diff options
Diffstat (limited to 'drivers/uwb')
-rw-r--r-- | drivers/uwb/Kconfig | 20 | ||||
-rw-r--r-- | drivers/uwb/Makefile | 2 | ||||
-rw-r--r-- | drivers/uwb/whc-rc.c | 528 |
3 files changed, 549 insertions, 1 deletions
diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig index 3f01a69daf8b..c0eb973111ef 100644 --- a/drivers/uwb/Kconfig +++ b/drivers/uwb/Kconfig | |||
@@ -26,3 +26,23 @@ menuconfig UWB | |||
26 | <file:Documentation/usb/>. | 26 | <file:Documentation/usb/>. |
27 | 27 | ||
28 | To compile the UWB stack as a module, choose M here. | 28 | To compile the UWB stack as a module, choose M here. |
29 | |||
30 | if UWB | ||
31 | |||
32 | config UWB_WHCI | ||
33 | tristate "UWB Radio Control driver for WHCI-compliant cards" | ||
34 | depends on PCI | ||
35 | help | ||
36 | This driver enables the radio controller for WHCI cards. | ||
37 | |||
38 | WHCI is an specification developed by Intel | ||
39 | (http://www.intel.com/technology/comms/wusb/whci.htm) much | ||
40 | in the spirit of USB's EHCI, but for UWB and Wireless USB | ||
41 | radio/host controllers connected via memmory mapping (eg: | ||
42 | PCI). Most of these cards come also with a Wireless USB host | ||
43 | controller. | ||
44 | |||
45 | To compile this driver select Y (built in) or M (module). It | ||
46 | is safe to select any even if you do not have the hardware. | ||
47 | |||
48 | endif # UWB | ||
diff --git a/drivers/uwb/Makefile b/drivers/uwb/Makefile index b054471af28d..bdcb494b00e0 100644 --- a/drivers/uwb/Makefile +++ b/drivers/uwb/Makefile | |||
@@ -1,5 +1,5 @@ | |||
1 | obj-$(CONFIG_UWB) += uwb.o | 1 | obj-$(CONFIG_UWB) += uwb.o |
2 | obj-$(CONFIG_UWB_WHCI) += umc.o whci.o | 2 | obj-$(CONFIG_UWB_WHCI) += umc.o whci.o whc-rc.o |
3 | 3 | ||
4 | uwb-objs := \ | 4 | uwb-objs := \ |
5 | address.o \ | 5 | address.o \ |
diff --git a/drivers/uwb/whc-rc.c b/drivers/uwb/whc-rc.c new file mode 100644 index 000000000000..5a93abea6d23 --- /dev/null +++ b/drivers/uwb/whc-rc.c | |||
@@ -0,0 +1,528 @@ | |||
1 | /* | ||
2 | * Wireless Host Controller: Radio Control Interface (WHCI v0.95[2.3]) | ||
3 | * Radio Control command/event transport to the UWB stack | ||
4 | * | ||
5 | * Copyright (C) 2005-2006 Intel Corporation | ||
6 | * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> | ||
7 | * | ||
8 | * This program is free software; you can redistribute it and/or | ||
9 | * modify it under the terms of the GNU General Public License version | ||
10 | * 2 as published by the Free Software Foundation. | ||
11 | * | ||
12 | * This program is distributed in the hope that it will be useful, | ||
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
15 | * GNU General Public License for more details. | ||
16 | * | ||
17 | * You should have received a copy of the GNU General Public License | ||
18 | * along with this program; if not, write to the Free Software | ||
19 | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA | ||
20 | * 02110-1301, USA. | ||
21 | * | ||
22 | * | ||
23 | * Initialize and hook up the Radio Control interface. | ||
24 | * | ||
25 | * For each device probed, creates an 'struct whcrc' which contains | ||
