1 files changed, 55 insertions, 115 deletions

diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
index dad54e73147b..711cb11d6eb3 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/sstfb.c
@@ -17,7 +17,10 @@
  *      (port driver to new frambuffer infrastructure)
  * 01/2003 Helge Deller    <deller@gmx.de>
  *      (initial work on fb hardware acceleration for voodoo2)
- *
+ * 08/2006 Alan Cox        <alan@redhat.com>
+ *      Remove never finished and bogus 24/32bit support
+ *      Clean up macro abuse
+ *      Minor tidying for format.
  */
 
 /*
@@ -40,6 +43,7 @@
        through the fifo. warning: issuing a nop command seems to need pci_fifo
 -FIXME: in case of failure in the init sequence, be sure we return to a safe
         state.
+- FIXME: Use accelerator for 2D scroll
 -FIXME: 4MB boards have banked memory (FbiInit2 bits 1 & 20)
  */
 
@@ -67,9 +71,6 @@
 
 #undef SST_DEBUG
 
-/* enable 24/32 bpp functions ? (completely untested!) */
-#undef EN_24_32_BPP
-
 /*
   Default video mode .
   0 800x600@60  took from glide
@@ -377,7 +378,11 @@ static void sstfb_clear_screen(struct fb_info *info)
  *      sstfb_check_var - Optional function.  Validates a var passed in.
  *      @var: frame buffer variable screen structure
  *      @info: frame buffer structure that represents a single frame buffer
+ *
+ *      Limit to the abilities of a single chip as SLI is not supported
+ *      by this driver.
  */
+
 static int sstfb_check_var(struct fb_var_screeninfo *var,
                 struct fb_info *info)
 {
@@ -390,7 +395,7 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
         unsigned int freq;
 
         if (sst_calc_pll(PICOS2KHZ(var->pixclock), &freq, &par->pll)) {
-                eprintk("Pixclock at %ld KHZ out of range\n",
+                printk(KERN_ERR "sstfb: Pixclock at %ld KHZ out of range\n",
                                 PICOS2KHZ(var->pixclock));
                 return -EINVAL;
         }
@@ -409,27 +414,15 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
         case 0 ... 16 :
                 var->bits_per_pixel = 16;
                 break;
-#ifdef EN_24_32_BPP
-        case 17 ... 24 :
-                var->bits_per_pixel = 24;
-                break;
-        case 25 ... 32 :
-                var->bits_per_pixel = 32;
-                break;
-#endif
         default :
-                eprintk("Unsupported bpp %d\n", var->bits_per_pixel);
+                printk(KERN_ERR "sstfb: Unsupported bpp %d\n", var->bits_per_pixel);
                 return -EINVAL;
         }
         
         /* validity tests */
-        if ((var->xres <= 1) || (yDim <= 0 )
-           || (var->hsync_len <= 1)
-           || (hSyncOff <= 1)
-           || (var->left_margin <= 2)
-           || (vSyncOn <= 0)
-           || (vSyncOff <= 0)
-           || (vBackPorch <= 0)) {
+        if (var->xres <= 1 || yDim <= 0 || var->hsync_len <= 1  ||
+            hSyncOff <= 1  || var->left_margin <= 2  || vSyncOn <= 0 ||
+            vSyncOff <= 0 || vBackPorch <= 0) {
                 return -EINVAL;
         }
 
@@ -437,21 +430,17 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
                 /* Voodoo 2 limits */
                 tiles_in_X = (var->xres + 63 ) / 64 * 2;                
 
-                if (((var->xres - 1) >= POW2(11)) || (yDim >= POW2(11))) {
-                        eprintk("Unsupported resolution %dx%d\n",
+                if (var->xres  > POW2(11) || yDim >= POW2(11)) {
+                        printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n",
                                  var->xres, var->yres);
                         return -EINVAL;
                 }
 
-                if (((var->hsync_len-1) >= POW2(9))
-                   || ((hSyncOff-1) >= POW2(11))
-                   || ((var->left_margin - 2) >= POW2(9))
-                   || (vSyncOn >= POW2(13))
-                   || (vSyncOff >= POW2(13))
-                   || (vBackPorch >= POW2(9))
-                   || (tiles_in_X >= POW2(6))
-                   || (tiles_in_X <= 0)) {
-                        eprintk("Unsupported Timings\n");
+                if (var->hsync_len > POW2(9) || hSyncOff > POW2(11) ||
+                    var->left_margin - 2 >= POW2(9) || vSyncOn >= POW2(13) ||
+                    vSyncOff >= POW2(13) || vBackPorch >= POW2(9) ||
+                    tiles_in_X >= POW2(6) || tiles_in_X <= 0) {
+                        printk(KERN_ERR "sstfb: Unsupported timings\n");
                         return -EINVAL;
                 }
         } else {
@@ -459,24 +448,20 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
                 tiles_in_X = (var->xres + 63 ) / 64;
 
