diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/Kconfig | 71 | ||||
-rw-r--r-- | drivers/net/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/ibm_emac/Kconfig | 70 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/Kconfig | 63 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/Makefile | 11 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/core.c | 2907 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/core.h | 355 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/debug.c | 238 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/debug.h | 78 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/emac.h | 268 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/mal.c | 728 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/mal.h | 276 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/phy.c | 373 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/phy.h | 80 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/rgmii.c | 323 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/rgmii.h | 76 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/tah.c | 173 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/tah.h | 90 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/zmii.c | 322 | ||||
-rw-r--r-- | drivers/net/ibm_newemac/zmii.h | 73 |
20 files changed, 6507 insertions, 69 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 9dc4a80a6acd..cfa97f3fbebd 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig | |||
@@ -1247,75 +1247,8 @@ config IBMVETH | |||
1247 | <file:Documentation/networking/net-modules.txt>. The module will | 1247 | <file:Documentation/networking/net-modules.txt>. The module will |
1248 | be called ibmveth. | 1248 | be called ibmveth. |
1249 | 1249 | ||
1250 | config IBM_EMAC | 1250 | source "drivers/net/ibm_emac/Kconfig" |
1251 | tristate "PowerPC 4xx on-chip Ethernet support" | 1251 | source "drivers/net/ibm_newemac/Kconfig" |
1252 | depends on 4xx && !PPC_MERGE | ||
1253 | help | ||
1254 | This driver supports the PowerPC 4xx EMAC family of on-chip | ||
1255 | Ethernet controllers. | ||
1256 | |||
1257 | config IBM_EMAC_RXB | ||
1258 | int "Number of receive buffers" | ||
1259 | depends on IBM_EMAC | ||
1260 | default "128" | ||
1261 | |||
1262 | config IBM_EMAC_TXB | ||
1263 | int "Number of transmit buffers" | ||
1264 | depends on IBM_EMAC | ||
1265 | default "64" | ||
1266 | |||
1267 | config IBM_EMAC_POLL_WEIGHT | ||
1268 | int "MAL NAPI polling weight" | ||
1269 | depends on IBM_EMAC | ||
1270 | default "32" | ||
1271 | |||
1272 | config IBM_EMAC_RX_COPY_THRESHOLD | ||
1273 | int "RX skb copy threshold (bytes)" | ||
1274 | depends on IBM_EMAC | ||
1275 | default "256" | ||
1276 | |||
1277 | config IBM_EMAC_RX_SKB_HEADROOM | ||
1278 | int "Additional RX skb headroom (bytes)" | ||
1279 | depends on IBM_EMAC | ||
1280 | default "0" | ||
1281 | help | ||
1282 | Additional receive skb headroom. Note, that driver | ||
1283 | will always reserve at least 2 bytes to make IP header | ||
1284 | aligned, so usually there is no need to add any additional | ||
1285 | headroom. | ||
1286 | |||
1287 | If unsure, set to 0. | ||
1288 | |||
1289 | config IBM_EMAC_PHY_RX_CLK_FIX | ||
1290 | bool "PHY Rx clock workaround" | ||
1291 | depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR) | ||
1292 | help | ||
1293 | Enable this if EMAC attached to a PHY which doesn't generate | ||
1294 | RX clock if there is no link, if this is the case, you will | ||
1295 | see "TX disable timeout" or "RX disable timeout" in the system | ||
1296 | log. | ||
1297 | |||
1298 | If unsure, say N. | ||
1299 | |||
1300 | config IBM_EMAC_DEBUG | ||
1301 | bool "Debugging" | ||
1302 | depends on IBM_EMAC | ||
1303 | default n | ||
1304 | |||
1305 | config IBM_EMAC_ZMII | ||
1306 | bool | ||
1307 | depends on IBM_EMAC && (NP405H || NP405L || 44x) | ||
1308 | default y | ||
1309 | |||
1310 | config IBM_EMAC_RGMII | ||
1311 | bool | ||
1312 | depends on IBM_EMAC && 440GX | ||
1313 | default y | ||
1314 | |||
1315 | config IBM_EMAC_TAH | ||
1316 | bool | ||
1317 | depends on IBM_EMAC && 440GX | ||
1318 | default y | ||
1319 | 1252 | ||
1320 | config NET_PCI | 1253 | config NET_PCI |
1321 | bool "EISA, VLB, PCI and on board controllers" | 1254 | bool "EISA, VLB, PCI and on board controllers" |
diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 2ab33e8b9159..9cbef5829870 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile | |||
@@ -5,6 +5,7 @@ | |||
5 | obj-$(CONFIG_E1000) += e1000/ | 5 | obj-$(CONFIG_E1000) += e1000/ |
6 | obj-$(CONFIG_E1000E) += e1000e/ | 6 | obj-$(CONFIG_E1000E) += e1000e/ |
7 | obj-$(CONFIG_IBM_EMAC) += ibm_emac/ | 7 | obj-$(CONFIG_IBM_EMAC) += ibm_emac/ |
8 | obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/ | ||
8 | obj-$(CONFIG_IXGBE) += ixgbe/ | 9 | obj-$(CONFIG_IXGBE) += ixgbe/ |
9 | obj-$(CONFIG_IXGB) += ixgb/ | 10 | obj-$(CONFIG_IXGB) += ixgb/ |
10 | obj-$(CONFIG_IP1000) += ipg.o | 11 | obj-$(CONFIG_IP1000) += ipg.o |
diff --git a/drivers/net/ibm_emac/Kconfig b/drivers/net/ibm_emac/Kconfig new file mode 100644 index 000000000000..f61c48047dc0 --- /dev/null +++ b/drivers/net/ibm_emac/Kconfig | |||
@@ -0,0 +1,70 @@ | |||
1 | config IBM_EMAC | ||
2 | tristate "PowerPC 4xx on-chip Ethernet support" | ||
3 | depends on 4xx && !PPC_MERGE | ||
4 | help | ||
5 | This driver supports the PowerPC 4xx EMAC family of on-chip | ||
6 | Ethernet controllers. | ||
7 | |||
8 | config IBM_EMAC_RXB | ||
9 | int "Number of receive buffers" | ||
10 | depends on IBM_EMAC | ||
11 | default "128" | ||
12 | |||
13 | config IBM_EMAC_TXB | ||
14 | int "Number of transmit buffers" | ||
15 | depends on IBM_EMAC | ||
16 | default "64" | ||
17 | |||
18 | config IBM_EMAC_POLL_WEIGHT | ||
19 | int "MAL NAPI polling weight" | ||
20 | depends on IBM_EMAC | ||
21 | default "32" | ||
22 | |||
23 | config IBM_EMAC_RX_COPY_THRESHOLD | ||
24 | int "RX skb copy threshold (bytes)" | ||
25 | depends on IBM_EMAC | ||
26 | default "256" | ||
27 | |||
28 | config IBM_EMAC_RX_SKB_HEADROOM | ||
29 | int "Additional RX skb headroom (bytes)" | ||
30 | depends on IBM_EMAC | ||
31 | default "0" | ||
32 | help | ||
33 | Additional receive skb headroom. Note, that driver | ||
34 | will always reserve at least 2 bytes to make IP header | ||
35 | aligned, so usually there is no need to add any additional | ||
36 | headroom. | ||
37 | |||
38 | If unsure, set to 0. | ||
39 | |||
40 | config IBM_EMAC_PHY_RX_CLK_FIX | ||
41 | bool "PHY Rx clock workaround" | ||
42 | depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR) | ||
43 | help | ||
44 | Enable this if EMAC attached to a PHY which doesn't generate | ||
45 | RX clock if there is no link, if this is the case, you will | ||
46 | see "TX disable timeout" or "RX disable timeout" in the system | ||
47 | log. | ||
48 | |||
49 | If unsure, say N. | ||
50 | |||
51 | config IBM_EMAC_DEBUG | ||
52 | bool "Debugging" | ||
53 | depends on IBM_EMAC | ||
54 | default n | ||
55 | |||
56 | config IBM_EMAC_ZMII | ||
57 | bool | ||
58 | depends on IBM_EMAC && (NP405H || NP405L || 44x) | ||
59 | default y | ||
60 | |||
61 | config IBM_EMAC_RGMII | ||
62 | bool | ||
63 | depends on IBM_EMAC && 440GX | ||
64 | default y | ||
65 | |||
66 | config IBM_EMAC_TAH | ||
67 | bool | ||
68 | depends on IBM_EMAC && 440GX | ||
69 | default y | ||
70 | |||
diff --git a/drivers/net/ibm_newemac/Kconfig b/drivers/net/ibm_newemac/Kconfig new file mode 100644 index 000000000000..0d3e7380bad0 --- /dev/null +++ b/drivers/net/ibm_newemac/Kconfig | |||
@@ -0,0 +1,63 @@ | |||
1 | config IBM_NEW_EMAC | ||
2 | tristate "IBM EMAC Ethernet support" | ||
3 | depends on PPC_DCR && PPC_MERGE | ||
4 | help | ||
5 | This driver supports the IBM EMAC family of Ethernet controllers | ||
6 | typically found on 4xx embedded PowerPC chips, but also on the | ||
7 | Axon southbridge for Cell. | ||
8 | |||
9 | config IBM_NEW_EMAC_RXB | ||
10 | int "Number of receive buffers" | ||
11 | depends on IBM_NEW_EMAC | ||
12 | default "128" | ||
13 | |||
14 | config IBM_NEW_EMAC_TXB | ||
15 | int "Number of transmit buffers" | ||
16 | depends on IBM_NEW_EMAC | ||
17 | default "64" | ||
18 | |||
19 | config IBM_NEW_EMAC_POLL_WEIGHT | ||
20 | int "MAL NAPI polling weight" | ||
21 | depends on IBM_NEW_EMAC | ||
22 | default "32" | ||
23 | |||
24 | config IBM_NEW_EMAC_RX_COPY_THRESHOLD | ||
25 | int "RX skb copy threshold (bytes)" | ||
26 | depends on IBM_NEW_EMAC | ||
27 | default "256" | ||
28 | |||
29 | config IBM_NEW_EMAC_RX_SKB_HEADROOM | ||
30 | int "Additional RX skb headroom (bytes)" | ||
31 | depends on IBM_NEW_EMAC | ||
32 | default "0" | ||
33 | help | ||
34 | Additional receive skb headroom. Note, that driver | ||
35 | will always reserve at least 2 bytes to make IP header | ||
36 | aligned, so usually there is no need to add any additional | ||
37 | headroom. | ||
38 | |||
39 | If unsure, set to 0. | ||
40 | |||
41 | config IBM_NEW_EMAC_DEBUG | ||
42 | bool "Debugging" | ||
43 | depends on IBM_NEW_EMAC | ||
44 | default n | ||
45 | |||
46 | # The options below has to be select'ed by the respective | ||
47 | # processor types or platforms | ||
48 | |||
49 | config IBM_NEW_EMAC_ZMII | ||
50 | bool | ||
51 | default n | ||
52 | |||
53 | config IBM_NEW_EMAC_RGMII | ||
54 | bool | ||
55 | default n | ||
56 | |||
57 | config IBM_NEW_EMAC_TAH | ||
58 | bool | ||
59 | default n | ||
60 | |||
61 | config IBM_NEW_EMAC_EMAC4 | ||
62 | bool | ||
63 | default n | ||
diff --git a/drivers/net/ibm_newemac/Makefile b/drivers/net/ibm_newemac/Makefile new file mode 100644 index 000000000000..0b5c99512762 --- /dev/null +++ b/drivers/net/ibm_newemac/Makefile | |||
@@ -0,0 +1,11 @@ | |||
1 | # | ||
2 | # Makefile for the PowerPC 4xx on-chip ethernet driver | ||
3 | # | ||
4 | |||
5 | obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac.o | ||
6 | |||
7 | ibm_newemac-y := mal.o core.o phy.o | ||
8 | ibm_newemac-$(CONFIG_IBM_NEW_EMAC_ZMII) += zmii.o | ||
9 | ibm_newemac-$(CONFIG_IBM_NEW_EMAC_RGMII) += rgmii.o | ||
10 | ibm_newemac-$(CONFIG_IBM_NEW_EMAC_TAH) += tah.o | ||
11 | ibm_newemac-$(CONFIG_IBM_NEW_EMAC_DEBUG) += debug.o | ||
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c new file mode 100644 index 000000000000..653bfdc291e0 --- /dev/null +++ b/drivers/net/ibm_newemac/core.c | |||
@@ -0,0 +1,2907 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_newemac/core.c | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller. | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Matt Porter <mporter@kernel.crashing.org> | ||
11 | * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org> | ||
12 | * Armin Kuster <akuster@mvista.com> | ||
13 | * Johnnie Peters <jpeters@mvista.com> | ||
14 | * | ||
15 | * This program is free software; you can redistribute it and/or modify it | ||
16 | * under the terms of the GNU General Public License as published by the | ||
17 | * Free Software Foundation; either version 2 of the License, or (at your | ||
18 | * option) any later version. | ||
19 | * | ||
20 | */ | ||
21 | |||
22 | #include <linux/sched.h> | ||
23 | #include <linux/string.h> | ||
24 | #include <linux/errno.h> | ||
25 | #include <linux/delay.h> | ||
26 | #include <linux/types.h> | ||
27 | #include <linux/pci.h> | ||
28 | #include <linux/etherdevice.h> | ||
29 | #include <linux/skbuff.h> | ||
30 | #include <linux/crc32.h> | ||
31 | #include <linux/ethtool.h> | ||
32 | #include <linux/mii.h> | ||
33 | #include <linux/bitops.h> | ||
34 | #include <linux/workqueue.h> | ||
35 | |||
36 | #include <asm/processor.h> | ||
37 | #include <asm/io.h> | ||
38 | #include <asm/dma.h> | ||
39 | #include <asm/uaccess.h> | ||
40 | |||
41 | #include "core.h" | ||
42 | |||
43 | /* | ||
44 | * Lack of dma_unmap_???? calls is intentional. | ||
45 | * | ||
46 | * API-correct usage requires additional support state information to be | ||
47 | * maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to | ||
48 | * EMAC design (e.g. TX buffer passed from network stack can be split into | ||
49 | * several BDs, dma_map_single/dma_map_page can be used to map particular BD), | ||
50 | * maintaining such information will add additional overhead. | ||
51 | * Current DMA API implementation for 4xx processors only ensures cache coherency | ||
52 | * and dma_unmap_???? routines are empty and are likely to stay this way. | ||
53 | * I decided to omit dma_unmap_??? calls because I don't want to add additional | ||
54 | * complexity just for the sake of following some abstract API, when it doesn't | ||
55 | * add any real benefit to the driver. I understand that this decision maybe | ||
56 | * controversial, but I really tried to make code API-correct and efficient | ||
57 | * at the same time and didn't come up with code I liked :(. --ebs | ||
58 | */ | ||
59 | |||
60 | #define DRV_NAME "emac" | ||
61 | #define DRV_VERSION "3.54" | ||
62 | #define DRV_DESC "PPC 4xx OCP EMAC driver" | ||
63 | |||
64 | MODULE_DESCRIPTION(DRV_DESC); | ||
65 | MODULE_AUTHOR | ||
66 | ("Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>"); | ||
67 | MODULE_LICENSE("GPL"); | ||
68 | |||
69 | /* | ||
70 | * PPC64 doesn't (yet) have a cacheable_memcpy | ||
71 | */ | ||
72 | #ifdef CONFIG_PPC64 | ||
73 | #define cacheable_memcpy(d,s,n) memcpy((d),(s),(n)) | ||
74 | #endif | ||
75 | |||
76 | /* minimum number of free TX descriptors required to wake up TX process */ | ||
77 | #define EMAC_TX_WAKEUP_THRESH (NUM_TX_BUFF / 4) | ||
78 | |||
79 | /* If packet size is less than this number, we allocate small skb and copy packet | ||
80 | * contents into it instead of just sending original big skb up | ||
81 | */ | ||
82 | #define EMAC_RX_COPY_THRESH CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD | ||
83 | |||
84 | /* Since multiple EMACs share MDIO lines in various ways, we need | ||
85 | * to avoid re-using the same PHY ID in cases where the arch didn't | ||
86 | * setup precise phy_map entries | ||
87 | * | ||
88 | * XXX This is something that needs to be reworked as we can have multiple | ||
89 | * EMAC "sets" (multiple ASICs containing several EMACs) though we can | ||
90 | * probably require in that case to have explicit PHY IDs in the device-tree | ||
91 | */ | ||
92 | static u32 busy_phy_map; | ||
93 | static DEFINE_MUTEX(emac_phy_map_lock); | ||
94 | |||
95 | /* This is the wait queue used to wait on any event related to probe, that | ||
96 | * is discovery of MALs, other EMACs, ZMII/RGMIIs, etc... | ||
97 | */ | ||
98 | static DECLARE_WAIT_QUEUE_HEAD(emac_probe_wait); | ||
99 | |||
100 | /* Having stable interface names is a doomed idea. However, it would be nice | ||
101 | * if we didn't have completely random interface names at boot too :-) It's | ||
102 | * just a matter of making everybody's life easier. Since we are doing | ||
103 | * threaded probing, it's a bit harder though. The base idea here is that | ||
104 | * we make up a list of all emacs in the device-tree before we register the | ||
105 | * driver. Every emac will then wait for the previous one in the list to | ||
106 | * initialize before itself. We should also keep that list ordered by | ||
107 | * cell_index. | ||
108 | * That list is only 4 entries long, meaning that additional EMACs don't | ||
109 | * get ordering guarantees unless EMAC_BOOT_LIST_SIZE is increased. | ||
110 | */ | ||
111 | |||
112 | #define EMAC_BOOT_LIST_SIZE 4 | ||
113 | static struct device_node *emac_boot_list[EMAC_BOOT_LIST_SIZE]; | ||
114 | |||
115 | /* How long should I wait for dependent devices ? */ | ||
116 | #define EMAC_PROBE_DEP_TIMEOUT (HZ * 5) | ||
117 | |||
118 | /* I don't want to litter system log with timeout errors | ||
119 | * when we have brain-damaged PHY. | ||
120 | */ | ||
121 | static inline void emac_report_timeout_error(struct emac_instance *dev, | ||
122 | const char *error) | ||
123 | { | ||
124 | if (net_ratelimit()) | ||
125 | printk(KERN_ERR "%s: %s\n", dev->ndev->name, error); | ||
126 | } | ||
127 | |||
128 | /* PHY polling intervals */ | ||
129 | #define PHY_POLL_LINK_ON HZ | ||
130 | #define PHY_POLL_LINK_OFF (HZ / 5) | ||
131 | |||
132 | /* Graceful stop timeouts in us. | ||
133 | * We should allow up to 1 frame time (full-duplex, ignoring collisions) | ||
134 | */ | ||
135 | #define STOP_TIMEOUT_10 1230 | ||
136 | #define STOP_TIMEOUT_100 124 | ||
137 | #define STOP_TIMEOUT_1000 13 | ||
138 | #define STOP_TIMEOUT_1000_JUMBO 73 | ||
139 | |||
140 | /* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */ | ||
141 | static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = { | ||
142 | "rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum", | ||
143 | "tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom", | ||
144 | "rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu", | ||
145 | "rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet", | ||
146 | "rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error", | ||
147 | "rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range", | ||
148 | "rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun", | ||
149 | "rx_bad_packet", "rx_runt_packet", "rx_short_event", | ||
150 | "rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long", | ||
151 | "rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors", | ||
152 | "tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral", | ||
153 | "tx_bd_excessive_collisions", "tx_bd_late_collision", | ||
154 | "tx_bd_multple_collisions", "tx_bd_single_collision", | ||
155 | "tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe", | ||
156 | "tx_errors" | ||
157 | }; | ||
158 | |||
159 | static irqreturn_t emac_irq(int irq, void *dev_instance); | ||
160 | static void emac_clean_tx_ring(struct emac_instance *dev); | ||
161 | static void __emac_set_multicast_list(struct emac_instance *dev); | ||
162 | |||
163 | static inline int emac_phy_supports_gige(int phy_mode) | ||
164 | { | ||
165 | return phy_mode == PHY_MODE_GMII || | ||
166 | phy_mode == PHY_MODE_RGMII || | ||
167 | phy_mode == PHY_MODE_TBI || | ||
168 | phy_mode == PHY_MODE_RTBI; | ||
169 | } | ||
170 | |||
171 | static inline int emac_phy_gpcs(int phy_mode) | ||
172 | { | ||
173 | return phy_mode == PHY_MODE_TBI || | ||
174 | phy_mode == PHY_MODE_RTBI; | ||
175 | } | ||
176 | |||
177 | static inline void emac_tx_enable(struct emac_instance *dev) | ||
178 | { | ||
179 | struct emac_regs __iomem *p = dev->emacp; | ||
180 | u32 r; | ||
181 | |||
182 | DBG(dev, "tx_enable" NL); | ||
183 | |||
184 | r = in_be32(&p->mr0); | ||
185 | if (!(r & EMAC_MR0_TXE)) | ||
186 | out_be32(&p->mr0, r | EMAC_MR0_TXE); | ||
187 | } | ||
188 | |||
189 | static void emac_tx_disable(struct emac_instance *dev) | ||
190 | { | ||
191 | struct emac_regs __iomem *p = dev->emacp; | ||
192 | u32 r; | ||
193 | |||
194 | DBG(dev, "tx_disable" NL); | ||
195 | |||
196 | r = in_be32(&p->mr0); | ||
197 | if (r & EMAC_MR0_TXE) { | ||
198 | int n = dev->stop_timeout; | ||
199 | out_be32(&p->mr0, r & ~EMAC_MR0_TXE); | ||
200 | while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n) { | ||
201 | udelay(1); | ||
202 | --n; | ||
203 | } | ||
204 | if (unlikely(!n)) | ||
205 | emac_report_timeout_error(dev, "TX disable timeout"); | ||
206 | } | ||
207 | } | ||
208 | |||
209 | static void emac_rx_enable(struct emac_instance *dev) | ||
210 | { | ||
211 | struct emac_regs __iomem *p = dev->emacp; | ||
212 | u32 r; | ||
213 | |||
214 | if (unlikely(test_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags))) | ||
215 | goto out; | ||
216 | |||
217 | DBG(dev, "rx_enable" NL); | ||
218 | |||
219 | r = in_be32(&p->mr0); | ||
220 | if (!(r & EMAC_MR0_RXE)) { | ||
221 | if (unlikely(!(r & EMAC_MR0_RXI))) { | ||
222 | /* Wait if previous async disable is still in progress */ | ||
223 | int n = dev->stop_timeout; | ||
224 | while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n) { | ||
225 | udelay(1); | ||
226 | --n; | ||
227 | } | ||
228 | if (unlikely(!n)) | ||
229 | emac_report_timeout_error(dev, | ||
230 | "RX disable timeout"); | ||
231 | } | ||
232 | out_be32(&p->mr0, r | EMAC_MR0_RXE); | ||
233 | } | ||
234 | out: | ||
235 | ; | ||
236 | } | ||
237 | |||
238 | static void emac_rx_disable(struct emac_instance *dev) | ||
239 | { | ||
240 | struct emac_regs __iomem *p = dev->emacp; | ||
241 | u32 r; | ||
242 | |||
243 | DBG(dev, "rx_disable" NL); | ||
244 | |||
245 | r = in_be32(&p->mr0); | ||
246 | if (r & EMAC_MR0_RXE) { | ||
247 | int n = dev->stop_timeout; | ||
248 | out_be32(&p->mr0, r & ~EMAC_MR0_RXE); | ||
249 | while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n) { | ||
250 | udelay(1); | ||
251 | --n; | ||
252 | } | ||
253 | if (unlikely(!n)) | ||
254 | emac_report_timeout_error(dev, "RX disable timeout"); | ||
255 | } | ||
256 | } | ||
257 | |||
258 | static inline void emac_netif_stop(struct emac_instance *dev) | ||
259 | { | ||
260 | netif_tx_lock_bh(dev->ndev); | ||
261 | dev->no_mcast = 1; | ||
262 | netif_tx_unlock_bh(dev->ndev); | ||
263 | dev->ndev->trans_start = jiffies; /* prevent tx timeout */ | ||
264 | mal_poll_disable(dev->mal, &dev->commac); | ||
265 | netif_tx_disable(dev->ndev); | ||
266 | } | ||
267 | |||
268 | static inline void emac_netif_start(struct emac_instance *dev) | ||
269 | { | ||
270 | netif_tx_lock_bh(dev->ndev); | ||
271 | dev->no_mcast = 0; | ||
272 | if (dev->mcast_pending && netif_running(dev->ndev)) | ||
273 | __emac_set_multicast_list(dev); | ||
274 | netif_tx_unlock_bh(dev->ndev); | ||
275 | |||
276 | netif_wake_queue(dev->ndev); | ||
277 | |||
278 | /* NOTE: unconditional netif_wake_queue is only appropriate | ||
279 | * so long as all callers are assured to have free tx slots | ||
280 | * (taken from tg3... though the case where that is wrong is | ||
281 | * not terribly harmful) | ||
282 | */ | ||
283 | mal_poll_enable(dev->mal, &dev->commac); | ||
284 | } | ||
285 | |||
286 | static inline void emac_rx_disable_async(struct emac_instance *dev) | ||
287 | { | ||
288 | struct emac_regs __iomem *p = dev->emacp; | ||
289 | u32 r; | ||
290 | |||
291 | DBG(dev, "rx_disable_async" NL); | ||
292 | |||
293 | r = in_be32(&p->mr0); | ||
294 | if (r & EMAC_MR0_RXE) | ||
295 | out_be32(&p->mr0, r & ~EMAC_MR0_RXE); | ||
296 | } | ||
297 | |||
298 | static int emac_reset(struct emac_instance *dev) | ||
299 | { | ||
300 | struct emac_regs __iomem *p = dev->emacp; | ||
301 | int n = 20; | ||
302 | |||
303 | DBG(dev, "reset" NL); | ||
304 | |||
305 | if (!dev->reset_failed) { | ||
306 | /* 40x erratum suggests stopping RX channel before reset, | ||
307 | * we stop TX as well | ||
308 | */ | ||
309 | emac_rx_disable(dev); | ||
310 | emac_tx_disable(dev); | ||
311 | } | ||
312 | |||
313 | out_be32(&p->mr0, EMAC_MR0_SRST); | ||
314 | while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n) | ||
315 | --n; | ||
316 | |||
317 | if (n) { | ||
318 | dev->reset_failed = 0; | ||
319 | return 0; | ||
320 | } else { | ||
321 | emac_report_timeout_error(dev, "reset timeout"); | ||
322 | dev->reset_failed = 1; | ||
323 | return -ETIMEDOUT; | ||
324 | } | ||
325 | } | ||
326 | |||
327 | static void emac_hash_mc(struct emac_instance *dev) | ||
328 | { | ||
329 | struct emac_regs __iomem *p = dev->emacp; | ||
330 | u16 gaht[4] = { 0 }; | ||
331 | struct dev_mc_list *dmi; | ||
332 | |||
333 | DBG(dev, "hash_mc %d" NL, dev->ndev->mc_count); | ||
334 | |||
335 | for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) { | ||
336 | int bit; | ||
337 | DBG2(dev, "mc %02x:%02x:%02x:%02x:%02x:%02x" NL, | ||
338 | dmi->dmi_addr[0], dmi->dmi_addr[1], dmi->dmi_addr[2], | ||
339 | dmi->dmi_addr[3], dmi->dmi_addr[4], dmi->dmi_addr[5]); | ||
340 | |||
341 | bit = 63 - (ether_crc(ETH_ALEN, dmi->dmi_addr) >> 26); | ||
342 | gaht[bit >> 4] |= 0x8000 >> (bit & 0x0f); | ||
343 | } | ||
344 | out_be32(&p->gaht1, gaht[0]); | ||
345 | out_be32(&p->gaht2, gaht[1]); | ||
346 | out_be32(&p->gaht3, gaht[2]); | ||
347 | out_be32(&p->gaht4, gaht[3]); | ||
348 | } | ||
349 | |||
350 | static inline u32 emac_iff2rmr(struct net_device *ndev) | ||
351 | { | ||
352 | struct emac_instance *dev = netdev_priv(ndev); | ||
353 | u32 r; | ||
354 | |||
355 | r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE; | ||
356 | |||
357 | if (emac_has_feature(dev, EMAC_FTR_EMAC4)) | ||
358 | r |= EMAC4_RMR_BASE; | ||
359 | else | ||
360 | r |= EMAC_RMR_BASE; | ||
361 | |||
362 | if (ndev->flags & IFF_PROMISC) | ||
363 | r |= EMAC_RMR_PME; | ||
364 | else if (ndev->flags & IFF_ALLMULTI || ndev->mc_count > 32) | ||
365 | r |= EMAC_RMR_PMME; | ||
366 | else if (ndev->mc_count > 0) | ||
367 | r |= EMAC_RMR_MAE; | ||
368 | |||
369 | return r; | ||
370 | } | ||
371 | |||
372 | static u32 __emac_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_size) | ||
373 | { | ||
374 | u32 ret = EMAC_MR1_VLE | EMAC_MR1_IST | EMAC_MR1_TR0_MULT; | ||
375 | |||
376 | DBG2(dev, "__emac_calc_base_mr1" NL); | ||
377 | |||
378 | switch(tx_size) { | ||
379 | case 2048: | ||
380 | ret |= EMAC_MR1_TFS_2K; | ||
381 | break; | ||
382 | default: | ||
383 | printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", | ||
384 | dev->ndev->name, tx_size); | ||
385 | } | ||
386 | |||
387 | switch(rx_size) { | ||
388 | case 16384: | ||
389 | ret |= EMAC_MR1_RFS_16K; | ||
390 | break; | ||
391 | case 4096: | ||
392 | ret |= EMAC_MR1_RFS_4K; | ||
393 | break; | ||
394 | default: | ||
395 | printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", | ||
396 | dev->ndev->name, rx_size); | ||
397 | } | ||
398 | |||
399 | return ret; | ||
400 | } | ||
401 | |||
402 | static u32 __emac4_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_size) | ||
403 | { | ||
404 | u32 ret = EMAC_MR1_VLE | EMAC_MR1_IST | EMAC4_MR1_TR | | ||
405 | EMAC4_MR1_OBCI(dev->opb_bus_freq); | ||
406 | |||
407 | DBG2(dev, "__emac4_calc_base_mr1" NL); | ||
408 | |||
409 | switch(tx_size) { | ||
410 | case 4096: | ||
411 | ret |= EMAC4_MR1_TFS_4K; | ||
412 | break; | ||
413 | case 2048: | ||
414 | ret |= EMAC4_MR1_TFS_2K; | ||
415 | break; | ||
416 | default: | ||
417 | printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", | ||
418 | dev->ndev->name, tx_size); | ||
419 | } | ||
420 | |||
421 | switch(rx_size) { | ||
422 | case 16384: | ||
423 | ret |= EMAC4_MR1_RFS_16K; | ||
424 | break; | ||
425 | case 4096: | ||
426 | ret |= EMAC4_MR1_RFS_4K; | ||
427 | break; | ||
428 | case 2048: | ||
429 | ret |= EMAC4_MR1_RFS_2K; | ||
430 | break; | ||
431 | default: | ||
432 | printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n", | ||
433 | dev->ndev->name, rx_size); | ||
434 | } | ||
435 | |||
436 | return ret; | ||
437 | } | ||
438 | |||
439 | static u32 emac_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_size) | ||
440 | { | ||
441 | return emac_has_feature(dev, EMAC_FTR_EMAC4) ? | ||
442 | __emac4_calc_base_mr1(dev, tx_size, rx_size) : | ||
443 | __emac_calc_base_mr1(dev, tx_size, rx_size); | ||
444 | } | ||
445 | |||
446 | static inline u32 emac_calc_trtr(struct emac_instance *dev, unsigned int size) | ||
447 | { | ||
448 | if (emac_has_feature(dev, EMAC_FTR_EMAC4)) | ||
449 | return ((size >> 6) - 1) << EMAC_TRTR_SHIFT_EMAC4; | ||
450 | else | ||
451 | return ((size >> 6) - 1) << EMAC_TRTR_SHIFT; | ||
452 | } | ||
453 | |||
454 | static inline u32 emac_calc_rwmr(struct emac_instance *dev, | ||
455 | unsigned int low, unsigned int high) | ||
456 | { | ||
457 | if (emac_has_feature(dev, EMAC_FTR_EMAC4)) | ||
458 | return (low << 22) | ( (high & 0x3ff) << 6); | ||
459 | else | ||
460 | return (low << 23) | ( (high & 0x1ff) << 7); | ||
461 | } | ||
462 | |||
463 | static int emac_configure(struct emac_instance *dev) | ||
464 | { | ||
465 | struct emac_regs __iomem *p = dev->emacp; | ||
466 | struct net_device *ndev = dev->ndev; | ||
467 | int tx_size, rx_size; | ||
468 | u32 r, mr1 = 0; | ||
469 | |||
470 | DBG(dev, "configure" NL); | ||
471 | |||
472 | if (emac_reset(dev) < 0) | ||
473 | return -ETIMEDOUT; | ||
474 | |||
475 | if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) | ||
476 | tah_reset(dev->tah_dev); | ||
477 | |||
478 | DBG(dev, " duplex = %d, pause = %d, asym_pause = %d\n", | ||
479 | dev->phy.duplex, dev->phy.pause, dev->phy.asym_pause); | ||
480 | |||
481 | /* Default fifo sizes */ | ||
482 | tx_size = dev->tx_fifo_size; | ||
483 | rx_size = dev->rx_fifo_size; | ||
484 | |||
485 | /* Check for full duplex */ | ||
486 | if (dev->phy.duplex == DUPLEX_FULL) | ||
487 | mr1 |= EMAC_MR1_FDE | EMAC_MR1_MWSW_001; | ||
488 | |||
489 | /* Adjust fifo sizes, mr1 and timeouts based on link speed */ | ||
490 | dev->stop_timeout = STOP_TIMEOUT_10; | ||
491 | switch (dev->phy.speed) { | ||
492 | case SPEED_1000: | ||
493 | if (emac_phy_gpcs(dev->phy.mode)) { | ||
494 | mr1 |= EMAC_MR1_MF_1000GPCS | | ||
495 | EMAC_MR1_MF_IPPA(dev->phy.address); | ||
496 | |||
497 | /* Put some arbitrary OUI, Manuf & Rev IDs so we can | ||
498 | * identify this GPCS PHY later. | ||
499 | */ | ||
500 | out_be32(&p->ipcr, 0xdeadbeef); | ||
501 | } else | ||
502 | mr1 |= EMAC_MR1_MF_1000; | ||
503 | |||
504 | /* Extended fifo sizes */ | ||
505 | tx_size = dev->tx_fifo_size_gige; | ||
506 | rx_size = dev->rx_fifo_size_gige; | ||
507 | |||
508 | if (dev->ndev->mtu > ETH_DATA_LEN) { | ||
509 | mr1 |= EMAC_MR1_JPSM; | ||
510 | dev->stop_timeout = STOP_TIMEOUT_1000_JUMBO; | ||
511 | } else | ||
512 | dev->stop_timeout = STOP_TIMEOUT_1000; | ||
513 | break; | ||
514 | case SPEED_100: | ||
515 | mr1 |= EMAC_MR1_MF_100; | ||
516 | dev->stop_timeout = STOP_TIMEOUT_100; | ||
517 | break; | ||
518 | default: /* make gcc happy */ | ||
519 | break; | ||
520 | } | ||
521 | |||
522 | if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) | ||
523 | rgmii_set_speed(dev->rgmii_dev, dev->rgmii_port, | ||
524 | dev->phy.speed); | ||
525 | if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) | ||
