diff options
Diffstat (limited to 'drivers/video/backlight/hx8357.c')
-rw-r--r-- | drivers/video/backlight/hx8357.c | 497 |
1 files changed, 497 insertions, 0 deletions
diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c new file mode 100644 index 000000000000..a0482b567bfe --- /dev/null +++ b/drivers/video/backlight/hx8357.c | |||
@@ -0,0 +1,497 @@ | |||
1 | /* | ||
2 | * Driver for the Himax HX-8357 LCD Controller | ||
3 | * | ||
4 | * Copyright 2012 Free Electrons | ||
5 | * | ||
6 | * Licensed under the GPLv2 or later. | ||
7 | */ | ||
8 | |||
9 | #include <linux/delay.h> | ||
10 | #include <linux/lcd.h> | ||
11 | #include <linux/module.h> | ||
12 | #include <linux/of.h> | ||
13 | #include <linux/of_device.h> | ||
14 | #include <linux/of_gpio.h> | ||
15 | #include <linux/spi/spi.h> | ||
16 | |||
17 | #define HX8357_NUM_IM_PINS 3 | ||
18 | |||
19 | #define HX8357_SWRESET 0x01 | ||
20 | #define HX8357_GET_RED_CHANNEL 0x06 | ||
21 | #define HX8357_GET_GREEN_CHANNEL 0x07 | ||
22 | #define HX8357_GET_BLUE_CHANNEL 0x08 | ||
23 | #define HX8357_GET_POWER_MODE 0x0a | ||
24 | #define HX8357_GET_MADCTL 0x0b | ||
25 | #define HX8357_GET_PIXEL_FORMAT 0x0c | ||
26 | #define HX8357_GET_DISPLAY_MODE 0x0d | ||
27 | #define HX8357_GET_SIGNAL_MODE 0x0e | ||
28 | #define HX8357_GET_DIAGNOSTIC_RESULT 0x0f | ||
29 | #define HX8357_ENTER_SLEEP_MODE 0x10 | ||
30 | #define HX8357_EXIT_SLEEP_MODE 0x11 | ||
31 | #define HX8357_ENTER_PARTIAL_MODE 0x12 | ||
32 | #define HX8357_ENTER_NORMAL_MODE 0x13 | ||
33 | #define HX8357_EXIT_INVERSION_MODE 0x20 | ||
34 | #define HX8357_ENTER_INVERSION_MODE 0x21 | ||
35 | #define HX8357_SET_DISPLAY_OFF 0x28 | ||
36 | #define HX8357_SET_DISPLAY_ON 0x29 | ||
37 | #define HX8357_SET_COLUMN_ADDRESS 0x2a | ||
38 | #define HX8357_SET_PAGE_ADDRESS 0x2b | ||
39 | #define HX8357_WRITE_MEMORY_START 0x2c | ||
40 | #define HX8357_READ_MEMORY_START 0x2e | ||
41 | #define HX8357_SET_PARTIAL_AREA 0x30 | ||
42 | #define HX8357_SET_SCROLL_AREA 0x33 | ||
43 | #define HX8357_SET_TEAR_OFF 0x34 | ||
44 | #define HX8357_SET_TEAR_ON 0x35 | ||
45 | #define HX8357_SET_ADDRESS_MODE 0x36 | ||
46 | #define HX8357_SET_SCROLL_START 0x37 | ||
47 | #define HX8357_EXIT_IDLE_MODE 0x38 | ||
48 | #define HX8357_ENTER_IDLE_MODE 0x39 | ||
49 | #define HX8357_SET_PIXEL_FORMAT 0x3a | ||
50 | #define HX8357_SET_PIXEL_FORMAT_DBI_3BIT (0x1) | ||
51 | #define HX8357_SET_PIXEL_FORMAT_DBI_16BIT (0x5) | ||
52 | #define HX8357_SET_PIXEL_FORMAT_DBI_18BIT (0x6) | ||
53 | #define HX8357_SET_PIXEL_FORMAT_DPI_3BIT (0x1 << 4) | ||
54 | #define HX8357_SET_PIXEL_FORMAT_DPI_16BIT (0x5 << 4) | ||
55 | #define HX8357_SET_PIXEL_FORMAT_DPI_18BIT (0x6 << 4) | ||
56 | #define HX8357_WRITE_MEMORY_CONTINUE 0x3c | ||
57 | #define HX8357_READ_MEMORY_CONTINUE 0x3e | ||
58 | #define HX8357_SET_TEAR_SCAN_LINES 0x44 | ||
