diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/wireless/Kconfig | 27 | ||||
-rw-r--r-- | drivers/net/wireless/Makefile | 2 | ||||
-rw-r--r-- | drivers/net/wireless/adm8211.c | 2063 | ||||
-rw-r--r-- | drivers/net/wireless/adm8211.h | 659 |
4 files changed, 2751 insertions, 0 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index ae27af0141c0..86480afe5351 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig | |||
@@ -558,6 +558,33 @@ config RTL8187 | |||
558 | 558 | ||
559 | Thanks to Realtek for their support! | 559 | Thanks to Realtek for their support! |
560 | 560 | ||
561 | config ADM8211 | ||
562 | tristate "ADMtek ADM8211 support" | ||
563 | depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL | ||
564 | select CRC32 | ||
565 | select EEPROM_93CX6 | ||
566 | ---help--- | ||
567 | This driver is for ADM8211A, ADM8211B, and ADM8211C based cards. | ||
568 | These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as: | ||
569 | |||
570 | Xterasys Cardbus XN-2411b | ||
571 | Blitz NetWave Point PC | ||
572 | TrendNet 221pc | ||
573 | Belkin F5D6001 | ||
574 | SMC 2635W | ||
575 | Linksys WPC11 v1 | ||
576 | Fiberline FL-WL-200X | ||
577 | 3com Office Connect (3CRSHPW796) | ||
578 | Corega WLPCIB-11 | ||
579 | SMC 2602W V2 EU | ||
580 | D-Link DWL-520 Revision C | ||
581 | |||
582 | However, some of these cards have been replaced with other chips | ||
583 | like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or | ||
584 | the Ralink RT2400 (SMC2635W) without a model number change. | ||
585 | |||
586 | Thanks to Infineon-ADMtek for their support of this driver. | ||
587 | |||
561 | source "drivers/net/wireless/hostap/Kconfig" | 588 | source "drivers/net/wireless/hostap/Kconfig" |
562 | source "drivers/net/wireless/bcm43xx/Kconfig" | 589 | source "drivers/net/wireless/bcm43xx/Kconfig" |
563 | source "drivers/net/wireless/zd1211rw/Kconfig" | 590 | source "drivers/net/wireless/zd1211rw/Kconfig" |
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 4eb6d9752881..e9bffdae0a04 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile | |||
@@ -47,3 +47,5 @@ obj-$(CONFIG_LIBERTAS) += libertas/ | |||
47 | 47 | ||
48 | rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o | 48 | rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o |
49 | obj-$(CONFIG_RTL8187) += rtl8187.o | 49 | obj-$(CONFIG_RTL8187) += rtl8187.o |
50 | |||
51 | obj-$(CONFIG_ADM8211) += adm8211.o | ||
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c new file mode 100644 index 000000000000..eec01fc15282 --- /dev/null +++ b/drivers/net/wireless/adm8211.c | |||
@@ -0,0 +1,2063 @@ | |||
1 | |||
2 | /* | ||
3 | * Linux device driver for ADMtek ADM8211 (IEEE 802.11b MAC/BBP) | ||
4 | * | ||
5 | * Copyright (c) 2003, Jouni Malinen <j@w1.fi> | ||
6 | * Copyright (c) 2004-2007, Michael Wu <flamingice@sourmilk.net> | ||
7 | * Some parts copyright (c) 2003 by David Young <dyoung@pobox.com> | ||
8 | * and used with permission. | ||
9 | * | ||
10 | * Much thanks to Infineon-ADMtek for their support of this driver. | ||
11 | * | ||
12 | * This program is free software; you can redistribute it and/or modify | ||
13 | * it under the terms of the GNU General Public License version 2 as | ||
14 | * published by the Free Software Foundation. See README and COPYING for | ||
15 | * more details. | ||
16 | */ | ||
17 | |||
18 | #include <linux/init.h> | ||
19 | #include <linux/if.h> | ||
20 | #include <linux/skbuff.h> | ||
21 | #include <linux/etherdevice.h> | ||
22 | #include <linux/pci.h> | ||
23 | #include <linux/delay.h> | ||
24 | #include <linux/crc32.h> | ||
25 | #include <linux/eeprom_93cx6.h> | ||
26 | #include <net/mac80211.h> | ||
27 | |||
28 | #include "adm8211.h" | ||
29 | |||
30 | MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); | ||
31 | MODULE_AUTHOR("Jouni Malinen <j@w1.fi>"); | ||
32 | MODULE_DESCRIPTION("Driver for IEEE 802.11b wireless cards based on ADMtek ADM8211"); | ||
33 | MODULE_SUPPORTED_DEVICE("ADM8211"); | ||
34 | MODULE_LICENSE("GPL"); | ||
35 | |||
36 | static unsigned int tx_ring_size __read_mostly = 16; | ||
37 | static unsigned int rx_ring_size __read_mostly = 16; | ||
38 | |||
39 | module_param(tx_ring_size, uint, 0); | ||
40 | module_param(rx_ring_size, uint, 0); | ||
41 | |||
42 | static const char version[] = KERN_INFO "adm8211: " | ||
43 | "Copyright 2003, Jouni Malinen <j@w1.fi>; " | ||
44 | "Copyright 2004-2007, Michael Wu <flamingice@sourmilk.net>\n"; | ||
45 | |||
46 | |||
47 | static struct pci_device_id adm8211_pci_id_table[] __devinitdata = { | ||
48 | /* ADMtek ADM8211 */ | ||
49 | { PCI_DEVICE(0x10B7, 0x6000) }, /* 3Com 3CRSHPW796 */ | ||
50 | { PCI_DEVICE(0x1200, 0x8201) }, /* ? */ | ||
51 | { PCI_DEVICE(0x1317, 0x8201) }, /* ADM8211A */ | ||
52 | { PCI_DEVICE(0x1317, 0x8211) }, /* ADM8211B/C */ | ||
53 | { 0 } | ||
54 | }; | ||
55 | |||
56 | static void adm8211_eeprom_register_read(struct eeprom_93cx6 *eeprom) | ||
57 | { | ||
58 | struct adm8211_priv *priv = eeprom->data; | ||
59 | u32 reg = ADM8211_CSR_READ(SPR); | ||
60 | |||
61 | eeprom->reg_data_in = reg & ADM8211_SPR_SDI; | ||
62 | eeprom->reg_data_out = reg & ADM8211_SPR_SDO; | ||
63 | eeprom->reg_data_clock = reg & ADM8211_SPR_SCLK; | ||
64 | eeprom->reg_chip_select = reg & ADM8211_SPR_SCS; | ||
65 | } | ||
66 | |||
67 | static void adm8211_eeprom_register_write(struct eeprom_93cx6 *eeprom) | ||
68 | { | ||
69 | struct adm8211_priv *priv = eeprom->data; | ||
70 | u32 reg = 0x4000 | ADM8211_SPR_SRS; | ||
71 | |||
72 | if (eeprom->reg_data_in) | ||
73 | reg |= ADM8211_SPR_SDI; | ||
74 | if (eeprom->reg_data_out) | ||
75 | reg |= ADM8211_SPR_SDO; | ||
76 | if (eeprom->reg_data_clock) | ||
77 | reg |= ADM8211_SPR_SCLK; | ||
78 | if (eeprom->reg_chip_select) | ||
79 | reg |= ADM8211_SPR_SCS; | ||
80 | |||
81 | ADM8211_CSR_WRITE(SPR, reg); | ||
82 | ADM8211_CSR_READ(SPR); /* eeprom_delay */ | ||
83 | } | ||
84 | |||
85 | static int adm8211_read_eeprom(struct ieee80211_hw *dev) | ||
86 | { | ||
87 | struct adm8211_priv *priv = dev->priv; | ||
88 | unsigned int words, i; | ||
89 | struct ieee80211_chan_range chan_range; | ||
90 | u16 cr49; | ||
91 | struct eeprom_93cx6 eeprom = { | ||
92 | .data = priv, | ||
93 | .register_read = adm8211_eeprom_register_read, | ||
94 | .register_write = adm8211_eeprom_register_write | ||
95 | }; | ||
96 | |||
97 | if (ADM8211_CSR_READ(CSR_TEST0) & ADM8211_CSR_TEST0_EPTYP) { | ||
98 | /* 256 * 16-bit = 512 bytes */ | ||
99 | eeprom.width = PCI_EEPROM_WIDTH_93C66; | ||
100 | words = 256; | ||
101 | } else { | ||
102 | /* 64 * 16-bit = 128 bytes */ | ||
103 | eeprom.width = PCI_EEPROM_WIDTH_93C46; | ||
104 | words = 64; | ||
105 | } | ||
106 | |||
107 | priv->eeprom_len = words * 2; | ||
108 | priv->eeprom = kmalloc(priv->eeprom_len, GFP_KERNEL); | ||
109 | if (!priv->eeprom) | ||
110 | return -ENOMEM; | ||
111 | |||
112 | eeprom_93cx6_multiread(&eeprom, 0, (__le16 __force *)priv->eeprom, words); | ||
113 | |||
114 | cr49 = le16_to_cpu(priv->eeprom->cr49); | ||
115 | priv->rf_type = (cr49 >> 3) & 0x7; | ||
116 | switch (priv->rf_type) { | ||
117 | case ADM8211_TYPE_INTERSIL: | ||
118 | case ADM8211_TYPE_RFMD: | ||
119 | case ADM8211_TYPE_MARVEL: | ||
120 | case ADM8211_TYPE_AIROHA: | ||
121 | case ADM8211_TYPE_ADMTEK: | ||
122 | break; | ||
123 | |||
124 | default: | ||
125 | if (priv->revid < ADM8211_REV_CA) | ||
126 | priv->rf_type = ADM8211_TYPE_RFMD; | ||
127 | else | ||
128 | priv->rf_type = ADM8211_TYPE_AIROHA; | ||
129 | |||
130 | printk(KERN_WARNING "%s (adm8211): Unknown RFtype %d\n", | ||
131 | pci_name(priv->pdev), (cr49 >> 3) & 0x7); | ||
132 | } | ||
133 | |||
134 | priv->bbp_type = cr49 & 0x7; | ||
135 | switch (priv->bbp_type) { | ||
136 | case ADM8211_TYPE_INTERSIL: | ||
137 | case ADM8211_TYPE_RFMD: | ||
138 | case ADM8211_TYPE_MARVEL: | ||
139 | case ADM8211_TYPE_AIROHA: | ||
140 | case ADM8211_TYPE_ADMTEK: | ||
141 | break; | ||
142 | default: | ||
143 | if (priv->revid < ADM8211_REV_CA) | ||
144 | priv->bbp_type = ADM8211_TYPE_RFMD; | ||
145 | else | ||
146 | priv->bbp_type = ADM8211_TYPE_ADMTEK; | ||
147 | |||
148 | printk(KERN_WARNING "%s (adm8211): Unknown BBPtype: %d\n", | ||
149 | pci_name(priv->pdev), cr49 >> 3); | ||
150 | } | ||
151 | |||
152 | if (priv->eeprom->country_code >= ARRAY_SIZE(cranges)) { | ||
153 | printk(KERN_WARNING "%s (adm8211): Invalid country code (%d)\n", | ||
154 | pci_name(priv->pdev), priv->eeprom->country_code); | ||
155 | |||
156 | chan_range = cranges[2]; | ||
157 | } else | ||
158 | chan_range = cranges[priv->eeprom->country_code]; | ||
159 | |||
160 | printk(KERN_DEBUG "%s (adm8211): Channel range: %d - %d\n", | ||
161 | pci_name(priv->pdev), (int)chan_range.min, (int)chan_range.max); | ||
162 | |||
163 | priv->modes[0].num_channels = chan_range.max - chan_range.min + 1; | ||
164 | priv->modes[0].channels = priv->channels; | ||
165 | |||
166 | memcpy(priv->channels, adm8211_channels, sizeof(adm8211_channels)); | ||
167 | |||
168 | for (i = 1; i <= ARRAY_SIZE(adm8211_channels); i++) | ||
169 | if (i >= chan_range.min && i <= chan_range.max) | ||
170 | priv->channels[i - 1].flag = | ||
171 | IEEE80211_CHAN_W_SCAN | | ||
172 | IEEE80211_CHAN_W_ACTIVE_SCAN | | ||
173 | IEEE80211_CHAN_W_IBSS; | ||
174 | |||
175 | switch (priv->eeprom->specific_bbptype) { | ||
176 | case ADM8211_BBP_RFMD3000: | ||
177 | case ADM8211_BBP_RFMD3002: | ||
178 | case ADM8211_BBP_ADM8011: | ||
179 | priv->specific_bbptype = priv->eeprom->specific_bbptype; | ||
180 | break; | ||
181 | |||
182 | default: | ||
183 | if (priv->revid < ADM8211_REV_CA) | ||
184 | priv->specific_bbptype = ADM8211_BBP_RFMD3000; | ||
185 | else | ||
186 | priv->specific_bbptype = ADM8211_BBP_ADM8011; | ||
187 | |||
188 | printk(KERN_WARNING "%s (adm8211): Unknown specific BBP: %d\n", | ||
189 | pci_name(priv->pdev), priv->eeprom->specific_bbptype); | ||
190 | } | ||
191 | |||
192 | switch (priv->eeprom->specific_rftype) { | ||
193 | case ADM8211_RFMD2948: | ||
194 | case ADM8211_RFMD2958: | ||
195 | case ADM8211_RFMD2958_RF3000_CONTROL_POWER: | ||
196 | case ADM8211_MAX2820: | ||
197 | case ADM8211_AL2210L: | ||
198 | priv->transceiver_type = priv->eeprom->specific_rftype; | ||
199 | break; | ||
200 | |||
201 | default: | ||
202 | if (priv->revid == ADM8211_REV_BA) | ||
203 | priv->transceiver_type = ADM8211_RFMD2958_RF3000_CONTROL_POWER; | ||
204 | else if (priv->revid == ADM8211_REV_CA) | ||
205 | priv->transceiver_type = ADM8211_AL2210L; | ||
206 | else if (priv->revid == ADM8211_REV_AB) | ||
207 | priv->transceiver_type = ADM8211_RFMD2948; | ||
208 | |||
209 | printk(KERN_WARNING "%s (adm8211): Unknown transceiver: %d\n", | ||
210 | pci_name(priv->pdev), priv->eeprom->specific_rftype); | ||
211 | |||
212 | break; | ||
213 | } | ||
214 | |||
215 | printk(KERN_DEBUG "%s (adm8211): RFtype=%d BBPtype=%d Specific BBP=%d " | ||
216 | "Transceiver=%d\n", pci_name(priv->pdev), priv->rf_type, | ||
217 | priv->bbp_type, priv->specific_bbptype, priv->transceiver_type); | ||
218 | |||
219 | return 0; | ||
220 | } | ||
221 | |||
222 | static inline void adm8211_write_sram(struct ieee80211_hw *dev, | ||
223 | u32 addr, u32 data) | ||
224 | { | ||
225 | struct adm8211_priv *priv = dev->priv; | ||
226 | |||
227 | ADM8211_CSR_WRITE(WEPCTL, addr | ADM8211_WEPCTL_TABLE_WR | | ||
228 | (priv->revid < ADM8211_REV_BA ? | ||
229 | 0 : ADM8211_WEPCTL_SEL_WEPTABLE )); | ||
230 | ADM8211_CSR_READ(WEPCTL); | ||
231 | msleep(1); | ||
232 | |||
233 | ADM8211_CSR_WRITE(WESK, data); | ||
234 | ADM8211_CSR_READ(WESK); | ||
235 | msleep(1); | ||
236 | } | ||
237 | |||
238 | static void adm8211_write_sram_bytes(struct ieee80211_hw *dev, | ||
239 | unsigned int addr, u8 *buf, | ||
240 | unsigned int len) | ||
241 | { | ||
242 | struct adm8211_priv *priv = dev->priv; | ||
243 | u32 reg = ADM8211_CSR_READ(WEPCTL); | ||
244 | unsigned int i; | ||
245 | |||
246 | if (priv->revid < ADM8211_REV_BA) { | ||
247 | for (i = 0; i < len; i += 2) { | ||
248 | u16 val = buf[i] | (buf[i + 1] << 8); | ||
249 | adm8211_write_sram(dev, addr + i / 2, val); | ||
250 | } | ||
251 | } else { | ||
252 | for (i = 0; i < len; i += 4) { | ||
253 | u32 val = (buf[i + 0] << 0 ) | (buf[i + 1] << 8 ) | | ||
254 | (buf[i + 2] << 16) | (buf[i + 3] << 24); | ||
255 | adm8211_write_sram(dev, addr + i / 4, val); | ||
256 | } | ||
257 | } | ||
258 | |||
259 | ADM8211_CSR_WRITE(WEPCTL, reg); | ||
260 | } | ||
261 | |||
262 | static void adm8211_clear_sram(struct ieee80211_hw *dev) | ||
263 | { | ||
264 | struct adm8211_priv *priv = dev->priv; | ||
265 | u32 reg = ADM8211_CSR_READ(WEPCTL); | ||
266 | unsigned int addr; | ||
267 | |||
268 | for (addr = 0; addr < ADM8211_SRAM_SIZE; addr++) | ||
269 | adm8211_write_sram(dev, addr, 0); | ||
270 | |||
271 | ADM8211_CSR_WRITE(WEPCTL, reg); | ||
272 | } | ||
273 | |||
274 | static int adm8211_get_stats(struct ieee80211_hw *dev, | ||
275 | struct ieee80211_low_level_stats *stats) | ||
276 | { | ||
277 | struct adm8211_priv *priv = dev->priv; | ||
278 | |||
279 | memcpy(stats, &priv->stats, sizeof(*stats)); | ||
280 | |||