526 | zmii_set_speed(dev->zmii_dev, dev->zmii_port, dev->phy.speed); | ||
527 | |||
528 | /* on 40x erratum forces us to NOT use integrated flow control, | ||
529 | * let's hope it works on 44x ;) | ||
530 | */ | ||
531 | if (!emac_has_feature(dev, EMAC_FTR_NO_FLOW_CONTROL_40x) && | ||
532 | dev->phy.duplex == DUPLEX_FULL) { | ||
533 | if (dev->phy.pause) | ||
534 | mr1 |= EMAC_MR1_EIFC | EMAC_MR1_APP; | ||
535 | else if (dev->phy.asym_pause) | ||
536 | mr1 |= EMAC_MR1_APP; | ||
537 | } | ||
538 | |||
539 | /* Add base settings & fifo sizes & program MR1 */ | ||
540 | mr1 |= emac_calc_base_mr1(dev, tx_size, rx_size); | ||
541 | out_be32(&p->mr1, mr1); | ||
542 | |||
543 | /* Set individual MAC address */ | ||
544 | out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]); | ||
545 | out_be32(&p->ialr, (ndev->dev_addr[2] << 24) | | ||
546 | (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) | | ||
547 | ndev->dev_addr[5]); | ||
548 | |||
549 | /* VLAN Tag Protocol ID */ | ||
550 | out_be32(&p->vtpid, 0x8100); | ||
551 | |||
552 | /* Receive mode register */ | ||
553 | r = emac_iff2rmr(ndev); | ||
554 | if (r & EMAC_RMR_MAE) | ||
555 | emac_hash_mc(dev); | ||
556 | out_be32(&p->rmr, r); | ||
557 | |||
558 | /* FIFOs thresholds */ | ||
559 | if (emac_has_feature(dev, EMAC_FTR_EMAC4)) | ||
560 | r = EMAC4_TMR1((dev->mal_burst_size / dev->fifo_entry_size) + 1, | ||
561 | tx_size / 2 / dev->fifo_entry_size); | ||
562 | else | ||
563 | r = EMAC_TMR1((dev->mal_burst_size / dev->fifo_entry_size) + 1, | ||
564 | tx_size / 2 / dev->fifo_entry_size); | ||
565 | out_be32(&p->tmr1, r); | ||
566 | out_be32(&p->trtr, emac_calc_trtr(dev, tx_size / 2)); | ||
567 | |||
568 | /* PAUSE frame is sent when RX FIFO reaches its high-water mark, | ||
569 | there should be still enough space in FIFO to allow the our link | ||
570 | partner time to process this frame and also time to send PAUSE | ||
571 | frame itself. | ||
572 | |||
573 | Here is the worst case scenario for the RX FIFO "headroom" | ||
574 | (from "The Switch Book") (100Mbps, without preamble, inter-frame gap): | ||
575 | |||
576 | 1) One maximum-length frame on TX 1522 bytes | ||
577 | 2) One PAUSE frame time 64 bytes | ||
578 | 3) PAUSE frame decode time allowance 64 bytes | ||
579 | 4) One maximum-length frame on RX 1522 bytes | ||
580 | 5) Round-trip propagation delay of the link (100Mb) 15 bytes | ||
581 | ---------- | ||
582 | 3187 bytes | ||
583 | |||
584 | I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes) | ||
585 | low-water mark to RX_FIFO_SIZE / 8 (512 bytes) | ||
586 | */ | ||
587 | r = emac_calc_rwmr(dev, rx_size / 8 / dev->fifo_entry_size, | ||
588 | rx_size / 4 / dev->fifo_entry_size); | ||
589 | out_be32(&p->rwmr, r); | ||
590 | |||
591 | /* Set PAUSE timer to the maximum */ | ||
592 | out_be32(&p->ptr, 0xffff); | ||
593 | |||
594 | /* IRQ sources */ | ||
595 | r = EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE | | ||
596 | EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE | | ||
597 | EMAC_ISR_IRE | EMAC_ISR_TE; | ||
598 | if (emac_has_feature(dev, EMAC_FTR_EMAC4)) | ||
599 | r |= EMAC4_ISR_TXPE | EMAC4_ISR_RXPE /* | EMAC4_ISR_TXUE | | ||
600 | EMAC4_ISR_RXOE | */; | ||
601 | out_be32(&p->iser, r); | ||
602 | |||
603 | /* We need to take GPCS PHY out of isolate mode after EMAC reset */ | ||
604 | if (emac_phy_gpcs(dev->phy.mode)) | ||
605 | emac_mii_reset_phy(&dev->phy); | ||
606 | |||
607 | return 0; | ||
608 | } | ||
609 | |||
610 | static void emac_reinitialize(struct emac_instance *dev) | ||
611 | { | ||
612 | DBG(dev, "reinitialize" NL); | ||
613 | |||
614 | emac_netif_stop(dev); | ||
615 | if (!emac_configure(dev)) { | ||
616 | emac_tx_enable(dev); | ||
617 | emac_rx_enable(dev); | ||
618 | } | ||
619 | emac_netif_start(dev); | ||
620 | } | ||
621 | |||
622 | static void emac_full_tx_reset(struct emac_instance *dev) | ||
623 | { | ||
624 | DBG(dev, "full_tx_reset" NL); | ||
625 | |||
626 | emac_tx_disable(dev); | ||
627 | mal_disable_tx_channel(dev->mal, dev->mal_tx_chan); | ||
628 | emac_clean_tx_ring(dev); | ||
629 | dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0; | ||
630 | |||
631 | emac_configure(dev); | ||
632 | |||
633 | mal_enable_tx_channel(dev->mal, dev->mal_tx_chan); | ||
634 | emac_tx_enable(dev); | ||
635 | emac_rx_enable(dev); | ||
636 | } | ||
637 | |||
638 | static void emac_reset_work(struct work_struct *work) | ||
639 | { | ||
640 | struct emac_instance *dev = container_of(work, struct emac_instance, reset_work); | ||
641 | |||
642 | DBG(dev, "reset_work" NL); | ||
643 | |||
644 | mutex_lock(&dev->link_lock); | ||
645 | emac_netif_stop(dev); | ||
646 | emac_full_tx_reset(dev); | ||
647 | emac_netif_start(dev); | ||
648 | mutex_unlock(&dev->link_lock); | ||
649 | } | ||
650 | |||
651 | static void emac_tx_timeout(struct net_device *ndev) | ||
652 | { | ||
653 | struct emac_instance *dev = netdev_priv(ndev); | ||
654 | |||
655 | DBG(dev, "tx_timeout" NL); | ||
656 | |||
657 | schedule_work(&dev->reset_work); | ||
658 | } | ||
659 | |||
660 | |||
661 | static inline int emac_phy_done(struct emac_instance *dev, u32 stacr) | ||
662 | { | ||
663 | int done = !!(stacr & EMAC_STACR_OC); | ||
664 | |||
665 | if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT)) | ||
666 | done = !done; | ||
667 | |||
668 | return done; | ||
669 | }; | ||
670 | |||
671 | static int __emac_mdio_read(struct emac_instance *dev, u8 id, u8 reg) | ||
672 | { | ||
673 | struct emac_regs __iomem *p = dev->emacp; | ||
674 | u32 r = 0; | ||
675 | int n, err = -ETIMEDOUT; | ||
676 | |||
677 | mutex_lock(&dev->mdio_lock); | ||
678 | |||
679 | DBG2(dev, "mdio_read(%02x,%02x)" NL, id, reg); | ||
680 | |||
681 | /* Enable proper MDIO port */ | ||
682 | if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) | ||
683 | zmii_get_mdio(dev->zmii_dev, dev->zmii_port); | ||
684 | if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) | ||
685 | rgmii_get_mdio(dev->rgmii_dev, dev->rgmii_port); | ||
686 | |||
687 | /* Wait for management interface to become idle */ | ||
688 | n = 10; | ||
689 | while (!emac_phy_done(dev, in_be32(&p->stacr))) { | ||
690 | udelay(1); | ||
691 | if (!--n) { | ||
692 | DBG2(dev, " -> timeout wait idle\n"); | ||
693 | goto bail; | ||
694 | } | ||
695 | } | ||
696 | |||
697 | /* Issue read command */ | ||
698 | if (emac_has_feature(dev, EMAC_FTR_EMAC4)) | ||
699 | r = EMAC4_STACR_BASE(dev->opb_bus_freq); | ||
700 | else | ||
701 | r = EMAC_STACR_BASE(dev->opb_bus_freq); | ||
702 | if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT)) | ||
703 | r |= EMAC_STACR_OC; | ||
704 | if (emac_has_feature(dev, EMAC_FTR_HAS_AXON_STACR)) | ||
705 | r |= EMACX_STACR_STAC_READ; | ||
706 | else | ||
707 | r |= EMAC_STACR_STAC_READ; | ||
708 | r |= (reg & EMAC_STACR_PRA_MASK) | ||
709 | | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT); | ||
710 | out_be32(&p->stacr, r); | ||
711 | |||
712 | /* Wait for read to complete */ | ||
713 | n = 100; | ||
714 | while (!emac_phy_done(dev, (r = in_be32(&p->stacr)))) { | ||
715 | udelay(1); | ||
716 | if (!--n) { | ||
717 | DBG2(dev, " -> timeout wait complete\n"); | ||
718 | goto bail; | ||
719 | } | ||
720 | } | ||
721 | |||
722 | if (unlikely(r & EMAC_STACR_PHYE)) { | ||
723 | DBG(dev, "mdio_read(%02x, %02x) failed" NL, id, reg); | ||
724 | err = -EREMOTEIO; | ||
725 | goto bail; | ||
726 | } | ||
727 | |||
728 | r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK); | ||
729 | |||
730 | DBG2(dev, "mdio_read -> %04x" NL, r); | ||
731 | err = 0; | ||
732 | bail: | ||
733 | if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) | ||
734 | rgmii_put_mdio(dev->rgmii_dev, dev->rgmii_port); | ||
735 | if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) | ||
736 | zmii_put_mdio(dev->zmii_dev, dev->zmii_port); | ||
737 | mutex_unlock(&dev->mdio_lock); | ||
738 | |||
739 | return err == 0 ? r : err; | ||
740 | } | ||
741 | |||
742 | static void __emac_mdio_write(struct emac_instance *dev, u8 id, u8 reg, | ||
743 | u16 val) | ||
744 | { | ||
745 | struct emac_regs __iomem *p = dev->emacp; | ||
746 | u32 r = 0; | ||
747 | int n, err = -ETIMEDOUT; | ||
748 | |||
749 | mutex_lock(&dev->mdio_lock); | ||
750 | |||
751 | DBG2(dev, "mdio_write(%02x,%02x,%04x)" NL, id, reg, val); | ||
752 | |||
753 | /* Enable proper MDIO port */ | ||
754 | if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) | ||
755 | zmii_get_mdio(dev->zmii_dev, dev->zmii_port); | ||
756 | if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) | ||
757 | rgmii_get_mdio(dev->rgmii_dev, dev->rgmii_port); | ||
758 | |||
759 | /* Wait for management interface to be idle */ | ||
760 | n = 10; | ||
761 | while (!emac_phy_done(dev, in_be32(&p->stacr))) { | ||
762 | udelay(1); | ||
763 | if (!--n) { | ||
764 | DBG2(dev, " -> timeout wait idle\n"); | ||
765 | goto bail; | ||
766 | } | ||
767 | } | ||
768 | |||
769 | /* Issue write command */ | ||
770 | if (emac_has_feature(dev, EMAC_FTR_EMAC4)) | ||
771 | r = EMAC4_STACR_BASE(dev->opb_bus_freq); | ||
772 | else | ||
773 | r = EMAC_STACR_BASE(dev->opb_bus_freq); | ||
774 | if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT)) | ||
775 | r |= EMAC_STACR_OC; | ||
776 | if (emac_has_feature(dev, EMAC_FTR_HAS_AXON_STACR)) | ||
777 | r |= EMACX_STACR_STAC_WRITE; | ||
778 | else | ||
779 | r |= EMAC_STACR_STAC_WRITE; | ||
780 | r |= (reg & EMAC_STACR_PRA_MASK) | | ||
781 | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) | | ||
782 | (val << EMAC_STACR_PHYD_SHIFT); | ||
783 | out_be32(&p->stacr, r); | ||
784 | |||
785 | /* Wait for write to complete */ | ||
786 | n = 100; | ||
787 | while (!emac_phy_done(dev, in_be32(&p->stacr))) { | ||
788 | udelay(1); | ||
789 | if (!--n) { | ||
790 | DBG2(dev, " -> timeout wait complete\n"); | ||
791 | goto bail; | ||
792 | } | ||
793 | } | ||
794 | err = 0; | ||
795 | bail: | ||
796 | if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) | ||
797 | rgmii_put_mdio(dev->rgmii_dev, dev->rgmii_port); | ||
798 | if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) | ||
799 | zmii_put_mdio(dev->zmii_dev, dev->zmii_port); | ||
800 | mutex_unlock(&dev->mdio_lock); | ||
801 | } | ||
802 | |||
803 | static int emac_mdio_read(struct net_device *ndev, int id, int reg) | ||
804 | { | ||
805 | struct emac_instance *dev = netdev_priv(ndev); | ||
806 | int res; | ||
807 | |||
808 | res = __emac_mdio_read(dev->mdio_instance ? dev->mdio_instance : dev, | ||
809 | (u8) id, (u8) reg); | ||
810 | return res; | ||
811 | } | ||
812 | |||
813 | static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val) | ||
814 | { | ||
815 | struct emac_instance *dev = netdev_priv(ndev); | ||
816 | |||
817 | __emac_mdio_write(dev->mdio_instance ? dev->mdio_instance : dev, | ||
818 | (u8) id, (u8) reg, (u16) val); | ||
819 | } | ||
820 | |||
821 | /* Tx lock BH */ | ||
822 | static void __emac_set_multicast_list(struct emac_instance *dev) | ||
823 | { | ||
824 | struct emac_regs __iomem *p = dev->emacp; | ||
825 | u32 rmr = emac_iff2rmr(dev->ndev); | ||
826 | |||
827 | DBG(dev, "__multicast %08x" NL, rmr); | ||
828 | |||
829 | /* I decided to relax register access rules here to avoid | ||
830 | * full EMAC reset. | ||
831 | * | ||
832 | * There is a real problem with EMAC4 core if we use MWSW_001 bit | ||
833 | * in MR1 register and do a full EMAC reset. | ||
834 | * One TX BD status update is delayed and, after EMAC reset, it | ||
835 | * never happens, resulting in TX hung (it'll be recovered by TX | ||
836 | * timeout handler eventually, but this is just gross). | ||
837 | * So we either have to do full TX reset or try to cheat here :) | ||
838 | * | ||
839 | * The only required change is to RX mode register, so I *think* all | ||
840 | * we need is just to stop RX channel. This seems to work on all | ||
841 | * tested SoCs. --ebs | ||
842 | * | ||
843 | * If we need the full reset, we might just trigger the workqueue | ||
844 | * and do it async... a bit nasty but should work --BenH | ||
845 | */ | ||
846 | dev->mcast_pending = 0; | ||
847 | emac_rx_disable(dev); | ||
848 | if (rmr & EMAC_RMR_MAE) | ||
849 | emac_hash_mc(dev); | ||
850 | out_be32(&p->rmr, rmr); | ||
851 | emac_rx_enable(dev); | ||
852 | } | ||
853 | |||
854 | /* Tx lock BH */ | ||
855 | static void emac_set_multicast_list(struct net_device *ndev) | ||
856 | { | ||
857 | struct emac_instance *dev = netdev_priv(ndev); | ||
858 | |||
859 | DBG(dev, "multicast" NL); | ||
860 | |||
861 | BUG_ON(!netif_running(dev->ndev)); | ||
862 | |||
863 | if (dev->no_mcast) { | ||
864 | dev->mcast_pending = 1; | ||
865 | return; | ||
866 | } | ||
867 | __emac_set_multicast_list(dev); | ||
868 | } | ||
869 | |||
870 | static int emac_resize_rx_ring(struct emac_instance *dev, int new_mtu) | ||
871 | { | ||
872 | int rx_sync_size = emac_rx_sync_size(new_mtu); | ||
873 | int rx_skb_size = emac_rx_skb_size(new_mtu); | ||
874 | int i, ret = 0; | ||
875 | |||
876 | mutex_lock(&dev->link_lock); | ||
877 | emac_netif_stop(dev); | ||
878 | emac_rx_disable(dev); | ||
879 | mal_disable_rx_channel(dev->mal, dev->mal_rx_chan); | ||
880 | |||
881 | if (dev->rx_sg_skb) { | ||
882 | ++dev->estats.rx_dropped_resize; | ||
883 | dev_kfree_skb(dev->rx_sg_skb); | ||
884 | dev->rx_sg_skb = NULL; | ||
885 | } | ||
886 | |||
887 | /* Make a first pass over RX ring and mark BDs ready, dropping | ||
888 | * non-processed packets on the way. We need this as a separate pass | ||
889 | * to simplify error recovery in the case of allocation failure later. | ||
890 | */ | ||
891 | for (i = 0; i < NUM_RX_BUFF; ++i) { | ||
892 | if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST) | ||
893 | ++dev->estats.rx_dropped_resize; | ||
894 | |||
895 | dev->rx_desc[i].data_len = 0; | ||
896 | dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | | ||
897 | (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); | ||
898 | } | ||
899 | |||
900 | /* Reallocate RX ring only if bigger skb buffers are required */ | ||
901 | if (rx_skb_size <= dev->rx_skb_size) | ||
902 | goto skip; | ||
903 | |||
904 | /* Second pass, allocate new skbs */ | ||
905 | for (i = 0; i < NUM_RX_BUFF; ++i) { | ||
906 | struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC); | ||
907 | if (!skb) { | ||
908 | ret = -ENOMEM; | ||
909 | goto oom; | ||
910 | } | ||
911 | |||
912 | BUG_ON(!dev->rx_skb[i]); | ||
913 | dev_kfree_skb(dev->rx_skb[i]); | ||
914 | |||
915 | skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); | ||
916 | dev->rx_desc[i].data_ptr = | ||
917 | dma_map_single(&dev->ofdev->dev, skb->data - 2, rx_sync_size, | ||
918 | DMA_FROM_DEVICE) + 2; | ||
919 | dev->rx_skb[i] = skb; | ||
920 | } | ||
921 | skip: | ||
922 | /* Check if we need to change "Jumbo" bit in MR1 */ | ||
923 | if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) { | ||
924 | /* This is to prevent starting RX channel in emac_rx_enable() */ | ||
925 | set_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags); | ||
926 | |||
927 | dev->ndev->mtu = new_mtu; | ||
928 | emac_full_tx_reset(dev); | ||
929 | } | ||
930 | |||
931 | mal_set_rcbs(dev->mal, dev->mal_rx_chan, emac_rx_size(new_mtu)); | ||
932 | oom: | ||
933 | /* Restart RX */ | ||
934 | clear_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags); | ||
935 | dev->rx_slot = 0; | ||
936 | mal_enable_rx_channel(dev->mal, dev->mal_rx_chan); | ||
937 | emac_rx_enable(dev); | ||
938 | emac_netif_start(dev); | ||
939 | mutex_unlock(&dev->link_lock); | ||
940 | |||
941 | return ret; | ||
942 | } | ||
943 | |||
944 | /* Process ctx, rtnl_lock semaphore */ | ||
945 | static int emac_change_mtu(struct net_device *ndev, int new_mtu) | ||
946 | { | ||
947 | struct emac_instance *dev = netdev_priv(ndev); | ||
948 | int ret = 0; | ||
949 | |||
950 | if (new_mtu < EMAC_MIN_MTU || new_mtu > dev->max_mtu) | ||
951 | return -EINVAL; | ||
952 | |||
953 | DBG(dev, "change_mtu(%d)" NL, new_mtu); | ||
954 | |||
955 | if (netif_running(ndev)) { | ||
956 | /* Check if we really need to reinitalize RX ring */ | ||
957 | if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu)) | ||
958 | ret = emac_resize_rx_ring(dev, new_mtu); | ||
959 | } | ||
960 | |||
961 | if (!ret) { | ||
962 | ndev->mtu = new_mtu; | ||
963 | dev->rx_skb_size = emac_rx_skb_size(new_mtu); | ||
964 | dev->rx_sync_size = emac_rx_sync_size(new_mtu); | ||
965 | } | ||
966 | |||
967 | return ret; | ||
968 | } | ||
969 | |||
970 | static void emac_clean_tx_ring(struct emac_instance *dev) | ||
971 | { | ||
972 | int i; | ||
973 | |||
974 | for (i = 0; i < NUM_TX_BUFF; ++i) { | ||
975 | if (dev->tx_skb[i]) { | ||
976 | dev_kfree_skb(dev->tx_skb[i]); | ||
977 | dev->tx_skb[i] = NULL; | ||
978 | if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY) | ||
979 | ++dev->estats.tx_dropped; | ||
980 | } | ||
981 | dev->tx_desc[i].ctrl = 0; | ||
982 | dev->tx_desc[i].data_ptr = 0; | ||
983 | } | ||
984 | } | ||
985 | |||
986 | static void emac_clean_rx_ring(struct emac_instance *dev) | ||
987 | { | ||
988 | int i; | ||
989 | |||
990 | for (i = 0; i < NUM_RX_BUFF; ++i) | ||
991 | if (dev->rx_skb[i]) { | ||
992 | dev->rx_desc[i].ctrl = 0; | ||
993 | dev_kfree_skb(dev->rx_skb[i]); | ||
994 | dev->rx_skb[i] = NULL; | ||
995 | dev->rx_desc[i].data_ptr = 0; | ||
996 | } | ||
997 | |||
998 | if (dev->rx_sg_skb) { | ||
999 | dev_kfree_skb(dev->rx_sg_skb); | ||
1000 | dev->rx_sg_skb = NULL; | ||
1001 | } | ||
1002 | } | ||
1003 | |||
1004 | static inline int emac_alloc_rx_skb(struct emac_instance *dev, int slot, | ||
1005 | gfp_t flags) | ||
1006 | { | ||
1007 | struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags); | ||
1008 | if (unlikely(!skb)) | ||
1009 | return -ENOMEM; | ||
1010 | |||
1011 | dev->rx_skb[slot] = skb; | ||
1012 | dev->rx_desc[slot].data_len = 0; | ||
1013 | |||
1014 | skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); | ||
1015 | dev->rx_desc[slot].data_ptr = | ||
1016 | dma_map_single(&dev->ofdev->dev, skb->data - 2, dev->rx_sync_size, | ||
1017 | DMA_FROM_DEVICE) + 2; | ||
1018 | wmb(); | ||
1019 | dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | | ||
1020 | (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); | ||
1021 | |||
1022 | return 0; | ||
1023 | } | ||
1024 | |||
1025 | static void emac_print_link_status(struct emac_instance *dev) | ||
1026 | { | ||
1027 | if (netif_carrier_ok(dev->ndev)) | ||
1028 | printk(KERN_INFO "%s: link is up, %d %s%s\n", | ||
1029 | dev->ndev->name, dev->phy.speed, | ||
1030 | dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX", | ||
1031 | dev->phy.pause ? ", pause enabled" : | ||
1032 | dev->phy.asym_pause ? ", asymmetric pause enabled" : ""); | ||
1033 | else | ||
1034 | printk(KERN_INFO "%s: link is down\n", dev->ndev->name); | ||
1035 | } | ||
1036 | |||
1037 | /* Process ctx, rtnl_lock semaphore */ | ||
1038 | static int emac_open(struct net_device *ndev) | ||
1039 | { | ||
1040 | struct emac_instance *dev = netdev_priv(ndev); | ||
1041 | int err, i; | ||
1042 | |||
1043 | DBG(dev, "open" NL); | ||
1044 | |||
1045 | /* Setup error IRQ handler */ | ||
1046 | err = request_irq(dev->emac_irq, emac_irq, 0, "EMAC", dev); | ||
1047 | if (err) { | ||
1048 | printk(KERN_ERR "%s: failed to request IRQ %d\n", | ||
1049 | ndev->name, dev->emac_irq); | ||
1050 | return err; | ||
1051 | } | ||
1052 | |||
1053 | /* Allocate RX ring */ | ||
1054 | for (i = 0; i < NUM_RX_BUFF; ++i) | ||
1055 | if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) { | ||
1056 | printk(KERN_ERR "%s: failed to allocate RX ring\n", | ||
1057 | ndev->name); | ||
1058 | goto oom; | ||
1059 | } | ||
1060 | |||
1061 | dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot = 0; | ||
1062 | clear_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags); | ||
1063 | dev->rx_sg_skb = NULL; | ||
1064 | |||
1065 | mutex_lock(&dev->link_lock); | ||
1066 | |||
1067 | /* XXX Start PHY polling now. Shouldn't wr do like sungem instead and | ||
1068 | * always poll the PHY even when the iface is down ? That would allow | ||
1069 | * things like laptop-net to work. --BenH | ||
1070 | */ | ||
1071 | if (dev->phy.address >= 0) { | ||
1072 | int link_poll_interval; | ||
1073 | if (dev->phy.def->ops->poll_link(&dev->phy)) { | ||
1074 | dev->phy.def->ops->read_link(&dev->phy); | ||
1075 | netif_carrier_on(dev->ndev); | ||
1076 | link_poll_interval = PHY_POLL_LINK_ON; | ||
1077 | } else { | ||
1078 | netif_carrier_off(dev->ndev); | ||
1079 | link_poll_interval = PHY_POLL_LINK_OFF; | ||
1080 | } | ||
1081 | dev->link_polling = 1; | ||
1082 | wmb(); | ||
1083 | schedule_delayed_work(&dev->link_work, link_poll_interval); | ||
1084 | emac_print_link_status(dev); | ||
1085 | } else | ||
1086 | netif_carrier_on(dev->ndev); | ||
1087 | |||
1088 | emac_configure(dev); | ||
1089 | mal_poll_add(dev->mal, &dev->commac); | ||
1090 | mal_enable_tx_channel(dev->mal, dev->mal_tx_chan); | ||
1091 | mal_set_rcbs(dev->mal, dev->mal_rx_chan, emac_rx_size(ndev->mtu)); | ||
1092 | mal_enable_rx_channel(dev->mal, dev->mal_rx_chan); | ||
1093 | emac_tx_enable(dev); | ||
1094 | emac_rx_enable(dev); | ||
1095 | emac_netif_start(dev); | ||
1096 | |||
1097 | mutex_unlock(&dev->link_lock); | ||
1098 | |||
1099 | return 0; | ||
1100 | oom: | ||
1101 | emac_clean_rx_ring(dev); | ||
1102 | free_irq(dev->emac_irq, dev); | ||
1103 | |||
1104 | return -ENOMEM; | ||
1105 | } | ||
1106 | |||
1107 | /* BHs disabled */ | ||
1108 | #if 0 | ||
1109 | static int emac_link_differs(struct emac_instance *dev) | ||
1110 | { | ||
1111 | u32 r = in_be32(&dev->emacp->mr1); | ||
1112 | |||
1113 | int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF; | ||
1114 | int speed, pause, asym_pause; | ||
1115 | |||
1116 | if (r & EMAC_MR1_MF_1000) | ||
1117 | speed = SPEED_1000; | ||
1118 | else if (r & EMAC_MR1_MF_100) | ||
1119 | speed = SPEED_100; | ||
1120 | else | ||
1121 | speed = SPEED_10; | ||
1122 | |||
1123 | switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) { | ||
1124 | case (EMAC_MR1_EIFC | EMAC_MR1_APP): | ||
1125 | pause = 1; | ||
1126 | asym_pause = 0; | ||
1127 | break; | ||
1128 | case EMAC_MR1_APP: | ||
1129 | pause = 0; | ||
1130 | asym_pause = 1; | ||
1131 | break; | ||
1132 | default: | ||
1133 | pause = asym_pause = 0; | ||
1134 | } | ||
1135 | return speed != dev->phy.speed || duplex != dev->phy.duplex || | ||
1136 | pause != dev->phy.pause || asym_pause != dev->phy.asym_pause; | ||
1137 | } | ||
1138 | #endif | ||
1139 | |||
1140 | static void emac_link_timer(struct work_struct *work) | ||
1141 | { | ||
1142 | struct emac_instance *dev = | ||
1143 | container_of((struct delayed_work *)work, | ||
1144 | struct emac_instance, link_work); | ||
1145 | int link_poll_interval; | ||
1146 | |||
1147 | mutex_lock(&dev->link_lock); | ||
1148 | |||
1149 | DBG2(dev, "link timer" NL); | ||
1150 | |||
1151 | if (dev->phy.def->ops->poll_link(&dev->phy)) { | ||
1152 | if (!netif_carrier_ok(dev->ndev)) { | ||
1153 | /* Get new link parameters */ | ||
1154 | dev->phy.def->ops->read_link(&dev->phy); | ||
1155 | |||
1156 | netif_carrier_on(dev->ndev); | ||
1157 | emac_netif_stop(dev); | ||
1158 | emac_full_tx_reset(dev); | ||
1159 | emac_netif_start(dev); | ||
1160 | emac_print_link_status(dev); | ||
1161 | } | ||
1162 | link_poll_interval = PHY_POLL_LINK_ON; | ||
1163 | } else { | ||
1164 | if (netif_carrier_ok(dev->ndev)) { | ||
1165 | emac_reinitialize(dev); | ||
1166 | netif_carrier_off(dev->ndev); | ||
1167 | netif_tx_disable(dev->ndev); | ||
1168 | emac_print_link_status(dev); | ||
1169 | } | ||
1170 | link_poll_interval = PHY_POLL_LINK_OFF; | ||
1171 | } | ||
1172 | schedule_delayed_work(&dev->link_work, link_poll_interval); | ||
1173 | |||
1174 | mutex_unlock(&dev->link_lock); | ||
1175 | } | ||
1176 | |||
1177 | static void emac_force_link_update(struct emac_instance *dev) | ||
1178 | { | ||
1179 | netif_carrier_off(dev->ndev); | ||
1180 | if (dev->link_polling) { | ||
1181 | cancel_rearming_delayed_work(&dev->link_work); | ||
1182 | if (dev->link_polling) | ||
1183 | schedule_delayed_work(&dev->link_work, PHY_POLL_LINK_OFF); | ||
1184 | } | ||
1185 | } | ||
1186 | |||
1187 | /* Process ctx, rtnl_lock semaphore */ | ||
1188 | static int emac_close(struct net_device *ndev) | ||
1189 | { | ||
1190 | struct emac_instance *dev = netdev_priv(ndev); | ||
1191 | |||
1192 | DBG(dev, "close" NL); | ||
1193 | |||
1194 | if (dev->phy.address >= 0) | ||
1195 | cancel_rearming_delayed_work(&dev->link_work); | ||
1196 | |||
1197 | emac_netif_stop(dev); | ||
1198 | flush_scheduled_work(); | ||
1199 | |||
1200 | emac_rx_disable(dev); | ||
1201 | emac_tx_disable(dev); | ||
1202 | mal_disable_rx_channel(dev->mal, dev->mal_rx_chan); | ||
1203 | mal_disable_tx_channel(dev->mal, dev->mal_tx_chan); | ||
1204 | mal_poll_del(dev->mal, &dev->commac); | ||
1205 | |||
1206 | emac_clean_tx_ring(dev); | ||
1207 | emac_clean_rx_ring(dev); | ||
1208 | |||
1209 | free_irq(dev->emac_irq, dev); | ||
1210 | |||
1211 | return 0; | ||
1212 | } | ||
1213 | |||
1214 | static inline u16 emac_tx_csum(struct emac_instance *dev, | ||
1215 | struct sk_buff *skb) | ||
1216 | { | ||
1217 | if (emac_has_feature(dev, EMAC_FTR_HAS_TAH && | ||
1218 | skb->ip_summed == CHECKSUM_PARTIAL)) { | ||
1219 | ++dev->stats.tx_packets_csum; | ||
1220 | return EMAC_TX_CTRL_TAH_CSUM; | ||
1221 | } | ||
1222 | return 0; | ||
1223 | } | ||
1224 | |||
1225 | static inline int emac_xmit_finish(struct emac_instance *dev, int len) | ||
1226 | { | ||
1227 | struct emac_regs __iomem *p = dev->emacp; | ||
1228 | struct net_device *ndev = dev->ndev; | ||
1229 | |||
1230 | /* Send the packet out. If the if makes a significant perf | ||
1231 | * difference, then we can store the TMR0 value in "dev" | ||
1232 | * instead | ||
1233 | */ | ||
1234 | if (emac_has_feature(dev, EMAC_FTR_EMAC4)) | ||
1235 | out_be32(&p->tmr0, EMAC_TMR0_XMIT); | ||
1236 | else | ||
1237 | out_be32(&p->tmr0, EMAC4_TMR0_XMIT); | ||
1238 | |||
1239 | if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) { | ||
1240 | netif_stop_queue(ndev); | ||
1241 | DBG2(dev, "stopped TX queue" NL); | ||
1242 | } | ||
1243 | |||
1244 | ndev->trans_start = jiffies; | ||
1245 | ++dev->stats.tx_packets; | ||
1246 | dev->stats.tx_bytes += len; | ||
1247 | |||
1248 | return 0; | ||
1249 | } | ||
1250 | |||
1251 | /* Tx lock BH */ | ||
1252 | static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev) | ||
1253 | { | ||
1254 | struct emac_instance *dev = netdev_priv(ndev); | ||
1255 | unsigned int len = skb->len; | ||
1256 | int slot; | ||
1257 | |||
1258 | u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | | ||
1259 | MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb); | ||
1260 | |||
1261 | slot = dev->tx_slot++; | ||
1262 | if (dev->tx_slot == NUM_TX_BUFF) { | ||
1263 | dev->tx_slot = 0; | ||
1264 | ctrl |= MAL_TX_CTRL_WRAP; | ||
1265 | } | ||
1266 | |||
1267 | DBG2(dev, "xmit(%u) %d" NL, len, slot); | ||
1268 | |||
1269 | dev->tx_skb[slot] = skb; | ||
1270 | dev->tx_desc[slot].data_ptr = dma_map_single(&dev->ofdev->dev, | ||
1271 | skb->data, len, | ||
1272 | DMA_TO_DEVICE); | ||
1273 | dev->tx_desc[slot].data_len = (u16) len; | ||
1274 | wmb(); | ||
1275 | dev->tx_desc[slot].ctrl = ctrl; | ||
1276 | |||
1277 | return emac_xmit_finish(dev, len); | ||
1278 | } | ||
1279 | |||
1280 | #ifdef CONFIG_IBM_NEW_EMAC_TAH | ||
1281 | static inline int emac_xmit_split(struct emac_instance *dev, int slot, | ||
1282 | u32 pd, int len, int last, u16 base_ctrl) | ||
1283 | { | ||
1284 | while (1) { | ||
1285 | u16 ctrl = base_ctrl; | ||
1286 | int chunk = min(len, MAL_MAX_TX_SIZE); | ||
1287 | len -= chunk; | ||
1288 | |||
1289 | slot = (slot + 1) % NUM_TX_BUFF; | ||
1290 | |||
1291 | if (last && !len) | ||
1292 | ctrl |= MAL_TX_CTRL_LAST; | ||
1293 | if (slot == NUM_TX_BUFF - 1) | ||
1294 | ctrl |= MAL_TX_CTRL_WRAP; | ||
1295 | |||
1296 | dev->tx_skb[slot] = NULL; | ||
1297 | dev->tx_desc[slot].data_ptr = pd; | ||
1298 | dev->tx_desc[slot].data_len = (u16) chunk; | ||
1299 | dev->tx_desc[slot].ctrl = ctrl; | ||
1300 | ++dev->tx_cnt; | ||
1301 | |||
1302 | if (!len) | ||
1303 | break; | ||
1304 | |||
1305 | pd += chunk; | ||
1306 | } | ||
1307 | return slot; | ||
1308 | } | ||
1309 | |||
1310 | /* Tx lock BH disabled (SG version for TAH equipped EMACs) */ | ||
1311 | static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev) | ||
1312 | { | ||
1313 | struct emac_instance *dev = netdev_priv(ndev); | ||
1314 | int nr_frags = skb_shinfo(skb)->nr_frags; | ||
1315 | int len = skb->len, chunk; | ||
1316 | int slot, i; | ||
1317 | u16 ctrl; | ||
1318 | u32 pd; | ||
1319 | |||
1320 | /* This is common "fast" path */ | ||
1321 | if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE)) | ||
1322 | return emac_start_xmit(skb, ndev); | ||
1323 | |||
1324 | len -= skb->data_len; | ||
1325 | |||
1326 | /* Note, this is only an *estimation*, we can still run out of empty | ||
1327 | * slots because of the additional fragmentation into | ||
1328 | * MAL_MAX_TX_SIZE-sized chunks | ||
1329 | */ | ||
1330 | if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF)) | ||
1331 | goto stop_queue; | ||
1332 | |||
1333 | ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | | ||
1334 | emac_tx_csum(dev, skb); | ||
1335 | slot = dev->tx_slot; | ||
1336 | |||
1337 | /* skb data */ | ||
1338 | dev->tx_skb[slot] = NULL; | ||
1339 | chunk = min(len, MAL_MAX_TX_SIZE); | ||
1340 | dev->tx_desc[slot].data_ptr = pd = | ||
1341 | dma_map_single(&dev->ofdev->dev, skb->data, len, DMA_TO_DEVICE); | ||
1342 | dev->tx_desc[slot].data_len = (u16) chunk; | ||
1343 | len -= chunk; | ||
1344 | if (unlikely(len)) | ||
1345 | slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags, | ||
1346 | ctrl); | ||
1347 | /* skb fragments */ | ||
