28 files changed, 233 insertions, 172 deletions

diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index 2e8552dc5eda..c63f3d33914a 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -219,8 +219,11 @@ int tty_port_block_til_ready(struct tty_port *port,
 
         /* if non-blocking mode is set we can pass directly to open unless
            the port has just hung up or is in another error state */
-        if ((filp->f_flags & O_NONBLOCK) ||
-                        (tty->flags & (1 << TTY_IO_ERROR))) {
+        if (tty->flags & (1 << TTY_IO_ERROR)) {
+                port->flags |= ASYNC_NORMAL_ACTIVE;
+                return 0;
+        }
+        if (filp->f_flags & O_NONBLOCK) {
                 /* Indicate we are open */
                 if (tty->termios->c_cflag & CBAUD)
                         tty_port_raise_dtr_rts(port);
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index a9952b1236b0..84c51e177269 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -236,7 +236,7 @@ static inline void ecb_crypt(const u8 *in, u8 *out, u32 *key,
         /* Padlock in ECB mode fetches at least ecb_fetch_bytes of data.
          * We could avoid some copying here but it's probably not worth it.
          */
-        if (unlikely(((unsigned long)in & PAGE_SIZE) + ecb_fetch_bytes > PAGE_SIZE)) {
+        if (unlikely(((unsigned long)in & ~PAGE_MASK) + ecb_fetch_bytes > PAGE_SIZE)) {
                 ecb_crypt_copy(in, out, key, cword, count);
                 return;
         }
@@ -248,7 +248,7 @@ static inline u8 *cbc_crypt(const u8 *in, u8 *out, u32 *key,
                             u8 *iv, struct cword *cword, int count)
 {
         /* Padlock in CBC mode fetches at least cbc_fetch_bytes of data. */
-        if (unlikely(((unsigned long)in & PAGE_SIZE) + cbc_fetch_bytes > PAGE_SIZE))
+        if (unlikely(((unsigned long)in & ~PAGE_MASK) + cbc_fetch_bytes > PAGE_SIZE))
                 return cbc_crypt_copy(in, out, key, iv, cword, count);
 
         return rep_xcrypt_cbc(in, out, key, iv, cword, count);
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 1fca59077949..fbab6846ae64 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -650,7 +650,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
         return 0;
 
 out_irq:
-        free_irq(alg_data->irq, alg_data);
+        free_irq(alg_data->irq, i2c_pnx->adapter);
 out_clock:
         i2c_pnx->set_clock_stop(pdev);
 out_unmap:
@@ -669,7 +669,7 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev)
         struct i2c_adapter *adap = i2c_pnx->adapter;
         struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 
-        free_irq(alg_data->irq, alg_data);
+        free_irq(alg_data->irq, i2c_pnx->adapter);
         i2c_del_adapter(adap);
         i2c_pnx->set_clock_stop(pdev);
         iounmap((void *)alg_data->ioaddr);
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c
index aa96bd2d27ea..a0702f36a72f 100644
--- a/drivers/i2c/chips/tsl2550.c
+++ b/drivers/i2c/chips/tsl2550.c
@@ -257,6 +257,7 @@ static DEVICE_ATTR(operating_mode, S_IWUSR | S_IRUGO,
 
 static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
 {
+        struct tsl2550_data *data = i2c_get_clientdata(client);
         u8 ch0, ch1;
         int ret;
 
@@ -274,6 +275,8 @@ static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
         ret = tsl2550_calculate_lux(ch0, ch1);
         if (ret < 0)
                 return ret;
+        if (data->operating_mode == 1)
+                ret *= 5;
 
         return sprintf(buf, "%d\n", ret);
 }
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 8d80fceca6a4..296504355142 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -762,6 +762,7 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 {
         int res = 0;
         struct i2c_adapter *found;
+        struct i2c_client *client, *next;
 
         /* First make sure that this adapter was ever added */
         mutex_lock(&core_lock);
@@ -781,6 +782,16 @@ int i2c_del_adapter(struct i2c_adapter *adap)
         if (res)
                 return res;
 
+        /* Remove devices instantiated from sysfs */
+        list_for_each_entry_safe(client, next, &userspace_devices, detected) {
+                if (client->adapter == adap) {
+                        dev_dbg(&adap->dev, "Removing %s at 0x%x\n",
+                                client->name, client->addr);
+                        list_del(&client->detected);
+                        i2c_unregister_device(client);
+                }
+        }
+
         /* Detach any active clients. This can't fail, thus we do not
            checking the returned value. */
         res = device_for_each_child(&adap->dev, NULL, __unregister_client);
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index db39f4a52f53..2cb2736d65aa 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -158,6 +158,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
         struct i2c_msg msg[2];
         u8 msgbuf[2];
         struct i2c_client *client;
+        unsigned long timeout, read_time;
         int status, i;
 
         memset(msg, 0, sizeof(msg));
@@ -183,47 +184,60 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
         if (count > io_limit)
                 count = io_limit;
 
-        /* Smaller eeproms can work given some SMBus extension calls */
         if (at24->use_smbus) {
+                /* Smaller eeproms can work given some SMBus extension calls */
                 if (count > I2C_SMBUS_BLOCK_MAX)
                         count = I2C_SMBUS_BLOCK_MAX;
-                status = i2c_smbus_read_i2c_block_data(client, offset,
-                                count, buf);
-                dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
-                                count, offset, status);
-                return (status < 0) ? -EIO : status;
+        } else {
+                /*
+                 * When we have a better choice than SMBus calls, use a
+                 * combined I2C message. Write address; then read up to
+                 * io_limit data bytes. Note that read page rollover helps us
+                 * here (unlike writes). msgbuf is u8 and will cast to our
+                 * needs.
+                 */
+                i = 0;
+                if (at24->chip.flags & AT24_FLAG_ADDR16)
+                        msgbuf[i++] = offset >> 8;
+                msgbuf[i++] = offset;
+
+                msg[0].addr = client->addr;
+                msg[0].buf = msgbuf;
+                msg[0].len = i;
+
+                msg[1].addr = client->addr;
+                msg[1].flags = I2C_M_RD;
+                msg[1].buf = buf;
+                msg[1].len = count;
         }
 
         /*
-         * When we have a better choice than SMBus calls, use a combined
-         * I2C message. Write address; then read up to io_limit data bytes.
-         * Note that read page rollover helps us here (unlike writes).
-         * msgbuf is u8 and will cast to our needs.
+         * Reads fail if the previous write didn't complete yet. We may
+         * loop a few times until this one succeeds, waiting at least
+         * long enough for one entire page write to work.
          */
-        i = 0;
-        if (at24->chip.flags & AT24_FLAG_ADDR16)
-                msgbuf[i++] = offset >> 8;
-        msgbuf[i++] = offset;
-
-        msg[0].addr = client->addr;
-        msg[0].buf = msgbuf;
-        msg[0].len = i;
+        timeout = jiffies + msecs_to_jiffies(write_timeout);
+        do {
+                read_time = jiffies;
+                if (at24->use_smbus) {
+                        status = i2c_smbus_read_i2c_block_data(client, offset,
+                                        count, buf);
+                } else {
+                        status = i2c_transfer(client->adapter, msg, 2);
+                        if (status == 2)
+                                status = count;
+                }
+                dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n",
+                                count, offset, status, jiffies);
 
-        msg[1].addr = client->addr;
-        msg[1].flags = I2C_M_RD;
-        msg[1].buf = buf;
-        msg[1].len = count;
+                if (status == count)
+                        return count;
 
-        status = i2c_transfer(client->adapter, msg, 2);
-        dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
-                        count, offset, status);
+                /* REVISIT: at HZ=100, this is sloooow */
+                msleep(1);
+        } while (time_before(read_time, timeout));
 
-        if (status == 2)
-                return count;
-        else if (status >= 0)
-                return -EIO;
-        else
-                return status;
+        return -ETIMEDOUT;
 }
 
 static ssize_t at24_read(struct at24_data *at24,
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index fb9bcfa6d947..b7e196e3c8d3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -1277,8 +1277,16 @@ int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid)
                 return -ENXIO;
         }
 
+        if (priv->stations[sta_id].tid[tid].agg.state ==
+                                IWL_EMPTYING_HW_QUEUE_ADDBA) {
+                IWL_DEBUG_HT(priv, "AGG stop before setup done\n");
+                ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, ra, tid);
+                priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF;
+                return 0;
+        }
+
         if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_ON)
-                IWL_WARN(priv, "Stopping AGG while state not IWL_AGG_ON\n");
+                IWL_WARN(priv, "Stopping AGG while state not ON or starting\n");
 
         tid_data = &priv->stations[sta_id].tid[tid];
         ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4;
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 5fd2da494d08..c968cc31cd86 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -164,8 +164,8 @@ void scsi_remove_host(struct Scsi_Host *shost)
                         return;
                 }
         spin_unlock_irqrestore(shost->host_lock, flags);
-        mutex_unlock(&shost->scan_mutex);
         scsi_forget_host(shost);
+        mutex_unlock(&shost->scan_mutex);
         scsi_proc_host_rm(shost);
 
         spin_lock_irqsave(shost->host_lock, flags);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 0547a7f44d42..47291bcff0d5 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -952,16 +952,6 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
         return SCSI_SCAN_LUN_PRESENT;
 }
 
