3 files changed, 5 insertions, 5 deletions

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index b3bf4ecc983a..fb9d8d0b2c04 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -661,7 +661,7 @@ config FB_HECUBA
        help
          This enables support for the Hecuba board. This driver was tested
          with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
-         interface (8 bit data, 4 bit control). If you anticpate using
+         interface (8 bit data, 4 bit control). If you anticipate using
          this driver, say Y or M; otherwise say N. You must specify the
          GPIO IO address to be used for setting control and data.
 
@@ -815,7 +815,7 @@ config FB_XVR500
         help
           This is the framebuffer device for the Sun XVR-500 and similar
           graphics cards based upon the 3DLABS Wildcat chipset.  The driver
-          only works on sparc64 systems where the system firwmare has
+          only works on sparc64 systems where the system firmware has
           mostly initialized the card already.  It is treated as a
           completely dumb framebuffer device.
 
@@ -828,7 +828,7 @@ config FB_XVR2500
         help
           This is the framebuffer device for the Sun XVR-2500 and similar
           graphics cards based upon the 3DLABS Wildcat chipset.  The driver
-          only works on sparc64 systems where the system firwmare has
+          only works on sparc64 systems where the system firmware has
           mostly initialized the card already.  It is treated as a
           completely dumb framebuffer device.
 
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index a22ccf9485a4..267422f66255 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -27,7 +27,7 @@ config VGACON_SOFT_SCROLLBACK
          The scrollback buffer of the standard VGA console is located in
          the VGA RAM.  The size of this RAM is fixed and is quite small.
          If you require a larger scrollback buffer, this can be placed in
-         System RAM which is dynamically allocated during intialization.
+         System RAM which is dynamically allocated during initialization.
          Placing the scrollback buffer in System RAM will slightly slow
          down the console.
 
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index 7f4d25b8a184..f4fcf11b290d 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -8,7 +8,7 @@ config FB_OMAP
           Frame buffer driver for OMAP based boards.
 
 config FB_OMAP_BOOTLOADER_INIT
-        bool "Check bootloader initializaion"
+        bool "Check bootloader initialization"
         depends on FB_OMAP
         help
           Say Y here if you want to enable checking if the bootloader has