1348 | for (i = 0; i < nr_frags; ++i) { | ||
1349 | struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; | ||
1350 | len = frag->size; | ||
1351 | |||
1352 | if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF)) | ||
1353 | goto undo_frame; | ||
1354 | |||
1355 | pd = dma_map_page(&dev->ofdev->dev, frag->page, frag->page_offset, len, | ||
1356 | DMA_TO_DEVICE); | ||
1357 | |||
1358 | slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1, | ||
1359 | ctrl); | ||
1360 | } | ||
1361 | |||
1362 | DBG2(dev, "xmit_sg(%u) %d - %d" NL, skb->len, dev->tx_slot, slot); | ||
1363 | |||
1364 | /* Attach skb to the last slot so we don't release it too early */ | ||
1365 | dev->tx_skb[slot] = skb; | ||
1366 | |||
1367 | /* Send the packet out */ | ||
1368 | if (dev->tx_slot == NUM_TX_BUFF - 1) | ||
1369 | ctrl |= MAL_TX_CTRL_WRAP; | ||
1370 | wmb(); | ||
1371 | dev->tx_desc[dev->tx_slot].ctrl = ctrl; | ||
1372 | dev->tx_slot = (slot + 1) % NUM_TX_BUFF; | ||
1373 | |||
1374 | return emac_xmit_finish(dev, skb->len); | ||
1375 | |||
1376 | undo_frame: | ||
1377 | /* Well, too bad. Our previous estimation was overly optimistic. | ||
1378 | * Undo everything. | ||
1379 | */ | ||
1380 | while (slot != dev->tx_slot) { | ||
1381 | dev->tx_desc[slot].ctrl = 0; | ||
1382 | --dev->tx_cnt; | ||
1383 | if (--slot < 0) | ||
1384 | slot = NUM_TX_BUFF - 1; | ||
1385 | } | ||
1386 | ++dev->estats.tx_undo; | ||
1387 | |||
1388 | stop_queue: | ||
1389 | netif_stop_queue(ndev); | ||
1390 | DBG2(dev, "stopped TX queue" NL); | ||
1391 | return 1; | ||
1392 | } | ||
1393 | #else | ||
1394 | # define emac_start_xmit_sg emac_start_xmit | ||
1395 | #endif /* !defined(CONFIG_IBM_NEW_EMAC_TAH) */ | ||
1396 | |||
1397 | /* Tx lock BHs */ | ||
1398 | static void emac_parse_tx_error(struct emac_instance *dev, u16 ctrl) | ||
1399 | { | ||
1400 | struct emac_error_stats *st = &dev->estats; | ||
1401 | |||
1402 | DBG(dev, "BD TX error %04x" NL, ctrl); | ||
1403 | |||
1404 | ++st->tx_bd_errors; | ||
1405 | if (ctrl & EMAC_TX_ST_BFCS) | ||
1406 | ++st->tx_bd_bad_fcs; | ||
1407 | if (ctrl & EMAC_TX_ST_LCS) | ||
1408 | ++st->tx_bd_carrier_loss; | ||
1409 | if (ctrl & EMAC_TX_ST_ED) | ||
1410 | ++st->tx_bd_excessive_deferral; | ||
1411 | if (ctrl & EMAC_TX_ST_EC) | ||
1412 | ++st->tx_bd_excessive_collisions; | ||
1413 | if (ctrl & EMAC_TX_ST_LC) | ||
1414 | ++st->tx_bd_late_collision; | ||
1415 | if (ctrl & EMAC_TX_ST_MC) | ||
1416 | ++st->tx_bd_multple_collisions; | ||
1417 | if (ctrl & EMAC_TX_ST_SC) | ||
1418 | ++st->tx_bd_single_collision; | ||
1419 | if (ctrl & EMAC_TX_ST_UR) | ||
1420 | ++st->tx_bd_underrun; | ||
1421 | if (ctrl & EMAC_TX_ST_SQE) | ||
1422 | ++st->tx_bd_sqe; | ||
1423 | } | ||
1424 | |||
1425 | static void emac_poll_tx(void *param) | ||
1426 | { | ||
1427 | struct emac_instance *dev = param; | ||
1428 | u32 bad_mask; | ||
1429 | |||
1430 | DBG2(dev, "poll_tx, %d %d" NL, dev->tx_cnt, dev->ack_slot); | ||
1431 | |||
1432 | if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) | ||
1433 | bad_mask = EMAC_IS_BAD_TX_TAH; | ||
1434 | else | ||
1435 | bad_mask = EMAC_IS_BAD_TX; | ||
1436 | |||
1437 | netif_tx_lock_bh(dev->ndev); | ||
1438 | if (dev->tx_cnt) { | ||
1439 | u16 ctrl; | ||
1440 | int slot = dev->ack_slot, n = 0; | ||
1441 | again: | ||
1442 | ctrl = dev->tx_desc[slot].ctrl; | ||
1443 | if (!(ctrl & MAL_TX_CTRL_READY)) { | ||
1444 | struct sk_buff *skb = dev->tx_skb[slot]; | ||
1445 | ++n; | ||
1446 | |||
1447 | if (skb) { | ||
1448 | dev_kfree_skb(skb); | ||
1449 | dev->tx_skb[slot] = NULL; | ||
1450 | } | ||
1451 | slot = (slot + 1) % NUM_TX_BUFF; | ||
1452 | |||
1453 | if (unlikely(ctrl & bad_mask)) | ||
1454 | emac_parse_tx_error(dev, ctrl); | ||
1455 | |||
1456 | if (--dev->tx_cnt) | ||
1457 | goto again; | ||
1458 | } | ||
1459 | if (n) { | ||
1460 | dev->ack_slot = slot; | ||
1461 | if (netif_queue_stopped(dev->ndev) && | ||
1462 | dev->tx_cnt < EMAC_TX_WAKEUP_THRESH) | ||
1463 | netif_wake_queue(dev->ndev); | ||
1464 | |||
1465 | DBG2(dev, "tx %d pkts" NL, n); | ||
1466 | } | ||
1467 | } | ||
1468 | netif_tx_unlock_bh(dev->ndev); | ||
1469 | } | ||
1470 | |||
1471 | static inline void emac_recycle_rx_skb(struct emac_instance *dev, int slot, | ||
1472 | int len) | ||
1473 | { | ||
1474 | struct sk_buff *skb = dev->rx_skb[slot]; | ||
1475 | |||
1476 | DBG2(dev, "recycle %d %d" NL, slot, len); | ||
1477 | |||
1478 | if (len) | ||
1479 | dma_map_single(&dev->ofdev->dev, skb->data - 2, | ||
1480 | EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE); | ||
1481 | |||
1482 | dev->rx_desc[slot].data_len = 0; | ||
1483 | wmb(); | ||
1484 | dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | | ||
1485 | (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); | ||
1486 | } | ||
1487 | |||
1488 | static void emac_parse_rx_error(struct emac_instance *dev, u16 ctrl) | ||
1489 | { | ||
1490 | struct emac_error_stats *st = &dev->estats; | ||
1491 | |||
1492 | DBG(dev, "BD RX error %04x" NL, ctrl); | ||
1493 | |||
1494 | ++st->rx_bd_errors; | ||
1495 | if (ctrl & EMAC_RX_ST_OE) | ||
1496 | ++st->rx_bd_overrun; | ||
1497 | if (ctrl & EMAC_RX_ST_BP) | ||
1498 | ++st->rx_bd_bad_packet; | ||
1499 | if (ctrl & EMAC_RX_ST_RP) | ||
1500 | ++st->rx_bd_runt_packet; | ||
1501 | if (ctrl & EMAC_RX_ST_SE) | ||
1502 | ++st->rx_bd_short_event; | ||
1503 | if (ctrl & EMAC_RX_ST_AE) | ||
1504 | ++st->rx_bd_alignment_error; | ||
1505 | if (ctrl & EMAC_RX_ST_BFCS) | ||
1506 | ++st->rx_bd_bad_fcs; | ||
1507 | if (ctrl & EMAC_RX_ST_PTL) | ||
1508 | ++st->rx_bd_packet_too_long; | ||
1509 | if (ctrl & EMAC_RX_ST_ORE) | ||
1510 | ++st->rx_bd_out_of_range; | ||
1511 | if (ctrl & EMAC_RX_ST_IRE) | ||
1512 | ++st->rx_bd_in_range; | ||
1513 | } | ||
1514 | |||
1515 | static inline void emac_rx_csum(struct emac_instance *dev, | ||
1516 | struct sk_buff *skb, u16 ctrl) | ||
1517 | { | ||
1518 | #ifdef CONFIG_IBM_NEW_EMAC_TAH | ||
1519 | if (!ctrl && dev->tah_dev) { | ||
1520 | skb->ip_summed = CHECKSUM_UNNECESSARY; | ||
1521 | ++dev->stats.rx_packets_csum; | ||
1522 | } | ||
1523 | #endif | ||
1524 | } | ||
1525 | |||
1526 | static inline int emac_rx_sg_append(struct emac_instance *dev, int slot) | ||
1527 | { | ||
1528 | if (likely(dev->rx_sg_skb != NULL)) { | ||
1529 | int len = dev->rx_desc[slot].data_len; | ||
1530 | int tot_len = dev->rx_sg_skb->len + len; | ||
1531 | |||
1532 | if (unlikely(tot_len + 2 > dev->rx_skb_size)) { | ||
1533 | ++dev->estats.rx_dropped_mtu; | ||
1534 | dev_kfree_skb(dev->rx_sg_skb); | ||
1535 | dev->rx_sg_skb = NULL; | ||
1536 | } else { | ||
1537 | cacheable_memcpy(dev->rx_sg_skb->tail, | ||
1538 | dev->rx_skb[slot]->data, len); | ||
1539 | skb_put(dev->rx_sg_skb, len); | ||
1540 | emac_recycle_rx_skb(dev, slot, len); | ||
1541 | return 0; | ||
1542 | } | ||
1543 | } | ||
1544 | emac_recycle_rx_skb(dev, slot, 0); | ||
1545 | return -1; | ||
1546 | } | ||
1547 | |||
1548 | /* NAPI poll context */ | ||
1549 | static int emac_poll_rx(void *param, int budget) | ||
1550 | { | ||
1551 | struct emac_instance *dev = param; | ||
1552 | int slot = dev->rx_slot, received = 0; | ||
1553 | |||
1554 | DBG2(dev, "poll_rx(%d)" NL, budget); | ||
1555 | |||
1556 | again: | ||
1557 | while (budget > 0) { | ||
1558 | int len; | ||
1559 | struct sk_buff *skb; | ||
1560 | u16 ctrl = dev->rx_desc[slot].ctrl; | ||
1561 | |||
1562 | if (ctrl & MAL_RX_CTRL_EMPTY) | ||
1563 | break; | ||
1564 | |||
1565 | skb = dev->rx_skb[slot]; | ||
1566 | mb(); | ||
1567 | len = dev->rx_desc[slot].data_len; | ||
1568 | |||
1569 | if (unlikely(!MAL_IS_SINGLE_RX(ctrl))) | ||
1570 | goto sg; | ||
1571 | |||
1572 | ctrl &= EMAC_BAD_RX_MASK; | ||
1573 | if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { | ||
1574 | emac_parse_rx_error(dev, ctrl); | ||
1575 | ++dev->estats.rx_dropped_error; | ||
1576 | emac_recycle_rx_skb(dev, slot, 0); | ||
1577 | len = 0; | ||
1578 | goto next; | ||
1579 | } | ||
1580 | |||
1581 | if (len && len < EMAC_RX_COPY_THRESH) { | ||
1582 | struct sk_buff *copy_skb = | ||
1583 | alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC); | ||
1584 | if (unlikely(!copy_skb)) | ||
1585 | goto oom; | ||
1586 | |||
1587 | skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2); | ||
1588 | cacheable_memcpy(copy_skb->data - 2, skb->data - 2, | ||
1589 | len + 2); | ||
1590 | emac_recycle_rx_skb(dev, slot, len); | ||
1591 | skb = copy_skb; | ||
1592 | } else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) | ||
1593 | goto oom; | ||
1594 | |||
1595 | skb_put(skb, len); | ||
1596 | push_packet: | ||
1597 | skb->dev = dev->ndev; | ||
1598 | skb->protocol = eth_type_trans(skb, dev->ndev); | ||
1599 | emac_rx_csum(dev, skb, ctrl); | ||
1600 | |||
1601 | if (unlikely(netif_receive_skb(skb) == NET_RX_DROP)) | ||
1602 | ++dev->estats.rx_dropped_stack; | ||
1603 | next: | ||
1604 | ++dev->stats.rx_packets; | ||
1605 | skip: | ||
1606 | dev->stats.rx_bytes += len; | ||
1607 | slot = (slot + 1) % NUM_RX_BUFF; | ||
1608 | --budget; | ||
1609 | ++received; | ||
1610 | continue; | ||
1611 | sg: | ||
1612 | if (ctrl & MAL_RX_CTRL_FIRST) { | ||
1613 | BUG_ON(dev->rx_sg_skb); | ||
1614 | if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) { | ||
1615 | DBG(dev, "rx OOM %d" NL, slot); | ||
1616 | ++dev->estats.rx_dropped_oom; | ||
1617 | emac_recycle_rx_skb(dev, slot, 0); | ||
1618 | } else { | ||
1619 | dev->rx_sg_skb = skb; | ||
1620 | skb_put(skb, len); | ||
1621 | } | ||
1622 | } else if (!emac_rx_sg_append(dev, slot) && | ||
1623 | (ctrl & MAL_RX_CTRL_LAST)) { | ||
1624 | |||
1625 | skb = dev->rx_sg_skb; | ||
1626 | dev->rx_sg_skb = NULL; | ||
1627 | |||
1628 | ctrl &= EMAC_BAD_RX_MASK; | ||
1629 | if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { | ||
1630 | emac_parse_rx_error(dev, ctrl); | ||
1631 | ++dev->estats.rx_dropped_error; | ||
1632 | dev_kfree_skb(skb); | ||
1633 | len = 0; | ||
1634 | } else | ||
1635 | goto push_packet; | ||
1636 | } | ||
1637 | goto skip; | ||
1638 | oom: | ||
1639 | DBG(dev, "rx OOM %d" NL, slot); | ||
1640 | /* Drop the packet and recycle skb */ | ||
1641 | ++dev->estats.rx_dropped_oom; | ||
1642 | emac_recycle_rx_skb(dev, slot, 0); | ||
1643 | goto next; | ||
1644 | } | ||
1645 | |||
1646 | if (received) { | ||
1647 | DBG2(dev, "rx %d BDs" NL, received); | ||
1648 | dev->rx_slot = slot; | ||
1649 | } | ||
1650 | |||
1651 | if (unlikely(budget && test_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags))) { | ||
1652 | mb(); | ||
1653 | if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) { | ||
1654 | DBG2(dev, "rx restart" NL); | ||
1655 | received = 0; | ||
1656 | goto again; | ||
1657 | } | ||
1658 | |||
1659 | if (dev->rx_sg_skb) { | ||
1660 | DBG2(dev, "dropping partial rx packet" NL); | ||
1661 | ++dev->estats.rx_dropped_error; | ||
1662 | dev_kfree_skb(dev->rx_sg_skb); | ||
1663 | dev->rx_sg_skb = NULL; | ||
1664 | } | ||
1665 | |||
1666 | clear_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags); | ||
1667 | mal_enable_rx_channel(dev->mal, dev->mal_rx_chan); | ||
1668 | emac_rx_enable(dev); | ||
1669 | dev->rx_slot = 0; | ||
1670 | } | ||
1671 | return received; | ||
1672 | } | ||
1673 | |||
1674 | /* NAPI poll context */ | ||
1675 | static int emac_peek_rx(void *param) | ||
1676 | { | ||
1677 | struct emac_instance *dev = param; | ||
1678 | |||
1679 | return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY); | ||
1680 | } | ||
1681 | |||
1682 | /* NAPI poll context */ | ||
1683 | static int emac_peek_rx_sg(void *param) | ||
1684 | { | ||
1685 | struct emac_instance *dev = param; | ||
1686 | |||
1687 | int slot = dev->rx_slot; | ||
1688 | while (1) { | ||
1689 | u16 ctrl = dev->rx_desc[slot].ctrl; | ||
1690 | if (ctrl & MAL_RX_CTRL_EMPTY) | ||
1691 | return 0; | ||
1692 | else if (ctrl & MAL_RX_CTRL_LAST) | ||
1693 | return 1; | ||
1694 | |||
1695 | slot = (slot + 1) % NUM_RX_BUFF; | ||
1696 | |||
1697 | /* I'm just being paranoid here :) */ | ||
1698 | if (unlikely(slot == dev->rx_slot)) | ||
1699 | return 0; | ||
1700 | } | ||
1701 | } | ||
1702 | |||
1703 | /* Hard IRQ */ | ||
1704 | static void emac_rxde(void *param) | ||
1705 | { | ||
1706 | struct emac_instance *dev = param; | ||
1707 | |||
1708 | ++dev->estats.rx_stopped; | ||
1709 | emac_rx_disable_async(dev); | ||
1710 | } | ||
1711 | |||
1712 | /* Hard IRQ */ | ||
1713 | static irqreturn_t emac_irq(int irq, void *dev_instance) | ||
1714 | { | ||
1715 | struct emac_instance *dev = dev_instance; | ||
1716 | struct emac_regs __iomem *p = dev->emacp; | ||
1717 | struct emac_error_stats *st = &dev->estats; | ||
1718 | u32 isr; | ||
1719 | |||
1720 | spin_lock(&dev->lock); | ||
1721 | |||
1722 | isr = in_be32(&p->isr); | ||
1723 | out_be32(&p->isr, isr); | ||
1724 | |||
1725 | DBG(dev, "isr = %08x" NL, isr); | ||
1726 | |||
1727 | if (isr & EMAC4_ISR_TXPE) | ||
1728 | ++st->tx_parity; | ||
1729 | if (isr & EMAC4_ISR_RXPE) | ||
1730 | ++st->rx_parity; | ||
1731 | if (isr & EMAC4_ISR_TXUE) | ||
1732 | ++st->tx_underrun; | ||
1733 | if (isr & EMAC4_ISR_RXOE) | ||
1734 | ++st->rx_fifo_overrun; | ||
1735 | if (isr & EMAC_ISR_OVR) | ||
1736 | ++st->rx_overrun; | ||
1737 | if (isr & EMAC_ISR_BP) | ||
1738 | ++st->rx_bad_packet; | ||
1739 | if (isr & EMAC_ISR_RP) | ||
1740 | ++st->rx_runt_packet; | ||
1741 | if (isr & EMAC_ISR_SE) | ||
1742 | ++st->rx_short_event; | ||
1743 | if (isr & EMAC_ISR_ALE) | ||
1744 | ++st->rx_alignment_error; | ||
1745 | if (isr & EMAC_ISR_BFCS) | ||
1746 | ++st->rx_bad_fcs; | ||
1747 | if (isr & EMAC_ISR_PTLE) | ||
1748 | ++st->rx_packet_too_long; | ||
1749 | if (isr & EMAC_ISR_ORE) | ||
1750 | ++st->rx_out_of_range; | ||
1751 | if (isr & EMAC_ISR_IRE) | ||
1752 | ++st->rx_in_range; | ||
1753 | if (isr & EMAC_ISR_SQE) | ||
1754 | ++st->tx_sqe; | ||
1755 | if (isr & EMAC_ISR_TE) | ||
1756 | ++st->tx_errors; | ||
1757 | |||
1758 | spin_unlock(&dev->lock); | ||
1759 | |||
1760 | return IRQ_HANDLED; | ||
1761 | } | ||
1762 | |||
1763 | static struct net_device_stats *emac_stats(struct net_device *ndev) | ||
1764 | { | ||
1765 | struct emac_instance *dev = netdev_priv(ndev); | ||
1766 | struct emac_stats *st = &dev->stats; | ||
1767 | struct emac_error_stats *est = &dev->estats; | ||
1768 | struct net_device_stats *nst = &dev->nstats; | ||
1769 | unsigned long flags; | ||
1770 | |||
1771 | DBG2(dev, "stats" NL); | ||
1772 | |||
1773 | /* Compute "legacy" statistics */ | ||
1774 | spin_lock_irqsave(&dev->lock, flags); | ||
1775 | nst->rx_packets = (unsigned long)st->rx_packets; | ||
1776 | nst->rx_bytes = (unsigned long)st->rx_bytes; | ||
1777 | nst->tx_packets = (unsigned long)st->tx_packets; | ||
1778 | nst->tx_bytes = (unsigned long)st->tx_bytes; | ||
1779 | nst->rx_dropped = (unsigned long)(est->rx_dropped_oom + | ||
1780 | est->rx_dropped_error + | ||
1781 | est->rx_dropped_resize + | ||
1782 | est->rx_dropped_mtu); | ||
1783 | nst->tx_dropped = (unsigned long)est->tx_dropped; | ||
1784 | |||
1785 | nst->rx_errors = (unsigned long)est->rx_bd_errors; | ||
1786 | nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun + | ||
1787 | est->rx_fifo_overrun + | ||
1788 | est->rx_overrun); | ||
1789 | nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error + | ||
1790 | est->rx_alignment_error); | ||
1791 | nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs + | ||
1792 | est->rx_bad_fcs); | ||
1793 | nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet + | ||
1794 | est->rx_bd_short_event + | ||
1795 | est->rx_bd_packet_too_long + | ||
1796 | est->rx_bd_out_of_range + | ||
1797 | est->rx_bd_in_range + | ||
1798 | est->rx_runt_packet + | ||
1799 | est->rx_short_event + | ||
1800 | est->rx_packet_too_long + | ||
1801 | est->rx_out_of_range + | ||
1802 | est->rx_in_range); | ||
1803 | |||
1804 | nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors); | ||
1805 | nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun + | ||
1806 | est->tx_underrun); | ||
1807 | nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss; | ||
1808 | nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral + | ||
1809 | est->tx_bd_excessive_collisions + | ||
1810 | est->tx_bd_late_collision + | ||
1811 | est->tx_bd_multple_collisions); | ||
1812 | spin_unlock_irqrestore(&dev->lock, flags); | ||
1813 | return nst; | ||
1814 | } | ||
1815 | |||
1816 | static struct mal_commac_ops emac_commac_ops = { | ||
1817 | .poll_tx = &emac_poll_tx, | ||
1818 | .poll_rx = &emac_poll_rx, | ||
1819 | .peek_rx = &emac_peek_rx, | ||
1820 | .rxde = &emac_rxde, | ||
1821 | }; | ||
1822 | |||
1823 | static struct mal_commac_ops emac_commac_sg_ops = { | ||
1824 | .poll_tx = &emac_poll_tx, | ||
1825 | .poll_rx = &emac_poll_rx, | ||
1826 | .peek_rx = &emac_peek_rx_sg, | ||
1827 | .rxde = &emac_rxde, | ||
1828 | }; | ||
1829 | |||
1830 | /* Ethtool support */ | ||
1831 | static int emac_ethtool_get_settings(struct net_device *ndev, | ||
1832 | struct ethtool_cmd *cmd) | ||
1833 | { | ||
1834 | struct emac_instance *dev = netdev_priv(ndev); | ||
1835 | |||
1836 | cmd->supported = dev->phy.features; | ||
1837 | cmd->port = PORT_MII; | ||
1838 | cmd->phy_address = dev->phy.address; | ||
1839 | cmd->transceiver = | ||
1840 | dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL; | ||
1841 | |||
1842 | mutex_lock(&dev->link_lock); | ||
1843 | cmd->advertising = dev->phy.advertising; | ||
1844 | cmd->autoneg = dev->phy.autoneg; | ||
1845 | cmd->speed = dev->phy.speed; | ||
1846 | cmd->duplex = dev->phy.duplex; | ||
1847 | mutex_unlock(&dev->link_lock); | ||
1848 | |||
1849 | return 0; | ||
1850 | } | ||
1851 | |||
1852 | static int emac_ethtool_set_settings(struct net_device *ndev, | ||
1853 | struct ethtool_cmd *cmd) | ||
1854 | { | ||
1855 | struct emac_instance *dev = netdev_priv(ndev); | ||
1856 | u32 f = dev->phy.features; | ||
1857 | |||
1858 | DBG(dev, "set_settings(%d, %d, %d, 0x%08x)" NL, | ||
1859 | cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising); | ||
1860 | |||
1861 | /* Basic sanity checks */ | ||
1862 | if (dev->phy.address < 0) | ||
1863 | return -EOPNOTSUPP; | ||
1864 | if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE) | ||
1865 | return -EINVAL; | ||
1866 | if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0) | ||
1867 | return -EINVAL; | ||
1868 | if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) | ||
1869 | return -EINVAL; | ||
1870 | |||
1871 | if (cmd->autoneg == AUTONEG_DISABLE) { | ||
1872 | switch (cmd->speed) { | ||
1873 | case SPEED_10: | ||
1874 | if (cmd->duplex == DUPLEX_HALF | ||
1875 | && !(f & SUPPORTED_10baseT_Half)) | ||
1876 | return -EINVAL; | ||
1877 | if (cmd->duplex == DUPLEX_FULL | ||
1878 | && !(f & SUPPORTED_10baseT_Full)) | ||
1879 | return -EINVAL; | ||
1880 | break; | ||
1881 | case SPEED_100: | ||
1882 | if (cmd->duplex == DUPLEX_HALF | ||
1883 | && !(f & SUPPORTED_100baseT_Half)) | ||
1884 | return -EINVAL; | ||
1885 | if (cmd->duplex == DUPLEX_FULL | ||
1886 | && !(f & SUPPORTED_100baseT_Full)) | ||
1887 | return -EINVAL; | ||
1888 | break; | ||
1889 | case SPEED_1000: | ||
1890 | if (cmd->duplex == DUPLEX_HALF | ||
1891 | && !(f & SUPPORTED_1000baseT_Half)) | ||
1892 | return -EINVAL; | ||
1893 | if (cmd->duplex == DUPLEX_FULL | ||
1894 | && !(f & SUPPORTED_1000baseT_Full)) | ||
1895 | return -EINVAL; | ||
1896 | break; | ||
1897 | default: | ||
1898 | return -EINVAL; | ||
1899 | } | ||
1900 | |||
1901 | mutex_lock(&dev->link_lock); | ||
1902 | dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed, | ||
1903 | cmd->duplex); | ||
1904 | mutex_unlock(&dev->link_lock); | ||
1905 | |||
1906 | } else { | ||
1907 | if (!(f & SUPPORTED_Autoneg)) | ||
1908 | return -EINVAL; | ||
1909 | |||
1910 | mutex_lock(&dev->link_lock); | ||
1911 | dev->phy.def->ops->setup_aneg(&dev->phy, | ||
1912 | (cmd->advertising & f) | | ||
1913 | (dev->phy.advertising & | ||
1914 | (ADVERTISED_Pause | | ||
1915 | ADVERTISED_Asym_Pause))); | ||
1916 | mutex_unlock(&dev->link_lock); | ||
1917 | } | ||
1918 | emac_force_link_update(dev); | ||
1919 | |||
1920 | return 0; | ||
1921 | } | ||
1922 | |||
1923 | static void emac_ethtool_get_ringparam(struct net_device *ndev, | ||
1924 | struct ethtool_ringparam *rp) | ||
1925 | { | ||
1926 | rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF; | ||
1927 | rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF; | ||
1928 | } | ||
1929 | |||
1930 | static void emac_ethtool_get_pauseparam(struct net_device *ndev, | ||
1931 | struct ethtool_pauseparam *pp) | ||
1932 | { | ||
1933 | struct emac_instance *dev = netdev_priv(ndev); | ||
1934 | |||
1935 | mutex_lock(&dev->link_lock); | ||
1936 | if ((dev->phy.features & SUPPORTED_Autoneg) && | ||
1937 | (dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause))) | ||
1938 | pp->autoneg = 1; | ||
1939 | |||
1940 | if (dev->phy.duplex == DUPLEX_FULL) { | ||
1941 | if (dev->phy.pause) | ||
1942 | pp->rx_pause = pp->tx_pause = 1; | ||
1943 | else if (dev->phy.asym_pause) | ||
1944 | pp->tx_pause = 1; | ||
1945 | } | ||
1946 | mutex_unlock(&dev->link_lock); | ||
1947 | } | ||
1948 | |||
1949 | static u32 emac_ethtool_get_rx_csum(struct net_device *ndev) | ||
1950 | { | ||
1951 | struct emac_instance *dev = netdev_priv(ndev); | ||
1952 | |||
1953 | return dev->tah_dev != 0; | ||
1954 | } | ||
1955 | |||
1956 | static int emac_get_regs_len(struct emac_instance *dev) | ||
1957 | { | ||
1958 | if (emac_has_feature(dev, EMAC_FTR_EMAC4)) | ||
1959 | return sizeof(struct emac_ethtool_regs_subhdr) + | ||
1960 | EMAC4_ETHTOOL_REGS_SIZE; | ||
1961 | else | ||
1962 | return sizeof(struct emac_ethtool_regs_subhdr) + | ||
1963 | EMAC_ETHTOOL_REGS_SIZE; | ||
1964 | } | ||
1965 | |||
1966 | static int emac_ethtool_get_regs_len(struct net_device *ndev) | ||
1967 | { | ||
1968 | struct emac_instance *dev = netdev_priv(ndev); | ||
1969 | int size; | ||
1970 | |||
1971 | size = sizeof(struct emac_ethtool_regs_hdr) + | ||
1972 | emac_get_regs_len(dev) + mal_get_regs_len(dev->mal); | ||
1973 | if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) | ||
1974 | size += zmii_get_regs_len(dev->zmii_dev); | ||
1975 | if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) | ||
1976 | size += rgmii_get_regs_len(dev->rgmii_dev); | ||
1977 | if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) | ||
1978 | size += tah_get_regs_len(dev->tah_dev); | ||
1979 | |||
1980 | return size; | ||
1981 | } | ||
1982 | |||
1983 | static void *emac_dump_regs(struct emac_instance *dev, void *buf) | ||
1984 | { | ||
1985 | struct emac_ethtool_regs_subhdr *hdr = buf; | ||
1986 | |||
1987 | hdr->index = dev->cell_index; | ||
1988 | if (emac_has_feature(dev, EMAC_FTR_EMAC4)) { | ||
1989 | hdr->version = EMAC4_ETHTOOL_REGS_VER; | ||
1990 | memcpy_fromio(hdr + 1, dev->emacp, EMAC4_ETHTOOL_REGS_SIZE); | ||
1991 | return ((void *)(hdr + 1) + EMAC4_ETHTOOL_REGS_SIZE); | ||
1992 | } else { | ||
1993 | hdr->version = EMAC_ETHTOOL_REGS_VER; | ||
1994 | memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE); | ||
1995 | return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE); | ||
1996 | } | ||
1997 | } | ||
1998 | |||
1999 | static void emac_ethtool_get_regs(struct net_device *ndev, | ||
2000 | struct ethtool_regs *regs, void *buf) | ||
2001 | { | ||
2002 | struct emac_instance *dev = netdev_priv(ndev); | ||
2003 | struct emac_ethtool_regs_hdr *hdr = buf; | ||
2004 | |||
2005 | hdr->components = 0; | ||
2006 | buf = hdr + 1; | ||
2007 | |||
2008 | buf = mal_dump_regs(dev->mal, buf); | ||
2009 | buf = emac_dump_regs(dev, buf); | ||
2010 | if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) { | ||
2011 | hdr->components |= EMAC_ETHTOOL_REGS_ZMII; | ||
2012 | buf = zmii_dump_regs(dev->zmii_dev, buf); | ||
2013 | } | ||
2014 | if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) { | ||
2015 | hdr->components |= EMAC_ETHTOOL_REGS_RGMII; | ||
2016 | buf = rgmii_dump_regs(dev->rgmii_dev, buf); | ||
2017 | } | ||
2018 | if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) { | ||
2019 | hdr->components |= EMAC_ETHTOOL_REGS_TAH; | ||
2020 | buf = tah_dump_regs(dev->tah_dev, buf); | ||
2021 | } | ||
2022 | } | ||
2023 | |||
2024 | static int emac_ethtool_nway_reset(struct net_device *ndev) | ||
2025 | { | ||
2026 | struct emac_instance *dev = netdev_priv(ndev); | ||
2027 | int res = 0; | ||
2028 | |||
2029 | DBG(dev, "nway_reset" NL); | ||
2030 | |||
2031 | if (dev->phy.address < 0) | ||
2032 | return -EOPNOTSUPP; | ||
2033 | |||
2034 | mutex_lock(&dev->link_lock); | ||
2035 | if (!dev->phy.autoneg) { | ||
2036 | res = -EINVAL; | ||
2037 | goto out; | ||
2038 | } | ||
2039 | |||
2040 | dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising); | ||
2041 | out: | ||
2042 | mutex_unlock(&dev->link_lock); | ||
2043 | emac_force_link_update(dev); | ||
2044 | return res; | ||
2045 | } | ||
2046 | |||
2047 | static int emac_ethtool_get_stats_count(struct net_device *ndev) | ||
2048 | { | ||
2049 | return EMAC_ETHTOOL_STATS_COUNT; | ||
2050 | } | ||
2051 | |||
2052 | static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset, | ||
2053 | u8 * buf) | ||
2054 | { | ||
2055 | if (stringset == ETH_SS_STATS) | ||
2056 | memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys)); | ||
2057 | } | ||
2058 | |||
2059 | static void emac_ethtool_get_ethtool_stats(struct net_device *ndev, | ||
2060 | struct ethtool_stats *estats, | ||
2061 | u64 * tmp_stats) | ||
2062 | { | ||
2063 | struct emac_instance *dev = netdev_priv(ndev); | ||
2064 | |||
2065 | memcpy(tmp_stats, &dev->stats, sizeof(dev->stats)); | ||
2066 | tmp_stats += sizeof(dev->stats) / sizeof(u64); | ||
2067 | memcpy(tmp_stats, &dev->estats, sizeof(dev->estats)); | ||
2068 | } | ||
2069 | |||
2070 | static void emac_ethtool_get_drvinfo(struct net_device *ndev, | ||
2071 | struct ethtool_drvinfo *info) | ||
2072 | { | ||
2073 | struct emac_instance *dev = netdev_priv(ndev); | ||
2074 | |||
2075 | strcpy(info->driver, "ibm_emac"); | ||
2076 | strcpy(info->version, DRV_VERSION); | ||
2077 | info->fw_version[0] = '\0'; | ||
2078 | sprintf(info->bus_info, "PPC 4xx EMAC-%d %s", | ||
2079 | dev->cell_index, dev->ofdev->node->full_name); | ||
2080 | info->n_stats = emac_ethtool_get_stats_count(ndev); | ||
2081 | info->regdump_len = emac_ethtool_get_regs_len(ndev); | ||
2082 | } | ||
2083 | |||
2084 | static const struct ethtool_ops emac_ethtool_ops = { | ||
2085 | .get_settings = emac_ethtool_get_settings, | ||
2086 | .set_settings = emac_ethtool_set_settings, | ||
2087 | .get_drvinfo = emac_ethtool_get_drvinfo, | ||
2088 | |||
2089 | .get_regs_len = emac_ethtool_get_regs_len, | ||
2090 | .get_regs = emac_ethtool_get_regs, | ||
2091 | |||
2092 | .nway_reset = emac_ethtool_nway_reset, | ||
2093 | |||
2094 | .get_ringparam = emac_ethtool_get_ringparam, | ||
2095 | .get_pauseparam = emac_ethtool_get_pauseparam, | ||
2096 | |||
2097 | .get_rx_csum = emac_ethtool_get_rx_csum, | ||
2098 | |||
2099 | .get_strings = emac_ethtool_get_strings, | ||
2100 | .get_stats_count = emac_ethtool_get_stats_count, | ||
2101 | .get_ethtool_stats = emac_ethtool_get_ethtool_stats, | ||
2102 | |||
2103 | .get_link = ethtool_op_get_link, | ||
2104 | .get_tx_csum = ethtool_op_get_tx_csum, | ||
2105 | .get_sg = ethtool_op_get_sg, | ||
2106 | }; | ||
2107 | |||
2108 | static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) | ||
2109 | { | ||
2110 | struct emac_instance *dev = netdev_priv(ndev); | ||
2111 | uint16_t *data = (uint16_t *) & rq->ifr_ifru; | ||
2112 | |||
2113 | DBG(dev, "ioctl %08x" NL, cmd); | ||
2114 | |||
2115 | if (dev->phy.address < 0) | ||
2116 | return -EOPNOTSUPP; | ||
2117 | |||
2118 | switch (cmd) { | ||
2119 | case SIOCGMIIPHY: | ||
2120 | case SIOCDEVPRIVATE: | ||
2121 | data[0] = dev->phy.address; | ||
2122 | /* Fall through */ | ||
2123 | case SIOCGMIIREG: | ||
2124 | case SIOCDEVPRIVATE + 1: | ||
2125 | data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]); | ||
2126 | return 0; | ||
2127 | |||
2128 | case SIOCSMIIREG: | ||
2129 | case SIOCDEVPRIVATE + 2: | ||
2130 | if (!capable(CAP_NET_ADMIN)) | ||
2131 | return -EPERM; | ||
2132 | emac_mdio_write(ndev, dev->phy.address, data[1], data[2]); | ||
2133 | return 0; | ||
2134 | default: | ||
2135 | return -EOPNOTSUPP; | ||
2136 | } | ||
2137 | } | ||
2138 | |||
2139 | struct emac_depentry { | ||
2140 | u32 phandle; | ||
2141 | struct device_node *node; | ||
2142 | struct of_device *ofdev; | ||
2143 | void *drvdata; | ||
2144 | }; | ||
2145 | |||
2146 | #define EMAC_DEP_MAL_IDX 0 | ||
2147 | #define EMAC_DEP_ZMII_IDX 1 | ||
2148 | #define EMAC_DEP_RGMII_IDX 2 | ||
2149 | #define EMAC_DEP_TAH_IDX 3 | ||
2150 | #define EMAC_DEP_MDIO_IDX 4 | ||
2151 | #define EMAC_DEP_PREV_IDX 5 | ||
2152 | #define EMAC_DEP_COUNT 6 | ||
2153 | |||
2154 | static int __devinit emac_check_deps(struct emac_instance *dev, | ||
2155 | struct emac_depentry *deps) | ||
2156 | { | ||
2157 | int i, there = 0; | ||
2158 | struct device_node *np; | ||
2159 | |||
2160 | for (i = 0; i < EMAC_DEP_COUNT; i++) { | ||
2161 | /* no dependency on that item, allright */ | ||
2162 | if (deps[i].phandle == 0) { | ||
2163 | there++; | ||
2164 | continue; | ||
2165 | } | ||
2166 | /* special case for blist as the dependency might go away */ | ||
2167 | if (i == EMAC_DEP_PREV_IDX) { | ||
2168 | np = *(dev->blist - 1); | ||
2169 | if (np == NULL) { | ||
2170 | deps[i].phandle = 0; | ||
2171 | there++; | ||
2172 | continue; | ||
2173 | } | ||
2174 | if (deps[i].node == NULL) | ||
2175 | deps[i].node = of_node_get(np); | ||
2176 | } | ||
2177 | if (deps[i].node == NULL) | ||
2178 | deps[i].node = of_find_node_by_phandle(deps[i].phandle); | ||
2179 | if (deps[i].node == NULL) | ||
2180 | continue; | ||
2181 | if (deps[i].ofdev == NULL) | ||
2182 | deps[i].ofdev = of_find_device_by_node(deps[i].node); | ||
2183 | if (deps[i].ofdev == NULL) | ||