-static inline void scsi_destroy_sdev(struct scsi_device *sdev)
-{
-        scsi_device_set_state(sdev, SDEV_DEL);
-        if (sdev->host->hostt->slave_destroy)
-                sdev->host->hostt->slave_destroy(sdev);
-        transport_destroy_device(&sdev->sdev_gendev);
-        put_device(&sdev->sdev_dev);
-        put_device(&sdev->sdev_gendev);
-}
-
 #ifdef CONFIG_SCSI_LOGGING
 /** 
  * scsi_inq_str - print INQUIRY data from min to max index, strip trailing whitespace
@@ -1139,7 +1129,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
                         }
                 }
         } else
-                scsi_destroy_sdev(sdev);
+                __scsi_remove_device(sdev);
  out:
         return res;
 }
@@ -1500,7 +1490,7 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
                 /*
                  * the sdev we used didn't appear in the report luns scan
                  */
-                scsi_destroy_sdev(sdev);
+                __scsi_remove_device(sdev);
         return ret;
 }
 
@@ -1710,7 +1700,7 @@ static void scsi_sysfs_add_devices(struct Scsi_Host *shost)
         shost_for_each_device(sdev, shost) {
                 if (!scsi_host_scan_allowed(shost) ||
                     scsi_sysfs_add_sdev(sdev) != 0)
-                        scsi_destroy_sdev(sdev);
+                        __scsi_remove_device(sdev);
         }
 }
 
@@ -1943,7 +1933,7 @@ void scsi_free_host_dev(struct scsi_device *sdev)
 {
         BUG_ON(sdev->id != sdev->host->this_id);
 
-        scsi_destroy_sdev(sdev);
+        __scsi_remove_device(sdev);
 }
 EXPORT_SYMBOL(scsi_free_host_dev);
 
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 5c7eb63a19d1..392d8db33905 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -854,82 +854,73 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
         transport_configure_device(&starget->dev);
         error = device_add(&sdev->sdev_gendev);
         if (error) {
-                put_device(sdev->sdev_gendev.parent);
                 printk(KERN_INFO "error 1\n");
-                return error;
+                goto out_remove;
         }
         error = device_add(&sdev->sdev_dev);
         if (error) {
                 printk(KERN_INFO "error 2\n");
-                goto clean_device;
+                device_del(&sdev->sdev_gendev);
+                goto out_remove;
         }
+        transport_add_device(&sdev->sdev_gendev);
+        sdev->is_visible = 1;
 
         /* create queue files, which may be writable, depending on the host */
         if (sdev->host->hostt->change_queue_depth)
                 error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_depth_rw);
         else
                 error = device_create_file(&sdev->sdev_gendev, &dev_attr_queue_depth);
-        if (error) {
-                __scsi_remove_device(sdev);
-                goto out;
-        }
+        if (error)
+                goto out_remove;
+
         if (sdev->host->hostt->change_queue_type)
                 error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_type_rw);
         else
                 error = device_create_file(&sdev->sdev_gendev, &dev_attr_queue_type);
-        if (error) {
-                __scsi_remove_device(sdev);
-                goto out;
-        }
+        if (error)
+                goto out_remove;
 
         error = bsg_register_queue(rq, &sdev->sdev_gendev, NULL, NULL);
 
         if (error)
+                /* we're treating error on bsg register as non-fatal,
+                 * so pretend nothing went wrong */
                 sdev_printk(KERN_INFO, sdev,
                             "Failed to register bsg queue, errno=%d\n", error);
 
-        /* we're treating error on bsg register as non-fatal, so pretend
-         * nothing went wrong */
-        error = 0;
-
         /* add additional host specific attributes */
         if (sdev->host->hostt->sdev_attrs) {
                 for (i = 0; sdev->host->hostt->sdev_attrs[i]; i++) {
                         error = device_create_file(&sdev->sdev_gendev,
                                         sdev->host->hostt->sdev_attrs[i]);
-                        if (error) {
-                                __scsi_remove_device(sdev);
-                                goto out;
-                        }
+                        if (error)
+                                goto out_remove;
                 }
         }
 
