5 files changed, 215 insertions, 83 deletions

diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 72c589109471..8b08121b390b 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -52,7 +52,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
@@ -457,6 +456,10 @@ static void wait_for_fifo(u16 entries, struct aty128fb_par *par);
 static void wait_for_idle(struct aty128fb_par *par);
 static u32 depth_to_dst(u32 depth);
 
+#ifdef CONFIG_FB_ATY128_BACKLIGHT
+static void aty128_bl_set_power(struct fb_info *info, int power);
+#endif
+
 #define BIOS_IN8(v)     (readb(bios + (v)))
 #define BIOS_IN16(v)    (readb(bios + (v)) | \
                           (readb(bios + (v) + 1) << 8))
@@ -1258,25 +1261,11 @@ static void aty128_set_lcd_enable(struct aty128fb_par *par, int on)
                 reg &= ~LVDS_DISPLAY_DIS;
                 aty_st_le32(LVDS_GEN_CNTL, reg);
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
-                mutex_lock(&info->bl_mutex);
-                if (info->bl_dev) {
-                        down(&info->bl_dev->sem);
-                        info->bl_dev->props->update_status(info->bl_dev);
-                        up(&info->bl_dev->sem);
-                }
-                mutex_unlock(&info->bl_mutex);
+                aty128_bl_set_power(info, FB_BLANK_UNBLANK);
 #endif  
         } else {
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
-                mutex_lock(&info->bl_mutex);
-                if (info->bl_dev) {
-                        down(&info->bl_dev->sem);
-                        info->bl_dev->props->brightness = 0;
-                        info->bl_dev->props->power = FB_BLANK_POWERDOWN;
-                        info->bl_dev->props->update_status(info->bl_dev);
-                        up(&info->bl_dev->sem);
-                }
-                mutex_unlock(&info->bl_mutex);
+                aty128_bl_set_power(info, FB_BLANK_POWERDOWN);
 #endif  
                 reg = aty_ld_le32(LVDS_GEN_CNTL);
                 reg |= LVDS_DISPLAY_DIS;
@@ -1703,6 +1692,7 @@ static int __devinit aty128fb_setup(char *options)
 
 static struct backlight_properties aty128_bl_data;
 
+/* Call with fb_info->bl_mutex held */
 static int aty128_bl_get_level_brightness(struct aty128fb_par *par,
                 int level)
 {
@@ -1710,10 +1700,8 @@ static int aty128_bl_get_level_brightness(struct aty128fb_par *par,
         int atylevel;
 
         /* Get and convert the value */
-        mutex_lock(&info->bl_mutex);
         atylevel = MAX_LEVEL -
                 (info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL);
-        mutex_unlock(&info->bl_mutex);
 
         if (atylevel < 0)
                 atylevel = 0;
@@ -1731,7 +1719,8 @@ static int aty128_bl_get_level_brightness(struct aty128fb_par *par,
 /* That one prevents proper CRT output with LCD off */
 #undef BACKLIGHT_DAC_OFF
 
-static int aty128_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __aty128_bl_update_status(struct backlight_device *bd)
 {
         struct aty128fb_par *par = class_get_devdata(&bd->class_dev);
         unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL);
@@ -1784,6 +1773,19 @@ static int aty128_bl_update_status(struct backlight_device *bd)
         return 0;
 }
 
+static int aty128_bl_update_status(struct backlight_device *bd)
+{
+        struct aty128fb_par *par = class_get_devdata(&bd->class_dev);
+        struct fb_info *info = pci_get_drvdata(par->pdev);
+        int ret;
+
+        mutex_lock(&info->bl_mutex);
+        ret = __aty128_bl_update_status(bd);
+        mutex_unlock(&info->bl_mutex);
+
+        return ret;
+}
+
 static int aty128_bl_get_brightness(struct backlight_device *bd)
 {
         return bd->props->brightness;
@@ -1796,6 +1798,16 @@ static struct backlight_properties aty128_bl_data = {
         .max_brightness = (FB_BACKLIGHT_LEVELS - 1),
 };
 
+static void aty128_bl_set_power(struct fb_info *info, int power)
+{
+        mutex_lock(&info->bl_mutex);
+        up(&info->bl_dev->sem);
+        info->bl_dev->props->power = power;
+        __aty128_bl_update_status(info->bl_dev);
+        down(&info->bl_dev->sem);
+        mutex_unlock(&info->bl_mutex);
+}
+
 static void aty128_bl_init(struct aty128fb_par *par)
 {
         struct fb_info *info = pci_get_drvdata(par->pdev);
@@ -2198,12 +2210,8 @@ static int aty128fb_blank(int blank, struct fb_info *fb)
                 return 0;
 