2184 | continue; | ||
2185 | if (deps[i].drvdata == NULL) | ||
2186 | deps[i].drvdata = dev_get_drvdata(&deps[i].ofdev->dev); | ||
2187 | if (deps[i].drvdata != NULL) | ||
2188 | there++; | ||
2189 | } | ||
2190 | return (there == EMAC_DEP_COUNT); | ||
2191 | } | ||
2192 | |||
2193 | static void emac_put_deps(struct emac_instance *dev) | ||
2194 | { | ||
2195 | if (dev->mal_dev) | ||
2196 | of_dev_put(dev->mal_dev); | ||
2197 | if (dev->zmii_dev) | ||
2198 | of_dev_put(dev->zmii_dev); | ||
2199 | if (dev->rgmii_dev) | ||
2200 | of_dev_put(dev->rgmii_dev); | ||
2201 | if (dev->mdio_dev) | ||
2202 | of_dev_put(dev->mdio_dev); | ||
2203 | if (dev->tah_dev) | ||
2204 | of_dev_put(dev->tah_dev); | ||
2205 | } | ||
2206 | |||
2207 | static int __devinit emac_of_bus_notify(struct notifier_block *nb, | ||
2208 | unsigned long action, void *data) | ||
2209 | { | ||
2210 | /* We are only intereted in device addition */ | ||
2211 | if (action == BUS_NOTIFY_BOUND_DRIVER) | ||
2212 | wake_up_all(&emac_probe_wait); | ||
2213 | return 0; | ||
2214 | } | ||
2215 | |||
2216 | static struct notifier_block emac_of_bus_notifier = { | ||
2217 | .notifier_call = emac_of_bus_notify | ||
2218 | }; | ||
2219 | |||
2220 | static int __devinit emac_wait_deps(struct emac_instance *dev) | ||
2221 | { | ||
2222 | struct emac_depentry deps[EMAC_DEP_COUNT]; | ||
2223 | int i, err; | ||
2224 | |||
2225 | memset(&deps, 0, sizeof(deps)); | ||
2226 | |||
2227 | deps[EMAC_DEP_MAL_IDX].phandle = dev->mal_ph; | ||
2228 | deps[EMAC_DEP_ZMII_IDX].phandle = dev->zmii_ph; | ||
2229 | deps[EMAC_DEP_RGMII_IDX].phandle = dev->rgmii_ph; | ||
2230 | if (dev->tah_ph) | ||
2231 | deps[EMAC_DEP_TAH_IDX].phandle = dev->tah_ph; | ||
2232 | if (dev->mdio_ph) | ||
2233 | deps[EMAC_DEP_MDIO_IDX].phandle = dev->mdio_ph; | ||
2234 | if (dev->blist && dev->blist > emac_boot_list) | ||
2235 | deps[EMAC_DEP_PREV_IDX].phandle = 0xffffffffu; | ||
2236 | bus_register_notifier(&of_platform_bus_type, &emac_of_bus_notifier); | ||
2237 | wait_event_timeout(emac_probe_wait, | ||
2238 | emac_check_deps(dev, deps), | ||
2239 | EMAC_PROBE_DEP_TIMEOUT); | ||
2240 | bus_unregister_notifier(&of_platform_bus_type, &emac_of_bus_notifier); | ||
2241 | err = emac_check_deps(dev, deps) ? 0 : -ENODEV; | ||
2242 | for (i = 0; i < EMAC_DEP_COUNT; i++) { | ||
2243 | if (deps[i].node) | ||
2244 | of_node_put(deps[i].node); | ||
2245 | if (err && deps[i].ofdev) | ||
2246 | of_dev_put(deps[i].ofdev); | ||
2247 | } | ||
2248 | if (err == 0) { | ||
2249 | dev->mal_dev = deps[EMAC_DEP_MAL_IDX].ofdev; | ||
2250 | dev->zmii_dev = deps[EMAC_DEP_ZMII_IDX].ofdev; | ||
2251 | dev->rgmii_dev = deps[EMAC_DEP_RGMII_IDX].ofdev; | ||
2252 | dev->tah_dev = deps[EMAC_DEP_TAH_IDX].ofdev; | ||
2253 | dev->mdio_dev = deps[EMAC_DEP_MDIO_IDX].ofdev; | ||
2254 | } | ||
2255 | if (deps[EMAC_DEP_PREV_IDX].ofdev) | ||
2256 | of_dev_put(deps[EMAC_DEP_PREV_IDX].ofdev); | ||
2257 | return err; | ||
2258 | } | ||
2259 | |||
2260 | static int __devinit emac_read_uint_prop(struct device_node *np, const char *name, | ||
2261 | u32 *val, int fatal) | ||
2262 | { | ||
2263 | int len; | ||
2264 | const u32 *prop = of_get_property(np, name, &len); | ||
2265 | if (prop == NULL || len < sizeof(u32)) { | ||
2266 | if (fatal) | ||
2267 | printk(KERN_ERR "%s: missing %s property\n", | ||
2268 | np->full_name, name); | ||
2269 | return -ENODEV; | ||
2270 | } | ||
2271 | *val = *prop; | ||
2272 | return 0; | ||
2273 | } | ||
2274 | |||
2275 | static int __devinit emac_init_phy(struct emac_instance *dev) | ||
2276 | { | ||
2277 | struct device_node *np = dev->ofdev->node; | ||
2278 | struct net_device *ndev = dev->ndev; | ||
2279 | u32 phy_map, adv; | ||
2280 | int i; | ||
2281 | |||
2282 | dev->phy.dev = ndev; | ||
2283 | dev->phy.mode = dev->phy_mode; | ||
2284 | |||
2285 | /* PHY-less configuration. | ||
2286 | * XXX I probably should move these settings to the dev tree | ||
2287 | */ | ||
2288 | if (dev->phy_address == 0xffffffff && dev->phy_map == 0xffffffff) { | ||
2289 | emac_reset(dev); | ||
2290 | |||
2291 | /* PHY-less configuration. | ||
2292 | * XXX I probably should move these settings to the dev tree | ||
2293 | */ | ||
2294 | dev->phy.address = -1; | ||
2295 | dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII; | ||
2296 | dev->phy.pause = 1; | ||
2297 | |||
2298 | return 0; | ||
2299 | } | ||
2300 | |||
2301 | mutex_lock(&emac_phy_map_lock); | ||
2302 | phy_map = dev->phy_map | busy_phy_map; | ||
2303 | |||
2304 | DBG(dev, "PHY maps %08x %08x" NL, dev->phy_map, busy_phy_map); | ||
2305 | |||
2306 | dev->phy.mdio_read = emac_mdio_read; | ||
2307 | dev->phy.mdio_write = emac_mdio_write; | ||
2308 | |||
2309 | /* Configure EMAC with defaults so we can at least use MDIO | ||
2310 | * This is needed mostly for 440GX | ||
2311 | */ | ||
2312 | if (emac_phy_gpcs(dev->phy.mode)) { | ||
2313 | /* XXX | ||
2314 | * Make GPCS PHY address equal to EMAC index. | ||
2315 | * We probably should take into account busy_phy_map | ||
2316 | * and/or phy_map here. | ||
2317 | * | ||
2318 | * Note that the busy_phy_map is currently global | ||
2319 | * while it should probably be per-ASIC... | ||
2320 | */ | ||
2321 | dev->phy.address = dev->cell_index; | ||
2322 | } | ||
2323 | |||
2324 | emac_configure(dev); | ||
2325 | |||
2326 | if (dev->phy_address != 0xffffffff) | ||
2327 | phy_map = ~(1 << dev->phy_address); | ||
2328 | |||
2329 | for (i = 0; i < 0x20; phy_map >>= 1, ++i) | ||
2330 | if (!(phy_map & 1)) { | ||
2331 | int r; | ||
2332 | busy_phy_map |= 1 << i; | ||
2333 | |||
2334 | /* Quick check if there is a PHY at the address */ | ||
2335 | r = emac_mdio_read(dev->ndev, i, MII_BMCR); | ||
2336 | if (r == 0xffff || r < 0) | ||
2337 | continue; | ||
2338 | if (!emac_mii_phy_probe(&dev->phy, i)) | ||
2339 | break; | ||
2340 | } | ||
2341 | mutex_unlock(&emac_phy_map_lock); | ||
2342 | if (i == 0x20) { | ||
2343 | printk(KERN_WARNING "%s: can't find PHY!\n", np->full_name); | ||
2344 | return -ENXIO; | ||
2345 | } | ||
2346 | |||
2347 | /* Init PHY */ | ||
2348 | if (dev->phy.def->ops->init) | ||
2349 | dev->phy.def->ops->init(&dev->phy); | ||
2350 | |||
2351 | /* Disable any PHY features not supported by the platform */ | ||
2352 | dev->phy.def->features &= ~dev->phy_feat_exc; | ||
2353 | |||
2354 | /* Setup initial link parameters */ | ||
2355 | if (dev->phy.features & SUPPORTED_Autoneg) { | ||
2356 | adv = dev->phy.features; | ||
2357 | if (!emac_has_feature(dev, EMAC_FTR_NO_FLOW_CONTROL_40x)) | ||
2358 | adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause; | ||
2359 | /* Restart autonegotiation */ | ||
2360 | dev->phy.def->ops->setup_aneg(&dev->phy, adv); | ||
2361 | } else { | ||
2362 | u32 f = dev->phy.def->features; | ||
2363 | int speed = SPEED_10, fd = DUPLEX_HALF; | ||
2364 | |||
2365 | /* Select highest supported speed/duplex */ | ||
2366 | if (f & SUPPORTED_1000baseT_Full) { | ||
2367 | speed = SPEED_1000; | ||
2368 | fd = DUPLEX_FULL; | ||
2369 | } else if (f & SUPPORTED_1000baseT_Half) | ||
2370 | speed = SPEED_1000; | ||
2371 | else if (f & SUPPORTED_100baseT_Full) { | ||
2372 | speed = SPEED_100; | ||
2373 | fd = DUPLEX_FULL; | ||
2374 | } else if (f & SUPPORTED_100baseT_Half) | ||
2375 | speed = SPEED_100; | ||
2376 | else if (f & SUPPORTED_10baseT_Full) | ||
2377 | fd = DUPLEX_FULL; | ||
2378 | |||
2379 | /* Force link parameters */ | ||
2380 | dev->phy.def->ops->setup_forced(&dev->phy, speed, fd); | ||
2381 | } | ||
2382 | return 0; | ||
2383 | } | ||
2384 | |||
2385 | static int __devinit emac_init_config(struct emac_instance *dev) | ||
2386 | { | ||
2387 | struct device_node *np = dev->ofdev->node; | ||
2388 | const void *p; | ||
2389 | unsigned int plen; | ||
2390 | const char *pm, *phy_modes[] = { | ||
2391 | [PHY_MODE_NA] = "", | ||
2392 | [PHY_MODE_MII] = "mii", | ||
2393 | [PHY_MODE_RMII] = "rmii", | ||
2394 | [PHY_MODE_SMII] = "smii", | ||
2395 | [PHY_MODE_RGMII] = "rgmii", | ||
2396 | [PHY_MODE_TBI] = "tbi", | ||
2397 | [PHY_MODE_GMII] = "gmii", | ||
2398 | [PHY_MODE_RTBI] = "rtbi", | ||
2399 | [PHY_MODE_SGMII] = "sgmii", | ||
2400 | }; | ||
2401 | |||
2402 | /* Read config from device-tree */ | ||
2403 | if (emac_read_uint_prop(np, "mal-device", &dev->mal_ph, 1)) | ||
2404 | return -ENXIO; | ||
2405 | if (emac_read_uint_prop(np, "mal-tx-channel", &dev->mal_tx_chan, 1)) | ||
2406 | return -ENXIO; | ||
2407 | if (emac_read_uint_prop(np, "mal-rx-channel", &dev->mal_rx_chan, 1)) | ||
2408 | return -ENXIO; | ||
2409 | if (emac_read_uint_prop(np, "cell-index", &dev->cell_index, 1)) | ||
2410 | return -ENXIO; | ||
2411 | if (emac_read_uint_prop(np, "max-frame-size", &dev->max_mtu, 0)) | ||
2412 | dev->max_mtu = 1500; | ||
2413 | if (emac_read_uint_prop(np, "rx-fifo-size", &dev->rx_fifo_size, 0)) | ||
2414 | dev->rx_fifo_size = 2048; | ||
2415 | if (emac_read_uint_prop(np, "tx-fifo-size", &dev->tx_fifo_size, 0)) | ||
2416 | dev->tx_fifo_size = 2048; | ||
2417 | if (emac_read_uint_prop(np, "rx-fifo-size-gige", &dev->rx_fifo_size_gige, 0)) | ||
2418 | dev->rx_fifo_size_gige = dev->rx_fifo_size; | ||
2419 | if (emac_read_uint_prop(np, "tx-fifo-size-gige", &dev->tx_fifo_size_gige, 0)) | ||
2420 | dev->tx_fifo_size_gige = dev->tx_fifo_size; | ||
2421 | if (emac_read_uint_prop(np, "phy-address", &dev->phy_address, 0)) | ||
2422 | dev->phy_address = 0xffffffff; | ||
2423 | if (emac_read_uint_prop(np, "phy-map", &dev->phy_map, 0)) | ||
2424 | dev->phy_map = 0xffffffff; | ||
2425 | if (emac_read_uint_prop(np->parent, "clock-frequency", &dev->opb_bus_freq, 1)) | ||
2426 | return -ENXIO; | ||
2427 | if (emac_read_uint_prop(np, "tah-device", &dev->tah_ph, 0)) | ||
2428 | dev->tah_ph = 0; | ||
2429 | if (emac_read_uint_prop(np, "tah-channel", &dev->tah_port, 0)) | ||
2430 | dev->tah_ph = 0; | ||
2431 | if (emac_read_uint_prop(np, "mdio-device", &dev->mdio_ph, 0)) | ||
2432 | dev->mdio_ph = 0; | ||
2433 | if (emac_read_uint_prop(np, "zmii-device", &dev->zmii_ph, 0)) | ||
2434 | dev->zmii_ph = 0;; | ||
2435 | if (emac_read_uint_prop(np, "zmii-channel", &dev->zmii_port, 0)) | ||
2436 | dev->zmii_port = 0xffffffff;; | ||
2437 | if (emac_read_uint_prop(np, "rgmii-device", &dev->rgmii_ph, 0)) | ||
2438 | dev->rgmii_ph = 0;; | ||
2439 | if (emac_read_uint_prop(np, "rgmii-channel", &dev->rgmii_port, 0)) | ||
2440 | dev->rgmii_port = 0xffffffff;; | ||
2441 | if (emac_read_uint_prop(np, "fifo-entry-size", &dev->fifo_entry_size, 0)) | ||
2442 | dev->fifo_entry_size = 16; | ||
2443 | if (emac_read_uint_prop(np, "mal-burst-size", &dev->mal_burst_size, 0)) | ||
2444 | dev->mal_burst_size = 256; | ||
2445 | |||
2446 | /* PHY mode needs some decoding */ | ||
2447 | dev->phy_mode = PHY_MODE_NA; | ||
2448 | pm = of_get_property(np, "phy-mode", &plen); | ||
2449 | if (pm != NULL) { | ||
2450 | int i; | ||
2451 | for (i = 0; i < ARRAY_SIZE(phy_modes); i++) | ||
2452 | if (!strcasecmp(pm, phy_modes[i])) { | ||
2453 | dev->phy_mode = i; | ||
2454 | break; | ||
2455 | } | ||
2456 | } | ||
2457 | |||
2458 | /* Backward compat with non-final DT */ | ||
2459 | if (dev->phy_mode == PHY_MODE_NA && pm != NULL && plen == 4) { | ||
2460 | u32 nmode = *(const u32 *)pm; | ||
2461 | if (nmode > PHY_MODE_NA && nmode <= PHY_MODE_SGMII) | ||
2462 | dev->phy_mode = nmode; | ||
2463 | } | ||
2464 | |||
2465 | /* Check EMAC version */ | ||
2466 | if (of_device_is_compatible(np, "ibm,emac4")) | ||
2467 | dev->features |= EMAC_FTR_EMAC4; | ||
2468 | if (of_device_is_compatible(np, "ibm,emac-axon") | ||
2469 | || of_device_is_compatible(np, "ibm,emac-440epx")) | ||
2470 | dev->features |= EMAC_FTR_HAS_AXON_STACR | ||
2471 | | EMAC_FTR_STACR_OC_INVERT; | ||
2472 | if (of_device_is_compatible(np, "ibm,emac-440spe")) | ||
2473 | dev->features |= EMAC_FTR_STACR_OC_INVERT; | ||
2474 | |||
2475 | /* Fixup some feature bits based on the device tree and verify | ||
2476 | * we have support for them compiled in | ||
2477 | */ | ||
2478 | if (dev->tah_ph != 0) { | ||
2479 | #ifdef CONFIG_IBM_NEW_EMAC_TAH | ||
2480 | dev->features |= EMAC_FTR_HAS_TAH; | ||
2481 | #else | ||
2482 | printk(KERN_ERR "%s: TAH support not enabled !\n", | ||
2483 | np->full_name); | ||
2484 | return -ENXIO; | ||
2485 | #endif | ||
2486 | } | ||
2487 | |||
2488 | if (dev->zmii_ph != 0) { | ||
2489 | #ifdef CONFIG_IBM_NEW_EMAC_ZMII | ||
2490 | dev->features |= EMAC_FTR_HAS_ZMII; | ||
2491 | #else | ||
2492 | printk(KERN_ERR "%s: ZMII support not enabled !\n", | ||
2493 | np->full_name); | ||
2494 | return -ENXIO; | ||
2495 | #endif | ||
2496 | } | ||
2497 | |||
2498 | if (dev->rgmii_ph != 0) { | ||
2499 | #ifdef CONFIG_IBM_NEW_EMAC_RGMII | ||
2500 | dev->features |= EMAC_FTR_HAS_RGMII; | ||
2501 | #else | ||
2502 | printk(KERN_ERR "%s: RGMII support not enabled !\n", | ||
2503 | np->full_name); | ||
2504 | return -ENXIO; | ||
2505 | #endif | ||
2506 | } | ||
2507 | |||
2508 | /* Read MAC-address */ | ||
2509 | p = of_get_property(np, "local-mac-address", NULL); | ||
2510 | if (p == NULL) { | ||
2511 | printk(KERN_ERR "%s: Can't find local-mac-address property\n", | ||
2512 | np->full_name); | ||
2513 | return -ENXIO; | ||
2514 | } | ||
2515 | memcpy(dev->ndev->dev_addr, p, 6); | ||
2516 | |||
2517 | DBG(dev, "features : 0x%08x / 0x%08x\n", dev->features, EMAC_FTRS_POSSIBLE); | ||
2518 | DBG(dev, "tx_fifo_size : %d (%d gige)\n", dev->tx_fifo_size, dev->tx_fifo_size_gige); | ||
2519 | DBG(dev, "rx_fifo_size : %d (%d gige)\n", dev->rx_fifo_size, dev->rx_fifo_size_gige); | ||
2520 | DBG(dev, "max_mtu : %d\n", dev->max_mtu); | ||
2521 | DBG(dev, "OPB freq : %d\n", dev->opb_bus_freq); | ||
2522 | |||
2523 | return 0; | ||
2524 | } | ||
2525 | |||
2526 | static int __devinit emac_probe(struct of_device *ofdev, | ||
2527 | const struct of_device_id *match) | ||
2528 | { | ||
2529 | struct net_device *ndev; | ||
2530 | struct emac_instance *dev; | ||
2531 | struct device_node *np = ofdev->node; | ||
2532 | struct device_node **blist = NULL; | ||
2533 | int err, i; | ||
2534 | |||
2535 | /* Find ourselves in the bootlist if we are there */ | ||
2536 | for (i = 0; i < EMAC_BOOT_LIST_SIZE; i++) | ||
2537 | if (emac_boot_list[i] == np) | ||
2538 | blist = &emac_boot_list[i]; | ||
2539 | |||
2540 | /* Allocate our net_device structure */ | ||
2541 | err = -ENOMEM; | ||
2542 | ndev = alloc_etherdev(sizeof(struct emac_instance)); | ||
2543 | if (!ndev) { | ||
2544 | printk(KERN_ERR "%s: could not allocate ethernet device!\n", | ||
2545 | np->full_name); | ||
2546 | goto err_gone; | ||
2547 | } | ||
2548 | dev = netdev_priv(ndev); | ||
2549 | dev->ndev = ndev; | ||
2550 | dev->ofdev = ofdev; | ||
2551 | dev->blist = blist; | ||
2552 | SET_MODULE_OWNER(ndev); | ||
2553 | SET_NETDEV_DEV(ndev, &ofdev->dev); | ||
2554 | |||
2555 | /* Initialize some embedded data structures */ | ||
2556 | mutex_init(&dev->mdio_lock); | ||
2557 | mutex_init(&dev->link_lock); | ||
2558 | spin_lock_init(&dev->lock); | ||
2559 | INIT_WORK(&dev->reset_work, emac_reset_work); | ||
2560 | |||
2561 | /* Init various config data based on device-tree */ | ||
2562 | err = emac_init_config(dev); | ||
2563 | if (err != 0) | ||
2564 | goto err_free; | ||
2565 | |||
2566 | /* Get interrupts. EMAC irq is mandatory, WOL irq is optional */ | ||
2567 | dev->emac_irq = irq_of_parse_and_map(np, 0); | ||
2568 | dev->wol_irq = irq_of_parse_and_map(np, 1); | ||
2569 | if (dev->emac_irq == NO_IRQ) { | ||
2570 | printk(KERN_ERR "%s: Can't map main interrupt\n", np->full_name); | ||
2571 | goto err_free; | ||
2572 | } | ||
2573 | ndev->irq = dev->emac_irq; | ||
2574 | |||
2575 | /* Map EMAC regs */ | ||
2576 | if (of_address_to_resource(np, 0, &dev->rsrc_regs)) { | ||
2577 | printk(KERN_ERR "%s: Can't get registers address\n", | ||
2578 | np->full_name); | ||
2579 | goto err_irq_unmap; | ||
2580 | } | ||
2581 | // TODO : request_mem_region | ||
2582 | dev->emacp = ioremap(dev->rsrc_regs.start, sizeof(struct emac_regs)); | ||
2583 | if (dev->emacp == NULL) { | ||
2584 | printk(KERN_ERR "%s: Can't map device registers!\n", | ||
2585 | np->full_name); | ||
2586 | err = -ENOMEM; | ||
2587 | goto err_irq_unmap; | ||
2588 | } | ||
2589 | |||
2590 | /* Wait for dependent devices */ | ||
2591 | err = emac_wait_deps(dev); | ||
2592 | if (err) { | ||
2593 | printk(KERN_ERR | ||
2594 | "%s: Timeout waiting for dependent devices\n", | ||
2595 | np->full_name); | ||
2596 | /* display more info about what's missing ? */ | ||
2597 | goto err_reg_unmap; | ||
2598 | } | ||
2599 | dev->mal = dev_get_drvdata(&dev->mal_dev->dev); | ||
2600 | if (dev->mdio_dev != NULL) | ||
2601 | dev->mdio_instance = dev_get_drvdata(&dev->mdio_dev->dev); | ||
2602 | |||
2603 | /* Register with MAL */ | ||
2604 | dev->commac.ops = &emac_commac_ops; | ||
2605 | dev->commac.dev = dev; | ||
2606 | dev->commac.tx_chan_mask = MAL_CHAN_MASK(dev->mal_tx_chan); | ||
2607 | dev->commac.rx_chan_mask = MAL_CHAN_MASK(dev->mal_rx_chan); | ||
2608 | err = mal_register_commac(dev->mal, &dev->commac); | ||
2609 | if (err) { | ||
2610 | printk(KERN_ERR "%s: failed to register with mal %s!\n", | ||
2611 | np->full_name, dev->mal_dev->node->full_name); | ||
2612 | goto err_rel_deps; | ||
2613 | } | ||
2614 | dev->rx_skb_size = emac_rx_skb_size(ndev->mtu); | ||
2615 | dev->rx_sync_size = emac_rx_sync_size(ndev->mtu); | ||
2616 | |||
2617 | /* Get pointers to BD rings */ | ||
2618 | dev->tx_desc = | ||
2619 | dev->mal->bd_virt + mal_tx_bd_offset(dev->mal, dev->mal_tx_chan); | ||
2620 | dev->rx_desc = | ||
2621 | dev->mal->bd_virt + mal_rx_bd_offset(dev->mal, dev->mal_rx_chan); | ||
2622 | |||
2623 | DBG(dev, "tx_desc %p" NL, dev->tx_desc); | ||
2624 | DBG(dev, "rx_desc %p" NL, dev->rx_desc); | ||
2625 | |||
2626 | /* Clean rings */ | ||
2627 | memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor)); | ||
2628 | memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor)); | ||
2629 | |||
2630 | /* Attach to ZMII, if needed */ | ||
2631 | if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII) && | ||
2632 | (err = zmii_attach(dev->zmii_dev, dev->zmii_port, &dev->phy_mode)) != 0) | ||
2633 | goto err_unreg_commac; | ||
2634 | |||
2635 | /* Attach to RGMII, if needed */ | ||
2636 | if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII) && | ||
2637 | (err = rgmii_attach(dev->rgmii_dev, dev->rgmii_port, dev->phy_mode)) != 0) | ||
2638 | goto err_detach_zmii; | ||
2639 | |||
2640 | /* Attach to TAH, if needed */ | ||
2641 | if (emac_has_feature(dev, EMAC_FTR_HAS_TAH) && | ||
2642 | (err = tah_attach(dev->tah_dev, dev->tah_port)) != 0) | ||
2643 | goto err_detach_rgmii; | ||
2644 | |||
2645 | /* Set some link defaults before we can find out real parameters */ | ||
2646 | dev->phy.speed = SPEED_100; | ||
2647 | dev->phy.duplex = DUPLEX_FULL; | ||
2648 | dev->phy.autoneg = AUTONEG_DISABLE; | ||
2649 | dev->phy.pause = dev->phy.asym_pause = 0; | ||
2650 | dev->stop_timeout = STOP_TIMEOUT_100; | ||
2651 | INIT_DELAYED_WORK(&dev->link_work, emac_link_timer); | ||
2652 | |||
2653 | /* Find PHY if any */ | ||
2654 | err = emac_init_phy(dev); | ||
2655 | if (err != 0) | ||
2656 | goto err_detach_tah; | ||
2657 | |||
2658 | /* Fill in the driver function table */ | ||
2659 | ndev->open = &emac_open; | ||
2660 | #ifdef CONFIG_IBM_NEW_EMAC_TAH | ||
2661 | if (dev->tah_dev) { | ||
2662 | ndev->hard_start_xmit = &emac_start_xmit_sg; | ||
2663 | ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; | ||
2664 | } else | ||
2665 | #endif | ||
2666 | ndev->hard_start_xmit = &emac_start_xmit; | ||
2667 | ndev->tx_timeout = &emac_tx_timeout; | ||
2668 | ndev->watchdog_timeo = 5 * HZ; | ||
2669 | ndev->stop = &emac_close; | ||
2670 | ndev->get_stats = &emac_stats; | ||
2671 | ndev->set_multicast_list = &emac_set_multicast_list; | ||
2672 | ndev->do_ioctl = &emac_ioctl; | ||
2673 | if (emac_phy_supports_gige(dev->phy_mode)) { | ||
2674 | ndev->change_mtu = &emac_change_mtu; | ||
2675 | dev->commac.ops = &emac_commac_sg_ops; | ||
2676 | } | ||
2677 | SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops); | ||
2678 | |||
2679 | netif_carrier_off(ndev); | ||
2680 | netif_stop_queue(ndev); | ||
2681 | |||
2682 | err = register_netdev(ndev); | ||
2683 | if (err) { | ||
2684 | printk(KERN_ERR "%s: failed to register net device (%d)!\n", | ||
2685 | np->full_name, err); | ||
2686 | goto err_detach_tah; | ||
2687 | } | ||
2688 | |||
2689 | /* Set our drvdata last as we don't want them visible until we are | ||
2690 | * fully initialized | ||
2691 | */ | ||
2692 | wmb(); | ||
2693 | dev_set_drvdata(&ofdev->dev, dev); | ||
2694 | |||
2695 | /* There's a new kid in town ! Let's tell everybody */ | ||
2696 | wake_up_all(&emac_probe_wait); | ||
2697 | |||
2698 | |||
2699 | printk(KERN_INFO | ||
2700 | "%s: EMAC-%d %s, MAC %02x:%02x:%02x:%02x:%02x:%02x\n", | ||
2701 | ndev->name, dev->cell_index, np->full_name, | ||
2702 | ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2], | ||
2703 | ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]); | ||
2704 | |||
2705 | if (dev->phy.address >= 0) | ||
2706 | printk("%s: found %s PHY (0x%02x)\n", ndev->name, | ||
2707 | dev->phy.def->name, dev->phy.address); | ||
2708 | |||
2709 | emac_dbg_register(dev); | ||
2710 | |||
2711 | /* Life is good */ | ||
2712 | return 0; | ||
2713 | |||
2714 | /* I have a bad feeling about this ... */ | ||
2715 | |||
2716 | err_detach_tah: | ||
2717 | if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) | ||
2718 | tah_detach(dev->tah_dev, dev->tah_port); | ||
2719 | err_detach_rgmii: | ||
2720 | if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) | ||
2721 | rgmii_detach(dev->rgmii_dev, dev->rgmii_port); | ||
2722 | err_detach_zmii: | ||
2723 | if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) | ||
2724 | zmii_detach(dev->zmii_dev, dev->zmii_port); | ||
2725 | err_unreg_commac: | ||
2726 | mal_unregister_commac(dev->mal, &dev->commac); | ||
2727 | err_rel_deps: | ||
2728 | emac_put_deps(dev); | ||
2729 | err_reg_unmap: | ||
2730 | iounmap(dev->emacp); | ||
2731 | err_irq_unmap: | ||
2732 | if (dev->wol_irq != NO_IRQ) | ||
2733 | irq_dispose_mapping(dev->wol_irq); | ||
2734 | if (dev->emac_irq != NO_IRQ) | ||
2735 | irq_dispose_mapping(dev->emac_irq); | ||
2736 | err_free: | ||
2737 | kfree(ndev); | ||
2738 | err_gone: | ||
2739 | /* if we were on the bootlist, remove us as we won't show up and | ||
2740 | * wake up all waiters to notify them in case they were waiting | ||
2741 | * on us | ||
2742 | */ | ||
2743 | if (blist) { | ||
2744 | *blist = NULL; | ||
2745 | wake_up_all(&emac_probe_wait); | ||
2746 | } | ||
2747 | return err; | ||
2748 | } | ||
2749 | |||
2750 | static int __devexit emac_remove(struct of_device *ofdev) | ||
2751 | { | ||
2752 | struct emac_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
2753 | |||
2754 | DBG(dev, "remove" NL); | ||
2755 | |||
2756 | dev_set_drvdata(&ofdev->dev, NULL); | ||
2757 | |||
2758 | unregister_netdev(dev->ndev); | ||
2759 | |||
2760 | if (emac_has_feature(dev, EMAC_FTR_HAS_TAH)) | ||
2761 | tah_detach(dev->tah_dev, dev->tah_port); | ||
2762 | if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) | ||
2763 | rgmii_detach(dev->rgmii_dev, dev->rgmii_port); | ||
2764 | if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII)) | ||
2765 | zmii_detach(dev->zmii_dev, dev->zmii_port); | ||
2766 | |||
2767 | mal_unregister_commac(dev->mal, &dev->commac); | ||
2768 | emac_put_deps(dev); | ||
2769 | |||
2770 | emac_dbg_unregister(dev); | ||
2771 | iounmap(dev->emacp); | ||
2772 | |||
2773 | if (dev->wol_irq != NO_IRQ) | ||
2774 | irq_dispose_mapping(dev->wol_irq); | ||
2775 | if (dev->emac_irq != NO_IRQ) | ||
2776 | irq_dispose_mapping(dev->emac_irq); | ||
2777 | |||
2778 | kfree(dev->ndev); | ||
2779 | |||
2780 | return 0; | ||
2781 | } | ||
2782 | |||
2783 | /* XXX Features in here should be replaced by properties... */ | ||
2784 | static struct of_device_id emac_match[] = | ||
2785 | { | ||
2786 | { | ||
2787 | .type = "network", | ||
2788 | .compatible = "ibm,emac", | ||
2789 | }, | ||
2790 | { | ||
2791 | .type = "network", | ||
2792 | .compatible = "ibm,emac4", | ||
2793 | }, | ||
2794 | {}, | ||
2795 | }; | ||
2796 | |||
2797 | static struct of_platform_driver emac_driver = { | ||
2798 | .name = "emac", | ||
2799 | .match_table = emac_match, | ||
2800 | |||
2801 | .probe = emac_probe, | ||
2802 | .remove = emac_remove, | ||
2803 | }; | ||
2804 | |||
2805 | static void __init emac_make_bootlist(void) | ||
2806 | { | ||
2807 | struct device_node *np = NULL; | ||
2808 | int j, max, i = 0, k; | ||
2809 | int cell_indices[EMAC_BOOT_LIST_SIZE]; | ||
2810 | |||
2811 | /* Collect EMACs */ | ||
2812 | while((np = of_find_all_nodes(np)) != NULL) { | ||
2813 | const u32 *idx; | ||
2814 | |||
2815 | if (of_match_node(emac_match, np) == NULL) | ||
2816 | continue; | ||
2817 | if (of_get_property(np, "unused", NULL)) | ||
2818 | continue; | ||
2819 | idx = of_get_property(np, "cell-index", NULL); | ||
2820 | if (idx == NULL) | ||
2821 | continue; | ||
2822 | cell_indices[i] = *idx; | ||
2823 | emac_boot_list[i++] = of_node_get(np); | ||
2824 | if (i >= EMAC_BOOT_LIST_SIZE) { | ||
2825 | of_node_put(np); | ||
2826 | break; | ||
2827 | } | ||
2828 | } | ||
2829 | max = i; | ||
2830 | |||
2831 | /* Bubble sort them (doh, what a creative algorithm :-) */ | ||
2832 | for (i = 0; max > 1 && (i < (max - 1)); i++) | ||
2833 | for (j = i; j < max; j++) { | ||
2834 | if (cell_indices[i] > cell_indices[j]) { | ||
2835 | np = emac_boot_list[i]; | ||
2836 | emac_boot_list[i] = emac_boot_list[j]; | ||
2837 | emac_boot_list[j] = np; | ||
2838 | k = cell_indices[i]; | ||
2839 | cell_indices[i] = cell_indices[j]; | ||
2840 | cell_indices[j] = k; | ||
2841 | } | ||
2842 | } | ||
2843 | } | ||
2844 | |||
2845 | static int __init emac_init(void) | ||
2846 | { | ||
2847 | int rc; | ||
2848 | |||
2849 | printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n"); | ||
2850 | |||
2851 | /* Init debug stuff */ | ||
2852 | emac_init_debug(); | ||
2853 | |||
2854 | /* Build EMAC boot list */ | ||
2855 | emac_make_bootlist(); | ||
2856 | |||
2857 | /* Init submodules */ | ||
2858 | rc = mal_init(); | ||
2859 | if (rc) | ||
2860 | goto err; | ||
2861 | rc = zmii_init(); | ||
2862 | if (rc) | ||
2863 | goto err_mal; | ||
2864 | rc = rgmii_init(); | ||
2865 | if (rc) | ||
2866 | goto err_zmii; | ||
2867 | rc = tah_init(); | ||
2868 | if (rc) | ||
2869 | goto err_rgmii; | ||
2870 | rc = of_register_platform_driver(&emac_driver); | ||
2871 | if (rc) | ||
2872 | goto err_tah; | ||
2873 | |||
2874 | return 0; | ||
2875 | |||
2876 | err_tah: | ||
2877 | tah_exit(); | ||
2878 | err_rgmii: | ||
2879 | rgmii_exit(); | ||
2880 | err_zmii: | ||
2881 | zmii_exit(); | ||
2882 | err_mal: | ||
2883 | mal_exit(); | ||
2884 | err: | ||
2885 | return rc; | ||
2886 | } | ||
2887 | |||
2888 | static void __exit emac_exit(void) | ||
2889 | { | ||
2890 | int i; | ||
2891 | |||
2892 | of_unregister_platform_driver(&emac_driver); | ||
2893 | |||
2894 | tah_exit(); | ||
2895 | rgmii_exit(); | ||
2896 | zmii_exit(); | ||
2897 | mal_exit(); | ||
2898 | emac_fini_debug(); | ||
2899 | |||
2900 | /* Destroy EMAC boot list */ | ||
2901 | for (i = 0; i < EMAC_BOOT_LIST_SIZE; i++) | ||
2902 | if (emac_boot_list[i]) | ||
2903 | of_node_put(emac_boot_list[i]); | ||
2904 | } | ||
2905 | |||
2906 | module_init(emac_init); | ||
2907 | module_exit(emac_exit); | ||
diff --git a/drivers/net/ibm_newemac/core.h b/drivers/net/ibm_newemac/core.h new file mode 100644 index 000000000000..4011803117ca --- /dev/null +++ b/drivers/net/ibm_newemac/core.h | |||
@@ -0,0 +1,355 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_newemac/core.h | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller. | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Armin Kuster <akuster@mvista.com> | ||
11 | * Johnnie Peters <jpeters@mvista.com> | ||
12 | * Copyright 2000, 2001 MontaVista Softare Inc. | ||
13 | * | ||
14 | * This program is free software; you can redistribute it and/or modify it | ||
15 | * under the terms of the GNU General Public License as published by the | ||
16 | * Free Software Foundation; either version 2 of the License, or (at your | ||
17 | * option) any later version. | ||
18 | * | ||
19 | */ | ||
20 | #ifndef __IBM_NEWEMAC_CORE_H | ||
21 | #define __IBM_NEWEMAC_CORE_H | ||
22 | |||
23 | #include <linux/module.h> | ||
24 | #include <linux/init.h> | ||
25 | #include <linux/list.h> | ||
26 | #include <linux/kernel.h> | ||
27 | #include <linux/interrupt.h> | ||
28 | #include <linux/netdevice.h> | ||
29 | #include <linux/dma-mapping.h> | ||
30 | #include <linux/spinlock.h> | ||
31 | |||
32 | #include <asm/of_platform.h> | ||
33 | #include <asm/io.h> | ||
34 | #include <asm/dcr.h> | ||
35 | |||
36 | #include "emac.h" | ||
37 | #include "phy.h" | ||
38 | #include "zmii.h" | ||
39 | #include "rgmii.h" | ||
40 | #include "mal.h" | ||
41 | #include "tah.h" | ||
42 | #include "debug.h" | ||
43 | |||
44 | #define NUM_TX_BUFF CONFIG_IBM_NEW_EMAC_TXB | ||
45 | #define NUM_RX_BUFF CONFIG_IBM_NEW_EMAC_RXB | ||
46 | |||
47 | /* Simple sanity check */ | ||
48 | #if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256 | ||
49 | #error Invalid number of buffer descriptors (greater than 256) | ||
50 | #endif | ||
51 | |||
52 | #define EMAC_MIN_MTU 46 | ||
53 | |||
54 | /* Maximum L2 header length (VLAN tagged, no FCS) */ | ||
55 | #define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4) | ||
56 | |||
57 | /* RX BD size for the given MTU */ | ||
58 | static inline int emac_rx_size(int mtu) | ||
59 | { | ||
60 | if (mtu > ETH_DATA_LEN) | ||
61 | return MAL_MAX_RX_SIZE; | ||
62 | else | ||
63 | return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD); | ||
64 | } | ||
65 | |||
66 | #define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment()) | ||
