1 files changed, 19 insertions, 14 deletions

diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index db16112cf197..e6e299feb51b 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1475,7 +1475,7 @@ static int aty128fb_set_par(struct fb_info *info)
         aty128_set_pll(&par->pll, par);
         aty128_set_fifo(&par->fifo_reg, par);
 
-        config = aty_ld_le32(CONFIG_CNTL) & ~3;
+        config = aty_ld_le32(CNFG_CNTL) & ~3;
 
 #if defined(__BIG_ENDIAN)
         if (par->crtc.bpp == 32)
@@ -1484,7 +1484,7 @@ static int aty128fb_set_par(struct fb_info *info)
                 config |= 1;    /* make aperture do 16 bit swapping */
 #endif
 
-        aty_st_le32(CONFIG_CNTL, config);
+        aty_st_le32(CNFG_CNTL, config);
         aty_st_8(CRTC_EXT_CNTL + 1, 0); /* turn the video back on */
 
         info->fix.line_length = (par->crtc.vxres * par->crtc.bpp) >> 3;
@@ -1875,7 +1875,7 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i
         u32 dac;
 
         /* Get the chip revision */
-        chip_rev = (aty_ld_le32(CONFIG_CNTL) >> 16) & 0x1F;
+        chip_rev = (aty_ld_le32(CNFG_CNTL) >> 16) & 0x1F;
 
         strcpy(video_card, "Rage128 XX ");
         video_card[8] = ent->device >> 8;
@@ -2057,7 +2057,7 @@ static int __devinit aty128_probe(struct pci_dev *pdev, const struct pci_device_
 
         /* Grab memory size from the card */
         // How does this relate to the resource length from the PCI hardware?
-        par->vram_size = aty_ld_le32(CONFIG_MEMSIZE) & 0x03FFFFFF;
+        par->vram_size = aty_ld_le32(CNFG_MEMSIZE) & 0x03FFFFFF;
 
         /* Virtualize the framebuffer */
         info->screen_base = ioremap(fb_addr, par->vram_size);
@@ -2374,6 +2374,8 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
         /* Set the chip into the appropriate suspend mode (we use D2,
          * D3 would require a complete re-initialisation of the chip,
          * including PCI config registers, clocks, AGP configuration, ...)
+         *
+         * For resume, the core will have already brought us back to D0
          */
         if (suspend) {
                 /* Make sure CRTC2 is reset. Remove that the day we decide to
@@ -2391,17 +2393,9 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
                 aty_st_le32(BUS_CNTL1, 0x00000010);
                 aty_st_le32(MEM_POWER_MISC, 0x0c830000);
                 mdelay(100);
-                pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+
                 /* Switch PCI power management to D2 */
-                pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL,
-                        (pwr_command & ~PCI_PM_CTRL_STATE_MASK) | 2);
-                pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
-        } else {
-                /* Switch back PCI power management to D0 */
-                mdelay(100);
-                pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, 0);
-                pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
-                mdelay(100);
+                pci_set_power_state(pdev, PCI_D2);
         }
 }
 
@@ -2410,6 +2404,12 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state)
         struct fb_info *info = pci_get_drvdata(pdev);
         struct aty128fb_par *par = info->par;
 
+        /* Because we may change PCI D state ourselves, we need to
+         * first save the config space content so the core can
+         * restore it properly on resume.
+         */
+        pci_save_state(pdev);
+
         /* We don't do anything but D2, for now we return 0, but
          * we may want to change that. How do we know if the BIOS
          * can properly take care of D3 ? Also, with swsusp, we
@@ -2476,6 +2476,11 @@ static int aty128_do_resume(struct pci_dev *pdev)
         if (pdev->dev.power.power_state.event == PM_EVENT_ON)
                 return 0;
 
+        /* PCI state will have been restored by the core, so
+         * we should be in D0 now with our config space fully
+         * restored
+         */
+
         /* Wakeup chip */
         aty128_set_suspend(par, 0);
         par->asleep = 0;