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
-        if (machine_is(powermac) && blank) {
-                down(&fb->bl_dev->sem);
-                fb->bl_dev->props->power = FB_BLANK_POWERDOWN;
-                fb->bl_dev->props->update_status(fb->bl_dev);
-                up(&fb->bl_dev->sem);
-        }
+        if (machine_is(powermac) && blank)
+                aty128_bl_set_power(fb, FB_BLANK_POWERDOWN);
 #endif
 
         if (blank & FB_BLANK_VSYNC_SUSPEND)
@@ -2219,14 +2227,12 @@ static int aty128fb_blank(int blank, struct fb_info *fb)
                 aty128_set_crt_enable(par, par->crt_on && !blank);
                 aty128_set_lcd_enable(par, par->lcd_on && !blank);
         }
+
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
-        if (machine_is(powermac) && !blank) {
-                down(&fb->bl_dev->sem);
-                fb->bl_dev->props->power = FB_BLANK_UNBLANK;
-                fb->bl_dev->props->update_status(fb->bl_dev);
-                up(&fb->bl_dev->sem);
-        }
+        if (machine_is(powermac) && !blank)
+                aty128_bl_set_power(fb, FB_BLANK_UNBLANK);
 #endif
+
         return 0;
 }
 
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 0c9706746d79..053ff63365b7 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2129,15 +2129,14 @@ static int atyfb_pci_resume(struct pci_dev *pdev)
 
 static struct backlight_properties aty_bl_data;
 
+/* Call with fb_info->bl_mutex held */
 static int aty_bl_get_level_brightness(struct atyfb_par *par, int level)
 {
         struct fb_info *info = pci_get_drvdata(par->pdev);
         int atylevel;
 
         /* Get and convert the value */
-        mutex_lock(&info->bl_mutex);
         atylevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
-        mutex_unlock(&info->bl_mutex);
 
         if (atylevel < 0)
                 atylevel = 0;
@@ -2147,7 +2146,8 @@ static int aty_bl_get_level_brightness(struct atyfb_par *par, int level)
         return atylevel;
 }
 
-static int aty_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __aty_bl_update_status(struct backlight_device *bd)
 {
         struct atyfb_par *par = class_get_devdata(&bd->class_dev);
         unsigned int reg = aty_ld_lcd(LCD_MISC_CNTL, par);
@@ -2172,6 +2172,19 @@ static int aty_bl_update_status(struct backlight_device *bd)
         return 0;
 }
 
+static int aty_bl_update_status(struct backlight_device *bd)
+{
+        struct atyfb_par *par = class_get_devdata(&bd->class_dev);
+        struct fb_info *info = pci_get_drvdata(par->pdev);
+        int ret;
+
+        mutex_lock(&info->bl_mutex);
+        ret = __aty_bl_update_status(bd);
+        mutex_unlock(&info->bl_mutex);
+
+        return ret;
+}
+
 static int aty_bl_get_brightness(struct backlight_device *bd)
 {
         return bd->props->brightness;
@@ -2184,6 +2197,16 @@ static struct backlight_properties aty_bl_data = {
         .max_brightness = (FB_BACKLIGHT_LEVELS - 1),
 };
 
+static void aty_bl_set_power(struct fb_info *info, int power)
+{
+        mutex_lock(&info->bl_mutex);
+        up(&info->bl_dev->sem);
+        info->bl_dev->props->power = power;
+        __aty_bl_update_status(info->bl_dev);
+        down(&info->bl_dev->sem);
+        mutex_unlock(&info->bl_mutex);
+}
+
 static void aty_bl_init(struct atyfb_par *par)
 {
         struct fb_info *info = pci_get_drvdata(par->pdev);
@@ -2789,17 +2812,9 @@ static int atyfb_blank(int blank, struct fb_info *info)
         if (par->lock_blank || par->asleep)
                 return 0;
 
-#ifdef CONFIG_PMAC_BACKLIGHT
-        if (machine_is(powermac) && blank > FB_BLANK_NORMAL) {
-                mutex_lock(&info->bl_mutex);
-                if (info->bl_dev) {
-                        down(&info->bl_dev->sem);
-                        info->bl_dev->props->power = FB_BLANK_POWERDOWN;
-                        info->bl_dev->props->update_status(info->bl_dev);
-                        up(&info->bl_dev->sem);
-                }
-                mutex_unlock(&info->bl_mutex);
-        }
+#ifdef CONFIG_FB_ATY_BACKLIGHT
+        if (machine_is(powermac) && blank > FB_BLANK_NORMAL)
+                aty_bl_set_power(info, FB_BLANK_POWERDOWN);
 #elif defined(CONFIG_FB_ATY_GENERIC_LCD)
         if (par->lcd_table && blank > FB_BLANK_NORMAL &&
             (aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
@@ -2829,17 +2844,9 @@ static int atyfb_blank(int blank, struct fb_info *info)
         }
         aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par);
 