26 | * just the representation of the UWB Radio Controller, and the logic | ||
27 | * for reading notifications and passing them to the UWB Core. | ||
28 | * | ||
29 | * So we initialize all of those, register the UWB Radio Controller | ||
30 | * and setup the notification/event handle to pipe the notifications | ||
31 | * to the UWB management Daemon. | ||
32 | * | ||
33 | * Once uwb_rc_add() is called, the UWB stack takes control, resets | ||
34 | * the radio and readies the device to take commands the UWB | ||
35 | * API/user-space. | ||
36 | * | ||
37 | * Note this driver is just a transport driver; the commands are | ||
38 | * formed at the UWB stack and given to this driver who will deliver | ||
39 | * them to the hw and transfer the replies/notifications back to the | ||
40 | * UWB stack through the UWB daemon (UWBD). | ||
41 | */ | ||
42 | #include <linux/version.h> | ||
43 | #include <linux/init.h> | ||
44 | #include <linux/module.h> | ||
45 | #include <linux/pci.h> | ||
46 | #include <linux/dma-mapping.h> | ||
47 | #include <linux/interrupt.h> | ||
48 | #include <linux/workqueue.h> | ||
49 | #include <linux/uwb.h> | ||
50 | #include <linux/uwb/whci.h> | ||
51 | #include <linux/uwb/umc.h> | ||
52 | #include "uwb-internal.h" | ||
53 | |||
54 | #define D_LOCAL 0 | ||
55 | #include <linux/uwb/debug.h> | ||
56 | |||
57 | /** | ||
58 | * Descriptor for an instance of the UWB Radio Control Driver that | ||
59 | * attaches to the URC interface of the WHCI PCI card. | ||
60 | * | ||
61 | * Unless there is a lock specific to the 'data members', all access | ||
62 | * is protected by uwb_rc->mutex. | ||
63 | */ | ||
64 | struct whcrc { | ||
65 | struct umc_dev *umc_dev; | ||
66 | struct uwb_rc *uwb_rc; /* UWB host controller */ | ||
67 | |||
68 | unsigned long area; | ||
69 | void __iomem *rc_base; | ||
70 | size_t rc_len; | ||
71 | spinlock_t irq_lock; | ||
72 | |||
73 | void *evt_buf, *cmd_buf; | ||
74 | dma_addr_t evt_dma_buf, cmd_dma_buf; | ||
75 | wait_queue_head_t cmd_wq; | ||
76 | struct work_struct event_work; | ||
77 | }; | ||
78 | |||
79 | /** | ||
80 | * Execute an UWB RC command on WHCI/RC | ||
81 | * | ||
82 | * @rc: Instance of a Radio Controller that is a whcrc | ||
83 | * @cmd: Buffer containing the RCCB and payload to execute | ||
84 | * @cmd_size: Size of the command buffer. | ||
85 | * | ||
86 | * We copy the command into whcrc->cmd_buf (as it is pretty and | ||
87 | * aligned`and physically contiguous) and then press the right keys in | ||
88 | * the controller's URCCMD register to get it to read it. We might | ||
89 | * have to wait for the cmd_sem to be open to us. | ||
90 | * | ||
91 | * NOTE: rc's mutex has to be locked | ||
92 | */ | ||
93 | static int whcrc_cmd(struct uwb_rc *uwb_rc, | ||
94 | const struct uwb_rccb *cmd, size_t cmd_size) | ||
95 | { | ||
96 | int result = 0; | ||
97 | struct whcrc *whcrc = uwb_rc->priv; | ||
98 | struct device *dev = &whcrc->umc_dev->dev; | ||
99 | u32 urccmd; | ||
100 | |||
101 | d_fnstart(3, dev, "(%p, %p, %zu)\n", uwb_rc, cmd, cmd_size); | ||
102 | might_sleep(); | ||
