40 files changed, 165 insertions, 117 deletions

diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 7edf6d913c13..765fd1c56cd6 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -688,14 +688,6 @@ void __init acpi_early_init(void)
         if (acpi_disabled)
                 return;
 
-        /*
-         * ACPI CA initializes acpi_dbg_level to non-zero, which means
-         * we get debug output merely by turning on CONFIG_ACPI_DEBUG.
-         * Turn it off so we don't get output unless the user specifies
-         * acpi.debug_level.
-         */
-        acpi_dbg_level = 0;
-
         printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION);
 
         /* enable workarounds, unless strict ACPI spec. compliance */
diff --git a/drivers/acpi/utilities/utglobal.c b/drivers/acpi/utilities/utglobal.c
index 670551b95e56..17ed5ac840f7 100644
--- a/drivers/acpi/utilities/utglobal.c
+++ b/drivers/acpi/utilities/utglobal.c
@@ -64,7 +64,7 @@ u32 acpi_dbg_level = ACPI_DEBUG_DEFAULT;
 
 /* Debug switch - layer (component) mask */
 
-u32 acpi_dbg_layer = ACPI_COMPONENT_DEFAULT | ACPI_ALL_DRIVERS;
+u32 acpi_dbg_layer = 0;
 u32 acpi_gbl_nesting_level = 0;
 
 /* Debugger globals */
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 9364dc554257..9f7c543cc04b 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1693,6 +1693,11 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time)
         for (i = 0; i <= h->highest_lun; i++) {
                 int j;
                 drv_found = 0;
+
+                /* skip holes in the array from already deleted drives */
+                if (h->drv[i].raid_level == -1)
+                        continue;
+
                 for (j = 0; j < num_luns; j++) {
                         memcpy(&lunid, &ld_buff->LUN[j][0], 4);
                         lunid = le32_to_cpu(lunid);
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index 5fcd3d89c75d..4041e9143283 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -394,6 +394,12 @@ static void edac_device_workq_function(struct work_struct *work_req)
 
         mutex_lock(&device_ctls_mutex);
 
+        /* If we are being removed, bail out immediately */
+        if (edac_dev->op_state == OP_OFFLINE) {
+                mutex_unlock(&device_ctls_mutex);
+                return;
+        }
+
         /* Only poll controllers that are running polled and have a check */
         if ((edac_dev->op_state == OP_RUNNING_POLL) &&
                 (edac_dev->edac_check != NULL)) {
@@ -585,14 +591,14 @@ struct edac_device_ctl_info *edac_device_del_device(struct device *dev)
         /* mark this instance as OFFLINE */
         edac_dev->op_state = OP_OFFLINE;
 
-        /* clear workq processing on this instance */
-        edac_device_workq_teardown(edac_dev);
-
         /* deregister from global list */
         del_edac_device_from_global_list(edac_dev);
 
         mutex_unlock(&device_ctls_mutex);
 
+        /* clear workq processing on this instance */
+        edac_device_workq_teardown(edac_dev);
+
         /* Tear down the sysfs entries for this instance */
         edac_device_remove_sysfs(edac_dev);
 
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 553dd4bc3075..afa8a12cd009 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -717,7 +717,7 @@ static int i915_getparam(struct drm_device *dev, void *data,
                 value = dev->pci_device;
                 break;
         case I915_PARAM_HAS_GEM:
-                value = 1;
+                value = dev_priv->has_gem;
                 break;
         default:
                 DRM_ERROR("Unknown parameter %d\n", param->param);
@@ -830,6 +830,14 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 
         dev_priv->regs = ioremap(base, size);
 
+#ifdef CONFIG_HIGHMEM64G
+        /* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */
+        dev_priv->has_gem = 0;
+#else
+        /* enable GEM by default */
+        dev_priv->has_gem = 1;
+#endif
+
         i915_gem_load(dev);
 
