aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/Makefile2
-rw-r--r--drivers/base/power/main.c26
-rw-r--r--drivers/base/power/power.h13
-rw-r--r--drivers/base/power/runtime.c1
-rw-r--r--drivers/block/ub.c4
-rw-r--r--drivers/pci/quirks.c253
-rw-r--r--drivers/usb/Makefile2
-rw-r--r--drivers/usb/class/Kconfig23
-rw-r--r--drivers/usb/class/Makefile1
-rw-r--r--drivers/usb/class/bluetty.c1279
-rw-r--r--drivers/usb/class/cdc-acm.c5
-rw-r--r--drivers/usb/class/usblp.c3
-rw-r--r--drivers/usb/core/Kconfig11
-rw-r--r--drivers/usb/core/Makefile2
-rw-r--r--drivers/usb/core/config.c22
-rw-r--r--drivers/usb/core/devio.c190
-rw-r--r--drivers/usb/core/file.c19
-rw-r--r--drivers/usb/core/hcd-pci.c106
-rw-r--r--drivers/usb/core/hcd.c151
-rw-r--r--drivers/usb/core/hcd.h69
-rw-r--r--drivers/usb/core/hub.c410
-rw-r--r--drivers/usb/core/hub.h2
-rw-r--r--drivers/usb/core/inode.c44
-rw-r--r--drivers/usb/core/message.c88
-rw-r--r--drivers/usb/core/notify.c120
-rw-r--r--drivers/usb/core/sysfs.c319
-rw-r--r--drivers/usb/core/urb.c3
-rw-r--r--drivers/usb/core/usb.c165
-rw-r--r--drivers/usb/core/usb.h33
-rw-r--r--drivers/usb/gadget/dummy_hcd.c24
-rw-r--r--drivers/usb/gadget/ether.c1
-rw-r--r--drivers/usb/gadget/file_storage.c52
-rw-r--r--drivers/usb/gadget/goku_udc.c1
-rw-r--r--drivers/usb/gadget/lh7a40x_udc.c1
-rw-r--r--drivers/usb/gadget/net2280.c1
-rw-r--r--drivers/usb/gadget/omap_udc.c13
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.c1
-rw-r--r--drivers/usb/gadget/zero.c1
-rw-r--r--drivers/usb/host/Makefile5
-rw-r--r--drivers/usb/host/ehci-hcd.c543
-rw-r--r--drivers/usb/host/ehci-hub.c8
-rw-r--r--drivers/usb/host/ehci-pci.c415
-rw-r--r--drivers/usb/host/ehci.h1
-rw-r--r--drivers/usb/host/isp116x-hcd.c41
-rw-r--r--drivers/usb/host/isp116x.h1
-rw-r--r--drivers/usb/host/ohci-au1xxx.c6
-rw-r--r--drivers/usb/host/ohci-dbg.c4
-rw-r--r--drivers/usb/host/ohci-hcd.c4
-rw-r--r--drivers/usb/host/ohci-hub.c52
-rw-r--r--drivers/usb/host/ohci-lh7a404.c6
-rw-r--r--drivers/usb/host/ohci-mem.c1
-rw-r--r--drivers/usb/host/ohci-omap.c45
-rw-r--r--drivers/usb/host/ohci-pci.c47
-rw-r--r--drivers/usb/host/ohci-ppc-soc.c9
-rw-r--r--drivers/usb/host/ohci-pxa27x.c7
-rw-r--r--drivers/usb/host/ohci-s3c2410.c9
-rw-r--r--drivers/usb/host/ohci-sa1111.c7
-rw-r--r--drivers/usb/host/ohci.h1
-rw-r--r--drivers/usb/host/pci-quirks.c296
-rw-r--r--drivers/usb/host/sl811-hcd.c17
-rw-r--r--drivers/usb/host/uhci-debug.c5
-rw-r--r--drivers/usb/host/uhci-hcd.c178
-rw-r--r--drivers/usb/host/uhci-hcd.h98
-rw-r--r--drivers/usb/host/uhci-q.c62
-rw-r--r--drivers/usb/image/mdc800.c33
-rw-r--r--drivers/usb/image/microtek.c3
-rw-r--r--drivers/usb/input/aiptek.c2
-rw-r--r--drivers/usb/input/hid-core.c5
-rw-r--r--drivers/usb/input/hiddev.c3
-rw-r--r--drivers/usb/input/map_to_7segment.h2
-rw-r--r--drivers/usb/input/touchkitusb.c2
-rw-r--r--drivers/usb/media/dabusb.c3
-rw-r--r--drivers/usb/misc/auerswald.c3
-rw-r--r--drivers/usb/misc/idmouse.c5
-rw-r--r--drivers/usb/misc/legousbtower.c5
-rw-r--r--drivers/usb/misc/rio500.c3
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb.c7
-rw-r--r--drivers/usb/misc/usblcd.c9
-rw-r--r--drivers/usb/misc/usbtest.c11
-rw-r--r--drivers/usb/mon/mon_main.c23
-rw-r--r--drivers/usb/net/Kconfig2
-rw-r--r--drivers/usb/net/kaweth.c2
-rw-r--r--drivers/usb/net/pegasus.c2
-rw-r--r--drivers/usb/net/pegasus.h2
-rw-r--r--drivers/usb/net/rtl8150.c1
-rw-r--r--drivers/usb/net/usbnet.c2
-rw-r--r--drivers/usb/serial/ChangeLog.old730
-rw-r--r--drivers/usb/serial/Kconfig9
-rw-r--r--drivers/usb/serial/Makefile1
-rw-r--r--drivers/usb/serial/airprime.c8
-rw-r--r--drivers/usb/serial/belkin_sa.c10
-rw-r--r--drivers/usb/serial/bus.c37
-rw-r--r--drivers/usb/serial/cp2101.c10
-rw-r--r--drivers/usb/serial/cyberjack.c10
-rw-r--r--drivers/usb/serial/cypress_m8.c20
-rw-r--r--drivers/usb/serial/digi_acceleport.c20
-rw-r--r--drivers/usb/serial/empeg.c8
-rw-r--r--drivers/usb/serial/ftdi_sio.c16
-rw-r--r--drivers/usb/serial/ftdi_sio.h16
-rw-r--r--drivers/usb/serial/garmin_gps.c15
-rw-r--r--drivers/usb/serial/generic.c9
-rw-r--r--drivers/usb/serial/hp4x.c10
-rw-r--r--drivers/usb/serial/io_edgeport.c219
-rw-r--r--drivers/usb/serial/io_tables.h30
-rw-r--r--drivers/usb/serial/io_ti.c20
-rw-r--r--drivers/usb/serial/ipaq.c247
-rw-r--r--drivers/usb/serial/ipw.c10
-rw-r--r--drivers/usb/serial/ir-usb.c9
-rw-r--r--drivers/usb/serial/keyspan.h40
-rw-r--r--drivers/usb/serial/keyspan_pda.c30
-rw-r--r--drivers/usb/serial/kl5kusb105.c10
-rw-r--r--drivers/usb/serial/kobil_sct.c9
-rw-r--r--drivers/usb/serial/mct_u232.c10
-rw-r--r--drivers/usb/serial/nokia_dku2.c142
-rw-r--r--drivers/usb/serial/omninet.c10
-rw-r--r--drivers/usb/serial/option.c10
-rw-r--r--drivers/usb/serial/pl2303.c35
-rw-r--r--drivers/usb/serial/safe_serial.c10
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c18
-rw-r--r--drivers/usb/serial/usb-serial.c378
-rw-r--r--drivers/usb/serial/usb-serial.h81
-rw-r--r--drivers/usb/serial/visor.c170
-rw-r--r--drivers/usb/serial/whiteheat.c42
-rw-r--r--drivers/usb/storage/Kconfig3
-rw-r--r--drivers/usb/storage/shuttle_usbat.c314
-rw-r--r--drivers/usb/storage/shuttle_usbat.h66
-rw-r--r--drivers/usb/storage/transport.c6
-rw-r--r--drivers/usb/storage/transport.h2
-rw-r--r--drivers/usb/storage/unusual_devs.h44
-rw-r--r--drivers/usb/storage/usb.c163
-rw-r--r--drivers/usb/storage/usb.h5
-rw-r--r--drivers/usb/usb-skeleton.c3
132 files changed, 4027 insertions, 4497 deletions
diff --git a/drivers/Makefile b/drivers/Makefile
index 1a109a6dd953..65670be6ff1a 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -5,7 +5,7 @@
5# Rewritten to use lists instead of if-statements. 5# Rewritten to use lists instead of if-statements.
6# 6#
7 7
8obj-$(CONFIG_PCI) += pci/ 8obj-$(CONFIG_PCI) += pci/ usb/
9obj-$(CONFIG_PARISC) += parisc/ 9obj-$(CONFIG_PARISC) += parisc/
10obj-y += video/ 10obj-y += video/
11obj-$(CONFIG_ACPI) += acpi/ 11obj-$(CONFIG_ACPI) += acpi/
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 15e6a8f951f1..0d2e101e4f15 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -30,23 +30,6 @@ LIST_HEAD(dpm_off_irq);
30DECLARE_MUTEX(dpm_sem); 30DECLARE_MUTEX(dpm_sem);
31DECLARE_MUTEX(dpm_list_sem); 31DECLARE_MUTEX(dpm_list_sem);
32 32
33/*
34 * PM Reference Counting.
35 */
36
37static inline void device_pm_hold(struct device * dev)
38{
39 if (dev)
40 atomic_inc(&dev->power.pm_users);
41}
42
43static inline void device_pm_release(struct device * dev)
44{
45 if (dev)
46 atomic_dec(&dev->power.pm_users);
47}
48
49
50/** 33/**
51 * device_pm_set_parent - Specify power dependency. 34 * device_pm_set_parent - Specify power dependency.
52 * @dev: Device who needs power. 35 * @dev: Device who needs power.
@@ -62,10 +45,8 @@ static inline void device_pm_release(struct device * dev)
62 45
63void device_pm_set_parent(struct device * dev, struct device * parent) 46void device_pm_set_parent(struct device * dev, struct device * parent)
64{ 47{
65 struct device * old_parent = dev->power.pm_parent; 48 put_device(dev->power.pm_parent);
66 device_pm_release(old_parent); 49 dev->power.pm_parent = get_device(parent);
67 dev->power.pm_parent = parent;
68 device_pm_hold(parent);
69} 50}
70EXPORT_SYMBOL_GPL(device_pm_set_parent); 51EXPORT_SYMBOL_GPL(device_pm_set_parent);
71 52
@@ -75,7 +56,6 @@ int device_pm_add(struct device * dev)
75 56
76 pr_debug("PM: Adding info for %s:%s\n", 57 pr_debug("PM: Adding info for %s:%s\n",
77 dev->bus ? dev->bus->name : "No Bus", dev->kobj.name); 58 dev->bus ? dev->bus->name : "No Bus", dev->kobj.name);
78 atomic_set(&dev->power.pm_users, 0);
79 down(&dpm_list_sem); 59 down(&dpm_list_sem);
80 list_add_tail(&dev->power.entry, &dpm_active); 60 list_add_tail(&dev->power.entry, &dpm_active);
81 device_pm_set_parent(dev, dev->parent); 61 device_pm_set_parent(dev, dev->parent);
@@ -91,7 +71,7 @@ void device_pm_remove(struct device * dev)
91 dev->bus ? dev->bus->name : "No Bus", dev->kobj.name); 71 dev->bus ? dev->bus->name : "No Bus", dev->kobj.name);
92 down(&dpm_list_sem); 72 down(&dpm_list_sem);
93 dpm_sysfs_remove(dev); 73 dpm_sysfs_remove(dev);
94 device_pm_release(dev->power.pm_parent); 74 put_device(dev->power.pm_parent);
95 list_del_init(&dev->power.entry); 75 list_del_init(&dev->power.entry);
96 up(&dpm_list_sem); 76 up(&dpm_list_sem);
97} 77}
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index 2e700d795cf1..fb3d35a9e101 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -67,9 +67,6 @@ extern int suspend_device(struct device *, pm_message_t);
67 * runtime.c 67 * runtime.c
68 */ 68 */
69 69
70extern int dpm_runtime_suspend(struct device *, pm_message_t);
71extern void dpm_runtime_resume(struct device *);
72
73#else /* CONFIG_PM */ 70#else /* CONFIG_PM */
74 71
75 72
@@ -82,14 +79,4 @@ static inline void device_pm_remove(struct device * dev)
82 79
83} 80}
84 81
85static inline int dpm_runtime_suspend(struct device * dev, pm_message_t state)
86{
87 return 0;
88}
89
90static inline void dpm_runtime_resume(struct device * dev)
91{
92
93}
94
95#endif 82#endif
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index e8f0519f5dfa..adbc3148c039 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -36,6 +36,7 @@ void dpm_runtime_resume(struct device * dev)
36 runtime_resume(dev); 36 runtime_resume(dev);
37 up(&dpm_sem); 37 up(&dpm_sem);
38} 38}
39EXPORT_SYMBOL(dpm_runtime_resume);
39 40
40 41
41/** 42/**
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index ed4d5006fe62..bfb23d543ff7 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1512,7 +1512,7 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1512 scmd->nsg = 1; 1512 scmd->nsg = 1;
1513 sg = &scmd->sgv[0]; 1513 sg = &scmd->sgv[0];
1514 sg->page = virt_to_page(sc->top_sense); 1514 sg->page = virt_to_page(sc->top_sense);
1515 sg->offset = (unsigned int)sc->top_sense & (PAGE_SIZE-1); 1515 sg->offset = (unsigned long)sc->top_sense & (PAGE_SIZE-1);
1516 sg->length = UB_SENSE_SIZE; 1516 sg->length = UB_SENSE_SIZE;
1517 scmd->len = UB_SENSE_SIZE; 1517 scmd->len = UB_SENSE_SIZE;
1518 scmd->lun = cmd->lun; 1518 scmd->lun = cmd->lun;
@@ -1891,7 +1891,7 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
1891 cmd->nsg = 1; 1891 cmd->nsg = 1;
1892 sg = &cmd->sgv[0]; 1892 sg = &cmd->sgv[0];
1893 sg->page = virt_to_page(p); 1893 sg->page = virt_to_page(p);
1894 sg->offset = (unsigned int)p & (PAGE_SIZE-1); 1894 sg->offset = (unsigned long)p & (PAGE_SIZE-1);
1895 sg->length = 8; 1895 sg->length = 8;
1896 cmd->len = 8; 1896 cmd->len = 8;
1897 cmd->lun = lun; 1897 cmd->lun = lun;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index ee1605906a3e..bbd9c2323d8c 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -7,6 +7,9 @@
7 * 7 *
8 * Copyright (c) 1999 Martin Mares <mj@ucw.cz> 8 * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
9 * 9 *
10 * Init/reset quirks for USB host controllers should be in the
11 * USB quirks file, where their drivers can access reuse it.
12 *
10 * The bridge optimization stuff has been removed. If you really 13 * The bridge optimization stuff has been removed. If you really
11 * have a silly BIOS which is unable to set your host bridge right, 14 * have a silly BIOS which is unable to set your host bridge right,
12 * use the PowerTweak utility (see http://powertweak.sourceforge.net). 15 * use the PowerTweak utility (see http://powertweak.sourceforge.net).
@@ -645,28 +648,6 @@ static void quirk_via_irq(struct pci_dev *dev)
645DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq); 648DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
646 649
647/* 650/*
648 * PIIX3 USB: We have to disable USB interrupts that are
649 * hardwired to PIRQD# and may be shared with an
650 * external device.
651 *
652 * Legacy Support Register (LEGSUP):
653 * bit13: USB PIRQ Enable (USBPIRQDEN),
654 * bit4: Trap/SMI On IRQ Enable (USBSMIEN).
655 *
656 * We mask out all r/wc bits, too.
657 */
658static void __devinit quirk_piix3_usb(struct pci_dev *dev)
659{
660 u16 legsup;
661
662 pci_read_config_word(dev, 0xc0, &legsup);
663 legsup &= 0x50ef;
664 pci_write_config_word(dev, 0xc0, legsup);
665}
666DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb );
667DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb );
668
669/*
670 * VIA VT82C598 has its device ID settable and many BIOSes 651 * VIA VT82C598 has its device ID settable and many BIOSes
671 * set it to the ID of VT82C597 for backward compatibility. 652 * set it to the ID of VT82C597 for backward compatibility.
672 * We need to switch it off to be able to recognize the real 653 * We need to switch it off to be able to recognize the real
@@ -1039,234 +1020,6 @@ static void __init quirk_sis_96x_smbus(struct pci_dev *dev)
1039 pci_read_config_byte(dev, 0x77, &val); 1020 pci_read_config_byte(dev, 0x77, &val);
1040} 1021}
1041 1022
1042
1043#define UHCI_USBLEGSUP 0xc0 /* legacy support */
1044#define UHCI_USBCMD 0 /* command register */
1045#define UHCI_USBSTS 2 /* status register */
1046#define UHCI_USBINTR 4 /* interrupt register */
1047#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
1048#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
1049#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */
1050#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */
1051#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */
1052
1053#define OHCI_CONTROL 0x04
1054#define OHCI_CMDSTATUS 0x08
1055#define OHCI_INTRSTATUS 0x0c
1056#define OHCI_INTRENABLE 0x10
1057#define OHCI_INTRDISABLE 0x14
1058#define OHCI_OCR (1 << 3) /* ownership change request */
1059#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
1060#define OHCI_INTR_OC (1 << 30) /* ownership change */
1061
1062#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
1063#define EHCI_USBCMD 0 /* command register */
1064#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
1065#define EHCI_USBSTS 4 /* status register */
1066#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
1067#define EHCI_USBINTR 8 /* interrupt register */
1068#define EHCI_USBLEGSUP 0 /* legacy support register */
1069#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
1070#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
1071#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
1072#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
1073
1074int usb_early_handoff __devinitdata = 0;
1075static int __init usb_handoff_early(char *str)
1076{
1077 usb_early_handoff = 1;
1078 return 0;
1079}
1080__setup("usb-handoff", usb_handoff_early);
1081
1082static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
1083{
1084 unsigned long base = 0;
1085 int wait_time, delta;
1086 u16 val, sts;
1087 int i;
1088
1089 for (i = 0; i < PCI_ROM_RESOURCE; i++)
1090 if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
1091 base = pci_resource_start(pdev, i);
1092 break;
1093 }
1094
1095 if (!base)
1096 return;
1097
1098 /*
1099 * stop controller
1100 */
1101 sts = inw(base + UHCI_USBSTS);
1102 val = inw(base + UHCI_USBCMD);
1103 val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE);
1104 outw(val, base + UHCI_USBCMD);
1105
1106 /*
1107 * wait while it stops if it was running
1108 */
1109 if ((sts & UHCI_USBSTS_HALTED) == 0)
1110 {
1111 wait_time = 1000;
1112 delta = 100;
1113
1114 do {
1115 outw(0x1f, base + UHCI_USBSTS);
1116 udelay(delta);
1117 wait_time -= delta;
1118 val = inw(base + UHCI_USBSTS);
1119 if (val & UHCI_USBSTS_HALTED)
1120 break;
1121 } while (wait_time > 0);
1122 }
1123
1124 /*
1125 * disable interrupts & legacy support
1126 */
1127 outw(0, base + UHCI_USBINTR);
1128 outw(0x1f, base + UHCI_USBSTS);
1129 pci_read_config_word(pdev, UHCI_USBLEGSUP, &val);
1130 if (val & 0xbf)
1131 pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
1132
1133}
1134
1135static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
1136{
1137 void __iomem *base;
1138 int wait_time;
1139
1140 base = ioremap_nocache(pci_resource_start(pdev, 0),
1141 pci_resource_len(pdev, 0));
1142 if (base == NULL) return;
1143
1144 if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
1145 wait_time = 500; /* 0.5 seconds */
1146 writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
1147 writel(OHCI_OCR, base + OHCI_CMDSTATUS);
1148 while (wait_time > 0 &&
1149 readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
1150 wait_time -= 10;
1151 msleep(10);
1152 }
1153 }
1154
1155 /*
1156 * disable interrupts
1157 */
1158 writel(~(u32)0, base + OHCI_INTRDISABLE);
1159 writel(~(u32)0, base + OHCI_INTRSTATUS);
1160
1161 iounmap(base);
1162}
1163
1164static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
1165{
1166 int wait_time, delta;
1167 void __iomem *base, *op_reg_base;
1168 u32 hcc_params, val, temp;
1169 u8 cap_length;
1170
1171 base = ioremap_nocache(pci_resource_start(pdev, 0),
1172 pci_resource_len(pdev, 0));
1173 if (base == NULL) return;
1174
1175 cap_length = readb(base);
1176 op_reg_base = base + cap_length;
1177 hcc_params = readl(base + EHCI_HCC_PARAMS);
1178 hcc_params = (hcc_params >> 8) & 0xff;
1179 if (hcc_params) {
1180 pci_read_config_dword(pdev,
1181 hcc_params + EHCI_USBLEGSUP,
1182 &val);
1183 if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
1184 /*
1185 * Ok, BIOS is in smm mode, try to hand off...
1186 */
1187 pci_read_config_dword(pdev,
1188 hcc_params + EHCI_USBLEGCTLSTS,
1189 &temp);
1190 pci_write_config_dword(pdev,
1191 hcc_params + EHCI_USBLEGCTLSTS,
1192 temp | EHCI_USBLEGCTLSTS_SOOE);
1193 val |= EHCI_USBLEGSUP_OS;
1194 pci_write_config_dword(pdev,
1195 hcc_params + EHCI_USBLEGSUP,
1196 val);
1197
1198 wait_time = 500;
1199 do {
1200 msleep(10);
1201 wait_time -= 10;
1202 pci_read_config_dword(pdev,
1203 hcc_params + EHCI_USBLEGSUP,
1204 &val);
1205 } while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
1206 if (!wait_time) {
1207 /*
1208 * well, possibly buggy BIOS...
1209 */
1210 printk(KERN_WARNING "EHCI early BIOS handoff "
1211 "failed (BIOS bug ?)\n");
1212 pci_write_config_dword(pdev,
1213 hcc_params + EHCI_USBLEGSUP,
1214 EHCI_USBLEGSUP_OS);
1215 pci_write_config_dword(pdev,
1216 hcc_params + EHCI_USBLEGCTLSTS,
1217 0);
1218 }
1219 }
1220 }
1221
1222 /*
1223 * halt EHCI & disable its interrupts in any case
1224 */
1225 val = readl(op_reg_base + EHCI_USBSTS);
1226 if ((val & EHCI_USBSTS_HALTED) == 0) {
1227 val = readl(op_reg_base + EHCI_USBCMD);
1228 val &= ~EHCI_USBCMD_RUN;
1229 writel(val, op_reg_base + EHCI_USBCMD);
1230
1231 wait_time = 2000;
1232 delta = 100;
1233 do {
1234 writel(0x3f, op_reg_base + EHCI_USBSTS);
1235 udelay(delta);
1236 wait_time -= delta;
1237 val = readl(op_reg_base + EHCI_USBSTS);
1238 if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
1239 break;
1240 }
1241 } while (wait_time > 0);
1242 }
1243 writel(0, op_reg_base + EHCI_USBINTR);
1244 writel(0x3f, op_reg_base + EHCI_USBSTS);
1245
1246 iounmap(base);
1247
1248 return;
1249}
1250
1251
1252
1253static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
1254{
1255 if (!usb_early_handoff)
1256 return;
1257
1258 if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */
1259 quirk_usb_handoff_uhci(pdev);
1260 } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */
1261 quirk_usb_handoff_ohci(pdev);
1262 } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */
1263 quirk_usb_disable_ehci(pdev);
1264 }
1265
1266 return;
1267}
1268DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
1269
1270/* 1023/*
1271 * ... This is further complicated by the fact that some SiS96x south 1024 * ... This is further complicated by the fact that some SiS96x south
1272 * bridges pretend to be 85C503/5513 instead. In that case see if we 1025 * bridges pretend to be 85C503/5513 instead. In that case see if we
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index df014c2a7c54..a50c2bc506f2 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_USB) += core/
8 8
9obj-$(CONFIG_USB_MON) += mon/ 9obj-$(CONFIG_USB_MON) += mon/
10 10
11obj-$(CONFIG_PCI) += host/
11obj-$(CONFIG_USB_EHCI_HCD) += host/ 12obj-$(CONFIG_USB_EHCI_HCD) += host/
12obj-$(CONFIG_USB_ISP116X_HCD) += host/ 13obj-$(CONFIG_USB_ISP116X_HCD) += host/
13obj-$(CONFIG_USB_OHCI_HCD) += host/ 14obj-$(CONFIG_USB_OHCI_HCD) += host/
@@ -17,7 +18,6 @@ obj-$(CONFIG_ETRAX_USB_HOST) += host/
17 18
18obj-$(CONFIG_USB_ACM) += class/ 19obj-$(CONFIG_USB_ACM) += class/
19obj-$(CONFIG_USB_AUDIO) += class/ 20obj-$(CONFIG_USB_AUDIO) += class/
20obj-$(CONFIG_USB_BLUETOOTH_TTY) += class/
21obj-$(CONFIG_USB_MIDI) += class/ 21obj-$(CONFIG_USB_MIDI) += class/
22obj-$(CONFIG_USB_PRINTER) += class/ 22obj-$(CONFIG_USB_PRINTER) += class/
23 23
diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig
index 333e39bb105f..ef105a92a7bd 100644
--- a/drivers/usb/class/Kconfig
+++ b/drivers/usb/class/Kconfig
@@ -28,29 +28,6 @@ config USB_AUDIO
28 To compile this driver as a module, choose M here: the 28 To compile this driver as a module, choose M here: the
29 module will be called audio. 29 module will be called audio.
30 30
31comment "USB Bluetooth TTY can only be used with disabled Bluetooth subsystem"
32 depends on USB && BT
33
34config USB_BLUETOOTH_TTY
35 tristate "USB Bluetooth TTY support"
36 depends on USB && BT=n
37 ---help---
38 This driver implements a nonstandard tty interface to a Bluetooth
39 device that can be used only by specialized Bluetooth HCI software.
40
41 Say Y here if you want to use OpenBT Bluetooth stack (available
42 at <http://developer.axis.com/software>), or other TTY based
43 Bluetooth stacks, and want to connect a USB Bluetooth device
44 to your computer's USB port.
45
46 Do *not* enable this driver if you want to use generic Linux
47 Bluetooth support.
48
49 If in doubt, say N here.
50
51 To compile this driver as a module, choose M here: the
52 module will be called bluetty.
53
54config USB_MIDI 31config USB_MIDI
55 tristate "USB MIDI support" 32 tristate "USB MIDI support"
56 depends on USB && SOUND && OBSOLETE_OSS_USB_DRIVER 33 depends on USB && SOUND && OBSOLETE_OSS_USB_DRIVER
diff --git a/drivers/usb/class/Makefile b/drivers/usb/class/Makefile
index 971e5497a3fd..229471247751 100644
--- a/drivers/usb/class/Makefile
+++ b/drivers/usb/class/Makefile
@@ -5,6 +5,5 @@
5 5
6obj-$(CONFIG_USB_ACM) += cdc-acm.o 6obj-$(CONFIG_USB_ACM) += cdc-acm.o
7obj-$(CONFIG_USB_AUDIO) += audio.o 7obj-$(CONFIG_USB_AUDIO) += audio.o
8obj-$(CONFIG_USB_BLUETOOTH_TTY) += bluetty.o
9obj-$(CONFIG_USB_MIDI) += usb-midi.o 8obj-$(CONFIG_USB_MIDI) += usb-midi.o
10obj-$(CONFIG_USB_PRINTER) += usblp.o 9obj-$(CONFIG_USB_PRINTER) += usblp.o
diff --git a/drivers/usb/class/bluetty.c b/drivers/usb/class/bluetty.c
deleted file mode 100644
index 524023327c49..000000000000
--- a/drivers/usb/class/bluetty.c
+++ /dev/null
@@ -1,1279 +0,0 @@
1/*
2 * bluetty.c Version 0.13
3 *
4 * Copyright (C) 2000, 2001 Greg Kroah-Hartman <greg@kroah.com>
5 * Copyright (C) 2000 Mark Douglas Corner <mcorner@umich.edu>
6 *
7 * USB Bluetooth TTY driver, based on the Bluetooth Spec version 1.0B
8 *
9 * (2001/11/30) Version 0.13 gkh
10 * - added locking patch from Masoodur Rahman <rmasoodu@in.ibm.com>
11 * - removed active variable, as open_count will do.
12 *
13 * (2001/07/09) Version 0.12 gkh
14 * - removed in_interrupt() call, as it doesn't make sense to do
15 * that anymore.
16 *
17 * (2001/06/05) Version 0.11 gkh
18 * - Fixed problem with read urb status saying that we have shutdown,
19 * and that we shouldn't resubmit the urb. Patch from unknown.
20 *
21 * (2001/05/28) Version 0.10 gkh
22 * - Fixed problem with using data from userspace in the bluetooth_write
23 * function as found by the CHECKER project.
24 * - Added a buffer to the write_urb_pool which reduces the number of
25 * buffers being created and destroyed for ever write. Also cleans
26 * up the logic a bit.
27 * - Added a buffer to the control_urb_pool which fixes a memory leak
28 * when the device is removed from the system.
29 *
30 * (2001/05/28) Version 0.9 gkh
31 * Fixed problem with bluetooth==NULL for bluetooth_read_bulk_callback
32 * which was found by both the CHECKER project and Mikko Rahkonen.
33 *
34 * (08/04/2001) gb
35 * Identify version on module load.
36 *
37 * (2001/03/10) Version 0.8 gkh
38 * Fixed problem with not unlinking interrupt urb on device close
39 * and resubmitting the read urb on error with bluetooth struct.
40 * Thanks to Narayan Mohanram <narayan@RovingNetworks.com> for the
41 * fixes.
42 *
43 * (11/29/2000) Version 0.7 gkh
44 * Fixed problem with overrunning the tty flip buffer.
45 * Removed unneeded NULL pointer initialization.
46 *
47 * (10/05/2000) Version 0.6 gkh
48 * Fixed bug with urb->dev not being set properly, now that the usb
49 * core needs it.
50 * Got a real major id number and name.
51 *
52 * (08/06/2000) Version 0.5 gkh
53 * Fixed problem of not resubmitting the bulk read urb if there is
54 * an error in the callback. Ericsson devices seem to need this.
55 *
56 * (07/11/2000) Version 0.4 gkh
57 * Fixed bug in disconnect for when we call tty_hangup
58 * Fixed bug in bluetooth_ctrl_msg where the bluetooth struct was not
59 * getting attached to the control urb properly.
60 * Fixed bug in bluetooth_write where we pay attention to the result
61 * of bluetooth_ctrl_msg.
62 *
63 * (08/03/2000) Version 0.3 gkh mdc
64 * Merged in Mark's changes to make the driver play nice with the Axis
65 * stack.
66 * Made the write bulk use an urb pool to enable larger transfers with
67 * fewer calls to the driver.
68 * Fixed off by one bug in acl pkt receive
69 * Made packet counters specific to each bluetooth device
70 * Added checks for zero length callbacks
71 * Added buffers for int and bulk packets. Had to do this otherwise
72 * packet types could intermingle.
73 * Made a control urb pool for the control messages.
74 *
75 * (07/11/2000) Version 0.2 gkh
76 * Fixed a small bug found by Nils Faerber in the usb_bluetooth_probe
77 * function.
78 *
79 * (07/09/2000) Version 0.1 gkh
80 * Initial release. Has support for sending ACL data (which is really just
81 * a HCI frame.) Raw HCI commands and HCI events are not supported.
82 * A ioctl will probably be needed for the HCI commands and events in the
83 * future. All isoch endpoints are ignored at this time also.
84 * This driver should work for all currently shipping USB Bluetooth
85 * devices at this time :)
86 *
87 */
88
89/*
90 * This program is free software; you can redistribute it and/or modify
91 * it under the terms of the GNU General Public License as published by
92 * the Free Software Foundation; either version 2 of the License, or
93 * (at your option) any later version.
94 *
95 * This program is distributed in the hope that it will be useful,
96 * but WITHOUT ANY WARRANTY; without even the implied warranty of
97 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
98 * GNU General Public License for more details.
99 *
100 * You should have received a copy of the GNU General Public License
101 * along with this program; if not, write to the Free Software
102 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
103 */
104
105
106#include <linux/kernel.h>
107#include <linux/errno.h>
108#include <linux/init.h>
109#include <linux/slab.h>
110#include <linux/tty.h>
111#include <linux/tty_driver.h>
112#include <linux/tty_flip.h>
113#include <linux/module.h>
114#include <asm/uaccess.h>
115
116#define DEBUG
117#include <linux/usb.h>
118
119/*
120 * Version Information
121 */
122#define DRIVER_VERSION "v0.13"
123#define DRIVER_AUTHOR "Greg Kroah-Hartman, Mark Douglas Corner"
124#define DRIVER_DESC "USB Bluetooth tty driver"
125
126/* define this if you have hardware that is not good */
127/*#define BTBUGGYHARDWARE */
128
129/* Class, SubClass, and Protocol codes that describe a Bluetooth device */
130#define WIRELESS_CLASS_CODE 0xe0
131#define RF_SUBCLASS_CODE 0x01
132#define BLUETOOTH_PROGRAMMING_PROTOCOL_CODE 0x01
133
134
135#define BLUETOOTH_TTY_MAJOR 216 /* real device node major id */
136#define BLUETOOTH_TTY_MINORS 256 /* whole lotta bluetooth devices */
137
138#define USB_BLUETOOTH_MAGIC 0x6d02 /* magic number for bluetooth struct */
139
140#define BLUETOOTH_CONTROL_REQUEST_TYPE 0x20
141
142/* Bluetooth packet types */
143#define CMD_PKT 0x01
144#define ACL_PKT 0x02
145#define SCO_PKT 0x03
146#define EVENT_PKT 0x04
147#define ERROR_PKT 0x05
148#define NEG_PKT 0x06
149
150/* Message sizes */
151#define MAX_EVENT_SIZE 0xFF
152#define EVENT_HDR_SIZE 3 /* 2 for the header + 1 for the type indicator */
153#define EVENT_BUFFER_SIZE (MAX_EVENT_SIZE + EVENT_HDR_SIZE)
154
155#define MAX_ACL_SIZE 0xFFFF
156#define ACL_HDR_SIZE 5 /* 4 for the header + 1 for the type indicator */
157#define ACL_BUFFER_SIZE (MAX_ACL_SIZE + ACL_HDR_SIZE)
158
159/* parity check flag */
160#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
161
162#define CHAR2INT16(c1,c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
163
164#define NUM_BULK_URBS 24
165#define NUM_CONTROL_URBS 16
166
167struct usb_bluetooth {
168 int magic;
169 struct usb_device * dev;
170 struct tty_driver * tty_driver; /* the tty_driver for this device */
171 struct tty_struct * tty; /* the corresponding tty for this port */
172
173 unsigned char minor; /* the starting minor number for this device */
174 int throttle; /* throttled by tty layer */
175 int open_count;
176
177 __u8 control_out_bInterfaceNum;
178 struct urb * control_urb_pool[NUM_CONTROL_URBS];
179 struct usb_ctrlrequest dr[NUM_CONTROL_URBS];
180
181 unsigned char * interrupt_in_buffer;
182 struct urb * interrupt_in_urb;
183 __u8 interrupt_in_endpointAddress;
184 __u8 interrupt_in_interval;
185 int interrupt_in_buffer_size;
186
187 unsigned char * bulk_in_buffer;
188 struct urb * read_urb;
189 __u8 bulk_in_endpointAddress;
190 int bulk_in_buffer_size;
191
192 int bulk_out_buffer_size;
193 __u8 bulk_out_endpointAddress;
194
195 wait_queue_head_t write_wait;
196
197 struct work_struct work; /* work queue entry for line discipline waking up */
198
199 unsigned int int_packet_pos;
200 unsigned char int_buffer[EVENT_BUFFER_SIZE];
201 unsigned int bulk_packet_pos;
202 unsigned char bulk_buffer[ACL_BUFFER_SIZE]; /* 64k preallocated, fix? */
203 struct semaphore lock;
204};
205
206
207/* local function prototypes */
208static int bluetooth_open (struct tty_struct *tty, struct file *filp);
209static void bluetooth_close (struct tty_struct *tty, struct file *filp);
210static int bluetooth_write (struct tty_struct *tty, const unsigned char *buf, int count);
211static int bluetooth_write_room (struct tty_struct *tty);
212static int bluetooth_chars_in_buffer (struct tty_struct *tty);
213static void bluetooth_throttle (struct tty_struct *tty);
214static void bluetooth_unthrottle (struct tty_struct *tty);
215static int bluetooth_ioctl (struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
216static void bluetooth_set_termios (struct tty_struct *tty, struct termios *old);
217
218static void bluetooth_int_callback (struct urb *urb, struct pt_regs *regs);
219static void bluetooth_ctrl_callback (struct urb *urb, struct pt_regs *regs);
220static void bluetooth_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
221static void bluetooth_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
222
223static int usb_bluetooth_probe (struct usb_interface *intf,
224 const struct usb_device_id *id);
225static void usb_bluetooth_disconnect (struct usb_interface *intf);
226
227
228static struct usb_device_id usb_bluetooth_ids [] = {
229 { USB_DEVICE_INFO(WIRELESS_CLASS_CODE, RF_SUBCLASS_CODE, BLUETOOTH_PROGRAMMING_PROTOCOL_CODE) },
230 { } /* Terminating entry */
231};
232
233MODULE_DEVICE_TABLE (usb, usb_bluetooth_ids);
234
235static struct usb_driver usb_bluetooth_driver = {
236 .owner = THIS_MODULE,
237 .name = "bluetty",
238 .probe = usb_bluetooth_probe,
239 .disconnect = usb_bluetooth_disconnect,
240 .id_table = usb_bluetooth_ids,
241};
242
243static struct tty_driver *bluetooth_tty_driver;
244static struct usb_bluetooth *bluetooth_table[BLUETOOTH_TTY_MINORS];
245
246
247static inline int bluetooth_paranoia_check (struct usb_bluetooth *bluetooth, const char *function)
248{
249 if (!bluetooth) {
250 dbg("%s - bluetooth == NULL", function);
251 return -1;
252 }
253 if (bluetooth->magic != USB_BLUETOOTH_MAGIC) {
254 dbg("%s - bad magic number for bluetooth", function);
255 return -1;
256 }
257
258 return 0;
259}
260
261
262static inline struct usb_bluetooth* get_usb_bluetooth (struct usb_bluetooth *bluetooth, const char *function)
263{
264 if (!bluetooth ||
265 bluetooth_paranoia_check (bluetooth, function)) {
266 /* then say that we don't have a valid usb_bluetooth thing, which will
267 * end up generating -ENODEV return values */
268 return NULL;
269 }
270
271 return bluetooth;
272}
273
274
275static inline struct usb_bluetooth *get_bluetooth_by_index (int index)
276{
277 return bluetooth_table[index];
278}
279
280
281static int bluetooth_ctrl_msg (struct usb_bluetooth *bluetooth, int request, int value, const unsigned char *buf, int len)
282{
283 struct urb *urb = NULL;
284 struct usb_ctrlrequest *dr = NULL;
285 int i;
286 int status;
287
288 dbg ("%s", __FUNCTION__);
289
290 /* try to find a free urb in our list */
291 for (i = 0; i < NUM_CONTROL_URBS; ++i) {
292 if (bluetooth->control_urb_pool[i]->status != -EINPROGRESS) {
293 urb = bluetooth->control_urb_pool[i];
294 dr = &bluetooth->dr[i];
295 break;
296 }
297 }
298 if (urb == NULL) {
299 dbg ("%s - no free urbs", __FUNCTION__);
300 return -ENOMEM;
301 }
302
303 /* keep increasing the urb transfer buffer to fit the size of the message */
304 if (urb->transfer_buffer == NULL) {
305 urb->transfer_buffer = kmalloc (len, GFP_KERNEL);
306 if (urb->transfer_buffer == NULL) {
307 err ("%s - out of memory", __FUNCTION__);
308 return -ENOMEM;
309 }
310 }
311 if (urb->transfer_buffer_length < len) {
312 kfree(urb->transfer_buffer);
313 urb->transfer_buffer = kmalloc (len, GFP_KERNEL);
314 if (urb->transfer_buffer == NULL) {
315 err ("%s - out of memory", __FUNCTION__);
316 return -ENOMEM;
317 }
318 }
319 memcpy (urb->transfer_buffer, buf, len);
320
321 dr->bRequestType= BLUETOOTH_CONTROL_REQUEST_TYPE;
322 dr->bRequest = request;
323 dr->wValue = cpu_to_le16((u16) value);
324 dr->wIndex = cpu_to_le16((u16) bluetooth->control_out_bInterfaceNum);
325 dr->wLength = cpu_to_le16((u16) len);
326
327 usb_fill_control_urb (urb, bluetooth->dev, usb_sndctrlpipe(bluetooth->dev, 0),
328 (unsigned char*)dr, urb->transfer_buffer, len, bluetooth_ctrl_callback, bluetooth);
329
330 /* send it down the pipe */
331 status = usb_submit_urb(urb, GFP_KERNEL);
332 if (status)
333 dbg("%s - usb_submit_urb(control) failed with status = %d", __FUNCTION__, status);
334
335 return status;
336}
337
338
339
340
341
342/*****************************************************************************
343 * Driver tty interface functions
344 *****************************************************************************/
345static int bluetooth_open (struct tty_struct *tty, struct file * filp)
346{
347 struct usb_bluetooth *bluetooth;
348 int result;
349
350 dbg("%s", __FUNCTION__);
351
352 /* initialize the pointer incase something fails */
353 tty->driver_data = NULL;
354
355 /* get the bluetooth object associated with this tty pointer */
356 bluetooth = get_bluetooth_by_index (tty->index);
357
358 if (bluetooth_paranoia_check (bluetooth, __FUNCTION__)) {
359 return -ENODEV;
360 }
361
362 down (&bluetooth->lock);
363
364 ++bluetooth->open_count;
365 if (bluetooth->open_count == 1) {
366 /* set up our structure making the tty driver remember our object, and us it */
367 tty->driver_data = bluetooth;
368 bluetooth->tty = tty;
369
370 /* force low_latency on so that our tty_push actually forces the data through,
371 * otherwise it is scheduled, and with high data rates (like with OHCI) data
372 * can get lost. */
373 bluetooth->tty->low_latency = 1;
374
375 /* Reset the packet position counters */
376 bluetooth->int_packet_pos = 0;
377 bluetooth->bulk_packet_pos = 0;
378
379#ifndef BTBUGGYHARDWARE
380 /* Start reading from the device */
381 usb_fill_bulk_urb (bluetooth->read_urb, bluetooth->dev,
382 usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress),
383 bluetooth->bulk_in_buffer,
384 bluetooth->bulk_in_buffer_size,
385 bluetooth_read_bulk_callback, bluetooth);
386 result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL);
387 if (result)
388 dbg("%s - usb_submit_urb(read bulk) failed with status %d", __FUNCTION__, result);
389#endif
390 usb_fill_int_urb (bluetooth->interrupt_in_urb, bluetooth->dev,
391 usb_rcvintpipe(bluetooth->dev, bluetooth->interrupt_in_endpointAddress),
392 bluetooth->interrupt_in_buffer,
393 bluetooth->interrupt_in_buffer_size,
394 bluetooth_int_callback, bluetooth,
395 bluetooth->interrupt_in_interval);
396 result = usb_submit_urb(bluetooth->interrupt_in_urb, GFP_KERNEL);
397 if (result)
398 dbg("%s - usb_submit_urb(interrupt in) failed with status %d", __FUNCTION__, result);
399 }
400
401 up(&bluetooth->lock);
402
403 return 0;
404}
405
406
407static void bluetooth_close (struct tty_struct *tty, struct file * filp)
408{
409 struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
410
411 if (!bluetooth) {
412 return;
413 }
414
415 dbg("%s", __FUNCTION__);
416
417 if (!bluetooth->open_count) {
418 dbg ("%s - device not opened", __FUNCTION__);
419 return;
420 }
421
422 down (&bluetooth->lock);
423
424 --bluetooth->open_count;
425 if (bluetooth->open_count <= 0) {
426 bluetooth->open_count = 0;
427
428 /* shutdown any in-flight urbs that we know about */
429 usb_kill_urb (bluetooth->read_urb);
430 usb_kill_urb (bluetooth->interrupt_in_urb);
431 }
432 up(&bluetooth->lock);
433}
434
435
436static int bluetooth_write (struct tty_struct * tty, const unsigned char *buf, int count)
437{
438 struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
439 struct urb *urb = NULL;
440 unsigned char *temp_buffer = NULL;
441 const unsigned char *current_buffer;
442 unsigned char *urb_buffer;
443 int i;
444 int retval = 0;
445
446 if (!bluetooth) {
447 return -ENODEV;
448 }
449
450 dbg("%s - %d byte(s)", __FUNCTION__, count);
451
452 if (!bluetooth->open_count) {
453 dbg ("%s - device not opened", __FUNCTION__);
454 return -EINVAL;
455 }
456
457 if (count == 0) {
458 dbg("%s - write request of 0 bytes", __FUNCTION__);
459 return 0;
460 }
461 if (count == 1) {
462 dbg("%s - write request only included type %d", __FUNCTION__, buf[0]);
463 return 1;
464 }
465
466#ifdef DEBUG
467 printk (KERN_DEBUG __FILE__ ": %s - length = %d, data = ", __FUNCTION__, count);
468 for (i = 0; i < count; ++i) {
469 printk ("%.2x ", buf[i]);
470 }
471 printk ("\n");
472#endif
473
474 current_buffer = buf;
475
476 switch (*current_buffer) {
477 /* First byte indicates the type of packet */
478 case CMD_PKT:
479 /* dbg("%s- Send cmd_pkt len:%d", __FUNCTION__, count);*/
480
481 retval = bluetooth_ctrl_msg (bluetooth, 0x00, 0x00, &current_buffer[1], count-1);
482 if (retval) {
483 goto exit;
484 }
485 retval = count;
486 break;
487
488 case ACL_PKT:
489 ++current_buffer;
490 --count;
491
492 urb_buffer = kmalloc (count, GFP_ATOMIC);
493 if (!urb_buffer) {
494 dev_err(&bluetooth->dev->dev, "out of memory\n");
495 retval = -ENOMEM;
496 goto exit;
497 }
498
499 urb = usb_alloc_urb(0, GFP_ATOMIC);
500 if (!urb) {
501 dev_err(&bluetooth->dev->dev, "no more free urbs\n");
502 kfree(urb_buffer);
503 retval = -ENOMEM;
504 goto exit;
505 }
506 memcpy (urb_buffer, current_buffer, count);
507
508 /* build up our urb */
509 usb_fill_bulk_urb(urb, bluetooth->dev,
510 usb_sndbulkpipe(bluetooth->dev,
511 bluetooth->bulk_out_endpointAddress),
512 urb_buffer,
513 count,
514 bluetooth_write_bulk_callback,
515 bluetooth);
516
517
518 /* send it down the pipe */
519 retval = usb_submit_urb(urb, GFP_KERNEL);
520 if (retval) {
521 dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __FUNCTION__, retval);
522 goto exit;
523 }
524
525 /* we are done with this urb, so let the host driver
526 * really free it when it is finished with it */
527 usb_free_urb (urb);
528 retval = count + 1;
529 break;
530
531 default :
532 dbg("%s - unsupported (at this time) write type", __FUNCTION__);
533 retval = -EINVAL;
534 break;
535 }
536
537exit:
538 kfree(temp_buffer);
539
540 return retval;
541}
542
543
544static int bluetooth_write_room (struct tty_struct *tty)
545{
546 dbg("%s", __FUNCTION__);
547
548 /*
549 * We really can take anything the user throws at us
550 * but let's pick a nice big number to tell the tty
551 * layer that we have lots of free space
552 */
553 return 2048;
554}
555
556
557static int bluetooth_chars_in_buffer (struct tty_struct *tty)
558{
559 dbg("%s", __FUNCTION__);
560
561 /*
562 * We can't really account for how much data we
563 * have sent out, but hasn't made it through to the
564 * device, so just tell the tty layer that everything
565 * is flushed.
566 */
567 return 0;
568}
569
570
571static void bluetooth_throttle (struct tty_struct * tty)
572{
573 struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
574
575 if (!bluetooth) {
576 return;
577 }
578
579 dbg("%s", __FUNCTION__);
580
581 if (!bluetooth->open_count) {
582 dbg ("%s - device not open", __FUNCTION__);
583 return;
584 }
585
586 dbg("%s unsupported (at this time)", __FUNCTION__);
587
588 return;
589}
590
591
592static void bluetooth_unthrottle (struct tty_struct * tty)
593{
594 struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
595
596 if (!bluetooth) {
597 return;
598 }
599
600 dbg("%s", __FUNCTION__);
601
602 if (!bluetooth->open_count) {
603 dbg ("%s - device not open", __FUNCTION__);
604 return;
605 }
606
607 dbg("%s unsupported (at this time)", __FUNCTION__);
608}
609
610
611static int bluetooth_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
612{
613 struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
614
615 if (!bluetooth) {
616 return -ENODEV;
617 }
618
619 dbg("%s - cmd 0x%.4x", __FUNCTION__, cmd);
620
621 if (!bluetooth->open_count) {
622 dbg ("%s - device not open", __FUNCTION__);
623 return -ENODEV;
624 }
625
626 /* FIXME!!! */
627 return -ENOIOCTLCMD;
628}
629
630
631static void bluetooth_set_termios (struct tty_struct *tty, struct termios * old)
632{
633 struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
634
635 if (!bluetooth) {
636 return;
637 }
638
639 dbg("%s", __FUNCTION__);
640
641 if (!bluetooth->open_count) {
642 dbg ("%s - device not open", __FUNCTION__);
643 return;
644 }
645
646 /* FIXME!!! */
647
648 return;
649}
650
651
652#ifdef BTBUGGYHARDWARE
653void btusb_enable_bulk_read(struct tty_struct *tty){
654 struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
655 int result;
656
657 if (!bluetooth) {
658 return;
659 }
660
661 dbg("%s", __FUNCTION__);
662
663 if (!bluetooth->open_count) {
664 dbg ("%s - device not open", __FUNCTION__);
665 return;
666 }
667
668 if (bluetooth->read_urb) {
669 usb_fill_bulk_urb(bluetooth->read_urb, bluetooth->dev,
670 usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress),
671 bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size,
672 bluetooth_read_bulk_callback, bluetooth);
673 result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL);
674 if (result)
675 err ("%s - failed submitting read urb, error %d", __FUNCTION__, result);
676 }
677}
678
679void btusb_disable_bulk_read(struct tty_struct *tty){
680 struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
681
682 if (!bluetooth) {
683 return;
684 }
685
686 dbg("%s", __FUNCTION__);
687
688 if (!bluetooth->open_count) {
689 dbg ("%s - device not open", __FUNCTION__);
690 return;
691 }
692
693 if ((bluetooth->read_urb) && (bluetooth->read_urb->actual_length))
694 usb_kill_urb(bluetooth->read_urb);
695}
696#endif
697
698
699/*****************************************************************************
700 * urb callback functions
701 *****************************************************************************/
702
703
704static void bluetooth_int_callback (struct urb *urb, struct pt_regs *regs)
705{
706 struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__);
707 unsigned char *data = urb->transfer_buffer;
708 unsigned int i;
709 unsigned int count = urb->actual_length;
710 unsigned int packet_size;
711 int status;
712
713 dbg("%s", __FUNCTION__);
714
715 if (!bluetooth) {
716 dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__);
717 return;
718 }
719
720 switch (urb->status) {
721 case 0:
722 /* success */
723 break;
724 case -ECONNRESET:
725 case -ENOENT:
726 case -ESHUTDOWN:
727 /* this urb is terminated, clean up */
728 dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
729 return;
730 default:
731 dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
732 goto exit;
733 }
734
735 if (!count) {
736 dbg("%s - zero length int", __FUNCTION__);
737 goto exit;
738 }
739
740
741#ifdef DEBUG
742 if (count) {
743 printk (KERN_DEBUG __FILE__ ": %s- length = %d, data = ", __FUNCTION__, count);
744 for (i = 0; i < count; ++i) {
745 printk ("%.2x ", data[i]);
746 }
747 printk ("\n");
748 }
749#endif
750
751#ifdef BTBUGGYHARDWARE
752 if ((count >= 2) && (data[0] == 0xFF) && (data[1] == 0x00)) {
753 data += 2;
754 count -= 2;
755 }
756 if (count == 0) {
757 urb->actual_length = 0;
758 goto exit;
759 }
760#endif
761 /* We add a packet type identifier to the beginning of each
762 HCI frame. This makes the data in the tty look like a
763 serial USB devices. Each HCI frame can be broken across
764 multiple URBs so we buffer them until we have a full hci
765 packet */
766
767 if (!bluetooth->int_packet_pos) {
768 bluetooth->int_buffer[0] = EVENT_PKT;
769 bluetooth->int_packet_pos++;
770 }
771
772 if (bluetooth->int_packet_pos + count > EVENT_BUFFER_SIZE) {
773 err("%s - exceeded EVENT_BUFFER_SIZE", __FUNCTION__);
774 bluetooth->int_packet_pos = 0;
775 goto exit;
776 }
777
778 memcpy (&bluetooth->int_buffer[bluetooth->int_packet_pos],
779 urb->transfer_buffer, count);
780 bluetooth->int_packet_pos += count;
781 urb->actual_length = 0;
782
783 if (bluetooth->int_packet_pos >= EVENT_HDR_SIZE)
784 packet_size = bluetooth->int_buffer[2];
785 else
786 goto exit;
787
788 if (packet_size + EVENT_HDR_SIZE < bluetooth->int_packet_pos) {
789 err("%s - packet was too long", __FUNCTION__);
790 bluetooth->int_packet_pos = 0;
791 goto exit;
792 }
793
794 if (packet_size + EVENT_HDR_SIZE == bluetooth->int_packet_pos) {
795 for (i = 0; i < bluetooth->int_packet_pos; ++i) {
796 /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them */
797 if (bluetooth->tty->flip.count >= TTY_FLIPBUF_SIZE) {
798 tty_flip_buffer_push(bluetooth->tty);
799 }
800 tty_insert_flip_char(bluetooth->tty, bluetooth->int_buffer[i], 0);
801 }
802 tty_flip_buffer_push(bluetooth->tty);
803
804 bluetooth->int_packet_pos = 0;
805 }
806
807exit:
808 status = usb_submit_urb (urb, GFP_ATOMIC);
809 if (status)
810 err ("%s - usb_submit_urb failed with result %d",
811 __FUNCTION__, status);
812}
813
814
815static void bluetooth_ctrl_callback (struct urb *urb, struct pt_regs *regs)
816{
817 struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__);
818
819 dbg("%s", __FUNCTION__);
820
821 if (!bluetooth) {
822 dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__);
823 return;
824 }
825
826 if (urb->status) {
827 dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
828 return;
829 }
830}
831
832
833static void bluetooth_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
834{
835 struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__);
836 unsigned char *data = urb->transfer_buffer;
837 unsigned int count = urb->actual_length;
838 unsigned int i;
839 unsigned int packet_size;
840 int result;
841
842
843 dbg("%s", __FUNCTION__);
844
845 if (!bluetooth) {
846 dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__);
847 return;
848 }
849
850 if (urb->status) {
851 dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
852 if (urb->status == -ENOENT) {
853 dbg("%s - URB canceled, won't reschedule", __FUNCTION__);
854 return;
855 }
856 goto exit;
857 }
858
859 if (!count) {
860 dbg("%s - zero length read bulk", __FUNCTION__);
861 goto exit;
862 }
863
864#ifdef DEBUG
865 if (count) {
866 printk (KERN_DEBUG __FILE__ ": %s- length = %d, data = ", __FUNCTION__, count);
867 for (i = 0; i < count; ++i) {
868 printk ("%.2x ", data[i]);
869 }
870 printk ("\n");
871 }
872#endif
873#ifdef BTBUGGYHARDWARE
874 if ((count == 4) && (data[0] == 0x00) && (data[1] == 0x00)
875 && (data[2] == 0x00) && (data[3] == 0x00)) {
876 urb->actual_length = 0;
877 usb_fill_bulk_urb(bluetooth->read_urb, bluetooth->dev,
878 usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress),
879 bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size,
880 bluetooth_read_bulk_callback, bluetooth);
881 result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL);
882 if (result)
883 err ("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
884
885 return;
886 }
887#endif
888 /* We add a packet type identifier to the beginning of each
889 HCI frame. This makes the data in the tty look like a
890 serial USB devices. Each HCI frame can be broken across
891 multiple URBs so we buffer them until we have a full hci
892 packet */
893
894 if (!bluetooth->bulk_packet_pos) {
895 bluetooth->bulk_buffer[0] = ACL_PKT;
896 bluetooth->bulk_packet_pos++;
897 }
898
899 if (bluetooth->bulk_packet_pos + count > ACL_BUFFER_SIZE) {
900 err("%s - exceeded ACL_BUFFER_SIZE", __FUNCTION__);
901 bluetooth->bulk_packet_pos = 0;
902 goto exit;
903 }
904
905 memcpy (&bluetooth->bulk_buffer[bluetooth->bulk_packet_pos],
906 urb->transfer_buffer, count);
907 bluetooth->bulk_packet_pos += count;
908 urb->actual_length = 0;
909
910 if (bluetooth->bulk_packet_pos >= ACL_HDR_SIZE) {
911 packet_size = CHAR2INT16(bluetooth->bulk_buffer[4],bluetooth->bulk_buffer[3]);
912 } else {
913 goto exit;
914 }
915
916 if (packet_size + ACL_HDR_SIZE < bluetooth->bulk_packet_pos) {
917 err("%s - packet was too long", __FUNCTION__);
918 bluetooth->bulk_packet_pos = 0;
919 goto exit;
920 }
921
922 if (packet_size + ACL_HDR_SIZE == bluetooth->bulk_packet_pos) {
923 for (i = 0; i < bluetooth->bulk_packet_pos; ++i) {
924 /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
925 if (bluetooth->tty->flip.count >= TTY_FLIPBUF_SIZE) {
926 tty_flip_buffer_push(bluetooth->tty);
927 }
928 tty_insert_flip_char(bluetooth->tty, bluetooth->bulk_buffer[i], 0);
929 }
930 tty_flip_buffer_push(bluetooth->tty);
931 bluetooth->bulk_packet_pos = 0;
932 }
933
934exit:
935 if (!bluetooth || !bluetooth->open_count)
936 return;
937
938 usb_fill_bulk_urb(bluetooth->read_urb, bluetooth->dev,
939 usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress),
940 bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size,
941 bluetooth_read_bulk_callback, bluetooth);
942 result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL);
943 if (result)
944 err ("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
945
946 return;
947}
948
949
950static void bluetooth_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
951{
952 struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__);
953
954 dbg("%s", __FUNCTION__);
955
956 /* free up the transfer buffer, as usb_free_urb() does not do this */
957 kfree(urb->transfer_buffer);
958
959 if (!bluetooth) {
960 dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__);
961 return;
962 }
963
964 if (urb->status) {
965 dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
966 return;
967 }
968
969 /* wake up our little function to let the tty layer know that something happened */
970 schedule_work(&bluetooth->work);
971}
972
973
974static void bluetooth_softint(void *private)
975{
976 struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)private, __FUNCTION__);
977
978 dbg("%s", __FUNCTION__);
979
980 if (!bluetooth)
981 return;
982
983 tty_wakeup(bluetooth->tty);
984}
985
986
987static int usb_bluetooth_probe (struct usb_interface *intf,
988 const struct usb_device_id *id)
989{
990 struct usb_device *dev = interface_to_usbdev (intf);
991 struct usb_bluetooth *bluetooth = NULL;
992 struct usb_host_interface *interface;
993 struct usb_endpoint_descriptor *endpoint;
994 struct usb_endpoint_descriptor *interrupt_in_endpoint[8];
995 struct usb_endpoint_descriptor *bulk_in_endpoint[8];
996 struct usb_endpoint_descriptor *bulk_out_endpoint[8];
997 int control_out_endpoint;
998
999 int minor;
1000 int buffer_size;
1001 int i;
1002 int num_interrupt_in = 0;
1003 int num_bulk_in = 0;
1004 int num_bulk_out = 0;
1005
1006 interface = intf->cur_altsetting;
1007 control_out_endpoint = interface->desc.bInterfaceNumber;
1008
1009 /* find the endpoints that we need */
1010 for (i = 0; i < interface->desc.bNumEndpoints; ++i) {
1011 endpoint = &interface->endpoint[i].desc;
1012
1013 if ((endpoint->bEndpointAddress & 0x80) &&
1014 ((endpoint->bmAttributes & 3) == 0x02)) {
1015 /* we found a bulk in endpoint */
1016 dbg("found bulk in");
1017 bulk_in_endpoint[num_bulk_in] = endpoint;
1018 ++num_bulk_in;
1019 }
1020
1021 if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
1022 ((endpoint->bmAttributes & 3) == 0x02)) {
1023 /* we found a bulk out endpoint */
1024 dbg("found bulk out");
1025 bulk_out_endpoint[num_bulk_out] = endpoint;
1026 ++num_bulk_out;
1027 }
1028
1029 if ((endpoint->bEndpointAddress & 0x80) &&
1030 ((endpoint->bmAttributes & 3) == 0x03)) {
1031 /* we found a interrupt in endpoint */
1032 dbg("found interrupt in");
1033 interrupt_in_endpoint[num_interrupt_in] = endpoint;
1034 ++num_interrupt_in;
1035 }
1036 }
1037
1038 /* according to the spec, we can only have 1 bulk_in, 1 bulk_out, and 1 interrupt_in endpoints */
1039 if ((num_bulk_in != 1) ||
1040 (num_bulk_out != 1) ||
1041 (num_interrupt_in != 1)) {
1042 dbg ("%s - improper number of endpoints. Bluetooth driver not bound.", __FUNCTION__);
1043 return -EIO;
1044 }
1045
1046 info("USB Bluetooth converter detected");
1047
1048 for (minor = 0; minor < BLUETOOTH_TTY_MINORS && bluetooth_table[minor]; ++minor)
1049 ;
1050 if (bluetooth_table[minor]) {
1051 err("No more free Bluetooth devices");
1052 return -ENODEV;
1053 }
1054
1055 if (!(bluetooth = kmalloc(sizeof(struct usb_bluetooth), GFP_KERNEL))) {
1056 err("Out of memory");
1057 return -ENOMEM;
1058 }
1059
1060 memset(bluetooth, 0, sizeof(struct usb_bluetooth));
1061
1062 bluetooth->magic = USB_BLUETOOTH_MAGIC;
1063 bluetooth->dev = dev;
1064 bluetooth->minor = minor;
1065 INIT_WORK(&bluetooth->work, bluetooth_softint, bluetooth);
1066 init_MUTEX(&bluetooth->lock);
1067
1068 /* record the interface number for the control out */
1069 bluetooth->control_out_bInterfaceNum = control_out_endpoint;
1070
1071 /* create our control out urb pool */
1072 for (i = 0; i < NUM_CONTROL_URBS; ++i) {
1073 struct urb *urb = usb_alloc_urb(0, GFP_KERNEL);
1074 if (urb == NULL) {
1075 err("No free urbs available");
1076 goto probe_error;
1077 }
1078 urb->transfer_buffer = NULL;
1079 bluetooth->control_urb_pool[i] = urb;
1080 }
1081
1082 /* set up the endpoint information */
1083 endpoint = bulk_in_endpoint[0];
1084 bluetooth->read_urb = usb_alloc_urb (0, GFP_KERNEL);
1085 if (!bluetooth->read_urb) {
1086 err("No free urbs available");
1087 goto probe_error;
1088 }
1089 bluetooth->bulk_in_buffer_size = buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
1090 bluetooth->bulk_in_endpointAddress = endpoint->bEndpointAddress;
1091 bluetooth->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
1092 if (!bluetooth->bulk_in_buffer) {
1093 err("Couldn't allocate bulk_in_buffer");
1094 goto probe_error;
1095 }
1096 usb_fill_bulk_urb(bluetooth->read_urb, dev, usb_rcvbulkpipe(dev, endpoint->bEndpointAddress),
1097 bluetooth->bulk_in_buffer, buffer_size, bluetooth_read_bulk_callback, bluetooth);
1098
1099 endpoint = bulk_out_endpoint[0];
1100 bluetooth->bulk_out_endpointAddress = endpoint->bEndpointAddress;
1101 bluetooth->bulk_out_buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2;
1102
1103 endpoint = interrupt_in_endpoint[0];
1104 bluetooth->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
1105 if (!bluetooth->interrupt_in_urb) {
1106 err("No free urbs available");
1107 goto probe_error;
1108 }
1109 bluetooth->interrupt_in_buffer_size = buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
1110 bluetooth->interrupt_in_endpointAddress = endpoint->bEndpointAddress;
1111 bluetooth->interrupt_in_interval = endpoint->bInterval;
1112 bluetooth->interrupt_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
1113 if (!bluetooth->interrupt_in_buffer) {
1114 err("Couldn't allocate interrupt_in_buffer");
1115 goto probe_error;
1116 }
1117 usb_fill_int_urb(bluetooth->interrupt_in_urb, dev, usb_rcvintpipe(dev, endpoint->bEndpointAddress),
1118 bluetooth->interrupt_in_buffer, buffer_size, bluetooth_int_callback,
1119 bluetooth, endpoint->bInterval);
1120
1121 /* initialize the devfs nodes for this device and let the user know what bluetooths we are bound to */
1122 tty_register_device (bluetooth_tty_driver, minor, &intf->dev);
1123 info("Bluetooth converter now attached to ttyUB%d (or usb/ttub/%d for devfs)", minor, minor);
1124
1125 bluetooth_table[minor] = bluetooth;
1126
1127 /* success */
1128 usb_set_intfdata (intf, bluetooth);
1129 return 0;
1130
1131probe_error:
1132 if (bluetooth->read_urb)
1133 usb_free_urb (bluetooth->read_urb);
1134 if (bluetooth->bulk_in_buffer)
1135 kfree (bluetooth->bulk_in_buffer);
1136 if (bluetooth->interrupt_in_urb)
1137 usb_free_urb (bluetooth->interrupt_in_urb);
1138 if (bluetooth->interrupt_in_buffer)
1139 kfree (bluetooth->interrupt_in_buffer);
1140 for (i = 0; i < NUM_CONTROL_URBS; ++i)
1141 if (bluetooth->control_urb_pool[i]) {
1142 if (bluetooth->control_urb_pool[i]->transfer_buffer)
1143 kfree (bluetooth->control_urb_pool[i]->transfer_buffer);
1144 usb_free_urb (bluetooth->control_urb_pool[i]);
1145 }
1146
1147 bluetooth_table[minor] = NULL;
1148
1149 /* free up any memory that we allocated */
1150 kfree (bluetooth);
1151 return -EIO;
1152}
1153
1154
1155static void usb_bluetooth_disconnect(struct usb_interface *intf)
1156{
1157 struct usb_bluetooth *bluetooth = usb_get_intfdata (intf);
1158 int i;
1159
1160 usb_set_intfdata (intf, NULL);
1161 if (bluetooth) {
1162 if ((bluetooth->open_count) && (bluetooth->tty))
1163 tty_hangup(bluetooth->tty);
1164
1165 bluetooth->open_count = 0;
1166
1167 if (bluetooth->read_urb) {
1168 usb_kill_urb (bluetooth->read_urb);
1169 usb_free_urb (bluetooth->read_urb);
1170 }
1171 if (bluetooth->bulk_in_buffer)
1172 kfree (bluetooth->bulk_in_buffer);
1173
1174 if (bluetooth->interrupt_in_urb) {
1175 usb_kill_urb (bluetooth->interrupt_in_urb);
1176 usb_free_urb (bluetooth->interrupt_in_urb);
1177 }
1178 if (bluetooth->interrupt_in_buffer)
1179 kfree (bluetooth->interrupt_in_buffer);
1180
1181 tty_unregister_device (bluetooth_tty_driver, bluetooth->minor);
1182
1183 for (i = 0; i < NUM_CONTROL_URBS; ++i) {
1184 if (bluetooth->control_urb_pool[i]) {
1185 usb_kill_urb (bluetooth->control_urb_pool[i]);
1186 if (bluetooth->control_urb_pool[i]->transfer_buffer)
1187 kfree (bluetooth->control_urb_pool[i]->transfer_buffer);
1188 usb_free_urb (bluetooth->control_urb_pool[i]);
1189 }
1190 }
1191
1192 info("Bluetooth converter now disconnected from ttyUB%d", bluetooth->minor);
1193
1194 bluetooth_table[bluetooth->minor] = NULL;
1195
1196 /* free up any memory that we allocated */
1197 kfree (bluetooth);
1198 } else {
1199 info("device disconnected");
1200 }
1201}
1202
1203static struct tty_operations bluetooth_ops = {
1204 .open = bluetooth_open,
1205 .close = bluetooth_close,
1206 .write = bluetooth_write,
1207 .write_room = bluetooth_write_room,
1208 .ioctl = bluetooth_ioctl,
1209 .set_termios = bluetooth_set_termios,
1210 .throttle = bluetooth_throttle,
1211 .unthrottle = bluetooth_unthrottle,
1212 .chars_in_buffer = bluetooth_chars_in_buffer,
1213};
1214
1215static int usb_bluetooth_init(void)
1216{
1217 int i;
1218 int result;
1219
1220 /* Initialize our global data */
1221 for (i = 0; i < BLUETOOTH_TTY_MINORS; ++i) {
1222 bluetooth_table[i] = NULL;
1223 }
1224
1225 info ("USB Bluetooth support registered");
1226
1227 bluetooth_tty_driver = alloc_tty_driver(BLUETOOTH_TTY_MINORS);
1228 if (!bluetooth_tty_driver)
1229 return -ENOMEM;
1230
1231 bluetooth_tty_driver->owner = THIS_MODULE;
1232 bluetooth_tty_driver->driver_name = "usb-bluetooth";
1233 bluetooth_tty_driver->name = "ttyUB";
1234 bluetooth_tty_driver->devfs_name = "usb/ttub/";
1235 bluetooth_tty_driver->major = BLUETOOTH_TTY_MAJOR;
1236 bluetooth_tty_driver->minor_start = 0;
1237 bluetooth_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
1238 bluetooth_tty_driver->subtype = SERIAL_TYPE_NORMAL;
1239 bluetooth_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
1240 bluetooth_tty_driver->init_termios = tty_std_termios;
1241 bluetooth_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
1242 tty_set_operations(bluetooth_tty_driver, &bluetooth_ops);
1243 if (tty_register_driver (bluetooth_tty_driver)) {
1244 err("%s - failed to register tty driver", __FUNCTION__);
1245 put_tty_driver(bluetooth_tty_driver);
1246 return -1;
1247 }
1248
1249 /* register the USB driver */
1250 result = usb_register(&usb_bluetooth_driver);
1251 if (result < 0) {
1252 tty_unregister_driver(bluetooth_tty_driver);
1253 put_tty_driver(bluetooth_tty_driver);
1254 err("usb_register failed for the USB bluetooth driver. Error number %d", result);
1255 return -1;
1256 }
1257
1258 info(DRIVER_DESC " " DRIVER_VERSION);
1259
1260 return 0;
1261}
1262
1263
1264static void usb_bluetooth_exit(void)
1265{
1266 usb_deregister(&usb_bluetooth_driver);
1267 tty_unregister_driver(bluetooth_tty_driver);
1268 put_tty_driver(bluetooth_tty_driver);
1269}
1270
1271
1272module_init(usb_bluetooth_init);
1273module_exit(usb_bluetooth_exit);
1274
1275/* Module information */
1276MODULE_AUTHOR( DRIVER_AUTHOR );
1277MODULE_DESCRIPTION( DRIVER_DESC );
1278MODULE_LICENSE("GPL");
1279
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 16ecad30e29c..1b4751412970 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -827,11 +827,10 @@ skip_normal_probe:
827 return -ENODEV; 827 return -ENODEV;
828 } 828 }
829 829
830 if (!(acm = kmalloc(sizeof(struct acm), GFP_KERNEL))) { 830 if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
831 dev_dbg(&intf->dev, "out of memory (acm kmalloc)\n"); 831 dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
832 goto alloc_fail; 832 goto alloc_fail;
833 } 833 }
834 memset(acm, 0, sizeof(struct acm));
835 834
836 ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize); 835 ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize);
837 readsize = le16_to_cpu(epread->wMaxPacketSize); 836 readsize = le16_to_cpu(epread->wMaxPacketSize);
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index e195709c9c7f..357e75335f17 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -844,9 +844,8 @@ static struct file_operations usblp_fops = {
844}; 844};
845 845
846static struct usb_class_driver usblp_class = { 846static struct usb_class_driver usblp_class = {
847 .name = "usb/lp%d", 847 .name = "lp%d",
848 .fops = &usblp_fops, 848 .fops = &usblp_fops,
849 .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
850 .minor_base = USBLP_MINOR_BASE, 849 .minor_base = USBLP_MINOR_BASE,
851}; 850};
852 851
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 1a9ff6184943..ff03184da403 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -61,14 +61,17 @@ config USB_DYNAMIC_MINORS
61 If you are unsure about this, say N here. 61 If you are unsure about this, say N here.
62 62
63config USB_SUSPEND 63config USB_SUSPEND
64 bool "USB suspend/resume (EXPERIMENTAL)" 64 bool "USB selective suspend/resume and wakeup (EXPERIMENTAL)"
65 depends on USB && PM && EXPERIMENTAL 65 depends on USB && PM && EXPERIMENTAL
66 help 66 help
67 If you say Y here, you can use driver calls or the sysfs 67 If you say Y here, you can use driver calls or the sysfs
68 "power/state" file to suspend or resume individual USB 68 "power/state" file to suspend or resume individual USB
69 peripherals. There are many related features, such as 69 peripherals.
70 remote wakeup and driver-specific suspend processing, that 70
71 may not yet work as expected. 71 Also, USB "remote wakeup" signaling is supported, whereby some
72 USB devices (like keyboards and network adapters) can wake up
73 their parent hub. That wakeup cascades up the USB tree, and
74 could wake the system from states like suspend-to-RAM.