67 | |||
68 | #define EMAC_RX_SKB_HEADROOM \ | ||
69 | EMAC_DMA_ALIGN(CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM) | ||
70 | |||
71 | /* Size of RX skb for the given MTU */ | ||
72 | static inline int emac_rx_skb_size(int mtu) | ||
73 | { | ||
74 | int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu)); | ||
75 | return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM; | ||
76 | } | ||
77 | |||
78 | /* RX DMA sync size */ | ||
79 | static inline int emac_rx_sync_size(int mtu) | ||
80 | { | ||
81 | return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2); | ||
82 | } | ||
83 | |||
84 | /* Driver statistcs is split into two parts to make it more cache friendly: | ||
85 | * - normal statistics (packet count, etc) | ||
86 | * - error statistics | ||
87 | * | ||
88 | * When statistics is requested by ethtool, these parts are concatenated, | ||
89 | * normal one goes first. | ||
90 | * | ||
91 | * Please, keep these structures in sync with emac_stats_keys. | ||
92 | */ | ||
93 | |||
94 | /* Normal TX/RX Statistics */ | ||
95 | struct emac_stats { | ||
96 | u64 rx_packets; | ||
97 | u64 rx_bytes; | ||
98 | u64 tx_packets; | ||
99 | u64 tx_bytes; | ||
100 | u64 rx_packets_csum; | ||
101 | u64 tx_packets_csum; | ||
102 | }; | ||
103 | |||
104 | /* Error statistics */ | ||
105 | struct emac_error_stats { | ||
106 | u64 tx_undo; | ||
107 | |||
108 | /* Software RX Errors */ | ||
109 | u64 rx_dropped_stack; | ||
110 | u64 rx_dropped_oom; | ||
111 | u64 rx_dropped_error; | ||
112 | u64 rx_dropped_resize; | ||
113 | u64 rx_dropped_mtu; | ||
114 | u64 rx_stopped; | ||
115 | /* BD reported RX errors */ | ||
116 | u64 rx_bd_errors; | ||
117 | u64 rx_bd_overrun; | ||
118 | u64 rx_bd_bad_packet; | ||
119 | u64 rx_bd_runt_packet; | ||
120 | u64 rx_bd_short_event; | ||
121 | u64 rx_bd_alignment_error; | ||
122 | u64 rx_bd_bad_fcs; | ||
123 | u64 rx_bd_packet_too_long; | ||
124 | u64 rx_bd_out_of_range; | ||
125 | u64 rx_bd_in_range; | ||
126 | /* EMAC IRQ reported RX errors */ | ||
127 | u64 rx_parity; | ||
128 | u64 rx_fifo_overrun; | ||
129 | u64 rx_overrun; | ||
130 | u64 rx_bad_packet; | ||
131 | u64 rx_runt_packet; | ||
132 | u64 rx_short_event; | ||
133 | u64 rx_alignment_error; | ||
134 | u64 rx_bad_fcs; | ||
135 | u64 rx_packet_too_long; | ||
136 | u64 rx_out_of_range; | ||
137 | u64 rx_in_range; | ||
138 | |||
139 | /* Software TX Errors */ | ||
140 | u64 tx_dropped; | ||
141 | /* BD reported TX errors */ | ||
142 | u64 tx_bd_errors; | ||
143 | u64 tx_bd_bad_fcs; | ||
144 | u64 tx_bd_carrier_loss; | ||
145 | u64 tx_bd_excessive_deferral; | ||
146 | u64 tx_bd_excessive_collisions; | ||
147 | u64 tx_bd_late_collision; | ||
148 | u64 tx_bd_multple_collisions; | ||
149 | u64 tx_bd_single_collision; | ||
150 | u64 tx_bd_underrun; | ||
151 | u64 tx_bd_sqe; | ||
152 | /* EMAC IRQ reported TX errors */ | ||
153 | u64 tx_parity; | ||
154 | u64 tx_underrun; | ||
155 | u64 tx_sqe; | ||
156 | u64 tx_errors; | ||
157 | }; | ||
158 | |||
159 | #define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct emac_stats) + \ | ||
160 | sizeof(struct emac_error_stats)) \ | ||
161 | / sizeof(u64)) | ||
162 | |||
163 | struct emac_instance { | ||
164 | struct net_device *ndev; | ||
165 | struct resource rsrc_regs; | ||
166 | struct emac_regs __iomem *emacp; | ||
167 | struct of_device *ofdev; | ||
168 | struct device_node **blist; /* bootlist entry */ | ||
169 | |||
170 | /* MAL linkage */ | ||
171 | u32 mal_ph; | ||
172 | struct of_device *mal_dev; | ||
173 | u32 mal_rx_chan; | ||
174 | u32 mal_tx_chan; | ||
175 | struct mal_instance *mal; | ||
176 | struct mal_commac commac; | ||
177 | |||
178 | /* PHY infos */ | ||
179 | u32 phy_mode; | ||
180 | u32 phy_map; | ||
181 | u32 phy_address; | ||
182 | u32 phy_feat_exc; | ||
183 | struct mii_phy phy; | ||
184 | struct mutex link_lock; | ||
185 | struct delayed_work link_work; | ||
186 | int link_polling; | ||
187 | |||
188 | /* Shared MDIO if any */ | ||
189 | u32 mdio_ph; | ||
190 | struct of_device *mdio_dev; | ||
191 | struct emac_instance *mdio_instance; | ||
192 | struct mutex mdio_lock; | ||
193 | |||
194 | /* ZMII infos if any */ | ||
195 | u32 zmii_ph; | ||
196 | u32 zmii_port; | ||
197 | struct of_device *zmii_dev; | ||
198 | |||
199 | /* RGMII infos if any */ | ||
200 | u32 rgmii_ph; | ||
201 | u32 rgmii_port; | ||
202 | struct of_device *rgmii_dev; | ||
203 | |||
204 | /* TAH infos if any */ | ||
205 | u32 tah_ph; | ||
206 | u32 tah_port; | ||
207 | struct of_device *tah_dev; | ||
208 | |||
209 | /* IRQs */ | ||
210 | int wol_irq; | ||
211 | int emac_irq; | ||
212 | |||
213 | /* OPB bus frequency in Mhz */ | ||
214 | u32 opb_bus_freq; | ||
215 | |||
216 | /* Cell index within an ASIC (for clk mgmnt) */ | ||
217 | u32 cell_index; | ||
218 | |||
219 | /* Max supported MTU */ | ||
220 | u32 max_mtu; | ||
221 | |||
222 | /* Feature bits (from probe table) */ | ||
223 | unsigned int features; | ||
224 | |||
225 | /* Tx and Rx fifo sizes & other infos in bytes */ | ||
226 | u32 tx_fifo_size; | ||
227 | u32 tx_fifo_size_gige; | ||
228 | u32 rx_fifo_size; | ||
229 | u32 rx_fifo_size_gige; | ||
230 | u32 fifo_entry_size; | ||
231 | u32 mal_burst_size; /* move to MAL ? */ | ||
232 | |||
233 | /* Descriptor management | ||
234 | */ | ||
235 | struct mal_descriptor *tx_desc; | ||
236 | int tx_cnt; | ||
237 | int tx_slot; | ||
238 | int ack_slot; | ||
239 | |||
240 | struct mal_descriptor *rx_desc; | ||
241 | int rx_slot; | ||
242 | struct sk_buff *rx_sg_skb; /* 1 */ | ||
243 | int rx_skb_size; | ||
244 | int rx_sync_size; | ||
245 | |||
246 | struct sk_buff *tx_skb[NUM_TX_BUFF]; | ||
247 | struct sk_buff *rx_skb[NUM_RX_BUFF]; | ||
248 | |||
249 | /* Stats | ||
250 | */ | ||
251 | struct emac_error_stats estats; | ||
252 | struct net_device_stats nstats; | ||
253 | struct emac_stats stats; | ||
254 | |||
255 | /* Misc | ||
256 | */ | ||
257 | int reset_failed; | ||
258 | int stop_timeout; /* in us */ | ||
259 | int no_mcast; | ||
260 | int mcast_pending; | ||
261 | struct work_struct reset_work; | ||
262 | spinlock_t lock; | ||
263 | }; | ||
264 | |||
265 | /* | ||
266 | * Features of various EMAC implementations | ||
267 | */ | ||
268 | |||
269 | /* | ||
270 | * No flow control on 40x according to the original driver | ||
271 | */ | ||
272 | #define EMAC_FTR_NO_FLOW_CONTROL_40x 0x00000001 | ||
273 | /* | ||
274 | * Cell is an EMAC4 | ||
275 | */ | ||
276 | #define EMAC_FTR_EMAC4 0x00000002 | ||
277 | /* | ||
278 | * For the 440SPe, AMCC inexplicably changed the polarity of | ||
279 | * the "operation complete" bit in the MII control register. | ||
280 | */ | ||
281 | #define EMAC_FTR_STACR_OC_INVERT 0x00000004 | ||
282 | /* | ||
283 | * Set if we have a TAH. | ||
284 | */ | ||
285 | #define EMAC_FTR_HAS_TAH 0x00000008 | ||
286 | /* | ||
287 | * Set if we have a ZMII. | ||
288 | */ | ||
289 | #define EMAC_FTR_HAS_ZMII 0x00000010 | ||
290 | /* | ||
291 | * Set if we have a RGMII. | ||
292 | */ | ||
293 | #define EMAC_FTR_HAS_RGMII 0x00000020 | ||
294 | /* | ||
295 | * Set if we have axon-type STACR | ||
296 | */ | ||
297 | #define EMAC_FTR_HAS_AXON_STACR 0x00000040 | ||
298 | |||
299 | |||
300 | /* Right now, we don't quite handle the always/possible masks on the | ||
301 | * most optimal way as we don't have a way to say something like | ||
302 | * always EMAC4. Patches welcome. | ||
303 | */ | ||
304 | enum { | ||
305 | EMAC_FTRS_ALWAYS = 0, | ||
306 | |||
307 | EMAC_FTRS_POSSIBLE = | ||
308 | #ifdef CONFIG_IBM_NEW_EMAC_EMAC4 | ||
309 | EMAC_FTR_EMAC4 | EMAC_FTR_HAS_AXON_STACR | | ||
310 | EMAC_FTR_STACR_OC_INVERT | | ||
311 | #endif | ||
312 | #ifdef CONFIG_IBM_NEW_EMAC_TAH | ||
313 | EMAC_FTR_HAS_TAH | | ||
314 | #endif | ||
315 | #ifdef CONFIG_IBM_NEW_EMAC_ZMII | ||
316 | EMAC_FTR_HAS_ZMII | | ||
317 | #endif | ||
318 | #ifdef CONFIG_IBM_NEW_EMAC_RGMII | ||
319 | EMAC_FTR_HAS_RGMII | | ||
320 | #endif | ||
321 | 0, | ||
322 | }; | ||
323 | |||
324 | static inline int emac_has_feature(struct emac_instance *dev, | ||
325 | unsigned long feature) | ||
326 | { | ||
327 | return (EMAC_FTRS_ALWAYS & feature) || | ||
328 | (EMAC_FTRS_POSSIBLE & dev->features & feature); | ||
329 | } | ||
330 | |||
331 | |||
332 | /* Ethtool get_regs complex data. | ||
333 | * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH | ||
334 | * when available. | ||
335 | * | ||
336 | * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr, | ||
337 | * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers. | ||
338 | * Each register component is preceded with emac_ethtool_regs_subhdr. | ||
339 | * Order of the optional headers follows their relative bit posititions | ||
340 | * in emac_ethtool_regs_hdr.components | ||
341 | */ | ||
342 | #define EMAC_ETHTOOL_REGS_ZMII 0x00000001 | ||
343 | #define EMAC_ETHTOOL_REGS_RGMII 0x00000002 | ||
344 | #define EMAC_ETHTOOL_REGS_TAH 0x00000004 | ||
345 | |||
346 | struct emac_ethtool_regs_hdr { | ||
347 | u32 components; | ||
348 | }; | ||
349 | |||
350 | struct emac_ethtool_regs_subhdr { | ||
351 | u32 version; | ||
352 | u32 index; | ||
353 | }; | ||
354 | |||
355 | #endif /* __IBM_NEWEMAC_CORE_H */ | ||
diff --git a/drivers/net/ibm_newemac/debug.c b/drivers/net/ibm_newemac/debug.c new file mode 100644 index 000000000000..170524ee0f19 --- /dev/null +++ b/drivers/net/ibm_newemac/debug.c | |||
@@ -0,0 +1,238 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_newemac/debug.c | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines. | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify it | ||
10 | * under the terms of the GNU General Public License as published by the | ||
11 | * Free Software Foundation; either version 2 of the License, or (at your | ||
12 | * option) any later version. | ||
13 | * | ||
14 | */ | ||
15 | #include <linux/init.h> | ||
16 | #include <linux/module.h> | ||
17 | #include <linux/kernel.h> | ||
18 | #include <linux/netdevice.h> | ||
19 | #include <linux/sysrq.h> | ||
20 | #include <asm/io.h> | ||
21 | |||
22 | #include "core.h" | ||
23 | |||
24 | static spinlock_t emac_dbg_lock = SPIN_LOCK_UNLOCKED; | ||
25 | |||
26 | static void emac_desc_dump(struct emac_instance *p) | ||
27 | { | ||
28 | int i; | ||
29 | printk("** EMAC %s TX BDs **\n" | ||
30 | " tx_cnt = %d tx_slot = %d ack_slot = %d\n", | ||
31 | p->ofdev->node->full_name, | ||
32 | p->tx_cnt, p->tx_slot, p->ack_slot); | ||
33 | for (i = 0; i < NUM_TX_BUFF / 2; ++i) | ||
34 | printk | ||
35 | ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n", | ||
36 | i, p->tx_desc[i].data_ptr, p->tx_skb[i] ? 'V' : ' ', | ||
37 | p->tx_desc[i].ctrl, p->tx_desc[i].data_len, | ||
38 | NUM_TX_BUFF / 2 + i, | ||
39 | p->tx_desc[NUM_TX_BUFF / 2 + i].data_ptr, | ||
40 | p->tx_skb[NUM_TX_BUFF / 2 + i] ? 'V' : ' ', | ||
41 | p->tx_desc[NUM_TX_BUFF / 2 + i].ctrl, | ||
42 | p->tx_desc[NUM_TX_BUFF / 2 + i].data_len); | ||
43 | |||
44 | printk("** EMAC %s RX BDs **\n" | ||
45 | " rx_slot = %d flags = 0x%lx rx_skb_size = %d rx_sync_size = %d\n" | ||
46 | " rx_sg_skb = 0x%p\n", | ||
47 | p->ofdev->node->full_name, | ||
48 | p->rx_slot, p->commac.flags, p->rx_skb_size, | ||
49 | p->rx_sync_size, p->rx_sg_skb); | ||
50 | for (i = 0; i < NUM_RX_BUFF / 2; ++i) | ||
51 | printk | ||
52 | ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n", | ||
53 | i, p->rx_desc[i].data_ptr, p->rx_skb[i] ? 'V' : ' ', | ||
54 | p->rx_desc[i].ctrl, p->rx_desc[i].data_len, | ||
55 | NUM_RX_BUFF / 2 + i, | ||
56 | p->rx_desc[NUM_RX_BUFF / 2 + i].data_ptr, | ||
57 | p->rx_skb[NUM_RX_BUFF / 2 + i] ? 'V' : ' ', | ||
58 | p->rx_desc[NUM_RX_BUFF / 2 + i].ctrl, | ||
59 | p->rx_desc[NUM_RX_BUFF / 2 + i].data_len); | ||
60 | } | ||
61 | |||
62 | static void emac_mac_dump(struct emac_instance *dev) | ||
63 | { | ||
64 | struct emac_regs __iomem *p = dev->emacp; | ||
65 | |||
66 | printk("** EMAC %s registers **\n" | ||
67 | "MR0 = 0x%08x MR1 = 0x%08x TMR0 = 0x%08x TMR1 = 0x%08x\n" | ||
68 | "RMR = 0x%08x ISR = 0x%08x ISER = 0x%08x\n" | ||
69 | "IAR = %04x%08x VTPID = 0x%04x VTCI = 0x%04x\n" | ||
70 | "IAHT: 0x%04x 0x%04x 0x%04x 0x%04x " | ||
71 | "GAHT: 0x%04x 0x%04x 0x%04x 0x%04x\n" | ||
72 | "LSA = %04x%08x IPGVR = 0x%04x\n" | ||
73 | "STACR = 0x%08x TRTR = 0x%08x RWMR = 0x%08x\n" | ||
74 | "OCTX = 0x%08x OCRX = 0x%08x IPCR = 0x%08x\n", | ||
75 | dev->ofdev->node->full_name, in_be32(&p->mr0), in_be32(&p->mr1), | ||
76 | in_be32(&p->tmr0), in_be32(&p->tmr1), | ||
77 | in_be32(&p->rmr), in_be32(&p->isr), in_be32(&p->iser), | ||
78 | in_be32(&p->iahr), in_be32(&p->ialr), in_be32(&p->vtpid), | ||
79 | in_be32(&p->vtci), | ||
80 | in_be32(&p->iaht1), in_be32(&p->iaht2), in_be32(&p->iaht3), | ||
81 | in_be32(&p->iaht4), | ||
82 | in_be32(&p->gaht1), in_be32(&p->gaht2), in_be32(&p->gaht3), | ||
83 | in_be32(&p->gaht4), | ||
84 | in_be32(&p->lsah), in_be32(&p->lsal), in_be32(&p->ipgvr), | ||
85 | in_be32(&p->stacr), in_be32(&p->trtr), in_be32(&p->rwmr), | ||
86 | in_be32(&p->octx), in_be32(&p->ocrx), in_be32(&p->ipcr) | ||
87 | ); | ||
88 | |||
89 | emac_desc_dump(dev); | ||
90 | } | ||
91 | |||
92 | static void emac_mal_dump(struct mal_instance *mal) | ||
93 | { | ||
94 | int i; | ||
95 | |||
96 | printk("** MAL %s Registers **\n" | ||
97 | "CFG = 0x%08x ESR = 0x%08x IER = 0x%08x\n" | ||
98 | "TX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n" | ||
99 | "RX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n", | ||
100 | mal->ofdev->node->full_name, | ||
101 | get_mal_dcrn(mal, MAL_CFG), get_mal_dcrn(mal, MAL_ESR), | ||
102 | get_mal_dcrn(mal, MAL_IER), | ||
103 | get_mal_dcrn(mal, MAL_TXCASR), get_mal_dcrn(mal, MAL_TXCARR), | ||
104 | get_mal_dcrn(mal, MAL_TXEOBISR), get_mal_dcrn(mal, MAL_TXDEIR), | ||
105 | get_mal_dcrn(mal, MAL_RXCASR), get_mal_dcrn(mal, MAL_RXCARR), | ||
106 | get_mal_dcrn(mal, MAL_RXEOBISR), get_mal_dcrn(mal, MAL_RXDEIR) | ||
107 | ); | ||
108 | |||
109 | printk("TX|"); | ||
110 | for (i = 0; i < mal->num_tx_chans; ++i) { | ||
111 | if (i && !(i % 4)) | ||
112 | printk("\n "); | ||
113 | printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_TXCTPR(i))); | ||
114 | } | ||
115 | printk("\nRX|"); | ||
116 | for (i = 0; i < mal->num_rx_chans; ++i) { | ||
117 | if (i && !(i % 4)) | ||
118 | printk("\n "); | ||
119 | printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_RXCTPR(i))); | ||
120 | } | ||
121 | printk("\n "); | ||
122 | for (i = 0; i < mal->num_rx_chans; ++i) { | ||
123 | u32 r = get_mal_dcrn(mal, MAL_RCBS(i)); | ||
124 | if (i && !(i % 3)) | ||
125 | printk("\n "); | ||
126 | printk("RCBS%d = 0x%08x (%d) ", i, r, r * 16); | ||
127 | } | ||
128 | printk("\n"); | ||
129 | } | ||
130 | |||
131 | static struct emac_instance *__emacs[4]; | ||
132 | static struct mal_instance *__mals[1]; | ||
133 | |||
134 | void emac_dbg_register(struct emac_instance *dev) | ||
135 | { | ||
136 | unsigned long flags; | ||
137 | int i; | ||
138 | |||
139 | spin_lock_irqsave(&emac_dbg_lock, flags); | ||
140 | for (i = 0; i < ARRAY_SIZE(__emacs); i++) | ||
141 | if (__emacs[i] == NULL) { | ||
142 | __emacs[i] = dev; | ||
143 | break; | ||
144 | } | ||
145 | spin_unlock_irqrestore(&emac_dbg_lock, flags); | ||
146 | } | ||
147 | |||
148 | void emac_dbg_unregister(struct emac_instance *dev) | ||
149 | { | ||
150 | unsigned long flags; | ||
151 | int i; | ||
152 | |||
153 | spin_lock_irqsave(&emac_dbg_lock, flags); | ||
154 | for (i = 0; i < ARRAY_SIZE(__emacs); i++) | ||
155 | if (__emacs[i] == dev) { | ||
156 | __emacs[i] = NULL; | ||
157 | break; | ||
158 | } | ||
159 | spin_unlock_irqrestore(&emac_dbg_lock, flags); | ||
160 | } | ||
161 | |||
162 | void mal_dbg_register(struct mal_instance *mal) | ||
163 | { | ||
164 | unsigned long flags; | ||
165 | int i; | ||
166 | |||
167 | spin_lock_irqsave(&emac_dbg_lock, flags); | ||
168 | for (i = 0; i < ARRAY_SIZE(__mals); i++) | ||
169 | if (__mals[i] == NULL) { | ||
170 | __mals[i] = mal; | ||
171 | break; | ||
172 | } | ||
173 | spin_unlock_irqrestore(&emac_dbg_lock, flags); | ||
174 | } | ||
175 | |||
176 | void mal_dbg_unregister(struct mal_instance *mal) | ||
177 | { | ||
178 | unsigned long flags; | ||
179 | int i; | ||
180 | |||
181 | spin_lock_irqsave(&emac_dbg_lock, flags); | ||
182 | for (i = 0; i < ARRAY_SIZE(__mals); i++) | ||
183 | if (__mals[i] == mal) { | ||
184 | __mals[i] = NULL; | ||
185 | break; | ||
186 | } | ||
187 | spin_unlock_irqrestore(&emac_dbg_lock, flags); | ||
188 | } | ||
189 | |||
190 | void emac_dbg_dump_all(void) | ||
191 | { | ||
192 | unsigned int i; | ||
193 | unsigned long flags; | ||
194 | |||
195 | spin_lock_irqsave(&emac_dbg_lock, flags); | ||
196 | |||
197 | for (i = 0; i < ARRAY_SIZE(__mals); ++i) | ||
198 | if (__mals[i]) | ||
199 | emac_mal_dump(__mals[i]); | ||
200 | |||
201 | for (i = 0; i < ARRAY_SIZE(__emacs); ++i) | ||
202 | if (__emacs[i]) | ||
203 | emac_mac_dump(__emacs[i]); | ||
204 | |||
205 | spin_unlock_irqrestore(&emac_dbg_lock, flags); | ||
206 | } | ||
207 | |||
208 | #if defined(CONFIG_MAGIC_SYSRQ) | ||
209 | static void emac_sysrq_handler(int key, struct tty_struct *tty) | ||
210 | { | ||
211 | emac_dbg_dump_all(); | ||
212 | } | ||
213 | |||
214 | static struct sysrq_key_op emac_sysrq_op = { | ||
215 | .handler = emac_sysrq_handler, | ||
216 | .help_msg = "emaC", | ||
217 | .action_msg = "Show EMAC(s) status", | ||
218 | }; | ||
219 | |||
220 | int __init emac_init_debug(void) | ||
221 | { | ||
222 | return register_sysrq_key('c', &emac_sysrq_op); | ||
223 | } | ||
224 | |||
225 | void __exit emac_fini_debug(void) | ||
226 | { | ||
227 | unregister_sysrq_key('c', &emac_sysrq_op); | ||
228 | } | ||
229 | |||
230 | #else | ||
231 | int __init emac_init_debug(void) | ||
232 | { | ||
233 | return 0; | ||
234 | } | ||
235 | void __exit emac_fini_debug(void) | ||
236 | { | ||
237 | } | ||
238 | #endif /* CONFIG_MAGIC_SYSRQ */ | ||
diff --git a/drivers/net/ibm_newemac/debug.h b/drivers/net/ibm_newemac/debug.h new file mode 100644 index 000000000000..1dd2dcbc157f --- /dev/null +++ b/drivers/net/ibm_newemac/debug.h | |||
@@ -0,0 +1,78 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_newemac/debug.h | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines. | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify it | ||
10 | * under the terms of the GNU General Public License as published by the | ||
11 | * Free Software Foundation; either version 2 of the License, or (at your | ||
12 | * option) any later version. | ||
13 | * | ||
14 | */ | ||
15 | #ifndef __IBM_NEWEMAC_DEBUG_H | ||
16 | #define __IBM_NEWEMAC_DEBUG_H | ||
17 | |||
18 | #include <linux/init.h> | ||
19 | |||
20 | #include "core.h" | ||
21 | |||
22 | #if defined(CONFIG_IBM_NEW_EMAC_DEBUG) | ||
23 | |||
24 | struct emac_instance; | ||
25 | struct mal_instance; | ||
26 | |||
27 | extern void emac_dbg_register(struct emac_instance *dev); | ||
28 | extern void emac_dbg_unregister(struct emac_instance *dev); | ||
29 | extern void mal_dbg_register(struct mal_instance *mal); | ||
30 | extern void mal_dbg_unregister(struct mal_instance *mal); | ||
31 | extern int emac_init_debug(void) __init; | ||
32 | extern void emac_fini_debug(void) __exit; | ||
33 | extern void emac_dbg_dump_all(void); | ||
34 | |||
35 | # define DBG_LEVEL 1 | ||
36 | |||
37 | #else | ||
38 | |||
39 | # define emac_dbg_register(x) do { } while(0) | ||
40 | # define emac_dbg_unregister(x) do { } while(0) | ||
41 | # define mal_dbg_register(x) do { } while(0) | ||
42 | # define mal_dbg_unregister(x) do { } while(0) | ||
43 | # define emac_init_debug() do { } while(0) | ||
44 | # define emac_fini_debug() do { } while(0) | ||
45 | # define emac_dbg_dump_all() do { } while(0) | ||
46 | |||
47 | # define DBG_LEVEL 0 | ||
48 | |||
49 | #endif | ||
50 | |||
51 | #define EMAC_DBG(dev, name, fmt, arg...) \ | ||
52 | printk(KERN_DEBUG #name "%s: " fmt, dev->ofdev->node->full_name, ## arg) | ||
53 | |||
54 | #if DBG_LEVEL > 0 | ||
55 | # define DBG(d,f,x...) EMAC_DBG(d, emac, f, ##x) | ||
56 | # define MAL_DBG(d,f,x...) EMAC_DBG(d, mal, f, ##x) | ||
57 | # define ZMII_DBG(d,f,x...) EMAC_DBG(d, zmii, f, ##x) | ||
58 | # define RGMII_DBG(d,f,x...) EMAC_DBG(d, rgmii, f, ##x) | ||
59 | # define NL "\n" | ||
60 | #else | ||
61 | # define DBG(f,x...) ((void)0) | ||
62 | # define MAL_DBG(d,f,x...) ((void)0) | ||
63 | # define ZMII_DBG(d,f,x...) ((void)0) | ||
64 | # define RGMII_DBG(d,f,x...) ((void)0) | ||
65 | #endif | ||
66 | #if DBG_LEVEL > 1 | ||
67 | # define DBG2(d,f,x...) DBG(d,f, ##x) | ||
68 | # define MAL_DBG2(d,f,x...) MAL_DBG(d,f, ##x) | ||
69 | # define ZMII_DBG2(d,f,x...) ZMII_DBG(d,f, ##x) | ||
70 | # define RGMII_DBG2(d,f,x...) RGMII_DBG(d,f, ##x) | ||
71 | #else | ||
72 | # define DBG2(f,x...) ((void)0) | ||
73 | # define MAL_DBG2(d,f,x...) ((void)0) | ||
74 | # define ZMII_DBG2(d,f,x...) ((void)0) | ||
75 | # define RGMII_DBG2(d,f,x...) ((void)0) | ||
76 | #endif | ||
77 | |||
78 | #endif /* __IBM_NEWEMAC_DEBUG_H */ | ||
diff --git a/drivers/net/ibm_newemac/emac.h b/drivers/net/ibm_newemac/emac.h new file mode 100644 index 000000000000..bef92efeeadc --- /dev/null +++ b/drivers/net/ibm_newemac/emac.h | |||
@@ -0,0 +1,268 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_newemac/emac.h | ||
3 | * | ||
4 | * Register definitions for PowerPC 4xx on-chip ethernet contoller | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Matt Porter <mporter@kernel.crashing.org> | ||
11 | * Armin Kuster <akuster@mvista.com> | ||
12 | * Copyright 2002-2004 MontaVista Software Inc. | ||
13 | * | ||
14 | * This program is free software; you can redistribute it and/or modify it | ||
15 | * under the terms of the GNU General Public License as published by the | ||
16 | * Free Software Foundation; either version 2 of the License, or (at your | ||
17 | * option) any later version. | ||
18 | * | ||
19 | */ | ||
20 | #ifndef __IBM_NEWEMAC_H | ||
21 | #define __IBM_NEWEMAC_H | ||
22 | |||
23 | #include <linux/types.h> | ||
24 | |||
25 | /* EMAC registers Write Access rules */ | ||
26 | struct emac_regs { | ||
27 | u32 mr0; /* special */ | ||
28 | u32 mr1; /* Reset */ | ||
29 | u32 tmr0; /* special */ | ||
30 | u32 tmr1; /* special */ | ||
31 | u32 rmr; /* Reset */ | ||
32 | u32 isr; /* Always */ | ||
33 | u32 iser; /* Reset */ | ||
34 | u32 iahr; /* Reset, R, T */ | ||
35 | u32 ialr; /* Reset, R, T */ | ||
36 | u32 vtpid; /* Reset, R, T */ | ||
37 | u32 vtci; /* Reset, R, T */ | ||
38 | u32 ptr; /* Reset, T */ | ||
39 | u32 iaht1; /* Reset, R */ | ||
40 | u32 iaht2; /* Reset, R */ | ||
41 | u32 iaht3; /* Reset, R */ | ||
42 | u32 iaht4; /* Reset, R */ | ||
43 | u32 gaht1; /* Reset, R */ | ||
44 | u32 gaht2; /* Reset, R */ | ||
45 | u32 gaht3; /* Reset, R */ | ||
46 | u32 gaht4; /* Reset, R */ | ||
47 | u32 lsah; | ||
48 | u32 lsal; | ||
49 | u32 ipgvr; /* Reset, T */ | ||
50 | u32 stacr; /* special */ | ||
51 | u32 trtr; /* special */ | ||
52 | u32 rwmr; /* Reset */ | ||
53 | u32 octx; | ||
54 | u32 ocrx; | ||
55 | u32 ipcr; | ||
56 | }; | ||
57 | |||
58 | /* | ||
59 | * PHY mode settings (EMAC <-> ZMII/RGMII bridge <-> PHY) | ||
60 | */ | ||
61 | #define PHY_MODE_NA 0 | ||
62 | #define PHY_MODE_MII 1 | ||
63 | #define PHY_MODE_RMII 2 | ||
64 | #define PHY_MODE_SMII 3 | ||
65 | #define PHY_MODE_RGMII 4 | ||
66 | #define PHY_MODE_TBI 5 | ||
67 | #define PHY_MODE_GMII 6 | ||
68 | #define PHY_MODE_RTBI 7 | ||
69 | #define PHY_MODE_SGMII 8 | ||
70 | |||
71 | |||
72 | #define EMAC_ETHTOOL_REGS_VER 0 | ||
73 | #define EMAC_ETHTOOL_REGS_SIZE (sizeof(struct emac_regs) - sizeof(u32)) | ||
74 | #define EMAC4_ETHTOOL_REGS_VER 1 | ||
75 | #define EMAC4_ETHTOOL_REGS_SIZE sizeof(struct emac_regs) | ||
76 | |||
77 | /* EMACx_MR0 */ | ||
78 | #define EMAC_MR0_RXI 0x80000000 | ||
79 | #define EMAC_MR0_TXI 0x40000000 | ||
80 | #define EMAC_MR0_SRST 0x20000000 | ||
81 | #define EMAC_MR0_TXE 0x10000000 | ||
82 | #define EMAC_MR0_RXE 0x08000000 | ||
83 | #define EMAC_MR0_WKE 0x04000000 | ||
84 | |||
85 | /* EMACx_MR1 */ | ||
86 | #define EMAC_MR1_FDE 0x80000000 | ||
87 | #define EMAC_MR1_ILE 0x40000000 | ||
88 | #define EMAC_MR1_VLE 0x20000000 | ||
89 | #define EMAC_MR1_EIFC 0x10000000 | ||
90 | #define EMAC_MR1_APP 0x08000000 | ||
91 | #define EMAC_MR1_IST 0x01000000 | ||
92 | |||
93 | #define EMAC_MR1_MF_MASK 0x00c00000 | ||
94 | #define EMAC_MR1_MF_10 0x00000000 | ||
95 | #define EMAC_MR1_MF_100 0x00400000 | ||
96 | #define EMAC_MR1_MF_1000 0x00800000 | ||
97 | #define EMAC_MR1_MF_1000GPCS 0x00c00000 | ||
98 | #define EMAC_MR1_MF_IPPA(id) (((id) & 0x1f) << 6) | ||
99 | |||
100 | #define EMAC_MR1_RFS_4K 0x00300000 | ||
101 | #define EMAC_MR1_RFS_16K 0x00000000 | ||
102 | #define EMAC_MR1_TFS_2K 0x00080000 | ||
103 | #define EMAC_MR1_TR0_MULT 0x00008000 | ||
104 | #define EMAC_MR1_JPSM 0x00000000 | ||
105 | #define EMAC_MR1_MWSW_001 0x00000000 | ||
106 | #define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR0_MULT) | ||
107 | |||
108 | |||
109 | #define EMAC4_MR1_RFS_2K 0x00100000 | ||
110 | #define EMAC4_MR1_RFS_4K 0x00180000 | ||
111 | #define EMAC4_MR1_RFS_16K 0x00280000 | ||
112 | #define EMAC4_MR1_TFS_2K 0x00020000 | ||
113 | #define EMAC4_MR1_TFS_4K 0x00030000 | ||
114 | #define EMAC4_MR1_TR 0x00008000 | ||
115 | #define EMAC4_MR1_MWSW_001 0x00001000 | ||
116 | #define EMAC4_MR1_JPSM 0x00000800 | ||
117 | #define EMAC4_MR1_OBCI_MASK 0x00000038 | ||
118 | #define EMAC4_MR1_OBCI_50 0x00000000 | ||
119 | #define EMAC4_MR1_OBCI_66 0x00000008 | ||
120 | #define EMAC4_MR1_OBCI_83 0x00000010 | ||
121 | #define EMAC4_MR1_OBCI_100 0x00000018 | ||
122 | #define EMAC4_MR1_OBCI_100P 0x00000020 | ||
123 | #define EMAC4_MR1_OBCI(freq) ((freq) <= 50 ? EMAC4_MR1_OBCI_50 : \ | ||
124 | (freq) <= 66 ? EMAC4_MR1_OBCI_66 : \ | ||
125 | (freq) <= 83 ? EMAC4_MR1_OBCI_83 : \ | ||
126 | (freq) <= 100 ? EMAC4_MR1_OBCI_100 : \ | ||
127 | EMAC4_MR1_OBCI_100P) | ||
128 | |||
129 | /* EMACx_TMR0 */ | ||
130 | #define EMAC_TMR0_GNP 0x80000000 | ||
131 | #define EMAC_TMR0_DEFAULT 0x00000000 | ||
132 | #define EMAC4_TMR0_TFAE_2_32 0x00000001 | ||
133 | #define EMAC4_TMR0_TFAE_4_64 0x00000002 | ||
134 | #define EMAC4_TMR0_TFAE_8_128 0x00000003 | ||
135 | #define EMAC4_TMR0_TFAE_16_256 0x00000004 | ||
136 | #define EMAC4_TMR0_TFAE_32_512 0x00000005 | ||
137 | #define EMAC4_TMR0_TFAE_64_1024 0x00000006 | ||
138 | #define EMAC4_TMR0_TFAE_128_2048 0x00000007 | ||
139 | #define EMAC4_TMR0_DEFAULT EMAC4_TMR0_TFAE_2_32 | ||
140 | #define EMAC_TMR0_XMIT (EMAC_TMR0_GNP | EMAC_TMR0_DEFAULT) | ||
141 | #define EMAC4_TMR0_XMIT (EMAC_TMR0_GNP | EMAC4_TMR0_DEFAULT) | ||
142 | |||
143 | /* EMACx_TMR1 */ | ||
144 | |||
145 | #define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0xff) << 16)) | ||
146 | #define EMAC4_TMR1(l,h) (((l) << 27) | (((h) & 0x3ff) << 14)) | ||
147 | |||
148 | /* EMACx_RMR */ | ||
149 | #define EMAC_RMR_SP 0x80000000 | ||
150 | #define EMAC_RMR_SFCS 0x40000000 | ||
151 | #define EMAC_RMR_RRP 0x20000000 | ||
152 | #define EMAC_RMR_RFP 0x10000000 | ||
153 | #define EMAC_RMR_ROP 0x08000000 | ||
154 | #define EMAC_RMR_RPIR 0x04000000 | ||
155 | #define EMAC_RMR_PPP 0x02000000 | ||
156 | #define EMAC_RMR_PME 0x01000000 | ||
157 | #define EMAC_RMR_PMME 0x00800000 | ||
158 | #define EMAC_RMR_IAE 0x00400000 | ||
159 | #define EMAC_RMR_MIAE 0x00200000 | ||
160 | #define EMAC_RMR_BAE 0x00100000 | ||
161 | #define EMAC_RMR_MAE 0x00080000 | ||
162 | #define EMAC_RMR_BASE 0x00000000 | ||
163 | #define EMAC4_RMR_RFAF_2_32 0x00000001 | ||
164 | #define EMAC4_RMR_RFAF_4_64 0x00000002 | ||
165 | #define EMAC4_RMR_RFAF_8_128 0x00000003 | ||
166 | #define EMAC4_RMR_RFAF_16_256 0x00000004 | ||
167 | #define EMAC4_RMR_RFAF_32_512 0x00000005 | ||
168 | #define EMAC4_RMR_RFAF_64_1024 0x00000006 | ||
169 | #define EMAC4_RMR_RFAF_128_2048 0x00000007 | ||
170 | #define EMAC4_RMR_BASE EMAC4_RMR_RFAF_128_2048 | ||
171 | |||
172 | /* EMACx_ISR & EMACx_ISER */ | ||
173 | #define EMAC4_ISR_TXPE 0x20000000 | ||
174 | #define EMAC4_ISR_RXPE 0x10000000 | ||
175 | #define EMAC4_ISR_TXUE 0x08000000 | ||
176 | #define EMAC4_ISR_RXOE 0x04000000 | ||
177 | #define EMAC_ISR_OVR 0x02000000 | ||
178 | #define EMAC_ISR_PP 0x01000000 | ||
179 | #define EMAC_ISR_BP 0x00800000 | ||
180 | #define EMAC_ISR_RP 0x00400000 | ||
181 | #define EMAC_ISR_SE 0x00200000 | ||
182 | #define EMAC_ISR_ALE 0x00100000 | ||
183 | #define EMAC_ISR_BFCS 0x00080000 | ||
184 | #define EMAC_ISR_PTLE 0x00040000 | ||
185 | #define EMAC_ISR_ORE 0x00020000 | ||
186 | #define EMAC_ISR_IRE 0x00010000 | ||
187 | #define EMAC_ISR_SQE 0x00000080 | ||
188 | #define EMAC_ISR_TE 0x00000040 | ||
189 | #define EMAC_ISR_MOS 0x00000002 | ||
190 | #define EMAC_ISR_MOF 0x00000001 | ||
191 | |||
192 | /* EMACx_STACR */ | ||
193 | #define EMAC_STACR_PHYD_MASK 0xffff | ||
194 | #define EMAC_STACR_PHYD_SHIFT 16 | ||
195 | #define EMAC_STACR_OC 0x00008000 | ||
196 | #define EMAC_STACR_PHYE 0x00004000 | ||
197 | #define EMAC_STACR_STAC_MASK 0x00003000 | ||
198 | #define EMAC_STACR_STAC_READ 0x00001000 | ||
199 | #define EMAC_STACR_STAC_WRITE 0x00002000 | ||
200 | #define EMAC_STACR_OPBC_MASK 0x00000C00 | ||
201 | #define EMAC_STACR_OPBC_50 0x00000000 | ||
202 | #define EMAC_STACR_OPBC_66 0x00000400 | ||
203 | #define EMAC_STACR_OPBC_83 0x00000800 | ||
204 | #define EMAC_STACR_OPBC_100 0x00000C00 | ||
205 | #define EMAC_STACR_OPBC(freq) ((freq) <= 50 ? EMAC_STACR_OPBC_50 : \ | ||
206 | (freq) <= 66 ? EMAC_STACR_OPBC_66 : \ | ||
207 | (freq) <= 83 ? EMAC_STACR_OPBC_83 : EMAC_STACR_OPBC_100) | ||
208 | #define EMAC_STACR_BASE(opb) EMAC_STACR_OPBC(opb) | ||
209 | #define EMAC4_STACR_BASE(opb) 0x00000000 | ||
210 | #define EMAC_STACR_PCDA_MASK 0x1f | ||
211 | #define EMAC_STACR_PCDA_SHIFT 5 | ||
212 | #define EMAC_STACR_PRA_MASK 0x1f | ||
213 | #define EMACX_STACR_STAC_MASK 0x00003800 | ||
214 | #define EMACX_STACR_STAC_READ 0x00001000 | ||