         /* Init HWS */
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index adc972cc6bfc..b3cc4731aa7c 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -106,6 +106,8 @@ struct intel_opregion {
 typedef struct drm_i915_private {
         struct drm_device *dev;
 
+        int has_gem;
+
         void __iomem *regs;
         drm_local_map_t *sarea;
 
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ad672d854828..24fe8c10b4b2 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2309,7 +2309,14 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data,
         }
 
         obj_priv = obj->driver_private;
-        args->busy = obj_priv->active;
+        /* Don't count being on the flushing list against the object being
+         * done.  Otherwise, a buffer left on the flushing list but not getting
+         * flushed (because nobody's flushing that domain) won't ever return
+         * unbusy and get reused by libdrm's bo cache.  The other expected
+         * consumer of this interface, OpenGL's occlusion queries, also specs
+         * that the objects get unbusy "eventually" without any interference.
+         */
+        args->busy = obj_priv->active && obj_priv->last_rendering_seqno != 0;
 
         drm_gem_object_unreference(obj);
         mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c
index 99be11418ac2..8289e16419a8 100644
--- a/drivers/gpu/drm/radeon/radeon_irq.c
+++ b/drivers/gpu/drm/radeon/radeon_irq.c
@@ -44,7 +44,7 @@ void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state)
         else
                 dev_priv->irq_enable_reg &= ~mask;
 
-        if (!dev->irq_enabled)
+        if (dev->irq_enabled)
                 RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
 }
 
@@ -57,7 +57,7 @@ static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state)
         else
                 dev_priv->r500_disp_irq_reg &= ~mask;
 
-        if (!dev->irq_enabled)
+        if (dev->irq_enabled)
                 RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg);
 }
 
diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c
index 53f079cc00af..d8ede85fe17f 100644
--- a/drivers/ide/cs5530.c
+++ b/drivers/ide/cs5530.c
@@ -81,11 +81,12 @@ static u8 cs5530_udma_filter(ide_drive_t *drive)
 {
         ide_hwif_t *hwif = drive->hwif;
         ide_drive_t *mate = ide_get_pair_dev(drive);
-        u16 *mateid = mate->id;
+        u16 *mateid;
         u8 mask = hwif->ultra_mask;
 
         if (mate == NULL)
                 goto out;
+        mateid = mate->id;
 
         if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
                 if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c
index f1a8758e3a99..ec7f766ef5e4 100644
--- a/drivers/ide/sc1200.c
+++ b/drivers/ide/sc1200.c
@@ -104,11 +104,12 @@ static u8 sc1200_udma_filter(ide_drive_t *drive)
 {
         ide_hwif_t *hwif = drive->hwif;
         ide_drive_t *mate = ide_get_pair_dev(drive);
-        u16 *mateid = mate->id;
+        u16 *mateid;
         u8 mask = hwif->ultra_mask;
 
         if (mate == NULL)
                 goto out;
+        mateid = mate->id;
 
         if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
                 if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index ac89a5deaca2..ab7c8e4a61f9 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -208,16 +208,19 @@ static void bitmap_checkfree(struct bitmap *bitmap, unsigned long page)
  */
 
 /* IO operations when bitmap is stored near all superblocks */
-static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long index)
+static struct page *read_sb_page(mddev_t *mddev, long offset,
+                                 struct page *page,
+                                 unsigned long index, int size)
 {
         /* choose a good rdev and read the page from there */
 
         mdk_rdev_t *rdev;
         struct list_head *tmp;
-        struct page *page = alloc_page(GFP_KERNEL);
         sector_t target;
 
         if (!page)
+                page = alloc_page(GFP_KERNEL);
+        if (!page)
                 return ERR_PTR(-ENOMEM);
 
         rdev_for_each(rdev, tmp, mddev) {
@@ -227,7 +230,9 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long inde
 
                 target = rdev->sb_start + offset + index * (PAGE_SIZE/512);
 
