1 files changed, 6 insertions, 120 deletions

diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
index e3b8f757d2d3..0e9d8c479c35 100644
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -40,13 +40,12 @@
 #include "sp5100_tco.h"
 
 /* Module and version information */
-#define TCO_VERSION "0.03"
+#define TCO_VERSION "0.05"
 #define TCO_MODULE_NAME "SP5100 TCO timer"
 #define TCO_DRIVER_NAME   TCO_MODULE_NAME ", v" TCO_VERSION
 
 /* internal variables */
 static u32 tcobase_phys;
-static u32 resbase_phys;
 static u32 tco_wdt_fired;
 static void __iomem *tcobase;
 static unsigned int pm_iobase;
@@ -54,10 +53,6 @@ static DEFINE_SPINLOCK(tco_lock);	/* Guards the hardware */
 static unsigned long timer_alive;
 static char tco_expect_close;
 static struct pci_dev *sp5100_tco_pci;
-static struct resource wdt_res = {
-        .name = "Watchdog Timer",
-        .flags = IORESOURCE_MEM,
-};
 
 /* the watchdog platform device */
 static struct platform_device *sp5100_tco_platform_device;
@@ -75,12 +70,6 @@ module_param(nowayout, bool, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started."
                 " (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
-static unsigned int force_addr;
-module_param(force_addr, uint, 0);
-MODULE_PARM_DESC(force_addr, "Force the use of specified MMIO address."
-                " ONLY USE THIS PARAMETER IF YOU REALLY KNOW"
-                " WHAT YOU ARE DOING (default=none)");
-
 /*
  * Some TCO specific functions
  */
@@ -176,39 +165,6 @@ static void tco_timer_enable(void)
         }
 }
 
-static void tco_timer_disable(void)
-{
-        int val;
-
-        if (sp5100_tco_pci->revision >= 0x40) {
-                /* For SB800 or later */
-                /* Enable watchdog decode bit and Disable watchdog timer */
-                outb(SB800_PM_WATCHDOG_CONTROL, SB800_IO_PM_INDEX_REG);
-                val = inb(SB800_IO_PM_DATA_REG);
-                val |= SB800_PCI_WATCHDOG_DECODE_EN;
-                val |= SB800_PM_WATCHDOG_DISABLE;
-                outb(val, SB800_IO_PM_DATA_REG);
-        } else {
-                /* For SP5100 or SB7x0 */
-                /* Enable watchdog decode bit */
-                pci_read_config_dword(sp5100_tco_pci,
-                                      SP5100_PCI_WATCHDOG_MISC_REG,
-                                      &val);
-
-                val |= SP5100_PCI_WATCHDOG_DECODE_EN;
-
-                pci_write_config_dword(sp5100_tco_pci,
-                                       SP5100_PCI_WATCHDOG_MISC_REG,
-                                       val);
-
-                /* Disable Watchdog timer */
-                outb(SP5100_PM_WATCHDOG_CONTROL, SP5100_IO_PM_INDEX_REG);
-                val = inb(SP5100_IO_PM_DATA_REG);
-                val |= SP5100_PM_WATCHDOG_DISABLE;
-                outb(val, SP5100_IO_PM_DATA_REG);
-        }
-}
-
 /*
  *      /dev/watchdog handling
  */
@@ -361,7 +317,7 @@ static unsigned char sp5100_tco_setupdevice(void)
 {
         struct pci_dev *dev = NULL;
         const char *dev_name = NULL;
-        u32 val, tmp_val;
+        u32 val;
         u32 index_reg, data_reg, base_addr;
 
         /* Match the PCI device */
@@ -459,63 +415,8 @@ static unsigned char sp5100_tco_setupdevice(void)
         } else
                 pr_debug("SBResource_MMIO is disabled(0x%04x)\n", val);
 
-        /*
-         * Lastly re-programming the watchdog timer MMIO address,
-         * This method is a last resort...
-         *
-         * Before re-programming, to ensure that the watchdog timer
-         * is disabled, disable the watchdog timer.
-         */
-        tco_timer_disable();
-
-        if (force_addr) {
-                /*
-                 * Force the use of watchdog timer MMIO address, and aligned to
-                 * 8byte boundary.
-                 */
-                force_addr &= ~0x7;
-                val = force_addr;
-
-                pr_info("Force the use of 0x%04x as MMIO address\n", val);
-        } else {
-                /*
-                 * Get empty slot into the resource tree for watchdog timer.
-                 */
-                if (allocate_resource(&iomem_resource,
-                                      &wdt_res,
-                                      SP5100_WDT_MEM_MAP_SIZE,
-                                      0xf0000000,
-                                      0xfffffff8,
-                                      0x8,
-                                      NULL,
-                                      NULL)) {
-                        pr_err("MMIO allocation failed\n");
-                        goto unreg_region;
-                }
-
-                val = resbase_phys = wdt_res.start;
-                pr_debug("Got 0x%04x from resource tree\n", val);
-        }
-
-        /* Restore to the low three bits */
-        outb(base_addr+0, index_reg);
-        tmp_val = val | (inb(data_reg) & 0x7);
-
-        /* Re-programming the watchdog timer base address */
-        outb(base_addr+0, index_reg);
-        outb((tmp_val >>  0) & 0xff, data_reg);
-        outb(base_addr+1, index_reg);
-        outb((tmp_val >>  8) & 0xff, data_reg);
-        outb(base_addr+2, index_reg);
-        outb((tmp_val >> 16) & 0xff, data_reg);
-        outb(base_addr+3, index_reg);
-        outb((tmp_val >> 24) & 0xff, data_reg);
-
-        if (!request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
-                                                                   dev_name)) {
-                pr_err("MMIO address 0x%04x already in use\n", val);
-                goto unreg_resource;
-        }
+        pr_notice("failed to find MMIO address, giving up.\n");
+        goto  unreg_region;
 
 setup_wdt:
         tcobase_phys = val;
@@ -555,9 +456,6 @@ setup_wdt:
 
 unreg_mem_region:
         release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
-unreg_resource:
-        if (resbase_phys)
-                release_resource(&wdt_res);
 unreg_region:
         release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
 exit:
@@ -567,7 +465,6 @@ exit:
 static int sp5100_tco_init(struct platform_device *dev)
 {
         int ret;
-        char addr_str[16];
 
         /*
          * Check whether or not the hardware watchdog is there. If found, then
@@ -599,23 +496,14 @@ static int sp5100_tco_init(struct platform_device *dev)
         clear_bit(0, &timer_alive);
 
         /* Show module parameters */
-        if (force_addr == tcobase_phys)
-                /* The force_addr is vaild */
-                sprintf(addr_str, "0x%04x", force_addr);
-        else
-                strcpy(addr_str, "none");
-
-        pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d, "
-                "force_addr=%s)\n",
-                tcobase, heartbeat, nowayout, addr_str);
+        pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
+                tcobase, heartbeat, nowayout);
 
         return 0;
 
 exit:
         iounmap(tcobase);
         release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
-        if (resbase_phys)
-                release_resource(&wdt_res);
         release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
         return ret;
 }
@@ -630,8 +518,6 @@ static void sp5100_tco_cleanup(void)
         misc_deregister(&sp5100_tco_miscdev);
         iounmap(tcobase);
         release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
-        if (resbase_phys)
-                release_resource(&wdt_res);
         release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
 }