38 files changed, 272 insertions, 109 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index d6ede989ff22..4ab49d4eebf4 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1607,6 +1607,7 @@ static const struct usb_device_id acm_ids[] = {
         { NOKIA_PCSUITE_ACM_INFO(0x0154), }, /* Nokia 5800 XpressMusic */
         { NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */
         { NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */
+        { NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */
         { SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
 
         /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 6a95017fa62b..e935f71d7a34 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1955,7 +1955,6 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 
         dev_dbg(&rhdev->dev, "usb %s%s\n",
                         (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume");
-        clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
         if (!hcd->driver->bus_resume)
                 return -ENOENT;
         if (hcd->state == HC_STATE_RUNNING)
@@ -1963,6 +1962,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 
         hcd->state = HC_STATE_RESUMING;
         status = hcd->driver->bus_resume(hcd);
+        clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
         if (status == 0) {
                 /* TRSMRCY = 10 msec */
                 msleep(10);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 4310cc4b1cb5..0f299b7aad60 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2681,17 +2681,13 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 
         mutex_lock(&usb_address0_mutex);
 
-        if (!udev->config && oldspeed == USB_SPEED_SUPER) {
-                /* Don't reset USB 3.0 devices during an initial setup */
-                usb_set_device_state(udev, USB_STATE_DEFAULT);
-        } else {
-                /* Reset the device; full speed may morph to high speed */
-                /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
-                retval = hub_port_reset(hub, port1, udev, delay);
-                if (retval < 0)         /* error or disconnect */
-                        goto fail;
-                /* success, speed is known */
-        }
+        /* Reset the device; full speed may morph to high speed */
+        /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
+        retval = hub_port_reset(hub, port1, udev, delay);
+        if (retval < 0)         /* error or disconnect */
+                goto fail;
+        /* success, speed is known */
+
         retval = -ENODEV;
 
         if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) {
@@ -2753,6 +2749,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
                 udev->ttport = hdev->ttport;
         } else if (udev->speed != USB_SPEED_HIGH
                         && hdev->speed == USB_SPEED_HIGH) {
+                if (!hub->tt.hub) {
+                        dev_err(&udev->dev, "parent hub has no TT\n");
+                        retval = -EINVAL;
+                        goto fail;
+                }
                 udev->tt = &hub->tt;
                 udev->ttport = port1;
         }
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 44c595432d6f..81ce6a8e1d94 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -48,6 +48,10 @@ static const struct usb_device_id usb_quirk_list[] = {
         { USB_DEVICE(0x04b4, 0x0526), .driver_info =
                         USB_QUIRK_CONFIG_INTF_STRINGS },
 
+        /* Samsung Android phone modem - ID conflict with SPH-I500 */
+        { USB_DEVICE(0x04e8, 0x6601), .driver_info =
+                        USB_QUIRK_CONFIG_INTF_STRINGS },
+
         /* Roland SC-8820 */
         { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -68,6 +72,10 @@ static const struct usb_device_id usb_quirk_list[] = {
         /* M-Systems Flash Disk Pioneers */
         { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
+        /* Keytouch QWERTY Panel keyboard */
+        { USB_DEVICE(0x0926, 0x3333), .driver_info =
+                        USB_QUIRK_CONFIG_INTF_STRINGS },
+
         /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
         { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 06bb9d4587e9..d50099675f28 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -546,6 +546,8 @@ config USB_GADGET_CI13XXX_MSM
           ci13xxx_udc core.
           This driver depends on OTG driver for PHY initialization,
           clock management, powering up VBUS, and power management.
+          This driver is not supported on boards like trout which
+          has an external PHY.
 
           Say "y" to link the driver statically, or "m" to build a
           dynamically linked module called "ci13xxx_msm" and force all
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index b5dbb2308f56..6d8e533949eb 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -293,6 +293,7 @@
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/composite.h>
 
 #include "gadget_chips.h"
 
@@ -2763,7 +2764,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
                         return ERR_PTR(-ENOMEM);
                 common->free_storage_on_release = 1;
         } else {
-                memset(common, 0, sizeof common);
+                memset(common, 0, sizeof *common);
                 common->free_storage_on_release = 0;
         }
 
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index 3c6e1a058745..5e1495097ec3 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -346,14 +346,19 @@ static void pn_rx_complete(struct usb_ep *ep, struct usb_request *req)
 
                 if (unlikely(!skb))
                         break;
-                skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, 0,
-                                req->actual);
-                page = NULL;
 
