *
1114 * Return: 1 physical address resolved.
1115 * 0 physical address not resolved
1116 */
1117static int if_rebuild_hdr (struct sk_buff *skb)
1118{
1119 return 1;
1120}
1121
1122
1123/*============================================================================
1124 * Send a packet on a network interface.
1125 * o set tbusy flag (marks start of the transmission) to block a timer-based
1126 * transmit from overlapping.
1127 * o check link state. If link is not up, then drop the packet.
1128 * o execute adapter send command.
1129 * o free socket buffer
1130 *
1131 * Return: 0 complete (socket buffer must be freed)
1132 * non-0 packet may be re-transmitted (tbusy must be set)
1133 *
1134 * Notes:
1135 * 1. This routine is called either by the protocol stack or by the "net
1136 * bottom half" (with interrupts enabled).
1137 * 2. Setting tbusy flag will inhibit further transmit requests from the
1138 * protocol stack and can be used for flow control with protocol layer.
1139 */
1140static int if_send(struct sk_buff* skb, struct net_device* dev)
1141{
1142 chdlc_private_area_t *chdlc_priv_area = dev->priv;
1143 sdla_t *card = chdlc_priv_area->card;
1144 SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags;
1145 INTERRUPT_INFORMATION_STRUCT *chdlc_int = &flags->interrupt_info_struct;
1146 int udp_type = 0;
1147 unsigned long smp_flags;
1148 int err=0;
1149
1150 netif_stop_queue(dev);
1151
1152 if (skb == NULL){
1153 /* If we get here, some higher layer thinks we've missed an
1154 * tx-done interrupt.
1155 */
1156 printk(KERN_INFO "%s: interface %s got kicked!\n",
1157 card->devname, dev->name);
1158
1159 netif_wake_queue(dev);
1160 return 0;
1161 }
1162
1163 if (ntohs(skb->protocol) != htons(PVC_PROT)){
1164
1165 /* check the udp packet type */
1166
1167 udp_type = udp_pkt_type(skb, card);
1168
1169 if (udp_type == UDP_CPIPE_TYPE){
1170 if(store_udp_mgmt_pkt(UDP_PKT_FRM_STACK, card, skb, dev,
1171 chdlc_priv_area)){
1172 chdlc_int->interrupt_permission |=
1173 APP_INT_ON_TIMER;
1174 }
1175 netif_start_queue(dev);
1176 return 0;
1177 }
1178
1179 /* check to see if the source IP address is a broadcast or */
1180 /* multicast IP address */
1181 if(chk_bcast_mcast_addr(card, dev, skb)){
1182 ++card->wandev.stats.tx_dropped;
1183 dev_kfree_skb_any(skb);
1184 netif_start_queue(dev);
1185 return 0;
1186 }
1187 }
1188
1189 /* Lock the 508 Card: SMP is supported */
1190 if(card->hw.type != SDLA_S514){
1191 s508_lock(card,&smp_flags);
1192 }
1193
1194 if(test_and_set_bit(SEND_CRIT, (void*)&card->wandev.critical)) {
1195
1196 printk(KERN_INFO "%s: Critical in if_send: %lx\n",
1197 card->wandev.name,card->wandev.critical);
1198 ++card->wandev.stats.tx_dropped;
1199 netif_start_queue(dev);
1200 goto if_send_exit_crit;
1201 }
1202
1203 if(card->u.c.state != WAN_CONNECTED){
1204 ++card->wandev.stats.tx_dropped;
1205 netif_start_queue(dev);
1206
1207 }else if(!skb->protocol){
1208 ++card->wandev.stats.tx_errors;
1209 netif_start_queue(dev);
1210
1211 }else {
1212 void* data = skb->data;
1213 unsigned len = skb->len;
1214 unsigned char attr;
1215
1216 /* If it's an API packet pull off the API
1217 * header. Also check that the packet size
1218 * is larger than the API header
1219 */
1220 if (card->u.c.usedby == API){
1221 api_tx_hdr_t* api_tx_hdr;
1222
1223 /* discard the frame if we are configured for */
1224 /* 'receive only' mode or if there is no data */
1225 if (card->u.c.receive_only ||
1226 (len <= sizeof(api_tx_hdr_t))) {
1227
1228 ++card->wandev.stats.tx_dropped;
1229 netif_start_queue(dev);
1230 goto if_send_exit_crit;
1231 }
1232
1233 api_tx_hdr = (api_tx_hdr_t *)data;
1234 attr = api_tx_hdr->attr;
1235 data += sizeof(api_tx_hdr_t);
1236 len -= sizeof(api_tx_hdr_t);
1237 }
1238
1239 if(chdlc_send(card, data, len)) {
1240 netif_stop_queue(dev);
1241 }else{
1242 ++card->wandev.stats.tx_packets;
1243 card->wandev.stats.tx_bytes += len;
1244
1245 netif_start_queue(dev);
1246
1247 dev->trans_start = jiffies;
1248 }
1249 }
1250
1251if_send_exit_crit:
1252
1253 if (!(err=netif_queue_stopped(dev))) {
1254 dev_kfree_skb_any(skb);
1255 }else{
1256 chdlc_priv_area->tick_counter = jiffies;
1257 chdlc_int->interrupt_permission |= APP_INT_ON_TX_FRAME;
1258 }
1259
1260 clear_bit(SEND_CRIT, (void*)&card->wandev.critical);
1261 if(card->hw.type != SDLA_S514){
1262 s508_unlock(card,&smp_flags);
1263 }
1264
1265 return err;
1266}
1267
1268
1269/*============================================================================
1270 * Check to see if the packet to be transmitted contains a broadcast or
1271 * multicast source IP address.
1272 */
1273
1274static int chk_bcast_mcast_addr(sdla_t *card, struct net_device* dev,
1275 struct sk_buff *skb)
1276{
1277 u32 src_ip_addr;
1278 u32 broadcast_ip_addr = 0;
1279 struct in_device *in_dev;
1280
1281 /* read the IP source address from the outgoing packet */
1282 src_ip_addr = *(u32 *)(skb->data + 12);
1283
1284 /* read the IP broadcast address for the device */
1285 in_dev = dev->ip_ptr;
1286 if(in_dev != NULL) {
1287 struct in_ifaddr *ifa= in_dev->ifa_list;
1288 if(ifa != NULL)
1289 broadcast_ip_addr = ifa->ifa_broadcast;
1290 else
1291 return 0;
1292 }
1293
1294 /* check if the IP Source Address is a Broadcast address */
1295 if((dev->flags & IFF_BROADCAST) && (src_ip_addr == broadcast_ip_addr)) {
1296 printk(KERN_INFO "%s: Broadcast Source Address silently discarded\n",
1297 card->devname);
1298 return 1;
1299 }
1300
1301 /* check if the IP Source Address is a Multicast address */
1302 if((ntohl(src_ip_addr) >= 0xE0000001) &&
1303 (ntohl(src_ip_addr) <= 0xFFFFFFFE)) {
1304 printk(KERN_INFO "%s: Multicast Source Address silently discarded\n",
1305 card->devname);
1306 return 1;
1307 }
1308
1309 return 0;
1310}
1311
1312
1313/*============================================================================
1314 * Reply to UDP Management system.
1315 * Return length of reply.
1316 */
1317static int reply_udp( unsigned char *data, unsigned int mbox_len )
1318{
1319
1320 unsigned short len, udp_length, temp, ip_length;
1321 unsigned long ip_temp;
1322 int even_bound = 0;
1323 chdlc_udp_pkt_t *c_udp_pkt = (chdlc_udp_pkt_t *)data;
1324
1325 /* Set length of packet */
1326 len = sizeof(ip_pkt_t)+
1327 sizeof(udp_pkt_t)+
1328 sizeof(wp_mgmt_t)+
1329 sizeof(cblock_t)+
1330 sizeof(trace_info_t)+
1331 mbox_len;
1332
1333 /* fill in UDP reply */
1334 c_udp_pkt->wp_mgmt.request_reply = UDPMGMT_REPLY;
1335
1336 /* fill in UDP length */
1337 udp_length = sizeof(udp_pkt_t)+
1338 sizeof(wp_mgmt_t)+
1339 sizeof(cblock_t)+
1340 sizeof(trace_info_t)+
1341 mbox_len;
1342
1343 /* put it on an even boundary */
1344 if ( udp_length & 0x0001 ) {
1345 udp_length += 1;
1346 len += 1;
1347 even_bound = 1;
1348 }
1349
1350 temp = (udp_length<<8)|(udp_length>>8);
1351 c_udp_pkt->udp_pkt.udp_length = temp;
1352
1353 /* swap UDP ports */
1354 temp = c_udp_pkt->udp_pkt.udp_src_port;
1355 c_udp_pkt->udp_pkt.udp_src_port =
1356 c_udp_pkt->udp_pkt.udp_dst_port;
1357 c_udp_pkt->udp_pkt.udp_dst_port = temp;
1358
1359 /* add UDP pseudo header */
1360 temp = 0x1100;
1361 *((unsigned short *)(c_udp_pkt->data+mbox_len+even_bound)) = temp;
1362 temp = (udp_length<<8)|(udp_length>>8);
1363 *((unsigned short *)(c_udp_pkt->data+mbox_len+even_bound+2)) = temp;
1364
1365
1366 /* calculate UDP checksum */
1367 c_udp_pkt->udp_pkt.udp_checksum = 0;
1368 c_udp_pkt->udp_pkt.udp_checksum = calc_checksum(&data[UDP_OFFSET],udp_length+UDP_OFFSET);
1369
1370 /* fill in IP length */
1371 ip_length = len;
1372 temp = (ip_length<<8)|(ip_length>>8);
1373 c_udp_pkt->ip_pkt.total_length = temp;
1374
1375 /* swap IP addresses */
1376 ip_temp = c_udp_pkt->ip_pkt.ip_src_address;
1377 c_udp_pkt->ip_pkt.ip_src_address = c_udp_pkt->ip_pkt.ip_dst_address;
1378 c_udp_pkt->ip_pkt.ip_dst_address = ip_temp;
1379
1380 /* fill in IP checksum */
1381 c_udp_pkt->ip_pkt.hdr_checksum = 0;
1382 c_udp_pkt->ip_pkt.hdr_checksum = calc_checksum(data,sizeof(ip_pkt_t));
1383
1384 return len;
1385
1386} /* reply_udp */
1387
1388unsigned short calc_checksum (char *data, int len)
1389{
1390 unsigned short temp;
1391 unsigned long sum=0;
1392 int i;
1393
1394 for( i = 0; i <len; i+=2 ) {
1395 memcpy(&temp,&data[i],2);
1396 sum += (unsigned long)temp;
1397 }
1398
1399 while (sum >> 16 ) {
1400 sum = (sum & 0xffffUL) + (sum >> 16);
1401 }
1402
1403 temp = (unsigned short)sum;
1404 temp = ~temp;
1405
1406 if( temp == 0 )
1407 temp = 0xffff;
1408
1409 return temp;
1410}
1411
1412
1413/*============================================================================
1414 * Get ethernet-style interface statistics.
1415 * Return a pointer to struct enet_statistics.
1416 */
1417static struct net_device_stats* if_stats(struct net_device* dev)
1418{
1419 sdla_t *my_card;
1420 chdlc_private_area_t* chdlc_priv_area;
1421
1422 if ((chdlc_priv_area=dev->priv) == NULL)
1423 return NULL;
1424
1425 my_card = chdlc_priv_area->card;
1426 return &my_card->wandev.stats;
1427}
1428
1429
1430/****** Cisco HDLC Firmware Interface Functions *******************************/
1431
1432/*============================================================================
1433 * Read firmware code version.
1434 * Put code version as ASCII string in str.
1435 */
1436static int chdlc_read_version (sdla_t* card, char* str)
1437{
1438 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
1439 int len;
1440 char err;
1441 mb->buffer_length = 0;
1442 mb->command = READ_CHDLC_CODE_VERSION;
1443 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1444
1445 if(err != COMMAND_OK) {
1446 chdlc_error(card,err,mb);
1447 }
1448 else if (str) { /* is not null */
1449 len = mb->buffer_length;
1450 memcpy(str, mb->data, len);
1451 str[len] = '\0';
1452 }
1453 return (err);
1454}
1455
1456/*-----------------------------------------------------------------------------
1457 * Configure CHDLC firmware.
1458 */
1459static int chdlc_configure (sdla_t* card, void* data)
1460{
1461 int err;
1462 CHDLC_MAILBOX_STRUCT *mailbox = card->mbox;
1463 int data_length = sizeof(CHDLC_CONFIGURATION_STRUCT);
1464
1465 mailbox->buffer_length = data_length;
1466 memcpy(mailbox->data, data, data_length);
1467 mailbox->command = SET_CHDLC_CONFIGURATION;
1468 err = sdla_exec(mailbox) ? mailbox->return_code : CMD_TIMEOUT;
1469
1470 if (err != COMMAND_OK) chdlc_error (card, err, mailbox);
1471
1472 return err;
1473}
1474
1475
1476/*============================================================================
1477 * Set interrupt mode -- HDLC Version.
1478 */
1479
1480static int chdlc_set_intr_mode (sdla_t* card, unsigned mode)
1481{
1482 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
1483 CHDLC_INT_TRIGGERS_STRUCT* int_data =
1484 (CHDLC_INT_TRIGGERS_STRUCT *)mb->data;
1485 int err;
1486
1487 int_data->CHDLC_interrupt_triggers = mode;
1488 int_data->IRQ = card->hw.irq;
1489 int_data->interrupt_timer = 1;
1490
1491 mb->buffer_length = sizeof(CHDLC_INT_TRIGGERS_STRUCT);
1492 mb->command = SET_CHDLC_INTERRUPT_TRIGGERS;
1493 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1494 if (err != COMMAND_OK)
1495 chdlc_error (card, err, mb);
1496 return err;
1497}
1498
1499
1500/*===========================================================
1501 * chdlc_disable_comm_shutdown
1502 *
1503 * Shutdown() disables the communications. We must
1504 * have a sparate functions, because we must not
1505 * call chdlc_error() hander since the private
1506 * area has already been replaced */
1507
1508static int chdlc_disable_comm_shutdown (sdla_t *card)
1509{
1510 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
1511 CHDLC_INT_TRIGGERS_STRUCT* int_data =
1512 (CHDLC_INT_TRIGGERS_STRUCT *)mb->data;
1513 int err;
1514
1515 /* Disable Interrutps */
1516 int_data->CHDLC_interrupt_triggers = 0;
1517 int_data->IRQ = card->hw.irq;
1518 int_data->interrupt_timer = 1;
1519
1520 mb->buffer_length = sizeof(CHDLC_INT_TRIGGERS_STRUCT);
1521 mb->command = SET_CHDLC_INTERRUPT_TRIGGERS;
1522 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1523
1524 /* Disable Communications */
1525
1526 if (card->u.c.async_mode) {
1527 mb->command = DISABLE_ASY_COMMUNICATIONS;
1528 }else{
1529 mb->command = DISABLE_CHDLC_COMMUNICATIONS;
1530 }
1531
1532 mb->buffer_length = 0;
1533 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1534
1535 card->u.c.comm_enabled = 0;
1536
1537 return 0;
1538}
1539
1540/*============================================================================
1541 * Enable communications.
1542 */
1543
1544static int chdlc_comm_enable (sdla_t* card)
1545{
1546 int err;
1547 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
1548
1549 mb->buffer_length = 0;
1550 mb->command = ENABLE_CHDLC_COMMUNICATIONS;
1551 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1552 if (err != COMMAND_OK)
1553 chdlc_error(card, err, mb);
1554 else
1555 card->u.c.comm_enabled = 1;
1556
1557 return err;
1558}
1559
1560/*============================================================================
1561 * Read communication error statistics.
1562 */
1563static int chdlc_read_comm_err_stats (sdla_t* card)
1564{
1565 int err;
1566 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
1567
1568 mb->buffer_length = 0;
1569 mb->command = READ_COMMS_ERROR_STATS;
1570 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1571 if (err != COMMAND_OK)
1572 chdlc_error(card,err,mb);
1573 return err;
1574}
1575
1576
1577/*============================================================================
1578 * Read CHDLC operational statistics.
1579 */
1580static int chdlc_read_op_stats (sdla_t* card)
1581{
1582 int err;
1583 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
1584
1585 mb->buffer_length = 0;
1586 mb->command = READ_CHDLC_OPERATIONAL_STATS;
1587 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1588 if (err != COMMAND_OK)
1589 chdlc_error(card,err,mb);
1590 return err;
1591}
1592
1593
1594/*============================================================================
1595 * Update communications error and general packet statistics.
1596 */
1597static int update_comms_stats(sdla_t* card,
1598 chdlc_private_area_t* chdlc_priv_area)
1599{
1600 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
1601 COMMS_ERROR_STATS_STRUCT* err_stats;
1602 CHDLC_OPERATIONAL_STATS_STRUCT *op_stats;
1603
1604 /* on the first timer interrupt, read the comms error statistics */
1605 if(chdlc_priv_area->update_comms_stats == 2) {
1606 if(chdlc_read_comm_err_stats(card))
1607 return 1;
1608 err_stats = (COMMS_ERROR_STATS_STRUCT *)mb->data;
1609 card->wandev.stats.rx_over_errors =
1610 err_stats->Rx_overrun_err_count;
1611 card->wandev.stats.rx_crc_errors =
1612 err_stats->CRC_err_count;
1613 card->wandev.stats.rx_frame_errors =
1614 err_stats->Rx_abort_count;
1615 card->wandev.stats.rx_fifo_errors =
1616 err_stats->Rx_dis_pri_bfrs_full_count;
1617 card->wandev.stats.rx_missed_errors =
1618 card->wandev.stats.rx_fifo_errors;
1619 card->wandev.stats.tx_aborted_errors =
1620 err_stats->sec_Tx_abort_count;
1621 }
1622
1623 /* on the second timer interrupt, read the operational statistics */
1624 else {
1625 if(chdlc_read_op_stats(card))
1626 return 1;
1627 op_stats = (CHDLC_OPERATIONAL_STATS_STRUCT *)mb->data;
1628 card->wandev.stats.rx_length_errors =
1629 (op_stats->Rx_Data_discard_short_count +
1630 op_stats->Rx_Data_discard_long_count);
1631 }
1632
1633 return 0;
1634}
1635
1636/*============================================================================
1637 * Send packet.
1638 * Return: 0 - o.k.
1639 * 1 - no transmit buffers available
1640 */
1641static int chdlc_send (sdla_t* card, void* data, unsigned len)
1642{
1643 CHDLC_DATA_TX_STATUS_EL_STRUCT *txbuf = card->u.c.txbuf;
1644
1645 if (txbuf->opp_flag)
1646 return 1;
1647
1648 sdla_poke(&card->hw, txbuf->ptr_data_bfr, data, len);
1649
1650 txbuf->frame_length = len;
1651 txbuf->opp_flag = 1; /* start transmission */
1652
1653 /* Update transmit buffer control fields */
1654 card->u.c.txbuf = ++txbuf;
1655
1656 if ((void*)txbuf > card->u.c.txbuf_last)
1657 card->u.c.txbuf = card->u.c.txbuf_base;
1658
1659 return 0;
1660}
1661
1662/****** Firmware Error Handler **********************************************/
1663
1664/*============================================================================
1665 * Firmware error handler.
1666 * This routine is called whenever firmware command returns non-zero
1667 * return code.
1668 *
1669 * Return zero if previous command has to be cancelled.
1670 */
1671static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb)
1672{
1673 unsigned cmd = mb->command;
1674
1675 switch (err) {
1676
1677 case CMD_TIMEOUT:
1678 printk(KERN_INFO "%s: command 0x%02X timed out!\n",
1679 card->devname, cmd);
1680 break;
1681
1682 case S514_BOTH_PORTS_SAME_CLK_MODE:
1683 if(cmd == SET_CHDLC_CONFIGURATION) {
1684 printk(KERN_INFO
1685 "%s: Configure both ports for the same clock source\n",
1686 card->devname);
1687 break;
1688 }
1689
1690 default:
1691 printk(KERN_INFO "%s: command 0x%02X returned 0x%02X!\n",
1692 card->devname, cmd, err);
1693 }
1694
1695 return 0;
1696}
1697
1698
1699/********** Bottom Half Handlers ********************************************/
1700
1701/* NOTE: There is no API, BH support for Kernels lower than 2.2.X.
1702 * DO NOT INSERT ANY CODE HERE, NOTICE THE
1703 * PREPROCESSOR STATEMENT ABOVE, UNLESS YOU KNOW WHAT YOU ARE
1704 * DOING */
1705
1706static void chdlc_work(struct net_device * dev)
1707{
1708 chdlc_private_area_t* chan = dev->priv;
1709 sdla_t *card = chan->card;
1710 struct sk_buff *skb;
1711
1712 if (atomic_read(&chan->bh_buff_used) == 0){
1713 clear_bit(0, &chan->tq_working);
1714 return;
1715 }
1716
1717 while (atomic_read(&chan->bh_buff_used)){
1718
1719 skb = ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb;
1720
1721 if (skb != NULL){
1722
1723 if (chan->common.sk == NULL || chan->common.func == NULL){
1724 ++card->wandev.stats.rx_dropped;
1725 dev_kfree_skb_any(skb);
1726 chdlc_work_cleanup(dev);
1727 continue;
1728 }
1729
1730 if (chan->common.func(skb,dev,chan->common.sk) != 0){
1731 /* Sock full cannot send, queue us for another
1732 * try */
1733 atomic_set(&chan->common.receive_block,1);
1734 return;
1735 }else{
1736 chdlc_work_cleanup(dev);
1737 }
1738 }else{
1739 chdlc_work_cleanup(dev);
1740 }
1741 }
1742 clear_bit(0, &chan->tq_working);
1743
1744 return;
1745}
1746
1747static int chdlc_work_cleanup(struct net_device *dev)
1748{
1749 chdlc_private_area_t* chan = dev->priv;
1750
1751 ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb = NULL;
1752
1753 if (chan->bh_read == MAX_BH_BUFF){
1754 chan->bh_read=0;
1755 }else{
1756 ++chan->bh_read;
1757 }
1758
1759 atomic_dec(&chan->bh_buff_used);
1760 return 0;
1761}
1762
1763
1764
1765static int bh_enqueue(struct net_device *dev, struct sk_buff *skb)
1766{
1767 /* Check for full */
1768 chdlc_private_area_t* chan = dev->priv;
1769 sdla_t *card = chan->card;
1770
1771 if (atomic_read(&chan->bh_buff_used) == (MAX_BH_BUFF+1)){
1772 ++card->wandev.stats.rx_dropped;
1773 dev_kfree_skb_any(skb);
1774 return 1;
1775 }
1776
1777 ((bh_data_t *)&chan->bh_head[chan->bh_write])->skb = skb;
1778
1779 if (chan->bh_write == MAX_BH_BUFF){
1780 chan->bh_write=0;
1781 }else{
1782 ++chan->bh_write;
1783 }
1784
1785 atomic_inc(&chan->bh_buff_used);
1786
1787 return 0;
1788}
1789
1790/* END OF API BH Support */
1791
1792
1793/****** Interrupt Handlers **************************************************/
1794
1795/*============================================================================
1796 * Cisco HDLC interrupt service routine.
1797 */
1798static void wpc_isr (sdla_t* card)
1799{
1800 struct net_device* dev;
1801 SHARED_MEMORY_INFO_STRUCT* flags = NULL;
1802 int i;
1803 sdla_t *my_card;
1804
1805
1806 /* Check for which port the interrupt has been generated
1807 * Since Secondary Port is piggybacking on the Primary
1808 * the check must be done here.
1809 */
1810
1811 flags = card->u.c.flags;
1812 if (!flags->interrupt_info_struct.interrupt_type){
1813 /* Check for a second port (piggybacking) */
1814 if ((my_card = card->next)){
1815 flags = my_card->u.c.flags;
1816 if (flags->interrupt_info_struct.interrupt_type){
1817 card = my_card;
1818 card->isr(card);
1819 return;
1820 }
1821 }
1822 }
1823
1824 flags = card->u.c.flags;
1825 card->in_isr = 1;
1826 dev = card->wandev.dev;
1827
1828 /* If we get an interrupt with no network device, stop the interrupts
1829 * and issue an error */
1830 if (!card->tty_opt && !dev &&
1831 flags->interrupt_info_struct.interrupt_type !=
1832 COMMAND_COMPLETE_APP_INT_PEND){
1833
1834 goto isr_done;
1835 }
1836
1837 /* if critical due to peripheral operations
1838 * ie. update() or getstats() then reset the interrupt and
1839 * wait for the board to retrigger.
1840 */
1841 if(test_bit(PERI_CRIT, (void*)&card->wandev.critical)) {
1842 printk(KERN_INFO "ISR CRIT TO PERI\n");
1843 goto isr_done;
1844 }
1845
1846 /* On a 508 Card, if critical due to if_send
1847 * Major Error !!! */
1848 if(card->hw.type != SDLA_S514) {
1849 if(test_bit(SEND_CRIT, (void*)&card->wandev.critical)) {
1850 printk(KERN_INFO "%s: Critical while in ISR: %lx\n",
1851 card->devname, card->wandev.critical);
1852 card->in_isr = 0;
1853 flags->interrupt_info_struct.interrupt_type = 0;
1854 return;
1855 }
1856 }
1857
1858 switch(flags->interrupt_info_struct.interrupt_type) {
1859
1860 case RX_APP_INT_PEND: /* 0x01: receive interrupt */
1861 rx_intr(card);
1862 break;
1863
1864 case TX_APP_INT_PEND: /* 0x02: transmit interrupt */
1865 flags->interrupt_info_struct.interrupt_permission &=
1866 ~APP_INT_ON_TX_FRAME;
1867
1868 if (card->tty_opt){
1869 wanpipe_tty_trigger_poll(card);
1870 break;
1871 }
1872
1873 if (dev && netif_queue_stopped(dev)){
1874 if (card->u.c.usedby == API){
1875 netif_start_queue(dev);
1876 wakeup_sk_bh(dev);
1877 }else{
1878 netif_wake_queue(dev);
1879 }
1880 }
1881 break;
1882
1883 case COMMAND_COMPLETE_APP_INT_PEND:/* 0x04: cmd cplt */
1884 ++ Intr_test_counter;
1885 break;
1886
1887 case CHDLC_EXCEP_COND_APP_INT_PEND: /* 0x20 */
1888 process_chdlc_exception(card);
1889 break;
1890
1891 case GLOBAL_EXCEP_COND_APP_INT_PEND:
1892 process_global_exception(card);
1893 break;
1894
1895 case TIMER_APP_INT_PEND:
1896 timer_intr(card);
1897 break;
1898
1899 default:
1900 printk(KERN_INFO "%s: spurious interrupt 0x%02X!\n",
1901 card->devname,
1902 flags->interrupt_info_struct.interrupt_type);
1903 printk(KERN_INFO "Code name: ");
1904 for(i = 0; i < 4; i ++)
1905 printk(KERN_INFO "%c",
1906 flags->global_info_struct.codename[i]);
1907 printk(KERN_INFO "\nCode version: ");
1908 for(i = 0; i < 4; i ++)
1909 printk(KERN_INFO "%c",
1910 flags->global_info_struct.codeversion[i]);
1911 printk(KERN_INFO "\n");
1912 break;
1913 }
1914
1915isr_done:
1916
1917 card->in_isr = 0;
1918 flags->interrupt_info_struct.interrupt_type = 0;
1919 return;
1920}
1921
1922/*============================================================================
1923 * Receive interrupt handler.
1924 */
1925static void rx_intr (sdla_t* card)
1926{
1927 struct net_device *dev;
1928 chdlc_private_area_t *chdlc_priv_area;
1929 SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags;
1930 CHDLC_DATA_RX_STATUS_EL_STRUCT *rxbuf = card->u.c.rxmb;
1931 struct sk_buff *skb;
1932 unsigned len;
1933 unsigned addr = rxbuf->ptr_data_bfr;
1934 void *buf;
1935 int i,udp_type;
1936
1937 if (rxbuf->opp_flag != 0x01) {
1938 printk(KERN_INFO
1939 "%s: corrupted Rx buffer @ 0x%X, flag = 0x%02X!\n",
1940 card->devname, (unsigned)rxbuf, rxbuf->opp_flag);
1941 printk(KERN_INFO "Code name: ");
1942 for(i = 0; i < 4; i ++)
1943 printk(KERN_INFO "%c",
1944 flags->global_info_struct.codename[i]);
1945 printk(KERN_INFO "\nCode version: ");
1946 for(i = 0; i < 4; i ++)
1947 printk(KERN_INFO "%c",
1948 flags->global_info_struct.codeversion[i]);
1949 printk(KERN_INFO "\n");
1950
1951
1952 /* Bug Fix: Mar 6 2000
1953 * If we get a corrupted mailbox, it measn that driver
1954 * is out of sync with the firmware. There is no recovery.
1955 * If we don't turn off all interrupts for this card
1956 * the machine will crash.
1957 */
1958 printk(KERN_INFO "%s: Critical router failure ...!!!\n", card->devname);
1959 printk(KERN_INFO "Please contact Sangoma Technologies !\n");
1960 chdlc_set_intr_mode(card,0);
1961 return;
1962 }
1963
1964 len = rxbuf->frame_length;
1965
1966 if (card->tty_opt){
1967
1968 if (rxbuf->error_flag){
1969 goto rx_exit;
1970 }
1971
1972 if (len <= CRC_LENGTH){
1973 goto rx_exit;
1974 }
1975
1976 if (!card->u.c.async_mode){
1977 len -= CRC_LENGTH;
1978 }
1979
1980 wanpipe_tty_receive(card,addr,len);
1981 goto rx_exit;
1982 }
1983
1984 dev = card->wandev.dev;
1985
1986 if (!dev){
1987 goto rx_exit;
1988 }
1989
1990 if (!netif_running(dev))
1991 goto rx_exit;
1992
1993 chdlc_priv_area = dev->priv;
1994
1995
1996 /* Allocate socket buffer */
1997 skb = dev_alloc_skb(len);
1998
1999 if (skb == NULL) {
2000 printk(KERN_INFO "%s: no socket buffers available!\n",
2001 card->devname);
2002 ++card->wandev.stats.rx_dropped;
2003 goto rx_exit;
2004 }
2005
2006 /* Copy data to the socket buffer */
2007 if((addr + len) > card->u.c.rx_top + 1) {
2008 unsigned tmp = card->u.c.rx_top - addr + 1;
2009 buf = skb_put(skb, tmp);
2010 sdla_peek(&card->hw, addr, buf, tmp);
2011 addr = card->u.c.rx_base;
2012 len -= tmp;
2013 }
2014
2015 buf = skb_put(skb, len);
2016 sdla_peek(&card->hw, addr, buf, len);
2017
2018 skb->protocol = htons(ETH_P_IP);
2019
2020 card->wandev.stats.rx_packets ++;
2021 card->wandev.stats.rx_bytes += skb->len;
2022 udp_type = udp_pkt_type( skb, card );
2023
2024 if(udp_type == UDP_CPIPE_TYPE) {
2025 if(store_udp_mgmt_pkt(UDP_PKT_FRM_NETWORK,
2026 card, skb, dev, chdlc_priv_area)) {
2027 flags->interrupt_info_struct.
2028 interrupt_permission |=
2029 APP_INT_ON_TIMER;
2030 }
2031 } else if(card->u.c.usedby == API) {
2032
2033 api_rx_hdr_t* api_rx_hdr;
2034 skb_push(skb, sizeof(api_rx_hdr_t));
2035 api_rx_hdr = (api_rx_hdr_t*)&skb->data[0x00];
2036 api_rx_hdr->error_flag = rxbuf->error_flag;
2037 api_rx_hdr->time_stamp = rxbuf->time_stamp;
2038
2039 skb->protocol = htons(PVC_PROT);
2040 skb->mac.raw = skb->data;
2041 skb->dev = dev;
2042 skb->pkt_type = WAN_PACKET_DATA;
2043
2044 bh_enqueue(dev, skb);
2045
2046 if (!test_and_set_bit(0,&chdlc_priv_area->tq_working))
2047 wanpipe_queue_work(&chdlc_priv_area->common.wanpipe_work);
2048 }else{
2049 /* FIXME: we should check to see if the received packet is a
2050 multicast packet so that we can increment the multicast
2051 statistic
2052 ++ chdlc_priv_area->if_stats.multicast;
2053 */
2054 /* Pass it up the protocol stack */
2055
2056 skb->dev = dev;
2057 skb->mac.raw = skb->data;
2058 netif_rx(skb);
2059 dev->last_rx = jiffies;
2060 }
2061
2062rx_exit:
2063 /* Release buffer element and calculate a pointer to the next one */
2064 rxbuf->opp_flag = 0x00;
2065 card->u.c.rxmb = ++ rxbuf;
2066 if((void*)rxbuf > card->u.c.rxbuf_last){
2067 card->u.c.rxmb = card->u.c.rxbuf_base;
2068 }
2069}
2070
2071/*============================================================================
2072 * Timer interrupt handler.
2073 * The timer interrupt is used for two purposes:
2074 * 1) Processing udp calls from 'cpipemon'.
2075 * 2) Reading board-level statistics for updating the proc file system.
2076 */
2077void timer_intr(sdla_t *card)
2078{
2079 struct net_device* dev;
2080 chdlc_private_area_t* chdlc_priv_area = NULL;
2081 SHARED_MEMORY_INFO_STRUCT* flags = NULL;
2082
2083 if ((dev = card->wandev.dev)==NULL){
2084 flags = card->u.c.flags;
2085 flags->interrupt_info_struct.interrupt_permission &=
2086 ~APP_INT_ON_TIMER;
2087 return;
2088 }
2089
2090 chdlc_priv_area = dev->priv;
2091
2092 if (chdlc_priv_area->timer_int_enabled & TMR_INT_ENABLED_CONFIG) {
2093 if (!config_chdlc(card)){
2094 chdlc_priv_area->timer_int_enabled &= ~TMR_INT_ENABLED_CONFIG;
2095 }
2096 }
2097
2098 /* process a udp call if pending */
2099 if(chdlc_priv_area->timer_int_enabled & TMR_INT_ENABLED_UDP) {
2100 process_udp_mgmt_pkt(card, dev,
2101 chdlc_priv_area);
2102 chdlc_priv_area->timer_int_enabled &= ~TMR_INT_ENABLED_UDP;
2103 }
2104
2105 /* read the communications statistics if required */
2106 if(chdlc_priv_area->timer_int_enabled & TMR_INT_ENABLED_UPDATE) {
2107 update_comms_stats(card, chdlc_priv_area);
2108 if(!(-- chdlc_priv_area->update_comms_stats)) {
2109 chdlc_priv_area->timer_int_enabled &=
2110 ~TMR_INT_ENABLED_UPDATE;
2111 }
2112 }
2113
2114 /* only disable the timer interrupt if there are no udp or statistic */
2115 /* updates pending */
2116 if(!chdlc_priv_area->timer_int_enabled) {
2117 flags = card->u.c.flags;
2118 flags->interrupt_info_struct.interrupt_permission &=
2119 ~APP_INT_ON_TIMER;
2120 }
2121}
2122
2123/*------------------------------------------------------------------------------
2124 Miscellaneous Functions
2125 - set_chdlc_config() used to set configuration options on the board
2126------------------------------------------------------------------------------*/
2127
2128static int set_chdlc_config(sdla_t* card)
2129{
2130 CHDLC_CONFIGURATION_STRUCT cfg;
2131
2132 memset(&cfg, 0, sizeof(CHDLC_CONFIGURATION_STRUCT));
2133
2134 if(card->wandev.clocking){
2135 cfg.baud_rate = card->wandev.bps;
2136 }
2137
2138 cfg.line_config_options = (card->wandev.interface == WANOPT_RS232) ?
2139 INTERFACE_LEVEL_RS232 : INTERFACE_LEVEL_V35;
2140
2141 cfg.modem_config_options = 0;
2142 cfg.modem_status_timer = 100;
2143
2144 cfg.CHDLC_protocol_options = card->u.c.protocol_options;
2145
2146 if (card->tty_opt){
2147 cfg.CHDLC_API_options = DISCARD_RX_ERROR_FRAMES;
2148 }
2149
2150 cfg.percent_data_buffer_for_Tx = (card->u.c.receive_only) ? 0 : 50;
2151 cfg.CHDLC_statistics_options = (CHDLC_TX_DATA_BYTE_COUNT_STAT |
2152 CHDLC_RX_DATA_BYTE_COUNT_STAT);
2153
2154 if (card->tty_opt){
2155 card->wandev.mtu = TTY_CHDLC_MAX_MTU;
2156 }
2157 cfg.max_CHDLC_data_field_length = card->wandev.mtu;
2158 cfg.transmit_keepalive_timer = card->u.c.kpalv_tx;
2159 cfg.receive_keepalive_timer = card->u.c.kpalv_rx;
2160 cfg.keepalive_error_tolerance = card->u.c.kpalv_err;
2161 cfg.SLARP_request_timer = card->u.c.slarp_timer;
2162
2163 if (cfg.SLARP_request_timer) {
2164 cfg.IP_address = 0;
2165 cfg.IP_netmask = 0;
2166
2167 }else if (card->wandev.dev){
2168 struct net_device *dev = card->wandev.dev;
2169 chdlc_private_area_t *chdlc_priv_area = dev->priv;
2170
2171 struct in_device *in_dev = dev->ip_ptr;
2172
2173 if(in_dev != NULL) {
2174 struct in_ifaddr *ifa = in_dev->ifa_list;
2175
2176 if (ifa != NULL ) {
2177 cfg.IP_address = ntohl(ifa->ifa_local);
2178 cfg.IP_netmask = ntohl(ifa->ifa_mask);
2179 chdlc_priv_area->IP_address = ntohl(ifa->ifa_local);
2180 chdlc_priv_area->IP_netmask = ntohl(ifa->ifa_mask);
2181 }
2182 }
2183
2184 /* FIXME: We must re-think this message in next release
2185 if((cfg.IP_address & 0x000000FF) > 2) {
2186 printk(KERN_WARNING "\n");
2187 printk(KERN_WARNING " WARNING:%s configured with an\n",
2188 card->devname);
2189 printk(KERN_WARNING " invalid local IP address.\n");
2190 printk(KERN_WARNING " Slarp pragmatics will fail.\n");
2191 printk(KERN_WARNING " IP address should be of the\n");
2192 printk(KERN_WARNING " format A.B.C.1 or A.B.C.2.\n");
2193 }
2194 */
2195 }
2196
2197 return chdlc_configure(card, &cfg);
2198}
2199
2200
2201/*-----------------------------------------------------------------------------
2202 set_asy_config() used to set asynchronous configuration options on the board
2203------------------------------------------------------------------------------*/
2204
2205static int set_asy_config(sdla_t* card)
2206{
2207
2208 ASY_CONFIGURATION_STRUCT cfg;
2209 CHDLC_MAILBOX_STRUCT *mailbox = card->mbox;
2210 int err;
2211
2212 memset(&cfg, 0, sizeof(ASY_CONFIGURATION_STRUCT));
2213
2214 if(card->wandev.clocking)
2215 cfg.baud_rate = card->wandev.bps;
2216
2217 cfg.line_config_options = (card->wandev.interface == WANOPT_RS232) ?
2218 INTERFACE_LEVEL_RS232 : INTERFACE_LEVEL_V35;
2219
2220 cfg.modem_config_options = 0;
2221 cfg.asy_API_options = card->u.c.api_options;
2222 cfg.asy_protocol_options = card->u.c.protocol_options;
2223 cfg.Tx_bits_per_char = card->u.c.tx_bits_per_char;
2224 cfg.Rx_bits_per_char = card->u.c.rx_bits_per_char;
2225 cfg.stop_bits = card->u.c.stop_bits;
2226 cfg.parity = card->u.c.parity;
2227 cfg.break_timer = card->u.c.break_timer;
2228 cfg.asy_Rx_inter_char_timer = card->u.c.inter_char_timer;
2229 cfg.asy_Rx_complete_length = card->u.c.rx_complete_length;
2230 cfg.XON_char = card->u.c.xon_char;
2231 cfg.XOFF_char = card->u.c.xoff_char;
2232 cfg.asy_statistics_options = (CHDLC_TX_DATA_BYTE_COUNT_STAT |
2233 CHDLC_RX_DATA_BYTE_COUNT_STAT);
2234
2235 mailbox->buffer_length = sizeof(ASY_CONFIGURATION_STRUCT);
2236 memcpy(mailbox->data, &cfg, mailbox->buffer_length);
2237 mailbox->command = SET_ASY_CONFIGURATION;
2238 err = sdla_exec(mailbox) ? mailbox->return_code : CMD_TIMEOUT;
2239 if (err != COMMAND_OK)
2240 chdlc_error (card, err, mailbox);
2241 return err;
2242}
2243
2244/*============================================================================
2245 * Enable asynchronous communications.
2246 */
2247
2248static int asy_comm_enable (sdla_t* card)
2249{
2250
2251 int err;
2252 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
2253
2254 mb->buffer_length = 0;
2255 mb->command = ENABLE_ASY_COMMUNICATIONS;
2256 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
2257 if (err != COMMAND_OK && card->wandev.dev)
2258 chdlc_error(card, err, mb);
2259
2260 if (!err)
2261 card->u.c.comm_enabled = 1;
2262
2263 return err;
2264}
2265
2266/*============================================================================
2267 * Process global exception condition
2268 */
2269static int process_global_exception(sdla_t *card)
2270{
2271 CHDLC_MAILBOX_STRUCT* mbox = card->mbox;
2272 int err;
2273
2274 mbox->buffer_length = 0;
2275 mbox->command = READ_GLOBAL_EXCEPTION_CONDITION;
2276 err = sdla_exec(mbox) ? mbox->return_code : CMD_TIMEOUT;
2277
2278 if(err != CMD_TIMEOUT ){
2279
2280 switch(mbox->return_code) {
2281
2282 case EXCEP_MODEM_STATUS_CHANGE:
2283
2284 printk(KERN_INFO "%s: Modem status change\n",
2285 card->devname);
2286
2287 switch(mbox->data[0] & (DCD_HIGH | CTS_HIGH)) {
2288 case (DCD_HIGH):
2289 printk(KERN_INFO "%s: DCD high, CTS low\n",card->devname);
2290 break;
2291 case (CTS_HIGH):
2292 printk(KERN_INFO "%s: DCD low, CTS high\n",card->devname);
2293 break;
2294 case ((DCD_HIGH | CTS_HIGH)):
2295 printk(KERN_INFO "%s: DCD high, CTS high\n",card->devname);
2296 break;
2297 default:
2298 printk(KERN_INFO "%s: DCD low, CTS low\n",card->devname);
2299 break;
2300 }
2301 break;
2302
2303 case EXCEP_TRC_DISABLED:
2304 printk(KERN_INFO "%s: Line trace disabled\n",
2305 card->devname);
2306 break;
2307
2308 case EXCEP_IRQ_TIMEOUT:
2309 printk(KERN_INFO "%s: IRQ timeout occurred\n",
2310 card->devname);
2311 break;
2312
2313 case 0x17:
2314 if (card->tty_opt){
2315 if (card->tty && card->tty_open){
2316 printk(KERN_INFO
2317 "%s: Modem Hangup Exception: Hanging Up!\n",
2318 card->devname);
2319 tty_hangup(card->tty);
2320 }
2321 break;
2322 }
2323
2324 /* If TTY is not used just drop throught */
2325
2326 default:
2327 printk(KERN_INFO "%s: Global exception %x\n",
2328 card->devname, mbox->return_code);
2329 break;
2330 }
2331 }
2332 return 0;
2333}
2334
2335
2336/*============================================================================
2337 * Process chdlc exception condition
2338 */
2339static int process_chdlc_exception(sdla_t *card)
2340{
2341 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
2342 int err;
2343
2344 mb->buffer_length = 0;
2345 mb->command = READ_CHDLC_EXCEPTION_CONDITION;
2346 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
2347 if(err != CMD_TIMEOUT) {
2348
2349 switch (err) {
2350
2351 case EXCEP_LINK_ACTIVE:
2352 port_set_state(card, WAN_CONNECTED);
2353 trigger_chdlc_poll(card->wandev.dev);
2354 break;
2355
2356 case EXCEP_LINK_INACTIVE_MODEM:
2357 port_set_state(card, WAN_DISCONNECTED);
2358 unconfigure_ip(card);
2359 trigger_chdlc_poll(card->wandev.dev);
2360 break;
2361
2362 case EXCEP_LINK_INACTIVE_KPALV:
2363 port_set_state(card, WAN_DISCONNECTED);
2364 printk(KERN_INFO "%s: Keepalive timer expired.\n",
2365 card->devname);
2366 unconfigure_ip(card);
2367 trigger_chdlc_poll(card->wandev.dev);
2368 break;
2369
2370 case EXCEP_IP_ADDRESS_DISCOVERED:
2371 if (configure_ip(card))
2372 return -1;
2373 break;
2374
2375 case EXCEP_LOOPBACK_CONDITION:
2376 printk(KERN_INFO "%s: Loopback Condition Detected.\n",
2377 card->devname);
2378 break;
2379
2380 case NO_CHDLC_EXCEP_COND_TO_REPORT:
2381 printk(KERN_INFO "%s: No exceptions reported.\n",
2382 card->devname);
2383 break;
2384 }
2385
2386 }
2387 return 0;
2388}
2389
2390
2391/*============================================================================
2392 * Configure IP from SLARP negotiation
2393 * This adds dynamic routes when SLARP has provided valid addresses
2394 */
2395
2396static int configure_ip (sdla_t* card)
2397{
2398 struct net_device *dev = card->wandev.dev;
2399 chdlc_private_area_t *chdlc_priv_area;
2400 char err;
2401
2402 if (!dev)
2403 return 0;
2404
2405 chdlc_priv_area = dev->priv;
2406
2407
2408 /* set to discover */
2409 if(card->u.c.slarp_timer != 0x00) {
2410 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
2411 CHDLC_CONFIGURATION_STRUCT *cfg;
2412
2413 mb->buffer_length = 0;
2414 mb->command = READ_CHDLC_CONFIGURATION;
2415 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
2416
2417 if(err != COMMAND_OK) {
2418 chdlc_error(card,err,mb);
2419 return -1;
2420 }
2421
2422 cfg = (CHDLC_CONFIGURATION_STRUCT *)mb->data;
2423 chdlc_priv_area->IP_address = cfg->IP_address;
2424 chdlc_priv_area->IP_netmask = cfg->IP_netmask;
2425
2426 /* Set flag to add route */
2427 chdlc_priv_area->route_status = ADD_ROUTE;
2428
2429 /* The idea here is to add the route in the poll routine.
2430 This way, we aren't in interrupt context when adding routes */
2431 trigger_chdlc_poll(dev);
2432 }
2433
2434 return 0;
2435}
2436
2437
2438/*============================================================================
2439 * Un-Configure IP negotiated by SLARP
2440 * This removes dynamic routes when the link becomes inactive.
2441 */
2442
2443static int unconfigure_ip (sdla_t* card)
2444{
2445 struct net_device *dev = card->wandev.dev;
2446 chdlc_private_area_t *chdlc_priv_area;
2447
2448 if (!dev)
2449 return 0;
2450
2451 chdlc_priv_area= dev->priv;
2452
2453 if (chdlc_priv_area->route_status == ROUTE_ADDED) {
2454
2455 /* Note: If this function is called, the
2456 * port state has been DISCONNECTED. This state
2457 * change will trigger a poll_disconnected
2458 * function, that will check for this condition.
2459 */
2460 chdlc_priv_area->route_status = REMOVE_ROUTE;
2461
2462 }
2463 return 0;
2464}
2465
2466/*============================================================================
2467 * Routine to add/remove routes
2468 * Called like a polling routine when Routes are flagged to be added/removed.
2469 */
2470
2471static void process_route (sdla_t *card)
2472{
2473 struct net_device *dev = card->wandev.dev;
2474 unsigned char port_num;
2475 chdlc_private_area_t *chdlc_priv_area = NULL;
2476 u32 local_IP_addr = 0;
2477 u32 remote_IP_addr = 0;
2478 u32 IP_netmask, IP_addr;
2479 int err = 0;
2480 struct in_device *in_dev;
2481 mm_segment_t fs;
2482 struct ifreq if_info;
2483 struct sockaddr_in *if_data1, *if_data2;
2484
2485 chdlc_priv_area = dev->priv;
2486 port_num = card->u.c.comm_port;
2487
2488 /* Bug Fix Mar 16 2000
2489 * AND the IP address to the Mask before checking
2490 * the last two bits. */
2491
2492 if((chdlc_priv_area->route_status == ADD_ROUTE) &&
2493 ((chdlc_priv_area->IP_address & ~chdlc_priv_area->IP_netmask) > 2)) {
2494
2495 printk(KERN_INFO "%s: Dynamic route failure.\n",card->devname);
2496
2497 if(card->u.c.slarp_timer) {
2498 u32 addr_net = htonl(chdlc_priv_area->IP_address);
2499
2500 printk(KERN_INFO "%s: Bad IP address %u.%u.%u.%u received\n",
2501 card->devname,
2502 NIPQUAD(addr_net));
2503 printk(KERN_INFO "%s: from remote station.\n",
2504 card->devname);
2505
2506 }else{
2507 u32 addr_net = htonl(chdlc_priv_area->IP_address);
2508
2509 printk(KERN_INFO "%s: Bad IP address %u.%u.%u.%u issued\n",
2510 card->devname,
2511 NIPQUAD(addr_net));
2512 printk(KERN_INFO "%s: to remote station. Local\n",
2513 card->devname);
2514 printk(KERN_INFO "%s: IP address must be A.B.C.1\n",
2515 card->devname);
2516 printk(KERN_INFO "%s: or A.B.C.2.\n",card->devname);
2517 }
2518
2519 /* remove the route due to the IP address error condition */
2520 chdlc_priv_area->route_status = REMOVE_ROUTE;
2521 err = 1;
2522 }
2523
2524 /* If we are removing a route with bad IP addressing, then use the */
2525 /* locally configured IP addresses */
2526 if((chdlc_priv_area->route_status == REMOVE_ROUTE) && err) {
2527
2528 /* do not remove a bad route that has already been removed */
2529 if(chdlc_priv_area->route_removed) {
2530 return;
2531 }
2532
2533 in_dev = dev->ip_ptr;
2534
2535 if(in_dev != NULL) {
2536 struct in_ifaddr *ifa = in_dev->ifa_list;
2537 if (ifa != NULL ) {
2538 local_IP_addr = ifa->ifa_local;
2539 IP_netmask = ifa->ifa_mask;
2540 }
2541 }
2542 }else{
2543 /* According to Cisco HDLC, if the point-to-point address is
2544 A.B.C.1, then we are the opposite (A.B.C.2), and vice-versa.
2545 */
2546 IP_netmask = ntohl(chdlc_priv_area->IP_netmask);
2547 remote_IP_addr = ntohl(chdlc_priv_area->IP_address);
2548
2549
2550 /* If Netmask is 255.255.255.255 the local address
2551 * calculation will fail. Default it back to 255.255.255.0 */
2552 if (IP_netmask == 0xffffffff)
2553 IP_netmask &= 0x00ffffff;
2554
2555 /* Bug Fix Mar 16 2000
2556 * AND the Remote IP address with IP netmask, instead
2557 * of static netmask of 255.255.255.0 */
2558 local_IP_addr = (remote_IP_addr & IP_netmask) +
2559 (~remote_IP_addr & ntohl(0x0003));
2560
2561 if(!card->u.c.slarp_timer) {
2562 IP_addr = local_IP_addr;
2563 local_IP_addr = remote_IP_addr;
2564 remote_IP_addr = IP_addr;
2565 }
2566 }
2567
2568 fs = get_fs(); /* Save file system */
2569 set_fs(get_ds()); /* Get user space block */
2570
2571 /* Setup a structure for adding/removing routes */
2572 memset(&if_info, 0, sizeof(if_info));
2573 strcpy(if_info.ifr_name, dev->name);
2574
2575 switch (chdlc_priv_area->route_status) {
2576
2577 case ADD_ROUTE:
2578
2579 if(!card->u.c.slarp_timer) {
2580 if_data2 = (struct sockaddr_in *)&if_info.ifr_dstaddr;
2581 if_data2->sin_addr.s_addr = remote_IP_addr;
2582 if_data2->sin_family = AF_INET;
2583 err = devinet_ioctl(SIOCSIFDSTADDR, &if_info);
2584 } else {
2585 if_data1 = (struct sockaddr_in *)&if_info.ifr_addr;
2586 if_data1->sin_addr.s_addr = local_IP_addr;
2587 if_data1->sin_family = AF_INET;
2588 if(!(err = devinet_ioctl(SIOCSIFADDR, &if_info))){
2589 if_data2 = (struct sockaddr_in *)&if_info.ifr_dstaddr;
2590 if_data2->sin_addr.s_addr = remote_IP_addr;
2591 if_data2->sin_family = AF_INET;
2592 err = devinet_ioctl(SIOCSIFDSTADDR, &if_info);
2593 }
2594 }
2595
2596 if(err) {
2597 printk(KERN_INFO "%s: Add route %u.%u.%u.%u failed (%d)\n",
2598 card->devname, NIPQUAD(remote_IP_addr), err);
2599 } else {
2600 ((chdlc_private_area_t *)dev->priv)->route_status = ROUTE_ADDED;
2601 printk(KERN_INFO "%s: Dynamic route added.\n",
2602 card->devname);
2603 printk(KERN_INFO "%s: Local IP addr : %u.%u.%u.%u\n",
2604 card->devname, NIPQUAD(local_IP_addr));
2605 printk(KERN_INFO "%s: Remote IP addr: %u.%u.%u.%u\n",
2606 card->devname, NIPQUAD(remote_IP_addr));
2607 chdlc_priv_area->route_removed = 0;
2608 }
2609 break;
2610
2611
2612 case REMOVE_ROUTE:
2613
2614 /* Change the local ip address of the interface to 0.
2615 * This will also delete the destination route.
2616 */
2617 if(!card->u.c.slarp_timer) {
2618 if_data2 = (struct sockaddr_in *)&if_info.ifr_dstaddr;
2619 if_data2->sin_addr.s_addr = 0;
2620 if_data2->sin_family = AF_INET;
2621 err = devinet_ioctl(SIOCSIFDSTADDR, &if_info);
2622 } else {
2623 if_data1 = (struct sockaddr_in *)&if_info.ifr_addr;
2624 if_data1->sin_addr.s_addr = 0;
2625 if_data1->sin_family = AF_INET;
2626 err = devinet_ioctl(SIOCSIFADDR,&if_info);
2627
2628 }
2629 if(err) {
2630 printk(KERN_INFO
2631 "%s: Remove route %u.%u.%u.%u failed, (err %d)\n",
2632 card->devname, NIPQUAD(remote_IP_addr),
2633 err);
2634 } else {
2635 ((chdlc_private_area_t *)dev->priv)->route_status =
2636 NO_ROUTE;
2637 printk(KERN_INFO "%s: Dynamic route removed: %u.%u.%u.%u\n",
2638 card->devname, NIPQUAD(local_IP_addr));
2639 chdlc_priv_area->route_removed = 1;
2640 }
2641 break;
2642 }
2643
2644 set_fs(fs); /* Restore file system */
2645
2646}
2647
2648
2649/*=============================================================================
2650 * Store a UDP management packet for later processing.
2651 */
2652
2653static int store_udp_mgmt_pkt(char udp_pkt_src, sdla_t* card,
2654 struct sk_buff *skb, struct net_device* dev,
2655 chdlc_private_area_t* chdlc_priv_area)
2656{
2657 int udp_pkt_stored = 0;
2658
2659 if(!chdlc_priv_area->udp_pkt_lgth &&
2660 (skb->len <= MAX_LGTH_UDP_MGNT_PKT)) {
2661 chdlc_priv_area->udp_pkt_lgth = skb->len;
2662 chdlc_priv_area->udp_pkt_src = udp_pkt_src;
2663 memcpy(chdlc_priv_area->udp_pkt_data, skb->data, skb->len);
2664 chdlc_priv_area->timer_int_enabled = TMR_INT_ENABLED_UDP;
2665 udp_pkt_stored = 1;
2666 }
2667
2668 if(udp_pkt_src == UDP_PKT_FRM_STACK){
2669 dev_kfree_skb_any(skb);
2670 }else{
2671 dev_kfree_skb_any(skb);
2672 }
2673
2674 return(udp_pkt_stored);
2675}
2676
2677
2678/*=============================================================================
2679 * Process UDP management packet.
2680 */
2681
2682static int process_udp_mgmt_pkt(sdla_t* card, struct net_device* dev,
2683 chdlc_private_area_t* chdlc_priv_area )
2684{
2685 unsigned char *buf;
2686 unsigned int frames, len;
2687 struct sk_buff *new_skb;
2688 unsigned short buffer_length, real_len;
2689 unsigned long data_ptr;
2690 unsigned data_length;
2691 int udp_mgmt_req_valid = 1;
2692 CHDLC_MAILBOX_STRUCT *mb = card->mbox;
2693 SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags;
2694 chdlc_udp_pkt_t *chdlc_udp_pkt;
2695 struct timeval tv;
2696 int err;
2697 char ut_char;
2698
2699 chdlc_udp_pkt = (chdlc_udp_pkt_t *) chdlc_priv_area->udp_pkt_data;
2700
2701 if(chdlc_priv_area->udp_pkt_src == UDP_PKT_FRM_NETWORK){
2702
2703 /* Only these commands are support for remote debugging.
2704 * All others are not */
2705 switch(chdlc_udp_pkt->cblock.command) {
2706
2707 case READ_GLOBAL_STATISTICS:
2708 case READ_MODEM_STATUS:
2709 case READ_CHDLC_LINK_STATUS:
2710 case CPIPE_ROUTER_UP_TIME:
2711 case READ_COMMS_ERROR_STATS:
2712 case READ_CHDLC_OPERATIONAL_STATS:
2713
2714 /* These two commands are executed for
2715 * each request */
2716 case READ_CHDLC_CONFIGURATION:
2717 case READ_CHDLC_CODE_VERSION:
2718 udp_mgmt_req_valid = 1;
2719 break;
2720 default:
2721 udp_mgmt_req_valid = 0;
2722 break;
2723 }
2724 }
2725
2726 if(!udp_mgmt_req_valid) {
2727
2728 /* set length to 0 */
2729 chdlc_udp_pkt->cblock.buffer_length = 0;
2730
2731 /* set return code */
2732 chdlc_udp_pkt->cblock.return_code = 0xCD;
2733
2734 if (net_ratelimit()){
2735 printk(KERN_INFO
2736 "%s: Warning, Illegal UDP command attempted from network: %x\n",
2737 card->devname,chdlc_udp_pkt->cblock.command);
2738 }
2739
2740 } else {
2741 unsigned long trace_status_cfg_addr = 0;
2742 TRACE_STATUS_EL_CFG_STRUCT trace_cfg_struct;
2743 TRACE_STATUS_ELEMENT_STRUCT trace_element_struct;
2744
2745 switch(chdlc_udp_pkt->cblock.command) {
2746
2747 case CPIPE_ENABLE_TRACING:
2748 if (!chdlc_priv_area->TracingEnabled) {
2749
2750 /* OPERATE_DATALINE_MONITOR */
2751
2752 mb->buffer_length = sizeof(LINE_TRACE_CONFIG_STRUCT);
2753 mb->command = SET_TRACE_CONFIGURATION;
2754
2755 ((LINE_TRACE_CONFIG_STRUCT *)mb->data)->
2756 trace_config = TRACE_ACTIVE;
2757 /* Trace delay mode is not used because it slows
2758 down transfer and results in a standoff situation
2759 when there is a lot of data */
2760
2761 /* Configure the Trace based on user inputs */
2762 ((LINE_TRACE_CONFIG_STRUCT *)mb->data)->trace_config |=
2763 chdlc_udp_pkt->data[0];
2764
2765 ((LINE_TRACE_CONFIG_STRUCT *)mb->data)->
2766 trace_deactivation_timer = 4000;
2767
2768
2769 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
2770 if (err != COMMAND_OK) {
2771 chdlc_error(card,err,mb);
2772 card->TracingEnabled = 0;
2773 chdlc_udp_pkt->cblock.return_code = err;
2774 mb->buffer_length = 0;
2775 break;
2776 }
2777
2778 /* Get the base address of the trace element list */
2779 mb->buffer_length = 0;
2780 mb->command = READ_TRACE_CONFIGURATION;
2781 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
2782
2783 if (err != COMMAND_OK) {
2784 chdlc_error(card,err,mb);
2785 chdlc_priv_area->TracingEnabled = 0;
2786 chdlc_udp_pkt->cblock.return_code = err;
2787 mb->buffer_length = 0;
2788 break;
2789 }
2790
2791 trace_status_cfg_addr =((LINE_TRACE_CONFIG_STRUCT *)
2792 mb->data) -> ptr_trace_stat_el_cfg_struct;
2793
2794 sdla_peek(&card->hw, trace_status_cfg_addr,
2795 &trace_cfg_struct, sizeof(trace_cfg_struct));
2796
2797 chdlc_priv_area->start_trace_addr = trace_cfg_struct.
2798 base_addr_trace_status_elements;
2799
2800 chdlc_priv_area->number_trace_elements =
2801 trace_cfg_struct.number_trace_status_elements;
2802
2803 chdlc_priv_area->end_trace_addr = (unsigned long)
2804 ((TRACE_STATUS_ELEMENT_STRUCT *)
2805 chdlc_priv_area->start_trace_addr +
2806 (chdlc_priv_area->number_trace_elements - 1));
2807
2808 chdlc_priv_area->base_addr_trace_buffer =
2809 trace_cfg_struct.base_addr_trace_buffer;
2810
2811 chdlc_priv_area->end_addr_trace_buffer =
2812 trace_cfg_struct.end_addr_trace_buffer;
2813
2814 chdlc_priv_area->curr_trace_addr =
2815 trace_cfg_struct.next_trace_element_to_use;
2816
2817 chdlc_priv_area->available_buffer_space = 2000 -
2818 sizeof(ip_pkt_t) -
2819 sizeof(udp_pkt_t) -
2820 sizeof(wp_mgmt_t) -
2821 sizeof(cblock_t) -
2822 sizeof(trace_info_t);
2823 }
2824 chdlc_udp_pkt->cblock.return_code = COMMAND_OK;
2825 mb->buffer_length = 0;
2826 chdlc_priv_area->TracingEnabled = 1;
2827 break;
2828
2829
2830 case CPIPE_DISABLE_TRACING:
2831 if (chdlc_priv_area->TracingEnabled) {
2832
2833 /* OPERATE_DATALINE_MONITOR */
2834 mb->buffer_length = sizeof(LINE_TRACE_CONFIG_STRUCT);
2835 mb->command = SET_TRACE_CONFIGURATION;
2836 ((LINE_TRACE_CONFIG_STRUCT *)mb->data)->
2837 trace_config = TRACE_INACTIVE;
2838 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
2839 }
2840
2841 chdlc_priv_area->TracingEnabled = 0;
2842 chdlc_udp_pkt->cblock.return_code = COMMAND_OK;
2843 mb->buffer_length = 0;
2844 break;
2845
2846
2847 case CPIPE_GET_TRACE_INFO:
2848
2849 if (!chdlc_priv_area->TracingEnabled) {
2850 chdlc_udp_pkt->cblock.return_code = 1;
2851 mb->buffer_length = 0;
2852 break;
2853 }
2854
2855 chdlc_udp_pkt->trace_info.ismoredata = 0x00;
2856 buffer_length = 0; /* offset of packet already occupied */
2857
2858 for (frames=0; frames < chdlc_priv_area->number_trace_elements; frames++){
2859
2860 trace_pkt_t *trace_pkt = (trace_pkt_t *)
2861 &chdlc_udp_pkt->data[buffer_length];
2862
2863 sdla_peek(&card->hw, chdlc_priv_area->curr_trace_addr,
2864 (unsigned char *)&trace_element_struct,
2865 sizeof(TRACE_STATUS_ELEMENT_STRUCT));
2866
2867 if (trace_element_struct.opp_flag == 0x00) {
2868 break;
2869 }
2870
2871 /* get pointer to real data */
2872 data_ptr = trace_element_struct.ptr_data_bfr;
2873
2874 /* See if there is actual data on the trace buffer */
2875 if (data_ptr){
2876 data_length = trace_element_struct.trace_length;
2877 }else{
2878 data_length = 0;
2879 chdlc_udp_pkt->trace_info.ismoredata = 0x01;
2880 }
2881
2882 if( (chdlc_priv_area->available_buffer_space - buffer_length)
2883 < ( sizeof(trace_pkt_t) + data_length) ) {
2884
2885 /* indicate there are more frames on board & exit */
2886 chdlc_udp_pkt->trace_info.ismoredata = 0x01;
2887 break;
2888 }
2889
2890 trace_pkt->status = trace_element_struct.trace_type;
2891
2892 trace_pkt->time_stamp =
2893 trace_element_struct.trace_time_stamp;
2894
2895 trace_pkt->real_length =
2896 trace_element_struct.trace_length;
2897
2898 /* see if we can fit the frame into the user buffer */
2899 real_len = trace_pkt->real_length;
2900
2901 if (data_ptr == 0) {
2902 trace_pkt->data_avail = 0x00;
2903 } else {
2904 unsigned tmp = 0;
2905
2906 /* get the data from circular buffer
2907 must check for end of buffer */
2908 trace_pkt->data_avail = 0x01;
2909
2910 if ((data_ptr + real_len) >
2911 chdlc_priv_area->end_addr_trace_buffer + 1){
2912
2913 tmp = chdlc_priv_area->end_addr_trace_buffer - data_ptr + 1;
2914 sdla_peek(&card->hw, data_ptr,
2915 trace_pkt->data,tmp);
2916 data_ptr = chdlc_priv_area->base_addr_trace_buffer;
2917 }
2918
2919 sdla_peek(&card->hw, data_ptr,
2920 &trace_pkt->data[tmp], real_len - tmp);
2921 }
2922
2923 /* zero the opp flag to show we got the frame */
2924 ut_char = 0x00;
2925 sdla_poke(&card->hw, chdlc_priv_area->curr_trace_addr, &ut_char, 1);
2926
2927 /* now move onto the next frame */
2928 chdlc_priv_area->curr_trace_addr += sizeof(TRACE_STATUS_ELEMENT_STRUCT);
2929
2930 /* check if we went over the last address */
2931 if ( chdlc_priv_area->curr_trace_addr > chdlc_priv_area->end_trace_addr ) {
2932 chdlc_priv_area->curr_trace_addr = chdlc_priv_area->start_trace_addr;
2933 }
2934
2935 if(trace_pkt->data_avail == 0x01) {
2936 buffer_length += real_len - 1;
2937 }
2938
2939 /* for the header */
2940 buffer_length += sizeof(trace_pkt_t);
2941
2942 } /* For Loop */
2943
2944 if (frames == chdlc_priv_area->number_trace_elements){
2945 chdlc_udp_pkt->trace_info.ismoredata = 0x01;
2946 }
2947 chdlc_udp_pkt->trace_info.num_frames = frames;
2948
2949 mb->buffer_length = buffer_length;
2950 chdlc_udp_pkt->cblock.buffer_length = buffer_length;
2951
2952 chdlc_udp_pkt->cblock.return_code = COMMAND_OK;
2953
2954 break;
2955
2956
2957 case CPIPE_FT1_READ_STATUS:
2958 ((unsigned char *)chdlc_udp_pkt->data )[0] =
2959 flags->FT1_info_struct.parallel_port_A_input;
2960
2961 ((unsigned char *)chdlc_udp_pkt->data )[1] =
2962 flags->FT1_info_struct.parallel_port_B_input;
2963
2964 chdlc_udp_pkt->cblock.return_code = COMMAND_OK;
2965 chdlc_udp_pkt->cblock.buffer_length = 2;
2966 mb->buffer_length = 2;
2967 break;
2968
2969 case CPIPE_ROUTER_UP_TIME:
2970 do_gettimeofday( &tv );
2971 chdlc_priv_area->router_up_time = tv.tv_sec -
2972 chdlc_priv_area->router_start_time;
2973 *(unsigned long *)&chdlc_udp_pkt->data =
2974 chdlc_priv_area->router_up_time;
2975 mb->buffer_length = sizeof(unsigned long);
2976 chdlc_udp_pkt->cblock.buffer_length = sizeof(unsigned long);
2977 chdlc_udp_pkt->cblock.return_code = COMMAND_OK;
2978 break;
2979
2980 case FT1_MONITOR_STATUS_CTRL:
2981 /* Enable FT1 MONITOR STATUS */
2982 if ((chdlc_udp_pkt->data[0] & ENABLE_READ_FT1_STATUS) ||
2983 (chdlc_udp_pkt->data[0] & ENABLE_READ_FT1_OP_STATS)) {
2984
2985 if( rCount++ != 0 ) {
2986 chdlc_udp_pkt->cblock.
2987 return_code = COMMAND_OK;
2988 mb->buffer_length = 1;
2989 break;
2990 }
2991 }
2992
2993 /* Disable FT1 MONITOR STATUS */
2994 if( chdlc_udp_pkt->data[0] == 0) {
2995
2996 if( --rCount != 0) {
2997 chdlc_udp_pkt->cblock.
2998 return_code = COMMAND_OK;
2999 mb->buffer_length = 1;
3000 break;
3001 }
3002 }
3003 goto dflt_1;
3004
3005 default:
3006dflt_1:
3007 /* it's a board command */
3008 mb->command = chdlc_udp_pkt->cblock.command;
3009 mb->buffer_length = chdlc_udp_pkt->cblock.buffer_length;
3010 if (mb->buffer_length) {
3011 memcpy(&mb->data, (unsigned char *) chdlc_udp_pkt->
3012 data, mb->buffer_length);
3013 }
3014 /* run the command on the board */
3015 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
3016 if (err != COMMAND_OK) {
3017 break;
3018 }
3019
3020 /* copy the result back to our buffer */
3021 memcpy(&chdlc_udp_pkt->cblock, mb, sizeof(cblock_t));
3022
3023 if (mb->buffer_length) {
3024 memcpy(&chdlc_udp_pkt->data, &mb->data,
3025 mb->buffer_length);
3026 }
3027
3028 } /* end of switch */
3029 } /* end of else */
3030
3031 /* Fill UDP TTL */
3032 chdlc_udp_pkt->ip_pkt.ttl = card->wandev.ttl;
3033
3034 len = reply_udp(chdlc_priv_area->udp_pkt_data, mb->buffer_length);
3035
3036
3037 if(chdlc_priv_area->udp_pkt_src == UDP_PKT_FRM_NETWORK){
3038
3039 /* Must check if we interrupted if_send() routine. The
3040 * tx buffers might be used. If so drop the packet */
3041 if (!test_bit(SEND_CRIT,&card->wandev.critical)) {
3042
3043 if(!chdlc_send(card, chdlc_priv_area->udp_pkt_data, len)) {
3044 ++ card->wandev.stats.tx_packets;
3045 card->wandev.stats.tx_bytes += len;
3046 }
3047 }
3048 } else {
3049
3050 /* Pass it up the stack
3051 Allocate socket buffer */
3052 if ((new_skb = dev_alloc_skb(len)) != NULL) {
3053 /* copy data into new_skb */
3054
3055 buf = skb_put(new_skb, len);
3056 memcpy(buf, chdlc_priv_area->udp_pkt_data, len);
3057
3058 /* Decapsulate pkt and pass it up the protocol stack */
3059 new_skb->protocol = htons(ETH_P_IP);
3060 new_skb->dev = dev;
3061 new_skb->mac.raw = new_skb->data;
3062
3063 netif_rx(new_skb);
3064 dev->last_rx = jiffies;
3065 } else {
3066
3067 printk(KERN_INFO "%s: no socket buffers available!\n",
3068 card->devname);
3069 }
3070 }
3071
3072 chdlc_priv_area->udp_pkt_lgth = 0;
3073
3074 return 0;
3075}
3076
3077/*============================================================================
3078 * Initialize Receive and Transmit Buffers.
3079 */
3080
3081static void init_chdlc_tx_rx_buff( sdla_t* card)
3082{
3083 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
3084 CHDLC_TX_STATUS_EL_CFG_STRUCT *tx_config;
3085 CHDLC_RX_STATUS_EL_CFG_STRUCT *rx_config;
3086 char err;
3087
3088 mb->buffer_length = 0;
3089 mb->command = READ_CHDLC_CONFIGURATION;
3090 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
3091
3092 if(err != COMMAND_OK) {
3093 if (card->wandev.dev){
3094 chdlc_error(card,err,mb);
3095 }
3096 return;
3097 }
3098
3099 if(card->hw.type == SDLA_S514) {
3100 tx_config = (CHDLC_TX_STATUS_EL_CFG_STRUCT *)(card->hw.dpmbase +
3101 (((CHDLC_CONFIGURATION_STRUCT *)mb->data)->
3102 ptr_CHDLC_Tx_stat_el_cfg_struct));
3103 rx_config = (CHDLC_RX_STATUS_EL_CFG_STRUCT *)(card->hw.dpmbase +
3104 (((CHDLC_CONFIGURATION_STRUCT *)mb->data)->
3105 ptr_CHDLC_Rx_stat_el_cfg_struct));
3106
3107 /* Setup Head and Tails for buffers */
3108 card->u.c.txbuf_base = (void *)(card->hw.dpmbase +
3109 tx_config->base_addr_Tx_status_elements);
3110 card->u.c.txbuf_last =
3111 (CHDLC_DATA_TX_STATUS_EL_STRUCT *)
3112 card->u.c.txbuf_base +
3113 (tx_config->number_Tx_status_elements - 1);
3114
3115 card->u.c.rxbuf_base = (void *)(card->hw.dpmbase +
3116 rx_config->base_addr_Rx_status_elements);
3117 card->u.c.rxbuf_last =
3118 (CHDLC_DATA_RX_STATUS_EL_STRUCT *)
3119 card->u.c.rxbuf_base +
3120 (rx_config->number_Rx_status_elements - 1);
3121
3122 /* Set up next pointer to be used */
3123 card->u.c.txbuf = (void *)(card->hw.dpmbase +
3124 tx_config->next_Tx_status_element_to_use);
3125 card->u.c.rxmb = (void *)(card->hw.dpmbase +
3126 rx_config->next_Rx_status_element_to_use);
3127 }
3128 else {
3129 tx_config = (CHDLC_TX_STATUS_EL_CFG_STRUCT *)(card->hw.dpmbase +
3130 (((CHDLC_CONFIGURATION_STRUCT *)mb->data)->
3131 ptr_CHDLC_Tx_stat_el_cfg_struct % SDLA_WINDOWSIZE));
3132
3133 rx_config = (CHDLC_RX_STATUS_EL_CFG_STRUCT *)(card->hw.dpmbase +
3134 (((CHDLC_CONFIGURATION_STRUCT *)mb->data)->
3135 ptr_CHDLC_Rx_stat_el_cfg_struct % SDLA_WINDOWSIZE));
3136
3137 /* Setup Head and Tails for buffers */
3138 card->u.c.txbuf_base = (void *)(card->hw.dpmbase +
3139 (tx_config->base_addr_Tx_status_elements % SDLA_WINDOWSIZE));
3140 card->u.c.txbuf_last =
3141 (CHDLC_DATA_TX_STATUS_EL_STRUCT *)card->u.c.txbuf_base
3142 + (tx_config->number_Tx_status_elements - 1);
3143 card->u.c.rxbuf_base = (void *)(card->hw.dpmbase +
3144 (rx_config->base_addr_Rx_status_elements % SDLA_WINDOWSIZE));
3145 card->u.c.rxbuf_last =
3146 (CHDLC_DATA_RX_STATUS_EL_STRUCT *)card->u.c.rxbuf_base
3147 + (rx_config->number_Rx_status_elements - 1);
3148
3149 /* Set up next pointer to be used */
3150 card->u.c.txbuf = (void *)(card->hw.dpmbase +
3151 (tx_config->next_Tx_status_element_to_use % SDLA_WINDOWSIZE));
3152 card->u.c.rxmb = (void *)(card->hw.dpmbase +
3153 (rx_config->next_Rx_status_element_to_use % SDLA_WINDOWSIZE));
3154 }
3155
3156 /* Setup Actual Buffer Start and end addresses */
3157 card->u.c.rx_base = rx_config->base_addr_Rx_buffer;
3158 card->u.c.rx_top = rx_config->end_addr_Rx_buffer;
3159
3160}
3161
3162/*=============================================================================
3163 * Perform Interrupt Test by running READ_CHDLC_CODE_VERSION command MAX_INTR
3164 * _TEST_COUNTER times.
3165 */
3166static int intr_test( sdla_t* card)
3167{
3168 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
3169 int err,i;
3170
3171 Intr_test_counter = 0;
3172
3173 err = chdlc_set_intr_mode(card, APP_INT_ON_COMMAND_COMPLETE);
3174
3175 if (err == CMD_OK) {
3176 for (i = 0; i < MAX_INTR_TEST_COUNTER; i ++) {
3177 mb->buffer_length = 0;
3178 mb->command = READ_CHDLC_CODE_VERSION;
3179 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
3180 if (err != CMD_OK)
3181 chdlc_error(card, err, mb);
3182 }
3183 }
3184 else {
3185 return err;
3186 }
3187
3188 err = chdlc_set_intr_mode(card, 0);
3189
3190 if (err != CMD_OK)
3191 return err;
3192
3193 return 0;
3194}
3195
3196/*==============================================================================
3197 * Determine what type of UDP call it is. CPIPEAB ?
3198 */
3199static int udp_pkt_type(struct sk_buff *skb, sdla_t* card)
3200{
3201 chdlc_udp_pkt_t *chdlc_udp_pkt = (chdlc_udp_pkt_t *)skb->data;
3202
3203#ifdef _WAN_UDP_DEBUG
3204 printk(KERN_INFO "SIG %s = %s\n\
3205 UPP %x = %x\n\
3206 PRT %x = %x\n\
3207 REQ %i = %i\n\
3208 36 th = %x 37th = %x\n",
3209 chdlc_udp_pkt->wp_mgmt.signature,
3210 UDPMGMT_SIGNATURE,
3211 chdlc_udp_pkt->udp_pkt.udp_dst_port,
3212 ntohs(card->wandev.udp_port),
3213 chdlc_udp_pkt->ip_pkt.protocol,
3214 UDPMGMT_UDP_PROTOCOL,
3215 chdlc_udp_pkt->wp_mgmt.request_reply,
3216 UDPMGMT_REQUEST,
3217 skb->data[36], skb->data[37]);
3218#endif
3219
3220 if (!strncmp(chdlc_udp_pkt->wp_mgmt.signature,UDPMGMT_SIGNATURE,8) &&
3221 (chdlc_udp_pkt->udp_pkt.udp_dst_port == ntohs(card->wandev.udp_port)) &&
3222 (chdlc_udp_pkt->ip_pkt.protocol == UDPMGMT_UDP_PROTOCOL) &&
3223 (chdlc_udp_pkt->wp_mgmt.request_reply == UDPMGMT_REQUEST)) {
3224
3225 return UDP_CPIPE_TYPE;
3226
3227 }else{
3228 return UDP_INVALID_TYPE;
3229 }
3230}
3231
3232/*============================================================================
3233 * Set PORT state.
3234 */
3235static void port_set_state (sdla_t *card, int state)
3236{
3237 if (card->u.c.state != state)
3238 {
3239 switch (state)
3240 {
3241 case WAN_CONNECTED:
3242 printk (KERN_INFO "%s: Link connected!\n",
3243 card->devname);
3244 break;
3245
3246 case WAN_CONNECTING:
3247 printk (KERN_INFO "%s: Link connecting...\n",
3248 card->devname);
3249 break;
3250
3251 case WAN_DISCONNECTED:
3252 printk (KERN_INFO "%s: Link disconnected!\n",
3253 card->devname);
3254 break;
3255 }
3256
3257 card->wandev.state = card->u.c.state = state;
3258 if (card->wandev.dev){
3259 struct net_device *dev = card->wandev.dev;
3260 chdlc_private_area_t *chdlc_priv_area = dev->priv;
3261 chdlc_priv_area->common.state = state;
3262 }
3263 }
3264}
3265
3266/*===========================================================================
3267 * config_chdlc
3268 *
3269 * Configure the chdlc protocol and enable communications.
3270 *
3271 * The if_open() function binds this function to the poll routine.
3272 * Therefore, this function will run every time the chdlc interface
3273 * is brought up. We cannot run this function from the if_open
3274 * because if_open does not have access to the remote IP address.
3275 *
3276 * If the communications are not enabled, proceed to configure
3277 * the card and enable communications.
3278 *
3279 * If the communications are enabled, it means that the interface
3280 * was shutdown by ether the user or driver. In this case, we
3281 * have to check that the IP addresses have not changed. If
3282 * the IP addresses have changed, we have to reconfigure the firmware
3283 * and update the changed IP addresses. Otherwise, just exit.
3284 *
3285 */
3286
3287static int config_chdlc (sdla_t *card)
3288{
3289 struct net_device *dev = card->wandev.dev;
3290 chdlc_private_area_t *chdlc_priv_area = dev->priv;
3291 SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags;
3292
3293 if (card->u.c.comm_enabled){
3294
3295 /* Jun 20. 2000: NC
3296 * IP addresses are not used in the API mode */
3297
3298 if ((chdlc_priv_area->ip_local_tmp != chdlc_priv_area->ip_local ||
3299 chdlc_priv_area->ip_remote_tmp != chdlc_priv_area->ip_remote) &&
3300 card->u.c.usedby == WANPIPE) {
3301
3302 /* The IP addersses have changed, we must
3303 * stop the communications and reconfigure
3304 * the card. Reason: the firmware must know
3305 * the local and remote IP addresses. */
3306 disable_comm(card);
3307 port_set_state(card, WAN_DISCONNECTED);
3308 printk(KERN_INFO
3309 "%s: IP addresses changed!\n",
3310 card->devname);
3311 printk(KERN_INFO
3312 "%s: Restarting communications ...\n",
3313 card->devname);
3314 }else{
3315 /* IP addresses are the same and the link is up,
3316 * we don't have to do anything here. Therefore, exit */
3317 return 0;
3318 }
3319 }
3320
3321 chdlc_priv_area->ip_local = chdlc_priv_area->ip_local_tmp;
3322 chdlc_priv_area->ip_remote = chdlc_priv_area->ip_remote_tmp;
3323
3324
3325 /* Setup the Board for asynchronous mode */
3326 if (card->u.c.async_mode){
3327
3328 if (set_asy_config(card)) {
3329 printk (KERN_INFO "%s: Failed CHDLC Async configuration!\n",
3330 card->devname);
3331 return 0;
3332 }
3333 }else{
3334 /* Setup the Board for CHDLC */
3335 if (set_chdlc_config(card)) {
3336 printk (KERN_INFO "%s: Failed CHDLC configuration!\n",
3337 card->devname);
3338 return 0;
3339 }
3340 }
3341
3342 /* Set interrupt mode and mask */
3343 if (chdlc_set_intr_mode(card, APP_INT_ON_RX_FRAME |
3344 APP_INT_ON_GLOBAL_EXCEP_COND |
3345 APP_INT_ON_TX_FRAME |
3346 APP_INT_ON_CHDLC_EXCEP_COND | APP_INT_ON_TIMER)){
3347 printk (KERN_INFO "%s: Failed to set interrupt triggers!\n",
3348 card->devname);
3349 return 0;
3350 }
3351
3352
3353 /* Mask the Transmit and Timer interrupt */
3354 flags->interrupt_info_struct.interrupt_permission &=
3355 ~(APP_INT_ON_TX_FRAME | APP_INT_ON_TIMER);
3356
3357 /* In TTY mode, receive interrupt will be enabled during
3358 * wanpipe_tty_open() operation */
3359 if (card->tty_opt){
3360 flags->interrupt_info_struct.interrupt_permission &= ~APP_INT_ON_RX_FRAME;
3361 }
3362
3363 /* Enable communications */
3364 if (card->u.c.async_mode){
3365 if (asy_comm_enable(card) != 0) {
3366 printk(KERN_INFO "%s: Failed to enable async commnunication!\n",
3367 card->devname);
3368 flags->interrupt_info_struct.interrupt_permission = 0;
3369 card->u.c.comm_enabled=0;
3370 chdlc_set_intr_mode(card,0);
3371 return 0;
3372 }
3373 }else{
3374 if (chdlc_comm_enable(card) != 0) {
3375 printk(KERN_INFO "%s: Failed to enable chdlc communications!\n",
3376 card->devname);
3377 flags->interrupt_info_struct.interrupt_permission = 0;
3378 card->u.c.comm_enabled=0;
3379 chdlc_set_intr_mode(card,0);
3380 return 0;
3381 }
3382 }
3383
3384 /* Initialize Rx/Tx buffer control fields */
3385 init_chdlc_tx_rx_buff(card);
3386 port_set_state(card, WAN_CONNECTING);
3387 return 0;
3388}
3389
3390
3391/*============================================================
3392 * chdlc_poll
3393 *
3394 * Rationale:
3395 * We cannot manipulate the routing tables, or
3396 * ip addresses withing the interrupt. Therefore
3397 * we must perform such actons outside an interrupt
3398 * at a later time.
3399 *
3400 * Description:
3401 * CHDLC polling routine, responsible for
3402 * shutting down interfaces upon disconnect
3403 * and adding/removing routes.
3404 *
3405 * Usage:
3406 * This function is executed for each CHDLC
3407 * interface through a tq_schedule bottom half.
3408 *
3409 * trigger_chdlc_poll() function is used to kick
3410 * the chldc_poll routine.
3411 */
3412
3413static void chdlc_poll(struct net_device *dev)
3414{
3415 chdlc_private_area_t *chdlc_priv_area;
3416 sdla_t *card;
3417 u8 check_gateway=0;
3418 SHARED_MEMORY_INFO_STRUCT* flags;
3419
3420
3421 if (!dev || (chdlc_priv_area=dev->priv) == NULL)
3422 return;
3423
3424 card = chdlc_priv_area->card;
3425 flags = card->u.c.flags;
3426
3427 /* (Re)Configuraiton is in progress, stop what you are
3428 * doing and get out */
3429 if (test_bit(PERI_CRIT,&card->wandev.critical)){
3430 clear_bit(POLL_CRIT,&card->wandev.critical);
3431 return;
3432 }
3433
3434 /* if_open() function has triggered the polling routine
3435 * to determine the configured IP addresses. Once the
3436 * addresses are found, trigger the chdlc configuration */
3437 if (test_bit(0,&chdlc_priv_area->config_chdlc)){
3438
3439 chdlc_priv_area->ip_local_tmp = get_ip_address(dev,WAN_LOCAL_IP);
3440 chdlc_priv_area->ip_remote_tmp = get_ip_address(dev,WAN_POINTOPOINT_IP);
3441
3442 /* Jun 20. 2000 Bug Fix
3443 * Only perform this check in WANPIPE mode, since
3444 * IP addresses are not used in the API mode. */
3445
3446 if (chdlc_priv_area->ip_local_tmp == chdlc_priv_area->ip_remote_tmp &&
3447 card->u.c.slarp_timer == 0x00 &&
3448 !card->u.c.backup &&
3449 card->u.c.usedby == WANPIPE){
3450
3451 if (++chdlc_priv_area->ip_error > MAX_IP_ERRORS){
3452 printk(KERN_INFO "\n%s: --- WARNING ---\n",
3453 card->devname);
3454 printk(KERN_INFO
3455 "%s: The local IP address is the same as the\n",
3456 card->devname);
3457 printk(KERN_INFO
3458 "%s: Point-to-Point IP address.\n",
3459 card->devname);
3460 printk(KERN_INFO "%s: --- WARNING ---\n\n",
3461 card->devname);
3462 }else{
3463 clear_bit(POLL_CRIT,&card->wandev.critical);
3464 chdlc_priv_area->poll_delay_timer.expires = jiffies+HZ;
3465 add_timer(&chdlc_priv_area->poll_delay_timer);
3466 return;
3467 }
3468 }
3469
3470 clear_bit(0,&chdlc_priv_area->config_chdlc);
3471 clear_bit(POLL_CRIT,&card->wandev.critical);
3472
3473 chdlc_priv_area->timer_int_enabled |= TMR_INT_ENABLED_CONFIG;
3474 flags->interrupt_info_struct.interrupt_permission |= APP_INT_ON_TIMER;
3475 return;
3476 }
3477 /* Dynamic interface implementation, as well as dynamic
3478 * routing. */
3479
3480 switch (card->u.c.state){
3481
3482 case WAN_DISCONNECTED:
3483
3484 /* If the dynamic interface configuration is on, and interface
3485 * is up, then bring down the netowrk interface */
3486
3487 if (test_bit(DYN_OPT_ON,&chdlc_priv_area->interface_down) &&
3488 !test_bit(DEV_DOWN, &chdlc_priv_area->interface_down) &&
3489 card->wandev.dev->flags & IFF_UP){
3490
3491 printk(KERN_INFO "%s: Interface %s down.\n",
3492 card->devname,card->wandev.dev->name);
3493 change_dev_flags(card->wandev.dev,(card->wandev.dev->flags&~IFF_UP));
3494 set_bit(DEV_DOWN,&chdlc_priv_area->interface_down);
3495 chdlc_priv_area->route_status = NO_ROUTE;
3496
3497 }else{
3498 /* We need to check if the local IP address is
3499 * zero. If it is, we shouldn't try to remove it.
3500 */
3501
3502 if (card->wandev.dev->flags & IFF_UP &&
3503 get_ip_address(card->wandev.dev,WAN_LOCAL_IP) &&
3504 chdlc_priv_area->route_status != NO_ROUTE &&
3505 card->u.c.slarp_timer){
3506
3507 process_route(card);
3508 }
3509 }
3510 break;
3511
3512 case WAN_CONNECTED:
3513
3514 /* In SMP machine this code can execute before the interface
3515 * comes up. In this case, we must make sure that we do not
3516 * try to bring up the interface before dev_open() is finished */
3517
3518
3519 /* DEV_DOWN will be set only when we bring down the interface
3520 * for the very first time. This way we know that it was us
3521 * that brought the interface down */
3522
3523 if (test_bit(DYN_OPT_ON,&chdlc_priv_area->interface_down) &&
3524 test_bit(DEV_DOWN, &chdlc_priv_area->interface_down) &&
3525 !(card->wandev.dev->flags & IFF_UP)){
3526
3527 printk(KERN_INFO "%s: Interface %s up.\n",
3528 card->devname,card->wandev.dev->name);
3529 change_dev_flags(card->wandev.dev,(card->wandev.dev->flags|IFF_UP));
3530 clear_bit(DEV_DOWN,&chdlc_priv_area->interface_down);
3531 check_gateway=1;
3532 }
3533
3534 if (chdlc_priv_area->route_status == ADD_ROUTE &&
3535 card->u.c.slarp_timer){
3536
3537 process_route(card);
3538 check_gateway=1;
3539 }
3540
3541 if (chdlc_priv_area->gateway && check_gateway)
3542 add_gateway(card,dev);
3543
3544 break;
3545 }
3546
3547 clear_bit(POLL_CRIT,&card->wandev.critical);
3548}
3549
3550/*============================================================
3551 * trigger_chdlc_poll
3552 *
3553 * Description:
3554 * Add a chdlc_poll() work entry into the keventd work queue
3555 * for a specific dlci/interface. This will kick
3556 * the fr_poll() routine at a later time.
3557 *
3558 * Usage:
3559 * Interrupts use this to defer a taks to
3560 * a polling routine.
3561 *
3562 */
3563static void trigger_chdlc_poll(struct net_device *dev)
3564{
3565 chdlc_private_area_t *chdlc_priv_area;
3566 sdla_t *card;
3567
3568 if (!dev)
3569 return;
3570
3571 if ((chdlc_priv_area = dev->priv)==NULL)
3572 return;
3573
3574 card = chdlc_priv_area->card;
3575
3576 if (test_and_set_bit(POLL_CRIT,&card->wandev.critical)){
3577 return;
3578 }
3579 if (test_bit(PERI_CRIT,&card->wandev.critical)){
3580 return;
3581 }
3582 schedule_work(&chdlc_priv_area->poll_work);
3583}
3584
3585
3586static void chdlc_poll_delay (unsigned long dev_ptr)
3587{
3588 struct net_device *dev = (struct net_device *)dev_ptr;
3589 trigger_chdlc_poll(dev);
3590}
3591
3592
3593void s508_lock (sdla_t *card, unsigned long *smp_flags)
3594{
3595 spin_lock_irqsave(&card->wandev.lock, *smp_flags);
3596 if (card->next){
3597 spin_lock(&card->next->wandev.lock);
3598 }
3599}
3600
3601void s508_unlock (sdla_t *card, unsigned long *smp_flags)
3602{
3603 if (card->next){
3604 spin_unlock(&card->next->wandev.lock);
3605 }
3606 spin_unlock_irqrestore(&card->wandev.lock, *smp_flags);
3607}
3608
3609//*********** TTY SECTION ****************
3610
3611static void wanpipe_tty_trigger_tx_irq(sdla_t *card)
3612{
3613 SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags;
3614 INTERRUPT_INFORMATION_STRUCT *chdlc_int = &flags->interrupt_info_struct;
3615 chdlc_int->interrupt_permission |= APP_INT_ON_TX_FRAME;
3616}
3617
3618static void wanpipe_tty_trigger_poll(sdla_t *card)
3619{
3620 schedule_work(&card->tty_work);
3621}
3622
3623static void tty_poll_work (void* data)
3624{
3625 sdla_t *card = (sdla_t*)data;
3626 struct tty_struct *tty;
3627
3628 if ((tty=card->tty)==NULL)
3629 return;
3630
3631 tty_wakeup(tty);
3632#if defined(SERIAL_HAVE_POLL_WAIT)
3633 wake_up_interruptible(&tty->poll_wait);
3634#endif
3635 return;
3636}
3637
3638static void wanpipe_tty_close(struct tty_struct *tty, struct file * filp)
3639{
3640 sdla_t *card;
3641 unsigned long smp_flags;
3642
3643 if (!tty || !tty->driver_data){
3644 return;
3645 }
3646
3647 card = (sdla_t*)tty->driver_data;
3648
3649 if (!card)
3650 return;
3651
3652 printk(KERN_INFO "%s: Closing TTY Driver!\n",
3653 card->devname);
3654
3655 /* Sanity Check */
3656 if (!card->tty_open)
3657 return;
3658
3659 wanpipe_close(card);
3660 if (--card->tty_open == 0){
3661
3662 lock_adapter_irq(&card->wandev.lock,&smp_flags);
3663 card->tty=NULL;
3664 chdlc_disable_comm_shutdown(card);
3665 unlock_adapter_irq(&card->wandev.lock,&smp_flags);
3666
3667 kfree(card->tty_buf);
3668 card->tty_buf = NULL;
3669 kfree(card->tty_rx);
3670 card->tty_rx = NULL;
3671 }
3672 return;
3673}
3674static int wanpipe_tty_open(struct tty_struct *tty, struct file * filp)
3675{
3676 unsigned long smp_flags;
3677 sdla_t *card;
3678
3679 if (!tty){
3680 return -ENODEV;
3681 }
3682
3683 if (!tty->driver_data){
3684 int port;
3685 port = tty->index;
3686 if ((port < 0) || (port >= NR_PORTS))
3687 return -ENODEV;
3688
3689 tty->driver_data = WAN_CARD(port);
3690 if (!tty->driver_data)
3691 return -ENODEV;
3692 }
3693
3694 card = (sdla_t*)tty->driver_data;
3695
3696 if (!card){
3697 lock_adapter_irq(&card->wandev.lock,&smp_flags);
3698 card->tty=NULL;
3699 unlock_adapter_irq(&card->wandev.lock,&smp_flags);
3700 return -ENODEV;
3701 }
3702
3703 printk(KERN_INFO "%s: Opening TTY Driver!\n",
3704 card->devname);
3705
3706 if (card->tty_open == 0){
3707 lock_adapter_irq(&card->wandev.lock,&smp_flags);
3708 card->tty=tty;
3709 unlock_adapter_irq(&card->wandev.lock,&smp_flags);
3710
3711 if (!card->tty_buf){
3712 card->tty_buf = kmalloc(TTY_CHDLC_MAX_MTU, GFP_KERNEL);
3713 if (!card->tty_buf){
3714 card->tty_buf=NULL;
3715 card->tty=NULL;
3716 return -ENOMEM;
3717 }
3718 }
3719
3720 if (!card->tty_rx){
3721 card->tty_rx = kmalloc(TTY_CHDLC_MAX_MTU, GFP_KERNEL);
3722 if (!card->tty_rx){
3723 /* Free the buffer above */
3724 kfree(card->tty_buf);
3725 card->tty_buf=NULL;
3726 card->tty=NULL;
3727 return -ENOMEM;
3728 }
3729 }
3730 }
3731
3732 ++card->tty_open;
3733 wanpipe_open(card);
3734 return 0;
3735}
3736
3737static int wanpipe_tty_write(struct tty_struct * tty, const unsigned char *buf, int count)
3738{
3739 unsigned long smp_flags=0;
3740 sdla_t *card=NULL;
3741
3742 if (!tty){
3743 dbg_printk(KERN_INFO "NO TTY in Write\n");
3744 return -ENODEV;
3745 }
3746
3747 card = (sdla_t *)tty->driver_data;
3748
3749 if (!card){
3750 dbg_printk(KERN_INFO "No Card in TTY Write\n");
3751 return -ENODEV;
3752 }
3753
3754 if (count > card->wandev.mtu){
3755 dbg_printk(KERN_INFO "Frame too big in Write %i Max: %i\n",
3756 count,card->wandev.mtu);
3757 return -EINVAL;
3758 }
3759
3760 if (card->wandev.state != WAN_CONNECTED){
3761 dbg_printk(KERN_INFO "Card not connected in TTY Write\n");
3762 return -EINVAL;
3763 }
3764
3765 /* Lock the 508 Card: SMP is supported */
3766 if(card->hw.type != SDLA_S514){
3767 s508_lock(card,&smp_flags);
3768 }
3769
3770 if (test_and_set_bit(SEND_CRIT,(void*)&card->wandev.critical)){
3771 printk(KERN_INFO "%s: Critical in TTY Write\n",
3772 card->devname);
3773
3774 /* Lock the 508 Card: SMP is supported */
3775 if(card->hw.type != SDLA_S514)
3776 s508_unlock(card,&smp_flags);
3777
3778 return -EINVAL;
3779 }
3780
3781 if (chdlc_send(card,(void*)buf,count)){
3782 dbg_printk(KERN_INFO "%s: Failed to send, retry later: kernel!\n",
3783 card->devname);
3784 clear_bit(SEND_CRIT,(void*)&card->wandev.critical);
3785
3786 wanpipe_tty_trigger_tx_irq(card);
3787
3788 if(card->hw.type != SDLA_S514)
3789 s508_unlock(card,&smp_flags);
3790 return 0;
3791 }
3792 dbg_printk(KERN_INFO "%s: Packet sent OK: %i\n",card->devname,count);
3793 clear_bit(SEND_CRIT,(void*)&card->wandev.critical);
3794
3795 if(card->hw.type != SDLA_S514)
3796 s508_unlock(card,&smp_flags);
3797
3798 return count;
3799}
3800
3801static void wanpipe_tty_receive(sdla_t *card, unsigned addr, unsigned int len)
3802{
3803 unsigned offset=0;
3804 unsigned olen=len;
3805 char fp=0;
3806 struct tty_struct *tty;
3807 int i;
3808 struct tty_ldisc *ld;
3809
3810 if (!card->tty_open){
3811 dbg_printk(KERN_INFO "%s: TTY not open during receive\n",
3812 card->devname);
3813 return;
3814 }
3815
3816 if ((tty=card->tty) == NULL){
3817 dbg_printk(KERN_INFO "%s: No TTY on receive\n",
3818 card->devname);
3819 return;
3820 }
3821
3822 if (!tty->driver_data){
3823 dbg_printk(KERN_INFO "%s: No Driver Data, or Flip on receive\n",
3824 card->devname);
3825 return;
3826 }
3827
3828
3829 if (card->u.c.async_mode){
3830 if ((tty->flip.count+len) >= TTY_FLIPBUF_SIZE){
3831 if (net_ratelimit()){
3832 printk(KERN_INFO
3833 "%s: Received packet size too big: %i bytes, Max: %i!\n",
3834 card->devname,len,TTY_FLIPBUF_SIZE);
3835 }
3836 return;
3837 }
3838
3839
3840 if((addr + len) > card->u.c.rx_top + 1) {
3841 offset = card->u.c.rx_top - addr + 1;
3842
3843 sdla_peek(&card->hw, addr, tty->flip.char_buf_ptr, offset);
3844
3845 addr = card->u.c.rx_base;
3846 len -= offset;
3847
3848 tty->flip.char_buf_ptr+=offset;
3849 tty->flip.count+=offset;
3850 for (i=0;i<offset;i++){
3851 *tty->flip.flag_buf_ptr = 0;
3852 tty->flip.flag_buf_ptr++;
3853 }
3854 }
3855
3856 sdla_peek(&card->hw, addr, tty->flip.char_buf_ptr, len);
3857
3858 tty->flip.char_buf_ptr+=len;
3859 card->tty->flip.count+=len;
3860 for (i=0;i<len;i++){
3861 *tty->flip.flag_buf_ptr = 0;
3862 tty->flip.flag_buf_ptr++;
3863 }
3864
3865 tty->low_latency=1;
3866 tty_flip_buffer_push(tty);
3867 }else{
3868 if (!card->tty_rx){
3869 if (net_ratelimit()){
3870 printk(KERN_INFO
3871 "%s: Receive sync buffer not available!\n",
3872 card->devname);
3873 }
3874 return;
3875 }
3876
3877 if (len > TTY_CHDLC_MAX_MTU){
3878 if (net_ratelimit()){
3879 printk(KERN_INFO
3880 "%s: Received packet size too big: %i bytes, Max: %i!\n",
3881 card->devname,len,TTY_FLIPBUF_SIZE);
3882 }
3883 return;
3884 }
3885
3886
3887 if((addr + len) > card->u.c.rx_top + 1) {
3888 offset = card->u.c.rx_top - addr + 1;
3889
3890 sdla_peek(&card->hw, addr, card->tty_rx, offset);
3891
3892 addr = card->u.c.rx_base;
3893 len -= offset;
3894 }
3895 sdla_peek(&card->hw, addr, card->tty_rx+offset, len);
3896 ld = tty_ldisc_ref(tty);
3897 if (ld) {
3898 if (ld->receive_buf)
3899 ld->receive_buf(tty,card->tty_rx,&fp,olen);
3900 tty_ldisc_deref(ld);
3901 }else{
3902 if (net_ratelimit()){
3903 printk(KERN_INFO
3904 "%s: NO TTY Sync line discipline!\n",
3905 card->devname);
3906 }
3907 }
3908 }
3909
3910 dbg_printk(KERN_INFO "%s: Received Data %i\n",card->devname,olen);
3911 return;
3912}
3913
3914#if 0
3915static int wanpipe_tty_ioctl(struct tty_struct *tty, struct file * file,
3916 unsigned int cmd, unsigned long arg)
3917{
3918 return -ENOIOCTLCMD;
3919}
3920#endif
3921
3922static void wanpipe_tty_stop(struct tty_struct *tty)
3923{
3924 return;
3925}
3926
3927static void wanpipe_tty_start(struct tty_struct *tty)
3928{
3929 return;
3930}
3931
3932static int config_tty (sdla_t *card)
3933{
3934 SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags;
3935
3936 /* Setup the Board for asynchronous mode */
3937 if (card->u.c.async_mode){
3938
3939 if (set_asy_config(card)) {
3940 printk (KERN_INFO "%s: Failed CHDLC Async configuration!\n",
3941 card->devname);
3942 return -EINVAL;
3943 }
3944 }else{
3945 /* Setup the Board for CHDLC */
3946 if (set_chdlc_config(card)) {
3947 printk (KERN_INFO "%s: Failed CHDLC configuration!\n",
3948 card->devname);
3949 return -EINVAL;
3950 }
3951 }
3952
3953 /* Set interrupt mode and mask */
3954 if (chdlc_set_intr_mode(card, APP_INT_ON_RX_FRAME |
3955 APP_INT_ON_GLOBAL_EXCEP_COND |
3956 APP_INT_ON_TX_FRAME |
3957 APP_INT_ON_CHDLC_EXCEP_COND | APP_INT_ON_TIMER)){
3958 printk (KERN_INFO "%s: Failed to set interrupt triggers!\n",
3959 card->devname);
3960 return -EINVAL;
3961 }
3962
3963
3964 /* Mask the Transmit and Timer interrupt */
3965 flags->interrupt_info_struct.interrupt_permission &=
3966 ~(APP_INT_ON_TX_FRAME | APP_INT_ON_TIMER);
3967
3968
3969 /* Enable communications */
3970 if (card->u.c.async_mode){
3971 if (asy_comm_enable(card) != 0) {
3972 printk(KERN_INFO "%s: Failed to enable async commnunication!\n",
3973 card->devname);
3974 flags->interrupt_info_struct.interrupt_permission = 0;
3975 card->u.c.comm_enabled=0;
3976 chdlc_set_intr_mode(card,0);
3977 return -EINVAL;
3978 }
3979 }else{
3980 if (chdlc_comm_enable(card) != 0) {
3981 printk(KERN_INFO "%s: Failed to enable chdlc communications!\n",
3982 card->devname);
3983 flags->interrupt_info_struct.interrupt_permission = 0;
3984 card->u.c.comm_enabled=0;
3985 chdlc_set_intr_mode(card,0);
3986 return -EINVAL;
3987 }
3988 }
3989
3990 /* Initialize Rx/Tx buffer control fields */
3991 init_chdlc_tx_rx_buff(card);
3992 port_set_state(card, WAN_CONNECTING);
3993 return 0;
3994}
3995
3996
3997static int change_speed(sdla_t *card, struct tty_struct *tty,
3998 struct termios *old_termios)
3999{
4000 int baud, ret=0;
4001 unsigned cflag;
4002 int dbits,sbits,parity,handshaking;
4003
4004 cflag = tty->termios->c_cflag;
4005
4006 /* There is always one stop bit */
4007 sbits=WANOPT_ONE;
4008
4009 /* Parity is defaulted to NONE */
4010 parity = WANOPT_NONE;
4011
4012 handshaking=0;
4013
4014 /* byte size and parity */
4015 switch (cflag & CSIZE) {
4016 case CS5: dbits = 5; break;
4017 case CS6: dbits = 6; break;
4018 case CS7: dbits = 7; break;
4019 case CS8: dbits = 8; break;
4020 /* Never happens, but GCC is too dumb to figure it out */
4021 default: dbits = 8; break;
4022 }
4023
4024 /* One more stop bit should be supported, thus increment
4025 * the number of stop bits Max=2 */
4026 if (cflag & CSTOPB) {
4027 sbits = WANOPT_TWO;
4028 }
4029 if (cflag & PARENB) {
4030 parity = WANOPT_EVEN;
4031 }
4032 if (cflag & PARODD){
4033 parity = WANOPT_ODD;
4034 }
4035
4036 /* Determine divisor based on baud rate */
4037 baud = tty_get_baud_rate(tty);
4038
4039 if (!baud)
4040 baud = 9600; /* B0 transition handled in rs_set_termios */
4041
4042 if (cflag & CRTSCTS) {
4043 handshaking|=ASY_RTS_HS_FOR_RX;
4044 }
4045
4046 if (I_IGNPAR(tty))
4047 parity = WANOPT_NONE;
4048
4049 if (I_IXOFF(tty)){
4050 handshaking|=ASY_XON_XOFF_HS_FOR_RX;
4051 handshaking|=ASY_XON_XOFF_HS_FOR_TX;
4052 }
4053
4054 if (I_IXON(tty)){
4055 handshaking|=ASY_XON_XOFF_HS_FOR_RX;
4056 handshaking|=ASY_XON_XOFF_HS_FOR_TX;
4057 }
4058
4059 if (card->u.c.async_mode){
4060 if (card->wandev.bps != baud)
4061 ret=1;
4062 card->wandev.bps = baud;
4063 }
4064
4065 if (card->u.c.async_mode){
4066 if (card->u.c.protocol_options != handshaking)
4067 ret=1;
4068 card->u.c.protocol_options = handshaking;
4069
4070 if (card->u.c.tx_bits_per_char != dbits)
4071 ret=1;
4072 card->u.c.tx_bits_per_char = dbits;
4073
4074 if (card->u.c.rx_bits_per_char != dbits)
4075 ret=1;
4076 card->u.c.rx_bits_per_char = dbits;
4077
4078 if (card->u.c.stop_bits != sbits)
4079 ret=1;
4080 card->u.c.stop_bits = sbits;
4081
4082 if (card->u.c.parity != parity)
4083 ret=1;
4084 card->u.c.parity = parity;
4085
4086 card->u.c.break_timer = 50;
4087 card->u.c.inter_char_timer = 10;
4088 card->u.c.rx_complete_length = 100;
4089 card->u.c.xon_char = 0xFE;
4090 }else{
4091 card->u.c.protocol_options = HDLC_STREAMING_MODE;
4092 }
4093
4094 return ret;
4095}
4096
4097
4098static void wanpipe_tty_set_termios(struct tty_struct *tty, struct termios *old_termios)
4099{
4100 sdla_t *card;
4101 int err=1;
4102
4103 if (!tty){
4104 return;
4105 }
4106
4107 card = (sdla_t *)tty->driver_data;
4108
4109 if (!card)
4110 return;
4111
4112 if (change_speed(card, tty, old_termios) || !card->u.c.comm_enabled){
4113 unsigned long smp_flags;
4114
4115 if (card->u.c.comm_enabled){
4116 lock_adapter_irq(&card->wandev.lock,&smp_flags);
4117 chdlc_disable_comm_shutdown(card);
4118 unlock_adapter_irq(&card->wandev.lock,&smp_flags);
4119 }
4120 lock_adapter_irq(&card->wandev.lock,&smp_flags);
4121 err = config_tty(card);
4122 unlock_adapter_irq(&card->wandev.lock,&smp_flags);
4123 if (card->u.c.async_mode){
4124 printk(KERN_INFO "%s: TTY Async Configuration:\n"
4125 " Baud =%i\n"
4126 " Handshaking =%s\n"
4127 " Tx Dbits =%i\n"
4128 " Rx Dbits =%i\n"
4129 " Parity =%s\n"
4130 " Stop Bits =%i\n",
4131 card->devname,
4132 card->wandev.bps,
4133 opt_decode[card->u.c.protocol_options],
4134 card->u.c.tx_bits_per_char,
4135 card->u.c.rx_bits_per_char,
4136 p_decode[card->u.c.parity] ,
4137 card->u.c.stop_bits);
4138 }else{
4139 printk(KERN_INFO "%s: TTY Sync Configuration:\n"
4140 " Baud =%i\n"
4141 " Protocol =HDLC_STREAMING\n",
4142 card->devname,card->wandev.bps);
4143 }
4144 if (!err){
4145 port_set_state(card,WAN_CONNECTED);
4146 }else{
4147 port_set_state(card,WAN_DISCONNECTED);
4148 }
4149 }
4150 return;
4151}
4152
4153static void wanpipe_tty_put_char(struct tty_struct *tty, unsigned char ch)
4154{
4155 sdla_t *card;
4156 unsigned long smp_flags=0;
4157
4158 if (!tty){
4159 return;
4160 }
4161
4162 card = (sdla_t *)tty->driver_data;
4163
4164 if (!card)
4165 return;
4166
4167 if (card->wandev.state != WAN_CONNECTED)
4168 return;
4169
4170 if(card->hw.type != SDLA_S514)
4171 s508_lock(card,&smp_flags);
4172
4173 if (test_and_set_bit(SEND_CRIT,(void*)&card->wandev.critical)){
4174
4175 wanpipe_tty_trigger_tx_irq(card);
4176
4177 if(card->hw.type != SDLA_S514)
4178 s508_unlock(card,&smp_flags);
4179 return;
4180 }
4181
4182 if (chdlc_send(card,(void*)&ch,1)){
4183 wanpipe_tty_trigger_tx_irq(card);
4184 dbg_printk("%s: Failed to TX char!\n",card->devname);
4185 }
4186
4187 dbg_printk("%s: Char TX OK\n",card->devname);
4188
4189 clear_bit(SEND_CRIT,(void*)&card->wandev.critical);
4190
4191 if(card->hw.type != SDLA_S514)
4192 s508_unlock(card,&smp_flags);
4193
4194 return;
4195}
4196
4197static void wanpipe_tty_flush_chars(struct tty_struct *tty)
4198{
4199 return;
4200}
4201
4202static void wanpipe_tty_flush_buffer(struct tty_struct *tty)
4203{
4204 if (!tty)
4205 return;
4206
4207#if defined(SERIAL_HAVE_POLL_WAIT)
4208 wake_up_interruptible(&tty->poll_wait);
4209#endif
4210 tty_wakeup(tty);
4211 return;
4212}
4213
4214/*
4215 * This function is used to send a high-priority XON/XOFF character to
4216 * the device
4217 */
4218static void wanpipe_tty_send_xchar(struct tty_struct *tty, char ch)
4219{
4220 return;
4221}
4222
4223
4224static int wanpipe_tty_chars_in_buffer(struct tty_struct *tty)
4225{
4226 return 0;
4227}
4228
4229
4230static int wanpipe_tty_write_room(struct tty_struct *tty)
4231{
4232 sdla_t *card;
4233
4234 printk(KERN_INFO "TTY Write Room\n");
4235
4236 if (!tty){
4237 return 0;
4238 }
4239
4240 card = (sdla_t *)tty->driver_data;
4241 if (!card)
4242 return 0;
4243
4244 if (card->wandev.state != WAN_CONNECTED)
4245 return 0;
4246
4247 return SEC_MAX_NO_DATA_BYTES_IN_FRAME;
4248}
4249
4250
4251static int set_modem_status(sdla_t *card, unsigned char data)
4252{
4253 CHDLC_MAILBOX_STRUCT *mb = card->mbox;
4254 int err;
4255
4256 mb->buffer_length=1;
4257 mb->command=SET_MODEM_STATUS;
4258 mb->data[0]=data;
4259 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
4260 if (err != COMMAND_OK)
4261 chdlc_error (card, err, mb);
4262
4263 return err;
4264}
4265
4266static void wanpipe_tty_hangup(struct tty_struct *tty)
4267{
4268 sdla_t *card;
4269 unsigned long smp_flags;
4270
4271 printk(KERN_INFO "TTY Hangup!\n");
4272
4273 if (!tty){
4274 return;
4275 }
4276
4277 card = (sdla_t *)tty->driver_data;
4278 if (!card)
4279 return;
4280
4281 lock_adapter_irq(&card->wandev.lock,&smp_flags);
4282 set_modem_status(card,0);
4283 unlock_adapter_irq(&card->wandev.lock,&smp_flags);
4284 return;
4285}
4286
4287static void wanpipe_tty_break(struct tty_struct *tty, int break_state)
4288{
4289 return;
4290}
4291
4292static void wanpipe_tty_wait_until_sent(struct tty_struct *tty, int timeout)
4293{
4294 return;
4295}
4296
4297static void wanpipe_tty_throttle(struct tty_struct * tty)
4298{
4299 return;
4300}
4301
4302static void wanpipe_tty_unthrottle(struct tty_struct * tty)
4303{
4304 return;
4305}
4306
4307int wanpipe_tty_read_proc(char *page, char **start, off_t off, int count,
4308 int *eof, void *data)
4309{
4310 return 0;
4311}
4312
4313/*
4314 * The serial driver boot-time initialization code!