103 | |||
104 | if (cmd_size >= 4096) { | ||
105 | result = -E2BIG; | ||
106 | goto error; | ||
107 | } | ||
108 | |||
109 | /* | ||
110 | * If the URC is halted, then the hardware has reset itself. | ||
111 | * Attempt to recover by restarting the device and then return | ||
112 | * an error as it's likely that the current command isn't | ||
113 | * valid for a newly started RC. | ||
114 | */ | ||
115 | if (le_readl(whcrc->rc_base + URCSTS) & URCSTS_HALTED) { | ||
116 | dev_err(dev, "requesting reset of halted radio controller\n"); | ||
117 | uwb_rc_reset_all(uwb_rc); | ||
118 | result = -EIO; | ||
119 | goto error; | ||
120 | } | ||
121 | |||
122 | result = wait_event_timeout(whcrc->cmd_wq, | ||
123 | !(le_readl(whcrc->rc_base + URCCMD) & URCCMD_ACTIVE), HZ/2); | ||
124 | if (result == 0) { | ||
125 | dev_err(dev, "device is not ready to execute commands\n"); | ||
126 | result = -ETIMEDOUT; | ||
127 | goto error; | ||
128 | } | ||
129 | |||
130 | memmove(whcrc->cmd_buf, cmd, cmd_size); | ||
131 | le_writeq(whcrc->cmd_dma_buf, whcrc->rc_base + URCCMDADDR); | ||
132 | |||
133 | spin_lock(&whcrc->irq_lock); | ||
134 | urccmd = le_readl(whcrc->rc_base + URCCMD); | ||
135 | urccmd &= ~(URCCMD_EARV | URCCMD_SIZE_MASK); | ||
136 | le_writel(urccmd | URCCMD_ACTIVE | URCCMD_IWR | cmd_size, | ||
137 | whcrc->rc_base + URCCMD); | ||
138 | spin_unlock(&whcrc->irq_lock); | ||
139 | |||
140 | error: | ||
141 | d_fnend(3, dev, "(%p, %p, %zu) = %d\n", | ||
142 | uwb_rc, cmd, cmd_size, result); | ||
143 | return result; | ||
144 | } | ||
145 | |||
146 | static int whcrc_reset(struct uwb_rc *rc) | ||
147 | { | ||
148 | struct whcrc *whcrc = rc->priv; | ||
149 | |||
150 | return umc_controller_reset(whcrc->umc_dev); | ||
151 | } | ||
152 | |||
153 | /** | ||
154 | * Reset event reception mechanism and tell hw we are ready to get more | ||
155 | * | ||
156 | * We have read all the events in the event buffer, so we are ready to | ||
157 | * reset it to the beginning. | ||
158 | * | ||
159 | * This is only called during initialization or after an event buffer | ||
160 | * has been retired. This means we can be sure that event processing | ||
161 | * is disabled and it's safe to update the URCEVTADDR register. | ||
162 | * | ||
163 | * There's no need to wait for the event processing to start as the | ||
164 | * URC will not clear URCCMD_ACTIVE until (internal) event buffer | ||
165 | * space is available. | ||
166 | */ | ||
167 | static | ||
168 | void whcrc_enable_events(struct whcrc *whcrc) | ||
169 | { | ||
170 | struct device *dev = &whcrc->umc_dev->dev; | ||
171 | u32 urccmd; | ||
172 | |||
173 | d_fnstart(4, dev, "(whcrc %p)\n", whcrc); | ||
174 | |||
175 | le_writeq(whcrc->evt_dma_buf, whcrc->rc_base + URCEVTADDR); | ||
176 | |||
177 | spin_lock(&whcrc->irq_lock); | ||
178 | urccmd = le_readl(whcrc->rc_base + URCCMD) & ~URCCMD_ACTIVE; | ||
179 | le_writel(urccmd | URCCMD_EARV, whcrc->rc_base + URCCMD); | ||
180 | spin_unlock(&whcrc->irq_lock); | ||
181 | |||
182 | d_fnend(4, dev, "(whcrc %p) = void\n", whcrc); | ||
183 | } | ||
184 | |||
185 | static void whcrc_event_work(struct work_struct *work) | ||