281 | return 0; | ||
282 | } | ||
283 | |||
284 | static void adm8211_set_rx_mode(struct ieee80211_hw *dev, | ||
285 | unsigned short flags, int mc_count) | ||
286 | { | ||
287 | struct adm8211_priv *priv = dev->priv; | ||
288 | unsigned int bit_nr; | ||
289 | u32 mc_filter[2]; | ||
290 | struct dev_mc_list *mclist; | ||
291 | void *tmp; | ||
292 | |||
293 | if (flags & IFF_PROMISC) { | ||
294 | priv->nar |= ADM8211_NAR_PR; | ||
295 | priv->nar &= ~ADM8211_NAR_MM; | ||
296 | mc_filter[1] = mc_filter[0] = ~0; | ||
297 | } else if ((flags & IFF_ALLMULTI) || (mc_count > -1)) { | ||
298 | priv->nar &= ~ADM8211_NAR_PR; | ||
299 | priv->nar |= ADM8211_NAR_MM; | ||
300 | mc_filter[1] = mc_filter[0] = ~0; | ||
301 | } else { | ||
302 | priv->nar &= ~(ADM8211_NAR_MM | ADM8211_NAR_PR); | ||
303 | mc_filter[1] = mc_filter[0] = 0; | ||
304 | mclist = NULL; | ||
305 | while ((mclist = ieee80211_get_mc_list_item(dev, mclist, &tmp))) { | ||
306 | bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; | ||
307 | |||
308 | bit_nr &= 0x3F; | ||
309 | mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); | ||
310 | } | ||
311 | } | ||
312 | |||
313 | ADM8211_IDLE_RX(); | ||
314 | |||
315 | ADM8211_CSR_WRITE(MAR0, mc_filter[0]); | ||
316 | ADM8211_CSR_WRITE(MAR1, mc_filter[1]); | ||
317 | ADM8211_CSR_READ(NAR); | ||
318 | |||
319 | if (flags & IFF_PROMISC) | ||
320 | dev->flags |= IEEE80211_HW_RX_INCLUDES_FCS; | ||
321 | else | ||
322 | dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS; | ||
323 | |||
324 | ADM8211_RESTORE(); | ||
325 | } | ||
326 | |||
327 | static int adm8211_get_tx_stats(struct ieee80211_hw *dev, | ||
328 | struct ieee80211_tx_queue_stats *stats) | ||
329 | { | ||
330 | struct adm8211_priv *priv = dev->priv; | ||
331 | struct ieee80211_tx_queue_stats_data *data = &stats->data[0]; | ||
332 | |||
333 | data->len = priv->cur_tx - priv->dirty_tx; | ||
334 | data->limit = priv->tx_ring_size - 2; | ||
335 | data->count = priv->dirty_tx; | ||
336 | |||
337 | return 0; | ||
338 | } | ||
339 | |||
340 | static void adm8211_interrupt_tci(struct ieee80211_hw *dev) | ||
341 | { | ||
342 | struct adm8211_priv *priv = dev->priv; | ||
343 | unsigned int dirty_tx; | ||
344 | |||
345 | spin_lock(&priv->lock); | ||
346 | |||
347 | for (dirty_tx = priv->dirty_tx; priv->cur_tx - dirty_tx; dirty_tx++) { | ||
348 | unsigned int entry = dirty_tx % priv->tx_ring_size; | ||
349 | u32 status = le32_to_cpu(priv->tx_ring[entry].status); | ||
350 | struct adm8211_tx_ring_info *info; | ||
351 | struct sk_buff *skb; | ||
352 | |||
353 | if (status & TDES0_CONTROL_OWN || | ||
354 | !(status & TDES0_CONTROL_DONE)) | ||
355 | break; | ||
356 | |||
357 | info = &priv->tx_buffers[entry]; | ||
358 | skb = info->skb; | ||
359 | |||
360 | /* TODO: check TDES0_STATUS_TUF and TDES0_STATUS_TRO */ | ||
361 | |||
362 | pci_unmap_single(priv->pdev, info->mapping, | ||
363 | info->skb->len, PCI_DMA_TODEVICE); | ||
364 | |||
365 | if (info->tx_control.flags & IEEE80211_TXCTL_REQ_TX_STATUS) { | ||
366 | struct ieee80211_tx_status tx_status = {{0}}; | ||
367 | struct ieee80211_hdr *hdr; | ||
368 | size_t hdrlen = info->hdrlen; | ||
369 | |||
370 | skb_pull(skb, sizeof(struct adm8211_tx_hdr)); | ||
371 | hdr = (struct ieee80211_hdr *)skb_push(skb, hdrlen); | ||
372 | memcpy(hdr, skb->cb, hdrlen); | ||
373 | memcpy(&tx_status.control, &info->tx_control, | ||
374 | sizeof(tx_status.control)); | ||
375 | if (!(status & TDES0_STATUS_ES)) | ||
376 | tx_status.flags |= IEEE80211_TX_STATUS_ACK; | ||
377 | ieee80211_tx_status_irqsafe(dev, skb, &tx_status); | ||
378 | } else | ||
379 | dev_kfree_skb_irq(skb); | ||
380 | info->skb = NULL; | ||
381 | } | ||
382 | |||
383 | if (priv->cur_tx - dirty_tx < priv->tx_ring_size - 2) | ||
384 | ieee80211_wake_queue(dev, 0); | ||
385 | |||
386 | priv->dirty_tx = dirty_tx; | ||
387 | spin_unlock(&priv->lock); | ||
388 | } | ||
389 | |||
390 | |||
391 | static void adm8211_interrupt_rci(struct ieee80211_hw *dev) | ||
392 | { | ||
393 | struct adm8211_priv *priv = dev->priv; | ||
394 | unsigned int entry = priv->cur_rx % priv->rx_ring_size; | ||
395 | u32 status; | ||
396 | unsigned int pktlen; | ||
397 | struct sk_buff *skb, *newskb; | ||
398 | unsigned int limit = priv->rx_ring_size; | ||
399 | static const u8 rate_tbl[] = {10, 20, 55, 110, 220}; | ||
400 | u8 rssi, rate; | ||
401 | |||
402 | while (!(priv->rx_ring[entry].status & cpu_to_le32(RDES0_STATUS_OWN))) { | ||
403 | if (!limit--) | ||
404 | break; | ||
405 | |||
406 | status = le32_to_cpu(priv->rx_ring[entry].status); | ||
407 | rate = (status & RDES0_STATUS_RXDR) >> 12; | ||
408 | rssi = le32_to_cpu(priv->rx_ring[entry].length) & | ||
409 | RDES1_STATUS_RSSI; | ||
410 | |||
411 | pktlen = status & RDES0_STATUS_FL; | ||
412 | if (pktlen > RX_PKT_SIZE) { | ||
413 | if (net_ratelimit()) | ||
414 | printk(KERN_DEBUG "%s: frame too long (%d)\n", | ||
415 | wiphy_name(dev->wiphy), pktlen); | ||
416 | pktlen = RX_PKT_SIZE; | ||
417 | } | ||
418 | |||
419 | if (!priv->soft_rx_crc && status & RDES0_STATUS_ES) { | ||
420 | skb = NULL; /* old buffer will be reused */ | ||
421 | /* TODO: update RX error stats */ | ||
422 | /* TODO: check RDES0_STATUS_CRC*E */ | ||
423 | } else if (pktlen < RX_COPY_BREAK) { | ||
424 | skb = dev_alloc_skb(pktlen); | ||
425 | if (skb) { | ||
426 | pci_dma_sync_single_for_cpu( | ||
427 | priv->pdev, | ||
428 | priv->rx_buffers[entry].mapping, | ||
429 | pktlen, PCI_DMA_FROMDEVICE); | ||
430 | memcpy(skb_put(skb, pktlen), | ||
431 | skb_tail_pointer(priv->rx_buffers[entry].skb), | ||
432 | pktlen); | ||
433 | pci_dma_sync_single_for_device( | ||
434 | priv->pdev, | ||
435 | priv->rx_buffers[entry].mapping, | ||
436 | RX_PKT_SIZE, PCI_DMA_FROMDEVICE); | ||
437 | } | ||
438 | } else { | ||
439 | newskb = dev_alloc_skb(RX_PKT_SIZE); | ||
440 | if (newskb) { | ||
441 | skb = priv->rx_buffers[entry].skb; | ||
442 | skb_put(skb, pktlen); | ||
443 | pci_unmap_single( | ||
444 | priv->pdev, | ||
445 | priv->rx_buffers[entry].mapping, | ||
446 | RX_PKT_SIZE, PCI_DMA_FROMDEVICE); | ||
447 | priv->rx_buffers[entry].skb = newskb; | ||
448 | priv->rx_buffers[entry].mapping = | ||
449 | pci_map_single(priv->pdev, | ||
450 | skb_tail_pointer(newskb), | ||
451 | RX_PKT_SIZE, | ||
452 | PCI_DMA_FROMDEVICE); | ||
453 | } else { | ||
454 | skb = NULL; | ||
455 | /* TODO: update rx dropped stats */ | ||
456 | } | ||
457 | |||
458 | priv->rx_ring[entry].buffer1 = | ||
459 | cpu_to_le32(priv->rx_buffers[entry].mapping); | ||
460 | } | ||
461 | |||
462 | priv->rx_ring[entry].status = cpu_to_le32(RDES0_STATUS_OWN | | ||
463 | RDES0_STATUS_SQL); | ||
464 | priv->rx_ring[entry].length = | ||
465 | cpu_to_le32(RX_PKT_SIZE | | ||
466 | (entry == priv->rx_ring_size - 1 ? | ||
467 | RDES1_CONTROL_RER : 0)); | ||
468 | |||
469 | if (skb) { | ||
470 | struct ieee80211_rx_status rx_status = {0}; | ||
471 | |||
472 | if (priv->revid < ADM8211_REV_CA) | ||
473 | rx_status.ssi = rssi; | ||
474 | else | ||
475 | rx_status.ssi = 100 - rssi; | ||
476 | |||
477 | if (rate <= 4) | ||
478 | rx_status.rate = rate_tbl[rate]; | ||
479 | |||
480 | rx_status.channel = priv->channel; | ||
481 | rx_status.freq = adm8211_channels[priv->channel - 1].freq; | ||
482 | rx_status.phymode = MODE_IEEE80211B; | ||
483 | |||
484 | ieee80211_rx_irqsafe(dev, skb, &rx_status); | ||
485 | } | ||
486 | |||
487 | entry = (++priv->cur_rx) % priv->rx_ring_size; | ||
488 | } | ||
489 | |||
490 | /* TODO: check LPC and update stats? */ | ||
491 | } | ||
492 | |||
493 | |||
494 | static irqreturn_t adm8211_interrupt(int irq, void *dev_id) | ||
495 | { | ||
496 | #define ADM8211_INT(x) \ | ||
497 | do { \ | ||
498 | if (unlikely(stsr & ADM8211_STSR_ ## x)) \ | ||
499 | printk(KERN_DEBUG "%s: " #x "\n", wiphy_name(dev->wiphy)); \ | ||
500 | } while (0) | ||
501 | |||
502 | struct ieee80211_hw *dev = dev_id; | ||
503 | struct adm8211_priv *priv = dev->priv; | ||
504 | unsigned int count = 0; | ||
505 | u32 stsr; | ||
506 | |||
507 | do { | ||
508 | stsr = ADM8211_CSR_READ(STSR); | ||
509 | ADM8211_CSR_WRITE(STSR, stsr); | ||
510 | if (stsr == 0xffffffff) | ||
511 | return IRQ_HANDLED; | ||
512 | |||
513 | if (!(stsr & (ADM8211_STSR_NISS | ADM8211_STSR_AISS))) | ||
514 | break; | ||
515 | |||
516 | if (stsr & ADM8211_STSR_RCI) | ||
517 | adm8211_interrupt_rci(dev); | ||
518 | if (stsr & ADM8211_STSR_TCI) | ||
519 | adm8211_interrupt_tci(dev); | ||
520 | |||
521 | /*ADM8211_INT(LinkOn);*/ | ||
522 | /*ADM8211_INT(LinkOff);*/ | ||
523 | |||
524 | ADM8211_INT(PCF); | ||
525 | ADM8211_INT(BCNTC); | ||
526 | ADM8211_INT(GPINT); | ||
527 | ADM8211_INT(ATIMTC); | ||
528 | ADM8211_INT(TSFTF); | ||
529 | ADM8211_INT(TSCZ); | ||
530 | ADM8211_INT(SQL); | ||
531 | ADM8211_INT(WEPTD); | ||
532 | ADM8211_INT(ATIME); | ||
533 | /*ADM8211_INT(TBTT);*/ | ||
534 | ADM8211_INT(TEIS); | ||
535 | ADM8211_INT(FBE); | ||
536 | ADM8211_INT(REIS); | ||
537 | ADM8211_INT(GPTT); | ||
538 | ADM8211_INT(RPS); | ||
539 | ADM8211_INT(RDU); | ||
540 | ADM8211_INT(TUF); | ||
541 | /*ADM8211_INT(TRT);*/ | ||
542 | /*ADM8211_INT(TLT);*/ | ||
543 | /*ADM8211_INT(TDU);*/ | ||
544 | ADM8211_INT(TPS); | ||
545 | |||
546 | } while (count++ < 20); | ||
547 | |||
548 | return IRQ_RETVAL(count); | ||
549 | |||
550 | #undef ADM8211_INT | ||
551 | } | ||
552 | |||
553 | #define WRITE_SYN(name,v_mask,v_shift,a_mask,a_shift,bits,prewrite,postwrite)\ | ||
554 | static void adm8211_rf_write_syn_ ## name (struct ieee80211_hw *dev, \ | ||
555 | u16 addr, u32 value) { \ | ||
556 | struct adm8211_priv *priv = dev->priv; \ | ||
557 | unsigned int i; \ | ||
558 | u32 reg, bitbuf; \ | ||
559 | \ | ||
560 | value &= v_mask; \ | ||
561 | addr &= a_mask; \ | ||
562 | bitbuf = (value << v_shift) | (addr << a_shift); \ | ||
563 | \ | ||
564 | ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_IF_SELECT_1); \ | ||
565 | ADM8211_CSR_READ(SYNRF); \ | ||
566 | ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_IF_SELECT_0); \ | ||
567 | ADM8211_CSR_READ(SYNRF); \ | ||
568 | \ | ||
569 | if (prewrite) { \ | ||
570 | ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_WRITE_SYNDATA_0); \ | ||
571 | ADM8211_CSR_READ(SYNRF); \ | ||
572 | } \ | ||
573 | \ | ||
574 | for (i = 0; i <= bits; i++) { \ | ||
575 | if (bitbuf & (1 << (bits - i))) \ | ||
576 | reg = ADM8211_SYNRF_WRITE_SYNDATA_1; \ | ||
577 | else \ | ||
578 | reg = ADM8211_SYNRF_WRITE_SYNDATA_0; \ | ||
579 | \ | ||
580 | ADM8211_CSR_WRITE(SYNRF, reg); \ | ||
581 | ADM8211_CSR_READ(SYNRF); \ | ||
582 | \ | ||
583 | ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_WRITE_CLOCK_1); \ | ||
584 | ADM8211_CSR_READ(SYNRF); \ | ||
585 | ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_WRITE_CLOCK_0); \ | ||
586 | ADM8211_CSR_READ(SYNRF); \ | ||
587 | } \ | ||
588 | \ | ||
589 | if (postwrite == 1) { \ | ||
590 | ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_IF_SELECT_0); \ | ||
591 | ADM8211_CSR_READ(SYNRF); \ | ||
592 | } \ | ||
593 | if (postwrite == 2) { \ | ||
594 | ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_IF_SELECT_1); \ | ||
595 | ADM8211_CSR_READ(SYNRF); \ | ||
596 | } \ | ||
597 | \ | ||
598 | ADM8211_CSR_WRITE(SYNRF, 0); \ | ||
599 | ADM8211_CSR_READ(SYNRF); \ | ||
600 | } | ||
601 | |||
602 | WRITE_SYN(max2820, 0x00FFF, 0, 0x0F, 12, 15, 1, 1) | ||
603 | WRITE_SYN(al2210l, 0xFFFFF, 4, 0x0F, 0, 23, 1, 1) | ||
604 | WRITE_SYN(rfmd2958, 0x3FFFF, 0, 0x1F, 18, 23, 0, 1) | ||
605 | WRITE_SYN(rfmd2948, 0x0FFFF, 4, 0x0F, 0, 21, 0, 2) | ||
606 | |||
607 | #undef WRITE_SYN | ||
608 | |||
609 | static int adm8211_write_bbp(struct ieee80211_hw *dev, u8 addr, u8 data) | ||
610 | { | ||
611 | struct adm8211_priv *priv = dev->priv; | ||
612 | unsigned int timeout; | ||
613 | u32 reg; | ||
614 | |||
615 | timeout = 10; | ||
616 | while (timeout > 0) { | ||
617 | reg = ADM8211_CSR_READ(BBPCTL); | ||
618 | if (!(reg & (ADM8211_BBPCTL_WR | ADM8211_BBPCTL_RD))) | ||
619 | break; | ||
620 | timeout--; | ||
621 | msleep(2); | ||
622 | } | ||
623 | |||
624 | if (timeout == 0) { | ||
625 | printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed" | ||
626 | " prewrite (reg=0x%08x)\n", | ||
627 | wiphy_name(dev->wiphy), addr, data, reg); | ||
628 | return -ETIMEDOUT; | ||
629 | } | ||
630 | |||
631 | switch (priv->bbp_type) { | ||
632 | case ADM8211_TYPE_INTERSIL: | ||
633 | reg = ADM8211_BBPCTL_MMISEL; /* three wire interface */ | ||
634 | break; | ||
635 | case ADM8211_TYPE_RFMD: | ||
636 | reg = (0x20 << 24) | ADM8211_BBPCTL_TXCE | ADM8211_BBPCTL_CCAP | | ||
637 | (0x01 << 18); | ||
638 | break; | ||
639 | case ADM8211_TYPE_ADMTEK: | ||
640 | reg = (0x20 << 24) | ADM8211_BBPCTL_TXCE | ADM8211_BBPCTL_CCAP | | ||
641 | (0x05 << 18); | ||
642 | break; | ||
643 | } | ||
644 | reg |= ADM8211_BBPCTL_WR | (addr << 8) | data; | ||
645 | |||
646 | ADM8211_CSR_WRITE(BBPCTL, reg); | ||
647 | |||
648 | timeout = 10; | ||
649 | while (timeout > 0) { | ||
650 | reg = ADM8211_CSR_READ(BBPCTL); | ||
651 | if (!(reg & ADM8211_BBPCTL_WR)) | ||
652 | break; | ||
653 | timeout--; | ||
654 | msleep(2); | ||
655 | } | ||
656 | |||
657 | if (timeout == 0) { | ||
658 | ADM8211_CSR_WRITE(BBPCTL, ADM8211_CSR_READ(BBPCTL) & | ||
659 | ~ADM8211_BBPCTL_WR); | ||
660 | printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed" | ||
661 | " postwrite (reg=0x%08x)\n", | ||
662 | wiphy_name(dev->wiphy), addr, data, reg); | ||
663 | return -ETIMEDOUT; | ||
664 | } | ||
665 | |||
666 | return 0; | ||
667 | } | ||
668 | |||
669 | static int adm8211_rf_set_channel(struct ieee80211_hw *dev, unsigned int chan) | ||
670 | { | ||
671 | static const u32 adm8211_rfmd2958_reg5[] = | ||
672 | {0x22BD, 0x22D2, 0x22E8, 0x22FE, 0x2314, 0x232A, 0x2340, | ||
673 | 0x2355, 0x236B, 0x2381, 0x2397, 0x23AD, 0x23C2, 0x23F7}; | ||
674 | static const u32 adm8211_rfmd2958_reg6[] = | ||
675 | {0x05D17, 0x3A2E8, 0x2E8BA, 0x22E8B, 0x1745D, 0x0BA2E, 0x00000, | ||
676 | 0x345D1, 0x28BA2, 0x1D174, 0x11745, 0x05D17, 0x3A2E8, 0x11745}; | ||
677 | |||
678 | struct adm8211_priv *priv = dev->priv; | ||
679 | u8 ant_power = priv->ant_power > 0x3F ? | ||
680 | priv->eeprom->antenna_power[chan - 1] : priv->ant_power; | ||
681 | u8 tx_power = priv->tx_power > 0x3F ? | ||
682 | priv->eeprom->tx_power[chan - 1] : priv->tx_power; | ||
683 | u8 lpf_cutoff = priv->lpf_cutoff == 0xFF ? | ||
684 | priv->eeprom->lpf_cutoff[chan - 1] : priv->lpf_cutoff; | ||
685 | u8 lnags_thresh = priv->lnags_threshold == 0xFF ? | ||
686 | priv->eeprom->lnags_threshold[chan - 1] : priv->lnags_threshold; | ||
687 | u32 reg; | ||
688 | |||
689 | ADM8211_IDLE(); | ||
690 | |||
691 | /* Program synthesizer to new channel */ | ||
692 | switch (priv->transceiver_type) { | ||
693 | case ADM8211_RFMD2958: | ||
694 | case ADM8211_RFMD2958_RF3000_CONTROL_POWER: | ||
695 | adm8211_rf_write_syn_rfmd2958(dev, 0x00, 0x04007); | ||
696 | adm8211_rf_write_syn_rfmd2958(dev, 0x02, 0x00033); | ||
697 | |||
698 | adm8211_rf_write_syn_rfmd2958(dev, 0x05, | ||
699 | adm8211_rfmd2958_reg5[chan - 1]); | ||
700 | adm8211_rf_write_syn_rfmd2958(dev, 0x06, | ||
701 | adm8211_rfmd2958_reg6[chan - 1]); | ||
702 | break; | ||
703 | |||
704 | case ADM8211_RFMD2948: | ||
705 | adm8211_rf_write_syn_rfmd2948(dev, SI4126_MAIN_CONF, | ||
706 | SI4126_MAIN_XINDIV2); | ||
707 | adm8211_rf_write_syn_rfmd2948(dev, SI4126_POWERDOWN, | ||
708 | SI4126_POWERDOWN_PDIB | | ||
709 | SI4126_POWERDOWN_PDRB); | ||
710 | adm8211_rf_write_syn_rfmd2948(dev, SI4126_PHASE_DET_GAIN, 0); | ||
711 | adm8211_rf_write_syn_rfmd2948(dev, SI4126_RF2_N_DIV, | ||
712 | (chan == 14 ? | ||
713 | 2110 : (2033 + (chan * 5)))); | ||
714 | adm8211_rf_write_syn_rfmd2948(dev, SI4126_IF_N_DIV, 1496); | ||
715 | adm8211_rf_write_syn_rfmd2948(dev, SI4126_RF2_R_DIV, 44); | ||
716 | adm8211_rf_write_syn_rfmd2948(dev, SI4126_IF_R_DIV, 44); | ||
717 | break; | ||
718 | |||
719 | case ADM8211_MAX2820: | ||
720 | adm8211_rf_write_syn_max2820(dev, 0x3, | ||
721 | (chan == 14 ? 0x054 : (0x7 + (chan * 5)))); | ||
722 | break; | ||
723 | |||
724 | case ADM8211_AL2210L: | ||
725 | adm8211_rf_write_syn_al2210l(dev, 0x0, | ||
726 | (chan == 14 ? 0x229B4 : (0x22967 + (chan * 5)))); | ||
727 | break; | ||
728 | |||
729 | default: | ||
730 | printk(KERN_DEBUG "%s: unsupported transceiver type %d\n", | ||
731 | wiphy_name(dev->wiphy), priv->transceiver_type); | ||
732 | break; | ||
733 | } | ||
734 | |||
735 | /* write BBP regs */ | ||
736 | if (priv->bbp_type == ADM8211_TYPE_RFMD) { | ||
737 | |||
738 | /* SMC 2635W specific? adm8211b doesn't use the 2948 though.. */ | ||
739 | /* TODO: remove if SMC 2635W doesn't need this */ | ||
740 | if (priv->transceiver_type == ADM8211_RFMD2948) { | ||
741 | reg = ADM8211_CSR_READ(GPIO); | ||
742 | reg &= 0xfffc0000; | ||
743 | reg |= ADM8211_CSR_GPIO_EN0; | ||
744 | if (chan != 14) | ||
745 | reg |= ADM8211_CSR_GPIO_O0; | ||
746 | ADM8211_CSR_WRITE(GPIO, reg); | ||
747 | } | ||
748 | |||
749 | if (priv->transceiver_type == ADM8211_RFMD2958) { | ||
750 | /* set PCNT2 */ | ||
751 | adm8211_rf_write_syn_rfmd2958(dev, 0x0B, 0x07100); | ||
752 | /* set PCNT1 P_DESIRED/MID_BIAS */ | ||
753 | reg = le16_to_cpu(priv->eeprom->cr49); | ||
754 | reg >>= 13; | ||
755 | reg <<= 15; | ||
756 | reg |= ant_power << 9; | ||
757 | adm8211_rf_write_syn_rfmd2958(dev, 0x0A, reg); | ||
758 | /* set TXRX TX_GAIN */ | ||
759 | adm8211_rf_write_syn_rfmd2958(dev, 0x09, 0x00050 | | ||
760 | (priv->revid < ADM8211_REV_CA ? tx_power : 0)); | ||
761 | } else { | ||
762 | reg = ADM8211_CSR_READ(PLCPHD); | ||
763 | reg &= 0xff00ffff; | ||
764 | reg |= tx_power << 18; | ||
765 | ADM8211_CSR_WRITE(PLCPHD, reg); | ||
766 | } | ||
767 | |||
768 | ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_SELRF | | ||
769 | ADM8211_SYNRF_PE1 | ADM8211_SYNRF_PHYRST); | ||
770 | ADM8211_CSR_READ(SYNRF); | ||
771 | msleep(30); | ||
772 | |||
773 | /* RF3000 BBP */ | ||
774 | if (priv->transceiver_type != ADM8211_RFMD2958) | ||
775 | adm8211_write_bbp(dev, RF3000_TX_VAR_GAIN__TX_LEN_EXT, | ||
776 | tx_power<<2); | ||
777 | adm8211_write_bbp(dev, RF3000_LOW_GAIN_CALIB, lpf_cutoff); | ||
778 | adm8211_write_bbp(dev, RF3000_HIGH_GAIN_CALIB, lnags_thresh); | ||
779 | adm8211_write_bbp(dev, 0x1c, priv->revid == ADM8211_REV_BA ? | ||
780 | priv->eeprom->cr28 : 0); | ||
781 | adm8211_write_bbp(dev, 0x1d, priv->eeprom->cr29); | ||
782 | |||
783 | ADM8211_CSR_WRITE(SYNRF, 0); | ||
784 | |||
785 | /* Nothing to do for ADMtek BBP */ | ||
786 | } else if (priv->bbp_type != ADM8211_TYPE_ADMTEK) | ||
787 | printk(KERN_DEBUG "%s: unsupported BBP type %d\n", | ||
788 | wiphy_name(dev->wiphy), priv->bbp_type); | ||
789 | |||
790 | ADM8211_RESTORE(); | ||
791 | |||
792 | /* update current channel for adhoc (and maybe AP mode) */ | ||
793 | reg = ADM8211_CSR_READ(CAP0); | ||
794 | reg &= ~0xF; | ||
795 | reg |= chan; | ||
796 | ADM8211_CSR_WRITE(CAP0, reg); | ||
797 | |||
798 | return 0; | ||
799 | } | ||
800 | |||
801 | static void adm8211_update_mode(struct ieee80211_hw *dev) | ||
802 | { | ||
803 | struct adm8211_priv *priv = dev->priv; | ||
804 | |||
805 | ADM8211_IDLE(); | ||
806 | |||
807 | priv->soft_rx_crc = 0; | ||
808 | switch (priv->mode) { | ||
809 | case IEEE80211_IF_TYPE_STA: | ||
810 | priv->nar &= ~(ADM8211_NAR_PR | ADM8211_NAR_EA); | ||
811 | priv->nar |= ADM8211_NAR_ST | ADM8211_NAR_SR; | ||
812 | break; | ||
813 | case IEEE80211_IF_TYPE_IBSS: | ||
814 | priv->nar &= ~ADM8211_NAR_PR; | ||
815 | priv->nar |= ADM8211_NAR_EA | ADM8211_NAR_ST | ADM8211_NAR_SR; | ||
816 | |||
817 | /* don't trust the error bits on rev 0x20 and up in adhoc */ | ||
818 | if (priv->revid >= ADM8211_REV_BA) | ||
819 | priv->soft_rx_crc = 1; | ||
820 | break; | ||
821 | case IEEE80211_IF_TYPE_MNTR: | ||
822 | priv->nar &= ~(ADM8211_NAR_EA | ADM8211_NAR_ST); | ||
823 | priv->nar |= ADM8211_NAR_PR | ADM8211_NAR_SR; | ||
824 | break; | ||
825 | } | ||
826 | |||
827 | ADM8211_RESTORE(); | ||
828 | } | ||
829 | |||
830 | static void adm8211_hw_init_syn(struct ieee80211_hw *dev) | ||
831 | { | ||
832 | struct adm8211_priv *priv = dev->priv; | ||
833 | |||
834 | switch (priv->transceiver_type) { | ||
835 | case ADM8211_RFMD2958: | ||
836 | case ADM8211_RFMD2958_RF3000_CONTROL_POWER: | ||
837 | /* comments taken from ADMtek vendor driver */ | ||
838 | |||
839 | /* Reset RF2958 after power on */ | ||
840 | adm8211_rf_write_syn_rfmd2958(dev, 0x1F, 0x00000); | ||
841 | /* Initialize RF VCO Core Bias to maximum */ | ||
842 | adm8211_rf_write_syn_rfmd2958(dev, 0x0C, 0x3001F); | ||
843 | /* Initialize IF PLL */ | ||
844 | adm8211_rf_write_syn_rfmd2958(dev, 0x01, 0x29C03); | ||
845 | /* Initialize IF PLL Coarse Tuning */ | ||
846 | adm8211_rf_write_syn_rfmd2958(dev, 0x03, 0x1FF6F); | ||
847 | /* Initialize RF PLL */ | ||
848 | adm8211_rf_write_syn_rfmd2958(dev, 0x04, 0x29403); | ||
849 | /* Initialize RF PLL Coarse Tuning */ | ||
850 | adm8211_rf_write_syn_rfmd2958(dev, 0x07, 0x1456F); | ||
851 | /* Initialize TX gain and filter BW (R9) */ | ||
852 | adm8211_rf_write_syn_rfmd2958(dev, 0x09, | ||
853 | (priv->transceiver_type == ADM8211_RFMD2958 ? | ||
854 | 0x10050 : 0x00050)); | ||
855 | /* Initialize CAL register */ | ||
856 | adm8211_rf_write_syn_rfmd2958(dev, 0x08, 0x3FFF8); | ||
857 | break; | ||
858 | |||
859 | case ADM8211_MAX2820: | ||
860 | adm8211_rf_write_syn_max2820(dev, 0x1, 0x01E); | ||
861 | adm8211_rf_write_syn_max2820(dev, 0x2, 0x001); | ||
862 | adm8211_rf_write_syn_max2820(dev, 0x3, 0x054); | ||
863 | adm8211_rf_write_syn_max2820(dev, 0x4, 0x310); | ||
864 | adm8211_rf_write_syn_max2820(dev, 0x5, 0x000); | ||
865 | break; | ||
866 | |||
867 | case ADM8211_AL2210L: | ||
868 | adm8211_rf_write_syn_al2210l(dev, 0x0, 0x0196C); | ||
869 | adm8211_rf_write_syn_al2210l(dev, 0x1, 0x007CB); | ||
870 | adm8211_rf_write_syn_al2210l(dev, 0x2, 0x3582F); | ||
871 | adm8211_rf_write_syn_al2210l(dev, 0x3, 0x010A9); | ||
872 | adm8211_rf_write_syn_al2210l(dev, 0x4, 0x77280); | ||
873 | adm8211_rf_write_syn_al2210l(dev, 0x5, 0x45641); | ||
874 | adm8211_rf_write_syn_al2210l(dev, 0x6, 0xEA130); | ||
875 | adm8211_rf_write_syn_al2210l(dev, 0x7, 0x80000); | ||
876 | adm8211_rf_write_syn_al2210l(dev, 0x8, 0x7850F); | ||
877 | adm8211_rf_write_syn_al2210l(dev, 0x9, 0xF900C); | ||
878 | adm8211_rf_write_syn_al2210l(dev, 0xA, 0x00000); | ||
879 | adm8211_rf_write_syn_al2210l(dev, 0xB, 0x00000); | ||
880 | break; | ||
881 | |||
882 | case ADM8211_RFMD2948: | ||
883 | default: | ||
884 | break; | ||
885 | } | ||
886 | } | ||
887 | |||
888 | static int adm8211_hw_init_bbp(struct ieee80211_hw *dev) | ||
889 | { | ||
890 | struct adm8211_priv *priv = dev->priv; | ||
891 | u32 reg; | ||
892 | |||
893 | /* write addresses */ | ||
894 | if (priv->bbp_type == ADM8211_TYPE_INTERSIL) { | ||
895 | ADM8211_CSR_WRITE(MMIWA, 0x100E0C0A); | ||
896 | ADM8211_CSR_WRITE(MMIRD0, 0x00007C7E); | ||
897 | ADM8211_CSR_WRITE(MMIRD1, 0x00100000); | ||
898 | } else if (priv->bbp_type == ADM8211_TYPE_RFMD || | ||
899 | priv->bbp_type == ADM8211_TYPE_ADMTEK) { | ||
900 | /* check specific BBP type */ | ||
901 | switch (priv->specific_bbptype) { | ||
902 | case ADM8211_BBP_RFMD3000: | ||
903 | case ADM8211_BBP_RFMD3002: | ||
904 | ADM8211_CSR_WRITE(MMIWA, 0x00009101); | ||
905 | ADM8211_CSR_WRITE(MMIRD0, 0x00000301); | ||
906 | break; | ||
907 | |||
908 | case ADM8211_BBP_ADM8011: | ||
909 | ADM8211_CSR_WRITE(MMIWA, 0x00008903); | ||
910 | ADM8211_CSR_WRITE(MMIRD0, 0x00001716); | ||
911 | |||
912 | reg = ADM8211_CSR_READ(BBPCTL); | ||
913 | reg &= ~ADM8211_BBPCTL_TYPE; | ||
914 | reg |= 0x5 << 18; | ||
915 | ADM8211_CSR_WRITE(BBPCTL, reg); | ||
916 | break; | ||
917 | } | ||
918 | |||
919 | switch (priv->revid) { | ||
920 | case ADM8211_REV_CA: | ||
921 | if (priv->transceiver_type == ADM8211_RFMD2958 || | ||
922 | priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER || | ||
923 | priv->transceiver_type == ADM8211_RFMD2948) | ||
924 | ADM8211_CSR_WRITE(SYNCTL, 0x1 << 22); | ||
925 | else if (priv->transceiver_type == ADM8211_MAX2820 || | ||
926 | priv->transceiver_type == ADM8211_AL2210L) | ||
927 | ADM8211_CSR_WRITE(SYNCTL, 0x3 << 22); | ||
928 | break; | ||
929 | |||
930 | case ADM8211_REV_BA: | ||
931 | reg = ADM8211_CSR_READ(MMIRD1); | ||
932 | reg &= 0x0000FFFF; | ||
933 | reg |= 0x7e100000; | ||
934 | ADM8211_CSR_WRITE(MMIRD1, reg); | ||
935 | break; | ||
936 | |||
937 | case ADM8211_REV_AB: | ||
938 | case ADM8211_REV_AF: | ||
939 | default: | ||
940 | ADM8211_CSR_WRITE(MMIRD1, 0x7e100000); | ||
941 | break; | ||
942 | } | ||
943 | |||
944 | /* For RFMD */ | ||
945 | ADM8211_CSR_WRITE(MACTEST, 0x800); | ||
946 | } | ||
947 | |||
948 | adm8211_hw_init_syn(dev); | ||
949 | |||
950 | /* Set RF Power control IF pin to PE1+PHYRST# */ | ||
951 | ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_SELRF | | ||
952 | ADM8211_SYNRF_PE1 | ADM8211_SYNRF_PHYRST); | ||
953 | ADM8211_CSR_READ(SYNRF); | ||
954 | msleep(20); | ||
955 | |||
956 | /* write BBP regs */ | ||
957 | if (priv->bbp_type == ADM8211_TYPE_RFMD) { | ||
958 | /* RF3000 BBP */ | ||
959 | /* another set: | ||
960 | * 11: c8 | ||
961 | * 14: 14 | ||
962 | * 15: 50 (chan 1..13; chan 14: d0) | ||
963 | * 1c: 00 | ||
964 | * 1d: 84 | ||
965 | */ | ||
966 | adm8211_write_bbp(dev, RF3000_CCA_CTRL, 0x80); | ||
967 | /* antenna selection: diversity */ | ||
968 | adm8211_write_bbp(dev, RF3000_DIVERSITY__RSSI, 0x80); | ||
969 | adm8211_write_bbp(dev, RF3000_TX_VAR_GAIN__TX_LEN_EXT, 0x74); | ||
970 | adm8211_write_bbp(dev, RF3000_LOW_GAIN_CALIB, 0x38); | ||
971 | adm8211_write_bbp(dev, RF3000_HIGH_GAIN_CALIB, 0x40); | ||
972 | |||
973 | if (priv->eeprom->major_version < 2) { | ||
974 | adm8211_write_bbp(dev, 0x1c, 0x00); | ||
975 | adm8211_write_bbp(dev, 0x1d, 0x80); | ||
976 | } else { | ||
977 | if (priv->revid == ADM8211_REV_BA) | ||
978 | adm8211_write_bbp(dev, 0x1c, priv->eeprom->cr28); | ||
979 | else | ||
980 | adm8211_write_bbp(dev, 0x1c, 0x00); | ||
981 | |||
982 | adm8211_write_bbp(dev, 0x1d, priv->eeprom->cr29); | ||
983 | } | ||
984 | } else if (priv->bbp_type == ADM8211_TYPE_ADMTEK) { | ||
985 | /* reset baseband */ | ||
986 | adm8211_write_bbp(dev, 0x00, 0xFF); | ||
987 | /* antenna selection: diversity */ | ||
988 | adm8211_write_bbp(dev, 0x07, 0x0A); | ||
989 | |||
990 | /* TODO: find documentation for this */ | ||
991 | switch (priv->transceiver_type) { | ||
992 | case ADM8211_RFMD2958: | ||
993 | case ADM8211_RFMD2958_RF3000_CONTROL_POWER: | ||
994 | adm8211_write_bbp(dev, 0x00, 0x00); | ||
995 | adm8211_write_bbp(dev, 0x01, 0x00); | ||
996 | adm8211_write_bbp(dev, 0x02, 0x00); | ||
997 | adm8211_write_bbp(dev, 0x03, 0x00); | ||
998 | adm8211_write_bbp(dev, 0x06, 0x0f); | ||
999 | adm8211_write_bbp(dev, 0x09, 0x00); | ||
1000 | adm8211_write_bbp(dev, 0x0a, 0x00); | ||
1001 | adm8211_write_bbp(dev, 0x0b, 0x00); | ||
1002 | adm8211_write_bbp(dev, 0x0c, 0x00); | ||
1003 | adm8211_write_bbp(dev, 0x0f, 0xAA); | ||
1004 | adm8211_write_bbp(dev, 0x10, 0x8c); | ||
1005 | adm8211_write_bbp(dev, 0x11, 0x43); | ||
1006 | adm8211_write_bbp(dev, 0x18, 0x40); | ||
1007 | adm8211_write_bbp(dev, 0x20, 0x23); | ||
1008 | adm8211_write_bbp(dev, 0x21, 0x02); | ||
1009 | adm8211_write_bbp(dev, 0x22, 0x28); | ||
1010 | adm8211_write_bbp(dev, 0x23, 0x30); | ||
1011 | adm8211_write_bbp(dev, 0x24, 0x2d); | ||
1012 | adm8211_write_bbp(dev, 0x28, 0x35); | ||
1013 | adm8211_write_bbp(dev, 0x2a, 0x8c); | ||
1014 | adm8211_write_bbp(dev, 0x2b, 0x81); | ||
1015 | adm8211_write_bbp(dev, 0x2c, 0x44); | ||
1016 | adm8211_write_bbp(dev, 0x2d, 0x0A); | ||
1017 | adm8211_write_bbp(dev, 0x29, 0x40); | ||
1018 | adm8211_write_bbp(dev, 0x60, 0x08); | ||
1019 | adm8211_write_bbp(dev, 0x64, 0x01); | ||
1020 | break; | ||
1021 | |||
1022 | case ADM8211_MAX2820: | ||
1023 | adm8211_write_bbp(dev, 0x00, 0x00); | ||
1024 | adm8211_write_bbp(dev, 0x01, 0x00); | ||
1025 | adm8211_write_bbp(dev, 0x02, 0x00); | ||
1026 | adm8211_write_bbp(dev, 0x03, 0x00); | ||
1027 | adm8211_write_bbp(dev, 0x06, 0x0f); | ||
1028 | adm8211_write_bbp(dev, 0x09, 0x05); | ||
1029 | adm8211_write_bbp(dev, 0x0a, 0x02); | ||
1030 | adm8211_write_bbp(dev, 0x0b, 0x00); | ||
1031 | adm8211_write_bbp(dev, 0x0c, 0x0f); | ||
1032 | adm8211_write_bbp(dev, 0x0f, 0x55); | ||
1033 | adm8211_write_bbp(dev, 0x10, 0x8d); | ||
1034 | adm8211_write_bbp(dev, 0x11, 0x43); | ||
1035 | adm8211_write_bbp(dev, 0x18, 0x4a); | ||
1036 | adm8211_write_bbp(dev, 0x20, 0x20); | ||
1037 | adm8211_write_bbp(dev, 0x21, 0x02); | ||
1038 | adm8211_write_bbp(dev, 0x22, 0x23); | ||
1039 | adm8211_write_bbp(dev, 0x23, 0x30); | ||
1040 | adm8211_write_bbp(dev, 0x24, 0x2d); | ||
1041 | adm8211_write_bbp(dev, 0x2a, 0x8c); | ||
1042 | adm8211_write_bbp(dev, 0x2b, 0x81); | ||
1043 | adm8211_write_bbp(dev, 0x2c, 0x44); | ||
1044 | adm8211_write_bbp(dev, 0x29, 0x4a); | ||
1045 | adm8211_write_bbp(dev, 0x60, 0x2b); | ||
1046 | adm8211_write_bbp(dev, 0x64, 0x01); | ||
1047 | break; | ||
1048 | |||
1049 | case ADM8211_AL2210L: | ||
1050 | adm8211_write_bbp(dev, 0x00, 0x00); | ||
1051 | adm8211_write_bbp(dev, 0x01, 0x00); | ||
1052 | adm8211_write_bbp(dev, 0x02, 0x00); | ||
1053 | adm8211_write_bbp(dev, 0x03, 0x00); | ||
1054 | adm8211_write_bbp(dev, 0x06, 0x0f); | ||
1055 | adm8211_write_bbp(dev, 0x07, 0x05); | ||
1056 | adm8211_write_bbp(dev, 0x08, 0x03); | ||
1057 | adm8211_write_bbp(dev, 0x09, 0x00); | ||
1058 | adm8211_write_bbp(dev, 0x0a, 0x00); | ||
1059 | adm8211_write_bbp(dev, 0x0b, 0x00); | ||
1060 | adm8211_write_bbp(dev, 0x0c, 0x10); | ||
1061 | adm8211_write_bbp(dev, 0x0f, 0x55); | ||
1062 | adm8211_write_bbp(dev, 0x10, 0x8d); | ||
1063 | adm8211_write_bbp(dev, 0x11, 0x43); | ||
1064 | adm8211_write_bbp(dev, 0x18, 0x4a); | ||
1065 | adm8211_write_bbp(dev, 0x20, 0x20); | ||
1066 | adm8211_write_bbp(dev, 0x21, 0x02); | ||
1067 | adm8211_write_bbp(dev, 0x22, 0x23); | ||
1068 | adm8211_write_bbp(dev, 0x23, 0x30); | ||
1069 | adm8211_write_bbp(dev, 0x24, 0x2d); | ||
1070 | adm8211_write_bbp(dev, 0x2a, 0xaa); | ||
1071 | adm8211_write_bbp(dev, 0x2b, 0x81); | ||
1072 | adm8211_write_bbp(dev, 0x2c, 0x44); | ||
1073 | adm8211_write_bbp(dev, 0x29, 0xfa); | ||
1074 | adm8211_write_bbp(dev, 0x60, 0x2d); | ||
1075 | adm8211_write_bbp(dev, 0x64, 0x01); | ||
1076 | break; | ||
1077 | |||
1078 | case ADM8211_RFMD2948: | ||
1079 | break; | ||
1080 | |||
1081 | default: | ||
1082 | printk(KERN_DEBUG "%s: unsupported transceiver %d\n", | ||
1083 | wiphy_name(dev->wiphy), priv->transceiver_type); | ||
1084 | break; | ||
1085 | } | ||
1086 | } else | ||
1087 | printk(KERN_DEBUG "%s: unsupported BBP %d\n", | ||
1088 | wiphy_name(dev->wiphy), priv->bbp_type); | ||
1089 | |||
1090 | ADM8211_CSR_WRITE(SYNRF, 0); | ||
1091 | |||
1092 | /* Set RF CAL control source to MAC control */ | ||
1093 | reg = ADM8211_CSR_READ(SYNCTL); | ||
1094 | reg |= ADM8211_SYNCTL_SELCAL; | ||
1095 | ADM8211_CSR_WRITE(SYNCTL, reg); | ||
1096 | |||
1097 | return 0; | ||
1098 | } | ||
1099 | |||
1100 | /* configures hw beacons/probe responses */ | ||
1101 | static int adm8211_set_rate(struct ieee80211_hw *dev) | ||
1102 | { | ||
1103 | struct adm8211_priv *priv = dev->priv; | ||
1104 | u32 reg; | ||
1105 | int i = 0; | ||
1106 | u8 rate_buf[12] = {0}; | ||
1107 | |||
1108 | /* write supported rates */ | ||
1109 | if (priv->revid != ADM8211_REV_BA) { | ||
1110 | rate_buf[0] = ARRAY_SIZE(adm8211_rates); | ||
1111 | for (i = 0; i < ARRAY_SIZE(adm8211_rates); i++) | ||
1112 | rate_buf[i + 1] = (adm8211_rates[i].rate / 5) | 0x80; | ||
1113 | } else { | ||
1114 | /* workaround for rev BA specific bug */ | ||
1115 | rate_buf[0] = 0x04; | ||
1116 | rate_buf[1] = 0x82; | ||
1117 | rate_buf[2] = 0x04; | ||
1118 | rate_buf[3] = 0x0b; | ||
1119 | rate_buf[4] = 0x16; | ||
1120 | } | ||
1121 | |||
1122 | adm8211_write_sram_bytes(dev, ADM8211_SRAM_SUPP_RATE, rate_buf, | ||
1123 | ARRAY_SIZE(adm8211_rates) + 1); | ||
1124 | |||
1125 | reg = ADM8211_CSR_READ(PLCPHD) & 0x00FFFFFF; /* keep bits 0-23 */ | ||
1126 | reg |= 1 << 15; /* short preamble */ | ||
1127 | reg |= 110 << 24; | ||
1128 | ADM8211_CSR_WRITE(PLCPHD, reg); | ||
1129 | |||
1130 | /* MTMLT = 512 TU (max TX MSDU lifetime) | ||
1131 | * BCNTSIG = plcp_signal (beacon, probe resp, and atim TX rate) | ||
1132 | * SRTYLIM = 224 (short retry limit, TX header value is default) */ | ||
1133 | ADM8211_CSR_WRITE(TXLMT, (512 << 16) | (110 << 8) | (224 << 0)); | ||
1134 | |||
1135 | return 0; | ||
1136 | } | ||
1137 | |||
1138 | static void adm8211_hw_init(struct ieee80211_hw *dev) | ||
1139 | { | ||
1140 | struct adm8211_priv *priv = dev->priv; | ||
1141 | u32 reg; | ||
1142 | u8 cline; | ||
1143 | |||
1144 | reg = le32_to_cpu(ADM8211_CSR_READ(PAR)); | ||
1145 | reg |= ADM8211_PAR_MRLE | ADM8211_PAR_MRME; | ||
1146 | reg &= ~(ADM8211_PAR_BAR | ADM8211_PAR_CAL); | ||
1147 | |||
1148 | if (!pci_set_mwi(priv->pdev)) { | ||
1149 | reg |= 0x1 << 24; | ||
1150 | pci_read_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, &cline); | ||
1151 | |||
1152 | switch (cline) { | ||
1153 | case 0x8: reg |= (0x1 << 14); | ||
1154 | break; | ||
1155 | case 0x16: reg |= (0x2 << 14); | ||
1156 | break; | ||
1157 | case 0x32: reg |= (0x3 << 14); | ||
1158 | break; | ||
1159 | default: reg |= (0x0 << 14); | ||
1160 | break; | ||
1161 | } | ||
1162 | } | ||
1163 | |||
1164 | ADM8211_CSR_WRITE(PAR, reg); | ||
1165 | |||
1166 | reg = ADM8211_CSR_READ(CSR_TEST1); | ||
1167 | reg &= ~(0xF << 28); | ||
1168 | reg |= (1 << 28) | (1 << 31); | ||
1169 | ADM8211_CSR_WRITE(CSR_TEST1, reg); | ||
1170 | |||
1171 | /* lose link after 4 lost beacons */ | ||
1172 | reg = (0x04 << 21) | ADM8211_WCSR_TSFTWE | ADM8211_WCSR_LSOE; | ||
1173 | ADM8211_CSR_WRITE(WCSR, reg); | ||
1174 | |||
1175 | /* Disable APM, enable receive FIFO threshold, and set drain receive | ||
1176 | * threshold to store-and-forward */ | ||
1177 | reg = ADM8211_CSR_READ(CMDR); | ||
1178 | reg &= ~(ADM8211_CMDR_APM | ADM8211_CMDR_DRT); | ||
1179 | reg |= ADM8211_CMDR_RTE | ADM8211_CMDR_DRT_SF; | ||
1180 | ADM8211_CSR_WRITE(CMDR, reg); | ||
1181 | |||
1182 | adm8211_set_rate(dev); | ||
1183 | |||
1184 | /* 4-bit values: | ||
1185 | * PWR1UP = 8 * 2 ms | ||
1186 | * PWR0PAPE = 8 us or 5 us | ||
1187 | * PWR1PAPE = 1 us or 3 us | ||
1188 | * PWR0TRSW = 5 us | ||
1189 | * PWR1TRSW = 12 us | ||
1190 | * PWR0PE2 = 13 us | ||
1191 | * PWR1PE2 = 1 us | ||
1192 | * PWR0TXPE = 8 or 6 */ | ||
1193 | if (priv->revid < ADM8211_REV_CA) | ||
1194 | ADM8211_CSR_WRITE(TOFS2, 0x8815cd18); | ||
1195 | else | ||
1196 | ADM8211_CSR_WRITE(TOFS2, 0x8535cd16); | ||
1197 | |||
1198 | /* Enable store and forward for transmit */ | ||
1199 | priv->nar = ADM8211_NAR_SF | ADM8211_NAR_PB; | ||
1200 | ADM8211_CSR_WRITE(NAR, priv->nar); | ||
1201 | |||
1202 | /* Reset RF */ | ||
1203 | ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_RADIO); | ||
1204 | ADM8211_CSR_READ(SYNRF); | ||
1205 | msleep(10); | ||
1206 | ADM8211_CSR_WRITE(SYNRF, 0); | ||
1207 | ADM8211_CSR_READ(SYNRF); | ||
1208 | msleep(5); | ||
1209 | |||
1210 | /* Set CFP Max Duration to 0x10 TU */ | ||
1211 | reg = ADM8211_CSR_READ(CFPP); | ||
1212 | reg &= ~(0xffff << 8); | ||
1213 | reg |= 0x0010 << 8; | ||
1214 | ADM8211_CSR_WRITE(CFPP, reg); | ||
1215 | |||
1216 | /* USCNT = 0x16 (number of system clocks, 22 MHz, in 1us | ||
1217 | * TUCNT = 0x3ff - Tu counter 1024 us */ | ||
1218 | ADM8211_CSR_WRITE(TOFS0, (0x16 << 24) | 0x3ff); | ||
1219 | |||
1220 | /* SLOT=20 us, SIFS=110 cycles of 22 MHz (5 us), | ||
1221 | * DIFS=50 us, EIFS=100 us */ | ||
1222 | if (priv->revid < ADM8211_REV_CA) | ||
1223 | ADM8211_CSR_WRITE(IFST, (20 << 23) | (110 << 15) | | ||
1224 | (50 << 9) | 100); | ||
1225 | else | ||
1226 | ADM8211_CSR_WRITE(IFST, (20 << 23) | (24 << 15) | | ||
1227 | (50 << 9) | 100); | ||
1228 | |||
1229 | /* PCNT = 1 (MAC idle time awake/sleep, unit S) | ||
1230 | * RMRD = 2346 * 8 + 1 us (max RX duration) */ | ||
1231 | ADM8211_CSR_WRITE(RMD, (1 << 16) | 18769); | ||
1232 | |||
1233 | /* MART=65535 us, MIRT=256 us, TSFTOFST=0 us */ | ||
1234 | ADM8211_CSR_WRITE(RSPT, 0xffffff00); | ||
1235 | |||
1236 | /* Initialize BBP (and SYN) */ | ||
1237 | adm8211_hw_init_bbp(dev); | ||
1238 | |||
1239 | /* make sure interrupts are off */ | ||
1240 | ADM8211_CSR_WRITE(IER, 0); | ||
1241 | |||
1242 | /* ACK interrupts */ | ||
1243 | ADM8211_CSR_WRITE(STSR, ADM8211_CSR_READ(STSR)); | ||
1244 | |||
1245 | /* Setup WEP (turns it off for now) */ | ||
1246 | reg = ADM8211_CSR_READ(MACTEST); | ||
1247 | reg &= ~(7 << 20); | ||
1248 | ADM8211_CSR_WRITE(MACTEST, reg); | ||
1249 | |||
1250 | reg = ADM8211_CSR_READ(WEPCTL); | ||
1251 | reg &= ~ADM8211_WEPCTL_WEPENABLE; | ||
1252 | reg |= ADM8211_WEPCTL_WEPRXBYP; | ||
1253 | ADM8211_CSR_WRITE(WEPCTL, reg); | ||
1254 | |||
1255 | /* Clear the missed-packet counter. */ | ||
1256 | ADM8211_CSR_READ(LPC); | ||
1257 | |||
1258 | if (!priv->mac_addr) | ||
1259 | return; | ||
1260 | |||
1261 | /* set mac address */ | ||
1262 | ADM8211_CSR_WRITE(PAR0, *(u32 *)priv->mac_addr); | ||
1263 | ADM8211_CSR_WRITE(PAR1, *(u16 *)&priv->mac_addr[4]); | ||
1264 | } | ||
1265 | |||
1266 | static int adm8211_hw_reset(struct ieee80211_hw *dev) | ||
1267 | { | ||
1268 | struct adm8211_priv *priv = dev->priv; | ||
1269 | u32 reg, tmp; | ||
1270 | int timeout = 100; | ||
1271 | |||
1272 | /* Power-on issue */ | ||
1273 | /* TODO: check if this is necessary */ | ||
1274 | ADM8211_CSR_WRITE(FRCTL, 0); | ||
1275 | |||
1276 | /* Reset the chip */ | ||
1277 | tmp = ADM8211_CSR_READ(PAR); | ||
1278 | ADM8211_CSR_WRITE(PAR, ADM8211_PAR_SWR); | ||
1279 | |||
1280 | while ((ADM8211_CSR_READ(PAR) & ADM8211_PAR_SWR) && timeout--) | ||
1281 | msleep(50); | ||
1282 | |||
1283 | if (timeout <= 0) | ||
1284 | return -ETIMEDOUT; | ||
1285 | |||
1286 | ADM8211_CSR_WRITE(PAR, tmp); | ||
1287 | |||
1288 | if (priv->revid == ADM8211_REV_BA && | ||
1289 | (priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER || | ||
1290 | priv->transceiver_type == ADM8211_RFMD2958)) { | ||
1291 | reg = ADM8211_CSR_READ(CSR_TEST1); | ||
1292 | reg |= (1 << 4) | (1 << 5); | ||
1293 | ADM8211_CSR_WRITE(CSR_TEST1, reg); | ||
1294 | } else if (priv->revid == ADM8211_REV_CA) { | ||
1295 | reg = ADM8211_CSR_READ(CSR_TEST1); | ||
1296 | reg &= ~((1 << 4) | (1 << 5)); | ||
1297 | ADM8211_CSR_WRITE(CSR_TEST1, reg); | ||
1298 | } | ||
1299 | |||
1300 | ADM8211_CSR_WRITE(FRCTL, 0); | ||
1301 | |||
1302 | reg = ADM8211_CSR_READ(CSR_TEST0); | ||
1303 | reg |= ADM8211_CSR_TEST0_EPRLD; /* EEPROM Recall */ | ||
1304 | ADM8211_CSR_WRITE(CSR_TEST0, reg); | ||
1305 | |||
1306 | adm8211_clear_sram(dev); | ||
1307 | |||
1308 | return 0; | ||
1309 | } | ||
1310 | |||
1311 | static u64 adm8211_get_tsft(struct ieee80211_hw *dev) | ||
1312 | { | ||
1313 | struct adm8211_priv *priv = dev->priv; | ||
1314 | u32 tsftl; | ||
1315 | u64 tsft; | ||
1316 | |||
1317 | tsftl = ADM8211_CSR_READ(TSFTL); | ||
1318 | tsft = ADM8211_CSR_READ(TSFTH); | ||
1319 | tsft <<= 32; | ||
1320 | tsft |= tsftl; | ||
1321 | |||
1322 | return tsft; | ||
1323 | } | ||
1324 | |||
1325 | static void adm8211_set_interval(struct ieee80211_hw *dev, | ||
1326 | unsigned short bi, unsigned short li) | ||
1327 | { | ||
1328 | struct adm8211_priv *priv = dev->priv; | ||
1329 | u32 reg; | ||
1330 | |||
1331 | /* BP (beacon interval) = data->beacon_interval | ||
1332 | * LI (listen interval) = data->listen_interval (in beacon intervals) */ | ||
1333 | reg = (bi << 16) | li; | ||
1334 | ADM8211_CSR_WRITE(BPLI, reg); | ||
1335 | } | ||
1336 | |||
1337 | static void adm8211_set_bssid(struct ieee80211_hw *dev, u8 *bssid) | ||
1338 | { | ||
1339 | struct adm8211_priv *priv = dev->priv; | ||
1340 | u32 reg; | ||
1341 | |||
1342 | reg = bssid[0] | (bssid[1] << 8) | (bssid[2] << 16) | (bssid[3] << 24); | ||
1343 | ADM8211_CSR_WRITE(BSSID0, reg); | ||
1344 | reg = ADM8211_CSR_READ(ABDA1); | ||
1345 | reg &= 0x0000ffff; | ||
1346 | reg |= (bssid[4] << 16) | (bssid[5] << 24); | ||
1347 | ADM8211_CSR_WRITE(ABDA1, reg); | ||
1348 | } | ||
1349 | |||
1350 | static int adm8211_set_ssid(struct ieee80211_hw *dev, u8 *ssid, size_t ssid_len) | ||
1351 | { | ||
1352 | struct adm8211_priv *priv = dev->priv; | ||
1353 | u8 buf[36]; | ||
1354 | |||
1355 | if (ssid_len > 32) | ||
1356 | return -EINVAL; | ||
1357 | |||
1358 | memset(buf, 0, sizeof(buf)); | ||
1359 | buf[0] = ssid_len; | ||
1360 | memcpy(buf + 1, ssid, ssid_len); | ||
1361 | adm8211_write_sram_bytes(dev, ADM8211_SRAM_SSID, buf, 33); | ||
1362 | /* TODO: configure beacon for adhoc? */ | ||
1363 | return 0; | ||
1364 | } | ||
1365 | |||
1366 | static int adm8211_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) | ||
1367 | { | ||
1368 | struct adm8211_priv *priv = dev->priv; | ||
1369 | |||
1370 | if (conf->channel != priv->channel) { | ||
1371 | priv->channel = conf->channel; | ||
1372 | adm8211_rf_set_channel(dev, priv->channel); | ||
1373 | } | ||
1374 | |||
1375 | return 0; | ||
1376 | } | ||
1377 | |||
1378 | static int adm8211_config_interface(struct ieee80211_hw *dev, int if_id, | ||
1379 | struct ieee80211_if_conf *conf) | ||
1380 | { | ||
1381 | struct adm8211_priv *priv = dev->priv; | ||
1382 | |||
1383 | if (memcmp(conf->bssid, priv->bssid, ETH_ALEN)) { | ||
1384 | adm8211_set_bssid(dev, conf->bssid); | ||
1385 | memcpy(priv->bssid, conf->bssid, ETH_ALEN); | ||
1386 | } | ||
1387 | |||
1388 | if (conf->ssid_len != priv->ssid_len || | ||
1389 | memcmp(conf->ssid, priv->ssid, conf->ssid_len)) { | ||
1390 | adm8211_set_ssid(dev, conf->ssid, conf->ssid_len); | ||
1391 | priv->ssid_len = conf->ssid_len; | ||
1392 | memcpy(priv->ssid, conf->ssid, conf->ssid_len); | ||
1393 | } | ||
1394 | |||
1395 | return 0; | ||
1396 | } | ||
1397 | |||
1398 | static int adm8211_add_interface(struct ieee80211_hw *dev, | ||
1399 | struct ieee80211_if_init_conf *conf) | ||
1400 | { | ||
1401 | struct adm8211_priv *priv = dev->priv; | ||
1402 | /* NOTE: using IEEE80211_IF_TYPE_MGMT to indicate no mode selected */ | ||
1403 | if (priv->mode != IEEE80211_IF_TYPE_MGMT) | ||
1404 | return -1; | ||
1405 | |||
1406 | switch (conf->type) { | ||
1407 | case IEEE80211_IF_TYPE_STA: | ||
1408 | case IEEE80211_IF_TYPE_MNTR: | ||
1409 | priv->mode = conf->type; | ||
1410 | break; | ||
1411 | default: | ||
1412 | return -EOPNOTSUPP; | ||
1413 | } | ||
1414 | |||
1415 | priv->mac_addr = conf->mac_addr; | ||
1416 | |||
1417 | return 0; | ||
1418 | } | ||
1419 | |||
1420 | static void adm8211_remove_interface(struct ieee80211_hw *dev, | ||
1421 | struct ieee80211_if_init_conf *conf) | ||
1422 | { | ||
1423 | struct adm8211_priv *priv = dev->priv; | ||
1424 | priv->mode = IEEE80211_IF_TYPE_MGMT; | ||
1425 | } | ||
1426 | |||
1427 | static int adm8211_init_rings(struct ieee80211_hw *dev) | ||
1428 | { | ||
1429 | struct adm8211_priv *priv = dev->priv; | ||
1430 | struct adm8211_desc *desc = NULL; | ||
1431 | struct adm8211_rx_ring_info *rx_info; | ||
1432 | struct adm8211_tx_ring_info *tx_info; | ||
1433 | unsigned int i; | ||
1434 | |||
1435 | for (i = 0; i < priv->rx_ring_size; i++) { | ||
1436 | desc = &priv->rx_ring[i]; | ||
1437 | desc->status = 0; | ||
1438 | desc->length = cpu_to_le32(RX_PKT_SIZE); | ||
1439 | priv->rx_buffers[i].skb = NULL; | ||
1440 | } | ||
1441 | /* Mark the end of RX ring; hw returns to base address after this | ||
1442 | * descriptor */ | ||
1443 | desc->length |= cpu_to_le32(RDES1_CONTROL_RER); | ||
1444 | |||
1445 | for (i = 0; i < priv->rx_ring_size; i++) { | ||
1446 | desc = &priv->rx_ring[i]; | ||
1447 | rx_info = &priv->rx_buffers[i]; | ||
1448 | |||
1449 | rx_info->skb = dev_alloc_skb(RX_PKT_SIZE); | ||
1450 | if (rx_info->skb == NULL) | ||
1451 | break; | ||
1452 | rx_info->mapping = pci_map_single(priv->pdev, | ||
1453 | skb_tail_pointer(rx_info->skb), | ||
1454 | RX_PKT_SIZE, | ||
1455 | PCI_DMA_FROMDEVICE); | ||
1456 | desc->buffer1 = cpu_to_le32(rx_info->mapping); | ||
1457 | desc->status = cpu_to_le32(RDES0_STATUS_OWN | RDES0_STATUS_SQL); | ||
1458 | } | ||
1459 | |||
1460 | /* Setup TX ring. TX buffers descriptors will be filled in as needed */ | ||
1461 | for (i = 0; i < priv->tx_ring_size; i++) { | ||
1462 | desc = &priv->tx_ring[i]; | ||
1463 | tx_info = &priv->tx_buffers[i]; | ||
1464 | |||
1465 | tx_info->skb = NULL; | ||
1466 | tx_info->mapping = 0; | ||
1467 | desc->status = 0; | ||
1468 | } | ||
1469 | desc->length = cpu_to_le32(TDES1_CONTROL_TER); | ||
1470 | |||
1471 | priv->cur_rx = priv->cur_tx = priv->dirty_tx = 0; | ||
1472 | ADM8211_CSR_WRITE(RDB, priv->rx_ring_dma); | ||
1473 | ADM8211_CSR_WRITE(TDBD, priv->tx_ring_dma); | ||
1474 | |||
1475 | return 0; | ||
1476 | } | ||
1477 | |||
1478 | static void adm8211_free_rings(struct ieee80211_hw *dev) | ||
1479 | { | ||
1480 | struct adm8211_priv *priv = dev->priv; | ||
1481 | unsigned int i; | ||
1482 | |||
1483 | for (i = 0; i < priv->rx_ring_size; i++) { | ||
1484 | if (!priv->rx_buffers[i].skb) | ||
1485 | continue; | ||
1486 | |||
1487 | pci_unmap_single( | ||
1488 | priv->pdev, | ||
1489 | priv->rx_buffers[i].mapping, | ||
1490 | RX_PKT_SIZE, PCI_DMA_FROMDEVICE); | ||
1491 | |||
1492 | dev_kfree_skb(priv->rx_buffers[i].skb); | ||
1493 | } | ||
1494 | |||
1495 | for (i = 0; i < priv->tx_ring_size; i++) { | ||
1496 | if (!priv->tx_buffers[i].skb) | ||
1497 | continue; | ||
1498 | |||
1499 | pci_unmap_single(priv->pdev, | ||
1500 | priv->tx_buffers[i].mapping, | ||
1501 | priv->tx_buffers[i].skb->len, | ||
1502 | PCI_DMA_TODEVICE); | ||
1503 | |||
1504 | dev_kfree_skb(priv->tx_buffers[i].skb); | ||
1505 | } | ||
1506 | } | ||
1507 | |||
1508 | static int adm8211_open(struct ieee80211_hw *dev) | ||
1509 | { | ||
1510 | struct adm8211_priv *priv = dev->priv; | ||
1511 | int retval; | ||
1512 | |||
1513 | /* Power up MAC and RF chips */ | ||
1514 | retval = adm8211_hw_reset(dev); | ||
1515 | if (retval) { | ||
1516 | printk(KERN_ERR "%s: hardware reset failed\n", | ||
1517 | wiphy_name(dev->wiphy)); | ||
1518 | goto fail; | ||
1519 | } | ||
1520 | |||
1521 | retval = adm8211_init_rings(dev); | ||
1522 | if (retval) { | ||
1523 | printk(KERN_ERR "%s: failed to initialize rings\n", | ||
1524 | wiphy_name(dev->wiphy)); | ||
1525 | goto fail; | ||
1526 | } | ||
1527 | |||
1528 | /* Init hardware */ | ||
1529 | adm8211_hw_init(dev); | ||
1530 | adm8211_rf_set_channel(dev, priv->channel); | ||
1531 | |||
1532 | retval = request_irq(priv->pdev->irq, &adm8211_interrupt, | ||
1533 | IRQF_SHARED, "adm8211", dev); | ||
1534 | if (retval) { | ||
1535 | printk(KERN_ERR "%s: failed to register IRQ handler\n", | ||
1536 | wiphy_name(dev->wiphy)); | ||
1537 | goto fail; | ||
1538 | } | ||
1539 | |||
1540 | ADM8211_CSR_WRITE(IER, ADM8211_IER_NIE | ADM8211_IER_AIE | | ||
1541 | ADM8211_IER_RCIE | ADM8211_IER_TCIE | | ||
1542 | ADM8211_IER_TDUIE | ADM8211_IER_GPTIE); | ||
1543 | adm8211_update_mode(dev); | ||
1544 | ADM8211_CSR_WRITE(RDR, 0); | ||
1545 | |||
1546 | adm8211_set_interval(dev, 100, 10); | ||
1547 | return 0; | ||
1548 | |||
1549 | fail: | ||
1550 | return retval; | ||
1551 | } | ||
1552 | |||
1553 | static int adm8211_stop(struct ieee80211_hw *dev) | ||
1554 | { | ||
1555 | struct adm8211_priv *priv = dev->priv; | ||
1556 | |||
1557 | priv->nar = 0; | ||
1558 | ADM8211_CSR_WRITE(NAR, 0); | ||
1559 | ADM8211_CSR_WRITE(IER, 0); | ||
1560 | ADM8211_CSR_READ(NAR); | ||
1561 | |||
1562 | free_irq(priv->pdev->irq, dev); | ||
1563 | |||
1564 | adm8211_free_rings(dev); | ||
1565 | return 0; | ||
1566 | } | ||
1567 | |||
1568 | static void adm8211_calc_durations(int *dur, int *plcp, size_t payload_len, int len, | ||
1569 | int plcp_signal, int short_preamble) | ||
1570 | { | ||
1571 | /* Alternative calculation from NetBSD: */ | ||
1572 | |||
1573 | /* IEEE 802.11b durations for DSSS PHY in microseconds */ | ||
1574 | #define IEEE80211_DUR_DS_LONG_PREAMBLE 144 | ||
1575 | #define IEEE80211_DUR_DS_SHORT_PREAMBLE 72 | ||
1576 | #define IEEE80211_DUR_DS_FAST_PLCPHDR 24 | ||
1577 | #define IEEE80211_DUR_DS_SLOW_PLCPHDR 48 | ||
1578 | #define IEEE80211_DUR_DS_SLOW_ACK 112 | ||
1579 | #define IEEE80211_DUR_DS_FAST_ACK 56 | ||
1580 | #define IEEE80211_DUR_DS_SLOW_CTS 112 | ||
1581 | #define IEEE80211_DUR_DS_FAST_CTS 56 | ||
1582 | #define IEEE80211_DUR_DS_SLOT 20 | ||
1583 | #define IEEE80211_DUR_DS_SIFS 10 | ||
1584 | |||
1585 | int remainder; | ||
1586 | |||
1587 | *dur = (80 * (24 + payload_len) + plcp_signal - 1) | ||
1588 | / plcp_signal; | ||
1589 | |||
1590 | if (plcp_signal <= PLCP_SIGNAL_2M) | ||
1591 | /* 1-2Mbps WLAN: send ACK/CTS at 1Mbps */ | ||
1592 | *dur += 3 * (IEEE80211_DUR_DS_SIFS + | ||
1593 | IEEE80211_DUR_DS_SHORT_PREAMBLE + | ||
1594 | IEEE80211_DUR_DS_FAST_PLCPHDR) + | ||
1595 | IEEE80211_DUR_DS_SLOW_CTS + IEEE80211_DUR_DS_SLOW_ACK; | ||
1596 | else | ||
1597 | /* 5-11Mbps WLAN: send ACK/CTS at 2Mbps */ | ||
1598 | *dur += 3 * (IEEE80211_DUR_DS_SIFS + | ||
1599 | IEEE80211_DUR_DS_SHORT_PREAMBLE + | ||
1600 | IEEE80211_DUR_DS_FAST_PLCPHDR) + | ||
1601 | IEEE80211_DUR_DS_FAST_CTS + IEEE80211_DUR_DS_FAST_ACK; | ||
1602 | |||
1603 | /* lengthen duration if long preamble */ | ||
1604 | if (!short_preamble) | ||
1605 | *dur += 3 * (IEEE80211_DUR_DS_LONG_PREAMBLE - | ||
1606 | IEEE80211_DUR_DS_SHORT_PREAMBLE) + | ||
1607 | 3 * (IEEE80211_DUR_DS_SLOW_PLCPHDR - | ||
1608 | IEEE80211_DUR_DS_FAST_PLCPHDR); | ||
1609 | |||
1610 | |||
1611 | *plcp = (80 * len) / plcp_signal; | ||
1612 | remainder = (80 * len) % plcp_signal; | ||
1613 | if (plcp_signal == PLCP_SIGNAL_11M && | ||
1614 | remainder <= 30 && remainder > 0) | ||
1615 | *plcp = (*plcp | 0x8000) + 1; | ||
1616 | else if (remainder) | ||
1617 | (*plcp)++; | ||
1618 | } | ||
1619 | |||
1620 | /* Transmit skb w/adm8211_tx_hdr (802.11 header created by hardware) */ | ||
1621 | static void adm8211_tx_raw(struct ieee80211_hw *dev, struct sk_buff *skb, | ||
1622 | u16 plcp_signal, | ||
1623 | struct ieee80211_tx_control *control, | ||
1624 | size_t hdrlen) | ||
1625 | { | ||
1626 | struct adm8211_priv *priv = dev->priv; | ||
1627 | unsigned long flags; | ||
1628 | dma_addr_t mapping; | ||
1629 | unsigned int entry; | ||
1630 | u32 flag; | ||
1631 | |||
1632 | mapping = pci_map_single(priv->pdev, skb->data, skb->len, | ||
1633 | PCI_DMA_TODEVICE); | ||
1634 | |||
1635 | spin_lock_irqsave(&priv->lock, flags); | ||
1636 | |||
1637 | if (priv->cur_tx - priv->dirty_tx == priv->tx_ring_size / 2) | ||
1638 | flag = TDES1_CONTROL_IC | TDES1_CONTROL_LS | TDES1_CONTROL_FS; | ||
1639 | else | ||
1640 | flag = TDES1_CONTROL_LS | TDES1_CONTROL_FS; | ||
1641 | |||
1642 | if (priv->cur_tx - priv->dirty_tx == priv->tx_ring_size - 2) | ||
1643 | ieee80211_stop_queue(dev, 0); | ||
1644 | |||
1645 | entry = priv->cur_tx % priv->tx_ring_size; | ||
1646 | |||
1647 | priv->tx_buffers[entry].skb = skb; | ||
1648 | priv->tx_buffers[entry].mapping = mapping; | ||
1649 | memcpy(&priv->tx_buffers[entry].tx_control, control, sizeof(*control)); | ||
1650 | priv->tx_buffers[entry].hdrlen = hdrlen; | ||
1651 | priv->tx_ring[entry].buffer1 = cpu_to_le32(mapping); | ||
1652 | |||
1653 | if (entry == priv->tx_ring_size - 1) | ||
1654 | flag |= TDES1_CONTROL_TER; | ||
1655 | priv->tx_ring[entry].length = cpu_to_le32(flag | skb->len); | ||
1656 | |||
1657 | /* Set TX rate (SIGNAL field in PLCP PPDU format) */ | ||
1658 | flag = TDES0_CONTROL_OWN | (plcp_signal << 20) | 8 /* ? */; | ||
1659 | priv->tx_ring[entry].status = cpu_to_le32(flag); | ||
1660 | |||
1661 | priv->cur_tx++; | ||
1662 | |||
1663 | spin_unlock_irqrestore(&priv->lock, flags); | ||
1664 | |||
1665 | /* Trigger transmit poll */ | ||
1666 | ADM8211_CSR_WRITE(TDR, 0); | ||
1667 | } | ||
1668 | |||
1669 | /* Put adm8211_tx_hdr on skb and transmit */ | ||
1670 | static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb, | ||
1671 | struct ieee80211_tx_control *control) | ||
1672 | { | ||
1673 | struct adm8211_tx_hdr *txhdr; | ||
1674 | u16 fc; | ||
1675 | size_t payload_len, hdrlen; | ||
1676 | int plcp, dur, len, plcp_signal, short_preamble; | ||
1677 | struct ieee80211_hdr *hdr; | ||
1678 | |||
1679 | if (control->tx_rate < 0) { | ||
1680 | short_preamble = 1; | ||
1681 | plcp_signal = -control->tx_rate; | ||
1682 | } else { | ||
1683 | short_preamble = 0; | ||
1684 | plcp_signal = control->tx_rate; | ||
1685 | } | ||
1686 | |||
1687 | hdr = (struct ieee80211_hdr *)skb->data; | ||
1688 | fc = le16_to_cpu(hdr->frame_control) & ~IEEE80211_FCTL_PROTECTED; | ||
1689 | hdrlen = ieee80211_get_hdrlen(fc); | ||
1690 | memcpy(skb->cb, skb->data, hdrlen); | ||
1691 | hdr = (struct ieee80211_hdr *)skb->cb; | ||
1692 | skb_pull(skb, hdrlen); | ||
1693 | payload_len = skb->len; | ||
1694 | |||
1695 | txhdr = (struct adm8211_tx_hdr *) skb_push(skb, sizeof(*txhdr)); | ||
1696 | memset(txhdr, 0, sizeof(*txhdr)); | ||
1697 | memcpy(txhdr->da, ieee80211_get_DA(hdr), ETH_ALEN); | ||
1698 | txhdr->signal = plcp_signal; | ||
1699 | txhdr->frame_body_size = cpu_to_le16(payload_len); | ||
1700 | txhdr->frame_control = hdr->frame_control; | ||
1701 | |||
1702 | len = hdrlen + payload_len + FCS_LEN; | ||
1703 | if (fc & IEEE80211_FCTL_PROTECTED) | ||
1704 | len += 8; | ||
1705 | |||
1706 | txhdr->frag = cpu_to_le16(0x0FFF); | ||
1707 | adm8211_calc_durations(&dur, &plcp, payload_len, | ||
1708 | len, plcp_signal, short_preamble); | ||
1709 | txhdr->plcp_frag_head_len = cpu_to_le16(plcp); | ||
1710 | txhdr->plcp_frag_tail_len = cpu_to_le16(plcp); | ||
1711 | txhdr->dur_frag_head = cpu_to_le16(dur); | ||
1712 | txhdr->dur_frag_tail = cpu_to_le16(dur); | ||
1713 | |||
1714 | txhdr->header_control = cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_EXTEND_HEADER); | ||
1715 | |||
1716 | if (short_preamble) | ||
1717 | txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_SHORT_PREAMBLE); | ||
1718 | |||
1719 | if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) | ||
1720 | txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_RTS); | ||
1721 | |||
1722 | if (fc & IEEE80211_FCTL_PROTECTED) | ||
1723 | txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_WEP_ENGINE); | ||
1724 | |||
1725 | txhdr->retry_limit = control->retry_limit; | ||
1726 | |||
1727 | adm8211_tx_raw(dev, skb, plcp_signal, control, hdrlen); | ||
1728 | |||
1729 | return NETDEV_TX_OK; | ||
1730 | } | ||
1731 | |||
1732 | static int adm8211_alloc_rings(struct ieee80211_hw *dev) | ||
1733 | { | ||
1734 | struct adm8211_priv *priv = dev->priv; | ||
1735 | unsigned int ring_size; | ||
1736 | |||
1737 | priv->rx_buffers = kmalloc(sizeof(*priv->rx_buffers) * priv->rx_ring_size + | ||
1738 | sizeof(*priv->tx_buffers) * priv->tx_ring_size, GFP_KERNEL); | ||
1739 | if (!priv->rx_buffers) | ||
1740 | return -ENOMEM; | ||
1741 | |||
1742 | priv->tx_buffers = (void *)priv->rx_buffers + | ||
1743 | sizeof(*priv->rx_buffers) * priv->rx_ring_size; | ||
1744 | |||
1745 | /* Allocate TX/RX descriptors */ | ||
1746 | ring_size = sizeof(struct adm8211_desc) * priv->rx_ring_size + | ||
1747 | sizeof(struct adm8211_desc) * priv->tx_ring_size; | ||
1748 | priv->rx_ring = pci_alloc_consistent(priv->pdev, ring_size, | ||
1749 | &priv->rx_ring_dma); | ||
1750 | |||
1751 | if (!priv->rx_ring) { | ||
1752 | kfree(priv->rx_buffers); | ||
1753 | priv->rx_buffers = NULL; | ||
1754 | priv->tx_buffers = NULL; | ||
1755 | return -ENOMEM; | ||
1756 | } | ||
1757 | |||
1758 | priv->tx_ring = (struct adm8211_desc *)(priv->rx_ring + | ||
1759 | priv->rx_ring_size); | ||
1760 | priv->tx_ring_dma = priv->rx_ring_dma + | ||
1761 | sizeof(struct adm8211_desc) * priv->rx_ring_size; | ||
1762 | |||
1763 | return 0; | ||
1764 | } | ||
1765 | |||
1766 | static const struct ieee80211_ops adm8211_ops = { | ||
1767 | .tx = adm8211_tx, | ||
1768 | .open = adm8211_open, | ||
1769 | .stop = adm8211_stop, | ||
1770 | .add_interface = adm8211_add_interface, | ||
1771 | .remove_interface = adm8211_remove_interface, | ||
1772 | .config = adm8211_config, | ||
1773 | .config_interface = adm8211_config_interface, | ||
1774 | .set_multicast_list = adm8211_set_rx_mode, | ||
1775 | .get_stats = adm8211_get_stats, | ||
1776 | .get_tx_stats = adm8211_get_tx_stats, | ||
1777 | .get_tsf = adm8211_get_tsft | ||
1778 | }; | ||
1779 | |||
1780 | static int __devinit adm8211_probe(struct pci_dev *pdev, | ||
1781 | const struct pci_device_id *id) | ||
1782 | { | ||
1783 | struct ieee80211_hw *dev; | ||
1784 | struct adm8211_priv *priv; | ||
1785 | unsigned long mem_addr, mem_len; | ||
1786 | unsigned int io_addr, io_len; | ||
1787 | int err; | ||
1788 | u32 reg; | ||
1789 | u8 perm_addr[ETH_ALEN]; | ||
1790 | |||
1791 | #ifndef MODULE | ||
1792 | static unsigned int cardidx; | ||
1793 | if (!cardidx++) | ||
1794 | printk(version); | ||
1795 | #endif | ||
1796 | |||
1797 | err = pci_enable_device(pdev); | ||
1798 | if (err) { | ||
1799 | printk(KERN_ERR "%s (adm8211): Cannot enable new PCI device\n", | ||
1800 | pci_name(pdev)); | ||
1801 | return err; | ||
1802 | } | ||
1803 | |||
1804 | io_addr = pci_resource_start(pdev, 0); | ||
1805 | io_len = pci_resource_len(pdev, 0); | ||
1806 | mem_addr = pci_resource_start(pdev, 1); | ||
1807 | mem_len = pci_resource_len(pdev, 1); | ||
1808 | if (io_len < 256 || mem_len < 1024) { | ||
1809 | printk(KERN_ERR "%s (adm8211): Too short PCI resources\n", | ||
1810 | pci_name(pdev)); | ||
1811 | goto err_disable_pdev; | ||
1812 | } | ||
1813 | |||
1814 | |||
1815 | /* check signature */ | ||
1816 | pci_read_config_dword(pdev, 0x80 /* CR32 */, ®); | ||
1817 | if (reg != ADM8211_SIG1 && reg != ADM8211_SIG2) { | ||
1818 | printk(KERN_ERR "%s (adm8211): Invalid signature (0x%x)\n", | ||
1819 | pci_name(pdev), reg); | ||
1820 | goto err_disable_pdev; | ||
1821 | } | ||
1822 | |||
1823 | err = pci_request_regions(pdev, "adm8211"); | ||
1824 | if (err) { | ||
1825 | printk(KERN_ERR "%s (adm8211): Cannot obtain PCI resources\n", | ||
1826 | pci_name(pdev)); | ||
1827 | return err; /* someone else grabbed it? don't disable it */ | ||
1828 | } | ||
1829 | |||
1830 | if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) || | ||
1831 | pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { | ||
1832 | printk(KERN_ERR "%s (adm8211): No suitable DMA available\n", | ||
1833 | pci_name(pdev)); | ||
1834 | goto err_free_reg; | ||
1835 | } | ||
1836 | |||
1837 | pci_set_master(pdev); | ||
1838 | |||
1839 | dev = ieee80211_alloc_hw(sizeof(*priv), &adm8211_ops); | ||
1840 | if (!dev) { | ||
1841 | printk(KERN_ERR "%s (adm8211): ieee80211 alloc failed\n", | ||
1842 | pci_name(pdev)); | ||
1843 | err = -ENOMEM; | ||
1844 | goto err_free_reg; | ||
1845 | } | ||
1846 | priv = dev->priv; | ||
1847 | priv->pdev = pdev; | ||
1848 | |||
1849 | spin_lock_init(&priv->lock); | ||
1850 | |||
1851 | SET_IEEE80211_DEV(dev, &pdev->dev); | ||
1852 | |||
1853 | pci_set_drvdata(pdev, dev); | ||
1854 | |||
1855 | priv->map = pci_iomap(pdev, 1, mem_len); | ||
1856 | if (!priv->map) | ||
1857 | priv->map = pci_iomap(pdev, 0, io_len); | ||
1858 | |||
1859 | if (!priv->map) { | ||
1860 | printk(KERN_ERR "%s (adm8211): Cannot map device memory\n", | ||
1861 | pci_name(pdev)); | ||
1862 | goto err_free_dev; | ||
1863 | } | ||
1864 | |||
1865 | priv->rx_ring_size = rx_ring_size; | ||
1866 | priv->tx_ring_size = tx_ring_size; | ||
1867 | |||
1868 | if (adm8211_alloc_rings(dev)) { | ||
1869 | printk(KERN_ERR "%s (adm8211): Cannot allocate TX/RX ring\n", | ||
1870 | pci_name(pdev)); | ||
1871 | goto err_iounmap; | ||
1872 | } | ||
1873 | |||
1874 | pci_read_config_byte(pdev, PCI_CLASS_REVISION, &priv->revid); | ||
1875 | |||
1876 | *(u32 *)perm_addr = le32_to_cpu((__force __le32)ADM8211_CSR_READ(PAR0)); | ||
1877 | *(u16 *)&perm_addr[4] = | ||
1878 | le16_to_cpu((__force __le16)ADM8211_CSR_READ(PAR1) & 0xFFFF); | ||
1879 | |||
1880 | if (!is_valid_ether_addr(perm_addr)) { | ||
1881 | printk(KERN_WARNING "%s (adm8211): Invalid hwaddr in EEPROM!\n", | ||
1882 | pci_name(pdev)); | ||
1883 | random_ether_addr(perm_addr); | ||
1884 | } | ||
1885 | SET_IEEE80211_PERM_ADDR(dev, perm_addr); | ||
1886 | |||
1887 | dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr); | ||
1888 | dev->flags = IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED; | ||
1889 | /* IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */ | ||
1890 | |||
1891 | dev->channel_change_time = 1000; | ||
1892 | dev->max_rssi = 100; /* FIXME: find better value */ | ||
1893 | |||
1894 | priv->modes[0].mode = MODE_IEEE80211B; | ||
1895 | /* channel info filled in by adm8211_read_eeprom */ | ||
1896 | memcpy(priv->rates, adm8211_rates, sizeof(adm8211_rates)); | ||
1897 | priv->modes[0].num_rates = ARRAY_SIZE(adm8211_rates); | ||
1898 | priv->modes[0].rates = priv->rates; | ||
1899 | |||
1900 | dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */ | ||
1901 | |||
1902 | priv->retry_limit = 3; | ||
1903 | priv->ant_power = 0x40; | ||
1904 | priv->tx_power = 0x40; | ||
1905 | priv->lpf_cutoff = 0xFF; | ||
1906 | priv->lnags_threshold = 0xFF; | ||
1907 | priv->mode = IEEE80211_IF_TYPE_MGMT; | ||
1908 | |||
1909 | /* Power-on issue. EEPROM won't read correctly without */ | ||
1910 | if (priv->revid >= ADM8211_REV_BA) { | ||
1911 | ADM8211_CSR_WRITE(FRCTL, 0); | ||
1912 | ADM8211_CSR_READ(FRCTL); | ||
1913 | ADM8211_CSR_WRITE(FRCTL, 1); | ||
1914 | ADM8211_CSR_READ(FRCTL); | ||
1915 | msleep(100); | ||
1916 | } | ||
1917 | |||
1918 | err = adm8211_read_eeprom(dev); | ||
1919 | if (err) { | ||
1920 | printk(KERN_ERR "%s (adm8211): Can't alloc eeprom buffer\n", | ||
1921 | pci_name(pdev)); | ||
1922 | goto err_free_desc; | ||
1923 | } | ||
1924 | |||
1925 | priv->channel = priv->modes[0].channels[0].chan; | ||
1926 | |||
1927 | err = ieee80211_register_hwmode(dev, &priv->modes[0]); | ||
1928 | if (err) { | ||
1929 | printk(KERN_ERR "%s (adm8211): Can't register hwmode\n", | ||
1930 | pci_name(pdev)); | ||
1931 | goto err_free_desc; | ||
1932 | } | ||
1933 | |||
1934 | err = ieee80211_register_hw(dev); | ||
1935 | if (err) { | ||
1936 | printk(KERN_ERR "%s (adm8211): Cannot register device\n", | ||
1937 | pci_name(pdev)); | ||
1938 | goto err_free_desc; | ||
1939 | } | ||
1940 | |||
1941 | printk(KERN_INFO "%s: hwaddr " MAC_FMT ", Rev 0x%02x\n", | ||
1942 | wiphy_name(dev->wiphy), MAC_ARG(dev->wiphy->perm_addr), | ||
1943 | priv->revid); | ||
1944 | |||
1945 | return 0; | ||
1946 | |||
1947 | err_free_desc: | ||
1948 | pci_free_consistent(pdev, | ||
1949 | sizeof(struct adm8211_desc) * priv->rx_ring_size + | ||
1950 | sizeof(struct adm8211_desc) * priv->tx_ring_size, | ||
1951 | priv->rx_ring, priv->rx_ring_dma); | ||
1952 | kfree(priv->rx_buffers); | ||
1953 | |||
1954 | err_iounmap: | ||
1955 | pci_iounmap(pdev, priv->map); | ||
1956 | |||
1957 | err_free_dev: | ||
1958 | pci_set_drvdata(pdev, NULL); | ||
1959 | ieee80211_free_hw(dev); | ||
1960 | |||
1961 | err_free_reg: | ||
1962 | pci_release_regions(pdev); | ||
1963 | |||
1964 | err_disable_pdev: | ||
1965 | pci_disable_device(pdev); | ||
1966 | return err; | ||
1967 | } | ||
1968 | |||
1969 | |||
1970 | static void __devexit adm8211_remove(struct pci_dev *pdev) | ||
1971 | { | ||
1972 | struct ieee80211_hw *dev = pci_get_drvdata(pdev); | ||
1973 | struct adm8211_priv *priv; | ||
1974 | |||
1975 | if (!dev) | ||
1976 | return; | ||
1977 | |||
1978 | ieee80211_unregister_hw(dev); | ||
1979 | |||
1980 | priv = dev->priv; | ||
1981 | |||
1982 | pci_free_consistent(pdev, | ||
1983 | sizeof(struct adm8211_desc) * priv->rx_ring_size + | ||
1984 | sizeof(struct adm8211_desc) * priv->tx_ring_size, | ||
1985 | priv->rx_ring, priv->rx_ring_dma); | ||
1986 | |||
1987 | kfree(priv->rx_buffers); | ||
1988 | kfree(priv->eeprom); | ||
1989 | pci_iounmap(pdev, priv->map); | ||
1990 | pci_release_regions(pdev); | ||
1991 | pci_disable_device(pdev); | ||
1992 | ieee80211_free_hw(dev); | ||
1993 | } | ||
1994 | |||
1995 | |||
1996 | #ifdef CONFIG_PM | ||
1997 | static int adm8211_suspend(struct pci_dev *pdev, pm_message_t state) | ||
1998 | { | ||
1999 | struct ieee80211_hw *dev = pci_get_drvdata(pdev); | ||
2000 | struct adm8211_priv *priv = dev->priv; | ||
2001 | |||
2002 | if (priv->mode != IEEE80211_IF_TYPE_MGMT) { | ||
2003 | ieee80211_stop_queues(dev); | ||
2004 | adm8211_stop(dev); | ||
2005 | } | ||
2006 | |||
2007 | pci_save_state(pdev); | ||
2008 | pci_set_power_state(pdev, pci_choose_state(pdev, state)); | ||
2009 | return 0; | ||
2010 | } | ||
2011 | |||
2012 | static int adm8211_resume(struct pci_dev *pdev) | ||
2013 | { | ||
2014 | struct ieee80211_hw *dev = pci_get_drvdata(pdev); | ||
2015 | struct adm8211_priv *priv = dev->priv; | ||
2016 | |||
2017 | pci_set_power_state(pdev, PCI_D0); | ||
2018 | pci_restore_state(pdev); | ||
2019 | |||
2020 | if (priv->mode != IEEE80211_IF_TYPE_MGMT) { | ||
2021 | adm8211_open(dev); | ||
2022 | ieee80211_start_queues(dev); | ||
2023 | } | ||
2024 | |||
2025 | return 0; | ||
2026 | } | ||
2027 | #endif /* CONFIG_PM */ | ||
2028 | |||
2029 | |||
2030 | MODULE_DEVICE_TABLE(pci, adm8211_pci_id_table); | ||
2031 | |||
2032 | /* TODO: implement enable_wake */ | ||
2033 | static struct pci_driver adm8211_driver = { | ||
2034 | .name = "adm8211", | ||
2035 | .id_table = adm8211_pci_id_table, | ||
2036 | .probe = adm8211_probe, | ||
2037 | .remove = __devexit_p(adm8211_remove), | ||
2038 | #ifdef CONFIG_PM | ||
2039 | .suspend = adm8211_suspend, | ||
2040 | .resume = adm8211_resume, | ||
2041 | #endif /* CONFIG_PM */ | ||
2042 | }; | ||
2043 | |||
2044 | |||
2045 | |||
2046 | static int __init adm8211_init(void) | ||
2047 | { | ||
2048 | #ifdef MODULE | ||
2049 | printk(version); | ||
2050 | #endif | ||
2051 | |||
2052 | return pci_register_driver(&adm8211_driver); | ||
2053 | } | ||
2054 | |||
2055 | |||
2056 | static void __exit adm8211_exit(void) | ||
2057 | { | ||
2058 | pci_unregister_driver(&adm8211_driver); | ||
2059 | } | ||
2060 | |||
2061 | |||
2062 | module_init(adm8211_init); | ||
2063 | module_exit(adm8211_exit); | ||
diff --git a/drivers/net/wireless/adm8211.h b/drivers/net/wireless/adm8211.h new file mode 100644 index 000000000000..795d895f5c99 --- /dev/null +++ b/drivers/net/wireless/adm8211.h | |||
@@ -0,0 +1,659 @@ | |||
1 | #ifndef ADM8211_H | ||
2 | #define ADM8211_H | ||
3 | |||
4 | /* ADM8211 Registers */ | ||
5 | |||
6 | /* CR32 (SIG) signature */ | ||
7 | #define ADM8211_SIG1 0x82011317 /* ADM8211A */ | ||
8 | #define ADM8211_SIG2 0x82111317 /* ADM8211B/ADM8211C */ | ||
9 | |||
10 | #define ADM8211_CSR_READ(r) ioread32(&priv->map->r) | ||
11 | #define ADM8211_CSR_WRITE(r, val) iowrite32((val), &priv->map->r) | ||
12 | |||
13 | /* CSR (Host Control and Status Registers) */ | ||
14 | struct adm8211_csr { | ||
15 | __le32 PAR; /* 0x00 CSR0 */ | ||
16 | __le32 FRCTL; /* 0x04 CSR0A */ | ||
17 | __le32 TDR; /* 0x08 CSR1 */ | ||
18 | __le32 WTDP; /* 0x0C CSR1A */ | ||
19 | __le32 RDR; /* 0x10 CSR2 */ | ||
20 | __le32 WRDP; /* 0x14 CSR2A */ | ||
21 | __le32 RDB; /* 0x18 CSR3 */ | ||
22 | __le32 TDBH; /* 0x1C CSR3A */ | ||
23 | __le32 TDBD; /* 0x20 CSR4 */ | ||
24 | __le32 TDBP; /* 0x24 CSR4A */ | ||
25 | __le32 STSR; /* 0x28 CSR5 */ | ||
26 | __le32 TDBB; /* 0x2C CSR5A */ | ||
27 | __le32 NAR; /* 0x30 CSR6 */ | ||
28 | __le32 CSR6A; /* reserved */ | ||
29 | __le32 IER; /* 0x38 CSR7 */ | ||
30 | __le32 TKIPSCEP; /* 0x3C CSR7A */ | ||
31 | __le32 LPC; /* 0x40 CSR8 */ | ||
32 | __le32 CSR_TEST1; /* 0x44 CSR8A */ | ||
33 | __le32 SPR; /* 0x48 CSR9 */ | ||
34 | __le32 CSR_TEST0; /* 0x4C CSR9A */ | ||
35 | __le32 WCSR; /* 0x50 CSR10 */ | ||
36 | __le32 WPDR; /* 0x54 CSR10A */ | ||
37 | __le32 GPTMR; /* 0x58 CSR11 */ | ||
38 | __le32 GPIO; /* 0x5C CSR11A */ | ||
39 | __le32 BBPCTL; /* 0x60 CSR12 */ | ||
40 | __le32 SYNCTL; /* 0x64 CSR12A */ | ||
41 | __le32 PLCPHD; /* 0x68 CSR13 */ | ||
42 | __le32 MMIWA; /* 0x6C CSR13A */ | ||
43 | __le32 MMIRD0; /* 0x70 CSR14 */ | ||
44 | __le32 MMIRD1; /* 0x74 CSR14A */ | ||
45 | __le32 TXBR; /* 0x78 CSR15 */ | ||
46 | __le32 SYNDATA; /* 0x7C CSR15A */ | ||
47 | __le32 ALCS; /* 0x80 CSR16 */ | ||
48 | __le32 TOFS2; /* 0x84 CSR17 */ | ||
49 | __le32 CMDR; /* 0x88 CSR18 */ | ||
50 | __le32 PCIC; /* 0x8C CSR19 */ | ||
51 | __le32 PMCSR; /* 0x90 CSR20 */ | ||
52 | __le32 PAR0; /* 0x94 CSR21 */ | ||
53 | __le32 PAR1; /* 0x98 CSR22 */ | ||
54 | __le32 MAR0; /* 0x9C CSR23 */ | ||
55 | __le32 MAR1; /* 0xA0 CSR24 */ | ||
56 | __le32 ATIMDA0; /* 0xA4 CSR25 */ | ||
57 | __le32 ABDA1; /* 0xA8 CSR26 */ | ||
58 | __le32 BSSID0; /* 0xAC CSR27 */ | ||
59 | __le32 TXLMT; /* 0xB0 CSR28 */ | ||
60 | __le32 MIBCNT; /* 0xB4 CSR29 */ | ||
61 | __le32 BCNT; /* 0xB8 CSR30 */ | ||
62 | __le32 TSFTH; /* 0xBC CSR31 */ | ||
63 | __le32 TSC; /* 0xC0 CSR32 */ | ||
64 | __le32 SYNRF; /* 0xC4 CSR33 */ | ||
65 | __le32 BPLI; /* 0xC8 CSR34 */ | ||
66 | __le32 CAP0; /* 0xCC CSR35 */ | ||
67 | __le32 CAP1; /* 0xD0 CSR36 */ | ||
68 | __le32 RMD; /* 0xD4 CSR37 */ | ||
69 | __le32 CFPP; /* 0xD8 CSR38 */ | ||
70 | __le32 TOFS0; /* 0xDC CSR39 */ | ||
71 | __le32 TOFS1; /* 0xE0 CSR40 */ | ||
72 | __le32 IFST; /* 0xE4 CSR41 */ | ||
73 | __le32 RSPT; /* 0xE8 CSR42 */ | ||
74 | __le32 TSFTL; /* 0xEC CSR43 */ | ||
75 | __le32 WEPCTL; /* 0xF0 CSR44 */ | ||
76 | __le32 WESK; /* 0xF4 CSR45 */ | ||
77 | __le32 WEPCNT; /* 0xF8 CSR46 */ | ||
78 | __le32 MACTEST; /* 0xFC CSR47 */ | ||
79 | __le32 FER; /* 0x100 */ | ||
80 | __le32 FEMR; /* 0x104 */ | ||
81 | __le32 FPSR; /* 0x108 */ | ||
82 | __le32 FFER; /* 0x10C */ | ||
83 | } __attribute__ ((packed)); | ||
84 | |||
85 | /* CSR0 - PAR (PCI Address Register) */ | ||
86 | #define ADM8211_PAR_MWIE (1 << 24) | ||
87 | #define ADM8211_PAR_MRLE (1 << 23) | ||
88 | #define ADM8211_PAR_MRME (1 << 21) | ||
89 | #define ADM8211_PAR_RAP ((1 << 18) | (1 << 17)) | ||
90 | #define ADM8211_PAR_CAL ((1 << 15) | (1 << 14)) | ||
91 | #define ADM8211_PAR_PBL 0x00003f00 | ||
92 | #define ADM8211_PAR_BLE (1 << 7) | ||
93 | #define ADM8211_PAR_DSL 0x0000007c | ||
94 | #define ADM8211_PAR_BAR (1 << 1) | ||
95 | #define ADM8211_PAR_SWR (1 << 0) | ||
96 | |||
97 | /* CSR1 - FRCTL (Frame Control Register) */ | ||
98 | #define ADM8211_FRCTL_PWRMGT (1 << 31) | ||
99 | #define ADM8211_FRCTL_MAXPSP (1 << 27) | ||
100 | #define ADM8211_FRCTL_DRVPRSP (1 << 26) | ||
101 | #define ADM8211_FRCTL_DRVBCON (1 << 25) | ||
102 | #define ADM8211_FRCTL_AID 0x0000ffff | ||
103 | #define ADM8211_FRCTL_AID_ON 0x0000c000 | ||
104 | |||
105 | /* CSR5 - STSR (Status Register) */ | ||
106 | #define ADM8211_STSR_PCF (1 << 31) | ||
107 | #define ADM8211_STSR_BCNTC (1 << 30) | ||
108 | #define ADM8211_STSR_GPINT (1 << 29) | ||
109 | #define ADM8211_STSR_LinkOff (1 << 28) | ||
110 | #define ADM8211_STSR_ATIMTC (1 << 27) | ||
111 | #define ADM8211_STSR_TSFTF (1 << 26) | ||
112 | #define ADM8211_STSR_TSCZ (1 << 25) | ||
113 | #define ADM8211_STSR_LinkOn (1 << 24) | ||
114 | #define ADM8211_STSR_SQL (1 << 23) | ||
115 | #define ADM8211_STSR_WEPTD (1 << 22) | ||
116 | #define ADM8211_STSR_ATIME (1 << 21) | ||
117 | #define ADM8211_STSR_TBTT (1 << 20) | ||
118 | #define ADM8211_STSR_NISS (1 << 16) | ||
119 | #define ADM8211_STSR_AISS (1 << 15) | ||
120 | #define ADM8211_STSR_TEIS (1 << 14) | ||
121 | #define ADM8211_STSR_FBE (1 << 13) | ||
122 | #define ADM8211_STSR_REIS (1 << 12) | ||
123 | #define ADM8211_STSR_GPTT (1 << 11) | ||
124 | #define ADM8211_STSR_RPS (1 << 8) | ||
125 | #define ADM8211_STSR_RDU (1 << 7) | ||
126 | #define ADM8211_STSR_RCI (1 << 6) | ||
127 | #define ADM8211_STSR_TUF (1 << 5) | ||
128 | #define ADM8211_STSR_TRT (1 << 4) | ||
129 | #define ADM8211_STSR_TLT (1 << 3) | ||
130 | #define ADM8211_STSR_TDU (1 << 2) | ||
131 | #define ADM8211_STSR_TPS (1 << 1) | ||
132 | #define ADM8211_STSR_TCI (1 << 0) | ||
133 | |||
134 | /* CSR6 - NAR (Network Access Register) */ | ||
135 | #define ADM8211_NAR_TXCF (1 << 31) | ||
136 | #define ADM8211_NAR_HF (1 << 30) | ||
137 | #define ADM8211_NAR_UTR (1 << 29) | ||
138 | #define ADM8211_NAR_SQ (1 << 28) | ||
139 | #define ADM8211_NAR_CFP (1 << 27) | ||
140 | #define ADM8211_NAR_SF (1 << 21) | ||
141 | #define ADM8211_NAR_TR ((1 << 15) | (1 << 14)) | ||
142 | #define ADM8211_NAR_ST (1 << 13) | ||
143 | #define ADM8211_NAR_OM ((1 << 11) | (1 << 10)) | ||
144 | #define ADM8211_NAR_MM (1 << 7) | ||
145 | #define ADM8211_NAR_PR (1 << 6) | ||
146 | #define ADM8211_NAR_EA (1 << 5) | ||
147 | #define ADM8211_NAR_PB (1 << 3) | ||
148 | #define ADM8211_NAR_STPDMA (1 << 2) | ||
149 | #define ADM8211_NAR_SR (1 << 1) | ||
150 | #define ADM8211_NAR_CTX (1 << 0) | ||
151 | |||
152 | #define ADM8211_IDLE() \ | ||
153 | do { \ | ||
154 | if (priv->nar & (ADM8211_NAR_SR | ADM8211_NAR_ST)) { \ | ||
155 | ADM8211_CSR_WRITE(NAR, priv->nar & \ | ||
156 | ~(ADM8211_NAR_SR | ADM8211_NAR_ST));\ | ||
157 | ADM8211_CSR_READ(NAR); \ | ||
158 | msleep(20); \ | ||
159 | } \ | ||
160 | } while (0) | ||
161 | |||
162 | #define ADM8211_IDLE_RX() \ | ||
163 | do { \ | ||
164 | if (priv->nar & ADM8211_NAR_SR) { \ | ||
165 | ADM8211_CSR_WRITE(NAR, priv->nar & ~ADM8211_NAR_SR); \ | ||
166 | ADM8211_CSR_READ(NAR); \ | ||
167 | mdelay(20); \ | ||
168 | } \ | ||
169 | } while (0) | ||
170 | |||
171 | #define ADM8211_RESTORE() \ | ||
172 | do { \ | ||
173 | if (priv->nar & (ADM8211_NAR_SR | ADM8211_NAR_ST)) \ | ||
174 | ADM8211_CSR_WRITE(NAR, priv->nar); \ | ||
175 | } while (0) | ||
176 | |||
177 | /* CSR7 - IER (Interrupt Enable Register) */ | ||
178 | #define ADM8211_IER_PCFIE (1 << 31) | ||
179 | #define ADM8211_IER_BCNTCIE (1 << 30) | ||
180 | #define ADM8211_IER_GPIE (1 << 29) | ||
181 | #define ADM8211_IER_LinkOffIE (1 << 28) | ||
182 | #define ADM8211_IER_ATIMTCIE (1 << 27) | ||
183 | #define ADM8211_IER_TSFTFIE (1 << 26) | ||
184 | #define ADM8211_IER_TSCZE (1 << 25) | ||
185 | #define ADM8211_IER_LinkOnIE (1 << 24) | ||
186 | #define ADM8211_IER_SQLIE (1 << 23) | ||
187 | #define ADM8211_IER_WEPIE (1 << 22) | ||
188 | #define ADM8211_IER_ATIMEIE (1 << 21) | ||
189 | #define ADM8211_IER_TBTTIE (1 << 20) | ||
190 | #define ADM8211_IER_NIE (1 << 16) | ||
191 | #define ADM8211_IER_AIE (1 << 15) | ||
192 | #define ADM8211_IER_TEIE (1 << 14) | ||
193 | #define ADM8211_IER_FBEIE (1 << 13) | ||
194 | #define ADM8211_IER_REIE (1 << 12) | ||
195 | #define ADM8211_IER_GPTIE (1 << 11) | ||
196 | #define ADM8211_IER_RSIE (1 << 8) | ||
197 | #define ADM8211_IER_RUIE (1 << 7) | ||
198 | #define ADM8211_IER_RCIE (1 << 6) | ||
199 | #define ADM8211_IER_TUIE (1 << 5) | ||
200 | #define ADM8211_IER_TRTIE (1 << 4) | ||
201 | #define ADM8211_IER_TLTTIE (1 << 3) | ||
202 | #define ADM8211_IER_TDUIE (1 << 2) | ||
203 | #define ADM8211_IER_TPSIE (1 << 1) | ||
204 | #define ADM8211_IER_TCIE (1 << 0) | ||
205 | |||
206 | /* CSR9 - SPR (Serial Port Register) */ | ||
207 | #define ADM8211_SPR_SRS (1 << 11) | ||
208 | #define ADM8211_SPR_SDO (1 << 3) | ||
209 | #define ADM8211_SPR_SDI (1 << 2) | ||
210 | #define ADM8211_SPR_SCLK (1 << 1) | ||
211 | #define ADM8211_SPR_SCS (1 << 0) | ||
212 | |||
213 | /* CSR9A - CSR_TEST0 */ | ||
214 | #define ADM8211_CSR_TEST0_EPNE (1 << 18) | ||
215 | #define ADM8211_CSR_TEST0_EPSNM (1 << 17) | ||
216 | #define ADM8211_CSR_TEST0_EPTYP (1 << 16) | ||
217 | #define ADM8211_CSR_TEST0_EPRLD (1 << 15) | ||
218 | |||
219 | /* CSR10 - WCSR (Wake-up Control/Status Register) */ | ||
220 | #define ADM8211_WCSR_CRCT (1 << 30) | ||
221 | #define ADM8211_WCSR_TSFTWE (1 << 20) | ||
222 | #define ADM8211_WCSR_TIMWE (1 << 19) | ||
223 | #define ADM8211_WCSR_ATIMWE (1 << 18) | ||
224 | #define ADM8211_WCSR_KEYWE (1 << 17) | ||
225 | #define ADM8211_WCSR_MPRE (1 << 9) | ||
226 | #define ADM8211_WCSR_LSOE (1 << 8) | ||
227 | #define ADM8211_WCSR_KEYUP (1 << 6) | ||
228 | #define ADM8211_WCSR_TSFTW (1 << 5) | ||
229 | #define ADM8211_WCSR_TIMW (1 << 4) | ||
230 | #define ADM8211_WCSR_ATIMW (1 << 3) | ||
231 | #define ADM8211_WCSR_MPR (1 << 1) | ||
232 | #define ADM8211_WCSR_LSO (1 << 0) | ||
233 | |||
234 | /* CSR11A - GPIO */ | ||
235 | #define ADM8211_CSR_GPIO_EN5 (1 << 17) | ||
236 | #define ADM8211_CSR_GPIO_EN4 (1 << 16) | ||
237 | #define ADM8211_CSR_GPIO_EN3 (1 << 15) | ||
238 | #define ADM8211_CSR_GPIO_EN2 (1 << 14) | ||
239 | #define ADM8211_CSR_GPIO_EN1 (1 << 13) | ||
240 | #define ADM8211_CSR_GPIO_EN0 (1 << 12) | ||
241 | #define ADM8211_CSR_GPIO_O5 (1 << 11) | ||
242 | #define ADM8211_CSR_GPIO_O4 (1 << 10) | ||
243 | #define ADM8211_CSR_GPIO_O3 (1 << 9) | ||
244 | #define ADM8211_CSR_GPIO_O2 (1 << 8) | ||
245 | #define ADM8211_CSR_GPIO_O1 (1 << 7) | ||
246 | #define ADM8211_CSR_GPIO_O0 (1 << 6) | ||
247 | #define ADM8211_CSR_GPIO_IN 0x0000003f | ||
248 | |||
249 | /* CSR12 - BBPCTL (BBP Control port) */ | ||
250 | #define ADM8211_BBPCTL_MMISEL (1 << 31) | ||
251 | #define ADM8211_BBPCTL_SPICADD (0x7F << 24) | ||
252 | #define ADM8211_BBPCTL_RF3000 (0x20 << 24) | ||
253 | #define ADM8211_BBPCTL_TXCE (1 << 23) | ||
254 | #define ADM8211_BBPCTL_RXCE (1 << 22) | ||
255 | #define ADM8211_BBPCTL_CCAP (1 << 21) | ||
256 | #define ADM8211_BBPCTL_TYPE 0x001c0000 | ||
257 | #define ADM8211_BBPCTL_WR (1 << 17) | ||
258 | #define ADM8211_BBPCTL_RD (1 << 16) | ||
259 | #define ADM8211_BBPCTL_ADDR 0x0000ff00 | ||
260 | #define ADM8211_BBPCTL_DATA 0x000000ff | ||
261 | |||
262 | /* CSR12A - SYNCTL (Synthesizer Control port) */ | ||
263 | #define ADM8211_SYNCTL_WR (1 << 31) | ||
264 | #define ADM8211_SYNCTL_RD (1 << 30) | ||
265 | #define ADM8211_SYNCTL_CS0 (1 << 29) | ||
266 | #define ADM8211_SYNCTL_CS1 (1 << 28) | ||
267 | #define ADM8211_SYNCTL_CAL (1 << 27) | ||
268 | #define ADM8211_SYNCTL_SELCAL (1 << 26) | ||
269 | #define ADM8211_SYNCTL_RFtype ((1 << 24) || (1 << 23) || (1 << 22)) | ||
270 | #define ADM8211_SYNCTL_RFMD (1 << 22) | ||
271 | #define ADM8211_SYNCTL_GENERAL (0x7 << 22) | ||
272 | /* SYNCTL 21:0 Data (Si4126: 18-bit data, 4-bit address) */ | ||
273 | |||
274 | /* CSR18 - CMDR (Command Register) */ | ||
275 | #define ADM8211_CMDR_PM (1 << 19) | ||
276 | #define ADM8211_CMDR_APM (1 << 18) | ||
277 | #define ADM8211_CMDR_RTE (1 << 4) | ||
278 | #define ADM8211_CMDR_DRT ((1 << 3) | (1 << 2)) | ||
279 | #define ADM8211_CMDR_DRT_8DW (0x0 << 2) | ||
280 | #define ADM8211_CMDR_DRT_16DW (0x1 << 2) | ||
281 | #define ADM8211_CMDR_DRT_SF (0x2 << 2) | ||
282 | |||
283 | /* CSR33 - SYNRF (SYNRF direct control) */ | ||
284 | #define ADM8211_SYNRF_SELSYN (1 << 31) | ||
285 | #define ADM8211_SYNRF_SELRF (1 << 30) | ||
286 | #define ADM8211_SYNRF_LERF (1 << 29) | ||
287 | #define ADM8211_SYNRF_LEIF (1 << 28) | ||
288 | #define ADM8211_SYNRF_SYNCLK (1 << 27) | ||
289 | #define ADM8211_SYNRF_SYNDATA (1 << 26) | ||
290 | #define ADM8211_SYNRF_PE1 (1 << 25) | ||
291 | #define ADM8211_SYNRF_PE2 (1 << 24) | ||
292 | #define ADM8211_SYNRF_PA_PE (1 << 23) | ||
293 | #define ADM8211_SYNRF_TR_SW (1 << 22) | ||