4315 */
4316int wanpipe_tty_init(sdla_t *card)
4317{
4318 struct serial_state * state;
4319
4320 /* Initialize the tty_driver structure */
4321
4322 if (card->tty_minor < 0 || card->tty_minor > NR_PORTS){
4323 printk(KERN_INFO "%s: Illegal Minor TTY number (0-4): %i\n",
4324 card->devname,card->tty_minor);
4325 return -EINVAL;
4326 }
4327
4328 if (WAN_CARD(card->tty_minor)){
4329 printk(KERN_INFO "%s: TTY Minor %i, already in use\n",
4330 card->devname,card->tty_minor);
4331 return -EBUSY;
4332 }
4333
4334 if (tty_init_cnt==0){
4335
4336 printk(KERN_INFO "%s: TTY %s Driver Init: Major %i, Minor Range %i-%i\n",
4337 card->devname,
4338 card->u.c.async_mode ? "ASYNC" : "SYNC",
4339 WAN_TTY_MAJOR,MIN_PORT,MAX_PORT);
4340
4341 tty_driver_mode = card->u.c.async_mode;
4342
4343 memset(&serial_driver, 0, sizeof(struct tty_driver));
4344 serial_driver.magic = TTY_DRIVER_MAGIC;
4345 serial_driver.owner = THIS_MODULE;
4346 serial_driver.driver_name = "wanpipe_tty";
4347 serial_driver.name = "ttyW";
4348 serial_driver.major = WAN_TTY_MAJOR;
4349 serial_driver.minor_start = WAN_TTY_MINOR;
4350 serial_driver.num = NR_PORTS;
4351 serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
4352 serial_driver.subtype = SERIAL_TYPE_NORMAL;
4353
4354 serial_driver.init_termios = tty_std_termios;
4355 serial_driver.init_termios.c_cflag =
4356 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
4357 serial_driver.flags = TTY_DRIVER_REAL_RAW;
4358
4359 serial_driver.refcount = 1; /* !@!@^#^&!! */
4360
4361 serial_driver.open = wanpipe_tty_open;
4362 serial_driver.close = wanpipe_tty_close;
4363 serial_driver.write = wanpipe_tty_write;
4364
4365 serial_driver.put_char = wanpipe_tty_put_char;
4366 serial_driver.flush_chars = wanpipe_tty_flush_chars;
4367 serial_driver.write_room = wanpipe_tty_write_room;
4368 serial_driver.chars_in_buffer = wanpipe_tty_chars_in_buffer;
4369 serial_driver.flush_buffer = wanpipe_tty_flush_buffer;
4370 //serial_driver.ioctl = wanpipe_tty_ioctl;
4371 serial_driver.throttle = wanpipe_tty_throttle;
4372 serial_driver.unthrottle = wanpipe_tty_unthrottle;
4373 serial_driver.send_xchar = wanpipe_tty_send_xchar;
4374 serial_driver.set_termios = wanpipe_tty_set_termios;
4375 serial_driver.stop = wanpipe_tty_stop;
4376 serial_driver.start = wanpipe_tty_start;
4377 serial_driver.hangup = wanpipe_tty_hangup;
4378 serial_driver.break_ctl = wanpipe_tty_break;
4379 serial_driver.wait_until_sent = wanpipe_tty_wait_until_sent;
4380 serial_driver.read_proc = wanpipe_tty_read_proc;
4381
4382 if (tty_register_driver(&serial_driver)){
4383 printk(KERN_INFO "%s: Failed to register serial driver!\n",
4384 card->devname);
4385 }
4386 }
4387
4388
4389 /* The subsequent ports must comply to the initial configuration */
4390 if (tty_driver_mode != card->u.c.async_mode){
4391 printk(KERN_INFO "%s: Error: TTY Driver operation mode mismatch!\n",
4392 card->devname);
4393 printk(KERN_INFO "%s: The TTY driver is configured for %s!\n",
4394 card->devname, tty_driver_mode ? "ASYNC" : "SYNC");
4395 return -EINVAL;
4396 }
4397
4398 tty_init_cnt++;
4399
4400 printk(KERN_INFO "%s: Initializing TTY %s Driver Minor %i\n",
4401 card->devname,
4402 tty_driver_mode ? "ASYNC" : "SYNC",
4403 card->tty_minor);
4404
4405 tty_card_map[card->tty_minor] = card;
4406 state = &rs_table[card->tty_minor];
4407
4408 state->magic = SSTATE_MAGIC;
4409 state->line = 0;
4410 state->type = PORT_UNKNOWN;
4411 state->custom_divisor = 0;
4412 state->close_delay = 5*HZ/10;
4413 state->closing_wait = 30*HZ;
4414 state->icount.cts = state->icount.dsr =
4415 state->icount.rng = state->icount.dcd = 0;
4416 state->icount.rx = state->icount.tx = 0;
4417 state->icount.frame = state->icount.parity = 0;
4418 state->icount.overrun = state->icount.brk = 0;
4419 state->irq = card->wandev.irq;
4420
4421 INIT_WORK(&card->tty_work, tty_poll_work, (void*)card);
4422 return 0;
4423}
4424
4425
4426MODULE_LICENSE("GPL");
4427
4428/****** End ****************************************************************/
diff --git a/drivers/net/wan/sdla_fr.c b/drivers/net/wan/sdla_fr.c
deleted file mode 100644
index 7f1ce9d4333e..000000000000
--- a/drivers/net/wan/sdla_fr.c
+++ /dev/null
@@ -1,5061 +0,0 @@
1/*****************************************************************************
2* sdla_fr.c WANPIPE(tm) Multiprotocol WAN Link Driver. Frame relay module.
3*
4* Author(s): Nenad Corbic <ncorbic@sangoma.com>
5* Gideon Hack
6*
7* Copyright: (c) 1995-2001 Sangoma Technologies Inc.
8*
9* This program is free software; you can redistribute it and/or
10* modify it under the terms of the GNU General Public License
11* as published by the Free Software Foundation; either version
12* 2 of the License, or (at your option) any later version.
13* ============================================================================
14* Nov 23, 2000 Nenad Corbic o Added support for 2.4.X kernels
15* Nov 15, 2000 David Rokavarg
16* Nenad Corbic o Added frame relay bridging support.
17* Original code from Mark Wells and Kristian Hoffmann has
18* been integrated into the frame relay driver.
19* Nov 13, 2000 Nenad Corbic o Added true interface type encoding option.
20* Tcpdump doesn't support Frame Relay inteface
21* types, to fix this true type option will set
22* the interface type to RAW IP mode.
23* Nov 07, 2000 Nenad Corbic o Added security features for UDP debugging:
24* Deny all and specify allowed requests.
25* Nov 06, 2000 Nenad Corbic o Wanpipe interfaces conform to raw packet interfaces.
26* Moved the if_header into the if_send() routine.
27* The if_header() was breaking the libpcap
28* support. i.e. support for tcpdump, ethereal ...
29* Oct 12. 2000 Nenad Corbic o Added error message in fr_configure
30* Jul 31, 2000 Nenad Corbic o Fixed the Router UP Time.
31* Apr 28, 2000 Nenad Corbic o Added the option to shutdown an interface
32* when the channel gets disconnected.
33* Apr 28, 2000 Nenad Corbic o Added M.Grants patch: disallow duplicate
34* interface setups.
35* Apr 25, 2000 Nenad Corbic o Added M.Grants patch: dynamically add/remove
36* new dlcis/interfaces.
37* Mar 23, 2000 Nenad Corbic o Improved task queue, bh handling.
38* Mar 16, 2000 Nenad Corbic o Added Inverse ARP support
39* Mar 13, 2000 Nenad Corbic o Added new socket API support.
40* Mar 06, 2000 Nenad Corbic o Bug Fix: corrupted mbox recovery.
41* Feb 24, 2000 Nenad Corbic o Fixed up FT1 UDP debugging problem.
42* Dev 15, 1999 Nenad Corbic o Fixed up header files for 2.0.X kernels
43*
44* Nov 08, 1999 Nenad Corbic o Combined all debug UDP calls into one function
45* o Removed the ARP support. This has to be done
46* in the next version.
47* o Only a Node can implement NO signalling.
48* Initialize DLCI during if_open() if NO
49* signalling.
50* o Took out IPX support, implement in next
51* version
52* Sep 29, 1999 Nenad Corbic o Added SMP support and changed the update
53* function to use timer interrupt.
54* o Fixed the CIR bug: Set the value of BC
55* to CIR when the CIR is enabled.
56* o Updated comments, statistics and tracing.
57* Jun 02, 1999 Gideon Hack o Updated for S514 support.
58* Sep 18, 1998 Jaspreet Singh o Updated for 2.2.X kernels.
59* Jul 31, 1998 Jaspreet Singh o Removed wpf_poll routine. The channel/DLCI
60* status is received through an event interrupt.
61* Jul 08, 1998 David Fong o Added inverse ARP support.
62* Mar 26, 1997 Jaspreet Singh o Returning return codes for failed UDP cmds.
63* Jan 28, 1997 Jaspreet Singh o Improved handling of inactive DLCIs.
64* Dec 30, 1997 Jaspreet Singh o Replaced dev_tint() with mark_bh(NET_BH)
65* Dec 16, 1997 Jaspreet Singh o Implemented Multiple IPX support.
66* Nov 26, 1997 Jaspreet Singh o Improved load sharing with multiple boards
67* o Added Cli() to protect enabling of interrupts
68* while polling is called.
69* Nov 24, 1997 Jaspreet Singh o Added counters to avoid enabling of interrupts
70* when they have been disabled by another
71* interface or routine (eg. wpf_poll).
72* Nov 06, 1997 Jaspreet Singh o Added INTR_TEST_MODE to avoid polling
73* routine disable interrupts during interrupt
74* testing.
75* Oct 20, 1997 Jaspreet Singh o Added hooks in for Router UP time.
76* Oct 16, 1997 Jaspreet Singh o The critical flag is used to maintain flow
77* control by avoiding RACE conditions. The
78* cli() and restore_flags() are taken out.
79* The fr_channel structure is appended for
80* Driver Statistics.
81* Oct 15, 1997 Farhan Thawar o updated if_send() and receive for IPX
82* Aug 29, 1997 Farhan Thawar o Removed most of the cli() and sti()
83* o Abstracted the UDP management stuff
84* o Now use tbusy and critical more intelligently
85* Jul 21, 1997 Jaspreet Singh o Can configure T391, T392, N391, N392 & N393
86* through router.conf.
87* o Protected calls to sdla_peek() by adDing
88* save_flags(), cli() and restore_flags().
89* o Added error message for Inactive DLCIs in
90* fr_event() and update_chan_state().
91* o Fixed freeing up of buffers using kfree()
92* when packets are received.
93* Jul 07, 1997 Jaspreet Singh o Added configurable TTL for UDP packets
94* o Added ability to discard multicast and
95* broadcast source addressed packets
96* Jun 27, 1997 Jaspreet Singh o Added FT1 monitor capabilities
97* New case (0x44) statement in if_send routine
98* Added a global variable rCount to keep track
99* of FT1 status enabled on the board.
100* May 29, 1997 Jaspreet Singh o Fixed major Flow Control Problem
101* With multiple boards a problem was seen where
102* the second board always stopped transmitting
103* packet after running for a while. The code
104* got into a stage where the interrupts were
105* disabled and dev->tbusy was set to 1.
106* This caused the If_send() routine to get into
107* the if clause for it(0,dev->tbusy)
108* forever.
109* The code got into this stage due to an
110* interrupt occurring within the if clause for
111* set_bit(0,dev->tbusy). Since an interrupt
112* disables furhter transmit interrupt and
113* makes dev->tbusy = 0, this effect was undone
114* by making dev->tbusy = 1 in the if clause.
115* The Fix checks to see if Transmit interrupts
116* are disabled then do not make dev->tbusy = 1
117* Introduced a global variable: int_occur and
118* added tx_int_enabled in the wan_device
119* structure.
120* May 21, 1997 Jaspreet Singh o Fixed UDP Management for multiple
121* boards.
122*
123* Apr 25, 1997 Farhan Thawar o added UDP Management stuff
124* o fixed bug in if_send() and tx_intr() to
125* sleep and wakeup all devices
126* Mar 11, 1997 Farhan Thawar Version 3.1.1
127* o fixed (+1) bug in fr508_rx_intr()
128* o changed if_send() to return 0 if
129* wandev.critical() is true
130* o free socket buffer in if_send() if
131* returning 0
132* o added tx_intr() routine
133* Jan 30, 1997 Gene Kozin Version 3.1.0
134* o implemented exec() entry point
135* o fixed a bug causing driver configured as
136* a FR switch to be stuck in WAN_
137* mode
138* Jan 02, 1997 Gene Kozin Initial version.
139*****************************************************************************/
140
141#include <linux/module.h>
142#include <linux/kernel.h> /* printk(), and other useful stuff */
143#include <linux/stddef.h> /* offsetof(), etc. */
144#include <linux/errno.h> /* return codes */
145#include <linux/string.h> /* inline memset(), etc. */
146#include <linux/slab.h> /* kmalloc(), kfree() */
147#include <linux/wanrouter.h> /* WAN router definitions */
148#include <linux/wanpipe.h> /* WANPIPE common user API definitions */
149#include <linux/workqueue.h>
150#include <linux/if_arp.h> /* ARPHRD_* defines */
151#include <asm/byteorder.h> /* htons(), etc. */
152#include <asm/io.h> /* for inb(), outb(), etc. */
153#include <linux/time.h> /* for do_gettimeofday */
154#include <linux/in.h> /* sockaddr_in */
155#include <linux/jiffies.h> /* time_after() macro */
156#include <asm/errno.h>
157
158#include <linux/ip.h>
159#include <linux/if.h>
160
161#include <linux/if_wanpipe_common.h> /* Wanpipe Socket */
162#include <linux/if_wanpipe.h>
163
164#include <linux/sdla_fr.h> /* frame relay firmware API definitions */
165
166#include <asm/uaccess.h>
167#include <linux/inetdevice.h>
168#include <linux/netdevice.h>
169
170#include <net/route.h> /* Dynamic Route Creation */
171#include <linux/etherdevice.h> /* eth_type_trans() used for bridging */
172#include <linux/random.h>
173
174/****** Defines & Macros ****************************************************/
175
176#define MAX_CMD_RETRY 10 /* max number of firmware retries */
177
178#define FR_HEADER_LEN 8 /* max encapsulation header size */
179#define FR_CHANNEL_MTU 1500 /* unfragmented logical channel MTU */
180
181/* Q.922 frame types */
182#define Q922_UI 0x03 /* Unnumbered Info frame */
183#define Q922_XID 0xAF
184
185/* DLCI configured or not */
186#define DLCI_NOT_CONFIGURED 0x00
187#define DLCI_CONFIG_PENDING 0x01
188#define DLCI_CONFIGURED 0x02
189
190/* CIR enabled or not */
191#define CIR_ENABLED 0x00
192#define CIR_DISABLED 0x01
193
194#define FRAME_RELAY_API 1
195#define MAX_BH_BUFF 10
196
197/* For handle_IPXWAN() */
198#define CVHexToAscii(b) (((unsigned char)(b) > (unsigned char)9) ? ((unsigned char)'A' + ((unsigned char)(b) - (unsigned char)10)) : ((unsigned char)'0' + (unsigned char)(b)))
199
200/****** Data Structures *****************************************************/
201
202/* This is an extention of the 'struct device' we create for each network
203 * interface to keep the rest of channel-specific data.
204 */
205typedef struct fr_channel
206{
207 wanpipe_common_t common;
208 char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */
209 unsigned dlci_configured ; /* check whether configured or not */
210 unsigned cir_status; /* check whether CIR enabled or not */
211 unsigned dlci; /* logical channel number */
212 unsigned cir; /* committed information rate */
213 unsigned bc; /* committed burst size */
214 unsigned be; /* excess burst size */
215 unsigned mc; /* multicast support on or off */
216 unsigned tx_int_status; /* Transmit Interrupt Status */
217 unsigned short pkt_length; /* Packet Length */
218 unsigned long router_start_time;/* Router start time in seconds */
219 unsigned long tick_counter; /* counter for transmit time out */
220 char dev_pending_devtint; /* interface pending dev_tint() */
221 void *dlci_int_interface; /* pointer to the DLCI Interface */
222 unsigned long IB_addr; /* physical address of Interface Byte */
223 unsigned long state_tick; /* time of the last state change */
224 unsigned char enable_IPX; /* Enable/Disable the use of IPX */
225 unsigned long network_number; /* Internal Network Number for IPX*/
226 sdla_t *card; /* -> owner */
227 unsigned route_flag; /* Add/Rem dest addr in route tables */
228 unsigned inarp; /* Inverse Arp Request status */
229 long inarp_ready; /* Ready to send requests */
230 int inarp_interval; /* Time between InArp Requests */
231 unsigned long inarp_tick; /* InArp jiffies tick counter */
232 long interface_down; /* Bring interface down on disconnect */
233 struct net_device_stats ifstats; /* interface statistics */
234 if_send_stat_t drvstats_if_send;
235 rx_intr_stat_t drvstats_rx_intr;
236 pipe_mgmt_stat_t drvstats_gen;
237 unsigned long router_up_time;
238
239 unsigned short transmit_length;
240 struct sk_buff *delay_skb;
241
242 bh_data_t *bh_head; /* Circular buffer for chdlc_bh */
243 unsigned long tq_working;
244 volatile int bh_write;
245 volatile int bh_read;
246 atomic_t bh_buff_used;
247
248 /* Polling task queue. Each interface
249 * has its own task queue, which is used
250 * to defer events from the interrupt */
251 struct work_struct fr_poll_work;
252 struct timer_list fr_arp_timer;
253
254 u32 ip_local;
255 u32 ip_remote;
256 long config_dlci;
257 long unconfig_dlci;
258
259 /* Whether this interface should be setup as a gateway.
260 * Used by dynamic route setup code */
261 u8 gateway;
262
263 /* True interface type */
264 u8 true_if_encoding;
265 u8 fr_header[FR_HEADER_LEN];
266 char fr_header_len;
267
268} fr_channel_t;
269
270/* Route Flag options */
271#define NO_ROUTE 0x00
272#define ADD_ROUTE 0x01
273#define ROUTE_ADDED 0x02
274#define REMOVE_ROUTE 0x03
275#define ARP_REQ 0x04
276
277/* inarp options */
278#define INARP_NONE 0x00
279#define INARP_REQUEST 0x01
280#define INARP_CONFIGURED 0x02
281
282/* reasons for enabling the timer interrupt on the adapter */
283#define TMR_INT_ENABLED_UDP 0x01
284#define TMR_INT_ENABLED_UPDATE 0x02
285#define TMR_INT_ENABLED_ARP 0x04
286#define TMR_INT_ENABLED_UPDATE_STATE 0x08
287#define TMR_INT_ENABLED_CONFIG 0x10
288#define TMR_INT_ENABLED_UNCONFIG 0x20
289
290
291typedef struct dlci_status
292{
293 unsigned short dlci PACKED;
294 unsigned char state PACKED;
295} dlci_status_t;
296
297typedef struct dlci_IB_mapping
298{
299 unsigned short dlci PACKED;
300 unsigned long addr_value PACKED;
301} dlci_IB_mapping_t;
302
303/* This structure is used for DLCI list Tx interrupt mode. It is used to
304 enable interrupt bit and set the packet length for transmission
305 */
306typedef struct fr_dlci_interface
307{
308 unsigned char gen_interrupt PACKED;
309 unsigned short packet_length PACKED;
310 unsigned char reserved PACKED;
311} fr_dlci_interface_t;
312
313/* variable for keeping track of enabling/disabling FT1 monitor status */
314static int rCount = 0;
315
316extern void disable_irq(unsigned int);
317extern void enable_irq(unsigned int);
318
319/* variable for keeping track of number of interrupts generated during
320 * interrupt test routine
321 */
322static int Intr_test_counter;
323
324/****** Function Prototypes *************************************************/
325
326/* WAN link driver entry points. These are called by the WAN router module. */
327static int update(struct wan_device *wandev);
328static int new_if(struct wan_device *wandev, struct net_device *dev,
329 wanif_conf_t *conf);
330static int del_if(struct wan_device *wandev, struct net_device *dev);
331static void disable_comm (sdla_t *card);
332
333/* WANPIPE-specific entry points */
334static int wpf_exec(struct sdla *card, void *u_cmd, void *u_data);
335
336/* Network device interface */
337static int if_init(struct net_device *dev);
338static int if_open(struct net_device *dev);
339static int if_close(struct net_device *dev);
340
341static void if_tx_timeout(struct net_device *dev);
342
343static int if_rebuild_hdr (struct sk_buff *skb);
344
345static int if_send(struct sk_buff *skb, struct net_device *dev);
346static int chk_bcast_mcast_addr(sdla_t *card, struct net_device* dev,
347 struct sk_buff *skb);
348static struct net_device_stats *if_stats(struct net_device *dev);
349
350/* Interrupt handlers */
351static void fr_isr(sdla_t *card);
352static void rx_intr(sdla_t *card);
353static void tx_intr(sdla_t *card);
354static void timer_intr(sdla_t *card);
355static void spur_intr(sdla_t *card);
356
357/* Frame relay firmware interface functions */
358static int fr_read_version(sdla_t *card, char *str);
359static int fr_configure(sdla_t *card, fr_conf_t *conf);
360static int fr_dlci_configure(sdla_t *card, fr_dlc_conf_t *conf, unsigned dlci);
361static int fr_init_dlci (sdla_t *card, fr_channel_t *chan);
362static int fr_set_intr_mode (sdla_t *card, unsigned mode, unsigned mtu, unsigned short timeout);
363static int fr_comm_enable(sdla_t *card);
364static void fr_comm_disable(sdla_t *card);
365static int fr_get_err_stats(sdla_t *card);
366static int fr_get_stats(sdla_t *card);
367static int fr_add_dlci(sdla_t *card, int dlci);
368static int fr_activate_dlci(sdla_t *card, int dlci);
369static int fr_delete_dlci (sdla_t* card, int dlci);
370static int fr_issue_isf(sdla_t *card, int isf);
371static int fr_send(sdla_t *card, int dlci, unsigned char attr, int len,
372 void *buf);
373static int fr_send_data_header(sdla_t *card, int dlci, unsigned char attr, int len,
374 void *buf,unsigned char hdr_len);
375static unsigned int fr_send_hdr(sdla_t *card, int dlci, unsigned int offset);
376
377static int check_dlci_config (sdla_t *card, fr_channel_t *chan);
378static void initialize_rx_tx_buffers (sdla_t *card);
379
380
381/* Firmware asynchronous event handlers */
382static int fr_event(sdla_t *card, int event, fr_mbox_t *mbox);
383static int fr_modem_failure(sdla_t *card, fr_mbox_t *mbox);
384static int fr_dlci_change(sdla_t *card, fr_mbox_t *mbox);
385
386/* Miscellaneous functions */
387static int update_chan_state(struct net_device *dev);
388static void set_chan_state(struct net_device *dev, int state);
389static struct net_device *find_channel(sdla_t *card, unsigned dlci);
390static int is_tx_ready(sdla_t *card, fr_channel_t *chan);
391static unsigned int dec_to_uint(unsigned char *str, int len);
392static int reply_udp( unsigned char *data, unsigned int mbox_len );
393
394static int intr_test( sdla_t* card );
395static void init_chan_statistics( fr_channel_t* chan );
396static void init_global_statistics( sdla_t* card );
397static void read_DLCI_IB_mapping( sdla_t* card, fr_channel_t* chan );
398static int setup_for_delayed_transmit(struct net_device* dev,
399 struct sk_buff *skb);
400
401struct net_device *move_dev_to_next(sdla_t *card, struct net_device *dev);
402static int check_tx_status(sdla_t *card, struct net_device *dev);
403
404/* Frame Relay Socket API */
405static void trigger_fr_bh (fr_channel_t *);
406static void fr_bh(struct net_device *dev);
407static int fr_bh_cleanup(struct net_device *dev);
408static int bh_enqueue(struct net_device *dev, struct sk_buff *skb);
409
410static void trigger_fr_poll(struct net_device *dev);
411static void fr_poll(struct net_device *dev);
412//static void add_gateway(struct net_device *dev);
413
414static void trigger_unconfig_fr(struct net_device *dev);
415static void unconfig_fr (sdla_t *);
416
417static void trigger_config_fr (sdla_t *);
418static void config_fr (sdla_t *);
419
420
421/* Inverse ARP and Dynamic routing functions */
422int process_ARP(arphdr_1490_t *ArpPacket, sdla_t *card, struct net_device *dev);
423int is_arp(void *buf);
424int send_inarp_request(sdla_t *card, struct net_device *dev);
425
426static void trigger_fr_arp(struct net_device *dev);
427static void fr_arp (unsigned long data);
428
429
430/* Udp management functions */
431static int process_udp_mgmt_pkt(sdla_t *card);
432static int udp_pkt_type( struct sk_buff *skb, sdla_t *card );
433static int store_udp_mgmt_pkt(int udp_type, char udp_pkt_src, sdla_t* card,
434 struct sk_buff *skb, int dlci);
435
436/* IPX functions */
437static void switch_net_numbers(unsigned char *sendpacket,
438 unsigned long network_number, unsigned char incoming);
439
440static int handle_IPXWAN(unsigned char *sendpacket, char *devname,
441 unsigned char enable_IPX, unsigned long network_number);
442
443/* Lock Functions: SMP supported */
444void s508_s514_unlock(sdla_t *card, unsigned long *smp_flags);
445void s508_s514_lock(sdla_t *card, unsigned long *smp_flags);
446
447unsigned short calc_checksum (char *, int);
448static int setup_fr_header(struct sk_buff *skb,
449 struct net_device* dev, char op_mode);
450
451
452/****** Public Functions ****************************************************/
453
454/*============================================================================
455 * Frame relay protocol initialization routine.
456 *
457 * This routine is called by the main WANPIPE module during setup. At this
458 * point adapter is completely initialized and firmware is running.
459 * o read firmware version (to make sure it's alive)
460 * o configure adapter
461 * o initialize protocol-specific fields of the adapter data space.
462 *
463 * Return: 0 o.k.
464 * < 0 failure.
465 */
466int wpf_init(sdla_t *card, wandev_conf_t *conf)
467{
468
469 int err;
470 fr508_flags_t* flags;
471
472 union
473 {
474 char str[80];
475 fr_conf_t cfg;
476 } u;
477
478 fr_buf_info_t* buf_info;
479 int i;
480
481
482 printk(KERN_INFO "\n");
483
484 /* Verify configuration ID */
485 if (conf->config_id != WANCONFIG_FR) {
486
487 printk(KERN_INFO "%s: invalid configuration ID %u!\n",
488 card->devname, conf->config_id);
489 return -EINVAL;
490
491 }
492
493 /* Initialize protocol-specific fields of adapter data space */
494 switch (card->hw.fwid) {
495
496 case SFID_FR508:
497 card->mbox = (void*)(card->hw.dpmbase +
498 FR508_MBOX_OFFS);
499 card->flags = (void*)(card->hw.dpmbase +
500 FR508_FLAG_OFFS);
501 if(card->hw.type == SDLA_S514) {
502 card->mbox += FR_MB_VECTOR;
503 card->flags += FR_MB_VECTOR;
504 }
505 card->isr = &fr_isr;
506 break;
507
508 default:
509 return -EINVAL;
510 }
511
512 flags = card->flags;
513
514 /* Read firmware version. Note that when adapter initializes, it
515 * clears the mailbox, so it may appear that the first command was
516 * executed successfully when in fact it was merely erased. To work
517 * around this, we execute the first command twice.
518 */
519
520 if (fr_read_version(card, NULL) || fr_read_version(card, u.str))
521 return -EIO;
522
523 printk(KERN_INFO "%s: running frame relay firmware v%s\n",
524 card->devname, u.str);
525
526 /* Adjust configuration */
527 conf->mtu += FR_HEADER_LEN;
528 conf->mtu = (conf->mtu >= MIN_LGTH_FR_DATA_CFG) ?
529 min_t(unsigned int, conf->mtu, FR_MAX_NO_DATA_BYTES_IN_FRAME) :
530 FR_CHANNEL_MTU + FR_HEADER_LEN;
531
532 conf->bps = min_t(unsigned int, conf->bps, 2048000);
533
534 /* Initialze the configuration structure sent to the board to zero */
535 memset(&u.cfg, 0, sizeof(u.cfg));
536
537 memset(card->u.f.dlci_to_dev_map, 0, sizeof(card->u.f.dlci_to_dev_map));
538
539 /* Configure adapter firmware */
540
541 u.cfg.mtu = conf->mtu;
542 u.cfg.kbps = conf->bps / 1000;
543
544 u.cfg.cir_fwd = u.cfg.cir_bwd = 16;
545 u.cfg.bc_fwd = u.cfg.bc_bwd = 16;
546
547 u.cfg.options = 0x0000;
548 printk(KERN_INFO "%s: Global CIR enabled by Default\n", card->devname);
549
550 switch (conf->u.fr.signalling) {
551
552 case WANOPT_FR_ANSI:
553 u.cfg.options = 0x0000;
554 break;
555
556 case WANOPT_FR_Q933:
557 u.cfg.options |= 0x0200;
558 break;
559
560 case WANOPT_FR_LMI:
561 u.cfg.options |= 0x0400;
562 break;
563
564 case WANOPT_NO:
565 u.cfg.options |= 0x0800;
566 break;
567 default:
568 printk(KERN_INFO "%s: Illegal Signalling option\n",
569 card->wandev.name);
570 return -EINVAL;
571 }
572
573
574 card->wandev.signalling = conf->u.fr.signalling;
575
576 if (conf->station == WANOPT_CPE) {
577
578
579 if (conf->u.fr.signalling == WANOPT_NO){
580 printk(KERN_INFO
581 "%s: ERROR - For NO signalling, station must be set to Node!",
582 card->devname);
583 return -EINVAL;
584 }
585
586 u.cfg.station = 0;
587 u.cfg.options |= 0x8000; /* auto config DLCI */
588 card->u.f.dlci_num = 0;
589
590 } else {
591
592 u.cfg.station = 1; /* switch emulation mode */
593
594 /* For switch emulation we have to create a list of dlci(s)
595 * that will be sent to be global SET_DLCI_CONFIGURATION
596 * command in fr_configure() routine.
597 */
598
599 card->u.f.dlci_num = min_t(unsigned int, max_t(unsigned int, conf->u.fr.dlci_num, 1), 100);
600
601 for ( i = 0; i < card->u.f.dlci_num; i++) {
602
603 card->u.f.node_dlci[i] = (unsigned short)
604 conf->u.fr.dlci[i] ? conf->u.fr.dlci[i] : 16;
605
606 }
607 }
608
609 if (conf->clocking == WANOPT_INTERNAL)
610 u.cfg.port |= 0x0001;
611
612 if (conf->interface == WANOPT_RS232)
613 u.cfg.port |= 0x0002;
614
615 if (conf->u.fr.t391)
616 u.cfg.t391 = min_t(unsigned int, conf->u.fr.t391, 30);
617 else
618 u.cfg.t391 = 5;
619
620 if (conf->u.fr.t392)
621 u.cfg.t392 = min_t(unsigned int, conf->u.fr.t392, 30);
622 else
623 u.cfg.t392 = 15;
624
625 if (conf->u.fr.n391)
626 u.cfg.n391 = min_t(unsigned int, conf->u.fr.n391, 255);
627 else
628 u.cfg.n391 = 2;
629
630 if (conf->u.fr.n392)
631 u.cfg.n392 = min_t(unsigned int, conf->u.fr.n392, 10);
632 else
633 u.cfg.n392 = 3;
634
635 if (conf->u.fr.n393)
636 u.cfg.n393 = min_t(unsigned int, conf->u.fr.n393, 10);
637 else
638 u.cfg.n393 = 4;
639
640 if (fr_configure(card, &u.cfg))
641 return -EIO;
642
643 if (card->hw.type == SDLA_S514) {
644
645 buf_info = (void*)(card->hw.dpmbase + FR_MB_VECTOR +
646 FR508_RXBC_OFFS);
647
648 card->rxmb = (void*)(buf_info->rse_next + card->hw.dpmbase);
649
650 card->u.f.rxmb_base =
651 (void*)(buf_info->rse_base + card->hw.dpmbase);
652
653 card->u.f.rxmb_last =
654 (void*)(buf_info->rse_base +
655 (buf_info->rse_num - 1) * sizeof(fr_rx_buf_ctl_t) +
656 card->hw.dpmbase);
657 }else{
658 buf_info = (void*)(card->hw.dpmbase + FR508_RXBC_OFFS);
659
660 card->rxmb = (void*)(buf_info->rse_next -
661 FR_MB_VECTOR + card->hw.dpmbase);
662
663 card->u.f.rxmb_base =
664 (void*)(buf_info->rse_base -
665 FR_MB_VECTOR + card->hw.dpmbase);
666
667 card->u.f.rxmb_last =
668 (void*)(buf_info->rse_base +
669 (buf_info->rse_num - 1) * sizeof(fr_rx_buf_ctl_t) -
670 FR_MB_VECTOR + card->hw.dpmbase);
671 }
672
673 card->u.f.rx_base = buf_info->buf_base;
674 card->u.f.rx_top = buf_info->buf_top;
675
676 card->u.f.tx_interrupts_pending = 0;
677
678 card->wandev.mtu = conf->mtu;
679 card->wandev.bps = conf->bps;
680 card->wandev.interface = conf->interface;
681 card->wandev.clocking = conf->clocking;
682 card->wandev.station = conf->station;
683 card->poll = NULL;
684 card->exec = &wpf_exec;
685 card->wandev.update = &update;
686 card->wandev.new_if = &new_if;
687 card->wandev.del_if = &del_if;
688 card->wandev.state = WAN_DISCONNECTED;
689 card->wandev.ttl = conf->ttl;
690 card->wandev.udp_port = conf->udp_port;
691 card->disable_comm = &disable_comm;
692 card->u.f.arp_dev = NULL;
693
694 /* Intialize global statistics for a card */
695 init_global_statistics( card );
696
697 card->TracingEnabled = 0;
698
699 /* Interrupt Test */
700 Intr_test_counter = 0;
701 card->intr_mode = INTR_TEST_MODE;
702 err = intr_test( card );
703
704 printk(KERN_INFO "%s: End of Interrupt Test rc=0x%x count=%i\n",
705 card->devname,err,Intr_test_counter);
706
707 if (err || (Intr_test_counter < MAX_INTR_TEST_COUNTER)) {
708 printk(KERN_ERR "%s: Interrupt Test Failed, Counter: %i\n",
709 card->devname, Intr_test_counter);
710 printk(KERN_ERR "Please choose another interrupt\n");
711 err = -EIO;
712 return err;
713 }
714
715 printk(KERN_INFO "%s: Interrupt Test Passed, Counter: %i\n",
716 card->devname, Intr_test_counter);
717
718
719 /* Apr 28 2000. Nenad Corbic
720 * Enable commnunications here, not in if_open or new_if, since
721 * interfaces come down when the link is disconnected.
722 */
723
724 /* If you enable comms and then set ints, you get a Tx int as you
725 * perform the SET_INT_TRIGGERS command. So, we only set int
726 * triggers and then adjust the interrupt mask (to disable Tx ints)
727 * before enabling comms.
728 */
729 if (fr_set_intr_mode(card, (FR_INTR_RXRDY | FR_INTR_TXRDY |
730 FR_INTR_DLC | FR_INTR_TIMER | FR_INTR_TX_MULT_DLCIs) ,
731 card->wandev.mtu, 0)) {
732 return -EIO;
733 }
734
735 flags->imask &= ~(FR_INTR_TXRDY | FR_INTR_TIMER);
736
737 if (fr_comm_enable(card)) {
738 return -EIO;
739 }
740 wanpipe_set_state(card, WAN_CONNECTED);
741 spin_lock_init(&card->u.f.if_send_lock);
742
743 printk(KERN_INFO "\n");
744
745 return 0;
746}
747
748/******* WAN Device Driver Entry Points *************************************/
749
750/*============================================================================
751 * Update device status & statistics.
752 */
753static int update(struct wan_device* wandev)
754{
755 volatile sdla_t* card;
756 unsigned long timeout;
757 fr508_flags_t* flags;
758
759 /* sanity checks */
760 if ((wandev == NULL) || (wandev->private == NULL))
761 return -EFAULT;
762
763 if (wandev->state == WAN_UNCONFIGURED)
764 return -ENODEV;
765
766 card = wandev->private;
767 flags = card->flags;
768
769
770 card->u.f.update_comms_stats = 1;
771 card->u.f.timer_int_enabled |= TMR_INT_ENABLED_UPDATE;
772 flags->imask |= FR_INTR_TIMER;
773 timeout = jiffies;
774 for(;;) {
775 if(card->u.f.update_comms_stats == 0)
776 break;
777 if (time_after(jiffies, timeout + 1 * HZ)){
778 card->u.f.update_comms_stats = 0;
779 return -EAGAIN;
780 }
781 }
782
783 return 0;
784}
785
786/*============================================================================
787 * Create new logical channel.
788 * This routine is called by the router when ROUTER_IFNEW IOCTL is being
789 * handled.
790 * o parse media- and hardware-specific configuration
791 * o make sure that a new channel can be created
792 * o allocate resources, if necessary
793 * o prepare network device structure for registaration.
794 *
795 * Return: 0 o.k.
796 * < 0 failure (channel will not be created)
797 */
798static int new_if(struct wan_device* wandev, struct net_device* dev,
799 wanif_conf_t* conf)
800{
801 sdla_t* card = wandev->private;
802 fr_channel_t* chan;
803 int dlci = 0;
804 int err = 0;
805
806
807 if ((conf->name[0] == '\0') || (strlen(conf->name) > WAN_IFNAME_SZ)) {
808
809 printk(KERN_INFO "%s: Invalid interface name!\n",
810 card->devname);
811 return -EINVAL;
812 }
813
814 /* allocate and initialize private data */
815 chan = kmalloc(sizeof(fr_channel_t), GFP_KERNEL);
816
817 if (chan == NULL)
818 return -ENOMEM;
819
820 memset(chan, 0, sizeof(fr_channel_t));
821 strcpy(chan->name, conf->name);
822 chan->card = card;
823
824 /* verify media address */
825 if (isdigit(conf->addr[0])) {
826
827 dlci = dec_to_uint(conf->addr, 0);
828
829 if (dlci && (dlci <= HIGHEST_VALID_DLCI)) {
830
831 chan->dlci = dlci;
832
833 } else {
834
835 printk(KERN_ERR
836 "%s: Invalid DLCI %u on interface %s!\n",
837 wandev->name, dlci, chan->name);
838 err = -EINVAL;
839 }
840
841 } else {
842 printk(KERN_ERR
843 "%s: Invalid media address on interface %s!\n",
844 wandev->name, chan->name);
845 err = -EINVAL;
846 }
847
848 if ((chan->true_if_encoding = conf->true_if_encoding) == WANOPT_YES){
849 printk(KERN_INFO
850 "%s: Enabling, true interface type encoding.\n",
851 card->devname);
852 }
853
854
855
856 /* Setup wanpipe as a router (WANPIPE) even if it is
857 * a bridged DLCI, or as an API
858 */
859 if (strcmp(conf->usedby, "WANPIPE") == 0 ||
860 strcmp(conf->usedby, "BRIDGE") == 0 ||
861 strcmp(conf->usedby, "BRIDGE_N") == 0){
862
863 if(strcmp(conf->usedby, "WANPIPE") == 0){
864 chan->common.usedby = WANPIPE;
865
866 printk(KERN_INFO "%s: Running in WANPIPE mode.\n",
867 card->devname);
868
869 }else if(strcmp(conf->usedby, "BRIDGE") == 0){
870
871 chan->common.usedby = BRIDGE;
872
873 printk(KERN_INFO "%s: Running in WANPIPE (BRIDGE) mode.\n",
874 card->devname);
875 }else if( strcmp(conf->usedby, "BRIDGE_N") == 0 ){
876
877 chan->common.usedby = BRIDGE_NODE;
878
879 printk(KERN_INFO "%s: Running in WANPIPE (BRIDGE_NODE) mode.\n",
880 card->devname);
881 }
882
883 if (!err){
884 /* Dynamic interface configuration option.
885 * On disconnect, if the options is selected,
886 * the interface will be brought down */
887 if (conf->if_down == WANOPT_YES){
888 set_bit(DYN_OPT_ON,&chan->interface_down);
889 printk(KERN_INFO
890 "%s: Dynamic interface configuration enabled.\n",
891 card->devname);
892 }
893 }
894
895 } else if(strcmp(conf->usedby, "API") == 0){
896
897 chan->common.usedby = API;
898 printk(KERN_INFO "%s: Running in API mode.\n",
899 wandev->name);
900 }
901
902 if (err) {
903
904 kfree(chan);
905 return err;
906 }
907
908 /* place cir,be,bc and other channel specific information into the
909 * chan structure
910 */
911 if (conf->cir) {
912
913 chan->cir = max_t(unsigned int, 1,
914 min_t(unsigned int, conf->cir, 512));
915 chan->cir_status = CIR_ENABLED;
916
917
918 /* If CIR is enabled, force BC to equal CIR
919 * this solves number of potential problems if CIR is
920 * set and BC is not
921 */
922 chan->bc = chan->cir;
923
924 if (conf->be){
925 chan->be = max_t(unsigned int,
926 0, min_t(unsigned int, conf->be, 511));
927 }else{
928 conf->be = 0;
929 }
930
931 printk (KERN_INFO "%s: CIR enabled for DLCI %i \n",
932 wandev->name,chan->dlci);
933 printk (KERN_INFO "%s: CIR = %i ; BC = %i ; BE = %i\n",
934 wandev->name,chan->cir,chan->bc,chan->be);
935
936
937 }else{
938 chan->cir_status = CIR_DISABLED;
939 printk (KERN_INFO "%s: CIR disabled for DLCI %i\n",
940 wandev->name,chan->dlci);
941 }
942
943 chan->mc = conf->mc;
944
945 if (conf->inarp == WANOPT_YES){
946 printk(KERN_INFO "%s: Inverse ARP Support Enabled\n",card->devname);
947 chan->inarp = conf->inarp ? INARP_REQUEST : INARP_NONE;
948 chan->inarp_interval = conf->inarp_interval ? conf->inarp_interval : 10;
949 }else{
950 printk(KERN_INFO "%s: Inverse ARP Support Disabled\n",card->devname);
951 chan->inarp = INARP_NONE;
952 chan->inarp_interval = 10;
953 }
954
955
956 chan->dlci_configured = DLCI_NOT_CONFIGURED;
957
958
959 /*FIXME: IPX disabled in this WANPIPE version */
960 if (conf->enable_IPX == WANOPT_YES){
961 printk(KERN_INFO "%s: ERROR - This version of WANPIPE doesn't support IPX\n",
962 card->devname);
963 kfree(chan);
964 return -EINVAL;
965 }else{
966 chan->enable_IPX = WANOPT_NO;
967 }
968
969 if (conf->network_number){
970 chan->network_number = conf->network_number;
971 }else{
972 chan->network_number = 0xDEADBEEF;
973 }
974
975 chan->route_flag = NO_ROUTE;
976
977 init_chan_statistics(chan);
978
979 chan->transmit_length = 0;
980
981 /* prepare network device data space for registration */
982 strcpy(dev->name,chan->name);
983
984 dev->init = &if_init;
985 dev->priv = chan;
986
987 /* Initialize FR Polling Task Queue
988 * We need a poll routine for each network
989 * interface.
990 */
991 INIT_WORK(&chan->fr_poll_work, (void *)fr_poll, dev);
992
993 init_timer(&chan->fr_arp_timer);
994 chan->fr_arp_timer.data=(unsigned long)dev;
995 chan->fr_arp_timer.function = fr_arp;
996
997 wandev->new_if_cnt++;
998
999 /* Tells us that if this interface is a
1000 * gateway or not */
1001 if ((chan->gateway = conf->gateway) == WANOPT_YES){
1002 printk(KERN_INFO "%s: Interface %s is set as a gateway.\n",
1003 card->devname,dev->name);
1004 }
1005
1006 /* M. Grant Patch Apr 28 2000
1007 * Disallow duplicate dlci configurations. */
1008 if (card->u.f.dlci_to_dev_map[chan->dlci] != NULL) {
1009 kfree(chan);
1010 return -EBUSY;
1011 }
1012
1013 /* Configure this dlci at a later date, when
1014 * the interface comes up. i.e. when if_open()
1015 * executes */
1016 set_bit(0,&chan->config_dlci);
1017
1018 printk(KERN_INFO "\n");
1019
1020 return 0;
1021}
1022
1023/*============================================================================
1024 * Delete logical channel.
1025 */
1026static int del_if(struct wan_device* wandev, struct net_device* dev)
1027{
1028 fr_channel_t* chan = dev->priv;
1029 unsigned long smp_flags=0;
1030
1031 /* This interface is dead, make sure the
1032 * ARP timer is stopped */
1033 del_timer(&chan->fr_arp_timer);
1034
1035 /* If we are a NODE, we must unconfigure this DLCI
1036 * Trigger an unconfigure command that will
1037 * be executed in timer interrupt. We must wait
1038 * for the command to complete. */
1039 trigger_unconfig_fr(dev);
1040
1041 lock_adapter_irq(&wandev->lock, &smp_flags);
1042 wandev->new_if_cnt--;
1043 unlock_adapter_irq(&wandev->lock, &smp_flags);
1044
1045 return 0;
1046}
1047
1048
1049/*=====================================================================
1050 * disable_comm
1051 *
1052 * Description:
1053 * Disable communications.
1054 * This code runs in shutdown (sdlamain.c)
1055 * under critical flag. Therefore it is not
1056 * necessary to set a critical flag here
1057 *
1058 * Usage:
1059 * Commnunications are disabled only on a card
1060 * shutdown.
1061 */
1062
1063static void disable_comm (sdla_t *card)
1064{
1065 printk(KERN_INFO "%s: Disabling Communications!\n",
1066 card->devname);
1067 fr_comm_disable(card);
1068}
1069
1070/****** WANPIPE-specific entry points ***************************************/
1071
1072/*============================================================================
1073 * Execute adapter interface command.
1074 */
1075static int wpf_exec (struct sdla* card, void* u_cmd, void* u_data)
1076{
1077 fr_mbox_t* mbox = card->mbox;
1078 int retry = MAX_CMD_RETRY;
1079 int err, len;
1080 fr_cmd_t cmd;
1081
1082 if(copy_from_user((void*)&cmd, u_cmd, sizeof(cmd)))
1083 return -EFAULT;
1084
1085 /* execute command */
1086 do
1087 {
1088 memcpy(&mbox->cmd, &cmd, sizeof(cmd));
1089
1090 if (cmd.length){
1091 if( copy_from_user((void*)&mbox->data, u_data, cmd.length))
1092 return -EFAULT;
1093 }
1094
1095 if (sdla_exec(mbox))
1096 err = mbox->cmd.result;
1097
1098 else return -EIO;
1099
1100 } while (err && retry-- && fr_event(card, err, mbox));
1101
1102 /* return result */
1103 if (copy_to_user(u_cmd, (void*)&mbox->cmd, sizeof(fr_cmd_t)))
1104 return -EFAULT;
1105
1106 len = mbox->cmd.length;
1107
1108 if (len && u_data && !copy_to_user(u_data, (void*)&mbox->data, len))
1109 return -EFAULT;
1110 return 0;
1111}
1112
1113/****** Network Device Interface ********************************************/
1114
1115/*============================================================================
1116 * Initialize Linux network interface.
1117 *
1118 * This routine is called only once for each interface, during Linux network
1119 * interface registration. Returning anything but zero will fail interface
1120 * registration.
1121 */
1122static int if_init(struct net_device* dev)
1123{
1124 fr_channel_t* chan = dev->priv;
1125 sdla_t* card = chan->card;
1126 struct wan_device* wandev = &card->wandev;
1127
1128 /* Initialize device driver entry points */
1129 dev->open = &if_open;
1130 dev->stop = &if_close;
1131 dev->hard_header = NULL;
1132 dev->rebuild_header = &if_rebuild_hdr;
1133 dev->hard_start_xmit = &if_send;
1134 dev->get_stats = &if_stats;
1135 dev->tx_timeout = &if_tx_timeout;
1136 dev->watchdog_timeo = TX_TIMEOUT;
1137
1138 if (chan->common.usedby == WANPIPE || chan->common.usedby == API){
1139
1140 /* Initialize media-specific parameters */
1141 if (chan->true_if_encoding){
1142 dev->type = ARPHRD_DLCI; /* This breaks tcpdump */
1143 }else{
1144 dev->type = ARPHRD_PPP; /* ARP h/w type */
1145 }
1146
1147 dev->flags |= IFF_POINTOPOINT;
1148 dev->flags |= IFF_NOARP;
1149
1150 /* Enable Multicast addressing */
1151 if (chan->mc == WANOPT_YES){
1152 dev->flags |= IFF_MULTICAST;
1153 }
1154
1155 dev->mtu = wandev->mtu - FR_HEADER_LEN;
1156 /* For an API, the maximum number of bytes that the stack will pass
1157 to the driver is (dev->mtu + dev->hard_header_len). So, adjust the
1158 mtu so that a frame of maximum size can be transmitted by the API.
1159 */
1160 if(chan->common.usedby == API) {
1161 dev->mtu += (sizeof(api_tx_hdr_t) - FR_HEADER_LEN);
1162 }
1163
1164 dev->hard_header_len = FR_HEADER_LEN;/* media header length */
1165 dev->addr_len = 2; /* hardware address length */
1166 *(unsigned short*)dev->dev_addr = htons(chan->dlci);
1167
1168 /* Set transmit buffer queue length */
1169 dev->tx_queue_len = 100;
1170
1171 }else{
1172
1173 /* Setup the interface for Bridging */
1174 int hw_addr=0;
1175 ether_setup(dev);
1176
1177 /* Use a random number to generate the MAC address */
1178 memcpy(dev->dev_addr, "\xFE\xFC\x00\x00\x00\x00", 6);
1179 get_random_bytes(&hw_addr, sizeof(hw_addr));
1180 *(int *)(dev->dev_addr + 2) += hw_addr;
1181 }
1182
1183 /* Initialize hardware parameters (just for reference) */
1184 dev->irq = wandev->irq;
1185 dev->dma = wandev->dma;
1186 dev->base_addr = wandev->ioport;
1187 dev->mem_start = wandev->maddr;
1188 dev->mem_end = wandev->maddr + wandev->msize - 1;
1189 SET_MODULE_OWNER(dev);
1190
1191 return 0;
1192}
1193
1194/*============================================================================
1195 * Open network interface.
1196 * o if this is the first open, then enable communications and interrupts.
1197 * o prevent module from unloading by incrementing use count
1198 *
1199 * Return 0 if O.k. or errno.
1200 */
1201static int if_open(struct net_device* dev)
1202{
1203 fr_channel_t* chan = dev->priv;
1204 sdla_t* card = chan->card;
1205 int err = 0;
1206 struct timeval tv;
1207
1208 if (netif_running(dev))
1209 return -EBUSY;
1210
1211 /* Initialize the task queue */
1212 chan->tq_working=0;
1213
1214 INIT_WORK(&chan->common.wanpipe_work, (void *)fr_bh, dev);
1215
1216 /* Allocate and initialize BH circular buffer */
1217 chan->bh_head = kmalloc((sizeof(bh_data_t)*MAX_BH_BUFF),GFP_ATOMIC);
1218 memset(chan->bh_head,0,(sizeof(bh_data_t)*MAX_BH_BUFF));
1219 atomic_set(&chan->bh_buff_used, 0);
1220
1221 netif_start_queue(dev);
1222
1223 wanpipe_open(card);
1224 do_gettimeofday( &tv );
1225 chan->router_start_time = tv.tv_sec;
1226
1227 if (test_bit(0,&chan->config_dlci)){
1228 trigger_config_fr (card);
1229 }else if (chan->inarp == INARP_REQUEST){
1230 trigger_fr_arp(dev);
1231 }
1232
1233 return err;
1234}
1235
1236/*============================================================================
1237 * Close network interface.
1238 * o if this is the last open, then disable communications and interrupts.
1239 * o reset flags.
1240 */
1241static int if_close(struct net_device* dev)
1242{
1243 fr_channel_t* chan = dev->priv;
1244 sdla_t* card = chan->card;
1245
1246 if (chan->inarp == INARP_CONFIGURED) {
1247 chan->inarp = INARP_REQUEST;
1248 }
1249
1250 netif_stop_queue(dev);
1251 wanpipe_close(card);
1252
1253 return 0;
1254}
1255
1256/*============================================================================
1257 * Re-build media header.
1258 *
1259 * Return: 1 physical address resolved.
1260 * 0 physical address not resolved
1261 */
1262static int if_rebuild_hdr (struct sk_buff* skb)
1263{
1264 struct net_device *dev = skb->dev;
1265 fr_channel_t* chan = dev->priv;
1266 sdla_t* card = chan->card;
1267
1268 printk(KERN_INFO "%s: rebuild_header() called for interface %s!\n",
1269 card->devname, dev->name);
1270 return 1;
1271}
1272
1273/*============================================================================
1274 * Handle transmit timeout event from netif watchdog
1275 */
1276static void if_tx_timeout(struct net_device *dev)
1277{
1278 fr_channel_t* chan = dev->priv;
1279 sdla_t *card = chan->card;
1280
1281 /* If our device stays busy for at least 5 seconds then we will
1282 * kick start the device by making dev->tbusy = 0. We expect
1283 * that our device never stays busy more than 5 seconds. So this
1284 * is only used as a last resort.
1285 */
1286
1287 chan->drvstats_if_send.if_send_tbusy++;
1288 ++chan->ifstats.collisions;
1289
1290 printk (KERN_INFO "%s: Transmit timed out on %s\n",
1291 card->devname, dev->name);
1292 chan->drvstats_if_send.if_send_tbusy_timeout++;
1293 netif_wake_queue (dev);
1294
1295}
1296
1297
1298/*============================================================================
1299 * Send a packet on a network interface.
1300 * o set tbusy flag (marks start of the transmission) to block a timer-based
1301 * transmit from overlapping.
1302 * o set critical flag when accessing board.
1303 * o check link state. If link is not up, then drop the packet.
1304 * o check channel status. If it's down then initiate a call.
1305 * o pass a packet to corresponding WAN device.
1306 * o free socket buffer
1307 *
1308 * Return: 0 complete (socket buffer must be freed)
1309 * non-0 packet may be re-transmitted (tbusy must be set)
1310 *
1311 * Notes:
1312 * 1. This routine is called either by the protocol stack or by the "net
1313 * bottom half" (with interrupts enabled).
1314 *
1315 * 2. Using netif_start_queue() and netif_stop_queue()
1316 * will inhibit further transmit requests from the protocol stack
1317 * and can be used for flow control with protocol layer.
1318 */
1319static int if_send(struct sk_buff* skb, struct net_device* dev)
1320{
1321 fr_channel_t* chan = dev->priv;
1322 sdla_t* card = chan->card;
1323 int err;
1324 unsigned char *sendpacket;
1325 fr508_flags_t* adptr_flags = card->flags;
1326 int udp_type;
1327 long delay_tx_queued = 0;
1328 unsigned long smp_flags=0;
1329 unsigned char attr = 0;
1330
1331 chan->drvstats_if_send.if_send_entry++;
1332
1333 netif_stop_queue(dev);
1334
1335 if (skb == NULL) {
1336 /* if we get here, some higher layer thinks we've missed an
1337 * tx-done interrupt.
1338 */
1339 printk(KERN_INFO "%s: interface %s got kicked!\n",
1340 card->devname, dev->name);
1341 chan->drvstats_if_send.if_send_skb_null ++;
1342
1343 netif_wake_queue(dev);
1344 return 0;
1345 }
1346
1347 /* If a peripheral task is running just drop packets */
1348 if (test_bit(PERI_CRIT, &card->wandev.critical)){
1349
1350 printk(KERN_INFO "%s: Critical in if_send(): Peripheral running!\n",
1351 card->devname);
1352
1353 dev_kfree_skb_any(skb);
1354 netif_start_queue(dev);
1355 return 0;
1356 }
1357
1358 /* We must set the 'tbusy' flag if we already have a packet queued for
1359 transmission in the transmit interrupt handler. However, we must
1360 ensure that the transmit interrupt does not reset the 'tbusy' flag
1361 just before we set it, as this will result in a "transmit timeout".
1362 */
1363 set_bit(SEND_TXIRQ_CRIT, (void*)&card->wandev.critical);
1364 if(chan->transmit_length) {
1365 netif_stop_queue(dev);
1366 chan->tick_counter = jiffies;
1367 clear_bit(SEND_TXIRQ_CRIT, (void*)&card->wandev.critical);
1368 return 1;
1369 }
1370 clear_bit(SEND_TXIRQ_CRIT, (void*)&card->wandev.critical);
1371
1372 /* Move the if_header() code to here. By inserting frame
1373 * relay header in if_header() we would break the
1374 * tcpdump and other packet sniffers */
1375 chan->fr_header_len = setup_fr_header(skb,dev,chan->common.usedby);
1376 if (chan->fr_header_len < 0 ){
1377 ++chan->ifstats.tx_dropped;
1378 ++card->wandev.stats.tx_dropped;
1379
1380 dev_kfree_skb_any(skb);
1381 netif_start_queue(dev);
1382 return 0;
1383 }
1384
1385 sendpacket = skb->data;
1386
1387 udp_type = udp_pkt_type(skb, card);
1388
1389 if(udp_type != UDP_INVALID_TYPE) {
1390 if(store_udp_mgmt_pkt(udp_type, UDP_PKT_FRM_STACK, card, skb,
1391 chan->dlci)) {
1392 adptr_flags->imask |= FR_INTR_TIMER;
1393 if (udp_type == UDP_FPIPE_TYPE){
1394 chan->drvstats_if_send.
1395 if_send_PIPE_request ++;
1396 }
1397 }
1398 netif_start_queue(dev);
1399 return 0;
1400 }
1401
1402 //FIXME: can we do better than sendpacket[2]?
1403 if ((chan->common.usedby == WANPIPE) && (sendpacket[2] == 0x45)) {
1404
1405 /* check to see if the source IP address is a broadcast or */
1406 /* multicast IP address */
1407 if(chk_bcast_mcast_addr(card, dev, skb)){
1408 ++chan->ifstats.tx_dropped;
1409 ++card->wandev.stats.tx_dropped;
1410 dev_kfree_skb_any(skb);
1411 netif_start_queue(dev);
1412 return 0;
1413 }
1414 }
1415
1416
1417 /* Lock the S514/S508 card: SMP Supported */
1418 s508_s514_lock(card,&smp_flags);
1419
1420 if (test_and_set_bit(SEND_CRIT, (void*)&card->wandev.critical)) {
1421
1422 chan->drvstats_if_send.if_send_critical_non_ISR ++;
1423 chan->ifstats.tx_dropped ++;
1424 printk(KERN_INFO "%s Critical in IF_SEND: if_send() already running!\n",
1425 card->devname);
1426 goto if_send_start_and_exit;
1427 }
1428
1429 /* API packet check: minimum packet size must be greater than
1430 * 16 byte API header */
1431 if((chan->common.usedby == API) && (skb->len <= sizeof(api_tx_hdr_t))) {
1432 ++chan->ifstats.tx_dropped;
1433 ++card->wandev.stats.tx_dropped;
1434
1435
1436 goto if_send_start_and_exit;
1437
1438 }else{
1439 /* During API transmission, get rid of the API header */
1440 if (chan->common.usedby == API) {
1441 api_tx_hdr_t* api_tx_hdr;
1442 api_tx_hdr = (api_tx_hdr_t*)&skb->data[0x00];
1443 attr = api_tx_hdr->attr;
1444 skb_pull(skb,sizeof(api_tx_hdr_t));
1445 }
1446 }
1447
1448 if (card->wandev.state != WAN_CONNECTED) {
1449 chan->drvstats_if_send.if_send_wan_disconnected ++;
1450 ++chan->ifstats.tx_dropped;
1451 ++card->wandev.stats.tx_dropped;
1452
1453 } else if (chan->common.state != WAN_CONNECTED) {
1454 chan->drvstats_if_send.if_send_dlci_disconnected ++;
1455
1456 /* Update the DLCI state in timer interrupt */
1457 card->u.f.timer_int_enabled |= TMR_INT_ENABLED_UPDATE_STATE;
1458 adptr_flags->imask |= FR_INTR_TIMER;
1459
1460 ++chan->ifstats.tx_dropped;
1461 ++card->wandev.stats.tx_dropped;
1462
1463 } else if (!is_tx_ready(card, chan)) {
1464 /* No tx buffers available, store for delayed transmit */
1465 if (!setup_for_delayed_transmit(dev, skb)){
1466 set_bit(1,&delay_tx_queued);
1467 }
1468 chan->drvstats_if_send.if_send_no_bfrs++;
1469
1470 } else if (!skb->protocol) {
1471 /* No protocols drop packet */
1472 chan->drvstats_if_send.if_send_protocol_error ++;
1473 ++card->wandev.stats.tx_errors;
1474
1475 } else if (test_bit(ARP_CRIT,&card->wandev.critical)){
1476 /* We are trying to send an ARP Packet, block IP data until
1477 * ARP is sent */
1478 ++chan->ifstats.tx_dropped;
1479 ++card->wandev.stats.tx_dropped;
1480
1481 } else {
1482 //FIXME: IPX is not implemented in this version of Frame Relay ?
1483 if((chan->common.usedby == WANPIPE) &&
1484 sendpacket[1] == 0x00 &&
1485 sendpacket[2] == 0x80 &&
1486 sendpacket[6] == 0x81 &&
1487 sendpacket[7] == 0x37) {
1488
1489 if( chan->enable_IPX ) {
1490 switch_net_numbers(sendpacket,
1491 chan->network_number, 0);
1492 } else {
1493 //FIXME: Take this out when IPX is fixed
1494 printk(KERN_INFO
1495 "%s: WARNING: Unsupported IPX data in send, packet dropped\n",
1496 card->devname);
1497 }
1498
1499 }else{
1500 err = fr_send_data_header(card, chan->dlci, attr, skb->len, skb->data, chan->fr_header_len);
1501 if (err) {
1502 switch(err) {
1503 case FRRES_CIR_OVERFLOW:
1504 case FRRES_BUFFER_OVERFLOW:
1505 if (!setup_for_delayed_transmit(dev, skb)){
1506 set_bit(1,&delay_tx_queued);
1507 }
1508 chan->drvstats_if_send.
1509 if_send_adptr_bfrs_full ++;
1510 break;
1511
1512 case FRRES_TOO_LONG:
1513 if (net_ratelimit()){
1514 printk(KERN_INFO
1515 "%s: Error: Frame too long, transmission failed %i\n",
1516 card->devname, (unsigned int)skb->len);
1517 }
1518 /* Drop down to default */
1519 default:
1520 chan->drvstats_if_send.
1521 if_send_dlci_disconnected ++;
1522 ++chan->ifstats.tx_dropped;
1523 ++card->wandev.stats.tx_dropped;
1524 break;
1525 }
1526 } else {
1527 chan->drvstats_if_send.
1528 if_send_bfr_passed_to_adptr++;
1529 ++chan->ifstats.tx_packets;
1530 ++card->wandev.stats.tx_packets;
1531
1532 chan->ifstats.tx_bytes += skb->len;
1533 card->wandev.stats.tx_bytes += skb->len;
1534 dev->trans_start = jiffies;
1535 }
1536 }
1537 }
1538
1539if_send_start_and_exit:
1540
1541 netif_start_queue(dev);
1542
1543 /* If we queued the packet for transmission, we must not
1544 * deallocate it. The packet is unlinked from the IP stack
1545 * not copied. Therefore, we must keep the original packet */
1546 if (!test_bit(1,&delay_tx_queued)) {
1547 dev_kfree_skb_any(skb);
1548 }else{
1549 adptr_flags->imask |= FR_INTR_TXRDY;
1550 card->u.f.tx_interrupts_pending ++;
1551 }
1552
1553 clear_bit(SEND_CRIT, (void*)&card->wandev.critical);
1554
1555 s508_s514_unlock(card,&smp_flags);
1556
1557 return 0;
1558}
1559
1560
1561
1562/*============================================================================
1563 * Setup so that a frame can be transmitted on the occurrence of a transmit
1564 * interrupt.
1565 */
1566static int setup_for_delayed_transmit(struct net_device* dev,
1567 struct sk_buff *skb)
1568{
1569 fr_channel_t* chan = dev->priv;
1570 sdla_t* card = chan->card;
1571 fr_dlci_interface_t* dlci_interface;
1572 int len = skb->len;
1573
1574 /* Check that the dlci is properly configured,
1575 * before using tx interrupt */
1576 if (!chan->dlci_int_interface){
1577 if (net_ratelimit()){
1578 printk(KERN_INFO
1579 "%s: ERROR on DLCI %i: Not configured properly !\n",
1580 card->devname, chan->dlci);
1581 printk(KERN_INFO "%s: Please contact Sangoma Technologies\n",
1582 card->devname);
1583 }
1584 return 1;
1585 }
1586
1587 dlci_interface = chan->dlci_int_interface;
1588
1589 if(chan->transmit_length) {
1590 printk(KERN_INFO "%s: Big mess in setup_for_del...\n",
1591 card->devname);
1592 return 1;
1593 }
1594
1595 if(len > FR_MAX_NO_DATA_BYTES_IN_FRAME) {
1596 //FIXME: increment some statistic */
1597 return 1;
1598 }
1599
1600 chan->transmit_length = len;
1601 chan->delay_skb = skb;
1602
1603 dlci_interface->gen_interrupt |= FR_INTR_TXRDY;
1604 dlci_interface->packet_length = len;
1605
1606 /* Turn on TX interrupt at the end of if_send */
1607 return 0;
1608}
1609
1610
1611/*============================================================================
1612 * Check to see if the packet to be transmitted contains a broadcast or
1613 * multicast source IP address.
1614 * Return 0 if not broadcast/multicast address, otherwise return 1.
1615 */
1616
1617static int chk_bcast_mcast_addr(sdla_t *card, struct net_device* dev,
1618 struct sk_buff *skb)
1619{
1620 u32 src_ip_addr;
1621 u32 broadcast_ip_addr = 0;
1622 struct in_device *in_dev;
1623 fr_channel_t* chan = dev->priv;
1624
1625 /* read the IP source address from the outgoing packet */
1626 src_ip_addr = *(u32 *)(skb->data + 14);
1627
1628 /* read the IP broadcast address for the device */
1629 in_dev = dev->ip_ptr;
1630 if(in_dev != NULL) {
1631 struct in_ifaddr *ifa= in_dev->ifa_list;
1632 if(ifa != NULL)
1633 broadcast_ip_addr = ifa->ifa_broadcast;
1634 else
1635 return 0;
1636 }
1637
1638 /* check if the IP Source Address is a Broadcast address */
1639 if((dev->flags & IFF_BROADCAST) && (src_ip_addr == broadcast_ip_addr)) {
1640 printk(KERN_INFO
1641 "%s: Broadcast Source Address silently discarded\n",
1642 card->devname);
1643 return 1;
1644 }
1645
1646 /* check if the IP Source Address is a Multicast address */
1647 if((chan->mc == WANOPT_NO) && (ntohl(src_ip_addr) >= 0xE0000001) &&
1648 (ntohl(src_ip_addr) <= 0xFFFFFFFE)) {
1649 printk(KERN_INFO
1650 "%s: Multicast Source Address silently discarded\n",
1651 card->devname);
1652 return 1;
1653 }
1654
1655 return 0;
1656}
1657
1658/*============================================================================
1659 * Reply to UDP Management system.
1660 * Return nothing.
1661 */
1662static int reply_udp( unsigned char *data, unsigned int mbox_len )
1663{
1664 unsigned short len, udp_length, temp, ip_length;
1665 unsigned long ip_temp;
1666 int even_bound = 0;
1667
1668
1669 fr_udp_pkt_t *fr_udp_pkt = (fr_udp_pkt_t *)data;
1670
1671 /* Set length of packet */
1672 len = //sizeof(fr_encap_hdr_t)+
1673 sizeof(ip_pkt_t)+
1674 sizeof(udp_pkt_t)+
1675 sizeof(wp_mgmt_t)+
1676 sizeof(cblock_t)+
1677 mbox_len;
1678
1679
1680 /* fill in UDP reply */
1681 fr_udp_pkt->wp_mgmt.request_reply = UDPMGMT_REPLY;
1682
1683 /* fill in UDP length */
1684 udp_length = sizeof(udp_pkt_t)+
1685 sizeof(wp_mgmt_t)+
1686 sizeof(cblock_t)+
1687 mbox_len;
1688
1689
1690 /* put it on an even boundary */
1691 if ( udp_length & 0x0001 ) {
1692 udp_length += 1;
1693 len += 1;
1694 even_bound = 1;
1695 }
1696
1697 temp = (udp_length<<8)|(udp_length>>8);
1698 fr_udp_pkt->udp_pkt.udp_length = temp;
1699
1700 /* swap UDP ports */
1701 temp = fr_udp_pkt->udp_pkt.udp_src_port;
1702 fr_udp_pkt->udp_pkt.udp_src_port =
1703 fr_udp_pkt->udp_pkt.udp_dst_port;
1704 fr_udp_pkt->udp_pkt.udp_dst_port = temp;
1705
1706
1707
1708 /* add UDP pseudo header */
1709 temp = 0x1100;
1710 *((unsigned short *)
1711 (fr_udp_pkt->data+mbox_len+even_bound)) = temp;
1712 temp = (udp_length<<8)|(udp_length>>8);
1713 *((unsigned short *)
1714 (fr_udp_pkt->data+mbox_len+even_bound+2)) = temp;
1715
1716 /* calculate UDP checksum */
1717 fr_udp_pkt->udp_pkt.udp_checksum = 0;
1718
1719 fr_udp_pkt->udp_pkt.udp_checksum =
1720 calc_checksum(&data[UDP_OFFSET/*+sizeof(fr_encap_hdr_t)*/],
1721 udp_length+UDP_OFFSET);
1722
1723 /* fill in IP length */
1724 ip_length = udp_length + sizeof(ip_pkt_t);
1725 temp = (ip_length<<8)|(ip_length>>8);
1726 fr_udp_pkt->ip_pkt.total_length = temp;
1727
1728 /* swap IP addresses */
1729 ip_temp = fr_udp_pkt->ip_pkt.ip_src_address;
1730 fr_udp_pkt->ip_pkt.ip_src_address =
1731 fr_udp_pkt->ip_pkt.ip_dst_address;
1732 fr_udp_pkt->ip_pkt.ip_dst_address = ip_temp;
1733
1734
1735 /* fill in IP checksum */
1736 fr_udp_pkt->ip_pkt.hdr_checksum = 0;
1737 fr_udp_pkt->ip_pkt.hdr_checksum =
1738 calc_checksum(&data[/*sizeof(fr_encap_hdr_t)*/0],
1739 sizeof(ip_pkt_t));
1740
1741 return len;
1742} /* reply_udp */
1743
1744unsigned short calc_checksum (char *data, int len)
1745{
1746 unsigned short temp;
1747 unsigned long sum=0;
1748 int i;
1749
1750 for( i = 0; i <len; i+=2 ) {
1751 memcpy(&temp,&data[i],2);
1752 sum += (unsigned long)temp;
1753 }
1754
1755 while (sum >> 16 ) {
1756 sum = (sum & 0xffffUL) + (sum >> 16);
1757 }
1758
1759 temp = (unsigned short)sum;
1760 temp = ~temp;
1761
1762 if( temp == 0 )
1763 temp = 0xffff;
1764
1765 return temp;
1766}
1767
1768/*
1769 If incoming is 0 (outgoing)- if the net numbers is ours make it 0
1770 if incoming is 1 - if the net number is 0 make it ours
1771
1772*/
1773static void switch_net_numbers(unsigned char *sendpacket, unsigned long network_number, unsigned char incoming)
1774{
1775 unsigned long pnetwork_number;
1776
1777 pnetwork_number = (unsigned long)((sendpacket[14] << 24) +
1778 (sendpacket[15] << 16) + (sendpacket[16] << 8) +
1779 sendpacket[17]);
1780
1781 if (!incoming) {
1782 /* If the destination network number is ours, make it 0 */
1783 if( pnetwork_number == network_number) {
1784 sendpacket[14] = sendpacket[15] = sendpacket[16] =
1785 sendpacket[17] = 0x00;
1786 }
1787 } else {
1788 /* If the incoming network is 0, make it ours */
1789 if( pnetwork_number == 0) {
1790 sendpacket[14] = (unsigned char)(network_number >> 24);
1791 sendpacket[15] = (unsigned char)((network_number &
1792 0x00FF0000) >> 16);
1793 sendpacket[16] = (unsigned char)((network_number &
1794 0x0000FF00) >> 8);
1795 sendpacket[17] = (unsigned char)(network_number &
1796 0x000000FF);
1797 }
1798 }
1799
1800
1801 pnetwork_number = (unsigned long)((sendpacket[26] << 24) +
1802 (sendpacket[27] << 16) + (sendpacket[28] << 8) +
1803 sendpacket[29]);
1804
1805 if( !incoming ) {
1806 /* If the source network is ours, make it 0 */
1807 if( pnetwork_number == network_number) {
1808 sendpacket[26] = sendpacket[27] = sendpacket[28] =
1809 sendpacket[29] = 0x00;
1810 }
1811 } else {
1812 /* If the source network is 0, make it ours */
1813 if( pnetwork_number == 0 ) {
1814 sendpacket[26] = (unsigned char)(network_number >> 24);
1815 sendpacket[27] = (unsigned char)((network_number &
1816 0x00FF0000) >> 16);
1817 sendpacket[28] = (unsigned char)((network_number &
1818 0x0000FF00) >> 8);
1819 sendpacket[29] = (unsigned char)(network_number &
1820 0x000000FF);
1821 }
1822 }
1823} /* switch_net_numbers */
1824
1825/*============================================================================
1826 * Get ethernet-style interface statistics.
1827 * Return a pointer to struct enet_statistics.
1828 */
1829static struct net_device_stats *if_stats(struct net_device *dev)
1830{
1831 fr_channel_t* chan = dev->priv;
1832
1833 if(chan == NULL)
1834 return NULL;
1835
1836 return &chan->ifstats;
1837}
1838
1839/****** Interrupt Handlers **************************************************/
1840
1841/*============================================================================
1842 * fr_isr: S508 frame relay interrupt service routine.
1843 *
1844 * Description:
1845 * Frame relay main interrupt service route. This
1846 * function check the interrupt type and takes
1847 * the appropriate action.
1848 */
1849static void fr_isr (sdla_t* card)
1850{
1851 fr508_flags_t* flags = card->flags;
1852 char *ptr = &flags->iflag;
1853 int i,err;
1854 fr_mbox_t* mbox = card->mbox;
1855
1856 /* This flag prevents nesting of interrupts. See sdla_isr() routine
1857 * in sdlamain.c. */
1858 card->in_isr = 1;
1859
1860 ++card->statistics.isr_entry;
1861
1862
1863 /* All peripheral (configuraiton, re-configuration) events
1864 * take presidence over the ISR. Thus, retrigger */
1865 if (test_bit(PERI_CRIT, (void*)&card->wandev.critical)) {
1866 ++card->statistics.isr_already_critical;
1867 goto fr_isr_exit;
1868 }
1869
1870 if(card->hw.type != SDLA_S514) {
1871 if (test_bit(SEND_CRIT, (void*)&card->wandev.critical)) {
1872 printk(KERN_INFO "%s: Critical while in ISR: If Send Running!\n",
1873 card->devname);
1874 ++card->statistics.isr_already_critical;
1875 goto fr_isr_exit;
1876 }
1877 }
1878
1879 switch (flags->iflag) {
1880
1881 case FR_INTR_RXRDY: /* receive interrupt */
1882 ++card->statistics.isr_rx;
1883 rx_intr(card);
1884 break;
1885
1886
1887 case FR_INTR_TXRDY: /* transmit interrupt */
1888 ++ card->statistics.isr_tx;
1889 tx_intr(card);
1890 break;
1891
1892 case FR_INTR_READY:
1893 Intr_test_counter++;
1894 ++card->statistics.isr_intr_test;
1895 break;
1896
1897 case FR_INTR_DLC: /* Event interrupt occurred */
1898 mbox->cmd.command = FR_READ_STATUS;
1899 mbox->cmd.length = 0;
1900 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
1901 if (err)
1902 fr_event(card, err, mbox);
1903 break;
1904
1905 case FR_INTR_TIMER: /* Timer interrupt */
1906 timer_intr(card);
1907 break;
1908
1909 default:
1910 ++card->statistics.isr_spurious;
1911 spur_intr(card);
1912 printk(KERN_INFO "%s: Interrupt Type 0x%02X!\n",
1913 card->devname, flags->iflag);
1914
1915 printk(KERN_INFO "%s: ID Bytes = ",card->devname);
1916 for(i = 0; i < 8; i ++)
1917 printk(KERN_INFO "0x%02X ", *(ptr + 0x28 + i));
1918 printk(KERN_INFO "\n");
1919
1920 break;
1921 }
1922
1923fr_isr_exit:
1924
1925 card->in_isr = 0;
1926 flags->iflag = 0;
1927 return;
1928}
1929
1930
1931
1932/*===========================================================
1933 * rx_intr Receive interrupt handler.
1934 *
1935 * Description
1936 * Upon receiveing an interrupt:
1937 * 1. Check that the firmware is in sync with
1938 * the driver.
1939 * 2. Find an appropriate network interface
1940 * based on the received dlci number.
1941 * 3. Check that the netowrk interface exists
1942 * and that it's setup properly.
1943 * 4. Copy the data into an skb buffer.
1944 * 5. Check the packet type and take
1945 * appropriate acton: UPD, API, ARP or Data.
1946 */
1947
1948static void rx_intr (sdla_t* card)
1949{
1950 fr_rx_buf_ctl_t* frbuf = card->rxmb;
1951 fr508_flags_t* flags = card->flags;
1952 fr_channel_t* chan;
1953 char *ptr = &flags->iflag;
1954 struct sk_buff* skb;
1955 struct net_device* dev;
1956 void* buf;
1957 unsigned dlci, len, offs, len_incl_hdr;
1958 int i, udp_type;
1959
1960
1961 /* Check that firmware buffers are in sync */
1962 if (frbuf->flag != 0x01) {
1963
1964 printk(KERN_INFO
1965 "%s: corrupted Rx buffer @ 0x%X, flag = 0x%02X!\n",
1966 card->devname, (unsigned)frbuf, frbuf->flag);
1967
1968 printk(KERN_INFO "%s: ID Bytes = ",card->devname);
1969 for(i = 0; i < 8; i ++)
1970 printk(KERN_INFO "0x%02X ", *(ptr + 0x28 + i));
1971 printk(KERN_INFO "\n");
1972
1973 ++card->statistics.rx_intr_corrupt_rx_bfr;
1974
1975 /* Bug Fix: Mar 6 2000
1976 * If we get a corrupted mailbox, it means that driver
1977 * is out of sync with the firmware. There is no recovery.
1978 * If we don't turn off all interrupts for this card
1979 * the machine will crash.
1980 */
1981 printk(KERN_INFO "%s: Critical router failure ...!!!\n", card->devname);
1982 printk(KERN_INFO "Please contact Sangoma Technologies !\n");
1983 fr_set_intr_mode(card, 0, 0, 0);
1984 return;
1985 }
1986
1987 len = frbuf->length;
1988 dlci = frbuf->dlci;
1989 offs = frbuf->offset;
1990
1991 /* Find the network interface for this packet */
1992 dev = find_channel(card, dlci);
1993
1994
1995 /* Check that the network interface is active and
1996 * properly setup */
1997 if (dev == NULL) {
1998 if( net_ratelimit()) {
1999 printk(KERN_INFO "%s: received data on unconfigured DLCI %d!\n",
2000 card->devname, dlci);
2001 }
2002 ++card->statistics.rx_intr_on_orphaned_DLCI;
2003 ++card->wandev.stats.rx_dropped;
2004 goto rx_done;
2005 }
2006
2007 if ((chan = dev->priv) == NULL){
2008 if( net_ratelimit()) {
2009 printk(KERN_INFO "%s: received data on unconfigured DLCI %d!\n",
2010 card->devname, dlci);
2011 }
2012 ++card->statistics.rx_intr_on_orphaned_DLCI;
2013 ++card->wandev.stats.rx_dropped;
2014 goto rx_done;
2015 }
2016
2017 skb = dev_alloc_skb(len);
2018
2019 if (!netif_running(dev) || (skb == NULL)){
2020
2021 ++chan->ifstats.rx_dropped;
2022
2023 if(skb == NULL) {
2024 if (net_ratelimit()) {
2025 printk(KERN_INFO
2026 "%s: no socket buffers available!\n",
2027 card->devname);
2028 }
2029 chan->drvstats_rx_intr.rx_intr_no_socket ++;
2030 }
2031
2032 if (!netif_running(dev)){
2033 chan->drvstats_rx_intr.
2034 rx_intr_dev_not_started ++;
2035 if (skb){
2036 dev_kfree_skb_any(skb);
2037 }
2038 }
2039 goto rx_done;
2040 }
2041
2042 /* Copy data from the board into the socket buffer */
2043 if ((offs + len) > card->u.f.rx_top + 1) {
2044 unsigned tmp = card->u.f.rx_top - offs + 1;
2045
2046 buf = skb_put(skb, tmp);
2047 sdla_peek(&card->hw, offs, buf, tmp);
2048 offs = card->u.f.rx_base;
2049 len -= tmp;
2050 }
2051
2052 buf = skb_put(skb, len);
2053 sdla_peek(&card->hw, offs, buf, len);
2054
2055
2056 /* We got the packet from the bard.
2057 * Check the packet type and take appropriate action */
2058
2059 udp_type = udp_pkt_type( skb, card );
2060
2061 if(udp_type != UDP_INVALID_TYPE) {
2062
2063 /* UDP Debug packet received, store the
2064 * packet and handle it in timer interrupt */
2065
2066 skb_pull(skb, 1);
2067 if (wanrouter_type_trans(skb, dev)){
2068 if(store_udp_mgmt_pkt(udp_type,UDP_PKT_FRM_NETWORK,card,skb,dlci)){
2069
2070 flags->imask |= FR_INTR_TIMER;
2071
2072 if (udp_type == UDP_FPIPE_TYPE){
2073 ++chan->drvstats_rx_intr.rx_intr_PIPE_request;
2074 }
2075 }
2076 }
2077
2078 }else if (chan->common.usedby == API) {
2079
2080 /* We are in API mode.
2081 * Add an API header to the RAW packet
2082 * and queue it into a circular buffer.
2083 * Then kick the fr_bh() bottom half handler */
2084
2085 api_rx_hdr_t* api_rx_hdr;
2086 chan->drvstats_rx_intr.rx_intr_bfr_passed_to_stack ++;
2087 chan->ifstats.rx_packets ++;
2088 card->wandev.stats.rx_packets ++;
2089
2090 chan->ifstats.rx_bytes += skb->len;
2091 card->wandev.stats.rx_bytes += skb->len;
2092
2093 skb_push(skb, sizeof(api_rx_hdr_t));
2094 api_rx_hdr = (api_rx_hdr_t*)&skb->data[0x00];
2095 api_rx_hdr->attr = frbuf->attr;
2096 api_rx_hdr->time_stamp = frbuf->tmstamp;
2097
2098 skb->protocol = htons(ETH_P_IP);
2099 skb->mac.raw = skb->data;
2100 skb->dev = dev;
2101 skb->pkt_type = WAN_PACKET_DATA;
2102
2103 bh_enqueue(dev, skb);
2104
2105 trigger_fr_bh(chan);
2106
2107 }else if (handle_IPXWAN(skb->data,chan->name,chan->enable_IPX, chan->network_number)){
2108
2109 //FIXME: Frame Relay IPX is not supported, Yet !
2110 //if (chan->enable_IPX) {
2111 // fr_send(card, dlci, 0, skb->len,skb->data);
2112 //}
2113 dev_kfree_skb_any(skb);
2114
2115 } else if (is_arp(skb->data)) {
2116
2117 /* ARP support enabled Mar 16 2000
2118 * Process incoming ARP reply/request, setup
2119 * dynamic routes. */
2120
2121 if (process_ARP((arphdr_1490_t *)skb->data, card, dev)) {
2122 if (net_ratelimit()){
2123 printk (KERN_INFO
2124 "%s: Error processing ARP Packet.\n",
2125 card->devname);
2126 }
2127 }
2128 dev_kfree_skb_any(skb);
2129
2130 } else if (skb->data[0] != 0x03) {
2131
2132 if (net_ratelimit()) {
2133 printk(KERN_INFO "%s: Non IETF packet discarded.\n",
2134 card->devname);
2135 }
2136 dev_kfree_skb_any(skb);
2137
2138 } else {
2139
2140 len_incl_hdr = skb->len;
2141 /* Decapsulate packet and pass it up the
2142 protocol stack */
2143 skb->dev = dev;
2144
2145 if (chan->common.usedby == BRIDGE || chan->common.usedby == BRIDGE_NODE){
2146
2147 /* Make sure it's an Ethernet frame, otherwise drop it */
2148 if (!memcmp(skb->data, "\x03\x00\x80\x00\x80\xC2\x00\x07", 8)) {
2149 skb_pull(skb, 8);
2150 skb->protocol=eth_type_trans(skb,dev);
2151 }else{
2152 ++chan->drvstats_rx_intr.rx_intr_bfr_not_passed_to_stack;
2153 ++chan->ifstats.rx_errors;
2154 ++card->wandev.stats.rx_errors;
2155 goto rx_done;
2156 }
2157 }else{
2158
2159 /* remove hardware header */
2160 buf = skb_pull(skb, 1);
2161
2162 if (!wanrouter_type_trans(skb, dev)) {
2163
2164 /* can't decapsulate packet */
2165 dev_kfree_skb_any(skb);
2166
2167 ++chan->drvstats_rx_intr.rx_intr_bfr_not_passed_to_stack;
2168 ++chan->ifstats.rx_errors;
2169 ++card->wandev.stats.rx_errors;
2170 goto rx_done;
2171 }
2172 skb->mac.raw = skb->data;
2173 }
2174
2175
2176 /* Send a packet up the IP stack */
2177 skb->dev->last_rx = jiffies;
2178 netif_rx(skb);
2179 ++chan->drvstats_rx_intr.rx_intr_bfr_passed_to_stack;
2180 ++chan->ifstats.rx_packets;
2181 ++card->wandev.stats.rx_packets;
2182
2183 chan->ifstats.rx_bytes += len_incl_hdr;
2184 card->wandev.stats.rx_bytes += len_incl_hdr;
2185 }
2186
2187rx_done:
2188
2189 /* Release buffer element and calculate a pointer to the next one */
2190 frbuf->flag = 0;
2191 card->rxmb = ++frbuf;
2192 if ((void*)frbuf > card->u.f.rxmb_last)
2193 card->rxmb = card->u.f.rxmb_base;
2194
2195}
2196
2197/*==================================================================
2198 * tx_intr: Transmit interrupt handler.
2199 *
2200 * Rationale:
2201 * If the board is busy transmitting, if_send() will
2202 * buffers a single packet and turn on
2203 * the tx interrupt. Tx interrupt will be called
2204 * by the board, once the firmware can send more
2205 * data. Thus, no polling is required.
2206 *
2207 * Description:
2208 * Tx interrupt is called for each
2209 * configured dlci channel. Thus:
2210 * 1. Obtain the netowrk interface based on the
2211 * dlci number.
2212 * 2. Check that network interface is up and
2213 * properly setup.
2214 * 3. Check for a buffered packet.
2215 * 4. Transmit the packet.
2216 * 5. If we are in WANPIPE mode, mark the
2217 * NET_BH handler.
2218 * 6. If we are in API mode, kick
2219 * the AF_WANPIPE socket for more data.
2220 *
2221 */
2222static void tx_intr(sdla_t *card)
2223{
2224 fr508_flags_t* flags = card->flags;
2225 fr_tx_buf_ctl_t* bctl;
2226 struct net_device* dev;
2227 fr_channel_t* chan;
2228
2229 if(card->hw.type == SDLA_S514){
2230 bctl = (void*)(flags->tse_offs + card->hw.dpmbase);
2231 }else{
2232 bctl = (void*)(flags->tse_offs - FR_MB_VECTOR +
2233 card->hw.dpmbase);
2234 }
2235
2236 /* Find the structure and make it unbusy */
2237 dev = find_channel(card, flags->dlci);
2238 if (dev == NULL){
2239 printk(KERN_INFO "NO DEV IN TX Interrupt\n");
2240 goto end_of_tx_intr;
2241 }
2242
2243 if ((chan = dev->priv) == NULL){
2244 printk(KERN_INFO "NO CHAN IN TX Interrupt\n");
2245 goto end_of_tx_intr;
2246 }
2247
2248 if(!chan->transmit_length || !chan->delay_skb) {
2249 printk(KERN_INFO "%s: tx int error - transmit length zero\n",
2250 card->wandev.name);
2251 goto end_of_tx_intr;
2252 }
2253
2254 /* If the 'if_send()' procedure is currently checking the 'tbusy'
2255 status, then we cannot transmit. Instead, we configure the microcode
2256 so as to re-issue this transmit interrupt at a later stage.
2257 */
2258 if (test_bit(SEND_TXIRQ_CRIT, (void*)&card->wandev.critical)) {
2259
2260 fr_dlci_interface_t* dlci_interface = chan->dlci_int_interface;
2261 bctl->flag = 0xA0;
2262 dlci_interface->gen_interrupt |= FR_INTR_TXRDY;
2263 return;
2264
2265 }else{
2266 bctl->dlci = flags->dlci;
2267 bctl->length = chan->transmit_length+chan->fr_header_len;
2268 sdla_poke(&card->hw,
2269 fr_send_hdr(card,bctl->dlci,bctl->offset),
2270 chan->delay_skb->data,
2271 chan->delay_skb->len);
2272 bctl->flag = 0xC0;
2273
2274 ++chan->ifstats.tx_packets;
2275 ++card->wandev.stats.tx_packets;
2276 chan->ifstats.tx_bytes += chan->transmit_length;
2277 card->wandev.stats.tx_bytes += chan->transmit_length;
2278
2279 /* We must free an sk buffer, which we used
2280 * for delayed transmission; Otherwise, the sock
2281 * will run out of memory */
2282 dev_kfree_skb_any(chan->delay_skb);
2283
2284 chan->delay_skb = NULL;
2285 chan->transmit_length = 0;
2286
2287 dev->trans_start = jiffies;
2288
2289 if (netif_queue_stopped(dev)){
2290 /* If using API, than wakeup socket BH handler */
2291 if (chan->common.usedby == API){
2292 netif_start_queue(dev);
2293 wakeup_sk_bh(dev);
2294 }else{
2295 netif_wake_queue(dev);
2296 }
2297 }
2298 }
2299
2300end_of_tx_intr:
2301
2302 /* if any other interfaces have transmit interrupts pending,
2303 * do not disable the global transmit interrupt */
2304 if(!(-- card->u.f.tx_interrupts_pending))
2305 flags->imask &= ~FR_INTR_TXRDY;
2306
2307
2308}
2309
2310
2311/*============================================================================
2312 * timer_intr: Timer interrupt handler.
2313 *
2314 * Rationale:
2315 * All commans must be executed within the timer
2316 * interrupt since no two commands should execute
2317 * at the same time.
2318 *
2319 * Description:
2320 * The timer interrupt is used to:
2321 * 1. Processing udp calls from 'fpipemon'.
2322 * 2. Processing update calls from /proc file system
2323 * 3. Reading board-level statistics for
2324 * updating the proc file system.
2325 * 4. Sending inverse ARP request packets.
2326 * 5. Configure a dlci/channel.
2327 * 6. Unconfigure a dlci/channel. (Node only)
2328 */
2329
2330static void timer_intr(sdla_t *card)
2331{
2332 fr508_flags_t* flags = card->flags;
2333
2334 /* UDP Debuging: fpipemon call */
2335 if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_UDP) {
2336 if(card->u.f.udp_type == UDP_FPIPE_TYPE) {
2337 if(process_udp_mgmt_pkt(card)) {
2338 card->u.f.timer_int_enabled &=
2339 ~TMR_INT_ENABLED_UDP;
2340 }
2341 }
2342 }
2343
2344 /* /proc update call : triggered from update() */
2345 if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_UPDATE) {
2346 fr_get_err_stats(card);
2347 fr_get_stats(card);
2348 card->u.f.update_comms_stats = 0;
2349 card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_UPDATE;
2350 }
2351
2352 /* Update the channel state call. This is call is
2353 * triggered by if_send() function */
2354 if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_UPDATE_STATE){
2355 struct net_device *dev;
2356 if (card->wandev.state == WAN_CONNECTED){
2357 for (dev = card->wandev.dev; dev;
2358 dev = *((struct net_device **)dev->priv)){
2359 fr_channel_t *chan = dev->priv;
2360 if (chan->common.state != WAN_CONNECTED){
2361 update_chan_state(dev);
2362 }
2363 }
2364 }
2365 card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_UPDATE_STATE;
2366 }
2367
2368 /* configure a dlci/channel */
2369 if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_CONFIG){
2370 config_fr(card);
2371 card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_CONFIG;
2372 }
2373
2374 /* unconfigure a dlci/channel */
2375 if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_UNCONFIG){
2376 unconfig_fr(card);
2377 card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_UNCONFIG;
2378 }
2379
2380
2381 /* Transmit ARP packets */
2382 if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_ARP){
2383 int i=0;
2384 struct net_device *dev;
2385
2386 if (card->u.f.arp_dev == NULL)
2387 card->u.f.arp_dev = card->wandev.dev;
2388
2389 dev = card->u.f.arp_dev;
2390
2391 for (;;){
2392
2393 fr_channel_t *chan = dev->priv;
2394
2395 /* If the interface is brought down cancel sending In-ARPs */
2396 if (!(dev->flags&IFF_UP)){
2397 clear_bit(0,&chan->inarp_ready);
2398 }
2399
2400 if (test_bit(0,&chan->inarp_ready)){
2401
2402 if (check_tx_status(card,dev)){
2403 set_bit(ARP_CRIT,&card->wandev.critical);
2404 break;
2405 }
2406
2407 if (!send_inarp_request(card,dev)){
2408 trigger_fr_arp(dev);
2409 chan->inarp_tick = jiffies;
2410 }
2411
2412 clear_bit(0,&chan->inarp_ready);
2413 dev = move_dev_to_next(card,dev);
2414 break;
2415 }
2416 dev = move_dev_to_next(card,dev);
2417
2418 if (++i == card->wandev.new_if_cnt){
2419 card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_ARP;
2420 break;
2421 }
2422 }
2423 card->u.f.arp_dev = dev;
2424 }
2425
2426 if(!card->u.f.timer_int_enabled)
2427 flags->imask &= ~FR_INTR_TIMER;
2428}
2429
2430
2431/*============================================================================
2432 * spur_intr: Spurious interrupt handler.
2433 *
2434 * Description:
2435 * We don't know this interrupt.
2436 * Print a warning.
2437 */
2438
2439static void spur_intr (sdla_t* card)
2440{
2441 if (net_ratelimit()){
2442 printk(KERN_INFO "%s: spurious interrupt!\n", card->devname);
2443 }
2444}
2445
2446
2447//FIXME: Fix the IPX in next version
2448/*===========================================================================
2449 * Return 0 for non-IPXWAN packet
2450 * 1 for IPXWAN packet or IPX is not enabled!
2451 * FIXME: Use a IPX structure here not offsets
2452 */
2453static int handle_IPXWAN(unsigned char *sendpacket,
2454 char *devname, unsigned char enable_IPX,
2455 unsigned long network_number)
2456{
2457 int i;
2458
2459 if( sendpacket[1] == 0x00 && sendpacket[2] == 0x80 &&
2460 sendpacket[6] == 0x81 && sendpacket[7] == 0x37) {
2461
2462 /* It's an IPX packet */
2463 if (!enable_IPX){
2464 /* Return 1 so we don't pass it up the stack. */
2465 //FIXME: Take this out when IPX is fixed
2466 if (net_ratelimit()){
2467 printk (KERN_INFO
2468 "%s: WARNING: Unsupported IPX packet received and dropped\n",
2469 devname);
2470 }
2471 return 1;
2472 }
2473 } else {
2474 /* It's not IPX so return and pass it up the stack. */
2475 return 0;
2476 }
2477
2478 if( sendpacket[24] == 0x90 && sendpacket[25] == 0x04){
2479 /* It's IPXWAN */
2480
2481 if( sendpacket[10] == 0x02 && sendpacket[42] == 0x00){
2482
2483 /* It's a timer request packet */
2484 printk(KERN_INFO "%s: Received IPXWAN Timer Request packet\n",
2485 devname);
2486
2487 /* Go through the routing options and answer no to every
2488 * option except Unnumbered RIP/SAP
2489 */
2490 for(i = 49; sendpacket[i] == 0x00; i += 5){
2491 /* 0x02 is the option for Unnumbered RIP/SAP */
2492 if( sendpacket[i + 4] != 0x02){
2493 sendpacket[i + 1] = 0;
2494 }
2495 }
2496
2497 /* Skip over the extended Node ID option */
2498 if( sendpacket[i] == 0x04 ){
2499 i += 8;
2500 }
2501
2502 /* We also want to turn off all header compression opt.