                 if (var->vmode) {
-                        eprintk("Interlace/Doublescan not supported %#x\n",
+                        printk(KERN_ERR "sstfb: Interlace/doublescan not supported %#x\n",
                                 var->vmode);
                         return -EINVAL;
                 }
-                if (((var->xres - 1) >= POW2(10)) || (var->yres >= POW2(10))) {
-                        eprintk("Unsupported resolution %dx%d\n",
+                if (var->xres > POW2(10) || var->yres >= POW2(10)) {
+                        printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n",
                                  var->xres, var->yres);
                         return -EINVAL;
                 }
-                if (((var->hsync_len - 1) >= POW2(8))
-                   || ((hSyncOff-1) >= POW2(10))
-                   || ((var->left_margin - 2) >= POW2(8))
-                   || (vSyncOn >= POW2(12))
-                   || (vSyncOff >= POW2(12))
-                   || (vBackPorch >= POW2(8))
-                   || (tiles_in_X >= POW2(4))
-                   || (tiles_in_X <= 0)) {
-                        eprintk("Unsupported Timings\n");
+                if (var->hsync_len > POW2(8) || hSyncOff - 1 > POW2(10) ||
+                    var->left_margin - 2 >= POW2(8) || vSyncOn >= POW2(12) ||
+                    vSyncOff >= POW2(12) || vBackPorch >= POW2(8) ||
+                    tiles_in_X >= POW2(4) || tiles_in_X <= 0) {
+                        printk(KERN_ERR "sstfb: Unsupported timings\n");
                         return -EINVAL;
                 }
         }
@@ -486,8 +471,8 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
         real_length = tiles_in_X  * (IS_VOODOO2(par) ? 32 : 64 )
                       * ((var->bits_per_pixel == 16) ? 2 : 4);
 
-        if ((real_length * yDim) > info->fix.smem_len) {
-                eprintk("Not enough video memory\n");
+        if (real_length * yDim > info->fix.smem_len) {
+                printk(KERN_ERR "sstfb: Not enough video memory\n");
                 return -ENOMEM;
         }
 
@@ -515,20 +500,6 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
                 var->blue.offset   = 0;
                 var->transp.offset = 0;
                 break;
-#ifdef EN_24_32_BPP
-        case 24:        /* RGB 888 LfbMode 4 */
-        case 32:        /* ARGB 8888 LfbMode 5 */
-                var->red.length    = 8;
-                var->green.length  = 8;
-                var->blue.length   = 8;
-                var->transp.length = 0;
-
-                var->red.offset    = 16;
-                var->green.offset  = 8;
-                var->blue.offset   = 0;
-                var->transp.offset = 0; /* in 24bpp we fake a 32 bpp mode */
-                break;
-#endif
         default:
                 return -EINVAL;
         }
@@ -653,13 +624,6 @@ static int sstfb_set_par(struct fb_info *info)
         case 16:
                 fbiinit1 |=  SEL_SOURCE_VCLK_2X_SEL;
                 break;
-#ifdef EN_24_32_BPP
-        case 24:
-        case 32:
-                /* sst_set_bits(FBIINIT1, SEL_SOURCE_VCLK_2X_DIV2 | EN_24BPP);*/
-                fbiinit1 |= SEL_SOURCE_VCLK_2X_SEL | EN_24BPP;
-                break;
-#endif
         default:
                 return -EINVAL;
         }
@@ -690,14 +654,6 @@ static int sstfb_set_par(struct fb_info *info)
         case 16:
                 lfbmode = LFB_565;
                 break;
-#ifdef EN_24_32_BPP
-        case 24:
-                lfbmode = LFB_888;
-                break;
-        case 32:
-                lfbmode = LFB_8888;
-                break;
-#endif
         default:
                 return -EINVAL;
         }
@@ -789,8 +745,7 @@ static int sstfb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
                         return -EFAULT;
                 if (val > info->fix.smem_len)
                         val = info->fix.smem_len;
-                printk("filling %#x \n", val);
-                for (p=0 ; p<val; p+=2)
+                for (p = 0 ; p < val; p += 2)
                         writew(p >> 6, info->screen_base + p);
                 return 0;
                 