186 | { | ||
187 | struct whcrc *whcrc = container_of(work, struct whcrc, event_work); | ||
188 | struct device *dev = &whcrc->umc_dev->dev; | ||
189 | size_t size; | ||
190 | u64 urcevtaddr; | ||
191 | |||
192 | urcevtaddr = le_readq(whcrc->rc_base + URCEVTADDR); | ||
193 | size = urcevtaddr & URCEVTADDR_OFFSET_MASK; | ||
194 | |||
195 | d_printf(3, dev, "received %zu octet event\n", size); | ||
196 | d_dump(4, dev, whcrc->evt_buf, size > 32 ? 32 : size); | ||
197 | |||
198 | uwb_rc_neh_grok(whcrc->uwb_rc, whcrc->evt_buf, size); | ||
199 | whcrc_enable_events(whcrc); | ||
200 | } | ||
201 | |||
202 | /** | ||
203 | * Catch interrupts? | ||
204 | * | ||
205 | * We ack inmediately (and expect the hw to do the right thing and | ||
206 | * raise another IRQ if things have changed :) | ||
207 | */ | ||
208 | static | ||
209 | irqreturn_t whcrc_irq_cb(int irq, void *_whcrc) | ||
210 | { | ||
211 | struct whcrc *whcrc = _whcrc; | ||
212 | struct device *dev = &whcrc->umc_dev->dev; | ||
213 | u32 urcsts; | ||
214 | |||
215 | d_fnstart(4, dev, "irq %d _whcrc %p)\n", irq, _whcrc); | ||
216 | urcsts = le_readl(whcrc->rc_base + URCSTS); | ||
217 | if (!(urcsts & URCSTS_INT_MASK)) | ||
218 | return IRQ_NONE; | ||
219 | le_writel(urcsts & URCSTS_INT_MASK, whcrc->rc_base + URCSTS); | ||
220 | |||
221 | d_printf(4, dev, "acked 0x%08x, urcsts 0x%08x\n", | ||
222 | le_readl(whcrc->rc_base + URCSTS), urcsts); | ||
223 | |||
224 | if (whcrc->uwb_rc == NULL) { | ||
225 | if (printk_ratelimit()) | ||
226 | dev_dbg(dev, "Received interrupt when not yet " | ||
227 | "ready!\n"); | ||
228 | goto out; | ||
229 | } | ||
230 | |||
231 | if (urcsts & URCSTS_HSE) { | ||
232 | dev_err(dev, "host system error -- hardware halted\n"); | ||
233 | /* FIXME: do something sensible here */ | ||
234 | goto out; | ||
235 | } | ||
236 | if (urcsts & URCSTS_ER) { | ||
237 | d_printf(3, dev, "ER: event ready\n"); | ||
238 | schedule_work(&whcrc->event_work); | ||
239 | } | ||
240 | if (urcsts & URCSTS_RCI) { | ||
241 | d_printf(3, dev, "RCI: ready to execute another command\n"); | ||
242 | wake_up_all(&whcrc->cmd_wq); | ||
243 | } | ||
244 | out: | ||
245 | return IRQ_HANDLED; | ||
246 | } | ||
247 | |||
248 | |||
249 | /** | ||
250 | * Initialize a UMC RC interface: map regions, get (shared) IRQ | ||
251 | */ | ||
252 | static | ||
253 | int whcrc_setup_rc_umc(struct whcrc *whcrc) | ||
254 | { | ||
255 | int result = 0; | ||
256 | struct device *dev = &whcrc->umc_dev->dev; | ||
257 | struct umc_dev *umc_dev = whcrc->umc_dev; | ||
258 | |||
259 | whcrc->area = umc_dev->resource.start; | ||
260 | whcrc->rc_len = umc_dev->resource.end - umc_dev->resource.start + 1; | ||
261 | result = -EBUSY; | ||
262 | if (request_mem_region(whcrc->area, whcrc->rc_len, KBUILD_MODNAME) | ||
263 | == NULL) { | ||
264 | dev_err(dev, "can't request URC region (%zu bytes @ 0x%lx): %d\n", | ||
265 | whcrc->rc_len, whcrc->area, result); | ||
266 | goto error_request_region; | ||
267 | } | ||
268 | |||
269 | whcrc->rc_base = ioremap_nocache(whcrc->area, whcrc->rc_len); | ||
270 | if (whcrc->rc_base == NULL) { | ||
