diff options
Diffstat (limited to 'drivers')
71 files changed, 2167 insertions, 1503 deletions
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index e7347db5b6c4..b663b7ffae4b 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c | |||
| @@ -45,8 +45,6 @@ static const struct portinfo pata_icside_portinfo_v6_2 = { | |||
| 45 | .stepping = 6, | 45 | .stepping = 6, |
| 46 | }; | 46 | }; |
| 47 | 47 | ||
| 48 | #define PATA_ICSIDE_MAX_SG 128 | ||
| 49 | |||
| 50 | struct pata_icside_state { | 48 | struct pata_icside_state { |
| 51 | void __iomem *irq_port; | 49 | void __iomem *irq_port; |
| 52 | void __iomem *ioc_base; | 50 | void __iomem *ioc_base; |
| @@ -57,7 +55,6 @@ struct pata_icside_state { | |||
| 57 | u8 disabled; | 55 | u8 disabled; |
| 58 | unsigned int speed[ATA_MAX_DEVICES]; | 56 | unsigned int speed[ATA_MAX_DEVICES]; |
| 59 | } port[2]; | 57 | } port[2]; |
| 60 | struct scatterlist sg[PATA_ICSIDE_MAX_SG]; | ||
| 61 | }; | 58 | }; |
| 62 | 59 | ||
| 63 | struct pata_icside_info { | 60 | struct pata_icside_info { |
| @@ -222,9 +219,7 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc) | |||
| 222 | { | 219 | { |
| 223 | struct ata_port *ap = qc->ap; | 220 | struct ata_port *ap = qc->ap; |
| 224 | struct pata_icside_state *state = ap->host->private_data; | 221 | struct pata_icside_state *state = ap->host->private_data; |
| 225 | struct scatterlist *sg, *rsg = state->sg; | ||
| 226 | unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE; | 222 | unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE; |
| 227 | unsigned int si; | ||
| 228 | 223 | ||
| 229 | /* | 224 | /* |
| 230 | * We are simplex; BUG if we try to fiddle with DMA | 225 | * We are simplex; BUG if we try to fiddle with DMA |
| @@ -233,20 +228,12 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc) | |||
| 233 | BUG_ON(dma_channel_active(state->dma)); | 228 | BUG_ON(dma_channel_active(state->dma)); |
| 234 | 229 | ||
| 235 | /* | 230 | /* |
| 236 | * Copy ATAs scattered sg list into a contiguous array of sg | ||
| 237 | */ | ||
| 238 | for_each_sg(qc->sg, sg, qc->n_elem, si) { | ||
| 239 | memcpy(rsg, sg, sizeof(*sg)); | ||
| 240 | rsg++; | ||
| 241 | } | ||
| 242 | |||
| 243 | /* | ||
| 244 | * Route the DMA signals to the correct interface | 231 | * Route the DMA signals to the correct interface |
| 245 | */ | 232 | */ |
| 246 | writeb(state->port[ap->port_no].port_sel, state->ioc_base); | 233 | writeb(state->port[ap->port_no].port_sel, state->ioc_base); |
| 247 | 234 | ||
| 248 | set_dma_speed(state->dma, state->port[ap->port_no].speed[qc->dev->devno]); | 235 | set_dma_speed(state->dma, state->port[ap->port_no].speed[qc->dev->devno]); |
| 249 | set_dma_sg(state->dma, state->sg, rsg - state->sg); | 236 | set_dma_sg(state->dma, qc->sg, qc->n_elem); |
| 250 | set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ); | 237 | set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ); |
| 251 | 238 | ||
| 252 | /* issue r/w command */ | 239 | /* issue r/w command */ |
| @@ -306,8 +293,8 @@ static int icside_dma_init(struct pata_icside_info *info) | |||
| 306 | 293 | ||
| 307 | static struct scsi_host_template pata_icside_sht = { | 294 | static struct scsi_host_template pata_icside_sht = { |
| 308 | ATA_BASE_SHT(DRV_NAME), | 295 | ATA_BASE_SHT(DRV_NAME), |
| 309 | .sg_tablesize = PATA_ICSIDE_MAX_SG, | 296 | .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, |
| 310 | .dma_boundary = ~0, /* no dma boundaries */ | 297 | .dma_boundary = IOMD_DMA_BOUNDARY, |
| 311 | }; | 298 | }; |
| 312 | 299 | ||
| 313 | static void pata_icside_postreset(struct ata_link *link, unsigned int *classes) | 300 | static void pata_icside_postreset(struct ata_link *link, unsigned int *classes) |
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index ba68a4671cb5..538313f9e7ac 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c | |||
| @@ -102,7 +102,7 @@ static int __init omap_rng_probe(struct platform_device *pdev) | |||
| 102 | return -EBUSY; | 102 | return -EBUSY; |
| 103 | 103 | ||
| 104 | if (cpu_is_omap24xx()) { | 104 | if (cpu_is_omap24xx()) { |
| 105 | rng_ick = clk_get(&pdev->dev, "rng_ick"); | 105 | rng_ick = clk_get(&pdev->dev, "ick"); |
| 106 | if (IS_ERR(rng_ick)) { | 106 | if (IS_ERR(rng_ick)) { |
| 107 | dev_err(&pdev->dev, "Could not get rng_ick\n"); | 107 | dev_err(&pdev->dev, "Could not get rng_ick\n"); |
| 108 | ret = PTR_ERR(rng_ick); | 108 | ret = PTR_ERR(rng_ick); |
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index ae50a9d1a4e6..da781d107895 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c | |||
| @@ -1649,7 +1649,7 @@ static int ipu_probe(struct platform_device *pdev) | |||
| 1649 | } | 1649 | } |
| 1650 | 1650 | ||
| 1651 | /* Get IPU clock */ | 1651 | /* Get IPU clock */ |
| 1652 | ipu_data.ipu_clk = clk_get(&pdev->dev, "ipu_clk"); | 1652 | ipu_data.ipu_clk = clk_get(&pdev->dev, NULL); |
| 1653 | if (IS_ERR(ipu_data.ipu_clk)) { | 1653 | if (IS_ERR(ipu_data.ipu_clk)) { |
| 1654 | ret = PTR_ERR(ipu_data.ipu_clk); | 1654 | ret = PTR_ERR(ipu_data.ipu_clk); |
| 1655 | goto err_clk_get; | 1655 | goto err_clk_get; |
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c index 9aefb5e5864d..86796488ef4f 100644 --- a/drivers/i2c/busses/i2c-acorn.c +++ b/drivers/i2c/busses/i2c-acorn.c | |||
| @@ -15,9 +15,9 @@ | |||
| 15 | #include <linux/init.h> | 15 | #include <linux/init.h> |
| 16 | #include <linux/i2c.h> | 16 | #include <linux/i2c.h> |
| 17 | #include <linux/i2c-algo-bit.h> | 17 | #include <linux/i2c-algo-bit.h> |
| 18 | #include <linux/io.h> | ||
| 18 | 19 | ||
| 19 | #include <mach/hardware.h> | 20 | #include <mach/hardware.h> |
| 20 | #include <asm/io.h> | ||
| 21 | #include <asm/hardware/ioc.h> | 21 | #include <asm/hardware/ioc.h> |
| 22 | #include <asm/system.h> | 22 | #include <asm/system.h> |
| 23 | 23 | ||
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index be8ee2cac8bb..ece0125a1ee5 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c | |||
| @@ -193,22 +193,24 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) | |||
| 193 | 193 | ||
| 194 | static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev) | 194 | static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev) |
| 195 | { | 195 | { |
| 196 | if (cpu_is_omap16xx() || cpu_class_is_omap2()) { | 196 | int ret; |
| 197 | dev->iclk = clk_get(dev->dev, "i2c_ick"); | 197 | |
| 198 | if (IS_ERR(dev->iclk)) { | 198 | dev->iclk = clk_get(dev->dev, "ick"); |
| 199 | dev->iclk = NULL; | 199 | if (IS_ERR(dev->iclk)) { |
| 200 | return -ENODEV; | 200 | ret = PTR_ERR(dev->iclk); |
| 201 | } | 201 | dev->iclk = NULL; |
| 202 | return ret; | ||
| 202 | } | 203 | } |
| 203 | 204 | ||
| 204 | dev->fclk = clk_get(dev->dev, "i2c_fck"); | 205 | dev->fclk = clk_get(dev->dev, "fck"); |
| 205 | if (IS_ERR(dev->fclk)) { | 206 | if (IS_ERR(dev->fclk)) { |
| 207 | ret = PTR_ERR(dev->fclk); | ||
| 206 | if (dev->iclk != NULL) { | 208 | if (dev->iclk != NULL) { |
| 207 | clk_put(dev->iclk); | 209 | clk_put(dev->iclk); |
| 208 | dev->iclk = NULL; | 210 | dev->iclk = NULL; |
| 209 | } | 211 | } |
| 210 | dev->fclk = NULL; | 212 | dev->fclk = NULL; |
| 211 | return -ENODEV; | 213 | return ret; |
| 212 | } | 214 | } |
| 213 | 215 | ||
| 214 | return 0; | 216 | return 0; |
| @@ -218,18 +220,15 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev) | |||
| 218 | { | 220 | { |
| 219 | clk_put(dev->fclk); | 221 | clk_put(dev->fclk); |
| 220 | dev->fclk = NULL; | 222 | dev->fclk = NULL; |
| 221 | if (dev->iclk != NULL) { | 223 | clk_put(dev->iclk); |
| 222 | clk_put(dev->iclk); | 224 | dev->iclk = NULL; |
| 223 | dev->iclk = NULL; | ||
| 224 | } | ||
| 225 | } | 225 | } |
| 226 | 226 | ||
| 227 | static void omap_i2c_unidle(struct omap_i2c_dev *dev) | 227 | static void omap_i2c_unidle(struct omap_i2c_dev *dev) |
| 228 | { | 228 | { |
| 229 | WARN_ON(!dev->idle); | 229 | WARN_ON(!dev->idle); |
| 230 | 230 | ||
| 231 | if (dev->iclk != NULL) | 231 | clk_enable(dev->iclk); |
| 232 | clk_enable(dev->iclk); | ||
| 233 | clk_enable(dev->fclk); | 232 | clk_enable(dev->fclk); |
| 234 | dev->idle = 0; | 233 | dev->idle = 0; |
| 235 | if (dev->iestate) | 234 | if (dev->iestate) |
| @@ -254,8 +253,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev) | |||
| 254 | } | 253 | } |
| 255 | dev->idle = 1; | 254 | dev->idle = 1; |
| 256 | clk_disable(dev->fclk); | 255 | clk_disable(dev->fclk); |
| 257 | if (dev->iclk != NULL) | 256 | clk_disable(dev->iclk); |
| 258 | clk_disable(dev->iclk); | ||
| 259 | } | 257 | } |
| 260 | 258 | ||
| 261 | static int omap_i2c_init(struct omap_i2c_dev *dev) | 259 | static int omap_i2c_init(struct omap_i2c_dev *dev) |
| @@ -312,15 +310,14 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) | |||
| 312 | omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); | 310 | omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); |
| 313 | 311 | ||
| 314 | if (cpu_class_is_omap1()) { | 312 | if (cpu_class_is_omap1()) { |
| 315 | struct clk *armxor_ck; | 313 | /* |
| 316 | 314 | * The I2C functional clock is the armxor_ck, so there's | |
| 317 | armxor_ck = clk_get(NULL, "armxor_ck"); | 315 | * no need to get "armxor_ck" separately. Now, if OMAP2420 |
| 318 | if (IS_ERR(armxor_ck)) | 316 | * always returns 12MHz for the functional clock, we can |
| 319 | dev_warn(dev->dev, "Could not get armxor_ck\n"); | 317 | * do this bit unconditionally. |
| 320 | else { | 318 | */ |
| 321 | fclk_rate = clk_get_rate(armxor_ck); | 319 | fclk_rate = clk_get_rate(dev->fclk); |
| 322 | clk_put(armxor_ck); | 320 | |
| 323 | } | ||
| 324 | /* TRM for 5912 says the I2C clock must be prescaled to be | 321 | /* TRM for 5912 says the I2C clock must be prescaled to be |
| 325 | * between 7 - 12 MHz. The XOR input clock is typically | 322 | * between 7 - 12 MHz. The XOR input clock is typically |
| 326 | * 12, 13 or 19.2 MHz. So we should have code that produces: | 323 | * 12, 13 or 19.2 MHz. So we should have code that produces: |
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c index 4678babd3ce6..fede619ba227 100644 --- a/drivers/i2c/busses/i2c-versatile.c +++ b/drivers/i2c/busses/i2c-versatile.c | |||
| @@ -102,7 +102,13 @@ static int i2c_versatile_probe(struct platform_device *dev) | |||
| 102 | i2c->algo = i2c_versatile_algo; | 102 | i2c->algo = i2c_versatile_algo; |
| 103 | i2c->algo.data = i2c; | 103 | i2c->algo.data = i2c; |
| 104 | 104 | ||
| 105 | ret = i2c_bit_add_bus(&i2c->adap); | 105 | if (dev->id >= 0) { |
| 106 | /* static bus numbering */ | ||
| 107 | i2c->adap.nr = dev->id; | ||
| 108 | ret = i2c_bit_add_numbered_bus(&i2c->adap); | ||
| 109 | } else | ||
| 110 | /* dynamic bus numbering */ | ||
| 111 | ret = i2c_bit_add_bus(&i2c->adap); | ||
| 106 | if (ret >= 0) { | 112 | if (ret >= 0) { |
| 107 | platform_set_drvdata(dev, i2c); | 113 | platform_set_drvdata(dev, i2c); |
| 108 | return 0; | 114 | return 0; |
| @@ -146,7 +152,7 @@ static void __exit i2c_versatile_exit(void) | |||
| 146 | platform_driver_unregister(&i2c_versatile_driver); | 152 | platform_driver_unregister(&i2c_versatile_driver); |
| 147 | } | 153 | } |
| 148 | 154 | ||
| 149 | module_init(i2c_versatile_init); | 155 | subsys_initcall(i2c_versatile_init); |
| 150 | module_exit(i2c_versatile_exit); | 156 | module_exit(i2c_versatile_exit); |
| 151 | 157 | ||
| 152 | MODULE_DESCRIPTION("ARM Versatile I2C bus driver"); | 158 | MODULE_DESCRIPTION("ARM Versatile I2C bus driver"); |
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c index abb04c82c622..634af6a8e6b3 100644 --- a/drivers/input/keyboard/corgikbd.c +++ b/drivers/input/keyboard/corgikbd.c | |||
| @@ -21,8 +21,6 @@ | |||
| 21 | #include <linux/slab.h> | 21 | #include <linux/slab.h> |
| 22 | 22 | ||
| 23 | #include <mach/corgi.h> | 23 | #include <mach/corgi.h> |
| 24 | #include <mach/hardware.h> | ||
| 25 | #include <mach/pxa-regs.h> | ||
| 26 | #include <mach/pxa2xx-gpio.h> | 24 | #include <mach/pxa2xx-gpio.h> |
| 27 | #include <asm/hardware/scoop.h> | 25 | #include <asm/hardware/scoop.h> |
| 28 | 26 | ||
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c index 9d1781a618e9..13967422658c 100644 --- a/drivers/input/keyboard/spitzkbd.c +++ b/drivers/input/keyboard/spitzkbd.c | |||
| @@ -21,8 +21,6 @@ | |||
| 21 | #include <linux/slab.h> | 21 | #include <linux/slab.h> |
| 22 | 22 | ||
| 23 | #include <mach/spitz.h> | 23 | #include <mach/spitz.h> |
| 24 | #include <mach/hardware.h> | ||
| 25 | #include <mach/pxa-regs.h> | ||
| 26 | #include <mach/pxa2xx-gpio.h> | 24 | #include <mach/pxa2xx-gpio.h> |
| 27 | 25 | ||
| 28 | #define KB_ROWS 7 | 26 | #define KB_ROWS 7 |
diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c index 56c079ef5018..272deddc8db6 100644 --- a/drivers/input/mouse/rpcmouse.c +++ b/drivers/input/mouse/rpcmouse.c | |||
| @@ -22,10 +22,10 @@ | |||
| 22 | #include <linux/interrupt.h> | 22 | #include <linux/interrupt.h> |
| 23 | #include <linux/init.h> | 23 | #include <linux/init.h> |
| 24 | #include <linux/input.h> | 24 | #include <linux/input.h> |
| 25 | #include <linux/io.h> | ||
| 25 | 26 | ||
| 26 | #include <mach/hardware.h> | 27 | #include <mach/hardware.h> |
| 27 | #include <asm/irq.h> | 28 | #include <asm/irq.h> |
| 28 | #include <asm/io.h> | ||
| 29 | #include <asm/hardware/iomd.h> | 29 | #include <asm/hardware/iomd.h> |
| 30 | 30 | ||
| 31 | MODULE_AUTHOR("Vojtech Pavlik, Russell King"); | 31 | MODULE_AUTHOR("Vojtech Pavlik, Russell King"); |
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c index 7f36edd34f8b..ed045c99f84b 100644 --- a/drivers/input/serio/rpckbd.c +++ b/drivers/input/serio/rpckbd.c | |||
| @@ -33,10 +33,10 @@ | |||
| 33 | #include <linux/serio.h> | 33 | #include <linux/serio.h> |
| 34 | #include <linux/err.h> | 34 | #include <linux/err.h> |
| 35 | #include <linux/platform_device.h> | 35 | #include <linux/platform_device.h> |
| 36 | #include <linux/io.h> | ||
| 36 | 37 | ||
| 37 | #include <asm/irq.h> | 38 | #include <asm/irq.h> |
| 38 | #include <mach/hardware.h> | 39 | #include <mach/hardware.h> |
| 39 | #include <asm/io.h> | ||
| 40 | #include <asm/hardware/iomd.h> | 40 | #include <asm/hardware/iomd.h> |
| 41 | #include <asm/system.h> | 41 | #include <asm/system.h> |
| 42 | 42 | ||
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c index 3fb51b54fe61..94a1919d439d 100644 --- a/drivers/input/touchscreen/corgi_ts.c +++ b/drivers/input/touchscreen/corgi_ts.c | |||
| @@ -21,7 +21,6 @@ | |||
| 21 | 21 | ||
| 22 | #include <mach/sharpsl.h> | 22 | #include <mach/sharpsl.h> |
| 23 | #include <mach/hardware.h> | 23 | #include <mach/hardware.h> |
| 24 | #include <mach/pxa-regs.h> | ||
| 25 | #include <mach/pxa2xx-gpio.h> | 24 | #include <mach/pxa2xx-gpio.h> |
| 26 | 25 | ||
| 27 | 26 | ||
diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c index 73eb656acfe3..805faaea6449 100644 --- a/drivers/media/video/omap24xxcam.c +++ b/drivers/media/video/omap24xxcam.c | |||
| @@ -80,17 +80,17 @@ static int omap24xxcam_clock_get(struct omap24xxcam_device *cam) | |||
| 80 | { | 80 | { |
| 81 | int rval = 0; | 81 | int rval = 0; |
| 82 | 82 | ||
| 83 | cam->fck = clk_get(cam->dev, "cam_fck"); | 83 | cam->fck = clk_get(cam->dev, "fck"); |
| 84 | if (IS_ERR(cam->fck)) { | 84 | if (IS_ERR(cam->fck)) { |
| 85 | dev_err(cam->dev, "can't get cam_fck"); | 85 | dev_err(cam->dev, "can't get camera fck"); |
| 86 | rval = PTR_ERR(cam->fck); | 86 | rval = PTR_ERR(cam->fck); |
| 87 | omap24xxcam_clock_put(cam); | 87 | omap24xxcam_clock_put(cam); |
| 88 | return rval; | 88 | return rval; |
| 89 | } | 89 | } |
| 90 | 90 | ||
| 91 | cam->ick = clk_get(cam->dev, "cam_ick"); | 91 | cam->ick = clk_get(cam->dev, "ick"); |
| 92 | if (IS_ERR(cam->ick)) { | 92 | if (IS_ERR(cam->ick)) { |
| 93 | dev_err(cam->dev, "can't get cam_ick"); | 93 | dev_err(cam->dev, "can't get camera ick"); |
| 94 | rval = PTR_ERR(cam->ick); | 94 | rval = PTR_ERR(cam->ick); |
| 95 | omap24xxcam_clock_put(cam); | 95 | omap24xxcam_clock_put(cam); |
| 96 | } | 96 | } |
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 07c334f25aae..0c4ce58c53d5 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c | |||
| @@ -35,7 +35,6 @@ | |||
| 35 | #include <linux/videodev2.h> | 35 | #include <linux/videodev2.h> |
| 36 | 36 | ||
| 37 | #include <mach/dma.h> | 37 | #include <mach/dma.h> |
| 38 | #include <mach/pxa-regs.h> | ||
| 39 | #include <mach/camera.h> | 38 | #include <mach/camera.h> |
| 40 | 39 | ||
| 41 | #define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5) | 40 | #define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5) |
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 2909bbc8ad00..a663429b3d55 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c | |||
| @@ -490,7 +490,7 @@ static void mmci_check_status(unsigned long data) | |||
| 490 | mod_timer(&host->timer, jiffies + HZ); | 490 | mod_timer(&host->timer, jiffies + HZ); |
| 491 | } | 491 | } |
| 492 | 492 | ||
| 493 | static int mmci_probe(struct amba_device *dev, void *id) | 493 | static int __devinit mmci_probe(struct amba_device *dev, void *id) |
| 494 | { | 494 | { |
| 495 | struct mmc_platform_data *plat = dev->dev.platform_data; | 495 | struct mmc_platform_data *plat = dev->dev.platform_data; |
| 496 | struct mmci_host *host; | 496 | struct mmci_host *host; |
| @@ -633,7 +633,7 @@ static int mmci_probe(struct amba_device *dev, void *id) | |||
| 633 | return ret; | 633 | return ret; |
| 634 | } | 634 | } |
| 635 | 635 | ||
| 636 | static int mmci_remove(struct amba_device *dev) | 636 | static int __devexit mmci_remove(struct amba_device *dev) |
| 637 | { | 637 | { |
| 638 | struct mmc_host *mmc = amba_get_drvdata(dev); | 638 | struct mmc_host *mmc = amba_get_drvdata(dev); |
| 639 | 639 | ||
| @@ -730,7 +730,7 @@ static struct amba_driver mmci_driver = { | |||
| 730 | .name = DRIVER_NAME, | 730 | .name = DRIVER_NAME, |
| 731 | }, | 731 | }, |
| 732 | .probe = mmci_probe, | 732 | .probe = mmci_probe, |
| 733 | .remove = mmci_remove, | 733 | .remove = __devexit_p(mmci_remove), |
| 734 | .suspend = mmci_suspend, | 734 | .suspend = mmci_suspend, |
| 735 | .resume = mmci_resume, | 735 | .resume = mmci_resume, |
| 736 | .id_table = mmci_ids, | 736 | .id_table = mmci_ids, |
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index dda0be4e25dc..b4a615c55f28 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c | |||
| @@ -42,7 +42,7 @@ | |||
| 42 | #define HAS_DMA | 42 | #define HAS_DMA |
| 43 | #endif | 43 | #endif |
| 44 | 44 | ||
| 45 | #define DRIVER_NAME "imx-mmc" | 45 | #define DRIVER_NAME "mxc-mmc" |
| 46 | 46 | ||
| 47 | #define MMC_REG_STR_STP_CLK 0x00 | 47 | #define MMC_REG_STR_STP_CLK 0x00 |
| 48 | #define MMC_REG_STATUS 0x04 | 48 | #define MMC_REG_STATUS 0x04 |
| @@ -707,7 +707,7 @@ static int mxcmci_probe(struct platform_device *pdev) | |||
| 707 | host->res = r; | 707 | host->res = r; |
| 708 | host->irq = irq; | 708 | host->irq = irq; |
| 709 | 709 | ||
| 710 | host->clk = clk_get(&pdev->dev, "sdhc_clk"); | 710 | host->clk = clk_get(&pdev->dev, NULL); |
| 711 | if (IS_ERR(host->clk)) { | 711 | if (IS_ERR(host->clk)) { |
| 712 | ret = PTR_ERR(host->clk); | 712 | ret = PTR_ERR(host->clk); |
| 713 | goto out_iounmap; | 713 | goto out_iounmap; |
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 67d7b7fef084..5570849188cc 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c | |||
| @@ -1460,18 +1460,12 @@ static int __init mmc_omap_probe(struct platform_device *pdev) | |||
| 1460 | if (!host->virt_base) | 1460 | if (!host->virt_base) |
| 1461 | goto err_ioremap; | 1461 | goto err_ioremap; |
| 1462 | 1462 | ||
| 1463 | if (cpu_is_omap24xx()) { | 1463 | host->iclk = clk_get(&pdev->dev, "ick"); |
| 1464 | host->iclk = clk_get(&pdev->dev, "mmc_ick"); | 1464 | if (IS_ERR(host->iclk)) |
| 1465 | if (IS_ERR(host->iclk)) | 1465 | goto err_free_mmc_host; |
| 1466 | goto err_free_mmc_host; | 1466 | clk_enable(host->iclk); |
| 1467 | clk_enable(host->iclk); | ||
| 1468 | } | ||
| 1469 | |||
| 1470 | if (!cpu_is_omap24xx()) | ||
| 1471 | host->fclk = clk_get(&pdev->dev, "mmc_ck"); | ||
| 1472 | else | ||
| 1473 | host->fclk = clk_get(&pdev->dev, "mmc_fck"); | ||
| 1474 | 1467 | ||
| 1468 | host->fclk = clk_get(&pdev->dev, "fck"); | ||
| 1475 | if (IS_ERR(host->fclk)) { | 1469 | if (IS_ERR(host->fclk)) { |
| 1476 | ret = PTR_ERR(host->fclk); | 1470 | ret = PTR_ERR(host->fclk); |
| 1477 | goto err_free_iclk; | 1471 | goto err_free_iclk; |
| @@ -1536,10 +1530,10 @@ static int mmc_omap_remove(struct platform_device *pdev) | |||
| 1536 | if (host->pdata->cleanup) | 1530 | if (host->pdata->cleanup) |
| 1537 | host->pdata->cleanup(&pdev->dev); | 1531 | host->pdata->cleanup(&pdev->dev); |
| 1538 | 1532 | ||
| 1539 | if (host->iclk && !IS_ERR(host->iclk)) | 1533 | mmc_omap_fclk_enable(host, 0); |
| 1540 | clk_put(host->iclk); | 1534 | clk_put(host->fclk); |
| 1541 | if (host->fclk && !IS_ERR(host->fclk)) | 1535 | clk_disable(host->iclk); |
| 1542 | clk_put(host->fclk); | 1536 | clk_put(host->iclk); |
| 1543 | 1537 | ||
| 1544 | iounmap(host->virt_base); | 1538 | iounmap(host->virt_base); |
| 1545 | release_mem_region(pdev->resource[0].start, | 1539 | release_mem_region(pdev->resource[0].start, |
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index a631c81dce12..3916a5618e28 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c | |||
| @@ -956,13 +956,13 @@ static int __init omap_mmc_probe(struct platform_device *pdev) | |||
| 956 | 956 | ||
| 957 | sema_init(&host->sem, 1); | 957 | sema_init(&host->sem, 1); |
| 958 | 958 | ||
| 959 | host->iclk = clk_get(&pdev->dev, "mmchs_ick"); | 959 | host->iclk = clk_get(&pdev->dev, "ick"); |
| 960 | if (IS_ERR(host->iclk)) { | 960 | if (IS_ERR(host->iclk)) { |
| 961 | ret = PTR_ERR(host->iclk); | 961 | ret = PTR_ERR(host->iclk); |
| 962 | host->iclk = NULL; | 962 | host->iclk = NULL; |
| 963 | goto err1; | 963 | goto err1; |
| 964 | } | 964 | } |
| 965 | host->fclk = clk_get(&pdev->dev, "mmchs_fck"); | 965 | host->fclk = clk_get(&pdev->dev, "fck"); |
| 966 | if (IS_ERR(host->fclk)) { | 966 | if (IS_ERR(host->fclk)) { |
| 967 | ret = PTR_ERR(host->fclk); | 967 | ret = PTR_ERR(host->fclk); |
| 968 | host->fclk = NULL; | 968 | host->fclk = NULL; |
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 9702ad3774cf..430095725f9f 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c | |||
| @@ -30,9 +30,8 @@ | |||
| 30 | 30 | ||
| 31 | #include <asm/sizes.h> | 31 | #include <asm/sizes.h> |
| 32 | 32 | ||
| 33 | #include <mach/dma.h> | ||
| 34 | #include <mach/hardware.h> | 33 | #include <mach/hardware.h> |
| 35 | #include <mach/pxa-regs.h> | 34 | #include <mach/dma.h> |
| 36 | #include <mach/mmc.h> | 35 | #include <mach/mmc.h> |
| 37 | 36 | ||
| 38 | #include "pxamci.h" | 37 | #include "pxamci.h" |
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c index d2ec262666c7..c9681a339a59 100644 --- a/drivers/mtd/maps/integrator-flash.c +++ b/drivers/mtd/maps/integrator-flash.c | |||
| @@ -31,6 +31,7 @@ | |||
| 31 | #include <linux/ioport.h> | 31 | #include <linux/ioport.h> |
| 32 | #include <linux/platform_device.h> | 32 | #include <linux/platform_device.h> |
| 33 | #include <linux/init.h> | 33 | #include <linux/init.h> |
| 34 | #include <linux/io.h> | ||
| 34 | 35 | ||
| 35 | #include <linux/mtd/mtd.h> | 36 | #include <linux/mtd/mtd.h> |
| 36 | #include <linux/mtd/map.h> | 37 | #include <linux/mtd/map.h> |
| @@ -38,7 +39,6 @@ | |||
| 38 | 39 | ||
| 39 | #include <asm/mach/flash.h> | 40 | #include <asm/mach/flash.h> |
| 40 | #include <mach/hardware.h> | 41 | #include <mach/hardware.h> |
| 41 | #include <asm/io.h> | ||
| 42 | #include <asm/system.h> | 42 | #include <asm/system.h> |
| 43 | 43 | ||
| 44 | #ifdef CONFIG_ARCH_P720T | 44 | #ifdef CONFIG_ARCH_P720T |
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 6f6a0f6dafd6..8f57b6f40aa2 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c | |||
| @@ -12,6 +12,7 @@ | |||
| 12 | #include <linux/slab.h> | 12 | #include <linux/slab.h> |
| 13 | #include <linux/platform_device.h> | 13 | #include <linux/platform_device.h> |
| 14 | #include <linux/err.h> | 14 | #include <linux/err.h> |
| 15 | #include <linux/io.h> | ||
| 15 | 16 | ||
| 16 | #include <linux/mtd/mtd.h> | 17 | #include <linux/mtd/mtd.h> |
| 17 | #include <linux/mtd/map.h> | 18 | #include <linux/mtd/map.h> |
| @@ -19,7 +20,6 @@ | |||
| 19 | #include <linux/mtd/concat.h> | 20 | #include <linux/mtd/concat.h> |
| 20 | 21 | ||
| 21 | #include <mach/hardware.h> | 22 | #include <mach/hardware.h> |
| 22 | #include <asm/io.h> | ||
| 23 | #include <asm/sizes.h> | 23 | #include <asm/sizes.h> |
| 24 | #include <asm/mach/flash.h> | 24 | #include <asm/mach/flash.h> |
| 25 | 25 | ||
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c index fa129c09bca8..10081e656a6f 100644 --- a/drivers/mtd/nand/cmx270_nand.c +++ b/drivers/mtd/nand/cmx270_nand.c | |||
| @@ -26,8 +26,7 @@ | |||
| 26 | #include <asm/irq.h> | 26 | #include <asm/irq.h> |
| 27 | #include <asm/mach-types.h> | 27 | #include <asm/mach-types.h> |
| 28 | 28 | ||
| 29 | #include <mach/hardware.h> | 29 | #include <mach/pxa2xx-regs.h> |
| 30 | #include <mach/pxa-regs.h> | ||
| 31 | 30 | ||
| 32 | #define GPIO_NAND_CS (11) | 31 | #define GPIO_NAND_CS (11) |
| 33 | #define GPIO_NAND_RB (89) | 32 | #define GPIO_NAND_RB (89) |
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 21fd4f1c4806..bad048aca89a 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c | |||
| @@ -880,7 +880,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) | |||
| 880 | this->read_buf = mxc_nand_read_buf; | 880 | this->read_buf = mxc_nand_read_buf; |
| 881 | this->verify_buf = mxc_nand_verify_buf; | 881 | this->verify_buf = mxc_nand_verify_buf; |
| 882 | 882 | ||
| 883 | host->clk = clk_get(&pdev->dev, "nfc_clk"); | 883 | host->clk = clk_get(&pdev->dev, "nfc"); |
| 884 | if (IS_ERR(host->clk)) | 884 | if (IS_ERR(host->clk)) |
| 885 | goto eclk; | 885 | goto eclk; |
| 886 | 886 | ||
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index cc55cbc2b308..61b69cc40009 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c | |||
| @@ -22,7 +22,6 @@ | |||
| 22 | #include <linux/irq.h> | 22 | #include <linux/irq.h> |
| 23 | 23 | ||
| 24 | #include <mach/dma.h> | 24 | #include <mach/dma.h> |
| 25 | #include <mach/pxa-regs.h> | ||
| 26 | #include <mach/pxa3xx_nand.h> | 25 | #include <mach/pxa3xx_nand.h> |
| 27 | 26 | ||
| 28 | #define CHIP_DELAY_TIMEOUT (2 * HZ/10) | 27 | #define CHIP_DELAY_TIMEOUT (2 * HZ/10) |
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index c2d012fcc29b..4bc6901b3819 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c | |||
| @@ -27,9 +27,9 @@ | |||
| 27 | #include <linux/crc32.h> | 27 | #include <linux/crc32.h> |
| 28 | #include <linux/bitops.h> | 28 | #include <linux/bitops.h> |
| 29 | #include <linux/platform_device.h> | 29 | #include <linux/platform_device.h> |
| 30 | #include <linux/io.h> | ||
| 30 | 31 | ||
| 31 | #include <mach/hardware.h> | 32 | #include <mach/hardware.h> |
| 32 | #include <asm/io.h> | ||
| 33 | #include <asm/system.h> | 33 | #include <asm/system.h> |
| 34 | 34 | ||
| 35 | #define TX_BUFFERS 15 | 35 | #define TX_BUFFERS 15 |
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c index 5fe17d5eaa54..448487e22fa3 100644 --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c | |||
| @@ -335,11 +335,20 @@ static int ixp4xx_mdio_register(void) | |||
| 335 | if (!(mdio_bus = mdiobus_alloc())) | 335 | if (!(mdio_bus = mdiobus_alloc())) |
| 336 | return -ENOMEM; | 336 | return -ENOMEM; |
| 337 | 337 | ||
| 338 | /* All MII PHY accesses use NPE-B Ethernet registers */ | 338 | if (cpu_is_ixp43x()) { |
| 339 | spin_lock_init(&mdio_lock); | 339 | /* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */ |
| 340 | mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT; | 340 | if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH)) |
| 341 | __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control); | 341 | return -ENOSYS; |
| 342 | mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT; | ||
| 343 | } else { | ||
| 344 | /* All MII PHY accesses use NPE-B Ethernet registers */ | ||
| 345 | if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0)) | ||
| 346 | return -ENOSYS; | ||
| 347 | mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT; | ||
| 348 | } | ||
| 342 | 349 | ||
| 350 | __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control); | ||
| 351 | spin_lock_init(&mdio_lock); | ||
| 343 | mdio_bus->name = "IXP4xx MII Bus"; | 352 | mdio_bus->name = "IXP4xx MII Bus"; |
| 344 | mdio_bus->read = &ixp4xx_mdio_read; | 353 | mdio_bus->read = &ixp4xx_mdio_read; |