2503 */
2504 for(; sendpacket[i] == 0x80 ;){
2505 sendpacket[i + 1] = 0;
2506 i += (sendpacket[i + 2] << 8) + (sendpacket[i + 3]) + 4;
2507 }
2508
2509 /* Set the packet type to timer response */
2510 sendpacket[42] = 0x01;
2511
2512 printk(KERN_INFO "%s: Sending IPXWAN Timer Response\n",
2513 devname);
2514
2515 } else if( sendpacket[42] == 0x02 ){
2516
2517 /* This is an information request packet */
2518 printk(KERN_INFO
2519 "%s: Received IPXWAN Information Request packet\n",
2520 devname);
2521
2522 /* Set the packet type to information response */
2523 sendpacket[42] = 0x03;
2524
2525 /* Set the router name */
2526 sendpacket[59] = 'F';
2527 sendpacket[60] = 'P';
2528 sendpacket[61] = 'I';
2529 sendpacket[62] = 'P';
2530 sendpacket[63] = 'E';
2531 sendpacket[64] = '-';
2532 sendpacket[65] = CVHexToAscii(network_number >> 28);
2533 sendpacket[66] = CVHexToAscii((network_number & 0x0F000000)>> 24);
2534 sendpacket[67] = CVHexToAscii((network_number & 0x00F00000)>> 20);
2535 sendpacket[68] = CVHexToAscii((network_number & 0x000F0000)>> 16);
2536 sendpacket[69] = CVHexToAscii((network_number & 0x0000F000)>> 12);
2537 sendpacket[70] = CVHexToAscii((network_number & 0x00000F00)>> 8);
2538 sendpacket[71] = CVHexToAscii((network_number & 0x000000F0)>> 4);
2539 sendpacket[72] = CVHexToAscii(network_number & 0x0000000F);
2540 for(i = 73; i < 107; i+= 1)
2541 {
2542 sendpacket[i] = 0;
2543 }
2544
2545 printk(KERN_INFO "%s: Sending IPXWAN Information Response packet\n",
2546 devname);
2547 } else {
2548
2549 printk(KERN_INFO "%s: Unknown IPXWAN packet!\n",devname);
2550 return 0;
2551 }
2552
2553 /* Set the WNodeID to our network address */
2554 sendpacket[43] = (unsigned char)(network_number >> 24);
2555 sendpacket[44] = (unsigned char)((network_number & 0x00FF0000) >> 16);
2556 sendpacket[45] = (unsigned char)((network_number & 0x0000FF00) >> 8);
2557 sendpacket[46] = (unsigned char)(network_number & 0x000000FF);
2558
2559 return 1;
2560 }
2561
2562 /* If we get here, it's an IPX-data packet so it'll get passed up the
2563 * stack.
2564 * switch the network numbers
2565 */
2566 switch_net_numbers(sendpacket, network_number ,1);
2567 return 0;
2568}
2569/*============================================================================
2570 * process_route
2571 *
2572 * Rationale:
2573 * If the interface goes down, or we receive an ARP request,
2574 * we have to change the network interface ip addresses.
2575 * This cannot be done within the interrupt.
2576 *
2577 * Description:
2578 *
2579 * This routine is called as a polling routine to dynamically
2580 * add/delete routes negotiated by inverse ARP. It is in this
2581 * "task" because we don't want routes to be added while in
2582 * interrupt context.
2583 *
2584 * Usage:
2585 * This function is called by fr_poll() polling funtion.
2586 */
2587
2588static void process_route(struct net_device *dev)
2589{
2590 fr_channel_t *chan = dev->priv;
2591 sdla_t *card = chan->card;
2592
2593 struct ifreq if_info;
2594 struct sockaddr_in *if_data;
2595 mm_segment_t fs = get_fs();
2596 u32 ip_tmp;
2597 int err;
2598
2599
2600 switch(chan->route_flag){
2601
2602 case ADD_ROUTE:
2603
2604 /* Set remote addresses */
2605 memset(&if_info, 0, sizeof(if_info));
2606 strcpy(if_info.ifr_name, dev->name);
2607
2608 set_fs(get_ds()); /* get user space block */
2609
2610 if_data = (struct sockaddr_in *)&if_info.ifr_dstaddr;
2611 if_data->sin_addr.s_addr = chan->ip_remote;
2612 if_data->sin_family = AF_INET;
2613 err = devinet_ioctl( SIOCSIFDSTADDR, &if_info );
2614
2615 set_fs(fs); /* restore old block */
2616
2617 if (err) {
2618 printk(KERN_INFO
2619 "%s: Route Add failed. Error: %d\n",
2620 card->devname,err);
2621 printk(KERN_INFO "%s: Address: %u.%u.%u.%u\n",
2622 chan->name, NIPQUAD(chan->ip_remote));
2623
2624 }else {
2625 printk(KERN_INFO "%s: Route Added Successfully: %u.%u.%u.%u\n",
2626 card->devname,NIPQUAD(chan->ip_remote));
2627 chan->route_flag = ROUTE_ADDED;
2628 }
2629 break;
2630
2631 case REMOVE_ROUTE:
2632
2633 /* Set remote addresses */
2634 memset(&if_info, 0, sizeof(if_info));
2635 strcpy(if_info.ifr_name, dev->name);
2636
2637 ip_tmp = get_ip_address(dev,WAN_POINTOPOINT_IP);
2638
2639 set_fs(get_ds()); /* get user space block */
2640
2641 if_data = (struct sockaddr_in *)&if_info.ifr_dstaddr;
2642 if_data->sin_addr.s_addr = 0;
2643 if_data->sin_family = AF_INET;
2644 err = devinet_ioctl( SIOCSIFDSTADDR, &if_info );
2645
2646 set_fs(fs);
2647
2648 if (err) {
2649 printk(KERN_INFO
2650 "%s: Deleting of route failed. Error: %d\n",
2651 card->devname,err);
2652 printk(KERN_INFO "%s: Address: %u.%u.%u.%u\n",
2653 dev->name,NIPQUAD(chan->ip_remote) );
2654
2655 } else {
2656 printk(KERN_INFO "%s: Route Removed Sucessfuly: %u.%u.%u.%u\n",
2657 card->devname,NIPQUAD(ip_tmp));
2658 chan->route_flag = NO_ROUTE;
2659 }
2660 break;
2661
2662 } /* Case Statement */
2663
2664}
2665
2666
2667
2668/****** Frame Relay Firmware-Specific Functions *****************************/
2669
2670/*============================================================================
2671 * Read firmware code version.
2672 * o fill string str with firmware version info.
2673 */
2674static int fr_read_version (sdla_t* card, char* str)
2675{
2676 fr_mbox_t* mbox = card->mbox;
2677 int retry = MAX_CMD_RETRY;
2678 int err;
2679
2680 do
2681 {
2682 mbox->cmd.command = FR_READ_CODE_VERSION;
2683 mbox->cmd.length = 0;
2684 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2685 } while (err && retry-- && fr_event(card, err, mbox));
2686
2687 if (!err && str) {
2688 int len = mbox->cmd.length;
2689 memcpy(str, mbox->data, len);
2690 str[len] = '\0';
2691 }
2692 return err;
2693}
2694
2695/*============================================================================
2696 * Set global configuration.
2697 */
2698static int fr_configure (sdla_t* card, fr_conf_t *conf)
2699{
2700 fr_mbox_t* mbox = card->mbox;
2701 int retry = MAX_CMD_RETRY;
2702 int dlci_num = card->u.f.dlci_num;
2703 int err, i;
2704
2705 do
2706 {
2707 memcpy(mbox->data, conf, sizeof(fr_conf_t));
2708
2709 if (dlci_num) for (i = 0; i < dlci_num; ++i)
2710 ((fr_conf_t*)mbox->data)->dlci[i] =
2711 card->u.f.node_dlci[i];
2712
2713 mbox->cmd.command = FR_SET_CONFIG;
2714 mbox->cmd.length =
2715 sizeof(fr_conf_t) + dlci_num * sizeof(short);
2716
2717 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2718
2719 } while (err && retry-- && fr_event(card, err, mbox));
2720
2721 /*NC Oct 12 2000 */
2722 if (err != CMD_OK){
2723 printk(KERN_ERR "%s: Frame Relay Configuration Failed: rc=0x%x\n",
2724 card->devname,err);
2725 }
2726
2727 return err;
2728}
2729
2730/*============================================================================
2731 * Set DLCI configuration.
2732 */
2733static int fr_dlci_configure (sdla_t* card, fr_dlc_conf_t *conf, unsigned dlci)
2734{
2735 fr_mbox_t* mbox = card->mbox;
2736 int retry = MAX_CMD_RETRY;
2737 int err;
2738
2739 do
2740 {
2741 memcpy(mbox->data, conf, sizeof(fr_dlc_conf_t));
2742 mbox->cmd.dlci = (unsigned short) dlci;
2743 mbox->cmd.command = FR_SET_CONFIG;
2744 mbox->cmd.length = sizeof(fr_dlc_conf_t);
2745 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2746 } while (err && retry--);
2747
2748 return err;
2749}
2750/*============================================================================
2751 * Set interrupt mode.
2752 */
2753static int fr_set_intr_mode (sdla_t* card, unsigned mode, unsigned mtu,
2754 unsigned short timeout)
2755{
2756 fr_mbox_t* mbox = card->mbox;
2757 fr508_intr_ctl_t* ictl = (void*)mbox->data;
2758 int retry = MAX_CMD_RETRY;
2759 int err;
2760
2761 do
2762 {
2763 memset(ictl, 0, sizeof(fr508_intr_ctl_t));
2764 ictl->mode = mode;
2765 ictl->tx_len = mtu;
2766 ictl->irq = card->hw.irq;
2767
2768 /* indicate timeout on timer */
2769 if (mode & 0x20) ictl->timeout = timeout;
2770
2771 mbox->cmd.length = sizeof(fr508_intr_ctl_t);
2772 mbox->cmd.command = FR_SET_INTR_MODE;
2773 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2774
2775 } while (err && retry-- && fr_event(card, err, mbox));
2776
2777 return err;
2778}
2779
2780/*============================================================================
2781 * Enable communications.
2782 */
2783static int fr_comm_enable (sdla_t* card)
2784{
2785 fr_mbox_t* mbox = card->mbox;
2786 int retry = MAX_CMD_RETRY;
2787 int err;
2788
2789 do
2790 {
2791 mbox->cmd.command = FR_COMM_ENABLE;
2792 mbox->cmd.length = 0;
2793 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2794 } while (err && retry-- && fr_event(card, err, mbox));
2795
2796 return err;
2797}
2798
2799/*============================================================================
2800 * fr_comm_disable
2801 *
2802 * Warning: This functin is called by the shutdown() procedure. It is void
2803 * since dev->priv are has already been deallocated and no
2804 * error checking is possible using fr_event() function.
2805 */
2806static void fr_comm_disable (sdla_t* card)
2807{
2808 fr_mbox_t* mbox = card->mbox;
2809 int retry = MAX_CMD_RETRY;
2810 int err;
2811
2812 do {
2813 mbox->cmd.command = FR_SET_MODEM_STATUS;
2814 mbox->cmd.length = 1;
2815 mbox->data[0] = 0;
2816 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2817 } while (err && retry--);
2818
2819 retry = MAX_CMD_RETRY;
2820
2821 do
2822 {
2823 mbox->cmd.command = FR_COMM_DISABLE;
2824 mbox->cmd.length = 0;
2825 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2826 } while (err && retry--);
2827
2828 return;
2829}
2830
2831
2832
2833/*============================================================================
2834 * Get communications error statistics.
2835 */
2836static int fr_get_err_stats (sdla_t* card)
2837{
2838 fr_mbox_t* mbox = card->mbox;
2839 int retry = MAX_CMD_RETRY;
2840 int err;
2841
2842
2843 do
2844 {
2845 mbox->cmd.command = FR_READ_ERROR_STATS;
2846 mbox->cmd.length = 0;
2847 mbox->cmd.dlci = 0;
2848 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2849 } while (err && retry-- && fr_event(card, err, mbox));
2850
2851 if (!err) {
2852 fr_comm_stat_t* stats = (void*)mbox->data;
2853 card->wandev.stats.rx_over_errors = stats->rx_overruns;
2854 card->wandev.stats.rx_crc_errors = stats->rx_bad_crc;
2855 card->wandev.stats.rx_missed_errors = stats->rx_aborts;
2856 card->wandev.stats.rx_length_errors = stats->rx_too_long;
2857 card->wandev.stats.tx_aborted_errors = stats->tx_aborts;
2858
2859 }
2860
2861 return err;
2862}
2863
2864/*============================================================================
2865 * Get statistics.
2866 */
2867static int fr_get_stats (sdla_t* card)
2868{
2869 fr_mbox_t* mbox = card->mbox;
2870 int retry = MAX_CMD_RETRY;
2871 int err;
2872
2873
2874 do
2875 {
2876 mbox->cmd.command = FR_READ_STATISTICS;
2877 mbox->cmd.length = 0;
2878 mbox->cmd.dlci = 0;
2879 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2880 } while (err && retry-- && fr_event(card, err, mbox));
2881
2882 if (!err) {
2883 fr_link_stat_t* stats = (void*)mbox->data;
2884 card->wandev.stats.rx_frame_errors = stats->rx_bad_format;
2885 card->wandev.stats.rx_dropped =
2886 stats->rx_dropped + stats->rx_dropped2;
2887 }
2888
2889 return err;
2890}
2891
2892/*============================================================================
2893 * Add DLCI(s) (Access Node only!).
2894 * This routine will perform the ADD_DLCIs command for the specified DLCI.
2895 */
2896static int fr_add_dlci (sdla_t* card, int dlci)
2897{
2898 fr_mbox_t* mbox = card->mbox;
2899 int retry = MAX_CMD_RETRY;
2900 int err;
2901
2902 do
2903 {
2904 unsigned short* dlci_list = (void*)mbox->data;
2905
2906 mbox->cmd.length = sizeof(short);
2907 dlci_list[0] = dlci;
2908 mbox->cmd.command = FR_ADD_DLCI;
2909 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2910
2911 } while (err && retry-- && fr_event(card, err, mbox));
2912
2913 return err;
2914}
2915
2916/*============================================================================
2917 * Activate DLCI(s) (Access Node only!).
2918 * This routine will perform the ACTIVATE_DLCIs command with a DLCI number.
2919 */
2920static int fr_activate_dlci (sdla_t* card, int dlci)
2921{
2922 fr_mbox_t* mbox = card->mbox;
2923 int retry = MAX_CMD_RETRY;
2924 int err;
2925
2926 do
2927 {
2928 unsigned short* dlci_list = (void*)mbox->data;
2929
2930 mbox->cmd.length = sizeof(short);
2931 dlci_list[0] = dlci;
2932 mbox->cmd.command = FR_ACTIVATE_DLCI;
2933 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2934
2935 } while (err && retry-- && fr_event(card, err, mbox));
2936
2937 return err;
2938}
2939
2940/*============================================================================
2941 * Delete DLCI(s) (Access Node only!).
2942 * This routine will perform the DELETE_DLCIs command with a DLCI number.
2943 */
2944static int fr_delete_dlci (sdla_t* card, int dlci)
2945{
2946 fr_mbox_t* mbox = card->mbox;
2947 int retry = MAX_CMD_RETRY;
2948 int err;
2949
2950 do
2951 {
2952 unsigned short* dlci_list = (void*)mbox->data;
2953
2954 mbox->cmd.length = sizeof(short);
2955 dlci_list[0] = dlci;
2956 mbox->cmd.command = FR_DELETE_DLCI;
2957 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2958
2959 } while (err && retry-- && fr_event(card, err, mbox));
2960
2961 return err;
2962}
2963
2964
2965
2966/*============================================================================
2967 * Issue in-channel signalling frame.
2968 */
2969static int fr_issue_isf (sdla_t* card, int isf)
2970{
2971 fr_mbox_t* mbox = card->mbox;
2972 int retry = MAX_CMD_RETRY;
2973 int err;
2974
2975 do
2976 {
2977 mbox->data[0] = isf;
2978 mbox->cmd.length = 1;
2979 mbox->cmd.command = FR_ISSUE_IS_FRAME;
2980 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2981 } while (err && retry-- && fr_event(card, err, mbox));
2982
2983 return err;
2984}
2985
2986
2987static unsigned int fr_send_hdr (sdla_t*card, int dlci, unsigned int offset)
2988{
2989 struct net_device *dev = find_channel(card,dlci);
2990 fr_channel_t *chan;
2991
2992 if (!dev || !(chan=dev->priv))
2993 return offset;
2994
2995 if (chan->fr_header_len){
2996 sdla_poke(&card->hw, offset, chan->fr_header, chan->fr_header_len);
2997 }
2998
2999 return offset+chan->fr_header_len;
3000}
3001
3002/*============================================================================
3003 * Send a frame on a selected DLCI.
3004 */
3005static int fr_send_data_header (sdla_t* card, int dlci, unsigned char attr, int len,
3006 void *buf, unsigned char hdr_len)
3007{
3008 fr_mbox_t* mbox = card->mbox + 0x800;
3009 int retry = MAX_CMD_RETRY;
3010 int err;
3011
3012 do
3013 {
3014 mbox->cmd.dlci = dlci;
3015 mbox->cmd.attr = attr;
3016 mbox->cmd.length = len+hdr_len;
3017 mbox->cmd.command = FR_WRITE;
3018 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
3019 } while (err && retry-- && fr_event(card, err, mbox));
3020
3021 if (!err) {
3022 fr_tx_buf_ctl_t* frbuf;
3023
3024 if(card->hw.type == SDLA_S514)
3025 frbuf = (void*)(*(unsigned long*)mbox->data +
3026 card->hw.dpmbase);
3027 else
3028 frbuf = (void*)(*(unsigned long*)mbox->data -
3029 FR_MB_VECTOR + card->hw.dpmbase);
3030
3031 sdla_poke(&card->hw, fr_send_hdr(card,dlci,frbuf->offset), buf, len);
3032 frbuf->flag = 0x01;
3033 }
3034
3035 return err;
3036}
3037
3038static int fr_send (sdla_t* card, int dlci, unsigned char attr, int len,
3039 void *buf)
3040{
3041 fr_mbox_t* mbox = card->mbox + 0x800;
3042 int retry = MAX_CMD_RETRY;
3043 int err;
3044
3045 do
3046 {
3047 mbox->cmd.dlci = dlci;
3048 mbox->cmd.attr = attr;
3049 mbox->cmd.length = len;
3050 mbox->cmd.command = FR_WRITE;
3051 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
3052 } while (err && retry-- && fr_event(card, err, mbox));
3053
3054 if (!err) {
3055 fr_tx_buf_ctl_t* frbuf;
3056
3057 if(card->hw.type == SDLA_S514)
3058 frbuf = (void*)(*(unsigned long*)mbox->data +
3059 card->hw.dpmbase);
3060 else
3061 frbuf = (void*)(*(unsigned long*)mbox->data -
3062 FR_MB_VECTOR + card->hw.dpmbase);
3063
3064 sdla_poke(&card->hw, frbuf->offset, buf, len);
3065 frbuf->flag = 0x01;
3066 }
3067
3068 return err;
3069}
3070
3071
3072/****** Firmware Asynchronous Event Handlers ********************************/
3073
3074/*============================================================================
3075 * Main asyncronous event/error handler.
3076 * This routine is called whenever firmware command returns non-zero
3077 * return code.
3078 *
3079 * Return zero if previous command has to be cancelled.
3080 */
3081static int fr_event (sdla_t *card, int event, fr_mbox_t* mbox)
3082{
3083 fr508_flags_t* flags = card->flags;
3084 char *ptr = &flags->iflag;
3085 int i;
3086
3087 switch (event) {
3088
3089 case FRRES_MODEM_FAILURE:
3090 return fr_modem_failure(card, mbox);
3091
3092 case FRRES_CHANNEL_DOWN: {
3093 struct net_device *dev;
3094
3095 /* Remove all routes from associated DLCI's */
3096 for (dev = card->wandev.dev; dev;
3097 dev = *((struct net_device **)dev->priv)) {
3098 fr_channel_t *chan = dev->priv;
3099 if (chan->route_flag == ROUTE_ADDED) {
3100 chan->route_flag = REMOVE_ROUTE;
3101 }
3102
3103 if (chan->inarp == INARP_CONFIGURED) {
3104 chan->inarp = INARP_REQUEST;
3105 }
3106
3107 /* If the link becomes disconnected then,
3108 * all channels will be disconnected
3109 * as well.
3110 */
3111 set_chan_state(dev,WAN_DISCONNECTED);
3112 }
3113
3114 wanpipe_set_state(card, WAN_DISCONNECTED);
3115 return 1;
3116 }
3117
3118 case FRRES_CHANNEL_UP: {
3119 struct net_device *dev;
3120
3121 /* FIXME: Only startup devices that are on the list */
3122
3123 for (dev = card->wandev.dev; dev;
3124 dev = *((struct net_device **)dev->priv)) {
3125
3126 set_chan_state(dev,WAN_CONNECTED);
3127 }
3128
3129 wanpipe_set_state(card, WAN_CONNECTED);
3130 return 1;
3131 }
3132
3133 case FRRES_DLCI_CHANGE:
3134 return fr_dlci_change(card, mbox);
3135
3136 case FRRES_DLCI_MISMATCH:
3137 printk(KERN_INFO "%s: DLCI list mismatch!\n",
3138 card->devname);
3139 return 1;
3140
3141 case CMD_TIMEOUT:
3142 printk(KERN_ERR "%s: command 0x%02X timed out!\n",
3143 card->devname, mbox->cmd.command);
3144 printk(KERN_INFO "%s: ID Bytes = ",card->devname);
3145 for(i = 0; i < 8; i ++)
3146 printk(KERN_INFO "0x%02X ", *(ptr + 0x18 + i));
3147 printk(KERN_INFO "\n");
3148
3149 break;
3150
3151 case FRRES_DLCI_INACTIVE:
3152 break;
3153
3154 case FRRES_CIR_OVERFLOW:
3155 break;
3156
3157 case FRRES_BUFFER_OVERFLOW:
3158 break;
3159
3160 default:
3161 printk(KERN_INFO "%s: command 0x%02X returned 0x%02X!\n"
3162 , card->devname, mbox->cmd.command, event);
3163 }
3164
3165 return 0;
3166}
3167
3168/*============================================================================
3169 * Handle modem error.
3170 *
3171 * Return zero if previous command has to be cancelled.
3172 */
3173static int fr_modem_failure (sdla_t *card, fr_mbox_t* mbox)
3174{
3175 printk(KERN_INFO "%s: physical link down! (modem error 0x%02X)\n",
3176 card->devname, mbox->data[0]);
3177
3178 switch (mbox->cmd.command){
3179 case FR_WRITE:
3180
3181 case FR_READ:
3182 return 0;
3183 }
3184
3185 return 1;
3186}
3187
3188/*============================================================================
3189 * Handle DLCI status change.
3190 *
3191 * Return zero if previous command has to be cancelled.
3192 */
3193static int fr_dlci_change (sdla_t *card, fr_mbox_t* mbox)
3194{
3195 dlci_status_t* status = (void*)mbox->data;
3196 int cnt = mbox->cmd.length / sizeof(dlci_status_t);
3197 fr_channel_t *chan;
3198 struct net_device* dev2;
3199
3200
3201 for (; cnt; --cnt, ++status) {
3202
3203 unsigned short dlci= status->dlci;
3204 struct net_device* dev = find_channel(card, dlci);
3205
3206 if (dev == NULL){
3207 printk(KERN_INFO
3208 "%s: CPE contains unconfigured DLCI= %d\n",
3209 card->devname, dlci);
3210
3211 printk(KERN_INFO
3212 "%s: unconfigured DLCI %d reported by network\n"
3213 , card->devname, dlci);
3214
3215 }else{
3216 if (status->state == FR_LINK_INOPER) {
3217 printk(KERN_INFO
3218 "%s: DLCI %u is inactive!\n",
3219 card->devname, dlci);
3220
3221 if (dev && netif_running(dev))
3222 set_chan_state(dev, WAN_DISCONNECTED);
3223 }
3224
3225 if (status->state & FR_DLCI_DELETED) {
3226
3227 printk(KERN_INFO
3228 "%s: DLCI %u has been deleted!\n",
3229 card->devname, dlci);
3230
3231 if (dev && netif_running(dev)){
3232
3233 fr_channel_t *chan = dev->priv;
3234
3235 if (chan->route_flag == ROUTE_ADDED) {
3236 chan->route_flag = REMOVE_ROUTE;
3237 /* The state change will trigger
3238 * the fr polling routine */
3239 }
3240
3241 if (chan->inarp == INARP_CONFIGURED) {
3242 chan->inarp = INARP_REQUEST;
3243 }
3244
3245 set_chan_state(dev, WAN_DISCONNECTED);
3246 }
3247
3248 } else if (status->state & FR_DLCI_ACTIVE) {
3249
3250 chan = dev->priv;
3251
3252 /* This flag is used for configuring specific
3253 DLCI(s) when they become active.
3254 */
3255 chan->dlci_configured = DLCI_CONFIG_PENDING;
3256
3257 set_chan_state(dev, WAN_CONNECTED);
3258
3259 }
3260 }
3261 }
3262
3263 for (dev2 = card->wandev.dev; dev2;
3264 dev2 = *((struct net_device **)dev2->priv)){
3265
3266 chan = dev2->priv;
3267
3268 if (chan->dlci_configured == DLCI_CONFIG_PENDING) {
3269 if (fr_init_dlci(card, chan)){
3270 return 1;
3271 }
3272 }
3273
3274 }
3275 return 1;
3276}
3277
3278
3279static int fr_init_dlci (sdla_t *card, fr_channel_t *chan)
3280{
3281 fr_dlc_conf_t cfg;
3282
3283 memset(&cfg, 0, sizeof(cfg));
3284
3285 if ( chan->cir_status == CIR_DISABLED) {
3286
3287 cfg.cir_fwd = cfg.cir_bwd = 16;
3288 cfg.bc_fwd = cfg.bc_bwd = 16;
3289 cfg.conf_flags = 0x0001;
3290
3291 }else if (chan->cir_status == CIR_ENABLED) {
3292
3293 cfg.cir_fwd = cfg.cir_bwd = chan->cir;
3294 cfg.bc_fwd = cfg.bc_bwd = chan->bc;
3295 cfg.be_fwd = cfg.be_bwd = chan->be;
3296 cfg.conf_flags = 0x0000;
3297 }
3298
3299 if (fr_dlci_configure( card, &cfg , chan->dlci)){
3300 printk(KERN_INFO
3301 "%s: DLCI Configure failed for %d\n",
3302 card->devname, chan->dlci);
3303 return 1;
3304 }
3305
3306 chan->dlci_configured = DLCI_CONFIGURED;
3307
3308 /* Read the interface byte mapping into the channel
3309 * structure.
3310 */
3311 read_DLCI_IB_mapping( card, chan );
3312
3313 return 0;
3314}
3315/******* Miscellaneous ******************************************************/
3316
3317/*============================================================================
3318 * Update channel state.
3319 */
3320static int update_chan_state(struct net_device* dev)
3321{
3322 fr_channel_t* chan = dev->priv;
3323 sdla_t* card = chan->card;
3324 fr_mbox_t* mbox = card->mbox;
3325 int retry = MAX_CMD_RETRY;
3326 int err;
3327
3328 do
3329 {
3330 mbox->cmd.command = FR_LIST_ACTIVE_DLCI;
3331 mbox->cmd.length = 0;
3332 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
3333 } while (err && retry-- && fr_event(card, err, mbox));
3334
3335 if (!err) {
3336
3337 unsigned short* list = (void*)mbox->data;
3338 int cnt = mbox->cmd.length / sizeof(short);
3339
3340 err=1;
3341
3342 for (; cnt; --cnt, ++list) {
3343
3344 if (*list == chan->dlci) {
3345 set_chan_state(dev, WAN_CONNECTED);
3346
3347
3348 /* May 23 2000. NC
3349 * When a dlci is added or restarted,
3350 * the dlci_int_interface pointer must
3351 * be reinitialized. */
3352 if (!chan->dlci_int_interface){
3353 err=fr_init_dlci (card,chan);
3354 }
3355 break;
3356 }
3357 }
3358 }
3359
3360 return err;
3361}
3362
3363/*============================================================================
3364 * Set channel state.
3365 */
3366static void set_chan_state(struct net_device* dev, int state)
3367{
3368 fr_channel_t* chan = dev->priv;
3369 sdla_t* card = chan->card;
3370
3371 if (chan->common.state != state) {
3372
3373 switch (state) {
3374
3375 case WAN_CONNECTED:
3376 printk(KERN_INFO
3377 "%s: Interface %s: DLCI %d connected\n",
3378 card->devname, dev->name, chan->dlci);
3379
3380 /* If the interface was previoulsy down,
3381 * bring it up, since the channel is active */
3382
3383 trigger_fr_poll (dev);
3384 trigger_fr_arp (dev);
3385 break;
3386
3387 case WAN_CONNECTING:
3388 printk(KERN_INFO
3389 "%s: Interface %s: DLCI %d connecting\n",
3390 card->devname, dev->name, chan->dlci);
3391 break;
3392
3393 case WAN_DISCONNECTED:
3394 printk (KERN_INFO
3395 "%s: Interface %s: DLCI %d disconnected!\n",
3396 card->devname, dev->name, chan->dlci);
3397
3398 /* If the interface is up, bring it down,
3399 * since the channel is now disconnected */
3400 trigger_fr_poll (dev);
3401 break;
3402 }
3403
3404 chan->common.state = state;
3405 }
3406
3407 chan->state_tick = jiffies;
3408}
3409
3410/*============================================================================
3411 * Find network device by its channel number.
3412 *
3413 * We need this critical flag because we change
3414 * the dlci_to_dev_map outside the interrupt.
3415 *
3416 * NOTE: del_if() functions updates this array, it uses
3417 * the spin locks to avoid corruption.
3418 */
3419static struct net_device* find_channel(sdla_t* card, unsigned dlci)
3420{
3421 if(dlci > HIGHEST_VALID_DLCI)
3422 return NULL;
3423
3424 return(card->u.f.dlci_to_dev_map[dlci]);
3425}
3426
3427/*============================================================================
3428 * Check to see if a frame can be sent. If no transmit buffers available,
3429 * enable transmit interrupts.
3430 *
3431 * Return: 1 - Tx buffer(s) available
3432 * 0 - no buffers available
3433 */
3434static int is_tx_ready (sdla_t* card, fr_channel_t* chan)
3435{
3436 unsigned char sb;
3437
3438 if(card->hw.type == SDLA_S514)
3439 return 1;
3440
3441 sb = inb(card->hw.port);
3442 if (sb & 0x02)
3443 return 1;
3444
3445 return 0;
3446}
3447
3448/*============================================================================
3449 * Convert decimal string to unsigned integer.
3450 * If len != 0 then only 'len' characters of the string are converted.
3451 */
3452static unsigned int dec_to_uint (unsigned char* str, int len)
3453{
3454 unsigned val;
3455
3456 if (!len)
3457 len = strlen(str);
3458
3459 for (val = 0; len && isdigit(*str); ++str, --len)
3460 val = (val * 10) + (*str - (unsigned)'0');
3461
3462 return val;
3463}
3464
3465
3466
3467/*=============================================================================
3468 * Store a UDP management packet for later processing.
3469 */
3470
3471static int store_udp_mgmt_pkt(int udp_type, char udp_pkt_src, sdla_t* card,
3472 struct sk_buff *skb, int dlci)
3473{
3474 int udp_pkt_stored = 0;
3475
3476 struct net_device *dev = find_channel(card, dlci);
3477 fr_channel_t *chan;
3478
3479 if (!dev || !(chan=dev->priv))
3480 return 1;
3481
3482 if(!card->u.f.udp_pkt_lgth && (skb->len <= MAX_LGTH_UDP_MGNT_PKT)){
3483 card->u.f.udp_pkt_lgth = skb->len + chan->fr_header_len;
3484 card->u.f.udp_type = udp_type;
3485 card->u.f.udp_pkt_src = udp_pkt_src;
3486 card->u.f.udp_dlci = dlci;
3487 memcpy(card->u.f.udp_pkt_data, skb->data, skb->len);
3488 card->u.f.timer_int_enabled |= TMR_INT_ENABLED_UDP;
3489 udp_pkt_stored = 1;
3490
3491 }else{
3492 printk(KERN_INFO "ERROR: UDP packet not stored for DLCI %d\n",
3493 dlci);
3494 }
3495
3496 if(udp_pkt_src == UDP_PKT_FRM_STACK){
3497 dev_kfree_skb_any(skb);
3498 }else{
3499 dev_kfree_skb_any(skb);
3500 }
3501
3502 return(udp_pkt_stored);
3503}
3504
3505
3506/*==============================================================================
3507 * Process UDP call of type FPIPE8ND
3508 */
3509static int process_udp_mgmt_pkt(sdla_t* card)
3510{
3511
3512 int c_retry = MAX_CMD_RETRY;
3513 unsigned char *buf;
3514 unsigned char frames;
3515 unsigned int len;
3516 unsigned short buffer_length;
3517 struct sk_buff *new_skb;
3518 fr_mbox_t* mbox = card->mbox;
3519 int err;
3520 struct timeval tv;
3521 int udp_mgmt_req_valid = 1;
3522 struct net_device* dev;
3523 fr_channel_t* chan;
3524 fr_udp_pkt_t *fr_udp_pkt;
3525 unsigned short num_trc_els;
3526 fr_trc_el_t* ptr_trc_el;
3527 fr_trc_el_t trc_el;
3528 fpipemon_trc_t* fpipemon_trc;
3529
3530 char udp_pkt_src = card->u.f.udp_pkt_src;
3531 int dlci = card->u.f.udp_dlci;
3532
3533 /* Find network interface for this packet */
3534 dev = find_channel(card, dlci);
3535 if (!dev){
3536 card->u.f.udp_pkt_lgth = 0;
3537 return 1;
3538 }
3539 if ((chan = dev->priv) == NULL){
3540 card->u.f.udp_pkt_lgth = 0;
3541 return 1;
3542 }
3543
3544 /* If the UDP packet is from the network, we are going to have to
3545 transmit a response. Before doing so, we must check to see that
3546 we are not currently transmitting a frame (in 'if_send()') and
3547 that we are not already in a 'delayed transmit' state.
3548 */
3549 if(udp_pkt_src == UDP_PKT_FRM_NETWORK) {
3550 if (check_tx_status(card,dev)){
3551 card->u.f.udp_pkt_lgth = 0;
3552 return 1;
3553 }
3554 }
3555
3556 fr_udp_pkt = (fr_udp_pkt_t *)card->u.f.udp_pkt_data;
3557
3558 if(udp_pkt_src == UDP_PKT_FRM_NETWORK) {
3559
3560 switch(fr_udp_pkt->cblock.command) {
3561
3562 case FR_READ_MODEM_STATUS:
3563 case FR_READ_STATUS:
3564 case FPIPE_ROUTER_UP_TIME:
3565 case FR_READ_ERROR_STATS:
3566 case FPIPE_DRIVER_STAT_GEN:
3567 case FR_READ_STATISTICS:
3568 case FR_READ_ADD_DLC_STATS:
3569 case FR_READ_CONFIG:
3570 case FR_READ_CODE_VERSION:
3571 udp_mgmt_req_valid = 1;
3572 break;
3573 default:
3574 udp_mgmt_req_valid = 0;
3575 break;
3576 }
3577 }
3578
3579 if(!udp_mgmt_req_valid) {
3580 /* set length to 0 */
3581 fr_udp_pkt->cblock.length = 0;
3582 /* set return code */
3583 fr_udp_pkt->cblock.result = 0xCD;
3584
3585 chan->drvstats_gen.UDP_PIPE_mgmt_direction_err ++;
3586
3587 if (net_ratelimit()){
3588 printk(KERN_INFO
3589 "%s: Warning, Illegal UDP command attempted from network: %x\n",
3590 card->devname,fr_udp_pkt->cblock.command);
3591 }
3592
3593 } else {
3594
3595 switch(fr_udp_pkt->cblock.command) {
3596
3597 case FPIPE_ENABLE_TRACING:
3598 if(!card->TracingEnabled) {
3599 do {
3600 mbox->cmd.command = FR_SET_TRACE_CONFIG;
3601 mbox->cmd.length = 1;
3602 mbox->cmd.dlci = 0x00;
3603 mbox->data[0] = fr_udp_pkt->data[0] |
3604 RESET_TRC;
3605 err = sdla_exec(mbox) ?
3606 mbox->cmd.result : CMD_TIMEOUT;
3607 } while (err && c_retry-- && fr_event(card, err,
3608 mbox));
3609
3610 if(err) {
3611 card->TracingEnabled = 0;
3612 /* set the return code */
3613 fr_udp_pkt->cblock.result =
3614 mbox->cmd.result;
3615 mbox->cmd.length = 0;
3616 break;
3617 }
3618
3619 sdla_peek(&card->hw, NO_TRC_ELEMENTS_OFF,
3620 &num_trc_els, 2);
3621 sdla_peek(&card->hw, BASE_TRC_ELEMENTS_OFF,
3622 &card->u.f.trc_el_base, 4);
3623 card->u.f.curr_trc_el = card->u.f.trc_el_base;
3624 card->u.f.trc_el_last = card->u.f.curr_trc_el +
3625 ((num_trc_els - 1) *
3626 sizeof(fr_trc_el_t));
3627
3628 /* Calculate the maximum trace data area in */
3629 /* the UDP packet */
3630 card->u.f.trc_bfr_space=(MAX_LGTH_UDP_MGNT_PKT -
3631 //sizeof(fr_encap_hdr_t) -
3632 sizeof(ip_pkt_t) -
3633 sizeof(udp_pkt_t) -
3634 sizeof(wp_mgmt_t) -
3635 sizeof(cblock_t));
3636
3637 /* set return code */
3638 fr_udp_pkt->cblock.result = 0;
3639
3640 } else {
3641 /* set return code to line trace already
3642 enabled */
3643 fr_udp_pkt->cblock.result = 1;
3644 }
3645
3646 mbox->cmd.length = 0;
3647 card->TracingEnabled = 1;
3648 break;
3649
3650
3651 case FPIPE_DISABLE_TRACING:
3652 if(card->TracingEnabled) {
3653
3654 do {
3655 mbox->cmd.command = FR_SET_TRACE_CONFIG;
3656 mbox->cmd.length = 1;
3657 mbox->cmd.dlci = 0x00;
3658 mbox->data[0] = ~ACTIVATE_TRC;
3659 err = sdla_exec(mbox) ?
3660 mbox->cmd.result : CMD_TIMEOUT;
3661 } while (err && c_retry-- && fr_event(card, err, mbox));
3662 }
3663
3664 /* set return code */
3665 fr_udp_pkt->cblock.result = 0;
3666 mbox->cmd.length = 0;
3667 card->TracingEnabled = 0;
3668 break;
3669
3670 case FPIPE_GET_TRACE_INFO:
3671
3672 /* Line trace cannot be performed on the 502 */
3673 if(!card->TracingEnabled) {
3674 /* set return code */
3675 fr_udp_pkt->cblock.result = 1;
3676 mbox->cmd.length = 0;
3677 break;
3678 }
3679
3680 ptr_trc_el = (void *)card->u.f.curr_trc_el;
3681
3682 buffer_length = 0;
3683 fr_udp_pkt->data[0x00] = 0x00;
3684
3685 for(frames = 0; frames < MAX_FRMS_TRACED; frames ++) {
3686
3687 sdla_peek(&card->hw, (unsigned long)ptr_trc_el,
3688 (void *)&trc_el.flag,
3689 sizeof(fr_trc_el_t));
3690 if(trc_el.flag == 0x00) {
3691 break;
3692 }
3693 if((card->u.f.trc_bfr_space - buffer_length)
3694 < sizeof(fpipemon_trc_hdr_t)) {
3695 fr_udp_pkt->data[0x00] |= MORE_TRC_DATA;
3696 break;
3697 }
3698
3699 fpipemon_trc =
3700 (fpipemon_trc_t *)&fr_udp_pkt->data[buffer_length];
3701 fpipemon_trc->fpipemon_trc_hdr.status =
3702 trc_el.attr;
3703 fpipemon_trc->fpipemon_trc_hdr.tmstamp =
3704 trc_el.tmstamp;
3705 fpipemon_trc->fpipemon_trc_hdr.length =
3706 trc_el.length;
3707
3708 if(!trc_el.offset || !trc_el.length) {
3709
3710 fpipemon_trc->fpipemon_trc_hdr.data_passed = 0x00;
3711
3712 }else if((trc_el.length + sizeof(fpipemon_trc_hdr_t) + 1) >
3713 (card->u.f.trc_bfr_space - buffer_length)){
3714
3715 fpipemon_trc->fpipemon_trc_hdr.data_passed = 0x00;
3716 fr_udp_pkt->data[0x00] |= MORE_TRC_DATA;
3717
3718 }else {
3719 fpipemon_trc->fpipemon_trc_hdr.data_passed = 0x01;
3720 sdla_peek(&card->hw, trc_el.offset,
3721 fpipemon_trc->data,
3722 trc_el.length);
3723 }
3724
3725 trc_el.flag = 0x00;
3726 sdla_poke(&card->hw, (unsigned long)ptr_trc_el,
3727 &trc_el.flag, 1);
3728
3729 ptr_trc_el ++;
3730 if((void *)ptr_trc_el > card->u.f.trc_el_last)
3731 ptr_trc_el = (void*)card->u.f.trc_el_base;
3732
3733 buffer_length += sizeof(fpipemon_trc_hdr_t);
3734 if(fpipemon_trc->fpipemon_trc_hdr.data_passed) {
3735 buffer_length += trc_el.length;
3736 }
3737
3738 if(fr_udp_pkt->data[0x00] & MORE_TRC_DATA) {
3739 break;
3740 }
3741 }
3742
3743 if(frames == MAX_FRMS_TRACED) {
3744 fr_udp_pkt->data[0x00] |= MORE_TRC_DATA;
3745 }
3746
3747 card->u.f.curr_trc_el = (void *)ptr_trc_el;
3748
3749 /* set the total number of frames passed */
3750 fr_udp_pkt->data[0x00] |=
3751 ((frames << 1) & (MAX_FRMS_TRACED << 1));
3752
3753 /* set the data length and return code */
3754 fr_udp_pkt->cblock.length = mbox->cmd.length = buffer_length;
3755 fr_udp_pkt->cblock.result = 0;
3756 break;
3757
3758 case FPIPE_FT1_READ_STATUS:
3759 sdla_peek(&card->hw, 0xF020,
3760 &fr_udp_pkt->data[0x00] , 2);
3761 fr_udp_pkt->cblock.length = mbox->cmd.length = 2;
3762 fr_udp_pkt->cblock.result = 0;
3763 break;
3764
3765 case FPIPE_FLUSH_DRIVER_STATS:
3766 init_chan_statistics(chan);
3767 init_global_statistics(card);
3768 mbox->cmd.length = 0;
3769 break;
3770
3771 case FPIPE_ROUTER_UP_TIME:
3772 do_gettimeofday(&tv);
3773 chan->router_up_time = tv.tv_sec -
3774 chan->router_start_time;
3775 *(unsigned long *)&fr_udp_pkt->data =
3776 chan->router_up_time;
3777 mbox->cmd.length = fr_udp_pkt->cblock.length = 4;
3778 fr_udp_pkt->cblock.result = 0;
3779 break;
3780
3781 case FPIPE_DRIVER_STAT_IFSEND:
3782 memcpy(fr_udp_pkt->data,
3783 &chan->drvstats_if_send.if_send_entry,
3784 sizeof(if_send_stat_t));
3785 mbox->cmd.length = fr_udp_pkt->cblock.length =sizeof(if_send_stat_t);
3786 fr_udp_pkt->cblock.result = 0;
3787 break;
3788
3789 case FPIPE_DRIVER_STAT_INTR:
3790
3791 memcpy(fr_udp_pkt->data,
3792 &card->statistics.isr_entry,
3793 sizeof(global_stats_t));
3794
3795 memcpy(&fr_udp_pkt->data[sizeof(global_stats_t)],
3796 &chan->drvstats_rx_intr.rx_intr_no_socket,
3797 sizeof(rx_intr_stat_t));
3798
3799 mbox->cmd.length = fr_udp_pkt->cblock.length =
3800 sizeof(global_stats_t) +
3801 sizeof(rx_intr_stat_t);
3802 fr_udp_pkt->cblock.result = 0;
3803 break;
3804
3805 case FPIPE_DRIVER_STAT_GEN:
3806 memcpy(fr_udp_pkt->data,
3807 &chan->drvstats_gen.UDP_PIPE_mgmt_kmalloc_err,
3808 sizeof(pipe_mgmt_stat_t));
3809
3810 memcpy(&fr_udp_pkt->data[sizeof(pipe_mgmt_stat_t)],
3811 &card->statistics, sizeof(global_stats_t));
3812
3813 mbox->cmd.length = fr_udp_pkt->cblock.length = sizeof(global_stats_t)+
3814 sizeof(rx_intr_stat_t);
3815 fr_udp_pkt->cblock.result = 0;
3816 break;
3817
3818
3819 case FR_FT1_STATUS_CTRL:
3820 if(fr_udp_pkt->data[0] == 1) {
3821 if(rCount++ != 0 ){
3822 fr_udp_pkt->cblock.result = 0;
3823 mbox->cmd.length = 1;
3824 break;
3825 }
3826 }
3827
3828 /* Disable FT1 MONITOR STATUS */
3829 if(fr_udp_pkt->data[0] == 0) {
3830 if( --rCount != 0) {
3831 fr_udp_pkt->cblock.result = 0;
3832 mbox->cmd.length = 1;
3833 break;
3834 }
3835 }
3836 goto udp_mgmt_dflt;
3837
3838
3839 default:
3840udp_mgmt_dflt:
3841 do {
3842 memcpy(&mbox->cmd,
3843 &fr_udp_pkt->cblock.command,
3844 sizeof(fr_cmd_t));
3845 if(mbox->cmd.length) {
3846 memcpy(&mbox->data,
3847 (char *)fr_udp_pkt->data,
3848 mbox->cmd.length);
3849 }
3850
3851 err = sdla_exec(mbox) ? mbox->cmd.result :
3852 CMD_TIMEOUT;
3853 } while (err && c_retry-- && fr_event(card, err, mbox));
3854
3855 if(!err)
3856 chan->drvstats_gen.
3857 UDP_PIPE_mgmt_adptr_cmnd_OK ++;
3858 else
3859 chan->drvstats_gen.
3860 UDP_PIPE_mgmt_adptr_cmnd_timeout ++;
3861
3862 /* copy the result back to our buffer */
3863 memcpy(&fr_udp_pkt->cblock.command,
3864 &mbox->cmd, sizeof(fr_cmd_t));
3865
3866 if(mbox->cmd.length) {
3867 memcpy(&fr_udp_pkt->data,
3868 &mbox->data, mbox->cmd.length);
3869 }
3870 }
3871 }
3872
3873 /* Fill UDP TTL */
3874 fr_udp_pkt->ip_pkt.ttl = card->wandev.ttl;
3875 len = reply_udp(card->u.f.udp_pkt_data, mbox->cmd.length);
3876
3877 if(udp_pkt_src == UDP_PKT_FRM_NETWORK) {
3878
3879 chan->fr_header_len=2;
3880 chan->fr_header[0]=Q922_UI;
3881 chan->fr_header[1]=NLPID_IP;
3882
3883 err = fr_send_data_header(card, dlci, 0, len,
3884 card->u.f.udp_pkt_data,chan->fr_header_len);
3885 if (err){
3886 chan->drvstats_gen.UDP_PIPE_mgmt_adptr_send_passed ++;
3887 }else{
3888 chan->drvstats_gen.UDP_PIPE_mgmt_adptr_send_failed ++;
3889 }
3890
3891 } else {
3892 /* Allocate socket buffer */
3893 if((new_skb = dev_alloc_skb(len)) != NULL) {
3894
3895 /* copy data into new_skb */
3896 buf = skb_put(new_skb, len);
3897 memcpy(buf, card->u.f.udp_pkt_data, len);
3898
3899 chan->drvstats_gen.
3900 UDP_PIPE_mgmt_passed_to_stack ++;
3901 new_skb->dev = dev;
3902 new_skb->protocol = htons(ETH_P_IP);
3903 new_skb->mac.raw = new_skb->data;
3904 netif_rx(new_skb);
3905
3906 } else {
3907 chan->drvstats_gen.UDP_PIPE_mgmt_no_socket ++;
3908 printk(KERN_INFO
3909 "%s: UDP mgmt cmnd, no socket buffers available!\n",
3910 card->devname);
3911 }
3912 }
3913
3914 card->u.f.udp_pkt_lgth = 0;
3915
3916 return 1;
3917}
3918
3919/*==============================================================================
3920 * Send Inverse ARP Request
3921 */
3922
3923int send_inarp_request(sdla_t *card, struct net_device *dev)
3924{
3925 int err=0;
3926
3927 arphdr_1490_t *ArpPacket;
3928 arphdr_fr_t *arphdr;
3929 fr_channel_t *chan = dev->priv;
3930 struct in_device *in_dev;
3931
3932 in_dev = dev->ip_ptr;
3933
3934 if(in_dev != NULL ) {
3935
3936 ArpPacket = kmalloc(sizeof(arphdr_1490_t) + sizeof(arphdr_fr_t), GFP_ATOMIC);
3937 /* SNAP Header indicating ARP */
3938 ArpPacket->control = 0x03;
3939 ArpPacket->pad = 0x00;
3940 ArpPacket->NLPID = 0x80;
3941 ArpPacket->OUI[0] = 0;
3942 ArpPacket->OUI[1] = 0;
3943 ArpPacket->OUI[2] = 0;
3944 ArpPacket->PID = 0x0608;
3945
3946 arphdr = (arphdr_fr_t *)(ArpPacket + 1); // Go to ARP Packet
3947
3948 /* InARP request */
3949 arphdr->ar_hrd = 0x0F00; /* Frame Relay HW type */
3950 arphdr->ar_pro = 0x0008; /* IP Protocol */
3951 arphdr->ar_hln = 2; /* HW addr length */
3952 arphdr->ar_pln = 4; /* IP addr length */
3953 arphdr->ar_op = htons(0x08); /* InARP Request */
3954 arphdr->ar_sha = 0; /* src HW DLCI - Doesn't matter */
3955 if(in_dev->ifa_list != NULL)
3956 arphdr->ar_sip = in_dev->ifa_list->ifa_local; /* Local Address */else
3957 arphdr->ar_sip = 0;
3958 arphdr->ar_tha = 0; /* dst HW DLCI - Doesn't matter */
3959 arphdr->ar_tip = 0; /* Remote Address -- what we want */
3960
3961 err = fr_send(card, chan->dlci, 0, sizeof(arphdr_1490_t) + sizeof(arphdr_fr_t),
3962 (void *)ArpPacket);
3963
3964 if (!err){
3965 printk(KERN_INFO "\n%s: Sending InARP request on DLCI %d.\n",
3966 card->devname, chan->dlci);
3967 clear_bit(ARP_CRIT,&card->wandev.critical);
3968 }
3969
3970 kfree(ArpPacket);
3971 }else{
3972 printk(KERN_INFO "%s: INARP ERROR: %s doesn't have a local IP address!\n",
3973 card->devname,dev->name);
3974 return 1;
3975 }
3976
3977 return 0;
3978}
3979
3980
3981/*==============================================================================
3982 * Check packet for ARP Type
3983 */
3984
3985int is_arp(void *buf)
3986{
3987 arphdr_1490_t *arphdr = (arphdr_1490_t *)buf;
3988
3989 if (arphdr->pad == 0x00 &&
3990 arphdr->NLPID == 0x80 &&
3991 arphdr->PID == 0x0608)
3992 return 1;
3993 else return 0;
3994}
3995
3996/*==============================================================================
3997 * Process ARP Packet Type
3998 */
3999
4000int process_ARP(arphdr_1490_t *ArpPacket, sdla_t *card, struct net_device* dev)
4001{
4002
4003
4004 arphdr_fr_t *arphdr = (arphdr_fr_t *)(ArpPacket + 1); /* Skip header */
4005 fr_rx_buf_ctl_t* frbuf = card->rxmb;
4006 struct in_device *in_dev;
4007 fr_channel_t *chan = dev->priv;
4008
4009 /* Before we transmit ARP packet, we must check
4010 * to see that we are not currently transmitting a
4011 * frame (in 'if_send()') and that we are not
4012 * already in a 'delayed transmit' state. */
4013 if (check_tx_status(card,dev)){
4014 if (net_ratelimit()){
4015 printk(KERN_INFO "%s: Disabling comminication to process ARP\n",
4016 card->devname);
4017 }
4018 set_bit(ARP_CRIT,&card->wandev.critical);
4019 return 0;
4020 }
4021
4022 in_dev = dev->ip_ptr;
4023
4024 /* Check that IP addresses exist for our network address */
4025 if (in_dev == NULL || in_dev->ifa_list == NULL)
4026 return -1;
4027
4028 switch (ntohs(arphdr->ar_op)) {
4029
4030 case 0x08: // Inverse ARP request -- Send Reply, add route.
4031
4032 /* Check for valid Address */
4033 printk(KERN_INFO "%s: Recvd PtP addr -InArp Req: %u.%u.%u.%u\n",
4034 card->devname, NIPQUAD(arphdr->ar_sip));
4035
4036
4037 /* Check that the network address is the same as ours, only
4038 * if the netowrk mask is not 255.255.255.255. Otherwise
4039 * this check would not make sense */
4040
4041 if (in_dev->ifa_list->ifa_mask != 0xFFFFFFFF &&
4042 (in_dev->ifa_list->ifa_mask & arphdr->ar_sip) !=
4043 (in_dev->ifa_list->ifa_mask & in_dev->ifa_list->ifa_local)){
4044 printk(KERN_INFO
4045 "%s: Invalid PtP address. %u.%u.%u.%u InARP ignored.\n",
4046 card->devname,NIPQUAD(arphdr->ar_sip));
4047
4048 printk(KERN_INFO "%s: mask %u.%u.%u.%u\n",
4049 card->devname, NIPQUAD(in_dev->ifa_list->ifa_mask));
4050 printk(KERN_INFO "%s: local %u.%u.%u.%u\n",
4051 card->devname,NIPQUAD(in_dev->ifa_list->ifa_local));
4052 return -1;
4053 }
4054
4055 if (in_dev->ifa_list->ifa_local == arphdr->ar_sip){
4056 printk(KERN_INFO
4057 "%s: Local addr = PtP addr. InARP ignored.\n",
4058 card->devname);
4059 return -1;
4060 }
4061
4062 arphdr->ar_op = htons(0x09); /* InARP Reply */
4063
4064 /* Set addresses */
4065 arphdr->ar_tip = arphdr->ar_sip;
4066 arphdr->ar_sip = in_dev->ifa_list->ifa_local;
4067
4068 chan->ip_local = in_dev->ifa_list->ifa_local;
4069 chan->ip_remote = arphdr->ar_sip;
4070
4071 fr_send(card, frbuf->dlci, 0, frbuf->length, (void *)ArpPacket);
4072
4073 if (test_bit(ARP_CRIT,&card->wandev.critical)){
4074 if (net_ratelimit()){
4075 printk(KERN_INFO "%s: ARP Processed Enabling Communication!\n",
4076 card->devname);
4077 }
4078 }
4079 clear_bit(ARP_CRIT,&card->wandev.critical);
4080
4081 chan->ip_local = in_dev->ifa_list->ifa_local;
4082 chan->ip_remote = arphdr->ar_sip;
4083
4084 /* Add Route Flag */
4085 /* The route will be added in the polling routine so
4086 that it is not interrupt context. */
4087
4088 chan->route_flag = ADD_ROUTE;
4089 trigger_fr_poll (dev);
4090
4091 break;
4092
4093 case 0x09: // Inverse ARP reply
4094
4095 /* Check for valid Address */
4096 printk(KERN_INFO "%s: Recvd PtP addr %u.%u.%u.%u -InArp Reply\n",
4097 card->devname, NIPQUAD(arphdr->ar_sip));
4098
4099
4100 /* Compare network addresses, only if network mask
4101 * is not 255.255.255.255 It would not make sense
4102 * to perform this test if the mask was all 1's */
4103
4104 if (in_dev->ifa_list->ifa_mask != 0xffffffff &&
4105 (in_dev->ifa_list->ifa_mask & arphdr->ar_sip) !=
4106 (in_dev->ifa_list->ifa_mask & in_dev->ifa_list->ifa_local)) {
4107
4108 printk(KERN_INFO "%s: Invalid PtP address. InARP ignored.\n",
4109 card->devname);
4110 return -1;
4111 }
4112
4113 /* Make sure that the received IP address is not
4114 * the same as our own local address */
4115 if (in_dev->ifa_list->ifa_local == arphdr->ar_sip) {
4116 printk(KERN_INFO "%s: Local addr = PtP addr. InARP ignored.\n",
4117 card->devname);
4118 return -1;
4119 }
4120
4121 chan->ip_local = in_dev->ifa_list->ifa_local;
4122 chan->ip_remote = arphdr->ar_sip;
4123
4124 /* Add Route Flag */
4125 /* The route will be added in the polling routine so
4126 that it is not interrupt context. */
4127
4128 chan->route_flag = ADD_ROUTE;
4129 chan->inarp = INARP_CONFIGURED;
4130 trigger_fr_poll(dev);
4131
4132 break;
4133 default:
4134 break; // ARP's and RARP's -- Shouldn't happen.
4135 }
4136
4137 return 0;
4138}
4139
4140
4141/*============================================================
4142 * trigger_fr_arp
4143 *
4144 * Description:
4145 * Add an fr_arp() task into a arp
4146 * timer handler for a specific dlci/interface.
4147 * This will kick the fr_arp() routine
4148 * within the specified time interval.
4149 *
4150 * Usage:
4151 * This timer is used to send ARP requests at
4152 * certain time intervals.
4153 * Called by an interrupt to request an action
4154 * at a later date.
4155 */
4156
4157static void trigger_fr_arp(struct net_device *dev)
4158{
4159 fr_channel_t* chan = dev->priv;
4160
4161 mod_timer(&chan->fr_arp_timer, jiffies + chan->inarp_interval * HZ);
4162 return;
4163}
4164
4165
4166
4167/*==============================================================================
4168 * ARP Request Action
4169 *
4170 * This funciton is called by timer interrupt to send an arp request
4171 * to the remote end.
4172 */
4173
4174static void fr_arp (unsigned long data)
4175{
4176 struct net_device *dev = (struct net_device *)data;
4177 fr_channel_t *chan = dev->priv;
4178 volatile sdla_t *card = chan->card;
4179 fr508_flags_t* flags = card->flags;
4180
4181 /* Send ARP packets for all devs' until
4182 * ARP state changes to CONFIGURED */
4183
4184 if (chan->inarp == INARP_REQUEST &&
4185 chan->common.state == WAN_CONNECTED &&
4186 card->wandev.state == WAN_CONNECTED){
4187 set_bit(0,&chan->inarp_ready);
4188 card->u.f.timer_int_enabled |= TMR_INT_ENABLED_ARP;
4189 flags->imask |= FR_INTR_TIMER;
4190 }
4191
4192 return;
4193}
4194
4195
4196/*==============================================================================
4197 * Perform the Interrupt Test by running the READ_CODE_VERSION command MAX_INTR_
4198 * TEST_COUNTER times.
4199 */
4200static int intr_test( sdla_t* card )
4201{
4202 fr_mbox_t* mb = card->mbox;
4203 int err,i;
4204
4205 err = fr_set_intr_mode(card, FR_INTR_READY, card->wandev.mtu, 0 );
4206
4207 if (err == CMD_OK) {
4208
4209 for ( i = 0; i < MAX_INTR_TEST_COUNTER; i++ ) {
4210 /* Run command READ_CODE_VERSION */
4211 mb->cmd.length = 0;
4212 mb->cmd.command = FR_READ_CODE_VERSION;
4213 err = sdla_exec(mb) ? mb->cmd.result : CMD_TIMEOUT;
4214 if (err != CMD_OK)
4215 fr_event(card, err, mb);
4216 }
4217
4218 } else {
4219 return err;
4220 }
4221
4222 err = fr_set_intr_mode( card, 0, card->wandev.mtu, 0 );
4223
4224 if( err != CMD_OK )
4225 return err;
4226
4227 return 0;
4228}
4229
4230/*==============================================================================
4231 * Determine what type of UDP call it is. FPIPE8ND ?
4232 */
4233static int udp_pkt_type( struct sk_buff *skb, sdla_t* card )
4234{
4235 fr_udp_pkt_t *fr_udp_pkt = (fr_udp_pkt_t *)skb->data;
4236
4237 /* Quick HACK */
4238
4239
4240 if((fr_udp_pkt->ip_pkt.protocol == UDPMGMT_UDP_PROTOCOL) &&
4241 (fr_udp_pkt->ip_pkt.ver_inet_hdr_length == 0x45) &&
4242 (fr_udp_pkt->udp_pkt.udp_dst_port ==
4243 ntohs(card->wandev.udp_port)) &&
4244 (fr_udp_pkt->wp_mgmt.request_reply ==
4245 UDPMGMT_REQUEST)) {
4246 if(!strncmp(fr_udp_pkt->wp_mgmt.signature,
4247 UDPMGMT_FPIPE_SIGNATURE, 8)){
4248 return UDP_FPIPE_TYPE;
4249 }
4250 }
4251 return UDP_INVALID_TYPE;
4252}
4253
4254
4255/*==============================================================================
4256 * Initializes the Statistics values in the fr_channel structure.
4257 */
4258void init_chan_statistics( fr_channel_t* chan)
4259{
4260 memset(&chan->drvstats_if_send.if_send_entry, 0,
4261 sizeof(if_send_stat_t));
4262 memset(&chan->drvstats_rx_intr.rx_intr_no_socket, 0,
4263 sizeof(rx_intr_stat_t));
4264 memset(&chan->drvstats_gen.UDP_PIPE_mgmt_kmalloc_err, 0,
4265 sizeof(pipe_mgmt_stat_t));
4266}
4267
4268/*==============================================================================
4269 * Initializes the Statistics values in the Sdla_t structure.
4270 */
4271void init_global_statistics( sdla_t* card )
4272{
4273 /* Intialize global statistics for a card */
4274 memset(&card->statistics.isr_entry, 0, sizeof(global_stats_t));
4275}
4276
4277static void read_DLCI_IB_mapping( sdla_t* card, fr_channel_t* chan )
4278{
4279 fr_mbox_t* mbox = card->mbox;
4280 int retry = MAX_CMD_RETRY;
4281 dlci_IB_mapping_t* result;
4282 int err, counter, found;
4283
4284 do {
4285 mbox->cmd.command = FR_READ_DLCI_IB_MAPPING;
4286 mbox->cmd.length = 0;
4287 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
4288 } while (err && retry-- && fr_event(card, err, mbox));
4289
4290 if( mbox->cmd.result != 0){
4291 printk(KERN_INFO "%s: Read DLCI IB Mapping failed\n",
4292 chan->name);
4293 }
4294
4295 counter = mbox->cmd.length / sizeof(dlci_IB_mapping_t);
4296 result = (void *)mbox->data;
4297
4298 found = 0;
4299 for (; counter; --counter, ++result) {
4300 if ( result->dlci == chan->dlci ) {
4301 chan->IB_addr = result->addr_value;
4302 if(card->hw.type == SDLA_S514){
4303 chan->dlci_int_interface =
4304 (void*)(card->hw.dpmbase +
4305 chan->IB_addr);
4306 }else{
4307 chan->dlci_int_interface =
4308 (void*)(card->hw.dpmbase +
4309 (chan->IB_addr & 0x00001FFF));
4310
4311 }
4312 found = 1;
4313 break;
4314 }
4315 }
4316 if (!found)
4317 printk( KERN_INFO "%s: DLCI %d not found by IB MAPPING cmd\n",
4318 card->devname, chan->dlci);
4319}
4320
4321
4322
4323void s508_s514_lock(sdla_t *card, unsigned long *smp_flags)
4324{
4325 if (card->hw.type != SDLA_S514){
4326
4327 spin_lock_irqsave(&card->wandev.lock, *smp_flags);
4328 }else{
4329 spin_lock(&card->u.f.if_send_lock);
4330 }
4331 return;
4332}
4333
4334
4335void s508_s514_unlock(sdla_t *card, unsigned long *smp_flags)
4336{
4337 if (card->hw.type != SDLA_S514){
4338
4339 spin_unlock_irqrestore (&card->wandev.lock, *smp_flags);
4340 }else{
4341 spin_unlock(&card->u.f.if_send_lock);
4342 }
4343 return;
4344}
4345
4346
4347
4348/*----------------------------------------------------------------------
4349 RECEIVE INTERRUPT: BOTTOM HALF HANDLERS
4350 ----------------------------------------------------------------------*/
4351
4352
4353/*========================================================
4354 * bh_enqueue
4355 *
4356 * Description:
4357 * Insert a received packet into a circular
4358 * rx queue. This packet will be picked up
4359 * by fr_bh() and sent up the stack to the
4360 * user.
4361 *
4362 * Usage:
4363 * This function is called by rx interrupt,
4364 * in API mode.
4365 *
4366 */
4367
4368static int bh_enqueue(struct net_device *dev, struct sk_buff *skb)
4369{
4370 /* Check for full */
4371 fr_channel_t* chan = dev->priv;
4372 sdla_t *card = chan->card;
4373
4374
4375 if (atomic_read(&chan->bh_buff_used) == MAX_BH_BUFF){
4376 ++card->wandev.stats.rx_dropped;
4377 dev_kfree_skb_any(skb);
4378 return 1;
4379 }
4380
4381 ((bh_data_t *)&chan->bh_head[chan->bh_write])->skb = skb;
4382
4383 if (chan->bh_write == (MAX_BH_BUFF-1)){
4384 chan->bh_write=0;
4385 }else{
4386 ++chan->bh_write;
4387 }
4388
4389 atomic_inc(&chan->bh_buff_used);
4390
4391 return 0;
4392}
4393
4394
4395/*========================================================
4396 * trigger_fr_bh
4397 *
4398 * Description:
4399 * Kick the fr_bh() handler
4400 *
4401 * Usage:
4402 * rx interrupt calls this function during
4403 * the API mode.
4404 */
4405
4406static void trigger_fr_bh (fr_channel_t *chan)
4407{
4408 if (!test_and_set_bit(0,&chan->tq_working)){
4409 wanpipe_queue_work(&chan->common.wanpipe_work);
4410 }
4411}
4412
4413
4414/*========================================================
4415 * fr_bh
4416 *
4417 * Description:
4418 * Frame relay receive BH handler.
4419 * Dequeue data from the BH circular
4420 * buffer and pass it up the API sock.
4421 *
4422 * Rationale:
4423 * This fuction is used to offload the
4424 * rx_interrupt during API operation mode.
4425 * The fr_bh() function executes for each
4426 * dlci/interface.
4427 *
4428 * Once receive interrupt copies data from the
4429 * card into an skb buffer, the skb buffer
4430 * is appended to a circular BH buffer.
4431 * Then the interrupt kicks fr_bh() to finish the
4432 * job at a later time (not within the interrupt).
4433 *
4434 * Usage:
4435 * Interrupts use this to defer a task to
4436 * a polling routine.
4437 *
4438 */
4439
4440static void fr_bh(struct net_device * dev)
4441{
4442 fr_channel_t* chan = dev->priv;
4443 sdla_t *card = chan->card;
4444 struct sk_buff *skb;
4445
4446 if (atomic_read(&chan->bh_buff_used) == 0){
4447 clear_bit(0, &chan->tq_working);
4448 return;
4449 }
4450
4451 while (atomic_read(&chan->bh_buff_used)){
4452
4453 if (chan->common.sk == NULL || chan->common.func == NULL){
4454 clear_bit(0, &chan->tq_working);
4455 return;
4456 }
4457
4458 skb = ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb;
4459
4460 if (skb != NULL){
4461
4462 if (chan->common.sk == NULL || chan->common.func == NULL){
4463 ++card->wandev.stats.rx_dropped;
4464 ++chan->ifstats.rx_dropped;
4465 dev_kfree_skb_any(skb);
4466 fr_bh_cleanup(dev);
4467 continue;
4468 }
4469
4470 if (chan->common.func(skb,dev,chan->common.sk) != 0){
4471 /* Sock full cannot send, queue us for
4472 * another try */
4473 atomic_set(&chan->common.receive_block,1);
4474 return;
4475 }else{
4476 fr_bh_cleanup(dev);
4477 }
4478 }else{
4479 fr_bh_cleanup(dev);
4480 }
4481 }
4482 clear_bit(0, &chan->tq_working);
4483
4484 return;
4485}
4486
4487static int fr_bh_cleanup(struct net_device *dev)
4488{
4489 fr_channel_t* chan = dev->priv;
4490
4491 ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb = NULL;
4492
4493 if (chan->bh_read == (MAX_BH_BUFF-1)){
4494 chan->bh_read=0;
4495 }else{
4496 ++chan->bh_read;
4497 }
4498
4499 atomic_dec(&chan->bh_buff_used);
4500 return 0;
4501}
4502
4503
4504/*----------------------------------------------------------------------
4505 POLL BH HANDLERS AND KICK ROUTINES
4506 ----------------------------------------------------------------------*/
4507
4508/*============================================================
4509 * trigger_fr_poll
4510 *
4511 * Description:
4512 * Add a fr_poll() task into a tq_scheduler bh handler
4513 * for a specific dlci/interface. This will kick
4514 * the fr_poll() routine at a later time.
4515 *
4516 * Usage:
4517 * Interrupts use this to defer a taks to
4518 * a polling routine.
4519 *
4520 */
4521static void trigger_fr_poll(struct net_device *dev)
4522{
4523 fr_channel_t* chan = dev->priv;
4524 schedule_work(&chan->fr_poll_work);
4525 return;
4526}
4527
4528
4529/*============================================================
4530 * fr_poll
4531 *
4532 * Rationale:
4533 * We cannot manipulate the routing tables, or
4534 * ip addresses withing the interrupt. Therefore
4535 * we must perform such actons outside an interrupt
4536 * at a later time.
4537 *
4538 * Description:
4539 * Frame relay polling routine, responsible for
4540 * shutting down interfaces upon disconnect
4541 * and adding/removing routes.
4542 *
4543 * Usage:
4544 * This function is executed for each frame relay
4545 * dlci/interface through a tq_schedule bottom half.
4546 *
4547 * trigger_fr_poll() function is used to kick
4548 * the fr_poll routine.
4549 */
4550
4551static void fr_poll(struct net_device *dev)
4552{
4553
4554 fr_channel_t* chan;
4555 sdla_t *card;
4556 u8 check_gateway=0;
4557
4558 if (!dev || (chan = dev->priv) == NULL)
4559 return;
4560
4561 card = chan->card;
4562
4563 /* (Re)Configuraiton is in progress, stop what you are
4564 * doing and get out */
4565 if (test_bit(PERI_CRIT,&card->wandev.critical)){
4566 return;
4567 }
4568
4569 switch (chan->common.state){
4570
4571 case WAN_DISCONNECTED:
4572
4573 if (test_bit(DYN_OPT_ON,&chan->interface_down) &&
4574 !test_bit(DEV_DOWN, &chan->interface_down) &&
4575 dev->flags&IFF_UP){
4576
4577 printk(KERN_INFO "%s: Interface %s is Down.\n",
4578 card->devname,dev->name);
4579 change_dev_flags(dev,dev->flags&~IFF_UP);
4580 set_bit(DEV_DOWN, &chan->interface_down);
4581 chan->route_flag = NO_ROUTE;
4582
4583 }else{
4584 if (chan->inarp != INARP_NONE)
4585 process_route(dev);
4586 }
4587 break;
4588
4589 case WAN_CONNECTED:
4590
4591 if (test_bit(DYN_OPT_ON,&chan->interface_down) &&
4592 test_bit(DEV_DOWN, &chan->interface_down) &&
4593 !(dev->flags&IFF_UP)){
4594
4595 printk(KERN_INFO "%s: Interface %s is Up.\n",
4596 card->devname,dev->name);
4597
4598 change_dev_flags(dev,dev->flags|IFF_UP);
4599 clear_bit(DEV_DOWN, &chan->interface_down);
4600 check_gateway=1;
4601 }
4602
4603 if (chan->inarp != INARP_NONE){
4604 process_route(dev);
4605 check_gateway=1;
4606 }
4607
4608 if (chan->gateway && check_gateway)
4609 add_gateway(card,dev);
4610
4611 break;
4612
4613 }
4614
4615 return;
4616}
4617
4618/*==============================================================
4619 * check_tx_status
4620 *
4621 * Rationale:
4622 * We cannot transmit from an interrupt while
4623 * the if_send is transmitting data. Therefore,
4624 * we must check whether the tx buffers are
4625 * begin used, before we transmit from an
4626 * interrupt.
4627 *
4628 * Description:
4629 * Checks whether it's safe to use the transmit
4630 * buffers.
4631 *
4632 * Usage:
4633 * ARP and UDP handling routines use this function
4634 * because, they need to transmit data during
4635 * an interrupt.
4636 */
4637
4638static int check_tx_status(sdla_t *card, struct net_device *dev)
4639{
4640
4641 if (card->hw.type == SDLA_S514){
4642 if (test_bit(SEND_CRIT, (void*)&card->wandev.critical) ||
4643 test_bit(SEND_TXIRQ_CRIT, (void*)&card->wandev.critical)) {
4644 return 1;
4645 }
4646 }
4647
4648 if (netif_queue_stopped(dev) || (card->u.f.tx_interrupts_pending))
4649 return 1;
4650
4651 return 0;
4652}
4653
4654/*===============================================================
4655 * move_dev_to_next
4656 *
4657 * Description:
4658 * Move the dev pointer to the next location in the
4659 * link list. Check if we are at the end of the
4660 * list, if so start from the begining.
4661 *
4662 * Usage:
4663 * Timer interrupt uses this function to efficiently
4664 * step through the devices that need to send ARP data.
4665 *
4666 */
4667
4668struct net_device *move_dev_to_next(sdla_t *card, struct net_device *dev)
4669{
4670 if (card->wandev.new_if_cnt != 1){
4671 if (!*((struct net_device **)dev->priv))
4672 return card->wandev.dev;
4673 else
4674 return *((struct net_device **)dev->priv);
4675 }
4676 return dev;
4677}
4678
4679/*==============================================================
4680 * trigger_config_fr
4681 *
4682 * Rationale:
4683 * All commands must be performed inside of a
4684 * interrupt.
4685 *
4686 * Description:
4687 * Kick the config_fr() routine throught the
4688 * timer interrupt.
4689 */
4690
4691
4692static void trigger_config_fr (sdla_t *card)
4693{
4694 fr508_flags_t* flags = card->flags;
4695
4696 card->u.f.timer_int_enabled |= TMR_INT_ENABLED_CONFIG;
4697 flags->imask |= FR_INTR_TIMER;
4698}
4699
4700
4701/*==============================================================
4702 * config_fr
4703 *
4704 * Rationale:
4705 * All commands must be performed inside of a
4706 * interrupt.
4707 &
4708 * Description:
4709 * Configure a DLCI. This function is executed
4710 * by a timer_interrupt. The if_open() function
4711 * triggers it.
4712 *
4713 * Usage:
4714 * new_if() collects all data necessary to
4715 * configure the DLCI. It sets the chan->dlci_ready
4716 * bit. When the if_open() function is executed
4717 * it checks this bit, and if its set it triggers
4718 * the timer interrupt to execute the config_fr()
4719 * function.
4720 */
4721
4722static void config_fr (sdla_t *card)
4723{
4724 struct net_device *dev;
4725 fr_channel_t *chan;
4726
4727 for (dev = card->wandev.dev; dev;
4728 dev = *((struct net_device **)dev->priv)) {
4729
4730 if ((chan=dev->priv) == NULL)
4731 continue;
4732
4733 if (!test_bit(0,&chan->config_dlci))
4734 continue;
4735
4736 clear_bit(0,&chan->config_dlci);
4737
4738 /* If signalling is set to NO, then setup
4739 * DLCI addresses right away. Don't have to wait for
4740 * link to connect.
4741 */
4742 if (card->wandev.signalling == WANOPT_NO){
4743 printk(KERN_INFO "%s: Signalling set to NO: Mapping DLCI's\n",
4744 card->wandev.name);
4745 if (fr_init_dlci(card,chan)){
4746 printk(KERN_INFO "%s: ERROR: Failed to configure DLCI %i !\n",
4747 card->devname, chan->dlci);
4748 return;
4749 }
4750 }
4751
4752 if (card->wandev.station == WANOPT_CPE) {
4753
4754 update_chan_state(dev);
4755
4756 /* CPE: issue full status enquiry */
4757 fr_issue_isf(card, FR_ISF_FSE);
4758
4759 } else {
4760 /* FR switch: activate DLCI(s) */
4761
4762 /* For Switch emulation we have to ADD and ACTIVATE
4763 * the DLCI(s) that were configured with the SET_DLCI_
4764 * CONFIGURATION command. Add and Activate will fail if
4765 * DLCI specified is not included in the list.
4766 *
4767 * Also If_open is called once for each interface. But
4768 * it does not get in here for all the interface. So
4769 * we have to pass the entire list of DLCI(s) to add
4770 * activate routines.
4771 */
4772
4773 if (!check_dlci_config (card, chan)){
4774 fr_add_dlci(card, chan->dlci);
4775 fr_activate_dlci(card, chan->dlci);
4776 }
4777 }
4778
4779 card->u.f.dlci_to_dev_map[chan->dlci] = dev;
4780 }
4781 return;
4782}
4783
4784
4785/*==============================================================
4786 * config_fr
4787 *
4788 * Rationale:
4789 * All commands must be executed during an interrupt.
4790 *
4791 * Description:
4792 * Trigger uncofig_fr() function through
4793 * the timer interrupt.
4794 *
4795 */
4796
4797static void trigger_unconfig_fr(struct net_device *dev)
4798{
4799 fr_channel_t *chan = dev->priv;
4800 volatile sdla_t *card = chan->card;
4801 unsigned long timeout;
4802 fr508_flags_t* flags = card->flags;
4803 int reset_critical=0;
4804
4805 if (test_bit(PERI_CRIT,(void*)&card->wandev.critical)){
4806 clear_bit(PERI_CRIT,(void*)&card->wandev.critical);
4807 reset_critical=1;
4808 }
4809
4810 /* run unconfig_dlci() function
4811 * throught the timer interrupt */
4812 set_bit(0,(void*)&chan->unconfig_dlci);
4813 card->u.f.timer_int_enabled |= TMR_INT_ENABLED_UNCONFIG;
4814 flags->imask |= FR_INTR_TIMER;
4815
4816 /* Wait for the command to complete */
4817 timeout = jiffies;
4818 for(;;) {
4819
4820 if(!(card->u.f.timer_int_enabled & TMR_INT_ENABLED_UNCONFIG))
4821 break;
4822
4823 if (time_after(jiffies, timeout + 1 * HZ)){
4824 card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_UNCONFIG;
4825 printk(KERN_INFO "%s: Failed to delete DLCI %i\n",
4826 card->devname,chan->dlci);
4827 break;
4828 }
4829 }
4830
4831 if (reset_critical){
4832 set_bit(PERI_CRIT,(void*)&card->wandev.critical);
4833 }
4834}
4835
4836/*==============================================================
4837 * unconfig_fr
4838 *
4839 * Rationale:
4840 * All commands must be executed during an interrupt.
4841 *
4842 * Description:
4843 * Remove the dlci from firmware.
4844 * This funciton is used in NODE shutdown.
4845 */
4846
4847static void unconfig_fr (sdla_t *card)
4848{
4849 struct net_device *dev;
4850 fr_channel_t *chan;
4851
4852 for (dev = card->wandev.dev; dev;
4853 dev = *((struct net_device **)dev->priv)){
4854
4855 if ((chan=dev->priv) == NULL)
4856 continue;
4857
4858 if (!test_bit(0,&chan->unconfig_dlci))
4859 continue;
4860
4861 clear_bit(0,&chan->unconfig_dlci);
4862
4863 if (card->wandev.station == WANOPT_NODE){
4864 printk(KERN_INFO "%s: Unconfiguring DLCI %i\n",
4865 card->devname,chan->dlci);
4866 fr_delete_dlci(card,chan->dlci);
4867 }
4868 card->u.f.dlci_to_dev_map[chan->dlci] = NULL;
4869 }
4870}
4871
4872static int setup_fr_header(struct sk_buff *skb, struct net_device* dev,
4873 char op_mode)
4874{
4875 fr_channel_t *chan=dev->priv;
4876
4877 if (op_mode == WANPIPE) {
4878 chan->fr_header[0]=Q922_UI;
4879
4880 switch (htons(skb->protocol)){
4881 case ETH_P_IP:
4882 chan->fr_header[1]=NLPID_IP;
4883 break;
4884 default:
4885 return -EINVAL;
4886 }
4887
4888 return 2;
4889 }
4890
4891 /* If we are in bridging mode, we must apply
4892 * an Ethernet header
4893 */
4894 if (op_mode == BRIDGE || op_mode == BRIDGE_NODE) {
4895 /* Encapsulate the packet as a bridged Ethernet frame. */
4896#ifdef DEBUG
4897 printk(KERN_INFO "%s: encapsulating skb for frame relay\n",
4898 dev->name);
4899#endif
4900 chan->fr_header[0] = 0x03;
4901 chan->fr_header[1] = 0x00;
4902 chan->fr_header[2] = 0x80;
4903 chan->fr_header[3] = 0x00;
4904 chan->fr_header[4] = 0x80;
4905 chan->fr_header[5] = 0xC2;
4906 chan->fr_header[6] = 0x00;
4907 chan->fr_header[7] = 0x07;
4908
4909 /* Yuck. */
4910 skb->protocol = ETH_P_802_3;
4911 return 8;
4912 }
4913
4914 return 0;
4915}
4916
4917
4918static int check_dlci_config (sdla_t *card, fr_channel_t *chan)
4919{
4920 fr_mbox_t* mbox = card->mbox;
4921 int err=0;
4922 fr_conf_t *conf=NULL;
4923 unsigned short dlci_num = chan->dlci;
4924 int dlci_offset=0;
4925 struct net_device *dev = NULL;
4926
4927 mbox->cmd.command = FR_READ_CONFIG;
4928 mbox->cmd.length = 0;
4929 mbox->cmd.dlci = dlci_num;
4930
4931 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
4932
4933 if (err == CMD_OK){
4934 return 0;
4935 }
4936
4937 for (dev = card->wandev.dev; dev;
4938 dev=*((struct net_device **)dev->priv))
4939 set_chan_state(dev,WAN_DISCONNECTED);
4940
4941 printk(KERN_INFO "DLCI %i Not configured, configuring\n",dlci_num);
4942
4943 mbox->cmd.command = FR_COMM_DISABLE;
4944 mbox->cmd.length = 0;
4945 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
4946 if (err != CMD_OK){
4947 fr_event(card, err, mbox);
4948 return 2;
4949 }
4950
4951 printk(KERN_INFO "Disabled Communications \n");
4952
4953 mbox->cmd.command = FR_READ_CONFIG;
4954 mbox->cmd.length = 0;
4955 mbox->cmd.dlci = 0;
4956
4957 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
4958
4959 if (err != CMD_OK){
4960 fr_event(card, err, mbox);
4961 return 2;
4962 }
4963
4964 conf = (fr_conf_t *)mbox->data;
4965
4966 dlci_offset=0;
4967 for (dev = card->wandev.dev; dev;
4968 dev = *((struct net_device **)dev->priv)) {
4969 fr_channel_t *chan_tmp = dev->priv;
4970 conf->dlci[dlci_offset] = chan_tmp->dlci;
4971 dlci_offset++;
4972 }
4973
4974 printk(KERN_INFO "Got Fr configuration Buffer Length is %x Dlci %i Dlci Off %i\n",
4975 mbox->cmd.length,
4976 mbox->cmd.length > 0x20 ? conf->dlci[0] : -1,
4977 dlci_offset );
4978
4979 mbox->cmd.length = 0x20 + dlci_offset*2;
4980
4981 mbox->cmd.command = FR_SET_CONFIG;
4982 mbox->cmd.dlci = 0;
4983
4984 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
4985
4986 if (err != CMD_OK){
4987 fr_event(card, err, mbox);
4988 return 2;
4989 }
4990
4991 initialize_rx_tx_buffers (card);
4992
4993
4994 printk(KERN_INFO "Configuraiton Succeded for new DLCI %i\n",dlci_num);
4995
4996 if (fr_comm_enable (card)){
4997 return 2;
4998 }
4999
5000 printk(KERN_INFO "Enabling Communications \n");
5001
5002 for (dev = card->wandev.dev; dev;
5003 dev = *((struct net_device **)dev->priv)) {
5004 fr_channel_t *chan_tmp = dev->priv;
5005 fr_init_dlci(card,chan_tmp);
5006 fr_add_dlci(card, chan_tmp->dlci);
5007 fr_activate_dlci(card, chan_tmp->dlci);
5008 }
5009
5010 printk(KERN_INFO "END OF CONFIGURAITON %i\n",dlci_num);
5011
5012 return 1;
5013}
5014
5015static void initialize_rx_tx_buffers (sdla_t *card)
5016{
5017 fr_buf_info_t* buf_info;
5018
5019 if (card->hw.type == SDLA_S514) {
5020
5021 buf_info = (void*)(card->hw.dpmbase + FR_MB_VECTOR +
5022 FR508_RXBC_OFFS);
5023
5024 card->rxmb = (void*)(buf_info->rse_next + card->hw.dpmbase);
5025
5026 card->u.f.rxmb_base =
5027 (void*)(buf_info->rse_base + card->hw.dpmbase);
5028
5029 card->u.f.rxmb_last =
5030 (void*)(buf_info->rse_base +
5031 (buf_info->rse_num - 1) * sizeof(fr_rx_buf_ctl_t) +
5032 card->hw.dpmbase);
5033 }else{
5034 buf_info = (void*)(card->hw.dpmbase + FR508_RXBC_OFFS);
5035
5036 card->rxmb = (void*)(buf_info->rse_next -
5037 FR_MB_VECTOR + card->hw.dpmbase);
5038
5039 card->u.f.rxmb_base =
5040 (void*)(buf_info->rse_base -
5041 FR_MB_VECTOR + card->hw.dpmbase);
5042
5043 card->u.f.rxmb_last =
5044 (void*)(buf_info->rse_base +
5045 (buf_info->rse_num - 1) * sizeof(fr_rx_buf_ctl_t) -
5046 FR_MB_VECTOR + card->hw.dpmbase);
5047 }
5048
5049 card->u.f.rx_base = buf_info->buf_base;
5050 card->u.f.rx_top = buf_info->buf_top;
5051
5052 card->u.f.tx_interrupts_pending = 0;
5053
5054 return;
5055}
5056
5057
5058
5059MODULE_LICENSE("GPL");
5060
5061/****** End *****************************************************************/
diff --git a/drivers/net/wan/sdla_ft1.c b/drivers/net/wan/sdla_ft1.c
deleted file mode 100644
index 9d6528a50f7b..000000000000
--- a/drivers/net/wan/sdla_ft1.c
+++ /dev/null
@@ -1,345 +0,0 @@
1/*****************************************************************************
2* sdla_chdlc.c WANPIPE(tm) Multiprotocol WAN Link Driver. Cisco HDLC module.
3*
4* Authors: Nenad Corbic <ncorbic@sangoma.com>
5* Gideon Hack
6*
7* Copyright: (c) 1995-1999 Sangoma Technologies Inc.
8*
9* This program is free software; you can redistribute it and/or
10* modify it under the terms of the GNU General Public License
11* as published by the Free Software Foundation; either version
12* 2 of the License, or (at your option) any later version.
13* ============================================================================
14* Sep 30, 1999 Nenad Corbic Fixed dynamic IP and route setup.
15* Sep 23, 1999 Nenad Corbic Added SMP support, fixed tracing
16* Sep 13, 1999 Nenad Corbic Split up Port 0 and 1 into separate devices.
17* Jun 02, 1999 Gideon Hack Added support for the S514 adapter.
18* Oct 30, 1998 Jaspreet Singh Added Support for CHDLC API (HDLC STREAMING).
19* Oct 28, 1998 Jaspreet Singh Added Support for Dual Port CHDLC.
20* Aug 07, 1998 David Fong Initial version.
21*****************************************************************************/
22
23#include <linux/module.h>
24#include <linux/kernel.h> /* printk(), and other useful stuff */
25#include <linux/stddef.h> /* offsetof(), etc. */
26#include <linux/errno.h> /* return codes */
27#include <linux/string.h> /* inline memset(), etc. */
28#include <linux/slab.h> /* kmalloc(), kfree() */
29#include <linux/wanrouter.h> /* WAN router definitions */
30#include <linux/wanpipe.h> /* WANPIPE common user API definitions */
31#include <linux/if_arp.h> /* ARPHRD_* defines */
32#include <linux/jiffies.h> /* time_after() macro */
33
34#include <linux/inetdevice.h>
35#include <asm/uaccess.h>
36
37#include <linux/in.h> /* sockaddr_in */
38#include <linux/inet.h>
39#include <linux/if.h>
40#include <asm/byteorder.h> /* htons(), etc. */
41#include <linux/sdlapci.h>
42#include <asm/io.h>
43
44#include <linux/sdla_chdlc.h> /* CHDLC firmware API definitions */
45
46/****** Defines & Macros ****************************************************/
47
48/* reasons for enabling the timer interrupt on the adapter */
49#define TMR_INT_ENABLED_UDP 0x0001
50#define TMR_INT_ENABLED_UPDATE 0x0002
51
52#define CHDLC_DFLT_DATA_LEN 1500 /* default MTU */
53#define CHDLC_HDR_LEN 1
54
55#define IFF_POINTTOPOINT 0x10
56
57#define WANPIPE 0x00
58#define API 0x01
59#define CHDLC_API 0x01
60
61#define PORT(x) (x == 0 ? "PRIMARY" : "SECONDARY" )
62
63
64/******Data Structures*****************************************************/
65
66/* This structure is placed in the private data area of the device structure.
67 * The card structure used to occupy the private area but now the following
68 * structure will incorporate the card structure along with CHDLC specific data
69 */
70
71typedef struct chdlc_private_area
72{
73 struct net_device *slave;
74 sdla_t *card;
75 int TracingEnabled; /* For enabling Tracing */
76 unsigned long curr_trace_addr; /* Used for Tracing */
77 unsigned long start_trace_addr;
78 unsigned long end_trace_addr;
79 unsigned long base_addr_trace_buffer;
80 unsigned long end_addr_trace_buffer;
81 unsigned short number_trace_elements;
82 unsigned available_buffer_space;
83 unsigned long router_start_time;
84 unsigned char route_status;
85 unsigned char route_removed;
86 unsigned long tick_counter; /* For 5s timeout counter */
87 unsigned long router_up_time;
88 u32 IP_address; /* IP addressing */
89 u32 IP_netmask;
90 unsigned char mc; /* Mulitcast support on/off */
91 unsigned short udp_pkt_lgth; /* udp packet processing */
92 char udp_pkt_src;
93 char udp_pkt_data[MAX_LGTH_UDP_MGNT_PKT];
94 unsigned short timer_int_enabled;
95 char update_comms_stats; /* updating comms stats */
96 //FIXME: add driver stats as per frame relay!
97
98} chdlc_private_area_t;
99
100/* Route Status options */
101#define NO_ROUTE 0x00
102#define ADD_ROUTE 0x01
103#define ROUTE_ADDED 0x02
104#define REMOVE_ROUTE 0x03
105
106
107/****** Function Prototypes *************************************************/
108/* WAN link driver entry points. These are called by the WAN router module. */
109static int wpft1_exec (struct sdla *card, void *u_cmd, void *u_data);
110static int chdlc_read_version (sdla_t* card, char* str);
111static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb);
112
113/****** Public Functions ****************************************************/
114
115/*============================================================================
116 * Cisco HDLC protocol initialization routine.
117 *
118 * This routine is called by the main WANPIPE module during setup. At this
119 * point adapter is completely initialized and firmware is running.
120 * o read firmware version (to make sure it's alive)
121 * o configure adapter
122 * o initialize protocol-specific fields of the adapter data space.
123 *
124 * Return: 0 o.k.
125 * < 0 failure.
126 */
127int wpft1_init (sdla_t* card, wandev_conf_t* conf)
128{
129 unsigned char port_num;
130 int err;
131
132 union
133 {
134 char str[80];
135 } u;
136 volatile CHDLC_MAILBOX_STRUCT* mb;
137 CHDLC_MAILBOX_STRUCT* mb1;
138 unsigned long timeout;
139
140 /* Verify configuration ID */
141 if (conf->config_id != WANCONFIG_CHDLC) {
142 printk(KERN_INFO "%s: invalid configuration ID %u!\n",
143 card->devname, conf->config_id);
144 return -EINVAL;
145 }
146
147 /* Use primary port */
148 card->u.c.comm_port = 0;
149
150
151 /* Initialize protocol-specific fields */
152 if(card->hw.type != SDLA_S514){
153 card->mbox = (void *) card->hw.dpmbase;
154 }else{
155 card->mbox = (void *) card->hw.dpmbase + PRI_BASE_ADDR_MB_STRUCT;
156 }
157
158 mb = mb1 = card->mbox;
159
160 if (!card->configured){
161
162 /* The board will place an 'I' in the return code to indicate that it is
163 ready to accept commands. We expect this to be completed in less
164 than 1 second. */
165
166 timeout = jiffies;
167 while (mb->return_code != 'I') /* Wait 1s for board to initialize */
168 if (time_after(jiffies, timeout + 1*HZ)) break;
169
170 if (mb->return_code != 'I') {
171 printk(KERN_INFO
172 "%s: Initialization not completed by adapter\n",
173 card->devname);
174 printk(KERN_INFO "Please contact Sangoma representative.\n");
175 return -EIO;
176 }
177 }
178
179 /* Read firmware version. Note that when adapter initializes, it
180 * clears the mailbox, so it may appear that the first command was
181 * executed successfully when in fact it was merely erased. To work
182 * around this, we execute the first command twice.
183 */
184
185 if (chdlc_read_version(card, u.str))
186 return -EIO;
187
188 printk(KERN_INFO "%s: Running FT1 Configuration firmware v%s\n",
189 card->devname, u.str);
190
191 card->isr = NULL;
192 card->poll = NULL;
193 card->exec = &wpft1_exec;
194 card->wandev.update = NULL;
195 card->wandev.new_if = NULL;
196 card->wandev.del_if = NULL;
197 card->wandev.state = WAN_DUALPORT;
198 card->wandev.udp_port = conf->udp_port;
199
200 card->wandev.new_if_cnt = 0;
201
202 /* This is for the ports link state */
203 card->u.c.state = WAN_DISCONNECTED;
204
205 /* reset the number of times the 'update()' proc has been called */
206 card->u.c.update_call_count = 0;
207
208 card->wandev.ttl = 0x7F;
209 card->wandev.interface = 0;
210
211 card->wandev.clocking = 0;
212
213 port_num = card->u.c.comm_port;
214
215 /* Setup Port Bps */
216
217 card->wandev.bps = 0;
218
219 card->wandev.mtu = MIN_LGTH_CHDLC_DATA_CFG;
220
221 /* Set up the interrupt status area */
222 /* Read the CHDLC Configuration and obtain:
223 * Ptr to shared memory infor struct
224 * Use this pointer to calculate the value of card->u.c.flags !
225 */
226 mb1->buffer_length = 0;
227 mb1->command = READ_CHDLC_CONFIGURATION;
228 err = sdla_exec(mb1) ? mb1->return_code : CMD_TIMEOUT;
229 if(err != COMMAND_OK) {
230 chdlc_error(card, err, mb1);
231 return -EIO;
232 }
233
234 if(card->hw.type == SDLA_S514){
235 card->u.c.flags = (void *)(card->hw.dpmbase +
236 (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)->
237 ptr_shared_mem_info_struct));
238 }else{
239 card->u.c.flags = (void *)(card->hw.dpmbase +
240 (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)->
241 ptr_shared_mem_info_struct % SDLA_WINDOWSIZE));
242 }
243
244 card->wandev.state = WAN_FT1_READY;
245 printk(KERN_INFO "%s: FT1 Config Ready !\n",card->devname);
246
247 return 0;
248}
249
250static int wpft1_exec(sdla_t *card, void *u_cmd, void *u_data)
251{
252 CHDLC_MAILBOX_STRUCT* mbox = card->mbox;
253 int len;
254
255 if (copy_from_user((void*)&mbox->command, u_cmd, sizeof(ft1_exec_cmd_t))){
256 return -EFAULT;
257 }
258
259 len = mbox->buffer_length;
260
261 if (len) {
262 if( copy_from_user((void*)&mbox->data, u_data, len)){
263 return -EFAULT;
264 }
265 }
266
267 /* execute command */
268 if (!sdla_exec(mbox)){
269 return -EIO;
270 }
271
272 /* return result */
273 if( copy_to_user(u_cmd, (void*)&mbox->command, sizeof(ft1_exec_cmd_t))){
274 return -EFAULT;
275 }
276
277 len = mbox->buffer_length;
278
279 if (len && u_data && copy_to_user(u_data, (void*)&mbox->data, len)){
280 return -EFAULT;
281 }
282
283 return 0;
284
285}
286
287/*============================================================================
288 * Read firmware code version.
289 * Put code version as ASCII string in str.
290 */
291static int chdlc_read_version (sdla_t* card, char* str)
292{
293 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
294 int len;
295 char err;
296 mb->buffer_length = 0;
297 mb->command = READ_CHDLC_CODE_VERSION;
298 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
299
300 if(err != COMMAND_OK) {
301 chdlc_error(card,err,mb);
302 }
303 else if (str) { /* is not null */
304 len = mb->buffer_length;
305 memcpy(str, mb->data, len);
306 str[len] = '\0';
307 }
308 return (err);
309}
310
311/*============================================================================
312 * Firmware error handler.
313 * This routine is called whenever firmware command returns non-zero
314 * return code.
315 *
316 * Return zero if previous command has to be cancelled.
317 */
318static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb)
319{
320 unsigned cmd = mb->command;
321
322 switch (err) {
323
324 case CMD_TIMEOUT:
325 printk(KERN_ERR "%s: command 0x%02X timed out!\n",
326 card->devname, cmd);
327 break;
328
329 case S514_BOTH_PORTS_SAME_CLK_MODE:
330 if(cmd == SET_CHDLC_CONFIGURATION) {
331 printk(KERN_INFO
332 "%s: Configure both ports for the same clock source\n",
333 card->devname);
334 break;
335 }
336
337 default:
338 printk(KERN_INFO "%s: command 0x%02X returned 0x%02X!\n",
339 card->devname, cmd, err);
340 }
341
342 return 0;
343}
344
345MODULE_LICENSE("GPL");
diff --git a/drivers/net/wan/sdla_ppp.c b/drivers/net/wan/sdla_ppp.c
deleted file mode 100644
index a4b489cccbbf..000000000000
--- a/drivers/net/wan/sdla_ppp.c
+++ /dev/null
@@ -1,3430 +0,0 @@
1/*****************************************************************************
2* sdla_ppp.c WANPIPE(tm) Multiprotocol WAN Link Driver. PPP module.
3*
4* Author: Nenad Corbic <ncorbic@sangoma.com>
5*
6* Copyright: (c) 1995-2001 Sangoma Technologies Inc.
7*
8* This program is free software; you can redistribute it and/or
9* modify it under the terms of the GNU General Public License
10* as published by the Free Software Foundation; either version
11* 2 of the License, or (at your option) any later version.
12* ============================================================================
13* Feb 28, 2001 Nenad Corbic o Updated if_tx_timeout() routine for
14* 2.4.X kernels.
15* Nov 29, 2000 Nenad Corbic o Added the 2.4.x kernel support:
16* get_ip_address() function has moved
17* into the ppp_poll() routine. It cannot
18* be called from an interrupt.
19* Nov 07, 2000 Nenad Corbic o Added security features for UDP debugging:
20* Deny all and specify allowed requests.
21* May 02, 2000 Nenad Corbic o Added the dynamic interface shutdown
22* option. When the link goes down, the
23* network interface IFF_UP flag is reset.
24* Mar 06, 2000 Nenad Corbic o Bug Fix: corrupted mbox recovery.
25* Feb 25, 2000 Nenad Corbic o Fixed the FT1 UDP debugger problem.
26* Feb 09, 2000 Nenad Coribc o Shutdown bug fix. update() was called
27* with NULL dev pointer: no check.
28* Jan 24, 2000 Nenad Corbic o Disabled use of CMD complete inter.
29* Dev 15, 1999 Nenad Corbic o Fixed up header files for 2.0.X kernels
30* Oct 25, 1999 Nenad Corbic o Support for 2.0.X kernels
31* Moved dynamic route processing into
32* a polling routine.
33* Oct 07, 1999 Nenad Corbic o Support for S514 PCI card.
34* Gideon Hack o UPD and Updates executed using timer interrupt
35* Sep 10, 1999 Nenad Corbic o Fixed up the /proc statistics
36* Jul 20, 1999 Nenad Corbic o Remove the polling routines and use
37* interrupts instead.
38* Sep 17, 1998 Jaspreet Singh o Updates for 2.2.X Kernels.
39* Aug 13, 1998 Jaspreet Singh o Improved Line Tracing.
40* Jun 22, 1998 David Fong o Added remote IP address assignment
41* Mar 15, 1998 Alan Cox o 2.1.8x basic port.
42* Apr 16, 1998 Jaspreet Singh o using htons() for the IPX protocol.
43* Dec 09, 1997 Jaspreet Singh o Added PAP and CHAP.
44* o Implemented new routines like
45* ppp_set_inbnd_auth(), ppp_set_outbnd_auth(),
46* tokenize() and strstrip().
47* Nov 27, 1997 Jaspreet Singh o Added protection against enabling of irqs
48* while they have been disabled.
49* Nov 24, 1997 Jaspreet Singh o Fixed another RACE condition caused by
50* disabling and enabling of irqs.
51* o Added new counters for stats on disable/enable
52* IRQs.
53* Nov 10, 1997 Jaspreet Singh o Initialized 'skb->mac.raw' to 'skb->data'
54* before every netif_rx().
55* o Free up the device structure in del_if().
56* Nov 07, 1997 Jaspreet Singh o Changed the delay to zero for Line tracing
57* command.
58* Oct 20, 1997 Jaspreet Singh o Added hooks in for Router UP time.
59* Oct 16, 1997 Jaspreet Singh o The critical flag is used to maintain flow
60* control by avoiding RACE conditions. The
61* cli() and restore_flags() are taken out.
62* A new structure, "ppp_private_area", is added
63* to provide Driver Statistics.
64* Jul 21, 1997 Jaspreet Singh o Protected calls to sdla_peek() by adding
65* save_flags(), cli() and restore_flags().
66* Jul 07, 1997 Jaspreet Singh o Added configurable TTL for UDP packets
67* o Added ability to discard mulitcast and
68* broacast source addressed packets.
69* Jun 27, 1997 Jaspreet Singh o Added FT1 monitor capabilities
70* New case (0x25) statement in if_send routine.
71* Added a global variable rCount to keep track
72* of FT1 status enabled on the board.
73* May 22, 1997 Jaspreet Singh o Added change in the PPP_SET_CONFIG command for
74* 508 card to reflect changes in the new
75* ppp508.sfm for supporting:continous transmission
76* of Configure-Request packets without receiving a
77* reply
78* OR-ed 0x300 to conf_flags
79* o Changed connect_tmout from 900 to 0
80* May 21, 1997 Jaspreet Singh o Fixed UDP Management for multiple boards
81* Apr 25, 1997 Farhan Thawar o added UDP Management stuff
82* Mar 11, 1997 Farhan Thawar Version 3.1.1
83* o fixed (+1) bug in rx_intr()
84* o changed if_send() to return 0 if
85* wandev.critical() is true
86* o free socket buffer in if_send() if
87* returning 0
88* Jan 15, 1997 Gene Kozin Version 3.1.0
89* o implemented exec() entry point
90* Jan 06, 1997 Gene Kozin Initial version.
