2 files changed, 20 insertions, 11 deletions

diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index 73b52f17ea84..35f3b5a05723 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -2258,6 +2258,11 @@ static void bnx2x_bcm8726_external_rom_boot(struct link_params *params)
                        MDIO_PMA_REG_GEN_CTRL,
                        MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
 
+        bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+                       MDIO_PMA_DEVAD,
+                       MDIO_PMA_REG_GEN_CTRL2,
+                       0x73A0);
+
         /* Clear soft reset.
         Will automatically reset micro-controller re-boot */
         bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
@@ -2265,8 +2270,8 @@ static void bnx2x_bcm8726_external_rom_boot(struct link_params *params)
                        MDIO_PMA_REG_GEN_CTRL,
                        MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
 
-        /* wait for 100ms for microcode load */
-        msleep(100);
+        /* wait for 150ms for microcode load */
+        msleep(150);
 
         /* Disable serial boot control, tristates pins SS_N, SCK, MOSI, MISO */
         bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
@@ -2524,7 +2529,7 @@ static u8 bnx2x_bcm8726_set_limiting_mode(struct link_params *params,
         u8 ext_phy_addr = ((params->ext_phy_config &
                             PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
+        u16 cur_limiting_mode;
         if (bnx2x_read_sfp_module_eeprom(params,
                                        SFP_EEPROM_OPTIONS_ADDR,
                                        SFP_EEPROM_OPTIONS_SIZE,
@@ -2535,6 +2540,16 @@ static u8 bnx2x_bcm8726_set_limiting_mode(struct link_params *params,
         }
         limiting_mode = !(options[0] &
                           SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK);
+
+        bnx2x_cl45_read(bp, port,
+                      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
+                      ext_phy_addr,
+                      MDIO_PMA_DEVAD,
+                      MDIO_PMA_REG_ROM_VER2,
+                      &cur_limiting_mode);
+        DP(NETIF_MSG_LINK, "Current Limiting mode is 0x%x\n",
+                 cur_limiting_mode);
+
         if (limiting_mode &&
             (module_type != SFP_MODULE_TYPE_PASSIVE_COPPER_CABLE)) {
                 DP(NETIF_MSG_LINK,
@@ -2547,17 +2562,10 @@ static u8 bnx2x_bcm8726_set_limiting_mode(struct link_params *params,
                                MDIO_PMA_REG_ROM_VER2,
                                SFP_LIMITING_MODE_VALUE);
         } else { /* LRM mode ( default )*/
-                u16 cur_limiting_mode;
+
                 DP(NETIF_MSG_LINK, "Module options = 0x%x.Setting LRM MODE\n",
                          options[0]);
 
-                bnx2x_cl45_read(bp, port,
-                               PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
-                               ext_phy_addr,
-                               MDIO_PMA_DEVAD,
-                               MDIO_PMA_REG_ROM_VER2,
-                               &cur_limiting_mode);
-
                 /* Changing to LRM mode takes quite few seconds.
                 So do it only if current mode is limiting
                 ( default is LRM )*/
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index 8de80cca13d3..b8ce6fc927a0 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -5843,6 +5843,7 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_PMA_REG_ROM_VER2           0xca1a
 #define MDIO_PMA_REG_EDC_FFE_MAIN       0xca1b
 #define MDIO_PMA_REG_PLL_BANDWIDTH      0xca1d
+#define MDIO_PMA_REG_GEN_CTRL2          0xca1e
 #define MDIO_PMA_REG_MISC_CTRL0         0xca23
 #define MDIO_PMA_REG_LRM_MODE           0xca3f
 #define MDIO_PMA_REG_CDR_BANDWIDTH      0xca46