294 | #define ADM8211_SYNRF_TR_SWN (1 << 21) | ||
295 | #define ADM8211_SYNRF_RADIO (1 << 20) | ||
296 | #define ADM8211_SYNRF_CAL_EN (1 << 19) | ||
297 | #define ADM8211_SYNRF_PHYRST (1 << 18) | ||
298 | |||
299 | #define ADM8211_SYNRF_IF_SELECT_0 (1 << 31) | ||
300 | #define ADM8211_SYNRF_IF_SELECT_1 ((1 << 31) | (1 << 28)) | ||
301 | #define ADM8211_SYNRF_WRITE_SYNDATA_0 (1 << 31) | ||
302 | #define ADM8211_SYNRF_WRITE_SYNDATA_1 ((1 << 31) | (1 << 26)) | ||
303 | #define ADM8211_SYNRF_WRITE_CLOCK_0 (1 << 31) | ||
304 | #define ADM8211_SYNRF_WRITE_CLOCK_1 ((1 << 31) | (1 << 27)) | ||
305 | |||
306 | /* CSR44 - WEPCTL (WEP Control) */ | ||
307 | #define ADM8211_WEPCTL_WEPENABLE (1 << 31) | ||
308 | #define ADM8211_WEPCTL_WPAENABLE (1 << 30) | ||
309 | #define ADM8211_WEPCTL_CURRENT_TABLE (1 << 29) | ||
310 | #define ADM8211_WEPCTL_TABLE_WR (1 << 28) | ||
311 | #define ADM8211_WEPCTL_TABLE_RD (1 << 27) | ||
312 | #define ADM8211_WEPCTL_WEPRXBYP (1 << 25) | ||
313 | #define ADM8211_WEPCTL_SEL_WEPTABLE (1 << 23) | ||
314 | #define ADM8211_WEPCTL_ADDR (0x000001ff) | ||
315 | |||
316 | /* CSR45 - WESK (Data Entry for Share/Individual Key) */ | ||
317 | #define ADM8211_WESK_DATA (0x0000ffff) | ||
318 | |||
319 | /* FER (Function Event Register) */ | ||
320 | #define ADM8211_FER_INTR_EV_ENT (1 << 15) | ||
321 | |||
322 | |||
323 | /* Si4126 RF Synthesizer - Control Registers */ | ||
324 | #define SI4126_MAIN_CONF 0 | ||
325 | #define SI4126_PHASE_DET_GAIN 1 | ||
326 | #define SI4126_POWERDOWN 2 | ||
327 | #define SI4126_RF1_N_DIV 3 /* only Si4136 */ | ||
328 | #define SI4126_RF2_N_DIV 4 | ||
329 | #define SI4126_IF_N_DIV 5 | ||
330 | #define SI4126_RF1_R_DIV 6 /* only Si4136 */ | ||
331 | #define SI4126_RF2_R_DIV 7 | ||
332 | #define SI4126_IF_R_DIV 8 | ||
333 | |||
334 | /* Main Configuration */ | ||
335 | #define SI4126_MAIN_XINDIV2 (1 << 6) | ||
336 | #define SI4126_MAIN_IFDIV ((1 << 11) | (1 << 10)) | ||
337 | /* Powerdown */ | ||
338 | #define SI4126_POWERDOWN_PDIB (1 << 1) | ||
339 | #define SI4126_POWERDOWN_PDRB (1 << 0) | ||
340 | |||
341 | |||
342 | /* RF3000 BBP - Control Port Registers */ | ||
343 | /* 0x00 - reserved */ | ||
344 | #define RF3000_MODEM_CTRL__RX_STATUS 0x01 | ||
345 | #define RF3000_CCA_CTRL 0x02 | ||
346 | #define RF3000_DIVERSITY__RSSI 0x03 | ||
347 | #define RF3000_RX_SIGNAL_FIELD 0x04 | ||
348 | #define RF3000_RX_LEN_MSB 0x05 | ||
349 | #define RF3000_RX_LEN_LSB 0x06 | ||
350 | #define RF3000_RX_SERVICE_FIELD 0x07 | ||
351 | #define RF3000_TX_VAR_GAIN__TX_LEN_EXT 0x11 | ||
352 | #define RF3000_TX_LEN_MSB 0x12 | ||
353 | #define RF3000_TX_LEN_LSB 0x13 | ||
354 | #define RF3000_LOW_GAIN_CALIB 0x14 | ||
355 | #define RF3000_HIGH_GAIN_CALIB 0x15 | ||
356 | |||
357 | /* ADM8211 revisions */ | ||
358 | #define ADM8211_REV_AB 0x11 | ||
359 | #define ADM8211_REV_AF 0x15 | ||
360 | #define ADM8211_REV_BA 0x20 | ||
361 | #define ADM8211_REV_CA 0x30 | ||
362 | |||
363 | struct adm8211_desc { | ||
364 | __le32 status; | ||
365 | __le32 length; | ||
366 | __le32 buffer1; | ||
367 | __le32 buffer2; | ||
368 | }; | ||
369 | |||
370 | #define RDES0_STATUS_OWN (1 << 31) | ||
371 | #define RDES0_STATUS_ES (1 << 30) | ||
372 | #define RDES0_STATUS_SQL (1 << 29) | ||
373 | #define RDES0_STATUS_DE (1 << 28) | ||
374 | #define RDES0_STATUS_FS (1 << 27) | ||
375 | #define RDES0_STATUS_LS (1 << 26) | ||
376 | #define RDES0_STATUS_PCF (1 << 25) | ||
377 | #define RDES0_STATUS_SFDE (1 << 24) | ||
378 | #define RDES0_STATUS_SIGE (1 << 23) | ||
379 | #define RDES0_STATUS_CRC16E (1 << 22) | ||
380 | #define RDES0_STATUS_RXTOE (1 << 21) | ||
381 | #define RDES0_STATUS_CRC32E (1 << 20) | ||
382 | #define RDES0_STATUS_ICVE (1 << 19) | ||
383 | #define RDES0_STATUS_DA1 (1 << 17) | ||
384 | #define RDES0_STATUS_DA0 (1 << 16) | ||
385 | #define RDES0_STATUS_RXDR ((1 << 15) | (1 << 14) | (1 << 13) | (1 << 12)) | ||
386 | #define RDES0_STATUS_FL (0x00000fff) | ||
387 | |||
388 | #define RDES1_CONTROL_RER (1 << 25) | ||
389 | #define RDES1_CONTROL_RCH (1 << 24) | ||
390 | #define RDES1_CONTROL_RBS2 (0x00fff000) | ||
391 | #define RDES1_CONTROL_RBS1 (0x00000fff) | ||
392 | |||
393 | #define RDES1_STATUS_RSSI (0x0000007f) | ||
394 | |||
395 | |||
396 | #define TDES0_CONTROL_OWN (1 << 31) | ||
397 | #define TDES0_CONTROL_DONE (1 << 30) | ||
398 | #define TDES0_CONTROL_TXDR (0x0ff00000) | ||
399 | |||
400 | #define TDES0_STATUS_OWN (1 << 31) | ||
401 | #define TDES0_STATUS_DONE (1 << 30) | ||
402 | #define TDES0_STATUS_ES (1 << 29) | ||
403 | #define TDES0_STATUS_TLT (1 << 28) | ||
404 | #define TDES0_STATUS_TRT (1 << 27) | ||
405 | #define TDES0_STATUS_TUF (1 << 26) | ||
406 | #define TDES0_STATUS_TRO (1 << 25) | ||
407 | #define TDES0_STATUS_SOFBR (1 << 24) | ||
408 | #define TDES0_STATUS_ACR (0x00000fff) | ||
409 | |||
410 | #define TDES1_CONTROL_IC (1 << 31) | ||
411 | #define TDES1_CONTROL_LS (1 << 30) | ||
412 | #define TDES1_CONTROL_FS (1 << 29) | ||
413 | #define TDES1_CONTROL_TER (1 << 25) | ||
414 | #define TDES1_CONTROL_TCH (1 << 24) | ||
415 | #define TDES1_CONTROL_RBS2 (0x00fff000) | ||
416 | #define TDES1_CONTROL_RBS1 (0x00000fff) | ||
417 | |||
418 | /* SRAM offsets */ | ||
419 | #define ADM8211_SRAM(x) (priv->revid < ADM8211_REV_BA ? \ | ||
420 | ADM8211_SRAM_A_ ## x : ADM8211_SRAM_B_ ## x) | ||
421 | |||
422 | #define ADM8211_SRAM_INDIV_KEY 0x0000 | ||
423 | #define ADM8211_SRAM_A_SHARE_KEY 0x0160 | ||
424 | #define ADM8211_SRAM_B_SHARE_KEY 0x00c0 | ||
425 | |||
426 | #define ADM8211_SRAM_A_SSID 0x0180 | ||
427 | #define ADM8211_SRAM_B_SSID 0x00d4 | ||
428 | #define ADM8211_SRAM_SSID ADM8211_SRAM(SSID) | ||
429 | |||
430 | #define ADM8211_SRAM_A_SUPP_RATE 0x0191 | ||
431 | #define ADM8211_SRAM_B_SUPP_RATE 0x00dd | ||
432 | #define ADM8211_SRAM_SUPP_RATE ADM8211_SRAM(SUPP_RATE) | ||
433 | |||
434 | #define ADM8211_SRAM_A_SIZE 0x0200 | ||
435 | #define ADM8211_SRAM_B_SIZE 0x01c0 | ||
436 | #define ADM8211_SRAM_SIZE ADM8211_SRAM(SIZE) | ||
437 | |||
438 | struct adm8211_rx_ring_info { | ||
439 | struct sk_buff *skb; | ||
440 | dma_addr_t mapping; | ||
441 | }; | ||
442 | |||
443 | struct adm8211_tx_ring_info { | ||
444 | struct sk_buff *skb; | ||
445 | dma_addr_t mapping; | ||
446 | struct ieee80211_tx_control tx_control; | ||
447 | size_t hdrlen; | ||
448 | }; | ||
449 | |||
450 | #define PLCP_SIGNAL_1M 0x0a | ||
451 | #define PLCP_SIGNAL_2M 0x14 | ||
452 | #define PLCP_SIGNAL_5M5 0x37 | ||
453 | #define PLCP_SIGNAL_11M 0x6e | ||
454 | |||
455 | struct adm8211_tx_hdr { | ||
456 | u8 da[6]; | ||
457 | u8 signal; /* PLCP signal / TX rate in 100 Kbps */ | ||
458 | u8 service; | ||
459 | __le16 frame_body_size; | ||
460 | __le16 frame_control; | ||
461 | __le16 plcp_frag_tail_len; | ||
462 | __le16 plcp_frag_head_len; | ||
463 | __le16 dur_frag_tail; | ||
464 | __le16 dur_frag_head; | ||
465 | u8 addr4[6]; | ||
466 | |||
467 | #define ADM8211_TXHDRCTL_SHORT_PREAMBLE (1 << 0) | ||
468 | #define ADM8211_TXHDRCTL_MORE_FRAG (1 << 1) | ||
469 | #define ADM8211_TXHDRCTL_MORE_DATA (1 << 2) | ||
470 | #define ADM8211_TXHDRCTL_FRAG_NO (1 << 3) /* ? */ | ||
471 | #define ADM8211_TXHDRCTL_ENABLE_RTS (1 << 4) | ||
472 | #define ADM8211_TXHDRCTL_ENABLE_WEP_ENGINE (1 << 5) | ||
473 | #define ADM8211_TXHDRCTL_ENABLE_EXTEND_HEADER (1 << 15) /* ? */ | ||
474 | __le16 header_control; | ||
475 | __le16 frag; | ||
476 | u8 reserved_0; | ||
477 | u8 retry_limit; | ||
478 | |||
479 | u32 wep2key0; | ||
480 | u32 wep2key1; | ||
481 | u32 wep2key2; | ||
482 | u32 wep2key3; | ||
483 | |||
484 | u8 keyid; | ||
485 | u8 entry_control; // huh?? | ||
486 | u16 reserved_1; | ||
487 | u32 reserved_2; | ||
488 | } __attribute__ ((packed)); | ||
489 | |||
490 | |||
491 | #define RX_COPY_BREAK 128 | ||
492 | #define RX_PKT_SIZE 2500 | ||
493 | |||
494 | struct adm8211_eeprom { | ||
495 | __le16 signature; /* 0x00 */ | ||
496 | u8 major_version; /* 0x02 */ | ||
497 | u8 minor_version; /* 0x03 */ | ||
498 | u8 reserved_1[4]; /* 0x04 */ | ||
499 | u8 hwaddr[6]; /* 0x08 */ | ||
500 | u8 reserved_2[8]; /* 0x1E */ | ||
501 | __le16 cr49; /* 0x16 */ | ||
502 | u8 cr03; /* 0x18 */ | ||
503 | u8 cr28; /* 0x19 */ | ||
504 | u8 cr29; /* 0x1A */ | ||
505 | u8 country_code; /* 0x1B */ | ||
506 | |||
507 | /* specific bbp types */ | ||
508 | #define ADM8211_BBP_RFMD3000 0x00 | ||
509 | #define ADM8211_BBP_RFMD3002 0x01 | ||
510 | #define ADM8211_BBP_ADM8011 0x04 | ||
511 | u8 specific_bbptype; /* 0x1C */ | ||
512 | u8 specific_rftype; /* 0x1D */ | ||
513 | u8 reserved_3[2]; /* 0x1E */ | ||
514 | __le16 device_id; /* 0x20 */ | ||
515 | __le16 vendor_id; /* 0x22 */ | ||
516 | __le16 subsystem_id; /* 0x24 */ | ||
517 | __le16 subsystem_vendor_id; /* 0x26 */ | ||
518 | u8 maxlat; /* 0x28 */ | ||
519 | u8 mingnt; /* 0x29 */ | ||
520 | __le16 cis_pointer_low; /* 0x2A */ | ||
521 | __le16 cis_pointer_high; /* 0x2C */ | ||
522 | __le16 csr18; /* 0x2E */ | ||
523 | u8 reserved_4[16]; /* 0x30 */ | ||
524 | u8 d1_pwrdara; /* 0x40 */ | ||
525 | u8 d0_pwrdara; /* 0x41 */ | ||
526 | u8 d3_pwrdara; /* 0x42 */ | ||
527 | u8 d2_pwrdara; /* 0x43 */ | ||
528 | u8 antenna_power[14]; /* 0x44 */ | ||
529 | __le16 cis_wordcnt; /* 0x52 */ | ||
530 | u8 tx_power[14]; /* 0x54 */ | ||
531 | u8 lpf_cutoff[14]; /* 0x62 */ | ||
532 | u8 lnags_threshold[14]; /* 0x70 */ | ||
533 | __le16 checksum; /* 0x7E */ | ||
534 | u8 cis_data[0]; /* 0x80, 384 bytes */ | ||
535 | } __attribute__ ((packed)); | ||
536 | |||
537 | static const struct ieee80211_rate adm8211_rates[] = { | ||
538 | { .rate = 10, | ||
539 | .val = 10, | ||
540 | .val2 = -10, | ||
541 | .flags = IEEE80211_RATE_CCK_2 }, | ||
542 | { .rate = 20, | ||
543 | .val = 20, | ||
544 | .val2 = -20, | ||
545 | .flags = IEEE80211_RATE_CCK_2 }, | ||
546 | { .rate = 55, | ||
547 | .val = 55, | ||
548 | .val2 = -55, | ||
549 | .flags = IEEE80211_RATE_CCK_2 }, | ||
550 | { .rate = 110, | ||
551 | .val = 110, | ||
552 | .val2 = -110, | ||
553 | .flags = IEEE80211_RATE_CCK_2 } | ||
554 | }; | ||
555 | |||
556 | struct ieee80211_chan_range { | ||
557 | u8 min; | ||
558 | u8 max; | ||
559 | }; | ||
560 | |||
561 | static const struct ieee80211_channel adm8211_channels[] = { | ||
562 | { .chan = 1, | ||
563 | .freq = 2412}, | ||
564 | { .chan = 2, | ||
565 | .freq = 2417}, | ||
566 | { .chan = 3, | ||
567 | .freq = 2422}, | ||
568 | { .chan = 4, | ||
569 | .freq = 2427}, | ||
570 | { .chan = 5, | ||
571 | .freq = 2432}, | ||
572 | { .chan = 6, | ||
573 | .freq = 2437}, | ||
574 | { .chan = 7, | ||
575 | .freq = 2442}, | ||
576 | { .chan = 8, | ||
577 | .freq = 2447}, | ||
578 | { .chan = 9, | ||
579 | .freq = 2452}, | ||
580 | { .chan = 10, | ||
581 | .freq = 2457}, | ||
582 | { .chan = 11, | ||
583 | .freq = 2462}, | ||
584 | { .chan = 12, | ||
585 | .freq = 2467}, | ||
586 | { .chan = 13, | ||
587 | .freq = 2472}, | ||
588 | { .chan = 14, | ||
589 | .freq = 2484}, | ||
590 | }; | ||
591 | |||
592 | struct adm8211_priv { | ||
593 | struct pci_dev *pdev; | ||
594 | spinlock_t lock; | ||
595 | struct adm8211_csr __iomem *map; | ||
596 | struct adm8211_desc *rx_ring; | ||
597 | struct adm8211_desc *tx_ring; | ||
598 | dma_addr_t rx_ring_dma; | ||
599 | dma_addr_t tx_ring_dma; | ||
600 | struct adm8211_rx_ring_info *rx_buffers; | ||
601 | struct adm8211_tx_ring_info *tx_buffers; | ||
602 | unsigned int rx_ring_size, tx_ring_size; | ||
603 | unsigned int cur_tx, dirty_tx, cur_rx; | ||
604 | |||
605 | struct ieee80211_low_level_stats stats; | ||
606 | struct ieee80211_hw_mode modes[1]; | ||
607 | struct ieee80211_channel channels[ARRAY_SIZE(adm8211_channels)]; | ||
608 | struct ieee80211_rate rates[ARRAY_SIZE(adm8211_rates)]; | ||
609 | int mode; | ||
610 | |||
611 | int channel; | ||
612 | u8 bssid[ETH_ALEN]; | ||
613 | u8 ssid[32]; | ||
614 | size_t ssid_len; | ||
615 | u8 *mac_addr; | ||
616 | |||
617 | u8 soft_rx_crc; | ||
618 | u8 retry_limit; | ||
619 | |||
620 | u8 ant_power; | ||
621 | u8 tx_power; | ||
622 | u8 lpf_cutoff; | ||
623 | u8 lnags_threshold; | ||
624 | struct adm8211_eeprom *eeprom; | ||
625 | size_t eeprom_len; | ||
626 | |||
627 | u8 revid; | ||
628 | |||
629 | u32 nar; | ||
630 | |||
631 | #define ADM8211_TYPE_INTERSIL 0x00 | ||
632 | #define ADM8211_TYPE_RFMD 0x01 | ||
633 | #define ADM8211_TYPE_MARVEL 0x02 | ||
634 | #define ADM8211_TYPE_AIROHA 0x03 | ||
635 | #define ADM8211_TYPE_ADMTEK 0x05 | ||
636 | unsigned int rf_type:3; | ||
637 | unsigned int bbp_type:3; | ||
638 | |||
639 | u8 specific_bbptype; | ||
640 | enum { | ||
641 | ADM8211_RFMD2948 = 0x0, | ||
642 | ADM8211_RFMD2958 = 0x1, | ||
643 | ADM8211_RFMD2958_RF3000_CONTROL_POWER = 0x2, | ||
644 | ADM8211_MAX2820 = 0x8, | ||
645 | ADM8211_AL2210L = 0xC, /* Airoha */ | ||
646 | } transceiver_type; | ||
647 | }; | ||
648 | |||
649 | static const struct ieee80211_chan_range cranges[] = { | ||
650 | {1, 11}, /* FCC */ | ||
651 | {1, 11}, /* IC */ | ||
652 | {1, 13}, /* ETSI */ | ||
653 | {10, 11}, /* SPAIN */ | ||
654 | {10, 13}, /* FRANCE */ | ||
655 | {14, 14}, /* MMK */ | ||
656 | {1, 14}, /* MMK2 */ | ||
657 | }; | ||
658 | |||
659 | #endif /* ADM8211_H */ | ||