91*****************************************************************************/
92
93#include <linux/module.h>
94#include <linux/kernel.h> /* printk(), and other useful stuff */
95#include <linux/stddef.h> /* offsetof(), etc. */
96#include <linux/errno.h> /* return codes */
97#include <linux/string.h> /* inline memset(), etc. */
98#include <linux/slab.h> /* kmalloc(), kfree() */
99#include <linux/wanrouter.h> /* WAN router definitions */
100#include <linux/wanpipe.h> /* WANPIPE common user API definitions */
101#include <linux/if_arp.h> /* ARPHRD_* defines */
102#include <asm/byteorder.h> /* htons(), etc. */
103#include <linux/in.h> /* sockaddr_in */
104#include <linux/jiffies.h> /* time_after() macro */
105
106
107#include <asm/uaccess.h>
108#include <linux/inetdevice.h>
109#include <linux/netdevice.h>
110
111#include <linux/if.h>
112#include <linux/sdla_ppp.h> /* PPP firmware API definitions */
113#include <linux/sdlasfm.h> /* S514 Type Definition */
114/****** Defines & Macros ****************************************************/
115
116#define PPP_DFLT_MTU 1500 /* default MTU */
117#define PPP_MAX_MTU 4000 /* maximum MTU */
118#define PPP_HDR_LEN 1
119
120#define MAX_IP_ERRORS 100
121
122#define CONNECT_TIMEOUT (90*HZ) /* link connection timeout */
123#define HOLD_DOWN_TIME (5*HZ) /* link hold down time : Changed from 30 to 5 */
124
125/* For handle_IPXWAN() */
126#define CVHexToAscii(b) (((unsigned char)(b) > (unsigned char)9) ? ((unsigned char)'A' + ((unsigned char)(b) - (unsigned char)10)) : ((unsigned char)'0' + (unsigned char)(b)))
127
128/* Macro for enabling/disabling debugging comments */
129//#define NEX_DEBUG
130#ifdef NEX_DEBUG
131#define NEX_PRINTK(format, a...) printk(format, ## a)
132#else
133#define NEX_PRINTK(format, a...)
134#endif /* NEX_DEBUG */
135
136#define DCD(a) ( a & 0x08 ? "HIGH" : "LOW" )
137#define CTS(a) ( a & 0x20 ? "HIGH" : "LOW" )
138#define LCP(a) ( a == 0x09 ? "OPEN" : "CLOSED" )
139#define IP(a) ( a == 0x09 ? "ENABLED" : "DISABLED" )
140
141#define TMR_INT_ENABLED_UPDATE 0x01
142#define TMR_INT_ENABLED_PPP_EVENT 0x02
143#define TMR_INT_ENABLED_UDP 0x04
144#define TMR_INT_ENABLED_CONFIG 0x20
145
146/* Set Configuraton Command Definitions */
147#define PERCENT_TX_BUFF 60
148#define TIME_BETWEEN_CONF_REQ 30
149#define TIME_BETWEEN_PAP_CHAP_REQ 30
150#define WAIT_PAP_CHAP_WITHOUT_REPLY 300
151#define WAIT_AFTER_DCD_CTS_LOW 5
152#define TIME_DCD_CTS_LOW_AFTER_LNK_DOWN 10
153#define WAIT_DCD_HIGH_AFTER_ENABLE_COMM 900
154#define MAX_CONF_REQ_WITHOUT_REPLY 10
155#define MAX_TERM_REQ_WITHOUT_REPLY 2
156#define NUM_CONF_NAK_WITHOUT_REPLY 5
157#define NUM_AUTH_REQ_WITHOUT_REPLY 10
158
159#define END_OFFSET 0x1F0
160
161
162/******Data Structures*****************************************************/
163
164/* This structure is placed in the private data area of the device structure.
165 * The card structure used to occupy the private area but now the following
166 * structure will incorporate the card structure along with PPP specific data
167 */
168
169typedef struct ppp_private_area
170{
171 struct net_device *slave;
172 sdla_t* card;
173 unsigned long router_start_time; /*router start time in sec */
174 unsigned long tick_counter; /*used for 5 second counter*/
175 unsigned mc; /*multicast support on or off*/
176 unsigned char enable_IPX;
177 unsigned long network_number;
178 unsigned char pap;
179 unsigned char chap;
180 unsigned char sysname[31]; /* system name for in-bnd auth*/
181 unsigned char userid[511]; /* list of user ids */
182 unsigned char passwd[511]; /* list of passwords */
183 unsigned protocol; /* SKB Protocol */
184 u32 ip_local; /* Local IP Address */
185 u32 ip_remote; /* remote IP Address */
186
187 u32 ip_local_tmp;
188 u32 ip_remote_tmp;
189
190 unsigned char timer_int_enabled; /* Who enabled the timer inter*/
191 unsigned char update_comms_stats; /* Used by update function */
192 unsigned long curr_trace_addr; /* Trace information */
193 unsigned long start_trace_addr;
194 unsigned long end_trace_addr;
195
196 unsigned char interface_down; /* Brind down interface when channel
197 goes down */
198 unsigned long config_wait_timeout; /* After if_open() if in dynamic if mode,
199 wait a few seconds before configuring */
200
201 unsigned short udp_pkt_lgth;
202 char udp_pkt_src;
203 char udp_pkt_data[MAX_LGTH_UDP_MGNT_PKT];
204
205 /* PPP specific statistics */
206
207 if_send_stat_t if_send_stat;
208 rx_intr_stat_t rx_intr_stat;
209 pipe_mgmt_stat_t pipe_mgmt_stat;
210
211 unsigned long router_up_time;
212
213 /* Polling work queue entry. Each interface
214 * has its own work queue entry, which is used
215 * to defer events from the interrupt */
216 struct work_struct poll_work;
217 struct timer_list poll_delay_timer;
218
219 u8 gateway;
220 u8 config_ppp;
221 u8 ip_error;
222
223}ppp_private_area_t;
224
225/* variable for keeping track of enabling/disabling FT1 monitor status */
226static int rCount = 0;
227
228extern void disable_irq(unsigned int);
229extern void enable_irq(unsigned int);
230
231/****** Function Prototypes *************************************************/
232
233/* WAN link driver entry points. These are called by the WAN router module. */
234static int update(struct wan_device *wandev);
235static int new_if(struct wan_device *wandev, struct net_device *dev,
236 wanif_conf_t *conf);
237static int del_if(struct wan_device *wandev, struct net_device *dev);
238
239/* WANPIPE-specific entry points */
240static int wpp_exec (struct sdla *card, void *u_cmd, void *u_data);
241
242/* Network device interface */
243static int if_init(struct net_device *dev);
244static int if_open(struct net_device *dev);
245static int if_close(struct net_device *dev);
246static int if_header(struct sk_buff *skb, struct net_device *dev,
247 unsigned short type,
248 void *daddr, void *saddr, unsigned len);
249
250static void if_tx_timeout(struct net_device *dev);
251
252static int if_rebuild_hdr(struct sk_buff *skb);
253static struct net_device_stats *if_stats(struct net_device *dev);
254static int if_send(struct sk_buff *skb, struct net_device *dev);
255
256
257/* PPP firmware interface functions */
258static int ppp_read_version(sdla_t *card, char *str);
259static int ppp_set_outbnd_auth(sdla_t *card, ppp_private_area_t *ppp_priv_area);
260static int ppp_set_inbnd_auth(sdla_t *card, ppp_private_area_t *ppp_priv_area);
261static int ppp_configure(sdla_t *card, void *data);
262static int ppp_set_intr_mode(sdla_t *card, unsigned char mode);
263static int ppp_comm_enable(sdla_t *card);
264static int ppp_comm_disable(sdla_t *card);
265static int ppp_comm_disable_shutdown(sdla_t *card);
266static int ppp_get_err_stats(sdla_t *card);
267static int ppp_send(sdla_t *card, void *data, unsigned len, unsigned proto);
268static int ppp_error(sdla_t *card, int err, ppp_mbox_t *mb);
269
270static void wpp_isr(sdla_t *card);
271static void rx_intr(sdla_t *card);
272static void event_intr(sdla_t *card);
273static void timer_intr(sdla_t *card);
274
275/* Background polling routines */
276static void process_route(sdla_t *card);
277static void retrigger_comm(sdla_t *card);
278
279/* Miscellaneous functions */
280static int read_info( sdla_t *card );
281static int read_connection_info (sdla_t *card);
282static void remove_route( sdla_t *card );
283static int config508(struct net_device *dev, sdla_t *card);
284static void show_disc_cause(sdla_t * card, unsigned cause);
285static int reply_udp( unsigned char *data, unsigned int mbox_len );
286static void process_udp_mgmt_pkt(sdla_t *card, struct net_device *dev,
287 ppp_private_area_t *ppp_priv_area);
288static void init_ppp_tx_rx_buff( sdla_t *card );
289static int intr_test( sdla_t *card );
290static int udp_pkt_type( struct sk_buff *skb , sdla_t *card);
291static void init_ppp_priv_struct( ppp_private_area_t *ppp_priv_area);
292static void init_global_statistics( sdla_t *card );
293static int tokenize(char *str, char **tokens);
294static char* strstrip(char *str, char *s);
295static int chk_bcast_mcast_addr(sdla_t* card, struct net_device* dev,
296 struct sk_buff *skb);
297
298static int config_ppp (sdla_t *);
299static void ppp_poll(struct net_device *dev);
300static void trigger_ppp_poll(struct net_device *dev);
301static void ppp_poll_delay (unsigned long dev_ptr);
302
303
304static int Read_connection_info;
305static int Intr_test_counter;
306static unsigned short available_buffer_space;
307
308
309/* IPX functions */
310static void switch_net_numbers(unsigned char *sendpacket, unsigned long network_number,
311 unsigned char incoming);
312static int handle_IPXWAN(unsigned char *sendpacket, char *devname, unsigned char enable_PX,
313 unsigned long network_number, unsigned short proto);
314
315/* Lock Functions */
316static void s508_lock (sdla_t *card, unsigned long *smp_flags);
317static void s508_unlock (sdla_t *card, unsigned long *smp_flags);
318
319static int store_udp_mgmt_pkt(char udp_pkt_src, sdla_t* card,
320 struct sk_buff *skb, struct net_device* dev,
321 ppp_private_area_t* ppp_priv_area );
322static unsigned short calc_checksum (char *data, int len);
323static void disable_comm (sdla_t *card);
324static int detect_and_fix_tx_bug (sdla_t *card);
325
326/****** Public Functions ****************************************************/
327
328/*============================================================================
329 * PPP protocol initialization routine.
330 *
331 * This routine is called by the main WANPIPE module during setup. At this
332 * point adapter is completely initialized and firmware is running.
333 * o read firmware version (to make sure it's alive)
334 * o configure adapter
335 * o initialize protocol-specific fields of the adapter data space.
336 *
337 * Return: 0 o.k.
338 * < 0 failure.
339 */
340int wpp_init(sdla_t *card, wandev_conf_t *conf)
341{
342 ppp_flags_t *flags;
343 union
344 {
345 char str[80];
346 } u;
347
348 /* Verify configuration ID */
349 if (conf->config_id != WANCONFIG_PPP) {
350
351 printk(KERN_INFO "%s: invalid configuration ID %u!\n",
352 card->devname, conf->config_id);
353 return -EINVAL;
354
355 }
356
357 /* Initialize miscellaneous pointers to structures on the adapter */
358 switch (card->hw.type) {
359
360 case SDLA_S508:
361 card->mbox =(void*)(card->hw.dpmbase + PPP508_MB_OFFS);
362 card->flags=(void*)(card->hw.dpmbase + PPP508_FLG_OFFS);
363 break;
364
365 case SDLA_S514:
366 card->mbox =(void*)(card->hw.dpmbase + PPP514_MB_OFFS);
367 card->flags=(void*)(card->hw.dpmbase + PPP514_FLG_OFFS);
368 break;
369
370 default:
371 return -EINVAL;
372
373 }
374 flags = card->flags;
375
376 /* Read firmware version. Note that when adapter initializes, it
377 * clears the mailbox, so it may appear that the first command was
378 * executed successfully when in fact it was merely erased. To work
379 * around this, we execute the first command twice.
380 */
381 if (ppp_read_version(card, NULL) || ppp_read_version(card, u.str))
382 return -EIO;
383
384 printk(KERN_INFO "%s: running PPP firmware v%s\n",card->devname, u.str);
385 /* Adjust configuration and set defaults */
386 card->wandev.mtu = (conf->mtu) ?
387 min_t(unsigned int, conf->mtu, PPP_MAX_MTU) : PPP_DFLT_MTU;
388
389 card->wandev.bps = conf->bps;
390 card->wandev.interface = conf->interface;
391 card->wandev.clocking = conf->clocking;
392 card->wandev.station = conf->station;
393 card->isr = &wpp_isr;
394 card->poll = NULL;
395 card->exec = &wpp_exec;
396 card->wandev.update = &update;
397 card->wandev.new_if = &new_if;
398 card->wandev.del_if = &del_if;
399 card->wandev.udp_port = conf->udp_port;
400 card->wandev.ttl = conf->ttl;
401 card->wandev.state = WAN_DISCONNECTED;
402 card->disable_comm = &disable_comm;
403 card->irq_dis_if_send_count = 0;
404 card->irq_dis_poll_count = 0;
405 card->u.p.authenticator = conf->u.ppp.authenticator;
406 card->u.p.ip_mode = conf->u.ppp.ip_mode ?
407 conf->u.ppp.ip_mode : WANOPT_PPP_STATIC;
408 card->TracingEnabled = 0;
409 Read_connection_info = 1;
410
411 /* initialize global statistics */
412 init_global_statistics( card );
413
414
415
416 if (!card->configured){
417 int err;
418
419 Intr_test_counter = 0;
420 err = intr_test(card);
421
422 if(err || (Intr_test_counter < MAX_INTR_TEST_COUNTER)) {
423 printk("%s: Interrupt Test Failed, Counter: %i\n",
424 card->devname, Intr_test_counter);
425 printk( "%s: Please choose another interrupt\n",card->devname);
426 return -EIO;
427 }
428
429 printk(KERN_INFO "%s: Interrupt Test Passed, Counter: %i\n",
430 card->devname, Intr_test_counter);
431 card->configured = 1;
432 }
433
434 ppp_set_intr_mode(card, PPP_INTR_TIMER);
435
436 /* Turn off the transmit and timer interrupt */
437 flags->imask &= ~PPP_INTR_TIMER;
438
439 printk(KERN_INFO "\n");
440
441 return 0;
442}
443
444/******* WAN Device Driver Entry Points *************************************/
445
446/*============================================================================
447 * Update device status & statistics.
448 */
449static int update(struct wan_device *wandev)
450{
451 sdla_t* card = wandev->private;
452 struct net_device* dev;
453 volatile ppp_private_area_t *ppp_priv_area;
454 ppp_flags_t *flags = card->flags;
455 unsigned long timeout;
456
457 /* sanity checks */
458 if ((wandev == NULL) || (wandev->private == NULL))
459 return -EFAULT;
460
461 if (wandev->state == WAN_UNCONFIGURED)
462 return -ENODEV;
463
464 /* Shutdown bug fix. This function can be
465 * called with NULL dev pointer during
466 * shutdown
467 */
468 if ((dev=card->wandev.dev) == NULL){
469 return -ENODEV;
470 }
471
472 if ((ppp_priv_area=dev->priv) == NULL){
473 return -ENODEV;
474 }
475
476 ppp_priv_area->update_comms_stats = 2;
477 ppp_priv_area->timer_int_enabled |= TMR_INT_ENABLED_UPDATE;
478 flags->imask |= PPP_INTR_TIMER;
479
480 /* wait a maximum of 1 second for the statistics to be updated */
481 timeout = jiffies;
482 for(;;) {
483 if(ppp_priv_area->update_comms_stats == 0){
484 break;
485 }
486 if (time_after(jiffies, timeout + 1 * HZ)){
487 ppp_priv_area->update_comms_stats = 0;
488 ppp_priv_area->timer_int_enabled &=
489 ~TMR_INT_ENABLED_UPDATE;
490 return -EAGAIN;
491 }
492 }
493
494 return 0;
495}
496
497/*============================================================================
498 * Create new logical channel.
499 * This routine is called by the router when ROUTER_IFNEW IOCTL is being
500 * handled.
501 * o parse media- and hardware-specific configuration
502 * o make sure that a new channel can be created
503 * o allocate resources, if necessary
504 * o prepare network device structure for registaration.
505 *
506 * Return: 0 o.k.
507 * < 0 failure (channel will not be created)
508 */
509static int new_if(struct wan_device *wandev, struct net_device *dev,
510 wanif_conf_t *conf)
511{
512 sdla_t *card = wandev->private;
513 ppp_private_area_t *ppp_priv_area;
514
515 if (wandev->ndev)
516 return -EEXIST;
517
518
519 printk(KERN_INFO "%s: Configuring Interface: %s\n",
520 card->devname, conf->name);
521
522 if ((conf->name[0] == '\0') || (strlen(conf->name) > WAN_IFNAME_SZ)) {
523
524 printk(KERN_INFO "%s: Invalid interface name!\n",
525 card->devname);
526 return -EINVAL;
527
528 }
529
530 /* allocate and initialize private data */
531 ppp_priv_area = kmalloc(sizeof(ppp_private_area_t), GFP_KERNEL);
532
533 if( ppp_priv_area == NULL )
534 return -ENOMEM;
535
536 memset(ppp_priv_area, 0, sizeof(ppp_private_area_t));
537
538 ppp_priv_area->card = card;
539
540 /* initialize data */
541 strcpy(card->u.p.if_name, conf->name);
542
543 /* initialize data in ppp_private_area structure */
544
545 init_ppp_priv_struct( ppp_priv_area );
546
547 ppp_priv_area->mc = conf->mc;
548 ppp_priv_area->pap = conf->pap;
549 ppp_priv_area->chap = conf->chap;
550
551 /* Option to bring down the interface when
552 * the link goes down */
553 if (conf->if_down){
554 set_bit(DYN_OPT_ON,&ppp_priv_area->interface_down);
555 printk("%s: Dynamic interface configuration enabled\n",
556 card->devname);
557 }
558
559 /* If no user ids are specified */
560 if(!strlen(conf->userid) && (ppp_priv_area->pap||ppp_priv_area->chap)){
561 kfree(ppp_priv_area);
562 return -EINVAL;
563 }
564
565 /* If no passwords are specified */
566 if(!strlen(conf->passwd) && (ppp_priv_area->pap||ppp_priv_area->chap)){
567 kfree(ppp_priv_area);
568 return -EINVAL;
569 }
570
571 if(strlen(conf->sysname) > 31){
572 kfree(ppp_priv_area);
573 return -EINVAL;
574 }
575
576 /* If no system name is specified */
577 if(!strlen(conf->sysname) && (card->u.p.authenticator)){
578 kfree(ppp_priv_area);
579 return -EINVAL;
580 }
581
582 /* copy the data into the ppp private structure */
583 memcpy(ppp_priv_area->userid, conf->userid, strlen(conf->userid));
584 memcpy(ppp_priv_area->passwd, conf->passwd, strlen(conf->passwd));
585 memcpy(ppp_priv_area->sysname, conf->sysname, strlen(conf->sysname));
586
587
588 ppp_priv_area->enable_IPX = conf->enable_IPX;
589 if (conf->network_number){
590 ppp_priv_area->network_number = conf->network_number;
591 }else{
592 ppp_priv_area->network_number = 0xDEADBEEF;
593 }
594
595 /* Tells us that if this interface is a
596 * gateway or not */
597 if ((ppp_priv_area->gateway = conf->gateway) == WANOPT_YES){
598 printk(KERN_INFO "%s: Interface %s is set as a gateway.\n",
599 card->devname,card->u.p.if_name);
600 }
601
602 /* prepare network device data space for registration */
603 strcpy(dev->name,card->u.p.if_name);
604
605 dev->init = &if_init;
606 dev->priv = ppp_priv_area;
607 dev->mtu = min_t(unsigned int, dev->mtu, card->wandev.mtu);
608
609 /* Initialize the polling work routine */
610 INIT_WORK(&ppp_priv_area->poll_work, (void*)(void*)ppp_poll, dev);
611
612 /* Initialize the polling delay timer */
613 init_timer(&ppp_priv_area->poll_delay_timer);
614 ppp_priv_area->poll_delay_timer.data = (unsigned long)dev;
615 ppp_priv_area->poll_delay_timer.function = ppp_poll_delay;
616
617
618 /* Since we start with dummy IP addresses we can say
619 * that route exists */
620 printk(KERN_INFO "\n");
621
622 return 0;
623}
624
625/*============================================================================
626 * Delete logical channel.
627 */
628static int del_if(struct wan_device *wandev, struct net_device *dev)
629{
630 return 0;
631}
632
633static void disable_comm (sdla_t *card)
634{
635 ppp_comm_disable_shutdown(card);
636 return;
637}
638
639/****** WANPIPE-specific entry points ***************************************/
640
641/*============================================================================
642 * Execute adapter interface command.
643 */
644
645//FIXME: Why do we need this ????
646static int wpp_exec(struct sdla *card, void *u_cmd, void *u_data)
647{
648 ppp_mbox_t *mbox = card->mbox;
649 int len;
650
651 if (copy_from_user((void*)&mbox->cmd, u_cmd, sizeof(ppp_cmd_t)))
652 return -EFAULT;
653
654 len = mbox->cmd.length;
655
656 if (len) {
657
658 if( copy_from_user((void*)&mbox->data, u_data, len))
659 return -EFAULT;
660
661 }
662
663 /* execute command */
664 if (!sdla_exec(mbox))
665 return -EIO;
666
667 /* return result */
668 if( copy_to_user(u_cmd, (void*)&mbox->cmd, sizeof(ppp_cmd_t)))
669 return -EFAULT;
670 len = mbox->cmd.length;
671
672 if (len && u_data && copy_to_user(u_data, (void*)&mbox->data, len))
673 return -EFAULT;
674
675 return 0;
676}
677
678/****** Network Device Interface ********************************************/
679
680/*============================================================================
681 * Initialize Linux network interface.
682 *
683 * This routine is called only once for each interface, during Linux network
684 * interface registration. Returning anything but zero will fail interface
685 * registration.
686 */
687static int if_init(struct net_device *dev)
688{
689 ppp_private_area_t *ppp_priv_area = dev->priv;
690 sdla_t *card = ppp_priv_area->card;
691 struct wan_device *wandev = &card->wandev;
692
693 /* Initialize device driver entry points */
694 dev->open = &if_open;
695 dev->stop = &if_close;
696 dev->hard_header = &if_header;
697 dev->rebuild_header = &if_rebuild_hdr;
698 dev->hard_start_xmit = &if_send;
699 dev->get_stats = &if_stats;
700 dev->tx_timeout = &if_tx_timeout;
701 dev->watchdog_timeo = TX_TIMEOUT;
702
703 /* Initialize media-specific parameters */
704 dev->type = ARPHRD_PPP; /* ARP h/w type */
705 dev->flags |= IFF_POINTOPOINT;
706 dev->flags |= IFF_NOARP;
707
708 /* Enable Mulitcasting if specified by user*/
709 if (ppp_priv_area->mc == WANOPT_YES){
710 dev->flags |= IFF_MULTICAST;
711 }
712
713 dev->mtu = wandev->mtu;
714 dev->hard_header_len = PPP_HDR_LEN; /* media header length */
715
716 /* Initialize hardware parameters (just for reference) */
717 dev->irq = wandev->irq;
718 dev->dma = wandev->dma;
719 dev->base_addr = wandev->ioport;
720 dev->mem_start = wandev->maddr;
721 dev->mem_end = wandev->maddr + wandev->msize - 1;
722
723 /* Set transmit buffer queue length */
724 dev->tx_queue_len = 100;
725 SET_MODULE_OWNER(dev);
726
727 return 0;
728}
729
730/*============================================================================
731 * Open network interface.
732 * o enable communications and interrupts.
733 * o prevent module from unloading by incrementing use count
734 *
735 * Return 0 if O.k. or errno.
736 */
737static int if_open(struct net_device *dev)
738{
739 ppp_private_area_t *ppp_priv_area = dev->priv;
740 sdla_t *card = ppp_priv_area->card;
741 struct timeval tv;
742 //unsigned long smp_flags;
743
744 if (netif_running(dev))
745 return -EBUSY;
746
747 wanpipe_open(card);
748
749 netif_start_queue(dev);
750
751 do_gettimeofday( &tv );
752 ppp_priv_area->router_start_time = tv.tv_sec;
753
754 /* We cannot configure the card here because we don't
755 * have access to the interface IP addresses.
756 * Once the interface initilization is complete, we will be
757 * able to access the IP addresses. Therefore,
758 * configure the ppp link in the poll routine */
759 set_bit(0,&ppp_priv_area->config_ppp);
760 ppp_priv_area->config_wait_timeout=jiffies;
761
762 /* Start the PPP configuration after 1sec delay.
763 * This will give the interface initilization time
764 * to finish its configuration */
765 mod_timer(&ppp_priv_area->poll_delay_timer, jiffies + HZ);
766 return 0;
767}
768
769/*============================================================================
770 * Close network interface.
771 * o if this is the last open, then disable communications and interrupts.
772 * o reset flags.
773 */
774static int if_close(struct net_device *dev)
775{
776 ppp_private_area_t *ppp_priv_area = dev->priv;
777 sdla_t *card = ppp_priv_area->card;
778
779 netif_stop_queue(dev);
780 wanpipe_close(card);
781
782 del_timer (&ppp_priv_area->poll_delay_timer);
783 return 0;
784}
785
786/*============================================================================
787 * Build media header.
788 *
789 * The trick here is to put packet type (Ethertype) into 'protocol' field of
790 * the socket buffer, so that we don't forget it. If packet type is not
791 * supported, set skb->protocol to 0 and discard packet later.
792 *
793 * Return: media header length.
794 */
795static int if_header(struct sk_buff *skb, struct net_device *dev,
796 unsigned short type, void *daddr, void *saddr, unsigned len)
797{
798 switch (type)
799 {
800 case ETH_P_IP:
801 case ETH_P_IPX:
802 skb->protocol = htons(type);
803 break;
804
805 default:
806 skb->protocol = 0;
807 }
808
809 return PPP_HDR_LEN;
810}
811
812/*============================================================================
813 * Re-build media header.
814 *
815 * Return: 1 physical address resolved.
816 * 0 physical address not resolved
817 */
818static int if_rebuild_hdr (struct sk_buff *skb)
819{
820 struct net_device *dev = skb->dev;
821 ppp_private_area_t *ppp_priv_area = dev->priv;
822 sdla_t *card = ppp_priv_area->card;
823
824 printk(KERN_INFO "%s: rebuild_header() called for interface %s!\n",
825 card->devname, dev->name);
826 return 1;
827}
828
829/*============================================================================
830 * Handle transmit timeout event from netif watchdog
831 */
832static void if_tx_timeout(struct net_device *dev)
833{
834 ppp_private_area_t* chan = dev->priv;
835 sdla_t *card = chan->card;
836
837 /* If our device stays busy for at least 5 seconds then we will
838 * kick start the device by making dev->tbusy = 0. We expect
839 * that our device never stays busy more than 5 seconds. So this
840 * is only used as a last resort.
841 */
842
843 ++ chan->if_send_stat.if_send_tbusy;
844 ++card->wandev.stats.collisions;
845
846 printk (KERN_INFO "%s: Transmit timed out on %s\n", card->devname,dev->name);
847 ++chan->if_send_stat.if_send_tbusy_timeout;
848 netif_wake_queue (dev);
849}
850
851
852
853/*============================================================================
854 * Send a packet on a network interface.
855 * o set tbusy flag (marks start of the transmission) to block a timer-based
856 * transmit from overlapping.
857 * o check link state. If link is not up, then drop the packet.
858 * o execute adapter send command.
859 * o free socket buffer
860 *
861 * Return: 0 complete (socket buffer must be freed)
862 * non-0 packet may be re-transmitted (tbusy must be set)
863 *
864 * Notes:
865 * 1. This routine is called either by the protocol stack or by the "net
866 * bottom half" (with interrupts enabled).
867 * 2. Setting tbusy flag will inhibit further transmit requests from the
868 * protocol stack and can be used for flow control with protocol layer.
869 */
870static int if_send (struct sk_buff *skb, struct net_device *dev)
871{
872 ppp_private_area_t *ppp_priv_area = dev->priv;
873 sdla_t *card = ppp_priv_area->card;
874 unsigned char *sendpacket;
875 unsigned long smp_flags;
876 ppp_flags_t *flags = card->flags;
877 int udp_type;
878 int err=0;
879
880 ++ppp_priv_area->if_send_stat.if_send_entry;
881
882 netif_stop_queue(dev);
883
884 if (skb == NULL) {
885
886 /* If we get here, some higher layer thinks we've missed an
887 * tx-done interrupt.
888 */
889 printk(KERN_INFO "%s: interface %s got kicked!\n",
890 card->devname, dev->name);
891
892 ++ppp_priv_area->if_send_stat.if_send_skb_null;
893
894 netif_wake_queue(dev);
895 return 0;
896 }
897
898 sendpacket = skb->data;
899
900 udp_type = udp_pkt_type( skb, card );
901
902
903 if (udp_type == UDP_PTPIPE_TYPE){
904 if(store_udp_mgmt_pkt(UDP_PKT_FRM_STACK, card, skb, dev,
905 ppp_priv_area)){
906 flags->imask |= PPP_INTR_TIMER;
907 }
908 ++ppp_priv_area->if_send_stat.if_send_PIPE_request;
909 netif_start_queue(dev);
910 return 0;
911 }
912
913 /* Check for broadcast and multicast addresses
914 * If found, drop (deallocate) a packet and return.
915 */
916 if(chk_bcast_mcast_addr(card, dev, skb)){
917 ++card->wandev.stats.tx_dropped;
918 dev_kfree_skb_any(skb);
919 netif_start_queue(dev);
920 return 0;
921 }
922
923
924 if(card->hw.type != SDLA_S514){
925 s508_lock(card,&smp_flags);
926 }
927
928 if (test_and_set_bit(SEND_CRIT, (void*)&card->wandev.critical)) {
929
930 printk(KERN_INFO "%s: Critical in if_send: %lx\n",
931 card->wandev.name,card->wandev.critical);
932
933 ++card->wandev.stats.tx_dropped;
934 ++ppp_priv_area->if_send_stat.if_send_critical_non_ISR;
935 netif_start_queue(dev);
936 goto if_send_exit_crit;
937 }
938
939 if (card->wandev.state != WAN_CONNECTED) {
940
941 ++ppp_priv_area->if_send_stat.if_send_wan_disconnected;
942 ++card->wandev.stats.tx_dropped;
943 netif_start_queue(dev);
944
945 } else if (!skb->protocol) {
946 ++ppp_priv_area->if_send_stat.if_send_protocol_error;
947 ++card->wandev.stats.tx_errors;
948 netif_start_queue(dev);
949
950 } else {
951
952 /*If it's IPX change the network numbers to 0 if they're ours.*/
953 if( skb->protocol == htons(ETH_P_IPX) ) {
954 if(ppp_priv_area->enable_IPX) {
955 switch_net_numbers( skb->data,
956 ppp_priv_area->network_number, 0);
957 } else {
958 ++card->wandev.stats.tx_dropped;
959 netif_start_queue(dev);
960 goto if_send_exit_crit;
961 }
962 }
963
964 if (ppp_send(card, skb->data, skb->len, skb->protocol)) {
965 netif_stop_queue(dev);
966 ++ppp_priv_area->if_send_stat.if_send_adptr_bfrs_full;
967 ++ppp_priv_area->if_send_stat.if_send_tx_int_enabled;
968 } else {
969 ++ppp_priv_area->if_send_stat.if_send_bfr_passed_to_adptr;
970 ++card->wandev.stats.tx_packets;
971 card->wandev.stats.tx_bytes += skb->len;
972 netif_start_queue(dev);
973 dev->trans_start = jiffies;
974 }
975 }
976
977if_send_exit_crit:
978
979 if (!(err=netif_queue_stopped(dev))){
980 dev_kfree_skb_any(skb);
981 }else{
982 ppp_priv_area->tick_counter = jiffies;
983 flags->imask |= PPP_INTR_TXRDY; /* unmask Tx interrupts */
984 }
985
986 clear_bit(SEND_CRIT,&card->wandev.critical);
987 if(card->hw.type != SDLA_S514){
988 s508_unlock(card,&smp_flags);
989 }
990
991 return err;
992}
993
994
995/*=============================================================================
996 * Store a UDP management packet for later processing.
997 */
998
999static int store_udp_mgmt_pkt(char udp_pkt_src, sdla_t* card,
1000 struct sk_buff *skb, struct net_device* dev,
1001 ppp_private_area_t* ppp_priv_area )
1002{
1003 int udp_pkt_stored = 0;
1004
1005 if(!ppp_priv_area->udp_pkt_lgth && (skb->len<=MAX_LGTH_UDP_MGNT_PKT)){
1006 ppp_priv_area->udp_pkt_lgth = skb->len;
1007 ppp_priv_area->udp_pkt_src = udp_pkt_src;
1008 memcpy(ppp_priv_area->udp_pkt_data, skb->data, skb->len);
1009 ppp_priv_area->timer_int_enabled |= TMR_INT_ENABLED_UDP;
1010 ppp_priv_area->protocol = skb->protocol;
1011 udp_pkt_stored = 1;
1012 }else{
1013 if (skb->len > MAX_LGTH_UDP_MGNT_PKT){
1014 printk(KERN_INFO "%s: PIPEMON UDP request too long : %i\n",
1015 card->devname, skb->len);
1016 }else{
1017 printk(KERN_INFO "%s: PIPEMON UPD request already pending\n",
1018 card->devname);
1019 }
1020 ppp_priv_area->udp_pkt_lgth = 0;
1021 }
1022
1023 if(udp_pkt_src == UDP_PKT_FRM_STACK){
1024 dev_kfree_skb_any(skb);
1025 }else{
1026 dev_kfree_skb_any(skb);
1027 }
1028
1029 return(udp_pkt_stored);
1030}
1031
1032
1033
1034/*============================================================================
1035 * Reply to UDP Management system.
1036 * Return length of reply.
1037 */
1038static int reply_udp( unsigned char *data, unsigned int mbox_len )
1039{
1040 unsigned short len, udp_length, temp, ip_length;
1041 unsigned long ip_temp;
1042 int even_bound = 0;
1043 ppp_udp_pkt_t *p_udp_pkt = (ppp_udp_pkt_t *)data;
1044
1045 /* Set length of packet */
1046 len = sizeof(ip_pkt_t)+
1047 sizeof(udp_pkt_t)+
1048 sizeof(wp_mgmt_t)+
1049 sizeof(cblock_t)+
1050 mbox_len;
1051
1052 /* fill in UDP reply */
1053 p_udp_pkt->wp_mgmt.request_reply = UDPMGMT_REPLY;
1054
1055 /* fill in UDP length */
1056 udp_length = sizeof(udp_pkt_t)+
1057 sizeof(wp_mgmt_t)+
1058 sizeof(cblock_t)+
1059 mbox_len;
1060
1061
1062 /* put it on an even boundary */
1063 if ( udp_length & 0x0001 ) {
1064 udp_length += 1;
1065 len += 1;
1066 even_bound=1;
1067 }
1068
1069 temp = (udp_length<<8)|(udp_length>>8);
1070 p_udp_pkt->udp_pkt.udp_length = temp;
1071
1072
1073 /* swap UDP ports */
1074 temp = p_udp_pkt->udp_pkt.udp_src_port;
1075 p_udp_pkt->udp_pkt.udp_src_port =
1076 p_udp_pkt->udp_pkt.udp_dst_port;
1077 p_udp_pkt->udp_pkt.udp_dst_port = temp;
1078
1079
1080 /* add UDP pseudo header */
1081 temp = 0x1100;
1082 *((unsigned short *)(p_udp_pkt->data+mbox_len+even_bound)) = temp;
1083 temp = (udp_length<<8)|(udp_length>>8);
1084 *((unsigned short *)(p_udp_pkt->data+mbox_len+even_bound+2)) = temp;
1085
1086 /* calculate UDP checksum */
1087 p_udp_pkt->udp_pkt.udp_checksum = 0;
1088 p_udp_pkt->udp_pkt.udp_checksum =
1089 calc_checksum(&data[UDP_OFFSET],udp_length+UDP_OFFSET);
1090
1091 /* fill in IP length */
1092 ip_length = udp_length + sizeof(ip_pkt_t);
1093 temp = (ip_length<<8)|(ip_length>>8);
1094 p_udp_pkt->ip_pkt.total_length = temp;
1095
1096 /* swap IP addresses */
1097 ip_temp = p_udp_pkt->ip_pkt.ip_src_address;
1098 p_udp_pkt->ip_pkt.ip_src_address = p_udp_pkt->ip_pkt.ip_dst_address;
1099 p_udp_pkt->ip_pkt.ip_dst_address = ip_temp;
1100
1101 /* fill in IP checksum */
1102 p_udp_pkt->ip_pkt.hdr_checksum = 0;
1103 p_udp_pkt->ip_pkt.hdr_checksum = calc_checksum(data,sizeof(ip_pkt_t));
1104
1105 return len;
1106
1107} /* reply_udp */
1108
1109unsigned short calc_checksum (char *data, int len)
1110{
1111 unsigned short temp;
1112 unsigned long sum=0;
1113 int i;
1114
1115 for( i = 0; i <len; i+=2 ) {
1116 memcpy(&temp,&data[i],2);
1117 sum += (unsigned long)temp;
1118 }
1119
1120 while (sum >> 16 ) {
1121 sum = (sum & 0xffffUL) + (sum >> 16);
1122 }
1123
1124 temp = (unsigned short)sum;
1125 temp = ~temp;
1126
1127 if( temp == 0 )
1128 temp = 0xffff;
1129
1130 return temp;
1131}
1132
1133/*
1134 If incoming is 0 (outgoing)- if the net numbers is ours make it 0
1135 if incoming is 1 - if the net number is 0 make it ours
1136
1137*/
1138static void switch_net_numbers(unsigned char *sendpacket, unsigned long network_number, unsigned char incoming)
1139{
1140 unsigned long pnetwork_number;
1141
1142 pnetwork_number = (unsigned long)((sendpacket[6] << 24) +
1143 (sendpacket[7] << 16) + (sendpacket[8] << 8) +
1144 sendpacket[9]);
1145
1146 if (!incoming) {
1147 //If the destination network number is ours, make it 0
1148 if( pnetwork_number == network_number) {
1149 sendpacket[6] = sendpacket[7] = sendpacket[8] =
1150 sendpacket[9] = 0x00;
1151 }
1152 } else {
1153 //If the incoming network is 0, make it ours
1154 if( pnetwork_number == 0) {
1155 sendpacket[6] = (unsigned char)(network_number >> 24);
1156 sendpacket[7] = (unsigned char)((network_number &
1157 0x00FF0000) >> 16);
1158 sendpacket[8] = (unsigned char)((network_number &
1159 0x0000FF00) >> 8);
1160 sendpacket[9] = (unsigned char)(network_number &
1161 0x000000FF);
1162 }
1163 }
1164
1165
1166 pnetwork_number = (unsigned long)((sendpacket[18] << 24) +
1167 (sendpacket[19] << 16) + (sendpacket[20] << 8) +
1168 sendpacket[21]);
1169
1170 if( !incoming ) {
1171 //If the source network is ours, make it 0
1172 if( pnetwork_number == network_number) {
1173 sendpacket[18] = sendpacket[19] = sendpacket[20] =
1174 sendpacket[21] = 0x00;
1175 }
1176 } else {
1177 //If the source network is 0, make it ours
1178 if( pnetwork_number == 0 ) {
1179 sendpacket[18] = (unsigned char)(network_number >> 24);
1180 sendpacket[19] = (unsigned char)((network_number &
1181 0x00FF0000) >> 16);
1182 sendpacket[20] = (unsigned char)((network_number &
1183 0x0000FF00) >> 8);
1184 sendpacket[21] = (unsigned char)(network_number &
1185 0x000000FF);
1186 }
1187 }
1188} /* switch_net_numbers */
1189
1190/*============================================================================
1191 * Get ethernet-style interface statistics.
1192 * Return a pointer to struct net_device_stats.
1193 */
1194static struct net_device_stats *if_stats(struct net_device *dev)
1195{
1196
1197 ppp_private_area_t *ppp_priv_area = dev->priv;
1198 sdla_t* card;
1199
1200 if( ppp_priv_area == NULL )
1201 return NULL;
1202
1203 card = ppp_priv_area->card;
1204 return &card->wandev.stats;
1205}
1206
1207/****** PPP Firmware Interface Functions ************************************/
1208
1209/*============================================================================
1210 * Read firmware code version.
1211 * Put code version as ASCII string in str.
1212 */
1213static int ppp_read_version(sdla_t *card, char *str)
1214{
1215 ppp_mbox_t *mb = card->mbox;
1216 int err;
1217
1218 memset(&mb->cmd, 0, sizeof(ppp_cmd_t));
1219 mb->cmd.command = PPP_READ_CODE_VERSION;
1220 err = sdla_exec(mb) ? mb->cmd.result : CMD_TIMEOUT;
1221
1222 if (err != CMD_OK)
1223
1224 ppp_error(card, err, mb);
1225
1226 else if (str) {
1227
1228 int len = mb->cmd.length;
1229
1230 memcpy(str, mb->data, len);
1231 str[len] = '\0';
1232
1233 }
1234
1235 return err;
1236}
1237/*===========================================================================
1238 * Set Out-Bound Authentication.
1239*/
1240static int ppp_set_outbnd_auth (sdla_t *card, ppp_private_area_t *ppp_priv_area)
1241{
1242 ppp_mbox_t *mb = card->mbox;
1243 int err;
1244
1245 memset(&mb->cmd, 0, sizeof(ppp_cmd_t));
1246 memset(&mb->data, 0, (strlen(ppp_priv_area->userid) +
1247 strlen(ppp_priv_area->passwd) + 2 ) );
1248 memcpy(mb->data, ppp_priv_area->userid, strlen(ppp_priv_area->userid));
1249 memcpy((mb->data + strlen(ppp_priv_area->userid) + 1),
1250 ppp_priv_area->passwd, strlen(ppp_priv_area->passwd));
1251
1252 mb->cmd.length = strlen(ppp_priv_area->userid) +
1253 strlen(ppp_priv_area->passwd) + 2 ;
1254
1255 mb->cmd.command = PPP_SET_OUTBOUND_AUTH;
1256
1257 err = sdla_exec(mb) ? mb->cmd.result : CMD_TIMEOUT;
1258
1259 if (err != CMD_OK)
1260 ppp_error(card, err, mb);
1261
1262 return err;
1263}
1264
1265/*===========================================================================
1266 * Set In-Bound Authentication.
1267*/
1268static int ppp_set_inbnd_auth (sdla_t *card, ppp_private_area_t *ppp_priv_area)
1269{
1270 ppp_mbox_t *mb = card->mbox;
1271 int err, i;
1272 char* user_tokens[32];
1273 char* pass_tokens[32];
1274 int userids, passwds;
1275 int add_ptr;
1276
1277 memset(&mb->cmd, 0, sizeof(ppp_cmd_t));
1278 memset(&mb->data, 0, 1008);
1279 memcpy(mb->data, ppp_priv_area->sysname,
1280 strlen(ppp_priv_area->sysname));
1281
1282 /* Parse the userid string and the password string and build a string
1283 to copy it to the data area of the command structure. The string
1284 will look like "SYS_NAME<NULL>USER1<NULL>PASS1<NULL>USER2<NULL>PASS2
1285 ....<NULL> "
1286 */
1287 userids = tokenize( ppp_priv_area->userid, user_tokens);
1288 passwds = tokenize( ppp_priv_area->passwd, pass_tokens);
1289
1290 if (userids != passwds){
1291 printk(KERN_INFO "%s: Number of passwords does not equal the number of user ids\n", card->devname);
1292 return 1;
1293 }
1294
1295 add_ptr = strlen(ppp_priv_area->sysname) + 1;
1296 for (i=0; i<userids; i++){
1297 memcpy((mb->data + add_ptr), user_tokens[i],
1298 strlen(user_tokens[i]));
1299 memcpy((mb->data + add_ptr + strlen(user_tokens[i]) + 1),
1300 pass_tokens[i], strlen(pass_tokens[i]));
1301 add_ptr = add_ptr + strlen(user_tokens[i]) + 1 +
1302 strlen(pass_tokens[i]) + 1;
1303 }
1304
1305 mb->cmd.length = add_ptr + 1;
1306 mb->cmd.command = PPP_SET_INBOUND_AUTH;
1307
1308 err = sdla_exec(mb) ? mb->cmd.result : CMD_TIMEOUT;
1309
1310 if (err != CMD_OK)
1311 ppp_error(card, err, mb);
1312
1313 return err;
1314}
1315
1316
1317/*============================================================================
1318 * Tokenize string.
1319 * Parse a string of the following syntax:
1320 * <arg1>,<arg2>,...
1321 * and fill array of tokens with pointers to string elements.
1322 *
1323 */
1324static int tokenize (char *str, char **tokens)
1325{
1326 int cnt = 0;
1327
1328 tokens[0] = strsep(&str, "/");
1329 while (tokens[cnt] && (cnt < 32 - 1))
1330 {
1331 tokens[cnt] = strstrip(tokens[cnt], " \t");
1332 tokens[++cnt] = strsep(&str, "/");
1333 }
1334 return cnt;
1335}
1336
1337/*============================================================================
1338 * Strip leading and trailing spaces off the string str.
1339 */
1340static char* strstrip (char *str, char* s)
1341{
1342 char *eos = str + strlen(str); /* -> end of string */
1343
1344 while (*str && strchr(s, *str))
1345 ++str /* strip leading spaces */
1346 ;
1347 while ((eos > str) && strchr(s, *(eos - 1)))
1348 --eos /* strip trailing spaces */
1349 ;
1350 *eos = '\0';
1351 return str;
1352}
1353/*============================================================================
1354 * Configure PPP firmware.
1355 */
1356static int ppp_configure(sdla_t *card, void *data)
1357{
1358 ppp_mbox_t *mb = card->mbox;
1359 int data_len = sizeof(ppp508_conf_t);
1360 int err;
1361
1362 memset(&mb->cmd, 0, sizeof(ppp_cmd_t));
1363 memcpy(mb->data, data, data_len);
1364 mb->cmd.length = data_len;
1365 mb->cmd.command = PPP_SET_CONFIG;
1366 err = sdla_exec(mb) ? mb->cmd.result : CMD_TIMEOUT;
1367
1368 if (err != CMD_OK)
1369 ppp_error(card, err, mb);
1370
1371 return err;
1372}
1373
1374/*============================================================================
1375 * Set interrupt mode.
1376 */
1377static int ppp_set_intr_mode(sdla_t *card, unsigned char mode)
1378{
1379 ppp_mbox_t *mb = card->mbox;
1380 ppp_intr_info_t *ppp_intr_data = (ppp_intr_info_t *) &mb->data[0];
1381 int err;
1382
1383 memset(&mb->cmd, 0, sizeof(ppp_cmd_t));
1384 ppp_intr_data->i_enable = mode;
1385
1386 ppp_intr_data->irq = card->hw.irq;
1387 mb->cmd.length = 2;
1388
1389 /* If timer has been enabled, set the timer delay to 1sec */
1390 if (mode & 0x80){
1391 ppp_intr_data->timer_len = 250; //5;//100; //250;
1392 mb->cmd.length = 4;
1393 }
1394
1395 mb->cmd.command = PPP_SET_INTR_FLAGS;
1396 err = sdla_exec(mb) ? mb->cmd.result : CMD_TIMEOUT;
1397
1398 if (err != CMD_OK)
1399 ppp_error(card, err, mb);
1400
1401
1402 return err;
1403}
1404
1405/*============================================================================
1406 * Enable communications.
1407 */
1408static int ppp_comm_enable(sdla_t *card)
1409{
1410 ppp_mbox_t *mb = card->mbox;
1411 int err;
1412
1413 memset(&mb->cmd, 0, sizeof(ppp_cmd_t));
1414 mb->cmd.command = PPP_COMM_ENABLE;
1415 err = sdla_exec(mb) ? mb->cmd.result : CMD_TIMEOUT;
1416
1417 if (err != CMD_OK)
1418 ppp_error(card, err, mb);
1419 else
1420 card->u.p.comm_enabled = 1;
1421
1422 return err;
1423}
1424
1425/*============================================================================
1426 * Disable communications.
1427 */
1428static int ppp_comm_disable(sdla_t *card)
1429{
1430 ppp_mbox_t *mb = card->mbox;
1431 int err;
1432
1433 memset(&mb->cmd, 0, sizeof(ppp_cmd_t));
1434 mb->cmd.command = PPP_COMM_DISABLE;
1435 err = sdla_exec(mb) ? mb->cmd.result : CMD_TIMEOUT;
1436 if (err != CMD_OK)
1437 ppp_error(card, err, mb);
1438 else
1439 card->u.p.comm_enabled = 0;
1440
1441 return err;
1442}
1443
1444static int ppp_comm_disable_shutdown(sdla_t *card)
1445{
1446 ppp_mbox_t *mb = card->mbox;
1447 ppp_intr_info_t *ppp_intr_data;
1448 int err;
1449
1450 if (!mb){
1451 return 1;
1452 }
1453
1454 ppp_intr_data = (ppp_intr_info_t *) &mb->data[0];
1455
1456 /* Disable all interrupts */
1457 memset(&mb->cmd, 0, sizeof(ppp_cmd_t));
1458 ppp_intr_data->i_enable = 0;
1459
1460 ppp_intr_data->irq = card->hw.irq;
1461 mb->cmd.length = 2;
1462
1463 mb->cmd.command = PPP_SET_INTR_FLAGS;
1464 err = sdla_exec(mb) ? mb->cmd.result : CMD_TIMEOUT;
1465
1466 /* Disable communicatinons */
1467 memset(&mb->cmd, 0, sizeof(ppp_cmd_t));
1468 mb->cmd.command = PPP_COMM_DISABLE;
1469 err = sdla_exec(mb) ? mb->cmd.result : CMD_TIMEOUT;
1470
1471 card->u.p.comm_enabled = 0;
1472
1473 return 0;
1474}
1475
1476
1477
1478/*============================================================================
1479 * Get communications error statistics.
1480 */
1481static int ppp_get_err_stats(sdla_t *card)
1482{
1483 ppp_mbox_t *mb = card->mbox;
1484 int err;
1485
1486 memset(&mb->cmd, 0, sizeof(ppp_cmd_t));
1487 mb->cmd.command = PPP_READ_ERROR_STATS;
1488 err = sdla_exec(mb) ? mb->cmd.result : CMD_TIMEOUT;
1489
1490 if (err == CMD_OK) {
1491
1492 ppp_err_stats_t* stats = (void*)mb->data;
1493 card->wandev.stats.rx_over_errors = stats->rx_overrun;
1494 card->wandev.stats.rx_crc_errors = stats->rx_bad_crc;
1495 card->wandev.stats.rx_missed_errors = stats->rx_abort;
1496 card->wandev.stats.rx_length_errors = stats->rx_lost;
1497 card->wandev.stats.tx_aborted_errors = stats->tx_abort;
1498
1499 } else
1500 ppp_error(card, err, mb);
1501
1502 return err;
1503}
1504
1505/*============================================================================
1506 * Send packet.
1507 * Return: 0 - o.k.
1508 * 1 - no transmit buffers available
1509 */
1510static int ppp_send (sdla_t *card, void *data, unsigned len, unsigned proto)
1511{
1512 ppp_buf_ctl_t *txbuf = card->u.p.txbuf;
1513
1514 if (txbuf->flag)
1515 return 1;
1516
1517 sdla_poke(&card->hw, txbuf->buf.ptr, data, len);
1518
1519 txbuf->length = len; /* frame length */
1520
1521 if (proto == htons(ETH_P_IPX))
1522 txbuf->proto = 0x01; /* protocol ID */
1523 else
1524 txbuf->proto = 0x00; /* protocol ID */
1525
1526 txbuf->flag = 1; /* start transmission */
1527
1528 /* Update transmit buffer control fields */
1529 card->u.p.txbuf = ++txbuf;
1530
1531 if ((void*)txbuf > card->u.p.txbuf_last)
1532 card->u.p.txbuf = card->u.p.txbuf_base;
1533
1534 return 0;
1535}
1536
1537/****** Firmware Error Handler **********************************************/
1538
1539/*============================================================================
1540 * Firmware error handler.
1541 * This routine is called whenever firmware command returns non-zero
1542 * return code.
1543 *
1544 * Return zero if previous command has to be cancelled.
1545 */
1546static int ppp_error(sdla_t *card, int err, ppp_mbox_t *mb)
1547{
1548 unsigned cmd = mb->cmd.command;
1549
1550 switch (err) {
1551
1552 case CMD_TIMEOUT:
1553 printk(KERN_ERR "%s: command 0x%02X timed out!\n",
1554 card->devname, cmd);
1555 break;
1556
1557 default:
1558 printk(KERN_INFO "%s: command 0x%02X returned 0x%02X!\n"
1559 , card->devname, cmd, err);
1560 }
1561
1562 return 0;
1563}
1564
1565/****** Interrupt Handlers **************************************************/
1566
1567/*============================================================================
1568 * PPP interrupt service routine.
1569 */
1570static void wpp_isr (sdla_t *card)
1571{
1572 ppp_flags_t *flags = card->flags;
1573 char *ptr = &flags->iflag;
1574 struct net_device *dev = card->wandev.dev;
1575 int i;
1576
1577 card->in_isr = 1;
1578 ++card->statistics.isr_entry;
1579
1580 if (!dev && flags->iflag != PPP_INTR_CMD){
1581 card->in_isr = 0;
1582 flags->iflag = 0;
1583 return;
1584 }
1585
1586 if (test_bit(PERI_CRIT, (void*)&card->wandev.critical)) {
1587 card->in_isr = 0;
1588 flags->iflag = 0;
1589 return;
1590 }
1591
1592
1593 if(card->hw.type != SDLA_S514){
1594 if (test_bit(SEND_CRIT, (void*)&card->wandev.critical)) {
1595 ++card->statistics.isr_already_critical;
1596 printk (KERN_INFO "%s: Critical while in ISR!\n",
1597 card->devname);
1598 card->in_isr = 0;
1599 flags->iflag = 0;
1600 return;
1601 }
1602 }
1603
1604 switch (flags->iflag) {
1605
1606 case PPP_INTR_RXRDY: /* receive interrupt 0x01 (bit 0)*/
1607 ++card->statistics.isr_rx;
1608 rx_intr(card);
1609 break;
1610
1611 case PPP_INTR_TXRDY: /* transmit interrupt 0x02 (bit 1)*/
1612 ++card->statistics.isr_tx;
1613 flags->imask &= ~PPP_INTR_TXRDY;
1614 netif_wake_queue(dev);
1615 break;
1616
1617 case PPP_INTR_CMD: /* interface command completed */
1618 ++Intr_test_counter;
1619 ++card->statistics.isr_intr_test;
1620 break;
1621
1622 case PPP_INTR_MODEM: /* modem status change (DCD, CTS) 0x04 (bit 2)*/
1623 case PPP_INTR_DISC: /* Data link disconnected 0x10 (bit 4)*/
1624 case PPP_INTR_OPEN: /* Data link open 0x20 (bit 5)*/
1625 case PPP_INTR_DROP_DTR: /* DTR drop timeout expired 0x40 bit 6 */
1626 event_intr(card);
1627 break;
1628
1629 case PPP_INTR_TIMER:
1630 timer_intr(card);
1631 break;
1632
1633 default: /* unexpected interrupt */
1634 ++card->statistics.isr_spurious;
1635 printk(KERN_INFO "%s: spurious interrupt 0x%02X!\n",
1636 card->devname, flags->iflag);
1637 printk(KERN_INFO "%s: ID Bytes = ",card->devname);
1638 for(i = 0; i < 8; i ++)
1639 printk(KERN_INFO "0x%02X ", *(ptr + 0x28 + i));
1640 printk(KERN_INFO "\n");
1641 }
1642
1643 card->in_isr = 0;
1644 flags->iflag = 0;
1645 return;
1646}
1647
1648/*============================================================================
1649 * Receive interrupt handler.
1650 */
1651static void rx_intr(sdla_t *card)
1652{
1653 ppp_buf_ctl_t *rxbuf = card->rxmb;
1654 struct net_device *dev = card->wandev.dev;
1655 ppp_private_area_t *ppp_priv_area;
1656 struct sk_buff *skb;
1657 unsigned len;
1658 void *buf;
1659 int i;
1660 ppp_flags_t *flags = card->flags;
1661 char *ptr = &flags->iflag;
1662 int udp_type;
1663
1664
1665 if (rxbuf->flag != 0x01) {
1666
1667 printk(KERN_INFO
1668 "%s: corrupted Rx buffer @ 0x%X, flag = 0x%02X!\n",
1669 card->devname, (unsigned)rxbuf, rxbuf->flag);
1670
1671 printk(KERN_INFO "%s: ID Bytes = ",card->devname);
1672
1673 for(i = 0; i < 8; i ++)
1674 printk(KERN_INFO "0x%02X ", *(ptr + 0x28 + i));
1675 printk(KERN_INFO "\n");
1676
1677 ++card->statistics.rx_intr_corrupt_rx_bfr;
1678
1679
1680 /* Bug Fix: Mar 6 2000
1681 * If we get a corrupted mailbox, it means that driver
1682 * is out of sync with the firmware. There is no recovery.
1683 * If we don't turn off all interrupts for this card
1684 * the machine will crash.
1685 */
1686 printk(KERN_INFO "%s: Critical router failure ...!!!\n", card->devname);
1687 printk(KERN_INFO "Please contact Sangoma Technologies !\n");
1688 ppp_set_intr_mode(card,0);
1689 return;
1690 }
1691
1692 if (dev && netif_running(dev) && dev->priv){
1693
1694 len = rxbuf->length;
1695 ppp_priv_area = dev->priv;
1696
1697 /* Allocate socket buffer */
1698 skb = dev_alloc_skb(len);
1699
1700 if (skb != NULL) {
1701
1702 /* Copy data to the socket buffer */
1703 unsigned addr = rxbuf->buf.ptr;
1704
1705 if ((addr + len) > card->u.p.rx_top + 1) {
1706
1707 unsigned tmp = card->u.p.rx_top - addr + 1;
1708 buf = skb_put(skb, tmp);
1709 sdla_peek(&card->hw, addr, buf, tmp);
1710 addr = card->u.p.rx_base;
1711 len -= tmp;
1712 }
1713 buf = skb_put(skb, len);
1714 sdla_peek(&card->hw, addr, buf, len);
1715
1716 /* Decapsulate packet */
1717 switch (rxbuf->proto) {
1718
1719 case 0x00:
1720 skb->protocol = htons(ETH_P_IP);
1721 break;
1722
1723 case 0x01:
1724 skb->protocol = htons(ETH_P_IPX);
1725 break;
1726 }
1727
1728 udp_type = udp_pkt_type( skb, card );
1729
1730 if (udp_type == UDP_PTPIPE_TYPE){
1731
1732 /* Handle a UDP Request in Timer Interrupt */
1733 if(store_udp_mgmt_pkt(UDP_PKT_FRM_NETWORK, card, skb, dev,
1734 ppp_priv_area)){
1735 flags->imask |= PPP_INTR_TIMER;
1736 }
1737 ++ppp_priv_area->rx_intr_stat.rx_intr_PIPE_request;
1738
1739
1740 } else if (handle_IPXWAN(skb->data,card->devname,
1741 ppp_priv_area->enable_IPX,
1742 ppp_priv_area->network_number,
1743 skb->protocol)) {
1744
1745 /* Handle an IPXWAN packet */
1746 if( ppp_priv_area->enable_IPX) {
1747
1748 /* Make sure we are not already sending */
1749 if (!test_bit(SEND_CRIT, &card->wandev.critical)){
1750 ppp_send(card, skb->data, skb->len, htons(ETH_P_IPX));
1751 }
1752 dev_kfree_skb_any(skb);
1753
1754 } else {
1755 ++card->wandev.stats.rx_dropped;
1756 }
1757 } else {
1758 /* Pass data up the protocol stack */
1759 skb->dev = dev;
1760 skb->mac.raw = skb->data;
1761
1762 ++card->wandev.stats.rx_packets;
1763 card->wandev.stats.rx_bytes += skb->len;
1764 ++ppp_priv_area->rx_intr_stat.rx_intr_bfr_passed_to_stack;
1765 netif_rx(skb);
1766 dev->last_rx = jiffies;
1767 }
1768
1769 } else {
1770
1771 if (net_ratelimit()){
1772 printk(KERN_INFO "%s: no socket buffers available!\n",
1773 card->devname);
1774 }
1775 ++card->wandev.stats.rx_dropped;
1776 ++ppp_priv_area->rx_intr_stat.rx_intr_no_socket;
1777 }
1778
1779 } else {
1780 ++card->statistics.rx_intr_dev_not_started;
1781 }
1782
1783 /* Release buffer element and calculate a pointer to the next one */
1784 rxbuf->flag = 0x00;
1785 card->rxmb = ++rxbuf;
1786 if ((void*)rxbuf > card->u.p.rxbuf_last)
1787 card->rxmb = card->u.p.rxbuf_base;
1788}
1789
1790
1791void event_intr (sdla_t *card)
1792{
1793
1794 struct net_device* dev = card->wandev.dev;
1795 ppp_private_area_t* ppp_priv_area = dev->priv;
1796 volatile ppp_flags_t *flags = card->flags;
1797
1798 switch (flags->iflag){
1799
1800 case PPP_INTR_MODEM: /* modem status change (DCD, CTS) 0x04 (bit 2)*/
1801
1802 if (net_ratelimit()){
1803 printk (KERN_INFO "%s: Modem status: DCD=%s CTS=%s\n",
1804 card->devname, DCD(flags->mstatus), CTS(flags->mstatus));
1805 }
1806 break;
1807
1808 case PPP_INTR_DISC: /* Data link disconnected 0x10 (bit 4)*/
1809
1810 NEX_PRINTK (KERN_INFO "Data link disconnected intr Cause %X\n",
1811 flags->disc_cause);
1812
1813 if (flags->disc_cause &
1814 (PPP_LOCAL_TERMINATION | PPP_DCD_CTS_DROP |
1815 PPP_REMOTE_TERMINATION)) {
1816
1817 if (card->u.p.ip_mode == WANOPT_PPP_PEER) {
1818 set_bit(0,&Read_connection_info);
1819 }
1820 wanpipe_set_state(card, WAN_DISCONNECTED);
1821
1822 show_disc_cause(card, flags->disc_cause);
1823 ppp_priv_area->timer_int_enabled |= TMR_INT_ENABLED_PPP_EVENT;
1824 flags->imask |= PPP_INTR_TIMER;
1825 trigger_ppp_poll(dev);
1826 }
1827 break;
1828
1829 case PPP_INTR_OPEN: /* Data link open 0x20 (bit 5)*/
1830
1831 NEX_PRINTK (KERN_INFO "%s: PPP Link Open, LCP=%s IP=%s\n",
1832 card->devname,LCP(flags->lcp_state),
1833 IP(flags->ip_state));
1834
1835 if (flags->lcp_state == 0x09 &&
1836 (flags->ip_state == 0x09 || flags->ipx_state == 0x09)){
1837
1838 /* Initialize the polling timer and set the state
1839 * to WAN_CONNNECTED */
1840
1841
1842 /* BUG FIX: When the protocol restarts, during heavy
1843 * traffic, board tx buffers and driver tx buffers
1844 * can go out of sync. This checks the condition
1845 * and if the tx buffers are out of sync, the
1846 * protocols are restarted.
1847 * I don't know why the board tx buffer is out
1848 * of sync. It could be that a packets is tx
1849 * while the link is down, but that is not
1850 * possible. The other possiblility is that the
1851 * firmware doesn't reinitialize properly.
1852 * FIXME: A better fix should be found.
1853 */
1854 if (detect_and_fix_tx_bug(card)){
1855
1856 ppp_comm_disable(card);
1857
1858 wanpipe_set_state(card, WAN_DISCONNECTED);
1859
1860 ppp_priv_area->timer_int_enabled |=
1861 TMR_INT_ENABLED_PPP_EVENT;
1862 flags->imask |= PPP_INTR_TIMER;
1863 break;
1864 }
1865
1866 card->state_tick = jiffies;
1867 wanpipe_set_state(card, WAN_CONNECTED);
1868
1869 NEX_PRINTK(KERN_INFO "CON: L Tx: %lx B Tx: %lx || L Rx %lx B Rx %lx\n",
1870 (unsigned long)card->u.p.txbuf, *card->u.p.txbuf_next,
1871 (unsigned long)card->rxmb, *card->u.p.rxbuf_next);
1872
1873 /* Tell timer interrupt that PPP event occurred */
1874 ppp_priv_area->timer_int_enabled |= TMR_INT_ENABLED_PPP_EVENT;
1875 flags->imask |= PPP_INTR_TIMER;
1876
1877 /* If we are in PEER mode, we must first obtain the
1878 * IP information and then go into the poll routine */
1879 if (card->u.p.ip_mode != WANOPT_PPP_PEER){
1880 trigger_ppp_poll(dev);
1881 }
1882 }
1883 break;
1884
1885 case PPP_INTR_DROP_DTR: /* DTR drop timeout expired 0x40 bit 6 */
1886
1887 NEX_PRINTK(KERN_INFO "DTR Drop Timeout Interrrupt \n");
1888
1889 if (card->u.p.ip_mode == WANOPT_PPP_PEER) {
1890 set_bit(0,&Read_connection_info);
1891 }
1892
1893 wanpipe_set_state(card, WAN_DISCONNECTED);
1894
1895 show_disc_cause(card, flags->disc_cause);
1896 ppp_priv_area->timer_int_enabled |= TMR_INT_ENABLED_PPP_EVENT;
1897 flags->imask |= PPP_INTR_TIMER;
1898 trigger_ppp_poll(dev);
1899 break;
1900
1901 default:
1902 printk(KERN_INFO "%s: Error, Invalid PPP Event\n",card->devname);
1903 }
1904}
1905
1906
1907
1908/* TIMER INTERRUPT */
1909
1910void timer_intr (sdla_t *card)
1911{
1912
1913 struct net_device* dev = card->wandev.dev;
1914 ppp_private_area_t* ppp_priv_area = dev->priv;
1915 ppp_flags_t *flags = card->flags;
1916
1917
1918 if (ppp_priv_area->timer_int_enabled & TMR_INT_ENABLED_CONFIG){
1919 if (!config_ppp(card)){
1920 ppp_priv_area->timer_int_enabled &=
1921 ~TMR_INT_ENABLED_CONFIG;
1922 }
1923 }
1924
1925 /* Update statistics */
1926 if (ppp_priv_area->timer_int_enabled & TMR_INT_ENABLED_UPDATE){
1927 ppp_get_err_stats(card);
1928 if(!(--ppp_priv_area->update_comms_stats)){
1929 ppp_priv_area->timer_int_enabled &=
1930 ~TMR_INT_ENABLED_UPDATE;
1931 }
1932 }
1933
1934 /* PPIPEMON UDP request */
1935
1936 if (ppp_priv_area->timer_int_enabled & TMR_INT_ENABLED_UDP){
1937 process_udp_mgmt_pkt(card,dev, ppp_priv_area);
1938 ppp_priv_area->timer_int_enabled &= ~TMR_INT_ENABLED_UDP;
1939 }
1940
1941 /* PPP Event */
1942 if (ppp_priv_area->timer_int_enabled & TMR_INT_ENABLED_PPP_EVENT){
1943
1944 if (card->wandev.state == WAN_DISCONNECTED){
1945 retrigger_comm(card);
1946 }
1947
1948 /* If the state is CONNECTING, it means that communicatins were
1949 * enabled. When the remote side enables its comminication we
1950 * should get an interrupt PPP_INTR_OPEN, thus turn off polling
1951 */
1952
1953 else if (card->wandev.state == WAN_CONNECTING){
1954 /* Turn off the timer interrupt */
1955 ppp_priv_area->timer_int_enabled &= ~TMR_INT_ENABLED_PPP_EVENT;
1956 }
1957
1958 /* If state is connected and we are in PEER mode
1959 * poll for an IP address which will be provided by remote end.
1960 */
1961 else if ((card->wandev.state == WAN_CONNECTED &&
1962 card->u.p.ip_mode == WANOPT_PPP_PEER) &&
1963 test_bit(0,&Read_connection_info)){
1964
1965 card->state_tick = jiffies;
1966 if (read_connection_info (card)){
1967 printk(KERN_INFO "%s: Failed to read PEER IP Addresses\n",
1968 card->devname);
1969 }else{
1970 clear_bit(0,&Read_connection_info);
1971 set_bit(1,&Read_connection_info);
1972 trigger_ppp_poll(dev);
1973 }
1974 }else{
1975 //FIXME Put the comment back int
1976 ppp_priv_area->timer_int_enabled &= ~TMR_INT_ENABLED_PPP_EVENT;
1977 }
1978
1979 }/* End of PPP_EVENT */
1980
1981
1982 /* Only disable the timer interrupt if there are no udp, statistic */
1983 /* updates or events pending */
1984 if(!ppp_priv_area->timer_int_enabled) {
1985 flags->imask &= ~PPP_INTR_TIMER;
1986 }
1987}
1988
1989
1990static int handle_IPXWAN(unsigned char *sendpacket, char *devname, unsigned char enable_IPX, unsigned long network_number, unsigned short proto)
1991{
1992 int i;
1993
1994 if( proto == htons(ETH_P_IPX) ) {
1995 //It's an IPX packet
1996 if(!enable_IPX) {
1997 //Return 1 so we don't pass it up the stack.
1998 return 1;
1999 }
2000 } else {
2001 //It's not IPX so pass it up the stack.
2002 return 0;
2003 }
2004
2005 if( sendpacket[16] == 0x90 &&
2006 sendpacket[17] == 0x04)
2007 {
2008 //It's IPXWAN
2009
2010 if( sendpacket[2] == 0x02 &&
2011 sendpacket[34] == 0x00)
2012 {
2013 //It's a timer request packet
2014 printk(KERN_INFO "%s: Received IPXWAN Timer Request packet\n",devname);
2015
2016 //Go through the routing options and answer no to every
2017 //option except Unnumbered RIP/SAP
2018 for(i = 41; sendpacket[i] == 0x00; i += 5)
2019 {
2020 //0x02 is the option for Unnumbered RIP/SAP
2021 if( sendpacket[i + 4] != 0x02)
2022 {
2023 sendpacket[i + 1] = 0;
2024 }
2025 }
2026
2027 //Skip over the extended Node ID option
2028 if( sendpacket[i] == 0x04 )
2029 {
2030 i += 8;
2031 }
2032
2033 //We also want to turn off all header compression opt.
2034 for(; sendpacket[i] == 0x80 ;)
2035 {
2036 sendpacket[i + 1] = 0;
2037 i += (sendpacket[i + 2] << 8) + (sendpacket[i + 3]) + 4;
2038 }
2039
2040 //Set the packet type to timer response
2041 sendpacket[34] = 0x01;
2042
2043 printk(KERN_INFO "%s: Sending IPXWAN Timer Response\n",devname);
2044 }
2045 else if( sendpacket[34] == 0x02 )
2046 {
2047 //This is an information request packet
2048 printk(KERN_INFO "%s: Received IPXWAN Information Request packet\n",devname);
2049
2050 //Set the packet type to information response
2051 sendpacket[34] = 0x03;
2052
2053 //Set the router name
2054 sendpacket[51] = 'P';
2055 sendpacket[52] = 'T';
2056 sendpacket[53] = 'P';
2057 sendpacket[54] = 'I';
2058 sendpacket[55] = 'P';
2059 sendpacket[56] = 'E';
2060 sendpacket[57] = '-';
2061 sendpacket[58] = CVHexToAscii(network_number >> 28);
2062 sendpacket[59] = CVHexToAscii((network_number & 0x0F000000)>> 24);
2063 sendpacket[60] = CVHexToAscii((network_number & 0x00F00000)>> 20);
2064 sendpacket[61] = CVHexToAscii((network_number & 0x000F0000)>> 16);
2065 sendpacket[62] = CVHexToAscii((network_number & 0x0000F000)>> 12);
2066 sendpacket[63] = CVHexToAscii((network_number & 0x00000F00)>> 8);
2067 sendpacket[64] = CVHexToAscii((network_number & 0x000000F0)>> 4);
2068 sendpacket[65] = CVHexToAscii(network_number & 0x0000000F);
2069 for(i = 66; i < 99; i+= 1)
2070 {
2071 sendpacket[i] = 0;
2072 }
2073
2074 printk(KERN_INFO "%s: Sending IPXWAN Information Response packet\n",devname);
2075 }
2076 else
2077 {
2078 printk(KERN_INFO "%s: Unknown IPXWAN packet!\n",devname);
2079 return 0;
2080 }
2081
2082 //Set the WNodeID to our network address
2083 sendpacket[35] = (unsigned char)(network_number >> 24);
2084 sendpacket[36] = (unsigned char)((network_number & 0x00FF0000) >> 16);
2085 sendpacket[37] = (unsigned char)((network_number & 0x0000FF00) >> 8);
2086 sendpacket[38] = (unsigned char)(network_number & 0x000000FF);
2087
2088 return 1;
2089 } else {
2090 //If we get here it's an IPX-data packet, so it'll get passed up the stack.
2091
2092 //switch the network numbers
2093 switch_net_numbers(sendpacket, network_number, 1);
2094 return 0;
2095 }
2096}
2097
2098/****** Background Polling Routines ****************************************/
2099
2100/* All polling functions are invoked by the TIMER interrupt in the wpp_isr
2101 * routine.
2102 */
2103
2104/*============================================================================
2105 * Monitor active link phase.
2106 */
2107static void process_route (sdla_t *card)
2108{
2109 ppp_flags_t *flags = card->flags;
2110 struct net_device *dev = card->wandev.dev;
2111 ppp_private_area_t *ppp_priv_area = dev->priv;
2112
2113 if ((card->u.p.ip_mode == WANOPT_PPP_PEER) &&
2114 (flags->ip_state == 0x09)){
2115
2116 /* We get ip_local from the firmware in PEER mode.
2117 * Therefore, if ip_local is 0, we failed to obtain
2118 * the remote IP address. */
2119 if (ppp_priv_area->ip_local == 0)
2120 return;
2121
2122 printk(KERN_INFO "%s: IPCP State Opened.\n", card->devname);
2123 if (read_info( card )) {
2124 printk(KERN_INFO
2125 "%s: An error occurred in IP assignment.\n",
2126 card->devname);
2127 } else {
2128 struct in_device *in_dev = dev->ip_ptr;
2129 if (in_dev != NULL ) {
2130 struct in_ifaddr *ifa = in_dev->ifa_list;
2131
2132 printk(KERN_INFO "%s: Assigned Lcl. Addr: %u.%u.%u.%u\n",
2133 card->devname, NIPQUAD(ifa->ifa_local));
2134 printk(KERN_INFO "%s: Assigned Rmt. Addr: %u.%u.%u.%u\n",
2135 card->devname, NIPQUAD(ifa->ifa_address));
2136 }else{
2137 printk(KERN_INFO
2138 "%s: Error: Failed to add a route for PPP interface %s\n",
2139 card->devname,dev->name);
2140 }
2141 }
2142 }
2143}
2144
2145/*============================================================================
2146 * Monitor physical link disconnected phase.
2147 * o if interface is up and the hold-down timeout has expired, then retry
2148 * connection.
2149 */
2150static void retrigger_comm(sdla_t *card)
2151{
2152 struct net_device *dev = card->wandev.dev;
2153
2154 if (dev && ((jiffies - card->state_tick) > HOLD_DOWN_TIME)) {
2155
2156 wanpipe_set_state(card, WAN_CONNECTING);
2157
2158 if(ppp_comm_enable(card) == CMD_OK){
2159 init_ppp_tx_rx_buff( card );
2160 }
2161 }
2162}
2163
2164/****** Miscellaneous Functions *********************************************/
2165
2166/*============================================================================
2167 * Configure S508 adapter.
2168 */
2169static int config508(struct net_device *dev, sdla_t *card)
2170{
2171 ppp508_conf_t cfg;
2172 struct in_device *in_dev = dev->ip_ptr;
2173 ppp_private_area_t *ppp_priv_area = dev->priv;
2174
2175 /* Prepare PPP configuration structure */
2176 memset(&cfg, 0, sizeof(ppp508_conf_t));
2177
2178 if (card->wandev.clocking)
2179 cfg.line_speed = card->wandev.bps;
2180
2181 if (card->wandev.interface == WANOPT_RS232)
2182 cfg.conf_flags |= INTERFACE_LEVEL_RS232;
2183
2184
2185 cfg.conf_flags |= DONT_TERMINATE_LNK_MAX_CONFIG; /*send Configure-Request packets forever*/
2186 cfg.txbuf_percent = PERCENT_TX_BUFF; /* % of Tx bufs */
2187 cfg.mtu_local = card->wandev.mtu;
2188 cfg.mtu_remote = card->wandev.mtu; /* Default */
2189 cfg.restart_tmr = TIME_BETWEEN_CONF_REQ; /* 30 = 3sec */
2190 cfg.auth_rsrt_tmr = TIME_BETWEEN_PAP_CHAP_REQ; /* 30 = 3sec */
2191 cfg.auth_wait_tmr = WAIT_PAP_CHAP_WITHOUT_REPLY; /* 300 = 30s */
2192 cfg.mdm_fail_tmr = WAIT_AFTER_DCD_CTS_LOW; /* 5 = 0.5s */
2193 cfg.dtr_drop_tmr = TIME_DCD_CTS_LOW_AFTER_LNK_DOWN; /* 10 = 1s */
2194 cfg.connect_tmout = WAIT_DCD_HIGH_AFTER_ENABLE_COMM; /* 900 = 90s */
2195 cfg.conf_retry = MAX_CONF_REQ_WITHOUT_REPLY; /* 10 = 1s */
2196 cfg.term_retry = MAX_TERM_REQ_WITHOUT_REPLY; /* 2 times */
2197 cfg.fail_retry = NUM_CONF_NAK_WITHOUT_REPLY; /* 5 times */
2198 cfg.auth_retry = NUM_AUTH_REQ_WITHOUT_REPLY; /* 10 times */
2199
2200
2201 if( !card->u.p.authenticator ) {
2202 printk(KERN_INFO "%s: Device is not configured as an authenticator\n",
2203 card->devname);
2204 cfg.auth_options = NO_AUTHENTICATION;
2205 }else{
2206 printk(KERN_INFO "%s: Device is configured as an authenticator\n",
2207 card->devname);
2208 cfg.auth_options = INBOUND_AUTH;
2209 }
2210
2211 if( ppp_priv_area->pap == WANOPT_YES){
2212 cfg.auth_options |=PAP_AUTH;
2213 printk(KERN_INFO "%s: Pap enabled\n", card->devname);
2214 }
2215 if( ppp_priv_area->chap == WANOPT_YES){
2216 cfg.auth_options |= CHAP_AUTH;
2217 printk(KERN_INFO "%s: Chap enabled\n", card->devname);
2218 }
2219
2220
2221 if (ppp_priv_area->enable_IPX == WANOPT_YES){
2222 printk(KERN_INFO "%s: Enabling IPX Protocol\n",card->devname);
2223 cfg.ipx_options = ENABLE_IPX | ROUTING_PROT_DEFAULT;
2224 }else{
2225 cfg.ipx_options = DISABLE_IPX;
2226 }
2227
2228 switch (card->u.p.ip_mode) {
2229
2230 case WANOPT_PPP_STATIC:
2231
2232 printk(KERN_INFO "%s: PPP IP Mode: STATIC\n",card->devname);
2233 cfg.ip_options = L_AND_R_IP_NO_ASSIG |
2234 ENABLE_IP;
2235 cfg.ip_local = in_dev->ifa_list->ifa_local;
2236 cfg.ip_remote = in_dev->ifa_list->ifa_address;
2237 /* Debugging code used to check that IP addresses
2238 * obtained from the kernel are correct */
2239
2240 NEX_PRINTK(KERN_INFO "Local %u.%u.%u.%u Remote %u.%u.%u.%u Name %s\n",
2241 NIPQUAD(ip_local),NIPQUAD(ip_remote), dev->name);
2242 break;
2243
2244 case WANOPT_PPP_HOST:
2245
2246 printk(KERN_INFO "%s: PPP IP Mode: HOST\n",card->devname);
2247 cfg.ip_options = L_IP_LOCAL_ASSIG |
2248 R_IP_LOCAL_ASSIG |
2249 ENABLE_IP;
2250 cfg.ip_local = in_dev->ifa_list->ifa_local;
2251 cfg.ip_remote = in_dev->ifa_list->ifa_address;
2252 /* Debugging code used to check that IP addresses
2253 * obtained from the kernel are correct */
2254 NEX_PRINTK (KERN_INFO "Local %u.%u.%u.%u Remote %u.%u.%u.%u Name %s\n",
2255 NIPQUAD(ip_local),NIPQUAD(ip_remote), dev->name);
2256
2257 break;
2258
2259 case WANOPT_PPP_PEER:
2260
2261 printk(KERN_INFO "%s: PPP IP Mode: PEER\n",card->devname);
2262 cfg.ip_options = L_IP_REMOTE_ASSIG |
2263 R_IP_REMOTE_ASSIG |
2264 ENABLE_IP;
2265 cfg.ip_local = 0x00;
2266 cfg.ip_remote = 0x00;
2267 break;
2268
2269 default:
2270 printk(KERN_INFO "%s: ERROR: Unsupported PPP Mode Selected\n",
2271 card->devname);
2272 printk(KERN_INFO "%s: PPP IP Modes: STATIC, PEER or HOST\n",
2273 card->devname);
2274 return 1;
2275 }
2276
2277 return ppp_configure(card, &cfg);
2278}
2279
2280/*============================================================================
2281 * Show disconnection cause.
2282 */
2283static void show_disc_cause(sdla_t *card, unsigned cause)
2284{
2285 if (cause & 0x0802)
2286
2287 printk(KERN_INFO "%s: link terminated by peer\n",
2288 card->devname);
2289
2290 else if (cause & 0x0004)
2291
2292 printk(KERN_INFO "%s: link terminated by user\n",
2293 card->devname);
2294
2295 else if (cause & 0x0008)
2296
2297 printk(KERN_INFO "%s: authentication failed\n", card->devname);
2298
2299 else if (cause & 0x0010)
2300
2301 printk(KERN_INFO
2302 "%s: authentication protocol negotiation failed\n",
2303 card->devname);
2304
2305 else if (cause & 0x0020)
2306
2307 printk(KERN_INFO
2308 "%s: peer's request for authentication rejected\n",
2309 card->devname);
2310
2311 else if (cause & 0x0040)
2312
2313 printk(KERN_INFO "%s: MRU option rejected by peer\n",
2314 card->devname);
2315
2316 else if (cause & 0x0080)
2317
2318 printk(KERN_INFO "%s: peer's MRU was too small\n",
2319 card->devname);
2320
2321 else if (cause & 0x0100)
2322
2323 printk(KERN_INFO "%s: failed to negotiate peer's LCP options\n",
2324 card->devname);
2325
2326 else if (cause & 0x0200)
2327
2328 printk(KERN_INFO "%s: failed to negotiate peer's IPCP options\n"
2329 , card->devname);
2330
2331 else if (cause & 0x0400)
2332
2333 printk(KERN_INFO
2334 "%s: failed to negotiate peer's IPXCP options\n",
2335 card->devname);
2336}
2337
2338/*=============================================================================
2339 * Process UDP call of type PTPIPEAB.
2340 */
2341static void process_udp_mgmt_pkt(sdla_t *card, struct net_device *dev,
2342 ppp_private_area_t *ppp_priv_area )
2343{
2344 unsigned char buf2[5];
2345 unsigned char *buf;
2346 unsigned int frames, len;
2347 struct sk_buff *new_skb;
2348 unsigned short data_length, buffer_length, real_len;
2349 unsigned long data_ptr;
2350 int udp_mgmt_req_valid = 1;
2351 ppp_mbox_t *mbox = card->mbox;
2352 struct timeval tv;
2353 int err;
2354 ppp_udp_pkt_t *ppp_udp_pkt = (ppp_udp_pkt_t*)&ppp_priv_area->udp_pkt_data;
2355
2356 memcpy(&buf2, &card->wandev.udp_port, 2 );
2357
2358
2359 if(ppp_priv_area->udp_pkt_src == UDP_PKT_FRM_NETWORK) {
2360
2361 switch(ppp_udp_pkt->cblock.command) {
2362
2363 case PPIPE_GET_IBA_DATA:
2364 case PPP_READ_CONFIG:
2365 case PPP_GET_CONNECTION_INFO:
2366 case PPIPE_ROUTER_UP_TIME:
2367 case PPP_READ_STATISTICS:
2368 case PPP_READ_ERROR_STATS:
2369 case PPP_READ_PACKET_STATS:
2370 case PPP_READ_LCP_STATS:
2371 case PPP_READ_IPCP_STATS:
2372 case PPP_READ_IPXCP_STATS:
2373 case PPP_READ_PAP_STATS:
2374 case PPP_READ_CHAP_STATS:
2375 case PPP_READ_CODE_VERSION:
2376 udp_mgmt_req_valid = 1;
2377 break;
2378
2379 default:
2380 udp_mgmt_req_valid = 0;
2381 break;
2382 }
2383 }
2384
2385 if(!udp_mgmt_req_valid) {
2386
2387 /* set length to 0 */
2388 ppp_udp_pkt->cblock.length = 0x00;
2389
2390 /* set return code */
2391 ppp_udp_pkt->cblock.result = 0xCD;
2392 ++ppp_priv_area->pipe_mgmt_stat.UDP_PIPE_mgmt_direction_err;
2393
2394 if (net_ratelimit()){
2395 printk(KERN_INFO
2396 "%s: Warning, Illegal UDP command attempted from network: %x\n",
2397 card->devname,ppp_udp_pkt->cblock.command);
2398 }
2399 } else {
2400 /* Initialize the trace element */
2401 trace_element_t trace_element;
2402
2403 switch (ppp_udp_pkt->cblock.command){
2404
2405 /* PPIPE_ENABLE_TRACING */
2406 case PPIPE_ENABLE_TRACING:
2407 if (!card->TracingEnabled) {
2408
2409 /* OPERATE_DATALINE_MONITOR */
2410 mbox->cmd.command = PPP_DATALINE_MONITOR;
2411 mbox->cmd.length = 0x01;
2412 mbox->data[0] = ppp_udp_pkt->data[0];
2413 err = sdla_exec(mbox) ?
2414 mbox->cmd.result : CMD_TIMEOUT;
2415
2416 if (err != CMD_OK) {
2417
2418 ppp_error(card, err, mbox);
2419 card->TracingEnabled = 0;
2420
2421 /* set the return code */
2422
2423 ppp_udp_pkt->cblock.result = mbox->cmd.result;
2424 mbox->cmd.length = 0;
2425 break;
2426 }
2427
2428 sdla_peek(&card->hw, 0xC000, &buf2, 2);
2429
2430 ppp_priv_area->curr_trace_addr = 0;
2431 memcpy(&ppp_priv_area->curr_trace_addr, &buf2, 2);
2432 ppp_priv_area->start_trace_addr =
2433 ppp_priv_area->curr_trace_addr;
2434 ppp_priv_area->end_trace_addr =
2435 ppp_priv_area->start_trace_addr + END_OFFSET;
2436
2437 /* MAX_SEND_BUFFER_SIZE - 28 (IP header)
2438 - 32 (ppipemon CBLOCK) */
2439 available_buffer_space = MAX_LGTH_UDP_MGNT_PKT -
2440 sizeof(ip_pkt_t)-
2441 sizeof(udp_pkt_t)-
2442 sizeof(wp_mgmt_t)-
2443 sizeof(cblock_t);
2444 }
2445 ppp_udp_pkt->cblock.result = 0;
2446 mbox->cmd.length = 0;
2447 card->TracingEnabled = 1;
2448 break;
2449
2450 /* PPIPE_DISABLE_TRACING */
2451 case PPIPE_DISABLE_TRACING:
2452
2453 if(card->TracingEnabled) {
2454
2455 /* OPERATE_DATALINE_MONITOR */
2456 mbox->cmd.command = 0x33;
2457 mbox->cmd.length = 1;
2458 mbox->data[0] = 0x00;
2459 err = sdla_exec(mbox) ?
2460 mbox->cmd.result : CMD_TIMEOUT;
2461
2462 }
2463
2464 /*set return code*/
2465 ppp_udp_pkt->cblock.result = 0;
2466 mbox->cmd.length = 0;
2467 card->TracingEnabled = 0;
2468 break;
2469
2470 /* PPIPE_GET_TRACE_INFO */
2471 case PPIPE_GET_TRACE_INFO:
2472
2473 if(!card->TracingEnabled) {
2474 /* set return code */
2475 ppp_udp_pkt->cblock.result = 1;
2476 mbox->cmd.length = 0;
2477 }
2478
2479 buffer_length = 0;
2480
2481 /* frames < 62, where 62 is the number of trace
2482 information elements. There is in total 496
2483 bytes of space and each trace information
2484 element is 8 bytes.
2485 */
2486 for ( frames=0; frames<62; frames++) {
2487
2488 trace_pkt_t *trace_pkt = (trace_pkt_t *)
2489 &ppp_udp_pkt->data[buffer_length];
2490
2491 /* Read the whole trace packet */
2492 sdla_peek(&card->hw, ppp_priv_area->curr_trace_addr,
2493 &trace_element, sizeof(trace_element_t));
2494
2495 /* no data on board so exit */
2496 if( trace_element.opp_flag == 0x00 )
2497 break;
2498
2499 data_ptr = trace_element.trace_data_ptr;
2500
2501 /* See if there is actual data on the trace buffer */
2502 if (data_ptr){
2503 data_length = trace_element.trace_length;
2504 }else{
2505 data_length = 0;
2506 ppp_udp_pkt->data[0] |= 0x02;
2507 }
2508
2509 //FIXME: Do we need this check
2510 if ((available_buffer_space - buffer_length)
2511 < (sizeof(trace_element_t)+1)){
2512
2513 /*indicate we have more frames
2514 * on board and exit
2515 */
2516 ppp_udp_pkt->data[0] |= 0x02;
2517 break;
2518 }
2519
2520 trace_pkt->status = trace_element.trace_type;
2521 trace_pkt->time_stamp = trace_element.trace_time_stamp;
2522 trace_pkt->real_length = trace_element.trace_length;
2523
2524 real_len = trace_element.trace_length;
2525
2526 if(data_ptr == 0){
2527 trace_pkt->data_avail = 0x00;
2528 }else{
2529 /* we can take it next time */
2530 if ((available_buffer_space - buffer_length)<
2531 (real_len + sizeof(trace_pkt_t))){
2532
2533 ppp_udp_pkt->data[0] |= 0x02;
2534 break;
2535 }
2536 trace_pkt->data_avail = 0x01;
2537
2538 /* get the data */
2539 sdla_peek(&card->hw, data_ptr,
2540 &trace_pkt->data,
2541 real_len);
2542 }
2543 /* zero the opp flag to
2544 show we got the frame */
2545 buf2[0] = 0x00;
2546 sdla_poke(&card->hw, ppp_priv_area->curr_trace_addr,
2547 &buf2, 1);
2548
2549 /* now move onto the next
2550 frame */
2551 ppp_priv_area->curr_trace_addr += 8;
2552
2553 /* check if we passed the last address */
2554 if ( ppp_priv_area->curr_trace_addr >=
2555 ppp_priv_area->end_trace_addr){
2556
2557 ppp_priv_area->curr_trace_addr =
2558 ppp_priv_area->start_trace_addr;
2559 }
2560
2561 /* update buffer length and make sure its even */
2562
2563 if ( trace_pkt->data_avail == 0x01 ) {
2564 buffer_length += real_len - 1;
2565 }
2566
2567 /* for the header */
2568 buffer_length += 8;
2569
2570 if( buffer_length & 0x0001 )
2571 buffer_length += 1;
2572 }
2573
2574 /* ok now set the total number of frames passed
2575 in the high 5 bits */
2576 ppp_udp_pkt->data[0] |= (frames << 2);
2577
2578 /* set the data length */
2579 mbox->cmd.length = buffer_length;
2580 ppp_udp_pkt->cblock.length = buffer_length;
2581
2582 /* set return code */
2583 ppp_udp_pkt->cblock.result = 0;
2584 break;
2585
2586 /* PPIPE_GET_IBA_DATA */
2587 case PPIPE_GET_IBA_DATA:
2588
2589 mbox->cmd.length = 0x09;
2590
2591 sdla_peek(&card->hw, 0xF003, &ppp_udp_pkt->data,
2592 mbox->cmd.length);
2593
2594 /* set the length of the data */
2595 ppp_udp_pkt->cblock.length = 0x09;
2596
2597 /* set return code */
2598 ppp_udp_pkt->cblock.result = 0x00;
2599 ppp_udp_pkt->cblock.result = 0;
2600 break;
2601
2602 /* PPIPE_FT1_READ_STATUS */
2603 case PPIPE_FT1_READ_STATUS:
2604 sdla_peek(&card->hw, 0xF020, &ppp_udp_pkt->data[0], 2);
2605 ppp_udp_pkt->cblock.length = mbox->cmd.length = 2;
2606 ppp_udp_pkt->cblock.result = 0;
2607 break;
2608
2609 case PPIPE_FLUSH_DRIVER_STATS:
2610 init_ppp_priv_struct( ppp_priv_area );
2611 init_global_statistics( card );
2612 mbox->cmd.length = 0;
2613 ppp_udp_pkt->cblock.result = 0;
2614 break;
2615
2616
2617 case PPIPE_ROUTER_UP_TIME:
2618
2619 do_gettimeofday( &tv );
2620 ppp_priv_area->router_up_time = tv.tv_sec -
2621 ppp_priv_area->router_start_time;
2622 *(unsigned long *)&ppp_udp_pkt->data = ppp_priv_area->router_up_time;
2623 mbox->cmd.length = 4;
2624 ppp_udp_pkt->cblock.result = 0;
2625 break;
2626
2627 /* PPIPE_DRIVER_STATISTICS */
2628 case PPIPE_DRIVER_STAT_IFSEND:
2629 memcpy(&ppp_udp_pkt->data, &ppp_priv_area->if_send_stat,
2630 sizeof(if_send_stat_t));
2631
2632
2633 ppp_udp_pkt->cblock.result = 0;
2634 ppp_udp_pkt->cblock.length = sizeof(if_send_stat_t);
2635 mbox->cmd.length = sizeof(if_send_stat_t);
2636 break;
2637
2638 case PPIPE_DRIVER_STAT_INTR:
2639 memcpy(&ppp_udp_pkt->data, &card->statistics,
2640 sizeof(global_stats_t));
2641
2642 memcpy(&ppp_udp_pkt->data+sizeof(global_stats_t),
2643 &ppp_priv_area->rx_intr_stat,
2644 sizeof(rx_intr_stat_t));
2645
2646 ppp_udp_pkt->cblock.result = 0;
2647 ppp_udp_pkt->cblock.length = sizeof(global_stats_t)+
2648 sizeof(rx_intr_stat_t);
2649 mbox->cmd.length = ppp_udp_pkt->cblock.length;
2650 break;
2651
2652 case PPIPE_DRIVER_STAT_GEN:
2653 memcpy( &ppp_udp_pkt->data,
2654 &ppp_priv_area->pipe_mgmt_stat,
2655 sizeof(pipe_mgmt_stat_t));
2656
2657 memcpy(&ppp_udp_pkt->data+sizeof(pipe_mgmt_stat_t),
2658 &card->statistics, sizeof(global_stats_t));
2659
2660 ppp_udp_pkt->cblock.result = 0;
2661 ppp_udp_pkt->cblock.length = sizeof(global_stats_t)+
2662 sizeof(rx_intr_stat_t);
2663 mbox->cmd.length = ppp_udp_pkt->cblock.length;
2664 break;
2665
2666
2667 /* FT1 MONITOR STATUS */
2668 case FT1_MONITOR_STATUS_CTRL:
2669
2670 /* Enable FT1 MONITOR STATUS */
2671 if( ppp_udp_pkt->data[0] == 1) {
2672
2673 if( rCount++ != 0 ) {
2674 ppp_udp_pkt->cblock.result = 0;
2675 mbox->cmd.length = 1;
2676 break;
2677 }
2678 }
2679
2680 /* Disable FT1 MONITOR STATUS */
2681 if( ppp_udp_pkt->data[0] == 0) {
2682
2683 if( --rCount != 0) {
2684 ppp_udp_pkt->cblock.result = 0;
2685 mbox->cmd.length = 1;
2686 break;
2687 }
2688 }
2689 goto udp_dflt_cmd;
2690
2691 /* WARNING: FIXME: This should be fixed.
2692 * The FT1 Status Ctrl doesn't have a break
2693 * statment. Thus, no code must be inserted
2694 * HERE: between default and above case statement */
2695
2696 default:
2697udp_dflt_cmd:
2698
2699 /* it's a board command */
2700 mbox->cmd.command = ppp_udp_pkt->cblock.command;
2701 mbox->cmd.length = ppp_udp_pkt->cblock.length;
2702
2703 if(mbox->cmd.length) {
2704 memcpy(&mbox->data,(unsigned char *)ppp_udp_pkt->data,
2705 mbox->cmd.length);
2706 }
2707
2708 /* run the command on the board */
2709 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2710
2711 if (err != CMD_OK) {
2712
2713 ppp_error(card, err, mbox);
2714 ++ppp_priv_area->pipe_mgmt_stat.
2715 UDP_PIPE_mgmt_adptr_cmnd_timeout;
2716 break;
2717 }
2718
2719 ++ppp_priv_area->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_cmnd_OK;
2720
2721 /* copy the result back to our buffer */
2722 memcpy(&ppp_udp_pkt->cblock,mbox, sizeof(cblock_t));
2723
2724 if(mbox->cmd.length) {
2725 memcpy(&ppp_udp_pkt->data,&mbox->data,mbox->cmd.length);
2726 }
2727
2728 } /* end of switch */
2729 } /* end of else */
2730
2731 /* Fill UDP TTL */
2732 ppp_udp_pkt->ip_pkt.ttl = card->wandev.ttl;
2733 len = reply_udp(ppp_priv_area->udp_pkt_data, mbox->cmd.length);
2734
2735 if (ppp_priv_area->udp_pkt_src == UDP_PKT_FRM_NETWORK) {
2736
2737 /* Make sure we are not already sending */
2738 if (!test_bit(SEND_CRIT,&card->wandev.critical)){
2739 ++ppp_priv_area->pipe_mgmt_stat.UDP_PIPE_mgmt_passed_to_adptr;
2740 ppp_send(card,ppp_priv_area->udp_pkt_data,len,ppp_priv_area->protocol);
2741 }
2742
2743 } else {
2744
2745 /* Pass it up the stack
2746 Allocate socket buffer */
2747 if ((new_skb = dev_alloc_skb(len)) != NULL) {
2748
2749 /* copy data into new_skb */
2750
2751 buf = skb_put(new_skb, len);
2752 memcpy(buf,ppp_priv_area->udp_pkt_data, len);
2753
2754 ++ppp_priv_area->pipe_mgmt_stat.UDP_PIPE_mgmt_passed_to_stack;
2755
2756 /* Decapsulate packet and pass it up the protocol
2757 stack */
2758 new_skb->protocol = htons(ETH_P_IP);
2759 new_skb->dev = dev;
2760 new_skb->mac.raw = new_skb->data;
2761 netif_rx(new_skb);
2762 dev->last_rx = jiffies;
2763
2764 } else {
2765
2766 ++ppp_priv_area->pipe_mgmt_stat.UDP_PIPE_mgmt_no_socket;
2767 printk(KERN_INFO "no socket buffers available!\n");
2768 }
2769 }
2770
2771 ppp_priv_area->udp_pkt_lgth = 0;
2772
2773 return;
2774}
2775
2776/*=============================================================================
2777 * Initial the ppp_private_area structure.
2778 */
2779static void init_ppp_priv_struct( ppp_private_area_t *ppp_priv_area )
2780{
2781
2782 memset(&ppp_priv_area->if_send_stat, 0, sizeof(if_send_stat_t));
2783 memset(&ppp_priv_area->rx_intr_stat, 0, sizeof(rx_intr_stat_t));
2784 memset(&ppp_priv_area->pipe_mgmt_stat, 0, sizeof(pipe_mgmt_stat_t));
2785}
2786
2787/*============================================================================
2788 * Initialize Global Statistics
2789 */
2790static void init_global_statistics( sdla_t *card )
2791{
2792 memset(&card->statistics, 0, sizeof(global_stats_t));
2793}
2794
2795/*============================================================================
2796 * Initialize Receive and Transmit Buffers.
2797 */
2798static void init_ppp_tx_rx_buff( sdla_t *card )
2799{
2800 ppp508_buf_info_t* info;
2801
2802 if (card->hw.type == SDLA_S514) {
2803
2804 info = (void*)(card->hw.dpmbase + PPP514_BUF_OFFS);
2805
2806 card->u.p.txbuf_base = (void*)(card->hw.dpmbase +
2807 info->txb_ptr);
2808
2809 card->u.p.txbuf_last = (ppp_buf_ctl_t*)card->u.p.txbuf_base +
2810 (info->txb_num - 1);
2811
2812 card->u.p.rxbuf_base = (void*)(card->hw.dpmbase +
2813 info->rxb_ptr);
2814
2815 card->u.p.rxbuf_last = (ppp_buf_ctl_t*)card->u.p.rxbuf_base +
2816 (info->rxb_num - 1);
2817
2818 } else {
2819
2820 info = (void*)(card->hw.dpmbase + PPP508_BUF_OFFS);
2821
2822 card->u.p.txbuf_base = (void*)(card->hw.dpmbase +
2823 (info->txb_ptr - PPP508_MB_VECT));
2824
2825 card->u.p.txbuf_last = (ppp_buf_ctl_t*)card->u.p.txbuf_base +
2826 (info->txb_num - 1);
2827
2828 card->u.p.rxbuf_base = (void*)(card->hw.dpmbase +
2829 (info->rxb_ptr - PPP508_MB_VECT));
2830
2831 card->u.p.rxbuf_last = (ppp_buf_ctl_t*)card->u.p.rxbuf_base +
2832 (info->rxb_num - 1);
2833 }
2834
2835 card->u.p.txbuf_next = (unsigned long*)&info->txb_nxt;
2836 card->u.p.rxbuf_next = (unsigned long*)&info->rxb1_ptr;
2837
2838 card->u.p.rx_base = info->rxb_base;
2839 card->u.p.rx_top = info->rxb_end;
2840
2841 card->u.p.txbuf = card->u.p.txbuf_base;
2842 card->rxmb = card->u.p.rxbuf_base;
2843
2844}
2845
2846/*=============================================================================
2847 * Read Connection Information (ie for Remote IP address assginment).
2848 * Called when ppp interface connected.
2849 */
2850static int read_info( sdla_t *card )
2851{
2852 struct net_device *dev = card->wandev.dev;
2853 ppp_private_area_t *ppp_priv_area = dev->priv;
2854 int err;
2855
2856 struct ifreq if_info;
2857 struct sockaddr_in *if_data1, *if_data2;
2858 mm_segment_t fs;
2859
2860 /* Set Local and remote addresses */
2861 memset(&if_info, 0, sizeof(if_info));
2862 strcpy(if_info.ifr_name, dev->name);
2863
2864
2865 fs = get_fs();
2866 set_fs(get_ds()); /* get user space block */
2867
2868 /* Change the local and remote ip address of the interface.
2869 * This will also add in the destination route.
2870 */
2871 if_data1 = (struct sockaddr_in *)&if_info.ifr_addr;
2872 if_data1->sin_addr.s_addr = ppp_priv_area->ip_local;
2873 if_data1->sin_family = AF_INET;
2874 err = devinet_ioctl( SIOCSIFADDR, &if_info );
2875 if_data2 = (struct sockaddr_in *)&if_info.ifr_dstaddr;
2876 if_data2->sin_addr.s_addr = ppp_priv_area->ip_remote;
2877 if_data2->sin_family = AF_INET;
2878 err = devinet_ioctl( SIOCSIFDSTADDR, &if_info );
2879
2880 set_fs(fs); /* restore old block */
2881
2882 if (err) {
2883 printk (KERN_INFO "%s: Adding of route failed: %i\n",
2884 card->devname,err);
2885 printk (KERN_INFO "%s: Local : %u.%u.%u.%u\n",
2886 card->devname,NIPQUAD(ppp_priv_area->ip_local));
2887 printk (KERN_INFO "%s: Remote: %u.%u.%u.%u\n",
2888 card->devname,NIPQUAD(ppp_priv_area->ip_remote));
2889 }
2890 return err;
2891}
2892
2893/*=============================================================================
2894 * Remove Dynamic Route.
2895 * Called when ppp interface disconnected.
2896 */
2897
2898static void remove_route( sdla_t *card )
2899{
2900
2901 struct net_device *dev = card->wandev.dev;
2902 long ip_addr;
2903 int err;
2904
2905 mm_segment_t fs;
2906 struct ifreq if_info;
2907 struct sockaddr_in *if_data1;
2908 struct in_device *in_dev = dev->ip_ptr;
2909 struct in_ifaddr *ifa = in_dev->ifa_list;
2910
2911 ip_addr = ifa->ifa_local;
2912
2913 /* Set Local and remote addresses */
2914 memset(&if_info, 0, sizeof(if_info));
2915 strcpy(if_info.ifr_name, dev->name);
2916
2917 fs = get_fs();
2918 set_fs(get_ds()); /* get user space block */
2919
2920 /* Change the local ip address of the interface to 0.
2921 * This will also delete the destination route.
2922 */
2923 if_data1 = (struct sockaddr_in *)&if_info.ifr_addr;
2924 if_data1->sin_addr.s_addr = 0;
2925 if_data1->sin_family = AF_INET;
2926 err = devinet_ioctl( SIOCSIFADDR, &if_info );
2927
2928 set_fs(fs); /* restore old block */
2929
2930
2931 if (err) {
2932 printk (KERN_INFO "%s: Deleting dynamic route failed %d!\n",
2933 card->devname, err);
2934 return;
2935 }else{
2936 printk (KERN_INFO "%s: PPP Deleting dynamic route %u.%u.%u.%u successfuly\n",
2937 card->devname, NIPQUAD(ip_addr));
2938 }
2939 return;
2940}
2941
2942/*=============================================================================
2943 * Perform the Interrupt Test by running the READ_CODE_VERSION command MAX_INTR
2944 * _TEST_COUNTER times.