| 345 | mdio_bus->write = &ixp4xx_mdio_write; | 354 | mdio_bus->write = &ixp4xx_mdio_write; |
| @@ -1250,9 +1259,6 @@ static struct platform_driver ixp4xx_eth_driver = { | |||
| 1250 | static int __init eth_init_module(void) | 1259 | static int __init eth_init_module(void) |
| 1251 | { | 1260 | { |
| 1252 | int err; | 1261 | int err; |
| 1253 | if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0)) | ||
| 1254 | return -ENOSYS; | ||
| 1255 | |||
| 1256 | if ((err = ixp4xx_mdio_register())) | 1262 | if ((err = ixp4xx_mdio_register())) |
| 1257 | return err; | 1263 | return err; |
| 1258 | return platform_driver_register(&ixp4xx_eth_driver); | 1264 | return platform_driver_register(&ixp4xx_eth_driver); |
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c index 31794c2363ec..e775338b525f 100644 --- a/drivers/net/irda/pxaficp_ir.c +++ b/drivers/net/irda/pxaficp_ir.c | |||
| @@ -24,9 +24,8 @@ | |||
| 24 | 24 | ||
| 25 | #include <mach/dma.h> | 25 | #include <mach/dma.h> |
| 26 | #include <mach/irda.h> | 26 | #include <mach/irda.h> |
| 27 | #include <mach/hardware.h> | ||
| 28 | #include <mach/pxa-regs.h> | ||
| 29 | #include <mach/regs-uart.h> | 27 | #include <mach/regs-uart.h> |
| 28 | #include <mach/regs-ost.h> | ||
| 30 | 29 | ||
| 31 | #define FICP __REG(0x40800000) /* Start of FICP area */ | 30 | #define FICP __REG(0x40800000) /* Start of FICP area */ |
| 32 | #define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ | 31 | #define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ |
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h index a45952e72018..8140f7cb4d85 100644 --- a/drivers/net/smc911x.h +++ b/drivers/net/smc911x.h | |||
| @@ -236,8 +236,7 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg, | |||
| 236 | * Use a DMA for RX and TX packets. | 236 | * Use a DMA for RX and TX packets. |
| 237 | */ | 237 | */ |
| 238 | #include <linux/dma-mapping.h> | 238 | #include <linux/dma-mapping.h> |
| 239 | #include <asm/dma.h> | 239 | #include <mach/dma.h> |
| 240 | #include <mach/pxa-regs.h> | ||
| 241 | 240 | ||
| 242 | static dma_addr_t rx_dmabuf, tx_dmabuf; | 241 | static dma_addr_t rx_dmabuf, tx_dmabuf; |
| 243 | static int rx_dmalen, tx_dmalen; | 242 | static int rx_dmalen, tx_dmalen; |
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index ed9ae43523a1..6c44f86ae3fd 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h | |||
| @@ -44,6 +44,7 @@ | |||
| 44 | defined(CONFIG_MACH_MAINSTONE) ||\ | 44 | defined(CONFIG_MACH_MAINSTONE) ||\ |
| 45 | defined(CONFIG_MACH_ZYLONITE) ||\ | 45 | defined(CONFIG_MACH_ZYLONITE) ||\ |
| 46 | defined(CONFIG_MACH_LITTLETON) ||\ | 46 | defined(CONFIG_MACH_LITTLETON) ||\ |
| 47 | defined(CONFIG_MACH_ZYLONITE2) ||\ | ||
| 47 | defined(CONFIG_ARCH_VIPER) | 48 | defined(CONFIG_ARCH_VIPER) |
| 48 | 49 | ||
| 49 | #include <asm/mach-types.h> | 50 | #include <asm/mach-types.h> |
| @@ -494,8 +495,6 @@ struct smc_local { | |||
| 494 | */ | 495 | */ |
| 495 | #include <linux/dma-mapping.h> | 496 | #include <linux/dma-mapping.h> |
| 496 | #include <mach/dma.h> | 497 | #include <mach/dma.h> |
| 497 | #include <mach/hardware.h> | ||
| 498 | #include <mach/pxa-regs.h> | ||
| 499 | 498 | ||
| 500 | #ifdef SMC_insl | 499 | #ifdef SMC_insl |
| 501 | #undef SMC_insl | 500 | #undef SMC_insl |
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index bb9ddb9532e3..c49a7269f6d1 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c | |||
| @@ -28,7 +28,6 @@ | |||
| 28 | #include <asm/io.h> | 28 | #include <asm/io.h> |
| 29 | #include <asm/irq.h> | 29 | #include <asm/irq.h> |
| 30 | #include <asm/system.h> | 30 | #include <asm/system.h> |
| 31 | #include <mach/pxa-regs.h> | ||
| 32 | #include <mach/pxa2xx-regs.h> | 31 | #include <mach/pxa2xx-regs.h> |
| 33 | #include <asm/mach-types.h> | 32 | #include <asm/mach-types.h> |
| 34 | 33 | ||
| @@ -39,6 +38,44 @@ | |||
| 39 | #include "soc_common.h" | 38 | #include "soc_common.h" |
| 40 | #include "pxa2xx_base.h" | 39 | #include "pxa2xx_base.h" |
| 41 | 40 | ||
| 41 | /* | ||
| 42 | * Personal Computer Memory Card International Association (PCMCIA) sockets | ||
| 43 | */ | ||
| 44 | |||
| 45 | #define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ | ||
| 46 | #define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ | ||
| 47 | #define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ | ||
| 48 | #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ | ||
| 49 | #define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ | ||
| 50 | |||
| 51 | #define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ | ||
| 52 | #define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ | ||
| 53 | #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ | ||
| 54 | #define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ | ||
| 55 | |||
| 56 | #define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ | ||
| 57 | #define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ | ||
| 58 | #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ | ||
| 59 | #define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ | ||
| 60 | |||
| 61 | #define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ | ||
| 62 | (0x20000000 + (Nb) * PCMCIASp) | ||
| 63 | #define _PCMCIAIO(Nb) _PCMCIA(Nb) /* PCMCIA I/O [0..1] */ | ||
| 64 | #define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ | ||
| 65 | (_PCMCIA(Nb) + 2 * PCMCIAPrtSp) | ||
| 66 | #define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ | ||
| 67 | (_PCMCIA(Nb) + 3 * PCMCIAPrtSp) | ||
| 68 | |||
| 69 | #define _PCMCIA0 _PCMCIA(0) /* PCMCIA 0 */ | ||
| 70 | #define _PCMCIA0IO _PCMCIAIO(0) /* PCMCIA 0 I/O */ | ||
| 71 | #define _PCMCIA0Attr _PCMCIAAttr(0) /* PCMCIA 0 Attribute */ | ||
| 72 | #define _PCMCIA0Mem _PCMCIAMem(0) /* PCMCIA 0 Memory */ | ||
| 73 | |||
| 74 | #define _PCMCIA1 _PCMCIA(1) /* PCMCIA 1 */ | ||
| 75 | #define _PCMCIA1IO _PCMCIAIO(1) /* PCMCIA 1 I/O */ | ||
| 76 | #define _PCMCIA1Attr _PCMCIAAttr(1) /* PCMCIA 1 Attribute */ | ||
| 77 | #define _PCMCIA1Mem _PCMCIAMem(1) /* PCMCIA 1 Memory */ | ||
| 78 | |||
| 42 | 79 | ||
| 43 | #define MCXX_SETUP_MASK (0x7f) | 80 | #define MCXX_SETUP_MASK (0x7f) |
| 44 | #define MCXX_ASST_MASK (0x1f) | 81 | #define MCXX_ASST_MASK (0x1f) |
| @@ -177,29 +214,73 @@ static void pxa2xx_configure_sockets(struct device *dev) | |||
| 177 | MECR |= MECR_CIT; | 214 | MECR |= MECR_CIT; |
| 178 | 215 | ||
| 179 | /* Set MECR:NOS (Number Of Sockets) */ | 216 | /* Set MECR:NOS (Number Of Sockets) */ |
| 180 | if (ops->nr > 1 || machine_is_viper()) | 217 | if ((ops->first + ops->nr) > 1 || machine_is_viper()) |
| 181 | MECR |= MECR_NOS; | 218 | MECR |= MECR_NOS; |
| 182 | else | 219 | else |
| 183 | MECR &= ~MECR_NOS; | 220 | MECR &= ~MECR_NOS; |
| 184 | } | 221 | } |
| 185 | 222 | ||
| 223 | static const char *skt_names[] = { | ||
| 224 | "PCMCIA socket 0", | ||
| 225 | "PCMCIA socket 1", | ||
| 226 | }; | ||
| 227 | |||
| 228 | #define SKT_DEV_INFO_SIZE(n) \ | ||
| 229 | (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket)) | ||
| 230 | |||
| 186 | int __pxa2xx_drv_pcmcia_probe(struct device *dev) | 231 | int __pxa2xx_drv_pcmcia_probe(struct device *dev) |
| 187 | { | 232 | { |
| 188 | int ret; | 233 | int i, ret; |
| 189 | struct pcmcia_low_level *ops; | 234 | struct pcmcia_low_level *ops; |
| 235 | struct skt_dev_info *sinfo; | ||
| 236 | struct soc_pcmcia_socket *skt; | ||
| 190 | 237 | ||
| 191 | if (!dev || !dev->platform_data) | 238 | if (!dev || !dev->platform_data) |
| 192 | return -ENODEV; | 239 | return -ENODEV; |
| 193 | 240 | ||
| 194 | ops = (struct pcmcia_low_level *)dev->platform_data; | 241 | ops = (struct pcmcia_low_level *)dev->platform_data; |
| 195 | 242 | ||
| 243 | sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL); | ||
| 244 | if (!sinfo) | ||
| 245 | return -ENOMEM; | ||
| 246 | |||
| 247 | sinfo->nskt = ops->nr; | ||
| 248 | |||
| 249 | /* Initialize processor specific parameters */ | ||
| 250 | for (i = 0; i < ops->nr; i++) { | ||
| 251 | skt = &sinfo->skt[i]; | ||
| 252 | |||
| 253 | skt->nr = ops->first + i; | ||
| 254 | skt->irq = NO_IRQ; | ||
| 255 | |||
| 256 | skt->res_skt.start = _PCMCIA(skt->nr); | ||
| 257 | skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1; | ||
| 258 | skt->res_skt.name = skt_names[skt->nr]; | ||
| 259 | skt->res_skt.flags = IORESOURCE_MEM; | ||
| 260 | |||
| 261 | skt->res_io.start = _PCMCIAIO(skt->nr); | ||
| 262 | skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1; | ||
| 263 | skt->res_io.name = "io"; | ||
| 264 | skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY; | ||
| 265 | |||
| 266 | skt->res_mem.start = _PCMCIAMem(skt->nr); | ||
| 267 | skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1; | ||
| 268 | skt->res_mem.name = "memory"; | ||
| 269 | skt->res_mem.flags = IORESOURCE_MEM; | ||
| 270 | |||
| 271 | skt->res_attr.start = _PCMCIAAttr(skt->nr); | ||
| 272 | skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1; | ||
| 273 | skt->res_attr.name = "attribute"; | ||
| 274 | skt->res_attr.flags = IORESOURCE_MEM; | ||
| 275 | } | ||
| 276 | |||
| 196 | /* Provide our PXA2xx specific timing routines. */ | 277 | /* Provide our PXA2xx specific timing routines. */ |
| 197 | ops->set_timing = pxa2xx_pcmcia_set_timing; | 278 | ops->set_timing = pxa2xx_pcmcia_set_timing; |
| 198 | #ifdef CONFIG_CPU_FREQ | 279 | #ifdef CONFIG_CPU_FREQ |
| 199 | ops->frequency_change = pxa2xx_pcmcia_frequency_change; | 280 | ops->frequency_change = pxa2xx_pcmcia_frequency_change; |
| 200 | #endif | 281 | #endif |
| 201 | 282 | ||
| 202 | ret = soc_common_drv_pcmcia_probe(dev, ops, ops->first, ops->nr); | 283 | ret = soc_common_drv_pcmcia_probe(dev, ops, sinfo); |
| 203 | 284 | ||
| 204 | if (!ret) | 285 | if (!ret) |
| 205 | pxa2xx_configure_sockets(dev); | 286 | pxa2xx_configure_sockets(dev); |
diff --git a/drivers/pcmcia/pxa2xx_cm_x255.c b/drivers/pcmcia/pxa2xx_cm_x255.c index 7c8bcb476622..4ed64d8e95e7 100644 --- a/drivers/pcmcia/pxa2xx_cm_x255.c +++ b/drivers/pcmcia/pxa2xx_cm_x255.c | |||
| @@ -16,7 +16,6 @@ | |||
| 16 | #include <linux/gpio.h> | 16 | #include <linux/gpio.h> |
| 17 | 17 | ||
| 18 | #include <asm/mach-types.h> | 18 | #include <asm/mach-types.h> |
| 19 | #include <mach/pxa-regs.h> | ||
| 20 | 19 | ||
| 21 | #include "soc_common.h" | 20 | #include "soc_common.h" |
| 22 | 21 | ||
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c index 6c3aac377126..a7b943d01e34 100644 --- a/drivers/pcmcia/pxa2xx_cm_x270.c +++ b/drivers/pcmcia/pxa2xx_cm_x270.c | |||
| @@ -16,7 +16,6 @@ | |||
| 16 | #include <linux/gpio.h> | 16 | #include <linux/gpio.h> |
| 17 | 17 | ||
| 18 | #include <asm/mach-types.h> | 18 | #include <asm/mach-types.h> |
| 19 | #include <mach/pxa-regs.h> | ||
| 20 | 19 | ||
| 21 | #include "soc_common.h" | 20 | #include "soc_common.h" |
| 22 | 21 | ||
diff --git a/drivers/pcmcia/pxa2xx_e740.c b/drivers/pcmcia/pxa2xx_e740.c index f663a011bf4a..d09c0dc4a31a 100644 --- a/drivers/pcmcia/pxa2xx_e740.c +++ b/drivers/pcmcia/pxa2xx_e740.c | |||
| @@ -16,8 +16,6 @@ | |||
| 16 | #include <linux/interrupt.h> | 16 | #include <linux/interrupt.h> |
| 17 | #include <linux/platform_device.h> | 17 | #include <linux/platform_device.h> |
| 18 | 18 | ||
| 19 | #include <mach/hardware.h> | ||
| 20 | #include <mach/pxa-regs.h> | ||
| 21 | #include <mach/eseries-gpio.h> | 19 | #include <mach/eseries-gpio.h> |
| 22 | 20 | ||
| 23 | #include <asm/irq.h> | 21 | #include <asm/irq.h> |
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c index 37ec55df086e..6cbb1b1f7cfd 100644 --- a/drivers/pcmcia/pxa2xx_lubbock.c +++ b/drivers/pcmcia/pxa2xx_lubbock.c | |||
| @@ -24,7 +24,6 @@ | |||
| 24 | #include <mach/hardware.h> | 24 | #include <mach/hardware.h> |
| 25 | #include <asm/hardware/sa1111.h> | 25 | #include <asm/hardware/sa1111.h> |
| 26 | #include <asm/mach-types.h> | 26 | #include <asm/mach-types.h> |
| 27 | #include <mach/pxa-regs.h> | ||
| 28 | #include <mach/lubbock.h> | 27 | #include <mach/lubbock.h> |
| 29 | 28 | ||
| 30 | #include "sa1111_generic.h" | 29 | #include "sa1111_generic.h" |
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c index 877001db4916..1138551ba8f6 100644 --- a/drivers/pcmcia/pxa2xx_mainstone.c +++ b/drivers/pcmcia/pxa2xx_mainstone.c | |||
| @@ -21,11 +21,10 @@ | |||
| 21 | 21 | ||
| 22 | #include <pcmcia/ss.h> | 22 | #include <pcmcia/ss.h> |
| 23 | 23 | ||
| 24 | #include <mach/hardware.h> | ||
| 25 | #include <asm/mach-types.h> | 24 | #include <asm/mach-types.h> |
| 26 | #include <asm/irq.h> | 25 | #include <asm/irq.h> |
| 27 | 26 | ||
| 28 | #include <mach/pxa-regs.h> | 27 | #include <mach/pxa2xx-regs.h> |
| 29 | #include <mach/mainstone.h> | 28 | #include <mach/mainstone.h> |
| 30 | 29 | ||
| 31 | #include "soc_common.h" | 30 | #include "soc_common.h" |
diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c index 1736c67e547e..5ba9b3664a00 100644 --- a/drivers/pcmcia/pxa2xx_palmld.c +++ b/drivers/pcmcia/pxa2xx_palmld.c | |||
| @@ -98,8 +98,8 @@ static void palmld_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) | |||
| 98 | static struct pcmcia_low_level palmld_pcmcia_ops = { | 98 | static struct pcmcia_low_level palmld_pcmcia_ops = { |
| 99 | .owner = THIS_MODULE, | 99 | .owner = THIS_MODULE, |
| 100 | 100 | ||
| 101 | .first = 0, | 101 | .first = 1, |
| 102 | .nr = 2, | 102 | .nr = 1, |
| 103 | 103 | ||
| 104 | .hw_init = palmld_pcmcia_hw_init, | 104 | .hw_init = palmld_pcmcia_hw_init, |
| 105 | .hw_shutdown = palmld_pcmcia_hw_shutdown, | 105 | .hw_shutdown = palmld_pcmcia_hw_shutdown, |
diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c index 36c7a0b324d2..e0e5cb339b4a 100644 --- a/drivers/pcmcia/pxa2xx_trizeps4.c +++ b/drivers/pcmcia/pxa2xx_trizeps4.c | |||
| @@ -22,8 +22,7 @@ | |||
| 22 | #include <asm/mach-types.h> | 22 | #include <asm/mach-types.h> |
| 23 | #include <asm/irq.h> | 23 | #include <asm/irq.h> |
| 24 | 24 | ||
| 25 | #include <mach/hardware.h> | 25 | #include <mach/pxa2xx-regs.h> |
| 26 | #include <mach/pxa-regs.h> | ||
| 27 | #include <mach/trizeps4.h> | 26 | #include <mach/trizeps4.h> |
| 28 | 27 | ||
| 29 | #include "soc_common.h" | 28 | #include "soc_common.h" |
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c index dd10481be7bf..17871360fe99 100644 --- a/drivers/pcmcia/pxa2xx_viper.c +++ b/drivers/pcmcia/pxa2xx_viper.c | |||
| @@ -26,7 +26,6 @@ | |||
| 26 | 26 | ||
| 27 | #include <asm/irq.h> | 27 | #include <asm/irq.h> |
| 28 | 28 | ||
| 29 | #include <mach/pxa-regs.h> | ||
| 30 | #include <mach/viper.h> | 29 | #include <mach/viper.h> |
| 31 | #include <asm/mach-types.h> | 30 | #include <asm/mach-types.h> |
| 32 | 31 | ||
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c index 6de4e1b41d60..0cc3748f3758 100644 --- a/drivers/pcmcia/sa1100_h3600.c +++ b/drivers/pcmcia/sa1100_h3600.c | |||
| @@ -37,9 +37,9 @@ static void h3600_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) | |||
| 37 | soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); | 37 | soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); |
| 38 | 38 | ||
| 39 | /* Disable CF bus: */ | 39 | /* Disable CF bus: */ |
| 40 | clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON); | 40 | assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0); |
| 41 | clr_h3600_egpio(IPAQ_EGPIO_OPT_ON); | 41 | assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0); |
| 42 | set_h3600_egpio(IPAQ_EGPIO_OPT_RESET); | 42 | assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1); |
| 43 | } | 43 | } |
| 44 | 44 | ||
| 45 | static void | 45 | static void |
| @@ -79,10 +79,7 @@ h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_ | |||
| 79 | return -1; | 79 | return -1; |
| 80 | } | 80 | } |
| 81 | 81 | ||
| 82 | if (state->flags & SS_RESET) | 82 | assign_h3600_egpio(IPAQ_EGPIO_CARD_RESET, !!(state->flags & SS_RESET)); |
| 83 | set_h3600_egpio(IPAQ_EGPIO_CARD_RESET); | ||
| 84 | else | ||
| 85 | clr_h3600_egpio(IPAQ_EGPIO_CARD_RESET); | ||
| 86 | 83 | ||
| 87 | /* Silently ignore Vpp, output enable, speaker enable. */ | 84 | /* Silently ignore Vpp, output enable, speaker enable. */ |
| 88 | 85 | ||
| @@ -92,9 +89,9 @@ h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_ | |||
| 92 | static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt) | 89 | static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt) |
| 93 | { | 90 | { |
| 94 | /* Enable CF bus: */ | 91 | /* Enable CF bus: */ |
| 95 | set_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON); | 92 | assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 1); |
| 96 | set_h3600_egpio(IPAQ_EGPIO_OPT_ON); | 93 | assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 1); |
| 97 | clr_h3600_egpio(IPAQ_EGPIO_OPT_RESET); | 94 | assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 0); |
| 98 | 95 | ||
| 99 | msleep(10); | 96 | msleep(10); |
| 100 | 97 | ||
| @@ -112,10 +109,10 @@ static void h3600_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) | |||
| 112 | * socket 0 then socket 1. | 109 | * socket 0 then socket 1. |
| 113 | */ | 110 | */ |
| 114 | if (skt->nr == 1) { | 111 | if (skt->nr == 1) { |
| 115 | clr_h3600_egpio(IPAQ_EGPIO_OPT_ON); | 112 | assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0); |
| 116 | clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON); | 113 | assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0); |
| 117 | /* hmm, does this suck power? */ | 114 | /* hmm, does this suck power? */ |
| 118 | set_h3600_egpio(IPAQ_EGPIO_OPT_RESET); | 115 | assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1); |
| 119 | } | 116 | } |
| 120 | } | 117 | } |
| 121 | 118 | ||
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c index 6924d0ea8d32..401052a21ce8 100644 --- a/drivers/pcmcia/sa1111_generic.c +++ b/drivers/pcmcia/sa1111_generic.c | |||
| @@ -11,12 +11,12 @@ | |||
| 11 | #include <linux/device.h> | 11 | #include <linux/device.h> |
| 12 | #include <linux/interrupt.h> | 12 | #include <linux/interrupt.h> |
| 13 | #include <linux/init.h> | 13 | #include <linux/init.h> |
| 14 | #include <linux/io.h> | ||
| 14 | 15 | ||
| 15 | #include <pcmcia/ss.h> | 16 | #include <pcmcia/ss.h> |
| 16 | 17 | ||
| 17 | #include <mach/hardware.h> | 18 | #include <mach/hardware.h> |
| 18 | #include <asm/hardware/sa1111.h> | 19 | #include <asm/hardware/sa1111.h> |
| 19 | #include <asm/io.h> | ||
| 20 | #include <asm/irq.h> | 20 | #include <asm/irq.h> |
| 21 | 21 | ||
| 22 | #include "sa1111_generic.h" | 22 | #include "sa1111_generic.h" |
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c index 7cb1273202cc..e15d59f2d8a9 100644 --- a/drivers/pcmcia/sa11xx_base.c +++ b/drivers/pcmcia/sa11xx_base.c | |||
| @@ -36,9 +36,9 @@ | |||
| 36 | #include <linux/ioport.h> | 36 | #include <linux/ioport.h> |
| 37 | #include <linux/kernel.h> | 37 | #include <linux/kernel.h> |
| 38 | #include <linux/spinlock.h> | 38 | #include <linux/spinlock.h> |
| 39 | #include <linux/io.h> | ||
| 39 | 40 | ||
| 40 | #include <mach/hardware.h> | 41 | #include <mach/hardware.h> |
| 41 | #include <asm/io.h> | ||
| 42 | #include <asm/irq.h> | 42 | #include <asm/irq.h> |
| 43 | #include <asm/system.h> | 43 | #include <asm/system.h> |
| 44 | 44 | ||
| @@ -163,9 +163,55 @@ sa1100_pcmcia_show_timing(struct soc_pcmcia_socket *skt, char *buf) | |||
| 163 | return p - buf; | 163 | return p - buf; |
| 164 | } | 164 | } |
| 165 | 165 | ||
| 166 | static const char *skt_names[] = { | ||
| 167 | "PCMCIA socket 0", | ||
| 168 | "PCMCIA socket 1", | ||
| 169 | }; | ||
| 170 | |||
| 171 | #define SKT_DEV_INFO_SIZE(n) \ | ||
| 172 | (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket)) | ||
| 173 | |||
| 166 | int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, | 174 | int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, |
| 167 | int first, int nr) | 175 | int first, int nr) |
| 168 | { | 176 | { |
| 177 | struct skt_dev_info *sinfo; | ||
| 178 | struct soc_pcmcia_socket *skt; | ||
| 179 | int i; | ||
| 180 | |||
| 181 | sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL); | ||
| 182 | if (!sinfo) | ||
| 183 | return -ENOMEM; | ||
| 184 | |||
| 185 | sinfo->nskt = nr; | ||
| 186 | |||
| 187 | /* Initiliaze processor specific parameters */ | ||
| 188 | for (i = 0; i < nr; i++) { | ||
| 189 | skt = &sinfo->skt[i]; | ||
| 190 | |||
| 191 | skt->nr = first + i; | ||
| 192 | skt->irq = NO_IRQ; | ||
| 193 | |||
| 194 | skt->res_skt.start = _PCMCIA(skt->nr); | ||
| 195 | skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1; | ||
| 196 | skt->res_skt.name = skt_names[skt->nr]; | ||
| 197 | skt->res_skt.flags = IORESOURCE_MEM; | ||
| 198 | |||
| 199 | skt->res_io.start = _PCMCIAIO(skt->nr); | ||
| 200 | skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1; | ||
| 201 | skt->res_io.name = "io"; | ||
| 202 | skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY; | ||
| 203 | |||
| 204 | skt->res_mem.start = _PCMCIAMem(skt->nr); | ||
| 205 | skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1; | ||
| 206 | skt->res_mem.name = "memory"; | ||
| 207 | skt->res_mem.flags = IORESOURCE_MEM; | ||
| 208 | |||
| 209 | skt->res_attr.start = _PCMCIAAttr(skt->nr); | ||
| 210 | skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1; | ||
| 211 | skt->res_attr.name = "attribute"; | ||
| 212 | skt->res_attr.flags = IORESOURCE_MEM; | ||
| 213 | } | ||
| 214 | |||
| 169 | /* | 215 | /* |
| 170 | * set default MECR calculation if the board specific | 216 | * set default MECR calculation if the board specific |
| 171 | * code did not specify one... | 217 | * code did not specify one... |
| @@ -180,7 +226,7 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, | |||
| 180 | ops->frequency_change = sa1100_pcmcia_frequency_change; | 226 | ops->frequency_change = sa1100_pcmcia_frequency_change; |
| 181 | #endif | 227 | #endif |
| 182 | 228 | ||
| 183 | return soc_common_drv_pcmcia_probe(dev, ops, first, nr); | 229 | return soc_common_drv_pcmcia_probe(dev, ops, sinfo); |
| 184 | } | 230 | } |
| 185 | EXPORT_SYMBOL(sa11xx_drv_pcmcia_probe); | 231 | EXPORT_SYMBOL(sa11xx_drv_pcmcia_probe); |
| 186 | 232 | ||
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index f49ac6666153..163cf98e2386 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c | |||
| @@ -49,11 +49,6 @@ | |||
| 49 | 49 | ||
| 50 | #include "soc_common.h" | 50 | #include "soc_common.h" |
| 51 | 51 | ||
| 52 | /* FIXME: platform dependent resource declaration has to move out of this file */ | ||
| 53 | #ifdef CONFIG_ARCH_PXA | ||
| 54 | #include <mach/pxa-regs.h> | ||
| 55 | #endif | ||
| 56 | |||
| 57 | #ifdef CONFIG_PCMCIA_DEBUG | 52 | #ifdef CONFIG_PCMCIA_DEBUG |
| 58 | 53 | ||
| 59 | static int pc_debug; | 54 | static int pc_debug; |
| @@ -581,19 +576,6 @@ EXPORT_SYMBOL(soc_pcmcia_enable_irqs); | |||
| 581 | LIST_HEAD(soc_pcmcia_sockets); | 576 | LIST_HEAD(soc_pcmcia_sockets); |
| 582 | static DEFINE_MUTEX(soc_pcmcia_sockets_lock); | 577 | static DEFINE_MUTEX(soc_pcmcia_sockets_lock); |
| 583 | 578 | ||
| 584 | static const char *skt_names[] = { | ||
| 585 | "PCMCIA socket 0", | ||
| 586 | "PCMCIA socket 1", | ||
| 587 | }; | ||
| 588 | |||
| 589 | struct skt_dev_info { | ||
| 590 | int nskt; | ||
| 591 | struct soc_pcmcia_socket skt[0]; | ||
| 592 | }; | ||
| 593 | |||
| 594 | #define SKT_DEV_INFO_SIZE(n) \ | ||
| 595 | (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket)) | ||
| 596 | |||
| 597 | #ifdef CONFIG_CPU_FREQ | 579 | #ifdef CONFIG_CPU_FREQ |
| 598 | static int | 580 | static int |
| 599 | soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data) | 581 | soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data) |
| @@ -637,26 +619,18 @@ static int soc_pcmcia_cpufreq_register(void) { return 0; } | |||
| 637 | static void soc_pcmcia_cpufreq_unregister(void) {} | 619 | static void soc_pcmcia_cpufreq_unregister(void) {} |
| 638 | #endif | 620 | #endif |
| 639 | 621 | ||
| 640 | int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr) | 622 | int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, |
| 623 | struct skt_dev_info *sinfo) | ||
| 641 | { | 624 | { |
| 642 | struct skt_dev_info *sinfo; | ||
| 643 | struct soc_pcmcia_socket *skt; | 625 | struct soc_pcmcia_socket *skt; |
| 644 | int ret, i; | 626 | int ret, i; |
| 645 | 627 | ||
| 646 | mutex_lock(&soc_pcmcia_sockets_lock); | 628 | mutex_lock(&soc_pcmcia_sockets_lock); |
| 647 | 629 | ||
| 648 | sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL); | ||
| 649 | if (!sinfo) { | ||
| 650 | ret = -ENOMEM; | ||
| 651 | goto out; | ||
| 652 | } | ||
| 653 | |||
| 654 | sinfo->nskt = nr; | ||
| 655 | |||
| 656 | /* | 630 | /* |
| 657 | * Initialise the per-socket structure. | 631 | * Initialise the per-socket structure. |
| 658 | */ | 632 | */ |
| 659 | for (i = 0; i < nr; i++) { | 633 | for (i = 0; i < sinfo->nskt; i++) { |
| 660 | skt = &sinfo->skt[i]; | 634 | skt = &sinfo->skt[i]; |
| 661 | 635 | ||
| 662 | skt->socket.ops = &soc_common_pcmcia_operations; | 636 | skt->socket.ops = &soc_common_pcmcia_operations; |
| @@ -668,43 +642,21 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops | |||
| 668 | skt->poll_timer.data = (unsigned long)skt; | 642 | skt->poll_timer.data = (unsigned long)skt; |
| 669 | skt->poll_timer.expires = jiffies + SOC_PCMCIA_POLL_PERIOD; | 643 | skt->poll_timer.expires = jiffies + SOC_PCMCIA_POLL_PERIOD; |
| 670 | 644 | ||
| 671 | skt->nr = first + i; | ||
| 672 | skt->irq = NO_IRQ; | ||
| 673 | skt->dev = dev; | 645 | skt->dev = dev; |
| 674 | skt->ops = ops; | 646 | skt->ops = ops; |
| 675 | 647 | ||
| 676 | skt->res_skt.start = _PCMCIA(skt->nr); | ||
| 677 | skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1; | ||
| 678 | skt->res_skt.name = skt_names[skt->nr]; | ||
| 679 | skt->res_skt.flags = IORESOURCE_MEM; | ||
| 680 | |||
| 681 | ret = request_resource(&iomem_resource, &skt->res_skt); | 648 | ret = request_resource(&iomem_resource, &skt->res_skt); |
| 682 | if (ret) | 649 | if (ret) |
| 683 | goto out_err_1; | 650 | goto out_err_1; |
| 684 | 651 | ||
| 685 | skt->res_io.start = _PCMCIAIO(skt->nr); | ||
| 686 | skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1; | ||
| 687 | skt->res_io.name = "io"; | ||
| 688 | skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY; | ||
| 689 | |||
| 690 | ret = request_resource(&skt->res_skt, &skt->res_io); | 652 | ret = request_resource(&skt->res_skt, &skt->res_io); |
| 691 | if (ret) | 653 | if (ret) |
| 692 | goto out_err_2; | 654 | goto out_err_2; |
| 693 | 655 | ||
| 694 | skt->res_mem.start = _PCMCIAMem(skt->nr); | ||
| 695 | skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1; | ||
| 696 | skt->res_mem.name = "memory"; | ||
| 697 | skt->res_mem.flags = IORESOURCE_MEM; | ||
| 698 | |||
| 699 | ret = request_resource(&skt->res_skt, &skt->res_mem); | 656 | ret = request_resource(&skt->res_skt, &skt->res_mem); |
| 700 | if (ret) | 657 | if (ret) |
| 701 | goto out_err_3; | 658 | goto out_err_3; |
| 702 | 659 | ||
| 703 | skt->res_attr.start = _PCMCIAAttr(skt->nr); | ||
| 704 | skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1; | ||
| 705 | skt->res_attr.name = "attribute"; | ||
| 706 | skt->res_attr.flags = IORESOURCE_MEM; | ||
| 707 | |||
| 708 | ret = request_resource(&skt->res_skt, &skt->res_attr); | 660 | ret = request_resource(&skt->res_skt, &skt->res_attr); |
| 709 | if (ret) | 661 | if (ret) |
| 710 | goto out_err_4; | 662 | goto out_err_4; |
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h index 38c67375f363..290e143839ee 100644 --- a/drivers/pcmcia/soc_common.h +++ b/drivers/pcmcia/soc_common.h | |||
| @@ -58,6 +58,11 @@ struct soc_pcmcia_socket { | |||
| 58 | struct list_head node; | 58 | struct list_head node; |
| 59 | }; | 59 | }; |
| 60 | 60 | ||
| 61 | struct skt_dev_info { | ||
| 62 | int nskt; | ||
| 63 | struct soc_pcmcia_socket skt[0]; | ||
| 64 | }; | ||
| 65 | |||
| 61 | struct pcmcia_state { | 66 | struct pcmcia_state { |
| 62 | unsigned detect: 1, | 67 | unsigned detect: 1, |
| 63 | ready: 1, | 68 | ready: 1, |
| @@ -132,7 +137,7 @@ extern void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *, struct soc_ | |||
| 132 | 137 | ||
| 133 | extern struct list_head soc_pcmcia_sockets; | 138 | extern struct list_head soc_pcmcia_sockets; |
| 134 | 139 | ||
| 135 | extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr); | 140 | extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, struct skt_dev_info *sinfo); |
| 136 | extern int soc_common_drv_pcmcia_remove(struct device *dev); | 141 | extern int soc_common_drv_pcmcia_remove(struct device *dev); |
| 137 | 142 | ||
| 138 | 143 | ||
diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c index 45f12dcd3716..e0263d2005ee 100644 --- a/drivers/rtc/rtc-mv.c +++ b/drivers/rtc/rtc-mv.c | |||
| @@ -12,6 +12,7 @@ | |||
| 12 | #include <linux/bcd.h> | 12 | #include <linux/bcd.h> |
| 13 | #include <linux/io.h> | 13 | #include <linux/io.h> |
| 14 | #include <linux/platform_device.h> | 14 | #include <linux/platform_device.h> |
| 15 | #include <linux/delay.h> | ||
| 15 | 16 | ||
| 16 | 17 | ||
| 17 | #define RTC_TIME_REG_OFFS 0 | 18 | #define RTC_TIME_REG_OFFS 0 |
| @@ -119,6 +120,16 @@ static int __init mv_rtc_probe(struct platform_device *pdev) | |||
| 119 | return -EINVAL; | 120 | return -EINVAL; |
| 120 | } | 121 | } |
| 121 | 122 | ||
| 123 | /* make sure it is actually functional */ | ||
| 124 | if (rtc_time == 0x01000000) { | ||
| 125 | ssleep(1); | ||
| 126 | rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS); | ||
| 127 | if (rtc_time == 0x01000000) { | ||
| 128 | dev_err(&pdev->dev, "internal RTC not ticking\n"); | ||
| 129 | return -ENODEV; | ||
| 130 | } | ||
| 131 | } | ||
| 132 | |||
| 122 | platform_set_drvdata(pdev, pdata); | 133 | platform_set_drvdata(pdev, pdata); |
| 123 | pdata->rtc = rtc_device_register(pdev->name, &pdev->dev, | 134 | pdata->rtc = rtc_device_register(pdev->name, &pdev->dev, |
| 124 | &mv_rtc_ops, THIS_MODULE); | 135 | &mv_rtc_ops, THIS_MODULE); |
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index d26a5f82aaba..4f247e4dd3f9 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c | |||
| @@ -35,7 +35,8 @@ | |||
| 35 | #include <asm/irq.h> | 35 | #include <asm/irq.h> |
| 36 | 36 | ||
| 37 | #ifdef CONFIG_ARCH_PXA | 37 | #ifdef CONFIG_ARCH_PXA |
| 38 | #include <mach/pxa-regs.h> | 38 | #include <mach/regs-rtc.h> |
| 39 | #include <mach/regs-ost.h> | ||
| 39 | #endif | 40 | #endif |
| 40 | 41 | ||
| 41 | #define RTC_DEF_DIVIDER 32768 - 1 | 42 | #define RTC_DEF_DIVIDER 32768 - 1 |
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c index 68a64123af8f..c9902b5c1f2b 100644 --- a/drivers/scsi/arm/cumana_2.c +++ b/drivers/scsi/arm/cumana_2.c | |||
| @@ -318,7 +318,7 @@ cumanascsi_2_set_proc_info(struct Scsi_Host *host, char *buffer, int length) | |||
| 318 | { | 318 | { |
| 319 | int ret = length; | 319 | int ret = length; |
| 320 | 320 | ||
| 321 | if (length >= 11 && strcmp(buffer, "CUMANASCSI2") == 0) { | 321 | if (length >= 11 && strncmp(buffer, "CUMANASCSI2", 11) == 0) { |
| 322 | buffer += 11; | 322 | buffer += 11; |
| 323 | length -= 11; | 323 | length -= 11; |
| 324 | 324 | ||
| @@ -390,7 +390,8 @@ static struct scsi_host_template cumanascsi2_template = { | |||
| 390 | .eh_abort_handler = fas216_eh_abort, | 390 | .eh_abort_handler = fas216_eh_abort, |
| 391 | .can_queue = 1, | 391 | .can_queue = 1, |
| 392 | .this_id = 7, | 392 | .this_id = 7, |
| 393 | .sg_tablesize = SG_ALL, | 393 | .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, |
| 394 | .dma_boundary = IOMD_DMA_BOUNDARY, | ||
| 394 | .cmd_per_lun = 1, | 395 | .cmd_per_lun = 1, |
| 395 | .use_clustering = DISABLE_CLUSTERING, | 396 | .use_clustering = DISABLE_CLUSTERING, |
| 396 | .proc_name = "cumanascsi2", | 397 | .proc_name = "cumanascsi2", |
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c index bb2477b3fb0b..d8435132f461 100644 --- a/drivers/scsi/arm/eesox.c +++ b/drivers/scsi/arm/eesox.c | |||
| @@ -508,7 +508,8 @@ static struct scsi_host_template eesox_template = { | |||
| 508 | .eh_abort_handler = fas216_eh_abort, | 508 | .eh_abort_handler = fas216_eh_abort, |
| 509 | .can_queue = 1, | 509 | .can_queue = 1, |
| 510 | .this_id = 7, | 510 | .this_id = 7, |
| 511 | .sg_tablesize = SG_ALL, | 511 | .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, |
| 512 | .dma_boundary = IOMD_DMA_BOUNDARY, | ||
| 512 | .cmd_per_lun = 1, | 513 | .cmd_per_lun = 1, |
| 513 | .use_clustering = DISABLE_CLUSTERING, | 514 | .use_clustering = DISABLE_CLUSTERING, |
| 514 | .proc_name = "eesox", | 515 | .proc_name = "eesox", |
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c index d9a546d1917c..e2297b4c1b9e 100644 --- a/drivers/scsi/arm/powertec.c +++ b/drivers/scsi/arm/powertec.c | |||
| @@ -302,7 +302,8 @@ static struct scsi_host_template powertecscsi_template = { | |||
| 302 | 302 | ||
| 303 | .can_queue = 8, | 303 | .can_queue = 8, |
| 304 | .this_id = 7, | 304 | .this_id = 7, |
| 305 | .sg_tablesize = SG_ALL, | 305 | .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, |
| 306 | .dma_boundary = IOMD_DMA_BOUNDARY, | ||
| 306 | .cmd_per_lun = 2, | 307 | .cmd_per_lun = 2, |
| 307 | .use_clustering = ENABLE_CLUSTERING, | 308 | .use_clustering = ENABLE_CLUSTERING, |
| 308 | .proc_name = "powertec", | 309 | .proc_name = "powertec", |
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index f31c6698419c..cb6d85d7ff43 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c | |||
| @@ -14,8 +14,8 @@ | |||
| 14 | #include <linux/tty_flip.h> | 14 | #include <linux/tty_flip.h> |
| 15 | #include <linux/serial_core.h> | 15 | #include <linux/serial_core.h> |
| 16 | #include <linux/serial.h> | 16 | #include <linux/serial.h> |
| 17 | #include <linux/io.h> | ||
| 17 | 18 | ||
| 18 | #include <asm/io.h> | ||
| 19 | #include <asm/irq.h> | 19 | #include <asm/irq.h> |
| 20 | #include <asm/mach-types.h> | 20 | #include <asm/mach-types.h> |
| 21 | #include <asm/hardware/dec21285.h> | 21 | #include <asm/hardware/dec21285.h> |
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 7d7f576da202..9be11b0963f2 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig | |||
| @@ -628,7 +628,7 @@ config SERIAL_MPSC_CONSOLE | |||
| 628 | 628 | ||
| 629 | config SERIAL_PXA | 629 | config SERIAL_PXA |
| 630 | bool "PXA serial port support" | 630 | bool "PXA serial port support" |
| 631 | depends on ARM && ARCH_PXA | 631 | depends on ARCH_PXA || ARCH_MMP |
| 632 | select SERIAL_CORE | 632 | select SERIAL_CORE |
| 633 | help | 633 | help |
| 634 | If you have a machine based on an Intel XScale PXA2xx CPU you | 634 | If you have a machine based on an Intel XScale PXA2xx CPU you |
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c index 459f3420a429..80e76426131d 100644 --- a/drivers/serial/clps711x.c +++ b/drivers/serial/clps711x.c | |||
| @@ -38,9 +38,9 @@ | |||
| 38 | #include <linux/tty_flip.h> | 38 | #include <linux/tty_flip.h> |
| 39 | #include <linux/serial_core.h> | 39 | #include <linux/serial_core.h> |
| 40 | #include <linux/serial.h> | 40 | #include <linux/serial.h> |
| 41 | #include <linux/io.h> | ||
| 41 | 42 | ||
| 42 | #include <mach/hardware.h> | 43 | #include <mach/hardware.h> |
| 43 | #include <asm/io.h> | ||
| 44 | #include <asm/irq.h> | 44 | #include <asm/irq.h> |
| 45 | #include <asm/hardware/clps7111.h> | 45 | #include <asm/hardware/clps7111.h> |
| 46 | 46 | ||
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index a50954612b60..9f460b175c50 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c | |||
| @@ -1129,7 +1129,7 @@ static int serial_imx_probe(struct platform_device *pdev) | |||
| 1129 | sport->timer.function = imx_timeout; | 1129 | sport->timer.function = imx_timeout; |
| 1130 | sport->timer.data = (unsigned long)sport; | 1130 | sport->timer.data = (unsigned long)sport; |
| 1131 | 1131 | ||
| 1132 | sport->clk = clk_get(&pdev->dev, "uart_clk"); | 1132 | sport->clk = clk_get(&pdev->dev, "uart"); |
| 1133 | if (IS_ERR(sport->clk)) { | 1133 | if (IS_ERR(sport->clk)) { |
| 1134 | ret = PTR_ERR(sport->clk); | 1134 | ret = PTR_ERR(sport->clk); |
| 1135 | goto unmap; | 1135 | goto unmap; |
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index f6e3b86bb0be..a48a8a13d87b 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c | |||
| @@ -43,13 +43,7 @@ | |||
| 43 | #include <linux/tty_flip.h> | 43 | #include <linux/tty_flip.h> |
| 44 | #include <linux/serial_core.h> | 44 | #include <linux/serial_core.h> |
| 45 | #include <linux/clk.h> | 45 | #include <linux/clk.h> |
| 46 | 46 | #include <linux/io.h> | |
| 47 | #include <asm/io.h> | ||
| 48 | #include <mach/hardware.h> | ||
| 49 | #include <asm/irq.h> | ||
| 50 | #include <mach/pxa-regs.h> | ||
| 51 | #include <mach/regs-uart.h> | ||
| 52 | |||
| 53 | 47 | ||
| 54 | struct uart_pxa_port { | 48 | struct uart_pxa_port { |
| 55 | struct uart_port port; | 49 | struct uart_port port; |
| @@ -491,7 +485,7 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, | |||
| 491 | * Ensure the port will be enabled. | 485 | * Ensure the port will be enabled. |
| 492 | * This is required especially for serial console. | 486 | * This is required especially for serial console. |
| 493 | */ | 487 | */ |
| 494 | up->ier |= IER_UUE; | 488 | up->ier |= UART_IER_UUE; |
| 495 | 489 | ||
| 496 | /* | 490 | /* |
| 497 | * Update the per-port timeout. | 491 | * Update the per-port timeout. |
| @@ -784,19 +778,15 @@ static int serial_pxa_probe(struct platform_device *dev) | |||
| 784 | sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; | 778 | sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; |
| 785 | sport->port.uartclk = clk_get_rate(sport->clk); | 779 | sport->port.uartclk = clk_get_rate(sport->clk); |
| 786 | 780 | ||
| 787 | /* | 781 | switch (dev->id) { |
| 788 | * Is it worth keeping this? | 782 | case 0: sport->name = "FFUART"; break; |
| 789 | */ | 783 | case 1: sport->name = "BTUART"; break; |
| 790 | if (mmres->start == __PREG(FFUART)) | 784 | case 2: sport->name = "STUART"; break; |
| 791 | sport->name = "FFUART"; | 785 | case 3: sport->name = "HWUART"; break; |
| 792 | else if (mmres->start == __PREG(BTUART)) | 786 | default: |
| 793 | sport->name = "BTUART"; | ||
| 794 | else if (mmres->start == __PREG(STUART)) | ||
| 795 | sport->name = "STUART"; | ||
| 796 | else if (mmres->start == __PREG(HWUART)) | ||
| 797 | sport->name = "HWUART"; | ||
| 798 | else | ||
| 799 | sport->name = "???"; | 787 | sport->name = "???"; |
| 788 | break; | ||
| 789 | } | ||
| 800 | 790 | ||
| 801 | sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1); | 791 | sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1); |
| 802 | if (!sport->port.membase) { | 792 | if (!sport->port.membase) { |
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index b24a25ea6bc5..94530f01521e 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c | |||
| @@ -36,8 +36,8 @@ | |||
| 36 | #include <linux/tty_flip.h> | 36 | #include <linux/tty_flip.h> |
| 37 | #include <linux/serial_core.h> | 37 | #include <linux/serial_core.h> |
| 38 | #include <linux/serial.h> | 38 | #include <linux/serial.h> |
| 39 | #include <linux/io.h> | ||
| 39 | 40 | ||
| 40 | #include <asm/io.h> | ||
| 41 | #include <asm/irq.h> | 41 | #include <asm/irq.h> |
| 42 | #include <mach/hardware.h> | 42 | #include <mach/hardware.h> |
| 43 | #include <asm/mach/serial_sa1100.h> | 43 | #include <asm/mach/serial_sa1100.h> |
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index 1c65e380c845..d6d0c5d241ce 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c | |||
| @@ -1021,13 +1021,13 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev) | |||
| 1021 | spin_lock_init(&mcspi->lock); | 1021 | spin_lock_init(&mcspi->lock); |
| 1022 | INIT_LIST_HEAD(&mcspi->msg_queue); | 1022 | INIT_LIST_HEAD(&mcspi->msg_queue); |
| 1023 | 1023 | ||
| 1024 | mcspi->ick = clk_get(&pdev->dev, "mcspi_ick"); | 1024 | mcspi->ick = clk_get(&pdev->dev, "ick"); |
| 1025 | if (IS_ERR(mcspi->ick)) { | 1025 | if (IS_ERR(mcspi->ick)) { |
| 1026 | dev_dbg(&pdev->dev, "can't get mcspi_ick\n"); | 1026 | dev_dbg(&pdev->dev, "can't get mcspi_ick\n"); |
| 1027 | status = PTR_ERR(mcspi->ick); | 1027 | status = PTR_ERR(mcspi->ick); |
| 1028 | goto err1a; | 1028 | goto err1a; |
| 1029 | } | 1029 | } |
| 1030 | mcspi->fck = clk_get(&pdev->dev, "mcspi_fck"); | 1030 | mcspi->fck = clk_get(&pdev->dev, "fck"); |
| 1031 | if (IS_ERR(mcspi->fck)) { | 1031 | if (IS_ERR(mcspi->fck)) { |
| 1032 | dev_dbg(&pdev->dev, "can't get mcspi_fck\n"); | 1032 | dev_dbg(&pdev->dev, "can't get mcspi_fck\n"); |
| 1033 | status = PTR_ERR(mcspi->fck); | 1033 | status = PTR_ERR(mcspi->fck); |
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c index 60b5381c65c4..fe8b9ac0ccef 100644 --- a/drivers/spi/omap_uwire.c +++ b/drivers/spi/omap_uwire.c | |||
| @@ -506,11 +506,12 @@ static int __init uwire_probe(struct platform_device *pdev) | |||
| 506 | 506 | ||
| 507 | dev_set_drvdata(&pdev->dev, uwire); | 507 | dev_set_drvdata(&pdev->dev, uwire); |
| 508 | 508 | ||
| 509 | uwire->ck = clk_get(&pdev->dev, "armxor_ck"); | 509 | uwire->ck = clk_get(&pdev->dev, "fck"); |
| 510 | if (!uwire->ck || IS_ERR(uwire->ck)) { | 510 | if (IS_ERR(uwire->ck)) { |
| 511 | dev_dbg(&pdev->dev, "no mpu_xor_clk ?\n"); | 511 | status = PTR_ERR(uwire->ck); |
| 512 | dev_dbg(&pdev->dev, "no functional clock?\n"); | ||
| 512 | spi_master_put(master); | 513 | spi_master_put(master); |
| 513 | return -ENODEV; | 514 | return status; |
| 514 | } | 515 | } |
| 515 | clk_enable(uwire->ck); | 516 | clk_enable(uwire->ck); |
| 516 | 517 | ||
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index ec24f2d16f3c..33fcef3150d4 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c | |||
| @@ -34,8 +34,6 @@ | |||
| 34 | #include <asm/delay.h> | 34 | #include <asm/delay.h> |
| 35 | 35 | ||
| 36 | #include <mach/dma.h> | 36 | #include <mach/dma.h> |
| 37 | #include <mach/hardware.h> | ||
| 38 | #include <mach/pxa-regs.h> | ||
| 39 | #include <mach/regs-ssp.h> | 37 | #include <mach/regs-ssp.h> |
| 40 | #include <mach/ssp.h> | 38 | #include <mach/ssp.h> |
| 41 | #include <mach/pxa2xx_spi.h> | 39 | #include <mach/pxa2xx_spi.h> |
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index fb3055f084b5..7cf74f8c2db1 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c | |||
| @@ -28,8 +28,6 @@ | |||
| 28 | #include <linux/signal.h> | 28 | #include <linux/signal.h> |
| 29 | #include <linux/platform_device.h> | 29 | #include <linux/platform_device.h> |
| 30 | 30 | ||
| 31 | #include <mach/hardware.h> | ||
| 32 | |||
| 33 | static struct clk *usb_host_clock; | 31 | static struct clk *usb_host_clock; |
| 34 | 32 | ||
| 35 | static void ep93xx_start_hc(struct device *dev) | 33 | static void ep93xx_start_hc(struct device *dev) |
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index fb19803060cf..41c27a44bd82 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig | |||
| @@ -397,7 +397,7 @@ config FB_SA1100 | |||
| 397 | 397 | ||
| 398 | config FB_IMX | 398 | config FB_IMX |
| 399 | tristate "Motorola i.MX LCD support" | 399 | tristate "Motorola i.MX LCD support" |
| 400 | depends on FB && ARM && ARCH_IMX | 400 | depends on FB && (ARCH_IMX || ARCH_MX2) |
| 401 | select FB_CFB_FILLRECT | 401 | select FB_CFB_FILLRECT |
| 402 | select FB_CFB_COPYAREA | 402 | select FB_CFB_COPYAREA |
| 403 | select FB_CFB_IMAGEBLIT | 403 | select FB_CFB_IMAGEBLIT |
| @@ -2120,16 +2120,30 @@ config FB_PRE_INIT_FB | |||
| 2120 | the bootloader. | 2120 | the bootloader. |
| 2121 | 2121 | ||
| 2122 | config FB_MX3 | 2122 | config FB_MX3 |
| 2123 | tristate "MX3 Framebuffer support" | 2123 | tristate "MX3 Framebuffer support" |
| 2124 | depends on FB && MX3_IPU | 2124 | depends on FB && MX3_IPU |
| 2125 | select FB_CFB_FILLRECT | 2125 | select FB_CFB_FILLRECT |
| 2126 | select FB_CFB_COPYAREA | 2126 | select FB_CFB_COPYAREA |
| 2127 | select FB_CFB_IMAGEBLIT | 2127 | select FB_CFB_IMAGEBLIT |
| 2128 | default y | 2128 | default y |
| 2129 | help | 2129 | help |
| 2130 | This is a framebuffer device for the i.MX31 LCD Controller. So | 2130 | This is a framebuffer device for the i.MX31 LCD Controller. So |
| 2131 | far only synchronous displays are supported. If you plan to use | 2131 | far only synchronous displays are supported. If you plan to use |
| 2132 | an LCD display with your i.MX31 system, say Y here. | 2132 | an LCD display with your i.MX31 system, say Y here. |
| 2133 | |||
| 2134 | config FB_BROADSHEET | ||
| 2135 | tristate "E-Ink Broadsheet/Epson S1D13521 controller support" | ||
| 2136 | depends on FB | ||
| 2137 | select FB_SYS_FILLRECT | ||
| 2138 | select FB_SYS_COPYAREA | ||
| 2139 | select FB_SYS_IMAGEBLIT | ||
| 2140 | select FB_SYS_FOPS | ||
| 2141 | select FB_DEFERRED_IO | ||
| 2142 | help | ||
| 2143 | This driver implements support for the E-Ink Broadsheet | ||
| 2144 | controller. The release name for this device was Epson S1D13521 | ||
| 2145 | and could also have been called by other names when coupled with | ||
| 2146 | a bridge adapter. | ||
| 2133 | 2147 | ||
| 2134 | source "drivers/video/omap/Kconfig" | 2148 | source "drivers/video/omap/Kconfig" |
| 2135 | 2149 | ||
diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 2a998ca6181d..bb265eca7d57 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile | |||
| @@ -106,6 +106,7 @@ obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o | |||
| 106 | obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o | 106 | obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o |
| 107 | obj-$(CONFIG_FB_MAXINE) += maxinefb.o | 107 | obj-$(CONFIG_FB_MAXINE) += maxinefb.o |
| 108 | obj-$(CONFIG_FB_METRONOME) += metronomefb.o | 108 | obj-$(CONFIG_FB_METRONOME) += metronomefb.o |
| 109 | obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o | ||
| 109 | obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o | 110 | obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o |
| 110 | obj-$(CONFIG_FB_SH7760) += sh7760fb.o | 111 | obj-$(CONFIG_FB_SH7760) += sh7760fb.o |
| 111 | obj-$(CONFIG_FB_IMX) += imxfb.o | 112 | obj-$(CONFIG_FB_IMX) += imxfb.o |
| @@ -132,7 +133,7 @@ obj-$(CONFIG_FB_VGA16) += vga16fb.o | |||
| 132 | obj-$(CONFIG_FB_OF) += offb.o | 133 | obj-$(CONFIG_FB_OF) += offb.o |
| 133 | obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o | 134 | obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o |
| 134 | obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o | 135 | obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o |
| 135 | obj-$(CONFIG_FB_MX3) += mx3fb.o | 136 | obj-$(CONFIG_FB_MX3) += mx3fb.o |
| 136 | 137 | ||
| 137 | # the test framebuffer is last | 138 | # the test framebuffer is last |
| 138 | obj-$(CONFIG_FB_VIRTUAL) += vfb.o | 139 | obj-$(CONFIG_FB_VIRTUAL) += vfb.o |
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c index 61c3d3f40fd1..6995fe1e86d4 100644 --- a/drivers/video/acornfb.c +++ b/drivers/video/acornfb.c | |||
| @@ -28,9 +28,9 @@ | |||
| 28 | #include <linux/fb.h> | 28 | #include <linux/fb.h> |
| 29 | #include <linux/platform_device.h> | 29 | #include <linux/platform_device.h> |
| 30 | #include <linux/dma-mapping.h> | 30 | #include <linux/dma-mapping.h> |
| 31 | #include <linux/io.h> | ||
| 31 | 32 | ||
| 32 | #include <mach/hardware.h> | 33 | #include <mach/hardware.h> |
| 33 | #include <asm/io.h> | ||
| 34 | #include <asm/irq.h> | 34 | #include <asm/irq.h> |
| 35 | #include <asm/mach-types.h> | 35 | #include <asm/mach-types.h> |
| 36 | #include <asm/pgtable.h> | 36 | #include <asm/pgtable.h> |
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c new file mode 100644 index 000000000000..509cb92e8731 --- /dev/null +++ b/drivers/video/broadsheetfb.c | |||
| @@ -0,0 +1,568 @@ | |||
| 1 | /* | ||
| 2 | * broadsheetfb.c -- FB driver for E-Ink Broadsheet controller | ||
| 3 | * | ||
| 4 | * Copyright (C) 2008, Jaya Kumar | ||
| 5 | * | ||
| 6 | * This file is subject to the terms and conditions of the GNU General Public | ||
| 7 | * License. See the file COPYING in the main directory of this archive for | ||
| 8 | * more details. | ||
| 9 | * | ||
| 10 | * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. | ||
| 11 | * | ||
| 12 | * This driver is written to be used with the Broadsheet display controller. | ||
| 13 | * | ||
| 14 | * It is intended to be architecture independent. A board specific driver | ||
| 15 | * must be used to perform all the physical IO interactions. | ||
| 16 | * | ||
| 17 | */ | ||
| 18 | |||
| 19 | #include <linux/module.h> | ||
| 20 | #include <linux/kernel.h> | ||
| 21 | #include <linux/errno.h> | ||
| 22 | #include <linux/string.h> | ||
| 23 | #include <linux/mm.h> | ||
| 24 | #include <linux/slab.h> | ||
| 25 | #include <linux/vmalloc.h> | ||
| 26 | #include <linux/delay.h> | ||
| 27 | #include <linux/interrupt.h> | ||
| 28 | #include <linux/fb.h> | ||
| 29 | #include <linux/init.h> | ||
| 30 | #include <linux/platform_device.h> | ||
| 31 | #include <linux/list.h> | ||
| 32 | #include <linux/uaccess.h> | ||
| 33 | |||
| 34 | #include <video/broadsheetfb.h> | ||
| 35 | |||
| 36 | /* Display specific information */ | ||
| 37 | #define DPY_W 800 | ||
| 38 | #define DPY_H 600 | ||
| 39 | |||
| 40 | static struct fb_fix_screeninfo broadsheetfb_fix __devinitdata = { | ||
| 41 | .id = "broadsheetfb", | ||
| 42 | .type = FB_TYPE_PACKED_PIXELS, | ||
| 43 | .visual = FB_VISUAL_STATIC_PSEUDOCOLOR, | ||
| 44 | .xpanstep = 0, | ||
| 45 | .ypanstep = 0, | ||
| 46 | .ywrapstep = 0, | ||
| 47 | .line_length = DPY_W, | ||
| 48 | .accel = FB_ACCEL_NONE, | ||
| 49 | }; | ||
| 50 | |||
| 51 | static struct fb_var_screeninfo broadsheetfb_var __devinitdata = { | ||
| 52 | .xres = DPY_W, | ||
| 53 | .yres = DPY_H, | ||
| 54 | .xres_virtual = DPY_W, | ||
| 55 | .yres_virtual = DPY_H, | ||
| 56 | .bits_per_pixel = 8, | ||
| 57 | .grayscale = 1, | ||
| 58 | .red = { 0, 4, 0 }, | ||
| 59 | .green = { 0, 4, 0 }, | ||
| 60 | .blue = { 0, 4, 0 }, | ||
| 61 | .transp = { 0, 0, 0 }, | ||
| 62 | }; | ||
| 63 | |||
| 64 | /* main broadsheetfb functions */ | ||
| 65 | static void broadsheet_issue_data(struct broadsheetfb_par *par, u16 data) | ||
| 66 | { | ||
| 67 | par->board->set_ctl(par, BS_WR, 0); | ||
| 68 | par->board->set_hdb(par, data); | ||
| 69 | par->board->set_ctl(par, BS_WR, 1); | ||
| 70 | } | ||
| 71 | |||
| 72 | static void broadsheet_issue_cmd(struct broadsheetfb_par *par, u16 data) | ||
| 73 | { | ||
| 74 | par->board->set_ctl(par, BS_DC, 0); | ||
| 75 | broadsheet_issue_data(par, data); | ||
| 76 | } | ||
| 77 | |||
| 78 | static void broadsheet_send_command(struct broadsheetfb_par *par, u16 data) | ||
| 79 | { | ||
| 80 | par->board->wait_for_rdy(par); | ||
| 81 | |||
| 82 | par->board->set_ctl(par, BS_CS, 0); | ||
| 83 | broadsheet_issue_cmd(par, data); | ||
| 84 | par->board->set_ctl(par, BS_DC, 1); | ||
| 85 | par->board->set_ctl(par, BS_CS, 1); | ||
| 86 | } | ||
| 87 | |||
| 88 | static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd, | ||
| 89 | int argc, u16 *argv) | ||
| 90 | { | ||
| 91 | int i; | ||
| 92 | |||
| 93 | par->board->wait_for_rdy(par); | ||
| 94 | |||
| 95 | par->board->set_ctl(par, BS_CS, 0); | ||
| 96 | broadsheet_issue_cmd(par, cmd); | ||
| 97 | par->board->set_ctl(par, BS_DC, 1); | ||
| 98 | |||
| 99 | for (i = 0; i < argc; i++) | ||
| 100 | broadsheet_issue_data(par, argv[i]); | ||
| 101 | par->board->set_ctl(par, BS_CS, 1); | ||
| 102 | } | ||
| 103 | |||
| 104 | static void broadsheet_burst_write(struct broadsheetfb_par *par, int size, | ||
| 105 | u16 *data) | ||
| 106 | { | ||
| 107 | int i; | ||
| 108 | u16 tmp; | ||
| 109 | |||
| 110 | par->board->set_ctl(par, BS_CS, 0); | ||
| 111 | par->board->set_ctl(par, BS_DC, 1); | ||
| 112 | |||
| 113 | for (i = 0; i < size; i++) { | ||
| 114 | par->board->set_ctl(par, BS_WR, 0); | ||
| 115 | tmp = (data[i] & 0x0F) << 4; | ||
| 116 | tmp |= (data[i] & 0x0F00) << 4; | ||
| 117 | par->board->set_hdb(par, tmp); | ||
| 118 | par->board->set_ctl(par, BS_WR, 1); | ||
| 119 | } | ||
| 120 | |||
| 121 | par->board->set_ctl(par, BS_CS, 1); | ||
| 122 | } | ||
| 123 | |||
| 124 | static u16 broadsheet_get_data(struct broadsheetfb_par *par) | ||
| 125 | { | ||
| 126 | u16 res; | ||
| 127 | /* wait for ready to go hi. (lo is busy) */ | ||
| 128 | par->board->wait_for_rdy(par); | ||
| 129 | |||
| 130 | /* cs lo, dc lo for cmd, we lo for each data, db as usual */ | ||
| 131 | par->board->set_ctl(par, BS_DC, 1); | ||
| 132 | par->board->set_ctl(par, BS_CS, 0); | ||
| 133 | par->board->set_ctl(par, BS_WR, 0); | ||
| 134 | |||
| 135 | res = par->board->get_hdb(par); | ||
| 136 | |||
| 137 | /* strobe wr */ | ||
| 138 | par->board->set_ctl(par, BS_WR, 1); | ||
| 139 | par->board->set_ctl(par, BS_CS, 1); | ||
| 140 | |||
| 141 | return res; | ||
| 142 | } | ||
| 143 | |||
| 144 | static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg, | ||
| 145 | u16 data) | ||
| 146 | { | ||
| 147 | /* wait for ready to go hi. (lo is busy) */ | ||
| 148 | par->board->wait_for_rdy(par); | ||
| 149 | |||
| 150 | /* cs lo, dc lo for cmd, we lo for each data, db as usual */ | ||
| 151 | par->board->set_ctl(par, BS_CS, 0); | ||
| 152 | |||
| 153 | broadsheet_issue_cmd(par, BS_CMD_WR_REG); | ||
| 154 | |||
| 155 | par->board->set_ctl(par, BS_DC, 1); | ||
| 156 | |||
| 157 | broadsheet_issue_data(par, reg); | ||
| 158 | broadsheet_issue_data(par, data); | ||
| 159 | |||
| 160 | par->board->set_ctl(par, BS_CS, 1); | ||
| 161 | } | ||
| 162 | |||
| 163 | static u16 broadsheet_read_reg(struct broadsheetfb_par *par, u16 reg) | ||
| 164 | { | ||
| 165 | broadsheet_send_command(par, reg); | ||
| 166 | msleep(100); | ||
| 167 | return broadsheet_get_data(par); | ||
| 168 | } | ||
| 169 | |||
| 170 | static void __devinit broadsheet_init_display(struct broadsheetfb_par *par) | ||
| 171 | { | ||
| 172 | u16 args[5]; | ||
| 173 | |||
| 174 | args[0] = DPY_W; | ||
| 175 | args[1] = DPY_H; | ||
| 176 | args[2] = (100 | (1 << 8) | (1 << 9)); /* sdcfg */ | ||
| 177 | args[3] = 2; /* gdrv cfg */ | ||
| 178 | args[4] = (4 | (1 << 7)); /* lut index format */ | ||
| 179 | broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args); | ||
| 180 | |||
| 181 | /* did the controller really set it? */ | ||
| 182 | broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args); | ||
| 183 | |||
| 184 | args[0] = 4; /* fsync len */ | ||
| 185 | args[1] = (10 << 8) | 4; /* fend/fbegin len */ | ||
| 186 | args[2] = 10; /* line sync len */ | ||
| 187 | args[3] = (100 << 8) | 4; /* line end/begin len */ | ||
| 188 | args[4] = 6; /* pixel clock cfg */ | ||
| 189 | broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_TMG, 5, args); | ||
| 190 | |||
| 191 | /* setup waveform */ | ||
| 192 | args[0] = 0x886; | ||
| 193 | args[1] = 0; | ||
| 194 | broadsheet_send_cmdargs(par, BS_CMD_RD_WFM_INFO, 2, args); | ||
| 195 | |||
| 196 | broadsheet_send_command(par, BS_CMD_UPD_GDRV_CLR); | ||
| 197 | |||
| 198 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG); | ||
| 199 | |||
| 200 | broadsheet_write_reg(par, 0x330, 0x84); | ||
| 201 | |||
| 202 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG); | ||
| 203 | |||
| 204 | args[0] = (0x3 << 4); | ||
| 205 | broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args); | ||
| 206 | |||
| 207 | args[0] = 0x154; | ||
| 208 | broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args); | ||
| 209 | |||
| 210 | broadsheet_burst_write(par, DPY_W*DPY_H/2, | ||
| 211 | (u16 *) par->info->screen_base); | ||
| 212 | |||
| 213 | broadsheet_send_command(par, BS_CMD_LD_IMG_END); | ||
| 214 | |||
| 215 | args[0] = 0x4300; | ||
| 216 | broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args); | ||
| 217 | |||
| 218 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG); | ||
| 219 | |||
| 220 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND); | ||
| 221 | |||
| 222 | par->board->wait_for_rdy(par); | ||
| 223 | } | ||
| 224 | |||
| 225 | static void __devinit broadsheet_init(struct broadsheetfb_par *par) | ||
| 226 | { | ||
| 227 | broadsheet_send_command(par, BS_CMD_INIT_SYS_RUN); | ||
| 228 | /* the controller needs a second */ | ||
| 229 | msleep(1000); | ||
| 230 | broadsheet_init_display(par); | ||
| 231 | } | ||
| 232 | |||
| 233 | static void broadsheetfb_dpy_update_pages(struct broadsheetfb_par *par, | ||
| 234 | u16 y1, u16 y2) | ||
| 235 | { | ||
| 236 | u16 args[5]; | ||
| 237 | unsigned char *buf = (unsigned char *)par->info->screen_base; | ||
| 238 | |||
| 239 | /* y1 must be a multiple of 4 so drop the lower bits */ | ||
| 240 | y1 &= 0xFFFC; | ||
| 241 | /* y2 must be a multiple of 4 , but - 1 so up the lower bits */ | ||
| 242 | y2 |= 0x0003; | ||
| 243 | |||
| 244 | args[0] = 0x3 << 4; | ||
| 245 | args[1] = 0; | ||
| 246 | args[2] = y1; | ||
| 247 | args[3] = cpu_to_le16(par->info->var.xres); | ||
| 248 | args[4] = y2; | ||
| 249 | broadsheet_send_cmdargs(par, BS_CMD_LD_IMG_AREA, 5, args); | ||
| 250 | |||
| 251 | args[0] = 0x154; | ||
| 252 | broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args); | ||
| 253 | |||
| 254 | buf += y1 * par->info->var.xres; | ||
| 255 | broadsheet_burst_write(par, ((1 + y2 - y1) * par->info->var.xres)/2, | ||
| 256 | (u16 *) buf); | ||
| 257 | |||
| 258 | broadsheet_send_command(par, BS_CMD_LD_IMG_END); | ||