59 | #define HX8357_GET_SCAN_LINES 0x45 | ||
60 | #define HX8357_READ_DDB_START 0xa1 | ||
61 | #define HX8357_SET_DISPLAY_MODE 0xb4 | ||
62 | #define HX8357_SET_DISPLAY_MODE_RGB_THROUGH (0x3) | ||
63 | #define HX8357_SET_DISPLAY_MODE_RGB_INTERFACE (1 << 4) | ||
64 | #define HX8357_SET_PANEL_DRIVING 0xc0 | ||
65 | #define HX8357_SET_DISPLAY_FRAME 0xc5 | ||
66 | #define HX8357_SET_RGB 0xc6 | ||
67 | #define HX8357_SET_RGB_ENABLE_HIGH (1 << 1) | ||
68 | #define HX8357_SET_GAMMA 0xc8 | ||
69 | #define HX8357_SET_POWER 0xd0 | ||
70 | #define HX8357_SET_VCOM 0xd1 | ||
71 | #define HX8357_SET_POWER_NORMAL 0xd2 | ||
72 | #define HX8357_SET_PANEL_RELATED 0xe9 | ||
73 | |||
74 | struct hx8357_data { | ||
75 | unsigned im_pins[HX8357_NUM_IM_PINS]; | ||
76 | unsigned reset; | ||
77 | struct spi_device *spi; | ||
78 | int state; | ||
79 | }; | ||
80 | |||
81 | static u8 hx8357_seq_power[] = { | ||
82 | HX8357_SET_POWER, 0x44, 0x41, 0x06, | ||
83 | }; | ||
84 | |||
85 | static u8 hx8357_seq_vcom[] = { | ||
86 | HX8357_SET_VCOM, 0x40, 0x10, | ||
87 | }; | ||
88 | |||
89 | static u8 hx8357_seq_power_normal[] = { | ||
90 | HX8357_SET_POWER_NORMAL, 0x05, 0x12, | ||
91 | }; | ||
92 | |||
93 | static u8 hx8357_seq_panel_driving[] = { | ||
94 | HX8357_SET_PANEL_DRIVING, 0x14, 0x3b, 0x00, 0x02, 0x11, | ||
95 | }; | ||
96 | |||
97 | static u8 hx8357_seq_display_frame[] = { | ||
98 | HX8357_SET_DISPLAY_FRAME, 0x0c, | ||
99 | }; | ||
100 | |||
101 | static u8 hx8357_seq_panel_related[] = { | ||
102 | HX8357_SET_PANEL_RELATED, 0x01, | ||
103 | }; | ||
104 | |||
105 | static u8 hx8357_seq_undefined1[] = { | ||
106 | 0xea, 0x03, 0x00, 0x00, | ||
107 | }; | ||
108 | |||
109 | static u8 hx8357_seq_undefined2[] = { | ||
110 | 0xeb, 0x40, 0x54, 0x26, 0xdb, | ||
111 | }; | ||
112 | |||
113 | static u8 hx8357_seq_gamma[] = { | ||
114 | HX8357_SET_GAMMA, 0x00, 0x15, 0x00, 0x22, 0x00, | ||
115 | 0x08, 0x77, 0x26, 0x77, 0x22, 0x04, 0x00, | ||
116 | }; | ||
117 | |||
118 | static u8 hx8357_seq_address_mode[] = { | ||
119 | HX8357_SET_ADDRESS_MODE, 0xc0, | ||
120 | }; | ||
121 | |||
122 | static u8 hx8357_seq_pixel_format[] = { | ||
123 | HX8357_SET_PIXEL_FORMAT, | ||
124 | HX8357_SET_PIXEL_FORMAT_DPI_18BIT | | ||
125 | HX8357_SET_PIXEL_FORMAT_DBI_18BIT, | ||
126 | }; | ||
127 | |||
128 | static u8 hx8357_seq_column_address[] = { | ||
129 | HX8357_SET_COLUMN_ADDRESS, 0x00, 0x00, 0x01, 0x3f, | ||
130 | }; | ||
131 | |||
132 | static u8 hx8357_seq_page_address[] = { | ||
133 | HX8357_SET_PAGE_ADDRESS, 0x00, 0x00, 0x01, 0xdf, | ||
134 | }; | ||
135 | |||
136 | static u8 hx8357_seq_rgb[] = { | ||
137 | HX8357_SET_RGB, 0x02, | ||
138 | }; | ||
139 | |||
140 | static u8 hx8357_seq_display_mode[] = { | ||
141 | HX8357_SET_DISPLAY_MODE, | ||
142 | HX8357_SET_DISPLAY_MODE_RGB_THROUGH | | ||