271 | dev_err(dev, "can't ioremap registers (%zu bytes @ 0x%lx): %d\n", | ||
272 | whcrc->rc_len, whcrc->area, result); | ||
273 | goto error_ioremap_nocache; | ||
274 | } | ||
275 | |||
276 | result = request_irq(umc_dev->irq, whcrc_irq_cb, IRQF_SHARED, | ||
277 | KBUILD_MODNAME, whcrc); | ||
278 | if (result < 0) { | ||
279 | dev_err(dev, "can't allocate IRQ %d: %d\n", | ||
280 | umc_dev->irq, result); | ||
281 | goto error_request_irq; | ||
282 | } | ||
283 | |||
284 | result = -ENOMEM; | ||
285 | whcrc->cmd_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE, | ||
286 | &whcrc->cmd_dma_buf, GFP_KERNEL); | ||
287 | if (whcrc->cmd_buf == NULL) { | ||
288 | dev_err(dev, "Can't allocate cmd transfer buffer\n"); | ||
289 | goto error_cmd_buffer; | ||
290 | } | ||
291 | |||
292 | whcrc->evt_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE, | ||
293 | &whcrc->evt_dma_buf, GFP_KERNEL); | ||
294 | if (whcrc->evt_buf == NULL) { | ||
295 | dev_err(dev, "Can't allocate evt transfer buffer\n"); | ||
296 | goto error_evt_buffer; | ||
297 | } | ||
298 | d_printf(3, dev, "UWB RC Interface: %zu bytes at 0x%p, irq %u\n", | ||
299 | whcrc->rc_len, whcrc->rc_base, umc_dev->irq); | ||
300 | return 0; | ||
301 | |||
302 | error_evt_buffer: | ||
303 | dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf, | ||
304 | whcrc->cmd_dma_buf); | ||
305 | error_cmd_buffer: | ||
306 | free_irq(umc_dev->irq, whcrc); | ||
307 | error_request_irq: | ||
308 | iounmap(whcrc->rc_base); | ||
309 | error_ioremap_nocache: | ||
310 | release_mem_region(whcrc->area, whcrc->rc_len); | ||
311 | error_request_region: | ||
312 | return result; | ||
313 | } | ||
314 | |||
315 | |||
316 | /** | ||
317 | * Release RC's UMC resources | ||
318 | */ | ||
319 | static | ||
320 | void whcrc_release_rc_umc(struct whcrc *whcrc) | ||
321 | { | ||
322 | struct umc_dev *umc_dev = whcrc->umc_dev; | ||
323 | |||
324 | dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->evt_buf, | ||
325 | whcrc->evt_dma_buf); | ||
326 | dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf, | ||
327 | whcrc->cmd_dma_buf); | ||
328 | free_irq(umc_dev->irq, whcrc); | ||
329 | iounmap(whcrc->rc_base); | ||
330 | release_mem_region(whcrc->area, whcrc->rc_len); | ||
331 | } | ||
332 | |||
333 | |||
334 | /** | ||
335 | * whcrc_start_rc - start a WHCI radio controller | ||
336 | * @whcrc: the radio controller to start | ||
337 | * | ||
338 | * Reset the UMC device, start the radio controller, enable events and | ||
339 | * finally enable interrupts. | ||
340 | */ | ||
341 | static int whcrc_start_rc(struct uwb_rc *rc) | ||
342 | { | ||
343 | struct whcrc *whcrc = rc->priv; | ||
344 | int result = 0; | ||
345 | struct device *dev = &whcrc->umc_dev->dev; | ||
346 | unsigned long start, duration; | ||
347 | |||
348 | /* Reset the thing */ | ||
349 | le_writel(URCCMD_RESET, whcrc->rc_base + URCCMD); | ||
350 | if (d_test(3)) | ||
351 | start = jiffies; | ||
352 | if (whci_wait_for(dev, whcrc->rc_base + URCCMD, URCCMD_RESET, 0, | ||
353 | 5000, "device to reset at init") < 0) { | ||
354 | result = -EBUSY; | ||
355 | goto error; | ||