-                if (sync_page_io(rdev->bdev, target, PAGE_SIZE, page, READ)) {
+                if (sync_page_io(rdev->bdev, target,
+                                 roundup(size, bdev_hardsect_size(rdev->bdev)),
+                                 page, READ)) {
                         page->index = index;
                         attach_page_buffers(page, NULL); /* so that free_buffer will
                                                           * quietly no-op */
@@ -544,7 +549,9 @@ static int bitmap_read_sb(struct bitmap *bitmap)
 
                 bitmap->sb_page = read_page(bitmap->file, 0, bitmap, bytes);
         } else {
-                bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, 0);
+                bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset,
+                                               NULL,
+                                               0, sizeof(bitmap_super_t));
         }
         if (IS_ERR(bitmap->sb_page)) {
                 err = PTR_ERR(bitmap->sb_page);
@@ -957,11 +964,16 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
                                  */
                                 page = bitmap->sb_page;
                                 offset = sizeof(bitmap_super_t);
+                                read_sb_page(bitmap->mddev, bitmap->offset,
+                                             page,
+                                             index, count);
                         } else if (file) {
                                 page = read_page(file, index, bitmap, count);
                                 offset = 0;
                         } else {
-                                page = read_sb_page(bitmap->mddev, bitmap->offset, index);
+                                page = read_sb_page(bitmap->mddev, bitmap->offset,
+                                                    NULL,
+                                                    index, count);
                                 offset = 0;
                         }
                         if (IS_ERR(page)) { /* read error */
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index 73dc2ee9b014..b34301d56cd2 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -9,11 +9,11 @@ config DVB_B2C2_FLEXCOP
         select DVB_STV0297 if !DVB_FE_CUSTOMISE
         select DVB_BCM3510 if !DVB_FE_CUSTOMISE
         select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
         select DVB_S5H1420 if !DVB_FE_CUSTOMISE
         select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE
         select DVB_ISL6421 if !DVB_FE_CUSTOMISE
         select DVB_CX24123 if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
         help
           Support for the digital TV receiver chip made by B2C2 Inc. included in
           Technisats PCI cards and USB boxes.
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index a127a4175c40..5cded3708541 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -628,12 +628,14 @@ int flexcop_frontend_init(struct flexcop_device *fc)
         }
 
         /* try the cable dvb (stv0297) */
+        fc->fc_i2c_adap[0].no_base_addr = 1;
         fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
         if (fc->fe != NULL) {
                 fc->dev_type = FC_CABLE;
                 fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
                 goto fe_found;
         }
+        fc->fc_i2c_adap[0].no_base_addr = 0;
 
         /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
         fc->fe = dvb_attach(mt312_attach,
diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c
index 43a112ec6d44..f13783f08f0f 100644
--- a/drivers/media/dvb/b2c2/flexcop-i2c.c
+++ b/drivers/media/dvb/b2c2/flexcop-i2c.c
@@ -47,9 +47,13 @@ static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c,
         int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
                 ret;
 
-        r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
         ret = flexcop_i2c_operation(i2c->fc, &r100);
         if (ret != 0) {
+                deb_i2c("Retrying operation\n");
+                r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
+                ret = flexcop_i2c_operation(i2c->fc, &r100);
+        }
+        if (ret != 0) {
                 deb_i2c("read failed. %d\n", ret);
                 return ret;
         }
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
index 7e9c090fc04e..27edb0ece587 100644
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ b/drivers/media/dvb/bt8xx/Kconfig
@@ -8,7 +8,7 @@ config DVB_BT8XX
         select DVB_OR51211 if !DVB_FE_CUSTOMISE
         select DVB_LGDT330X if !DVB_FE_CUSTOMISE
         select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
         help
           Support for PCI cards based on the Bt8xx PCI bridge. Examples are
           the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 62b68c291d99..49f7b20c25d6 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -24,8 +24,8 @@ config DVB_USB_A800
         tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
         depends on DVB_USB
         select DVB_DIB3000MC
-        select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
         select DVB_PLL if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
         help
           Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
 