143 | HX8357_SET_DISPLAY_MODE_RGB_INTERFACE, | ||
144 | }; | ||
145 | |||
146 | static int hx8357_spi_write_then_read(struct lcd_device *lcdev, | ||
147 | u8 *txbuf, u16 txlen, | ||
148 | u8 *rxbuf, u16 rxlen) | ||
149 | { | ||
150 | struct hx8357_data *lcd = lcd_get_data(lcdev); | ||
151 | struct spi_message msg; | ||
152 | struct spi_transfer xfer[2]; | ||
153 | u16 *local_txbuf = NULL; | ||
154 | int ret = 0; | ||
155 | |||
156 | memset(xfer, 0, sizeof(xfer)); | ||
157 | spi_message_init(&msg); | ||
158 | |||
159 | if (txlen) { | ||
160 | int i; | ||
161 | |||
162 | local_txbuf = kcalloc(txlen, sizeof(*local_txbuf), GFP_KERNEL); | ||
163 | |||
164 | if (!local_txbuf) | ||
165 | return -ENOMEM; | ||
166 | |||
167 | for (i = 0; i < txlen; i++) { | ||
168 | local_txbuf[i] = txbuf[i]; | ||
169 | if (i > 0) | ||
170 | local_txbuf[i] |= 1 << 8; | ||
171 | } | ||
172 | |||
173 | xfer[0].len = 2 * txlen; | ||
174 | xfer[0].bits_per_word = 9; | ||
175 | xfer[0].tx_buf = local_txbuf; | ||
176 | spi_message_add_tail(&xfer[0], &msg); | ||
177 | } | ||
178 | |||
179 | if (rxlen) { | ||
180 | xfer[1].len = rxlen; | ||
181 | xfer[1].bits_per_word = 8; | ||
182 | xfer[1].rx_buf = rxbuf; | ||
183 | spi_message_add_tail(&xfer[1], &msg); | ||
184 | } | ||
185 | |||
186 | ret = spi_sync(lcd->spi, &msg); | ||
187 | if (ret < 0) | ||
188 | dev_err(&lcdev->dev, "Couldn't send SPI data\n"); | ||
189 | |||
190 | if (txlen) | ||
191 | kfree(local_txbuf); | ||
192 | |||
193 | return ret; | ||
194 | } | ||
195 | |||
196 | static inline int hx8357_spi_write_array(struct lcd_device *lcdev, | ||
197 | u8 *value, u8 len) | ||
198 | { | ||
199 | return hx8357_spi_write_then_read(lcdev, value, len, NULL, 0); | ||
200 | } | ||
201 | |||
202 | static inline int hx8357_spi_write_byte(struct lcd_device *lcdev, | ||
203 | u8 value) | ||
204 | { | ||
205 | return hx8357_spi_write_then_read(lcdev, &value, 1, NULL, 0); | ||
206 | } | ||
207 | |||
208 | static int hx8357_enter_standby(struct lcd_device *lcdev) | ||
209 | { | ||
210 | int ret; | ||
211 | |||
212 | ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_OFF); | ||
213 | if (ret < 0) | ||
214 | return ret; | ||
215 | |||
216 | usleep_range(10000, 12000); | ||
217 | |||
218 | ret = hx8357_spi_write_byte(lcdev, HX8357_ENTER_SLEEP_MODE); | ||
219 | if (ret < 0) | ||
220 | return ret; | ||
221 | |||
222 | msleep(120); | ||
223 | |||
224 | return 0; | ||
225 | } | ||
226 | |||
227 | static int hx8357_exit_standby(struct lcd_device *lcdev) | ||
228 | { | ||
229 | int ret; | ||
230 | |||
231 | ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE); | ||
232 | if (ret < 0) | ||
233 | return ret; | ||
234 | |||
235 | msleep(120); | ||
236 | |||
237 | ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON); | ||
238 | if (ret < 0) | ||
239 | return ret; | ||
240 | |||
241 | return 0; | ||
242 | } | ||
243 | |||
244 | static int hx8357_lcd_init(struct lcd_device *lcdev) | ||
245 | { | ||
246 | struct hx8357_data *lcd = lcd_get_data(lcdev); | ||
247 | int ret; | ||
248 | |||
249 | /* | ||
250 | * Set the interface selection pins to SPI mode, with three | ||
251 | * wires | ||
252 | */ | ||
253 | gpio_set_value_cansleep(lcd->im_pins[0], 1); | ||
254 | gpio_set_value_cansleep(lcd->im_pins[1], 0); | ||
255 | gpio_set_value_cansleep(lcd->im_pins[2], 1); | ||
256 | |||
257 | /* Reset the screen */ | ||
258 | gpio_set_value(lcd->reset, 1); | ||
259 | usleep_range(10000, 12000); | ||
260 | gpio_set_value(lcd->reset, 0); | ||
261 | usleep_range(10000, 12000); | ||
262 | gpio_set_value(lcd->reset, 1); | ||
263 | msleep(120); | ||
264 | |||
265 | ret = hx8357_spi_write_array(lcdev, hx8357_seq_power, | ||
266 | ARRAY_SIZE(hx8357_seq_power)); | ||
267 | if (ret < 0) | ||
268 | return ret; | ||
269 | |||
270 | ret = hx8357_spi_write_array(lcdev, hx8357_seq_vcom, | ||
271 | ARRAY_SIZE(hx8357_seq_vcom)); | ||
272 | if (ret < 0) | ||
273 | return ret; | ||
274 | |||
275 | ret = hx8357_spi_write_array(lcdev, hx8357_seq_power_normal, | ||
276 | ARRAY_SIZE(hx8357_seq_power_normal)); | ||
277 | if (ret < 0) | ||
278 | return ret; | ||
279 | |||
280 | ret = hx8357_spi_write_array(lcdev, hx8357_seq_panel_driving, | ||
281 | ARRAY_SIZE(hx8357_seq_panel_driving)); | ||
282 | if (ret < 0) | ||
283 | return ret; | ||
284 | |||
285 | ret = hx8357_spi_write_array(lcdev, hx8357_seq_display_frame, | ||
286 | ARRAY_SIZE(hx8357_seq_display_frame)); | ||
287 | if (ret < 0) | ||
288 | return ret; | ||
289 | |||
290 | ret = hx8357_spi_write_array(lcdev, hx8357_seq_panel_related, | ||
291 | ARRAY_SIZE(hx8357_seq_panel_related)); | ||
292 | if (ret < 0) | ||
293 | return ret; | ||
294 | |||
295 | ret = hx8357_spi_write_array(lcdev, hx8357_seq_undefined1, | ||
296 | ARRAY_SIZE(hx8357_seq_undefined1)); | ||
297 | if (ret < 0) | ||
298 | return ret; | ||
299 | |||
300 | ret = hx8357_spi_write_array(lcdev, hx8357_seq_undefined2, | ||
301 | ARRAY_SIZE(hx8357_seq_undefined2)); | ||
302 | if (ret < 0) | ||
303 | return ret; | ||
304 | |||
305 | ret = hx8357_spi_write_array(lcdev, hx8357_seq_gamma, | ||
306 | ARRAY_SIZE(hx8357_seq_gamma)); | ||
307 | if (ret < 0) | ||
308 | return ret; | ||
309 | |||
310 | ret = hx8357_spi_write_array(lcdev, hx8357_seq_address_mode, | ||
311 | ARRAY_SIZE(hx8357_seq_address_mode)); | ||
312 | if (ret < 0) | ||
313 | return ret; | ||
314 | |||
315 | ret = hx8357_spi_write_array(lcdev, hx8357_seq_pixel_format, | ||
316 | ARRAY_SIZE(hx8357_seq_pixel_format)); | ||
317 | if (ret < 0) | ||
318 | return ret; | ||
319 | |||
320 | ret = hx8357_spi_write_array(lcdev, hx8357_seq_column_address, | ||