@@ -802,13 +757,10 @@ static int sstfb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
                 pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
                                        tmp | PCI_EN_INIT_WR );
                 fbiinit0 = sst_read (FBIINIT0);
-                if (val) {
+                if (val)
                         sst_write(FBIINIT0, fbiinit0 & ~EN_VGA_PASSTHROUGH);
-                        iprintk("Disabling VGA pass-through\n");
-                } else {
+                else
                         sst_write(FBIINIT0, fbiinit0 | EN_VGA_PASSTHROUGH);
-                        iprintk("Enabling VGA pass-through\n");
-                }
                 pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp);
                 return 0;
                 
@@ -884,9 +836,9 @@ static int __devinit sst_get_memsize(struct fb_info *info, __u32 *memsize)
         u8 __iomem *fbbase_virt = info->screen_base;
 
         /* force memsize */
-        if ((mem >= 1 ) &&  (mem <= 4)) {
+        if (mem >= 1  && mem <= 4) {
                 *memsize = (mem * 0x100000);
-                iprintk("supplied memsize: %#x\n", *memsize);
+                printk(KERN_INFO "supplied memsize: %#x\n", *memsize);
                 return 1;
         }
 
@@ -927,7 +879,7 @@ static int __devinit sst_detect_att(struct fb_info *info)
         struct sstfb_par *par = info->par;
         int i, mir, dir;
 
-        for (i=0; i<3; i++) {
+        for (i = 0; i < 3; i++) {
                 sst_dac_write(DACREG_WMA, 0);   /* backdoor */
                 sst_dac_read(DACREG_RMR);       /* read 4 times RMR */
                 sst_dac_read(DACREG_RMR);
@@ -940,7 +892,7 @@ static int __devinit sst_detect_att(struct fb_info *info)
                 /*the 7th, device ID register */
                 dir = sst_dac_read(DACREG_RMR);
                 f_ddprintk("mir: %#x, dir: %#x\n", mir, dir);
-                if ((mir == DACREG_MIR_ATT ) && (dir == DACREG_DIR_ATT)) {
+                if (mir == DACREG_MIR_ATT && dir == DACREG_DIR_ATT) {
                         return 1;
                 }
         }
@@ -1134,12 +1086,6 @@ static void sst_set_vidmod_att_ti(struct fb_info *info, const int bpp)
         case 16:
                 sst_dac_write(DACREG_RMR, (cr0 & 0x0f) | DACREG_CR0_16BPP);
                 break;
-#ifdef EN_24_32_BPP
-        case 24:
-        case 32:
-                sst_dac_write(DACREG_RMR, (cr0 & 0x0f) | DACREG_CR0_24BPP);
-                break;
-#endif
         default:
                 dprintk("%s: bad depth '%u'\n", __FUNCTION__, bpp);
                 break;
@@ -1154,12 +1100,6 @@ static void sst_set_vidmod_ics(struct fb_info *info, const int bpp)
         case 16:
                 sst_dac_write(DACREG_ICS_CMD, DACREG_ICS_CMD_16BPP);
                 break;
-#ifdef EN_24_32_BPP
-        case 24:
-        case 32:
-                sst_dac_write(DACREG_ICS_CMD, DACREG_ICS_CMD_24BPP);
-                break;
-#endif
         default:
                 dprintk("%s: bad depth '%u'\n", __FUNCTION__, bpp);
                 break;
@@ -1250,7 +1190,7 @@ static int __devinit sst_init(struct fb_info *info, struct sstfb_par *par)
                                 PCI_EN_INIT_WR | PCI_REMAP_DAC );
         /* detect dac type */
         if (!sst_detect_dactype(info, par)) {
-                eprintk("Unknown dac type\n");
+                printk(KERN_ERR "sstfb: unknown dac type.\n");
                 //FIXME watch it: we are not in a safe state, bad bad bad.
                 return 0;
         }
@@ -1258,10 +1198,10 @@ static int __devinit sst_init(struct fb_info *info, struct sstfb_par *par)
         /* set graphic clock */
         par->gfx_clock = spec->default_gfx_clock;
         if ((gfxclk >10 ) && (gfxclk < spec->max_gfxclk)) {
-                iprintk("Using supplied graphic freq : %dMHz\n", gfxclk);
+                printk(KERN_INFO "sstfb: Using supplied graphic freq : %dMHz\n", gfxclk);
                  par->gfx_clock = gfxclk *1000;
         } else if (gfxclk) {
-                wprintk ("%dMhz is way out of spec! Using default\n", gfxclk);
+                printk(KERN_WARNING "sstfb: %dMhz is way out of spec! Using default\n", gfxclk);
         }
 
         sst_calc_pll(par->gfx_clock, &Fout, &gfx_timings);
@@ -1396,7 +1336,7 @@ static int __devinit sstfb_probe(struct pci_dev *pdev,
 