72 75
73 If you are unsure about this, say N here. 76 If you are unsure about this, say N here.
74 77
diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
index d5503cf0bf74..dd1c4d2a0c31 100644
--- a/drivers/usb/core/Makefile
+++ b/drivers/usb/core/Makefile
@@ -3,7 +3,7 @@
3# 3#
4 4
5usbcore-objs := usb.o hub.o hcd.o urb.o message.o \ 5usbcore-objs := usb.o hub.o hcd.o urb.o message.o \
6 config.o file.o buffer.o sysfs.o devio.o 6 config.o file.o buffer.o sysfs.o devio.o notify.o
7 7
8ifeq ($(CONFIG_PCI),y) 8ifeq ($(CONFIG_PCI),y)
9 usbcore-objs += hcd-pci.o 9 usbcore-objs += hcd-pci.o
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 99595e07b653..993019500cc3 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -112,8 +112,12 @@ void usb_release_interface_cache(struct kref *ref)
112 struct usb_interface_cache *intfc = ref_to_usb_interface_cache(ref); 112 struct usb_interface_cache *intfc = ref_to_usb_interface_cache(ref);
113 int j; 113 int j;
114 114
115 for (j = 0; j < intfc->num_altsetting; j++) 115 for (j = 0; j < intfc->num_altsetting; j++) {
116 kfree(intfc->altsetting[j].endpoint); 116 struct usb_host_interface *alt = &intfc->altsetting[j];
117
118 kfree(alt->endpoint);
119 kfree(alt->string);
120 }
117 kfree(intfc); 121 kfree(intfc);
118} 122}
119 123
@@ -188,10 +192,9 @@ static int usb_parse_interface(struct device *ddev, int cfgno,
188 } 192 }
189 193
190 len = sizeof(struct usb_host_endpoint) * num_ep; 194 len = sizeof(struct usb_host_endpoint) * num_ep;
191 alt->endpoint = kmalloc(len, GFP_KERNEL); 195 alt->endpoint = kzalloc(len, GFP_KERNEL);
192 if (!alt->endpoint) 196 if (!alt->endpoint)
193 return -ENOMEM; 197 return -ENOMEM;
194 memset(alt->endpoint, 0, len);
195 198
196 /* Parse all the endpoint descriptors */ 199 /* Parse all the endpoint descriptors */
197 n = 0; 200 n = 0;
@@ -353,10 +356,9 @@ static int usb_parse_configuration(struct device *ddev, int cfgidx,
353 } 356 }
354 357
355 len = sizeof(*intfc) + sizeof(struct usb_host_interface) * j; 358 len = sizeof(*intfc) + sizeof(struct usb_host_interface) * j;
356 config->intf_cache[i] = intfc = kmalloc(len, GFP_KERNEL); 359 config->intf_cache[i] = intfc = kzalloc(len, GFP_KERNEL);
357 if (!intfc) 360 if (!intfc)
358 return -ENOMEM; 361 return -ENOMEM;
359 memset(intfc, 0, len);
360 kref_init(&intfc->ref); 362 kref_init(&intfc->ref);
361 } 363 }
362 364
@@ -422,8 +424,6 @@ void usb_destroy_configuration(struct usb_device *dev)
422 struct usb_host_config *cf = &dev->config[c]; 424 struct usb_host_config *cf = &dev->config[c];
423 425
424 kfree(cf->string); 426 kfree(cf->string);
425 cf->string = NULL;
426
427 for (i = 0; i < cf->desc.bNumInterfaces; i++) { 427 for (i = 0; i < cf->desc.bNumInterfaces; i++) {
428 if (cf->intf_cache[i]) 428 if (cf->intf_cache[i])
429 kref_put(&cf->intf_cache[i]->ref, 429 kref_put(&cf->intf_cache[i]->ref,
@@ -459,16 +459,14 @@ int usb_get_configuration(struct usb_device *dev)
459 } 459 }
460 460
461 length = ncfg * sizeof(struct usb_host_config); 461 length = ncfg * sizeof(struct usb_host_config);
462 dev->config = kmalloc(length, GFP_KERNEL); 462 dev->config = kzalloc(length, GFP_KERNEL);
463 if (!dev->config) 463 if (!dev->config)
464 goto err2; 464 goto err2;
465 memset(dev->config, 0, length);
466 465
467 length = ncfg * sizeof(char *); 466 length = ncfg * sizeof(char *);
468 dev->rawdescriptors = kmalloc(length, GFP_KERNEL); 467 dev->rawdescriptors = kzalloc(length, GFP_KERNEL);
469 if (!dev->rawdescriptors) 468 if (!dev->rawdescriptors)
470 goto err2; 469 goto err2;
471 memset(dev->rawdescriptors, 0, length);
472 470
473 buffer = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL); 471 buffer = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL);
474 if (!buffer) 472 if (!buffer)
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index befe0c7f63d1..942cd437dc48 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -46,6 +46,7 @@
46#include <linux/usb.h> 46#include <linux/usb.h>
47#include <linux/usbdevice_fs.h> 47#include <linux/usbdevice_fs.h>
48#include <linux/cdev.h> 48#include <linux/cdev.h>
49#include <linux/notifier.h>
49#include <asm/uaccess.h> 50#include <asm/uaccess.h>
50#include <asm/byteorder.h> 51#include <asm/byteorder.h>
51#include <linux/moduleparam.h> 52#include <linux/moduleparam.h>
@@ -209,10 +210,10 @@ err:
209static struct async *alloc_async(unsigned int numisoframes) 210static struct async *alloc_async(unsigned int numisoframes)
210{ 211{
211 unsigned int assize = sizeof(struct async) + numisoframes * sizeof(struct usb_iso_packet_descriptor); 212 unsigned int assize = sizeof(struct async) + numisoframes * sizeof(struct usb_iso_packet_descriptor);
212 struct async *as = kmalloc(assize, GFP_KERNEL); 213 struct async *as = kzalloc(assize, GFP_KERNEL);
214
213 if (!as) 215 if (!as)
214 return NULL; 216 return NULL;
215 memset(as, 0, assize);
216 as->urb = usb_alloc_urb(numisoframes, GFP_KERNEL); 217 as->urb = usb_alloc_urb(numisoframes, GFP_KERNEL);
217 if (!as->urb) { 218 if (!as->urb) {
218 kfree(as); 219 kfree(as);
@@ -279,6 +280,28 @@ static inline struct async *async_getpending(struct dev_state *ps, void __user *
279 return NULL; 280 return NULL;
280} 281}
281 282
283static void snoop_urb(struct urb *urb, void __user *userurb)
284{
285 int j;
286 unsigned char *data = urb->transfer_buffer;
287
288 if (!usbfs_snoop)
289 return;
290
291 if (urb->pipe & USB_DIR_IN)
292 dev_info(&urb->dev->dev, "direction=IN\n");
293 else
294 dev_info(&urb->dev->dev, "direction=OUT\n");
295 dev_info(&urb->dev->dev, "userurb=%p\n", userurb);
296 dev_info(&urb->dev->dev, "transfer_buffer_length=%d\n",
297 urb->transfer_buffer_length);
298 dev_info(&urb->dev->dev, "actual_length=%d\n", urb->actual_length);
299 dev_info(&urb->dev->dev, "data: ");
300 for (j = 0; j < urb->transfer_buffer_length; ++j)
301 printk ("%02x ", data[j]);
302 printk("\n");
303}
304
282static void async_completed(struct urb *urb, struct pt_regs *regs) 305static void async_completed(struct urb *urb, struct pt_regs *regs)
283{ 306{
284 struct async *as = (struct async *)urb->context; 307 struct async *as = (struct async *)urb->context;
@@ -296,7 +319,9 @@ static void async_completed(struct urb *urb, struct pt_regs *regs)
296 kill_proc_info_as_uid(as->signr, &sinfo, as->pid, as->uid, 319 kill_proc_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
297 as->euid); 320 as->euid);
298 } 321 }
299 wake_up(&ps->wait); 322 snoop(&urb->dev->dev, "urb complete\n");
323 snoop_urb(urb, as->userurb);
324 wake_up(&ps->wait);
300} 325}
301 326
302static void destroy_async (struct dev_state *ps, struct list_head *list) 327static void destroy_async (struct dev_state *ps, struct list_head *list)
@@ -493,6 +518,23 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, unsig
493 return ret; 518 return ret;
494} 519}
495 520
521static struct usb_device *usbdev_lookup_minor(int minor)
522{
523 struct class_device *class_dev;
524 struct usb_device *dev = NULL;
525
526 down(&usb_device_class->sem);
527 list_for_each_entry(class_dev, &usb_device_class->children, node) {
528 if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
529 dev = class_dev->class_data;
530 break;
531 }
532 }
533 up(&usb_device_class->sem);
534
535 return dev;
536};
537
496/* 538/*
497 * file operations 539 * file operations
498 */ 540 */
@@ -601,7 +643,7 @@ static int proc_control(struct dev_state *ps, void __user *arg)
601 if (usbfs_snoop) { 643 if (usbfs_snoop) {
602 dev_info(&dev->dev, "control read: data "); 644 dev_info(&dev->dev, "control read: data ");
603 for (j = 0; j < i; ++j) 645 for (j = 0; j < i; ++j)
604 printk ("%02x ", (unsigned char)(tbuf)[j]); 646 printk("%02x ", (unsigned char)(tbuf)[j]);
605 printk("\n"); 647 printk("\n");
606 } 648 }
607 if (copy_to_user(ctrl.data, tbuf, i)) { 649 if (copy_to_user(ctrl.data, tbuf, i)) {
@@ -624,7 +666,7 @@ static int proc_control(struct dev_state *ps, void __user *arg)
624 if (usbfs_snoop) { 666 if (usbfs_snoop) {
625 dev_info(&dev->dev, "control write: data: "); 667 dev_info(&dev->dev, "control write: data: ");
626 for (j = 0; j < ctrl.wLength; ++j) 668 for (j = 0; j < ctrl.wLength; ++j)
627 printk ("%02x ", (unsigned char)(tbuf)[j]); 669 printk("%02x ", (unsigned char)(tbuf)[j]);
628 printk("\n"); 670 printk("\n");
629 } 671 }
630 usb_unlock_device(dev); 672 usb_unlock_device(dev);
@@ -649,7 +691,7 @@ static int proc_bulk(struct dev_state *ps, void __user *arg)
649 unsigned int tmo, len1, pipe; 691 unsigned int tmo, len1, pipe;
650 int len2; 692 int len2;
651 unsigned char *tbuf; 693 unsigned char *tbuf;
652 int i, ret; 694 int i, j, ret;
653 695
654 if (copy_from_user(&bulk, arg, sizeof(bulk))) 696 if (copy_from_user(&bulk, arg, sizeof(bulk)))
655 return -EFAULT; 697 return -EFAULT;
@@ -674,10 +716,18 @@ static int proc_bulk(struct dev_state *ps, void __user *arg)
674 kfree(tbuf); 716 kfree(tbuf);
675 return -EINVAL; 717 return -EINVAL;
676 } 718 }
719 snoop(&dev->dev, "bulk read: len=0x%02x timeout=%04d\n",
720 bulk.len, bulk.timeout);
677 usb_unlock_device(dev); 721 usb_unlock_device(dev);
678 i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo); 722 i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
679 usb_lock_device(dev); 723 usb_lock_device(dev);
680 if (!i && len2) { 724 if (!i && len2) {
725 if (usbfs_snoop) {
726 dev_info(&dev->dev, "bulk read: data ");
727 for (j = 0; j < len2; ++j)
728 printk("%02x ", (unsigned char)(tbuf)[j]);
729 printk("\n");
730 }
681 if (copy_to_user(bulk.data, tbuf, len2)) { 731 if (copy_to_user(bulk.data, tbuf, len2)) {
682 kfree(tbuf); 732 kfree(tbuf);
683 return -EFAULT; 733 return -EFAULT;
@@ -690,6 +740,14 @@ static int proc_bulk(struct dev_state *ps, void __user *arg)
690 return -EFAULT; 740 return -EFAULT;
691 } 741 }
692 } 742 }
743 snoop(&dev->dev, "bulk write: len=0x%02x timeout=%04d\n",
744 bulk.len, bulk.timeout);
745 if (usbfs_snoop) {
746 dev_info(&dev->dev, "bulk write: data: ");
747 for (j = 0; j < len1; ++j)
748 printk("%02x ", (unsigned char)(tbuf)[j]);
749 printk("\n");
750 }
693 usb_unlock_device(dev); 751 usb_unlock_device(dev);
694 i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo); 752 i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
695 usb_lock_device(dev); 753 usb_lock_device(dev);
@@ -835,7 +893,6 @@ static int proc_setconfig(struct dev_state *ps, void __user *arg)
835 return status; 893 return status;
836} 894}
837 895
838
839static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, 896static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
840 struct usbdevfs_iso_packet_desc __user *iso_frame_desc, 897 struct usbdevfs_iso_packet_desc __user *iso_frame_desc,
841 void __user *arg) 898 void __user *arg)
@@ -896,6 +953,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
896 kfree(dr); 953 kfree(dr);
897 return -EFAULT; 954 return -EFAULT;
898 } 955 }
956 snoop(&ps->dev->dev, "control urb\n");
899 break; 957 break;
900 958
901 case USBDEVFS_URB_TYPE_BULK: 959 case USBDEVFS_URB_TYPE_BULK:
@@ -910,6 +968,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
910 return -EINVAL; 968 return -EINVAL;
911 if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length)) 969 if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length))
912 return -EFAULT; 970 return -EFAULT;
971 snoop(&ps->dev->dev, "bulk urb\n");
913 break; 972 break;
914 973
915 case USBDEVFS_URB_TYPE_ISO: 974 case USBDEVFS_URB_TYPE_ISO:
@@ -939,6 +998,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
939 return -EINVAL; 998 return -EINVAL;
940 } 999 }
941 uurb->buffer_length = totlen; 1000 uurb->buffer_length = totlen;
1001 snoop(&ps->dev->dev, "iso urb\n");
942 break; 1002 break;
943 1003
944 case USBDEVFS_URB_TYPE_INTERRUPT: 1004 case USBDEVFS_URB_TYPE_INTERRUPT:
@@ -954,6 +1014,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
954 return -EINVAL; 1014 return -EINVAL;
955 if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length)) 1015 if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length))
956 return -EFAULT; 1016 return -EFAULT;
1017 snoop(&ps->dev->dev, "interrupt urb\n");
957 break; 1018 break;
958 1019
959 default: 1020 default:
@@ -1003,6 +1064,8 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
1003 return -EFAULT; 1064 return -EFAULT;
1004 } 1065 }
1005 } 1066 }
1067 snoop(&as->urb->dev->dev, "submit urb\n");
1068 snoop_urb(as->urb, as->userurb);
1006 async_newpending(as); 1069 async_newpending(as);
1007 if ((ret = usb_submit_urb(as->urb, GFP_KERNEL))) { 1070 if ((ret = usb_submit_urb(as->urb, GFP_KERNEL))) {
1008 dev_printk(KERN_DEBUG, &ps->dev->dev, "usbfs: usb_submit_urb returned %d\n", ret); 1071 dev_printk(KERN_DEBUG, &ps->dev->dev, "usbfs: usb_submit_urb returned %d\n", ret);
@@ -1238,23 +1301,20 @@ static int proc_releaseinterface(struct dev_state *ps, void __user *arg)
1238 return 0; 1301 return 0;
1239} 1302}
1240 1303
1241static int proc_ioctl (struct dev_state *ps, void __user *arg) 1304static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl)
1242{ 1305{
1243 struct usbdevfs_ioctl ctrl;
1244 int size; 1306 int size;
1245 void *buf = NULL; 1307 void *buf = NULL;
1246 int retval = 0; 1308 int retval = 0;
1247 struct usb_interface *intf = NULL; 1309 struct usb_interface *intf = NULL;
1248 struct usb_driver *driver = NULL; 1310 struct usb_driver *driver = NULL;
1249 1311
1250 /* get input parameters and alloc buffer */ 1312 /* alloc buffer */
1251 if (copy_from_user(&ctrl, arg, sizeof (ctrl))) 1313 if ((size = _IOC_SIZE (ctl->ioctl_code)) > 0) {
1252 return -EFAULT;
1253 if ((size = _IOC_SIZE (ctrl.ioctl_code)) > 0) {
1254 if ((buf = kmalloc (size, GFP_KERNEL)) == NULL) 1314 if ((buf = kmalloc (size, GFP_KERNEL)) == NULL)
1255 return -ENOMEM; 1315 return -ENOMEM;
1256 if ((_IOC_DIR(ctrl.ioctl_code) & _IOC_WRITE)) { 1316 if ((_IOC_DIR(ctl->ioctl_code) & _IOC_WRITE)) {
1257 if (copy_from_user (buf, ctrl.data, size)) { 1317 if (copy_from_user (buf, ctl->data, size)) {
1258 kfree(buf); 1318 kfree(buf);
1259 return -EFAULT; 1319 return -EFAULT;
1260 } 1320 }
@@ -1270,9 +1330,9 @@ static int proc_ioctl (struct dev_state *ps, void __user *arg)
1270 1330
1271 if (ps->dev->state != USB_STATE_CONFIGURED) 1331 if (ps->dev->state != USB_STATE_CONFIGURED)
1272 retval = -EHOSTUNREACH; 1332 retval = -EHOSTUNREACH;
1273 else if (!(intf = usb_ifnum_to_if (ps->dev, ctrl.ifno))) 1333 else if (!(intf = usb_ifnum_to_if (ps->dev, ctl->ifno)))
1274 retval = -EINVAL; 1334 retval = -EINVAL;
1275 else switch (ctrl.ioctl_code) { 1335 else switch (ctl->ioctl_code) {
1276 1336
1277 /* disconnect kernel driver from interface */ 1337 /* disconnect kernel driver from interface */
1278 case USBDEVFS_DISCONNECT: 1338 case USBDEVFS_DISCONNECT:
@@ -1304,7 +1364,7 @@ static int proc_ioctl (struct dev_state *ps, void __user *arg)
1304 if (driver == NULL || driver->ioctl == NULL) { 1364 if (driver == NULL || driver->ioctl == NULL) {
1305 retval = -ENOTTY; 1365 retval = -ENOTTY;
1306 } else { 1366 } else {
1307 retval = driver->ioctl (intf, ctrl.ioctl_code, buf); 1367 retval = driver->ioctl (intf, ctl->ioctl_code, buf);
1308 if (retval == -ENOIOCTLCMD) 1368 if (retval == -ENOIOCTLCMD)
1309 retval = -ENOTTY; 1369 retval = -ENOTTY;
1310 } 1370 }
@@ -1313,15 +1373,42 @@ static int proc_ioctl (struct dev_state *ps, void __user *arg)
1313 1373
1314 /* cleanup and return */ 1374 /* cleanup and return */
1315 if (retval >= 0 1375 if (retval >= 0
1316 && (_IOC_DIR (ctrl.ioctl_code) & _IOC_READ) != 0 1376 && (_IOC_DIR (ctl->ioctl_code) & _IOC_READ) != 0
1317 && size > 0 1377 && size > 0
1318 && copy_to_user (ctrl.data, buf, size) != 0) 1378 && copy_to_user (ctl->data, buf, size) != 0)
1319 retval = -EFAULT; 1379 retval = -EFAULT;
1320 1380
1321 kfree(buf); 1381 kfree(buf);
1322 return retval; 1382 return retval;
1323} 1383}
1324 1384
1385static int proc_ioctl_default(struct dev_state *ps, void __user *arg)
1386{
1387 struct usbdevfs_ioctl ctrl;
1388
1389 if (copy_from_user(&ctrl, arg, sizeof (ctrl)))
1390 return -EFAULT;
1391 return proc_ioctl(ps, &ctrl);
1392}
1393
1394#ifdef CONFIG_COMPAT
1395static int proc_ioctl_compat(struct dev_state *ps, void __user *arg)
1396{
1397 struct usbdevfs_ioctl32 __user *uioc;
1398 struct usbdevfs_ioctl ctrl;
1399 u32 udata;
1400
1401 uioc = compat_ptr(arg);
1402 if (get_user(ctrl.ifno, &uioc->ifno) ||
1403 get_user(ctrl.ioctl_code, &uioc->ioctl_code) ||
1404 __get_user(udata, &uioc->data))
1405 return -EFAULT;
1406 ctrl.data = compat_ptr(udata);
1407
1408 return proc_ioctl(ps, &ctrl);
1409}
1410#endif
1411
1325/* 1412/*
1326 * NOTE: All requests here that have interface numbers as parameters 1413 * NOTE: All requests here that have interface numbers as parameters
1327 * are assuming that somehow the configuration has been prevented from 1414 * are assuming that somehow the configuration has been prevented from
@@ -1422,6 +1509,10 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
1422 ret = proc_reapurbnonblock_compat(ps, p); 1509 ret = proc_reapurbnonblock_compat(ps, p);
1423 break; 1510 break;
1424 1511
1512 case USBDEVFS_IOCTL32:
1513 snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__);
1514 ret = proc_ioctl_compat(ps, p);
1515 break;
1425#endif 1516#endif
1426 1517
1427 case USBDEVFS_DISCARDURB: 1518 case USBDEVFS_DISCARDURB:
@@ -1456,7 +1547,7 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
1456 1547
1457 case USBDEVFS_IOCTL: 1548 case USBDEVFS_IOCTL:
1458 snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__); 1549 snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__);
1459 ret = proc_ioctl(ps, p); 1550 ret = proc_ioctl_default(ps, p);
1460 break; 1551 break;
1461 } 1552 }
1462 usb_unlock_device(dev); 1553 usb_unlock_device(dev);
@@ -1488,24 +1579,7 @@ struct file_operations usbfs_device_file_operations = {
1488 .release = usbdev_release, 1579 .release = usbdev_release,
1489}; 1580};
1490 1581
1491struct usb_device *usbdev_lookup_minor(int minor) 1582static void usbdev_add(struct usb_device *dev)
1492{
1493 struct class_device *class_dev;
1494 struct usb_device *dev = NULL;
1495
1496 down(&usb_device_class->sem);
1497 list_for_each_entry(class_dev, &usb_device_class->children, node) {
1498 if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
1499 dev = class_dev->class_data;
1500 break;
1501 }
1502 }
1503 up(&usb_device_class->sem);
1504
1505 return dev;
1506};
1507
1508void usbdev_add(struct usb_device *dev)
1509{ 1583{
1510 int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1); 1584 int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1);
1511 1585
@@ -1516,11 +1590,29 @@ void usbdev_add(struct usb_device *dev)
1516 dev->class_dev->class_data = dev; 1590 dev->class_dev->class_data = dev;
1517} 1591}
1518 1592
1519void usbdev_remove(struct usb_device *dev) 1593static void usbdev_remove(struct usb_device *dev)
1520{ 1594{
1521 class_device_unregister(dev->class_dev); 1595 class_device_unregister(dev->class_dev);
1522} 1596}
1523 1597
1598static int usbdev_notify(struct notifier_block *self, unsigned long action,
1599 void *dev)
1600{
1601 switch (action) {
1602 case USB_DEVICE_ADD:
1603 usbdev_add(dev);
1604 break;
1605 case USB_DEVICE_REMOVE:
1606 usbdev_remove(dev);
1607 break;
1608 }
1609 return NOTIFY_OK;
1610}
1611
1612static struct notifier_block usbdev_nb = {
1613 .notifier_call = usbdev_notify,
1614};
1615
1524static struct cdev usb_device_cdev = { 1616static struct cdev usb_device_cdev = {
1525 .kobj = {.name = "usb_device", }, 1617 .kobj = {.name = "usb_device", },
1526 .owner = THIS_MODULE, 1618 .owner = THIS_MODULE,
@@ -1540,24 +1632,32 @@ int __init usbdev_init(void)
1540 retval = cdev_add(&usb_device_cdev, USB_DEVICE_DEV, USB_DEVICE_MAX); 1632 retval = cdev_add(&usb_device_cdev, USB_DEVICE_DEV, USB_DEVICE_MAX);
1541 if (retval) { 1633 if (retval) {
1542 err("unable to get usb_device major %d", USB_DEVICE_MAJOR); 1634 err("unable to get usb_device major %d", USB_DEVICE_MAJOR);
1543 unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX); 1635 goto error_cdev;
1544 goto out;
1545 } 1636 }
1546 usb_device_class = class_create(THIS_MODULE, "usb_device"); 1637 usb_device_class = class_create(THIS_MODULE, "usb_device");
1547 if (IS_ERR(usb_device_class)) { 1638 if (IS_ERR(usb_device_class)) {
1548 err("unable to register usb_device class"); 1639 err("unable to register usb_device class");
1549 retval = PTR_ERR(usb_device_class); 1640 retval = PTR_ERR(usb_device_class);
1550 usb_device_class = NULL; 1641 goto error_class;
1551 cdev_del(&usb_device_cdev);
1552 unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
1553 } 1642 }
1554 1643
1644 usb_register_notify(&usbdev_nb);
1645
1555out: 1646out:
1556 return retval; 1647 return retval;
1648
1649error_class:
1650 usb_device_class = NULL;
1651 cdev_del(&usb_device_cdev);
1652
1653error_cdev:
1654 unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
1655 goto out;
1557} 1656}
1558 1657
1559void usbdev_cleanup(void) 1658void usbdev_cleanup(void)
1560{ 1659{
1660 usb_unregister_notify(&usbdev_nb);
1561 class_destroy(usb_device_class); 1661 class_destroy(usb_device_class);
1562 cdev_del(&usb_device_cdev); 1662 cdev_del(&usb_device_cdev);
1563 unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX); 1663 unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 78cb4be9529f..e695308095ae 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -17,7 +17,6 @@
17 17
18#include <linux/config.h> 18#include <linux/config.h>
19#include <linux/module.h> 19#include <linux/module.h>
20#include <linux/devfs_fs_kernel.h>
21#include <linux/spinlock.h> 20#include <linux/spinlock.h>
22#include <linux/errno.h> 21#include <linux/errno.h>
23 22
@@ -88,8 +87,6 @@ int usb_major_init(void)
88 goto out; 87 goto out;
89 } 88 }
90 89
91 devfs_mk_dir("usb");
92
93out: 90out:
94 return error; 91 return error;
95} 92}
@@ -97,7 +94,6 @@ out:
97void usb_major_cleanup(void) 94void usb_major_cleanup(void)
98{ 95{
99 class_destroy(usb_class); 96 class_destroy(usb_class);
100 devfs_remove("usb");
101 unregister_chrdev(USB_MAJOR, "usb"); 97 unregister_chrdev(USB_MAJOR, "usb");
102} 98}
103 99
@@ -112,8 +108,7 @@ void usb_major_cleanup(void)
112 * enabled, the minor number will be based on the next available free minor, 108 * enabled, the minor number will be based on the next available free minor,
113 * starting at the class_driver->minor_base. 109 * starting at the class_driver->minor_base.
114 * 110 *
115 * This function also creates the devfs file for the usb device, if devfs 111 * This function also creates a usb class device in the sysfs tree.
116 * is enabled, and creates a usb class device in the sysfs tree.
117 * 112 *
118 * usb_deregister_dev() must be called when the driver is done with 113 * usb_deregister_dev() must be called when the driver is done with
119 * the minor numbers given out by this function. 114 * the minor numbers given out by this function.
@@ -162,11 +157,8 @@ int usb_register_dev(struct usb_interface *intf,
162 157
163 intf->minor = minor; 158 intf->minor = minor;
164 159
165 /* handle the devfs registration */
166 snprintf(name, BUS_ID_SIZE, class_driver->name, minor - minor_base);
167 devfs_mk_cdev(MKDEV(USB_MAJOR, minor), class_driver->mode, name);
168
169 /* create a usb class device for this usb interface */ 160 /* create a usb class device for this usb interface */
161 snprintf(name, BUS_ID_SIZE, class_driver->name, minor - minor_base);
170 temp = strrchr(name, '/'); 162 temp = strrchr(name, '/');
171 if (temp && (temp[1] != 0x00)) 163 if (temp && (temp[1] != 0x00))
172 ++temp; 164 ++temp;
@@ -179,7 +171,6 @@ int usb_register_dev(struct usb_interface *intf,
179 spin_lock (&minor_lock); 171 spin_lock (&minor_lock);
180 usb_minors[intf->minor] = NULL; 172 usb_minors[intf->minor] = NULL;
181 spin_unlock (&minor_lock); 173 spin_unlock (&minor_lock);
182 devfs_remove (name);
183 retval = PTR_ERR(intf->class_dev); 174 retval = PTR_ERR(intf->class_dev);
184 } 175 }
185exit: 176exit:
@@ -197,9 +188,8 @@ EXPORT_SYMBOL(usb_register_dev);
197 * call to usb_register_dev() (usually when the device is disconnected 188 * call to usb_register_dev() (usually when the device is disconnected
198 * from the system.) 189 * from the system.)
199 * 190 *
200 * This function also cleans up the devfs file for the usb device, if devfs 191 * This function also removes the usb class device from the sysfs tree.
201 * is enabled, and removes the usb class device from the sysfs tree. 192 *
202 *
203 * This should be called by all drivers that use the USB major number. 193 * This should be called by all drivers that use the USB major number.
204 */ 194 */
205void usb_deregister_dev(struct usb_interface *intf, 195void usb_deregister_dev(struct usb_interface *intf,
@@ -222,7 +212,6 @@ void usb_deregister_dev(struct usb_interface *intf,
222 spin_unlock (&minor_lock); 212 spin_unlock (&minor_lock);
223 213
224 snprintf(name, BUS_ID_SIZE, class_driver->name, intf->minor - minor_base); 214 snprintf(name, BUS_ID_SIZE, class_driver->name, intf->minor - minor_base);
225 devfs_remove (name);
226 class_device_destroy(usb_class, MKDEV(USB_MAJOR, intf->minor)); 215 class_device_destroy(usb_class, MKDEV(USB_MAJOR, intf->minor));
227 intf->class_dev = NULL; 216 intf->class_dev = NULL;
228 intf->minor = -1; 217 intf->minor = -1;
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 6385d1a99b60..84d9e69329bb 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -30,6 +30,8 @@
30#include <asm/io.h> 30#include <asm/io.h>
31#include <asm/irq.h> 31#include <asm/irq.h>
32#include <linux/usb.h> 32#include <linux/usb.h>
33
34#include "usb.h"
33#include "hcd.h" 35#include "hcd.h"
34 36
35 37
@@ -197,6 +199,26 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
197 199
198 hcd = pci_get_drvdata(dev); 200 hcd = pci_get_drvdata(dev);
199 201
202 /* Root hub suspend should have stopped all downstream traffic,
203 * and all bus master traffic. And done so for both the interface
204 * and the stub usb_device (which we check here). But maybe it
205 * didn't; writing sysfs power/state files ignores such rules...
206 *
207 * We must ignore the FREEZE vs SUSPEND distinction here, because
208 * otherwise the swsusp will save (and restore) garbage state.
209 */
210 if (hcd->self.root_hub->dev.power.power_state.event == PM_EVENT_ON)
211 return -EBUSY;
212
213 if (hcd->driver->suspend) {
214 retval = hcd->driver->suspend(hcd, message);
215 if (retval) {
216 dev_dbg (&dev->dev, "PCI pre-suspend fail, %d\n",
217 retval);
218 goto done;
219 }
220 }
221
200 /* FIXME until the generic PM interfaces change a lot more, this 222 /* FIXME until the generic PM interfaces change a lot more, this
201 * can't use PCI D1 and D2 states. For example, the confusion 223 * can't use PCI D1 and D2 states. For example, the confusion
202 * between messages and states will need to vanish, and messages 224 * between messages and states will need to vanish, and messages
@@ -215,31 +237,13 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
215 */ 237 */
216 has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM); 238 has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
217 239
218 switch (hcd->state) { 240 /* Downstream ports from this root hub should already be quiesced, so
219 241 * there will be no DMA activity. Now we can shut down the upstream
220 /* entry if root hub wasn't yet suspended ... from sysfs, 242 * link (except maybe for PME# resume signaling) and enter some PCI
221 * without autosuspend, or if USB_SUSPEND isn't configured. 243 * low power state, if the hardware allows.
222 */ 244 */
223 case HC_STATE_RUNNING: 245 if (hcd->state == HC_STATE_SUSPENDED) {
224 hcd->state = HC_STATE_QUIESCING;
225 retval = hcd->driver->suspend (hcd, message);
226 if (retval) {
227 dev_dbg (hcd->self.controller,
228 "suspend fail, retval %d\n",
229 retval);
230 break;
231 }
232 hcd->state = HC_STATE_SUSPENDED;
233 /* FALLTHROUGH */
234 246
235 /* entry with CONFIG_USB_SUSPEND, or hcds that autosuspend: the
236 * controller and/or root hub will already have been suspended,
237 * but it won't be ready for a PCI resume call.
238 *
239 * FIXME only CONFIG_USB_SUSPEND guarantees hub_suspend() will
240 * have been called, otherwise root hub timers still run ...
241 */
242 case HC_STATE_SUSPENDED:
243 /* no DMA or IRQs except when HC is active */ 247 /* no DMA or IRQs except when HC is active */
244 if (dev->current_state == PCI_D0) { 248 if (dev->current_state == PCI_D0) {
245 pci_save_state (dev); 249 pci_save_state (dev);
@@ -248,7 +252,7 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
248 252
249 if (!has_pci_pm) { 253 if (!has_pci_pm) {
250 dev_dbg (hcd->self.controller, "--> PCI D0/legacy\n"); 254 dev_dbg (hcd->self.controller, "--> PCI D0/legacy\n");
251 break; 255 goto done;
252 } 256 }
253 257
254 /* NOTE: dev->current_state becomes nonzero only here, and 258 /* NOTE: dev->current_state becomes nonzero only here, and
@@ -259,28 +263,29 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
259 retval = pci_set_power_state (dev, PCI_D3hot); 263 retval = pci_set_power_state (dev, PCI_D3hot);
260 if (retval == 0) { 264 if (retval == 0) {
261 dev_dbg (hcd->self.controller, "--> PCI D3\n"); 265 dev_dbg (hcd->self.controller, "--> PCI D3\n");
262 retval = pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup); 266
263 if (retval) 267 /* Ignore these return values. We rely on pci code to
264 break; 268 * reject requests the hardware can't implement, rather
265 retval = pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup); 269 * than coding the same thing.
266 } else if (retval < 0) { 270 */
271 (void) pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup);
272 (void) pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup);
273 } else {
267 dev_dbg (&dev->dev, "PCI D3 suspend fail, %d\n", 274 dev_dbg (&dev->dev, "PCI D3 suspend fail, %d\n",
268 retval); 275 retval);
269 (void) usb_hcd_pci_resume (dev); 276 (void) usb_hcd_pci_resume (dev);
270 break;
271 } 277 }
272 break; 278
273 default: 279 } else {
274 dev_dbg (hcd->self.controller, "hcd state %d; not suspended\n", 280 dev_dbg (hcd->self.controller, "hcd state %d; not suspended\n",
275 hcd->state); 281 hcd->state);
276 WARN_ON(1); 282 WARN_ON(1);
277 retval = -EINVAL; 283 retval = -EINVAL;
278 break;
279 } 284 }
280 285
281 /* update power_state **ONLY** to make sysfs happier */ 286done:
282 if (retval == 0) 287 if (retval == 0)
283 dev->dev.power.power_state = message; 288 dev->dev.power.power_state = PMSG_SUSPEND;
284 return retval; 289 return retval;
285} 290}
286EXPORT_SYMBOL (usb_hcd_pci_suspend); 291EXPORT_SYMBOL (usb_hcd_pci_suspend);
@@ -336,20 +341,9 @@ int usb_hcd_pci_resume (struct pci_dev *dev)
336 dev->current_state); 341 dev->current_state);
337 } 342 }
338#endif 343#endif
339 retval = pci_enable_wake (dev, dev->current_state, 0); 344 /* yes, ignore these results too... */
340 if (retval) { 345 (void) pci_enable_wake (dev, dev->current_state, 0);
341 dev_err(hcd->self.controller, 346 (void) pci_enable_wake (dev, PCI_D3cold, 0);
342 "can't enable_wake to %d, %d!\n",
343 dev->current_state, retval);
344 return retval;
345 }
346 retval = pci_enable_wake (dev, PCI_D3cold, 0);
347 if (retval) {
348 dev_err(hcd->self.controller,
349 "can't enable_wake to %d, %d!\n",
350 PCI_D3cold, retval);
351 return retval;
352 }
353 } else { 347 } else {
354 /* Same basic cases: clean (powered/not), dirty */ 348 /* Same basic cases: clean (powered/not), dirty */
355 dev_dbg(hcd->self.controller, "PCI legacy resume\n"); 349 dev_dbg(hcd->self.controller, "PCI legacy resume\n");
@@ -371,17 +365,17 @@ int usb_hcd_pci_resume (struct pci_dev *dev)
371 365
372 dev->dev.power.power_state = PMSG_ON; 366 dev->dev.power.power_state = PMSG_ON;
373 367
374 hcd->state = HC_STATE_RESUMING;
375 hcd->saw_irq = 0; 368 hcd->saw_irq = 0;
376 369
377 retval = hcd->driver->resume (hcd); 370 if (hcd->driver->resume) {
378 if (!HC_IS_RUNNING (hcd->state)) { 371 retval = hcd->driver->resume(hcd);
379 dev_dbg (hcd->self.controller, 372 if (retval) {
380 "resume fail, retval %d\n", retval); 373 dev_err (hcd->self.controller,
381 usb_hc_died (hcd); 374 "PCI post-resume error %d!\n", retval);
375 usb_hc_died (hcd);
376 }
382 } 377 }
383 378
384 retval = pci_enable_device(dev);
385 return retval; 379 return retval;
386} 380}
387EXPORT_SYMBOL (usb_hcd_pci_resume); 381EXPORT_SYMBOL (usb_hcd_pci_resume);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 14c47a10da86..6c7ca5b08cd6 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -130,7 +130,7 @@ static const u8 usb2_rh_dev_descriptor [18] = {
130 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ 130 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
131 0x00, /* __u8 bDeviceSubClass; */ 131 0x00, /* __u8 bDeviceSubClass; */
132 0x01, /* __u8 bDeviceProtocol; [ usb 2.0 single TT ]*/ 132 0x01, /* __u8 bDeviceProtocol; [ usb 2.0 single TT ]*/
133 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ 133 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
134 134
135 0x00, 0x00, /* __le16 idVendor; */ 135 0x00, 0x00, /* __le16 idVendor; */
136 0x00, 0x00, /* __le16 idProduct; */ 136 0x00, 0x00, /* __le16 idProduct; */
@@ -153,7 +153,7 @@ static const u8 usb11_rh_dev_descriptor [18] = {
153 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ 153 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
154 0x00, /* __u8 bDeviceSubClass; */ 154 0x00, /* __u8 bDeviceSubClass; */
155 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */ 155 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
156 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ 156 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
157 157
158 0x00, 0x00, /* __le16 idVendor; */ 158 0x00, 0x00, /* __le16 idVendor; */
159 0x00, 0x00, /* __le16 idProduct; */ 159 0x00, 0x00, /* __le16 idProduct; */
@@ -458,22 +458,18 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
458 458
459 default: 459 default:
460 /* non-generic request */ 460 /* non-generic request */
461 if (HC_IS_SUSPENDED (hcd->state)) 461 switch (typeReq) {
462 status = -EAGAIN; 462 case GetHubStatus:
463 else { 463 case GetPortStatus:
464 switch (typeReq) { 464 len = 4;
465 case GetHubStatus: 465 break;
466 case GetPortStatus: 466 case GetHubDescriptor:
467 len = 4; 467 len = sizeof (struct usb_hub_descriptor);
468 break; 468 break;
469 case GetHubDescriptor:
470 len = sizeof (struct usb_hub_descriptor);
471 break;
472 }
473 status = hcd->driver->hub_control (hcd,
474 typeReq, wValue, wIndex,
475 tbuf, wLength);
476 } 469 }
470 status = hcd->driver->hub_control (hcd,
471 typeReq, wValue, wIndex,
472 tbuf, wLength);
477 break; 473 break;
478error: 474error:
479 /* "protocol stall" on error */ 475 /* "protocol stall" on error */
@@ -487,7 +483,7 @@ error:
487 "CTRL: TypeReq=0x%x val=0x%x " 483 "CTRL: TypeReq=0x%x val=0x%x "
488 "idx=0x%x len=%d ==> %d\n", 484 "idx=0x%x len=%d ==> %d\n",
489 typeReq, wValue, wIndex, 485 typeReq, wValue, wIndex,
490 wLength, urb->status); 486 wLength, status);
491 } 487 }
492 } 488 }
493 if (len) { 489 if (len) {
@@ -748,10 +744,9 @@ struct usb_bus *usb_alloc_bus (struct usb_operations *op)
748{ 744{
749 struct usb_bus *bus; 745 struct usb_bus *bus;
750 746
751 bus = kmalloc (sizeof *bus, GFP_KERNEL); 747 bus = kzalloc (sizeof *bus, GFP_KERNEL);
752 if (!bus) 748 if (!bus)
753 return NULL; 749 return NULL;
754 memset(bus, 0, sizeof(struct usb_bus));
755 usb_bus_init (bus); 750 usb_bus_init (bus);
756 bus->op = op; 751 bus->op = op;
757 return bus; 752 return bus;
@@ -796,8 +791,7 @@ static int usb_register_bus(struct usb_bus *bus)
796 list_add (&bus->bus_list, &usb_bus_list); 791 list_add (&bus->bus_list, &usb_bus_list);
797 up (&usb_bus_list_lock); 792 up (&usb_bus_list_lock);
798 793
799 usbfs_add_bus (bus); 794 usb_notify_add_bus(bus);
800 usbmon_notify_bus_add (bus);
801 795
802 dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum); 796 dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum);
803 return 0; 797 return 0;
@@ -824,8 +818,7 @@ static void usb_deregister_bus (struct usb_bus *bus)
824 list_del (&bus->bus_list); 818 list_del (&bus->bus_list);
825 up (&usb_bus_list_lock); 819 up (&usb_bus_list_lock);
826 820
827 usbmon_notify_bus_remove (bus); 821 usb_notify_remove_bus(bus);
828 usbfs_remove_bus (bus);
829 822
830 clear_bit (bus->busnum, busmap.busmap); 823 clear_bit (bus->busnum, busmap.busmap);
831 824
@@ -1143,10 +1136,20 @@ static int hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
1143 else switch (hcd->state) { 1136 else switch (hcd->state) {
1144 case HC_STATE_RUNNING: 1137 case HC_STATE_RUNNING:
1145 case HC_STATE_RESUMING: 1138 case HC_STATE_RESUMING:
1139doit:
1146 usb_get_dev (urb->dev); 1140 usb_get_dev (urb->dev);
1147 list_add_tail (&urb->urb_list, &ep->urb_list); 1141 list_add_tail (&urb->urb_list, &ep->urb_list);
1148 status = 0; 1142 status = 0;
1149 break; 1143 break;
1144 case HC_STATE_SUSPENDED:
1145 /* HC upstream links (register access, wakeup signaling) can work
1146 * even when the downstream links (and DMA etc) are quiesced; let
1147 * usbcore talk to the root hub.
1148 */
1149 if (hcd->self.controller->power.power_state.event == PM_EVENT_ON
1150 && urb->dev->parent == NULL)
1151 goto doit;
1152 /* FALL THROUGH */
1150 default: 1153 default:
1151 status = -ESHUTDOWN; 1154 status = -ESHUTDOWN;
1152 break; 1155 break;
@@ -1294,12 +1297,6 @@ static int hcd_unlink_urb (struct urb *urb, int status)
1294 goto done; 1297 goto done;
1295 } 1298 }
1296 1299
1297 /* running ~= hc unlink handshake works (irq, timer, etc)
1298 * halted ~= no unlink handshake is needed
1299 * suspended, resuming == should never happen
1300 */
1301 WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT);
1302
1303 /* insist the urb is still queued */ 1300 /* insist the urb is still queued */
1304 list_for_each(tmp, &ep->urb_list) { 1301 list_for_each(tmp, &ep->urb_list) {
1305 if (tmp == &urb->urb_list) 1302 if (tmp == &urb->urb_list)
@@ -1431,28 +1428,92 @@ rescan:
1431 1428
1432/*-------------------------------------------------------------------------*/ 1429/*-------------------------------------------------------------------------*/
1433 1430
1434#ifdef CONFIG_USB_SUSPEND 1431#ifdef CONFIG_PM
1435 1432
1436static int hcd_hub_suspend (struct usb_bus *bus) 1433int hcd_bus_suspend (struct usb_bus *bus)
1437{ 1434{
1438 struct usb_hcd *hcd; 1435 struct usb_hcd *hcd;
1436 int status;
1439 1437
1440 hcd = container_of (bus, struct usb_hcd, self); 1438 hcd = container_of (bus, struct usb_hcd, self);
1441 if (hcd->driver->hub_suspend) 1439 if (!hcd->driver->bus_suspend)
1442 return hcd->driver->hub_suspend (hcd); 1440 return -ENOENT;
1443 return 0; 1441 hcd->state = HC_STATE_QUIESCING;
1442 status = hcd->driver->bus_suspend (hcd);
1443 if (status == 0)
1444 hcd->state = HC_STATE_SUSPENDED;
1445 else
1446 dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n",
1447 "suspend", status);
1448 return status;
1444} 1449}
1445 1450
1446static int hcd_hub_resume (struct usb_bus *bus) 1451int hcd_bus_resume (struct usb_bus *bus)
1447{ 1452{
1448 struct usb_hcd *hcd; 1453 struct usb_hcd *hcd;
1454 int status;
1449 1455
1450 hcd = container_of (bus, struct usb_hcd, self); 1456 hcd = container_of (bus, struct usb_hcd, self);
1451 if (hcd->driver->hub_resume) 1457 if (!hcd->driver->bus_resume)
1452 return hcd->driver->hub_resume (hcd); 1458 return -ENOENT;
1453 return 0; 1459 if (hcd->state == HC_STATE_RUNNING)
1460 return 0;
1461 hcd->state = HC_STATE_RESUMING;
1462 status = hcd->driver->bus_resume (hcd);
1463 if (status == 0)
1464 hcd->state = HC_STATE_RUNNING;
1465 else {
1466 dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n",
1467 "resume", status);
1468 usb_hc_died(hcd);
1469 }
1470 return status;
1454} 1471}
1455 1472
1473/*
1474 * usb_hcd_suspend_root_hub - HCD autosuspends downstream ports
1475 * @hcd: host controller for this root hub
1476 *
1477 * This call arranges that usb_hcd_resume_root_hub() is safe to call later;
1478 * that the HCD's root hub polling is deactivated; and that the root's hub
1479 * driver is suspended. HCDs may call this to autosuspend when their root
1480 * hub's downstream ports are all inactive: unpowered, disconnected,
1481 * disabled, or suspended.
1482 *
1483 * The HCD will autoresume on device connect change detection (using SRP
1484 * or a D+/D- pullup). The HCD also autoresumes on remote wakeup signaling
1485 * from any ports that are suspended (if that is enabled). In most cases,
1486 * overcurrent signaling (on powered ports) will also start autoresume.
1487 *
1488 * Always called with IRQs blocked.
1489 */
1490void usb_hcd_suspend_root_hub (struct usb_hcd *hcd)
1491{
1492 struct urb *urb;
1493
1494 spin_lock (&hcd_root_hub_lock);
1495 usb_suspend_root_hub (hcd->self.root_hub);
1496
1497 /* force status urb to complete/unlink while suspended */
1498 if (hcd->status_urb) {
1499 urb = hcd->status_urb;
1500 urb->status = -ECONNRESET;
1501 urb->hcpriv = NULL;
1502 urb->actual_length = 0;
1503
1504 del_timer (&hcd->rh_timer);
1505 hcd->poll_pending = 0;
1506 hcd->status_urb = NULL;
1507 } else
1508 urb = NULL;
1509 spin_unlock (&hcd_root_hub_lock);
1510 hcd->state = HC_STATE_SUSPENDED;
1511
1512 if (urb)
1513 usb_hcd_giveback_urb (hcd, urb, NULL);
1514}
1515EXPORT_SYMBOL_GPL(usb_hcd_suspend_root_hub);
1516
1456/** 1517/**
1457 * usb_hcd_resume_root_hub - called by HCD to resume its root hub 1518 * usb_hcd_resume_root_hub - called by HCD to resume its root hub
1458 * @hcd: host controller for this root hub 1519 * @hcd: host controller for this root hub
@@ -1460,7 +1521,7 @@ static int hcd_hub_resume (struct usb_bus *bus)
1460 * The USB host controller calls this function when its root hub is 1521 * The USB host controller calls this function when its root hub is
1461 * suspended (with the remote wakeup feature enabled) and a remote 1522 * suspended (with the remote wakeup feature enabled) and a remote
1462 * wakeup request is received. It queues a request for khubd to 1523 * wakeup request is received. It queues a request for khubd to
1463 * resume the root hub. 1524 * resume the root hub (that is, manage its downstream ports again).
1464 */ 1525 */
1465void usb_hcd_resume_root_hub (struct usb_hcd *hcd) 1526void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
1466{ 1527{
@@ -1471,13 +1532,9 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
1471 usb_resume_root_hub (hcd->self.root_hub); 1532 usb_resume_root_hub (hcd->self.root_hub);
1472 spin_unlock_irqrestore (&hcd_root_hub_lock, flags); 1533 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
1473} 1534}
1535EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
1474 1536
1475#else
1476void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
1477{
1478}
1479#endif 1537#endif
1480EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
1481 1538
1482/*-------------------------------------------------------------------------*/ 1539/*-------------------------------------------------------------------------*/
1483 1540
@@ -1530,10 +1587,6 @@ static struct usb_operations usb_hcd_operations = {
1530 .buffer_alloc = hcd_buffer_alloc, 1587 .buffer_alloc = hcd_buffer_alloc,
1531 .buffer_free = hcd_buffer_free, 1588 .buffer_free = hcd_buffer_free,
1532 .disable = hcd_endpoint_disable, 1589 .disable = hcd_endpoint_disable,
1533#ifdef CONFIG_USB_SUSPEND
1534 .hub_suspend = hcd_hub_suspend,
1535 .hub_resume = hcd_hub_resume,
1536#endif
1537}; 1590};
1538 1591
1539/*-------------------------------------------------------------------------*/ 1592/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 1f1ed6211af8..24a62a2ff86d 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -154,10 +154,6 @@ struct usb_operations {
154 154
155 void (*disable)(struct usb_device *udev, 155 void (*disable)(struct usb_device *udev,
156 struct usb_host_endpoint *ep); 156 struct usb_host_endpoint *ep);
157
158 /* global suspend/resume of bus */
159 int (*hub_suspend)(struct usb_bus *);
160 int (*hub_resume)(struct usb_bus *);
161}; 157};
162 158
163/* each driver provides one of these, and hardware init support */ 159/* each driver provides one of these, and hardware init support */
@@ -182,12 +178,12 @@ struct hc_driver {
182 int (*start) (struct usb_hcd *hcd); 178 int (*start) (struct usb_hcd *hcd);
183 179
184 /* NOTE: these suspend/resume calls relate to the HC as 180 /* NOTE: these suspend/resume calls relate to the HC as
185 * a whole, not just the root hub; they're for bus glue. 181 * a whole, not just the root hub; they're for PCI bus glue.
186 */ 182 */
187 /* called after all devices were suspended */ 183 /* called after suspending the hub, before entering D3 etc */
188 int (*suspend) (struct usb_hcd *hcd, pm_message_t message); 184 int (*suspend) (struct usb_hcd *hcd, pm_message_t message);
189 185
190 /* called before any devices get resumed */ 186 /* called after entering D0 (etc), before resuming the hub */
191 int (*resume) (struct usb_hcd *hcd); 187 int (*resume) (struct usb_hcd *hcd);
192 188
193 /* cleanly make HCD stop writing memory and doing I/O */ 189 /* cleanly make HCD stop writing memory and doing I/O */
@@ -212,8 +208,8 @@ struct hc_driver {
212 int (*hub_control) (struct usb_hcd *hcd, 208 int (*hub_control) (struct usb_hcd *hcd,
213 u16 typeReq, u16 wValue, u16 wIndex, 209 u16 typeReq, u16 wValue, u16 wIndex,
214 char *buf, u16 wLength); 210 char *buf, u16 wLength);
215 int (*hub_suspend)(struct usb_hcd *); 211 int (*bus_suspend)(struct usb_hcd *);
216 int (*hub_resume)(struct usb_hcd *); 212 int (*bus_resume)(struct usb_hcd *);
217 int (*start_port_reset)(struct usb_hcd *, unsigned port_num); 213 int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
218 void (*hub_irq_enable)(struct usb_hcd *); 214 void (*hub_irq_enable)(struct usb_hcd *);
219 /* Needed only if port-change IRQs are level-triggered */ 215 /* Needed only if port-change IRQs are level-triggered */
@@ -355,8 +351,6 @@ extern long usb_calc_bus_time (int speed, int is_input,
355 351
356extern struct usb_bus *usb_alloc_bus (struct usb_operations *); 352extern struct usb_bus *usb_alloc_bus (struct usb_operations *);
357 353
358extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd);
359
360extern void usb_set_device_state(struct usb_device *udev, 354extern void usb_set_device_state(struct usb_device *udev,
361 enum usb_device_state new_state); 355 enum usb_device_state new_state);
362 356
@@ -378,6 +372,33 @@ extern int usb_find_interface_driver (struct usb_device *dev,
378 372
379#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) 373#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
380 374
375#ifdef CONFIG_PM
376extern void usb_hcd_suspend_root_hub (struct usb_hcd *hcd);
377extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd);
378extern int hcd_bus_suspend (struct usb_bus *bus);
379extern int hcd_bus_resume (struct usb_bus *bus);
380#else
381static inline void usb_hcd_suspend_root_hub(struct usb_hcd *hcd)
382{
383 return;
384}
385
386static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
387{
388 return;
389}
390
391static inline int hcd_bus_suspend(struct usb_bus *bus)
392{
393 return 0;
394}
395
396static inline int hcd_bus_resume (struct usb_bus *bus)
397{
398 return 0;
399}
400#endif /* CONFIG_PM */
401
381/* 402/*
382 * USB device fs stuff 403 * USB device fs stuff
383 */ 404 */
@@ -388,23 +409,13 @@ extern int usb_find_interface_driver (struct usb_device *dev,
388 * these are expected to be called from the USB core/hub thread 409 * these are expected to be called from the USB core/hub thread
389 * with the kernel lock held 410 * with the kernel lock held
390 */ 411 */
391extern void usbfs_add_bus(struct usb_bus *bus);
392extern void usbfs_remove_bus(struct usb_bus *bus);
393extern void usbfs_add_device(struct usb_device *dev);
394extern void usbfs_remove_device(struct usb_device *dev);
395extern void usbfs_update_special (void); 412extern void usbfs_update_special (void);
396
397extern int usbfs_init(void); 413extern int usbfs_init(void);
398extern void usbfs_cleanup(void); 414extern void usbfs_cleanup(void);
399 415
400#else /* CONFIG_USB_DEVICEFS */ 416#else /* CONFIG_USB_DEVICEFS */
401 417
402static inline void usbfs_add_bus(struct usb_bus *bus) {}
403static inline void usbfs_remove_bus(struct usb_bus *bus) {}
404static inline void usbfs_add_device(struct usb_device *dev) {}
405static inline void usbfs_remove_device(struct usb_device *dev) {}
406static inline void usbfs_update_special (void) {} 418static inline void usbfs_update_special (void) {}
407
408static inline int usbfs_init(void) { return 0; } 419static inline int usbfs_init(void) { return 0; }
409static inline void usbfs_cleanup(void) { } 420static inline void usbfs_cleanup(void) { }
410 421
@@ -419,8 +430,6 @@ struct usb_mon_operations {
419 void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err); 430 void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
420 void (*urb_complete)(struct usb_bus *bus, struct urb *urb); 431 void (*urb_complete)(struct usb_bus *bus, struct urb *urb);
421 /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */ 432 /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
422 void (*bus_add)(struct usb_bus *bus);
423 void (*bus_remove)(struct usb_bus *bus);
424}; 433};
425 434
426extern struct usb_mon_operations *mon_ops; 435extern struct usb_mon_operations *mon_ops;
@@ -443,18 +452,6 @@ static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb)
443 if (bus->monitored) 452 if (bus->monitored)
444 (*mon_ops->urb_complete)(bus, urb); 453 (*mon_ops->urb_complete)(bus, urb);
445} 454}
446
447static inline void usbmon_notify_bus_add(struct usb_bus *bus)
448{
449 if (mon_ops)
450 (*mon_ops->bus_add)(bus);
451}
452
453static inline void usbmon_notify_bus_remove(struct usb_bus *bus)
454{
455 if (mon_ops)
456 (*mon_ops->bus_remove)(bus);
457}
458 455
459int usb_mon_register(struct usb_mon_operations *ops); 456int usb_mon_register(struct usb_mon_operations *ops);
460void usb_mon_deregister(void); 457void usb_mon_deregister(void);
@@ -465,8 +462,6 @@ static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
465static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb, 462static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
466 int error) {} 463 int error) {}
467static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) {} 464static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) {}
468static inline void usbmon_notify_bus_add(struct usb_bus *bus) {}
469static inline void usbmon_notify_bus_remove(struct usb_bus *bus) {}
470 465
471#endif /* CONFIG_USB_MON */ 466#endif /* CONFIG_USB_MON */
472 467
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c3e2024c4347..256d9f698715 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -436,9 +436,10 @@ static void hub_power_on(struct usb_hub *hub)
436{ 436{
437 int port1; 437 int port1;
438 unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2; 438 unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2;
439 u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
439 440
440 /* if hub supports power switching, enable power on each port */ 441 /* if hub supports power switching, enable power on each port */
441 if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) < 2) { 442 if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2) {
442 dev_dbg(hub->intfdev, "enabling power on all ports\n"); 443 dev_dbg(hub->intfdev, "enabling power on all ports\n");
443 for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++) 444 for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++)
444 set_port_feature(hub->hdev, port1, 445 set_port_feature(hub->hdev, port1,
@@ -449,10 +450,18 @@ static void hub_power_on(struct usb_hub *hub)
449 msleep(max(pgood_delay, (unsigned) 100)); 450 msleep(max(pgood_delay, (unsigned) 100));
450} 451}
451 452
452static void hub_quiesce(struct usb_hub *hub) 453static inline void __hub_quiesce(struct usb_hub *hub)
453{ 454{
454 /* stop khubd and related activity */ 455 /* (nonblocking) khubd and related activity won't re-trigger */
455 hub->quiescing = 1; 456 hub->quiescing = 1;
457 hub->activating = 0;
458 hub->resume_root_hub = 0;
459}
460
461static void hub_quiesce(struct usb_hub *hub)
462{
463 /* (blocking) stop khubd and related activity */
464 __hub_quiesce(hub);
456 usb_kill_urb(hub->urb); 465 usb_kill_urb(hub->urb);
457 if (hub->has_indicators) 466 if (hub->has_indicators)
458 cancel_delayed_work(&hub->leds); 467 cancel_delayed_work(&hub->leds);
@@ -466,6 +475,7 @@ static void hub_activate(struct usb_hub *hub)
466 475
467 hub->quiescing = 0; 476 hub->quiescing = 0;
468 hub->activating = 1; 477 hub->activating = 1;
478 hub->resume_root_hub = 0;
469 status = usb_submit_urb(hub->urb, GFP_NOIO); 479 status = usb_submit_urb(hub->urb, GFP_NOIO);
470 if (status < 0) 480 if (status < 0)
471 dev_err(hub->intfdev, "activate --> %d\n", status); 481 dev_err(hub->intfdev, "activate --> %d\n", status);
@@ -516,6 +526,7 @@ static int hub_configure(struct usb_hub *hub,
516 struct usb_device *hdev = hub->hdev; 526 struct usb_device *hdev = hub->hdev;
517 struct device *hub_dev = hub->intfdev; 527 struct device *hub_dev = hub->intfdev;
518 u16 hubstatus, hubchange; 528 u16 hubstatus, hubchange;
529 u16 wHubCharacteristics;
519 unsigned int pipe; 530 unsigned int pipe;
520 int maxp, ret; 531 int maxp, ret;
521 char *message; 532 char *message;
@@ -561,9 +572,9 @@ static int hub_configure(struct usb_hub *hub,
561 dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild, 572 dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild,
562 (hdev->maxchild == 1) ? "" : "s"); 573 (hdev->maxchild == 1) ? "" : "s");
563 574
564 le16_to_cpus(&hub->descriptor->wHubCharacteristics); 575 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
565 576
566 if (hub->descriptor->wHubCharacteristics & HUB_CHAR_COMPOUND) { 577 if (wHubCharacteristics & HUB_CHAR_COMPOUND) {
567 int i; 578 int i;
568 char portstr [USB_MAXCHILDREN + 1]; 579 char portstr [USB_MAXCHILDREN + 1];
569 580
@@ -576,7 +587,7 @@ static int hub_configure(struct usb_hub *hub,
576 } else 587 } else
577 dev_dbg(hub_dev, "standalone hub\n"); 588 dev_dbg(hub_dev, "standalone hub\n");
578 589
579 switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) { 590 switch (wHubCharacteristics & HUB_CHAR_LPSM) {
580 case 0x00: 591 case 0x00:
581 dev_dbg(hub_dev, "ganged power switching\n"); 592 dev_dbg(hub_dev, "ganged power switching\n");
582 break; 593 break;
@@ -589,7 +600,7 @@ static int hub_configure(struct usb_hub *hub,
589 break; 600 break;
590 } 601 }
591 602
592 switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) { 603 switch (wHubCharacteristics & HUB_CHAR_OCPM) {
593 case 0x00: 604 case 0x00:
594 dev_dbg(hub_dev, "global over-current protection\n"); 605 dev_dbg(hub_dev, "global over-current protection\n");
595 break; 606 break;
@@ -629,7 +640,7 @@ static int hub_configure(struct usb_hub *hub,
629 } 640 }
630 641
631 /* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */ 642 /* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
632 switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_TTTT) { 643 switch (wHubCharacteristics & HUB_CHAR_TTTT) {
633 case HUB_TTTT_8_BITS: 644 case HUB_TTTT_8_BITS:
634 if (hdev->descriptor.bDeviceProtocol != 0) { 645 if (hdev->descriptor.bDeviceProtocol != 0) {
635 hub->tt.think_time = 666; 646 hub->tt.think_time = 666;
@@ -659,7 +670,7 @@ static int hub_configure(struct usb_hub *hub,
659 } 670 }
660 671
661 /* probe() zeroes hub->indicator[] */ 672 /* probe() zeroes hub->indicator[] */
662 if (hub->descriptor->wHubCharacteristics & HUB_CHAR_PORTIND) { 673 if (wHubCharacteristics & HUB_CHAR_PORTIND) {
663 hub->has_indicators = 1; 674 hub->has_indicators = 1;
664 dev_dbg(hub_dev, "Port indicators are supported\n"); 675 dev_dbg(hub_dev, "Port indicators are supported\n");
665 } 676 }
@@ -704,7 +715,7 @@ static int hub_configure(struct usb_hub *hub,
704 (hubstatus & HUB_STATUS_LOCAL_POWER) 715 (hubstatus & HUB_STATUS_LOCAL_POWER)
705 ? "lost (inactive)" : "good"); 716 ? "lost (inactive)" : "good");
706 717
707 if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) == 0) 718 if ((wHubCharacteristics & HUB_CHAR_OCPM) == 0)
708 dev_dbg(hub_dev, "%sover-current condition exists\n", 719 dev_dbg(hub_dev, "%sover-current condition exists\n",
709 (hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no "); 720 (hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no ");
710 721
@@ -854,14 +865,12 @@ descriptor_error:
854 /* We found a hub */ 865 /* We found a hub */
855 dev_info (&intf->dev, "USB hub found\n"); 866 dev_info (&intf->dev, "USB hub found\n");
856 867
857 hub = kmalloc(sizeof(*hub), GFP_KERNEL); 868 hub = kzalloc(sizeof(*hub), GFP_KERNEL);
858 if (!hub) { 869 if (!hub) {
859 dev_dbg (&intf->dev, "couldn't kmalloc hub struct\n"); 870 dev_dbg (&intf->dev, "couldn't kmalloc hub struct\n");
860 return -ENOMEM; 871 return -ENOMEM;
861 } 872 }
862 873
863 memset(hub, 0, sizeof(*hub));
864
865 INIT_LIST_HEAD(&hub->event_list); 874 INIT_LIST_HEAD(&hub->event_list);
866 hub->intfdev = &intf->dev; 875 hub->intfdev = &intf->dev;
867 hub->hdev = hdev; 876 hub->hdev = hdev;
@@ -1117,14 +1126,14 @@ void usb_disconnect(struct usb_device **pdev)
1117 */ 1126 */
1118 usb_disable_device(udev, 0); 1127 usb_disable_device(udev, 0);
1119 1128
1129 usb_notify_remove_device(udev);
1130
1120 /* Free the device number, remove the /proc/bus/usb entry and 1131 /* Free the device number, remove the /proc/bus/usb entry and
1121 * the sysfs attributes, and delete the parent's children[] 1132 * the sysfs attributes, and delete the parent's children[]
1122 * (or root_hub) pointer. 1133 * (or root_hub) pointer.
1123 */ 1134 */
1124 dev_dbg (&udev->dev, "unregistering device\n"); 1135 dev_dbg (&udev->dev, "unregistering device\n");
1125 release_address(udev); 1136 release_address(udev);
1126 usbfs_remove_device(udev);
1127 usbdev_remove(udev);
1128 usb_remove_sysfs_dev_files(udev); 1137 usb_remove_sysfs_dev_files(udev);
1129 1138
1130 /* Avoid races with recursively_mark_NOTATTACHED() */ 1139 /* Avoid races with recursively_mark_NOTATTACHED() */
@@ -1195,21 +1204,6 @@ static inline void show_string(struct usb_device *udev, char *id, char *string)
1195{} 1204{}
1196#endif 1205#endif
1197 1206
1198static void get_string(struct usb_device *udev, char **string, int index)
1199{
1200 char *buf;
1201
1202 if (!index)
1203 return;
1204 buf = kmalloc(256, GFP_KERNEL);
1205 if (!buf)
1206 return;
1207 if (usb_string(udev, index, buf, 256) > 0)
1208 *string = buf;
1209 else
1210 kfree(buf);
1211}
1212
1213 1207
1214#ifdef CONFIG_USB_OTG 1208#ifdef CONFIG_USB_OTG
1215#include "otg_whitelist.h" 1209#include "otg_whitelist.h"
@@ -1248,9 +1242,10 @@ int usb_new_device(struct usb_device *udev)
1248 } 1242 }
1249 1243
1250 /* read the standard strings and cache them if present */ 1244 /* read the standard strings and cache them if present */
1251 get_string(udev, &udev->product, udev->descriptor.iProduct); 1245 udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
1252 get_string(udev, &udev->manufacturer, udev->descriptor.iManufacturer); 1246 udev->manufacturer = usb_cache_string(udev,
1253 get_string(udev, &udev->serial, udev->descriptor.iSerialNumber); 1247 udev->descriptor.iManufacturer);
1248 udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
1254 1249
1255 /* Tell the world! */ 1250 /* Tell the world! */
1256 dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, " 1251 dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, "
@@ -1322,11 +1317,9 @@ int usb_new_device(struct usb_device *udev)
1322 * (Includes HNP test device.) 1317 * (Includes HNP test device.)
1323 */ 1318 */
1324 if (udev->bus->b_hnp_enable || udev->bus->is_b_host) { 1319 if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
1325 static int __usb_suspend_device (struct usb_device *, 1320 static int __usb_suspend_device(struct usb_device *,
1326 int port1, pm_message_t state); 1321 int port1);
1327 err = __usb_suspend_device(udev, 1322 err = __usb_suspend_device(udev, udev->bus->otg_port);
1328 udev->bus->otg_port,
1329 PMSG_SUSPEND);
1330 if (err < 0) 1323 if (err < 0)
1331 dev_dbg(&udev->dev, "HNP fail, %d\n", err); 1324 dev_dbg(&udev->dev, "HNP fail, %d\n", err);
1332 } 1325 }
@@ -1362,10 +1355,8 @@ int usb_new_device(struct usb_device *udev)
1362 } 1355 }
1363 1356
1364 /* USB device state == configured ... usable */ 1357 /* USB device state == configured ... usable */
1358 usb_notify_add_device(udev);
1365 1359
1366 /* add a /proc/bus/usb entry */
1367 usbdev_add(udev);
1368 usbfs_add_device(udev);
1369 return 0; 1360 return 0;
1370 1361
1371fail: 1362fail:
@@ -1516,7 +1507,7 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
1516 /* FIXME let caller ask to power down the port: 1507 /* FIXME let caller ask to power down the port:
1517 * - some devices won't enumerate without a VBUS power cycle 1508 * - some devices won't enumerate without a VBUS power cycle
1518 * - SRP saves power that way 1509 * - SRP saves power that way
1519 * - usb_suspend_device(dev, PMSG_SUSPEND) 1510 * - ... new call, TBD ...
1520 * That's easy if this hub can switch power per-port, and 1511 * That's easy if this hub can switch power per-port, and
1521 * khubd reactivates the port later (timer, SRP, etc). 1512 * khubd reactivates the port later (timer, SRP, etc).
1522 * Powerdown must be optional, because of reset/DFU. 1513 * Powerdown must be optional, because of reset/DFU.
@@ -1598,11 +1589,14 @@ static int hub_port_suspend(struct usb_hub *hub, int port1,
1598 * Other than re-initializing the hub (plug/unplug, except for root hubs), 1589 * Other than re-initializing the hub (plug/unplug, except for root hubs),
1599 * Linux (2.6) currently has NO mechanisms to initiate that: no khubd 1590 * Linux (2.6) currently has NO mechanisms to initiate that: no khubd
1600 * timer, no SRP, no requests through sysfs. 1591 * timer, no SRP, no requests through sysfs.
1592 *
1593 * If CONFIG_USB_SUSPEND isn't enabled, devices only really suspend when
1594 * the root hub for their bus goes into global suspend ... so we don't
1595 * (falsely) update the device power state to say it suspended.
1601 */ 1596 */
1602static int __usb_suspend_device (struct usb_device *udev, int port1, 1597static int __usb_suspend_device (struct usb_device *udev, int port1)
1603 pm_message_t state)
1604{ 1598{
1605 int status; 1599 int status = 0;
1606 1600
1607 /* caller owns the udev device lock */ 1601 /* caller owns the udev device lock */
1608 if (port1 < 0) 1602 if (port1 < 0)
@@ -1613,95 +1607,39 @@ static int __usb_suspend_device (struct usb_device *udev, int port1,
1613 return 0; 1607 return 0;
1614 } 1608 }
1615 1609
1616 /* suspend interface drivers; if this is a hub, it 1610 /* all interfaces must already be suspended */
1617 * suspends the child devices
1618 */
1619 if (udev->actconfig) { 1611 if (udev->actconfig) {
1620 int i; 1612 int i;
1621 1613
1622 for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { 1614 for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
1623 struct usb_interface *intf; 1615 struct usb_interface *intf;
1624 struct usb_driver *driver;
1625 1616
1626 intf = udev->actconfig->interface[i]; 1617 intf = udev->actconfig->interface[i];
1627 if (state.event <= intf->dev.power.power_state.event) 1618 if (is_active(intf)) {
1628 continue; 1619 dev_dbg(&intf->dev, "nyet suspended\n");
1629 if (!intf->dev.driver) 1620 return -EBUSY;
1630 continue;
1631 driver = to_usb_driver(intf->dev.driver);
1632
1633 if (driver->suspend) {
1634 status = driver->suspend(intf, state);
1635 if (intf->dev.power.power_state.event != state.event
1636 || status)
1637 dev_err(&intf->dev,
1638 "suspend %d fail, code %d\n",
1639 state.event, status);
1640 }
1641
1642 /* only drivers with suspend() can ever resume();
1643 * and after power loss, even they won't.
1644 * bus_rescan_devices() can rebind drivers later.
1645 *
1646 * FIXME the PM core self-deadlocks when unbinding
1647 * drivers during suspend/resume ... everything grabs
1648 * dpm_sem (not a spinlock, ugh). we want to unbind,
1649 * since we know every driver's probe/disconnect works
1650 * even for drivers that can't suspend.
1651 */
1652 if (!driver->suspend || state.event > PM_EVENT_FREEZE) {
1653#if 1
1654 dev_warn(&intf->dev, "resume is unsafe!\n");
1655#else
1656 down_write(&usb_bus_type.rwsem);
1657 device_release_driver(&intf->dev);
1658 up_write(&usb_bus_type.rwsem);
1659#endif
1660 } 1621 }
1661 } 1622 }
1662 } 1623 }
1663 1624
1664 /* 1625 /* we only change a device's upstream USB link.
1665 * FIXME this needs port power off call paths too, to help force 1626 * root hubs have no upstream USB link.
1666 * USB into the "generic" PM model. At least for devices on
1667 * ports that aren't using ganged switching (usually root hubs).
1668 *
1669 * NOTE: SRP-capable links should adopt more aggressive poweroff
1670 * policies (when HNP doesn't apply) once we have mechanisms to
1671 * turn power back on! (Likely not before 2.7...)
1672 */ 1627 */
1673 if (state.event > PM_EVENT_FREEZE) { 1628 if (udev->parent)
1674 dev_warn(&udev->dev, "no poweroff yet, suspending instead\n");
1675 }
1676
1677 /* "global suspend" of the HC-to-USB interface (root hub), or
1678 * "selective suspend" of just one hub-device link.
1679 */
1680 if (!udev->parent) {
1681 struct usb_bus *bus = udev->bus;
1682 if (bus && bus->op->hub_suspend) {
1683 status = bus->op->hub_suspend (bus);
1684 if (status == 0) {
1685 dev_dbg(&udev->dev, "usb suspend\n");
1686 usb_set_device_state(udev,
1687 USB_STATE_SUSPENDED);
1688 }
1689 } else
1690 status = -EOPNOTSUPP;
1691 } else
1692 status = hub_port_suspend(hdev_to_hub(udev->parent), port1, 1629 status = hub_port_suspend(hdev_to_hub(udev->parent), port1,
1693 udev); 1630 udev);
1694 1631
1695 if (status == 0) 1632 if (status == 0)
1696 udev->dev.power.power_state = state; 1633 udev->dev.power.power_state = PMSG_SUSPEND;
1697 return status; 1634 return status;
1698} 1635}
1699 1636
1700/** 1637#endif
1638
1639/*
1701 * usb_suspend_device - suspend a usb device 1640 * usb_suspend_device - suspend a usb device
1702 * @udev: device that's no longer in active use 1641 * @udev: device that's no longer in active use
1703 * @state: PMSG_SUSPEND to suspend 1642 * Context: must be able to sleep; device not locked; pm locks held
1704 * Context: must be able to sleep; device not locked
1705 * 1643 *
1706 * Suspends a USB device that isn't in active use, conserving power. 1644 * Suspends a USB device that isn't in active use, conserving power.
1707 * Devices may wake out of a suspend, if anything important happens, 1645 * Devices may wake out of a suspend, if anything important happens,
@@ -1709,37 +1647,50 @@ static int __usb_suspend_device (struct usb_device *udev, int port1,
1709 * suspend by the host, using usb_resume_device(). It's also routine 1647 * suspend by the host, using usb_resume_device(). It's also routine
1710 * to disconnect devices while they are suspended. 1648 * to disconnect devices while they are suspended.
1711 * 1649 *
1650 * This only affects the USB hardware for a device; its interfaces
1651 * (and, for hubs, child devices) must already have been suspended.
1652 *
1712 * Suspending OTG devices may trigger HNP, if that's been enabled 1653 * Suspending OTG devices may trigger HNP, if that's been enabled
1713 * between a pair of dual-role devices. That will change roles, such 1654 * between a pair of dual-role devices. That will change roles, such
1714 * as from A-Host to A-Peripheral or from B-Host back to B-Peripheral. 1655 * as from A-Host to A-Peripheral or from B-Host back to B-Peripheral.
1715 * 1656 *
1716 * Returns 0 on success, else negative errno. 1657 * Returns 0 on success, else negative errno.
1717 */ 1658 */
1718int usb_suspend_device(struct usb_device *udev, pm_message_t state) 1659int usb_suspend_device(struct usb_device *udev)
1719{ 1660{
1661#ifdef CONFIG_USB_SUSPEND
1720 int port1, status; 1662 int port1, status;
1721 1663
1722 port1 = locktree(udev); 1664 port1 = locktree(udev);
1723 if (port1 < 0) 1665 if (port1 < 0)
1724 return port1; 1666 return port1;
1725 1667
1726 status = __usb_suspend_device(udev, port1, state); 1668 status = __usb_suspend_device(udev, port1);
1727 usb_unlock_device(udev); 1669 usb_unlock_device(udev);
1728 return status; 1670 return status;
1671#else
1672 /* NOTE: udev->state unchanged, it's not lying ... */
1673 udev->dev.power.power_state = PMSG_SUSPEND;
1674 return 0;
1675#endif
1729} 1676}
1677EXPORT_SYMBOL_GPL(usb_suspend_device);
1730 1678
1731/* 1679/*
1680 * If the USB "suspend" state is in use (rather than "global suspend"),
1681 * many devices will be individually taken out of suspend state using
1682 * special" resume" signaling. These routines kick in shortly after
1732 * hardware resume signaling is finished, either because of selective 1683 * hardware resume signaling is finished, either because of selective
1733 * resume (by host) or remote wakeup (by device) ... now see what changed 1684 * resume (by host) or remote wakeup (by device) ... now see what changed
1734 * in the tree that's rooted at this device. 1685 * in the tree that's rooted at this device.
1735 */ 1686 */
1736static int finish_port_resume(struct usb_device *udev) 1687static int finish_device_resume(struct usb_device *udev)
1737{ 1688{
1738 int status; 1689 int status;
1739 u16 devstatus; 1690 u16 devstatus;
1740 1691
1741 /* caller owns the udev device lock */ 1692 /* caller owns the udev device lock */
1742 dev_dbg(&udev->dev, "usb resume\n"); 1693 dev_dbg(&udev->dev, "finish resume\n");
1743 1694
1744 /* usb ch9 identifies four variants of SUSPENDED, based on what 1695 /* usb ch9 identifies four variants of SUSPENDED, based on what
1745 * state the device resumes to. Linux currently won't see the 1696 * state the device resumes to. Linux currently won't see the
@@ -1749,7 +1700,6 @@ static int finish_port_resume(struct usb_device *udev)
1749 usb_set_device_state(udev, udev->actconfig 1700 usb_set_device_state(udev, udev->actconfig
1750 ? USB_STATE_CONFIGURED 1701 ? USB_STATE_CONFIGURED
1751 : USB_STATE_ADDRESS); 1702 : USB_STATE_ADDRESS);
1752 udev->dev.power.power_state = PMSG_ON;
1753 1703
1754 /* 10.5.4.5 says be sure devices in the tree are still there. 1704 /* 10.5.4.5 says be sure devices in the tree are still there.