321 | ARRAY_SIZE(hx8357_seq_column_address)); | ||
322 | if (ret < 0) | ||
323 | return ret; | ||
324 | |||
325 | ret = hx8357_spi_write_array(lcdev, hx8357_seq_page_address, | ||
326 | ARRAY_SIZE(hx8357_seq_page_address)); | ||
327 | if (ret < 0) | ||
328 | return ret; | ||
329 | |||
330 | ret = hx8357_spi_write_array(lcdev, hx8357_seq_rgb, | ||
331 | ARRAY_SIZE(hx8357_seq_rgb)); | ||
332 | if (ret < 0) | ||
333 | return ret; | ||
334 | |||
335 | ret = hx8357_spi_write_array(lcdev, hx8357_seq_display_mode, | ||
336 | ARRAY_SIZE(hx8357_seq_display_mode)); | ||
337 | if (ret < 0) | ||
338 | return ret; | ||
339 | |||
340 | ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE); | ||
341 | if (ret < 0) | ||
342 | return ret; | ||
343 | |||
344 | msleep(120); | ||
345 | |||
346 | ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON); | ||
347 | if (ret < 0) | ||
348 | return ret; | ||
349 | |||
350 | usleep_range(5000, 7000); | ||
351 | |||
352 | ret = hx8357_spi_write_byte(lcdev, HX8357_WRITE_MEMORY_START); | ||
353 | if (ret < 0) | ||
354 | return ret; | ||
355 | |||
356 | return 0; | ||
357 | } | ||
358 | |||
359 | #define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) | ||
360 | |||
361 | static int hx8357_set_power(struct lcd_device *lcdev, int power) | ||
362 | { | ||
363 | struct hx8357_data *lcd = lcd_get_data(lcdev); | ||
364 | int ret = 0; | ||
365 | |||
366 | if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->state)) | ||
367 | ret = hx8357_exit_standby(lcdev); | ||
368 | else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->state)) | ||
369 | ret = hx8357_enter_standby(lcdev); | ||
370 | |||
371 | if (ret == 0) | ||
372 | lcd->state = power; | ||
373 | else | ||
374 | dev_warn(&lcdev->dev, "failed to set power mode %d\n", power); | ||
375 | |||
376 | return ret; | ||
377 | } | ||
378 | |||
379 | static int hx8357_get_power(struct lcd_device *lcdev) | ||
380 | { | ||
381 | struct hx8357_data *lcd = lcd_get_data(lcdev); | ||
382 | |||
383 | return lcd->state; | ||
384 | } | ||
385 | |||
386 | static struct lcd_ops hx8357_ops = { | ||
387 | .set_power = hx8357_set_power, | ||
388 | .get_power = hx8357_get_power, | ||
389 | }; | ||
390 | |||
391 | static int hx8357_probe(struct spi_device *spi) | ||
392 | { | ||
393 | struct lcd_device *lcdev; | ||
394 | struct hx8357_data *lcd; | ||
395 | int i, ret; | ||
396 | |||
397 | lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL); | ||
398 | if (!lcd) { | ||
399 | dev_err(&spi->dev, "Couldn't allocate lcd internal structure!\n"); | ||
400 | return -ENOMEM; | ||
401 | } | ||
402 | |||
403 | ret = spi_setup(spi); | ||
404 | if (ret < 0) { | ||
405 | dev_err(&spi->dev, "SPI setup failed.\n"); | ||
406 | return ret; | ||
407 | } | ||
408 | |||
409 | lcd->spi = spi; | ||
410 | |||