2945 */
2946static int intr_test( sdla_t *card )
2947{
2948 ppp_mbox_t *mb = card->mbox;
2949 int err,i;
2950
2951 err = ppp_set_intr_mode( card, 0x08 );
2952
2953 if (err == CMD_OK) {
2954
2955 for (i = 0; i < MAX_INTR_TEST_COUNTER; i ++) {
2956 /* Run command READ_CODE_VERSION */
2957 memset(&mb->cmd, 0, sizeof(ppp_cmd_t));
2958 mb->cmd.length = 0;
2959 mb->cmd.command = PPP_READ_CODE_VERSION;
2960 err = sdla_exec(mb) ? mb->cmd.result : CMD_TIMEOUT;
2961 if (err != CMD_OK)
2962 ppp_error(card, err, mb);
2963 }
2964 }
2965 else return err;
2966
2967 err = ppp_set_intr_mode( card, 0 );
2968 if (err != CMD_OK)
2969 return err;
2970
2971 return 0;
2972}
2973
2974/*==============================================================================
2975 * Determine what type of UDP call it is. DRVSTATS or PTPIPEAB ?
2976 */
2977static int udp_pkt_type( struct sk_buff *skb, sdla_t *card )
2978{
2979 unsigned char *sendpacket;
2980 unsigned char buf2[5];
2981 ppp_udp_pkt_t *ppp_udp_pkt = (ppp_udp_pkt_t *)skb->data;
2982
2983 sendpacket = skb->data;
2984 memcpy(&buf2, &card->wandev.udp_port, 2);
2985
2986 if( ppp_udp_pkt->ip_pkt.ver_inet_hdr_length == 0x45 && /* IP packet */
2987 sendpacket[9] == 0x11 && /* UDP packet */
2988 sendpacket[22] == buf2[1] && /* UDP Port */
2989 sendpacket[23] == buf2[0] &&
2990 sendpacket[36] == 0x01 ) {
2991
2992 if ( sendpacket[28] == 0x50 && /* PTPIPEAB: Signature */
2993 sendpacket[29] == 0x54 &&
2994 sendpacket[30] == 0x50 &&
2995 sendpacket[31] == 0x49 &&
2996 sendpacket[32] == 0x50 &&
2997 sendpacket[33] == 0x45 &&
2998 sendpacket[34] == 0x41 &&
2999 sendpacket[35] == 0x42 ){
3000
3001 return UDP_PTPIPE_TYPE;
3002
3003 } else if(sendpacket[28] == 0x44 && /* DRVSTATS: Signature */
3004 sendpacket[29] == 0x52 &&
3005 sendpacket[30] == 0x56 &&
3006 sendpacket[31] == 0x53 &&
3007 sendpacket[32] == 0x54 &&
3008 sendpacket[33] == 0x41 &&
3009 sendpacket[34] == 0x54 &&
3010 sendpacket[35] == 0x53 ){
3011
3012 return UDP_DRVSTATS_TYPE;
3013
3014 } else
3015 return UDP_INVALID_TYPE;
3016
3017 } else
3018 return UDP_INVALID_TYPE;
3019
3020}
3021
3022/*============================================================================
3023 * Check to see if the packet to be transmitted contains a broadcast or
3024 * multicast source IP address.
3025 */
3026
3027static int chk_bcast_mcast_addr(sdla_t *card, struct net_device* dev,
3028 struct sk_buff *skb)
3029{
3030 u32 src_ip_addr;
3031 u32 broadcast_ip_addr = 0;
3032 struct in_device *in_dev;
3033
3034 /* read the IP source address from the outgoing packet */
3035 src_ip_addr = *(u32 *)(skb->data + 12);
3036
3037 /* read the IP broadcast address for the device */
3038 in_dev = dev->ip_ptr;
3039 if(in_dev != NULL) {
3040 struct in_ifaddr *ifa= in_dev->ifa_list;
3041 if(ifa != NULL)
3042 broadcast_ip_addr = ifa->ifa_broadcast;
3043 else
3044 return 0;
3045 }
3046
3047 /* check if the IP Source Address is a Broadcast address */
3048 if((dev->flags & IFF_BROADCAST) && (src_ip_addr == broadcast_ip_addr)) {
3049 printk(KERN_INFO "%s: Broadcast Source Address silently discarded\n",
3050 card->devname);
3051 return 1;
3052 }
3053
3054 /* check if the IP Source Address is a Multicast address */
3055 if((ntohl(src_ip_addr) >= 0xE0000001) &&
3056 (ntohl(src_ip_addr) <= 0xFFFFFFFE)) {
3057 printk(KERN_INFO "%s: Multicast Source Address silently discarded\n",
3058 card->devname);
3059 return 1;
3060 }
3061
3062 return 0;
3063}
3064
3065void s508_lock (sdla_t *card, unsigned long *smp_flags)
3066{
3067 spin_lock_irqsave(&card->wandev.lock, *smp_flags);
3068}
3069
3070void s508_unlock (sdla_t *card, unsigned long *smp_flags)
3071{
3072 spin_unlock_irqrestore(&card->wandev.lock, *smp_flags);
3073}
3074
3075static int read_connection_info (sdla_t *card)
3076{
3077 ppp_mbox_t *mb = card->mbox;
3078 struct net_device *dev = card->wandev.dev;
3079 ppp_private_area_t *ppp_priv_area = dev->priv;
3080 ppp508_connect_info_t *ppp508_connect_info;
3081 int err;
3082
3083 memset(&mb->cmd, 0, sizeof(ppp_cmd_t));
3084 mb->cmd.length = 0;
3085 mb->cmd.command = PPP_GET_CONNECTION_INFO;
3086 err = sdla_exec(mb) ? mb->cmd.result : CMD_TIMEOUT;
3087
3088 if (err != CMD_OK) {
3089 ppp_error(card, err, mb);
3090 ppp_priv_area->ip_remote = 0;
3091 ppp_priv_area->ip_local = 0;
3092 }
3093 else {
3094 ppp508_connect_info = (ppp508_connect_info_t *)mb->data;
3095 ppp_priv_area->ip_remote = ppp508_connect_info->ip_remote;
3096 ppp_priv_area->ip_local = ppp508_connect_info->ip_local;
3097
3098 NEX_PRINTK(KERN_INFO "READ CONNECTION GOT IP ADDRESS %x, %x\n",
3099 ppp_priv_area->ip_remote,
3100 ppp_priv_area->ip_local);
3101 }
3102
3103 return err;
3104}
3105
3106/*===============================================================================
3107 * config_ppp
3108 *
3109 * Configure the ppp protocol and enable communications.
3110 *
3111 * The if_open function binds this function to the poll routine.
3112 * Therefore, this function will run every time the ppp interface
3113 * is brought up.
3114 *
3115 * If the communications are not enabled, proceed to configure
3116 * the card and enable communications.
3117 *
3118 * If the communications are enabled, it means that the interface
3119 * was shutdown by ether the user or driver. In this case, we
3120 * have to check that the IP addresses have not changed. If
3121 * the IP addresses changed, we have to reconfigure the firmware
3122 * and update the changed IP addresses. Otherwise, just exit.
3123 */
3124static int config_ppp (sdla_t *card)
3125{
3126
3127 struct net_device *dev = card->wandev.dev;
3128 ppp_flags_t *flags = card->flags;
3129 ppp_private_area_t *ppp_priv_area = dev->priv;
3130
3131 if (card->u.p.comm_enabled){
3132
3133 if (ppp_priv_area->ip_local_tmp != ppp_priv_area->ip_local ||
3134 ppp_priv_area->ip_remote_tmp != ppp_priv_area->ip_remote){
3135
3136 /* The IP addersses have changed, we must
3137 * stop the communications and reconfigure
3138 * the card. Reason: the firmware must know
3139 * the local and remote IP addresses. */
3140 disable_comm(card);
3141 wanpipe_set_state(card, WAN_DISCONNECTED);
3142 printk(KERN_INFO
3143 "%s: IP addresses changed!\n",
3144 card->devname);
3145 printk(KERN_INFO "%s: Restarting communications ...\n",
3146 card->devname);
3147 }else{
3148 /* IP addresses are the same and the link is up,
3149 * we don't have to do anything here. Therefore, exit */
3150 return 0;
3151 }
3152 }
3153
3154 /* Record the new IP addreses */
3155 ppp_priv_area->ip_local = ppp_priv_area->ip_local_tmp;
3156 ppp_priv_area->ip_remote = ppp_priv_area->ip_remote_tmp;
3157
3158 if (config508(dev, card)){
3159 printk(KERN_INFO "%s: Failed to configure PPP device\n",
3160 card->devname);
3161 return 0;
3162 }
3163
3164 if (ppp_set_intr_mode(card, PPP_INTR_RXRDY|
3165 PPP_INTR_TXRDY|
3166 PPP_INTR_MODEM|
3167 PPP_INTR_DISC |
3168 PPP_INTR_OPEN |
3169 PPP_INTR_DROP_DTR |
3170 PPP_INTR_TIMER)) {
3171
3172 printk(KERN_INFO "%s: Failed to configure board interrupts !\n",
3173 card->devname);
3174 return 0;
3175 }
3176
3177 /* Turn off the transmit and timer interrupt */
3178 flags->imask &= ~(PPP_INTR_TXRDY | PPP_INTR_TIMER) ;
3179
3180
3181 /* If you are not the authenticator and any one of the protocol is
3182 * enabled then we call the set_out_bound_authentication.
3183 */
3184 if ( !card->u.p.authenticator && (ppp_priv_area->pap || ppp_priv_area->chap)) {
3185 if ( ppp_set_outbnd_auth(card, ppp_priv_area) ){
3186 printk(KERN_INFO "%s: Outbound authentication failed !\n",
3187 card->devname);
3188 return 0;
3189 }
3190 }
3191
3192 /* If you are the authenticator and any one of the protocol is enabled
3193 * then we call the set_in_bound_authentication.
3194 */
3195 if (card->u.p.authenticator && (ppp_priv_area->pap || ppp_priv_area->chap)){
3196 if (ppp_set_inbnd_auth(card, ppp_priv_area)){
3197 printk(KERN_INFO "%s: Inbound authentication failed !\n",
3198 card->devname);
3199 return 0;
3200 }
3201 }
3202
3203 /* If we fail to enable communications here it's OK,
3204 * since the DTR timer will cause a disconnected, which
3205 * will retrigger communication in timer_intr() */
3206 if (ppp_comm_enable(card) == CMD_OK) {
3207 wanpipe_set_state(card, WAN_CONNECTING);
3208 init_ppp_tx_rx_buff(card);
3209 }
3210
3211 return 0;
3212}
3213
3214/*============================================================
3215 * ppp_poll
3216 *
3217 * Rationale:
3218 * We cannot manipulate the routing tables, or
3219 * ip addresses withing the interrupt. Therefore
3220 * we must perform such actons outside an interrupt
3221 * at a later time.
3222 *
3223 * Description:
3224 * PPP polling routine, responsible for
3225 * shutting down interfaces upon disconnect
3226 * and adding/removing routes.
3227 *
3228 * Usage:
3229 * This function is executed for each ppp
3230 * interface through a tq_schedule bottom half.
3231 *
3232 * trigger_ppp_poll() function is used to kick
3233 * the ppp_poll routine.
3234 */
3235static void ppp_poll(struct net_device *dev)
3236{
3237 ppp_private_area_t *ppp_priv_area;
3238 sdla_t *card;
3239 u8 check_gateway=0;
3240 ppp_flags_t *flags;
3241
3242 if (!dev || (ppp_priv_area = dev->priv) == NULL)
3243 return;
3244
3245 card = ppp_priv_area->card;
3246 flags = card->flags;
3247
3248 /* Shutdown is in progress, stop what you are
3249 * doing and get out */
3250 if (test_bit(PERI_CRIT,&card->wandev.critical)){
3251 clear_bit(POLL_CRIT,&card->wandev.critical);
3252 return;
3253 }
3254
3255 /* if_open() function has triggered the polling routine
3256 * to determine the configured IP addresses. Once the
3257 * addresses are found, trigger the chdlc configuration */
3258 if (test_bit(0,&ppp_priv_area->config_ppp)){
3259
3260 ppp_priv_area->ip_local_tmp = get_ip_address(dev,WAN_LOCAL_IP);
3261 ppp_priv_area->ip_remote_tmp = get_ip_address(dev,WAN_POINTOPOINT_IP);
3262
3263 if (ppp_priv_area->ip_local_tmp == ppp_priv_area->ip_remote_tmp &&
3264 card->u.p.ip_mode == WANOPT_PPP_HOST){
3265
3266 if (++ppp_priv_area->ip_error > MAX_IP_ERRORS){
3267 printk(KERN_INFO "\n%s: --- WARNING ---\n",
3268 card->devname);
3269 printk(KERN_INFO "%s: The local IP address is the same as the\n",
3270 card->devname);
3271 printk(KERN_INFO "%s: Point-to-Point IP address.\n",
3272 card->devname);
3273 printk(KERN_INFO "%s: --- WARNING ---\n\n",
3274 card->devname);
3275 }else{
3276 clear_bit(POLL_CRIT,&card->wandev.critical);
3277 ppp_priv_area->poll_delay_timer.expires = jiffies+HZ;
3278 add_timer(&ppp_priv_area->poll_delay_timer);
3279 return;
3280 }
3281 }
3282
3283 ppp_priv_area->timer_int_enabled |= TMR_INT_ENABLED_CONFIG;
3284 flags->imask |= PPP_INTR_TIMER;
3285 ppp_priv_area->ip_error=0;
3286
3287 clear_bit(0,&ppp_priv_area->config_ppp);
3288 clear_bit(POLL_CRIT,&card->wandev.critical);
3289 return;
3290 }
3291
3292 /* Dynamic interface implementation, as well as dynamic
3293 * routing. */
3294
3295 switch (card->wandev.state) {
3296
3297 case WAN_DISCONNECTED:
3298
3299 /* If the dynamic interface configuration is on, and interface
3300 * is up, then bring down the netowrk interface */
3301
3302 if (test_bit(DYN_OPT_ON,&ppp_priv_area->interface_down) &&
3303 !test_bit(DEV_DOWN,&ppp_priv_area->interface_down) &&
3304 card->wandev.dev->flags & IFF_UP){
3305
3306 printk(KERN_INFO "%s: Interface %s down.\n",
3307 card->devname,card->wandev.dev->name);
3308 change_dev_flags(card->wandev.dev,
3309 (card->wandev.dev->flags&~IFF_UP));
3310 set_bit(DEV_DOWN,&ppp_priv_area->interface_down);
3311 }else{
3312 /* We need to check if the local IP address is
3313 * zero. If it is, we shouldn't try to remove it.
3314 * For some reason the kernel crashes badly if
3315 * we try to remove the route twice */
3316
3317 if (card->wandev.dev->flags & IFF_UP &&
3318 get_ip_address(card->wandev.dev,WAN_LOCAL_IP) &&
3319 card->u.p.ip_mode == WANOPT_PPP_PEER){
3320
3321 remove_route(card);
3322 }
3323 }
3324 break;
3325
3326 case WAN_CONNECTED:
3327
3328 /* In SMP machine this code can execute before the interface
3329 * comes up. In this case, we must make sure that we do not
3330 * try to bring up the interface before dev_open() is finished */
3331
3332
3333 /* DEV_DOWN will be set only when we bring down the interface
3334 * for the very first time. This way we know that it was us
3335 * that brought the interface down */
3336
3337 if (test_bit(DYN_OPT_ON,&ppp_priv_area->interface_down) &&
3338 test_bit(DEV_DOWN, &ppp_priv_area->interface_down) &&
3339 !(card->wandev.dev->flags & IFF_UP)){
3340
3341 printk(KERN_INFO "%s: Interface %s up.\n",
3342 card->devname,card->wandev.dev->name);
3343
3344 change_dev_flags(card->wandev.dev,(card->wandev.dev->flags|IFF_UP));
3345 clear_bit(DEV_DOWN,&ppp_priv_area->interface_down);
3346 check_gateway=1;
3347 }
3348
3349 if ((card->u.p.ip_mode == WANOPT_PPP_PEER) &&
3350 test_bit(1,&Read_connection_info)) {
3351
3352 process_route(card);
3353 clear_bit(1,&Read_connection_info);
3354 check_gateway=1;
3355 }
3356
3357 if (ppp_priv_area->gateway && check_gateway)
3358 add_gateway(card,dev);
3359
3360 break;
3361 }
3362 clear_bit(POLL_CRIT,&card->wandev.critical);
3363 return;
3364}
3365
3366/*============================================================
3367 * trigger_ppp_poll
3368 *
3369 * Description:
3370 * Add a ppp_poll() task into a tq_scheduler bh handler
3371 * for a specific interface. This will kick
3372 * the ppp_poll() routine at a later time.
3373 *
3374 * Usage:
3375 * Interrupts use this to defer a taks to
3376 * a polling routine.
3377 *
3378 */
3379
3380static void trigger_ppp_poll(struct net_device *dev)
3381{
3382 ppp_private_area_t *ppp_priv_area;
3383 if ((ppp_priv_area=dev->priv) != NULL){
3384
3385 sdla_t *card = ppp_priv_area->card;
3386
3387 if (test_bit(PERI_CRIT,&card->wandev.critical)){
3388 return;
3389 }
3390
3391 if (test_and_set_bit(POLL_CRIT,&card->wandev.critical)){
3392 return;
3393 }
3394
3395 schedule_work(&ppp_priv_area->poll_work);
3396 }
3397 return;
3398}
3399
3400static void ppp_poll_delay (unsigned long dev_ptr)
3401{
3402 struct net_device *dev = (struct net_device *)dev_ptr;
3403 trigger_ppp_poll(dev);
3404}
3405
3406/*============================================================
3407 * detect_and_fix_tx_bug
3408 *
3409 * Description:
3410 * On connect, if the board tx buffer ptr is not the same
3411 * as the driver tx buffer ptr, we found a firmware bug.
3412 * Report the bug to the above layer. To fix the
3413 * error restart communications again.
3414 *
3415 * Usage:
3416 *
3417 */
3418
3419static int detect_and_fix_tx_bug (sdla_t *card)
3420{
3421 if (((unsigned long)card->u.p.txbuf_base&0xFFF) != ((*card->u.p.txbuf_next)&0xFFF)){
3422 NEX_PRINTK(KERN_INFO "Major Error, Fix the bug\n");
3423 return 1;
3424 }
3425 return 0;
3426}
3427
3428MODULE_LICENSE("GPL");
3429
3430/****** End *****************************************************************/
diff --git a/drivers/net/wan/sdla_x25.c b/drivers/net/wan/sdla_x25.c
deleted file mode 100644
index 63f846d6f3a6..000000000000
--- a/drivers/net/wan/sdla_x25.c
+++ /dev/null
@@ -1,5497 +0,0 @@
1/*****************************************************************************
2* sdla_x25.c WANPIPE(tm) Multiprotocol WAN Link Driver. X.25 module.
3*
4* Author: Nenad Corbic <ncorbic@sangoma.com>
5*
6* Copyright: (c) 1995-2001 Sangoma Technologies Inc.
7*
8* This program is free software; you can redistribute it and/or
9* modify it under the terms of the GNU General Public License
10* as published by the Free Software Foundation; either version
11* 2 of the License, or (at your option) any later version.
12* ============================================================================
13* Apr 03, 2001 Nenad Corbic o Fixed the rx_skb=NULL bug in x25 in rx_intr().
14* Dec 26, 2000 Nenad Corbic o Added a new polling routine, that uses
15* a kernel timer (more efficient).
16* Dec 25, 2000 Nenad Corbic o Updated for 2.4.X kernel
17* Jul 26, 2000 Nenad Corbic o Increased the local packet buffering
18* for API to 4096+header_size.
19* Jul 17, 2000 Nenad Corbic o Fixed the x25 startup bug. Enable
20* communications only after all interfaces
21* come up. HIGH SVC/PVC is used to calculate
22* the number of channels.
23* Enable protocol only after all interfaces
24* are enabled.
25* Jul 10, 2000 Nenad Corbic o Fixed the M_BIT bug.
26* Apr 25, 2000 Nenad Corbic o Pass Modem messages to the API.
27* Disable idle timeout in X25 API.
28* Apr 14, 2000 Nenad Corbic o Fixed: Large LCN number support.
29* Maximum LCN number is 4095.
30* Maximum number of X25 channels is 255.
31* Apr 06, 2000 Nenad Corbic o Added SMP Support.
32* Mar 29, 2000 Nenad Corbic o Added support for S514 PCI Card
33* Mar 23, 2000 Nenad Corbic o Improved task queue, BH handling.
34* Mar 14, 2000 Nenad Corbic o Updated Protocol Violation handling
35* routines. Bug Fix.
36* Mar 10, 2000 Nenad Corbic o Bug Fix: corrupted mbox recovery.
37* Mar 09, 2000 Nenad Corbic o Fixed the auto HDLC bug.
38* Mar 08, 2000 Nenad Corbic o Fixed LAPB HDLC startup problems.
39* Application must bring the link up
40* before tx/rx, and bring the
41* link down on close().
42* Mar 06, 2000 Nenad Corbic o Added an option for logging call setup
43* information.
44* Feb 29, 2000 Nenad Corbic o Added support for LAPB HDLC API
45* Feb 25, 2000 Nenad Corbic o Fixed the modem failure handling.
46* No Modem OOB message will be passed
47* to the user.
48* Feb 21, 2000 Nenad Corbic o Added Xpipemon Debug Support
49* Dec 30, 1999 Nenad Corbic o Socket based X25API
50* Sep 17, 1998 Jaspreet Singh o Updates for 2.2.X kernel
51* Mar 15, 1998 Alan Cox o 2.1.x porting
52* Dec 19, 1997 Jaspreet Singh o Added multi-channel IPX support
53* Nov 27, 1997 Jaspreet Singh o Added protection against enabling of irqs
54* when they are disabled.
55* Nov 17, 1997 Farhan Thawar o Added IPX support
56* o Changed if_send() to now buffer packets when
57* the board is busy
58* o Removed queueing of packets via the polling
59* routing
60* o Changed if_send() critical flags to properly
61* handle race conditions
62* Nov 06, 1997 Farhan Thawar o Added support for SVC timeouts
63* o Changed PVC encapsulation to ETH_P_IP
64* Jul 21, 1997 Jaspreet Singh o Fixed freeing up of buffers using kfree()
65* when packets are received.
66* Mar 11, 1997 Farhan Thawar Version 3.1.1
67* o added support for V35
68* o changed if_send() to return 0 if
69* wandev.critical() is true
70* o free socket buffer in if_send() if
71* returning 0
72* o added support for single '@' address to
73* accept all incoming calls
74* o fixed bug in set_chan_state() to disconnect
75* Jan 15, 1997 Gene Kozin Version 3.1.0
76* o implemented exec() entry point
77* Jan 07, 1997 Gene Kozin Initial version.
78*****************************************************************************/
79
80/*======================================================
81 * Includes
82 *=====================================================*/
83
84#include <linux/module.h>
85#include <linux/kernel.h> /* printk(), and other useful stuff */
86#include <linux/stddef.h> /* offsetof(), etc. */
87#include <linux/errno.h> /* return codes */
88#include <linux/string.h> /* inline memset(), etc. */
89#include <linux/ctype.h>
90#include <linux/slab.h> /* kmalloc(), kfree() */
91#include <linux/wanrouter.h> /* WAN router definitions */
92#include <linux/wanpipe.h> /* WANPIPE common user API definitions */
93#include <linux/workqueue.h>
94#include <linux/jiffies.h> /* time_after() macro */
95#include <asm/byteorder.h> /* htons(), etc. */
96#include <asm/atomic.h>
97#include <linux/delay.h> /* Experimental delay */
98
99#include <asm/uaccess.h>
100
101#include <linux/if.h>
102#include <linux/if_arp.h>
103#include <linux/sdla_x25.h> /* X.25 firmware API definitions */
104#include <linux/if_wanpipe_common.h>
105#include <linux/if_wanpipe.h>
106
107
108/*======================================================
109 * Defines & Macros
110 *=====================================================*/
111
112
113#define CMD_OK 0 /* normal firmware return code */
114#define CMD_TIMEOUT 0xFF /* firmware command timed out */
115#define MAX_CMD_RETRY 10 /* max number of firmware retries */
116
117#define X25_CHAN_MTU 4096 /* unfragmented logical channel MTU */
118#define X25_HRDHDR_SZ 7 /* max encapsulation header size */
119#define X25_CONCT_TMOUT (90*HZ) /* link connection timeout */
120#define X25_RECON_TMOUT (10*HZ) /* link connection timeout */
121#define CONNECT_TIMEOUT (90*HZ) /* link connection timeout */
122#define HOLD_DOWN_TIME (30*HZ) /* link hold down time */
123#define MAX_BH_BUFF 10
124#define M_BIT 0x01
125
126//#define PRINT_DEBUG 1
127#ifdef PRINT_DEBUG
128#define DBG_PRINTK(format, a...) printk(format, ## a)
129#else
130#define DBG_PRINTK(format, a...)
131#endif
132
133#define TMR_INT_ENABLED_POLL_ACTIVE 0x01
134#define TMR_INT_ENABLED_POLL_CONNECT_ON 0x02
135#define TMR_INT_ENABLED_POLL_CONNECT_OFF 0x04
136#define TMR_INT_ENABLED_POLL_DISCONNECT 0x08
137#define TMR_INT_ENABLED_CMD_EXEC 0x10
138#define TMR_INT_ENABLED_UPDATE 0x20
139#define TMR_INT_ENABLED_UDP_PKT 0x40
140
141#define MAX_X25_ADDR_SIZE 16
142#define MAX_X25_DATA_SIZE 129
143#define MAX_X25_FACL_SIZE 110
144
145#define TRY_CMD_AGAIN 2
146#define DELAY_RESULT 1
147#define RETURN_RESULT 0
148
149#define DCD(x) (x & 0x03 ? "HIGH" : "LOW")
150#define CTS(x) (x & 0x05 ? "HIGH" : "LOW")
151
152
153/* Driver will not write log messages about
154 * modem status if defined.*/
155#define MODEM_NOT_LOG 1
156
157/*====================================================
158 * For IPXWAN
159 *===================================================*/
160
161#define CVHexToAscii(b) (((unsigned char)(b) > (unsigned char)9) ? ((unsigned char)'A' + ((unsigned char)(b) - (unsigned char)10)) : ((unsigned char)'0' + (unsigned char)(b)))
162
163
164/*====================================================
165 * MEMORY DEBUGGING FUNCTION
166 *====================================================
167
168#define KMEM_SAFETYZONE 8
169
170static void * dbg_kmalloc(unsigned int size, int prio, int line) {
171 int i = 0;
172 void * v = kmalloc(size+sizeof(unsigned int)+2*KMEM_SAFETYZONE*8,prio);
173 char * c1 = v;
174 c1 += sizeof(unsigned int);
175 *((unsigned int *)v) = size;
176
177 for (i = 0; i < KMEM_SAFETYZONE; i++) {
178 c1[0] = 'D'; c1[1] = 'E'; c1[2] = 'A'; c1[3] = 'D';
179 c1[4] = 'B'; c1[5] = 'E'; c1[6] = 'E'; c1[7] = 'F';
180 c1 += 8;
181 }
182 c1 += size;
183 for (i = 0; i < KMEM_SAFETYZONE; i++) {
184 c1[0] = 'M'; c1[1] = 'U'; c1[2] = 'N'; c1[3] = 'G';
185 c1[4] = 'W'; c1[5] = 'A'; c1[6] = 'L'; c1[7] = 'L';
186 c1 += 8;
187 }
188 v = ((char *)v) + sizeof(unsigned int) + KMEM_SAFETYZONE*8;
189 printk(KERN_INFO "line %d kmalloc(%d,%d) = %p\n",line,size,prio,v);
190 return v;
191}
192static void dbg_kfree(void * v, int line) {
193 unsigned int * sp = (unsigned int *)(((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8));
194 unsigned int size = *sp;
195 char * c1 = ((char *)v) - KMEM_SAFETYZONE*8;
196 int i = 0;
197 for (i = 0; i < KMEM_SAFETYZONE; i++) {
198 if ( c1[0] != 'D' || c1[1] != 'E' || c1[2] != 'A' || c1[3] != 'D'
199 || c1[4] != 'B' || c1[5] != 'E' || c1[6] != 'E' || c1[7] != 'F') {
200 printk(KERN_INFO "kmalloced block at %p has been corrupted (underrun)!\n",v);
201 printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8,
202 c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] );
203 }
204 c1 += 8;
205 }
206 c1 += size;
207 for (i = 0; i < KMEM_SAFETYZONE; i++) {
208 if ( c1[0] != 'M' || c1[1] != 'U' || c1[2] != 'N' || c1[3] != 'G'
209 || c1[4] != 'W' || c1[5] != 'A' || c1[6] != 'L' || c1[7] != 'L'
210 ) {
211 printk(KERN_INFO "kmalloced block at %p has been corrupted (overrun):\n",v);
212 printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8,
213 c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] );
214 }
215 c1 += 8;
216 }
217 printk(KERN_INFO "line %d kfree(%p)\n",line,v);
218 v = ((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8);
219 kfree(v);
220}
221
222#define kmalloc(x,y) dbg_kmalloc(x,y,__LINE__)
223#define kfree(x) dbg_kfree(x,__LINE__)
224
225==============================================================*/
226
227
228
229/*===============================================
230 * Data Structures
231 *===============================================*/
232
233
234/*========================================================
235 * Name: x25_channel
236 *
237 * Purpose: To hold private informaton for each
238 * logical channel.
239 *
240 * Rationale: Per-channel debugging is possible if each
241 * channel has its own private area.
242 *
243 * Assumptions:
244 *
245 * Description: This is an extention of the struct net_device
246 * we create for each network interface to keep
247 * the rest of X.25 channel-specific data.
248 *
249 * Construct: Typedef
250 */
251typedef struct x25_channel
252{
253 wanpipe_common_t common; /* common area for x25api and socket */
254 char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */
255 char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */
256 unsigned tx_pkt_size;
257 unsigned short protocol; /* ethertype, 0 - multiplexed */
258 char drop_sequence; /* mark sequence for dropping */
259 unsigned long state_tick; /* time of the last state change */
260 unsigned idle_timeout; /* sec, before disconnecting */
261 unsigned long i_timeout_sofar; /* # of sec's we've been idle */
262 unsigned hold_timeout; /* sec, before re-connecting */
263 unsigned long tick_counter; /* counter for transmit time out */
264 char devtint; /* Weather we should dev_tint() */
265 struct sk_buff* rx_skb; /* receive socket buffer */
266 struct sk_buff* tx_skb; /* transmit socket buffer */
267
268 bh_data_t *bh_head; /* Circular buffer for x25api_bh */
269 unsigned long tq_working;
270 volatile int bh_write;
271 volatile int bh_read;
272 atomic_t bh_buff_used;
273
274 sdla_t* card; /* -> owner */
275 struct net_device *dev; /* -> bound devce */
276
277 int ch_idx;
278 unsigned char enable_IPX;
279 unsigned long network_number;
280 struct net_device_stats ifstats; /* interface statistics */
281 unsigned short transmit_length;
282 unsigned short tx_offset;
283 char transmit_buffer[X25_CHAN_MTU+sizeof(x25api_hdr_t)];
284
285 if_send_stat_t if_send_stat;
286 rx_intr_stat_t rx_intr_stat;
287 pipe_mgmt_stat_t pipe_mgmt_stat;
288
289 unsigned long router_start_time; /* Router start time in seconds */
290 unsigned long router_up_time;
291
292} x25_channel_t;
293
294/* FIXME Take this out */
295
296#ifdef NEX_OLD_CALL_INFO
297typedef struct x25_call_info
298{
299 char dest[17]; PACKED;/* ASCIIZ destination address */
300 char src[17]; PACKED;/* ASCIIZ source address */
301 char nuser; PACKED;/* number of user data bytes */
302 unsigned char user[127]; PACKED;/* user data */
303 char nfacil; PACKED;/* number of facilities */
304 struct
305 {
306 unsigned char code; PACKED;
307 unsigned char parm; PACKED;
308 } facil[64]; /* facilities */
309} x25_call_info_t;
310#else
311typedef struct x25_call_info
312{
313 char dest[MAX_X25_ADDR_SIZE] PACKED;/* ASCIIZ destination address */
314 char src[MAX_X25_ADDR_SIZE] PACKED;/* ASCIIZ source address */
315 unsigned char nuser PACKED;
316 unsigned char user[MAX_X25_DATA_SIZE] PACKED;/* user data */
317 unsigned char nfacil PACKED;
318 unsigned char facil[MAX_X25_FACL_SIZE] PACKED;
319 unsigned short lcn PACKED;
320} x25_call_info_t;
321#endif
322
323
324
325/*===============================================
326 * Private Function Prototypes
327 *==============================================*/
328
329
330/*=================================================
331 * WAN link driver entry points. These are
332 * called by the WAN router module.
333 */
334static int update(struct wan_device* wandev);
335static int new_if(struct wan_device* wandev, struct net_device* dev,
336 wanif_conf_t* conf);
337static int del_if(struct wan_device* wandev, struct net_device* dev);
338static void disable_comm (sdla_t* card);
339static void disable_comm_shutdown(sdla_t *card);
340
341
342
343/*=================================================
344 * WANPIPE-specific entry points
345 */
346static int wpx_exec (struct sdla* card, void* u_cmd, void* u_data);
347static void x25api_bh(struct net_device *dev);
348static int x25api_bh_cleanup(struct net_device *dev);
349static int bh_enqueue(struct net_device *dev, struct sk_buff *skb);
350
351
352/*=================================================
353 * Network device interface
354 */
355static int if_init(struct net_device* dev);
356static int if_open(struct net_device* dev);
357static int if_close(struct net_device* dev);
358static int if_header(struct sk_buff* skb, struct net_device* dev,
359 unsigned short type, void* daddr, void* saddr, unsigned len);
360static int if_rebuild_hdr (struct sk_buff* skb);
361static int if_send(struct sk_buff* skb, struct net_device* dev);
362static struct net_device_stats *if_stats(struct net_device* dev);
363
364static void if_tx_timeout(struct net_device *dev);
365
366/*=================================================
367 * Interrupt handlers
368 */
369static void wpx_isr (sdla_t *);
370static void rx_intr (sdla_t *);
371static void tx_intr (sdla_t *);
372static void status_intr (sdla_t *);
373static void event_intr (sdla_t *);
374static void spur_intr (sdla_t *);
375static void timer_intr (sdla_t *);
376
377static int tx_intr_send(sdla_t *card, struct net_device *dev);
378static struct net_device *move_dev_to_next(sdla_t *card,
379 struct net_device *dev);
380
381/*=================================================
382 * Background polling routines
383 */
384static void wpx_poll (sdla_t* card);
385static void poll_disconnected (sdla_t* card);
386static void poll_connecting (sdla_t* card);
387static void poll_active (sdla_t* card);
388static void trigger_x25_poll(sdla_t *card);
389static void x25_timer_routine(unsigned long data);
390
391
392
393/*=================================================
394 * X.25 firmware interface functions
395 */
396static int x25_get_version (sdla_t* card, char* str);
397static int x25_configure (sdla_t* card, TX25Config* conf);
398static int hdlc_configure (sdla_t* card, TX25Config* conf);
399static int set_hdlc_level (sdla_t* card);
400static int x25_get_err_stats (sdla_t* card);
401static int x25_get_stats (sdla_t* card);
402static int x25_set_intr_mode (sdla_t* card, int mode);
403static int x25_close_hdlc (sdla_t* card);
404static int x25_open_hdlc (sdla_t* card);
405static int x25_setup_hdlc (sdla_t* card);
406static int x25_set_dtr (sdla_t* card, int dtr);
407static int x25_get_chan_conf (sdla_t* card, x25_channel_t* chan);
408static int x25_place_call (sdla_t* card, x25_channel_t* chan);
409static int x25_accept_call (sdla_t* card, int lcn, int qdm);
410static int x25_clear_call (sdla_t* card, int lcn, int cause, int diagn);
411static int x25_send (sdla_t* card, int lcn, int qdm, int len, void* buf);
412static int x25_fetch_events (sdla_t* card);
413static int x25_error (sdla_t* card, int err, int cmd, int lcn);
414
415/*=================================================
416 * X.25 asynchronous event handlers
417 */
418static int incoming_call (sdla_t* card, int cmd, int lcn, TX25Mbox* mb);
419static int call_accepted (sdla_t* card, int cmd, int lcn, TX25Mbox* mb);
420static int call_cleared (sdla_t* card, int cmd, int lcn, TX25Mbox* mb);
421static int timeout_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb);
422static int restart_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb);
423
424
425/*=================================================
426 * Miscellaneous functions
427 */
428static int connect (sdla_t* card);
429static int disconnect (sdla_t* card);
430static struct net_device* get_dev_by_lcn(struct wan_device* wandev,
431 unsigned lcn);
432static int chan_connect(struct net_device* dev);
433static int chan_disc(struct net_device* dev);
434static void set_chan_state(struct net_device* dev, int state);
435static int chan_send(struct net_device *dev, void* buff, unsigned data_len,
436 unsigned char tx_intr);
437static unsigned char bps_to_speed_code (unsigned long bps);
438static unsigned int dec_to_uint (unsigned char* str, int len);
439static unsigned int hex_to_uint (unsigned char*, int);
440static void parse_call_info (unsigned char*, x25_call_info_t*);
441static struct net_device *find_channel(sdla_t *card, unsigned lcn);
442static void bind_lcn_to_dev(sdla_t *card, struct net_device *dev, unsigned lcn);
443static void setup_for_delayed_transmit(struct net_device *dev,
444 void *buf, unsigned len);
445
446
447/*=================================================
448 * X25 API Functions
449 */
450static int wanpipe_pull_data_in_skb(sdla_t *card, struct net_device *dev,
451 struct sk_buff **);
452static void timer_intr_exec(sdla_t *, unsigned char);
453static int execute_delayed_cmd(sdla_t *card, struct net_device *dev,
454 mbox_cmd_t *usr_cmd, char bad_cmd);
455static int api_incoming_call (sdla_t*, TX25Mbox *, int);
456static int alloc_and_init_skb_buf (sdla_t *,struct sk_buff **, int);
457static void send_delayed_cmd_result(sdla_t *card, struct net_device *dev,
458 TX25Mbox* mbox);
459static int clear_confirm_event (sdla_t *, TX25Mbox*);
460static void send_oob_msg (sdla_t *card, struct net_device *dev, TX25Mbox *mbox);
461static int timer_intr_cmd_exec(sdla_t *card);
462static void api_oob_event (sdla_t *card,TX25Mbox *mbox);
463static int check_bad_command(sdla_t *card, struct net_device *dev);
464static int channel_disconnect(sdla_t* card, struct net_device *dev);
465static void hdlc_link_down (sdla_t*);
466
467/*=================================================
468 * XPIPEMON Functions
469 */
470static int process_udp_mgmt_pkt(sdla_t *);
471static int udp_pkt_type( struct sk_buff *, sdla_t*);
472static int reply_udp( unsigned char *, unsigned int);
473static void init_x25_channel_struct( x25_channel_t *);
474static void init_global_statistics( sdla_t *);
475static int store_udp_mgmt_pkt(int udp_type, char udp_pkt_src, sdla_t *card,
476 struct net_device *dev,
477 struct sk_buff *skb, int lcn);
478static unsigned short calc_checksum (char *, int);
479
480
481
482/*=================================================
483 * IPX functions
484 */
485static void switch_net_numbers(unsigned char *, unsigned long, unsigned char);
486static int handle_IPXWAN(unsigned char *, char *, unsigned char ,
487 unsigned long , unsigned short );
488
489extern void disable_irq(unsigned int);
490extern void enable_irq(unsigned int);
491
492static void S508_S514_lock(sdla_t *, unsigned long *);
493static void S508_S514_unlock(sdla_t *, unsigned long *);
494
495
496/*=================================================
497 * Global Variables
498 *=================================================*/
499
500
501
502/*=================================================
503 * Public Functions
504 *=================================================*/
505
506
507
508
509/*===================================================================
510 * wpx_init: X.25 Protocol Initialization routine.
511 *
512 * Purpose: To initialize the protocol/firmware.
513 *
514 * Rationale: This function is called by setup() function, in
515 * sdlamain.c, to dynamically setup the x25 protocol.
516 * This is the first protocol specific function, which
517 * executes once on startup.
518 *
519 * Description: This procedure initializes the x25 firmware and
520 * sets up the mailbox, transmit and receive buffer
521 * pointers. It also initializes all debugging structures
522 * and sets up the X25 environment.
523 *
524 * Sets up hardware options defined by user in [wanpipe#]
525 * section of wanpipe#.conf configuration file.
526 *
527 * At this point adapter is completely initialized
528 * and X.25 firmware is running.
529 * o read firmware version (to make sure it's alive)
530 * o configure adapter
531 * o initialize protocol-specific fields of the
532 * adapter data space.
533 *
534 * Called by: setup() function in sdlamain.c
535 *
536 * Assumptions: None
537 *
538 * Warnings: None
539 *
540 * Return: 0 o.k.
541 * < 0 failure.
542 */
543
544int wpx_init (sdla_t* card, wandev_conf_t* conf)
545{
546 union{
547 char str[80];
548 TX25Config cfg;
549 } u;
550
551 /* Verify configuration ID */
552 if (conf->config_id != WANCONFIG_X25){
553 printk(KERN_INFO "%s: invalid configuration ID %u!\n",
554 card->devname, conf->config_id)
555 ;
556 return -EINVAL;
557 }
558
559 /* Initialize protocol-specific fields */
560 card->mbox = (void*)(card->hw.dpmbase + X25_MBOX_OFFS);
561 card->rxmb = (void*)(card->hw.dpmbase + X25_RXMBOX_OFFS);
562 card->flags = (void*)(card->hw.dpmbase + X25_STATUS_OFFS);
563
564 /* Initialize for S514 Card */
565 if(card->hw.type == SDLA_S514) {
566 card->mbox += X25_MB_VECTOR;
567 card->flags += X25_MB_VECTOR;
568 card->rxmb += X25_MB_VECTOR;
569 }
570
571
572 /* Read firmware version. Note that when adapter initializes, it
573 * clears the mailbox, so it may appear that the first command was
574 * executed successfully when in fact it was merely erased. To work
575 * around this, we execute the first command twice.
576 */
577 if (x25_get_version(card, NULL) || x25_get_version(card, u.str))
578 return -EIO;
579
580
581 /* X25 firmware can run ether in X25 or LAPB HDLC mode.
582 * Check the user defined option and configure accordingly */
583 if (conf->u.x25.LAPB_hdlc_only == WANOPT_YES){
584 if (set_hdlc_level(card) != CMD_OK){
585 return -EIO;
586 }else{
587 printk(KERN_INFO "%s: running LAP_B HDLC firmware v%s\n",
588 card->devname, u.str);
589 }
590 card->u.x.LAPB_hdlc = 1;
591 }else{
592 printk(KERN_INFO "%s: running X.25 firmware v%s\n",
593 card->devname, u.str);
594 card->u.x.LAPB_hdlc = 0;
595 }
596
597 /* Configure adapter. Here we set resonable defaults, then parse
598 * device configuration structure and set configuration options.
599 * Most configuration options are verified and corrected (if
600 * necessary) since we can't rely on the adapter to do so.
601 */
602 memset(&u.cfg, 0, sizeof(u.cfg));
603 u.cfg.t1 = 3;
604 u.cfg.n2 = 10;
605 u.cfg.autoHdlc = 1; /* automatic HDLC connection */
606 u.cfg.hdlcWindow = 7;
607 u.cfg.pktWindow = 2;
608 u.cfg.station = 1; /* DTE */
609 u.cfg.options = 0x0090; /* disable D-bit pragmatics */
610 u.cfg.ccittCompat = 1988;
611 u.cfg.t10t20 = 30;
612 u.cfg.t11t21 = 30;
613 u.cfg.t12t22 = 30;
614 u.cfg.t13t23 = 30;
615 u.cfg.t16t26 = 30;
616 u.cfg.t28 = 30;
617 u.cfg.r10r20 = 5;
618 u.cfg.r12r22 = 5;
619 u.cfg.r13r23 = 5;
620 u.cfg.responseOpt = 1; /* RR's after every packet */
621
622 if (card->u.x.LAPB_hdlc){
623 u.cfg.hdlcMTU = 1027;
624 }
625
626 if (conf->u.x25.x25_conf_opt){
627 u.cfg.options = conf->u.x25.x25_conf_opt;
628 }
629
630 if (conf->clocking != WANOPT_EXTERNAL)
631 u.cfg.baudRate = bps_to_speed_code(conf->bps);
632
633 if (conf->station != WANOPT_DTE){
634 u.cfg.station = 0; /* DCE mode */
635 }
636
637 if (conf->interface != WANOPT_RS232 ){
638 u.cfg.hdlcOptions |= 0x80; /* V35 mode */
639 }
640
641 /* adjust MTU */
642 if (!conf->mtu || (conf->mtu >= 1024))
643 card->wandev.mtu = 1024;
644 else if (conf->mtu >= 512)
645 card->wandev.mtu = 512;
646 else if (conf->mtu >= 256)
647 card->wandev.mtu = 256;
648 else if (conf->mtu >= 128)
649 card->wandev.mtu = 128;
650 else
651 card->wandev.mtu = 64;
652
653 u.cfg.defPktSize = u.cfg.pktMTU = card->wandev.mtu;
654
655 if (conf->u.x25.hi_pvc){
656 card->u.x.hi_pvc = min_t(unsigned int, conf->u.x25.hi_pvc, MAX_LCN_NUM);
657 card->u.x.lo_pvc = min_t(unsigned int, conf->u.x25.lo_pvc, card->u.x.hi_pvc);
658 }
659
660 if (conf->u.x25.hi_svc){
661 card->u.x.hi_svc = min_t(unsigned int, conf->u.x25.hi_svc, MAX_LCN_NUM);
662 card->u.x.lo_svc = min_t(unsigned int, conf->u.x25.lo_svc, card->u.x.hi_svc);
663 }
664
665 /* Figure out the total number of channels to configure */
666 card->u.x.num_of_ch = 0;
667 if (card->u.x.hi_svc != 0){
668 card->u.x.num_of_ch = (card->u.x.hi_svc - card->u.x.lo_svc) + 1;
669 }
670 if (card->u.x.hi_pvc != 0){
671 card->u.x.num_of_ch += (card->u.x.hi_pvc - card->u.x.lo_pvc) + 1;
672 }
673
674 if (card->u.x.num_of_ch == 0){
675 printk(KERN_INFO "%s: ERROR, Minimum number of PVC/SVC channels is 1 !\n"
676 "%s: Please set the Lowest/Highest PVC/SVC values !\n",
677 card->devname,card->devname);
678 return -ECHRNG;
679 }
680
681 u.cfg.loPVC = card->u.x.lo_pvc;
682 u.cfg.hiPVC = card->u.x.hi_pvc;
683 u.cfg.loTwoWaySVC = card->u.x.lo_svc;
684 u.cfg.hiTwoWaySVC = card->u.x.hi_svc;
685
686 if (conf->u.x25.hdlc_window)
687 u.cfg.hdlcWindow = min_t(unsigned int, conf->u.x25.hdlc_window, 7);
688 if (conf->u.x25.pkt_window)
689 u.cfg.pktWindow = min_t(unsigned int, conf->u.x25.pkt_window, 7);
690
691 if (conf->u.x25.t1)
692 u.cfg.t1 = min_t(unsigned int, conf->u.x25.t1, 30);
693 if (conf->u.x25.t2)
694 u.cfg.t2 = min_t(unsigned int, conf->u.x25.t2, 29);
695 if (conf->u.x25.t4)
696 u.cfg.t4 = min_t(unsigned int, conf->u.x25.t4, 240);
697 if (conf->u.x25.n2)
698 u.cfg.n2 = min_t(unsigned int, conf->u.x25.n2, 30);
699
700 if (conf->u.x25.t10_t20)
701 u.cfg.t10t20 = min_t(unsigned int, conf->u.x25.t10_t20,255);
702 if (conf->u.x25.t11_t21)
703 u.cfg.t11t21 = min_t(unsigned int, conf->u.x25.t11_t21,255);
704 if (conf->u.x25.t12_t22)
705 u.cfg.t12t22 = min_t(unsigned int, conf->u.x25.t12_t22,255);
706 if (conf->u.x25.t13_t23)
707 u.cfg.t13t23 = min_t(unsigned int, conf->u.x25.t13_t23,255);
708 if (conf->u.x25.t16_t26)
709 u.cfg.t16t26 = min_t(unsigned int, conf->u.x25.t16_t26, 255);
710 if (conf->u.x25.t28)
711 u.cfg.t28 = min_t(unsigned int, conf->u.x25.t28, 255);
712
713 if (conf->u.x25.r10_r20)
714 u.cfg.r10r20 = min_t(unsigned int, conf->u.x25.r10_r20,250);
715 if (conf->u.x25.r12_r22)
716 u.cfg.r12r22 = min_t(unsigned int, conf->u.x25.r12_r22,250);
717 if (conf->u.x25.r13_r23)
718 u.cfg.r13r23 = min_t(unsigned int, conf->u.x25.r13_r23,250);
719
720
721 if (conf->u.x25.ccitt_compat)
722 u.cfg.ccittCompat = conf->u.x25.ccitt_compat;
723
724 /* initialize adapter */
725 if (card->u.x.LAPB_hdlc){
726 if (hdlc_configure(card, &u.cfg) != CMD_OK)
727 return -EIO;
728 }else{
729 if (x25_configure(card, &u.cfg) != CMD_OK)
730 return -EIO;
731 }
732
733 if ((x25_close_hdlc(card) != CMD_OK) || /* close HDLC link */
734 (x25_set_dtr(card, 0) != CMD_OK)) /* drop DTR */
735 return -EIO;
736
737 /* Initialize protocol-specific fields of adapter data space */
738 card->wandev.bps = conf->bps;
739 card->wandev.interface = conf->interface;
740 card->wandev.clocking = conf->clocking;
741 card->wandev.station = conf->station;
742 card->isr = &wpx_isr;
743 card->poll = NULL; //&wpx_poll;
744 card->disable_comm = &disable_comm;
745 card->exec = &wpx_exec;
746 card->wandev.update = &update;
747 card->wandev.new_if = &new_if;
748 card->wandev.del_if = &del_if;
749
750 /* WARNING: This function cannot exit with an error
751 * after the change of state */
752 card->wandev.state = WAN_DISCONNECTED;
753
754 card->wandev.enable_tx_int = 0;
755 card->irq_dis_if_send_count = 0;
756 card->irq_dis_poll_count = 0;
757 card->u.x.tx_dev = NULL;
758 card->u.x.no_dev = 0;
759
760
761 /* Configure for S514 PCI Card */
762 if (card->hw.type == SDLA_S514) {
763 card->u.x.hdlc_buf_status =
764 (volatile unsigned char *)
765 (card->hw.dpmbase + X25_MB_VECTOR+ X25_MISC_HDLC_BITS);
766 }else{
767 card->u.x.hdlc_buf_status =
768 (volatile unsigned char *)(card->hw.dpmbase + X25_MISC_HDLC_BITS);
769 }
770
771 card->u.x.poll_device=NULL;
772 card->wandev.udp_port = conf->udp_port;
773
774 /* Enable or disable call setup logging */
775 if (conf->u.x25.logging == WANOPT_YES){
776 printk(KERN_INFO "%s: Enabling Call Logging.\n",
777 card->devname);
778 card->u.x.logging = 1;
779 }else{
780 card->u.x.logging = 0;
781 }
782
783 /* Enable or disable modem status reporting */
784 if (conf->u.x25.oob_on_modem == WANOPT_YES){
785 printk(KERN_INFO "%s: Enabling OOB on Modem change.\n",
786 card->devname);
787 card->u.x.oob_on_modem = 1;
788 }else{
789 card->u.x.oob_on_modem = 0;
790 }
791
792 init_global_statistics(card);
793
794 INIT_WORK(&card->u.x.x25_poll_work, (void *)wpx_poll, card);
795
796 init_timer(&card->u.x.x25_timer);
797 card->u.x.x25_timer.data = (unsigned long)card;
798 card->u.x.x25_timer.function = x25_timer_routine;
799
800 return 0;
801}
802
803/*=========================================================
804 * WAN Device Driver Entry Points
805 *========================================================*/
806
807/*============================================================
808 * Name: update(), Update device status & statistics.
809 *
810 * Purpose: To provide debugging and statitical
811 * information to the /proc file system.
812 * /proc/net/wanrouter/wanpipe#
813 *
814 * Rationale: The /proc file system is used to collect
815 * information about the kernel and drivers.
816 * Using the /proc file system the user
817 * can see exactly what the sangoma drivers are
818 * doing. And in what state they are in.
819 *
820 * Description: Collect all driver statistical information
821 * and pass it to the top laywer.
822 *
823 * Since we have to execute a debugging command,
824 * to obtain firmware statitics, we trigger a
825 * UPDATE function within the timer interrtup.
826 * We wait until the timer update is complete.
827 * Once complete return the appropriate return
828 * code to indicate that the update was successful.
829 *
830 * Called by: device_stat() in wanmain.c
831 *
832 * Assumptions:
833 *
834 * Warnings: This function will degrade the performance
835 * of the router, since it uses the mailbox.
836 *
837 * Return: 0 OK
838 * <0 Failed (or busy).
839 */
840
841static int update(struct wan_device* wandev)
842{
843 volatile sdla_t* card;
844 TX25Status* status;
845 unsigned long timeout;
846
847 /* sanity checks */
848 if ((wandev == NULL) || (wandev->private == NULL))
849 return -EFAULT;
850
851 if (wandev->state == WAN_UNCONFIGURED)
852 return -ENODEV;
853
854 if (test_bit(SEND_CRIT, (void*)&wandev->critical))
855 return -EAGAIN;
856
857 if (!wandev->dev)
858 return -ENODEV;
859
860 card = wandev->private;
861 status = card->flags;
862
863 card->u.x.timer_int_enabled |= TMR_INT_ENABLED_UPDATE;
864 status->imask |= INTR_ON_TIMER;
865 timeout = jiffies;
866
867 for (;;){
868 if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_UPDATE)){
869 break;
870 }
871 if (time_after(jiffies, timeout + 1*HZ)){
872 card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_UPDATE;
873 return -EAGAIN;
874 }
875 }
876 return 0;
877}
878
879
880/*===================================================================
881 * Name: new_if
882 *
883 * Purpose: To allocate and initialize resources for a
884 * new logical channel.
885 *
886 * Rationale: A new channel can be added dynamically via
887 * ioctl call.
888 *
889 * Description: Allocate a private channel structure, x25_channel_t.
890 * Parse the user interface options from wanpipe#.conf
891 * configuration file.
892 * Bind the private are into the network device private
893 * area pointer (dev->priv).
894 * Prepare the network device structure for registration.
895 *
896 * Called by: ROUTER_IFNEW Ioctl call, from wanrouter_ioctl()
897 * (wanmain.c)
898 *
899 * Assumptions: None
900 *
901 * Warnings: None
902 *
903 * Return: 0 Ok
904 * <0 Failed (channel will not be created)
905 */
906static int new_if(struct wan_device* wandev, struct net_device* dev,
907 wanif_conf_t* conf)
908{
909 sdla_t* card = wandev->private;
910 x25_channel_t* chan;
911 int err = 0;
912
913 if ((conf->name[0] == '\0') || (strlen(conf->name) > WAN_IFNAME_SZ)){
914 printk(KERN_INFO "%s: invalid interface name!\n",
915 card->devname);
916 return -EINVAL;
917 }
918
919 if(card->wandev.new_if_cnt++ > 0 && card->u.x.LAPB_hdlc) {
920 printk(KERN_INFO "%s: Error: Running LAPB HDLC Mode !\n",
921 card->devname);
922 printk(KERN_INFO
923 "%s: Maximum number of network interfaces must be one !\n",
924 card->devname);
925 return -EEXIST;
926 }
927
928 /* allocate and initialize private data */
929 chan = kmalloc(sizeof(x25_channel_t), GFP_ATOMIC);
930 if (chan == NULL){
931 return -ENOMEM;
932 }
933
934 memset(chan, 0, sizeof(x25_channel_t));
935
936 /* Bug Fix: Seg Err on PVC startup
937 * It must be here since bind_lcn_to_dev expects
938 * it bellow */
939 dev->priv = chan;
940
941 strcpy(chan->name, conf->name);
942 chan->card = card;
943 chan->dev = dev;
944 chan->common.sk = NULL;
945 chan->common.func = NULL;
946 chan->common.rw_bind = 0;
947 chan->tx_skb = chan->rx_skb = NULL;
948
949 /* verify media address */
950 if (conf->addr[0] == '@'){ /* SVC */
951 chan->common.svc = 1;
952 strncpy(chan->addr, &conf->addr[1], WAN_ADDRESS_SZ);
953
954 /* Set channel timeouts (default if not specified) */
955 chan->idle_timeout = (conf->idle_timeout) ?
956 conf->idle_timeout : 90;
957 chan->hold_timeout = (conf->hold_timeout) ?
958 conf->hold_timeout : 10;
959
960 }else if (isdigit(conf->addr[0])){ /* PVC */
961 int lcn = dec_to_uint(conf->addr, 0);
962
963 if ((lcn >= card->u.x.lo_pvc) && (lcn <= card->u.x.hi_pvc)){
964 bind_lcn_to_dev (card, dev, lcn);
965 }else{
966 printk(KERN_ERR
967 "%s: PVC %u is out of range on interface %s!\n",
968 wandev->name, lcn, chan->name);
969 err = -EINVAL;
970 }
971 }else{
972 printk(KERN_ERR
973 "%s: invalid media address on interface %s!\n",
974 wandev->name, chan->name);
975 err = -EINVAL;
976 }
977
978 if(strcmp(conf->usedby, "WANPIPE") == 0){
979 printk(KERN_INFO "%s: Running in WANPIPE mode %s\n",
980 wandev->name, chan->name);
981 chan->common.usedby = WANPIPE;
982 chan->protocol = htons(ETH_P_IP);
983
984 }else if(strcmp(conf->usedby, "API") == 0){
985 chan->common.usedby = API;
986 printk(KERN_INFO "%s: Running in API mode %s\n",
987 wandev->name, chan->name);
988 chan->protocol = htons(X25_PROT);
989 }
990
991
992 if (err){
993 kfree(chan);
994 dev->priv = NULL;
995 return err;
996 }
997
998 chan->enable_IPX = conf->enable_IPX;
999
1000 if (chan->enable_IPX)
1001 chan->protocol = htons(ETH_P_IPX);
1002
1003 if (conf->network_number)
1004 chan->network_number = conf->network_number;
1005 else
1006 chan->network_number = 0xDEADBEEF;
1007
1008 /* prepare network device data space for registration */
1009 strcpy(dev->name,chan->name);
1010
1011 dev->init = &if_init;
1012
1013 init_x25_channel_struct(chan);
1014
1015 return 0;
1016}
1017
1018/*===================================================================
1019 * Name: del_if(), Remove a logical channel.
1020 *
1021 * Purpose: To dynamically remove a logical channel.
1022 *
1023 * Rationale: Each logical channel should be dynamically
1024 * removable. This functin is called by an
1025 * IOCTL_IFDEL ioctl call or shutdown().
1026 *
1027 * Description: Do nothing.
1028 *
1029 * Called by: IOCTL_IFDEL : wanrouter_ioctl() from wanmain.c
1030 * shutdown() from sdlamain.c
1031 *
1032 * Assumptions:
1033 *
1034 * Warnings:
1035 *
1036 * Return: 0 Ok. Void function.
1037 */
1038
1039//FIXME Del IF Should be taken out now.
1040
1041static int del_if(struct wan_device* wandev, struct net_device* dev)
1042{
1043 return 0;
1044}
1045
1046
1047/*============================================================
1048 * Name: wpx_exec
1049 *
1050 * Description: Execute adapter interface command.
1051 * This option is currently dissabled.
1052 *===========================================================*/
1053
1054static int wpx_exec (struct sdla* card, void* u_cmd, void* u_data)
1055{
1056 return 0;
1057}
1058
1059/*============================================================
1060 * Name: disable_comm
1061 *
1062 * Description: Disable communications during shutdown.
1063 * Dont check return code because there is
1064 * nothing we can do about it.
1065 *
1066 * Warning: Dev and private areas are gone at this point.
1067 *===========================================================*/
1068
1069static void disable_comm(sdla_t* card)
1070{
1071 disable_comm_shutdown(card);
1072 del_timer(&card->u.x.x25_timer);
1073 return;
1074}
1075
1076
1077/*============================================================
1078 * Network Device Interface
1079 *===========================================================*/
1080
1081/*===================================================================
1082 * Name: if_init(), Netowrk Interface Initialization
1083 *
1084 * Purpose: To initialize a network interface device structure.
1085 *
1086 * Rationale: During network interface startup, the if_init
1087 * is called by the kernel to initialize the
1088 * netowrk device structure. Thus a driver
1089 * can customze a network device.
1090 *
1091 * Description: Initialize the netowrk device call back
1092 * routines. This is where we tell the kernel
1093 * which function to use when it wants to send
1094 * via our interface.
1095 * Furthermore, we initialize the device flags,
1096 * MTU and physical address of the board.
1097 *
1098 * Called by: Kernel (/usr/src/linux/net/core/dev.c)
1099 * (dev->init())
1100 *
1101 * Assumptions: None
1102 *
1103 * Warnings: None
1104 *
1105 * Return: 0 Ok : Void function.
1106 */
1107static int if_init(struct net_device* dev)
1108{
1109 x25_channel_t* chan = dev->priv;
1110 sdla_t* card = chan->card;
1111 struct wan_device* wandev = &card->wandev;
1112
1113 /* Initialize device driver entry points */
1114 dev->open = &if_open;
1115 dev->stop = &if_close;
1116 dev->hard_header = &if_header;
1117 dev->rebuild_header = &if_rebuild_hdr;
1118 dev->hard_start_xmit = &if_send;
1119 dev->get_stats = &if_stats;
1120 dev->tx_timeout = &if_tx_timeout;
1121 dev->watchdog_timeo = TX_TIMEOUT;
1122
1123 /* Initialize media-specific parameters */
1124 dev->type = ARPHRD_PPP; /* ARP h/w type */
1125 dev->flags |= IFF_POINTOPOINT;
1126 dev->flags |= IFF_NOARP;
1127
1128 if (chan->common.usedby == API){
1129 dev->mtu = X25_CHAN_MTU+sizeof(x25api_hdr_t);
1130 }else{
1131 dev->mtu = card->wandev.mtu;
1132 }
1133
1134 dev->hard_header_len = X25_HRDHDR_SZ; /* media header length */
1135 dev->addr_len = 2; /* hardware address length */
1136
1137 if (!chan->common.svc){
1138 *(unsigned short*)dev->dev_addr = htons(chan->common.lcn);
1139 }
1140
1141 /* Initialize hardware parameters (just for reference) */
1142 dev->irq = wandev->irq;
1143 dev->dma = wandev->dma;
1144 dev->base_addr = wandev->ioport;
1145 dev->mem_start = (unsigned long)wandev->maddr;
1146 dev->mem_end = wandev->maddr + wandev->msize - 1;
1147
1148 /* Set transmit buffer queue length */
1149 dev->tx_queue_len = 100;
1150 SET_MODULE_OWNER(dev);
1151
1152 /* FIXME Why are we doing this */
1153 set_chan_state(dev, WAN_DISCONNECTED);
1154 return 0;
1155}
1156
1157
1158/*===================================================================
1159 * Name: if_open(), Open/Bring up the Netowrk Interface
1160 *
1161 * Purpose: To bring up a network interface.
1162 *
1163 * Rationale:
1164 *
1165 * Description: Open network interface.
1166 * o prevent module from unloading by incrementing use count
1167 * o if link is disconnected then initiate connection
1168 *
1169 * Called by: Kernel (/usr/src/linux/net/core/dev.c)
1170 * (dev->open())
1171 *
1172 * Assumptions: None
1173 *
1174 * Warnings: None
1175 *
1176 * Return: 0 Ok
1177 * <0 Failure: Interface will not come up.
1178 */
1179
1180static int if_open(struct net_device* dev)
1181{
1182 x25_channel_t* chan = dev->priv;
1183 sdla_t* card = chan->card;
1184 struct timeval tv;
1185 unsigned long smp_flags;
1186
1187 if (netif_running(dev))
1188 return -EBUSY;
1189
1190 chan->tq_working = 0;
1191
1192 /* Initialize the workqueue */
1193 INIT_WORK(&chan->common.wanpipe_work, (void *)x25api_bh, dev);
1194
1195 /* Allocate and initialize BH circular buffer */
1196 /* Add 1 to MAX_BH_BUFF so we don't have test with (MAX_BH_BUFF-1) */
1197 chan->bh_head = kmalloc((sizeof(bh_data_t)*(MAX_BH_BUFF+1)),GFP_ATOMIC);
1198
1199 if (chan->bh_head == NULL){
1200 printk(KERN_INFO "%s: ERROR, failed to allocate memory ! BH_BUFFERS !\n",
1201 card->devname);
1202
1203 return -ENOBUFS;
1204 }
1205 memset(chan->bh_head,0,(sizeof(bh_data_t)*(MAX_BH_BUFF+1)));
1206 atomic_set(&chan->bh_buff_used, 0);
1207
1208 /* Increment the number of interfaces */
1209 ++card->u.x.no_dev;
1210
1211 wanpipe_open(card);
1212
1213 /* LAPB protocol only uses one interface, thus
1214 * start the protocol after it comes up. */
1215 if (card->u.x.LAPB_hdlc){
1216 if (card->open_cnt == 1){
1217 TX25Status* status = card->flags;
1218 S508_S514_lock(card, &smp_flags);
1219 x25_set_intr_mode(card, INTR_ON_TIMER);
1220 status->imask &= ~INTR_ON_TIMER;
1221 S508_S514_unlock(card, &smp_flags);
1222 }
1223 }else{
1224 /* X25 can have multiple interfaces thus, start the
1225 * protocol once all interfaces are up */
1226
1227 //FIXME: There is a bug here. If interface is
1228 //brought down and up, it will try to enable comm.
1229 if (card->open_cnt == card->u.x.num_of_ch){
1230
1231 S508_S514_lock(card, &smp_flags);
1232 connect(card);
1233 S508_S514_unlock(card, &smp_flags);
1234
1235 mod_timer(&card->u.x.x25_timer, jiffies + HZ);
1236 }
1237 }
1238 /* Device is not up until the we are in connected state */
1239 do_gettimeofday( &tv );
1240 chan->router_start_time = tv.tv_sec;
1241
1242 netif_start_queue(dev);
1243
1244 return 0;
1245}
1246
1247/*===================================================================
1248 * Name: if_close(), Close/Bring down the Netowrk Interface
1249 *
1250 * Purpose: To bring down a network interface.
1251 *
1252 * Rationale:
1253 *
1254 * Description: Close network interface.
1255 * o decrement use module use count
1256 *
1257 * Called by: Kernel (/usr/src/linux/net/core/dev.c)
1258 * (dev->close())
1259 * ifconfig <name> down: will trigger the kernel
1260 * which will call this function.
1261 *
1262 * Assumptions: None
1263 *
1264 * Warnings: None
1265 *
1266 * Return: 0 Ok
1267 * <0 Failure: Interface will not exit properly.
1268 */
1269static int if_close(struct net_device* dev)
1270{
1271 x25_channel_t* chan = dev->priv;
1272 sdla_t* card = chan->card;
1273 unsigned long smp_flags;
1274
1275 netif_stop_queue(dev);
1276
1277 if ((chan->common.state == WAN_CONNECTED) ||
1278 (chan->common.state == WAN_CONNECTING)){
1279 S508_S514_lock(card, &smp_flags);
1280 chan_disc(dev);
1281 S508_S514_unlock(card, &smp_flags);
1282 }
1283
1284 wanpipe_close(card);
1285
1286 S508_S514_lock(card, &smp_flags);
1287 if (chan->bh_head){
1288 int i;
1289 struct sk_buff *skb;
1290
1291 for (i=0; i<(MAX_BH_BUFF+1); i++){
1292 skb = ((bh_data_t *)&chan->bh_head[i])->skb;
1293 if (skb != NULL){
1294 dev_kfree_skb_any(skb);
1295 }
1296 }
1297 kfree(chan->bh_head);
1298 chan->bh_head=NULL;
1299 }
1300 S508_S514_unlock(card, &smp_flags);
1301
1302 /* If this is the last close, disconnect physical link */
1303 if (!card->open_cnt){
1304 S508_S514_lock(card, &smp_flags);
1305 disconnect(card);
1306 x25_set_intr_mode(card, 0);
1307 S508_S514_unlock(card, &smp_flags);
1308 }
1309
1310 /* Decrement the number of interfaces */
1311 --card->u.x.no_dev;
1312 return 0;
1313}
1314
1315/*======================================================================
1316 * Build media header.
1317 * o encapsulate packet according to encapsulation type.
1318 *
1319 * The trick here is to put packet type (Ethertype) into 'protocol'
1320 * field of the socket buffer, so that we don't forget it.
1321 * If encapsulation fails, set skb->protocol to 0 and discard
1322 * packet later.
1323 *
1324 * Return: media header length.
1325 *======================================================================*/
1326
1327static int if_header(struct sk_buff* skb, struct net_device* dev,
1328 unsigned short type, void* daddr, void* saddr,
1329 unsigned len)
1330{
1331 x25_channel_t* chan = dev->priv;
1332 int hdr_len = dev->hard_header_len;
1333
1334 skb->protocol = htons(type);
1335 if (!chan->protocol){
1336 hdr_len = wanrouter_encapsulate(skb, dev, type);
1337 if (hdr_len < 0){
1338 hdr_len = 0;
1339 skb->protocol = htons(0);
1340 }
1341 }
1342 return hdr_len;
1343}
1344
1345/*===============================================================
1346 * Re-build media header.
1347 *
1348 * Return: 1 physical address resolved.
1349 * 0 physical address not resolved
1350 *==============================================================*/
1351
1352static int if_rebuild_hdr (struct sk_buff* skb)
1353{
1354 struct net_device *dev = skb->dev;
1355 x25_channel_t* chan = dev->priv;
1356 sdla_t* card = chan->card;
1357
1358 printk(KERN_INFO "%s: rebuild_header() called for interface %s!\n",
1359 card->devname, dev->name);
1360 return 1;
1361}
1362
1363
1364/*============================================================================
1365 * Handle transmit timeout event from netif watchdog
1366 */
1367static void if_tx_timeout(struct net_device *dev)
1368{
1369 x25_channel_t* chan = dev->priv;
1370 sdla_t *card = chan->card;
1371
1372 /* If our device stays busy for at least 5 seconds then we will
1373 * kick start the device by making dev->tbusy = 0. We expect
1374 * that our device never stays busy more than 5 seconds. So this
1375 * is only used as a last resort.
1376 */
1377
1378 ++chan->if_send_stat.if_send_tbusy_timeout;
1379 printk (KERN_INFO "%s: Transmit timed out on %s\n",
1380 card->devname, dev->name);
1381 netif_wake_queue (dev);
1382}
1383
1384
1385/*=========================================================================
1386 * Send a packet on a network interface.
1387 * o set tbusy flag (marks start of the transmission).
1388 * o check link state. If link is not up, then drop the packet.
1389 * o check channel status. If it's down then initiate a call.
1390 * o pass a packet to corresponding WAN device.
1391 * o free socket buffer
1392 *
1393 * Return: 0 complete (socket buffer must be freed)
1394 * non-0 packet may be re-transmitted (tbusy must be set)
1395 *
1396 * Notes:
1397 * 1. This routine is called either by the protocol stack or by the "net
1398 * bottom half" (with interrupts enabled).
1399 * 2. Setting tbusy flag will inhibit further transmit requests from the
1400 * protocol stack and can be used for flow control with protocol layer.
1401 *
1402 *========================================================================*/
1403
1404static int if_send(struct sk_buff* skb, struct net_device* dev)
1405{
1406 x25_channel_t* chan = dev->priv;
1407 sdla_t* card = chan->card;
1408 TX25Status* status = card->flags;
1409 int udp_type;
1410 unsigned long smp_flags=0;
1411
1412 ++chan->if_send_stat.if_send_entry;
1413
1414 netif_stop_queue(dev);
1415
1416 /* No need to check frame length, since socket code
1417 * will perform the check for us */
1418
1419 chan->tick_counter = jiffies;
1420
1421 /* Critical region starts here */
1422 S508_S514_lock(card, &smp_flags);
1423
1424 if (test_and_set_bit(SEND_CRIT, (void*)&card->wandev.critical)){
1425 printk(KERN_INFO "Hit critical in if_send()! %lx\n",card->wandev.critical);
1426 goto if_send_crit_exit;
1427 }
1428
1429 udp_type = udp_pkt_type(skb, card);
1430
1431 if(udp_type != UDP_INVALID_TYPE) {
1432
1433 if(store_udp_mgmt_pkt(udp_type, UDP_PKT_FRM_STACK, card, dev, skb,
1434 chan->common.lcn)) {
1435
1436 status->imask |= INTR_ON_TIMER;
1437 if (udp_type == UDP_XPIPE_TYPE){
1438 chan->if_send_stat.if_send_PIPE_request++;
1439 }
1440 }
1441 netif_start_queue(dev);
1442 clear_bit(SEND_CRIT,(void*)&card->wandev.critical);
1443 S508_S514_unlock(card, &smp_flags);
1444 return 0;
1445 }
1446
1447 if (chan->transmit_length){
1448 //FIXME: This check doesn't make sense any more
1449 if (chan->common.state != WAN_CONNECTED){
1450 chan->transmit_length=0;
1451 atomic_set(&chan->common.driver_busy,0);
1452 }else{
1453 netif_stop_queue(dev);
1454 ++card->u.x.tx_interrupts_pending;
1455 status->imask |= INTR_ON_TX_FRAME;
1456 clear_bit(SEND_CRIT,(void*)&card->wandev.critical);
1457 S508_S514_unlock(card, &smp_flags);
1458 return 1;
1459 }
1460 }
1461
1462 if (card->wandev.state != WAN_CONNECTED){
1463 ++chan->ifstats.tx_dropped;
1464 ++card->wandev.stats.tx_dropped;
1465 ++chan->if_send_stat.if_send_wan_disconnected;
1466
1467 }else if ( chan->protocol && (chan->protocol != skb->protocol)){
1468 printk(KERN_INFO
1469 "%s: unsupported Ethertype 0x%04X on interface %s!\n",
1470 chan->name, htons(skb->protocol), dev->name);
1471
1472 printk(KERN_INFO "PROTO %Xn", htons(chan->protocol));
1473 ++chan->ifstats.tx_errors;
1474 ++chan->ifstats.tx_dropped;
1475 ++card->wandev.stats.tx_dropped;
1476 ++chan->if_send_stat.if_send_protocol_error;
1477
1478 }else switch (chan->common.state){
1479
1480 case WAN_DISCONNECTED:
1481 /* Try to establish connection. If succeded, then start
1482 * transmission, else drop a packet.
1483 */
1484 if (chan->common.usedby == API){
1485 ++chan->ifstats.tx_dropped;
1486 ++card->wandev.stats.tx_dropped;
1487 break;
1488 }else{
1489 if (chan_connect(dev) != 0){
1490 ++chan->ifstats.tx_dropped;
1491 ++card->wandev.stats.tx_dropped;
1492 break;
1493 }
1494 }
1495 /* fall through */
1496
1497 case WAN_CONNECTED:
1498 if( skb->protocol == htons(ETH_P_IPX)) {
1499 if(chan->enable_IPX) {
1500 switch_net_numbers( skb->data,
1501 chan->network_number, 0);
1502 } else {
1503 ++card->wandev.stats.tx_dropped;
1504 ++chan->ifstats.tx_dropped;
1505 ++chan->if_send_stat.if_send_protocol_error;
1506 goto if_send_crit_exit;
1507 }
1508 }
1509 /* We never drop here, if cannot send than, copy
1510 * a packet into a transmit buffer
1511 */
1512 chan_send(dev, skb->data, skb->len, 0);
1513 break;
1514
1515 default:
1516 ++chan->ifstats.tx_dropped;
1517 ++card->wandev.stats.tx_dropped;
1518 break;
1519 }
1520
1521
1522if_send_crit_exit:
1523
1524 dev_kfree_skb_any(skb);
1525
1526 netif_start_queue(dev);
1527 clear_bit(SEND_CRIT,(void*)&card->wandev.critical);
1528 S508_S514_unlock(card, &smp_flags);
1529 return 0;
1530}
1531
1532/*============================================================================
1533 * Setup so that a frame can be transmitted on the occurrence of a transmit
1534 * interrupt.
1535 *===========================================================================*/
1536
1537static void setup_for_delayed_transmit(struct net_device* dev, void* buf,
1538 unsigned len)
1539{
1540 x25_channel_t* chan = dev->priv;
1541 sdla_t* card = chan->card;
1542 TX25Status* status = card->flags;
1543
1544 ++chan->if_send_stat.if_send_adptr_bfrs_full;
1545
1546 if(chan->transmit_length) {
1547 printk(KERN_INFO "%s: Error, transmit length set in delayed transmit!\n",
1548 card->devname);
1549 return;
1550 }
1551
1552 if (chan->common.usedby == API){
1553 if (len > X25_CHAN_MTU+sizeof(x25api_hdr_t)) {
1554 ++chan->ifstats.tx_dropped;
1555 ++card->wandev.stats.tx_dropped;
1556 printk(KERN_INFO "%s: Length is too big for delayed transmit\n",
1557 card->devname);
1558 return;
1559 }
1560 }else{
1561 if (len > X25_MAX_DATA) {
1562 ++chan->ifstats.tx_dropped;
1563 ++card->wandev.stats.tx_dropped;
1564 printk(KERN_INFO "%s: Length is too big for delayed transmit\n",
1565 card->devname);
1566 return;
1567 }
1568 }
1569
1570 chan->transmit_length = len;
1571 atomic_set(&chan->common.driver_busy,1);
1572 memcpy(chan->transmit_buffer, buf, len);
1573
1574 ++chan->if_send_stat.if_send_tx_int_enabled;
1575
1576 /* Enable Transmit Interrupt */
1577 ++card->u.x.tx_interrupts_pending;
1578 status->imask |= INTR_ON_TX_FRAME;
1579}
1580
1581
1582/*===============================================================
1583 * net_device_stats
1584 *
1585 * Get ethernet-style interface statistics.
1586 * Return a pointer to struct enet_statistics.
1587 *
1588 *==============================================================*/
1589static struct net_device_stats *if_stats(struct net_device* dev)
1590{
1591 x25_channel_t *chan = dev->priv;
1592
1593 if(chan == NULL)
1594 return NULL;
1595
1596 return &chan->ifstats;
1597}
1598
1599
1600/*
1601 * Interrupt Handlers
1602 */
1603
1604/*
1605 * X.25 Interrupt Service Routine.
1606 */
1607
1608static void wpx_isr (sdla_t* card)
1609{
1610 TX25Status* status = card->flags;
1611
1612 card->in_isr = 1;
1613 ++card->statistics.isr_entry;
1614
1615 if (test_bit(PERI_CRIT,(void*)&card->wandev.critical)){
1616 card->in_isr=0;
1617 status->iflags = 0;
1618 return;
1619 }
1620
1621 if (test_bit(SEND_CRIT, (void*)&card->wandev.critical)){
1622
1623 printk(KERN_INFO "%s: wpx_isr: wandev.critical set to 0x%02lx, int type = 0x%02x\n",
1624 card->devname, card->wandev.critical, status->iflags);
1625 card->in_isr = 0;
1626 status->iflags = 0;
1627 return;
1628 }
1629
1630 /* For all interrupts set the critical flag to CRITICAL_RX_INTR.
1631 * If the if_send routine is called with this flag set it will set
1632 * the enable transmit flag to 1. (for a delayed interrupt)
1633 */
1634 switch (status->iflags){
1635
1636 case RX_INTR_PENDING: /* receive interrupt */
1637 rx_intr(card);
1638 break;
1639
1640 case TX_INTR_PENDING: /* transmit interrupt */
1641 tx_intr(card);
1642 break;
1643
1644 case MODEM_INTR_PENDING: /* modem status interrupt */
1645 status_intr(card);
1646 break;
1647
1648 case X25_ASY_TRANS_INTR_PENDING: /* network event interrupt */
1649 event_intr(card);
1650 break;
1651
1652 case TIMER_INTR_PENDING:
1653 timer_intr(card);
1654 break;
1655
1656 default: /* unwanted interrupt */
1657 spur_intr(card);
1658 }
1659
1660 card->in_isr = 0;
1661 status->iflags = 0; /* clear interrupt condition */
1662}
1663
1664/*
1665 * Receive interrupt handler.
1666 * This routine handles fragmented IP packets using M-bit according to the
1667 * RFC1356.
1668 * o map ligical channel number to network interface.
1669 * o allocate socket buffer or append received packet to the existing one.
1670 * o if M-bit is reset (i.e. it's the last packet in a sequence) then
1671 * decapsulate packet and pass socket buffer to the protocol stack.
1672 *
1673 * Notes:
1674 * 1. When allocating a socket buffer, if M-bit is set then more data is
1675 * coming and we have to allocate buffer for the maximum IP packet size
1676 * expected on this channel.
1677 * 2. If something goes wrong and X.25 packet has to be dropped (e.g. no
1678 * socket buffers available) the whole packet sequence must be discarded.
1679 */
1680
1681static void rx_intr (sdla_t* card)
1682{
1683 TX25Mbox* rxmb = card->rxmb;
1684 unsigned lcn = rxmb->cmd.lcn;
1685 struct net_device* dev = find_channel(card,lcn);
1686 x25_channel_t* chan;
1687 struct sk_buff* skb=NULL;
1688
1689 if (dev == NULL){
1690 /* Invalid channel, discard packet */
1691 printk(KERN_INFO "%s: receiving on orphaned LCN %d!\n",
1692 card->devname, lcn);
1693 return;
1694 }
1695
1696 chan = dev->priv;
1697 chan->i_timeout_sofar = jiffies;
1698
1699
1700 /* Copy the data from the board, into an
1701 * skb buffer
1702 */
1703 if (wanpipe_pull_data_in_skb(card,dev,&skb)){
1704 ++chan->ifstats.rx_dropped;
1705 ++card->wandev.stats.rx_dropped;
1706 ++chan->rx_intr_stat.rx_intr_no_socket;
1707 ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack;
1708 return;
1709 }
1710
1711 dev->last_rx = jiffies; /* timestamp */
1712
1713
1714 /* ------------ API ----------------*/
1715
1716 if (chan->common.usedby == API){
1717
1718 if (bh_enqueue(dev, skb)){
1719 ++chan->ifstats.rx_dropped;
1720 ++card->wandev.stats.rx_dropped;
1721 ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack;
1722 dev_kfree_skb_any(skb);
1723 return;
1724 }
1725
1726 ++chan->ifstats.rx_packets;
1727 chan->ifstats.rx_bytes += skb->len;
1728
1729
1730 chan->rx_skb = NULL;
1731 if (!test_and_set_bit(0, &chan->tq_working)){
1732 wanpipe_queue_work(&chan->common.wanpipe_work);
1733 }
1734 return;
1735 }
1736
1737
1738 /* ------------- WANPIPE -------------------*/
1739
1740 /* set rx_skb to NULL so we won't access it later when kernel already owns it */
1741 chan->rx_skb=NULL;
1742
1743 /* Decapsulate packet, if necessary */
1744 if (!skb->protocol && !wanrouter_type_trans(skb, dev)){
1745 /* can't decapsulate packet */
1746 dev_kfree_skb_any(skb);
1747 ++chan->ifstats.rx_errors;
1748 ++chan->ifstats.rx_dropped;
1749 ++card->wandev.stats.rx_dropped;
1750 ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack;
1751
1752 }else{
1753 if( handle_IPXWAN(skb->data, chan->name,
1754 chan->enable_IPX, chan->network_number,
1755 skb->protocol)){
1756
1757 if( chan->enable_IPX ){
1758 if(chan_send(dev, skb->data, skb->len,0)){
1759 chan->tx_skb = skb;
1760 }else{
1761 dev_kfree_skb_any(skb);
1762 ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack;
1763 }
1764 }else{
1765 /* increment IPX packet dropped statistic */
1766 ++chan->ifstats.rx_dropped;
1767 ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack;
1768 }
1769 }else{
1770 skb->mac.raw = skb->data;
1771 chan->ifstats.rx_bytes += skb->len;
1772 ++chan->ifstats.rx_packets;
1773 ++chan->rx_intr_stat.rx_intr_bfr_passed_to_stack;
1774 netif_rx(skb);
1775 }
1776 }
1777
1778 return;
1779}
1780
1781
1782static int wanpipe_pull_data_in_skb(sdla_t *card, struct net_device *dev,
1783 struct sk_buff **skb)
1784{
1785 void *bufptr;
1786 TX25Mbox* rxmb = card->rxmb;
1787 unsigned len = rxmb->cmd.length; /* packet length */
1788 unsigned qdm = rxmb->cmd.qdm; /* Q,D and M bits */
1789 x25_channel_t *chan = dev->priv;
1790 struct sk_buff *new_skb = *skb;
1791
1792 if (chan->common.usedby == WANPIPE){
1793 if (chan->drop_sequence){
1794 if (!(qdm & 0x01)){
1795 chan->drop_sequence = 0;
1796 }
1797 return 1;
1798 }
1799 new_skb = chan->rx_skb;
1800 }else{
1801 /* Add on the API header to the received
1802 * data
1803 */
1804 len += sizeof(x25api_hdr_t);
1805 }
1806
1807 if (new_skb == NULL){
1808 int bufsize;
1809
1810 if (chan->common.usedby == WANPIPE){
1811 bufsize = (qdm & 0x01) ? dev->mtu : len;
1812 }else{
1813 bufsize = len;
1814 }
1815
1816 /* Allocate new socket buffer */
1817 new_skb = dev_alloc_skb(bufsize + dev->hard_header_len);
1818 if (new_skb == NULL){
1819 printk(KERN_INFO "%s: no socket buffers available!\n",
1820 card->devname);
1821 chan->drop_sequence = 1; /* set flag */
1822 ++chan->ifstats.rx_dropped;
1823 return 1;
1824 }
1825 }
1826
1827 if (skb_tailroom(new_skb) < len){
1828 /* No room for the packet. Call off the whole thing! */
1829 dev_kfree_skb_any(new_skb);
1830 if (chan->common.usedby == WANPIPE){
1831 chan->rx_skb = NULL;
1832 if (qdm & 0x01){
1833 chan->drop_sequence = 1;
1834 }
1835 }
1836
1837 printk(KERN_INFO "%s: unexpectedly long packet sequence "
1838 "on interface %s!\n", card->devname, dev->name);
1839 ++chan->ifstats.rx_length_errors;
1840 return 1;
1841 }
1842
1843 bufptr = skb_put(new_skb,len);
1844
1845
1846 if (chan->common.usedby == API){
1847 /* Fill in the x25api header
1848 */
1849 x25api_t * api_data = (x25api_t*)bufptr;
1850 api_data->hdr.qdm = rxmb->cmd.qdm;
1851 api_data->hdr.cause = rxmb->cmd.cause;
1852 api_data->hdr.diagn = rxmb->cmd.diagn;
1853 api_data->hdr.length = rxmb->cmd.length;
1854 memcpy(api_data->data, rxmb->data, rxmb->cmd.length);
1855 }else{
1856 memcpy(bufptr, rxmb->data, len);
1857 }
1858
1859 new_skb->dev = dev;
1860
1861 if (chan->common.usedby == API){
1862 new_skb->mac.raw = new_skb->data;
1863 new_skb->protocol = htons(X25_PROT);
1864 new_skb->pkt_type = WAN_PACKET_DATA;
1865 }else{
1866 new_skb->protocol = chan->protocol;
1867 chan->rx_skb = new_skb;
1868 }
1869
1870 /* If qdm bit is set, more data is coming
1871 * thus, exit and wait for more data before
1872 * sending the packet up. (Used by router only)
1873 */
1874 if ((qdm & 0x01) && (chan->common.usedby == WANPIPE))
1875 return 1;
1876
1877 *skb = new_skb;
1878
1879 return 0;
1880}
1881
1882/*===============================================================
1883 * tx_intr
1884 *
1885 * Transmit interrupt handler.
1886 * For each dev, check that there is something to send.
1887 * If data available, transmit.
1888 *
1889 *===============================================================*/
1890
1891static void tx_intr (sdla_t* card)
1892{
1893 struct net_device *dev;
1894 TX25Status* status = card->flags;
1895 unsigned char more_to_tx=0;
1896 x25_channel_t *chan=NULL;
1897 int i=0;
1898
1899 if (card->u.x.tx_dev == NULL){
1900 card->u.x.tx_dev = card->wandev.dev;
1901 }
1902
1903 dev = card->u.x.tx_dev;
1904
1905 for (;;){
1906
1907 chan = dev->priv;
1908 if (chan->transmit_length){
1909 /* Device was set to transmit, check if the TX
1910 * buffers are available
1911 */
1912 if (chan->common.state != WAN_CONNECTED){
1913 chan->transmit_length = 0;
1914 atomic_set(&chan->common.driver_busy,0);
1915 chan->tx_offset=0;
1916 if (netif_queue_stopped(dev)){
1917 if (chan->common.usedby == API){
1918 netif_start_queue(dev);
1919 wakeup_sk_bh(dev);
1920 }else{
1921 netif_wake_queue(dev);
1922 }
1923 }
1924 dev = move_dev_to_next(card,dev);
1925 break;
1926 }
1927
1928 if ((status->cflags[chan->ch_idx] & 0x40 || card->u.x.LAPB_hdlc) &&
1929 (*card->u.x.hdlc_buf_status & 0x40) ){
1930 /* Tx buffer available, we can send */
1931
1932 if (tx_intr_send(card, dev)){
1933 more_to_tx=1;
1934 }
1935
1936 /* If more than one interface present, move the
1937 * device pointer to the next interface, so on the
1938 * next TX interrupt we will try sending from it.
1939 */
1940 dev = move_dev_to_next(card,dev);
1941 break;
1942 }else{
1943 /* Tx buffers not available, but device set
1944 * the TX interrupt. Set more_to_tx and try
1945 * to transmit for other devices.
1946 */
1947 more_to_tx=1;
1948 dev = move_dev_to_next(card,dev);
1949 }
1950
1951 }else{
1952 /* This device was not set to transmit,
1953 * go to next
1954 */
1955 dev = move_dev_to_next(card,dev);
1956 }
1957
1958 if (++i == card->u.x.no_dev){
1959 if (!more_to_tx){
1960 DBG_PRINTK(KERN_INFO "%s: Nothing to Send in TX INTR\n",
1961 card->devname);
1962 }
1963 break;
1964 }
1965
1966 } //End of FOR
1967
1968 card->u.x.tx_dev = dev;
1969
1970 if (!more_to_tx){
1971 /* if any other interfaces have transmit interrupts pending, */
1972 /* do not disable the global transmit interrupt */
1973 if (!(--card->u.x.tx_interrupts_pending)){
1974 status->imask &= ~INTR_ON_TX_FRAME;
1975 }
1976 }
1977 return;
1978}
1979
1980/*===============================================================
1981 * move_dev_to_next
1982 *
1983 *
1984 *===============================================================*/
1985
1986
1987struct net_device *move_dev_to_next(sdla_t *card, struct net_device *dev)
1988{
1989 if (card->u.x.no_dev != 1){
1990 if (!*((struct net_device **)dev->priv))
1991 return card->wandev.dev;
1992 else
1993 return *((struct net_device **)dev->priv);
1994 }
1995 return dev;
1996}
1997
1998/*===============================================================
1999 * tx_intr_send
2000 *
2001 *
2002 *===============================================================*/
2003
2004static int tx_intr_send(sdla_t *card, struct net_device *dev)
2005{
2006 x25_channel_t* chan = dev->priv;
2007
2008 if (chan_send (dev,chan->transmit_buffer,chan->transmit_length,1)){
2009
2010 /* Packet was split up due to its size, do not disable
2011 * tx_intr
2012 */
2013 return 1;
2014 }
2015
2016 chan->transmit_length=0;
2017 atomic_set(&chan->common.driver_busy,0);
2018 chan->tx_offset=0;
2019
2020 /* If we are in API mode, wakeup the
2021 * sock BH handler, not the NET_BH */
2022 if (netif_queue_stopped(dev)){
2023 if (chan->common.usedby == API){
2024 netif_start_queue(dev);
2025 wakeup_sk_bh(dev);
2026 }else{
2027 netif_wake_queue(dev);
2028 }
2029 }
2030 return 0;
2031}
2032
2033
2034/*===============================================================
2035 * timer_intr
2036 *
2037 * Timer interrupt handler.
2038 * Check who called the timer interrupt and perform
2039 * action accordingly.
2040 *
2041 *===============================================================*/
2042
2043static void timer_intr (sdla_t *card)
2044{
2045 TX25Status* status = card->flags;
2046
2047 if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC){
2048
2049 if (timer_intr_cmd_exec(card) == 0){
2050 card->u.x.timer_int_enabled &=
2051 ~TMR_INT_ENABLED_CMD_EXEC;
2052 }
2053
2054 }else if(card->u.x.timer_int_enabled & TMR_INT_ENABLED_UDP_PKT) {
2055
2056 if ((*card->u.x.hdlc_buf_status & 0x40) &&
2057 card->u.x.udp_type == UDP_XPIPE_TYPE){
2058
2059 if(process_udp_mgmt_pkt(card)) {
2060 card->u.x.timer_int_enabled &=
2061 ~TMR_INT_ENABLED_UDP_PKT;
2062 }
2063 }
2064
2065 }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_ACTIVE) {
2066
2067 struct net_device *dev = card->u.x.poll_device;
2068 x25_channel_t *chan = NULL;
2069
2070 if (!dev){
2071 card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_ACTIVE;
2072 return;
2073 }
2074 chan = dev->priv;
2075
2076 printk(KERN_INFO
2077 "%s: Closing down Idle link %s on LCN %d\n",
2078 card->devname,chan->name,chan->common.lcn);
2079 chan->i_timeout_sofar = jiffies;
2080 chan_disc(dev);
2081 card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_ACTIVE;
2082 card->u.x.poll_device=NULL;
2083
2084 }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_CONNECT_ON) {
2085
2086 wanpipe_set_state(card, WAN_CONNECTED);
2087 if (card->u.x.LAPB_hdlc){
2088 struct net_device *dev = card->wandev.dev;
2089 set_chan_state(dev,WAN_CONNECTED);
2090 send_delayed_cmd_result(card,dev,card->mbox);
2091 }
2092
2093 /* 0x8F enable all interrupts */
2094 x25_set_intr_mode(card, INTR_ON_RX_FRAME|
2095 INTR_ON_TX_FRAME|
2096 INTR_ON_MODEM_STATUS_CHANGE|
2097 //INTR_ON_COMMAND_COMPLETE|
2098 X25_ASY_TRANS_INTR_PENDING |
2099 INTR_ON_TIMER |
2100 DIRECT_RX_INTR_USAGE
2101 );
2102
2103 status->imask &= ~INTR_ON_TX_FRAME; /* mask Tx interrupts */
2104 card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_CONNECT_ON;
2105
2106 }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_CONNECT_OFF) {
2107
2108 //printk(KERN_INFO "Poll connect, Turning OFF\n");
2109 disconnect(card);
2110 card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_CONNECT_OFF;
2111
2112 }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_DISCONNECT) {
2113
2114 //printk(KERN_INFO "POll disconnect, trying to connect\n");
2115 connect(card);
2116 card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_DISCONNECT;
2117
2118 }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_UPDATE){
2119
2120 if (*card->u.x.hdlc_buf_status & 0x40){
2121 x25_get_err_stats(card);
2122 x25_get_stats(card);
2123 card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_UPDATE;
2124 }
2125 }
2126
2127 if(!card->u.x.timer_int_enabled){
2128 //printk(KERN_INFO "Turning Timer Off \n");
2129 status->imask &= ~INTR_ON_TIMER;
2130 }
2131}
2132
2133/*====================================================================
2134 * Modem status interrupt handler.
2135 *===================================================================*/
2136static void status_intr (sdla_t* card)
2137{
2138
2139 /* Added to avoid Modem status message flooding */
2140 static TX25ModemStatus last_stat;
2141
2142 TX25Mbox* mbox = card->mbox;
2143 TX25ModemStatus *modem_status;
2144 struct net_device *dev;
2145 x25_channel_t *chan;
2146 int err;
2147
2148 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2149 mbox->cmd.command = X25_READ_MODEM_STATUS;
2150 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2151 if (err){
2152 x25_error(card, err, X25_READ_MODEM_STATUS, 0);
2153 }else{
2154
2155 modem_status = (TX25ModemStatus*)mbox->data;
2156
2157 /* Check if the last status was the same
2158 * if it was, do NOT print message again */
2159
2160 if (last_stat.status != modem_status->status){
2161
2162 printk(KERN_INFO "%s: Modem Status Change: DCD=%s, CTS=%s\n",
2163 card->devname,DCD(modem_status->status),CTS(modem_status->status));
2164
2165 last_stat.status = modem_status->status;
2166
2167 if (card->u.x.oob_on_modem){
2168
2169 mbox->cmd.pktType = mbox->cmd.command;
2170 mbox->cmd.result = 0x08;
2171
2172 /* Send a OOB to all connected sockets */
2173 for (dev = card->wandev.dev; dev;
2174 dev = *((struct net_device**)dev->priv)) {
2175 chan=dev->priv;
2176 if (chan->common.usedby == API){
2177 send_oob_msg(card,dev,mbox);
2178 }
2179 }
2180
2181 /* The modem OOB message will probably kill the
2182 * the link. If we don't clear the flag here,
2183 * a deadlock could occur */
2184 if (atomic_read(&card->u.x.command_busy)){
2185 atomic_set(&card->u.x.command_busy,0);
2186 }
2187 }
2188 }
2189 }
2190
2191 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2192 mbox->cmd.command = X25_HDLC_LINK_STATUS;
2193 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2194 if (err){
2195 x25_error(card, err, X25_HDLC_LINK_STATUS, 0);
2196 }
2197
2198}
2199
2200/*====================================================================
2201 * Network event interrupt handler.
2202 *===================================================================*/
2203static void event_intr (sdla_t* card)
2204{
2205 x25_fetch_events(card);
2206}
2207
2208/*====================================================================
2209 * Spurious interrupt handler.
2210 * o print a warning
2211 * o
2212 *====================================================================*/
2213
2214static void spur_intr (sdla_t* card)
2215{
2216 printk(KERN_INFO "%s: spurious interrupt!\n", card->devname);
2217}
2218
2219
2220/*
2221 * Background Polling Routines
2222 */
2223
2224/*====================================================================
2225 * Main polling routine.
2226 * This routine is repeatedly called by the WANPIPE 'thread' to allow for
2227 * time-dependent housekeeping work.
2228 *
2229 * Notes:
2230 * 1. This routine may be called on interrupt context with all interrupts
2231 * enabled. Beware!
2232 *====================================================================*/
2233
2234static void wpx_poll (sdla_t *card)
2235{
2236 if (!card->wandev.dev){
2237 goto wpx_poll_exit;
2238 }
2239
2240 if (card->open_cnt != card->u.x.num_of_ch){
2241 goto wpx_poll_exit;
2242 }
2243
2244 if (test_bit(PERI_CRIT,&card->wandev.critical)){
2245 goto wpx_poll_exit;
2246 }
2247
2248 if (test_bit(SEND_CRIT,&card->wandev.critical)){
2249 goto wpx_poll_exit;
2250 }
2251
2252 switch(card->wandev.state){
2253 case WAN_CONNECTED:
2254 poll_active(card);
2255 break;
2256
2257 case WAN_CONNECTING:
2258 poll_connecting(card);
2259 break;
2260
2261 case WAN_DISCONNECTED:
2262 poll_disconnected(card);
2263 break;
2264 }
2265
2266wpx_poll_exit:
2267 clear_bit(POLL_CRIT,&card->wandev.critical);
2268 return;
2269}
2270
2271static void trigger_x25_poll(sdla_t *card)
2272{
2273 schedule_work(&card->u.x.x25_poll_work);
2274}
2275
2276/*====================================================================
2277 * Handle physical link establishment phase.
2278 * o if connection timed out, disconnect the link.
2279 *===================================================================*/
2280
2281static void poll_connecting (sdla_t* card)
2282{
2283 volatile TX25Status* status = card->flags;
2284
2285 if (status->gflags & X25_HDLC_ABM){
2286
2287 timer_intr_exec (card, TMR_INT_ENABLED_POLL_CONNECT_ON);
2288
2289 }else if ((jiffies - card->state_tick) > CONNECT_TIMEOUT){
2290
2291 timer_intr_exec (card, TMR_INT_ENABLED_POLL_CONNECT_OFF);
2292
2293 }
2294}
2295
2296/*====================================================================
2297 * Handle physical link disconnected phase.
2298 * o if hold-down timeout has expired and there are open interfaces,
2299 * connect link.
2300 *===================================================================*/
2301
2302static void poll_disconnected (sdla_t* card)
2303{
2304 struct net_device *dev;
2305 x25_channel_t *chan;
2306 TX25Status* status = card->flags;
2307
2308 if (!card->u.x.LAPB_hdlc && card->open_cnt &&
2309 ((jiffies - card->state_tick) > HOLD_DOWN_TIME)){
2310 timer_intr_exec(card, TMR_INT_ENABLED_POLL_DISCONNECT);
2311 }
2312
2313
2314 if ((dev=card->wandev.dev) == NULL)
2315 return;
2316
2317 if ((chan=dev->priv) == NULL)
2318 return;
2319
2320 if (chan->common.usedby == API &&
2321 atomic_read(&chan->common.command) &&
2322 card->u.x.LAPB_hdlc){
2323
2324 if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC))
2325 card->u.x.timer_int_enabled |= TMR_INT_ENABLED_CMD_EXEC;
2326
2327 if (!(status->imask & INTR_ON_TIMER))
2328 status->imask |= INTR_ON_TIMER;
2329 }
2330
2331}
2332
2333/*====================================================================
2334 * Handle active link phase.
2335 * o fetch X.25 asynchronous events.
2336 * o kick off transmission on all interfaces.
2337 *===================================================================*/
2338
2339static void poll_active (sdla_t* card)
2340{
2341 struct net_device* dev;
2342 TX25Status* status = card->flags;
2343
2344 for (dev = card->wandev.dev; dev;
2345 dev = *((struct net_device **)dev->priv)){
2346 x25_channel_t* chan = dev->priv;
2347
2348 /* If SVC has been idle long enough, close virtual circuit */
2349 if ( chan->common.svc &&
2350 chan->common.state == WAN_CONNECTED &&
2351 chan->common.usedby == WANPIPE ){
2352
2353 if( (jiffies - chan->i_timeout_sofar) / HZ > chan->idle_timeout ){
2354 /* Close svc */
2355 card->u.x.poll_device=dev;
2356 timer_intr_exec (card, TMR_INT_ENABLED_POLL_ACTIVE);
2357 }
2358 }
2359
2360#ifdef PRINT_DEBUG
2361 chan->ifstats.tx_compressed = atomic_read(&chan->common.command);
2362 chan->ifstats.tx_errors = chan->common.state;
2363 chan->ifstats.rx_fifo_errors = atomic_read(&card->u.x.command_busy);
2364 ++chan->ifstats.tx_bytes;
2365
2366 chan->ifstats.rx_fifo_errors=atomic_read(&chan->common.disconnect);
2367 chan->ifstats.multicast=atomic_read(&chan->bh_buff_used);
2368 chan->ifstats.rx_length_errors=*card->u.x.hdlc_buf_status;
2369#endif
2370
2371 if (chan->common.usedby == API &&
2372 atomic_read(&chan->common.command) &&
2373 !card->u.x.LAPB_hdlc){
2374
2375 if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC))
2376 card->u.x.timer_int_enabled |= TMR_INT_ENABLED_CMD_EXEC;
2377
2378 if (!(status->imask & INTR_ON_TIMER))
2379 status->imask |= INTR_ON_TIMER;
2380 }
2381
2382 if ((chan->common.usedby == API) &&
2383 atomic_read(&chan->common.disconnect)){
2384
2385 if (chan->common.state == WAN_DISCONNECTED){
2386 atomic_set(&chan->common.disconnect,0);
2387 return;
2388 }
2389
2390 atomic_set(&chan->common.command,X25_CLEAR_CALL);
2391 if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC))
2392 card->u.x.timer_int_enabled |= TMR_INT_ENABLED_CMD_EXEC;
2393
2394 if (!(status->imask & INTR_ON_TIMER))
2395 status->imask |= INTR_ON_TIMER;
2396 }
2397 }
2398}
2399
2400static void timer_intr_exec(sdla_t *card, unsigned char TYPE)
2401{
2402 TX25Status* status = card->flags;
2403 card->u.x.timer_int_enabled |= TYPE;
2404 if (!(status->imask & INTR_ON_TIMER))
2405 status->imask |= INTR_ON_TIMER;
2406}
2407
2408
2409/*====================================================================
2410 * SDLA Firmware-Specific Functions
2411 *
2412 * Almost all X.25 commands can unexpetedly fail due to so called 'X.25
2413 * asynchronous events' such as restart, interrupt, incoming call request,
2414 * call clear request, etc. They can't be ignored and have to be delt with
2415 * immediately. To tackle with this problem we execute each interface
2416 * command in a loop until good return code is received or maximum number
2417 * of retries is reached. Each interface command returns non-zero return
2418 * code, an asynchronous event/error handler x25_error() is called.
2419 *====================================================================*/
2420
2421/*====================================================================
2422 * Read X.25 firmware version.
2423 * Put code version as ASCII string in str.
2424 *===================================================================*/
2425
2426static int x25_get_version (sdla_t* card, char* str)
2427{
2428 TX25Mbox* mbox = card->mbox;
2429 int retry = MAX_CMD_RETRY;
2430 int err;
2431
2432 do
2433 {
2434 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2435 mbox->cmd.command = X25_READ_CODE_VERSION;
2436 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2437 } while (err && retry-- &&
2438 x25_error(card, err, X25_READ_CODE_VERSION, 0));
2439
2440 if (!err && str)
2441 {
2442 int len = mbox->cmd.length;
2443
2444 memcpy(str, mbox->data, len);
2445 str[len] = '\0';
2446 }
2447 return err;
2448}
2449
2450/*====================================================================
2451 * Configure adapter.