| 259 | |||
| 260 | args[0] = 0x4300; | ||
| 261 | broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args); | ||
| 262 | |||
| 263 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG); | ||
| 264 | |||
| 265 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND); | ||
| 266 | |||
| 267 | par->board->wait_for_rdy(par); | ||
| 268 | |||
| 269 | } | ||
| 270 | |||
| 271 | static void broadsheetfb_dpy_update(struct broadsheetfb_par *par) | ||
| 272 | { | ||
| 273 | u16 args[5]; | ||
| 274 | |||
| 275 | args[0] = 0x3 << 4; | ||
| 276 | broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args); | ||
| 277 | |||
| 278 | args[0] = 0x154; | ||
| 279 | broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args); | ||
| 280 | broadsheet_burst_write(par, DPY_W*DPY_H/2, | ||
| 281 | (u16 *) par->info->screen_base); | ||
| 282 | |||
| 283 | broadsheet_send_command(par, BS_CMD_LD_IMG_END); | ||
| 284 | |||
| 285 | args[0] = 0x4300; | ||
| 286 | broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args); | ||
| 287 | |||
| 288 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG); | ||
| 289 | |||
| 290 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND); | ||
| 291 | |||
| 292 | par->board->wait_for_rdy(par); | ||
| 293 | |||
| 294 | } | ||
| 295 | |||
| 296 | /* this is called back from the deferred io workqueue */ | ||
| 297 | static void broadsheetfb_dpy_deferred_io(struct fb_info *info, | ||
| 298 | struct list_head *pagelist) | ||
| 299 | { | ||
| 300 | u16 y1 = 0, h = 0; | ||
| 301 | int prev_index = -1; | ||
| 302 | struct page *cur; | ||
| 303 | struct fb_deferred_io *fbdefio = info->fbdefio; | ||
| 304 | int h_inc; | ||
| 305 | u16 yres = info->var.yres; | ||
| 306 | u16 xres = info->var.xres; | ||
| 307 | |||
| 308 | /* height increment is fixed per page */ | ||
| 309 | h_inc = DIV_ROUND_UP(PAGE_SIZE , xres); | ||
| 310 | |||
| 311 | /* walk the written page list and swizzle the data */ | ||
| 312 | list_for_each_entry(cur, &fbdefio->pagelist, lru) { | ||
| 313 | if (prev_index < 0) { | ||
| 314 | /* just starting so assign first page */ | ||
| 315 | y1 = (cur->index << PAGE_SHIFT) / xres; | ||
| 316 | h = h_inc; | ||
| 317 | } else if ((prev_index + 1) == cur->index) { | ||
| 318 | /* this page is consecutive so increase our height */ | ||
| 319 | h += h_inc; | ||
| 320 | } else { | ||
| 321 | /* page not consecutive, issue previous update first */ | ||
| 322 | broadsheetfb_dpy_update_pages(info->par, y1, y1 + h); | ||
| 323 | /* start over with our non consecutive page */ | ||
| 324 | y1 = (cur->index << PAGE_SHIFT) / xres; | ||
| 325 | h = h_inc; | ||
| 326 | } | ||
| 327 | prev_index = cur->index; | ||
| 328 | } | ||
| 329 | |||
| 330 | /* if we still have any pages to update we do so now */ | ||
| 331 | if (h >= yres) { | ||
| 332 | /* its a full screen update, just do it */ | ||
| 333 | broadsheetfb_dpy_update(info->par); | ||
| 334 | } else { | ||
| 335 | broadsheetfb_dpy_update_pages(info->par, y1, | ||
| 336 | min((u16) (y1 + h), yres)); | ||
| 337 | } | ||
| 338 | } | ||
| 339 | |||
| 340 | static void broadsheetfb_fillrect(struct fb_info *info, | ||
| 341 | const struct fb_fillrect *rect) | ||
| 342 | { | ||
| 343 | struct broadsheetfb_par *par = info->par; | ||
| 344 | |||
| 345 | sys_fillrect(info, rect); | ||
| 346 | |||
| 347 | broadsheetfb_dpy_update(par); | ||
| 348 | } | ||
| 349 | |||
| 350 | static void broadsheetfb_copyarea(struct fb_info *info, | ||
| 351 | const struct fb_copyarea *area) | ||
| 352 | { | ||
| 353 | struct broadsheetfb_par *par = info->par; | ||
| 354 | |||
| 355 | sys_copyarea(info, area); | ||
| 356 | |||
| 357 | broadsheetfb_dpy_update(par); | ||
| 358 | } | ||
| 359 | |||
| 360 | static void broadsheetfb_imageblit(struct fb_info *info, | ||
| 361 | const struct fb_image *image) | ||
| 362 | { | ||
| 363 | struct broadsheetfb_par *par = info->par; | ||
| 364 | |||
| 365 | sys_imageblit(info, image); | ||
| 366 | |||
| 367 | broadsheetfb_dpy_update(par); | ||
| 368 | } | ||
| 369 | |||
| 370 | /* | ||
| 371 | * this is the slow path from userspace. they can seek and write to | ||
| 372 | * the fb. it's inefficient to do anything less than a full screen draw | ||
| 373 | */ | ||
| 374 | static ssize_t broadsheetfb_write(struct fb_info *info, const char __user *buf, | ||
| 375 | size_t count, loff_t *ppos) | ||
| 376 | { | ||
| 377 | struct broadsheetfb_par *par = info->par; | ||
| 378 | unsigned long p = *ppos; | ||
| 379 | void *dst; | ||
| 380 | int err = 0; | ||
| 381 | unsigned long total_size; | ||
| 382 | |||
| 383 | if (info->state != FBINFO_STATE_RUNNING) | ||
| 384 | return -EPERM; | ||
| 385 | |||
| 386 | total_size = info->fix.smem_len; | ||
| 387 | |||
| 388 | if (p > total_size) | ||
| 389 | return -EFBIG; | ||
| 390 | |||
| 391 | if (count > total_size) { | ||
| 392 | err = -EFBIG; | ||
| 393 | count = total_size; | ||
| 394 | } | ||
| 395 | |||
| 396 | if (count + p > total_size) { | ||
| 397 | if (!err) | ||
| 398 | err = -ENOSPC; | ||
| 399 | |||
| 400 | count = total_size - p; | ||
| 401 | } | ||
| 402 | |||
| 403 | dst = (void *)(info->screen_base + p); | ||
| 404 | |||
| 405 | if (copy_from_user(dst, buf, count)) | ||
| 406 | err = -EFAULT; | ||
| 407 | |||
| 408 | if (!err) | ||
| 409 | *ppos += count; | ||
| 410 | |||
| 411 | broadsheetfb_dpy_update(par); | ||
| 412 | |||
| 413 | return (err) ? err : count; | ||
| 414 | } | ||
| 415 | |||
| 416 | static struct fb_ops broadsheetfb_ops = { | ||
| 417 | .owner = THIS_MODULE, | ||
| 418 | .fb_read = fb_sys_read, | ||
| 419 | .fb_write = broadsheetfb_write, | ||
| 420 | .fb_fillrect = broadsheetfb_fillrect, | ||
| 421 | .fb_copyarea = broadsheetfb_copyarea, | ||
| 422 | .fb_imageblit = broadsheetfb_imageblit, | ||
| 423 | }; | ||
| 424 | |||
| 425 | static struct fb_deferred_io broadsheetfb_defio = { | ||
| 426 | .delay = HZ/4, | ||
| 427 | .deferred_io = broadsheetfb_dpy_deferred_io, | ||
| 428 | }; | ||
| 429 | |||
| 430 | static int __devinit broadsheetfb_probe(struct platform_device *dev) | ||
| 431 | { | ||
| 432 | struct fb_info *info; | ||
| 433 | struct broadsheet_board *board; | ||
| 434 | int retval = -ENOMEM; | ||
| 435 | int videomemorysize; | ||
| 436 | unsigned char *videomemory; | ||
| 437 | struct broadsheetfb_par *par; | ||
| 438 | int i; | ||
| 439 | |||
| 440 | /* pick up board specific routines */ | ||
| 441 | board = dev->dev.platform_data; | ||
| 442 | if (!board) | ||
| 443 | return -EINVAL; | ||
| 444 | |||
| 445 | /* try to count device specific driver, if can't, platform recalls */ | ||
| 446 | if (!try_module_get(board->owner)) | ||
| 447 | return -ENODEV; | ||
| 448 | |||
| 449 | info = framebuffer_alloc(sizeof(struct broadsheetfb_par), &dev->dev); | ||
| 450 | if (!info) | ||
| 451 | goto err; | ||
| 452 | |||
| 453 | videomemorysize = (DPY_W*DPY_H); | ||
| 454 | videomemory = vmalloc(videomemorysize); | ||
| 455 | if (!videomemory) | ||
| 456 | goto err_fb_rel; | ||
| 457 | |||
| 458 | memset(videomemory, 0, videomemorysize); | ||
| 459 | |||
| 460 | info->screen_base = (char *)videomemory; | ||
| 461 | info->fbops = &broadsheetfb_ops; | ||
| 462 | |||
| 463 | info->var = broadsheetfb_var; | ||
| 464 | info->fix = broadsheetfb_fix; | ||
| 465 | info->fix.smem_len = videomemorysize; | ||
| 466 | par = info->par; | ||
| 467 | par->info = info; | ||
| 468 | par->board = board; | ||
| 469 | par->write_reg = broadsheet_write_reg; | ||
| 470 | par->read_reg = broadsheet_read_reg; | ||
| 471 | init_waitqueue_head(&par->waitq); | ||
| 472 | |||
| 473 | info->flags = FBINFO_FLAG_DEFAULT; | ||
| 474 | |||
| 475 | info->fbdefio = &broadsheetfb_defio; | ||
| 476 | fb_deferred_io_init(info); | ||
| 477 | |||
| 478 | retval = fb_alloc_cmap(&info->cmap, 16, 0); | ||
| 479 | if (retval < 0) { | ||
| 480 | dev_err(&dev->dev, "Failed to allocate colormap\n"); | ||
| 481 | goto err_vfree; | ||
| 482 | } | ||
| 483 | |||
| 484 | /* set cmap */ | ||
| 485 | for (i = 0; i < 16; i++) | ||
| 486 | info->cmap.red[i] = (((2*i)+1)*(0xFFFF))/32; | ||
| 487 | memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*16); | ||
| 488 | memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*16); | ||
| 489 | |||
| 490 | retval = par->board->setup_irq(info); | ||
| 491 | if (retval < 0) | ||
| 492 | goto err_cmap; | ||
| 493 | |||
| 494 | /* this inits the dpy */ | ||
| 495 | retval = board->init(par); | ||
| 496 | if (retval < 0) | ||
| 497 | goto err_free_irq; | ||
| 498 | |||
| 499 | broadsheet_init(par); | ||
| 500 | |||
| 501 | retval = register_framebuffer(info); | ||
| 502 | if (retval < 0) | ||
| 503 | goto err_free_irq; | ||
| 504 | platform_set_drvdata(dev, info); | ||
| 505 | |||
| 506 | printk(KERN_INFO | ||
| 507 | "fb%d: Broadsheet frame buffer, using %dK of video memory\n", | ||
| 508 | info->node, videomemorysize >> 10); | ||
| 509 | |||
| 510 | |||
| 511 | return 0; | ||
| 512 | |||
| 513 | err_free_irq: | ||
| 514 | board->cleanup(par); | ||
| 515 | err_cmap: | ||
| 516 | fb_dealloc_cmap(&info->cmap); | ||
| 517 | err_vfree: | ||
| 518 | vfree(videomemory); | ||
| 519 | err_fb_rel: | ||
| 520 | framebuffer_release(info); | ||
| 521 | err: | ||
| 522 | module_put(board->owner); | ||
| 523 | return retval; | ||
| 524 | |||
| 525 | } | ||
| 526 | |||
| 527 | static int __devexit broadsheetfb_remove(struct platform_device *dev) | ||
| 528 | { | ||
| 529 | struct fb_info *info = platform_get_drvdata(dev); | ||
| 530 | |||
| 531 | if (info) { | ||
| 532 | struct broadsheetfb_par *par = info->par; | ||
| 533 | unregister_framebuffer(info); | ||
| 534 | fb_deferred_io_cleanup(info); | ||
| 535 | par->board->cleanup(par); | ||
| 536 | fb_dealloc_cmap(&info->cmap); | ||
| 537 | vfree((void *)info->screen_base); | ||
| 538 | module_put(par->board->owner); | ||
| 539 | framebuffer_release(info); | ||
| 540 | } | ||
| 541 | return 0; | ||
| 542 | } | ||
| 543 | |||
| 544 | static struct platform_driver broadsheetfb_driver = { | ||
| 545 | .probe = broadsheetfb_probe, | ||
| 546 | .remove = broadsheetfb_remove, | ||
| 547 | .driver = { | ||
| 548 | .owner = THIS_MODULE, | ||
| 549 | .name = "broadsheetfb", | ||
| 550 | }, | ||
| 551 | }; | ||
| 552 | |||
| 553 | static int __init broadsheetfb_init(void) | ||
| 554 | { | ||
| 555 | return platform_driver_register(&broadsheetfb_driver); | ||
| 556 | } | ||
| 557 | |||
| 558 | static void __exit broadsheetfb_exit(void) | ||
| 559 | { | ||
| 560 | platform_driver_unregister(&broadsheetfb_driver); | ||
| 561 | } | ||
| 562 | |||
| 563 | module_init(broadsheetfb_init); | ||
| 564 | module_exit(broadsheetfb_exit); | ||
| 565 | |||
| 566 | MODULE_DESCRIPTION("fbdev driver for Broadsheet controller"); | ||
| 567 | MODULE_AUTHOR("Jaya Kumar"); | ||
| 568 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c index 7a9e42e3a9a9..83c5cefc266c 100644 --- a/drivers/video/cyber2000fb.c +++ b/drivers/video/cyber2000fb.c | |||
| @@ -46,8 +46,8 @@ | |||
| 46 | #include <linux/fb.h> | 46 | #include <linux/fb.h> |
| 47 | #include <linux/pci.h> | 47 | #include <linux/pci.h> |
| 48 | #include <linux/init.h> | 48 | #include <linux/init.h> |
| 49 | #include <linux/io.h> | ||
| 49 | 50 | ||
| 50 | #include <asm/io.h> | ||
| 51 | #include <asm/pgtable.h> | 51 | #include <asm/pgtable.h> |
| 52 | #include <asm/system.h> | 52 | #include <asm/system.h> |
| 53 | 53 | ||
| @@ -1425,7 +1425,7 @@ static void cyberpro_common_resume(struct cfb_info *cfb) | |||
| 1425 | 1425 | ||
| 1426 | #ifdef CONFIG_ARCH_SHARK | 1426 | #ifdef CONFIG_ARCH_SHARK |
| 1427 | 1427 | ||
| 1428 | #include <mach/hardware.h> | 1428 | #include <mach/framebuffer.h> |
| 1429 | 1429 | ||
| 1430 | static int __devinit cyberpro_vl_probe(void) | 1430 | static int __devinit cyberpro_vl_probe(void) |
| 1431 | { | 1431 | { |
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index d58c68cd456e..15a0ee6d8e23 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c | |||
| @@ -14,7 +14,6 @@ | |||
| 14 | * linux-arm-kernel@lists.arm.linux.org.uk | 14 | * linux-arm-kernel@lists.arm.linux.org.uk |
| 15 | */ | 15 | */ |
| 16 | 16 | ||
| 17 | |||
| 18 | #include <linux/module.h> | 17 | #include <linux/module.h> |
| 19 | #include <linux/kernel.h> | 18 | #include <linux/kernel.h> |
| 20 | #include <linux/errno.h> | 19 | #include <linux/errno.h> |
| @@ -27,9 +26,11 @@ | |||
| 27 | #include <linux/init.h> | 26 | #include <linux/init.h> |
| 28 | #include <linux/ioport.h> | 27 | #include <linux/ioport.h> |
| 29 | #include <linux/cpufreq.h> | 28 | #include <linux/cpufreq.h> |
| 29 | #include <linux/clk.h> | ||
| 30 | #include <linux/platform_device.h> | 30 | #include <linux/platform_device.h> |
| 31 | #include <linux/dma-mapping.h> | 31 | #include <linux/dma-mapping.h> |
| 32 | #include <linux/io.h> | 32 | #include <linux/io.h> |
| 33 | #include <linux/math64.h> | ||
| 33 | 34 | ||
| 34 | #include <mach/imxfb.h> | 35 | #include <mach/imxfb.h> |
| 35 | 36 | ||
| @@ -44,7 +45,12 @@ | |||
| 44 | 45 | ||
| 45 | #define LCDC_SIZE 0x04 | 46 | #define LCDC_SIZE 0x04 |
| 46 | #define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20) | 47 | #define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20) |
| 48 | |||
| 49 | #ifdef CONFIG_ARCH_MX1 | ||
| 47 | #define SIZE_YMAX(y) ((y) & 0x1ff) | 50 | #define SIZE_YMAX(y) ((y) & 0x1ff) |
| 51 | #else | ||
| 52 | #define SIZE_YMAX(y) ((y) & 0x3ff) | ||
| 53 | #endif | ||
| 48 | 54 | ||
| 49 | #define LCDC_VPW 0x08 | 55 | #define LCDC_VPW 0x08 |
| 50 | #define VPW_VPW(x) ((x) & 0x3ff) | 56 | #define VPW_VPW(x) ((x) & 0x3ff) |
| @@ -54,7 +60,12 @@ | |||
| 54 | #define CPOS_CC0 (1<<30) | 60 | #define CPOS_CC0 (1<<30) |
| 55 | #define CPOS_OP (1<<28) | 61 | #define CPOS_OP (1<<28) |
| 56 | #define CPOS_CXP(x) (((x) & 3ff) << 16) | 62 | #define CPOS_CXP(x) (((x) & 3ff) << 16) |
| 63 | |||
| 64 | #ifdef CONFIG_ARCH_MX1 | ||
| 57 | #define CPOS_CYP(y) ((y) & 0x1ff) | 65 | #define CPOS_CYP(y) ((y) & 0x1ff) |
| 66 | #else | ||
| 67 | #define CPOS_CYP(y) ((y) & 0x3ff) | ||
| 68 | #endif | ||
| 58 | 69 | ||
| 59 | #define LCDC_LCWHB 0x10 | 70 | #define LCDC_LCWHB 0x10 |
| 60 | #define LCWHB_BK_EN (1<<31) | 71 | #define LCWHB_BK_EN (1<<31) |
| @@ -63,9 +74,16 @@ | |||
| 63 | #define LCWHB_BD(x) ((x) & 0xff) | 74 | #define LCWHB_BD(x) ((x) & 0xff) |
| 64 | 75 | ||
| 65 | #define LCDC_LCHCC 0x14 | 76 | #define LCDC_LCHCC 0x14 |
| 77 | |||
| 78 | #ifdef CONFIG_ARCH_MX1 | ||
| 66 | #define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11) | 79 | #define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11) |
| 67 | #define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5) | 80 | #define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5) |
| 68 | #define LCHCC_CUR_COL_B(b) ((b) & 0x1f) | 81 | #define LCHCC_CUR_COL_B(b) ((b) & 0x1f) |
| 82 | #else | ||
| 83 | #define LCHCC_CUR_COL_R(r) (((r) & 0x3f) << 12) | ||
| 84 | #define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 6) | ||
| 85 | #define LCHCC_CUR_COL_B(b) ((b) & 0x3f) | ||
| 86 | #endif | ||
| 69 | 87 | ||
| 70 | #define LCDC_PCR 0x18 | 88 | #define LCDC_PCR 0x18 |
| 71 | 89 | ||
| @@ -92,7 +110,13 @@ | |||
| 92 | /* bit fields in imxfb.h */ | 110 | /* bit fields in imxfb.h */ |
| 93 | 111 | ||
| 94 | #define LCDC_RMCR 0x34 | 112 | #define LCDC_RMCR 0x34 |
| 113 | |||
| 114 | #ifdef CONFIG_ARCH_MX1 | ||
| 95 | #define RMCR_LCDC_EN (1<<1) | 115 | #define RMCR_LCDC_EN (1<<1) |
| 116 | #else | ||
| 117 | #define RMCR_LCDC_EN 0 | ||
| 118 | #endif | ||
| 119 | |||
| 96 | #define RMCR_SELF_REF (1<<0) | 120 | #define RMCR_SELF_REF (1<<0) |
| 97 | 121 | ||
| 98 | #define LCDC_LCDICR 0x38 | 122 | #define LCDC_LCDICR 0x38 |
| @@ -119,6 +143,7 @@ struct imxfb_rgb { | |||
| 119 | struct imxfb_info { | 143 | struct imxfb_info { |
| 120 | struct platform_device *pdev; | 144 | struct platform_device *pdev; |
| 121 | void __iomem *regs; | 145 | void __iomem *regs; |
| 146 | struct clk *clk; | ||
| 122 | 147 | ||
| 123 | u_int max_bpp; | 148 | u_int max_bpp; |
| 124 | u_int max_xres; | 149 | u_int max_xres; |
| @@ -159,6 +184,17 @@ struct imxfb_info { | |||
| 159 | #define MIN_XRES 64 | 184 | #define MIN_XRES 64 |
| 160 | #define MIN_YRES 64 | 185 | #define MIN_YRES 64 |
| 161 | 186 | ||
| 187 | /* Actually this really is 18bit support, the lowest 2 bits of each colour | ||
| 188 | * are unused in hardware. We claim to have 24bit support to make software | ||
| 189 | * like X work, which does not support 18bit. | ||
| 190 | */ | ||
| 191 | static struct imxfb_rgb def_rgb_18 = { | ||
| 192 | .red = {.offset = 16, .length = 8,}, | ||
| 193 | .green = {.offset = 8, .length = 8,}, | ||
| 194 | .blue = {.offset = 0, .length = 8,}, | ||
| 195 | .transp = {.offset = 0, .length = 0,}, | ||
| 196 | }; | ||
| 197 | |||
| 162 | static struct imxfb_rgb def_rgb_16_tft = { | 198 | static struct imxfb_rgb def_rgb_16_tft = { |
| 163 | .red = {.offset = 11, .length = 5,}, | 199 | .red = {.offset = 11, .length = 5,}, |
| 164 | .green = {.offset = 5, .length = 6,}, | 200 | .green = {.offset = 5, .length = 6,}, |
| @@ -286,9 +322,12 @@ static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) | |||
| 286 | 322 | ||
| 287 | pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel); | 323 | pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel); |
| 288 | switch (var->bits_per_pixel) { | 324 | switch (var->bits_per_pixel) { |
| 325 | case 32: | ||
| 326 | rgb = &def_rgb_18; | ||
| 327 | break; | ||
| 289 | case 16: | 328 | case 16: |
| 290 | default: | 329 | default: |
| 291 | if (readl(fbi->regs + LCDC_PCR) & PCR_TFT) | 330 | if (fbi->pcr & PCR_TFT) |
| 292 | rgb = &def_rgb_16_tft; | 331 | rgb = &def_rgb_16_tft; |
| 293 | else | 332 | else |
| 294 | rgb = &def_rgb_16_stn; | 333 | rgb = &def_rgb_16_stn; |
| @@ -327,9 +366,7 @@ static int imxfb_set_par(struct fb_info *info) | |||
| 327 | struct imxfb_info *fbi = info->par; | 366 | struct imxfb_info *fbi = info->par; |
| 328 | struct fb_var_screeninfo *var = &info->var; | 367 | struct fb_var_screeninfo *var = &info->var; |
| 329 | 368 | ||
| 330 | pr_debug("set_par\n"); | 369 | if (var->bits_per_pixel == 16 || var->bits_per_pixel == 32) |
| 331 | |||
| 332 | if (var->bits_per_pixel == 16) | ||
| 333 | info->fix.visual = FB_VISUAL_TRUECOLOR; | 370 | info->fix.visual = FB_VISUAL_TRUECOLOR; |
| 334 | else if (!fbi->cmap_static) | 371 | else if (!fbi->cmap_static) |
| 335 | info->fix.visual = FB_VISUAL_PSEUDOCOLOR; | 372 | info->fix.visual = FB_VISUAL_PSEUDOCOLOR; |
| @@ -354,10 +391,6 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) | |||
| 354 | { | 391 | { |
| 355 | pr_debug("Enabling LCD controller\n"); | 392 | pr_debug("Enabling LCD controller\n"); |
| 356 | 393 | ||
| 357 | /* initialize LCDC */ | ||
| 358 | writel(readl(fbi->regs + LCDC_RMCR) & ~RMCR_LCDC_EN, | ||
| 359 | fbi->regs + LCDC_RMCR); /* just to be safe... */ | ||
| 360 | |||
| 361 | writel(fbi->screen_dma, fbi->regs + LCDC_SSA); | 394 | writel(fbi->screen_dma, fbi->regs + LCDC_SSA); |
| 362 | 395 | ||
| 363 | /* physical screen start address */ | 396 | /* physical screen start address */ |
| @@ -373,6 +406,8 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) | |||
| 373 | 406 | ||
| 374 | writel(RMCR_LCDC_EN, fbi->regs + LCDC_RMCR); | 407 | writel(RMCR_LCDC_EN, fbi->regs + LCDC_RMCR); |
| 375 | 408 | ||
| 409 | clk_enable(fbi->clk); | ||
| 410 | |||
| 376 | if (fbi->backlight_power) | 411 | if (fbi->backlight_power) |
| 377 | fbi->backlight_power(1); | 412 | fbi->backlight_power(1); |
| 378 | if (fbi->lcd_power) | 413 | if (fbi->lcd_power) |
| @@ -388,6 +423,8 @@ static void imxfb_disable_controller(struct imxfb_info *fbi) | |||
| 388 | if (fbi->lcd_power) | 423 | if (fbi->lcd_power) |
| 389 | fbi->lcd_power(0); | 424 | fbi->lcd_power(0); |
| 390 | 425 | ||
| 426 | clk_disable(fbi->clk); | ||
| 427 | |||
| 391 | writel(0, fbi->regs + LCDC_RMCR); | 428 | writel(0, fbi->regs + LCDC_RMCR); |
| 392 | } | 429 | } |
| 393 | 430 | ||
| @@ -431,6 +468,9 @@ static struct fb_ops imxfb_ops = { | |||
| 431 | static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info) | 468 | static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info) |
| 432 | { | 469 | { |
| 433 | struct imxfb_info *fbi = info->par; | 470 | struct imxfb_info *fbi = info->par; |
| 471 | unsigned int pcr, lcd_clk; | ||
| 472 | unsigned long long tmp; | ||
| 473 | |||
| 434 | pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n", | 474 | pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n", |
| 435 | var->xres, var->hsync_len, | 475 | var->xres, var->hsync_len, |
| 436 | var->left_margin, var->right_margin); | 476 | var->left_margin, var->right_margin); |
| @@ -465,9 +505,9 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf | |||
| 465 | info->fix.id, var->lower_margin); | 505 | info->fix.id, var->lower_margin); |
| 466 | #endif | 506 | #endif |
| 467 | 507 | ||
| 468 | writel(HCR_H_WIDTH(var->hsync_len) | | 508 | writel(HCR_H_WIDTH(var->hsync_len - 1) | |
| 469 | HCR_H_WAIT_1(var->right_margin) | | 509 | HCR_H_WAIT_1(var->right_margin - 1) | |
| 470 | HCR_H_WAIT_2(var->left_margin), | 510 | HCR_H_WAIT_2(var->left_margin - 3), |
| 471 | fbi->regs + LCDC_HCR); | 511 | fbi->regs + LCDC_HCR); |
| 472 | 512 | ||
| 473 | writel(VCR_V_WIDTH(var->vsync_len) | | 513 | writel(VCR_V_WIDTH(var->vsync_len) | |
| @@ -477,7 +517,23 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf | |||
| 477 | 517 | ||
| 478 | writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres), | 518 | writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres), |
| 479 | fbi->regs + LCDC_SIZE); | 519 | fbi->regs + LCDC_SIZE); |
| 480 | writel(fbi->pcr, fbi->regs + LCDC_PCR); | 520 | |
| 521 | lcd_clk = clk_get_rate(fbi->clk); | ||
| 522 | tmp = var->pixclock * (unsigned long long)lcd_clk; | ||
| 523 | do_div(tmp, 1000000); | ||
| 524 | if (do_div(tmp, 1000000) > 500000) | ||
| 525 | tmp++; | ||
| 526 | pcr = (unsigned int)tmp; | ||
| 527 | if (--pcr > 0x3F) { | ||
| 528 | pcr = 0x3F; | ||
| 529 | printk(KERN_WARNING "Must limit pixel clock to %uHz\n", | ||
| 530 | lcd_clk / pcr); | ||
| 531 | } | ||
| 532 | |||
| 533 | /* add sync polarities */ | ||
| 534 | pcr |= fbi->pcr & ~0x3F; | ||
| 535 | |||
| 536 | writel(pcr, fbi->regs + LCDC_PCR); | ||
| 481 | writel(fbi->pwmr, fbi->regs + LCDC_PWMR); | 537 | writel(fbi->pwmr, fbi->regs + LCDC_PWMR); |
| 482 | writel(fbi->lscr1, fbi->regs + LCDC_LSCR1); | 538 | writel(fbi->lscr1, fbi->regs + LCDC_LSCR1); |
| 483 | writel(fbi->dmacr, fbi->regs + LCDC_DMACR); | 539 | writel(fbi->dmacr, fbi->regs + LCDC_DMACR); |
| @@ -619,6 +675,13 @@ static int __init imxfb_probe(struct platform_device *pdev) | |||
| 619 | goto failed_req; | 675 | goto failed_req; |
| 620 | } | 676 | } |
| 621 | 677 | ||
| 678 | fbi->clk = clk_get(&pdev->dev, NULL); | ||
| 679 | if (IS_ERR(fbi->clk)) { | ||
| 680 | ret = PTR_ERR(fbi->clk);; | ||
| 681 | dev_err(&pdev->dev, "unable to get clock: %d\n", ret); | ||
| 682 | goto failed_getclock; | ||
| 683 | } | ||
| 684 | |||
| 622 | fbi->regs = ioremap(res->start, resource_size(res)); | 685 | fbi->regs = ioremap(res->start, resource_size(res)); |
| 623 | if (fbi->regs == NULL) { | 686 | if (fbi->regs == NULL) { |
| 624 | printk(KERN_ERR"Cannot map frame buffer registers\n"); | 687 | printk(KERN_ERR"Cannot map frame buffer registers\n"); |
| @@ -650,6 +713,12 @@ static int __init imxfb_probe(struct platform_device *pdev) | |||
| 650 | info->fix.smem_start = fbi->screen_dma; | 713 | info->fix.smem_start = fbi->screen_dma; |
| 651 | } | 714 | } |
| 652 | 715 | ||
| 716 | if (pdata->init) { | ||
| 717 | ret = pdata->init(fbi->pdev); | ||
| 718 | if (ret) | ||
| 719 | goto failed_platform_init; | ||
| 720 | } | ||
| 721 | |||
| 653 | /* | 722 | /* |
| 654 | * This makes sure that our colour bitfield | 723 | * This makes sure that our colour bitfield |
| 655 | * descriptors are correctly initialised. | 724 | * descriptors are correctly initialised. |
| @@ -674,10 +743,15 @@ static int __init imxfb_probe(struct platform_device *pdev) | |||
| 674 | failed_register: | 743 | failed_register: |
| 675 | fb_dealloc_cmap(&info->cmap); | 744 | fb_dealloc_cmap(&info->cmap); |
| 676 | failed_cmap: | 745 | failed_cmap: |
| 746 | if (pdata->exit) | ||
| 747 | pdata->exit(fbi->pdev); | ||
| 748 | failed_platform_init: | ||
| 677 | if (!pdata->fixed_screen_cpu) | 749 | if (!pdata->fixed_screen_cpu) |
| 678 | dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu, | 750 | dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu, |
| 679 | fbi->map_dma); | 751 | fbi->map_dma); |
| 680 | failed_map: | 752 | failed_map: |
| 753 | clk_put(fbi->clk); | ||
| 754 | failed_getclock: | ||
| 681 | iounmap(fbi->regs); | 755 | iounmap(fbi->regs); |
| 682 | failed_ioremap: | 756 | failed_ioremap: |
| 683 | release_mem_region(res->start, res->end - res->start); | 757 | release_mem_region(res->start, res->end - res->start); |
| @@ -691,6 +765,7 @@ failed_init: | |||
| 691 | 765 | ||
| 692 | static int __devexit imxfb_remove(struct platform_device *pdev) | 766 | static int __devexit imxfb_remove(struct platform_device *pdev) |
| 693 | { | 767 | { |
| 768 | struct imx_fb_platform_data *pdata; | ||
| 694 | struct fb_info *info = platform_get_drvdata(pdev); | 769 | struct fb_info *info = platform_get_drvdata(pdev); |
| 695 | struct imxfb_info *fbi = info->par; | 770 | struct imxfb_info *fbi = info->par; |
| 696 | struct resource *res; | 771 | struct resource *res; |
| @@ -701,12 +776,19 @@ static int __devexit imxfb_remove(struct platform_device *pdev) | |||
| 701 | 776 | ||
| 702 | unregister_framebuffer(info); | 777 | unregister_framebuffer(info); |
| 703 | 778 | ||
| 779 | pdata = pdev->dev.platform_data; | ||
| 780 | if (pdata->exit) | ||
| 781 | pdata->exit(fbi->pdev); | ||
| 782 | |||
| 704 | fb_dealloc_cmap(&info->cmap); | 783 | fb_dealloc_cmap(&info->cmap); |
| 705 | kfree(info->pseudo_palette); | 784 | kfree(info->pseudo_palette); |
| 706 | framebuffer_release(info); | 785 | framebuffer_release(info); |
| 707 | 786 | ||
| 708 | iounmap(fbi->regs); | 787 | iounmap(fbi->regs); |
| 709 | release_mem_region(res->start, res->end - res->start + 1); | 788 | release_mem_region(res->start, res->end - res->start + 1); |
| 789 | clk_disable(fbi->clk); | ||
| 790 | clk_put(fbi->clk); | ||
| 791 | |||
| 710 | platform_set_drvdata(pdev, NULL); | 792 | platform_set_drvdata(pdev, NULL); |
| 711 | 793 | ||
| 712 | return 0; | 794 | return 0; |
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 8a75d05f4334..fa1a512ce030 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c | |||
| @@ -34,240 +34,240 @@ | |||
| 34 | #include <asm/io.h> | 34 | #include <asm/io.h> |
| 35 | #include <asm/uaccess.h> | 35 | #include <asm/uaccess.h> |
| 36 | 36 | ||
| 37 | #define MX3FB_NAME "mx3_sdc_fb" | 37 | #define MX3FB_NAME "mx3_sdc_fb" |
| 38 | 38 | ||
| 39 | #define MX3FB_REG_OFFSET 0xB4 | 39 | #define MX3FB_REG_OFFSET 0xB4 |
| 40 | 40 | ||
| 41 | /* SDC Registers */ | 41 | /* SDC Registers */ |
| 42 | #define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET) | 42 | #define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET) |
| 43 | #define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET) | 43 | #define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET) |
| 44 | #define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET) | 44 | #define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET) |
| 45 | #define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET) | 45 | #define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET) |
| 46 | #define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET) | 46 | #define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET) |
| 47 | #define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET) | 47 | #define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET) |
| 48 | #define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET) | 48 | #define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET) |
| 49 | #define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET) | 49 | #define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET) |
| 50 | #define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET) | 50 | #define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET) |
| 51 | #define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET) | 51 | #define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET) |
| 52 | #define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET) | 52 | #define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET) |
| 53 | 53 | ||
| 54 | /* Register bits */ | 54 | /* Register bits */ |