215 | #define EMACX_STACR_STAC_WRITE 0x00000800 | ||
216 | #define EMACX_STACR_STAC_IND_ADDR 0x00002000 | ||
217 | #define EMACX_STACR_STAC_IND_READ 0x00003800 | ||
218 | #define EMACX_STACR_STAC_IND_READINC 0x00003000 | ||
219 | #define EMACX_STACR_STAC_IND_WRITE 0x00002800 | ||
220 | |||
221 | |||
222 | /* EMACx_TRTR */ | ||
223 | #define EMAC_TRTR_SHIFT_EMAC4 27 | ||
224 | #define EMAC_TRTR_SHIFT 24 | ||
225 | |||
226 | /* EMAC specific TX descriptor control fields (write access) */ | ||
227 | #define EMAC_TX_CTRL_GFCS 0x0200 | ||
228 | #define EMAC_TX_CTRL_GP 0x0100 | ||
229 | #define EMAC_TX_CTRL_ISA 0x0080 | ||
230 | #define EMAC_TX_CTRL_RSA 0x0040 | ||
231 | #define EMAC_TX_CTRL_IVT 0x0020 | ||
232 | #define EMAC_TX_CTRL_RVT 0x0010 | ||
233 | #define EMAC_TX_CTRL_TAH_CSUM 0x000e | ||
234 | |||
235 | /* EMAC specific TX descriptor status fields (read access) */ | ||
236 | #define EMAC_TX_ST_BFCS 0x0200 | ||
237 | #define EMAC_TX_ST_LCS 0x0080 | ||
238 | #define EMAC_TX_ST_ED 0x0040 | ||
239 | #define EMAC_TX_ST_EC 0x0020 | ||
240 | #define EMAC_TX_ST_LC 0x0010 | ||
241 | #define EMAC_TX_ST_MC 0x0008 | ||
242 | #define EMAC_TX_ST_SC 0x0004 | ||
243 | #define EMAC_TX_ST_UR 0x0002 | ||
244 | #define EMAC_TX_ST_SQE 0x0001 | ||
245 | #define EMAC_IS_BAD_TX (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \ | ||
246 | EMAC_TX_ST_EC | EMAC_TX_ST_LC | \ | ||
247 | EMAC_TX_ST_MC | EMAC_TX_ST_UR) | ||
248 | #define EMAC_IS_BAD_TX_TAH (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \ | ||
249 | EMAC_TX_ST_EC | EMAC_TX_ST_LC) | ||
250 | |||
251 | /* EMAC specific RX descriptor status fields (read access) */ | ||
252 | #define EMAC_RX_ST_OE 0x0200 | ||
253 | #define EMAC_RX_ST_PP 0x0100 | ||
254 | #define EMAC_RX_ST_BP 0x0080 | ||
255 | #define EMAC_RX_ST_RP 0x0040 | ||
256 | #define EMAC_RX_ST_SE 0x0020 | ||
257 | #define EMAC_RX_ST_AE 0x0010 | ||
258 | #define EMAC_RX_ST_BFCS 0x0008 | ||
259 | #define EMAC_RX_ST_PTL 0x0004 | ||
260 | #define EMAC_RX_ST_ORE 0x0002 | ||
261 | #define EMAC_RX_ST_IRE 0x0001 | ||
262 | #define EMAC_RX_TAH_BAD_CSUM 0x0003 | ||
263 | #define EMAC_BAD_RX_MASK (EMAC_RX_ST_OE | EMAC_RX_ST_BP | \ | ||
264 | EMAC_RX_ST_RP | EMAC_RX_ST_SE | \ | ||
265 | EMAC_RX_ST_AE | EMAC_RX_ST_BFCS | \ | ||
266 | EMAC_RX_ST_PTL | EMAC_RX_ST_ORE | \ | ||
267 | EMAC_RX_ST_IRE ) | ||
268 | #endif /* __IBM_NEWEMAC_H */ | ||
diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c new file mode 100644 index 000000000000..c4335b7d308c --- /dev/null +++ b/drivers/net/ibm_newemac/mal.c | |||
@@ -0,0 +1,728 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_newemac/mal.c | ||
3 | * | ||
4 | * Memory Access Layer (MAL) support | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Benjamin Herrenschmidt <benh@kernel.crashing.org>, | ||
11 | * David Gibson <hermes@gibson.dropbear.id.au>, | ||
12 | * | ||
13 | * Armin Kuster <akuster@mvista.com> | ||
14 | * Copyright 2002 MontaVista Softare Inc. | ||
15 | * | ||
16 | * This program is free software; you can redistribute it and/or modify it | ||
17 | * under the terms of the GNU General Public License as published by the | ||
18 | * Free Software Foundation; either version 2 of the License, or (at your | ||
19 | * option) any later version. | ||
20 | * | ||
21 | */ | ||
22 | |||
23 | #include <linux/delay.h> | ||
24 | |||
25 | #include "core.h" | ||
26 | |||
27 | static int mal_count; | ||
28 | |||
29 | int __devinit mal_register_commac(struct mal_instance *mal, | ||
30 | struct mal_commac *commac) | ||
31 | { | ||
32 | unsigned long flags; | ||
33 | |||
34 | spin_lock_irqsave(&mal->lock, flags); | ||
35 | |||
36 | MAL_DBG(mal, "reg(%08x, %08x)" NL, | ||
37 | commac->tx_chan_mask, commac->rx_chan_mask); | ||
38 | |||
39 | /* Don't let multiple commacs claim the same channel(s) */ | ||
40 | if ((mal->tx_chan_mask & commac->tx_chan_mask) || | ||
41 | (mal->rx_chan_mask & commac->rx_chan_mask)) { | ||
42 | spin_unlock_irqrestore(&mal->lock, flags); | ||
43 | printk(KERN_WARNING "mal%d: COMMAC channels conflict!\n", | ||
44 | mal->index); | ||
45 | return -EBUSY; | ||
46 | } | ||
47 | |||
48 | mal->tx_chan_mask |= commac->tx_chan_mask; | ||
49 | mal->rx_chan_mask |= commac->rx_chan_mask; | ||
50 | list_add(&commac->list, &mal->list); | ||
51 | |||
52 | spin_unlock_irqrestore(&mal->lock, flags); | ||
53 | |||
54 | return 0; | ||
55 | } | ||
56 | |||
57 | void __devexit mal_unregister_commac(struct mal_instance *mal, | ||
58 | struct mal_commac *commac) | ||
59 | { | ||
60 | unsigned long flags; | ||
61 | |||
62 | spin_lock_irqsave(&mal->lock, flags); | ||
63 | |||
64 | MAL_DBG(mal, "unreg(%08x, %08x)" NL, | ||
65 | commac->tx_chan_mask, commac->rx_chan_mask); | ||
66 | |||
67 | mal->tx_chan_mask &= ~commac->tx_chan_mask; | ||
68 | mal->rx_chan_mask &= ~commac->rx_chan_mask; | ||
69 | list_del_init(&commac->list); | ||
70 | |||
71 | spin_unlock_irqrestore(&mal->lock, flags); | ||
72 | } | ||
73 | |||
74 | int mal_set_rcbs(struct mal_instance *mal, int channel, unsigned long size) | ||
75 | { | ||
76 | BUG_ON(channel < 0 || channel >= mal->num_rx_chans || | ||
77 | size > MAL_MAX_RX_SIZE); | ||
78 | |||
79 | MAL_DBG(mal, "set_rbcs(%d, %lu)" NL, channel, size); | ||
80 | |||
81 | if (size & 0xf) { | ||
82 | printk(KERN_WARNING | ||
83 | "mal%d: incorrect RX size %lu for the channel %d\n", | ||
84 | mal->index, size, channel); | ||
85 | return -EINVAL; | ||
86 | } | ||
87 | |||
88 | set_mal_dcrn(mal, MAL_RCBS(channel), size >> 4); | ||
89 | return 0; | ||
90 | } | ||
91 | |||
92 | int mal_tx_bd_offset(struct mal_instance *mal, int channel) | ||
93 | { | ||
94 | BUG_ON(channel < 0 || channel >= mal->num_tx_chans); | ||
95 | |||
96 | return channel * NUM_TX_BUFF; | ||
97 | } | ||
98 | |||
99 | int mal_rx_bd_offset(struct mal_instance *mal, int channel) | ||
100 | { | ||
101 | BUG_ON(channel < 0 || channel >= mal->num_rx_chans); | ||
102 | return mal->num_tx_chans * NUM_TX_BUFF + channel * NUM_RX_BUFF; | ||
103 | } | ||
104 | |||
105 | void mal_enable_tx_channel(struct mal_instance *mal, int channel) | ||
106 | { | ||
107 | unsigned long flags; | ||
108 | |||
109 | spin_lock_irqsave(&mal->lock, flags); | ||
110 | |||
111 | MAL_DBG(mal, "enable_tx(%d)" NL, channel); | ||
112 | |||
113 | set_mal_dcrn(mal, MAL_TXCASR, | ||
114 | get_mal_dcrn(mal, MAL_TXCASR) | MAL_CHAN_MASK(channel)); | ||
115 | |||
116 | spin_unlock_irqrestore(&mal->lock, flags); | ||
117 | } | ||
118 | |||
119 | void mal_disable_tx_channel(struct mal_instance *mal, int channel) | ||
120 | { | ||
121 | set_mal_dcrn(mal, MAL_TXCARR, MAL_CHAN_MASK(channel)); | ||
122 | |||
123 | MAL_DBG(mal, "disable_tx(%d)" NL, channel); | ||
124 | } | ||
125 | |||
126 | void mal_enable_rx_channel(struct mal_instance *mal, int channel) | ||
127 | { | ||
128 | unsigned long flags; | ||
129 | |||
130 | spin_lock_irqsave(&mal->lock, flags); | ||
131 | |||
132 | MAL_DBG(mal, "enable_rx(%d)" NL, channel); | ||
133 | |||
134 | set_mal_dcrn(mal, MAL_RXCASR, | ||
135 | get_mal_dcrn(mal, MAL_RXCASR) | MAL_CHAN_MASK(channel)); | ||
136 | |||
137 | spin_unlock_irqrestore(&mal->lock, flags); | ||
138 | } | ||
139 | |||
140 | void mal_disable_rx_channel(struct mal_instance *mal, int channel) | ||
141 | { | ||
142 | set_mal_dcrn(mal, MAL_RXCARR, MAL_CHAN_MASK(channel)); | ||
143 | |||
144 | MAL_DBG(mal, "disable_rx(%d)" NL, channel); | ||
145 | } | ||
146 | |||
147 | void mal_poll_add(struct mal_instance *mal, struct mal_commac *commac) | ||
148 | { | ||
149 | unsigned long flags; | ||
150 | |||
151 | spin_lock_irqsave(&mal->lock, flags); | ||
152 | |||
153 | MAL_DBG(mal, "poll_add(%p)" NL, commac); | ||
154 | |||
155 | /* starts disabled */ | ||
156 | set_bit(MAL_COMMAC_POLL_DISABLED, &commac->flags); | ||
157 | |||
158 | list_add_tail(&commac->poll_list, &mal->poll_list); | ||
159 | |||
160 | spin_unlock_irqrestore(&mal->lock, flags); | ||
161 | } | ||
162 | |||
163 | void mal_poll_del(struct mal_instance *mal, struct mal_commac *commac) | ||
164 | { | ||
165 | unsigned long flags; | ||
166 | |||
167 | spin_lock_irqsave(&mal->lock, flags); | ||
168 | |||
169 | MAL_DBG(mal, "poll_del(%p)" NL, commac); | ||
170 | |||
171 | list_del(&commac->poll_list); | ||
172 | |||
173 | spin_unlock_irqrestore(&mal->lock, flags); | ||
174 | } | ||
175 | |||
176 | /* synchronized by mal_poll() */ | ||
177 | static inline void mal_enable_eob_irq(struct mal_instance *mal) | ||
178 | { | ||
179 | MAL_DBG2(mal, "enable_irq" NL); | ||
180 | |||
181 | // XXX might want to cache MAL_CFG as the DCR read can be slooooow | ||
182 | set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) | MAL_CFG_EOPIE); | ||
183 | } | ||
184 | |||
185 | /* synchronized by __LINK_STATE_RX_SCHED bit in ndev->state */ | ||
186 | static inline void mal_disable_eob_irq(struct mal_instance *mal) | ||
187 | { | ||
188 | // XXX might want to cache MAL_CFG as the DCR read can be slooooow | ||
189 | set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) & ~MAL_CFG_EOPIE); | ||
190 | |||
191 | MAL_DBG2(mal, "disable_irq" NL); | ||
192 | } | ||
193 | |||
194 | static irqreturn_t mal_serr(int irq, void *dev_instance) | ||
195 | { | ||
196 | struct mal_instance *mal = dev_instance; | ||
197 | |||
198 | u32 esr = get_mal_dcrn(mal, MAL_ESR); | ||
199 | |||
200 | /* Clear the error status register */ | ||
201 | set_mal_dcrn(mal, MAL_ESR, esr); | ||
202 | |||
203 | MAL_DBG(mal, "SERR %08x" NL, esr); | ||
204 | |||
205 | if (esr & MAL_ESR_EVB) { | ||
206 | if (esr & MAL_ESR_DE) { | ||
207 | /* We ignore Descriptor error, | ||
208 | * TXDE or RXDE interrupt will be generated anyway. | ||
209 | */ | ||
210 | return IRQ_HANDLED; | ||
211 | } | ||
212 | |||
213 | if (esr & MAL_ESR_PEIN) { | ||
214 | /* PLB error, it's probably buggy hardware or | ||
215 | * incorrect physical address in BD (i.e. bug) | ||
216 | */ | ||
217 | if (net_ratelimit()) | ||
218 | printk(KERN_ERR | ||
219 | "mal%d: system error, " | ||
220 | "PLB (ESR = 0x%08x)\n", | ||
221 | mal->index, esr); | ||
222 | return IRQ_HANDLED; | ||
223 | } | ||
224 | |||
225 | /* OPB error, it's probably buggy hardware or incorrect | ||
226 | * EBC setup | ||
227 | */ | ||
228 | if (net_ratelimit()) | ||
229 | printk(KERN_ERR | ||
230 | "mal%d: system error, OPB (ESR = 0x%08x)\n", | ||
231 | mal->index, esr); | ||
232 | } | ||
233 | return IRQ_HANDLED; | ||
234 | } | ||
235 | |||
236 | static inline void mal_schedule_poll(struct mal_instance *mal) | ||
237 | { | ||
238 | if (likely(netif_rx_schedule_prep(&mal->poll_dev))) { | ||
239 | MAL_DBG2(mal, "schedule_poll" NL); | ||
240 | mal_disable_eob_irq(mal); | ||
241 | __netif_rx_schedule(&mal->poll_dev); | ||
242 | } else | ||
243 | MAL_DBG2(mal, "already in poll" NL); | ||
244 | } | ||
245 | |||
246 | static irqreturn_t mal_txeob(int irq, void *dev_instance) | ||
247 | { | ||
248 | struct mal_instance *mal = dev_instance; | ||
249 | |||
250 | u32 r = get_mal_dcrn(mal, MAL_TXEOBISR); | ||
251 | |||
252 | MAL_DBG2(mal, "txeob %08x" NL, r); | ||
253 | |||
254 | mal_schedule_poll(mal); | ||
255 | set_mal_dcrn(mal, MAL_TXEOBISR, r); | ||
256 | |||
257 | return IRQ_HANDLED; | ||
258 | } | ||
259 | |||
260 | static irqreturn_t mal_rxeob(int irq, void *dev_instance) | ||
261 | { | ||
262 | struct mal_instance *mal = dev_instance; | ||
263 | |||
264 | u32 r = get_mal_dcrn(mal, MAL_RXEOBISR); | ||
265 | |||
266 | MAL_DBG2(mal, "rxeob %08x" NL, r); | ||
267 | |||
268 | mal_schedule_poll(mal); | ||
269 | set_mal_dcrn(mal, MAL_RXEOBISR, r); | ||
270 | |||
271 | return IRQ_HANDLED; | ||
272 | } | ||
273 | |||
274 | static irqreturn_t mal_txde(int irq, void *dev_instance) | ||
275 | { | ||
276 | struct mal_instance *mal = dev_instance; | ||
277 | |||
278 | u32 deir = get_mal_dcrn(mal, MAL_TXDEIR); | ||
279 | set_mal_dcrn(mal, MAL_TXDEIR, deir); | ||
280 | |||
281 | MAL_DBG(mal, "txde %08x" NL, deir); | ||
282 | |||
283 | if (net_ratelimit()) | ||
284 | printk(KERN_ERR | ||
285 | "mal%d: TX descriptor error (TXDEIR = 0x%08x)\n", | ||
286 | mal->index, deir); | ||
287 | |||
288 | return IRQ_HANDLED; | ||
289 | } | ||
290 | |||
291 | static irqreturn_t mal_rxde(int irq, void *dev_instance) | ||
292 | { | ||
293 | struct mal_instance *mal = dev_instance; | ||
294 | struct list_head *l; | ||
295 | |||
296 | u32 deir = get_mal_dcrn(mal, MAL_RXDEIR); | ||
297 | |||
298 | MAL_DBG(mal, "rxde %08x" NL, deir); | ||
299 | |||
300 | list_for_each(l, &mal->list) { | ||
301 | struct mal_commac *mc = list_entry(l, struct mal_commac, list); | ||
302 | if (deir & mc->rx_chan_mask) { | ||
303 | set_bit(MAL_COMMAC_RX_STOPPED, &mc->flags); | ||
304 | mc->ops->rxde(mc->dev); | ||
305 | } | ||
306 | } | ||
307 | |||
308 | mal_schedule_poll(mal); | ||
309 | set_mal_dcrn(mal, MAL_RXDEIR, deir); | ||
310 | |||
311 | return IRQ_HANDLED; | ||
312 | } | ||
313 | |||
314 | void mal_poll_disable(struct mal_instance *mal, struct mal_commac *commac) | ||
315 | { | ||
316 | /* Spinlock-type semantics: only one caller disable poll at a time */ | ||
317 | while (test_and_set_bit(MAL_COMMAC_POLL_DISABLED, &commac->flags)) | ||
318 | msleep(1); | ||
319 | |||
320 | /* Synchronize with the MAL NAPI poller. */ | ||
321 | while (test_bit(__LINK_STATE_RX_SCHED, &mal->poll_dev.state)) | ||
322 | msleep(1); | ||
323 | } | ||
324 | |||
325 | void mal_poll_enable(struct mal_instance *mal, struct mal_commac *commac) | ||
326 | { | ||
327 | smp_wmb(); | ||
328 | clear_bit(MAL_COMMAC_POLL_DISABLED, &commac->flags); | ||
329 | |||
330 | // XXX might want to kick a poll now... | ||
331 | } | ||
332 | |||
333 | static int mal_poll(struct net_device *ndev, int *budget) | ||
334 | { | ||
335 | struct mal_instance *mal = netdev_priv(ndev); | ||
336 | struct list_head *l; | ||
337 | int rx_work_limit = min(ndev->quota, *budget), received = 0, done; | ||
338 | unsigned long flags; | ||
339 | |||
340 | MAL_DBG2(mal, "poll(%d) %d ->" NL, *budget, | ||
341 | rx_work_limit); | ||
342 | again: | ||
343 | /* Process TX skbs */ | ||
344 | list_for_each(l, &mal->poll_list) { | ||
345 | struct mal_commac *mc = | ||
346 | list_entry(l, struct mal_commac, poll_list); | ||
347 | mc->ops->poll_tx(mc->dev); | ||
348 | } | ||
349 | |||
350 | /* Process RX skbs. | ||
351 | * | ||
352 | * We _might_ need something more smart here to enforce polling | ||
353 | * fairness. | ||
354 | */ | ||
355 | list_for_each(l, &mal->poll_list) { | ||
356 | struct mal_commac *mc = | ||
357 | list_entry(l, struct mal_commac, poll_list); | ||
358 | int n; | ||
359 | if (unlikely(test_bit(MAL_COMMAC_POLL_DISABLED, &mc->flags))) | ||
360 | continue; | ||
361 | n = mc->ops->poll_rx(mc->dev, rx_work_limit); | ||
362 | if (n) { | ||
363 | received += n; | ||
364 | rx_work_limit -= n; | ||
365 | if (rx_work_limit <= 0) { | ||
366 | done = 0; | ||
367 | // XXX What if this is the last one ? | ||
368 | goto more_work; | ||
369 | } | ||
370 | } | ||
371 | } | ||
372 | |||
373 | /* We need to disable IRQs to protect from RXDE IRQ here */ | ||
374 | spin_lock_irqsave(&mal->lock, flags); | ||
375 | __netif_rx_complete(ndev); | ||
376 | mal_enable_eob_irq(mal); | ||
377 | spin_unlock_irqrestore(&mal->lock, flags); | ||
378 | |||
379 | done = 1; | ||
380 | |||
381 | /* Check for "rotting" packet(s) */ | ||
382 | list_for_each(l, &mal->poll_list) { | ||
383 | struct mal_commac *mc = | ||
384 | list_entry(l, struct mal_commac, poll_list); | ||
385 | if (unlikely(test_bit(MAL_COMMAC_POLL_DISABLED, &mc->flags))) | ||
386 | continue; | ||
387 | if (unlikely(mc->ops->peek_rx(mc->dev) || | ||
388 | test_bit(MAL_COMMAC_RX_STOPPED, &mc->flags))) { | ||
389 | MAL_DBG2(mal, "rotting packet" NL); | ||
390 | if (netif_rx_reschedule(ndev, received)) | ||
391 | mal_disable_eob_irq(mal); | ||
392 | else | ||
393 | MAL_DBG2(mal, "already in poll list" NL); | ||
394 | |||
395 | if (rx_work_limit > 0) | ||
396 | goto again; | ||
397 | else | ||
398 | goto more_work; | ||
399 | } | ||
400 | mc->ops->poll_tx(mc->dev); | ||
401 | } | ||
402 | |||
403 | more_work: | ||
404 | ndev->quota -= received; | ||
405 | *budget -= received; | ||
406 | |||
407 | MAL_DBG2(mal, "poll() %d <- %d" NL, *budget, | ||
408 | done ? 0 : 1); | ||
409 | |||
410 | return done ? 0 : 1; | ||
411 | } | ||
412 | |||
413 | static void mal_reset(struct mal_instance *mal) | ||
414 | { | ||
415 | int n = 10; | ||
416 | |||
417 | MAL_DBG(mal, "reset" NL); | ||
418 | |||
419 | set_mal_dcrn(mal, MAL_CFG, MAL_CFG_SR); | ||
420 | |||
421 | /* Wait for reset to complete (1 system clock) */ | ||
422 | while ((get_mal_dcrn(mal, MAL_CFG) & MAL_CFG_SR) && n) | ||
423 | --n; | ||
424 | |||
425 | if (unlikely(!n)) | ||
426 | printk(KERN_ERR "mal%d: reset timeout\n", mal->index); | ||
427 | } | ||
428 | |||
429 | int mal_get_regs_len(struct mal_instance *mal) | ||
430 | { | ||
431 | return sizeof(struct emac_ethtool_regs_subhdr) + | ||
432 | sizeof(struct mal_regs); | ||
433 | } | ||
434 | |||
435 | void *mal_dump_regs(struct mal_instance *mal, void *buf) | ||
436 | { | ||
437 | struct emac_ethtool_regs_subhdr *hdr = buf; | ||
438 | struct mal_regs *regs = (struct mal_regs *)(hdr + 1); | ||
439 | int i; | ||
440 | |||
441 | hdr->version = mal->version; | ||
442 | hdr->index = mal->index; | ||
443 | |||
444 | regs->tx_count = mal->num_tx_chans; | ||
445 | regs->rx_count = mal->num_rx_chans; | ||
446 | |||
447 | regs->cfg = get_mal_dcrn(mal, MAL_CFG); | ||
448 | regs->esr = get_mal_dcrn(mal, MAL_ESR); | ||
449 | regs->ier = get_mal_dcrn(mal, MAL_IER); | ||
450 | regs->tx_casr = get_mal_dcrn(mal, MAL_TXCASR); | ||
451 | regs->tx_carr = get_mal_dcrn(mal, MAL_TXCARR); | ||
452 | regs->tx_eobisr = get_mal_dcrn(mal, MAL_TXEOBISR); | ||
453 | regs->tx_deir = get_mal_dcrn(mal, MAL_TXDEIR); | ||
454 | regs->rx_casr = get_mal_dcrn(mal, MAL_RXCASR); | ||
455 | regs->rx_carr = get_mal_dcrn(mal, MAL_RXCARR); | ||
456 | regs->rx_eobisr = get_mal_dcrn(mal, MAL_RXEOBISR); | ||
457 | regs->rx_deir = get_mal_dcrn(mal, MAL_RXDEIR); | ||
458 | |||
459 | for (i = 0; i < regs->tx_count; ++i) | ||
460 | regs->tx_ctpr[i] = get_mal_dcrn(mal, MAL_TXCTPR(i)); | ||
461 | |||
462 | for (i = 0; i < regs->rx_count; ++i) { | ||
463 | regs->rx_ctpr[i] = get_mal_dcrn(mal, MAL_RXCTPR(i)); | ||
464 | regs->rcbs[i] = get_mal_dcrn(mal, MAL_RCBS(i)); | ||
465 | } | ||
466 | return regs + 1; | ||
467 | } | ||
468 | |||
469 | static int __devinit mal_probe(struct of_device *ofdev, | ||
470 | const struct of_device_id *match) | ||
471 | { | ||
472 | struct mal_instance *mal; | ||
473 | int err = 0, i, bd_size; | ||
474 | int index = mal_count++; | ||
475 | const u32 *prop; | ||
476 | u32 cfg; | ||
477 | |||
478 | mal = kzalloc(sizeof(struct mal_instance), GFP_KERNEL); | ||
479 | if (!mal) { | ||
480 | printk(KERN_ERR | ||
481 | "mal%d: out of memory allocating MAL structure!\n", | ||
482 | index); | ||
483 | return -ENOMEM; | ||
484 | } | ||
485 | mal->index = index; | ||
486 | mal->ofdev = ofdev; | ||
487 | mal->version = of_device_is_compatible(ofdev->node, "ibm,mcmal2") ? 2 : 1; | ||
488 | |||
489 | MAL_DBG(mal, "probe" NL); | ||
490 | |||
491 | prop = of_get_property(ofdev->node, "num-tx-chans", NULL); | ||
492 | if (prop == NULL) { | ||
493 | printk(KERN_ERR | ||
494 | "mal%d: can't find MAL num-tx-chans property!\n", | ||
495 | index); | ||
496 | err = -ENODEV; | ||
497 | goto fail; | ||
498 | } | ||
499 | mal->num_tx_chans = prop[0]; | ||
500 | |||
501 | prop = of_get_property(ofdev->node, "num-rx-chans", NULL); | ||
502 | if (prop == NULL) { | ||
503 | printk(KERN_ERR | ||
504 | "mal%d: can't find MAL num-rx-chans property!\n", | ||
505 | index); | ||
506 | err = -ENODEV; | ||
507 | goto fail; | ||
508 | } | ||
509 | mal->num_rx_chans = prop[0]; | ||
510 | |||
511 | mal->dcr_base = dcr_resource_start(ofdev->node, 0); | ||
512 | if (mal->dcr_base == 0) { | ||
513 | printk(KERN_ERR | ||
514 | "mal%d: can't find DCR resource!\n", index); | ||
515 | err = -ENODEV; | ||
516 | goto fail; | ||
517 | } | ||
518 | mal->dcr_host = dcr_map(ofdev->node, mal->dcr_base, 0x100); | ||
519 | if (!DCR_MAP_OK(mal->dcr_host)) { | ||
520 | printk(KERN_ERR | ||
521 | "mal%d: failed to map DCRs !\n", index); | ||
522 | err = -ENODEV; | ||
523 | goto fail; | ||
524 | } | ||
525 | |||
526 | mal->txeob_irq = irq_of_parse_and_map(ofdev->node, 0); | ||
527 | mal->rxeob_irq = irq_of_parse_and_map(ofdev->node, 1); | ||
528 | mal->serr_irq = irq_of_parse_and_map(ofdev->node, 2); | ||
529 | mal->txde_irq = irq_of_parse_and_map(ofdev->node, 3); | ||
530 | mal->rxde_irq = irq_of_parse_and_map(ofdev->node, 4); | ||
531 | if (mal->txeob_irq == NO_IRQ || mal->rxeob_irq == NO_IRQ || | ||
532 | mal->serr_irq == NO_IRQ || mal->txde_irq == NO_IRQ || | ||
533 | mal->rxde_irq == NO_IRQ) { | ||
534 | printk(KERN_ERR | ||
535 | "mal%d: failed to map interrupts !\n", index); | ||
536 | err = -ENODEV; | ||
537 | goto fail_unmap; | ||
538 | } | ||
539 | |||
540 | INIT_LIST_HEAD(&mal->poll_list); | ||
541 | set_bit(__LINK_STATE_START, &mal->poll_dev.state); | ||
542 | mal->poll_dev.weight = CONFIG_IBM_NEW_EMAC_POLL_WEIGHT; | ||
543 | mal->poll_dev.poll = mal_poll; | ||
544 | mal->poll_dev.priv = mal; | ||
545 | atomic_set(&mal->poll_dev.refcnt, 1); | ||
546 | INIT_LIST_HEAD(&mal->list); | ||
547 | spin_lock_init(&mal->lock); | ||
548 | |||
549 | /* Load power-on reset defaults */ | ||
550 | mal_reset(mal); | ||
551 | |||
552 | /* Set the MAL configuration register */ | ||
553 | cfg = (mal->version == 2) ? MAL2_CFG_DEFAULT : MAL1_CFG_DEFAULT; | ||
554 | cfg |= MAL_CFG_PLBB | MAL_CFG_OPBBL | MAL_CFG_LEA; | ||
555 | |||
556 | /* Current Axon is not happy with priority being non-0, it can | ||
557 | * deadlock, fix it up here | ||
558 | */ | ||
559 | if (of_device_is_compatible(ofdev->node, "ibm,mcmal-axon")) | ||
560 | cfg &= ~(MAL2_CFG_RPP_10 | MAL2_CFG_WPP_10); | ||
561 | |||
562 | /* Apply configuration */ | ||
563 | set_mal_dcrn(mal, MAL_CFG, cfg); | ||
564 | |||
565 | /* Allocate space for BD rings */ | ||
566 | BUG_ON(mal->num_tx_chans <= 0 || mal->num_tx_chans > 32); | ||
567 | BUG_ON(mal->num_rx_chans <= 0 || mal->num_rx_chans > 32); | ||
568 | |||
569 | bd_size = sizeof(struct mal_descriptor) * | ||
570 | (NUM_TX_BUFF * mal->num_tx_chans + | ||
571 | NUM_RX_BUFF * mal->num_rx_chans); | ||
572 | mal->bd_virt = | ||
573 | dma_alloc_coherent(&ofdev->dev, bd_size, &mal->bd_dma, | ||
574 | GFP_KERNEL); | ||
575 | if (mal->bd_virt == NULL) { | ||
576 | printk(KERN_ERR | ||
577 | "mal%d: out of memory allocating RX/TX descriptors!\n", | ||
578 | index); | ||
579 | err = -ENOMEM; | ||
580 | goto fail_unmap; | ||
581 | } | ||
582 | memset(mal->bd_virt, 0, bd_size); | ||
583 | |||
584 | for (i = 0; i < mal->num_tx_chans; ++i) | ||
585 | set_mal_dcrn(mal, MAL_TXCTPR(i), mal->bd_dma + | ||
586 | sizeof(struct mal_descriptor) * | ||
587 | mal_tx_bd_offset(mal, i)); | ||
588 | |||
589 | for (i = 0; i < mal->num_rx_chans; ++i) | ||
590 | set_mal_dcrn(mal, MAL_RXCTPR(i), mal->bd_dma + | ||
591 | sizeof(struct mal_descriptor) * | ||
592 | mal_rx_bd_offset(mal, i)); | ||
593 | |||
594 | err = request_irq(mal->serr_irq, mal_serr, 0, "MAL SERR", mal); | ||
595 | if (err) | ||
596 | goto fail2; | ||
597 | err = request_irq(mal->txde_irq, mal_txde, 0, "MAL TX DE", mal); | ||
598 | if (err) | ||
599 | goto fail3; | ||
600 | err = request_irq(mal->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal); | ||
601 | if (err) | ||
602 | goto fail4; | ||
603 | err = request_irq(mal->rxde_irq, mal_rxde, 0, "MAL RX DE", mal); | ||
604 | if (err) | ||
605 | goto fail5; | ||
606 | err = request_irq(mal->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal); | ||
607 | if (err) | ||
608 | goto fail6; | ||
609 | |||
610 | /* Enable all MAL SERR interrupt sources */ | ||
611 | if (mal->version == 2) | ||
612 | set_mal_dcrn(mal, MAL_IER, MAL2_IER_EVENTS); | ||
613 | else | ||
614 | set_mal_dcrn(mal, MAL_IER, MAL1_IER_EVENTS); | ||
615 | |||
616 | /* Enable EOB interrupt */ | ||
617 | mal_enable_eob_irq(mal); | ||
618 | |||
619 | printk(KERN_INFO | ||
620 | "MAL v%d %s, %d TX channels, %d RX channels\n", | ||
621 | mal->version, ofdev->node->full_name, | ||
622 | mal->num_tx_chans, mal->num_rx_chans); | ||
623 | |||
624 | /* Advertise this instance to the rest of the world */ | ||
625 | wmb(); | ||
626 | dev_set_drvdata(&ofdev->dev, mal); | ||
627 | |||
628 | mal_dbg_register(mal); | ||
629 | |||
630 | return 0; | ||
631 | |||
632 | fail6: | ||
633 | free_irq(mal->rxde_irq, mal); | ||
634 | fail5: | ||
635 | free_irq(mal->txeob_irq, mal); | ||
636 | fail4: | ||
637 | free_irq(mal->txde_irq, mal); | ||
638 | fail3: | ||
639 | free_irq(mal->serr_irq, mal); | ||
640 | fail2: | ||
641 | dma_free_coherent(&ofdev->dev, bd_size, mal->bd_virt, mal->bd_dma); | ||
642 | fail_unmap: | ||
643 | dcr_unmap(mal->dcr_host, mal->dcr_base, 0x100); | ||
644 | fail: | ||
645 | kfree(mal); | ||
646 | |||
647 | return err; | ||
648 | } | ||
649 | |||
650 | static int __devexit mal_remove(struct of_device *ofdev) | ||
651 | { | ||
652 | struct mal_instance *mal = dev_get_drvdata(&ofdev->dev); | ||
653 | |||
654 | MAL_DBG(mal, "remove" NL); | ||
655 | |||
656 | /* Syncronize with scheduled polling, | ||
657 | stolen from net/core/dev.c:dev_close() | ||
658 | */ | ||
659 | clear_bit(__LINK_STATE_START, &mal->poll_dev.state); | ||
660 | netif_poll_disable(&mal->poll_dev); | ||
661 | |||
662 | if (!list_empty(&mal->list)) { | ||
663 | /* This is *very* bad */ | ||
664 | printk(KERN_EMERG | ||
665 | "mal%d: commac list is not empty on remove!\n", | ||
666 | mal->index); | ||
667 | WARN_ON(1); | ||
668 | } | ||
669 | |||
670 | dev_set_drvdata(&ofdev->dev, NULL); | ||
671 | |||
672 | free_irq(mal->serr_irq, mal); | ||
673 | free_irq(mal->txde_irq, mal); | ||
674 | free_irq(mal->txeob_irq, mal); | ||
675 | free_irq(mal->rxde_irq, mal); | ||
676 | free_irq(mal->rxeob_irq, mal); | ||
677 | |||
678 | mal_reset(mal); | ||
679 | |||
680 | mal_dbg_unregister(mal); | ||
681 | |||
682 | dma_free_coherent(&ofdev->dev, | ||
683 | sizeof(struct mal_descriptor) * | ||
684 | (NUM_TX_BUFF * mal->num_tx_chans + | ||
685 | NUM_RX_BUFF * mal->num_rx_chans), mal->bd_virt, | ||
686 | mal->bd_dma); | ||
687 | kfree(mal); | ||
688 | |||
689 | return 0; | ||
690 | } | ||
691 | |||
692 | static struct of_device_id mal_platform_match[] = | ||
693 | { | ||
694 | { | ||
695 | .compatible = "ibm,mcmal", | ||
696 | }, | ||
697 | { | ||
698 | .compatible = "ibm,mcmal2", | ||
699 | }, | ||
700 | /* Backward compat */ | ||
701 | { | ||
702 | .type = "mcmal-dma", | ||
703 | .compatible = "ibm,mcmal", | ||
704 | }, | ||
705 | { | ||
706 | .type = "mcmal-dma", | ||
707 | .compatible = "ibm,mcmal2", | ||
708 | }, | ||
709 | {}, | ||
710 | }; | ||
711 | |||
712 | static struct of_platform_driver mal_of_driver = { | ||
713 | .name = "mcmal", | ||
714 | .match_table = mal_platform_match, | ||
715 | |||
716 | .probe = mal_probe, | ||
717 | .remove = mal_remove, | ||
718 | }; | ||
719 | |||
720 | int __init mal_init(void) | ||
721 | { | ||
722 | return of_register_platform_driver(&mal_of_driver); | ||
723 | } | ||
724 | |||
725 | void mal_exit(void) | ||
726 | { | ||
727 | of_unregister_platform_driver(&mal_of_driver); | ||
728 | } | ||
diff --git a/drivers/net/ibm_newemac/mal.h b/drivers/net/ibm_newemac/mal.h new file mode 100644 index 000000000000..57b69dc32e9d --- /dev/null +++ b/drivers/net/ibm_newemac/mal.h | |||
@@ -0,0 +1,276 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_newemac/mal.h | ||
3 | * | ||
4 | * Memory Access Layer (MAL) support | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Armin Kuster <akuster@mvista.com> | ||
11 | * Copyright 2002 MontaVista Softare Inc. | ||
12 | * | ||
13 | * This program is free software; you can redistribute it and/or modify it | ||
14 | * under the terms of the GNU General Public License as published by the | ||
15 | * Free Software Foundation; either version 2 of the License, or (at your | ||
16 | * option) any later version. | ||
17 | * | ||
18 | */ | ||
19 | #ifndef __IBM_NEWEMAC_MAL_H | ||
20 | #define __IBM_NEWEMAC_MAL_H | ||
21 | |||
22 | /* | ||
23 | * There are some variations on the MAL, we express them in this driver as | ||
24 | * MAL Version 1 and 2 though that doesn't match any IBM terminology. | ||
25 | * | ||
26 | * We call MAL 1 the version in 405GP, 405GPR, 405EP, 440EP, 440GR and | ||
27 | * NP405H. | ||
28 | * | ||
29 | * We call MAL 2 the version in 440GP, 440GX, 440SP, 440SPE and Axon | ||
30 | * | ||
31 | * The driver expects a "version" property in the emac node containing | ||
32 | * a number 1 or 2. New device-trees for EMAC capable platforms are thus | ||
33 | * required to include that when porting to arch/powerpc. | ||
34 | */ | ||
35 | |||
36 | /* MALx DCR registers */ | ||
37 | #define MAL_CFG 0x00 | ||
38 | #define MAL_CFG_SR 0x80000000 | ||
39 | #define MAL_CFG_PLBB 0x00004000 | ||
40 | #define MAL_CFG_OPBBL 0x00000080 | ||
41 | #define MAL_CFG_EOPIE 0x00000004 | ||
42 | #define MAL_CFG_LEA 0x00000002 | ||
43 | #define MAL_CFG_SD 0x00000001 | ||
44 | |||
45 | /* MAL V1 CFG bits */ | ||
46 | #define MAL1_CFG_PLBP_MASK 0x00c00000 | ||
47 | #define MAL1_CFG_PLBP_10 0x00800000 | ||
48 | #define MAL1_CFG_GA 0x00200000 | ||
49 | #define MAL1_CFG_OA 0x00100000 | ||
50 | #define MAL1_CFG_PLBLE 0x00080000 | ||
51 | #define MAL1_CFG_PLBT_MASK 0x00078000 | ||
52 | #define MAL1_CFG_DEFAULT (MAL1_CFG_PLBP_10 | MAL1_CFG_PLBT_MASK) | ||
53 | |||
54 | /* MAL V2 CFG bits */ | ||
55 | #define MAL2_CFG_RPP_MASK 0x00c00000 | ||
56 | #define MAL2_CFG_RPP_10 0x00800000 | ||
57 | #define MAL2_CFG_RMBS_MASK 0x00300000 | ||
58 | #define MAL2_CFG_WPP_MASK 0x000c0000 | ||
59 | #define MAL2_CFG_WPP_10 0x00080000 | ||
60 | #define MAL2_CFG_WMBS_MASK 0x00030000 | ||
61 | #define MAL2_CFG_PLBLE 0x00008000 | ||