-                if (req->actual < req->length) { /* Last fragment */
+                if (skb->len == 0) { /* First fragment */
                         skb->protocol = htons(ETH_P_PHONET);
                         skb_reset_mac_header(skb);
-                        pskb_pull(skb, 1);
+                        /* Can't use pskb_pull() on page in IRQ */
+                        memcpy(skb_put(skb, 1), page_address(page), 1);
+                }
+
+                skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
+                                skb->len == 0, req->actual);
+                page = NULL;
+
+                if (req->actual < req->length) { /* Last fragment */
                         skb->dev = dev;
                         dev->stats.rx_packets++;
                         dev->stats.rx_bytes += skb->len;
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 20d43da319ae..015118535f77 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -258,7 +258,7 @@ static int pipe_buffer_setting(struct r8a66597 *r8a66597,
                 break;
         case R8A66597_BULK:
                 /* isochronous pipes may be used as bulk pipes */
-                if (info->pipe > R8A66597_BASE_PIPENUM_BULK)
+                if (info->pipe >= R8A66597_BASE_PIPENUM_BULK)
                         bufnum = info->pipe - R8A66597_BASE_PIPENUM_BULK;
                 else
                         bufnum = info->pipe - R8A66597_BASE_PIPENUM_ISOC;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 24046c0f5878..0e6afa260ed8 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -151,6 +151,8 @@ config USB_EHCI_MSM
           Qualcomm chipsets. Root Hub has inbuilt TT.
           This driver depends on OTG driver for PHY initialization,
           clock management, powering up VBUS, and power management.
+          This driver is not supported on boards like trout which
+          has an external PHY.
 
 config USB_EHCI_HCD_PPC_OF
         bool "EHCI support for PPC USB controller on OF platform bus"
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 2baf8a849086..a869e3c103d3 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -227,8 +227,8 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
          * mark HW unaccessible.  The PM and USB cores make sure that
          * the root hub is either suspended or stopped.
          */
-        spin_lock_irqsave(&ehci->lock, flags);
         ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
+        spin_lock_irqsave(&ehci->lock, flags);
         ehci_writel(ehci, 0, &ehci->regs->intr_enable);
         (void)ehci_readl(ehci, &ehci->regs->intr_enable);
 
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 796ea0c8900f..8a515f0d5988 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -111,6 +111,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 {
         int             port;
         u32             temp;
+        unsigned long   flags;
 
         /* If remote wakeup is enabled for the root hub but disabled
          * for the controller, we must adjust all the port wakeup flags
@@ -120,6 +121,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
         if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
                 return;
 
+        spin_lock_irqsave(&ehci->lock, flags);
+
         /* clear phy low-power mode before changing wakeup flags */
         if (ehci->has_hostpc) {
                 port = HCS_N_PORTS(ehci->hcs_params);
@@ -131,7 +134,9 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
                         temp = ehci_readl(ehci, hostpc_reg);
                         ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
                 }
+                spin_unlock_irqrestore(&ehci->lock, flags);
                 msleep(5);
+                spin_lock_irqsave(&ehci->lock, flags);
         }
 
         port = HCS_N_PORTS(ehci->hcs_params);
@@ -170,6 +175,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
         /* Does the root hub have a port wakeup pending? */
         if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD))
                 usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
+
+        spin_unlock_irqrestore(&ehci->lock, flags);
 }
 
 static int ehci_bus_suspend (struct usb_hcd *hcd)
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 680f2ef4e59f..f784ceb862a3 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -796,7 +796,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
         hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev,
                         dev_name(&pdev->dev));
         if (!hcd) {
-                dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret);
+                dev_err(&pdev->dev, "failed to create hcd with err %d\n", ret);
                 ret = -ENOMEM;
                 goto err_create_hcd;
         }
@@ -864,7 +864,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 
         ret = omap_start_ehc(omap, hcd);
         if (ret) {
-                dev_dbg(&pdev->dev, "failed to start ehci\n");
+                dev_err(&pdev->dev, "failed to start ehci with err %d\n", ret);
                 goto err_start;
         }
 
@@ -879,7 +879,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 
         ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
         if (ret) {
-                dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
+                dev_err(&pdev->dev, "failed to add hcd with err %d\n", ret);
                 goto err_add_hcd;
         }
 
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index bed07d4aab06..07bb982e59f6 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -367,8 +367,8 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
          * mark HW unaccessible.  The PM and USB cores make sure that
          * the root hub is either suspended or stopped.
          */
-        spin_lock_irqsave (&ehci->lock, flags);
         ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
+        spin_lock_irqsave (&ehci->lock, flags);
         ehci_writel(ehci, 0, &ehci->regs->intr_enable);
         (void)ehci_readl(ehci, &ehci->regs->intr_enable);
 
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index e8f4f36fdf0b..a6f21b891f68 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -29,6 +29,7 @@
 
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/of_address.h>
 
 /**
  * ehci_xilinx_of_setup - Initialize the device for ehci_reset()
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 990f06b89eaa..2e9602a10e9b 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -861,6 +861,7 @@ static int sl811h_urb_enqueue(
                         DBG("dev %d ep%d maxpacket %d\n",
                                 udev->devnum, epnum, ep->maxpacket);
                         retval = -EINVAL;
+                        kfree(ep);
                         goto fail;
                 }
 
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index fcbf4abbf381..0231814a97a5 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -169,9 +169,10 @@ static void xhci_print_ports(struct xhci_hcd *xhci)
         }
 }
 
-void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num)
+void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num)
 {
-        void *addr;
+        struct xhci_intr_reg __iomem *ir_set = &xhci->run_regs->ir_set[set_num];
+        void __iomem *addr;
         u32 temp;
         u64 temp_64;
 