-#ifdef CONFIG_PMAC_BACKLIGHT
-        if (machine_is(powermac) && blank <= FB_BLANK_NORMAL) {
-                mutex_lock(&info->bl_mutex);
-                if (info->bl_dev) {
-                        down(&info->bl_dev->sem);
-                        info->bl_dev->props->power = FB_BLANK_UNBLANK;
-                        info->bl_dev->props->update_status(info->bl_dev);
-                        up(&info->bl_dev->sem);
-                }
-                mutex_unlock(&info->bl_mutex);
-        }
+#ifdef CONFIG_FB_ATY_BACKLIGHT
+        if (machine_is(powermac) && blank <= FB_BLANK_NORMAL)
+                aty_bl_set_power(info, FB_BLANK_UNBLANK);
 #elif defined(CONFIG_FB_ATY_GENERIC_LCD)
         if (par->lcd_table && blank <= FB_BLANK_NORMAL &&
             (aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 60c37add2579..0ed577e7cc21 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -58,7 +58,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/time.h>
@@ -267,6 +266,8 @@ static int force_measure_pll = 0;
 #ifdef CONFIG_MTRR
 static int nomtrr = 0;
 #endif
+static int force_sleep;
+static int ignore_devlist;
 
 /*
  * prototypes
@@ -2328,9 +2329,9 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
                 /* -2 is special: means  ON on mobility chips and do not
                  * change on others
                  */
-                radeonfb_pm_init(rinfo, rinfo->is_mobility ? 1 : -1);
+                radeonfb_pm_init(rinfo, rinfo->is_mobility ? 1 : -1, ignore_devlist, force_sleep);
         } else
-                radeonfb_pm_init(rinfo, default_dynclk);
+                radeonfb_pm_init(rinfo, default_dynclk, ignore_devlist, force_sleep);
 
         pci_set_drvdata(pdev, info);
 
@@ -2478,6 +2479,12 @@ static int __init radeonfb_setup (char *options)
                         force_measure_pll = 1;
                 } else if (!strncmp(this_opt, "ignore_edid", 11)) {
                         ignore_edid = 1;
+#if defined(CONFIG_PM) && defined(CONFIG_X86)
+                } else if (!strncmp(this_opt, "force_sleep", 11)) {
+                        force_sleep = 1;
+                } else if (!strncmp(this_opt, "ignore_devlist", 14)) {
+                        ignore_devlist = 1;
+#endif
                 } else
                         mode_option = this_opt;
         }
@@ -2533,3 +2540,9 @@ module_param(panel_yres, int, 0);
 MODULE_PARM_DESC(panel_yres, "int: set panel yres");
 module_param(mode_option, charp, 0);
 MODULE_PARM_DESC(mode_option, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
+#if defined(CONFIG_PM) && defined(CONFIG_X86)
+module_param(force_sleep, bool, 0);
+MODULE_PARM_DESC(force_sleep, "bool: force D2 sleep mode on all hardware");
+module_param(ignore_devlist, bool, 0);
+MODULE_PARM_DESC(ignore_devlist, "bool: ignore workarounds for bugs in specific laptops");
+#endif
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index b9b9396d3bde..e308ed2d249a 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -27,6 +27,99 @@
 
 #include "ati_ids.h"
 
+static void radeon_reinitialize_M10(struct radeonfb_info *rinfo);
+
+/*
+ * Workarounds for bugs in PC laptops:
+ * - enable D2 sleep in some IBM Thinkpads
+ * - special case for Samsung P35
+ *
+ * Whitelist by subsystem vendor/device because
+ * its the subsystem vendor's fault!
+ */
+
+#if defined(CONFIG_PM) && defined(CONFIG_X86)
+struct radeon_device_id {
+        const char *ident;                     /* (arbitrary) Name */
+        const unsigned short subsystem_vendor; /* Subsystem Vendor ID */
+        const unsigned short subsystem_device; /* Subsystem Device ID */
+        const enum radeon_pm_mode pm_mode_modifier; /* modify pm_mode */
+        const reinit_function_ptr new_reinit_func;   /* changed reinit_func */
+};
+
+#define BUGFIX(model, sv, sd, pm, fn) { \
+        .ident = model, \
+        .subsystem_vendor = sv, \
+        .subsystem_device = sd, \
+        .pm_mode_modifier = pm, \
+        .new_reinit_func  = fn  \
+}
+
+static struct radeon_device_id radeon_workaround_list[] = {
+        BUGFIX("IBM Thinkpad R32",
+               PCI_VENDOR_ID_IBM, 0x1905,
+               radeon_pm_d2, NULL),
+        BUGFIX("IBM Thinkpad R40",
+               PCI_VENDOR_ID_IBM, 0x0526,
+               radeon_pm_d2, NULL),
+        BUGFIX("IBM Thinkpad R40",
+               PCI_VENDOR_ID_IBM, 0x0527,
+               radeon_pm_d2, NULL),
+        BUGFIX("IBM Thinkpad R50/R51/T40/T41",
+               PCI_VENDOR_ID_IBM, 0x0531,
+               radeon_pm_d2, NULL),
+        BUGFIX("IBM Thinkpad R51/T40/T41/T42",
+               PCI_VENDOR_ID_IBM, 0x0530,
+               radeon_pm_d2, NULL),
+        BUGFIX("IBM Thinkpad T30",
+               PCI_VENDOR_ID_IBM, 0x0517,
+               radeon_pm_d2, NULL),
+        BUGFIX("IBM Thinkpad T40p",
+               PCI_VENDOR_ID_IBM, 0x054d,
+               radeon_pm_d2, NULL),
+        BUGFIX("IBM Thinkpad T42",
+               PCI_VENDOR_ID_IBM, 0x0550,
+               radeon_pm_d2, NULL),
+        BUGFIX("IBM Thinkpad X31/X32",
+               PCI_VENDOR_ID_IBM, 0x052f,
+               radeon_pm_d2, NULL),
+        BUGFIX("Samsung P35",
+               PCI_VENDOR_ID_SAMSUNG, 0xc00c,
+               radeon_pm_off, radeon_reinitialize_M10),
+        { .ident = NULL }
+};
+
+static int radeon_apply_workarounds(struct radeonfb_info *rinfo)
+{
+        struct radeon_device_id *id;
+
+        for (id = radeon_workaround_list; id->ident != NULL; id++ )
+                if ((id->subsystem_vendor == rinfo->pdev->subsystem_vendor ) &&
+                    (id->subsystem_device == rinfo->pdev->subsystem_device )) {
+
+                        /* we found a device that requires workaround */
+                        printk(KERN_DEBUG "radeonfb: %s detected"
+                               ", enabling workaround\n", id->ident);
+
+                        rinfo->pm_mode |= id->pm_mode_modifier;
+
+                        if (id->new_reinit_func != NULL)
+                                rinfo->reinit_func = id->new_reinit_func;
+
+                        return 1;
+                }
+        return 0;  /* not found */
+}
+
+#else  /* defined(CONFIG_PM) && defined(CONFIG_X86) */
+static inline int radeon_apply_workarounds(struct radeonfb_info *rinfo)
+{
+        return 0;
+}
+#endif /* defined(CONFIG_PM) && defined(CONFIG_X86) */
+
+
+
 static void radeon_pm_disable_dynamic_mode(struct radeonfb_info *rinfo)
 {
         u32 tmp;
@@ -852,18 +945,26 @@ static void radeon_pm_setup_for_suspend(struct radeonfb_info *rinfo)
         /* because both INPLL and OUTPLL take the same lock, that's why. */
         tmp = INPLL( pllMCLK_MISC) | MCLK_MISC__EN_MCLK_TRISTATE_IN_SUSPEND;
         OUTPLL( pllMCLK_MISC, tmp);
-        
-        /* AGP PLL control */
-        if (rinfo->family <= CHIP_FAMILY_RV280) {
-                OUTREG(BUS_CNTL1, INREG(BUS_CNTL1) |  BUS_CNTL1__AGPCLK_VALID);
 