62 | #define MAL2_CFG_DEFAULT (MAL2_CFG_RMBS_MASK | MAL2_CFG_WMBS_MASK | \ | ||
63 | MAL2_CFG_RPP_10 | MAL2_CFG_WPP_10) | ||
64 | |||
65 | #define MAL_ESR 0x01 | ||
66 | #define MAL_ESR_EVB 0x80000000 | ||
67 | #define MAL_ESR_CIDT 0x40000000 | ||
68 | #define MAL_ESR_CID_MASK 0x3e000000 | ||
69 | #define MAL_ESR_CID_SHIFT 25 | ||
70 | #define MAL_ESR_DE 0x00100000 | ||
71 | #define MAL_ESR_OTE 0x00040000 | ||
72 | #define MAL_ESR_OSE 0x00020000 | ||
73 | #define MAL_ESR_PEIN 0x00010000 | ||
74 | #define MAL_ESR_DEI 0x00000010 | ||
75 | #define MAL_ESR_OTEI 0x00000004 | ||
76 | #define MAL_ESR_OSEI 0x00000002 | ||
77 | #define MAL_ESR_PBEI 0x00000001 | ||
78 | |||
79 | /* MAL V1 ESR bits */ | ||
80 | #define MAL1_ESR_ONE 0x00080000 | ||
81 | #define MAL1_ESR_ONEI 0x00000008 | ||
82 | |||
83 | /* MAL V2 ESR bits */ | ||
84 | #define MAL2_ESR_PTE 0x00800000 | ||
85 | #define MAL2_ESR_PRE 0x00400000 | ||
86 | #define MAL2_ESR_PWE 0x00200000 | ||
87 | #define MAL2_ESR_PTEI 0x00000080 | ||
88 | #define MAL2_ESR_PREI 0x00000040 | ||
89 | #define MAL2_ESR_PWEI 0x00000020 | ||
90 | |||
91 | |||
92 | #define MAL_IER 0x02 | ||
93 | #define MAL_IER_DE 0x00000010 | ||
94 | #define MAL_IER_OTE 0x00000004 | ||
95 | #define MAL_IER_OE 0x00000002 | ||
96 | #define MAL_IER_PE 0x00000001 | ||
97 | /* MAL V1 IER bits */ | ||
98 | #define MAL1_IER_NWE 0x00000008 | ||
99 | #define MAL1_IER_SOC_EVENTS MAL1_IER_NWE | ||
100 | #define MAL1_IER_EVENTS (MAL1_IER_SOC_EVENTS | MAL_IER_OTE | \ | ||
101 | MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE) | ||
102 | |||
103 | /* MAL V2 IER bits */ | ||
104 | #define MAL2_IER_PT 0x00000080 | ||
105 | #define MAL2_IER_PRE 0x00000040 | ||
106 | #define MAL2_IER_PWE 0x00000020 | ||
107 | #define MAL2_IER_SOC_EVENTS (MAL2_IER_PT | MAL2_IER_PRE | MAL2_IER_PWE) | ||
108 | #define MAL2_IER_EVENTS (MAL2_IER_SOC_EVENTS | MAL_IER_OTE | \ | ||
109 | MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE) | ||
110 | |||
111 | |||
112 | #define MAL_TXCASR 0x04 | ||
113 | #define MAL_TXCARR 0x05 | ||
114 | #define MAL_TXEOBISR 0x06 | ||
115 | #define MAL_TXDEIR 0x07 | ||
116 | #define MAL_RXCASR 0x10 | ||
117 | #define MAL_RXCARR 0x11 | ||
118 | #define MAL_RXEOBISR 0x12 | ||
119 | #define MAL_RXDEIR 0x13 | ||
120 | #define MAL_TXCTPR(n) ((n) + 0x20) | ||
121 | #define MAL_RXCTPR(n) ((n) + 0x40) | ||
122 | #define MAL_RCBS(n) ((n) + 0x60) | ||
123 | |||
124 | /* In reality MAL can handle TX buffers up to 4095 bytes long, | ||
125 | * but this isn't a good round number :) --ebs | ||
126 | */ | ||
127 | #define MAL_MAX_TX_SIZE 4080 | ||
128 | #define MAL_MAX_RX_SIZE 4080 | ||
129 | |||
130 | static inline int mal_rx_size(int len) | ||
131 | { | ||
132 | len = (len + 0xf) & ~0xf; | ||
133 | return len > MAL_MAX_RX_SIZE ? MAL_MAX_RX_SIZE : len; | ||
134 | } | ||
135 | |||
136 | static inline int mal_tx_chunks(int len) | ||
137 | { | ||
138 | return (len + MAL_MAX_TX_SIZE - 1) / MAL_MAX_TX_SIZE; | ||
139 | } | ||
140 | |||
141 | #define MAL_CHAN_MASK(n) (0x80000000 >> (n)) | ||
142 | |||
143 | /* MAL Buffer Descriptor structure */ | ||
144 | struct mal_descriptor { | ||
145 | u16 ctrl; /* MAL / Commac status control bits */ | ||
146 | u16 data_len; /* Max length is 4K-1 (12 bits) */ | ||
147 | u32 data_ptr; /* pointer to actual data buffer */ | ||
148 | }; | ||
149 | |||
150 | /* the following defines are for the MadMAL status and control registers. */ | ||
151 | /* MADMAL transmit and receive status/control bits */ | ||
152 | #define MAL_RX_CTRL_EMPTY 0x8000 | ||
153 | #define MAL_RX_CTRL_WRAP 0x4000 | ||
154 | #define MAL_RX_CTRL_CM 0x2000 | ||
155 | #define MAL_RX_CTRL_LAST 0x1000 | ||
156 | #define MAL_RX_CTRL_FIRST 0x0800 | ||
157 | #define MAL_RX_CTRL_INTR 0x0400 | ||
158 | #define MAL_RX_CTRL_SINGLE (MAL_RX_CTRL_LAST | MAL_RX_CTRL_FIRST) | ||
159 | #define MAL_IS_SINGLE_RX(ctrl) (((ctrl) & MAL_RX_CTRL_SINGLE) == MAL_RX_CTRL_SINGLE) | ||
160 | |||
161 | #define MAL_TX_CTRL_READY 0x8000 | ||
162 | #define MAL_TX_CTRL_WRAP 0x4000 | ||
163 | #define MAL_TX_CTRL_CM 0x2000 | ||
164 | #define MAL_TX_CTRL_LAST 0x1000 | ||
165 | #define MAL_TX_CTRL_INTR 0x0400 | ||
166 | |||
167 | struct mal_commac_ops { | ||
168 | void (*poll_tx) (void *dev); | ||
169 | int (*poll_rx) (void *dev, int budget); | ||
170 | int (*peek_rx) (void *dev); | ||
171 | void (*rxde) (void *dev); | ||
172 | }; | ||
173 | |||
174 | struct mal_commac { | ||
175 | struct mal_commac_ops *ops; | ||
176 | void *dev; | ||
177 | struct list_head poll_list; | ||
178 | long flags; | ||
179 | #define MAL_COMMAC_RX_STOPPED 0 | ||
180 | #define MAL_COMMAC_POLL_DISABLED 1 | ||
181 | u32 tx_chan_mask; | ||
182 | u32 rx_chan_mask; | ||
183 | struct list_head list; | ||
184 | }; | ||
185 | |||
186 | struct mal_instance { | ||
187 | int version; | ||
188 | int dcr_base; | ||
189 | dcr_host_t dcr_host; | ||
190 | |||
191 | int num_tx_chans; /* Number of TX channels */ | ||
192 | int num_rx_chans; /* Number of RX channels */ | ||
193 | int txeob_irq; /* TX End Of Buffer IRQ */ | ||
194 | int rxeob_irq; /* RX End Of Buffer IRQ */ | ||
195 | int txde_irq; /* TX Descriptor Error IRQ */ | ||
196 | int rxde_irq; /* RX Descriptor Error IRQ */ | ||
197 | int serr_irq; /* MAL System Error IRQ */ | ||
198 | |||
199 | struct list_head poll_list; | ||
200 | struct net_device poll_dev; | ||
201 | |||
202 | struct list_head list; | ||
203 | u32 tx_chan_mask; | ||
204 | u32 rx_chan_mask; | ||
205 | |||
206 | dma_addr_t bd_dma; | ||
207 | struct mal_descriptor *bd_virt; | ||
208 | |||
209 | struct of_device *ofdev; | ||
210 | int index; | ||
211 | spinlock_t lock; | ||
212 | }; | ||
213 | |||
214 | static inline u32 get_mal_dcrn(struct mal_instance *mal, int reg) | ||
215 | { | ||
216 | return dcr_read(mal->dcr_host, mal->dcr_base + reg); | ||
217 | } | ||
218 | |||
219 | static inline void set_mal_dcrn(struct mal_instance *mal, int reg, u32 val) | ||
220 | { | ||
221 | dcr_write(mal->dcr_host, mal->dcr_base + reg, val); | ||
222 | } | ||
223 | |||
224 | /* Register MAL devices */ | ||
225 | int mal_init(void); | ||
226 | void mal_exit(void); | ||
227 | |||
228 | int mal_register_commac(struct mal_instance *mal, | ||
229 | struct mal_commac *commac); | ||
230 | void mal_unregister_commac(struct mal_instance *mal, | ||
231 | struct mal_commac *commac); | ||
232 | int mal_set_rcbs(struct mal_instance *mal, int channel, unsigned long size); | ||
233 | |||
234 | /* Returns BD ring offset for a particular channel | ||
235 | (in 'struct mal_descriptor' elements) | ||
236 | */ | ||
237 | int mal_tx_bd_offset(struct mal_instance *mal, int channel); | ||
238 | int mal_rx_bd_offset(struct mal_instance *mal, int channel); | ||
239 | |||
240 | void mal_enable_tx_channel(struct mal_instance *mal, int channel); | ||
241 | void mal_disable_tx_channel(struct mal_instance *mal, int channel); | ||
242 | void mal_enable_rx_channel(struct mal_instance *mal, int channel); | ||
243 | void mal_disable_rx_channel(struct mal_instance *mal, int channel); | ||
244 | |||
245 | void mal_poll_disable(struct mal_instance *mal, struct mal_commac *commac); | ||
246 | void mal_poll_enable(struct mal_instance *mal, struct mal_commac *commac); | ||
247 | |||
248 | /* Add/remove EMAC to/from MAL polling list */ | ||
249 | void mal_poll_add(struct mal_instance *mal, struct mal_commac *commac); | ||
250 | void mal_poll_del(struct mal_instance *mal, struct mal_commac *commac); | ||
251 | |||
252 | /* Ethtool MAL registers */ | ||
253 | struct mal_regs { | ||
254 | u32 tx_count; | ||
255 | u32 rx_count; | ||
256 | |||
257 | u32 cfg; | ||
258 | u32 esr; | ||
259 | u32 ier; | ||
260 | u32 tx_casr; | ||
261 | u32 tx_carr; | ||
262 | u32 tx_eobisr; | ||
263 | u32 tx_deir; | ||
264 | u32 rx_casr; | ||
265 | u32 rx_carr; | ||
266 | u32 rx_eobisr; | ||
267 | u32 rx_deir; | ||
268 | u32 tx_ctpr[32]; | ||
269 | u32 rx_ctpr[32]; | ||
270 | u32 rcbs[32]; | ||
271 | }; | ||
272 | |||
273 | int mal_get_regs_len(struct mal_instance *mal); | ||
274 | void *mal_dump_regs(struct mal_instance *mal, void *buf); | ||
275 | |||
276 | #endif /* __IBM_NEWEMAC_MAL_H */ | ||
diff --git a/drivers/net/ibm_newemac/phy.c b/drivers/net/ibm_newemac/phy.c new file mode 100644 index 000000000000..aa1f0ddf1e3e --- /dev/null +++ b/drivers/net/ibm_newemac/phy.c | |||
@@ -0,0 +1,373 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_newemac/phy.c | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, PHY support. | ||
5 | * Borrowed from sungem_phy.c, though I only kept the generic MII | ||
6 | * driver for now. | ||
7 | * | ||
8 | * This file should be shared with other drivers or eventually | ||
9 | * merged as the "low level" part of miilib | ||
10 | * | ||
11 | * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org) | ||
12 | * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net> | ||
13 | * | ||
14 | */ | ||
15 | #include <linux/module.h> | ||
16 | #include <linux/kernel.h> | ||
17 | #include <linux/types.h> | ||
18 | #include <linux/netdevice.h> | ||
19 | #include <linux/mii.h> | ||
20 | #include <linux/ethtool.h> | ||
21 | #include <linux/delay.h> | ||
22 | |||
23 | #include "emac.h" | ||
24 | #include "phy.h" | ||
25 | |||
26 | static inline int phy_read(struct mii_phy *phy, int reg) | ||
27 | { | ||
28 | return phy->mdio_read(phy->dev, phy->address, reg); | ||
29 | } | ||
30 | |||
31 | static inline void phy_write(struct mii_phy *phy, int reg, int val) | ||
32 | { | ||
33 | phy->mdio_write(phy->dev, phy->address, reg, val); | ||
34 | } | ||
35 | |||
36 | int emac_mii_reset_phy(struct mii_phy *phy) | ||
37 | { | ||
38 | int val; | ||
39 | int limit = 10000; | ||
40 | |||
41 | val = phy_read(phy, MII_BMCR); | ||
42 | val &= ~(BMCR_ISOLATE | BMCR_ANENABLE); | ||
43 | val |= BMCR_RESET; | ||
44 | phy_write(phy, MII_BMCR, val); | ||
45 | |||
46 | udelay(300); | ||
47 | |||
48 | while (limit--) { | ||
49 | val = phy_read(phy, MII_BMCR); | ||
50 | if (val >= 0 && (val & BMCR_RESET) == 0) | ||
51 | break; | ||
52 | udelay(10); | ||
53 | } | ||
54 | if ((val & BMCR_ISOLATE) && limit > 0) | ||
55 | phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE); | ||
56 | |||
57 | return limit <= 0; | ||
58 | } | ||
59 | |||
60 | static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) | ||
61 | { | ||
62 | int ctl, adv; | ||
63 | |||
64 | phy->autoneg = AUTONEG_ENABLE; | ||
65 | phy->speed = SPEED_10; | ||
66 | phy->duplex = DUPLEX_HALF; | ||
67 | phy->pause = phy->asym_pause = 0; | ||
68 | phy->advertising = advertise; | ||
69 | |||
70 | ctl = phy_read(phy, MII_BMCR); | ||
71 | if (ctl < 0) | ||
72 | return ctl; | ||
73 | ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); | ||
74 | |||
75 | /* First clear the PHY */ | ||
76 | phy_write(phy, MII_BMCR, ctl); | ||
77 | |||
78 | /* Setup standard advertise */ | ||
79 | adv = phy_read(phy, MII_ADVERTISE); | ||
80 | if (adv < 0) | ||
81 | return adv; | ||
82 | adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | | ||
83 | ADVERTISE_PAUSE_ASYM); | ||
84 | if (advertise & ADVERTISED_10baseT_Half) | ||
85 | adv |= ADVERTISE_10HALF; | ||
86 | if (advertise & ADVERTISED_10baseT_Full) | ||
87 | adv |= ADVERTISE_10FULL; | ||
88 | if (advertise & ADVERTISED_100baseT_Half) | ||
89 | adv |= ADVERTISE_100HALF; | ||
90 | if (advertise & ADVERTISED_100baseT_Full) | ||
91 | adv |= ADVERTISE_100FULL; | ||
92 | if (advertise & ADVERTISED_Pause) | ||
93 | adv |= ADVERTISE_PAUSE_CAP; | ||
94 | if (advertise & ADVERTISED_Asym_Pause) | ||
95 | adv |= ADVERTISE_PAUSE_ASYM; | ||
96 | phy_write(phy, MII_ADVERTISE, adv); | ||
97 | |||
98 | if (phy->features & | ||
99 | (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) { | ||
100 | adv = phy_read(phy, MII_CTRL1000); | ||
101 | if (adv < 0) | ||
102 | return adv; | ||
103 | adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); | ||
104 | if (advertise & ADVERTISED_1000baseT_Full) | ||
105 | adv |= ADVERTISE_1000FULL; | ||
106 | if (advertise & ADVERTISED_1000baseT_Half) | ||
107 | adv |= ADVERTISE_1000HALF; | ||
108 | phy_write(phy, MII_CTRL1000, adv); | ||
109 | } | ||
110 | |||
111 | /* Start/Restart aneg */ | ||
112 | ctl = phy_read(phy, MII_BMCR); | ||
113 | ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); | ||
114 | phy_write(phy, MII_BMCR, ctl); | ||
115 | |||
116 | return 0; | ||
117 | } | ||
118 | |||
119 | static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) | ||
120 | { | ||
121 | int ctl; | ||
122 | |||
123 | phy->autoneg = AUTONEG_DISABLE; | ||
124 | phy->speed = speed; | ||
125 | phy->duplex = fd; | ||
126 | phy->pause = phy->asym_pause = 0; | ||
127 | |||
128 | ctl = phy_read(phy, MII_BMCR); | ||
129 | if (ctl < 0) | ||
130 | return ctl; | ||
131 | ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); | ||
132 | |||
133 | /* First clear the PHY */ | ||
134 | phy_write(phy, MII_BMCR, ctl | BMCR_RESET); | ||
135 | |||
136 | /* Select speed & duplex */ | ||
137 | switch (speed) { | ||
138 | case SPEED_10: | ||
139 | break; | ||
140 | case SPEED_100: | ||
141 | ctl |= BMCR_SPEED100; | ||
142 | break; | ||
143 | case SPEED_1000: | ||
144 | ctl |= BMCR_SPEED1000; | ||
145 | break; | ||
146 | default: | ||
147 | return -EINVAL; | ||
148 | } | ||
149 | if (fd == DUPLEX_FULL) | ||
150 | ctl |= BMCR_FULLDPLX; | ||
151 | phy_write(phy, MII_BMCR, ctl); | ||
152 | |||
153 | return 0; | ||
154 | } | ||
155 | |||
156 | static int genmii_poll_link(struct mii_phy *phy) | ||
157 | { | ||
158 | int status; | ||
159 | |||
160 | /* Clear latched value with dummy read */ | ||
161 | phy_read(phy, MII_BMSR); | ||
162 | status = phy_read(phy, MII_BMSR); | ||
163 | if (status < 0 || (status & BMSR_LSTATUS) == 0) | ||
164 | return 0; | ||
165 | if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE)) | ||
166 | return 0; | ||
167 | return 1; | ||
168 | } | ||
169 | |||
170 | static int genmii_read_link(struct mii_phy *phy) | ||
171 | { | ||
172 | if (phy->autoneg == AUTONEG_ENABLE) { | ||
173 | int glpa = 0; | ||
174 | int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE); | ||
175 | if (lpa < 0) | ||
176 | return lpa; | ||
177 | |||
178 | if (phy->features & | ||
179 | (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) { | ||
180 | int adv = phy_read(phy, MII_CTRL1000); | ||
181 | glpa = phy_read(phy, MII_STAT1000); | ||
182 | |||
183 | if (glpa < 0 || adv < 0) | ||
184 | return adv; | ||
185 | |||
186 | glpa &= adv << 2; | ||
187 | } | ||
188 | |||
189 | phy->speed = SPEED_10; | ||
190 | phy->duplex = DUPLEX_HALF; | ||
191 | phy->pause = phy->asym_pause = 0; | ||
192 | |||
193 | if (glpa & (LPA_1000FULL | LPA_1000HALF)) { | ||
194 | phy->speed = SPEED_1000; | ||
195 | if (glpa & LPA_1000FULL) | ||
196 | phy->duplex = DUPLEX_FULL; | ||
197 | } else if (lpa & (LPA_100FULL | LPA_100HALF)) { | ||
198 | phy->speed = SPEED_100; | ||
199 | if (lpa & LPA_100FULL) | ||
200 | phy->duplex = DUPLEX_FULL; | ||
201 | } else if (lpa & LPA_10FULL) | ||
202 | phy->duplex = DUPLEX_FULL; | ||
203 | |||
204 | if (phy->duplex == DUPLEX_FULL) { | ||
205 | phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; | ||
206 | phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; | ||
207 | } | ||
208 | } else { | ||
209 | int bmcr = phy_read(phy, MII_BMCR); | ||
210 | if (bmcr < 0) | ||
211 | return bmcr; | ||
212 | |||
213 | if (bmcr & BMCR_FULLDPLX) | ||
214 | phy->duplex = DUPLEX_FULL; | ||
215 | else | ||
216 | phy->duplex = DUPLEX_HALF; | ||
217 | if (bmcr & BMCR_SPEED1000) | ||
218 | phy->speed = SPEED_1000; | ||
219 | else if (bmcr & BMCR_SPEED100) | ||
220 | phy->speed = SPEED_100; | ||
221 | else | ||
222 | phy->speed = SPEED_10; | ||
223 | |||
224 | phy->pause = phy->asym_pause = 0; | ||
225 | } | ||
226 | return 0; | ||
227 | } | ||
228 | |||
229 | /* Generic implementation for most 10/100/1000 PHYs */ | ||
230 | static struct mii_phy_ops generic_phy_ops = { | ||
231 | .setup_aneg = genmii_setup_aneg, | ||
232 | .setup_forced = genmii_setup_forced, | ||
233 | .poll_link = genmii_poll_link, | ||
234 | .read_link = genmii_read_link | ||
235 | }; | ||
236 | |||
237 | static struct mii_phy_def genmii_phy_def = { | ||
238 | .phy_id = 0x00000000, | ||
239 | .phy_id_mask = 0x00000000, | ||
240 | .name = "Generic MII", | ||
241 | .ops = &generic_phy_ops | ||
242 | }; | ||
243 | |||
244 | /* CIS8201 */ | ||
245 | #define MII_CIS8201_10BTCSR 0x16 | ||
246 | #define TENBTCSR_ECHO_DISABLE 0x2000 | ||
247 | #define MII_CIS8201_EPCR 0x17 | ||
248 | #define EPCR_MODE_MASK 0x3000 | ||
249 | #define EPCR_GMII_MODE 0x0000 | ||
250 | #define EPCR_RGMII_MODE 0x1000 | ||
251 | #define EPCR_TBI_MODE 0x2000 | ||
252 | #define EPCR_RTBI_MODE 0x3000 | ||
253 | #define MII_CIS8201_ACSR 0x1c | ||
254 | #define ACSR_PIN_PRIO_SELECT 0x0004 | ||
255 | |||
256 | static int cis8201_init(struct mii_phy *phy) | ||
257 | { | ||
258 | int epcr; | ||
259 | |||
260 | epcr = phy_read(phy, MII_CIS8201_EPCR); | ||
261 | if (epcr < 0) | ||
262 | return epcr; | ||
263 | |||
264 | epcr &= ~EPCR_MODE_MASK; | ||
265 | |||
266 | switch (phy->mode) { | ||
267 | case PHY_MODE_TBI: | ||
268 | epcr |= EPCR_TBI_MODE; | ||
269 | break; | ||
270 | case PHY_MODE_RTBI: | ||
271 | epcr |= EPCR_RTBI_MODE; | ||
272 | break; | ||
273 | case PHY_MODE_GMII: | ||
274 | epcr |= EPCR_GMII_MODE; | ||
275 | break; | ||
276 | case PHY_MODE_RGMII: | ||
277 | default: | ||
278 | epcr |= EPCR_RGMII_MODE; | ||
279 | } | ||
280 | |||
281 | phy_write(phy, MII_CIS8201_EPCR, epcr); | ||
282 | |||
283 | /* MII regs override strap pins */ | ||
284 | phy_write(phy, MII_CIS8201_ACSR, | ||
285 | phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT); | ||
286 | |||
287 | /* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */ | ||
288 | phy_write(phy, MII_CIS8201_10BTCSR, | ||
289 | phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE); | ||
290 | |||
291 | return 0; | ||
292 | } | ||
293 | |||
294 | static struct mii_phy_ops cis8201_phy_ops = { | ||
295 | .init = cis8201_init, | ||
296 | .setup_aneg = genmii_setup_aneg, | ||
297 | .setup_forced = genmii_setup_forced, | ||
298 | .poll_link = genmii_poll_link, | ||
299 | .read_link = genmii_read_link | ||
300 | }; | ||
301 | |||
302 | static struct mii_phy_def cis8201_phy_def = { | ||
303 | .phy_id = 0x000fc410, | ||
304 | .phy_id_mask = 0x000ffff0, | ||
305 | .name = "CIS8201 Gigabit Ethernet", | ||
306 | .ops = &cis8201_phy_ops | ||
307 | }; | ||
308 | |||
309 | static struct mii_phy_def *mii_phy_table[] = { | ||
310 | &cis8201_phy_def, | ||
311 | &genmii_phy_def, | ||
312 | NULL | ||
313 | }; | ||
314 | |||
315 | int emac_mii_phy_probe(struct mii_phy *phy, int address) | ||
316 | { | ||
317 | struct mii_phy_def *def; | ||
318 | int i; | ||
319 | u32 id; | ||
320 | |||
321 | phy->autoneg = AUTONEG_DISABLE; | ||
322 | phy->advertising = 0; | ||
323 | phy->address = address; | ||
324 | phy->speed = SPEED_10; | ||
325 | phy->duplex = DUPLEX_HALF; | ||
326 | phy->pause = phy->asym_pause = 0; | ||
327 | |||
328 | /* Take PHY out of isolate mode and reset it. */ | ||
329 | if (emac_mii_reset_phy(phy)) | ||
330 | return -ENODEV; | ||
331 | |||
332 | /* Read ID and find matching entry */ | ||
333 | id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2); | ||
334 | for (i = 0; (def = mii_phy_table[i]) != NULL; i++) | ||
335 | if ((id & def->phy_id_mask) == def->phy_id) | ||
336 | break; | ||
337 | /* Should never be NULL (we have a generic entry), but... */ | ||
338 | if (!def) | ||
339 | return -ENODEV; | ||
340 | |||
341 | phy->def = def; | ||
342 | |||
343 | /* Determine PHY features if needed */ | ||
344 | phy->features = def->features; | ||
345 | if (!phy->features) { | ||
346 | u16 bmsr = phy_read(phy, MII_BMSR); | ||
347 | if (bmsr & BMSR_ANEGCAPABLE) | ||
348 | phy->features |= SUPPORTED_Autoneg; | ||
349 | if (bmsr & BMSR_10HALF) | ||
350 | phy->features |= SUPPORTED_10baseT_Half; | ||
351 | if (bmsr & BMSR_10FULL) | ||
352 | phy->features |= SUPPORTED_10baseT_Full; | ||
353 | if (bmsr & BMSR_100HALF) | ||
354 | phy->features |= SUPPORTED_100baseT_Half; | ||
355 | if (bmsr & BMSR_100FULL) | ||
356 | phy->features |= SUPPORTED_100baseT_Full; | ||
357 | if (bmsr & BMSR_ESTATEN) { | ||
358 | u16 esr = phy_read(phy, MII_ESTATUS); | ||
359 | if (esr & ESTATUS_1000_TFULL) | ||
360 | phy->features |= SUPPORTED_1000baseT_Full; | ||
361 | if (esr & ESTATUS_1000_THALF) | ||
362 | phy->features |= SUPPORTED_1000baseT_Half; | ||
363 | } | ||
364 | phy->features |= SUPPORTED_MII; | ||
365 | } | ||
366 | |||
367 | /* Setup default advertising */ | ||
368 | phy->advertising = phy->features; | ||
369 | |||
370 | return 0; | ||
371 | } | ||
372 | |||
373 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/net/ibm_newemac/phy.h b/drivers/net/ibm_newemac/phy.h new file mode 100644 index 000000000000..6feca26afedb --- /dev/null +++ b/drivers/net/ibm_newemac/phy.h | |||
@@ -0,0 +1,80 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_newemac/phy.h | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, PHY support | ||
5 | * | ||
6 | * Benjamin Herrenschmidt <benh@kernel.crashing.org> | ||
7 | * February 2003 | ||
8 | * | ||
9 | * Minor additions by Eugene Surovegin <ebs@ebshome.net>, 2004 | ||
10 | * | ||
11 | * This program is free software; you can redistribute it and/or modify it | ||
12 | * under the terms of the GNU General Public License as published by the | ||
13 | * Free Software Foundation; either version 2 of the License, or (at your | ||
14 | * option) any later version. | ||
15 | * | ||
16 | * This file basically duplicates sungem_phy.{c,h} with different PHYs | ||
17 | * supported. I'm looking into merging that in a single mii layer more | ||
18 | * flexible than mii.c | ||
19 | */ | ||
20 | |||
21 | #ifndef __IBM_NEWEMAC_PHY_H | ||
22 | #define __IBM_NEWEMAC_PHY_H | ||
23 | |||
24 | struct mii_phy; | ||
25 | |||
26 | /* Operations supported by any kind of PHY */ | ||
27 | struct mii_phy_ops { | ||
28 | int (*init) (struct mii_phy * phy); | ||
29 | int (*suspend) (struct mii_phy * phy, int wol_options); | ||
30 | int (*setup_aneg) (struct mii_phy * phy, u32 advertise); | ||
31 | int (*setup_forced) (struct mii_phy * phy, int speed, int fd); | ||
32 | int (*poll_link) (struct mii_phy * phy); | ||
33 | int (*read_link) (struct mii_phy * phy); | ||
34 | }; | ||
35 | |||
36 | /* Structure used to statically define an mii/gii based PHY */ | ||
37 | struct mii_phy_def { | ||
38 | u32 phy_id; /* Concatenated ID1 << 16 | ID2 */ | ||
39 | u32 phy_id_mask; /* Significant bits */ | ||
40 | u32 features; /* Ethtool SUPPORTED_* defines or | ||
41 | 0 for autodetect */ | ||
42 | int magic_aneg; /* Autoneg does all speed test for us */ | ||
43 | const char *name; | ||
44 | const struct mii_phy_ops *ops; | ||
45 | }; | ||
46 | |||
47 | /* An instance of a PHY, partially borrowed from mii_if_info */ | ||
48 | struct mii_phy { | ||
49 | struct mii_phy_def *def; | ||
50 | u32 advertising; /* Ethtool ADVERTISED_* defines */ | ||
51 | u32 features; /* Copied from mii_phy_def.features | ||
52 | or determined automaticaly */ | ||
53 | int address; /* PHY address */ | ||
54 | int mode; /* PHY mode */ | ||
55 | |||
56 | /* 1: autoneg enabled, 0: disabled */ | ||
57 | int autoneg; | ||
58 | |||
59 | /* forced speed & duplex (no autoneg) | ||
60 | * partner speed & duplex & pause (autoneg) | ||
61 | */ | ||
62 | int speed; | ||
63 | int duplex; | ||
64 | int pause; | ||
65 | int asym_pause; | ||
66 | |||
67 | /* Provided by host chip */ | ||
68 | struct net_device *dev; | ||
69 | int (*mdio_read) (struct net_device * dev, int addr, int reg); | ||
70 | void (*mdio_write) (struct net_device * dev, int addr, int reg, | ||
71 | int val); | ||
72 | }; | ||
73 | |||
74 | /* Pass in a struct mii_phy with dev, mdio_read and mdio_write | ||
75 | * filled, the remaining fields will be filled on return | ||
76 | */ | ||
77 | int emac_mii_phy_probe(struct mii_phy *phy, int address); | ||
78 | int emac_mii_reset_phy(struct mii_phy *phy); | ||
79 | |||
80 | #endif /* __IBM_NEWEMAC_PHY_H */ | ||
diff --git a/drivers/net/ibm_newemac/rgmii.c b/drivers/net/ibm_newemac/rgmii.c new file mode 100644 index 000000000000..bcd7fc639c40 --- /dev/null +++ b/drivers/net/ibm_newemac/rgmii.c | |||
@@ -0,0 +1,323 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_newemac/rgmii.c | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support. | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Matt Porter <mporter@kernel.crashing.org> | ||
11 | * Copyright 2004 MontaVista Software, Inc. | ||
12 | * | ||
13 | * This program is free software; you can redistribute it and/or modify it | ||
14 | * under the terms of the GNU General Public License as published by the | ||
15 | * Free Software Foundation; either version 2 of the License, or (at your | ||
16 | * option) any later version. | ||
17 | * | ||
18 | */ | ||
19 | #include <linux/kernel.h> | ||
20 | #include <linux/ethtool.h> | ||
21 | #include <asm/io.h> | ||
22 | |||
23 | #include "emac.h" | ||
24 | #include "debug.h" | ||
25 | |||
26 | // XXX FIXME: Axon seems to support a subset of the RGMII, we | ||
27 | // thus need to take that into account and possibly change some | ||
28 | // of the bit settings below that don't seem to quite match the | ||
29 | // AXON spec | ||
30 | |||
31 | /* RGMIIx_FER */ | ||
32 | #define RGMII_FER_MASK(idx) (0x7 << ((idx) * 4)) | ||
33 | #define RGMII_FER_RTBI(idx) (0x4 << ((idx) * 4)) | ||
34 | #define RGMII_FER_RGMII(idx) (0x5 << ((idx) * 4)) | ||
35 | #define RGMII_FER_TBI(idx) (0x6 << ((idx) * 4)) | ||
36 | #define RGMII_FER_GMII(idx) (0x7 << ((idx) * 4)) | ||
37 | |||
38 | /* RGMIIx_SSR */ | ||
39 | #define RGMII_SSR_MASK(idx) (0x7 << ((idx) * 8)) | ||
40 | #define RGMII_SSR_100(idx) (0x2 << ((idx) * 8)) | ||
41 | #define RGMII_SSR_1000(idx) (0x4 << ((idx) * 8)) | ||
42 | |||
43 | /* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */ | ||
44 | static inline int rgmii_valid_mode(int phy_mode) | ||
45 | { | ||
46 | return phy_mode == PHY_MODE_GMII || | ||
47 | phy_mode == PHY_MODE_RGMII || | ||
48 | phy_mode == PHY_MODE_TBI || | ||
49 | phy_mode == PHY_MODE_RTBI; | ||
50 | } | ||
51 | |||
52 | static inline const char *rgmii_mode_name(int mode) | ||
53 | { | ||
54 | switch (mode) { | ||
55 | case PHY_MODE_RGMII: | ||
56 | return "RGMII"; | ||
57 | case PHY_MODE_TBI: | ||
58 | return "TBI"; | ||
59 | case PHY_MODE_GMII: | ||
60 | return "GMII"; | ||
61 | case PHY_MODE_RTBI: | ||
62 | return "RTBI"; | ||
63 | default: | ||
64 | BUG(); | ||
65 | } | ||
66 | } | ||
67 | |||
68 | static inline u32 rgmii_mode_mask(int mode, int input) | ||
69 | { | ||
70 | switch (mode) { | ||
71 | case PHY_MODE_RGMII: | ||
72 | return RGMII_FER_RGMII(input); | ||
73 | case PHY_MODE_TBI: | ||
74 | return RGMII_FER_TBI(input); | ||
75 | case PHY_MODE_GMII: | ||
76 | return RGMII_FER_GMII(input); | ||
77 | case PHY_MODE_RTBI: | ||
78 | return RGMII_FER_RTBI(input); | ||
79 | default: | ||
80 | BUG(); | ||
81 | } | ||
82 | } | ||
83 | |||
84 | int __devinit rgmii_attach(struct of_device *ofdev, int input, int mode) | ||
85 | { | ||
86 | struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
87 | struct rgmii_regs *p = dev->base; | ||
88 | |||
89 | RGMII_DBG(dev, "attach(%d)" NL, input); | ||
90 | |||
91 | /* Check if we need to attach to a RGMII */ | ||
92 | if (input < 0 || !rgmii_valid_mode(mode)) { | ||
93 | printk(KERN_ERR "%s: unsupported settings !\n", | ||
94 | ofdev->node->full_name); | ||
95 | return -ENODEV; | ||
96 | } | ||
97 | |||
98 | mutex_lock(&dev->lock); | ||
99 | |||
100 | /* Enable this input */ | ||
101 | out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input)); | ||
102 | |||
103 | printk(KERN_NOTICE "%s: input %d in %s mode\n", | ||
104 | ofdev->node->full_name, input, rgmii_mode_name(mode)); | ||
105 | |||
106 | ++dev->users; | ||
107 | |||
108 | mutex_unlock(&dev->lock); | ||
109 | |||
110 | return 0; | ||
111 | } | ||
112 | |||
113 | void rgmii_set_speed(struct of_device *ofdev, int input, int speed) | ||
114 | { | ||
115 | struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
116 | struct rgmii_regs *p = dev->base; | ||
117 | u32 ssr; | ||
118 | |||
119 | mutex_lock(&dev->lock); | ||
120 | |||
121 | ssr = in_be32(&p->ssr) & ~RGMII_SSR_MASK(input); | ||
122 | |||
123 | RGMII_DBG(dev, "speed(%d, %d)" NL, input, speed); | ||
124 | |||
125 | if (speed == SPEED_1000) | ||
126 | ssr |= RGMII_SSR_1000(input); | ||
127 | else if (speed == SPEED_100) | ||
128 | ssr |= RGMII_SSR_100(input); | ||
129 | |||
130 | out_be32(&p->ssr, ssr); | ||
131 | |||
132 | mutex_unlock(&dev->lock); | ||
133 | } | ||
134 | |||
135 | void rgmii_get_mdio(struct of_device *ofdev, int input) | ||
136 | { | ||
137 | struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
138 | struct rgmii_regs *p = dev->base; | ||
139 | u32 fer; | ||
140 | |||
141 | RGMII_DBG2(dev, "get_mdio(%d)" NL, input); | ||
142 | |||
143 | if (dev->type != RGMII_AXON) | ||
144 | return; | ||
145 | |||
146 | mutex_lock(&dev->lock); | ||
147 | |||
148 | fer = in_be32(&p->fer); | ||
149 | fer |= 0x00080000u >> input; | ||
150 | out_be32(&p->fer, fer); | ||
151 | (void)in_be32(&p->fer); | ||
152 | |||
153 | DBG2(dev, " fer = 0x%08x\n", fer); | ||
154 | } | ||
155 | |||
156 | void rgmii_put_mdio(struct of_device *ofdev, int input) | ||
157 | { | ||
158 | struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
159 | struct rgmii_regs *p = dev->base; | ||
160 | u32 fer; | ||
161 | |||
162 | RGMII_DBG2(dev, "put_mdio(%d)" NL, input); | ||
163 | |||
164 | if (dev->type != RGMII_AXON) | ||
165 | return; | ||
166 | |||
167 | fer = in_be32(&p->fer); | ||
168 | fer &= ~(0x00080000u >> input); | ||
169 | out_be32(&p->fer, fer); | ||
170 | (void)in_be32(&p->fer); | ||
171 | |||
172 | DBG2(dev, " fer = 0x%08x\n", fer); | ||
173 | |||