1755 * For now let's assume the device didn't go crazy on resume, 1705 * For now let's assume the device didn't go crazy on resume,
@@ -1762,9 +1712,11 @@ static int finish_port_resume(struct usb_device *udev)
1762 status); 1712 status);
1763 else if (udev->actconfig) { 1713 else if (udev->actconfig) {
1764 unsigned i; 1714 unsigned i;
1715 int (*resume)(struct device *);
1765 1716
1766 le16_to_cpus(&devstatus); 1717 le16_to_cpus(&devstatus);
1767 if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { 1718 if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)
1719 && udev->parent) {
1768 status = usb_control_msg(udev, 1720 status = usb_control_msg(udev,
1769 usb_sndctrlpipe(udev, 0), 1721 usb_sndctrlpipe(udev, 0),
1770 USB_REQ_CLEAR_FEATURE, 1722 USB_REQ_CLEAR_FEATURE,
@@ -1780,33 +1732,11 @@ static int finish_port_resume(struct usb_device *udev)
1780 } 1732 }
1781 1733
1782 /* resume interface drivers; if this is a hub, it 1734 /* resume interface drivers; if this is a hub, it
1783 * resumes the child devices 1735 * may have a child resume event to deal with soon
1784 */ 1736 */
1785 for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { 1737 resume = udev->dev.bus->resume;
1786 struct usb_interface *intf; 1738 for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++)
1787 struct usb_driver *driver; 1739 (void) resume(&udev->actconfig->interface[i]->dev);
1788
1789 intf = udev->actconfig->interface[i];
1790 if (intf->dev.power.power_state.event == PM_EVENT_ON)
1791 continue;
1792 if (!intf->dev.driver) {
1793 /* FIXME maybe force to alt 0 */
1794 continue;
1795 }
1796 driver = to_usb_driver(intf->dev.driver);
1797
1798 /* bus_rescan_devices() may rebind drivers */
1799 if (!driver->resume)
1800 continue;
1801
1802 /* can we do better than just logging errors? */
1803 status = driver->resume(intf);
1804 if (intf->dev.power.power_state.event != PM_EVENT_ON
1805 || status)
1806 dev_dbg(&intf->dev,
1807 "resume fail, state %d code %d\n",
1808 intf->dev.power.power_state.event, status);
1809 }
1810 status = 0; 1740 status = 0;
1811 1741
1812 } else if (udev->devnum <= 0) { 1742 } else if (udev->devnum <= 0) {
@@ -1816,6 +1746,8 @@ static int finish_port_resume(struct usb_device *udev)
1816 return status; 1746 return status;
1817} 1747}
1818 1748
1749#ifdef CONFIG_USB_SUSPEND
1750
1819static int 1751static int
1820hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) 1752hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
1821{ 1753{
@@ -1861,7 +1793,7 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
1861 /* TRSMRCY = 10 msec */ 1793 /* TRSMRCY = 10 msec */
1862 msleep(10); 1794 msleep(10);
1863 if (udev) 1795 if (udev)
1864 status = finish_port_resume(udev); 1796 status = finish_device_resume(udev);
1865 } 1797 }
1866 } 1798 }
1867 if (status < 0) 1799 if (status < 0)
@@ -1870,12 +1802,12 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
1870 return status; 1802 return status;
1871} 1803}
1872 1804
1873static int hub_resume (struct usb_interface *intf); 1805#endif
1874 1806
1875/** 1807/*
1876 * usb_resume_device - re-activate a suspended usb device 1808 * usb_resume_device - re-activate a suspended usb device
1877 * @udev: device to re-activate 1809 * @udev: device to re-activate
1878 * Context: must be able to sleep; device not locked 1810 * Context: must be able to sleep; device not locked; pm locks held
1879 * 1811 *
1880 * This will re-activate the suspended device, increasing power usage 1812 * This will re-activate the suspended device, increasing power usage
1881 * while letting drivers communicate again with its endpoints. 1813 * while letting drivers communicate again with its endpoints.
@@ -1893,35 +1825,22 @@ int usb_resume_device(struct usb_device *udev)
1893 if (port1 < 0) 1825 if (port1 < 0)
1894 return port1; 1826 return port1;
1895 1827
1896 /* "global resume" of the HC-to-USB interface (root hub), or 1828#ifdef CONFIG_USB_SUSPEND
1897 * selective resume of one hub-to-device port 1829 /* selective resume of one downstream hub-to-device port */
1898 */ 1830 if (udev->parent) {
1899 if (!udev->parent) { 1831 if (udev->state == USB_STATE_SUSPENDED) {
1900 struct usb_bus *bus = udev->bus; 1832 // NOTE swsusp may bork us, device state being wrong...
1901 if (bus && bus->op->hub_resume) { 1833 // NOTE this fails if parent is also suspended...
1902 status = bus->op->hub_resume (bus); 1834 status = hub_port_resume(hdev_to_hub(udev->parent),
1835 port1, udev);
1903 } else 1836 } else
1904 status = -EOPNOTSUPP; 1837 status = 0;
1905 if (status == 0) { 1838 } else
1906 dev_dbg(&udev->dev, "usb resume\n"); 1839#endif
1907 /* TRSMRCY = 10 msec */ 1840 status = finish_device_resume(udev);
1908 msleep(10); 1841 if (status < 0)
1909 usb_set_device_state (udev, USB_STATE_CONFIGURED);
1910 udev->dev.power.power_state = PMSG_ON;
1911 status = hub_resume (udev
1912 ->actconfig->interface[0]);
1913 }
1914 } else if (udev->state == USB_STATE_SUSPENDED) {
1915 // NOTE this fails if parent is also suspended...
1916 status = hub_port_resume(hdev_to_hub(udev->parent),
1917 port1, udev);
1918 } else {
1919 status = 0;
1920 }
1921 if (status < 0) {
1922 dev_dbg(&udev->dev, "can't resume, status %d\n", 1842 dev_dbg(&udev->dev, "can't resume, status %d\n",
1923 status); 1843 status);
1924 }
1925 1844
1926 usb_unlock_device(udev); 1845 usb_unlock_device(udev);
1927 1846
@@ -1938,6 +1857,8 @@ static int remote_wakeup(struct usb_device *udev)
1938{ 1857{
1939 int status = 0; 1858 int status = 0;
1940 1859
1860#ifdef CONFIG_USB_SUSPEND
1861
1941 /* don't repeat RESUME sequence if this device 1862 /* don't repeat RESUME sequence if this device
1942 * was already woken up by some other task 1863 * was already woken up by some other task
1943 */ 1864 */
@@ -1946,38 +1867,52 @@ static int remote_wakeup(struct usb_device *udev)
1946 dev_dbg(&udev->dev, "RESUME (wakeup)\n"); 1867 dev_dbg(&udev->dev, "RESUME (wakeup)\n");
1947 /* TRSMRCY = 10 msec */ 1868 /* TRSMRCY = 10 msec */
1948 msleep(10); 1869 msleep(10);
1949 status = finish_port_resume(udev); 1870 status = finish_device_resume(udev);
1950 } 1871 }
1951 up(&udev->serialize); 1872 up(&udev->serialize);
1873#endif
1952 return status; 1874 return status;
1953} 1875}
1954 1876
1955static int hub_suspend(struct usb_interface *intf, pm_message_t state) 1877static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
1956{ 1878{
1957 struct usb_hub *hub = usb_get_intfdata (intf); 1879 struct usb_hub *hub = usb_get_intfdata (intf);
1958 struct usb_device *hdev = hub->hdev; 1880 struct usb_device *hdev = hub->hdev;
1959 unsigned port1; 1881 unsigned port1;
1960 int status;
1961
1962 /* stop khubd and related activity */
1963 hub_quiesce(hub);
1964 1882
1965 /* then suspend every port */ 1883 /* fail if children aren't already suspended */
1966 for (port1 = 1; port1 <= hdev->maxchild; port1++) { 1884 for (port1 = 1; port1 <= hdev->maxchild; port1++) {
1967 struct usb_device *udev; 1885 struct usb_device *udev;
1968 1886
1969 udev = hdev->children [port1-1]; 1887 udev = hdev->children [port1-1];
1970 if (!udev) 1888 if (udev && (udev->dev.power.power_state.event
1971 continue; 1889 == PM_EVENT_ON
1972 down(&udev->serialize); 1890#ifdef CONFIG_USB_SUSPEND
1973 status = __usb_suspend_device(udev, port1, state); 1891 || udev->state != USB_STATE_SUSPENDED
1974 up(&udev->serialize); 1892#endif
1975 if (status < 0) 1893 )) {
1976 dev_dbg(&intf->dev, "suspend port %d --> %d\n", 1894 dev_dbg(&intf->dev, "port %d nyet suspended\n", port1);
1977 port1, status); 1895 return -EBUSY;
1896 }
1978 } 1897 }
1979 1898
1980 intf->dev.power.power_state = state; 1899 /* "global suspend" of the downstream HC-to-USB interface */
1900 if (!hdev->parent) {
1901 struct usb_bus *bus = hdev->bus;
1902 if (bus) {
1903 int status = hcd_bus_suspend (bus);
1904
1905 if (status != 0) {
1906 dev_dbg(&hdev->dev, "'global' suspend %d\n",
1907 status);
1908 return status;
1909 }
1910 } else
1911 return -EOPNOTSUPP;
1912 }
1913
1914 /* stop khubd and related activity */
1915 hub_quiesce(hub);
1981 return 0; 1916 return 0;
1982} 1917}
1983 1918
@@ -1985,11 +1920,35 @@ static int hub_resume(struct usb_interface *intf)
1985{ 1920{
1986 struct usb_device *hdev = interface_to_usbdev(intf); 1921 struct usb_device *hdev = interface_to_usbdev(intf);
1987 struct usb_hub *hub = usb_get_intfdata (intf); 1922 struct usb_hub *hub = usb_get_intfdata (intf);
1988 unsigned port1;
1989 int status; 1923 int status;
1990 1924
1991 if (intf->dev.power.power_state.event == PM_EVENT_ON) 1925 /* "global resume" of the downstream HC-to-USB interface */
1992 return 0; 1926 if (!hdev->parent) {
1927 struct usb_bus *bus = hdev->bus;
1928 if (bus) {
1929 status = hcd_bus_resume (bus);
1930 if (status) {
1931 dev_dbg(&intf->dev, "'global' resume %d\n",
1932 status);
1933 return status;
1934 }
1935 } else
1936 return -EOPNOTSUPP;
1937 if (status == 0) {
1938 /* TRSMRCY = 10 msec */
1939 msleep(10);
1940 }
1941 }
1942
1943 hub_activate(hub);
1944
1945 /* REVISIT: this recursion probably shouldn't exist. Remove
1946 * this code sometime, after retesting with different root and
1947 * external hubs.
1948 */
1949#ifdef CONFIG_USB_SUSPEND
1950 {
1951 unsigned port1;
1993 1952
1994 for (port1 = 1; port1 <= hdev->maxchild; port1++) { 1953 for (port1 = 1; port1 <= hdev->maxchild; port1++) {
1995 struct usb_device *udev; 1954 struct usb_device *udev;
@@ -2015,7 +1974,7 @@ static int hub_resume(struct usb_interface *intf)
2015 if (portstat & USB_PORT_STAT_SUSPEND) 1974 if (portstat & USB_PORT_STAT_SUSPEND)
2016 status = hub_port_resume(hub, port1, udev); 1975 status = hub_port_resume(hub, port1, udev);
2017 else { 1976 else {
2018 status = finish_port_resume(udev); 1977 status = finish_device_resume(udev);
2019 if (status < 0) { 1978 if (status < 0) {
2020 dev_dbg(&intf->dev, "resume port %d --> %d\n", 1979 dev_dbg(&intf->dev, "resume port %d --> %d\n",
2021 port1, status); 1980 port1, status);
@@ -2024,43 +1983,31 @@ static int hub_resume(struct usb_interface *intf)
2024 } 1983 }
2025 up(&udev->serialize); 1984 up(&udev->serialize);
2026 } 1985 }
2027 intf->dev.power.power_state = PMSG_ON; 1986 }
2028 1987#endif
2029 hub->resume_root_hub = 0;
2030 hub_activate(hub);
2031 return 0; 1988 return 0;
2032} 1989}
2033 1990
2034void usb_resume_root_hub(struct usb_device *hdev) 1991void usb_suspend_root_hub(struct usb_device *hdev)
2035{ 1992{
2036 struct usb_hub *hub = hdev_to_hub(hdev); 1993 struct usb_hub *hub = hdev_to_hub(hdev);
2037 1994
2038 hub->resume_root_hub = 1; 1995 /* This also makes any led blinker stop retriggering. We're called
2039 kick_khubd(hub); 1996 * from irq, so the blinker might still be scheduled. Caller promises
1997 * that the root hub status URB will be canceled.
1998 */
1999 __hub_quiesce(hub);
2000 mark_quiesced(to_usb_interface(hub->intfdev));
2040} 2001}
2041 2002
2042#else /* !CONFIG_USB_SUSPEND */ 2003void usb_resume_root_hub(struct usb_device *hdev)
2043
2044int usb_suspend_device(struct usb_device *udev, pm_message_t state)
2045{ 2004{
2046 return 0; 2005 struct usb_hub *hub = hdev_to_hub(hdev);
2047}
2048 2006
2049int usb_resume_device(struct usb_device *udev) 2007 hub->resume_root_hub = 1;
2050{ 2008 kick_khubd(hub);
2051 return 0;
2052} 2009}
2053 2010
2054#define hub_suspend NULL
2055#define hub_resume NULL
2056#define remote_wakeup(x) 0
2057
2058#endif /* CONFIG_USB_SUSPEND */
2059
2060EXPORT_SYMBOL(usb_suspend_device);
2061EXPORT_SYMBOL(usb_resume_device);
2062
2063
2064 2011
2065/* USB 2.0 spec, 7.1.7.3 / fig 7-29: 2012/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
2066 * 2013 *
@@ -2469,6 +2416,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
2469{ 2416{
2470 struct usb_device *hdev = hub->hdev; 2417 struct usb_device *hdev = hub->hdev;
2471 struct device *hub_dev = hub->intfdev; 2418 struct device *hub_dev = hub->intfdev;
2419 u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
2472 int status, i; 2420 int status, i;
2473 2421
2474 dev_dbg (hub_dev, 2422 dev_dbg (hub_dev,
@@ -2506,8 +2454,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
2506 if (!(portstatus & USB_PORT_STAT_CONNECTION)) { 2454 if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
2507 2455
2508 /* maybe switch power back on (e.g. root hub was reset) */ 2456 /* maybe switch power back on (e.g. root hub was reset) */
2509 if ((hub->descriptor->wHubCharacteristics 2457 if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
2510 & HUB_CHAR_LPSM) < 2
2511 && !(portstatus & (1 << USB_PORT_FEAT_POWER))) 2458 && !(portstatus & (1 << USB_PORT_FEAT_POWER)))
2512 set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); 2459 set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
2513 2460
@@ -2686,21 +2633,28 @@ static void hub_events(void)
2686 intf = to_usb_interface(hub->intfdev); 2633 intf = to_usb_interface(hub->intfdev);
2687 hub_dev = &intf->dev; 2634 hub_dev = &intf->dev;
2688 2635
2689 dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n", 2636 i = hub->resume_root_hub;
2637
2638 dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x%s\n",
2690 hdev->state, hub->descriptor 2639 hdev->state, hub->descriptor
2691 ? hub->descriptor->bNbrPorts 2640 ? hub->descriptor->bNbrPorts
2692 : 0, 2641 : 0,
2693 /* NOTE: expects max 15 ports... */ 2642 /* NOTE: expects max 15 ports... */
2694 (u16) hub->change_bits[0], 2643 (u16) hub->change_bits[0],
2695 (u16) hub->event_bits[0]); 2644 (u16) hub->event_bits[0],
2645 i ? ", resume root" : "");
2696 2646
2697 usb_get_intf(intf); 2647 usb_get_intf(intf);
2698 i = hub->resume_root_hub;
2699 spin_unlock_irq(&hub_event_lock); 2648 spin_unlock_irq(&hub_event_lock);
2700 2649
2701 /* Is this is a root hub wanting to be resumed? */ 2650 /* Is this is a root hub wanting to reactivate the downstream
2702 if (i) 2651 * ports? If so, be sure the interface resumes even if its
2703 usb_resume_device(hdev); 2652 * stub "device" node was never suspended.
2653 */
2654 if (i) {
2655 dpm_runtime_resume(&hdev->dev);
2656 dpm_runtime_resume(&intf->dev);
2657 }
2704 2658
2705 /* Lock the device, then check to see if we were 2659 /* Lock the device, then check to see if we were
2706 * disconnected while waiting for the lock to succeed. */ 2660 * disconnected while waiting for the lock to succeed. */
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index e7fa9b5a521e..bf23f8978024 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -131,7 +131,7 @@ struct usb_hub_descriptor {
131 __u8 bDescLength; 131 __u8 bDescLength;
132 __u8 bDescriptorType; 132 __u8 bDescriptorType;
133 __u8 bNbrPorts; 133 __u8 bNbrPorts;
134 __u16 wHubCharacteristics; 134 __le16 wHubCharacteristics;
135 __u8 bPwrOn2PwrGood; 135 __u8 bPwrOn2PwrGood;
136 __u8 bHubContrCurrent; 136 __u8 bHubContrCurrent;
137 /* add 1 bit for hub status change; round to bytes */ 137 /* add 1 bit for hub status change; round to bytes */
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index d07bba01995b..12f490fdee8f 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -39,6 +39,7 @@
39#include <linux/usbdevice_fs.h> 39#include <linux/usbdevice_fs.h>
40#include <linux/smp_lock.h> 40#include <linux/smp_lock.h>
41#include <linux/parser.h> 41#include <linux/parser.h>
42#include <linux/notifier.h>
42#include <asm/byteorder.h> 43#include <asm/byteorder.h>
43#include "usb.h" 44#include "usb.h"
44#include "hcd.h" 45#include "hcd.h"
@@ -619,7 +620,7 @@ void usbfs_update_special (void)
619 } 620 }
620} 621}
621 622
622void usbfs_add_bus(struct usb_bus *bus) 623static void usbfs_add_bus(struct usb_bus *bus)
623{ 624{
624 struct dentry *parent; 625 struct dentry *parent;
625 char name[8]; 626 char name[8];
@@ -642,12 +643,9 @@ void usbfs_add_bus(struct usb_bus *bus)
642 err ("error creating usbfs bus entry"); 643 err ("error creating usbfs bus entry");
643 return; 644 return;
644 } 645 }
645
646 usbfs_update_special();
647 usbfs_conn_disc_event();
648} 646}
649 647
650void usbfs_remove_bus(struct usb_bus *bus) 648static void usbfs_remove_bus(struct usb_bus *bus)
651{ 649{
652 if (bus->usbfs_dentry) { 650 if (bus->usbfs_dentry) {
653 fs_remove_file (bus->usbfs_dentry); 651 fs_remove_file (bus->usbfs_dentry);
@@ -659,12 +657,9 @@ void usbfs_remove_bus(struct usb_bus *bus)
659 remove_special_files(); 657 remove_special_files();
660 num_buses = 0; 658 num_buses = 0;
661 } 659 }
662
663 usbfs_update_special();
664 usbfs_conn_disc_event();
665} 660}
666 661
667void usbfs_add_device(struct usb_device *dev) 662static void usbfs_add_device(struct usb_device *dev)
668{ 663{
669 char name[8]; 664 char name[8];
670 int i; 665 int i;
@@ -690,12 +685,9 @@ void usbfs_add_device(struct usb_device *dev)
690 } 685 }
691 if (dev->usbfs_dentry->d_inode) 686 if (dev->usbfs_dentry->d_inode)
692 dev->usbfs_dentry->d_inode->i_size = i_size; 687 dev->usbfs_dentry->d_inode->i_size = i_size;
693
694 usbfs_update_special();
695 usbfs_conn_disc_event();
696} 688}
697 689
698void usbfs_remove_device(struct usb_device *dev) 690static void usbfs_remove_device(struct usb_device *dev)
699{ 691{
700 struct dev_state *ds; 692 struct dev_state *ds;
701 struct siginfo sinfo; 693 struct siginfo sinfo;
@@ -716,10 +708,33 @@ void usbfs_remove_device(struct usb_device *dev)
716 kill_proc_info_as_uid(ds->discsignr, &sinfo, ds->disc_pid, ds->disc_uid, ds->disc_euid); 708 kill_proc_info_as_uid(ds->discsignr, &sinfo, ds->disc_pid, ds->disc_uid, ds->disc_euid);
717 } 709 }
718 } 710 }
711}
712
713static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev)
714{
715 switch (action) {
716 case USB_DEVICE_ADD:
717 usbfs_add_device(dev);
718 break;
719 case USB_DEVICE_REMOVE:
720 usbfs_remove_device(dev);
721 break;
722 case USB_BUS_ADD:
723 usbfs_add_bus(dev);
724 break;
725 case USB_BUS_REMOVE:
726 usbfs_remove_bus(dev);
727 }
728
719 usbfs_update_special(); 729 usbfs_update_special();
720 usbfs_conn_disc_event(); 730 usbfs_conn_disc_event();
731 return NOTIFY_OK;
721} 732}
722 733
734static struct notifier_block usbfs_nb = {
735 .notifier_call = usbfs_notify,
736};
737
723/* --------------------------------------------------------------------- */ 738/* --------------------------------------------------------------------- */
724 739
725static struct proc_dir_entry *usbdir = NULL; 740static struct proc_dir_entry *usbdir = NULL;
@@ -732,6 +747,8 @@ int __init usbfs_init(void)
732 if (retval) 747 if (retval)
733 return retval; 748 return retval;
734 749
750 usb_register_notify(&usbfs_nb);
751
735 /* create mount point for usbfs */ 752 /* create mount point for usbfs */
736 usbdir = proc_mkdir("usb", proc_bus); 753 usbdir = proc_mkdir("usb", proc_bus);
737 754
@@ -740,6 +757,7 @@ int __init usbfs_init(void)
740 757
741void usbfs_cleanup(void) 758void usbfs_cleanup(void)
742{ 759{
760 usb_unregister_notify(&usbfs_nb);
743 unregister_filesystem(&usb_fs_type); 761 unregister_filesystem(&usb_fs_type);
744 if (usbdir) 762 if (usbdir)
745 remove_proc_entry("usb", proc_bus); 763 remove_proc_entry("usb", proc_bus);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index f9a81e84dbdf..644a3d4f12aa 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -187,21 +187,37 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u
187 * If a thread in your driver uses this call, make sure your disconnect() 187 * If a thread in your driver uses this call, make sure your disconnect()
188 * method can wait for it to complete. Since you don't have a handle on 188 * method can wait for it to complete. Since you don't have a handle on
189 * the URB used, you can't cancel the request. 189 * the URB used, you can't cancel the request.
190 *
191 * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT
192 * ioctl, users are forced to abuse this routine by using it to submit
193 * URBs for interrupt endpoints. We will take the liberty of creating
194 * an interrupt URB (with the default interval) if the target is an
195 * interrupt endpoint.
190 */ 196 */
191int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, 197int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
192 void *data, int len, int *actual_length, int timeout) 198 void *data, int len, int *actual_length, int timeout)
193{ 199{
194 struct urb *urb; 200 struct urb *urb;
201 struct usb_host_endpoint *ep;
195 202
196 if (len < 0) 203 ep = (usb_pipein(pipe) ? usb_dev->ep_in : usb_dev->ep_out)
204 [usb_pipeendpoint(pipe)];
205 if (!ep || len < 0)
197 return -EINVAL; 206 return -EINVAL;
198 207
199 urb=usb_alloc_urb(0, GFP_KERNEL); 208 urb = usb_alloc_urb(0, GFP_KERNEL);
200 if (!urb) 209 if (!urb)
201 return -ENOMEM; 210 return -ENOMEM;
202 211
203 usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, 212 if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
204 usb_api_blocking_completion, NULL); 213 USB_ENDPOINT_XFER_INT) {
214 pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
215 usb_fill_int_urb(urb, usb_dev, pipe, data, len,
216 usb_api_blocking_completion, NULL,
217 ep->desc.bInterval);
218 } else
219 usb_fill_bulk_urb(urb, usb_dev, pipe, data, len,
220 usb_api_blocking_completion, NULL);
205 221
206 return usb_start_wait_urb(urb, timeout, actual_length); 222 return usb_start_wait_urb(urb, timeout, actual_length);
207} 223}
@@ -771,6 +787,31 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
771 return err; 787 return err;
772} 788}
773 789
790/**
791 * usb_cache_string - read a string descriptor and cache it for later use
792 * @udev: the device whose string descriptor is being read
793 * @index: the descriptor index
794 *
795 * Returns a pointer to a kmalloc'ed buffer containing the descriptor string,
796 * or NULL if the index is 0 or the string could not be read.
797 */
798char *usb_cache_string(struct usb_device *udev, int index)
799{
800 char *buf;
801 char *smallbuf = NULL;
802 int len;
803
804 if (index > 0 && (buf = kmalloc(256, GFP_KERNEL)) != NULL) {
805 if ((len = usb_string(udev, index, buf, 256)) > 0) {
806 if ((smallbuf = kmalloc(++len, GFP_KERNEL)) == NULL)
807 return buf;
808 memcpy(smallbuf, buf, len);
809 }
810 kfree(buf);
811 }
812 return smallbuf;
813}
814
774/* 815/*
775 * usb_get_device_descriptor - (re)reads the device descriptor (usbcore) 816 * usb_get_device_descriptor - (re)reads the device descriptor (usbcore)
776 * @dev: the device whose device descriptor is being updated 817 * @dev: the device whose device descriptor is being updated
@@ -992,8 +1033,6 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
992 dev_dbg (&dev->dev, "unregistering interface %s\n", 1033 dev_dbg (&dev->dev, "unregistering interface %s\n",
993 interface->dev.bus_id); 1034 interface->dev.bus_id);
994 usb_remove_sysfs_intf_files(interface); 1035 usb_remove_sysfs_intf_files(interface);
995 kfree(interface->cur_altsetting->string);
996 interface->cur_altsetting->string = NULL;
997 device_del (&interface->dev); 1036 device_del (&interface->dev);
998 } 1037 }
999 1038
@@ -1133,6 +1172,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
1133 */ 1172 */
1134 1173
1135 /* prevent submissions using previous endpoint settings */ 1174 /* prevent submissions using previous endpoint settings */
1175 if (device_is_registered(&iface->dev))
1176 usb_remove_sysfs_intf_files(iface);
1136 usb_disable_interface(dev, iface); 1177 usb_disable_interface(dev, iface);
1137 1178
1138 iface->cur_altsetting = alt; 1179 iface->cur_altsetting = alt;
@@ -1168,6 +1209,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
1168 * (Likewise, EP0 never "halts" on well designed devices.) 1209 * (Likewise, EP0 never "halts" on well designed devices.)
1169 */ 1210 */
1170 usb_enable_interface(dev, iface); 1211 usb_enable_interface(dev, iface);
1212 if (device_is_registered(&iface->dev))
1213 usb_create_sysfs_intf_files(iface);
1171 1214
1172 return 0; 1215 return 0;
1173} 1216}
@@ -1217,10 +1260,8 @@ int usb_reset_configuration(struct usb_device *dev)
1217 USB_REQ_SET_CONFIGURATION, 0, 1260 USB_REQ_SET_CONFIGURATION, 0,
1218 config->desc.bConfigurationValue, 0, 1261 config->desc.bConfigurationValue, 0,
1219 NULL, 0, USB_CTRL_SET_TIMEOUT); 1262 NULL, 0, USB_CTRL_SET_TIMEOUT);
1220 if (retval < 0) { 1263 if (retval < 0)
1221 usb_set_device_state(dev, USB_STATE_ADDRESS);
1222 return retval; 1264 return retval;
1223 }
1224 1265
1225 dev->toggle[0] = dev->toggle[1] = 0; 1266 dev->toggle[0] = dev->toggle[1] = 0;
1226 1267
@@ -1229,6 +1270,8 @@ int usb_reset_configuration(struct usb_device *dev)
1229 struct usb_interface *intf = config->interface[i]; 1270 struct usb_interface *intf = config->interface[i];
1230 struct usb_host_interface *alt; 1271 struct usb_host_interface *alt;
1231 1272
1273 if (device_is_registered(&intf->dev))
1274 usb_remove_sysfs_intf_files(intf);
1232 alt = usb_altnum_to_altsetting(intf, 0); 1275 alt = usb_altnum_to_altsetting(intf, 0);
1233 1276
1234 /* No altsetting 0? We'll assume the first altsetting. 1277 /* No altsetting 0? We'll assume the first altsetting.
@@ -1241,6 +1284,8 @@ int usb_reset_configuration(struct usb_device *dev)
1241 1284
1242 intf->cur_altsetting = alt; 1285 intf->cur_altsetting = alt;
1243 usb_enable_interface(dev, intf); 1286 usb_enable_interface(dev, intf);
1287 if (device_is_registered(&intf->dev))
1288 usb_create_sysfs_intf_files(intf);
1244 } 1289 }
1245 return 0; 1290 return 0;
1246} 1291}
@@ -1328,7 +1373,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
1328 } 1373 }
1329 1374
1330 for (; n < nintf; ++n) { 1375 for (; n < nintf; ++n) {
1331 new_interfaces[n] = kmalloc( 1376 new_interfaces[n] = kzalloc(
1332 sizeof(struct usb_interface), 1377 sizeof(struct usb_interface),
1333 GFP_KERNEL); 1378 GFP_KERNEL);
1334 if (!new_interfaces[n]) { 1379 if (!new_interfaces[n]) {
@@ -1369,7 +1414,6 @@ free_interfaces:
1369 struct usb_host_interface *alt; 1414 struct usb_host_interface *alt;
1370 1415
1371 cp->interface[i] = intf = new_interfaces[i]; 1416 cp->interface[i] = intf = new_interfaces[i];
1372 memset(intf, 0, sizeof(*intf));
1373 intfc = cp->intf_cache[i]; 1417 intfc = cp->intf_cache[i];
1374 intf->altsetting = intfc->altsetting; 1418 intf->altsetting = intfc->altsetting;
1375 intf->num_altsetting = intfc->num_altsetting; 1419 intf->num_altsetting = intfc->num_altsetting;
@@ -1393,6 +1437,7 @@ free_interfaces:
1393 intf->dev.dma_mask = dev->dev.dma_mask; 1437 intf->dev.dma_mask = dev->dev.dma_mask;
1394 intf->dev.release = release_interface; 1438 intf->dev.release = release_interface;
1395 device_initialize (&intf->dev); 1439 device_initialize (&intf->dev);
1440 mark_quiesced(intf);
1396 sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d", 1441 sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d",
1397 dev->bus->busnum, dev->devpath, 1442 dev->bus->busnum, dev->devpath,
1398 configuration, 1443 configuration,
@@ -1400,12 +1445,9 @@ free_interfaces:
1400 } 1445 }
1401 kfree(new_interfaces); 1446 kfree(new_interfaces);
1402 1447
1403 if ((cp->desc.iConfiguration) && 1448 if (cp->string == NULL)
1404 (cp->string == NULL)) { 1449 cp->string = usb_cache_string(dev,
1405 cp->string = kmalloc(256, GFP_KERNEL); 1450 cp->desc.iConfiguration);
1406 if (cp->string)
1407 usb_string(dev, cp->desc.iConfiguration, cp->string, 256);
1408 }
1409 1451
1410 /* Now that all the interfaces are set up, register them 1452 /* Now that all the interfaces are set up, register them
1411 * to trigger binding of drivers to interfaces. probe() 1453 * to trigger binding of drivers to interfaces. probe()
@@ -1415,13 +1457,12 @@ free_interfaces:
1415 */ 1457 */
1416 for (i = 0; i < nintf; ++i) { 1458 for (i = 0; i < nintf; ++i) {
1417 struct usb_interface *intf = cp->interface[i]; 1459 struct usb_interface *intf = cp->interface[i];
1418 struct usb_interface_descriptor *desc; 1460 struct usb_host_interface *alt = intf->cur_altsetting;
1419 1461
1420 desc = &intf->altsetting [0].desc;
1421 dev_dbg (&dev->dev, 1462 dev_dbg (&dev->dev,
1422 "adding %s (config #%d, interface %d)\n", 1463 "adding %s (config #%d, interface %d)\n",
1423 intf->dev.bus_id, configuration, 1464 intf->dev.bus_id, configuration,
1424 desc->bInterfaceNumber); 1465 alt->desc.bInterfaceNumber);
1425 ret = device_add (&intf->dev); 1466 ret = device_add (&intf->dev);
1426 if (ret != 0) { 1467 if (ret != 0) {
1427 dev_err(&dev->dev, 1468 dev_err(&dev->dev,
@@ -1430,13 +1471,6 @@ free_interfaces:
1430 ret); 1471 ret);
1431 continue; 1472 continue;
1432 } 1473 }
1433 if ((intf->cur_altsetting->desc.iInterface) &&
1434 (intf->cur_altsetting->string == NULL)) {
1435 intf->cur_altsetting->string = kmalloc(256, GFP_KERNEL);
1436 if (intf->cur_altsetting->string)
1437 usb_string(dev, intf->cur_altsetting->desc.iInterface,
1438 intf->cur_altsetting->string, 256);
1439 }
1440 usb_create_sysfs_intf_files (intf); 1474 usb_create_sysfs_intf_files (intf);
1441 } 1475 }
1442 } 1476 }
diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c
new file mode 100644
index 000000000000..37da059eced7
--- /dev/null
+++ b/drivers/usb/core/notify.c
@@ -0,0 +1,120 @@
1/*
2 * All the USB notify logic
3 *
4 * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de>
5 *
6 * notifier functions originally based on those in kernel/sys.c
7 * but fixed up to not be so broken.
8 *
9 */
10
11
12#include <linux/config.h>
13#include <linux/kernel.h>
14#include <linux/notifier.h>
15#ifdef CONFIG_USB_DEBUG
16 #define DEBUG
17#else
18 #undef DEBUG
19#endif
20#include <linux/usb.h>
21
22#include "usb.h"
23
24
25static struct notifier_block *usb_notifier_list;
26static DECLARE_MUTEX(usb_notifier_lock);
27
28static void usb_notifier_chain_register(struct notifier_block **list,
29 struct notifier_block *n)
30{
31 down(&usb_notifier_lock);
32 while (*list) {
33 if (n->priority > (*list)->priority)
34 break;
35 list = &((*list)->next);
36 }
37 n->next = *list;
38 *list = n;
39 up(&usb_notifier_lock);
40}
41
42static void usb_notifier_chain_unregister(struct notifier_block **nl,
43 struct notifier_block *n)
44{
45 down(&usb_notifier_lock);
46 while ((*nl)!=NULL) {
47 if ((*nl)==n) {
48 *nl = n->next;
49 goto exit;
50 }
51 nl=&((*nl)->next);
52 }
53exit:
54 up(&usb_notifier_lock);
55}
56
57static int usb_notifier_call_chain(struct notifier_block **n,
58 unsigned long val, void *v)
59{
60 int ret=NOTIFY_DONE;
61 struct notifier_block *nb = *n;
62
63 down(&usb_notifier_lock);
64 while (nb) {
65 ret = nb->notifier_call(nb,val,v);
66 if (ret&NOTIFY_STOP_MASK) {
67 goto exit;
68 }
69 nb = nb->next;
70 }
71exit:
72 up(&usb_notifier_lock);
73 return ret;
74}
75
76/**
77 * usb_register_notify - register a notifier callback whenever a usb change happens
78 * @nb: pointer to the notifier block for the callback events.
79 *
80 * These changes are either USB devices or busses being added or removed.
81 */
82void usb_register_notify(struct notifier_block *nb)
83{
84 usb_notifier_chain_register(&usb_notifier_list, nb);
85}
86EXPORT_SYMBOL_GPL(usb_register_notify);
87
88/**
89 * usb_unregister_notify - unregister a notifier callback
90 * @nb: pointer to the notifier block for the callback events.
91 *
92 * usb_register_notifier() must have been previously called for this function
93 * to work properly.
94 */
95void usb_unregister_notify(struct notifier_block *nb)
96{
97 usb_notifier_chain_unregister(&usb_notifier_list, nb);
98}
99EXPORT_SYMBOL_GPL(usb_unregister_notify);
100
101
102void usb_notify_add_device(struct usb_device *udev)
103{
104 usb_notifier_call_chain(&usb_notifier_list, USB_DEVICE_ADD, udev);
105}
106
107void usb_notify_remove_device(struct usb_device *udev)
108{
109 usb_notifier_call_chain(&usb_notifier_list, USB_DEVICE_REMOVE, udev);
110}
111
112void usb_notify_add_bus(struct usb_bus *ubus)
113{
114 usb_notifier_call_chain(&usb_notifier_list, USB_BUS_ADD, ubus);
115}
116
117void usb_notify_remove_bus(struct usb_bus *ubus)
118{
119 usb_notifier_call_chain(&usb_notifier_list, USB_BUS_REMOVE, ubus);
120}
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 00297f113849..edd83e014452 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -22,9 +22,207 @@
22 22
23#include "usb.h" 23#include "usb.h"
24 24
25/* endpoint stuff */
26struct ep_object {
27 struct usb_endpoint_descriptor *desc;
28 struct usb_device *udev;
29 struct kobject kobj;
30};
31#define to_ep_object(_kobj) \
32 container_of(_kobj, struct ep_object, kobj)
33
34struct ep_attribute {
35 struct attribute attr;
36 ssize_t (*show)(struct usb_device *,
37 struct usb_endpoint_descriptor *, char *);
38};
39#define to_ep_attribute(_attr) \
40 container_of(_attr, struct ep_attribute, attr)
41
42#define EP_ATTR(_name) \
43struct ep_attribute ep_##_name = { \
44 .attr = {.name = #_name, .owner = THIS_MODULE, \
45 .mode = S_IRUGO}, \
46 .show = show_ep_##_name}
47
48#define usb_ep_attr(field, format_string) \
49static ssize_t show_ep_##field(struct usb_device *udev, \
50 struct usb_endpoint_descriptor *desc, \
51 char *buf) \
52{ \
53 return sprintf(buf, format_string, desc->field); \
54} \
55static EP_ATTR(field);
56
57usb_ep_attr(bLength, "%02x\n")
58usb_ep_attr(bEndpointAddress, "%02x\n")
59usb_ep_attr(bmAttributes, "%02x\n")
60usb_ep_attr(bInterval, "%02x\n")
61
62static ssize_t show_ep_wMaxPacketSize(struct usb_device *udev,
63 struct usb_endpoint_descriptor *desc, char *buf)
64{
65 return sprintf(buf, "%04x\n",
66 le16_to_cpu(desc->wMaxPacketSize) & 0x07ff);
67}
68static EP_ATTR(wMaxPacketSize);
69
70static ssize_t show_ep_type(struct usb_device *udev,
71 struct usb_endpoint_descriptor *desc, char *buf)
72{
73 char *type = "unknown";
74
75 switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
76 case USB_ENDPOINT_XFER_CONTROL:
77 type = "Control";
78 break;
79 case USB_ENDPOINT_XFER_ISOC:
80 type = "Isoc";
81 break;
82 case USB_ENDPOINT_XFER_BULK:
83 type = "Bulk";
84 break;
85 case USB_ENDPOINT_XFER_INT:
86 type = "Interrupt";
87 break;
88 }
89 return sprintf(buf, "%s\n", type);
90}
91static EP_ATTR(type);
92
93static ssize_t show_ep_interval(struct usb_device *udev,
94 struct usb_endpoint_descriptor *desc, char *buf)
95{
96 char unit;
97 unsigned interval = 0;
98 unsigned in;
99
100 in = (desc->bEndpointAddress & USB_DIR_IN);
101
102 switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
103 case USB_ENDPOINT_XFER_CONTROL:
104 if (udev->speed == USB_SPEED_HIGH) /* uframes per NAK */
105 interval = desc->bInterval;
106 break;
107 case USB_ENDPOINT_XFER_ISOC:
108 interval = 1 << (desc->bInterval - 1);
109 break;
110 case USB_ENDPOINT_XFER_BULK:
111 if (udev->speed == USB_SPEED_HIGH && !in) /* uframes per NAK */
112 interval = desc->bInterval;
113 break;
114 case USB_ENDPOINT_XFER_INT:
115 if (udev->speed == USB_SPEED_HIGH)
116 interval = 1 << (desc->bInterval - 1);
117 else
118 interval = desc->bInterval;
119 break;
120 }
121 interval *= (udev->speed == USB_SPEED_HIGH) ? 125 : 1000;
122 if (interval % 1000)
123 unit = 'u';
124 else {
125 unit = 'm';
126 interval /= 1000;
127 }
128
129 return sprintf(buf, "%d%cs\n", interval, unit);
130}
131static EP_ATTR(interval);
132
133static ssize_t show_ep_direction(struct usb_device *udev,
134 struct usb_endpoint_descriptor *desc, char *buf)
135{
136 char *direction;
137
138 if ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
139 USB_ENDPOINT_XFER_CONTROL)
140 direction = "both";
141 else if (desc->bEndpointAddress & USB_DIR_IN)
142 direction = "in";
143 else
144 direction = "out";
145 return sprintf(buf, "%s\n", direction);
146}
147static EP_ATTR(direction);
148
149static struct attribute *ep_attrs[] = {
150 &ep_bLength.attr,
151 &ep_bEndpointAddress.attr,
152 &ep_bmAttributes.attr,
153 &ep_bInterval.attr,
154 &ep_wMaxPacketSize.attr,
155 &ep_type.attr,
156 &ep_interval.attr,
157 &ep_direction.attr,
158 NULL,
159};
160
161static void ep_object_release(struct kobject *kobj)
162{
163 kfree(to_ep_object(kobj));
164}
165
166static ssize_t ep_object_show(struct kobject *kobj, struct attribute *attr,
167 char *buf)
168{
169 struct ep_object *ep_obj = to_ep_object(kobj);
170 struct ep_attribute *ep_attr = to_ep_attribute(attr);
171
172 return (ep_attr->show)(ep_obj->udev, ep_obj->desc, buf);
173}
174
175static struct sysfs_ops ep_object_sysfs_ops = {
176 .show = ep_object_show,
177};
178
179static struct kobj_type ep_object_ktype = {
180 .release = ep_object_release,
181 .sysfs_ops = &ep_object_sysfs_ops,
182 .default_attrs = ep_attrs,
183};
184
185static void usb_create_ep_files(struct kobject *parent,
186 struct usb_host_endpoint *endpoint,
187 struct usb_device *udev)
188{
189 struct ep_object *ep_obj;
190 struct kobject *kobj;
191
192 ep_obj = kzalloc(sizeof(struct ep_object), GFP_KERNEL);
193 if (!ep_obj)
194 return;
195
196 ep_obj->desc = &endpoint->desc;
197 ep_obj->udev = udev;
198
199 kobj = &ep_obj->kobj;
200 kobject_set_name(kobj, "ep_%02x", endpoint->desc.bEndpointAddress);
201 kobj->parent = parent;
202 kobj->ktype = &ep_object_ktype;
203
204 /* Don't use kobject_register, because it generates a hotplug event */
205 kobject_init(kobj);
206 if (kobject_add(kobj) == 0)
207 endpoint->kobj = kobj;
208 else
209 kobject_put(kobj);
210}
211
212static void usb_remove_ep_files(struct usb_host_endpoint *endpoint)
213{
214
215 if (endpoint->kobj) {
216 kobject_del(endpoint->kobj);
217 kobject_put(endpoint->kobj);
218 endpoint->kobj = NULL;
219 }
220}
221
25/* Active configuration fields */ 222/* Active configuration fields */
26#define usb_actconfig_show(field, multiplier, format_string) \ 223#define usb_actconfig_show(field, multiplier, format_string) \
27static ssize_t show_##field (struct device *dev, struct device_attribute *attr, char *buf) \ 224static ssize_t show_##field (struct device *dev, \
225 struct device_attribute *attr, char *buf) \
28{ \ 226{ \
29 struct usb_device *udev; \ 227 struct usb_device *udev; \
30 struct usb_host_config *actconfig; \ 228 struct usb_host_config *actconfig; \
@@ -46,22 +244,17 @@ usb_actconfig_attr (bNumInterfaces, 1, "%2d\n")
46usb_actconfig_attr (bmAttributes, 1, "%2x\n") 244usb_actconfig_attr (bmAttributes, 1, "%2x\n")
47usb_actconfig_attr (bMaxPower, 2, "%3dmA\n") 245usb_actconfig_attr (bMaxPower, 2, "%3dmA\n")
48 246
49static ssize_t show_configuration_string(struct device *dev, struct device_attribute *attr, char *buf) 247static ssize_t show_configuration_string(struct device *dev,
248 struct device_attribute *attr, char *buf)
50{ 249{
51 struct usb_device *udev; 250 struct usb_device *udev;
52 struct usb_host_config *actconfig; 251 struct usb_host_config *actconfig;
53 int len;
54 252
55 udev = to_usb_device (dev); 253 udev = to_usb_device (dev);
56 actconfig = udev->actconfig; 254 actconfig = udev->actconfig;
57 if ((!actconfig) || (!actconfig->string)) 255 if ((!actconfig) || (!actconfig->string))
58 return 0; 256 return 0;
59 len = sprintf(buf, actconfig->string, PAGE_SIZE); 257 return sprintf(buf, "%s\n", actconfig->string);
60 if (len < 0)
61 return 0;
62 buf[len] = '\n';
63 buf[len+1] = 0;
64 return len+1;
65} 258}
66static DEVICE_ATTR(configuration, S_IRUGO, show_configuration_string, NULL); 259static DEVICE_ATTR(configuration, S_IRUGO, show_configuration_string, NULL);
67 260
@@ -69,7 +262,8 @@ static DEVICE_ATTR(configuration, S_IRUGO, show_configuration_string, NULL);
69usb_actconfig_show(bConfigurationValue, 1, "%u\n"); 262usb_actconfig_show(bConfigurationValue, 1, "%u\n");
70 263
71static ssize_t 264static ssize_t
72set_bConfigurationValue (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 265set_bConfigurationValue (struct device *dev, struct device_attribute *attr,
266 const char *buf, size_t count)
73{ 267{
74 struct usb_device *udev = udev = to_usb_device (dev); 268 struct usb_device *udev = udev = to_usb_device (dev);
75 int config, value; 269 int config, value;
@@ -87,18 +281,13 @@ static DEVICE_ATTR(bConfigurationValue, S_IRUGO | S_IWUSR,
87 281
88/* String fields */ 282/* String fields */
89#define usb_string_attr(name) \ 283#define usb_string_attr(name) \
90static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \ 284static ssize_t show_##name(struct device *dev, \
285 struct device_attribute *attr, char *buf) \
91{ \ 286{ \
92 struct usb_device *udev; \ 287 struct usb_device *udev; \
93 int len; \
94 \ 288 \
95 udev = to_usb_device (dev); \ 289 udev = to_usb_device (dev); \
96 len = snprintf(buf, 256, "%s", udev->name); \ 290 return sprintf(buf, "%s\n", udev->name); \
97 if (len < 0) \
98 return 0; \
99 buf[len] = '\n'; \
100 buf[len+1] = 0; \
101 return len+1; \
102} \ 291} \
103static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL); 292static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL);
104 293
@@ -167,7 +356,8 @@ static DEVICE_ATTR(maxchild, S_IRUGO, show_maxchild, NULL);
167/* Descriptor fields */ 356/* Descriptor fields */
168#define usb_descriptor_attr_le16(field, format_string) \ 357#define usb_descriptor_attr_le16(field, format_string) \
169static ssize_t \ 358static ssize_t \
170show_##field (struct device *dev, struct device_attribute *attr, char *buf) \ 359show_##field (struct device *dev, struct device_attribute *attr, \
360 char *buf) \
171{ \ 361{ \
172 struct usb_device *udev; \ 362 struct usb_device *udev; \
173 \ 363 \
@@ -183,7 +373,8 @@ usb_descriptor_attr_le16(bcdDevice, "%04x\n")
183 373
184#define usb_descriptor_attr(field, format_string) \ 374#define usb_descriptor_attr(field, format_string) \
185static ssize_t \ 375static ssize_t \
186show_##field (struct device *dev, struct device_attribute *attr, char *buf) \ 376show_##field (struct device *dev, struct device_attribute *attr, \
377 char *buf) \
187{ \ 378{ \
188 struct usb_device *udev; \ 379 struct usb_device *udev; \
189 \ 380 \
@@ -236,19 +427,21 @@ void usb_create_sysfs_dev_files (struct usb_device *udev)
236 if (udev->serial) 427 if (udev->serial)
237 device_create_file (dev, &dev_attr_serial); 428 device_create_file (dev, &dev_attr_serial);
238 device_create_file (dev, &dev_attr_configuration); 429 device_create_file (dev, &dev_attr_configuration);
430 usb_create_ep_files(&dev->kobj, &udev->ep0, udev);
239} 431}
240 432
241void usb_remove_sysfs_dev_files (struct usb_device *udev) 433void usb_remove_sysfs_dev_files (struct usb_device *udev)
242{ 434{
243 struct device *dev = &udev->dev; 435 struct device *dev = &udev->dev;
244 436
437 usb_remove_ep_files(&udev->ep0);
245 sysfs_remove_group(&dev->kobj, &dev_attr_grp); 438 sysfs_remove_group(&dev->kobj, &dev_attr_grp);
246 439
247 if (udev->descriptor.iManufacturer) 440 if (udev->manufacturer)
248 device_remove_file(dev, &dev_attr_manufacturer); 441 device_remove_file(dev, &dev_attr_manufacturer);
249 if (udev->descriptor.iProduct) 442 if (udev->product)
250 device_remove_file(dev, &dev_attr_product); 443 device_remove_file(dev, &dev_attr_product);
251 if (udev->descriptor.iSerialNumber) 444 if (udev->serial)
252 device_remove_file(dev, &dev_attr_serial); 445 device_remove_file(dev, &dev_attr_serial);
253 device_remove_file (dev, &dev_attr_configuration); 446 device_remove_file (dev, &dev_attr_configuration);
254} 447}
@@ -256,11 +449,13 @@ void usb_remove_sysfs_dev_files (struct usb_device *udev)
256/* Interface fields */ 449/* Interface fields */
257#define usb_intf_attr(field, format_string) \ 450#define usb_intf_attr(field, format_string) \
258static ssize_t \ 451static ssize_t \
259show_##field (struct device *dev, struct device_attribute *attr, char *buf) \ 452show_##field (struct device *dev, struct device_attribute *attr, \
453 char *buf) \
260{ \ 454{ \
261 struct usb_interface *intf = to_usb_interface (dev); \ 455 struct usb_interface *intf = to_usb_interface (dev); \
262 \ 456 \
263 return sprintf (buf, format_string, intf->cur_altsetting->desc.field); \ 457 return sprintf (buf, format_string, \
458 intf->cur_altsetting->desc.field); \
264} \ 459} \
265static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL); 460static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
266 461
@@ -271,7 +466,8 @@ usb_intf_attr (bInterfaceClass, "%02x\n")
271usb_intf_attr (bInterfaceSubClass, "%02x\n") 466usb_intf_attr (bInterfaceSubClass, "%02x\n")
272usb_intf_attr (bInterfaceProtocol, "%02x\n") 467usb_intf_attr (bInterfaceProtocol, "%02x\n")
273 468
274static ssize_t show_interface_string(struct device *dev, struct device_attribute *attr, char *buf) 469static ssize_t show_interface_string(struct device *dev,
470 struct device_attribute *attr, char *buf)
275{ 471{
276 struct usb_interface *intf; 472 struct usb_interface *intf;
277 struct usb_device *udev; 473 struct usb_device *udev;
@@ -288,34 +484,28 @@ static ssize_t show_interface_string(struct device *dev, struct device_attribute
288} 484}
289static DEVICE_ATTR(interface, S_IRUGO, show_interface_string, NULL); 485static DEVICE_ATTR(interface, S_IRUGO, show_interface_string, NULL);
290 486
291static ssize_t show_modalias(struct device *dev, struct device_attribute *attr, char *buf) 487static ssize_t show_modalias(struct device *dev,
488 struct device_attribute *attr, char *buf)
292{ 489{
293 struct usb_interface *intf; 490 struct usb_interface *intf;
294 struct usb_device *udev; 491 struct usb_device *udev;
295 int len; 492 struct usb_host_interface *alt;
296 493
297 intf = to_usb_interface(dev); 494 intf = to_usb_interface(dev);
298 udev = interface_to_usbdev(intf); 495 udev = interface_to_usbdev(intf);
299 496 alt = intf->cur_altsetting;
300 len = sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic", 497
301 le16_to_cpu(udev->descriptor.idVendor), 498 return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02X"
302 le16_to_cpu(udev->descriptor.idProduct), 499 "ic%02Xisc%02Xip%02X\n",
303 le16_to_cpu(udev->descriptor.bcdDevice), 500 le16_to_cpu(udev->descriptor.idVendor),
304 udev->descriptor.bDeviceClass, 501 le16_to_cpu(udev->descriptor.idProduct),
305 udev->descriptor.bDeviceSubClass, 502 le16_to_cpu(udev->descriptor.bcdDevice),
306 udev->descriptor.bDeviceProtocol); 503 udev->descriptor.bDeviceClass,
307 buf += len; 504 udev->descriptor.bDeviceSubClass,
308 505 udev->descriptor.bDeviceProtocol,
309 if (udev->descriptor.bDeviceClass == 0) { 506 alt->desc.bInterfaceClass,
310 struct usb_host_interface *alt = intf->cur_altsetting; 507 alt->desc.bInterfaceSubClass,
311 508 alt->desc.bInterfaceProtocol);
312 return len + sprintf(buf, "%02Xisc%02Xip%02X\n",
313 alt->desc.bInterfaceClass,
314 alt->desc.bInterfaceSubClass,
315 alt->desc.bInterfaceProtocol);
316 } else {
317 return len + sprintf(buf, "*isc*ip*\n");
318 }
319} 509}
320static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL); 510static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
321 511
@@ -333,20 +523,47 @@ static struct attribute_group intf_attr_grp = {
333 .attrs = intf_attrs, 523 .attrs = intf_attrs,
334}; 524};
335 525
526static inline void usb_create_intf_ep_files(struct usb_interface *intf,
527 struct usb_device *udev)
528{
529 struct usb_host_interface *iface_desc;
530 int i;
531
532 iface_desc = intf->cur_altsetting;
533 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i)
534 usb_create_ep_files(&intf->dev.kobj, &iface_desc->endpoint[i],
535 udev);
536}
537
538static inline void usb_remove_intf_ep_files(struct usb_interface *intf)
539{
540 struct usb_host_interface *iface_desc;
541 int i;
542
543 iface_desc = intf->cur_altsetting;
544 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i)
545 usb_remove_ep_files(&iface_desc->endpoint[i]);
546}
547
336void usb_create_sysfs_intf_files (struct usb_interface *intf) 548void usb_create_sysfs_intf_files (struct usb_interface *intf)
337{ 549{
550 struct usb_device *udev = interface_to_usbdev(intf);
551 struct usb_host_interface *alt = intf->cur_altsetting;
552
338 sysfs_create_group(&intf->dev.kobj, &intf_attr_grp); 553 sysfs_create_group(&intf->dev.kobj, &intf_attr_grp);
339 554
340 if (intf->cur_altsetting->string) 555 if (alt->string == NULL)
556 alt->string = usb_cache_string(udev, alt->desc.iInterface);
557 if (alt->string)
341 device_create_file(&intf->dev, &dev_attr_interface); 558 device_create_file(&intf->dev, &dev_attr_interface);
342 559 usb_create_intf_ep_files(intf, udev);
343} 560}
344 561
345void usb_remove_sysfs_intf_files (struct usb_interface *intf) 562void usb_remove_sysfs_intf_files (struct usb_interface *intf)
346{ 563{
564 usb_remove_intf_ep_files(intf);
347 sysfs_remove_group(&intf->dev.kobj, &intf_attr_grp); 565 sysfs_remove_group(&intf->dev.kobj, &intf_attr_grp);
348 566
349 if (intf->cur_altsetting->string) 567 if (intf->cur_altsetting->string)
350 device_remove_file(&intf->dev, &dev_attr_interface); 568 device_remove_file(&intf->dev, &dev_attr_interface);
351
352} 569}
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index b32898e0a27d..f2a1fed2a802 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -237,7 +237,8 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
237 (dev->state < USB_STATE_DEFAULT) || 237 (dev->state < USB_STATE_DEFAULT) ||
238 (!dev->bus) || (dev->devnum <= 0)) 238 (!dev->bus) || (dev->devnum <= 0))
239 return -ENODEV; 239 return -ENODEV;
240 if (dev->state == USB_STATE_SUSPENDED) 240 if (dev->bus->controller->power.power_state.event != PM_EVENT_ON
241 || dev->state == USB_STATE_SUSPENDED)
241 return -EHOSTUNREACH; 242 return -EHOSTUNREACH;
242 if (!(op = dev->bus->op) || !op->submit_urb) 243 if (!(op = dev->bus->op) || !op->submit_urb)
243 return -ENODEV; 244 return -ENODEV;
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 4c57f3f649ed..0eefff7bcb3c 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -107,10 +107,19 @@ static int usb_probe_interface(struct device *dev)
107 id = usb_match_id (intf, driver->id_table); 107 id = usb_match_id (intf, driver->id_table);
108 if (id) { 108 if (id) {
109 dev_dbg (dev, "%s - got id\n", __FUNCTION__); 109 dev_dbg (dev, "%s - got id\n", __FUNCTION__);
110
111 /* Interface "power state" doesn't correspond to any hardware
112 * state whatsoever. We use it to record when it's bound to
113 * a driver that may start I/0: it's not frozen/quiesced.
114 */
115 mark_active(intf);
110 intf->condition = USB_INTERFACE_BINDING; 116 intf->condition = USB_INTERFACE_BINDING;
111 error = driver->probe (intf, id); 117 error = driver->probe (intf, id);
112 intf->condition = error ? USB_INTERFACE_UNBOUND : 118 if (error) {
113 USB_INTERFACE_BOUND; 119 mark_quiesced(intf);
120 intf->condition = USB_INTERFACE_UNBOUND;
121 } else
122 intf->condition = USB_INTERFACE_BOUND;
114 } 123 }
115 124
116 return error; 125 return error;
@@ -136,6 +145,7 @@ static int usb_unbind_interface(struct device *dev)
136 0); 145 0);
137 usb_set_intfdata(intf, NULL); 146 usb_set_intfdata(intf, NULL);
138 intf->condition = USB_INTERFACE_UNBOUND; 147 intf->condition = USB_INTERFACE_UNBOUND;
148 mark_quiesced(intf);
139 149
140 return 0; 150 return 0;
141} 151}
@@ -299,6 +309,7 @@ int usb_driver_claim_interface(struct usb_driver *driver,
299 dev->driver = &driver->driver; 309 dev->driver = &driver->driver;
300 usb_set_intfdata(iface, priv); 310 usb_set_intfdata(iface, priv);
301 iface->condition = USB_INTERFACE_BOUND; 311 iface->condition = USB_INTERFACE_BOUND;
312 mark_active(iface);
302 313
303 /* if interface was already added, bind now; else let 314 /* if interface was already added, bind now; else let
304 * the future device_add() bind it, bypassing probe() 315 * the future device_add() bind it, bypassing probe()
@@ -345,6 +356,7 @@ void usb_driver_release_interface(struct usb_driver *driver,
345 dev->driver = NULL; 356 dev->driver = NULL;
346 usb_set_intfdata(iface, NULL); 357 usb_set_intfdata(iface, NULL);
347 iface->condition = USB_INTERFACE_UNBOUND; 358 iface->condition = USB_INTERFACE_UNBOUND;
359 mark_quiesced(iface);
348} 360}
349 361
350/** 362/**
@@ -557,6 +569,7 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp,
557{ 569{
558 struct usb_interface *intf; 570 struct usb_interface *intf;
559 struct usb_device *usb_dev; 571 struct usb_device *usb_dev;
572 struct usb_host_interface *alt;
560 int i = 0; 573 int i = 0;
561 int length = 0; 574 int length = 0;
562 575
@@ -573,7 +586,8 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp,
573 586
574 intf = to_usb_interface(dev); 587 intf = to_usb_interface(dev);
575 usb_dev = interface_to_usbdev (intf); 588 usb_dev = interface_to_usbdev (intf);
576 589 alt = intf->cur_altsetting;
590
577 if (usb_dev->devnum < 0) { 591 if (usb_dev->devnum < 0) {
578 pr_debug ("usb %s: already deleted?\n", dev->bus_id); 592 pr_debug ("usb %s: already deleted?\n", dev->bus_id);
579 return -ENODEV; 593 return -ENODEV;
@@ -615,46 +629,27 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp,
615 usb_dev->descriptor.bDeviceProtocol)) 629 usb_dev->descriptor.bDeviceProtocol))
616 return -ENOMEM; 630 return -ENOMEM;
617 631
618 if (usb_dev->descriptor.bDeviceClass == 0) { 632 if (add_hotplug_env_var(envp, num_envp, &i,
619 struct usb_host_interface *alt = intf->cur_altsetting; 633 buffer, buffer_size, &length,
634 "INTERFACE=%d/%d/%d",
635 alt->desc.bInterfaceClass,
636 alt->desc.bInterfaceSubClass,
637 alt->desc.bInterfaceProtocol))
638 return -ENOMEM;
620 639
621 /* 2.4 only exposed interface zero. in 2.5, hotplug 640 if (add_hotplug_env_var(envp, num_envp, &i,
622 * agents are called for all interfaces, and can use 641 buffer, buffer_size, &length,
623 * $DEVPATH/bInterfaceNumber if necessary. 642 "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
624 */ 643 le16_to_cpu(usb_dev->descriptor.idVendor),
625 if (add_hotplug_env_var(envp, num_envp, &i, 644 le16_to_cpu(usb_dev->descriptor.idProduct),
626 buffer, buffer_size, &length, 645 le16_to_cpu(usb_dev->descriptor.bcdDevice),
627 "INTERFACE=%d/%d/%d", 646 usb_dev->descriptor.bDeviceClass,
628 alt->desc.bInterfaceClass, 647 usb_dev->descriptor.bDeviceSubClass,
629 alt->desc.bInterfaceSubClass, 648 usb_dev->descriptor.bDeviceProtocol,
630 alt->desc.bInterfaceProtocol)) 649 alt->desc.bInterfaceClass,
631 return -ENOMEM; 650 alt->desc.bInterfaceSubClass,
632 651 alt->desc.bInterfaceProtocol))
633 if (add_hotplug_env_var(envp, num_envp, &i, 652 return -ENOMEM;
634 buffer, buffer_size, &length,
635 "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
636 le16_to_cpu(usb_dev->descriptor.idVendor),
637 le16_to_cpu(usb_dev->descriptor.idProduct),
638 le16_to_cpu(usb_dev->descriptor.bcdDevice),
639 usb_dev->descriptor.bDeviceClass,
640 usb_dev->descriptor.bDeviceSubClass,
641 usb_dev->descriptor.bDeviceProtocol,
642 alt->desc.bInterfaceClass,
643 alt->desc.bInterfaceSubClass,
644 alt->desc.bInterfaceProtocol))
645 return -ENOMEM;
646 } else {
647 if (add_hotplug_env_var(envp, num_envp, &i,
648 buffer, buffer_size, &length,
649 "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic*isc*ip*",
650 le16_to_cpu(usb_dev->descriptor.idVendor),
651 le16_to_cpu(usb_dev->descriptor.idProduct),
652 le16_to_cpu(usb_dev->descriptor.bcdDevice),
653 usb_dev->descriptor.bDeviceClass,
654 usb_dev->descriptor.bDeviceSubClass,
655 usb_dev->descriptor.bDeviceProtocol))
656 return -ENOMEM;
657 }
658 653
659 envp[i] = NULL; 654 envp[i] = NULL;
660 655
@@ -709,12 +704,10 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
709{ 704{
710 struct usb_device *dev; 705 struct usb_device *dev;
711 706
712 dev = kmalloc(sizeof(*dev), GFP_KERNEL); 707 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
713 if (!dev) 708 if (!dev)
714 return NULL; 709 return NULL;
715 710
716 memset(dev, 0, sizeof(*dev));
717
718 bus = usb_bus_get(bus); 711 bus = usb_bus_get(bus);
719 if (!bus) { 712 if (!bus) {
720 kfree(dev); 713 kfree(dev);
@@ -1402,13 +1395,30 @@ void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe,
1402 usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE); 1395 usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
1403} 1396}
1404 1397
1398static int verify_suspended(struct device *dev, void *unused)
1399{
1400 return (dev->power.power_state.event == PM_EVENT_ON) ? -EBUSY : 0;
1401}
1402
1405static int usb_generic_suspend(struct device *dev, pm_message_t message) 1403static int usb_generic_suspend(struct device *dev, pm_message_t message)
1406{ 1404{
1407 struct usb_interface *intf; 1405 struct usb_interface *intf;
1408 struct usb_driver *driver; 1406 struct usb_driver *driver;
1407 int status;
1409 1408
1410 if (dev->driver == &usb_generic_driver) 1409 /* USB devices enter SUSPEND state through their hubs, but can be
1411 return usb_suspend_device (to_usb_device(dev), message); 1410 * marked for FREEZE as soon as their children are already idled.
1411 * But those semantics are useless, so we equate the two (sigh).
1412 */
1413 if (dev->driver == &usb_generic_driver) {
1414 if (dev->power.power_state.event == message.event)
1415 return 0;
1416 /* we need to rule out bogus requests through sysfs */
1417 status = device_for_each_child(dev, NULL, verify_suspended);
1418 if (status)
1419 return status;
1420 return usb_suspend_device (to_usb_device(dev));
1421 }
1412 1422
1413 if ((dev->driver == NULL) || 1423 if ((dev->driver == NULL) ||
1414 (dev->driver_data == &usb_generic_driver_data)) 1424 (dev->driver_data == &usb_generic_driver_data))
@@ -1417,23 +1427,44 @@ static int usb_generic_suspend(struct device *dev, pm_message_t message)
1417 intf = to_usb_interface(dev); 1427 intf = to_usb_interface(dev);
1418 driver = to_usb_driver(dev->driver); 1428 driver = to_usb_driver(dev->driver);
1419 1429
1420 /* there's only one USB suspend state */ 1430 /* with no hardware, USB interfaces only use FREEZE and ON states */
1421 if (intf->dev.power.power_state.event) 1431 if (!is_active(intf))
1422 return 0; 1432 return 0;
1423 1433
1424 if (driver->suspend) 1434 if (driver->suspend && driver->resume) {
1425 return driver->suspend(intf, message); 1435 status = driver->suspend(intf, message);
1426 return 0; 1436 if (status)
1437 dev_err(dev, "%s error %d\n", "suspend", status);
1438 else
1439 mark_quiesced(intf);
1440 } else {
1441 // FIXME else if there's no suspend method, disconnect...
1442 dev_warn(dev, "no %s?\n", "suspend");
1443 status = 0;
1444 }
1445 return status;
1427} 1446}
1428 1447
1429static int usb_generic_resume(struct device *dev) 1448static int usb_generic_resume(struct device *dev)
1430{ 1449{
1431 struct usb_interface *intf; 1450 struct usb_interface *intf;
1432 struct usb_driver *driver; 1451 struct usb_driver *driver;
1452 struct usb_device *udev;
1453 int status;
1433 1454
1434 /* devices resume through their hub */ 1455 if (dev->power.power_state.event == PM_EVENT_ON)
1435 if (dev->driver == &usb_generic_driver) 1456 return 0;
1457
1458 /* mark things as "on" immediately, no matter what errors crop up */
1459 dev->power.power_state.event = PM_EVENT_ON;
1460
1461 /* devices resume through their hubs */
1462 if (dev->driver == &usb_generic_driver) {
1463 udev = to_usb_device(dev);
1464 if (udev->state == USB_STATE_NOTATTACHED)
1465 return 0;
1436 return usb_resume_device (to_usb_device(dev)); 1466 return usb_resume_device (to_usb_device(dev));
1467 }
1437 1468
1438 if ((dev->driver == NULL) || 1469 if ((dev->driver == NULL) ||
1439 (dev->driver_data == &usb_generic_driver_data)) 1470 (dev->driver_data == &usb_generic_driver_data))
@@ -1442,8 +1473,22 @@ static int usb_generic_resume(struct device *dev)
1442 intf = to_usb_interface(dev); 1473 intf = to_usb_interface(dev);
1443 driver = to_usb_driver(dev->driver); 1474 driver = to_usb_driver(dev->driver);
1444 1475
1445 if (driver->resume) 1476 udev = interface_to_usbdev(intf);
1446 return driver->resume(intf); 1477 if (udev->state == USB_STATE_NOTATTACHED)
1478 return 0;
1479
1480 /* if driver was suspended, it has a resume method;
1481 * however, sysfs can wrongly mark things as suspended
1482 * (on the "no suspend method" FIXME path above)
1483 */
1484 if (driver->resume) {
1485 status = driver->resume(intf);
1486 if (status) {
1487 dev_err(dev, "%s error %d\n", "resume", status);
1488 mark_quiesced(intf);
1489 }
1490 } else
1491 dev_warn(dev, "no %s?\n", "resume");
1447 return 0; 1492 return 0;
1448} 1493}
1449 1494
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index e6504f3370ad..1c4a68499dce 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -13,12 +13,14 @@ extern void usb_disable_device (struct usb_device *dev, int skip_ep0);
13 13
14extern int usb_get_device_descriptor(struct usb_device *dev, 14extern int usb_get_device_descriptor(struct usb_device *dev,
15 unsigned int size); 15 unsigned int size);
16extern char *usb_cache_string(struct usb_device *udev, int index);
16extern int usb_set_configuration(struct usb_device *dev, int configuration); 17extern int usb_set_configuration(struct usb_device *dev, int configuration);
17 18
18extern void usb_lock_all_devices(void); 19extern void usb_lock_all_devices(void);
19extern void usb_unlock_all_devices(void); 20extern void usb_unlock_all_devices(void);
20 21
21extern void usb_kick_khubd(struct usb_device *dev); 22extern void usb_kick_khubd(struct usb_device *dev);
23extern void usb_suspend_root_hub(struct usb_device *hdev);
22extern void usb_resume_root_hub(struct usb_device *dev); 24extern void usb_resume_root_hub(struct usb_device *dev);
23 25
24extern int usb_hub_init(void); 26extern int usb_hub_init(void);
@@ -28,6 +30,28 @@ extern void usb_major_cleanup(void);
28extern int usb_host_init(void); 30extern int usb_host_init(void);
29extern void usb_host_cleanup(void); 31extern void usb_host_cleanup(void);
30 32
33extern int usb_suspend_device(struct usb_device *dev);
34extern int usb_resume_device(struct usb_device *dev);
35
36
37/* Interfaces and their "power state" are owned by usbcore */
38
39static inline void mark_active(struct usb_interface *f)
40{
41 f->dev.power.power_state.event = PM_EVENT_ON;
42}
43
44static inline void mark_quiesced(struct usb_interface *f)
45{
46 f->dev.power.power_state.event = PM_EVENT_FREEZE;
47}
48
49static inline int is_active(struct usb_interface *f)
50{
51 return f->dev.power.power_state.event == PM_EVENT_ON;
52}
53
54
31/* for labeling diagnostics */ 55/* for labeling diagnostics */
32extern const char *usbcore_name; 56extern const char *usbcore_name;
33 57
@@ -39,9 +63,6 @@ extern void usbfs_conn_disc_event(void);
39 63
40extern int usbdev_init(void); 64extern int usbdev_init(void);
41extern void usbdev_cleanup(void); 65extern void usbdev_cleanup(void);
42extern void usbdev_add(struct usb_device *dev);
43extern void usbdev_remove(struct usb_device *dev);
44extern struct usb_device *usbdev_lookup_minor(int minor);
45 66
46struct dev_state { 67struct dev_state {
47 struct list_head list; /* state list */ 68 struct list_head list; /* state list */
@@ -58,3 +79,9 @@ struct dev_state {
58 unsigned long ifclaimed; 79 unsigned long ifclaimed;
59}; 80};
60 81
82/* internal notify stuff */
83extern void usb_notify_add_device(struct usb_device *udev);
84extern void usb_notify_remove_device(struct usb_device *udev);
85extern void usb_notify_add_bus(struct usb_bus *ubus);
86extern void usb_notify_remove_bus(struct usb_bus *ubus);
87
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 503201764f6b..02106bebd5c1 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -967,6 +967,7 @@ static int dummy_udc_resume (struct device *dev)
967 967
968static struct device_driver dummy_udc_driver = { 968static struct device_driver dummy_udc_driver = {
969 .name = (char *) gadget_name, 969 .name = (char *) gadget_name,
970 .owner = THIS_MODULE,
970 .bus = &platform_bus_type, 971 .bus = &platform_bus_type,
971 .probe = dummy_udc_probe, 972 .probe = dummy_udc_probe,
972 .remove = dummy_udc_remove, 973 .remove = dummy_udc_remove,
@@ -1751,7 +1752,7 @@ static int dummy_hub_control (
1751 return retval; 1752 return retval;
1752} 1753}
1753 1754
1754static int dummy_hub_suspend (struct usb_hcd *hcd) 1755static int dummy_bus_suspend (struct usb_hcd *hcd)
1755{ 1756{
1756 struct dummy *dum = hcd_to_dummy (hcd); 1757 struct dummy *dum = hcd_to_dummy (hcd);
1757 1758
@@ -1762,7 +1763,7 @@ static int dummy_hub_suspend (struct usb_hcd *hcd)
1762 return 0; 1763 return 0;
1763} 1764}
1764 1765
1765static int dummy_hub_resume (struct usb_hcd *hcd) 1766static int dummy_bus_resume (struct usb_hcd *hcd)
1766{ 1767{
1767 struct dummy *dum = hcd_to_dummy (hcd); 1768 struct dummy *dum = hcd_to_dummy (hcd);
1768 1769
@@ -1894,8 +1895,8 @@ static const struct hc_driver dummy_hcd = {
1894 1895
1895 .hub_status_data = dummy_hub_status, 1896 .hub_status_data = dummy_hub_status,
1896 .hub_control = dummy_hub_control, 1897 .hub_control = dummy_hub_control,
1897 .hub_suspend = dummy_hub_suspend, 1898 .bus_suspend = dummy_bus_suspend,
1898 .hub_resume = dummy_hub_resume, 1899 .bus_resume = dummy_bus_resume,
1899}; 1900};
1900 1901
1901static int dummy_hcd_probe (struct device *dev) 1902static int dummy_hcd_probe (struct device *dev)
@@ -1936,13 +1937,6 @@ static int dummy_hcd_suspend (struct device *dev, pm_message_t state)
1936 dev_dbg (dev, "%s\n", __FUNCTION__); 1937 dev_dbg (dev, "%s\n", __FUNCTION__);
1937 hcd = dev_get_drvdata (dev); 1938 hcd = dev_get_drvdata (dev);
1938 1939
1939#ifndef CONFIG_USB_SUSPEND
1940 /* Otherwise this would never happen */
1941 usb_lock_device (hcd->self.root_hub);
1942 dummy_hub_suspend (hcd);
1943 usb_unlock_device (hcd->self.root_hub);
1944#endif
1945
1946 hcd->state = HC_STATE_SUSPENDED; 1940 hcd->state = HC_STATE_SUSPENDED;
1947 return 0; 1941 return 0;
1948} 1942}
@@ -1955,19 +1949,13 @@ static int dummy_hcd_resume (struct device *dev)
1955 hcd = dev_get_drvdata (dev); 1949 hcd = dev_get_drvdata (dev);
1956 hcd->state = HC_STATE_RUNNING; 1950 hcd->state = HC_STATE_RUNNING;
1957 1951
1958#ifndef CONFIG_USB_SUSPEND
1959 /* Otherwise this would never happen */
1960 usb_lock_device (hcd->self.root_hub);
1961 dummy_hub_resume (hcd);
1962 usb_unlock_device (hcd->self.root_hub);
1963#endif
1964
1965 usb_hcd_poll_rh_status (hcd); 1952 usb_hcd_poll_rh_status (hcd);
1966 return 0; 1953 return 0;
1967} 1954}
1968 1955
1969static struct device_driver dummy_hcd_driver = { 1956static struct device_driver dummy_hcd_driver = {
1970 .name = (char *) driver_name, 1957 .name = (char *) driver_name,
1958 .owner = THIS_MODULE,
1971 .bus = &platform_bus_type, 1959 .bus = &platform_bus_type,
1972 .probe = dummy_hcd_probe, 1960 .probe = dummy_hcd_probe,
1973 .remove = dummy_hcd_remove, 1961 .remove = dummy_hcd_remove,
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index f1024e804d5c..8f402f85e1ca 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -2533,6 +2533,7 @@ static struct usb_gadget_driver eth_driver = {
2533 2533
2534 .driver = { 2534 .driver = {
2535 .name = (char *) shortname, 2535 .name = (char *) shortname,
2536 .owner = THIS_MODULE,
2536 // .shutdown = ... 2537 // .shutdown = ...