| 55 | #define SDC_COM_TFT_COLOR 0x00000001UL | 55 | #define SDC_COM_TFT_COLOR 0x00000001UL |
| 56 | #define SDC_COM_FG_EN 0x00000010UL | 56 | #define SDC_COM_FG_EN 0x00000010UL |
| 57 | #define SDC_COM_GWSEL 0x00000020UL | 57 | #define SDC_COM_GWSEL 0x00000020UL |
| 58 | #define SDC_COM_GLB_A 0x00000040UL | 58 | #define SDC_COM_GLB_A 0x00000040UL |
| 59 | #define SDC_COM_KEY_COLOR_G 0x00000080UL | 59 | #define SDC_COM_KEY_COLOR_G 0x00000080UL |
| 60 | #define SDC_COM_BG_EN 0x00000200UL | 60 | #define SDC_COM_BG_EN 0x00000200UL |
| 61 | #define SDC_COM_SHARP 0x00001000UL | 61 | #define SDC_COM_SHARP 0x00001000UL |
| 62 | 62 | ||
| 63 | #define SDC_V_SYNC_WIDTH_L 0x00000001UL | 63 | #define SDC_V_SYNC_WIDTH_L 0x00000001UL |
| 64 | 64 | ||
| 65 | /* Display Interface registers */ | 65 | /* Display Interface registers */ |
| 66 | #define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET) | 66 | #define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET) |
| 67 | #define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET) | 67 | #define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET) |
| 68 | #define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET) | 68 | #define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET) |
| 69 | #define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET) | 69 | #define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET) |
| 70 | #define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET) | 70 | #define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET) |
| 71 | #define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET) | 71 | #define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET) |
| 72 | #define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET) | 72 | #define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET) |
| 73 | #define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET) | 73 | #define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET) |
| 74 | #define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET) | 74 | #define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET) |
| 75 | #define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET) | 75 | #define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET) |
| 76 | #define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET) | 76 | #define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET) |
| 77 | #define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET) | 77 | #define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET) |
| 78 | #define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET) | 78 | #define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET) |
| 79 | #define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET) | 79 | #define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET) |
| 80 | #define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET) | 80 | #define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET) |
| 81 | #define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET) | 81 | #define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET) |
| 82 | #define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET) | 82 | #define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET) |
| 83 | #define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET) | 83 | #define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET) |
| 84 | #define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET) | 84 | #define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET) |
| 85 | #define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET) | 85 | #define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET) |
| 86 | #define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET) | 86 | #define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET) |
| 87 | #define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET) | 87 | #define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET) |
| 88 | #define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET) | 88 | #define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET) |
| 89 | #define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET) | 89 | #define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET) |
| 90 | #define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET) | 90 | #define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET) |
| 91 | #define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET) | 91 | #define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET) |
| 92 | #define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET) | 92 | #define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET) |
| 93 | #define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET) | 93 | #define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET) |
| 94 | #define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET) | 94 | #define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET) |
| 95 | #define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET) | 95 | #define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET) |
| 96 | #define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET) | 96 | #define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET) |
| 97 | #define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET) | 97 | #define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET) |
| 98 | #define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET) | 98 | #define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET) |
| 99 | #define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET) | 99 | #define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET) |
| 100 | #define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET) | 100 | #define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET) |
| 101 | #define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET) | 101 | #define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET) |
| 102 | #define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET) | 102 | #define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET) |
| 103 | #define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET) | 103 | #define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET) |
| 104 | #define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET) | 104 | #define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET) |
| 105 | 105 | ||
| 106 | /* DI_DISP_SIG_POL bits */ | 106 | /* DI_DISP_SIG_POL bits */ |
| 107 | #define DI_D3_VSYNC_POL_SHIFT 28 | 107 | #define DI_D3_VSYNC_POL_SHIFT 28 |
| 108 | #define DI_D3_HSYNC_POL_SHIFT 27 | 108 | #define DI_D3_HSYNC_POL_SHIFT 27 |
| 109 | #define DI_D3_DRDY_SHARP_POL_SHIFT 26 | 109 | #define DI_D3_DRDY_SHARP_POL_SHIFT 26 |
| 110 | #define DI_D3_CLK_POL_SHIFT 25 | 110 | #define DI_D3_CLK_POL_SHIFT 25 |
| 111 | #define DI_D3_DATA_POL_SHIFT 24 | 111 | #define DI_D3_DATA_POL_SHIFT 24 |
| 112 | 112 | ||
| 113 | /* DI_DISP_IF_CONF bits */ | 113 | /* DI_DISP_IF_CONF bits */ |
| 114 | #define DI_D3_CLK_IDLE_SHIFT 26 | 114 | #define DI_D3_CLK_IDLE_SHIFT 26 |
| 115 | #define DI_D3_CLK_SEL_SHIFT 25 | 115 | #define DI_D3_CLK_SEL_SHIFT 25 |
| 116 | #define DI_D3_DATAMSK_SHIFT 24 | 116 | #define DI_D3_DATAMSK_SHIFT 24 |
| 117 | 117 | ||
| 118 | enum ipu_panel { | 118 | enum ipu_panel { |
| 119 | IPU_PANEL_SHARP_TFT, | 119 | IPU_PANEL_SHARP_TFT, |
| 120 | IPU_PANEL_TFT, | 120 | IPU_PANEL_TFT, |
| 121 | }; | 121 | }; |
| 122 | 122 | ||
| 123 | struct ipu_di_signal_cfg { | 123 | struct ipu_di_signal_cfg { |
| 124 | unsigned datamask_en:1; | 124 | unsigned datamask_en:1; |
| 125 | unsigned clksel_en:1; | 125 | unsigned clksel_en:1; |
| 126 | unsigned clkidle_en:1; | 126 | unsigned clkidle_en:1; |
| 127 | unsigned data_pol:1; /* true = inverted */ | 127 | unsigned data_pol:1; /* true = inverted */ |
| 128 | unsigned clk_pol:1; /* true = rising edge */ | 128 | unsigned clk_pol:1; /* true = rising edge */ |
| 129 | unsigned enable_pol:1; | 129 | unsigned enable_pol:1; |
| 130 | unsigned Hsync_pol:1; /* true = active high */ | 130 | unsigned Hsync_pol:1; /* true = active high */ |
| 131 | unsigned Vsync_pol:1; | 131 | unsigned Vsync_pol:1; |
| 132 | }; | 132 | }; |
| 133 | 133 | ||
| 134 | static const struct fb_videomode mx3fb_modedb[] = { | 134 | static const struct fb_videomode mx3fb_modedb[] = { |
| 135 | { | 135 | { |
| 136 | /* 240x320 @ 60 Hz */ | 136 | /* 240x320 @ 60 Hz */ |
| 137 | .name = "Sharp-QVGA", | 137 | .name = "Sharp-QVGA", |
| 138 | .refresh = 60, | 138 | .refresh = 60, |
| 139 | .xres = 240, | 139 | .xres = 240, |
| 140 | .yres = 320, | 140 | .yres = 320, |
| 141 | .pixclock = 185925, | 141 | .pixclock = 185925, |
| 142 | .left_margin = 9, | 142 | .left_margin = 9, |
| 143 | .right_margin = 16, | 143 | .right_margin = 16, |
| 144 | .upper_margin = 7, | 144 | .upper_margin = 7, |
| 145 | .lower_margin = 9, | 145 | .lower_margin = 9, |
| 146 | .hsync_len = 1, | 146 | .hsync_len = 1, |
| 147 | .vsync_len = 1, | 147 | .vsync_len = 1, |
| 148 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | | 148 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | |
| 149 | FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | | 149 | FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | |
| 150 | FB_SYNC_CLK_IDLE_EN, | 150 | FB_SYNC_CLK_IDLE_EN, |
| 151 | .vmode = FB_VMODE_NONINTERLACED, | 151 | .vmode = FB_VMODE_NONINTERLACED, |
| 152 | .flag = 0, | 152 | .flag = 0, |
| 153 | }, { | 153 | }, { |
| 154 | /* 240x33 @ 60 Hz */ | 154 | /* 240x33 @ 60 Hz */ |
| 155 | .name = "Sharp-CLI", | 155 | .name = "Sharp-CLI", |
| 156 | .refresh = 60, | 156 | .refresh = 60, |
| 157 | .xres = 240, | 157 | .xres = 240, |
| 158 | .yres = 33, | 158 | .yres = 33, |
| 159 | .pixclock = 185925, | 159 | .pixclock = 185925, |
| 160 | .left_margin = 9, | 160 | .left_margin = 9, |
| 161 | .right_margin = 16, | 161 | .right_margin = 16, |
| 162 | .upper_margin = 7, | 162 | .upper_margin = 7, |
| 163 | .lower_margin = 9 + 287, | 163 | .lower_margin = 9 + 287, |
| 164 | .hsync_len = 1, | 164 | .hsync_len = 1, |
| 165 | .vsync_len = 1, | 165 | .vsync_len = 1, |
| 166 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | | 166 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | |
| 167 | FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | | 167 | FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | |
| 168 | FB_SYNC_CLK_IDLE_EN, | 168 | FB_SYNC_CLK_IDLE_EN, |
| 169 | .vmode = FB_VMODE_NONINTERLACED, | 169 | .vmode = FB_VMODE_NONINTERLACED, |
| 170 | .flag = 0, | 170 | .flag = 0, |
| 171 | }, { | 171 | }, { |
| 172 | /* 640x480 @ 60 Hz */ | 172 | /* 640x480 @ 60 Hz */ |
| 173 | .name = "NEC-VGA", | 173 | .name = "NEC-VGA", |
| 174 | .refresh = 60, | 174 | .refresh = 60, |
| 175 | .xres = 640, | 175 | .xres = 640, |
| 176 | .yres = 480, | 176 | .yres = 480, |
| 177 | .pixclock = 38255, | 177 | .pixclock = 38255, |
| 178 | .left_margin = 144, | 178 | .left_margin = 144, |
| 179 | .right_margin = 0, | 179 | .right_margin = 0, |
| 180 | .upper_margin = 34, | 180 | .upper_margin = 34, |
| 181 | .lower_margin = 40, | 181 | .lower_margin = 40, |
| 182 | .hsync_len = 1, | 182 | .hsync_len = 1, |
| 183 | .vsync_len = 1, | 183 | .vsync_len = 1, |
| 184 | .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, | 184 | .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, |
| 185 | .vmode = FB_VMODE_NONINTERLACED, | 185 | .vmode = FB_VMODE_NONINTERLACED, |
| 186 | .flag = 0, | 186 | .flag = 0, |
| 187 | }, { | 187 | }, { |
| 188 | /* NTSC TV output */ | 188 | /* NTSC TV output */ |
| 189 | .name = "TV-NTSC", | 189 | .name = "TV-NTSC", |
| 190 | .refresh = 60, | 190 | .refresh = 60, |
| 191 | .xres = 640, | 191 | .xres = 640, |
| 192 | .yres = 480, | 192 | .yres = 480, |
| 193 | .pixclock = 37538, | 193 | .pixclock = 37538, |
| 194 | .left_margin = 38, | 194 | .left_margin = 38, |
| 195 | .right_margin = 858 - 640 - 38 - 3, | 195 | .right_margin = 858 - 640 - 38 - 3, |
| 196 | .upper_margin = 36, | 196 | .upper_margin = 36, |
| 197 | .lower_margin = 518 - 480 - 36 - 1, | 197 | .lower_margin = 518 - 480 - 36 - 1, |
| 198 | .hsync_len = 3, | 198 | .hsync_len = 3, |
| 199 | .vsync_len = 1, | 199 | .vsync_len = 1, |
| 200 | .sync = 0, | 200 | .sync = 0, |
| 201 | .vmode = FB_VMODE_NONINTERLACED, | 201 | .vmode = FB_VMODE_NONINTERLACED, |
| 202 | .flag = 0, | 202 | .flag = 0, |
| 203 | }, { | 203 | }, { |
| 204 | /* PAL TV output */ | 204 | /* PAL TV output */ |
| 205 | .name = "TV-PAL", | 205 | .name = "TV-PAL", |
| 206 | .refresh = 50, | 206 | .refresh = 50, |
| 207 | .xres = 640, | 207 | .xres = 640, |
| 208 | .yres = 480, | 208 | .yres = 480, |
| 209 | .pixclock = 37538, | 209 | .pixclock = 37538, |
| 210 | .left_margin = 38, | 210 | .left_margin = 38, |
| 211 | .right_margin = 960 - 640 - 38 - 32, | 211 | .right_margin = 960 - 640 - 38 - 32, |
| 212 | .upper_margin = 32, | 212 | .upper_margin = 32, |
| 213 | .lower_margin = 555 - 480 - 32 - 3, | 213 | .lower_margin = 555 - 480 - 32 - 3, |
| 214 | .hsync_len = 32, | 214 | .hsync_len = 32, |
| 215 | .vsync_len = 3, | 215 | .vsync_len = 3, |
| 216 | .sync = 0, | 216 | .sync = 0, |
| 217 | .vmode = FB_VMODE_NONINTERLACED, | 217 | .vmode = FB_VMODE_NONINTERLACED, |
| 218 | .flag = 0, | 218 | .flag = 0, |
| 219 | }, { | 219 | }, { |
| 220 | /* TV output VGA mode, 640x480 @ 65 Hz */ | 220 | /* TV output VGA mode, 640x480 @ 65 Hz */ |
| 221 | .name = "TV-VGA", | 221 | .name = "TV-VGA", |
| 222 | .refresh = 60, | 222 | .refresh = 60, |
| 223 | .xres = 640, | 223 | .xres = 640, |
| 224 | .yres = 480, | 224 | .yres = 480, |
| 225 | .pixclock = 40574, | 225 | .pixclock = 40574, |
| 226 | .left_margin = 35, | 226 | .left_margin = 35, |
| 227 | .right_margin = 45, | 227 | .right_margin = 45, |
| 228 | .upper_margin = 9, | 228 | .upper_margin = 9, |
| 229 | .lower_margin = 1, | 229 | .lower_margin = 1, |
| 230 | .hsync_len = 46, | 230 | .hsync_len = 46, |
| 231 | .vsync_len = 5, | 231 | .vsync_len = 5, |
| 232 | .sync = 0, | 232 | .sync = 0, |
| 233 | .vmode = FB_VMODE_NONINTERLACED, | 233 | .vmode = FB_VMODE_NONINTERLACED, |
| 234 | .flag = 0, | 234 | .flag = 0, |
| 235 | }, | 235 | }, |
| 236 | }; | 236 | }; |
| 237 | 237 | ||
| 238 | struct mx3fb_data { | 238 | struct mx3fb_data { |
| 239 | struct fb_info *fbi; | 239 | struct fb_info *fbi; |
| 240 | int backlight_level; | 240 | int backlight_level; |
| 241 | void __iomem *reg_base; | 241 | void __iomem *reg_base; |
| 242 | spinlock_t lock; | 242 | spinlock_t lock; |
| 243 | struct device *dev; | 243 | struct device *dev; |
| 244 | 244 | ||
| 245 | uint32_t h_start_width; | 245 | uint32_t h_start_width; |
| 246 | uint32_t v_start_width; | 246 | uint32_t v_start_width; |
| 247 | }; | 247 | }; |
| 248 | 248 | ||
| 249 | struct dma_chan_request { | 249 | struct dma_chan_request { |
| 250 | struct mx3fb_data *mx3fb; | 250 | struct mx3fb_data *mx3fb; |
| 251 | enum ipu_channel id; | 251 | enum ipu_channel id; |
| 252 | }; | 252 | }; |
| 253 | 253 | ||
| 254 | /* MX3 specific framebuffer information. */ | 254 | /* MX3 specific framebuffer information. */ |
| 255 | struct mx3fb_info { | 255 | struct mx3fb_info { |
| 256 | int blank; | 256 | int blank; |
| 257 | enum ipu_channel ipu_ch; | 257 | enum ipu_channel ipu_ch; |
| 258 | uint32_t cur_ipu_buf; | 258 | uint32_t cur_ipu_buf; |
| 259 | 259 | ||
| 260 | u32 pseudo_palette[16]; | 260 | u32 pseudo_palette[16]; |
| 261 | 261 | ||
| 262 | struct completion flip_cmpl; | 262 | struct completion flip_cmpl; |
| 263 | struct mutex mutex; /* Protects fb-ops */ | 263 | struct mutex mutex; /* Protects fb-ops */ |
| 264 | struct mx3fb_data *mx3fb; | 264 | struct mx3fb_data *mx3fb; |
| 265 | struct idmac_channel *idmac_channel; | 265 | struct idmac_channel *idmac_channel; |
| 266 | struct dma_async_tx_descriptor *txd; | 266 | struct dma_async_tx_descriptor *txd; |
| 267 | dma_cookie_t cookie; | 267 | dma_cookie_t cookie; |
| 268 | struct scatterlist sg[2]; | 268 | struct scatterlist sg[2]; |
| 269 | 269 | ||
| 270 | u32 sync; /* preserve var->sync flags */ | 270 | u32 sync; /* preserve var->sync flags */ |
| 271 | }; | 271 | }; |
| 272 | 272 | ||
| 273 | static void mx3fb_dma_done(void *); | 273 | static void mx3fb_dma_done(void *); |
| @@ -278,389 +278,389 @@ static unsigned long default_bpp = 16; | |||
| 278 | 278 | ||
| 279 | static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg) | 279 | static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg) |
| 280 | { | 280 | { |
| 281 | return __raw_readl(mx3fb->reg_base + reg); | 281 | return __raw_readl(mx3fb->reg_base + reg); |
| 282 | } | 282 | } |
| 283 | 283 | ||
| 284 | static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg) | 284 | static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg) |
| 285 | { | 285 | { |
| 286 | __raw_writel(value, mx3fb->reg_base + reg); | 286 | __raw_writel(value, mx3fb->reg_base + reg); |
| 287 | } | 287 | } |
| 288 | 288 | ||
| 289 | static const uint32_t di_mappings[] = { | 289 | static const uint32_t di_mappings[] = { |
| 290 | 0x1600AAAA, 0x00E05555, 0x00070000, 3, /* RGB888 */ | 290 | 0x1600AAAA, 0x00E05555, 0x00070000, 3, /* RGB888 */ |
| 291 | 0x0005000F, 0x000B000F, 0x0011000F, 1, /* RGB666 */ | 291 | 0x0005000F, 0x000B000F, 0x0011000F, 1, /* RGB666 */ |
| 292 | 0x0011000F, 0x000B000F, 0x0005000F, 1, /* BGR666 */ | 292 | 0x0011000F, 0x000B000F, 0x0005000F, 1, /* BGR666 */ |
| 293 | 0x0004003F, 0x000A000F, 0x000F003F, 1 /* RGB565 */ | 293 | 0x0004003F, 0x000A000F, 0x000F003F, 1 /* RGB565 */ |
| 294 | }; | 294 | }; |
| 295 | 295 | ||
| 296 | static void sdc_fb_init(struct mx3fb_info *fbi) | 296 | static void sdc_fb_init(struct mx3fb_info *fbi) |
| 297 | { | 297 | { |
| 298 | struct mx3fb_data *mx3fb = fbi->mx3fb; | 298 | struct mx3fb_data *mx3fb = fbi->mx3fb; |
| 299 | uint32_t reg; | 299 | uint32_t reg; |
| 300 | 300 | ||
| 301 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); | 301 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); |
| 302 | 302 | ||
| 303 | mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF); | 303 | mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF); |
| 304 | } | 304 | } |
| 305 | 305 | ||
| 306 | /* Returns enabled flag before uninit */ | 306 | /* Returns enabled flag before uninit */ |
| 307 | static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi) | 307 | static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi) |
| 308 | { | 308 | { |
| 309 | struct mx3fb_data *mx3fb = fbi->mx3fb; | 309 | struct mx3fb_data *mx3fb = fbi->mx3fb; |
| 310 | uint32_t reg; | 310 | uint32_t reg; |
| 311 | 311 | ||
| 312 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); | 312 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); |
| 313 | 313 | ||
| 314 | mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF); | 314 | mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF); |
| 315 | 315 | ||
| 316 | return reg & SDC_COM_BG_EN; | 316 | return reg & SDC_COM_BG_EN; |
| 317 | } | 317 | } |
| 318 | 318 | ||
| 319 | static void sdc_enable_channel(struct mx3fb_info *mx3_fbi) | 319 | static void sdc_enable_channel(struct mx3fb_info *mx3_fbi) |
| 320 | { | 320 | { |
| 321 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; | 321 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; |
| 322 | struct idmac_channel *ichan = mx3_fbi->idmac_channel; | 322 | struct idmac_channel *ichan = mx3_fbi->idmac_channel; |
| 323 | struct dma_chan *dma_chan = &ichan->dma_chan; | 323 | struct dma_chan *dma_chan = &ichan->dma_chan; |
| 324 | unsigned long flags; | 324 | unsigned long flags; |
| 325 | dma_cookie_t cookie; | 325 | dma_cookie_t cookie; |
| 326 | 326 | ||
| 327 | dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, | 327 | dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, |
| 328 | to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); | 328 | to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); |
| 329 | 329 | ||
| 330 | /* This enables the channel */ | 330 | /* This enables the channel */ |
| 331 | if (mx3_fbi->cookie < 0) { | 331 | if (mx3_fbi->cookie < 0) { |
| 332 | mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan, | 332 | mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan, |
| 333 | &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); | 333 | &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); |
| 334 | if (!mx3_fbi->txd) { | 334 | if (!mx3_fbi->txd) { |
| 335 | dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n", | 335 | dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n", |
| 336 | dma_chan->chan_id); | 336 | dma_chan->chan_id); |
| 337 | return; | 337 | return; |
| 338 | } | 338 | } |
| 339 | 339 | ||
| 340 | mx3_fbi->txd->callback_param = mx3_fbi->txd; | 340 | mx3_fbi->txd->callback_param = mx3_fbi->txd; |
| 341 | mx3_fbi->txd->callback = mx3fb_dma_done; | 341 | mx3_fbi->txd->callback = mx3fb_dma_done; |
| 342 | 342 | ||
| 343 | cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd); | 343 | cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd); |
| 344 | dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__, | 344 | dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__, |
| 345 | mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); | 345 | mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); |
| 346 | } else { | 346 | } else { |
| 347 | if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) { | 347 | if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) { |
| 348 | dev_err(mx3fb->dev, "Cannot enable channel %d\n", | 348 | dev_err(mx3fb->dev, "Cannot enable channel %d\n", |
| 349 | dma_chan->chan_id); | 349 | dma_chan->chan_id); |
| 350 | return; | 350 | return; |
| 351 | } | 351 | } |
| 352 | 352 | ||
| 353 | /* Just re-activate the same buffer */ | 353 | /* Just re-activate the same buffer */ |
| 354 | dma_async_issue_pending(dma_chan); | 354 | dma_async_issue_pending(dma_chan); |
| 355 | cookie = mx3_fbi->cookie; | 355 | cookie = mx3_fbi->cookie; |
| 356 | dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__, | 356 | dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__, |
| 357 | mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); | 357 | mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); |
| 358 | } | 358 | } |
| 359 | 359 | ||
| 360 | if (cookie >= 0) { | 360 | if (cookie >= 0) { |
| 361 | spin_lock_irqsave(&mx3fb->lock, flags); | 361 | spin_lock_irqsave(&mx3fb->lock, flags); |
| 362 | sdc_fb_init(mx3_fbi); | 362 | sdc_fb_init(mx3_fbi); |
| 363 | mx3_fbi->cookie = cookie; | 363 | mx3_fbi->cookie = cookie; |
| 364 | spin_unlock_irqrestore(&mx3fb->lock, flags); | 364 | spin_unlock_irqrestore(&mx3fb->lock, flags); |
| 365 | } | 365 | } |
| 366 | 366 | ||
| 367 | /* | 367 | /* |
| 368 | * Attention! Without this msleep the channel keeps generating | 368 | * Attention! Without this msleep the channel keeps generating |
| 369 | * interrupts. Next sdc_set_brightness() is going to be called | 369 | * interrupts. Next sdc_set_brightness() is going to be called |
| 370 | * from mx3fb_blank(). | 370 | * from mx3fb_blank(). |
| 371 | */ | 371 | */ |
| 372 | msleep(2); | 372 | msleep(2); |
| 373 | } | 373 | } |
| 374 | 374 | ||
| 375 | static void sdc_disable_channel(struct mx3fb_info *mx3_fbi) | 375 | static void sdc_disable_channel(struct mx3fb_info *mx3_fbi) |
| 376 | { | 376 | { |
| 377 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; | 377 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; |
| 378 | uint32_t enabled; | 378 | uint32_t enabled; |
| 379 | unsigned long flags; | 379 | unsigned long flags; |
| 380 | 380 | ||
| 381 | spin_lock_irqsave(&mx3fb->lock, flags); | 381 | spin_lock_irqsave(&mx3fb->lock, flags); |
| 382 | 382 | ||
| 383 | enabled = sdc_fb_uninit(mx3_fbi); | 383 | enabled = sdc_fb_uninit(mx3_fbi); |
| 384 | 384 | ||
| 385 | spin_unlock_irqrestore(&mx3fb->lock, flags); | 385 | spin_unlock_irqrestore(&mx3fb->lock, flags); |
| 386 | 386 | ||
| 387 | mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan); | 387 | mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan); |
| 388 | mx3_fbi->txd = NULL; | 388 | mx3_fbi->txd = NULL; |
| 389 | mx3_fbi->cookie = -EINVAL; | 389 | mx3_fbi->cookie = -EINVAL; |
| 390 | } | 390 | } |
| 391 | 391 | ||
| 392 | /** | 392 | /** |
| 393 | * sdc_set_window_pos() - set window position of the respective plane. | 393 | * sdc_set_window_pos() - set window position of the respective plane. |
| 394 | * @mx3fb: mx3fb context. | 394 | * @mx3fb: mx3fb context. |
| 395 | * @channel: IPU DMAC channel ID. | 395 | * @channel: IPU DMAC channel ID. |
| 396 | * @x_pos: X coordinate relative to the top left corner to place window at. | 396 | * @x_pos: X coordinate relative to the top left corner to place window at. |
| 397 | * @y_pos: Y coordinate relative to the top left corner to place window at. | 397 | * @y_pos: Y coordinate relative to the top left corner to place window at. |
| 398 | * @return: 0 on success or negative error code on failure. | 398 | * @return: 0 on success or negative error code on failure. |
| 399 | */ | 399 | */ |
| 400 | static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel, | 400 | static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel, |
| 401 | int16_t x_pos, int16_t y_pos) | 401 | int16_t x_pos, int16_t y_pos) |
| 402 | { | 402 | { |
| 403 | x_pos += mx3fb->h_start_width; | 403 | x_pos += mx3fb->h_start_width; |
| 404 | y_pos += mx3fb->v_start_width; | 404 | y_pos += mx3fb->v_start_width; |
| 405 | 405 | ||
| 406 | if (channel != IDMAC_SDC_0) | 406 | if (channel != IDMAC_SDC_0) |
| 407 | return -EINVAL; | 407 | return -EINVAL; |
| 408 | 408 | ||
| 409 | mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS); | 409 | mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS); |
| 410 | return 0; | 410 | return 0; |
| 411 | } | 411 | } |
| 412 | 412 | ||
| 413 | /** | 413 | /** |
| 414 | * sdc_init_panel() - initialize a synchronous LCD panel. | 414 | * sdc_init_panel() - initialize a synchronous LCD panel. |
| 415 | * @mx3fb: mx3fb context. | 415 | * @mx3fb: mx3fb context. |
| 416 | * @panel: panel type. | 416 | * @panel: panel type. |
| 417 | * @pixel_clk: desired pixel clock frequency in Hz. | 417 | * @pixel_clk: desired pixel clock frequency in Hz. |
| 418 | * @width: width of panel in pixels. | 418 | * @width: width of panel in pixels. |
| 419 | * @height: height of panel in pixels. | 419 | * @height: height of panel in pixels. |
| 420 | * @pixel_fmt: pixel format of buffer as FOURCC ASCII code. | 420 | * @pixel_fmt: pixel format of buffer as FOURCC ASCII code. |
| 421 | * @h_start_width: number of pixel clocks between the HSYNC signal pulse | 421 | * @h_start_width: number of pixel clocks between the HSYNC signal pulse |
| 422 | * and the start of valid data. | 422 | * and the start of valid data. |
| 423 | * @h_sync_width: width of the HSYNC signal in units of pixel clocks. | 423 | * @h_sync_width: width of the HSYNC signal in units of pixel clocks. |
| 424 | * @h_end_width: number of pixel clocks between the end of valid data | 424 | * @h_end_width: number of pixel clocks between the end of valid data |
| 425 | * and the HSYNC signal for next line. | 425 | * and the HSYNC signal for next line. |
| 426 | * @v_start_width: number of lines between the VSYNC signal pulse and the | 426 | * @v_start_width: number of lines between the VSYNC signal pulse and the |
| 427 | * start of valid data. | 427 | * start of valid data. |
| 428 | * @v_sync_width: width of the VSYNC signal in units of lines | 428 | * @v_sync_width: width of the VSYNC signal in units of lines |
| 429 | * @v_end_width: number of lines between the end of valid data and the | 429 | * @v_end_width: number of lines between the end of valid data and the |
| 430 | * VSYNC signal for next frame. | 430 | * VSYNC signal for next frame. |
| 431 | * @sig: bitfield of signal polarities for LCD interface. | 431 | * @sig: bitfield of signal polarities for LCD interface. |
| 432 | * @return: 0 on success or negative error code on failure. | 432 | * @return: 0 on success or negative error code on failure. |
| 433 | */ | 433 | */ |
| 434 | static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel, | 434 | static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel, |
| 435 | uint32_t pixel_clk, | 435 | uint32_t pixel_clk, |
| 436 | uint16_t width, uint16_t height, | 436 | uint16_t width, uint16_t height, |
| 437 | enum pixel_fmt pixel_fmt, | 437 | enum pixel_fmt pixel_fmt, |