356 | } else if (d_test(3)) { | ||
357 | duration = jiffies - start; | ||
358 | if (duration > msecs_to_jiffies(40)) | ||
359 | dev_err(dev, "Device took %ums to " | ||
360 | "reset. MAX expected: 40ms\n", | ||
361 | jiffies_to_msecs(duration)); | ||
362 | } | ||
363 | |||
364 | /* Set the event buffer, start the controller (enable IRQs later) */ | ||
365 | le_writel(0, whcrc->rc_base + URCINTR); | ||
366 | le_writel(URCCMD_RS, whcrc->rc_base + URCCMD); | ||
367 | result = -ETIMEDOUT; | ||
368 | if (d_test(3)) | ||
369 | start = jiffies; | ||
370 | if (whci_wait_for(dev, whcrc->rc_base + URCSTS, URCSTS_HALTED, 0, | ||
371 | 5000, "device to start") < 0) | ||
372 | goto error; | ||
373 | if (d_test(3)) { | ||
374 | duration = jiffies - start; | ||
375 | if (duration > msecs_to_jiffies(40)) | ||
376 | dev_err(dev, "Device took %ums to start. " | ||
377 | "MAX expected: 40ms\n", | ||
378 | jiffies_to_msecs(duration)); | ||
379 | } | ||
380 | whcrc_enable_events(whcrc); | ||
381 | result = 0; | ||
382 | le_writel(URCINTR_EN_ALL, whcrc->rc_base + URCINTR); | ||
383 | error: | ||
384 | return result; | ||
385 | } | ||
386 | |||
387 | |||
388 | /** | ||
389 | * whcrc_stop_rc - stop a WHCI radio controller | ||
390 | * @whcrc: the radio controller to stop | ||
391 | * | ||
392 | * Disable interrupts and cancel any pending event processing work | ||
393 | * before clearing the Run/Stop bit. | ||
394 | */ | ||
395 | static | ||
396 | void whcrc_stop_rc(struct uwb_rc *rc) | ||
397 | { | ||
398 | struct whcrc *whcrc = rc->priv; | ||
399 | struct umc_dev *umc_dev = whcrc->umc_dev; | ||
400 | |||
401 | le_writel(0, whcrc->rc_base + URCINTR); | ||
402 | cancel_work_sync(&whcrc->event_work); | ||
403 | |||
404 | le_writel(0, whcrc->rc_base + URCCMD); | ||
405 | whci_wait_for(&umc_dev->dev, whcrc->rc_base + URCSTS, | ||
406 | URCSTS_HALTED, 0, 40, "URCSTS.HALTED"); | ||
407 | } | ||
408 | |||
409 | static void whcrc_init(struct whcrc *whcrc) | ||
410 | { | ||
411 | spin_lock_init(&whcrc->irq_lock); | ||
412 | init_waitqueue_head(&whcrc->cmd_wq); | ||
413 | INIT_WORK(&whcrc->event_work, whcrc_event_work); | ||
414 | } | ||
415 | |||
416 | /** | ||
417 | * Initialize the radio controller. | ||
418 | * | ||
419 | * NOTE: we setup whcrc->uwb_rc before calling uwb_rc_add(); in the | ||
420 | * IRQ handler we use that to determine if the hw is ready to | ||
421 | * handle events. Looks like a race condition, but it really is | ||
422 | * not. | ||
423 | */ | ||
424 | static | ||
425 | int whcrc_probe(struct umc_dev *umc_dev) | ||
426 | { | ||
427 | int result; | ||
428 | struct uwb_rc *uwb_rc; | ||
429 | struct whcrc *whcrc; | ||
430 | struct device *dev = &umc_dev->dev; | ||
431 | |||
432 | d_fnstart(3, dev, "(umc_dev %p)\n", umc_dev); | ||
433 | result = -ENOMEM; | ||
434 | uwb_rc = uwb_rc_alloc(); | ||
435 | if (uwb_rc == NULL) { | ||
436 | dev_err(dev, "unable to allocate RC instance\n"); | ||
437 | goto error_rc_alloc; | ||
438 | } | ||
439 | whcrc = kzalloc(sizeof(*whcrc), GFP_KERNEL); | ||
440 | if (whcrc == NULL) { | ||
441 | dev_err(dev, "unable to allocate WHC-RC instance\n"); | ||