2452 *===================================================================*/
2453
2454static int x25_configure (sdla_t* card, TX25Config* conf)
2455{
2456 TX25Mbox* mbox = card->mbox;
2457 int retry = MAX_CMD_RETRY;
2458 int err;
2459
2460 do{
2461 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2462 memcpy(mbox->data, (void*)conf, sizeof(TX25Config));
2463 mbox->cmd.length = sizeof(TX25Config);
2464 mbox->cmd.command = X25_SET_CONFIGURATION;
2465 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2466 } while (err && retry-- && x25_error(card, err, X25_SET_CONFIGURATION, 0));
2467 return err;
2468}
2469
2470/*====================================================================
2471 * Configure adapter for HDLC only.
2472 *===================================================================*/
2473
2474static int hdlc_configure (sdla_t* card, TX25Config* conf)
2475{
2476 TX25Mbox* mbox = card->mbox;
2477 int retry = MAX_CMD_RETRY;
2478 int err;
2479
2480 do{
2481 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2482 memcpy(mbox->data, (void*)conf, sizeof(TX25Config));
2483 mbox->cmd.length = sizeof(TX25Config);
2484 mbox->cmd.command = X25_HDLC_SET_CONFIG;
2485 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2486 } while (err && retry-- && x25_error(card, err, X25_SET_CONFIGURATION, 0));
2487
2488 return err;
2489}
2490
2491static int set_hdlc_level (sdla_t* card)
2492{
2493
2494 TX25Mbox* mbox = card->mbox;
2495 int retry = MAX_CMD_RETRY;
2496 int err;
2497
2498 do{
2499 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2500 mbox->cmd.command = SET_PROTOCOL_LEVEL;
2501 mbox->cmd.length = 1;
2502 mbox->data[0] = HDLC_LEVEL; //| DO_HDLC_LEVEL_ERROR_CHECKING;
2503 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2504 } while (err && retry-- && x25_error(card, err, SET_PROTOCOL_LEVEL, 0));
2505
2506 return err;
2507}
2508
2509
2510
2511/*====================================================================
2512 * Get communications error statistics.
2513 *====================================================================*/
2514
2515static int x25_get_err_stats (sdla_t* card)
2516{
2517 TX25Mbox* mbox = card->mbox;
2518 int retry = MAX_CMD_RETRY;
2519 int err;
2520
2521 do
2522 {
2523 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2524 mbox->cmd.command = X25_HDLC_READ_COMM_ERR;
2525 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2526 } while (err && retry-- && x25_error(card, err, X25_HDLC_READ_COMM_ERR, 0));
2527
2528 if (!err)
2529 {
2530 THdlcCommErr* stats = (void*)mbox->data;
2531
2532 card->wandev.stats.rx_over_errors = stats->rxOverrun;
2533 card->wandev.stats.rx_crc_errors = stats->rxBadCrc;
2534 card->wandev.stats.rx_missed_errors = stats->rxAborted;
2535 card->wandev.stats.tx_aborted_errors = stats->txAborted;
2536 }
2537 return err;
2538}
2539
2540/*====================================================================
2541 * Get protocol statistics.
2542 *===================================================================*/
2543
2544static int x25_get_stats (sdla_t* card)
2545{
2546 TX25Mbox* mbox = card->mbox;
2547 int retry = MAX_CMD_RETRY;
2548 int err;
2549
2550 do
2551 {
2552 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2553 mbox->cmd.command = X25_READ_STATISTICS;
2554 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2555 } while (err && retry-- && x25_error(card, err, X25_READ_STATISTICS, 0)) ;
2556
2557 if (!err)
2558 {
2559 TX25Stats* stats = (void*)mbox->data;
2560
2561 card->wandev.stats.rx_packets = stats->rxData;
2562 card->wandev.stats.tx_packets = stats->txData;
2563 }
2564 return err;
2565}
2566
2567/*====================================================================
2568 * Close HDLC link.
2569 *===================================================================*/
2570
2571static int x25_close_hdlc (sdla_t* card)
2572{
2573 TX25Mbox* mbox = card->mbox;
2574 int retry = MAX_CMD_RETRY;
2575 int err;
2576
2577 do
2578 {
2579 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2580 mbox->cmd.command = X25_HDLC_LINK_CLOSE;
2581 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2582 } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_CLOSE, 0));
2583
2584 return err;
2585}
2586
2587
2588/*====================================================================
2589 * Open HDLC link.
2590 *===================================================================*/
2591
2592static int x25_open_hdlc (sdla_t* card)
2593{
2594 TX25Mbox* mbox = card->mbox;
2595 int retry = MAX_CMD_RETRY;
2596 int err;
2597
2598 do
2599 {
2600 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2601 mbox->cmd.command = X25_HDLC_LINK_OPEN;
2602 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2603 } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_OPEN, 0));
2604
2605 return err;
2606}
2607
2608/*=====================================================================
2609 * Setup HDLC link.
2610 *====================================================================*/
2611static int x25_setup_hdlc (sdla_t* card)
2612{
2613 TX25Mbox* mbox = card->mbox;
2614 int retry = MAX_CMD_RETRY;
2615 int err;
2616
2617 do
2618 {
2619 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2620 mbox->cmd.command = X25_HDLC_LINK_SETUP;
2621 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2622 } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_SETUP, 0));
2623
2624 return err;
2625}
2626
2627/*====================================================================
2628 * Set (raise/drop) DTR.
2629 *===================================================================*/
2630
2631static int x25_set_dtr (sdla_t* card, int dtr)
2632{
2633 TX25Mbox* mbox = card->mbox;
2634 int retry = MAX_CMD_RETRY;
2635 int err;
2636
2637 do
2638 {
2639 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2640 mbox->data[0] = 0;
2641 mbox->data[2] = 0;
2642 mbox->data[1] = dtr ? 0x02 : 0x01;
2643 mbox->cmd.length = 3;
2644 mbox->cmd.command = X25_SET_GLOBAL_VARS;
2645 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2646 } while (err && retry-- && x25_error(card, err, X25_SET_GLOBAL_VARS, 0));
2647
2648 return err;
2649}
2650
2651/*====================================================================
2652 * Set interrupt mode.
2653 *===================================================================*/
2654
2655static int x25_set_intr_mode (sdla_t* card, int mode)
2656{
2657 TX25Mbox* mbox = card->mbox;
2658 int retry = MAX_CMD_RETRY;
2659 int err;
2660
2661 do
2662 {
2663 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2664 mbox->data[0] = mode;
2665 if (card->hw.fwid == SFID_X25_508){
2666 mbox->data[1] = card->hw.irq;
2667 mbox->data[2] = 2;
2668 mbox->cmd.length = 3;
2669 }else {
2670 mbox->cmd.length = 1;
2671 }
2672 mbox->cmd.command = X25_SET_INTERRUPT_MODE;
2673 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2674 } while (err && retry-- && x25_error(card, err, X25_SET_INTERRUPT_MODE, 0));
2675
2676 return err;
2677}
2678
2679/*====================================================================
2680 * Read X.25 channel configuration.
2681 *===================================================================*/
2682
2683static int x25_get_chan_conf (sdla_t* card, x25_channel_t* chan)
2684{
2685 TX25Mbox* mbox = card->mbox;
2686 int retry = MAX_CMD_RETRY;
2687 int lcn = chan->common.lcn;
2688 int err;
2689
2690 do{
2691 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2692 mbox->cmd.lcn = lcn;
2693 mbox->cmd.command = X25_READ_CHANNEL_CONFIG;
2694 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2695 } while (err && retry-- && x25_error(card, err, X25_READ_CHANNEL_CONFIG, lcn));
2696
2697 if (!err)
2698 {
2699 TX25Status* status = card->flags;
2700
2701 /* calculate an offset into the array of status bytes */
2702 if (card->u.x.hi_svc <= X25_MAX_CHAN){
2703
2704 chan->ch_idx = lcn - 1;
2705
2706 }else{
2707 int offset;
2708
2709 /* FIX: Apr 14 2000 : Nenad Corbic
2710 * The data field was being compared to 0x1F using
2711 * '&&' instead of '&'.
2712 * This caused X25API to fail for LCNs greater than 255.
2713 */
2714 switch (mbox->data[0] & 0x1F)
2715 {
2716 case 0x01:
2717 offset = status->pvc_map; break;
2718 case 0x03:
2719 offset = status->icc_map; break;
2720 case 0x07:
2721 offset = status->twc_map; break;
2722 case 0x0B:
2723 offset = status->ogc_map; break;
2724 default:
2725 offset = 0;
2726 }
2727 chan->ch_idx = lcn - 1 - offset;
2728 }
2729
2730 /* get actual transmit packet size on this channel */
2731 switch(mbox->data[1] & 0x38)
2732 {
2733 case 0x00:
2734 chan->tx_pkt_size = 16;
2735 break;
2736 case 0x08:
2737 chan->tx_pkt_size = 32;
2738 break;
2739 case 0x10:
2740 chan->tx_pkt_size = 64;
2741 break;
2742 case 0x18:
2743 chan->tx_pkt_size = 128;
2744 break;
2745 case 0x20:
2746 chan->tx_pkt_size = 256;
2747 break;
2748 case 0x28:
2749 chan->tx_pkt_size = 512;
2750 break;
2751 case 0x30:
2752 chan->tx_pkt_size = 1024;
2753 break;
2754 }
2755 if (card->u.x.logging)
2756 printk(KERN_INFO "%s: X.25 packet size on LCN %d is %d.\n",
2757 card->devname, lcn, chan->tx_pkt_size);
2758 }
2759 return err;
2760}
2761
2762/*====================================================================
2763 * Place X.25 call.
2764 *====================================================================*/
2765
2766static int x25_place_call (sdla_t* card, x25_channel_t* chan)
2767{
2768 TX25Mbox* mbox = card->mbox;
2769 int retry = MAX_CMD_RETRY;
2770 int err;
2771 char str[64];
2772
2773
2774 if (chan->protocol == htons(ETH_P_IP)){
2775 sprintf(str, "-d%s -uCC", chan->addr);
2776
2777 }else if (chan->protocol == htons(ETH_P_IPX)){
2778 sprintf(str, "-d%s -u800000008137", chan->addr);
2779
2780 }
2781
2782 do
2783 {
2784 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2785 strcpy(mbox->data, str);
2786 mbox->cmd.length = strlen(str);
2787 mbox->cmd.command = X25_PLACE_CALL;
2788 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2789 } while (err && retry-- && x25_error(card, err, X25_PLACE_CALL, 0));
2790
2791 if (!err){
2792 bind_lcn_to_dev (card, chan->dev, mbox->cmd.lcn);
2793 }
2794 return err;
2795}
2796
2797/*====================================================================
2798 * Accept X.25 call.
2799 *====================================================================*/
2800
2801static int x25_accept_call (sdla_t* card, int lcn, int qdm)
2802{
2803 TX25Mbox* mbox = card->mbox;
2804 int retry = MAX_CMD_RETRY;
2805 int err;
2806
2807 do
2808 {
2809 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2810 mbox->cmd.lcn = lcn;
2811 mbox->cmd.qdm = qdm;
2812 mbox->cmd.command = X25_ACCEPT_CALL;
2813 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2814 } while (err && retry-- && x25_error(card, err, X25_ACCEPT_CALL, lcn));
2815
2816 return err;
2817}
2818
2819/*====================================================================
2820 * Clear X.25 call.
2821 *====================================================================*/
2822
2823static int x25_clear_call (sdla_t* card, int lcn, int cause, int diagn)
2824{
2825 TX25Mbox* mbox = card->mbox;
2826 int retry = MAX_CMD_RETRY;
2827 int err;
2828
2829 do
2830 {
2831 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2832 mbox->cmd.lcn = lcn;
2833 mbox->cmd.cause = cause;
2834 mbox->cmd.diagn = diagn;
2835 mbox->cmd.command = X25_CLEAR_CALL;
2836 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2837 } while (err && retry-- && x25_error(card, err, X25_CLEAR_CALL, lcn));
2838
2839 return err;
2840}
2841
2842/*====================================================================
2843 * Send X.25 data packet.
2844 *====================================================================*/
2845
2846static int x25_send (sdla_t* card, int lcn, int qdm, int len, void* buf)
2847{
2848 TX25Mbox* mbox = card->mbox;
2849 int retry = MAX_CMD_RETRY;
2850 int err;
2851 unsigned char cmd;
2852
2853 if (card->u.x.LAPB_hdlc)
2854 cmd = X25_HDLC_WRITE;
2855 else
2856 cmd = X25_WRITE;
2857
2858 do
2859 {
2860 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2861 memcpy(mbox->data, buf, len);
2862 mbox->cmd.length = len;
2863 mbox->cmd.lcn = lcn;
2864
2865 if (card->u.x.LAPB_hdlc){
2866 mbox->cmd.pf = qdm;
2867 }else{
2868 mbox->cmd.qdm = qdm;
2869 }
2870
2871 mbox->cmd.command = cmd;
2872 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2873 } while (err && retry-- && x25_error(card, err, cmd , lcn));
2874
2875
2876 /* If buffers are busy the return code for LAPB HDLC is
2877 * 1. The above functions are looking for return code
2878 * of X25RES_NOT_READY if busy. */
2879
2880 if (card->u.x.LAPB_hdlc && err == 1){
2881 err = X25RES_NOT_READY;
2882 }
2883
2884 return err;
2885}
2886
2887/*====================================================================
2888 * Fetch X.25 asynchronous events.
2889 *===================================================================*/
2890
2891static int x25_fetch_events (sdla_t* card)
2892{
2893 TX25Status* status = card->flags;
2894 TX25Mbox* mbox = card->mbox;
2895 int err = 0;
2896
2897 if (status->gflags & 0x20)
2898 {
2899 memset(&mbox->cmd, 0, sizeof(TX25Cmd));
2900 mbox->cmd.command = X25_IS_DATA_AVAILABLE;
2901 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
2902 if (err) x25_error(card, err, X25_IS_DATA_AVAILABLE, 0);
2903 }
2904 return err;
2905}
2906
2907/*====================================================================
2908 * X.25 asynchronous event/error handler.
2909 * This routine is called each time interface command returns
2910 * non-zero return code to handle X.25 asynchronous events and
2911 * common errors. Return non-zero to repeat command or zero to
2912 * cancel it.
2913 *
2914 * Notes:
2915 * 1. This function may be called recursively, as handling some of the
2916 * asynchronous events (e.g. call request) requires execution of the
2917 * interface command(s) that, in turn, may also return asynchronous
2918 * events. To avoid re-entrancy problems we copy mailbox to dynamically
2919 * allocated memory before processing events.
2920 *====================================================================*/
2921
2922static int x25_error (sdla_t* card, int err, int cmd, int lcn)
2923{
2924 int retry = 1;
2925 unsigned dlen = ((TX25Mbox*)card->mbox)->cmd.length;
2926 TX25Mbox* mb;
2927
2928 mb = kmalloc(sizeof(TX25Mbox) + dlen, GFP_ATOMIC);
2929 if (mb == NULL)
2930 {
2931 printk(KERN_ERR "%s: x25_error() out of memory!\n",
2932 card->devname);
2933 return 0;
2934 }
2935 memcpy(mb, card->mbox, sizeof(TX25Mbox) + dlen);
2936 switch (err){
2937
2938 case X25RES_ASYNC_PACKET: /* X.25 asynchronous packet was received */
2939
2940 mb->data[dlen] = '\0';
2941
2942 switch (mb->cmd.pktType & 0x7F){
2943
2944 case ASE_CALL_RQST: /* incoming call */
2945 retry = incoming_call(card, cmd, lcn, mb);
2946 break;
2947
2948 case ASE_CALL_ACCEPTED: /* connected */
2949 retry = call_accepted(card, cmd, lcn, mb);
2950 break;
2951
2952 case ASE_CLEAR_RQST: /* call clear request */
2953 retry = call_cleared(card, cmd, lcn, mb);
2954 break;
2955
2956 case ASE_RESET_RQST: /* reset request */
2957 printk(KERN_INFO "%s: X.25 reset request on LCN %d! "
2958 "Cause:0x%02X Diagn:0x%02X\n",
2959 card->devname, mb->cmd.lcn, mb->cmd.cause,
2960 mb->cmd.diagn);
2961 api_oob_event (card,mb);
2962 break;
2963
2964 case ASE_RESTART_RQST: /* restart request */
2965 retry = restart_event(card, cmd, lcn, mb);
2966 break;
2967
2968 case ASE_CLEAR_CONFRM:
2969 if (clear_confirm_event (card,mb))
2970 break;
2971
2972 /* I use the goto statement here so if
2973 * somebody inserts code between the
2974 * case and default, we will not have
2975 * ghost problems */
2976
2977 goto dflt_1;
2978
2979 default:
2980dflt_1:
2981 printk(KERN_INFO "%s: X.25 event 0x%02X on LCN %d! "
2982 "Cause:0x%02X Diagn:0x%02X\n",
2983 card->devname, mb->cmd.pktType,
2984 mb->cmd.lcn, mb->cmd.cause, mb->cmd.diagn);
2985 }
2986 break;
2987
2988 case X25RES_PROTO_VIOLATION: /* X.25 protocol violation indication */
2989
2990 /* Bug Fix: Mar 14 2000
2991 * The Protocol violation error conditions were
2992 * not handled previously */
2993
2994 switch (mb->cmd.pktType & 0x7F){
2995
2996 case PVE_CLEAR_RQST: /* Clear request */
2997 retry = call_cleared(card, cmd, lcn, mb);
2998 break;
2999
3000 case PVE_RESET_RQST: /* Reset request */
3001 printk(KERN_INFO "%s: X.25 reset request on LCN %d! "
3002 "Cause:0x%02X Diagn:0x%02X\n",
3003 card->devname, mb->cmd.lcn, mb->cmd.cause,
3004 mb->cmd.diagn);
3005 api_oob_event (card,mb);
3006 break;
3007
3008 case PVE_RESTART_RQST: /* Restart request */
3009 retry = restart_event(card, cmd, lcn, mb);
3010 break;
3011
3012 default :
3013 printk(KERN_INFO
3014 "%s: X.25 protocol violation on LCN %d! "
3015 "Packet:0x%02X Cause:0x%02X Diagn:0x%02X\n",
3016 card->devname, mb->cmd.lcn,
3017 mb->cmd.pktType & 0x7F, mb->cmd.cause, mb->cmd.diagn);
3018 api_oob_event(card,mb);
3019 }
3020 break;
3021
3022 case 0x42: /* X.25 timeout */
3023 retry = timeout_event(card, cmd, lcn, mb);
3024 break;
3025
3026 case 0x43: /* X.25 retry limit exceeded */
3027 printk(KERN_INFO
3028 "%s: exceeded X.25 retry limit on LCN %d! "
3029 "Packet:0x%02X Diagn:0x%02X\n", card->devname,
3030 mb->cmd.lcn, mb->cmd.pktType, mb->cmd.diagn)
3031 ;
3032 break;
3033
3034 case 0x08: /* modem failure */
3035#ifndef MODEM_NOT_LOG
3036 printk(KERN_INFO "%s: modem failure!\n", card->devname);
3037#endif /* MODEM_NOT_LOG */
3038 api_oob_event(card,mb);
3039 break;
3040
3041 case 0x09: /* N2 retry limit */
3042 printk(KERN_INFO "%s: exceeded HDLC retry limit!\n",
3043 card->devname);
3044 api_oob_event(card,mb);
3045 break;
3046
3047 case 0x06: /* unnumbered frame was received while in ABM */
3048 printk(KERN_INFO "%s: received Unnumbered frame 0x%02X!\n",
3049 card->devname, mb->data[0]);
3050 api_oob_event(card,mb);
3051 break;
3052
3053 case CMD_TIMEOUT:
3054 printk(KERN_ERR "%s: command 0x%02X timed out!\n",
3055 card->devname, cmd)
3056 ;
3057 retry = 0; /* abort command */
3058 break;
3059
3060 case X25RES_NOT_READY:
3061 retry = 1;
3062 break;
3063
3064 case 0x01:
3065 if (card->u.x.LAPB_hdlc)
3066 break;
3067
3068 if (mb->cmd.command == 0x16)
3069 break;
3070 /* I use the goto statement here so if
3071 * somebody inserts code between the
3072 * case and default, we will not have
3073 * ghost problems */
3074 goto dflt_2;
3075
3076 default:
3077dflt_2:
3078 printk(KERN_INFO "%s: command 0x%02X returned 0x%02X! Lcn %i\n",
3079 card->devname, cmd, err, mb->cmd.lcn)
3080 ;
3081 retry = 0; /* abort command */
3082 }
3083 kfree(mb);
3084 return retry;
3085}
3086
3087/*====================================================================
3088 * X.25 Asynchronous Event Handlers
3089 * These functions are called by the x25_error() and should return 0, if
3090 * the command resulting in the asynchronous event must be aborted.
3091 *====================================================================*/
3092
3093
3094
3095/*====================================================================
3096 *Handle X.25 incoming call request.
3097 * RFC 1356 establishes the following rules:
3098 * 1. The first octet in the Call User Data (CUD) field of the call
3099 * request packet contains NLPID identifying protocol encapsulation
3100 * 2. Calls MUST NOT be accepted unless router supports requested
3101 * protocol encapsulation.
3102 * 3. A diagnostic code 249 defined by ISO/IEC 8208 may be used
3103 * when clearing a call because protocol encapsulation is not
3104 * supported.
3105 * 4. If an incoming call is received while a call request is
3106 * pending (i.e. call collision has occurred), the incoming call
3107 * shall be rejected and call request shall be retried.
3108 *====================================================================*/
3109
3110static int incoming_call (sdla_t* card, int cmd, int lcn, TX25Mbox* mb)
3111{
3112 struct wan_device* wandev = &card->wandev;
3113 int new_lcn = mb->cmd.lcn;
3114 struct net_device* dev = get_dev_by_lcn(wandev, new_lcn);
3115 x25_channel_t* chan = NULL;
3116 int accept = 0; /* set to '1' if o.k. to accept call */
3117 unsigned int user_data;
3118 x25_call_info_t* info;
3119
3120 /* Make sure there is no call collision */
3121 if (dev != NULL)
3122 {
3123 printk(KERN_INFO
3124 "%s: X.25 incoming call collision on LCN %d!\n",
3125 card->devname, new_lcn);
3126
3127 x25_clear_call(card, new_lcn, 0, 0);
3128 return 1;
3129 }
3130
3131 /* Make sure D bit is not set in call request */
3132//FIXME: THIS IS NOT TURE !!!! TAKE IT OUT
3133// if (mb->cmd.qdm & 0x02)
3134// {
3135// printk(KERN_INFO
3136// "%s: X.25 incoming call on LCN %d with D-bit set!\n",
3137// card->devname, new_lcn);
3138//
3139// x25_clear_call(card, new_lcn, 0, 0);
3140// return 1;
3141// }
3142
3143 /* Parse call request data */
3144 info = kmalloc(sizeof(x25_call_info_t), GFP_ATOMIC);
3145 if (info == NULL)
3146 {
3147 printk(KERN_ERR
3148 "%s: not enough memory to parse X.25 incoming call "
3149 "on LCN %d!\n", card->devname, new_lcn);
3150 x25_clear_call(card, new_lcn, 0, 0);
3151 return 1;
3152 }
3153
3154 parse_call_info(mb->data, info);
3155
3156 if (card->u.x.logging)
3157 printk(KERN_INFO "\n%s: X.25 incoming call on LCN %d!\n",
3158 card->devname, new_lcn);
3159
3160 /* Conver the first two ASCII characters into an
3161 * interger. Used to check the incoming protocol
3162 */
3163 user_data = hex_to_uint(info->user,2);
3164
3165 /* Find available channel */
3166 for (dev = wandev->dev; dev; dev = *((struct net_device **)dev->priv)) {
3167 chan = dev->priv;
3168
3169 if (chan->common.usedby == API)
3170 continue;
3171
3172 if (!chan->common.svc || (chan->common.state != WAN_DISCONNECTED))
3173 continue;
3174
3175 if (user_data == NLPID_IP && chan->protocol != htons(ETH_P_IP)){
3176 printk(KERN_INFO "IP packet but configured for IPX : %x, %x\n",
3177 htons(chan->protocol), info->user[0]);
3178 continue;
3179 }
3180
3181 if (user_data == NLPID_SNAP && chan->protocol != htons(ETH_P_IPX)){
3182 printk(KERN_INFO "IPX packet but configured for IP: %x\n",
3183 htons(chan->protocol));
3184 continue;
3185 }
3186 if (strcmp(info->src, chan->addr) == 0)
3187 break;
3188
3189 /* If just an '@' is specified, accept all incoming calls */
3190 if (strcmp(chan->addr, "") == 0)
3191 break;
3192 }
3193
3194 if (dev == NULL){
3195
3196 /* If the call is not for any WANPIPE interfaces
3197 * check to see if there is an API listening queue
3198 * waiting for data. If there is send the packet
3199 * up the stack.
3200 */
3201 if (card->sk != NULL && card->func != NULL){
3202 if (api_incoming_call(card,mb,new_lcn)){
3203 x25_clear_call(card, new_lcn, 0, 0);
3204 }
3205 accept = 0;
3206 }else{
3207 printk(KERN_INFO "%s: no channels available!\n",
3208 card->devname);
3209
3210 x25_clear_call(card, new_lcn, 0, 0);
3211 }
3212
3213 }else if (info->nuser == 0){
3214
3215 printk(KERN_INFO
3216 "%s: no user data in incoming call on LCN %d!\n",
3217 card->devname, new_lcn)
3218 ;
3219 x25_clear_call(card, new_lcn, 0, 0);
3220
3221 }else switch (info->user[0]){
3222
3223 case 0: /* multiplexed */
3224 chan->protocol = htons(0);
3225 accept = 1;
3226 break;
3227
3228 case NLPID_IP: /* IP datagrams */
3229 accept = 1;
3230 break;
3231
3232 case NLPID_SNAP: /* IPX datagrams */
3233 accept = 1;
3234 break;
3235
3236 default:
3237 printk(KERN_INFO
3238 "%s: unsupported NLPID 0x%02X in incoming call "
3239 "on LCN %d!\n", card->devname, info->user[0], new_lcn);
3240 x25_clear_call(card, new_lcn, 0, 249);
3241 }
3242
3243 if (accept && (x25_accept_call(card, new_lcn, 0) == CMD_OK)){
3244
3245 bind_lcn_to_dev (card, chan->dev, new_lcn);
3246
3247 if (x25_get_chan_conf(card, chan) == CMD_OK)
3248 set_chan_state(dev, WAN_CONNECTED);
3249 else
3250 x25_clear_call(card, new_lcn, 0, 0);
3251 }
3252 kfree(info);
3253 return 1;
3254}
3255
3256/*====================================================================
3257 * Handle accepted call.
3258 *====================================================================*/
3259
3260static int call_accepted (sdla_t* card, int cmd, int lcn, TX25Mbox* mb)
3261{
3262 unsigned new_lcn = mb->cmd.lcn;
3263 struct net_device* dev = find_channel(card, new_lcn);
3264 x25_channel_t* chan;
3265
3266 if (dev == NULL){
3267 printk(KERN_INFO
3268 "%s: clearing orphaned connection on LCN %d!\n",
3269 card->devname, new_lcn);
3270 x25_clear_call(card, new_lcn, 0, 0);
3271 return 1;
3272 }
3273
3274 if (card->u.x.logging)
3275 printk(KERN_INFO "%s: X.25 call accepted on Dev %s and LCN %d!\n",
3276 card->devname, dev->name, new_lcn);
3277
3278 /* Get channel configuration and notify router */
3279 chan = dev->priv;
3280 if (x25_get_chan_conf(card, chan) != CMD_OK)
3281 {
3282 x25_clear_call(card, new_lcn, 0, 0);
3283 return 1;
3284 }
3285
3286 set_chan_state(dev, WAN_CONNECTED);
3287
3288 if (chan->common.usedby == API){
3289 send_delayed_cmd_result(card,dev,mb);
3290 bind_lcn_to_dev (card, dev, new_lcn);
3291 }
3292
3293 return 1;
3294}
3295
3296/*====================================================================
3297 * Handle cleared call.
3298 *====================================================================*/
3299
3300static int call_cleared (sdla_t* card, int cmd, int lcn, TX25Mbox* mb)
3301{
3302 unsigned new_lcn = mb->cmd.lcn;
3303 struct net_device* dev = find_channel(card, new_lcn);
3304 x25_channel_t *chan;
3305 unsigned char old_state;
3306
3307 if (card->u.x.logging){
3308 printk(KERN_INFO "%s: X.25 clear request on LCN %d! Cause:0x%02X "
3309 "Diagn:0x%02X\n",
3310 card->devname, new_lcn, mb->cmd.cause, mb->cmd.diagn);
3311 }
3312
3313 if (dev == NULL){
3314 printk(KERN_INFO "%s: X.25 clear request : No device for clear\n",
3315 card->devname);
3316 return 1;
3317 }
3318
3319 chan=dev->priv;
3320
3321 old_state = chan->common.state;
3322
3323 set_chan_state(dev, WAN_DISCONNECTED);
3324
3325 if (chan->common.usedby == API){
3326
3327 switch (old_state){
3328
3329 case WAN_CONNECTING:
3330 send_delayed_cmd_result(card,dev,mb);
3331 break;
3332 case WAN_CONNECTED:
3333 send_oob_msg(card,dev,mb);
3334 break;
3335 }
3336 }
3337
3338 return ((cmd == X25_WRITE) && (lcn == new_lcn)) ? 0 : 1;
3339}
3340
3341/*====================================================================
3342 * Handle X.25 restart event.
3343 *====================================================================*/
3344
3345static int restart_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb)
3346{
3347 struct wan_device* wandev = &card->wandev;
3348 struct net_device* dev;
3349 x25_channel_t *chan;
3350 unsigned char old_state;
3351
3352 printk(KERN_INFO
3353 "%s: X.25 restart request! Cause:0x%02X Diagn:0x%02X\n",
3354 card->devname, mb->cmd.cause, mb->cmd.diagn);
3355
3356 /* down all logical channels */
3357 for (dev = wandev->dev; dev; dev = *((struct net_device **)dev->priv)) {
3358 chan=dev->priv;
3359 old_state = chan->common.state;
3360
3361 set_chan_state(dev, WAN_DISCONNECTED);
3362
3363 if (chan->common.usedby == API){
3364 switch (old_state){
3365
3366 case WAN_CONNECTING:
3367 send_delayed_cmd_result(card,dev,mb);
3368 break;
3369 case WAN_CONNECTED:
3370 send_oob_msg(card,dev,mb);
3371 break;
3372 }
3373 }
3374 }
3375 return (cmd == X25_WRITE) ? 0 : 1;
3376}
3377
3378/*====================================================================
3379 * Handle timeout event.
3380 *====================================================================*/
3381
3382static int timeout_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb)
3383{
3384 unsigned new_lcn = mb->cmd.lcn;
3385
3386 if (mb->cmd.pktType == 0x05) /* call request time out */
3387 {
3388 struct net_device* dev = find_channel(card,new_lcn);
3389
3390 printk(KERN_INFO "%s: X.25 call timed timeout on LCN %d!\n",
3391 card->devname, new_lcn);
3392
3393 if (dev){
3394 x25_channel_t *chan = dev->priv;
3395 set_chan_state(dev, WAN_DISCONNECTED);
3396
3397 if (chan->common.usedby == API){
3398 send_delayed_cmd_result(card,dev,card->mbox);
3399 }
3400 }
3401 }else{
3402 printk(KERN_INFO "%s: X.25 packet 0x%02X timeout on LCN %d!\n",
3403 card->devname, mb->cmd.pktType, new_lcn);
3404 }
3405 return 1;
3406}
3407
3408/*
3409 * Miscellaneous
3410 */
3411
3412/*====================================================================
3413 * Establish physical connection.
3414 * o open HDLC and raise DTR
3415 *
3416 * Return: 0 connection established
3417 * 1 connection is in progress
3418 * <0 error
3419 *===================================================================*/
3420
3421static int connect (sdla_t* card)
3422{
3423 TX25Status* status = card->flags;
3424
3425 if (x25_open_hdlc(card) || x25_setup_hdlc(card))
3426 return -EIO;
3427
3428 wanpipe_set_state(card, WAN_CONNECTING);
3429
3430 x25_set_intr_mode(card, INTR_ON_TIMER);
3431 status->imask &= ~INTR_ON_TIMER;
3432
3433 return 1;
3434}
3435
3436/*
3437 * Tear down physical connection.
3438 * o close HDLC link
3439 * o drop DTR
3440 *
3441 * Return: 0
3442 * <0 error
3443 */
3444
3445static int disconnect (sdla_t* card)
3446{
3447 wanpipe_set_state(card, WAN_DISCONNECTED);
3448 x25_set_intr_mode(card, INTR_ON_TIMER); /* disable all interrupt except timer */
3449 x25_close_hdlc(card); /* close HDLC link */
3450 x25_set_dtr(card, 0); /* drop DTR */
3451 return 0;
3452}
3453
3454/*
3455 * Find network device by its channel number.
3456 */
3457
3458static struct net_device* get_dev_by_lcn(struct wan_device* wandev,
3459 unsigned lcn)
3460{
3461 struct net_device* dev;
3462
3463 for (dev = wandev->dev; dev; dev = *((struct net_device **)dev->priv))
3464 if (((x25_channel_t*)dev->priv)->common.lcn == lcn)
3465 break;
3466 return dev;
3467}
3468
3469/*
3470 * Initiate connection on the logical channel.
3471 * o for PVC we just get channel configuration
3472 * o for SVCs place an X.25 call
3473 *
3474 * Return: 0 connected
3475 * >0 connection in progress
3476 * <0 failure
3477 */
3478
3479static int chan_connect(struct net_device* dev)
3480{
3481 x25_channel_t* chan = dev->priv;
3482 sdla_t* card = chan->card;
3483
3484 if (chan->common.svc && chan->common.usedby == WANPIPE){
3485 if (!chan->addr[0]){
3486 printk(KERN_INFO "%s: No Destination Address\n",
3487 card->devname);
3488 return -EINVAL; /* no destination address */
3489 }
3490 printk(KERN_INFO "%s: placing X.25 call to %s ...\n",
3491 card->devname, chan->addr);
3492
3493 if (x25_place_call(card, chan) != CMD_OK)
3494 return -EIO;
3495
3496 set_chan_state(dev, WAN_CONNECTING);
3497 return 1;
3498 }else{
3499 if (x25_get_chan_conf(card, chan) != CMD_OK)
3500 return -EIO;
3501
3502 set_chan_state(dev, WAN_CONNECTED);
3503 }
3504 return 0;
3505}
3506
3507/*
3508 * Disconnect logical channel.
3509 * o if SVC then clear X.25 call
3510 */
3511
3512static int chan_disc(struct net_device* dev)
3513{
3514 x25_channel_t* chan = dev->priv;
3515
3516 if (chan->common.svc){
3517 x25_clear_call(chan->card, chan->common.lcn, 0, 0);
3518
3519 /* For API we disconnect on clear
3520 * confirmation.
3521 */
3522 if (chan->common.usedby == API)
3523 return 0;
3524 }
3525
3526 set_chan_state(dev, WAN_DISCONNECTED);
3527
3528 return 0;
3529}
3530
3531/*
3532 * Set logical channel state.
3533 */
3534
3535static void set_chan_state(struct net_device* dev, int state)
3536{
3537 x25_channel_t* chan = dev->priv;
3538 sdla_t* card = chan->card;
3539 unsigned long flags;
3540
3541 save_flags(flags);
3542 cli();
3543 if (chan->common.state != state)
3544 {
3545 switch (state)
3546 {
3547 case WAN_CONNECTED:
3548 if (card->u.x.logging){
3549 printk (KERN_INFO
3550 "%s: interface %s connected, lcn %i !\n",
3551 card->devname, dev->name,chan->common.lcn);
3552 }
3553 *(unsigned short*)dev->dev_addr = htons(chan->common.lcn);
3554 chan->i_timeout_sofar = jiffies;
3555
3556 /* LAPB is PVC Based */
3557 if (card->u.x.LAPB_hdlc)
3558 chan->common.svc=0;
3559 break;
3560
3561 case WAN_CONNECTING:
3562 if (card->u.x.logging){
3563 printk (KERN_INFO
3564 "%s: interface %s connecting, lcn %i ...\n",
3565 card->devname, dev->name, chan->common.lcn);
3566 }
3567 break;
3568
3569 case WAN_DISCONNECTED:
3570 if (card->u.x.logging){
3571 printk (KERN_INFO
3572 "%s: interface %s disconnected, lcn %i !\n",
3573 card->devname, dev->name,chan->common.lcn);
3574 }
3575 atomic_set(&chan->common.disconnect,0);
3576
3577 if (chan->common.svc) {
3578 *(unsigned short*)dev->dev_addr = 0;
3579 card->u.x.svc_to_dev_map[(chan->common.lcn%X25_MAX_CHAN)]=NULL;
3580 chan->common.lcn = 0;
3581 }
3582
3583 if (chan->transmit_length){
3584 chan->transmit_length=0;
3585 atomic_set(&chan->common.driver_busy,0);
3586 chan->tx_offset=0;
3587 if (netif_queue_stopped(dev)){
3588 netif_wake_queue(dev);
3589 }
3590 }
3591 atomic_set(&chan->common.command,0);
3592 break;
3593
3594 case WAN_DISCONNECTING:
3595 if (card->u.x.logging){
3596 printk (KERN_INFO
3597 "\n%s: interface %s disconnecting, lcn %i ...\n",
3598 card->devname, dev->name,chan->common.lcn);
3599 }
3600 atomic_set(&chan->common.disconnect,0);
3601 break;
3602 }
3603 chan->common.state = state;
3604 }
3605 chan->state_tick = jiffies;
3606 restore_flags(flags);
3607}
3608
3609/*
3610 * Send packet on a logical channel.
3611 * When this function is called, tx_skb field of the channel data
3612 * space points to the transmit socket buffer. When transmission
3613 * is complete, release socket buffer and reset 'tbusy' flag.
3614 *
3615 * Return: 0 - transmission complete
3616 * 1 - busy
3617 *
3618 * Notes:
3619 * 1. If packet length is greater than MTU for this channel, we'll fragment
3620 * the packet into 'complete sequence' using M-bit.
3621 * 2. When transmission is complete, an event notification should be issued
3622 * to the router.
3623 */
3624
3625static int chan_send(struct net_device* dev, void* buff, unsigned data_len,
3626 unsigned char tx_intr)
3627{
3628 x25_channel_t* chan = dev->priv;
3629 sdla_t* card = chan->card;
3630 TX25Status* status = card->flags;
3631 unsigned len=0, qdm=0, res=0, orig_len = 0;
3632 void *data;
3633
3634 /* Check to see if channel is ready */
3635 if ((!(status->cflags[chan->ch_idx] & 0x40) && !card->u.x.LAPB_hdlc) ||
3636 !(*card->u.x.hdlc_buf_status & 0x40)){
3637
3638 if (!tx_intr){
3639 setup_for_delayed_transmit (dev, buff, data_len);
3640 return 0;
3641 }else{
3642 /* By returning 0 to tx_intr the packet will be dropped */
3643 ++card->wandev.stats.tx_dropped;
3644 ++chan->ifstats.tx_dropped;
3645 printk(KERN_INFO "%s: ERROR, Tx intr could not send, dropping %s:\n",
3646 card->devname,dev->name);
3647 ++chan->if_send_stat.if_send_bfr_not_passed_to_adptr;
3648 return 0;
3649 }
3650 }
3651
3652 if (chan->common.usedby == API){
3653 /* Remove the API Header */
3654 x25api_hdr_t *api_data = (x25api_hdr_t *)buff;
3655
3656 /* Set the qdm bits from the packet header
3657 * User has the option to set the qdm bits
3658 */
3659 qdm = api_data->qdm;
3660
3661 orig_len = len = data_len - sizeof(x25api_hdr_t);
3662 data = (unsigned char*)buff + sizeof(x25api_hdr_t);
3663 }else{
3664 data = buff;
3665 orig_len = len = data_len;
3666 }
3667
3668 if (tx_intr){
3669 /* We are in tx_intr, minus the tx_offset from
3670 * the total length. The tx_offset part of the
3671 * data has already been sent. Also, move the
3672 * data pointer to proper offset location.
3673 */
3674 len -= chan->tx_offset;
3675 data = (unsigned char*)data + chan->tx_offset;
3676 }
3677
3678 /* Check if the packet length is greater than MTU
3679 * If YES: Cut the len to MTU and set the M bit
3680 */
3681 if (len > chan->tx_pkt_size && !card->u.x.LAPB_hdlc){
3682 len = chan->tx_pkt_size;
3683 qdm |= M_BIT;
3684 }
3685
3686
3687 /* Pass only first three bits of the qdm byte to the send
3688 * routine. In case user sets any other bit which might
3689 * cause errors.
3690 */
3691
3692 switch(x25_send(card, chan->common.lcn, (qdm&0x07), len, data)){
3693 case 0x00: /* success */
3694 chan->i_timeout_sofar = jiffies;
3695
3696 dev->trans_start=jiffies;
3697
3698 if ((qdm & M_BIT) && !card->u.x.LAPB_hdlc){
3699 if (!tx_intr){
3700 /* The M bit was set, which means that part of the
3701 * packet has been sent. Copy the packet into a buffer
3702 * and set the offset to len, so on next tx_inter
3703 * the packet will be sent using the below offset.
3704 */
3705 chan->tx_offset += len;
3706
3707 ++chan->ifstats.tx_packets;
3708 chan->ifstats.tx_bytes += len;
3709
3710 if (chan->tx_offset < orig_len){
3711 setup_for_delayed_transmit (dev, buff, data_len);
3712 }
3713 res=0;
3714 }else{
3715 /* We are already in tx_inter, thus data is already
3716 * in the buffer. Update the offset and wait for
3717 * next tx_intr. We add on to the offset, since data can
3718 * be X number of times larger than max data size.
3719 */
3720 ++chan->ifstats.tx_packets;
3721 chan->ifstats.tx_bytes += len;
3722
3723 ++chan->if_send_stat.if_send_bfr_passed_to_adptr;
3724 chan->tx_offset += len;
3725
3726 /* The user can set the qdm bit as well.
3727 * If the entire packet was sent and qdm is still
3728 * set, than it's the user who has set the M bit. In that,
3729 * case indicate that the packet was send by returning
3730 * 0 and wait for a new packet. Otherwise, wait for next
3731 * tx interrupt to send the rest of the packet */
3732
3733 if (chan->tx_offset < orig_len){
3734 res=1;
3735 }else{
3736 res=0;
3737 }
3738 }
3739 }else{
3740 ++chan->ifstats.tx_packets;
3741 chan->ifstats.tx_bytes += len;
3742 ++chan->if_send_stat.if_send_bfr_passed_to_adptr;
3743 res=0;
3744 }
3745 break;
3746
3747 case 0x33: /* Tx busy */
3748 if (tx_intr){
3749 printk(KERN_INFO "%s: Tx_intr: Big Error dropping packet %s\n",
3750 card->devname,dev->name);
3751 ++chan->ifstats.tx_dropped;
3752 ++card->wandev.stats.tx_dropped;
3753 ++chan->if_send_stat.if_send_bfr_not_passed_to_adptr;
3754 res=0;
3755 }else{
3756 DBG_PRINTK(KERN_INFO
3757 "%s: Send: Big Error should have tx: storring %s\n",
3758 card->devname,dev->name);
3759 setup_for_delayed_transmit (dev, buff, data_len);
3760 res=1;
3761 }
3762 break;
3763
3764 default: /* failure */
3765 ++chan->ifstats.tx_errors;
3766 if (tx_intr){
3767 printk(KERN_INFO "%s: Tx_intr: Failure to send, dropping %s\n",
3768 card->devname,dev->name);
3769 ++chan->ifstats.tx_dropped;
3770 ++card->wandev.stats.tx_dropped;
3771 ++chan->if_send_stat.if_send_bfr_not_passed_to_adptr;
3772 res=0;
3773 }else{
3774 DBG_PRINTK(KERN_INFO "%s: Send: Failure to send !!!, storing %s\n",
3775 card->devname,dev->name);
3776 setup_for_delayed_transmit (dev, buff, data_len);
3777 res=1;
3778 }
3779 break;
3780 }
3781 return res;
3782}
3783
3784
3785/*
3786 * Parse X.25 call request data and fill x25_call_info_t structure.
3787 */
3788
3789static void parse_call_info (unsigned char* str, x25_call_info_t* info)
3790{
3791 memset(info, 0, sizeof(x25_call_info_t));
3792 for (; *str; ++str)
3793 {
3794 int i;
3795 unsigned char ch;
3796
3797 if (*str == '-') switch (str[1]) {
3798
3799 /* Take minus 2 off the maximum size so that
3800 * last byte is 0. This way we can use string
3801 * manipulaton functions on call information.
3802 */
3803
3804 case 'd': /* destination address */
3805 for (i = 0; i < (MAX_X25_ADDR_SIZE-2); ++i){
3806 ch = str[2+i];
3807 if (isspace(ch)) break;
3808 info->dest[i] = ch;
3809 }
3810 break;
3811
3812 case 's': /* source address */
3813 for (i = 0; i < (MAX_X25_ADDR_SIZE-2); ++i){
3814 ch = str[2+i];
3815 if (isspace(ch)) break;
3816 info->src[i] = ch;
3817 }
3818 break;
3819
3820 case 'u': /* user data */
3821 for (i = 0; i < (MAX_X25_DATA_SIZE-2); ++i){
3822 ch = str[2+i];
3823 if (isspace(ch)) break;
3824 info->user[i] = ch;
3825 }
3826 info->nuser = i;
3827 break;
3828
3829 case 'f': /* facilities */
3830 for (i = 0; i < (MAX_X25_FACL_SIZE-2); ++i){
3831 ch = str[2+i];
3832 if (isspace(ch)) break;
3833 info->facil[i] = ch;
3834 }
3835 info->nfacil = i;
3836 break;
3837 }
3838 }
3839}
3840
3841/*
3842 * Convert line speed in bps to a number used by S502 code.
3843 */
3844
3845static unsigned char bps_to_speed_code (unsigned long bps)
3846{
3847 unsigned char number;
3848
3849 if (bps <= 1200) number = 0x01;
3850 else if (bps <= 2400) number = 0x02;
3851 else if (bps <= 4800) number = 0x03;
3852 else if (bps <= 9600) number = 0x04;
3853 else if (bps <= 19200) number = 0x05;
3854 else if (bps <= 38400) number = 0x06;
3855 else if (bps <= 45000) number = 0x07;
3856 else if (bps <= 56000) number = 0x08;
3857 else if (bps <= 64000) number = 0x09;
3858 else if (bps <= 74000) number = 0x0A;
3859 else if (bps <= 112000) number = 0x0B;
3860 else if (bps <= 128000) number = 0x0C;
3861 else number = 0x0D;
3862
3863 return number;
3864}
3865
3866/*
3867 * Convert decimal string to unsigned integer.
3868 * If len != 0 then only 'len' characters of the string are converted.
3869 */
3870
3871static unsigned int dec_to_uint (unsigned char* str, int len)
3872{
3873 unsigned val;
3874
3875 if (!len)
3876 len = strlen(str);
3877
3878 for (val = 0; len && isdigit(*str); ++str, --len)
3879 val = (val * 10) + (*str - (unsigned)'0');
3880
3881 return val;
3882}
3883
3884/*
3885 * Convert hex string to unsigned integer.
3886 * If len != 0 then only 'len' characters of the string are conferted.
3887 */
3888
3889static unsigned int hex_to_uint (unsigned char* str, int len)
3890{
3891 unsigned val, ch;
3892
3893 if (!len)
3894 len = strlen(str);
3895
3896 for (val = 0; len; ++str, --len)
3897 {
3898 ch = *str;
3899 if (isdigit(ch))
3900 val = (val << 4) + (ch - (unsigned)'0');
3901 else if (isxdigit(ch))
3902 val = (val << 4) + ((ch & 0xDF) - (unsigned)'A' + 10);
3903 else break;
3904 }
3905 return val;
3906}
3907
3908
3909static int handle_IPXWAN(unsigned char *sendpacket, char *devname, unsigned char enable_IPX, unsigned long network_number, unsigned short proto)
3910{
3911 int i;
3912
3913 if( proto == ETH_P_IPX) {
3914 /* It's an IPX packet */
3915 if(!enable_IPX) {
3916 /* Return 1 so we don't pass it up the stack. */
3917 return 1;
3918 }
3919 } else {
3920 /* It's not IPX so pass it up the stack.*/
3921 return 0;
3922 }
3923
3924 if( sendpacket[16] == 0x90 &&
3925 sendpacket[17] == 0x04)
3926 {
3927 /* It's IPXWAN */
3928
3929 if( sendpacket[2] == 0x02 &&
3930 sendpacket[34] == 0x00)
3931 {
3932 /* It's a timer request packet */
3933 printk(KERN_INFO "%s: Received IPXWAN Timer Request packet\n",devname);
3934
3935 /* Go through the routing options and answer no to every
3936 * option except Unnumbered RIP/SAP
3937 */
3938 for(i = 41; sendpacket[i] == 0x00; i += 5)
3939 {
3940 /* 0x02 is the option for Unnumbered RIP/SAP */
3941 if( sendpacket[i + 4] != 0x02)
3942 {
3943 sendpacket[i + 1] = 0;
3944 }
3945 }
3946
3947 /* Skip over the extended Node ID option */
3948 if( sendpacket[i] == 0x04 )
3949 {
3950 i += 8;
3951 }
3952
3953 /* We also want to turn off all header compression opt. */
3954 for(; sendpacket[i] == 0x80 ;)
3955 {
3956 sendpacket[i + 1] = 0;
3957 i += (sendpacket[i + 2] << 8) + (sendpacket[i + 3]) + 4;
3958 }
3959
3960 /* Set the packet type to timer response */
3961 sendpacket[34] = 0x01;
3962
3963 printk(KERN_INFO "%s: Sending IPXWAN Timer Response\n",devname);
3964 }
3965 else if( sendpacket[34] == 0x02 )
3966 {
3967 /* This is an information request packet */
3968 printk(KERN_INFO "%s: Received IPXWAN Information Request packet\n",devname);
3969
3970 /* Set the packet type to information response */
3971 sendpacket[34] = 0x03;
3972
3973 /* Set the router name */
3974 sendpacket[51] = 'X';
3975 sendpacket[52] = 'T';
3976 sendpacket[53] = 'P';
3977 sendpacket[54] = 'I';
3978 sendpacket[55] = 'P';
3979 sendpacket[56] = 'E';
3980 sendpacket[57] = '-';
3981 sendpacket[58] = CVHexToAscii(network_number >> 28);
3982 sendpacket[59] = CVHexToAscii((network_number & 0x0F000000)>> 24);
3983 sendpacket[60] = CVHexToAscii((network_number & 0x00F00000)>> 20);
3984 sendpacket[61] = CVHexToAscii((network_number & 0x000F0000)>> 16);
3985 sendpacket[62] = CVHexToAscii((network_number & 0x0000F000)>> 12);
3986 sendpacket[63] = CVHexToAscii((network_number & 0x00000F00)>> 8);
3987 sendpacket[64] = CVHexToAscii((network_number & 0x000000F0)>> 4);
3988 sendpacket[65] = CVHexToAscii(network_number & 0x0000000F);
3989 for(i = 66; i < 99; i+= 1)
3990 {
3991 sendpacket[i] = 0;
3992 }
3993
3994 printk(KERN_INFO "%s: Sending IPXWAN Information Response packet\n",devname);
3995 }
3996 else
3997 {
3998 printk(KERN_INFO "%s: Unknown IPXWAN packet!\n",devname);
3999 return 0;
4000 }
4001
4002 /* Set the WNodeID to our network address */
4003 sendpacket[35] = (unsigned char)(network_number >> 24);
4004 sendpacket[36] = (unsigned char)((network_number & 0x00FF0000) >> 16);
4005 sendpacket[37] = (unsigned char)((network_number & 0x0000FF00) >> 8);
4006 sendpacket[38] = (unsigned char)(network_number & 0x000000FF);
4007
4008 return 1;
4009 } else {
4010 /*If we get here it's an IPX-data packet, so it'll get passed up the stack.
4011 */
4012 /* switch the network numbers */
4013 switch_net_numbers(sendpacket, network_number, 1);
4014 return 0;
4015 }
4016}
4017
4018/*
4019 * If incoming is 0 (outgoing)- if the net numbers is ours make it 0
4020 * if incoming is 1 - if the net number is 0 make it ours
4021 */
4022
4023static void switch_net_numbers(unsigned char *sendpacket, unsigned long network_number, unsigned char incoming)
4024{
4025 unsigned long pnetwork_number;
4026
4027 pnetwork_number = (unsigned long)((sendpacket[6] << 24) +
4028 (sendpacket[7] << 16) + (sendpacket[8] << 8) +
4029 sendpacket[9]);
4030
4031
4032 if (!incoming) {
4033 /*If the destination network number is ours, make it 0 */
4034 if( pnetwork_number == network_number) {
4035 sendpacket[6] = sendpacket[7] = sendpacket[8] =
4036 sendpacket[9] = 0x00;
4037 }
4038 } else {
4039 /* If the incoming network is 0, make it ours */
4040 if( pnetwork_number == 0) {
4041 sendpacket[6] = (unsigned char)(network_number >> 24);
4042 sendpacket[7] = (unsigned char)((network_number &
4043 0x00FF0000) >> 16);
4044 sendpacket[8] = (unsigned char)((network_number &
4045 0x0000FF00) >> 8);
4046 sendpacket[9] = (unsigned char)(network_number &
4047 0x000000FF);
4048 }
4049 }
4050
4051
4052 pnetwork_number = (unsigned long)((sendpacket[18] << 24) +
4053 (sendpacket[19] << 16) + (sendpacket[20] << 8) +
4054 sendpacket[21]);
4055
4056
4057 if( !incoming ) {
4058 /* If the source network is ours, make it 0 */
4059 if( pnetwork_number == network_number) {
4060 sendpacket[18] = sendpacket[19] = sendpacket[20] =
4061 sendpacket[21] = 0x00;
4062 }
4063 } else {
4064 /* If the source network is 0, make it ours */
4065 if( pnetwork_number == 0 ) {
4066 sendpacket[18] = (unsigned char)(network_number >> 24);
4067 sendpacket[19] = (unsigned char)((network_number &
4068 0x00FF0000) >> 16);
4069 sendpacket[20] = (unsigned char)((network_number &
4070 0x0000FF00) >> 8);
4071 sendpacket[21] = (unsigned char)(network_number &
4072 0x000000FF);
4073 }
4074 }
4075} /* switch_net_numbers */
4076
4077
4078
4079
4080/********************* X25API SPECIFIC FUNCTIONS ****************/
4081
4082
4083/*===============================================================
4084 * find_channel
4085 *
4086 * Manages the lcn to device map. It increases performance
4087 * because it eliminates the need to search through the link
4088 * list for a device which is bounded to a specific lcn.
4089 *
4090 *===============================================================*/
4091
4092
4093struct net_device *find_channel(sdla_t *card, unsigned lcn)
4094{
4095 if (card->u.x.LAPB_hdlc){
4096
4097 return card->wandev.dev;
4098
4099 }else{
4100 /* We don't know whether the incoming lcn
4101 * is a PVC or an SVC channel. But we do know that
4102 * the lcn cannot be for both the PVC and the SVC
4103 * channel.
4104
4105 * If the lcn number is greater or equal to 255,
4106 * take the modulo 255 of that number. We only have
4107 * 255 locations, thus higher numbers must be mapped
4108 * to a number between 0 and 245.
4109
4110 * We must separate pvc's and svc's since two don't
4111 * have to be contiguous. Meaning pvc's can start
4112 * from 1 to 10 and svc's can start from 256 to 266.
4113 * But 256%255 is 1, i.e. CONFLICT.
4114 */
4115
4116
4117 /* Highest LCN number must be less or equal to 4096 */
4118 if ((lcn <= MAX_LCN_NUM) && (lcn > 0)){
4119
4120 if (lcn < X25_MAX_CHAN){
4121 if (card->u.x.svc_to_dev_map[lcn])
4122 return card->u.x.svc_to_dev_map[lcn];
4123
4124 if (card->u.x.pvc_to_dev_map[lcn])
4125 return card->u.x.pvc_to_dev_map[lcn];
4126
4127 }else{
4128 int new_lcn = lcn%X25_MAX_CHAN;
4129 if (card->u.x.svc_to_dev_map[new_lcn])
4130 return card->u.x.svc_to_dev_map[new_lcn];
4131
4132 if (card->u.x.pvc_to_dev_map[new_lcn])
4133 return card->u.x.pvc_to_dev_map[new_lcn];
4134 }
4135 }
4136 return NULL;
4137 }
4138}
4139
4140void bind_lcn_to_dev(sdla_t *card, struct net_device *dev, unsigned lcn)
4141{
4142 x25_channel_t *chan = dev->priv;
4143
4144 /* Modulo the lcn number by X25_MAX_CHAN (255)
4145 * because the lcn number can be greater than 255
4146 *
4147 * We need to split svc and pvc since they don't have
4148 * to be contigous.
4149 */
4150
4151 if (chan->common.svc){
4152 card->u.x.svc_to_dev_map[(lcn % X25_MAX_CHAN)] = dev;
4153 }else{
4154 card->u.x.pvc_to_dev_map[(lcn % X25_MAX_CHAN)] = dev;
4155 }
4156 chan->common.lcn = lcn;
4157}
4158
4159
4160
4161/*===============================================================
4162 * x25api_bh
4163 *
4164 *
4165 *==============================================================*/
4166
4167static void x25api_bh(struct net_device* dev)
4168{
4169 x25_channel_t* chan = dev->priv;
4170 sdla_t* card = chan->card;
4171 struct sk_buff *skb;
4172
4173 if (atomic_read(&chan->bh_buff_used) == 0){
4174 printk(KERN_INFO "%s: BH Buffer Empty in BH\n",
4175 card->devname);
4176 clear_bit(0, &chan->tq_working);
4177 return;
4178 }
4179
4180 while (atomic_read(&chan->bh_buff_used)){
4181
4182 /* If the sock is in the process of unlinking the
4183 * driver from the socket, we must get out.
4184 * This never happends but is a sanity check. */
4185 if (test_bit(0,&chan->common.common_critical)){
4186 clear_bit(0, &chan->tq_working);
4187 return;
4188 }
4189
4190 /* If LAPB HDLC, do not drop packets if socket is
4191 * not connected. Let the buffer fill up and
4192 * turn off rx interrupt */
4193 if (card->u.x.LAPB_hdlc){
4194 if (chan->common.sk == NULL || chan->common.func == NULL){
4195 clear_bit(0, &chan->tq_working);
4196 return;
4197 }
4198 }
4199
4200 skb = ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb;
4201
4202 if (skb == NULL){
4203 printk(KERN_INFO "%s: BH Skb empty for read %i\n",
4204 card->devname,chan->bh_read);
4205 }else{
4206
4207 if (chan->common.sk == NULL || chan->common.func == NULL){
4208 printk(KERN_INFO "%s: BH: Socket disconnected, dropping\n",
4209 card->devname);
4210 dev_kfree_skb_any(skb);
4211 x25api_bh_cleanup(dev);
4212 ++chan->ifstats.rx_dropped;
4213 ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack;
4214 continue;
4215 }
4216
4217
4218 if (chan->common.func(skb,dev,chan->common.sk) != 0){
4219 /* Sock full cannot send, queue us for another
4220 * try
4221 */
4222 printk(KERN_INFO "%s: BH: !!! Packet failed to send !!!!! \n",
4223 card->devname);
4224 atomic_set(&chan->common.receive_block,1);
4225 return;
4226 }else{
4227 x25api_bh_cleanup(dev);
4228 ++chan->rx_intr_stat.rx_intr_bfr_passed_to_stack;
4229 }
4230 }
4231 }
4232 clear_bit(0, &chan->tq_working);
4233
4234 return;
4235}
4236
4237/*===============================================================
4238 * x25api_bh_cleanup
4239 *
4240 *
4241 *==============================================================*/
4242
4243static int x25api_bh_cleanup(struct net_device *dev)
4244{
4245 x25_channel_t* chan = dev->priv;
4246 sdla_t *card = chan->card;
4247 TX25Status* status = card->flags;
4248
4249
4250 ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb = NULL;
4251
4252 if (chan->bh_read == MAX_BH_BUFF){
4253 chan->bh_read=0;
4254 }else{
4255 ++chan->bh_read;
4256 }
4257
4258 /* If the Receive interrupt was off, it means
4259 * that we filled up our circular buffer. Check
4260 * that we have space in the buffer. If so
4261 * turn the RX interrupt back on.
4262 */
4263 if (!(status->imask & INTR_ON_RX_FRAME)){
4264 if (atomic_read(&chan->bh_buff_used) < (MAX_BH_BUFF+1)){
4265 printk(KERN_INFO "%s: BH: Turning on the interrupt\n",
4266 card->devname);
4267 status->imask |= INTR_ON_RX_FRAME;
4268 }
4269 }
4270
4271 atomic_dec(&chan->bh_buff_used);
4272 return 0;
4273}
4274
4275
4276/*===============================================================
4277 * bh_enqueue
4278 *
4279 *
4280 *==============================================================*/
4281
4282static int bh_enqueue(struct net_device *dev, struct sk_buff *skb)
4283{
4284 x25_channel_t* chan = dev->priv;
4285 sdla_t *card = chan->card;
4286 TX25Status* status = card->flags;
4287
4288 if (atomic_read(&chan->bh_buff_used) == (MAX_BH_BUFF+1)){
4289 printk(KERN_INFO "%s: Bottom half buffer FULL\n",
4290 card->devname);
4291 return 1;
4292 }
4293
4294 ((bh_data_t *)&chan->bh_head[chan->bh_write])->skb = skb;
4295
4296 if (chan->bh_write == MAX_BH_BUFF){
4297 chan->bh_write=0;
4298 }else{
4299 ++chan->bh_write;
4300 }
4301
4302 atomic_inc(&chan->bh_buff_used);
4303
4304 if (atomic_read(&chan->bh_buff_used) == (MAX_BH_BUFF+1)){
4305 printk(KERN_INFO "%s: Buffer is now full, Turning off RX Intr\n",
4306 card->devname);
4307 status->imask &= ~INTR_ON_RX_FRAME;
4308 }
4309
4310 return 0;
4311}
4312
4313
4314/*===============================================================
4315 * timer_intr_cmd_exec
4316 *
4317 * Called by timer interrupt to execute a command
4318 *===============================================================*/
4319
4320static int timer_intr_cmd_exec (sdla_t* card)
4321{
4322 struct net_device *dev;
4323 unsigned char more_to_exec=0;
4324 volatile x25_channel_t *chan=NULL;
4325 int i=0,bad_cmd=0,err=0;
4326
4327 if (card->u.x.cmd_dev == NULL){
4328 card->u.x.cmd_dev = card->wandev.dev;
4329 }
4330
4331 dev = card->u.x.cmd_dev;
4332
4333 for (;;){
4334
4335 chan = dev->priv;
4336
4337 if (atomic_read(&chan->common.command)){
4338
4339 bad_cmd = check_bad_command(card,dev);
4340
4341 if ((!chan->common.mbox || atomic_read(&chan->common.disconnect)) &&
4342 !bad_cmd){
4343
4344 /* Socket has died or exited, We must bring the
4345 * channel down before anybody else tries to
4346 * use it */
4347 err = channel_disconnect(card,dev);
4348 }else{
4349 err = execute_delayed_cmd(card, dev,
4350 (mbox_cmd_t*)chan->common.mbox,
4351 bad_cmd);
4352 }
4353
4354 switch (err){
4355
4356 case RETURN_RESULT:
4357
4358 /* Return the result to the socket without
4359 * delay. NO_WAIT Command */
4360 atomic_set(&chan->common.command,0);
4361 if (atomic_read(&card->u.x.command_busy))
4362 atomic_set(&card->u.x.command_busy,0);
4363
4364 send_delayed_cmd_result(card,dev,card->mbox);
4365
4366 more_to_exec=0;
4367 break;
4368 case DELAY_RESULT:
4369
4370 /* Wait for the remote to respond, before
4371 * sending the result up to the socket.
4372 * WAIT command */
4373 if (atomic_read(&card->u.x.command_busy))
4374 atomic_set(&card->u.x.command_busy,0);
4375
4376 atomic_set(&chan->common.command,0);
4377 more_to_exec=0;
4378 break;
4379 default:
4380
4381 /* If command could not be executed for
4382 * some reason (i.e return code 0x33 busy)
4383 * set the more_to_exec bit which will
4384 * indicate that this command must be exectued
4385 * again during next timer interrupt
4386 */
4387 more_to_exec=1;
4388 if (atomic_read(&card->u.x.command_busy) == 0)
4389 atomic_set(&card->u.x.command_busy,1);
4390 break;
4391 }
4392
4393 bad_cmd=0;
4394
4395 /* If flags is set, there are no hdlc buffers,
4396 * thus, wait for the next pass and try the
4397 * same command again. Otherwise, start searching
4398 * from next device on the next pass.
4399 */
4400 if (!more_to_exec){
4401 dev = move_dev_to_next(card,dev);
4402 }
4403 break;
4404 }else{
4405 /* This device has nothing to execute,
4406 * go to next.
4407 */
4408 if (atomic_read(&card->u.x.command_busy))
4409 atomic_set(&card->u.x.command_busy,0);
4410 dev = move_dev_to_next(card,dev);
4411 }
4412
4413 if (++i == card->u.x.no_dev){
4414 if (!more_to_exec){
4415 DBG_PRINTK(KERN_INFO "%s: Nothing to execute in Timer\n",
4416 card->devname);
4417 if (atomic_read(&card->u.x.command_busy)){
4418 atomic_set(&card->u.x.command_busy,0);
4419 }
4420 }
4421 break;
4422 }
4423
4424 } //End of FOR
4425
4426 card->u.x.cmd_dev = dev;
4427
4428 if (more_to_exec){
4429 /* If more commands are pending, do not turn off timer
4430 * interrupt */
4431 return 1;
4432 }else{
4433 /* No more commands, turn off timer interrupt */
4434 return 0;
4435 }
4436}
4437
4438/*===============================================================
4439 * execute_delayed_cmd
4440 *
4441 * Execute an API command which was passed down from the
4442 * sock. Sock is very limited in which commands it can
4443 * execute. Wait and No Wait commands are supported.
4444 * Place Call, Clear Call and Reset wait commands, where
4445 * Accept Call is a no_wait command.
4446 *
4447 *===============================================================*/
4448
4449static int execute_delayed_cmd(sdla_t* card, struct net_device *dev,
4450 mbox_cmd_t *usr_cmd, char bad_cmd)
4451{
4452 TX25Mbox* mbox = card->mbox;
4453 int err;
4454 x25_channel_t *chan = dev->priv;
4455 int delay=RETURN_RESULT;
4456
4457 if (!(*card->u.x.hdlc_buf_status & 0x40) && !bad_cmd){
4458 return TRY_CMD_AGAIN;
4459 }
4460
4461 /* This way a command is guaranteed to be executed for
4462 * a specific lcn, the network interface is bound to. */
4463 usr_cmd->cmd.lcn = chan->common.lcn;
4464
4465
4466 /* If channel is pvc, instead of place call
4467 * run x25_channel configuration. If running LAPB HDLC
4468 * enable communications.
4469 */
4470 if ((!chan->common.svc) && (usr_cmd->cmd.command == X25_PLACE_CALL)){
4471
4472 if (card->u.x.LAPB_hdlc){
4473 DBG_PRINTK(KERN_INFO "LAPB: Connecting\n");
4474 connect(card);
4475 set_chan_state(dev,WAN_CONNECTING);
4476 return DELAY_RESULT;
4477 }else{
4478 DBG_PRINTK(KERN_INFO "%s: PVC is CONNECTING\n",card->devname);
4479 if (x25_get_chan_conf(card, chan) == CMD_OK){
4480 set_chan_state(dev, WAN_CONNECTED);
4481 }else{
4482 set_chan_state(dev, WAN_DISCONNECTED);
4483 }
4484 return RETURN_RESULT;
4485 }
4486 }
4487
4488 /* Copy the socket mbox command onto the board */
4489
4490 memcpy(&mbox->cmd, &usr_cmd->cmd, sizeof(TX25Cmd));
4491 if (usr_cmd->cmd.length){
4492 memcpy(mbox->data, usr_cmd->data, usr_cmd->cmd.length);
4493 }
4494
4495 /* Check if command is bad. We need to copy the cmd into
4496 * the buffer regardless since we return the, mbox to
4497 * the user */
4498 if (bad_cmd){
4499 mbox->cmd.result=0x01;
4500 return RETURN_RESULT;
4501 }
4502
4503 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
4504
4505 if (err != CMD_OK && err != X25RES_NOT_READY)
4506 x25_error(card, err, usr_cmd->cmd.command, usr_cmd->cmd.lcn);
4507
4508 if (mbox->cmd.result == X25RES_NOT_READY){
4509 return TRY_CMD_AGAIN;
4510 }
4511
4512 switch (mbox->cmd.command){
4513
4514 case X25_PLACE_CALL:
4515
4516 switch (mbox->cmd.result){
4517
4518 case CMD_OK:
4519
4520 /* Check if Place call is a wait command or a
4521 * no wait command */
4522 if (atomic_read(&chan->common.command) & 0x80)
4523 delay=RETURN_RESULT;
4524 else
4525 delay=DELAY_RESULT;
4526
4527
4528 DBG_PRINTK(KERN_INFO "\n%s: PLACE CALL Binding dev %s to lcn %i\n",
4529 card->devname,dev->name, mbox->cmd.lcn);
4530
4531 bind_lcn_to_dev (card, dev, mbox->cmd.lcn);
4532 set_chan_state(dev, WAN_CONNECTING);
4533 break;
4534
4535
4536 default:
4537 delay=RETURN_RESULT;
4538 set_chan_state(dev, WAN_DISCONNECTED);
4539 break;
4540 }
4541 break;
4542
4543 case X25_ACCEPT_CALL:
4544
4545 switch (mbox->cmd.result){
4546
4547 case CMD_OK:
4548
4549 DBG_PRINTK(KERN_INFO "\n%s: ACCEPT Binding dev %s to lcn %i\n",
4550 card->devname,dev->name,mbox->cmd.lcn);
4551
4552 bind_lcn_to_dev (card, dev, mbox->cmd.lcn);
4553
4554 if (x25_get_chan_conf(card, chan) == CMD_OK){
4555
4556 set_chan_state(dev, WAN_CONNECTED);
4557 delay=RETURN_RESULT;
4558
4559 }else{
4560 if (x25_clear_call(card, usr_cmd->cmd.lcn, 0, 0) == CMD_OK){
4561 /* if clear is successful, wait for clear confirm
4562 */
4563 delay=DELAY_RESULT;
4564 }else{
4565 /* Do not change the state here. If we fail
4566 * the accept the return code is send up
4567 *the stack, which will ether retry
4568 * or clear the call
4569 */
4570 DBG_PRINTK(KERN_INFO
4571 "%s: ACCEPT: STATE MAY BE CURRUPTED 2 !!!!!\n",
4572 card->devname);
4573 delay=RETURN_RESULT;
4574 }
4575 }
4576 break;
4577
4578
4579 case X25RES_ASYNC_PACKET:
4580 delay=TRY_CMD_AGAIN;
4581 break;
4582
4583 default:
4584 DBG_PRINTK(KERN_INFO "%s: ACCEPT FAILED\n",card->devname);
4585 if (x25_clear_call(card, usr_cmd->cmd.lcn, 0, 0) == CMD_OK){
4586 delay=DELAY_RESULT;
4587 }else{
4588 /* Do not change the state here. If we fail the accept. The
4589 * return code is send up the stack, which will ether retry
4590 * or clear the call */
4591 DBG_PRINTK(KERN_INFO
4592 "%s: ACCEPT: STATE MAY BE CORRUPTED 1 !!!!!\n",
4593 card->devname);
4594 delay=RETURN_RESULT;
4595 }
4596 }
4597 break;
4598
4599 case X25_CLEAR_CALL:
4600
4601 switch (mbox->cmd.result){
4602
4603 case CMD_OK:
4604 DBG_PRINTK(KERN_INFO
4605 "CALL CLEAR OK: Dev %s Mbox Lcn %i Chan Lcn %i\n",
4606 dev->name,mbox->cmd.lcn,chan->common.lcn);
4607 set_chan_state(dev, WAN_DISCONNECTING);
4608 delay = DELAY_RESULT;
4609 break;
4610
4611 case X25RES_CHANNEL_IN_USE:
4612 case X25RES_ASYNC_PACKET:
4613 delay = TRY_CMD_AGAIN;
4614 break;
4615
4616 case X25RES_LINK_NOT_IN_ABM:
4617 case X25RES_INVAL_LCN:
4618 case X25RES_INVAL_STATE:
4619 set_chan_state(dev, WAN_DISCONNECTED);
4620 delay = RETURN_RESULT;
4621 break;
4622
4623 default:
4624 /* If command did not execute because of user
4625 * fault, do not change the state. This will
4626 * signal the socket that clear command failed.
4627 * User can retry or close the socket.
4628 * When socket gets killed, it will set the
4629 * chan->disconnect which will signal
4630 * driver to clear the call */
4631 printk(KERN_INFO "%s: Clear Command Failed, Rc %x\n",
4632 card->devname,mbox->cmd.command);
4633 delay = RETURN_RESULT;
4634 }
4635 break;
4636 }
4637
4638 return delay;
4639}
4640
4641/*===============================================================
4642 * api_incoming_call
4643 *
4644 * Pass an incoming call request up the listening
4645 * sock. If the API sock is not listening reject the
4646 * call.
4647 *
4648 *===============================================================*/
4649
4650static int api_incoming_call (sdla_t* card, TX25Mbox *mbox, int lcn)
4651{
4652 struct sk_buff *skb;
4653 int len = sizeof(TX25Cmd)+mbox->cmd.length;
4654
4655 if (alloc_and_init_skb_buf(card, &skb, len)){
4656 printk(KERN_INFO "%s: API incoming call, no memory\n",card->devname);
4657 return 1;
4658 }
4659
4660 memcpy(skb_put(skb,len),&mbox->cmd,len);
4661
4662 skb->mac.raw = skb->data;
4663 skb->protocol = htons(X25_PROT);
4664 skb->pkt_type = WAN_PACKET_ASYNC;
4665
4666 if (card->func(skb,card->sk) < 0){
4667 printk(KERN_INFO "%s: MAJOR ERROR: Failed to send up place call \n",card->devname);
4668 dev_kfree_skb_any(skb);
4669 return 1;
4670 }
4671
4672 return 0;
4673}
4674
4675/*===============================================================
4676 * send_delayed_cmd_result
4677 *
4678 * Wait commands like PLEACE CALL or CLEAR CALL must wait
4679 * until the result arrives. This function passes
4680 * the result to a waiting sock.
4681 *
4682 *===============================================================*/
4683static void send_delayed_cmd_result(sdla_t *card, struct net_device *dev,
4684 TX25Mbox* mbox)
4685{
4686 x25_channel_t *chan = dev->priv;
4687 mbox_cmd_t *usr_cmd = (mbox_cmd_t *)chan->common.mbox;
4688 struct sk_buff *skb;
4689 int len=sizeof(unsigned char);
4690
4691 atomic_set(&chan->common.command,0);
4692
4693 /* If the sock is in the process of unlinking the
4694 * driver from the socket, we must get out.
4695 * This never happends but is a sanity check. */
4696 if (test_bit(0,&chan->common.common_critical)){
4697 return;
4698 }
4699
4700 if (!usr_cmd || !chan->common.sk || !chan->common.func){
4701 DBG_PRINTK(KERN_INFO "Delay result: Sock not bounded sk: %u, func: %u, mbox: %u\n",
4702 (unsigned int)chan->common.sk,
4703 (unsigned int)chan->common.func,
4704 (unsigned int)usr_cmd);
4705 return;
4706 }
4707
4708 memcpy(&usr_cmd->cmd, &mbox->cmd, sizeof(TX25Cmd));
4709 if (mbox->cmd.length > 0){
4710 memcpy(usr_cmd->data, mbox->data, mbox->cmd.length);
4711 }
4712
4713 if (alloc_and_init_skb_buf(card,&skb,len)){
4714 printk(KERN_INFO "Delay result: No sock buffers\n");
4715 return;
4716 }
4717
4718 memcpy(skb_put(skb,len),&mbox->cmd.command,len);
4719
4720 skb->mac.raw = skb->data;
4721 skb->pkt_type = WAN_PACKET_CMD;
4722
4723 chan->common.func(skb,dev,chan->common.sk);
4724}
4725
4726/*===============================================================
4727 * clear_confirm_event
4728 *
4729 * Pass the clear confirmation event up the sock. The
4730 * API will disconnect only after the clear confirmation
4731 * has been received.
4732 *
4733 * Depending on the state, clear confirmation could
4734 * be an OOB event, or a result of an API command.
4735 *===============================================================*/
4736
4737static int clear_confirm_event (sdla_t *card, TX25Mbox* mb)
4738{
4739 struct net_device *dev;
4740 x25_channel_t *chan;
4741 unsigned char old_state;
4742
4743 dev = find_channel(card,mb->cmd.lcn);
4744 if (!dev){
4745 DBG_PRINTK(KERN_INFO "%s: *** GOT CLEAR BUT NO DEV %i\n",
4746 card->devname,mb->cmd.lcn);
4747 return 0;
4748 }
4749
4750 chan=dev->priv;
4751 DBG_PRINTK(KERN_INFO "%s: GOT CLEAR CONFIRM %s: Mbox lcn %i Chan lcn %i\n",
4752 card->devname, dev->name, mb->cmd.lcn, chan->common.lcn);
4753
4754 /* If not API fall through to default.
4755 * If API, send the result to a waiting
4756 * socket.
4757 */
4758
4759 old_state = chan->common.state;
4760 set_chan_state(dev, WAN_DISCONNECTED);
4761
4762 if (chan->common.usedby == API){
4763 switch (old_state) {
4764
4765 case WAN_DISCONNECTING:
4766 case WAN_CONNECTING:
4767 send_delayed_cmd_result(card,dev,mb);
4768 break;
4769 case WAN_CONNECTED:
4770 send_oob_msg(card,dev,mb);
4771 break;
4772 }
4773 return 1;
4774 }
4775
4776 return 0;
4777}
4778
4779/*===============================================================
4780 * send_oob_msg
4781 *
4782 * Construct an NEM Message and pass it up the connected
4783 * sock. If the sock is not bounded discard the NEM.
4784 *
4785 *===============================================================*/
4786
4787static void send_oob_msg(sdla_t *card, struct net_device *dev, TX25Mbox *mbox)
4788{
4789 x25_channel_t *chan = dev->priv;
4790 mbox_cmd_t *usr_cmd = (mbox_cmd_t *)chan->common.mbox;
4791 struct sk_buff *skb;
4792 int len=sizeof(x25api_hdr_t)+mbox->cmd.length;
4793 x25api_t *api_hdr;
4794
4795 /* If the sock is in the process of unlinking the
4796 * driver from the socket, we must get out.
4797 * This never happends but is a sanity check. */
4798 if (test_bit(0,&chan->common.common_critical)){
4799 return;
4800 }
4801
4802 if (!usr_cmd || !chan->common.sk || !chan->common.func){
4803 DBG_PRINTK(KERN_INFO "OOB MSG: Sock not bounded\n");
4804 return;
4805 }
4806
4807 memcpy(&usr_cmd->cmd, &mbox->cmd, sizeof(TX25Cmd));
4808 if (mbox->cmd.length > 0){
4809 memcpy(usr_cmd->data, mbox->data, mbox->cmd.length);
4810 }
4811
4812 if (alloc_and_init_skb_buf(card,&skb,len)){
4813 printk(KERN_INFO "%s: OOB MSG: No sock buffers\n",card->devname);
4814 return;
4815 }
4816
4817 api_hdr = (x25api_t*)skb_put(skb,len);
4818 api_hdr->hdr.pktType = mbox->cmd.pktType & 0x7F;
4819 api_hdr->hdr.qdm = mbox->cmd.qdm;
4820 api_hdr->hdr.cause = mbox->cmd.cause;
4821 api_hdr->hdr.diagn = mbox->cmd.diagn;
4822 api_hdr->hdr.length = mbox->cmd.length;
4823 api_hdr->hdr.result = mbox->cmd.result;
4824 api_hdr->hdr.lcn = mbox->cmd.lcn;
4825
4826 if (mbox->cmd.length > 0){
4827 memcpy(api_hdr->data,mbox->data,mbox->cmd.length);
4828 }
4829
4830 skb->mac.raw = skb->data;
4831 skb->pkt_type = WAN_PACKET_ERR;
4832
4833 if (chan->common.func(skb,dev,chan->common.sk) < 0){
4834 if (bh_enqueue(dev,skb)){
4835 printk(KERN_INFO "%s: Dropping OOB MSG\n",card->devname);
4836 dev_kfree_skb_any(skb);
4837 }
4838 }
4839
4840 DBG_PRINTK(KERN_INFO "%s: OOB MSG OK, %s, lcn %i\n",
4841 card->devname, dev->name, mbox->cmd.lcn);
4842}
4843
4844/*===============================================================
4845 * alloc_and_init_skb_buf
4846 *
4847 * Allocate and initialize an skb buffer.
4848 *
4849 *===============================================================*/
4850
4851static int alloc_and_init_skb_buf (sdla_t *card, struct sk_buff **skb, int len)
4852{
4853 struct sk_buff *new_skb = *skb;
4854
4855 new_skb = dev_alloc_skb(len + X25_HRDHDR_SZ);
4856 if (new_skb == NULL){
4857 printk(KERN_INFO "%s: no socket buffers available!\n",
4858 card->devname);
4859 return 1;
4860 }
4861
4862 if (skb_tailroom(new_skb) < len){
4863 /* No room for the packet. Call off the whole thing! */
4864 dev_kfree_skb_any(new_skb);
4865 printk(KERN_INFO "%s: Listen: unexpectedly long packet sequence\n"
4866 ,card->devname);
4867 *skb = NULL;
4868 return 1;
4869 }
4870
4871 *skb = new_skb;
4872 return 0;
4873
4874}
4875
4876/*===============================================================
4877 * api_oob_event
4878 *
4879 * Send an OOB event up to the sock
4880 *
4881 *===============================================================*/
4882
4883static void api_oob_event (sdla_t *card,TX25Mbox *mbox)
4884{
4885 struct net_device *dev = find_channel(card, mbox->cmd.lcn);
4886 x25_channel_t *chan;
4887
4888 if (!dev)
4889 return;
4890
4891 chan=dev->priv;
4892
4893 if (chan->common.usedby == API)
4894 send_oob_msg(card,dev,mbox);
4895
4896}
4897
4898
4899
4900
4901static int channel_disconnect(sdla_t* card, struct net_device *dev)
4902{
4903
4904 int err;
4905 x25_channel_t *chan = dev->priv;
4906
4907 DBG_PRINTK(KERN_INFO "%s: TIMER: %s, Device down disconnecting\n",
4908 card->devname,dev->name);
4909
4910 if (chan->common.svc){
4911 err = x25_clear_call(card,chan->common.lcn,0,0);
4912 }else{
4913 /* If channel is PVC or LAPB HDLC, there is no call
4914 * to be cleared, thus drop down to the default
4915 * area
4916 */
4917 err = 1;
4918 }
4919
4920 switch (err){
4921
4922 case X25RES_CHANNEL_IN_USE:
4923 case X25RES_NOT_READY:
4924 err = TRY_CMD_AGAIN;
4925 break;
4926 case CMD_OK:
4927 DBG_PRINTK(KERN_INFO "CALL CLEAR OK: Dev %s Chan Lcn %i\n",
4928 dev->name,chan->common.lcn);
4929
4930 set_chan_state(dev,WAN_DISCONNECTING);
4931 atomic_set(&chan->common.command,0);
4932 err = DELAY_RESULT;
4933 break;
4934 default:
4935 /* If LAPB HDLC protocol, bring the whole link down
4936 * once the application terminates
4937 */
4938
4939 set_chan_state(dev,WAN_DISCONNECTED);
4940
4941 if (card->u.x.LAPB_hdlc){
4942 DBG_PRINTK(KERN_INFO "LAPB: Disconnecting Link\n");
4943 hdlc_link_down (card);
4944 }
4945 atomic_set(&chan->common.command,0);
4946 err = RETURN_RESULT;
4947 break;
4948 }
4949
4950 return err;
4951}
4952
4953static void hdlc_link_down (sdla_t *card)
4954{
4955 TX25Mbox* mbox = card->mbox;
4956 int retry = 5;
4957 int err=0;
4958
4959 do {
4960 memset(mbox,0,sizeof(TX25Mbox));
4961 mbox->cmd.command = X25_HDLC_LINK_DISC;
4962 mbox->cmd.length = 1;
4963 mbox->data[0]=0;
4964 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
4965
4966 } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_DISC, 0));
4967
4968 if (err)
4969 printk(KERN_INFO "%s: Hdlc Link Down Failed %x\n",card->devname,err);
4970
4971 disconnect (card);
4972
4973}
4974
4975static int check_bad_command(sdla_t* card, struct net_device *dev)
4976{
4977 x25_channel_t *chan = dev->priv;
4978 int bad_cmd = 0;
4979
4980 switch (atomic_read(&chan->common.command)&0x7F){
4981
4982 case X25_PLACE_CALL:
4983 if (chan->common.state != WAN_DISCONNECTED)
4984 bad_cmd=1;
4985 break;
4986 case X25_CLEAR_CALL:
4987 if (chan->common.state == WAN_DISCONNECTED)
4988 bad_cmd=1;
4989 break;
4990 case X25_ACCEPT_CALL:
4991 if (chan->common.state != WAN_CONNECTING)
4992 bad_cmd=1;
4993 break;
4994 case X25_RESET:
4995 if (chan->common.state != WAN_CONNECTED)
4996 bad_cmd=1;
4997 break;
4998 default:
4999 bad_cmd=1;
5000 break;
5001 }
5002
5003 if (bad_cmd){
5004 printk(KERN_INFO "%s: Invalid State, BAD Command %x, dev %s, lcn %i, st %i\n",
5005 card->devname,atomic_read(&chan->common.command),dev->name,
5006 chan->common.lcn, chan->common.state);
5007 }
5008
5009 return bad_cmd;
5010}
5011
5012
5013
5014/*************************** XPIPEMON FUNCTIONS **************************/
5015
5016/*==============================================================================
5017 * Process UDP call of type XPIPE
5018 */
5019
5020static int process_udp_mgmt_pkt(sdla_t *card)
5021{
5022 int c_retry = MAX_CMD_RETRY;
5023 unsigned int len;
5024 struct sk_buff *new_skb;
5025 TX25Mbox *mbox = card->mbox;
5026 int err;
5027 int udp_mgmt_req_valid = 1;
5028 struct net_device *dev;
5029 x25_channel_t *chan;
5030 unsigned short lcn;
5031 struct timeval tv;
5032
5033
5034 x25_udp_pkt_t *x25_udp_pkt;
5035 x25_udp_pkt = (x25_udp_pkt_t *)card->u.x.udp_pkt_data;
5036
5037 dev = card->u.x.udp_dev;
5038 chan = dev->priv;
5039 lcn = chan->common.lcn;
5040
5041 switch(x25_udp_pkt->cblock.command) {
5042
5043 /* XPIPE_ENABLE_TRACE */
5044 case XPIPE_ENABLE_TRACING:
5045
5046 /* XPIPE_GET_TRACE_INFO */
5047 case XPIPE_GET_TRACE_INFO:
5048
5049 /* SET FT1 MODE */
5050 case XPIPE_SET_FT1_MODE:
5051
5052 if(card->u.x.udp_pkt_src == UDP_PKT_FRM_NETWORK) {
5053 ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_direction_err;
5054 udp_mgmt_req_valid = 0;
5055 break;
5056 }
5057
5058 /* XPIPE_FT1_READ_STATUS */
5059 case XPIPE_FT1_READ_STATUS:
5060
5061 /* FT1 MONITOR STATUS */
5062 case XPIPE_FT1_STATUS_CTRL:
5063 if(card->hw.fwid != SFID_X25_508) {
5064 ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_type_err;
5065 udp_mgmt_req_valid = 0;
5066 break;
5067 }
5068 default:
5069 break;
5070 }
5071
5072 if(!udp_mgmt_req_valid) {
5073 /* set length to 0 */
5074 x25_udp_pkt->cblock.length = 0;
5075 /* set return code */
5076 x25_udp_pkt->cblock.result = (card->hw.fwid != SFID_X25_508) ? 0x1F : 0xCD;
5077
5078 } else {
5079
5080 switch (x25_udp_pkt->cblock.command) {
5081
5082
5083 case XPIPE_FLUSH_DRIVER_STATS:
5084 init_x25_channel_struct(chan);
5085 init_global_statistics(card);
5086 mbox->cmd.length = 0;
5087 break;
5088
5089
5090 case XPIPE_DRIVER_STAT_IFSEND:
5091 memcpy(x25_udp_pkt->data, &chan->if_send_stat, sizeof(if_send_stat_t));
5092 mbox->cmd.length = sizeof(if_send_stat_t);
5093 x25_udp_pkt->cblock.length = mbox->cmd.length;
5094 break;
5095
5096 case XPIPE_DRIVER_STAT_INTR:
5097 memcpy(&x25_udp_pkt->data[0], &card->statistics, sizeof(global_stats_t));
5098 memcpy(&x25_udp_pkt->data[sizeof(global_stats_t)],
5099 &chan->rx_intr_stat, sizeof(rx_intr_stat_t));
5100
5101 mbox->cmd.length = sizeof(global_stats_t) +
5102 sizeof(rx_intr_stat_t);
5103 x25_udp_pkt->cblock.length = mbox->cmd.length;
5104 break;
5105
5106 case XPIPE_DRIVER_STAT_GEN:
5107 memcpy(x25_udp_pkt->data,
5108 &chan->pipe_mgmt_stat.UDP_PIPE_mgmt_kmalloc_err,
5109 sizeof(pipe_mgmt_stat_t));
5110
5111 memcpy(&x25_udp_pkt->data[sizeof(pipe_mgmt_stat_t)],
5112 &card->statistics, sizeof(global_stats_t));
5113
5114 x25_udp_pkt->cblock.result = 0;
5115 x25_udp_pkt->cblock.length = sizeof(global_stats_t)+
5116 sizeof(rx_intr_stat_t);
5117 mbox->cmd.length = x25_udp_pkt->cblock.length;
5118 break;
5119
5120 case XPIPE_ROUTER_UP_TIME:
5121 do_gettimeofday(&tv);
5122 chan->router_up_time = tv.tv_sec - chan->router_start_time;
5123 *(unsigned long *)&x25_udp_pkt->data = chan->router_up_time;
5124 x25_udp_pkt->cblock.length = mbox->cmd.length = 4;
5125 x25_udp_pkt->cblock.result = 0;
5126 break;
5127
5128 default :
5129
5130 do {
5131 memcpy(&mbox->cmd, &x25_udp_pkt->cblock.command, sizeof(TX25Cmd));
5132 if(mbox->cmd.length){
5133 memcpy(&mbox->data,
5134 (char *)x25_udp_pkt->data,
5135 mbox->cmd.length);
5136 }
5137
5138 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
5139 } while (err && c_retry-- && x25_error(card, err, mbox->cmd.command, 0));
5140
5141
5142 if ( err == CMD_OK ||
5143 (err == 1 &&
5144 (mbox->cmd.command == 0x06 ||
5145 mbox->cmd.command == 0x16) ) ){
5146
5147 ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_cmnd_OK;
5148 } else {
5149 ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_cmnd_timeout;
5150 }
5151
5152 /* copy the result back to our buffer */
5153 memcpy(&x25_udp_pkt->cblock.command, &mbox->cmd, sizeof(TX25Cmd));
5154
5155 if(mbox->cmd.length) {
5156 memcpy(&x25_udp_pkt->data, &mbox->data, mbox->cmd.length);
5157 }
5158 break;
5159
5160 } //switch
5161
5162 }
5163
5164 /* Fill UDP TTL */
5165
5166 x25_udp_pkt->ip_pkt.ttl = card->wandev.ttl;
5167 len = reply_udp(card->u.x.udp_pkt_data, mbox->cmd.length);
5168
5169
5170 if(card->u.x.udp_pkt_src == UDP_PKT_FRM_NETWORK) {
5171
5172 err = x25_send(card, lcn, 0, len, card->u.x.udp_pkt_data);
5173 if (!err)
5174 ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_send_passed;
5175 else
5176 ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_send_failed;
5177
5178 } else {
5179
5180 /* Allocate socket buffer */
5181 if((new_skb = dev_alloc_skb(len)) != NULL) {
5182 void *buf;
5183
5184 /* copy data into new_skb */
5185 buf = skb_put(new_skb, len);
5186 memcpy(buf, card->u.x.udp_pkt_data, len);
5187
5188 /* Decapsulate packet and pass it up the protocol
5189 stack */
5190 new_skb->dev = dev;
5191
5192 if (chan->common.usedby == API)
5193 new_skb->protocol = htons(X25_PROT);
5194 else
5195 new_skb->protocol = htons(ETH_P_IP);
5196
5197 new_skb->mac.raw = new_skb->data;
5198
5199 netif_rx(new_skb);
5200 ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_passed_to_stack;
5201
5202 } else {
5203 ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_no_socket;
5204 printk(KERN_INFO
5205 "%s: UDP mgmt cmnd, no socket buffers available!\n",
5206 card->devname);
5207 }
5208 }
5209
5210 card->u.x.udp_pkt_lgth = 0;
5211
5212 return 1;
5213}
5214
5215
5216/*==============================================================================
5217 * Determine what type of UDP call it is. DRVSTATS or XPIPE8ND ?
5218 */
5219static int udp_pkt_type( struct sk_buff *skb, sdla_t* card )
5220{
5221 x25_udp_pkt_t *x25_udp_pkt = (x25_udp_pkt_t *)skb->data;
5222
5223 if((x25_udp_pkt->ip_pkt.protocol == UDPMGMT_UDP_PROTOCOL) &&
5224 (x25_udp_pkt->ip_pkt.ver_inet_hdr_length == 0x45) &&
5225 (x25_udp_pkt->udp_pkt.udp_dst_port == ntohs(card->wandev.udp_port)) &&
5226 (x25_udp_pkt->wp_mgmt.request_reply == UDPMGMT_REQUEST)) {
5227
5228 if(!strncmp(x25_udp_pkt->wp_mgmt.signature,
5229 UDPMGMT_XPIPE_SIGNATURE, 8)){
5230 return UDP_XPIPE_TYPE;
5231 }else{
5232 printk(KERN_INFO "%s: UDP Packet, Failed Signature !\n",
5233 card->devname);
5234 }
5235 }
5236
5237 return UDP_INVALID_TYPE;
5238}
5239
5240
5241/*============================================================================
5242 * Reply to UDP Management system.
5243 * Return nothing.
5244 */
5245static int reply_udp( unsigned char *data, unsigned int mbox_len )
5246{
5247 unsigned short len, udp_length, temp, ip_length;
5248 unsigned long ip_temp;
5249 int even_bound = 0;
5250
5251
5252 x25_udp_pkt_t *x25_udp_pkt = (x25_udp_pkt_t *)data;
5253
5254 /* Set length of packet */
5255 len = sizeof(ip_pkt_t)+
5256 sizeof(udp_pkt_t)+
5257 sizeof(wp_mgmt_t)+
5258 sizeof(cblock_t)+
5259 mbox_len;
5260
5261
5262 /* fill in UDP reply */
5263 x25_udp_pkt->wp_mgmt.request_reply = UDPMGMT_REPLY;
5264
5265 /* fill in UDP length */
5266 udp_length = sizeof(udp_pkt_t)+
5267 sizeof(wp_mgmt_t)+
5268 sizeof(cblock_t)+
5269 mbox_len;
5270
5271
5272 /* put it on an even boundary */
5273 if ( udp_length & 0x0001 ) {
5274 udp_length += 1;
5275 len += 1;
5276 even_bound = 1;
5277 }
5278
5279 temp = (udp_length<<8)|(udp_length>>8);
5280 x25_udp_pkt->udp_pkt.udp_length = temp;
5281
5282 /* swap UDP ports */
5283 temp = x25_udp_pkt->udp_pkt.udp_src_port;
5284 x25_udp_pkt->udp_pkt.udp_src_port =
5285 x25_udp_pkt->udp_pkt.udp_dst_port;
5286 x25_udp_pkt->udp_pkt.udp_dst_port = temp;
5287
5288
5289
5290 /* add UDP pseudo header */
5291 temp = 0x1100;
5292 *((unsigned short *)
5293 (x25_udp_pkt->data+mbox_len+even_bound)) = temp;
5294 temp = (udp_length<<8)|(udp_length>>8);
5295 *((unsigned short *)
5296 (x25_udp_pkt->data+mbox_len+even_bound+2)) = temp;
5297
5298 /* calculate UDP checksum */
5299 x25_udp_pkt->udp_pkt.udp_checksum = 0;
5300
5301 x25_udp_pkt->udp_pkt.udp_checksum =
5302 calc_checksum(&data[UDP_OFFSET], udp_length+UDP_OFFSET);
5303
5304 /* fill in IP length */
5305 ip_length = len;
5306 temp = (ip_length<<8)|(ip_length>>8);
5307 x25_udp_pkt->ip_pkt.total_length = temp;
5308
5309 /* swap IP addresses */
5310 ip_temp = x25_udp_pkt->ip_pkt.ip_src_address;
5311 x25_udp_pkt->ip_pkt.ip_src_address =
5312 x25_udp_pkt->ip_pkt.ip_dst_address;
5313 x25_udp_pkt->ip_pkt.ip_dst_address = ip_temp;
5314
5315
5316 /* fill in IP checksum */
5317 x25_udp_pkt->ip_pkt.hdr_checksum = 0;
5318 x25_udp_pkt->ip_pkt.hdr_checksum = calc_checksum(data, sizeof(ip_pkt_t));
5319
5320 return len;
5321} /* reply_udp */
5322
5323unsigned short calc_checksum (char *data, int len)
5324{
5325 unsigned short temp;
5326 unsigned long sum=0;
5327 int i;
5328
5329 for( i = 0; i <len; i+=2 ) {
5330 memcpy(&temp,&data[i],2);
5331 sum += (unsigned long)temp;
5332 }
5333
5334 while (sum >> 16 ) {
5335 sum = (sum & 0xffffUL) + (sum >> 16);
5336 }
5337
5338 temp = (unsigned short)sum;
5339 temp = ~temp;
5340
5341 if( temp == 0 )
5342 temp = 0xffff;
5343
5344 return temp;
5345}
5346
5347/*=============================================================================
5348 * Store a UDP management packet for later processing.
5349 */
5350
5351static int store_udp_mgmt_pkt(int udp_type, char udp_pkt_src, sdla_t* card,
5352 struct net_device *dev, struct sk_buff *skb,
5353 int lcn)
5354{
5355 int udp_pkt_stored = 0;
5356
5357 if(!card->u.x.udp_pkt_lgth && (skb->len <= MAX_LGTH_UDP_MGNT_PKT)){
5358 card->u.x.udp_pkt_lgth = skb->len;
5359 card->u.x.udp_type = udp_type;
5360 card->u.x.udp_pkt_src = udp_pkt_src;
5361 card->u.x.udp_lcn = lcn;
5362 card->u.x.udp_dev = dev;
5363 memcpy(card->u.x.udp_pkt_data, skb->data, skb->len);
5364 card->u.x.timer_int_enabled |= TMR_INT_ENABLED_UDP_PKT;
5365 udp_pkt_stored = 1;
5366
5367 }else{
5368 printk(KERN_INFO "%s: ERROR: UDP packet not stored for LCN %d\n",
5369 card->devname,lcn);
5370 }
5371
5372 if(udp_pkt_src == UDP_PKT_FRM_STACK){
5373 dev_kfree_skb_any(skb);
5374 }else{
5375 dev_kfree_skb_any(skb);
5376 }
5377
5378 return(udp_pkt_stored);
5379}
5380
5381
5382
5383/*=============================================================================
5384 * Initial the ppp_private_area structure.
5385 */
5386static void init_x25_channel_struct( x25_channel_t *chan )
5387{
5388 memset(&chan->if_send_stat.if_send_entry,0,sizeof(if_send_stat_t));
5389 memset(&chan->rx_intr_stat.rx_intr_no_socket,0,sizeof(rx_intr_stat_t));
5390 memset(&chan->pipe_mgmt_stat.UDP_PIPE_mgmt_kmalloc_err,0,sizeof(pipe_mgmt_stat_t));
5391}
5392
5393/*============================================================================
5394 * Initialize Global Statistics
5395 */
5396static void init_global_statistics( sdla_t *card )
5397{
5398 memset(&card->statistics.isr_entry,0,sizeof(global_stats_t));
5399}
5400
5401
5402/*===============================================================
5403 * SMP Support
5404 * ==============================================================*/
5405
5406static void S508_S514_lock(sdla_t *card, unsigned long *smp_flags)
5407{
5408 spin_lock_irqsave(&card->wandev.lock, *smp_flags);
5409}
5410static void S508_S514_unlock(sdla_t *card, unsigned long *smp_flags)
5411{
5412 spin_unlock_irqrestore(&card->wandev.lock, *smp_flags);
5413}
5414
5415/*===============================================================
5416 * x25_timer_routine
5417 *
5418 * A more efficient polling routine. Each half a second
5419 * queue a polling task. We want to do the polling in a
5420 * task not timer, because timer runs in interrupt time.
5421 *
5422 * FIXME Polling should be rethinked.
5423 *==============================================================*/
5424
5425static void x25_timer_routine(unsigned long data)
5426{
5427 sdla_t *card = (sdla_t*)data;
5428
5429 if (!card->wandev.dev){
5430 printk(KERN_INFO "%s: Stopping the X25 Poll Timer: No Dev.\n",
5431 card->devname);
5432 return;
5433 }
5434
5435 if (card->open_cnt != card->u.x.num_of_ch){
5436 printk(KERN_INFO "%s: Stopping the X25 Poll Timer: Interface down.\n",
5437 card->devname);
5438 return;
5439 }
5440
5441 if (test_bit(PERI_CRIT,&card->wandev.critical)){
5442 printk(KERN_INFO "%s: Stopping the X25 Poll Timer: Shutting down.\n",
5443 card->devname);
5444 return;
5445 }
5446
5447 if (!test_and_set_bit(POLL_CRIT,&card->wandev.critical)){
5448 trigger_x25_poll(card);
5449 }
5450
5451 card->u.x.x25_timer.expires=jiffies+(HZ>>1);
5452 add_timer(&card->u.x.x25_timer);
5453 return;
5454}
5455
5456void disable_comm_shutdown(sdla_t *card)
5457{
5458 TX25Mbox* mbox = card->mbox;
5459 int err;
5460
5461 /* Turn of interrutps */
5462 mbox->data[0] = 0;
5463 if (card->hw.fwid == SFID_X25_508){
5464 mbox->data[1] = card->hw.irq;
5465 mbox->data[2] = 2;
5466 mbox->cmd.length = 3;
5467 }else {
5468 mbox->cmd.length = 1;
5469 }
5470 mbox->cmd.command = X25_SET_INTERRUPT_MODE;
5471 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
5472 if (err)
5473 printk(KERN_INFO "INTERRUPT OFF FAIED %x\n",err);
5474
5475 /* Bring down HDLC */
5476 mbox->cmd.command = X25_HDLC_LINK_CLOSE;
5477 mbox->cmd.length = 0;
5478 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
5479 if (err)
5480 printk(KERN_INFO "LINK CLOSED FAILED %x\n",err);
5481
5482
5483 /* Brind down DTR */
5484 mbox->data[0] = 0;
5485 mbox->data[2] = 0;
5486 mbox->data[1] = 0x01;
5487 mbox->cmd.length = 3;
5488 mbox->cmd.command = X25_SET_GLOBAL_VARS;
5489 err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT;
5490 if (err)
5491 printk(KERN_INFO "DTR DOWN FAILED %x\n",err);
5492
5493}
5494
5495MODULE_LICENSE("GPL");
5496
5497/****** End *****************************************************************/
diff --git a/drivers/net/wan/sdladrv.c b/drivers/net/wan/sdladrv.c
deleted file mode 100644
index 032c0f81928e..000000000000
--- a/drivers/net/wan/sdladrv.c
+++ /dev/null
@@ -1,2314 +0,0 @@
1/*****************************************************************************
2* sdladrv.c SDLA Support Module. Main module.
3*
4* This module is a library of common hardware-specific functions
5* used by all Sangoma drivers.
6*
7* Author: Gideon Hack
8*
9* Copyright: (c) 1995-2000 Sangoma Technologies Inc.
10*
11* This program is free software; you can redistribute it and/or
12* modify it under the terms of the GNU General Public License
13* as published by the Free Software Foundation; either version
14* 2 of the License, or (at your option) any later version.
15* ============================================================================
16* Mar 20, 2001 Nenad Corbic Added the auto_pci_cfg filed, to support
17* the PCISLOT #0.
18* Apr 04, 2000 Nenad Corbic Fixed the auto memory detection code.
19* The memory test at address 0xC8000.
20* Mar 09, 2000 Nenad Corbic Added Gideon's Bug Fix: clear pci
21* interrupt flags on initial load.
22* Jun 02, 1999 Gideon Hack Added support for the S514 adapter.
23* Updates for Linux 2.2.X kernels.
24* Sep 17, 1998 Jaspreet Singh Updates for linux 2.2.X kernels
25* Dec 20, 1996 Gene Kozin Version 3.0.0. Complete overhaul.
26* Jul 12, 1996 Gene Kozin Changes for Linux 2.0 compatibility.
27* Jun 12, 1996 Gene Kozin Added support for S503 card.
28* Apr 30, 1996 Gene Kozin SDLA hardware interrupt is acknowledged before
29* calling protocolspecific ISR.
30* Register I/O ports with Linux kernel.
31* Miscellaneous bug fixes.
32* Dec 20, 1995 Gene Kozin Fixed a bug in interrupt routine.
33* Oct 14, 1995 Gene Kozin Initial version.
34*****************************************************************************/
35
36/*****************************************************************************
37 * Notes:
38 * ------
39 * 1. This code is ment to be system-independent (as much as possible). To
40 * achive this, various macros are used to hide system-specific interfaces.
41 * To compile this code, one of the following constants must be defined:
42 *
43 * Platform Define
44 * -------- ------
45 * Linux _LINUX_
46 * SCO Unix _SCO_UNIX_
47 *
48 * 2. Supported adapter types:
49 *
50 * S502A
51 * ES502A (S502E)
52 * S503
53 * S507
54 * S508 (S509)
55 *
56 * 3. S502A Notes:
57 *
58 * There is no separate DPM window enable/disable control in S502A. It
59 * opens immediately after a window number it written to the HMCR
60 * register. To close the window, HMCR has to be written a value
61 * ????1111b (e.g. 0x0F or 0xFF).
62 *
63 * S502A DPM window cannot be located at offset E000 (e.g. 0xAE000).
64 *
65 * There should be a delay of ??? before reading back S502A status
66 * register.
67 *
68 * 4. S502E Notes:
69 *
70 * S502E has a h/w bug: although default IRQ line state is HIGH, enabling
71 * interrupts by setting bit 1 of the control register (BASE) to '1'
72 * causes it to go LOW! Therefore, disabling interrupts by setting that
73 * bit to '0' causes low-to-high transition on IRQ line (ghosty
74 * interrupt). The same occurs when disabling CPU by resetting bit 0 of
75 * CPU control register (BASE+3) - see the next note.
76 *
77 * S502E CPU and DPM control is limited:
78 *
79 * o CPU cannot be stopped independently. Resetting bit 0 of the CPUi
80 * control register (BASE+3) shuts the board down entirely, including
81 * DPM;
82 *
83 * o DPM access cannot be controlled dynamically. Ones CPU is started,
84 * bit 1 of the control register (BASE) is used to enable/disable IRQ,
85 * so that access to shared memory cannot be disabled while CPU is
86 * running.
87 ****************************************************************************/
88
89#define _LINUX_
90
91#if defined(_LINUX_) /****** Linux *******************************/
92
93#include <linux/config.h>
94#include <linux/kernel.h> /* printk(), and other useful stuff */
95#include <linux/stddef.h> /* offsetof(), etc. */
96#include <linux/errno.h> /* return codes */
97#include <linux/string.h> /* inline memset(), etc. */
98#include <linux/module.h> /* support for loadable modules */
99#include <linux/jiffies.h> /* for jiffies, HZ, etc. */
100#include <linux/sdladrv.h> /* API definitions */
101#include <linux/sdlasfm.h> /* SDLA firmware module definitions */
102#include <linux/sdlapci.h> /* SDLA PCI hardware definitions */
103#include <linux/pci.h> /* PCI defines and function prototypes */
104#include <asm/io.h> /* for inb(), outb(), etc. */
105
106#define _INB(port) (inb(port))
107#define _OUTB(port, byte) (outb((byte),(port)))
108#define SYSTEM_TICK jiffies
109
110#include <linux/init.h>
111
112
113#elif defined(_SCO_UNIX_) /****** SCO Unix ****************************/
114
115#if !defined(INKERNEL)
116#error This code MUST be compiled in kernel mode!
117#endif
118#include <sys/sdladrv.h> /* API definitions */
119#include <sys/sdlasfm.h> /* SDLA firmware module definitions */
120#include <sys/inline.h> /* for inb(), outb(), etc. */
121#define _INB(port) (inb(port))
122#define _OUTB(port, byte) (outb((port),(byte)))
123#define SYSTEM_TICK lbolt
124
125#else
126#error Unknown system type!
127#endif
128
129#define MOD_VERSION 3
130#define MOD_RELEASE 0
131
132#define SDLA_IODELAY 100 /* I/O Rd/Wr delay, 10 works for 486DX2-66 */
133#define EXEC_DELAY 20 /* shared memory access delay, mks */
134#define EXEC_TIMEOUT (HZ*2) /* command timeout, in ticks */
135
136/* I/O port address range */
137#define S502A_IORANGE 3
138#define S502E_IORANGE 4
139#define S503_IORANGE 3
140#define S507_IORANGE 4
141#define S508_IORANGE 4
142
143/* Maximum amount of memory */
144#define S502_MAXMEM 0x10000L
145#define S503_MAXMEM 0x10000L
146#define S507_MAXMEM 0x40000L
147#define S508_MAXMEM 0x40000L
148
149/* Minimum amount of memory */
150#define S502_MINMEM 0x8000L
151#define S503_MINMEM 0x8000L
152#define S507_MINMEM 0x20000L
153#define S508_MINMEM 0x20000L
154#define NO_PORT -1
155
156
157
158
159
160/****** Function Prototypes *************************************************/
161
162/* Hardware-specific functions */
163static int sdla_detect (sdlahw_t* hw);
164static int sdla_autodpm (sdlahw_t* hw);
165static int sdla_setdpm (sdlahw_t* hw);
166static int sdla_load (sdlahw_t* hw, sfm_t* sfm, unsigned len);
167static int sdla_init (sdlahw_t* hw);
168static unsigned long sdla_memtest (sdlahw_t* hw);
169static int sdla_bootcfg (sdlahw_t* hw, sfm_info_t* sfminfo);
170static unsigned char make_config_byte (sdlahw_t* hw);
171static int sdla_start (sdlahw_t* hw, unsigned addr);
172
173static int init_s502a (sdlahw_t* hw);
174static int init_s502e (sdlahw_t* hw);
175static int init_s503 (sdlahw_t* hw);
176static int init_s507 (sdlahw_t* hw);
177static int init_s508 (sdlahw_t* hw);
178
179static int detect_s502a (int port);
180static int detect_s502e (int port);
181static int detect_s503 (int port);
182static int detect_s507 (int port);
183static int detect_s508 (int port);
184static int detect_s514 (sdlahw_t* hw);
185static int find_s514_adapter(sdlahw_t* hw, char find_first_S514_card);
186
187/* Miscellaneous functions */
188static void peek_by_4 (unsigned long src, void* buf, unsigned len);
189static void poke_by_4 (unsigned long dest, void* buf, unsigned len);
190static int calibrate_delay (int mks);
191static int get_option_index (unsigned* optlist, unsigned optval);
192static unsigned check_memregion (void* ptr, unsigned len);
193static unsigned test_memregion (void* ptr, unsigned len);
194static unsigned short checksum (unsigned char* buf, unsigned len);
195static int init_pci_slot(sdlahw_t *);
196
197static int pci_probe(sdlahw_t *hw);
198
199/****** Global Data **********************************************************
200 * Note: All data must be explicitly initialized!!!
201 */
202
203static struct pci_device_id sdladrv_pci_tbl[] = {
204 { V3_VENDOR_ID, V3_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, },
205 { } /* Terminating entry */
206};
207MODULE_DEVICE_TABLE(pci, sdladrv_pci_tbl);
208
209MODULE_LICENSE("GPL");
210
211/* private data */
212static char modname[] = "sdladrv";
213static char fullname[] = "SDLA Support Module";
214static char copyright[] = "(c) 1995-1999 Sangoma Technologies Inc.";
215static unsigned exec_idle;
216
217/* Hardware configuration options.
218 * These are arrays of configuration options used by verification routines.
219 * The first element of each array is its size (i.e. number of options).
220 */
221static unsigned s502_port_options[] =
222 { 4, 0x250, 0x300, 0x350, 0x360 }
223;
224static unsigned s503_port_options[] =
225 { 8, 0x250, 0x254, 0x300, 0x304, 0x350, 0x354, 0x360, 0x364 }
226;
227static unsigned s508_port_options[] =
228 { 8, 0x250, 0x270, 0x280, 0x300, 0x350, 0x360, 0x380, 0x390 }
229;
230
231static unsigned s502a_irq_options[] = { 0 };
232static unsigned s502e_irq_options[] = { 4, 2, 3, 5, 7 };
233static unsigned s503_irq_options[] = { 5, 2, 3, 4, 5, 7 };
234static unsigned s508_irq_options[] = { 8, 3, 4, 5, 7, 10, 11, 12, 15 };
235
236static unsigned s502a_dpmbase_options[] =
237{
238 28,
239 0xA0000, 0xA2000, 0xA4000, 0xA6000, 0xA8000, 0xAA000, 0xAC000,
240 0xC0000, 0xC2000, 0xC4000, 0xC6000, 0xC8000, 0xCA000, 0xCC000,
241 0xD0000, 0xD2000, 0xD4000, 0xD6000, 0xD8000, 0xDA000, 0xDC000,
242 0xE0000, 0xE2000, 0xE4000, 0xE6000, 0xE8000, 0xEA000, 0xEC000,
243};
244static unsigned s507_dpmbase_options[] =
245{
246 32,
247 0xA0000, 0xA2000, 0xA4000, 0xA6000, 0xA8000, 0xAA000, 0xAC000, 0xAE000,
248 0xB0000, 0xB2000, 0xB4000, 0xB6000, 0xB8000, 0xBA000, 0xBC000, 0xBE000,
249 0xC0000, 0xC2000, 0xC4000, 0xC6000, 0xC8000, 0xCA000, 0xCC000, 0xCE000,
250 0xE0000, 0xE2000, 0xE4000, 0xE6000, 0xE8000, 0xEA000, 0xEC000, 0xEE000,
251};
252static unsigned s508_dpmbase_options[] = /* incl. S502E and S503 */
253{
254 32,
255 0xA0000, 0xA2000, 0xA4000, 0xA6000, 0xA8000, 0xAA000, 0xAC000, 0xAE000,
256 0xC0000, 0xC2000, 0xC4000, 0xC6000, 0xC8000, 0xCA000, 0xCC000, 0xCE000,
257 0xD0000, 0xD2000, 0xD4000, 0xD6000, 0xD8000, 0xDA000, 0xDC000, 0xDE000,
258 0xE0000, 0xE2000, 0xE4000, 0xE6000, 0xE8000, 0xEA000, 0xEC000, 0xEE000,
259};
260
261/*
262static unsigned s502_dpmsize_options[] = { 2, 0x2000, 0x10000 };
263static unsigned s507_dpmsize_options[] = { 2, 0x2000, 0x4000 };
264static unsigned s508_dpmsize_options[] = { 1, 0x2000 };
265*/
266
267static unsigned s502a_pclk_options[] = { 2, 3600, 7200 };
268static unsigned s502e_pclk_options[] = { 5, 3600, 5000, 7200, 8000, 10000 };
269static unsigned s503_pclk_options[] = { 3, 7200, 8000, 10000 };
270static unsigned s507_pclk_options[] = { 1, 12288 };
271static unsigned s508_pclk_options[] = { 1, 16000 };
272
273/* Host memory control register masks */
274static unsigned char s502a_hmcr[] =
275{
276 0x10, 0x12, 0x14, 0x16, 0x18, 0x1A, 0x1C, /* A0000 - AC000 */
277 0x20, 0x22, 0x24, 0x26, 0x28, 0x2A, 0x2C, /* C0000 - CC000 */
278 0x00, 0x02, 0x04, 0x06, 0x08, 0x0A, 0x0C, /* D0000 - DC000 */
279 0x30, 0x32, 0x34, 0x36, 0x38, 0x3A, 0x3C, /* E0000 - EC000 */
280};
281static unsigned char s502e_hmcr[] =
282{
283 0x10, 0x12, 0x14, 0x16, 0x18, 0x1A, 0x1C, 0x1E, /* A0000 - AE000 */
284 0x20, 0x22, 0x24, 0x26, 0x28, 0x2A, 0x2C, 0x2E, /* C0000 - CE000 */
285 0x00, 0x02, 0x04, 0x06, 0x08, 0x0A, 0x0C, 0x0E, /* D0000 - DE000 */
286 0x30, 0x32, 0x34, 0x36, 0x38, 0x3A, 0x3C, 0x3E, /* E0000 - EE000 */
287};
288static unsigned char s507_hmcr[] =
289{
290 0x00, 0x02, 0x04, 0x06, 0x08, 0x0A, 0x0C, 0x0E, /* A0000 - AE000 */
291 0x40, 0x42, 0x44, 0x46, 0x48, 0x4A, 0x4C, 0x4E, /* B0000 - BE000 */
292 0x80, 0x82, 0x84, 0x86, 0x88, 0x8A, 0x8C, 0x8E, /* C0000 - CE000 */
293 0xC0, 0xC2, 0xC4, 0xC6, 0xC8, 0xCA, 0xCC, 0xCE, /* E0000 - EE000 */
294};
295static unsigned char s508_hmcr[] =
296{
297 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, /* A0000 - AE000 */
298 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, /* C0000 - CE000 */
299 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, /* D0000 - DE000 */
300 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F, /* E0000 - EE000 */
301};
302
303static unsigned char s507_irqmask[] =
304{
305 0x00, 0x20, 0x40, 0x60, 0x80, 0xA0, 0xC0, 0xE0
306};
307
308static int pci_slot_ar[MAX_S514_CARDS];
309
310/******* Kernel Loadable Module Entry Points ********************************/
311
312/*============================================================================
313 * Module 'insert' entry point.
314 * o print announcement
315 * o initialize static data
316 * o calibrate SDLA shared memory access delay.
317 *
318 * Return: 0 Ok
319 * < 0 error.
320 * Context: process
321 */
322
323static int __init sdladrv_init(void)
324{
325 int i=0;
326
327 printk(KERN_INFO "%s v%u.%u %s\n",
328 fullname, MOD_VERSION, MOD_RELEASE, copyright);
329 exec_idle = calibrate_delay(EXEC_DELAY);
330#ifdef WANDEBUG
331 printk(KERN_DEBUG "%s: exec_idle = %d\n", modname, exec_idle);
332#endif
333
334 /* Initialize the PCI Card array, which
335 * will store flags, used to mark
336 * card initialization state */
337 for (i=0; i<MAX_S514_CARDS; i++)
338 pci_slot_ar[i] = 0xFF;
339
340 return 0;
341}
342
343/*============================================================================
344 * Module 'remove' entry point.
345 * o release all remaining system resources
346 */
347static void __exit sdladrv_cleanup(void)
348{
349}
350
351module_init(sdladrv_init);
352module_exit(sdladrv_cleanup);
353
354/******* Kernel APIs ********************************************************/
355
356/*============================================================================
357 * Set up adapter.
358 * o detect adapter type
359 * o verify hardware configuration options
360 * o check for hardware conflicts
361 * o set up adapter shared memory
362 * o test adapter memory
363 * o load firmware
364 * Return: 0 ok.
365 * < 0 error
366 */
367
368EXPORT_SYMBOL(sdla_setup);
369
370int sdla_setup (sdlahw_t* hw, void* sfm, unsigned len)
371{
372 unsigned* irq_opt = NULL; /* IRQ options */
373 unsigned* dpmbase_opt = NULL; /* DPM window base options */
374 unsigned* pclk_opt = NULL; /* CPU clock rate options */
375 int err=0;
376
377 if (sdla_detect(hw)) {
378 if(hw->type != SDLA_S514)
379 printk(KERN_INFO "%s: no SDLA card found at port 0x%X\n",
380 modname, hw->port);
381 return -EINVAL;
382 }
383
384 if(hw->type != SDLA_S514) {
385 printk(KERN_INFO "%s: found S%04u card at port 0x%X.\n",
386 modname, hw->type, hw->port);
387
388 hw->dpmsize = SDLA_WINDOWSIZE;
389 switch (hw->type) {
390 case SDLA_S502A:
391 hw->io_range = S502A_IORANGE;
392 irq_opt = s502a_irq_options;
393 dpmbase_opt = s502a_dpmbase_options;
394 pclk_opt = s502a_pclk_options;
395 break;
396
397 case SDLA_S502E:
398 hw->io_range = S502E_IORANGE;
399 irq_opt = s502e_irq_options;
400 dpmbase_opt = s508_dpmbase_options;
401 pclk_opt = s502e_pclk_options;
402 break;
403
404 case SDLA_S503:
405 hw->io_range = S503_IORANGE;
406 irq_opt = s503_irq_options;
407 dpmbase_opt = s508_dpmbase_options;
408 pclk_opt = s503_pclk_options;
409 break;
410
411 case SDLA_S507:
412 hw->io_range = S507_IORANGE;
413 irq_opt = s508_irq_options;
414 dpmbase_opt = s507_dpmbase_options;
415 pclk_opt = s507_pclk_options;
416 break;
417
418 case SDLA_S508:
419 hw->io_range = S508_IORANGE;
420 irq_opt = s508_irq_options;
421 dpmbase_opt = s508_dpmbase_options;
422 pclk_opt = s508_pclk_options;
423 break;
424 }
425
426 /* Verify IRQ configuration options */
427 if (!get_option_index(irq_opt, hw->irq)) {
428 printk(KERN_INFO "%s: IRQ %d is invalid!\n",
429 modname, hw->irq);
430 return -EINVAL;
431 }
432
433 /* Verify CPU clock rate configuration options */
434 if (hw->pclk == 0)
435 hw->pclk = pclk_opt[1]; /* use default */
436
437 else if (!get_option_index(pclk_opt, hw->pclk)) {
438 printk(KERN_INFO "%s: CPU clock %u is invalid!\n",
439 modname, hw->pclk);
440 return -EINVAL;
441 }
442 printk(KERN_INFO "%s: assuming CPU clock rate of %u kHz.\n",
443 modname, hw->pclk);
444
445 /* Setup adapter dual-port memory window and test memory */
446 if (hw->dpmbase == 0) {
447 err = sdla_autodpm(hw);
448 if (err) {
449 printk(KERN_INFO
450 "%s: can't find available memory region!\n",
451 modname);
452 return err;
453 }
454 }
455 else if (!get_option_index(dpmbase_opt,
456 virt_to_phys(hw->dpmbase))) {
457 printk(KERN_INFO
458 "%s: memory address 0x%lX is invalid!\n",
459 modname, virt_to_phys(hw->dpmbase));
460 return -EINVAL;
461 }
462 else if (sdla_setdpm(hw)) {
463 printk(KERN_INFO
464 "%s: 8K memory region at 0x%lX is not available!\n",
465 modname, virt_to_phys(hw->dpmbase));
466 return -EINVAL;
467 }
468 printk(KERN_INFO
469 "%s: dual-port memory window is set at 0x%lX.\n",
470 modname, virt_to_phys(hw->dpmbase));
471
472
473 /* If we find memory in 0xE**** Memory region,
474 * warn the user to disable the SHADOW RAM.
475 * Since memory corruption can occur if SHADOW is
476 * enabled. This can causes random crashes ! */
477 if (virt_to_phys(hw->dpmbase) >= 0xE0000){
478 printk(KERN_WARNING "\n%s: !!!!!!!! WARNING !!!!!!!!\n",modname);
479 printk(KERN_WARNING "%s: WANPIPE is using 0x%lX memory region !!!\n",
480 modname, virt_to_phys(hw->dpmbase));
481 printk(KERN_WARNING " Please disable the SHADOW RAM, otherwise\n");
482 printk(KERN_WARNING " your system might crash randomly from time to time !\n");
483 printk(KERN_WARNING "%s: !!!!!!!! WARNING !!!!!!!!\n\n",modname);
484 }
485 }
486
487 else {
488 hw->memory = test_memregion((void*)hw->dpmbase,
489 MAX_SIZEOF_S514_MEMORY);
490 if(hw->memory < (256 * 1024)) {
491 printk(KERN_INFO
492 "%s: error in testing S514 memory (0x%lX)\n",
493 modname, hw->memory);
494 sdla_down(hw);
495 return -EINVAL;
496 }
497 }
498
499 printk(KERN_INFO "%s: found %luK bytes of on-board memory\n",
500 modname, hw->memory / 1024);
501
502 /* Load firmware. If loader fails then shut down adapter */
503 err = sdla_load(hw, sfm, len);
504 if (err) sdla_down(hw); /* shutdown adapter */
505
506 return err;
507}
508
509/*============================================================================
510 * Shut down SDLA: disable shared memory access and interrupts, stop CPU, etc.
511 */
512
513EXPORT_SYMBOL(sdla_down);
514
515int sdla_down (sdlahw_t* hw)
516{
517 unsigned port = hw->port;
518 int i;
519 unsigned char CPU_no;
520 u32 int_config, int_status;
521
522 if(!port && (hw->type != SDLA_S514))
523 return -EFAULT;
524
525 switch (hw->type) {
526 case SDLA_S502A:
527 _OUTB(port, 0x08); /* halt CPU */
528 _OUTB(port, 0x08);
529 _OUTB(port, 0x08);
530 hw->regs[0] = 0x08;
531 _OUTB(port + 1, 0xFF); /* close memory window */
532 hw->regs[1] = 0xFF;
533 break;
534
535 case SDLA_S502E:
536 _OUTB(port + 3, 0); /* stop CPU */
537 _OUTB(port, 0); /* reset board */
538 for (i = 0; i < S502E_IORANGE; ++i)
539 hw->regs[i] = 0
540 ;
541 break;
542
543 case SDLA_S503:
544 case SDLA_S507:
545 case SDLA_S508:
546 _OUTB(port, 0); /* reset board logic */
547 hw->regs[0] = 0;
548 break;
549
550 case SDLA_S514:
551 /* halt the adapter */
552 *(char *)hw->vector = S514_CPU_HALT;
553 CPU_no = hw->S514_cpu_no[0];
554
555 /* disable the PCI IRQ and disable memory access */
556 pci_read_config_dword(hw->pci_dev, PCI_INT_CONFIG, &int_config);
557 int_config &= (CPU_no == S514_CPU_A) ? ~PCI_DISABLE_IRQ_CPU_A : ~PCI_DISABLE_IRQ_CPU_B;
558 pci_write_config_dword(hw->pci_dev, PCI_INT_CONFIG, int_config);
559 read_S514_int_stat(hw, &int_status);
560 S514_intack(hw, int_status);
561 if(CPU_no == S514_CPU_A)
562 pci_write_config_dword(hw->pci_dev, PCI_MAP0_DWORD,
563 PCI_CPU_A_MEM_DISABLE);
564 else
565 pci_write_config_dword(hw->pci_dev, PCI_MAP1_DWORD,
566 PCI_CPU_B_MEM_DISABLE);
567
568 /* free up the allocated virtual memory */
569 iounmap((void *)hw->dpmbase);
570 iounmap((void *)hw->vector);
571 break;
572
573
574 default:
575 return -EINVAL;
576 }
577 return 0;
578}
579
580/*============================================================================
581 * Map shared memory window into SDLA address space.
582 */
583
584EXPORT_SYMBOL(sdla_mapmem);
585
586int sdla_mapmem (sdlahw_t* hw, unsigned long addr)
587{
588 unsigned port = hw->port;
589 register int tmp;
590
591 switch (hw->type) {
592 case SDLA_S502A:
593 case SDLA_S502E:
594 if (addr < S502_MAXMEM) { /* verify parameter */
595 tmp = addr >> 13; /* convert to register mask */
596 _OUTB(port + 2, tmp);
597 hw->regs[2] = tmp;
598 }
599 else return -EINVAL;
600 break;
601
602 case SDLA_S503:
603 if (addr < S503_MAXMEM) { /* verify parameter */
604 tmp = (hw->regs[0] & 0x8F) | ((addr >> 9) & 0x70);
605 _OUTB(port, tmp);
606 hw->regs[0] = tmp;
607 }
608 else return -EINVAL;
609 break;
610
611 case SDLA_S507:
612 if (addr < S507_MAXMEM) {
613 if (!(_INB(port) & 0x02))
614 return -EIO;
615 tmp = addr >> 13; /* convert to register mask */
616 _OUTB(port + 2, tmp);
617 hw->regs[2] = tmp;
618 }
619 else return -EINVAL;
620 break;
621
622 case SDLA_S508:
623 if (addr < S508_MAXMEM) {
624 tmp = addr >> 13; /* convert to register mask */
625 _OUTB(port + 2, tmp);
626 hw->regs[2] = tmp;
627 }
628 else return -EINVAL;
629 break;
630
631 case SDLA_S514:
632 return 0;
633
634 default:
635 return -EINVAL;
636 }
637 hw->vector = addr & 0xFFFFE000L;
638 return 0;
639}
640
641/*============================================================================
642 * Enable interrupt generation.
643 */
644
645static int sdla_inten (sdlahw_t* hw)
646{
647 unsigned port = hw->port;
648 int tmp, i;
649
650 switch (hw->type) {
651 case SDLA_S502E:
652 /* Note thar interrupt control operations on S502E are allowed
653 * only if CPU is enabled (bit 0 of status register is set).
654 */
655 if (_INB(port) & 0x01) {
656 _OUTB(port, 0x02); /* bit1 = 1, bit2 = 0 */
657 _OUTB(port, 0x06); /* bit1 = 1, bit2 = 1 */
658 hw->regs[0] = 0x06;
659 }
660 else return -EIO;
661 break;
662
663 case SDLA_S503:
664 tmp = hw->regs[0] | 0x04;
665 _OUTB(port, tmp);
666 hw->regs[0] = tmp; /* update mirror */
667 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
668 if (!(_INB(port) & 0x02)) /* verify */
669 return -EIO;
670 break;
671
672 case SDLA_S508:
673 tmp = hw->regs[0] | 0x10;
674 _OUTB(port, tmp);
675 hw->regs[0] = tmp; /* update mirror */
676 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
677 if (!(_INB(port + 1) & 0x10)) /* verify */
678 return -EIO;
679 break;
680
681 case SDLA_S502A:
682 case SDLA_S507:
683 break;
684
685 case SDLA_S514:
686 break;
687
688 default:
689 return -EINVAL;
690
691 }
692 return 0;
693}
694
695/*============================================================================
696 * Disable interrupt generation.
697 */
698
699#if 0
700int sdla_intde (sdlahw_t* hw)
701{
702 unsigned port = hw->port;
703 int tmp, i;
704
705 switch (hw->type) {
706 case SDLA_S502E:
707 /* Notes:
708 * 1) interrupt control operations are allowed only if CPU is
709 * enabled (bit 0 of status register is set).
710 * 2) disabling interrupts using bit 1 of control register
711 * causes IRQ line go high, therefore we are going to use
712 * 0x04 instead: lower it to inhibit interrupts to PC.
713 */
714 if (_INB(port) & 0x01) {
715 _OUTB(port, hw->regs[0] & ~0x04);
716 hw->regs[0] &= ~0x04;
717 }
718 else return -EIO;
719 break;
720
721 case SDLA_S503:
722 tmp = hw->regs[0] & ~0x04;
723 _OUTB(port, tmp);
724 hw->regs[0] = tmp; /* update mirror */
725 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
726 if (_INB(port) & 0x02) /* verify */
727 return -EIO;
728 break;
729
730 case SDLA_S508:
731 tmp = hw->regs[0] & ~0x10;
732 _OUTB(port, tmp);
733 hw->regs[0] = tmp; /* update mirror */
734 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
735 if (_INB(port) & 0x10) /* verify */
736 return -EIO;
737 break;
738
739 case SDLA_S502A:
740 case SDLA_S507:
741 break;
742
743 default:
744 return -EINVAL;
745 }
746 return 0;
747}
748#endif /* 0 */
749
750/*============================================================================
751 * Acknowledge SDLA hardware interrupt.
752 */
753
754static int sdla_intack (sdlahw_t* hw)
755{
756 unsigned port = hw->port;
757 int tmp;
758
759 switch (hw->type) {
760 case SDLA_S502E:
761 /* To acknoledge hardware interrupt we have to toggle bit 3 of
762 * control register: \_/
763 * Note that interrupt control operations on S502E are allowed
764 * only if CPU is enabled (bit 1 of status register is set).
765 */
766 if (_INB(port) & 0x01) {
767 tmp = hw->regs[0] & ~0x04;
768 _OUTB(port, tmp);
769 tmp |= 0x04;
770 _OUTB(port, tmp);
771 hw->regs[0] = tmp;
772 }
773 else return -EIO;
774 break;
775
776 case SDLA_S503:
777 if (_INB(port) & 0x04) {
778 tmp = hw->regs[0] & ~0x08;
779 _OUTB(port, tmp);
780 tmp |= 0x08;
781 _OUTB(port, tmp);
782 hw->regs[0] = tmp;
783 }
784 break;
785
786 case SDLA_S502A:
787 case SDLA_S507:
788 case SDLA_S508:
789 break;
790
791 default:
792 return -EINVAL;
793 }
794 return 0;
795}
796
797
798/*============================================================================
799 * Acknowledge S514 hardware interrupt.
800 */
801
802EXPORT_SYMBOL(S514_intack);
803
804void S514_intack (sdlahw_t* hw, u32 int_status)
805{
806 pci_write_config_dword(hw->pci_dev, PCI_INT_STATUS, int_status);
807}
808
809
810/*============================================================================
811 * Read the S514 hardware interrupt status.
812 */
813
814EXPORT_SYMBOL(read_S514_int_stat);
815
816void read_S514_int_stat (sdlahw_t* hw, u32* int_status)
817{
818 pci_read_config_dword(hw->pci_dev, PCI_INT_STATUS, int_status);
819}
820
821
822/*============================================================================
823 * Generate an interrupt to adapter's CPU.
824 */
825
826#if 0
827int sdla_intr (sdlahw_t* hw)
828{
829 unsigned port = hw->port;
830
831 switch (hw->type) {
832 case SDLA_S502A:
833 if (!(_INB(port) & 0x40)) {
834 _OUTB(port, 0x10); /* issue NMI to CPU */
835 hw->regs[0] = 0x10;
836 }
837 else return -EIO;
838 break;
839
840 case SDLA_S507:
841 if ((_INB(port) & 0x06) == 0x06) {
842 _OUTB(port + 3, 0);
843 }
844 else return -EIO;
845 break;
846
847 case SDLA_S508:
848 if (_INB(port + 1) & 0x02) {
849 _OUTB(port, 0x08);
850 }
851 else return -EIO;
852 break;
853
854 case SDLA_S502E:
855 case SDLA_S503:
856 default:
857 return -EINVAL;
858 }
859 return 0;
860}
861#endif /* 0 */
862
863/*============================================================================
864 * Execute Adapter Command.
865 * o Set exec flag.
866 * o Busy-wait until flag is reset.
867 * o Return number of loops made, or 0 if command timed out.
868 */
869
870EXPORT_SYMBOL(sdla_exec);
871
872int sdla_exec (void* opflag)
873{
874 volatile unsigned char* flag = opflag;
875 unsigned long tstop;
876 int nloops;
877
878 if(readb(flag) != 0x00) {
879 printk(KERN_INFO
880 "WANPIPE: opp flag set on entry to sdla_exec\n");
881 return 0;
882 }
883
884 writeb(0x01, flag);
885
886 tstop = SYSTEM_TICK + EXEC_TIMEOUT;
887
888 for (nloops = 1; (readb(flag) == 0x01); ++ nloops) {
889 unsigned delay = exec_idle;
890 while (-- delay); /* delay */
891 if (SYSTEM_TICK > tstop) return 0; /* time is up! */
892 }
893 return nloops;
894}
895
896/*============================================================================
897 * Read absolute adapter memory.
898 * Transfer data from adapter's memory to data buffer.
899 *
900 * Note:
901 * Care should be taken when crossing dual-port memory window boundary.
902 * This function is not atomic, so caller must disable interrupt if
903 * interrupt routines are accessing adapter shared memory.
904 */
905
906EXPORT_SYMBOL(sdla_peek);
907
908int sdla_peek (sdlahw_t* hw, unsigned long addr, void* buf, unsigned len)
909{
910
911 if (addr + len > hw->memory) /* verify arguments */
912 return -EINVAL;
913
914 if(hw->type == SDLA_S514) { /* copy data for the S514 adapter */
915 peek_by_4 ((unsigned long)hw->dpmbase + addr, buf, len);
916 return 0;
917 }
918
919 else { /* copy data for the S508 adapter */
920 unsigned long oldvec = hw->vector;
921 unsigned winsize = hw->dpmsize;
922 unsigned curpos, curlen; /* current offset and block size */
923 unsigned long curvec; /* current DPM window vector */
924 int err = 0;
925
926 while (len && !err) {
927 curpos = addr % winsize; /* current window offset */
928 curvec = addr - curpos; /* current window vector */
929 curlen = (len > (winsize - curpos)) ?
930 (winsize - curpos) : len;
931 /* Relocate window and copy block of data */
932 err = sdla_mapmem(hw, curvec);
933 peek_by_4 ((unsigned long)hw->dpmbase + curpos, buf,
934 curlen);
935 addr += curlen;
936 buf = (char*)buf + curlen;
937 len -= curlen;
938 }
939
940 /* Restore DPM window position */
941 sdla_mapmem(hw, oldvec);
942 return err;
943 }
944}
945
946
947/*============================================================================
948 * Read data from adapter's memory to a data buffer in 4-byte chunks.
949 * Note that we ensure that the SDLA memory address is on a 4-byte boundary
950 * before we begin moving the data in 4-byte chunks.
951*/
952
953static void peek_by_4 (unsigned long src, void* buf, unsigned len)
954{
955
956 /* byte copy data until we get to a 4-byte boundary */
957 while (len && (src & 0x03)) {
958 *(char *)buf ++ = readb(src ++);
959 len --;
960 }
961
962 /* copy data in 4-byte chunks */
963 while (len >= 4) {
964 *(unsigned long *)buf = readl(src);
965 buf += 4;
966 src += 4;
967 len -= 4;
968 }
969
970 /* byte copy any remaining data */
971 while (len) {
972 *(char *)buf ++ = readb(src ++);
973 len --;
974 }
975}
976
977
978/*============================================================================
979 * Write Absolute Adapter Memory.
980 * Transfer data from data buffer to adapter's memory.
981 *
982 * Note:
983 * Care should be taken when crossing dual-port memory window boundary.
984 * This function is not atomic, so caller must disable interrupt if
985 * interrupt routines are accessing adapter shared memory.
986 */
987
988EXPORT_SYMBOL(sdla_poke);
989
990int sdla_poke (sdlahw_t* hw, unsigned long addr, void* buf, unsigned len)
991{
992
993 if (addr + len > hw->memory) /* verify arguments */
994 return -EINVAL;
995
996 if(hw->type == SDLA_S514) { /* copy data for the S514 adapter */
997 poke_by_4 ((unsigned long)hw->dpmbase + addr, buf, len);
998 return 0;
999 }
1000
1001 else { /* copy data for the S508 adapter */
1002 unsigned long oldvec = hw->vector;
1003 unsigned winsize = hw->dpmsize;
1004 unsigned curpos, curlen; /* current offset and block size */
1005 unsigned long curvec; /* current DPM window vector */
1006 int err = 0;
1007
1008 while (len && !err) {
1009 curpos = addr % winsize; /* current window offset */
1010 curvec = addr - curpos; /* current window vector */
1011 curlen = (len > (winsize - curpos)) ?
1012 (winsize - curpos) : len;
1013 /* Relocate window and copy block of data */
1014 sdla_mapmem(hw, curvec);
1015 poke_by_4 ((unsigned long)hw->dpmbase + curpos, buf,
1016 curlen);
1017 addr += curlen;
1018 buf = (char*)buf + curlen;
1019 len -= curlen;
1020 }
1021
1022 /* Restore DPM window position */
1023 sdla_mapmem(hw, oldvec);
1024 return err;
1025 }
1026}
1027
1028
1029/*============================================================================
1030 * Write from a data buffer to adapter's memory in 4-byte chunks.
1031 * Note that we ensure that the SDLA memory address is on a 4-byte boundary
1032 * before we begin moving the data in 4-byte chunks.
1033*/
1034
1035static void poke_by_4 (unsigned long dest, void* buf, unsigned len)
1036{
1037
1038 /* byte copy data until we get to a 4-byte boundary */
1039 while (len && (dest & 0x03)) {
1040 writeb (*(char *)buf ++, dest ++);
1041 len --;
1042 }
1043
1044 /* copy data in 4-byte chunks */
1045 while (len >= 4) {
1046 writel (*(unsigned long *)buf, dest);
1047 dest += 4;
1048 buf += 4;
1049 len -= 4;
1050 }
1051
1052 /* byte copy any remaining data */
1053 while (len) {
1054 writeb (*(char *)buf ++ , dest ++);
1055 len --;
1056 }
1057}
1058
1059
1060#ifdef DONT_COMPIPLE_THIS
1061#endif /* DONT_COMPIPLE_THIS */
1062
1063/****** Hardware-Specific Functions *****************************************/
1064
1065/*============================================================================
1066 * Detect adapter type.
1067 * o if adapter type is specified then call detection routine for that adapter
1068 * type. Otherwise call detection routines for every adapter types until
1069 * adapter is detected.
1070 *
1071 * Notes:
1072 * 1) Detection tests are destructive! Adapter will be left in shutdown state
1073 * after the test.
1074 */
1075static int sdla_detect (sdlahw_t* hw)
1076{
1077 unsigned port = hw->port;
1078 int err = 0;
1079
1080 if (!port && (hw->type != SDLA_S514))
1081 return -EFAULT;
1082
1083 switch (hw->type) {
1084 case SDLA_S502A:
1085 if (!detect_s502a(port)) err = -ENODEV;
1086 break;
1087
1088 case SDLA_S502E:
1089 if (!detect_s502e(port)) err = -ENODEV;
1090 break;
1091
1092 case SDLA_S503:
1093 if (!detect_s503(port)) err = -ENODEV;
1094 break;
1095
1096 case SDLA_S507:
1097 if (!detect_s507(port)) err = -ENODEV;
1098 break;
1099
1100 case SDLA_S508:
1101 if (!detect_s508(port)) err = -ENODEV;
1102 break;
1103
1104 case SDLA_S514:
1105 if (!detect_s514(hw)) err = -ENODEV;
1106 break;
1107
1108 default:
1109 if (detect_s502a(port))
1110 hw->type = SDLA_S502A;
1111 else if (detect_s502e(port))
1112 hw->type = SDLA_S502E;
1113 else if (detect_s503(port))
1114 hw->type = SDLA_S503;
1115 else if (detect_s507(port))
1116 hw->type = SDLA_S507;
1117 else if (detect_s508(port))
1118 hw->type = SDLA_S508;
1119 else err = -ENODEV;
1120 }
1121 return err;
1122}
1123
1124/*============================================================================
1125 * Autoselect memory region.
1126 * o try all available DMP address options from the top down until success.
1127 */
1128static int sdla_autodpm (sdlahw_t* hw)
1129{
1130 int i, err = -EINVAL;
1131 unsigned* opt;
1132
1133 switch (hw->type) {
1134 case SDLA_S502A:
1135 opt = s502a_dpmbase_options;
1136 break;
1137
1138 case SDLA_S502E:
1139 case SDLA_S503:
1140 case SDLA_S508:
1141 opt = s508_dpmbase_options;
1142 break;
1143
1144 case SDLA_S507:
1145 opt = s507_dpmbase_options;
1146 break;
1147
1148 default:
1149 return -EINVAL;
1150 }
1151
1152 /* Start testing from 8th position, address
1153 * 0xC8000 from the 508 address table.
1154 * We don't want to test A**** addresses, since
1155 * they are usually used for Video */
1156 for (i = 8; i <= opt[0] && err; i++) {
1157 hw->dpmbase = phys_to_virt(opt[i]);
1158 err = sdla_setdpm(hw);
1159 }
1160 return err;
1161}
1162
1163/*============================================================================
1164 * Set up adapter dual-port memory window.
1165 * o shut down adapter
1166 * o make sure that no physical memory exists in this region, i.e entire
1167 * region reads 0xFF and is not writable when adapter is shut down.
1168 * o initialize adapter hardware
1169 * o make sure that region is usable with SDLA card, i.e. we can write to it
1170 * when adapter is configured.
1171 */
1172static int sdla_setdpm (sdlahw_t* hw)
1173{
1174 int err;
1175
1176 /* Shut down card and verify memory region */
1177 sdla_down(hw);
1178 if (check_memregion(hw->dpmbase, hw->dpmsize))
1179 return -EINVAL;
1180
1181 /* Initialize adapter and test on-board memory segment by segment.
1182 * If memory size appears to be less than shared memory window size,
1183 * assume that memory region is unusable.
1184 */
1185 err = sdla_init(hw);
1186 if (err) return err;
1187
1188 if (sdla_memtest(hw) < hw->dpmsize) { /* less than window size */
1189 sdla_down(hw);
1190 return -EIO;
1191 }
1192 sdla_mapmem(hw, 0L); /* set window vector at bottom */
1193 return 0;
1194}
1195
1196/*============================================================================
1197 * Load adapter from the memory image of the SDLA firmware module.
1198 * o verify firmware integrity and compatibility
1199 * o start adapter up
1200 */
1201static int sdla_load (sdlahw_t* hw, sfm_t* sfm, unsigned len)
1202{
1203
1204 int i;
1205
1206 /* Verify firmware signature */
1207 if (strcmp(sfm->signature, SFM_SIGNATURE)) {
1208 printk(KERN_INFO "%s: not SDLA firmware!\n",
1209 modname);
1210 return -EINVAL;
1211 }
1212
1213 /* Verify firmware module format version */
1214 if (sfm->version != SFM_VERSION) {
1215 printk(KERN_INFO
1216 "%s: firmware format %u rejected! Expecting %u.\n",
1217 modname, sfm->version, SFM_VERSION);
1218 return -EINVAL;
1219 }
1220
1221 /* Verify firmware module length and checksum */
1222 if ((len - offsetof(sfm_t, image) != sfm->info.codesize) ||
1223 (checksum((void*)&sfm->info,
1224 sizeof(sfm_info_t) + sfm->info.codesize) != sfm->checksum)) {
1225 printk(KERN_INFO "%s: firmware corrupted!\n", modname);
1226 return -EINVAL;
1227 }
1228
1229 /* Announce */
1230 printk(KERN_INFO "%s: loading %s (ID=%u)...\n", modname,
1231 (sfm->descr[0] != '\0') ? sfm->descr : "unknown firmware",
1232 sfm->info.codeid);
1233
1234 if(hw->type == SDLA_S514)
1235 printk(KERN_INFO "%s: loading S514 adapter, CPU %c\n",
1236 modname, hw->S514_cpu_no[0]);
1237
1238 /* Scan through the list of compatible adapters and make sure our
1239 * adapter type is listed.
1240 */
1241 for (i = 0;
1242 (i < SFM_MAX_SDLA) && (sfm->info.adapter[i] != hw->type);
1243 ++i);
1244
1245 if (i == SFM_MAX_SDLA) {
1246 printk(KERN_INFO "%s: firmware is not compatible with S%u!\n",
1247 modname, hw->type);
1248 return -EINVAL;
1249 }
1250
1251
1252 /* Make sure there is enough on-board memory */
1253 if (hw->memory < sfm->info.memsize) {
1254 printk(KERN_INFO
1255 "%s: firmware needs %lu bytes of on-board memory!\n",
1256 modname, sfm->info.memsize);
1257 return -EINVAL;
1258 }
1259
1260 /* Move code onto adapter */
1261 if (sdla_poke(hw, sfm->info.codeoffs, sfm->image, sfm->info.codesize)) {
1262 printk(KERN_INFO "%s: failed to load code segment!\n",
1263 modname);
1264 return -EIO;
1265 }
1266
1267 /* Prepare boot-time configuration data and kick-off CPU */
1268 sdla_bootcfg(hw, &sfm->info);
1269 if (sdla_start(hw, sfm->info.startoffs)) {
1270 printk(KERN_INFO "%s: Damn... Adapter won't start!\n",
1271 modname);
1272 return -EIO;
1273 }
1274
1275 /* position DPM window over the mailbox and enable interrupts */
1276 if (sdla_mapmem(hw, sfm->info.winoffs) || sdla_inten(hw)) {
1277 printk(KERN_INFO "%s: adapter hardware failure!\n",
1278 modname);
1279 return -EIO;
1280 }
1281 hw->fwid = sfm->info.codeid; /* set firmware ID */
1282 return 0;
1283}
1284
1285/*============================================================================
1286 * Initialize SDLA hardware: setup memory window, IRQ, etc.
1287 */
1288static int sdla_init (sdlahw_t* hw)
1289{
1290 int i;
1291
1292 for (i = 0; i < SDLA_MAXIORANGE; ++i)
1293 hw->regs[i] = 0;
1294
1295 switch (hw->type) {
1296 case SDLA_S502A: return init_s502a(hw);
1297 case SDLA_S502E: return init_s502e(hw);
1298 case SDLA_S503: return init_s503(hw);
1299 case SDLA_S507: return init_s507(hw);
1300 case SDLA_S508: return init_s508(hw);
1301 }
1302 return -EINVAL;
1303}
1304
1305/*============================================================================
1306 * Test adapter on-board memory.
1307 * o slide DPM window from the bottom up and test adapter memory segment by
1308 * segment.
1309 * Return adapter memory size.
1310 */
1311static unsigned long sdla_memtest (sdlahw_t* hw)
1312{
1313 unsigned long memsize;
1314 unsigned winsize;
1315
1316 for (memsize = 0, winsize = hw->dpmsize;
1317 !sdla_mapmem(hw, memsize) &&
1318 (test_memregion(hw->dpmbase, winsize) == winsize)
1319 ;
1320 memsize += winsize)
1321 ;
1322 hw->memory = memsize;
1323 return memsize;
1324}
1325
1326/*============================================================================
1327 * Prepare boot-time firmware configuration data.
1328 * o position DPM window
1329 * o initialize configuration data area
1330 */
1331static int sdla_bootcfg (sdlahw_t* hw, sfm_info_t* sfminfo)
1332{
1333 unsigned char* data;
1334
1335 if (!sfminfo->datasize) return 0; /* nothing to do */
1336
1337 if (sdla_mapmem(hw, sfminfo->dataoffs) != 0)
1338 return -EIO;
1339
1340 if(hw->type == SDLA_S514)
1341 data = (void*)(hw->dpmbase + sfminfo->dataoffs);
1342 else
1343 data = (void*)((u8 *)hw->dpmbase +
1344 (sfminfo->dataoffs - hw->vector));
1345
1346 memset_io (data, 0, sfminfo->datasize);
1347
1348 writeb (make_config_byte(hw), &data[0x00]);
1349
1350 switch (sfminfo->codeid) {
1351 case SFID_X25_502:
1352 case SFID_X25_508:
1353 writeb (3, &data[0x01]); /* T1 timer */
1354 writeb (10, &data[0x03]); /* N2 */
1355 writeb (7, &data[0x06]); /* HDLC window size */
1356 writeb (1, &data[0x0B]); /* DTE */
1357 writeb (2, &data[0x0C]); /* X.25 packet window size */
1358 writew (128, &data[0x0D]); /* default X.25 data size */
1359 writew (128, &data[0x0F]); /* maximum X.25 data size */
1360 break;
1361 }
1362 return 0;
1363}
1364
1365/*============================================================================
1366 * Prepare configuration byte identifying adapter type and CPU clock rate.
1367 */
1368static unsigned char make_config_byte (sdlahw_t* hw)
1369{
1370 unsigned char byte = 0;
1371
1372 switch (hw->pclk) {
1373 case 5000: byte = 0x01; break;
1374 case 7200: byte = 0x02; break;
1375 case 8000: byte = 0x03; break;
1376 case 10000: byte = 0x04; break;
1377 case 16000: byte = 0x05; break;
1378 }
1379
1380 switch (hw->type) {
1381 case SDLA_S502E: byte |= 0x80; break;
1382 case SDLA_S503: byte |= 0x40; break;
1383 }
1384 return byte;
1385}
1386
1387/*============================================================================
1388 * Start adapter's CPU.
1389 * o calculate a pointer to adapter's cold boot entry point
1390 * o position DPM window
1391 * o place boot instruction (jp addr) at cold boot entry point
1392 * o start CPU
1393 */
1394static int sdla_start (sdlahw_t* hw, unsigned addr)
1395{
1396 unsigned port = hw->port;
1397 unsigned char *bootp;
1398 int err, tmp, i;
1399
1400 if (!port && (hw->type != SDLA_S514)) return -EFAULT;
1401
1402 switch (hw->type) {
1403 case SDLA_S502A:
1404 bootp = hw->dpmbase;
1405 bootp += 0x66;
1406 break;
1407
1408 case SDLA_S502E:
1409 case SDLA_S503:
1410 case SDLA_S507:
1411 case SDLA_S508:
1412 case SDLA_S514:
1413 bootp = hw->dpmbase;
1414 break;
1415
1416 default:
1417 return -EINVAL;
1418 }
1419
1420 err = sdla_mapmem(hw, 0);
1421 if (err) return err;
1422
1423 writeb (0xC3, bootp); /* Z80: 'jp' opcode */
1424 bootp ++;
1425 writew (addr, bootp);
1426
1427 switch (hw->type) {
1428 case SDLA_S502A:
1429 _OUTB(port, 0x10); /* issue NMI to CPU */
1430 hw->regs[0] = 0x10;
1431 break;
1432
1433 case SDLA_S502E:
1434 _OUTB(port + 3, 0x01); /* start CPU */
1435 hw->regs[3] = 0x01;
1436 for (i = 0; i < SDLA_IODELAY; ++i);
1437 if (_INB(port) & 0x01) { /* verify */
1438 /*
1439 * Enabling CPU changes functionality of the
1440 * control register, so we have to reset its
1441 * mirror.
1442 */
1443 _OUTB(port, 0); /* disable interrupts */
1444 hw->regs[0] = 0;
1445 }
1446 else return -EIO;
1447 break;
1448
1449 case SDLA_S503:
1450 tmp = hw->regs[0] | 0x09; /* set bits 0 and 3 */
1451 _OUTB(port, tmp);
1452 hw->regs[0] = tmp; /* update mirror */
1453 for (i = 0; i < SDLA_IODELAY; ++i);
1454 if (!(_INB(port) & 0x01)) /* verify */
1455 return -EIO;
1456 break;
1457
1458 case SDLA_S507:
1459 tmp = hw->regs[0] | 0x02;
1460 _OUTB(port, tmp);
1461 hw->regs[0] = tmp; /* update mirror */
1462 for (i = 0; i < SDLA_IODELAY; ++i);
1463 if (!(_INB(port) & 0x04)) /* verify */
1464 return -EIO;
1465 break;
1466
1467 case SDLA_S508:
1468 tmp = hw->regs[0] | 0x02;
1469 _OUTB(port, tmp);
1470 hw->regs[0] = tmp; /* update mirror */
1471 for (i = 0; i < SDLA_IODELAY; ++i);
1472 if (!(_INB(port + 1) & 0x02)) /* verify */
1473 return -EIO;
1474 break;
1475
1476 case SDLA_S514:
1477 writeb (S514_CPU_START, hw->vector);
1478 break;
1479
1480 default:
1481 return -EINVAL;
1482 }
1483 return 0;
1484}
1485
1486/*============================================================================
1487 * Initialize S502A adapter.
1488 */
1489static int init_s502a (sdlahw_t* hw)
1490{
1491 unsigned port = hw->port;
1492 int tmp, i;
1493
1494 if (!detect_s502a(port))
1495 return -ENODEV;
1496
1497 hw->regs[0] = 0x08;
1498 hw->regs[1] = 0xFF;
1499
1500 /* Verify configuration options */
1501 i = get_option_index(s502a_dpmbase_options, virt_to_phys(hw->dpmbase));
1502 if (i == 0)
1503 return -EINVAL;
1504
1505 tmp = s502a_hmcr[i - 1];
1506 switch (hw->dpmsize) {
1507 case 0x2000:
1508 tmp |= 0x01;
1509 break;
1510
1511 case 0x10000L:
1512 break;
1513
1514 default:
1515 return -EINVAL;
1516 }
1517
1518 /* Setup dual-port memory window (this also enables memory access) */
1519 _OUTB(port + 1, tmp);
1520 hw->regs[1] = tmp;
1521 hw->regs[0] = 0x08;
1522 return 0;
1523}
1524
1525/*============================================================================
1526 * Initialize S502E adapter.
1527 */
1528static int init_s502e (sdlahw_t* hw)
1529{
1530 unsigned port = hw->port;
1531 int tmp, i;
1532
1533 if (!detect_s502e(port))
1534 return -ENODEV;
1535
1536 /* Verify configuration options */
1537 i = get_option_index(s508_dpmbase_options, virt_to_phys(hw->dpmbase));
1538 if (i == 0)
1539 return -EINVAL;
1540
1541 tmp = s502e_hmcr[i - 1];
1542 switch (hw->dpmsize) {
1543 case 0x2000:
1544 tmp |= 0x01;
1545 break;
1546
1547 case 0x10000L:
1548 break;
1549
1550 default:
1551 return -EINVAL;
1552 }
1553
1554 /* Setup dual-port memory window */
1555 _OUTB(port + 1, tmp);
1556 hw->regs[1] = tmp;
1557
1558 /* Enable memory access */
1559 _OUTB(port, 0x02);
1560 hw->regs[0] = 0x02;
1561 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1562 return (_INB(port) & 0x02) ? 0 : -EIO;
1563}
1564
1565/*============================================================================
1566 * Initialize S503 adapter.
1567 * ---------------------------------------------------------------------------
1568 */
1569static int init_s503 (sdlahw_t* hw)
1570{
1571 unsigned port = hw->port;
1572 int tmp, i;
1573
1574 if (!detect_s503(port))
1575 return -ENODEV;
1576
1577 /* Verify configuration options */
1578 i = get_option_index(s508_dpmbase_options, virt_to_phys(hw->dpmbase));
1579 if (i == 0)
1580 return -EINVAL;
1581
1582 tmp = s502e_hmcr[i - 1];
1583 switch (hw->dpmsize) {
1584 case 0x2000:
1585 tmp |= 0x01;
1586 break;
1587
1588 case 0x10000L:
1589 break;
1590
1591 default:
1592 return -EINVAL;
1593 }
1594
1595 /* Setup dual-port memory window */
1596 _OUTB(port + 1, tmp);
1597 hw->regs[1] = tmp;
1598
1599 /* Enable memory access */
1600 _OUTB(port, 0x02);
1601 hw->regs[0] = 0x02; /* update mirror */
1602 return 0;
1603}
1604
1605/*============================================================================
1606 * Initialize S507 adapter.
1607 */
1608static int init_s507 (sdlahw_t* hw)
1609{
1610 unsigned port = hw->port;
1611 int tmp, i;
1612
1613 if (!detect_s507(port))
1614 return -ENODEV;
1615
1616 /* Verify configuration options */
1617 i = get_option_index(s507_dpmbase_options, virt_to_phys(hw->dpmbase));
1618 if (i == 0)
1619 return -EINVAL;
1620
1621 tmp = s507_hmcr[i - 1];
1622 switch (hw->dpmsize) {
1623 case 0x2000:
1624 tmp |= 0x01;
1625 break;
1626
1627 case 0x10000L:
1628 break;
1629
1630 default:
1631 return -EINVAL;
1632 }
1633
1634 /* Enable adapter's logic */
1635 _OUTB(port, 0x01);
1636 hw->regs[0] = 0x01;
1637 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1638 if (!(_INB(port) & 0x20))
1639 return -EIO;
1640
1641 /* Setup dual-port memory window */
1642 _OUTB(port + 1, tmp);
1643 hw->regs[1] = tmp;
1644
1645 /* Enable memory access */
1646 tmp = hw->regs[0] | 0x04;
1647 if (hw->irq) {
1648 i = get_option_index(s508_irq_options, hw->irq);
1649 if (i) tmp |= s507_irqmask[i - 1];
1650 }
1651 _OUTB(port, tmp);
1652 hw->regs[0] = tmp; /* update mirror */
1653 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1654 return (_INB(port) & 0x08) ? 0 : -EIO;
1655}
1656
1657/*============================================================================
1658 * Initialize S508 adapter.
1659 */
1660static int init_s508 (sdlahw_t* hw)
1661{
1662 unsigned port = hw->port;
1663 int tmp, i;
1664
1665 if (!detect_s508(port))
1666 return -ENODEV;
1667
1668 /* Verify configuration options */
1669 i = get_option_index(s508_dpmbase_options, virt_to_phys(hw->dpmbase));
1670 if (i == 0)
1671 return -EINVAL;
1672
1673 /* Setup memory configuration */
1674 tmp = s508_hmcr[i - 1];
1675 _OUTB(port + 1, tmp);
1676 hw->regs[1] = tmp;
1677
1678 /* Enable memory access */
1679 _OUTB(port, 0x04);
1680 hw->regs[0] = 0x04; /* update mirror */
1681 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1682 return (_INB(port + 1) & 0x04) ? 0 : -EIO;
1683}
1684
1685/*============================================================================
1686 * Detect S502A adapter.
1687 * Following tests are used to detect S502A adapter:
1688 * 1. All registers other than status (BASE) should read 0xFF
1689 * 2. After writing 00001000b to control register, status register should
1690 * read 01000000b.
1691 * 3. After writing 0 to control register, status register should still
1692 * read 01000000b.
1693 * 4. After writing 00000100b to control register, status register should
1694 * read 01000100b.
1695 * Return 1 if detected o.k. or 0 if failed.
1696 * Note: This test is destructive! Adapter will be left in shutdown
1697 * state after the test.
1698 */
1699static int detect_s502a (int port)
1700{
1701 int i, j;
1702
1703 if (!get_option_index(s502_port_options, port))
1704 return 0;
1705
1706 for (j = 1; j < SDLA_MAXIORANGE; ++j) {
1707 if (_INB(port + j) != 0xFF)
1708 return 0;
1709 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1710 }
1711
1712 _OUTB(port, 0x08); /* halt CPU */
1713 _OUTB(port, 0x08);
1714 _OUTB(port, 0x08);
1715 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1716 if (_INB(port) != 0x40)
1717 return 0;
1718 _OUTB(port, 0x00);
1719 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1720 if (_INB(port) != 0x40)
1721 return 0;
1722 _OUTB(port, 0x04);
1723 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1724 if (_INB(port) != 0x44)
1725 return 0;
1726
1727 /* Reset adapter */
1728 _OUTB(port, 0x08);
1729 _OUTB(port, 0x08);
1730 _OUTB(port, 0x08);
1731 _OUTB(port + 1, 0xFF);
1732 return 1;
1733}
1734
1735/*============================================================================
1736 * Detect S502E adapter.
1737 * Following tests are used to verify adapter presence:
1738 * 1. All registers other than status (BASE) should read 0xFF.
1739 * 2. After writing 0 to CPU control register (BASE+3), status register
1740 * (BASE) should read 11111000b.
1741 * 3. After writing 00000100b to port BASE (set bit 2), status register
1742 * (BASE) should read 11111100b.
1743 * Return 1 if detected o.k. or 0 if failed.
1744 * Note: This test is destructive! Adapter will be left in shutdown
1745 * state after the test.
1746 */
1747static int detect_s502e (int port)
1748{
1749 int i, j;
1750
1751 if (!get_option_index(s502_port_options, port))
1752 return 0;
1753 for (j = 1; j < SDLA_MAXIORANGE; ++j) {
1754 if (_INB(port + j) != 0xFF)
1755 return 0;
1756 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1757 }
1758
1759 _OUTB(port + 3, 0); /* CPU control reg. */
1760 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1761 if (_INB(port) != 0xF8) /* read status */
1762 return 0;
1763 _OUTB(port, 0x04); /* set bit 2 */
1764 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1765 if (_INB(port) != 0xFC) /* verify */
1766 return 0;
1767
1768 /* Reset adapter */
1769 _OUTB(port, 0);
1770 return 1;
1771}
1772
1773/*============================================================================
1774 * Detect s503 adapter.
1775 * Following tests are used to verify adapter presence:
1776 * 1. All registers other than status (BASE) should read 0xFF.
1777 * 2. After writing 0 to control register (BASE), status register (BASE)
1778 * should read 11110000b.
1779 * 3. After writing 00000100b (set bit 2) to control register (BASE),
1780 * status register should read 11110010b.
1781 * Return 1 if detected o.k. or 0 if failed.
1782 * Note: This test is destructive! Adapter will be left in shutdown
1783 * state after the test.
1784 */
1785static int detect_s503 (int port)
1786{
1787 int i, j;
1788
1789 if (!get_option_index(s503_port_options, port))
1790 return 0;
1791 for (j = 1; j < SDLA_MAXIORANGE; ++j) {
1792 if (_INB(port + j) != 0xFF)
1793 return 0;
1794 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1795 }
1796
1797 _OUTB(port, 0); /* reset control reg.*/
1798 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1799 if (_INB(port) != 0xF0) /* read status */
1800 return 0;
1801 _OUTB(port, 0x04); /* set bit 2 */
1802 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1803 if (_INB(port) != 0xF2) /* verify */
1804 return 0;
1805
1806 /* Reset adapter */
1807 _OUTB(port, 0);
1808 return 1;
1809}
1810
1811/*============================================================================
1812 * Detect s507 adapter.
1813 * Following tests are used to detect s507 adapter:
1814 * 1. All ports should read the same value.
1815 * 2. After writing 0x00 to control register, status register should read
1816 * ?011000?b.
1817 * 3. After writing 0x01 to control register, status register should read
1818 * ?011001?b.
1819 * Return 1 if detected o.k. or 0 if failed.
1820 * Note: This test is destructive! Adapter will be left in shutdown
1821 * state after the test.
1822 */
1823static int detect_s507 (int port)
1824{
1825 int tmp, i, j;
1826
1827 if (!get_option_index(s508_port_options, port))
1828 return 0;
1829 tmp = _INB(port);
1830 for (j = 1; j < S507_IORANGE; ++j) {
1831 if (_INB(port + j) != tmp)
1832 return 0;
1833 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1834 }
1835
1836 _OUTB(port, 0x00);
1837 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1838 if ((_INB(port) & 0x7E) != 0x30)
1839 return 0;
1840 _OUTB(port, 0x01);
1841 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1842 if ((_INB(port) & 0x7E) != 0x32)
1843 return 0;
1844
1845 /* Reset adapter */
1846 _OUTB(port, 0x00);
1847 return 1;
1848}
1849
1850/*============================================================================
1851 * Detect s508 adapter.
1852 * Following tests are used to detect s508 adapter:
1853 * 1. After writing 0x00 to control register, status register should read
1854 * ??000000b.
1855 * 2. After writing 0x10 to control register, status register should read
1856 * ??010000b
1857 * Return 1 if detected o.k. or 0 if failed.
1858 * Note: This test is destructive! Adapter will be left in shutdown
1859 * state after the test.
1860 */
1861static int detect_s508 (int port)
1862{
1863 int i;
1864
1865 if (!get_option_index(s508_port_options, port))
1866 return 0;
1867 _OUTB(port, 0x00);
1868 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1869 if ((_INB(port + 1) & 0x3F) != 0x00)
1870 return 0;
1871 _OUTB(port, 0x10);
1872 for (i = 0; i < SDLA_IODELAY; ++i); /* delay */
1873 if ((_INB(port + 1) & 0x3F) != 0x10)
1874 return 0;
1875
1876 /* Reset adapter */
1877 _OUTB(port, 0x00);
1878 return 1;
1879}
1880
1881/*============================================================================
1882 * Detect s514 PCI adapter.
1883 * Return 1 if detected o.k. or 0 if failed.
1884 * Note: This test is destructive! Adapter will be left in shutdown
1885 * state after the test.
1886 */
1887static int detect_s514 (sdlahw_t* hw)
1888{
1889 unsigned char CPU_no, slot_no, auto_slot_cfg;
1890 int number_S514_cards = 0;
1891 u32 S514_mem_base_addr = 0;
1892 u32 ut_u32;
1893 struct pci_dev *pci_dev;
1894
1895
1896#ifndef CONFIG_PCI
1897 printk(KERN_INFO "%s: Linux not compiled for PCI usage!\n", modname);
1898 return 0;
1899#endif
1900
1901 /*
1902 The 'setup()' procedure in 'sdlamain.c' passes the CPU number and the
1903 slot number defined in 'router.conf' via the 'port' definition.
1904 */
1905 CPU_no = hw->S514_cpu_no[0];
1906 slot_no = hw->S514_slot_no;
1907 auto_slot_cfg = hw->auto_pci_cfg;
1908
1909 if (auto_slot_cfg){
1910 printk(KERN_INFO "%s: srch... S514 card, CPU %c, Slot=Auto\n",
1911 modname, CPU_no);
1912
1913 }else{
1914 printk(KERN_INFO "%s: srch... S514 card, CPU %c, Slot #%d\n",
1915 modname, CPU_no, slot_no);
1916 }
1917
1918 /* check to see that CPU A or B has been selected in 'router.conf' */
1919 switch(CPU_no) {
1920 case S514_CPU_A:
1921 case S514_CPU_B:
1922 break;
1923
1924 default:
1925 printk(KERN_INFO "%s: S514 CPU definition invalid.\n",
1926 modname);
1927 printk(KERN_INFO "Must be 'A' or 'B'\n");
1928 return 0;
1929 }
1930
1931 number_S514_cards = find_s514_adapter(hw, 0);
1932 if(!number_S514_cards)
1933 return 0;
1934
1935 /* we are using a single S514 adapter with a slot of 0 so re-read the */
1936 /* location of this adapter */
1937 if((number_S514_cards == 1) && auto_slot_cfg) {
1938 number_S514_cards = find_s514_adapter(hw, 1);
1939 if(!number_S514_cards) {
1940 printk(KERN_INFO "%s: Error finding PCI card\n",
1941 modname);
1942 return 0;
1943 }
1944 }
1945
1946 pci_dev = hw->pci_dev;
1947 /* read the physical memory base address */
1948 S514_mem_base_addr = (CPU_no == S514_CPU_A) ?
1949 (pci_dev->resource[1].start) :
1950 (pci_dev->resource[2].start);
1951
1952 printk(KERN_INFO "%s: S514 PCI memory at 0x%X\n",
1953 modname, S514_mem_base_addr);
1954 if(!S514_mem_base_addr) {
1955 if(CPU_no == S514_CPU_B)
1956 printk(KERN_INFO "%s: CPU #B not present on the card\n", modname);
1957 else
1958 printk(KERN_INFO "%s: No PCI memory allocated to card\n", modname);
1959 return 0;
1960 }
1961
1962 /* enable the PCI memory */
1963 pci_read_config_dword(pci_dev,
1964 (CPU_no == S514_CPU_A) ? PCI_MAP0_DWORD : PCI_MAP1_DWORD,
1965 &ut_u32);
1966 pci_write_config_dword(pci_dev,
1967 (CPU_no == S514_CPU_A) ? PCI_MAP0_DWORD : PCI_MAP1_DWORD,
1968 (ut_u32 | PCI_MEMORY_ENABLE));
1969
1970 /* check the IRQ allocated and enable IRQ usage */
1971 if(!(hw->irq = pci_dev->irq)) {
1972 printk(KERN_INFO "%s: IRQ not allocated to S514 adapter\n",
1973 modname);
1974 return 0;
1975 }
1976
1977 /* BUG FIX : Mar 6 2000
1978 * On a initial loading of the card, we must check
1979 * and clear PCI interrupt bits, due to a reset
1980 * problem on some other boards. i.e. An interrupt
1981 * might be pending, even after system bootup,
1982 * in which case, when starting wanrouter the machine
1983 * would crash.
1984 */
1985 if (init_pci_slot(hw))
1986 return 0;
1987
1988 pci_read_config_dword(pci_dev, PCI_INT_CONFIG, &ut_u32);
1989 ut_u32 |= (CPU_no == S514_CPU_A) ?
1990 PCI_ENABLE_IRQ_CPU_A : PCI_ENABLE_IRQ_CPU_B;
1991 pci_write_config_dword(pci_dev, PCI_INT_CONFIG, ut_u32);
1992
1993 printk(KERN_INFO "%s: IRQ %d allocated to the S514 card\n",
1994 modname, hw->irq);
1995
1996 /* map the physical PCI memory to virtual memory */
1997 hw->dpmbase = ioremap((unsigned long)S514_mem_base_addr,
1998 (unsigned long)MAX_SIZEOF_S514_MEMORY);
1999 /* map the physical control register memory to virtual memory */
2000 hw->vector = (unsigned long)ioremap(
2001 (unsigned long)(S514_mem_base_addr + S514_CTRL_REG_BYTE),
2002 (unsigned long)16);
2003
2004 if(!hw->dpmbase || !hw->vector) {
2005 printk(KERN_INFO "%s: PCI virtual memory allocation failed\n",
2006 modname);
2007 return 0;
2008 }
2009
2010 /* halt the adapter */
2011 writeb (S514_CPU_HALT, hw->vector);
2012
2013 return 1;
2014}
2015
2016/*============================================================================
2017 * Find the S514 PCI adapter in the PCI bus.
2018 * Return the number of S514 adapters found (0 if no adapter found).
2019 */
2020static int find_s514_adapter(sdlahw_t* hw, char find_first_S514_card)
2021{
2022 unsigned char slot_no;
2023 int number_S514_cards = 0;
2024 char S514_found_in_slot = 0;
2025 u16 PCI_subsys_vendor;
2026
2027 struct pci_dev *pci_dev = NULL;
2028
2029 slot_no = hw->S514_slot_no;
2030
2031 while ((pci_dev = pci_find_device(V3_VENDOR_ID, V3_DEVICE_ID, pci_dev))
2032 != NULL) {
2033
2034 pci_read_config_word(pci_dev, PCI_SUBSYS_VENDOR_WORD,
2035 &PCI_subsys_vendor);
2036
2037 if(PCI_subsys_vendor != SANGOMA_SUBSYS_VENDOR)
2038 continue;
2039
2040 hw->pci_dev = pci_dev;
2041
2042 if(find_first_S514_card)
2043 return(1);
2044
2045 number_S514_cards ++;
2046
2047 printk(KERN_INFO
2048 "%s: S514 card found, slot #%d (devfn 0x%X)\n",
2049 modname, ((pci_dev->devfn >> 3) & PCI_DEV_SLOT_MASK),
2050 pci_dev->devfn);
2051
2052 if (hw->auto_pci_cfg){
2053 hw->S514_slot_no = ((pci_dev->devfn >> 3) & PCI_DEV_SLOT_MASK);
2054 slot_no = hw->S514_slot_no;
2055
2056 }else if (((pci_dev->devfn >> 3) & PCI_DEV_SLOT_MASK) == slot_no){
2057 S514_found_in_slot = 1;
2058 break;
2059 }
2060 }
2061
2062 /* if no S514 adapter has been found, then exit */
2063 if (!number_S514_cards) {
2064 printk(KERN_INFO "%s: Error, no S514 adapters found\n", modname);
2065 return 0;
2066 }
2067 /* if more than one S514 card has been found, then the user must have */ /* defined a slot number so that the correct adapter is used */
2068 else if ((number_S514_cards > 1) && hw->auto_pci_cfg) {
2069 printk(KERN_INFO "%s: Error, PCI Slot autodetect Failed! \n"
2070 "%s: More than one S514 adapter found.\n"
2071 "%s: Disable the Autodetect feature and supply\n"
2072 "%s: the PCISLOT numbers for each card.\n",
2073 modname,modname,modname,modname);
2074 return 0;
2075 }
2076 /* if the user has specified a slot number and the S514 adapter has */
2077 /* not been found in that slot, then exit */
2078 else if (!hw->auto_pci_cfg && !S514_found_in_slot) {
2079 printk(KERN_INFO
2080 "%s: Error, S514 card not found in specified slot #%d\n",
2081 modname, slot_no);
2082 return 0;
2083 }
2084
2085 return (number_S514_cards);
2086}
2087
2088
2089
2090/******* Miscellaneous ******************************************************/
2091
2092/*============================================================================
2093 * Calibrate SDLA memory access delay.
2094 * Count number of idle loops made within 1 second and then calculate the
2095 * number of loops that should be made to achive desired delay.
2096 */
2097static int calibrate_delay (int mks)
2098{
2099 unsigned int delay;
2100 unsigned long stop;
2101
2102 for (delay = 0, stop = SYSTEM_TICK + HZ; SYSTEM_TICK < stop; ++delay);
2103 return (delay/(1000000L/mks) + 1);
2104}
2105
2106/*============================================================================
2107 * Get option's index into the options list.
2108 * Return option's index (1 .. N) or zero if option is invalid.
2109 */
2110static int get_option_index (unsigned* optlist, unsigned optval)
2111{
2112 int i;
2113
2114 for (i = 1; i <= optlist[0]; ++i)
2115 if ( optlist[i] == optval)
2116 return i;
2117 return 0;
2118}
2119
2120/*============================================================================
2121 * Check memory region to see if it's available.
2122 * Return: 0 ok.
2123 */
2124static unsigned check_memregion (void* ptr, unsigned len)
2125{
2126 volatile unsigned char* p = ptr;
2127
2128 for (; len && (readb (p) == 0xFF); --len, ++p) {
2129 writeb (0, p); /* attempt to write 0 */
2130 if (readb(p) != 0xFF) { /* still has to read 0xFF */
2131 writeb (0xFF, p);/* restore original value */
2132 break; /* not good */
2133 }
2134 }
2135
2136 return len;
2137}
2138
2139/*============================================================================
2140 * Test memory region.
2141 * Return: size of the region that passed the test.
2142 * Note: Region size must be multiple of 2 !
2143 */
2144static unsigned test_memregion (void* ptr, unsigned len)
2145{
2146 volatile unsigned short* w_ptr;
2147 unsigned len_w = len >> 1; /* region len in words */
2148 unsigned i;
2149
2150 for (i = 0, w_ptr = ptr; i < len_w; ++i, ++w_ptr)
2151 writew (0xAA55, w_ptr);
2152
2153 for (i = 0, w_ptr = ptr; i < len_w; ++i, ++w_ptr)
2154 if (readw (w_ptr) != 0xAA55) {
2155 len_w = i;
2156 break;
2157 }
2158
2159 for (i = 0, w_ptr = ptr; i < len_w; ++i, ++w_ptr)
2160 writew (0x55AA, w_ptr);
2161
2162 for (i = 0, w_ptr = ptr; i < len_w; ++i, ++w_ptr)
2163 if (readw(w_ptr) != 0x55AA) {
2164 len_w = i;
2165 break;
2166 }
2167
2168 for (i = 0, w_ptr = ptr; i < len_w; ++i, ++w_ptr)
2169 writew (0, w_ptr);
2170
2171 return len_w << 1;
2172}
2173
2174/*============================================================================
2175 * Calculate 16-bit CRC using CCITT polynomial.
2176 */
2177static unsigned short checksum (unsigned char* buf, unsigned len)
2178{
2179 unsigned short crc = 0;
2180 unsigned mask, flag;
2181
2182 for (; len; --len, ++buf) {
2183 for (mask = 0x80; mask; mask >>= 1) {
2184 flag = (crc & 0x8000);
2185 crc <<= 1;
2186 crc |= ((*buf & mask) ? 1 : 0);
2187 if (flag) crc ^= 0x1021;
2188 }
2189 }
2190 return crc;
2191}
2192
2193static int init_pci_slot(sdlahw_t *hw)
2194{
2195
2196 u32 int_status;
2197 int volatile found=0;
2198 int i=0;
2199
2200 /* Check if this is a very first load for a specific
2201 * pci card. If it is, clear the interrput bits, and
2202 * set the flag indicating that this card was initialized.
2203 */
2204
2205 for (i=0; (i<MAX_S514_CARDS) && !found; i++){
2206 if (pci_slot_ar[i] == hw->S514_slot_no){
2207 found=1;
2208 break;
2209 }
2210 if (pci_slot_ar[i] == 0xFF){
2211 break;
2212 }
2213 }
2214
2215 if (!found){
2216 read_S514_int_stat(hw,&int_status);
2217 S514_intack(hw,int_status);
2218 if (i == MAX_S514_CARDS){
2219 printk(KERN_INFO "%s: Critical Error !!!\n",modname);
2220 printk(KERN_INFO
2221 "%s: Number of Sangoma PCI cards exceeded maximum limit.\n",
2222 modname);
2223 printk(KERN_INFO "Please contact Sangoma Technologies\n");
2224 return 1;
2225 }
2226 pci_slot_ar[i] = hw->S514_slot_no;
2227 }
2228 return 0;
2229}
2230
2231static int pci_probe(sdlahw_t *hw)
2232{
2233
2234 unsigned char slot_no;
2235 int number_S514_cards = 0;
2236 u16 PCI_subsys_vendor;
2237 u16 PCI_card_type;
2238
2239 struct pci_dev *pci_dev = NULL;
2240 struct pci_bus *bus = NULL;
2241
2242 slot_no = 0;
2243
2244 while ((pci_dev = pci_find_device(V3_VENDOR_ID, V3_DEVICE_ID, pci_dev))
2245 != NULL) {
2246
2247 pci_read_config_word(pci_dev, PCI_SUBSYS_VENDOR_WORD,
2248 &PCI_subsys_vendor);
2249
2250 if(PCI_subsys_vendor != SANGOMA_SUBSYS_VENDOR)
2251 continue;
2252
2253 pci_read_config_word(pci_dev, PCI_CARD_TYPE,
2254 &PCI_card_type);
2255
2256 bus = pci_dev->bus;
2257
2258 /* A dual cpu card can support up to 4 physical connections,
2259 * where a single cpu card can support up to 2 physical
2260 * connections. The FT1 card can only support a single
2261 * connection, however we cannot distinguish between a Single
2262 * CPU card and an FT1 card. */
2263 if (PCI_card_type == S514_DUAL_CPU){
2264 number_S514_cards += 4;
2265 printk(KERN_INFO
2266 "wanpipe: S514-PCI card found, cpu(s) 2, bus #%d, slot #%d, irq #%d\n",
2267 bus->number,((pci_dev->devfn >> 3) & PCI_DEV_SLOT_MASK),
2268 pci_dev->irq);
2269 }else{
2270 number_S514_cards += 2;
2271 printk(KERN_INFO
2272 "wanpipe: S514-PCI card found, cpu(s) 1, bus #%d, slot #%d, irq #%d\n",
2273 bus->number,((pci_dev->devfn >> 3) & PCI_DEV_SLOT_MASK),
2274 pci_dev->irq);
2275 }
2276 }
2277
2278 return number_S514_cards;
2279
2280}
2281
2282
2283
2284EXPORT_SYMBOL(wanpipe_hw_probe);
2285
2286unsigned wanpipe_hw_probe(void)
2287{
2288 sdlahw_t hw;
2289 unsigned* opt = s508_port_options;
2290 unsigned cardno=0;
2291 int i;
2292
2293 memset(&hw, 0, sizeof(hw));
2294
2295 for (i = 1; i <= opt[0]; i++) {
2296 if (detect_s508(opt[i])){
2297 /* S508 card can support up to two physical links */
2298 cardno+=2;
2299 printk(KERN_INFO "wanpipe: S508-ISA card found, port 0x%x\n",opt[i]);
2300 }
2301 }
2302
2303 #ifdef CONFIG_PCI
2304 hw.S514_slot_no = 0;
2305 cardno += pci_probe(&hw);
2306 #else
2307 printk(KERN_INFO "wanpipe: Warning, Kernel not compiled for PCI support!\n");
2308 printk(KERN_INFO "wanpipe: PCI Hardware Probe Failed!\n");
2309 #endif
2310
2311 return cardno;
2312}
2313
2314/****** End *****************************************************************/
diff --git a/drivers/net/wan/sdlamain.c b/drivers/net/wan/sdlamain.c
deleted file mode 100644
index 7a8b22a7ea31..000000000000
--- a/drivers/net/wan/sdlamain.c
+++ /dev/null
@@ -1,1346 +0,0 @@
1/****************************************************************************
2* sdlamain.c WANPIPE(tm) Multiprotocol WAN Link Driver. Main module.
3*
4* Author: Nenad Corbic <ncorbic@sangoma.com>
5* Gideon Hack
6*
7* Copyright: (c) 1995-2000 Sangoma Technologies Inc.
8*
9* This program is free software; you can redistribute it and/or
10* modify it under the terms of the GNU General Public License
11* as published by the Free Software Foundation; either version
12* 2 of the License, or (at your option) any later version.
13* ============================================================================
14* Dec 22, 2000 Nenad Corbic Updated for 2.4.X kernels.
15* Removed the polling routine.
16* Nov 13, 2000 Nenad Corbic Added hw probing on module load and dynamic
17* device allocation.
18* Nov 7, 2000 Nenad Corbic Fixed the Multi-Port PPP for kernels
19* 2.2.16 and above.
20* Aug 2, 2000 Nenad Corbic Block the Multi-Port PPP from running on
21* kernels 2.2.16 or greater. The SyncPPP
22* has changed.
23* Jul 25, 2000 Nenad Corbic Updated the Piggiback support for MultPPPP.
24* Jul 13, 2000 Nenad Corbic Added Multi-PPP support.
25* Feb 02, 2000 Nenad Corbic Fixed up piggyback probing and selection.
26* Sep 23, 1999 Nenad Corbic Added support for SMP
27* Sep 13, 1999 Nenad Corbic Each port is treated as a separate device.
28* Jun 02, 1999 Gideon Hack Added support for the S514 adapter.
29* Updates for Linux 2.2.X kernels.
30* Sep 17, 1998 Jaspreet Singh Updated for 2.1.121+ kernel
31* Nov 28, 1997 Jaspreet Singh Changed DRV_RELEASE to 1
32* Nov 10, 1997 Jaspreet Singh Changed sti() to restore_flags();
33* Nov 06, 1997 Jaspreet Singh Changed DRV_VERSION to 4 and DRV_RELEASE to 0
34* Oct 20, 1997 Jaspreet Singh Modified sdla_isr routine so that card->in_isr
35* assignments are taken out and placed in the
36* sdla_ppp.c, sdla_fr.c and sdla_x25.c isr
37* routines. Took out 'wandev->tx_int_enabled' and
38* replaced it with 'wandev->enable_tx_int'.
39* May 29, 1997 Jaspreet Singh Flow Control Problem
40* added "wandev->tx_int_enabled=1" line in the
41* init module. This line initializes the flag for
42* preventing Interrupt disabled with device set to
43* busy
44* Jan 15, 1997 Gene Kozin Version 3.1.0
45* o added UDP management stuff
46* Jan 02, 1997 Gene Kozin Initial version.
47*****************************************************************************/
48
49#include <linux/config.h> /* OS configuration options */
50#include <linux/stddef.h> /* offsetof(), etc. */
51#include <linux/errno.h> /* return codes */
52#include <linux/string.h> /* inline memset(), etc. */
53#include <linux/init.h>
54#include <linux/slab.h> /* kmalloc(), kfree() */
55#include <linux/kernel.h> /* printk(), and other useful stuff */
56#include <linux/module.h> /* support for loadable modules */
57#include <linux/ioport.h> /* request_region(), release_region() */
58#include <linux/wanrouter.h> /* WAN router definitions */
59#include <linux/wanpipe.h> /* WANPIPE common user API definitions */
60#include <linux/rcupdate.h>
61
62#include <linux/in.h>
63#include <asm/io.h> /* phys_to_virt() */
64#include <linux/pci.h>
65#include <linux/sdlapci.h>
66#include <linux/if_wanpipe_common.h>
67
68#include <asm/uaccess.h> /* kernel <-> user copy */
69#include <linux/inetdevice.h>
70
71#include <linux/ip.h>
72#include <net/route.h>
73
74#define KMEM_SAFETYZONE 8
75
76
77#ifndef CONFIG_WANPIPE_FR
78 #define wpf_init(a,b) (-EPROTONOSUPPORT)
79#endif
80
81#ifndef CONFIG_WANPIPE_CHDLC
82 #define wpc_init(a,b) (-EPROTONOSUPPORT)
83#endif
84
85#ifndef CONFIG_WANPIPE_X25
86 #define wpx_init(a,b) (-EPROTONOSUPPORT)
87#endif
88
89#ifndef CONFIG_WANPIPE_PPP
90 #define wpp_init(a,b) (-EPROTONOSUPPORT)
91#endif
92
93#ifndef CONFIG_WANPIPE_MULTPPP
94 #define wsppp_init(a,b) (-EPROTONOSUPPORT)
95#endif
96
97
98/***********FOR DEBUGGING PURPOSES*********************************************
99static void * dbg_kmalloc(unsigned int size, int prio, int line) {
100 int i = 0;
101 void * v = kmalloc(size+sizeof(unsigned int)+2*KMEM_SAFETYZONE*8,prio);
102 char * c1 = v;
103 c1 += sizeof(unsigned int);
104 *((unsigned int *)v) = size;
105
106 for (i = 0; i < KMEM_SAFETYZONE; i++) {
107 c1[0] = 'D'; c1[1] = 'E'; c1[2] = 'A'; c1[3] = 'D';
108 c1[4] = 'B'; c1[5] = 'E'; c1[6] = 'E'; c1[7] = 'F';
109 c1 += 8;
110 }
111 c1 += size;
112 for (i = 0; i < KMEM_SAFETYZONE; i++) {
113 c1[0] = 'M'; c1[1] = 'U'; c1[2] = 'N'; c1[3] = 'G';
114 c1[4] = 'W'; c1[5] = 'A'; c1[6] = 'L'; c1[7] = 'L';
115 c1 += 8;
116 }
117 v = ((char *)v) + sizeof(unsigned int) + KMEM_SAFETYZONE*8;
118 printk(KERN_INFO "line %d kmalloc(%d,%d) = %p\n",line,size,prio,v);
119 return v;
120}
121static void dbg_kfree(void * v, int line) {
122 unsigned int * sp = (unsigned int *)(((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8));
123 unsigned int size = *sp;
124 char * c1 = ((char *)v) - KMEM_SAFETYZONE*8;
125 int i = 0;
126 for (i = 0; i < KMEM_SAFETYZONE; i++) {
127 if ( c1[0] != 'D' || c1[1] != 'E' || c1[2] != 'A' || c1[3] != 'D'
128 || c1[4] != 'B' || c1[5] != 'E' || c1[6] != 'E' || c1[7] != 'F') {
129 printk(KERN_INFO "kmalloced block at %p has been corrupted (underrun)!\n",v);
130 printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8,
131 c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] );
132 }
133 c1 += 8;
134 }
135 c1 += size;
136 for (i = 0; i < KMEM_SAFETYZONE; i++) {
137 if ( c1[0] != 'M' || c1[1] != 'U' || c1[2] != 'N' || c1[3] != 'G'
138 || c1[4] != 'W' || c1[5] != 'A' || c1[6] != 'L' || c1[7] != 'L'
139 ) {
140 printk(KERN_INFO "kmalloced block at %p has been corrupted (overrun):\n",v);
141 printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8,
142 c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] );
143 }
144 c1 += 8;
145 }
146 printk(KERN_INFO "line %d kfree(%p)\n",line,v);
147 v = ((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8);
148 kfree(v);
149}
150
151#define kmalloc(x,y) dbg_kmalloc(x,y,__LINE__)
152#define kfree(x) dbg_kfree(x,__LINE__)
153******************************************************************************/
154
155
156
157/****** Defines & Macros ****************************************************/
158
159#ifdef _DEBUG_
160#define STATIC
161#else
162#define STATIC static
163#endif
164
165#define DRV_VERSION 5 /* version number */
166#define DRV_RELEASE 0 /* release (minor version) number */
167#define MAX_CARDS 16 /* max number of adapters */
168
169#ifndef CONFIG_WANPIPE_CARDS /* configurable option */
170#define CONFIG_WANPIPE_CARDS 1
171#endif
172
173#define CMD_OK 0 /* normal firmware return code */
174#define CMD_TIMEOUT 0xFF /* firmware command timed out */
175#define MAX_CMD_RETRY 10 /* max number of firmware retries */
176/****** Function Prototypes *************************************************/
177
178extern void disable_irq(unsigned int);
179extern void enable_irq(unsigned int);
180
181/* WAN link driver entry points */
182static int setup(struct wan_device* wandev, wandev_conf_t* conf);
183static int shutdown(struct wan_device* wandev);
184static int ioctl(struct wan_device* wandev, unsigned cmd, unsigned long arg);
185
186/* IOCTL handlers */
187static int ioctl_dump (sdla_t* card, sdla_dump_t* u_dump);
188static int ioctl_exec (sdla_t* card, sdla_exec_t* u_exec, int);
189
190/* Miscellaneous functions */
191STATIC irqreturn_t sdla_isr (int irq, void* dev_id, struct pt_regs *regs);
192static void release_hw (sdla_t *card);
193
194static int check_s508_conflicts (sdla_t* card,wandev_conf_t* conf, int*);
195static int check_s514_conflicts (sdla_t* card,wandev_conf_t* conf, int*);
196
197
198/****** Global Data **********************************************************
199 * Note: All data must be explicitly initialized!!!
200 */
201
202/* private data */
203static char drvname[] = "wanpipe";
204static char fullname[] = "WANPIPE(tm) Multiprotocol Driver";
205static char copyright[] = "(c) 1995-2000 Sangoma Technologies Inc.";
206static int ncards;
207static sdla_t* card_array; /* adapter data space */
208
209/* Wanpipe's own workqueue, used for all API's.
210 * All protocol specific tasks will be inserted
211 * into the "wanpipe_wq" workqueue.
212
213 * The kernel workqueue mechanism will execute
214 * all pending tasks in the "wanpipe_wq" workqueue.
215 */
216
217struct workqueue_struct *wanpipe_wq;
218DECLARE_WORK(wanpipe_work, NULL, NULL);
219
220static int wanpipe_bh_critical;
221
222/******* Kernel Loadable Module Entry Points ********************************/
223
224/*============================================================================
225 * Module 'insert' entry point.
226 * o print announcement
227 * o allocate adapter data space
228 * o initialize static data
229 * o register all cards with WAN router
230 * o calibrate SDLA shared memory access delay.
231 *
232 * Return: 0 Ok
233 * < 0 error.
234 * Context: process
235 */
236
237static int __init wanpipe_init(void)
238{
239 int cnt, err = 0;
240
241 printk(KERN_INFO "%s v%u.%u %s\n",
242 fullname, DRV_VERSION, DRV_RELEASE, copyright);
243
244 wanpipe_wq = create_workqueue("wanpipe_wq");
245 if (!wanpipe_wq)
246 return -ENOMEM;
247
248 /* Probe for wanpipe cards and return the number found */
249 printk(KERN_INFO "wanpipe: Probing for WANPIPE hardware.\n");
250 ncards = wanpipe_hw_probe();
251 if (ncards){
252 printk(KERN_INFO "wanpipe: Allocating maximum %i devices: wanpipe%i - wanpipe%i.\n",ncards,1,ncards);
253 }else{
254 printk(KERN_INFO "wanpipe: No S514/S508 cards found, unloading modules!\n");
255 destroy_workqueue(wanpipe_wq);
256 return -ENODEV;
257 }
258
259 /* Verify number of cards and allocate adapter data space */
260 card_array = kmalloc(sizeof(sdla_t) * ncards, GFP_KERNEL);
261 if (card_array == NULL) {
262 destroy_workqueue(wanpipe_wq);
263 return -ENOMEM;
264 }
265
266 memset(card_array, 0, sizeof(sdla_t) * ncards);
267
268 /* Register adapters with WAN router */
269 for (cnt = 0; cnt < ncards; ++ cnt) {
270 sdla_t* card = &card_array[cnt];
271 struct wan_device* wandev = &card->wandev;
272
273 card->next = NULL;
274 sprintf(card->devname, "%s%d", drvname, cnt + 1);
275 wandev->magic = ROUTER_MAGIC;
276 wandev->name = card->devname;
277 wandev->private = card;
278 wandev->enable_tx_int = 0;
279 wandev->setup = &setup;
280 wandev->shutdown = &shutdown;
281 wandev->ioctl = &ioctl;
282 err = register_wan_device(wandev);
283 if (err) {
284 printk(KERN_INFO
285 "%s: %s registration failed with error %d!\n",
286 drvname, card->devname, err);
287 break;
288 }
289 }
290 if (cnt){
291 ncards = cnt; /* adjust actual number of cards */
292 }else {
293 kfree(card_array);
294 destroy_workqueue(wanpipe_wq);
295 printk(KERN_INFO "IN Init Module: NO Cards registered\n");
296 err = -ENODEV;
297 }
298
299 return err;
300}
301
302/*============================================================================
303 * Module 'remove' entry point.
304 * o unregister all adapters from the WAN router
305 * o release all remaining system resources
306 */
307static void __exit wanpipe_cleanup(void)
308{
309 int i;
310
311 if (!ncards)
312 return;
313
314 for (i = 0; i < ncards; ++i) {
315 sdla_t* card = &card_array[i];
316 unregister_wan_device(card->devname);
317 }
318 destroy_workqueue(wanpipe_wq);
319 kfree(card_array);
320
321 printk(KERN_INFO "\nwanpipe: WANPIPE Modules Unloaded.\n");
322}
323
324module_init(wanpipe_init);
325module_exit(wanpipe_cleanup);
326
327/******* WAN Device Driver Entry Points *************************************/
328
329/*============================================================================
330 * Setup/configure WAN link driver.
331 * o check adapter state
332 * o make sure firmware is present in configuration
333 * o make sure I/O port and IRQ are specified
334 * o make sure I/O region is available
335 * o allocate interrupt vector
336 * o setup SDLA hardware
337 * o call appropriate routine to perform protocol-specific initialization
338 * o mark I/O region as used
339 * o if this is the first active card, then schedule background task
340 *
341 * This function is called when router handles ROUTER_SETUP IOCTL. The
342 * configuration structure is in kernel memory (including extended data, if
343 * any).
344 */
345
346static int setup(struct wan_device* wandev, wandev_conf_t* conf)
347{
348 sdla_t* card;
349 int err = 0;
350 int irq=0;
351
352 /* Sanity checks */
353 if ((wandev == NULL) || (wandev->private == NULL) || (conf == NULL)){
354 printk(KERN_INFO
355 "%s: Failed Sdlamain Setup wandev %u, card %u, conf %u !\n",
356 wandev->name,
357 (unsigned int)wandev,(unsigned int)wandev->private,
358 (unsigned int)conf);
359 return -EFAULT;
360 }
361
362 printk(KERN_INFO "%s: Starting WAN Setup\n", wandev->name);
363
364 card = wandev->private;
365 if (wandev->state != WAN_UNCONFIGURED){
366 printk(KERN_INFO "%s: failed sdlamain setup, busy!\n",
367 wandev->name);
368 return -EBUSY; /* already configured */
369 }
370
371 printk(KERN_INFO "\nProcessing WAN device %s...\n", wandev->name);
372
373 /* Initialize the counters for each wandev
374 * Used for counting number of times new_if and
375 * del_if get called.
376 */
377 wandev->del_if_cnt = 0;
378 wandev->new_if_cnt = 0;
379 wandev->config_id = conf->config_id;
380
381 if (!conf->data_size || (conf->data == NULL)) {
382 printk(KERN_INFO
383 "%s: firmware not found in configuration data!\n",
384 wandev->name);
385 return -EINVAL;
386 }
387
388 /* Check for resource conflicts and setup the
389 * card for piggibacking if necessary */
390 if(!conf->S514_CPU_no[0]) {
391 if ((err=check_s508_conflicts(card,conf,&irq)) != 0){
392 return err;
393 }
394 }else {
395 if ((err=check_s514_conflicts(card,conf,&irq)) != 0){
396 return err;
397 }
398 }
399
400 /* If the current card has already been configured
401 * or it's a piggyback card, do not try to allocate
402 * resources.
403 */
404 if (!card->wandev.piggyback && !card->configured){
405
406 /* Configure hardware, load firmware, etc. */
407 memset(&card->hw, 0, sizeof(sdlahw_t));
408
409 /* for an S514 adapter, pass the CPU number and the slot number read */
410 /* from 'router.conf' to the 'sdla_setup()' function via the 'port' */
411 /* parameter */
412 if (conf->S514_CPU_no[0]){
413
414 card->hw.S514_cpu_no[0] = conf->S514_CPU_no[0];
415 card->hw.S514_slot_no = conf->PCI_slot_no;
416 card->hw.auto_pci_cfg = conf->auto_pci_cfg;
417
418 if (card->hw.auto_pci_cfg == WANOPT_YES){
419 printk(KERN_INFO "%s: Setting CPU to %c and Slot to Auto\n",
420 card->devname, card->hw.S514_cpu_no[0]);
421 }else{
422 printk(KERN_INFO "%s: Setting CPU to %c and Slot to %i\n",
423 card->devname, card->hw.S514_cpu_no[0], card->hw.S514_slot_no);
424 }
425
426 }else{
427 /* 508 Card io port and irq initialization */
428 card->hw.port = conf->ioport;
429 card->hw.irq = (conf->irq == 9) ? 2 : conf->irq;
430 }
431
432
433 /* Compute the virtual address of the card in kernel space */
434 if(conf->maddr){
435 card->hw.dpmbase = phys_to_virt(conf->maddr);
436 }else{
437 card->hw.dpmbase = (void *)conf->maddr;
438 }
439
440 card->hw.dpmsize = SDLA_WINDOWSIZE;
441
442 /* set the adapter type if using an S514 adapter */
443 card->hw.type = (conf->S514_CPU_no[0]) ? SDLA_S514 : conf->hw_opt[0];
444 card->hw.pclk = conf->hw_opt[1];
445
446 err = sdla_setup(&card->hw, conf->data, conf->data_size);
447 if (err){
448 printk(KERN_INFO "%s: Hardware setup Failed %i\n",
449 card->devname,err);
450 return err;
451 }
452
453 if(card->hw.type != SDLA_S514)
454 irq = (conf->irq == 2) ? 9 : conf->irq; /* IRQ2 -> IRQ9 */
455 else
456 irq = card->hw.irq;
457
458 /* request an interrupt vector - note that interrupts may be shared */
459 /* when using the S514 PCI adapter */
460
461 if(request_irq(irq, sdla_isr,
462 (card->hw.type == SDLA_S514) ? SA_SHIRQ : 0,
463 wandev->name, card)){
464
465 printk(KERN_INFO "%s: Can't reserve IRQ %d!\n", wandev->name, irq);
466 return -EINVAL;
467 }
468
469 }else{
470 printk(KERN_INFO "%s: Card Configured %lu or Piggybacking %i!\n",
471 wandev->name,card->configured,card->wandev.piggyback);
472 }
473
474
475 if (!card->configured){
476
477 /* Initialize the Spin lock */
478 printk(KERN_INFO "%s: Initializing for SMP\n",wandev->name);
479
480 /* Piggyback spin lock has already been initialized,
481 * in check_s514/s508_conflicts() */
482 if (!card->wandev.piggyback){
483 spin_lock_init(&card->wandev.lock);
484 }
485
486 /* Intialize WAN device data space */
487 wandev->irq = irq;
488 wandev->dma = 0;
489 if(card->hw.type != SDLA_S514){
490 wandev->ioport = card->hw.port;
491 }else{
492 wandev->S514_cpu_no[0] = card->hw.S514_cpu_no[0];
493 wandev->S514_slot_no = card->hw.S514_slot_no;
494 }
495 wandev->maddr = (unsigned long)card->hw.dpmbase;
496 wandev->msize = card->hw.dpmsize;
497 wandev->hw_opt[0] = card->hw.type;
498 wandev->hw_opt[1] = card->hw.pclk;
499 wandev->hw_opt[2] = card->hw.memory;
500 wandev->hw_opt[3] = card->hw.fwid;
501 }
502
503 /* Protocol-specific initialization */
504 switch (card->hw.fwid) {
505
506 case SFID_X25_502:
507 case SFID_X25_508:
508 printk(KERN_INFO "%s: Starting X.25 Protocol Init.\n",
509 card->devname);
510 err = wpx_init(card, conf);
511 break;
512 case SFID_FR502:
513 case SFID_FR508:
514 printk(KERN_INFO "%s: Starting Frame Relay Protocol Init.\n",
515 card->devname);
516 err = wpf_init(card, conf);
517 break;
518 case SFID_PPP502:
519 case SFID_PPP508:
520 printk(KERN_INFO "%s: Starting PPP Protocol Init.\n",
521 card->devname);
522 err = wpp_init(card, conf);
523 break;
524
525 case SFID_CHDLC508:
526 case SFID_CHDLC514:
527 if (conf->ft1){
528 printk(KERN_INFO "%s: Starting FT1 CSU/DSU Config Driver.\n",
529 card->devname);
530 err = wpft1_init(card, conf);
531 break;
532
533 }else if (conf->config_id == WANCONFIG_MPPP){
534 printk(KERN_INFO "%s: Starting Multi-Port PPP Protocol Init.\n",
535 card->devname);
536 err = wsppp_init(card,conf);
537 break;
538
539 }else{
540 printk(KERN_INFO "%s: Starting CHDLC Protocol Init.\n",
541 card->devname);
542 err = wpc_init(card, conf);
543 break;
544 }
545 default:
546 printk(KERN_INFO "%s: Error, Firmware is not supported %X %X!\n",
547 wandev->name,card->hw.fwid,SFID_CHDLC508);
548 err = -EPROTONOSUPPORT;
549 }
550
551 if (err != 0){
552 if (err == -EPROTONOSUPPORT){
553 printk(KERN_INFO
554 "%s: Error, Protocol selected has not been compiled!\n",
555 card->devname);
556 printk(KERN_INFO
557 "%s: Re-configure the kernel and re-build the modules!\n",
558 card->devname);
559 }
560
561 release_hw(card);
562 wandev->state = WAN_UNCONFIGURED;
563 return err;
564 }
565
566
567 /* Reserve I/O region and schedule background task */
568 if(card->hw.type != SDLA_S514 && !card->wandev.piggyback)
569 if (!request_region(card->hw.port, card->hw.io_range,
570 wandev->name)) {
571 printk(KERN_WARNING "port 0x%04x busy\n", card->hw.port);
572 release_hw(card);
573 wandev->state = WAN_UNCONFIGURED;
574 return -EBUSY;
575 }
576
577 /* Only use the polling routine for the X25 protocol */
578
579 card->wandev.critical=0;
580 return 0;
581}
582
583/*==================================================================
584 * configure_s508_card
585 *
586 * For a S508 adapter, check for a possible configuration error in that
587 * we are loading an adapter in the same IO port as a previously loaded S508
588 * card.
589 */
590
591static int check_s508_conflicts (sdla_t* card,wandev_conf_t* conf, int *irq)
592{
593 unsigned long smp_flags;
594 int i;
595
596 if (conf->ioport <= 0) {
597 printk(KERN_INFO
598 "%s: can't configure without I/O port address!\n",
599 card->wandev.name);
600 return -EINVAL;
601 }
602
603 if (conf->irq <= 0) {
604 printk(KERN_INFO "%s: can't configure without IRQ!\n",
605 card->wandev.name);
606 return -EINVAL;
607 }
608
609 if (test_bit(0,&card->configured))
610 return 0;
611
612
613 /* Check for already loaded card with the same IO port and IRQ
614 * If found, copy its hardware configuration and use its
615 * resources (i.e. piggybacking)
616 */
617
618 for (i = 0; i < ncards; i++) {
619 sdla_t *nxt_card = &card_array[i];
620
621 /* Skip the current card ptr */
622 if (nxt_card == card)
623 continue;
624
625
626 /* Find a card that is already configured with the
627 * same IO Port */
628 if ((nxt_card->hw.type == SDLA_S508) &&
629 (nxt_card->hw.port == conf->ioport) &&
630 (nxt_card->next == NULL)){
631
632 /* We found a card the card that has same configuration
633 * as us. This means, that we must setup this card in
634 * piggibacking mode. However, only CHDLC and MPPP protocol
635 * support this setup */
636
637 if ((conf->config_id == WANCONFIG_CHDLC ||
638 conf->config_id == WANCONFIG_MPPP) &&
639 (nxt_card->wandev.config_id == WANCONFIG_CHDLC ||
640 nxt_card->wandev.config_id == WANCONFIG_MPPP)){
641
642 *irq = nxt_card->hw.irq;
643 memcpy(&card->hw, &nxt_card->hw, sizeof(sdlahw_t));
644
645 /* The master could already be running, we must
646 * set this as a critical area */
647 lock_adapter_irq(&nxt_card->wandev.lock, &smp_flags);
648
649 nxt_card->next = card;
650 card->next = nxt_card;
651
652 card->wandev.piggyback = WANOPT_YES;
653
654 /* We must initialise the piggiback spin lock here
655 * since isr will try to lock card->next if it
656 * exists */
657 spin_lock_init(&card->wandev.lock);
658
659 unlock_adapter_irq(&nxt_card->wandev.lock, &smp_flags);
660 break;
661 }else{
662 /* Trying to run piggibacking with a wrong protocol */
663 printk(KERN_INFO "%s: ERROR: Resource busy, ioport: 0x%x\n"
664 "%s: This protocol doesn't support\n"
665 "%s: multi-port operation!\n",
666 card->devname,nxt_card->hw.port,
667 card->devname,card->devname);
668 return -EEXIST;
669 }
670 }
671 }
672
673
674 /* Make sure I/O port region is available only if we are the
675 * master device. If we are running in piggybacking mode,
676 * we will use the resources of the master card. */
677 if (!card->wandev.piggyback) {
678 struct resource *rr =
679 request_region(conf->ioport, SDLA_MAXIORANGE, "sdlamain");
680 release_region(conf->ioport, SDLA_MAXIORANGE);
681
682 if (!rr) {
683 printk(KERN_INFO
684 "%s: I/O region 0x%X - 0x%X is in use!\n",
685 card->wandev.name, conf->ioport,
686 conf->ioport + SDLA_MAXIORANGE - 1);
687 return -EINVAL;
688 }
689 }
690
691 return 0;
692}
693
694/*==================================================================
695 * configure_s514_card
696 *
697 * For a S514 adapter, check for a possible configuration error in that
698 * we are loading an adapter in the same slot as a previously loaded S514
699 * card.