2537 // .suspend = ... 2538 // .suspend = ...
2538 // .resume = ... 2539 // .resume = ...
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index a41d9d4baee3..ea09aaa3cab6 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -224,6 +224,7 @@
224#include <linux/fs.h> 224#include <linux/fs.h>
225#include <linux/init.h> 225#include <linux/init.h>
226#include <linux/kernel.h> 226#include <linux/kernel.h>
227#include <linux/kthread.h>
227#include <linux/limits.h> 228#include <linux/limits.h>
228#include <linux/list.h> 229#include <linux/list.h>
229#include <linux/module.h> 230#include <linux/module.h>
@@ -669,7 +670,6 @@ struct fsg_dev {
669 wait_queue_head_t thread_wqh; 670 wait_queue_head_t thread_wqh;
670 int thread_wakeup_needed; 671 int thread_wakeup_needed;
671 struct completion thread_notifier; 672 struct completion thread_notifier;
672 int thread_pid;
673 struct task_struct *thread_task; 673 struct task_struct *thread_task;
674 sigset_t thread_signal_mask; 674 sigset_t thread_signal_mask;
675 675
@@ -1084,7 +1084,6 @@ static void wakeup_thread(struct fsg_dev *fsg)
1084static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state) 1084static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
1085{ 1085{
1086 unsigned long flags; 1086 unsigned long flags;
1087 struct task_struct *thread_task;
1088 1087
1089 /* Do nothing if a higher-priority exception is already in progress. 1088 /* Do nothing if a higher-priority exception is already in progress.
1090 * If a lower-or-equal priority exception is in progress, preempt it 1089 * If a lower-or-equal priority exception is in progress, preempt it
@@ -1093,9 +1092,9 @@ static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
1093 if (fsg->state <= new_state) { 1092 if (fsg->state <= new_state) {
1094 fsg->exception_req_tag = fsg->ep0_req_tag; 1093 fsg->exception_req_tag = fsg->ep0_req_tag;
1095 fsg->state = new_state; 1094 fsg->state = new_state;
1096 thread_task = fsg->thread_task; 1095 if (fsg->thread_task)
1097 if (thread_task) 1096 send_sig_info(SIGUSR1, SEND_SIG_FORCED,
1098 send_sig_info(SIGUSR1, SEND_SIG_FORCED, thread_task); 1097 fsg->thread_task);
1099 } 1098 }
1100 spin_unlock_irqrestore(&fsg->lock, flags); 1099 spin_unlock_irqrestore(&fsg->lock, flags);
1101} 1100}
@@ -3383,11 +3382,6 @@ static int fsg_main_thread(void *fsg_)
3383{ 3382{
3384 struct fsg_dev *fsg = (struct fsg_dev *) fsg_; 3383 struct fsg_dev *fsg = (struct fsg_dev *) fsg_;
3385 3384
3386 fsg->thread_task = current;
3387
3388 /* Release all our userspace resources */
3389 daemonize("file-storage-gadget");
3390
3391 /* Allow the thread to be killed by a signal, but set the signal mask 3385 /* Allow the thread to be killed by a signal, but set the signal mask
3392 * to block everything but INT, TERM, KILL, and USR1. */ 3386 * to block everything but INT, TERM, KILL, and USR1. */
3393 siginitsetinv(&fsg->thread_signal_mask, sigmask(SIGINT) | 3387 siginitsetinv(&fsg->thread_signal_mask, sigmask(SIGINT) |
@@ -3400,9 +3394,6 @@ static int fsg_main_thread(void *fsg_)
3400 * that expects a __user pointer and it will work okay. */ 3394 * that expects a __user pointer and it will work okay. */
3401 set_fs(get_ds()); 3395 set_fs(get_ds());
3402 3396
3403 /* Wait for the gadget registration to finish up */
3404 wait_for_completion(&fsg->thread_notifier);
3405
3406 /* The main loop */ 3397 /* The main loop */
3407 while (fsg->state != FSG_STATE_TERMINATED) { 3398 while (fsg->state != FSG_STATE_TERMINATED) {
3408 if (exception_in_progress(fsg) || signal_pending(current)) { 3399 if (exception_in_progress(fsg) || signal_pending(current)) {
@@ -3440,8 +3431,9 @@ static int fsg_main_thread(void *fsg_)
3440 spin_unlock_irq(&fsg->lock); 3431 spin_unlock_irq(&fsg->lock);
3441 } 3432 }
3442 3433
3434 spin_lock_irq(&fsg->lock);
3443 fsg->thread_task = NULL; 3435 fsg->thread_task = NULL;
3444 flush_signals(current); 3436 spin_unlock_irq(&fsg->lock);
3445 3437
3446 /* In case we are exiting because of a signal, unregister the 3438 /* In case we are exiting because of a signal, unregister the
3447 * gadget driver and close the backing file. */ 3439 * gadget driver and close the backing file. */
@@ -3831,12 +3823,11 @@ static int __init fsg_bind(struct usb_gadget *gadget)
3831 3823
3832 /* Create the LUNs, open their backing files, and register the 3824 /* Create the LUNs, open their backing files, and register the
3833 * LUN devices in sysfs. */ 3825 * LUN devices in sysfs. */
3834 fsg->luns = kmalloc(i * sizeof(struct lun), GFP_KERNEL); 3826 fsg->luns = kzalloc(i * sizeof(struct lun), GFP_KERNEL);
3835 if (!fsg->luns) { 3827 if (!fsg->luns) {
3836 rc = -ENOMEM; 3828 rc = -ENOMEM;
3837 goto out; 3829 goto out;
3838 } 3830 }
3839 memset(fsg->luns, 0, i * sizeof(struct lun));
3840 fsg->nluns = i; 3831 fsg->nluns = i;
3841 3832
3842 for (i = 0; i < fsg->nluns; ++i) { 3833 for (i = 0; i < fsg->nluns; ++i) {
@@ -3959,10 +3950,12 @@ static int __init fsg_bind(struct usb_gadget *gadget)
3959 sprintf(&serial[i], "%02X", c); 3950 sprintf(&serial[i], "%02X", c);
3960 } 3951 }
3961 3952
3962 if ((rc = kernel_thread(fsg_main_thread, fsg, (CLONE_VM | CLONE_FS | 3953 fsg->thread_task = kthread_create(fsg_main_thread, fsg,
3963 CLONE_FILES))) < 0) 3954 "file-storage-gadget");
3955 if (IS_ERR(fsg->thread_task)) {
3956 rc = PTR_ERR(fsg->thread_task);
3964 goto out; 3957 goto out;
3965 fsg->thread_pid = rc; 3958 }
3966 3959
3967 INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); 3960 INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
3968 INFO(fsg, "Number of LUNs=%d\n", fsg->nluns); 3961 INFO(fsg, "Number of LUNs=%d\n", fsg->nluns);
@@ -3994,7 +3987,12 @@ static int __init fsg_bind(struct usb_gadget *gadget)
3994 DBG(fsg, "removable=%d, stall=%d, buflen=%u\n", 3987 DBG(fsg, "removable=%d, stall=%d, buflen=%u\n",
3995 mod_data.removable, mod_data.can_stall, 3988 mod_data.removable, mod_data.can_stall,
3996 mod_data.buflen); 3989 mod_data.buflen);
3997 DBG(fsg, "I/O thread pid: %d\n", fsg->thread_pid); 3990 DBG(fsg, "I/O thread pid: %d\n", fsg->thread_task->pid);
3991
3992 set_bit(REGISTERED, &fsg->atomic_bitflags);
3993
3994 /* Tell the thread to start working */
3995 wake_up_process(fsg->thread_task);
3998 return 0; 3996 return 0;
3999 3997
4000autoconf_fail: 3998autoconf_fail:
@@ -4046,6 +4044,7 @@ static struct usb_gadget_driver fsg_driver = {
4046 4044
4047 .driver = { 4045 .driver = {
4048 .name = (char *) shortname, 4046 .name = (char *) shortname,
4047 .owner = THIS_MODULE,
4049 // .release = ... 4048 // .release = ...
4050 // .suspend = ... 4049 // .suspend = ...
4051 // .resume = ... 4050 // .resume = ...
@@ -4057,10 +4056,9 @@ static int __init fsg_alloc(void)
4057{ 4056{
4058 struct fsg_dev *fsg; 4057 struct fsg_dev *fsg;
4059 4058
4060 fsg = kmalloc(sizeof *fsg, GFP_KERNEL); 4059 fsg = kzalloc(sizeof *fsg, GFP_KERNEL);
4061 if (!fsg) 4060 if (!fsg)
4062 return -ENOMEM; 4061 return -ENOMEM;
4063 memset(fsg, 0, sizeof *fsg);
4064 spin_lock_init(&fsg->lock); 4062 spin_lock_init(&fsg->lock);
4065 init_rwsem(&fsg->filesem); 4063 init_rwsem(&fsg->filesem);
4066 init_waitqueue_head(&fsg->thread_wqh); 4064 init_waitqueue_head(&fsg->thread_wqh);
@@ -4086,15 +4084,9 @@ static int __init fsg_init(void)
4086 if ((rc = fsg_alloc()) != 0) 4084 if ((rc = fsg_alloc()) != 0)
4087 return rc; 4085 return rc;
4088 fsg = the_fsg; 4086 fsg = the_fsg;
4089 if ((rc = usb_gadget_register_driver(&fsg_driver)) != 0) { 4087 if ((rc = usb_gadget_register_driver(&fsg_driver)) != 0)
4090 fsg_free(fsg); 4088 fsg_free(fsg);
4091 return rc; 4089 return rc;
4092 }
4093 set_bit(REGISTERED, &fsg->atomic_bitflags);
4094
4095 /* Tell the thread to start working */
4096 complete(&fsg->thread_notifier);
4097 return 0;
4098} 4090}
4099module_init(fsg_init); 4091module_init(fsg_init);
4100 4092
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index b0f3cd63e3b9..654469778ab5 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1970,6 +1970,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids);
1970static struct pci_driver goku_pci_driver = { 1970static struct pci_driver goku_pci_driver = {
1971 .name = (char *) driver_name, 1971 .name = (char *) driver_name,
1972 .id_table = pci_ids, 1972 .id_table = pci_ids,
1973 .owner = THIS_MODULE,
1973 1974
1974 .probe = goku_probe, 1975 .probe = goku_probe,
1975 .remove = goku_remove, 1976 .remove = goku_remove,
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index 012d1e5f1524..9b3673904daf 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -2140,6 +2140,7 @@ static int lh7a40x_udc_remove(struct device *_dev)
2140 2140
2141static struct device_driver udc_driver = { 2141static struct device_driver udc_driver = {
2142 .name = (char *)driver_name, 2142 .name = (char *)driver_name,
2143 .owner = THIS_MODULE,
2143 .bus = &platform_bus_type, 2144 .bus = &platform_bus_type,
2144 .probe = lh7a40x_udc_probe, 2145 .probe = lh7a40x_udc_probe,
2145 .remove = lh7a40x_udc_remove 2146 .remove = lh7a40x_udc_remove
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index c32e1f7476da..0dc6bb00bf72 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2948,6 +2948,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids);
2948static struct pci_driver net2280_pci_driver = { 2948static struct pci_driver net2280_pci_driver = {
2949 .name = (char *) driver_name, 2949 .name = (char *) driver_name,
2950 .id_table = pci_ids, 2950 .id_table = pci_ids,
2951 .owner = THIS_MODULE,
2951 2952
2952 .probe = net2280_probe, 2953 .probe = net2280_probe,
2953 .remove = net2280_remove, 2954 .remove = net2280_remove,
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index b7885dc0f42f..41c96b0afbb3 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -691,7 +691,7 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
691} 691}
692 692
693static void 693static void
694finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status) 694finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status, int one)
695{ 695{
696 u16 count; 696 u16 count;
697 697
@@ -699,6 +699,8 @@ finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status)
699 ep->dma_counter = (u16) (req->req.dma + req->req.actual); 699 ep->dma_counter = (u16) (req->req.dma + req->req.actual);
700 count = dma_dest_len(ep, req->req.dma + req->req.actual); 700 count = dma_dest_len(ep, req->req.dma + req->req.actual);
701 count += req->req.actual; 701 count += req->req.actual;
702 if (one)
703 count--;
702 if (count <= req->req.length) 704 if (count <= req->req.length)
703 req->req.actual = count; 705 req->req.actual = count;
704 706
@@ -747,7 +749,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src)
747 if (!list_empty(&ep->queue)) { 749 if (!list_empty(&ep->queue)) {
748 req = container_of(ep->queue.next, 750 req = container_of(ep->queue.next,
749 struct omap_req, queue); 751 struct omap_req, queue);
750 finish_out_dma(ep, req, 0); 752 finish_out_dma(ep, req, 0, dman_stat & UDC_DMA_RX_SB);
751 } 753 }
752 UDC_IRQ_SRC_REG = UDC_RXN_EOT; 754 UDC_IRQ_SRC_REG = UDC_RXN_EOT;
753 755
@@ -925,7 +927,7 @@ static void dma_channel_release(struct omap_ep *ep)
925 while (UDC_RXDMA_CFG_REG & mask) 927 while (UDC_RXDMA_CFG_REG & mask)
926 udelay(10); 928 udelay(10);
927 if (req) 929 if (req)
928 finish_out_dma(ep, req, -ECONNRESET); 930 finish_out_dma(ep, req, -ECONNRESET, 0);
929 } 931 }
930 omap_free_dma(ep->lch); 932 omap_free_dma(ep->lch);
931 ep->dma_channel = 0; 933 ep->dma_channel = 0;
@@ -1786,8 +1788,12 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
1786 udc->driver->suspend(&udc->gadget); 1788 udc->driver->suspend(&udc->gadget);
1787 spin_lock(&udc->lock); 1789 spin_lock(&udc->lock);
1788 } 1790 }
1791 if (udc->transceiver)
1792 otg_set_suspend(udc->transceiver, 1);
1789 } else { 1793 } else {
1790 VDBG("resume\n"); 1794 VDBG("resume\n");
1795 if (udc->transceiver)
1796 otg_set_suspend(udc->transceiver, 0);
1791 if (udc->gadget.speed == USB_SPEED_FULL 1797 if (udc->gadget.speed == USB_SPEED_FULL
1792 && udc->driver->resume) { 1798 && udc->driver->resume) {
1793 spin_unlock(&udc->lock); 1799 spin_unlock(&udc->lock);
@@ -2943,6 +2949,7 @@ static int omap_udc_resume(struct device *dev)
2943 2949
2944static struct device_driver udc_driver = { 2950static struct device_driver udc_driver = {
2945 .name = (char *) driver_name, 2951 .name = (char *) driver_name,
2952 .owner = THIS_MODULE,
2946 .bus = &platform_bus_type, 2953 .bus = &platform_bus_type,
2947 .probe = omap_udc_probe, 2954 .probe = omap_udc_probe,
2948 .remove = __exit_p(omap_udc_remove), 2955 .remove = __exit_p(omap_udc_remove),
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 647028590b23..f83a9262f953 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -2631,6 +2631,7 @@ static int pxa2xx_udc_resume(struct device *dev)
2631 2631
2632static struct device_driver udc_driver = { 2632static struct device_driver udc_driver = {
2633 .name = "pxa2xx-udc", 2633 .name = "pxa2xx-udc",
2634 .owner = THIS_MODULE,
2634 .bus = &platform_bus_type, 2635 .bus = &platform_bus_type,
2635 .probe = pxa2xx_udc_probe, 2636 .probe = pxa2xx_udc_probe,
2636 .shutdown = pxa2xx_udc_shutdown, 2637 .shutdown = pxa2xx_udc_shutdown,
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index ec9c424f1d97..6c58636e914b 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -1302,6 +1302,7 @@ static struct usb_gadget_driver zero_driver = {
1302 1302
1303 .driver = { 1303 .driver = {
1304 .name = (char *) shortname, 1304 .name = (char *) shortname,
1305 .owner = THIS_MODULE,
1305 // .shutdown = ... 1306 // .shutdown = ...
1306 // .suspend = ... 1307 // .suspend = ...
1307 // .resume = ... 1308 // .resume = ...
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 350d14fc1cc9..58321d3f314c 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -1,8 +1,9 @@
1# 1#
2# Makefile for USB Host Controller Driver 2# Makefile for USB Host Controller Drivers
3# framework and drivers
4# 3#
5 4
5obj-$(CONFIG_PCI) += pci-quirks.o
6
6obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o 7obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
7obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o 8obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
8obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o 9obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index f5eb9e7b5b18..af3c05eb86fc 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -182,6 +182,9 @@ static int ehci_halt (struct ehci_hcd *ehci)
182{ 182{
183 u32 temp = readl (&ehci->regs->status); 183 u32 temp = readl (&ehci->regs->status);
184 184
185 /* disable any irqs left enabled by previous code */
186 writel (0, &ehci->regs->intr_enable);
187
185 if ((temp & STS_HALT) != 0) 188 if ((temp & STS_HALT) != 0)
186 return 0; 189 return 0;
187 190
@@ -297,50 +300,17 @@ static void ehci_watchdog (unsigned long param)
297 spin_unlock_irqrestore (&ehci->lock, flags); 300 spin_unlock_irqrestore (&ehci->lock, flags);
298} 301}
299 302
300#ifdef CONFIG_PCI 303/* Reboot notifiers kick in for silicon on any bus (not just pci, etc).
301 304 * This forcibly disables dma and IRQs, helping kexec and other cases
302/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/... 305 * where the next system software may expect clean state.
303 * off the controller (maybe it can boot from highspeed USB disks).
304 */ 306 */
305static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap)
306{
307 struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
308
309 /* always say Linux will own the hardware */
310 pci_write_config_byte(pdev, where + 3, 1);
311
312 /* maybe wait a while for BIOS to respond */
313 if (cap & (1 << 16)) {
314 int msec = 5000;
315
316 do {
317 msleep(10);
318 msec -= 10;
319 pci_read_config_dword(pdev, where, &cap);
320 } while ((cap & (1 << 16)) && msec);
321 if (cap & (1 << 16)) {
322 ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n",
323 where, cap);
324 // some BIOS versions seem buggy...
325 // return 1;
326 ehci_warn (ehci, "continuing after BIOS bug...\n");
327 /* disable all SMIs, and clear "BIOS owns" flag */
328 pci_write_config_dword(pdev, where + 4, 0);
329 pci_write_config_byte(pdev, where + 2, 0);
330 } else
331 ehci_dbg(ehci, "BIOS handoff succeeded\n");
332 }
333 return 0;
334}
335
336#endif
337
338static int 307static int
339ehci_reboot (struct notifier_block *self, unsigned long code, void *null) 308ehci_reboot (struct notifier_block *self, unsigned long code, void *null)
340{ 309{
341 struct ehci_hcd *ehci; 310 struct ehci_hcd *ehci;
342 311
343 ehci = container_of (self, struct ehci_hcd, reboot_notifier); 312 ehci = container_of (self, struct ehci_hcd, reboot_notifier);
313 (void) ehci_halt (ehci);
344 314
345 /* make BIOS/etc use companion controller during reboot */ 315 /* make BIOS/etc use companion controller during reboot */
346 writel (0, &ehci->regs->configured_flag); 316 writel (0, &ehci->regs->configured_flag);
@@ -363,156 +333,90 @@ static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
363 msleep(20); 333 msleep(20);
364} 334}
365 335
336/*-------------------------------------------------------------------------*/
337
338/*
339 * ehci_work is called from some interrupts, timers, and so on.
340 * it calls driver completion functions, after dropping ehci->lock.
341 */
342static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs)
343{
344 timer_action_done (ehci, TIMER_IO_WATCHDOG);
345 if (ehci->reclaim_ready)
346 end_unlink_async (ehci, regs);
347
348 /* another CPU may drop ehci->lock during a schedule scan while
349 * it reports urb completions. this flag guards against bogus
350 * attempts at re-entrant schedule scanning.
351 */
352 if (ehci->scanning)
353 return;
354 ehci->scanning = 1;
355 scan_async (ehci, regs);
356 if (ehci->next_uframe != -1)
357 scan_periodic (ehci, regs);
358 ehci->scanning = 0;
366 359
367/* called by khubd or root hub init threads */ 360 /* the IO watchdog guards against hardware or driver bugs that
361 * misplace IRQs, and should let us run completely without IRQs.
362 * such lossage has been observed on both VT6202 and VT8235.
363 */
364 if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) &&
365 (ehci->async->qh_next.ptr != NULL ||
366 ehci->periodic_sched != 0))
367 timer_action (ehci, TIMER_IO_WATCHDOG);
368}
368 369
369static int ehci_hc_reset (struct usb_hcd *hcd) 370static void ehci_stop (struct usb_hcd *hcd)
370{ 371{
371 struct ehci_hcd *ehci = hcd_to_ehci (hcd); 372 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
372 u32 temp;
373 unsigned count = 256/4;
374 373
375 spin_lock_init (&ehci->lock); 374 ehci_dbg (ehci, "stop\n");
376 375
377 ehci->caps = hcd->regs; 376 /* Turn off port power on all root hub ports. */
378 ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase)); 377 ehci_port_power (ehci, 0);
379 dbg_hcs_params (ehci, "reset");
380 dbg_hcc_params (ehci, "reset");
381 378
382 /* cache this readonly data; minimize chip reads */ 379 /* no more interrupts ... */
383 ehci->hcs_params = readl (&ehci->caps->hcs_params); 380 del_timer_sync (&ehci->watchdog);
384 381
385#ifdef CONFIG_PCI 382 spin_lock_irq(&ehci->lock);
386 if (hcd->self.controller->bus == &pci_bus_type) { 383 if (HC_IS_RUNNING (hcd->state))
387 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 384 ehci_quiesce (ehci);
388 385
389 switch (pdev->vendor) { 386 ehci_reset (ehci);
390 case PCI_VENDOR_ID_TDI: 387 writel (0, &ehci->regs->intr_enable);
391 if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { 388 spin_unlock_irq(&ehci->lock);
392 ehci->is_tdi_rh_tt = 1;
393 tdi_reset (ehci);
394 }
395 break;
396 case PCI_VENDOR_ID_AMD:
397 /* AMD8111 EHCI doesn't work, according to AMD errata */
398 if (pdev->device == 0x7463) {
399 ehci_info (ehci, "ignoring AMD8111 (errata)\n");
400 return -EIO;
401 }
402 break;
403 case PCI_VENDOR_ID_NVIDIA:
404 /* NVidia reports that certain chips don't handle
405 * QH, ITD, or SITD addresses above 2GB. (But TD,
406 * data buffer, and periodic schedule are normal.)
407 */
408 switch (pdev->device) {
409 case 0x003c: /* MCP04 */
410 case 0x005b: /* CK804 */
411 case 0x00d8: /* CK8 */
412 case 0x00e8: /* CK8S */
413 if (pci_set_consistent_dma_mask(pdev,
414 DMA_31BIT_MASK) < 0)
415 ehci_warn (ehci, "can't enable NVidia "
416 "workaround for >2GB RAM\n");
417 break;
418 }
419 break;
420 }
421 389
422 /* optional debug port, normally in the first BAR */ 390 /* let companion controllers work when we aren't */
423 temp = pci_find_capability (pdev, 0x0a); 391 writel (0, &ehci->regs->configured_flag);
424 if (temp) { 392 unregister_reboot_notifier (&ehci->reboot_notifier);
425 pci_read_config_dword(pdev, temp, &temp);
426 temp >>= 16;
427 if ((temp & (3 << 13)) == (1 << 13)) {
428 temp &= 0x1fff;
429 ehci->debug = hcd->regs + temp;
430 temp = readl (&ehci->debug->control);
431 ehci_info (ehci, "debug port %d%s\n",
432 HCS_DEBUG_PORT(ehci->hcs_params),
433 (temp & DBGP_ENABLED)
434 ? " IN USE"
435 : "");
436 if (!(temp & DBGP_ENABLED))
437 ehci->debug = NULL;
438 }
439 }
440 393
441 temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params)); 394 remove_debug_files (ehci);
442 } else
443 temp = 0;
444
445 /* EHCI 0.96 and later may have "extended capabilities" */
446 while (temp && count--) {
447 u32 cap;
448
449 pci_read_config_dword (to_pci_dev(hcd->self.controller),
450 temp, &cap);
451 ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp);
452 switch (cap & 0xff) {
453 case 1: /* BIOS/SMM/... handoff */
454 if (bios_handoff (ehci, temp, cap) != 0)
455 return -EOPNOTSUPP;
456 break;
457 case 0: /* illegal reserved capability */
458 ehci_warn (ehci, "illegal capability!\n");
459 cap = 0;
460 /* FALLTHROUGH */
461 default: /* unknown */
462 break;
463 }
464 temp = (cap >> 8) & 0xff;
465 }
466 if (!count) {
467 ehci_err (ehci, "bogus capabilities ... PCI problems!\n");
468 return -EIO;
469 }
470 if (ehci_is_TDI(ehci))
471 ehci_reset (ehci);
472#endif
473 395
474 ehci_port_power (ehci, 0); 396 /* root hub is shut down separately (first, when possible) */
397 spin_lock_irq (&ehci->lock);
398 if (ehci->async)
399 ehci_work (ehci, NULL);
400 spin_unlock_irq (&ehci->lock);
401 ehci_mem_cleanup (ehci);
475 402
476 /* at least the Genesys GL880S needs fixup here */ 403#ifdef EHCI_STATS
477 temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params); 404 ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
478 temp &= 0x0f; 405 ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
479 if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) { 406 ehci->stats.lost_iaa);
480 ehci_dbg (ehci, "bogus port configuration: " 407 ehci_dbg (ehci, "complete %ld unlink %ld\n",
481 "cc=%d x pcc=%d < ports=%d\n", 408 ehci->stats.complete, ehci->stats.unlink);
482 HCS_N_CC(ehci->hcs_params),
483 HCS_N_PCC(ehci->hcs_params),
484 HCS_N_PORTS(ehci->hcs_params));
485
486#ifdef CONFIG_PCI
487 if (hcd->self.controller->bus == &pci_bus_type) {
488 struct pci_dev *pdev;
489
490 pdev = to_pci_dev(hcd->self.controller);
491 switch (pdev->vendor) {
492 case 0x17a0: /* GENESYS */
493 /* GL880S: should be PORTS=2 */
494 temp |= (ehci->hcs_params & ~0xf);
495 ehci->hcs_params = temp;
496 break;
497 case PCI_VENDOR_ID_NVIDIA:
498 /* NF4: should be PCC=10 */
499 break;
500 }
501 }
502#endif 409#endif
503 }
504 410
505 /* force HC to halt state */ 411 dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status));
506 return ehci_halt (ehci);
507} 412}
508 413
509static int ehci_start (struct usb_hcd *hcd) 414static int ehci_run (struct usb_hcd *hcd)
510{ 415{
511 struct ehci_hcd *ehci = hcd_to_ehci (hcd); 416 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
512 u32 temp; 417 u32 temp;
513 int retval; 418 int retval;
514 u32 hcc_params; 419 u32 hcc_params;
515 u8 sbrn = 0;
516 int first; 420 int first;
517 421
518 /* skip some things on restart paths */ 422 /* skip some things on restart paths */
@@ -551,27 +455,6 @@ static int ehci_start (struct usb_hcd *hcd)
551 } 455 }
552 writel (ehci->periodic_dma, &ehci->regs->frame_list); 456 writel (ehci->periodic_dma, &ehci->regs->frame_list);
553 457
554#ifdef CONFIG_PCI
555 if (hcd->self.controller->bus == &pci_bus_type) {
556 struct pci_dev *pdev;
557 u16 port_wake;
558
559 pdev = to_pci_dev(hcd->self.controller);
560
561 /* Serial Bus Release Number is at PCI 0x60 offset */
562 pci_read_config_byte(pdev, 0x60, &sbrn);
563
564 /* port wake capability, reported by boot firmware */
565 pci_read_config_word(pdev, 0x62, &port_wake);
566 hcd->can_wakeup = (port_wake & 1) != 0;
567
568 /* help hc dma work well with cachelines */
569 retval = pci_set_mwi(pdev);
570 if (retval)
571 ehci_dbg(ehci, "unable to enable MWI - not fatal.\n");
572 }
573#endif
574
575 /* 458 /*
576 * dedicate a qh for the async ring head, since we couldn't unlink 459 * dedicate a qh for the async ring head, since we couldn't unlink
577 * a 'real' qh without stopping the async schedule [4.8]. use it 460 * a 'real' qh without stopping the async schedule [4.8]. use it
@@ -667,7 +550,7 @@ static int ehci_start (struct usb_hcd *hcd)
667 temp = HC_VERSION(readl (&ehci->caps->hc_capbase)); 550 temp = HC_VERSION(readl (&ehci->caps->hc_capbase));
668 ehci_info (ehci, 551 ehci_info (ehci,
669 "USB %x.%x %s, EHCI %x.%02x, driver %s\n", 552 "USB %x.%x %s, EHCI %x.%02x, driver %s\n",
670 ((sbrn & 0xf0)>>4), (sbrn & 0x0f), 553 ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
671 first ? "initialized" : "restarted", 554 first ? "initialized" : "restarted",
672 temp >> 8, temp & 0xff, DRIVER_VERSION); 555 temp >> 8, temp & 0xff, DRIVER_VERSION);
673 556
@@ -679,188 +562,6 @@ static int ehci_start (struct usb_hcd *hcd)
679 return 0; 562 return 0;
680} 563}
681 564
682/* always called by thread; normally rmmod */
683
684static void ehci_stop (struct usb_hcd *hcd)
685{
686 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
687
688 ehci_dbg (ehci, "stop\n");
689
690 /* Turn off port power on all root hub ports. */
691 ehci_port_power (ehci, 0);
692
693 /* no more interrupts ... */
694 del_timer_sync (&ehci->watchdog);
695
696 spin_lock_irq(&ehci->lock);
697 if (HC_IS_RUNNING (hcd->state))
698 ehci_quiesce (ehci);
699
700 ehci_reset (ehci);
701 writel (0, &ehci->regs->intr_enable);
702 spin_unlock_irq(&ehci->lock);
703
704 /* let companion controllers work when we aren't */
705 writel (0, &ehci->regs->configured_flag);
706 unregister_reboot_notifier (&ehci->reboot_notifier);
707
708 remove_debug_files (ehci);
709
710 /* root hub is shut down separately (first, when possible) */
711 spin_lock_irq (&ehci->lock);
712 if (ehci->async)
713 ehci_work (ehci, NULL);
714 spin_unlock_irq (&ehci->lock);
715 ehci_mem_cleanup (ehci);
716
717#ifdef EHCI_STATS
718 ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
719 ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
720 ehci->stats.lost_iaa);
721 ehci_dbg (ehci, "complete %ld unlink %ld\n",
722 ehci->stats.complete, ehci->stats.unlink);
723#endif
724
725 dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status));
726}
727
728static int ehci_get_frame (struct usb_hcd *hcd)
729{
730 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
731 return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size;
732}
733
734/*-------------------------------------------------------------------------*/
735
736#ifdef CONFIG_PM
737
738/* suspend/resume, section 4.3 */
739
740/* These routines rely on the bus (pci, platform, etc)
741 * to handle powerdown and wakeup, and currently also on
742 * transceivers that don't need any software attention to set up
743 * the right sort of wakeup.
744 */
745
746static int ehci_suspend (struct usb_hcd *hcd, pm_message_t message)
747{
748 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
749
750 if (time_before (jiffies, ehci->next_statechange))
751 msleep (100);
752
753#ifdef CONFIG_USB_SUSPEND
754 (void) usb_suspend_device (hcd->self.root_hub, message);
755#else
756 usb_lock_device (hcd->self.root_hub);
757 (void) ehci_hub_suspend (hcd);
758 usb_unlock_device (hcd->self.root_hub);
759#endif
760
761 // save (PCI) FLADJ in case of Vaux power loss
762 // ... we'd only use it to handle clock skew
763
764 return 0;
765}
766
767static int ehci_resume (struct usb_hcd *hcd)
768{
769 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
770 unsigned port;
771 struct usb_device *root = hcd->self.root_hub;
772 int retval = -EINVAL;
773
774 // maybe restore (PCI) FLADJ
775
776 if (time_before (jiffies, ehci->next_statechange))
777 msleep (100);
778
779 /* If any port is suspended (or owned by the companion),
780 * we know we can/must resume the HC (and mustn't reset it).
781 */
782 for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) {
783 u32 status;
784 port--;
785 status = readl (&ehci->regs->port_status [port]);
786 if (!(status & PORT_POWER))
787 continue;
788 if (status & (PORT_SUSPEND | PORT_OWNER)) {
789 down (&hcd->self.root_hub->serialize);
790 retval = ehci_hub_resume (hcd);
791 up (&hcd->self.root_hub->serialize);
792 break;
793 }
794 if (!root->children [port])
795 continue;
796 dbg_port (ehci, __FUNCTION__, port + 1, status);
797 usb_set_device_state (root->children[port],
798 USB_STATE_NOTATTACHED);
799 }
800
801 /* Else reset, to cope with power loss or flush-to-storage
802 * style "resume" having activated BIOS during reboot.
803 */
804 if (port == 0) {
805 (void) ehci_halt (ehci);
806 (void) ehci_reset (ehci);
807 (void) ehci_hc_reset (hcd);
808
809 /* emptying the schedule aborts any urbs */
810 spin_lock_irq (&ehci->lock);
811 if (ehci->reclaim)
812 ehci->reclaim_ready = 1;
813 ehci_work (ehci, NULL);
814 spin_unlock_irq (&ehci->lock);
815
816 /* restart; khubd will disconnect devices */
817 retval = ehci_start (hcd);
818
819 /* here we "know" root ports should always stay powered;
820 * but some controllers may lose all power.
821 */
822 ehci_port_power (ehci, 1);
823 }
824
825 return retval;
826}
827
828#endif
829
830/*-------------------------------------------------------------------------*/
831
832/*
833 * ehci_work is called from some interrupts, timers, and so on.
834 * it calls driver completion functions, after dropping ehci->lock.
835 */
836static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs)
837{
838 timer_action_done (ehci, TIMER_IO_WATCHDOG);
839 if (ehci->reclaim_ready)
840 end_unlink_async (ehci, regs);
841
842 /* another CPU may drop ehci->lock during a schedule scan while
843 * it reports urb completions. this flag guards against bogus
844 * attempts at re-entrant schedule scanning.
845 */
846 if (ehci->scanning)
847 return;
848 ehci->scanning = 1;
849 scan_async (ehci, regs);
850 if (ehci->next_uframe != -1)
851 scan_periodic (ehci, regs);
852 ehci->scanning = 0;
853
854 /* the IO watchdog guards against hardware or driver bugs that
855 * misplace IRQs, and should let us run completely without IRQs.
856 * such lossage has been observed on both VT6202 and VT8235.
857 */
858 if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) &&
859 (ehci->async->qh_next.ptr != NULL ||
860 ehci->periodic_sched != 0))
861 timer_action (ehci, TIMER_IO_WATCHDOG);
862}
863
864/*-------------------------------------------------------------------------*/ 565/*-------------------------------------------------------------------------*/
865 566
866static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs) 567static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
@@ -1171,106 +872,24 @@ done:
1171 return; 872 return;
1172} 873}
1173 874
1174/*-------------------------------------------------------------------------*/ 875static int ehci_get_frame (struct usb_hcd *hcd)
1175 876{
1176static const struct hc_driver ehci_driver = { 877 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
1177 .description = hcd_name, 878 return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size;
1178 .product_desc = "EHCI Host Controller", 879}
1179 .hcd_priv_size = sizeof(struct ehci_hcd),
1180
1181 /*
1182 * generic hardware linkage
1183 */
1184 .irq = ehci_irq,
1185 .flags = HCD_MEMORY | HCD_USB2,
1186
1187 /*
1188 * basic lifecycle operations
1189 */
1190 .reset = ehci_hc_reset,
1191 .start = ehci_start,
1192#ifdef CONFIG_PM
1193 .suspend = ehci_suspend,
1194 .resume = ehci_resume,
1195#endif
1196 .stop = ehci_stop,
1197
1198 /*
1199 * managing i/o requests and associated device resources
1200 */
1201 .urb_enqueue = ehci_urb_enqueue,
1202 .urb_dequeue = ehci_urb_dequeue,
1203 .endpoint_disable = ehci_endpoint_disable,
1204
1205 /*
1206 * scheduling support
1207 */
1208 .get_frame_number = ehci_get_frame,
1209
1210 /*
1211 * root hub support
1212 */
1213 .hub_status_data = ehci_hub_status_data,
1214 .hub_control = ehci_hub_control,
1215 .hub_suspend = ehci_hub_suspend,
1216 .hub_resume = ehci_hub_resume,
1217};
1218 880
1219/*-------------------------------------------------------------------------*/ 881/*-------------------------------------------------------------------------*/
1220 882
1221/* EHCI 1.0 doesn't require PCI */
1222
1223#ifdef CONFIG_PCI
1224
1225/* PCI driver selection metadata; PCI hotplugging uses this */
1226static const struct pci_device_id pci_ids [] = { {
1227 /* handle any USB 2.0 EHCI controller */
1228 PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0),
1229 .driver_data = (unsigned long) &ehci_driver,
1230 },
1231 { /* end: all zeroes */ }
1232};
1233MODULE_DEVICE_TABLE (pci, pci_ids);
1234
1235/* pci driver glue; this is a "new style" PCI driver module */
1236static struct pci_driver ehci_pci_driver = {
1237 .name = (char *) hcd_name,
1238 .id_table = pci_ids,
1239
1240 .probe = usb_hcd_pci_probe,
1241 .remove = usb_hcd_pci_remove,
1242
1243#ifdef CONFIG_PM
1244 .suspend = usb_hcd_pci_suspend,
1245 .resume = usb_hcd_pci_resume,
1246#endif
1247};
1248
1249#endif /* PCI */
1250
1251
1252#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC 883#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
1253 884
1254MODULE_DESCRIPTION (DRIVER_INFO); 885MODULE_DESCRIPTION (DRIVER_INFO);
1255MODULE_AUTHOR (DRIVER_AUTHOR); 886MODULE_AUTHOR (DRIVER_AUTHOR);
1256MODULE_LICENSE ("GPL"); 887MODULE_LICENSE ("GPL");
1257 888
1258static int __init init (void) 889#ifdef CONFIG_PCI
1259{ 890#include "ehci-pci.c"
1260 if (usb_disabled()) 891#endif
1261 return -ENODEV;
1262
1263 pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
1264 hcd_name,
1265 sizeof (struct ehci_qh), sizeof (struct ehci_qtd),
1266 sizeof (struct ehci_itd), sizeof (struct ehci_sitd));
1267
1268 return pci_register_driver (&ehci_pci_driver);
1269}
1270module_init (init);
1271 892
1272static void __exit cleanup (void) 893#if !defined(CONFIG_PCI)
1273{ 894#error "missing bus glue for ehci-hcd"
1274 pci_unregister_driver (&ehci_pci_driver); 895#endif
1275}
1276module_exit (cleanup);
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 18d3f2270316..88cb4ada686e 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -30,7 +30,7 @@
30 30
31#ifdef CONFIG_PM 31#ifdef CONFIG_PM
32 32
33static int ehci_hub_suspend (struct usb_hcd *hcd) 33static int ehci_bus_suspend (struct usb_hcd *hcd)
34{ 34{
35 struct ehci_hcd *ehci = hcd_to_ehci (hcd); 35 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
36 int port; 36 int port;
@@ -83,7 +83,7 @@ static int ehci_hub_suspend (struct usb_hcd *hcd)
83 83
84 84
85/* caller has locked the root hub, and should reset/reinit on error */ 85/* caller has locked the root hub, and should reset/reinit on error */
86static int ehci_hub_resume (struct usb_hcd *hcd) 86static int ehci_bus_resume (struct usb_hcd *hcd)
87{ 87{
88 struct ehci_hcd *ehci = hcd_to_ehci (hcd); 88 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
89 u32 temp; 89 u32 temp;
@@ -159,8 +159,8 @@ static int ehci_hub_resume (struct usb_hcd *hcd)
159 159
160#else 160#else
161 161
162#define ehci_hub_suspend NULL 162#define ehci_bus_suspend NULL
163#define ehci_hub_resume NULL 163#define ehci_bus_resume NULL
164 164
165#endif /* CONFIG_PM */ 165#endif /* CONFIG_PM */
166 166
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
new file mode 100644
index 000000000000..145008853966
--- /dev/null
+++ b/drivers/usb/host/ehci-pci.c
@@ -0,0 +1,415 @@
1/*
2 * EHCI HCD (Host Controller Driver) PCI Bus Glue.
3 *
4 * Copyright (c) 2000-2004 by David Brownell
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
13 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
14 * for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software Foundation,
18 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 */
20
21#ifndef CONFIG_PCI
22#error "This file is PCI bus glue. CONFIG_PCI must be defined."
23#endif
24
25/*-------------------------------------------------------------------------*/
26
27/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/...
28 * off the controller (maybe it can boot from highspeed USB disks).
29 */
30static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap)
31{
32 struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
33
34 /* always say Linux will own the hardware */
35 pci_write_config_byte(pdev, where + 3, 1);
36
37 /* maybe wait a while for BIOS to respond */
38 if (cap & (1 << 16)) {
39 int msec = 5000;
40
41 do {
42 msleep(10);
43 msec -= 10;
44 pci_read_config_dword(pdev, where, &cap);
45 } while ((cap & (1 << 16)) && msec);
46 if (cap & (1 << 16)) {
47 ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n",
48 where, cap);
49 // some BIOS versions seem buggy...
50 // return 1;
51 ehci_warn (ehci, "continuing after BIOS bug...\n");
52 /* disable all SMIs, and clear "BIOS owns" flag */
53 pci_write_config_dword(pdev, where + 4, 0);
54 pci_write_config_byte(pdev, where + 2, 0);
55 } else
56 ehci_dbg(ehci, "BIOS handoff succeeded\n");
57 }
58 return 0;
59}
60
61/* called by khubd or root hub init threads */
62static int ehci_pci_reset (struct usb_hcd *hcd)
63{
64 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
65 u32 temp;
66 unsigned count = 256/4;
67
68 spin_lock_init (&ehci->lock);
69
70 ehci->caps = hcd->regs;
71 ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase));
72 dbg_hcs_params (ehci, "reset");
73 dbg_hcc_params (ehci, "reset");
74
75 /* cache this readonly data; minimize chip reads */
76 ehci->hcs_params = readl (&ehci->caps->hcs_params);
77
78 if (hcd->self.controller->bus == &pci_bus_type) {
79 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
80
81 switch (pdev->vendor) {
82 case PCI_VENDOR_ID_TDI:
83 if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
84 ehci->is_tdi_rh_tt = 1;
85 tdi_reset (ehci);
86 }
87 break;
88 case PCI_VENDOR_ID_AMD:
89 /* AMD8111 EHCI doesn't work, according to AMD errata */
90 if (pdev->device == 0x7463) {
91 ehci_info (ehci, "ignoring AMD8111 (errata)\n");
92 return -EIO;
93 }
94 break;
95 case PCI_VENDOR_ID_NVIDIA:
96 /* NVidia reports that certain chips don't handle
97 * QH, ITD, or SITD addresses above 2GB. (But TD,
98 * data buffer, and periodic schedule are normal.)
99 */
100 switch (pdev->device) {
101 case 0x003c: /* MCP04 */
102 case 0x005b: /* CK804 */
103 case 0x00d8: /* CK8 */
104 case 0x00e8: /* CK8S */
105 if (pci_set_consistent_dma_mask(pdev,
106 DMA_31BIT_MASK) < 0)
107 ehci_warn (ehci, "can't enable NVidia "
108 "workaround for >2GB RAM\n");
109 break;
110 }
111 break;
112 }
113
114 /* optional debug port, normally in the first BAR */
115 temp = pci_find_capability (pdev, 0x0a);
116 if (temp) {
117 pci_read_config_dword(pdev, temp, &temp);
118 temp >>= 16;
119 if ((temp & (3 << 13)) == (1 << 13)) {
120 temp &= 0x1fff;
121 ehci->debug = hcd->regs + temp;
122 temp = readl (&ehci->debug->control);
123 ehci_info (ehci, "debug port %d%s\n",
124 HCS_DEBUG_PORT(ehci->hcs_params),
125 (temp & DBGP_ENABLED)
126 ? " IN USE"
127 : "");
128 if (!(temp & DBGP_ENABLED))
129 ehci->debug = NULL;
130 }
131 }
132
133 temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params));
134 } else
135 temp = 0;
136
137 /* EHCI 0.96 and later may have "extended capabilities" */
138 while (temp && count--) {
139 u32 cap;
140
141 pci_read_config_dword (to_pci_dev(hcd->self.controller),
142 temp, &cap);
143 ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp);
144 switch (cap & 0xff) {
145 case 1: /* BIOS/SMM/... handoff */
146 if (bios_handoff (ehci, temp, cap) != 0)
147 return -EOPNOTSUPP;
148 break;
149 case 0: /* illegal reserved capability */
150 ehci_warn (ehci, "illegal capability!\n");
151 cap = 0;
152 /* FALLTHROUGH */
153 default: /* unknown */
154 break;
155 }
156 temp = (cap >> 8) & 0xff;
157 }
158 if (!count) {
159 ehci_err (ehci, "bogus capabilities ... PCI problems!\n");
160 return -EIO;
161 }
162 if (ehci_is_TDI(ehci))
163 ehci_reset (ehci);
164
165 ehci_port_power (ehci, 0);
166
167 /* at least the Genesys GL880S needs fixup here */
168 temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
169 temp &= 0x0f;
170 if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
171 ehci_dbg (ehci, "bogus port configuration: "
172 "cc=%d x pcc=%d < ports=%d\n",
173 HCS_N_CC(ehci->hcs_params),
174 HCS_N_PCC(ehci->hcs_params),
175 HCS_N_PORTS(ehci->hcs_params));
176
177 if (hcd->self.controller->bus == &pci_bus_type) {
178 struct pci_dev *pdev;
179
180 pdev = to_pci_dev(hcd->self.controller);
181 switch (pdev->vendor) {
182 case 0x17a0: /* GENESYS */
183 /* GL880S: should be PORTS=2 */
184 temp |= (ehci->hcs_params & ~0xf);
185 ehci->hcs_params = temp;
186 break;
187 case PCI_VENDOR_ID_NVIDIA:
188 /* NF4: should be PCC=10 */
189 break;
190 }
191 }
192 }
193
194 /* force HC to halt state */
195 return ehci_halt (ehci);
196}
197
198static int ehci_pci_start (struct usb_hcd *hcd)
199{
200 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
201 int result = 0;
202
203 if (hcd->self.controller->bus == &pci_bus_type) {
204 struct pci_dev *pdev;
205 u16 port_wake;
206
207 pdev = to_pci_dev(hcd->self.controller);
208
209 /* Serial Bus Release Number is at PCI 0x60 offset */
210 pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
211
212 /* port wake capability, reported by boot firmware */
213 pci_read_config_word(pdev, 0x62, &port_wake);
214 hcd->can_wakeup = (port_wake & 1) != 0;
215
216 /* help hc dma work well with cachelines */
217 result = pci_set_mwi(pdev);
218 if (result)
219 ehci_dbg(ehci, "unable to enable MWI - not fatal.\n");
220 }
221
222 return ehci_run (hcd);
223}
224
225/* always called by thread; normally rmmod */
226
227static void ehci_pci_stop (struct usb_hcd *hcd)
228{
229 ehci_stop (hcd);
230}
231
232/*-------------------------------------------------------------------------*/
233
234#ifdef CONFIG_PM
235
236/* suspend/resume, section 4.3 */
237
238/* These routines rely on the bus (pci, platform, etc)
239 * to handle powerdown and wakeup, and currently also on
240 * transceivers that don't need any software attention to set up
241 * the right sort of wakeup.
242 */
243
244static int ehci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
245{
246 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
247
248 if (time_before (jiffies, ehci->next_statechange))
249 msleep (100);
250
251#ifdef CONFIG_USB_SUSPEND
252 (void) usb_suspend_device (hcd->self.root_hub);
253#else
254 usb_lock_device (hcd->self.root_hub);
255 (void) ehci_bus_suspend (hcd);
256 usb_unlock_device (hcd->self.root_hub);
257#endif
258
259 // save (PCI) FLADJ in case of Vaux power loss
260 // ... we'd only use it to handle clock skew
261
262 return 0;
263}
264
265static int ehci_pci_resume (struct usb_hcd *hcd)
266{
267 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
268 unsigned port;
269 struct usb_device *root = hcd->self.root_hub;
270 int retval = -EINVAL;
271
272 // maybe restore (PCI) FLADJ
273
274 if (time_before (jiffies, ehci->next_statechange))
275 msleep (100);
276
277 /* If any port is suspended (or owned by the companion),
278 * we know we can/must resume the HC (and mustn't reset it).
279 */
280 for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) {
281 u32 status;
282 port--;
283 status = readl (&ehci->regs->port_status [port]);
284 if (!(status & PORT_POWER))
285 continue;
286 if (status & (PORT_SUSPEND | PORT_OWNER)) {
287 down (&hcd->self.root_hub->serialize);
288 retval = ehci_bus_resume (hcd);
289 up (&hcd->self.root_hub->serialize);
290 break;
291 }
292 if (!root->children [port])
293 continue;
294 dbg_port (ehci, __FUNCTION__, port + 1, status);
295 usb_set_device_state (root->children[port],
296 USB_STATE_NOTATTACHED);
297 }
298
299 /* Else reset, to cope with power loss or flush-to-storage
300 * style "resume" having activated BIOS during reboot.
301 */
302 if (port == 0) {
303 (void) ehci_halt (ehci);
304 (void) ehci_reset (ehci);
305 (void) ehci_pci_reset (hcd);
306
307 /* emptying the schedule aborts any urbs */
308 spin_lock_irq (&ehci->lock);
309 if (ehci->reclaim)
310 ehci->reclaim_ready = 1;
311 ehci_work (ehci, NULL);
312 spin_unlock_irq (&ehci->lock);
313
314 /* restart; khubd will disconnect devices */
315 retval = ehci_run (hcd);
316
317 /* here we "know" root ports should always stay powered;
318 * but some controllers may lose all power.
319 */
320 ehci_port_power (ehci, 1);
321 }
322
323 return retval;
324}
325#endif
326
327static const struct hc_driver ehci_pci_hc_driver = {
328 .description = hcd_name,
329 .product_desc = "EHCI Host Controller",
330 .hcd_priv_size = sizeof(struct ehci_hcd),
331
332 /*
333 * generic hardware linkage
334 */
335 .irq = ehci_irq,
336 .flags = HCD_MEMORY | HCD_USB2,
337
338 /*
339 * basic lifecycle operations
340 */
341 .reset = ehci_pci_reset,
342 .start = ehci_pci_start,
343#ifdef CONFIG_PM
344 .suspend = ehci_pci_suspend,
345 .resume = ehci_pci_resume,
346#endif
347 .stop = ehci_pci_stop,
348
349 /*
350 * managing i/o requests and associated device resources
351 */
352 .urb_enqueue = ehci_urb_enqueue,
353 .urb_dequeue = ehci_urb_dequeue,
354 .endpoint_disable = ehci_endpoint_disable,
355
356 /*
357 * scheduling support
358 */
359 .get_frame_number = ehci_get_frame,
360
361 /*
362 * root hub support
363 */
364 .hub_status_data = ehci_hub_status_data,
365 .hub_control = ehci_hub_control,
366 .bus_suspend = ehci_bus_suspend,
367 .bus_resume = ehci_bus_resume,
368};
369
370/*-------------------------------------------------------------------------*/
371
372/* PCI driver selection metadata; PCI hotplugging uses this */
373static const struct pci_device_id pci_ids [] = { {
374 /* handle any USB 2.0 EHCI controller */
375 PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0),
376 .driver_data = (unsigned long) &ehci_pci_hc_driver,
377 },
378 { /* end: all zeroes */ }
379};
380MODULE_DEVICE_TABLE (pci, pci_ids);
381
382/* pci driver glue; this is a "new style" PCI driver module */
383static struct pci_driver ehci_pci_driver = {
384 .name = (char *) hcd_name,
385 .id_table = pci_ids,
386 .owner = THIS_MODULE,
387
388 .probe = usb_hcd_pci_probe,
389 .remove = usb_hcd_pci_remove,
390
391#ifdef CONFIG_PM
392 .suspend = usb_hcd_pci_suspend,
393 .resume = usb_hcd_pci_resume,
394#endif
395};
396
397static int __init ehci_hcd_pci_init (void)
398{
399 if (usb_disabled())
400 return -ENODEV;
401
402 pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
403 hcd_name,
404 sizeof (struct ehci_qh), sizeof (struct ehci_qtd),
405 sizeof (struct ehci_itd), sizeof (struct ehci_sitd));
406
407 return pci_register_driver (&ehci_pci_driver);
408}
409module_init (ehci_hcd_pci_init);
410
411static void __exit ehci_hcd_pci_cleanup (void)
412{
413 pci_unregister_driver (&ehci_pci_driver);
414}
415module_exit (ehci_hcd_pci_cleanup);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index f34a0516d35f..18e257c2bdb5 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -97,6 +97,7 @@ struct ehci_hcd { /* one per controller */
97#else 97#else
98# define COUNT(x) do {} while (0) 98# define COUNT(x) do {} while (0)
99#endif 99#endif
100 u8 sbrn; /* packed release number */
100}; 101};
101 102
102/* convert between an HCD pointer and the corresponding EHCI_HCD */ 103/* convert between an HCD pointer and the corresponding EHCI_HCD */
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 642f35068ce2..ddb8fc591466 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -638,7 +638,7 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs)
638 + msecs_to_jiffies(20) + 1); 638 + msecs_to_jiffies(20) + 1);
639 if (intstat & HCINT_RD) { 639 if (intstat & HCINT_RD) {
640 DBG("---- remote wakeup\n"); 640 DBG("---- remote wakeup\n");
641 schedule_work(&isp116x->rh_resume); 641 usb_hcd_resume_root_hub(hcd);
642 ret = IRQ_HANDLED; 642 ret = IRQ_HANDLED;
643 } 643 }
644 irqstat &= ~HCuPINT_OPR; 644 irqstat &= ~HCuPINT_OPR;
@@ -1160,7 +1160,7 @@ static int isp116x_hub_control(struct usb_hcd *hcd,
1160 1160
1161#ifdef CONFIG_PM 1161#ifdef CONFIG_PM
1162 1162
1163static int isp116x_hub_suspend(struct usb_hcd *hcd) 1163static int isp116x_bus_suspend(struct usb_hcd *hcd)
1164{ 1164{
1165 struct isp116x *isp116x = hcd_to_isp116x(hcd); 1165 struct isp116x *isp116x = hcd_to_isp116x(hcd);
1166 unsigned long flags; 1166 unsigned long flags;
@@ -1200,7 +1200,7 @@ static int isp116x_hub_suspend(struct usb_hcd *hcd)
1200 return ret; 1200 return ret;
1201} 1201}
1202 1202
1203static int isp116x_hub_resume(struct usb_hcd *hcd) 1203static int isp116x_bus_resume(struct usb_hcd *hcd)
1204{ 1204{
1205 struct isp116x *isp116x = hcd_to_isp116x(hcd); 1205 struct isp116x *isp116x = hcd_to_isp116x(hcd);
1206 u32 val; 1206 u32 val;
@@ -1263,21 +1263,11 @@ static int isp116x_hub_resume(struct usb_hcd *hcd)
1263 return 0; 1263 return 0;
1264} 1264}
1265 1265
1266static void isp116x_rh_resume(void *_hcd)
1267{
1268 struct usb_hcd *hcd = _hcd;
1269
1270 usb_resume_device(hcd->self.root_hub);
1271}
1272 1266
1273#else 1267#else
1274 1268
1275#define isp116x_hub_suspend NULL 1269#define isp116x_bus_suspend NULL
1276#define isp116x_hub_resume NULL 1270#define isp116x_bus_resume NULL
1277
1278static void isp116x_rh_resume(void *_hcd)
1279{
1280}
1281 1271
1282#endif 1272#endif
1283 1273
@@ -1636,8 +1626,8 @@ static struct hc_driver isp116x_hc_driver = {
1636 1626
1637 .hub_status_data = isp116x_hub_status_data, 1627 .hub_status_data = isp116x_hub_status_data,
1638 .hub_control = isp116x_hub_control, 1628 .hub_control = isp116x_hub_control,
1639 .hub_suspend = isp116x_hub_suspend, 1629 .bus_suspend = isp116x_bus_suspend,
1640 .hub_resume = isp116x_hub_resume, 1630 .bus_resume = isp116x_bus_resume,
1641}; 1631};
1642 1632
1643/*----------------------------------------------------------------*/ 1633/*----------------------------------------------------------------*/
@@ -1732,7 +1722,6 @@ static int __init isp116x_probe(struct device *dev)
1732 isp116x->addr_reg = addr_reg; 1722 isp116x->addr_reg = addr_reg;
1733 spin_lock_init(&isp116x->lock); 1723 spin_lock_init(&isp116x->lock);
1734 INIT_LIST_HEAD(&isp116x->async); 1724 INIT_LIST_HEAD(&isp116x->async);
1735 INIT_WORK(&isp116x->rh_resume, isp116x_rh_resume, hcd);
1736 isp116x->board = dev->platform_data; 1725 isp116x->board = dev->platform_data;
1737 1726
1738 if (!isp116x->board) { 1727 if (!isp116x->board) {
@@ -1777,16 +1766,10 @@ static int __init isp116x_probe(struct device *dev)
1777static int isp116x_suspend(struct device *dev, pm_message_t state) 1766static int isp116x_suspend(struct device *dev, pm_message_t state)
1778{ 1767{
1779 int ret = 0; 1768 int ret = 0;
1780 struct usb_hcd *hcd = dev_get_drvdata(dev);
1781 1769
1782 VDBG("%s: state %x\n", __func__, state); 1770 VDBG("%s: state %x\n", __func__, state);
1783 1771
1784 ret = usb_suspend_device(hcd->self.root_hub, state); 1772 dev->power.power_state = state;
1785 if (!ret) {
1786 dev->power.power_state = state;
1787 INFO("%s suspended\n", hcd_name);
1788 } else
1789 ERR("%s suspend failed\n", hcd_name);
1790 1773
1791 return ret; 1774 return ret;
1792} 1775}
@@ -1797,15 +1780,11 @@ static int isp116x_suspend(struct device *dev, pm_message_t state)
1797static int isp116x_resume(struct device *dev) 1780static int isp116x_resume(struct device *dev)
1798{ 1781{
1799 int ret = 0; 1782 int ret = 0;
1800 struct usb_hcd *hcd = dev_get_drvdata(dev);
1801 1783
1802 VDBG("%s: state %x\n", __func__, dev->power.power_state); 1784 VDBG("%s: state %x\n", __func__, dev->power.power_state);
1803 1785
1804 ret = usb_resume_device(hcd->self.root_hub); 1786 dev->power.power_state = PMSG_ON;
1805 if (!ret) { 1787
1806 dev->power.power_state = PMSG_ON;
1807 VDBG("%s resumed\n", (char *)hcd_name);
1808 }
1809 return ret; 1788 return ret;
1810} 1789}
1811 1790
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
index 58873470dcf5..c6fec96785fe 100644
--- a/drivers/usb/host/isp116x.h
+++ b/drivers/usb/host/isp116x.h
@@ -253,7 +253,6 @@ static const int cc_to_error[16] = {
253 253
254struct isp116x { 254struct isp116x {
255 spinlock_t lock; 255 spinlock_t lock;
256 struct work_struct rh_resume;
257 256
258 void __iomem *addr_reg; 257 void __iomem *addr_reg;
259 void __iomem *data_reg; 258 void __iomem *data_reg;
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 3981bf15c8c7..a277e258eb6c 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -214,6 +214,11 @@ static const struct hc_driver ohci_au1xxx_hc_driver = {
214 */ 214 */
215 .hub_status_data = ohci_hub_status_data, 215 .hub_status_data = ohci_hub_status_data,
216 .hub_control = ohci_hub_control, 216 .hub_control = ohci_hub_control,
217#ifdef CONFIG_PM
218 .bus_suspend = ohci_bus_suspend,
219 .bus_resume = ohci_bus_resume,
220#endif
221 .start_port_reset = ohci_start_port_reset,
217}; 222};
218 223
219/*-------------------------------------------------------------------------*/ 224/*-------------------------------------------------------------------------*/
@@ -259,6 +264,7 @@ static int ohci_hcd_au1xxx_drv_resume(struct device *dev)
259 264
260static struct device_driver ohci_hcd_au1xxx_driver = { 265static struct device_driver ohci_hcd_au1xxx_driver = {
261 .name = "au1xxx-ohci", 266 .name = "au1xxx-ohci",
267 .owner = THIS_MODULE,
262 .bus = &platform_bus_type, 268 .bus = &platform_bus_type,
263 .probe = ohci_hcd_au1xxx_drv_probe, 269 .probe = ohci_hcd_au1xxx_drv_probe,
264 .remove = ohci_hcd_au1xxx_drv_remove, 270 .remove = ohci_hcd_au1xxx_drv_remove,
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 7924c74f958e..7bfffcbbd226 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -193,10 +193,6 @@ ohci_dump_status (struct ohci_hcd *controller, char **next, unsigned *size)
193 193
194 maybe_print_eds (controller, "donehead", 194 maybe_print_eds (controller, "donehead",
195 ohci_readl (controller, &regs->donehead), next, size); 195 ohci_readl (controller, &regs->donehead), next, size);
196
197 /* broken fminterval means traffic won't flow! */
198 ohci_dbg (controller, "fminterval %08x\n",
199 ohci_readl (controller, &regs->fminterval));
200} 196}
201 197
202#define dbg_port_sw(hc,num,value,next,size) \ 198#define dbg_port_sw(hc,num,value,next,size) \
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index f8da8c7af7c6..5c0c6c8a7a82 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -723,7 +723,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs)
723 ohci_vdbg (ohci, "resume detect\n"); 723 ohci_vdbg (ohci, "resume detect\n");
724 ohci_writel (ohci, OHCI_INTR_RD, &regs->intrstatus); 724 ohci_writel (ohci, OHCI_INTR_RD, &regs->intrstatus);
725 if (hcd->state != HC_STATE_QUIESCING) 725 if (hcd->state != HC_STATE_QUIESCING)
726 schedule_work(&ohci->rh_resume); 726 usb_hcd_resume_root_hub(hcd);
727 } 727 }
728 728
729 if (ints & OHCI_INTR_WDH) { 729 if (ints & OHCI_INTR_WDH) {
@@ -791,7 +791,7 @@ static void ohci_stop (struct usb_hcd *hcd)
791 791
792/* must not be called from interrupt context */ 792/* must not be called from interrupt context */
793 793
794#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM) 794#ifdef CONFIG_PM
795 795
796static int ohci_restart (struct ohci_hcd *ohci) 796static int ohci_restart (struct ohci_hcd *ohci)
797{ 797{
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index ce7b28da7a15..e01e77bc324b 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -36,7 +36,7 @@
36 36
37/*-------------------------------------------------------------------------*/ 37/*-------------------------------------------------------------------------*/
38 38
39#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM) 39#ifdef CONFIG_PM
40 40
41#define OHCI_SCHED_ENABLES \ 41#define OHCI_SCHED_ENABLES \
42 (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE) 42 (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
@@ -45,7 +45,7 @@ static void dl_done_list (struct ohci_hcd *, struct pt_regs *);
45static void finish_unlinks (struct ohci_hcd *, u16 , struct pt_regs *); 45static void finish_unlinks (struct ohci_hcd *, u16 , struct pt_regs *);
46static int ohci_restart (struct ohci_hcd *ohci); 46static int ohci_restart (struct ohci_hcd *ohci);
47 47
48static int ohci_hub_suspend (struct usb_hcd *hcd) 48static int ohci_bus_suspend (struct usb_hcd *hcd)
49{ 49{
50 struct ohci_hcd *ohci = hcd_to_ohci (hcd); 50 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
51 int status = 0; 51 int status = 0;
@@ -73,7 +73,6 @@ static int ohci_hub_suspend (struct usb_hcd *hcd)
73 ohci_dbg (ohci, "suspend root hub\n"); 73 ohci_dbg (ohci, "suspend root hub\n");
74 74
75 /* First stop any processing */ 75 /* First stop any processing */
76 hcd->state = HC_STATE_QUIESCING;
77 if (ohci->hc_control & OHCI_SCHED_ENABLES) { 76 if (ohci->hc_control & OHCI_SCHED_ENABLES) {
78 int limit; 77 int limit;
79 78
@@ -108,7 +107,9 @@ static int ohci_hub_suspend (struct usb_hcd *hcd)
108 else 107 else
109 ohci->hc_control &= ~OHCI_CTRL_RWE; 108 ohci->hc_control &= ~OHCI_CTRL_RWE;
110 109
111 /* Suspend hub */ 110 /* Suspend hub ... this is the "global (to this bus) suspend" mode,
111 * which doesn't imply ports will first be individually suspended.
112 */
112 ohci->hc_control &= ~OHCI_CTRL_HCFS; 113 ohci->hc_control &= ~OHCI_CTRL_HCFS;
113 ohci->hc_control |= OHCI_USB_SUSPEND; 114 ohci->hc_control |= OHCI_USB_SUSPEND;
114 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); 115 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
@@ -118,8 +119,9 @@ static int ohci_hub_suspend (struct usb_hcd *hcd)
118 ohci->next_statechange = jiffies + msecs_to_jiffies (5); 119 ohci->next_statechange = jiffies + msecs_to_jiffies (5);
119 120
120done: 121done:
122 /* external suspend vs self autosuspend ... same effect */
121 if (status == 0) 123 if (status == 0)
122 hcd->state = HC_STATE_SUSPENDED; 124 usb_hcd_suspend_root_hub(hcd);
123 spin_unlock_irqrestore (&ohci->lock, flags); 125 spin_unlock_irqrestore (&ohci->lock, flags);
124 return status; 126 return status;
125} 127}
@@ -133,7 +135,7 @@ static inline struct ed *find_head (struct ed *ed)
133} 135}
134 136
135/* caller has locked the root hub */ 137/* caller has locked the root hub */
136static int ohci_hub_resume (struct usb_hcd *hcd) 138static int ohci_bus_resume (struct usb_hcd *hcd)
137{ 139{
138 struct ohci_hcd *ohci = hcd_to_ohci (hcd); 140 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
139 u32 temp, enables; 141 u32 temp, enables;
@@ -146,7 +148,7 @@ static int ohci_hub_resume (struct usb_hcd *hcd)
146 ohci->hc_control = ohci_readl (ohci, &ohci->regs->control); 148 ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
147 149
148 if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) { 150 if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
149 /* this can happen after suspend-to-disk */ 151 /* this can happen after resuming a swsusp snapshot */
150 if (hcd->state == HC_STATE_RESUMING) { 152 if (hcd->state == HC_STATE_RESUMING) {
151 ohci_dbg (ohci, "BIOS/SMM active, control %03x\n", 153 ohci_dbg (ohci, "BIOS/SMM active, control %03x\n",
152 ohci->hc_control); 154 ohci->hc_control);
@@ -169,11 +171,12 @@ static int ohci_hub_resume (struct usb_hcd *hcd)
169 ohci_info (ohci, "wakeup\n"); 171 ohci_info (ohci, "wakeup\n");
170 break; 172 break;
171 case OHCI_USB_OPER: 173 case OHCI_USB_OPER:
172 ohci_dbg (ohci, "already resumed\n"); 174 /* this can happen after resuming a swsusp snapshot */
173 status = 0; 175 ohci_dbg (ohci, "snapshot resume? reinit\n");
176 status = -EBUSY;
174 break; 177 break;
175 default: /* RESET, we lost power */ 178 default: /* RESET, we lost power */
176 ohci_dbg (ohci, "root hub hardware reset\n"); 179 ohci_dbg (ohci, "lost power\n");
177 status = -EBUSY; 180 status = -EBUSY;
178 } 181 }
179 spin_unlock_irq (&ohci->lock); 182 spin_unlock_irq (&ohci->lock);
@@ -198,8 +201,7 @@ static int ohci_hub_resume (struct usb_hcd *hcd)
198 } 201 }
199 202
200 /* Some controllers (lucent erratum) need extra-long delays */ 203 /* Some controllers (lucent erratum) need extra-long delays */
201 hcd->state = HC_STATE_RESUMING; 204 msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
202 mdelay (20 /* usb 11.5.1.10 */ + 15);
203 205
204 temp = ohci_readl (ohci, &ohci->regs->control); 206 temp = ohci_readl (ohci, &ohci->regs->control);
205 temp &= OHCI_CTRL_HCFS; 207 temp &= OHCI_CTRL_HCFS;
@@ -273,28 +275,10 @@ static int ohci_hub_resume (struct usb_hcd *hcd)
273 (void) ohci_readl (ohci, &ohci->regs->control); 275 (void) ohci_readl (ohci, &ohci->regs->control);
274 } 276 }
275 277
276 hcd->state = HC_STATE_RUNNING;
277 return 0; 278 return 0;
278} 279}
279 280
280static void ohci_rh_resume (void *_hcd) 281#endif /* CONFIG_PM */
281{
282 struct usb_hcd *hcd = _hcd;
283
284 usb_lock_device (hcd->self.root_hub);
285 (void) ohci_hub_resume (hcd);
286 usb_unlock_device (hcd->self.root_hub);
287}
288
289#else
290
291static void ohci_rh_resume (void *_hcd)
292{
293 struct ohci_hcd *ohci = hcd_to_ohci (_hcd);
294 ohci_dbg(ohci, "rh_resume ??\n");
295}
296
297#endif /* CONFIG_USB_SUSPEND || CONFIG_PM */
298 282
299/*-------------------------------------------------------------------------*/ 283/*-------------------------------------------------------------------------*/
300 284
@@ -367,7 +351,6 @@ done:
367#ifdef CONFIG_PM 351#ifdef CONFIG_PM
368 /* save power by suspending idle root hubs; 352 /* save power by suspending idle root hubs;
369 * INTR_RD wakes us when there's work 353 * INTR_RD wakes us when there's work
370 * NOTE: if we can do this, we don't need a root hub timer!
371 */ 354 */
372 if (can_suspend 355 if (can_suspend
373 && !changed 356 && !changed
@@ -379,8 +362,7 @@ done:
379 && usb_trylock_device (hcd->self.root_hub) 362 && usb_trylock_device (hcd->self.root_hub)
380 ) { 363 ) {
381 ohci_vdbg (ohci, "autosuspend\n"); 364 ohci_vdbg (ohci, "autosuspend\n");
382 (void) ohci_hub_suspend (hcd); 365 (void) ohci_bus_suspend (hcd);
383 hcd->state = HC_STATE_RUNNING;
384 usb_unlock_device (hcd->self.root_hub); 366 usb_unlock_device (hcd->self.root_hub);
385 } 367 }
386#endif 368#endif
@@ -554,7 +536,7 @@ static int ohci_hub_control (
554 temp = RH_PS_POCI; 536 temp = RH_PS_POCI;
555 if ((ohci->hc_control & OHCI_CTRL_HCFS) 537 if ((ohci->hc_control & OHCI_CTRL_HCFS)
556 != OHCI_USB_OPER) 538 != OHCI_USB_OPER)
557 schedule_work (&ohci->rh_resume); 539 usb_hcd_resume_root_hub(hcd);
558 break; 540 break;
559 case USB_PORT_FEAT_C_SUSPEND: 541 case USB_PORT_FEAT_C_SUSPEND:
560 temp = RH_PS_PSSC; 542 temp = RH_PS_PSSC;
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 859aca7be753..238fa4ade615 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -193,6 +193,11 @@ static const struct hc_driver ohci_lh7a404_hc_driver = {
193 */ 193 */
194 .hub_status_data = ohci_hub_status_data, 194 .hub_status_data = ohci_hub_status_data,
195 .hub_control = ohci_hub_control, 195 .hub_control = ohci_hub_control,
196#ifdef CONFIG_PM
197 .bus_suspend = ohci_bus_suspend,
198 .bus_resume = ohci_bus_resume,
199#endif
200 .start_port_reset = ohci_start_port_reset,
196}; 201};
197 202
198/*-------------------------------------------------------------------------*/ 203/*-------------------------------------------------------------------------*/
@@ -239,6 +244,7 @@ static int ohci_hcd_lh7a404_drv_resume(struct device *dev)
239 244
240static struct device_driver ohci_hcd_lh7a404_driver = { 245static struct device_driver ohci_hcd_lh7a404_driver = {
241 .name = "lh7a404-ohci", 246 .name = "lh7a404-ohci",
247 .owner = THIS_MODULE,
242 .bus = &platform_bus_type, 248 .bus = &platform_bus_type,
243 .probe = ohci_hcd_lh7a404_drv_probe, 249 .probe = ohci_hcd_lh7a404_drv_probe,
244 .remove = ohci_hcd_lh7a404_drv_remove, 250 .remove = ohci_hcd_lh7a404_drv_remove,
diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c
index 9fb83dfb1eb4..bfbe328a4788 100644
--- a/drivers/usb/host/ohci-mem.c
+++ b/drivers/usb/host/ohci-mem.c
@@ -28,7 +28,6 @@ static void ohci_hcd_init (struct ohci_hcd *ohci)
28 ohci->next_statechange = jiffies; 28 ohci->next_statechange = jiffies;
29 spin_lock_init (&ohci->lock); 29 spin_lock_init (&ohci->lock);
30 INIT_LIST_HEAD (&ohci->pending); 30 INIT_LIST_HEAD (&ohci->pending);
31 INIT_WORK (&ohci->rh_resume, ohci_rh_resume, ohci_to_hcd(ohci));
32 ohci->reboot_notifier.notifier_call = ohci_reboot; 31 ohci->reboot_notifier.notifier_call = ohci_reboot;
33} 32}
34 33
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index a574216625a0..45efeed1fcc3 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -420,9 +420,9 @@ static const struct hc_driver ohci_omap_hc_driver = {
420 */ 420 */
421 .hub_status_data = ohci_hub_status_data, 421 .hub_status_data = ohci_hub_status_data,
422 .hub_control = ohci_hub_control, 422 .hub_control = ohci_hub_control,
423#ifdef CONFIG_USB_SUSPEND 423#ifdef CONFIG_PM
424 .hub_suspend = ohci_hub_suspend, 424 .bus_suspend = ohci_bus_suspend,
425 .hub_resume = ohci_hub_resume, 425 .bus_resume = ohci_bus_resume,
426#endif 426#endif
427 .start_port_reset = ohci_start_port_reset, 427 .start_port_reset = ohci_start_port_reset,
428}; 428};
@@ -458,41 +458,29 @@ static int ohci_hcd_omap_drv_remove(struct device *dev)
458static int ohci_omap_suspend(struct device *dev, pm_message_t message) 458static int ohci_omap_suspend(struct device *dev, pm_message_t message)
459{ 459{
460 struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev)); 460 struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev));
461 int status = -EINVAL; 461
462 462 if (time_before(jiffies, ohci->next_statechange))
463 down(&ohci_to_hcd(ohci)->self.root_hub->serialize); 463 msleep(5);
464 status = ohci_hub_suspend(ohci_to_hcd(ohci)); 464 ohci->next_statechange = jiffies;
465 if (status == 0) { 465
466 omap_ohci_clock_power(0); 466 omap_ohci_clock_power(0);
467 ohci_to_hcd(ohci)->self.root_hub->state = 467 ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
468 USB_STATE_SUSPENDED; 468 dev->power.power_state = PMSG_SUSPEND;
469 ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED; 469 return 0;
470 dev->power.power_state = PMSG_SUSPEND;
471 }
472 up(&ohci_to_hcd(ohci)->self.root_hub->serialize);
473 return status;
474} 470}
475 471
476static int ohci_omap_resume(struct device *dev) 472static int ohci_omap_resume(struct device *dev)
477{ 473{
478 struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev)); 474 struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev));
479 int status = 0;
480 475
481 if (time_before(jiffies, ohci->next_statechange)) 476 if (time_before(jiffies, ohci->next_statechange))
482 msleep(5); 477 msleep(5);
483 ohci->next_statechange = jiffies; 478 ohci->next_statechange = jiffies;
479
484 omap_ohci_clock_power(1); 480 omap_ohci_clock_power(1);
485#ifdef CONFIG_USB_SUSPEND 481 dev->power.power_state = PMSG_ON;
486 /* get extra cleanup even if remote wakeup isn't in use */ 482 usb_hcd_resume_root_hub(dev_get_drvdata(dev));
487 status = usb_resume_device(ohci_to_hcd(ohci)->self.root_hub); 483 return 0;
488#else
489 down(&ohci_to_hcd(ohci)->self.root_hub->serialize);
490 status = ohci_hub_resume(ohci_to_hcd(ohci));
491 up(&ohci_to_hcd(ohci)->self.root_hub->serialize);
492#endif
493 if (status == 0)
494 dev->power.power_state = PMSG_ON;
495 return status;
496} 484}
497 485
498#endif 486#endif
@@ -504,6 +492,7 @@ static int ohci_omap_resume(struct device *dev)
504 */ 492 */
505static struct device_driver ohci_hcd_omap_driver = { 493static struct device_driver ohci_hcd_omap_driver = {
506 .name = "ohci", 494 .name = "ohci",
495 .owner = THIS_MODULE,
507 .bus = &platform_bus_type, 496 .bus = &platform_bus_type,
508 .probe = ohci_hcd_omap_drv_probe, 497 .probe = ohci_hcd_omap_drv_probe,
509 .remove = ohci_hcd_omap_drv_remove, 498 .remove = ohci_hcd_omap_drv_remove,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index eede6be098d2..bf1d5ab4aa3a 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -112,23 +112,13 @@ ohci_pci_start (struct usb_hcd *hcd)
112 112
113static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) 113static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
114{ 114{
115 struct ohci_hcd *ohci = hcd_to_ohci (hcd); 115 /* root hub was already suspended */
116
117 /* suspend root hub, hoping it keeps power during suspend */
118 if (time_before (jiffies, ohci->next_statechange))
119 msleep (100);
120
121#ifdef CONFIG_USB_SUSPEND
122 (void) usb_suspend_device (hcd->self.root_hub, message);
123#else
124 usb_lock_device (hcd->self.root_hub);
125 (void) ohci_hub_suspend (hcd);
126 usb_unlock_device (hcd->self.root_hub);
127#endif
128 116
129 /* let things settle down a bit */ 117 /* FIXME these PMAC things get called in the wrong places. ASIC
130 msleep (100); 118 * clocks should be turned off AFTER entering D3, and on BEFORE
131 119 * trying to enter D0. Evidently the PCI layer doesn't currently
120 * provide the right sort of platform hooks for this ...