         /* Enable device in PCI config. */
         if ((err=pci_enable_device(pdev))) {
-                eprintk("cannot enable device\n");
+                printk(KERN_ERR "cannot enable device\n");
                 return err;
         }
 
@@ -1422,39 +1362,39 @@ static int __devinit sstfb_probe(struct pci_dev *pdev,
         fix->smem_start = fix->mmio_start + 0x400000;
 
         if (!request_mem_region(fix->mmio_start, fix->mmio_len, "sstfb MMIO")) {
-                eprintk("cannot reserve mmio memory\n");
+                printk(KERN_ERR "sstfb: cannot reserve mmio memory\n");
                 goto fail_mmio_mem;
         }
 
         if (!request_mem_region(fix->smem_start, 0x400000,"sstfb FB")) {
-                eprintk("cannot reserve fb memory\n");
+                printk(KERN_ERR "sstfb: cannot reserve fb memory\n");
                 goto fail_fb_mem;
         }
 
         par->mmio_vbase = ioremap_nocache(fix->mmio_start,
                                         fix->mmio_len);
         if (!par->mmio_vbase) {
-                eprintk("cannot remap register area %#lx\n",
+                printk(KERN_ERR "sstfb: cannot remap register area %#lx\n",
                         fix->mmio_start);
                 goto fail_mmio_remap;
         }
         info->screen_base = ioremap_nocache(fix->smem_start, 0x400000);
         if (!info->screen_base) {
-                eprintk("cannot remap framebuffer %#lx\n",
+                printk(KERN_ERR "sstfb: cannot remap framebuffer %#lx\n",
                         fix->smem_start);
                 goto fail_fb_remap;
         }
 
         if (!sst_init(info, par)) {
-                eprintk("Init failed\n");
+                printk(KERN_ERR "sstfb: Init failed\n");
                 goto fail;
         }
         sst_get_memsize(info, &fix->smem_len);
         strlcpy(fix->id, spec->name, sizeof(fix->id));
 
-        iprintk("%s (revision %d) with %s dac\n",
+        printk(KERN_INFO "%s (revision %d) with %s dac\n",
                 fix->id, par->revision, par->dac_sw.name);
-        iprintk("framebuffer at %#lx, mapped to 0x%p, size %dMB\n",
+        printk(KERN_INFO "framebuffer at %#lx, mapped to 0x%p, size %dMB\n",
                 fix->smem_start, info->screen_base,
                 fix->smem_len >> 20);
 
@@ -1471,24 +1411,25 @@ static int __devinit sstfb_probe(struct pci_dev *pdev,
         fix->accel      = FB_ACCEL_NONE;  /* FIXME */
         /*
          * According to the specs, the linelength must be of 1024 *pixels*
-         * and the 24bpp mode is in fact a 32 bpp mode.
+         * and the 24bpp mode is in fact a 32 bpp mode (and both are in
+         * fact dithered to 16bit).
          */
         fix->line_length = 2048; /* default value, for 24 or 32bit: 4096 */
         
         if ( mode_option &&
              fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16)) {
-                eprintk("can't set supplied video mode. Using default\n");
+                printk(KERN_ERR "sstfb: can't set supplied video mode. Using default\n");
                 info->var = sstfb_default;
         } else
                 info->var = sstfb_default;
 
         if (sstfb_check_var(&info->var, info)) {
-                eprintk("invalid default video mode.\n");
+                printk(KERN_ERR "sstfb: invalid default video mode.\n");
                 goto fail;
         }
 
         if (sstfb_set_par(info)) {
-                eprintk("can't set default video mode.\n");
+                printk(KERN_ERR "sstfb: can't set default video mode.\n");
                 goto fail;
         }
         
@@ -1497,7 +1438,7 @@ static int __devinit sstfb_probe(struct pci_dev *pdev,
         /* register fb */
         info->device = &pdev->dev;
         if (register_framebuffer(info) < 0) {
-                eprintk("can't register framebuffer.\n");
+                printk(KERN_ERR "sstfb: can't register framebuffer.\n");
                 goto fail;
         }
 
@@ -1711,4 +1652,3 @@ module_param(gfxclk, int, 0);
 MODULE_PARM_DESC(gfxclk, "Force graphic chip frequency in MHz. DANGEROUS. (default=auto)");
 module_param(slowpci, bool, 0);
 MODULE_PARM_DESC(slowpci, "Uses slow PCI settings (0 or 1) (default=0)");
-