-        transport_add_device(&sdev->sdev_gendev);
- out:
-        return error;
-
- clean_device:
-        scsi_device_set_state(sdev, SDEV_CANCEL);
-
-        device_del(&sdev->sdev_gendev);
-        transport_destroy_device(&sdev->sdev_gendev);
-        put_device(&sdev->sdev_dev);
-        put_device(&sdev->sdev_gendev);
+        return 0;
 
+ out_remove:
+        __scsi_remove_device(sdev);
         return error;
+
 }
 
 void __scsi_remove_device(struct scsi_device *sdev)
 {
         struct device *dev = &sdev->sdev_gendev;
 
-        if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
-                return;
+        if (sdev->is_visible) {
+                if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
+                        return;
 
-        bsg_unregister_queue(sdev->request_queue);
-        device_unregister(&sdev->sdev_dev);
-        transport_remove_device(dev);
-        device_del(dev);
+                bsg_unregister_queue(sdev->request_queue);
+                device_unregister(&sdev->sdev_dev);
+                transport_remove_device(dev);
+                device_del(dev);
+        } else
+                put_device(&sdev->sdev_dev);
         scsi_device_set_state(sdev, SDEV_DEL);
         if (sdev->host->hostt->slave_destroy)
                 sdev->host->hostt->slave_destroy(sdev);
diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c
index 88da97745710..84be62149c6c 100644
--- a/drivers/scsi/sd_dif.c
+++ b/drivers/scsi/sd_dif.c
@@ -418,7 +418,7 @@ error:
                   __func__, virt, phys, be32_to_cpu(sdt->ref_tag),
                   be16_to_cpu(sdt->app_tag));
 
-        return -EIO;
+        return -EILSEQ;
 }
 
 /*
diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c
index beddaa6e9069..37ad0c449937 100644
--- a/drivers/serial/bcm63xx_uart.c
+++ b/drivers/serial/bcm63xx_uart.c
@@ -242,7 +242,7 @@ static void bcm_uart_do_rx(struct uart_port *port)
          * higher than fifo size anyway since we're much faster than
          * serial port */
         max_count = 32;
-        tty = port->info->port.tty;
+        tty = port->state->port.tty;
         do {
                 unsigned int iestat, c, cstat;
                 char flag;
@@ -318,7 +318,7 @@ static void bcm_uart_do_tx(struct uart_port *port)
                 return;
         }
 
-        xmit = &port->info->xmit;
+        xmit = &port->state->xmit;
         if (uart_circ_empty(xmit))
                 goto txq_empty;
 
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 02406ba6da1c..cdf172eda2e3 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -161,6 +161,7 @@ static int of_platform_serial_remove(struct of_device *ofdev)
 static struct of_device_id __devinitdata of_platform_serial_table[] = {
         { .type = "serial", .compatible = "ns8250",   .data = (void *)PORT_8250, },
         { .type = "serial", .compatible = "ns16450",  .data = (void *)PORT_16450, },
+        { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, },
         { .type = "serial", .compatible = "ns16550",  .data = (void *)PORT_16550, },
         { .type = "serial", .compatible = "ns16750",  .data = (void *)PORT_16750, },
         { .type = "serial", .compatible = "ns16850",  .data = (void *)PORT_16850, },
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 5ce839137ad6..0f857e645058 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -444,7 +444,7 @@ resubmit:
 static inline int
 hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
 {
-        return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+        return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
                                HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo,
                                tt, NULL, 0, 1000);
 }
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index d5b65962dd36..731150d4b1d9 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -1213,7 +1213,12 @@ udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp)
                                 tmp &= AMD_UNMASK_BIT(ep->num);
                                 writel(tmp, &dev->regs->ep_irqmsk);
                         }
-                }
+                } else if (ep->in) {
+                                /* enable ep irq */
+                                tmp = readl(&dev->regs->ep_irqmsk);
+                                tmp &= AMD_UNMASK_BIT(ep->num);
+                                writel(tmp, &dev->regs->ep_irqmsk);
+                        }
 
         } else if (ep->dma) {
 
@@ -2005,18 +2010,17 @@ __acquires(dev->lock)
 {
         int tmp;
 