411 | lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0); | ||
412 | if (!gpio_is_valid(lcd->reset)) { | ||
413 | dev_err(&spi->dev, "Missing dt property: gpios-reset\n"); | ||
414 | return -EINVAL; | ||
415 | } | ||
416 | |||
417 | ret = devm_gpio_request_one(&spi->dev, lcd->reset, | ||
418 | GPIOF_OUT_INIT_HIGH, | ||
419 | "hx8357-reset"); | ||
420 | if (ret) { | ||
421 | dev_err(&spi->dev, | ||
422 | "failed to request gpio %d: %d\n", | ||
423 | lcd->reset, ret); | ||
424 | return -EINVAL; | ||
425 | } | ||
426 | |||
427 | for (i = 0; i < HX8357_NUM_IM_PINS; i++) { | ||
428 | lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node, | ||
429 | "im-gpios", i); | ||
430 | if (lcd->im_pins[i] == -EPROBE_DEFER) { | ||
431 | dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n"); | ||
432 | return -EPROBE_DEFER; | ||
433 | } | ||
434 | if (!gpio_is_valid(lcd->im_pins[i])) { | ||
435 | dev_err(&spi->dev, "Missing dt property: im-gpios\n"); | ||
436 | return -EINVAL; | ||
437 | } | ||
438 | |||
439 | ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i], | ||
440 | GPIOF_OUT_INIT_LOW, "im_pins"); | ||
441 | if (ret) { | ||
442 | dev_err(&spi->dev, "failed to request gpio %d: %d\n", | ||
443 | lcd->im_pins[i], ret); | ||
444 | return -EINVAL; | ||
445 | } | ||
446 | } | ||
447 | |||
448 | lcdev = lcd_device_register("mxsfb", &spi->dev, lcd, &hx8357_ops); | ||
449 | if (IS_ERR(lcdev)) { | ||
450 | ret = PTR_ERR(lcdev); | ||
451 | return ret; | ||
452 | } | ||
453 | spi_set_drvdata(spi, lcdev); | ||
454 | |||
455 | ret = hx8357_lcd_init(lcdev); | ||
456 | if (ret) { | ||
457 | dev_err(&spi->dev, "Couldn't initialize panel\n"); | ||
458 | goto init_error; | ||
459 | } | ||
460 | |||
461 | dev_info(&spi->dev, "Panel probed\n"); | ||
462 | |||
463 | return 0; | ||
464 | |||
465 | init_error: | ||
466 | lcd_device_unregister(lcdev); | ||
467 | return ret; | ||
468 | } | ||
469 | |||
470 | static int hx8357_remove(struct spi_device *spi) | ||
471 | { | ||
472 | struct lcd_device *lcdev = spi_get_drvdata(spi); | ||
473 | |||
474 | lcd_device_unregister(lcdev); | ||
475 | return 0; | ||
476 | } | ||
477 | |||
478 | static const struct of_device_id hx8357_dt_ids[] = { | ||
479 | { .compatible = "himax,hx8357" }, | ||
480 | {}, | ||
481 | }; | ||
482 | MODULE_DEVICE_TABLE(of, hx8357_dt_ids); | ||
483 | |||
484 | static struct spi_driver hx8357_driver = { | ||
485 | .probe = hx8357_probe, | ||
486 | .remove = hx8357_remove, | ||
487 | .driver = { | ||
488 | .name = "hx8357", | ||
489 | .of_match_table = of_match_ptr(hx8357_dt_ids), | ||
490 | }, | ||
491 | }; | ||
492 | |||
493 | module_spi_driver(hx8357_driver); | ||
494 | |||
495 | MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); | ||
496 | MODULE_DESCRIPTION("Himax HX-8357 LCD Driver"); | ||
497 | MODULE_LICENSE("GPL"); | ||