7 files changed, 92 insertions, 34 deletions

diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index a4e4494663bf..0328da020a10 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -25,7 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/memory.h>
-#include <asm/plat-orion/mv_xor.h>
+#include <plat/mv_xor.h>
 #include "mv_xor.h"
 
 static void mv_xor_issue_pending(struct dma_chan *chan);
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 64002488c6ee..917cf8d3ae95 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -19,7 +19,7 @@
 #include <asm/io.h>
 #include <asm/sizes.h>
 #include <mach/hardware.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <plat/orion_nand.h>
 
 #ifdef CONFIG_MTD_CMDLINE_PARTS
 static const char *part_probes[] = { "cmdlinepart", NULL };
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index a8771ffc61e8..e07b5c51ec5b 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -23,12 +23,57 @@
 
 static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
-        skt->irq = IRQ_GPIO(GPIO_NR_PALMTX_PCMCIA_READY);
+        int ret;
+
+        ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1");
+        if (ret)
+                goto err1;
+        ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0);
+        if (ret)
+                goto err2;
+
+        ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2");
+        if (ret)
+                goto err2;
+        ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0);
+        if (ret)
+                goto err3;
+
+        ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST");
+        if (ret)
+                goto err3;
+        ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1);
+        if (ret)
+                goto err4;
+
+        ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY");
+        if (ret)
+                goto err4;
+        ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY);
+        if (ret)
+                goto err5;
+
+        skt->irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
         return 0;
+
+err5:
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+err4:
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+err3:
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+err2:
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
+err1:
+        return ret;
 }
 
 static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+        gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
 }
 
 static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
@@ -109,7 +154,7 @@ static void __exit palmtx_pcmcia_exit(void)
         platform_device_unregister(palmtx_pcmcia_device);
 }
 
-fs_initcall(palmtx_pcmcia_init);
+module_init(palmtx_pcmcia_init);
 module_exit(palmtx_pcmcia_exit);
 
 MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 3b4a14e355c1..77cb34270fc1 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -449,6 +449,7 @@ config SERIAL_CLPS711X_CONSOLE
 config SERIAL_SAMSUNG
         tristate "Samsung SoC serial support"
         depends on ARM && PLAT_S3C24XX
+        select SERIAL_CORE
         help
           Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
           providing /dev/ttySAC0, 1 and 2 (note, some machines may not
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 5fbdc14e63b3..5416cf969005 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -12,7 +12,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/mbus.h>
-#include <asm/plat-orion/ehci-orion.h>
+#include <plat/ehci-orion.h>
 
 #define rdl(off)        __raw_readl(hcd->regs + (off))
 #define wrl(off, val)   __raw_writel((val), hcd->regs + (off))
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index e7aa7ae8fca8..97204497d9f7 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1031,7 +1031,9 @@ static void pxafb_setup_gpio(struct pxafb_info *fbi)
         pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
         pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
         pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
-        pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
+
+        if ((lccr0 & LCCR0_PAS) == 0)
+                pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
 }
 
 static void pxafb_enable_controller(struct pxafb_info *fbi)
@@ -1400,6 +1402,8 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi,
         if (lcd_conn == LCD_MONO_STN_8BPP)
                 fbi->lccr0 |= LCCR0_DPD;
 
+        fbi->lccr0 |= (lcd_conn & LCD_ALTERNATE_MAPPING) ? LCCR0_LDDALT : 0;
+
         fbi->lccr3 = LCCR3_Acb((inf->lcd_conn >> 10) & 0xff);
         fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
         fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL)  ? LCCR3_PCP : 0;
@@ -1673,53 +1677,63 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
 #define pxafb_setup_options()           (0)
 #endif
 
-static int __devinit pxafb_probe(struct platform_device *dev)
-{
-        struct pxafb_info *fbi;
-        struct pxafb_mach_info *inf;
-        struct resource *r;
-        int irq, ret;
-
-        dev_dbg(&dev->dev, "pxafb_probe\n");
-
-        inf = dev->dev.platform_data;
-        ret = -ENOMEM;
-        fbi = NULL;
-        if (!inf)
-                goto failed;
-
-        ret = pxafb_parse_options(&dev->dev, g_options);
-        if (ret < 0)
-                goto failed;
-
 #ifdef DEBUG_VAR
-        /* Check for various illegal bit-combinations. Currently only
-         * a warning is given. */
+/* Check for various illegal bit-combinations. Currently only
+ * a warning is given. */
+static void __devinit pxafb_check_options(struct device *dev,
+                                          struct pxafb_mach_info *inf)
+{
+        if (inf->lcd_conn)
+                return;
 
         if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
-                dev_warn(&dev->dev, "machine LCCR0 setting contains "
+                dev_warn(dev, "machine LCCR0 setting contains "
                                 "illegal bits: %08x\n",
                         inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
         if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
-                dev_warn(&dev->dev, "machine LCCR3 setting contains "
+                dev_warn(dev, "machine LCCR3 setting contains "
                                 "illegal bits: %08x\n",
                         inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
         if (inf->lccr0 & LCCR0_DPD &&
             ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
              (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
              (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
-                dev_warn(&dev->dev, "Double Pixel Data (DPD) mode is "
+                dev_warn(dev, "Double Pixel Data (DPD) mode is "
                                 "only valid in passive mono"
                                 " single panel mode\n");
         if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
             (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
-                dev_warn(&dev->dev, "Dual panel only valid in passive mode\n");
+                dev_warn(dev, "Dual panel only valid in passive mode\n");
         if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
              (inf->modes->upper_margin || inf->modes->lower_margin))
-                dev_warn(&dev->dev, "Upper and lower margins must be 0 in "
+                dev_warn(dev, "Upper and lower margins must be 0 in "
                                 "passive mode\n");
+}
+#else
+#define pxafb_check_options(...)        do {} while (0)
 #endif
 
+static int __devinit pxafb_probe(struct platform_device *dev)
+{
+        struct pxafb_info *fbi;
+        struct pxafb_mach_info *inf;
+        struct resource *r;
+        int irq, ret;
+
+        dev_dbg(&dev->dev, "pxafb_probe\n");
+
+        inf = dev->dev.platform_data;
+        ret = -ENOMEM;
+        fbi = NULL;
+        if (!inf)
+                goto failed;
+
+        ret = pxafb_parse_options(&dev->dev, g_options);
+        if (ret < 0)
+                goto failed;
+
+        pxafb_check_options(&dev->dev, inf);
+
         dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",
                         inf->modes->xres,
                         inf->modes->yres,
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 3da2b90d2fe6..22715e3be5e7 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -157,8 +157,6 @@ static void s3c2410wdt_start(void)
         writel(wdt_count, wdt_base + S3C2410_WTCNT);
         writel(wtcon, wdt_base + S3C2410_WTCON);
         spin_unlock(&wdt_lock);
-
-        return 0;
 }
 
 static int s3c2410wdt_set_heartbeat(int timeout)