@@ -449,7 +450,7 @@ char *xhci_get_slot_state(struct xhci_hcd *xhci,
         }
 }
 
-void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
+static void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
 {
         /* Fields are 32 bits wide, DMA addresses are in bytes */
         int field_size = 32 / 8;
@@ -488,7 +489,7 @@ void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
                 dbg_rsvd64(xhci, (u64 *)slot_ctx, dma);
 }
 
-void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
+static void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
                      struct xhci_container_ctx *ctx,
                      unsigned int last_ep)
 {
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 1d0f45f0e7a6..a9534396e85b 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -307,7 +307,7 @@ struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci,
 
 /***************** Streams structures manipulation *************************/
 
-void xhci_free_stream_ctx(struct xhci_hcd *xhci,
+static void xhci_free_stream_ctx(struct xhci_hcd *xhci,
                 unsigned int num_stream_ctxs,
                 struct xhci_stream_ctx *stream_ctx, dma_addr_t dma)
 {
@@ -335,7 +335,7 @@ void xhci_free_stream_ctx(struct xhci_hcd *xhci,
  * The stream context array must be a power of 2, and can be as small as
  * 64 bytes or as large as 1MB.
  */
-struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci,
+static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci,
                 unsigned int num_stream_ctxs, dma_addr_t *dma,
                 gfp_t mem_flags)
 {
@@ -1900,11 +1900,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
         val &= DBOFF_MASK;
         xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x"
                         " from cap regs base addr\n", val);
-        xhci->dba = (void *) xhci->cap_regs + val;
+        xhci->dba = (void __iomem *) xhci->cap_regs + val;
         xhci_dbg_regs(xhci);
         xhci_print_run_regs(xhci);
         /* Set ir_set to interrupt register set 0 */
-        xhci->ir_set = (void *) xhci->run_regs->ir_set;
+        xhci->ir_set = &xhci->run_regs->ir_set[0];
 
         /*
          * Event ring setup: Allocate a normal ring, but also setup
@@ -1961,7 +1961,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
         /* Set the event ring dequeue address */
         xhci_set_hc_event_deq(xhci);
         xhci_dbg(xhci, "Wrote ERST address to ir_set 0.\n");
-        xhci_print_ir_set(xhci, xhci->ir_set, 0);
+        xhci_print_ir_set(xhci, 0);
 
         /*
          * XXX: Might need to set the Interrupter Moderation Register to
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 3e8211c1ce5a..3289bf4832c9 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -474,8 +474,11 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
         state->new_deq_seg = find_trb_seg(cur_td->start_seg,
                         dev->eps[ep_index].stopped_trb,
                         &state->new_cycle_state);
-        if (!state->new_deq_seg)
-                BUG();
+        if (!state->new_deq_seg) {
+                WARN_ON(1);
+                return;
+        }
+
         /* Dig out the cycle state saved by the xHC during the stop ep cmd */
         xhci_dbg(xhci, "Finding endpoint context\n");
         ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
@@ -486,8 +489,10 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
         state->new_deq_seg = find_trb_seg(state->new_deq_seg,
                         state->new_deq_ptr,
                         &state->new_cycle_state);
-        if (!state->new_deq_seg)
-                BUG();
+        if (!state->new_deq_seg) {
+                WARN_ON(1);
+                return;
+        }
 
         trb = &state->new_deq_ptr->generic;
         if ((trb->field[3] & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK) &&
@@ -2363,12 +2368,13 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
 
                 /* Scatter gather list entries may cross 64KB boundaries */
                 running_total = TRB_MAX_BUFF_SIZE -
-                        (sg_dma_address(sg) & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+                        (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1));
+                running_total &= TRB_MAX_BUFF_SIZE - 1;
                 if (running_total != 0)
                         num_trbs++;
 
                 /* How many more 64KB chunks to transfer, how many more TRBs? */
-                while (running_total < sg_dma_len(sg)) {
+                while (running_total < sg_dma_len(sg) && running_total < temp) {
                         num_trbs++;
                         running_total += TRB_MAX_BUFF_SIZE;
                 }
@@ -2394,11 +2400,11 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
 static void check_trb_math(struct urb *urb, int num_trbs, int running_total)
 {
         if (num_trbs != 0)
-                dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated number of "
+                dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated number of "
                                 "TRBs, %d left\n", __func__,
                                 urb->ep->desc.bEndpointAddress, num_trbs);
         if (running_total != urb->transfer_buffer_length)
-                dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
+                dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
                                 "queued %#x (%d), asked for %#x (%d)\n",
                                 __func__,
                                 urb->ep->desc.bEndpointAddress,
@@ -2533,8 +2539,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
         sg = urb->sg;
         addr = (u64) sg_dma_address(sg);
         this_sg_len = sg_dma_len(sg);
-        trb_buff_len = TRB_MAX_BUFF_SIZE -
-                (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+        trb_buff_len = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1));
         trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
         if (trb_buff_len > urb->transfer_buffer_length)
                 trb_buff_len = urb->transfer_buffer_length;
@@ -2572,7 +2577,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
                                 (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
                                 (unsigned int) addr + trb_buff_len);
                 if (TRB_MAX_BUFF_SIZE -
-                                (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)) < trb_buff_len) {
+                                (addr & (TRB_MAX_BUFF_SIZE - 1)) < trb_buff_len) {
                         xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n");
                         xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n",
                                         (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
@@ -2616,7 +2621,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
                 }
 
