4 files changed, 6 insertions, 6 deletions

diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 3c85fe150cd7..4fa17c76eea2 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -393,7 +393,7 @@ void adm1026_init_client(struct i2c_client *client)
 
         value = data->config3;
         if (data->config3 & CFG3_GPIO16_ENABLE) {
-                dev_dbg(&client->dev, "GPIO16 enabled.  THERM"
+                dev_dbg(&client->dev, "GPIO16 enabled.  THERM "
                         "pin disabled.\n");
         } else {
                 dev_dbg(&client->dev, "THERM pin enabled.  "
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index bf553dcd97d6..3c159f1d49ee 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -363,7 +363,7 @@ static void __exit sensors_max1619_exit(void)
         i2c_del_driver(&max1619_driver);
 }
 
-MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and"
+MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and "
         "Jean Delvare <khali@linux-fr.org>");
 MODULE_DESCRIPTION("MAX1619 sensor driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 876c68f3af31..fa4032d53b79 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -1043,7 +1043,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
         if (init >= 2 && data->innr) {
                 reg = pc87360_read_value(data, LD_IN, NO_BANK,
                                          PC87365_REG_IN_CONVRATE);
-                dev_info(&client->dev, "VLM conversion set to"
+                dev_info(&client->dev, "VLM conversion set to "
                          "1s period, 160us delay\n");
                 pc87360_write_value(data, LD_IN, NO_BANK,
                                     PC87365_REG_IN_CONVRATE,
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 0ab7e37f5b00..1ab41313ce51 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -137,7 +137,7 @@ static int i801_setup(struct pci_dev *dev)
                 pci_read_config_word(I801_dev, SMBBA, &i801_smba);
                 i801_smba &= 0xfff0;
                 if(i801_smba == 0) {
-                        dev_err(&dev->dev, "SMB base address uninitialized"
+                        dev_err(&dev->dev, "SMB base address uninitialized "
                                 "- upgrade BIOS or use force_addr=0xaddr\n");
                         return -ENODEV;
                 }
@@ -186,7 +186,7 @@ static int i801_transaction(void)
         int result = 0;
         int timeout = 0;
 
-        dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x,"
+        dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
                 "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
                 inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
                 inb_p(SMBHSTDAT1));
@@ -240,7 +240,7 @@ static int i801_transaction(void)
                 outb_p(inb(SMBHSTSTS), SMBHSTSTS);
 
         if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
-                dev_dbg(&I801_dev->dev, "Failed reset at end of transaction"
+                dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
                         "(%02x)\n", temp);
         }
         dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "