diff options
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/chipidea/udc.c | 4 | ||||
-rw-r--r-- | drivers/usb/gadget/bcm63xx_udc.c | 58 | ||||
-rw-r--r-- | drivers/usb/gadget/f_fs.c | 7 | ||||
-rw-r--r-- | drivers/usb/gadget/printer.c | 2 | ||||
-rw-r--r-- | drivers/usb/gadget/s3c2410_udc.c | 2 | ||||
-rw-r--r-- | drivers/usb/host/ehci-hub.c | 26 | ||||
-rw-r--r-- | drivers/usb/musb/musb_core.c | 15 | ||||
-rw-r--r-- | drivers/usb/musb/musb_host.c | 3 | ||||
-rw-r--r-- | drivers/usb/musb/musb_virthub.c | 26 | ||||
-rw-r--r-- | drivers/usb/musb/omap2430.c | 2 | ||||
-rw-r--r-- | drivers/usb/phy/phy-msm-usb.c | 57 | ||||
-rw-r--r-- | drivers/usb/serial/option.c | 3 |
12 files changed, 127 insertions, 78 deletions
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 80de2f88ed2c..4ab2cb62dfce 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c | |||
@@ -105,7 +105,7 @@ static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir) | |||
105 | 105 | ||
106 | do { | 106 | do { |
107 | /* flush any pending transfer */ | 107 | /* flush any pending transfer */ |
108 | hw_write(ci, OP_ENDPTFLUSH, BIT(n), BIT(n)); | 108 | hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n)); |
109 | while (hw_read(ci, OP_ENDPTFLUSH, BIT(n))) | 109 | while (hw_read(ci, OP_ENDPTFLUSH, BIT(n))) |
110 | cpu_relax(); | 110 | cpu_relax(); |
111 | } while (hw_read(ci, OP_ENDPTSTAT, BIT(n))); | 111 | } while (hw_read(ci, OP_ENDPTSTAT, BIT(n))); |
@@ -205,7 +205,7 @@ static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl) | |||
205 | if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) | 205 | if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) |
206 | return -EAGAIN; | 206 | return -EAGAIN; |
207 | 207 | ||
208 | hw_write(ci, OP_ENDPTPRIME, BIT(n), BIT(n)); | 208 | hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n)); |
209 | 209 | ||
210 | while (hw_read(ci, OP_ENDPTPRIME, BIT(n))) | 210 | while (hw_read(ci, OP_ENDPTPRIME, BIT(n))) |
211 | cpu_relax(); | 211 | cpu_relax(); |
diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c index 888fbb43b338..e969eb809a85 100644 --- a/drivers/usb/gadget/bcm63xx_udc.c +++ b/drivers/usb/gadget/bcm63xx_udc.c | |||
@@ -360,24 +360,30 @@ static inline void usb_dma_writel(struct bcm63xx_udc *udc, u32 val, u32 off) | |||
360 | bcm_writel(val, udc->iudma_regs + off); | 360 | bcm_writel(val, udc->iudma_regs + off); |
361 | } | 361 | } |
362 | 362 | ||
363 | static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off) | 363 | static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan) |
364 | { | 364 | { |
365 | return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off); | 365 | return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off + |
366 | (ENETDMA_CHAN_WIDTH * chan)); | ||
366 | } | 367 | } |
367 | 368 | ||
368 | static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off) | 369 | static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off, |
370 | int chan) | ||
369 | { | 371 | { |
370 | bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off); | 372 | bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off + |
373 | (ENETDMA_CHAN_WIDTH * chan)); | ||
371 | } | 374 | } |
372 | 375 | ||
373 | static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off) | 376 | static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan) |
374 | { | 377 | { |
375 | return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off); | 378 | return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off + |
379 | (ENETDMA_CHAN_WIDTH * chan)); | ||
376 | } | 380 | } |
377 | 381 | ||
378 | static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off) | 382 | static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off, |
383 | int chan) | ||
379 | { | 384 | { |
380 | bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off); | 385 | bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off + |
386 | (ENETDMA_CHAN_WIDTH * chan)); | ||
381 | } | 387 | } |
382 | 388 | ||
383 | static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled) | 389 | static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled) |
@@ -638,7 +644,7 @@ static void iudma_write(struct bcm63xx_udc *udc, struct iudma_ch *iudma, | |||
638 | } while (!last_bd); | 644 | } while (!last_bd); |
639 | 645 | ||
640 | usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK, | 646 | usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK, |
641 | ENETDMAC_CHANCFG_REG(iudma->ch_idx)); | 647 | ENETDMAC_CHANCFG_REG, iudma->ch_idx); |
642 | } | 648 | } |
643 | 649 | ||
644 | /** | 650 | /** |
@@ -694,9 +700,9 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) | |||
694 | bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num)); | 700 | bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num)); |
695 | 701 | ||
696 | /* stop DMA, then wait for the hardware to wrap up */ | 702 | /* stop DMA, then wait for the hardware to wrap up */ |
697 | usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx)); | 703 | usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx); |
698 | 704 | ||
699 | while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) & | 705 | while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) & |
700 | ENETDMAC_CHANCFG_EN_MASK) { | 706 | ENETDMAC_CHANCFG_EN_MASK) { |
701 | udelay(1); | 707 | udelay(1); |
702 | 708 | ||
@@ -713,10 +719,10 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) | |||
713 | dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n", | 719 | dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n", |
714 | ch_idx); | 720 | ch_idx); |
715 | usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK, | 721 | usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK, |
716 | ENETDMAC_CHANCFG_REG(ch_idx)); | 722 | ENETDMAC_CHANCFG_REG, ch_idx); |
717 | } | 723 | } |
718 | } | 724 | } |
719 | usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx)); | 725 | usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx); |
720 | 726 | ||
721 | /* don't leave "live" HW-owned entries for the next guy to step on */ | 727 | /* don't leave "live" HW-owned entries for the next guy to step on */ |
722 | for (d = iudma->bd_ring; d <= iudma->end_bd; d++) | 728 | for (d = iudma->bd_ring; d <= iudma->end_bd; d++) |
@@ -728,11 +734,11 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) | |||
728 | 734 | ||
729 | /* set up IRQs, UBUS burst size, and BD base for this channel */ | 735 | /* set up IRQs, UBUS burst size, and BD base for this channel */ |
730 | usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, | 736 | usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, |
731 | ENETDMAC_IRMASK_REG(ch_idx)); | 737 | ENETDMAC_IRMASK_REG, ch_idx); |
732 | usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx)); | 738 | usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx); |
733 | 739 | ||
734 | usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx)); | 740 | usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx); |
735 | usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx)); | 741 | usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx); |
736 | } | 742 | } |
737 | 743 | ||
738 | /** | 744 | /** |
@@ -2035,7 +2041,7 @@ static irqreturn_t bcm63xx_udc_data_isr(int irq, void *dev_id) | |||
2035 | spin_lock(&udc->lock); | 2041 | spin_lock(&udc->lock); |
2036 | 2042 | ||
2037 | usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, | 2043 | usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, |
2038 | ENETDMAC_IR_REG(iudma->ch_idx)); | 2044 | ENETDMAC_IR_REG, iudma->ch_idx); |
2039 | bep = iudma->bep; | 2045 | bep = iudma->bep; |
2040 | rc = iudma_read(udc, iudma); | 2046 | rc = iudma_read(udc, iudma); |
2041 | 2047 | ||
@@ -2175,18 +2181,18 @@ static int bcm63xx_iudma_dbg_show(struct seq_file *s, void *p) | |||
2175 | seq_printf(s, " [ep%d]:\n", | 2181 | seq_printf(s, " [ep%d]:\n", |
2176 | max_t(int, iudma_defaults[ch_idx].ep_num, 0)); | 2182 | max_t(int, iudma_defaults[ch_idx].ep_num, 0)); |
2177 | seq_printf(s, " cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n", | 2183 | seq_printf(s, " cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n", |
2178 | usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)), | 2184 | usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx), |
2179 | usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)), | 2185 | usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx), |
2180 | usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)), | 2186 | usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx), |
2181 | usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx))); | 2187 | usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx)); |
2182 | 2188 | ||
2183 | sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx)); | 2189 | sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx); |
2184 | sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx)); | 2190 | sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx); |
2185 | seq_printf(s, " base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n", | 2191 | seq_printf(s, " base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n", |
2186 | usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)), | 2192 | usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx), |
2187 | sram2 >> 16, sram2 & 0xffff, | 2193 | sram2 >> 16, sram2 & 0xffff, |
2188 | sram3 >> 16, sram3 & 0xffff, | 2194 | sram3 >> 16, sram3 & 0xffff, |
2189 | usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx))); | 2195 | usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx)); |
2190 | seq_printf(s, " desc: %d/%d used", iudma->n_bds_used, | 2196 | seq_printf(s, " desc: %d/%d used", iudma->n_bds_used, |
2191 | iudma->n_bds); | 2197 | iudma->n_bds); |
2192 | 2198 | ||
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 306a2b52125c..2b4334394076 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c | |||
@@ -585,7 +585,6 @@ static ssize_t ffs_epfile_io(struct file *file, | |||
585 | char __user *buf, size_t len, int read) | 585 | char __user *buf, size_t len, int read) |
586 | { | 586 | { |
587 | struct ffs_epfile *epfile = file->private_data; | 587 | struct ffs_epfile *epfile = file->private_data; |
588 | struct usb_gadget *gadget = epfile->ffs->gadget; | ||
589 | struct ffs_ep *ep; | 588 | struct ffs_ep *ep; |
590 | char *data = NULL; | 589 | char *data = NULL; |
591 | ssize_t ret, data_len; | 590 | ssize_t ret, data_len; |
@@ -622,6 +621,12 @@ static ssize_t ffs_epfile_io(struct file *file, | |||
622 | /* Allocate & copy */ | 621 | /* Allocate & copy */ |
623 | if (!halt) { | 622 | if (!halt) { |
624 | /* | 623 | /* |
624 | * if we _do_ wait above, the epfile->ffs->gadget might be NULL | ||
625 | * before the waiting completes, so do not assign to 'gadget' earlier | ||
626 | */ | ||
627 | struct usb_gadget *gadget = epfile->ffs->gadget; | ||
628 | |||
629 | /* | ||
625 | * Controller may require buffer size to be aligned to | 630 | * Controller may require buffer size to be aligned to |
626 | * maxpacketsize of an out endpoint. | 631 | * maxpacketsize of an out endpoint. |
627 | */ | 632 | */ |
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index bf7a56b6d48a..69b76efd11e9 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c | |||
@@ -1157,7 +1157,7 @@ static int __init printer_bind_config(struct usb_configuration *c) | |||
1157 | 1157 | ||
1158 | usb_gadget_set_selfpowered(gadget); | 1158 | usb_gadget_set_selfpowered(gadget); |
1159 | 1159 | ||
1160 | if (gadget->is_otg) { | 1160 | if (gadget_is_otg(gadget)) { |
1161 | otg_descriptor.bmAttributes |= USB_OTG_HNP; | 1161 | otg_descriptor.bmAttributes |= USB_OTG_HNP; |
1162 | printer_cfg_driver.descriptors = otg_desc; | 1162 | printer_cfg_driver.descriptors = otg_desc; |
1163 | printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; | 1163 | printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; |
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index f04b2c3154de..dd9678f85c58 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c | |||
@@ -1629,7 +1629,7 @@ static void s3c2410_udc_reinit(struct s3c2410_udc *dev) | |||
1629 | ep->ep.desc = NULL; | 1629 | ep->ep.desc = NULL; |
1630 | ep->halted = 0; | 1630 | ep->halted = 0; |
1631 | INIT_LIST_HEAD(&ep->queue); | 1631 | INIT_LIST_HEAD(&ep->queue); |
1632 | usb_ep_set_maxpacket_limit(&ep->ep, &ep->ep.maxpacket); | 1632 | usb_ep_set_maxpacket_limit(&ep->ep, ep->ep.maxpacket); |
1633 | } | 1633 | } |
1634 | } | 1634 | } |
1635 | 1635 | ||
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 47b858fc50b2..7ae0c4d51741 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c | |||
@@ -238,6 +238,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) | |||
238 | int port; | 238 | int port; |
239 | int mask; | 239 | int mask; |
240 | int changed; | 240 | int changed; |
241 | bool fs_idle_delay; | ||
241 | 242 | ||
242 | ehci_dbg(ehci, "suspend root hub\n"); | 243 | ehci_dbg(ehci, "suspend root hub\n"); |
243 | 244 | ||
@@ -272,6 +273,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) | |||
272 | ehci->bus_suspended = 0; | 273 | ehci->bus_suspended = 0; |
273 | ehci->owned_ports = 0; | 274 | ehci->owned_ports = 0; |
274 | changed = 0; | 275 | changed = 0; |
276 | fs_idle_delay = false; | ||
275 | port = HCS_N_PORTS(ehci->hcs_params); | 277 | port = HCS_N_PORTS(ehci->hcs_params); |
276 | while (port--) { | 278 | while (port--) { |
277 | u32 __iomem *reg = &ehci->regs->port_status [port]; | 279 | u32 __iomem *reg = &ehci->regs->port_status [port]; |
@@ -300,16 +302,32 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) | |||
300 | } | 302 | } |
301 | 303 | ||
302 | if (t1 != t2) { | 304 | if (t1 != t2) { |
305 | /* | ||
306 | * On some controllers, Wake-On-Disconnect will | ||
307 | * generate false wakeup signals until the bus | ||
308 | * switches over to full-speed idle. For their | ||
309 | * sake, add a delay if we need one. | ||
310 | */ | ||
311 | if ((t2 & PORT_WKDISC_E) && | ||
312 | ehci_port_speed(ehci, t2) == | ||
313 | USB_PORT_STAT_HIGH_SPEED) | ||
314 | fs_idle_delay = true; | ||
303 | ehci_writel(ehci, t2, reg); | 315 | ehci_writel(ehci, t2, reg); |
304 | changed = 1; | 316 | changed = 1; |
305 | } | 317 | } |
306 | } | 318 | } |
319 | spin_unlock_irq(&ehci->lock); | ||
320 | |||
321 | if ((changed && ehci->has_tdi_phy_lpm) || fs_idle_delay) { | ||
322 | /* | ||
323 | * Wait for HCD to enter low-power mode or for the bus | ||
324 | * to switch to full-speed idle. | ||
325 | */ | ||
326 | usleep_range(5000, 5500); | ||
327 | } | ||
307 | 328 | ||
308 | if (changed && ehci->has_tdi_phy_lpm) { | 329 | if (changed && ehci->has_tdi_phy_lpm) { |
309 | spin_unlock_irq(&ehci->lock); | ||
310 | msleep(5); /* 5 ms for HCD to enter low-power mode */ | ||
311 | spin_lock_irq(&ehci->lock); | 330 | spin_lock_irq(&ehci->lock); |
312 | |||
313 | port = HCS_N_PORTS(ehci->hcs_params); | 331 | port = HCS_N_PORTS(ehci->hcs_params); |
314 | while (port--) { | 332 | while (port--) { |
315 | u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port]; | 333 | u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port]; |
@@ -322,8 +340,8 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) | |||
322 | port, (t3 & HOSTPC_PHCD) ? | 340 | port, (t3 & HOSTPC_PHCD) ? |
323 | "succeeded" : "failed"); | 341 | "succeeded" : "failed"); |
324 | } | 342 | } |
343 | spin_unlock_irq(&ehci->lock); | ||
325 | } | 344 | } |
326 | spin_unlock_irq(&ehci->lock); | ||
327 | 345 | ||
328 | /* Apparently some devices need a >= 1-uframe delay here */ | 346 | /* Apparently some devices need a >= 1-uframe delay here */ |
329 | if (ehci->bus_suspended) | 347 | if (ehci->bus_suspended) |
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index fc192ad9cc6a..239ad0b1ceb6 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c | |||
@@ -477,8 +477,11 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, | |||
477 | musb->port1_status |= | 477 | musb->port1_status |= |
478 | (USB_PORT_STAT_C_SUSPEND << 16) | 478 | (USB_PORT_STAT_C_SUSPEND << 16) |
479 | | MUSB_PORT_STAT_RESUME; | 479 | | MUSB_PORT_STAT_RESUME; |
480 | musb->rh_timer = jiffies | ||
481 | + msecs_to_jiffies(20); | ||
480 | schedule_delayed_work( | 482 | schedule_delayed_work( |
481 | &musb->finish_resume_work, 20); | 483 | &musb->finish_resume_work, |
484 | msecs_to_jiffies(20)); | ||
482 | 485 | ||
483 | musb->xceiv->state = OTG_STATE_A_HOST; | 486 | musb->xceiv->state = OTG_STATE_A_HOST; |
484 | musb->is_active = 1; | 487 | musb->is_active = 1; |
@@ -2157,11 +2160,19 @@ static void musb_restore_context(struct musb *musb) | |||
2157 | void __iomem *musb_base = musb->mregs; | 2160 | void __iomem *musb_base = musb->mregs; |
2158 | void __iomem *ep_target_regs; | 2161 | void __iomem *ep_target_regs; |
2159 | void __iomem *epio; | 2162 | void __iomem *epio; |
2163 | u8 power; | ||
2160 | 2164 | ||
2161 | musb_writew(musb_base, MUSB_FRAME, musb->context.frame); | 2165 | musb_writew(musb_base, MUSB_FRAME, musb->context.frame); |
2162 | musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); | 2166 | musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); |
2163 | musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); | 2167 | musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); |
2164 | musb_writeb(musb_base, MUSB_POWER, musb->context.power); | 2168 | |
2169 | /* Don't affect SUSPENDM/RESUME bits in POWER reg */ | ||
2170 | power = musb_readb(musb_base, MUSB_POWER); | ||
2171 | power &= MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME; | ||
2172 | musb->context.power &= ~(MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME); | ||
2173 | power |= musb->context.power; | ||
2174 | musb_writeb(musb_base, MUSB_POWER, power); | ||
2175 | |||
2165 | musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe); | 2176 | musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe); |
2166 | musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe); | 2177 | musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe); |
2167 | musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe); | 2178 | musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe); |
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index ed455724017b..abb38c3833ef 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c | |||
@@ -1183,6 +1183,9 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) | |||
1183 | csr = MUSB_CSR0_H_STATUSPKT | 1183 | csr = MUSB_CSR0_H_STATUSPKT |
1184 | | MUSB_CSR0_TXPKTRDY; | 1184 | | MUSB_CSR0_TXPKTRDY; |
1185 | 1185 | ||
1186 | /* disable ping token in status phase */ | ||
1187 | csr |= MUSB_CSR0_H_DIS_PING; | ||
1188 | |||
1186 | /* flag status stage */ | 1189 | /* flag status stage */ |
1187 | musb->ep0_stage = MUSB_EP0_STATUS; | 1190 | musb->ep0_stage = MUSB_EP0_STATUS; |
1188 | 1191 | ||
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index eb634433ef09..e2d2d8c9891b 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c | |||
@@ -135,7 +135,8 @@ void musb_port_suspend(struct musb *musb, bool do_suspend) | |||
135 | 135 | ||
136 | /* later, GetPortStatus will stop RESUME signaling */ | 136 | /* later, GetPortStatus will stop RESUME signaling */ |
137 | musb->port1_status |= MUSB_PORT_STAT_RESUME; | 137 | musb->port1_status |= MUSB_PORT_STAT_RESUME; |
138 | schedule_delayed_work(&musb->finish_resume_work, 20); | 138 | schedule_delayed_work(&musb->finish_resume_work, |
139 | msecs_to_jiffies(20)); | ||
139 | } | 140 | } |
140 | } | 141 | } |
141 | 142 | ||
@@ -158,7 +159,6 @@ void musb_port_reset(struct musb *musb, bool do_reset) | |||
158 | */ | 159 | */ |
159 | power = musb_readb(mbase, MUSB_POWER); | 160 | power = musb_readb(mbase, MUSB_POWER); |
160 | if (do_reset) { | 161 | if (do_reset) { |
161 | |||
162 | /* | 162 | /* |
163 | * If RESUME is set, we must make sure it stays minimum 20 ms. | 163 | * If RESUME is set, we must make sure it stays minimum 20 ms. |
164 | * Then we must clear RESUME and wait a bit to let musb start | 164 | * Then we must clear RESUME and wait a bit to let musb start |
@@ -167,11 +167,22 @@ void musb_port_reset(struct musb *musb, bool do_reset) | |||
167 | * detected". | 167 | * detected". |
168 | */ | 168 | */ |
169 | if (power & MUSB_POWER_RESUME) { | 169 | if (power & MUSB_POWER_RESUME) { |
170 | while (time_before(jiffies, musb->rh_timer)) | 170 | long remain = (unsigned long) musb->rh_timer - jiffies; |
171 | msleep(1); | 171 | |
172 | if (musb->rh_timer > 0 && remain > 0) { | ||
173 | /* take into account the minimum delay after resume */ | ||
174 | schedule_delayed_work( | ||
175 | &musb->deassert_reset_work, remain); | ||
176 | return; | ||
177 | } | ||
178 | |||
172 | musb_writeb(mbase, MUSB_POWER, | 179 | musb_writeb(mbase, MUSB_POWER, |
173 | power & ~MUSB_POWER_RESUME); | 180 | power & ~MUSB_POWER_RESUME); |
174 | msleep(1); | 181 | |
182 | /* Give the core 1 ms to clear MUSB_POWER_RESUME */ | ||
183 | schedule_delayed_work(&musb->deassert_reset_work, | ||
184 | msecs_to_jiffies(1)); | ||
185 | return; | ||
175 | } | 186 | } |
176 | 187 | ||
177 | power &= 0xf0; | 188 | power &= 0xf0; |
@@ -180,7 +191,8 @@ void musb_port_reset(struct musb *musb, bool do_reset) | |||
180 | 191 | ||
181 | musb->port1_status |= USB_PORT_STAT_RESET; | 192 | musb->port1_status |= USB_PORT_STAT_RESET; |
182 | musb->port1_status &= ~USB_PORT_STAT_ENABLE; | 193 | musb->port1_status &= ~USB_PORT_STAT_ENABLE; |
183 | schedule_delayed_work(&musb->deassert_reset_work, 50); | 194 | schedule_delayed_work(&musb->deassert_reset_work, |
195 | msecs_to_jiffies(50)); | ||
184 | } else { | 196 | } else { |
185 | dev_dbg(musb->controller, "root port reset stopped\n"); | 197 | dev_dbg(musb->controller, "root port reset stopped\n"); |
186 | musb_writeb(mbase, MUSB_POWER, | 198 | musb_writeb(mbase, MUSB_POWER, |
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 2a408cdaf7b2..8aa59a2c5eb2 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c | |||
@@ -659,7 +659,6 @@ static int omap2430_runtime_suspend(struct device *dev) | |||
659 | OTG_INTERFSEL); | 659 | OTG_INTERFSEL); |
660 | 660 | ||
661 | omap2430_low_level_exit(musb); | 661 | omap2430_low_level_exit(musb); |
662 | phy_power_off(musb->phy); | ||
663 | } | 662 | } |
664 | 663 | ||
665 | return 0; | 664 | return 0; |
@@ -674,7 +673,6 @@ static int omap2430_runtime_resume(struct device *dev) | |||
674 | omap2430_low_level_init(musb); | 673 | omap2430_low_level_init(musb); |
675 | musb_writel(musb->mregs, OTG_INTERFSEL, | 674 | musb_writel(musb->mregs, OTG_INTERFSEL, |
676 | musb->context.otg_interfsel); | 675 | musb->context.otg_interfsel); |
677 | phy_power_on(musb->phy); | ||
678 | } | 676 | } |
679 | 677 | ||
680 | return 0; | 678 | return 0; |
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 8546c8dccd51..d204f745ed05 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c | |||
@@ -159,32 +159,6 @@ put_3p3: | |||
159 | return rc; | 159 | return rc; |
160 | } | 160 | } |
161 | 161 | ||
162 | #ifdef CONFIG_PM_SLEEP | ||
163 | #define USB_PHY_SUSP_DIG_VOL 500000 | ||
164 | static int msm_hsusb_config_vddcx(int high) | ||
165 | { | ||
166 | int max_vol = USB_PHY_VDD_DIG_VOL_MAX; | ||
167 | int min_vol; | ||
168 | int ret; | ||
169 | |||
170 | if (high) | ||
171 | min_vol = USB_PHY_VDD_DIG_VOL_MIN; | ||
172 | else | ||
173 | min_vol = USB_PHY_SUSP_DIG_VOL; | ||
174 | |||
175 | ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol); | ||
176 | if (ret) { | ||
177 | pr_err("%s: unable to set the voltage for regulator " | ||
178 | "HSUSB_VDDCX\n", __func__); | ||
179 | return ret; | ||
180 | } | ||
181 | |||
182 | pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol); | ||
183 | |||