174 | mutex_unlock(&dev->lock); | ||
175 | } | ||
176 | |||
177 | void __devexit rgmii_detach(struct of_device *ofdev, int input) | ||
178 | { | ||
179 | struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
180 | struct rgmii_regs *p = dev->base; | ||
181 | |||
182 | mutex_lock(&dev->lock); | ||
183 | |||
184 | BUG_ON(!dev || dev->users == 0); | ||
185 | |||
186 | RGMII_DBG(dev, "detach(%d)" NL, input); | ||
187 | |||
188 | /* Disable this input */ | ||
189 | out_be32(&p->fer, in_be32(&p->fer) & ~RGMII_FER_MASK(input)); | ||
190 | |||
191 | --dev->users; | ||
192 | |||
193 | mutex_unlock(&dev->lock); | ||
194 | } | ||
195 | |||
196 | int rgmii_get_regs_len(struct of_device *ofdev) | ||
197 | { | ||
198 | return sizeof(struct emac_ethtool_regs_subhdr) + | ||
199 | sizeof(struct rgmii_regs); | ||
200 | } | ||
201 | |||
202 | void *rgmii_dump_regs(struct of_device *ofdev, void *buf) | ||
203 | { | ||
204 | struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
205 | struct emac_ethtool_regs_subhdr *hdr = buf; | ||
206 | struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1); | ||
207 | |||
208 | hdr->version = 0; | ||
209 | hdr->index = 0; /* for now, are there chips with more than one | ||
210 | * rgmii ? if yes, then we'll add a cell_index | ||
211 | * like we do for emac | ||
212 | */ | ||
213 | memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs)); | ||
214 | return regs + 1; | ||
215 | } | ||
216 | |||
217 | |||
218 | static int __devinit rgmii_probe(struct of_device *ofdev, | ||
219 | const struct of_device_id *match) | ||
220 | { | ||
221 | struct device_node *np = ofdev->node; | ||
222 | struct rgmii_instance *dev; | ||
223 | struct resource regs; | ||
224 | int rc; | ||
225 | |||
226 | rc = -ENOMEM; | ||
227 | dev = kzalloc(sizeof(struct rgmii_instance), GFP_KERNEL); | ||
228 | if (dev == NULL) { | ||
229 | printk(KERN_ERR "%s: could not allocate RGMII device!\n", | ||
230 | np->full_name); | ||
231 | goto err_gone; | ||
232 | } | ||
233 | |||
234 | mutex_init(&dev->lock); | ||
235 | dev->ofdev = ofdev; | ||
236 | |||
237 | rc = -ENXIO; | ||
238 | if (of_address_to_resource(np, 0, ®s)) { | ||
239 | printk(KERN_ERR "%s: Can't get registers address\n", | ||
240 | np->full_name); | ||
241 | goto err_free; | ||
242 | } | ||
243 | |||
244 | rc = -ENOMEM; | ||
245 | dev->base = (struct rgmii_regs *)ioremap(regs.start, | ||
246 | sizeof(struct rgmii_regs)); | ||
247 | if (dev->base == NULL) { | ||
248 | printk(KERN_ERR "%s: Can't map device registers!\n", | ||
249 | np->full_name); | ||
250 | goto err_free; | ||
251 | } | ||
252 | |||
253 | /* Check for RGMII type */ | ||
254 | if (device_is_compatible(ofdev->node, "ibm,rgmii-axon")) | ||
255 | dev->type = RGMII_AXON; | ||
256 | else | ||
257 | dev->type = RGMII_STANDARD; | ||
258 | |||
259 | DBG2(dev, " Boot FER = 0x%08x, SSR = 0x%08x\n", | ||
260 | in_be32(&dev->base->fer), in_be32(&dev->base->ssr)); | ||
261 | |||
262 | /* Disable all inputs by default */ | ||
263 | out_be32(&dev->base->fer, 0); | ||
264 | |||
265 | printk(KERN_INFO | ||
266 | "RGMII %s %s initialized\n", | ||
267 | dev->type == RGMII_STANDARD ? "standard" : "axon", | ||
268 | ofdev->node->full_name); | ||
269 | |||
270 | wmb(); | ||
271 | dev_set_drvdata(&ofdev->dev, dev); | ||
272 | |||
273 | return 0; | ||
274 | |||
275 | err_free: | ||
276 | kfree(dev); | ||
277 | err_gone: | ||
278 | return rc; | ||
279 | } | ||
280 | |||
281 | static int __devexit rgmii_remove(struct of_device *ofdev) | ||
282 | { | ||
283 | struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
284 | |||
285 | dev_set_drvdata(&ofdev->dev, NULL); | ||
286 | |||
287 | WARN_ON(dev->users != 0); | ||
288 | |||
289 | iounmap(dev->base); | ||
290 | kfree(dev); | ||
291 | |||
292 | return 0; | ||
293 | } | ||
294 | |||
295 | static struct of_device_id rgmii_match[] = | ||
296 | { | ||
297 | { | ||
298 | .type = "rgmii-interface", | ||
299 | .compatible = "ibm,rgmii", | ||
300 | }, | ||
301 | { | ||
302 | .type = "emac-rgmii", | ||
303 | }, | ||
304 | {}, | ||
305 | }; | ||
306 | |||
307 | static struct of_platform_driver rgmii_driver = { | ||
308 | .name = "emac-rgmii", | ||
309 | .match_table = rgmii_match, | ||
310 | |||
311 | .probe = rgmii_probe, | ||
312 | .remove = rgmii_remove, | ||
313 | }; | ||
314 | |||
315 | int __init rgmii_init(void) | ||
316 | { | ||
317 | return of_register_platform_driver(&rgmii_driver); | ||
318 | } | ||
319 | |||
320 | void rgmii_exit(void) | ||
321 | { | ||
322 | of_unregister_platform_driver(&rgmii_driver); | ||
323 | } | ||
diff --git a/drivers/net/ibm_newemac/rgmii.h b/drivers/net/ibm_newemac/rgmii.h new file mode 100644 index 000000000000..57806833121e --- /dev/null +++ b/drivers/net/ibm_newemac/rgmii.h | |||
@@ -0,0 +1,76 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_newemac/rgmii.h | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support. | ||
5 | * | ||
6 | * Based on ocp_zmii.h/ibm_emac_zmii.h | ||
7 | * Armin Kuster akuster@mvista.com | ||
8 | * | ||
9 | * Copyright 2004 MontaVista Software, Inc. | ||
10 | * Matt Porter <mporter@kernel.crashing.org> | ||
11 | * | ||
12 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
13 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
14 | * | ||
15 | * This program is free software; you can redistribute it and/or modify it | ||
16 | * under the terms of the GNU General Public License as published by the | ||
17 | * Free Software Foundation; either version 2 of the License, or (at your | ||
18 | * option) any later version. | ||
19 | */ | ||
20 | |||
21 | #ifndef __IBM_NEWEMAC_RGMII_H | ||
22 | #define __IBM_NEWEMAC_RGMII_H | ||
23 | |||
24 | /* RGMII bridge type */ | ||
25 | #define RGMII_STANDARD 0 | ||
26 | #define RGMII_AXON 1 | ||
27 | |||
28 | /* RGMII bridge */ | ||
29 | struct rgmii_regs { | ||
30 | u32 fer; /* Function enable register */ | ||
31 | u32 ssr; /* Speed select register */ | ||
32 | }; | ||
33 | |||
34 | /* RGMII device */ | ||
35 | struct rgmii_instance { | ||
36 | struct rgmii_regs __iomem *base; | ||
37 | |||
38 | /* Type of RGMII bridge */ | ||
39 | int type; | ||
40 | |||
41 | /* Only one EMAC whacks us at a time */ | ||
42 | struct mutex lock; | ||
43 | |||
44 | /* number of EMACs using this RGMII bridge */ | ||
45 | int users; | ||
46 | |||
47 | /* OF device instance */ | ||
48 | struct of_device *ofdev; | ||
49 | }; | ||
50 | |||
51 | #ifdef CONFIG_IBM_NEW_EMAC_RGMII | ||
52 | |||
53 | extern int rgmii_init(void); | ||
54 | extern void rgmii_exit(void); | ||
55 | extern int rgmii_attach(struct of_device *ofdev, int input, int mode); | ||
56 | extern void rgmii_detach(struct of_device *ofdev, int input); | ||
57 | extern void rgmii_get_mdio(struct of_device *ofdev, int input); | ||
58 | extern void rgmii_put_mdio(struct of_device *ofdev, int input); | ||
59 | extern void rgmii_set_speed(struct of_device *ofdev, int input, int speed); | ||
60 | extern int rgmii_get_regs_len(struct of_device *ofdev); | ||
61 | extern void *rgmii_dump_regs(struct of_device *ofdev, void *buf); | ||
62 | |||
63 | #else | ||
64 | |||
65 | # define rgmii_init() 0 | ||
66 | # define rgmii_exit() do { } while(0) | ||
67 | # define rgmii_attach(x,y,z) (-ENXIO) | ||
68 | # define rgmii_detach(x,y) do { } while(0) | ||
69 | # define rgmii_get_mdio(o,i) do { } while (0) | ||
70 | # define rgmii_put_mdio(o,i) do { } while (0) | ||
71 | # define rgmii_set_speed(x,y,z) do { } while(0) | ||
72 | # define rgmii_get_regs_len(x) 0 | ||
73 | # define rgmii_dump_regs(x,buf) (buf) | ||
74 | #endif /* !CONFIG_IBM_NEW_EMAC_RGMII */ | ||
75 | |||
76 | #endif /* __IBM_NEWEMAC_RGMII_H */ | ||
diff --git a/drivers/net/ibm_newemac/tah.c b/drivers/net/ibm_newemac/tah.c new file mode 100644 index 000000000000..e05c7e81efb6 --- /dev/null +++ b/drivers/net/ibm_newemac/tah.c | |||
@@ -0,0 +1,173 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_newemac/tah.c | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, TAH support. | ||
5 | * | ||
6 | * Copyright 2004 MontaVista Software, Inc. | ||
7 | * Matt Porter <mporter@kernel.crashing.org> | ||
8 | * | ||
9 | * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net> | ||
10 | * | ||
11 | * This program is free software; you can redistribute it and/or modify it | ||
12 | * under the terms of the GNU General Public License as published by the | ||
13 | * Free Software Foundation; either version 2 of the License, or (at your | ||
14 | * option) any later version. | ||
15 | */ | ||
16 | #include <asm/io.h> | ||
17 | |||
18 | #include "emac.h" | ||
19 | #include "core.h" | ||
20 | |||
21 | int __devinit tah_attach(struct of_device *ofdev, int channel) | ||
22 | { | ||
23 | struct tah_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
24 | |||
25 | mutex_lock(&dev->lock); | ||
26 | /* Reset has been done at probe() time... nothing else to do for now */ | ||
27 | ++dev->users; | ||
28 | mutex_unlock(&dev->lock); | ||
29 | |||
30 | return 0; | ||
31 | } | ||
32 | |||
33 | void __devexit tah_detach(struct of_device *ofdev, int channel) | ||
34 | { | ||
35 | struct tah_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
36 | |||
37 | mutex_lock(&dev->lock); | ||
38 | --dev->users; | ||
39 | mutex_unlock(&dev->lock); | ||
40 | } | ||
41 | |||
42 | void tah_reset(struct of_device *ofdev) | ||
43 | { | ||
44 | struct tah_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
45 | struct tah_regs *p = dev->base; | ||
46 | int n; | ||
47 | |||
48 | /* Reset TAH */ | ||
49 | out_be32(&p->mr, TAH_MR_SR); | ||
50 | n = 100; | ||
51 | while ((in_be32(&p->mr) & TAH_MR_SR) && n) | ||
52 | --n; | ||
53 | |||
54 | if (unlikely(!n)) | ||
55 | printk(KERN_ERR "%s: reset timeout\n", ofdev->node->full_name); | ||
56 | |||
57 | /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */ | ||
58 | out_be32(&p->mr, | ||
59 | TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP | | ||
60 | TAH_MR_DIG); | ||
61 | } | ||
62 | |||
63 | int tah_get_regs_len(struct of_device *ofdev) | ||
64 | { | ||
65 | return sizeof(struct emac_ethtool_regs_subhdr) + | ||
66 | sizeof(struct tah_regs); | ||
67 | } | ||
68 | |||
69 | void *tah_dump_regs(struct of_device *ofdev, void *buf) | ||
70 | { | ||
71 | struct tah_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
72 | struct emac_ethtool_regs_subhdr *hdr = buf; | ||
73 | struct tah_regs *regs = (struct tah_regs *)(hdr + 1); | ||
74 | |||
75 | hdr->version = 0; | ||
76 | hdr->index = 0; /* for now, are there chips with more than one | ||
77 | * zmii ? if yes, then we'll add a cell_index | ||
78 | * like we do for emac | ||
79 | */ | ||
80 | memcpy_fromio(regs, dev->base, sizeof(struct tah_regs)); | ||
81 | return regs + 1; | ||
82 | } | ||
83 | |||
84 | static int __devinit tah_probe(struct of_device *ofdev, | ||
85 | const struct of_device_id *match) | ||
86 | { | ||
87 | struct device_node *np = ofdev->node; | ||
88 | struct tah_instance *dev; | ||
89 | struct resource regs; | ||
90 | int rc; | ||
91 | |||
92 | rc = -ENOMEM; | ||
93 | dev = kzalloc(sizeof(struct tah_instance), GFP_KERNEL); | ||
94 | if (dev == NULL) { | ||
95 | printk(KERN_ERR "%s: could not allocate TAH device!\n", | ||
96 | np->full_name); | ||
97 | goto err_gone; | ||
98 | } | ||
99 | |||
100 | mutex_init(&dev->lock); | ||
101 | dev->ofdev = ofdev; | ||
102 | |||
103 | rc = -ENXIO; | ||
104 | if (of_address_to_resource(np, 0, ®s)) { | ||
105 | printk(KERN_ERR "%s: Can't get registers address\n", | ||
106 | np->full_name); | ||
107 | goto err_free; | ||
108 | } | ||
109 | |||
110 | rc = -ENOMEM; | ||
111 | dev->base = (struct tah_regs *)ioremap(regs.start, | ||
112 | sizeof(struct tah_regs)); | ||
113 | if (dev->base == NULL) { | ||
114 | printk(KERN_ERR "%s: Can't map device registers!\n", | ||
115 | np->full_name); | ||
116 | goto err_free; | ||
117 | } | ||
118 | |||
119 | /* Initialize TAH and enable IPv4 checksum verification, no TSO yet */ | ||
120 | tah_reset(ofdev); | ||
121 | |||
122 | printk(KERN_INFO | ||
123 | "TAH %s initialized\n", ofdev->node->full_name); | ||
124 | wmb(); | ||
125 | dev_set_drvdata(&ofdev->dev, dev); | ||
126 | |||
127 | return 0; | ||
128 | |||
129 | err_free: | ||
130 | kfree(dev); | ||
131 | err_gone: | ||
132 | return rc; | ||
133 | } | ||
134 | |||
135 | static int __devexit tah_remove(struct of_device *ofdev) | ||
136 | { | ||
137 | struct tah_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
138 | |||
139 | dev_set_drvdata(&ofdev->dev, NULL); | ||
140 | |||
141 | WARN_ON(dev->users != 0); | ||
142 | |||
143 | iounmap(dev->base); | ||
144 | kfree(dev); | ||
145 | |||
146 | return 0; | ||
147 | } | ||
148 | |||
149 | static struct of_device_id tah_match[] = | ||
150 | { | ||
151 | { | ||
152 | .type = "tah", | ||
153 | }, | ||
154 | {}, | ||
155 | }; | ||
156 | |||
157 | static struct of_platform_driver tah_driver = { | ||
158 | .name = "emac-tah", | ||
159 | .match_table = tah_match, | ||
160 | |||
161 | .probe = tah_probe, | ||
162 | .remove = tah_remove, | ||
163 | }; | ||
164 | |||
165 | int __init tah_init(void) | ||
166 | { | ||
167 | return of_register_platform_driver(&tah_driver); | ||
168 | } | ||
169 | |||
170 | void tah_exit(void) | ||
171 | { | ||
172 | of_unregister_platform_driver(&tah_driver); | ||
173 | } | ||
diff --git a/drivers/net/ibm_newemac/tah.h b/drivers/net/ibm_newemac/tah.h new file mode 100644 index 000000000000..bc41853b6e26 --- /dev/null +++ b/drivers/net/ibm_newemac/tah.h | |||
@@ -0,0 +1,90 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_newemac/tah.h | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, TAH support. | ||
5 | * | ||
6 | * Copyright 2004 MontaVista Software, Inc. | ||
7 | * Matt Porter <mporter@kernel.crashing.org> | ||
8 | * | ||
9 | * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net> | ||
10 | * | ||
11 | * This program is free software; you can redistribute it and/or modify it | ||
12 | * under the terms of the GNU General Public License as published by the | ||
13 | * Free Software Foundation; either version 2 of the License, or (at your | ||
14 | * option) any later version. | ||
15 | */ | ||
16 | |||
17 | #ifndef __IBM_NEWEMAC_TAH_H | ||
18 | #define __IBM_NEWEMAC_TAH_H | ||
19 | |||
20 | /* TAH */ | ||
21 | struct tah_regs { | ||
22 | u32 revid; | ||
23 | u32 pad[3]; | ||
24 | u32 mr; | ||
25 | u32 ssr0; | ||
26 | u32 ssr1; | ||
27 | u32 ssr2; | ||
28 | u32 ssr3; | ||
29 | u32 ssr4; | ||
30 | u32 ssr5; | ||
31 | u32 tsr; | ||
32 | }; | ||
33 | |||
34 | |||
35 | /* TAH device */ | ||
36 | struct tah_instance { | ||
37 | struct tah_regs __iomem *base; | ||
38 | |||
39 | /* Only one EMAC whacks us at a time */ | ||
40 | struct mutex lock; | ||
41 | |||
42 | /* number of EMACs using this TAH */ | ||
43 | int users; | ||
44 | |||
45 | /* OF device instance */ | ||
46 | struct of_device *ofdev; | ||
47 | }; | ||
48 | |||
49 | |||
50 | /* TAH engine */ | ||
51 | #define TAH_MR_CVR 0x80000000 | ||
52 | #define TAH_MR_SR 0x40000000 | ||
53 | #define TAH_MR_ST_256 0x01000000 | ||
54 | #define TAH_MR_ST_512 0x02000000 | ||
55 | #define TAH_MR_ST_768 0x03000000 | ||
56 | #define TAH_MR_ST_1024 0x04000000 | ||
57 | #define TAH_MR_ST_1280 0x05000000 | ||
58 | #define TAH_MR_ST_1536 0x06000000 | ||
59 | #define TAH_MR_TFS_16KB 0x00000000 | ||
60 | #define TAH_MR_TFS_2KB 0x00200000 | ||
61 | #define TAH_MR_TFS_4KB 0x00400000 | ||
62 | #define TAH_MR_TFS_6KB 0x00600000 | ||
63 | #define TAH_MR_TFS_8KB 0x00800000 | ||
64 | #define TAH_MR_TFS_10KB 0x00a00000 | ||
65 | #define TAH_MR_DTFP 0x00100000 | ||
66 | #define TAH_MR_DIG 0x00080000 | ||
67 | |||
68 | #ifdef CONFIG_IBM_NEW_EMAC_TAH | ||
69 | |||
70 | extern int tah_init(void); | ||
71 | extern void tah_exit(void); | ||
72 | extern int tah_attach(struct of_device *ofdev, int channel); | ||
73 | extern void tah_detach(struct of_device *ofdev, int channel); | ||
74 | extern void tah_reset(struct of_device *ofdev); | ||
75 | extern int tah_get_regs_len(struct of_device *ofdev); | ||
76 | extern void *tah_dump_regs(struct of_device *ofdev, void *buf); | ||
77 | |||
78 | #else | ||
79 | |||
80 | # define tah_init() 0 | ||
81 | # define tah_exit() do { } while(0) | ||
82 | # define tah_attach(x,y) (-ENXIO) | ||
83 | # define tah_detach(x,y) do { } while(0) | ||
84 | # define tah_reset(x) do { } while(0) | ||
85 | # define tah_get_regs_len(x) 0 | ||
86 | # define tah_dump_regs(x,buf) (buf) | ||
87 | |||
88 | #endif /* !CONFIG_IBM_NEW_EMAC_TAH */ | ||
89 | |||
90 | #endif /* __IBM_NEWEMAC_TAH_H */ | ||
diff --git a/drivers/net/ibm_newemac/zmii.c b/drivers/net/ibm_newemac/zmii.c new file mode 100644 index 000000000000..d06312901848 --- /dev/null +++ b/drivers/net/ibm_newemac/zmii.c | |||
@@ -0,0 +1,322 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_newemac/zmii.c | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support. | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Armin Kuster <akuster@mvista.com> | ||
11 | * Copyright 2001 MontaVista Softare Inc. | ||
12 | * | ||
13 | * This program is free software; you can redistribute it and/or modify it | ||
14 | * under the terms of the GNU General Public License as published by the | ||
15 | * Free Software Foundation; either version 2 of the License, or (at your | ||
16 | * option) any later version. | ||
17 | * | ||
18 | */ | ||
19 | #include <linux/kernel.h> | ||
20 | #include <linux/ethtool.h> | ||
21 | #include <asm/io.h> | ||
22 | |||
23 | #include "emac.h" | ||
24 | #include "core.h" | ||
25 | |||
26 | /* ZMIIx_FER */ | ||
27 | #define ZMII_FER_MDI(idx) (0x80000000 >> ((idx) * 4)) | ||
28 | #define ZMII_FER_MDI_ALL (ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \ | ||
29 | ZMII_FER_MDI(2) | ZMII_FER_MDI(3)) | ||
30 | |||
31 | #define ZMII_FER_SMII(idx) (0x40000000 >> ((idx) * 4)) | ||
32 | #define ZMII_FER_RMII(idx) (0x20000000 >> ((idx) * 4)) | ||
33 | #define ZMII_FER_MII(idx) (0x10000000 >> ((idx) * 4)) | ||
34 | |||
35 | /* ZMIIx_SSR */ | ||
36 | #define ZMII_SSR_SCI(idx) (0x40000000 >> ((idx) * 4)) | ||
37 | #define ZMII_SSR_FSS(idx) (0x20000000 >> ((idx) * 4)) | ||
38 | #define ZMII_SSR_SP(idx) (0x10000000 >> ((idx) * 4)) | ||
39 | |||
40 | /* ZMII only supports MII, RMII and SMII | ||
41 | * we also support autodetection for backward compatibility | ||
42 | */ | ||
43 | static inline int zmii_valid_mode(int mode) | ||
44 | { | ||
45 | return mode == PHY_MODE_MII || | ||
46 | mode == PHY_MODE_RMII || | ||
47 | mode == PHY_MODE_SMII || | ||
48 | mode == PHY_MODE_NA; | ||
49 | } | ||
50 | |||
51 | static inline const char *zmii_mode_name(int mode) | ||
52 | { | ||
53 | switch (mode) { | ||
54 | case PHY_MODE_MII: | ||
55 | return "MII"; | ||
56 | case PHY_MODE_RMII: | ||
57 | return "RMII"; | ||
58 | case PHY_MODE_SMII: | ||
59 | return "SMII"; | ||
60 | default: | ||
61 | BUG(); | ||
62 | } | ||
63 | } | ||
64 | |||
65 | static inline u32 zmii_mode_mask(int mode, int input) | ||
66 | { | ||
67 | switch (mode) { | ||
68 | case PHY_MODE_MII: | ||
69 | return ZMII_FER_MII(input); | ||
70 | case PHY_MODE_RMII: | ||
71 | return ZMII_FER_RMII(input); | ||
72 | case PHY_MODE_SMII: | ||
73 | return ZMII_FER_SMII(input); | ||
74 | default: | ||
75 | return 0; | ||
76 | } | ||
77 | } | ||
78 | |||
79 | int __devinit zmii_attach(struct of_device *ofdev, int input, int *mode) | ||
80 | { | ||
81 | struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
82 | struct zmii_regs *p = dev->base; | ||
83 | |||
84 | ZMII_DBG(dev, "init(%d, %d)" NL, input, *mode); | ||
85 | |||
86 | if (!zmii_valid_mode(*mode)) | ||
87 | /* Probably an EMAC connected to RGMII, | ||
88 | * but it still may need ZMII for MDIO so | ||
89 | * we don't fail here. | ||
90 | */ | ||
91 | return 0; | ||
92 | |||
93 | mutex_lock(&dev->lock); | ||
94 | |||
95 | /* Autodetect ZMII mode if not specified. | ||
96 | * This is only for backward compatibility with the old driver. | ||
97 | * Please, always specify PHY mode in your board port to avoid | ||
98 | * any surprises. | ||
99 | */ | ||
100 | if (dev->mode == PHY_MODE_NA) { | ||
101 | if (*mode == PHY_MODE_NA) { | ||
102 | u32 r = dev->fer_save; | ||
103 | |||
104 | ZMII_DBG(dev, "autodetecting mode, FER = 0x%08x" NL, r); | ||
105 | |||
106 | if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1))) | ||
107 | dev->mode = PHY_MODE_MII; | ||
108 | else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1))) | ||
109 | dev->mode = PHY_MODE_RMII; | ||
110 | else | ||
111 | dev->mode = PHY_MODE_SMII; | ||
112 | } else | ||
113 | dev->mode = *mode; | ||
114 | |||
115 | printk(KERN_NOTICE "%s: bridge in %s mode\n", | ||
116 | ofdev->node->full_name, zmii_mode_name(dev->mode)); | ||
117 | } else { | ||
118 | /* All inputs must use the same mode */ | ||
119 | if (*mode != PHY_MODE_NA && *mode != dev->mode) { | ||
120 | printk(KERN_ERR | ||
121 | "%s: invalid mode %d specified for input %d\n", | ||
122 | ofdev->node->full_name, *mode, input); | ||
123 | mutex_unlock(&dev->lock); | ||
124 | return -EINVAL; | ||
125 | } | ||
126 | } | ||
127 | |||
128 | /* Report back correct PHY mode, | ||
129 | * it may be used during PHY initialization. | ||
130 | */ | ||
131 | *mode = dev->mode; | ||
132 | |||
133 | /* Enable this input */ | ||
134 | out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input)); | ||
135 | ++dev->users; | ||
136 | |||
137 | mutex_unlock(&dev->lock); | ||
138 | |||
139 | return 0; | ||
140 | } | ||
141 | |||
142 | void zmii_get_mdio(struct of_device *ofdev, int input) | ||
143 | { | ||
144 | struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
145 | u32 fer; | ||
146 | |||
147 | ZMII_DBG2(dev, "get_mdio(%d)" NL, input); | ||
148 | |||
149 | mutex_lock(&dev->lock); | ||
150 | |||
151 | fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL; | ||
152 | out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input)); | ||
153 | } | ||
154 | |||
155 | void zmii_put_mdio(struct of_device *ofdev, int input) | ||
156 | { | ||
157 | struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
158 | |||
159 | ZMII_DBG2(dev, "put_mdio(%d)" NL, input); | ||
160 | mutex_unlock(&dev->lock); | ||
161 | } | ||
162 | |||
163 | |||
164 | void zmii_set_speed(struct of_device *ofdev, int input, int speed) | ||
165 | { | ||
166 | struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
167 | u32 ssr; | ||
168 | |||
169 | mutex_lock(&dev->lock); | ||
170 | |||
171 | ssr = in_be32(&dev->base->ssr); | ||
172 | |||
173 | ZMII_DBG(dev, "speed(%d, %d)" NL, input, speed); | ||
174 | |||
175 | if (speed == SPEED_100) | ||
176 | ssr |= ZMII_SSR_SP(input); | ||
177 | else | ||
178 | ssr &= ~ZMII_SSR_SP(input); | ||
179 | |||
180 | out_be32(&dev->base->ssr, ssr); | ||
181 | |||
182 | mutex_unlock(&dev->lock); | ||
183 | } | ||
184 | |||
185 | void __devexit zmii_detach(struct of_device *ofdev, int input) | ||
186 | { | ||
187 | struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
188 | |||
189 | BUG_ON(!dev || dev->users == 0); | ||
190 | |||
191 | mutex_lock(&dev->lock); | ||
192 | |||
193 | ZMII_DBG(dev, "detach(%d)" NL, input); | ||
194 | |||
195 | /* Disable this input */ | ||
196 | out_be32(&dev->base->fer, | ||
197 | in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input)); | ||
198 | |||
199 | --dev->users; | ||
200 | |||
201 | mutex_unlock(&dev->lock); | ||
202 | } | ||
203 | |||
204 | int zmii_get_regs_len(struct of_device *ofdev) | ||
205 | { | ||
206 | return sizeof(struct emac_ethtool_regs_subhdr) + | ||
207 | sizeof(struct zmii_regs); | ||
208 | } | ||
209 | |||
210 | void *zmii_dump_regs(struct of_device *ofdev, void *buf) | ||
211 | { | ||
212 | struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
213 | struct emac_ethtool_regs_subhdr *hdr = buf; | ||
214 | struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1); | ||
215 | |||
216 | hdr->version = 0; | ||
217 | hdr->index = 0; /* for now, are there chips with more than one | ||
218 | * zmii ? if yes, then we'll add a cell_index | ||
219 | * like we do for emac | ||
220 | */ | ||
221 | memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs)); | ||
222 | return regs + 1; | ||
223 | } | ||
224 | |||
225 | static int __devinit zmii_probe(struct of_device *ofdev, | ||
226 | const struct of_device_id *match) | ||
227 | { | ||
228 | struct device_node *np = ofdev->node; | ||
229 | struct zmii_instance *dev; | ||
230 | struct resource regs; | ||
231 | int rc; | ||
232 | |||
233 | rc = -ENOMEM; | ||
234 | dev = kzalloc(sizeof(struct zmii_instance), GFP_KERNEL); | ||
235 | if (dev == NULL) { | ||
236 | printk(KERN_ERR "%s: could not allocate ZMII device!\n", | ||
237 | np->full_name); | ||
238 | goto err_gone; | ||
239 | } | ||
240 | |||
241 | mutex_init(&dev->lock); | ||
242 | dev->ofdev = ofdev; | ||
243 | dev->mode = PHY_MODE_NA; | ||
244 | |||
245 | rc = -ENXIO; | ||
246 | if (of_address_to_resource(np, 0, ®s)) { | ||
247 | printk(KERN_ERR "%s: Can't get registers address\n", | ||
248 | np->full_name); | ||
249 | goto err_free; | ||
250 | } | ||
251 | |||
252 | rc = -ENOMEM; | ||
253 | dev->base = (struct zmii_regs *)ioremap(regs.start, | ||
254 | sizeof(struct zmii_regs)); | ||
255 | if (dev->base == NULL) { | ||
256 | printk(KERN_ERR "%s: Can't map device registers!\n", | ||
257 | np->full_name); | ||
258 | goto err_free; | ||
259 | } | ||
260 | |||
261 | /* We may need FER value for autodetection later */ | ||
262 | dev->fer_save = in_be32(&dev->base->fer); | ||
263 | |||
264 | /* Disable all inputs by default */ | ||
265 | out_be32(&dev->base->fer, 0); | ||
266 | |||
267 | printk(KERN_INFO | ||
268 | "ZMII %s initialized\n", ofdev->node->full_name); | ||
269 | wmb(); | ||
270 | dev_set_drvdata(&ofdev->dev, dev); | ||
271 | |||
272 | return 0; | ||
273 | |||
274 | err_free: | ||
275 | kfree(dev); | ||
276 | err_gone: | ||
277 | return rc; | ||
278 | } | ||
279 | |||
280 | static int __devexit zmii_remove(struct of_device *ofdev) | ||
281 | { | ||
282 | struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev); | ||
283 | |||
284 | dev_set_drvdata(&ofdev->dev, NULL); | ||
285 | |||
286 | WARN_ON(dev->users != 0); | ||
287 | |||
288 | iounmap(dev->base); | ||
289 | kfree(dev); | ||
290 | |||
291 | return 0; | ||
292 | } | ||
293 | |||
294 | static struct of_device_id zmii_match[] = | ||
295 | { | ||
296 | { | ||
297 | .compatible = "ibm,zmii", | ||
298 | }, | ||
299 | /* For backward compat with old DT */ | ||
300 | { | ||
301 | .type = "emac-zmii", | ||
302 | }, | ||
303 | {}, | ||
304 | }; | ||
305 | |||
306 | static struct of_platform_driver zmii_driver = { | ||
307 | .name = "emac-zmii", | ||
308 | .match_table = zmii_match, | ||
309 | |||
310 | .probe = zmii_probe, | ||
311 | .remove = zmii_remove, | ||
312 | }; | ||
313 | |||
314 | int __init zmii_init(void) | ||
315 | { | ||
316 | return of_register_platform_driver(&zmii_driver); | ||
317 | } | ||
318 | |||
319 | void zmii_exit(void) | ||
320 | { | ||
321 | of_unregister_platform_driver(&zmii_driver); | ||
322 | } | ||
diff --git a/drivers/net/ibm_newemac/zmii.h b/drivers/net/ibm_newemac/zmii.h new file mode 100644 index 000000000000..82a9968b1f74 --- /dev/null +++ b/drivers/net/ibm_newemac/zmii.h | |||
@@ -0,0 +1,73 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_newemac/zmii.h | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support. | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Armin Kuster <akuster@mvista.com> | ||
11 | * Copyright 2001 MontaVista Softare Inc. | ||
12 | * | ||
13 | * This program is free software; you can redistribute it and/or modify it | ||
14 | * under the terms of the GNU General Public License as published by the | ||
15 | * Free Software Foundation; either version 2 of the License, or (at your | ||
16 | * option) any later version. | ||
17 | * | ||
18 | */ | ||
19 | #ifndef __IBM_NEWEMAC_ZMII_H | ||
20 | #define __IBM_NEWEMAC_ZMII_H | ||
21 | |||
22 | /* ZMII bridge registers */ | ||
23 | struct zmii_regs { | ||
24 | u32 fer; /* Function enable reg */ | ||
25 | u32 ssr; /* Speed select reg */ | ||
26 | u32 smiirs; /* SMII status reg */ | ||
27 | }; | ||
28 | |||
29 | /* ZMII device */ | ||
30 | struct zmii_instance { | ||
31 | struct zmii_regs __iomem *base; | ||
32 | |||
33 | /* Only one EMAC whacks us at a time */ | ||
34 | struct mutex lock; | ||
35 | |||
36 | /* subset of PHY_MODE_XXXX */ | ||
37 | int mode; | ||
38 | |||
39 | /* number of EMACs using this ZMII bridge */ | ||
40 | int users; | ||
41 | |||
42 | /* FER value left by firmware */ | ||
43 | u32 fer_save; | ||
44 | |||
45 | /* OF device instance */ | ||
46 | struct of_device *ofdev; | ||
47 | }; | ||
48 | |||
49 | #ifdef CONFIG_IBM_NEW_EMAC_ZMII | ||
50 | |||
51 | extern int zmii_init(void); | ||
52 | extern void zmii_exit(void); | ||
53 | extern int zmii_attach(struct of_device *ofdev, int input, int *mode); | ||
54 | extern void zmii_detach(struct of_device *ofdev, int input); | ||
55 | extern void zmii_get_mdio(struct of_device *ofdev, int input); | ||
56 | extern void zmii_put_mdio(struct of_device *ofdev, int input); | ||
57 | extern void zmii_set_speed(struct of_device *ofdev, int input, int speed); | ||
58 | extern int zmii_get_regs_len(struct of_device *ocpdev); | ||
59 | extern void *zmii_dump_regs(struct of_device *ofdev, void *buf); | ||
60 | |||
61 | #else | ||
62 | # define zmii_init() 0 | ||
63 | # define zmii_exit() do { } while(0) | ||
64 | # define zmii_attach(x,y,z) (-ENXIO) | ||
65 | # define zmii_detach(x,y) do { } while(0) | ||
66 | # define zmii_get_mdio(x,y) do { } while(0) | ||
67 | # define zmii_put_mdio(x,y) do { } while(0) | ||
68 | # define zmii_set_speed(x,y,z) do { } while(0) | ||
69 | # define zmii_get_regs_len(x) 0 | ||
70 | # define zmii_dump_regs(x,buf) (buf) | ||
71 | #endif /* !CONFIG_IBM_NEW_EMAC_ZMII */ | ||
72 | |||
73 | #endif /* __IBM_NEWEMAC_ZMII_H */ | ||