                 trb_buff_len = TRB_MAX_BUFF_SIZE -
-                        (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+                        (addr & (TRB_MAX_BUFF_SIZE - 1));
                 trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
                 if (running_total + trb_buff_len > urb->transfer_buffer_length)
                         trb_buff_len =
@@ -2656,7 +2661,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
         num_trbs = 0;
         /* How much data is (potentially) left before the 64KB boundary? */
         running_total = TRB_MAX_BUFF_SIZE -
-                (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+                (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1));
+        running_total &= TRB_MAX_BUFF_SIZE - 1;
 
         /* If there's some data on this 64KB chunk, or we have to send a
          * zero-length transfer, we need at least one TRB
@@ -2700,8 +2706,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
         /* How much data is in the first TRB? */
         addr = (u64) urb->transfer_dma;
         trb_buff_len = TRB_MAX_BUFF_SIZE -
-                (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
-        if (urb->transfer_buffer_length < trb_buff_len)
+                (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1));
+        if (trb_buff_len > urb->transfer_buffer_length)
                 trb_buff_len = urb->transfer_buffer_length;
 
         first_trb = true;
@@ -2879,8 +2885,8 @@ static int count_isoc_trbs_needed(struct xhci_hcd *xhci,
         addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
         td_len = urb->iso_frame_desc[i].length;
 
-        running_total = TRB_MAX_BUFF_SIZE -
-                        (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+        running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1));
+        running_total &= TRB_MAX_BUFF_SIZE - 1;
         if (running_total != 0)
                 num_trbs++;
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 34cf4e165877..2083fc2179b2 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -109,7 +109,7 @@ int xhci_halt(struct xhci_hcd *xhci)
 /*
  * Set the run bit and wait for the host to be running.
  */
-int xhci_start(struct xhci_hcd *xhci)
+static int xhci_start(struct xhci_hcd *xhci)
 {
         u32 temp;
         int ret;
@@ -329,7 +329,7 @@ int xhci_init(struct usb_hcd *hcd)
 
 
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
-void xhci_event_ring_work(unsigned long arg)
+static void xhci_event_ring_work(unsigned long arg)
 {
         unsigned long flags;
         int temp;
@@ -473,7 +473,7 @@ int xhci_run(struct usb_hcd *hcd)
                         xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp));
         xhci_writel(xhci, ER_IRQ_ENABLE(temp),
                         &xhci->ir_set->irq_pending);
-        xhci_print_ir_set(xhci, xhci->ir_set, 0);
+        xhci_print_ir_set(xhci, 0);
 
         if (NUM_TEST_NOOPS > 0)
                 doorbell = xhci_setup_one_noop(xhci);
@@ -528,7 +528,7 @@ void xhci_stop(struct usb_hcd *hcd)
         temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
         xhci_writel(xhci, ER_IRQ_DISABLE(temp),
                         &xhci->ir_set->irq_pending);
-        xhci_print_ir_set(xhci, xhci->ir_set, 0);
+        xhci_print_ir_set(xhci, 0);
 
         xhci_dbg(xhci, "cleaning up memory\n");
         xhci_mem_cleanup(xhci);
@@ -755,7 +755,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
                 temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
                 xhci_writel(xhci, ER_IRQ_DISABLE(temp),
                                 &xhci->ir_set->irq_pending);
-                xhci_print_ir_set(xhci, xhci->ir_set, 0);
+                xhci_print_ir_set(xhci, 0);
 
                 xhci_dbg(xhci, "cleaning up memory\n");
                 xhci_mem_cleanup(xhci);
@@ -857,7 +857,7 @@ unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
 /* Returns 1 if the arguments are OK;
  * returns 0 this is a root hub; returns -EINVAL for NULL pointers.
  */
-int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
+static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
                 struct usb_host_endpoint *ep, int check_ep, bool check_virt_dev,
                 const char *func) {
         struct xhci_hcd *xhci;
@@ -1693,7 +1693,7 @@ static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci,
         xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags));
 }
 
-void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
+static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
                 unsigned int slot_id, unsigned int ep_index,
                 struct xhci_dequeue_state *deq_state)
 {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 7f236fd22015..7f127df6dd55 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1348,7 +1348,7 @@ static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
 }
 