121 */
132#ifdef CONFIG_PPC_PMAC 122#ifdef CONFIG_PPC_PMAC
133 if (_machine == _MACH_Pmac) { 123 if (_machine == _MACH_Pmac) {
134 struct device_node *of_node; 124 struct device_node *of_node;
@@ -145,9 +135,6 @@ static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
145 135
146static int ohci_pci_resume (struct usb_hcd *hcd) 136static int ohci_pci_resume (struct usb_hcd *hcd)
147{ 137{
148 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
149 int retval = 0;
150
151#ifdef CONFIG_PPC_PMAC 138#ifdef CONFIG_PPC_PMAC
152 if (_machine == _MACH_Pmac) { 139 if (_machine == _MACH_Pmac) {
153 struct device_node *of_node; 140 struct device_node *of_node;
@@ -159,19 +146,8 @@ static int ohci_pci_resume (struct usb_hcd *hcd)
159 } 146 }
160#endif /* CONFIG_PPC_PMAC */ 147#endif /* CONFIG_PPC_PMAC */
161 148
162 /* resume root hub */ 149 usb_hcd_resume_root_hub(hcd);
163 if (time_before (jiffies, ohci->next_statechange)) 150 return 0;
164 msleep (100);
165#ifdef CONFIG_USB_SUSPEND
166 /* get extra cleanup even if remote wakeup isn't in use */
167 retval = usb_resume_device (hcd->self.root_hub);
168#else
169 usb_lock_device (hcd->self.root_hub);
170 retval = ohci_hub_resume (hcd);
171 usb_unlock_device (hcd->self.root_hub);
172#endif
173
174 return retval;
175} 151}
176 152
177#endif /* CONFIG_PM */ 153#endif /* CONFIG_PM */
@@ -218,9 +194,9 @@ static const struct hc_driver ohci_pci_hc_driver = {
218 */ 194 */
219 .hub_status_data = ohci_hub_status_data, 195 .hub_status_data = ohci_hub_status_data,
220 .hub_control = ohci_hub_control, 196 .hub_control = ohci_hub_control,
221#ifdef CONFIG_USB_SUSPEND 197#ifdef CONFIG_PM
222 .hub_suspend = ohci_hub_suspend, 198 .bus_suspend = ohci_bus_suspend,
223 .hub_resume = ohci_hub_resume, 199 .bus_resume = ohci_bus_resume,
224#endif 200#endif
225 .start_port_reset = ohci_start_port_reset, 201 .start_port_reset = ohci_start_port_reset,
226}; 202};
@@ -240,6 +216,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids);
240static struct pci_driver ohci_pci_driver = { 216static struct pci_driver ohci_pci_driver = {
241 .name = (char *) hcd_name, 217 .name = (char *) hcd_name,
242 .id_table = pci_ids, 218 .id_table = pci_ids,
219 .owner = THIS_MODULE,
243 220
244 .probe = usb_hcd_pci_probe, 221 .probe = usb_hcd_pci_probe,
245 .remove = usb_hcd_pci_remove, 222 .remove = usb_hcd_pci_remove,
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index 251533363028..4832e57ae579 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -163,9 +163,9 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = {
163 */ 163 */
164 .hub_status_data = ohci_hub_status_data, 164 .hub_status_data = ohci_hub_status_data,
165 .hub_control = ohci_hub_control, 165 .hub_control = ohci_hub_control,
166#ifdef CONFIG_USB_SUSPEND 166#ifdef CONFIG_PM
167 .hub_suspend = ohci_hub_suspend, 167 .bus_suspend = ohci_bus_suspend,
168 .hub_resume = ohci_hub_resume, 168 .bus_resume = ohci_bus_resume,
169#endif 169#endif
170 .start_port_reset = ohci_start_port_reset, 170 .start_port_reset = ohci_start_port_reset,
171}; 171};
@@ -193,10 +193,11 @@ static int ohci_hcd_ppc_soc_drv_remove(struct device *dev)
193 193
194static struct device_driver ohci_hcd_ppc_soc_driver = { 194static struct device_driver ohci_hcd_ppc_soc_driver = {
195 .name = "ppc-soc-ohci", 195 .name = "ppc-soc-ohci",
196 .owner = THIS_MODULE,
196 .bus = &platform_bus_type, 197 .bus = &platform_bus_type,
197 .probe = ohci_hcd_ppc_soc_drv_probe, 198 .probe = ohci_hcd_ppc_soc_drv_probe,
198 .remove = ohci_hcd_ppc_soc_drv_remove, 199 .remove = ohci_hcd_ppc_soc_drv_remove,
199#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM) 200#ifdef CONFIG_PM
200 /*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/ 201 /*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/
201 /*.resume = ohci_hcd_ppc_soc_drv_resume,*/ 202 /*.resume = ohci_hcd_ppc_soc_drv_resume,*/
202#endif 203#endif
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index f042261ecb8e..d287dcccd415 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -278,10 +278,11 @@ static const struct hc_driver ohci_pxa27x_hc_driver = {
278 */ 278 */
279 .hub_status_data = ohci_hub_status_data, 279 .hub_status_data = ohci_hub_status_data,
280 .hub_control = ohci_hub_control, 280 .hub_control = ohci_hub_control,
281#ifdef CONFIG_USB_SUSPEND 281#ifdef CONFIG_PM
282 .hub_suspend = ohci_hub_suspend, 282 .bus_suspend = ohci_bus_suspend,
283 .hub_resume = ohci_hub_resume, 283 .bus_resume = ohci_bus_resume,
284#endif 284#endif
285 .start_port_reset = ohci_start_port_reset,
285}; 286};
286 287
287/*-------------------------------------------------------------------------*/ 288/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index da7d5478f74d..fab420a2ce71 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -448,11 +448,11 @@ static const struct hc_driver ohci_s3c2410_hc_driver = {
448 */ 448 */
449 .hub_status_data = ohci_s3c2410_hub_status_data, 449 .hub_status_data = ohci_s3c2410_hub_status_data,
450 .hub_control = ohci_s3c2410_hub_control, 450 .hub_control = ohci_s3c2410_hub_control,
451 451#ifdef CONFIG_PM
452#if defined(CONFIG_USB_SUSPEND) && 0 452 .bus_suspend = ohci_bus_suspend,
453 .hub_suspend = ohci_hub_suspend, 453 .bus_resume = ohci_bus_resume,
454 .hub_resume = ohci_hub_resume,
455#endif 454#endif
455 .start_port_reset = ohci_start_port_reset,
456}; 456};
457 457
458/* device driver */ 458/* device driver */
@@ -474,6 +474,7 @@ static int ohci_hcd_s3c2410_drv_remove(struct device *dev)
474 474
475static struct device_driver ohci_hcd_s3c2410_driver = { 475static struct device_driver ohci_hcd_s3c2410_driver = {
476 .name = "s3c2410-ohci", 476 .name = "s3c2410-ohci",
477 .owner = THIS_MODULE,
477 .bus = &platform_bus_type, 478 .bus = &platform_bus_type,
478 .probe = ohci_hcd_s3c2410_drv_probe, 479 .probe = ohci_hcd_s3c2410_drv_probe,
479 .remove = ohci_hcd_s3c2410_drv_remove, 480 .remove = ohci_hcd_s3c2410_drv_remove,
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 814d2be4ee7b..fb3221ebbb29 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -235,10 +235,11 @@ static const struct hc_driver ohci_sa1111_hc_driver = {
235 */ 235 */
236 .hub_status_data = ohci_hub_status_data, 236 .hub_status_data = ohci_hub_status_data,
237 .hub_control = ohci_hub_control, 237 .hub_control = ohci_hub_control,
238#ifdef CONFIG_USB_SUSPEND 238#ifdef CONFIG_PM
239 .hub_suspend = ohci_hub_suspend, 239 .bus_suspend = ohci_bus_suspend,
240 .hub_resume = ohci_hub_resume, 240 .bus_resume = ohci_bus_resume,
241#endif 241#endif
242 .start_port_reset = ohci_start_port_reset,
242}; 243};
243 244
244/*-------------------------------------------------------------------------*/ 245/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 8a9b9d9209e9..caacf14371f5 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -389,7 +389,6 @@ struct ohci_hcd {
389 unsigned long next_statechange; /* suspend/resume */ 389 unsigned long next_statechange; /* suspend/resume */
390 u32 fminterval; /* saved register */ 390 u32 fminterval; /* saved register */
391 391
392 struct work_struct rh_resume;
393 struct notifier_block reboot_notifier; 392 struct notifier_block reboot_notifier;
394 393
395 unsigned long flags; /* for HC bugs */ 394 unsigned long flags; /* for HC bugs */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
new file mode 100644
index 000000000000..b7fd3f644e1e
--- /dev/null
+++ b/drivers/usb/host/pci-quirks.c
@@ -0,0 +1,296 @@
1/*
2 * This file contains code to reset and initialize USB host controllers.
3 * Some of it includes work-arounds for PCI hardware and BIOS quirks.
4 * It may need to run early during booting -- before USB would normally
5 * initialize -- to ensure that Linux doesn't use any legacy modes.
6 *
7 * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
8 * (and others)
9 */
10
11#include <linux/config.h>
12#ifdef CONFIG_USB_DEBUG
13#define DEBUG
14#else
15#undef DEBUG
16#endif
17
18#include <linux/types.h>
19#include <linux/kernel.h>
20#include <linux/pci.h>
21#include <linux/init.h>
22#include <linux/delay.h>
23#include <linux/acpi.h>
24
25
26#define UHCI_USBLEGSUP 0xc0 /* legacy support */
27#define UHCI_USBCMD 0 /* command register */
28#define UHCI_USBINTR 4 /* interrupt register */
29#define UHCI_USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
30#define UHCI_USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
31#define UHCI_USBCMD_RUN 0x0001 /* RUN/STOP bit */
32#define UHCI_USBCMD_HCRESET 0x0002 /* Host Controller reset */
33#define UHCI_USBCMD_EGSM 0x0008 /* Global Suspend Mode */
34#define UHCI_USBCMD_CONFIGURE 0x0040 /* Config Flag */
35#define UHCI_USBINTR_RESUME 0x0002 /* Resume interrupt enable */
36
37#define OHCI_CONTROL 0x04
38#define OHCI_CMDSTATUS 0x08
39#define OHCI_INTRSTATUS 0x0c
40#define OHCI_INTRENABLE 0x10
41#define OHCI_INTRDISABLE 0x14
42#define OHCI_OCR (1 << 3) /* ownership change request */
43#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
44#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
45#define OHCI_INTR_OC (1 << 30) /* ownership change */
46
47#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
48#define EHCI_USBCMD 0 /* command register */
49#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
50#define EHCI_USBSTS 4 /* status register */
51#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
52#define EHCI_USBINTR 8 /* interrupt register */
53#define EHCI_USBLEGSUP 0 /* legacy support register */
54#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
55#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
56#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
57#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
58
59
60/*
61 * Make sure the controller is completely inactive, unable to
62 * generate interrupts or do DMA.
63 */
64void uhci_reset_hc(struct pci_dev *pdev, unsigned long base)
65{
66 /* Turn off PIRQ enable and SMI enable. (This also turns off the
67 * BIOS's USB Legacy Support.) Turn off all the R/WC bits too.
68 */
69 pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC);
70
71 /* Reset the HC - this will force us to get a
72 * new notification of any already connected
73 * ports due to the virtual disconnect that it
74 * implies.
75 */
76 outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD);
77 mb();
78 udelay(5);
79 if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET)
80 dev_warn(&pdev->dev, "HCRESET not completed yet!\n");
81
82 /* Just to be safe, disable interrupt requests and
83 * make sure the controller is stopped.
84 */
85 outw(0, base + UHCI_USBINTR);
86 outw(0, base + UHCI_USBCMD);
87}
88EXPORT_SYMBOL_GPL(uhci_reset_hc);
89
90/*
91 * Initialize a controller that was newly discovered or has just been
92 * resumed. In either case we can't be sure of its previous state.
93 *
94 * Returns: 1 if the controller was reset, 0 otherwise.
95 */
96int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
97{
98 u16 legsup;
99 unsigned int cmd, intr;
100
101 /*
102 * When restarting a suspended controller, we expect all the
103 * settings to be the same as we left them:
104 *
105 * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
106 * Controller is stopped and configured with EGSM set;
107 * No interrupts enabled except possibly Resume Detect.
108 *
109 * If any of these conditions are violated we do a complete reset.
110 */
111 pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup);
112 if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) {
113 dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n",
114 __FUNCTION__, legsup);
115 goto reset_needed;
116 }
117
118 cmd = inw(base + UHCI_USBCMD);
119 if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) ||
120 !(cmd & UHCI_USBCMD_EGSM)) {
121 dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n",
122 __FUNCTION__, cmd);
123 goto reset_needed;
124 }
125
126 intr = inw(base + UHCI_USBINTR);
127 if (intr & (~UHCI_USBINTR_RESUME)) {
128 dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n",
129 __FUNCTION__, intr);
130 goto reset_needed;
131 }
132 return 0;
133
134reset_needed:
135 dev_dbg(&pdev->dev, "Performing full reset\n");
136 uhci_reset_hc(pdev, base);
137 return 1;
138}
139EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
140
141static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
142{
143 unsigned long base = 0;
144 int i;
145
146 for (i = 0; i < PCI_ROM_RESOURCE; i++)
147 if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
148 base = pci_resource_start(pdev, i);
149 break;
150 }
151
152 if (base)
153 uhci_check_and_reset_hc(pdev, base);
154}
155
156static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
157{
158 void __iomem *base;
159 int wait_time;
160 u32 control;
161
162 base = ioremap_nocache(pci_resource_start(pdev, 0),
163 pci_resource_len(pdev, 0));
164 if (base == NULL) return;
165
166/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
167#ifndef __hppa__
168 control = readl(base + OHCI_CONTROL);
169 if (control & OHCI_CTRL_IR) {
170 wait_time = 500; /* arbitrary; 5 seconds */
171 writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
172 writel(OHCI_OCR, base + OHCI_CMDSTATUS);
173 while (wait_time > 0 &&
174 readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
175 wait_time -= 10;
176 msleep(10);
177 }
178 if (wait_time <= 0)
179 printk(KERN_WARNING "%s %s: early BIOS handoff "
180 "failed (BIOS bug ?)\n",
181 pdev->dev.bus_id, "OHCI");
182
183 /* reset controller, preserving RWC */
184 writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
185 }
186#endif
187
188 /*
189 * disable interrupts
190 */
191 writel(~(u32)0, base + OHCI_INTRDISABLE);
192 writel(~(u32)0, base + OHCI_INTRSTATUS);
193
194 iounmap(base);
195}
196
197static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
198{
199 int wait_time, delta;
200 void __iomem *base, *op_reg_base;
201 u32 hcc_params, val, temp;
202 u8 cap_length;
203
204 base = ioremap_nocache(pci_resource_start(pdev, 0),
205 pci_resource_len(pdev, 0));
206 if (base == NULL) return;
207
208 cap_length = readb(base);
209 op_reg_base = base + cap_length;
210 hcc_params = readl(base + EHCI_HCC_PARAMS);
211 hcc_params = (hcc_params >> 8) & 0xff;
212 if (hcc_params) {
213 pci_read_config_dword(pdev,
214 hcc_params + EHCI_USBLEGSUP,
215 &val);
216 if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
217 /*
218 * Ok, BIOS is in smm mode, try to hand off...
219 */
220 pci_read_config_dword(pdev,
221 hcc_params + EHCI_USBLEGCTLSTS,
222 &temp);
223 pci_write_config_dword(pdev,
224 hcc_params + EHCI_USBLEGCTLSTS,
225 temp | EHCI_USBLEGCTLSTS_SOOE);
226 val |= EHCI_USBLEGSUP_OS;
227 pci_write_config_dword(pdev,
228 hcc_params + EHCI_USBLEGSUP,
229 val);
230
231 wait_time = 500;
232 do {
233 msleep(10);
234 wait_time -= 10;
235 pci_read_config_dword(pdev,
236 hcc_params + EHCI_USBLEGSUP,
237 &val);
238 } while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
239 if (!wait_time) {
240 /*
241 * well, possibly buggy BIOS...
242 */
243 printk(KERN_WARNING "%s %s: early BIOS handoff "
244 "failed (BIOS bug ?)\n",
245 pdev->dev.bus_id, "EHCI");
246 pci_write_config_dword(pdev,
247 hcc_params + EHCI_USBLEGSUP,
248 EHCI_USBLEGSUP_OS);
249 pci_write_config_dword(pdev,
250 hcc_params + EHCI_USBLEGCTLSTS,
251 0);
252 }
253 }
254 }
255
256 /*
257 * halt EHCI & disable its interrupts in any case
258 */
259 val = readl(op_reg_base + EHCI_USBSTS);
260 if ((val & EHCI_USBSTS_HALTED) == 0) {
261 val = readl(op_reg_base + EHCI_USBCMD);
262 val &= ~EHCI_USBCMD_RUN;
263 writel(val, op_reg_base + EHCI_USBCMD);
264
265 wait_time = 2000;
266 delta = 100;
267 do {
268 writel(0x3f, op_reg_base + EHCI_USBSTS);
269 udelay(delta);
270 wait_time -= delta;
271 val = readl(op_reg_base + EHCI_USBSTS);
272 if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
273 break;
274 }
275 } while (wait_time > 0);
276 }
277 writel(0, op_reg_base + EHCI_USBINTR);
278 writel(0x3f, op_reg_base + EHCI_USBSTS);
279
280 iounmap(base);
281
282 return;
283}
284
285
286
287static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
288{
289 if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
290 quirk_usb_handoff_uhci(pdev);
291 else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
292 quirk_usb_handoff_ohci(pdev);
293 else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
294 quirk_usb_disable_ehci(pdev);
295}
296DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index b5e7a478bc01..40169d9cf2b1 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1363,7 +1363,7 @@ error:
1363#ifdef CONFIG_PM 1363#ifdef CONFIG_PM
1364 1364
1365static int 1365static int
1366sl811h_hub_suspend(struct usb_hcd *hcd) 1366sl811h_bus_suspend(struct usb_hcd *hcd)
1367{ 1367{
1368 // SOFs off 1368 // SOFs off
1369 DBG("%s\n", __FUNCTION__); 1369 DBG("%s\n", __FUNCTION__);
@@ -1371,7 +1371,7 @@ sl811h_hub_suspend(struct usb_hcd *hcd)
1371} 1371}
1372 1372
1373static int 1373static int
1374sl811h_hub_resume(struct usb_hcd *hcd) 1374sl811h_bus_resume(struct usb_hcd *hcd)
1375{ 1375{
1376 // SOFs on 1376 // SOFs on
1377 DBG("%s\n", __FUNCTION__); 1377 DBG("%s\n", __FUNCTION__);
@@ -1380,8 +1380,8 @@ sl811h_hub_resume(struct usb_hcd *hcd)
1380 1380
1381#else 1381#else
1382 1382
1383#define sl811h_hub_suspend NULL 1383#define sl811h_bus_suspend NULL
1384#define sl811h_hub_resume NULL 1384#define sl811h_bus_resume NULL
1385 1385
1386#endif 1386#endif
1387 1387
@@ -1623,8 +1623,8 @@ static struct hc_driver sl811h_hc_driver = {
1623 */ 1623 */
1624 .hub_status_data = sl811h_hub_status_data, 1624 .hub_status_data = sl811h_hub_status_data,
1625 .hub_control = sl811h_hub_control, 1625 .hub_control = sl811h_hub_control,
1626 .hub_suspend = sl811h_hub_suspend, 1626 .bus_suspend = sl811h_bus_suspend,
1627 .hub_resume = sl811h_hub_resume, 1627 .bus_resume = sl811h_bus_resume,
1628}; 1628};
1629 1629
1630/*-------------------------------------------------------------------------*/ 1630/*-------------------------------------------------------------------------*/
@@ -1791,7 +1791,7 @@ sl811h_suspend(struct device *dev, pm_message_t state)
1791 int retval = 0; 1791 int retval = 0;
1792 1792
1793 if (state.event == PM_EVENT_FREEZE) 1793 if (state.event == PM_EVENT_FREEZE)
1794 retval = sl811h_hub_suspend(hcd); 1794 retval = sl811h_bus_suspend(hcd);
1795 else if (state.event == PM_EVENT_SUSPEND) 1795 else if (state.event == PM_EVENT_SUSPEND)
1796 port_power(sl811, 0); 1796 port_power(sl811, 0);
1797 if (retval == 0) 1797 if (retval == 0)
@@ -1816,7 +1816,7 @@ sl811h_resume(struct device *dev)
1816 } 1816 }
1817 1817
1818 dev->power.power_state = PMSG_ON; 1818 dev->power.power_state = PMSG_ON;
1819 return sl811h_hub_resume(hcd); 1819 return sl811h_bus_resume(hcd);
1820} 1820}
1821 1821
1822#else 1822#else
@@ -1831,6 +1831,7 @@ sl811h_resume(struct device *dev)
1831struct device_driver sl811h_driver = { 1831struct device_driver sl811h_driver = {
1832 .name = (char *) hcd_name, 1832 .name = (char *) hcd_name,
1833 .bus = &platform_bus_type, 1833 .bus = &platform_bus_type,
1834 .owner = THIS_MODULE,
1834 1835
1835 .probe = sl811h_probe, 1836 .probe = sl811h_probe,
1836 .remove = __devexit_p(sl811h_remove), 1837 .remove = __devexit_p(sl811h_remove),
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 4538a98b6f9d..151154df37fa 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -348,7 +348,6 @@ static int uhci_show_urbp(struct uhci_hcd *uhci, struct urb_priv *urbp, char *bu
348 348
349 if (urbp->urb->status != -EINPROGRESS) 349 if (urbp->urb->status != -EINPROGRESS)
350 out += sprintf(out, "Status=%d ", urbp->urb->status); 350 out += sprintf(out, "Status=%d ", urbp->urb->status);
351 //out += sprintf(out, "Inserttime=%lx ",urbp->inserttime);
352 //out += sprintf(out, "FSBRtime=%lx ",urbp->fsbrtime); 351 //out += sprintf(out, "FSBRtime=%lx ",urbp->fsbrtime);
353 352
354 count = 0; 353 count = 0;
@@ -446,11 +445,11 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
446 out += sprintf(out, "Frame List\n"); 445 out += sprintf(out, "Frame List\n");
447 for (i = 0; i < UHCI_NUMFRAMES; ++i) { 446 for (i = 0; i < UHCI_NUMFRAMES; ++i) {
448 int shown = 0; 447 int shown = 0;
449 td = uhci->fl->frame_cpu[i]; 448 td = uhci->frame_cpu[i];
450 if (!td) 449 if (!td)
451 continue; 450 continue;
452 451
453 if (td->dma_handle != (dma_addr_t)uhci->fl->frame[i]) { 452 if (td->dma_handle != (dma_addr_t)uhci->frame[i]) {
454 show_frame_num(); 453 show_frame_num();
455 out += sprintf(out, " frame list does not match td->dma_handle!\n"); 454 out += sprintf(out, " frame list does not match td->dma_handle!\n");
456 } 455 }
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 0c024898cbea..15e0a511069b 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -101,37 +101,16 @@ static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
101#include "uhci-q.c" 101#include "uhci-q.c"
102#include "uhci-hub.c" 102#include "uhci-hub.c"
103 103
104extern void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
105extern int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
106
104/* 107/*
105 * Make sure the controller is completely inactive, unable to 108 * Finish up a host controller reset and update the recorded state.
106 * generate interrupts or do DMA.
107 */ 109 */
108static void reset_hc(struct uhci_hcd *uhci) 110static void finish_reset(struct uhci_hcd *uhci)
109{ 111{
110 int port; 112 int port;
111 113
112 /* Turn off PIRQ enable and SMI enable. (This also turns off the
113 * BIOS's USB Legacy Support.) Turn off all the R/WC bits too.
114 */
115 pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
116 USBLEGSUP_RWC);
117
118 /* Reset the HC - this will force us to get a
119 * new notification of any already connected
120 * ports due to the virtual disconnect that it
121 * implies.
122 */
123 outw(USBCMD_HCRESET, uhci->io_addr + USBCMD);
124 mb();
125 udelay(5);
126 if (inw(uhci->io_addr + USBCMD) & USBCMD_HCRESET)
127 dev_warn(uhci_dev(uhci), "HCRESET not completed yet!\n");
128
129 /* Just to be safe, disable interrupt requests and
130 * make sure the controller is stopped.
131 */
132 outw(0, uhci->io_addr + USBINTR);
133 outw(0, uhci->io_addr + USBCMD);
134
135 /* HCRESET doesn't affect the Suspend, Reset, and Resume Detect 114 /* HCRESET doesn't affect the Suspend, Reset, and Resume Detect
136 * bits in the port status and control registers. 115 * bits in the port status and control registers.
137 * We have to clear them by hand. 116 * We have to clear them by hand.
@@ -153,7 +132,8 @@ static void reset_hc(struct uhci_hcd *uhci)
153 */ 132 */
154static void hc_died(struct uhci_hcd *uhci) 133static void hc_died(struct uhci_hcd *uhci)
155{ 134{
156 reset_hc(uhci); 135 uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr);
136 finish_reset(uhci);
157 uhci->hc_inaccessible = 1; 137 uhci->hc_inaccessible = 1;
158} 138}
159 139
@@ -163,44 +143,8 @@ static void hc_died(struct uhci_hcd *uhci)
163 */ 143 */
164static void check_and_reset_hc(struct uhci_hcd *uhci) 144static void check_and_reset_hc(struct uhci_hcd *uhci)
165{ 145{
166 u16 legsup; 146 if (uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr))
167 unsigned int cmd, intr; 147 finish_reset(uhci);
168
169 /*
170 * When restarting a suspended controller, we expect all the
171 * settings to be the same as we left them:
172 *
173 * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
174 * Controller is stopped and configured with EGSM set;
175 * No interrupts enabled except possibly Resume Detect.
176 *
177 * If any of these conditions are violated we do a complete reset.
178 */
179 pci_read_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, &legsup);
180 if (legsup & ~(USBLEGSUP_RO | USBLEGSUP_RWC)) {
181 dev_dbg(uhci_dev(uhci), "%s: legsup = 0x%04x\n",
182 __FUNCTION__, legsup);
183 goto reset_needed;
184 }
185
186 cmd = inw(uhci->io_addr + USBCMD);
187 if ((cmd & USBCMD_RS) || !(cmd & USBCMD_CF) || !(cmd & USBCMD_EGSM)) {
188 dev_dbg(uhci_dev(uhci), "%s: cmd = 0x%04x\n",
189 __FUNCTION__, cmd);
190 goto reset_needed;
191 }
192
193 intr = inw(uhci->io_addr + USBINTR);
194 if (intr & (~USBINTR_RESUME)) {
195 dev_dbg(uhci_dev(uhci), "%s: intr = 0x%04x\n",
196 __FUNCTION__, intr);
197 goto reset_needed;
198 }
199 return;
200
201reset_needed:
202 dev_dbg(uhci_dev(uhci), "Performing full reset\n");
203 reset_hc(uhci);
204} 148}
205 149
206/* 150/*
@@ -212,13 +156,13 @@ static void configure_hc(struct uhci_hcd *uhci)
212 outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF); 156 outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF);
213 157
214 /* Store the frame list base address */ 158 /* Store the frame list base address */
215 outl(uhci->fl->dma_handle, uhci->io_addr + USBFLBASEADD); 159 outl(uhci->frame_dma_handle, uhci->io_addr + USBFLBASEADD);
216 160
217 /* Set the current frame number */ 161 /* Set the current frame number */
218 outw(uhci->frame_number, uhci->io_addr + USBFRNUM); 162 outw(uhci->frame_number, uhci->io_addr + USBFRNUM);
219 163
220 /* Mark controller as running before we enable interrupts */ 164 /* Mark controller as not halted before we enable interrupts */
221 uhci_to_hcd(uhci)->state = HC_STATE_RUNNING; 165 uhci_to_hcd(uhci)->state = HC_STATE_SUSPENDED;
222 mb(); 166 mb();
223 167
224 /* Enable PIRQ */ 168 /* Enable PIRQ */
@@ -319,6 +263,7 @@ __acquires(uhci->lock)
319 263
320static void start_rh(struct uhci_hcd *uhci) 264static void start_rh(struct uhci_hcd *uhci)
321{ 265{
266 uhci_to_hcd(uhci)->state = HC_STATE_RUNNING;
322 uhci->is_stopped = 0; 267 uhci->is_stopped = 0;
323 smp_wmb(); 268 smp_wmb();
324 269
@@ -437,36 +382,21 @@ static void release_uhci(struct uhci_hcd *uhci)
437 int i; 382 int i;
438 383
439 for (i = 0; i < UHCI_NUM_SKELQH; i++) 384 for (i = 0; i < UHCI_NUM_SKELQH; i++)
440 if (uhci->skelqh[i]) { 385 uhci_free_qh(uhci, uhci->skelqh[i]);
441 uhci_free_qh(uhci, uhci->skelqh[i]);
442 uhci->skelqh[i] = NULL;
443 }
444 386
445 if (uhci->term_td) { 387 uhci_free_td(uhci, uhci->term_td);
446 uhci_free_td(uhci, uhci->term_td);
447 uhci->term_td = NULL;
448 }
449 388
450 if (uhci->qh_pool) { 389 dma_pool_destroy(uhci->qh_pool);
451 dma_pool_destroy(uhci->qh_pool);
452 uhci->qh_pool = NULL;
453 }
454 390
455 if (uhci->td_pool) { 391 dma_pool_destroy(uhci->td_pool);
456 dma_pool_destroy(uhci->td_pool);
457 uhci->td_pool = NULL;
458 }
459 392
460 if (uhci->fl) { 393 kfree(uhci->frame_cpu);
461 dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
462 uhci->fl, uhci->fl->dma_handle);
463 uhci->fl = NULL;
464 }
465 394
466 if (uhci->dentry) { 395 dma_free_coherent(uhci_dev(uhci),
467 debugfs_remove(uhci->dentry); 396 UHCI_NUMFRAMES * sizeof(*uhci->frame),
468 uhci->dentry = NULL; 397 uhci->frame, uhci->frame_dma_handle);
469 } 398
399 debugfs_remove(uhci->dentry);
470} 400}
471 401
472static int uhci_reset(struct usb_hcd *hcd) 402static int uhci_reset(struct usb_hcd *hcd)
@@ -545,7 +475,6 @@ static int uhci_start(struct usb_hcd *hcd)
545 struct uhci_hcd *uhci = hcd_to_uhci(hcd); 475 struct uhci_hcd *uhci = hcd_to_uhci(hcd);
546 int retval = -EBUSY; 476 int retval = -EBUSY;
547 int i; 477 int i;
548 dma_addr_t dma_handle;
549 struct dentry *dentry; 478 struct dentry *dentry;
550 479
551 hcd->uses_new_polling = 1; 480 hcd->uses_new_polling = 1;
@@ -579,17 +508,23 @@ static int uhci_start(struct usb_hcd *hcd)
579 508
580 init_waitqueue_head(&uhci->waitqh); 509 init_waitqueue_head(&uhci->waitqh);
581 510
582 uhci->fl = dma_alloc_coherent(uhci_dev(uhci), sizeof(*uhci->fl), 511 uhci->frame = dma_alloc_coherent(uhci_dev(uhci),
583 &dma_handle, 0); 512 UHCI_NUMFRAMES * sizeof(*uhci->frame),
584 if (!uhci->fl) { 513 &uhci->frame_dma_handle, 0);
514 if (!uhci->frame) {
585 dev_err(uhci_dev(uhci), "unable to allocate " 515 dev_err(uhci_dev(uhci), "unable to allocate "
586 "consistent memory for frame list\n"); 516 "consistent memory for frame list\n");
587 goto err_alloc_fl; 517 goto err_alloc_frame;
588 } 518 }
519 memset(uhci->frame, 0, UHCI_NUMFRAMES * sizeof(*uhci->frame));
589 520
590 memset((void *)uhci->fl, 0, sizeof(*uhci->fl)); 521 uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu),
591 522 GFP_KERNEL);
592 uhci->fl->dma_handle = dma_handle; 523 if (!uhci->frame_cpu) {
524 dev_err(uhci_dev(uhci), "unable to allocate "
525 "memory for frame pointers\n");
526 goto err_alloc_frame_cpu;
527 }
593 528
594 uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci), 529 uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci),
595 sizeof(struct uhci_td), 16, 0); 530 sizeof(struct uhci_td), 16, 0);
@@ -672,7 +607,7 @@ static int uhci_start(struct usb_hcd *hcd)
672 irq = 7; 607 irq = 7;
673 608
674 /* Only place we don't use the frame list routines */ 609 /* Only place we don't use the frame list routines */
675 uhci->fl->frame[i] = UHCI_PTR_QH | 610 uhci->frame[i] = UHCI_PTR_QH |
676 cpu_to_le32(uhci->skelqh[irq]->dma_handle); 611 cpu_to_le32(uhci->skelqh[irq]->dma_handle);
677 } 612 }
678 613
@@ -690,31 +625,29 @@ static int uhci_start(struct usb_hcd *hcd)
690 * error exits: 625 * error exits:
691 */ 626 */
692err_alloc_skelqh: 627err_alloc_skelqh:
693 for (i = 0; i < UHCI_NUM_SKELQH; i++) 628 for (i = 0; i < UHCI_NUM_SKELQH; i++) {
694 if (uhci->skelqh[i]) { 629 if (uhci->skelqh[i])
695 uhci_free_qh(uhci, uhci->skelqh[i]); 630 uhci_free_qh(uhci, uhci->skelqh[i]);
696 uhci->skelqh[i] = NULL; 631 }
697 }
698 632
699 uhci_free_td(uhci, uhci->term_td); 633 uhci_free_td(uhci, uhci->term_td);
700 uhci->term_td = NULL;
701 634
702err_alloc_term_td: 635err_alloc_term_td:
703 dma_pool_destroy(uhci->qh_pool); 636 dma_pool_destroy(uhci->qh_pool);
704 uhci->qh_pool = NULL;
705 637
706err_create_qh_pool: 638err_create_qh_pool:
707 dma_pool_destroy(uhci->td_pool); 639 dma_pool_destroy(uhci->td_pool);
708 uhci->td_pool = NULL;
709 640
710err_create_td_pool: 641err_create_td_pool:
711 dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl), 642 kfree(uhci->frame_cpu);
712 uhci->fl, uhci->fl->dma_handle); 643
713 uhci->fl = NULL; 644err_alloc_frame_cpu:
645 dma_free_coherent(uhci_dev(uhci),
646 UHCI_NUMFRAMES * sizeof(*uhci->frame),
647 uhci->frame, uhci->frame_dma_handle);
714 648
715err_alloc_fl: 649err_alloc_frame:
716 debugfs_remove(uhci->dentry); 650 debugfs_remove(uhci->dentry);
717 uhci->dentry = NULL;
718 651
719err_create_debug_entry: 652err_create_debug_entry:
720 return retval; 653 return retval;
@@ -726,7 +659,7 @@ static void uhci_stop(struct usb_hcd *hcd)
726 659
727 spin_lock_irq(&uhci->lock); 660 spin_lock_irq(&uhci->lock);
728 if (!uhci->hc_inaccessible) 661 if (!uhci->hc_inaccessible)
729 reset_hc(uhci); 662 hc_died(uhci);
730 uhci_scan_schedule(uhci, NULL); 663 uhci_scan_schedule(uhci, NULL);
731 spin_unlock_irq(&uhci->lock); 664 spin_unlock_irq(&uhci->lock);
732 665
@@ -774,14 +707,8 @@ static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message)
774 if (uhci->hc_inaccessible) /* Dead or already suspended */ 707 if (uhci->hc_inaccessible) /* Dead or already suspended */
775 goto done; 708 goto done;
776 709
777#ifndef CONFIG_USB_SUSPEND
778 /* Otherwise this would never happen */
779 suspend_rh(uhci, UHCI_RH_SUSPENDED);
780#endif
781
782 if (uhci->rh_state > UHCI_RH_SUSPENDED) { 710 if (uhci->rh_state > UHCI_RH_SUSPENDED) {
783 dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n"); 711 dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n");
784 hcd->state = HC_STATE_RUNNING;
785 rc = -EBUSY; 712 rc = -EBUSY;
786 goto done; 713 goto done;
787 }; 714 };
@@ -820,10 +747,6 @@ static int uhci_resume(struct usb_hcd *hcd)
820 check_and_reset_hc(uhci); 747 check_and_reset_hc(uhci);
821 configure_hc(uhci); 748 configure_hc(uhci);
822 749
823#ifndef CONFIG_USB_SUSPEND
824 /* Otherwise this would never happen */
825 wakeup_rh(uhci);
826#endif
827 if (uhci->rh_state == UHCI_RH_RESET) 750 if (uhci->rh_state == UHCI_RH_RESET)
828 suspend_rh(uhci, UHCI_RH_SUSPENDED); 751 suspend_rh(uhci, UHCI_RH_SUSPENDED);
829 752
@@ -881,8 +804,8 @@ static const struct hc_driver uhci_driver = {
881#ifdef CONFIG_PM 804#ifdef CONFIG_PM
882 .suspend = uhci_suspend, 805 .suspend = uhci_suspend,
883 .resume = uhci_resume, 806 .resume = uhci_resume,
884 .hub_suspend = uhci_rh_suspend, 807 .bus_suspend = uhci_rh_suspend,
885 .hub_resume = uhci_rh_resume, 808 .bus_resume = uhci_rh_resume,
886#endif 809#endif
887 .stop = uhci_stop, 810 .stop = uhci_stop,
888 811
@@ -908,6 +831,7 @@ MODULE_DEVICE_TABLE(pci, uhci_pci_ids);
908static struct pci_driver uhci_pci_driver = { 831static struct pci_driver uhci_pci_driver = {
909 .name = (char *)hcd_name, 832 .name = (char *)hcd_name,
910 .id_table = uhci_pci_ids, 833 .id_table = uhci_pci_ids,
834 .owner = THIS_MODULE,
911 835
912 .probe = usb_hcd_pci_probe, 836 .probe = usb_hcd_pci_probe,
913 .remove = usb_hcd_pci_remove, 837 .remove = usb_hcd_pci_remove,
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 282f40b75881..e576db57a926 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -7,6 +7,7 @@
7#define usb_packetid(pipe) (usb_pipein(pipe) ? USB_PID_IN : USB_PID_OUT) 7#define usb_packetid(pipe) (usb_pipein(pipe) ? USB_PID_IN : USB_PID_OUT)
8#define PIPE_DEVEP_MASK 0x0007ff00 8#define PIPE_DEVEP_MASK 0x0007ff00
9 9
10
10/* 11/*
11 * Universal Host Controller Interface data structures and defines 12 * Universal Host Controller Interface data structures and defines
12 */ 13 */
@@ -82,15 +83,10 @@
82#define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */ 83#define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */
83#define CAN_SCHEDULE_FRAMES 1000 /* how far future frames can be scheduled */ 84#define CAN_SCHEDULE_FRAMES 1000 /* how far future frames can be scheduled */
84 85
85struct uhci_frame_list {
86 __le32 frame[UHCI_NUMFRAMES];
87
88 void *frame_cpu[UHCI_NUMFRAMES];
89
90 dma_addr_t dma_handle;
91};
92 86
93struct urb_priv; 87/*
88 * Queue Headers
89 */
94 90
95/* 91/*
96 * One role of a QH is to hold a queue of TDs for some endpoint. Each QH is 92 * One role of a QH is to hold a queue of TDs for some endpoint. Each QH is
@@ -116,13 +112,13 @@ struct uhci_qh {
116 112
117 struct urb_priv *urbp; 113 struct urb_priv *urbp;
118 114
119 struct list_head list; /* P: uhci->frame_list_lock */ 115 struct list_head list;
120 struct list_head remove_list; /* P: uhci->remove_list_lock */ 116 struct list_head remove_list;
121} __attribute__((aligned(16))); 117} __attribute__((aligned(16)));
122 118
123/* 119/*
124 * We need a special accessor for the element pointer because it is 120 * We need a special accessor for the element pointer because it is
125 * subject to asynchronous updates by the controller 121 * subject to asynchronous updates by the controller.
126 */ 122 */
127static __le32 inline qh_element(struct uhci_qh *qh) { 123static __le32 inline qh_element(struct uhci_qh *qh) {
128 __le32 element = qh->element; 124 __le32 element = qh->element;
@@ -131,6 +127,11 @@ static __le32 inline qh_element(struct uhci_qh *qh) {
131 return element; 127 return element;
132} 128}
133 129
130
131/*
132 * Transfer Descriptors
133 */
134
134/* 135/*
135 * for TD <status>: 136 * for TD <status>:
136 */ 137 */
@@ -183,17 +184,10 @@ static __le32 inline qh_element(struct uhci_qh *qh) {
183 * 184 *
184 * That's silly, the hardware doesn't care. The hardware only cares that 185 * That's silly, the hardware doesn't care. The hardware only cares that
185 * the hardware words are 16-byte aligned, and we can have any amount of 186 * the hardware words are 16-byte aligned, and we can have any amount of
186 * sw space after the TD entry as far as I can tell. 187 * sw space after the TD entry.
187 *
188 * But let's just go with the documentation, at least for 32-bit machines.
189 * On 64-bit machines we probably want to take advantage of the fact that
190 * hw doesn't really care about the size of the sw-only area.
191 *
192 * Alas, not anymore, we have more than 4 words for software, woops.
193 * Everything still works tho, surprise! -jerdfelt
194 * 188 *
195 * td->link points to either another TD (not necessarily for the same urb or 189 * td->link points to either another TD (not necessarily for the same urb or
196 * even the same endpoint), or nothing (PTR_TERM), or a QH (for queued urbs) 190 * even the same endpoint), or nothing (PTR_TERM), or a QH (for queued urbs).
197 */ 191 */
198struct uhci_td { 192struct uhci_td {
199 /* Hardware fields */ 193 /* Hardware fields */
@@ -205,18 +199,16 @@ struct uhci_td {
205 /* Software fields */ 199 /* Software fields */
206 dma_addr_t dma_handle; 200 dma_addr_t dma_handle;
207 201
208 struct urb *urb; 202 struct list_head list;
209 203 struct list_head remove_list;
210 struct list_head list; /* P: urb->lock */
211 struct list_head remove_list; /* P: uhci->td_remove_list_lock */
212 204
213 int frame; /* for iso: what frame? */ 205 int frame; /* for iso: what frame? */
214 struct list_head fl_list; /* P: uhci->frame_list_lock */ 206 struct list_head fl_list;
215} __attribute__((aligned(16))); 207} __attribute__((aligned(16)));
216 208
217/* 209/*
218 * We need a special accessor for the control/status word because it is 210 * We need a special accessor for the control/status word because it is
219 * subject to asynchronous updates by the controller 211 * subject to asynchronous updates by the controller.
220 */ 212 */
221static u32 inline td_status(struct uhci_td *td) { 213static u32 inline td_status(struct uhci_td *td) {
222 __le32 status = td->status; 214 __le32 status = td->status;
@@ -227,6 +219,10 @@ static u32 inline td_status(struct uhci_td *td) {
227 219
228 220
229/* 221/*
222 * Skeleton Queue Headers
223 */
224
225/*
230 * The UHCI driver places Interrupt, Control and Bulk into QH's both 226 * The UHCI driver places Interrupt, Control and Bulk into QH's both
231 * to group together TD's for one transfer, and also to faciliate queuing 227 * to group together TD's for one transfer, and also to faciliate queuing
232 * of URB's. To make it easy to insert entries into the schedule, we have 228 * of URB's. To make it easy to insert entries into the schedule, we have
@@ -256,15 +252,15 @@ static u32 inline td_status(struct uhci_td *td) {
256 * 252 *
257 * The terminating QH is used for 2 reasons: 253 * The terminating QH is used for 2 reasons:
258 * - To place a terminating TD which is used to workaround a PIIX bug 254 * - To place a terminating TD which is used to workaround a PIIX bug
259 * (see Intel errata for explanation) 255 * (see Intel errata for explanation), and
260 * - To loop back to the full-speed control queue for full-speed bandwidth 256 * - To loop back to the full-speed control queue for full-speed bandwidth
261 * reclamation 257 * reclamation.
262 * 258 *
263 * Isochronous transfers are stored before the start of the skeleton 259 * Isochronous transfers are stored before the start of the skeleton
264 * schedule and don't use QH's. While the UHCI spec doesn't forbid the 260 * schedule and don't use QH's. While the UHCI spec doesn't forbid the
265 * use of QH's for Isochronous, it doesn't use them either. Since we don't 261 * use of QH's for Isochronous, it doesn't use them either. And the spec
266 * need to use them either, we follow the spec diagrams in hope that it'll 262 * says that queues never advance on an error completion status, which
267 * be more compatible with future UHCI implementations. 263 * makes them totally unsuitable for Isochronous transfers.
268 */ 264 */
269 265
270#define UHCI_NUM_SKELQH 12 266#define UHCI_NUM_SKELQH 12
@@ -314,8 +310,13 @@ static inline int __interval_to_skel(int interval)
314 return 0; /* int128 for 128-255 ms (Max.) */ 310 return 0; /* int128 for 128-255 ms (Max.) */
315} 311}
316 312
313
314/*
315 * The UHCI controller and root hub
316 */
317
317/* 318/*
318 * States for the root hub. 319 * States for the root hub:
319 * 320 *
320 * To prevent "bouncing" in the presence of electrical noise, 321 * To prevent "bouncing" in the presence of electrical noise,
321 * when there are no devices attached we delay for 1 second in the 322 * when there are no devices attached we delay for 1 second in the
@@ -326,7 +327,7 @@ static inline int __interval_to_skel(int interval)
326 */ 327 */
327enum uhci_rh_state { 328enum uhci_rh_state {
328 /* In the following states the HC must be halted. 329 /* In the following states the HC must be halted.
329 * These two must come first */ 330 * These two must come first. */
330 UHCI_RH_RESET, 331 UHCI_RH_RESET,
331 UHCI_RH_SUSPENDED, 332 UHCI_RH_SUSPENDED,
332 333
@@ -338,13 +339,13 @@ enum uhci_rh_state {
338 UHCI_RH_SUSPENDING, 339 UHCI_RH_SUSPENDING,
339 340
340 /* In the following states it's an error if the HC is halted. 341 /* In the following states it's an error if the HC is halted.
341 * These two must come last */ 342 * These two must come last. */
342 UHCI_RH_RUNNING, /* The normal state */ 343 UHCI_RH_RUNNING, /* The normal state */
343 UHCI_RH_RUNNING_NODEVS, /* Running with no devices attached */ 344 UHCI_RH_RUNNING_NODEVS, /* Running with no devices attached */
344}; 345};
345 346
346/* 347/*
347 * This describes the full uhci information. 348 * The full UHCI controller information:
348 */ 349 */
349struct uhci_hcd { 350struct uhci_hcd {
350 351
@@ -361,7 +362,11 @@ struct uhci_hcd {
361 struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QH's */ 362 struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QH's */
362 363
363 spinlock_t lock; 364 spinlock_t lock;
364 struct uhci_frame_list *fl; /* P: uhci->lock */ 365
366 dma_addr_t frame_dma_handle; /* Hardware frame list */
367 __le32 *frame;
368 void **frame_cpu; /* CPU's frame list */
369
365 int fsbr; /* Full-speed bandwidth reclamation */ 370 int fsbr; /* Full-speed bandwidth reclamation */
366 unsigned long fsbrtimeout; /* FSBR delay */ 371 unsigned long fsbrtimeout; /* FSBR delay */
367 372
@@ -385,22 +390,22 @@ struct uhci_hcd {
385 unsigned long ports_timeout; /* Time to stop signalling */ 390 unsigned long ports_timeout; /* Time to stop signalling */
386 391
387 /* Main list of URB's currently controlled by this HC */ 392 /* Main list of URB's currently controlled by this HC */
388 struct list_head urb_list; /* P: uhci->lock */ 393 struct list_head urb_list;
389 394
390 /* List of QH's that are done, but waiting to be unlinked (race) */ 395 /* List of QH's that are done, but waiting to be unlinked (race) */
391 struct list_head qh_remove_list; /* P: uhci->lock */ 396 struct list_head qh_remove_list;
392 unsigned int qh_remove_age; /* Age in frames */ 397 unsigned int qh_remove_age; /* Age in frames */
393 398
394 /* List of TD's that are done, but waiting to be freed (race) */ 399 /* List of TD's that are done, but waiting to be freed (race) */
395 struct list_head td_remove_list; /* P: uhci->lock */ 400 struct list_head td_remove_list;
396 unsigned int td_remove_age; /* Age in frames */ 401 unsigned int td_remove_age; /* Age in frames */
397 402
398 /* List of asynchronously unlinked URB's */ 403 /* List of asynchronously unlinked URB's */
399 struct list_head urb_remove_list; /* P: uhci->lock */ 404 struct list_head urb_remove_list;
400 unsigned int urb_remove_age; /* Age in frames */ 405 unsigned int urb_remove_age; /* Age in frames */
401 406
402 /* List of URB's awaiting completion callback */ 407 /* List of URB's awaiting completion callback */
403 struct list_head complete_list; /* P: uhci->lock */ 408 struct list_head complete_list;
404 409
405 int rh_numports; /* Number of root-hub ports */ 410 int rh_numports; /* Number of root-hub ports */
406 411
@@ -419,13 +424,17 @@ static inline struct usb_hcd *uhci_to_hcd(struct uhci_hcd *uhci)
419 424
420#define uhci_dev(u) (uhci_to_hcd(u)->self.controller) 425#define uhci_dev(u) (uhci_to_hcd(u)->self.controller)
421 426
427
428/*
429 * Private per-URB data
430 */
422struct urb_priv { 431struct urb_priv {
423 struct list_head urb_list; 432 struct list_head urb_list;
424 433
425 struct urb *urb; 434 struct urb *urb;
426 435
427 struct uhci_qh *qh; /* QH for this URB */ 436 struct uhci_qh *qh; /* QH for this URB */
428 struct list_head td_list; /* P: urb->lock */ 437 struct list_head td_list;
429 438
430 unsigned fsbr : 1; /* URB turned on FSBR */ 439 unsigned fsbr : 1; /* URB turned on FSBR */
431 unsigned fsbr_timeout : 1; /* URB timed out on FSBR */ 440 unsigned fsbr_timeout : 1; /* URB timed out on FSBR */
@@ -434,12 +443,12 @@ struct urb_priv {
434 /* a control transfer, retrigger */ 443 /* a control transfer, retrigger */
435 /* the status phase */ 444 /* the status phase */
436 445
437 unsigned long inserttime; /* In jiffies */
438 unsigned long fsbrtime; /* In jiffies */ 446 unsigned long fsbrtime; /* In jiffies */
439 447
440 struct list_head queue_list; /* P: uhci->frame_list_lock */ 448 struct list_head queue_list;
441}; 449};
442 450
451
443/* 452/*
444 * Locking in uhci.c 453 * Locking in uhci.c
445 * 454 *
@@ -459,6 +468,5 @@ struct urb_priv {
459 468
460#define PCI_VENDOR_ID_GENESYS 0x17a0 469#define PCI_VENDOR_ID_GENESYS 0x17a0
461#define PCI_DEVICE_ID_GL880S_UHCI 0x8083 470#define PCI_DEVICE_ID_GL880S_UHCI 0x8083
462#define PCI_DEVICE_ID_GL880S_EHCI 0x8084
463 471
464#endif 472#endif
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 4e0fbe2c1a9a..7e46887d9e12 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -89,10 +89,10 @@ static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td,
89 td->frame = framenum; 89 td->frame = framenum;
90 90
91 /* Is there a TD already mapped there? */ 91 /* Is there a TD already mapped there? */
92 if (uhci->fl->frame_cpu[framenum]) { 92 if (uhci->frame_cpu[framenum]) {
93 struct uhci_td *ftd, *ltd; 93 struct uhci_td *ftd, *ltd;
94 94
95 ftd = uhci->fl->frame_cpu[framenum]; 95 ftd = uhci->frame_cpu[framenum];
96 ltd = list_entry(ftd->fl_list.prev, struct uhci_td, fl_list); 96 ltd = list_entry(ftd->fl_list.prev, struct uhci_td, fl_list);
97 97
98 list_add_tail(&td->fl_list, &ftd->fl_list); 98 list_add_tail(&td->fl_list, &ftd->fl_list);
@@ -101,29 +101,32 @@ static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td,
101 wmb(); 101 wmb();
102 ltd->link = cpu_to_le32(td->dma_handle); 102 ltd->link = cpu_to_le32(td->dma_handle);
103 } else { 103 } else {
104 td->link = uhci->fl->frame[framenum]; 104 td->link = uhci->frame[framenum];
105 wmb(); 105 wmb();
106 uhci->fl->frame[framenum] = cpu_to_le32(td->dma_handle); 106 uhci->frame[framenum] = cpu_to_le32(td->dma_handle);
107 uhci->fl->frame_cpu[framenum] = td; 107 uhci->frame_cpu[framenum] = td;
108 } 108 }
109} 109}
110 110
111static void uhci_remove_td(struct uhci_hcd *uhci, struct uhci_td *td) 111static inline void uhci_remove_td_frame_list(struct uhci_hcd *uhci,
112 struct uhci_td *td)
112{ 113{
113 /* If it's not inserted, don't remove it */ 114 /* If it's not inserted, don't remove it */
114 if (td->frame == -1 && list_empty(&td->fl_list)) 115 if (td->frame == -1) {
116 WARN_ON(!list_empty(&td->fl_list));
115 return; 117 return;
118 }
116 119
117 if (td->frame != -1 && uhci->fl->frame_cpu[td->frame] == td) { 120 if (uhci->frame_cpu[td->frame] == td) {
118 if (list_empty(&td->fl_list)) { 121 if (list_empty(&td->fl_list)) {
119 uhci->fl->frame[td->frame] = td->link; 122 uhci->frame[td->frame] = td->link;
120 uhci->fl->frame_cpu[td->frame] = NULL; 123 uhci->frame_cpu[td->frame] = NULL;
121 } else { 124 } else {
122 struct uhci_td *ntd; 125 struct uhci_td *ntd;
123 126
124 ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list); 127 ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list);
125 uhci->fl->frame[td->frame] = cpu_to_le32(ntd->dma_handle); 128 uhci->frame[td->frame] = cpu_to_le32(ntd->dma_handle);
126 uhci->fl->frame_cpu[td->frame] = ntd; 129 uhci->frame_cpu[td->frame] = ntd;
127 } 130 }
128 } else { 131 } else {
129 struct uhci_td *ptd; 132 struct uhci_td *ptd;
@@ -132,13 +135,20 @@ static void uhci_remove_td(struct uhci_hcd *uhci, struct uhci_td *td)
132 ptd->link = td->link; 135 ptd->link = td->link;
133 } 136 }
134 137
135 wmb();
136 td->link = UHCI_PTR_TERM;
137
138 list_del_init(&td->fl_list); 138 list_del_init(&td->fl_list);
139 td->frame = -1; 139 td->frame = -1;
140} 140}
141 141
142static void unlink_isochronous_tds(struct uhci_hcd *uhci, struct urb *urb)
143{
144 struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv;
145 struct uhci_td *td;
146
147 list_for_each_entry(td, &urbp->td_list, list)
148 uhci_remove_td_frame_list(uhci, td);
149 wmb();
150}
151
142/* 152/*
143 * Inserts a td list into qh. 153 * Inserts a td list into qh.
144 */ 154 */
@@ -443,7 +453,6 @@ static struct urb_priv *uhci_alloc_urb_priv(struct uhci_hcd *uhci, struct urb *u
443 453
444 memset((void *)urbp, 0, sizeof(*urbp)); 454 memset((void *)urbp, 0, sizeof(*urbp));
445 455
446 urbp->inserttime = jiffies;
447 urbp->fsbrtime = jiffies; 456 urbp->fsbrtime = jiffies;
448 urbp->urb = urb; 457 urbp->urb = urb;
449 458
@@ -462,8 +471,6 @@ static void uhci_add_td_to_urb(struct urb *urb, struct uhci_td *td)
462{ 471{
463 struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; 472 struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
464 473
465 td->urb = urb;
466
467 list_add_tail(&td->list, &urbp->td_list); 474 list_add_tail(&td->list, &urbp->td_list);
468} 475}
469 476
@@ -473,8 +480,6 @@ static void uhci_remove_td_from_urb(struct uhci_td *td)
473 return; 480 return;
474 481
475 list_del_init(&td->list); 482 list_del_init(&td->list);
476
477 td->urb = NULL;
478} 483}
479 484
480static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb) 485static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
@@ -503,7 +508,6 @@ static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
503 508
504 list_for_each_entry_safe(td, tmp, &urbp->td_list, list) { 509 list_for_each_entry_safe(td, tmp, &urbp->td_list, list) {
505 uhci_remove_td_from_urb(td); 510 uhci_remove_td_from_urb(td);
506 uhci_remove_td(uhci, td);
507 list_add(&td->remove_list, &uhci->td_remove_list); 511 list_add(&td->remove_list, &uhci->td_remove_list);
508 } 512 }
509 513
@@ -1073,6 +1077,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb)
1073 struct uhci_td *td; 1077 struct uhci_td *td;
1074 int i, ret, frame; 1078 int i, ret, frame;
1075 int status, destination; 1079 int status, destination;
1080 struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv;
1076 1081
1077 status = TD_CTRL_ACTIVE | TD_CTRL_IOS; 1082 status = TD_CTRL_ACTIVE | TD_CTRL_IOS;
1078 destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe); 1083 destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
@@ -1081,11 +1086,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb)
1081 if (ret) 1086 if (ret)
1082 return ret; 1087 return ret;
1083 1088
1084 frame = urb->start_frame; 1089 for (i = 0; i < urb->number_of_packets; i++) {
1085 for (i = 0; i < urb->number_of_packets; i++, frame += urb->interval) {
1086 if (!urb->iso_frame_desc[i].length)
1087 continue;
1088
1089 td = uhci_alloc_td(uhci); 1090 td = uhci_alloc_td(uhci);
1090 if (!td) 1091 if (!td)
1091 return -ENOMEM; 1092 return -ENOMEM;
@@ -1096,8 +1097,12 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb)
1096 1097
1097 if (i + 1 >= urb->number_of_packets) 1098 if (i + 1 >= urb->number_of_packets)
1098 td->status |= cpu_to_le32(TD_CTRL_IOC); 1099 td->status |= cpu_to_le32(TD_CTRL_IOC);
1100 }
1099 1101
1102 frame = urb->start_frame;
1103 list_for_each_entry(td, &urbp->td_list, list) {
1100 uhci_insert_td_frame_list(uhci, td, frame); 1104 uhci_insert_td_frame_list(uhci, td, frame);
1105 frame += urb->interval;
1101 } 1106 }
1102 1107
1103 return -EINPROGRESS; 1108 return -EINPROGRESS;
@@ -1110,7 +1115,7 @@ static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb)
1110 int status; 1115 int status;
1111 int i, ret = 0; 1116 int i, ret = 0;
1112 1117
1113 urb->actual_length = 0; 1118 urb->actual_length = urb->error_count = 0;
1114 1119
1115 i = 0; 1120 i = 0;
1116 list_for_each_entry(td, &urbp->td_list, list) { 1121 list_for_each_entry(td, &urbp->td_list, list) {
@@ -1134,6 +1139,7 @@ static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb)
1134 1139
1135 i++; 1140 i++;
1136 } 1141 }
1142 unlink_isochronous_tds(uhci, urb);
1137 1143
1138 return ret; 1144 return ret;
1139} 1145}
@@ -1366,6 +1372,8 @@ static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
1366 goto done; 1372 goto done;
1367 list_del_init(&urbp->urb_list); 1373 list_del_init(&urbp->urb_list);
1368 1374
1375 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
1376 unlink_isochronous_tds(uhci, urb);
1369 uhci_unlink_generic(uhci, urb); 1377 uhci_unlink_generic(uhci, urb);
1370 1378
1371 uhci_get_current_frame_number(uhci); 1379 uhci_get_current_frame_number(uhci);
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index a330a4b50e16..1d973bcf56aa 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -425,9 +425,8 @@ static void mdc800_usb_download_notify (struct urb *urb, struct pt_regs *res)
425static struct usb_driver mdc800_usb_driver; 425static struct usb_driver mdc800_usb_driver;
426static struct file_operations mdc800_device_ops; 426static struct file_operations mdc800_device_ops;
427static struct usb_class_driver mdc800_class = { 427static struct usb_class_driver mdc800_class = {
428 .name = "usb/mdc800%d", 428 .name = "mdc800%d",
429 .fops = &mdc800_device_ops, 429 .fops = &mdc800_device_ops,
430 .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
431 .minor_base = MDC800_DEVICE_MINOR_BASE, 430 .minor_base = MDC800_DEVICE_MINOR_BASE,
432}; 431};
433 432
@@ -976,13 +975,13 @@ static struct usb_driver mdc800_usb_driver =
976 Init and Cleanup this driver (Main Functions) 975 Init and Cleanup this driver (Main Functions)
977*************************************************************************/ 976*************************************************************************/
978 977
979#define try(A) if (!(A)) goto cleanup_on_fail;
980
981static int __init usb_mdc800_init (void) 978static int __init usb_mdc800_init (void)
982{ 979{
983 int retval = -ENODEV; 980 int retval = -ENODEV;
984 /* Allocate Memory */ 981 /* Allocate Memory */
985 try (mdc800=kmalloc (sizeof (struct mdc800_data), GFP_KERNEL)); 982 mdc800=kmalloc (sizeof (struct mdc800_data), GFP_KERNEL);
983 if (!mdc800)
984 goto cleanup_on_fail;
986 985
987 memset(mdc800, 0, sizeof(struct mdc800_data)); 986 memset(mdc800, 0, sizeof(struct mdc800_data));
988 mdc800->dev = NULL; 987 mdc800->dev = NULL;
@@ -998,13 +997,25 @@ static int __init usb_mdc800_init (void)
998 mdc800->downloaded = 0; 997 mdc800->downloaded = 0;
999 mdc800->written = 0; 998 mdc800->written = 0;
1000 999
1001 try (mdc800->irq_urb_buffer=kmalloc (8, GFP_KERNEL)); 1000 mdc800->irq_urb_buffer=kmalloc (8, GFP_KERNEL);
1002 try (mdc800->write_urb_buffer=kmalloc (8, GFP_KERNEL)); 1001 if (!mdc800->irq_urb_buffer)
1003 try (mdc800->download_urb_buffer=kmalloc (64, GFP_KERNEL)); 1002 goto cleanup_on_fail;
1003 mdc800->write_urb_buffer=kmalloc (8, GFP_KERNEL);
1004 if (!mdc800->write_urb_buffer)
1005 goto cleanup_on_fail;
1006 mdc800->download_urb_buffer=kmalloc (64, GFP_KERNEL);
1007 if (!mdc800->download_urb_buffer)
1008 goto cleanup_on_fail;
1004 1009
1005 try (mdc800->irq_urb=usb_alloc_urb (0, GFP_KERNEL)); 1010 mdc800->irq_urb=usb_alloc_urb (0, GFP_KERNEL);
1006 try (mdc800->download_urb=usb_alloc_urb (0, GFP_KERNEL)); 1011 if (!mdc800->irq_urb)
1007 try (mdc800->write_urb=usb_alloc_urb (0, GFP_KERNEL)); 1012 goto cleanup_on_fail;
1013 mdc800->download_urb=usb_alloc_urb (0, GFP_KERNEL);
1014 if (!mdc800->download_urb)
1015 goto cleanup_on_fail;
1016 mdc800->write_urb=usb_alloc_urb (0, GFP_KERNEL);
1017 if (!mdc800->write_urb)
1018 goto cleanup_on_fail;
1008 1019
1009 /* Register the driver */ 1020 /* Register the driver */
1010 retval = usb_register(&mdc800_usb_driver); 1021 retval = usb_register(&mdc800_usb_driver);
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index c84e1486054f..c89d0769b3da 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -773,11 +773,10 @@ static int mts_usb_probe(struct usb_interface *intf,
773 } 773 }
774 774
775 775
776 new_desc = kmalloc(sizeof(struct mts_desc), GFP_KERNEL); 776 new_desc = kzalloc(sizeof(struct mts_desc), GFP_KERNEL);
777 if (!new_desc) 777 if (!new_desc)
778 goto out; 778 goto out;
779 779
780 memset(new_desc, 0, sizeof(*new_desc));
781 new_desc->urb = usb_alloc_urb(0, GFP_KERNEL); 780 new_desc->urb = usb_alloc_urb(0, GFP_KERNEL);
782 if (!new_desc->urb) 781 if (!new_desc->urb)
783 goto out_kfree; 782 goto out_kfree;
diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c
index 1c5205321d83..1c3b472a3bca 100644
--- a/drivers/usb/input/aiptek.c
+++ b/drivers/usb/input/aiptek.c
@@ -2154,7 +2154,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
2154 * input_handles associated with this input device. 2154 * input_handles associated with this input device.
2155 * What identifies an evdev input_handler is that it begins 2155 * What identifies an evdev input_handler is that it begins
2156 * with 'event', continues with a digit, and that in turn 2156 * with 'event', continues with a digit, and that in turn
2157 * is mapped to /{devfs}/input/eventN. 2157 * is mapped to input/eventN.
2158 */ 2158 */
2159 list_for_each_safe(node, next, &inputdev->h_list) { 2159 list_for_each_safe(node, next, &inputdev->h_list) {
2160 inputhandle = to_handle(node); 2160 inputhandle = to_handle(node);
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 411a0645a7a3..79ddce4555ab 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1784,6 +1784,9 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
1784 hid->urbctrl->transfer_dma = hid->ctrlbuf_dma; 1784 hid->urbctrl->transfer_dma = hid->ctrlbuf_dma;
1785 hid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP); 1785 hid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
1786 1786
1787 /* May be needed for some devices */
1788 usb_clear_halt(hid->dev, hid->urbin->pipe);
1789
1787 return hid; 1790 return hid;
1788 1791
1789fail: 1792fail:
@@ -1887,7 +1890,6 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message)
1887 struct hid_device *hid = usb_get_intfdata (intf); 1890 struct hid_device *hid = usb_get_intfdata (intf);
1888 1891
1889 usb_kill_urb(hid->urbin); 1892 usb_kill_urb(hid->urbin);
1890 intf->dev.power.power_state = PMSG_SUSPEND;
1891 dev_dbg(&intf->dev, "suspend\n"); 1893 dev_dbg(&intf->dev, "suspend\n");
1892 return 0; 1894 return 0;
1893} 1895}
@@ -1897,7 +1899,6 @@ static int hid_resume(struct usb_interface *intf)
1897 struct hid_device *hid = usb_get_intfdata (intf); 1899 struct hid_device *hid = usb_get_intfdata (intf);
1898 int status; 1900 int status;
1899 1901
1900 intf->dev.power.power_state = PMSG_ON;
1901 if (hid->open) 1902 if (hid->open)
1902 status = usb_submit_urb(hid->urbin, GFP_NOIO); 1903 status = usb_submit_urb(hid->urbin, GFP_NOIO);
1903 else 1904 else
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
index d32427818af7..440377c7a0da 100644
--- a/drivers/usb/input/hiddev.c
+++ b/drivers/usb/input/hiddev.c
@@ -732,9 +732,8 @@ static struct file_operations hiddev_fops = {
732}; 732};
733 733
734static struct usb_class_driver hiddev_class = { 734static struct usb_class_driver hiddev_class = {
735 .name = "usb/hid/hiddev%d", 735 .name = "hiddev%d",
736 .fops = &hiddev_fops, 736 .fops = &hiddev_fops,
737 .mode = S_IFCHR | S_IRUGO | S_IWUSR,
738 .minor_base = HIDDEV_MINOR_BASE, 737 .minor_base = HIDDEV_MINOR_BASE,
739}; 738};
740 739
diff --git a/drivers/usb/input/map_to_7segment.h b/drivers/usb/input/map_to_7segment.h
index 52ff27f15127..a424094d9fe2 100644
--- a/drivers/usb/input/map_to_7segment.h
+++ b/drivers/usb/input/map_to_7segment.h
@@ -79,7 +79,7 @@ struct seg7_conversion_map {
79 79
80static inline int map_to_seg7(struct seg7_conversion_map *map, int c) 80static inline int map_to_seg7(struct seg7_conversion_map *map, int c)
81{ 81{
82 return c & 0x7f ? map->table[c] : -EINVAL; 82 return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL;
83} 83}
84 84
85#define SEG7_CONVERSION_MAP(_name, _map) \ 85#define SEG7_CONVERSION_MAP(_name, _map) \
diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c
index 3766ccc271be..0043e6ebcd1f 100644
--- a/drivers/usb/input/touchkitusb.c
+++ b/drivers/usb/input/touchkitusb.c
@@ -75,7 +75,9 @@ struct touchkit_usb {
75 75
76static struct usb_device_id touchkit_devices[] = { 76static struct usb_device_id touchkit_devices[] = {
77 {USB_DEVICE(0x3823, 0x0001)}, 77 {USB_DEVICE(0x3823, 0x0001)},
78 {USB_DEVICE(0x0123, 0x0001)},
78 {USB_DEVICE(0x0eef, 0x0001)}, 79 {USB_DEVICE(0x0eef, 0x0001)},
80 {USB_DEVICE(0x0eef, 0x0002)},
79 {} 81 {}
80}; 82};
81 83
diff --git a/drivers/usb/media/dabusb.c b/drivers/usb/media/dabusb.c
index 6ca2fae99d2d..27b23c55bbc7 100644
--- a/drivers/usb/media/dabusb.c
+++ b/drivers/usb/media/dabusb.c
@@ -707,9 +707,8 @@ static struct file_operations dabusb_fops =
707}; 707};
708 708
709static struct usb_class_driver dabusb_class = { 709static struct usb_class_driver dabusb_class = {
710 .name = "usb/dabusb%d", 710 .name = "dabusb%d",
711 .fops = &dabusb_fops, 711 .fops = &dabusb_fops,
712 .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
713 .minor_base = DABUSB_MINOR, 712 .minor_base = DABUSB_MINOR,
714}; 713};
715 714
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
index ae4681f9f0ea..5f33f7c64885 100644
--- a/drivers/usb/misc/auerswald.c
+++ b/drivers/usb/misc/auerswald.c
@@ -1873,9 +1873,8 @@ static struct file_operations auerswald_fops =
1873}; 1873};
1874 1874
1875static struct usb_class_driver auerswald_class = { 1875static struct usb_class_driver auerswald_class = {
1876 .name = "usb/auer%d", 1876 .name = "auer%d",
1877 .fops = &auerswald_fops, 1877 .fops = &auerswald_fops,
1878 .mode = S_IFCHR | S_IRUGO | S_IWUGO,
1879 .minor_base = AUER_MINOR_BASE, 1878 .minor_base = AUER_MINOR_BASE,
1880}; 1879};
1881 1880
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 733acc213726..3944a55ed74c 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -105,11 +105,10 @@ static struct file_operations idmouse_fops = {
105 .release = idmouse_release, 105 .release = idmouse_release,
106}; 106};
107 107
108/* class driver information for devfs */ 108/* class driver information */
109static struct usb_class_driver idmouse_class = { 109static struct usb_class_driver idmouse_class = {
110 .name = "usb/idmouse%d", 110 .name = "idmouse%d",
111 .fops = &idmouse_fops, 111 .fops = &idmouse_fops,
112 .mode = S_IFCHR | S_IRUSR | S_IRGRP | S_IROTH, /* filemode (char, 444) */
113 .minor_base = USB_IDMOUSE_MINOR_BASE, 112 .minor_base = USB_IDMOUSE_MINOR_BASE,
114}; 113};
115 114
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 7d06105763d4..2703e205bc8f 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -271,12 +271,11 @@ static struct file_operations tower_fops = {
271 271
272/* 272/*
273 * usb class driver info in order to get a minor number from the usb core, 273 * usb class driver info in order to get a minor number from the usb core,
274 * and to have the device registered with devfs and the driver core 274 * and to have the device registered with the driver core
275 */ 275 */
276static struct usb_class_driver tower_class = { 276static struct usb_class_driver tower_class = {
277 .name = "usb/legousbtower%d", 277 .name = "legousbtower%d",
278 .fops = &tower_fops, 278 .fops = &tower_fops,
279 .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH,
280 .minor_base = LEGO_USB_TOWER_MINOR_BASE, 279 .minor_base = LEGO_USB_TOWER_MINOR_BASE,
281}; 280};
282 281
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index 26f77e29c7a6..7d02d8ec6b1a 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -443,9 +443,8 @@ file_operations usb_rio_fops = {
443}; 443};
444 444
445static struct usb_class_driver usb_rio_class = { 445static struct usb_class_driver usb_rio_class = {
446 .name = "usb/rio500%d", 446 .name = "rio500%d",
447 .fops = &usb_rio_fops, 447 .fops = &usb_rio_fops,
448 .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
449 .minor_base = RIO_MINOR, 448 .minor_base = RIO_MINOR,
450}; 449};
451 450
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 39db3155723a..c946c9a538a0 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -2440,7 +2440,7 @@ int
2440sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init) 2440sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init)
2441{ 2441{
2442 int ret = 0, slot = sisusb->font_slot, i; 2442 int ret = 0, slot = sisusb->font_slot, i;
2443 struct font_desc *myfont; 2443 const struct font_desc *myfont;
2444 u8 *tempbuf; 2444 u8 *tempbuf;
2445 u16 *tempbufb; 2445 u16 *tempbufb;
2446 size_t written; 2446 size_t written;
@@ -3239,12 +3239,7 @@ static struct file_operations usb_sisusb_fops = {
3239}; 3239};
3240 3240
3241static struct usb_class_driver usb_sisusb_class = { 3241static struct usb_class_driver usb_sisusb_class = {
3242#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13)
3243 .name = "usb/sisusbvga%d",
3244 .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
3245#else
3246 .name = "sisusbvga%d", 3242 .name = "sisusbvga%d",
3247#endif
3248 .fops = &usb_sisusb_fops, 3243 .fops = &usb_sisusb_fops,
3249 .minor_base = SISUSB_MINOR 3244 .minor_base = SISUSB_MINOR
3250}; 3245};
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 096ab3029676..85f3725334b0 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -251,13 +251,12 @@ static struct file_operations lcd_fops = {
251}; 251};
252 252
253/* 253/*
254 * * usb class driver info in order to get a minor number from the usb core, 254 * usb class driver info in order to get a minor number from the usb core,
255 * * and to have the device registered with devfs and the driver core 255 * and to have the device registered with the driver core
256 * */ 256 */
257static struct usb_class_driver lcd_class = { 257static struct usb_class_driver lcd_class = {
258 .name = "usb/lcd%d", 258 .name = "lcd%d",
259 .fops = &lcd_fops, 259 .fops = &lcd_fops,
260 .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH,
261 .minor_base = USBLCD_MINOR, 260 .minor_base = USBLCD_MINOR,
262}; 261};
263 262
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 54799eb0bc60..90a96257d6ce 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -983,6 +983,7 @@ test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param)
983 reqp->number = i % NUM_SUBCASES; 983 reqp->number = i % NUM_SUBCASES;
984 reqp->expected = expected; 984 reqp->expected = expected;
985 u->setup_packet = (char *) &reqp->setup; 985 u->setup_packet = (char *) &reqp->setup;
986 u->transfer_flags |= URB_NO_SETUP_DMA_MAP;
986 987
987 u->context = &context; 988 u->context = &context;
988 u->complete = ctrl_complete; 989 u->complete = ctrl_complete;
@@ -1948,21 +1949,11 @@ usbtest_probe (struct usb_interface *intf, const struct usb_device_id *id)
1948 1949
1949static int usbtest_suspend (struct usb_interface *intf, pm_message_t message) 1950static int usbtest_suspend (struct usb_interface *intf, pm_message_t message)
1950{ 1951{
1951 struct usbtest_dev *dev = usb_get_intfdata (intf);
1952
1953 down (&dev->sem);
1954 intf->dev.power.power_state = PMSG_SUSPEND;
1955 up (&dev->sem);
1956 return 0; 1952 return 0;
1957} 1953}
1958 1954
1959static int usbtest_resume (struct usb_interface *intf) 1955static int usbtest_resume (struct usb_interface *intf)
1960{ 1956{
1961 struct usbtest_dev *dev = usb_get_intfdata (intf);
1962
1963 down (&dev->sem);
1964 intf->dev.power.power_state = PMSG_ON;
1965 up (&dev->sem);
1966 return 0; 1957 return 0;
1967} 1958}
1968 1959
diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c
index 508a21028db4..c34944c75047 100644
--- a/drivers/usb/mon/mon_main.c
+++ b/drivers/usb/mon/mon_main.c
@@ -11,6 +11,7 @@
11#include <linux/usb.h> 11#include <linux/usb.h>
12#include <linux/debugfs.h> 12#include <linux/debugfs.h>
13#include <linux/smp_lock.h> 13#include <linux/smp_lock.h>
14#include <linux/notifier.h>
14 15
15#include "usb_mon.h" 16#include "usb_mon.h"
16#include "../core/hcd.h" 17#include "../core/hcd.h"
@@ -205,6 +206,23 @@ static void mon_bus_remove(struct usb_bus *ubus)
205 up(&mon_lock); 206 up(&mon_lock);
206} 207}
207 208
209static int mon_notify(struct notifier_block *self, unsigned long action,
210 void *dev)
211{
212 switch (action) {
213 case USB_BUS_ADD:
214 mon_bus_add(dev);
215 break;
216 case USB_BUS_REMOVE:
217 mon_bus_remove(dev);
218 }
219 return NOTIFY_OK;
220}
221
222static struct notifier_block mon_nb = {
223 .notifier_call = mon_notify,
224};
225
208/* 226/*
209 * Ops 227 * Ops
210 */ 228 */
@@ -212,8 +230,6 @@ static struct usb_mon_operations mon_ops_0 = {
212 .urb_submit = mon_submit, 230 .urb_submit = mon_submit,
213 .urb_submit_error = mon_submit_error, 231 .urb_submit_error = mon_submit_error,
214 .urb_complete = mon_complete, 232 .urb_complete = mon_complete,
215 .bus_add = mon_bus_add,
216 .bus_remove = mon_bus_remove,
217}; 233};
218 234
219/* 235/*
@@ -329,6 +345,8 @@ static int __init mon_init(void)
329 } 345 }
330 // MOD_INC_USE_COUNT(which_module?); 346 // MOD_INC_USE_COUNT(which_module?);
331 347
348 usb_register_notify(&mon_nb);
349
332 down(&usb_bus_list_lock); 350 down(&usb_bus_list_lock);
333 list_for_each_entry (ubus, &usb_bus_list, bus_list) { 351 list_for_each_entry (ubus, &usb_bus_list, bus_list) {
334 mon_bus_init(mondir, ubus); 352 mon_bus_init(mondir, ubus);
@@ -342,6 +360,7 @@ static void __exit mon_exit(void)
342 struct mon_bus *mbus; 360 struct mon_bus *mbus;
343 struct list_head *p; 361 struct list_head *p;
344 362
363 usb_unregister_notify(&mon_nb);
345 usb_mon_deregister(); 364 usb_mon_deregister();
346 365
347 down(&mon_lock); 366 down(&mon_lock);
diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
index 8c010bb44eb8..efd6ca7e4ac5 100644
--- a/drivers/usb/net/Kconfig
+++ b/drivers/usb/net/Kconfig
@@ -294,7 +294,7 @@ config USB_NET_ZAURUS
294 This also supports some related device firmware, as used in some 294 This also supports some related device firmware, as used in some
295 PDAs from Olympus and some cell phones from Motorola. 295 PDAs from Olympus and some cell phones from Motorola.
296 296
297 If you install an alternate ROM image, such as the Linux 2.6 based 297 If you install an alternate image, such as the Linux 2.6 based
298 versions of OpenZaurus, you should no longer need to support this 298 versions of OpenZaurus, you should no longer need to support this
299 protocol. Only the "eth-fd" or "net_fd" drivers in these devices 299 protocol. Only the "eth-fd" or "net_fd" drivers in these devices
300 really need this non-conformant variant of CDC Ethernet (or in 300 really need this non-conformant variant of CDC Ethernet (or in
diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c
index c82655d3d448..6bef1be6b36c 100644
--- a/drivers/usb/net/kaweth.c
+++ b/drivers/usb/net/kaweth.c
@@ -469,7 +469,7 @@ static int kaweth_reset(struct kaweth_device *kaweth)
469 0, 469 0,
470 KAWETH_CONTROL_TIMEOUT); 470 KAWETH_CONTROL_TIMEOUT);
471 471
472 udelay(10000); 472 mdelay(10);
473 473
474 kaweth_dbg("kaweth_reset() returns %d.",result); 474 kaweth_dbg("kaweth_reset() returns %d.",result);
475 475
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 6a4ffe6c3977..537eb181d985 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -1384,7 +1384,6 @@ static int pegasus_suspend (struct usb_interface *intf, pm_message_t message)
1384 usb_kill_urb(pegasus->rx_urb); 1384 usb_kill_urb(pegasus->rx_urb);
1385 usb_kill_urb(pegasus->intr_urb); 1385 usb_kill_urb(pegasus->intr_urb);
1386 } 1386 }
1387 intf->dev.power.power_state = PMSG_SUSPEND;
1388 return 0; 1387 return 0;
1389} 1388}
1390 1389
@@ -1392,7 +1391,6 @@ static int pegasus_resume (struct usb_interface *intf)
1392{ 1391{
1393 struct pegasus *pegasus = usb_get_intfdata(intf); 1392 struct pegasus *pegasus = usb_get_intfdata(intf);
1394 1393
1395 intf->dev.power.power_state = PMSG_ON;
1396 netif_device_attach (pegasus->net); 1394 netif_device_attach (pegasus->net);
1397 if (netif_running(pegasus->net)) { 1395 if (netif_running(pegasus->net)) {
1398 pegasus->rx_urb->status = 0; 1396 pegasus->rx_urb->status = 0;
diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h
index b98f2a833442..9fbd59b55cb6 100644
--- a/drivers/usb/net/pegasus.h
+++ b/drivers/usb/net/pegasus.h
@@ -181,6 +181,8 @@ PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
181 DEFAULT_GPIO_RESET ) 181 DEFAULT_GPIO_RESET )
182PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046, 182PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
183 DEFAULT_GPIO_RESET | PEGASUS_II ) 183 DEFAULT_GPIO_RESET | PEGASUS_II )
184PEGASUS_DEV( "Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
185 DEFAULT_GPIO_RESET | PEGASUS_II )
184PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet", 186PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
185 VENDOR_ADMTEK, 0x8511, 187 VENDOR_ADMTEK, 0x8511,
186 DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA ) 188 DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
index c3d4e3589e30..787dd3591d6a 100644
--- a/drivers/usb/net/rtl8150.c
+++ b/drivers/usb/net/rtl8150.c
@@ -909,6 +909,7 @@ static void rtl8150_disconnect(struct usb_interface *intf)
909 usb_set_intfdata(intf, NULL); 909 usb_set_intfdata(intf, NULL);
910 if (dev) { 910 if (dev) {
911 set_bit(RTL8150_UNPLUG, &dev->flags); 911 set_bit(RTL8150_UNPLUG, &dev->flags);
912 tasklet_disable(&dev->tl);
912 unregister_netdev(dev->netdev); 913 unregister_netdev(dev->netdev);
913 unlink_all_urbs(dev); 914 unlink_all_urbs(dev);
914 free_all_urbs(dev); 915 free_all_urbs(dev);
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index fce81d738933..74f05c9c84d5 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -1185,7 +1185,6 @@ int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
1185 netif_device_detach (dev->net); 1185 netif_device_detach (dev->net);
1186 (void) unlink_urbs (dev, &dev->rxq); 1186 (void) unlink_urbs (dev, &dev->rxq);
1187 (void) unlink_urbs (dev, &dev->txq); 1187 (void) unlink_urbs (dev, &dev->txq);
1188 intf->dev.power.power_state = PMSG_SUSPEND;
1189 return 0; 1188 return 0;
1190} 1189}
1191EXPORT_SYMBOL_GPL(usbnet_suspend); 1190EXPORT_SYMBOL_GPL(usbnet_suspend);
@@ -1194,7 +1193,6 @@ int usbnet_resume (struct usb_interface *intf)
1194{ 1193{
1195 struct usbnet *dev = usb_get_intfdata(intf); 1194 struct usbnet *dev = usb_get_intfdata(intf);
1196 1195
1197 intf->dev.power.power_state = PMSG_ON;
1198 netif_device_attach (dev->net); 1196 netif_device_attach (dev->net);
1199 tasklet_schedule (&dev->bh); 1197 tasklet_schedule (&dev->bh);
1200 return 0; 1198 return 0;
diff --git a/drivers/usb/serial/ChangeLog.old b/drivers/usb/serial/ChangeLog.old
new file mode 100644
index 000000000000..c1b279939bbf
--- /dev/null
+++ b/drivers/usb/serial/ChangeLog.old
@@ -0,0 +1,730 @@
1This is the contents of some of the drivers/usb/serial/ files that had old
2changelog comments. They were quite old, and out of date, and we don't keep
3them anymore, so I've put them here, away from the source files, in case
4people still care to see them.
5
6- Greg Kroah-Hartman <greg@kroah.com> October 20, 2005
7
8-----------------------------------------------------------------------
9usb-serial.h Change Log comments:
10
11 (03/26/2002) gkh
12 removed the port->tty check from port_paranoia_check() due to serial
13 consoles not having a tty device assigned to them.
14
15 (12/03/2001) gkh
16 removed active from the port structure.
17 added documentation to the usb_serial_device_type structure
18
19 (10/10/2001) gkh
20 added vendor and product to serial structure. Needed to determine device
21 owner when the device is disconnected.
22
23 (05/30/2001) gkh
24 added sem to port structure and removed port_lock
25
26 (10/05/2000) gkh
27 Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
28 fix bug with urb->dev not being set properly, now that the usb core
29 needs it.
30
31 (09/11/2000) gkh
32 Added usb_serial_debug_data function to help get rid of #DEBUG in the
33 drivers.
34
35 (08/28/2000) gkh
36 Added port_lock to port structure.
37
38 (08/08/2000) gkh
39 Added open_count to port structure.
40
41 (07/23/2000) gkh
42 Added bulk_out_endpointAddress to port structure.
43
44 (07/19/2000) gkh, pberger, and borchers
45 Modifications to allow usb-serial drivers to be modules.
46
47-----------------------------------------------------------------------
48usb-serial.c Change Log comments:
49
50 (12/10/2002) gkh
51 Split the ports off into their own struct device, and added a
52 usb-serial bus driver.
53
54 (11/19/2002) gkh
55 removed a few #ifdefs for the generic code and cleaned up the failure
56 logic in initialization.
57
58 (10/02/2002) gkh
59 moved the console code to console.c and out of this file.
60
61 (06/05/2002) gkh
62 moved location of startup() call in serial_probe() until after all
63 of the port information and endpoints are initialized. This makes
64 things easier for some drivers.
65
66 (04/10/2002) gkh
67 added serial_read_proc function which creates a
68 /proc/tty/driver/usb-serial file.
69
70 (03/27/2002) gkh
71 Got USB serial console code working properly and merged into the main
72 version of the tree. Thanks to Randy Dunlap for the initial version
73 of this code, and for pushing me to finish it up.
74 The USB serial console works with any usb serial driver device.
75
76 (03/21/2002) gkh
77 Moved all manipulation of port->open_count into the core. Now the
78 individual driver's open and close functions are called only when the
79 first open() and last close() is called. Making the drivers a bit
80 smaller and simpler.
81 Fixed a bug if a driver didn't have the owner field set.
82
83 (02/26/2002) gkh
84 Moved all locking into the main serial_* functions, instead of having
85 the individual drivers have to grab the port semaphore. This should
86 reduce races.
87 Reworked the MOD_INC logic a bit to always increment and decrement, even
88 if the generic driver is being used.
89
90 (10/10/2001) gkh
91 usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
92 help prevent child drivers from accessing the device since it is now
93 gone.
94
95 (09/13/2001) gkh
96 Moved generic driver initialize after we have registered with the USB
97 core. Thanks to Randy Dunlap for pointing this problem out.
98
99 (07/03/2001) gkh
100 Fixed module paramater size. Thanks to John Brockmeyer for the pointer.
101 Fixed vendor and product getting defined through the MODULE_PARM macro
102 if the Generic driver wasn't compiled in.
103 Fixed problem with generic_shutdown() not being called for drivers that
104 don't have a shutdown() function.
105
106 (06/06/2001) gkh
107 added evil hack that is needed for the prolific pl2303 device due to the
108 crazy way its endpoints are set up.
109
110 (05/30/2001) gkh
111 switched from using spinlock to a semaphore, which fixes lots of problems.
112
113 (04/08/2001) gb
114 Identify version on module load.
115
116 2001_02_05 gkh
117 Fixed buffer overflows bug with the generic serial driver. Thanks to
118 Todd Squires <squirest@ct0.com> for fixing this.
119
120 (01/10/2001) gkh
121 Fixed bug where the generic serial adaptor grabbed _any_ device that was
122 offered to it.
123
124 (12/12/2000) gkh
125 Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
126 moved them to the serial_open and serial_close functions.
127 Also fixed bug with there not being a MOD_DEC for the generic driver
128 (thanks to Gary Brubaker for finding this.)
129
130 (11/29/2000) gkh
131 Small NULL pointer initialization cleanup which saves a bit of disk image
132
133 (11/01/2000) Adam J. Richter
134 instead of using idVendor/idProduct pairs, usb serial drivers
135 now identify their hardware interest with usb_device_id tables,
136 which they usually have anyhow for use with MODULE_DEVICE_TABLE.
137
138 (10/05/2000) gkh
139 Fixed bug with urb->dev not being set properly, now that the usb
140 core needs it.
141
142 (09/11/2000) gkh
143 Removed DEBUG #ifdefs with call to usb_serial_debug_data
144
145 (08/28/2000) gkh
146 Added port_lock to port structure.
147 Added locks for SMP safeness to generic driver
148 Fixed the ability to open a generic device's port more than once.
149
150 (07/23/2000) gkh
151 Added bulk_out_endpointAddress to port structure.
152
153 (07/19/2000) gkh, pberger, and borchers
154 Modifications to allow usb-serial drivers to be modules.
155
156 (07/03/2000) gkh
157 Added more debugging to serial_ioctl call
158
159 (06/25/2000) gkh
160 Changed generic_write_bulk_callback to not call wake_up_interruptible
161 directly, but to have port_softint do it at a safer time.
162
163 (06/23/2000) gkh
164 Cleaned up debugging statements in a quest to find UHCI timeout bug.
165
166 (05/22/2000) gkh
167 Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
168 removed from the individual device source files.
169
170 (05/03/2000) gkh
171 Added the Digi Acceleport driver from Al Borchers and Peter Berger.
172
173 (05/02/2000) gkh
174 Changed devfs and tty register code to work properly now. This was based on
175 the ACM driver changes by Vojtech Pavlik.
176
177 (04/27/2000) Ryan VanderBijl
178 Put calls to *_paranoia_checks into one function.
179
180 (04/23/2000) gkh
181 Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports.
182 Moved when the startup code printed out the devices that are supported.
183
184 (04/19/2000) gkh
185 Added driver for ZyXEL omni.net lcd plus ISDN TA
186 Made startup info message specify which drivers were compiled in.
187
188 (04/03/2000) gkh
189 Changed the probe process to remove the module unload races.
190 Changed where the tty layer gets initialized to have devfs work nicer.
191 Added initial devfs support.
192
193 (03/26/2000) gkh
194 Split driver up into device specific pieces.
195
196 (03/19/2000) gkh
197 Fixed oops that could happen when device was removed while a program
198 was talking to the device.
199 Removed the static urbs and now all urbs are created and destroyed
200 dynamically.
201 Reworked the internal interface. Now everything is based on the
202 usb_serial_port structure instead of the larger usb_serial structure.
203 This fixes the bug that a multiport device could not have more than
204 one port open at one time.
205
206 (03/17/2000) gkh
207 Added config option for debugging messages.
208 Added patch for keyspan pda from Brian Warner.
209
210 (03/06/2000) gkh
211 Added the keyspan pda code from Brian Warner <warner@lothar.com>
212 Moved a bunch of the port specific stuff into its own structure. This
213 is in anticipation of the true multiport devices (there's a bug if you
214 try to access more than one port of any multiport device right now)
215
216 (02/21/2000) gkh
217 Made it so that any serial devices only have to specify which functions
218 they want to overload from the generic function calls (great,
219 inheritance in C, in a driver, just what I wanted...)
220 Added support for set_termios and ioctl function calls. No drivers take
221 advantage of this yet.
222 Removed the #ifdef MODULE, now there is no module specific code.
223 Cleaned up a few comments in usb-serial.h that were wrong (thanks again
224 to Miles Lott).
225 Small fix to get_free_serial.
226
227 (02/14/2000) gkh
228 Removed the Belkin and Peracom functionality from the driver due to
229 the lack of support from the vendor, and me not wanting people to
230 accidenatly buy the device, expecting it to work with Linux.
231 Added read_bulk_callback and write_bulk_callback to the type structure
232 for the needs of the FTDI and WhiteHEAT driver.
233 Changed all reverences to FTDI to FTDI_SIO at the request of Bill
234 Ryder.
235 Changed the output urb size back to the max endpoint size to make
236 the ftdi_sio driver have it easier, and due to the fact that it didn't
237 really increase the speed any.
238
239 (02/11/2000) gkh
240 Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
241 patch from Miles Lott (milos@insync.net).
242 Fixed bug with not restoring the minor range that a device grabs, if
243 the startup function fails (thanks Miles for finding this).
244
245 (02/05/2000) gkh
246 Added initial framework for the Keyspan PDA serial converter so that
247 Brian Warner has a place to put his code.
248 Made the ezusb specific functions generic enough that different
249 devices can use them (whiteheat and keyspan_pda both need them).
250 Split out a whole bunch of structure and other stuff to a separate
251 usb-serial.h file.
252 Made the Visor connection messages a little more understandable, now
253 that Miles Lott (milos@insync.net) has gotten the Generic channel to
254 work. Also made them always show up in the log file.
255
256 (01/25/2000) gkh
257 Added initial framework for FTDI serial converter so that Bill Ryder
258 has a place to put his code.
259 Added the vendor specific info from Handspring. Now we can print out
260 informational debug messages as well as understand what is happening.
261
262 (01/23/2000) gkh
263 Fixed problem of crash when trying to open a port that didn't have a
264 device assigned to it. Made the minor node finding a little smarter,
265 now it looks to find a continuous space for the new device.
266
267 (01/21/2000) gkh
268 Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net)
269 Fixed get_serial_by_minor which was all messed up for multi port
270 devices. Fixed multi port problem for generic devices. Now the number
271 of ports is determined by the number of bulk out endpoints for the
272 generic device.
273
274 (01/19/2000) gkh
275 Removed lots of cruft that was around from the old (pre urb) driver
276 interface.
277 Made the serial_table dynamic. This should save lots of memory when
278 the number of minor nodes goes up to 256.
279 Added initial support for devices that have more than one port.
280 Added more debugging comments for the Visor, and added a needed
281 set_configuration call.
282
283 (01/17/2000) gkh
284 Fixed the WhiteHEAT firmware (my processing tool had a bug)
285 and added new debug loader firmware for it.
286 Removed the put_char function as it isn't really needed.
287 Added visor startup commands as found by the Win98 dump.
288
289 (01/13/2000) gkh
290 Fixed the vendor id for the generic driver to the one I meant it to be.
291
292 (01/12/2000) gkh
293 Forget the version numbering...that's pretty useless...
294 Made the driver able to be compiled so that the user can select which
295 converter they want to use. This allows people who only want the Visor
296 support to not pay the memory size price of the WhiteHEAT.
297 Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
298 grabbed the root hub. Not good.
299
300 version 0.4.0 (01/10/2000) gkh
301 Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
302 device. Added startup function to allow firmware to be downloaded to
303 a device if it needs to be.
304 Added firmware download logic to the WhiteHEAT device.
305 Started to add #defines to split up the different drivers for potential
306 configuration option.
307
308 version 0.3.1 (12/30/99) gkh
309 Fixed problems with urb for bulk out.
310 Added initial support for multiple sets of endpoints. This enables
311 the Handspring Visor to be attached successfully. Only the first
312 bulk in / bulk out endpoint pair is being used right now.
313
314 version 0.3.0 (12/27/99) gkh
315 Added initial support for the Handspring Visor based on a patch from
316 Miles Lott (milos@sneety.insync.net)
317 Cleaned up the code a bunch and converted over to using urbs only.
318
319 version 0.2.3 (12/21/99) gkh
320 Added initial support for the Connect Tech WhiteHEAT converter.
321 Incremented the number of ports in expectation of getting the
322 WhiteHEAT to work properly (4 ports per connection).
323 Added notification on insertion and removal of what port the
324 device is/was connected to (and what kind of device it was).
325
326 version 0.2.2 (12/16/99) gkh
327 Changed major number to the new allocated number. We're legal now!
328
329 version 0.2.1 (12/14/99) gkh
330 Fixed bug that happens when device node is opened when there isn't a
331 device attached to it. Thanks to marek@webdesign.no for noticing this.
332
333 version 0.2.0 (11/10/99) gkh
334 Split up internals to make it easier to add different types of serial
335 converters to the code.
336 Added a "generic" driver that gets it's vendor and product id
337 from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net)
338 for the idea and sample code (from the usb scanner driver.)
339 Cleared up any licensing questions by releasing it under the GNU GPL.
340
341 version 0.1.2 (10/25/99) gkh
342 Fixed bug in detecting device.
343
344 version 0.1.1 (10/05/99) gkh
345 Changed the major number to not conflict with anything else.
346
347 version 0.1 (09/28/99) gkh
348 Can recognize the two different devices and start up a read from
349 device when asked to. Writes also work. No control signals yet, this
350 all is vendor specific data (i.e. no spec), also no control for
351 different baud rates or other bit settings.
352 Currently we are using the same devid as the acm driver. This needs
353 to change.
354
355-----------------------------------------------------------------------
356visor.c Change Log comments:
357
358 (06/03/2003) Judd Montgomery <judd at jpilot.org>
359 Added support for module parameter options for untested/unknown
360 devices.
361
362 (03/09/2003) gkh
363 Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl
364 <brachtl@redgrep.cz> for the information.
365
366 (03/05/2003) gkh
367 Think Treo support is now working.
368
369 (04/03/2002) gkh
370 Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI
371 <hiro@zob.ne.jp> for the information.
372
373 (03/27/2002) gkh
374 Removed assumptions that port->tty was always valid (is not true
375 for usb serial console devices.)
376
377 (03/23/2002) gkh
378 Added support for the Palm i705 device, thanks to Thomas Riemer
379 <tom@netmech.com> for the information.
380
381 (03/21/2002) gkh
382 Added support for the Palm m130 device, thanks to Udo Eisenbarth
383 <udo.eisenbarth@web.de> for the information.
384
385 (02/27/2002) gkh
386 Reworked the urb handling logic. We have no more pool, but dynamically
387 allocate the urb and the transfer buffer on the fly. In testing this
388 does not incure any measurable overhead. This also relies on the fact
389 that we have proper reference counting logic for urbs.
390
391 (02/21/2002) SilaS
392 Added initial support for the Palm m515 devices.
393
394 (02/14/2002) gkh
395 Added support for the Clie S-360 device.
396
397 (12/18/2001) gkh
398 Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand
399 for the patch.
400
401 (11/11/2001) gkh
402 Added support for the m125 devices, and added check to prevent oopses
403 for Clié devices that lie about the number of ports they have.
404
405 (08/30/2001) gkh
406 Added support for the Clie devices, both the 3.5 and 4.0 os versions.
407 Many thanks to Daniel Burke, and Bryan Payne for helping with this.
408
409 (08/23/2001) gkh
410 fixed a few potential bugs pointed out by Oliver Neukum.
411
412 (05/30/2001) gkh
413 switched from using spinlock to a semaphore, which fixes lots of problems.
414
415 (05/28/2000) gkh
416 Added initial support for the Palm m500 and Palm m505 devices.
417
418 (04/08/2001) gb
419 Identify version on module load.
420
421 (01/21/2000) gkh
422 Added write_room and chars_in_buffer, as they were previously using the
423 generic driver versions which is all wrong now that we are using an urb
424 pool. Thanks to Wolfgang Grandegger for pointing this out to me.
425 Removed count assignment in the write function, which was not needed anymore
426 either. Thanks to Al Borchers for pointing this out.
427
428 (12/12/2000) gkh
429 Moved MOD_DEC to end of visor_close to be nicer, as the final write
430 message can sleep.
431
432 (11/12/2000) gkh
433 Fixed bug with data being dropped on the floor by forcing tty->low_latency
434 to be on. Hopefully this fixes the OHCI issue!
435
436 (11/01/2000) Adam J. Richter
437 usb_device_id table support
438
439 (10/05/2000) gkh
440 Fixed bug with urb->dev not being set properly, now that the usb
441 core needs it.
442
443 (09/11/2000) gkh
444 Got rid of always calling kmalloc for every urb we wrote out to the
445 device.
446 Added visor_read_callback so we can keep track of bytes in and out for
447 those people who like to know the speed of their device.
448 Removed DEBUG #ifdefs with call to usb_serial_debug_data
449
450 (09/06/2000) gkh
451 Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_
452 the host controller drivers set urb->dev = NULL when the urb is finished.
453
454 (08/28/2000) gkh
455 Added locks for SMP safeness.
456
457 (08/08/2000) gkh
458 Fixed endian problem in visor_startup.
459 Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
460 than once.
461
462 (07/23/2000) gkh
463 Added pool of write urbs to speed up transfers to the visor.
464
465 (07/19/2000) gkh
466 Added module_init and module_exit functions to handle the fact that this
467 driver is a loadable module now.
468
469 (07/03/2000) gkh
470 Added visor_set_ioctl and visor_set_termios functions (they don't do much
471 of anything, but are good for debugging.)
472
473 (06/25/2000) gkh
474 Fixed bug in visor_unthrottle that should help with the disconnect in PPP
475 bug that people have been reporting.
476
477 (06/23/2000) gkh
478 Cleaned up debugging statements in a quest to find UHCI timeout bug.
479
480 (04/27/2000) Ryan VanderBijl
481 Fixed memory leak in visor_close
482
483 (03/26/2000) gkh
484 Split driver up into device specific pieces.
485
486-----------------------------------------------------------------------
487pl2303.c Change Log comments:
488
489 2002_Mar_26 gkh
490 allowed driver to work properly if there is no tty assigned to a port
491 (this happens for serial console devices.)
492
493 2001_Oct_06 gkh
494 Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it.
495
496 2001_Sep_19 gkh
497 Added break support.
498
499 2001_Aug_30 gkh
500 fixed oops in write_bulk_callback.
501
502 2001_Aug_28 gkh
503 reworked buffer logic to be like other usb-serial drivers. Hopefully
504 removing some reported problems.
505
506 2001_Jun_06 gkh
507 finished porting to 2.4 format.
508
509
510-----------------------------------------------------------------------
511io_edgeport.c Change Log comments:
512
513 2003_04_03 al borchers
514 - fixed a bug (that shows up with dosemu) where the tty struct is
515 used in a callback after it has been freed
516
517 2.3 2002_03_08 greg kroah-hartman
518 - fixed bug when multiple devices were attached at the same time.
519
520 2.2 2001_11_14 greg kroah-hartman
521 - fixed bug in edge_close that kept the port from being used more
522 than once.
523 - fixed memory leak on device removal.
524 - fixed potential double free of memory when command urb submitting
525 failed.
526 - other small cleanups when the device is removed
527
528 2.1 2001_07_09 greg kroah-hartman
529 - added support for TIOCMBIS and TIOCMBIC.
530
531 (04/08/2001) gb
532 - Identify version on module load.
533
534 2.0 2001_03_05 greg kroah-hartman
535 - reworked entire driver to fit properly in with the other usb-serial
536 drivers. Occasional oopses still happen, but it's a good start.
537
538 1.2.3 (02/23/2001) greg kroah-hartman
539 - changed device table to work properly for 2.4.x final format.
540 - fixed problem with dropping data at high data rates.
541
542 1.2.2 (11/27/2000) greg kroah-hartman
543 - cleaned up more NTisms.
544 - Added device table for 2.4.0-test11
545
546 1.2.1 (11/08/2000) greg kroah-hartman
547 - Started to clean up NTisms.
548 - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
549
550 1.2 (10/17/2000) David Iacovelli
551 Remove all EPIC code and GPL source
552 Fix RELEVANT_IFLAG macro to include flow control
553 changes port configuration changes.
554 Fix redefinition of SERIAL_MAGIC
555 Change all timeout values to 5 seconds
556 Tried to fix the UHCI multiple urb submission, but failed miserably.
557 it seems to work fine with OHCI.
558 ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
559 find a way to work arount this UHCI bug )
560
561 1.1 (10/11/2000) David Iacovelli
562 Fix XON/XOFF flow control to support both IXON and IXOFF
563
564 0.9.27 (06/30/2000) David Iacovelli
565 Added transmit queue and now allocate urb for command writes.
566
567 0.9.26 (06/29/2000) David Iacovelli
568 Add support for 80251 based edgeport
569
570 0.9.25 (06/27/2000) David Iacovelli
571 Do not close the port if it has multiple opens.
572
573 0.9.24 (05/26/2000) David Iacovelli
574 Add IOCTLs to support RXTX and JAVA POS
575 and first cut at running BlackBox Demo
576
577 0.9.23 (05/24/2000) David Iacovelli
578 Add IOCTLs to support RXTX and JAVA POS
579
580 0.9.22 (05/23/2000) David Iacovelli
581 fixed bug in enumeration. If epconfig turns on mapping by
582 path after a device is already plugged in, we now update
583 the mapping correctly
584
585 0.9.21 (05/16/2000) David Iacovelli
586 Added BlockUntilChaseResp() to also wait for txcredits
587 Updated the way we allocate and handle write URBs
588 Add debug code to dump buffers
589
590 0.9.20 (05/01/2000) David Iacovelli
591 change driver to use usb/tts/
592
593 0.9.19 (05/01/2000) David Iacovelli
594 Update code to compile if DEBUG is off
595
596 0.9.18 (04/28/2000) David Iacovelli
597 cleanup and test tty_register with devfs
598
599 0.9.17 (04/27/2000) greg kroah-hartman
600 changed tty_register around to be like the way it
601 was before, but now it works properly with devfs.
602
603 0.9.16 (04/26/2000) david iacovelli
604 Fixed bug in GetProductInfo()
605
606 0.9.15 (04/25/2000) david iacovelli
607 Updated enumeration
608
609 0.9.14 (04/24/2000) david iacovelli
610 Removed all config/status IOCTLS and
611 converted to using /proc/edgeport
612 still playing with devfs
613
614 0.9.13 (04/24/2000) david iacovelli
615 Removed configuration based on ttyUSB0
616 Added support for configuration using /prod/edgeport
617 first attempt at using devfs (not working yet!)
618 Added IOCTL to GetProductInfo()
619 Added support for custom baud rates
620 Add support for random port numbers
621
622 0.9.12 (04/18/2000) david iacovelli
623 added additional configuration IOCTLs
624 use ttyUSB0 for configuration
625
626 0.9.11 (04/17/2000) greg kroah-hartman
627 fixed module initialization race conditions.
628 made all urbs dynamically allocated.
629 made driver devfs compatible. now it only registers the tty device
630 when the device is actually plugged in.
631
632 0.9.10 (04/13/2000) greg kroah-hartman
633 added proc interface framework.
634
635 0.9.9 (04/13/2000) david iacovelli
636 added enumeration code and ioctls to configure the device
637
638 0.9.8 (04/12/2000) david iacovelli
639 Change interrupt read start when device is plugged in
640 and stop when device is removed
641 process interrupt reads when all ports are closed
642 (keep value of rxBytesAvail consistent with the edgeport)
643 set the USB_BULK_QUEUE flag so that we can shove a bunch
644 of urbs at once down the pipe
645
646 0.9.7 (04/10/2000) david iacovelli
647 start to add enumeration code.
648 generate serial number for epic devices
649 add support for kdb
650
651 0.9.6 (03/30/2000) david iacovelli
652 add IOCTL to get string, manufacture, and boot descriptors
653
654 0.9.5 (03/14/2000) greg kroah-hartman
655 more error checking added to SerialOpen to try to fix UHCI open problem
656
657 0.9.4 (03/09/2000) greg kroah-hartman
658 added more error checking to handle oops when data is hanging
659 around and tty is abruptly closed.
660
661 0.9.3 (03/09/2000) david iacovelli
662 Add epic support for xon/xoff chars
663 play with performance
664
665 0.9.2 (03/08/2000) greg kroah-hartman
666 changed most "info" calls to "dbg"
667 implemented flow control properly in the termios call
668
669 0.9.1 (03/08/2000) david iacovelli
670 added EPIC support
671 enabled bootloader update
672
673 0.9 (03/08/2000) greg kroah-hartman
674 Release to IO networks.
675 Integrated changes that David made
676 made getting urbs for writing SMP safe
677
678 0.8 (03/07/2000) greg kroah-hartman
679 Release to IO networks.
680 Fixed problems that were seen in code by David.
681 Now both Edgeport/4 and Edgeport/2 works properly.
682 Changed most of the functions to use port instead of serial.
683
684 0.7 (02/27/2000) greg kroah-hartman
685 Milestone 3 release.
686 Release to IO Networks
687 ioctl for waiting on line change implemented.
688 ioctl for getting statistics implemented.
689 multiport support working.
690 lsr and msr registers are now handled properly.
691 change break now hooked up and working.
692 support for all known Edgeport devices.
693
694 0.6 (02/22/2000) greg kroah-hartman
695 Release to IO networks.
696 CHASE is implemented correctly when port is closed.
697 SerialOpen now blocks correctly until port is fully opened.
698
699 0.5 (02/20/2000) greg kroah-hartman
700 Release to IO networks.
701 Known problems:
702 modem status register changes are not sent on to the user
703 CHASE is not implemented when the port is closed.
704
705 0.4 (02/16/2000) greg kroah-hartman
706 Second cut at the CeBit demo.
707 Doesn't leak memory on every write to the port
708 Still small leaks on startup.
709 Added support for Edgeport/2 and Edgeport/8
710
711 0.3 (02/15/2000) greg kroah-hartman
712 CeBit demo release.
713 Force the line settings to 4800, 8, 1, e for the demo.
714 Warning! This version leaks memory like crazy!
715
716 0.2 (01/30/2000) greg kroah-hartman
717 Milestone 1 release.
718 Device is found by USB subsystem, enumerated, fimware is downloaded
719 and the descriptors are printed to the debug log, config is set, and
720 green light starts to blink. Open port works, and data can be sent
721 and received at the default settings of the UART. Loopback connector
722 and debug log confirms this.
723
724 0.1 (01/23/2000) greg kroah-hartman
725 Initial release to help IO Networks try to set up their test system.
726 Edgeport4 is recognized, firmware is downloaded, config is set so
727 device blinks green light every 3 sec. Port is bound, but opening,
728 closing, and sending data do not work properly.
729
730
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 9438909e87a5..7b5e8e4ee2bb 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -394,6 +394,15 @@ config USB_SERIAL_MCT_U232
394 To compile this driver as a module, choose M here: the 394 To compile this driver as a module, choose M here: the
395 module will be called mct_u232. 395 module will be called mct_u232.
396 396
397config USB_SERIAL_NOKIA_DKU2
398 tristate "USB Nokia DKU2 Driver"
399 depends on USB_SERIAL
400 help
401 Say Y here if you want to use a Nokia DKU2 device.
402
403 To compile this driver as a module, choose M here: the
404 module will be called nokia_dku2.
405
397config USB_SERIAL_PL2303 406config USB_SERIAL_PL2303
398 tristate "USB Prolific 2303 Single Port Serial Driver" 407 tristate "USB Prolific 2303 Single Port Serial Driver"
399 depends on USB_SERIAL 408 depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 6c7cdcc99a9e..55fd461793b7 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda.o
31obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o 31obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o
32obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o 32obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o
33obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o 33obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o
34obj-$(CONFIG_USB_SERIAL_NOKIA_DKU2) += nokia_dku2.o
34obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o 35obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
35obj-$(CONFIG_USB_SERIAL_OPTION) += option.o 36obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
36obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o 37obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 926d4c2c1600..1f29d8837327 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -30,9 +30,11 @@ static struct usb_driver airprime_driver = {
30 .id_table = id_table, 30 .id_table = id_table,
31}; 31};
32 32
33static struct usb_serial_device_type airprime_device = { 33static struct usb_serial_driver airprime_device = {
34 .owner = THIS_MODULE, 34 .driver = {
35 .name = "airprime", 35 .owner = THIS_MODULE,
36 .name = "airprime",
37 },
36 .id_table = id_table, 38 .id_table = id_table,
37 .num_interrupt_in = NUM_DONT_CARE, 39 .num_interrupt_in = NUM_DONT_CARE,
38 .num_bulk_in = NUM_DONT_CARE, 40 .num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index abb1b2c543bb..84bc0ee4f061 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -121,10 +121,12 @@ static struct usb_driver belkin_driver = {
121}; 121};
122 122
123/* All of the device info needed for the serial converters */ 123/* All of the device info needed for the serial converters */
124static struct usb_serial_device_type belkin_device = { 124static struct usb_serial_driver belkin_device = {
125 .owner = THIS_MODULE, 125 .driver = {
126 .name = "Belkin / Peracom / GoHubs USB Serial Adapter", 126 .owner = THIS_MODULE,
127 .short_name = "belkin", 127 .name = "belkin",
128 },
129 .description = "Belkin / Peracom / GoHubs USB Serial Adapter",
128 .id_table = id_table_combined, 130 .id_table = id_table_combined,
129 .num_interrupt_in = 1, 131 .num_interrupt_in = 1,
130 .num_bulk_in = 1, 132 .num_bulk_in = 1,
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 2f612c2d894b..664139afcfa9 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -18,7 +18,7 @@
18 18
19static int usb_serial_device_match (struct device *dev, struct device_driver *drv) 19static int usb_serial_device_match (struct device *dev, struct device_driver *drv)
20{ 20{
21 struct usb_serial_device_type *driver; 21 struct usb_serial_driver *driver;
22 const struct usb_serial_port *port; 22 const struct usb_serial_port *port;
23 23
24 /* 24 /*
@@ -44,7 +44,7 @@ struct bus_type usb_serial_bus_type = {
44 44
45static int usb_serial_device_probe (struct device *dev) 45static int usb_serial_device_probe (struct device *dev)
46{ 46{
47 struct usb_serial_device_type *driver; 47 struct usb_serial_driver *driver;
48 struct usb_serial_port *port; 48 struct usb_serial_port *port;
49 int retval = 0; 49 int retval = 0;
50 int minor; 50 int minor;
@@ -57,13 +57,13 @@ static int usb_serial_device_probe (struct device *dev)
57 57
58 driver = port->serial->type; 58 driver = port->serial->type;
59 if (driver->port_probe) { 59 if (driver->port_probe) {
60 if (!try_module_get(driver->owner)) { 60 if (!try_module_get(driver->driver.owner)) {
61 dev_err(dev, "module get failed, exiting\n"); 61 dev_err(dev, "module get failed, exiting\n");
62 retval = -EIO; 62 retval = -EIO;
63 goto exit; 63 goto exit;
64 } 64 }
65 retval = driver->port_probe (port); 65 retval = driver->port_probe (port);
66 module_put(driver->owner); 66 module_put(driver->driver.owner);
67 if (retval) 67 if (retval)
68 goto exit; 68 goto exit;
69 } 69 }
@@ -72,7 +72,7 @@ static int usb_serial_device_probe (struct device *dev)
72 tty_register_device (usb_serial_tty_driver, minor, dev); 72 tty_register_device (usb_serial_tty_driver, minor, dev);
73 dev_info(&port->serial->dev->dev, 73 dev_info(&port->serial->dev->dev,
74 "%s converter now attached to ttyUSB%d\n", 74 "%s converter now attached to ttyUSB%d\n",
75 driver->name, minor); 75 driver->description, minor);
76 76
77exit: 77exit:
78 return retval; 78 return retval;
@@ -80,7 +80,7 @@ exit:
80 80
81static int usb_serial_device_remove (struct device *dev) 81static int usb_serial_device_remove (struct device *dev)
82{ 82{
83 struct usb_serial_device_type *driver; 83 struct usb_serial_driver *driver;
84 struct usb_serial_port *port; 84 struct usb_serial_port *port;
85 int retval = 0; 85 int retval = 0;
86 int minor; 86 int minor;
@@ -92,43 +92,38 @@ static int usb_serial_device_remove (struct device *dev)
92 92
93 driver = port->serial->type; 93 driver = port->serial->type;
94 if (driver->port_remove) { 94 if (driver->port_remove) {
95 if (!try_module_get(driver->owner)) { 95 if (!try_module_get(driver->driver.owner)) {
96 dev_err(dev, "module get failed, exiting\n"); 96 dev_err(dev, "module get failed, exiting\n");
97 retval = -EIO; 97 retval = -EIO;
98 goto exit; 98 goto exit;
99 } 99 }
100 retval = driver->port_remove (port); 100 retval = driver->port_remove (port);
101 module_put(driver->owner); 101 module_put(driver->driver.owner);
102 } 102 }
103exit: 103exit:
104 minor = port->number; 104 minor = port->number;
105 tty_unregister_device (usb_serial_tty_driver, minor); 105 tty_unregister_device (usb_serial_tty_driver, minor);
106 dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", 106 dev_info(dev, "%s converter now disconnected from ttyUSB%d\n",
107 driver->name, minor); 107 driver->description, minor);
108 108
109 return retval; 109 return retval;
110} 110}
111 111
112int usb_serial_bus_register(struct usb_serial_device_type *device) 112int usb_serial_bus_register(struct usb_serial_driver *driver)
113{ 113{
114 int retval; 114 int retval;
115 115
116 if (device->short_name) 116 driver->driver.bus = &usb_serial_bus_type;
117 device->driver.name = (char *)device->short_name; 117 driver->driver.probe = usb_serial_device_probe;
118 else 118 driver->driver.remove = usb_serial_device_remove;
119 device->driver.name = (char *)device->name;
120 device->driver.bus = &usb_serial_bus_type;
121 device->driver.probe = usb_serial_device_probe;
122 device->driver.remove = usb_serial_device_remove;
123 device->driver.owner = device->owner;
124 119
125 retval = driver_register(&device->driver); 120 retval = driver_register(&driver->driver);
126 121
127 return retval; 122 return retval;
128} 123}
129 124
130void usb_serial_bus_deregister(struct usb_serial_device_type *device) 125void usb_serial_bus_deregister(struct usb_serial_driver *driver)
131{ 126{
132 driver_unregister (&device->driver); 127 driver_unregister(&driver->driver);
133} 128}
134 129
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 97c78c21e8d1..c5334dd89b12 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -67,15 +67,17 @@ MODULE_DEVICE_TABLE (usb, id_table);
67 67
68static struct usb_driver cp2101_driver = { 68static struct usb_driver cp2101_driver = {
69 .owner = THIS_MODULE, 69 .owner = THIS_MODULE,
70 .name = "CP2101", 70 .name = "cp2101",
71 .probe = usb_serial_probe, 71 .probe = usb_serial_probe,
72 .disconnect = usb_serial_disconnect, 72 .disconnect = usb_serial_disconnect,
73 .id_table = id_table, 73 .id_table = id_table,
74}; 74};
75 75
76static struct usb_serial_device_type cp2101_device = { 76static struct usb_serial_driver cp2101_device = {
77 .owner = THIS_MODULE, 77 .driver = {
78 .name = "CP2101", 78 .owner = THIS_MODULE,
79 .name = "cp2101",
80 },
79 .id_table = id_table, 81 .id_table = id_table,
80 .num_interrupt_in = 0, 82 .num_interrupt_in = 0,
81 .num_bulk_in = 0, 83 .num_bulk_in = 0,
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index b5b431067b08..e581e4ae8483 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -83,10 +83,12 @@ static struct usb_driver cyberjack_driver = {
83 .id_table = id_table, 83 .id_table = id_table,
84}; 84};
85 85
86static struct usb_serial_device_type cyberjack_device = { 86static struct usb_serial_driver cyberjack_device = {
87 .owner = THIS_MODULE, 87 .driver = {
88 .name = "Reiner SCT Cyberjack USB card reader", 88 .owner = THIS_MODULE,
89 .short_name = "cyberjack", 89 .name = "cyberjack",
90 },
91 .description = "Reiner SCT Cyberjack USB card reader",
90 .id_table = id_table, 92 .id_table = id_table,
91 .num_interrupt_in = 1, 93 .num_interrupt_in = 1,
92 .num_bulk_in = 1, 94 .num_bulk_in = 1,
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 9ee1aaff2fcd..af9290ed257b 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -176,10 +176,12 @@ static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf, u
176static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count); 176static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count);
177 177
178 178
179static struct usb_serial_device_type cypress_earthmate_device = { 179static struct usb_serial_driver cypress_earthmate_device = {
180 .owner = THIS_MODULE, 180 .driver = {
181 .name = "DeLorme Earthmate USB", 181 .owner = THIS_MODULE,
182 .short_name = "earthmate", 182 .name = "earthmate",
183 },
184 .description = "DeLorme Earthmate USB",
183 .id_table = id_table_earthmate, 185 .id_table = id_table_earthmate,
184 .num_interrupt_in = 1, 186 .num_interrupt_in = 1,
185 .num_interrupt_out = 1, 187 .num_interrupt_out = 1,
@@ -203,10 +205,12 @@ static struct usb_serial_device_type cypress_earthmate_device = {
203 .write_int_callback = cypress_write_int_callback, 205 .write_int_callback = cypress_write_int_callback,
204}; 206};
205 207
206static struct usb_serial_device_type cypress_hidcom_device = { 208static struct usb_serial_driver cypress_hidcom_device = {
207 .owner = THIS_MODULE, 209 .driver = {
208 .name = "HID->COM RS232 Adapter", 210 .owner = THIS_MODULE,
209 .short_name = "cyphidcom", 211 .name = "cyphidcom",
212 },
213 .description = "HID->COM RS232 Adapter",
210 .id_table = id_table_cyphidcomrs232, 214 .id_table = id_table_cyphidcomrs232,
211 .num_interrupt_in = 1, 215 .num_interrupt_in = 1,
212 .num_interrupt_out = 1, 216 .num_interrupt_out = 1,
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index a19a47f6cf12..dc74644a603d 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -503,10 +503,12 @@ static struct usb_driver digi_driver = {
503 503
504/* device info needed for the Digi serial converter */ 504/* device info needed for the Digi serial converter */
505 505
506static struct usb_serial_device_type digi_acceleport_2_device = { 506static struct usb_serial_driver digi_acceleport_2_device = {
507 .owner = THIS_MODULE, 507 .driver = {
508 .name = "Digi 2 port USB adapter", 508 .owner = THIS_MODULE,
509 .short_name = "digi_2", 509 .name = "digi_2",
510 },
511 .description = "Digi 2 port USB adapter",
510 .id_table = id_table_2, 512 .id_table = id_table_2,
511 .num_interrupt_in = 0, 513 .num_interrupt_in = 0,
512 .num_bulk_in = 4, 514 .num_bulk_in = 4,
@@ -530,10 +532,12 @@ static struct usb_serial_device_type digi_acceleport_2_device = {
530 .shutdown = digi_shutdown, 532 .shutdown = digi_shutdown,
531}; 533};
532 534
533static struct usb_serial_device_type digi_acceleport_4_device = { 535static struct usb_serial_driver digi_acceleport_4_device = {
534 .owner = THIS_MODULE, 536 .driver = {
535 .name = "Digi 4 port USB adapter", 537 .owner = THIS_MODULE,
536 .short_name = "digi_4", 538 .name = "digi_4",
539 },
540 .description = "Digi 4 port USB adapter",
537 .id_table = id_table_4, 541 .id_table = id_table_4,
538 .num_interrupt_in = 0, 542 .num_interrupt_in = 0,
539 .num_bulk_in = 5, 543 .num_bulk_in = 5,
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 8d562ab454a8..0b0546dcc7b9 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -112,9 +112,11 @@ static struct usb_driver empeg_driver = {
112 .id_table = id_table, 112 .id_table = id_table,
113}; 113};
114 114
115static struct usb_serial_device_type empeg_device = { 115static struct usb_serial_driver empeg_device = {
116 .owner = THIS_MODULE, 116 .driver = {
117 .name = "Empeg", 117 .owner = THIS_MODULE,
118 .name = "empeg",
119 },
118 .id_table = id_table, 120 .id_table = id_table,
119 .num_interrupt_in = 0, 121 .num_interrupt_in = 0,
120 .num_bulk_in = 1, 122 .num_bulk_in = 1,
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5a8631c8a4a7..61204bf7cd78 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -411,6 +411,8 @@ static struct usb_device_id id_table_combined [] = {
411 { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) }, 411 { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
412 { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) }, 412 { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
413 { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) }, 413 { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
414 { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
415 { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
414 /* 416 /*
415 * These will probably use user-space drivers. Uncomment them if 417 * These will probably use user-space drivers. Uncomment them if
416 * you need them or use the user-specified vendor/product module 418 * you need them or use the user-specified vendor/product module
@@ -428,7 +430,6 @@ static struct usb_device_id id_table_combined [] = {
428 /* { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, */ 430 /* { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, */
429 /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, */ 431 /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, */
430 /* { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, */ 432 /* { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, */
431 /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, */
432 /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, */ 433 /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, */
433 /* { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, */ 434 /* { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, */
434 /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, */ 435 /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, */
@@ -471,6 +472,9 @@ static struct usb_device_id id_table_combined [] = {
471 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) }, 472 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
472 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) }, 473 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
473 { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, 474 { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
475 { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
476 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
477 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
474 { }, /* Optional parameter entry */ 478 { }, /* Optional parameter entry */
475 { } /* Terminating entry */ 479 { } /* Terminating entry */
476}; 480};
@@ -558,10 +562,12 @@ static unsigned short int ftdi_232am_baud_to_divisor (int baud);
558static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base); 562static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base);
559static __u32 ftdi_232bm_baud_to_divisor (int baud); 563static __u32 ftdi_232bm_baud_to_divisor (int baud);
560 564
561static struct usb_serial_device_type ftdi_sio_device = { 565static struct usb_serial_driver ftdi_sio_device = {
562 .owner = THIS_MODULE, 566 .driver = {
563 .name = "FTDI USB Serial Device", 567 .owner = THIS_MODULE,
564 .short_name = "ftdi_sio", 568 .name = "ftdi_sio",
569 },
570 .description = "FTDI USB Serial Device",
565 .id_table = id_table_combined, 571 .id_table = id_table_combined,
566 .num_interrupt_in = 0, 572 .num_interrupt_in = 0,
567 .num_bulk_in = 1, 573 .num_bulk_in = 1,
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 2c35d74cc6d6..ddb63df31ce6 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -199,6 +199,19 @@
199#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ 199#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
200 200
201/* 201/*
202 * Definitions for Artemis astronomical USB based cameras
203 * Check it at http://www.artemisccd.co.uk/
204 */
205#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */
206
207/*
208 * Definitions for ATIK Instruments astronomical USB based cameras
209 * Check it at http://www.atik-instruments.com/
210 */
211#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Camera */
212#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Camera */
213
214/*
202 * Protego product ids 215 * Protego product ids
203 */ 216 */
204#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ 217#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */
@@ -329,6 +342,9 @@
329#define EVOLUTION_VID 0xDEEE /* Vendor ID */ 342#define EVOLUTION_VID 0xDEEE /* Vendor ID */
330#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ 343#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */
331 344
345/* Pyramid Computer GmbH */
346#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
347
332/* Commands */ 348/* Commands */
333#define FTDI_SIO_RESET 0 /* Reset the port */ 349#define FTDI_SIO_RESET 0 /* Reset the port */
334#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ 350#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 2ef614d5c8f2..35820bda7ae1 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1468,16 +1468,13 @@ static void garmin_shutdown (struct usb_serial *serial)
1468} 1468}
1469 1469
1470 1470
1471
1472
1473
1474
1475
1476/* All of the device info needed */ 1471/* All of the device info needed */
1477static struct usb_serial_device_type garmin_device = { 1472static struct usb_serial_driver garmin_device = {
1478 .owner = THIS_MODULE, 1473 .driver = {
1479 .name = "Garmin GPS usb/tty", 1474 .owner = THIS_MODULE,
1480 .short_name = "garmin_gps", 1475 .name = "garmin_gps",
1476 },
1477 .description = "Garmin GPS usb/tty",
1481 .id_table = id_table, 1478 .id_table = id_table,
1482 .num_interrupt_in = 1, 1479 .num_interrupt_in = 1,
1483 .num_bulk_in = 1, 1480 .num_bulk_in = 1,
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 5f7d3193d355..8909208f506a 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -36,10 +36,11 @@ MODULE_PARM_DESC(product, "User specified USB idProduct");
36static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ 36static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
37 37
38/* All of the device info needed for the Generic Serial Converter */ 38/* All of the device info needed for the Generic Serial Converter */
39struct usb_serial_device_type usb_serial_generic_device = { 39struct usb_serial_driver usb_serial_generic_device = {
40 .owner = THIS_MODULE, 40 .driver = {
41 .name = "Generic", 41 .owner = THIS_MODULE,
42 .short_name = "generic", 42 .name = "generic",
43 },
43 .id_table = generic_device_ids, 44 .id_table = generic_device_ids,
44 .num_interrupt_in = NUM_DONT_CARE, 45 .num_interrupt_in = NUM_DONT_CARE,
45 .num_bulk_in = NUM_DONT_CARE, 46 .num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index 64d55fbd206e..8eadfb705601 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -38,15 +38,17 @@ MODULE_DEVICE_TABLE(usb, id_table);
38 38
39static struct usb_driver hp49gp_driver = { 39static struct usb_driver hp49gp_driver = {
40 .owner = THIS_MODULE, 40 .owner = THIS_MODULE,
41 .name = "HP4X", 41 .name = "hp4X",
42 .probe = usb_serial_probe, 42 .probe = usb_serial_probe,
43 .disconnect = usb_serial_disconnect, 43 .disconnect = usb_serial_disconnect,
44 .id_table = id_table, 44 .id_table = id_table,
45}; 45};
46 46
47static struct usb_serial_device_type hp49gp_device = { 47static struct usb_serial_driver hp49gp_device = {
48 .owner = THIS_MODULE, 48 .driver = {
49 .name = "HP4X", 49 .owner = THIS_MODULE,
50 .name = "hp4X",
51 },
50 .id_table = id_table, 52 .id_table = id_table,
51 .num_interrupt_in = NUM_DONT_CARE, 53 .num_interrupt_in = NUM_DONT_CARE,
52 .num_bulk_in = NUM_DONT_CARE, 54 .num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 04bfe279d763..dc4c498bd1ed 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -27,225 +27,6 @@
27 * Networks technical support, or Peter Berger <pberger@brimson.com>, 27 * Networks technical support, or Peter Berger <pberger@brimson.com>,
28 * or Al Borchers <alborchers@steinerpoint.com>. 28 * or Al Borchers <alborchers@steinerpoint.com>.
29 * 29 *
30 * Version history:
31 *
32 * 2003_04_03 al borchers
33 * - fixed a bug (that shows up with dosemu) where the tty struct is
34 * used in a callback after it has been freed
35 *
36 * 2.3 2002_03_08 greg kroah-hartman
37 * - fixed bug when multiple devices were attached at the same time.
38 *
39 * 2.2 2001_11_14 greg kroah-hartman
40 * - fixed bug in edge_close that kept the port from being used more
41 * than once.
42 * - fixed memory leak on device removal.
43 * - fixed potential double free of memory when command urb submitting
44 * failed.
45 * - other small cleanups when the device is removed
46 *
47 * 2.1 2001_07_09 greg kroah-hartman
48 * - added support for TIOCMBIS and TIOCMBIC.
49 *
50 * (04/08/2001) gb
51 * - Identify version on module load.
52 *
53 * 2.0 2001_03_05 greg kroah-hartman
54 * - reworked entire driver to fit properly in with the other usb-serial
55 * drivers. Occasional oopses still happen, but it's a good start.
56 *
57 * 1.2.3 (02/23/2001) greg kroah-hartman
58 * - changed device table to work properly for 2.4.x final format.
59 * - fixed problem with dropping data at high data rates.
60 *
61 * 1.2.2 (11/27/2000) greg kroah-hartman
62 * - cleaned up more NTisms.
63 * - Added device table for 2.4.0-test11
64 *
65 * 1.2.1 (11/08/2000) greg kroah-hartman
66 * - Started to clean up NTisms.
67 * - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
68 *
69 * 1.2 (10/17/2000) David Iacovelli
70 * Remove all EPIC code and GPL source
71 * Fix RELEVANT_IFLAG macro to include flow control
72 * changes port configuration changes.
73 * Fix redefinition of SERIAL_MAGIC
74 * Change all timeout values to 5 seconds
75 * Tried to fix the UHCI multiple urb submission, but failed miserably.
76 * it seems to work fine with OHCI.
77 * ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
78 * find a way to work arount this UHCI bug )
79 *
80 * 1.1 (10/11/2000) David Iacovelli
81 * Fix XON/XOFF flow control to support both IXON and IXOFF
82 *
83 * 0.9.27 (06/30/2000) David Iacovelli
84 * Added transmit queue and now allocate urb for command writes.
85 *
86 * 0.9.26 (06/29/2000) David Iacovelli
87 * Add support for 80251 based edgeport
88 *
89 * 0.9.25 (06/27/2000) David Iacovelli
90 * Do not close the port if it has multiple opens.
91 *
92 * 0.9.24 (05/26/2000) David Iacovelli
93 * Add IOCTLs to support RXTX and JAVA POS
94 * and first cut at running BlackBox Demo
95 *
96 * 0.9.23 (05/24/2000) David Iacovelli
97 * Add IOCTLs to support RXTX and JAVA POS
98 *
99 * 0.9.22 (05/23/2000) David Iacovelli
100 * fixed bug in enumeration. If epconfig turns on mapping by
101 * path after a device is already plugged in, we now update
102 * the mapping correctly
103 *
104 * 0.9.21 (05/16/2000) David Iacovelli
105 * Added BlockUntilChaseResp() to also wait for txcredits
106 * Updated the way we allocate and handle write URBs
107 * Add debug code to dump buffers
108 *
109 * 0.9.20 (05/01/2000) David Iacovelli
110 * change driver to use usb/tts/
111 *
112 * 0.9.19 (05/01/2000) David Iacovelli
113 * Update code to compile if DEBUG is off
114 *
115 * 0.9.18 (04/28/2000) David Iacovelli
116 * cleanup and test tty_register with devfs
117 *
118 * 0.9.17 (04/27/2000) greg kroah-hartman
119 * changed tty_register around to be like the way it
120 * was before, but now it works properly with devfs.
121 *
122 * 0.9.16 (04/26/2000) david iacovelli
123 * Fixed bug in GetProductInfo()
124 *
125 * 0.9.15 (04/25/2000) david iacovelli
126 * Updated enumeration
127 *
128 * 0.9.14 (04/24/2000) david iacovelli
129 * Removed all config/status IOCTLS and
130 * converted to using /proc/edgeport
131 * still playing with devfs
132 *
133 * 0.9.13 (04/24/2000) david iacovelli
134 * Removed configuration based on ttyUSB0
135 * Added support for configuration using /prod/edgeport
136 * first attempt at using devfs (not working yet!)
137 * Added IOCTL to GetProductInfo()
138 * Added support for custom baud rates
139 * Add support for random port numbers
140 *
141 * 0.9.12 (04/18/2000) david iacovelli
142 * added additional configuration IOCTLs
143 * use ttyUSB0 for configuration
144 *
145 * 0.9.11 (04/17/2000) greg kroah-hartman
146 * fixed module initialization race conditions.
147 * made all urbs dynamically allocated.
148 * made driver devfs compatible. now it only registers the tty device
149 * when the device is actually plugged in.
150 *
151 * 0.9.10 (04/13/2000) greg kroah-hartman
152 * added proc interface framework.
153 *
154 * 0.9.9 (04/13/2000) david iacovelli
155 * added enumeration code and ioctls to configure the device
156 *
157 * 0.9.8 (04/12/2000) david iacovelli
158 * Change interrupt read start when device is plugged in
159 * and stop when device is removed
160 * process interrupt reads when all ports are closed
161 * (keep value of rxBytesAvail consistent with the edgeport)
162 * set the USB_BULK_QUEUE flag so that we can shove a bunch
163 * of urbs at once down the pipe
164 *
165 * 0.9.7 (04/10/2000) david iacovelli
166 * start to add enumeration code.
167 * generate serial number for epic devices
168 * add support for kdb
169 *
170 * 0.9.6 (03/30/2000) david iacovelli
171 * add IOCTL to get string, manufacture, and boot descriptors
172 *
173 * 0.9.5 (03/14/2000) greg kroah-hartman
174 * more error checking added to SerialOpen to try to fix UHCI open problem
175 *
176 * 0.9.4 (03/09/2000) greg kroah-hartman
177 * added more error checking to handle oops when data is hanging
178 * around and tty is abruptly closed.
179 *
180 * 0.9.3 (03/09/2000) david iacovelli
181 * Add epic support for xon/xoff chars
182 * play with performance
183 *
184 * 0.9.2 (03/08/2000) greg kroah-hartman
185 * changed most "info" calls to "dbg"
186 * implemented flow control properly in the termios call
187 *
188 * 0.9.1 (03/08/2000) david iacovelli
189 * added EPIC support
190 * enabled bootloader update
191 *
192 * 0.9 (03/08/2000) greg kroah-hartman
193 * Release to IO networks.
194 * Integrated changes that David made
195 * made getting urbs for writing SMP safe
196 *
197 * 0.8 (03/07/2000) greg kroah-hartman
198 * Release to IO networks.
199 * Fixed problems that were seen in code by David.
200 * Now both Edgeport/4 and Edgeport/2 works properly.
201 * Changed most of the functions to use port instead of serial.
202 *
203 * 0.7 (02/27/2000) greg kroah-hartman
204 * Milestone 3 release.
205 * Release to IO Networks
206 * ioctl for waiting on line change implemented.
207 * ioctl for getting statistics implemented.
208 * multiport support working.
209 * lsr and msr registers are now handled properly.
210 * change break now hooked up and working.
211 * support for all known Edgeport devices.
212 *
213 * 0.6 (02/22/2000) greg kroah-hartman
214 * Release to IO networks.
215 * CHASE is implemented correctly when port is closed.
216 * SerialOpen now blocks correctly until port is fully opened.
217 *
218 * 0.5 (02/20/2000) greg kroah-hartman
219 * Release to IO networks.
220 * Known problems:
221 * modem status register changes are not sent on to the user
222 * CHASE is not implemented when the port is closed.
223 *
224 * 0.4 (02/16/2000) greg kroah-hartman
225 * Second cut at the CeBit demo.
226 * Doesn't leak memory on every write to the port
227 * Still small leaks on startup.
228 * Added support for Edgeport/2 and Edgeport/8
229 *
230 * 0.3 (02/15/2000) greg kroah-hartman
231 * CeBit demo release.
232 * Force the line settings to 4800, 8, 1, e for the demo.
233 * Warning! This version leaks memory like crazy!
234 *
235 * 0.2 (01/30/2000) greg kroah-hartman
236 * Milestone 1 release.
237 * Device is found by USB subsystem, enumerated, fimware is downloaded
238 * and the descriptors are printed to the debug log, config is set, and
239 * green light starts to blink. Open port works, and data can be sent
240 * and received at the default settings of the UART. Loopback connector
241 * and debug log confirms this.
242 *
243 * 0.1 (01/23/2000) greg kroah-hartman
244 * Initial release to help IO Networks try to set up their test system.
245 * Edgeport4 is recognized, firmware is downloaded, config is set so
246 * device blinks green light every 3 sec. Port is bound, but opening,
247 * closing, and sending data do not work properly.
248 *
249 */ 30 */
250 31
251#include <linux/config.h> 32#include <linux/config.h>
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index e7ffe02408bd..fad561c04c76 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -75,10 +75,12 @@ static struct usb_device_id id_table_combined [] = {
75 75
76MODULE_DEVICE_TABLE (usb, id_table_combined); 76MODULE_DEVICE_TABLE (usb, id_table_combined);
77 77
78static struct usb_serial_device_type edgeport_2port_device = { 78static struct usb_serial_driver edgeport_2port_device = {
79 .owner = THIS_MODULE, 79 .driver = {
80 .name = "Edgeport 2 port adapter", 80 .owner = THIS_MODULE,
81 .short_name = "edgeport_2", 81 .name = "edgeport_2",
82 },
83 .description = "Edgeport 2 port adapter",
82 .id_table = edgeport_2port_id_table, 84 .id_table = edgeport_2port_id_table,
83 .num_interrupt_in = 1, 85 .num_interrupt_in = 1,
84 .num_bulk_in = 1, 86 .num_bulk_in = 1,
@@ -103,10 +105,12 @@ static struct usb_serial_device_type edgeport_2port_device = {
103 .write_bulk_callback = edge_bulk_out_data_callback, 105 .write_bulk_callback = edge_bulk_out_data_callback,
104}; 106};
105 107
106static struct usb_serial_device_type edgeport_4port_device = { 108static struct usb_serial_driver edgeport_4port_device = {
107 .owner = THIS_MODULE, 109 .driver = {
108 .name = "Edgeport 4 port adapter", 110 .owner = THIS_MODULE,
109 .short_name = "edgeport_4", 111 .name = "edgeport_4",
112 },
113 .description = "Edgeport 4 port adapter",
110 .id_table = edgeport_4port_id_table, 114 .id_table = edgeport_4port_id_table,
111 .num_interrupt_in = 1, 115 .num_interrupt_in = 1,
112 .num_bulk_in = 1, 116 .num_bulk_in = 1,
@@ -131,10 +135,12 @@ static struct usb_serial_device_type edgeport_4port_device = {
131 .write_bulk_callback = edge_bulk_out_data_callback, 135 .write_bulk_callback = edge_bulk_out_data_callback,
132}; 136};
133 137
134static struct usb_serial_device_type edgeport_8port_device = { 138static struct usb_serial_driver edgeport_8port_device = {
135 .owner = THIS_MODULE, 139 .driver = {
136 .name = "Edgeport 8 port adapter", 140 .owner = THIS_MODULE,
137 .short_name = "edgeport_8", 141 .name = "edgeport_8",
142 },
143 .description = "Edgeport 8 port adapter",
138 .id_table = edgeport_8port_id_table, 144 .id_table = edgeport_8port_id_table,
139 .num_interrupt_in = 1, 145 .num_interrupt_in = 1,
140 .num_bulk_in = 1, 146 .num_bulk_in = 1,
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index ebf9967f7c86..832b6d6734c0 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2982,10 +2982,12 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf,
2982} 2982}
2983 2983
2984 2984
2985static struct usb_serial_device_type edgeport_1port_device = { 2985static struct usb_serial_driver edgeport_1port_device = {
2986 .owner = THIS_MODULE, 2986 .driver = {
2987 .name = "Edgeport TI 1 port adapter", 2987 .owner = THIS_MODULE,
2988 .short_name = "edgeport_ti_1", 2988 .name = "edgeport_ti_1",
2989 },
2990 .description = "Edgeport TI 1 port adapter",
2989 .id_table = edgeport_1port_id_table, 2991 .id_table = edgeport_1port_id_table,
2990 .num_interrupt_in = 1, 2992 .num_interrupt_in = 1,
2991 .num_bulk_in = 1, 2993 .num_bulk_in = 1,
@@ -3010,10 +3012,12 @@ static struct usb_serial_device_type edgeport_1port_device = {
3010 .write_bulk_callback = edge_bulk_out_callback, 3012 .write_bulk_callback = edge_bulk_out_callback,
3011}; 3013};
3012 3014
3013static struct usb_serial_device_type edgeport_2port_device = { 3015static struct usb_serial_driver edgeport_2port_device = {
3014 .owner = THIS_MODULE, 3016 .driver = {
3015 .name = "Edgeport TI 2 port adapter", 3017 .owner = THIS_MODULE,
3016 .short_name = "edgeport_ti_2", 3018 .name = "edgeport_ti_2",
3019 },
3020 .description = "Edgeport TI 2 port adapter",
3017 .id_table = edgeport_2port_id_table, 3021 .id_table = edgeport_2port_id_table,
3018 .num_interrupt_in = 1, 3022 .num_interrupt_in = 1,
3019 .num_bulk_in = 2, 3023 .num_bulk_in = 2,
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index c05c2a2a0f31..d5d066488100 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -92,24 +92,7 @@ static void ipaq_destroy_lists(struct usb_serial_port *port);
92static struct usb_device_id ipaq_id_table [] = { 92static struct usb_device_id ipaq_id_table [] = {
93 /* The first entry is a placeholder for the insmod-specified device */ 93 /* The first entry is a placeholder for the insmod-specified device */
94 { USB_DEVICE(0x049F, 0x0003) }, 94 { USB_DEVICE(0x049F, 0x0003) },
95 { USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */ 95 { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */
96 { USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */
97 { USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */
98 { USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */
99 { USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */
100 { USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */
101 { USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */
102 { USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */
103 { USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */
104 { USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */
105 { USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */
106 { USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */
107 { USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */
108 { USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */
109 { USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */
110 { USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */
111 { USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */
112 { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */
113 { USB_DEVICE(0x03F0, 0x1016) }, /* HP USB Sync */ 96 { USB_DEVICE(0x03F0, 0x1016) }, /* HP USB Sync */
114 { USB_DEVICE(0x03F0, 0x1116) }, /* HP USB Sync 1611 */ 97 { USB_DEVICE(0x03F0, 0x1116) }, /* HP USB Sync 1611 */
115 { USB_DEVICE(0x03F0, 0x1216) }, /* HP USB Sync 1612 */ 98 { USB_DEVICE(0x03F0, 0x1216) }, /* HP USB Sync 1612 */
@@ -125,7 +108,13 @@ static struct usb_device_id ipaq_id_table [] = {
125 { USB_DEVICE(0x03F0, 0x5016) }, /* HP USB Sync 1650 */ 108 { USB_DEVICE(0x03F0, 0x5016) }, /* HP USB Sync 1650 */
126 { USB_DEVICE(0x03F0, 0x5116) }, /* HP USB Sync 1651 */ 109 { USB_DEVICE(0x03F0, 0x5116) }, /* HP USB Sync 1651 */
127 { USB_DEVICE(0x03F0, 0x5216) }, /* HP USB Sync 1652 */ 110 { USB_DEVICE(0x03F0, 0x5216) }, /* HP USB Sync 1652 */
128 { USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */ 111 { USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */
112 { USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */
113 { USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */
114 { USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */
115 { USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */
116 { USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */
117 { USB_DEVICE(0x045E, 0x00CE) }, /* Microsoft USB Sync */
129 { USB_DEVICE(0x045E, 0x0400) }, /* Windows Powered Pocket PC 2002 */ 118 { USB_DEVICE(0x045E, 0x0400) }, /* Windows Powered Pocket PC 2002 */
130 { USB_DEVICE(0x045E, 0x0401) }, /* Windows Powered Pocket PC 2002 */ 119 { USB_DEVICE(0x045E, 0x0401) }, /* Windows Powered Pocket PC 2002 */
131 { USB_DEVICE(0x045E, 0x0402) }, /* Windows Powered Pocket PC 2002 */ 120 { USB_DEVICE(0x045E, 0x0402) }, /* Windows Powered Pocket PC 2002 */
@@ -251,17 +240,81 @@ static struct usb_device_id ipaq_id_table [] = {
251 { USB_DEVICE(0x045E, 0x04E8) }, /* Windows Powered Smartphone 2003 */ 240 { USB_DEVICE(0x045E, 0x04E8) }, /* Windows Powered Smartphone 2003 */
252 { USB_DEVICE(0x045E, 0x04E9) }, /* Windows Powered Smartphone 2003 */ 241 { USB_DEVICE(0x045E, 0x04E9) }, /* Windows Powered Smartphone 2003 */
253 { USB_DEVICE(0x045E, 0x04EA) }, /* Windows Powered Smartphone 2003 */ 242 { USB_DEVICE(0x045E, 0x04EA) }, /* Windows Powered Smartphone 2003 */
254 { USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */ 243 { USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */
255 { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */ 244 { USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */
256 { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */ 245 { USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */
246 { USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */
247 { USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */
248 { USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */
249 { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */
250 { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */
251 { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */
252 { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */
253 { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
254 { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */
255 { USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */
256 { USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */
257 { USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */
258 { USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */
259 { USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */
260 { USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */
261 { USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */
262 { USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */
263 { USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */
264 { USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */
265 { USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */
266 { USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */
267 { USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */
268 { USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */
269 { USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */
270 { USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */
271 { USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */
272 { USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */
273 { USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */
274 { USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */
275 { USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */
276 { USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */
277 { USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */
278 { USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */
279 { USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */
280 { USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */
281 { USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */
282 { USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */
283 { USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */
284 { USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */
285 { USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */
286 { USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */
287 { USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */
288 { USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */
289 { USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */
290 { USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */
291 { USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */
292 { USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */
293 { USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */
294 { USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */
295 { USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */
296 { USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */
257 { USB_DEVICE(0x0930, 0x0700) }, /* TOSHIBA USB Sync 0700 */ 297 { USB_DEVICE(0x0930, 0x0700) }, /* TOSHIBA USB Sync 0700 */
258 { USB_DEVICE(0x0930, 0x0705) }, /* TOSHIBA Pocket PC e310 */ 298 { USB_DEVICE(0x0930, 0x0705) }, /* TOSHIBA Pocket PC e310 */
299 { USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */
259 { USB_DEVICE(0x0930, 0x0707) }, /* TOSHIBA Pocket PC e330 Series */ 300 { USB_DEVICE(0x0930, 0x0707) }, /* TOSHIBA Pocket PC e330 Series */
260 { USB_DEVICE(0x0930, 0x0708) }, /* TOSHIBA Pocket PC e350 Series */ 301 { USB_DEVICE(0x0930, 0x0708) }, /* TOSHIBA Pocket PC e350 Series */
261 { USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */
262 { USB_DEVICE(0x0930, 0x0709) }, /* TOSHIBA Pocket PC e750 Series */ 302 { USB_DEVICE(0x0930, 0x0709) }, /* TOSHIBA Pocket PC e750 Series */
263 { USB_DEVICE(0x0930, 0x070A) }, /* TOSHIBA Pocket PC e400 Series */ 303 { USB_DEVICE(0x0930, 0x070A) }, /* TOSHIBA Pocket PC e400 Series */
264 { USB_DEVICE(0x0930, 0x070B) }, /* TOSHIBA Pocket PC e800 Series */ 304 { USB_DEVICE(0x0930, 0x070B) }, /* TOSHIBA Pocket PC e800 Series */
305 { USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */
306 { USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */
307 { USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */
308 { USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */
309 { USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */
310 { USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */
311 { USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */
312 { USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */
313 { USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */
314 { USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */
315 { USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */
316 { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */
317 { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */
265 { USB_DEVICE(0x0BB4, 0x00CE) }, /* HTC USB Sync */ 318 { USB_DEVICE(0x0BB4, 0x00CE) }, /* HTC USB Sync */
266 { USB_DEVICE(0x0BB4, 0x0A01) }, /* PocketPC USB Sync */ 319 { USB_DEVICE(0x0BB4, 0x0A01) }, /* PocketPC USB Sync */
267 { USB_DEVICE(0x0BB4, 0x0A02) }, /* PocketPC USB Sync */ 320 { USB_DEVICE(0x0BB4, 0x0A02) }, /* PocketPC USB Sync */
@@ -422,116 +475,67 @@ static struct usb_device_id ipaq_id_table [] = {
422 { USB_DEVICE(0x0BB4, 0x0A9D) }, /* SmartPhone USB Sync */ 475 { USB_DEVICE(0x0BB4, 0x0A9D) }, /* SmartPhone USB Sync */
423 { USB_DEVICE(0x0BB4, 0x0A9E) }, /* SmartPhone USB Sync */ 476 { USB_DEVICE(0x0BB4, 0x0A9E) }, /* SmartPhone USB Sync */
424 { USB_DEVICE(0x0BB4, 0x0A9F) }, /* SmartPhone USB Sync */ 477 { USB_DEVICE(0x0BB4, 0x0A9F) }, /* SmartPhone USB Sync */
425 { USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */
426 { USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */
427 { USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */
428 { USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */
429 { USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */
430 { USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */
431 { USB_DEVICE(0x0BF8, 0x1001) }, /* Fujitsu Siemens Computers USB Sync */ 478 { USB_DEVICE(0x0BF8, 0x1001) }, /* Fujitsu Siemens Computers USB Sync */
432 { USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */ 479 { USB_DEVICE(0x0C44, 0x03A2) }, /* Motorola iDEN Smartphone */
433 { USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */
434 { USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */
435 { USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */
436 { USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */
437 { USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */
438 { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */
439 { USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */
440 { USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */
441 { USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */
442 { USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */
443 { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */
444 { USB_DEVICE(0x0C8E, 0x6000) }, /* Cesscom Luxian Series */ 480 { USB_DEVICE(0x0C8E, 0x6000) }, /* Cesscom Luxian Series */
445 { USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */ 481 { USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */
446 { USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */ 482 { USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */
447 { USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */ 483 { USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */
484 { USB_DEVICE(0x0FB8, 0x3001) }, /* Wistron USB Sync */
485 { USB_DEVICE(0x0FB8, 0x3002) }, /* Wistron USB Sync */
486 { USB_DEVICE(0x0FB8, 0x3003) }, /* Wistron USB Sync */
487 { USB_DEVICE(0x0FB8, 0x4001) }, /* Wistron USB Sync */
488 { USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */
448 { USB_DEVICE(0x1066, 0x0300) }, /* E-TEN P3XX Pocket PC */ 489 { USB_DEVICE(0x1066, 0x0300) }, /* E-TEN P3XX Pocket PC */
449 { USB_DEVICE(0x1066, 0x0500) }, /* E-TEN P5XX Pocket PC */ 490 { USB_DEVICE(0x1066, 0x0500) }, /* E-TEN P5XX Pocket PC */
450 { USB_DEVICE(0x1066, 0x0600) }, /* E-TEN P6XX Pocket PC */ 491 { USB_DEVICE(0x1066, 0x0600) }, /* E-TEN P6XX Pocket PC */
451 { USB_DEVICE(0x1066, 0x0700) }, /* E-TEN P7XX Pocket PC */ 492 { USB_DEVICE(0x1066, 0x0700) }, /* E-TEN P7XX Pocket PC */
452 { USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */ 493 { USB_DEVICE(0x1114, 0x0001) }, /* Psion Teklogix Sync 753x */
453 { USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */ 494 { USB_DEVICE(0x1114, 0x0004) }, /* Psion Teklogix Sync netBookPro */
454 { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */ 495 { USB_DEVICE(0x1114, 0x0006) }, /* Psion Teklogix Sync 7525 */
455 { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ 496 { USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */
456 { USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */ 497 { USB_DEVICE(0x11D9, 0x1002) }, /* Rugged Pocket PC 2003 */
457 { USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */ 498 { USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */
458 { USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */ 499 { USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */
459 { USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */ 500 { USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */
460 { USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */ 501 { USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */
461 { USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */ 502 { USB_DEVICE(0x22B8, 0x4204) }, /* Motorola MPx200 Smartphone */
462 { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ 503 { USB_DEVICE(0x22B8, 0x4214) }, /* Motorola MPc GSM */
463 { USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */ 504 { USB_DEVICE(0x22B8, 0x4224) }, /* Motorola MPx220 Smartphone */
464 { USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */ 505 { USB_DEVICE(0x22B8, 0x4234) }, /* Motorola MPc CDMA */
465 { USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */ 506 { USB_DEVICE(0x22B8, 0x4244) }, /* Motorola MPx100 Smartphone */
466 { USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */ 507 { USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */
467 { USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */
468 { USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */
469 { USB_DEVICE(0x3340, 0x0326) }, /* Mio DigiWalker 338 */ 508 { USB_DEVICE(0x3340, 0x0326) }, /* Mio DigiWalker 338 */
470 { USB_DEVICE(0x3340, 0x0426) }, /* Mio DigiWalker 338 */ 509 { USB_DEVICE(0x3340, 0x0426) }, /* Mio DigiWalker 338 */
471 { USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */
472 { USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */
473 { USB_DEVICE(0x3340, 0x043A) }, /* Mio DigiWalker USB Sync */ 510 { USB_DEVICE(0x3340, 0x043A) }, /* Mio DigiWalker USB Sync */
474 { USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */
475 { USB_DEVICE(0x3340, 0x051C) }, /* MiTAC USB Sync 528 */ 511 { USB_DEVICE(0x3340, 0x051C) }, /* MiTAC USB Sync 528 */
476 { USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */ 512 { USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */
513 { USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */
514 { USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */
515 { USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */
516 { USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */
517 { USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */
518 { USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */
477 { USB_DEVICE(0x3340, 0x191C) }, /* YAKUMO USB Sync */ 519 { USB_DEVICE(0x3340, 0x191C) }, /* YAKUMO USB Sync */
520 { USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */
521 { USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */
522 { USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */
523 { USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */
478 { USB_DEVICE(0x4113, 0x0210) }, /* Mobile Media Technology USB Sync */ 524 { USB_DEVICE(0x4113, 0x0210) }, /* Mobile Media Technology USB Sync */
479 { USB_DEVICE(0x4113, 0x0211) }, /* Mobile Media Technology USB Sync */ 525 { USB_DEVICE(0x4113, 0x0211) }, /* Mobile Media Technology USB Sync */
480 { USB_DEVICE(0x4113, 0x0400) }, /* Mobile Media Technology USB Sync */ 526 { USB_DEVICE(0x4113, 0x0400) }, /* Mobile Media Technology USB Sync */
481 { USB_DEVICE(0x4113, 0x0410) }, /* Mobile Media Technology USB Sync */ 527 { USB_DEVICE(0x4113, 0x0410) }, /* Mobile Media Technology USB Sync */
482 { USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */ 528 { USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */
483 { USB_DEVICE(0x0C44, 0x03A2) }, /* Motorola iDEN Smartphone */ 529 { USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */
484 { USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */ 530 { USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */
485 { USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */ 531 { USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */
486 { USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */ 532 { USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */
487 { USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */ 533 { USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */
488 { USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */ 534 { USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */
489 { USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */ 535 { USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */
490 { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ 536 { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */
491 { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
492 { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */
493 { USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */
494 { USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */
495 { USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */
496 { USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */
497 { USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */
498 { USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */ 537 { USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */
499 { USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */ 538 { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */
500 { USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */
501 { USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */
502 { USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */
503 { USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */
504 { USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */
505 { USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */
506 { USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */
507 { USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */
508 { USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */
509 { USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */
510 { USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */
511 { USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */
512 { USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */
513 { USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */
514 { USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */
515 { USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */
516 { USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */
517 { USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */
518 { USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */
519 { USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */
520 { USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */
521 { USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */
522 { USB_DEVICE(0x0FB8, 0x3001) }, /* Wistron USB Sync */
523 { USB_DEVICE(0x0FB8, 0x3002) }, /* Wistron USB Sync */
524 { USB_DEVICE(0x0FB8, 0x3003) }, /* Wistron USB Sync */
525 { USB_DEVICE(0x0FB8, 0x4001) }, /* Wistron USB Sync */
526 { USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */
527 { USB_DEVICE(0x11D9, 0x1002) }, /* Rugged Pocket PC 2003 */
528 { USB_DEVICE(0x22B8, 0x4204) }, /* Motorola MPx200 Smartphone */
529 { USB_DEVICE(0x22B8, 0x4214) }, /* Motorola MPc GSM */
530 { USB_DEVICE(0x22B8, 0x4224) }, /* Motorola MPx220 Smartphone */
531 { USB_DEVICE(0x22B8, 0x4234) }, /* Motorola MPc CDMA */
532 { USB_DEVICE(0x22B8, 0x4244) }, /* Motorola MPx100 Smartphone */
533 { USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */
534 { USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */
535 { } /* Terminating entry */ 539 { } /* Terminating entry */
536}; 540};
537 541
@@ -547,9 +551,12 @@ static struct usb_driver ipaq_driver = {
547 551
548 552
549/* All of the device info needed for the Compaq iPAQ */ 553/* All of the device info needed for the Compaq iPAQ */
550static struct usb_serial_device_type ipaq_device = { 554static struct usb_serial_driver ipaq_device = {
551 .owner = THIS_MODULE, 555 .driver = {
552 .name = "PocketPC PDA", 556 .owner = THIS_MODULE,
557 .name = "ipaq",
558 },
559 .description = "PocketPC PDA",
553 .id_table = ipaq_id_table, 560 .id_table = ipaq_id_table,
554 .num_interrupt_in = NUM_DONT_CARE, 561 .num_interrupt_in = NUM_DONT_CARE,
555 .num_bulk_in = 1, 562 .num_bulk_in = 1,
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 85e242459c27..a02fada85362 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -443,10 +443,12 @@ static int ipw_disconnect(struct usb_serial_port *port)
443 return 0; 443 return 0;
444} 444}
445 445
446static struct usb_serial_device_type ipw_device = { 446static struct usb_serial_driver ipw_device = {
447 .owner = THIS_MODULE, 447 .driver = {
448 .name = "IPWireless converter", 448 .owner = THIS_MODULE,
449 .short_name = "ipw", 449 .name = "ipw",
450 },
451 .description = "IPWireless converter",
450 .id_table = usb_ipw_ids, 452 .id_table = usb_ipw_ids,
451 .num_interrupt_in = NUM_DONT_CARE, 453 .num_interrupt_in = NUM_DONT_CARE,
452 .num_bulk_in = 1, 454 .num_bulk_in = 1,
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 937b2fdd7171..19f329e9bdcf 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -133,9 +133,12 @@ static struct usb_driver ir_driver = {
133}; 133};
134 134
135 135
136static struct usb_serial_device_type ir_device = { 136static struct usb_serial_driver ir_device = {
137 .owner = THIS_MODULE, 137 .driver = {
138 .name = "IR Dongle", 138 .owner = THIS_MODULE,
139 .name = "ir-usb",
140 },
141 .description = "IR Dongle",
139 .id_table = id_table, 142 .id_table = id_table,
140 .num_interrupt_in = 1, 143 .num_interrupt_in = 1,
141 .num_bulk_in = 1, 144 .num_bulk_in = 1,
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index e9b45b768aca..5cfc13b5e56f 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -570,10 +570,12 @@ static struct usb_device_id keyspan_4port_ids[] = {
570}; 570};
571 571
572/* Structs for the devices, pre and post renumeration. */ 572/* Structs for the devices, pre and post renumeration. */
573static struct usb_serial_device_type keyspan_pre_device = { 573static struct usb_serial_driver keyspan_pre_device = {
574 .owner = THIS_MODULE, 574 .driver = {
575 .name = "Keyspan - (without firmware)", 575 .owner = THIS_MODULE,
576 .short_name = "keyspan_no_firm", 576 .name = "keyspan_no_firm",
577 },
578 .description = "Keyspan - (without firmware)",
577 .id_table = keyspan_pre_ids, 579 .id_table = keyspan_pre_ids,
578 .num_interrupt_in = NUM_DONT_CARE, 580 .num_interrupt_in = NUM_DONT_CARE,
579 .num_bulk_in = NUM_DONT_CARE, 581 .num_bulk_in = NUM_DONT_CARE,
@@ -582,10 +584,12 @@ static struct usb_serial_device_type keyspan_pre_device = {
582 .attach = keyspan_fake_startup, 584 .attach = keyspan_fake_startup,
583}; 585};
584 586
585static struct usb_serial_device_type keyspan_1port_device = { 587static struct usb_serial_driver keyspan_1port_device = {
586 .owner = THIS_MODULE, 588 .driver = {
587 .name = "Keyspan 1 port adapter", 589 .owner = THIS_MODULE,
588 .short_name = "keyspan_1", 590 .name = "keyspan_1",
591 },
592 .description = "Keyspan 1 port adapter",
589 .id_table = keyspan_1port_ids, 593 .id_table = keyspan_1port_ids,
590 .num_interrupt_in = NUM_DONT_CARE, 594 .num_interrupt_in = NUM_DONT_CARE,
591 .num_bulk_in = NUM_DONT_CARE, 595 .num_bulk_in = NUM_DONT_CARE,
@@ -607,10 +611,12 @@ static struct usb_serial_device_type keyspan_1port_device = {
607 .shutdown = keyspan_shutdown, 611 .shutdown = keyspan_shutdown,
608}; 612};
609 613
610static struct usb_serial_device_type keyspan_2port_device = { 614static struct usb_serial_driver keyspan_2port_device = {
611 .owner = THIS_MODULE, 615 .driver = {
612 .name = "Keyspan 2 port adapter", 616 .owner = THIS_MODULE,
613 .short_name = "keyspan_2", 617 .name = "keyspan_2",
618 },
619 .description = "Keyspan 2 port adapter",
614 .id_table = keyspan_2port_ids, 620 .id_table = keyspan_2port_ids,
615 .num_interrupt_in = NUM_DONT_CARE, 621 .num_interrupt_in = NUM_DONT_CARE,
616 .num_bulk_in = NUM_DONT_CARE, 622 .num_bulk_in = NUM_DONT_CARE,
@@ -632,10 +638,12 @@ static struct usb_serial_device_type keyspan_2port_device = {
632 .shutdown = keyspan_shutdown, 638 .shutdown = keyspan_shutdown,
633}; 639};
634 640
635static struct usb_serial_device_type keyspan_4port_device = { 641static struct usb_serial_driver keyspan_4port_device = {
636 .owner = THIS_MODULE, 642 .driver = {
637 .name = "Keyspan 4 port adapter", 643 .owner = THIS_MODULE,
638 .short_name = "keyspan_4", 644 .name = "keyspan_4",
645 },
646 .description = "Keyspan 4 port adapter",
639 .id_table = keyspan_4port_ids, 647 .id_table = keyspan_4port_ids,
640 .num_interrupt_in = NUM_DONT_CARE, 648 .num_interrupt_in = NUM_DONT_CARE,
641 .num_bulk_in = 5, 649 .num_bulk_in = 5,
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 635c384cb15a..cd4f48bd83b6 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -783,10 +783,12 @@ static void keyspan_pda_shutdown (struct usb_serial *serial)
783} 783}
784 784
785#ifdef KEYSPAN 785#ifdef KEYSPAN
786static struct usb_serial_device_type keyspan_pda_fake_device = { 786static struct usb_serial_driver keyspan_pda_fake_device = {
787 .owner = THIS_MODULE, 787 .driver = {
788 .name = "Keyspan PDA - (prerenumeration)", 788 .owner = THIS_MODULE,
789 .short_name = "keyspan_pda_pre", 789 .name = "keyspan_pda_pre",
790 },
791 .description = "Keyspan PDA - (prerenumeration)",
790 .id_table = id_table_fake, 792 .id_table = id_table_fake,
791 .num_interrupt_in = NUM_DONT_CARE, 793 .num_interrupt_in = NUM_DONT_CARE,
792 .num_bulk_in = NUM_DONT_CARE, 794 .num_bulk_in = NUM_DONT_CARE,
@@ -797,10 +799,12 @@ static struct usb_serial_device_type keyspan_pda_fake_device = {
797#endif 799#endif
798 800
799#ifdef XIRCOM 801#ifdef XIRCOM
800static struct usb_serial_device_type xircom_pgs_fake_device = { 802static struct usb_serial_driver xircom_pgs_fake_device = {
801 .owner = THIS_MODULE, 803 .driver = {
802 .name = "Xircom / Entregra PGS - (prerenumeration)", 804 .owner = THIS_MODULE,
803 .short_name = "xircom_no_firm", 805 .name = "xircom_no_firm",
806 },
807 .description = "Xircom / Entregra PGS - (prerenumeration)",
804 .id_table = id_table_fake_xircom, 808 .id_table = id_table_fake_xircom,
805 .num_interrupt_in = NUM_DONT_CARE, 809 .num_interrupt_in = NUM_DONT_CARE,
806 .num_bulk_in = NUM_DONT_CARE, 810 .num_bulk_in = NUM_DONT_CARE,
@@ -810,10 +814,12 @@ static struct usb_serial_device_type xircom_pgs_fake_device = {
810}; 814};
811#endif 815#endif
812 816
813static struct usb_serial_device_type keyspan_pda_device = { 817static struct usb_serial_driver keyspan_pda_device = {
814 .owner = THIS_MODULE, 818 .driver = {
815 .name = "Keyspan PDA", 819 .owner = THIS_MODULE,
816 .short_name = "keyspan_pda", 820 .name = "keyspan_pda",
821 },
822 .description = "Keyspan PDA",
817 .id_table = id_table_std, 823 .id_table = id_table_std,
818 .num_interrupt_in = 1, 824 .num_interrupt_in = 1,
819 .num_bulk_in = 0, 825 .num_bulk_in = 0,
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index a11e829e38c8..a8951c0fd020 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -123,10 +123,12 @@ static struct usb_driver kl5kusb105d_driver = {
123 .id_table = id_table, 123 .id_table = id_table,
124}; 124};
125 125
126static struct usb_serial_device_type kl5kusb105d_device = { 126static struct usb_serial_driver kl5kusb105d_device = {
127 .owner = THIS_MODULE, 127 .driver = {
128 .name = "KL5KUSB105D / PalmConnect", 128 .owner = THIS_MODULE,
129 .short_name = "kl5kusb105d", 129 .name = "kl5kusb105d",
130 },
131 .description = "KL5KUSB105D / PalmConnect",
130 .id_table = id_table, 132 .id_table = id_table,
131 .num_interrupt_in = 1, 133 .num_interrupt_in = 1,
132 .num_bulk_in = 1, 134 .num_bulk_in = 1,
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index fe4c98a75171..9456dd9dd136 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -105,9 +105,12 @@ static struct usb_driver kobil_driver = {
105}; 105};
106 106
107 107
108static struct usb_serial_device_type kobil_device = { 108static struct usb_serial_driver kobil_device = {
109 .owner = THIS_MODULE, 109 .driver = {
110 .name = "KOBIL USB smart card terminal", 110 .owner = THIS_MODULE,
111 .name = "kobil",
112 },
113 .description = "KOBIL USB smart card terminal",
111 .id_table = id_table, 114 .id_table = id_table,
112 .num_interrupt_in = NUM_DONT_CARE, 115 .num_interrupt_in = NUM_DONT_CARE,
113 .num_bulk_in = 0, 116 .num_bulk_in = 0,
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 50b6369647d2..ca5dbadb9b7e 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -132,10 +132,12 @@ static struct usb_driver mct_u232_driver = {
132 .id_table = id_table_combined, 132 .id_table = id_table_combined,
133}; 133};
134 134
135static struct usb_serial_device_type mct_u232_device = { 135static struct usb_serial_driver mct_u232_device = {
136 .owner = THIS_MODULE, 136 .driver = {
137 .name = "MCT U232", 137 .owner = THIS_MODULE,
138 .short_name = "mct_u232", 138 .name = "mct_u232",
139 },
140 .description = "MCT U232",
139 .id_table = id_table_combined, 141 .id_table = id_table_combined,
140 .num_interrupt_in = 2, 142 .num_interrupt_in = 2,
141 .num_bulk_in = 0, 143 .num_bulk_in = 0,
diff --git a/drivers/usb/serial/nokia_dku2.c b/drivers/usb/serial/nokia_dku2.c
new file mode 100644
index 000000000000..fad01bef3a64
--- /dev/null
+++ b/drivers/usb/serial/nokia_dku2.c
@@ -0,0 +1,142 @@
1/*
2 * Nokia DKU2 USB driver
3 *
4 * Copyright (C) 2004
5 * Author: C Kemp
6 *
7 * This program is largely derived from work by the linux-usb group
8 * and associated source files. Please see the usb/serial files for
9 * individual credits and copyrights.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * 20.09.2005 - Matthias Blaesing <matthias.blaesing@rwth-aachen.de>
17 * Added short name to device structure to make driver load into kernel 2.6.13
18 *
19 * 20.09.2005 - Matthias Blaesing <matthias.blaesing@rwth-aachen.de>
20 * Added usb_deregister to exit code - to allow remove and reinsert of module
21 */
22
23
24#include <linux/config.h>
25#include <linux/kernel.h>
26#include <linux/errno.h>
27#include <linux/init.h>
28#include <linux/slab.h>
29#include <linux/tty.h>
30#include <linux/tty_driver.h>
31#include <linux/tty_flip.h>
32#include <linux/module.h>
33#include <linux/usb.h>
34#include "usb-serial.h"
35
36
37#define NOKIA_VENDOR_ID 0x0421
38#define NOKIA7600_PRODUCT_ID 0x0400
39#define NOKIA6230_PRODUCT_ID 0x040f
40#define NOKIA6170_PRODUCT_ID 0x0416
41#define NOKIA6670_PRODUCT_ID 0x041d
42#define NOKIA6680_PRODUCT_ID 0x041e
43#define NOKIA6230i_PRODUCT_ID 0x0428
44
45#define NOKIA_AT_PORT 0x82
46#define NOKIA_FBUS_PORT 0x86
47
48/*
49 * Version Information
50 */
51#define DRIVER_VERSION "v0.2"
52#define DRIVER_AUTHOR "C Kemp"
53#define DRIVER_DESC "Nokia DKU2 Driver"
54
55static struct usb_device_id id_table [] = {
56 { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA7600_PRODUCT_ID) },
57 { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230_PRODUCT_ID) },
58 { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6170_PRODUCT_ID) },
59 { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6670_PRODUCT_ID) },
60 { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6680_PRODUCT_ID) },
61 { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230i_PRODUCT_ID) },
62 { } /* Terminating entry */
63};
64MODULE_DEVICE_TABLE(usb, id_table);
65
66/* The only thing which makes this device different from a generic
67 * device is that we have to set an alternative configuration to make
68 * the relevant endpoints available. In 2.6 this is really easy... */
69static int nokia_probe(struct usb_serial *serial,
70 const struct usb_device_id *id)
71{
72 int retval = -ENODEV;
73
74 if (serial->interface->altsetting[0].endpoint[0].desc.bEndpointAddress == NOKIA_AT_PORT) {
75 /* the AT port */
76 dev_info(&serial->dev->dev, "Nokia AT Port:\n");
77 retval = 0;
78 } else if (serial->interface->num_altsetting == 2 &&
79 serial->interface->altsetting[1].endpoint[0].desc.bEndpointAddress == NOKIA_FBUS_PORT) {
80 /* the FBUS port */
81 dev_info(&serial->dev->dev, "Nokia FBUS Port:\n");
82 usb_set_interface(serial->dev, 10, 1);
83 retval = 0;
84 }
85
86 return retval;
87}
88
89static struct usb_driver nokia_driver = {
90 .owner = THIS_MODULE,
91 .name = "nokia_dku2",
92 .probe = usb_serial_probe,
93 .disconnect = usb_serial_disconnect,
94 .id_table = id_table,
95};
96
97static struct usb_serial_driver nokia_serial_driver = {
98 .driver = {
99 .owner = THIS_MODULE,
100 .name = "nokia_dku2",
101 },
102 .description = "Nokia 7600/6230(i)/6170/66x0 DKU2 driver",
103 .id_table = id_table,
104 .num_interrupt_in = 1,
105 .num_bulk_in = 1,
106 .num_bulk_out = 1,
107 .num_ports = 1,
108 .probe = nokia_probe,
109};
110
111static int __init nokia_init(void)
112{
113 int retval;
114
115 retval = usb_serial_register(&nokia_serial_driver);
116 if (retval)
117 return retval;
118
119 retval = usb_register(&nokia_driver);
120 if (retval) {
121 usb_serial_deregister(&nokia_serial_driver);
122 return retval;
123 }
124
125 info(DRIVER_VERSION " " DRIVER_AUTHOR);
126 info(DRIVER_DESC);
127
128 return retval;
129}
130
131static void __exit nokia_exit(void)
132{
133 usb_deregister(&nokia_driver);
134 usb_serial_deregister(&nokia_serial_driver);
135}
136
137module_init(nokia_init);
138module_exit(nokia_exit);
139
140MODULE_AUTHOR(DRIVER_AUTHOR);
141MODULE_DESCRIPTION(DRIVER_DESC);
142MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 6a99ae192df1..3caf97072ac0 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -88,10 +88,12 @@ static struct usb_driver omninet_driver = {
88}; 88};
89 89
90 90
91static struct usb_serial_device_type zyxel_omninet_device = { 91static struct usb_serial_driver zyxel_omninet_device = {
92 .owner = THIS_MODULE, 92 .driver = {
93 .name = "ZyXEL - omni.net lcd plus usb", 93 .owner = THIS_MODULE,
94 .short_name = "omninet", 94 .name = "omninet",
95 },
96 .description = "ZyXEL - omni.net lcd plus usb",
95 .id_table = id_table, 97 .id_table = id_table,
96 .num_interrupt_in = 1, 98 .num_interrupt_in = 1,
97 .num_bulk_in = 1, 99 .num_bulk_in = 1,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 4989e5740d18..7716000045b7 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -105,10 +105,12 @@ static struct usb_driver option_driver = {
105/* The card has three separate interfaces, wich the serial driver 105/* The card has three separate interfaces, wich the serial driver
106 * recognizes separately, thus num_port=1. 106 * recognizes separately, thus num_port=1.
107 */ 107 */
108static struct usb_serial_device_type option_3port_device = { 108static struct usb_serial_driver option_3port_device = {
109 .owner = THIS_MODULE, 109 .driver = {
110 .name = "Option 3G data card", 110 .owner = THIS_MODULE,
111 .short_name = "option", 111 .name = "option",
112 },
113 .description = "Option 3G data card",
112 .id_table = option_ids, 114 .id_table = option_ids,
113 .num_interrupt_in = NUM_DONT_CARE, 115 .num_interrupt_in = NUM_DONT_CARE,
114 .num_bulk_in = NUM_DONT_CARE, 116 .num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 3cf245bdda54..165c119bf10e 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -8,31 +8,10 @@
8 * 8 *
9 * This program is free software; you can redistribute it and/or modify 9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by 10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or 11 * the Free Software Foundation; either version 2 of the License.
12 * (at your option) any later version.
13 * 12 *
14 * See Documentation/usb/usb-serial.txt for more information on using this driver 13 * See Documentation/usb/usb-serial.txt for more information on using this driver
15 * 14 *
16 * 2002_Mar_26 gkh
17 * allowed driver to work properly if there is no tty assigned to a port
18 * (this happens for serial console devices.)
19 *
20 * 2001_Oct_06 gkh
21 * Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it.
22 *
23 * 2001_Sep_19 gkh
24 * Added break support.
25 *
26 * 2001_Aug_30 gkh
27 * fixed oops in write_bulk_callback.
28 *
29 * 2001_Aug_28 gkh
30 * reworked buffer logic to be like other usb-serial drivers. Hopefully
31 * removing some reported problems.
32 *
33 * 2001_Jun_06 gkh
34 * finished porting to 2.4 format.
35 *
36 */ 15 */
37 16
38#include <linux/config.h> 17#include <linux/config.h>
@@ -55,7 +34,6 @@
55/* 34/*
56 * Version Information 35 * Version Information
57 */ 36 */
58#define DRIVER_VERSION "v0.12"
59#define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver" 37#define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver"
60 38
61static int debug; 39static int debug;
@@ -175,9 +153,11 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
175 153
176 154
177/* All of the device info needed for the PL2303 SIO serial converter */ 155/* All of the device info needed for the PL2303 SIO serial converter */
178static struct usb_serial_device_type pl2303_device = { 156static struct usb_serial_driver pl2303_device = {
179 .owner = THIS_MODULE, 157 .driver = {
180 .name = "PL-2303", 158 .owner = THIS_MODULE,
159 .name = "pl2303",
160 },
181 .id_table = id_table, 161 .id_table = id_table,
182 .num_interrupt_in = NUM_DONT_CARE, 162 .num_interrupt_in = NUM_DONT_CARE,
183 .num_bulk_in = 1, 163 .num_bulk_in = 1,
@@ -1195,7 +1175,7 @@ static int __init pl2303_init (void)
1195 retval = usb_register(&pl2303_driver); 1175 retval = usb_register(&pl2303_driver);
1196 if (retval) 1176 if (retval)
1197 goto failed_usb_register; 1177 goto failed_usb_register;
1198 info(DRIVER_DESC " " DRIVER_VERSION); 1178 info(DRIVER_DESC);
1199 return 0; 1179 return 0;
1200failed_usb_register: 1180failed_usb_register:
1201 usb_serial_deregister(&pl2303_device); 1181 usb_serial_deregister(&pl2303_device);
@@ -1215,7 +1195,6 @@ module_init(pl2303_init);
1215module_exit(pl2303_exit); 1195module_exit(pl2303_exit);
1216 1196
1217MODULE_DESCRIPTION(DRIVER_DESC); 1197MODULE_DESCRIPTION(DRIVER_DESC);
1218MODULE_VERSION(DRIVER_VERSION);
1219MODULE_LICENSE("GPL"); 1198MODULE_LICENSE("GPL");
1220 1199
1221module_param(debug, bool, S_IRUGO | S_IWUSR); 1200module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 96a17568cbf1..c22bdc0c4dfd 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -92,7 +92,7 @@ MODULE_DESCRIPTION (DRIVER_DESC);
92MODULE_LICENSE("GPL"); 92MODULE_LICENSE("GPL");
93 93
94#if defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) && !defined(CONFIG_USBD_SAFE_SERIAL_PRODUCT) 94#if defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) && !defined(CONFIG_USBD_SAFE_SERIAL_PRODUCT)
95#abort "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT" 95#error "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT"
96#endif 96#endif
97 97
98#if ! defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) 98#if ! defined(CONFIG_USBD_SAFE_SERIAL_VENDOR)
@@ -397,9 +397,11 @@ static int safe_startup (struct usb_serial *serial)
397 return 0; 397 return 0;
398} 398}
399 399
400static struct usb_serial_device_type safe_device = { 400static struct usb_serial_driver safe_device = {
401 .owner = THIS_MODULE, 401 .driver = {
402 .name = "Safe", 402 .owner = THIS_MODULE,
403 .name = "safe_serial",
404 },
403 .id_table = id_table, 405 .id_table = id_table,
404 .num_interrupt_in = NUM_DONT_CARE, 406 .num_interrupt_in = NUM_DONT_CARE,
405 .num_bulk_in = NUM_DONT_CARE, 407 .num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 59c88de3e7ae..205dbf7201da 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -255,9 +255,12 @@ static struct usb_driver ti_usb_driver = {
255 .id_table = ti_id_table_combined, 255 .id_table = ti_id_table_combined,
256}; 256};
257 257
258static struct usb_serial_device_type ti_1port_device = { 258static struct usb_serial_driver ti_1port_device = {
259 .owner = THIS_MODULE, 259 .driver = {
260 .name = "TI USB 3410 1 port adapter", 260 .owner = THIS_MODULE,
261 .name = "ti_usb_3410_5052_1",
262 },
263 .description = "TI USB 3410 1 port adapter",
261 .id_table = ti_id_table_3410, 264 .id_table = ti_id_table_3410,
262 .num_interrupt_in = 1, 265 .num_interrupt_in = 1,
263 .num_bulk_in = 1, 266 .num_bulk_in = 1,
@@ -282,9 +285,12 @@ static struct usb_serial_device_type ti_1port_device = {
282 .write_bulk_callback = ti_bulk_out_callback, 285 .write_bulk_callback = ti_bulk_out_callback,
283}; 286};
284 287
285static struct usb_serial_device_type ti_2port_device = { 288static struct usb_serial_driver ti_2port_device = {
286 .owner = THIS_MODULE, 289 .driver = {
287 .name = "TI USB 5052 2 port adapter", 290 .owner = THIS_MODULE,
291 .name = "ti_usb_3410_5052_2",
292 },
293 .description = "TI USB 5052 2 port adapter",
288 .id_table = ti_id_table_5052, 294 .id_table = ti_id_table_5052,
289 .num_interrupt_in = 1, 295 .num_interrupt_in = 1,
290 .num_bulk_in = 2, 296 .num_bulk_in = 2,
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index e77fbdfc782d..0c4881d18cd5 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1,7 +1,7 @@
1/* 1/*
2 * USB Serial Converter driver 2 * USB Serial Converter driver
3 * 3 *
4 * Copyright (C) 1999 - 2004 Greg Kroah-Hartman (greg@kroah.com) 4 * Copyright (C) 1999 - 2005 Greg Kroah-Hartman (greg@kroah.com)
5 * Copyright (C) 2000 Peter Berger (pberger@brimson.com) 5 * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
6 * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com) 6 * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
7 * 7 *
@@ -9,316 +9,11 @@
9 * modify it under the terms of the GNU General Public License version 9 * modify it under the terms of the GNU General Public License version
10 * 2 as published by the Free Software Foundation. 10 * 2 as published by the Free Software Foundation.
11 * 11 *
12 * This driver was originally based on the ACM driver by Armin Fuerst (which was 12 * This driver was originally based on the ACM driver by Armin Fuerst (which was
13 * based on a driver by Brad Keryan) 13 * based on a driver by Brad Keryan)
14 * 14 *
15 * See Documentation/usb/usb-serial.txt for more information on using this driver 15 * See Documentation/usb/usb-serial.txt for more information on using this driver
16 * 16 *
17 * (12/10/2002) gkh
18 * Split the ports off into their own struct device, and added a
19 * usb-serial bus driver.
20 *
21 * (11/19/2002) gkh
22 * removed a few #ifdefs for the generic code and cleaned up the failure
23 * logic in initialization.
24 *
25 * (10/02/2002) gkh
26 * moved the console code to console.c and out of this file.
27 *
28 * (06/05/2002) gkh
29 * moved location of startup() call in serial_probe() until after all
30 * of the port information and endpoints are initialized. This makes
31 * things easier for some drivers.
32 *
33 * (04/10/2002) gkh
34 * added serial_read_proc function which creates a
35 * /proc/tty/driver/usb-serial file.
36 *
37 * (03/27/2002) gkh
38 * Got USB serial console code working properly and merged into the main
39 * version of the tree. Thanks to Randy Dunlap for the initial version
40 * of this code, and for pushing me to finish it up.
41 * The USB serial console works with any usb serial driver device.
42 *
43 * (03/21/2002) gkh
44 * Moved all manipulation of port->open_count into the core. Now the
45 * individual driver's open and close functions are called only when the
46 * first open() and last close() is called. Making the drivers a bit
47 * smaller and simpler.
48 * Fixed a bug if a driver didn't have the owner field set.
49 *
50 * (02/26/2002) gkh
51 * Moved all locking into the main serial_* functions, instead of having
52 * the individual drivers have to grab the port semaphore. This should
53 * reduce races.
54 * Reworked the MOD_INC logic a bit to always increment and decrement, even
55 * if the generic driver is being used.
56 *
57 * (10/10/2001) gkh
58 * usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
59 * help prevent child drivers from accessing the device since it is now
60 * gone.
61 *
62 * (09/13/2001) gkh
63 * Moved generic driver initialize after we have registered with the USB
64 * core. Thanks to Randy Dunlap for pointing this problem out.
65 *
66 * (07/03/2001) gkh
67 * Fixed module paramater size. Thanks to John Brockmeyer for the pointer.
68 * Fixed vendor and product getting defined through the MODULE_PARM macro
69 * if the Generic driver wasn't compiled in.
70 * Fixed problem with generic_shutdown() not being called for drivers that
71 * don't have a shutdown() function.
72 *
73 * (06/06/2001) gkh
74 * added evil hack that is needed for the prolific pl2303 device due to the
75 * crazy way its endpoints are set up.
76 *
77 * (05/30/2001) gkh
78 * switched from using spinlock to a semaphore, which fixes lots of problems.
79 *
80 * (04/08/2001) gb
81 * Identify version on module load.
82 *
83 * 2001_02_05 gkh
84 * Fixed buffer overflows bug with the generic serial driver. Thanks to
85 * Todd Squires <squirest@ct0.com> for fixing this.
86 *
87 * (01/10/2001) gkh
88 * Fixed bug where the generic serial adaptor grabbed _any_ device that was
89 * offered to it.
90 *
91 * (12/12/2000) gkh
92 * Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
93 * moved them to the serial_open and serial_close functions.
94 * Also fixed bug with there not being a MOD_DEC for the generic driver
95 * (thanks to Gary Brubaker for finding this.)
96 *
97 * (11/29/2000) gkh
98 * Small NULL pointer initialization cleanup which saves a bit of disk image
99 *
100 * (11/01/2000) Adam J. Richter
101 * instead of using idVendor/idProduct pairs, usb serial drivers
102 * now identify their hardware interest with usb_device_id tables,
103 * which they usually have anyhow for use with MODULE_DEVICE_TABLE.
104 *
105 * (10/05/2000) gkh
106 * Fixed bug with urb->dev not being set properly, now that the usb
107 * core needs it.
108 *
109 * (09/11/2000) gkh
110 * Removed DEBUG #ifdefs with call to usb_serial_debug_data
111 *
112 * (08/28/2000) gkh
113 * Added port_lock to port structure.
114 * Added locks for SMP safeness to generic driver
115 * Fixed the ability to open a generic device's port more than once.
116 *
117 * (07/23/2000) gkh
118 * Added bulk_out_endpointAddress to port structure.
119 *
120 * (07/19/2000) gkh, pberger, and borchers
121 * Modifications to allow usb-serial drivers to be modules.
122 *
123 * (07/03/2000) gkh
124 * Added more debugging to serial_ioctl call
125 *
126 * (06/25/2000) gkh
127 * Changed generic_write_bulk_callback to not call wake_up_interruptible
128 * directly, but to have port_softint do it at a safer time.
129 *
130 * (06/23/2000) gkh
131 * Cleaned up debugging statements in a quest to find UHCI timeout bug.
132 *
133 * (05/22/2000) gkh
134 * Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
135 * removed from the individual device source files.
136 *
137 * (05/03/2000) gkh
138 * Added the Digi Acceleport driver from Al Borchers and Peter Berger.
139 *
140 * (05/02/2000) gkh
141 * Changed devfs and tty register code to work properly now. This was based on
142 * the ACM driver changes by Vojtech Pavlik.
143 *
144 * (04/27/2000) Ryan VanderBijl
145 * Put calls to *_paranoia_checks into one function.
146 *
147 * (04/23/2000) gkh
148 * Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports.
149 * Moved when the startup code printed out the devices that are supported.
150 *
151 * (04/19/2000) gkh
152 * Added driver for ZyXEL omni.net lcd plus ISDN TA
153 * Made startup info message specify which drivers were compiled in.
154 *
155 * (04/03/2000) gkh
156 * Changed the probe process to remove the module unload races.
157 * Changed where the tty layer gets initialized to have devfs work nicer.
158 * Added initial devfs support.
159 *
160 * (03/26/2000) gkh
161 * Split driver up into device specific pieces.
162 *
163 * (03/19/2000) gkh
164 * Fixed oops that could happen when device was removed while a program
165 * was talking to the device.
166 * Removed the static urbs and now all urbs are created and destroyed
167 * dynamically.
168 * Reworked the internal interface. Now everything is based on the
169 * usb_serial_port structure instead of the larger usb_serial structure.
170 * This fixes the bug that a multiport device could not have more than
171 * one port open at one time.
172 *
173 * (03/17/2000) gkh
174 * Added config option for debugging messages.
175 * Added patch for keyspan pda from Brian Warner.
176 *
177 * (03/06/2000) gkh
178 * Added the keyspan pda code from Brian Warner <warner@lothar.com>
179 * Moved a bunch of the port specific stuff into its own structure. This
180 * is in anticipation of the true multiport devices (there's a bug if you
181 * try to access more than one port of any multiport device right now)
182 *
183 * (02/21/2000) gkh
184 * Made it so that any serial devices only have to specify which functions
185 * they want to overload from the generic function calls (great,
186 * inheritance in C, in a driver, just what I wanted...)
187 * Added support for set_termios and ioctl function calls. No drivers take
188 * advantage of this yet.
189 * Removed the #ifdef MODULE, now there is no module specific code.
190 * Cleaned up a few comments in usb-serial.h that were wrong (thanks again
191 * to Miles Lott).
192 * Small fix to get_free_serial.
193 *
194 * (02/14/2000) gkh
195 * Removed the Belkin and Peracom functionality from the driver due to
196 * the lack of support from the vendor, and me not wanting people to
197 * accidenatly buy the device, expecting it to work with Linux.
198 * Added read_bulk_callback and write_bulk_callback to the type structure
199 * for the needs of the FTDI and WhiteHEAT driver.
200 * Changed all reverences to FTDI to FTDI_SIO at the request of Bill
201 * Ryder.
202 * Changed the output urb size back to the max endpoint size to make
203 * the ftdi_sio driver have it easier, and due to the fact that it didn't
204 * really increase the speed any.
205 *
206 * (02/11/2000) gkh
207 * Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
208 * patch from Miles Lott (milos@insync.net).
209 * Fixed bug with not restoring the minor range that a device grabs, if
210 * the startup function fails (thanks Miles for finding this).
211 *
212 * (02/05/2000) gkh
213 * Added initial framework for the Keyspan PDA serial converter so that
214 * Brian Warner has a place to put his code.
215 * Made the ezusb specific functions generic enough that different
216 * devices can use them (whiteheat and keyspan_pda both need them).
217 * Split out a whole bunch of structure and other stuff to a separate
218 * usb-serial.h file.
219 * Made the Visor connection messages a little more understandable, now
220 * that Miles Lott (milos@insync.net) has gotten the Generic channel to
221 * work. Also made them always show up in the log file.
222 *
223 * (01/25/2000) gkh
224 * Added initial framework for FTDI serial converter so that Bill Ryder
225 * has a place to put his code.
226 * Added the vendor specific info from Handspring. Now we can print out
227 * informational debug messages as well as understand what is happening.
228 *
229 * (01/23/2000) gkh
230 * Fixed problem of crash when trying to open a port that didn't have a
231 * device assigned to it. Made the minor node finding a little smarter,
232 * now it looks to find a continuous space for the new device.
233 *
234 * (01/21/2000) gkh
235 * Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net)
236 * Fixed get_serial_by_minor which was all messed up for multi port
237 * devices. Fixed multi port problem for generic devices. Now the number
238 * of ports is determined by the number of bulk out endpoints for the
239 * generic device.
240 *
241 * (01/19/2000) gkh
242 * Removed lots of cruft that was around from the old (pre urb) driver
243 * interface.
244 * Made the serial_table dynamic. This should save lots of memory when
245 * the number of minor nodes goes up to 256.
246 * Added initial support for devices that have more than one port.
247 * Added more debugging comments for the Visor, and added a needed
248 * set_configuration call.
249 *
250 * (01/17/2000) gkh
251 * Fixed the WhiteHEAT firmware (my processing tool had a bug)
252 * and added new debug loader firmware for it.
253 * Removed the put_char function as it isn't really needed.
254 * Added visor startup commands as found by the Win98 dump.
255 *
256 * (01/13/2000) gkh
257 * Fixed the vendor id for the generic driver to the one I meant it to be.
258 *
259 * (01/12/2000) gkh
260 * Forget the version numbering...that's pretty useless...
261 * Made the driver able to be compiled so that the user can select which
262 * converter they want to use. This allows people who only want the Visor
263 * support to not pay the memory size price of the WhiteHEAT.
264 * Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
265 * grabbed the root hub. Not good.
266 *
267 * version 0.4.0 (01/10/2000) gkh
268 * Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
269 * device. Added startup function to allow firmware to be downloaded to
270 * a device if it needs to be.
271 * Added firmware download logic to the WhiteHEAT device.
272 * Started to add #defines to split up the different drivers for potential
273 * configuration option.
274 *
275 * version 0.3.1 (12/30/99) gkh
276 * Fixed problems with urb for bulk out.
277 * Added initial support for multiple sets of endpoints. This enables
278 * the Handspring Visor to be attached successfully. Only the first
279 * bulk in / bulk out endpoint pair is being used right now.
280 *
281 * version 0.3.0 (12/27/99) gkh
282 * Added initial support for the Handspring Visor based on a patch from
283 * Miles Lott (milos@sneety.insync.net)
284 * Cleaned up the code a bunch and converted over to using urbs only.
285 *
286 * version 0.2.3 (12/21/99) gkh
287 * Added initial support for the Connect Tech WhiteHEAT converter.
288 * Incremented the number of ports in expectation of getting the
289 * WhiteHEAT to work properly (4 ports per connection).
290 * Added notification on insertion and removal of what port the
291 * device is/was connected to (and what kind of device it was).
292 *
293 * version 0.2.2 (12/16/99) gkh
294 * Changed major number to the new allocated number. We're legal now!
295 *
296 * version 0.2.1 (12/14/99) gkh
297 * Fixed bug that happens when device node is opened when there isn't a
298 * device attached to it. Thanks to marek@webdesign.no for noticing this.
299 *
300 * version 0.2.0 (11/10/99) gkh
301 * Split up internals to make it easier to add different types of serial
302 * converters to the code.
303 * Added a "generic" driver that gets it's vendor and product id
304 * from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net)
305 * for the idea and sample code (from the usb scanner driver.)
306 * Cleared up any licensing questions by releasing it under the GNU GPL.
307 *
308 * version 0.1.2 (10/25/99) gkh
309 * Fixed bug in detecting device.
310 *
311 * version 0.1.1 (10/05/99) gkh
312 * Changed the major number to not conflict with anything else.
313 *
314 * version 0.1 (09/28/99) gkh
315 * Can recognize the two different devices and start up a read from
316 * device when asked to. Writes also work. No control signals yet, this
317 * all is vendor specific data (i.e. no spec), also no control for
318 * different baud rates or other bit settings.
319 * Currently we are using the same devid as the acm driver. This needs
320 * to change.
321 *
322 */ 17 */
323 18
324#include <linux/config.h> 19#include <linux/config.h>
@@ -342,7 +37,6 @@
342/* 37/*
343 * Version Information 38 * Version Information
344 */ 39 */
345#define DRIVER_VERSION "v2.0"
346#define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/" 40#define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
347#define DRIVER_DESC "USB Serial Driver core" 41#define DRIVER_DESC "USB Serial Driver core"
348 42
@@ -427,7 +121,7 @@ static void destroy_serial(struct kref *kref)
427 121
428 serial = to_usb_serial(kref); 122 serial = to_usb_serial(kref);
429 123
430 dbg ("%s - %s", __FUNCTION__, serial->type->name); 124 dbg("%s - %s", __FUNCTION__, serial->type->description);
431 125
432 serial->type->shutdown(serial); 126 serial->type->shutdown(serial);
433 127
@@ -507,7 +201,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
507 /* lock this module before we call it 201 /* lock this module before we call it
508 * this may fail, which means we must bail out, 202 * this may fail, which means we must bail out,
509 * safe because we are called with BKL held */ 203 * safe because we are called with BKL held */
510 if (!try_module_get(serial->type->owner)) { 204 if (!try_module_get(serial->type->driver.owner)) {
511 retval = -ENODEV; 205 retval = -ENODEV;
512 goto bailout_kref_put; 206 goto bailout_kref_put;
513 } 207 }
@@ -522,7 +216,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
522 return 0; 216 return 0;
523 217
524bailout_module_put: 218bailout_module_put:
525 module_put(serial->type->owner); 219 module_put(serial->type->driver.owner);
526bailout_kref_put: 220bailout_kref_put:
527 kref_put(&serial->kref, destroy_serial); 221 kref_put(&serial->kref, destroy_serial);
528 port->open_count = 0; 222 port->open_count = 0;
@@ -553,7 +247,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
553 port->tty = NULL; 247 port->tty = NULL;
554 } 248 }
555 249
556 module_put(port->serial->type->owner); 250 module_put(port->serial->type->driver.owner);
557 } 251 }
558 252
559 kref_put(&port->serial->kref, destroy_serial); 253 kref_put(&port->serial->kref, destroy_serial);
@@ -711,16 +405,16 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int
711 char tmp[40]; 405 char tmp[40];
712 406
713 dbg("%s", __FUNCTION__); 407 dbg("%s", __FUNCTION__);
714 length += sprintf (page, "usbserinfo:1.0 driver:%s\n", DRIVER_VERSION); 408 length += sprintf (page, "usbserinfo:1.0 driver:2.0\n");
715 for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) { 409 for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) {
716 serial = usb_serial_get_by_index(i); 410 serial = usb_serial_get_by_index(i);
717 if (serial == NULL) 411 if (serial == NULL)
718 continue; 412 continue;
719 413
720 length += sprintf (page+length, "%d:", i); 414 length += sprintf (page+length, "%d:", i);
721 if (serial->type->owner) 415 if (serial->type->driver.owner)
722 length += sprintf (page+length, " module:%s", module_name(serial->type->owner)); 416 length += sprintf (page+length, " module:%s", module_name(serial->type->driver.owner));
723 length += sprintf (page+length, " name:\"%s\"", serial->type->name); 417 length += sprintf (page+length, " name:\"%s\"", serial->type->description);
724 length += sprintf (page+length, " vendor:%04x product:%04x", 418 length += sprintf (page+length, " vendor:%04x product:%04x",
725 le16_to_cpu(serial->dev->descriptor.idVendor), 419 le16_to_cpu(serial->dev->descriptor.idVendor),
726 le16_to_cpu(serial->dev->descriptor.idProduct)); 420 le16_to_cpu(serial->dev->descriptor.idProduct));
@@ -823,7 +517,7 @@ static void port_release(struct device *dev)
823 517
824static struct usb_serial * create_serial (struct usb_device *dev, 518static struct usb_serial * create_serial (struct usb_device *dev,
825 struct usb_interface *interface, 519 struct usb_interface *interface,
826 struct usb_serial_device_type *type) 520 struct usb_serial_driver *driver)
827{ 521{
828 struct usb_serial *serial; 522 struct usb_serial *serial;
829 523
@@ -834,22 +528,22 @@ static struct usb_serial * create_serial (struct usb_device *dev,
834 } 528 }
835 memset (serial, 0, sizeof(*serial)); 529 memset (serial, 0, sizeof(*serial));
836 serial->dev = usb_get_dev(dev); 530 serial->dev = usb_get_dev(dev);
837 serial->type = type; 531 serial->type = driver;
838 serial->interface = interface; 532 serial->interface = interface;
839 kref_init(&serial->kref); 533 kref_init(&serial->kref);
840 534
841 return serial; 535 return serial;
842} 536}
843 537
844static struct usb_serial_device_type *search_serial_device(struct usb_interface *iface) 538static struct usb_serial_driver *search_serial_device(struct usb_interface *iface)
845{ 539{
846 struct list_head *p; 540 struct list_head *p;
847 const struct usb_device_id *id; 541 const struct usb_device_id *id;
848 struct usb_serial_device_type *t; 542 struct usb_serial_driver *t;
849 543
850 /* List trough know devices and see if the usb id matches */ 544 /* List trough know devices and see if the usb id matches */
851 list_for_each(p, &usb_serial_driver_list) { 545 list_for_each(p, &usb_serial_driver_list) {
852 t = list_entry(p, struct usb_serial_device_type, driver_list); 546 t = list_entry(p, struct usb_serial_driver, driver_list);
853 id = usb_match_id(iface, t->id_table); 547 id = usb_match_id(iface, t->id_table);
854 if (id != NULL) { 548 if (id != NULL) {
855 dbg("descriptor matches"); 549 dbg("descriptor matches");
@@ -872,7 +566,7 @@ int usb_serial_probe(struct usb_interface *interface,
872 struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS]; 566 struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS];
873 struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS]; 567 struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS];
874 struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS]; 568 struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
875 struct usb_serial_device_type *type = NULL; 569 struct usb_serial_driver *type = NULL;
876 int retval; 570 int retval;
877 int minor; 571 int minor;
878 int buffer_size; 572 int buffer_size;
@@ -900,7 +594,7 @@ int usb_serial_probe(struct usb_interface *interface,
900 if (type->probe) { 594 if (type->probe) {
901 const struct usb_device_id *id; 595 const struct usb_device_id *id;
902 596
903 if (!try_module_get(type->owner)) { 597 if (!try_module_get(type->driver.owner)) {
904 dev_err(&interface->dev, "module get failed, exiting\n"); 598 dev_err(&interface->dev, "module get failed, exiting\n");
905 kfree (serial); 599 kfree (serial);
906 return -EIO; 600 return -EIO;
@@ -908,7 +602,7 @@ int usb_serial_probe(struct usb_interface *interface,
908 602
909 id = usb_match_id(interface, type->id_table); 603 id = usb_match_id(interface, type->id_table);
910 retval = type->probe(serial, id); 604 retval = type->probe(serial, id);
911 module_put(type->owner); 605 module_put(type->driver.owner);
912 606
913 if (retval) { 607 if (retval) {
914 dbg ("sub driver rejected device"); 608 dbg ("sub driver rejected device");
@@ -992,7 +686,7 @@ int usb_serial_probe(struct usb_interface *interface,
992#endif 686#endif
993 687
994 /* found all that we need */ 688 /* found all that we need */
995 dev_info(&interface->dev, "%s converter detected\n", type->name); 689 dev_info(&interface->dev, "%s converter detected\n", type->description);
996 690
997#ifdef CONFIG_USB_SERIAL_GENERIC 691#ifdef CONFIG_USB_SERIAL_GENERIC
998 if (type == &usb_serial_generic_device) { 692 if (type == &usb_serial_generic_device) {
@@ -1007,13 +701,13 @@ int usb_serial_probe(struct usb_interface *interface,
1007 if (!num_ports) { 701 if (!num_ports) {
1008 /* if this device type has a calc_num_ports function, call it */ 702 /* if this device type has a calc_num_ports function, call it */
1009 if (type->calc_num_ports) { 703 if (type->calc_num_ports) {
1010 if (!try_module_get(type->owner)) { 704 if (!try_module_get(type->driver.owner)) {
1011 dev_err(&interface->dev, "module get failed, exiting\n"); 705 dev_err(&interface->dev, "module get failed, exiting\n");
1012 kfree (serial); 706 kfree (serial);
1013 return -EIO; 707 return -EIO;
1014 } 708 }
1015 num_ports = type->calc_num_ports (serial); 709 num_ports = type->calc_num_ports (serial);
1016 module_put(type->owner); 710 module_put(type->driver.owner);
1017 } 711 }
1018 if (!num_ports) 712 if (!num_ports)
1019 num_ports = type->num_ports; 713 num_ports = type->num_ports;
@@ -1158,12 +852,12 @@ int usb_serial_probe(struct usb_interface *interface,
1158 852
1159 /* if this device type has an attach function, call it */ 853 /* if this device type has an attach function, call it */
1160 if (type->attach) { 854 if (type->attach) {
1161 if (!try_module_get(type->owner)) { 855 if (!try_module_get(type->driver.owner)) {
1162 dev_err(&interface->dev, "module get failed, exiting\n"); 856 dev_err(&interface->dev, "module get failed, exiting\n");
1163 goto probe_error; 857 goto probe_error;
1164 } 858 }
1165 retval = type->attach (serial); 859 retval = type->attach (serial);
1166 module_put(type->owner); 860 module_put(type->driver.owner);
1167 if (retval < 0) 861 if (retval < 0)
1168 goto probe_error; 862 goto probe_error;
1169 if (retval > 0) { 863 if (retval > 0) {
@@ -1330,7 +1024,7 @@ static int __init usb_serial_init(void)
1330 goto exit_generic; 1024 goto exit_generic;
1331 } 1025 }
1332 1026
1333 info(DRIVER_DESC " " DRIVER_VERSION); 1027 info(DRIVER_DESC);
1334 1028
1335 return result; 1029 return result;
1336 1030
@@ -1375,7 +1069,7 @@ module_exit(usb_serial_exit);
1375 } \ 1069 } \
1376 } while (0) 1070 } while (0)
1377 1071
1378static void fixup_generic(struct usb_serial_device_type *device) 1072static void fixup_generic(struct usb_serial_driver *device)
1379{ 1073{
1380 set_to_generic_if_null(device, open); 1074 set_to_generic_if_null(device, open);
1381 set_to_generic_if_null(device, write); 1075 set_to_generic_if_null(device, write);
@@ -1387,30 +1081,33 @@ static void fixup_generic(struct usb_serial_device_type *device)
1387 set_to_generic_if_null(device, shutdown); 1081 set_to_generic_if_null(device, shutdown);
1388} 1082}
1389 1083
1390int usb_serial_register(struct usb_serial_device_type *new_device) 1084int usb_serial_register(struct usb_serial_driver *driver)
1391{ 1085{
1392 int retval; 1086 int retval;
1393 1087
1394 fixup_generic(new_device); 1088 fixup_generic(driver);
1089
1090 if (!driver->description)
1091 driver->description = driver->driver.name;
1395 1092
1396 /* Add this device to our list of devices */ 1093 /* Add this device to our list of devices */
1397 list_add(&new_device->driver_list, &usb_serial_driver_list); 1094 list_add(&driver->driver_list, &usb_serial_driver_list);
1398 1095
1399 retval = usb_serial_bus_register(new_device); 1096 retval = usb_serial_bus_register(driver);
1400 if (retval) { 1097 if (retval) {
1401 err("problem %d when registering driver %s", retval, new_device->name); 1098 err("problem %d when registering driver %s", retval, driver->description);
1402 list_del(&new_device->driver_list); 1099 list_del(&driver->driver_list);
1403 } 1100 }
1404 else 1101 else
1405 info("USB Serial support registered for %s", new_device->name); 1102 info("USB Serial support registered for %s", driver->description);
1406 1103
1407 return retval; 1104 return retval;
1408} 1105}
1409 1106
1410 1107
1411void usb_serial_deregister(struct usb_serial_device_type *device) 1108void usb_serial_deregister(struct usb_serial_driver *device)
1412{ 1109{
1413 info("USB Serial deregistering driver %s", device->name); 1110 info("USB Serial deregistering driver %s", device->description);
1414 list_del(&device->driver_list); 1111 list_del(&device->driver_list);
1415 usb_serial_bus_deregister(device); 1112 usb_serial_bus_deregister(device);
1416} 1113}
@@ -1429,7 +1126,6 @@ EXPORT_SYMBOL_GPL(usb_serial_port_softint);
1429/* Module information */ 1126/* Module information */
1430MODULE_AUTHOR( DRIVER_AUTHOR ); 1127MODULE_AUTHOR( DRIVER_AUTHOR );
1431MODULE_DESCRIPTION( DRIVER_DESC ); 1128MODULE_DESCRIPTION( DRIVER_DESC );
1432MODULE_VERSION( DRIVER_VERSION );
1433MODULE_LICENSE("GPL"); 1129MODULE_LICENSE("GPL");
1434 1130
1435module_param(debug, bool, S_IRUGO | S_IWUSR); 1131module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h
index 57f92f054c75..238a5a871ed6 100644
--- a/drivers/usb/serial/usb-serial.h
+++ b/drivers/usb/serial/usb-serial.h
@@ -1,53 +1,13 @@
1/* 1/*
2 * USB Serial Converter driver 2 * USB Serial Converter driver
3 * 3 *
4 * Copyright (C) 1999 - 2004 4 * Copyright (C) 1999 - 2005
5 * Greg Kroah-Hartman (greg@kroah.com) 5 * Greg Kroah-Hartman (greg@kroah.com)
6 * 6 *
7 * This program is free software; you can redistribute it and/or modify 7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by 8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or 9 * the Free Software Foundation; either version 2 of the License.
10 * (at your option) any later version.
11 * 10 *
12 * See Documentation/usb/usb-serial.txt for more information on using this driver
13 *
14 * (03/26/2002) gkh
15 * removed the port->tty check from port_paranoia_check() due to serial
16 * consoles not having a tty device assigned to them.
17 *
18 * (12/03/2001) gkh
19 * removed active from the port structure.
20 * added documentation to the usb_serial_device_type structure
21 *
22 * (10/10/2001) gkh
23 * added vendor and product to serial structure. Needed to determine device
24 * owner when the device is disconnected.
25 *
26 * (05/30/2001) gkh
27 * added sem to port structure and removed port_lock
28 *
29 * (10/05/2000) gkh
30 * Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
31 * fix bug with urb->dev not being set properly, now that the usb core
32 * needs it.
33 *
34 * (09/11/2000) gkh
35 * Added usb_serial_debug_data function to help get rid of #DEBUG in the
36 * drivers.
37 *
38 * (08/28/2000) gkh
39 * Added port_lock to port structure.
40 *
41 * (08/08/2000) gkh
42 * Added open_count to port structure.
43 *
44 * (07/23/2000) gkh
45 * Added bulk_out_endpointAddress to port structure.
46 *
47 * (07/19/2000) gkh, pberger, and borchers
48 * Modifications to allow usb-serial drivers to be modules.
49 *
50 *
51 */ 11 */
52 12
53 13
@@ -143,7 +103,7 @@ static inline void usb_set_serial_port_data (struct usb_serial_port *port, void
143/** 103/**
144 * usb_serial - structure used by the usb-serial core for a device 104 * usb_serial - structure used by the usb-serial core for a device
145 * @dev: pointer to the struct usb_device for this device 105 * @dev: pointer to the struct usb_device for this device
146 * @type: pointer to the struct usb_serial_device_type for this device 106 * @type: pointer to the struct usb_serial_driver for this device
147 * @interface: pointer to the struct usb_interface for this device 107 * @interface: pointer to the struct usb_interface for this device
148 * @minor: the starting minor number for this device 108 * @minor: the starting minor number for this device
149 * @num_ports: the number of ports this device has 109 * @num_ports: the number of ports this device has
@@ -159,7 +119,7 @@ static inline void usb_set_serial_port_data (struct usb_serial_port *port, void
159 */ 119 */
160struct usb_serial { 120struct usb_serial {
161 struct usb_device * dev; 121 struct usb_device * dev;
162 struct usb_serial_device_type * type; 122 struct usb_serial_driver * type;
163 struct usb_interface * interface; 123 struct usb_interface * interface;
164 unsigned char minor; 124 unsigned char minor;
165 unsigned char num_ports; 125 unsigned char num_ports;
@@ -188,13 +148,9 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
188} 148}
189 149
190/** 150/**
191 * usb_serial_device_type - a structure that defines a usb serial device 151 * usb_serial_driver - describes a usb serial driver
192 * @owner: pointer to the module that owns this device. 152 * @description: pointer to a string that describes this driver. This string used
193 * @name: pointer to a string that describes this device. This string used
194 * in the syslog messages when a device is inserted or removed. 153 * in the syslog messages when a device is inserted or removed.
195 * @short_name: a pointer to a string that describes this device in
196 * KOBJ_NAME_LEN characters or less. This is used for the sysfs interface
197 * to describe the driver.
198 * @id_table: pointer to a list of usb_device_id structures that define all 154 * @id_table: pointer to a list of usb_device_id structures that define all
199 * of the devices this structure can support. 155 * of the devices this structure can support.
200 * @num_interrupt_in: the number of interrupt in endpoints this device will 156 * @num_interrupt_in: the number of interrupt in endpoints this device will
@@ -221,16 +177,19 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
221 * @shutdown: pointer to the driver's shutdown function. This will be 177 * @shutdown: pointer to the driver's shutdown function. This will be
222 * called when the device is removed from the system. 178 * called when the device is removed from the system.
223 * 179 *
224 * This structure is defines a USB Serial device. It provides all of 180 * This structure is defines a USB Serial driver. It provides all of
225 * the information that the USB serial core code needs. If the function 181 * the information that the USB serial core code needs. If the function
226 * pointers are defined, then the USB serial core code will call them when 182 * pointers are defined, then the USB serial core code will call them when
227 * the corresponding tty port functions are called. If they are not 183 * the corresponding tty port functions are called. If they are not
228 * called, the generic serial function will be used instead. 184 * called, the generic serial function will be used instead.
185 *
186 * The driver.owner field should be set to the module owner of this driver.
187 * The driver.name field should be set to the name of this driver (remember
188 * it will show up in sysfs, so it needs to be short and to the point.
189 * Useing the module name is a good idea.)
229 */ 190 */
230struct usb_serial_device_type { 191struct usb_serial_driver {
231 struct module *owner; 192 const char *description;
232 char *name;
233 char *short_name;
234 const struct usb_device_id *id_table; 193 const struct usb_device_id *id_table;
235 char num_interrupt_in; 194 char num_interrupt_in;
236 char num_interrupt_out; 195 char num_interrupt_out;
@@ -269,10 +228,10 @@ struct usb_serial_device_type {
269 void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs); 228 void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs);
270 void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs); 229 void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs);
271}; 230};
272#define to_usb_serial_driver(d) container_of(d, struct usb_serial_device_type, driver) 231#define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver)
273 232
274extern int usb_serial_register(struct usb_serial_device_type *new_device); 233extern int usb_serial_register(struct usb_serial_driver *driver);
275extern void usb_serial_deregister(struct usb_serial_device_type *device); 234extern void usb_serial_deregister(struct usb_serial_driver *driver);
276extern void usb_serial_port_softint(void *private); 235extern void usb_serial_port_softint(void *private);
277 236
278extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id); 237extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id);
@@ -303,10 +262,10 @@ extern void usb_serial_generic_shutdown (struct usb_serial *serial);
303extern int usb_serial_generic_register (int debug); 262extern int usb_serial_generic_register (int debug);
304extern void usb_serial_generic_deregister (void); 263extern void usb_serial_generic_deregister (void);
305 264
306extern int usb_serial_bus_register (struct usb_serial_device_type *device); 265extern int usb_serial_bus_register (struct usb_serial_driver *device);
307extern void usb_serial_bus_deregister (struct usb_serial_device_type *device); 266extern void usb_serial_bus_deregister (struct usb_serial_driver *device);
308 267
309extern struct usb_serial_device_type usb_serial_generic_device; 268extern struct usb_serial_driver usb_serial_generic_device;
310extern struct bus_type usb_serial_bus_type; 269extern struct bus_type usb_serial_bus_type;
311extern struct tty_driver *usb_serial_tty_driver; 270extern struct tty_driver *usb_serial_tty_driver;
312 271
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 31c57adcb623..a473c1c34559 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -7,139 +7,10 @@
7 * 7 *
8 * This program is free software; you can redistribute it and/or modify 8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by 9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or 10 * the Free Software Foundation; either version 2 of the License.
11 * (at your option) any later version.
12 * 11 *
13 * See Documentation/usb/usb-serial.txt for more information on using this driver 12 * See Documentation/usb/usb-serial.txt for more information on using this driver
14 * 13 *
15 * (06/03/2003) Judd Montgomery <judd at jpilot.org>
16 * Added support for module parameter options for untested/unknown
17 * devices.
18 *
19 * (03/09/2003) gkh
20 * Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl
21 * <brachtl@redgrep.cz> for the information.
22 *
23 * (03/05/2003) gkh
24 * Think Treo support is now working.
25 *
26 * (04/03/2002) gkh
27 * Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI
28 * <hiro@zob.ne.jp> for the information.
29 *
30 * (03/27/2002) gkh
31 * Removed assumptions that port->tty was always valid (is not true
32 * for usb serial console devices.)
33 *
34 * (03/23/2002) gkh
35 * Added support for the Palm i705 device, thanks to Thomas Riemer
36 * <tom@netmech.com> for the information.
37 *
38 * (03/21/2002) gkh
39 * Added support for the Palm m130 device, thanks to Udo Eisenbarth
40 * <udo.eisenbarth@web.de> for the information.
41 *
42 * (02/27/2002) gkh
43 * Reworked the urb handling logic. We have no more pool, but dynamically
44 * allocate the urb and the transfer buffer on the fly. In testing this
45 * does not incure any measurable overhead. This also relies on the fact
46 * that we have proper reference counting logic for urbs.
47 *
48 * (02/21/2002) SilaS
49 * Added initial support for the Palm m515 devices.
50 *
51 * (02/14/2002) gkh
52 * Added support for the Clie S-360 device.
53 *
54 * (12/18/2001) gkh
55 * Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand
56 * for the patch.
57 *
58 * (11/11/2001) gkh
59 * Added support for the m125 devices, and added check to prevent oopses
60 * for Clié devices that lie about the number of ports they have.
61 *
62 * (08/30/2001) gkh
63 * Added support for the Clie devices, both the 3.5 and 4.0 os versions.
64 * Many thanks to Daniel Burke, and Bryan Payne for helping with this.
65 *
66 * (08/23/2001) gkh
67 * fixed a few potential bugs pointed out by Oliver Neukum.
68 *
69 * (05/30/2001) gkh
70 * switched from using spinlock to a semaphore, which fixes lots of problems.
71 *
72 * (05/28/2000) gkh
73 * Added initial support for the Palm m500 and Palm m505 devices.
74 *
75 * (04/08/2001) gb
76 * Identify version on module load.
77 *
78 * (01/21/2000) gkh
79 * Added write_room and chars_in_buffer, as they were previously using the
80 * generic driver versions which is all wrong now that we are using an urb
81 * pool. Thanks to Wolfgang Grandegger for pointing this out to me.
82 * Removed count assignment in the write function, which was not needed anymore
83 * either. Thanks to Al Borchers for pointing this out.
84 *
85 * (12/12/2000) gkh
86 * Moved MOD_DEC to end of visor_close to be nicer, as the final write
87 * message can sleep.
88 *
89 * (11/12/2000) gkh
90 * Fixed bug with data being dropped on the floor by forcing tty->low_latency
91 * to be on. Hopefully this fixes the OHCI issue!
92 *
93 * (11/01/2000) Adam J. Richter
94 * usb_device_id table support
95 *
96 * (10/05/2000) gkh
97 * Fixed bug with urb->dev not being set properly, now that the usb
98 * core needs it.
99 *
100 * (09/11/2000) gkh
101 * Got rid of always calling kmalloc for every urb we wrote out to the
102 * device.
103 * Added visor_read_callback so we can keep track of bytes in and out for
104 * those people who like to know the speed of their device.
105 * Removed DEBUG #ifdefs with call to usb_serial_debug_data
106 *
107 * (09/06/2000) gkh
108 * Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_
109 * the host controller drivers set urb->dev = NULL when the urb is finished.
110 *
111 * (08/28/2000) gkh
112 * Added locks for SMP safeness.
113 *
114 * (08/08/2000) gkh
115 * Fixed endian problem in visor_startup.
116 * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
117 * than once.
118 *
119 * (07/23/2000) gkh
120 * Added pool of write urbs to speed up transfers to the visor.
121 *
122 * (07/19/2000) gkh
123 * Added module_init and module_exit functions to handle the fact that this
124 * driver is a loadable module now.
125 *
126 * (07/03/2000) gkh
127 * Added visor_set_ioctl and visor_set_termios functions (they don't do much
128 * of anything, but are good for debugging.)
129 *
130 * (06/25/2000) gkh
131 * Fixed bug in visor_unthrottle that should help with the disconnect in PPP
132 * bug that people have been reporting.
133 *
134 * (06/23/2000) gkh
135 * Cleaned up debugging statements in a quest to find UHCI timeout bug.
136 *
137 * (04/27/2000) Ryan VanderBijl
138 * Fixed memory leak in visor_close
139 *
140 * (03/26/2000) gkh
141 * Split driver up into device specific pieces.