@@ -34,7 +34,7 @@ config DVB_USB_DIBUSB_MB
         depends on DVB_USB
         select DVB_PLL if !DVB_FE_CUSTOMISE
         select DVB_DIB3000MB
-        select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
         help
           Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
           DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
@@ -55,7 +55,7 @@ config DVB_USB_DIBUSB_MC
         tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
         depends on DVB_USB
         select DVB_DIB3000MC
-        select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
         help
           Support for USB2.0 DVB-T receivers based on reference designs made by
           DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
@@ -73,11 +73,11 @@ config DVB_USB_DIB0700
         select DVB_DIB7000M
         select DVB_DIB3000MC
         select DVB_S5H1411 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
         select DVB_TUNER_DIB0070
+        select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
+        select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMIZE
+        select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
+        select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE
         help
           Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
           USB bridge is also present in devices having the DiB7700 DVB-T-USB
@@ -95,7 +95,7 @@ config DVB_USB_UMT_010
         depends on DVB_USB
         select DVB_PLL if !DVB_FE_CUSTOMISE
         select DVB_DIB3000MC
-        select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
         help
           Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
 
@@ -107,11 +107,11 @@ config DVB_USB_CXUSB
         select DVB_LGDT330X if !DVB_FE_CUSTOMISE
         select DVB_MT352 if !DVB_FE_CUSTOMISE
         select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
         select DVB_DIB7000P if !DVB_FE_CUSTOMISE
         select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
+        select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
+        select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
         help
           Say Y here to support the Conexant USB2.0 hybrid reference design.
           Currently, only DVB and ATSC modes are supported, analog mode
@@ -124,9 +124,9 @@ config DVB_USB_M920X
         tristate "Uli m920x DVB-T USB2.0 support"
         depends on DVB_USB
         select DVB_MT352 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
         select DVB_TDA1004X if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
+        select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
         help
           Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
           Currently, only devices with a product id of
@@ -137,7 +137,7 @@ config DVB_USB_GL861
         tristate "Genesys Logic GL861 USB2.0 support"
         depends on DVB_USB
         select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
         help
           Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0
           receiver with USB ID 0db0:5581.
@@ -146,7 +146,7 @@ config DVB_USB_AU6610
         tristate "Alcor Micro AU6610 USB2.0 support"
         depends on DVB_USB
         select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
         help
           Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
 
@@ -198,8 +198,8 @@ config DVB_USB_NOVA_T_USB2
         tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
         depends on DVB_USB
         select DVB_DIB3000MC
-        select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
         select DVB_PLL if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
         help
           Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
 
@@ -235,8 +235,8 @@ config DVB_USB_OPERA1
 config DVB_USB_AF9005
         tristate "Afatech AF9005 DVB-T USB1.1 support"
         depends on DVB_USB && EXPERIMENTAL
-        select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
+        select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
         help
           Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver
           and the TerraTec Cinergy T USB XE (Rev.1)
@@ -284,7 +284,7 @@ config DVB_USB_DTV5100
         tristate "AME DTV-5100 USB2.0 DVB-T support"
         depends on DVB_USB
         select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
         help
           Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
 
@@ -293,9 +293,9 @@ config DVB_USB_AF9015
         depends on DVB_USB && EXPERIMENTAL
         select DVB_AF9013
         select DVB_PLL              if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_MT2060   if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_QT1010   if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_MT2060   if !MEDIA_TUNER_CUSTOMIZE
+        select MEDIA_TUNER_QT1010   if !MEDIA_TUNER_CUSTOMIZE
+        select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMIZE
+        select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
         help
           Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index f28d3ae59e04..391732788911 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -446,13 +446,13 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
                 == NULL ? -ENODEV : 0;
 }
 
-#define DEFAULT_RC_INTERVAL 150
+#define DEFAULT_RC_INTERVAL 50
 
 static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
 
 /* Number of keypresses to ignore before start repeating */
-#define RC_REPEAT_DELAY 2
-#define RC_REPEAT_DELAY_V1_20 5
+#define RC_REPEAT_DELAY 6
+#define RC_REPEAT_DELAY_V1_20 10
 