 /* xHCI debugging */
-void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
+void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num);
 void xhci_print_registers(struct xhci_hcd *xhci);
 void xhci_dbg_regs(struct xhci_hcd *xhci);
 void xhci_print_run_regs(struct xhci_hcd *xhci);
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index eeba228eb2af..9d49d1cd7ce2 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -404,6 +404,7 @@ static int bfin_musb_init(struct musb *musb)
                 musb->xceiv->set_power = bfin_musb_set_power;
 
         musb->isr = blackfin_interrupt;
+        musb->double_buffer_not_ok = true;
 
         return 0;
 }
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 07cf394e491b..c292d5c499e7 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -128,12 +128,7 @@ MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
 
 static inline struct musb *dev_to_musb(struct device *dev)
 {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-        /* usbcore insists dev->driver_data is a "struct hcd *" */
-        return hcd_to_musb(dev_get_drvdata(dev));
-#else
         return dev_get_drvdata(dev);
-#endif
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1869,6 +1864,7 @@ allocate_instance(struct device *dev,
         INIT_LIST_HEAD(&musb->out_bulk);
 
         hcd->uses_new_polling = 1;
+        hcd->has_tt = 1;
 
         musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
         musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
@@ -1876,10 +1872,9 @@ allocate_instance(struct device *dev,
         musb = kzalloc(sizeof *musb, GFP_KERNEL);
         if (!musb)
                 return NULL;
-        dev_set_drvdata(dev, musb);
 
 #endif
-
+        dev_set_drvdata(dev, musb);
         musb->mregs = mbase;
         musb->ctrl_base = mbase;
         musb->nIrq = -ENODEV;
@@ -2191,7 +2186,7 @@ static int __init musb_probe(struct platform_device *pdev)
         void __iomem    *base;
 
         iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        if (!iomem || irq == 0)
+        if (!iomem || irq <= 0)
                 return -ENODEV;
 
         base = ioremap(iomem->start, resource_size(iomem));
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index d0c236f8e191..e6400be8a0f8 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -497,6 +497,19 @@ struct musb {
         struct usb_gadget_driver *gadget_driver;        /* its driver */
 #endif
 
+        /*
+         * FIXME: Remove this flag.
+         *
+         * This is only added to allow Blackfin to work
+         * with current driver. For some unknown reason
+         * Blackfin doesn't work with double buffering
+         * and that's enabled by default.
+         *
+         * We added this flag to forcefully disable double
+         * buffering until we get it working.
+         */
+        unsigned                double_buffer_not_ok:1 __deprecated;
+
         struct musb_hdrc_config *config;
 
 #ifdef MUSB_CONFIG_PROC_FS
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index 916065ba9e70..3a97c4e2d4f5 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -169,6 +169,9 @@ struct dma_controller {
                                                         dma_addr_t dma_addr,
                                                         u32 length);
         int                     (*channel_abort)(struct dma_channel *);
+        int                     (*is_compatible)(struct dma_channel *channel,
+                                                        u16 maxpacket,
+                                                        void *buf, u32 length);
 };
 
 /* called after channel_program(), may indicate a fault */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index ed58c6c8f15c..2fe304611dcf 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -92,11 +92,33 @@
 
 /* ----------------------------------------------------------------------- */
 
+#define is_buffer_mapped(req) (is_dma_capable() && \
+                                        (req->map_state != UN_MAPPED))
+
 /* Maps the buffer to dma  */
 
 static inline void map_dma_buffer(struct musb_request *request,
-                                struct musb *musb)
+                        struct musb *musb, struct musb_ep *musb_ep)
 {
+        int compatible = true;
+        struct dma_controller *dma = musb->dma_controller;
+
+        request->map_state = UN_MAPPED;
+
+        if (!is_dma_capable() || !musb_ep->dma)
+                return;
+
+        /* Check if DMA engine can handle this request.
+         * DMA code must reject the USB request explicitly.
+         * Default behaviour is to map the request.
+         */
+        if (dma->is_compatible)
+                compatible = dma->is_compatible(musb_ep->dma,
+                                musb_ep->packet_sz, request->request.buf,
+                                request->request.length);
+        if (!compatible)
+                return;
+
         if (request->request.dma == DMA_ADDR_INVALID) {
                 request->request.dma = dma_map_single(
                                 musb->controller,
@@ -105,7 +127,7 @@ static inline void map_dma_buffer(struct musb_request *request,
                                 request->tx
                                         ? DMA_TO_DEVICE
                                         : DMA_FROM_DEVICE);
-                request->mapped = 1;
+                request->map_state = MUSB_MAPPED;
         } else {
                 dma_sync_single_for_device(musb->controller,
                         request->request.dma,
@@ -113,7 +135,7 @@ static inline void map_dma_buffer(struct musb_request *request,
                         request->tx
                                 ? DMA_TO_DEVICE
                                 : DMA_FROM_DEVICE);
-                request->mapped = 0;
+                request->map_state = PRE_MAPPED;
         }
 }
 
@@ -121,11 +143,14 @@ static inline void map_dma_buffer(struct musb_request *request,
 static inline void unmap_dma_buffer(struct musb_request *request,
                                 struct musb *musb)
 {
+        if (!is_buffer_mapped(request))
+                return;
+
         if (request->request.dma == DMA_ADDR_INVALID) {
                 DBG(20, "not unmapping a never mapped buffer\n");
                 return;
         }
-        if (request->mapped) {
+        if (request->map_state == MUSB_MAPPED) {
                 dma_unmap_single(musb->controller,
                         request->request.dma,
                         request->request.length,
@@ -133,16 +158,15 @@ static inline void unmap_dma_buffer(struct musb_request *request,
                                 ? DMA_TO_DEVICE
                                 : DMA_FROM_DEVICE);
                 request->request.dma = DMA_ADDR_INVALID;
-                request->mapped = 0;
-        } else {
+        } else { /* PRE_MAPPED */
                 dma_sync_single_for_cpu(musb->controller,
                         request->request.dma,
                         request->request.length,
                         request->tx
                                 ? DMA_TO_DEVICE
                                 : DMA_FROM_DEVICE);
-
         }
+        request->map_state = UN_MAPPED;
 }
 
 /*
@@ -172,8 +196,7 @@ __acquires(ep->musb->lock)
 
         ep->busy = 1;
         spin_unlock(&musb->lock);
-        if (is_dma_capable() && ep->dma)
-                unmap_dma_buffer(req, musb);
+        unmap_dma_buffer(req, musb);
         if (request->status == 0)
                 DBG(5, "%s done request %p,  %d/%d\n",
                                 ep->end_point.name, request,
@@ -335,7 +358,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
                         csr);
 
 #ifndef CONFIG_MUSB_PIO_ONLY
-        if (is_dma_capable() && musb_ep->dma) {
+        if (is_buffer_mapped(req)) {
                 struct dma_controller   *c = musb->dma_controller;
                 size_t request_size;
 
@@ -436,8 +459,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
                  * Unmap the dma buffer back to cpu if dma channel
                  * programming fails
                  */
-                if (is_dma_capable() && musb_ep->dma)
-                        unmap_dma_buffer(req, musb);
+                unmap_dma_buffer(req, musb);
 
                 musb_write_fifo(musb_ep->hw_ep, fifo_count,
                                 (u8 *) (request->buf + request->actual));
@@ -627,7 +649,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
                 return;
         }
 
-        if (is_cppi_enabled() && musb_ep->dma) {
+        if (is_cppi_enabled() && is_buffer_mapped(req)) {
                 struct dma_controller   *c = musb->dma_controller;
                 struct dma_channel      *channel = musb_ep->dma;
 
@@ -658,7 +680,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
                 len = musb_readw(epio, MUSB_RXCOUNT);
                 if (request->actual < request->length) {
 #ifdef CONFIG_USB_INVENTRA_DMA
-                        if (is_dma_capable() && musb_ep->dma) {
+                        if (is_buffer_mapped(req)) {
                                 struct dma_controller   *c;
                                 struct dma_channel      *channel;
                                 int                     use_dma = 0;
@@ -742,7 +764,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
                         fifo_count = min_t(unsigned, len, fifo_count);
 
 #ifdef  CONFIG_USB_TUSB_OMAP_DMA
-                        if (tusb_dma_omap() && musb_ep->dma) {
+                        if (tusb_dma_omap() && is_buffer_mapped(req)) {
                                 struct dma_controller *c = musb->dma_controller;
                                 struct dma_channel *channel = musb_ep->dma;
                                 u32 dma_addr = request->dma + request->actual;
@@ -762,7 +784,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
                          * programming fails. This buffer is mapped if the
                          * channel allocation is successful
                          */
-                         if (is_dma_capable() && musb_ep->dma) {
+                         if (is_buffer_mapped(req)) {
                                 unmap_dma_buffer(req, musb);
 
                                 /*
@@ -989,7 +1011,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
                 /* Set TXMAXP with the FIFO size of the endpoint
                  * to disable double buffering mode.
                  */
-                musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+                if (musb->double_buffer_not_ok)
+                        musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
+                else
+                        musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
+                                        | (musb_ep->hb_mult << 11));
 
                 csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
                 if (musb_readw(regs, MUSB_TXCSR)
@@ -1025,7 +1051,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
                 /* Set RXMAXP with the FIFO size of the endpoint
                  * to disable double buffering mode.
                  */
-                musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+                if (musb->double_buffer_not_ok)
+                        musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx);
+                else
+                        musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
+                                        | (musb_ep->hb_mult << 11));
 
                 /* force shared fifo to OUT-only mode */
                 if (hw_ep->is_shared_fifo) {
@@ -1214,10 +1244,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
         request->epnum = musb_ep->current_epnum;
         request->tx = musb_ep->is_in;
 
-        if (is_dma_capable() && musb_ep->dma)
-                map_dma_buffer(request, musb);
-        else
-                request->mapped = 0;
+        map_dma_buffer(request, musb, musb_ep);
 
         spin_lock_irqsave(&musb->lock, lockflags);
 
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
index dec8dc008191..a55354fbccf5 100644
--- a/drivers/usb/musb/musb_gadget.h
+++ b/drivers/usb/musb/musb_gadget.h
@@ -35,13 +35,19 @@
 #ifndef __MUSB_GADGET_H
 #define __MUSB_GADGET_H
 