142 *
143 */ 14 */
144 15
145#include <linux/config.h> 16#include <linux/config.h>
@@ -161,7 +32,6 @@
161/* 32/*
162 * Version Information 33 * Version Information
163 */ 34 */
164#define DRIVER_VERSION "v2.1"
165#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>" 35#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
166#define DRIVER_DESC "USB HandSpring Visor / Palm OS driver" 36#define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
167 37
@@ -311,10 +181,12 @@ static struct usb_driver visor_driver = {
311}; 181};
312 182
313/* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ 183/* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */
314static struct usb_serial_device_type handspring_device = { 184static struct usb_serial_driver handspring_device = {
315 .owner = THIS_MODULE, 185 .driver = {
316 .name = "Handspring Visor / Palm OS", 186 .owner = THIS_MODULE,
317 .short_name = "visor", 187 .name = "visor",
188 },
189 .description = "Handspring Visor / Palm OS",
318 .id_table = id_table, 190 .id_table = id_table,
319 .num_interrupt_in = NUM_DONT_CARE, 191 .num_interrupt_in = NUM_DONT_CARE,
320 .num_bulk_in = 2, 192 .num_bulk_in = 2,
@@ -339,10 +211,12 @@ static struct usb_serial_device_type handspring_device = {
339}; 211};
340 212
341/* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */ 213/* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */
342static struct usb_serial_device_type clie_5_device = { 214static struct usb_serial_driver clie_5_device = {
343 .owner = THIS_MODULE, 215 .driver = {
344 .name = "Sony Clie 5.0", 216 .owner = THIS_MODULE,
345 .short_name = "clie_5", 217 .name = "clie_5",
218 },
219 .description = "Sony Clie 5.0",
346 .id_table = clie_id_5_table, 220 .id_table = clie_id_5_table,
347 .num_interrupt_in = NUM_DONT_CARE, 221 .num_interrupt_in = NUM_DONT_CARE,
348 .num_bulk_in = 2, 222 .num_bulk_in = 2,
@@ -367,10 +241,12 @@ static struct usb_serial_device_type clie_5_device = {
367}; 241};
368 242
369/* device info for the Sony Clie OS version 3.5 */ 243/* device info for the Sony Clie OS version 3.5 */
370static struct usb_serial_device_type clie_3_5_device = { 244static struct usb_serial_driver clie_3_5_device = {
371 .owner = THIS_MODULE, 245 .driver = {
372 .name = "Sony Clie 3.5", 246 .owner = THIS_MODULE,
373 .short_name = "clie_3.5", 247 .name = "clie_3.5",
248 },
249 .description = "Sony Clie 3.5",
374 .id_table = clie_id_3_5_table, 250 .id_table = clie_id_3_5_table,
375 .num_interrupt_in = 0, 251 .num_interrupt_in = 0,
376 .num_bulk_in = 1, 252 .num_bulk_in = 1,
@@ -782,7 +658,7 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i
782 break; 658 break;
783 } 659 }
784 dev_info(dev, "%s: port %d, is for %s use\n", 660 dev_info(dev, "%s: port %d, is for %s use\n",
785 serial->type->name, 661 serial->type->description,
786 connection_info->connections[i].port, string); 662 connection_info->connections[i].port, string);
787 } 663 }
788 } 664 }
@@ -791,11 +667,11 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i
791 */ 667 */
792 if (num_ports == 0 || num_ports > 2) { 668 if (num_ports == 0 || num_ports > 2) {
793 dev_warn (dev, "%s: No valid connect info available\n", 669 dev_warn (dev, "%s: No valid connect info available\n",
794 serial->type->name); 670 serial->type->description);
795 num_ports = 2; 671 num_ports = 2;
796 } 672 }
797 673
798 dev_info(dev, "%s: Number of ports: %d\n", serial->type->name, 674 dev_info(dev, "%s: Number of ports: %d\n", serial->type->description,
799 num_ports); 675 num_ports);
800 676
801 /* 677 /*
@@ -1125,7 +1001,7 @@ static int __init visor_init (void)
1125 retval = usb_register(&visor_driver); 1001 retval = usb_register(&visor_driver);
1126 if (retval) 1002 if (retval)
1127 goto failed_usb_register; 1003 goto failed_usb_register;
1128 info(DRIVER_DESC " " DRIVER_VERSION); 1004 info(DRIVER_DESC);
1129 1005
1130 return 0; 1006 return 0;
1131failed_usb_register: 1007failed_usb_register:
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index cf3bc30675a1..18c3183be769 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -156,10 +156,12 @@ static void whiteheat_unthrottle (struct usb_serial_port *port);
156static void whiteheat_read_callback (struct urb *urb, struct pt_regs *regs); 156static void whiteheat_read_callback (struct urb *urb, struct pt_regs *regs);
157static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs); 157static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs);
158 158
159static struct usb_serial_device_type whiteheat_fake_device = { 159static struct usb_serial_driver whiteheat_fake_device = {
160 .owner = THIS_MODULE, 160 .driver = {
161 .name = "Connect Tech - WhiteHEAT - (prerenumeration)", 161 .owner = THIS_MODULE,
162 .short_name = "whiteheatnofirm", 162 .name = "whiteheatnofirm",
163 },
164 .description = "Connect Tech - WhiteHEAT - (prerenumeration)",
163 .id_table = id_table_prerenumeration, 165 .id_table = id_table_prerenumeration,
164 .num_interrupt_in = NUM_DONT_CARE, 166 .num_interrupt_in = NUM_DONT_CARE,
165 .num_bulk_in = NUM_DONT_CARE, 167 .num_bulk_in = NUM_DONT_CARE,
@@ -169,10 +171,12 @@ static struct usb_serial_device_type whiteheat_fake_device = {
169 .attach = whiteheat_firmware_attach, 171 .attach = whiteheat_firmware_attach,
170}; 172};
171 173
172static struct usb_serial_device_type whiteheat_device = { 174static struct usb_serial_driver whiteheat_device = {
173 .owner = THIS_MODULE, 175 .driver = {
174 .name = "Connect Tech - WhiteHEAT", 176 .owner = THIS_MODULE,
175 .short_name = "whiteheat", 177 .name = "whiteheat",
178 },
179 .description = "Connect Tech - WhiteHEAT",
176 .id_table = id_table_std, 180 .id_table = id_table_std,
177 .num_interrupt_in = NUM_DONT_CARE, 181 .num_interrupt_in = NUM_DONT_CARE,
178 .num_bulk_in = NUM_DONT_CARE, 182 .num_bulk_in = NUM_DONT_CARE,
@@ -382,10 +386,10 @@ static int whiteheat_attach (struct usb_serial *serial)
382 usb_clear_halt(serial->dev, pipe); 386 usb_clear_halt(serial->dev, pipe);
383 ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS); 387 ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS);
384 if (ret) { 388 if (ret) {
385 err("%s: Couldn't send command [%d]", serial->type->name, ret); 389 err("%s: Couldn't send command [%d]", serial->type->description, ret);
386 goto no_firmware; 390 goto no_firmware;
387 } else if (alen != sizeof(command)) { 391 } else if (alen != sizeof(command)) {
388 err("%s: Send command incomplete [%d]", serial->type->name, alen); 392 err("%s: Send command incomplete [%d]", serial->type->description, alen);
389 goto no_firmware; 393 goto no_firmware;
390 } 394 }
391 395
@@ -394,19 +398,19 @@ static int whiteheat_attach (struct usb_serial *serial)
394 usb_clear_halt(serial->dev, pipe); 398 usb_clear_halt(serial->dev, pipe);
395 ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); 399 ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
396 if (ret) { 400 if (ret) {
397 err("%s: Couldn't get results [%d]", serial->type->name, ret); 401 err("%s: Couldn't get results [%d]", serial->type->description, ret);
398 goto no_firmware; 402 goto no_firmware;
399 } else if (alen != sizeof(result)) { 403 } else if (alen != sizeof(result)) {
400 err("%s: Get results incomplete [%d]", serial->type->name, alen); 404 err("%s: Get results incomplete [%d]", serial->type->description, alen);
401 goto no_firmware; 405 goto no_firmware;
402 } else if (result[0] != command[0]) { 406 } else if (result[0] != command[0]) {
403 err("%s: Command failed [%d]", serial->type->name, result[0]); 407 err("%s: Command failed [%d]", serial->type->description, result[0]);
404 goto no_firmware; 408 goto no_firmware;
405 } 409 }
406 410
407 hw_info = (struct whiteheat_hw_info *)&result[1]; 411 hw_info = (struct whiteheat_hw_info *)&result[1];
408 412
409 info("%s: Driver %s: Firmware v%d.%02d", serial->type->name, 413 info("%s: Driver %s: Firmware v%d.%02d", serial->type->description,
410 DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev); 414 DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev);
411 415
412 for (i = 0; i < serial->num_ports; i++) { 416 for (i = 0; i < serial->num_ports; i++) {
@@ -414,7 +418,7 @@ static int whiteheat_attach (struct usb_serial *serial)
414 418
415 info = (struct whiteheat_private *)kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); 419 info = (struct whiteheat_private *)kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
416 if (info == NULL) { 420 if (info == NULL) {
417 err("%s: Out of memory for port structures\n", serial->type->name); 421 err("%s: Out of memory for port structures\n", serial->type->description);
418 goto no_private; 422 goto no_private;
419 } 423 }
420 424
@@ -484,7 +488,7 @@ static int whiteheat_attach (struct usb_serial *serial)
484 488
485 command_info = (struct whiteheat_command_private *)kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); 489 command_info = (struct whiteheat_command_private *)kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL);
486 if (command_info == NULL) { 490 if (command_info == NULL) {
487 err("%s: Out of memory for port structures\n", serial->type->name); 491 err("%s: Out of memory for port structures\n", serial->type->description);
488 goto no_command_private; 492 goto no_command_private;
489 } 493 }
490 494
@@ -501,9 +505,9 @@ static int whiteheat_attach (struct usb_serial *serial)
501 505
502no_firmware: 506no_firmware:
503 /* Firmware likely not running */ 507 /* Firmware likely not running */
504 err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->name); 508 err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description);
505 err("%s: If the firmware is not running (status led not blinking)\n", serial->type->name); 509 err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description);
506 err("%s: please contact support@connecttech.com\n", serial->type->name); 510 err("%s: please contact support@connecttech.com\n", serial->type->description);
507 return -ENODEV; 511 return -ENODEV;
508 512
509no_command_private: 513no_command_private:
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index bb9819cc8826..1a9679f76f5a 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -2,7 +2,8 @@
2# USB Storage driver configuration 2# USB Storage driver configuration
3# 3#
4 4
5comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information" 5comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'"
6comment "may also be needed; see USB_STORAGE Help for more information"
6 depends on USB 7 depends on USB
7 8
8config USB_STORAGE 9config USB_STORAGE
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index 356342c6e7a2..33c55a6261bb 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -1,4 +1,4 @@
1/* Driver for SCM Microsystems USB-ATAPI cable 1/* Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
2 * 2 *
3 * $Id: shuttle_usbat.c,v 1.17 2002/04/22 03:39:43 mdharm Exp $ 3 * $Id: shuttle_usbat.c,v 1.17 2002/04/22 03:39:43 mdharm Exp $
4 * 4 *
@@ -67,10 +67,10 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
67static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us); 67static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
68 68
69/* 69/*
70 * Convenience function to produce an ATAPI read/write sectors command 70 * Convenience function to produce an ATA read/write sectors command
71 * Use cmd=0x20 for read, cmd=0x30 for write 71 * Use cmd=0x20 for read, cmd=0x30 for write
72 */ 72 */
73static void usbat_pack_atapi_sector_cmd(unsigned char *buf, 73static void usbat_pack_ata_sector_cmd(unsigned char *buf,
74 unsigned char thistime, 74 unsigned char thistime,
75 u32 sector, unsigned char cmd) 75 u32 sector, unsigned char cmd)
76{ 76{
@@ -196,10 +196,12 @@ static int usbat_check_status(struct us_data *us)
196 if (rc != USB_STOR_XFER_GOOD) 196 if (rc != USB_STOR_XFER_GOOD)
197 return USB_STOR_TRANSPORT_FAILED; 197 return USB_STOR_TRANSPORT_FAILED;
198 198
199 if (*reply & 0x01 && *reply != 0x51) // error/check condition (0x51 is ok) 199 /* error/check condition (0x51 is ok) */
200 if (*reply & 0x01 && *reply != 0x51)
200 return USB_STOR_TRANSPORT_FAILED; 201 return USB_STOR_TRANSPORT_FAILED;
201 202
202 if (*reply & 0x20) // device fault 203 /* device fault */
204 if (*reply & 0x20)
203 return USB_STOR_TRANSPORT_FAILED; 205 return USB_STOR_TRANSPORT_FAILED;
204 206
205 return USB_STOR_TRANSPORT_GOOD; 207 return USB_STOR_TRANSPORT_GOOD;
@@ -222,29 +224,39 @@ static int usbat_set_shuttle_features(struct us_data *us,
222 command[0] = 0x40; 224 command[0] = 0x40;
223 command[1] = USBAT_CMD_SET_FEAT; 225 command[1] = USBAT_CMD_SET_FEAT;
224 226
225 // The only bit relevant to ATA access is bit 6 227 /*
226 // which defines 8 bit data access (set) or 16 bit (unset) 228 * The only bit relevant to ATA access is bit 6
229 * which defines 8 bit data access (set) or 16 bit (unset)
230 */
227 command[2] = epp_control; 231 command[2] = epp_control;
228 232
229 // If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1, 233 /*
230 // ET1 and ET2 define an external event to be checked for on event of a 234 * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1,
231 // _read_blocks or _write_blocks operation. The read/write will not take 235 * ET1 and ET2 define an external event to be checked for on event of a
232 // place unless the defined trigger signal is active. 236 * _read_blocks or _write_blocks operation. The read/write will not take
237 * place unless the defined trigger signal is active.
238 */
233 command[3] = external_trigger; 239 command[3] = external_trigger;
234 240
235 // The resultant byte of the mask operation (see mask_byte) is compared for 241 /*
236 // equivalence with this test pattern. If equal, the read/write will take 242 * The resultant byte of the mask operation (see mask_byte) is compared for
237 // place. 243 * equivalence with this test pattern. If equal, the read/write will take
244 * place.
245 */
238 command[4] = test_pattern; 246 command[4] = test_pattern;
239 247
240 // This value is logically ANDed with the status register field specified 248 /*
241 // in the read/write command. 249 * This value is logically ANDed with the status register field specified
250 * in the read/write command.
251 */
242 command[5] = mask_byte; 252 command[5] = mask_byte;
243 253
244 // If ALQ is set in the qualifier, this field contains the address of the 254 /*
245 // registers where the byte count should be read for transferring the data. 255 * If ALQ is set in the qualifier, this field contains the address of the
246 // If ALQ is not set, then this field contains the number of bytes to be 256 * registers where the byte count should be read for transferring the data.
247 // transferred. 257 * If ALQ is not set, then this field contains the number of bytes to be
258 * transferred.
259 */
248 command[6] = subcountL; 260 command[6] = subcountL;
249 command[7] = subcountH; 261 command[7] = subcountH;
250 262
@@ -273,26 +285,26 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes)
273 285
274 if (result!=USB_STOR_XFER_GOOD) 286 if (result!=USB_STOR_XFER_GOOD)
275 return USB_STOR_TRANSPORT_ERROR; 287 return USB_STOR_TRANSPORT_ERROR;
276 if (*status & 0x01) { // check condition 288 if (*status & 0x01) { /* check condition */
277 result = usbat_read(us, USBAT_ATA, 0x10, status); 289 result = usbat_read(us, USBAT_ATA, 0x10, status);
278 return USB_STOR_TRANSPORT_FAILED; 290 return USB_STOR_TRANSPORT_FAILED;
279 } 291 }
280 if (*status & 0x20) // device fault 292 if (*status & 0x20) /* device fault */
281 return USB_STOR_TRANSPORT_FAILED; 293 return USB_STOR_TRANSPORT_FAILED;
282 294
283 if ((*status & 0x80)==0x00) { // not busy 295 if ((*status & 0x80)==0x00) { /* not busy */
284 US_DEBUGP("Waited not busy for %d steps\n", i); 296 US_DEBUGP("Waited not busy for %d steps\n", i);
285 return USB_STOR_TRANSPORT_GOOD; 297 return USB_STOR_TRANSPORT_GOOD;
286 } 298 }
287 299
288 if (i<500) 300 if (i<500)
289 msleep(10); // 5 seconds 301 msleep(10); /* 5 seconds */
290 else if (i<700) 302 else if (i<700)
291 msleep(50); // 10 seconds 303 msleep(50); /* 10 seconds */
292 else if (i<1200) 304 else if (i<1200)
293 msleep(100); // 50 seconds 305 msleep(100); /* 50 seconds */
294 else 306 else
295 msleep(1000); // X minutes 307 msleep(1000); /* X minutes */
296 } 308 }
297 309
298 US_DEBUGP("Waited not busy for %d minutes, timing out.\n", 310 US_DEBUGP("Waited not busy for %d minutes, timing out.\n",
@@ -412,9 +424,12 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
412 424
413 if (i==0) { 425 if (i==0) {
414 cmdlen = 16; 426 cmdlen = 16;
415 // Write to multiple registers 427 /*
416 // Not really sure the 0x07, 0x17, 0xfc, 0xe7 is necessary here, 428 * Write to multiple registers
417 // but that's what came out of the trace every single time. 429 * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is
430 * necessary here, but that's what came out of the
431 * trace every single time.
432 */
418 command[0] = 0x40; 433 command[0] = 0x40;
419 command[1] = access | USBAT_CMD_WRITE_REGS; 434 command[1] = access | USBAT_CMD_WRITE_REGS;
420 command[2] = 0x07; 435 command[2] = 0x07;
@@ -426,7 +441,7 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
426 } else 441 } else
427 cmdlen = 8; 442 cmdlen = 8;
428 443
429 // Conditionally read or write blocks 444 /* Conditionally read or write blocks */
430 command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0); 445 command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0);
431 command[cmdlen-7] = access | 446 command[cmdlen-7] = access |
432 (direction==DMA_TO_DEVICE ? 447 (direction==DMA_TO_DEVICE ?
@@ -456,11 +471,6 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
456 471
457 } 472 }
458 473
459
460 //US_DEBUGP("Transfer %s %d bytes, sg buffers %d\n",
461 // direction == DMA_TO_DEVICE ? "out" : "in",
462 // len, use_sg);
463
464 result = usb_stor_bulk_transfer_sg(us, 474 result = usb_stor_bulk_transfer_sg(us,
465 pipe, content, len, use_sg, NULL); 475 pipe, content, len, use_sg, NULL);
466 476
@@ -508,9 +518,9 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
508 518
509 if (result!=USB_STOR_XFER_GOOD) 519 if (result!=USB_STOR_XFER_GOOD)
510 return USB_STOR_TRANSPORT_ERROR; 520 return USB_STOR_TRANSPORT_ERROR;
511 if (*status & 0x01) // check condition 521 if (*status & 0x01) /* check condition */
512 return USB_STOR_TRANSPORT_FAILED; 522 return USB_STOR_TRANSPORT_FAILED;
513 if (*status & 0x20) // device fault 523 if (*status & 0x20) /* device fault */
514 return USB_STOR_TRANSPORT_FAILED; 524 return USB_STOR_TRANSPORT_FAILED;
515 525
516 US_DEBUGP("Redoing %s\n", 526 US_DEBUGP("Redoing %s\n",
@@ -547,32 +557,32 @@ static int usbat_multiple_write(struct us_data *us,
547 557
548 BUG_ON(num_registers > US_IOBUF_SIZE/2); 558 BUG_ON(num_registers > US_IOBUF_SIZE/2);
549 559
550 // Write to multiple registers, ATA access 560 /* Write to multiple registers, ATA access */
551 command[0] = 0x40; 561 command[0] = 0x40;
552 command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS; 562 command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS;
553 563
554 // No relevance 564 /* No relevance */
555 command[2] = 0; 565 command[2] = 0;
556 command[3] = 0; 566 command[3] = 0;
557 command[4] = 0; 567 command[4] = 0;
558 command[5] = 0; 568 command[5] = 0;
559 569
560 // Number of bytes to be transferred (incl. addresses and data) 570 /* Number of bytes to be transferred (incl. addresses and data) */
561 command[6] = LSB_of(num_registers*2); 571 command[6] = LSB_of(num_registers*2);
562 command[7] = MSB_of(num_registers*2); 572 command[7] = MSB_of(num_registers*2);
563 573
564 // The setup command 574 /* The setup command */
565 result = usbat_execute_command(us, command, 8); 575 result = usbat_execute_command(us, command, 8);
566 if (result != USB_STOR_XFER_GOOD) 576 if (result != USB_STOR_XFER_GOOD)
567 return USB_STOR_TRANSPORT_ERROR; 577 return USB_STOR_TRANSPORT_ERROR;
568 578
569 // Create the reg/data, reg/data sequence 579 /* Create the reg/data, reg/data sequence */
570 for (i=0; i<num_registers; i++) { 580 for (i=0; i<num_registers; i++) {
571 data[i<<1] = registers[i]; 581 data[i<<1] = registers[i];
572 data[1+(i<<1)] = data_out[i]; 582 data[1+(i<<1)] = data_out[i];
573 } 583 }
574 584
575 // Send the data 585 /* Send the data */
576 result = usbat_bulk_write(us, data, num_registers*2); 586 result = usbat_bulk_write(us, data, num_registers*2);
577 if (result != USB_STOR_XFER_GOOD) 587 if (result != USB_STOR_XFER_GOOD)
578 return USB_STOR_TRANSPORT_ERROR; 588 return USB_STOR_TRANSPORT_ERROR;
@@ -606,17 +616,17 @@ static int usbat_read_blocks(struct us_data *us,
606 command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK; 616 command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK;
607 command[2] = USBAT_ATA_DATA; 617 command[2] = USBAT_ATA_DATA;
608 command[3] = USBAT_ATA_STATUS; 618 command[3] = USBAT_ATA_STATUS;
609 command[4] = 0xFD; // Timeout (ms); 619 command[4] = 0xFD; /* Timeout (ms); */
610 command[5] = USBAT_QUAL_FCQ; 620 command[5] = USBAT_QUAL_FCQ;
611 command[6] = LSB_of(len); 621 command[6] = LSB_of(len);
612 command[7] = MSB_of(len); 622 command[7] = MSB_of(len);
613 623
614 // Multiple block read setup command 624 /* Multiple block read setup command */
615 result = usbat_execute_command(us, command, 8); 625 result = usbat_execute_command(us, command, 8);
616 if (result != USB_STOR_XFER_GOOD) 626 if (result != USB_STOR_XFER_GOOD)
617 return USB_STOR_TRANSPORT_FAILED; 627 return USB_STOR_TRANSPORT_FAILED;
618 628
619 // Read the blocks we just asked for 629 /* Read the blocks we just asked for */
620 result = usbat_bulk_read(us, buffer, len); 630 result = usbat_bulk_read(us, buffer, len);
621 if (result != USB_STOR_XFER_GOOD) 631 if (result != USB_STOR_XFER_GOOD)
622 return USB_STOR_TRANSPORT_FAILED; 632 return USB_STOR_TRANSPORT_FAILED;
@@ -647,17 +657,17 @@ static int usbat_write_blocks(struct us_data *us,
647 command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK; 657 command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK;
648 command[2] = USBAT_ATA_DATA; 658 command[2] = USBAT_ATA_DATA;
649 command[3] = USBAT_ATA_STATUS; 659 command[3] = USBAT_ATA_STATUS;
650 command[4] = 0xFD; // Timeout (ms) 660 command[4] = 0xFD; /* Timeout (ms) */
651 command[5] = USBAT_QUAL_FCQ; 661 command[5] = USBAT_QUAL_FCQ;
652 command[6] = LSB_of(len); 662 command[6] = LSB_of(len);
653 command[7] = MSB_of(len); 663 command[7] = MSB_of(len);
654 664
655 // Multiple block write setup command 665 /* Multiple block write setup command */
656 result = usbat_execute_command(us, command, 8); 666 result = usbat_execute_command(us, command, 8);
657 if (result != USB_STOR_XFER_GOOD) 667 if (result != USB_STOR_XFER_GOOD)
658 return USB_STOR_TRANSPORT_FAILED; 668 return USB_STOR_TRANSPORT_FAILED;
659 669
660 // Write the data 670 /* Write the data */
661 result = usbat_bulk_write(us, buffer, len); 671 result = usbat_bulk_write(us, buffer, len);
662 if (result != USB_STOR_XFER_GOOD) 672 if (result != USB_STOR_XFER_GOOD)
663 return USB_STOR_TRANSPORT_FAILED; 673 return USB_STOR_TRANSPORT_FAILED;
@@ -711,16 +721,20 @@ static int usbat_device_reset(struct us_data *us)
711{ 721{
712 int rc; 722 int rc;
713 723
714 // Reset peripheral, enable peripheral control signals 724 /*
715 // (bring reset signal up) 725 * Reset peripheral, enable peripheral control signals
726 * (bring reset signal up)
727 */
716 rc = usbat_write_user_io(us, 728 rc = usbat_write_user_io(us,
717 USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0, 729 USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0,
718 USBAT_UIO_EPAD | USBAT_UIO_1); 730 USBAT_UIO_EPAD | USBAT_UIO_1);
719 if (rc != USB_STOR_XFER_GOOD) 731 if (rc != USB_STOR_XFER_GOOD)
720 return USB_STOR_TRANSPORT_ERROR; 732 return USB_STOR_TRANSPORT_ERROR;
721 733
722 // Enable peripheral control signals 734 /*
723 // (bring reset signal down) 735 * Enable peripheral control signals
736 * (bring reset signal down)
737 */
724 rc = usbat_write_user_io(us, 738 rc = usbat_write_user_io(us,
725 USBAT_UIO_OE1 | USBAT_UIO_OE0, 739 USBAT_UIO_OE1 | USBAT_UIO_OE0,
726 USBAT_UIO_EPAD | USBAT_UIO_1); 740 USBAT_UIO_EPAD | USBAT_UIO_1);
@@ -737,7 +751,7 @@ static int usbat_device_enable_cdt(struct us_data *us)
737{ 751{
738 int rc; 752 int rc;
739 753
740 // Enable peripheral control signals and card detect 754 /* Enable peripheral control signals and card detect */
741 rc = usbat_write_user_io(us, 755 rc = usbat_write_user_io(us,
742 USBAT_UIO_ACKD | USBAT_UIO_OE1 | USBAT_UIO_OE0, 756 USBAT_UIO_ACKD | USBAT_UIO_OE1 | USBAT_UIO_OE0,
743 USBAT_UIO_EPAD | USBAT_UIO_1); 757 USBAT_UIO_EPAD | USBAT_UIO_1);
@@ -786,7 +800,7 @@ static int usbat_flash_check_media(struct us_data *us,
786 if (rc != USB_STOR_XFER_GOOD) 800 if (rc != USB_STOR_XFER_GOOD)
787 return USB_STOR_TRANSPORT_ERROR; 801 return USB_STOR_TRANSPORT_ERROR;
788 802
789 // Check for media existence 803 /* Check for media existence */
790 rc = usbat_flash_check_media_present(uio); 804 rc = usbat_flash_check_media_present(uio);
791 if (rc == USBAT_FLASH_MEDIA_NONE) { 805 if (rc == USBAT_FLASH_MEDIA_NONE) {
792 info->sense_key = 0x02; 806 info->sense_key = 0x02;
@@ -795,11 +809,11 @@ static int usbat_flash_check_media(struct us_data *us,
795 return USB_STOR_TRANSPORT_FAILED; 809 return USB_STOR_TRANSPORT_FAILED;
796 } 810 }
797 811
798 // Check for media change 812 /* Check for media change */
799 rc = usbat_flash_check_media_changed(uio); 813 rc = usbat_flash_check_media_changed(uio);
800 if (rc == USBAT_FLASH_MEDIA_CHANGED) { 814 if (rc == USBAT_FLASH_MEDIA_CHANGED) {
801 815
802 // Reset and re-enable card detect 816 /* Reset and re-enable card detect */
803 rc = usbat_device_reset(us); 817 rc = usbat_device_reset(us);
804 if (rc != USB_STOR_TRANSPORT_GOOD) 818 if (rc != USB_STOR_TRANSPORT_GOOD)
805 return rc; 819 return rc;
@@ -855,15 +869,15 @@ static int usbat_identify_device(struct us_data *us,
855 if (rc != USB_STOR_XFER_GOOD) 869 if (rc != USB_STOR_XFER_GOOD)
856 return USB_STOR_TRANSPORT_ERROR; 870 return USB_STOR_TRANSPORT_ERROR;
857 871
858 // Check for error bit 872 /* Check for error bit, or if the command 'fell through' */
859 if (status & 0x01) { 873 if (status == 0xA1 || !(status & 0x01)) {
860 // Device is a CompactFlash reader/writer 874 /* Device is HP 8200 */
861 US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
862 info->devicetype = USBAT_DEV_FLASH;
863 } else {
864 // Device is HP 8200
865 US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n"); 875 US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n");
866 info->devicetype = USBAT_DEV_HP8200; 876 info->devicetype = USBAT_DEV_HP8200;
877 } else {
878 /* Device is a CompactFlash reader/writer */
879 US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
880 info->devicetype = USBAT_DEV_FLASH;
867 } 881 }
868 882
869 return USB_STOR_TRANSPORT_GOOD; 883 return USB_STOR_TRANSPORT_GOOD;
@@ -916,7 +930,7 @@ static int usbat_flash_get_sector_count(struct us_data *us,
916 if (!reply) 930 if (!reply)
917 return USB_STOR_TRANSPORT_ERROR; 931 return USB_STOR_TRANSPORT_ERROR;
918 932
919 // ATAPI command : IDENTIFY DEVICE 933 /* ATA command : IDENTIFY DEVICE */
920 rc = usbat_multiple_write(us, registers, command, 3); 934 rc = usbat_multiple_write(us, registers, command, 3);
921 if (rc != USB_STOR_XFER_GOOD) { 935 if (rc != USB_STOR_XFER_GOOD) {
922 US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n"); 936 US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n");
@@ -924,7 +938,7 @@ static int usbat_flash_get_sector_count(struct us_data *us,
924 goto leave; 938 goto leave;
925 } 939 }
926 940
927 // Read device status 941 /* Read device status */
928 if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) { 942 if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) {
929 rc = USB_STOR_TRANSPORT_ERROR; 943 rc = USB_STOR_TRANSPORT_ERROR;
930 goto leave; 944 goto leave;
@@ -932,7 +946,7 @@ static int usbat_flash_get_sector_count(struct us_data *us,
932 946
933 msleep(100); 947 msleep(100);
934 948
935 // Read the device identification data 949 /* Read the device identification data */
936 rc = usbat_read_block(us, reply, 512); 950 rc = usbat_read_block(us, reply, 512);
937 if (rc != USB_STOR_TRANSPORT_GOOD) 951 if (rc != USB_STOR_TRANSPORT_GOOD)
938 goto leave; 952 goto leave;
@@ -977,19 +991,23 @@ static int usbat_flash_read_data(struct us_data *us,
977 if (result != USB_STOR_TRANSPORT_GOOD) 991 if (result != USB_STOR_TRANSPORT_GOOD)
978 return result; 992 return result;
979 993
980 // we're working in LBA mode. according to the ATA spec, 994 /*
981 // we can support up to 28-bit addressing. I don't know if Jumpshot 995 * we're working in LBA mode. according to the ATA spec,
982 // supports beyond 24-bit addressing. It's kind of hard to test 996 * we can support up to 28-bit addressing. I don't know if Jumpshot
983 // since it requires > 8GB CF card. 997 * supports beyond 24-bit addressing. It's kind of hard to test
998 * since it requires > 8GB CF card.
999 */
984 1000
985 if (sector > 0x0FFFFFFF) 1001 if (sector > 0x0FFFFFFF)
986 return USB_STOR_TRANSPORT_ERROR; 1002 return USB_STOR_TRANSPORT_ERROR;
987 1003
988 totallen = sectors * info->ssize; 1004 totallen = sectors * info->ssize;
989 1005
990 // Since we don't read more than 64 KB at a time, we have to create 1006 /*
991 // a bounce buffer and move the data a piece at a time between the 1007 * Since we don't read more than 64 KB at a time, we have to create
992 // bounce buffer and the actual transfer buffer. 1008 * a bounce buffer and move the data a piece at a time between the
1009 * bounce buffer and the actual transfer buffer.
1010 */
993 1011
994 alloclen = min(totallen, 65536u); 1012 alloclen = min(totallen, 65536u);
995 buffer = kmalloc(alloclen, GFP_NOIO); 1013 buffer = kmalloc(alloclen, GFP_NOIO);
@@ -997,27 +1015,29 @@ static int usbat_flash_read_data(struct us_data *us,
997 return USB_STOR_TRANSPORT_ERROR; 1015 return USB_STOR_TRANSPORT_ERROR;
998 1016
999 do { 1017 do {
1000 // loop, never allocate or transfer more than 64k at once 1018 /*
1001 // (min(128k, 255*info->ssize) is the real limit) 1019 * loop, never allocate or transfer more than 64k at once
1020 * (min(128k, 255*info->ssize) is the real limit)
1021 */
1002 len = min(totallen, alloclen); 1022 len = min(totallen, alloclen);
1003 thistime = (len / info->ssize) & 0xff; 1023 thistime = (len / info->ssize) & 0xff;
1004 1024
1005 // ATAPI command 0x20 (READ SECTORS) 1025 /* ATA command 0x20 (READ SECTORS) */
1006 usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x20); 1026 usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20);
1007 1027
1008 // Write/execute ATAPI read command 1028 /* Write/execute ATA read command */
1009 result = usbat_multiple_write(us, registers, command, 7); 1029 result = usbat_multiple_write(us, registers, command, 7);
1010 if (result != USB_STOR_TRANSPORT_GOOD) 1030 if (result != USB_STOR_TRANSPORT_GOOD)
1011 goto leave; 1031 goto leave;
1012 1032
1013 // Read the data we just requested 1033 /* Read the data we just requested */
1014 result = usbat_read_blocks(us, buffer, len); 1034 result = usbat_read_blocks(us, buffer, len);
1015 if (result != USB_STOR_TRANSPORT_GOOD) 1035 if (result != USB_STOR_TRANSPORT_GOOD)
1016 goto leave; 1036 goto leave;
1017 1037
1018 US_DEBUGP("usbat_flash_read_data: %d bytes\n", len); 1038 US_DEBUGP("usbat_flash_read_data: %d bytes\n", len);
1019 1039
1020 // Store the data in the transfer buffer 1040 /* Store the data in the transfer buffer */
1021 usb_stor_access_xfer_buf(buffer, len, us->srb, 1041 usb_stor_access_xfer_buf(buffer, len, us->srb,
1022 &sg_idx, &sg_offset, TO_XFER_BUF); 1042 &sg_idx, &sg_offset, TO_XFER_BUF);
1023 1043
@@ -1061,19 +1081,23 @@ static int usbat_flash_write_data(struct us_data *us,
1061 if (result != USB_STOR_TRANSPORT_GOOD) 1081 if (result != USB_STOR_TRANSPORT_GOOD)
1062 return result; 1082 return result;
1063 1083
1064 // we're working in LBA mode. according to the ATA spec, 1084 /*
1065 // we can support up to 28-bit addressing. I don't know if Jumpshot 1085 * we're working in LBA mode. according to the ATA spec,
1066 // supports beyond 24-bit addressing. It's kind of hard to test 1086 * we can support up to 28-bit addressing. I don't know if the device
1067 // since it requires > 8GB CF card. 1087 * supports beyond 24-bit addressing. It's kind of hard to test
1088 * since it requires > 8GB media.
1089 */
1068 1090
1069 if (sector > 0x0FFFFFFF) 1091 if (sector > 0x0FFFFFFF)
1070 return USB_STOR_TRANSPORT_ERROR; 1092 return USB_STOR_TRANSPORT_ERROR;
1071 1093
1072 totallen = sectors * info->ssize; 1094 totallen = sectors * info->ssize;
1073 1095
1074 // Since we don't write more than 64 KB at a time, we have to create 1096 /*
1075 // a bounce buffer and move the data a piece at a time between the 1097 * Since we don't write more than 64 KB at a time, we have to create
1076 // bounce buffer and the actual transfer buffer. 1098 * a bounce buffer and move the data a piece at a time between the
1099 * bounce buffer and the actual transfer buffer.
1100 */
1077 1101
1078 alloclen = min(totallen, 65536u); 1102 alloclen = min(totallen, 65536u);
1079 buffer = kmalloc(alloclen, GFP_NOIO); 1103 buffer = kmalloc(alloclen, GFP_NOIO);
@@ -1081,24 +1105,26 @@ static int usbat_flash_write_data(struct us_data *us,
1081 return USB_STOR_TRANSPORT_ERROR; 1105 return USB_STOR_TRANSPORT_ERROR;
1082 1106
1083 do { 1107 do {
1084 // loop, never allocate or transfer more than 64k at once 1108 /*
1085 // (min(128k, 255*info->ssize) is the real limit) 1109 * loop, never allocate or transfer more than 64k at once
1110 * (min(128k, 255*info->ssize) is the real limit)
1111 */
1086 len = min(totallen, alloclen); 1112 len = min(totallen, alloclen);
1087 thistime = (len / info->ssize) & 0xff; 1113 thistime = (len / info->ssize) & 0xff;
1088 1114
1089 // Get the data from the transfer buffer 1115 /* Get the data from the transfer buffer */
1090 usb_stor_access_xfer_buf(buffer, len, us->srb, 1116 usb_stor_access_xfer_buf(buffer, len, us->srb,
1091 &sg_idx, &sg_offset, FROM_XFER_BUF); 1117 &sg_idx, &sg_offset, FROM_XFER_BUF);
1092 1118
1093 // ATAPI command 0x30 (WRITE SECTORS) 1119 /* ATA command 0x30 (WRITE SECTORS) */
1094 usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x30); 1120 usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30);
1095 1121
1096 // Write/execute ATAPI write command 1122 /* Write/execute ATA write command */
1097 result = usbat_multiple_write(us, registers, command, 7); 1123 result = usbat_multiple_write(us, registers, command, 7);
1098 if (result != USB_STOR_TRANSPORT_GOOD) 1124 if (result != USB_STOR_TRANSPORT_GOOD)
1099 goto leave; 1125 goto leave;
1100 1126
1101 // Write the data 1127 /* Write the data */
1102 result = usbat_write_blocks(us, buffer, len); 1128 result = usbat_write_blocks(us, buffer, len);
1103 if (result != USB_STOR_TRANSPORT_GOOD) 1129 if (result != USB_STOR_TRANSPORT_GOOD)
1104 goto leave; 1130 goto leave;
@@ -1169,42 +1195,44 @@ static int usbat_hp8200e_handle_read10(struct us_data *us,
1169 srb->transfersize); 1195 srb->transfersize);
1170 } 1196 }
1171 1197
1172 // Since we only read in one block at a time, we have to create 1198 /*
1173 // a bounce buffer and move the data a piece at a time between the 1199 * Since we only read in one block at a time, we have to create
1174 // bounce buffer and the actual transfer buffer. 1200 * a bounce buffer and move the data a piece at a time between the
1201 * bounce buffer and the actual transfer buffer.
1202 */
1175 1203
1176 len = (65535/srb->transfersize) * srb->transfersize; 1204 len = (65535/srb->transfersize) * srb->transfersize;
1177 US_DEBUGP("Max read is %d bytes\n", len); 1205 US_DEBUGP("Max read is %d bytes\n", len);
1178 len = min(len, srb->request_bufflen); 1206 len = min(len, srb->request_bufflen);
1179 buffer = kmalloc(len, GFP_NOIO); 1207 buffer = kmalloc(len, GFP_NOIO);
1180 if (buffer == NULL) // bloody hell! 1208 if (buffer == NULL) /* bloody hell! */
1181 return USB_STOR_TRANSPORT_FAILED; 1209 return USB_STOR_TRANSPORT_FAILED;
1182 sector = short_pack(data[7+3], data[7+2]); 1210 sector = short_pack(data[7+3], data[7+2]);
1183 sector <<= 16; 1211 sector <<= 16;
1184 sector |= short_pack(data[7+5], data[7+4]); 1212 sector |= short_pack(data[7+5], data[7+4]);
1185 transferred = 0; 1213 transferred = 0;
1186 1214
1187 sg_segment = 0; // for keeping track of where we are in 1215 sg_segment = 0; /* for keeping track of where we are in */
1188 sg_offset = 0; // the scatter/gather list 1216 sg_offset = 0; /* the scatter/gather list */
1189 1217
1190 while (transferred != srb->request_bufflen) { 1218 while (transferred != srb->request_bufflen) {
1191 1219
1192 if (len > srb->request_bufflen - transferred) 1220 if (len > srb->request_bufflen - transferred)
1193 len = srb->request_bufflen - transferred; 1221 len = srb->request_bufflen - transferred;
1194 1222
1195 data[3] = len&0xFF; // (cylL) = expected length (L) 1223 data[3] = len&0xFF; /* (cylL) = expected length (L) */
1196 data[4] = (len>>8)&0xFF; // (cylH) = expected length (H) 1224 data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
1197 1225
1198 // Fix up the SCSI command sector and num sectors 1226 /* Fix up the SCSI command sector and num sectors */
1199 1227
1200 data[7+2] = MSB_of(sector>>16); // SCSI command sector 1228 data[7+2] = MSB_of(sector>>16); /* SCSI command sector */
1201 data[7+3] = LSB_of(sector>>16); 1229 data[7+3] = LSB_of(sector>>16);
1202 data[7+4] = MSB_of(sector&0xFFFF); 1230 data[7+4] = MSB_of(sector&0xFFFF);
1203 data[7+5] = LSB_of(sector&0xFFFF); 1231 data[7+5] = LSB_of(sector&0xFFFF);
1204 if (data[7+0] == GPCMD_READ_CD) 1232 if (data[7+0] == GPCMD_READ_CD)
1205 data[7+6] = 0; 1233 data[7+6] = 0;
1206 data[7+7] = MSB_of(len / srb->transfersize); // SCSI command 1234 data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */
1207 data[7+8] = LSB_of(len / srb->transfersize); // num sectors 1235 data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */
1208 1236
1209 result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, 1237 result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
1210 registers, data, 19, 1238 registers, data, 19,
@@ -1217,16 +1245,16 @@ static int usbat_hp8200e_handle_read10(struct us_data *us,
1217 if (result != USB_STOR_TRANSPORT_GOOD) 1245 if (result != USB_STOR_TRANSPORT_GOOD)
1218 break; 1246 break;
1219 1247
1220 // Store the data in the transfer buffer 1248 /* Store the data in the transfer buffer */
1221 usb_stor_access_xfer_buf(buffer, len, srb, 1249 usb_stor_access_xfer_buf(buffer, len, srb,
1222 &sg_segment, &sg_offset, TO_XFER_BUF); 1250 &sg_segment, &sg_offset, TO_XFER_BUF);
1223 1251
1224 // Update the amount transferred and the sector number 1252 /* Update the amount transferred and the sector number */
1225 1253
1226 transferred += len; 1254 transferred += len;
1227 sector += len / srb->transfersize; 1255 sector += len / srb->transfersize;
1228 1256
1229 } // while transferred != srb->request_bufflen 1257 } /* while transferred != srb->request_bufflen */
1230 1258
1231 kfree(buffer); 1259 kfree(buffer);
1232 return result; 1260 return result;
@@ -1237,7 +1265,7 @@ static int usbat_select_and_test_registers(struct us_data *us)
1237 int selector; 1265 int selector;
1238 unsigned char *status = us->iobuf; 1266 unsigned char *status = us->iobuf;
1239 1267
1240 // try device = master, then device = slave. 1268 /* try device = master, then device = slave. */
1241 for (selector = 0xA0; selector <= 0xB0; selector += 0x10) { 1269 for (selector = 0xA0; selector <= 0xB0; selector += 0x10) {
1242 if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) != 1270 if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
1243 USB_STOR_XFER_GOOD) 1271 USB_STOR_XFER_GOOD)
@@ -1298,7 +1326,7 @@ int init_usbat(struct us_data *us)
1298 memset(us->extra, 0, sizeof(struct usbat_info)); 1326 memset(us->extra, 0, sizeof(struct usbat_info));
1299 info = (struct usbat_info *) (us->extra); 1327 info = (struct usbat_info *) (us->extra);
1300 1328
1301 // Enable peripheral control signals 1329 /* Enable peripheral control signals */
1302 rc = usbat_write_user_io(us, 1330 rc = usbat_write_user_io(us,
1303 USBAT_UIO_OE1 | USBAT_UIO_OE0, 1331 USBAT_UIO_OE1 | USBAT_UIO_OE0,
1304 USBAT_UIO_EPAD | USBAT_UIO_1); 1332 USBAT_UIO_EPAD | USBAT_UIO_1);
@@ -1337,7 +1365,7 @@ int init_usbat(struct us_data *us)
1337 1365
1338 US_DEBUGP("INIT 5\n"); 1366 US_DEBUGP("INIT 5\n");
1339 1367
1340 // Enable peripheral control signals and card detect 1368 /* Enable peripheral control signals and card detect */
1341 rc = usbat_device_enable_cdt(us); 1369 rc = usbat_device_enable_cdt(us);
1342 if (rc != USB_STOR_TRANSPORT_GOOD) 1370 if (rc != USB_STOR_TRANSPORT_GOOD)
1343 return rc; 1371 return rc;
@@ -1364,7 +1392,7 @@ int init_usbat(struct us_data *us)
1364 1392
1365 US_DEBUGP("INIT 9\n"); 1393 US_DEBUGP("INIT 9\n");
1366 1394
1367 // At this point, we need to detect which device we are using 1395 /* At this point, we need to detect which device we are using */
1368 if (usbat_set_transport(us, info)) 1396 if (usbat_set_transport(us, info))
1369 return USB_STOR_TRANSPORT_ERROR; 1397 return USB_STOR_TRANSPORT_ERROR;
1370 1398
@@ -1414,10 +1442,10 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
1414 data[0] = 0x00; 1442 data[0] = 0x00;
1415 data[1] = 0x00; 1443 data[1] = 0x00;
1416 data[2] = 0x00; 1444 data[2] = 0x00;
1417 data[3] = len&0xFF; // (cylL) = expected length (L) 1445 data[3] = len&0xFF; /* (cylL) = expected length (L) */
1418 data[4] = (len>>8)&0xFF; // (cylH) = expected length (H) 1446 data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
1419 data[5] = 0xB0; // (device sel) = slave 1447 data[5] = 0xB0; /* (device sel) = slave */
1420 data[6] = 0xA0; // (command) = ATA PACKET COMMAND 1448 data[6] = 0xA0; /* (command) = ATA PACKET COMMAND */
1421 1449
1422 for (i=7; i<19; i++) { 1450 for (i=7; i<19; i++) {
1423 registers[i] = 0x10; 1451 registers[i] = 0x10;
@@ -1466,13 +1494,15 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
1466 return result; 1494 return result;
1467 } 1495 }
1468 1496
1469 // Write the 12-byte command header. 1497 /*
1470 1498 * Write the 12-byte command header.
1471 // If the command is BLANK then set the timer for 75 minutes. 1499 *
1472 // Otherwise set it for 10 minutes. 1500 * If the command is BLANK then set the timer for 75 minutes.
1473 1501 * Otherwise set it for 10 minutes.
1474 // NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW 1502 *
1475 // AT SPEED 4 IS UNRELIABLE!!! 1503 * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW
1504 * AT SPEED 4 IS UNRELIABLE!!!
1505 */
1476 1506
1477 if ( (result = usbat_write_block(us, 1507 if ( (result = usbat_write_block(us,
1478 USBAT_ATA, srb->cmnd, 12, 1508 USBAT_ATA, srb->cmnd, 12,
@@ -1481,19 +1511,18 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
1481 return result; 1511 return result;
1482 } 1512 }
1483 1513
1484 // If there is response data to be read in 1514 /* If there is response data to be read in then do it here. */
1485 // then do it here.
1486 1515
1487 if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) { 1516 if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) {
1488 1517
1489 // How many bytes to read in? Check cylL register 1518 /* How many bytes to read in? Check cylL register */
1490 1519
1491 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 1520 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
1492 USB_STOR_XFER_GOOD) { 1521 USB_STOR_XFER_GOOD) {
1493 return USB_STOR_TRANSPORT_ERROR; 1522 return USB_STOR_TRANSPORT_ERROR;
1494 } 1523 }
1495 1524
1496 if (len > 0xFF) { // need to read cylH also 1525 if (len > 0xFF) { /* need to read cylH also */
1497 len = *status; 1526 len = *status;
1498 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != 1527 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
1499 USB_STOR_XFER_GOOD) { 1528 USB_STOR_XFER_GOOD) {
@@ -1556,13 +1585,16 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
1556 if (rc != USB_STOR_TRANSPORT_GOOD) 1585 if (rc != USB_STOR_TRANSPORT_GOOD)
1557 return rc; 1586 return rc;
1558 1587
1559 info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec 1588 /* hard coded 512 byte sectors as per ATA spec */
1589 info->ssize = 0x200;
1560 US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n", 1590 US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
1561 info->sectors, info->ssize); 1591 info->sectors, info->ssize);
1562 1592
1563 // build the reply 1593 /*
1564 // note: must return the sector number of the last sector, 1594 * build the reply
1565 // *not* the total number of sectors 1595 * note: must return the sector number of the last sector,
1596 * *not* the total number of sectors
1597 */
1566 ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); 1598 ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
1567 ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); 1599 ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
1568 usb_stor_set_xfer_buf(ptr, 8, srb); 1600 usb_stor_set_xfer_buf(ptr, 8, srb);
@@ -1586,7 +1618,9 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
1586 } 1618 }
1587 1619
1588 if (srb->cmnd[0] == READ_12) { 1620 if (srb->cmnd[0] == READ_12) {
1589 // I don't think we'll ever see a READ_12 but support it anyway... 1621 /*
1622 * I don't think we'll ever see a READ_12 but support it anyway
1623 */
1590 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | 1624 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
1591 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); 1625 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
1592 1626
@@ -1608,7 +1642,9 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
1608 } 1642 }
1609 1643
1610 if (srb->cmnd[0] == WRITE_12) { 1644 if (srb->cmnd[0] == WRITE_12) {
1611 // I don't think we'll ever see a WRITE_12 but support it anyway... 1645 /*
1646 * I don't think we'll ever see a WRITE_12 but support it anyway
1647 */
1612 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | 1648 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
1613 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); 1649 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
1614 1650
@@ -1645,8 +1681,10 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
1645 } 1681 }
1646 1682
1647 if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { 1683 if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
1648 // sure. whatever. not like we can stop the user from popping 1684 /*
1649 // the media out of the device (no locking doors, etc) 1685 * sure. whatever. not like we can stop the user from popping
1686 * the media out of the device (no locking doors, etc)
1687 */
1650 return USB_STOR_TRANSPORT_GOOD; 1688 return USB_STOR_TRANSPORT_GOOD;
1651 } 1689 }
1652 1690
diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h
index 5b8e867e2ae5..25e7d8b340b8 100644
--- a/drivers/usb/storage/shuttle_usbat.h
+++ b/drivers/usb/storage/shuttle_usbat.h
@@ -55,8 +55,8 @@
55#define USBAT_UIO_WRITE 0 55#define USBAT_UIO_WRITE 0
56 56
57/* Qualifier bits */ 57/* Qualifier bits */
58#define USBAT_QUAL_FCQ 0x20 // full compare 58#define USBAT_QUAL_FCQ 0x20 /* full compare */
59#define USBAT_QUAL_ALQ 0x10 // auto load subcount 59#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */
60 60
61/* USBAT Flash Media status types */ 61/* USBAT Flash Media status types */
62#define USBAT_FLASH_MEDIA_NONE 0 62#define USBAT_FLASH_MEDIA_NONE 0
@@ -67,39 +67,39 @@
67#define USBAT_FLASH_MEDIA_CHANGED 1 67#define USBAT_FLASH_MEDIA_CHANGED 1
68 68
69/* USBAT ATA registers */ 69/* USBAT ATA registers */
70#define USBAT_ATA_DATA 0x10 // read/write data (R/W) 70#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */
71#define USBAT_ATA_FEATURES 0x11 // set features (W) 71#define USBAT_ATA_FEATURES 0x11 /* set features (W) */
72#define USBAT_ATA_ERROR 0x11 // error (R) 72#define USBAT_ATA_ERROR 0x11 /* error (R) */
73#define USBAT_ATA_SECCNT 0x12 // sector count (R/W) 73#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */
74#define USBAT_ATA_SECNUM 0x13 // sector number (R/W) 74#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */
75#define USBAT_ATA_LBA_ME 0x14 // cylinder low (R/W) 75#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */
76#define USBAT_ATA_LBA_HI 0x15 // cylinder high (R/W) 76#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */
77#define USBAT_ATA_DEVICE 0x16 // head/device selection (R/W) 77#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */
78#define USBAT_ATA_STATUS 0x17 // device status (R) 78#define USBAT_ATA_STATUS 0x17 /* device status (R) */
79#define USBAT_ATA_CMD 0x17 // device command (W) 79#define USBAT_ATA_CMD 0x17 /* device command (W) */
80#define USBAT_ATA_ALTSTATUS 0x0E // status (no clear IRQ) (R) 80#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */
81 81
82/* USBAT User I/O Data registers */ 82/* USBAT User I/O Data registers */
83#define USBAT_UIO_EPAD 0x80 // Enable Peripheral Control Signals 83#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */
84#define USBAT_UIO_CDT 0x40 // Card Detect (Read Only) 84#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */
85 // CDT = ACKD & !UI1 & !UI0 85 /* CDT = ACKD & !UI1 & !UI0 */
86#define USBAT_UIO_1 0x20 // I/O 1 86#define USBAT_UIO_1 0x20 /* I/O 1 */
87#define USBAT_UIO_0 0x10 // I/O 0 87#define USBAT_UIO_0 0x10 /* I/O 0 */
88#define USBAT_UIO_EPP_ATA 0x08 // 1=EPP mode, 0=ATA mode 88#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */
89#define USBAT_UIO_UI1 0x04 // Input 1 89#define USBAT_UIO_UI1 0x04 /* Input 1 */
90#define USBAT_UIO_UI0 0x02 // Input 0 90#define USBAT_UIO_UI0 0x02 /* Input 0 */
91#define USBAT_UIO_INTR_ACK 0x01 // Interrupt (ATA & ISA)/Acknowledge (EPP) 91#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
92 92
93/* USBAT User I/O Enable registers */ 93/* USBAT User I/O Enable registers */
94#define USBAT_UIO_DRVRST 0x80 // Reset Peripheral 94#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */
95#define USBAT_UIO_ACKD 0x40 // Enable Card Detect 95#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */
96#define USBAT_UIO_OE1 0x20 // I/O 1 set=output/clr=input 96#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */
97 // If ACKD=1, set OE1 to 1 also. 97 /* If ACKD=1, set OE1 to 1 also. */
98#define USBAT_UIO_OE0 0x10 // I/O 0 set=output/clr=input 98#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */
99#define USBAT_UIO_ADPRST 0x01 // Reset SCM chip 99#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */
100 100
101/* USBAT Features */ 101/* USBAT Features */
102#define USBAT_FEAT_ETEN 0x80 // External trigger enable 102#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */
103#define USBAT_FEAT_U1 0x08 103#define USBAT_FEAT_U1 0x08
104#define USBAT_FEAT_U0 0x04 104#define USBAT_FEAT_U0 0x04
105#define USBAT_FEAT_ET1 0x02 105#define USBAT_FEAT_ET1 0x02
@@ -112,12 +112,12 @@ struct usbat_info {
112 int devicetype; 112 int devicetype;
113 113
114 /* Used for Flash readers only */ 114 /* Used for Flash readers only */
115 unsigned long sectors; // total sector count 115 unsigned long sectors; /* total sector count */
116 unsigned long ssize; // sector size in bytes 116 unsigned long ssize; /* sector size in bytes */
117 117
118 unsigned char sense_key; 118 unsigned char sense_key;
119 unsigned long sense_asc; // additional sense code 119 unsigned long sense_asc; /* additional sense code */
120 unsigned long sense_ascq; // additional sense code qualifier 120 unsigned long sense_ascq; /* additional sense code qualifier */
121}; 121};
122 122
123#endif 123#endif
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index c1ba5301ebfc..7ca896a342e3 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -636,11 +636,11 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
636 636
637 /* use the new buffer we have */ 637 /* use the new buffer we have */
638 old_request_buffer = srb->request_buffer; 638 old_request_buffer = srb->request_buffer;
639 srb->request_buffer = srb->sense_buffer; 639 srb->request_buffer = us->sensebuf;
640 640
641 /* set the buffer length for transfer */ 641 /* set the buffer length for transfer */
642 old_request_bufflen = srb->request_bufflen; 642 old_request_bufflen = srb->request_bufflen;
643 srb->request_bufflen = 18; 643 srb->request_bufflen = US_SENSE_SIZE;
644 644
645 /* set up for no scatter-gather use */ 645 /* set up for no scatter-gather use */
646 old_sg = srb->use_sg; 646 old_sg = srb->use_sg;
@@ -652,6 +652,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
652 temp_result = us->transport(us->srb, us); 652 temp_result = us->transport(us->srb, us);
653 653
654 /* let's clean up right away */ 654 /* let's clean up right away */
655 memcpy(srb->sense_buffer, us->sensebuf, US_SENSE_SIZE);
655 srb->resid = old_resid; 656 srb->resid = old_resid;
656 srb->request_buffer = old_request_buffer; 657 srb->request_buffer = old_request_buffer;
657 srb->request_bufflen = old_request_bufflen; 658 srb->request_bufflen = old_request_bufflen;
@@ -923,6 +924,7 @@ int usb_stor_Bulk_max_lun(struct us_data *us)
923 int result; 924 int result;
924 925
925 /* issue the command */ 926 /* issue the command */
927 us->iobuf[0] = 0;
926 result = usb_stor_control_msg(us, us->recv_ctrl_pipe, 928 result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
927 US_BULK_GET_MAX_LUN, 929 US_BULK_GET_MAX_LUN,
928 USB_DIR_IN | USB_TYPE_CLASS | 930 USB_DIR_IN | USB_TYPE_CLASS |
diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
index 8d9e0663f8fe..0a362cc781ad 100644
--- a/drivers/usb/storage/transport.h
+++ b/drivers/usb/storage/transport.h
@@ -50,7 +50,7 @@
50#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */ 50#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
51#define US_PR_BULK 0x50 /* bulk only */ 51#define US_PR_BULK 0x50 /* bulk only */
52#ifdef CONFIG_USB_STORAGE_USBAT 52#ifdef CONFIG_USB_STORAGE_USBAT
53#define US_PR_SCM_ATAPI 0x80 /* SCM-ATAPI bridge */ 53#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */
54#endif 54#endif
55#ifdef CONFIG_USB_STORAGE_SDDR09 55#ifdef CONFIG_USB_STORAGE_SDDR09
56#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */ 56#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index b79dad1b598c..9e926a8f2116 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -71,12 +71,12 @@ UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200,
71UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001, 71UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001,
72 "HP", 72 "HP",
73 "CD-Writer+ 8200e", 73 "CD-Writer+ 8200e",
74 US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0), 74 US_SC_8070, US_PR_USBAT, init_usbat, 0),
75 75
76UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, 76UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
77 "HP", 77 "HP",
78 "CD-Writer+ CD-4e", 78 "CD-Writer+ CD-4e",
79 US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0), 79 US_SC_8070, US_PR_USBAT, init_usbat, 0),
80#endif 80#endif
81 81
82/* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */ 82/* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
@@ -106,6 +106,13 @@ UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113,
106 US_SC_DEVICE, US_PR_DEVICE, NULL, 106 US_SC_DEVICE, US_PR_DEVICE, NULL,
107 US_FL_FIX_INQUIRY ), 107 US_FL_FIX_INQUIRY ),
108 108
109/* Reported by Stefan Werner <dustbln@gmx.de> */
110UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100,
111 "TrekStor",
112 "i.Beat Joy 2.0",
113 US_SC_DEVICE, US_PR_DEVICE, NULL,
114 US_FL_IGNORE_RESIDUE ),
115
109/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */ 116/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
110UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, 117UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210,
111 "SMSC", 118 "SMSC",
@@ -244,6 +251,13 @@ UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999,
244 US_SC_DEVICE, US_PR_DEVICE, NULL, 251 US_SC_DEVICE, US_PR_DEVICE, NULL,
245 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), 252 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
246 253
254/* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */
255UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999,
256 "LEICA",
257 "D-LUX Camera",
258 US_SC_DEVICE, US_PR_DEVICE, NULL,
259 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
260
247/* Most of the following entries were developed with the help of 261/* Most of the following entries were developed with the help of
248 * Shuttle/SCM directly. 262 * Shuttle/SCM directly.
249 */ 263 */
@@ -333,9 +347,9 @@ UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
333 347
334#ifdef CONFIG_USB_STORAGE_USBAT 348#ifdef CONFIG_USB_STORAGE_USBAT
335UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999, 349UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
336 "SCM", 350 "Shuttle/SCM",
337 "SCM USBAT-02", 351 "USBAT-02",
338 US_SC_SCSI, US_PR_SCM_ATAPI, init_usbat, 352 US_SC_SCSI, US_PR_USBAT, init_usbat,
339 US_FL_SINGLE_LUN), 353 US_FL_SINGLE_LUN),
340#endif 354#endif
341 355
@@ -598,6 +612,16 @@ UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
598 US_SC_DEVICE, US_PR_DEVICE, NULL, 612 US_SC_DEVICE, US_PR_DEVICE, NULL,
599 US_FL_FIX_CAPACITY ), 613 US_FL_FIX_CAPACITY ),
600 614
615/*
616 * Reported by Tyson Vinson <lornoss@gmail.com>
617 * This particular productId is the iPod Nano
618 */
619UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
620 "Apple",
621 "iPod",
622 US_SC_DEVICE, US_PR_DEVICE, NULL,
623 US_FL_FIX_CAPACITY ),
624
601#ifdef CONFIG_USB_STORAGE_JUMPSHOT 625#ifdef CONFIG_USB_STORAGE_JUMPSHOT
602UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001, 626UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001,
603 "Lexar", 627 "Lexar",
@@ -702,6 +726,14 @@ UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
702 US_SC_SCSI, US_PR_CB, NULL, 726 US_SC_SCSI, US_PR_CB, NULL,
703 US_FL_SINGLE_LUN ), 727 US_FL_SINGLE_LUN ),
704 728
729#ifdef CONFIG_USB_STORAGE_USBAT
730UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005,
731 "Sandisk",
732 "ImageMate SDDR-05b",
733 US_SC_SCSI, US_PR_USBAT, init_usbat,
734 US_FL_SINGLE_LUN ),
735#endif
736
705UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, 737UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
706 "Sandisk", 738 "Sandisk",
707 "ImageMate SDDR-12", 739 "ImageMate SDDR-12",
@@ -724,7 +756,7 @@ UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999,
724#endif 756#endif
725 757
726/* Reported by Eero Volotinen <eero@ping-viini.org> */ 758/* Reported by Eero Volotinen <eero@ping-viini.org> */
727UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0406, 0x0406, 759UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999,
728 "Freecom Technologies", 760 "Freecom Technologies",
729 "FHD-Classic", 761 "FHD-Classic",
730 US_SC_DEVICE, US_PR_DEVICE, NULL, 762 US_SC_DEVICE, US_PR_DEVICE, NULL,
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index f9a9bfa1aef5..3847ebed2aa4 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -54,6 +54,7 @@
54#include <linux/module.h> 54#include <linux/module.h>
55#include <linux/init.h> 55#include <linux/init.h>
56#include <linux/slab.h> 56#include <linux/slab.h>
57#include <linux/kthread.h>
57 58
58#include <scsi/scsi.h> 59#include <scsi/scsi.h>
59#include <scsi/scsi_cmnd.h> 60#include <scsi/scsi_cmnd.h>
@@ -111,11 +112,6 @@ static atomic_t total_threads = ATOMIC_INIT(0);
111static DECLARE_COMPLETION(threads_gone); 112static DECLARE_COMPLETION(threads_gone);
112 113
113 114
114static int storage_probe(struct usb_interface *iface,
115 const struct usb_device_id *id);
116
117static void storage_disconnect(struct usb_interface *iface);
118
119/* The entries in this table, except for final ones here 115/* The entries in this table, except for final ones here
120 * (USB_MASS_STORAGE_CLASS and the empty entry), correspond, 116 * (USB_MASS_STORAGE_CLASS and the empty entry), correspond,
121 * line for line with the entries of us_unsuaul_dev_list[]. 117 * line for line with the entries of us_unsuaul_dev_list[].
@@ -233,13 +229,40 @@ static struct us_unusual_dev us_unusual_dev_list[] = {
233 { NULL } 229 { NULL }
234}; 230};
235 231
236static struct usb_driver usb_storage_driver = { 232
237 .owner = THIS_MODULE, 233#ifdef CONFIG_PM /* Minimal support for suspend and resume */
238 .name = "usb-storage", 234
239 .probe = storage_probe, 235static int storage_suspend(struct usb_interface *iface, pm_message_t message)
240 .disconnect = storage_disconnect, 236{
241 .id_table = storage_usb_ids, 237 struct us_data *us = usb_get_intfdata(iface);
242}; 238
239 /* Wait until no command is running */
240 down(&us->dev_semaphore);
241
242 US_DEBUGP("%s\n", __FUNCTION__);
243 iface->dev.power.power_state.event = message.event;
244
245 /* When runtime PM is working, we'll set a flag to indicate
246 * whether we should autoresume when a SCSI request arrives. */
247
248 up(&us->dev_semaphore);
249 return 0;
250}
251
252static int storage_resume(struct usb_interface *iface)
253{
254 struct us_data *us = usb_get_intfdata(iface);
255
256 down(&us->dev_semaphore);
257
258 US_DEBUGP("%s\n", __FUNCTION__);
259 iface->dev.power.power_state.event = PM_EVENT_ON;
260
261 up(&us->dev_semaphore);
262 return 0;
263}
264
265#endif /* CONFIG_PM */
243 266
244/* 267/*
245 * fill_inquiry_response takes an unsigned char array (which must 268 * fill_inquiry_response takes an unsigned char array (which must
@@ -288,22 +311,7 @@ static int usb_stor_control_thread(void * __us)
288 struct us_data *us = (struct us_data *)__us; 311 struct us_data *us = (struct us_data *)__us;
289 struct Scsi_Host *host = us_to_host(us); 312 struct Scsi_Host *host = us_to_host(us);
290 313
291 lock_kernel();
292
293 /*
294 * This thread doesn't need any user-level access,
295 * so get rid of all our resources.
296 */
297 daemonize("usb-storage");
298 current->flags |= PF_NOFREEZE; 314 current->flags |= PF_NOFREEZE;
299 unlock_kernel();
300
301 /* acquire a reference to the host, so it won't be deallocated
302 * until we're ready to exit */
303 scsi_host_get(host);
304
305 /* signal that we've started the thread */
306 complete(&(us->notify));
307 315
308 for(;;) { 316 for(;;) {
309 US_DEBUGP("*** thread sleeping.\n"); 317 US_DEBUGP("*** thread sleeping.\n");
@@ -467,6 +475,12 @@ static int associate_dev(struct us_data *us, struct usb_interface *intf)
467 US_DEBUGP("I/O buffer allocation failed\n"); 475 US_DEBUGP("I/O buffer allocation failed\n");
468 return -ENOMEM; 476 return -ENOMEM;
469 } 477 }
478
479 us->sensebuf = kmalloc(US_SENSE_SIZE, GFP_KERNEL);
480 if (!us->sensebuf) {
481 US_DEBUGP("Sense buffer allocation failed\n");
482 return -ENOMEM;
483 }
470 return 0; 484 return 0;
471} 485}
472 486
@@ -555,8 +569,8 @@ static int get_transport(struct us_data *us)
555 break; 569 break;
556 570
557#ifdef CONFIG_USB_STORAGE_USBAT 571#ifdef CONFIG_USB_STORAGE_USBAT
558 case US_PR_SCM_ATAPI: 572 case US_PR_USBAT:
559 us->transport_name = "SCM/ATAPI"; 573 us->transport_name = "Shuttle USBAT";
560 us->transport = usbat_transport; 574 us->transport = usbat_transport;
561 us->transport_reset = usb_stor_CB_reset; 575 us->transport_reset = usb_stor_CB_reset;
562 us->max_lun = 1; 576 us->max_lun = 1;
@@ -740,6 +754,7 @@ static int get_pipes(struct us_data *us)
740static int usb_stor_acquire_resources(struct us_data *us) 754static int usb_stor_acquire_resources(struct us_data *us)
741{ 755{
742 int p; 756 int p;
757 struct task_struct *th;
743 758
744 us->current_urb = usb_alloc_urb(0, GFP_KERNEL); 759 us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
745 if (!us->current_urb) { 760 if (!us->current_urb) {
@@ -747,38 +762,28 @@ static int usb_stor_acquire_resources(struct us_data *us)
747 return -ENOMEM; 762 return -ENOMEM;
748 } 763 }
749 764
750 /* Lock the device while we carry out the next two operations */
751 down(&us->dev_semaphore);
752
753 /* For bulk-only devices, determine the max LUN value */
754 if (us->protocol == US_PR_BULK) {
755 p = usb_stor_Bulk_max_lun(us);
756 if (p < 0) {
757 up(&us->dev_semaphore);
758 return p;
759 }
760 us->max_lun = p;
761 }
762
763 /* Just before we start our control thread, initialize 765 /* Just before we start our control thread, initialize
764 * the device if it needs initialization */ 766 * the device if it needs initialization */
765 if (us->unusual_dev->initFunction) 767 if (us->unusual_dev->initFunction) {
766 us->unusual_dev->initFunction(us); 768 p = us->unusual_dev->initFunction(us);
767 769 if (p)
768 up(&us->dev_semaphore); 770 return p;
771 }
769 772
770 /* Start up our control thread */ 773 /* Start up our control thread */
771 p = kernel_thread(usb_stor_control_thread, us, CLONE_VM); 774 th = kthread_create(usb_stor_control_thread, us, "usb-storage");
772 if (p < 0) { 775 if (IS_ERR(th)) {
773 printk(KERN_WARNING USB_STORAGE 776 printk(KERN_WARNING USB_STORAGE
774 "Unable to start control thread\n"); 777 "Unable to start control thread\n");
775 return p; 778 return PTR_ERR(th);
776 } 779 }
777 us->pid = p;
778 atomic_inc(&total_threads);
779 780
780 /* Wait for the thread to start */ 781 /* Take a reference to the host for the control thread and
781 wait_for_completion(&(us->notify)); 782 * count it among all the threads we have launched. Then
783 * start it up. */
784 scsi_host_get(us_to_host(us));
785 atomic_inc(&total_threads);
786 wake_up_process(th);
782 787
783 return 0; 788 return 0;
784} 789}
@@ -812,6 +817,8 @@ static void dissociate_dev(struct us_data *us)
812{ 817{
813 US_DEBUGP("-- %s\n", __FUNCTION__); 818 US_DEBUGP("-- %s\n", __FUNCTION__);
814 819
820 kfree(us->sensebuf);
821
815 /* Free the device-related DMA-mapped buffers */ 822 /* Free the device-related DMA-mapped buffers */
816 if (us->cr) 823 if (us->cr)
817 usb_buffer_free(us->pusb_dev, sizeof(*us->cr), us->cr, 824 usb_buffer_free(us->pusb_dev, sizeof(*us->cr), us->cr,
@@ -872,21 +879,6 @@ static int usb_stor_scan_thread(void * __us)
872{ 879{
873 struct us_data *us = (struct us_data *)__us; 880 struct us_data *us = (struct us_data *)__us;
874 881
875 /*
876 * This thread doesn't need any user-level access,
877 * so get rid of all our resources.
878 */
879 lock_kernel();
880 daemonize("usb-stor-scan");
881 unlock_kernel();
882
883 /* Acquire a reference to the host, so it won't be deallocated
884 * until we're ready to exit */
885 scsi_host_get(us_to_host(us));
886
887 /* Signal that we've started the thread */
888 complete(&(us->notify));
889
890 printk(KERN_DEBUG 882 printk(KERN_DEBUG
891 "usb-storage: device found at %d\n", us->pusb_dev->devnum); 883 "usb-storage: device found at %d\n", us->pusb_dev->devnum);
892 884
@@ -904,6 +896,14 @@ retry:
904 896
905 /* If the device is still connected, perform the scanning */ 897 /* If the device is still connected, perform the scanning */
906 if (!test_bit(US_FLIDX_DISCONNECTING, &us->flags)) { 898 if (!test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
899
900 /* For bulk-only devices, determine the max LUN value */
901 if (us->protocol == US_PR_BULK &&
902 !(us->flags & US_FL_SINGLE_LUN)) {
903 down(&us->dev_semaphore);
904 us->max_lun = usb_stor_Bulk_max_lun(us);
905 up(&us->dev_semaphore);
906 }
907 scsi_scan_host(us_to_host(us)); 907 scsi_scan_host(us_to_host(us));
908 printk(KERN_DEBUG "usb-storage: device scan complete\n"); 908 printk(KERN_DEBUG "usb-storage: device scan complete\n");
909 909
@@ -923,6 +923,7 @@ static int storage_probe(struct usb_interface *intf,
923 struct us_data *us; 923 struct us_data *us;
924 const int id_index = id - storage_usb_ids; 924 const int id_index = id - storage_usb_ids;
925 int result; 925 int result;
926 struct task_struct *th;
926 927
927 US_DEBUGP("USB Mass Storage device detected\n"); 928 US_DEBUGP("USB Mass Storage device detected\n");
928 929
@@ -1003,17 +1004,21 @@ static int storage_probe(struct usb_interface *intf,
1003 } 1004 }
1004 1005
1005 /* Start up the thread for delayed SCSI-device scanning */ 1006 /* Start up the thread for delayed SCSI-device scanning */
1006 result = kernel_thread(usb_stor_scan_thread, us, CLONE_VM); 1007 th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
1007 if (result < 0) { 1008 if (IS_ERR(th)) {
1008 printk(KERN_WARNING USB_STORAGE 1009 printk(KERN_WARNING USB_STORAGE
1009 "Unable to start the device-scanning thread\n"); 1010 "Unable to start the device-scanning thread\n");
1010 quiesce_and_remove_host(us); 1011 quiesce_and_remove_host(us);
1012 result = PTR_ERR(th);
1011 goto BadDevice; 1013 goto BadDevice;
1012 } 1014 }
1013 atomic_inc(&total_threads);
1014 1015
1015 /* Wait for the thread to start */ 1016 /* Take a reference to the host for the scanning thread and
1016 wait_for_completion(&(us->notify)); 1017 * count it among all the threads we have launched. Then
1018 * start it up. */
1019 scsi_host_get(us_to_host(us));
1020 atomic_inc(&total_threads);
1021 wake_up_process(th);
1017 1022
1018 return 0; 1023 return 0;
1019 1024
@@ -1038,6 +1043,18 @@ static void storage_disconnect(struct usb_interface *intf)
1038 * Initialization and registration 1043 * Initialization and registration
1039 ***********************************************************************/ 1044 ***********************************************************************/
1040 1045
1046static struct usb_driver usb_storage_driver = {
1047 .owner = THIS_MODULE,
1048 .name = "usb-storage",
1049 .probe = storage_probe,
1050 .disconnect = storage_disconnect,
1051#ifdef CONFIG_PM
1052 .suspend = storage_suspend,
1053 .resume = storage_resume,
1054#endif
1055 .id_table = storage_usb_ids,
1056};
1057
1041static int __init usb_stor_init(void) 1058static int __init usb_stor_init(void)
1042{ 1059{
1043 int retval; 1060 int retval;
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index a195adae57b6..98b09711a739 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -117,6 +117,7 @@ enum { US_DO_ALL_FLAGS };
117 */ 117 */
118 118
119#define US_IOBUF_SIZE 64 /* Size of the DMA-mapped I/O buffer */ 119#define US_IOBUF_SIZE 64 /* Size of the DMA-mapped I/O buffer */
120#define US_SENSE_SIZE 18 /* Size of the autosense data buffer */
120 121
121typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*); 122typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*);
122typedef int (*trans_reset)(struct us_data*); 123typedef int (*trans_reset)(struct us_data*);
@@ -160,14 +161,12 @@ struct us_data {
160 struct scsi_cmnd *srb; /* current srb */ 161 struct scsi_cmnd *srb; /* current srb */
161 unsigned int tag; /* current dCBWTag */ 162 unsigned int tag; /* current dCBWTag */
162 163
163 /* thread information */
164 int pid; /* control thread */
165
166 /* control and bulk communications data */ 164 /* control and bulk communications data */
167 struct urb *current_urb; /* USB requests */ 165 struct urb *current_urb; /* USB requests */
168 struct usb_ctrlrequest *cr; /* control requests */ 166 struct usb_ctrlrequest *cr; /* control requests */
169 struct usb_sg_request current_sg; /* scatter-gather req. */ 167 struct usb_sg_request current_sg; /* scatter-gather req. */
170 unsigned char *iobuf; /* I/O buffer */ 168 unsigned char *iobuf; /* I/O buffer */
169 unsigned char *sensebuf; /* sense data buffer */
171 dma_addr_t cr_dma; /* buffer DMA addresses */ 170 dma_addr_t cr_dma; /* buffer DMA addresses */
172 dma_addr_t iobuf_dma; 171 dma_addr_t iobuf_dma;
173 172
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 353f24d45bc1..6c3a53f8f26c 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -223,9 +223,8 @@ static struct file_operations skel_fops = {
223 * and to have the device registered with devfs and the driver core 223 * and to have the device registered with devfs and the driver core
224 */ 224 */
225static struct usb_class_driver skel_class = { 225static struct usb_class_driver skel_class = {
226 .name = "usb/skel%d", 226 .name = "skel%d",
227 .fops = &skel_fops, 227 .fops = &skel_fops,
228 .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH,
229 .minor_base = USB_SKEL_MINOR_BASE, 228 .minor_base = USB_SKEL_MINOR_BASE,
230}; 229};
231 230
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-24 11:40:25 -0500