| 438 | uint16_t h_start_width, uint16_t h_sync_width, | 438 | uint16_t h_start_width, uint16_t h_sync_width, |
| 439 | uint16_t h_end_width, uint16_t v_start_width, | 439 | uint16_t h_end_width, uint16_t v_start_width, |
| 440 | uint16_t v_sync_width, uint16_t v_end_width, | 440 | uint16_t v_sync_width, uint16_t v_end_width, |
| 441 | struct ipu_di_signal_cfg sig) | 441 | struct ipu_di_signal_cfg sig) |
| 442 | { | 442 | { |
| 443 | unsigned long lock_flags; | 443 | unsigned long lock_flags; |
| 444 | uint32_t reg; | 444 | uint32_t reg; |
| 445 | uint32_t old_conf; | 445 | uint32_t old_conf; |
| 446 | uint32_t div; | 446 | uint32_t div; |
| 447 | struct clk *ipu_clk; | 447 | struct clk *ipu_clk; |
| 448 | 448 | ||
| 449 | dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height); | 449 | dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height); |
| 450 | 450 | ||
| 451 | if (v_sync_width == 0 || h_sync_width == 0) | 451 | if (v_sync_width == 0 || h_sync_width == 0) |
| 452 | return -EINVAL; | 452 | return -EINVAL; |
| 453 | 453 | ||
| 454 | /* Init panel size and blanking periods */ | 454 | /* Init panel size and blanking periods */ |
| 455 | reg = ((uint32_t) (h_sync_width - 1) << 26) | | 455 | reg = ((uint32_t) (h_sync_width - 1) << 26) | |
| 456 | ((uint32_t) (width + h_start_width + h_end_width - 1) << 16); | 456 | ((uint32_t) (width + h_start_width + h_end_width - 1) << 16); |
| 457 | mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF); | 457 | mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF); |
| 458 | 458 | ||
| 459 | #ifdef DEBUG | 459 | #ifdef DEBUG |
| 460 | printk(KERN_CONT " hor_conf %x,", reg); | 460 | printk(KERN_CONT " hor_conf %x,", reg); |
| 461 | #endif | 461 | #endif |
| 462 | 462 | ||
| 463 | reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L | | 463 | reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L | |
| 464 | ((uint32_t) (height + v_start_width + v_end_width - 1) << 16); | 464 | ((uint32_t) (height + v_start_width + v_end_width - 1) << 16); |
| 465 | mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF); | 465 | mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF); |
| 466 | 466 | ||
| 467 | #ifdef DEBUG | 467 | #ifdef DEBUG |
| 468 | printk(KERN_CONT " ver_conf %x\n", reg); | 468 | printk(KERN_CONT " ver_conf %x\n", reg); |
| 469 | #endif | 469 | #endif |
| 470 | 470 | ||
| 471 | mx3fb->h_start_width = h_start_width; | 471 | mx3fb->h_start_width = h_start_width; |
| 472 | mx3fb->v_start_width = v_start_width; | 472 | mx3fb->v_start_width = v_start_width; |
| 473 | 473 | ||
| 474 | switch (panel) { | 474 | switch (panel) { |
| 475 | case IPU_PANEL_SHARP_TFT: | 475 | case IPU_PANEL_SHARP_TFT: |
| 476 | mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1); | 476 | mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1); |
| 477 | mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2); | 477 | mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2); |
| 478 | mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF); | 478 | mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF); |
| 479 | break; | 479 | break; |
| 480 | case IPU_PANEL_TFT: | 480 | case IPU_PANEL_TFT: |
| 481 | mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF); | 481 | mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF); |
| 482 | break; | 482 | break; |
| 483 | default: | 483 | default: |
| 484 | return -EINVAL; | 484 | return -EINVAL; |
| 485 | } | 485 | } |
| 486 | 486 | ||
| 487 | /* Init clocking */ | 487 | /* Init clocking */ |
| 488 | 488 | ||
| 489 | /* | 489 | /* |
| 490 | * Calculate divider: fractional part is 4 bits so simply multiple by | 490 | * Calculate divider: fractional part is 4 bits so simply multiple by |
| 491 | * 24 to get fractional part, as long as we stay under ~250MHz and on | 491 | * 2^4 to get fractional part, as long as we stay under ~250MHz and on |
| 492 | * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz | 492 | * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz |
| 493 | */ | 493 | */ |
| 494 | dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk); | 494 | dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk); |
| 495 | 495 | ||
| 496 | ipu_clk = clk_get(mx3fb->dev, "ipu_clk"); | 496 | ipu_clk = clk_get(mx3fb->dev, NULL); |
| 497 | div = clk_get_rate(ipu_clk) * 16 / pixel_clk; | 497 | div = clk_get_rate(ipu_clk) * 16 / pixel_clk; |
| 498 | clk_put(ipu_clk); | 498 | clk_put(ipu_clk); |
| 499 | 499 | ||
| 500 | if (div < 0x40) { /* Divider less than 4 */ | 500 | if (div < 0x40) { /* Divider less than 4 */ |
| 501 | dev_dbg(mx3fb->dev, | 501 | dev_dbg(mx3fb->dev, |
| 502 | "InitPanel() - Pixel clock divider less than 4\n"); | 502 | "InitPanel() - Pixel clock divider less than 4\n"); |
| 503 | div = 0x40; | 503 | div = 0x40; |
| 504 | } | 504 | } |
| 505 | 505 | ||
| 506 | spin_lock_irqsave(&mx3fb->lock, lock_flags); | 506 | spin_lock_irqsave(&mx3fb->lock, lock_flags); |
| 507 | 507 | ||
| 508 | /* | 508 | /* |
| 509 | * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits | 509 | * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits |
| 510 | * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing | 510 | * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing |
| 511 | * debug. DISP3_IF_CLK_UP_WR is 0 | 511 | * debug. DISP3_IF_CLK_UP_WR is 0 |
| 512 | */ | 512 | */ |
| 513 | mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF); | 513 | mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF); |
| 514 | 514 | ||
| 515 | /* DI settings */ | 515 | /* DI settings */ |
| 516 | old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF; | 516 | old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF; |
| 517 | old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT | | 517 | old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT | |
| 518 | sig.clksel_en << DI_D3_CLK_SEL_SHIFT | | 518 | sig.clksel_en << DI_D3_CLK_SEL_SHIFT | |
| 519 | sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT; | 519 | sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT; |
| 520 | mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF); | 520 | mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF); |
| 521 | 521 | ||
| 522 | old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF; | 522 | old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF; |
| 523 | old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT | | 523 | old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT | |
| 524 | sig.clk_pol << DI_D3_CLK_POL_SHIFT | | 524 | sig.clk_pol << DI_D3_CLK_POL_SHIFT | |
| 525 | sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT | | 525 | sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT | |
| 526 | sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT | | 526 | sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT | |
| 527 | sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT; | 527 | sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT; |
| 528 | mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL); | 528 | mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL); |
| 529 | 529 | ||
| 530 | switch (pixel_fmt) { | 530 | switch (pixel_fmt) { |
| 531 | case IPU_PIX_FMT_RGB24: | 531 | case IPU_PIX_FMT_RGB24: |
| 532 | mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP); | 532 | mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP); |
| 533 | mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP); | 533 | mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP); |
| 534 | mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP); | 534 | mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP); |
| 535 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | | 535 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | |
| 536 | ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC); | 536 | ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC); |
| 537 | break; | 537 | break; |
| 538 | case IPU_PIX_FMT_RGB666: | 538 | case IPU_PIX_FMT_RGB666: |
| 539 | mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP); | 539 | mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP); |
| 540 | mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP); | 540 | mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP); |
| 541 | mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP); | 541 | mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP); |
| 542 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | | 542 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | |
| 543 | ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC); | 543 | ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC); |
| 544 | break; | 544 | break; |
| 545 | case IPU_PIX_FMT_BGR666: | 545 | case IPU_PIX_FMT_BGR666: |
| 546 | mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP); | 546 | mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP); |
| 547 | mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP); | 547 | mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP); |
| 548 | mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP); | 548 | mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP); |
| 549 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | | 549 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | |
| 550 | ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC); | 550 | ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC); |
| 551 | break; | 551 | break; |
| 552 | default: | 552 | default: |
| 553 | mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP); | 553 | mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP); |
| 554 | mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP); | 554 | mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP); |
| 555 | mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP); | 555 | mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP); |
| 556 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | | 556 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | |
| 557 | ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC); | 557 | ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC); |
| 558 | break; | 558 | break; |
| 559 | } | 559 | } |
| 560 | 560 | ||
| 561 | spin_unlock_irqrestore(&mx3fb->lock, lock_flags); | 561 | spin_unlock_irqrestore(&mx3fb->lock, lock_flags); |
| 562 | 562 | ||
| 563 | dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n", | 563 | dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n", |
| 564 | mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF)); | 564 | mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF)); |
| 565 | dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n", | 565 | dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n", |
| 566 | mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL)); | 566 | mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL)); |
| 567 | dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n", | 567 | dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n", |
| 568 | mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF)); | 568 | mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF)); |
| 569 | 569 | ||
| 570 | return 0; | 570 | return 0; |
| 571 | } | 571 | } |
| 572 | 572 | ||
| 573 | /** | 573 | /** |
| 574 | * sdc_set_color_key() - set the transparent color key for SDC graphic plane. | 574 | * sdc_set_color_key() - set the transparent color key for SDC graphic plane. |
| 575 | * @mx3fb: mx3fb context. | 575 | * @mx3fb: mx3fb context. |
| 576 | * @channel: IPU DMAC channel ID. | 576 | * @channel: IPU DMAC channel ID. |
| 577 | * @enable: boolean to enable or disable color keyl. | 577 | * @enable: boolean to enable or disable color keyl. |
| 578 | * @color_key: 24-bit RGB color to use as transparent color key. | 578 | * @color_key: 24-bit RGB color to use as transparent color key. |
| 579 | * @return: 0 on success or negative error code on failure. | 579 | * @return: 0 on success or negative error code on failure. |
| 580 | */ | 580 | */ |
| 581 | static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel, | 581 | static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel, |
| 582 | bool enable, uint32_t color_key) | 582 | bool enable, uint32_t color_key) |
| 583 | { | 583 | { |
| 584 | uint32_t reg, sdc_conf; | 584 | uint32_t reg, sdc_conf; |
| 585 | unsigned long lock_flags; | 585 | unsigned long lock_flags; |
| 586 | 586 | ||
| 587 | spin_lock_irqsave(&mx3fb->lock, lock_flags); | 587 | spin_lock_irqsave(&mx3fb->lock, lock_flags); |
| 588 | 588 | ||
| 589 | sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF); | 589 | sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF); |
| 590 | if (channel == IDMAC_SDC_0) | 590 | if (channel == IDMAC_SDC_0) |
| 591 | sdc_conf &= ~SDC_COM_GWSEL; | 591 | sdc_conf &= ~SDC_COM_GWSEL; |
| 592 | else | 592 | else |
| 593 | sdc_conf |= SDC_COM_GWSEL; | 593 | sdc_conf |= SDC_COM_GWSEL; |
| 594 | 594 | ||
| 595 | if (enable) { | 595 | if (enable) { |
| 596 | reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L; | 596 | reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L; |
| 597 | mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL), | 597 | mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL), |
| 598 | SDC_GW_CTRL); | 598 | SDC_GW_CTRL); |
| 599 | 599 | ||
| 600 | sdc_conf |= SDC_COM_KEY_COLOR_G; | 600 | sdc_conf |= SDC_COM_KEY_COLOR_G; |
| 601 | } else { | 601 | } else { |
| 602 | sdc_conf &= ~SDC_COM_KEY_COLOR_G; | 602 | sdc_conf &= ~SDC_COM_KEY_COLOR_G; |
| 603 | } | 603 | } |
| 604 | mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF); | 604 | mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF); |
| 605 | 605 | ||
| 606 | spin_unlock_irqrestore(&mx3fb->lock, lock_flags); | 606 | spin_unlock_irqrestore(&mx3fb->lock, lock_flags); |
| 607 | 607 | ||
| 608 | return 0; | 608 | return 0; |
| 609 | } | 609 | } |
| 610 | 610 | ||
| 611 | /** | 611 | /** |
| 612 | * sdc_set_global_alpha() - set global alpha blending modes. | 612 | * sdc_set_global_alpha() - set global alpha blending modes. |
| 613 | * @mx3fb: mx3fb context. | 613 | * @mx3fb: mx3fb context. |
| 614 | * @enable: boolean to enable or disable global alpha blending. If disabled, | 614 | * @enable: boolean to enable or disable global alpha blending. If disabled, |
| 615 | * per pixel blending is used. | 615 | * per pixel blending is used. |
| 616 | * @alpha: global alpha value. | 616 | * @alpha: global alpha value. |
| 617 | * @return: 0 on success or negative error code on failure. | 617 | * @return: 0 on success or negative error code on failure. |
| 618 | */ | 618 | */ |
| 619 | static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha) | 619 | static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha) |
| 620 | { | 620 | { |
| 621 | uint32_t reg; | 621 | uint32_t reg; |
| 622 | unsigned long lock_flags; | 622 | unsigned long lock_flags; |
| 623 | 623 | ||
| 624 | spin_lock_irqsave(&mx3fb->lock, lock_flags); | 624 | spin_lock_irqsave(&mx3fb->lock, lock_flags); |
| 625 | 625 | ||
| 626 | if (enable) { | 626 | if (enable) { |
| 627 | reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL; | 627 | reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL; |
| 628 | mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL); | 628 | mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL); |
| 629 | 629 | ||
| 630 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); | 630 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); |
| 631 | mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF); | 631 | mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF); |
| 632 | } else { | 632 | } else { |
| 633 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); | 633 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); |
| 634 | mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF); | 634 | mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF); |
| 635 | } | 635 | } |
| 636 | 636 | ||
| 637 | spin_unlock_irqrestore(&mx3fb->lock, lock_flags); | 637 | spin_unlock_irqrestore(&mx3fb->lock, lock_flags); |
| 638 | 638 | ||
| 639 | return 0; | 639 | return 0; |
| 640 | } | 640 | } |
| 641 | 641 | ||
| 642 | static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value) | 642 | static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value) |
| 643 | { | 643 | { |
| 644 | /* This might be board-specific */ | 644 | /* This might be board-specific */ |
| 645 | mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL); | 645 | mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL); |
| 646 | return; | 646 | return; |
| 647 | } | 647 | } |
| 648 | 648 | ||
| 649 | static uint32_t bpp_to_pixfmt(int bpp) | 649 | static uint32_t bpp_to_pixfmt(int bpp) |
| 650 | { | 650 | { |
| 651 | uint32_t pixfmt = 0; | 651 | uint32_t pixfmt = 0; |
| 652 | switch (bpp) { | 652 | switch (bpp) { |
| 653 | case 24: | 653 | case 24: |
| 654 | pixfmt = IPU_PIX_FMT_BGR24; | 654 | pixfmt = IPU_PIX_FMT_BGR24; |
| 655 | break; | 655 | break; |
| 656 | case 32: | 656 | case 32: |
| 657 | pixfmt = IPU_PIX_FMT_BGR32; | 657 | pixfmt = IPU_PIX_FMT_BGR32; |
| 658 | break; | 658 | break; |
| 659 | case 16: | 659 | case 16: |
| 660 | pixfmt = IPU_PIX_FMT_RGB565; | 660 | pixfmt = IPU_PIX_FMT_RGB565; |
| 661 | break; | 661 | break; |
| 662 | } | 662 | } |
| 663 | return pixfmt; | 663 | return pixfmt; |
| 664 | } | 664 | } |
| 665 | 665 | ||
| 666 | static int mx3fb_blank(int blank, struct fb_info *fbi); | 666 | static int mx3fb_blank(int blank, struct fb_info *fbi); |
| @@ -669,300 +669,300 @@ static int mx3fb_unmap_video_memory(struct fb_info *fbi); | |||
| 669 | 669 | ||
| 670 | /** | 670 | /** |
| 671 | * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings. | 671 | * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings. |
| 672 | * @info: framebuffer information pointer | 672 | * @info: framebuffer information pointer |
| 673 | * @return: 0 on success or negative error code on failure. | 673 | * @return: 0 on success or negative error code on failure. |
| 674 | */ | 674 | */ |
| 675 | static int mx3fb_set_fix(struct fb_info *fbi) | 675 | static int mx3fb_set_fix(struct fb_info *fbi) |
| 676 | { | 676 | { |
| 677 | struct fb_fix_screeninfo *fix = &fbi->fix; | 677 | struct fb_fix_screeninfo *fix = &fbi->fix; |
| 678 | struct fb_var_screeninfo *var = &fbi->var; | 678 | struct fb_var_screeninfo *var = &fbi->var; |
| 679 | 679 | ||
| 680 | strncpy(fix->id, "DISP3 BG", 8); | 680 | strncpy(fix->id, "DISP3 BG", 8); |
| 681 | 681 | ||
| 682 | fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; | 682 | fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; |
| 683 | 683 | ||
| 684 | fix->type = FB_TYPE_PACKED_PIXELS; | 684 | fix->type = FB_TYPE_PACKED_PIXELS; |
| 685 | fix->accel = FB_ACCEL_NONE; | 685 | fix->accel = FB_ACCEL_NONE; |
| 686 | fix->visual = FB_VISUAL_TRUECOLOR; | 686 | fix->visual = FB_VISUAL_TRUECOLOR; |
| 687 | fix->xpanstep = 1; | 687 | fix->xpanstep = 1; |
| 688 | fix->ypanstep = 1; | 688 | fix->ypanstep = 1; |
| 689 | 689 | ||
| 690 | return 0; | 690 | return 0; |
| 691 | } | 691 | } |
| 692 | 692 | ||
| 693 | static void mx3fb_dma_done(void *arg) | 693 | static void mx3fb_dma_done(void *arg) |
| 694 | { | 694 | { |
| 695 | struct idmac_tx_desc *tx_desc = to_tx_desc(arg); | 695 | struct idmac_tx_desc *tx_desc = to_tx_desc(arg); |
| 696 | struct dma_chan *chan = tx_desc->txd.chan; | 696 | struct dma_chan *chan = tx_desc->txd.chan; |
| 697 | struct idmac_channel *ichannel = to_idmac_chan(chan); | 697 | struct idmac_channel *ichannel = to_idmac_chan(chan); |
| 698 | struct mx3fb_data *mx3fb = ichannel->client; | 698 | struct mx3fb_data *mx3fb = ichannel->client; |
| 699 | struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; | 699 | struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; |
| 700 | 700 | ||
| 701 | dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq); | 701 | dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq); |
| 702 | 702 | ||
| 703 | /* We only need one interrupt, it will be re-enabled as needed */ | 703 | /* We only need one interrupt, it will be re-enabled as needed */ |
| 704 | disable_irq(ichannel->eof_irq); | 704 | disable_irq(ichannel->eof_irq); |
| 705 | 705 | ||
| 706 | complete(&mx3_fbi->flip_cmpl); | 706 | complete(&mx3_fbi->flip_cmpl); |
| 707 | } | 707 | } |
| 708 | 708 | ||
| 709 | /** | 709 | /** |
| 710 | * mx3fb_set_par() - set framebuffer parameters and change the operating mode. | 710 | * mx3fb_set_par() - set framebuffer parameters and change the operating mode. |
| 711 | * @fbi: framebuffer information pointer. | 711 | * @fbi: framebuffer information pointer. |
| 712 | * @return: 0 on success or negative error code on failure. | 712 | * @return: 0 on success or negative error code on failure. |
| 713 | */ | 713 | */ |
| 714 | static int mx3fb_set_par(struct fb_info *fbi) | 714 | static int mx3fb_set_par(struct fb_info *fbi) |
| 715 | { | 715 | { |
| 716 | u32 mem_len; | 716 | u32 mem_len; |
| 717 | struct ipu_di_signal_cfg sig_cfg; | 717 | struct ipu_di_signal_cfg sig_cfg; |
| 718 | enum ipu_panel mode = IPU_PANEL_TFT; | 718 | enum ipu_panel mode = IPU_PANEL_TFT; |
| 719 | struct mx3fb_info *mx3_fbi = fbi->par; | 719 | struct mx3fb_info *mx3_fbi = fbi->par; |
| 720 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; | 720 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; |
| 721 | struct idmac_channel *ichan = mx3_fbi->idmac_channel; | 721 | struct idmac_channel *ichan = mx3_fbi->idmac_channel; |
| 722 | struct idmac_video_param *video = &ichan->params.video; | 722 | struct idmac_video_param *video = &ichan->params.video; |
| 723 | struct scatterlist *sg = mx3_fbi->sg; | 723 | struct scatterlist *sg = mx3_fbi->sg; |
| 724 | size_t screen_size; | 724 | size_t screen_size; |
| 725 | 725 | ||
| 726 | dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+'); | 726 | dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+'); |
| 727 | 727 | ||
| 728 | mutex_lock(&mx3_fbi->mutex); | 728 | mutex_lock(&mx3_fbi->mutex); |
| 729 | 729 | ||
| 730 | /* Total cleanup */ | 730 | /* Total cleanup */ |
| 731 | if (mx3_fbi->txd) | 731 | if (mx3_fbi->txd) |
| 732 | sdc_disable_channel(mx3_fbi); | 732 | sdc_disable_channel(mx3_fbi); |
| 733 | 733 | ||
| 734 | mx3fb_set_fix(fbi); | 734 | mx3fb_set_fix(fbi); |
| 735 | 735 | ||
| 736 | mem_len = fbi->var.yres_virtual * fbi->fix.line_length; | 736 | mem_len = fbi->var.yres_virtual * fbi->fix.line_length; |
| 737 | if (mem_len > fbi->fix.smem_len) { | 737 | if (mem_len > fbi->fix.smem_len) { |
| 738 | if (fbi->fix.smem_start) | 738 | if (fbi->fix.smem_start) |
| 739 | mx3fb_unmap_video_memory(fbi); | 739 | mx3fb_unmap_video_memory(fbi); |
| 740 | 740 | ||
| 741 | fbi->fix.smem_len = mem_len; | 741 | fbi->fix.smem_len = mem_len; |
| 742 | if (mx3fb_map_video_memory(fbi) < 0) { | 742 | if (mx3fb_map_video_memory(fbi) < 0) { |
| 743 | mutex_unlock(&mx3_fbi->mutex); | 743 | mutex_unlock(&mx3_fbi->mutex); |
| 744 | return -ENOMEM; | 744 | return -ENOMEM; |
| 745 | } | 745 | } |
| 746 | } | 746 | } |
| 747 | 747 | ||
| 748 | screen_size = fbi->fix.line_length * fbi->var.yres; | 748 | screen_size = fbi->fix.line_length * fbi->var.yres; |
| 749 | 749 | ||
| 750 | sg_init_table(&sg[0], 1); | 750 | sg_init_table(&sg[0], 1); |
| 751 | sg_init_table(&sg[1], 1); | 751 | sg_init_table(&sg[1], 1); |
| 752 | 752 | ||
| 753 | sg_dma_address(&sg[0]) = fbi->fix.smem_start; | 753 | sg_dma_address(&sg[0]) = fbi->fix.smem_start; |
| 754 | sg_set_page(&sg[0], virt_to_page(fbi->screen_base), | 754 | sg_set_page(&sg[0], virt_to_page(fbi->screen_base), |
| 755 | fbi->fix.smem_len, | 755 | fbi->fix.smem_len, |
| 756 | offset_in_page(fbi->screen_base)); | 756 | offset_in_page(fbi->screen_base)); |
| 757 | 757 | ||
| 758 | if (mx3_fbi->ipu_ch == IDMAC_SDC_0) { | 758 | if (mx3_fbi->ipu_ch == IDMAC_SDC_0) { |
| 759 | memset(&sig_cfg, 0, sizeof(sig_cfg)); | 759 | memset(&sig_cfg, 0, sizeof(sig_cfg)); |
| 760 | if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT) | 760 | if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT) |
| 761 | sig_cfg.Hsync_pol = true; | 761 | sig_cfg.Hsync_pol = true; |
| 762 | if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT) | 762 | if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT) |
| 763 | sig_cfg.Vsync_pol = true; | 763 | sig_cfg.Vsync_pol = true; |
| 764 | if (fbi->var.sync & FB_SYNC_CLK_INVERT) | 764 | if (fbi->var.sync & FB_SYNC_CLK_INVERT) |
| 765 | sig_cfg.clk_pol = true; | 765 | sig_cfg.clk_pol = true; |
| 766 | if (fbi->var.sync & FB_SYNC_DATA_INVERT) | 766 | if (fbi->var.sync & FB_SYNC_DATA_INVERT) |
| 767 | sig_cfg.data_pol = true; | 767 | sig_cfg.data_pol = true; |
| 768 | if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH) | 768 | if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH) |
| 769 | sig_cfg.enable_pol = true; | 769 | sig_cfg.enable_pol = true; |
| 770 | if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN) | 770 | if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN) |
| 771 | sig_cfg.clkidle_en = true; | 771 | sig_cfg.clkidle_en = true; |
| 772 | if (fbi->var.sync & FB_SYNC_CLK_SEL_EN) | 772 | if (fbi->var.sync & FB_SYNC_CLK_SEL_EN) |
| 773 | sig_cfg.clksel_en = true; | 773 | sig_cfg.clksel_en = true; |
| 774 | if (fbi->var.sync & FB_SYNC_SHARP_MODE) | 774 | if (fbi->var.sync & FB_SYNC_SHARP_MODE) |
| 775 | mode = IPU_PANEL_SHARP_TFT; | 775 | mode = IPU_PANEL_SHARP_TFT; |
| 776 | 776 | ||
| 777 | dev_dbg(fbi->device, "pixclock = %ul Hz\n", | 777 | dev_dbg(fbi->device, "pixclock = %ul Hz\n", |
| 778 | (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL)); | 778 | (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL)); |
| 779 | 779 | ||
| 780 | if (sdc_init_panel(mx3fb, mode, | 780 | if (sdc_init_panel(mx3fb, mode, |
| 781 | (PICOS2KHZ(fbi->var.pixclock)) * 1000UL, | 781 | (PICOS2KHZ(fbi->var.pixclock)) * 1000UL, |
| 782 | fbi->var.xres, fbi->var.yres, | 782 | fbi->var.xres, fbi->var.yres, |
| 783 | (fbi->var.sync & FB_SYNC_SWAP_RGB) ? | 783 | (fbi->var.sync & FB_SYNC_SWAP_RGB) ? |
| 784 | IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666, | 784 | IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666, |
| 785 | fbi->var.left_margin, | 785 | fbi->var.left_margin, |
| 786 | fbi->var.hsync_len, | 786 | fbi->var.hsync_len, |
| 787 | fbi->var.right_margin + | 787 | fbi->var.right_margin + |
| 788 | fbi->var.hsync_len, | 788 | fbi->var.hsync_len, |
| 789 | fbi->var.upper_margin, | 789 | fbi->var.upper_margin, |
| 790 | fbi->var.vsync_len, | 790 | fbi->var.vsync_len, |
| 791 | fbi->var.lower_margin + | 791 | fbi->var.lower_margin + |
| 792 | fbi->var.vsync_len, sig_cfg) != 0) { | 792 | fbi->var.vsync_len, sig_cfg) != 0) { |
| 793 | mutex_unlock(&mx3_fbi->mutex); | 793 | mutex_unlock(&mx3_fbi->mutex); |
| 794 | dev_err(fbi->device, | 794 | dev_err(fbi->device, |
| 795 | "mx3fb: Error initializing panel.\n"); | 795 | "mx3fb: Error initializing panel.\n"); |
| 796 | return -EINVAL; | 796 | return -EINVAL; |
| 797 | } | 797 | } |
| 798 | } | 798 | } |
| 799 | 799 | ||
| 800 | sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0); | 800 | sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0); |
| 801 | 801 | ||
| 802 | mx3_fbi->cur_ipu_buf = 0; | 802 | mx3_fbi->cur_ipu_buf = 0; |
| 803 | 803 | ||
| 804 | video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel); | 804 | video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel); |
| 805 | video->out_width = fbi->var.xres; | 805 | video->out_width = fbi->var.xres; |
| 806 | video->out_height = fbi->var.yres; | 806 | video->out_height = fbi->var.yres; |
| 807 | video->out_stride = fbi->var.xres_virtual; | 807 | video->out_stride = fbi->var.xres_virtual; |
| 808 | 808 | ||
| 809 | if (mx3_fbi->blank == FB_BLANK_UNBLANK) | 809 | if (mx3_fbi->blank == FB_BLANK_UNBLANK) |
| 810 | sdc_enable_channel(mx3_fbi); | 810 | sdc_enable_channel(mx3_fbi); |
| 811 | 811 | ||
| 812 | mutex_unlock(&mx3_fbi->mutex); | 812 | mutex_unlock(&mx3_fbi->mutex); |
| 813 | 813 | ||
| 814 | return 0; | 814 | return 0; |
| 815 | } | 815 | } |
| 816 | 816 | ||
| 817 | /** | 817 | /** |
| 818 | * mx3fb_check_var() - check and adjust framebuffer variable parameters. | 818 | * mx3fb_check_var() - check and adjust framebuffer variable parameters. |
| 819 | * @var: framebuffer variable parameters | 819 | * @var: framebuffer variable parameters |
| 820 | * @fbi: framebuffer information pointer | 820 | * @fbi: framebuffer information pointer |
| 821 | */ | 821 | */ |