184 | return ret; | ||
185 | } | ||
186 | #endif | ||
187 | |||
188 | static int msm_hsusb_ldo_set_mode(int on) | 162 | static int msm_hsusb_ldo_set_mode(int on) |
189 | { | 163 | { |
190 | int ret = 0; | 164 | int ret = 0; |
@@ -440,7 +414,32 @@ static int msm_otg_reset(struct usb_phy *phy) | |||
440 | #define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000) | 414 | #define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000) |
441 | #define PHY_RESUME_TIMEOUT_USEC (100 * 1000) | 415 | #define PHY_RESUME_TIMEOUT_USEC (100 * 1000) |
442 | 416 | ||
443 | #ifdef CONFIG_PM_SLEEP | 417 | #ifdef CONFIG_PM |
418 | |||
419 | #define USB_PHY_SUSP_DIG_VOL 500000 | ||
420 | static int msm_hsusb_config_vddcx(int high) | ||
421 | { | ||
422 | int max_vol = USB_PHY_VDD_DIG_VOL_MAX; | ||
423 | int min_vol; | ||
424 | int ret; | ||
425 | |||
426 | if (high) | ||
427 | min_vol = USB_PHY_VDD_DIG_VOL_MIN; | ||
428 | else | ||
429 | min_vol = USB_PHY_SUSP_DIG_VOL; | ||
430 | |||
431 | ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol); | ||
432 | if (ret) { | ||
433 | pr_err("%s: unable to set the voltage for regulator " | ||
434 | "HSUSB_VDDCX\n", __func__); | ||
435 | return ret; | ||
436 | } | ||
437 | |||
438 | pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol); | ||
439 | |||
440 | return ret; | ||
441 | } | ||
442 | |||
444 | static int msm_otg_suspend(struct msm_otg *motg) | 443 | static int msm_otg_suspend(struct msm_otg *motg) |
445 | { | 444 | { |
446 | struct usb_phy *phy = &motg->phy; | 445 | struct usb_phy *phy = &motg->phy; |
@@ -1733,22 +1732,18 @@ static int msm_otg_pm_resume(struct device *dev) | |||
1733 | } | 1732 | } |
1734 | #endif | 1733 | #endif |
1735 | 1734 | ||
1736 | #ifdef CONFIG_PM | ||
1737 | static const struct dev_pm_ops msm_otg_dev_pm_ops = { | 1735 | static const struct dev_pm_ops msm_otg_dev_pm_ops = { |
1738 | SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume) | 1736 | SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume) |
1739 | SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume, | 1737 | SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume, |
1740 | msm_otg_runtime_idle) | 1738 | msm_otg_runtime_idle) |
1741 | }; | 1739 | }; |
1742 | #endif | ||
1743 | 1740 | ||
1744 | static struct platform_driver msm_otg_driver = { | 1741 | static struct platform_driver msm_otg_driver = { |
1745 | .remove = msm_otg_remove, | 1742 | .remove = msm_otg_remove, |
1746 | .driver = { | 1743 | .driver = { |
1747 | .name = DRIVER_NAME, | 1744 | .name = DRIVER_NAME, |
1748 | .owner = THIS_MODULE, | 1745 | .owner = THIS_MODULE, |
1749 | #ifdef CONFIG_PM | ||
1750 | .pm = &msm_otg_dev_pm_ops, | 1746 | .pm = &msm_otg_dev_pm_ops, |
1751 | #endif | ||
1752 | }, | 1747 | }, |
1753 | }; | 1748 | }; |
1754 | 1749 | ||
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 216d20affba8..68fc9fe65936 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c | |||
@@ -1526,7 +1526,8 @@ static const struct usb_device_id option_ids[] = { | |||
1526 | /* Cinterion */ | 1526 | /* Cinterion */ |
1527 | { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) }, | 1527 | { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) }, |
1528 | { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) }, | 1528 | { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) }, |
1529 | { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) }, | 1529 | { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8), |
1530 | .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, | ||
1530 | { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) }, | 1531 | { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) }, |
1531 | { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX), | 1532 | { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX), |
1532 | .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, | 1533 | .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, |