-        /* empty queues and init hardware */
-        udc_basic_init(dev);
-        for (tmp = 0; tmp < UDC_EP_NUM; tmp++) {
-                empty_req_queue(&dev->ep[tmp]);
-        }
-
         if (dev->gadget.speed != USB_SPEED_UNKNOWN) {
                 spin_unlock(&dev->lock);
                 driver->disconnect(&dev->gadget);
                 spin_lock(&dev->lock);
         }
-        /* init */
+
+        /* empty queues and init hardware */
+        udc_basic_init(dev);
+        for (tmp = 0; tmp < UDC_EP_NUM; tmp++)
+                empty_req_queue(&dev->ep[tmp]);
+
         udc_setup_endpoints(dev);
 }
 
@@ -2472,6 +2476,13 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
                                 }
                         }
 
+                } else if (!use_dma && ep->in) {
+                        /* disable interrupt */
+                        tmp = readl(
+                                &dev->regs->ep_irqmsk);
+                        tmp |= AMD_BIT(ep->num);
+                        writel(tmp,
+                                &dev->regs->ep_irqmsk);
                 }
         }
         /* clear status bits */
@@ -3279,6 +3290,17 @@ static int udc_pci_probe(
                 goto finished;
         }
 
+        spin_lock_init(&dev->lock);
+        /* udc csr registers base */
+        dev->csr = dev->virt_addr + UDC_CSR_ADDR;
+        /* dev registers base */
+        dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR;
+        /* ep registers base */
+        dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR;
+        /* fifo's base */
+        dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR);
+        dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
+
         if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
                 dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq);
                 kfree(dev);
@@ -3331,7 +3353,6 @@ static int udc_probe(struct udc *dev)
         udc_pollstall_timer.data = 0;
 
         /* device struct setup */
-        spin_lock_init(&dev->lock);
         dev->gadget.ops = &udc_ops;
 
         dev_set_name(&dev->gadget.dev, "gadget");
@@ -3340,16 +3361,6 @@ static int udc_probe(struct udc *dev)
         dev->gadget.name = name;
         dev->gadget.is_dualspeed = 1;
 
-        /* udc csr registers base */
-        dev->csr = dev->virt_addr + UDC_CSR_ADDR;
-        /* dev registers base */
-        dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR;
-        /* ep registers base */
-        dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR;
-        /* fifo's base */
-        dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR);
-        dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
-
         /* init registers, interrupts, ... */
         startup_registers(dev);
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 9835e0713943..f5f5601701c9 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -28,6 +28,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/timer.h>
+#include <linux/ktime.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
@@ -676,6 +677,7 @@ static int ehci_run (struct usb_hcd *hcd)
         ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
         msleep(5);
         up_write(&ehci_cf_port_reset_rwsem);
+        ehci->last_periodic_enable = ktime_get_real();
 
         temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
         ehci_info (ehci,
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 378861b9d79a..ead5f4f2aa5a 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -111,6 +111,10 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
         switch (pdev->vendor) {
         case PCI_VENDOR_ID_INTEL:
                 ehci->need_io_watchdog = 0;
+                if (pdev->device == 0x27cc) {
+                        ehci->broken_periodic = 1;
+                        ehci_info(ehci, "using broken periodic workaround\n");
+                }
                 break;
         case PCI_VENDOR_ID_TDI:
                 if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 00ad9ce392ed..139a2cc3f641 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -487,8 +487,20 @@ halt:
                          * we must clear the TT buffer (11.17.5).
                          */
                         if (unlikely(last_status != -EINPROGRESS &&
-                                        last_status != -EREMOTEIO))
-                                ehci_clear_tt_buffer(ehci, qh, urb, token);
+                                        last_status != -EREMOTEIO)) {
+                                /* The TT's in some hubs malfunction when they
+                                 * receive this request following a STALL (they
+                                 * stop sending isochronous packets).  Since a
+                                 * STALL can't leave the TT buffer in a busy
+                                 * state (if you believe Figures 11-48 - 11-51
+                                 * in the USB 2.0 spec), we won't clear the TT
+                                 * buffer in this case.  Strictly speaking this
+                                 * is a violation of the spec.
+                                 */
+                                if (last_status != -EPIPE)
+                                        ehci_clear_tt_buffer(ehci, qh, urb,
+                                                        token);
+                        }
                 }
 