-                OUTREG(BUS_CNTL1,
-                       (INREG(BUS_CNTL1) & ~BUS_CNTL1__MOBILE_PLATFORM_SEL_MASK)
-                       | (2<<BUS_CNTL1__MOBILE_PLATFORM_SEL__SHIFT));   // 440BX
-        } else {
-                OUTREG(BUS_CNTL1, INREG(BUS_CNTL1));
-                OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1) & ~0x4000) | 0x8000);
+        /* BUS_CNTL1__MOBILE_PLATORM_SEL setting is northbridge chipset
+         * and radeon chip dependent. Thus we only enable it on Mac for
+         * now (until we get more info on how to compute the correct
+         * value for various X86 bridges).
+         */
+#ifdef CONFIG_PPC_PMAC
+        if (machine_is(powermac)) {
+                /* AGP PLL control */
+                if (rinfo->family <= CHIP_FAMILY_RV280) {
+                        OUTREG(BUS_CNTL1, INREG(BUS_CNTL1) |  BUS_CNTL1__AGPCLK_VALID);
+                        OUTREG(BUS_CNTL1,
+                               (INREG(BUS_CNTL1) & ~BUS_CNTL1__MOBILE_PLATFORM_SEL_MASK)
+                               | (2<<BUS_CNTL1__MOBILE_PLATFORM_SEL__SHIFT));   // 440BX
+                } else {
+                        OUTREG(BUS_CNTL1, INREG(BUS_CNTL1));
+                        OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1) & ~0x4000) | 0x8000);
+                }
         }
+#endif
 
         OUTREG(CRTC_OFFSET_CNTL, (INREG(CRTC_OFFSET_CNTL)
                                   & ~CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_OUT_EN));
@@ -2713,7 +2814,7 @@ static void radeonfb_early_resume(void *data)
 
 #endif /* CONFIG_PM */
 
-void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk)
+void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlist, int force_sleep)
 {
         /* Find PM registers in config space if any*/
         rinfo->pm_reg = pci_find_capability(rinfo->pdev, PCI_CAP_ID_PM);
@@ -2729,22 +2830,13 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk)
         }
 
 #if defined(CONFIG_PM)
+#if defined(CONFIG_PPC_PMAC)
         /* Check if we can power manage on suspend/resume. We can do
          * D2 on M6, M7 and M9, and we can resume from D3 cold a few other
          * "Mac" cards, but that's all. We need more infos about what the
          * BIOS does tho. Right now, all this PM stuff is pmac-only for that
          * reason. --BenH
          */
-        /* Special case for Samsung P35 laptops
-         */
-        if ((rinfo->pdev->vendor == PCI_VENDOR_ID_ATI) &&
-            (rinfo->pdev->device == PCI_CHIP_RV350_NP) &&
-            (rinfo->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG) &&
-            (rinfo->pdev->subsystem_device == 0xc00c)) {
-                rinfo->reinit_func = radeon_reinitialize_M10;
-                rinfo->pm_mode |= radeon_pm_off;
-        }
-#if defined(CONFIG_PPC_PMAC)
         if (machine_is(powermac) && rinfo->of_node) {
                 if (rinfo->is_mobility && rinfo->pm_reg &&
                     rinfo->family <= CHIP_FAMILY_RV250)
@@ -2790,6 +2882,18 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk)
         }
 #endif /* defined(CONFIG_PPC_PMAC) */
 #endif /* defined(CONFIG_PM) */
+
+        if (ignore_devlist)
+                printk(KERN_DEBUG
+                       "radeonfb: skipping test for device workarounds\n");
+        else
+                radeon_apply_workarounds(rinfo);
+
+        if (force_sleep) {
+                printk(KERN_DEBUG
+                       "radeonfb: forcefully enabling D2 sleep mode\n");
+                rinfo->pm_mode |= radeon_pm_d2;
+        }
 }
 
 void radeonfb_pm_exit(struct radeonfb_info *rinfo)
diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h
index 38657b2d10eb..d5ff224a6258 100644
--- a/drivers/video/aty/radeonfb.h
+++ b/drivers/video/aty/radeonfb.h
@@ -273,6 +273,8 @@ enum radeon_pm_mode {
         radeon_pm_off   = 0x00000002,   /* Can resume from D3 cold */
 };
 
+typedef void (*reinit_function_ptr)(struct radeonfb_info *rinfo);
+
 struct radeonfb_info {
         struct fb_info          *info;
 
@@ -338,7 +340,7 @@ struct radeonfb_info {
         int                     dynclk;
         int                     no_schedule;
         enum radeon_pm_mode     pm_mode;
-        void                    (*reinit_func)(struct radeonfb_info *rinfo);
+        reinit_function_ptr     reinit_func;
 
         /* Lock on register access */
         spinlock_t              reg_lock;
@@ -600,7 +602,7 @@ extern int radeon_probe_i2c_connector(struct radeonfb_info *rinfo, int conn, u8
 /* PM Functions */
 extern int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t state);
 extern int radeonfb_pci_resume(struct pci_dev *pdev);
-extern void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk);
+extern void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlist, int force_sleep);
 extern void radeonfb_pm_exit(struct radeonfb_info *rinfo);
 
 /* Monitor probe functions */