3 files changed, 92 insertions, 14 deletions

diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c
index 1d755e20880c..3f6d51d11374 100644
--- a/drivers/pcmcia/cardbus.c
+++ b/drivers/pcmcia/cardbus.c
@@ -228,6 +228,11 @@ int cb_alloc(struct pcmcia_socket * s)
         pci_bus_size_bridges(bus);
         pci_bus_assign_resources(bus);
         cardbus_assign_irqs(bus, s->pci_irq);
+
+        /* socket specific tune function */
+        if (s->tune_bridge)
+                s->tune_bridge(s, bus);
+
         pci_enable_bridges(bus);
         pci_bus_add_devices(bus);
 
diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h
index fbe233e19ceb..d319f2e7d053 100644
--- a/drivers/pcmcia/ti113x.h
+++ b/drivers/pcmcia/ti113x.h
@@ -153,6 +153,12 @@
 /* EnE test register */
 #define ENE_TEST_C9                     0xc9    /* 8bit */
 #define ENE_TEST_C9_TLTENABLE           0x02
+#define ENE_TEST_C9_PFENABLE_F0         0x04
+#define ENE_TEST_C9_PFENABLE_F1         0x08
+#define ENE_TEST_C9_PFENABLE            (ENE_TEST_C9_PFENABLE_F0 | ENE_TEST_C9_PFENABLE_F0)
+#define ENE_TEST_C9_WPDISALBLE_F0       0x40
+#define ENE_TEST_C9_WPDISALBLE_F1       0x80
+#define ENE_TEST_C9_WPDISALBLE          (ENE_TEST_C9_WPDISALBLE_F0 | ENE_TEST_C9_WPDISALBLE_F1)
 
 /*
  * Texas Instruments CardBus controller overrides.
@@ -791,16 +797,6 @@ static int ti12xx_override(struct yenta_socket *socket)
                 config_writel(socket, TI113X_SYSTEM_CONTROL, val);
 
         /*
-         * for EnE bridges only: clear testbit TLTEnable. this makes the
-         * RME Hammerfall DSP sound card working.
-         */
-        if (socket->dev->vendor == PCI_VENDOR_ID_ENE) {
-                u8 test_c9 = config_readb(socket, ENE_TEST_C9);
-                test_c9 &= ~ENE_TEST_C9_TLTENABLE;
-                config_writeb(socket, ENE_TEST_C9, test_c9);
-        }
-
-        /*
          * Yenta expects controllers to use CSCINT to route
          * CSC interrupts to PCI rather than INTVAL.
          */
@@ -841,5 +837,75 @@ static int ti1250_override(struct yenta_socket *socket)
         return ti12xx_override(socket);
 }
 
+
+/**
+ * EnE specific part. EnE bridges are register compatible with TI bridges but
+ * have their own test registers and more important their own little problems.
+ * Some fixup code to make everybody happy (TM).
+ */
+
+/**
+ * set/clear various test bits:
+ * Defaults to clear the bit.
+ * - mask (u8) defines what bits to change
+ * - bits (u8) is the values to change them to
+ * -> it's
+ *      current = (current & ~mask) | bits
+ */
+/* pci ids of devices that wants to have the bit set */
+#define DEVID(_vend,_dev,_subvend,_subdev,mask,bits) {          \
+                .vendor         = _vend,                        \
+                .device         = _dev,                         \
+                .subvendor      = _subvend,                     \
+                .subdevice      = _subdev,                      \
+                .driver_data    = ((mask) << 8 | (bits)),       \
+        }
+static struct pci_device_id ene_tune_tbl[] = {
+        /* Echo Audio products based on motorola DSP56301 and DSP56361 */
+        DEVID(PCI_VENDOR_ID_MOTOROLA, 0x1801, 0xECC0, PCI_ANY_ID,
+                ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),
+        DEVID(PCI_VENDOR_ID_MOTOROLA, 0x3410, 0xECC0, PCI_ANY_ID,
+                ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),
+
+        {}
+};
+
+static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus)
+{
+        struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
+        struct pci_dev *dev;
+        struct pci_device_id *id = NULL;
+        u8 test_c9, old_c9, mask, bits;
+
+        list_for_each_entry(dev, &bus->devices, bus_list) {
+                id = (struct pci_device_id *) pci_match_id(ene_tune_tbl, dev);
+                if (id)
+                        break;
+        }
+
+        test_c9 = old_c9 = config_readb(socket, ENE_TEST_C9);
+        if (id) {
+                mask = (id->driver_data >> 8) & 0xFF;
+                bits = id->driver_data & 0xFF;
+
+                test_c9 = (test_c9 & ~mask) | bits;
+        }
+        else
+                /* default to clear TLTEnable bit, old behaviour */
+                test_c9 &= ~ENE_TEST_C9_TLTENABLE;
+
+        printk(KERN_INFO "yenta EnE: chaning testregister 0xC9, %02x -> %02x\n", old_c9, test_c9);
+        config_writeb(socket, ENE_TEST_C9, test_c9);
+}
+
+
+static int ene_override(struct yenta_socket *socket)
+{
+        /* install tune_bridge() function */
+        socket->socket.tune_bridge = ene_tune_bridge;
+
+        return ti1250_override(socket);
+}
+
 #endif /* _LINUX_TI113X_H */
 
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index ba4d78e5b121..fd2a6f892c41 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -819,6 +819,7 @@ enum {
         CARDBUS_TYPE_TOPIC95,
         CARDBUS_TYPE_TOPIC97,
         CARDBUS_TYPE_O2MICRO,
+        CARDBUS_TYPE_ENE,
 };
 
 /*
@@ -865,6 +866,12 @@ static struct cardbus_type cardbus_type[] = {
                 .override       = o2micro_override,
                 .restore_state  = o2micro_restore_state,
         },
+        [CARDBUS_TYPE_ENE]      = {
+                .override       = ene_override,
+                .save_state     = ti_save_state,
+                .restore_state  = ti_restore_state,
+                .sock_init      = ti_init,
+        },
 };
 
 
@@ -1265,10 +1272,10 @@ static struct pci_device_id yenta_table [] = {
         CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1250, TI1250),
         CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1410, TI1250),
 
-        CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, TI12XX),
-        CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, TI12XX),
-        CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, TI1250),
-        CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, TI12XX),
+        CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, ENE),
+        CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, ENE),
+        CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, ENE),
+        CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, ENE),
 
         CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C465, RICOH),
         CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C466, RICOH),