 
 
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 867027ceab3e..401a04effc06 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -106,7 +106,7 @@ config DVB_BUDGET_CI
         select DVB_TDA1004X if !DVB_FE_CUSTOMISE
         select DVB_LNBP21 if !DVB_FE_CUSTOMISE
         select DVB_TDA10023 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
         select VIDEO_IR
         help
           Support for simple SAA7146 based DVB cards
diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c
index e6ca4012b5f0..0ea85a05e5c0 100644
--- a/drivers/media/video/compat_ioctl32.c
+++ b/drivers/media/video/compat_ioctl32.c
@@ -831,7 +831,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 {
         int ret = -ENOIOCTLCMD;
 
-        if (!file->f_op->ioctl)
+        if (!file->f_op->ioctl && !file->f_op->unlocked_ioctl)
                 return ret;
 
         switch (cmd) {
diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index ef48565de7f1..8940b5387dec 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -9,7 +9,7 @@ config VIDEO_CX18
         select VIDEO_CX2341X
         select VIDEO_CS5345
         select DVB_S5H1409 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
         ---help---
           This is a video4linux driver for Conexant cx23418 based
           PCI combo video recorder devices.
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index 8c1b7fa47a41..00f1e2e8889e 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -11,16 +11,16 @@ config VIDEO_CX23885
         select VIDEO_CX25840
         select VIDEO_CX2341X
         select DVB_DIB7000P if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_MT2131 if !DVB_FE_CUSTOMISE
         select DVB_S5H1409 if !DVB_FE_CUSTOMISE
         select DVB_S5H1411 if !DVB_FE_CUSTOMISE
         select DVB_LGDT330X if !DVB_FE_CUSTOMISE
         select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+        select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
+        select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMIZE
         select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE
         select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
         select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
         select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
-        select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
         ---help---
           This is a video4linux driver for Conexant 23885 based
           TV cards.
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 0b9e5fac6239..b0f837588e01 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -56,12 +56,12 @@ config VIDEO_CX88_DVB
         select DVB_NXT200X if !DVB_FE_CUSTOMISE
         select DVB_CX24123 if !DVB_FE_CUSTOMISE
         select DVB_ISL6421 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
         select DVB_S5H1411 if !DVB_FE_CUSTOMISE
         select DVB_CX24116 if !DVB_FE_CUSTOMISE
         select DVB_STV0299 if !DVB_FE_CUSTOMISE
         select DVB_STV0288 if !DVB_FE_CUSTOMISE
         select DVB_STB6000 if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
         ---help---
           This adds support for DVB/ATSC cards based on the
           Conexant 2388x chip.
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 610f535a257c..4ea1f1e04897 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -549,10 +549,11 @@ static int em28xx_config(struct em28xx *dev)
 static void em28xx_config_i2c(struct em28xx *dev)
 {
         struct v4l2_routing route;
+        int zero = 0;
 
         route.input = INPUT(dev->ctl_input)->vmux;
         route.output = 0;
-        em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, NULL);
+        em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, &zero);
         em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route);
         em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL);
 }
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 748a87e82e44..02a6e9ef0337 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1264,10 +1264,10 @@ static int vidioc_s_jpegcomp(struct file *file, void *priv,
         struct gspca_dev *gspca_dev = priv;
         int ret;
 
-        if (mutex_lock_interruptible(&gspca_dev->usb_lock))
-                return -ERESTARTSYS;
         if (!gspca_dev->sd_desc->set_jcomp)
                 return -EINVAL;
+        if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+                return -ERESTARTSYS;
         ret = gspca_dev->sd_desc->set_jcomp(gspca_dev, jpegcomp);
         mutex_unlock(&gspca_dev->usb_lock);
         return ret;
diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig
index 19eb274c9cd0..854c2a885358 100644
--- a/drivers/media/video/pvrusb2/Kconfig
+++ b/drivers/media/video/pvrusb2/Kconfig
@@ -42,7 +42,7 @@ config VIDEO_PVRUSB2_DVB
         select DVB_S5H1411 if !DVB_FE_CUSTOMISE
         select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
         select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
-        select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
         select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
         ---help---
 
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 7021bbf5897b..fc2164e28e76 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -34,9 +34,9 @@ config VIDEO_SAA7134_DVB
         select DVB_NXT200X if !DVB_FE_CUSTOMISE
         select DVB_TDA10086 if !DVB_FE_CUSTOMISE
         select DVB_TDA826X if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
         select DVB_ISL6421 if !DVB_FE_CUSTOMISE
-        select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+        select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
+        select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
         ---help---
           This adds support for DVB cards based on the
           Philips saa7134 chip.
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index d62fd4f6b52e..ee090413e598 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2008,6 +2008,9 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt)
                 return FAILED;
         }
 
+        /* make sure we have no outstanding commands at this stage */
+        mptscsih_flush_running_cmds(hd);
+
         ioc = hd->ioc;
         printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
             ioc->name, SCpnt);
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 7e857e938adb..714a23035de1 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -116,6 +116,7 @@ struct ppp {
         unsigned long   last_xmit;      /* jiffies when last pkt sent 9c */
         unsigned long   last_recv;      /* jiffies when last pkt rcvd a0 */
         struct net_device *dev;         /* network interface device a4 */
+        int             closing;        /* is device closing down? a8 */
 #ifdef CONFIG_PPP_MULTILINK
         int             nxchan;         /* next channel to send something on */
         u32             nxseq;          /* next sequence number to send */
@@ -995,7 +996,7 @@ ppp_xmit_process(struct ppp *ppp)
         struct sk_buff *skb;
 
         ppp_xmit_lock(ppp);
-        if (ppp->dev) {
+        if (!ppp->closing) {
                 ppp_push(ppp);
                 while (!ppp->xmit_pending
                        && (skb = skb_dequeue(&ppp->file.xq)))
@@ -1463,8 +1464,7 @@ static inline void
 ppp_do_recv(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
 {
         ppp_recv_lock(ppp);
-        /* ppp->dev == 0 means interface is closing down */
-        if (ppp->dev)
+        if (!ppp->closing)
                 ppp_receive_frame(ppp, skb, pch);
         else
                 kfree_skb(skb);
@@ -2498,18 +2498,16 @@ init_ppp_file(struct ppp_file *pf, int kind)
  */
 static void ppp_shutdown_interface(struct ppp *ppp)
 {
-        struct net_device *dev;
-
         mutex_lock(&all_ppp_mutex);
-        ppp_lock(ppp);
-        dev = ppp->dev;
-        ppp->dev = NULL;
-        ppp_unlock(ppp);
         /* This will call dev_close() for us. */
-        if (dev) {
-                unregister_netdev(dev);
-                free_netdev(dev);
-        }
+        ppp_lock(ppp);
+        if (!ppp->closing) {
+                ppp->closing = 1;
+                ppp_unlock(ppp);
+                unregister_netdev(ppp->dev);
+        } else
+                ppp_unlock(ppp);
+
         cardmap_set(&all_ppp_units, ppp->file.index, NULL);
         ppp->file.dead = 1;
         ppp->owner = NULL;
@@ -2554,7 +2552,7 @@ static void ppp_destroy_interface(struct ppp *ppp)
         if (ppp->xmit_pending)
                 kfree_skb(ppp->xmit_pending);
 
-        kfree(ppp);
+        free_netdev(ppp->dev);
 }
 
 /*
@@ -2616,7 +2614,7 @@ ppp_connect_channel(struct channel *pch, int unit)
         if (pch->file.hdrlen > ppp->file.hdrlen)
                 ppp->file.hdrlen = pch->file.hdrlen;
         hdrlen = pch->file.hdrlen + 2;  /* for protocol bytes */
-        if (ppp->dev && hdrlen > ppp->dev->hard_header_len)
+        if (hdrlen > ppp->dev->hard_header_len)
                 ppp->dev->hard_header_len = hdrlen;
         list_add_tail(&pch->clist, &ppp->channels);
         ++ppp->n_channels;
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index f9e244da30ae..9bcb6cbd5aa9 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -113,7 +113,7 @@ struct acpiphp_slot {
 
         u8              device;         /* pci device# */
 
-        u32             sun;            /* ACPI _SUN (slot unique number) */
+        unsigned long long sun;         /* ACPI _SUN (slot unique number) */
         u32             flags;          /* see below */
 };
 
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 95b536a23d25..43c10bd261b4 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -337,7 +337,7 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot)
         slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
 
         acpiphp_slot->slot = slot;
-        snprintf(name, SLOT_NAME_SIZE, "%u", slot->acpi_slot->sun);
+        snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun);
 
         retval = pci_hp_register(slot->hotplug_slot,
                                         acpiphp_slot->bridge->pci_bus,
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 955aae4071f7..3affc6472e65 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -255,13 +255,13 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 
                 bridge->nr_slots++;
 
-                dbg("found ACPI PCI Hotplug slot %d at PCI %04x:%02x:%02x\n",
+                dbg("found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\n",
                                 slot->sun, pci_domain_nr(bridge->pci_bus),
                                 bridge->pci_bus->number, slot->device);
                 retval = acpiphp_register_hotplug_slot(slot);
                 if (retval) {
                         if (retval == -EBUSY)
-                                warn("Slot %d already registered by another "
+                                warn("Slot %llu already registered by another "
                                         "hotplug driver\n", slot->sun);
                         else
                                 warn("acpiphp_register_hotplug_slot failed "
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index c892daae74d6..633e743442ac 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -1402,10 +1402,6 @@ static int __init ibmphp_init(void)
                 goto error;
         }
 
-        /* lock ourselves into memory with a module 
-         * count of -1 so that no one can unload us. */
-        module_put(THIS_MODULE);
-
 exit:
         return rc;
 
@@ -1423,4 +1419,3 @@ static void __exit ibmphp_exit(void)
 }
 
 module_init(ibmphp_init);
-module_exit(ibmphp_exit);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 4b23bc39b11e..39cf248d24e3 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -432,18 +432,19 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_
                 goto err_out_release_ctlr;
         }
 
+        /* Check if slot is occupied */
         t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
-
-        t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */
-        if (value && pciehp_force) {
-                rc = pciehp_enable_slot(t_slot);
-                if (rc) /* -ENODEV: shouldn't happen, but deal with it */
-                        value = 0;
-        }
-        if ((POWER_CTRL(ctrl)) && !value) {
-                rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/
-                if (rc)
-                        goto err_out_free_ctrl_slot;
+        t_slot->hpc_ops->get_adapter_status(t_slot, &value);
+        if (value) {
+                if (pciehp_force)
+                        pciehp_enable_slot(t_slot);
+        } else {
+                /* Power off slot if not occupied */
+                if (POWER_CTRL(ctrl)) {
+                        rc = t_slot->hpc_ops->power_off_slot(t_slot);
+                        if (rc)
+                                goto err_out_free_ctrl_slot;
+                }
         }
 
         return 0;
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index dfc63d01f20a..aac7006949f1 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -252,7 +252,7 @@ static void report_resume(struct pci_dev *dev, void *data)
 
         if (!dev->driver ||
                 !dev->driver->err_handler ||
-                !dev->driver->err_handler->slot_reset)
+                !dev->driver->err_handler->resume)
                 return;
 
         err_handler = dev->driver->err_handler;
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index 2cd77ab8fc66..054e05294af8 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -328,6 +328,13 @@ isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
         int sr;
         u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
 
+        /* The clock has an 8 bit wide bcd-coded register (they never learn)
+         * for the year. tm_year is an offset from 1900 and we are interested
+         * in the 2000-2099 range, so any value less than 100 is invalid.
+         */
+        if (tm->tm_year < 100)
+                return -EINVAL;
+
         regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
         regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
         regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 162cd927d94b..94acbeed4e7c 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -175,8 +175,8 @@ static struct aac_driver_ident aac_drivers[] = {
         { aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */
         { aac_rx_init, "aacraid",  "ADAPTEC ", "catapult        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */
         { aac_rx_init, "aacraid",  "ADAPTEC ", "tomcat          ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */
-        { aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2120S   ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */
-        { aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */
+        { aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2120S   ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG },                     /* Adaptec 2120S (Crusader) */
+        { aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG },                     /* Adaptec 2200S (Vulcan) */
         { aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */
         { aac_rx_init, "aacraid",  "Legend  ", "Legend S220     ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */
         { aac_rx_init, "aacraid",  "Legend  ", "Legend S230     ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */
diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c
index 2a5b29d12172..e2dd6a45924a 100644
--- a/drivers/scsi/ibmvscsi/ibmvstgt.c
+++ b/drivers/scsi/ibmvscsi/ibmvstgt.c
@@ -864,21 +864,23 @@ static int ibmvstgt_probe(struct vio_dev *dev, const struct vio_device_id *id)
 
         INIT_WORK(&vport->crq_work, handle_crq);
 
-        err = crq_queue_create(&vport->crq_queue, target);
+        err = scsi_add_host(shost, target->dev);
         if (err)
                 goto free_srp_target;
 
-        err = scsi_add_host(shost, target->dev);
+        err = scsi_tgt_alloc_queue(shost);
         if (err)
-                goto destroy_queue;
+                goto remove_host;
 
-        err = scsi_tgt_alloc_queue(shost);
+        err = crq_queue_create(&vport->crq_queue, target);
         if (err)
-                goto destroy_queue;
+                goto free_queue;
 
         return 0;
-destroy_queue:
-        crq_queue_destroy(target);
+free_queue:
+        scsi_tgt_free_queue(shost);
+remove_host:
+        scsi_remove_host(shost);
 free_srp_target:
         srp_target_free(target);
 put_host:
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 801c7cf54d2e..3fdee7370ccc 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -489,12 +489,6 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
                 if (!__kfifo_get(session->cmdpool.queue,
                                  (void*)&task, sizeof(void*)))
                         return NULL;
-
-                if ((hdr->opcode == (ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE)) &&
-                     hdr->ttt == RESERVED_ITT) {
-                        conn->ping_task = task;
-                        conn->last_ping = jiffies;
-                }
         }
         /*
          * released in complete pdu for task we expect a response for, and
@@ -703,6 +697,11 @@ static void iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr)
         task = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0);
         if (!task)
                 iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n");
+        else if (!rhdr) {
+                /* only track our nops */
+                conn->ping_task = task;
+                conn->last_ping = jiffies;
+        }
 }
 
 static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index fa45a1a66867..148d3af92aef 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -648,8 +648,8 @@ static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd)
         struct request *req = cmd->request;
         unsigned long flags;
 
-        scsi_unprep_request(req);
         spin_lock_irqsave(q->queue_lock, flags);
+        scsi_unprep_request(req);
         blk_requeue_request(q, req);
         spin_unlock_irqrestore(q->queue_lock, flags);
 
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index 0d15b0eaf79a..5139c25ca962 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -356,7 +356,9 @@ int w1_reset_select_slave(struct w1_slave *sl)
                 w1_write_8(sl->master, W1_SKIP_ROM);
         else {
                 u8 match[9] = {W1_MATCH_ROM, };
-                memcpy(&match[1], (u8 *)&sl->reg_num, 8);
+                u64 rn = le64_to_cpu(*((u64*)&sl->reg_num));
+
+                memcpy(&match[1], &rn, 8);
                 w1_write_block(sl->master, match, 9);
         }
         return 0;