+enum buffer_map_state {
+        UN_MAPPED = 0,
+        PRE_MAPPED,
+        MUSB_MAPPED
+};
+
 struct musb_request {
         struct usb_request      request;
         struct musb_ep          *ep;
         struct musb             *musb;
         u8 tx;                  /* endpoint direction */
         u8 epnum;
-        u8 mapped;
+        enum buffer_map_state map_state;
 };
 
 static inline struct musb_request *to_musb_request(struct usb_request *req)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 4d5bcb4e14d2..0f523d7db57b 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -609,7 +609,7 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
         /* Set RXMAXP with the FIFO size of the endpoint
          * to disable double buffer mode.
          */
-        if (musb->hwvers < MUSB_HWVERS_2000)
+        if (musb->double_buffer_not_ok)
                 musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx);
         else
                 musb_writew(ep->regs, MUSB_RXMAXP,
@@ -784,14 +784,13 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
                 /* protocol/endpoint/interval/NAKlimit */
                 if (epnum) {
                         musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
-                        if (can_bulk_split(musb, qh->type))
+                        if (musb->double_buffer_not_ok)
                                 musb_writew(epio, MUSB_TXMAXP,
-                                        packet_sz
-                                        | ((hw_ep->max_packet_sz_tx /
-                                                packet_sz) - 1) << 11);
+                                                hw_ep->max_packet_sz_tx);
                         else
                                 musb_writew(epio, MUSB_TXMAXP,
-                                        packet_sz);
+                                                qh->maxpacket |
+                                                ((qh->hb_mult - 1) << 11));
                         musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
                 } else {
                         musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index f763d62f151c..21056c924c74 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -94,24 +94,33 @@ static inline void musb_write_hsdma_addr(void __iomem *mbase,
 {
         musb_writew(mbase,
                 MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW),
-                ((u16)((u32) dma_addr & 0xFFFF)));
+                dma_addr);
         musb_writew(mbase,
                 MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH),
-                ((u16)(((u32) dma_addr >> 16) & 0xFFFF)));
+                (dma_addr >> 16));
 }
 
 static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel)
 {
-        return musb_readl(mbase,
+        u32 count = musb_readw(mbase,
                 MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH));
+
+        count = count << 16;
+
+        count |= musb_readw(mbase,
+                MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW));
+
+        return count;
 }
 
 static inline void musb_write_hsdma_count(void __iomem *mbase,
                                 u8 bchannel, u32 len)
 {
-        musb_writel(mbase,
+        musb_writew(mbase,
+                MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len);
+        musb_writew(mbase,
                 MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
-                len);
+                (len >> 16));
 }
 
 #endif /* CONFIG_BLACKFIN */
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index a3f12333fc41..bc8badd16897 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -362,6 +362,7 @@ static int omap2430_musb_init(struct musb *musb)
 
 static int omap2430_musb_exit(struct musb *musb)
 {
+        del_timer_sync(&musb_idle_timer);
 
         omap2430_low_level_exit(musb);
         otg_put_transceiver(musb->xceiv);
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 9fb875d5f09c..9ffc8237fb4b 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -103,6 +103,8 @@ config USB_MSM_OTG_72K
           required after resetting the hardware and power management.
           This driver is required even for peripheral only or host only
           mode configurations.
+          This driver is not supported on boards like trout which
+          has an external PHY.
 
 config AB8500_USB
         tristate "AB8500 USB Transceiver Driver"
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4787c0cd063f..f349a3629d00 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -100,6 +100,7 @@ struct ftdi_sio_quirk {
 static int   ftdi_jtag_probe(struct usb_serial *serial);
 static int   ftdi_mtxorb_hack_setup(struct usb_serial *serial);
 static int   ftdi_NDI_device_setup(struct usb_serial *serial);
+static int   ftdi_stmclite_probe(struct usb_serial *serial);
 static void  ftdi_USB_UIRT_setup(struct ftdi_private *priv);
 static void  ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
 
@@ -123,6 +124,10 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
         .port_probe = ftdi_HE_TIRA1_setup,
 };
 
+static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
+        .probe  = ftdi_stmclite_probe,
+};
+
 /*
  * The 8U232AM has the same API as the sio except for:
  * - it can support MUCH higher baudrates; up to:
@@ -616,6 +621,7 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
         { USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
+        { USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
         { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
         { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
         { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
@@ -810,6 +816,8 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
         { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+        { USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
         { },                                    /* Optional parameter entry */
         { }                                     /* Terminating entry */
 };
@@ -1709,6 +1717,25 @@ static int ftdi_jtag_probe(struct usb_serial *serial)
 }
 
 /*
+ * First and second port on STMCLiteadaptors is reserved for JTAG interface
+ * and the forth port for pio
+ */
+static int ftdi_stmclite_probe(struct usb_serial *serial)
+{
+        struct usb_device *udev = serial->dev;
+        struct usb_interface *interface = serial->interface;
+
+        dbg("%s", __func__);
+
+        if (interface == udev->actconfig->interface[2])
+                return 0;
+
+        dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+
+        return -ENODEV;
+}
+
+/*
  * The Matrix Orbital VK204-25-USB has an invalid IN endpoint.
  * We have to correct it if we want to read from it.
  */
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index ed160def8584..117e8e6f93c6 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -518,6 +518,12 @@
 #define RATOC_PRODUCT_ID_USB60F 0xb020
 