| 822 | static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) | 822 | static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) |
| 823 | { | 823 | { |
| 824 | struct mx3fb_info *mx3_fbi = fbi->par; | 824 | struct mx3fb_info *mx3_fbi = fbi->par; |
| 825 | u32 vtotal; | 825 | u32 vtotal; |
| 826 | u32 htotal; | 826 | u32 htotal; |
| 827 | 827 | ||
| 828 | dev_dbg(fbi->device, "%s\n", __func__); | 828 | dev_dbg(fbi->device, "%s\n", __func__); |
| 829 | 829 | ||
| 830 | if (var->xres_virtual < var->xres) | 830 | if (var->xres_virtual < var->xres) |
| 831 | var->xres_virtual = var->xres; | 831 | var->xres_virtual = var->xres; |
| 832 | if (var->yres_virtual < var->yres) | 832 | if (var->yres_virtual < var->yres) |
| 833 | var->yres_virtual = var->yres; | 833 | var->yres_virtual = var->yres; |
| 834 | 834 | ||
| 835 | if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && | 835 | if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && |
| 836 | (var->bits_per_pixel != 16)) | 836 | (var->bits_per_pixel != 16)) |
| 837 | var->bits_per_pixel = default_bpp; | 837 | var->bits_per_pixel = default_bpp; |
| 838 | 838 | ||
| 839 | switch (var->bits_per_pixel) { | 839 | switch (var->bits_per_pixel) { |
| 840 | case 16: | 840 | case 16: |
| 841 | var->red.length = 5; | 841 | var->red.length = 5; |
| 842 | var->red.offset = 11; | 842 | var->red.offset = 11; |
| 843 | var->red.msb_right = 0; | 843 | var->red.msb_right = 0; |
| 844 | 844 | ||
| 845 | var->green.length = 6; | 845 | var->green.length = 6; |
| 846 | var->green.offset = 5; | 846 | var->green.offset = 5; |
| 847 | var->green.msb_right = 0; | 847 | var->green.msb_right = 0; |
| 848 | 848 | ||
| 849 | var->blue.length = 5; | 849 | var->blue.length = 5; |
| 850 | var->blue.offset = 0; | 850 | var->blue.offset = 0; |
| 851 | var->blue.msb_right = 0; | 851 | var->blue.msb_right = 0; |
| 852 | 852 | ||
| 853 | var->transp.length = 0; | 853 | var->transp.length = 0; |
| 854 | var->transp.offset = 0; | 854 | var->transp.offset = 0; |
| 855 | var->transp.msb_right = 0; | 855 | var->transp.msb_right = 0; |
| 856 | break; | 856 | break; |
| 857 | case 24: | 857 | case 24: |
| 858 | var->red.length = 8; | 858 | var->red.length = 8; |
| 859 | var->red.offset = 16; | 859 | var->red.offset = 16; |
| 860 | var->red.msb_right = 0; | 860 | var->red.msb_right = 0; |
| 861 | 861 | ||
| 862 | var->green.length = 8; | 862 | var->green.length = 8; |
| 863 | var->green.offset = 8; | 863 | var->green.offset = 8; |
| 864 | var->green.msb_right = 0; | 864 | var->green.msb_right = 0; |
| 865 | 865 | ||
| 866 | var->blue.length = 8; | 866 | var->blue.length = 8; |
| 867 | var->blue.offset = 0; | 867 | var->blue.offset = 0; |
| 868 | var->blue.msb_right = 0; | 868 | var->blue.msb_right = 0; |
| 869 | 869 | ||
| 870 | var->transp.length = 0; | 870 | var->transp.length = 0; |
| 871 | var->transp.offset = 0; | 871 | var->transp.offset = 0; |
| 872 | var->transp.msb_right = 0; | 872 | var->transp.msb_right = 0; |
| 873 | break; | 873 | break; |
| 874 | case 32: | 874 | case 32: |
| 875 | var->red.length = 8; | 875 | var->red.length = 8; |
| 876 | var->red.offset = 16; | 876 | var->red.offset = 16; |
| 877 | var->red.msb_right = 0; | 877 | var->red.msb_right = 0; |
| 878 | 878 | ||
| 879 | var->green.length = 8; | 879 | var->green.length = 8; |
| 880 | var->green.offset = 8; | 880 | var->green.offset = 8; |
| 881 | var->green.msb_right = 0; | 881 | var->green.msb_right = 0; |
| 882 | 882 | ||
| 883 | var->blue.length = 8; | 883 | var->blue.length = 8; |
| 884 | var->blue.offset = 0; | 884 | var->blue.offset = 0; |
| 885 | var->blue.msb_right = 0; | 885 | var->blue.msb_right = 0; |
| 886 | 886 | ||
| 887 | var->transp.length = 8; | 887 | var->transp.length = 8; |
| 888 | var->transp.offset = 24; | 888 | var->transp.offset = 24; |
| 889 | var->transp.msb_right = 0; | 889 | var->transp.msb_right = 0; |
| 890 | break; | 890 | break; |
| 891 | } | 891 | } |
| 892 | 892 | ||
| 893 | if (var->pixclock < 1000) { | 893 | if (var->pixclock < 1000) { |
| 894 | htotal = var->xres + var->right_margin + var->hsync_len + | 894 | htotal = var->xres + var->right_margin + var->hsync_len + |
| 895 | var->left_margin; | 895 | var->left_margin; |
| 896 | vtotal = var->yres + var->lower_margin + var->vsync_len + | 896 | vtotal = var->yres + var->lower_margin + var->vsync_len + |
| 897 | var->upper_margin; | 897 | var->upper_margin; |
| 898 | var->pixclock = (vtotal * htotal * 6UL) / 100UL; | 898 | var->pixclock = (vtotal * htotal * 6UL) / 100UL; |
| 899 | var->pixclock = KHZ2PICOS(var->pixclock); | 899 | var->pixclock = KHZ2PICOS(var->pixclock); |
| 900 | dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n", | 900 | dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n", |
| 901 | var->pixclock); | 901 | var->pixclock); |
| 902 | } | 902 | } |
| 903 | 903 | ||
| 904 | var->height = -1; | 904 | var->height = -1; |
| 905 | var->width = -1; | 905 | var->width = -1; |
| 906 | var->grayscale = 0; | 906 | var->grayscale = 0; |
| 907 | 907 | ||
| 908 | /* Preserve sync flags */ | 908 | /* Preserve sync flags */ |
| 909 | var->sync |= mx3_fbi->sync; | 909 | var->sync |= mx3_fbi->sync; |
| 910 | mx3_fbi->sync |= var->sync; | 910 | mx3_fbi->sync |= var->sync; |
| 911 | 911 | ||
| 912 | return 0; | 912 | return 0; |
| 913 | } | 913 | } |
| 914 | 914 | ||
| 915 | static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf) | 915 | static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf) |
| 916 | { | 916 | { |
| 917 | chan &= 0xffff; | 917 | chan &= 0xffff; |
| 918 | chan >>= 16 - bf->length; | 918 | chan >>= 16 - bf->length; |
| 919 | return chan << bf->offset; | 919 | return chan << bf->offset; |
| 920 | } | 920 | } |
| 921 | 921 | ||
| 922 | static int mx3fb_setcolreg(unsigned int regno, unsigned int red, | 922 | static int mx3fb_setcolreg(unsigned int regno, unsigned int red, |
| 923 | unsigned int green, unsigned int blue, | 923 | unsigned int green, unsigned int blue, |
| 924 | unsigned int trans, struct fb_info *fbi) | 924 | unsigned int trans, struct fb_info *fbi) |
| 925 | { | 925 | { |
| 926 | struct mx3fb_info *mx3_fbi = fbi->par; | 926 | struct mx3fb_info *mx3_fbi = fbi->par; |
| 927 | u32 val; | 927 | u32 val; |
| 928 | int ret = 1; | 928 | int ret = 1; |
| 929 | 929 | ||
| 930 | dev_dbg(fbi->device, "%s\n", __func__); | 930 | dev_dbg(fbi->device, "%s\n", __func__); |
| 931 | 931 | ||
| 932 | mutex_lock(&mx3_fbi->mutex); | 932 | mutex_lock(&mx3_fbi->mutex); |
| 933 | /* | 933 | /* |
| 934 | * If greyscale is true, then we convert the RGB value | 934 | * If greyscale is true, then we convert the RGB value |
| 935 | * to greyscale no matter what visual we are using. | 935 | * to greyscale no matter what visual we are using. |
| 936 | */ | 936 | */ |
| 937 | if (fbi->var.grayscale) | 937 | if (fbi->var.grayscale) |
| 938 | red = green = blue = (19595 * red + 38470 * green + | 938 | red = green = blue = (19595 * red + 38470 * green + |
| 939 | 7471 * blue) >> 16; | 939 | 7471 * blue) >> 16; |
| 940 | switch (fbi->fix.visual) { | 940 | switch (fbi->fix.visual) { |
| 941 | case FB_VISUAL_TRUECOLOR: | 941 | case FB_VISUAL_TRUECOLOR: |
| 942 | /* | 942 | /* |
| 943 | * 16-bit True Colour. We encode the RGB value | 943 | * 16-bit True Colour. We encode the RGB value |
| 944 | * according to the RGB bitfield information. | 944 | * according to the RGB bitfield information. |
| 945 | */ | 945 | */ |
| 946 | if (regno < 16) { | 946 | if (regno < 16) { |
| 947 | u32 *pal = fbi->pseudo_palette; | 947 | u32 *pal = fbi->pseudo_palette; |
| 948 | 948 | ||
| 949 | val = chan_to_field(red, &fbi->var.red); | 949 | val = chan_to_field(red, &fbi->var.red); |
| 950 | val |= chan_to_field(green, &fbi->var.green); | 950 | val |= chan_to_field(green, &fbi->var.green); |
| 951 | val |= chan_to_field(blue, &fbi->var.blue); | 951 | val |= chan_to_field(blue, &fbi->var.blue); |
| 952 | 952 | ||
| 953 | pal[regno] = val; | 953 | pal[regno] = val; |
| 954 | 954 | ||
| 955 | ret = 0; | 955 | ret = 0; |
| 956 | } | 956 | } |
| 957 | break; | 957 | break; |
| 958 | 958 | ||
| 959 | case FB_VISUAL_STATIC_PSEUDOCOLOR: | 959 | case FB_VISUAL_STATIC_PSEUDOCOLOR: |
| 960 | case FB_VISUAL_PSEUDOCOLOR: | 960 | case FB_VISUAL_PSEUDOCOLOR: |
| 961 | break; | 961 | break; |
| 962 | } | 962 | } |
| 963 | mutex_unlock(&mx3_fbi->mutex); | 963 | mutex_unlock(&mx3_fbi->mutex); |
| 964 | 964 | ||
| 965 | return ret; | 965 | return ret; |
| 966 | } | 966 | } |
| 967 | 967 | ||
| 968 | /** | 968 | /** |
| @@ -970,152 +970,152 @@ static int mx3fb_setcolreg(unsigned int regno, unsigned int red, | |||
| 970 | */ | 970 | */ |
| 971 | static int mx3fb_blank(int blank, struct fb_info *fbi) | 971 | static int mx3fb_blank(int blank, struct fb_info *fbi) |
| 972 | { | 972 | { |
| 973 | struct mx3fb_info *mx3_fbi = fbi->par; | 973 | struct mx3fb_info *mx3_fbi = fbi->par; |
| 974 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; | 974 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; |
| 975 | 975 | ||
| 976 | dev_dbg(fbi->device, "%s\n", __func__); | 976 | dev_dbg(fbi->device, "%s\n", __func__); |
| 977 | 977 | ||
| 978 | dev_dbg(fbi->device, "blank = %d\n", blank); | 978 | dev_dbg(fbi->device, "blank = %d\n", blank); |
| 979 | 979 | ||
| 980 | if (mx3_fbi->blank == blank) | 980 | if (mx3_fbi->blank == blank) |
| 981 | return 0; | 981 | return 0; |
| 982 | 982 | ||
| 983 | mutex_lock(&mx3_fbi->mutex); | 983 | mutex_lock(&mx3_fbi->mutex); |
| 984 | mx3_fbi->blank = blank; | 984 | mx3_fbi->blank = blank; |
| 985 | 985 | ||
| 986 | switch (blank) { | 986 | switch (blank) { |
| 987 | case FB_BLANK_POWERDOWN: | 987 | case FB_BLANK_POWERDOWN: |
| 988 | case FB_BLANK_VSYNC_SUSPEND: | 988 | case FB_BLANK_VSYNC_SUSPEND: |
| 989 | case FB_BLANK_HSYNC_SUSPEND: | 989 | case FB_BLANK_HSYNC_SUSPEND: |
| 990 | case FB_BLANK_NORMAL: | 990 | case FB_BLANK_NORMAL: |
| 991 | sdc_disable_channel(mx3_fbi); | 991 | sdc_disable_channel(mx3_fbi); |
| 992 | sdc_set_brightness(mx3fb, 0); | 992 | sdc_set_brightness(mx3fb, 0); |
| 993 | break; | 993 | break; |
| 994 | case FB_BLANK_UNBLANK: | 994 | case FB_BLANK_UNBLANK: |
| 995 | sdc_enable_channel(mx3_fbi); | 995 | sdc_enable_channel(mx3_fbi); |
| 996 | sdc_set_brightness(mx3fb, mx3fb->backlight_level); | 996 | sdc_set_brightness(mx3fb, mx3fb->backlight_level); |
| 997 | break; | 997 | break; |
| 998 | } | 998 | } |
| 999 | mutex_unlock(&mx3_fbi->mutex); | 999 | mutex_unlock(&mx3_fbi->mutex); |
| 1000 | 1000 | ||
| 1001 | return 0; | 1001 | return 0; |
| 1002 | } | 1002 | } |
| 1003 | 1003 | ||
| 1004 | /** | 1004 | /** |
| 1005 | * mx3fb_pan_display() - pan or wrap the display | 1005 | * mx3fb_pan_display() - pan or wrap the display |
| 1006 | * @var: variable screen buffer information. | 1006 | * @var: variable screen buffer information. |
| 1007 | * @info: framebuffer information pointer. | 1007 | * @info: framebuffer information pointer. |
| 1008 | * | 1008 | * |
| 1009 | * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag | 1009 | * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag |
| 1010 | */ | 1010 | */ |
| 1011 | static int mx3fb_pan_display(struct fb_var_screeninfo *var, | 1011 | static int mx3fb_pan_display(struct fb_var_screeninfo *var, |
| 1012 | struct fb_info *fbi) | 1012 | struct fb_info *fbi) |
| 1013 | { | 1013 | { |
| 1014 | struct mx3fb_info *mx3_fbi = fbi->par; | 1014 | struct mx3fb_info *mx3_fbi = fbi->par; |
| 1015 | u32 y_bottom; | 1015 | u32 y_bottom; |
| 1016 | unsigned long base; | 1016 | unsigned long base; |
| 1017 | off_t offset; | 1017 | off_t offset; |
| 1018 | dma_cookie_t cookie; | 1018 | dma_cookie_t cookie; |
| 1019 | struct scatterlist *sg = mx3_fbi->sg; | 1019 | struct scatterlist *sg = mx3_fbi->sg; |
| 1020 | struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan; | 1020 | struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan; |
| 1021 | struct dma_async_tx_descriptor *txd; | 1021 | struct dma_async_tx_descriptor *txd; |
| 1022 | int ret; | 1022 | int ret; |
| 1023 | 1023 | ||
| 1024 | dev_dbg(fbi->device, "%s [%c]\n", __func__, | 1024 | dev_dbg(fbi->device, "%s [%c]\n", __func__, |
| 1025 | list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+'); | 1025 | list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+'); |
| 1026 | 1026 | ||
| 1027 | if (var->xoffset > 0) { | 1027 | if (var->xoffset > 0) { |
| 1028 | dev_dbg(fbi->device, "x panning not supported\n"); | 1028 | dev_dbg(fbi->device, "x panning not supported\n"); |
| 1029 | return -EINVAL; | 1029 | return -EINVAL; |
| 1030 | } | 1030 | } |
| 1031 | 1031 | ||
| 1032 | if (fbi->var.xoffset == var->xoffset && | 1032 | if (fbi->var.xoffset == var->xoffset && |
| 1033 | fbi->var.yoffset == var->yoffset) | 1033 | fbi->var.yoffset == var->yoffset) |
| 1034 | return 0; /* No change, do nothing */ | 1034 | return 0; /* No change, do nothing */ |
| 1035 | 1035 | ||
| 1036 | y_bottom = var->yoffset; | 1036 | y_bottom = var->yoffset; |
| 1037 | 1037 | ||
| 1038 | if (!(var->vmode & FB_VMODE_YWRAP)) | 1038 | if (!(var->vmode & FB_VMODE_YWRAP)) |
| 1039 | y_bottom += var->yres; | 1039 | y_bottom += var->yres; |
| 1040 | 1040 | ||
| 1041 | if (y_bottom > fbi->var.yres_virtual) | 1041 | if (y_bottom > fbi->var.yres_virtual) |
| 1042 | return -EINVAL; | 1042 | return -EINVAL; |
| 1043 | 1043 | ||
| 1044 | mutex_lock(&mx3_fbi->mutex); | 1044 | mutex_lock(&mx3_fbi->mutex); |
| 1045 | 1045 | ||
| 1046 | offset = (var->yoffset * var->xres_virtual + var->xoffset) * | 1046 | offset = (var->yoffset * var->xres_virtual + var->xoffset) * |
| 1047 | (var->bits_per_pixel / 8); | 1047 | (var->bits_per_pixel / 8); |
| 1048 | base = fbi->fix.smem_start + offset; | 1048 | base = fbi->fix.smem_start + offset; |
| 1049 | 1049 | ||
| 1050 | dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n", | 1050 | dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n", |
| 1051 | mx3_fbi->cur_ipu_buf, base); | 1051 | mx3_fbi->cur_ipu_buf, base); |
| 1052 | 1052 | ||
| 1053 | /* | 1053 | /* |
| 1054 | * We enable the End of Frame interrupt, which will free a tx-descriptor, | 1054 | * We enable the End of Frame interrupt, which will free a tx-descriptor, |
| 1055 | * which we will need for the next device_prep_slave_sg(). The | 1055 | * which we will need for the next device_prep_slave_sg(). The |
| 1056 | * IRQ-handler will disable the IRQ again. | 1056 | * IRQ-handler will disable the IRQ again. |
| 1057 | */ | 1057 | */ |
| 1058 | init_completion(&mx3_fbi->flip_cmpl); | 1058 | init_completion(&mx3_fbi->flip_cmpl); |
| 1059 | enable_irq(mx3_fbi->idmac_channel->eof_irq); | 1059 | enable_irq(mx3_fbi->idmac_channel->eof_irq); |
| 1060 | 1060 | ||
| 1061 | ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10); | 1061 | ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10); |
| 1062 | if (ret <= 0) { | 1062 | if (ret <= 0) { |
| 1063 | mutex_unlock(&mx3_fbi->mutex); | 1063 | mutex_unlock(&mx3_fbi->mutex); |
| 1064 | dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ? | 1064 | dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ? |
| 1065 | "user interrupt" : "timeout"); | 1065 | "user interrupt" : "timeout"); |
| 1066 | return ret ? : -ETIMEDOUT; | 1066 | return ret ? : -ETIMEDOUT; |
| 1067 | } | 1067 | } |
| 1068 | 1068 | ||
| 1069 | mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf; | 1069 | mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf; |
| 1070 | 1070 | ||
| 1071 | sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base; | 1071 | sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base; |
| 1072 | sg_set_page(&sg[mx3_fbi->cur_ipu_buf], | 1072 | sg_set_page(&sg[mx3_fbi->cur_ipu_buf], |
| 1073 | virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len, | 1073 | virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len, |
| 1074 | offset_in_page(fbi->screen_base + offset)); | 1074 | offset_in_page(fbi->screen_base + offset)); |
| 1075 | 1075 | ||
| 1076 | txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg + | 1076 | txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg + |
| 1077 | mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); | 1077 | mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); |
| 1078 | if (!txd) { | 1078 | if (!txd) { |
| 1079 | dev_err(fbi->device, | 1079 | dev_err(fbi->device, |
| 1080 | "Error preparing a DMA transaction descriptor.\n"); | 1080 | "Error preparing a DMA transaction descriptor.\n"); |
| 1081 | mutex_unlock(&mx3_fbi->mutex); | 1081 | mutex_unlock(&mx3_fbi->mutex); |
| 1082 | return -EIO; | 1082 | return -EIO; |
| 1083 | } | 1083 | } |
| 1084 | 1084 | ||
| 1085 | txd->callback_param = txd; | 1085 | txd->callback_param = txd; |
| 1086 | txd->callback = mx3fb_dma_done; | 1086 | txd->callback = mx3fb_dma_done; |
| 1087 | 1087 | ||
| 1088 | /* | 1088 | /* |
| 1089 | * Emulate original mx3fb behaviour: each new call to idmac_tx_submit() | 1089 | * Emulate original mx3fb behaviour: each new call to idmac_tx_submit() |
| 1090 | * should switch to another buffer | 1090 | * should switch to another buffer |
| 1091 | */ | 1091 | */ |
| 1092 | cookie = txd->tx_submit(txd); | 1092 | cookie = txd->tx_submit(txd); |
| 1093 | dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie); | 1093 | dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie); |
| 1094 | if (cookie < 0) { | 1094 | if (cookie < 0) { |
| 1095 | dev_err(fbi->device, | 1095 | dev_err(fbi->device, |
| 1096 | "Error updating SDC buf %d to address=0x%08lX\n", | 1096 | "Error updating SDC buf %d to address=0x%08lX\n", |
| 1097 | mx3_fbi->cur_ipu_buf, base); | 1097 | mx3_fbi->cur_ipu_buf, base); |
| 1098 | mutex_unlock(&mx3_fbi->mutex); | 1098 | mutex_unlock(&mx3_fbi->mutex); |
| 1099 | return -EIO; | 1099 | return -EIO; |
| 1100 | } | 1100 | } |
| 1101 | 1101 | ||
| 1102 | if (mx3_fbi->txd) | 1102 | if (mx3_fbi->txd) |
| 1103 | async_tx_ack(mx3_fbi->txd); | 1103 | async_tx_ack(mx3_fbi->txd); |
| 1104 | mx3_fbi->txd = txd; | 1104 | mx3_fbi->txd = txd; |
| 1105 | 1105 | ||
| 1106 | fbi->var.xoffset = var->xoffset; | 1106 | fbi->var.xoffset = var->xoffset; |
| 1107 | fbi->var.yoffset = var->yoffset; | 1107 | fbi->var.yoffset = var->yoffset; |
| 1108 | 1108 | ||
| 1109 | if (var->vmode & FB_VMODE_YWRAP) | 1109 | if (var->vmode & FB_VMODE_YWRAP) |
| 1110 | fbi->var.vmode |= FB_VMODE_YWRAP; | 1110 | fbi->var.vmode |= FB_VMODE_YWRAP; |
| 1111 | else | 1111 | else |
| 1112 | fbi->var.vmode &= ~FB_VMODE_YWRAP; | 1112 | fbi->var.vmode &= ~FB_VMODE_YWRAP; |
| 1113 | 1113 | ||
| 1114 | mutex_unlock(&mx3_fbi->mutex); | 1114 | mutex_unlock(&mx3_fbi->mutex); |
| 1115 | 1115 | ||
| 1116 | dev_dbg(fbi->device, "Update complete\n"); | 1116 | dev_dbg(fbi->device, "Update complete\n"); |
| 1117 | 1117 | ||
| 1118 | return 0; | 1118 | return 0; |
| 1119 | } | 1119 | } |
| 1120 | 1120 | ||
| 1121 | /* | 1121 | /* |
| @@ -1124,15 +1124,15 @@ static int mx3fb_pan_display(struct fb_var_screeninfo *var, | |||
| 1124 | * blitting, rectangle filling, copy regions and cursor definition. | 1124 | * blitting, rectangle filling, copy regions and cursor definition. |
| 1125 | */ | 1125 | */ |
| 1126 | static struct fb_ops mx3fb_ops = { | 1126 | static struct fb_ops mx3fb_ops = { |
| 1127 | .owner = THIS_MODULE, | 1127 | .owner = THIS_MODULE, |
| 1128 | .fb_set_par = mx3fb_set_par, | 1128 | .fb_set_par = mx3fb_set_par, |
| 1129 | .fb_check_var = mx3fb_check_var, | 1129 | .fb_check_var = mx3fb_check_var, |
| 1130 | .fb_setcolreg = mx3fb_setcolreg, | 1130 | .fb_setcolreg = mx3fb_setcolreg, |
| 1131 | .fb_pan_display = mx3fb_pan_display, | 1131 | .fb_pan_display = mx3fb_pan_display, |
| 1132 | .fb_fillrect = cfb_fillrect, | 1132 | .fb_fillrect = cfb_fillrect, |
| 1133 | .fb_copyarea = cfb_copyarea, | 1133 | .fb_copyarea = cfb_copyarea, |
| 1134 | .fb_imageblit = cfb_imageblit, | 1134 | .fb_imageblit = cfb_imageblit, |
| 1135 | .fb_blank = mx3fb_blank, | 1135 | .fb_blank = mx3fb_blank, |
| 1136 | }; | 1136 | }; |
| 1137 | 1137 | ||
| 1138 | #ifdef CONFIG_PM | 1138 | #ifdef CONFIG_PM |
| @@ -1146,19 +1146,19 @@ static struct fb_ops mx3fb_ops = { | |||
| 1146 | */ | 1146 | */ |
| 1147 | static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) | 1147 | static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) |
| 1148 | { | 1148 | { |
| 1149 | struct mx3fb_data *drv_data = platform_get_drvdata(pdev); | 1149 | struct mx3fb_data *drv_data = platform_get_drvdata(pdev); |
| 1150 | struct mx3fb_info *mx3_fbi = drv_data->fbi->par; | 1150 | struct mx3fb_info *mx3_fbi = drv_data->fbi->par; |
| 1151 | 1151 | ||
| 1152 | acquire_console_sem(); | 1152 | acquire_console_sem(); |
| 1153 | fb_set_suspend(drv_data->fbi, 1); | 1153 | fb_set_suspend(drv_data->fbi, 1); |
| 1154 | release_console_sem(); | 1154 | release_console_sem(); |
| 1155 | 1155 | ||
| 1156 | if (mx3_fbi->blank == FB_BLANK_UNBLANK) { | 1156 | if (mx3_fbi->blank == FB_BLANK_UNBLANK) { |
| 1157 | sdc_disable_channel(mx3_fbi); | 1157 | sdc_disable_channel(mx3_fbi); |
| 1158 | sdc_set_brightness(mx3fb, 0); | 1158 | sdc_set_brightness(mx3fb, 0); |
| 1159 | 1159 | ||
| 1160 | } | 1160 | } |
| 1161 | return 0; | 1161 | return 0; |
| 1162 | } | 1162 | } |
| 1163 | 1163 | ||
| 1164 | /* | 1164 | /* |
| @@ -1166,19 +1166,19 @@ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) | |||
| 1166 | */ | 1166 | */ |
| 1167 | static int mx3fb_resume(struct platform_device *pdev) | 1167 | static int mx3fb_resume(struct platform_device *pdev) |
| 1168 | { | 1168 | { |
| 1169 | struct mx3fb_data *drv_data = platform_get_drvdata(pdev); | 1169 | struct mx3fb_data *drv_data = platform_get_drvdata(pdev); |
| 1170 | struct mx3fb_info *mx3_fbi = drv_data->fbi->par; | 1170 | struct mx3fb_info *mx3_fbi = drv_data->fbi->par; |
| 1171 | 1171 | ||
| 1172 | if (mx3_fbi->blank == FB_BLANK_UNBLANK) { | 1172 | if (mx3_fbi->blank == FB_BLANK_UNBLANK) { |
| 1173 | sdc_enable_channel(mx3_fbi); | 1173 | sdc_enable_channel(mx3_fbi); |
| 1174 | sdc_set_brightness(mx3fb, drv_data->backlight_level); | 1174 | sdc_set_brightness(mx3fb, drv_data->backlight_level); |
| 1175 | } | 1175 | } |
| 1176 | 1176 | ||
| 1177 | acquire_console_sem(); | 1177 | acquire_console_sem(); |
| 1178 | fb_set_suspend(drv_data->fbi, 0); | 1178 | fb_set_suspend(drv_data->fbi, 0); |
| 1179 | release_console_sem(); | 1179 | release_console_sem(); |
| 1180 | 1180 | ||
| 1181 | return 0; | 1181 | return 0; |
| 1182 | } | 1182 | } |
| 1183 | #else | 1183 | #else |
| 1184 | #define mx3fb_suspend NULL | 1184 | #define mx3fb_suspend NULL |
| @@ -1191,8 +1191,8 @@ static int mx3fb_resume(struct platform_device *pdev) | |||
| 1191 | 1191 | ||
| 1192 | /** | 1192 | /** |
| 1193 | * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer. | 1193 | * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer. |
| 1194 | * @fbi: framebuffer information pointer | 1194 | * @fbi: framebuffer information pointer |
| 1195 | * @return: Error code indicating success or failure | 1195 | * @return: Error code indicating success or failure |
| 1196 | * | 1196 | * |
| 1197 | * This buffer is remapped into a non-cached, non-buffered, memory region to | 1197 | * This buffer is remapped into a non-cached, non-buffered, memory region to |
| 1198 | * allow palette and pixel writes to occur without flushing the cache. Once this | 1198 | * allow palette and pixel writes to occur without flushing the cache. Once this |
| @@ -1201,349 +1201,349 @@ static int mx3fb_resume(struct platform_device *pdev) | |||
| 1201 | */ | 1201 | */ |
| 1202 | static int mx3fb_map_video_memory(struct fb_info *fbi) | 1202 | static int mx3fb_map_video_memory(struct fb_info *fbi) |
| 1203 | { | 1203 | { |
| 1204 | int retval = 0; | 1204 | int retval = 0; |
| 1205 | dma_addr_t addr; | 1205 | dma_addr_t addr; |
| 1206 | 1206 | ||
| 1207 | fbi->screen_base = dma_alloc_writecombine(fbi->device, | 1207 | fbi->screen_base = dma_alloc_writecombine(fbi->device, |
| 1208 | fbi->fix.smem_len, | 1208 | fbi->fix.smem_len, |
| 1209 | &addr, GFP_DMA); | 1209 | &addr, GFP_DMA); |
| 1210 | 1210 | ||
| 1211 | if (!fbi->screen_base) { | 1211 | if (!fbi->screen_base) { |
| 1212 | dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n", | 1212 | dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n", |
| 1213 | fbi->fix.smem_len); | 1213 | fbi->fix.smem_len); |
| 1214 | retval = -EBUSY; | 1214 | retval = -EBUSY; |
| 1215 | goto err0; | 1215 | goto err0; |
| 1216 | } | 1216 | } |
| 1217 | 1217 | ||
| 1218 | fbi->fix.smem_start = addr; | 1218 | fbi->fix.smem_start = addr; |
| 1219 | 1219 | ||
| 1220 | dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n", | 1220 | dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n", |
| 1221 | (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len); | 1221 | (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len); |
| 1222 | 1222 | ||
| 1223 | fbi->screen_size = fbi->fix.smem_len; | 1223 | fbi->screen_size = fbi->fix.smem_len; |
| 1224 | 1224 | ||
| 1225 | /* Clear the screen */ | 1225 | /* Clear the screen */ |
| 1226 | memset((char *)fbi->screen_base, 0, fbi->fix.smem_len); | 1226 | memset((char *)fbi->screen_base, 0, fbi->fix.smem_len); |
| 1227 | 1227 | ||
| 1228 | return 0; | 1228 | return 0; |
| 1229 | 1229 | ||
| 1230 | err0: | 1230 | err0: |
| 1231 | fbi->fix.smem_len = 0; | 1231 | fbi->fix.smem_len = 0; |
| 1232 | fbi->fix.smem_start = 0; | 1232 | fbi->fix.smem_start = 0; |
| 1233 | fbi->screen_base = NULL; | 1233 | fbi->screen_base = NULL; |
| 1234 | return retval; | 1234 | return retval; |
| 1235 | } | 1235 | } |
| 1236 | 1236 | ||
| 1237 | /** | 1237 | /** |
| 1238 | * mx3fb_unmap_video_memory() - de-allocate frame buffer memory. | 1238 | * mx3fb_unmap_video_memory() - de-allocate frame buffer memory. |
| 1239 | * @fbi: framebuffer information pointer | 1239 | * @fbi: framebuffer information pointer |
| 1240 | * @return: error code indicating success or failure | 1240 | * @return: error code indicating success or failure |
| 1241 | */ | 1241 | */ |
| 1242 | static int mx3fb_unmap_video_memory(struct fb_info *fbi) | 1242 | static int mx3fb_unmap_video_memory(struct fb_info *fbi) |
| 1243 | { | 1243 | { |
| 1244 | dma_free_writecombine(fbi->device, fbi->fix.smem_len, | 1244 | dma_free_writecombine(fbi->device, fbi->fix.smem_len, |
| 1245 | fbi->screen_base, fbi->fix.smem_start); | 1245 | fbi->screen_base, fbi->fix.smem_start); |
| 1246 | 1246 | ||
| 1247 | fbi->screen_base = 0; | 1247 | fbi->screen_base = 0; |
| 1248 | fbi->fix.smem_start = 0; | 1248 | fbi->fix.smem_start = 0; |
| 1249 | fbi->fix.smem_len = 0; | 1249 | fbi->fix.smem_len = 0; |
| 1250 | return 0; | 1250 | return 0; |
| 1251 | } | 1251 | } |
| 1252 | 1252 | ||
| 1253 | /** | 1253 | /** |
| 1254 | * mx3fb_init_fbinfo() - initialize framebuffer information object. | 1254 | * mx3fb_init_fbinfo() - initialize framebuffer information object. |
| 1255 | * @return: initialized framebuffer structure. | 1255 | * @return: initialized framebuffer structure. |
| 1256 | */ | 1256 | */ |
| 1257 | static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops) | 1257 | static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops) |
| 1258 | { | 1258 | { |
| 1259 | struct fb_info *fbi; | 1259 | struct fb_info *fbi; |
| 1260 | struct mx3fb_info *mx3fbi; | 1260 | struct mx3fb_info *mx3fbi; |
| 1261 | int ret; | 1261 | int ret; |
| 1262 | 1262 | ||
| 1263 | /* Allocate sufficient memory for the fb structure */ | 1263 | /* Allocate sufficient memory for the fb structure */ |
| 1264 | fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev); | 1264 | fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev); |
| 1265 | if (!fbi) | 1265 | if (!fbi) |
| 1266 | return NULL; | 1266 | return NULL; |
| 1267 | 1267 | ||
| 1268 | mx3fbi = fbi->par; | 1268 | mx3fbi = fbi->par; |
| 1269 | mx3fbi->cookie = -EINVAL; | 1269 | mx3fbi->cookie = -EINVAL; |
| 1270 | mx3fbi->cur_ipu_buf = 0; | 1270 | mx3fbi->cur_ipu_buf = 0; |
| 1271 | 1271 | ||
| 1272 | fbi->var.activate = FB_ACTIVATE_NOW; | 1272 | fbi->var.activate = FB_ACTIVATE_NOW; |
| 1273 | 1273 | ||
| 1274 | fbi->fbops = ops; | 1274 | fbi->fbops = ops; |
| 1275 | fbi->flags = FBINFO_FLAG_DEFAULT; | 1275 | fbi->flags = FBINFO_FLAG_DEFAULT; |
| 1276 | fbi->pseudo_palette = mx3fbi->pseudo_palette; | 1276 | fbi->pseudo_palette = mx3fbi->pseudo_palette; |
| 1277 | 1277 | ||
| 1278 | mutex_init(&mx3fbi->mutex); | 1278 | mutex_init(&mx3fbi->mutex); |
| 1279 | 1279 | ||
| 1280 | /* Allocate colormap */ | 1280 | /* Allocate colormap */ |
| 1281 | ret = fb_alloc_cmap(&fbi->cmap, 16, 0); | 1281 | ret = fb_alloc_cmap(&fbi->cmap, 16, 0); |