                 /* if we're removing something not at the queue head,
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index b25cdea93a1f..a5535b5e3fe2 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -475,6 +475,8 @@ static int enable_periodic (struct ehci_hcd *ehci)
         /* make sure ehci_work scans these */
         ehci->next_uframe = ehci_readl(ehci, &ehci->regs->frame_index)
                 % (ehci->periodic_size << 3);
+        if (unlikely(ehci->broken_periodic))
+                ehci->last_periodic_enable = ktime_get_real();
         return 0;
 }
 
@@ -486,6 +488,16 @@ static int disable_periodic (struct ehci_hcd *ehci)
         if (--ehci->periodic_sched)
                 return 0;
 
+        if (unlikely(ehci->broken_periodic)) {
+                /* delay experimentally determined */
+                ktime_t safe = ktime_add_us(ehci->last_periodic_enable, 1000);
+                ktime_t now = ktime_get_real();
+                s64 delay = ktime_us_delta(safe, now);
+
+                if (unlikely(delay > 0))
+                        udelay(delay);
+        }
+
         /* did setting PSE not take effect yet?
          * takes effect only at frame boundaries...
          */
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 064e76821ff5..2d85e21ff282 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -118,6 +118,7 @@ struct ehci_hcd {			/* one per controller */
         unsigned                stamp;
         unsigned                random_frame;
         unsigned long           next_statechange;
+        ktime_t                 last_periodic_enable;
         u32                     command;
 
         /* SILICON QUIRKS */
@@ -127,6 +128,7 @@ struct ehci_hcd {			/* one per controller */
         unsigned                big_endian_desc:1;
         unsigned                has_amcc_usb23:1;
         unsigned                need_io_watchdog:1;
+        unsigned                broken_periodic:1;
 
         /* required for usb32 quirk */
         #define OHCI_CTRL_HCFS          (3 << 6)
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index c3577bbbae6c..ef2332a9941d 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -1442,11 +1442,6 @@ static int cppi_channel_abort(struct dma_channel *channel)
                 musb_writew(regs, MUSB_TXCSR, value);
                 musb_writew(regs, MUSB_TXCSR, value);
 
-                /* re-enable interrupt */
-                if (enabled)
-                        musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
-                                        (1 << cppi_ch->index));
-
                 /* While we scrub the TX state RAM, ensure that we clean
                  * up any interrupt that's currently asserted:
                  * 1. Write to completion Ptr value 0x1(bit 0 set)
@@ -1459,6 +1454,11 @@ static int cppi_channel_abort(struct dma_channel *channel)
                 cppi_reset_tx(tx_ram, 1);
                 musb_writel(&tx_ram->tx_complete, 0, 0);
 
+                /* re-enable interrupt */
+                if (enabled)
+                        musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
+                                        (1 << cppi_ch->index));
+
                 cppi_dump_tx(5, cppi_ch, " (done teardown)");
 
                 /* REVISIT tx side _should_ clean up the same way
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 3a61ddb62bd2..547e0e390726 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1450,7 +1450,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 #endif
 
                 if (hw_ep->max_packet_sz_tx) {
-                        printk(KERN_DEBUG
+                        DBG(1,
                                 "%s: hw_ep %d%s, %smax %d\n",
                                 musb_driver_name, i,
                                 hw_ep->is_shared_fifo ? "shared" : "tx",
@@ -1459,7 +1459,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
                                 hw_ep->max_packet_sz_tx);
                 }
                 if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
-                        printk(KERN_DEBUG
+                        DBG(1,
                                 "%s: hw_ep %d%s, %smax %d\n",
                                 musb_driver_name, i,
                                 "rx",
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 8b3c4e2ed7b8..74073f9a43f0 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -4,6 +4,7 @@
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -436,14 +437,6 @@ void musb_g_tx(struct musb *musb, u8 epnum)
                         csr |= MUSB_TXCSR_P_WZC_BITS;
                         csr &= ~MUSB_TXCSR_P_SENTSTALL;
                         musb_writew(epio, MUSB_TXCSR, csr);
-                        if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
-                                dma->status = MUSB_DMA_STATUS_CORE_ABORT;
-                                musb->dma_controller->channel_abort(dma);
-                        }
-
-                        if (request)
-                                musb_g_giveback(musb_ep, request, -EPIPE);
-
                         break;
                 }
 
@@ -582,15 +575,25 @@ void musb_g_tx(struct musb *musb, u8 epnum)
  */
 static void rxstate(struct musb *musb, struct musb_request *req)
 {
-        u16                     csr = 0;
         const u8                epnum = req->epnum;
         struct usb_request      *request = &req->request;
         struct musb_ep          *musb_ep = &musb->endpoints[epnum].ep_out;
         void __iomem            *epio = musb->endpoints[epnum].regs;
         unsigned                fifo_count = 0;
         u16                     len = musb_ep->packet_sz;
+        u16                     csr = musb_readw(epio, MUSB_RXCSR);
 
-        csr = musb_readw(epio, MUSB_RXCSR);
+        /* We shouldn't get here while DMA is active, but we do... */
+        if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
+                DBG(4, "DMA pending...\n");
+                return;
+        }
+
+        if (csr & MUSB_RXCSR_P_SENDSTALL) {
+                DBG(5, "%s stalling, RXCSR %04x\n",
+                    musb_ep->end_point.name, csr);
+                return;
+        }
 
         if (is_cppi_enabled() && musb_ep->dma) {
                 struct dma_controller   *c = musb->dma_controller;
@@ -761,19 +764,10 @@ void musb_g_rx(struct musb *musb, u8 epnum)
                         csr, dma ? " (dma)" : "", request);
 
         if (csr & MUSB_RXCSR_P_SENTSTALL) {
-                if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
-                        dma->status = MUSB_DMA_STATUS_CORE_ABORT;
-                        (void) musb->dma_controller->channel_abort(dma);
-                        request->actual += musb_ep->dma->actual_len;
-                }
-
                 csr |= MUSB_RXCSR_P_WZC_BITS;
                 csr &= ~MUSB_RXCSR_P_SENTSTALL;
                 musb_writew(epio, MUSB_RXCSR, csr);
-
-                if (request)
-                        musb_g_giveback(musb_ep, request, -EPIPE);
-                goto done;
+                return;
         }
 
         if (csr & MUSB_RXCSR_P_OVERRUN) {
@@ -795,7 +789,7 @@ void musb_g_rx(struct musb *musb, u8 epnum)
                 DBG((csr & MUSB_RXCSR_DMAENAB) ? 4 : 1,
                         "%s busy, csr %04x\n",
                         musb_ep->end_point.name, csr);
-                goto done;
+                return;
         }
 
         if (dma && (csr & MUSB_RXCSR_DMAENAB)) {
@@ -826,22 +820,15 @@ void musb_g_rx(struct musb *musb, u8 epnum)
                 if ((request->actual < request->length)
                                 && (musb_ep->dma->actual_len
                                         == musb_ep->packet_sz))
-                        goto done;
+                        return;
 #endif
                 musb_g_giveback(musb_ep, request, 0);
 
                 request = next_request(musb_ep);
                 if (!request)
-                        goto done;
-
-                /* don't start more i/o till the stall clears */
-                musb_ep_select(mbase, epnum);
-                csr = musb_readw(epio, MUSB_RXCSR);
-                if (csr & MUSB_RXCSR_P_SENDSTALL)
-                        goto done;
+                        return;
         }
 
-
         /* analyze request if the ep is hot */
         if (request)
                 rxstate(musb, to_musb_request(request));
@@ -849,8 +836,6 @@ void musb_g_rx(struct musb *musb, u8 epnum)
                 DBG(3, "packet waiting for %s%s request\n",
                                 musb_ep->desc ? "" : "inactive ",
                                 musb_ep->end_point.name);
-
-done:
         return;
 }
 
@@ -1244,7 +1229,7 @@ int musb_gadget_set_halt(struct usb_ep *ep, int value)
         void __iomem            *mbase;
         unsigned long           flags;
         u16                     csr;
-        struct musb_request     *request = NULL;
+        struct musb_request     *request;
         int                     status = 0;
 
         if (!ep)
@@ -1260,24 +1245,29 @@ int musb_gadget_set_halt(struct usb_ep *ep, int value)
 
         musb_ep_select(mbase, epnum);
 
-        /* cannot portably stall with non-empty FIFO */
         request = to_musb_request(next_request(musb_ep));
-        if (value && musb_ep->is_in) {
-                csr = musb_readw(epio, MUSB_TXCSR);
-                if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
-                        DBG(3, "%s fifo busy, cannot halt\n", ep->name);
-                        spin_unlock_irqrestore(&musb->lock, flags);
-                        return -EAGAIN;
+        if (value) {
+                if (request) {
+                        DBG(3, "request in progress, cannot halt %s\n",
+                            ep->name);
+                        status = -EAGAIN;
+                        goto done;
+                }
+                /* Cannot portably stall with non-empty FIFO */
+                if (musb_ep->is_in) {
+                        csr = musb_readw(epio, MUSB_TXCSR);
+                        if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+                                DBG(3, "FIFO busy, cannot halt %s\n", ep->name);
+                                status = -EAGAIN;
+                                goto done;
+                        }
                 }
-
         }
 