700 */
701
702
703static int check_s514_conflicts(sdla_t* card,wandev_conf_t* conf, int *irq)
704{
705 unsigned long smp_flags;
706 int i;
707
708 if (test_bit(0,&card->configured))
709 return 0;
710
711
712 /* Check for already loaded card with the same IO port and IRQ
713 * If found, copy its hardware configuration and use its
714 * resources (i.e. piggybacking)
715 */
716
717 for (i = 0; i < ncards; i ++) {
718
719 sdla_t* nxt_card = &card_array[i];
720 if(nxt_card == card)
721 continue;
722
723 if((nxt_card->hw.type == SDLA_S514) &&
724 (nxt_card->hw.S514_slot_no == conf->PCI_slot_no) &&
725 (nxt_card->hw.S514_cpu_no[0] == conf->S514_CPU_no[0])&&
726 (nxt_card->next == NULL)){
727
728
729 if ((conf->config_id == WANCONFIG_CHDLC ||
730 conf->config_id == WANCONFIG_MPPP) &&
731 (nxt_card->wandev.config_id == WANCONFIG_CHDLC ||
732 nxt_card->wandev.config_id == WANCONFIG_MPPP)){
733
734 *irq = nxt_card->hw.irq;
735 memcpy(&card->hw, &nxt_card->hw, sizeof(sdlahw_t));
736
737 /* The master could already be running, we must
738 * set this as a critical area */
739 lock_adapter_irq(&nxt_card->wandev.lock,&smp_flags);
740 nxt_card->next = card;
741 card->next = nxt_card;
742
743 card->wandev.piggyback = WANOPT_YES;
744
745 /* We must initialise the piggiback spin lock here
746 * since isr will try to lock card->next if it
747 * exists */
748 spin_lock_init(&card->wandev.lock);
749
750 unlock_adapter_irq(&nxt_card->wandev.lock,&smp_flags);
751
752 }else{
753 /* Trying to run piggibacking with a wrong protocol */
754 printk(KERN_INFO "%s: ERROR: Resource busy: CPU %c PCISLOT %i\n"
755 "%s: This protocol doesn't support\n"
756 "%s: multi-port operation!\n",
757 card->devname,
758 conf->S514_CPU_no[0],conf->PCI_slot_no,
759 card->devname,card->devname);
760 return -EEXIST;
761 }
762 }
763 }
764
765 return 0;
766}
767
768
769
770/*============================================================================
771 * Shut down WAN link driver.
772 * o shut down adapter hardware
773 * o release system resources.
774 *
775 * This function is called by the router when device is being unregistered or
776 * when it handles ROUTER_DOWN IOCTL.
777 */
778static int shutdown(struct wan_device* wandev)
779{
780 sdla_t *card;
781 int err=0;
782
783 /* sanity checks */
784 if ((wandev == NULL) || (wandev->private == NULL)){
785 return -EFAULT;
786 }
787
788 if (wandev->state == WAN_UNCONFIGURED){
789 return 0;
790 }
791
792 card = wandev->private;
793
794 if (card->tty_opt){
795 if (card->tty_open){
796 printk(KERN_INFO
797 "%s: Shutdown Failed: TTY is still open\n",
798 card->devname);
799 return -EBUSY;
800 }
801 }
802
803 wandev->state = WAN_UNCONFIGURED;
804
805 set_bit(PERI_CRIT,(void*)&wandev->critical);
806
807 /* In case of piggibacking, make sure that
808 * we never try to shutdown both devices at the same
809 * time, because they depend on one another */
810
811 if (card->disable_comm){
812 card->disable_comm(card);
813 }
814
815 /* Release Resources */
816 release_hw(card);
817
818 /* only free the allocated I/O range if not an S514 adapter */
819 if (wandev->hw_opt[0] != SDLA_S514 && !card->configured){
820 release_region(card->hw.port, card->hw.io_range);
821 }
822
823 if (!card->configured){
824 memset(&card->hw, 0, sizeof(sdlahw_t));
825 if (card->next){
826 memset(&card->next->hw, 0, sizeof(sdlahw_t));
827 }
828 }
829
830
831 clear_bit(PERI_CRIT,(void*)&wandev->critical);
832 return err;
833}
834
835static void release_hw (sdla_t *card)
836{
837 sdla_t *nxt_card;
838
839
840 /* Check if next device exists */
841 if (card->next){
842 nxt_card = card->next;
843 /* If next device is down then release resources */
844 if (nxt_card->wandev.state == WAN_UNCONFIGURED){
845 if (card->wandev.piggyback){
846 /* If this device is piggyback then use
847 * information of the master device
848 */
849 printk(KERN_INFO "%s: Piggyback shutting down\n",card->devname);
850 sdla_down(&card->next->hw);
851 free_irq(card->wandev.irq, card->next);
852 card->configured = 0;
853 card->next->configured = 0;
854 card->wandev.piggyback = 0;
855 }else{
856 /* Master device shutting down */
857 printk(KERN_INFO "%s: Master shutting down\n",card->devname);
858 sdla_down(&card->hw);
859 free_irq(card->wandev.irq, card);
860 card->configured = 0;
861 card->next->configured = 0;
862 }
863 }else{
864 printk(KERN_INFO "%s: Device still running %i\n",
865 nxt_card->devname,nxt_card->wandev.state);
866
867 card->configured = 1;
868 }
869 }else{
870 printk(KERN_INFO "%s: Master shutting down\n",card->devname);
871 sdla_down(&card->hw);
872 free_irq(card->wandev.irq, card);
873 card->configured = 0;
874 }
875 return;
876}
877
878
879/*============================================================================
880 * Driver I/O control.
881 * o verify arguments
882 * o perform requested action
883 *
884 * This function is called when router handles one of the reserved user
885 * IOCTLs. Note that 'arg' stil points to user address space.
886 */
887static int ioctl(struct wan_device* wandev, unsigned cmd, unsigned long arg)
888{
889 sdla_t* card;
890 int err;
891
892 /* sanity checks */
893 if ((wandev == NULL) || (wandev->private == NULL))
894 return -EFAULT;
895 if (wandev->state == WAN_UNCONFIGURED)
896 return -ENODEV;
897
898 card = wandev->private;
899
900 if(card->hw.type != SDLA_S514){
901 disable_irq(card->hw.irq);
902 }
903
904 if (test_bit(SEND_CRIT, (void*)&wandev->critical)) {
905 return -EAGAIN;
906 }
907
908 switch (cmd) {
909 case WANPIPE_DUMP:
910 err = ioctl_dump(wandev->private, (void*)arg);
911 break;
912
913 case WANPIPE_EXEC:
914 err = ioctl_exec(wandev->private, (void*)arg, cmd);
915 break;
916 default:
917 err = -EINVAL;
918 }
919
920 return err;
921}
922
923/****** Driver IOCTL Handlers ***********************************************/
924
925/*============================================================================
926 * Dump adapter memory to user buffer.
927 * o verify request structure
928 * o copy request structure to kernel data space
929 * o verify length/offset
930 * o verify user buffer
931 * o copy adapter memory image to user buffer
932 *
933 * Note: when dumping memory, this routine switches curent dual-port memory
934 * vector, so care must be taken to avoid racing conditions.
935 */
936static int ioctl_dump (sdla_t* card, sdla_dump_t* u_dump)
937{
938 sdla_dump_t dump;
939 unsigned winsize;
940 unsigned long oldvec; /* DPM window vector */
941 unsigned long smp_flags;
942 int err = 0;
943
944 if(copy_from_user((void*)&dump, (void*)u_dump, sizeof(sdla_dump_t)))
945 return -EFAULT;
946
947 if ((dump.magic != WANPIPE_MAGIC) ||
948 (dump.offset + dump.length > card->hw.memory))
949 return -EINVAL;
950
951 winsize = card->hw.dpmsize;
952
953 if(card->hw.type != SDLA_S514) {
954
955 lock_adapter_irq(&card->wandev.lock, &smp_flags);
956
957 oldvec = card->hw.vector;
958 while (dump.length) {
959 /* current offset */
960 unsigned pos = dump.offset % winsize;
961 /* current vector */
962 unsigned long vec = dump.offset - pos;
963 unsigned len = (dump.length > (winsize - pos)) ?
964 (winsize - pos) : dump.length;
965 /* relocate window */
966 if (sdla_mapmem(&card->hw, vec) != 0) {
967 err = -EIO;
968 break;
969 }
970
971 if(copy_to_user((void *)dump.ptr,
972 (u8 *)card->hw.dpmbase + pos, len)){
973
974 unlock_adapter_irq(&card->wandev.lock, &smp_flags);
975 return -EFAULT;
976 }
977
978 dump.length -= len;
979 dump.offset += len;
980 dump.ptr = (char*)dump.ptr + len;
981 }
982
983 sdla_mapmem(&card->hw, oldvec);/* restore DPM window position */
984 unlock_adapter_irq(&card->wandev.lock, &smp_flags);
985
986 }else {
987
988 if(copy_to_user((void *)dump.ptr,
989 (u8 *)card->hw.dpmbase + dump.offset, dump.length)){
990 return -EFAULT;
991 }
992 }
993
994 return err;
995}
996
997/*============================================================================
998 * Execute adapter firmware command.
999 * o verify request structure
1000 * o copy request structure to kernel data space
1001 * o call protocol-specific 'exec' function
1002 */
1003static int ioctl_exec (sdla_t* card, sdla_exec_t* u_exec, int cmd)
1004{
1005 sdla_exec_t exec;
1006 int err=0;
1007
1008 if (card->exec == NULL && cmd == WANPIPE_EXEC){
1009 return -ENODEV;
1010 }
1011
1012 if(copy_from_user((void*)&exec, (void*)u_exec, sizeof(sdla_exec_t)))
1013 return -EFAULT;
1014
1015 if ((exec.magic != WANPIPE_MAGIC) || (exec.cmd == NULL))
1016 return -EINVAL;
1017
1018 switch (cmd) {
1019 case WANPIPE_EXEC:
1020 err = card->exec(card, exec.cmd, exec.data);
1021 break;
1022 }
1023 return err;
1024}
1025
1026/******* Miscellaneous ******************************************************/
1027
1028/*============================================================================
1029 * SDLA Interrupt Service Routine.
1030 * o acknowledge SDLA hardware interrupt.
1031 * o call protocol-specific interrupt service routine, if any.
1032 */
1033STATIC irqreturn_t sdla_isr (int irq, void* dev_id, struct pt_regs *regs)
1034{
1035#define card ((sdla_t*)dev_id)
1036
1037 if(card->hw.type == SDLA_S514) { /* handle interrrupt on S514 */
1038 u32 int_status;
1039 unsigned char CPU_no = card->hw.S514_cpu_no[0];
1040 unsigned char card_found_for_IRQ;
1041 u8 IRQ_count = 0;
1042
1043 for(;;) {
1044
1045 read_S514_int_stat(&card->hw, &int_status);
1046
1047 /* check if the interrupt is for this device */
1048 if(!((unsigned char)int_status &
1049 (IRQ_CPU_A | IRQ_CPU_B)))
1050 return IRQ_HANDLED;
1051
1052 /* if the IRQ is for both CPUs on the same adapter, */
1053 /* then alter the interrupt status so as to handle */
1054 /* one CPU at a time */
1055 if(((unsigned char)int_status & (IRQ_CPU_A | IRQ_CPU_B))
1056 == (IRQ_CPU_A | IRQ_CPU_B)) {
1057 int_status &= (CPU_no == S514_CPU_A) ?
1058 ~IRQ_CPU_B : ~IRQ_CPU_A;
1059 }
1060
1061 card_found_for_IRQ = 0;
1062
1063 /* check to see that the CPU number for this device */
1064 /* corresponds to the interrupt status read */
1065 switch (CPU_no) {
1066 case S514_CPU_A:
1067 if((unsigned char)int_status &
1068 IRQ_CPU_A)
1069 card_found_for_IRQ = 1;
1070 break;
1071
1072 case S514_CPU_B:
1073 if((unsigned char)int_status &
1074 IRQ_CPU_B)
1075 card_found_for_IRQ = 1;
1076 break;
1077 }
1078
1079 /* exit if the interrupt is for another CPU on the */
1080 /* same IRQ */
1081 if(!card_found_for_IRQ)
1082 return IRQ_HANDLED;
1083
1084 if (!card ||
1085 (card->wandev.state == WAN_UNCONFIGURED && !card->configured)){
1086 printk(KERN_INFO
1087 "Received IRQ %d for CPU #%c\n",
1088 irq, CPU_no);
1089 printk(KERN_INFO
1090 "IRQ for unconfigured adapter\n");
1091 S514_intack(&card->hw, int_status);
1092 return IRQ_HANDLED;
1093 }
1094
1095 if (card->in_isr) {
1096 printk(KERN_INFO
1097 "%s: interrupt re-entrancy on IRQ %d\n",
1098 card->devname, card->wandev.irq);
1099 S514_intack(&card->hw, int_status);
1100 return IRQ_HANDLED;
1101 }
1102
1103 spin_lock(&card->wandev.lock);
1104 if (card->next){
1105 spin_lock(&card->next->wandev.lock);
1106 }
1107
1108 S514_intack(&card->hw, int_status);
1109 if (card->isr)
1110 card->isr(card);
1111
1112 if (card->next){
1113 spin_unlock(&card->next->wandev.lock);
1114 }
1115 spin_unlock(&card->wandev.lock);
1116
1117 /* handle a maximum of two interrupts (one for each */
1118 /* CPU on the adapter) before returning */
1119 if((++ IRQ_count) == 2)
1120 return IRQ_HANDLED;
1121 }
1122 }
1123
1124 else { /* handle interrupt on S508 adapter */
1125
1126 if (!card || ((card->wandev.state == WAN_UNCONFIGURED) && !card->configured))
1127 return IRQ_HANDLED;
1128
1129 if (card->in_isr) {
1130 printk(KERN_INFO
1131 "%s: interrupt re-entrancy on IRQ %d!\n",
1132 card->devname, card->wandev.irq);
1133 return IRQ_HANDLED;
1134 }
1135
1136 spin_lock(&card->wandev.lock);
1137 if (card->next){
1138 spin_lock(&card->next->wandev.lock);
1139 }
1140
1141 sdla_intack(&card->hw);
1142 if (card->isr)
1143 card->isr(card);
1144
1145 if (card->next){
1146 spin_unlock(&card->next->wandev.lock);
1147 }
1148 spin_unlock(&card->wandev.lock);
1149
1150 }
1151 return IRQ_HANDLED;
1152#undef card
1153}
1154
1155/*============================================================================
1156 * This routine is called by the protocol-specific modules when network
1157 * interface is being open. The only reason we need this, is because we
1158 * have to call MOD_INC_USE_COUNT, but cannot include 'module.h' where it's
1159 * defined more than once into the same kernel module.
1160 */
1161void wanpipe_open (sdla_t* card)
1162{
1163 ++card->open_cnt;
1164}
1165
1166/*============================================================================
1167 * This routine is called by the protocol-specific modules when network
1168 * interface is being closed. The only reason we need this, is because we
1169 * have to call MOD_DEC_USE_COUNT, but cannot include 'module.h' where it's
1170 * defined more than once into the same kernel module.
1171 */
1172void wanpipe_close (sdla_t* card)
1173{
1174 --card->open_cnt;
1175}
1176
1177/*============================================================================
1178 * Set WAN device state.
1179 */
1180void wanpipe_set_state (sdla_t* card, int state)
1181{
1182 if (card->wandev.state != state) {
1183 switch (state) {
1184 case WAN_CONNECTED:
1185 printk (KERN_INFO "%s: link connected!\n",
1186 card->devname);
1187 break;
1188
1189 case WAN_CONNECTING:
1190 printk (KERN_INFO "%s: link connecting...\n",
1191 card->devname);
1192 break;
1193
1194 case WAN_DISCONNECTED:
1195 printk (KERN_INFO "%s: link disconnected!\n",
1196 card->devname);
1197 break;
1198 }
1199 card->wandev.state = state;
1200 }
1201 card->state_tick = jiffies;
1202}
1203
1204sdla_t * wanpipe_find_card (char *name)
1205{
1206 int cnt;
1207 for (cnt = 0; cnt < ncards; ++ cnt) {
1208 sdla_t* card = &card_array[cnt];
1209 if (!strcmp(card->devname,name))
1210 return card;
1211 }
1212 return NULL;
1213}
1214
1215sdla_t * wanpipe_find_card_num (int num)
1216{
1217 if (num < 1 || num > ncards)
1218 return NULL;
1219 num--;
1220 return &card_array[num];
1221}
1222
1223/*
1224 * @work_pointer: work_struct to be done;
1225 * should already have PREPARE_WORK() or
1226 * INIT_WORK() done on it by caller;
1227 */
1228void wanpipe_queue_work (struct work_struct *work_pointer)
1229{
1230 if (test_and_set_bit(1, (void*)&wanpipe_bh_critical))
1231 printk(KERN_INFO "CRITICAL IN QUEUING WORK\n");
1232
1233 queue_work(wanpipe_wq, work_pointer);
1234 clear_bit(1,(void*)&wanpipe_bh_critical);
1235}
1236
1237void wakeup_sk_bh(struct net_device *dev)
1238{
1239 wanpipe_common_t *chan = dev->priv;
1240
1241 if (test_bit(0,&chan->common_critical))
1242 return;
1243
1244 if (chan->sk && chan->tx_timer){
1245 chan->tx_timer->expires=jiffies+1;
1246 add_timer(chan->tx_timer);
1247 }
1248}
1249
1250int change_dev_flags(struct net_device *dev, unsigned flags)
1251{
1252 struct ifreq if_info;
1253 mm_segment_t fs = get_fs();
1254 int err;
1255
1256 memset(&if_info, 0, sizeof(if_info));
1257 strcpy(if_info.ifr_name, dev->name);
1258 if_info.ifr_flags = flags;
1259
1260 set_fs(get_ds()); /* get user space block */
1261 err = devinet_ioctl(SIOCSIFFLAGS, &if_info);
1262 set_fs(fs);
1263
1264 return err;
1265}
1266
1267unsigned long get_ip_address(struct net_device *dev, int option)
1268{
1269
1270 struct in_ifaddr *ifaddr;
1271 struct in_device *in_dev;
1272 unsigned long addr = 0;
1273
1274 rcu_read_lock();
1275 if ((in_dev = __in_dev_get_rcu(dev)) == NULL){
1276 goto out;
1277 }
1278
1279 if ((ifaddr = in_dev->ifa_list)== NULL ){
1280 goto out;
1281 }
1282
1283 switch (option){
1284
1285 case WAN_LOCAL_IP:
1286 addr = ifaddr->ifa_local;
1287 break;
1288
1289 case WAN_POINTOPOINT_IP:
1290 addr = ifaddr->ifa_address;
1291 break;
1292
1293 case WAN_NETMASK_IP:
1294 addr = ifaddr->ifa_mask;
1295 break;
1296
1297 case WAN_BROADCAST_IP:
1298 addr = ifaddr->ifa_broadcast;
1299 break;
1300 default:
1301 break;
1302 }
1303
1304out:
1305 rcu_read_unlock();
1306 return addr;
1307}
1308
1309void add_gateway(sdla_t *card, struct net_device *dev)
1310{
1311 mm_segment_t oldfs;
1312 struct rtentry route;
1313 int res;
1314
1315 memset((char*)&route,0,sizeof(struct rtentry));
1316
1317 ((struct sockaddr_in *)
1318 &(route.rt_dst))->sin_addr.s_addr = 0;
1319 ((struct sockaddr_in *)
1320 &(route.rt_dst))->sin_family = AF_INET;
1321
1322 ((struct sockaddr_in *)
1323 &(route.rt_genmask))->sin_addr.s_addr = 0;
1324 ((struct sockaddr_in *)
1325 &(route.rt_genmask)) ->sin_family = AF_INET;
1326
1327
1328 route.rt_flags = 0;
1329 route.rt_dev = dev->name;
1330
1331 oldfs = get_fs();
1332 set_fs(get_ds());
1333 res = ip_rt_ioctl(SIOCADDRT,&route);
1334 set_fs(oldfs);
1335
1336 if (res == 0){
1337 printk(KERN_INFO "%s: Gateway added for %s\n",
1338 card->devname,dev->name);
1339 }
1340
1341 return;
1342}
1343
1344MODULE_LICENSE("GPL");
1345
1346/****** End *********************************************************/
diff --git a/drivers/net/wan/wanpipe_multppp.c b/drivers/net/wan/wanpipe_multppp.c
deleted file mode 100644
index 812a1183c502..000000000000
--- a/drivers/net/wan/wanpipe_multppp.c
+++ /dev/null
@@ -1,2358 +0,0 @@
1/*****************************************************************************
2* wanpipe_multppp.c Multi-Port PPP driver module.
3*
4* Authors: Nenad Corbic <ncorbic@sangoma.com>
5*
6* Copyright: (c) 1995-2001 Sangoma Technologies Inc.
7*
8* This program is free software; you can redistribute it and/or
9* modify it under the terms of the GNU General Public License
10* as published by the Free Software Foundation; either version
11* 2 of the License, or (at your option) any later version.
12* ============================================================================
13* Dec 15 2000 Updated for 2.4.X kernel
14* Nov 15 2000 Fixed the SyncPPP support for kernels 2.2.16 and higher.
15* The pppstruct has changed.
16* Jul 13 2000 Using the kernel Syncppp module on top of RAW Wanpipe CHDLC
17* module.
18*****************************************************************************/
19
20#include <linux/module.h>
21#include <linux/kernel.h> /* printk(), and other useful stuff */
22#include <linux/stddef.h> /* offsetof(), etc. */
23#include <linux/errno.h> /* return codes */
24#include <linux/string.h> /* inline memset(), etc. */
25#include <linux/slab.h> /* kmalloc(), kfree() */
26#include <linux/wanrouter.h> /* WAN router definitions */
27#include <linux/wanpipe.h> /* WANPIPE common user API definitions */
28#include <linux/if_arp.h> /* ARPHRD_* defines */
29#include <linux/jiffies.h> /* time_after() macro */
30
31#include <linux/in.h> /* sockaddr_in */
32#include <linux/inet.h>
33#include <linux/if.h>
34#include <asm/byteorder.h> /* htons(), etc. */
35#include <linux/sdlapci.h>
36#include <asm/io.h>
37
38#include <linux/sdla_chdlc.h> /* CHDLC firmware API definitions */
39#include <linux/sdla_asy.h> /* CHDLC (async) API definitions */
40
41#include <linux/if_wanpipe_common.h> /* Socket Driver common area */
42#include <linux/if_wanpipe.h>
43
44
45#include <linux/inetdevice.h>
46#include <asm/uaccess.h>
47
48#include <net/syncppp.h>
49
50
51/****** Defines & Macros ****************************************************/
52
53#ifdef _DEBUG_
54#define STATIC
55#else
56#define STATIC static
57#endif
58
59/* reasons for enabling the timer interrupt on the adapter */
60#define TMR_INT_ENABLED_UDP 0x01
61#define TMR_INT_ENABLED_UPDATE 0x02
62#define TMR_INT_ENABLED_CONFIG 0x04
63
64#define CHDLC_DFLT_DATA_LEN 1500 /* default MTU */
65#define CHDLC_HDR_LEN 1
66
67#define IFF_POINTTOPOINT 0x10
68
69#define CHDLC_API 0x01
70
71#define PORT(x) (x == 0 ? "PRIMARY" : "SECONDARY" )
72#define MAX_BH_BUFF 10
73
74#define CRC_LENGTH 2
75#define PPP_HEADER_LEN 4
76
77/******Data Structures*****************************************************/
78
79/* This structure is placed in the private data area of the device structure.
80 * The card structure used to occupy the private area but now the following
81 * structure will incorporate the card structure along with CHDLC specific data
82 */
83
84typedef struct chdlc_private_area
85{
86 void *if_ptr; /* General Pointer used by SPPP */
87 wanpipe_common_t common;
88 sdla_t *card;
89 int TracingEnabled; /* For enabling Tracing */
90 unsigned long curr_trace_addr; /* Used for Tracing */
91 unsigned long start_trace_addr;
92 unsigned long end_trace_addr;
93 unsigned long base_addr_trace_buffer;
94 unsigned long end_addr_trace_buffer;
95 unsigned short number_trace_elements;
96 unsigned available_buffer_space;
97 unsigned long router_start_time;
98 unsigned char route_status;
99 unsigned char route_removed;
100 unsigned long tick_counter; /* For 5s timeout counter */
101 unsigned long router_up_time;
102 u32 IP_address; /* IP addressing */
103 u32 IP_netmask;
104 unsigned char mc; /* Mulitcast support on/off */
105 unsigned short udp_pkt_lgth; /* udp packet processing */
106 char udp_pkt_src;
107 char udp_pkt_data[MAX_LGTH_UDP_MGNT_PKT];
108 unsigned short timer_int_enabled;
109 char update_comms_stats; /* updating comms stats */
110
111 //FIXME: add driver stats as per frame relay!
112
113} chdlc_private_area_t;
114
115/* Route Status options */
116#define NO_ROUTE 0x00
117#define ADD_ROUTE 0x01
118#define ROUTE_ADDED 0x02
119#define REMOVE_ROUTE 0x03
120
121
122/* variable for keeping track of enabling/disabling FT1 monitor status */
123static int rCount = 0;
124
125/* variable for tracking how many interfaces to open for WANPIPE on the
126 two ports */
127
128extern void disable_irq(unsigned int);
129extern void enable_irq(unsigned int);
130
131/****** Function Prototypes *************************************************/
132/* WAN link driver entry points. These are called by the WAN router module. */
133static int update(struct wan_device* wandev);
134static int new_if(struct wan_device* wandev, struct net_device* dev,
135 wanif_conf_t* conf);
136static int del_if(struct wan_device* wandev, struct net_device* dev);
137
138/* Network device interface */
139static int if_init(struct net_device* dev);
140static int if_open(struct net_device* dev);
141static int if_close(struct net_device* dev);
142static int if_send(struct sk_buff* skb, struct net_device* dev);
143static struct net_device_stats* if_stats(struct net_device* dev);
144
145static void if_tx_timeout(struct net_device *dev);
146
147/* CHDLC Firmware interface functions */
148static int chdlc_configure (sdla_t* card, void* data);
149static int chdlc_comm_enable (sdla_t* card);
150static int chdlc_comm_disable (sdla_t* card);
151static int chdlc_read_version (sdla_t* card, char* str);
152static int chdlc_set_intr_mode (sdla_t* card, unsigned mode);
153static int chdlc_send (sdla_t* card, void* data, unsigned len);
154static int chdlc_read_comm_err_stats (sdla_t* card);
155static int chdlc_read_op_stats (sdla_t* card);
156static int config_chdlc (sdla_t *card);
157
158
159/* Miscellaneous CHDLC Functions */
160static int set_chdlc_config (sdla_t* card);
161static void init_chdlc_tx_rx_buff(sdla_t* card, struct net_device *dev);
162static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb);
163static int process_chdlc_exception(sdla_t *card);
164static int process_global_exception(sdla_t *card);
165static int update_comms_stats(sdla_t* card,
166 chdlc_private_area_t* chdlc_priv_area);
167static void port_set_state (sdla_t *card, int);
168
169/* Interrupt handlers */
170static void wsppp_isr (sdla_t* card);
171static void rx_intr (sdla_t* card);
172static void timer_intr(sdla_t *);
173
174/* Miscellaneous functions */
175static int reply_udp( unsigned char *data, unsigned int mbox_len );
176static int intr_test( sdla_t* card);
177static int udp_pkt_type( struct sk_buff *skb , sdla_t* card);
178static int store_udp_mgmt_pkt(char udp_pkt_src, sdla_t* card,
179 struct sk_buff *skb, struct net_device* dev,
180 chdlc_private_area_t* chdlc_priv_area);
181static int process_udp_mgmt_pkt(sdla_t* card, struct net_device* dev,
182 chdlc_private_area_t* chdlc_priv_area);
183static unsigned short calc_checksum (char *, int);
184static void s508_lock (sdla_t *card, unsigned long *smp_flags);
185static void s508_unlock (sdla_t *card, unsigned long *smp_flags);
186static void send_ppp_term_request(struct net_device *dev);
187
188
189static int Intr_test_counter;
190/****** Public Functions ****************************************************/
191
192/*============================================================================
193 * Cisco HDLC protocol initialization routine.
194 *
195 * This routine is called by the main WANPIPE module during setup. At this
196 * point adapter is completely initialized and firmware is running.
197 * o read firmware version (to make sure it's alive)
198 * o configure adapter
199 * o initialize protocol-specific fields of the adapter data space.
200 *
201 * Return: 0 o.k.
202 * < 0 failure.
203 */
204int wsppp_init (sdla_t* card, wandev_conf_t* conf)
205{
206 unsigned char port_num;
207 int err;
208 unsigned long max_permitted_baud = 0;
209 SHARED_MEMORY_INFO_STRUCT *flags;
210
211 union
212 {
213 char str[80];
214 } u;
215 volatile CHDLC_MAILBOX_STRUCT* mb;
216 CHDLC_MAILBOX_STRUCT* mb1;
217 unsigned long timeout;
218
219 /* Verify configuration ID */
220 if (conf->config_id != WANCONFIG_MPPP) {
221 printk(KERN_INFO "%s: invalid configuration ID %u!\n",
222 card->devname, conf->config_id);
223 return -EINVAL;
224 }
225
226 /* Find out which Port to use */
227 if ((conf->comm_port == WANOPT_PRI) || (conf->comm_port == WANOPT_SEC)){
228 if (card->next){
229
230 if (conf->comm_port != card->next->u.c.comm_port){
231 card->u.c.comm_port = conf->comm_port;
232 }else{
233 printk(KERN_ERR "%s: ERROR - %s port used!\n",
234 card->wandev.name, PORT(conf->comm_port));
235 return -EINVAL;
236 }
237 }else{
238 card->u.c.comm_port = conf->comm_port;
239 }
240 }else{
241 printk(KERN_ERR "%s: ERROR - Invalid Port Selected!\n",
242 card->wandev.name);
243 return -EINVAL;
244 }
245
246
247 /* Initialize protocol-specific fields */
248 if(card->hw.type != SDLA_S514){
249
250 if (card->u.c.comm_port == WANOPT_PRI){
251 card->mbox = (void *) card->hw.dpmbase;
252 }else{
253 card->mbox = (void *) card->hw.dpmbase +
254 SEC_BASE_ADDR_MB_STRUCT - PRI_BASE_ADDR_MB_STRUCT;
255 }
256 }else{
257 /* for a S514 adapter, set a pointer to the actual mailbox in the */
258 /* allocated virtual memory area */
259 if (card->u.c.comm_port == WANOPT_PRI){
260 card->mbox = (void *) card->hw.dpmbase + PRI_BASE_ADDR_MB_STRUCT;
261 }else{
262 card->mbox = (void *) card->hw.dpmbase + SEC_BASE_ADDR_MB_STRUCT;
263 }
264 }
265
266 mb = mb1 = card->mbox;
267
268 if (!card->configured){
269
270 /* The board will place an 'I' in the return code to indicate that it is
271 ready to accept commands. We expect this to be completed in less
272 than 1 second. */
273
274 timeout = jiffies + 1 * HZ;
275 while (mb->return_code != 'I') /* Wait 1s for board to initialize */
276 if (time_after(jiffies, timeout)) break;
277
278 if (mb->return_code != 'I') {
279 printk(KERN_INFO
280 "%s: Initialization not completed by adapter\n",
281 card->devname);
282 printk(KERN_INFO "Please contact Sangoma representative.\n");
283 return -EIO;
284 }
285 }
286
287 /* Read firmware version. Note that when adapter initializes, it
288 * clears the mailbox, so it may appear that the first command was
289 * executed successfully when in fact it was merely erased. To work
290 * around this, we execute the first command twice.
291 */
292
293 if (chdlc_read_version(card, u.str))
294 return -EIO;
295
296 printk(KERN_INFO "%s: Running Raw CHDLC firmware v%s\n"
297 "%s: for Multi-Port PPP protocol.\n",
298 card->devname,u.str,card->devname);
299
300 card->isr = &wsppp_isr;
301 card->poll = NULL;
302 card->exec = NULL;
303 card->wandev.update = &update;
304 card->wandev.new_if = &new_if;
305 card->wandev.del_if = &del_if;
306 card->wandev.udp_port = conf->udp_port;
307
308 card->wandev.new_if_cnt = 0;
309
310 /* reset the number of times the 'update()' proc has been called */
311 card->u.c.update_call_count = 0;
312
313 card->wandev.ttl = conf->ttl;
314 card->wandev.interface = conf->interface;
315
316 if ((card->u.c.comm_port == WANOPT_SEC && conf->interface == WANOPT_V35)&&
317 card->hw.type != SDLA_S514){
318 printk(KERN_INFO "%s: ERROR - V35 Interface not supported on S508 %s port \n",
319 card->devname, PORT(card->u.c.comm_port));
320 return -EIO;
321 }
322
323
324 card->wandev.clocking = conf->clocking;
325
326 port_num = card->u.c.comm_port;
327
328 /* Setup Port Bps */
329
330 if(card->wandev.clocking) {
331 if((port_num == WANOPT_PRI) || card->u.c.receive_only) {
332 /* For Primary Port 0 */
333 max_permitted_baud =
334 (card->hw.type == SDLA_S514) ?
335 PRI_MAX_BAUD_RATE_S514 :
336 PRI_MAX_BAUD_RATE_S508;
337 }
338 else if(port_num == WANOPT_SEC) {
339 /* For Secondary Port 1 */
340 max_permitted_baud =
341 (card->hw.type == SDLA_S514) ?
342 SEC_MAX_BAUD_RATE_S514 :
343 SEC_MAX_BAUD_RATE_S508;
344 }
345
346 if(conf->bps > max_permitted_baud) {
347 conf->bps = max_permitted_baud;
348 printk(KERN_INFO "%s: Baud too high!\n",
349 card->wandev.name);
350 printk(KERN_INFO "%s: Baud rate set to %lu bps\n",
351 card->wandev.name, max_permitted_baud);
352 }
353
354 card->wandev.bps = conf->bps;
355 }else{
356 card->wandev.bps = 0;
357 }
358
359 /* Setup the Port MTU */
360 if((port_num == WANOPT_PRI) || card->u.c.receive_only) {
361
362 /* For Primary Port 0 */
363 card->wandev.mtu =
364 (conf->mtu >= MIN_LGTH_CHDLC_DATA_CFG) ?
365 min_t(unsigned int, conf->mtu, PRI_MAX_NO_DATA_BYTES_IN_FRAME) :
366 CHDLC_DFLT_DATA_LEN;
367 } else if(port_num == WANOPT_SEC) {
368 /* For Secondary Port 1 */
369 card->wandev.mtu =
370 (conf->mtu >= MIN_LGTH_CHDLC_DATA_CFG) ?
371 min_t(unsigned int, conf->mtu, SEC_MAX_NO_DATA_BYTES_IN_FRAME) :
372 CHDLC_DFLT_DATA_LEN;
373 }
374
375 /* Add on a PPP Header */
376 card->wandev.mtu += PPP_HEADER_LEN;
377
378 /* Set up the interrupt status area */
379 /* Read the CHDLC Configuration and obtain:
380 * Ptr to shared memory infor struct
381 * Use this pointer to calculate the value of card->u.c.flags !
382 */
383 mb1->buffer_length = 0;
384 mb1->command = READ_CHDLC_CONFIGURATION;
385 err = sdla_exec(mb1) ? mb1->return_code : CMD_TIMEOUT;
386 if(err != COMMAND_OK) {
387 clear_bit(1, (void*)&card->wandev.critical);
388
389 if(card->hw.type != SDLA_S514)
390 enable_irq(card->hw.irq);
391
392 chdlc_error(card, err, mb1);
393 return -EIO;
394 }
395
396 if(card->hw.type == SDLA_S514){
397 card->u.c.flags = (void *)(card->hw.dpmbase +
398 (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)->
399 ptr_shared_mem_info_struct));
400 }else{
401 card->u.c.flags = (void *)(card->hw.dpmbase +
402 (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)->
403 ptr_shared_mem_info_struct % SDLA_WINDOWSIZE));
404 }
405
406 flags = card->u.c.flags;
407
408 /* This is for the ports link state */
409 card->wandev.state = WAN_DUALPORT;
410 card->u.c.state = WAN_DISCONNECTED;
411
412
413 if (!card->wandev.piggyback){
414 err = intr_test(card);
415
416 if(err || (Intr_test_counter < MAX_INTR_TEST_COUNTER)) {
417 printk(KERN_ERR "%s: Interrupt test failed (%i)\n",
418 card->devname, Intr_test_counter);
419 printk(KERN_ERR "%s: Please choose another interrupt\n",
420 card->devname);
421 return -EIO;
422 }
423
424 printk(KERN_INFO "%s: Interrupt test passed (%i)\n",
425 card->devname, Intr_test_counter);
426 }
427
428
429 if (chdlc_set_intr_mode(card, APP_INT_ON_TIMER)){
430 printk (KERN_INFO "%s: Failed to set interrupt triggers!\n",
431 card->devname);
432 return -EIO;
433 }
434
435 /* Mask the Timer interrupt */
436 flags->interrupt_info_struct.interrupt_permission &=
437 ~APP_INT_ON_TIMER;
438
439 printk(KERN_INFO "\n");
440
441 return 0;
442}
443
444/******* WAN Device Driver Entry Points *************************************/
445
446/*============================================================================
447 * Update device status & statistics
448 * This procedure is called when updating the PROC file system and returns
449 * various communications statistics. These statistics are accumulated from 3
450 * different locations:
451 * 1) The 'if_stats' recorded for the device.
452 * 2) Communication error statistics on the adapter.
453 * 3) CHDLC operational statistics on the adapter.
454 * The board level statistics are read during a timer interrupt. Note that we
455 * read the error and operational statistics during consecitive timer ticks so
456 * as to minimize the time that we are inside the interrupt handler.
457 *
458 */
459static int update(struct wan_device* wandev)
460{
461 sdla_t* card = wandev->private;
462 struct net_device* dev;
463 volatile chdlc_private_area_t* chdlc_priv_area;
464 SHARED_MEMORY_INFO_STRUCT *flags;
465 unsigned long timeout;
466
467 /* sanity checks */
468 if((wandev == NULL) || (wandev->private == NULL))
469 return -EFAULT;
470
471 if(wandev->state == WAN_UNCONFIGURED)
472 return -ENODEV;
473
474 /* more sanity checks */
475 if(!card->u.c.flags)
476 return -ENODEV;
477
478 if((dev=card->wandev.dev) == NULL)
479 return -ENODEV;
480
481 if((chdlc_priv_area=dev->priv) == NULL)
482 return -ENODEV;
483
484 flags = card->u.c.flags;
485
486 if(chdlc_priv_area->update_comms_stats){
487 return -EAGAIN;
488 }
489
490 /* we will need 2 timer interrupts to complete the */
491 /* reading of the statistics */
492 chdlc_priv_area->update_comms_stats = 2;
493 flags->interrupt_info_struct.interrupt_permission |= APP_INT_ON_TIMER;
494 chdlc_priv_area->timer_int_enabled = TMR_INT_ENABLED_UPDATE;
495
496 /* wait a maximum of 1 second for the statistics to be updated */
497 timeout = jiffies + 1 * HZ;
498 for(;;) {
499 if(chdlc_priv_area->update_comms_stats == 0)
500 break;
501 if (time_after(jiffies, timeout)){
502 chdlc_priv_area->update_comms_stats = 0;
503 chdlc_priv_area->timer_int_enabled &=
504 ~TMR_INT_ENABLED_UPDATE;
505 return -EAGAIN;
506 }
507 }
508
509 return 0;
510}
511
512
513/*============================================================================
514 * Create new logical channel.
515 * This routine is called by the router when ROUTER_IFNEW IOCTL is being
516 * handled.
517 * o parse media- and hardware-specific configuration
518 * o make sure that a new channel can be created
519 * o allocate resources, if necessary
520 * o prepare network device structure for registaration.
521 *
522 * Return: 0 o.k.
523 * < 0 failure (channel will not be created)
524 */
525static int new_if(struct wan_device* wandev, struct net_device* pdev,
526 wanif_conf_t* conf)
527{
528
529 struct ppp_device *pppdev = (struct ppp_device *)pdev;
530 struct net_device *dev = NULL;
531 struct sppp *sp;
532 sdla_t* card = wandev->private;
533 chdlc_private_area_t* chdlc_priv_area;
534
535 if ((conf->name[0] == '\0') || (strlen(conf->name) > WAN_IFNAME_SZ)) {
536 printk(KERN_INFO "%s: invalid interface name!\n",
537 card->devname);
538 return -EINVAL;
539 }
540
541 /* allocate and initialize private data */
542 chdlc_priv_area = kmalloc(sizeof(chdlc_private_area_t), GFP_KERNEL);
543
544 if(chdlc_priv_area == NULL)
545 return -ENOMEM;
546
547 memset(chdlc_priv_area, 0, sizeof(chdlc_private_area_t));
548
549 chdlc_priv_area->card = card;
550
551 /* initialize data */
552 strcpy(card->u.c.if_name, conf->name);
553
554 if(card->wandev.new_if_cnt > 0) {
555 kfree(chdlc_priv_area);
556 return -EEXIST;
557 }
558
559 card->wandev.new_if_cnt++;
560
561 chdlc_priv_area->TracingEnabled = 0;
562
563 //We don't need this any more
564 chdlc_priv_area->route_status = NO_ROUTE;
565 chdlc_priv_area->route_removed = 0;
566
567 printk(KERN_INFO "%s: Firmware running in HDLC STREAMING Mode\n",
568 wandev->name);
569
570 /* Setup wanpipe as a router (WANPIPE) or as an API */
571 if( strcmp(conf->usedby, "WANPIPE") == 0) {
572 printk(KERN_INFO "%s: Driver running in WANPIPE mode!\n",
573 wandev->name);
574 card->u.c.usedby = WANPIPE;
575 } else {
576 printk(KERN_INFO
577 "%s: API Mode is not supported for SyncPPP!\n",
578 wandev->name);
579 kfree(chdlc_priv_area);
580 return -EINVAL;
581 }
582
583 /* Get Multicast Information */
584 chdlc_priv_area->mc = conf->mc;
585
586
587 chdlc_priv_area->if_ptr = pppdev;
588
589 /* prepare network device data space for registration */
590
591 strcpy(dev->name,card->u.c.if_name);
592
593 /* Attach PPP protocol layer to pppdev
594 * The sppp_attach() will initilize the dev structure
595 * and setup ppp layer protocols.
596 * All we have to do is to bind in:
597 * if_open(), if_close(), if_send() and get_stats() functions.
598 */
599 sppp_attach(pppdev);
600 dev = pppdev->dev;
601 sp = &pppdev->sppp;
602
603 /* Enable PPP Debugging */
604 // FIXME Fix this up somehow
605 //sp->pp_flags |= PP_DEBUG;
606 sp->pp_flags &= ~PP_CISCO;
607
608 dev->init = &if_init;
609 dev->priv = chdlc_priv_area;
610
611 return 0;
612}
613
614
615
616
617/*============================================================================
618 * Delete logical channel.
619 */
620static int del_if(struct wan_device* wandev, struct net_device* dev)
621{
622 chdlc_private_area_t *chdlc_priv_area = dev->priv;
623 sdla_t *card = chdlc_priv_area->card;
624 unsigned long smp_lock;
625
626 /* Detach the PPP layer */
627 printk(KERN_INFO "%s: Detaching SyncPPP Module from %s\n",
628 wandev->name,dev->name);
629
630 lock_adapter_irq(&wandev->lock,&smp_lock);
631
632 sppp_detach(dev);
633 chdlc_priv_area->if_ptr=NULL;
634
635 chdlc_set_intr_mode(card, 0);
636 if (card->u.c.comm_enabled)
637 chdlc_comm_disable(card);
638 unlock_adapter_irq(&wandev->lock,&smp_lock);
639
640 port_set_state(card, WAN_DISCONNECTED);
641
642 return 0;
643}
644
645
646/****** Network Device Interface ********************************************/
647
648/*============================================================================
649 * Initialize Linux network interface.
650 *
651 * This routine is called only once for each interface, during Linux network
652 * interface registration. Returning anything but zero will fail interface
653 * registration.
654 */
655static int if_init(struct net_device* dev)
656{
657 chdlc_private_area_t* chdlc_priv_area = dev->priv;
658 sdla_t* card = chdlc_priv_area->card;
659 struct wan_device* wandev = &card->wandev;
660
661 /* NOTE: Most of the dev initialization was
662 * done in sppp_attach(), called by new_if()
663 * function. All we have to do here is
664 * to link four major routines below.
665 */
666
667 /* Initialize device driver entry points */
668 dev->open = &if_open;
669 dev->stop = &if_close;
670 dev->hard_start_xmit = &if_send;
671 dev->get_stats = &if_stats;
672 dev->tx_timeout = &if_tx_timeout;
673 dev->watchdog_timeo = TX_TIMEOUT;
674
675
676 /* Initialize hardware parameters */
677 dev->irq = wandev->irq;
678 dev->dma = wandev->dma;
679 dev->base_addr = wandev->ioport;
680 dev->mem_start = wandev->maddr;
681 dev->mem_end = wandev->maddr + wandev->msize - 1;
682
683 /* Set transmit buffer queue length
684 * If we over fill this queue the packets will
685 * be droped by the kernel.
686 * sppp_attach() sets this to 10, but
687 * 100 will give us more room at low speeds.
688 */
689 dev->tx_queue_len = 100;
690
691 return 0;
692}
693
694
695/*============================================================================
696 * Handle transmit timeout event from netif watchdog
697 */
698static void if_tx_timeout(struct net_device *dev)
699{
700 chdlc_private_area_t* chan = dev->priv;
701 sdla_t *card = chan->card;
702
703 /* If our device stays busy for at least 5 seconds then we will
704 * kick start the device by making dev->tbusy = 0. We expect
705 * that our device never stays busy more than 5 seconds. So this
706 * is only used as a last resort.
707 */
708
709 ++card->wandev.stats.collisions;
710
711 printk (KERN_INFO "%s: Transmit timed out on %s\n", card->devname,dev->name);
712 netif_wake_queue (dev);
713}
714
715
716/*============================================================================
717 * Open network interface.
718 * o enable communications and interrupts.
719 * o prevent module from unloading by incrementing use count
720 *
721 * Return 0 if O.k. or errno.
722 */
723static int if_open(struct net_device* dev)
724{
725 chdlc_private_area_t* chdlc_priv_area = dev->priv;
726 sdla_t* card = chdlc_priv_area->card;
727 struct timeval tv;
728 SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags;
729
730 /* Only one open per interface is allowed */
731 if (netif_running(dev))
732 return -EBUSY;
733
734 /* Start PPP Layer */
735 if (sppp_open(dev)){
736 return -EIO;
737 }
738
739 do_gettimeofday(&tv);
740 chdlc_priv_area->router_start_time = tv.tv_sec;
741
742 netif_start_queue(dev);
743
744 wanpipe_open(card);
745
746 chdlc_priv_area->timer_int_enabled |= TMR_INT_ENABLED_CONFIG;
747 flags->interrupt_info_struct.interrupt_permission |= APP_INT_ON_TIMER;
748 return 0;
749}
750
751/*============================================================================
752 * Close network interface.
753 * o if this is the last close, then disable communications and interrupts.
754 * o reset flags.
755 */
756static int if_close(struct net_device* dev)
757{
758 chdlc_private_area_t* chdlc_priv_area = dev->priv;
759 sdla_t* card = chdlc_priv_area->card;
760
761 /* Stop the PPP Layer */
762 sppp_close(dev);
763 netif_stop_queue(dev);
764
765 wanpipe_close(card);
766
767 return 0;
768}
769
770/*============================================================================
771 * Send a packet on a network interface.
772 * o set tbusy flag (marks start of the transmission) to block a timer-based
773 * transmit from overlapping.
774 * o check link state. If link is not up, then drop the packet.
775 * o execute adapter send command.
776 * o free socket buffer
777 *
778 * Return: 0 complete (socket buffer must be freed)
779 * non-0 packet may be re-transmitted (tbusy must be set)
780 *
781 * Notes:
782 * 1. This routine is called either by the protocol stack or by the "net
783 * bottom half" (with interrupts enabled).
784 * 2. Setting tbusy flag will inhibit further transmit requests from the
785 * protocol stack and can be used for flow control with protocol layer.
786 */
787static int if_send(struct sk_buff* skb, struct net_device* dev)
788{
789 chdlc_private_area_t *chdlc_priv_area = dev->priv;
790 sdla_t *card = chdlc_priv_area->card;
791 SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags;
792 INTERRUPT_INFORMATION_STRUCT *chdlc_int = &flags->interrupt_info_struct;
793 int udp_type = 0;
794 unsigned long smp_flags;
795 int err=0;
796
797 netif_stop_queue(dev);
798
799
800 if (skb == NULL){
801 /* If we get here, some higher layer thinks we've missed an
802 * tx-done interrupt.
803 */
804 printk(KERN_INFO "%s: Received NULL skb buffer! interface %s got kicked!\n",
805 card->devname, dev->name);
806
807 netif_wake_queue(dev);
808 return 0;
809 }
810
811 if (ntohs(skb->protocol) != htons(PVC_PROT)){
812 /* check the udp packet type */
813
814 udp_type = udp_pkt_type(skb, card);
815 if (udp_type == UDP_CPIPE_TYPE){
816 if(store_udp_mgmt_pkt(UDP_PKT_FRM_STACK, card, skb, dev,
817 chdlc_priv_area)){
818 chdlc_int->interrupt_permission |=
819 APP_INT_ON_TIMER;
820 }
821 netif_start_queue(dev);
822 return 0;
823 }
824 }
825
826 /* Lock the 508 Card: SMP is supported */
827 if(card->hw.type != SDLA_S514){
828 s508_lock(card,&smp_flags);
829 }
830
831 if (test_and_set_bit(SEND_CRIT, (void*)&card->wandev.critical)){
832
833 printk(KERN_INFO "%s: Critical in if_send: %lx\n",
834 card->wandev.name,card->wandev.critical);
835 ++card->wandev.stats.tx_dropped;
836 netif_start_queue(dev);
837 goto if_send_crit_exit;
838 }
839
840 if (card->wandev.state != WAN_CONNECTED){
841 ++card->wandev.stats.tx_dropped;
842 netif_start_queue(dev);
843 goto if_send_crit_exit;
844 }
845
846 if (chdlc_send(card, skb->data, skb->len)){
847 netif_stop_queue(dev);
848
849 }else{
850 ++card->wandev.stats.tx_packets;
851 card->wandev.stats.tx_bytes += skb->len;
852 dev->trans_start = jiffies;
853 netif_start_queue(dev);
854 }
855
856if_send_crit_exit:
857 if (!(err=netif_queue_stopped(dev))){
858 dev_kfree_skb_any(skb);
859 }else{
860 chdlc_priv_area->tick_counter = jiffies;
861 chdlc_int->interrupt_permission |= APP_INT_ON_TX_FRAME;
862 }
863
864 clear_bit(SEND_CRIT, (void*)&card->wandev.critical);
865 if(card->hw.type != SDLA_S514){
866 s508_unlock(card,&smp_flags);
867 }
868
869 return err;
870}
871
872
873/*============================================================================
874 * Reply to UDP Management system.
875 * Return length of reply.
876 */
877static int reply_udp( unsigned char *data, unsigned int mbox_len )
878{
879
880 unsigned short len, udp_length, temp, ip_length;
881 unsigned long ip_temp;
882 int even_bound = 0;
883 chdlc_udp_pkt_t *c_udp_pkt = (chdlc_udp_pkt_t *)data;
884
885 /* Set length of packet */
886 len = sizeof(ip_pkt_t)+
887 sizeof(udp_pkt_t)+
888 sizeof(wp_mgmt_t)+
889 sizeof(cblock_t)+
890 sizeof(trace_info_t)+
891 mbox_len;
892
893 /* fill in UDP reply */
894 c_udp_pkt->wp_mgmt.request_reply = UDPMGMT_REPLY;
895
896 /* fill in UDP length */
897 udp_length = sizeof(udp_pkt_t)+
898 sizeof(wp_mgmt_t)+
899 sizeof(cblock_t)+
900 sizeof(trace_info_t)+
901 mbox_len;
902
903 /* put it on an even boundary */
904 if ( udp_length & 0x0001 ) {
905 udp_length += 1;
906 len += 1;
907 even_bound = 1;
908 }
909
910 temp = (udp_length<<8)|(udp_length>>8);
911 c_udp_pkt->udp_pkt.udp_length = temp;
912
913 /* swap UDP ports */
914 temp = c_udp_pkt->udp_pkt.udp_src_port;
915 c_udp_pkt->udp_pkt.udp_src_port =
916 c_udp_pkt->udp_pkt.udp_dst_port;
917 c_udp_pkt->udp_pkt.udp_dst_port = temp;
918
919 /* add UDP pseudo header */
920 temp = 0x1100;
921 *((unsigned short *)(c_udp_pkt->data+mbox_len+even_bound)) = temp;
922 temp = (udp_length<<8)|(udp_length>>8);
923 *((unsigned short *)(c_udp_pkt->data+mbox_len+even_bound+2)) = temp;
924
925
926 /* calculate UDP checksum */
927 c_udp_pkt->udp_pkt.udp_checksum = 0;
928 c_udp_pkt->udp_pkt.udp_checksum = calc_checksum(&data[UDP_OFFSET],udp_length+UDP_OFFSET);
929
930 /* fill in IP length */
931 ip_length = len;
932 temp = (ip_length<<8)|(ip_length>>8);
933 c_udp_pkt->ip_pkt.total_length = temp;
934
935 /* swap IP addresses */
936 ip_temp = c_udp_pkt->ip_pkt.ip_src_address;
937 c_udp_pkt->ip_pkt.ip_src_address = c_udp_pkt->ip_pkt.ip_dst_address;
938 c_udp_pkt->ip_pkt.ip_dst_address = ip_temp;
939
940 /* fill in IP checksum */
941 c_udp_pkt->ip_pkt.hdr_checksum = 0;
942 c_udp_pkt->ip_pkt.hdr_checksum = calc_checksum(data,sizeof(ip_pkt_t));
943
944 return len;
945
946} /* reply_udp */
947
948unsigned short calc_checksum (char *data, int len)
949{
950 unsigned short temp;
951 unsigned long sum=0;
952 int i;
953
954 for( i = 0; i <len; i+=2 ) {
955 memcpy(&temp,&data[i],2);
956 sum += (unsigned long)temp;
957 }
958
959 while (sum >> 16 ) {
960 sum = (sum & 0xffffUL) + (sum >> 16);
961 }
962
963 temp = (unsigned short)sum;
964 temp = ~temp;
965
966 if( temp == 0 )
967 temp = 0xffff;
968
969 return temp;
970}
971
972
973/*============================================================================
974 * Get ethernet-style interface statistics.
975 * Return a pointer to struct enet_statistics.
976 */
977static struct net_device_stats* if_stats(struct net_device* dev)
978{
979 sdla_t *my_card;
980 chdlc_private_area_t* chdlc_priv_area;
981
982 /* Shutdown bug fix. In del_if() we kill
983 * dev->priv pointer. This function, gets
984 * called after del_if(), thus check
985 * if pointer has been deleted */
986 if ((chdlc_priv_area=dev->priv) == NULL)
987 return NULL;
988
989 my_card = chdlc_priv_area->card;
990 return &my_card->wandev.stats;
991}
992
993
994/****** Cisco HDLC Firmware Interface Functions *******************************/
995
996/*============================================================================
997 * Read firmware code version.
998 * Put code version as ASCII string in str.
999 */
1000static int chdlc_read_version (sdla_t* card, char* str)
1001{
1002 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
1003 int len;
1004 char err;
1005 mb->buffer_length = 0;
1006 mb->command = READ_CHDLC_CODE_VERSION;
1007 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1008
1009 if(err != COMMAND_OK) {
1010 chdlc_error(card,err,mb);
1011 }
1012 else if (str) { /* is not null */
1013 len = mb->buffer_length;
1014 memcpy(str, mb->data, len);
1015 str[len] = '\0';
1016 }
1017 return (err);
1018}
1019
1020/*-----------------------------------------------------------------------------
1021 * Configure CHDLC firmware.
1022 */
1023static int chdlc_configure (sdla_t* card, void* data)
1024{
1025 int err;
1026 CHDLC_MAILBOX_STRUCT *mailbox = card->mbox;
1027 int data_length = sizeof(CHDLC_CONFIGURATION_STRUCT);
1028
1029 mailbox->buffer_length = data_length;
1030 memcpy(mailbox->data, data, data_length);
1031 mailbox->command = SET_CHDLC_CONFIGURATION;
1032 err = sdla_exec(mailbox) ? mailbox->return_code : CMD_TIMEOUT;
1033
1034 if (err != COMMAND_OK) chdlc_error (card, err, mailbox);
1035
1036 return err;
1037}
1038
1039
1040/*============================================================================
1041 * Set interrupt mode -- HDLC Version.
1042 */
1043
1044static int chdlc_set_intr_mode (sdla_t* card, unsigned mode)
1045{
1046 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
1047 CHDLC_INT_TRIGGERS_STRUCT* int_data =
1048 (CHDLC_INT_TRIGGERS_STRUCT *)mb->data;
1049 int err;
1050
1051 int_data->CHDLC_interrupt_triggers = mode;
1052 int_data->IRQ = card->hw.irq;
1053 int_data->interrupt_timer = 1;
1054
1055 mb->buffer_length = sizeof(CHDLC_INT_TRIGGERS_STRUCT);
1056 mb->command = SET_CHDLC_INTERRUPT_TRIGGERS;
1057 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1058 if (err != COMMAND_OK)
1059 chdlc_error (card, err, mb);
1060 return err;
1061}
1062
1063
1064/*============================================================================
1065 * Enable communications.
1066 */
1067
1068static int chdlc_comm_enable (sdla_t* card)
1069{
1070 int err;
1071 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
1072
1073 mb->buffer_length = 0;
1074 mb->command = ENABLE_CHDLC_COMMUNICATIONS;
1075 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1076 if (err != COMMAND_OK)
1077 chdlc_error(card, err, mb);
1078 else
1079 card->u.c.comm_enabled=1;
1080
1081 return err;
1082}
1083
1084/*============================================================================
1085 * Disable communications and Drop the Modem lines (DCD and RTS).
1086 */
1087static int chdlc_comm_disable (sdla_t* card)
1088{
1089 int err;
1090 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
1091
1092 mb->buffer_length = 0;
1093 mb->command = DISABLE_CHDLC_COMMUNICATIONS;
1094 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1095 if (err != COMMAND_OK)
1096 chdlc_error(card,err,mb);
1097
1098 return err;
1099}
1100
1101/*============================================================================
1102 * Read communication error statistics.
1103 */
1104static int chdlc_read_comm_err_stats (sdla_t* card)
1105{
1106 int err;
1107 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
1108
1109 mb->buffer_length = 0;
1110 mb->command = READ_COMMS_ERROR_STATS;
1111 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1112 if (err != COMMAND_OK)
1113 chdlc_error(card,err,mb);
1114 return err;
1115}
1116
1117
1118/*============================================================================
1119 * Read CHDLC operational statistics.
1120 */
1121static int chdlc_read_op_stats (sdla_t* card)
1122{
1123 int err;
1124 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
1125
1126 mb->buffer_length = 0;
1127 mb->command = READ_CHDLC_OPERATIONAL_STATS;
1128 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1129 if (err != COMMAND_OK)
1130 chdlc_error(card,err,mb);
1131 return err;
1132}
1133
1134
1135/*============================================================================
1136 * Update communications error and general packet statistics.
1137 */
1138static int update_comms_stats(sdla_t* card,
1139 chdlc_private_area_t* chdlc_priv_area)
1140{
1141 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
1142 COMMS_ERROR_STATS_STRUCT* err_stats;
1143 CHDLC_OPERATIONAL_STATS_STRUCT *op_stats;
1144
1145 /* on the first timer interrupt, read the comms error statistics */
1146 if(chdlc_priv_area->update_comms_stats == 2) {
1147 if(chdlc_read_comm_err_stats(card))
1148 return 1;
1149 err_stats = (COMMS_ERROR_STATS_STRUCT *)mb->data;
1150 card->wandev.stats.rx_over_errors =
1151 err_stats->Rx_overrun_err_count;
1152 card->wandev.stats.rx_crc_errors =
1153 err_stats->CRC_err_count;
1154 card->wandev.stats.rx_frame_errors =
1155 err_stats->Rx_abort_count;
1156 card->wandev.stats.rx_fifo_errors =
1157 err_stats->Rx_dis_pri_bfrs_full_count;
1158 card->wandev.stats.rx_missed_errors =
1159 card->wandev.stats.rx_fifo_errors;
1160 card->wandev.stats.tx_aborted_errors =
1161 err_stats->sec_Tx_abort_count;
1162 }
1163
1164 /* on the second timer interrupt, read the operational statistics */
1165 else {
1166 if(chdlc_read_op_stats(card))
1167 return 1;
1168 op_stats = (CHDLC_OPERATIONAL_STATS_STRUCT *)mb->data;
1169 card->wandev.stats.rx_length_errors =
1170 (op_stats->Rx_Data_discard_short_count +
1171 op_stats->Rx_Data_discard_long_count);
1172 }
1173
1174 return 0;
1175}
1176
1177/*============================================================================
1178 * Send packet.
1179 * Return: 0 - o.k.
1180 * 1 - no transmit buffers available
1181 */
1182static int chdlc_send (sdla_t* card, void* data, unsigned len)
1183{
1184 CHDLC_DATA_TX_STATUS_EL_STRUCT *txbuf = card->u.c.txbuf;
1185
1186 if (txbuf->opp_flag)
1187 return 1;
1188
1189 sdla_poke(&card->hw, txbuf->ptr_data_bfr, data, len);
1190
1191 txbuf->frame_length = len;
1192 txbuf->opp_flag = 1; /* start transmission */
1193
1194 /* Update transmit buffer control fields */
1195 card->u.c.txbuf = ++txbuf;
1196
1197 if ((void*)txbuf > card->u.c.txbuf_last)
1198 card->u.c.txbuf = card->u.c.txbuf_base;
1199
1200 return 0;
1201}
1202
1203/****** Firmware Error Handler **********************************************/
1204
1205/*============================================================================
1206 * Firmware error handler.
1207 * This routine is called whenever firmware command returns non-zero
1208 * return code.
1209 *
1210 * Return zero if previous command has to be cancelled.
1211 */
1212static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb)
1213{
1214 unsigned cmd = mb->command;
1215
1216 switch (err) {
1217
1218 case CMD_TIMEOUT:
1219 printk(KERN_ERR "%s: command 0x%02X timed out!\n",
1220 card->devname, cmd);
1221 break;
1222
1223 case S514_BOTH_PORTS_SAME_CLK_MODE:
1224 if(cmd == SET_CHDLC_CONFIGURATION) {
1225 printk(KERN_INFO
1226 "%s: Configure both ports for the same clock source\n",
1227 card->devname);
1228 break;
1229 }
1230
1231 default:
1232 printk(KERN_INFO "%s: command 0x%02X returned 0x%02X!\n",
1233 card->devname, cmd, err);
1234 }
1235
1236 return 0;
1237}
1238
1239/****** Interrupt Handlers **************************************************/
1240
1241/*============================================================================
1242 * Cisco HDLC interrupt service routine.
1243 */
1244STATIC void wsppp_isr (sdla_t* card)
1245{
1246 struct net_device* dev;
1247 SHARED_MEMORY_INFO_STRUCT* flags = NULL;
1248 int i;
1249 sdla_t *my_card;
1250
1251
1252 /* Check for which port the interrupt has been generated
1253 * Since Secondary Port is piggybacking on the Primary
1254 * the check must be done here.
1255 */
1256
1257 flags = card->u.c.flags;
1258 if (!flags->interrupt_info_struct.interrupt_type){
1259 /* Check for a second port (piggybacking) */
1260 if((my_card = card->next)){
1261 flags = my_card->u.c.flags;
1262 if (flags->interrupt_info_struct.interrupt_type){
1263 card = my_card;
1264 card->isr(card);
1265 return;
1266 }
1267 }
1268 }
1269
1270 dev = card->wandev.dev;
1271 card->in_isr = 1;
1272 flags = card->u.c.flags;
1273
1274 /* If we get an interrupt with no network device, stop the interrupts
1275 * and issue an error */
1276 if ((!dev || !dev->priv) && flags->interrupt_info_struct.interrupt_type !=
1277 COMMAND_COMPLETE_APP_INT_PEND){
1278 goto isr_done;
1279 }
1280
1281
1282 /* if critical due to peripheral operations
1283 * ie. update() or getstats() then reset the interrupt and
1284 * wait for the board to retrigger.
1285 */
1286 if(test_bit(PERI_CRIT, (void*)&card->wandev.critical)) {
1287 flags->interrupt_info_struct.
1288 interrupt_type = 0;
1289 goto isr_done;
1290 }
1291
1292
1293 /* On a 508 Card, if critical due to if_send
1294 * Major Error !!!
1295 */
1296 if(card->hw.type != SDLA_S514) {
1297 if(test_bit(0, (void*)&card->wandev.critical)) {
1298 printk(KERN_INFO "%s: Critical while in ISR: %lx\n",
1299 card->devname, card->wandev.critical);
1300 goto isr_done;
1301 }
1302 }
1303
1304 switch(flags->interrupt_info_struct.interrupt_type) {
1305
1306 case RX_APP_INT_PEND: /* 0x01: receive interrupt */
1307 rx_intr(card);
1308 break;
1309
1310 case TX_APP_INT_PEND: /* 0x02: transmit interrupt */
1311 flags->interrupt_info_struct.interrupt_permission &=
1312 ~APP_INT_ON_TX_FRAME;
1313
1314 netif_wake_queue(dev);
1315 break;
1316
1317 case COMMAND_COMPLETE_APP_INT_PEND:/* 0x04: cmd cplt */
1318 ++ Intr_test_counter;
1319 break;
1320
1321 case CHDLC_EXCEP_COND_APP_INT_PEND: /* 0x20 */
1322 process_chdlc_exception(card);
1323 break;
1324
1325 case GLOBAL_EXCEP_COND_APP_INT_PEND:
1326 process_global_exception(card);
1327 break;
1328
1329 case TIMER_APP_INT_PEND:
1330 timer_intr(card);
1331 break;
1332
1333 default:
1334 printk(KERN_INFO "%s: spurious interrupt 0x%02X!\n",
1335 card->devname,
1336 flags->interrupt_info_struct.interrupt_type);
1337 printk(KERN_INFO "Code name: ");
1338 for(i = 0; i < 4; i ++)
1339 printk(KERN_INFO "%c",
1340 flags->global_info_struct.codename[i]);
1341 printk(KERN_INFO "\nCode version: ");
1342 for(i = 0; i < 4; i ++)
1343 printk(KERN_INFO "%c",
1344 flags->global_info_struct.codeversion[i]);
1345 printk(KERN_INFO "\n");
1346 break;
1347 }
1348
1349isr_done:
1350 card->in_isr = 0;
1351 flags->interrupt_info_struct.interrupt_type = 0;
1352}
1353
1354/*============================================================================
1355 * Receive interrupt handler.
1356 */
1357static void rx_intr (sdla_t* card)
1358{
1359 struct net_device *dev;
1360 chdlc_private_area_t *chdlc_priv_area;
1361 SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags;
1362 CHDLC_DATA_RX_STATUS_EL_STRUCT *rxbuf = card->u.c.rxmb;
1363 struct sk_buff *skb;
1364 unsigned len;
1365 unsigned addr = rxbuf->ptr_data_bfr;
1366 void *buf;
1367 int i,udp_type;
1368
1369 if (rxbuf->opp_flag != 0x01) {
1370 printk(KERN_INFO
1371 "%s: corrupted Rx buffer @ 0x%X, flag = 0x%02X!\n",
1372 card->devname, (unsigned)rxbuf, rxbuf->opp_flag);
1373 printk(KERN_INFO "Code name: ");
1374 for(i = 0; i < 4; i ++)
1375 printk(KERN_INFO "%c",
1376 flags->global_info_struct.codename[i]);
1377 printk(KERN_INFO "\nCode version: ");
1378 for(i = 0; i < 4; i ++)
1379 printk(KERN_INFO "%c",
1380 flags->global_info_struct.codeversion[i]);
1381 printk(KERN_INFO "\n");
1382
1383
1384 /* Bug Fix: Mar 6 2000
1385 * If we get a corrupted mailbox, it measn that driver
1386 * is out of sync with the firmware. There is no recovery.
1387 * If we don't turn off all interrupts for this card
1388 * the machine will crash.
1389 */
1390 printk(KERN_INFO "%s: Critical router failure ...!!!\n", card->devname);
1391 printk(KERN_INFO "Please contact Sangoma Technologies !\n");
1392 chdlc_set_intr_mode(card,0);
1393 return;
1394 }
1395
1396 dev = card->wandev.dev;
1397
1398 if (!dev){
1399 goto rx_exit;
1400 }
1401
1402 if (!netif_running(dev)){
1403 goto rx_exit;
1404 }
1405
1406 chdlc_priv_area = dev->priv;
1407
1408 if (rxbuf->error_flag){
1409 goto rx_exit;
1410 }
1411 /* Take off two CRC bytes */
1412
1413 if (rxbuf->frame_length < 7 || rxbuf->frame_length > 1506 ){
1414 goto rx_exit;
1415 }
1416
1417 len = rxbuf->frame_length - CRC_LENGTH;
1418
1419 /* Allocate socket buffer */
1420 skb = dev_alloc_skb(len);
1421
1422 if (skb == NULL) {
1423 if (net_ratelimit()){
1424 printk(KERN_INFO "%s: no socket buffers available!\n",
1425 card->devname);
1426 }
1427 ++card->wandev.stats.rx_dropped;
1428 goto rx_exit;
1429 }
1430
1431 /* Copy data to the socket buffer */
1432 if((addr + len) > card->u.c.rx_top + 1) {
1433 unsigned tmp = card->u.c.rx_top - addr + 1;
1434 buf = skb_put(skb, tmp);
1435 sdla_peek(&card->hw, addr, buf, tmp);
1436 addr = card->u.c.rx_base;
1437 len -= tmp;
1438 }
1439
1440 buf = skb_put(skb, len);
1441 sdla_peek(&card->hw, addr, buf, len);
1442
1443 skb->protocol = htons(ETH_P_WAN_PPP);
1444
1445 card->wandev.stats.rx_packets ++;
1446 card->wandev.stats.rx_bytes += skb->len;
1447 udp_type = udp_pkt_type( skb, card );
1448
1449 if(udp_type == UDP_CPIPE_TYPE) {
1450 if(store_udp_mgmt_pkt(UDP_PKT_FRM_NETWORK,
1451 card, skb, dev, chdlc_priv_area)) {
1452 flags->interrupt_info_struct.
1453 interrupt_permission |=
1454 APP_INT_ON_TIMER;
1455 }
1456 }else{
1457 /* Pass it up the protocol stack */
1458 skb->dev = dev;
1459 skb->mac.raw = skb->data;
1460 netif_rx(skb);
1461 dev->last_rx = jiffies;
1462 }
1463
1464rx_exit:
1465 /* Release buffer element and calculate a pointer to the next one */
1466 rxbuf->opp_flag = 0x00;
1467 card->u.c.rxmb = ++ rxbuf;
1468 if((void*)rxbuf > card->u.c.rxbuf_last){
1469 card->u.c.rxmb = card->u.c.rxbuf_base;
1470 }
1471}
1472
1473/*============================================================================
1474 * Timer interrupt handler.
1475 * The timer interrupt is used for two purposes:
1476 * 1) Processing udp calls from 'cpipemon'.
1477 * 2) Reading board-level statistics for updating the proc file system.
1478 */
1479void timer_intr(sdla_t *card)
1480{
1481 struct net_device* dev;
1482 chdlc_private_area_t* chdlc_priv_area = NULL;
1483 SHARED_MEMORY_INFO_STRUCT* flags = NULL;
1484
1485 dev = card->wandev.dev;
1486 chdlc_priv_area = dev->priv;
1487
1488 if (chdlc_priv_area->timer_int_enabled & TMR_INT_ENABLED_CONFIG) {
1489 if (!config_chdlc(card)){
1490 chdlc_priv_area->timer_int_enabled &= ~TMR_INT_ENABLED_CONFIG;
1491 }
1492 }
1493
1494 /* process a udp call if pending */
1495 if(chdlc_priv_area->timer_int_enabled & TMR_INT_ENABLED_UDP) {
1496 process_udp_mgmt_pkt(card, dev,
1497 chdlc_priv_area);
1498 chdlc_priv_area->timer_int_enabled &= ~TMR_INT_ENABLED_UDP;
1499 }
1500
1501
1502 /* read the communications statistics if required */
1503 if(chdlc_priv_area->timer_int_enabled & TMR_INT_ENABLED_UPDATE) {
1504 update_comms_stats(card, chdlc_priv_area);
1505 if(!(-- chdlc_priv_area->update_comms_stats)) {
1506 chdlc_priv_area->timer_int_enabled &=
1507 ~TMR_INT_ENABLED_UPDATE;
1508 }
1509 }
1510
1511 /* only disable the timer interrupt if there are no udp or statistic */
1512 /* updates pending */
1513 if(!chdlc_priv_area->timer_int_enabled) {
1514 flags = card->u.c.flags;
1515 flags->interrupt_info_struct.interrupt_permission &=
1516 ~APP_INT_ON_TIMER;
1517 }
1518}
1519
1520/*------------------------------------------------------------------------------
1521 Miscellaneous Functions
1522 - set_chdlc_config() used to set configuration options on the board
1523------------------------------------------------------------------------------*/
1524
1525static int set_chdlc_config(sdla_t* card)
1526{
1527
1528 CHDLC_CONFIGURATION_STRUCT cfg;
1529
1530 memset(&cfg, 0, sizeof(CHDLC_CONFIGURATION_STRUCT));
1531
1532 if(card->wandev.clocking)
1533 cfg.baud_rate = card->wandev.bps;
1534
1535 cfg.line_config_options = (card->wandev.interface == WANOPT_RS232) ?
1536 INTERFACE_LEVEL_RS232 : INTERFACE_LEVEL_V35;
1537
1538 cfg.modem_config_options = 0;
1539 //API OPTIONS
1540 cfg.CHDLC_API_options = DISCARD_RX_ERROR_FRAMES;
1541 cfg.modem_status_timer = 100;
1542 cfg.CHDLC_protocol_options = HDLC_STREAMING_MODE;
1543 cfg.percent_data_buffer_for_Tx = 50;
1544 cfg.CHDLC_statistics_options = (CHDLC_TX_DATA_BYTE_COUNT_STAT |
1545 CHDLC_RX_DATA_BYTE_COUNT_STAT);
1546 cfg.max_CHDLC_data_field_length = card->wandev.mtu;
1547
1548 cfg.transmit_keepalive_timer = 0;
1549 cfg.receive_keepalive_timer = 0;
1550 cfg.keepalive_error_tolerance = 0;
1551 cfg.SLARP_request_timer = 0;
1552
1553 cfg.IP_address = 0;
1554 cfg.IP_netmask = 0;
1555
1556 return chdlc_configure(card, &cfg);
1557}
1558
1559/*============================================================================
1560 * Process global exception condition
1561 */
1562static int process_global_exception(sdla_t *card)
1563{
1564 CHDLC_MAILBOX_STRUCT* mbox = card->mbox;
1565 int err;
1566
1567 mbox->buffer_length = 0;
1568 mbox->command = READ_GLOBAL_EXCEPTION_CONDITION;
1569 err = sdla_exec(mbox) ? mbox->return_code : CMD_TIMEOUT;
1570
1571 if(err != CMD_TIMEOUT ){
1572
1573 switch(mbox->return_code) {
1574
1575 case EXCEP_MODEM_STATUS_CHANGE:
1576
1577 printk(KERN_INFO "%s: Modem status change\n",
1578 card->devname);
1579
1580 switch(mbox->data[0] & (DCD_HIGH | CTS_HIGH)) {
1581 case (DCD_HIGH):
1582 printk(KERN_INFO "%s: DCD high, CTS low\n",card->devname);
1583 break;
1584 case (CTS_HIGH):
1585 printk(KERN_INFO "%s: DCD low, CTS high\n",card->devname);
1586 break;
1587 case ((DCD_HIGH | CTS_HIGH)):
1588 printk(KERN_INFO "%s: DCD high, CTS high\n",card->devname);
1589 break;
1590 default:
1591 printk(KERN_INFO "%s: DCD low, CTS low\n",card->devname);
1592 break;
1593 }
1594
1595 if (!(mbox->data[0] & DCD_HIGH) || !(mbox->data[0] & DCD_HIGH)){
1596 //printk(KERN_INFO "Sending TERM Request Manually !\n");
1597 send_ppp_term_request(card->wandev.dev);
1598 }
1599 break;
1600
1601 case EXCEP_TRC_DISABLED:
1602 printk(KERN_INFO "%s: Line trace disabled\n",
1603 card->devname);
1604 break;
1605
1606 case EXCEP_IRQ_TIMEOUT:
1607 printk(KERN_INFO "%s: IRQ timeout occurred\n",
1608 card->devname);
1609 break;
1610
1611 default:
1612 printk(KERN_INFO "%s: Global exception %x\n",
1613 card->devname, mbox->return_code);
1614 break;
1615 }
1616 }
1617 return 0;
1618}
1619
1620
1621/*============================================================================
1622 * Process chdlc exception condition
1623 */
1624static int process_chdlc_exception(sdla_t *card)
1625{
1626 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
1627 int err;
1628
1629 mb->buffer_length = 0;
1630 mb->command = READ_CHDLC_EXCEPTION_CONDITION;
1631 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1632 if(err != CMD_TIMEOUT) {
1633
1634 switch (err) {
1635
1636 case EXCEP_LINK_ACTIVE:
1637 port_set_state(card, WAN_CONNECTED);
1638 break;
1639
1640 case EXCEP_LINK_INACTIVE_MODEM:
1641 port_set_state(card, WAN_DISCONNECTED);
1642 break;
1643
1644 case EXCEP_LOOPBACK_CONDITION:
1645 printk(KERN_INFO "%s: Loopback Condition Detected.\n",
1646 card->devname);
1647 break;
1648
1649 case NO_CHDLC_EXCEP_COND_TO_REPORT:
1650 printk(KERN_INFO "%s: No exceptions reported.\n",
1651 card->devname);
1652 break;
1653 default:
1654 printk(KERN_INFO "%s: Exception Condition %x!\n",
1655 card->devname,err);
1656 break;
1657 }
1658
1659 }
1660 return 0;
1661}
1662
1663
1664/*=============================================================================
1665 * Store a UDP management packet for later processing.
1666 */
1667
1668static int store_udp_mgmt_pkt(char udp_pkt_src, sdla_t* card,
1669 struct sk_buff *skb, struct net_device* dev,
1670 chdlc_private_area_t* chdlc_priv_area )
1671{
1672 int udp_pkt_stored = 0;
1673
1674 if(!chdlc_priv_area->udp_pkt_lgth &&
1675 (skb->len <= MAX_LGTH_UDP_MGNT_PKT)) {
1676 chdlc_priv_area->udp_pkt_lgth = skb->len;
1677 chdlc_priv_area->udp_pkt_src = udp_pkt_src;
1678 memcpy(chdlc_priv_area->udp_pkt_data, skb->data, skb->len);
1679 chdlc_priv_area->timer_int_enabled = TMR_INT_ENABLED_UDP;
1680 udp_pkt_stored = 1;
1681 }
1682
1683 if(udp_pkt_src == UDP_PKT_FRM_STACK)
1684 dev_kfree_skb_any(skb);
1685 else
1686 dev_kfree_skb_any(skb);
1687
1688 return(udp_pkt_stored);
1689}
1690
1691
1692/*=============================================================================
1693 * Process UDP management packet.
1694 */
1695
1696static int process_udp_mgmt_pkt(sdla_t* card, struct net_device* dev,
1697 chdlc_private_area_t* chdlc_priv_area )
1698{
1699 unsigned char *buf;
1700 unsigned int frames, len;
1701 struct sk_buff *new_skb;
1702 unsigned short buffer_length, real_len;
1703 unsigned long data_ptr;
1704 unsigned data_length;
1705 int udp_mgmt_req_valid = 1;
1706 CHDLC_MAILBOX_STRUCT *mb = card->mbox;
1707 SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags;
1708 chdlc_udp_pkt_t *chdlc_udp_pkt;
1709 struct timeval tv;
1710 int err;
1711 char ut_char;
1712
1713 chdlc_udp_pkt = (chdlc_udp_pkt_t *) chdlc_priv_area->udp_pkt_data;
1714
1715 if(chdlc_priv_area->udp_pkt_src == UDP_PKT_FRM_NETWORK) {
1716
1717 switch(chdlc_udp_pkt->cblock.command) {
1718 case READ_GLOBAL_STATISTICS:
1719 case READ_MODEM_STATUS:
1720 case READ_CHDLC_LINK_STATUS:
1721 case CPIPE_ROUTER_UP_TIME:
1722 case READ_COMMS_ERROR_STATS:
1723 case READ_CHDLC_OPERATIONAL_STATS:
1724
1725 /* These two commands are executed for
1726 * each request */
1727 case READ_CHDLC_CONFIGURATION:
1728 case READ_CHDLC_CODE_VERSION:
1729 udp_mgmt_req_valid = 1;
1730 break;
1731 default:
1732 udp_mgmt_req_valid = 0;
1733 break;
1734 }
1735 }
1736
1737 if(!udp_mgmt_req_valid) {
1738
1739 /* set length to 0 */
1740 chdlc_udp_pkt->cblock.buffer_length = 0;
1741
1742 /* set return code */
1743 chdlc_udp_pkt->cblock.return_code = 0xCD;
1744
1745 if (net_ratelimit()){
1746 printk(KERN_INFO
1747 "%s: Warning, Illegal UDP command attempted from network: %x\n",
1748 card->devname,chdlc_udp_pkt->cblock.command);
1749 }
1750
1751 } else {
1752 unsigned long trace_status_cfg_addr = 0;
1753 TRACE_STATUS_EL_CFG_STRUCT trace_cfg_struct;
1754 TRACE_STATUS_ELEMENT_STRUCT trace_element_struct;
1755
1756 switch(chdlc_udp_pkt->cblock.command) {
1757
1758 case CPIPE_ENABLE_TRACING:
1759 if (!chdlc_priv_area->TracingEnabled) {
1760
1761 /* OPERATE_DATALINE_MONITOR */
1762
1763 mb->buffer_length = sizeof(LINE_TRACE_CONFIG_STRUCT);
1764 mb->command = SET_TRACE_CONFIGURATION;
1765
1766 ((LINE_TRACE_CONFIG_STRUCT *)mb->data)->
1767 trace_config = TRACE_ACTIVE;
1768 /* Trace delay mode is not used because it slows
1769 down transfer and results in a standoff situation
1770 when there is a lot of data */
1771
1772 /* Configure the Trace based on user inputs */
1773 ((LINE_TRACE_CONFIG_STRUCT *)mb->data)->trace_config |=
1774 chdlc_udp_pkt->data[0];
1775
1776 ((LINE_TRACE_CONFIG_STRUCT *)mb->data)->
1777 trace_deactivation_timer = 4000;
1778
1779
1780 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1781 if (err != COMMAND_OK) {
1782 chdlc_error(card,err,mb);
1783 card->TracingEnabled = 0;
1784 chdlc_udp_pkt->cblock.return_code = err;
1785 mb->buffer_length = 0;
1786 break;
1787 }
1788
1789 /* Get the base address of the trace element list */
1790 mb->buffer_length = 0;
1791 mb->command = READ_TRACE_CONFIGURATION;
1792 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1793
1794 if (err != COMMAND_OK) {
1795 chdlc_error(card,err,mb);
1796 chdlc_priv_area->TracingEnabled = 0;
1797 chdlc_udp_pkt->cblock.return_code = err;
1798 mb->buffer_length = 0;
1799 break;
1800 }
1801
1802 trace_status_cfg_addr =((LINE_TRACE_CONFIG_STRUCT *)
1803 mb->data) -> ptr_trace_stat_el_cfg_struct;
1804
1805 sdla_peek(&card->hw, trace_status_cfg_addr,
1806 &trace_cfg_struct, sizeof(trace_cfg_struct));
1807
1808 chdlc_priv_area->start_trace_addr = trace_cfg_struct.
1809 base_addr_trace_status_elements;
1810
1811 chdlc_priv_area->number_trace_elements =
1812 trace_cfg_struct.number_trace_status_elements;
1813
1814 chdlc_priv_area->end_trace_addr = (unsigned long)
1815 ((TRACE_STATUS_ELEMENT_STRUCT *)
1816 chdlc_priv_area->start_trace_addr +
1817 (chdlc_priv_area->number_trace_elements - 1));
1818
1819 chdlc_priv_area->base_addr_trace_buffer =
1820 trace_cfg_struct.base_addr_trace_buffer;
1821
1822 chdlc_priv_area->end_addr_trace_buffer =
1823 trace_cfg_struct.end_addr_trace_buffer;
1824
1825 chdlc_priv_area->curr_trace_addr =
1826 trace_cfg_struct.next_trace_element_to_use;
1827
1828 chdlc_priv_area->available_buffer_space = 2000 -
1829 sizeof(ip_pkt_t) -
1830 sizeof(udp_pkt_t) -
1831 sizeof(wp_mgmt_t) -
1832 sizeof(cblock_t) -
1833 sizeof(trace_info_t);
1834 }
1835 chdlc_udp_pkt->cblock.return_code = COMMAND_OK;
1836 mb->buffer_length = 0;
1837 chdlc_priv_area->TracingEnabled = 1;
1838 break;
1839
1840
1841 case CPIPE_DISABLE_TRACING:
1842 if (chdlc_priv_area->TracingEnabled) {
1843
1844 /* OPERATE_DATALINE_MONITOR */
1845 mb->buffer_length = sizeof(LINE_TRACE_CONFIG_STRUCT);
1846 mb->command = SET_TRACE_CONFIGURATION;
1847 ((LINE_TRACE_CONFIG_STRUCT *)mb->data)->
1848 trace_config = TRACE_INACTIVE;
1849 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
1850 }
1851
1852 chdlc_priv_area->TracingEnabled = 0;
1853 chdlc_udp_pkt->cblock.return_code = COMMAND_OK;
1854 mb->buffer_length = 0;
1855 break;
1856
1857
1858 case CPIPE_GET_TRACE_INFO:
1859
1860 if (!chdlc_priv_area->TracingEnabled) {
1861 chdlc_udp_pkt->cblock.return_code = 1;
1862 mb->buffer_length = 0;
1863 break;
1864 }
1865
1866 chdlc_udp_pkt->trace_info.ismoredata = 0x00;
1867 buffer_length = 0; /* offset of packet already occupied */
1868
1869 for (frames=0; frames < chdlc_priv_area->number_trace_elements; frames++){
1870
1871 trace_pkt_t *trace_pkt = (trace_pkt_t *)
1872 &chdlc_udp_pkt->data[buffer_length];
1873
1874 sdla_peek(&card->hw, chdlc_priv_area->curr_trace_addr,
1875 (unsigned char *)&trace_element_struct,
1876 sizeof(TRACE_STATUS_ELEMENT_STRUCT));
1877
1878 if (trace_element_struct.opp_flag == 0x00) {
1879 break;
1880 }
1881
1882 /* get pointer to real data */
1883 data_ptr = trace_element_struct.ptr_data_bfr;
1884
1885 /* See if there is actual data on the trace buffer */
1886 if (data_ptr){
1887 data_length = trace_element_struct.trace_length;
1888 }else{
1889 data_length = 0;
1890 chdlc_udp_pkt->trace_info.ismoredata = 0x01;
1891 }
1892
1893 if( (chdlc_priv_area->available_buffer_space - buffer_length)
1894 < ( sizeof(trace_pkt_t) + data_length) ) {
1895
1896 /* indicate there are more frames on board & exit */
1897 chdlc_udp_pkt->trace_info.ismoredata = 0x01;
1898 break;
1899 }
1900
1901 trace_pkt->status = trace_element_struct.trace_type;
1902
1903 trace_pkt->time_stamp =
1904 trace_element_struct.trace_time_stamp;
1905
1906 trace_pkt->real_length =
1907 trace_element_struct.trace_length;
1908
1909 /* see if we can fit the frame into the user buffer */
1910 real_len = trace_pkt->real_length;
1911
1912 if (data_ptr == 0) {
1913 trace_pkt->data_avail = 0x00;
1914 } else {
1915 unsigned tmp = 0;
1916
1917 /* get the data from circular buffer
1918 must check for end of buffer */
1919 trace_pkt->data_avail = 0x01;
1920
1921 if ((data_ptr + real_len) >
1922 chdlc_priv_area->end_addr_trace_buffer + 1){
1923
1924 tmp = chdlc_priv_area->end_addr_trace_buffer - data_ptr + 1;
1925 sdla_peek(&card->hw, data_ptr,
1926 trace_pkt->data,tmp);
1927 data_ptr = chdlc_priv_area->base_addr_trace_buffer;
1928 }
1929
1930 sdla_peek(&card->hw, data_ptr,
1931 &trace_pkt->data[tmp], real_len - tmp);
1932 }
1933
1934 /* zero the opp flag to show we got the frame */
1935 ut_char = 0x00;
1936 sdla_poke(&card->hw, chdlc_priv_area->curr_trace_addr, &ut_char, 1);
1937
1938 /* now move onto the next frame */
1939 chdlc_priv_area->curr_trace_addr += sizeof(TRACE_STATUS_ELEMENT_STRUCT);
1940
1941 /* check if we went over the last address */
1942 if ( chdlc_priv_area->curr_trace_addr > chdlc_priv_area->end_trace_addr ) {
1943 chdlc_priv_area->curr_trace_addr = chdlc_priv_area->start_trace_addr;
1944 }
1945
1946 if(trace_pkt->data_avail == 0x01) {
1947 buffer_length += real_len - 1;
1948 }
1949
1950 /* for the header */
1951 buffer_length += sizeof(trace_pkt_t);
1952
1953 } /* For Loop */
1954
1955 if (frames == chdlc_priv_area->number_trace_elements){
1956 chdlc_udp_pkt->trace_info.ismoredata = 0x01;
1957 }
1958 chdlc_udp_pkt->trace_info.num_frames = frames;
1959
1960 mb->buffer_length = buffer_length;
1961 chdlc_udp_pkt->cblock.buffer_length = buffer_length;
1962
1963 chdlc_udp_pkt->cblock.return_code = COMMAND_OK;
1964
1965 break;
1966
1967
1968 case CPIPE_FT1_READ_STATUS:
1969 ((unsigned char *)chdlc_udp_pkt->data )[0] =
1970 flags->FT1_info_struct.parallel_port_A_input;
1971
1972 ((unsigned char *)chdlc_udp_pkt->data )[1] =
1973 flags->FT1_info_struct.parallel_port_B_input;
1974
1975 chdlc_udp_pkt->cblock.return_code = COMMAND_OK;
1976 mb->buffer_length = 2;
1977 break;
1978
1979 case CPIPE_ROUTER_UP_TIME:
1980 do_gettimeofday( &tv );
1981 chdlc_priv_area->router_up_time = tv.tv_sec -
1982 chdlc_priv_area->router_start_time;
1983 *(unsigned long *)&chdlc_udp_pkt->data =
1984 chdlc_priv_area->router_up_time;
1985 mb->buffer_length = sizeof(unsigned long);
1986 break;
1987
1988 case FT1_MONITOR_STATUS_CTRL:
1989 /* Enable FT1 MONITOR STATUS */
1990 if ((chdlc_udp_pkt->data[0] & ENABLE_READ_FT1_STATUS) ||
1991 (chdlc_udp_pkt->data[0] & ENABLE_READ_FT1_OP_STATS)) {
1992
1993 if( rCount++ != 0 ) {
1994 chdlc_udp_pkt->cblock.
1995 return_code = COMMAND_OK;
1996 mb->buffer_length = 1;
1997 break;
1998 }
1999 }
2000
2001 /* Disable FT1 MONITOR STATUS */
2002 if( chdlc_udp_pkt->data[0] == 0) {
2003
2004 if( --rCount != 0) {
2005 chdlc_udp_pkt->cblock.
2006 return_code = COMMAND_OK;
2007 mb->buffer_length = 1;
2008 break;
2009 }
2010 }
2011
2012 default:
2013 /* it's a board command */
2014 mb->command = chdlc_udp_pkt->cblock.command;
2015 mb->buffer_length = chdlc_udp_pkt->cblock.buffer_length;
2016 if (mb->buffer_length) {
2017 memcpy(&mb->data, (unsigned char *) chdlc_udp_pkt->
2018 data, mb->buffer_length);
2019 }
2020 /* run the command on the board */
2021 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
2022 if (err != COMMAND_OK) {
2023 break;
2024 }
2025
2026 /* copy the result back to our buffer */
2027 memcpy(&chdlc_udp_pkt->cblock, mb, sizeof(cblock_t));
2028
2029 if (mb->buffer_length) {
2030 memcpy(&chdlc_udp_pkt->data, &mb->data,
2031 mb->buffer_length);
2032 }
2033
2034 } /* end of switch */
2035 } /* end of else */
2036
2037 /* Fill UDP TTL */
2038 chdlc_udp_pkt->ip_pkt.ttl = card->wandev.ttl;
2039
2040 len = reply_udp(chdlc_priv_area->udp_pkt_data, mb->buffer_length);
2041
2042 if(chdlc_priv_area->udp_pkt_src == UDP_PKT_FRM_NETWORK) {
2043 if(!chdlc_send(card, chdlc_priv_area->udp_pkt_data, len)) {
2044 ++ card->wandev.stats.tx_packets;
2045 card->wandev.stats.tx_bytes += len;
2046 }
2047 } else {
2048
2049 /* Pass it up the stack
2050 Allocate socket buffer */
2051 if ((new_skb = dev_alloc_skb(len)) != NULL) {
2052 /* copy data into new_skb */
2053
2054 buf = skb_put(new_skb, len);
2055 memcpy(buf, chdlc_priv_area->udp_pkt_data, len);
2056
2057 /* Decapsulate pkt and pass it up the protocol stack */
2058 new_skb->protocol = htons(ETH_P_IP);
2059 new_skb->dev = dev;
2060 new_skb->mac.raw = new_skb->data;
2061
2062 netif_rx(new_skb);
2063 dev->last_rx = jiffies;
2064 } else {
2065
2066 printk(KERN_INFO "%s: no socket buffers available!\n",
2067 card->devname);
2068 }
2069 }
2070
2071 chdlc_priv_area->udp_pkt_lgth = 0;
2072
2073 return 0;
2074}
2075
2076/*============================================================================
2077 * Initialize Receive and Transmit Buffers.
2078 */
2079
2080static void init_chdlc_tx_rx_buff(sdla_t* card, struct net_device *dev)
2081{
2082 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
2083 CHDLC_TX_STATUS_EL_CFG_STRUCT *tx_config;
2084 CHDLC_RX_STATUS_EL_CFG_STRUCT *rx_config;
2085 char err;
2086
2087 mb->buffer_length = 0;
2088 mb->command = READ_CHDLC_CONFIGURATION;
2089 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
2090
2091 if(err != COMMAND_OK) {
2092 chdlc_error(card,err,mb);
2093 return;
2094 }
2095
2096 if(card->hw.type == SDLA_S514) {
2097 tx_config = (CHDLC_TX_STATUS_EL_CFG_STRUCT *)(card->hw.dpmbase +
2098 (((CHDLC_CONFIGURATION_STRUCT *)mb->data)->
2099 ptr_CHDLC_Tx_stat_el_cfg_struct));
2100 rx_config = (CHDLC_RX_STATUS_EL_CFG_STRUCT *)(card->hw.dpmbase +
2101 (((CHDLC_CONFIGURATION_STRUCT *)mb->data)->
2102 ptr_CHDLC_Rx_stat_el_cfg_struct));
2103
2104 /* Setup Head and Tails for buffers */
2105 card->u.c.txbuf_base = (void *)(card->hw.dpmbase +
2106 tx_config->base_addr_Tx_status_elements);
2107 card->u.c.txbuf_last =
2108 (CHDLC_DATA_TX_STATUS_EL_STRUCT *)
2109 card->u.c.txbuf_base +
2110 (tx_config->number_Tx_status_elements - 1);
2111
2112 card->u.c.rxbuf_base = (void *)(card->hw.dpmbase +
2113 rx_config->base_addr_Rx_status_elements);
2114 card->u.c.rxbuf_last =
2115 (CHDLC_DATA_RX_STATUS_EL_STRUCT *)
2116 card->u.c.rxbuf_base +
2117 (rx_config->number_Rx_status_elements - 1);
2118
2119 /* Set up next pointer to be used */
2120 card->u.c.txbuf = (void *)(card->hw.dpmbase +
2121 tx_config->next_Tx_status_element_to_use);
2122 card->u.c.rxmb = (void *)(card->hw.dpmbase +
2123 rx_config->next_Rx_status_element_to_use);
2124 }
2125 else {
2126 tx_config = (CHDLC_TX_STATUS_EL_CFG_STRUCT *)(card->hw.dpmbase +
2127 (((CHDLC_CONFIGURATION_STRUCT *)mb->data)->
2128 ptr_CHDLC_Tx_stat_el_cfg_struct % SDLA_WINDOWSIZE));
2129
2130 rx_config = (CHDLC_RX_STATUS_EL_CFG_STRUCT *)(card->hw.dpmbase +
2131 (((CHDLC_CONFIGURATION_STRUCT *)mb->data)->
2132 ptr_CHDLC_Rx_stat_el_cfg_struct % SDLA_WINDOWSIZE));
2133
2134 /* Setup Head and Tails for buffers */
2135 card->u.c.txbuf_base = (void *)(card->hw.dpmbase +
2136 (tx_config->base_addr_Tx_status_elements % SDLA_WINDOWSIZE));
2137 card->u.c.txbuf_last =
2138 (CHDLC_DATA_TX_STATUS_EL_STRUCT *)card->u.c.txbuf_base
2139 + (tx_config->number_Tx_status_elements - 1);
2140 card->u.c.rxbuf_base = (void *)(card->hw.dpmbase +
2141 (rx_config->base_addr_Rx_status_elements % SDLA_WINDOWSIZE));
2142 card->u.c.rxbuf_last =
2143 (CHDLC_DATA_RX_STATUS_EL_STRUCT *)card->u.c.rxbuf_base
2144 + (rx_config->number_Rx_status_elements - 1);
2145
2146 /* Set up next pointer to be used */
2147 card->u.c.txbuf = (void *)(card->hw.dpmbase +
2148 (tx_config->next_Tx_status_element_to_use % SDLA_WINDOWSIZE));
2149 card->u.c.rxmb = (void *)(card->hw.dpmbase +
2150 (rx_config->next_Rx_status_element_to_use % SDLA_WINDOWSIZE));
2151 }
2152
2153 /* Setup Actual Buffer Start and end addresses */
2154 card->u.c.rx_base = rx_config->base_addr_Rx_buffer;
2155 card->u.c.rx_top = rx_config->end_addr_Rx_buffer;
2156
2157}
2158
2159/*=============================================================================
2160 * Perform Interrupt Test by running READ_CHDLC_CODE_VERSION command MAX_INTR
2161 * _TEST_COUNTER times.
2162 */
2163static int intr_test( sdla_t* card)
2164{
2165 CHDLC_MAILBOX_STRUCT* mb = card->mbox;
2166 int err,i;
2167
2168 Intr_test_counter = 0;
2169
2170 /* The critical flag is unset because during initialization (if_open)
2171 * we want the interrupts to be enabled so that when the wpc_isr is
2172 * called it does not exit due to critical flag set.
2173 */
2174
2175 err = chdlc_set_intr_mode(card, APP_INT_ON_COMMAND_COMPLETE);
2176
2177 if (err == CMD_OK) {
2178 for (i = 0; i < MAX_INTR_TEST_COUNTER; i ++) {
2179 mb->buffer_length = 0;
2180 mb->command = READ_CHDLC_CODE_VERSION;
2181 err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
2182 }
2183 }
2184 else {
2185 return err;
2186 }
2187
2188 err = chdlc_set_intr_mode(card, 0);
2189
2190 if (err != CMD_OK)
2191 return err;
2192
2193 return 0;
2194}
2195
2196/*==============================================================================
2197 * Determine what type of UDP call it is. CPIPEAB ?
2198 */
2199static int udp_pkt_type(struct sk_buff *skb, sdla_t* card)
2200{
2201 chdlc_udp_pkt_t *chdlc_udp_pkt = (chdlc_udp_pkt_t *)skb->data;
2202
2203 if (!strncmp(chdlc_udp_pkt->wp_mgmt.signature,UDPMGMT_SIGNATURE,8) &&
2204 (chdlc_udp_pkt->udp_pkt.udp_dst_port == ntohs(card->wandev.udp_port)) &&
2205 (chdlc_udp_pkt->ip_pkt.protocol == UDPMGMT_UDP_PROTOCOL) &&
2206 (chdlc_udp_pkt->wp_mgmt.request_reply == UDPMGMT_REQUEST)) {
2207 return UDP_CPIPE_TYPE;
2208 }
2209 else return UDP_INVALID_TYPE;
2210}
2211
2212/*============================================================================
2213 * Set PORT state.
2214 */
2215static void port_set_state (sdla_t *card, int state)
2216{
2217 struct net_device *dev = card->wandev.dev;
2218 chdlc_private_area_t *chdlc_priv_area = dev->priv;
2219
2220 if (card->u.c.state != state)
2221 {
2222 switch (state)
2223 {
2224 case WAN_CONNECTED:
2225 printk (KERN_INFO "%s: HDLC link connected!\n",
2226 card->devname);
2227 break;
2228
2229 case WAN_CONNECTING:
2230 printk (KERN_INFO "%s: HDLC link connecting...\n",
2231 card->devname);
2232 break;
2233
2234 case WAN_DISCONNECTED:
2235 printk (KERN_INFO "%s: HDLC link disconnected!\n",
2236 card->devname);
2237 break;
2238 }
2239
2240 card->wandev.state = card->u.c.state = state;
2241 chdlc_priv_area->common.state = state;
2242 }
2243}
2244
2245void s508_lock (sdla_t *card, unsigned long *smp_flags)
2246{
2247 spin_lock_irqsave(&card->wandev.lock, *smp_flags);
2248 if (card->next){
2249 /* It is ok to use spin_lock here, since we
2250 * already turned off interrupts */
2251 spin_lock(&card->next->wandev.lock);
2252 }
2253}
2254
2255void s508_unlock (sdla_t *card, unsigned long *smp_flags)
2256{
2257 if (card->next){
2258 spin_unlock(&card->next->wandev.lock);
2259 }
2260 spin_unlock_irqrestore(&card->wandev.lock, *smp_flags);
2261}
2262
2263
2264
2265/*===========================================================================
2266 * config_chdlc
2267 *
2268 * Configure the chdlc protocol and enable communications.
2269 *
2270 * The if_open() function binds this function to the poll routine.
2271 * Therefore, this function will run every time the chdlc interface
2272 * is brought up. We cannot run this function from the if_open
2273 * because if_open does not have access to the remote IP address.
2274 *
2275 * If the communications are not enabled, proceed to configure
2276 * the card and enable communications.
2277 *
2278 * If the communications are enabled, it means that the interface
2279 * was shutdown by ether the user or driver. In this case, we
2280 * have to check that the IP addresses have not changed. If
2281 * the IP addresses have changed, we have to reconfigure the firmware
2282 * and update the changed IP addresses. Otherwise, just exit.
2283 *
2284 */
2285
2286static int config_chdlc (sdla_t *card)
2287{
2288 struct net_device *dev = card->wandev.dev;
2289 SHARED_MEMORY_INFO_STRUCT *flags = card->u.c.flags;
2290
2291 if (card->u.c.comm_enabled){
2292 chdlc_comm_disable(card);
2293 port_set_state(card, WAN_DISCONNECTED);
2294 }
2295
2296 if (set_chdlc_config(card)) {
2297 printk(KERN_INFO "%s: CHDLC Configuration Failed!\n",
2298 card->devname);
2299 return 0;
2300 }
2301 init_chdlc_tx_rx_buff(card, dev);
2302
2303 /* Set interrupt mode and mask */
2304 if (chdlc_set_intr_mode(card, APP_INT_ON_RX_FRAME |
2305 APP_INT_ON_GLOBAL_EXCEP_COND |
2306 APP_INT_ON_TX_FRAME |
2307 APP_INT_ON_CHDLC_EXCEP_COND | APP_INT_ON_TIMER)){
2308 printk (KERN_INFO "%s: Failed to set interrupt triggers!\n",
2309 card->devname);
2310 return 0;
2311 }
2312
2313
2314 /* Mask the Transmit and Timer interrupt */
2315 flags->interrupt_info_struct.interrupt_permission &=
2316 ~(APP_INT_ON_TX_FRAME | APP_INT_ON_TIMER);
2317
2318
2319 if (chdlc_comm_enable(card) != 0) {
2320 printk(KERN_INFO "%s: Failed to enable chdlc communications!\n",
2321 card->devname);
2322 flags->interrupt_info_struct.interrupt_permission = 0;
2323 card->u.c.comm_enabled=0;
2324 chdlc_set_intr_mode(card,0);
2325 return 0;
2326 }
2327
2328 /* Initialize Rx/Tx buffer control fields */
2329 port_set_state(card, WAN_CONNECTING);
2330 return 0;
2331}
2332
2333
2334static void send_ppp_term_request(struct net_device *dev)
2335{
2336 struct sk_buff *new_skb;
2337 unsigned char *buf;
2338
2339 if ((new_skb = dev_alloc_skb(8)) != NULL) {
2340 /* copy data into new_skb */
2341
2342 buf = skb_put(new_skb, 8);
2343 sprintf(buf,"%c%c%c%c%c%c%c%c", 0xFF,0x03,0xC0,0x21,0x05,0x98,0x00,0x07);
2344
2345 /* Decapsulate pkt and pass it up the protocol stack */
2346 new_skb->protocol = htons(ETH_P_WAN_PPP);
2347 new_skb->dev = dev;
2348 new_skb->mac.raw = new_skb->data;
2349
2350 netif_rx(new_skb);
2351 dev->last_rx = jiffies;
2352 }
2353}
2354
2355
2356MODULE_LICENSE("GPL");
2357
2358/****** End ****************************************************************/