| 1282 | if (ret < 0) { | 1282 | if (ret < 0) { |
| 1283 | framebuffer_release(fbi); | 1283 | framebuffer_release(fbi); |
| 1284 | return NULL; | 1284 | return NULL; |
| 1285 | } | 1285 | } |
| 1286 | 1286 | ||
| 1287 | return fbi; | 1287 | return fbi; |
| 1288 | } | 1288 | } |
| 1289 | 1289 | ||
| 1290 | static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan) | 1290 | static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan) |
| 1291 | { | 1291 | { |
| 1292 | struct device *dev = mx3fb->dev; | 1292 | struct device *dev = mx3fb->dev; |
| 1293 | struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data; | 1293 | struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data; |
| 1294 | const char *name = mx3fb_pdata->name; | 1294 | const char *name = mx3fb_pdata->name; |
| 1295 | unsigned int irq; | 1295 | unsigned int irq; |
| 1296 | struct fb_info *fbi; | 1296 | struct fb_info *fbi; |
| 1297 | struct mx3fb_info *mx3fbi; | 1297 | struct mx3fb_info *mx3fbi; |
| 1298 | const struct fb_videomode *mode; | 1298 | const struct fb_videomode *mode; |
| 1299 | int ret, num_modes; | 1299 | int ret, num_modes; |
| 1300 | 1300 | ||
| 1301 | ichan->client = mx3fb; | 1301 | ichan->client = mx3fb; |
| 1302 | irq = ichan->eof_irq; | 1302 | irq = ichan->eof_irq; |
| 1303 | 1303 | ||
| 1304 | if (ichan->dma_chan.chan_id != IDMAC_SDC_0) | 1304 | if (ichan->dma_chan.chan_id != IDMAC_SDC_0) |
| 1305 | return -EINVAL; | 1305 | return -EINVAL; |
| 1306 | 1306 | ||
| 1307 | fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops); | 1307 | fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops); |
| 1308 | if (!fbi) | 1308 | if (!fbi) |
| 1309 | return -ENOMEM; | 1309 | return -ENOMEM; |
| 1310 | 1310 | ||
| 1311 | if (!fb_mode) | 1311 | if (!fb_mode) |
| 1312 | fb_mode = name; | 1312 | fb_mode = name; |
| 1313 | 1313 | ||
| 1314 | if (!fb_mode) { | 1314 | if (!fb_mode) { |
| 1315 | ret = -EINVAL; | 1315 | ret = -EINVAL; |
| 1316 | goto emode; | 1316 | goto emode; |
| 1317 | } | 1317 | } |
| 1318 | 1318 | ||
| 1319 | if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) { | 1319 | if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) { |
| 1320 | mode = mx3fb_pdata->mode; | 1320 | mode = mx3fb_pdata->mode; |
| 1321 | num_modes = mx3fb_pdata->num_modes; | 1321 | num_modes = mx3fb_pdata->num_modes; |
| 1322 | } else { | 1322 | } else { |
| 1323 | mode = mx3fb_modedb; | 1323 | mode = mx3fb_modedb; |
| 1324 | num_modes = ARRAY_SIZE(mx3fb_modedb); | 1324 | num_modes = ARRAY_SIZE(mx3fb_modedb); |
| 1325 | } | 1325 | } |
| 1326 | 1326 | ||
| 1327 | if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode, | 1327 | if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode, |
| 1328 | num_modes, NULL, default_bpp)) { | 1328 | num_modes, NULL, default_bpp)) { |
| 1329 | ret = -EBUSY; | 1329 | ret = -EBUSY; |
| 1330 | goto emode; | 1330 | goto emode; |
| 1331 | } | 1331 | } |
| 1332 | 1332 | ||
| 1333 | fb_videomode_to_modelist(mode, num_modes, &fbi->modelist); | 1333 | fb_videomode_to_modelist(mode, num_modes, &fbi->modelist); |
| 1334 | 1334 | ||
| 1335 | /* Default Y virtual size is 2x panel size */ | 1335 | /* Default Y virtual size is 2x panel size */ |
| 1336 | fbi->var.yres_virtual = fbi->var.yres * 2; | 1336 | fbi->var.yres_virtual = fbi->var.yres * 2; |
| 1337 | 1337 | ||
| 1338 | mx3fb->fbi = fbi; | 1338 | mx3fb->fbi = fbi; |
| 1339 | 1339 | ||
| 1340 | /* set Display Interface clock period */ | 1340 | /* set Display Interface clock period */ |
| 1341 | mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER); | 1341 | mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER); |
| 1342 | /* Might need to trigger HSP clock change - see 44.3.3.8.5 */ | 1342 | /* Might need to trigger HSP clock change - see 44.3.3.8.5 */ |
| 1343 | 1343 | ||
| 1344 | sdc_set_brightness(mx3fb, 255); | 1344 | sdc_set_brightness(mx3fb, 255); |
| 1345 | sdc_set_global_alpha(mx3fb, true, 0xFF); | 1345 | sdc_set_global_alpha(mx3fb, true, 0xFF); |
| 1346 | sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0); | 1346 | sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0); |
| 1347 | 1347 | ||
| 1348 | mx3fbi = fbi->par; | 1348 | mx3fbi = fbi->par; |
| 1349 | mx3fbi->idmac_channel = ichan; | 1349 | mx3fbi->idmac_channel = ichan; |
| 1350 | mx3fbi->ipu_ch = ichan->dma_chan.chan_id; | 1350 | mx3fbi->ipu_ch = ichan->dma_chan.chan_id; |
| 1351 | mx3fbi->mx3fb = mx3fb; | 1351 | mx3fbi->mx3fb = mx3fb; |
| 1352 | mx3fbi->blank = FB_BLANK_NORMAL; | 1352 | mx3fbi->blank = FB_BLANK_NORMAL; |
| 1353 | 1353 | ||
| 1354 | init_completion(&mx3fbi->flip_cmpl); | 1354 | init_completion(&mx3fbi->flip_cmpl); |
| 1355 | disable_irq(ichan->eof_irq); | 1355 | disable_irq(ichan->eof_irq); |
| 1356 | dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq); | 1356 | dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq); |
| 1357 | ret = mx3fb_set_par(fbi); | 1357 | ret = mx3fb_set_par(fbi); |
| 1358 | if (ret < 0) | 1358 | if (ret < 0) |
| 1359 | goto esetpar; | 1359 | goto esetpar; |
| 1360 | 1360 | ||
| 1361 | mx3fb_blank(FB_BLANK_UNBLANK, fbi); | 1361 | mx3fb_blank(FB_BLANK_UNBLANK, fbi); |
| 1362 | 1362 | ||
| 1363 | dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode); | 1363 | dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode); |
| 1364 | 1364 | ||
| 1365 | ret = register_framebuffer(fbi); | 1365 | ret = register_framebuffer(fbi); |
| 1366 | if (ret < 0) | 1366 | if (ret < 0) |
| 1367 | goto erfb; | 1367 | goto erfb; |
| 1368 | 1368 | ||
| 1369 | return 0; | 1369 | return 0; |
| 1370 | 1370 | ||
| 1371 | erfb: | 1371 | erfb: |
| 1372 | esetpar: | 1372 | esetpar: |
| 1373 | emode: | 1373 | emode: |
| 1374 | fb_dealloc_cmap(&fbi->cmap); | 1374 | fb_dealloc_cmap(&fbi->cmap); |
| 1375 | framebuffer_release(fbi); | 1375 | framebuffer_release(fbi); |
| 1376 | 1376 | ||
| 1377 | return ret; | 1377 | return ret; |
| 1378 | } | 1378 | } |
| 1379 | 1379 | ||
| 1380 | static bool chan_filter(struct dma_chan *chan, void *arg) | 1380 | static bool chan_filter(struct dma_chan *chan, void *arg) |
| 1381 | { | 1381 | { |
| 1382 | struct dma_chan_request *rq = arg; | 1382 | struct dma_chan_request *rq = arg; |
| 1383 | struct device *dev; | 1383 | struct device *dev; |
| 1384 | struct mx3fb_platform_data *mx3fb_pdata; | 1384 | struct mx3fb_platform_data *mx3fb_pdata; |
| 1385 | 1385 | ||
| 1386 | if (!rq) | 1386 | if (!rq) |
| 1387 | return false; | 1387 | return false; |
| 1388 | 1388 | ||
| 1389 | dev = rq->mx3fb->dev; | 1389 | dev = rq->mx3fb->dev; |
| 1390 | mx3fb_pdata = dev->platform_data; | 1390 | mx3fb_pdata = dev->platform_data; |
| 1391 | 1391 | ||
| 1392 | return rq->id == chan->chan_id && | 1392 | return rq->id == chan->chan_id && |
| 1393 | mx3fb_pdata->dma_dev == chan->device->dev; | 1393 | mx3fb_pdata->dma_dev == chan->device->dev; |
| 1394 | } | 1394 | } |
| 1395 | 1395 | ||
| 1396 | static void release_fbi(struct fb_info *fbi) | 1396 | static void release_fbi(struct fb_info *fbi) |
| 1397 | { | 1397 | { |
| 1398 | mx3fb_unmap_video_memory(fbi); | 1398 | mx3fb_unmap_video_memory(fbi); |
| 1399 | 1399 | ||
| 1400 | fb_dealloc_cmap(&fbi->cmap); | 1400 | fb_dealloc_cmap(&fbi->cmap); |
| 1401 | 1401 | ||
| 1402 | unregister_framebuffer(fbi); | 1402 | unregister_framebuffer(fbi); |
| 1403 | framebuffer_release(fbi); | 1403 | framebuffer_release(fbi); |
| 1404 | } | 1404 | } |
| 1405 | 1405 | ||
| 1406 | static int mx3fb_probe(struct platform_device *pdev) | 1406 | static int mx3fb_probe(struct platform_device *pdev) |
| 1407 | { | 1407 | { |
| 1408 | struct device *dev = &pdev->dev; | 1408 | struct device *dev = &pdev->dev; |
| 1409 | int ret; | 1409 | int ret; |
| 1410 | struct resource *sdc_reg; | 1410 | struct resource *sdc_reg; |
| 1411 | struct mx3fb_data *mx3fb; | 1411 | struct mx3fb_data *mx3fb; |
| 1412 | dma_cap_mask_t mask; | 1412 | dma_cap_mask_t mask; |
| 1413 | struct dma_chan *chan; | 1413 | struct dma_chan *chan; |
| 1414 | struct dma_chan_request rq; | 1414 | struct dma_chan_request rq; |
| 1415 | 1415 | ||
| 1416 | /* | 1416 | /* |
| 1417 | * Display Interface (DI) and Synchronous Display Controller (SDC) | 1417 | * Display Interface (DI) and Synchronous Display Controller (SDC) |
| 1418 | * registers | 1418 | * registers |
| 1419 | */ | 1419 | */ |
| 1420 | sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 1420 | sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 1421 | if (!sdc_reg) | 1421 | if (!sdc_reg) |
| 1422 | return -EINVAL; | 1422 | return -EINVAL; |
| 1423 | 1423 | ||
| 1424 | mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL); | 1424 | mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL); |
| 1425 | if (!mx3fb) | 1425 | if (!mx3fb) |
| 1426 | return -ENOMEM; | 1426 | return -ENOMEM; |
| 1427 | 1427 | ||
| 1428 | spin_lock_init(&mx3fb->lock); | 1428 | spin_lock_init(&mx3fb->lock); |
| 1429 | 1429 | ||
| 1430 | mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg)); | 1430 | mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg)); |
| 1431 | if (!mx3fb->reg_base) { | 1431 | if (!mx3fb->reg_base) { |
| 1432 | ret = -ENOMEM; | 1432 | ret = -ENOMEM; |
| 1433 | goto eremap; | 1433 | goto eremap; |
| 1434 | } | 1434 | } |
| 1435 | 1435 | ||
| 1436 | pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end, | 1436 | pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end, |
| 1437 | mx3fb->reg_base); | 1437 | mx3fb->reg_base); |
| 1438 | 1438 | ||
| 1439 | /* IDMAC interface */ | 1439 | /* IDMAC interface */ |
| 1440 | dmaengine_get(); | 1440 | dmaengine_get(); |
| 1441 | 1441 | ||
| 1442 | mx3fb->dev = dev; | 1442 | mx3fb->dev = dev; |
| 1443 | platform_set_drvdata(pdev, mx3fb); | 1443 | platform_set_drvdata(pdev, mx3fb); |
| 1444 | 1444 | ||
| 1445 | rq.mx3fb = mx3fb; | 1445 | rq.mx3fb = mx3fb; |
| 1446 | 1446 | ||
| 1447 | dma_cap_zero(mask); | 1447 | dma_cap_zero(mask); |
| 1448 | dma_cap_set(DMA_SLAVE, mask); | 1448 | dma_cap_set(DMA_SLAVE, mask); |
| 1449 | dma_cap_set(DMA_PRIVATE, mask); | 1449 | dma_cap_set(DMA_PRIVATE, mask); |
| 1450 | rq.id = IDMAC_SDC_0; | 1450 | rq.id = IDMAC_SDC_0; |
| 1451 | chan = dma_request_channel(mask, chan_filter, &rq); | 1451 | chan = dma_request_channel(mask, chan_filter, &rq); |
| 1452 | if (!chan) { | 1452 | if (!chan) { |
| 1453 | ret = -EBUSY; | 1453 | ret = -EBUSY; |
| 1454 | goto ersdc0; | 1454 | goto ersdc0; |
| 1455 | } | 1455 | } |
| 1456 | 1456 | ||
| 1457 | ret = init_fb_chan(mx3fb, to_idmac_chan(chan)); | 1457 | ret = init_fb_chan(mx3fb, to_idmac_chan(chan)); |
| 1458 | if (ret < 0) | 1458 | if (ret < 0) |
| 1459 | goto eisdc0; | 1459 | goto eisdc0; |
| 1460 | 1460 | ||
| 1461 | mx3fb->backlight_level = 255; | 1461 | mx3fb->backlight_level = 255; |
| 1462 | 1462 | ||
| 1463 | return 0; | 1463 | return 0; |
| 1464 | 1464 | ||
| 1465 | eisdc0: | 1465 | eisdc0: |
| 1466 | dma_release_channel(chan); | 1466 | dma_release_channel(chan); |
| 1467 | ersdc0: | 1467 | ersdc0: |
| 1468 | dmaengine_put(); | 1468 | dmaengine_put(); |
| 1469 | iounmap(mx3fb->reg_base); | 1469 | iounmap(mx3fb->reg_base); |
| 1470 | eremap: | 1470 | eremap: |
| 1471 | kfree(mx3fb); | 1471 | kfree(mx3fb); |
| 1472 | dev_err(dev, "mx3fb: failed to register fb\n"); | 1472 | dev_err(dev, "mx3fb: failed to register fb\n"); |
| 1473 | return ret; | 1473 | return ret; |
| 1474 | } | 1474 | } |
| 1475 | 1475 | ||
| 1476 | static int mx3fb_remove(struct platform_device *dev) | 1476 | static int mx3fb_remove(struct platform_device *dev) |
| 1477 | { | 1477 | { |
| 1478 | struct mx3fb_data *mx3fb = platform_get_drvdata(dev); | 1478 | struct mx3fb_data *mx3fb = platform_get_drvdata(dev); |
| 1479 | struct fb_info *fbi = mx3fb->fbi; | 1479 | struct fb_info *fbi = mx3fb->fbi; |
| 1480 | struct mx3fb_info *mx3_fbi = fbi->par; | 1480 | struct mx3fb_info *mx3_fbi = fbi->par; |
| 1481 | struct dma_chan *chan; | 1481 | struct dma_chan *chan; |
| 1482 | 1482 | ||
| 1483 | chan = &mx3_fbi->idmac_channel->dma_chan; | 1483 | chan = &mx3_fbi->idmac_channel->dma_chan; |
| 1484 | release_fbi(fbi); | 1484 | release_fbi(fbi); |
| 1485 | 1485 | ||
| 1486 | dma_release_channel(chan); | 1486 | dma_release_channel(chan); |
| 1487 | dmaengine_put(); | 1487 | dmaengine_put(); |
| 1488 | 1488 | ||
| 1489 | iounmap(mx3fb->reg_base); | 1489 | iounmap(mx3fb->reg_base); |
| 1490 | kfree(mx3fb); | 1490 | kfree(mx3fb); |
| 1491 | return 0; | 1491 | return 0; |
| 1492 | } | 1492 | } |
| 1493 | 1493 | ||
| 1494 | static struct platform_driver mx3fb_driver = { | 1494 | static struct platform_driver mx3fb_driver = { |
| 1495 | .driver = { | 1495 | .driver = { |
| 1496 | .name = MX3FB_NAME, | 1496 | .name = MX3FB_NAME, |
| 1497 | }, | 1497 | }, |
| 1498 | .probe = mx3fb_probe, | 1498 | .probe = mx3fb_probe, |
| 1499 | .remove = mx3fb_remove, | 1499 | .remove = mx3fb_remove, |
| 1500 | .suspend = mx3fb_suspend, | 1500 | .suspend = mx3fb_suspend, |
| 1501 | .resume = mx3fb_resume, | 1501 | .resume = mx3fb_resume, |
| 1502 | }; | 1502 | }; |
| 1503 | 1503 | ||
| 1504 | /* | 1504 | /* |
| 1505 | * Parse user specified options (`video=mx3fb:') | 1505 | * Parse user specified options (`video=mx3fb:') |
| 1506 | * example: | 1506 | * example: |
| 1507 | * video=mx3fb:bpp=16 | 1507 | * video=mx3fb:bpp=16 |
| 1508 | */ | 1508 | */ |
| 1509 | static int mx3fb_setup(void) | 1509 | static int mx3fb_setup(void) |
| 1510 | { | 1510 | { |
| 1511 | #ifndef MODULE | 1511 | #ifndef MODULE |
| 1512 | char *opt, *options = NULL; | 1512 | char *opt, *options = NULL; |
| 1513 | 1513 | ||
| 1514 | if (fb_get_options("mx3fb", &options)) | 1514 | if (fb_get_options("mx3fb", &options)) |
| 1515 | return -ENODEV; | 1515 | return -ENODEV; |
| 1516 | 1516 | ||
| 1517 | if (!options || !*options) | 1517 | if (!options || !*options) |
| 1518 | return 0; | 1518 | return 0; |
| 1519 | 1519 | ||
| 1520 | while ((opt = strsep(&options, ",")) != NULL) { | 1520 | while ((opt = strsep(&options, ",")) != NULL) { |
| 1521 | if (!*opt) | 1521 | if (!*opt) |
| 1522 | continue; | 1522 | continue; |
| 1523 | if (!strncmp(opt, "bpp=", 4)) | 1523 | if (!strncmp(opt, "bpp=", 4)) |
| 1524 | default_bpp = simple_strtoul(opt + 4, NULL, 0); | 1524 | default_bpp = simple_strtoul(opt + 4, NULL, 0); |
| 1525 | else | 1525 | else |
| 1526 | fb_mode = opt; | 1526 | fb_mode = opt; |
| 1527 | } | 1527 | } |
| 1528 | #endif | 1528 | #endif |
| 1529 | 1529 | ||
| 1530 | return 0; | 1530 | return 0; |
| 1531 | } | 1531 | } |
| 1532 | 1532 | ||
| 1533 | static int __init mx3fb_init(void) | 1533 | static int __init mx3fb_init(void) |
| 1534 | { | 1534 | { |
| 1535 | int ret = mx3fb_setup(); | 1535 | int ret = mx3fb_setup(); |
| 1536 | 1536 | ||
| 1537 | if (ret < 0) | 1537 | if (ret < 0) |
| 1538 | return ret; | 1538 | return ret; |
| 1539 | 1539 | ||
| 1540 | ret = platform_driver_register(&mx3fb_driver); | 1540 | ret = platform_driver_register(&mx3fb_driver); |
| 1541 | return ret; | 1541 | return ret; |
| 1542 | } | 1542 | } |
| 1543 | 1543 | ||
| 1544 | static void __exit mx3fb_exit(void) | 1544 | static void __exit mx3fb_exit(void) |
| 1545 | { | 1545 | { |
| 1546 | platform_driver_unregister(&mx3fb_driver); | 1546 | platform_driver_unregister(&mx3fb_driver); |
| 1547 | } | 1547 | } |
| 1548 | 1548 | ||
| 1549 | module_init(mx3fb_init); | 1549 | module_init(mx3fb_init); |
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 2552b9f325ee..84f63205c46d 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c | |||
| @@ -59,7 +59,6 @@ | |||
| 59 | #include <asm/io.h> | 59 | #include <asm/io.h> |
| 60 | #include <asm/irq.h> | 60 | #include <asm/irq.h> |
| 61 | #include <asm/div64.h> | 61 | #include <asm/div64.h> |
| 62 | #include <mach/pxa-regs.h> | ||
| 63 | #include <mach/bitfield.h> | 62 | #include <mach/bitfield.h> |
| 64 | #include <mach/pxafb.h> | 63 | #include <mach/pxafb.h> |
| 65 | 64 | ||
| @@ -883,10 +882,21 @@ static void __devinit init_pxafb_overlay(struct pxafb_info *fbi, | |||
| 883 | init_completion(&ofb->branch_done); | 882 | init_completion(&ofb->branch_done); |
| 884 | } | 883 | } |
| 885 | 884 | ||
| 885 | static inline int pxafb_overlay_supported(void) | ||
| 886 | { | ||
| 887 | if (cpu_is_pxa27x() || cpu_is_pxa3xx()) | ||
| 888 | return 1; | ||
| 889 | |||
| 890 | return 0; | ||
| 891 | } | ||
| 892 | |||
| 886 | static int __devinit pxafb_overlay_init(struct pxafb_info *fbi) | 893 | static int __devinit pxafb_overlay_init(struct pxafb_info *fbi) |
| 887 | { | 894 | { |
| 888 | int i, ret; | 895 | int i, ret; |
| 889 | 896 | ||
| 897 | if (!pxafb_overlay_supported()) | ||
| 898 | return 0; | ||
| 899 | |||
| 890 | for (i = 0; i < 2; i++) { | 900 | for (i = 0; i < 2; i++) { |
| 891 | init_pxafb_overlay(fbi, &fbi->overlay[i], i); | 901 | init_pxafb_overlay(fbi, &fbi->overlay[i], i); |
| 892 | ret = register_framebuffer(&fbi->overlay[i].fb); | 902 | ret = register_framebuffer(&fbi->overlay[i].fb); |
| @@ -909,6 +919,9 @@ static void __devexit pxafb_overlay_exit(struct pxafb_info *fbi) | |||
| 909 | { | 919 | { |
| 910 | int i; | 920 | int i; |
| 911 | 921 | ||
| 922 | if (!pxafb_overlay_supported()) | ||
| 923 | return; | ||
| 924 | |||
| 912 | for (i = 0; i < 2; i++) | 925 | for (i = 0; i < 2; i++) |
| 913 | unregister_framebuffer(&fbi->overlay[i].fb); | 926 | unregister_framebuffer(&fbi->overlay[i].fb); |
| 914 | } | 927 | } |
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index 79cf0b1976aa..b0b4513ba537 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c | |||
| @@ -1017,6 +1017,10 @@ static int s3c2410fb_resume(struct platform_device *dev) | |||
| 1017 | 1017 | ||
| 1018 | s3c2410fb_init_registers(fbinfo); | 1018 | s3c2410fb_init_registers(fbinfo); |
| 1019 | 1019 | ||
| 1020 | /* re-activate our display after resume */ | ||
| 1021 | s3c2410fb_activate_var(fbinfo); | ||
| 1022 | s3c2410fb_blank(FB_BLANK_UNBLANK, fbinfo); | ||
| 1023 | |||
| 1020 | return 0; | 1024 | return 0; |
| 1021 | } | 1025 | } |
| 1022 | 1026 | ||
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index 076f946fa0f5..fad58cf9ef73 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c | |||
| @@ -176,9 +176,9 @@ | |||
| 176 | #include <linux/platform_device.h> | 176 | #include <linux/platform_device.h> |
| 177 | #include <linux/dma-mapping.h> | 177 | #include <linux/dma-mapping.h> |
| 178 | #include <linux/mutex.h> | 178 | #include <linux/mutex.h> |
| 179 | #include <linux/io.h> | ||
| 179 | 180 | ||
| 180 | #include <mach/hardware.h> | 181 | #include <mach/hardware.h> |
| 181 | #include <asm/io.h> | ||
| 182 | #include <asm/mach-types.h> | 182 | #include <asm/mach-types.h> |
| 183 | #include <mach/assabet.h> | 183 | #include <mach/assabet.h> |
| 184 | #include <mach/shannon.h> | 184 | #include <mach/shannon.h> |
| @@ -251,22 +251,6 @@ static struct sa1100fb_mach_info pal_info __initdata = { | |||
| 251 | #endif | 251 | #endif |
| 252 | #endif | 252 | #endif |
| 253 | 253 | ||
| 254 | #ifdef CONFIG_SA1100_H3800 | ||
| 255 | static struct sa1100fb_mach_info h3800_info __initdata = { | ||
| 256 | .pixclock = 174757, .bpp = 16, | ||
| 257 | .xres = 320, .yres = 240, | ||
| 258 | |||
| 259 | .hsync_len = 3, .vsync_len = 3, | ||
| 260 | .left_margin = 12, .upper_margin = 10, | ||
| 261 | .right_margin = 17, .lower_margin = 1, | ||
| 262 | |||
| 263 | .cmap_static = 1, | ||
| 264 | |||
| 265 | .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, | ||
| 266 | .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), | ||
| 267 | }; | ||
| 268 | #endif | ||
| 269 | |||
| 270 | #ifdef CONFIG_SA1100_H3600 | 254 | #ifdef CONFIG_SA1100_H3600 |
| 271 | static struct sa1100fb_mach_info h3600_info __initdata = { | 255 | static struct sa1100fb_mach_info h3600_info __initdata = { |
| 272 | .pixclock = 174757, .bpp = 16, | 256 | .pixclock = 174757, .bpp = 16, |
| @@ -432,11 +416,6 @@ sa1100fb_get_machine_info(struct sa1100fb_info *fbi) | |||
| 432 | fbi->rgb[RGB_16] = &h3600_rgb_16; | 416 | fbi->rgb[RGB_16] = &h3600_rgb_16; |
| 433 | } | 417 | } |
| 434 | #endif | 418 | #endif |
| 435 | #ifdef CONFIG_SA1100_H3800 | ||
| 436 | if (machine_is_h3800()) { | ||
| 437 | inf = &h3800_info; | ||
| 438 | } | ||
| 439 | #endif | ||
| 440 | #ifdef CONFIG_SA1100_COLLIE | 419 | #ifdef CONFIG_SA1100_COLLIE |
| 441 | if (machine_is_collie()) { | 420 | if (machine_is_collie()) { |
| 442 | inf = &collie_info; | 421 | inf = &collie_info; |
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c index b9d74d0b353e..65244c02551b 100644 --- a/drivers/w1/masters/mxc_w1.c +++ b/drivers/w1/masters/mxc_w1.c | |||
| @@ -116,7 +116,7 @@ static int __init mxc_w1_probe(struct platform_device *pdev) | |||
| 116 | if (!mdev) | 116 | if (!mdev) |
| 117 | return -ENOMEM; | 117 | return -ENOMEM; |
| 118 | 118 | ||
| 119 | mdev->clk = clk_get(&pdev->dev, "owire_clk"); | 119 | mdev->clk = clk_get(&pdev->dev, "owire"); |
| 120 | if (!mdev->clk) { | 120 | if (!mdev->clk) { |
| 121 | err = -ENODEV; | 121 | err = -ENODEV; |
| 122 | goto failed_clk; | 122 | goto failed_clk; |
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c index c973889110c8..a7e3b706b9d3 100644 --- a/drivers/w1/masters/omap_hdq.c +++ b/drivers/w1/masters/omap_hdq.c | |||
| @@ -590,8 +590,8 @@ static int __init omap_hdq_probe(struct platform_device *pdev) | |||
| 590 | } | 590 | } |
| 591 | 591 | ||
| 592 | /* get interface & functional clock objects */ | 592 | /* get interface & functional clock objects */ |
| 593 | hdq_data->hdq_ick = clk_get(&pdev->dev, "hdq_ick"); | 593 | hdq_data->hdq_ick = clk_get(&pdev->dev, "ick"); |
| 594 | hdq_data->hdq_fck = clk_get(&pdev->dev, "hdq_fck"); | 594 | hdq_data->hdq_fck = clk_get(&pdev->dev, "fck"); |
| 595 | 595 | ||
| 596 | if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) { | 596 | if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) { |
| 597 | dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n"); | 597 | dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n"); |
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 2f2ce7429f5b..aa5ad6e33f02 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c | |||
| @@ -60,9 +60,8 @@ struct omap_wdt_dev { | |||
| 60 | void __iomem *base; /* physical */ | 60 | void __iomem *base; /* physical */ |
| 61 | struct device *dev; | 61 | struct device *dev; |
| 62 | int omap_wdt_users; | 62 | int omap_wdt_users; |
| 63 | struct clk *armwdt_ck; | 63 | struct clk *ick; |
| 64 | struct clk *mpu_wdt_ick; | 64 | struct clk *fck; |
| 65 | struct clk *mpu_wdt_fck; | ||
| 66 | struct resource *mem; | 65 | struct resource *mem; |
| 67 | struct miscdevice omap_wdt_miscdev; | 66 | struct miscdevice omap_wdt_miscdev; |
| 68 | }; | 67 | }; |
| @@ -146,13 +145,8 @@ static int omap_wdt_open(struct inode *inode, struct file *file) | |||
| 146 | if (test_and_set_bit(1, (unsigned long *)&(wdev->omap_wdt_users))) | 145 | if (test_and_set_bit(1, (unsigned long *)&(wdev->omap_wdt_users))) |
| 147 | return -EBUSY; | 146 | return -EBUSY; |
| 148 | 147 | ||
| 149 | if (cpu_is_omap16xx()) | 148 | clk_enable(wdev->ick); /* Enable the interface clock */ |
| 150 | clk_enable(wdev->armwdt_ck); /* Enable the clock */ | 149 | clk_enable(wdev->fck); /* Enable the functional clock */ |
| 151 | |||
| 152 | if (cpu_is_omap24xx() || cpu_is_omap34xx()) { | ||
| 153 | clk_enable(wdev->mpu_wdt_ick); /* Enable the interface clock */ | ||
| 154 | clk_enable(wdev->mpu_wdt_fck); /* Enable the functional clock */ | ||
| 155 | } | ||
| 156 | 150 | ||
| 157 | /* initialize prescaler */ | 151 | /* initialize prescaler */ |
| 158 | while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x01) | 152 | while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x01) |
| @@ -181,13 +175,8 @@ static int omap_wdt_release(struct inode *inode, struct file *file) | |||
| 181 | 175 | ||
| 182 | omap_wdt_disable(wdev); | 176 | omap_wdt_disable(wdev); |
| 183 | 177 | ||
| 184 | if (cpu_is_omap16xx()) | 178 | clk_disable(wdev->ick); |
| 185 | clk_disable(wdev->armwdt_ck); /* Disable the clock */ | 179 | clk_disable(wdev->fck); |
| 186 | |||
| 187 | if (cpu_is_omap24xx() || cpu_is_omap34xx()) { | ||
| 188 | clk_disable(wdev->mpu_wdt_ick); /* Disable the clock */ | ||
| 189 | clk_disable(wdev->mpu_wdt_fck); /* Disable the clock */ | ||
| 190 | } | ||
| 191 | #else | 180 | #else |
| 192 | printk(KERN_CRIT "omap_wdt: Unexpected close, not stopping!\n"); | 181 | printk(KERN_CRIT "omap_wdt: Unexpected close, not stopping!\n"); |
| 193 | #endif | 182 | #endif |
| @@ -303,44 +292,19 @@ static int __init omap_wdt_probe(struct platform_device *pdev) | |||
| 303 | wdev->omap_wdt_users = 0; | 292 | wdev->omap_wdt_users = 0; |
| 304 | wdev->mem = mem; | 293 | wdev->mem = mem; |
| 305 | 294 | ||
| 306 | if (cpu_is_omap16xx()) { | 295 | wdev->ick = clk_get(&pdev->dev, "ick"); |
| 307 | wdev->armwdt_ck = clk_get(&pdev->dev, "armwdt_ck"); | 296 | if (IS_ERR(wdev->ick)) { |
| 308 | if (IS_ERR(wdev->armwdt_ck)) { | 297 | ret = PTR_ERR(wdev->ick); |
| 309 | ret = PTR_ERR(wdev->armwdt_ck); | 298 | wdev->ick = NULL; |
| 310 | wdev->armwdt_ck = NULL; | 299 | goto err_clk; |
| 311 | goto err_clk; | ||
| 312 | } | ||
| 313 | } | 300 | } |
| 314 | 301 | wdev->fck = clk_get(&pdev->dev, "fck"); | |
| 315 | if (cpu_is_omap24xx()) { | 302 | if (IS_ERR(wdev->fck)) { |
| 316 | wdev->mpu_wdt_ick = clk_get(&pdev->dev, "mpu_wdt_ick"); | 303 | ret = PTR_ERR(wdev->fck); |
| 317 | if (IS_ERR(wdev->mpu_wdt_ick)) { | 304 | wdev->fck = NULL; |
| 318 | ret = PTR_ERR(wdev->mpu_wdt_ick); | 305 | goto err_clk; |
| 319 | wdev->mpu_wdt_ick = NULL; | ||
| 320 | goto err_clk; | ||
| 321 | } | ||
| 322 | wdev->mpu_wdt_fck = clk_get(&pdev->dev, "mpu_wdt_fck"); | ||
| 323 | if (IS_ERR(wdev->mpu_wdt_fck)) { | ||
| 324 | ret = PTR_ERR(wdev->mpu_wdt_fck); | ||
| 325 | wdev->mpu_wdt_fck = NULL; | ||
| 326 | goto err_clk; | ||
| 327 | } | ||
| 328 | } | 306 | } |
| 329 | 307 | ||
| 330 | if (cpu_is_omap34xx()) { | ||
| 331 | wdev->mpu_wdt_ick = clk_get(&pdev->dev, "wdt2_ick"); | ||
| 332 | if (IS_ERR(wdev->mpu_wdt_ick)) { | ||
| 333 | ret = PTR_ERR(wdev->mpu_wdt_ick); | ||
| 334 | wdev->mpu_wdt_ick = NULL; | ||
| 335 | goto err_clk; | ||
| 336 | } | ||
| 337 | wdev->mpu_wdt_fck = clk_get(&pdev->dev, "wdt2_fck"); | ||
| 338 | if (IS_ERR(wdev->mpu_wdt_fck)) { | ||
| 339 | ret = PTR_ERR(wdev->mpu_wdt_fck); | ||
| 340 | wdev->mpu_wdt_fck = NULL; | ||
| 341 | goto err_clk; | ||
| 342 | } | ||
| 343 | } | ||
| 344 | wdev->base = ioremap(res->start, res->end - res->start + 1); | 308 | wdev->base = ioremap(res->start, res->end - res->start + 1); |
| 345 | if (!wdev->base) { | 309 | if (!wdev->base) { |
| 346 | ret = -ENOMEM; | 310 | ret = -ENOMEM; |
| @@ -380,12 +344,10 @@ err_ioremap: | |||
| 380 | wdev->base = NULL; | 344 | wdev->base = NULL; |
| 381 | 345 | ||
| 382 | err_clk: | 346 | err_clk: |
| 383 | if (wdev->armwdt_ck) | 347 | if (wdev->ick) |
| 384 | clk_put(wdev->armwdt_ck); | 348 | clk_put(wdev->ick); |
| 385 | if (wdev->mpu_wdt_ick) | 349 | if (wdev->fck) |
| 386 | clk_put(wdev->mpu_wdt_ick); | 350 | clk_put(wdev->fck); |
| 387 | if (wdev->mpu_wdt_fck) | ||
| 388 | clk_put(wdev->mpu_wdt_fck); | ||
| 389 | kfree(wdev); | 351 | kfree(wdev); |
| 390 | 352 | ||
| 391 | err_kzalloc: | 353 | err_kzalloc: |
| @@ -417,20 +379,8 @@ static int omap_wdt_remove(struct platform_device *pdev) | |||
| 417 | release_mem_region(res->start, res->end - res->start + 1); | 379 | release_mem_region(res->start, res->end - res->start + 1); |
| 418 | platform_set_drvdata(pdev, NULL); | 380 | platform_set_drvdata(pdev, NULL); |
| 419 | 381 | ||
| 420 | if (wdev->armwdt_ck) { | 382 | clk_put(wdev->ick); |
| 421 | clk_put(wdev->armwdt_ck); | 383 | clk_put(wdev->fck); |
| 422 | wdev->armwdt_ck = NULL; | ||
| 423 | } | ||
| 424 | |||
| 425 | if (wdev->mpu_wdt_ick) { | ||
| 426 | clk_put(wdev->mpu_wdt_ick); | ||
| 427 | wdev->mpu_wdt_ick = NULL; | ||
| 428 | } | ||
| 429 | |||
| 430 | if (wdev->mpu_wdt_fck) { | ||
| 431 | clk_put(wdev->mpu_wdt_fck); | ||
| 432 | wdev->mpu_wdt_fck = NULL; | ||
| 433 | } | ||
| 434 | iounmap(wdev->base); | 384 | iounmap(wdev->base); |
| 435 | 385 | ||
| 436 | kfree(wdev); | 386 | kfree(wdev); |
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index 5bd782f27837..ee1caae4d33b 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c | |||
| @@ -30,7 +30,7 @@ | |||
| 30 | #include <linux/timex.h> | 30 | #include <linux/timex.h> |
| 31 | 31 | ||
| 32 | #ifdef CONFIG_ARCH_PXA | 32 | #ifdef CONFIG_ARCH_PXA |
| 33 | #include <mach/pxa-regs.h> | 33 | #include <mach/regs-ost.h> |
| 34 | #endif | 34 | #endif |
| 35 | 35 | ||
| 36 | #include <mach/reset.h> | 36 | #include <mach/reset.h> |