 /*
+ * Acton Research Corp.
+ */
+#define ACTON_VID               0x0647  /* Vendor ID */
+#define ACTON_SPECTRAPRO_PID    0x0100
+
+/*
  * Contec products (http://www.contec.com)
  * Submitted by Daniel Sangorrin
  */
@@ -1034,6 +1040,12 @@
 #define WHT_PID                 0x0004 /* Wireless Handheld Terminal */
 
 /*
+ * STMicroelectonics
+ */
+#define ST_VID                  0x0483
+#define ST_STMCLT1030_PID       0x3747 /* ST Micro Connect Lite STMCLT1030 */
+
+/*
  * Papouch products (http://www.papouch.com/)
  * Submitted by Folkert van Heusden
  */
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index cd769ef24f8a..3b246d93cf22 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2889,8 +2889,8 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
 
         dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build);
 
-        edge_serial->product_info.FirmwareMajorVersion = fw->data[0];
-        edge_serial->product_info.FirmwareMinorVersion = fw->data[1];
+        edge_serial->product_info.FirmwareMajorVersion = rec->data[0];
+        edge_serial->product_info.FirmwareMinorVersion = rec->data[1];
         edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build);
 
         for (rec = ihex_next_binrec(rec); rec;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 7481ff8a49e4..0457813eebee 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -301,6 +301,9 @@ static const struct usb_device_id id_table[] = {
         { USB_DEVICE(0x1199, 0x68A3),   /* Sierra Wireless Direct IP modems */
           .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
         },
+        { USB_DEVICE(0x0f3d, 0x68A3),   /* Airprime/Sierra Wireless Direct IP modems */
+          .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+        },
        { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
 
         { }
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index b2902f307b47..a910004f4079 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -369,9 +369,9 @@ failed_1port:
 
 static void __exit ti_exit(void)
 {
+        usb_deregister(&ti_usb_driver);
         usb_serial_deregister(&ti_1port_device);
         usb_serial_deregister(&ti_2port_device);
-        usb_deregister(&ti_usb_driver);
 }
 
 
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index b004b2a485c3..9c014e2ecd68 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -295,12 +295,15 @@ static void usb_wwan_indat_callback(struct urb *urb)
                     __func__, status, endpoint);
         } else {
                 tty = tty_port_tty_get(&port->port);
-                if (urb->actual_length) {
-                        tty_insert_flip_string(tty, data, urb->actual_length);
-                        tty_flip_buffer_push(tty);
-                } else
-                        dbg("%s: empty read urb received", __func__);
-                tty_kref_put(tty);
+                if (tty) {
+                        if (urb->actual_length) {
+                                tty_insert_flip_string(tty, data,
+                                                urb->actual_length);
+                                tty_flip_buffer_push(tty);
+                        } else
+                                dbg("%s: empty read urb received", __func__);
+                        tty_kref_put(tty);
+                }
 
                 /* Resubmit urb so we continue receiving */
                 if (status != -ESHUTDOWN) {
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 15a5d89b7f39..1c11959a7d58 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -27,6 +27,7 @@
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/usb/cdc.h>
 #include "visor.h"
 
 /*
@@ -479,6 +480,17 @@ static int visor_probe(struct usb_serial *serial,
 
         dbg("%s", __func__);
 
+        /*
+         * some Samsung Android phones in modem mode have the same ID
+         * as SPH-I500, but they are ACM devices, so dont bind to them
+         */
+        if (id->idVendor == SAMSUNG_VENDOR_ID &&
+                id->idProduct == SAMSUNG_SPH_I500_ID &&
+                serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM &&
+                serial->dev->descriptor.bDeviceSubClass ==
+                        USB_CDC_SUBCLASS_ACM)
+                return -ENODEV;
+
         if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
                 dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
                         serial->dev->actconfig->desc.bConfigurationValue);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 24bd5d7c3deb..c1602b8c5594 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1397,6 +1397,13 @@ UNUSUAL_DEV(  0x0f19, 0x0105, 0x0100, 0x0100,
                 USB_SC_DEVICE, USB_PR_DEVICE, NULL,
                 US_FL_IGNORE_RESIDUE ),
 
+/* Submitted by Nick Holloway */
+UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100,
+                "VTech",
+                "Kidizoom",
+                USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY ),
+
 /* Reported by Michael Stattmann <michael@stattmann.com> */
 UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
                 "Sony Ericsson",
@@ -1890,6 +1897,13 @@ UNUSUAL_DEV(  0x1e68, 0x001b, 0x0000, 0x0000,
                 USB_SC_DEVICE, USB_PR_DEVICE, NULL,
                 US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
 
+/* Reported by Jasper Mackenzie <scarletpimpernal@hotmail.com> */
+UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000,
+                "Coby Electronics",
+                "MP3 Player",
+                USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+                US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+
 UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
                 "ST",
                 "2A",