1 files changed, 12 insertions, 4 deletions

diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index 0f356939b349..29df1d2998b2 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -88,7 +88,7 @@
 #define COMM_DT                         0x2000
 #define COMM_SPU                        0x1000
 #define COMM_F                          0x0800
-#define COMM_NTP                        0x0400
+#define COMM_NTF                        0x0400
 #define COMM_ICP                        0x0200
 #define COMM_RST                        0x0100
 
@@ -440,7 +440,7 @@ static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
                         printk("\n");
                 }
 #endif
-        } while(!(buf[0x08] & 0x20) && !(err < 0) && ++count < 100);
+        } while (!(buf[0x08] & ST_IDLE) && !(err < 0) && ++count < 100);
 
         if (err >= 16 && st->status & ST_EPOF) {
                 printk(KERN_INFO "Resetting device after ST_EPOF.\n");
@@ -470,8 +470,16 @@ static int ds_reset(struct ds_device *dev)
 {
         int err;
 
-        //err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_F | COMM_IM | COMM_SE, SPEED_FLEXIBLE);
-        err = ds_send_control(dev, 0x43, SPEED_NORMAL);
+        /* Other potentionally interesting flags for reset.
+         *
+         * COMM_NTF: Return result register feedback.  This could be used to
+         * detect some conditions such as short, alarming presence, or
+         * detect if a new device was detected.
+         *
+         * COMM_SE which allows SPEED_NORMAL, SPEED_FLEXIBLE, SPEED_OVERDRIVE:
+         * Select the data transfer rate.
+         */
+        err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_IM, SPEED_NORMAL);
         if (err)
                 return err;