         /* set/clear the stall and toggle bits */
         DBG(2, "%s: %s stall\n", ep->name, value ? "set" : "clear");
         if (musb_ep->is_in) {
                 csr = musb_readw(epio, MUSB_TXCSR);
-                if (csr & MUSB_TXCSR_FIFONOTEMPTY)
-                        csr |= MUSB_TXCSR_FLUSHFIFO;
                 csr |= MUSB_TXCSR_P_WZC_BITS
                         | MUSB_TXCSR_CLRDATATOG;
                 if (value)
@@ -1300,14 +1290,13 @@ int musb_gadget_set_halt(struct usb_ep *ep, int value)
                 musb_writew(epio, MUSB_RXCSR, csr);
         }
 
-done:
-
         /* maybe start the first request in the queue */
         if (!musb_ep->busy && !value && request) {
                 DBG(3, "restarting the request\n");
                 musb_ep_restart(musb, request);
         }
 
+done:
         spin_unlock_irqrestore(&musb->lock, flags);
         return status;
 }
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 7a6778675ad3..522efb31b56b 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -511,7 +511,8 @@ static void ep0_txstate(struct musb *musb)
 
         /* update the flags */
         if (fifo_count < MUSB_MAX_END0_PACKET
-                        || request->actual == request->length) {
+                        || (request->actual == request->length
+                                && !request->zero)) {
                 musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
                 csr |= MUSB_CSR0_P_DATAEND;
         } else
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index cf94511485f2..e3ab40a966eb 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1301,8 +1301,11 @@ void musb_host_tx(struct musb *musb, u8 epnum)
                 return;
         } else  if (usb_pipeisoc(pipe) && dma) {
                 if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb,
-                                offset, length))
+                                offset, length)) {
+                        if (is_cppi_enabled() || tusb_dma_omap())
+                                musb_h_tx_dma_start(hw_ep);
                         return;
+                }
         } else  if (tx_csr & MUSB_TXCSR_DMAENAB) {
                 DBG(1, "not complete, but DMA enabled?\n");
                 return;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 9c60d6d4908a..ebcc6d0e2e91 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1937,7 +1937,7 @@ static void ftdi_write_bulk_callback(struct urb *urb)
                 return;
         }
         /* account for transferred data */
-        countback = urb->actual_length;
+        countback = urb->transfer_buffer_length;
         data_offset = priv->write_offset;
         if (data_offset > 0) {
                 /* Subtract the control bytes */
@@ -1950,7 +1950,6 @@ static void ftdi_write_bulk_callback(struct urb *urb)
 
         if (status) {
                 dbg("nonzero write bulk status received: %d", status);
-                return;
         }
 
         usb_serial_port_softint(port);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 319aaf9725b3..0577e4b61114 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -336,6 +336,10 @@ static int  option_resume(struct usb_serial *serial);
 #define AIRPLUS_VENDOR_ID                       0x1011
 #define AIRPLUS_PRODUCT_MCD650                  0x3198
 
+/* 4G Systems products */
+#define FOUR_G_SYSTEMS_VENDOR_ID                0x1c9e
+#define FOUR_G_SYSTEMS_PRODUCT_W14              0x9603
+
 static struct usb_device_id option_ids[] = {
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -599,6 +603,7 @@ static struct usb_device_id option_ids[] = {
         { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
         { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
         { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
+        { USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) },
         { } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index f24d04132eda..4d227b152001 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -317,7 +317,7 @@ static int __devexit pnx4008_wdt_remove(struct platform_device *pdev)
 
 static struct platform_driver platform_wdt_driver = {
         .driver = {
-                .name = "watchdog",
+                .name = "pnx4008-watchdog",
                 .owner  = THIS_MODULE,
         },
         .probe = pnx4008_wdt_probe,
@@ -352,4 +352,4 @@ MODULE_PARM_DESC(nowayout,
 
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-MODULE_ALIAS("platform:watchdog");
+MODULE_ALIAS("platform:pnx4008-watchdog");