442 | goto error_alloc; | ||
443 | } | ||
444 | whcrc_init(whcrc); | ||
445 | whcrc->umc_dev = umc_dev; | ||
446 | |||
447 | result = whcrc_setup_rc_umc(whcrc); | ||
448 | if (result < 0) { | ||
449 | dev_err(dev, "Can't setup RC UMC interface: %d\n", result); | ||
450 | goto error_setup_rc_umc; | ||
451 | } | ||
452 | whcrc->uwb_rc = uwb_rc; | ||
453 | |||
454 | uwb_rc->owner = THIS_MODULE; | ||
455 | uwb_rc->cmd = whcrc_cmd; | ||
456 | uwb_rc->reset = whcrc_reset; | ||
457 | uwb_rc->start = whcrc_start_rc; | ||
458 | uwb_rc->stop = whcrc_stop_rc; | ||
459 | |||
460 | result = uwb_rc_add(uwb_rc, dev, whcrc); | ||
461 | if (result < 0) | ||
462 | goto error_rc_add; | ||
463 | umc_set_drvdata(umc_dev, whcrc); | ||
464 | d_fnend(3, dev, "(umc_dev %p) = 0\n", umc_dev); | ||
465 | return 0; | ||
466 | |||
467 | error_rc_add: | ||
468 | whcrc_release_rc_umc(whcrc); | ||
469 | error_setup_rc_umc: | ||
470 | kfree(whcrc); | ||
471 | error_alloc: | ||
472 | uwb_rc_put(uwb_rc); | ||
473 | error_rc_alloc: | ||
474 | d_fnend(3, dev, "(umc_dev %p) = %d\n", umc_dev, result); | ||
475 | return result; | ||
476 | } | ||
477 | |||
478 | /** | ||
479 | * Clean up the radio control resources | ||
480 | * | ||
481 | * When we up the command semaphore, everybody possibly held trying to | ||
482 | * execute a command should be granted entry and then they'll see the | ||
483 | * host is quiescing and up it (so it will chain to the next waiter). | ||
484 | * This should not happen (in any case), as we can only remove when | ||
485 | * there are no handles open... | ||
486 | */ | ||
487 | static void whcrc_remove(struct umc_dev *umc_dev) | ||
488 | { | ||
489 | struct whcrc *whcrc = umc_get_drvdata(umc_dev); | ||
490 | struct uwb_rc *uwb_rc = whcrc->uwb_rc; | ||
491 | |||
492 | umc_set_drvdata(umc_dev, NULL); | ||
493 | uwb_rc_rm(uwb_rc); | ||
494 | whcrc_release_rc_umc(whcrc); | ||
495 | kfree(whcrc); | ||
496 | uwb_rc_put(uwb_rc); | ||
497 | d_printf(1, &umc_dev->dev, "freed whcrc %p\n", whcrc); | ||
498 | } | ||
499 | |||
500 | /* PCI device ID's that we handle [so it gets loaded] */ | ||
501 | static struct pci_device_id whcrc_id_table[] = { | ||
502 | { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, | ||
503 | { /* empty last entry */ } | ||
504 | }; | ||
505 | MODULE_DEVICE_TABLE(pci, whcrc_id_table); | ||
506 | |||
507 | static struct umc_driver whcrc_driver = { | ||
508 | .name = "whc-rc", | ||
509 | .cap_id = UMC_CAP_ID_WHCI_RC, | ||
510 | .probe = whcrc_probe, | ||
511 | .remove = whcrc_remove, | ||
512 | }; | ||
513 | |||
514 | static int __init whcrc_driver_init(void) | ||
515 | { | ||
516 | return umc_driver_register(&whcrc_driver); | ||
517 | } | ||
518 | module_init(whcrc_driver_init); | ||
519 | |||
520 | static void __exit whcrc_driver_exit(void) | ||
521 | { | ||
522 | umc_driver_unregister(&whcrc_driver); | ||
523 | } | ||
524 | module_exit(whcrc_driver_exit); | ||
525 | |||
526 | MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); | ||
527 | MODULE_DESCRIPTION("Wireless Host Controller Radio Control Driver"); | ||
528 | MODULE_LICENSE("GPL"); | ||